diff options
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-power-ltc4162l | 82 | ||||
| -rw-r--r-- | drivers/power/supply/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/power/supply/Makefile | 1 | ||||
| -rw-r--r-- | drivers/power/supply/ltc4162-l-charger.c | 931 |
4 files changed, 1022 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-power-ltc4162l b/Documentation/ABI/testing/sysfs-class-power-ltc4162l new file mode 100644 index 000000000000..ba30db93052b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-power-ltc4162l @@ -0,0 +1,82 @@ +What: /sys/class/power_supply/ltc4162-l/charge_status +Date: Januari 2021 +KernelVersion: 5.11 +Description: + Detailed charge status information as reported by the chip. + + Access: Read + + Valid values: + ilim_reg_active + thermal_reg_active + vin_uvcl_active + iin_limit_active + constant_current + constant_voltage + charger_off + +What: /sys/class/power_supply/ltc4162-l/ibat +Date: Januari 2021 +KernelVersion: 5.11 +Description: + Battery input current as measured by the charger. Negative value + means that the battery is discharging. + + Access: Read + + Valid values: Signed value in microamps + +What: /sys/class/power_supply/ltc4162-l/vbat +Date: Januari 2021 +KernelVersion: 5.11 +Description: + Battery voltage as measured by the charger. + + Access: Read + + Valid values: In microvolts + +What: /sys/class/power_supply/ltc4162-l/vbat_avg +Date: Januari 2021 +KernelVersion: 5.11 +Description: + Battery voltage, averaged over time, as measured by the charger. + + Access: Read + + Valid values: In microvolts + +What: /sys/class/power_supply/ltc4162-l/force_telemetry +Date: Januari 2021 +KernelVersion: 5.11 +Description: + To save battery current, the measurement system is disabled if + the battery is the only source of power. This affects all + voltage, current and temperature measurements. + Write a "1" to this to keep performing telemetry once every few + seconds, even when running on battery (as reported by the online + property, which is "1" when external power is available and "0" + when the system runs on battery). + + Access: Read, Write + + Valid values: 0 (disabled) or 1 (enabled) + +What: /sys/class/power_supply/ltc4162-l/arm_ship_mode +Date: Januari 2021 +KernelVersion: 5.11 +Description: + The charger will normally drain the battery while inactive, + typically drawing about 54 microamps. Write a "1" to this + property to arm a special "ship" mode that extends shelf life + by reducing the leakage to about 2.8 microamps. The chip will + remain in this mode (and no longer respond to I2C commands) + until some external power-supply is attached raising the input + voltage above 1V. It will then automatically revert to "0". + Writing a "0" to the property cancels the "ship" mode request. + The ship mode, when armed, activates once the input voltage + drops below 1V. + + Access: Read, Write + + Valid values: 0 (disable) or 1 (enable) diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index ef1d69b019ee..c95ba6c8c111 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -513,6 +513,14 @@ config CHARGER_LT3651 Say Y to include support for the Analog Devices (Linear Technology) LT3651 battery charger which reports its status via GPIO lines. +config CHARGER_LTC4162L + tristate "LTC4162-L charger" + depends on I2C + select REGMAP_I2C + help + Say Y to include support for the Analog