summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/kbuild/makefiles.txt6
-rw-r--r--Makefile160
-rw-r--r--arch/m68knommu/Makefile2
-rw-r--r--arch/mips/Makefile2
-rw-r--r--drivers/block/Kconfig42
-rw-r--r--include/asm-generic/vmlinux.lds.h9
-rw-r--r--init/Kconfig22
-rw-r--r--init/Makefile3
-rw-r--r--scripts/Kbuild.include96
-rw-r--r--scripts/Makefile.build7
-rw-r--r--scripts/Makefile.clean14
-rw-r--r--scripts/Makefile.host3
-rw-r--r--scripts/Makefile.lib99
-rw-r--r--scripts/Makefile.modinst2
-rw-r--r--scripts/Makefile.modpost1
-rw-r--r--scripts/conmakehash.c2
-rw-r--r--scripts/kallsyms.c6
-rw-r--r--scripts/kconfig/lkc.h2
-rw-r--r--scripts/kconfig/menu.c4
-rw-r--r--scripts/kconfig/zconf.tab.c_shipped8
-rw-r--r--scripts/kconfig/zconf.y8
-rwxr-xr-xscripts/kernel-doc8
-rw-r--r--scripts/lxdialog/dialog.h2
-rw-r--r--scripts/lxdialog/inputbox.c4
-rwxr-xr-xscripts/mkcompile_h12
-rw-r--r--scripts/mod/sumversion.c8
-rw-r--r--scripts/package/Makefile24
-rw-r--r--scripts/package/builddeb56
-rw-r--r--scripts/package/buildtar111
-rwxr-xr-xscripts/package/mkspec9
-rw-r--r--scripts/reference_discarded.pl1
-rw-r--r--scripts/reference_init.pl1
-rw-r--r--scripts/setlocalversion56
-rw-r--r--usr/Kconfig46
-rw-r--r--usr/Makefile2
35 files changed, 547 insertions, 291 deletions
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 2616a58a5a4b..9a1586590d82 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -872,7 +872,13 @@ When kbuild executes the following steps are followed (roughly):
Assignments to $(targets) are without $(obj)/ prefix.
if_changed may be used in conjunction with custom commands as
defined in 6.7 "Custom kbuild commands".
+
Note: It is a typical mistake to forget the FORCE prerequisite.
+ Another common pitfall is that whitespace is sometimes
+ significant; for instance, the below will fail (note the extra space
+ after the comma):
+ target: source(s) FORCE
+ #WRONG!# $(call if_changed, ld/objcopy/gzip)
ld
Link target. Often LDFLAGS_$@ is used to set specific options to ld.
diff --git a/Makefile b/Makefile
index 2d68adbcfa28..63e5c9f0bc7a 100644
--- a/Makefile
+++ b/Makefile
@@ -109,10 +109,9 @@ $(if $(KBUILD_OUTPUT),, \
.PHONY: $(MAKECMDGOALS)
$(filter-out _all,$(MAKECMDGOALS)) _all:
- $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
- KBUILD_SRC=$(CURDIR) KBUILD_VERBOSE=$(KBUILD_VERBOSE) \
- KBUILD_CHECK=$(KBUILD_CHECK) KBUILD_EXTMOD="$(KBUILD_EXTMOD)" \
- -f $(CURDIR)/Makefile $@
+ $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
+ KBUILD_SRC=$(CURDIR) \
+ KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@
# Leave processing to above invocation of make
skip-makefile := 1
@@ -233,7 +232,7 @@ ifeq ($(MAKECMDGOALS),)
KBUILD_MODULES := 1
endif
-export KBUILD_MODULES KBUILD_BUILTIN KBUILD_VERBOSE
+export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
# Beautify output
@@ -309,6 +308,9 @@ cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh \
# Look for make include files relative to root of kernel src
MAKEFLAGS += --include-dir=$(srctree)
+# We need some generic definitions
+include $(srctree)/scripts/Kbuild.include
+
# For maximum performance (+ possibly random breakage, uncomment
# the following)
@@ -348,7 +350,7 @@ LINUXINCLUDE := -Iinclude \
CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
-CFLAGS := -Wall -Wstrict-prototypes -Wno-trigraphs \
+CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common \
-ffreestanding
AFLAGS := -D__ASSEMBLY__
@@ -367,11 +369,6 @@ export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
# even be read-only.
export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
-# The temporary file to save gcc -MD generated dependencies must not
-# contain a comma
-comma := ,
-depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
-
# Files to ignore in find ... statements
RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg \) -prune -o
@@ -551,6 +548,26 @@ export KBUILD_IMAGE ?= vmlinux
# images. Default is /boot, but you can set it to other values
export INSTALL_PATH ?= /boot
+# If CONFIG_LOCALVERSION_AUTO is set, we automatically perform some tests
+# and try to determine if the current source tree is a release tree, of any sort,
+# or if is a pure development tree.
+#
+# A 'release tree' is any tree with a git TAG associated
+# with it. The primary goal of this is to make it safe for a native
+# git/CVS/SVN user to build a release tree (i.e, 2.6.9) and also to
+# continue developing against the current Linus tree, without having the Linus
+# tree overwrite the 2.6.9 tree when installed.
+#
+# Currently, only git is supported.
+# Other SCMs can edit scripts/setlocalversion and add the appropriate
+# checks as needed.
+
+
+ifdef CONFIG_LOCALVERSION_AUTO
+ localversion-auto := $(shell $(PERL) $(srctree)/scripts/setlocalversion $(srctree))
+ LOCALVERSION := $(LOCALVERSION)$(localversion-auto)
+endif
+
#
# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
# relocations required by build roots. This is not defined in the
@@ -691,8 +708,10 @@ endef
# Update vmlinux version before link
# Use + in front of this rule to silent warning about make -j1
+# First command is ':' to allow us to use + in front of this rule
cmd_ksym_ld = $(cmd_vmlinux__)
define rule_ksym_ld
+ :
+$(call cmd,vmlinux_version)
$(call cmd,vmlinux__)
