diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mmc/mtk-sd.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/mtk-sd.txt | 75 |
1 files changed, 0 insertions, 75 deletions
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt deleted file mode 100644 index 26a8f320a156..000000000000 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt +++ /dev/null @@ -1,75 +0,0 @@ -* MTK MMC controller - -The MTK MSDC can act as a MMC controller -to support MMC, SD, and SDIO types of memory cards. - -This file documents differences between the core properties in mmc.txt -and the properties used by the msdc driver. - -Required properties: -- compatible: value should be either of the following. - "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 - "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 - "mediatek,mt8183-mmc": for mmc host ip compatible with mt8183 - "mediatek,mt8516-mmc": for mmc host ip compatible with mt8516 - "mediatek,mt6779-mmc": for mmc host ip compatible with mt6779 - "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 - "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 - "mediatek,mt7622-mmc": for MT7622 SoC - "mediatek,mt7623-mmc", "mediatek,mt2701-mmc": for MT7623 SoC - "mediatek,mt7620-mmc", for MT7621 SoC (and others) - -- reg: physical base address of the controller and length -- interrupts: Should contain MSDC interrupt number -- clocks: Should contain phandle for the clock feeding the MMC controller -- clock-names: Should contain the following: - "source" - source clock (required) - "hclk" - HCLK which used for host (required) - "source_cg" - independent source clock gate (required for MT2712) - "bus_clk" - bus clock used for internal register access (required for MT2712 MSDC0/3) -- pinctrl-names: should be "default", "state_uhs" -- pinctrl-0: should contain default/high speed pin ctrl -- pinctrl-1: should contain uhs mode pin ctrl -- vmmc-supply: power to the Core -- vqmmc-supply: power to the IO - -Optional properties: -- assigned-clocks: PLL of the source clock -- assigned-clock-parents: parent of source clock, used for HS400 mode to get 400Mhz source clock -- hs400-ds-delay: HS400 DS delay setting -- mediatek,hs200-cmd-int-delay: HS200 command internal delay setting. - This field has total 32 stages. - The value is an integer from 0 to 31. -- mediatek,hs400-cmd-int-delay: HS400 command internal delay setting - This field has total 32 stages. - The value is an integer from 0 to 31. -- mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection - If present,HS400 command responses are sampled on rising edges. - If not present,HS400 command responses are sampled on falling edges. -- mediatek,latch-ck: Some SoCs do not support enhance_rx, need set correct latch-ck to avoid data crc - error caused by stop clock(fifo full) - Valid range = [0:0x7]. if not present, default value is 0. - applied to compatible "mediatek,mt2701-mmc". -- resets: Phandle and reset specifier pair to softreset line of MSDC IP. -- reset-names: Should be "hrst". - -Examples: -mmc0: mmc@11230000 { - compatible = "mediatek,mt8173-mmc", "mediatek,mt8135-mmc"; - reg = <0 0x11230000 0 0x108>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>; - vmmc-supply = <&mt6397_vemc_3v3_reg>; - vqmmc-supply = <&mt6397_vio18_reg>; - clocks = <&pericfg CLK_PERI_MSDC30_0>, - <&topckgen CLK_TOP_MSDC50_0_H_SEL>; - clock-names = "source", "hclk"; - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&mmc0_pins_default>; - pinctrl-1 = <&mmc0_pins_uhs>; - assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; - hs400-ds-delay = <0x14015>; - mediatek,hs200-cmd-int-delay = <26>; - mediatek,hs400-cmd-int-delay = <14>; - mediatek,hs400-cmd-resp-sel-rising; -}; |