Devices (Linear Technology) + LTC4162-L battery charger connected to I2C. + config CHARGER_MAX14577 tristate "Maxim MAX14577/77836 battery charger driver" depends on MFD_MAX14577 diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index ae322b1da1ed..ae3d9c83c790 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -70,6 +70,7 @@ obj-$(CONFIG_CHARGER_LP8788) += lp8788-charger.o obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o obj-$(CONFIG_CHARGER_LT3651) += lt3651-charger.o +obj-$(CONFIG_CHARGER_LTC4162L) += ltc4162-l-charger.o obj-$(CONFIG_CHARGER_MAX14577) += max14577_charger.o obj-$(CONFIG_CHARGER_DETECTOR_MAX14656) += max14656_charger_detector.o obj-$(CONFIG_CHARGER_MAX77650) += max77650-charger.o diff --git a/drivers/power/supply/ltc4162-l-charger.c b/drivers/power/supply/ltc4162-l-charger.c new file mode 100644 index 000000000000..cded6484febb --- /dev/null +++ b/drivers/power/supply/ltc4162-l-charger.c @@ -0,0 +1,931 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Driver for Analog Devices (Linear Technology) LTC4162-L charger IC. + * Copyright (C) 2020, Topic Embedded Products + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/of_device.h> +#include <linux/pm_runtime.h> +#include <linux/power_supply.h> +#include <linux/i2c.h> +#include <linux/regmap.h> + +/* Registers (names based on what datasheet uses) */ +#define LTC4162L_EN_LIMIT_ALERTS_REG 0x0D +#define LTC4162L_EN_CHARGER_STATE_ALERTS_REG 0x0E +#define LTC4162L_EN_CHARGE_STATUS_ALERTS_REG 0x0F +#define LTC4162L_CONFIG_BITS_REG 0x14 +#define LTC4162L_IIN_LIMIT_TARGET 0x15 +#define LTC4162L_ARM_SHIP_MODE 0x19 +#define LTC4162L_CHARGE_CURRENT_SETTING 0X1A +#define LTC4162L_VCHARGE_SETTING 0X1B +#define LTC4162L_C_OVER_X_THRESHOLD 0x1C +#define LTC4162L_MAX_CV_TIME 0X1D +#define LTC4162L_MAX_CHARGE_TIME 0X1E +#define LTC4162L_CHARGER_CONFIG_BITS 0x29 +#define LTC4162L_CHARGER_STATE 0x34 +#define LTC4162L_CHARGE_STATUS 0x35 +#define LTC4162L_LIMIT_ALERTS_REG 0x36 +#define LTC4162L_CHARGER_STATE_ALERTS_REG 0x37 +#define LTC4162L_CHARGE_STATUS_ALERTS_REG 0x38 +#define LTC4162L_SYSTEM_STATUS_REG 0x39 +#define LTC4162L_VBAT 0x3A +#define LTC4162L_VIN 0x3B +#define LTC4162L_VOUT 0x3C +#define LTC4162L_IBAT 0x3D +#define LTC4162L_IIN 0x3E +#define LTC4162L_DIE_TEMPERATURE 0x3F +#define LTC4162L_THERMISTOR_VOLTAGE 0x40 +#define LTC4162L_BSR 0x41 +#define LTC4162L_JEITA_REGION 0x42 +#define LTC4162L_CHEM_CELLS_REG 0x43 +#define LTC4162L_ICHARGE_DAC 0x44 +#define LTC4162L_VCHARGE_DAC 0x45 +#define LTC4162L_IIN_LIMIT_DAC 0x46 +#define LTC4162L_VBAT_FILT 0x47 +#define LTC4162L_INPUT_UNDERVOLTAGE_DAC 0x4B + +/* Enumeration as in datasheet. Individual bits are mutually exclusive. */ +enum ltc4162l_state { + battery_detection = 2048, + charger_suspended = 256, + precharge = 128, /* trickle on low bat voltage */ + cc_cv_charge = 64, /* normal charge */ + ntc_pause = 32, + timer_term = 16, + c_over_x_term = 8, /* battery is full */ + max_charge_time_fault = 4, + bat_missing_fault = 2, + bat_short_fault = 1 +}; + +/* Individual bits are mutually exclusive. Only active in charging states.