8 files changed, 250 insertions, 183 deletions

diff --git a/arch/x86/include/asm/iosf_mbi.h b/arch/x86/include/asm/iosf_mbi.h
index 3de0489deade..5270ff39b9af 100644
--- a/arch/x86/include/asm/iosf_mbi.h
+++ b/arch/x86/include/asm/iosf_mbi.h
@@ -105,8 +105,10 @@ int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask);
  * the PMIC bus while another driver is also accessing the PMIC bus various bad
  * things happen.
  *
- * To avoid these problems this function must be called before accessing the
- * P-Unit or the PMIC, be it through iosf_mbi* functions or through other means.
+ * Call this function before sending requests to the P-Unit which may make it
+ * access the PMIC, be it through iosf_mbi* functions or through other means.
+ * This function will block all kernel access to the PMIC I2C bus, so that the
+ * P-Unit can safely access the PMIC over the shared I2C bus.
  *
  * Note on these systems the i2c-bus driver will request a sempahore from the
  * P-Unit for exclusive access to the PMIC bus when i2c drivers are accessing
@@ -123,6 +125,31 @@ void iosf_mbi_punit_acquire(void);
 void iosf_mbi_punit_release(void);
 
 /**
+ * iosf_mbi_block_punit_i2c_access() - Block P-Unit accesses to the PMIC bus
+ *
+ * Call this function to block P-Unit access to the PMIC I2C bus, so that the
+ * kernel can safely access the PMIC over the shared I2C bus.
+ *
+ * This function acquires the P-Unit bus semaphore and notifies
+ * pmic_bus_access_notifier listeners that they may no longer access the
+ * P-Unit in a way which may cause it to access the shared I2C bus.
+ *
+ * Note this function may be called multiple times and the bus will not
+ * be released until iosf_mbi_unblock_punit_i2c_access() has been called the
+ * same amount of times.
+ *
+ * Return: Nonzero on error
+ */
+int iosf_mbi_block_punit_i2c_access(void);
+
+/*
+ * iosf_mbi_unblock_punit_i2c_access() - Release PMIC I2C bus block
+ *
+ * Release i2c access block gotten through iosf_mbi_block_punit_i2c_access().
+ */
+void iosf_mbi_unblock_punit_i2c_access(void);
+
+/**
  * iosf_mbi_register_pmic_bus_access_notifier - Register PMIC bus notifier
  *
  * This function can be used by drivers which may need to acquire P-Unit
@@ -159,14 +186,6 @@ int iosf_mbi_unregister_pmic_bus_access_notifier_unlocked(
 	struct notifier_block *nb);
 
 /**
- * iosf_mbi_call_pmic_bus_access_notifier_chain - Call PMIC bus notifier chain
- *
- * @val: action to pass into listener's notifier_call function
- * @v: data pointer to pass into listener's notifier_call function
- */
-int iosf_mbi_call_pmic_bus_access_notifier_chain(unsigned long val, void *v);
-
-/**
  * iosf_mbi_assert_punit_acquired - Assert that the P-Unit has been acquired.
  */
 void iosf_mbi_assert_punit_acquired(void);
diff --git a/arch/x86/platform/intel/iosf_mbi.c b/arch/x86/platform/intel/iosf_mbi.c
index 6f37a2137a79..2e569d10f2d0 100644
--- a/arch/x86/platform/intel/iosf_mbi.c
+++ b/arch/x86/platform/intel/iosf_mbi.c
@@ -18,24 +18,26 @@
  * enumerate the device using PCI.
  */
 
+#include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/pci.h>
 #include <linux/debugfs.h>
 #include <linux/capability.h>
+#include <linux/pm_qos.h>
 
