diff options
695 files changed, 37336 insertions, 11954 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic,scpi.txt b/Documentation/devicetree/bindings/arm/amlogic,scpi.txt index 7b9a861e9306..5ab59da052df 100644 --- a/Documentation/devicetree/bindings/arm/amlogic,scpi.txt +++ b/Documentation/devicetree/bindings/arm/amlogic,scpi.txt @@ -17,4 +17,11 @@ Required sub-node properties: - compatible : should be "amlogic,meson-gxbb-scp-shmem" for SRAM based shared memory on Amlogic GXBB SoC. +Sensor bindings for the sensors based on SCPI Message Protocol +-------------------------------------------------------------- +SCPI provides an API to access the various sensors on the SoC. + +Required properties: +- compatible : should be "amlogic,meson-gxbb-scpi-sensors". + [0] Documentation/devicetree/bindings/arm/arm,scpi.txt diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 4498292b833d..8dbc259081e4 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -91,8 +91,10 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,p230" (Meson gxl s905d) - "amlogic,p231" (Meson gxl s905d) + - "phicomm,n1" (Meson gxl s905d) - "amlogic,p241" (Meson gxl s805x) + - "libretech,aml-s805x-ac" (Meson gxl s805x) - "amlogic,p281" (Meson gxl s905w) - "oranth,tx3-mini" (Meson gxl s905w) diff --git a/Documentation/devicetree/bindings/arm/emtrion.txt b/Documentation/devicetree/bindings/arm/emtrion.txt new file mode 100644 index 000000000000..83329aefc483 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/emtrion.txt @@ -0,0 +1,12 @@ +Emtrion Devicetree Bindings +=========================== + +emCON Series: +------------- + +Required root node properties + - compatible: + - "emtrion,emcon-mx6", "fsl,imx6q"; : emCON-MX6D or emCON-MX6Q SoM + - "emtrion,emcon-mx6-avari", "fsl,imx6q"; : emCON-MX6D or emCON-MX6Q SoM on Avari Base + - "emtrion,emcon-mx6", "fsl,imx6dl"; : emCON-MX6S or emCON-MX6DL SoM + - "emtrion,emcon-mx6-avari", "fsl,imx6dl"; : emCON-MX6S or emCON-MX6DL SoM on Avari Base diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt new file mode 100644 index 000000000000..75195bee116f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt @@ -0,0 +1,23 @@ +Freescale i.MX7ULP Power Management Components +---------------------------------------------- + +The Multi-System Mode Controller (MSMC) is responsible for sequencing +the MCU into and out of all stop and run power modes. Specifically, it +monitors events to trigger transitions between power modes while +controlling the power, clocks, and memories of the MCU to achieve the +power consumption and functionality of that mode. + +The WFI or WFE instruction is used to invoke a Sleep, Deep Sleep or +Standby modes for either Cortex family. Run, Wait, and Stop are the +common terms used for the primary operating modes of Kinetis +microcontrollers. + +Required properties: +- compatible: Should be "fsl,imx7ulp-smc1". +- reg: Specifies base physical address and size of the register sets. + +Example: +smc1: smc1@40410000 { + compatible = "fsl,imx7ulp-smc1"; + reg = <0x40410000 0x1000>; +}; diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index 5074aeecd327..7fbc42484001 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -101,6 +101,10 @@ i.MX7 SabreSD Board Required root node properties: - compatible = "fsl,imx7d-sdb", "fsl,imx7d"; +i.MX7ULP Evaluation Kit +Required root node properties: + - compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp"; + Generic i.MX boards ------------------- @@ -123,6 +127,10 @@ i.MX6q generic board Required root node properties: - compatible = "fsl,imx6q"; +i.MX7ULP generic board +Required root node properties: + - compatible = "fsl,imx7ulp"; + Freescale Vybrid Platform Device Tree Bindings ---------------------------------------------- diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.txt b/Documentation/devicetree/bindings/arm/renesas,prr.txt new file mode 100644 index 000000000000..08e482e953ca --- /dev/null +++ b/Documentation/devicetree/bindings/arm/renesas,prr.txt @@ -0,0 +1,20 @@ +Renesas Product Register + +Most Renesas ARM SoCs have a Product Register or Boundary Scan ID Register that +allows to retrieve SoC product and revision information. If present, a device +node for this register should be added. + +Required properties: + - compatible: Must be one of: + "renesas,prr" + "renesas,bsid" + - reg: Base address and length of the register block. + + +Examples +-------- + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt deleted file mode 100644 index 0cc71236d639..000000000000 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ /dev/null @@ -1,240 +0,0 @@ -Rockchip platforms device tree bindings ---------------------------------------- - -- 96boards RK3399 Ficus (ROCK960 Enterprise Edition) - Required root node properties: - - compatible = "vamrs,ficus", "rockchip,rk3399"; - -- 96boards RK3399 Rock960 (ROCK960 Consumer Edition) - Required root node properties: - - compatible = "vamrs,rock960", "rockchip,rk3399"; - -- Amarula Vyasa RK3288 board - Required root node properties: - - compatible = "amarula,vyasa-rk3288", "rockchip,rk3288"; - -- Asus Tinker board - Required root node properties: - - compatible = "asus,rk3288-tinker", "rockchip,rk3288"; - -- Asus Tinker board S - Required root node properties: - - compatible = "asus,rk3288-tinker-s", "rockchip,rk3288"; - -- Kylin RK3036 board: - Required root node properties: - - compatible = "rockchip,kylin-rk3036", "rockchip,rk3036"; - -- MarsBoard RK3066 board: - Required root node properties: - - compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a"; - -- bq Curie 2 tablet: - Required root node properties: - - compatible = "mundoreader,bq-curie2", "rockchip,rk3066a"; - -- ChipSPARK Rayeager PX2 board: - Required root node properties: - - compatible = "chipspark,rayeager-px2", "rockchip,rk3066a"; - -- Radxa Rock board: - Required root node properties: - - compatible = "radxa,rock", "rockchip,rk3188"; - -- Radxa Rock2 Square board: - Required root node properties: - - compatible = "radxa,rock2-square", "rockchip,rk3288"; - -- Rikomagic MK808 v1 board: - Required root node properties: - - compatible = "rikomagic,mk808", "rockchip,rk3066a"; - -- Firefly Firefly-RK3288 board: - Required root node properties: - - compatible = "firefly,firefly-rk3288", "rockchip,rk3288"; - or - - compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288"; - -- Firefly Firefly-RK3288 Reload board: - Required root node properties: - - compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288"; - -- Firefly Firefly-RK3399 board: - Required root node properties: - - compatible = "firefly,firefly-rk3399", "rockchip,rk3399"; - -- Firefly roc-rk3328-cc board: - Required root node properties: - - compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328"; - -- Firefly ROC-RK3399-PC board: - Required root node properties: - - compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; - -- ChipSPARK PopMetal-RK3288 board: - Required root node properties: - - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; - -- Netxeon R89 board: - Required root node properties: - - compatible = "netxeon,r89", "rockchip,rk3288"; - -- GeekBuying GeekBox: - Required root node properties: - - compatible = "geekbuying,geekbox", "rockchip,rk3368"; - -- Google Bob (Asus Chromebook Flip C101PA): - Required root node properties: - compatible = "google,bob-rev13", "google,bob-rev12", - "google,bob-rev11", "google,bob-rev10", - "google,bob-rev9", "google,bob-rev8", - "google,bob-rev7", "google,bob-rev6", - "google,bob-rev5", "google,bob-rev4", - "google,bob", "google,gru", "rockchip,rk3399"; - -- Google Brain (dev-board): - Required root node properties: - - compatible = "google,veyron-brain-rev0", "google,veyron-brain", - "google,veyron", "rockchip,rk3288"; - -- Google Gru (dev-board): - Required root node properties: - - compatible = "google,gru-rev15", "google,gru-rev14", - "google,gru-rev13", "google,gru-rev12", - "google,gru-rev11", "google,gru-rev10", - "google,gru-rev9", "google,gru-rev8", - "google,gru-rev7", "google,gru-rev6", - "google,gru-rev5", "google,gru-rev4", - "google,gru-rev3", "google,gru-rev2", - "google,gru", "rockchip,rk3399"; - -- Google Jaq (Haier Chromebook 11 and more): - Required root node properties: - - compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4", - "google,veyron-jaq-rev3", "google,veyron-jaq-rev2", - "google,veyron-jaq-rev1", "google,veyron-jaq", - "google,veyron", "rockchip,rk3288"; - -- Google Jerry (Hisense Chromebook C11 and more): - Required root node properties: - - compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", - "google,veyron-jerry-rev5", "google,veyron-jerry-rev4", - "google,veyron-jerry-rev3", "google,veyron-jerry", - "google,veyron", "rockchip,rk3288"; - -- Google Kevin (Samsung Chromebook Plus): - Required root node properties: - - compatible = "google,kevin-rev15", "google,kevin-rev14", - "google,kevin-rev13", "google,kevin-rev12", - "google,kevin-rev11", "google,kevin-rev10", - "google,kevin-rev9", "google,kevin-rev8", - "google,kevin-rev7", "google,kevin-rev6", - "google,kevin", "google,gru", "rockchip,rk3399"; - -- Google Mickey (Asus Chromebit CS10): - Required root node properties: - - compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7", - "google,veyron-mickey-rev6", "google,veyron-mickey-rev5", - "google,veyron-mickey-rev4", "google,veyron-mickey-rev3", - "google,veyron-mickey-rev2", "google,veyron-mickey-rev1", - "google,veyron-mickey-rev0", "google,veyron-mickey", - "google,veyron", "rockchip,rk3288"; - -- Google Minnie (Asus Chromebook Flip C100P): - Required root node properties: - - compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3", - "google,veyron-minnie-rev2", "google,veyron-minnie-rev1", - "google,veyron-minnie-rev0", "google,veyron-minnie", - "google,veyron", "rockchip,rk3288"; - -- Google Pinky (dev-board): - Required root node properties: - - compatible = "google,veyron-pinky-rev2", "google,veyron-pinky", - "google,veyron", "rockchip,rk3288"; - -- Google Speedy (Asus C201 Chromebook): - Required root node properties: - - compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8", - "google,veyron-speedy-rev7", "google,veyron-speedy-rev6", - "google,veyron-speedy-rev5", "google,veyron-speedy-rev4", - "google,veyron-speedy-rev3", "google,veyron-speedy-rev2", - "google,veyron-speedy", "google,veyron", "rockchip,rk3288"; - -- mqmaker MiQi: - Required root node properties: - - compatible = "mqmaker,miqi", "rockchip,rk3288"; - -- Phytec phyCORE-RK3288: Rapid Development Kit - Required root node properties: - - compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288"; - -- Pine64 Rock64 board: - Required root node properties: - - compatible = "pine64,rock64", "rockchip,rk3328"; - -- Pine64 RockPro64 board: - Required root node properties: - - compatible = "pine64,rockpro64", "rockchip,rk3399"; - -- Rockchip PX3 Evaluation board: - Required root node properties: - - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188"; - -- Rockchip PX5 Evaluation board: - Required root node properties: - - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368"; - -- Rockchip PX30 Evaluation board: - Required root node properties: - - compatible = "rockchip,px30-evb", "rockchip,px30"; - -- Rockchip RV1108 Evaluation board - Required root node properties: - - compatible = "rockchip,rv1108-evb", "rockchip,rv1108"; - -- Rockchip RK3368 evb: - Required root node properties: - - compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368"; - -- Rockchip R88 board: - Required root node properties: - - compatible = "rockchip,r88", "rockchip,rk3368"; - -- Rockchip RK3228 Evaluation board: - Required root node properties: - - compatible = "rockchip,rk3228-evb", "rockchip,rk3228"; - -- Rockchip RK3229 Evaluation board: - - compatible = "rockchip,rk3229-evb", "rockchip,rk3229"; - -- Rockchip RK3288 Fennec board: - Required root node properties: - - compatible = "rockchip,rk3288-fennec", "rockchip,rk3288"; - -- Rockchip RK3328 evb: - Required root node properties: - - compatible = "rockchip,rk3328-evb", "rockchip,rk3328"; - -- Rockchip RK3399 evb: - Required root node properties: - - compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; - -- Rockchip RK3399 Sapphire board standalone: - Required root node properties: - - compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399"; - -- Rockchip RK3399 Sapphire Excavator board: - Required root node properties: - - compatible = "rockchip,rk3399-sapphire-excavator", "rockchip,rk3399"; - -- Theobroma Systems RK3368-uQ7 Haikou Baseboard: - Required root node properties: - - compatible = "tsd,rk3368-uq7-haikou", "rockchip,rk3368"; - -- Theobroma Systems RK3399-Q7 Haikou Baseboard: - Required root node properties: - - compatible = "tsd,rk3399-q7-haikou", "rockchip,rk3399"; - -- Tronsmart Orion R68 Meta - Required root node properties: - - compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368"; diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml new file mode 100644 index 000000000000..b12958bda09c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -0,0 +1,423 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/rockchip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip platforms device tree bindings + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + + - description: 96boards RK3399 Ficus (ROCK960 Enterprise Edition) + items: + - const: vamrs,ficus + - const: rockchip,rk3399 + + - description: 96boards RK3399 Rock960 (ROCK960 Consumer Edition) + items: + - const: vamrs,rock960 + - const: rockchip,rk3399 + + - description: Amarula Vyasa RK3288 + items: + - const: amarula,vyasa-rk3288 + - const: rockchip,rk3288 + + - description: Asus Tinker board + items: + - const: asus,rk3288-tinker + - const: rockchip,rk3288 + + - description: Asus Tinker board S + items: + - const: asus,rk3288-tinker-s + - const: rockchip,rk3288 + + - description: bq Curie 2 tablet + items: + - const: mundoreader,bq-curie2 + - const: rockchip,rk3066a + + - description: bq Edison 2 Quad-Core tablet + items: + - const: mundoreader,bq-edison2qc + - const: rockchip,rk3188 + + - description: ChipSPARK PopMetal-RK3288 + items: + - const: chipspark,popmetal-rk3288 + - const: rockchip,rk3288 + + - description: ChipSPARK Rayeager PX2 + items: + - const: chipspark,rayeager-px2 + - const: rockchip,rk3066a + + - description: Firefly Firefly-RK3288 + items: + - enum: + - firefly,firefly-rk3288 + - firefly,firefly-rk3288-beta + - const: rockchip,rk3288 + + - description: Firefly Firefly-RK3288 Reload + items: + - const: firefly,firefly-rk3288-reload + - const: rockchip,rk3288 + + - description: Firefly Firefly-RK3399 + items: + - const: firefly,firefly-rk3399 + - const: rockchip,rk3399 + + - description: Firefly roc-rk3328-cc + items: + - const: firefly,roc-rk3328-cc + - const: rockchip,rk3328 + + - description: Firefly ROC-RK3399-PC + items: + - const: firefly,roc-rk3399-pc + - const: rockchip,rk3399 + + - description: GeekBuying GeekBox + items: + - const: geekbuying,geekbox + - const: rockchip,rk3368 + + - description: Google Bob (Asus Chromebook Flip C101PA) + items: + - const: google,bob-rev13 + - const: google,bob-rev12 + - const: google,bob-rev11 + - const: google,bob-rev10 + - const: google,bob-rev9 + - const: google,bob-rev8 + - const: google,bob-rev7 + - const: google,bob-rev6 + - const: google,bob-rev5 + - const: google,bob-rev4 + - const: google,bob + - const: google,gru + - const: rockchip,rk3399 + + - description: Google Brain (dev-board) + items: + - const: google,veyron-brain-rev0 + - const: google,veyron-brain + - const: google,veyron + - const: rockchip,rk3288 + + - description: Google Gru (dev-board) + items: + - const: google,gru-rev15 + - const: google,gru-rev14 + - const: google,gru-rev13 + - const: google,gru-rev12 + - const: google,gru-rev11 + - const: google,gru-rev10 + - const: google,gru-rev9 + - const: google,gru-rev8 + - const: google,gru-rev7 + - const: google,gru-rev6 + - const: google,gru-rev5 + - const: google,gru-rev4 + - const: google,gru-rev3 + - const: google,gru-rev2 + - const: google,gru + - const: rockchip,rk3399 + + - description: Google Jaq (Haier Chromebook 11 and more) + items: + - const: google,veyron-jaq-rev5 + - const: google,veyron-jaq-rev4 + - const: google,veyron-jaq-rev3 + - const: google,veyron-jaq-rev2 + - const: google,veyron-jaq-rev1 + - const: google,veyron-jaq + - const: google,veyron + - const: rockchip,rk3288 + + - description: Google Jerry (Hisense Chromebook C11 and more) + items: + - const: google,veyron-jerry-rev7 + - const: google,veyron-jerry-rev6 + - const: google,veyron-jerry-rev5 + - const: google,veyron-jerry-rev4 + - const: google,veyron-jerry-rev3 + - const: google,veyron-jerry + - const: google,veyron + - const: rockchip,rk3288 + + - description: Google Kevin (Samsung Chromebook Plus) + items: + - const: google,kevin-rev15 + - const: google,kevin-rev14 + - const: google,kevin-rev13 + - const: google,kevin-rev12 + - const: google,kevin-rev11 + - const: google,kevin-rev10 + - const: google,kevin-rev9 + - const: google,kevin-rev8 + - const: google,kevin-rev7 + - const: google,kevin-rev6 + - const: google,kevin + - const: google,gru + - const: rockchip,rk3399 + + - description: Google Mickey (Asus Chromebit CS10) + items: + - const: google,veyron-mickey-rev8 + - const: google,veyron-mickey-rev7 + - const: google,veyron-mickey-rev6 + - const: google,veyron-mickey-rev5 + - const: google,veyron-mickey-rev4 + - const: google,veyron-mickey-rev3 + - const: google,veyron-mickey-rev2 + - const: google,veyron-mickey-rev1 + - const: google,veyron-mickey-rev0 + - const: google,veyron-mickey + - const: google,veyron + - const: rockchip,rk3288 + + - description: Google Minnie (Asus Chromebook Flip C100P) + items: + - const: google,veyron-minnie-rev4 + - const: google,veyron-minnie-rev3 + - const: google,veyron-minnie-rev2 + - const: google,veyron-minnie-rev1 + - const: google,veyron-minnie-rev0 + - const: google,veyron-minnie + - const: google,veyron + - const: rockchip,rk3288 + + - description: Google Pinky (dev-board) + items: + - const: google,veyron-pinky-rev2 + - const: google,veyron-pinky + - const: google,veyron + - const: rockchip,rk3288 + + - description: Google Scarlet - Kingdisplay (Acer Chromebook Tab 10) + items: + - const: google,scarlet-rev15-sku7 + - const: google,scarlet-rev15 + - const: google,scarlet-rev14-sku7 + - const: google,scarlet-rev14 + - const: google,scarlet-rev13-sku7 + - const: google,scarlet-rev13 + - const: google,scarlet-rev12-sku7 + - const: google,scarlet-rev12 + - const: google,scarlet-rev11-sku7 + - const: google,scarlet-rev11 + - const: google,scarlet-rev10-sku7 + - const: google,scarlet-rev10 + - const: google,scarlet-rev9-sku7 + - const: google,scarlet-rev9 + - const: google,scarlet-rev8-sku7 + - const: google,scarlet-rev8 + - const: google,scarlet-rev7-sku7 + - const: google,scarlet-rev7 + - const: google,scarlet-rev6-sku7 + - const: google,scarlet-rev6 + - const: google,scarlet-rev5-sku7 + - const: google,scarlet-rev5 + - const: google,scarlet-rev4-sku7 + - const: google,scarlet-rev4 + - const: google,scarlet-rev3-sku7 + - const: google,scarlet-rev3 + - const: google,scarlet + - const: google,gru + - const: rockchip,rk3399 + + - description: Google Scarlet - Innolux display (Acer Chromebook Tab 10) + items: + - const: google,scarlet-rev15-sku6 + - const: google,scarlet-rev15 + - const: google,scarlet-rev14-sku6 + - const: google,scarlet-rev14 + - const: google,scarlet-rev13-sku6 + - const: google,scarlet-rev13 + - const: google,scarlet-rev12-sku6 + - const: google,scarlet-rev12 + - const: google,scarlet-rev11-sku6 + - const: google,scarlet-rev11 + - const: google,scarlet-rev10-sku6 + - const: google,scarlet-rev10 + - const: google,scarlet-rev9-sku6 + - const: google,scarlet-rev9 + - const: google,scarlet-rev8-sku6 + - const: google,scarlet-rev8 + - const: google,scarlet-rev7-sku6 + - const: google,scarlet-rev7 + - const: google,scarlet-rev6-sku6 + - const: google,scarlet-rev6 + - const: google,scarlet-rev5-sku6 + - const: google,scarlet-rev5 + - const: google,scarlet-rev4-sku6 + - const: google,scarlet-rev4 + - const: google,scarlet + - const: google,gru + - const: rockchip,rk3399 + + - description: Google Speedy (Asus C201 Chromebook) + items: + - const: google,veyron-speedy-rev9 + - const: google,veyron-speedy-rev8 + - const: google,veyron-speedy-rev7 + - const: google,veyron-speedy-rev6 + - const: google,veyron-speedy-rev5 + - const: google,veyron-speedy-rev4 + - const: google,veyron-speedy-rev3 + - const: google,veyron-speedy-rev2 + - const: google,veyron-speedy + - const: google,veyron + - const: rockchip,rk3288 + + - description: Haoyu MarsBoard RK3066 + items: + - const: haoyu,marsboard-rk3066 + - const: rockchip,rk3066a + + - description: mqmaker MiQi + items: + - const: mqmaker,miqi + - const: rockchip,rk3288 + + - description: Netxeon R89 board + items: + - const: netxeon,r89 + - const: rockchip,rk3288 + + - description: Phytec phyCORE-RK3288 Rapid Development Kit + items: + - const: phytec,rk3288-pcm-947 + - const: phytec,rk3288-phycore-som + - const: rockchip,rk3288 + + - description: Pine64 Rock64 + items: + - const: pine64,rock64 + - const: rockchip,rk3328 + + - description: Pine64 RockPro64 + items: + - const: pine64,rockpro64 + - const: rockchip,rk3399 + + - description: Radxa Rock + items: + - const: radxa,rock + - const: rockchip,rk3188 + + - description: Radxa Rock2 Square + items: + - const: radxa,rock2-square + - const: rockchip,rk3288 + + - description: Rikomagic MK808 v1 + items: + - const: rikomagic,mk808 + - const: rockchip,rk3066a + + - description: Rockchip Kylin + items: + - const: rockchip,kylin-rk3036 + - const: rockchip,rk3036 + + - description: Rockchip PX3 Evaluation board + items: + - const: rockchip,px3-evb + - const: rockchip,px3 + - const: rockchip,rk3188 + + - description: Rockchip PX30 Evaluation board + items: + - const: rockchip,px30-evb + - const: rockchip,px30 + + - description: Rockchip PX5 Evaluation board + items: + - const: rockchip,px5-evb + - const: rockchip,px5 + - const: rockchip,rk3368 + + - description: Rockchip R88 + items: + - const: rockchip,r88 + - const: rockchip,rk3368 + + - description: Rockchip RK3228 Evaluation board + items: + - const: rockchip,rk3228-evb + - const: rockchip,rk3228 + + - description: Rockchip RK3229 Evaluation board + items: + - const: rockchip,rk3229-evb + - const: rockchip,rk3229 + + - description: Rockchip RK3288 Evaluation board + items: + - enum: + - rockchip,rk3288-evb-act8846 + - rockchip,rk3288-evb-rk808 + - const: rockchip,rk3288 + + - description: Rockchip RK3288 Fennec + items: + - const: rockchip,rk3288-fennec + - const: rockchip,rk3288 + + - description: Rockchip RK3328 Evaluation board + items: + - const: rockchip,rk3328-evb + - const: rockchip,rk3328 + + - description: Rockchip RK3368 Evaluation board (act8846 pmic) + items: + - const: rockchip,rk3368-evb-act8846 + - const: rockchip,rk3368 + + - description: Rockchip RK3399 Evaluation board + items: + - const: rockchip,rk3399-evb + - const: rockchip,rk3399 + + - description: Rockchip RK3399 Sapphire standalone + items: + - const: rockchip,rk3399-sapphire + - const: rockchip,rk3399 + + - description: Rockchip RK3399 Sapphire with Excavator Baseboard + items: + - const: rockchip,rk3399-sapphire-excavator + - const: rockchip,rk3399 + + - description: Rockchip RV1108 Evaluation board + items: + - const: rockchip,rv1108-evb + - const: rockchip,rv1108 + + - description: Theobroma Systems RK3368-uQ7 with Haikou baseboard + items: + - const: tsd,rk3368-uq7-haikou + - const: rockchip,rk3368 + + - description: Theobroma Systems RK3399-Q7 with Haikou baseboard + items: + - const: tsd,rk3399-q7-haikou + - const: rockchip,rk3399 + + - description: Tronsmart Orion R68 Meta + items: + - const: tronsmart,orion-r68-meta + - const: rockchip,rk3368 +... diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index 58c4256d37a3..7f91c2a8b54e 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -101,6 +101,10 @@ Boards: compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743" - iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven) compatible = "iwave,g20m", "renesas,r8a7743" + - iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven) + compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744" + - iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven) + compatible = "iwave,g20m", "renesas,r8a7744" - Kingfisher (SBEV-RCAR-KF-M03) compatible = "shimafuji,kingfisher" - Koelsch (RTP0RC7791SEB00010S) @@ -149,21 +153,3 @@ Boards: compatible = "renesas,v3msk", "renesas,r8a77970" - Wheat (RTP0RC7792ASKB0000JE) compatible = "renesas,wheat", "renesas,r8a7792" - - -Most Renesas ARM SoCs have a Product Register or Boundary Scan ID Register that -allows to retrieve SoC product and revision information. If present, a device -node for this register should be added. - -Required properties: - - compatible: Must be "renesas,prr" or "renesas,bsid" - - reg: Base address and length of the register block. - - -Examples --------- - - prr: chipid@ff000044 { - compatible = "renesas,prr"; - reg = <0 0xff000044 0 4>; - }; diff --git a/Documentation/devicetree/bindings/arm/uniphier/cache-uniphier.txt b/Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt index d27a646f48a9..d27a646f48a9 100644 --- a/Documentation/devicetree/bindings/arm/uniphier/cache-uniphier.txt +++ b/Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.txt b/Documentation/devicetree/bindings/arm/socionext/uniphier.txt new file mode 100644 index 000000000000..b3ed1033740e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/socionext/uniphier.txt @@ -0,0 +1,47 @@ +Socionext UniPhier SoC family +----------------------------- + +Required properties in the root node: + - compatible: should contain board and SoC compatible strings + +SoC and board compatible strings: + (sorted chronologically) + + - LD4 SoC: "socionext,uniphier-ld4" + - Reference Board: "socionext,uniphier-ld4-ref" + + - Pro4 SoC: "socionext,uniphier-pro4" + - Reference Board: "socionext,uniphier-pro4-ref" + - Ace Board: "socionext,uniphier-pro4-ace" + - Sanji Board: "socionext,uniphier-pro4-sanji" + + - sLD8 SoC: "socionext,uniphier-sld8" + - Reference Board: "socionext,uniphier-sld8-ref" + + - PXs2 SoC: "socionext,uniphier-pxs2" + - Gentil Board: "socionext,uniphier-pxs2-gentil" + - Vodka Board: "socionext,uniphier-pxs2-vodka" + + - LD6b SoC: "socionext,uniphier-ld6b" + - Reference Board: "socionext,uniphier-ld6b-ref" + + - LD11 SoC: "socionext,uniphier-ld11" + - Reference Board: "socionext,uniphier-ld11-ref" + - Global Board: "socionext,uniphier-ld11-global" + + - LD20 SoC: "socionext,uniphier-ld20" + - Reference Board: "socionext,uniphier-ld20-ref" + - Global Board: "socionext,uniphier-ld20-global" + + - PXs3 SoC: "socionext,uniphier-pxs3" + - Reference Board: "socionext,uniphier-pxs3-ref" + +Example: + +/dts-v1/; + +/ { + compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20"; + + ... +}; diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt index f9ddc05d32f0..9254cbe7d516 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.txt +++ b/Documentation/devicetree/bindings/arm/sunxi.txt @@ -14,7 +14,8 @@ using one of the following compatible strings: allwinner,sun8i-a83t allwinner,sun8i-h2-plus allwinner,sun8i-h3 - allwinner-sun8i-r40 + allwinner,sun8i-r40 + allwinner,sun8i-t3 allwinner,sun8i-v3s allwinner,sun9i-a80 allwinner,sun50i-a64 diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt index c9fd6d1de57e..2d89cdc39eb0 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt @@ -15,6 +15,9 @@ Required properties: Optional properties: - nvidia,invert-interrupt: If present, inverts the PMU interrupt signal. +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The value must be 2. Example: diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt index 3a880528030e..79511d7bb321 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt @@ -11,6 +11,13 @@ Required Properties: - GXM (S912) : "amlogic,meson-gxm-aoclkc" - AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc" followed by the common "amlogic,meson-gx-aoclkc" +- clocks: list of clock phandle, one for each entry clock-names. +- clock-names: should contain the following: + * "xtal" : the platform xtal + * "mpeg-clk" : the main clock controller mother clock (aka clk81) + * "ext-32k-0" : external 32kHz reference #0 if any (optional) + * "ext-32k-1" : external 32kHz reference #1 if any (optional - gx only) + * "ext-32k-2" : external 32kHz reference #2 if any (optional - gx only) - #clock-cells: should be 1. @@ -40,8 +47,9 @@ ao_sysctrl: sys-ctrl@0 { compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc"; #clock-cells = <1>; #reset-cells = <1>; + clocks = <&xtal>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "mpeg-clk"; }; -}; Example: UART controller node that consumes the clock and reset generated by the clock controller: diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt index e950599566a9..a6871953bf04 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt @@ -9,6 +9,9 @@ Required Properties: "amlogic,gxbb-clkc" for GXBB SoC, "amlogic,gxl-clkc" for GXL and GXM SoC, "amlogic,axg-clkc" for AXG SoC. +- clocks : list of clock phandle, one for each entry clock-names. +- clock-names : should contain the following: + * "xtal": the platform xtal - #clock-cells: should be 1. @@ -31,6 +34,8 @@ sysctrl: system-controller@0 { clkc: clock-controller { #clock-cells = <1>; compatible = "amlogic,gxbb-clkc"; + clocks = <&xtal>; + clock-names = "xtal"; }; }; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt index 63cd91176a68..3f128e4f95c6 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt @@ -11,6 +11,7 @@ Required properties: + allwinner,sun4i-a10-mali + allwinner,sun7i-a20-mali + allwinner,sun8i-h3-mali + + allwinner,sun50i-a64-mali + allwinner,sun50i-h5-mali + amlogic,meson-gxbb-mali + amlogic,meson-gxl-mali @@ -73,6 +74,10 @@ to specify one more vendor-specific compatible, among: Required properties: * resets: phandle to the reset line for the GPU + - allwinner,sun50i-a64-mali + Required properties: + * resets: phandle to the reset line for the GPU + - allwinner,sun50i-h5-mali Required properties: * resets: phandle to the reset line for the GPU diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt index b3c86f4ac7cd..c81993f8d8c3 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt @@ -140,6 +140,10 @@ VADC_GND_REF and VADC_VDD_VADC. Example: +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <linux/irq.h> +/* ... */ + /* VADC node */ pmic_vadc: vadc@3100 { compatible = "qcom,spmi-vadc"; @@ -151,7 +155,7 @@ Example: io-channel-ranges; /* Channel node */ - usb_id_nopull { + adc-chan@VADC_LR_MUX10_USB_ID { reg = <VADC_LR_MUX10_USB_ID>; qcom,decimation = <512>; qcom,ratiometric; diff --git a/Documentation/devicetree/bindings/media/cedrus.txt b/Documentation/devicetree/bindings/media/cedrus.txt index b3c0635dcd0e..bce0705df953 100644 --- a/Documentation/devicetree/bindings/media/cedrus.txt +++ b/Documentation/devicetree/bindings/media/cedrus.txt @@ -33,7 +33,7 @@ reserved-memory { ranges; /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ - cma_pool: cma@4a000000 { + cma_pool: default-pool { compatible = "shared-dma-pool"; size = <0x6000000>; alloc-ranges = <0x4a000000 0x6000000>; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt index 4c33b29dc660..add95367640b 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt @@ -10,6 +10,8 @@ Properties: and chosen using the ramcode board selector. If omitted, only one set of tables can be present and said tables will be used irrespective of ram-code configuration. +- interrupts : Should contain EMC General interrupt. +- clocks : Should contain EMC clock. Child device nodes describe the memory settings for different configurations and clock rates. @@ -20,6 +22,8 @@ Example: #size-cells = < 0 >; compatible = "nvidia,tegra20-emc"; reg = <0x7000f4000 0x200>; + interrupts = <0 78 0x04>; + clocks = <&tegra_car TEGRA20_CLK_EMC>; } diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt index 5bb3a18cc38d..54c66d0611cb 100644 --- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt +++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt @@ -10,6 +10,7 @@ Required properties: "allwinner,sun8i-r40-gmac" "allwinner,sun8i-v3s-emac" "allwinner,sun50i-a64-emac" + "allwinner,sun50i-h6-emac", "allwinner-sun50i-a64-emac" - reg: address and length of the register for the device. - interrupts: interrupt for the device - interrupt-names: must be "macirq" diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index 66df1e81e0b8..9b2b8d66d1f4 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -13,11 +13,12 @@ information. Required properties: - compatible: should contain the platform identifier such as: - "fsl,ls1021a-pcie", "snps,dw-pcie" - "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie" + "fsl,ls1021a-pcie" + "fsl,ls2080a-pcie", "fsl,ls2085a-pcie" "fsl,ls2088a-pcie" "fsl,ls1088a-pcie" "fsl,ls1046a-pcie" + "fsl,ls1043a-pcie" "fsl,ls1012a-pcie" - reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an @@ -35,7 +36,7 @@ Required properties: Example: pcie@3400000 { - compatible = "fsl,ls1021a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls1021a-pcie"; reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt index 8dd7b3a7de65..f331316183f6 100644 --- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt @@ -2,7 +2,8 @@ Broadcom VCHIQ firmware services Required properties: -- compatible: Should be "brcm,bcm2835-vchiq" +- compatible: Should be "brcm,bcm2835-vchiq" on BCM2835, otherwise + "brcm,bcm2836-vchiq". - reg: Physical base address and length of the doorbell register pair - interrupts: The interrupt number See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt index 276387dd6815..e17c07be270b 100644 --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt @@ -15,7 +15,8 @@ Required properties: - compatible: Array of strings. One of: - - "nvidia,tegra186-bpmp-thermal". + - "nvidia,tegra186-bpmp-thermal" + - "nvidia,tegra194-bpmp-thermal" - #thermal-sensor-cells: Cell for sensor index. Single-cell integer. Must be <1>. diff --git a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt index a092053f7902..a9da22bda912 100644 --- a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt +++ b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt @@ -4,12 +4,19 @@ Required properties: - compatible : should be "amlogic,meson6-timer" - reg : Specifies base physical address and size of the registers. -- interrupts : The interrupt of the first timer +- interrupts : The four interrupts, one for each timer event +- clocks : phandles to the pclk (system clock) and XTAL clocks +- clock-names : must contain "pclk" and "xtal" Example: timer@c1109940 { compatible = "amlogic,meson6-timer"; reg = <0xc1109940 0x14>; - interrupts = <0 10 1>; + interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clk81>; + clock-names = "xtal", "pclk"; }; diff --git a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt index 9a6e251462e7..b8f02c663521 100644 --- a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt +++ b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt @@ -5,9 +5,13 @@ Required properties: - reg : Address and length of the register set of timer controller. - interrupts : Should be the interrupt number. +Optional properties: +- clocks : Should contain a single entry describing the clock input. + Example: timer0: timer@d4014000 { compatible = "mrvl,mmp-timer"; reg = <0xd4014000 0x100>; interrupts = <13>; + clocks = <&coreclk 2>; }; diff --git a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt index 16a5f4577a61..d65fdce7c7f0 100644 --- a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt +++ b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt @@ -2,6 +2,7 @@ Rockchip rk timer Required properties: - compatible: should be: + "rockchip,rv1108-timer", "rockchip,rk3288-timer": for Rockchip RV1108 "rockchip,rk3036-timer", "rockchip,rk3288-timer": for Rockchip RK3036 "rockchip,rk3066-timer", "rockchip,rk3288-timer": for Rockchip RK3066 "rockchip,rk3188-timer", "rockchip,rk3288-timer": for Rockchip RK3188 diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt index 3eee9e505400..4156c3e181c5 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt @@ -59,6 +59,14 @@ For Tegra210: - avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. - dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. - hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V. +- power-domains: A list of PM domain specifiers that reference each power-domain + used by the xHCI controller. This list must comprise of a specifier for the + XUSBA and XUSBC power-domains. See ../power/power_domain.txt and + ../arm/tegra/nvidia,tegra20-pmc.txt for details. +- power-domain-names: A list of names that represent each of the specifiers in + the 'power-domains' property. Must include 'xusb_ss' and 'xusb_host' which + represent the power-domains XUSBA and XUSBC, respectively. See + ../power/power_domain.txt for details. Optional properties: -------------------- diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index dbe926b6b78a..3bbe3b87a1ff 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -114,6 +114,7 @@ edt Emerging Display Technologies eeti eGalax_eMPIA Technology Inc elan Elan Microelectronic Corp. embest Shenzhen Embest Technology Co., Ltd. +emlid Emlid, Ltd. emmicro EM Microelectronic emtrion emtrion GmbH endless Endless Mobile, Inc. @@ -298,6 +299,7 @@ panasonic Panasonic Corporation parade Parade Technologies Inc. pericom Pericom Technology Inc. pervasive Pervasive Displays, Inc. +phicomm PHICOMM Co., Ltd. phytec PHYTEC Messtechnik GmbH picochip Picochip Ltd pine64 Pine64 diff --git a/MAINTAINERS b/MAINTAINERS index 046dad9636e8..4825cd8f23be 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2225,6 +2225,7 @@ S: Supported F: Documentation/devicetree/bindings/arm/ti/k3.txt F: arch/arm64/boot/dts/ti/Makefile F: arch/arm64/boot/dts/ti/k3-* +F: include/dt-bindings/pinctrl/k3.h ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE M: Santosh Shilimkar <ssantosh@kernel.org> @@ -2268,6 +2269,7 @@ M: Masahiro Yamada <yamada.masahiro@socionext.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git S: Maintained +F: Documentation/devicetree/bindings/arm/socionext/uniphier.txt F: Documentation/devicetree/bindings/gpio/gpio-uniphier.txt F: Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt F: arch/arm/boot/dts/uniphier* @@ -12582,6 +12584,13 @@ L: linux-arm-msm@vger.kernel.org S: Maintained F: drivers/iommu/qcom_iommu.c +QUALCOMM TSENS THERMAL DRIVER +M: Amit Kucheria <amit.kucheria@linaro.org> +L: linux-pm@vger.kernel.org +L: linux-arm-msm@vger.kernel.org +S: Maintained +F: drivers/thermal/qcom/ + QUALCOMM VENUS VIDEO ACCELERATOR DRIVER M: Stanimir Varbanov <stanimir.varbanov@linaro.org> L: linux-media@vger.kernel.org diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b0e966d625b9..78551c4375d5 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -89,6 +89,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac68u.dtb \ bcm4708-buffalo-wzr-1750dhp.dtb \ bcm4708-linksys-ea6300-v1.dtb \ + bcm4708-linksys-ea6500-v2.dtb \ bcm4708-luxul-xap-1510.dtb \ bcm4708-luxul-xwc-1000.dtb \ bcm4708-netgear-r6250.dtb \ @@ -396,6 +397,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-cubox-i-emmc-som-v15.dtb \ imx6dl-cubox-i-som-v15.dtb \ imx6dl-dfi-fs700-m60.dtb \ + imx6dl-emcon-avari.dtb \ imx6dl-gw51xx.dtb \ imx6dl-gw52xx.dtb \ imx6dl-gw53xx.dtb \ @@ -460,6 +462,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-display5-tianma-tm070-1280x768.dtb \ imx6q-dmo-edmqmx6.dtb \ imx6q-dms-ba16.dtb \ + imx6q-emcon-avari.dtb \ imx6q-evi.dtb \ imx6q-gk802.dtb \ imx6q-gw51xx.dtb \ @@ -557,6 +560,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-liteboard.dtb \ imx6ul-opos6uldev.dtb \ imx6ul-pico-hobbit.dtb \ + imx6ul-pico-pi.dtb \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ @@ -569,18 +573,23 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-colibri-emmc-eval-v3.dtb \ imx7d-colibri-eval-v3.dtb \ imx7d-nitrogen7.dtb \ + imx7d-pico-hobbit.dtb \ imx7d-pico-pi.dtb \ imx7d-sbc-imx7.dtb \ imx7d-sdb.dtb \ + imx7d-sdb-reva.dtb \ imx7d-sdb-sht11.dtb \ imx7s-colibri-eval-v3.dtb \ imx7s-warp.dtb +dtb-$(CONFIG_SOC_IMX7ULP) += \ + imx7ulp-evk.dtb dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ ls1021a-twr.dtb dtb-$(CONFIG_SOC_VF610) += \ vf500-colibri-eval-v3.dtb \ + vf610-bk4.dtb \ vf610-colibri-eval-v3.dtb \ vf610m4-colibri.dtb \ vf610-cosmic.dtb \ @@ -589,6 +598,7 @@ dtb-$(CONFIG_SOC_VF610) += \ vf610-zii-cfu1.dtb \ vf610-zii-dev-rev-b.dtb \ vf610-zii-dev-rev-c.dtb \ + vf610-zii-scu4-aib.dtb \ vf610-zii-ssmb-spu3.dtb dtb-$(CONFIG_ARCH_MXS) += \ imx23-evk.dtb \ @@ -778,12 +788,18 @@ dtb-$(CONFIG_ARCH_ACTIONS) += \ owl-s500-sparky.dtb dtb-$(CONFIG_ARCH_PRIMA2) += \ prima2-evb.dtb +dtb-$(CONFIG_ARCH_PXA) += \ + pxa300-raumfeld-connector.dtb \ + pxa300-raumfeld-controller.dtb \ + pxa300-raumfeld-speaker-l.dtb \ + pxa300-raumfeld-speaker-m.dtb \ + pxa300-raumfeld-speaker-one.dtb \ + pxa300-raumfeld-speaker-s.dtb dtb-$(CONFIG_ARCH_OXNAS) += \ ox810se-wd-mbwe.dtb \ ox820-cloudengines-pogoplug-series-3.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8060-dragonboard.dtb \ - qcom-apq8064-arrow-sd-600eval.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ qcom-apq8064-sony-xperia-yuga.dtb \ @@ -829,6 +845,8 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r8a7743-iwg20d-q7.dtb \ r8a7743-iwg20d-q7-dbcm-ca.dtb \ r8a7743-sk-rzg1m.dtb \ + r8a7744-iwg20d-q7.dtb \ + r8a7744-iwg20d-q7-dbcm-ca.dtb \ r8a7745-iwg22d-sodimm.dtb \ r8a7745-iwg22d-sodimm-dbhd-ca.dtb \ r8a7745-sk-rzg1e.dtb \ @@ -854,6 +872,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-marsboard.dtb \ rk3066a-mk808.dtb \ rk3066a-rayeager.dtb \ + rk3188-bqedison2qc.dtb \ rk3188-px3-evb.dtb \ rk3188-radxarock.dtb \ rk3228-evb.dtb \ @@ -1043,6 +1062,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-bananapi-m2-plus-v1.2.dtb \ sun8i-h3-beelink-x2.dtb \ sun8i-h3-libretech-all-h3-cc.dtb \ + sun8i-h3-mapleboard-mp130.dtb \ sun8i-h3-nanopi-m1.dtb \ sun8i-h3-nanopi-m1-plus.dtb \ sun8i-h3-nanopi-neo.dtb \ @@ -1060,12 +1080,15 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-r16-nintendo-super-nes-classic.dtb \ sun8i-r16-parrot.dtb \ sun8i-r40-bananapi-m2-ultra.dtb \ + sun8i-t3-cqa3t-bv3.dtb \ sun8i-v3s-licheepi-zero.dtb \ sun8i-v3s-licheepi-zero-dock.dtb \ sun8i-v40-bananapi-m2-berry.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb +dtb-$(CONFIG_MACH_SUNIV) += \ + suniv-f1c100s-licheepi-nano.dtb dtb-$(CONFIG_ARCH_TANGO) += \ tango4-vantage-1172.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ @@ -1212,6 +1235,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ + aspeed-bmc-facebook-cmm.dtb \ aspeed-bmc-facebook-tiogapass.dtb \ aspeed-bmc-intel-s2600wf.dtb \ aspeed-bmc-opp-lanyang.dtb \ diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 9e5e75ea87f5..456eef57ef89 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -419,6 +419,6 @@ }; &rtc { - clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; }; diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index 7bcd72691f06..ccb147e70d17 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -515,7 +515,7 @@ &rtc { system-power-controller; - clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; }; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index c4d3e1f1a95e..2c724bb60417 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -393,7 +393,7 @@ status = "okay"; &epwmss0 { status = "okay"; - ecap0: ecap@48300100 { + ecap0: ecap@100 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ecap0_pins>; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 98ec9c3e49ba..b67f5fee1469 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -519,7 +519,7 @@ &epwmss0 { status = "okay"; - ecap0: ecap@48300100 { + ecap0: ecap@100 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ecap0_pins>; @@ -797,6 +797,6 @@ }; &rtc { - clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 245868f58fe3..172c0224e7f6 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -540,7 +540,7 @@ &epwmss2 { status = "okay"; - ecap2: ecap@48304100 { + ecap2: ecap@100 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ecap2_pins>; @@ -738,6 +738,6 @@ }; &rtc { - clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; }; diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts index 85cd1d0a73ca..95d54cf3849e 100644 --- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts +++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts @@ -456,6 +456,6 @@ }; &rtc { - clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; }; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index 1d925ed2b102..d0fd68873689 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -138,7 +138,7 @@ &epwmss1 { status = "okay"; - ehrpwm1: pwm@48302200 { + ehrpwm1: pwm@200 { pinctrl-names = "default"; pinctrl-0 = <&ehrpwm1_pins>; status = "okay"; @@ -205,7 +205,7 @@ pinctrl-1 = <&cpsw_sleep>; status = "okay"; slaves = <1>; - cpsw_emac0: slave@4a100200 { + cpsw_emac0: slave@200 { phy-mode = "mii"; phy-handle = <ðernetphy0>; }; diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index 95d5c9d136c5..922182439048 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -334,49 +334,49 @@ timer1_fck: timer1_fck@528 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>; + clocks = <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>; reg = <0x0528>; }; timer2_fck: timer2_fck@508 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0508>; }; timer3_fck: timer3_fck@50c { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x050c>; }; timer4_fck: timer4_fck@510 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0510>; }; timer5_fck: timer5_fck@518 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0518>; }; timer6_fck: timer6_fck@51c { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x051c>; }; timer7_fck: timer7_fck@504 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0504>; }; @@ -407,7 +407,7 @@ wdt1_fck: wdt1_fck@538 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&clk_rc32k_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&clk_rc32k_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0538>; }; @@ -477,7 +477,7 @@ gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x053c>; }; @@ -539,86 +539,140 @@ }; &prcm { - l4_per_cm: l4_per_cm@0 { + per_cm: per-cm@0 { compatible = "ti,omap4-cm"; - reg = <0x0 0x200>; + reg = <0x0 0x400>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x0 0x200>; + ranges = <0 0x0 0x400>; - l4_per_clkctrl: clk@14 { + l4ls_clkctrl: l4ls-clkctrl@38 { compatible = "ti,clkctrl"; - reg = <0x14 0x13c>; + reg = <0x38 0x2c>, <0x6c 0x28>, <0xac 0xc>, <0xc0 0x1c>, <0xec 0xc>, <0x10c 0x8>, <0x130 0x4>; + #clock-cells = <2>; + }; + + l3s_clkctrl: l3s-clkctrl@1c { + compatible = "ti,clkctrl"; + reg = <0x1c 0x4>, <0x30 0x8>, <0x68 0x4>, <0xf8 0x4>; + #clock-cells = <2>; + }; + + l3_clkctrl: l3-clkctrl@24 { + compatible = "ti,clkctrl"; + reg = <0x24 0xc>, <0x94 0x10>, <0xbc 0x4>, <0xdc 0x8>, <0xfc 0x8>; + #clock-cells = <2>; + }; + + l4hs_clkctrl: l4hs-clkctrl@120 { + compatible = "ti,clkctrl"; + reg = <0x120 0x4>; + #clock-cells = <2>; + }; + + pruss_ocp_clkctrl: pruss-ocp-clkctrl@e8 { + compatible = "ti,clkctrl"; + reg = <0xe8 0x4>; + #clock-cells = <2>; + }; + + cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0x18>; + #clock-cells = <2>; + }; + + lcdc_clkctrl: lcdc-clkctrl@18 { + compatible = "ti,clkctrl"; + reg = <0x18 0x4>; + #clock-cells = <2>; + }; + + clk_24mhz_clkctrl: clk-24mhz-clkctrl@14c { + compatible = "ti,clkctrl"; + reg = <0x14c 0x4>; #clock-cells = <2>; }; }; - l4_wkup_cm: l4_wkup_cm@400 { + wkup_cm: wkup-cm@400 { compatible = "ti,omap4-cm"; reg = <0x400 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x400 0x100>; - l4_wkup_clkctrl: clk@4 { + l4_wkup_clkctrl: l4-wkup-clkctrl@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0x10>, <0xb4 0x24>; + #clock-cells = <2>; + }; + + l3_aon_clkctrl: l3-aon-clkctrl@14 { + compatible = "ti,clkctrl"; + reg = <0x14 0x4>; + #clock-cells = <2>; + }; + + l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@b0 { compatible = "ti,clkctrl"; - reg = <0x4 0xd4>; + reg = <0xb0 0x4>; #clock-cells = <2>; }; }; - mpu_cm: mpu_cm@600 { + mpu_cm: mpu-cm@600 { compatible = "ti,omap4-cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x600 0x100>; - mpu_clkctrl: clk@4 { + mpu_clkctrl: mpu-clkctrl@0 { compatible = "ti,clkctrl"; - reg = <0x4 0x4>; + reg = <0x0 0x8>; #clock-cells = <2>; }; }; - l4_rtc_cm: l4_rtc_cm@800 { + l4_rtc_cm: l4-rtc-cm@800 { compatible = "ti,omap4-cm"; reg = <0x800 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x800 0x100>; - l4_rtc_clkctrl: clk@0 { + l4_rtc_clkctrl: l4-rtc-clkctrl@0 { compatible = "ti,clkctrl"; reg = <0x0 0x4>; #clock-cells = <2>; }; }; - gfx_l3_cm: gfx_l3_cm@900 { + gfx_l3_cm: gfx-l3-cm@900 { compatible = "ti,omap4-cm"; reg = <0x900 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x900 0x100>; - gfx_l3_clkctrl: clk@4 { + gfx_l3_clkctrl: gfx-l3-clkctrl@0 { compatible = "ti,clkctrl"; - reg = <0x4 0x4>; + reg = <0x0 0x8>; #clock-cells = <2>; }; }; - l4_cefuse_cm: l4_cefuse_cm@a00 { + l4_cefuse_cm: l4-cefuse-cm@a00 { compatible = "ti,omap4-cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xa00 0x100>; - l4_cefuse_clkctrl: clk@20 { + l4_cefuse_clkctrl: l4-cefuse-clkctrl@0 { compatible = "ti,clkctrl"; - reg = <0x20 0x4>; + reg = <0x0 0x24>; #clock-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi new file mode 100644 index 000000000000..7b818d9d2eab --- /dev/null +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -0,0 +1,2132 @@ +&l4_wkup { /* 0x44c00000 */ + compatible = "ti,am33xx-l4-wkup", "simple-bus"; + reg = <0x44c00000 0x800>, + <0x44c00800 0x800>, + <0x44c01000 0x400>, + <0x44c01400 0x400>; + reg-names = "ap", "la", "ia0", "ia1"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x44c00000 0x100000>, /* segment 0 */ + <0x00100000 0x44d00000 0x100000>, /* segment 1 */ + <0x00200000 0x44e00000 0x100000>; /* segment 2 */ + + segment@0 { /* 0x44c00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00000800 0x00000800 0x000800>, /* ap 1 */ + <0x00001000 0x00001000 0x000400>, /* ap 2 */ + <0x00001400 0x00001400 0x000400>; /* ap 3 */ + }; + + segment@100000 { /* 0x44d00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00100000 0x004000>, /* ap 4 */ + <0x00004000 0x00104000 0x001000>, /* ap 5 */ + <0x00080000 0x00180000 0x002000>, /* ap 6 */ + <0x00082000 0x00182000 0x001000>; /* ap 7 */ + + target-module@0 { /* 0x44d00000, ap 4 28.