diff options
| -rw-r--r-- | Documentation/hwmon/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/hwmon/nzxt-kraken3.rst | 74 | ||||
| -rw-r--r-- | MAINTAINERS | 8 | ||||
| -rw-r--r-- | drivers/hwmon/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/nzxt-kraken3.c | 1008 |
6 files changed, 1102 insertions, 0 deletions
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 0d12254c0f9e..6f8a4a7524e8 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -174,6 +174,7 @@ Hardware Monitoring Kernel Drivers nsa320 ntc_thermistor nzxt-kraken2 + nzxt-kraken3 nzxt-smart2 occ oxp-sensors diff --git a/Documentation/hwmon/nzxt-kraken3.rst b/Documentation/hwmon/nzxt-kraken3.rst new file mode 100644 index 000000000000..90fd9dec15ff --- /dev/null +++ b/Documentation/hwmon/nzxt-kraken3.rst @@ -0,0 +1,74 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver nzxt-kraken3 +========================== + +Supported devices: + +* NZXT Kraken X53 +* NZXT Kraken X63 +* NZXT Kraken X73 +* NZXT Kraken Z53 +* NZXT Kraken Z63 +* NZXT Kraken Z73 + +Author: Jonas Malaco, Aleksa Savic + +Description +----------- + +This driver enables hardware monitoring support for NZXT Kraken X53/X63/X73 and +Z53/Z63/Z73 all-in-one CPU liquid coolers. All models expose liquid temperature +and pump speed (in RPM), as well as PWM control (either as a fixed value +or through a temp-PWM curve). The Z-series models additionally expose the speed +and duty of an optionally connected fan, with the same PWM control capabilities. + +Pump and fan duty control mode can be set through pwm[1-2]_enable, where 1 is +for the manual control mode and 2 is for the liquid temp to PWM curve mode. +Writing a 0 disables control of the channel through the driver after setting its +duty to 100%. + +The temperature of the curves relates to the fixed [20-59] range, correlating to +the detected liquid temperature. Only PWM values (ranging from 0-255) can be set. +If in curve mode, setting point values should be done in moderation - the devices +require complete curves to be sent for each change; they can lock up or discard +the changes if they are too numerous at once. Suggestion is to set them while +in an another mode, and then apply them by switching to curve. + +The devices can report if they are faulty. The driver supports that situation +and will issue a warning. This can also happen when the USB cable is connected, +but SATA power is not. + +The addressable RGB LEDs and LCD screen (only on Z-series models) are not +supported in this driver, but can be controlled through existing userspace tools, +such as `liquidctl`_. + +.. _liquidctl: https://github.com/liquidctl/liquidctl + +Usage Notes +----------- + +As these are USB HIDs, the driver can be loaded automatically by the kernel and +supports hot swapping. + +Possible pwm_enable values are: + +====== ========================================================================== +0 Set fan to 100% +1 Direct PWM mode (applies value in corresponding PWM entry) +2 Curve control mode (applies the temp-PWM duty curve based on coolant temp) +====== ========================================================================== + +Sysfs entries +------------- + +============================== ================================================================ +fan1_input Pump speed (in rpm) +fan2_input Fan speed (in rpm) +temp1_input Coolant temperature (in millidegrees Celsius) +pwm1 Pump duty (value between 0-255) +pwm1_enable Pump duty control mode (0: disabled, 1: manual, 2: curve) +pwm2 Fan duty (value between 0-255) +pwm2_enable Fan duty control mode (0: disabled, 1: manual, 2: curve) +temp[1-2]_auto_point[1-40]_pwm Temp-PWM duty curves (for pump and fan), related to coolant temp +============================== ================================================================ diff --git a/MAINTAINERS b/MAINTAINERS index b00657d2536f..b9906f88c1b7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15840,6 +15840,14 @@ S: Maintained F: Documentation/hwmon/nzxt-kraken2.rst F: drivers/hwmon/nzxt-kraken2.c +NZXT-KRAKEN3 HARDWARE MONITORING DRIVER +M: Jonas Malaco <jonas@protocubo.io> +M: Aleksa Savic <savicaleksa83@gmail.com> +L: linux-hwmon@vger.kernel.org +S: Maintained +F: Documentation/hwmon/nzxt-kraken3.rst +F: drivers/hwmon/nzxt-kraken3.c + NZXT-SMART2 HARDWARE MONITORING DRIVER M: Aleksandr Mezin <mezin.alexander@gmail.com> L: linux-hwmon@vger.kernel.org diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 5c85c976d795..3904bb297d61 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1695,6 +1695,16 @@ config SENSORS_NZXT_KRAKEN2 This driver can also be built as a module. If so, the module will be called nzxt-kraken2. +config SENSORS_NZXT_KRAKEN3 + tristate "NZXT Kraken X53/X63/X73, Z53/Z63/Z73 coolers" + depends on USB_HID + help + If you say yes here you get support for hardware monitoring for the + NZXT Kraken X53/X63/X73, Z53/Z63/Z73 all-in-one CPU liquid coolers. + + This driver can also be