diff options
Diffstat (limited to 'Documentation/ABI')
| -rw-r--r-- | Documentation/ABI/testing/configfs-usb-gadget-uac2 | 2 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-thunderbolt | 82 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-usb | 11 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-devices-removable | 18 |
4 files changed, 79 insertions, 34 deletions
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uac2 b/Documentation/ABI/testing/configfs-usb-gadget-uac2 index d4356c8b8cd6..26fb8e9b4e61 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-uac2 +++ b/Documentation/ABI/testing/configfs-usb-gadget-uac2 @@ -8,6 +8,8 @@ Description: c_chmask capture channel mask c_srate capture sampling rate c_ssize capture sample size (bytes) + c_sync capture synchronization type (async/adaptive) + fb_max maximum extra bandwidth in async mode p_chmask playback channel mask p_srate playback sampling rate p_ssize playback sample size (bytes) diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt index c41c68f64693..95c21d6c9a84 100644 --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt @@ -1,4 +1,4 @@ -What: /sys/bus/thunderbolt/devices/.../domainX/boot_acl +What: /sys/bus/thunderbolt/devices/.../domainX/boot_acl Date: Jun 2018 KernelVersion: 4.17 Contact: thunderbolt-software@lists.01.org @@ -21,7 +21,7 @@ Description: Holds a comma separated list of device unique_ids that If a device is authorized automatically during boot its boot attribute is set to 1. -What: /sys/bus/thunderbolt/devices/.../domainX/deauthorization +What: /sys/bus/thunderbolt/devices/.../domainX/deauthorization Date: May 2021 KernelVersion: 5.12 Contact: Mika Westerberg <mika.westerberg@linux.intel.com> @@ -30,7 +30,7 @@ Description: This attribute tells whether the system supports de-authorize PCIe tunnel by writing 0 to authorized attribute under each device. -What: /sys/bus/thunderbolt/devices/.../domainX/iommu_dma_protection +What: /sys/bus/thunderbolt/devices/.../domainX/iommu_dma_protection Date: Mar 2019 KernelVersion: 4.21 Contact: thunderbolt-software@lists.01.org @@ -39,7 +39,7 @@ Description: This attribute tells whether the system uses IOMMU it is not (DMA protection is solely based on Thunderbolt security levels). -What: /sys/bus/thunderbolt/devices/.../domainX/security +What: /sys/bus/thunderbolt/devices/.../domainX/security Date: Sep 2017 KernelVersion: 4.13 Contact: thunderbolt-software@lists.01.org @@ -61,7 +61,7 @@ Description: This attribute holds current Thunderbolt security level the BIOS. ======= ================================================== -What: /sys/bus/thunderbolt/devices/.../authorized +What: /sys/bus/thunderbolt/devices/.../authorized Date: Sep 2017 KernelVersion: 4.13 Contact: thunderbolt-software@lists.01.org @@ -95,14 +95,14 @@ Description: This attribute is used to authorize Thunderbolt devices EKEYREJECTED if the challenge response did not match. == ======================================================== -What: /sys/bus/thunderbolt/devices/.../boot +What: /sys/bus/thunderbolt/devices/.../boot Date: Jun 2018 KernelVersion: 4.17 Contact: thunderbolt-software@lists.01.org Description: This attribute contains 1 if Thunderbolt device was already authorized on boot and 0 otherwise. -What: /sys/bus/thunderbolt/devices/.../generation +What: /sys/bus/thunderbolt/devices/.../generation Date: Jan 2020 KernelVersion: 5.5 Contact: Christian Kellner <christian@kellner.me> @@ -110,7 +110,7 @@ Description: This attribute contains the generation of the Thunderbolt controller associated with the device. It will contain 4 for USB4. -What: /sys/bus/thunderbolt/devices/.../key +What: /sys/bus/thunderbolt/devices/.../key Date: Sep 2017 KernelVersion: 4.13 Contact: thunderbolt-software@lists.01.org @@ -213,12 +213,15 @@ Description: When new NVM image is written to the non-active NVM restarted with the new NVM firmware. If the image verification fails an error code is returned instead. - This file will accept writing values "1" or "2" + This file will accept writing values "1", "2" or "3". - Writing "1" will flush the image to the storage area and authenticate the image in one action. - Writing "2" will run some basic validation on the image and flush it to the storage area. + - Writing "3" will authenticate the image that is + currently written in the storage area. This is only + supported with USB4 devices and retimers. When read holds status of the last authentication operation if an error occurred during the process. This @@ -226,6 +229,20 @@ Description: When new NVM image is written to the non-active NVM based mailbox before the device is power cycled. Writing 0 here clears the status. +What: /sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect +Date: Oct 2020 +KernelVersion: v5.9 +Contact: Mario Limonciello <mario.limonciello@dell.com> +Description: For supported devices, automatically authenticate the new Thunderbolt + image when the device is disconnected from the host system. + + This file will accept writing values "1" or "2" + + - Writing "1" will flush the image to the storage + area and prepare the device for authentication on disconnect. + - Writing "2" will run some basic validation on the image + and flush it to the storage area. + What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/key Date: Jan 2018 KernelVersion: 4.15 @@ -276,6 +293,39 @@ Contact: thunderbolt-software@lists.01.org Description: This contains XDomain service specific settings as bitmask. Format: %x +What: /sys/bus/thunderbolt/devices/usb4_portX/link +Date: Sep 2021 +KernelVersion: v5.14 +Contact: Mika Westerberg <mika.westerberg@linux.intel.com> +Description: Returns the current link mode. Possible values are + "usb4", "tbt" and "none". + +What: /sys/bus/thunderbolt/devices/usb4_portX/offline +Date: Sep 2021 +KernelVersion: v5.14 +Contact: Rajmohan Mani <rajmohan.mani@intel.com> +Description: Writing 1 to this attribute puts the USB4 port into + offline mode. Only allowed when there is nothing + connected to the port (link attribute returns "none"). + Once the port is in offline mode it does not receive any + hotplug events. This is used to update NVM firmware of + on-board retimers. Writing 0 puts the port back to + online mode. + + This attribute is only visible if the platform supports + powering on retimers when there is no cable connected. + +What: /sys/bus/thunderbolt/devices/usb4_portX/rescan +Date: Sep 2021 +KernelVersion: v5.14 +Contact: Rajmohan Mani <rajmohan.mani@intel.com> +Description: When the USB4 port is in offline mode writing 1 to this + attribute forces rescan of the sideband for on-board + retimers. Each retimer appear under the USB4 port as if + the USB4 link was up. These retimers act in the same way + as if the cable was connected so upgrading their NVM + firmware can be done the usual way. + What: /sys/bus/thunderbolt/devices/<device>:<port>.<index>/device Date: Oct 2020 KernelVersion: v5.9 @@ -308,17 +358,3 @@ Date: Oct 2020 KernelVersion: v5.9 Contact: Mika Westerberg <mika.westerberg@linux.intel.com> Description: Retimer vendor identifier read from the hardware. - -What: /sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect -Date: Oct 2020 -KernelVersion: v5.9 -Contact: Mario Limonciello <mario.limonciello@dell.com> -Description: For supported devices, automatically authenticate the new Thunderbolt - image when the device is disconnected from the host system. - - This file will accept writing values "1" or "2" - - - Writing "1" will flush the image to the storage - area and prepare the device for authentication on disconnect. - - Writing "2" will run some basic validation on the image - and flush it to the storage area. diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index bf2c1968525f..73eb23bc1f34 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -154,17 +154,6 @@ Description: files hold a string value (enable or disable) indicating whether or not USB3 hardware LPM U1 or U2 is enabled for the device. -What: /sys/bus/usb/devices/.../removable -Date: February 2012 -Contact: Matthew Garrett <mjg@redhat.com> -Description: - Some information about whether a given USB device is - physically fixed to the platform can be inferred from a - combination of hub descriptor bits and platform-specific data - such as ACPI. This file will read either "removable" or - "fixed" if the information is available, and "unknown" - otherwise. - What: /sys/bus/usb/devices/.../ltm_capable Date: July 2012 Contact: Sarah Sharp <sarah.a.sharp@linux.intel.com> diff --git a/Documentation/ABI/testing/sysfs-devices-removable b/Documentation/ABI/testing/sysfs-devices-removable new file mode 100644 index 000000000000..bda6c320c8d3 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-removable @@ -0,0 +1,18 @@ +What: /sys/devices/.../removable +Date: May 2021 +Contact: Rajat Jain <rajatxjain@gmail.com> +Description: + Information about whether a given device can be removed from the + platform by the user. This is determined by its subsystem in a + bus / platform-specific way. This attribute is only present for + devices that can support determining such information: + + "removable": device can be removed from the platform by the user + "fixed": device is fixed to the platform / cannot be removed + by the user. + "unknown": The information is unavailable / cannot be deduced. + + Currently this is only supported by USB (which infers the + information from a combination of hub descriptor bits and + platform-specific data such as ACPI) and PCI (which gets this + from ACPI / device tree). |