$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
@@ -722,6 +741,16 @@ quiet_cmd_kallsyms = KSYM $@
# Needs to visit scripts/ before $(KALLSYMS) can be used.
$(KALLSYMS): scripts ;
+# Generate some data for debugging strange kallsyms problems
+debug_kallsyms: .tmp_map$(last_kallsyms)
+
+.tmp_map%: .tmp_vmlinux% FORCE
+ ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
+
+.tmp_map3: .tmp_map2
+
+.tmp_map2: .tmp_map1
+
endif # ifdef CONFIG_KALLSYMS
# vmlinux image - including updated kernel symbols
@@ -757,7 +786,7 @@ $(vmlinux-dirs): prepare-all scripts
prepare2:
ifneq ($(KBUILD_SRC),)
@echo ' Using $(srctree) as source for kernel'
- $(Q)if [ -h $(srctree)/include/asm -o -f $(srctree)/.config ]; then \
+ $(Q)if [ -f $(srctree)/.config ]; then \
echo " $(srctree) is not clean, please run 'make mrproper'";\
echo " in the '$(srctree)' directory.";\
/bin/false; \
@@ -769,7 +798,8 @@ endif
# prepare1 creates a makefile if using a separate output directory
prepare1: prepare2 outputmakefile
-prepare0: prepare1 include/linux/version.h include/asm include/config/MARKER
+prepare0: prepare1 include/linux/version.h include/asm \
+ include/config/MARKER
ifneq ($(KBUILD_MODULES),)
$(Q)rm -rf $(MODVERDIR)
$(Q)mkdir -p $(MODVERDIR)
@@ -875,7 +905,7 @@ modules_install: _modinst_ _modinst_post
.PHONY: _modinst_
_modinst_:
- @if [ -z "`$(DEPMOD) -V | grep module-init-tools`" ]; then \
+ @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
echo "Warning: you may need to install module-init-tools"; \
echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
sleep 1; \
@@ -1159,37 +1189,49 @@ else
__srctree = $(srctree)/
endif
+ALLSOURCE_ARCHS := $(ARCH)
+
define all-sources
( find $(__srctree) $(RCS_FIND_IGNORE) \
\( -name include -o -name arch \) -prune -o \
-name '*.[chS]' -print; \
- find $(__srctree)arch/$(ARCH) $(RCS_FIND_IGNORE) \
- -name '*.[chS]' -print; \
+ for ARCH in $(ALLSOURCE_ARCHS) ; do \
+ find $(__srctree)arch/$${ARCH} $(RCS_FIND_IGNORE) \
+ -name '*.[chS]' -print; \
+ done ; \
find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print; \
find $(__srctree)include $(RCS_FIND_IGNORE) \
\( -name config -o -name 'asm-*' \) -prune \
-o -name '*.[chS]' -print; \
- find $(__srctree)include/asm-$(ARCH) $(RCS_FIND_IGNORE) \
- -name '*.[chS]' -print; \
+ for ARCH in $(ALLSOURCE_ARCHS) ; do \
+ find $(__srctree)include/asm-$${ARCH} $(RCS_FIND_IGNORE) \
+ -name '*.[chS]' -print; \
+ done ; \
find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print )
endef
quiet_cmd_cscope-file = FILELST cscope.files
- cmd_cscope-file = $(all-sources) > cscope.files
+ cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files
quiet_cmd_cscope = MAKE cscope.out
- cmd_cscope = cscope -k -b -q
+ cmd_cscope = cscope -b
cscope: FORCE
$(call cmd,cscope-file)
$(call cmd,cscope)
quiet_cmd_TAGS = MAKE $@
-cmd_TAGS = $(all-sources) | etags -
+define cmd_TAGS
+ rm -f $@; \
+ ETAGSF=`etags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL --extra=+f"`; \
+ $(all-sources) | xargs etags $$ETAGSF -a
+endef
+
+TAGS: FORCE
+ $(call cmd,TAGS)
-# Exuberant ctags works better with -I
quiet_cmd_tags = MAKE $@
define cmd_tags
@@ -1198,9 +1240,6 @@ define cmd_tags
$(all-sources) | xargs ctags $$CTAGSF -a
endef
-TAGS: FORCE
- $(call cmd,TAGS)
-
tags: FORCE
$(call cmd,tags)
@@ -1268,82 +1307,11 @@ ifneq ($(cmd_files),)
include $(cmd_files)
endif
-# Execute command and generate cmd file
-if_changed = $(if $(strip $? \
- $(filter-out $(cmd_$(1)),$(cmd_$@))\
- $(filter-out $(cmd_$@),$(cmd_$(1)))),\
- @set -e; \
- $(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';) \
- $(cmd_$(1)); \
- echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd)
-
-
-# execute the command and also postprocess generated .d dependencies
-# file
-if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
- $(filter-out $(cmd_$(1)),$(cmd_$@))\
- $(filter-out $(cmd_$@),$(cmd_$(1)))),\
- $(Q)set -e; \
- $(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';) \
- $(cmd_$(1)); \
- scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
- rm -f $(depfile); \
- mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
-
-# Usage: $(call if_changed_rule,foo)
-# will check if $(cmd_foo) changed, or any of the prequisites changed,
-# and if so will execute $(rule_foo)
-
-if_changed_rule = $(if $(strip $? \
- $(filter-out $(cmd_$(1)),$(cmd_$(@F)))\
- $(filter-out $(cmd_$(@F)),$(cmd_$(1)))),\
- $(Q)$(rule_$(1)))
-
-# If quiet is set, only print short version of command
-
-cmd = @$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))' &&) $(cmd_$(1))
-
-# filechk is used to check if the content of a generated file is updated.
-# Sample usage:
-# define filechk_sample
-# echo $KERNELRELEASE
-# endef
-# version.h : Makefile
-# $(call filechk,sample)
-# The rule defined shall write to stdout the content of the new file.
-# The existing file will be compared with the new one.
-# - If no file exist it is created
-# - If the content differ the new file is used
-# - If they are equal no change, and no timestamp update
-
-define filechk
- @set -e; \
- echo ' CHK $@'; \
- mkdir -p $(dir $@); \
- $(filechk_$(1)) < $< > $@.tmp; \
- if [ -r $@ ] && cmp -s $@ $@.tmp; then \
- rm -f $@.tmp; \
- else \
- echo ' UPD $@'; \
- mv -f $@.tmp $@; \
- fi
-endef
-
-# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=dir
-# Usage:
-# $(Q)$(MAKE) $(build)=dir
-build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
-
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
-# $(call descend,<dir>,<target>)
-# Recursively call a sub-make in <dir> with target <target>
-# Usage is deprecated, because make does not see this as an invocation of make.
-descend =$(Q)$(MAKE) -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj=$(1) $(2)
-
endif # skip-makefile
FORCE:
diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile
index 97022ed0da38..7ce5e55b2401 100644
--- a/arch/m68knommu/Makefile
+++ b/arch/m68knommu/Makefile
@@ -114,7 +114,7 @@ libs-y += arch/m68knommu/lib/
prepare: include/asm-$(ARCH)/asm-offsets.h
archclean:
- $(call descend arch/$(ARCH)/boot, subdirclean)
+ $(Q)$(MAKE) $(clean)=arch/m68knommu/boot
include/asm-$(ARCH)/asm-offsets.h: arch/$(ARCH)/kernel/asm-offsets.s \
include/asm include/linux/version.h \
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index d27b82595485..b0fdaee8d8d9 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -673,7 +673,7 @@ drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/
ifdef CONFIG_LASAT
rom.bin rom.sw: vmlinux
- $(call descend,arch/mips/lasat/image,$@)
+ $(Q)$(MAKE) $(build)=arch/mips/lasat/image $@
endif
#
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 879036d4b30b..6b736364cc5b 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -408,48 +408,6 @@ config BLK_DEV_INITRD
"real" root file system, etc. See <file:Documentation/initrd.txt>
for details.
