1 files changed, 0 insertions, 72 deletions
diff --git a/Documentation/devicetree/bindings/media/ti-cal.txt b/Documentation/devicetree/bindings/media/ti-cal.txt
deleted file mode 100644
index ae9b52f37576..000000000000
--- a/Documentation/devicetree/bindings/media/ti-cal.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL)
-------------------------------------------------------
-
-The Camera Adaptation Layer (CAL) is a key component for image capture
-applications. The capture module provides the system interface and the
-processing capability to connect CSI2 image-sensor modules to the
-DRA72x device.
-
-Required properties:
-- compatible: must be "ti,dra72-cal"
-- reg:	CAL Top level, Receiver Core #0, Receiver Core #1 and Camera RX
-	control address space
-- reg-names: cal_top, cal_rx_core0, cal_rx_core1, and camerrx_control
-	     registers
-- interrupts: should contain IRQ line for the CAL;
-
-CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes
-should contain a 'port' child node with child 'endpoint' node. Please
-refer to the bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-	cal: cal@4845b000 {
-		compatible = "ti,dra72-cal";
-		ti,hwmods = "cal";
-		reg = <0x4845B000 0x400>,
-		      <0x4845B800 0x40>,
-		      <0x4845B900 0x40>,
-		      <0x4A002e94 0x4>;
-		reg-names = "cal_top",
-			    "cal_rx_core0",
-			    "cal_rx_core1",
-			    "camerrx_control";
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			csi2_0: port@0 {
-				reg = <0>;
-				endpoint {
-					slave-mode;
-					remote-endpoint = <&ar0330_1>;
-				};
-			};
-			csi2_1: port@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	i2c5: i2c@4807c000 {
-		ar0330@10 {
-			compatible = "ti,ar0330";
-			reg = <0x10>;
-
-			port {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ar0330_1: endpoint {
-					reg = <0>;
-					clock-lanes = <1>;
-					data-lanes = <0 2 3 4>;
-					remote-endpoint = <&csi2_0>;
-				};
-			};
-		};
-	};