diff options
Diffstat (limited to 'Documentation/admin-guide')
| -rw-r--r-- | Documentation/admin-guide/mm/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/admin-guide/mm/ksm.rst | 189 |
2 files changed, 190 insertions, 0 deletions
diff --git a/Documentation/admin-guide/mm/index.rst b/Documentation/admin-guide/mm/index.rst index 6c8b554464bb..ad28644fee35 100644 --- a/Documentation/admin-guide/mm/index.rst +++ b/Documentation/admin-guide/mm/index.rst @@ -23,6 +23,7 @@ the Linux memory management. hugetlbpage idle_page_tracking + ksm pagemap soft-dirty userfaultfd diff --git a/Documentation/admin-guide/mm/ksm.rst b/Documentation/admin-guide/mm/ksm.rst new file mode 100644 index 000000000000..9303786632d1 --- /dev/null +++ b/Documentation/admin-guide/mm/ksm.rst @@ -0,0 +1,189 @@ +.. _admin_guide_ksm: + +======================= +Kernel Samepage Merging +======================= + +Overview +======== + +KSM is a memory-saving de-duplication feature, enabled by CONFIG_KSM=y, +added to the Linux kernel in 2.6.32. See ``mm/ksm.c`` for its implementation, +and http://lwn.net/Articles/306704/ and http://lwn.net/Articles/330589/ + +KSM was originally developed for use with KVM (where it was known as +Kernel Shared Memory), to fit more virtual machines into physical memory, +by sharing the data common between them. But it can be useful to any +application which generates many instances of the same data. + +The KSM daemon ksmd periodically scans those areas of user memory +which have been registered with it, looking for pages of identical +content which can be replaced by a single write-protected page (which +is automatically copied if a process later wants to update its +content). The amount of pages that KSM daemon scans in a single pass +and the time between the passes are configured using :ref:`sysfs +intraface <ksm_sysfs>` + +KSM only merges anonymous (private) pages, never pagecache (file) pages. +KSM's merged pages were originally locked into kernel memory, but can now +be swapped out just like other user pages (but sharing is broken when they +are swapped back in: ksmd must rediscover their identity and merge again). + +Controlling KSM with madvise +============================ + +KSM only operates on those areas of address space which an application +has advised to be likely candidates for merging, by using the madvise(2) +system call:: + + int madvise(addr, length, MADV_MERGEABLE) + +The app may call + +:: + + int madvise(addr, length, MADV_UNMERGEABLE) + +to cancel that advice and restore unshared pages: whereupon KSM +unmerges whatever it merged in that range. Note: this unmerging call +may suddenly require more memory than is available - possibly failing +with EAGAIN, but more probably arousing the Out-Of-Memory killer. + +If KSM is not configured into the running kernel, madvise MADV_MERGEABLE +and MADV_UNMERGEABLE simply fail with EINVAL. If the running kernel was +built with CONFIG_KSM=y, those calls will normally succeed: even if the +the KSM daemon is not currently running, MADV_MERGEABLE still registers +the range for whenever the KSM daemon is started; even if the range +cannot contain any pages which KSM could actually merge; even if +MADV_UNMERGEABLE is applied to a range which was never MADV_MERGEABLE. + +If a region of memory must be split into at least one new MADV_MERGEABLE +or MADV_UNMERGEABLE region, the madvise may return ENOMEM if the process +will exceed ``vm.max_map_count`` (see Documentation/sysctl/vm.txt). + +Like other madvise calls, they are intended for use on mapped areas of +the user address space: they will report ENOMEM if the specified range +includes unmapped gaps (though working on the intervening mapped areas), +and might fail with EAGAIN if not enough memory for internal structures. + +Applications should be considerate in their use of MADV_MERGEABLE, +restricting its use to areas likely to benefit. KSM's scans may use a lot +of processing power: some installations will disable KSM for that reason. + +.. _ksm_sysfs: + +KSM daemon sysfs interface +========================== + +The KSM daemon is controlled by sysfs files in ``/sys/kernel/mm/ksm/``, +readable by all but writable only by root: + +pages_to_scan + how many pages to scan before ksmd goes to sleep + e.g. ``echo 100 > /sys/kernel/mm/ksm/pages_to_scan``. + + Default: 100 (chosen for demonstration purposes) + +sleep_millisecs + how many milliseconds ksmd should sleep before next scan + e.g. ``echo 20 > /sys/kernel/mm/ksm/sleep_millisecs`` + + Default: 