diff options
| -rw-r--r-- | arch/x86/Kconfig | 31 | ||||
| -rw-r--r-- | arch/x86/Kconfig.debug | 6 | ||||
| -rw-r--r-- | arch/x86/include/asm/fixmap.h | 2 | ||||
| -rw-r--r-- | arch/x86/include/asm/setup.h | 2 | ||||
| -rw-r--r-- | arch/x86/kernel/early_printk.c | 2 | ||||
| -rw-r--r-- | arch/x86/kernel/smpboot.c | 16 | ||||
| -rw-r--r-- | arch/x86/kernel/tsc.c | 20 | ||||
| -rw-r--r-- | arch/x86/pci/Makefile | 2 | ||||
| -rw-r--r-- | arch/x86/platform/mrst/Makefile | 6 | ||||
| -rw-r--r-- | arch/x86/platform/mrst/mrst.c | 4 | ||||
| -rw-r--r-- | drivers/platform/x86/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/rtc/Kconfig | 6 | ||||
| -rw-r--r-- | init/calibrate.c | 15 |
13 files changed, 89 insertions, 25 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 2513da0e6b67..a150f4c35e94 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -420,12 +420,14 @@ config X86_MRST depends on PCI depends on PCI_GOANY depends on X86_IO_APIC + select X86_INTEL_MID + select SFI + select DW_APB_TIMER select APB_TIMER select I2C select SPI select INTEL_SCU_IPC select X86_PLATFORM_DEVICES - select X86_INTEL_MID ---help--- Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin Internet Device(MID) platform. Moorestown consists of two chips: @@ -434,6 +436,26 @@ config X86_MRST nor standard legacy replacement devices/features. e.g. Moorestown does not contain i8259, i8254, HPET, legacy BIOS, most of the io ports. +config X86_MDFLD + bool "Medfield MID platform" + depends on PCI + depends on PCI_GOANY + depends on X86_IO_APIC + select X86_INTEL_MID + select SFI + select DW_APB_TIMER + select APB_TIMER + select I2C + select SPI + select INTEL_SCU_IPC + select X86_PLATFORM_DEVICES + ---help--- + Medfield is Intel's Low Power Intel Architecture (LPIA) based Moblin + Internet Device(MID) platform. + Unlike standard x86 PCs, Medfield does not have many legacy devices + nor standard legacy replacement devices/features. e.g. Medfield does + not contain i8259, i8254, HPET, legacy BIOS, most of the io ports. + endif config X86_RDC321X @@ -631,7 +653,7 @@ config X86_SUMMIT_NUMA config X86_CYCLONE_TIMER def_bool y - depends on X86_32_NON_STANDARD + depends on X86_SUMMIT source "arch/x86/Kconfig.cpu" @@ -659,9 +681,10 @@ config HPET_EMULATE_RTC depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y) config APB_TIMER - def_bool y if MRST - prompt "Langwell APB Timer Support" if X86_MRST + def_bool y if X86_INTEL_MID + prompt "Intel MID APB Timer Support" if X86_INTEL_MID select DW_APB_TIMER + depends on X86_INTEL_MID && SFI help APB timer is the replacement for 8254, HPET on X86 MID platforms. The APBT provides a stable time base on SMP diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index aa4158f3ce62..e46c2147397f 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -43,9 +43,9 @@ config EARLY_PRINTK with klogd/syslogd or the X server. You should normally N here, unless you want to debug such a crash. -config EARLY_PRINTK_MRST - bool "Early printk for MRST platform support" - depends on EARLY_PRINTK && X86_MRST +config EARLY_PRINTK_INTEL_MID + bool "Early printk for Intel MID platform support" + depends on EARLY_PRINTK && X86_INTEL_MID config EARLY_PRINTK_DBGP bool "Early printk via EHCI debug port" diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index 460c74e4852c..4da3c0c4c974 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -117,7 +117,7 @@ enum fixed_addresses { #endif FIX_TEXT_POKE1, /* reserve 2 pages for text_poke() */ FIX_TEXT_POKE0, /* first page is last, because allocation is backward */ -#ifdef CONFIG_X86_MRST +#ifdef CONFIG_X86_INTEL_MID FIX_LNW_VRTC, #endif __end_of_permanent_fixed_addresses, diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h index 9756551ec760..d0f19f9fb846 100644 --- a/arch/x86/include/asm/setup.h +++ b/arch/x86/include/asm/setup.h @@ -47,7 +47,7 @@ extern void reserve_standard_io_resources(void); extern void i386_reserve_resources(void); extern void setup_default_timer_irq(void); -#ifdef CONFIG_X86_MRST +#ifdef CONFIG_X86_INTEL_MID extern void x86_mrst_early_setup(void); #else static inline void x86_mrst_early_setup(void) { } diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c index 9d42a52d2331..9b9f18b49918 100644 --- a/arch/x86/kernel/early_printk.c +++ b/arch/x86/kernel/early_printk.c @@ -240,7 +240,7 @@ static int __init setup_early_printk(char *buf) if (!strncmp(buf, "xen", 3)) early_console_register(&xenboot_console, keep); #endif -#ifdef CONFIG_EARLY_PRINTK_MRST +#ifdef CONFIG_EARLY_PRINTK_INTEL_MID if (!strncmp(buf, "mrst", 4)) { mrst_early_console_init(); early_console_register(&early_mrst_console, keep); diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 79f636bc44c6..66d250c00d11 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -207,23 +207,29 @@ static void __cpuinit smp_callin(void) * Need to setup vector mappings before we enable interrupts. */ setup_vector_irq(smp_processor_id()); + + /* + * Save our processor parameters. Note: this information + * is needed for clock calibration. + */ + smp_store_cpu_info(cpuid); + /* * Get our bogomips. + * Update loops_per_jiffy in cpu_data. Previous call to + * smp_store_cpu_info() stored a value that is close but not as + * accurate as the value just calculated. * * Need to enable IRQs because it can take longer and then * the NMI watchdog might kill us. */ local_irq_enable(); calibrate_delay(); + cpu_data(cpuid).loops_per_jiffy = loops_per_jiffy; local_irq_disable(); pr_debug("Stack at about %p\n", &cpuid); /* - * Save our processor parameters - */ - smp_store_cpu_info(cpuid); - - /* * This must be done before setting cpu_online_mask * or calling notify_cpu_starting. */ diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 2c9cf0fd78f5..c0dd5b603749 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -995,3 +995,23 @@ void __init tsc_init(void) check_system_tsc_reliable(); } +#ifdef CONFIG_SMP +/* + * If we have a constant TSC and are using the TSC for the delay loop, + * we can skip clock calibration if another cpu in the same socket has already + * been calibrated. This assumes that CONSTANT_TSC applies to all + * cpus in the socket - this should be a safe assumption. + */ +unsigned long __cpuinit calibrate_delay_is_known(void) +{ + int i, cpu = smp_processor_id(); + + if (!tsc_disabled && !cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC)) + return 0; + + for_each_online_cpu(i) + if (cpu_data(i).phys_proc_id == cpu_data(cpu).phys_proc_id) + return cpu_data(i).loops_per_jiffy; + return 0; +} +#endif diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index 6b8759f7634e..75b06f34b1f2 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -15,7 +15,7 @@ obj-$(CONFIG_X86_VISWS) += visws.o obj-$(CONFIG_X86_NUMAQ) += numaq_32.o -obj-$(CONFIG_X86_MRST) += mrst.o +obj-$(CONFIG_X86_INTEL_MID) += mrst.o obj-y += common.o early.o obj-y += amd_bus.o bus_numa.o diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile index 1ea38775a6d3..7baed5135e0f 100644 --- a/arch/x86/platform/mrst/Makefile +++ b/arch/x86/platform/mrst/Makefile @@ -1,4 +1,4 @@ -obj-$(CONFIG_X86_MRST) += mrst.o -obj-$(CONFIG_X86_MRST) += vrtc.o -obj-$(CONFIG_EARLY_PRINTK_MRST) += early_printk_mrst.o +obj-$(CONFIG_X86_INTEL_MID) += mrst.o +obj-$(CONFIG_X86_INTEL_MID) += vrtc.o +obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_mrst.o obj-$(CONFIG_X86_MRST) += pmu.o diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index ad4ec1cb097e..475e2cd0f3c3 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -848,8 +848,7 @@ static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry) if (mrst_has_msic()) return; - /* ID as IRQ is a hack that will go away */ - pdev = platform_device_alloc(entry->name, entry->irq); + pdev = platform_device_alloc(entry->name, 0); if (pdev == NULL) { pr_err("out of memory for SFI platform device '%s'.\n", entry->name); @@ -1030,6 +1029,7 @@ static int __init pb_keys_init(void) num = sizeof(gpio_button) / sizeof(struct gpio_keys_button); for (i = 0; i < num; i++) { gb[i].gpio = get_gpio_by_name(gb[i].desc); + pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc, gb[i].gpio); if (gb[i].gpio == -1) continue; diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 7f43cf86d776..f995e6e2f78c 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -639,7 +639,7 @@ config ACPI_CMPC config INTEL_SCU_IPC bool "Intel SCU IPC Support" - depends on X86_MRST + depends on X86_INTEL_MID default y ---help--- IPC is used to bridge the communications between kernel and SCU on diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 877cf6fdcf24..e19a4031f45e 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -498,9 +498,9 @@ config RTC_DRV_CMOS will be called rtc-cmos. config RTC_DRV_VRTC - tristate "Virtual RTC for Moorestown platforms" - depends on X86_MRST - default y if X86_MRST + tristate "Virtual RTC for Intel MID platforms" + depends on X86_INTEL_MID + default y if X86_INTEL_MID help Say "yes" here to get direct support for the real time clock diff --git a/init/calibrate.c b/init/calibrate.c index 24df7976816c..5f117ca9e069 100644 --- a/init/calibrate.c +++ b/init/calibrate.c @@ -246,6 +246,19 @@ recalibrate: static DEFINE_PER_CPU(unsigned long, cpu_loops_per_jiffy) = { 0 }; +/* + * Check if cpu calibration delay is already known. For example, + * some processors with multi-core sockets may have all cores + * with the same calibration delay. + * + * Architectures should override this function if a faster calibration + * method is available. + */ +unsigned long __attribute__((weak)) __cpuinit calibrate_delay_is_known(void) +{ + return 0; +} + void __cpuinit calibrate_delay(void) { unsigned long lpj; @@ -265,6 +278,8 @@ void __cpuinit calibrate_delay(void) lpj = lpj_fine; pr_info("Calibrating delay loop (skipped), " "value calculated using timer frequency.. "); + } else if ((lpj = calibrate_delay_is_known())) { + ; } else if ((lpj = calibrate_delay_direct()) != 0) { if (!printed) pr_info("Calibrating delay using timer " |