 #include <asm/iosf_mbi.h>
 
-#define PCI_DEVICE_ID_BAYTRAIL		0x0F00
-#define PCI_DEVICE_ID_BRASWELL		0x2280
-#define PCI_DEVICE_ID_QUARK_X1000	0x0958
-#define PCI_DEVICE_ID_TANGIER		0x1170
+#define PCI_DEVICE_ID_INTEL_BAYTRAIL		0x0F00
+#define PCI_DEVICE_ID_INTEL_BRASWELL		0x2280
+#define PCI_DEVICE_ID_INTEL_QUARK_X1000		0x0958
+#define PCI_DEVICE_ID_INTEL_TANGIER		0x1170
 
 static struct pci_dev *mbi_pdev;
 static DEFINE_SPINLOCK(iosf_mbi_lock);
-static DEFINE_MUTEX(iosf_mbi_punit_mutex);
-static BLOCKING_NOTIFIER_HEAD(iosf_mbi_pmic_bus_access_notifier);
+
+/**************** Generic iosf_mbi access helpers ****************/
 
 static inline u32 iosf_mbi_form_mcr(u8 op, u8 port, u8 offset)
 {
@@ -192,6 +194,30 @@ bool iosf_mbi_available(void)
 }
 EXPORT_SYMBOL(iosf_mbi_available);
 
+/*
+ **************** P-Unit/kernel shared I2C bus arbritration ****************
+ *
+ * Some Bay Trail and Cherry Trail devices have the P-Unit and us (the kernel)
+ * share a single I2C bus to the PMIC. Below are helpers to arbitrate the
+ * accesses between the kernel and the P-Unit.
+ *
+ * See arch/x86/include/asm/iosf_mbi.h for kernel-doc text for each function.
+ */
+
+#define SEMAPHORE_TIMEOUT		500
+#define PUNIT_SEMAPHORE_BYT		0x7
+#define PUNIT_SEMAPHORE_CHT		0x10e
+#define PUNIT_SEMAPHORE_BIT		BIT(0)
+#define PUNIT_SEMAPHORE_ACQUIRE		BIT(1)
+
+static DEFINE_MUTEX(iosf_mbi_punit_mutex);
+static DEFINE_MUTEX(iosf_mbi_block_punit_i2c_access_count_mutex);
+static BLOCKING_NOTIFIER_HEAD(iosf_mbi_pmic_bus_access_notifier);
+static u32 iosf_mbi_block_punit_i2c_access_count;
+static u32 iosf_mbi_sem_address;
+static unsigned long iosf_mbi_sem_acquired;
+static struct pm_qos_request iosf_mbi_pm_qos;
+
 void iosf_mbi_punit_acquire(void)
 {
 	mutex_lock(&iosf_mbi_punit_mutex);
@@ -204,6 +230,159 @@ void iosf_mbi_punit_release(void)
 }
 EXPORT_SYMBOL(iosf_mbi_punit_release);
 
