summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/ixgbe/ixgbe_82598.c67
-rw-r--r--drivers/net/ixgbe/ixgbe_type.h8
-rw-r--r--drivers/net/sky2.c14
-rw-r--r--drivers/net/sky2.h1
-rw-r--r--include/net/bluetooth/rfcomm.h12
-rw-r--r--net/bluetooth/rfcomm/core.c27
-rw-r--r--net/bluetooth/rfcomm/sock.c2
7 files changed, 119 insertions, 12 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index b9923047ce11..522c03bc1dad 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -50,6 +50,51 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
u8 *eeprom_data);
/**
+ * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
+ * @hw: pointer to the HW structure
+ *
+ * The defaults for 82598 should be in the range of 50us to 50ms,
+ * however the hardware default for these parts is 500us to 1ms which is less
+ * than the 10ms recommended by the pci-e spec. To address this we need to
+ * increase the value to either 10ms to 250ms for capability version 1 config,
+ * or 16ms to 55ms for version 2.
+ **/
+void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
+{
+ struct ixgbe_adapter *adapter = hw->back;
+ u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
+ u16 pcie_devctl2;
+
+ /* only take action if timeout value is defaulted to 0 */
+ if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK)
+ goto out;
+
+ /*
+ * if capababilities version is type 1 we can write the
+ * timeout of 10ms to 250ms through the GCR register
+ */
+ if (!(gcr & IXGBE_GCR_CAP_VER2)) {
+ gcr |= IXGBE_GCR_CMPL_TMOUT_10ms;
+ goto out;
+ }
+
+ /*
+ * for version 2 capabilities we need to write the config space
+ * directly in order to set the completion timeout value for
+ * 16ms to 55ms
+ */
+ pci_read_config_word(adapter->pdev,
+ IXGBE_PCI_DEVICE_CONTROL2, &pcie_devctl2);
+ pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms;
+ pci_write_config_word(adapter->pdev,
+ IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
+out:
+ /* disable completion timeout resend */
+ gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND;
+ IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr);
+}
+
+/**
* ixgbe_get_pcie_msix_count_82598 - Gets MSI-X vector count
* @hw: pointer to hardware structure
*
@@ -153,6 +198,26 @@ out:
}
/**
+ * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware using the generic start_hw function.
+ * Then set pcie completion timeout
+ **/
+s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
+{
+ s32 ret_val = 0;
+
+ ret_val = ixgbe_start_hw_generic(hw);
+
+ /* set the completion timeout for interface */
+ if (ret_val == 0)
+ ixgbe_set_pcie_completion_timeout(hw);
+
+ return ret_val;
+}
+
+/**
* ixgbe_get_link_capabilities_82598 - Determines link capabilities
* @hw: pointer to hardware structure
* @speed: pointer to link speed
@@ -1085,7 +1150,7 @@ out:
static struct ixgbe_mac_operations mac_ops_82598 = {
.init_hw = &ixgbe_init_hw_generic,
.reset_hw = &ixgbe_reset_hw_82598,
- .start_hw = &ixgbe_start_hw_generic,
+ .start_hw = &ixgbe_start_hw_82598,
.clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
.get_media_type = &ixgbe_get_media_type_82598,
.get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598,
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index fa87309dc087..be90eb4575f6 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -718,6 +718,12 @@
#define IXGBE_ECC_STATUS_82599 0x110E0
#define IXGBE_BAR_CTRL_82599 0x110F4
+/* PCI Express Control */
+#define IXGBE_GCR_CMPL_TMOUT_MASK 0x0000F000
+#define IXGBE_GCR_CMPL_TMOUT_10ms 0x00001000
+#define IXGBE_GCR_CMPL_TMOUT_RESEND 0x00010000
+#define IXGBE_GCR_CAP_VER2 0x00040000
+
/* Time Sync Registers */
#define IXGBE_TSYNCRXCTL 0x05188 /* Rx Time Sync Control register - RW */
#define IXGBE_TSYNCTXCTL 0x08C00 /* Tx Time Sync Control register - RW */
@@ -1521,6 +1527,7 @@
/* PCI Bus Info */
#define IXGBE_PCI_LINK_STATUS 0xB2
+#define IXGBE_PCI_DEVICE_CONTROL2 0xC8
#define IXGBE_PCI_LINK_WIDTH 0x3F0
#define IXGBE_PCI_LINK_WIDTH_1 0x10
#define IXGBE_PCI_LINK_WIDTH_2 0x20
@@ -1531,6 +1538,7 @@
#define IXGBE_PCI_LINK_SPEED_5000 0x2
#define IXGBE_PCI_HEADER_TYPE_REGISTER 0x0E
#define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80
+#define IXGBE_PCI_DEVICE_CONTROL2_16ms 0x0005
/* Number of 100 microseconds we wait for PCI Express master disable */
