diff options
Diffstat (limited to 'Documentation/devicetree/bindings/leds/leds-lp55xx.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/leds/leds-lp55xx.txt | 228 |
1 files changed, 0 insertions, 228 deletions
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt deleted file mode 100644 index 1b66a413fb9d..000000000000 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt +++ /dev/null @@ -1,228 +0,0 @@ -Binding for TI/National Semiconductor LP55xx Led Drivers - -Required properties: -- compatible: one of - national,lp5521 - national,lp5523 - ti,lp55231 - ti,lp5562 - ti,lp8501 - -- reg: I2C slave address -- clock-mode: Input clock mode, (0: automode, 1: internal, 2: external) - -Each child has own specific current settings -- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected) -- max-cur: Maximun current at each led channel. - -Optional properties: -- enable-gpio: GPIO attached to the chip's enable pin -- label: Used for naming LEDs -- pwr-sel: LP8501 specific property. Power selection for output channels. - 0: D1~9 are connected to VDD - 1: D1~6 with VDD, D7~9 with VOUT - 2: D1~6 with VOUT, D7~9 with VDD - 3: D1~9 are connected to VOUT - -Alternatively, each child can have a specific channel name and trigger: -- chan-name (optional): name of channel -- linux,default-trigger (optional): see - Documentation/devicetree/bindings/leds/common.txt - -example 1) LP5521 -3 LED channels, external clock used. Channel names are 'lp5521_pri:channel0', -'lp5521_pri:channel1' and 'lp5521_pri:channel2', with a heartbeat trigger -on channel 0. - -lp5521@32 { - compatible = "national,lp5521"; - reg = <0x32>; - label = "lp5521_pri"; - clock-mode = /bits/ 8 <2>; - - chan0 { - led-cur = /bits/ 8 <0x2f>; - max-cur = /bits/ 8 <0x5f>; - linux,default-trigger = "heartbeat"; - }; - - chan1 { - led-cur = /bits/ 8 <0x2f>; - max-cur = /bits/ 8 <0x5f>; - }; - - chan2 { - led-cur = /bits/ 8 <0x2f>; - max-cur = /bits/ 8 <0x5f>; - }; -}; - -example 2) LP5523 -9 LED channels with specific name. Internal clock used. -The I2C slave address is configurable with ASEL1 and ASEL0 pins. -Available addresses are 32/33/34/35h. - -ASEL1 ASEL0 Address -------------------------- - GND GND 32h - GND VEN 33h - VEN GND 34h - VEN VEN 35h - -lp5523@32 { - compatible = "national,lp5523"; - reg = <0x32>; - clock-mode = /bits/ 8 <1>; - - chan0 { - chan-name = "d1"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan1 { - chan-name = "d2"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan2 { - chan-name = "d3"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan3 { - chan-name = "d4"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan4 { - chan-name = "d5"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan5 { - chan-name = "d6"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan6 { - chan-name = "d7"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan7 { - chan-name = "d8"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan8 { - chan-name = "d9"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; -}; - -example 3) LP5562 -4 channels are defined. - -lp5562@30 { - compatible = "ti,lp5562"; - reg = <0x30>; - clock-mode = /bits/8 <2>; - - chan0 { - chan-name = "R"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; - - chan1 { - chan-name = "G"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; - - chan2 { - chan-name = "B"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; - - chan3 { - chan-name = "W"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; -}; - -example 4) LP8501 -9 channels are defined. The 'pwr-sel' is LP8501 specific property. -Others are same as LP5523. - -lp8501@32 { - compatible = "ti,lp8501"; - reg = <0x32>; - clock-mode = /bits/ 8 <2>; - pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */ - - chan0 { - chan-name = "d1"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan1 { - chan-name = "d2"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan2 { - chan-name = "d3"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan3 { - chan-name = "d4"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan4 { - chan-name = "d5"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan5 { - chan-name = "d6"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan6 { - chan-name = "d7"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan7 { - chan-name = "d8"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan8 { - chan-name = "d9"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; -}; |