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x0 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x4000>; + status = "disabled"; + }; + + target-module@80000 { /* 0x44d80000, ap 6 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x2000>; + }; + }; + + segment@200000 { /* 0x44e00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00200000 0x002000>, /* ap 8 */ + <0x00002000 0x00202000 0x001000>, /* ap 9 */ + <0x00003000 0x00203000 0x001000>, /* ap 10 */ + <0x00004000 0x00204000 0x001000>, /* ap 11 */ + <0x00005000 0x00205000 0x001000>, /* ap 12 */ + <0x00006000 0x00206000 0x001000>, /* ap 13 */ + <0x00007000 0x00207000 0x001000>, /* ap 14 */ + <0x00008000 0x00208000 0x001000>, /* ap 15 */ + <0x00009000 0x00209000 0x001000>, /* ap 16 */ + <0x0000a000 0x0020a000 0x001000>, /* ap 17 */ + <0x0000b000 0x0020b000 0x001000>, /* ap 18 */ + <0x0000c000 0x0020c000 0x001000>, /* ap 19 */ + <0x0000d000 0x0020d000 0x001000>, /* ap 20 */ + <0x0000f000 0x0020f000 0x001000>, /* ap 21 */ + <0x00010000 0x00210000 0x010000>, /* ap 22 */ + <0x00020000 0x00220000 0x010000>, /* ap 23 */ + <0x00030000 0x00230000 0x001000>, /* ap 24 */ + <0x00031000 0x00231000 0x001000>, /* ap 25 */ + <0x00032000 0x00232000 0x001000>, /* ap 26 */ + <0x00033000 0x00233000 0x001000>, /* ap 27 */ + <0x00034000 0x00234000 0x001000>, /* ap 28 */ + <0x00035000 0x00235000 0x001000>, /* ap 29 */ + <0x00036000 0x00236000 0x001000>, /* ap 30 */ + <0x00037000 0x00237000 0x001000>, /* ap 31 */ + <0x00038000 0x00238000 0x001000>, /* ap 32 */ + <0x00039000 0x00239000 0x001000>, /* ap 33 */ + <0x0003a000 0x0023a000 0x001000>, /* ap 34 */ + <0x0003e000 0x0023e000 0x001000>, /* ap 35 */ + <0x0003f000 0x0023f000 0x001000>, /* ap 36 */ + <0x0000e000 0x0020e000 0x001000>, /* ap 37 */ + <0x00040000 0x00240000 0x040000>, /* ap 38 */ + <0x00080000 0x00280000 0x001000>; /* ap 39 */ + + target-module@0 { /* 0x44e00000, ap 8 58.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x2000>; + + prcm: prcm@0 { + compatible = "ti,am3-prcm", "simple-bus"; + reg = <0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + }; + + target-module@3000 { /* 0x44e03000, ap 10 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3000 0x1000>; + }; + + target-module@5000 { /* 0x44e05000, ap 12 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5000 0x1000>; + }; + + target-module@7000 { /* 0x44e07000, ap 14 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio1"; + reg = <0x7000 0x4>, + <0x7010 0x4>, + <0x7114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_GPIO1_CLKCTRL 0>, + <&l4_wkup_clkctrl AM3_L4_WKUP_GPIO1_CLKCTRL 18>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7000 0x1000>; + + gpio0: gpio@0 { + compatible = "ti,omap4-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x1000>; + interrupts = <96>; + }; + }; + + target-module@9000 { /* 0x44e09000, ap 16 04.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart1"; + reg = <0x9050 0x4>, + <0x9054 0x4>, + <0x9058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_UART1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9000 0x1000>; + + uart0: serial@0 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + clock-frequency = <48000000>; + reg = <0x0 0x2000>; + interrupts = <72>; + status = "disabled"; + dmas = <&edma 26 0>, <&edma 27 0>; + dma-names = "tx", "rx"; + }; + }; + + target-module@b000 { /* 0x44e0b000, ap 18 48.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c1"; + reg = <0xb000 0x8>, + <0xb010 0x8>, + <0xb090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_I2C1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb000 0x1000>; + + i2c0: i2c@0 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x1000>; + interrupts = <70>; + status = "disabled"; + }; + }; + + target-module@d000 { /* 0x44e0d000, ap 20 38.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "adc_tsc"; + reg = <0xd000 0x4>, + <0xd010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_ADC_TSC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x0000d000 0x00001000>, + <0x00001000 0x0000e000 0x00001000>; + + tscadc: tscadc@0 { + compatible = "ti,am3359-tscadc"; + reg = <0x0 0x1000>; + interrupts = <16>; + status = "disabled"; + dmas = <&edma 53 0>, <&edma 57 0>; + dma-names = "fifo0", "fifo1"; + + tsc { + compatible = "ti,am3359-tsc"; + }; + am335x_adc: adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; + }; + + target-module@10000 { /* 0x44e10000, ap 22 0c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x10000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00010000 0x00010000>, + <0x00010000 0x00020000 0x00010000>; + + scm: scm@0 { + compatible = "ti,am3-scm", "simple-bus"; + reg = <0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + #pinctrl-cells = <1>; + ranges = <0 0 0x2000>; + + phy_sel: cpsw-phy-sel@650 { + compatible = "ti,am3352-cpsw-phy-sel"; + reg= <0x650 0x4>; + reg-names = "gmii-sel"; + }; + + am33xx_pinmux: pinmux@800 { + compatible = "pinctrl-single"; + reg = <0x800 0x238>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7f>; + }; + + scm_conf: scm_conf@0 { + compatible = "syscon", "simple-bus"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x800>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + wkup_m3_ipc: wkup_m3_ipc@1324 { + compatible = "ti,am3352-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&mailbox &mbox_wkupm3>; + }; + + edma_xbar: dma-router@f90 { + compatible = "ti,am335x-edma-crossbar"; + reg = <0xf90 0x40>; + #dma-cells = <3>; + dma-requests = <32>; + dma-masters = <&edma>; + }; + + scm_clockdomains: clockdomains { + }; + }; + }; + + target-module@31000 { /* 0x44e31000, ap 25 40.0 */ + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + ti,hwmods = "timer1"; + reg = <0x31000 0x4>, + <0x31010 0x4>, + <0x31014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_TIMER1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x31000 0x1000>; + + timer1: timer@0 { + compatible = "ti,am335x-timer-1ms"; + reg = <0x0 0x400>; + interrupts = <67>; + ti,timer-alwon; + clocks = <&timer1_fck>; + clock-names = "fck"; + }; + }; + + target-module@33000 { /* 0x44e33000, ap 27 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x33000 0x1000>; + }; + + target-module@35000 { /* 0x44e35000, ap 29 50.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "wd_timer2"; + reg = <0x35000 0x4>, + <0x35010 0x4>, + <0x35014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_WD_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x35000 0x1000>; + + wdt2: wdt@0 { + compatible = "ti,omap3-wdt"; + reg = <0x0 0x1000>; + interrupts = <91>; + }; + }; + + target-module@37000 { /* 0x44e37000, ap 31 08.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x37000 0x1000>; + }; + + target-module@39000 { /* 0x44e39000, ap 33 02.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x39000 0x1000>; + }; + + target-module@3e000 { /* 0x44e3e000, ap 35 60.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "rtc"; + reg = <0x3e074 0x4>, + <0x3e078 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */ + clocks = <&l4_rtc_clkctrl AM3_L4_RTC_RTC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + + rtc: rtc@0 { + compatible = "ti,am3352-rtc", "ti,da830-rtc"; + reg = <0x0 0x1000>; + interrupts = <75 + 76>; + }; + }; + + target-module@40000 { /* 0x44e40000, ap 38 68.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x40000>; + }; + }; +}; + +&l4_fw { /* 0x47c00000 */ + compatible = "ti,am33xx-l4-fw", "simple-bus"; + reg = <0x47c00000 0x800>, + <0x47c00800 0x800>, + <0x47c01000 0x400>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x47c00000 0x1000000>; /* segment 0 */ + + segment@0 { /* 0x47c00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00000800 0x00000800 0x000800>, /* ap 1 */ + <0x00001000 0x00001000 0x000400>, /* ap 2 */ + <0x0000c000 0x0000c000 0x001000>, /* ap 3 */ + <0x0000d000 0x0000d000 0x001000>, /* ap 4 */ + <0x0000e000 0x0000e000 0x001000>, /* ap 5 */ + <0x0000f000 0x0000f000 0x001000>, /* ap 6 */ + <0x00010000 0x00010000 0x001000>, /* ap 7 */ + <0x00011000 0x00011000 0x001000>, /* ap 8 */ + <0x0001a000 0x0001a000 0x001000>, /* ap 9 */ + <0x0001b000 0x0001b000 0x001000>, /* ap 10 */ + <0x00024000 0x00024000 0x001000>, /* ap 11 */ + <0x00025000 0x00025000 0x001000>, /* ap 12 */ + <0x00026000 0x00026000 0x001000>, /* ap 13 */ + <0x00027000 0x00027000 0x001000>, /* ap 14 */ + <0x00030000 0x00030000 0x001000>, /* ap 15 */ + <0x00031000 0x00031000 0x001000>, /* ap 16 */ + <0x00038000 0x00038000 0x001000>, /* ap 17 */ + <0x00039000 0x00039000 0x001000>, /* ap 18 */ + <0x0003a000 0x0003a000 0x001000>, /* ap 19 */ + <0x0003b000 0x0003b000 0x001000>, /* ap 20 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 21 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 22 */ + <0x0003c000 0x0003c000 0x001000>, /* ap 23 */ + <0x00040000 0x00040000 0x001000>, /* ap 24 */ + <0x00046000 0x00046000 0x001000>, /* ap 25 */ + <0x00047000 0x00047000 0x001000>, /* ap 26 */ + <0x00044000 0x00044000 0x001000>, /* ap 27 */ + <0x00045000 0x00045000 0x001000>, /* ap 28 */ + <0x00028000 0x00028000 0x001000>, /* ap 29 */ + <0x00029000 0x00029000 0x001000>, /* ap 30 */ + <0x00032000 0x00032000 0x001000>, /* ap 31 */ + <0x00033000 0x00033000 0x001000>, /* ap 32 */ + <0x0003d000 0x0003d000 0x001000>, /* ap 33 */ + <0x00041000 0x00041000 0x001000>, /* ap 34 */ + <0x00042000 0x00042000 0x001000>, /* ap 35 */ + <0x00043000 0x00043000 0x001000>, /* ap 36 */ + <0x00014000 0x00014000 0x001000>, /* ap 37 */ + <0x00015000 0x00015000 0x001000>; /* ap 38 */ + + target-module@c000 { /* 0x47c0c000, ap 3 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + }; + + target-module@e000 { /* 0x47c0e000, ap 5 0c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe000 0x1000>; + }; + + target-module@10000 { /* 0x47c10000, ap 7 20.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x1000>; + }; + + target-module@14000 { /* 0x47c14000, ap 37 3c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x14000 0x1000>; + }; + + target-module@1a000 { /* 0x47c1a000, ap 9 08.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1a000 0x1000>; + }; + + target-module@24000 { /* 0x47c24000, ap 11 28.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + }; + + target-module@26000 { /* 0x47c26000, ap 13 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>; + }; + + target-module@28000 { /* 0x47c28000, ap 29 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>; + }; + + target-module@30000 { /* 0x47c30000, ap 15 14.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x30000 0x1000>; + }; + + target-module@32000 { /* 0x47c32000, ap 31 06.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>; + }; + + target-module@38000 { /* 0x47c38000, ap 17 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x38000 0x1000>; + }; + + target-module@3a000 { /* 0x47c3a000, ap 19 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3a000 0x1000>; + }; + + target-module@3c000 { /* 0x47c3c000, ap 23 38.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3c000 0x1000>; + }; + + target-module@3e000 { /* 0x47c3e000, ap 21 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + }; + + target-module@40000 { /* 0x47c40000, ap 24 02.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x1000>; + }; + + target-module@42000 { /* 0x47c42000, ap 35 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x42000 0x1000>; + }; + + target-module@44000 { /* 0x47c44000, ap 27 24.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x44000 0x1000>; + }; + + target-module@46000 { /* 0x47c46000, ap 25 2c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x46000 0x1000>; + }; + }; +}; + +&l4_fast { /* 0x4a000000 */ + compatible = "ti,am33xx-l4-fast", "simple-bus"; + reg = <0x4a000000 0x800>, + <0x4a000800 0x800>, + <0x4a001000 0x400>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4a000000 0x1000000>; /* segment 0 */ + + segment@0 { /* 0x4a000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00000800 0x00000800 0x000800>, /* ap 1 */ + <0x00001000 0x00001000 0x000400>, /* ap 2 */ + <0x00100000 0x00100000 0x008000>, /* ap 3 */ + <0x00108000 0x00108000 0x001000>, /* ap 4 */ + <0x00180000 0x00180000 0x020000>, /* ap 5 */ + <0x001a0000 0x001a0000 0x001000>, /* ap 6 */ + <0x00200000 0x00200000 0x080000>, /* ap 7 */ + <0x00280000 0x00280000 0x001000>, /* ap 8 */ + <0x00300000 0x00300000 0x080000>, /* ap 9 */ + <0x00380000 0x00380000 0x001000>; /* ap 10 */ + + target-module@100000 { /* 0x4a100000, ap 3 08.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "cpgmac0"; + reg = <0x101200 0x4>, + <0x101208 0x4>, + <0x101204 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <0>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,syss-mask = <1>; + clocks = <&cpsw_125mhz_clkctrl AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x100000 0x8000>; + + mac: ethernet@0 { + compatible = "ti,am335x-cpsw","ti,cpsw"; + clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; + clock-names = "fck", "cpts"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + mac_control = <0x20>; + slaves = <2>; + active_slave = <0>; + cpts_clock_mult = <0x80000000>; + cpts_clock_shift = <29>; + reg = <0x0 0x800 + 0x1200 0x100>; + #address-cells = <1>; + #size-cells = <1>; + /* + * c0_rx_thresh_pend + * c0_rx_pend + * c0_tx_pend + * c0_misc_pend + */ + interrupts = <40 41 42 43>; + ranges = <0 0 0x8000>; + syscon = <&scm_conf>; + cpsw-phy-sel = <&phy_sel>; + status = "disabled"; + + davinci_mdio: mdio@1000 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + reg = <0x1000 0x100>; + status = "disabled"; + }; + + cpsw_emac0: slave@200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + cpsw_emac1: slave@300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + }; + + target-module@180000 { /* 0x4a180000, ap 5 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x180000 0x20000>; + }; + + target-module@200000 { /* 0x4a200000, ap 7 02.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x200000 0x80000>; + }; + + target-module@300000 { /* 0x4a300000, ap 9 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x300000 0x80000>; + }; + }; +}; + +&l4_mpuss { /* 0x4b140000 */ + compatible = "ti,am33xx-l4-mpuss", "simple-bus"; + reg = <0x4b144400 0x100>, + <0x4b144800 0x400>; + reg-names = "la", "ap"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4b140000 0x008000>; /* segment 0 */ + + segment@0 { /* 0x4b140000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00004800 0x00004800 0x000400>, /* ap 0 */ + <0x00001000 0x00001000 0x001000>, /* ap 1 */ + <0x00002000 0x00002000 0x001000>, /* ap 2 */ + <0x00004000 0x00004000 0x000400>, /* ap 3 */ + <0x00005000 0x00005000 0x000400>, /* ap 4 */ + <0x00000000 0x00000000 0x001000>, /* ap 5 */ + <0x00003000 0x00003000 0x001000>, /* ap 6 */ + <0x00000800 0x00000800 0x000800>; /* ap 7 */ + + target-module@0 { /* 0x4b140000, ap 5 02.2 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x00001000>, + <0x00001000 0x00001000 0x00001000>, + <0x00002000 0x00002000 0x00001000>; + }; + + target-module@3000 { /* 0x4b143000, ap 6 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3000 0x1000>; + }; + }; +}; + +&l4_per { /* 0x48000000 */ + compatible = "ti,am33xx-l4-per", "simple-bus"; + reg = <0x48000000 0x800>, + <0x48000800 0x800>, + <0x48001000 0x400>, + <0x48001400 0x400>, + <0x48001800 0x400>, + <0x48001c00 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x48000000 0x100000>, /* segment 0 */ + <0x00100000 0x48100000 0x100000>, /* segment 1 */ + <0x00200000 0x48200000 0x100000>, /* segment 2 */ + <0x00300000 0x48300000 0x100000>, /* segment 3 */ + <0x46000000 0x46000000 0x400000>, /* l3 data port */ + <0x46400000 0x46400000 0x400000>; /* l3 data port */ + + segment@0 { /* 0x48000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00000800 0x00000800 0x000800>, /* ap 1 */ + <0x00001000 0x00001000 0x000400>, /* ap 2 */ + <0x00001400 0x00001400 0x000400>, /* ap 3 */ + <0x00001800 0x00001800 0x000400>, /* ap 4 */ + <0x00001c00 0x00001c00 0x000400>, /* ap 5 */ + <0x00008000 0x00008000 0x001000>, /* ap 6 */ + <0x00009000 0x00009000 0x001000>, /* ap 7 */ + <0x00016000 0x00016000 0x001000>, /* ap 8 */ + <0x00017000 0x00017000 0x001000>, /* ap 9 */ + <0x00022000 0x00022000 0x001000>, /* ap 10 */ + <0x00023000 0x00023000 0x001000>, /* ap 11 */ + <0x00024000 0x00024000 0x001000>, /* ap 12 */ + <0x00025000 0x00025000 0x001000>, /* ap 13 */ + <0x0002a000 0x0002a000 0x001000>, /* ap 14 */ + <0x0002b000 0x0002b000 0x001000>, /* ap 15 */ + <0x00038000 0x00038000 0x002000>, /* ap 16 */ + <0x0003a000 0x0003a000 0x001000>, /* ap 17 */ + <0x00014000 0x00014000 0x001000>, /* ap 18 */ + <0x00015000 0x00015000 0x001000>, /* ap 19 */ + <0x0003c000 0x0003c000 0x002000>, /* ap 20 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 21 */ + <0x00040000 0x00040000 0x001000>, /* ap 22 */ + <0x00041000 0x00041000 0x001000>, /* ap 23 */ + <0x00042000 0x00042000 0x001000>, /* ap 24 */ + <0x00043000 0x00043000 0x001000>, /* ap 25 */ + <0x00044000 0x00044000 0x001000>, /* ap 26 */ + <0x00045000 0x00045000 0x001000>, /* ap 27 */ + <0x00046000 0x00046000 0x001000>, /* ap 28 */ + <0x00047000 0x00047000 0x001000>, /* ap 29 */ + <0x00048000 0x00048000 0x001000>, /* ap 30 */ + <0x00049000 0x00049000 0x001000>, /* ap 31 */ + <0x0004c000 0x0004c000 0x001000>, /* ap 32 */ + <0x0004d000 0x0004d000 0x001000>, /* ap 33 */ + <0x00050000 0x00050000 0x002000>, /* ap 34 */ + <0x00052000 0x00052000 0x001000>, /* ap 35 */ + <0x00060000 0x00060000 0x001000>, /* ap 36 */ + <0x00061000 0x00061000 0x001000>, /* ap 37 */ + <0x00080000 0x00080000 0x010000>, /* ap 38 */ + <0x00090000 0x00090000 0x001000>, /* ap 39 */ + <0x000a0000 0x000a0000 0x010000>, /* ap 40 */ + <0x000b0000 0x000b0000 0x001000>, /* ap 41 */ + <0x00030000 0x00030000 0x001000>, /* ap 77 */ + <0x00031000 0x00031000 0x001000>, /* ap 78 */ + <0x0004a000 0x0004a000 0x001000>, /* ap 85 */ + <0x0004b000 0x0004b000 0x001000>, /* ap 86 */ + <0x000c8000 0x000c8000 0x001000>, /* ap 87 */ + <0x000c9000 0x000c9000 0x001000>, /* ap 88 */ + <0x000cc000 0x000cc000 0x001000>, /* ap 89 */ + <0x000cd000 0x000cd000 0x001000>, /* ap 90 */ + <0x000ca000 0x000ca000 0x001000>, /* ap 91 */ + <0x000cb000 0x000cb000 0x001000>, /* ap 92 */ + <0x46000000 0x46000000 0x400000>, /* l3 data port */ + <0x46400000 0x46400000 0x400000>; /* l3 data port */ + + target-module@8000 { /* 0x48008000, ap 6 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + }; + + target-module@14000 { /* 0x48014000, ap 18 58.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x14000 0x1000>; + }; + + target-module@16000 { /* 0x48016000, ap 8 3c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x16000 0x1000>; + }; + + target-module@22000 { /* 0x48022000, ap 10 12.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart2"; + reg = <0x22050 0x4>, + <0x22054 0x4>, + <0x22058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>; + + uart1: serial@0 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + clock-frequency = <48000000>; + reg = <0x0 0x2000>; + interrupts = <73>; + status = "disabled"; + dmas = <&edma 28 0>, <&edma 29 0>; + dma-names = "tx", "rx"; + }; + }; + + target-module@24000 { /* 0x48024000, ap 12 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart3"; + reg = <0x24050 0x4>, + <0x24054 0x4>, + <0x24058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_UART3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + uart2: serial@0 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + clock-frequency = <48000000>; + reg = <0x0 0x2000>; + interrupts = <74>; + status = "disabled"; + dmas = <&edma 30 0>, <&edma 31 0>; + dma-names = "tx", "rx"; + }; + }; + + target-module@2a000 { /* 0x4802a000, ap 14 2a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c2"; + reg = <0x2a000 0x8>, + <0x2a010 0x8>, + <0x2a090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_I2C2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>; + + i2c1: i2c@0 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x1000>; + interrupts = <71>; + status = "disabled"; + }; + }; + + target-module@30000 { /* 0x48030000, ap 77 08.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spi0"; + reg = <0x30000 0x4>, + <0x30110 0x4>, + <0x30114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_SPI0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x30000 0x1000>; + + spi0: spi@0 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x400>; + interrupts = <65>; + ti,spi-num-cs = <2>; + dmas = <&edma 16 0 + &edma 17 0 + &edma 18 0 + &edma 19 0>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + status = "disabled"; + }; + }; + + target-module@38000 { /* 0x48038000, ap 16 02.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "mcasp0"; + reg = <0x38000 0x4>, + <0x38004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): per_pwrdm, l3s_clkdm */ + clocks = <&l3s_clkctrl AM3_L3S_MCASP0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x38000 0x2000>, + <0x46000000 0x46000000 0x400000>; + + mcasp0: mcasp@0 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x2000>, + <0x46000000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <80>, <81>; + interrupt-names = "tx", "rx"; + status = "disabled"; + dmas = <&edma 8 2>, + <&edma 9 2>; + dma-names = "tx", "rx"; + }; + }; + + target-module@3c000 { /* 0x4803c000, ap 20 32.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "mcasp1"; + reg = <0x3c000 0x4>, + <0x3c004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): per_pwrdm, l3s_clkdm */ + clocks = <&l3s_clkctrl AM3_L3S_MCASP1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3c000 0x2000>, + <0x46400000 0x46400000 0x400000>; + + mcasp1: mcasp@0 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x2000>, + <0x46400000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <82>, <83>; + interrupt-names = "tx", "rx"; + status = "disabled"; + dmas = <&edma 10 2>, + <&edma 11 2>; + dma-names = "tx", "rx"; + }; + }; + + target-module@40000 { /* 0x48040000, ap 22 1e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer2"; + reg = <0x40000 0x4>, + <0x40010 0x4>, + <0x40014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x1000>; + + timer2: timer@0 { + compatible = "ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <68>; + clocks = <&timer2_fck>; + clock-names = "fck"; + }; + }; + + target-module@42000 { /* 0x48042000, ap 24 1c.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer3"; + reg = <0x42000 0x4>, + <0x42010 0x4>, + <0x42014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x42000 0x1000>; + + timer3: timer@0 { + compatible = "ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <69>; + }; + }; + + target-module@44000 { /* 0x48044000, ap 26 26.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer4"; + reg = <0x44000 0x4>, + <0x44010 0x4>, + <0x44014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_TIMER4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x44000 0x1000>; + + timer4: timer@0 { + compatible = "ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <92>; + ti,timer-pwm; + }; + }; + + target-module@46000 { /* 0x48046000, ap 28 28.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer5"; + reg = <0x46000 0x4>, + <0x46010 0x4>, + <0x46014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_TIMER5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x46000 0x1000>; + + timer5: timer@0 { + compatible = "ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <93>; + ti,timer-pwm; + }; + }; + + target-module@48000 { /* 0x48048000, ap 30 22.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer6"; + reg = <0x48000 0x4>, + <0x48010 0x4>, + <0x48014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_TIMER6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x48000 0x1000>; + + timer6: timer@0 { + compatible = "ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <94>; + ti,timer-pwm; + }; + }; + + target-module@4a000 { /* 0x4804a000, ap 85 60.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer7"; + reg = <0x4a000 0x4>, + <0x4a010 0x4>, + <0x4a014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_TIMER7_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4a000 0x1000>; + + timer7: timer@0 { + compatible = "ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <95>; + ti,timer-pwm; + }; + }; + + target-module@4c000 { /* 0x4804c000, ap 32 36.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio2"; + reg = <0x4c000 0x4>, + <0x4c010 0x4>, + <0x4c114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_GPIO2_CLKCTRL 0>, + <&l4ls_clkctrl AM3_L4LS_GPIO2_CLKCTRL 18>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4c000 0x1000>; + + gpio1: gpio@0 { + compatible = "ti,omap4-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x1000>; + interrupts = <98>; + }; + }; + + target-module@50000 { /* 0x48050000, ap 34 2c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x50000 0x2000>; + }; + + target-module@60000 { /* 0x48060000, ap 36 0c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mmc1"; + reg = <0x602fc 0x4>, + <0x60110 0x4>, + <0x60114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_MMC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + + mmc1: mmc@0 { + compatible = "ti,omap4-hsmmc"; + ti,dual-volt; + ti,needs-special-reset; + ti,needs-special-hs-handling; + dmas = <&edma_xbar 24 0 0 + &edma_xbar 25 0 0>; + dma-names = "tx", "rx"; + interrupts = <64>; + reg = <0x0 0x1000>; + status = "disabled"; + }; + }; + + target-module@80000 { /* 0x48080000, ap 38 18.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "elm"; + reg = <0x80000 0x4>, + <0x80010 0x4>, + <0x80014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_ELM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + elm: elm@0 { + compatible = "ti,am3352-elm"; + reg = <0x0 0x2000>; + interrupts = <4>; + status = "disabled"; + }; + }; + + target-module@a0000 { /* 0x480a0000, ap 40 5e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa0000 0x10000>; + }; + + target-module@c8000 { /* 0x480c8000, ap 87 06.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox"; + reg = <0xc8000 0x4>, + <0xc8010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_MAILBOX_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc8000 0x1000>; + + mailbox: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <77>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <8>; + mbox_wkupm3: wkup_m3 { + ti,mbox-send-noirq; + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + }; + }; + }; + + target-module@ca000 { /* 0x480ca000, ap 91 40.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spinlock"; + reg = <0xca000 0x4>, + <0xca010 0x4>, + <0xca014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_SPINLOCK_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xca000 0x1000>; + + hwspinlock: spinlock@0 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x0 0x1000>; + #hwlock-cells = <1>; + }; + }; + + target-module@cc000 { /* 0x480cc000, ap 89 0e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xcc000 0x1000>; + }; + }; + + segment@100000 { /* 0x48100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0008c000 0x0018c000 0x001000>, /* ap 42 */ + <0x0008d000 0x0018d000 0x001000>, /* ap 43 */ + <0x0008e000 0x0018e000 0x001000>, /* ap 44 */ + <0x0008f000 0x0018f000 0x001000>, /* ap 45 */ + <0x0009c000 0x0019c000 0x001000>, /* ap 46 */ + <0x0009d000 0x0019d000 0x001000>, /* ap 47 */ + <0x000a6000 0x001a6000 0x001000>, /* ap 48 */ + <0x000a7000 0x001a7000 0x001000>, /* ap 49 */ + <0x000a8000 0x001a8000 0x001000>, /* ap 50 */ + <0x000a9000 0x001a9000 0x001000>, /* ap 51 */ + <0x000aa000 0x001aa000 0x001000>, /* ap 52 */ + <0x000ab000 0x001ab000 0x001000>, /* ap 53 */ + <0x000ac000 0x001ac000 0x001000>, /* ap 54 */ + <0x000ad000 0x001ad000 0x001000>, /* ap 55 */ + <0x000ae000 0x001ae000 0x001000>, /* ap 56 */ + <0x000af000 0x001af000 0x001000>, /* ap 57 */ + <0x000b0000 0x001b0000 0x010000>, /* ap 58 */ + <0x000c0000 0x001c0000 0x001000>, /* ap 59 */ + <0x000cc000 0x001cc000 0x002000>, /* ap 60 */ + <0x000ce000 0x001ce000 0x002000>, /* ap 61 */ + <0x000d0000 0x001d0000 0x002000>, /* ap 62 */ + <0x000d2000 0x001d2000 0x002000>, /* ap 63 */ + <0x000d8000 0x001d8000 0x001000>, /* ap 64 */ + <0x000d9000 0x001d9000 0x001000>, /* ap 65 */ + <0x000a0000 0x001a0000 0x001000>, /* ap 79 */ + <0x000a1000 0x001a1000 0x001000>, /* ap 80 */ + <0x000a2000 0x001a2000 0x001000>, /* ap 81 */ + <0x000a3000 0x001a3000 0x001000>, /* ap 82 */ + <0x000a4000 0x001a4000 0x001000>, /* ap 83 */ + <0x000a5000 0x001a5000 0x001000>; /* ap 84 */ + + target-module@8c000 { /* 0x4818c000, ap 42 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8c000 0x1000>; + }; + + target-module@8e000 { /* 0x4818e000, ap 44 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8e000 0x1000>; + }; + + target-module@9c000 { /* 0x4819c000, ap 46 5a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c3"; + reg = <0x9c000 0x8>, + <0x9c010 0x8>, + <0x9c090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_I2C3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9c000 0x1000>; + + i2c2: i2c@0 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x1000>; + interrupts = <30>; + status = "disabled"; + }; + }; + + target-module@a0000 { /* 0x481a0000, ap 79 24.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spi1"; + reg = <0xa0000 0x4>, + <0xa0110 0x4>, + <0xa0114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_SPI1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa0000 0x1000>; + + spi1: spi@0 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x400>; + interrupts = <125>; + ti,spi-num-cs = <2>; + dmas = <&edma 42 0 + &edma 43 0 + &edma 44 0 + &edma 45 0>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + status = "disabled"; + }; + }; + + target-module@a2000 { /* 0x481a2000, ap 81 2e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa2000 0x1000>; + }; + + target-module@a4000 { /* 0x481a4000, ap 83 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa4000 0x1000>; + }; + + target-module@a6000 { /* 0x481a6000, ap 48 16.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart4"; + reg = <0xa6050 0x4>, + <0xa6054 0x4>, + <0xa6058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_UART4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa6000 0x1000>; + + uart3: serial@0 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + clock-frequency = <48000000>; + reg = <0x0 0x2000>; + interrupts = <44>; + status = "disabled"; + }; + }; + + target-module@a8000 { /* 0x481a8000, ap 50 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart5"; + reg = <0xa8050 0x4>, + <0xa8054 0x4>, + <0xa8058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_UART5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa8000 0x1000>; + + uart4: serial@0 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + clock-frequency = <48000000>; + reg = <0x0 0x2000>; + interrupts = <45>; + status = "disabled"; + }; + }; + + target-module@aa000 { /* 0x481aa000, ap 52 1a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart6"; + reg = <0xaa050 0x4>, + <0xaa054 0x4>, + <0xaa058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_UART6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xaa000 0x1000>; + + uart5: serial@0 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + clock-frequency = <48000000>; + reg = <0x0 0x2000>; + interrupts = <46>; + status = "disabled"; + }; + }; + + target-module@ac000 { /* 0x481ac000, ap 54 38.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio3"; + reg = <0xac000 0x4>, + <0xac010 0x4>, + <0xac114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_GPIO3_CLKCTRL 0>, + <&l4ls_clkctrl AM3_L4LS_GPIO3_CLKCTRL 18>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xac000 0x1000>; + + gpio2: gpio@0 { + compatible = "ti,omap4-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x1000>; + interrupts = <32>; + }; + }; + + target-module@ae000 { /* 0x481ae000, ap 56 3a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio4"; + reg = <0xae000 0x4>, + <0xae010 0x4>, + <0xae114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_GPIO4_CLKCTRL 0>, + <&l4ls_clkctrl AM3_L4LS_GPIO4_CLKCTRL 18>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xae000 0x1000>; + + gpio3: gpio@0 { + compatible = "ti,omap4-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x1000>; + interrupts = <62>; + }; + }; + + target-module@b0000 { /* 0x481b0000, ap 58 50.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb0000 0x10000>; + }; + + target-module@cc000 { /* 0x481cc000, ap 60 46.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "d_can0"; + reg = <0xcc000 0x4>; + reg-names = "rev"; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_D_CAN0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xcc000 0x2000>; + + dcan0: can@0 { + compatible = "ti,am3352-d_can"; + reg = <0x0 0x2000>; + clocks = <&dcan0_fck>; + clock-names = "fck"; + syscon-raminit = <&scm_conf 0x644 0>; + interrupts = <52>; + status = "disabled"; + }; + }; + + target-module@d0000 { /* 0x481d0000, ap 62 42.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "d_can1"; + reg = <0xd0000 0x4>; + reg-names = "rev"; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_D_CAN1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd0000 0x2000>; + + dcan1: can@0 { + compatible = "ti,am3352-d_can"; + reg = <0x0 0x2000>; + clocks = <&dcan1_fck>; + clock-names = "fck"; + syscon-raminit = <&scm_conf 0x644 1>; + interrupts = <55>; + status = "disabled"; + }; + }; + + target-module@d8000 { /* 0x481d8000, ap 64 66.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mmc2"; + reg = <0xd82fc 0x4>, + <0xd8110 0x4>, + <0xd8114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_MMC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd8000 0x1000>; + + mmc2: mmc@0 { + compatible = "ti,omap4-hsmmc"; + ti,needs-special-reset; + dmas = <&edma 2 0 + &edma 3 0>; + dma-names = "tx", "rx"; + interrupts = <28>; + reg = <0x0 0x1000>; + status = "disabled"; + }; + }; + }; + + segment@200000 { /* 0x48200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; + + segment@300000 { /* 0x48300000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00300000 0x001000>, /* ap 66 */ + <0x00001000 0x00301000 0x001000>, /* ap 67 */ + <0x00002000 0x00302000 0x001000>, /* ap 68 */ + <0x00003000 0x00303000 0x001000>, /* ap 69 */ + <0x00004000 0x00304000 0x001000>, /* ap 70 */ + <0x00005000 0x00305000 0x001000>, /* ap 71 */ + <0x0000e000 0x0030e000 0x001000>, /* ap 72 */ + <0x0000f000 0x0030f000 0x001000>, /* ap 73 */ + <0x00018000 0x00318000 0x004000>, /* ap 74 */ + <0x0001c000 0x0031c000 0x001000>, /* ap 75 */ + <0x00010000 0x00310000 0x002000>, /* ap 76 */ + <0x00012000 0x00312000 0x001000>, /* ap 93 */ + <0x00015000 0x00315000 0x001000>, /* ap 94 */ + <0x00016000 0x00316000 0x001000>, /* ap 95 */ + <0x00017000 0x00317000 0x001000>, /* ap 96 */ + <0x00013000 0x00313000 0x001000>, /* ap 97 */ + <0x00014000 0x00314000 0x001000>, /* ap 98 */ + <0x00020000 0x00320000 0x001000>, /* ap 99 */ + <0x00021000 0x00321000 0x001000>, /* ap 100 */ + <0x00022000 0x00322000 0x001000>, /* ap 101 */ + <0x00023000 0x00323000 0x001000>, /* ap 102 */ + <0x00024000 0x00324000 0x001000>, /* ap 103 */ + <0x00025000 0x00325000 0x001000>; /* ap 104 */ + + target-module@0 { /* 0x48300000, ap 66 48.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss0"; + reg = <0x0 0x4>, + <0x4 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + epwmss0: epwmss@0 { + compatible = "ti,am33xx-pwmss"; + reg = <0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0 0 0x1000>; + + ecap0: ecap@100 { + compatible = "ti,am3352-ecap", + "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + interrupts = <31>; + interrupt-names = "ecap0"; + status = "disabled"; + }; + + ehrpwm0: pwm@200 { + compatible = "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@2000 { /* 0x48302000, ap 68 52.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss1"; + reg = <0x2000 0x4>, + <0x2004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + + epwmss1: epwmss@0 { + compatible = "ti,am33xx-pwmss"; + reg = <0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0 0 0x1000>; + + ecap1: ecap@100 { + compatible = "ti,am3352-ecap", + "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + interrupts = <47>; + interrupt-names = "ecap1"; + status = "disabled"; + }; + + ehrpwm1: pwm@200 { + compatible = "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@4000 { /* 0x48304000, ap 70 44.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss2"; + reg = <0x4000 0x4>, + <0x4004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + epwmss2: epwmss@0 { + compatible = "ti,am33xx-pwmss"; + reg = <0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0 0 0x1000>; + + ecap2: ecap@100 { + compatible = "ti,am3352-ecap", + "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + interrupts = <61>; + interrupt-names = "ecap2"; + status = "disabled"; + }; + + ehrpwm2: pwm@200 { + compatible = "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@e000 { /* 0x4830e000, ap 72 4a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "lcdc"; + reg = <0xe000 0x4>, + <0xe054 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle ; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): per_pwrdm, lcdc_clkdm */ + clocks = <&lcdc_clkctrl AM3_LCDC_LCDC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe000 0x1000>; + + lcdc: lcdc@0 { + compatible = "ti,am33xx-tilcdc"; + reg = <0x0 0x1000>; + interrupts = <36>; + status = "disabled"; + }; + }; + + target-module@10000 { /* 0x48310000, ap 76 4e.1 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "rng"; + reg = <0x11fe0 0x4>, + <0x11fe4 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_RNG_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x2000>; + + rng: rng@0 { + compatible = "ti,omap4-rng"; + reg = <0x0 0x2000>; + interrupts = <111>; + }; + }; + + target-module@13000 { /* 0x48313000, ap 97 62.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x13000 0x1000>; + }; + + target-module@15000 { /* 0x48315000, ap 94 56.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00015000 0x00001000>, + <0x00001000 0x00016000 0x00001000>; + }; + + target-module@18000 { /* 0x48318000, ap 74 4c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000 0x4000>; + }; + + target-module@20000 { /* 0x48320000, ap 99 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + }; + + target-module@22000 { /* 0x48322000, ap 101 3e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>; + }; + + target-module@24000 { /* 0x48324000, ap 103 68.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + }; + }; +}; + diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index d3dd6a16e70a..e5c2f71a7c77 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -8,6 +8,7 @@ * kind, whether express or implied. */ +#include <dt-bindings/bus/ti-sysc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/am33xx.h> #include <dt-bindings/clock/am3.h> @@ -166,87 +167,23 @@ ranges; ti,hwmods = "l3_main"; - l4_wkup: l4_wkup@44c00000 { - compatible = "ti,am3-l4-wkup", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x44c00000 0x280000>; - + l4_wkup: interconnect@44c00000 { wkup_m3: wkup_m3@100000 { compatible = "ti,am3352-wkup-m3"; reg = <0x100000 0x4000>, - <0x180000 0x2000>; + <0x180000 0x2000>; reg-names = "umem", "dmem"; ti,hwmods = "wkup_m3"; ti,pm-firmware = "am335x-pm-firmware.elf"; }; - - prcm: prcm@200000 { - compatible = "ti,am3-prcm", "simple-bus"; - reg = <0x200000 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x200000 0x4000>; - - prcm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - prcm_clockdomains: clockdomains { - }; - }; - - scm: scm@210000 { - compatible = "ti,am3-scm", "simple-bus"; - reg = <0x210000 0x2000>; - #address-cells = <1>; - #size-cells = <1>; - #pinctrl-cells = <1>; - ranges = <0 0x210000 0x2000>; - - am33xx_pinmux: pinmux@800 { - compatible = "pinctrl-single"; - reg = <0x800 0x238>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x7f>; - }; - - scm_conf: scm_conf@0 { - compatible = "syscon", "simple-bus"; - reg = <0x0 0x800>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0x800>; - - scm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - wkup_m3_ipc: wkup_m3_ipc@1324 { - compatible = "ti,am3352-wkup-m3-ipc"; - reg = <0x1324 0x24>; - interrupts = <78>; - ti,rproc = <&wkup_m3>; - mboxes = <&mailbox &mbox_wkupm3>; - }; - - edma_xbar: dma-router@f90 { - compatible = "ti,am335x-edma-crossbar"; - reg = <0xf90 0x40>; - #dma-cells = <3>; - dma-requests = <32>; - dma-masters = <&edma>; - }; - - scm_clockdomains: clockdomains { - }; - }; + }; + l4_per: interconnect@48000000 { + }; + l4_fw: interconnect@47c00000 { + }; + l4_fast: interconnect@4a000000 { + }; + l4_mpuss: interconnect@4b140000 { }; intc: interrupt-controller@48200000 { @@ -297,166 +234,6 @@ interrupt-names = "edma3_tcerrint"; }; - gpio0: gpio@44e07000 { - compatible = "ti,omap4-gpio"; - ti,hwmods = "gpio1"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x44e07000 0x1000>; - interrupts = <96>; - }; - - gpio1: gpio@4804c000 { - compatible = "ti,omap4-gpio"; - ti,hwmods = "gpio2"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4804c000 0x1000>; - interrupts = <98>; - }; - - gpio2: gpio@481ac000 { - compatible = "ti,omap4-gpio"; - ti,hwmods = "gpio3"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x481ac000 0x1000>; - interrupts = <32>; - }; - - gpio3: gpio@481ae000 { - compatible = "ti,omap4-gpio"; - ti,hwmods = "gpio4"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x481ae000 0x1000>; - interrupts = <62>; - }; - - uart0: serial@44e09000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart1"; - clock-frequency = <48000000>; - reg = <0x44e09000 0x2000>; - interrupts = <72>; - status = "disabled"; - dmas = <&edma 26 0>, <&edma 27 0>; - dma-names = "tx", "rx"; - }; - - uart1: serial@48022000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart2"; - clock-frequency = <48000000>; - reg = <0x48022000 0x2000>; - interrupts = <73>; - status = "disabled"; - dmas = <&edma 28 0>, <&edma 29 0>; - dma-names = "tx", "rx"; - }; - - uart2: serial@48024000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart3"; - clock-frequency = <48000000>; - reg = <0x48024000 0x2000>; - interrupts = <74>; - status = "disabled"; - dmas = <&edma 30 0>, <&edma 31 0>; - dma-names = "tx", "rx"; - }; - - uart3: serial@481a6000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - reg = <0x481a6000 0x2000>; - interrupts = <44>; - status = "disabled"; - }; - - uart4: serial@481a8000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart5"; - clock-frequency = <48000000>; - reg = <0x481a8000 0x2000>; - interrupts = <45>; - status = "disabled"; - }; - - uart5: serial@481aa000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart6"; - clock-frequency = <48000000>; - reg = <0x481aa000 0x2000>; - interrupts = <46>; - status = "disabled"; - }; - - i2c0: i2c@44e0b000 { - compatible = "ti,omap4-i2c"; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c1"; - reg = <0x44e0b000 0x1000>; - interrupts = <70>; - status = "disabled"; - }; - - i2c1: i2c@4802a000 { - compatible = "ti,omap4-i2c"; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c2"; - reg = <0x4802a000 0x1000>; - interrupts = <71>; - status = "disabled"; - }; - - i2c2: i2c@4819c000 { - compatible = "ti,omap4-i2c"; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c3"; - reg = <0x4819c000 0x1000>; - interrupts = <30>; - status = "disabled"; - }; - - mmc1: mmc@48060000 { - compatible = "ti,omap4-hsmmc"; - ti,hwmods = "mmc1"; - ti,dual-volt; - ti,needs-special-reset; - ti,needs-special-hs-handling; - dmas = <&edma_xbar 24 0 0 - &edma_xbar 25 0 0>; - dma-names = "tx", "rx"; - interrupts = <64>; - reg = <0x48060000 0x1000>; - status = "disabled"; - }; - - mmc2: mmc@481d8000 { - compatible = "ti,omap4-hsmmc"; - ti,hwmods = "mmc2"; - ti,needs-special-reset; - dmas = <&edma 2 0 - &edma 3 0>; - dma-names = "tx", "rx"; - interrupts = <28>; - reg = <0x481d8000 0x1000>; - status = "disabled"; - }; - mmc3: mmc@47810000 { compatible = "ti,omap4-hsmmc"; ti,hwmods = "mmc3"; @@ -466,157 +243,6 @@ status = "disabled"; }; - hwspinlock: spinlock@480ca000 { - compatible = "ti,omap4-hwspinlock"; - reg = <0x480ca000 0x1000>; - ti,hwmods = "spinlock"; - #hwlock-cells = <1>; - }; - - wdt2: wdt@44e35000 { - compatible = "ti,omap3-wdt"; - ti,hwmods = "wd_timer2"; - reg = <0x44e35000 0x1000>; - interrupts = <91>; - }; - - dcan0: can@481cc000 { - compatible = "ti,am3352-d_can"; - ti,hwmods = "d_can0"; - reg = <0x481cc000 0x2000>; - clocks = <&dcan0_fck>; - clock-names = "fck"; - syscon-raminit = <&scm_conf 0x644 0>; - interrupts = <52>; - status = "disabled"; - }; - - dcan1: can@481d0000 { - compatible = "ti,am3352-d_can"; - ti,hwmods = "d_can1"; - reg = <0x481d0000 0x2000>; - clocks = <&dcan1_fck>; - clock-names = "fck"; - syscon-raminit = <&scm_conf 0x644 1>; - interrupts = <55>; - status = "disabled"; - }; - - mailbox: mailbox@480c8000 { - compatible = "ti,omap4-mailbox"; - reg = <0x480C8000 0x200>; - interrupts = <77>; - ti,hwmods = "mailbox"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <8>; - mbox_wkupm3: wkup_m3 { - ti,mbox-send-noirq; - ti,mbox-tx = <0 0 0>; - ti,mbox-rx = <0 0 3>; - }; - }; - - timer1: timer@44e31000 { - compatible = "ti,am335x-timer-1ms"; - reg = <0x44e31000 0x400>; - interrupts = <67>; - ti,hwmods = "timer1"; - ti,timer-alwon; - clocks = <&timer1_fck>; - clock-names = "fck"; - }; - - timer2: timer@48040000 { - compatible = "ti,am335x-timer"; - reg = <0x48040000 0x400>; - interrupts = <68>; - ti,hwmods = "timer2"; - clocks = <&timer2_fck>; - clock-names = "fck"; - }; - - timer3: timer@48042000 { - compatible = "ti,am335x-timer"; - reg = <0x48042000 0x400>; - interrupts = <69>; - ti,hwmods = "timer3"; - }; - - timer4: timer@48044000 { - compatible = "ti,am335x-timer"; - reg = <0x48044000 0x400>; - interrupts = <92>; - ti,hwmods = "timer4"; - ti,timer-pwm; - }; - - timer5: timer@48046000 { - compatible = "ti,am335x-timer"; - reg = <0x48046000 0x400>; - interrupts = <93>; - ti,hwmods = "timer5"; - ti,timer-pwm; - }; - - timer6: timer@48048000 { - compatible = "ti,am335x-timer"; - reg = <0x48048000 0x400>; - interrupts = <94>; - ti,hwmods = "timer6"; - ti,timer-pwm; - }; - - timer7: timer@4804a000 { - compatible = "ti,am335x-timer"; - reg = <0x4804a000 0x400>; - interrupts = <95>; - ti,hwmods = "timer7"; - ti,timer-pwm; - }; - - rtc: rtc@44e3e000 { - compatible = "ti,am3352-rtc", "ti,da830-rtc"; - reg = <0x44e3e000 0x1000>; - interrupts = <75 - 76>; - ti,hwmods = "rtc"; - clocks = <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; - clock-names = "int-clk"; - }; - - spi0: spi@48030000 { - compatible = "ti,omap4-mcspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x48030000 0x400>; - interrupts = <65>; - ti,spi-num-cs = <2>; - ti,hwmods = "spi0"; - dmas = <&edma 16 0 - &edma 17 0 - &edma 18 0 - &edma 19 0>; - dma-names = "tx0", "rx0", "tx1", "rx1"; - status = "disabled"; - }; - - spi1: spi@481a0000 { - compatible = "ti,omap4-mcspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x481a0000 0x400>; - interrupts = <125>; - ti,spi-num-cs = <2>; - ti,hwmods = "spi1"; - dmas = <&edma 42 0 - &edma 43 0 - &edma 44 0 - &edma 45 0>; - dma-names = "tx0", "rx0", "tx1", "rx1"; - status = "disabled"; - }; - usb: usb@47400000 { compatible = "ti,am33xx-usb"; reg = <0x47400000 0x1000>; @@ -747,163 +373,6 @@ }; }; - epwmss0: epwmss@48300000 { - compatible = "ti,am33xx-pwmss"; - reg = <0x48300000 0x10>; - ti,hwmods = "epwmss0"; - #address-cells = <1>; - #size-cells = <1>; - status = "disabled"; - ranges = <0x48300100 0x48300100 0x80 /* ECAP */ - 0x48300180 0x48300180 0x80 /* EQEP */ - 0x48300200 0x48300200 0x80>; /* EHRPWM */ - - ecap0: ecap@48300100 { - compatible = "ti,am3352-ecap", - "ti,am33xx-ecap"; - #pwm-cells = <3>; - reg = <0x48300100 0x80>; - clocks = <&l4ls_gclk>; - clock-names = "fck"; - interrupts = <31>; - interrupt-names = "ecap0"; - status = "disabled"; - }; - - ehrpwm0: pwm@48300200 { - compatible = "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48300200 0x80>; - clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - }; - - epwmss1: epwmss@48302000 { - compatible = "ti,am33xx-pwmss"; - reg = <0x48302000 0x10>; - ti,hwmods = "epwmss1"; - #address-cells = <1>; - #size-cells = <1>; - status = "disabled"; - ranges = <0x48302100 0x48302100 0x80 /* ECAP */ - 0x48302180 0x48302180 0x80 /* EQEP */ - 0x48302200 0x48302200 0x80>; /* EHRPWM */ - - ecap1: ecap@48302100 { - compatible = "ti,am3352-ecap", - "ti,am33xx-ecap"; - #pwm-cells = <3>; - reg = <0x48302100 0x80>; - clocks = <&l4ls_gclk>; - clock-names = "fck"; - interrupts = <47>; - interrupt-names = "ecap1"; - status = "disabled"; - }; - - ehrpwm1: pwm@48302200 { - compatible = "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48302200 0x80>; - clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - }; - - epwmss2: epwmss@48304000 { - compatible = "ti,am33xx-pwmss"; - reg = <0x48304000 0x10>; - ti,hwmods = "epwmss2"; - #address-cells = <1>; - #size-cells = <1>; - status = "disabled"; - ranges = <0x48304100 0x48304100 0x80 /* ECAP */ - 0x48304180 0x48304180 0x80 /* EQEP */ - 0x48304200 0x48304200 0x80>; /* EHRPWM */ - - ecap2: ecap@48304100 { - compatible = "ti,am3352-ecap", - "ti,am33xx-ecap"; - #pwm-cells = <3>; - reg = <0x48304100 0x80>; - clocks = <&l4ls_gclk>; - clock-names = "fck"; - interrupts = <61>; - interrupt-names = "ecap2"; - status = "disabled"; - }; - - ehrpwm2: pwm@48304200 { - compatible = "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48304200 0x80>; - clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - }; - - mac: ethernet@4a100000 { - compatible = "ti,am335x-cpsw","ti,cpsw"; - ti,hwmods = "cpgmac0"; - clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; - clock-names = "fck", "cpts"; - cpdma_channels = <8>; - ale_entries = <1024>; - bd_ram_size = <0x2000>; - mac_control = <0x20>; - slaves = <2>; - active_slave = <0>; - cpts_clock_mult = <0x80000000>; - cpts_clock_shift = <29>; - reg = <0x4a100000 0x800 - 0x4a101200 0x100>; - #address-cells = <1>; - #size-cells = <1>; - /* - * c0_rx_thresh_pend - * c0_rx_pend - * c0_tx_pend - * c0_misc_pend - */ - interrupts = <40 41 42 43>; - ranges; - syscon = <&scm_conf>; - status = "disabled"; - - davinci_mdio: mdio@4a101000 { - compatible = "ti,cpsw-mdio","ti,davinci_mdio"; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "davinci_mdio"; - bus_freq = <1000000>; - reg = <0x4a101000 0x100>; - status = "disabled"; - }; - - cpsw_emac0: slave@4a100200 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - }; - - cpsw_emac1: slave@4a100300 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - }; - - phy_sel: cpsw-phy-sel@44e10650 { - compatible = "ti,am3352-cpsw-phy-sel"; - reg= <0x44e10650 0x4>; - reg-names = "gmii-sel"; - }; - }; - ocmcram: ocmcram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x10000>; /* 64k */ @@ -924,40 +393,6 @@ }; }; - elm: elm@48080000 { - compatible = "ti,am3352-elm"; - reg = <0x48080000 0x2000>; - interrupts = <4>; - ti,hwmods = "elm"; - status = "disabled"; - }; - - lcdc: lcdc@4830e000 { - compatible = "ti,am33xx-tilcdc"; - reg = <0x4830e000 0x1000>; - interrupts = <36>; - ti,hwmods = "lcdc"; - status = "disabled"; - }; - - tscadc: tscadc@44e0d000 { - compatible = "ti,am3359-tscadc"; - reg = <0x44e0d000 0x1000>; - interrupts = <16>; - ti,hwmods = "adc_tsc"; - status = "disabled"; - dmas = <&edma 53 0>, <&edma 57 0>; - dma-names = "fifo0", "fifo1"; - - tsc { - compatible = "ti,am3359-tsc"; - }; - am335x_adc: adc { - #io-channel-cells = <1>; - compatible = "ti,am3359-adc"; - }; - }; - emif: emif@4c000000 { compatible = "ti,emif-am3352"; reg = <0x4c000000 0x1000000>; @@ -1005,42 +440,8 @@ <&edma 5 0>; dma-names = "tx", "rx"; }; - - mcasp0: mcasp@48038000 { - compatible = "ti,am33xx-mcasp-audio"; - ti,hwmods = "mcasp0"; - reg = <0x48038000 0x2000>, - <0x46000000 0x400000>; - reg-names = "mpu", "dat"; - interrupts = <80>, <81>; - interrupt-names = "tx", "rx"; - status = "disabled"; - dmas = <&edma 8 2>, - <&edma 9 2>; - dma-names = "tx", "rx"; - }; - - mcasp1: mcasp@4803c000 { - compatible = "ti,am33xx-mcasp-audio"; - ti,hwmods = "mcasp1"; - reg = <0x4803C000 0x2000>, - <0x46400000 0x400000>; - reg-names = "mpu", "dat"; - interrupts = <82>, <83>; - interrupt-names = "tx", "rx"; - status = "disabled"; - dmas = <&edma 10 2>, - <&edma 11 2>; - dma-names = "tx", "rx"; - }; - - rng: rng@48310000 { - compatible = "ti,omap4-rng"; - ti,hwmods = "rng"; - reg = <0x48310000 0x2000>; - interrupts = <111>; - }; }; }; +#include "am33xx-l4.dtsi" #include "am33xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 1e2bb68231ad..3527c0f2dfff 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -20,6 +20,10 @@ display0 = &lcd0; }; + chosen { + stdout-path = &uart3; + }; + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index a68e89dae7a1..55aff4db9c7c 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -8,6 +8,7 @@ * kind, whether express or implied. */ +#include <dt-bindings/bus/ti-sysc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/am4.h> @@ -159,12 +160,7 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - l4_wkup: l4_wkup@44c00000 { - compatible = "ti,am4-l4-wkup", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x44c00000 0x287000>; - + l4_wkup: interconnect@44c00000 { wkup_m3: wkup_m3@100000 { compatible = "ti,am4372-wkup-m3"; reg = <0x100000 0x4000>, @@ -173,75 +169,10 @@ ti,hwmods = "wkup_m3"; ti,pm-firmware = "am335x-pm-firmware.elf"; }; - - prcm: prcm@1f0000 { - compatible = "ti,am4-prcm", "simple-bus"; - reg = <0x1f0000 0x11000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x1f0000 0x11000>; - - prcm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - prcm_clockdomains: clockdomains { - }; - }; - - scm: scm@210000 { - compatible = "ti,am4-scm", "simple-bus"; - reg = <0x210000 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x210000 0x4000>; - - am43xx_pinmux: pinmux@800 { - compatible = "ti,am437-padconf", - "pinctrl-single"; - reg = <0x800 0x31c>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0xffffffff>; - }; - - scm_conf: scm_conf@0 { - compatible = "syscon"; - reg = <0x0 0x800>; - #address-cells = <1>; - #size-cells = <1>; - - scm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - wkup_m3_ipc: wkup_m3_ipc@1324 { - compatible = "ti,am4372-wkup-m3-ipc"; - reg = <0x1324 0x44>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - ti,rproc = <&wkup_m3>; - mboxes = <&mailbox &mbox_wkupm3>; - }; - - edma_xbar: dma-router@f90 { - compatible = "ti,am335x-edma-crossbar"; - reg = <0xf90 0x40>; - #dma-cells = <3>; - dma-requests = <64>; - dma-masters = <&edma>; - }; - - scm_clockdomains: clockdomains { - }; - }; + }; + l4_per: interconnect@48000000 { + }; + l4_fast: interconnect@4a000000 { }; emif: emif@4c000000 { @@ -297,333 +228,6 @@ interrupt-names = "edma3_tcerrint"; }; - uart0: serial@44e09000 { - compatible = "ti,am4372-uart","ti,omap2-uart"; - reg = <0x44e09000 0x2000>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart1"; - }; - - uart1: serial@48022000 { - compatible = "ti,am4372-uart","ti,omap2-uart"; - reg = <0x48022000 0x2000>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart2"; - status = "disabled"; - }; - - uart2: serial@48024000 { - compatible = "ti,am4372-uart","ti,omap2-uart"; - reg = <0x48024000 0x2000>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart3"; - status = "disabled"; - }; - - uart3: serial@481a6000 { - compatible = "ti,am4372-uart","ti,omap2-uart"; - reg = <0x481a6000 0x2000>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart4"; - status = "disabled"; - }; - - uart4: serial@481a8000 { - compatible = "ti,am4372-uart","ti,omap2-uart"; - reg = <0x481a8000 0x2000>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart5"; - status = "disabled"; - }; - - uart5: serial@481aa000 { - compatible = "ti,am4372-uart","ti,omap2-uart"; - reg = <0x481aa000 0x2000>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart6"; - status = "disabled"; - }; - - mailbox: mailbox@480c8000 { - compatible = "ti,omap4-mailbox"; - reg = <0x480C8000 0x200>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <8>; - mbox_wkupm3: wkup_m3 { - ti,mbox-send-noirq; - ti,mbox-tx = <0 0 0>; - ti,mbox-rx = <0 0 3>; - }; - }; - - timer1: timer@44e31000 { - compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms"; - reg = <0x44e31000 0x400>; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; - ti,timer-alwon; - ti,hwmods = "timer1"; - clocks = <&timer1_fck>; - clock-names = "fck"; - }; - - timer2: timer@48040000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x48040000 0x400>; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer2"; - clocks = <&timer2_fck>; - clock-names = "fck"; - }; - - timer3: timer@48042000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x48042000 0x400>; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer3"; - status = "disabled"; - }; - - timer4: timer@48044000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x48044000 0x400>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; - ti,timer-pwm; - ti,hwmods = "timer4"; - status = "disabled"; - }; - - timer5: timer@48046000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x48046000 0x400>; - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; - ti,timer-pwm; - ti,hwmods = "timer5"; - status = "disabled"; - }; - - timer6: timer@48048000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x48048000 0x400>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - ti,timer-pwm; - ti,hwmods = "timer6"; - status = "disabled"; - }; - - timer7: timer@4804a000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x4804a000 0x400>; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - ti,timer-pwm; - ti,hwmods = "timer7"; - status = "disabled"; - }; - - timer8: timer@481c1000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x481c1000 0x400>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer8"; - status = "disabled"; - }; - - timer9: timer@4833d000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x4833d000 0x400>; - interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer9"; - status = "disabled"; - }; - - timer10: timer@4833f000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x4833f000 0x400>; - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer10"; - status = "disabled"; - }; - - timer11: timer@48341000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x48341000 0x400>; - interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer11"; - status = "disabled"; - }; - - counter32k: counter@44e86000 { - compatible = "ti,am4372-counter32k","ti,omap-counter32k"; - reg = <0x44e86000 0x40>; - ti,hwmods = "counter_32k"; - }; - - rtc: rtc@44e3e000 { - compatible = "ti,am4372-rtc", "ti,am3352-rtc", - "ti,da830-rtc"; - reg = <0x44e3e000 0x1000>; - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "rtc"; - clocks = <&clk_32768_ck>; - clock-names = "int-clk"; - system-power-controller; - status = "disabled"; - }; - - wdt: wdt@44e35000 { - compatible = "ti,am4372-wdt","ti,omap3-wdt"; - reg = <0x44e35000 0x1000>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "wd_timer2"; - }; - - gpio0: gpio@44e07000 { - compatible = "ti,am4372-gpio","ti,omap4-gpio"; - reg = <0x44e07000 0x1000>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - ti,hwmods = "gpio1"; - status = "disabled"; - }; - - gpio1: gpio@4804c000 { - compatible = "ti,am4372-gpio","ti,omap4-gpio"; - reg = <0x4804c000 0x1000>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - ti,hwmods = "gpio2"; - status = "disabled"; - }; - - gpio2: gpio@481ac000 { - compatible = "ti,am4372-gpio","ti,omap4-gpio"; - reg = <0x481ac000 0x1000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - ti,hwmods = "gpio3"; - status = "disabled"; - }; - - gpio3: gpio@481ae000 { - compatible = "ti,am4372-gpio","ti,omap4-gpio"; - reg = <0x481ae000 0x1000>; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - ti,hwmods = "gpio4"; - status = "disabled"; - }; - - gpio4: gpio@48320000 { - compatible = "ti,am4372-gpio","ti,omap4-gpio"; - reg = <0x48320000 0x1000>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - ti,hwmods = "gpio5"; - status = "disabled"; - }; - - gpio5: gpio@48322000 { - compatible = "ti,am4372-gpio","ti,omap4-gpio"; - reg = <0x48322000 0x1000>; - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - ti,hwmods = "gpio6"; - status = "disabled"; - }; - - hwspinlock: spinlock@480ca000 { - compatible = "ti,omap4-hwspinlock"; - reg = <0x480ca000 0x1000>; - ti,hwmods = "spinlock"; - #hwlock-cells = <1>; - }; - - i2c0: i2c@44e0b000 { - compatible = "ti,am4372-i2c","ti,omap4-i2c"; - reg = <0x44e0b000 0x1000>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "i2c1"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c1: i2c@4802a000 { - compatible = "ti,am4372-i2c","ti,omap4-i2c"; - reg = <0x4802a000 0x1000>; - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "i2c2"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@4819c000 { - compatible = "ti,am4372-i2c","ti,omap4-i2c"; - reg = <0x4819c000 0x1000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "i2c3"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi0: spi@48030000 { - compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; - reg = <0x48030000 0x400>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "spi0"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - mmc1: mmc@48060000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x48060000 0x1000>; - ti,hwmods = "mmc1"; - ti,dual-volt; - ti,needs-special-reset; - dmas = <&edma 24 0>, - <&edma 25 0>; - dma-names = "tx", "rx"; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - mmc2: mmc@481d8000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x481d8000 0x1000>; - ti,hwmods = "mmc2"; - ti,needs-special-reset; - dmas = <&edma 2 0>, - <&edma 3 0>; - dma-names = "tx", "rx"; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - mmc3: mmc@47810000 { compatible = "ti,omap4-hsmmc"; reg = <0x47810000 0x1000>; @@ -633,282 +237,6 @@ status = "disabled"; }; - spi1: spi@481a0000 { - compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; - reg = <0x481a0000 0x400>; - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "spi1"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi2: spi@481a2000 { - compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; - reg = <0x481a2000 0x400>; - interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "spi2"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi3: spi@481a4000 { - compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; - reg = <0x481a4000 0x400>; - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "spi3"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi4: spi@48345000 { - compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; - reg = <0x48345000 0x400>; - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "spi4"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - mac: ethernet@4a100000 { - compatible = "ti,am4372-cpsw","ti,cpsw"; - reg = <0x4a100000 0x800 - 0x4a101200 0x100>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - ti,hwmods = "cpgmac0"; - clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>, - <&dpll_clksel_mac_clk>; - clock-names = "fck", "cpts", "50mclk"; - assigned-clocks = <&dpll_clksel_mac_clk>; - assigned-clock-rates = <50000000>; - status = "disabled"; - cpdma_channels = <8>; - ale_entries = <1024>; - bd_ram_size = <0x2000>; - mac_control = <0x20>; - slaves = <2>; - active_slave = <0>; - cpts_clock_mult = <0x80000000>; - cpts_clock_shift = <29>; - ranges; - syscon = <&scm_conf>; - - davinci_mdio: mdio@4a101000 { - compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio"; - reg = <0x4a101000 0x100>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "davinci_mdio"; - bus_freq = <1000000>; - status = "disabled"; - }; - - cpsw_emac0: slave@4a100200 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - }; - - cpsw_emac1: slave@4a100300 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - }; - - phy_sel: cpsw-phy-sel@44e10650 { - compatible = "ti,am43xx-cpsw-phy-sel"; - reg= <0x44e10650 0x4>; - reg-names = "gmii-sel"; - }; - }; - - epwmss0: epwmss@48300000 { - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; - reg = <0x48300000 0x10>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "epwmss0"; - status = "disabled"; - - ecap0: ecap@48300100 { - compatible = "ti,am4372-ecap", - "ti,am3352-ecap", - "ti,am33xx-ecap"; - #pwm-cells = <3>; - reg = <0x48300100 0x80>; - clocks = <&l4ls_gclk>; - clock-names = "fck"; - status = "disabled"; - }; - - ehrpwm0: pwm@48300200 { - compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48300200 0x80>; - clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - }; - - epwmss1: epwmss@48302000 { - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; - reg = <0x48302000 0x10>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "epwmss1"; - status = "disabled"; - - ecap1: ecap@48302100 { - compatible = "ti,am4372-ecap", - "ti,am3352-ecap", - "ti,am33xx-ecap"; - #pwm-cells = <3>; - reg = <0x48302100 0x80>; - clocks = <&l4ls_gclk>; - clock-names = "fck"; - status = "disabled"; - }; - - ehrpwm1: pwm@48302200 { - compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48302200 0x80>; - clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - }; - - epwmss2: epwmss@48304000 { - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; - reg = <0x48304000 0x10>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "epwmss2"; - status = "disabled"; - - ecap2: ecap@48304100 { - compatible = "ti,am4372-ecap", - "ti,am3352-ecap", - "ti,am33xx-ecap"; - #pwm-cells = <3>; - reg = <0x48304100 0x80>; - clocks = <&l4ls_gclk>; - clock-names = "fck"; - status = "disabled"; - }; - - ehrpwm2: pwm@48304200 { - compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48304200 0x80>; - clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - }; - - epwmss3: epwmss@48306000 { - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; - reg = <0x48306000 0x10>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "epwmss3"; - status = "disabled"; - - ehrpwm3: pwm@48306200 { - compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48306200 0x80>; - clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - }; - - epwmss4: epwmss@48308000 { - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; - reg = <0x48308000 0x10>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "epwmss4"; - status = "disabled"; - - ehrpwm4: pwm@48308200 { - compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48308200 0x80>; - clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - }; - - epwmss5: epwmss@4830a000 { - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; - reg = <0x4830a000 0x10>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "epwmss5"; - status = "disabled"; - - ehrpwm5: pwm@4830a200 { - compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; - #pwm-cells = <3>; - reg = <0x4830a200 0x80>; - clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - }; - - tscadc: tscadc@44e0d000 { - compatible = "ti,am3359-tscadc"; - reg = <0x44e0d000 0x1000>; - ti,hwmods = "adc_tsc"; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adc_tsc_fck>; - clock-names = "fck"; - status = "disabled"; - dmas = <&edma 53 0>, <&edma 57 0>; - dma-names = "fifo0", "fifo1"; - - tsc { - compatible = "ti,am3359-tsc"; - }; - - adc { - #io-channel-cells = <1>; - compatible = "ti,am3359-adc"; - }; - - }; - sham: sham@53100000 { compatible = "ti,omap5-sham"; ti,hwmods = "sham"; @@ -938,53 +266,6 @@ dma-names = "tx", "rx"; }; - rng: rng@48310000 { - compatible = "ti,omap4-rng"; - ti,hwmods = "rng"; - reg = <0x48310000 0x2000>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - }; - - mcasp0: mcasp@48038000 { - compatible = "ti,am33xx-mcasp-audio"; - ti,hwmods = "mcasp0"; - reg = <0x48038000 0x2000>, - <0x46000000 0x400000>; - reg-names = "mpu", "dat"; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - status = "disabled"; - dmas = <&edma 8 2>, - <&edma 9 2>; - dma-names = "tx", "rx"; - }; - - mcasp1: mcasp@4803c000 { - compatible = "ti,am33xx-mcasp-audio"; - ti,hwmods = "mcasp1"; - reg = <0x4803C000 0x2000>, - <0x46400000 0x400000>; - reg-names = "mpu", "dat"; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - status = "disabled"; - dmas = <&edma 10 2>, - <&edma 11 2>; - dma-names = "tx", "rx"; - }; - - elm: elm@48080000 { - compatible = "ti,am3352-elm"; - reg = <0x48080000 0x2000>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "elm"; - clocks = <&l4ls_gclk>; - clock-names = "fck"; - status = "disabled"; - }; - gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; @@ -1005,102 +286,6 @@ status = "disabled"; }; - ocp2scp0: ocp2scp@483a8000 { - compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "ocp2scp0"; - - usb2_phy1: phy@483a8000 { - compatible = "ti,am437x-usb2"; - reg = <0x483a8000 0x8000>; - syscon-phy-power = <&scm_conf 0x620>; - clocks = <&usb_phy0_always_on_clk32k>, - <&l4_per_clkctrl AM4_USB_OTG_SS0_CLKCTRL 8>; - clock-names = "wkupclk", "refclk"; - #phy-cells = <0>; - status = "disabled"; - }; - }; - - ocp2scp1: ocp2scp@483e8000 { - compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "ocp2scp1"; - - usb2_phy2: phy@483e8000 { - compatible = "ti,am437x-usb2"; - reg = <0x483e8000 0x8000>; - syscon-phy-power = <&scm_conf 0x628>; - clocks = <&usb_phy1_always_on_clk32k>, - <&l4_per_clkctrl AM4_USB_OTG_SS1_CLKCTRL 8>; - clock-names = "wkupclk", "refclk"; - #phy-cells = <0>; - status = "disabled"; - }; - }; - - dwc3_1: omap_dwc3@48380000 { - compatible = "ti,am437x-dwc3"; - ti,hwmods = "usb_otg_ss0"; - reg = <0x48380000 0x10000>; - interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - utmi-mode = <1>; - ranges; - - usb1: usb@48390000 { - compatible = "synopsys,dwc3"; - reg = <0x48390000 0x10000>; - interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "peripheral", - "host", - "otg"; - phys = <&usb2_phy1>; - phy-names = "usb2-phy"; - maximum-speed = "high-speed"; - dr_mode = "otg"; - status = "disabled"; - snps,dis_u3_susphy_quirk; - snps,dis_u2_susphy_quirk; - }; - }; - - dwc3_2: omap_dwc3@483c0000 { - compatible = "ti,am437x-dwc3"; - ti,hwmods = "usb_otg_ss1"; - reg = <0x483c0000 0x10000>; - interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - utmi-mode = <1>; - ranges; - - usb2: usb@483d0000 { - compatible = "synopsys,dwc3"; - reg = <0x483d0000 0x10000>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "peripheral", - "host", - "otg"; - phys = <&usb2_phy2>; - phy-names = "usb2-phy"; - maximum-speed = "high-speed"; - dr_mode = "otg"; - status = "disabled"; - snps,dis_u3_susphy_quirk; - snps,dis_u2_susphy_quirk; - }; - }; - qspi: spi@47900000 { compatible = "ti,am4372-qspi"; reg = <0x47900000 0x100>, @@ -1114,16 +299,6 @@ status = "disabled"; }; - hdq: hdq@48347000 { - compatible = "ti,am4372-hdq"; - reg = <0x48347000 0x1000>; - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&func_12m_clk>; - clock-names = "fck"; - ti,hwmods = "hdq1w"; - status = "disabled"; - }; - dss: dss@4832a000 { compatible = "ti,omap3-dss"; reg = <0x4832a000 0x200>; @@ -1173,45 +348,8 @@ pool; }; }; - - dcan0: can@481cc000 { - compatible = "ti,am4372-d_can", "ti,am3352-d_can"; - ti,hwmods = "d_can0"; - clocks = <&dcan0_fck>; - clock-names = "fck"; - reg = <0x481cc000 0x2000>; - syscon-raminit = <&scm_conf 0x644 0>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - dcan1: can@481d0000 { - compatible = "ti,am4372-d_can", "ti,am3352-d_can"; - ti,hwmods = "d_can1"; - clocks = <&dcan1_fck>; - clock-names = "fck"; - reg = <0x481d0000 0x2000>; - syscon-raminit = <&scm_conf 0x644 1>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - vpfe0: vpfe@48326000 { - compatible = "ti,am437x-vpfe"; - reg = <0x48326000 0x2000>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "vpfe0"; - status = "disabled"; - }; - - vpfe1: vpfe@48328000 { - compatible = "ti,am437x-vpfe"; - reg = <0x48328000 0x2000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "vpfe1"; - status = "disabled"; - }; }; }; +#include "am437x-l4.dtsi" #include "am43xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 601bf4daaeb7..f4a20cade808 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -67,7 +67,13 @@ debounce-delay-ms = <5>; col-scan-delay-us = <2>; - row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&matrix_keypad_default>; + pinctrl-1 = <&matrix_keypad_sleep>; + + linux,wakeup; + + row-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* Bank0, pin3 */ &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */ &gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */ @@ -155,16 +161,23 @@ beeper: beeper { compatible = "gpio-beeper"; pinctrl-names = "default"; - pinctrl-0 = <&beeper_pins>; + pinctrl-0 = <&beeper_pins_default>; + pinctrl-1 = <&beeper_pins_sleep>; gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; }; }; &am43xx_pinmux { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&wlan_pins_default>; + pinctrl-0 = <&wlan_pins_default &ddr3_vtt_toggle_default &unused_pins &debugss_pins>; pinctrl-1 = <&wlan_pins_sleep>; + ddr3_vtt_toggle_default: ddr_vtt_toggle_default { + pinctrl-single,pins = < + 0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) /* spi0_cs0.gpio5_7 */ + >; + }; + i2c0_pins: i2c0_pins { pinctrl-single,pins = < AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ @@ -511,27 +524,121 @@ >; }; + beeper_pins_default: beeper_pins_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_field.gpio4_12 */ + >; + }; + + beeper_pins_sleep: beeper_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x9e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* cam1_field.gpio4_12 */ + >; + }; + + unused_pins: unused_pins { + pinctrl-single,pins = < + AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa3c, PIN_INPUT | PULL_DISABLE | MUX_MODE7) + AM4372_IOPAD(0xa40, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa44, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa48, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa4c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa50, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa54, PIN_INPUT | PULL_DISABLE | MUX_MODE7) + AM4372_IOPAD(0xa58, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa60, PIN_INPUT | PULL_DISABLE | MUX_MODE7) + AM4372_IOPAD(0xa68, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa70, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa78, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa7c, PIN_INPUT | PULL_DISABLE) + AM4372_IOPAD(0xac8, PIN_INPUT_PULLDOWN) + AM4372_IOPAD(0xad4, PIN_INPUT_PULLDOWN) + AM4372_IOPAD(0xad8, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xadc, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xae0, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xae4, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xae8, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xaec, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xaf0, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xaf4, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xaf8, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xafc, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xb00, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xb04, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xb08, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xb0c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xb10, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xb14, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xb18, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + debugss_pins: pinmux_debugss_pins { + pinctrl-single,pins = < + AM4372_IOPAD(0xa90, PIN_INPUT_PULLDOWN) + AM4372_IOPAD(0xa94, PIN_INPUT_PULLDOWN) + AM4372_IOPAD(0xa98, PIN_INPUT_PULLDOWN) + AM4372_IOPAD(0xa9c, PIN_INPUT_PULLDOWN) + AM4372_IOPAD(0xaa0, PIN_INPUT_PULLDOWN) + AM4372_IOPAD(0xaa4, PIN_INPUT_PULLDOWN) + AM4372_IOPAD(0xaa8, PIN_INPUT_PULLDOWN) + >; + }; + uart0_pins_default: uart0_pins_default { pinctrl-single,pins = < - AM4372_IOPAD(0x968, PIN_INPUT | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */ - AM4372_IOPAD(0x96C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */ - AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM4372_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */ + AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */ + AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; - beeper_pins: beeper_pins { + uart0_pins_sleep: uart0_pins_sleep { pinctrl-single,pins = < - AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_field.gpio4_12 */ + AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_ctsn.uart0_ctsn */ + AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_rtsn.uart0_rtsn */ + AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM4372_IOPAD(0x974, PIN_INPUT_PULLDOWN | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + matrix_keypad_default: matrix_keypad_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7) + AM4372_IOPAD(0x9a8, PIN_OUTPUT | MUX_MODE7) + AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9) + AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0) >; }; + matrix_keypad_sleep: matrix_keypad_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x9a4, PULL_UP | MUX_MODE7) + AM4372_IOPAD(0x9a8, PULL_UP | MUX_MODE7) + AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9) + AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0) + >; + }; }; &uart0 { status = "okay"; - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart0_pins_default>; + pinctrl-1 = <&uart0_pins_sleep>; }; &i2c0 { diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi new file mode 100644 index 000000000000..ca0896f80248 --- /dev/null +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -0,0 +1,2505 @@ +&l4_wkup { /* 0x44c00000 */ + compatible = "ti,am4-l4-wkup", "simple-bus"; + reg = <0x44c00000 0x800>, + <0x44c00800 0x800>, + <0x44c01000 0x400>, + <0x44c01400 0x400>; + reg-names = "ap", "la", "ia0", "ia1"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x44c00000 0x100000>, /* segment 0 */ + <0x00100000 0x44d00000 0x100000>, /* segment 1 */ + <0x00200000 0x44e00000 0x100000>; /* segment 2 */ + + segment@0 { /* 0x44c00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00000800 0x00000800 0x000800>, /* ap 1 */ + <0x00001000 0x00001000 0x000400>, /* ap 2 */ + <0x00001400 0x00001400 0x000400>; /* ap 3 */ + }; + + segment@100000 { /* 0x44d00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00100000 0x004000>, /* ap 4 */ + <0x00004000 0x00104000 0x001000>, /* ap 5 */ + <0x00080000 0x00180000 0x002000>, /* ap 6 */ + <0x00082000 0x00182000 0x001000>, /* ap 7 */ + <0x000f0000 0x001f0000 0x010000>; /* ap 8 */ + + target-module@0 { /* 0x44d00000, ap 4 28.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x4000>; + }; + + target-module@80000 { /* 0x44d80000, ap 6 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x2000>; + }; + + target-module@f0000 { /* 0x44df0000, ap 8 58.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xf0000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf0000 0x10000>; + + prcm: prcm@0 { + compatible = "ti,am4-prcm", "simple-bus"; + reg = <0x0 0x11000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x11000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + }; + }; + + segment@200000 { /* 0x44e00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00200000 0x001000>, /* ap 9 */ + <0x00003000 0x00203000 0x001000>, /* ap 10 */ + <0x00004000 0x00204000 0x001000>, /* ap 11 */ + <0x00005000 0x00205000 0x001000>, /* ap 12 */ + <0x00006000 0x00206000 0x001000>, /* ap 13 */ + <0x00007000 0x00207000 0x001000>, /* ap 14 */ + <0x00008000 0x00208000 0x001000>, /* ap 15 */ + <0x00009000 0x00209000 0x001000>, /* ap 16 */ + <0x0000a000 0x0020a000 0x001000>, /* ap 17 */ + <0x0000b000 0x0020b000 0x001000>, /* ap 18 */ + <0x0000c000 0x0020c000 0x001000>, /* ap 19 */ + <0x0000d000 0x0020d000 0x001000>, /* ap 20 */ + <0x0000f000 0x0020f000 0x001000>, /* ap 21 */ + <0x00010000 0x00210000 0x010000>, /* ap 22 */ + <0x00030000 0x00230000 0x001000>, /* ap 23 */ + <0x00031000 0x00231000 0x001000>, /* ap 24 */ + <0x00032000 0x00232000 0x001000>, /* ap 25 */ + <0x00033000 0x00233000 0x001000>, /* ap 26 */ + <0x00034000 0x00234000 0x001000>, /* ap 27 */ + <0x00035000 0x00235000 0x001000>, /* ap 28 */ + <0x00036000 0x00236000 0x001000>, /* ap 29 */ + <0x00037000 0x00237000 0x001000>, /* ap 30 */ + <0x00038000 0x00238000 0x001000>, /* ap 31 */ + <0x00039000 0x00239000 0x001000>, /* ap 32 */ + <0x0003a000 0x0023a000 0x001000>, /* ap 33 */ + <0x0003e000 0x0023e000 0x001000>, /* ap 34 */ + <0x0003f000 0x0023f000 0x001000>, /* ap 35 */ + <0x00040000 0x00240000 0x040000>, /* ap 36 */ + <0x00080000 0x00280000 0x001000>, /* ap 37 */ + <0x00088000 0x00288000 0x008000>, /* ap 38 */ + <0x00092000 0x00292000 0x001000>, /* ap 39 */ + <0x00086000 0x00286000 0x001000>, /* ap 40 */ + <0x00087000 0x00287000 0x001000>, /* ap 41 */ + <0x00090000 0x00290000 0x001000>, /* ap 42 */ + <0x00091000 0x00291000 0x001000>; /* ap 43 */ + + target-module@3000 { /* 0x44e03000, ap 10 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3000 0x1000>; + }; + + target-module@5000 { /* 0x44e05000, ap 12 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5000 0x1000>; + }; + + target-module@7000 { /* 0x44e07000, ap 14 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio1"; + reg = <0x7000 0x4>, + <0x7010 0x4>, + <0x7114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_GPIO1_CLKCTRL 0>, + <&l4_wkup_clkctrl AM4_L4_WKUP_GPIO1_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7000 0x1000>; + + gpio0: gpio@0 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; + + target-module@9000 { /* 0x44e09000, ap 16 04.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart1"; + reg = <0x9050 0x4>, + <0x9054 0x4>, + <0x9058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_UART1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9000 0x1000>; + + uart0: serial@0 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@b000 { /* 0x44e0b000, ap 18 48.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c1"; + reg = <0xb000 0x8>, + <0xb010 0x8>, + <0xb090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_I2C1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb000 0x1000>; + + i2c0: i2c@0 { + compatible = "ti,am4372-i2c","ti,omap4-i2c"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@d000 { /* 0x44e0d000, ap 20 38.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "adc_tsc"; + reg = <0xd000 0x4>, + <0xd010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): wkup_pwrdm, l3s_tsc_clkdm */ + clocks = <&l3s_tsc_clkctrl AM4_L3S_TSC_ADC_TSC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd000 0x1000>; + + tscadc: tscadc@0 { + compatible = "ti,am3359-tscadc"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&adc_tsc_fck>; + clock-names = "fck"; + status = "disabled"; + dmas = <&edma 53 0>, <&edma 57 0>; + dma-names = "fifo0", "fifo1"; + + tsc { + compatible = "ti,am3359-tsc"; + }; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + + }; + }; + + target-module@10000 { /* 0x44e10000, ap 22 0c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x10000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x10000>; + + scm: scm@0 { + compatible = "ti,am4-scm", "simple-bus"; + reg = <0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x4000>; + + phy_sel: cpsw-phy-sel@650 { + compatible = "ti,am43xx-cpsw-phy-sel"; + reg= <0x650 0x4>; + reg-names = "gmii-sel"; + }; + + am43xx_pinmux: pinmux@800 { + compatible = "ti,am437-padconf", + "pinctrl-single"; + reg = <0x800 0x31c>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + wkup_m3_ipc: wkup_m3_ipc@1324 { + compatible = "ti,am4372-wkup-m3-ipc"; + reg = <0x1324 0x44>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + ti,rproc = <&wkup_m3>; + mboxes = <&mailbox &mbox_wkupm3>; + }; + + edma_xbar: dma-router@f90 { + compatible = "ti,am335x-edma-crossbar"; + reg = <0xf90 0x40>; + #dma-cells = <3>; + dma-requests = <64>; + dma-masters = <&edma>; + }; + + scm_clockdomains: clockdomains { + }; + }; + }; + + target-module@31000 { /* 0x44e31000, ap 24 40.0 */ + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + ti,hwmods = "timer1"; + reg = <0x31000 0x4>, + <0x31010 0x4>, + <0x31014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_TIMER1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x31000 0x1000>; + + timer1: timer@0 { + compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-alwon; + clocks = <&timer1_fck>; + clock-names = "fck"; + }; + }; + + target-module@33000 { /* 0x44e33000, ap 26 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x33000 0x1000>; + }; + + target-module@35000 { /* 0x44e35000, ap 28 50.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "wd_timer2"; + reg = <0x35000 0x4>, + <0x35010 0x4>, + <0x35014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_WD_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x35000 0x1000>; + + wdt: wdt@0 { + compatible = "ti,am4372-wdt","ti,omap3-wdt"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@37000 { /* 0x44e37000, ap 30 08.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x37000 0x1000>; + }; + + target-module@39000 { /* 0x44e39000, ap 32 02.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x39000 0x1000>; + }; + + target-module@3e000 { /* 0x44e3e000, ap 34 60.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "rtc"; + reg = <0x3e074 0x4>, + <0x3e078 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */ + clocks = <&l4_rtc_clkctrl AM4_L4_RTC_RTC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + + rtc: rtc@0 { + compatible = "ti,am4372-rtc", "ti,am3352-rtc", + "ti,da830-rtc"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_32768_ck>; + clock-names = "int-clk"; + system-power-controller; + status = "disabled"; + }; + }; + + target-module@40000 { /* 0x44e40000, ap 36 68.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x40000>; + }; + + target-module@86000 { /* 0x44e86000, ap 40 70.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "counter_32k"; + reg = <0x86000 0x4>, + <0x86004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_aon_clkdm */ + clocks = <&l4_wkup_aon_clkctrl AM4_L4_WKUP_AON_COUNTER_32K_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x86000 0x1000>; + + counter32k: counter@0 { + compatible = "ti,am4372-counter32k","ti,omap-counter32k"; + reg = <0x0 0x40>; + }; + }; + + target-module@88000 { /* 0x44e88000, ap 38 12.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00088000 0x00008000>, + <0x00008000 0x00090000 0x00001000>, + <0x00009000 0x00091000 0x00001000>; + }; + }; +}; + +&l4_fast { /* 0x4a000000 */ + compatible = "ti,am4-l4-fast", "simple-bus"; + reg = <0x4a000000 0x800>, + <0x4a000800 0x800>, + <0x4a001000 0x400>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4a000000 0x1000000>; /* segment 0 */ + + segment@0 { /* 0x4a000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00000800 0x00000800 0x000800>, /* ap 1 */ + <0x00001000 0x00001000 0x000400>, /* ap 2 */ + <0x00100000 0x00100000 0x008000>, /* ap 3 */ + <0x00108000 0x00108000 0x001000>, /* ap 4 */ + <0x00400000 0x00400000 0x002000>, /* ap 5 */ + <0x00402000 0x00402000 0x001000>, /* ap 6 */ + <0x00200000 0x00200000 0x080000>, /* ap 7 */ + <0x00280000 0x00280000 0x001000>; /* ap 8 */ + + target-module@100000 { /* 0x4a100000, ap 3 04.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "cpgmac0"; + reg = <0x101200 0x4>, + <0x101208 0x4>, + <0x101204 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <0>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,syss-mask = <1>; + clocks = <&cpsw_125mhz_clkctrl AM4_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x100000 0x8000>; + + mac: ethernet@0 { + compatible = "ti,am4372-cpsw","ti,cpsw"; + reg = <0x0 0x800 + 0x1200 0x100>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>, + <&dpll_clksel_mac_clk>; + clock-names = "fck", "cpts", "50mclk"; + assigned-clocks = <&dpll_clksel_mac_clk>; + assigned-clock-rates = <50000000>; + status = "disabled"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + mac_control = <0x20>; + slaves = <2>; + active_slave = <0>; + cpts_clock_mult = <0x80000000>; + cpts_clock_shift = <29>; + ranges = <0 0 0x8000>; + syscon = <&scm_conf>; + cpsw-phy-sel = <&phy_sel>; + + davinci_mdio: mdio@1000 { + compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x1000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpsw_125mhz_gclk>; + clock-names = "fck"; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + status = "disabled"; + }; + + cpsw_emac0: slave@200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + cpsw_emac1: slave@300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + }; + + target-module@200000 { /* 0x4a200000, ap 7 02.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x200000 0x80000>; + }; + + target-module@400000 { /* 0x4a400000, ap 5 08.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x400000 0x2000>; + }; + }; +}; + +&l4_per { /* 0x48000000 */ + compatible = "ti,am4-l4-per", "simple-bus"; + reg = <0x48000000 0x800>, + <0x48000800 0x800>, + <0x48001000 0x400>, + <0x48001400 0x400>, + <0x48001800 0x400>, + <0x48001c00 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x48000000 0x100000>, /* segment 0 */ + <0x00100000 0x48100000 0x100000>, /* segment 1 */ + <0x00200000 0x48200000 0x100000>, /* segment 2 */ + <0x00300000 0x48300000 0x100000>, /* segment 3 */ + <0x46000000 0x46000000 0x400000>, /* l3 data port */ + <0x46400000 0x46400000 0x400000>; /* l3 data port */ + + segment@0 { /* 0x48000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00000800 0x00000800 0x000800>, /* ap 1 */ + <0x00001000 0x00001000 0x000400>, /* ap 2 */ + <0x00001400 0x00001400 0x000400>, /* ap 3 */ + <0x00001800 0x00001800 0x000400>, /* ap 4 */ + <0x00001c00 0x00001c00 0x000400>, /* ap 5 */ + <0x00008000 0x00008000 0x001000>, /* ap 6 */ + <0x00009000 0x00009000 0x001000>, /* ap 7 */ + <0x00022000 0x00022000 0x001000>, /* ap 8 */ + <0x00023000 0x00023000 0x001000>, /* ap 9 */ + <0x00024000 0x00024000 0x001000>, /* ap 10 */ + <0x00025000 0x00025000 0x001000>, /* ap 11 */ + <0x0002a000 0x0002a000 0x001000>, /* ap 12 */ + <0x0002b000 0x0002b000 0x001000>, /* ap 13 */ + <0x00038000 0x00038000 0x002000>, /* ap 14 */ + <0x0003a000 0x0003a000 0x001000>, /* ap 15 */ + <0x0003c000 0x0003c000 0x002000>, /* ap 16 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 17 */ + <0x00040000 0x00040000 0x001000>, /* ap 18 */ + <0x00041000 0x00041000 0x001000>, /* ap 19 */ + <0x00042000 0x00042000 0x001000>, /* ap 20 */ + <0x00043000 0x00043000 0x001000>, /* ap 21 */ + <0x00044000 0x00044000 0x001000>, /* ap 22 */ + <0x00045000 0x00045000 0x001000>, /* ap 23 */ + <0x00046000 0x00046000 0x001000>, /* ap 24 */ + <0x00047000 0x00047000 0x001000>, /* ap 25 */ + <0x00048000 0x00048000 0x001000>, /* ap 26 */ + <0x00049000 0x00049000 0x001000>, /* ap 27 */ + <0x0004c000 0x0004c000 0x001000>, /* ap 28 */ + <0x0004d000 0x0004d000 0x001000>, /* ap 29 */ + <0x00060000 0x00060000 0x001000>, /* ap 30 */ + <0x00061000 0x00061000 0x001000>, /* ap 31 */ + <0x00080000 0x00080000 0x010000>, /* ap 32 */ + <0x00090000 0x00090000 0x001000>, /* ap 33 */ + <0x00030000 0x00030000 0x001000>, /* ap 65 */ + <0x00031000 0x00031000 0x001000>, /* ap 66 */ + <0x0004a000 0x0004a000 0x001000>, /* ap 71 */ + <0x0004b000 0x0004b000 0x001000>, /* ap 72 */ + <0x000c8000 0x000c8000 0x001000>, /* ap 73 */ + <0x000c9000 0x000c9000 0x001000>, /* ap 74 */ + <0x000ca000 0x000ca000 0x001000>, /* ap 77 */ + <0x000cb000 0x000cb000 0x001000>, /* ap 78 */ + <0x00034000 0x00034000 0x001000>, /* ap 80 */ + <0x00035000 0x00035000 0x001000>, /* ap 81 */ + <0x00036000 0x00036000 0x001000>, /* ap 84 */ + <0x00037000 0x00037000 0x001000>, /* ap 85 */ + <0x46000000 0x46000000 0x400000>, /* l3 data port */ + <0x46400000 0x46400000 0x400000>; /* l3 data port */ + + target-module@8000 { /* 0x48008000, ap 6 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + }; + + target-module@22000 { /* 0x48022000, ap 8 0a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart2"; + reg = <0x22050 0x4>, + <0x22054 0x4>, + <0x22058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_UART2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>; + + uart1: serial@0 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@24000 { /* 0x48024000, ap 10 1c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart3"; + reg = <0x24050 0x4>, + <0x24054 0x4>, + <0x24058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_UART3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + uart2: serial@0 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@2a000 { /* 0x4802a000, ap 12 22.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c2"; + reg = <0x2a000 0x8>, + <0x2a010 0x8>, + <0x2a090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_I2C2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>; + + i2c1: i2c@0 { + compatible = "ti,am4372-i2c","ti,omap4-i2c"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@30000 { /* 0x48030000, ap 65 08.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spi0"; + reg = <0x30000 0x4>, + <0x30110 0x4>, + <0x30114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_SPI0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x30000 0x1000>; + + spi0: spi@0 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@34000 { /* 0x48034000, ap 80 56.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x34000 0x1000>; + }; + + target-module@36000 { /* 0x48036000, ap 84 3e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + }; + + target-module@38000 { /* 0x48038000, ap 14 04.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "mcasp0"; + reg = <0x38000 0x4>, + <0x38004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): per_pwrdm, l3s_clkdm */ + clocks = <&l3s_clkctrl AM4_L3S_MCASP0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x38000 0x2000>, + <0x46000000 0x46000000 0x400000>; + + mcasp0: mcasp@0 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x2000>, + <0x46000000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + status = "disabled"; + dmas = <&edma 8 2>, + <&edma 9 2>; + dma-names = "tx", "rx"; + }; + }; + + target-module@3c000 { /* 0x4803c000, ap 16 2a.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "mcasp1"; + reg = <0x3c000 0x4>, + <0x3c004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): per_pwrdm, l3s_clkdm */ + clocks = <&l3s_clkctrl AM4_L3S_MCASP1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3c000 0x2000>, + <0x46400000 0x46400000 0x400000>; + + mcasp1: mcasp@0 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x2000>, + <0x46400000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + status = "disabled"; + dmas = <&edma 10 2>, + <&edma 11 2>; + dma-names = "tx", "rx"; + }; + }; + + target-module@40000 { /* 0x48040000, ap 18 1e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer2"; + reg = <0x40000 0x4>, + <0x40010 0x4>, + <0x40014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x1000>; + + timer2: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&timer2_fck>; + clock-names = "fck"; + }; + }; + + target-module@42000 { /* 0x48042000, ap 20 24.