*/ +enum ltc4162l_charge_status { + ilim_reg_active = 32, + thermal_reg_active = 16, + vin_uvcl_active = 8, + iin_limit_active = 4, + constant_current = 2, + constant_voltage = 1, + charger_off = 0 +}; + +/* Magic number to write to ARM_SHIP_MODE register */ +#define LTC4162L_ARM_SHIP_MODE_MAGIC 21325 + +struct ltc4162l_info { + struct i2c_client *client; + struct regmap *regmap; + struct power_supply *charger; + u32 rsnsb; /* Series resistor that sets charge current, microOhm */ + u32 rsnsi; /* Series resistor to measure input current, microOhm */ + u8 cell_count; /* Number of connected cells, 0 while unknown */ +}; + +static u8 ltc4162l_get_cell_count(struct ltc4162l_info *info) +{ + int ret; + unsigned int val; + + /* Once read successfully */ + if (info->cell_count) + return info->cell_count; + + ret = regmap_read(info->regmap, LTC4162L_CHEM_CELLS_REG, &val); + if (ret) + return 0; + + /* Lower 4 bits is the cell count, or 0 if the chip doesn't know yet */ + val &= 0x0f; + if (!val) + return 0; + + /* Once determined, keep the value */ + info->cell_count = val; + + return val; +}; + +/* Convert enum value to POWER_SUPPLY_STATUS value */ +static int ltc4162l_state_decode(enum ltc4162l_state value) +{ + switch (value) { + case precharge: + case cc_cv_charge: + return POWER_SUPPLY_STATUS_CHARGING; + case c_over_x_term: + return POWER_SUPPLY_STATUS_FULL; + case bat_missing_fault: + case bat_short_fault: + return POWER_SUPPLY_STATUS_UNKNOWN; + default: + return POWER_SUPPLY_STATUS_NOT_CHARGING; + } +}; + +static int ltc4162l_get_status(struct ltc4162l_info *info, + union power_supply_propval *val) +{ + unsigned int regval; + int ret; + + ret = regmap_read(info->regmap, LTC4162L_CHARGER_STATE, ®val); + if (ret) { + dev_err(&info->client->dev, "Failed to read CHARGER_STATE\n"); + return ret; + } + + val->intval = ltc4162l_state_decode(regval); + + return 0; +} + +static int ltc4162l_charge_status_decode(enum ltc4162l_charge_status value) +{ + if (!value) + return POWER_SUPPLY_CHARGE_TYPE_NONE; + + /* constant voltage/current and input_current limit are "fast" modes */ + if (value <= iin_limit_active) + return POWER_SUPPLY_CHARGE_TYPE_FAST; + + /* Anything that's not fast we'll return as trickle */ + return POWER_SUPPLY_CHARGE_TYPE_TRICKLE; +} + +static int ltc4162l_get_charge_type(struct ltc4162l_info *info, + union power_supply_propval *val) +{ + unsigned int regval; + int ret; + + ret = regmap_read(info->regmap, LTC4162L_CHARGE_STATUS, ®val); + if (ret) + return ret; + + val->intval = ltc4162l_charge_status_decode(regval); + + return 0; +} + +static int ltc4162l_state_to_health(enum ltc4162l_state value) +{ + switch (value) { + case ntc_pause: + return POWER_SUPPLY_HEALTH_OVERHEAT; + case timer_term: + return POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; + case max_charge_time_fault: + return POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE; + case bat_missing_fault: + return POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + case bat_short_fault: + return POWER_SUPPLY_HEALTH_DEAD; + default: + return POWER_SUPPLY_HEALTH_GOOD; + } +} + +static int ltc4162l_get_health(struct ltc4162l_info *info, + union power_supply_propval *val) +{ + unsigned int regval; + int ret; + + ret = regmap_read(info->regmap, LTC4162L_CHARGER_STATE, ®val); + if (ret) + return ret; + + val->intval = ltc4162l_state_to_health(regval); + + return 0; +} + +static int ltc4162l_get_online(struct ltc4162l_info *info, + union power_supply_propval *val) +{ + unsigned int regval; + int ret; + + ret = regmap_read(info->regmap, LTC4162L_SYSTEM_STATUS_REG, ®val); + if (ret) + return ret; + + /* BIT(2) indicates if input voltage is sufficient to charge */ + val->intval = !!