-config INITRAMFS_SOURCE
- string "Initramfs source file(s)"
- default ""
- help
- This can be either a single cpio archive with a .cpio suffix or a
- space-separated list of directories and files for building the
- initramfs image. A cpio archive should contain a filesystem archive
- to be used as an initramfs image. Directories should contain a
- filesystem layout to be included in the initramfs image. Files
- should contain entries according to the format described by the
- "usr/gen_init_cpio" program in the kernel tree.
-
- When multiple directories and files are specified then the
- initramfs image will be the aggregate of all of them.
-
- See <file:Documentation/early-userspace/README for more details.
-
- If you are not sure, leave it blank.
-
-config INITRAMFS_ROOT_UID
- int "User ID to map to 0 (user root)"
- depends on INITRAMFS_SOURCE!=""
- default "0"
- help
- This setting is only meaningful if the INITRAMFS_SOURCE is
- contains a directory. Setting this user ID (UID) to something
- other than "0" will cause all files owned by that UID to be
- owned by user root in the initial ramdisk image.
-
- If you are not sure, leave it set to "0".
-
-config INITRAMFS_ROOT_GID
- int "Group ID to map to 0 (group root)"
- depends on INITRAMFS_SOURCE!=""
- default "0"
- help
- This setting is only meaningful if the INITRAMFS_SOURCE is
- contains a directory. Setting this group ID (GID) to something
- other than "0" will cause all files owned by that GID to be
- owned by group root in the initial ramdisk image.
-
- If you are not sure, leave it set to "0".
#XXX - it makes sense to enable this only for 32-bit subarch's, not for x86_64
#for instance.
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index b3bb326ae5b6..3fa94288aa93 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -6,6 +6,9 @@
#define VMLINUX_SYMBOL(_sym_) _sym_
#endif
+/* Align . to a 8 byte boundary equals to maximum function alignment. */
+#define ALIGN_FUNCTION() . = ALIGN(8)
+
#define RODATA \
.rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \
*(.rodata) *(.rodata.*) \
@@ -79,12 +82,18 @@
VMLINUX_SYMBOL(__security_initcall_end) = .; \
}
+/* sched.text is aling to function alignment to secure we have same
+ * address even at second ld pass when generating System.map */
#define SCHED_TEXT \
+ ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__sched_text_start) = .; \
*(.sched.text) \
VMLINUX_SYMBOL(__sched_text_end) = .;
+/* spinlock.text is aling to function alignment to secure we have same
+ * address even at second ld pass when generating System.map */
#define LOCK_TEXT \
+ ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__lock_text_start) = .; \
*(.spinlock.text) \
VMLINUX_SYMBOL(__lock_text_end) = .;
diff --git a/init/Kconfig b/init/Kconfig
index 05a75c4f5ce2..d5a1a1228fab 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -77,6 +77,22 @@ config LOCALVERSION
object and source tree, in that order. Your total string can
be a maximum of 64 characters.
+config LOCALVERSION_AUTO
+ bool "Automatically append version information to the version string"
+ default y
+ help
+ This will try to automatically determine if the current tree is a
+ release tree by looking for git tags that
+ belong to the current top of tree revision.
+
+ A string of the format -gxxxxxxxx will be added to the localversion
+ if a git based tree is found. The string generated by this will be
+ appended after any matching localversion* files, and after the value
+ set in CONFIG_LOCALVERSION
+
+ Note: This requires Perl, and a git repository, but not necessarily
+ the git or cogito tools to be installed.
+
config SWAP
bool "Support for paging of anonymous memory (swap)"
depends on MMU
@@ -238,6 +254,8 @@ config CPUSETS
Say N if unsure.
+source "usr/Kconfig"
+
menuconfig EMBEDDED
bool "Configure standard kernel features (for small systems)"
help
@@ -260,8 +278,8 @@ config KALLSYMS_ALL
help
Normally kallsyms only contains the symbols of functions, for nicer
OOPS messages. Some debuggers can use kallsyms for other
- symbols too: say Y here to include all symbols, and you
- don't care about adding 300k to the size of your kernel.
+ symbols too: say Y here to include all symbols, if you need them
+ and you don't care about adding 300k to the size of your kernel.
Say N.
diff --git a/init/Makefile b/init/Makefile
index 93a53fbdbe79..a2300078f2b7 100644
--- a/init/Makefile
+++ b/init/Makefile
@@ -25,4 +25,5 @@ $(obj)/version.o: include/linux/compile.h
include/linux/compile.h: FORCE
@echo ' CHK $@'
- @$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ "$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CC) $(CFLAGS)"
+ $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ \
+ "$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CONFIG_PREEMPT)" "$(CC) $(CFLAGS)"
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
new file mode 100644
index 000000000000..9087273abf91
--- /dev/null
+++ b/scripts/Kbuild.include
@@ -0,0 +1,96 @@
+####
+# kbuild: Generic definitions
+
+# Convinient variables
+comma := ,
+empty :=
+space := $(empty) $(empty)
+
+###
+# The temporary file to save gcc -MD generated dependencies must not
+# contain a comma
+depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
+
+###
+# filechk is used to check if the content of a generated file is updated.
+# Sample usage:
+# define filechk_sample
+# echo $KERNELRELEASE
+# endef
+# version.h : Makefile
+# $(call filechk,sample)
+# The rule defined shall write to stdout the content of the new file.
+# The existing file will be compared with the new one.