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer3"; + reg = <0x42000 0x4>, + <0x42010 0x4>, + <0x42014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x42000 0x1000>; + + timer3: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@44000 { /* 0x48044000, ap 22 26.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer4"; + reg = <0x44000 0x4>, + <0x44010 0x4>, + <0x44014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x44000 0x1000>; + + timer4: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + status = "disabled"; + }; + }; + + target-module@46000 { /* 0x48046000, ap 24 28.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer5"; + reg = <0x46000 0x4>, + <0x46010 0x4>, + <0x46014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x46000 0x1000>; + + timer5: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + status = "disabled"; + }; + }; + + target-module@48000 { /* 0x48048000, ap 26 1a.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer6"; + reg = <0x48000 0x4>, + <0x48010 0x4>, + <0x48014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x48000 0x1000>; + + timer6: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + status = "disabled"; + }; + }; + + target-module@4a000 { /* 0x4804a000, ap 71 48.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer7"; + reg = <0x4a000 0x4>, + <0x4a010 0x4>, + <0x4a014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER7_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4a000 0x1000>; + + timer7: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + status = "disabled"; + }; + }; + + target-module@4c000 { /* 0x4804c000, ap 28 36.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio2"; + reg = <0x4c000 0x4>, + <0x4c010 0x4>, + <0x4c114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_GPIO2_CLKCTRL 0>, + <&l4ls_clkctrl AM4_L4LS_GPIO2_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4c000 0x1000>; + + gpio1: gpio@0 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; + + target-module@60000 { /* 0x48060000, ap 30 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mmc1"; + reg = <0x602fc 0x4>, + <0x60110 0x4>, + <0x60114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_MMC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + + mmc1: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x1000>; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&edma 24 0>, + <&edma 25 0>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@80000 { /* 0x48080000, ap 32 18.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "elm"; + reg = <0x80000 0x4>, + <0x80010 0x4>, + <0x80014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_ELM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + elm: elm@0 { + compatible = "ti,am3352-elm"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + status = "disabled"; + }; + }; + + target-module@c8000 { /* 0x480c8000, ap 73 06.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox"; + reg = <0xc8000 0x4>, + <0xc8010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_MAILBOX_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc8000 0x1000>; + + mailbox: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <8>; + mbox_wkupm3: wkup_m3 { + ti,mbox-send-noirq; + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + }; + }; + }; + + target-module@ca000 { /* 0x480ca000, ap 77 38.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spinlock"; + reg = <0xca000 0x4>, + <0xca010 0x4>, + <0xca014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_SPINLOCK_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xca000 0x1000>; + + hwspinlock: spinlock@0 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x0 0x1000>; + #hwlock-cells = <1>; + }; + }; + }; + + segment@100000 { /* 0x48100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0008c000 0x0018c000 0x001000>, /* ap 34 */ + <0x0008d000 0x0018d000 0x001000>, /* ap 35 */ + <0x0008e000 0x0018e000 0x001000>, /* ap 36 */ + <0x0008f000 0x0018f000 0x001000>, /* ap 37 */ + <0x0009c000 0x0019c000 0x001000>, /* ap 38 */ + <0x0009d000 0x0019d000 0x001000>, /* ap 39 */ + <0x000a6000 0x001a6000 0x001000>, /* ap 40 */ + <0x000a7000 0x001a7000 0x001000>, /* ap 41 */ + <0x000a8000 0x001a8000 0x001000>, /* ap 42 */ + <0x000a9000 0x001a9000 0x001000>, /* ap 43 */ + <0x000aa000 0x001aa000 0x001000>, /* ap 44 */ + <0x000ab000 0x001ab000 0x001000>, /* ap 45 */ + <0x000ac000 0x001ac000 0x001000>, /* ap 46 */ + <0x000ad000 0x001ad000 0x001000>, /* ap 47 */ + <0x000ae000 0x001ae000 0x001000>, /* ap 48 */ + <0x000af000 0x001af000 0x001000>, /* ap 49 */ + <0x000cc000 0x001cc000 0x002000>, /* ap 50 */ + <0x000ce000 0x001ce000 0x002000>, /* ap 51 */ + <0x000d0000 0x001d0000 0x002000>, /* ap 52 */ + <0x000d2000 0x001d2000 0x002000>, /* ap 53 */ + <0x000d8000 0x001d8000 0x001000>, /* ap 54 */ + <0x000d9000 0x001d9000 0x001000>, /* ap 55 */ + <0x000a0000 0x001a0000 0x001000>, /* ap 67 */ + <0x000a1000 0x001a1000 0x001000>, /* ap 68 */ + <0x000a2000 0x001a2000 0x001000>, /* ap 69 */ + <0x000a3000 0x001a3000 0x001000>, /* ap 70 */ + <0x000a4000 0x001a4000 0x001000>, /* ap 92 */ + <0x000a5000 0x001a5000 0x001000>, /* ap 93 */ + <0x000c1000 0x001c1000 0x001000>, /* ap 94 */ + <0x000c2000 0x001c2000 0x001000>; /* ap 95 */ + + target-module@8c000 { /* 0x4818c000, ap 34 0c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8c000 0x1000>; + }; + + target-module@8e000 { /* 0x4818e000, ap 36 02.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8e000 0x1000>; + }; + + target-module@9c000 { /* 0x4819c000, ap 38 52.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c3"; + reg = <0x9c000 0x8>, + <0x9c010 0x8>, + <0x9c090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_I2C3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9c000 0x1000>; + + i2c2: i2c@0 { + compatible = "ti,am4372-i2c","ti,omap4-i2c"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@a0000 { /* 0x481a0000, ap 67 2c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spi1"; + reg = <0xa0000 0x4>, + <0xa0110 0x4>, + <0xa0114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_SPI1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa0000 0x1000>; + + spi1: spi@0 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@a2000 { /* 0x481a2000, ap 69 2e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spi2"; + reg = <0xa2000 0x4>, + <0xa2110 0x4>, + <0xa2114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_SPI2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa2000 0x1000>; + + spi2: spi@0 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@a4000 { /* 0x481a4000, ap 92 62.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spi3"; + reg = <0xa4000 0x4>, + <0xa4110 0x4>, + <0xa4114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_SPI3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa4000 0x1000>; + + spi3: spi@0 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@a6000 { /* 0x481a6000, ap 40 16.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart4"; + reg = <0xa6050 0x4>, + <0xa6054 0x4>, + <0xa6058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_UART4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa6000 0x1000>; + + uart3: serial@0 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@a8000 { /* 0x481a8000, ap 42 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart5"; + reg = <0xa8050 0x4>, + <0xa8054 0x4>, + <0xa8058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_UART5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa8000 0x1000>; + + uart4: serial@0 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@aa000 { /* 0x481aa000, ap 44 12.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart6"; + reg = <0xaa050 0x4>, + <0xaa054 0x4>, + <0xaa058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_UART6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xaa000 0x1000>; + + uart5: serial@0 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@ac000 { /* 0x481ac000, ap 46 30.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio3"; + reg = <0xac000 0x4>, + <0xac010 0x4>, + <0xac114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_GPIO3_CLKCTRL 0>, + <&l4ls_clkctrl AM4_L4LS_GPIO3_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xac000 0x1000>; + + gpio2: gpio@0 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; + + target-module@ae000 { /* 0x481ae000, ap 48 32.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio4"; + reg = <0xae000 0x4>, + <0xae010 0x4>, + <0xae114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_GPIO4_CLKCTRL 0>, + <&l4ls_clkctrl AM4_L4LS_GPIO4_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xae000 0x1000>; + + gpio3: gpio@0 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; + + target-module@c1000 { /* 0x481c1000, ap 94 68.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer8"; + reg = <0xc1000 0x4>, + <0xc1010 0x4>, + <0xc1014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER8_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc1000 0x1000>; + + timer8: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@cc000 { /* 0x481cc000, ap 50 46.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "d_can0"; + reg = <0xcc000 0x4>; + reg-names = "rev"; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xcc000 0x2000>; + + dcan0: can@0 { + compatible = "ti,am4372-d_can", "ti,am3352-d_can"; + reg = <0x0 0x2000>; + syscon-raminit = <&scm_conf 0x644 0>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@d0000 { /* 0x481d0000, ap 52 3a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "d_can1"; + reg = <0xd0000 0x4>; + reg-names = "rev"; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd0000 0x2000>; + + dcan1: can@0 { + compatible = "ti,am4372-d_can", "ti,am3352-d_can"; + reg = <0x0 0x2000>; + syscon-raminit = <&scm_conf 0x644 1>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@d8000 { /* 0x481d8000, ap 54 5e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mmc2"; + reg = <0xd82fc 0x4>, + <0xd8110 0x4>, + <0xd8114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_MMC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd8000 0x1000>; + + mmc2: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x1000>; + ti,needs-special-reset; + dmas = <&edma 2 0>, + <&edma 3 0>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + }; + + segment@200000 { /* 0x48200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; + + segment@300000 { /* 0x48300000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00300000 0x001000>, /* ap 56 */ + <0x00001000 0x00301000 0x001000>, /* ap 57 */ + <0x00002000 0x00302000 0x001000>, /* ap 58 */ + <0x00003000 0x00303000 0x001000>, /* ap 59 */ + <0x00004000 0x00304000 0x001000>, /* ap 60 */ + <0x00005000 0x00305000 0x001000>, /* ap 61 */ + <0x00018000 0x00318000 0x004000>, /* ap 62 */ + <0x0001c000 0x0031c000 0x001000>, /* ap 63 */ + <0x00010000 0x00310000 0x002000>, /* ap 64 */ + <0x00028000 0x00328000 0x001000>, /* ap 75 */ + <0x00029000 0x00329000 0x001000>, /* ap 76 */ + <0x00012000 0x00312000 0x001000>, /* ap 79 */ + <0x00020000 0x00320000 0x001000>, /* ap 82 */ + <0x00021000 0x00321000 0x001000>, /* ap 83 */ + <0x00026000 0x00326000 0x001000>, /* ap 86 */ + <0x00027000 0x00327000 0x001000>, /* ap 87 */ + <0x0002a000 0x0032a000 0x000400>, /* ap 88 */ + <0x0002c000 0x0032c000 0x001000>, /* ap 89 */ + <0x00013000 0x00313000 0x001000>, /* ap 90 */ + <0x00014000 0x00314000 0x001000>, /* ap 91 */ + <0x00006000 0x00306000 0x001000>, /* ap 96 */ + <0x00007000 0x00307000 0x001000>, /* ap 97 */ + <0x00008000 0x00308000 0x001000>, /* ap 98 */ + <0x00009000 0x00309000 0x001000>, /* ap 99 */ + <0x0000a000 0x0030a000 0x001000>, /* ap 100 */ + <0x0000b000 0x0030b000 0x001000>, /* ap 101 */ + <0x0003d000 0x0033d000 0x001000>, /* ap 102 */ + <0x0003e000 0x0033e000 0x001000>, /* ap 103 */ + <0x0003f000 0x0033f000 0x001000>, /* ap 104 */ + <0x00040000 0x00340000 0x001000>, /* ap 105 */ + <0x00041000 0x00341000 0x001000>, /* ap 106 */ + <0x00042000 0x00342000 0x001000>, /* ap 107 */ + <0x00045000 0x00345000 0x001000>, /* ap 108 */ + <0x00046000 0x00346000 0x001000>, /* ap 109 */ + <0x00047000 0x00347000 0x001000>, /* ap 110 */ + <0x00048000 0x00348000 0x001000>, /* ap 111 */ + <0x000f2000 0x003f2000 0x002000>, /* ap 112 */ + <0x000f4000 0x003f4000 0x001000>, /* ap 113 */ + <0x0004c000 0x0034c000 0x002000>, /* ap 114 */ + <0x0004e000 0x0034e000 0x001000>, /* ap 115 */ + <0x00022000 0x00322000 0x001000>, /* ap 116 */ + <0x00023000 0x00323000 0x001000>, /* ap 117 */ + <0x000f0000 0x003f0000 0x001000>, /* ap 118 */ + <0x0002a400 0x0032a400 0x000400>, /* ap 119 */ + <0x0002a800 0x0032a800 0x000400>, /* ap 120 */ + <0x0002ac00 0x0032ac00 0x000400>, /* ap 121 */ + <0x0002b000 0x0032b000 0x001000>, /* ap 122 */ + <0x00080000 0x00380000 0x020000>, /* ap 123 */ + <0x000a0000 0x003a0000 0x001000>, /* ap 124 */ + <0x000a8000 0x003a8000 0x008000>, /* ap 125 */ + <0x000b0000 0x003b0000 0x001000>, /* ap 126 */ + <0x000c0000 0x003c0000 0x020000>, /* ap 127 */ + <0x000e0000 0x003e0000 0x001000>, /* ap 128 */ + <0x000e8000 0x003e8000 0x008000>; /* ap 129 */ + + target-module@0 { /* 0x48300000, ap 56 40.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss0"; + reg = <0x0 0x4>, + <0x4 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + epwmss0: epwmss@0 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + status = "disabled"; + + ecap0: ecap@100 { + compatible = "ti,am4372-ecap", + "ti,am3352-ecap", + "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + status = "disabled"; + }; + + ehrpwm0: pwm@200 { + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@2000 { /* 0x48302000, ap 58 4a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss1"; + reg = <0x2000 0x4>, + <0x2004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + + epwmss1: epwmss@0 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + status = "disabled"; + + ecap1: ecap@100 { + compatible = "ti,am4372-ecap", + "ti,am3352-ecap", + "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + status = "disabled"; + }; + + ehrpwm1: pwm@200 { + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@4000 { /* 0x48304000, ap 60 44.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss2"; + reg = <0x4000 0x4>, + <0x4004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + epwmss2: epwmss@0 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + status = "disabled"; + + ecap2: ecap@100 { + compatible = "ti,am4372-ecap", + "ti,am3352-ecap", + "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + status = "disabled"; + }; + + ehrpwm2: pwm@200 { + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@6000 { /* 0x48306000, ap 96 58.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss3"; + reg = <0x6000 0x4>, + <0x6004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x1000>; + + epwmss3: epwmss@0 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + status = "disabled"; + + ehrpwm3: pwm@200 { + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@8000 { /* 0x48308000, ap 98 54.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss4"; + reg = <0x8000 0x4>, + <0x8004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + + epwmss4: epwmss@0 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + status = "disabled"; + + ehrpwm4: pwm@48308200 { + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@a000 { /* 0x4830a000, ap 100 60.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss5"; + reg = <0xa000 0x4>, + <0xa004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + + epwmss5: epwmss@0 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + status = "disabled"; + + ehrpwm5: pwm@200 { + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@10000 { /* 0x48310000, ap 64 4e.1 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "rng"; + reg = <0x11fe0 0x4>, + <0x11fe4 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_RNG_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x2000>; + + rng: rng@0 { + compatible = "ti,omap4-rng"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@13000 { /* 0x48313000, ap 90 50.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x13000 0x1000>; + }; + + target-module@18000 { /* 0x48318000, ap 62 4c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000 0x4000>; + }; + + target-module@20000 { /* 0x48320000, ap 82 34.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio5"; + reg = <0x20000 0x4>, + <0x20010 0x4>, + <0x20114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_GPIO5_CLKCTRL 0>, + <&l4ls_clkctrl AM4_L4LS_GPIO5_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + + gpio4: gpio@0 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; + + target-module@22000 { /* 0x48322000, ap 116 64.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio6"; + reg = <0x22000 0x4>, + <0x22010 0x4>, + <0x22114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_GPIO6_CLKCTRL 0>, + <&l4ls_clkctrl AM4_L4LS_GPIO6_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>; + + gpio5: gpio@0 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; + + target-module@26000 { /* 0x48326000, ap 86 66.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "vpfe0"; + reg = <0x26000 0x4>, + <0x26104 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): per_pwrdm, l3s_clkdm */ + clocks = <&l3s_clkctrl AM4_L3S_VPFE0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>; + + vpfe0: vpfe@0 { + compatible = "ti,am437x-vpfe"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@28000 { /* 0x48328000, ap 75 0e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "vpfe1"; + reg = <0x28000 0x4>, + <0x28104 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): per_pwrdm, l3s_clkdm */ + clocks = <&l3s_clkctrl AM4_L3S_VPFE1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>; + + vpfe1: vpfe@0 { + compatible = "ti,am437x-vpfe"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@2a000 { /* 0x4832a000, ap 88 3c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "dss_core"; + reg = <0x2a000 0x4>, + <0x2a010 0x4>, + <0x2a014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, dss_clkdm */ + clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x0002a000 0x00000400>, + <0x00000400 0x0002a400 0x00000400>, + <0x00000800 0x0002a800 0x00000400>, + <0x00000c00 0x0002ac00 0x00000400>, + <0x00001000 0x0002b000 0x00001000>; + }; + + target-module@3d000 { /* 0x4833d000, ap 102 6e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer9"; + reg = <0x3d000 0x4>, + <0x3d010 0x4>, + <0x3d014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER9_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3d000 0x1000>; + + timer9: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@3f000 { /* 0x4833f000, ap 104 5c.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer10"; + reg = <0x3f000 0x4>, + <0x3f010 0x4>, + <0x3f014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER10_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3f000 0x1000>; + + timer10: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@41000 { /* 0x48341000, ap 106 76.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer11"; + reg = <0x41000 0x4>, + <0x41010 0x4>, + <0x41014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER11_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x41000 0x1000>; + + timer11: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@45000 { /* 0x48345000, ap 108 6a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spi4"; + reg = <0x45000 0x4>, + <0x45110 0x4>, + <0x45114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_SPI4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x45000 0x1000>; + + spi4: spi@0 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@47000 { /* 0x48347000, ap 110 70.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "hdq1w"; + reg = <0x47000 0x4>, + <0x47014 0x4>, + <0x47018 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_HDQ1W_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x47000 0x1000>; + + hdq: hdq@0 { + compatible = "ti,am4372-hdq"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&func_12m_clk>; + clock-names = "fck"; + status = "disabled"; + }; + }; + + target-module@4c000 { /* 0x4834c000, ap 114 72.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4c000 0x2000>; + }; + + target-module@80000 { /* 0x48380000, ap 123 42.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_otg_ss0"; + reg = <0x80000 0x4>, + <0x80010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l3s_clkdm */ + clocks = <&l3s_clkctrl AM4_L3S_USB_OTG_SS0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x20000>; + + dwc3_1: omap_dwc3@0 { + compatible = "ti,am437x-dwc3"; + reg = <0x0 0x10000>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <1>; + ranges = <0 0 0x20000>; + + usb1: usb@10000 { + compatible = "synopsys,dwc3"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; + phys = <&usb2_phy1>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + status = "disabled"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; + }; + }; + }; + + target-module@a8000 { /* 0x483a8000, ap 125 6c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ocp2scp0"; + reg = <0xa8000 0x4>; + reg-names = "rev"; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_OCP2SCP0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa8000 0x8000>; + + ocp2scp0: ocp2scp@0 { + compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x8000>; + + usb2_phy1: phy@8000 { + compatible = "ti,am437x-usb2"; + reg = <0x0 0x8000>; + syscon-phy-power = <&scm_conf 0x620>; + clocks = <&usb_phy0_always_on_clk32k>, + <&l3s_clkctrl AM4_L3S_USB_OTG_SS0_CLKCTRL 8>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + target-module@c0000 { /* 0x483c0000, ap 127 7a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_otg_ss1"; + reg = <0xc0000 0x4>, + <0xc0010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l3s_clkdm */ + clocks = <&l3s_clkctrl AM4_L3S_USB_OTG_SS1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc0000 0x20000>; + + dwc3_2: omap_dwc3@0 { + compatible = "ti,am437x-dwc3"; + reg = <0x0 0x10000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <1>; + ranges = <0 0 0x20000>; + + usb2: usb@10000 { + compatible = "synopsys,dwc3"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; + phys = <&usb2_phy2>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + status = "disabled"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; + }; + }; + }; + + target-module@e8000 { /* 0x483e8000, ap 129 78.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ocp2scp1"; + reg = <0xe8000 0x4>; + reg-names = "rev"; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_OCP2SCP1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe8000 0x8000>; + + ocp2scp1: ocp2scp@0 { + compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x8000>; + + usb2_phy2: phy@8000 { + compatible = "ti,am437x-usb2"; + reg = <0x0 0x8000>; + syscon-phy-power = <&scm_conf 0x628>; + clocks = <&usb_phy1_always_on_clk32k>, + <&l3s_clkctrl AM4_L3S_USB_OTG_SS1_CLKCTRL 8>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + target-module@f2000 { /* 0x483f2000, ap 112 5a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf2000 0x2000>; + }; + }; +}; + diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index a7037a4b4fd4..e3f420793c12 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -710,73 +710,123 @@ }; &prcm { - l4_wkup_cm: l4_wkup_cm@2800 { + wkup_cm: wkup-cm@2800 { compatible = "ti,omap4-cm"; reg = <0x2800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x2800 0x400>; - l4_wkup_clkctrl: clk@20 { + l3s_tsc_clkctrl: l3s-tsc-clkctrl@120 { compatible = "ti,clkctrl"; - reg = <0x20 0x34c>; + reg = <0x120 0x4>; #clock-cells = <2>; }; + + l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@228 { + compatible = "ti,clkctrl"; + reg = <0x228 0xc>; + #clock-cells = <2>; + }; + + l4_wkup_clkctrl: l4-wkup-clkctrl@220 { + compatible = "ti,clkctrl"; + reg = <0x220 0x4>, <0x328 0x44>; + #clock-cells = <2>; + }; + }; - mpu_cm: mpu_cm@8300 { + mpu_cm: mpu-cm@8300 { compatible = "ti,omap4-cm"; reg = <0x8300 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8300 0x100>; - mpu_clkctrl: clk@20 { + mpu_clkctrl: mpu-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - gfx_l3_cm: gfx_l3_cm@8400 { + gfx_l3_cm: gfx-l3-cm@8400 { compatible = "ti,omap4-cm"; reg = <0x8400 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8400 0x100>; - gfx_l3_clkctrl: clk@20 { + gfx_l3_clkctrl: gfx-l3-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - l4_rtc_cm: l4_rtc_cm@8500 { + l4_rtc_cm: l4-rtc-cm@8500 { compatible = "ti,omap4-cm"; reg = <0x8500 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8500 0x100>; - l4_rtc_clkctrl: clk@20 { + l4_rtc_clkctrl: l4-rtc-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - l4_per_cm: l4_per_cm@8800 { + per_cm: per-cm@8800 { compatible = "ti,omap4-cm"; reg = <0x8800 0xc00>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8800 0xc00>; - l4_per_clkctrl: clk@20 { + l3_clkctrl: l3-clkctrl@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x3c>, <0x78 0x2c>; + #clock-cells = <2>; + }; + + l3s_clkctrl: l3s-clkctrl@68 { + compatible = "ti,clkctrl"; + reg = <0x68 0xc>, <0x220 0x4c>; + #clock-cells = <2>; + }; + + pruss_ocp_clkctrl: pruss-ocp-clkctrl@320 { compatible = "ti,clkctrl"; - reg = <0x20 0xb04>; + reg = <0x320 0x4>; #clock-cells = <2>; }; + + l4ls_clkctrl: l4ls-clkctrl@420 { + compatible = "ti,clkctrl"; + reg = <0x420 0x1a4>; + #clock-cells = <2>; + }; + + emif_clkctrl: emif-clkctrl@720 { + compatible = "ti,clkctrl"; + reg = <0x720 0x4>; + #clock-cells = <2>; + }; + + dss_clkctrl: dss-clkctrl@a20 { + compatible = "ti,clkctrl"; + reg = <0xa20 0x4>; + #clock-cells = <2>; + }; + + cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@b20 { + compatible = "ti,clkctrl"; + reg = <0xb20 0x4>; + #clock-cells = <2>; + }; + }; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index ad953113cefb..1e6620f139dd 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -555,7 +555,7 @@ &mcasp3 { #sound-dai-cells = <0>; - assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>; + assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; assigned-clock-parents = <&sys_clkin2>; status = "okay"; diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi index a5676697ff3b..916a97734f84 100644 --- a/arch/arm/boot/dts/arm-realview-pbx.dtsi +++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -44,7 +44,7 @@ }; /* The voltage to the MMC card is hardwired at 3.3V */ - vmmc: fixedregulator@0 { + vmmc: regulator-vmmc { compatible = "regulator-fixed"; regulator-name = "vmmc"; regulator-min-microvolt = <3300000>; @@ -52,7 +52,7 @@ regulator-boot-on; }; - veth: fixedregulator@0 { + veth: regulator-veth { compatible = "regulator-fixed"; regulator-name = "veth"; regulator-min-microvolt = <3300000>; @@ -567,4 +567,3 @@ }; }; }; - diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts index df1227613d48..c2ece0b91885 100644 --- a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts +++ b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts @@ -13,7 +13,7 @@ bootargs = "console=ttyS4,115200 earlyprintk"; }; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts new file mode 100644 index 000000000000..9f194b5eeba4 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts @@ -0,0 +1,368 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2018 Facebook Inc. +/dts-v1/; + +#include "aspeed-g5.dtsi" + +/ { + model = "Facebook Backpack CMM BMC"; + compatible = "facebook,cmm-bmc", "aspeed,ast2500"; + + aliases { + /* + * Override the default uart aliases to avoid breaking + * the legacy applications. + */ + serial0 = &uart5; + serial1 = &uart1; + serial2 = &uart3; + serial3 = &uart4; + + /* + * Hardcode the bus number of i2c switches' channels to + * avoid breaking the legacy applications. + */ + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; + i2c32 = &imux32; + i2c33 = &imux33; + i2c34 = &imux34; + i2c35 = &imux35; + i2c36 = &imux36; + i2c37 = &imux37; + i2c38 = &imux38; + i2c39 = &imux39; + }; + + chosen { + stdout-path = &uart1; + bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +/* + * Update reset type to "system" (full chip) to fix warm reboot hang issue + * when reset type is set to default ("soc", gated by reset mask registers). + */ +&wdt1 { + status = "okay"; + aspeed,reset-type = "system"; +}; + +/* + * wdt2 is not used by Backpack CMM. + */ +&wdt2 { + status = "disabled"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "facebook-bmc-flash-layout.dtsi" + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_ndsr1_default + &pinctrl_ndtr1_default + &pinctrl_nrts1_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default + &pinctrl_ncts3_default + &pinctrl_ndcd3_default + &pinctrl_nri3_default>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default + &pinctrl_rxd4_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac1 { + status = "okay"; + no-hw-checksum; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +/* + * I2C bus reserved for communication with COM-E. + */ +&i2c0 { + status = "okay"; +}; + +/* + * I2C bus to Line Cards and Fabric Cards. + */ +&i2c1 { + status = "okay"; + + i2c-switch@77 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + + imux16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux20: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux21: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux22: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux23: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +/* + * I2C bus to Power Distribution Board. + */ +&i2c2 { + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + imux24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux26: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux27: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux28: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux29: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux30: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux31: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +/* + * I2c bus connected with temperature sensors on CMM. + */ +&i2c3 { + status = "okay"; +}; + +/* + * I2C bus reserved for communication with COM-E. + */ +&i2c4 { + status = "okay"; +}; + +/* + * I2c bus connected with ADM1278. + */ +&i2c5 { + status = "okay"; +}; + +/* + * I2c bus connected with I/O Expander. + */ +&i2c6 { + status = "okay"; +}; + +/* + * I2c bus connected with I/O Expander and EPROMs. + */ +&i2c7 { + status = "okay"; +}; + +/* + * I2C bus to Fan Control Board. + */ +&i2c8 { + status = "okay"; + + i2c-switch@77 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + + imux32: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux33: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux34: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux35: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux36: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux37: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux38: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux39: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +/* + * I2C bus to CMM CPLD. + */ +&i2c13 { + status = "okay"; +}; + +&adc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts index 7a291de02543..22dade6393d0 100644 --- a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts +++ b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts @@ -13,7 +13,7 @@ bootargs = "earlyprintk"; }; - memory { + memory@80000000 { reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts index d598b6391362..024e52a6cd0f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts @@ -14,7 +14,7 @@ bootargs = "console=ttyS4,115200 earlyprintk"; }; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -322,4 +322,3 @@ &adc { status = "okay"; }; - diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index c7084a819dc6..9aa1d4467453 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -26,6 +26,16 @@ no-map; reg = <0x5f000000 0x01000000>; /* 16M */ }; + + coldfire_memory: codefire_memory@5ee00000 { + reg = <0x5ee00000 0x00200000>; + no-map; + }; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x01000000>; /* 16MB */ + }; }; leds { @@ -44,6 +54,22 @@ }; }; + fsi: gpio-fsi { + compatible = "aspeed,ast2400-cf-fsi-master", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + + memory-region = <&coldfire_memory>; + aspeed,sram = <&sram>; + aspeed,cvic = <&cvic>; + + clock-gpios = <&gpio ASPEED_GPIO(A, 4) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(A, 5) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>; + }; + gpio-keys { compatible = "gpio-keys"; @@ -169,6 +195,12 @@ status = "okay"; }; +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi>; +}; + &gpio { pin_func_mode0 { gpio-hog; @@ -303,13 +335,6 @@ line-name = "SYS_PWROK_BMC"; }; - pin_gpio_h6 { - gpio-hog; - gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>; - output-high; - line-name = "SCM1_FSI0_DATA_EN"; - }; - pin_gpio_h7 { gpio-hog; gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 7d28c03a9e0b..76fe994f2ba4 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -30,6 +30,11 @@ no-map; reg = <0x98000000 0x04000000>; /* 64M */ }; + + coldfire_memory: codefire_memory@9ef00000 { + reg = <0x9ef00000 0x00100000>; + no-map; + }; }; leds { @@ -49,11 +54,15 @@ }; fsi: gpio-fsi { - compatible = "fsi-master-gpio", "fsi-master"; + compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master"; #address-cells = <2>; #size-cells = <0>; no-gpio-delays; + memory-region = <&coldfire_memory>; + aspeed,sram = <&sram>; + aspeed,cvic = <&cvic>; + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>; @@ -76,6 +85,11 @@ linux,code = <ASPEED_GPIO(Q, 7)>; }; }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; }; &fmc { @@ -274,3 +288,11 @@ &ibt { status = "okay"; }; + +&vhub { + status = "okay"; +}; + +&adc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts index 656036106001..ad54117c075e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -56,6 +56,11 @@ }; }; + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; + gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; @@ -583,3 +588,7 @@ &ibt { status = "okay"; }; + +&adc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts index 43ed13963d35..33d704541de6 100644 --- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts +++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts @@ -17,7 +17,7 @@ bootargs = "console=ttyS4,115200 earlyprintk"; }; - memory { + memory@80000000 { reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts index 911d2c7c1500..0f6d335125e2 100644 --- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts +++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts @@ -60,6 +60,8 @@ power-supply = <&bl_reg>; enable-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_blon>; }; panel: panel { @@ -164,6 +166,12 @@ (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; }; + + pinctrl_blon: blon { + atmel,pins = <AT91_PIOA 20 AT91_PERIPH_GPIO + (AT91_PINCTRL_OUTPUT | + AT91_PINCTRL_OUTPUT_VAL(0))>; + }; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 363a43d77424..4a258867ddf1 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -165,7 +165,7 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&flx1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus_i2c>; atmel,fifo-size = <16>; @@ -211,7 +211,7 @@ compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&flx3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "usart"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx3_default>; @@ -223,7 +223,7 @@ compatible = "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&flx3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "spi_clk"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx3_default>; @@ -240,7 +240,7 @@ compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&flx4_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "usart"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; @@ -252,7 +252,7 @@ compatible = "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&flx4_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "spi_clk"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>; @@ -268,7 +268,7 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&flx4_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; atmel,fifo-size = <16>; diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts index 2214bfe7aa20..ba7f3e646c26 100644 --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -197,7 +197,7 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&flx0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx0_default>; atmel,fifo-size = <16>; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 518e2b095ccf..fa54e8866f1e 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -258,7 +258,7 @@ compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&flx0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; clock-names = "usart"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx0_default>; @@ -313,7 +313,7 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&flx4_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; atmel,fifo-size = <16>; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 0702a2f2b336..12d5af938aa3 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -115,7 +115,7 @@ wm8904: codec@1a { compatible = "wlf,wm8904"; reg = <0x1a>; - clocks = <&pck2>; + clocks = <&pmc PMC_TYPE_SYSTEM 10>; clock-names = "mclk"; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 9118e29b6d6a..7cd9c3bc4dfb 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -113,276 +113,28 @@ compatible = "atmel,at91sam9260-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; - #clock-cells = <0>; - clocks = <&main_osc>; - }; - - slow_rc_osc: slow_rc_osc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - }; - - clk32k: slck { - compatible = "atmel,at91sam9260-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc>, <&slow_xtal>; - }; - - plla: pllack { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <1000000 32000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <80000000 160000000 0 1>, - <150000000 240000000 2 1>; - }; - - pllb: pllbck { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKB>; - clocks = <&main>; - reg = <1>; - atmel,clk-input-range = <1000000 5000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <70000000 130000000 1 1>; - }; - - mck: masterck { - compatible = "atmel,at91rm9200-clk-master"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; - atmel,clk-output-range = <0 105000000>; - atmel,clk-divisors = <1 2 4 0>; - }; - - usb: usbck { - compatible = "atmel,at91rm9200-clk-usb"; - #clock-cells = <0>; - atmel,clk-divisors = <1 2 4 0>; - clocks = <&pllb>; - }; - - prog: progck { - compatible = "atmel,at91rm9200-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - udpck: udpck { - #clock-cells = <0>; - reg = <7>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - }; - - periphck { - compatible = "atmel,at91rm9200-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <2>; - }; - - pioB_clk: pioB_clk { - #clock-cells = <0>; - reg = <3>; - }; - - pioC_clk: pioC_clk { - #clock-cells = <0>; - reg = <4>; - }; - - adc_clk: adc_clk { - #clock-cells = <0>; - reg = <5>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <6>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <7>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <8>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <9>; - }; - - udc_clk: udc_clk { - #clock-cells = <0>; - reg = <10>; - }; - - twi0_clk: twi0_clk { - reg = <11>; - #clock-cells = <0>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <12>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <13>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <14>; - }; - - tc0_clk: tc0_clk { - #clock-cells = <0>; - reg = <17>; - }; - - tc1_clk: tc1_clk { - #clock-cells = <0>; - reg = <18>; - }; - - tc2_clk: tc2_clk { - #clock-cells = <0>; - reg = <19>; - }; - - ohci_clk: ohci_clk { - #clock-cells = <0>; - reg = <20>; - }; - - macb0_clk: macb0_clk { - #clock-cells = <0>; - reg = <21>; - }; - - isi_clk: isi_clk { - #clock-cells = <0>; - reg = <22>; - }; - - usart3_clk: usart3_clk { - #clock-cells = <0>; - reg = <23>; - }; - - uart0_clk: uart0_clk { - #clock-cells = <0>; - reg = <24>; - }; - - uart1_clk: uart1_clk { - #clock-cells = <0>; - reg = <25>; - }; - - tc3_clk: tc3_clk { - #clock-cells = <0>; - reg = <26>; - }; - - tc4_clk: tc4_clk { - #clock-cells = <0>; - reg = <27>; - }; - - tc5_clk: tc5_clk { - #clock-cells = <0>; - reg = <28>; - }; - }; + #clock-cells = <2>; + clocks = <&slow_xtal>, <&main_xtal>; + clock-names = "slow_xtal", "main_xtal"; }; rstc@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; - clocks = <&clk32k>; + clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>; }; shdwc@fffffd10 { compatible = "atmel,at91sam9260-shdwc"; reg = <0xfffffd10 0x10>; - clocks = <&clk32k>; + clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>; }; pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; tcb0: timer@fffa0000 { @@ -393,7 +145,7 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 18 IRQ_TYPE_LEVEL_HIGH 0 19 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&pmc PMC_TYPE_CORE PMC_SLOW>; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; @@ -405,7 +157,7 @@ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0 27 IRQ_TYPE_LEVEL_HIGH 0 28 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 28>, <&pmc PMC_TYPE_CORE PMC_SLOW>; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; @@ -746,7 +498,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioB: gpio@fffff600 { @@ -757,7 +509,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; pioC: gpio@fffff800 { @@ -768,7 +520,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioC_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; }; }; @@ -778,7 +530,7 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "usart"; status = "disabled"; }; @@ -791,7 +543,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; status = "disabled"; }; @@ -804,7 +556,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; @@ -817,7 +569,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; status = "disabled"; }; @@ -830,7 +582,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; - clocks = <&usart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "usart"; status = "disabled"; }; @@ -843,7 +595,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; - clocks = <&uart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; clock-names = "usart"; status = "disabled"; }; @@ -856,7 +608,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - clocks = <&uart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>; clock-names = "usart"; status = "disabled"; }; @@ -867,7 +619,7 @@ interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; - clocks = <&macb0_clk>, <&macb0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -876,7 +628,7 @@ compatible = "atmel,at91sam9260-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udc_clk>, <&udpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>; clock-names = "pclk", "hclk"; status = "disabled"; }; @@ -887,7 +639,7 @@ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; status = "disabled"; }; @@ -898,7 +650,7 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "mci_clk"; status = "disabled"; }; @@ -909,7 +661,7 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "pclk"; status = "disabled"; }; @@ -922,7 +674,7 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "spi_clk"; status = "disabled"; }; @@ -935,7 +687,7 @@ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "spi_clk"; status = "disabled"; }; @@ -946,7 +698,7 @@ compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&adc_clk>, <&adc_op_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&adc_op_clk>; clock-names = "adc_clk", "adc_op_clk"; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xf>; @@ -981,7 +733,7 @@ compatible = "atmel,at91sam9260-rtt"; reg = <0xfffffd20 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&clk32k>; + clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>; status = "disabled"; }; @@ -989,7 +741,7 @@ compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&clk32k>; + clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; @@ -1007,7 +759,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1027,7 +779,7 @@ 0x5 0x0 0x60000000 0x10000000 0x6 0x0 0x70000000 0x10000000 0x7 0x0 0x80000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 33f09d5ea020..01d700b63b45 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -75,7 +75,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&ohci_clk>, <&hclk0>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 16>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -86,7 +86,7 @@ interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fb>; - clocks = <&lcd_clk>, <&hclk1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_SYSTEM 17>; clock-names = "lcdc_clk", "hclk"; status = "disabled"; }; @@ -106,7 +106,7 @@ 0x5 0x0 0x60000000 0x10000000 0x6 0x0 0x70000000 0x10000000 0x7 0x0 0x80000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { @@ -132,7 +132,7 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>, <18 IRQ_TYPE_LEVEL_HIGH 0>, <19 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; @@ -140,7 +140,7 @@ compatible = "atmel,at91sam9261-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udc_clk>, <&udpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>; clock-names = "pclk", "hclk"; atmel,matrix = <&matrix>; status = "disabled"; @@ -154,7 +154,7 @@ pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "mci_clk"; status = "disabled"; }; @@ -167,7 +167,7 @@ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; status = "disabled"; }; @@ -179,7 +179,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; status = "disabled"; }; @@ -192,7 +192,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; @@ -205,7 +205,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; status = "disabled"; }; @@ -216,7 +216,7 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "pclk"; status = "disabled"; }; @@ -227,7 +227,7 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; - clocks = <&ssc1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "pclk"; status = "disabled"; }; @@ -238,7 +238,7 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; - clocks = <&ssc2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "pclk"; status = "disabled"; }; @@ -252,7 +252,7 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "spi_clk"; status = "disabled"; }; @@ -265,7 +265,7 @@ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "spi_clk"; status = "disabled"; }; @@ -299,7 +299,7 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "usart"; status = "disabled"; }; @@ -563,7 +563,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioB: gpio@fffff600 { @@ -574,7 +574,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; pioC: gpio@fffff800 { @@ -585,7 +585,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioC_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; }; }; @@ -593,250 +593,9 @@ compatible = "atmel,at91sam9261-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; - #clock-cells = <0>; - clocks = <&main_osc>; - }; - - plla: pllack { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <1000000 32000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, - <190000000 240000000 2 1>; - }; - - pllb: pllbck { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKB>; - clocks = <&main>; - reg = <1>; - atmel,clk-input-range = <1000000 5000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <70000000 130000000 1 1>; - }; - - mck: masterck { - compatible = "atmel,at91rm9200-clk-master"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; - atmel,clk-output-range = <0 94000000>; - atmel,clk-divisors = <1 2 4 0>; - }; - - usb: usbck { - compatible = "atmel,at91rm9200-clk-usb"; - #clock-cells = <0>; - atmel,clk-divisors = <1 2 4 0>; - clocks = <&pllb>; - }; - - prog: progck { - compatible = "atmel,at91rm9200-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - - prog2: prog2 { - #clock-cells = <0>; - reg = <2>; - interrupts = <AT91_PMC_PCKRDY(2)>; - }; - - prog3: prog3 { - #clock-cells = <0>; - reg = <3>; - interrupts = <AT91_PMC_PCKRDY(3)>; - }; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - udpck: udpck { - #clock-cells = <0>; - reg = <7>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - - pck2: pck2 { - #clock-cells = <0>; - reg = <10>; - clocks = <&prog2>; - }; - - pck3: pck3 { - #clock-cells = <0>; - reg = <11>; - clocks = <&prog3>; - }; - - hclk0: hclk0 { - #clock-cells = <0>; - reg = <16>; - clocks = <&mck>; - }; - - hclk1: hclk1 { - #clock-cells = <0>; - reg = <17>; - clocks = <&mck>; - }; - }; - - periphck { - compatible = "atmel,at91rm9200-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <2>; - }; - - pioB_clk: pioB_clk { - #clock-cells = <0>; - reg = <3>; - }; - - pioC_clk: pioC_clk { - #clock-cells = <0>; - reg = <4>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <6>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <7>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <8>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <9>; - }; - - udc_clk: udc_clk { - #clock-cells = <0>; - reg = <10>; - }; - - twi0_clk: twi0_clk { - reg = <11>; - #clock-cells = <0>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <12>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <13>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <14>; - }; - - ssc1_clk: ssc1_clk { - #clock-cells = <0>; - reg = <15>; - }; - - ssc2_clk: ssc2_clk { - #clock-cells = <0>; - reg = <16>; - }; - - tc0_clk: tc0_clk { - #clock-cells = <0>; - reg = <17>; - }; - - tc1_clk: tc1_clk { - #clock-cells = <0>; - reg = <18>; - }; - - tc2_clk: tc2_clk { - #clock-cells = <0>; - reg = <19>; - }; - - ohci_clk: ohci_clk { - #clock-cells = <0>; - reg = <20>; - }; - - lcd_clk: lcd_clk { - #clock-cells = <0>; - reg = <21>; - }; - }; + #clock-cells = <2>; + clocks = <&slow_xtal>, <&main_xtal>; + clock-names = "slow_xtal", "main_xtal"; }; rstc@fffffd00 { @@ -855,7 +614,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; rtc@fffffd20 { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index af68a86c9973..c5766da4e54e 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -96,264 +96,9 @@ compatible = "atmel,at91sam9263-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; - #clock-cells = <0>; - clocks = <&main_osc>; - }; - - plla: pllack { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <1000000 32000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, - <190000000 240000000 2 1>; - }; - - pllb: pllbck { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKB>; - clocks = <&main>; - reg = <1>; - atmel,clk-input-range = <1000000 32000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, - <190000000 240000000 2 1>; - }; - - mck: masterck { - compatible = "atmel,at91rm9200-clk-master"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; - atmel,clk-output-range = <0 120000000>; - atmel,clk-divisors = <1 2 4 0>; - }; - - usb: usbck { - compatible = "atmel,at91rm9200-clk-usb"; - #clock-cells = <0>; - atmel,clk-divisors = <1 2 4 0>; - clocks = <&pllb>; - }; - - prog: progck { - compatible = "atmel,at91rm9200-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - - prog2: prog2 { - #clock-cells = <0>; - reg = <2>; - interrupts = <AT91_PMC_PCKRDY(2)>; - }; - - prog3: prog3 { - #clock-cells = <0>; - reg = <3>; - interrupts = <AT91_PMC_PCKRDY(3)>; - }; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - udpck: udpck { - #clock-cells = <0>; - reg = <7>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - - pck2: pck2 { - #clock-cells = <0>; - reg = <10>; - clocks = <&prog2>; - }; - - pck3: pck3 { - #clock-cells = <0>; - reg = <11>; - clocks = <&prog3>; - }; - }; - - periphck { - compatible = "atmel,at91rm9200-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <2>; - }; - - pioB_clk: pioB_clk { - #clock-cells = <0>; - reg = <3>; - }; - - pioCDE_clk: pioCDE_clk { - #clock-cells = <0>; - reg = <4>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <7>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <8>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <9>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <10>; - }; - - mci1_clk: mci1_clk { - #clock-cells = <0>; - reg = <11>; - }; - - can_clk: can_clk { - #clock-cells = <0>; - reg = <12>; - }; - - twi0_clk: twi0_clk { - #clock-cells = <0>; - reg = <13>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <14>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <15>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <16>; - }; - - ssc1_clk: ssc1_clk { - #clock-cells = <0>; - reg = <17>; - }; - - ac97_clk: ac97_clk { - #clock-cells = <0>; - reg = <18>; - }; - - tcb_clk: tcb_clk { - #clock-cells = <0>; - reg = <19>; - }; - - pwm_clk: pwm_clk { - #clock-cells = <0>; - reg = <20>; - }; - - macb0_clk: macb0_clk { - #clock-cells = <0>; - reg = <21>; - }; - - g2de_clk: g2de_clk { - #clock-cells = <0>; - reg = <23>; - }; - - udc_clk: udc_clk { - #clock-cells = <0>; - reg = <24>; - }; - - isi_clk: isi_clk { - #clock-cells = <0>; - reg = <25>; - }; - - lcd_clk: lcd_clk { - #clock-cells = <0>; - reg = <26>; - }; - - dma_clk: dma_clk { - #clock-cells = <0>; - reg = <27>; - }; - - ohci_clk: ohci_clk { - #clock-cells = <0>; - reg = <29>; - }; - }; + #clock-cells = <2>; + clocks = <&slow_xtal>, <&main_xtal>; + clock-names = "slow_xtal", "main_xtal"; }; ramc0: ramc@ffffe200 { @@ -385,7 +130,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; tcb0: timer@fff7c000 { @@ -394,7 +139,7 @@ #size-cells = <0>; reg = <0xfff7c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb_clk>, <&slow_xtal>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>; clock-names = "t0_clk", "slow_clk"; }; @@ -736,7 +481,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioB: gpio@fffff400 { @@ -747,7 +492,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; pioC: gpio@fffff600 { @@ -758,7 +503,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioCDE_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; }; pioD: gpio@fffff800 { @@ -769,7 +514,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioCDE_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; }; pioE: gpio@fffffa00 { @@ -780,7 +525,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioCDE_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; }; }; @@ -790,7 +535,7 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "usart"; status = "disabled"; }; @@ -803,7 +548,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; @@ -816,7 +561,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; status = "disabled"; }; @@ -829,7 +574,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "usart"; status = "disabled"; }; @@ -840,7 +585,7 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "pclk"; status = "disabled"; }; @@ -851,7 +596,7 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; - clocks = <&ssc1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>; clock-names = "pclk"; status = "disabled"; }; @@ -862,7 +607,7 @@ interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ac97>; - clocks = <&ac97_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; clock-names = "ac97_clk"; status = "disabled"; }; @@ -873,7 +618,7 @@ interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; - clocks = <&macb0_clk>, <&macb0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -882,7 +627,7 @@ compatible = "atmel,at91sam9263-udc"; reg = <0xfff78000 0x4000>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udc_clk>, <&udpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_SYSTEM 7>; clock-names = "pclk", "hclk"; status = "disabled"; }; @@ -893,7 +638,7 @@ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; status = "disabled"; }; @@ -904,7 +649,7 @@ pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; clock-names = "mci_clk"; status = "disabled"; }; @@ -916,7 +661,7 @@ pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; clock-names = "mci_clk"; status = "disabled"; }; @@ -940,7 +685,7 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "spi_clk"; status = "disabled"; }; @@ -953,7 +698,7 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "spi_clk"; status = "disabled"; }; @@ -963,7 +708,7 @@ reg = <0xfffb8000 0x300>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; - clocks = <&pwm_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; clock-names = "pwm_clk"; status = "disabled"; }; @@ -974,7 +719,7 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can_rx_tx>; - clocks = <&can_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "can_clk"; }; @@ -1007,7 +752,7 @@ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fb>; - clocks = <&lcd_clk>, <&lcd_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 26>; clock-names = "lcdc_clk", "hclk"; status = "disabled"; }; @@ -1016,7 +761,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1034,7 +779,7 @@ 0x3 0x0 0x40000000 0x10000000 0x4 0x0 0x50000000 0x10000000 0x5 0x0 0x60000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller0: nand-controller { @@ -1055,7 +800,7 @@ reg = <0x80000000 0x20000000>; ranges = <0x0 0x0 0x80000000 0x10000000 0x1 0x0 0x90000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller1: nand-controller { diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi index 27de7dc0f0e0..b34a6c65bd44 100644 --- a/arch/arm/boot/dts/at91sam9g15.dtsi +++ b/arch/arm/boot/dts/at91sam9g15.dtsi @@ -24,6 +24,10 @@ 0x003fffff 0x003f8000 0x00000000 /* pioD */ >; }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91sam9g15-pmc", "atmel,at91sam9x5-pmc", "syscon"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 90705ee6008b..e976fd6bc6fd 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -40,28 +40,7 @@ }; pmc: pmc@fffffc00 { - plla: pllack { - atmel,clk-input-range = <2000000 32000000>; - atmel,pll-clk-output-ranges = <745000000 800000000 0 0>, - <695000000 750000000 1 0>, - <645000000 700000000 2 0>, - <595000000 650000000 3 0>, - <545000000 600000000 0 1>, - <495000000 550000000 1 1>, - <445000000 500000000 2 1>, - <400000000 450000000 3 1>; - }; - - pllb: pllbck { - compatible = "atmel,at91sam9g20-clk-pllb"; - atmel,clk-input-range = <2000000 32000000>; - atmel,pll-clk-output-ranges = <30000000 100000000 0 0>; - }; - - mck: masterck { - atmel,clk-output-range = <0 133000000>; - atmel,clk-divisors = <1 2 4 6>; - }; + compatible = "atmel,at91sam9g20-pmc", "atmel,at91sam9260-pmc", "syscon"; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi index 0898213f3bb2..d8bb56253e64 100644 --- a/arch/arm/boot/dts/at91sam9g25.dtsi +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -26,6 +26,10 @@ 0x003fffff 0x003f8000 0x00000000 /* pioD */ >; }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91sam9g25-pmc", "atmel,at91sam9x5-pmc", "syscon"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 31fecc2cdaf9..ac730812a81d 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -32,9 +32,9 @@ pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>; pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>; - clocks = <&pck0>; + clocks = <&pmc PMC_TYPE_SYSTEM 8>; clock-names = "xvclk"; - assigned-clocks = <&pck0>; + assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>; assigned-clock-rates = <25000000>; status = "okay"; diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi index ff4115886f97..333e158feb61 100644 --- a/arch/arm/boot/dts/at91sam9g35.dtsi +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -25,6 +25,10 @@ 0x003fffff 0x003f8000 0x00000000 /* pioD */ >; }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91sam9g35-pmc", "atmel,at91sam9x5-pmc", "syscon"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 8fb22030f00b..3862ff2f26e0 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -88,7 +88,7 @@ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fb>; - clocks = <&lcd_clk>, <&lcd_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "hclk", "lcdc_clk"; status = "disabled"; }; @@ -106,7 +106,7 @@ 0x3 0x0 0x40000000 0x10000000 0x4 0x0 0x50000000 0x10000000 0x5 0x0 0x60000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { @@ -132,7 +132,7 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>, <17 IRQ_TYPE_LEVEL_HIGH 0>, <18 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>, <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; @@ -143,7 +143,7 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; clock-names = "mci_clk"; status = "disabled"; }; @@ -154,7 +154,7 @@ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; status = "disabled"; }; @@ -175,7 +175,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; status = "disabled"; }; @@ -188,7 +188,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; @@ -201,7 +201,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; status = "disabled"; }; @@ -214,7 +214,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; - clocks = <&usart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "usart"; status = "disabled"; }; @@ -242,7 +242,7 @@ reg = <0xfffc8000 0x300>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; - clocks = <&pwm_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; clock-names = "pwm_clk"; status = "disabled"; }; @@ -255,7 +255,7 @@ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "spi_clk"; status = "disabled"; }; @@ -266,7 +266,7 @@ compatible = "atmel,at91sam9rl-adc"; reg = <0xfffd0000 0x100>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&adc_clk>, <&adc_op_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>; clock-names = "adc_clk", "adc_op_clk"; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0x3f>; @@ -304,7 +304,7 @@ reg = <0x00600000 0x100000>, <0xfffd4000 0x4000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udphs_clk>, <&utmi>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; @@ -366,7 +366,7 @@ reg = <0xffffe600 0x200>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; - clocks = <&dma0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "dma_clk"; }; @@ -399,7 +399,7 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "usart"; status = "disabled"; }; @@ -794,7 +794,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioB: gpio@fffff600 { @@ -805,7 +805,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; pioC: gpio@fffff800 { @@ -816,7 +816,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioC_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; }; pioD: gpio@fffffa00 { @@ -827,7 +827,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioD_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; }; }; @@ -835,202 +835,9 @@ compatible = "atmel,at91sam9rl-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - plla: pllack { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <1000000 32000000>; - #atmel,pll-clk-output-range-cells = <3>; - atmel,pll-clk-output-ranges = <80000000 200000000 0>, - <190000000 240000000 2>; - }; - - utmi: utmick { - compatible = "atmel,at91sam9x5-clk-utmi"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_LOCKU>; - clocks = <&main>; - }; - - mck: masterck { - compatible = "atmel,at91rm9200-clk-master"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plla>, <&utmi>; - atmel,clk-output-range = <0 94000000>; - atmel,clk-divisors = <1 2 4 0>; - }; - - prog: progck { - compatible = "atmel,at91rm9200-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plla>, <&utmi>, <&mck>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - - }; - - periphck { - compatible = "atmel,at91rm9200-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <2>; - }; - - pioB_clk: pioB_clk { - #clock-cells = <0>; - reg = <3>; - }; - - pioC_clk: pioC_clk { - #clock-cells = <0>; - reg = <4>; - }; - - pioD_clk: pioD_clk { - #clock-cells = <0>; - reg = <5>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <6>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <7>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <8>; - }; - - usart3_clk: usart3_clk { - #clock-cells = <0>; - reg = <9>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <10>; - }; - - twi0_clk: twi0_clk { - #clock-cells = <0>; - reg = <11>; - }; - - twi1_clk: twi1_clk { - #clock-cells = <0>; - reg = <12>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <13>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <14>; - }; - - ssc1_clk: ssc1_clk { - #clock-cells = <0>; - reg = <15>; - }; - - tc0_clk: tc0_clk { - #clock-cells = <0>; - reg = <16>; - }; - - tc1_clk: tc1_clk { - #clock-cells = <0>; - reg = <17>; - }; - - tc2_clk: tc2_clk { - #clock-cells = <0>; - reg = <18>; - }; - - pwm_clk: pwm_clk { - #clock-cells = <0>; - reg = <19>; - }; - - adc_clk: adc_clk { - #clock-cells = <0>; - reg = <20>; - }; - - dma0_clk: dma0_clk { - #clock-cells = <0>; - reg = <21>; - }; - - udphs_clk: udphs_clk { - #clock-cells = <0>; - reg = <22>; - }; - - lcd_clk: lcd_clk { - #clock-cells = <0>; - reg = <23>; - }; - }; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; }; rstc@fffffd00 { @@ -1049,7 +856,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; watchdog@fffffd40 { diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi index 3c5fa3388997..a99703a262c9 100644 --- a/arch/arm/boot/dts/at91sam9x25.dtsi +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -27,6 +27,10 @@ 0x003fffff 0x003f8000 0x00000000 /* pioD */ >; }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91sam9x25-pmc", "atmel,at91sam9x5-pmc", "syscon"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi index d9054e8167b7..bca274d33f68 100644 --- a/arch/arm/boot/dts/at91sam9x35.dtsi +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -26,6 +26,10 @@ 0x003fffff 0x003f8000 0x00000000 /* pioD */ >; }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91sam9x35-pmc", "atmel,at91sam9x5-pmc", "syscon"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 11c0ef102ab1..07443a387a8f 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -111,7 +111,7 @@ ramc0: ramc@ffffe800 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe800 0x200>; - clocks = <&ddrck>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>; clock-names = "ddrck"; }; @@ -124,269 +124,9 @@ compatible = "atmel,at91sam9x5-pmc", "syscon"; reg = <0xfffffc00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_rc_osc: main_rc_osc { - compatible = "atmel,at91sam9x5-clk-main-rc-osc"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCRCS>; - clock-frequency = <12000000>; - clock-accuracy = <50000000>; - }; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91sam9x5-clk-main"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCSELS>; - clocks = <&main_rc_osc>, <&main_osc>; - }; - - plla: pllack { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <2000000 32000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <745000000 800000000 0 0 - 695000000 750000000 1 0 - 645000000 700000000 2 0 - 595000000 650000000 3 0 - 545000000 600000000 0 1 - 495000000 555000000 1 1 - 445000000 500000000 2 1 - 400000000 450000000 3 1>; - }; - - plladiv: plladivck { - compatible = "atmel,at91sam9x5-clk-plldiv"; - #clock-cells = <0>; - clocks = <&plla>; - }; - - utmi: utmick { - compatible = "atmel,at91sam9x5-clk-utmi"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKU>; - clocks = <&main>; - }; - - mck: masterck { - compatible = "atmel,at91sam9x5-clk-master"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; - atmel,clk-output-range = <0 133333333>; - atmel,clk-divisors = <1 2 4 3>; - atmel,master-clk-have-div3-pres; - }; - - usb: usbck { - compatible = "atmel,at91sam9x5-clk-usb"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - prog: progck { - compatible = "atmel,at91sam9x5-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - }; - - smd: smdclk { - compatible = "atmel,at91sam9x5-clk-smd"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - ddrck: ddrck { - #clock-cells = <0>; - reg = <2>; - clocks = <&mck>; - }; - - smdck: smdck { - #clock-cells = <0>; - reg = <4>; - clocks = <&smd>; - }; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - udpck: udpck { - #clock-cells = <0>; - reg = <7>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - }; - - periphck { - compatible = "atmel,at91sam9x5-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - pioAB_clk: pioAB_clk { - #clock-cells = <0>; - reg = <2>; - }; - - pioCD_clk: pioCD_clk { - #clock-cells = <0>; - reg = <3>; - }; - - smd_clk: smd_clk { - #clock-cells = <0>; - reg = <4>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <5>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <6>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <7>; - }; - - twi0_clk: twi0_clk { - reg = <9>; - #clock-cells = <0>; - }; - - twi1_clk: twi1_clk { - #clock-cells = <0>; - reg = <10>; - }; - - twi2_clk: twi2_clk { - #clock-cells = <0>; - reg = <11>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <12>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <13>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <14>; - }; - - uart0_clk: uart0_clk { - #clock-cells = <0>; - reg = <15>; - }; - - uart1_clk: uart1_clk { - #clock-cells = <0>; - reg = <16>; - }; - - tcb0_clk: tcb0_clk { - #clock-cells = <0>; - reg = <17>; - }; - - pwm_clk: pwm_clk { - #clock-cells = <0>; - reg = <18>; - }; - - adc_clk: adc_clk { - #clock-cells = <0>; - reg = <19>; - }; - - dma0_clk: dma0_clk { - #clock-cells = <0>; - reg = <20>; - }; - - dma1_clk: dma1_clk { - #clock-cells = <0>; - reg = <21>; - }; - - uhphs_clk: uhphs_clk { - #clock-cells = <0>; - reg = <22>; - }; - - udphs_clk: udphs_clk { - #clock-cells = <0>; - reg = <23>; - }; - - mci1_clk: mci1_clk { - #clock-cells = <0>; - reg = <26>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <28>; - }; - }; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; }; reset_controller: rstc@fffffe00 { @@ -405,7 +145,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; sckc@fffffe50 { @@ -438,7 +178,7 @@ #size-cells = <0>; reg = <0xf8008000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -448,7 +188,7 @@ #size-cells = <0>; reg = <0xf800c000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -457,7 +197,7 @@ reg = <0xffffec00 0x200>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; - clocks = <&dma0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; clock-names = "dma_clk"; }; @@ -466,7 +206,7 @@ reg = <0xffffee00 0x200>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; - clocks = <&dma1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "dma_clk"; }; @@ -864,7 +604,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioAB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioB: gpio@fffff600 { @@ -876,7 +616,7 @@ #gpio-lines = <19>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioAB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioC: gpio@fffff800 { @@ -887,7 +627,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioCD_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; pioD: gpio@fffffa00 { @@ -899,7 +639,7 @@ #gpio-lines = <22>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioCD_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; }; @@ -912,7 +652,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; clock-names = "pclk"; status = "disabled"; }; @@ -924,7 +664,7 @@ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; pinctrl-names = "default"; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; @@ -938,7 +678,7 @@ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; pinctrl-names = "default"; - clocks = <&mci1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>; clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; @@ -954,7 +694,7 @@ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>, <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>; dma-names = "tx", "rx"; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "usart"; status = "disabled"; }; @@ -968,7 +708,7 @@ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>, <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; dma-names = "tx", "rx"; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; clock-names = "usart"; status = "disabled"; }; @@ -982,7 +722,7 @@ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>, <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>; dma-names = "tx", "rx"; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; status = "disabled"; }; @@ -996,7 +736,7 @@ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>, <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>; dma-names = "tx", "rx"; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; @@ -1012,7 +752,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; status = "disabled"; }; @@ -1027,7 +767,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&twi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; status = "disabled"; }; @@ -1042,7 +782,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; - clocks = <&twi2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; status = "disabled"; }; @@ -1052,7 +792,7 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; - clocks = <&uart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "usart"; status = "disabled"; }; @@ -1063,7 +803,7 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - clocks = <&uart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "usart"; status = "disabled"; }; @@ -1074,7 +814,7 @@ compatible = "atmel,at91sam9x5-adc"; reg = <0xf804c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&adc_clk>, + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>, <&adc_op_clk>; clock-names = "adc_clk", "adc_op_clk"; atmel,adc-use-external-triggers; @@ -1121,7 +861,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "spi_clk"; status = "disabled"; }; @@ -1137,7 +877,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "spi_clk"; status = "disabled"; }; @@ -1149,7 +889,7 @@ reg = <0x00500000 0x80000 0xf803c000 0x400>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&utmi>, <&udphs_clk>; + clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "hclk", "pclk"; status = "disabled"; @@ -1229,7 +969,7 @@ compatible = "atmel,at91sam9rl-pwm"; reg = <0xf8034000 0x300>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; - clocks = <&pwm_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; #pwm-cells = <3>; status = "disabled"; }; @@ -1239,7 +979,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1248,7 +988,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>; + clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; @@ -1266,7 +1006,7 @@ 0x3 0x0 0x40000000 0x10000000 0x4 0x0 0x50000000 0x10000000 0x5 0x0 0x60000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi index 8eb2f9c1b978..125f9e3b49ad 100644 --- a/arch/arm/boot/dts/at91sam9x5_can.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi @@ -13,27 +13,13 @@ / { ahb { apb { - pmc: pmc@fffffc00 { - periphck { - can0_clk: can0_clk { - #clock-cells = <0>; - reg = <29>; - }; - - can1_clk: can1_clk { - #clock-cells = <0>; - reg = <30>; - }; - }; - }; - can0: can@f8000000 { compatible = "atmel,at91sam9x5-can"; reg = <0xf8000000 0x300>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can0_rx_tx>; - clocks = <&can0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>; clock-names = "can_clk"; status = "disabled"; }; @@ -44,7 +30,7 @@ interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_rx_tx>; - clocks = <&can1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; clock-names = "can_clk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi index 8fc45ca4dcb5..c3e45b57b6a2 100644 --- a/arch/arm/boot/dts/at91sam9x5_isi.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi @@ -44,22 +44,13 @@ }; }; - pmc: pmc@fffffc00 { - periphck { - isi_clk: isi_clk { - #clock-cells = <0>; - reg = <25>; - }; - }; - }; - isi: isi@f8048000 { compatible = "atmel,at91sam9g45-isi"; reg = <0xf8048000 0x4000>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_isi_data_0_7>; - clocks = <&isi_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>; clock-names = "isi_clk"; status = "disabled"; port { diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi index 1629db9dd563..12595fb11691 100644 --- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi @@ -17,7 +17,7 @@ compatible = "atmel,at91sam9x5-hlcdc"; reg = <0xf8038000 0x4000>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>; clock-names = "periph_clk","sys_clk", "slow_clk"; status = "disabled"; @@ -143,23 +143,6 @@ }; }; }; - - pmc: pmc@fffffc00 { - periphck { - lcdc_clk: lcdc_clk { - #clock-cells = <0>; - reg = <25>; - }; - }; - - systemck { - lcdck: lcdck { - #clock-cells = <0>; - reg = <3>; - clocks = <&mck>; - }; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi index 73d7e30965ba..57c2e5a4fb53 100644 --- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi @@ -43,22 +43,13 @@ }; }; - pmc: pmc@fffffc00 { - periphck { - macb0_clk: macb0_clk { - #clock-cells = <0>; - reg = <24>; - }; - }; - }; - macb0: ethernet@f802c000 { compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_rmii>; - clocks = <&macb0_clk>, <&macb0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>; clock-names = "hclk", "pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi index d81980c40c7d..59b8da87d3c1 100644 --- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi @@ -31,22 +31,13 @@ }; }; - pmc: pmc@fffffc00 { - periphck { - macb1_clk: macb1_clk { - #clock-cells = <0>; - reg = <27>; - }; - }; - }; - macb1: ethernet@f8030000 { compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf8030000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb1_rmii>; - clocks = <&macb1_clk>, <&macb1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>; clock-names = "hclk", "pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi index a32d12b406a3..9102dfbed5d8 100644 --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -42,15 +42,6 @@ }; }; - pmc: pmc@fffffc00 { - periphck { - usart3_clk: usart3_clk { - #clock-cells = <0>; - reg = <8>; - }; - }; - }; - usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x200>; @@ -60,7 +51,7 @@ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>, <&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>; dma-names = "tx", "rx"; - clocks = <&usart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi index 043c717dcef1..bd83962d3627 100644 --- a/arch/arm/boot/dts/axp81x.dtsi +++ b/arch/arm/boot/dts/axp81x.dtsi @@ -48,6 +48,11 @@ interrupt-controller; #interrupt-cells = <1>; + ac_power_supply: ac-power-supply { + compatible = "x-powers,axp813-ac-power-supply"; + status = "disabled"; + }; + axp_adc: adc { compatible = "x-powers,axp813-adc"; #io-channel-cells = <1>; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 2fd111d9d59c..0d2538b46139 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -41,6 +41,14 @@ model = "Broadcom Northstar Plus SoC"; interrupt-parent = <&gic>; + aliases { + serial0 = &uart0; + serial1 = &uart1; + ethernet0 = &amac0; + ethernet1 = &amac1; + ethernet2 = &amac2; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index b7f79f1c431a..644d907bafbb 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts index 70362405c595..00323ba8f7de 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2016 Stefan Wahren <stefan.wahren@i2se.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index cb2d6d78a7fb..29f970f864dc 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -30,9 +30,9 @@ #power-domain-cells = <1>; }; - mailbox@7e00b840 { + vchiq: mailbox@7e00b840 { compatible = "brcm,bcm2835-vchiq"; - reg = <0x7e00b840 0xf>; + reg = <0x7e00b840 0x3c>; interrupts = <0 2>; }; }; diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index 2fef70a09953..ac4408b34b58 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; #include "bcm2836.dtsi" -#include "bcm2835-rpi.dtsi" +#include "bcm2836-rpi.dtsi" #include "bcm283x-rpi-smsc9514.dtsi" #include "bcm283x-rpi-usb-host.dtsi" diff --git a/arch/arm/boot/dts/bcm2836-rpi.dtsi b/arch/arm/boot/dts/bcm2836-rpi.dtsi new file mode 100644 index 000000000000..c4c858b984c6 --- /dev/null +++ b/arch/arm/boot/dts/bcm2836-rpi.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "bcm2835-rpi.dtsi" + +&vchiq { + compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq"; +}; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts index 93762244be7f..42bb09044cc7 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; #include "bcm2837.dtsi" -#include "bcm2835-rpi.dtsi" +#include "bcm2836-rpi.dtsi" #include "bcm283x-rpi-lan7515.dtsi" #include "bcm283x-rpi-usb-host.dtsi" diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index 89e6fd547c75..0c155dd4f396 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; #include "bcm2837.dtsi" -#include "bcm2835-rpi.dtsi" +#include "bcm2836-rpi.dtsi" #include "bcm283x-rpi-smsc9514.dtsi" #include "bcm283x-rpi-usb-host.dtsi" diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi index 7b7ab6aea988..4a89a1885a3d 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi +++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; #include "bcm2837.dtsi" -#include "bcm2835-rpi.dtsi" +#include "bcm2836-rpi.dtsi" / { memory { diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts new file mode 100644 index 000000000000..babcfec50dde --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2017 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "linksys,ea6500-v2", "brcm,bcm4708"; + model = "Linksys EA6500 V2"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi index 9829d044aaf4..ed13af028528 100644 --- a/arch/arm/boot/dts/bcm47081.dtsi +++ b/arch/arm/boot/dts/bcm47081.dtsi @@ -1,20 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Broadcom BCM470X / BCM5301X ARM platform code. * DTS for BCM47081 SoC. * * Copyright © 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH - * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, - * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM - * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE - * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. */ #include "bcm5301x.dtsi" diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi index c645fea2b7f7..e1bb8661955f 100644 --- a/arch/arm/boot/dts/bcm4709.dtsi +++ b/arch/arm/boot/dts/bcm4709.dtsi @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> - * - * Licensed under the ISC license. */ #include "bcm4708.dtsi" diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi index f7c3e274b354..cdc5ff593adb 100644 --- a/arch/arm/boot/dts/bcm47094.dtsi +++ b/arch/arm/boot/dts/bcm47094.dtsi @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> - * - * Licensed under the ISC license. */ #include "bcm4708.dtsi" diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts index 19e61b5b066c..e15e2a1e9d8c 100644 --- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> - * - * Licensed under the ISC license. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 7a5c188c2676..fd7af943fb0b 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -37,6 +37,8 @@ reg = <0x0400 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&iprocslow>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_uart1>; status = "disabled"; }; }; @@ -391,6 +393,48 @@ status = "disabled"; }; + dmu@1800c000 { + compatible = "simple-bus"; + ranges = <0 0x1800c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + cru@100 { + compatible = "simple-bus"; + reg = <0x100 0x1a4>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + pin-controller@1c0 { + compatible = "brcm,bcm4708-pinmux"; + reg = <0x1c0 0x24>; + reg-names = "cru_gpio_control"; + + spi-pins { + groups = "spi_grp"; + function = "spi"; + }; + + i2c { + groups = "i2c_grp"; + function = "i2c"; + }; + + pwm { + groups = "pwm0_grp", "pwm1_grp", + "pwm2_grp", "pwm3_grp"; + function = "pwm"; + }; + + pinmux_uart1: uart1 { + groups = "uart1_grp"; + function = "uart1"; + }; + }; + }; + }; + lcpll0: lcpll0@1800c100 { #clock-cells = <1>; compatible = "brcm,nsp-lcpll0"; diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index 453a2a37dabd..5054fa9eb0d0 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> - * - * Licensed under the ISC license. */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index 6df61518776f..f59764008b9c 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -143,6 +143,37 @@ reg = <0x4800e0 0x10>; #reset-cells = <2>; }; + + ahci: sata@8000 { + compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0xa000 0x9ac>, <0x8040 0x24>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&pmb0 3 1>; + reset-names = "ahci"; + status = "disabled"; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy0>; + }; + }; + + sata_phy: sata-phy@8100 { + compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3"; + reg = <0x8100 0x1e00>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; }; /* Legacy UBUS base */ diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index f9dd342cc2ae..21479b4ce823 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -39,10 +39,6 @@ model = "NorthStar Plus SVK (BCM958522ER)"; compatible = "brcm,bcm58522", "brcm,nsp"; - aliases { - serial0 = &uart0; - }; - chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index 374508a9cfbf..cda3d790965b 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -39,10 +39,6 @@ model = "NorthStar Plus SVK (BCM958525ER)"; compatible = "brcm,bcm58525", "brcm,nsp"; - aliases { - serial0 = &uart0; - }; - chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index 403250c5ad8e..f86649812b59 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -39,10 +39,6 @@ model = "NorthStar Plus XMC (BCM958525xmc)"; compatible = "brcm,bcm58525", "brcm,nsp"; - aliases { - serial0 = &uart0; - }; - chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index ecd05e26c262..df60602b054d 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -39,10 +39,6 @@ model = "NorthStar Plus SVK (BCM958622HR)"; compatible = "brcm,bcm58622", "brcm,nsp"; - aliases { - serial0 = &uart0; - }; - chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index f5e85b301497..3893e7af343a 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -39,10 +39,6 @@ model = "NorthStar Plus SVK (BCM958623HR)"; compatible = "brcm,bcm58623", "brcm,nsp"; - aliases { - serial0 = &uart0; - }; - chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index a53a2f629d74..cf226b02141f 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -39,10 +39,6 @@ model = "NorthStar Plus SVK (BCM958625HR)"; compatible = "brcm,bcm58625", "brcm,nsp"; - aliases { - serial0 = &uart0; - }; - chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 3ea5f739e90b..10b3d512bb33 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -38,11 +38,6 @@ model = "NorthStar Plus SVK (BCM958625K)"; compatible = "brcm,bcm58625", "brcm,nsp"; - aliases { - serial0 = &uart0; - serial1 = &uart1; - }; - chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts index c61673638fa8..8dca97eeaf57 100644 --- a/arch/arm/boot/dts/bcm963138dvt.dts +++ b/arch/arm/boot/dts/bcm963138dvt.dts @@ -41,3 +41,11 @@ brcm,nand-oob-sectors-size = <16>; }; }; + +&ahci { + status = "okay"; +}; + +&sata_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index ea9a0806b446..e39db14d805e 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -39,10 +39,6 @@ model = "NorthStar Plus SVK (BCM988312HR)"; compatible = "brcm,bcm88312", "brcm,nsp"; - aliases { - serial0 = &uart0; - }; - chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index 7e18147dc563..0d6f8647cc91 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -214,7 +214,7 @@ &atl { assigned-clocks = <&abe_dpll_sys_clk_mux>, - <&atl_clkctrl DRA7_ATL_CLKCTRL 26>, + <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>, <&dpll_abe_ck>, <&dpll_abe_m2x2_ck>, <&atl_clkin2_ck>; @@ -232,7 +232,7 @@ &mcasp3 { #sound-dai-cells = <0>; - assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>; + assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; assigned-clock-parents = <&atl_clkin2_ck>; status = "okay"; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi new file mode 100644 index 000000000000..bb45cb7fc3b6 --- /dev/null +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -0,0 +1,4600 @@ +&l4_cfg { /* 0x4a000000 */ + compatible = "ti,dra7-l4-cfg", "simple-bus"; + reg = <0x4a000000 0x800>, + <0x4a000800 0x800>, + <0x4a001000 0x1000>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4a000000 0x100000>, /* segment 0 */ + <0x00100000 0x4a100000 0x100000>, /* segment 1 */ + <0x00200000 0x4a200000 0x100000>; /* segment 2 */ + + segment@0 { /* 0x4a000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00000800 0x00000800 0x000800>, /* ap 1 */ + <0x00001000 0x00001000 0x001000>, /* ap 2 */ + <0x00002000 0x00002000 0x002000>, /* ap 3 */ + <0x00004000 0x00004000 0x001000>, /* ap 4 */ + <0x00005000 0x00005000 0x001000>, /* ap 5 */ + <0x00006000 0x00006000 0x001000>, /* ap 6 */ + <0x00008000 0x00008000 0x002000>, /* ap 7 */ + <0x0000a000 0x0000a000 0x001000>, /* ap 8 */ + <0x00056000 0x00056000 0x001000>, /* ap 9 */ + <0x00057000 0x00057000 0x001000>, /* ap 10 */ + <0x0005e000 0x0005e000 0x002000>, /* ap 11 */ + <0x00060000 0x00060000 0x001000>, /* ap 12 */ + <0x00080000 0x00080000 0x008000>, /* ap 13 */ + <0x00088000 0x00088000 0x001000>, /* ap 14 */ + <0x000a0000 0x000a0000 0x008000>, /* ap 15 */ + <0x000a8000 0x000a8000 0x001000>, /* ap 16 */ + <0x000d9000 0x000d9000 0x001000>, /* ap 17 */ + <0x000da000 0x000da000 0x001000>, /* ap 18 */ + <0x000dd000 0x000dd000 0x001000>, /* ap 19 */ + <0x000de000 0x000de000 0x001000>, /* ap 20 */ + <0x000e0000 0x000e0000 0x001000>, /* ap 21 */ + <0x000e1000 0x000e1000 0x001000>, /* ap 22 */ + <0x000f4000 0x000f4000 0x001000>, /* ap 23 */ + <0x000f5000 0x000f5000 0x001000>, /* ap 24 */ + <0x000f6000 0x000f6000 0x001000>, /* ap 25 */ + <0x000f7000 0x000f7000 0x001000>, /* ap 26 */ + <0x00090000 0x00090000 0x008000>, /* ap 59 */ + <0x00098000 0x00098000 0x001000>; /* ap 60 */ + + target-module@2000 { /* 0x4a002000, ap 3 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x2000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x2000>; + + scm: scm@0 { + compatible = "ti,dra7-scm-core", "simple-bus"; + reg = <0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + scm_conf: scm_conf@0 { + compatible = "syscon", "simple-bus"; + reg = <0x0 0x1400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x1400>; + + pbias_regulator: pbias_regulator@e00 { + compatible = "ti,pbias-dra7", "ti,pbias-omap"; + reg = <0xe00 0x4>; + syscon = <&scm_conf>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + + scm_conf_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + phy_sel: cpsw-phy-sel@554 { + compatible = "ti,dra7xx-cpsw-phy-sel"; + reg= <0x554 0x4>; + reg-names = "gmii-sel"; + }; + + dra7_pmx_core: pinmux@1400 { + compatible = "ti,dra7-padconf", + "pinctrl-single"; + reg = <0x1400 0x0468>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x3fffffff>; + }; + + scm_conf1: scm_conf@1c04 { + compatible = "syscon"; + reg = <0x1c04 0x0020>; + #syscon-cells = <2>; + }; + + scm_conf_pcie: scm_conf@1c24 { + compatible = "syscon"; + reg = <0x1c24 0x0024>; + }; + + sdma_xbar: dma-router@b78 { + compatible = "ti,dra7-dma-crossbar"; + reg = <0xb78 0xfc>; + #dma-cells = <1>; + dma-requests = <205>; + ti,dma-safe-map = <0>; + dma-masters = <&sdma>; + }; + + edma_xbar: dma-router@c78 { + compatible = "ti,dra7-dma-crossbar"; + reg = <0xc78 0x7c>; + #dma-cells = <2>; + dma-requests = <204>; + ti,dma-safe-map = <0>; + dma-masters = <&edma>; + }; + }; + }; + + target-module@5000 { /* 0x4a005000, ap 5 10.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5000 0x1000>; + + cm_core_aon: cm_core_aon@0 { + compatible = "ti,dra7-cm-core-aon", + "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x2000>; + ranges = <0 0 0x2000>; + + cm_core_aon_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_core_aon_clockdomains: clockdomains { + }; + }; + }; + + target-module@8000 { /* 0x4a008000, ap 7 0e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x8000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x2000>; + + cm_core: cm_core@0 { + compatible = "ti,dra7-cm-core", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x3000>; + ranges = <0 0 0x3000>; + + cm_core_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_core_clockdomains: clockdomains { + }; + }; + }; + + target-module@56000 { /* 0x4a056000, ap 9 02.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "dma_system"; + reg = <0x56000 0x4>, + <0x5602c 0x4>, + <0x56028 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): core_pwrdm, dma_clkdm */ + clocks = <&dma_clkctrl DRA7_DMA_DMA_SYSTEM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x56000 0x1000>; + + sdma: dma-controller@0 { + compatible = "ti,omap4430-sdma"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <32>; + dma-requests = <127>; + }; + }; + + target-module@5e000 { /* 0x4a05e000, ap 11 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5e000 0x2000>; + }; + + target-module@80000 { /* 0x4a080000, ap 13 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "ocp2scp1"; + reg = <0x80000 0x4>, + <0x80010 0x4>, + <0x80014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl DRA7_L3INIT_OCP2SCP1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x8000>; + + ocp2scp@0 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x8000>; + reg = <0x0 0x20>; + + usb2_phy1: phy@4000 { + compatible = "ti,dra7x-usb2", "ti,omap-usb2"; + reg = <0x4000 0x400>; + syscon-phy-power = <&scm_conf 0x300>; + clocks = <&usb_phy1_always_on_clk32k>, + <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>; + clock-names = "wkupclk", + "refclk"; + #phy-cells = <0>; + }; + + usb2_phy2: phy@5000 { + compatible = "ti,dra7x-usb2-phy2", + "ti,omap-usb2"; + reg = <0x5000 0x400>; + syscon-phy-power = <&scm_conf 0xe74>; + clocks = <&usb_phy2_always_on_clk32k>, + <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 8>; + clock-names = "wkupclk", + "refclk"; + #phy-cells = <0>; + }; + + usb3_phy1: phy@4400 { + compatible = "ti,omap-usb3"; + reg = <0x4400 0x80>, + <0x4800 0x64>, + <0x4c00 0x40>; + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + syscon-phy-power = <&scm_conf 0x370>; + clocks = <&usb_phy3_always_on_clk32k>, + <&sys_clkin1>, + <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>; + clock-names = "wkupclk", + "sysclk", + "refclk"; + #phy-cells = <0>; + }; + }; + }; + + target-module@90000 { /* 0x4a090000, ap 59 42.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "ocp2scp3"; + reg = <0x90000 0x4>, + <0x90010 0x4>, + <0x90014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl DRA7_L3INIT_OCP2SCP3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x90000 0x8000>; + + ocp2scp@0 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x8000>; + reg = <0x0 0x20>; + + pcie1_phy: pciephy@4000 { + compatible = "ti,phy-pipe3-pcie"; + reg = <0x4000 0x80>, /* phy_rx */ + <0x4400 0x64>; /* phy_tx */ + reg-names = "phy_rx", "phy_tx"; + syscon-phy-power = <&scm_conf_pcie 0x1c>; + syscon-pcs = <&scm_conf_pcie 0x10>; + clocks = <&dpll_pcie_ref_ck>, + <&dpll_pcie_ref_m2ldo_ck>, + <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 8>, + <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>, + <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>, + <&optfclk_pciephy_div>, + <&sys_clkin1>; + clock-names = "dpll_ref", "dpll_ref_m2", + "wkupclk", "refclk", + "div-clk", "phy-div", "sysclk"; + #phy-cells = <0>; + }; + + pcie2_phy: pciephy@5000 { + compatible = "ti,phy-pipe3-pcie"; + reg = <0x5000 0x80>, /* phy_rx */ + <0x5400 0x64>; /* phy_tx */ + reg-names = "phy_rx", "phy_tx"; + syscon-phy-power = <&scm_conf_pcie 0x20>; + syscon-pcs = <&scm_conf_pcie 0x10>; + clocks = <&dpll_pcie_ref_ck>, + <&dpll_pcie_ref_m2ldo_ck>, + <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 8>, + <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>, + <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>, + <&optfclk_pciephy_div>, + <&sys_clkin1>; + clock-names = "dpll_ref", "dpll_ref_m2", + "wkupclk", "refclk", + "div-clk", "phy-div", "sysclk"; + #phy-cells = <0>; + status = "disabled"; + }; + + sata_phy: phy@6000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x6000 0x80>, /* phy_rx */ + <0x6400 0x64>, /* phy_tx */ + <0x6800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + syscon-phy-power = <&scm_conf 0x374>; + clocks = <&sys_clkin1>, + <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>; + clock-names = "sysclk", "refclk"; + syscon-pllreset = <&scm_conf 0x3fc>; + #phy-cells = <0>; + }; + }; + }; + + target-module@a0000 { /* 0x4a0a0000, ap 15 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa0000 0x8000>; + }; + + target-module@d9000 { /* 0x4a0d9000, ap 17 72.0 */ + compatible = "ti,sysc-omap4-sr", "ti,sysc"; + ti,hwmods = "smartreflex_mpu"; + reg = <0xd9038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): coreaon_pwrdm, coreaon_clkdm */ + clocks = <&coreaon_clkctrl DRA7_COREAON_SMARTREFLEX_MPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd9000 0x1000>; + + /* SmartReflex child device marked reserved in TRM */ + }; + + target-module@dd000 { /* 0x4a0dd000, ap 19 18.0 */ + compatible = "ti,sysc-omap4-sr", "ti,sysc"; + ti,hwmods = "smartreflex_core"; + reg = <0xdd038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): coreaon_pwrdm, coreaon_clkdm */ + clocks = <&coreaon_clkctrl DRA7_COREAON_SMARTREFLEX_CORE_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xdd000 0x1000>; + + /* SmartReflex child device marked reserved in TRM */ + }; + + target-module@e0000 { /* 0x4a0e0000, ap 21 28.