+static int iosf_mbi_get_sem(u32 *sem)
+{
+	int ret;
+
+	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
+			    iosf_mbi_sem_address, sem);
+	if (ret) {
+		dev_err(&mbi_pdev->dev, "Error P-Unit semaphore read failed\n");
+		return ret;
+	}
+
+	*sem &= PUNIT_SEMAPHORE_BIT;
+	return 0;
+}
+
+static void iosf_mbi_reset_semaphore(void)
+{
+	if (iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ,
+			    iosf_mbi_sem_address, 0, PUNIT_SEMAPHORE_BIT))
+		dev_err(&mbi_pdev->dev, "Error P-Unit semaphore reset failed\n");
+
+	pm_qos_update_request(&iosf_mbi_pm_qos, PM_QOS_DEFAULT_VALUE);
+
+	blocking_notifier_call_chain(&iosf_mbi_pmic_bus_access_notifier,
+				     MBI_PMIC_BUS_ACCESS_END, NULL);
+}
+
+/*
+ * This function blocks P-Unit accesses to the PMIC I2C bus, so that kernel
+ * I2C code, such as e.g. a fuel-gauge driver, can access it safely.
+ *
+ * This function may be called by I2C controller code while an I2C driver has
+ * already blocked P-Unit accesses because it wants them blocked over multiple
+ * i2c-transfers, for e.g. read-modify-write of an I2C client register.
+ *
+ * The P-Unit accesses already being blocked is tracked through the
+ * iosf_mbi_block_punit_i2c_access_count variable which is protected by the
+ * iosf_mbi_block_punit_i2c_access_count_mutex this mutex is hold for the
+ * entire duration of the function.
+ *
+ * If access is not blocked yet, this function takes the following steps:
+ *
+ * 1) Some code sends request to the P-Unit which make it access the PMIC
+ *    I2C bus. Testing has shown that the P-Unit does not check its internal
+ *    PMIC bus semaphore for these requests. Callers of these requests call
+ *    iosf_mbi_punit_acquire()/_release() around their P-Unit accesses, these
+ *    functions lock/unlock the iosf_mbi_punit_mutex.
+ *    As the first step we lock the iosf_mbi_punit_mutex, to wait for any in
+ *    flight requests to finish and to block any new requests.
+ *
+ * 2) Some code makes such P-Unit requests from atomic contexts where it
+ *    cannot call iosf_mbi_punit_acquire() as that may sleep.
+ *    As the second step we call a notifier chain which allows any code
+ *    needing P-Unit resources from atomic context to acquire them before
+ *    we take control over the PMIC I2C bus.
+ *
+ * 3) When CPU cores enter C6 or C7 the P-Unit needs to talk to the PMIC
+ *    if this happens while the kernel itself is accessing the PMIC I2C bus
+ *    the SoC hangs.
+ *    As the third step we call pm_qos_update_request() to disallow the CPU
+ *    to enter C6 or C7.
+ *
+ * 4) The P-Unit has a PMIC bus semaphore which we can request to stop
+ *    autonomous P-Unit tasks from accessing the PMIC I2C bus while we hold it.
+ *    As the fourth and final step we request this semaphore and wait for our
+ *    request to be acknowledged.
+ */
+int iosf_mbi_block_punit_i2c_access(void)
+{
+	unsigned long start, end;
+	int ret = 0;
+	u32 sem;
+
+	if (WARN_ON(!mbi_pdev || !iosf_mbi_sem_address))
+		return -ENXIO;
+
+	mutex_lock(&iosf_mbi_block_punit_i2c_access_count_mutex);
+
+	if (iosf_mbi_block_punit_i2c_access_count > 0)
+		goto success;
+
+	mutex_lock(&iosf_mbi_punit_mutex);
+	blocking_notifier_call_chain(&iosf_mbi_pmic_bus_access_notifier,
+				     MBI_PMIC_BUS_ACCESS_BEGIN, NULL);
+
+	/*
+	 * Disallow the CPU to enter C6 or C7 state, entering these states
+	 * requires the P-Unit to talk to the PMIC and if this happens while
+	 * we're holding the semaphore, the SoC hangs.
+	 */
+	pm_qos_update_request(&iosf_mbi_pm_qos, 0);
+
+	/* host driver writes to side band semaphore register */
+	ret = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
+			     iosf_mbi_sem_address, PUNIT_SEMAPHORE_ACQUIRE);
+	if (ret) {
+		dev_err(&mbi_pdev->dev, "Error P-Unit semaphore request failed\n");
+		goto error;
+	}
+
+	/* host driver waits for bit 0 to be set in semaphore register */
+	start = jiffies;
+	end = start + msecs_to_jiffies(SEMAPHORE_TIMEOUT);
+	do {
+		ret = iosf_mbi_get_sem(&sem);
+		if (!ret && sem) {
+			iosf_mbi_sem_acquired = jiffies;
+			dev_dbg(&mbi_pdev->dev, "P-Unit semaphore acquired after %ums\n",
+				jiffies_to_msecs(jiffies - start));
+			/*
+			 * Success, keep iosf_mbi_punit_mutex locked till
+			 * iosf_mbi_unblock_punit_i2c_access() gets called.
+			 */
+			goto success;
+		}
+
+		usleep_range(1000, 2000);
+	} while (time_before(jiffies, end));
+
+	ret = -ETIMEDOUT;
+	dev_err(&mbi_pdev->dev, "Error P-Unit semaphore timed out, resetting\n");
+error:
+	iosf_mbi_reset_semaphore();
+	mutex_unlock(&iosf_mbi_punit_mutex);
+
+	if (!iosf_mbi_get_sem(&sem))
+		dev_err(&mbi_pdev->dev, "P-Unit semaphore: %d\n", sem);
+success:
+	if (!WARN_ON(ret))
+		iosf_mbi_block_punit_i2c_access_count++;
+
+	mutex_unlock(&iosf_mbi_block_punit_i2c_access_count_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(iosf_mbi_block_punit_i2c_access);
+
+void iosf_mbi_unblock_punit_i2c_access(void)
+{
+	mutex_lock(&iosf_mbi_block_punit_i2c_access_count_mutex);
+
+	iosf_mbi_block_punit_i2c_access_count--;
+	if (iosf_mbi_block_punit_i2c_access_count == 0) {
+		iosf_mbi_reset_semaphore();
+		mutex_unlock(&iosf_mbi_punit_mutex);
+		dev_dbg(&mbi_pdev->dev, "punit semaphore held for %ums\n",
+			jiffies_to_msecs(jiffies - iosf_mbi_sem_acquired));
+	}
+
+	mutex_unlock(&iosf_mbi_block_punit_i2c_access_count_mutex);
+}
+EXPORT_SYMBOL(iosf_mbi_unblock_punit_i2c_access);
+
 int iosf_mbi_register_pmic_bus_access_notifier(struct notifier_block *nb)
 {
 	int ret;
@@ -241,19 +420,14 @@ int iosf_mbi_unregister_pmic_bus_access_notifier(struct notifier_block *nb)
 }
 EXPORT_SYMBOL(iosf_mbi_unregister_pmic_bus_access_notifier);
 