+# - If no file exist it is created
+# - If the content differ the new file is used
+# - If they are equal no change, and no timestamp update
+# - stdin is piped in from the first prerequisite ($<) so one has
+# to specify a valid file as first prerequisite (often the kbuild file)
+define filechk
+ $(Q)set -e; \
+ echo ' CHK $@'; \
+ mkdir -p $(dir $@); \
+ $(filechk_$(1)) < $< > $@.tmp; \
+ if [ -r $@ ] && cmp -s $@ $@.tmp; then \
+ rm -f $@.tmp; \
+ else \
+ echo ' UPD $@'; \
+ mv -f $@.tmp $@; \
+ fi
+endef
+
+###
+# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
+# Usage:
+# $(Q)$(MAKE) $(build)=dir
+build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
+
+# If quiet is set, only print short version of command
+cmd = @$(if $($(quiet)cmd_$(1)),\
+ echo ' $(subst ','\'',$($(quiet)cmd_$(1)))' &&) $(cmd_$(1))
+
+###
+# if_changed - execute command if any prerequisite is newer than
+# target, or command line has changed
+# if_changed_dep - as if_changed, but uses fixdep to reveal dependencies
+# including used config symbols
+# if_changed_rule - as if_changed but execute rule instead
+# See Documentation/kbuild/makefiles.txt for more info
+
+ifneq ($(KBUILD_NOCMDDEP),1)
+# Check if both arguments has same arguments. Result in empty string if equal
+# User may override this check using make KBUILD_NOCMDDEP=1
+arg-check = $(strip $(filter-out $(1), $(2)) $(filter-out $(2), $(1)) )
+endif
+
+# echo command. Short version is $(quiet) equals quiet, otherwise full command
+echo-cmd = $(if $($(quiet)cmd_$(1)), \
+ echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';)
+
+# function to only execute the passed command if necessary
+# >'< substitution is for echo to work, >$< substitution to preserve $ when reloading .cmd file
+# note: when using inline perl scripts [perl -e '...$$t=1;...'] in $(cmd_xxx) double $$ your perl vars
+#
+if_changed = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
+ @set -e; \
+ $(echo-cmd) \
+ $(cmd_$(1)); \
+ echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd)
+
+# execute the command and also postprocess generated .d dependencies
+# file
+if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
+ $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
+ @set -e; \
+ $(echo-cmd) \
+ $(cmd_$(1)); \
+ scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
+ rm -f $(depfile); \
+ mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
+
+# Usage: $(call if_changed_rule,foo)
+# will check if $(cmd_foo) changed, or any of the prequisites changed,
+# and if so will execute $(rule_foo)
+if_changed_rule = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
+ @set -e; \
+ $(rule_$(1)))
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 76ba6be3dfc9..506e3f3befe3 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -10,8 +10,11 @@ __build:
# Read .config if it exist, otherwise ignore
-include .config
-include $(if $(wildcard $(obj)/Kbuild), $(obj)/Kbuild, $(obj)/Makefile)
+# The filename Kbuild has precedence over Makefile
+kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
+include $(if $(wildcard $(kbuild-dir)/Kbuild), $(kbuild-dir)/Kbuild, $(kbuild-dir)/Makefile)
+include scripts/Kbuild.include
include scripts/Makefile.lib
ifdef host-progs
@@ -169,7 +172,7 @@ cmd_modversions = \
-T $(@D)/.tmp_$(@F:.o=.ver); \
rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \
else \
- mv $(@D)/.tmp_$(@F) $@; \
+ mv -f $(@D)/.tmp_$(@F) $@; \
fi;
endif
diff --git a/scripts/Makefile.clean b/scripts/Makefile.clean
index ff3e87dbf387..8974ea5fc878 100644
--- a/scripts/Makefile.clean
+++ b/scripts/Makefile.clean
@@ -7,7 +7,14 @@ src := $(obj)
.PHONY: __clean
__clean:
-include $(if $(wildcard $(obj)/Kbuild), $(obj)/Kbuild, $(obj)/Makefile)
+# Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
+# Usage:
+# $(Q)$(MAKE) $(clean)=dir
+clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+
+# The filename Kbuild has precedence over Makefile
+kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
+include $(if $(wildcard $(kbuild-dir)/Kbuild), $(kbuild-dir)/Kbuild, $(kbuild-dir)/Makefile)
# Figure out what we need to build from the various variables
# ==========================================================================
@@ -87,8 +94,3 @@ $(subdir-ymn):
# If quiet is set, only print short version of command
cmd = @$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))' &&) $(cmd_$(1))
-
-# Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
-# Usage:
-# $(Q)$(MAKE) $(clean)=dir
-clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
diff --git a/scripts/Makefile.host b/scripts/Makefile.host
index 2821a2b83bbb..2d519704b8fd 100644
--- a/scripts/Makefile.host
+++ b/scripts/Makefile.host
@@ -98,7 +98,8 @@ hostcxx_flags = -Wp,-MD,$(depfile) $(__hostcxx_flags)
# Create executable from a single .c file
# host-csingle -> Executable
quiet_cmd_host-csingle = HOSTCC $@
- cmd_host-csingle = $(HOSTCC) $(hostc_flags) $(HOST_LOADLIBES) -o $@ $<
+ cmd_host-csingle = $(HOSTCC) $(hostc_flags) -o $@ $< \
+ $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
$(host-csingle): %: %.c FORCE
$(call if_changed_dep,host-csingle)
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 7cf75cc4f849..0f81dcfd6909 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -1,13 +1,3 @@
-# ===========================================================================
-# kbuild: Generic definitions
-# ===========================================================================
-
-# Standard vars
-
-comma := ,
-empty :=
-space := $(empty) $(empty)
-
# Backward compatibility - to be removed...
extra-y += $(EXTRA_TARGETS)
# Figure out what we need to build from the various variables
@@ -84,10 +74,6 @@ multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m))
subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
obj-dirs := $(addprefix $(obj)/,$(obj-dirs))
-# The temporary file to save gcc -MD generated dependencies must not
-# contain a comma
-depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
-
# These flags are needed for modversions and compiling, so we define them here
# already
# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
@@ -179,89 +165,4 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
quiet_cmd_gzip = GZIP $@
cmd_gzip = gzip -f -9 < $< > $@
-# ===========================================================================
-# Generic stuff
-# ===========================================================================
-
-ifneq ($(KBUILD_NOCMDDEP),1)
-# Check if both arguments has same arguments. Result in empty string if equal
-# User may override this check using make KBUILD_NOCMDDEP=1
-arg-check = $(strip $(filter-out $(1), $(2)) $(filter-out $(2), $(1)) )
-
-endif
-
-# echo command. Short version is $(quiet) equals quiet, otherwise full command
-echo-cmd = $(if $($(quiet)cmd_$(1)), \
- echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';)
-
-# function to only execute the passed command if necessary
-# >'< substitution is for echo to work, >$< substitution to preserve $ when reloading .cmd file
-# note: when using inline perl scripts [perl -e '...$$t=1;...'] in $(cmd_xxx) double $$ your perl vars
-#
-if_changed = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
- @set -e; \
- $(echo-cmd) \
- $(cmd_$(1)); \
- echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd)
-
-
-# execute the command and also postprocess generated .d dependencies
-# file
-
-if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
- $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
- @set -e; \
- $(echo-cmd) \
- $(cmd_$(1)); \
- scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
- rm -f $(depfile); \
- mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
-
-# Usage: $(call if_changed_rule,foo)
-# will check if $(cmd_foo) changed, or any of the prequisites changed,
-# and if so will execute $(rule_foo)
-
-if_changed_rule = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
- @set -e; \
- $(rule_$(1)))
-
-# If quiet is set, only print short version of command
-
-cmd = @$(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))' &&) $(cmd_$(1))
-
-# $(call descend,<dir>,<target>)
-# Recursively call a sub-make in <dir> with target <target>
-# Usage is deprecated, because make do not see this as an invocation of make.
-descend =$(Q)$(MAKE) -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj=$(1) $(2)
-
-# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
-# Usage:
-# $(Q)$(MAKE) $(build)=dir
-build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
-
-# filechk is used to check if the content of a generated file is updated.
-# Sample usage:
-# define filechk_sample
-# echo $KERNELRELEASE
-# endef
-# version.h : Makefile
-# $(call filechk,sample)
-# The rule defined shall write to stdout the content of the new file.
-# The existing file will be compared with the new one.
