1 files changed, 0 insertions, 72 deletions
diff --git a/Documentation/devicetree/bindings/media/amlogic,vdec.txt b/Documentation/devicetree/bindings/media/amlogic,vdec.txt
deleted file mode 100644
index 9b6aace86ca7..000000000000
--- a/Documentation/devicetree/bindings/media/amlogic,vdec.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-Amlogic Video Decoder
-================================
-
-The video decoding IP lies within the DOS memory region,
-except for the hardware bitstream parser that makes use of an undocumented
-region.
-
-It makes use of the following blocks:
-
-- ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks
-then feed from this VIFIFO.
-- VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1.
-- VDEC_HEVC can decode HEVC and VP9.
-
-Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run
-concurrently.
-
-Device Tree Bindings:
----------------------
-
-VDEC: Video Decoder
---------------------------
-
-Required properties:
-- compatible: value should be different for each SoC family as :
-	- GXBB (S905) : "amlogic,gxbb-vdec"
-	- GXL (S905X, S905D) : "amlogic,gxl-vdec"
-	- GXM (S912) : "amlogic,gxm-vdec"
-	followed by the common "amlogic,gx-vdec"
-- reg: base address and size of he following memory-mapped regions :
-	- dos
-	- esparser
-- reg-names: should contain the names of the previous memory regions
-- interrupts: should contain the following IRQs:
-	- vdec
-	- esparser
-- interrupt-names: should contain the names of the previous interrupts
-- amlogic,ao-sysctrl: should point to the AOBUS sysctrl node
-- amlogic,canvas: should point to a canvas provider node
-- clocks: should contain the following clocks :
-	- dos_parser
-	- dos
-	- vdec_1
-	- vdec_hevc
-- clock-names: should contain the names of the previous clocks
-- resets: should contain the parser reset
-- reset-names: should be "esparser"
-
-Example:
-
-vdec: video-codec@c8820000 {
-	compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec";
-	reg = <0x0 0xc8820000 0x0 0x10000>,
-	      <0x0 0xc110a580 0x0 0xe4>;
-	reg-names = "dos", "esparser";
-
-	interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
-		     <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
-	interrupt-names = "vdec", "esparser";
-
-	amlogic,ao-sysctrl = <&sysctrl_AO>;
-	amlogic,canvas = <&canvas>;
-
-	clocks = <&clkc CLKID_DOS_PARSER>,
-		 <&clkc CLKID_DOS>,
-		 <&clkc CLKID_VDEC_1>,
-		 <&clkc CLKID_VDEC_HEVC>;
-	clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
-
-	resets = <&reset RESET_PARSER>;
-	reset-names = "esparser";
-};