(regval & BIT(2)); + + return 0; +} + +static int ltc4162l_get_vbat(struct ltc4162l_info *info, + unsigned int reg, + union power_supply_propval *val) +{ + unsigned int regval; + int ret; + + ret = regmap_read(info->regmap, reg, ®val); + if (ret) + return ret; + + /* cell_count × 192.4μV/LSB */ + regval *= 1924; + regval *= ltc4162l_get_cell_count(info); + regval /= 10; + val->intval = regval; + + return 0; +} + +static int ltc4162l_get_ibat(struct ltc4162l_info *info, + union power_supply_propval *val) +{ + unsigned int regval; + int ret; + + ret = regmap_read(info->regmap, LTC4162L_IBAT, ®val); + if (ret) + return ret; + + /* Signed 16-bit number, 1.466μV / RSNSB amperes/LSB. */ + ret = (s16)(regval & 0xFFFF); + val->intval = 100 * mult_frac(ret, 14660, (int)info->rsnsb); + + return 0; +} + + +static int ltc4162l_get_input_voltage(struct ltc4162l_info *info, + union power_supply_propval *val) +{ + unsigned int regval; + int ret; + + ret = regmap_read(info->regmap, LTC4162L_VIN, ®val); + if (ret) + return ret; + + /* 1.649mV/LSB */ + val->intval = regval * 1694; + + return 0; +} + +static int ltc4162l_get_input_current(struct ltc4162l_info *info, + union power_supply_propval *val) +{ + unsigned int regval; + int ret; + + ret = regmap_read(info->regmap, LTC4162L_IIN, ®val); + if (ret) + return ret; + + /* Signed 16-bit number, 1.466μV / RSNSI amperes/LSB. */ + ret = (s16)(regval & 0xFFFF); + ret *= 14660; + ret /= info->rsnsi; + ret *= 100; + + val->intval = ret; + + return 0; +} + +static int ltc4162l_get_icharge(struct ltc4162l_info *info, + unsigned int reg, + union power_supply_propval *val) +{ + unsigned int regval; + int ret; + + ret = regmap_read(info->regmap, reg, ®val); + if (ret) + return ret; + + regval &= BIT(6) - 1; /* Only the lower 5 bits */ + + /* The charge current servo level: (icharge_dac + 1) × 1mV/RSNSB */ + ++regval; + val->intval = 10000u * mult_frac(regval, 100000u, info->rsnsb); + + return 0; +} + +static int ltc4162l_set_icharge(struct ltc4162l_info *info, + unsigned int reg, + unsigned int value) +{ + value = mult_frac(value, info->rsnsb, 100000u); + value /= 10000u; + + /* Round to lowest possible */ + if (value) + --value; + + if (value > 31) + return -EINVAL; + + return regmap_write(info->regmap, reg, value); +} + + +static int ltc4162l_get_vcharge(struct ltc4162l_info *info, + unsigned int reg, + union power_supply_propval *val) +{ + unsigned int regval; + int ret; + u32 voltage; + + ret = regmap_read(info->regmap, reg, ®val); + if (ret) + return ret; + + regval &= BIT(6) - 1; /* Only the lower 5 bits */ + + /* + * charge voltage setting can be computed from + * cell_count × (vcharge_setting × 12.5mV + 3.8125V) + * where vcharge_setting ranges from 0 to 31 (4.2V max). + */ + voltage = 3812500 + (regval * 12500); + voltage *= ltc4162l_get_cell_count(info); + val->intval = voltage; + + return 0; +} + +static int ltc4162l_set_vcharge(struct ltc4162l_info *info, + unsigned int reg, + unsigned int value) +{ + u8 cell_count = ltc4162l_get_cell_count(info); + + if (!cell_count) + return -EBUSY; /* Not available yet, try again later */ + + value /= cell_count; + + if (value < 3812500) + return -EINVAL; + + value -= 3812500; + value /= 12500; + + if (value > 31) + return -EINVAL; + + return regmap_write(info->regmap, reg, value); +} + +static int ltc4162l_get_iin_limit_dac(struct ltc4162l_info *info, + union power_supply_propval *val) +{ + unsigned int regval; + int ret; + + ret = regmap_read(info->regmap, LTC4162L_IIN_LIMIT_DAC, ®val); + if (ret) + return ret; + + regval &= BIT(6) - 1; /* Only 6 bits */ + + /* (iin_limit_dac + 1) × 500μV / RSNSI */ + ++regval; + regval *= 5000000u; + regval /= info->rsnsi; + val->intval = 100u * regval; + + return 0; +} + +static int ltc4162l_set_iin_limit(struct ltc4162l_info *info, + unsigned int value) +{ + unsigned int regval; + + regval = mult_frac(value, info->rsnsi, 50000u); + regval /= 10000u; + if (regval) + --regval; + if (regval > 63) + regval = 63; + + return regmap_write(info->regmap, LTC4162L_IIN_LIMIT_TARGET, regval); +} + +static int ltc4162l_get_die_temp(struct ltc4162l_info *info, + union power_supply_propval *val) +{ + unsigned int regval; + int ret; + + ret = regmap_read(info->regmap, LTC4162L_DIE_TEMPERATURE, ®val); + if (ret) + return ret; + + /* die_temp × 0.0215°C/LSB - 264.4°C */ + ret = (s16)(regval & 0xFFFF); + ret *= 215; + ret /= 100; /* Centidegrees scale */ + ret -= 26440; + val->intval = ret; + + return 0; +} + +static int ltc4162l_get_term_current(struct ltc4162l_info *info, + union power_supply_propval *val) +{ + unsigned int regval; + int ret; + + ret = regmap_read(info->regmap, LTC4162L_CHARGER_CONFIG_BITS, ®val); + if (ret) + return ret; + + /* Check if C_OVER_X_THRESHOLD is enabled */ + if (!(regval & BIT(2))) { + val->intval = 0; + return 0; + } + + ret = regmap_read(info->regmap, LTC4162L_C_OVER_X_THRESHOLD, ®val); + if (ret) + return ret; + + /* 1.466μV / RSNSB amperes/LSB */ + regval *= 14660u; + regval /= info->rsnsb; + val->intval = 100 * regval; + + return 0; +} + +static int ltc4162l_set_term_current(struct ltc4162l_info *info, + unsigned int value) +{ + int ret; + unsigned int regval; + + if (!value) { + /* Disable en_c_over_x_term when set to zero */ + return regmap_update_bits(info->regmap, + LTC4162L_CHARGER_CONFIG_BITS, + BIT(2), 0); + } + + regval = mult_frac(value, info->rsnsb, 14660u); + regval /= 100u; + + ret = regmap_write(info->regmap, LTC4162L_C_OVER_X_THRESHOLD, regval); + if (ret) + return ret; + + /* Set en_c_over_x_term after changing the threshold value */ + return regmap_update_bits(info->regmap, LTC4162L_CHARGER_CONFIG_BITS, + BIT(2), BIT(2)); +} + +/* Custom properties */ +static const char * const ltc4162l_charge_status_name[] = { + "ilim_reg_active", /* 32 */ + "thermal_reg_active", + "vin_uvcl_active", + "iin_limit_active", + "constant_current", + "constant_voltage", + "charger_off" /* 0 */ +}; + +static ssize_t charge_status_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct power_supply *psy = to_power_supply(dev); + struct ltc4162l_info *info = power_supply_get_drvdata(psy); + const char *result = ltc4162l_charge_status_name[ + ARRAY_SIZE(ltc4162l_charge_status_name) - 1]; + unsigned int regval; + unsigned int mask; + unsigned int index; + int ret; + + ret = regmap_read(info->regmap, LTC4162L_CHARGE_STATUS, ®val); + if (ret) + return ret; + + /* Only one bit is set according to datasheet, let's be safe here */ + for (mask = 32, index = 0; mask != 0; mask >>= 1, ++index) { + if (regval & mask) { + result = ltc4162l_charge_status_name[index]; + break; + } + } + + return sprintf(buf, "%s\n", result); +} +static DEVICE_ATTR_RO(charge_status); + +static ssize_t vbat_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct power_supply *psy = to_power_supply(dev); + struct ltc4162l_info *info = power_supply_get_drvdata(psy); + union power_supply_propval val; + int ret; + + ret = ltc4162l_get_vbat(info, LTC4162L_VBAT, &val); + if (ret) + return ret; + + return sprintf(buf, "%d\n", val.intval); +} +static DEVICE_ATTR_RO(vbat); + +static ssize_t vbat_avg_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct power_supply *psy = to_power_supply(dev); + struct ltc4162l_info *info = power_supply_get_drvdata(psy); + union power_supply_propval val; + int ret; + + ret = ltc4162l_get_vbat(info, LTC4162L_VBAT_FILT, &val); + if (ret) + return ret; + + return sprintf(buf, "%d\n", val.intval); +} +static DEVICE_ATTR_RO(vbat_avg); + +static ssize_t ibat_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct power_supply *psy = to_power_supply(dev); + struct ltc4162l_info *info = power_supply_get_drvdata(psy); + union power_supply_propval val; + int ret; + + ret = ltc4162l_get_ibat(info, &val); + if (ret) + return ret; + + return sprintf(buf, "%d\n", val.intval); +} +static DEVICE_ATTR_RO(ibat); + +static ssize_t force_telemetry_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct power_supply *psy = to_power_supply(dev); + struct ltc4162l_info *info = power_supply_get_drvdata(psy); + unsigned int regval; + int ret; + + ret = regmap_read(info->regmap, LTC4162L_CONFIG_BITS_REG, ®val); + if (ret) + return ret; + + return sprintf(buf, "%u\n", regval & BIT(2) ? 1 : 0); +} + +static ssize_t force_telemetry_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct power_supply *psy = to_power_supply(dev); + struct ltc4162l_info *info = power_supply_get_drvdata(psy); + int ret; + unsigned int value; + + ret = kstrtouint(buf, 0, &value); + if (ret < 0) + return ret; + + ret = regmap_update_bits(info->regmap, LTC4162L_CONFIG_BITS_REG, + BIT(2), value ? BIT(2) : 0); + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR_RW(force_telemetry); + +static ssize_t arm_ship_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct power_supply *psy = to_power_supply(dev); + struct ltc4162l_info *info = power_supply_get_drvdata(psy); + unsigned int regval; + int ret; + + ret = regmap_read(info->regmap, LTC4162L_ARM_SHIP_MODE, ®val); + if (ret) + return ret; + + return sprintf(buf, "%u\n", + regval == LTC4162L_ARM_SHIP_MODE_MAGIC ? 1 : 0); +} + +static ssize_t arm_ship_mode_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct power_supply *psy = to_power_supply(dev); + struct ltc4162l_info *info = power_supply_get_drvdata(psy); + int ret; + unsigned int value; + + ret = kstrtouint(buf, 0, &value); + if (ret < 0) + return ret; + + ret = regmap_write(info->regmap, LTC4162L_ARM_SHIP_MODE, + value ? LTC4162L_ARM_SHIP_MODE_MAGIC : 0); + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR_RW(arm_ship_mode); + +static struct attribute *ltc4162l_sysfs_entries[] = { + &dev_attr_charge_status.attr, + &dev_attr_ibat.attr, + &dev_attr_vbat.attr, + &dev_attr_vbat_avg.attr, + &dev_attr_force_telemetry.attr, + &dev_attr_arm_ship_mode.attr, + NULL, +}; + +static struct attribute_group ltc4162l_attr_group = { + .name = NULL, /* put in device directory */ + .attrs = ltc4162l_sysfs_entries, +}; + +static const struct attribute_group *ltc4162l_attr_groups[] = { + <c4162l_attr_group, + NULL, +}; + +static int ltc4162l_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct ltc4162l_info *info = power_supply_get_drvdata(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + return ltc4162l_get_status(info, val); + case POWER_SUPPLY_PROP_CHARGE_TYPE: + return ltc4162l_get_charge_type(info, val); + case POWER_SUPPLY_PROP_HEALTH: + return ltc4162l_get_health(info, val); + case POWER_SUPPLY_PROP_ONLINE: + return ltc4162l_get_online(info, val); + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + return ltc4162l_get_input_voltage(info, val); + case POWER_SUPPLY_PROP_CURRENT_NOW: + return ltc4162l_get_input_current(info, val); + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + return ltc4162l_get_icharge(info, + LTC4162L_ICHARGE_DAC, val); + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + return ltc4162l_get_icharge(info, + LTC4162L_CHARGE_CURRENT_SETTING, val); + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: + return ltc4162l_get_vcharge(info, + LTC4162L_VCHARGE_DAC, val); + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: + return ltc4162l_get_vcharge(info, + LTC4162L_VCHARGE_SETTING, val); + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + return ltc4162l_get_iin_limit_dac(info, val); + case POWER_SUPPLY_PROP_TEMP: + return ltc4162l_get_die_temp(info, val); + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: + return ltc4162l_get_term_current(info, val); + default: + return -EINVAL; + } +} + +static int ltc4162l_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct ltc4162l_info *info = power_supply_get_drvdata(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + return ltc4162l_set_icharge(info, + LTC4162L_CHARGE_CURRENT_SETTING, val->intval); + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: + return ltc4162l_set_vcharge(info, + LTC4162L_VCHARGE_SETTING, val->intval); + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + return ltc4162l_set_iin_limit(info, val->intval); + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: + return ltc4162l_set_term_current(info, val->intval); + default: + return -EINVAL; + } +} + +static int ltc4162l_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + switch (psp) { + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: + return 1; + default: + return 0; + } +} + +/* Charger power supply property routines */ +static enum power_supply_property ltc4162l_properties[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT, +}; + +static const struct power_supply_desc ltc4162l_desc = { + .name = "ltc4162-l", + .type = POWER_SUPPLY_TYPE_MAINS, + .properties = ltc4162l_properties, + .num_properties = ARRAY_SIZE(ltc4162l_properties), + .get_property = ltc4162l_get_property, + .set_property = ltc4162l_set_property, + .property_is_writeable = ltc4162l_property_is_writeable, +}; + +static bool ltc4162l_is_writeable_reg(struct device *dev, unsigned int reg) +{ + /* all registers up to this one are writeable */ + if (reg <= LTC4162L_CHARGER_CONFIG_BITS) + return true; + + /* The ALERTS registers can be written to clear alerts */ + if (reg >= LTC4162L_LIMIT_ALERTS_REG && + reg <= LTC4162L_CHARGE_STATUS_ALERTS_REG) + return true; + + return false; +} + +static bool ltc4162l_is_volatile_reg(struct device *dev, unsigned int reg) +{ + /* all registers after this one are read-only status registers */ + return reg > LTC4162L_CHARGER_CONFIG_BITS; +} + +static const struct regmap_config ltc4162l_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .val_format_endian = REGMAP_ENDIAN_LITTLE, + .writeable_reg = ltc4162l_is_writeable_reg, + .volatile_reg = ltc4162l_is_volatile_reg, + .max_register = LTC4162L_INPUT_UNDERVOLTAGE_DAC, + .cache_type = REGCACHE_RBTREE, +}; + +static void ltc4162l_clear_interrupts(struct ltc4162l_info *info) +{ + /* Acknowledge interrupt to chip by clearing all events */ + regmap_write(info->regmap, LTC4162L_LIMIT_ALERTS_REG, 0); + regmap_write(info->regmap, LTC4162L_CHARGER_STATE_ALERTS_REG, 0); + regmap_write(info->regmap, LTC4162L_CHARGE_STATUS_ALERTS_REG, 0); +} + +static int ltc4162l_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = client->adapter; + struct device *dev = &client->dev; + struct ltc4162l_info *info; + struct power_supply_config ltc4162l_config = {}; + u32 value; + int ret; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_err(dev, "No support for SMBUS_WORD_DATA\n"); + return -ENODEV; + } + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->client = client; + i2c_set_clientdata(client, info); + + info->regmap = devm_regmap_init_i2c(client, <c4162l_regmap_config); + if (IS_ERR(info->regmap)) { + dev_err(dev, "Failed to initialize register map\n"); + return PTR_ERR(info->regmap); + } + + ret = device_property_read_u32(dev, "lltc,rsnsb-micro-ohms", + &info->rsnsb); + if (ret) { + dev_err(dev, "Missing lltc,rsnsb-micro-ohms property\n"); + return ret; + } + if (!info->rsnsb) + return -EINVAL; + + ret = device_property_read_u32(dev, "lltc,rsnsi-micro-ohms", + &info->rsnsi); + if (ret) { + dev_err(dev, "Missing lltc,rsnsi-micro-ohms property\n"); + return ret; + } + if (!info->rsnsi) + return -EINVAL; + + if (!device_property_read_u32(dev, "lltc,cell-count", &value)) + info->cell_count = value; + + ltc4162l_config.of_node = dev->of_node; + ltc4162l_config.drv_data = info; + ltc4162l_config.attr_grp = ltc4162l_attr_groups; + + info->charger = devm_power_supply_register(dev, <c4162l_desc, + <c4162l_config); + if (IS_ERR(info->charger)) { + dev_err(dev, "Failed to register charger\n"); + return PTR_ERR(info->charger); + } + + /* Disable the threshold alerts, we're not using them */ + regmap_write(info->regmap, LTC4162L_EN_LIMIT_ALERTS_REG, 0); + + /* Enable interrupts on all status changes */ + regmap_write(info->regmap, LTC4162L_EN_CHARGER_STATE_ALERTS_REG, + 0x1fff); + regmap_write(info->regmap, LTC4162L_EN_CHARGE_STATUS_ALERTS_REG, 0x1f); + + ltc4162l_clear_interrupts(info); + + return 0; +} + +static void ltc4162l_alert(struct i2c_client *client, + enum i2c_alert_protocol type, unsigned int flag) +{ + struct ltc4162l_info *info = i2c_get_clientdata(client); + + if (type != I2C_PROTOCOL_SMBUS_ALERT) + return; + + ltc4162l_clear_interrupts(info); + power_supply_changed(info->charger); +} + +static const struct i2c_device_id ltc4162l_i2c_id_table[] = { + { "ltc4162-l", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, ltc4162l_i2c_id_table); + +static const struct of_device_id ltc4162l_of_match[] = { + { .compatible = "lltc,ltc4162-l", }, + { }, +}; +MODULE_DEVICE_TABLE(of, ltc4162l_of_match); + +static struct i2c_driver ltc4162l_driver = { + .probe = ltc4162l_probe, + .alert = ltc4162l_alert, + .id_table = ltc4162l_i2c_id_table, + .driver = { + .name = "ltc4162-l-charger", + .of_match_table = of_match_ptr(ltc4162l_of_match), + }, +}; +module_i2c_driver(ltc4162l_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>"); +MODULE_DESCRIPTION("LTC4162-L charger driver"); |