-# - If no file exist it is created
-# - If the content differ the new file is used
-# - If they are equal no change, and no timestamp update
-
-define filechk
- $(Q)set -e; \
- echo ' CHK $@'; \
- mkdir -p $(dir $@); \
- $(filechk_$(1)) $(2) > $@.tmp; \
- if [ -r $@ ] && cmp -s $@ $@.tmp; then \
- rm -f $@.tmp; \
- else \
- echo ' UPD $@'; \
- mv -f $@.tmp $@; \
- fi
-endef
diff --git a/scripts/Makefile.modinst b/scripts/Makefile.modinst
index 85d6494e3c24..23fd1bdc25ce 100644
--- a/scripts/Makefile.modinst
+++ b/scripts/Makefile.modinst
@@ -5,7 +5,7 @@
.PHONY: __modinst
__modinst:
-include scripts/Makefile.lib
+include scripts/Kbuild.include
#
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index 94b550e21be8..0c4f3a9f2ea9 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -36,6 +36,7 @@
_modpost: __modpost
include .config
+include scripts/Kbuild.include
include scripts/Makefile.lib
symverfile := $(objtree)/Module.symvers
diff --git a/scripts/conmakehash.c b/scripts/conmakehash.c
index 93dd23f21ec9..e0c6891a9ad4 100644
--- a/scripts/conmakehash.c
+++ b/scripts/conmakehash.c
@@ -33,7 +33,7 @@ void usage(char *argv0)
int getunicode(char **p0)
{
- unsigned char *p = *p0;
+ char *p = *p0;
while (*p == ' ' || *p == '\t')
p++;
diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index d3d2e5341051..9be41a9f5aff 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -207,9 +207,9 @@ symbol_valid(struct sym_entry *s)
* move then they may get dropped in pass 2, which breaks the
* kallsyms rules.
*/
- if ((s->addr == _etext && strcmp(s->sym + offset, "_etext")) ||
- (s->addr == _einittext && strcmp(s->sym + offset, "_einittext")) ||
- (s->addr == _eextratext && strcmp(s->sym + offset, "_eextratext")))
+ if ((s->addr == _etext && strcmp((char*)s->sym + offset, "_etext")) ||
+ (s->addr == _einittext && strcmp((char*)s->sym + offset, "_einittext")) ||
+ (s->addr == _eextratext && strcmp((char*)s->sym + offset, "_eextratext")))
return 0;
}
diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h
index 8b84c42b49b5..c3d25786a64d 100644
--- a/scripts/kconfig/lkc.h
+++ b/scripts/kconfig/lkc.h
@@ -59,7 +59,7 @@ void menu_add_entry(struct symbol *sym);
void menu_end_entry(void);
void menu_add_dep(struct expr *dep);
struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep);
-void menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep);
+struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep);
void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep);
void menu_add_symbol(enum prop_type type, struct symbol *sym, struct expr *dep);
void menu_finalize(struct menu *parent);
diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index 8c59b212722d..5cfa6c405cf0 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -136,9 +136,9 @@ struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *e
return prop;
}
-void menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep)
+struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep)
{
- menu_add_prop(type, prompt, NULL, dep);
+ return menu_add_prop(type, prompt, NULL, dep);
}
void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep)
diff --git a/scripts/kconfig/zconf.tab.c_shipped b/scripts/kconfig/zconf.tab.c_shipped
index f163d8d2d9ef..ff4fcc09720e 100644
--- a/scripts/kconfig/zconf.tab.c_shipped
+++ b/scripts/kconfig/zconf.tab.c_shipped
@@ -1531,7 +1531,7 @@ yyreduce:
{
menu_add_entry(NULL);
- menu_add_prop(P_MENU, yyvsp[-1].string, NULL, NULL);
+ menu_add_prompt(P_MENU, yyvsp[-1].string, NULL);
printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno());
;}
break;
@@ -1586,7 +1586,7 @@ yyreduce:
{
menu_add_entry(NULL);
- menu_add_prop(P_COMMENT, yyvsp[-1].string, NULL, NULL);
+ menu_add_prompt(P_COMMENT, yyvsp[-1].string, NULL);
printd(DEBUG_PARSE, "%s:%d:comment\n", zconf_curname(), zconf_lineno());
;}
break;
@@ -1640,7 +1640,7 @@ yyreduce:
case 86:
{
- menu_add_prop(P_PROMPT, yyvsp[-1].string, NULL, yyvsp[0].expr);
+ menu_add_prompt(P_PROMPT, yyvsp[-1].string, yyvsp[0].expr);
;}
break;
@@ -1925,7 +1925,7 @@ void conf_parse(const char *name)
sym_init();
menu_init();
modules_sym = sym_lookup("MODULES", 0);
- rootmenu.prompt = menu_add_prop(P_MENU, "Linux Kernel Configuration", NULL, NULL);
+ rootmenu.prompt = menu_add_prompt(P_MENU, "Linux Kernel Configuration", NULL);
//zconfdebug = 1;
zconfparse();
diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y
index 54460f8d3696..e1a0f455d4a8 100644
--- a/scripts/kconfig/zconf.y
+++ b/scripts/kconfig/zconf.y
@@ -342,7 +342,7 @@ if_block:
menu: T_MENU prompt T_EOL
{
menu_add_entry(NULL);
- menu_add_prop(P_MENU, $2, NULL, NULL);
+ menu_add_prompt(P_MENU, $2, NULL);
printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno());
};
@@ -392,7 +392,7 @@ source_stmt: source
comment: T_COMMENT prompt T_EOL
{
menu_add_entry(NULL);
- menu_add_prop(P_COMMENT, $2, NULL, NULL);
+ menu_add_prompt(P_COMMENT, $2, NULL);
printd(DEBUG_PARSE, "%s:%d:comment\n", zconf_curname(), zconf_lineno());
};
@@ -443,7 +443,7 @@ prompt_stmt_opt:
/* empty */
| prompt if_expr
{
- menu_add_prop(P_PROMPT, $1, NULL, $2);
+ menu_add_prompt(P_PROMPT, $1, $2);
};
prompt: T_WORD
@@ -487,7 +487,7 @@ void conf_parse(const char *name)
sym_init();
menu_init();
modules_sym = sym_lookup("MODULES", 0);
- rootmenu.prompt = menu_add_prop(P_MENU, "Linux Kernel Configuration", NULL, NULL);
+ rootmenu.prompt = menu_add_prompt(P_MENU, "Linux Kernel Configuration", NULL);
//zconfdebug = 1;
zconfparse();
