1 files changed, 0 insertions, 39 deletions
diff --git a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt
deleted file mode 100644
index 89647d714387..000000000000
--- a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-I/O channel multiplexer bindings
-
-If a multiplexer is used to select which hardware signal is fed to
-e.g. an ADC channel, these bindings describe that situation.
-
-Required properties:
-- compatible : "io-channel-mux"
-- io-channels : Channel node of the parent channel that has multiplexed
-		input.
-- io-channel-names : Should be "parent".
-- #address-cells = <1>;
-- #size-cells = <0>;
-- mux-controls : Mux controller node to use for operating the mux
-- channels : List of strings, labeling the mux controller states.
-
-For each non-empty string in the channels property, an io-channel will
-be created. The number of this io-channel is the same as the index into
-the list of strings in the channels property, and also matches the mux
-controller state. The mux controller state is described in
-../mux/mux-controller.txt
-
-Example:
-	mux: mux-controller {
-		compatible = "gpio-mux";
-		#mux-control-cells = <0>;
-
-		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
-			    <&pioA 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	adc-mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 0>;
-		io-channel-names = "parent";
-
-		mux-controls = <&mux>;
-
-		channels = "sync", "in", "system-regulator";
-	};