#define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 3550c5dcd93c..0a551d8f5d95 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1488,6 +1488,8 @@ static int sky2_up(struct net_device *dev)
sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
#endif
+ sky2->restarting = 0;
+
err = sky2_rx_start(sky2);
if (err)
goto err_out;
@@ -1500,6 +1502,9 @@ static int sky2_up(struct net_device *dev)
sky2_set_multicast(dev);
+ /* wake queue incase we are restarting */
+ netif_wake_queue(dev);
+
if (netif_msg_ifup(sky2))
printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
return 0;
@@ -1533,6 +1538,8 @@ static inline int tx_dist(unsigned tail, unsigned head)
/* Number of list elements available for next tx */
static inline int tx_avail(const struct sky2_port *sky2)
{
+ if (unlikely(sky2->restarting))
+ return 0;
return sky2->tx_pending - tx_dist(sky2->tx_cons, sky2->tx_prod);
}
@@ -1818,6 +1825,10 @@ static int sky2_down(struct net_device *dev)
if (netif_msg_ifdown(sky2))
printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
+ /* explicitly shut off tx incase we're restarting */
+ sky2->restarting = 1;
+ netif_tx_disable(dev);
+
/* Force flow control off */
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
@@ -2359,7 +2370,7 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
{
struct sky2_port *sky2 = netdev_priv(dev);
- if (netif_running(dev)) {
+ if (likely(netif_running(dev) && !sky2->restarting)) {
netif_tx_lock(dev);
sky2_tx_complete(sky2, last);
netif_tx_unlock(dev);
@@ -4283,6 +4294,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
spin_lock_init(&sky2->phy_lock);
sky2->tx_pending = TX_DEF_PENDING;
sky2->rx_pending = RX_DEF_PENDING;
+ sky2->restarting = 0;
hw->dev[port] = dev;
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index b5549c9e5107..4486b066b43f 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -2051,6 +2051,7 @@ struct sky2_port {
u8 duplex; /* DUPLEX_HALF, DUPLEX_FULL */
u8 rx_csum;
u8 wol;
+ u8 restarting;
enum flow_control flow_mode;
enum flow_control flow_status;
diff --git a/include/net/bluetooth/rfcomm.h b/include/net/bluetooth/rfcomm.h
index 80072611d26a..c274993234e3 100644
--- a/include/net/bluetooth/rfcomm.h
+++ b/include/net/bluetooth/rfcomm.h
@@ -355,7 +355,17 @@ struct rfcomm_dev_list_req {
};
int rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
+
+#ifdef CONFIG_BT_RFCOMM_TTY
int rfcomm_init_ttys(void);
void rfcomm_cleanup_ttys(void);
-
+#else
+static inline int rfcomm_init_ttys(void)
+{
+ return 0;
+}
+static inline void rfcomm_cleanup_ttys(void)
+{
+}
+#endif
#endif /* __RFCOMM_H */
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index e50566ebf9f9..94b3388c188b 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -2080,28 +2080,41 @@ static CLASS_ATTR(rfcomm_dlc, S_IRUGO, rfcomm_dlc_sysfs_show, NULL);
/* ---- Initialization ---- */
static int __init rfcomm_init(void)
{
+ int ret;
+
l2cap_load();
hci_register_cb(&rfcomm_cb);
rfcomm_thread = kthread_run(rfcomm_run, NULL, "krfcommd");
if (IS_ERR(rfcomm_thread)) {
- hci_unregister_cb(&rfcomm_cb);
- return PTR_ERR(rfcomm_thread);
+ ret = PTR_ERR(rfcomm_thread);
+ goto out_thread;
}
if (class_create_file(bt_class, &class_attr_rfcomm_dlc) < 0)
BT_ERR("Failed to create RFCOMM info file");
- rfcomm_init_sockets();
+ ret = rfcomm_init_ttys();
+ if (ret)
+ goto out_tty;
-#ifdef CONFIG_BT_RFCOMM_TTY
- rfcomm_init_ttys();
-#endif
+ ret = rfcomm_init_sockets();
+ if (ret)
+ goto out_sock;
BT_INFO("RFCOMM ver %s", VERSION);
return 0;
+
+out_sock:
+ rfcomm_cleanup_ttys();
+out_tty:
+ kthread_stop(rfcomm_thread);
+out_thread:
+ hci_unregister_cb(&rfcomm_cb);
+
+ return ret;
}
static void __exit rfcomm_exit(void)
@@ -2112,9 +2125,7 @@ static void __exit rfcomm_exit(void)
kthread_stop(rfcomm_thread);
-#ifdef CONFIG_BT_RFCOMM_TTY
rfcomm_cleanup_ttys();
-#endif
rfcomm_cleanup_sockets();
}
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 7f482784e9f7..0b85e8116859 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -1132,7 +1132,7 @@ error:
return err;
}
-void __exit rfcomm_cleanup_sockets(void)
+void rfcomm_cleanup_sockets(void)
{
class_remove_file(bt_class, &class_attr_rfcomm);
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-19 16:36:12 +0300