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 0835dc2a8aa9..8aaf74e64183 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1665,11 +1665,17 @@ sub xml_escape($) {
}
sub process_file($) {
- my ($file) = "$ENV{'SRCTREE'}@_";
+ my $file;
my $identifier;
my $func;
my $initial_section_counter = $section_counter;
+ if (defined($ENV{'SRCTREE'})) {
+ $file = "$ENV{'SRCTREE'}" . "/" . "@_";
+ }
+ else {
+ $file = "@_";
+ }
if (defined($source_map{$file})) {
$file = $source_map{$file};
}
diff --git a/scripts/lxdialog/dialog.h b/scripts/lxdialog/dialog.h
index c571548daa82..eb63e1bb63a3 100644
--- a/scripts/lxdialog/dialog.h
+++ b/scripts/lxdialog/dialog.h
@@ -163,7 +163,7 @@ int dialog_menu (const char *title, const char *prompt, int height, int width,
int dialog_checklist (const char *title, const char *prompt, int height,
int width, int list_height, int item_no,
const char * const * items, int flag);
-extern unsigned char dialog_input_result[];
+extern char dialog_input_result[];
int dialog_inputbox (const char *title, const char *prompt, int height,
int width, const char *init);
diff --git a/scripts/lxdialog/inputbox.c b/scripts/lxdialog/inputbox.c
index fa7bebc693b9..074d2d68bd31 100644
--- a/scripts/lxdialog/inputbox.c
+++ b/scripts/lxdialog/inputbox.c
@@ -21,7 +21,7 @@
#include "dialog.h"
-unsigned char dialog_input_result[MAX_LEN + 1];
+char dialog_input_result[MAX_LEN + 1];
/*
* Print the termination buttons
@@ -48,7 +48,7 @@ dialog_inputbox (const char *title, const char *prompt, int height, int width,
{
int i, x, y, box_y, box_x, box_width;
int input_x = 0, scroll = 0, key = 0, button = -1;
- unsigned char *instr = dialog_input_result;
+ char *instr = dialog_input_result;
WINDOW *dialog;
/* center dialog box on screen */
diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h
index 8d118d181950..d7b8a384b4a7 100755
--- a/scripts/mkcompile_h
+++ b/scripts/mkcompile_h
@@ -1,7 +1,8 @@
TARGET=$1
ARCH=$2
SMP=$3
-CC=$4
+PREEMPT=$4
+CC=$5
# If compile.h exists already and we don't own autoconf.h
# (i.e. we're not the same user who did make *config), don't
@@ -26,8 +27,10 @@ fi
UTS_VERSION="#$VERSION"
-if [ -n "$SMP" ] ; then UTS_VERSION="$UTS_VERSION SMP"; fi
-UTS_VERSION="$UTS_VERSION `LC_ALL=C LANG=C date`"
+CONFIG_FLAGS=""
+if [ -n "$SMP" ] ; then CONFIG_FLAGS="SMP"; fi
+if [ -n "$PREEMPT" ] ; then CONFIG_FLAGS="$CONFIG_FLAGS PREEMPT"; fi
+UTS_VERSION="$UTS_VERSION $CONFIG_FLAGS `LC_ALL=C LANG=C date`"
# Truncate to maximum length
@@ -37,7 +40,8 @@ UTS_TRUNCATE="sed -e s/\(.\{1,$UTS_LEN\}\).*/\1/"
# Generate a temporary compile.h
( echo /\* This file is auto generated, version $VERSION \*/
-
+ if [ -n "$CONFIG_FLAGS" ] ; then echo "/* $CONFIG_FLAGS */"; fi
+
echo \#define UTS_MACHINE \"$ARCH\"
echo \#define UTS_VERSION \"`echo $UTS_VERSION | $UTS_TRUNCATE`\"
diff --git a/scripts/mod/sumversion.c b/scripts/mod/sumversion.c
index 1112347245c0..43271a1ca01e 100644
--- a/scripts/mod/sumversion.c
+++ b/scripts/mod/sumversion.c
@@ -252,9 +252,9 @@ static int parse_comment(const char *file, unsigned long len)
}
/* FIXME: Handle .s files differently (eg. # starts comments) --RR */
-static int parse_file(const signed char *fname, struct md4_ctx *md)
+static int parse_file(const char *fname, struct md4_ctx *md)
{
- signed char *file;
+ char *file;
unsigned long i, len;
file = grab_file(fname, &len);
@@ -332,7 +332,7 @@ static int parse_source_files(const char *objfile, struct md4_ctx *md)
Sum all files in the same dir or subdirs.
*/
while ((line = get_next_line(&pos, file, flen)) != NULL) {
- signed char* p = line;
+ char* p = line;
if (strncmp(line, "deps_", sizeof("deps_")-1) == 0) {
check_files = 1;
continue;
@@ -458,7 +458,7 @@ out:
close(fd);
}
-static int strip_rcs_crap(signed char *version)
+static int strip_rcs_crap(char *version)
{
unsigned int len, full_len;
diff --git a/scripts/package/Makefile b/scripts/package/Makefile
index 3b1f2eff2584..f3e7e8e4a500 100644
--- a/scripts/package/Makefile
+++ b/scripts/package/Makefile
@@ -59,7 +59,7 @@ $(objtree)/binkernel.spec: $(MKSPEC) $(srctree)/Makefile
$(CONFIG_SHELL) $(MKSPEC) prebuilt > $@
binrpm-pkg: $(objtree)/binkernel.spec
- $(MAKE)
+ $(MAKE) KBUILD_SRC=
set -e; \
$(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version
set -e; \
@@ -74,16 +74,30 @@ clean-files += $(objtree)/binkernel.spec
#
.PHONY: deb-pkg
deb-pkg:
- $(MAKE)
+ $(MAKE) KBUILD_SRC=
$(CONFIG_SHELL) $(srctree)/scripts/package/builddeb
clean-dirs += $(objtree)/debian/
+# tarball targets
+# ---------------------------------------------------------------------------
+.PHONY: tar%pkg
+tar%pkg:
+ $(MAKE)
+ $(CONFIG_SHELL) $(srctree)/scripts/package/buildtar $@
+
+clean-dirs += $(objtree)/tar-install/
+
+
# Help text displayed when executing 'make help'
# ---------------------------------------------------------------------------
help:
- @echo ' rpm-pkg - Build the kernel as an RPM package'
- @echo ' binrpm-pkg - Build an rpm package containing the compiled kernel & modules'
- @echo ' deb-pkg - Build the kernel as an deb package'
+ @echo ' rpm-pkg - Build the kernel as an RPM package'
+ @echo ' binrpm-pkg - Build an rpm package containing the compiled kernel'
+ @echo ' and modules'
+ @echo ' deb-pkg - Build the kernel as an deb package'
+ @echo ' tar-pkg - Build the kernel as an uncompressed tarball'
+ @echo ' targz-pkg - Build the kernel as a gzip compressed tarball'
+ @echo ' tarbz2-pkg - Build the kernel as a bzip2 compressed tarball'