built as a module. If so, the module + will be called nzxt-kraken3. + config SENSORS_NZXT_SMART2 tristate "NZXT RGB & Fan Controller/Smart Device v2" depends on USB_HID diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 5da0c4ce881b..76e6dfef9f24 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -175,6 +175,7 @@ obj-$(CONFIG_SENSORS_NPCM7XX) += npcm750-pwm-fan.o obj-$(CONFIG_SENSORS_NSA320) += nsa320-hwmon.o obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o obj-$(CONFIG_SENSORS_NZXT_KRAKEN2) += nzxt-kraken2.o +obj-$(CONFIG_SENSORS_NZXT_KRAKEN3) += nzxt-kraken3.o obj-$(CONFIG_SENSORS_NZXT_SMART2) += nzxt-smart2.o obj-$(CONFIG_SENSORS_OXP) += oxp-sensors.o obj-$(CONFIG_SENSORS_PC87360) += pc87360.o diff --git a/drivers/hwmon/nzxt-kraken3.c b/drivers/hwmon/nzxt-kraken3.c new file mode 100644 index 000000000000..5806a3f32bcb --- /dev/null +++ b/drivers/hwmon/nzxt-kraken3.c @@ -0,0 +1,1008 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * hwmon driver for NZXT Kraken X53/X63/X73 and Z53/Z63/Z73 all in one coolers. + * X53 and Z53 in code refer to all models in their respective series (shortened + * for brevity). + * + * Copyright 2021 Jonas Malaco <jonas@protocubo.io> + * Copyright 2022 Aleksa Savic <savicaleksa83@gmail.com> + */ + +#include <linux/debugfs.h> +#include <linux/hid.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> +#include <linux/wait.h> +#include <asm/unaligned.h> + +#define USB_VENDOR_ID_NZXT 0x1e71 +#define USB_PRODUCT_ID_X53 0x2007 +#define USB_PRODUCT_ID_X53_SECOND 0x2014 +#define USB_PRODUCT_ID_Z53 0x3008 + +enum kinds { X53, Z53 } __packed; +enum pwm_enable { off, manual, curve } __packed; + +static const char *const kraken3_device_names[] = { + [X53] = "x53", + [Z53] = "z53", +}; + +#define DRIVER_NAME "nzxt_kraken3" +#define STATUS_REPORT_ID 0x75 +#define FIRMWARE_REPORT_ID 0x11 +#define STATUS_VALIDITY 2000 /* In ms, equivalent to period of four status reports */ +#define CUSTOM_CURVE_POINTS 40 /* For temps from 20C to 59C (critical temp) */ +#define PUMP_DUTY_MIN 20 /* In percent */ + +/* Sensor report offsets for Kraken X53 and Z53 */ +#define TEMP_SENSOR_START_OFFSET 15 +#define TEMP_SENSOR_END_OFFSET 16 +#define PUMP_SPEED_OFFSET 17 +#define PUMP_DUTY_OFFSET 19 + +/* Firmware version report offset for Kraken X53 and Z53 */ +#define FIRMWARE_VERSION_OFFSET 17 + +/* Sensor report offsets for Kraken Z53 */ +#define Z53_FAN_SPEED_OFFSET 23 +#define Z53_FAN_DUTY_OFFSET 25 + +/* Report offsets for control commands for Kraken X53 and Z53 */ +#define SET_DUTY_ID_OFFSET 1 + +/* Control commands and their lengths for Kraken X53 and Z53 */ + +/* Last byte sets the report interval at 0.5s */ +static const u8 set_interval_cmd[] = { 0x70, 0x02, 0x01, 0xB8, 1 }; +static const u8 finish_init_cmd[] = { 0x70, 0x01 }; +static const u8 __maybe_unused get_fw_version_cmd[] = { 0x10, 0x01 }; +static const u8 set_pump_duty_cmd_header[] = { 0x72, 0x00, 0x00, 0x00 }; +static const u8 z53_get_status_cmd[] = { 0x74, 0x01 }; + +#define SET_INTERVAL_CMD_LENGTH 5 +#define FINISH_INIT_CMD_LENGTH 2 +#define GET_FW_VERSION_CMD_LENGTH 2 +#define MAX_REPORT_LENGTH 64 +#define MIN_REPORT_LENGTH 20 +#define SET_CURVE_DUTY_CMD_HEADER_LENGTH 4 +/* 4 byte header and 40 duty offsets */ +#define SET_CURVE_DUTY_CMD_LENGTH (4 + 40) +#define Z53_GET_STATUS_CMD_LENGTH 2 + +static const char *const kraken3_temp_label[] = { + "Coolant temp", +}; + +static const char *const kraken3_fan_label[] = { + "Pump speed", + "Fan speed" +}; + +struct kraken3_channel_info { + enum pwm_enable mode; + + /* Both values are PWM */ + u16 reported_duty; + u16 fixed_duty; /* Manually set fixed duty */ + + u8 pwm_points[CUSTOM_CURVE_POINTS]; +}; + +struct kraken3_data { + struct hid_device *hdev; + struct device *hwmon_dev; + struct dentry *debugfs; + struct mutex buffer_lock; /* For locking access to buffer */ + struct mutex z53_status_request_lock; + struct completion fw_version_processed; + /* + * For X53 devices, tracks whether an initial (one) sensor report was received to + * make fancontrol not bail outright. For Z53 devices, whether a status report + * was processed after requesting one. + */ + struct completion status_report_processed; + /* For locking the above completion */ + spinlock_t status_completion_lock; + + u8 *buffer; + struct kraken3_channel_info channel_info[2]; /* Pump and fan */ + bool is_device_faulty; + + /* Sensor values */ + s32 temp_input[1]; + u16 fan_input[2]; + + enum kinds kind; + u8 firmware_version[3]; + + unsigned long updated; /* jiffies */ +}; + +static umode_t kraken3_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, + int channel) +{ + const struct kraken3_data *priv = data; + + switch (type) { + case hwmon_temp: + if (channel < 1) + return 0444; + break; + case hwmon_fan: + switch (priv->kind) { + case X53: + /* Just the pump */ + if (channel < 1) + return 0444; + break; + case Z53: + /* Pump and fan */ + if (channel < 2) + return 0444; + break; + default: + break; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_enable: + case hwmon_pwm_input: + switch (priv->kind) { + case X53: + /* Just the pump */ + if (channel < 1) + return 0644; + break; + case Z53: + /* Pump and fan */ + if (channel < 2) + return 0644; + break; + default: + break; + } + break; + default: + break; + } + break; + default: + break; + } + + return 0; +} + +/* + * Writes the command to the device with the rest of the report (up to 64 bytes) filled + * with zeroes. + */ +static int kraken3_write_expanded(struct kraken3_data *priv, const u8 *cmd, int cmd_length) +{ + int ret; + + mutex_lock(&priv->buffer_lock); + + memcpy_and_pad(priv->buffer, MAX_REPORT_LENGTH, cmd, cmd_length, 0x00); + ret = hid_hw_output_report(priv->hdev, priv->buffer, MAX_REPORT_LENGTH); + + mutex_unlock(&priv->buffer_lock); + return ret; +} + +static int kraken3_percent_to_pwm(long val) +{ + return DIV_ROUND_CLOSEST(val * 255, 100); +} + +static int kraken3_pwm_to_percent(long val, int channel) +{ + int percent_value; + + if (val < 0 || val > 255) + return -EINVAL; + + percent_value = DIV_ROUND_CLOSEST(val * 100, 255); + + /* Bring up pump duty to min value if needed */ + if (channel == 0 && percent_value < PUMP_DUTY_MIN) + percent_value = PUMP_DUTY_MIN; + + return percent_value; +} + +static int kraken3_read_x53(struct kraken3_data *priv) +{ + int ret; + + if (completion_done(&priv->status_report_processed)) + /* + * We're here because data is stale. This means that sensor reports haven't + * been received for some time in kraken3_raw_event(). On X-series sensor data + * can't be manually requested, so return an error. + */ + return -ENODATA; + + /* + * Data needs to be read, but a sensor report wasn't yet received. It's usually + * fancontrol that requests data this early and it exits if it reads an error code. + * So, wait for the first report to be parsed (but up to STATUS_VALIDITY). + * This does not concern the Z series devices, because they send a sensor report + * only when requested. + */ + ret = wait_for_completion_interruptible_timeout(&priv->status_report_processed, + msecs_to_jiffies(STATUS_VALIDITY)); + if (ret == 0) + return -ETIMEDOUT; + else if (ret < 0) + return ret; + + /* The first sensor report was parsed on time and reading can continue */ + return 0; +} + +static int kraken3_read_z53(struct kraken3_data *priv) +{ + int ret = mutex_lock_interruptible(&priv->z53_status_request_lock); + + if (ret < 0) + return ret; + + if (!time_after(jiffies, priv->updated + msecs_to_jiffies(STATUS_VALIDITY))) { + /* Data is up to date */ + goto unlock_and_return; + } + + /* + * Disable interrupts for a moment to safely reinit the completion, + * as hidraw calls could have allowed one or more readers to complete. + */ + spin_lock_bh(&priv->status_completion_lock); + reinit_completion(&priv->status_report_processed); + spin_unlock_bh(&priv->status_completion_lock); + + /* Send command for getting status */ + ret = kraken3_write_expanded(priv, z53_get_status_cmd, Z53_GET_STATUS_CMD_LENGTH); + if (ret < 0) + goto unlock_and_return; + + /* Wait for completion from kraken3_raw_event() */ + ret = wait_for_completion_interruptible_timeout(&priv->status_report_processed, + msecs_to_jiffies(STATUS_VALIDITY)); + if (ret == 0) + ret = -ETIMEDOUT; + +unlock_and_return: + mutex_unlock(&priv->z53_status_request_lock); + if (ret < 0) + return ret; + + return 0; +} + +static int kraken3_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, + long *val) +{ + struct kraken3_data *priv = dev_get_drvdata(dev); + int ret; + + if (time_after(jiffies, priv->updated + msecs_to_jiffies(STATUS_VALIDITY))) { + if (priv->kind == X53) + ret = kraken3_read_x53(priv); + else + ret = kraken3_read_z53(priv); + + if (ret < 0) + return ret; + + if (priv->is_device_faulty) + return -ENODATA; + } + + switch (type) { + case hwmon_temp: + *val = priv->temp_input[channel]; + break; + case hwmon_fan: + *val = priv->fan_input[channel]; + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_enable: + *val = priv->channel_info[channel].mode; + break; + case hwmon_pwm_input: + *val = priv->channel_info[channel].reported_duty; + break; + default: + return -EOPNOTSUPP; + } + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int kraken3_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr, + int channel, const char **str) +{ + switch (type) { + case hwmon_temp: + *str = kraken3_temp_label[channel]; + break; + case hwmon_fan: + *str = kraken3_fan_label[channel]; + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +/* Writes custom curve to device */ +static int kraken3_write_curve(struct kraken3_data *priv, u8 *curve_array, int channel) +{ + u8 fixed_duty_cmd[SET_CURVE_DUTY_CMD_LENGTH]; + int ret; + + /* Copy command header */ + memcpy(fixed_duty_cmd, set_pump_duty_cmd_header, SET_CURVE_DUTY_CMD_HEADER_LENGTH); + + /* Set the correct ID for writing pump/fan duty (0x01 or 0x02, respectively) */ + fixed_duty_cmd[SET_DUTY_ID_OFFSET] = channel + 1; + + /* Copy curve to command */ + memcpy(fixed_duty_cmd + SET_CURVE_DUTY_CMD_HEADER_LENGTH, curve_array, CUSTOM_CURVE_POINTS); + + ret = kraken3_write_expanded(priv, fixed_duty_cmd, SET_CURVE_DUTY_CMD_LENGTH); + return ret; +} + +static int kraken3_write_fixed_duty(struct kraken3_data *priv, long val, int channel) +{ + u8 fixed_curve_points[CUSTOM_CURVE_POINTS]; + int ret, percent_val, i; + + percent_val = kraken3_pwm_to_percent(val, channel); + if (percent_val < 0) + return percent_val; + + /* + * The devices can only control the duty through a curve. + * Since we're setting a fixed duty here, fill the whole curve + * (ranging from 20C to 59C) with the same duty, except for + * the last point, the critical temperature, where it's maxed + * out for safety. + */ + + /* Fill the custom curve with the fixed value we're setting */ + for (i = 0; i < CUSTOM_CURVE_POINTS - 1; i++) + fixed_curve_points[i] = percent_val; + + /* Force duty to 100% at critical temp */ + fixed_curve_points[CUSTOM_CURVE_POINTS - 1] = 100; + + /* Write the fixed duty curve to the device */ + ret = kraken3_write_curve(priv, fixed_curve_points, channel); + return ret; +} + +static int kraken3_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, + long val) +{ + struct kraken3_data *priv = dev_get_drvdata(dev); + int ret; + + switch (type) { + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + /* Remember the last set fixed duty for channel */ + priv->channel_info[channel].fixed_duty = val; + + if (priv->channel_info[channel].mode == manual) { + ret = kraken3_write_fixed_duty(priv, val, channel); + if (ret < 0) + return ret; + + /* + * Lock onto this value and report it until next interrupt status + * report is received, so userspace tools can continue to work. + */ + priv->channel_info[channel].reported_duty = val; + } + break; + case hwmon_pwm_enable: + if (val < 0 || val > 2) + return -EINVAL; + + switch (val) { + case 0: + /* Set channel to 100%, direct duty value */ + ret = kraken3_write_fixed_duty(priv, 255, channel); + if (ret < 0) + return ret; + + /* We don't control anything anymore */ + priv->channel_info[channel].mode = off; + break; + case 1: + /* Apply the last known direct duty value */ + ret = + kraken3_write_fixed_duty(priv, + priv->channel_info[channel].fixed_duty, + channel); + if (ret < 0) + return ret; + + priv->channel_info[channel].mode = manual; + break; + case 2: + /* Apply the curve and note as enabled */ + ret = + kraken3_write_curve(priv, + priv->channel_info[channel].pwm_points, + channel); + if (ret < 0) + return ret; + + priv->channel_info[channel].mode = curve; + break; + default: + break; + } + break; + default: + return -EOPNOTSUPP; + } + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static ssize_t kraken3_fan_curve_pwm_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute_2 *dev_attr = to_sensor_dev_attr_2(attr); + struct kraken3_data *priv = dev_get_drvdata(dev); + long val; + int ret; + + if (kstrtol(buf, 10, &val) < 0) + return -EINVAL; + + val = kraken3_pwm_to_percent(val, dev_attr->nr); + if (val < 0) + return val; + + priv->channel_info[dev_attr->nr].pwm_points[dev_attr->index] = val; + + if (priv->channel_info[dev_attr->nr].mode == curve) { + /* Apply the curve */ + ret = + kraken3_write_curve(priv, + priv->channel_info[dev_attr->nr].pwm_points, dev_attr->nr); + if (ret < 0) + return ret; + } + + return count; +} + +static umode_t kraken3_curve_props_are_visible(struct kobject *kobj, struct attribute *attr, + int index) +{ + struct device *dev = kobj_to_dev(kobj); + struct kraken3_data *priv = dev_get_drvdata(dev); + + /* Only Z53 has the fan curve */ + if (index >= CUSTOM_CURVE_POINTS && priv->kind != Z53) + return 0; + + return attr->mode; +} + +/* Custom pump curve from 20C to 59C (critical temp) */ +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point1_pwm, kraken3_fan_curve_pwm, 0, 0); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point2_pwm, kraken3_fan_curve_pwm, 0, 1); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point3_pwm, kraken3_fan_curve_pwm, 0, 2); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point4_pwm, kraken3_fan_curve_pwm, 0, 3); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point5_pwm, kraken3_fan_curve_pwm, 0, 4); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point6_pwm, kraken3_fan_curve_pwm, 0, 5); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point7_pwm, kraken3_fan_curve_pwm, 0, 6); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point8_pwm, kraken3_fan_curve_pwm, 0, 7); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point9_pwm, kraken3_fan_curve_pwm, 0, 8); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point10_pwm, kraken3_fan_curve_pwm, 0, 9); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point11_pwm, kraken3_fan_curve_pwm, 0, 10); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point12_pwm, kraken3_fan_curve_pwm, 0, 11); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point13_pwm, kraken3_fan_curve_pwm, 0, 12); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point14_pwm, kraken3_fan_curve_pwm, 0, 13); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point15_pwm, kraken3_fan_curve_pwm, 0, 14); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point16_pwm, kraken3_fan_curve_pwm, 0, 15); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point17_pwm, kraken3_fan_curve_pwm, 0, 16); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point18_pwm, kraken3_fan_curve_pwm, 0, 17); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point19_pwm, kraken3_fan_curve_pwm, 0, 18); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point20_pwm, kraken3_fan_curve_pwm, 0, 19); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point21_pwm, kraken3_fan_curve_pwm, 0, 20); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point22_pwm, kraken3_fan_curve_pwm, 0, 21); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point23_pwm, kraken3_fan_curve_pwm, 0, 22); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point24_pwm, kraken3_fan_curve_pwm, 0, 23); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point25_pwm, kraken3_fan_curve_pwm, 0, 24); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point26_pwm, kraken3_fan_curve_pwm, 0, 25); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point27_pwm, kraken3_fan_curve_pwm, 0, 26); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point28_pwm, kraken3_fan_curve_pwm, 0, 27); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point29_pwm, kraken3_fan_curve_pwm, 0, 28); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point30_pwm, kraken3_fan_curve_pwm, 0, 29); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point31_pwm, kraken3_fan_curve_pwm, 0, 30); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point32_pwm, kraken3_fan_curve_pwm, 0, 31); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point33_pwm, kraken3_fan_curve_pwm, 0, 32); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point34_pwm, kraken3_fan_curve_pwm, 0, 33); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point35_pwm, kraken3_fan_curve_pwm, 0, 34); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point36_pwm, kraken3_fan_curve_pwm, 0, 35); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point37_pwm, kraken3_fan_curve_pwm, 0, 36); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point38_pwm, kraken3_fan_curve_pwm, 0, 37); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point39_pwm, kraken3_fan_curve_pwm, 0, 38); +static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point40_pwm, kraken3_fan_curve_pwm, 0, 39); + +/* Custom fan curve from 20C to 59C (critical temp) */ +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point1_pwm, kraken3_fan_curve_pwm, 1, 0); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point2_pwm, kraken3_fan_curve_pwm, 1, 1); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point3_pwm, kraken3_fan_curve_pwm, 1, 2); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point4_pwm, kraken3_fan_curve_pwm, 1, 3); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point5_pwm, kraken3_fan_curve_pwm, 1, 4); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point6_pwm, kraken3_fan_curve_pwm, 1, 5); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point7_pwm, kraken3_fan_curve_pwm, 1, 6); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point8_pwm, kraken3_fan_curve_pwm, 1, 7); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point9_pwm, kraken3_fan_curve_pwm, 1, 8); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point10_pwm, kraken3_fan_curve_pwm, 1, 9); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point11_pwm, kraken3_fan_curve_pwm, 1, 10); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point12_pwm, kraken3_fan_curve_pwm, 1, 11); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point13_pwm, kraken3_fan_curve_pwm, 1, 12); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point14_pwm, kraken3_fan_curve_pwm, 1, 13); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point15_pwm, kraken3_fan_curve_pwm, 1, 14); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point16_pwm, kraken3_fan_curve_pwm, 1, 15); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point17_pwm, kraken3_fan_curve_pwm, 1, 16); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point18_pwm, kraken3_fan_curve_pwm, 1, 17); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point19_pwm, kraken3_fan_curve_pwm, 1, 18); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point20_pwm, kraken3_fan_curve_pwm, 1, 19); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point21_pwm, kraken3_fan_curve_pwm, 1, 20); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point22_pwm, kraken3_fan_curve_pwm, 1, 21); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point23_pwm, kraken3_fan_curve_pwm, 1, 22); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point24_pwm, kraken3_fan_curve_pwm, 