diff options
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 16 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3399.dtsi | 8 |
2 files changed, 7 insertions, 17 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 03f195025390..204bdb9857b9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -406,8 +406,9 @@ wlan_pd_n: wlan-pd-n { compatible = "regulator-fixed"; regulator-name = "wlan_pd_n"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_module_reset_l>; - /* Note the wlan_module_reset_l pinctrl */ enable-active-high; gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; @@ -983,12 +984,6 @@ ap_i2c_audio: &i2c8 { pinctrl-0 = < &ap_pwroff /* AP will auto-assert this when in S3 */ &clk_32k /* This pin is always 32k on gru boards */ - - /* - * We want this driven low ASAP; firmware should help us, but - * we can help ourselves too. - */ - &wlan_module_reset_l >; pcfg_output_low: pcfg-output-low { @@ -1168,12 +1163,7 @@ ap_i2c_audio: &i2c8 { }; wlan_module_reset_l: wlan-module-reset-l { - /* - * We want this driven low ASAP (As {Soon,Strongly} As - * Possible), to avoid leakage through the powered-down - * WiFi. - */ - rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_host_wake_l: bt-host-wake-l { diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 2605118d4b4c..0b81ca1d07e7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -411,8 +411,8 @@ reg = <0x0 0xfe800000 0x0 0x100000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>; dr_mode = "otg"; - phys = <&u2phy0_otg>, <&tcphy0_usb3>; - phy-names = "usb2-phy", "usb3-phy"; + phys = <&u2phy0_otg>; + phy-names = "usb2-phy"; phy_type = "utmi_wide"; snps,dis_enblslpm_quirk; snps,dis-u2-freeclk-exists-quirk; @@ -444,8 +444,8 @@ reg = <0x0 0xfe900000 0x0 0x100000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; dr_mode = "otg"; - phys = <&u2phy1_otg>, <&tcphy1_usb3>; - phy-names = "usb2-phy", "usb3-phy"; + phys = <&u2phy1_otg>; + phy-names = "usb2-phy"; phy_type = "utmi_wide"; snps,dis_enblslpm_quirk; snps,dis-u2-freeclk-exists-quirk; |