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe0000 0x1000>; + }; + + target-module@f4000 { /* 0x4a0f4000, ap 23 04.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox1"; + reg = <0xf4000 0x4>, + <0xf4010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf4000 0x1000>; + + mailbox1: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + status = "disabled"; + }; + }; + + target-module@f6000 { /* 0x4a0f6000, ap 25 78.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spinlock"; + reg = <0xf6000 0x4>, + <0xf6010 0x4>, + <0xf6014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_SPINLOCK_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf6000 0x1000>; + + hwspinlock: spinlock@0 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x0 0x1000>; + #hwlock-cells = <1>; + }; + }; + }; + + segment@100000 { /* 0x4a100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00002000 0x00102000 0x001000>, /* ap 27 */ + <0x00003000 0x00103000 0x001000>, /* ap 28 */ + <0x00008000 0x00108000 0x001000>, /* ap 29 */ + <0x00009000 0x00109000 0x001000>, /* ap 30 */ + <0x00040000 0x00140000 0x010000>, /* ap 31 */ + <0x00050000 0x00150000 0x001000>, /* ap 32 */ + <0x00051000 0x00151000 0x001000>, /* ap 33 */ + <0x00052000 0x00152000 0x001000>, /* ap 34 */ + <0x00053000 0x00153000 0x001000>, /* ap 35 */ + <0x00054000 0x00154000 0x001000>, /* ap 36 */ + <0x00055000 0x00155000 0x001000>, /* ap 37 */ + <0x00056000 0x00156000 0x001000>, /* ap 38 */ + <0x00057000 0x00157000 0x001000>, /* ap 39 */ + <0x00058000 0x00158000 0x001000>, /* ap 40 */ + <0x0005b000 0x0015b000 0x001000>, /* ap 41 */ + <0x0005c000 0x0015c000 0x001000>, /* ap 42 */ + <0x0005d000 0x0015d000 0x001000>, /* ap 45 */ + <0x0005e000 0x0015e000 0x001000>, /* ap 46 */ + <0x0005f000 0x0015f000 0x001000>, /* ap 47 */ + <0x00060000 0x00160000 0x001000>, /* ap 48 */ + <0x00061000 0x00161000 0x001000>, /* ap 49 */ + <0x00062000 0x00162000 0x001000>, /* ap 50 */ + <0x00063000 0x00163000 0x001000>, /* ap 51 */ + <0x00064000 0x00164000 0x001000>, /* ap 52 */ + <0x00065000 0x00165000 0x001000>, /* ap 53 */ + <0x00066000 0x00166000 0x001000>, /* ap 54 */ + <0x00067000 0x00167000 0x001000>, /* ap 55 */ + <0x00068000 0x00168000 0x001000>, /* ap 56 */ + <0x0006d000 0x0016d000 0x001000>, /* ap 57 */ + <0x0006e000 0x0016e000 0x001000>, /* ap 58 */ + <0x00071000 0x00171000 0x001000>, /* ap 61 */ + <0x00072000 0x00172000 0x001000>, /* ap 62 */ + <0x00073000 0x00173000 0x001000>, /* ap 63 */ + <0x00074000 0x00174000 0x001000>, /* ap 64 */ + <0x00075000 0x00175000 0x001000>, /* ap 65 */ + <0x00076000 0x00176000 0x001000>, /* ap 66 */ + <0x00077000 0x00177000 0x001000>, /* ap 67 */ + <0x00078000 0x00178000 0x001000>, /* ap 68 */ + <0x00081000 0x00181000 0x001000>, /* ap 69 */ + <0x00082000 0x00182000 0x001000>, /* ap 70 */ + <0x00083000 0x00183000 0x001000>, /* ap 71 */ + <0x00084000 0x00184000 0x001000>, /* ap 72 */ + <0x00085000 0x00185000 0x001000>, /* ap 73 */ + <0x00086000 0x00186000 0x001000>, /* ap 74 */ + <0x00087000 0x00187000 0x001000>, /* ap 75 */ + <0x00088000 0x00188000 0x001000>, /* ap 76 */ + <0x00069000 0x00169000 0x001000>, /* ap 103 */ + <0x0006a000 0x0016a000 0x001000>, /* ap 104 */ + <0x00079000 0x00179000 0x001000>, /* ap 105 */ + <0x0007a000 0x0017a000 0x001000>, /* ap 106 */ + <0x0006b000 0x0016b000 0x001000>, /* ap 107 */ + <0x0006c000 0x0016c000 0x001000>, /* ap 108 */ + <0x0007b000 0x0017b000 0x001000>, /* ap 121 */ + <0x0007c000 0x0017c000 0x001000>, /* ap 122 */ + <0x0007d000 0x0017d000 0x001000>, /* ap 123 */ + <0x0007e000 0x0017e000 0x001000>, /* ap 124 */ + <0x00059000 0x00159000 0x001000>, /* ap 125 */ + <0x0005a000 0x0015a000 0x001000>; /* ap 126 */ + + target-module@2000 { /* 0x4a102000, ap 27 3c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@8000 { /* 0x4a108000, ap 29 1e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + }; + + target-module@40000 { /* 0x4a140000, ap 31 06.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x10000>; + }; + + target-module@51000 { /* 0x4a151000, ap 33 50.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x51000 0x1000>; + }; + + target-module@53000 { /* 0x4a153000, ap 35 54.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x53000 0x1000>; + }; + + target-module@55000 { /* 0x4a155000, ap 37 46.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x55000 0x1000>; + }; + + target-module@57000 { /* 0x4a157000, ap 39 58.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x57000 0x1000>; + }; + + target-module@59000 { /* 0x4a159000, ap 125 6a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000 0x1000>; + }; + + target-module@5b000 { /* 0x4a15b000, ap 41 60.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + }; + + target-module@5d000 { /* 0x4a15d000, ap 45 3a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + }; + + target-module@5f000 { /* 0x4a15f000, ap 47 56.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5f000 0x1000>; + }; + + target-module@61000 { /* 0x4a161000, ap 49 32.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x61000 0x1000>; + }; + + target-module@63000 { /* 0x4a163000, ap 51 5c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x63000 0x1000>; + }; + + target-module@65000 { /* 0x4a165000, ap 53 4e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x65000 0x1000>; + }; + + target-module@67000 { /* 0x4a167000, ap 55 5e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x67000 0x1000>; + }; + + target-module@69000 { /* 0x4a169000, ap 103 4a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x69000 0x1000>; + }; + + target-module@6b000 { /* 0x4a16b000, ap 107 52.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6b000 0x1000>; + }; + + target-module@6d000 { /* 0x4a16d000, ap 57 68.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6d000 0x1000>; + }; + + target-module@71000 { /* 0x4a171000, ap 61 48.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x71000 0x1000>; + }; + + target-module@73000 { /* 0x4a173000, ap 63 2a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x73000 0x1000>; + }; + + target-module@75000 { /* 0x4a175000, ap 65 64.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x75000 0x1000>; + }; + + target-module@77000 { /* 0x4a177000, ap 67 66.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x77000 0x1000>; + }; + + target-module@79000 { /* 0x4a179000, ap 105 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x79000 0x1000>; + }; + + target-module@7b000 { /* 0x4a17b000, ap 121 7c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7b000 0x1000>; + }; + + target-module@7d000 { /* 0x4a17d000, ap 123 7e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7d000 0x1000>; + }; + + target-module@81000 { /* 0x4a181000, ap 69 26.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x81000 0x1000>; + }; + + target-module@83000 { /* 0x4a183000, ap 71 2e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x83000 0x1000>; + }; + + target-module@85000 { /* 0x4a185000, ap 73 36.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x85000 0x1000>; + }; + + target-module@87000 { /* 0x4a187000, ap 75 74.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x87000 0x1000>; + }; + }; + + segment@200000 { /* 0x4a200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00018000 0x00218000 0x001000>, /* ap 43 */ + <0x00019000 0x00219000 0x001000>, /* ap 44 */ + <0x00000000 0x00200000 0x001000>, /* ap 77 */ + <0x00001000 0x00201000 0x001000>, /* ap 78 */ + <0x0000a000 0x0020a000 0x001000>, /* ap 79 */ + <0x0000b000 0x0020b000 0x001000>, /* ap 80 */ + <0x0000c000 0x0020c000 0x001000>, /* ap 81 */ + <0x0000d000 0x0020d000 0x001000>, /* ap 82 */ + <0x0000e000 0x0020e000 0x001000>, /* ap 83 */ + <0x0000f000 0x0020f000 0x001000>, /* ap 84 */ + <0x00010000 0x00210000 0x001000>, /* ap 85 */ + <0x00011000 0x00211000 0x001000>, /* ap 86 */ + <0x00012000 0x00212000 0x001000>, /* ap 87 */ + <0x00013000 0x00213000 0x001000>, /* ap 88 */ + <0x00014000 0x00214000 0x001000>, /* ap 89 */ + <0x00015000 0x00215000 0x001000>, /* ap 90 */ + <0x0002a000 0x0022a000 0x001000>, /* ap 91 */ + <0x0002b000 0x0022b000 0x001000>, /* ap 92 */ + <0x0001c000 0x0021c000 0x001000>, /* ap 93 */ + <0x0001d000 0x0021d000 0x001000>, /* ap 94 */ + <0x0001e000 0x0021e000 0x001000>, /* ap 95 */ + <0x0001f000 0x0021f000 0x001000>, /* ap 96 */ + <0x00020000 0x00220000 0x001000>, /* ap 97 */ + <0x00021000 0x00221000 0x001000>, /* ap 98 */ + <0x00024000 0x00224000 0x001000>, /* ap 99 */ + <0x00025000 0x00225000 0x001000>, /* ap 100 */ + <0x00026000 0x00226000 0x001000>, /* ap 101 */ + <0x00027000 0x00227000 0x001000>, /* ap 102 */ + <0x0002c000 0x0022c000 0x001000>, /* ap 109 */ + <0x0002d000 0x0022d000 0x001000>, /* ap 110 */ + <0x0002e000 0x0022e000 0x001000>, /* ap 111 */ + <0x0002f000 0x0022f000 0x001000>, /* ap 112 */ + <0x00030000 0x00230000 0x001000>, /* ap 113 */ + <0x00031000 0x00231000 0x001000>, /* ap 114 */ + <0x00032000 0x00232000 0x001000>, /* ap 115 */ + <0x00033000 0x00233000 0x001000>, /* ap 116 */ + <0x00034000 0x00234000 0x001000>, /* ap 117 */ + <0x00035000 0x00235000 0x001000>, /* ap 118 */ + <0x00036000 0x00236000 0x001000>, /* ap 119 */ + <0x00037000 0x00237000 0x001000>, /* ap 120 */ + <0x0001a000 0x0021a000 0x001000>, /* ap 127 */ + <0x0001b000 0x0021b000 0x001000>; /* ap 128 */ + + target-module@0 { /* 0x4a200000, ap 77 3e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + }; + + target-module@a000 { /* 0x4a20a000, ap 79 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + }; + + target-module@c000 { /* 0x4a20c000, ap 81 0c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + }; + + target-module@e000 { /* 0x4a20e000, ap 83 22.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe000 0x1000>; + }; + + target-module@10000 { /* 0x4a210000, ap 85 14.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x1000>; + }; + + target-module@12000 { /* 0x4a212000, ap 87 16.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x12000 0x1000>; + }; + + target-module@14000 { /* 0x4a214000, ap 89 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x14000 0x1000>; + }; + + target-module@18000 { /* 0x4a218000, ap 43 12.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000 0x1000>; + }; + + target-module@1a000 { /* 0x4a21a000, ap 127 7a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1a000 0x1000>; + }; + + target-module@1c000 { /* 0x4a21c000, ap 93 38.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1c000 0x1000>; + }; + + target-module@1e000 { /* 0x4a21e000, ap 95 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e000 0x1000>; + }; + + target-module@20000 { /* 0x4a220000, ap 97 24.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + }; + + target-module@24000 { /* 0x4a224000, ap 99 44.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + }; + + target-module@26000 { /* 0x4a226000, ap 101 2c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>; + }; + + target-module@2a000 { /* 0x4a22a000, ap 91 4c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>; + }; + + target-module@2c000 { /* 0x4a22c000, ap 109 6c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2c000 0x1000>; + }; + + target-module@2e000 { /* 0x4a22e000, ap 111 6e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2e000 0x1000>; + }; + + target-module@30000 { /* 0x4a230000, ap 113 70.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x30000 0x1000>; + }; + + target-module@32000 { /* 0x4a232000, ap 115 5a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>; + }; + + target-module@34000 { /* 0x4a234000, ap 117 76.1 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x34000 0x1000>; + }; + + target-module@36000 { /* 0x4a236000, ap 119 62.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + }; + }; +}; + +&l4_per1 { /* 0x48000000 */ + compatible = "ti,dra7-l4-per1", "simple-bus"; + reg = <0x48000000 0x800>, + <0x48000800 0x800>, + <0x48001000 0x400>, + <0x48001400 0x400>, + <0x48001800 0x400>, + <0x48001c00 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x48000000 0x200000>, /* segment 0 */ + <0x00200000 0x48200000 0x200000>; /* segment 1 */ + + segment@0 { /* 0x48000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x000400>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00020000 0x00020000 0x001000>, /* ap 3 */ + <0x00021000 0x00021000 0x001000>, /* ap 4 */ + <0x00032000 0x00032000 0x001000>, /* ap 5 */ + <0x00033000 0x00033000 0x001000>, /* ap 6 */ + <0x00034000 0x00034000 0x001000>, /* ap 7 */ + <0x00035000 0x00035000 0x001000>, /* ap 8 */ + <0x00036000 0x00036000 0x001000>, /* ap 9 */ + <0x00037000 0x00037000 0x001000>, /* ap 10 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 11 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 12 */ + <0x00055000 0x00055000 0x001000>, /* ap 13 */ + <0x00056000 0x00056000 0x001000>, /* ap 14 */ + <0x00057000 0x00057000 0x001000>, /* ap 15 */ + <0x00058000 0x00058000 0x001000>, /* ap 16 */ + <0x00059000 0x00059000 0x001000>, /* ap 17 */ + <0x0005a000 0x0005a000 0x001000>, /* ap 18 */ + <0x0005b000 0x0005b000 0x001000>, /* ap 19 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 20 */ + <0x0005d000 0x0005d000 0x001000>, /* ap 21 */ + <0x0005e000 0x0005e000 0x001000>, /* ap 22 */ + <0x00060000 0x00060000 0x001000>, /* ap 23 */ + <0x0006a000 0x0006a000 0x001000>, /* ap 24 */ + <0x0006b000 0x0006b000 0x001000>, /* ap 25 */ + <0x0006c000 0x0006c000 0x001000>, /* ap 26 */ + <0x0006d000 0x0006d000 0x001000>, /* ap 27 */ + <0x0006e000 0x0006e000 0x001000>, /* ap 28 */ + <0x0006f000 0x0006f000 0x001000>, /* ap 29 */ + <0x00070000 0x00070000 0x001000>, /* ap 30 */ + <0x00071000 0x00071000 0x001000>, /* ap 31 */ + <0x00072000 0x00072000 0x001000>, /* ap 32 */ + <0x00073000 0x00073000 0x001000>, /* ap 33 */ + <0x00061000 0x00061000 0x001000>, /* ap 34 */ + <0x00053000 0x00053000 0x001000>, /* ap 35 */ + <0x00054000 0x00054000 0x001000>, /* ap 36 */ + <0x000b2000 0x000b2000 0x001000>, /* ap 37 */ + <0x000b3000 0x000b3000 0x001000>, /* ap 38 */ + <0x00078000 0x00078000 0x001000>, /* ap 39 */ + <0x00079000 0x00079000 0x001000>, /* ap 40 */ + <0x00086000 0x00086000 0x001000>, /* ap 41 */ + <0x00087000 0x00087000 0x001000>, /* ap 42 */ + <0x00088000 0x00088000 0x001000>, /* ap 43 */ + <0x00089000 0x00089000 0x001000>, /* ap 44 */ + <0x00051000 0x00051000 0x001000>, /* ap 45 */ + <0x00052000 0x00052000 0x001000>, /* ap 46 */ + <0x00098000 0x00098000 0x001000>, /* ap 47 */ + <0x00099000 0x00099000 0x001000>, /* ap 48 */ + <0x0009a000 0x0009a000 0x001000>, /* ap 49 */ + <0x0009b000 0x0009b000 0x001000>, /* ap 50 */ + <0x0009c000 0x0009c000 0x001000>, /* ap 51 */ + <0x0009d000 0x0009d000 0x001000>, /* ap 52 */ + <0x00068000 0x00068000 0x001000>, /* ap 53 */ + <0x00069000 0x00069000 0x001000>, /* ap 54 */ + <0x00090000 0x00090000 0x002000>, /* ap 55 */ + <0x00092000 0x00092000 0x001000>, /* ap 56 */ + <0x000a4000 0x000a4000 0x001000>, /* ap 57 */ + <0x000a6000 0x000a6000 0x001000>, /* ap 58 */ + <0x000a8000 0x000a8000 0x004000>, /* ap 59 */ + <0x000ac000 0x000ac000 0x001000>, /* ap 60 */ + <0x000ad000 0x000ad000 0x001000>, /* ap 61 */ + <0x000ae000 0x000ae000 0x001000>, /* ap 62 */ + <0x00066000 0x00066000 0x001000>, /* ap 63 */ + <0x00067000 0x00067000 0x001000>, /* ap 64 */ + <0x000b4000 0x000b4000 0x001000>, /* ap 65 */ + <0x000b5000 0x000b5000 0x001000>, /* ap 66 */ + <0x000b8000 0x000b8000 0x001000>, /* ap 67 */ + <0x000b9000 0x000b9000 0x001000>, /* ap 68 */ + <0x000ba000 0x000ba000 0x001000>, /* ap 69 */ + <0x000bb000 0x000bb000 0x001000>, /* ap 70 */ + <0x000d1000 0x000d1000 0x001000>, /* ap 71 */ + <0x000d2000 0x000d2000 0x001000>, /* ap 72 */ + <0x000d5000 0x000d5000 0x001000>, /* ap 73 */ + <0x000d6000 0x000d6000 0x001000>, /* ap 74 */ + <0x000a2000 0x000a2000 0x001000>, /* ap 75 */ + <0x000a3000 0x000a3000 0x001000>, /* ap 76 */ + <0x00001400 0x00001400 0x000400>, /* ap 77 */ + <0x00001800 0x00001800 0x000400>, /* ap 78 */ + <0x00001c00 0x00001c00 0x000400>, /* ap 79 */ + <0x000a5000 0x000a5000 0x001000>, /* ap 80 */ + <0x0007a000 0x0007a000 0x001000>, /* ap 81 */ + <0x0007b000 0x0007b000 0x001000>, /* ap 82 */ + <0x0007c000 0x0007c000 0x001000>, /* ap 83 */ + <0x0007d000 0x0007d000 0x001000>; /* ap 84 */ + + target-module@20000 { /* 0x48020000, ap 3 04.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart3"; + reg = <0x20050 0x4>, + <0x20054 0x4>, + <0x20058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_UART3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + + uart3: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + dmas = <&sdma_xbar 53>, <&sdma_xbar 54>; + dma-names = "tx", "rx"; + }; + }; + + target-module@32000 { /* 0x48032000, ap 5 3e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer2"; + reg = <0x32000 0x4>, + <0x32010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>; + + timer2: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@34000 { /* 0x48034000, ap 7 46.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer3"; + reg = <0x34000 0x4>, + <0x34010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x34000 0x1000>; + + timer3: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@36000 { /* 0x48036000, ap 9 4e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer4"; + reg = <0x36000 0x4>, + <0x36010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + + timer4: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@3e000 { /* 0x4803e000, ap 11 56.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer9"; + reg = <0x3e000 0x4>, + <0x3e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + + timer9: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@51000 { /* 0x48051000, ap 45 2e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio7"; + reg = <0x51000 0x4>, + <0x51010 0x4>, + <0x51114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_GPIO7_CLKCTRL 0>, + <&l4per_clkctrl DRA7_L4PER_GPIO7_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x51000 0x1000>; + + gpio7: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@53000 { /* 0x48053000, ap 35 36.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio8"; + reg = <0x53000 0x4>, + <0x53010 0x4>, + <0x53114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_GPIO8_CLKCTRL 0>, + <&l4per_clkctrl DRA7_L4PER_GPIO8_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x53000 0x1000>; + + gpio8: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@55000 { /* 0x48055000, ap 13 0e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio2"; + reg = <0x55000 0x4>, + <0x55010 0x4>, + <0x55114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_GPIO2_CLKCTRL 0>, + <&l4per_clkctrl DRA7_L4PER_GPIO2_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x55000 0x1000>; + + gpio2: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@57000 { /* 0x48057000, ap 15 06.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio3"; + reg = <0x57000 0x4>, + <0x57010 0x4>, + <0x57114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_GPIO3_CLKCTRL 0>, + <&l4per_clkctrl DRA7_L4PER_GPIO3_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x57000 0x1000>; + + gpio3: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@59000 { /* 0x48059000, ap 17 16.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio4"; + reg = <0x59000 0x4>, + <0x59010 0x4>, + <0x59114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_GPIO4_CLKCTRL 0>, + <&l4per_clkctrl DRA7_L4PER_GPIO4_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000 0x1000>; + + gpio4: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@5b000 { /* 0x4805b000, ap 19 1e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio5"; + reg = <0x5b000 0x4>, + <0x5b010 0x4>, + <0x5b114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_GPIO5_CLKCTRL 0>, + <&l4per_clkctrl DRA7_L4PER_GPIO5_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + + gpio5: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@5d000 { /* 0x4805d000, ap 21 26.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio6"; + reg = <0x5d000 0x4>, + <0x5d010 0x4>, + <0x5d114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_GPIO6_CLKCTRL 0>, + <&l4per_clkctrl DRA7_L4PER_GPIO6_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + + gpio6: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@60000 { /* 0x48060000, ap 23 32.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c3"; + reg = <0x60000 0x8>, + <0x60010 0x8>, + <0x60090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_I2C3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + + i2c3: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@66000 { /* 0x48066000, ap 63 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart5"; + reg = <0x66050 0x4>, + <0x66054 0x4>, + <0x66058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_UART5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x66000 0x1000>; + + uart5: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + dmas = <&sdma_xbar 63>, <&sdma_xbar 64>; + dma-names = "tx", "rx"; + }; + }; + + target-module@68000 { /* 0x48068000, ap 53 1c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart6"; + reg = <0x68050 0x4>, + <0x68054 0x4>, + <0x68058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ + clocks = <&ipu_clkctrl DRA7_IPU_UART6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x68000 0x1000>; + + uart6: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + dmas = <&sdma_xbar 79>, <&sdma_xbar 80>; + dma-names = "tx", "rx"; + }; + }; + + target-module@6a000 { /* 0x4806a000, ap 24 24.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart1"; + reg = <0x6a050 0x4>, + <0x6a054 0x4>, + <0x6a058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_UART1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6a000 0x1000>; + + uart1: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + dmas = <&sdma_xbar 49>, <&sdma_xbar 50>; + dma-names = "tx", "rx"; + }; + }; + + target-module@6c000 { /* 0x4806c000, ap 26 2c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart2"; + reg = <0x6c050 0x4>, + <0x6c054 0x4>, + <0x6c058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_UART2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6c000 0x1000>; + + uart2: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + dmas = <&sdma_xbar 51>, <&sdma_xbar 52>; + dma-names = "tx", "rx"; + }; + }; + + target-module@6e000 { /* 0x4806e000, ap 28 0c.1 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart4"; + reg = <0x6e050 0x4>, + <0x6e054 0x4>, + <0x6e058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_UART4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6e000 0x1000>; + + uart4: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + dmas = <&sdma_xbar 55>, <&sdma_xbar 56>; + dma-names = "tx", "rx"; + }; + }; + + target-module@70000 { /* 0x48070000, ap 30 22.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c1"; + reg = <0x70000 0x8>, + <0x70010 0x8>, + <0x70090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_I2C1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x70000 0x1000>; + + i2c1: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@72000 { /* 0x48072000, ap 32 2a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c2"; + reg = <0x72000 0x8>, + <0x72010 0x8>, + <0x72090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_I2C2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x72000 0x1000>; + + i2c2: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@78000 { /* 0x48078000, ap 39 0a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "elm"; + reg = <0x78000 0x4>, + <0x78010 0x4>, + <0x78014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_ELM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x78000 0x1000>; + + elm: elm@0 { + compatible = "ti,am3352-elm"; + reg = <0x0 0xfc0>; /* device IO registers */ + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@7a000 { /* 0x4807a000, ap 81 3a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c4"; + reg = <0x7a000 0x8>, + <0x7a010 0x8>, + <0x7a090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_I2C4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7a000 0x1000>; + + i2c4: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@7c000 { /* 0x4807c000, ap 83 4a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c5"; + reg = <0x7c000 0x8>, + <0x7c010 0x8>, + <0x7c090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ + clocks = <&ipu_clkctrl DRA7_IPU_I2C5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7c000 0x1000>; + + i2c5: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@86000 { /* 0x48086000, ap 41 5e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer10"; + reg = <0x86000 0x4>, + <0x86010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x86000 0x1000>; + + timer10: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@88000 { /* 0x48088000, ap 43 66.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer11"; + reg = <0x88000 0x4>, + <0x88010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x88000 0x1000>; + + timer11: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@90000 { /* 0x48090000, ap 55 12.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "rng"; + reg = <0x91fe0 0x4>, + <0x91fe4 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl DRA7_L4SEC_RNG_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x90000 0x2000>; + + rng: rng@0 { + compatible = "ti,omap4-rng"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + }; + + target-module@98000 { /* 0x48098000, ap 47 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi1"; + reg = <0x98000 0x4>, + <0x98010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x98000 0x1000>; + + mcspi1: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <4>; + dmas = <&sdma_xbar 35>, + <&sdma_xbar 36>, + <&sdma_xbar 37>, + <&sdma_xbar 38>, + <&sdma_xbar 39>, + <&sdma_xbar 40>, + <&sdma_xbar 41>, + <&sdma_xbar 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + status = "disabled"; + }; + }; + + target-module@9a000 { /* 0x4809a000, ap 49 10.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi2"; + reg = <0x9a000 0x4>, + <0x9a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9a000 0x1000>; + + mcspi2: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <2>; + dmas = <&sdma_xbar 43>, + <&sdma_xbar 44>, + <&sdma_xbar 45>, + <&sdma_xbar 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + status = "disabled"; + }; + }; + + target-module@9c000 { /* 0x4809c000, ap 51 38.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc1"; + reg = <0x9c000 0x4>, + <0x9c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl DRA7_L3INIT_MMC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9c000 0x1000>; + + mmc1: mmc@0 { + compatible = "ti,dra7-sdhci"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + pbias-supply = <&pbias_mmc_reg>; + max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-ddr-3_3v; + }; + }; + + target-module@a2000 { /* 0x480a2000, ap 75 02.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa2000 0x1000>; + }; + + target-module@a4000 { /* 0x480a4000, ap 57 42.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x000a4000 0x00001000>, + <0x00001000 0x000a5000 0x00001000>; + }; + + target-module@a8000 { /* 0x480a8000, ap 59 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa8000 0x4000>; + }; + + target-module@ad000 { /* 0x480ad000, ap 61 20.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc3"; + reg = <0xad000 0x4>, + <0xad010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_MMC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xad000 0x1000>; + + mmc3: mmc@0 { + compatible = "ti,dra7-sdhci"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + /* Errata i887 limits max-frequency of MMC3 to 64 MHz */ + max-frequency = <64000000>; + /* SDMA is not supported */ + sdhci-caps-mask = <0x0 0x400000>; + }; + }; + + target-module@b2000 { /* 0x480b2000, ap 37 52.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "hdq1w"; + reg = <0xb2000 0x4>, + <0xb2014 0x4>, + <0xb2018 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + ti,no-reset-on-init; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_HDQ1W_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb2000 0x1000>; + + hdqw1w: 1w@0 { + compatible = "ti,omap3-1w"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@b4000 { /* 0x480b4000, ap 65 40.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc2"; + reg = <0xb4000 0x4>, + <0xb4010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl DRA7_L3INIT_MMC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb4000 0x1000>; + + mmc2: mmc@0 { + compatible = "ti,dra7-sdhci"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + max-frequency = <192000000>; + /* SDR104/DDR50/SDR50 bits in CAPA2 is not supported */ + sdhci-caps-mask = <0x7 0x0>; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + mmc-ddr-3_3v; + }; + }; + + target-module@b8000 { /* 0x480b8000, ap 67 48.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi3"; + reg = <0xb8000 0x4>, + <0xb8010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb8000 0x1000>; + + mcspi3: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <2>; + dmas = <&sdma_xbar 15>, <&sdma_xbar 16>; + dma-names = "tx0", "rx0"; + status = "disabled"; + }; + }; + + target-module@ba000 { /* 0x480ba000, ap 69 18.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi4"; + reg = <0xba000 0x4>, + <0xba010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xba000 0x1000>; + + mcspi4: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <1>; + dmas = <&sdma_xbar 70>, <&sdma_xbar 71>; + dma-names = "tx0", "rx0"; + status = "disabled"; + }; + }; + + target-module@d1000 { /* 0x480d1000, ap 71 28.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc4"; + reg = <0xd1000 0x4>, + <0xd1010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_MMC4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd1000 0x1000>; + + mmc4: mmc@0 { + compatible = "ti,dra7-sdhci"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + max-frequency = <192000000>; + /* SDMA is not supported */ + sdhci-caps-mask = <0x0 0x400000>; + }; + }; + + target-module@d5000 { /* 0x480d5000, ap 73 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd5000 0x1000>; + }; + }; + + segment@200000 { /* 0x48200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&l4_per2 { /* 0x48400000 */ + compatible = "ti,dra7-l4-per2", "simple-bus"; + reg = <0x48400000 0x800>, + <0x48400800 0x800>, + <0x48401000 0x400>, + <0x48401400 0x400>, + <0x48401800 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x48400000 0x400000>, /* segment 0 */ + <0x45800000 0x45800000 0x400000>, /* L3 data port */ + <0x45c00000 0x45c00000 0x400000>, /* L3 data port */ + <0x46000000 0x46000000 0x400000>, /* L3 data port */ + <0x48436000 0x48436000 0x400000>, /* L3 data port */ + <0x4843a000 0x4843a000 0x400000>, /* L3 data port */ + <0x4844c000 0x4844c000 0x400000>, /* L3 data port */ + <0x48450000 0x48450000 0x400000>, /* L3 data port */ + <0x48454000 0x48454000 0x400000>; /* L3 data port */ + + segment@0 { /* 0x48400000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x000400>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00084000 0x00084000 0x004000>, /* ap 3 */ + <0x00001400 0x00001400 0x000400>, /* ap 4 */ + <0x00001800 0x00001800 0x000400>, /* ap 5 */ + <0x00088000 0x00088000 0x001000>, /* ap 6 */ + <0x0002c000 0x0002c000 0x001000>, /* ap 7 */ + <0x0002d000 0x0002d000 0x001000>, /* ap 8 */ + <0x00060000 0x00060000 0x002000>, /* ap 9 */ + <0x00062000 0x00062000 0x001000>, /* ap 10 */ + <0x00064000 0x00064000 0x002000>, /* ap 11 */ + <0x00066000 0x00066000 0x001000>, /* ap 12 */ + <0x00068000 0x00068000 0x002000>, /* ap 13 */ + <0x0006a000 0x0006a000 0x001000>, /* ap 14 */ + <0x0006c000 0x0006c000 0x002000>, /* ap 15 */ + <0x0006e000 0x0006e000 0x001000>, /* ap 16 */ + <0x00036000 0x00036000 0x001000>, /* ap 17 */ + <0x00037000 0x00037000 0x001000>, /* ap 18 */ + <0x00070000 0x00070000 0x002000>, /* ap 19 */ + <0x00072000 0x00072000 0x001000>, /* ap 20 */ + <0x0003a000 0x0003a000 0x001000>, /* ap 21 */ + <0x0003b000 0x0003b000 0x001000>, /* ap 22 */ + <0x0003c000 0x0003c000 0x001000>, /* ap 23 */ + <0x0003d000 0x0003d000 0x001000>, /* ap 24 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 25 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 26 */ + <0x00040000 0x00040000 0x001000>, /* ap 27 */ + <0x00041000 0x00041000 0x001000>, /* ap 28 */ + <0x00042000 0x00042000 0x001000>, /* ap 29 */ + <0x00043000 0x00043000 0x001000>, /* ap 30 */ + <0x00080000 0x00080000 0x002000>, /* ap 31 */ + <0x00082000 0x00082000 0x001000>, /* ap 32 */ + <0x0004a000 0x0004a000 0x001000>, /* ap 33 */ + <0x0004b000 0x0004b000 0x001000>, /* ap 34 */ + <0x00074000 0x00074000 0x002000>, /* ap 35 */ + <0x00076000 0x00076000 0x001000>, /* ap 36 */ + <0x00050000 0x00050000 0x001000>, /* ap 37 */ + <0x00051000 0x00051000 0x001000>, /* ap 38 */ + <0x00078000 0x00078000 0x002000>, /* ap 39 */ + <0x0007a000 0x0007a000 0x001000>, /* ap 40 */ + <0x00054000 0x00054000 0x001000>, /* ap 41 */ + <0x00055000 0x00055000 0x001000>, /* ap 42 */ + <0x0007c000 0x0007c000 0x002000>, /* ap 43 */ + <0x0007e000 0x0007e000 0x001000>, /* ap 44 */ + <0x0004c000 0x0004c000 0x001000>, /* ap 45 */ + <0x0004d000 0x0004d000 0x001000>, /* ap 46 */ + <0x00020000 0x00020000 0x001000>, /* ap 47 */ + <0x00021000 0x00021000 0x001000>, /* ap 48 */ + <0x00022000 0x00022000 0x001000>, /* ap 49 */ + <0x00023000 0x00023000 0x001000>, /* ap 50 */ + <0x00024000 0x00024000 0x001000>, /* ap 51 */ + <0x00025000 0x00025000 0x001000>, /* ap 52 */ + <0x00046000 0x00046000 0x001000>, /* ap 53 */ + <0x00047000 0x00047000 0x001000>, /* ap 54 */ + <0x00048000 0x00048000 0x001000>, /* ap 55 */ + <0x00049000 0x00049000 0x001000>, /* ap 56 */ + <0x00058000 0x00058000 0x002000>, /* ap 57 */ + <0x0005a000 0x0005a000 0x001000>, /* ap 58 */ + <0x0005b000 0x0005b000 0x001000>, /* ap 59 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 60 */ + <0x0005d000 0x0005d000 0x001000>, /* ap 61 */ + <0x0005e000 0x0005e000 0x001000>, /* ap 62 */ + <0x45800000 0x45800000 0x400000>, /* L3 data port */ + <0x45c00000 0x45c00000 0x400000>, /* L3 data port */ + <0x46000000 0x46000000 0x400000>, /* L3 data port */ + <0x48436000 0x48436000 0x400000>, /* L3 data port */ + <0x4843a000 0x4843a000 0x400000>, /* L3 data port */ + <0x4844c000 0x4844c000 0x400000>, /* L3 data port */ + <0x48450000 0x48450000 0x400000>, /* L3 data port */ + <0x48454000 0x48454000 0x400000>; /* L3 data port */ + + target-module@20000 { /* 0x48420000, ap 47 02.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart7"; + reg = <0x20050 0x4>, + <0x20054 0x4>, + <0x20058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_UART7_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + + uart7: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + }; + }; + + target-module@22000 { /* 0x48422000, ap 49 0a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart8"; + reg = <0x22050 0x4>, + <0x22054 0x4>, + <0x22058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_UART8_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>; + + uart8: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + }; + }; + + target-module@24000 { /* 0x48424000, ap 51 12.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart9"; + reg = <0x24050 0x4>, + <0x24054 0x4>, + <0x24058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_UART9_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + uart9: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + }; + }; + + target-module@2c000 { /* 0x4842c000, ap 7 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2c000 0x1000>; + }; + + target-module@36000 { /* 0x48436000, ap 17 06.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + }; + + target-module@3a000 { /* 0x4843a000, ap 21 3e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3a000 0x1000>; + }; + + target-module@3c000 { /* 0x4843c000, ap 23 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x3c000 0x4>; + reg-names = "rev"; + clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3c000 0x1000>; + + atl: atl@0 { + compatible = "ti,dra7-atl"; + reg = <0x0 0x3ff>; + ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, + <&atl_clkin2_ck>, <&atl_clkin3_ck>; + clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; + clock-names = "fck"; + status = "disabled"; + }; + }; + + target-module@3e000 { /* 0x4843e000, ap 25 30.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss0"; + reg = <0x3e000 0x4>, + <0x3e004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + + epwmss0: epwmss@0 { + compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; + reg = <0x0 0x30>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0 0 0x1000>; + + ecap0: ecap@100 { + compatible = "ti,dra746-ecap", + "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x100 0x80>; + clocks = <&l4_root_clk_div>; + clock-names = "fck"; + status = "disabled"; + }; + + ehrpwm0: pwm@200 { + compatible = "ti,dra746-ehrpwm", + "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@40000 { /* 0x48440000, ap 27 38.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss1"; + reg = <0x40000 0x4>, + <0x40004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x1000>; + + epwmss1: epwmss@0 { + compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; + reg = <0x0 0x30>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0 0 0x1000>; + + ecap1: ecap@100 { + compatible = "ti,dra746-ecap", + "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x100 0x80>; + clocks = <&l4_root_clk_div>; + clock-names = "fck"; + status = "disabled"; + }; + + ehrpwm1: pwm@200 { + compatible = "ti,dra746-ehrpwm", + "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@42000 { /* 0x48442000, ap 29 20.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss2"; + reg = <0x42000 0x4>, + <0x42004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x42000 0x1000>; + + epwmss2: epwmss@0 { + compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; + reg = <0x0 0x30>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0 0 0x1000>; + + ecap2: ecap@100 { + compatible = "ti,dra746-ecap", + "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x100 0x80>; + clocks = <&l4_root_clk_div>; + clock-names = "fck"; + status = "disabled"; + }; + + ehrpwm2: pwm@200 { + compatible = "ti,dra746-ehrpwm", + "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@46000 { /* 0x48446000, ap 53 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x46000 0x1000>; + }; + + target-module@48000 { /* 0x48448000, ap 55 48.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x48000 0x1000>; + }; + + target-module@4a000 { /* 0x4844a000, ap 33 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4a000 0x1000>; + }; + + target-module@4c000 { /* 0x4844c000, ap 45 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4c000 0x1000>; + }; + + target-module@50000 { /* 0x48450000, ap 37 24.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x50000 0x1000>; + }; + + target-module@54000 { /* 0x48454000, ap 41 2c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x54000 0x1000>; + }; + + target-module@58000 { /* 0x48458000, ap 57 28.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x58000 0x2000>; + }; + + target-module@5b000 { /* 0x4845b000, ap 59 46.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + }; + + target-module@5d000 { /* 0x4845d000, ap 61 22.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + }; + + target-module@60000 { /* 0x48460000, ap 9 0e.0 */ + compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; + ti,hwmods = "mcasp1"; + reg = <0x60000 0x4>, + <0x60004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ + clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>, + <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, + <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x2000>, + <0x45800000 0x45800000 0x400000>; + + mcasp1: mcasp@0 { + compatible = "ti,dra7-mcasp-audio"; + reg = <0x0 0x2000>, + <0x45800000 0x1000>; /* L3 data port */ + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>; + dma-names = "tx", "rx"; + clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 22>, + <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, + <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + status = "disabled"; + }; + }; + + target-module@64000 { /* 0x48464000, ap 11 1e.0 */ + compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; + ti,hwmods = "mcasp2"; + reg = <0x64000 0x4>, + <0x64004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x64000 0x2000>, + <0x45c00000 0x45c00000 0x400000>; + + mcasp2: mcasp@0 { + compatible = "ti,dra7-mcasp-audio"; + reg = <0x0 0x2000>, + <0x45c00000 0x1000>; /* L3 data port */ + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>; + dma-names = "tx", "rx"; + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 22>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + status = "disabled"; + }; + }; + + target-module@68000 { /* 0x48468000, ap 13 26.0 */ + compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; + ti,hwmods = "mcasp3"; + reg = <0x68000 0x4>, + <0x68004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x68000 0x2000>, + <0x46000000 0x46000000 0x400000>; + + mcasp3: mcasp@0 { + compatible = "ti,dra7-mcasp-audio"; + reg = <0x0 0x2000>, + <0x46000000 0x1000>; /* L3 data port */ + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>; + dma-names = "tx", "rx"; + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 22>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + }; + + target-module@6c000 { /* 0x4846c000, ap 15 2e.0 */ + compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; + ti,hwmods = "mcasp4"; + reg = <0x6c000 0x4>, + <0x6c004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6c000 0x2000>, + <0x48436000 0x48436000 0x400000>; + + mcasp4: mcasp@0 { + compatible = "ti,dra7-mcasp-audio"; + reg = <0x0 0x2000>, + <0x48436000 0x1000>; /* L3 data port */ + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>; + dma-names = "tx", "rx"; + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 22>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + }; + + target-module@70000 { /* 0x48470000, ap 19 36.0 */ + compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; + ti,hwmods = "mcasp5"; + reg = <0x70000 0x4>, + <0x70004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x70000 0x2000>, + <0x4843a000 0x4843a000 0x400000>; + + mcasp5: mcasp@0 { + compatible = "ti,dra7-mcasp-audio"; + reg = <0x0 0x2000>, + <0x4843a000 0x1000>; /* L3 data port */ + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>; + dma-names = "tx", "rx"; + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 22>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + }; + + target-module@74000 { /* 0x48474000, ap 35 14.0 */ + compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; + ti,hwmods = "mcasp6"; + reg = <0x74000 0x4>, + <0x74004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x74000 0x2000>, + <0x4844c000 0x4844c000 0x400000>; + + mcasp6: mcasp@0 { + compatible = "ti,dra7-mcasp-audio"; + reg = <0x0 0x2000>, + <0x4844c000 0x1000>; /* L3 data port */ + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>; + dma-names = "tx", "rx"; + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 22>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + }; + + target-module@78000 { /* 0x48478000, ap 39 0c.0 */ + compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; + ti,hwmods = "mcasp7"; + reg = <0x78000 0x4>, + <0x78004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x78000 0x2000>, + <0x48450000 0x48450000 0x400000>; + + mcasp7: mcasp@0 { + compatible = "ti,dra7-mcasp-audio"; + reg = <0x0 0x2000>, + <0x48450000 0x1000>; /* L3 data port */ + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>; + dma-names = "tx", "rx"; + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 22>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + }; + + target-module@7c000 { /* 0x4847c000, ap 43 04.0 */ + compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; + ti,hwmods = "mcasp8"; + reg = <0x7c000 0x4>, + <0x7c004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7c000 0x2000>, + <0x48454000 0x48454000 0x400000>; + + mcasp8: mcasp@0 { + compatible = "ti,dra7-mcasp-audio"; + reg = <0x0 0x2000>, + <0x48454000 0x1000>; /* L3 data port */ + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>; + dma-names = "tx", "rx"; + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 22>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + }; + + target-module@80000 { /* 0x48480000, ap 31 16.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x80000 0x4>; + reg-names = "rev"; + clocks = <&l4per2_clkctrl DRA7_L4PER2_DCAN2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x2000>; + + dcan2: can@0 { + compatible = "ti,dra7-d_can"; + reg = <0x0 0x2000>; + syscon-raminit = <&scm_conf 0x558 1>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_clkin1>; + status = "disabled"; + }; + }; + + target-module@84000 { /* 0x48484000, ap 3 10.