1 files changed, 0 insertions, 39 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
deleted file mode 100644
index b2033fc3a71a..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Aspeed GPIO controller Device Tree Bindings
--------------------------------------------
-
-Required properties:
-- compatible		: Either "aspeed,ast2400-gpio", "aspeed,ast2500-gpio",
-					or "aspeed,ast2600-gpio".
-
-- #gpio-cells 		: Should be two
-			  - First cell is the GPIO line number
-			  - Second cell is used to specify optional
-			    parameters (unused)
-
-- reg			: Address and length of the register set for the device
-- gpio-controller	: Marks the device node as a GPIO controller.
-- interrupts		: Interrupt specifier (see interrupt bindings for
-			  details)
-- interrupt-controller	: Mark the GPIO controller as an interrupt-controller
-
-Optional properties:
-
-- clocks		: A phandle to the clock to use for debounce timings
-- ngpios		: Number of GPIOs controlled by this controller. Should	be set
-				  when there are multiple GPIO controllers on a SoC (ast2600).
-
-The gpio and interrupt properties are further described in their respective
-bindings documentation:
-
-- Documentation/devicetree/bindings/gpio/gpio.txt
-- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-  Example:
-	gpio@1e780000 {
-		#gpio-cells = <2>;
-		compatible = "aspeed,ast2400-gpio";
-		gpio-controller;
-		interrupts = <20>;
-		reg = <0x1e780000 0x1000>;
-		interrupt-controller;
-	};