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index c279b6310f02..6edb29f2b4a6 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -14,18 +14,38 @@ set -e
# Some variables and settings used throughout the script
version=$KERNELRELEASE
tmpdir="$objtree/debian/tmp"
+packagename=linux-$version
+
+if [ "$ARCH" == "um" ] ; then
+ packagename=user-mode-linux-$version
+fi
# Setup the directory structure
rm -rf "$tmpdir"
mkdir -p "$tmpdir/DEBIAN" "$tmpdir/lib" "$tmpdir/boot"
+if [ "$ARCH" == "um" ] ; then
+ mkdir -p "$tmpdir/usr/lib/uml/modules/$version" "$tmpdir/usr/share/doc/$packagename" "$tmpdir/usr/bin"
+fi
# Build and install the kernel
-cp System.map "$tmpdir/boot/System.map-$version"
-cp .config "$tmpdir/boot/config-$version"
-cp $KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version"
+if [ "$ARCH" == "um" ] ; then
+ $MAKE linux
+ cp System.map "$tmpdir/usr/lib/uml/modules/$version/System.map"
+ cp .config "$tmpdir/usr/share/doc/$packagename/config"
+ gzip "$tmpdir/usr/share/doc/$packagename/config"
+ cp $KBUILD_IMAGE "$tmpdir/usr/bin/linux-$version"
+else
+ cp System.map "$tmpdir/boot/System.map-$version"
+ cp .config "$tmpdir/boot/config-$version"
+ cp $KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version"
+fi
if grep -q '^CONFIG_MODULES=y' .config ; then
- INSTALL_MOD_PATH="$tmpdir" make modules_install
+ INSTALL_MOD_PATH="$tmpdir" make KBUILD_SRC= modules_install
+ if [ "$ARCH" == "um" ] ; then
+ mv "$tmpdir/lib/modules/$version"/* "$tmpdir/usr/lib/uml/modules/$version/"
+ rmdir "$tmpdir/lib/modules/$version"
+ fi
fi
# Install the maintainer scripts
@@ -53,6 +73,8 @@ linux ($version) unstable; urgency=low
EOF
# Generate a control file
+if [ "$ARCH" == "um" ]; then
+
cat <<EOF > debian/control
Source: linux
Section: base
@@ -60,12 +82,34 @@ Priority: optional
Maintainer: $name
Standards-Version: 3.6.1
-Package: linux-$version
+Package: $packagename
+Architecture: any
+Description: User Mode Linux kernel, version $version
+ User-mode Linux is a port of the Linux kernel to its own system call
+ interface. It provides a kind of virtual machine, which runs Linux
+ as a user process under another Linux kernel. This is useful for
+ kernel development, sandboxes, jails, experimentation, and
+ many other things.
+ .
+ This package contains the Linux kernel, modules and corresponding other
+ files version $version
+EOF
+
+else
+cat <<EOF > debian/control
+Source: linux
+Section: base
+Priority: optional
+Maintainer: $name
+Standards-Version: 3.6.1
+
+Package: $packagename
Architecture: any
Description: Linux kernel, version $version
This package contains the Linux kernel, modules and corresponding other
- files version $version.
+ files version $version
EOF
+fi
# Fix some ownership and permissions
chown -R root:root "$tmpdir"
diff --git a/scripts/package/buildtar b/scripts/package/buildtar
new file mode 100644
index 000000000000..d8fffe6f8906
--- /dev/null
+++ b/scripts/package/buildtar
@@ -0,0 +1,111 @@
+#!/bin/sh
+
+#
+# buildtar 0.0.3
+#
+# (C) 2004-2005 by Jan-Benedict Glaw <jbglaw@lug-owl.de>
+#
+# This script is used to compile a tarball from the currently
+# prepared kernel. Based upon the builddeb script from
+# Wichert Akkerman <wichert@wiggy.net>.
+#
+
+set -e
+
+#
+# Some variables and settings used throughout the script
+#
+version="${VERSION}.${PATCHLEVEL}.${SUBLEVEL}${EXTRAVERSION}${EXTRANAME}"
+tmpdir="${objtree}/tar-install"
+tarball="${objtree}/linux-${version}.tar"
+
+
+#
+# Figure out how to compress, if requested at all
+#
+case "${1}" in
+ tar-pkg)
+ compress="cat"
+ file_ext=""
+ ;;
+ targz-pkg)
+ compress="gzip -c9"
+ file_ext=".gz"
+ ;;
+ tarbz2-pkg)
+ compress="bzip2 -c9"
+ file_ext=".bz2"
+ ;;
+ *)
+ echo "Unknown tarball target \"${1}\" requested, please add it to ${0}." >&2
+ exit 1
+ ;;
+esac
+
+
+#
+# Clean-up and re-create the temporary directory
+#
+rm -rf -- "${tmpdir}"
+mkdir -p -- "${tmpdir}/boot"
+
+
+#
+# Try to install modules
+#
+if ! make INSTALL_MOD_PATH="${tmpdir}" modules_install; then
+ echo "" >&2
+ echo "Ignoring error at module_install time, since that could be" >&2
+ echo "a result of missing local modutils/module-init-tools," >&2
+ echo "or you just didn't compile in module support at all..." >&2
+ echo "" >&2
+fi
+
+
+#
+# Install basic kernel files
+#
+cp -v -- System.map "${tmpdir}/boot/System.map-${version}"
+cp -v -- .config "${tmpdir}/boot/config-${version}"
+cp -v -- vmlinux "${tmpdir}/boot/vmlinux-${version}"
+
+
+#
+# Install arch-specific kernel image(s)
+#
+case "${ARCH}" in
+ i386)
+ [ -f arch/i386/boot/bzImage ] && cp -v -- arch/i386/boot/bzImage "${tmpdir}/boot/vmlinuz-${version}"
+ ;;
+ alpha)
+ [ -f arch/alpha/boot/vmlinux.gz ] && cp -v -- arch/alpha/boot/vmlinux.gz "${tmpdir}/boot/vmlinuz-${version}"
+ ;;
+ vax)
+ [ -f vmlinux.SYS ] && cp -v -- vmlinux.SYS "${tmpdir}/boot/vmlinux-${version}.SYS"
+ [ -f vmlinux.dsk ] && cp -v -- vmlinux.dsk "${tmpdir}/boot/vmlinux-${version}.dsk"
+ ;;
+ *)
+ [ -f "${KBUILD_IMAGE}" ] && cp -v -- "${KBUILD_IMAGE}" "${tmpdir}/boot/vmlinux-kbuild-${version}"
+ echo "" >&2
+ echo '** ** ** WARNING ** ** **' >&2
+ echo "" >&2
+ echo "Your architecture did not define any architecture-dependant files" >&2
+ echo "to be placed into the tarball. Please add those to ${0} ..." >&2
+ echo "" >&2
+ sleep 5
+ ;;
+esac
+
+
+#
+# Create the tarball
+#
+(
+ cd "${tmpdir}"
+ tar cf - . | ${compress} > "${tarball}${file_ext}"
+)
+
+echo "Tarball successfully created in ${tarball}${file_ext}"
+
+exit 0
+