1, 23); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point25_pwm, kraken3_fan_curve_pwm, 1, 24); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point26_pwm, kraken3_fan_curve_pwm, 1, 25); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point27_pwm, kraken3_fan_curve_pwm, 1, 26); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point28_pwm, kraken3_fan_curve_pwm, 1, 27); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point29_pwm, kraken3_fan_curve_pwm, 1, 28); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point30_pwm, kraken3_fan_curve_pwm, 1, 29); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point31_pwm, kraken3_fan_curve_pwm, 1, 30); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point32_pwm, kraken3_fan_curve_pwm, 1, 31); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point33_pwm, kraken3_fan_curve_pwm, 1, 32); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point34_pwm, kraken3_fan_curve_pwm, 1, 33); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point35_pwm, kraken3_fan_curve_pwm, 1, 34); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point36_pwm, kraken3_fan_curve_pwm, 1, 35); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point37_pwm, kraken3_fan_curve_pwm, 1, 36); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point38_pwm, kraken3_fan_curve_pwm, 1, 37); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point39_pwm, kraken3_fan_curve_pwm, 1, 38); +static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point40_pwm, kraken3_fan_curve_pwm, 1, 39); + +static struct attribute *kraken3_curve_attrs[] = { + /* Pump control curve */ + &sensor_dev_attr_temp1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point3_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point4_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point5_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point6_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point7_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point8_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point9_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point10_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point11_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point12_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point13_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point14_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point15_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point16_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point17_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point18_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point19_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point20_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point21_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point22_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point23_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point24_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point25_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point26_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point27_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point28_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point29_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point30_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point31_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point32_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point33_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point34_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point35_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point36_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point37_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point38_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point39_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point40_pwm.dev_attr.attr, + /* Fan control curve (Z53 only) */ + &sensor_dev_attr_temp2_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point3_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point4_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point5_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point6_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point7_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point8_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point9_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point10_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point11_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point12_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point13_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point14_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point15_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point16_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