-int iosf_mbi_call_pmic_bus_access_notifier_chain(unsigned long val, void *v)
-{
-	return blocking_notifier_call_chain(
-				&iosf_mbi_pmic_bus_access_notifier, val, v);
-}
-EXPORT_SYMBOL(iosf_mbi_call_pmic_bus_access_notifier_chain);
-
 void iosf_mbi_assert_punit_acquired(void)
 {
 	WARN_ON(!mutex_is_locked(&iosf_mbi_punit_mutex));
 }
 EXPORT_SYMBOL(iosf_mbi_assert_punit_acquired);
 
+/**************** iosf_mbi debug code ****************/
+
 #ifdef CONFIG_IOSF_MBI_DEBUG
 static u32	dbg_mdr;
 static u32	dbg_mcr;
@@ -338,7 +512,7 @@ static inline void iosf_debugfs_remove(void) { }
 #endif /* CONFIG_IOSF_MBI_DEBUG */
 
 static int iosf_mbi_probe(struct pci_dev *pdev,
-			  const struct pci_device_id *unused)
+			  const struct pci_device_id *dev_id)
 {
 	int ret;
 
@@ -349,14 +523,16 @@ static int iosf_mbi_probe(struct pci_dev *pdev,
 	}
 
 	mbi_pdev = pci_dev_get(pdev);
+	iosf_mbi_sem_address = dev_id->driver_data;
+
 	return 0;
 }
 
 static const struct pci_device_id iosf_mbi_pci_ids[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_BAYTRAIL) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_BRASWELL) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_QUARK_X1000) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_TANGIER) },
+	{ PCI_DEVICE_DATA(INTEL, BAYTRAIL, PUNIT_SEMAPHORE_BYT) },
+	{ PCI_DEVICE_DATA(INTEL, BRASWELL, PUNIT_SEMAPHORE_CHT) },
+	{ PCI_DEVICE_DATA(INTEL, QUARK_X1000, 0) },
+	{ PCI_DEVICE_DATA(INTEL, TANGIER, 0) },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, iosf_mbi_pci_ids);
@@ -371,6 +547,9 @@ static int __init iosf_mbi_init(void)
 {
 	iosf_debugfs_init();
 
