diff options
Diffstat (limited to 'Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt')
-rw-r--r-- | Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt | 46 |
1 files changed, 0 insertions, 46 deletions
diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt deleted file mode 100644 index 349808f4fb8c..000000000000 --- a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt +++ /dev/null @@ -1,46 +0,0 @@ -SiFive FU540 PRCI bindings - -On the FU540 family of SoCs, most system-wide clock and reset integration -is via the PRCI IP block. - -Required properties: -- compatible: Should be "sifive,<chip>-prci". Only one value is - supported: "sifive,fu540-c000-prci" -- reg: Should describe the PRCI's register target physical address region -- clocks: Should point to the hfclk device tree node and the rtcclk - device tree node. The RTC clock here is not a time-of-day clock, - but is instead a high-stability clock source for system timers - and cycle counters. -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock via the clock ID -macros defined in include/dt-bindings/clock/sifive-fu540-prci.h. -These macros begin with PRCI_CLK_. - -The hfclk and rtcclk nodes are required, and represent physical -crystals or resonators located on the PCB. These nodes should be present -underneath /, rather than /soc. - -Examples: - -/* under /, in PCB-specific DT data */ -hfclk: hfclk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <33333333>; - clock-output-names = "hfclk"; -}; -rtcclk: rtcclk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <1000000>; - clock-output-names = "rtcclk"; -}; - -/* under /soc, in SoC-specific DT data */ -prci: clock-controller@10000000 { - compatible = "sifive,fu540-c000-prci"; - reg = <0x0 0x10000000 0x0 0x1000>; - clocks = <&hfclk>, <&rtcclk>; - #clock-cells = <1>; -}; |