point17_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point18_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point19_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point20_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point21_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point22_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point23_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point24_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point25_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point26_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point27_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point28_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point29_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point30_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point31_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point32_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point33_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point34_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point35_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point36_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point37_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point38_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point39_pwm.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point40_pwm.dev_attr.attr, + NULL +}; + +static const struct attribute_group kraken3_curves_group = { + .attrs = kraken3_curve_attrs, + .is_visible = kraken3_curve_props_are_visible +}; + +static const struct attribute_group *kraken3_groups[] = { + &kraken3_curves_group, + NULL +}; + +static const struct hwmon_ops kraken3_hwmon_ops = { + .is_visible = kraken3_is_visible, + .read = kraken3_read, + .read_string = kraken3_read_string, + .write = kraken3_write +}; + +static const struct hwmon_channel_info *kraken3_info[] = { + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_LABEL), + HWMON_CHANNEL_INFO(fan, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL), + HWMON_CHANNEL_INFO(pwm, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE), + NULL +}; + +static const struct hwmon_chip_info kraken3_chip_info = { + .ops = &kraken3_hwmon_ops, + .info = kraken3_info, +}; + +static int kraken3_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size) +{ + struct kraken3_data *priv = hid_get_drvdata(hdev); + int i; + + if (size < MIN_REPORT_LENGTH) + return 0; + + if (report->id == FIRMWARE_REPORT_ID) { + /* Read firmware version */ + for (i = 0; i < 3; i++) + priv->firmware_version[i] = data[FIRMWARE_VERSION_OFFSET + i]; + + if (!completion_done(&priv->fw_version_processed)) + complete_all(&priv->fw_version_processed); + + return 0; + } + + if (report->id != STATUS_REPORT_ID) + return 0; + + if (data[TEMP_SENSOR_START_OFFSET] == 0xff && data[TEMP_SENSOR_END_OFFSET] == 0xff) { + hid_err_once(hdev, + "firmware or device is possibly damaged (is SATA power connected?), not parsing reports\n"); + + /* + * Mark first X-series device report as received, + * as well as all for Z-series, if faulty. + */ + spin_lock(&priv->status_completion_lock); + if (priv->kind != X53 || !completion_done(&priv->status_report_processed)) { + priv->is_device_faulty = true; + complete_all(&priv->status_report_processed); + } + spin_unlock(&priv->status_completion_lock); + + return 0; + } + + /* Received normal data */ + priv->is_device_faulty = false; + + /* Temperature and fan sensor readings */ + priv->temp_input[0] = + data[TEMP_SENSOR_START_OFFSET] * 1000 + data[TEMP_SENSOR_END_OFFSET] * 100; + + priv->fan_input[0] = get_unaligned_le16(data + PUMP_SPEED_OFFSET); + priv->channel_info[0].reported_duty = kraken3_percent_to_pwm(data[PUMP_DUTY_OFFSET]); + + spin_lock(&priv->status_completion_lock); + if (priv->kind == X53 && !completion_done(&priv->status_report_processed)) { + /* Mark first X-series device report as received */ + complete_all(&priv->status_report_processed); + } else if (priv->kind == Z53) { + /* Additional readings for Z53 */ + priv->fan_input[1] = get_unaligned_le16(data + Z53_FAN_SPEED_OFFSET); + priv->channel_info[1].reported_duty = + kraken3_percent_to_pwm(data[Z53_FAN_DUTY_OFFSET]); + + if (!completion_done(&priv->status_report_processed)) + complete_all(&priv->status_report_processed); + } + spin_unlock(&priv->status_completion_lock); + + priv->updated = jiffies; + + return 0; +} + +static int kraken3_init_device(struct hid_device *hdev) +{ + struct kraken3_data *priv = hid_get_drvdata(hdev); + int ret; + + /* Set the polling interval */ + ret = kraken3_write_expanded(priv, set_interval_cmd, SET_INTERVAL_CMD_LENGTH); + if (ret < 0) + return ret; + + /* Finalize the init process */ + ret = kraken3_write_expanded(priv, finish_init_cmd, FINISH_INIT_CMD_LENGTH); + if (ret < 0) + return ret; + + return 0; +} + +static int kraken3_get_fw_ver(struct hid_device *hdev) +{ + struct kraken3_data *priv = hid_get_drvdata(hdev); + int ret; + + ret = kraken3_write_expanded(priv, get_fw_version_cmd, GET_FW_VERSION_CMD_LENGTH); + if (ret < 0) + return ret; + + ret = wait_for_completion_interruptible_timeout(&priv->fw_version_processed, + msecs_to_jiffies(STATUS_VALIDITY)); + if (ret == 0) + return -ETIMEDOUT; + else if (ret < 0) + return ret; + + return 0; +} + +static int __maybe_unused kraken3_reset_resume(struct hid_device *hdev) +{ + int ret; + + ret = kraken3_init_device(hdev); + if (ret) + hid_err(hdev, "req init (reset_resume) failed with %d\n", ret); + + return ret; +} + +static int firmware_version_show(struct seq_file *seqf, void *unused) +{ + struct kraken3_data *priv = seqf->private; + + seq_printf(seqf, "%u.