diff --git a/scripts/package/mkspec b/scripts/package/mkspec
index 6e7a58f145ad..0b1038737548 100755
--- a/scripts/package/mkspec
+++ b/scripts/package/mkspec
@@ -62,10 +62,19 @@ echo ""
fi
echo "%install"
+echo "%ifarch ia64"
+echo 'mkdir -p $RPM_BUILD_ROOT/boot/efi $RPM_BUILD_ROOT/lib $RPM_BUILD_ROOT/lib/modules'
+echo "%else"
echo 'mkdir -p $RPM_BUILD_ROOT/boot $RPM_BUILD_ROOT/lib $RPM_BUILD_ROOT/lib/modules'
+echo "%endif"
echo 'INSTALL_MOD_PATH=$RPM_BUILD_ROOT make %{_smp_mflags} modules_install'
+echo "%ifarch ia64"
+echo 'cp $KBUILD_IMAGE $RPM_BUILD_ROOT'"/boot/efi/vmlinuz-$KERNELRELEASE"
+echo 'ln -s '"efi/vmlinuz-$KERNELRELEASE" '$RPM_BUILD_ROOT'"/boot/"
+echo "%else"
echo 'cp $KBUILD_IMAGE $RPM_BUILD_ROOT'"/boot/vmlinuz-$KERNELRELEASE"
+echo "%endif"
echo 'cp System.map $RPM_BUILD_ROOT'"/boot/System.map-$KERNELRELEASE"
diff --git a/scripts/reference_discarded.pl b/scripts/reference_discarded.pl
index d5cabb81bd1b..f04f62736851 100644
--- a/scripts/reference_discarded.pl
+++ b/scripts/reference_discarded.pl
@@ -96,6 +96,7 @@ foreach $object (keys(%object)) {
$from !~ /\.debug_ranges$/ &&
$from !~ /\.debug_line$/ &&
$from !~ /\.debug_frame$/ &&
+ $from !~ /\.debug_loc$/ &&
$from !~ /\.exitcall\.exit$/ &&
$from !~ /\.eh_frame$/ &&
$from !~ /\.stab$/)) {
diff --git a/scripts/reference_init.pl b/scripts/reference_init.pl
index 9a2408453869..7f6960b175a2 100644
--- a/scripts/reference_init.pl
+++ b/scripts/reference_init.pl
@@ -98,6 +98,7 @@ foreach $object (sort(keys(%object))) {
$from !~ /\.pdr$/ &&
$from !~ /\__param$/ &&
$from !~ /\.altinstructions/ &&
+ $from !~ /\.eh_frame/ &&
$from !~ /\.debug_/)) {
printf("Error: %s %s refers to %s\n", $object, $from, $line);
}
diff --git a/scripts/setlocalversion b/scripts/setlocalversion
new file mode 100644
index 000000000000..7c805c8fccd2
--- /dev/null
+++ b/scripts/setlocalversion
@@ -0,0 +1,56 @@
+#!/usr/bin/perl
+# Copyright 2004 - Ryan Anderson <ryan@michonline.com> GPL v2
+
+use strict;
+use warnings;
+use Digest::MD5;
+require 5.006;
+
+if (@ARGV != 1) {
+ print <<EOT;
+Usage: setlocalversion <srctree>
+EOT
+ exit(1);
+}
+
+my ($srctree) = @ARGV;
+chdir($srctree);
+
+my @LOCALVERSIONS = ();
+
+# We are going to use the following commands to try and determine if this
+# repository is at a Version boundary (i.e, 2.6.10 vs 2.6.10 + some patches) We
+# currently assume that all meaningful version boundaries are marked by a tag.
+# We don't care what the tag is, just that something exists.
+
+# Git/Cogito store the top-of-tree "commit" in .git/HEAD
+# A list of known tags sits in .git/refs/tags/
+#
+# The simple trick here is to just compare the two of these, and if we get a
+# match, return nothing, otherwise, return a subset of the SHA-1 hash in
+# .git/HEAD
+
+sub do_git_checks {
+ open(H,"<.git/HEAD") or return;
+ my $head = <H>;
+ chomp $head;
+ close(H);
+
+ opendir(D,".git/refs/tags") or return;
+ foreach my $tagfile (grep !/^\.{1,2}$/, readdir(D)) {
+ open(F,"<.git/refs/tags/" . $tagfile) or return;
+ my $tag = <F>;
+ chomp $tag;
+ close(F);
+ return if ($tag eq $head);
+ }
+ closedir(D);
+
+ push @LOCALVERSIONS, "g" . substr($head,0,8);
+}
+
+if ( -d ".git") {
+ do_git_checks();
+}
+
+printf "-%s\n", join("-",@LOCALVERSIONS) if (scalar @LOCALVERSIONS > 0);
diff --git a/usr/Kconfig b/usr/Kconfig
new file mode 100644
index 000000000000..07727f3c7cea
--- /dev/null
+++ b/usr/Kconfig
@@ -0,0 +1,46 @@
+#
+# Configuration for initramfs
+#
+
+config INITRAMFS_SOURCE
+ string "Initramfs source file(s)"
+ default ""
+ help
+ This can be either a single cpio archive with a .cpio suffix or a
+ space-separated list of directories and files for building the
+ initramfs image. A cpio archive should contain a filesystem archive
+ to be used as an initramfs image. Directories should contain a
+ filesystem layout to be included in the initramfs image. Files
+ should contain entries according to the format described by the
+ "usr/gen_init_cpio" program in the kernel tree.
+
+ When multiple directories and files are specified then the
+ initramfs image will be the aggregate of all of them.
+
+ See <file:Documentation/early-userspace/README for more details.
+
+ If you are not sure, leave it blank.
+
+config INITRAMFS_ROOT_UID
+ int "User ID to map to 0 (user root)"
+ depends on INITRAMFS_SOURCE!=""
+ default "0"
+ help
+ This setting is only meaningful if the INITRAMFS_SOURCE is
+ contains a directory. Setting this user ID (UID) to something
+ other than "0" will cause all files owned by that UID to be
+ owned by user root in the initial ramdisk image.
+
+ If you are not sure, leave it set to "0".
+
+config INITRAMFS_ROOT_GID
+ int "Group ID to map to 0 (group root)"
+ depends on INITRAMFS_SOURCE!=""
+ default "0"
+ help
+ This setting is only meaningful if the INITRAMFS_SOURCE is
+ contains a directory. Setting this group ID (GID) to something
+ other than "0" will cause all files owned by that GID to be
+ owned by group root in the initial ramdisk image.
+
+ If you are not sure, leave it set to "0".
diff --git a/usr/Makefile b/usr/Makefile
index 248d5551029d..e2129cb570bb 100644
--- a/usr/Makefile
+++ b/usr/Makefile
@@ -27,7 +27,7 @@ quotefixed_initramfs_source := $(shell echo $(CONFIG_INITRAMFS_SOURCE))
filechk_initramfs_list = $(CONFIG_SHELL) \
$(srctree)/scripts/gen_initramfs_list.sh $(gen_initramfs_args) $(quotefixed_initramfs_source)
-$(obj)/initramfs_list: FORCE
+$(obj)/initramfs_list: $(obj)/Makefile FORCE
$(call filechk,initramfs_list)
quiet_cmd_cpio = CPIO $@