diff options
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/palmas-pmic.txt | 12 | ||||
| -rw-r--r-- | drivers/regulator/palmas-regulator.c | 164 |
2 files changed, 167 insertions, 9 deletions
diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt index 875639ae0606..42e6b6bc48ff 100644 --- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt +++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt @@ -26,11 +26,17 @@ Optional nodes: For ti,palmas-pmic - smps12, smps123, smps3 depending on OTP, smps45, smps457, smps7 depending on variant, smps6, smps[8-9], - smps10_out2, smps10_out1, do[1-9], ldoln, ldousb. + smps10_out2, smps10_out1, ldo[1-9], ldoln, ldousb. Optional sub-node properties: ti,warm-reset - maintain voltage during warm reset(boolean) - ti,roof-floor - control voltage selection by pin(boolean) + ti,roof-floor - This takes as optional argument on platform supporting + the rail from desired external control. If there is no argument then + it will be assume that it is controlled by NSLEEP pin. + The valid value for external pins are: + ENABLE1 then 1, + ENABLE2 then 2 or + NSLEEP then 3. ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto, 2 - eco, 3 - forced pwm ti,smps-range - OTP has the wrong range set for the hardware so override @@ -61,7 +67,7 @@ pmic { regulator-always-on; regulator-boot-on; ti,warm-reset; - ti,roof-floor; + ti,roof-floor = <1>; /* ENABLE1 control */ ti,mode-sleep = <0>; ti,smps-range = <1>; }; diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 488dfe7ce9a6..3c08e1b5b289 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -33,6 +33,7 @@ struct regs_info { u8 vsel_addr; u8 ctrl_addr; u8 tstep_addr; + int sleep_id; }; static const struct regs_info palmas_regs_info[] = { @@ -42,6 +43,7 @@ static const struct regs_info palmas_regs_info[] = { .vsel_addr = PALMAS_SMPS12_VOLTAGE, .ctrl_addr = PALMAS_SMPS12_CTRL, .tstep_addr = PALMAS_SMPS12_TSTEP, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS12, }, { .name = "SMPS123", @@ -49,12 +51,14 @@ static const struct regs_info palmas_regs_info[] = { .vsel_addr = PALMAS_SMPS12_VOLTAGE, .ctrl_addr = PALMAS_SMPS12_CTRL, .tstep_addr = PALMAS_SMPS12_TSTEP, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS12, }, { .name = "SMPS3", .sname = "smps3-in", .vsel_addr = PALMAS_SMPS3_VOLTAGE, .ctrl_addr = PALMAS_SMPS3_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS3, }, { .name = "SMPS45", @@ -62,6 +66,7 @@ static const struct regs_info palmas_regs_info[] = { .vsel_addr = PALMAS_SMPS45_VOLTAGE, .ctrl_addr = PALMAS_SMPS45_CTRL, .tstep_addr = PALMAS_SMPS45_TSTEP, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS45, }, { .name = "SMPS457", @@ -69,6 +74,7 @@ static const struct regs_info palmas_regs_info[] = { .vsel_addr = PALMAS_SMPS45_VOLTAGE, .ctrl_addr = PALMAS_SMPS45_CTRL, .tstep_addr = PALMAS_SMPS45_TSTEP, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS45, }, { .name = "SMPS6", @@ -76,12 +82,14 @@ static const struct regs_info palmas_regs_info[] = { .vsel_addr = PALMAS_SMPS6_VOLTAGE, .ctrl_addr = PALMAS_SMPS6_CTRL, .tstep_addr = PALMAS_SMPS6_TSTEP, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS6, }, { .name = "SMPS7", .sname = "smps7-in", .vsel_addr = PALMAS_SMPS7_VOLTAGE, .ctrl_addr = PALMAS_SMPS7_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS7, }, { .name = "SMPS8", @@ -89,108 +97,128 @@ static const struct regs_info palmas_regs_info[] = { .vsel_addr = PALMAS_SMPS8_VOLTAGE, .ctrl_addr = PALMAS_SMPS8_CTRL, .tstep_addr = PALMAS_SMPS8_TSTEP, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS8, }, { .name = "SMPS9", .sname = "smps9-in", .vsel_addr = PALMAS_SMPS9_VOLTAGE, .ctrl_addr = PALMAS_SMPS9_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS9, }, { .name = "SMPS10_OUT2", .sname = "smps10-in", .ctrl_addr = PALMAS_SMPS10_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS10, }, { .name = "SMPS10_OUT1", .sname = "smps10-out2", .ctrl_addr = PALMAS_SMPS10_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS10, }, { .name = "LDO1", .sname = "ldo1-in", .vsel_addr = PALMAS_LDO1_VOLTAGE, .ctrl_addr = PALMAS_LDO1_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO1, }, { .name = "LDO2", .sname = "ldo2-in", .vsel_addr = PALMAS_LDO2_VOLTAGE, .ctrl_addr = PALMAS_LDO2_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO2, }, { .name = "LDO3", .sname = "ldo3-in", .vsel_addr = PALMAS_LDO3_VOLTAGE, .ctrl_addr = PALMAS_LDO3_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO3, }, { .name = "LDO4", .sname = "ldo4-in", .vsel_addr = PALMAS_LDO4_VOLTAGE, .ctrl_addr = PALMAS_LDO4_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO4, }, { .name = "LDO5", .sname = "ldo5-in", .vsel_addr = PALMAS_LDO5_VOLTAGE, .ctrl_addr = PALMAS_LDO5_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO5, }, { .name = "LDO6", .sname = "ldo6-in", .vsel_addr = PALMAS_LDO6_VOLTAGE, .ctrl_addr = PALMAS_LDO6_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO6, }, { .name = "LDO7", .sname = "ldo7-in", .vsel_addr = PALMAS_LDO7_VOLTAGE, .ctrl_addr = PALMAS_LDO7_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO7, }, { .name = "LDO8", .sname = "ldo8-in", .vsel_addr = PALMAS_LDO8_VOLTAGE, .ctrl_addr = PALMAS_LDO8_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO8, }, { .name = "LDO9", .sname = "ldo9-in", .vsel_addr = PALMAS_LDO9_VOLTAGE, .ctrl_addr = PALMAS_LDO9_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO9, }, { .name = "LDOLN", .sname = "ldoln-in", .vsel_addr = PALMAS_LDOLN_VOLTAGE, .ctrl_addr = PALMAS_LDOLN_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDOLN, }, { .name = "LDOUSB", .sname = "ldousb-in", .vsel_addr = PALMAS_LDOUSB_VOLTAGE, .ctrl_addr = PALMAS_LDOUSB_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDOUSB, }, { .name = "REGEN1", .ctrl_addr = PALMAS_REGEN1_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_REGEN1, }, { .name = "REGEN2", .ctrl_addr = PALMAS_REGEN2_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_REGEN2, }, { .name = "REGEN3", .ctrl_addr = PALMAS_REGEN3_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_REGEN3, }, { .name = "SYSEN1", .ctrl_addr = PALMAS_SYSEN1_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SYSEN1, }, { .name = "SYSEN2", .ctrl_addr = PALMAS_SYSEN2_CTRL, + .sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SYSEN2, }, }; @@ -484,6 +512,17 @@ static struct regulator_ops palmas_ops_smps = { .set_ramp_delay = palmas_smps_set_ramp_delay, }; +static struct regulator_ops palmas_ops_ext_control_smps = { + .set_mode = palmas_set_mode_smps, + .get_mode = palmas_get_mode_smps, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .list_voltage = palmas_list_voltage_smps, + .map_voltage = palmas_map_voltage_smps, + .set_voltage_time_sel = palma_smps_set_voltage_smps_time_sel, + .set_ramp_delay = palmas_smps_set_ramp_delay, +}; + static struct regulator_ops palmas_ops_smps10 = { .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, @@ -519,12 +558,37 @@ static struct regulator_ops palmas_ops_ldo = { .map_voltage = regulator_map_voltage_linear, }; +static struct regulator_ops palmas_ops_ext_control_ldo = { + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, +}; + static struct regulator_ops palmas_ops_extreg = { .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, }; +static struct regulator_ops palmas_ops_ext_control_extreg = { +}; + +static int palmas_regulator_config_external(struct palmas *palmas, int id, + struct palmas_reg_init *reg_init) +{ + int sleep_id = palmas_regs_info[id].sleep_id; + int ret; + + ret = palmas_ext_control_req_config(palmas, sleep_id, + reg_init->roof_floor, true); + if (ret < 0) + dev_err(palmas->dev, + "Ext control config for regulator %d failed %d\n", + id, ret); + return ret; +} + /* * setup the hardware based sleep configuration of the SMPS/LDO regulators * from the platform data. This is different to the software based control @@ -583,7 +647,22 @@ static int palmas_smps_init(struct palmas *palmas, int id, return ret; } + if (reg_init->roof_floor && (id != PALMAS_REG_SMPS10_OUT1) && + (id != PALMAS_REG_SMPS10_OUT2)) { + /* Enable externally controlled regulator */ + addr = palmas_regs_info[id].ctrl_addr; + ret = palmas_smps_read(palmas, addr, ®); + if (ret < 0) + return ret; + if (!