%u.%u\n", priv->firmware_version[0], priv->firmware_version[1], + priv->firmware_version[2]); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(firmware_version); + +static void kraken3_debugfs_init(struct kraken3_data *priv) +{ + char name[64]; + + if (!priv->firmware_version[0]) + return; /* Nothing to display in debugfs */ + + scnprintf(name, sizeof(name), "%s_%s-%s", DRIVER_NAME, kraken3_device_names[priv->kind], + dev_name(&priv->hdev->dev)); + + priv->debugfs = debugfs_create_dir(name, NULL); + debugfs_create_file("firmware_version", 0444, priv->debugfs, priv, &firmware_version_fops); +} + +static int kraken3_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + struct kraken3_data *priv; + int ret; + + priv = devm_kzalloc(&hdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->hdev = hdev; + hid_set_drvdata(hdev, priv); + + /* + * Initialize ->updated to STATUS_VALIDITY seconds in the past, making + * the initial empty data invalid for kraken3_read without the need for + * a special case there. + */ + priv->updated = jiffies - msecs_to_jiffies(STATUS_VALIDITY); + + ret = hid_parse(hdev); + if (ret) { + hid_err(hdev, "hid parse failed with %d\n", ret); + return ret; + } + + /* Enable hidraw so existing user-space tools can continue to work */ + ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); + if (ret) { + hid_err(hdev, "hid hw start failed with %d\n", ret); + return ret; + } + + ret = hid_hw_open(hdev); + if (ret) { + hid_err(hdev, "hid hw open failed with %d\n", ret); + goto fail_and_stop; + } + + switch (hdev->product) { + case USB_PRODUCT_ID_X53: + case USB_PRODUCT_ID_X53_SECOND: + priv->kind = X53; + break; + case USB_PRODUCT_ID_Z53: + priv->kind = Z53; + break; + default: + break; + } + + priv->buffer = devm_kzalloc(&hdev->dev, MAX_REPORT_LENGTH, GFP_KERNEL); + if (!priv->buffer) { + ret = -ENOMEM; + goto fail_and_close; + } + + mutex_init(&priv->buffer_lock); + mutex_init(&priv->z53_status_request_lock); + init_completion(&priv->fw_version_processed); + init_completion(&priv->status_report_processed); + spin_lock_init(&priv->status_completion_lock); + + hid_device_io_start(hdev); + ret = kraken3_init_device(hdev); + if (ret < 0) { + hid_err(hdev, "device init failed with %d\n", ret); + goto fail_and_close; + } + + ret = kraken3_get_fw_ver(hdev); + if (ret < 0) + hid_warn(hdev, "fw version request failed with %d\n", ret); + + priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, + kraken3_device_names[priv->kind], priv, + &kraken3_chip_info, kraken3_groups); + if (IS_ERR(priv->hwmon_dev)) { + ret = PTR_ERR(priv->hwmon_dev); + hid_err(hdev, "hwmon registration failed with %d\n", ret); + goto fail_and_close; + } + + kraken3_debugfs_init(priv); + + return 0; + +fail_and_close: + hid_hw_close(hdev); +fail_and_stop: + hid_hw_stop(hdev); + return ret; +} + +static void kraken3_remove(struct hid_device *hdev) +{ + struct kraken3_data *priv = hid_get_drvdata(hdev); + + debugfs_remove_recursive(priv->debugfs); + hwmon_device_unregister(priv->hwmon_dev); + + hid_hw_close(hdev); + hid_hw_stop(hdev); +} + +static const struct hid_device_id kraken3_table[] = { + /* NZXT Kraken X53/X63/X73 have two possible product IDs */ + { HID_USB_DEVICE(USB_VENDOR_ID_NZXT, USB_PRODUCT_ID_X53) }, + { HID_USB_DEVICE(USB_VENDOR_ID_NZXT, USB_PRODUCT_ID_X53_SECOND) }, + { HID_USB_DEVICE(USB_VENDOR_ID_NZXT, USB_PRODUCT_ID_Z53) }, + { } +}; + +MODULE_DEVICE_TABLE(hid, kraken3_table); + +static struct hid_driver kraken3_driver = { + .name = DRIVER_NAME, + .id_table = kraken3_table, + .probe = kraken3_probe, + .remove = kraken3_remove, + .raw_event = kraken3_raw_event, +#ifdef CONFIG_PM + .reset_resume = kraken3_reset_resume, +#endif +}; + +static int __init kraken3_init(void) +{ + return hid_register_driver(&kraken3_driver); +} + +static void __exit kraken3_exit(void) +{ + hid_unregister_driver(&kraken3_driver); +} + +/* When compiled into the kernel, initialize after the HID bus */ +late_initcall(kraken3_init); +module_exit(kraken3_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jonas Malaco <jonas@protocubo.io>"); +MODULE_AUTHOR("Aleksa Savic <savicaleksa83@gmail.com>"); +MODULE_DESCRIPTION("Hwmon driver for NZXT Kraken X53/X63/X73, Z53/Z63/Z73 coolers"); |