+	pm_qos_add_request(&iosf_mbi_pm_qos, PM_QOS_CPU_DMA_LATENCY,
+			   PM_QOS_DEFAULT_VALUE);
+
 	return pci_register_driver(&iosf_mbi_pci_driver);
 }
 
@@ -381,6 +560,8 @@ static void __exit iosf_mbi_exit(void)
 	pci_unregister_driver(&iosf_mbi_pci_driver);
 	pci_dev_put(mbi_pdev);
 	mbi_pdev = NULL;
+
+	pm_qos_remove_request(&iosf_mbi_pm_qos);
 }
 
 module_init(iosf_mbi_init);
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 365e6c1a729e..8f3a444c6ea9 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -512,7 +512,7 @@ config CRC_PMIC_OPREGION
 
 config XPOWER_PMIC_OPREGION
 	bool "ACPI operation region support for XPower AXP288 PMIC"
-	depends on MFD_AXP20X_I2C
+	depends on MFD_AXP20X_I2C && IOSF_MBI
 	help
 	  This config adds ACPI operation region support for XPower AXP288 PMIC.
 
diff --git a/drivers/acpi/pmic/intel_pmic_xpower.c b/drivers/acpi/pmic/intel_pmic_xpower.c
index aadc86db804c..2579675b7082 100644
--- a/drivers/acpi/pmic/intel_pmic_xpower.c
+++ b/drivers/acpi/pmic/intel_pmic_xpower.c
@@ -8,8 +8,9 @@
 #include <linux/acpi.h>
 #include <linux/init.h>
 #include <linux/mfd/axp20x.h>
-#include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <asm/iosf_mbi.h>
 #include "intel_pmic.h"
 
 #define XPOWER_GPADC_LOW	0x5b
@@ -172,15 +173,21 @@ static int intel_xpower_pmic_get_power(struct regmap *regmap, int reg,
 static int intel_xpower_pmic_update_power(struct regmap *regmap, int reg,
 					  int bit, bool on)
 {
-	int data;
+	int data, ret;
 
 	/* GPIO1 LDO regulator needs special handling */
 	if (reg == XPOWER_GPI1_CTRL)
 		return regmap_update_bits(regmap, reg, GPI1_LDO_MASK,
 					  on ? GPI1_LDO_ON : GPI1_LDO_OFF);
 
-	if (regmap_read(regmap, reg, &data))
-		return -EIO;
+	ret = iosf_mbi_block_punit_i2c_access();
+	if (ret)
+		return ret;
+
+	if (regmap_read(regmap, reg, &data)) {
+		ret = -EIO;
+		goto out;
+	}
 
 	if (on)
 		data |= BIT(bit);
@@ -188,9 +195,11 @@ static int intel_xpower_pmic_update_power(struct regmap *regmap, int reg,
 		data &= ~BIT(bit);
 
 	if (regmap_write(regmap, reg, data))
-		return -EIO;
+		ret = -EIO;
+out:
+	iosf_mbi_unblock_punit_i2c_access();
 
-	return 0;
+	return ret;
 }
 
 /**
diff --git a/drivers/i2c/busses/i2c-designware-baytrail.c b/drivers/i2c/busses/i2c-designware-baytrail.c
index 9ca1feaba98f..33da07d64494 100644
--- a/drivers/i2c/busses/i2c-designware-baytrail.c
+++ b/drivers/i2c/busses/i2c-designware-baytrail.c
@@ -3,141 +3,15 @@
  * Intel BayTrail PMIC I2C bus semaphore implementaion
  * Copyright (c) 2014, Intel Corporation.
  */
-#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/acpi.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
-#include <linux/pm_qos.h>
 
