1 files changed, 0 insertions, 81 deletions
diff --git a/Documentation/devicetree/bindings/dma/mmp-dma.txt b/Documentation/devicetree/bindings/dma/mmp-dma.txt
deleted file mode 100644
index ec18bf0a802a..000000000000
--- a/Documentation/devicetree/bindings/dma/mmp-dma.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-* MARVELL MMP DMA controller
-
-Marvell Peripheral DMA Controller
-Used platforms: pxa688, pxa910, pxa3xx, etc
-
-Required properties:
-- compatible: Should be "marvell,pdma-1.0"
-- reg: Should contain DMA registers location and length.
-- interrupts: Either contain all of the per-channel DMA interrupts
-		or one irq for pdma device
-
-Optional properties:
-- dma-channels: Number of DMA channels supported by the controller (defaults
-  to 32 when not specified)
-- #dma-channels: deprecated
-- dma-requests: Number of DMA requestor lines supported by the controller
-  (defaults to 32 when not specified)
-- #dma-requests: deprecated
-
-"marvell,pdma-1.0"
-Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.
-
-Examples:
-
-/*
- * Each channel has specific irq
- * ICU parse out irq channel from ICU register,
- * while DMA controller may not able to distinguish the irq channel
- * Using this method, interrupt-parent is required as demuxer
- * For example, pxa688 icu register 0x128, bit 0~15 is PDMA channel irq,
- * 18~21 is ADMA irq
- */
-pdma: dma-controller@d4000000 {
-	      compatible = "marvell,pdma-1.0";
-	      reg = <0xd4000000 0x10000>;
-	      interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
-	      interrupt-parent = <&intcmux32>;
-	      dma-channels = <16>;
-      };
-
-/*
- * One irq for all channels
- * Dmaengine driver (DMA controller) distinguish irq channel via
- * parsing internal register
- */
-pdma: dma-controller@d4000000 {
-	      compatible = "marvell,pdma-1.0";
-	      reg = <0xd4000000 0x10000>;
-	      interrupts = <47>;
-	      dma-channels = <16>;
-      };
-
-
-Marvell Two Channel DMA Controller used specifically for audio
-Used platforms: pxa688, pxa910
-
-Required properties:
-- compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ"
-- reg: Should contain DMA registers location and length.
-- interrupts: Either contain all of the per-channel DMA interrupts
-		or one irq for dma device
-
-"marvell,adma-1.0" used on pxa688
-"marvell,pxa910-squ" used on pxa910
-
-Examples:
-
-/* each channel has specific irq */
-adma0: dma-controller@d42a0800 {
-	      compatible = "marvell,adma-1.0";
-	      reg = <0xd42a0800 0x100>;
-	      interrupts = <18 19>;
-	      interrupt-parent = <&intcmux32>;
-      };
-
-/* One irq for all channels */
-squ: dma-controller@d42a0800 {
-	      compatible = "marvell,pxa910-squ";
-	      reg = <0xd42a0800 0x100>;
-	      interrupts = <46>;
-      };