(reg & PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK)) { + reg |= SMPS_CTRL_MODE_ON; + ret = palmas_smps_write(palmas, addr, reg); + if (ret < 0) + return ret; + } + return palmas_regulator_config_external(palmas, id, reg_init); + } return 0; } @@ -614,6 +693,20 @@ static int palmas_ldo_init(struct palmas *palmas, int id, if (ret) return ret; + if (reg_init->roof_floor) { + /* Enable externally controlled regulator */ + addr = palmas_regs_info[id].ctrl_addr; + ret = palmas_update_bits(palmas, PALMAS_LDO_BASE, + addr, PALMAS_LDO1_CTRL_MODE_ACTIVE, + PALMAS_LDO1_CTRL_MODE_ACTIVE); + if (ret < 0) { + dev_err(palmas->dev, + "LDO Register 0x%02x update failed %d\n", + addr, ret); + return ret; + } + return palmas_regulator_config_external(palmas, id, reg_init); + } return 0; } @@ -636,6 +729,21 @@ static int palmas_extreg_init(struct palmas *palmas, int id, addr, ret); return ret; } + + if (reg_init->roof_floor) { + /* Enable externally controlled regulator */ + addr = palmas_regs_info[id].ctrl_addr; + ret = palmas_update_bits(palmas, PALMAS_RESOURCE_BASE, + addr, PALMAS_REGEN1_CTRL_MODE_ACTIVE, + PALMAS_REGEN1_CTRL_MODE_ACTIVE); + if (ret < 0) { + dev_err(palmas->dev, + "Resource Register 0x%02x update failed %d\n", + addr, ret); + return ret; + } + return palmas_regulator_config_external(palmas, id, reg_init); + } return 0; } @@ -746,9 +854,35 @@ static void palmas_dt_to_pdata(struct device *dev, of_property_read_bool(palmas_matches[idx].of_node, "ti,warm-reset"); - pdata->reg_init[idx]->roof_floor = - of_property_read_bool(palmas_matches[idx].of_node, - "ti,roof-floor"); + ret = of_property_read_u32(palmas_matches[idx].of_node, + "ti,roof-floor", &prop); + /* EINVAL: Property not found */ + if (ret != -EINVAL) { + int econtrol; + + /* use default value, when no value is specified */ + econtrol = PALMAS_EXT_CONTROL_NSLEEP; + if (!ret) { + switch (prop) { + case 1: + econtrol = PALMAS_EXT_CONTROL_ENABLE1; + break; + case 2: + econtrol = PALMAS_EXT_CONTROL_ENABLE2; + break; + case 3: + econtrol = PALMAS_EXT_CONTROL_NSLEEP; + break; + default: + WARN_ON(1); + dev_warn(dev, + "%s: Invalid roof-floor option: %u\n", + palmas_matches[idx].name, prop); + break; + } + } + pdata->reg_init[idx]->roof_floor = econtrol; + } ret = of_property_read_u32(palmas_matches[idx].of_node, "ti,mode-sleep", &prop); @@ -875,6 +1009,8 @@ static int palmas_regulators_probe(struct platform_device *pdev) ret = palmas_smps_init(palmas, id, reg_init); if (ret) goto err_unregister_regulator; + } else { + reg_init = NULL; } /* Register the regulators */ @@ -919,7 +1055,11 @@ static int palmas_regulators_probe(struct platform_device *pdev) if (reg & PALMAS_SMPS12_VOLTAGE_RANGE) pmic->range[id] = 1; - pmic->desc[id].ops = &palmas_ops_smps; + if (reg_init && reg_init->roof_floor) + pmic->desc[id].ops = + &palmas_ops_ext_control_smps; + else + pmic->desc[id].ops = &palmas_ops_smps; pmic->desc[id].n_voltages = PALMAS_SMPS_NUM_VOLTAGES; pmic->desc[id].vsel_reg = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, @@ -962,6 +1102,10 @@ static int palmas_regulators_probe(struct platform_device *pdev) /* Start this loop from the id left from previous loop */ for (; id < PALMAS_NUM_REGS; id++) { + if (pdata && pdata->reg_init[id]) + reg_init = pdata->reg_init[id]; + else + reg_init = NULL; /* Miss out regulators which are not available due * to alternate functions. @@ -975,7 +1119,11 @@ static int palmas_regulators_probe(struct platform_device *pdev) if (id < PALMAS_REG_REGEN1) { pmic->desc[id].n_voltages = PALMAS_LDO_NUM_VOLTAGES; - pmic->desc[id].ops = &palmas_ops_ldo; + if (reg_init && reg_init->roof_floor) + pmic->desc[id].ops = + &palmas_ops_ext_control_ldo; + else + pmic->desc[id].ops = &palmas_ops_ldo; pmic->desc[id].min_uV = 900000; pmic->desc[id].uV_step = 50000; pmic->desc[id].linear_min_sel = 1; @@ -999,7 +1147,11 @@ static int palmas_regulators_probe(struct platform_device *pdev) } } else { pmic->desc[id].n_voltages = 1; - pmic->desc[id].ops = &palmas_ops_extreg; + if (reg_init && reg_init->roof_floor) + pmic->desc[id].ops = + &palmas_ops_ext_control_extreg; + else + pmic->desc[id].ops = &palmas_ops_extreg; pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_RESOURCE_BASE, palmas_regs_info[id].ctrl_addr); |