 #include <asm/iosf_mbi.h>
 
 #include "i2c-designware-core.h"
 
-#define SEMAPHORE_TIMEOUT	500
-#define PUNIT_SEMAPHORE		0x7
-#define PUNIT_SEMAPHORE_CHT	0x10e
-#define PUNIT_SEMAPHORE_BIT	BIT(0)
-#define PUNIT_SEMAPHORE_ACQUIRE	BIT(1)
-
-static unsigned long acquired;
-
-static u32 get_sem_addr(struct dw_i2c_dev *dev)
-{
-	if (dev->flags & MODEL_CHERRYTRAIL)
-		return PUNIT_SEMAPHORE_CHT;
-	else
-		return PUNIT_SEMAPHORE;
-}
-
-static int get_sem(struct dw_i2c_dev *dev, u32 *sem)
-{
-	u32 addr = get_sem_addr(dev);
-	u32 data;
-	int ret;
-
-	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, addr, &data);
-	if (ret) {
-		dev_err(dev->dev, "iosf failed to read punit semaphore\n");
-		return ret;
-	}
-
-	*sem = data & PUNIT_SEMAPHORE_BIT;
-
-	return 0;
-}
-
-static void reset_semaphore(struct dw_i2c_dev *dev)
-{
-	if (iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ, get_sem_addr(dev),
-			    0, PUNIT_SEMAPHORE_BIT))
-		dev_err(dev->dev, "iosf failed to reset punit semaphore during write\n");
-
-	pm_qos_update_request(&dev->pm_qos, PM_QOS_DEFAULT_VALUE);
-
-	iosf_mbi_call_pmic_bus_access_notifier_chain(MBI_PMIC_BUS_ACCESS_END,
-						     NULL);
-	iosf_mbi_punit_release();
-}
-
-static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
-{
-	u32 addr;
-	u32 sem = PUNIT_SEMAPHORE_ACQUIRE;
-	int ret;
-	unsigned long start, end;
-
-	might_sleep();
-
-	if (!dev || !dev->dev)
-		return -ENODEV;
-
-	if (!dev->release_lock)
-		return 0;
-
-	iosf_mbi_punit_acquire();
-	iosf_mbi_call_pmic_bus_access_notifier_chain(MBI_PMIC_BUS_ACCESS_BEGIN,
-						     NULL);
-
-	/*
-	 * Disallow the CPU to enter C6 or C7 state, entering these states
-	 * requires the punit to talk to the pmic and if this happens while
-	 * we're holding the semaphore, the SoC hangs.
-	 */
-	pm_qos_update_request(&dev->pm_qos, 0);
-
-	addr = get_sem_addr(dev);
-
-	/* host driver writes to side band semaphore register */
-	ret = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE, addr, sem);
-	if (ret) {
-		dev_err(dev->dev, "iosf punit semaphore request failed\n");
-		goto out;
-	}
-
-	/* host driver waits for bit 0 to be set in semaphore register */
-	start = jiffies;
-	end = start + msecs_to_jiffies(SEMAPHORE_TIMEOUT);
-	do {
-		ret = get_sem(dev, &sem);
-		if (!ret && sem) {
-			acquired = jiffies;
-			dev_dbg(dev->dev, "punit semaphore acquired after %ums\n",
-				jiffies_to_msecs(jiffies - start));
-			return 0;
-		}
-
-		usleep_range(1000, 2000);
-	} while (time_before(jiffies, end));
-
-	dev_err(dev->dev, "punit semaphore timed out, resetting\n");
-out:
-	reset_semaphore(dev);
-
-	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, addr, &sem);
-	if (ret)
-		dev_err(dev->dev, "iosf failed to read punit semaphore\n");
-	else
-		dev_err(dev->dev, "PUNIT SEM: %d\n", sem);
-
-	WARN_ON(1);
-
-	return -ETIMEDOUT;
-}
-
-static void baytrail_i2c_release(struct dw_i2c_dev *dev)
-{
-	if (!dev || !dev->dev)
-		return;
-
-	if (!dev->acquire_lock)
-		return;
-
-	reset_semaphore(dev);
-	dev_dbg(dev->dev, "punit semaphore held for %ums\n",
-		jiffies_to_msecs(jiffies - acquired));
-}
-
 int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
 {
 	acpi_status status;
@@ -162,18 +36,9 @@ int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
 		return -EPROBE_DEFER;
 
