diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/adc/vf610-adc.txt')
-rw-r--r-- | Documentation/devicetree/bindings/iio/adc/vf610-adc.txt | 36 |
1 files changed, 0 insertions, 36 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt deleted file mode 100644 index 1aad0514e647..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt +++ /dev/null @@ -1,36 +0,0 @@ -Freescale vf610 Analog to Digital Converter bindings - -The devicetree bindings are for the new ADC driver written for -vf610/i.MX6slx and upward SoCs from Freescale. - -Required properties: -- compatible: Should contain "fsl,vf610-adc" -- reg: Offset and length of the register set for the device -- interrupts: Should contain the interrupt for the device -- clocks: The clock is needed by the ADC controller, ADC clock source is ipg clock. -- clock-names: Must contain "adc", matching entry in the clocks property. -- vref-supply: The regulator supply ADC reference voltage. - -Recommended properties: -- fsl,adck-max-frequency: Maximum frequencies according to datasheets operating - requirements. Three values are required, depending on conversion mode: - - Frequency in normal mode (ADLPC=0, ADHSC=0) - - Frequency in high-speed mode (ADLPC=0, ADHSC=1) - - Frequency in low-power mode (ADLPC=1, ADHSC=0) -- min-sample-time: Minimum sampling time in nanoseconds. This value has - to be chosen according to the conversion mode and the connected analog - source resistance (R_as) and capacitance (C_as). Refer the datasheet's - operating requirements. A safe default across a wide range of R_as and - C_as as well as conversion modes is 1000ns. - -Example: -adc0: adc@4003b000 { - compatible = "fsl,vf610-adc"; - reg = <0x4003b000 0x1000>; - interrupts = <0 53 0x04>; - clocks = <&clks VF610_CLK_ADC0>; - clock-names = "adc"; - fsl,adck-max-frequency = <30000000>, <40000000>, - <20000000>; - vref-supply = <®_vcc_3v3_mcu>; -}; |