20 (chosen for demonstration purposes) + +merge_across_nodes + specifies if pages from different NUMA nodes can be merged. + When set to 0, ksm merges only pages which physically reside + in the memory area of same NUMA node. That brings lower + latency to access of shared pages. Systems with more nodes, at + significant NUMA distances, are likely to benefit from the + lower latency of setting 0. Smaller systems, which need to + minimize memory usage, are likely to benefit from the greater + sharing of setting 1 (default). You may wish to compare how + your system performs under each setting, before deciding on + which to use. ``merge_across_nodes`` setting can be changed only + when there are no ksm shared pages in the system: set run 2 to + unmerge pages first, then to 1 after changing + ``merge_across_nodes``, to remerge according to the new setting. + + Default: 1 (merging across nodes as in earlier releases) + +run + * set to 0 to stop ksmd from running but keep merged pages, + * set to 1 to run ksmd e.g. ``echo 1 > /sys/kernel/mm/ksm/run``, + * set to 2 to stop ksmd and unmerge all pages currently merged, but + leave mergeable areas registered for next run. + + Default: 0 (must be changed to 1 to activate KSM, except if + CONFIG_SYSFS is disabled) + +use_zero_pages + specifies whether empty pages (i.e. allocated pages that only + contain zeroes) should be treated specially. When set to 1, + empty pages are merged with the kernel zero page(s) instead of + with each other as it would happen normally. This can improve + the performance on architectures with coloured zero pages, + depending on the workload. Care should be taken when enabling + this setting, as it can potentially degrade the performance of + KSM for some workloads, for example if the checksums of pages + candidate for merging match the checksum of an empty + page. This setting can be changed at any time, it is only + effective for pages merged after the change. + + Default: 0 (normal KSM behaviour as in earlier releases) + +max_page_sharing + Maximum sharing allowed for each KSM page. This enforces a + deduplication limit to avoid high latency for virtual memory + operations that involve traversal of the virtual mappings that + share the KSM page. The minimum value is 2 as a newly created + KSM page will have at least two sharers. The higher this value + the faster KSM will merge the memory and the higher the + deduplication factor will be, but the slower the worst case + virtual mappings traversal could be for any given KSM + page. Slowing down this traversal means there will be higher + latency for certain virtual memory operations happening during + swapping, compaction, NUMA balancing and page migration, in + turn decreasing responsiveness for the caller of those virtual + memory operations. The scheduler latency of other tasks not + involved with the VM operations doing the virtual mappings + traversal is not affected by this parameter as these + traversals are always schedule friendly themselves. + +stable_node_chains_prune_millisecs + specifies how frequently KSM checks the metadata of the pages + that hit the deduplication limit for stale information. + Smaller milllisecs values will free up the KSM metadata with + lower latency, but they will make ksmd use more CPU during the + scan. It's a noop if not a single KSM page hit the + ``max_page_sharing`` yet. + +The effectiveness of KSM and MADV_MERGEABLE is shown in ``/sys/kernel/mm/ksm/``: + +pages_shared + how many shared pages are being used +pages_sharing + how many more sites are sharing them i.e. how much saved +pages_unshared + how many pages unique but repeatedly checked for merging +pages_volatile + how many pages changing too fast to be placed in a tree +full_scans + how many times all mergeable areas have been scanned +stable_node_chains + the number of KSM pages that hit the ``max_page_sharing`` limit +stable_node_dups + number of duplicated KSM pages + +A high ratio of ``pages_sharing`` to ``pages_shared`` indicates good +sharing, but a high ratio of ``pages_unshared`` to ``pages_sharing`` +indicates wasted effort. ``pages_volatile`` embraces several +different kinds of activity, but a high proportion there would also +indicate poor use of madvise MADV_MERGEABLE. + +The maximum possible ``pages_sharing/pages_shared`` ratio is limited by the +``max_page_sharing`` tunable. To increase the ratio ``max_page_sharing`` must +be increased accordingly. + +-- +Izik Eidus, +Hugh Dickins, 17 Nov 2009 |