 	dev_info(dev->dev, "I2C bus managed by PUNIT\n");
-	dev->acquire_lock = baytrail_i2c_acquire;
-	dev->release_lock = baytrail_i2c_release;
+	dev->acquire_lock = iosf_mbi_block_punit_i2c_access;
+	dev->release_lock = iosf_mbi_unblock_punit_i2c_access;
 	dev->shared_with_punit = true;
 
-	pm_qos_add_request(&dev->pm_qos, PM_QOS_CPU_DMA_LATENCY,
-			   PM_QOS_DEFAULT_VALUE);
-
 	return 0;
 }
-
-void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev)
-{
-	if (dev->acquire_lock)
-		pm_qos_remove_request(&dev->pm_qos);
-}
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 36271cd75342..a4730111d290 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -269,7 +269,7 @@ int i2c_dw_acquire_lock(struct dw_i2c_dev *dev)
 	if (!dev->acquire_lock)
 		return 0;
 
-	ret = dev->acquire_lock(dev);
+	ret = dev->acquire_lock();
 	if (!ret)
 		return 0;
 
@@ -281,7 +281,7 @@ int i2c_dw_acquire_lock(struct dw_i2c_dev *dev)
 void i2c_dw_release_lock(struct dw_i2c_dev *dev)
 {
 	if (dev->release_lock)
-		dev->release_lock(dev);
+		dev->release_lock();
 }
 
 /*
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 9ec8394f4787..b4a0b2b99a78 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -10,7 +10,6 @@
  */
 
 #include <linux/i2c.h>
-#include <linux/pm_qos.h>
 
 #define DW_IC_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C |			\
 					I2C_FUNC_SMBUS_BYTE |		\
@@ -209,7 +208,6 @@
  * @fp_lcnt: fast plus LCNT value
  * @hs_hcnt: high speed HCNT value
  * @hs_lcnt: high speed LCNT value
- * @pm_qos: pm_qos_request used while holding a hardware lock on the bus
  * @acquire_lock: function to acquire a hardware lock on the bus
  * @release_lock: function to release a hardware lock on the bus
  * @shared_with_punit: true if this bus is shared with the SoCs PUNIT
@@ -263,9 +261,8 @@ struct dw_i2c_dev {
 	u16			fp_lcnt;
 	u16			hs_hcnt;
 	u16			hs_lcnt;
-	struct pm_qos_request	pm_qos;
-	int			(*acquire_lock)(struct dw_i2c_dev *dev);
-	void			(*release_lock)(struct dw_i2c_dev *dev);
+	int			(*acquire_lock)(void);
+	void			(*release_lock)(void);
 	bool			shared_with_punit;
 	void			(*disable)(struct dw_i2c_dev *dev);
 	void			(*disable_int)(struct dw_i2c_dev *dev);
@@ -322,8 +319,6 @@ static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; }
 
 #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL)
 extern int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev);
-extern void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev);
 #else
 static inline int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) { return 0; }
-static inline void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev) {}
 #endif
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 997bbb3d925f..9eaac3be1f63 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -418,8 +418,6 @@ static int dw_i2c_plat_remove(struct platform_device *pdev)
 	if (!IS_ERR_OR_NULL(dev->rst))
 		reset_control_assert(dev->rst);
 
-	i2c_dw_remove_lock_support(dev);
-
 	return 0;
 }