1 files changed, 0 insertions, 76 deletions
diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
deleted file mode 100644
index 208daaff0be4..000000000000
--- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-Cirrus Logic Arizona class audio SoCs
-
-These devices are audio SoCs with extensive digital capabilities and a range
-of analogue I/O.
-
-This document lists Extcon specific bindings, see the primary binding document:
-  ../mfd/arizona.txt
-
-Optional properties:
-
-  - wlf,hpdet-channel : Headphone detection channel.
-    ARIZONA_ACCDET_MODE_HPL or 1 - Headphone detect mode is set to HPDETL
-    ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR
-    If this node is not mentioned or if the value is unknown, then
-    headphone detection mode is set to HPDETL.
-
-  - wlf,use-jd2 : Use the additional JD input along with JD1 for dual pin jack
-    detection.
-  - wlf,use-jd2-nopull : Internal pull on JD2 is disabled when used for
-    jack detection.
-  - wlf,jd-invert : Invert the polarity of the jack detection switch
-
-  - wlf,micd-software-compare : Use a software comparison to determine mic
-    presence
-  - wlf,micd-detect-debounce : Additional software microphone detection
-    debounce specified in milliseconds.
-  - wlf,micd-pol-gpio : GPIO specifier for the GPIO controlling the headset
-    polarity if one exists.
-  - wlf,micd-bias-start-time : Time allowed for MICBIAS to startup prior to
-    performing microphone detection, specified as per the ARIZONA_MICD_TIME_XXX
-    defines.
-  - wlf,micd-rate : Delay between successive microphone detection measurements,
-    specified as per the ARIZONA_MICD_TIME_XXX defines.
-  - wlf,micd-dbtime : Microphone detection hardware debounces specified as the
-    number of measurements to take, valid values being 2 and 4.
-  - wlf,micd-timeout-ms : Timeout for microphone detection, specified in
-    milliseconds.
-  - wlf,micd-force-micbias : Force MICBIAS continuously on during microphone
-    detection.
-  - wlf,micd-configs : Headset polarity configurations (generally used for
-    detection of CTIA / OMTP headsets), the field can be of variable length
-    but should always be a multiple of 3 cells long, each three cell group
-    represents one polarity configuration.
-    The first cell defines the accessory detection pin, zero will use MICDET1
-    and all other values will use MICDET2.
-    The second cell represents the MICBIAS to be used.
-    The third cell represents the value of the micd-pol-gpio pin.
-
-  - wlf,gpsw : Settings for the general purpose switch, set as one of the
-    ARIZONA_GPSW_XXX defines.
-
-Example:
-
-codec: wm8280@0 {
-	compatible = "wlf,wm8280";
-	reg = <0>;
-	...
-
-	wlf,use-jd2;
-	wlf,use-jd2-nopull;
-	wlf,jd-invert;
-
-	wlf,micd-software-compare;
-	wlf,micd-detect-debounce = <0>;
-	wlf,micd-pol-gpio = <&codec 2 0>;
-	wlf,micd-rate = <ARIZONA_MICD_TIME_8MS>;
-	wlf,micd-dbtime = <4>;
-	wlf,micd-timeout-ms = <100>;
-	wlf,micd-force-micbias;
-	wlf,micd-configs = <
-		0 1 0 /* MICDET1 MICBIAS1 GPIO=low */
-		1 2 1 /* MICDET2 MICBIAS2 GPIO=high */
-	>;
-
-	wlf,gpsw = <ARIZONA_GPSW_OPEN>;
-};