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "gmac"; + reg = <0x85200 0x4>, + <0x85208 0x4>, + <0x85204 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <0>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,syss-mask = <1>; + clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x84000 0x4000>; + /* + * Do not allow gating of cpsw clock as workaround + * for errata i877. Keeping internal clock disabled + * causes the device switching characteristics + * to degrade over time and eventually fail to meet + * the data manual delay time/skew specs. + */ + ti,no-idle; + + mac: ethernet@0 { + compatible = "ti,dra7-cpsw","ti,cpsw"; + clocks = <&gmac_main_clk>, <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>; + clock-names = "fck", "cpts"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + mac_control = <0x20>; + slaves = <2>; + active_slave = <0>; + cpts_clock_mult = <0x784CFE14>; + cpts_clock_shift = <29>; + reg = <0x0 0x1000 + 0x1200 0x2e00>; + #address-cells = <1>; + #size-cells = <1>; + + /* + * rx_thresh_pend + * rx_pend + * tx_pend + * misc_pend + */ + interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0 0 0x4000>; + syscon = <&scm_conf>; + cpsw-phy-sel = <&phy_sel>; + status = "disabled"; + + davinci_mdio: mdio@1000 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + reg = <0x1000 0x100>; + }; + + cpsw_emac0: slave@200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + cpsw_emac1: slave@300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + }; + }; +}; + +&l4_per3 { /* 0x48800000 */ + compatible = "ti,dra7-l4-per3", "simple-bus"; + reg = <0x48800000 0x800>, + <0x48800800 0x800>, + <0x48801000 0x400>, + <0x48801400 0x400>, + <0x48801800 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x48800000 0x200000>; /* segment 0 */ + + segment@0 { /* 0x48800000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00000800 0x00000800 0x000800>, /* ap 1 */ + <0x00001000 0x00001000 0x000400>, /* ap 2 */ + <0x00001400 0x00001400 0x000400>, /* ap 3 */ + <0x00001800 0x00001800 0x000400>, /* ap 4 */ + <0x00020000 0x00020000 0x001000>, /* ap 5 */ + <0x00021000 0x00021000 0x001000>, /* ap 6 */ + <0x00022000 0x00022000 0x001000>, /* ap 7 */ + <0x00023000 0x00023000 0x001000>, /* ap 8 */ + <0x00024000 0x00024000 0x001000>, /* ap 9 */ + <0x00025000 0x00025000 0x001000>, /* ap 10 */ + <0x00026000 0x00026000 0x001000>, /* ap 11 */ + <0x00027000 0x00027000 0x001000>, /* ap 12 */ + <0x00028000 0x00028000 0x001000>, /* ap 13 */ + <0x00029000 0x00029000 0x001000>, /* ap 14 */ + <0x0002a000 0x0002a000 0x001000>, /* ap 15 */ + <0x0002b000 0x0002b000 0x001000>, /* ap 16 */ + <0x0002c000 0x0002c000 0x001000>, /* ap 17 */ + <0x0002d000 0x0002d000 0x001000>, /* ap 18 */ + <0x0002e000 0x0002e000 0x001000>, /* ap 19 */ + <0x0002f000 0x0002f000 0x001000>, /* ap 20 */ + <0x00170000 0x00170000 0x010000>, /* ap 21 */ + <0x00180000 0x00180000 0x001000>, /* ap 22 */ + <0x00190000 0x00190000 0x010000>, /* ap 23 */ + <0x001a0000 0x001a0000 0x001000>, /* ap 24 */ + <0x001b0000 0x001b0000 0x010000>, /* ap 25 */ + <0x001c0000 0x001c0000 0x001000>, /* ap 26 */ + <0x001d0000 0x001d0000 0x010000>, /* ap 27 */ + <0x001e0000 0x001e0000 0x001000>, /* ap 28 */ + <0x00038000 0x00038000 0x001000>, /* ap 29 */ + <0x00039000 0x00039000 0x001000>, /* ap 30 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 31 */ + <0x0005d000 0x0005d000 0x001000>, /* ap 32 */ + <0x0003a000 0x0003a000 0x001000>, /* ap 33 */ + <0x0003b000 0x0003b000 0x001000>, /* ap 34 */ + <0x0003c000 0x0003c000 0x001000>, /* ap 35 */ + <0x0003d000 0x0003d000 0x001000>, /* ap 36 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 37 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 38 */ + <0x00040000 0x00040000 0x001000>, /* ap 39 */ + <0x00041000 0x00041000 0x001000>, /* ap 40 */ + <0x00042000 0x00042000 0x001000>, /* ap 41 */ + <0x00043000 0x00043000 0x001000>, /* ap 42 */ + <0x00044000 0x00044000 0x001000>, /* ap 43 */ + <0x00045000 0x00045000 0x001000>, /* ap 44 */ + <0x00046000 0x00046000 0x001000>, /* ap 45 */ + <0x00047000 0x00047000 0x001000>, /* ap 46 */ + <0x00048000 0x00048000 0x001000>, /* ap 47 */ + <0x00049000 0x00049000 0x001000>, /* ap 48 */ + <0x0004a000 0x0004a000 0x001000>, /* ap 49 */ + <0x0004b000 0x0004b000 0x001000>, /* ap 50 */ + <0x0004c000 0x0004c000 0x001000>, /* ap 51 */ + <0x0004d000 0x0004d000 0x001000>, /* ap 52 */ + <0x0004e000 0x0004e000 0x001000>, /* ap 53 */ + <0x0004f000 0x0004f000 0x001000>, /* ap 54 */ + <0x00050000 0x00050000 0x001000>, /* ap 55 */ + <0x00051000 0x00051000 0x001000>, /* ap 56 */ + <0x00052000 0x00052000 0x001000>, /* ap 57 */ + <0x00053000 0x00053000 0x001000>, /* ap 58 */ + <0x00054000 0x00054000 0x001000>, /* ap 59 */ + <0x00055000 0x00055000 0x001000>, /* ap 60 */ + <0x00056000 0x00056000 0x001000>, /* ap 61 */ + <0x00057000 0x00057000 0x001000>, /* ap 62 */ + <0x00058000 0x00058000 0x001000>, /* ap 63 */ + <0x00059000 0x00059000 0x001000>, /* ap 64 */ + <0x0005a000 0x0005a000 0x001000>, /* ap 65 */ + <0x0005b000 0x0005b000 0x001000>, /* ap 66 */ + <0x00064000 0x00064000 0x001000>, /* ap 67 */ + <0x00065000 0x00065000 0x001000>, /* ap 68 */ + <0x0005e000 0x0005e000 0x001000>, /* ap 69 */ + <0x0005f000 0x0005f000 0x001000>, /* ap 70 */ + <0x00060000 0x00060000 0x001000>, /* ap 71 */ + <0x00061000 0x00061000 0x001000>, /* ap 72 */ + <0x00062000 0x00062000 0x001000>, /* ap 73 */ + <0x00063000 0x00063000 0x001000>, /* ap 74 */ + <0x00140000 0x00140000 0x020000>, /* ap 75 */ + <0x00160000 0x00160000 0x001000>, /* ap 76 */ + <0x00016000 0x00016000 0x001000>, /* ap 77 */ + <0x00017000 0x00017000 0x001000>, /* ap 78 */ + <0x000c0000 0x000c0000 0x020000>, /* ap 79 */ + <0x000e0000 0x000e0000 0x001000>, /* ap 80 */ + <0x00004000 0x00004000 0x001000>, /* ap 81 */ + <0x00005000 0x00005000 0x001000>, /* ap 82 */ + <0x00080000 0x00080000 0x020000>, /* ap 83 */ + <0x000a0000 0x000a0000 0x001000>, /* ap 84 */ + <0x00100000 0x00100000 0x020000>, /* ap 85 */ + <0x00120000 0x00120000 0x001000>, /* ap 86 */ + <0x00010000 0x00010000 0x001000>, /* ap 87 */ + <0x00011000 0x00011000 0x001000>, /* ap 88 */ + <0x0000a000 0x0000a000 0x001000>, /* ap 89 */ + <0x0000b000 0x0000b000 0x001000>, /* ap 90 */ + <0x0001c000 0x0001c000 0x001000>, /* ap 91 */ + <0x0001d000 0x0001d000 0x001000>, /* ap 92 */ + <0x0001e000 0x0001e000 0x001000>, /* ap 93 */ + <0x0001f000 0x0001f000 0x001000>, /* ap 94 */ + <0x00002000 0x00002000 0x001000>, /* ap 95 */ + <0x00003000 0x00003000 0x001000>; /* ap 96 */ + + target-module@2000 { /* 0x48802000, ap 95 7c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox13"; + reg = <0x2000 0x4>, + <0x2010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX13_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + + mailbox13: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@4000 { /* 0x48804000, ap 81 20.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + }; + + target-module@a000 { /* 0x4880a000, ap 89 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + }; + + target-module@10000 { /* 0x48810000, ap 87 28.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x1000>; + }; + + target-module@16000 { /* 0x48816000, ap 77 1e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x16000 0x1000>; + }; + + target-module@1c000 { /* 0x4881c000, ap 91 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1c000 0x1000>; + }; + + target-module@1e000 { /* 0x4881e000, ap 93 2c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e000 0x1000>; + }; + + target-module@20000 { /* 0x48820000, ap 5 08.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer5"; + reg = <0x20000 0x4>, + <0x20010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ + clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + + timer5: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@22000 { /* 0x48822000, ap 7 24.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer6"; + reg = <0x22000 0x4>, + <0x22010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ + clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>; + + timer6: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@24000 { /* 0x48824000, ap 9 26.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer7"; + reg = <0x24000 0x4>, + <0x24010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ + clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + timer7: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@26000 { /* 0x48826000, ap 11 0c.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer8"; + reg = <0x26000 0x4>, + <0x26010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ + clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>; + + timer8: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@28000 { /* 0x48828000, ap 13 16.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer13"; + reg = <0x28000 0x4>, + <0x28010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per3_clkdm */ + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>; + + timer13: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@2a000 { /* 0x4882a000, ap 15 10.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer14"; + reg = <0x2a000 0x4>, + <0x2a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per3_clkdm */ + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>; + + timer14: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@2c000 { /* 0x4882c000, ap 17 02.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer15"; + reg = <0x2c000 0x4>, + <0x2c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per3_clkdm */ + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2c000 0x1000>; + + timer15: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@2e000 { /* 0x4882e000, ap 19 14.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer16"; + reg = <0x2e000 0x4>, + <0x2e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per3_clkdm */ + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2e000 0x1000>; + + timer16: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@38000 { /* 0x48838000, ap 29 12.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "rtcss"; + reg = <0x38074 0x4>, + <0x38078 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): rtc_pwrdm, rtc_clkdm */ + clocks = <&rtc_clkctrl DRA7_RTC_RTCSS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x38000 0x1000>; + + rtc: rtc@0 { + compatible = "ti,am3352-rtc"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_32k_ck>; + }; + }; + + target-module@3a000 { /* 0x4883a000, ap 33 3e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox2"; + reg = <0x3a000 0x4>, + <0x3a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3a000 0x1000>; + + mailbox2: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@3c000 { /* 0x4883c000, ap 35 3a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox3"; + reg = <0x3c000 0x4>, + <0x3c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3c000 0x1000>; + + mailbox3: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@3e000 { /* 0x4883e000, ap 37 46.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox4"; + reg = <0x3e000 0x4>, + <0x3e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + + mailbox4: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@40000 { /* 0x48840000, ap 39 64.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox5"; + reg = <0x40000 0x4>, + <0x40010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x1000>; + + mailbox5: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@42000 { /* 0x48842000, ap 41 4e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox6"; + reg = <0x42000 0x4>, + <0x42010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x42000 0x1000>; + + mailbox6: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@44000 { /* 0x48844000, ap 43 42.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox7"; + reg = <0x44000 0x4>, + <0x44010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX7_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x44000 0x1000>; + + mailbox7: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@46000 { /* 0x48846000, ap 45 48.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox8"; + reg = <0x46000 0x4>, + <0x46010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX8_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x46000 0x1000>; + + mailbox8: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@48000 { /* 0x48848000, ap 47 36.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x48000 0x1000>; + }; + + target-module@4a000 { /* 0x4884a000, ap 49 38.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4a000 0x1000>; + }; + + target-module@4c000 { /* 0x4884c000, ap 51 44.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4c000 0x1000>; + }; + + target-module@4e000 { /* 0x4884e000, ap 53 4c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4e000 0x1000>; + }; + + target-module@50000 { /* 0x48850000, ap 55 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x50000 0x1000>; + }; + + target-module@52000 { /* 0x48852000, ap 57 54.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x52000 0x1000>; + }; + + target-module@54000 { /* 0x48854000, ap 59 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x54000 0x1000>; + }; + + target-module@56000 { /* 0x48856000, ap 61 22.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x56000 0x1000>; + }; + + target-module@58000 { /* 0x48858000, ap 63 2a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x58000 0x1000>; + }; + + target-module@5a000 { /* 0x4885a000, ap 65 5c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5a000 0x1000>; + }; + + target-module@5c000 { /* 0x4885c000, ap 31 32.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5c000 0x1000>; + }; + + target-module@5e000 { /* 0x4885e000, ap 69 6c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox9"; + reg = <0x5e000 0x4>, + <0x5e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX9_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5e000 0x1000>; + + mailbox9: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@60000 { /* 0x48860000, ap 71 4a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox10"; + reg = <0x60000 0x4>, + <0x60010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX10_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + + mailbox10: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@62000 { /* 0x48862000, ap 73 74.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox11"; + reg = <0x62000 0x4>, + <0x62010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX11_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x62000 0x1000>; + + mailbox11: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@64000 { /* 0x48864000, ap 67 52.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox12"; + reg = <0x64000 0x4>, + <0x64010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX12_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x64000 0x1000>; + + mailbox12: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@80000 { /* 0x48880000, ap 83 0e.1 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_otg_ss1"; + reg = <0x80000 0x4>, + <0x80010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x20000>; + + omap_dwc3_1: omap_dwc3_1@0 { + compatible = "ti,dwc3"; + reg = <0x0 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges = <0 0 0x20000>; + + usb1: usb@10000 { + compatible = "snps,dwc3"; + reg = <0x10000 0x17000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; + phys = <&usb2_phy1>, <&usb3_phy1>; + phy-names = "usb2-phy", "usb3-phy"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; + }; + }; + }; + + target-module@c0000 { /* 0x488c0000, ap 79 06.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_otg_ss2"; + reg = <0xc0000 0x4>, + <0xc0010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc0000 0x20000>; + + omap_dwc3_2: omap_dwc3_2@0 { + compatible = "ti,dwc3"; + reg = <0x0 0x10000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges = <0 0 0x20000>; + + usb2: usb@10000 { + compatible = "snps,dwc3"; + reg = <0x10000 0x17000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; + phys = <&usb2_phy2>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; + snps,dis_metastability_quirk; + }; + }; + }; + + target-module@100000 { /* 0x48900000, ap 85 04.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_otg_ss3"; + reg = <0x100000 0x4>, + <0x100010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x100000 0x20000>; + + omap_dwc3_3: omap_dwc3_3@0 { + compatible = "ti,dwc3"; + reg = <0x0 0x10000>; + interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges = <0 0 0x20000>; + status = "disabled"; + + usb3: usb@10000 { + compatible = "snps,dwc3"; + reg = <0x10000 0x17000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; + }; + }; + }; + + target-module@140000 { /* 0x48940000, ap 75 3c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_otg_ss4"; + reg = <0x140000 0x4>, + <0x140010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x140000 0x20000>; + }; + + target-module@170000 { /* 0x48970000, ap 21 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x170000 0x10000>; + }; + + target-module@190000 { /* 0x48990000, ap 23 2e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x190000 0x10000>; + }; + + target-module@1b0000 { /* 0x489b0000, ap 25 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1b0000 0x10000>; + }; + + target-module@1d0000 { /* 0x489d0000, ap 27 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1d0000 0x10000>; + }; + }; +}; + +&l4_wkup { /* 0x4ae00000 */ + compatible = "ti,dra7-l4-wkup", "simple-bus"; + reg = <0x4ae00000 0x800>, + <0x4ae00800 0x800>, + <0x4ae01000 0x1000>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4ae00000 0x010000>, /* segment 0 */ + <0x00010000 0x4ae10000 0x010000>, /* segment 1 */ + <0x00020000 0x4ae20000 0x010000>, /* segment 2 */ + <0x00030000 0x4ae30000 0x010000>; /* segment 3 */ + + segment@0 { /* 0x4ae00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x001000>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00006000 0x00006000 0x002000>, /* ap 3 */ + <0x00008000 0x00008000 0x001000>, /* ap 4 */ + <0x00004000 0x00004000 0x001000>, /* ap 15 */ + <0x00005000 0x00005000 0x001000>, /* ap 16 */ + <0x0000c000 0x0000c000 0x001000>, /* ap 17 */ + <0x0000d000 0x0000d000 0x001000>; /* ap 18 */ + + target-module@4000 { /* 0x4ae04000, ap 15 40.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "counter_32k"; + reg = <0x4000 0x4>, + <0x4010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_COUNTER_32K_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + counter32k: counter@0 { + compatible = "ti,omap-counter32k"; + reg = <0x0 0x40>; + }; + }; + + target-module@6000 { /* 0x4ae06000, ap 3 10.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x6000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x2000>; + + prm: prm@0 { + compatible = "ti,dra7-prm", "simple-bus"; + reg = <0 0x3000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x3000>; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; + }; + }; + + target-module@c000 { /* 0x4ae0c000, ap 17 50.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xc000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + + scm_wkup: scm_conf@0 { + compatible = "syscon"; + reg = <0 0x1000>; + }; + }; + }; + + segment@10000 { /* 0x4ae10000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ + <0x00001000 0x00011000 0x001000>, /* ap 6 */ + <0x00004000 0x00014000 0x001000>, /* ap 7 */ + <0x00005000 0x00015000 0x001000>, /* ap 8 */ + <0x00008000 0x00018000 0x001000>, /* ap 9 */ + <0x00009000 0x00019000 0x001000>, /* ap 10 */ + <0x0000c000 0x0001c000 0x001000>, /* ap 11 */ + <0x0000d000 0x0001d000 0x001000>; /* ap 12 */ + + target-module@0 { /* 0x4ae10000, ap 5 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio1"; + reg = <0x0 0x4>, + <0x10 0x4>, + <0x114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_GPIO1_CLKCTRL 0>, + <&wkupaon_clkctrl DRA7_WKUPAON_GPIO1_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + gpio1: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@4000 { /* 0x4ae14000, ap 7 28.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "wd_timer2"; + reg = <0x4000 0x4>, + <0x4010 0x4>, + <0x4014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_WD_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + wdt2: wdt@0 { + compatible = "ti,omap3-wdt"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@8000 { /* 0x4ae18000, ap 9 30.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer1"; + reg = <0x8000 0x4>, + <0x8010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + + timer1: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-alwon; + }; + }; + + target-module@c000 { /* 0x4ae1c000, ap 11 38.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + }; + }; + + segment@20000 { /* 0x4ae20000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ + <0x0000a000 0x0002a000 0x001000>, /* ap 14 */ + <0x00000000 0x00020000 0x001000>, /* ap 19 */ + <0x00001000 0x00021000 0x001000>, /* ap 20 */ + <0x00002000 0x00022000 0x001000>, /* ap 21 */ + <0x00003000 0x00023000 0x001000>, /* ap 22 */ + <0x00007000 0x00027000 0x000400>, /* ap 23 */ + <0x00008000 0x00028000 0x000800>, /* ap 24 */ + <0x00009000 0x00029000 0x000100>, /* ap 25 */ + <0x00008800 0x00028800 0x000200>, /* ap 26 */ + <0x00008a00 0x00028a00 0x000100>, /* ap 27 */ + <0x0000b000 0x0002b000 0x001000>, /* ap 28 */ + <0x0000c000 0x0002c000 0x001000>, /* ap 29 */ + <0x0000f000 0x0002f000 0x001000>; /* ap 32 */ + + target-module@0 { /* 0x4ae20000, ap 19 08.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer12"; + reg = <0x0 0x4>, + <0x10 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER12_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + timer12: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER12_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-alwon; + ti,timer-secure; + }; + }; + + target-module@2000 { /* 0x4ae22000, ap 21 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@6000 { /* 0x4ae26000, ap 13 48.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00006000 0x00001000>, + <0x00001000 0x00007000 0x00000400>, + <0x00002000 0x00008000 0x00000800>, + <0x00002800 0x00008800 0x00000200>, + <0x00002a00 0x00008a00 0x00000100>, + <0x00003000 0x00009000 0x00000100>; + }; + + target-module@b000 { /* 0x4ae2b000, ap 28 02.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart10"; + reg = <0xb050 0x4>, + <0xb054 0x4>, + <0xb058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_UART10_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb000 0x1000>; + + uart10: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + }; + }; + + target-module@f000 { /* 0x4ae2f000, ap 32 58.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf000 0x1000>; + }; + }; + + segment@30000 { /* 0x4ae30000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0000c000 0x0003c000 0x002000>, /* ap 30 */ + <0x0000e000 0x0003e000 0x001000>, /* ap 31 */ + <0x00000000 0x00030000 0x001000>, /* ap 33 */ + <0x00001000 0x00031000 0x001000>, /* ap 34 */ + <0x00002000 0x00032000 0x001000>, /* ap 35 */ + <0x00003000 0x00033000 0x001000>, /* ap 36 */ + <0x00004000 0x00034000 0x001000>, /* ap 37 */ + <0x00005000 0x00035000 0x001000>, /* ap 38 */ + <0x00006000 0x00036000 0x001000>, /* ap 39 */ + <0x00007000 0x00037000 0x001000>, /* ap 40 */ + <0x00008000 0x00038000 0x001000>, /* ap 41 */ + <0x00009000 0x00039000 0x001000>, /* ap 42 */ + <0x0000a000 0x0003a000 0x001000>; /* ap 43 */ + + target-module@1000 { /* 0x4ae31000, ap 34 60.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1000 0x1000>; + }; + + target-module@3000 { /* 0x4ae33000, ap 36 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3000 0x1000>; + }; + + target-module@5000 { /* 0x4ae35000, ap 38 0c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5000 0x1000>; + }; + + target-module@7000 { /* 0x4ae37000, ap 40 68.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7000 0x1000>; + }; + + target-module@9000 { /* 0x4ae39000, ap 42 70.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9000 0x1000>; + }; + + target-module@c000 { /* 0x4ae3c000, ap 30 04.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xc000 0x4>; + reg-names = "rev"; + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x2000>; + + dcan1: can@0 { + compatible = "ti,dra7-d_can"; + reg = <0x0 0x2000>; + syscon-raminit = <&scm_conf 0x558 0>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 24>; + status = "disabled"; + }; + }; + }; +}; + diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 7ce24b282d42..2bc9add8b7a5 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -156,153 +156,15 @@ interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - l4_cfg: l4@4a000000 { - compatible = "ti,dra7-l4-cfg", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a000000 0x22c000>; - - scm: scm@2000 { - compatible = "ti,dra7-scm-core", "simple-bus"; - reg = <0x2000 0x2000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x2000 0x2000>; - - scm_conf: scm_conf@0 { - compatible = "syscon", "simple-bus"; - reg = <0x0 0x1400>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0x1400>; - - pbias_regulator: pbias_regulator@e00 { - compatible = "ti,pbias-dra7", "ti,pbias-omap"; - reg = <0xe00 0x4>; - syscon = <&scm_conf>; - pbias_mmc_reg: pbias_mmc_omap5 { - regulator-name = "pbias_mmc_omap5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - }; - - scm_conf_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - dra7_pmx_core: pinmux@1400 { - compatible = "ti,dra7-padconf", - "pinctrl-single"; - reg = <0x1400 0x0468>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x3fffffff>; - }; - - scm_conf1: scm_conf@1c04 { - compatible = "syscon"; - reg = <0x1c04 0x0020>; - #syscon-cells = <2>; - }; - - scm_conf_pcie: scm_conf@1c24 { - compatible = "syscon"; - reg = <0x1c24 0x0024>; - }; - - sdma_xbar: dma-router@b78 { - compatible = "ti,dra7-dma-crossbar"; - reg = <0xb78 0xfc>; - #dma-cells = <1>; - dma-requests = <205>; - ti,dma-safe-map = <0>; - dma-masters = <&sdma>; - }; - - edma_xbar: dma-router@c78 { - compatible = "ti,dra7-dma-crossbar"; - reg = <0xc78 0x7c>; - #dma-cells = <2>; - dma-requests = <204>; - ti,dma-safe-map = <0>; - dma-masters = <&edma>; - }; - }; - - cm_core_aon: cm_core_aon@5000 { - compatible = "ti,dra7-cm-core-aon", - "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x5000 0x2000>; - ranges = <0 0x5000 0x2000>; - - cm_core_aon_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm_core_aon_clockdomains: clockdomains { - }; - }; - - cm_core: cm_core@8000 { - compatible = "ti,dra7-cm-core", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x8000 0x3000>; - ranges = <0 0x8000 0x3000>; - - cm_core_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm_core_clockdomains: clockdomains { - }; - }; + l4_cfg: interconnect@4a000000 { }; - - l4_wkup: l4@4ae00000 { - compatible = "ti,dra7-l4-wkup", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4ae00000 0x3f000>; - - counter32k: counter@4000 { - compatible = "ti,omap-counter32k"; - reg = <0x4000 0x40>; - ti,hwmods = "counter_32k"; - }; - - prm: prm@6000 { - compatible = "ti,dra7-prm", "simple-bus"; - reg = <0x6000 0x3000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x6000 0x3000>; - - prm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - prm_clockdomains: clockdomains { - }; - }; - - scm_wkup: scm_conf@c000 { - compatible = "syscon"; - reg = <0xc000 0x1000>; - }; + l4_wkup: interconnect@4ae00000 { + }; + l4_per1: interconnect@48000000 { + }; + l4_per2: interconnect@48400000 { + }; + l4_per3: interconnect@48800000 { }; axi@0 { @@ -469,19 +331,6 @@ #pinctrl-cells = <2>; }; - sdma: dma-controller@4a056000 { - compatible = "ti,omap4430-sdma"; - reg = <0x4a056000 0x1000>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - dma-channels = <32>; - dma-requests = <127>; - ti,hwmods = "dma_system"; - }; - edma: edma@43300000 { compatible = "ti,edma3-tpcc"; ti,hwmods = "tpcc"; @@ -521,508 +370,6 @@ interrupt-names = "edma3_tcerrint"; }; - gpio1: gpio@4ae10000 { - compatible = "ti,omap4-gpio"; - reg = <0x4ae10000 0x200>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio1"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@48055000 { - compatible = "ti,omap4-gpio"; - reg = <0x48055000 0x200>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio2"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@48057000 { - compatible = "ti,omap4-gpio"; - reg = <0x48057000 0x200>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio3"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@48059000 { - compatible = "ti,omap4-gpio"; - reg = <0x48059000 0x200>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio4"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio5: gpio@4805b000 { - compatible = "ti,omap4-gpio"; - reg = <0x4805b000 0x200>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio5"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio6: gpio@4805d000 { - compatible = "ti,omap4-gpio"; - reg = <0x4805d000 0x200>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio6"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio7: gpio@48051000 { - compatible = "ti,omap4-gpio"; - reg = <0x48051000 0x200>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio7"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio8: gpio@48053000 { - compatible = "ti,omap4-gpio"; - reg = <0x48053000 0x200>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio8"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - uart1: serial@4806a000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x4806a000 0x100>; - interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart1"; - clock-frequency = <48000000>; - status = "disabled"; - dmas = <&sdma_xbar 49>, <&sdma_xbar 50>; - dma-names = "tx", "rx"; - }; - - uart2: serial@4806c000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart2"; - clock-frequency = <48000000>; - status = "disabled"; - dmas = <&sdma_xbar 51>, <&sdma_xbar 52>; - dma-names = "tx", "rx"; - }; - - uart3: serial@48020000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart3"; - clock-frequency = <48000000>; - status = "disabled"; - dmas = <&sdma_xbar 53>, <&sdma_xbar 54>; - dma-names = "tx", "rx"; - }; - - uart4: serial@4806e000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - status = "disabled"; - dmas = <&sdma_xbar 55>, <&sdma_xbar 56>; - dma-names = "tx", "rx"; - }; - - uart5: serial@48066000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x48066000 0x100>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart5"; - clock-frequency = <48000000>; - status = "disabled"; - dmas = <&sdma_xbar 63>, <&sdma_xbar 64>; - dma-names = "tx", "rx"; - }; - - uart6: serial@48068000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x48068000 0x100>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart6"; - clock-frequency = <48000000>; - status = "disabled"; - dmas = <&sdma_xbar 79>, <&sdma_xbar 80>; - dma-names = "tx", "rx"; - }; - - uart7: serial@48420000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x48420000 0x100>; - interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart7"; - clock-frequency = <48000000>; - status = "disabled"; - }; - - uart8: serial@48422000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x48422000 0x100>; - interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart8"; - clock-frequency = <48000000>; - status = "disabled"; - }; - - uart9: serial@48424000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x48424000 0x100>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart9"; - clock-frequency = <48000000>; - status = "disabled"; - }; - - uart10: serial@4ae2b000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x4ae2b000 0x100>; - interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart10"; - clock-frequency = <48000000>; - status = "disabled"; - }; - - mailbox1: mailbox@4a0f4000 { - compatible = "ti,omap4-mailbox"; - reg = <0x4a0f4000 0x200>; - interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox1"; - #mbox-cells = <1>; - ti,mbox-num-users = <3>; - ti,mbox-num-fifos = <8>; - status = "disabled"; - }; - - mailbox2: mailbox@4883a000 { - compatible = "ti,omap4-mailbox"; - reg = <0x4883a000 0x200>; - interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox2"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox3: mailbox@4883c000 { - compatible = "ti,omap4-mailbox"; - reg = <0x4883c000 0x200>; - interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox3"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox4: mailbox@4883e000 { - compatible = "ti,omap4-mailbox"; - reg = <0x4883e000 0x200>; - interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox4"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox5: mailbox@48840000 { - compatible = "ti,omap4-mailbox"; - reg = <0x48840000 0x200>; - interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox5"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox6: mailbox@48842000 { - compatible = "ti,omap4-mailbox"; - reg = <0x48842000 0x200>; - interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox6"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox7: mailbox@48844000 { - compatible = "ti,omap4-mailbox"; - reg = <0x48844000 0x200>; - interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox7"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox8: mailbox@48846000 { - compatible = "ti,omap4-mailbox"; - reg = <0x48846000 0x200>; - interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox8"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox9: mailbox@4885e000 { - compatible = "ti,omap4-mailbox"; - reg = <0x4885e000 0x200>; - interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox9"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox10: mailbox@48860000 { - compatible = "ti,omap4-mailbox"; - reg = <0x48860000 0x200>; - interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox10"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox11: mailbox@48862000 { - compatible = "ti,omap4-mailbox"; - reg = <0x48862000 0x200>; - interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox11"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox12: mailbox@48864000 { - compatible = "ti,omap4-mailbox"; - reg = <0x48864000 0x200>; - interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox12"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox13: mailbox@48802000 { - compatible = "ti,omap4-mailbox"; - reg = <0x48802000 0x200>; - interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox13"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - timer1: timer@4ae18000 { - compatible = "ti,omap5430-timer"; - reg = <0x4ae18000 0x80>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer1"; - ti,timer-alwon; - clock-names = "fck"; - clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>; - }; - - timer2: timer@48032000 { - compatible = "ti,omap5430-timer"; - reg = <0x48032000 0x80>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer2"; - }; - - timer3: timer@48034000 { - compatible = "ti,omap5430-timer"; - reg = <0x48034000 0x80>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer3"; - }; - - timer4: timer@48036000 { - compatible = "ti,omap5430-timer"; - reg = <0x48036000 0x80>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer4"; - }; - - timer5: timer@48820000 { - compatible = "ti,omap5430-timer"; - reg = <0x48820000 0x80>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer5"; - }; - - timer6: timer@48822000 { - compatible = "ti,omap5430-timer"; - reg = <0x48822000 0x80>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer6"; - }; - - timer7: timer@48824000 { - compatible = "ti,omap5430-timer"; - reg = <0x48824000 0x80>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer7"; - }; - - timer8: timer@48826000 { - compatible = "ti,omap5430-timer"; - reg = <0x48826000 0x80>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer8"; - }; - - timer9: timer@4803e000 { - compatible = "ti,omap5430-timer"; - reg = <0x4803e000 0x80>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer9"; - }; - - timer10: timer@48086000 { - compatible = "ti,omap5430-timer"; - reg = <0x48086000 0x80>; - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer10"; - }; - - timer11: timer@48088000 { - compatible = "ti,omap5430-timer"; - reg = <0x48088000 0x80>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer11"; - }; - - timer12: timer@4ae20000 { - compatible = "ti,omap5430-timer"; - reg = <0x4ae20000 0x80>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer12"; - ti,timer-alwon; - ti,timer-secure; - }; - - timer13: timer@48828000 { - compatible = "ti,omap5430-timer"; - reg = <0x48828000 0x80>; - interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer13"; - }; - - timer14: timer@4882a000 { - compatible = "ti,omap5430-timer"; - reg = <0x4882a000 0x80>; - interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer14"; - }; - - timer15: timer@4882c000 { - compatible = "ti,omap5430-timer"; - reg = <0x4882c000 0x80>; - interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer15"; - }; - - timer16: timer@4882e000 { - compatible = "ti,omap5430-timer"; - reg = <0x4882e000 0x80>; - interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer16"; - }; - - wdt2: wdt@4ae14000 { - compatible = "ti,omap3-wdt"; - reg = <0x4ae14000 0x80>; - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "wd_timer2"; - }; - - hwspinlock: spinlock@4a0f6000 { - compatible = "ti,omap4-hwspinlock"; - reg = <0x4a0f6000 0x1000>; - ti,hwmods = "spinlock"; - #hwlock-cells = <1>; - }; - dmm@4e000000 { compatible = "ti,omap5-dmm"; reg = <0x4e000000 0x800>; @@ -1030,112 +377,6 @@ ti,hwmods = "dmm"; }; - i2c1: i2c@48070000 { - compatible = "ti,omap4-i2c"; - reg = <0x48070000 0x100>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c1"; - status = "disabled"; - }; - - i2c2: i2c@48072000 { - compatible = "ti,omap4-i2c"; - reg = <0x48072000 0x100>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c2"; - status = "disabled"; - }; - - i2c3: i2c@48060000 { - compatible = "ti,omap4-i2c"; - reg = <0x48060000 0x100>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c3"; - status = "disabled"; - }; - - i2c4: i2c@4807a000 { - compatible = "ti,omap4-i2c"; - reg = <0x4807a000 0x100>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c4"; - status = "disabled"; - }; - - i2c5: i2c@4807c000 { - compatible = "ti,omap4-i2c"; - reg = <0x4807c000 0x100>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c5"; - status = "disabled"; - }; - - mmc1: mmc@4809c000 { - compatible = "ti,dra7-sdhci"; - reg = <0x4809c000 0x400>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc1"; - status = "disabled"; - pbias-supply = <&pbias_mmc_reg>; - max-frequency = <192000000>; - mmc-ddr-1_8v; - mmc-ddr-3_3v; - }; - - hdqw1w: 1w@480b2000 { - compatible = "ti,omap3-1w"; - reg = <0x480b2000 0x1000>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "hdq1w"; - }; - - mmc2: mmc@480b4000 { - compatible = "ti,dra7-sdhci"; - reg = <0x480b4000 0x400>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc2"; - status = "disabled"; - max-frequency = <192000000>; - /* SDR104/DDR50/SDR50 bits in CAPA2 is not supported */ - sdhci-caps-mask = <0x7 0x0>; - mmc-hs200-1_8v; - mmc-ddr-1_8v; - mmc-ddr-3_3v; - }; - - mmc3: mmc@480ad000 { - compatible = "ti,dra7-sdhci"; - reg = <0x480ad000 0x400>; - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc3"; - status = "disabled"; - /* Errata i887 limits max-frequency of MMC3 to 64 MHz */ - max-frequency = <64000000>; - /* SDMA is not supported */ - sdhci-caps-mask = <0x0 0x400000>; - }; - - mmc4: mmc@480d1000 { - compatible = "ti,dra7-sdhci"; - reg = <0x480d1000 0x400>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc4"; - status = "disabled"; - max-frequency = <192000000>; - /* SDMA is not supported */ - sdhci-caps-mask = <0x0 0x400000>; - }; - mmu0_dsp1: mmu@40d01000 { compatible = "ti,dra7-dsp-iommu"; reg = <0x40d01000 0x100>; @@ -1308,69 +549,6 @@ >; }; - mcspi1: spi@48098000 { - compatible = "ti,omap4-mcspi"; - reg = <0x48098000 0x200>; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi1"; - ti,spi-num-cs = <4>; - dmas = <&sdma_xbar 35>, - <&sdma_xbar 36>, - <&sdma_xbar 37>, - <&sdma_xbar 38>, - <&sdma_xbar 39>, - <&sdma_xbar 40>, - <&sdma_xbar 41>, - <&sdma_xbar 42>; - dma-names = "tx0", "rx0", "tx1", "rx1", - "tx2", "rx2", "tx3", "rx3"; - status = "disabled"; - }; - - mcspi2: spi@4809a000 { - compatible = "ti,omap4-mcspi"; - reg = <0x4809a000 0x200>; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi2"; - ti,spi-num-cs = <2>; - dmas = <&sdma_xbar 43>, - <&sdma_xbar 44>, - <&sdma_xbar 45>, - <&sdma_xbar 46>; - dma-names = "tx0", "rx0", "tx1", "rx1"; - status = "disabled"; - }; - - mcspi3: spi@480b8000 { - compatible = "ti,omap4-mcspi"; - reg = <0x480b8000 0x200>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi3"; - ti,spi-num-cs = <2>; - dmas = <&sdma_xbar 15>, <&sdma_xbar 16>; - dma-names = "tx0", "rx0"; - status = "disabled"; - }; - - mcspi4: spi@480ba000 { - compatible = "ti,omap4-mcspi"; - reg = <0x480ba000 0x200>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi4"; - ti,spi-num-cs = <1>; - dmas = <&sdma_xbar 70>, <&sdma_xbar 71>; - dma-names = "tx0", "rx0"; - status = "disabled"; - }; - qspi: spi@4b300000 { compatible = "ti,dra7xxx-qspi"; reg = <0x4b300000 0x100>, @@ -1380,7 +558,7 @@ #address-cells = <1>; #size-cells = <0>; ti,hwmods = "qspi"; - clocks = <&l4per_clkctrl DRA7_QSPI_CLKCTRL 25>; + clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>; clock-names = "fck"; num-cs = <4>; interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; @@ -1388,266 +566,19 @@ }; /* OCP2SCP3 */ - ocp2scp@4a090000 { - compatible = "ti,omap-ocp2scp"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - reg = <0x4a090000 0x20>; - ti,hwmods = "ocp2scp3"; - sata_phy: phy@4a096000 { - compatible = "ti,phy-pipe3-sata"; - reg = <0x4A096000 0x80>, /* phy_rx */ - <0x4A096400 0x64>, /* phy_tx */ - <0x4A096800 0x40>; /* pll_ctrl */ - reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - syscon-phy-power = <&scm_conf 0x374>; - clocks = <&sys_clkin1>, - <&l3init_clkctrl DRA7_SATA_CLKCTRL 8>; - clock-names = "sysclk", "refclk"; - syscon-pllreset = <&scm_conf 0x3fc>; - #phy-cells = <0>; - }; - - pcie1_phy: pciephy@4a094000 { - compatible = "ti,phy-pipe3-pcie"; - reg = <0x4a094000 0x80>, /* phy_rx */ - <0x4a094400 0x64>; /* phy_tx */ - reg-names = "phy_rx", "phy_tx"; - syscon-phy-power = <&scm_conf_pcie 0x1c>; - syscon-pcs = <&scm_conf_pcie 0x10>; - clocks = <&dpll_pcie_ref_ck>, - <&dpll_pcie_ref_m2ldo_ck>, - <&l3init_clkctrl DRA7_PCIE1_CLKCTRL 8>, - <&l3init_clkctrl DRA7_PCIE1_CLKCTRL 9>, - <&l3init_clkctrl DRA7_PCIE1_CLKCTRL 10>, - <&optfclk_pciephy_div>, - <&sys_clkin1>; - clock-names = "dpll_ref", "dpll_ref_m2", - "wkupclk", "refclk", - "div-clk", "phy-div", "sysclk"; - #phy-cells = <0>; - }; - - pcie2_phy: pciephy@4a095000 { - compatible = "ti,phy-pipe3-pcie"; - reg = <0x4a095000 0x80>, /* phy_rx */ - <0x4a095400 0x64>; /* phy_tx */ - reg-names = "phy_rx", "phy_tx"; - syscon-phy-power = <&scm_conf_pcie 0x20>; - syscon-pcs = <&scm_conf_pcie 0x10>; - clocks = <&dpll_pcie_ref_ck>, - <&dpll_pcie_ref_m2ldo_ck>, - <&l3init_clkctrl DRA7_PCIE2_CLKCTRL 8>, - <&l3init_clkctrl DRA7_PCIE2_CLKCTRL 9>, - <&l3init_clkctrl DRA7_PCIE2_CLKCTRL 10>, - <&optfclk_pciephy_div>, - <&sys_clkin1>; - clock-names = "dpll_ref", "dpll_ref_m2", - "wkupclk", "refclk", - "div-clk", "phy-div", "sysclk"; - #phy-cells = <0>; - status = "disabled"; - }; - }; - sata: sata@4a141100 { compatible = "snps,dwc-ahci"; reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; phys = <&sata_phy>; phy-names = "sata-phy"; - clocks = <&l3init_clkctrl DRA7_SATA_CLKCTRL 8>; + clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>; ti,hwmods = "sata"; ports-implemented = <0x1>; }; - rtc: rtc@48838000 { - compatible = "ti,am3352-rtc"; - reg = <0x48838000 0x100>; - interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "rtcss"; - clocks = <&sys_32k_ck>; - }; - /* OCP2SCP1 */ - ocp2scp@4a080000 { - compatible = "ti,omap-ocp2scp"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - reg = <0x4a080000 0x20>; - ti,hwmods = "ocp2scp1"; - - usb2_phy1: phy@4a084000 { - compatible = "ti,dra7x-usb2", "ti,omap-usb2"; - reg = <0x4a084000 0x400>; - syscon-phy-power = <&scm_conf 0x300>; - clocks = <&usb_phy1_always_on_clk32k>, - <&l3init_clkctrl DRA7_USB_OTG_SS1_CLKCTRL 8>; - clock-names = "wkupclk", - "refclk"; - #phy-cells = <0>; - }; - - usb2_phy2: phy@4a085000 { - compatible = "ti,dra7x-usb2-phy2", - "ti,omap-usb2"; - reg = <0x4a085000 0x400>; - syscon-phy-power = <&scm_conf 0xe74>; - clocks = <&usb_phy2_always_on_clk32k>, - <&l3init_clkctrl DRA7_USB_OTG_SS2_CLKCTRL 8>; - clock-names = "wkupclk", - "refclk"; - #phy-cells = <0>; - }; - - usb3_phy1: phy@4a084400 { - compatible = "ti,omap-usb3"; - reg = <0x4a084400 0x80>, - <0x4a084800 0x64>, - <0x4a084c00 0x40>; - reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - syscon-phy-power = <&scm_conf 0x370>; - clocks = <&usb_phy3_always_on_clk32k>, - <&sys_clkin1>, - <&l3init_clkctrl DRA7_USB_OTG_SS1_CLKCTRL 8>; - clock-names = "wkupclk", - "sysclk", - "refclk"; - #phy-cells = <0>; - }; - }; - - target-module@4a0dd000 { - compatible = "ti,sysc-omap4-sr", "ti,sysc"; - ti,hwmods = "smartreflex_core"; - reg = <0x4a0dd038 0x4>; - reg-names = "sysc"; - ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&coreaon_clkctrl DRA7_SMARTREFLEX_CORE_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a0dd000 0x001000>; - - /* SmartReflex child device marked reserved in TRM */ - }; - - target-module@4a0d9000 { - compatible = "ti,sysc-omap4-sr", "ti,sysc"; - ti,hwmods = "smartreflex_mpu"; - reg = <0x4a0d9038 0x4>; - reg-names = "sysc"; - ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&coreaon_clkctrl DRA7_SMARTREFLEX_MPU_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a0d9000 0x001000>; - - /* SmartReflex child device marked reserved in TRM */ - }; - - omap_dwc3_1: omap_dwc3_1@48880000 { - compatible = "ti,dwc3"; - ti,hwmods = "usb_otg_ss1"; - reg = <0x48880000 0x10000>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - utmi-mode = <2>; - ranges; - usb1: usb@48890000 { - compatible = "snps,dwc3"; - reg = <0x48890000 0x17000>; - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "peripheral", - "host", - "otg"; - phys = <&usb2_phy1>, <&usb3_phy1>; - phy-names = "usb2-phy", "usb3-phy"; - maximum-speed = "super-speed"; - dr_mode = "otg"; - snps,dis_u3_susphy_quirk; - snps,dis_u2_susphy_quirk; - }; - }; - - omap_dwc3_2: omap_dwc3_2@488c0000 { - compatible = "ti,dwc3"; - ti,hwmods = "usb_otg_ss2"; - reg = <0x488c0000 0x10000>; - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - utmi-mode = <2>; - ranges; - usb2: usb@488d0000 { - compatible = "snps,dwc3"; - reg = <0x488d0000 0x17000>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "peripheral", - "host", - "otg"; - phys = <&usb2_phy2>; - phy-names = "usb2-phy"; - maximum-speed = "high-speed"; - dr_mode = "otg"; - snps,dis_u3_susphy_quirk; - snps,dis_u2_susphy_quirk; - snps,dis_metastability_quirk; - }; - }; - /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */ - omap_dwc3_3: omap_dwc3_3@48900000 { - compatible = "ti,dwc3"; - ti,hwmods = "usb_otg_ss3"; - reg = <0x48900000 0x10000>; - interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - utmi-mode = <2>; - ranges; - status = "disabled"; - usb3: usb@48910000 { - compatible = "snps,dwc3"; - reg = <0x48910000 0x17000>; - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "peripheral", - "host", - "otg"; - maximum-speed = "high-speed"; - dr_mode = "otg"; - snps,dis_u3_susphy_quirk; - snps,dis_u2_susphy_quirk; - }; - }; - - elm: elm@48078000 { - compatible = "ti,am3352-elm"; - reg = <0x48078000 0xfc0>; /* device IO registers */ - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "elm"; - status = "disabled"; - }; - gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; @@ -1666,154 +597,6 @@ status = "disabled"; }; - atl: atl@4843c000 { - compatible = "ti,dra7-atl"; - reg = <0x4843c000 0x3ff>; - ti,hwmods = "atl"; - ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, - <&atl_clkin2_ck>, <&atl_clkin3_ck>; - clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>; - clock-names = "fck"; - status = "disabled"; - }; - - mcasp1: mcasp@48460000 { - compatible = "ti,dra7-mcasp-audio"; - ti,hwmods = "mcasp1"; - reg = <0x48460000 0x2000>, - <0x45800000 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>; - dma-names = "tx", "rx"; - clocks = <&ipu_clkctrl DRA7_MCASP1_CLKCTRL 22>, <&ipu_clkctrl DRA7_MCASP1_CLKCTRL 24>, - <&ipu_clkctrl DRA7_MCASP1_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; - status = "disabled"; - }; - - mcasp2: mcasp@48464000 { - compatible = "ti,dra7-mcasp-audio"; - ti,hwmods = "mcasp2"; - reg = <0x48464000 0x2000>, - <0x45c00000 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>; - dma-names = "tx", "rx"; - clocks = <&l4per_clkctrl DRA7_MCASP2_CLKCTRL 22>, - <&l4per_clkctrl DRA7_MCASP2_CLKCTRL 24>, - <&l4per_clkctrl DRA7_MCASP2_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; - status = "disabled"; - }; - - mcasp3: mcasp@48468000 { - compatible = "ti,dra7-mcasp-audio"; - ti,hwmods = "mcasp3"; - reg = <0x48468000 0x2000>, - <0x46000000 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>; - dma-names = "tx", "rx"; - clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 22>, - <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>; - clock-names = "fck", "ahclkx"; - status = "disabled"; - }; - - mcasp4: mcasp@4846c000 { - compatible = "ti,dra7-mcasp-audio"; - ti,hwmods = "mcasp4"; - reg = <0x4846c000 0x2000>, - <0x48436000 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>; - dma-names = "tx", "rx"; - clocks = <&l4per_clkctrl DRA7_MCASP4_CLKCTRL 22>, - <&l4per_clkctrl DRA7_MCASP4_CLKCTRL 24>; - clock-names = "fck", "ahclkx"; - status = "disabled"; - }; - - mcasp5: mcasp@48470000 { - compatible = "ti,dra7-mcasp-audio"; - ti,hwmods = "mcasp5"; - reg = <0x48470000 0x2000>, - <0x4843a000 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>; - dma-names = "tx", "rx"; - clocks = <&l4per_clkctrl DRA7_MCASP5_CLKCTRL 22>, - <&l4per_clkctrl DRA7_MCASP5_CLKCTRL 24>; - clock-names = "fck", "ahclkx"; - status = "disabled"; - }; - - mcasp6: mcasp@48474000 { - compatible = "ti,dra7-mcasp-audio"; - ti,hwmods = "mcasp6"; - reg = <0x48474000 0x2000>, - <0x4844c000 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>; - dma-names = "tx", "rx"; - clocks = <&l4per_clkctrl DRA7_MCASP6_CLKCTRL 22>, - <&l4per_clkctrl DRA7_MCASP6_CLKCTRL 24>; - clock-names = "fck", "ahclkx"; - status = "disabled"; - }; - - mcasp7: mcasp@48478000 { - compatible = "ti,dra7-mcasp-audio"; - ti,hwmods = "mcasp7"; - reg = <0x48478000 0x2000>, - <0x48450000 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>; - dma-names = "tx", "rx"; - clocks = <&l4per_clkctrl DRA7_MCASP7_CLKCTRL 22>, - <&l4per_clkctrl DRA7_MCASP7_CLKCTRL 24>; - clock-names = "fck", "ahclkx"; - status = "disabled"; - }; - - mcasp8: mcasp@4847c000 { - compatible = "ti,dra7-mcasp-audio"; - ti,hwmods = "mcasp8"; - reg = <0x4847c000 0x2000>, - <0x48454000 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>; - dma-names = "tx", "rx"; - clocks = <&l4per_clkctrl DRA7_MCASP8_CLKCTRL 22>, - <&l4per_clkctrl DRA7_MCASP8_CLKCTRL 24>; - clock-names = "fck", "ahclkx"; - status = "disabled"; - }; - crossbar_mpu: crossbar@4a002a48 { compatible = "ti,irq-crossbar"; reg = <0x4a002a48 0x130>; @@ -1828,93 +611,6 @@ ti,irqs-safe-map = <0>; }; - mac: ethernet@48484000 { - compatible = "ti,dra7-cpsw","ti,cpsw"; - ti,hwmods = "gmac"; - clocks = <&gmac_main_clk>, <&l3init_clkctrl DRA7_GMAC_CLKCTRL 25>; - clock-names = "fck", "cpts"; - cpdma_channels = <8>; - ale_entries = <1024>; - bd_ram_size = <0x2000>; - mac_control = <0x20>; - slaves = <2>; - active_slave = <0>; - cpts_clock_mult = <0x784CFE14>; - cpts_clock_shift = <29>; - reg = <0x48484000 0x1000 - 0x48485200 0x2E00>; - #address-cells = <1>; - #size-cells = <1>; - - /* - * Do not allow gating of cpsw clock as workaround - * for errata i877. Keeping internal clock disabled - * causes the device switching characteristics - * to degrade over time and eventually fail to meet - * the data manual delay time/skew specs. - */ - ti,no-idle; - - /* - * rx_thresh_pend - * rx_pend - * tx_pend - * misc_pend - */ - interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; - ranges; - syscon = <&scm_conf>; - status = "disabled"; - - davinci_mdio: mdio@48485000 { - compatible = "ti,cpsw-mdio","ti,davinci_mdio"; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "davinci_mdio"; - bus_freq = <1000000>; - reg = <0x48485000 0x100>; - }; - - cpsw_emac0: slave@48480200 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - }; - - cpsw_emac1: slave@48480300 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - }; - - phy_sel: cpsw-phy-sel@4a002554 { - compatible = "ti,dra7xx-cpsw-phy-sel"; - reg= <0x4a002554 0x4>; - reg-names = "gmii-sel"; - }; - }; - - dcan1: can@4ae3c000 { - compatible = "ti,dra7-d_can"; - ti,hwmods = "dcan1"; - reg = <0x4ae3c000 0x2000>; - syscon-raminit = <&scm_conf 0x558 0>; - interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&wkupaon_clkctrl DRA7_DCAN1_CLKCTRL 24>; - status = "disabled"; - }; - - dcan2: can@48480000 { - compatible = "ti,dra7-d_can"; - ti,hwmods = "dcan2"; - reg = <0x48480000 0x2000>; - syscon-raminit = <&scm_conf 0x558 1>; - interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sys_clkin1>; - status = "disabled"; - }; - dss: dss@58000000 { compatible = "ti,dra7-dss"; /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */ @@ -1932,7 +628,7 @@ reg = <0x58001000 0x1000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "dss_dispc"; - clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>; clock-names = "fck"; /* CTRL_CORE_SMA_SW_1 */ syscon-pol = <&scm_conf 0x534>; @@ -1948,104 +644,14 @@ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; ti,hwmods = "dss_hdmi"; - clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>, - <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; dmas = <&sdma_xbar 76>; dma-names = "audio_tx"; }; }; - epwmss0: epwmss@4843e000 { - compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; - reg = <0x4843e000 0x30>; - ti,hwmods = "epwmss0"; - #address-cells = <1>; - #size-cells = <1>; - status = "disabled"; - ranges; - - ehrpwm0: pwm@4843e200 { - compatible = "ti,dra746-ehrpwm", - "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x4843e200 0x80>; - clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - ecap0: ecap@4843e100 { - compatible = "ti,dra746-ecap", - "ti,am3352-ecap"; - #pwm-cells = <3>; - reg = <0x4843e100 0x80>; - clocks = <&l4_root_clk_div>; - clock-names = "fck"; - status = "disabled"; - }; - }; - - epwmss1: epwmss@48440000 { - compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; - reg = <0x48440000 0x30>; - ti,hwmods = "epwmss1"; - #address-cells = <1>; - #size-cells = <1>; - status = "disabled"; - ranges; - - ehrpwm1: pwm@48440200 { - compatible = "ti,dra746-ehrpwm", - "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48440200 0x80>; - clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - ecap1: ecap@48440100 { - compatible = "ti,dra746-ecap", - "ti,am3352-ecap"; - #pwm-cells = <3>; - reg = <0x48440100 0x80>; - clocks = <&l4_root_clk_div>; - clock-names = "fck"; - status = "disabled"; - }; - }; - - epwmss2: epwmss@48442000 { - compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; - reg = <0x48442000 0x30>; - ti,hwmods = "epwmss2"; - #address-cells = <1>; - #size-cells = <1>; - status = "disabled"; - ranges; - - ehrpwm2: pwm@48442200 { - compatible = "ti,dra746-ehrpwm", - "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48442200 0x80>; - clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - ecap2: ecap@48442100 { - compatible = "ti,dra746-ecap", - "ti,am3352-ecap"; - #pwm-cells = <3>; - reg = <0x48442100 0x80>; - clocks = <&l4_root_clk_div>; - clock-names = "fck"; - status = "disabled"; - }; - }; - aes1: aes@4b500000 { compatible = "ti,omap4-aes"; ti,hwmods = "aes1"; @@ -2090,15 +696,6 @@ clock-names = "fck"; }; - rng: rng@48090000 { - compatible = "ti,omap4-rng"; - ti,hwmods = "rng"; - reg = <0x48090000 0x2000>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&l3_iclk_div>; - clock-names = "fck"; - }; - opp_supply_mpu: opp-supply@4a003b20 { compatible = "ti,omap5-opp-supply"; reg = <0x4a003b20 0xc>; @@ -2148,8 +745,6 @@ temperature = <120000>; /* milli Celsius */ }; -#include "dra7xx-clocks.dtsi" - &core_crit { temperature = <120000>; /* milli Celsius */ }; @@ -2165,3 +760,6 @@ &iva_crit { temperature = <120000>; /* milli Celsius */ }; + +#include "dra7-l4.dtsi" +#include "dra7xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index e297b923b71a..be65f3bc59d1 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -530,7 +530,7 @@ &atl { assigned-clocks = <&abe_dpll_sys_clk_mux>, - <&atl_clkctrl DRA7_ATL_CLKCTRL 26>, + <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>, <&dpll_abe_ck>, <&dpll_abe_m2x2_ck>, <&atl_clkin2_ck>; @@ -548,7 +548,7 @@ &mcasp3 { #sound-dai-cells = <0>; - assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>; + assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; assigned-clock-parents = <&atl_clkin2_ck>; status = "okay"; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index c011d2e64fef..89831552cd86 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -25,8 +25,8 @@ <0x58004300 0x20>; reg-names = "dss", "pll1_clkctrl", "pll1"; - clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>, - <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 12>; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>; clock-names = "fck", "video1_clk"; }; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 8f9df09155d8..8294a607fec8 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -103,9 +103,9 @@ reg-names = "dss", "pll1_clkctrl", "pll1", "pll2_clkctrl", "pll2"; - clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>, - <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 12>, - <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 13>; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 13>; clock-names = "fck", "video1_clk", "video2_clk"; }; diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi index 613e4dc0ed3e..9ee45aa365d8 100644 --- a/arch/arm/boot/dts/dra76x.dtsi +++ b/arch/arm/boot/dts/dra76x.dtsi @@ -24,7 +24,7 @@ ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET | SYSC_DRA7_MCAN_ENAWAKEUP)>; ti,syss-mask = <1>; - clocks = <&wkupaon_clkctrl DRA7_ADC_CLKCTRL 0>; + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_ADC_CLKCTRL 0>; clock-names = "fck"; m_can0: mcan@1a00 { diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 69562cdbeada..bb52c6f0e90e 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -11,25 +11,25 @@ atl_clkin0_ck: atl_clkin0_ck { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; - clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>; + clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; atl_clkin1_ck: atl_clkin1_ck { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; - clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>; + clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; atl_clkin2_ck: atl_clkin2_ck { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; - clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>; + clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; atl_clkin3_ck: atl_clkin3_ck { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; - clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>; + clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; hdmi_clkin_ck: hdmi_clkin_ck { @@ -1526,44 +1526,82 @@ }; &cm_core_aon { - mpu_cm: mpu_cm@300 { + mpu_cm: mpu-cm@300 { compatible = "ti,omap4-cm"; reg = <0x300 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x300 0x100>; - mpu_clkctrl: clk@20 { + mpu_clkctrl: mpu-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; + + }; + + dsp1_cm: dsp1-cm@400 { + compatible = "ti,omap4-cm"; + reg = <0x400 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x400 0x100>; + + dsp1_clkctrl: dsp1-clkctrl@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; - ipu_cm: ipu_cm@500 { + ipu_cm: ipu-cm@500 { compatible = "ti,omap4-cm"; reg = <0x500 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x500 0x100>; - ipu_clkctrl: clk@40 { + ipu1_clkctrl: ipu1-clkctrl@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + + ipu_clkctrl: ipu-clkctrl@50 { + compatible = "ti,clkctrl"; + reg = <0x50 0x34>; + #clock-cells = <2>; + }; + + }; + + dsp2_cm: dsp2-cm@600 { + compatible = "ti,omap4-cm"; + reg = <0x600 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x600 0x100>; + + dsp2_clkctrl: dsp2-clkctrl@20 { compatible = "ti,clkctrl"; - reg = <0x40 0x44>; + reg = <0x20 0x4>; #clock-cells = <2>; }; + }; - rtc_cm: rtc_cm@700 { + rtc_cm: rtc-cm@700 { compatible = "ti,omap4-cm"; reg = <0x700 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x700 0x100>; - rtc_clkctrl: clk@40 { + rtc_clkctrl: rtc-clkctrl@20 { compatible = "ti,clkctrl"; - reg = <0x40 0x8>; + reg = <0x20 0x28>; #clock-cells = <2>; }; }; @@ -1571,160 +1609,207 @@ }; &cm_core { - coreaon_cm: coreaon_cm@600 { + coreaon_cm: coreaon-cm@600 { compatible = "ti,omap4-cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x600 0x100>; - coreaon_clkctrl: clk@20 { + coreaon_clkctrl: coreaon-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x1c>; #clock-cells = <2>; }; }; - l3main1_cm: l3main1_cm@700 { + l3main1_cm: l3main1-cm@700 { compatible = "ti,omap4-cm"; reg = <0x700 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x700 0x100>; - l3main1_clkctrl: clk@20 { + l3main1_clkctrl: l3main1-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x74>; #clock-cells = <2>; }; + + }; + + ipu2_cm: ipu2-cm@900 { + compatible = "ti,omap4-cm"; + reg = <0x900 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x900 0x100>; + + ipu2_clkctrl: ipu2-clkctrl@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; - dma_cm: dma_cm@a00 { + dma_cm: dma-cm@a00 { compatible = "ti,omap4-cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xa00 0x100>; - dma_clkctrl: clk@20 { + dma_clkctrl: dma-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - emif_cm: emif_cm@b00 { + emif_cm: emif-cm@b00 { compatible = "ti,omap4-cm"; reg = <0xb00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xb00 0x100>; - emif_clkctrl: clk@20 { + emif_clkctrl: emif-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - atl_cm: atl_cm@c00 { + atl_cm: atl-cm@c00 { compatible = "ti,omap4-cm"; reg = <0xc00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xc00 0x100>; - atl_clkctrl: clk@0 { + atl_clkctrl: atl-clkctrl@0 { compatible = "ti,clkctrl"; reg = <0x0 0x4>; #clock-cells = <2>; }; }; - l4cfg_cm: l4cfg_cm@d00 { + l4cfg_cm: l4cfg-cm@d00 { compatible = "ti,omap4-cm"; reg = <0xd00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xd00 0x100>; - l4cfg_clkctrl: clk@20 { + l4cfg_clkctrl: l4cfg-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x84>; #clock-cells = <2>; }; }; - l3instr_cm: l3instr_cm@e00 { + l3instr_cm: l3instr-cm@e00 { compatible = "ti,omap4-cm"; reg = <0xe00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xe00 0x100>; - l3instr_clkctrl: clk@20 { + l3instr_clkctrl: l3instr-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; }; - dss_cm: dss_cm@1100 { + dss_cm: dss-cm@1100 { compatible = "ti,omap4-cm"; reg = <0x1100 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1100 0x100>; - dss_clkctrl: clk@20 { + dss_clkctrl: dss-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x14>; #clock-cells = <2>; }; }; - l3init_cm: l3init_cm@1300 { + l3init_cm: l3init-cm@1300 { compatible = "ti,omap4-cm"; reg = <0x1300 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1300 0x100>; - l3init_clkctrl: clk@20 { + l3init_clkctrl: l3init-clkctrl@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x6c>, <0xe0 0x14>; + #clock-cells = <2>; + }; + + pcie_clkctrl: pcie-clkctrl@b0 { + compatible = "ti,clkctrl"; + reg = <0xb0 0xc>; + #clock-cells = <2>; + }; + + gmac_clkctrl: gmac-clkctrl@d0 { compatible = "ti,clkctrl"; - reg = <0x20 0xd4>; + reg = <0xd0 0x4>; #clock-cells = <2>; }; + }; - l4per_cm: l4per_cm@1700 { + l4per_cm: l4per-cm@1700 { compatible = "ti,omap4-cm"; reg = <0x1700 0x300>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1700 0x300>; - l4per_clkctrl: clk@0 { + l4per_clkctrl: l4per-clkctrl@28 { compatible = "ti,clkctrl"; - reg = <0x0 0x20c>; + reg = <0x28 0x64>, <0xa0 0x24>, <0xf0 0x3c>, <0x140 0x1c>, <0x170 0x4>; #clock-cells = <2>; - assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>; + assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; assigned-clock-parents = <&abe_24m_fclk>; }; + + l4sec_clkctrl: l4sec-clkctrl@1a0 { + compatible = "ti,clkctrl"; + reg = <0x1a0 0x2c>; + #clock-cells = <2>; + }; + + l4per2_clkctrl: l4per2-clkctrl@c { + compatible = "ti,clkctrl"; + reg = <0xc 0x4>, <0x18 0xc>, <0x90 0xc>, <0xc4 0x4>, <0x138 0x4>, <0x160 0xc>, <0x178 0x24>, <0x1d0 0x3c>; + #clock-cells = <2>; + }; + + l4per3_clkctrl: l4per3-clkctrl@14 { + compatible = "ti,clkctrl"; + reg = <0x14 0x4>, <0xc8 0x14>, <0x130 0x4>; + #clock-cells = <2>; + }; }; }; &prm { - wkupaon_cm: wkupaon_cm@1800 { + wkupaon_cm: wkupaon-cm@1800 { compatible = "ti,omap4-cm"; reg = <0x1800 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1800 0x100>; - wkupaon_clkctrl: clk@20 { + wkupaon_clkctrl: wkupaon-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x6c>; #clock-cells = <2>; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index 373ea8720769..67d86012a85c 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the EMEV2 SoC + * Device Tree Source for the Emma Mobile EV2 SoC * * Copyright (C) 2012 Renesas Solutions Corp. */ diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 7c22cbf6f3d4..ace50e194a45 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -36,11 +36,13 @@ cooling-maps { map0 { /* Corresponds to 500MHz */ - cooling-device = <&cpu0 5 5>; + cooling-device = <&cpu0 5 5>, + <&cpu1 5 5>; }; map1 { /* Corresponds to 200MHz */ - cooling-device = <&cpu0 8 8>; + cooling-device = <&cpu0 8 8>, + <&cpu1 8 8>; }; }; }; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 6ffedf4ed9f2..e25765500e99 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -121,11 +121,13 @@ cooling-maps { map0 { /* Correspond to 500MHz at freq_table */ - cooling-device = <&cpu0 5 5>; + cooling-device = <&cpu0 5 5>, + <&cpu1 5 5>; }; map1 { /* Correspond to 200MHz at freq_table */ - cooling-device = <&cpu0 8 8>; + cooling-device = <&cpu0 8 8>, + <&cpu1 8 8>; }; }; }; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 2a6b828c01b7..7479993755da 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -116,11 +116,13 @@ cooling-maps { map0 { /* Corresponds to 500MHz */ - cooling-device = <&cpu0 5 5>; + cooling-device = <&cpu0 5 5>, + <&cpu1 5 5>; }; map1 { /* Corresponds to 200MHz */ - cooling-device = <&cpu0 8 8>; + cooling-device = <&cpu0 8 8>, + <&cpu1 8 8>; }; }; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 27a1ee28c3bb..608d17454179 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -357,7 +357,7 @@ }; hsotg: hsotg@12480000 { - compatible = "snps,dwc2"; + compatible = "samsung,s3c6400-hsotg", "snps,dwc2"; reg = <0x12480000 0x20000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_USBOTG>; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index f9bbc6315cd9..8dbc47d627a5 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -138,11 +138,11 @@ cooling-maps { map0 { /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 2 2>; + cooling-device = <&cpu0 2 2>, <&cpu1 2 2>; }; map1 { /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 4 4>; + cooling-device = <&cpu0 4 4>, <&cpu1 4 4>; }; }; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index b6091c27f155..b491c345b2e8 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -51,7 +51,7 @@ #cooling-cells = <2>; /* min followed by max */ }; - cpu@901 { + cpu1: cpu@901 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x901>; @@ -298,6 +298,7 @@ opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1150000>; + opp-suspend; }; }; @@ -367,6 +368,7 @@ }; opp-200000000 { opp-hz = /bits/ 64 <200000000>; + opp-suspend; }; }; }; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index ab7affab7f1c..0038465f38f1 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -45,11 +45,15 @@ cooling-maps { map0 { /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 7 7>; + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; }; map1 { /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 13 13>; + cooling-device = <&cpu0 13 13>, + <&cpu1 13 13>, + <&cpu2 13 13>, + <&cpu3 13 13>; }; }; }; @@ -446,6 +450,7 @@ }; s5m8767_osc: clocks { + compatible = "samsung,s5m8767-clk"; #clock-cells = <1>; clock-output-names = "s5m8767_ap", "s5m8767_cp", "s5m8767_bt"; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index aed2f2e2b0d1..4c15cb616cdf 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -267,11 +267,15 @@ cooling-maps { map0 { /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 7 7>; + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; }; map1 { /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 13 13>; + cooling-device = <&cpu0 13 13>, + <&cpu1 13 13>, + <&cpu2 13 13>, + <&cpu3 13 13>; }; }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 2caa3132f34e..3a9eb1e91c45 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -72,11 +72,15 @@ cooling-maps { cooling_map0: map0 { /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 7 7>; + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; }; cooling_map1: map1 { /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 13 13>; + cooling-device = <&cpu0 13 13>, + <&cpu1 13 13>, + <&cpu2 13 13>, + <&cpu3 13 13>; }; }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 459919b65df8..2bdf899df436 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -45,24 +45,22 @@ cooling-maps { map0 { trip = <&cpu_alert1>; - cooling-device = <&cpu0 9 9>; + cooling-device = <&cpu0 9 9>, <&cpu1 9 9>, + <&cpu2 9 9>, <&cpu3 9 9>, + <&fan0 1 2>; }; map1 { trip = <&cpu_alert2>; - cooling-device = <&cpu0 15 15>; + cooling-device = <&cpu0 15 15>, + <&cpu1 15 15>, + <&cpu2 15 15>, + <&cpu3 15 15>, + <&fan0 2 3>; }; map2 { trip = <&cpu_alert0>; cooling-device = <&fan0 0 1>; }; - map3 { - trip = <&cpu_alert1>; - cooling-device = <&fan0 1 2>; - }; - map4 { - trip = <&cpu_alert2>; - cooling-device = <&fan0 2 3>; - }; }; }; }; diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi index 8e7a7fb98124..d83fbd4e434c 100644 --- a/arch/arm/boot/dts/exynos4412-prime.dtsi +++ b/arch/arm/boot/dts/exynos4412-prime.dtsi @@ -30,9 +30,11 @@ }; &cooling_map0 { - cooling-device = <&cpu0 9 9>; + cooling-device = <&cpu0 9 9>, <&cpu1 9 9>, + <&cpu2 9 9>, <&cpu3 9 9>; }; &cooling_map1 { - cooling-device = <&cpu0 15 15>; + cooling-device = <&cpu0 15 15>, <&cpu1 15 15>, + <&cpu2 15 15>, <&cpu3 15 15>; }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 51f72f0327e5..26ad6ab3c6af 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -45,7 +45,7 @@ #cooling-cells = <2>; /* min followed by max */ }; - cpu@a01 { + cpu1: cpu@a01 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA01>; @@ -55,7 +55,7 @@ #cooling-cells = <2>; /* min followed by max */ }; - cpu@a02 { + cpu2: cpu@a02 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA02>; @@ -65,7 +65,7 @@ #cooling-cells = <2>; /* min followed by max */ }; - cpu@a03 { + cpu3: cpu@a03 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA03>; @@ -432,6 +432,7 @@ opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1050000>; + opp-suspend; }; }; @@ -520,6 +521,7 @@ opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <1000000>; + opp-suspend; }; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 7d1f2dc59038..2ca9319f48f2 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -10,6 +10,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/clock/samsung,s2mps11.h> #include "exynos5250.dtsi" / { @@ -180,31 +181,6 @@ }; }; -&dp { - status = "okay"; - samsung,color-space = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <4>; - - display-timings { - native-mode = <&timing0>; - - timing0: timing { - /* 2560x1600 DP panel */ - clock-frequency = <50000>; - hactive = <2560>; - vactive = <1600>; - hfront-porch = <48>; - hback-porch = <80>; - hsync-len = <32>; - vback-porch = <16>; - vfront-porch = <8>; - vsync-len = <6>; - }; - }; -}; - &fimd { status = "okay"; }; @@ -264,6 +240,12 @@ <&gpx2 4 GPIO_ACTIVE_HIGH>, <&gpx2 5 GPIO_ACTIVE_HIGH>; + s5m8767_osc: clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "s5m8767_ap", "unused1", "unused2"; + }; + regulators { ldo1_reg: LDO1 { regulator-name = "VDD_ALIVE_1.0V"; @@ -601,6 +583,8 @@ }; &rtc { + clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 5044f754e6e5..80986b97dfe5 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -59,7 +59,7 @@ operating-points-v2 = <&cpu0_opp_table>; #cooling-cells = <2>; /* min followed by max */ }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <1>; @@ -1087,11 +1087,12 @@ cooling-maps { map0 { /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 9 9>; + cooling-device = <&cpu0 9 9>, <&cpu1 9 9>; }; map1 { /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 15 15>; + cooling-device = <&cpu0 15 15>, + <&cpu1 15 15>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index cdda614e417e..3447160e1fbf 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -89,6 +89,7 @@ pinctrl-0 = <&s2mps11_irq>; s2mps11_osc: clocks { + compatible = "samsung,s2mps11-clk"; #clock-cells = <1>; clock-output-names = "s2mps11_ap", "s2mps11_cp", "s2mps11_bt"; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index dda8ca2d2324..b82af7c89654 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -289,6 +289,13 @@ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; }; + + sd2_wp: sd2-wp { + samsung,pins = "gpc4-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; }; &pinctrl_2 { diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 831c7336f237..3cf905047893 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -141,6 +141,7 @@ reg = <0x66>; s2mps11_osc: clocks { + compatible = "samsung,s2mps11-clk"; #clock-cells = <1>; clock-output-names = "s2mps11_ap", "s2mps11_cp", "s2mps11_bt"; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 2fac4baf1eb4..bf09eab90f8a 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Hardkernel Odroid XU3/XU4/HC1 boards core device tree source + * Hardkernel Odroid XU3/XU3-Lite/XU4/HC1 boards core device tree source * * Copyright (c) 2017 Marek Szyprowski * Copyright (c) 2013-2017 Samsung Electronics Co., Ltd. @@ -141,6 +141,7 @@ pinctrl-0 = <&s2mps11_irq>; s2mps11_osc: clocks { + compatible = "samsung,s2mps11-clk"; #clock-cells = <1>; clock-output-names = "s2mps11_ap", "s2mps11_cp", "s2mps11_bt"; @@ -231,7 +232,7 @@ ldo13_reg: LDO13 { regulator-name = "vddq_mmc2"; - regulator-min-microvolt = <2800000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; }; @@ -498,11 +499,15 @@ samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_wp &sd2_bus1 &sd2_bus4>; bus-width = <4>; cap-sd-highspeed; + max-frequency = <200000000>; vmmc-supply = <&ldo19_reg>; vqmmc-supply = <&ldo13_reg>; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; }; &nocp_mem0_0 { diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts index 8f332be143f7..d271e7548826 100644 --- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts +++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts @@ -56,24 +56,30 @@ */ map0 { trip = <&cpu0_alert0>; - cooling-device = <&cpu0 0 2>; - }; - map1 { - trip = <&cpu0_alert0>; - cooling-device = <&cpu4 0 2>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; }; /* * When reaching cpu0_alert1, reduce CPU * further, down to 600 MHz (12 steps for big, * 7 steps for LITTLE). */ - map2 { - trip = <&cpu0_alert1>; - cooling-device = <&cpu0 3 7>; - }; - map3 { + map1 { trip = <&cpu0_alert1>; - cooling-device = <&cpu4 3 12>; + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; }; }; }; @@ -99,19 +105,25 @@ cooling-maps { map0 { trip = <&cpu1_alert0>; - cooling-device = <&cpu0 0 2>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; }; map1 { - trip = <&cpu1_alert0>; - cooling-device = <&cpu4 0 2>; - }; - map2 { - trip = <&cpu1_alert1>; - cooling-device = <&cpu0 3 7>; - }; - map3 { trip = <&cpu1_alert1>; - cooling-device = <&cpu4 3 12>; + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; }; }; }; @@ -137,19 +149,25 @@ cooling-maps { map0 { trip = <&cpu2_alert0>; - cooling-device = <&cpu0 0 2>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; }; map1 { - trip = <&cpu2_alert0>; - cooling-device = <&cpu4 0 2>; - }; - map2 { - trip = <&cpu2_alert1>; - cooling-device = <&cpu0 3 7>; - }; - map3 { trip = <&cpu2_alert1>; - cooling-device = <&cpu4 3 12>; + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; }; }; }; @@ -175,19 +193,25 @@ cooling-maps { map0 { trip = <&cpu3_alert0>; - cooling-device = <&cpu0 0 2>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; }; map1 { - trip = <&cpu3_alert0>; - cooling-device = <&cpu4 0 2>; - }; - map2 { - trip = <&cpu3_alert1>; - cooling-device = <&cpu0 3 7>; - }; - map3 { trip = <&cpu3_alert1>; - cooling-device = <&cpu4 3 12>; + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi index 03611d50c5a9..e84544b220b9 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -26,8 +26,7 @@ "Speakers", "SPKL", "Speakers", "SPKR"; - assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>, - <&clock CLK_MOUT_EPLL>, + assigned-clocks = <&clock CLK_MOUT_EPLL>, <&clock CLK_MOUT_MAU_EPLL>, <&clock CLK_MOUT_USER_MAU_EPLL>, <&clock_audss EXYNOS_MOUT_AUDSS>, @@ -36,8 +35,7 @@ <&clock_audss EXYNOS_DOUT_AUD_BUS>, <&clock_audss EXYNOS_DOUT_I2S>; - assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>, - <&clock CLK_FOUT_EPLL>, + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, <&clock CLK_MOUT_EPLL>, <&clock CLK_MOUT_MAU_EPLL>, <&clock CLK_MAU_EPLL>, @@ -48,7 +46,6 @@ <0>, <0>, <0>, - <0>, <196608001>, <(196608002 / 2)>, <196608000>; @@ -84,4 +81,6 @@ &i2s0 { status = "okay"; + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; + assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index e522edb2bb82..b299e541cac0 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Hardkernel Odroid XU3 board device tree source + * Hardkernel Odroid XU3/XU3-Lite/XU4 boards common device tree source * * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -113,24 +113,30 @@ */ map3 { trip = <&cpu0_alert3>; - cooling-device = <&cpu0 0 2>; - }; - map4 { - trip = <&cpu0_alert3>; - cooling-device = <&cpu4 0 2>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; }; /* * When reaching cpu0_alert4, reduce CPU * further, down to 600 MHz (12 steps for big, * 7 steps for LITTLE). */ - map5 { - trip = <&cpu0_alert4>; - cooling-device = <&cpu0 3 7>; - }; - map6 { + map4 { trip = <&cpu0_alert4>; - cooling-device = <&cpu4 3 12>; + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; }; }; }; @@ -185,19 +191,25 @@ }; map3 { trip = <&cpu1_alert3>; - cooling-device = <&cpu0 0 2>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; }; map4 { - trip = <&cpu1_alert3>; - cooling-device = <&cpu4 0 2>; - }; - map5 { - trip = <&cpu1_alert4>; - cooling-device = <&cpu0 3 7>; - }; - map6 { trip = <&cpu1_alert4>; - cooling-device = <&cpu4 3 12>; + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; }; }; }; @@ -252,19 +264,25 @@ }; map3 { trip = <&cpu2_alert3>; - cooling-device = <&cpu0 0 2>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; }; map4 { - trip = <&cpu2_alert3>; - cooling-device = <&cpu4 0 2>; - }; - map5 { - trip = <&cpu2_alert4>; - cooling-device = <&cpu0 3 7>; - }; - map6 { trip = <&cpu2_alert4>; - cooling-device = <&cpu4 3 12>; + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; }; }; }; @@ -319,19 +337,25 @@ }; map3 { trip = <&cpu3_alert3>; - cooling-device = <&cpu0 0 2>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; }; map4 { - trip = <&cpu3_alert3>; - cooling-device = <&cpu4 0 2>; - }; - map5 { - trip = <&cpu3_alert4>; - cooling-device = <&cpu0 3 7>; - }; - map6 { trip = <&cpu3_alert4>; - cooling-device = <&cpu4 3 12>; + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; }; }; }; @@ -392,6 +416,7 @@ cap-mmc-highspeed; mmc-hs200-1_8v; mmc-hs400-1_8v; + max-frequency = <200000000>; vmmc-supply = <&ldo18_reg>; vqmmc-supply = <&ldo3_reg>; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts index 4a30cc849b00..122174ea9e0a 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts @@ -33,8 +33,7 @@ compatible = "samsung,odroid-xu3-audio"; model = "Odroid-XU4"; - assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>, - <&clock CLK_MOUT_EPLL>, + assigned-clocks = <&clock CLK_MOUT_EPLL>, <&clock CLK_MOUT_MAU_EPLL>, <&clock CLK_MOUT_USER_MAU_EPLL>, <&clock_audss EXYNOS_MOUT_AUDSS>, @@ -43,8 +42,7 @@ <&clock_audss EXYNOS_DOUT_AUD_BUS>, <&clock_audss EXYNOS_DOUT_I2S>; - assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>, - <&clock CLK_FOUT_EPLL>, + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, <&clock CLK_MOUT_EPLL>, <&clock CLK_MOUT_MAU_EPLL>, <&clock CLK_MAU_EPLL>, @@ -55,7 +53,6 @@ <0>, <0>, <0>, - <0>, <196608001>, <(196608002 / 2)>, <196608000>; @@ -79,6 +76,8 @@ &i2s0 { status = "okay"; + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; + assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>; }; &pwm { diff --git a/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi b/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi new file mode 100644 index 000000000000..87bb8b576250 --- /dev/null +++ b/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2018 Facebook Inc. + +partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + u-boot@0 { + reg = <0x0 0x60000>; + label = "u-boot"; + }; + + u-boot-env@60000 { + reg = <0x60000 0x20000>; + label = "env"; + }; + + fit@80000 { + reg = <0x80000 0x1b80000>; + label = "fit"; + }; + + /* + * "data0" partition is used by several Facebook BMC platforms + * as persistent data store. + */ + data0@1c00000 { + reg = <0x1c00000 0x400000>; + label = "data0"; + }; + + /* + * Although the master partition can be created by enabling + * MTD_PARTITIONED_MASTER option, below "flash0" partition is + * explicitly created to avoid breaking legacy applications. + */ + flash0@0 { + reg = <0x0 0x2000000>; + label = "flash0"; + }; +}; diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts index 6f258b50eb44..cc0c3cf89eaa 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -28,7 +28,7 @@ compatible = "gpio-keys"; button-esc { - debounce-interval = <50>; + debounce-interval = <100>; wakeup-source; linux,code = <KEY_ESC>; label = "reset"; @@ -36,7 +36,7 @@ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; button-eject { - debounce-interval = <50>; + debounce-interval = <100>; wakeup-source; linux,code = <KEY_EJECTCD>; label = "unmount"; @@ -64,7 +64,6 @@ gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>; gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>; - /* Collides with pflash CE1, not so cool */ cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; @@ -253,15 +252,18 @@ soc { flash@30000000 { /* - * Flash access is by default disabled, because it - * collides with the Chip Enable signal for the display - * panel, that reuse the parallel flash Chip Select 1 - * (CS1). Enabling flash makes graphics stop working. - * - * We might be able to hack around this by letting - * GPIO poke around in the flash controller registers. + * Flash access collides with the Chip Enable signal for + * the display panel, that reuse the parallel flash Chip + * Select 1 (CS1). We switch the pin control state so we + * enable these pins for flash access only when we need + * then, and when disabled they can be used for GPIO which + * is what the display panel needs. */ - /* status = "okay"; */ + status = "okay"; + pinctrl-names = "enabled", "disabled"; + pinctrl-0 = <&pflash_default_pins>; + pinctrl-1 = <&pflash_disabled_pins>; + /* 32MB of flash */ reg = <0x30000000 0x02000000>; @@ -274,20 +276,16 @@ read-only; }; /* - * Between the boot loader and the rootfs is the kernel - * in a custom Storlink format flashed from the boot - * menu. The rootfs is in squashfs format. + * This firmware image contains the kernel catenated + * with the squashfs root filesystem. For some reason + * this is called "upgrade" on the vendor system. */ - partition@1800c0 { - label = "rootfs"; - reg = <0x001800c0 0x01dbff40>; - read-only; - }; - partition@1f40000 { + partition@40000 { label = "upgrade"; - reg = <0x01f40000 0x00040000>; + reg = <0x00040000 0x01f40000>; read-only; }; + /* RGDB, Residental Gateway Database? */ partition@1f80000 { label = "rgdb"; reg = <0x01f80000 0x00040000>; @@ -331,7 +329,6 @@ "gpio0cgrp", "gpio0egrp", "gpio0fgrp", - "gpio0ggrp", "gpio0hgrp"; }; }; @@ -346,6 +343,18 @@ groups = "gpio1bgrp"; }; }; + /* + * These GPIO groups will be mapped in over some + * of the flash pins when the flash is not in + * active use. + */ + pflash_disabled_pins: pinctrl-pflash-disabled { + mux { + function = "gpio0"; + groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp", + "gpio0kgrp"; + }; + }; pinctrl-gmii { mux { function = "gmii"; @@ -434,7 +443,7 @@ }; display-controller@6a000000 { - status = "okay"; + status = "disabled"; port@0 { reg = <0>; @@ -443,5 +452,13 @@ }; }; }; + + usb@68000000 { + status = "okay"; + }; + + usb@69000000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts index d1329322b968..b12504e10f0b 100644 --- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts +++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts @@ -34,7 +34,7 @@ compatible = "gpio-keys"; button-esc { - debounce-interval = <50>; + debounce-interval = <100>; wakeup-source; linux,code = <KEY_ESC>; label = "reset"; diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts index 963ea890c87f..f4535d635f3b 100644 --- a/arch/arm/boot/dts/gemini-nas4220b.dts +++ b/arch/arm/boot/dts/gemini-nas4220b.dts @@ -28,7 +28,7 @@ compatible = "gpio-keys"; button-setup { - debounce-interval = <50>; + debounce-interval = <100>; wakeup-source; linux,code = <KEY_SETUP>; label = "Backup button"; @@ -36,7 +36,7 @@ gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; }; button-restart { - debounce-interval = <50>; + debounce-interval = <100>; wakeup-source; linux,code = <KEY_RESTART>; label = "Softreset button"; @@ -204,5 +204,13 @@ ata@63400000 { status = "okay"; }; + + usb@68000000 { + status = "okay"; + }; + + usb@69000000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts index eb4f0bf074da..9611ddf06792 100644 --- a/arch/arm/boot/dts/gemini-rut1xx.dts +++ b/arch/arm/boot/dts/gemini-rut1xx.dts @@ -28,7 +28,7 @@ compatible = "gpio-keys"; button-setup { - debounce-interval = <50>; + debounce-interval = <100>; wakeup-source; linux,code = <KEY_SETUP>; label = "Reset to defaults"; @@ -124,5 +124,25 @@ /* Not used in this platform */ }; }; + + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + /* Not used in this platform */ + }; + }; + + usb@68000000 { + status = "okay"; + }; + + usb@69000000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts index ebefb7297379..2bb953440793 100644 --- a/arch/arm/boot/dts/gemini-sl93512r.dts +++ b/arch/arm/boot/dts/gemini-sl93512r.dts @@ -324,5 +324,13 @@ ata@63400000 { status = "okay"; }; + + usb@68000000 { + status = "okay"; + }; + + usb@69000000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts index 3787cf3763c4..239dfacaae4d 100644 --- a/arch/arm/boot/dts/gemini-sq201.dts +++ b/arch/arm/boot/dts/gemini-sq201.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "console=ttyS0,115200n8"; + bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait"; stdout-path = &uart0; }; @@ -28,7 +28,7 @@ compatible = "gpio-keys"; button-setup { - debounce-interval = <50>; + debounce-interval = <100>; wakeup-source; linux,code = <KEY_SETUP>; label = "factory reset"; @@ -41,14 +41,12 @@ compatible = "gpio-leds"; led-green-info { label = "sq201:green:info"; - /* Conflict with parallel flash */ gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; default-state = "on"; linux,default-trigger = "heartbeat"; }; led-green-usb { label = "sq201:green:usb"; - /* Conflict with parallel and NAND flash */ gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "usb-host"; @@ -126,49 +124,17 @@ soc { flash@30000000 { - /* - * Flash access can be enabled, with the side effect - * of disabling access to GPIO LED on GPIO0[20] which - * reuse one of the parallel flash chip select lines. - * Also the default firmware on the machine has the - * problem that since it uses the flash, the two LEDS - * on the right become numb. - */ - /* status = "okay"; */ + status = "okay"; + pinctrl-names = "enabled", "disabled"; + pinctrl-0 = <&pflash_default_pins>; + pinctrl-1 = <&pflash_disabled_pins>; /* 16MB of flash */ reg = <0x30000000 0x01000000>; - partition@0 { - label = "RedBoot"; - reg = <0x00000000 0x00120000>; - read-only; - }; - partition@120000 { - label = "Kernel"; - reg = <0x00120000 0x00200000>; - }; - partition@320000 { - label = "Ramdisk"; - reg = <0x00320000 0x00600000>; - }; - partition@920000 { - label = "Application"; - reg = <0x00920000 0x00600000>; - }; - partition@f20000 { - label = "VCTL"; - reg = <0x00f20000 0x00020000>; - read-only; - }; - partition@f40000 { - label = "CurConf"; - reg = <0x00f40000 0x000a0000>; - read-only; - }; - partition@fe0000 { - label = "FIS directory"; - reg = <0x00fe0000 0x00020000>; - read-only; + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0xfe0000 */ + fis-index-block = <0x1fc>; }; }; @@ -184,9 +150,7 @@ mux { function = "gpio0"; groups = "gpio0fgrp", - "gpio0ggrp", - "gpio0hgrp", - "gpio0kgrp"; + "gpio0hgrp"; }; }; /* @@ -199,6 +163,18 @@ groups = "gpio1dgrp"; }; }; + /* + * These GPIO groups will be mapped in over some + * of the flash pins when the flash is not in + * active use. + */ + pflash_disabled_pins: pinctrl-pflash-disabled { + mux { + function = "gpio0"; + groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp", + "gpio0kgrp"; + }; + }; pinctrl-gmii { mux { function = "gmii"; @@ -316,5 +292,13 @@ ata@63000000 { status = "okay"; }; + + usb@68000000 { + status = "okay"; + }; + + usb@69000000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts index 29af86cd10f7..3a2761dd460f 100644 --- a/arch/arm/boot/dts/gemini-wbd111.dts +++ b/arch/arm/boot/dts/gemini-wbd111.dts @@ -29,7 +29,7 @@ compatible = "gpio-keys"; button-setup { - debounce-interval = <50>; + debounce-interval = <100>; wakeup-source; linux,code = <KEY_SETUP>; label = "reset"; @@ -171,5 +171,13 @@ /* Not used in this platform */ }; }; + + usb@68000000 { + status = "okay"; + }; + + usb@69000000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts index 24e6ae3616f7..52b4dbc0c072 100644 --- a/arch/arm/boot/dts/gemini-wbd222.dts +++ b/arch/arm/boot/dts/gemini-wbd222.dts @@ -28,7 +28,7 @@ compatible = "gpio-keys"; button-setup { - debounce-interval = <50>; + debounce-interval = <100>; wakeup-source; linux,code = <KEY_SETUP>; label = "reset"; @@ -183,5 +183,13 @@ phy-handle = <&phy1>; }; }; + + usb@68000000 { + status = "okay"; + }; + + usb@69000000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index eb752e9495de..8cf67b11751f 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -409,5 +409,37 @@ #size-cells = <0>; status = "disabled"; }; + + usb@68000000 { + compatible = "cortina,gemini-usb", "faraday,fotg210"; + reg = <0x68000000 0x1000>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon GEMINI_RESET_USB0>; + clocks = <&syscon GEMINI_CLK_GATE_USB0>; + clock-names = "PCLK"; + /* + * This will claim pins for USB0 and USB1 at the same + * time as they are using some common pins. If you for + * some reason have a system using USB1 at 96000000 but + * NOT using USB0 at 68000000 you wll have to add the + * usb_default_pins to the USB controller at 96000000 + * in your .dts for the board. + */ + pinctrl-names = "default"; + pinctrl-0 = <&usb_default_pins>; + syscon = <&syscon>; + status = "disabled"; + }; + + usb@69000000 { + compatible = "cortina,gemini-usb", "faraday,fotg210"; + reg = <0x69000000 0x1000>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon GEMINI_RESET_USB1>; + clocks = <&syscon GEMINI_CLK_GATE_USB1>; + clock-names = "PCLK"; + syscon = <&syscon>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts index a1d81badb5c8..119b19ba53b6 100644 --- a/arch/arm/boot/dts/imx1-ads.dts +++ b/arch/arm/boot/dts/imx1-ads.dts @@ -21,6 +21,7 @@ }; memory@8000000 { + device_type = "memory"; reg = <0x08000000 0x04000000>; }; }; diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/imx1-apf9328.dts index 11515c0cb195..ee4b1b106b1a 100644 --- a/arch/arm/boot/dts/imx1-apf9328.dts +++ b/arch/arm/boot/dts/imx1-apf9328.dts @@ -21,6 +21,7 @@ }; memory@8000000 { + device_type = "memory"; reg = <0x08000000 0x00800000>; }; }; diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi index b00ece16b853..b30448cde582 100644 --- a/arch/arm/boot/dts/imx1.dtsi +++ b/arch/arm/boot/dts/imx1.dtsi @@ -15,10 +15,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { gpio0 = &gpio1; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 98efe1aeb26a..0b2701ca2921 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -10,6 +10,7 @@ compatible = "fsl,imx23-evk", "fsl,imx23"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 31b1e3581ac0..e2bac4d8f507 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -20,6 +20,7 @@ compatible = "olimex,imx23-olinuxino", "fsl,imx23"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts index faf701b2adb2..46057d9bf555 100644 --- a/arch/arm/boot/dts/imx23-sansa.dts +++ b/arch/arm/boot/dts/imx23-sansa.dts @@ -50,6 +50,7 @@ compatible = "sandisk,sansa_fuze_plus", "fsl,imx23"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts index 2ff6cdf71a55..df2a9e6486a4 100644 --- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts +++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts @@ -17,6 +17,7 @@ compatible = "fsl,stmp378x-devb", "fsl,imx23"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts index db53089fb7fb..a6213c590f94 100644 --- a/arch/arm/boot/dts/imx23-xfi3.dts +++ b/arch/arm/boot/dts/imx23-xfi3.dts @@ -49,6 +49,7 @@ compatible = "creative,x-fi3", "fsl,imx23"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index ea259927eef6..8257630f7a49 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -13,10 +13,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { gpio0 = &gpio0; diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi index e316fe08837a..e4d7da267532 100644 --- a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi +++ b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi @@ -18,6 +18,7 @@ compatible = "eukrea,cpuimx25", "fsl,imx25"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x4000000>; /* 64M */ }; }; diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts index 5cb6967866c0..f37e9a75a3ca 100644 --- a/arch/arm/boot/dts/imx25-karo-tx25.dts +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -37,6 +37,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x02000000 0x90000000 0x02000000>; }; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index a5626b46ac4e..f8544a9e4633 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -12,6 +12,7 @@ compatible = "fsl,imx25-pdk", "fsl,imx25"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index b25309d26ea5..9a097ef014af 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -12,10 +12,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &fec; @@ -388,12 +386,16 @@ epit1: timer@53f94000 { compatible = "fsl,imx25-epit"; reg = <0x53f94000 0x4000>; + clocks = <&clks 83>, <&clks 43>; + clock-names = "ipg", "per"; interrupts = <28>; }; epit2: timer@53f98000 { compatible = "fsl,imx25-epit"; reg = <0x53f98000 0x4000>; + clocks = <&clks 84>, <&clks 43>; + clock-names = "ipg", "per"; interrupts = <27>; }; diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts index 3eddd805a793..f635d5c5029c 100644 --- a/arch/arm/boot/dts/imx27-apf27.dts +++ b/arch/arm/boot/dts/imx27-apf27.dts @@ -20,6 +20,7 @@ compatible = "armadeus,imx27-apf27", "fsl,imx27"; memory@a0000000 { + device_type = "memory"; reg = <0xa0000000 0x04000000>; }; }; diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi index 9c455dcbe6eb..c85f9d01768a 100644 --- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi +++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi @@ -17,6 +17,7 @@ compatible = "eukrea,cpuimx27", "fsl,imx27"; memory@a0000000 { + device_type = "memory"; reg = <0xa0000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index f9a882d99132..35123b7cb6b3 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -10,6 +10,7 @@ compatible = "fsl,imx27-pdk", "fsl,imx27"; memory@a0000000 { + device_type = "memory"; reg = <0xa0000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi index cbad7c88c58c..b0b4f7c00246 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi @@ -18,6 +18,7 @@ compatible = "phytec,imx27-pca100", "fsl,imx27"; memory@a0000000 { + device_type = "memory"; reg = <0xa0000000 0x08000000>; /* 128MB */ }; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index ec466b4bfd41..0935e1400e5d 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -17,6 +17,7 @@ compatible = "phytec,imx27-pcm038", "fsl,imx27"; memory@a0000000 { + device_type = "memory"; reg = <0xa0000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 151b0eb17dda..26ff5d419bfc 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -16,10 +16,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts index bab78346fa9f..b6976fbec983 100644 --- a/arch/arm/boot/dts/imx28-apf28.dts +++ b/arch/arm/boot/dts/imx28-apf28.dts @@ -17,6 +17,7 @@ compatible = "armadeus,imx28-apf28", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index 6c9b498305c0..3a184d13887b 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -7,6 +7,7 @@ compatible = "bluegiga,apx4devkit", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index 8337ca21e281..d3e3622979c5 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -17,6 +17,7 @@ compatible = "crystalfontz,cfa10036", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts index f4f2b3d16c8e..19957c2406e8 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-485.dts @@ -20,6 +20,7 @@ compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts index 71d0fcbc2d8c..498213137385 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts @@ -21,6 +21,7 @@ compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts index 6580ec6e26ba..d38d35b2a93d 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts @@ -24,6 +24,7 @@ }; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts index 693634edae99..38160fbd44b6 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2.dts @@ -20,6 +20,7 @@ compatible = "i2se,duckbill-2", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts index 16f524428ed7..7139c07ae19b 100644 --- a/arch/arm/boot/dts/imx28-duckbill.dts +++ b/arch/arm/boot/dts/imx28-duckbill.dts @@ -19,6 +19,7 @@ compatible = "i2se,duckbill", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts index b70f3349c350..28dab6d3a97c 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts @@ -24,6 +24,7 @@ compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x04000000>; }; }; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts index 65efb78ac040..7c3d55277312 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts @@ -23,6 +23,7 @@ compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; }; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 5778300f44e8..96c1d106bc64 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -10,6 +10,7 @@ compatible = "fsl,imx28-evk", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi index 0ec415e1ff58..298ad28caceb 100644 --- a/arch/arm/boot/dts/imx28-m28.dtsi +++ b/arch/arm/boot/dts/imx28-m28.dtsi @@ -16,6 +16,7 @@ compatible = "aries,m28", "denx,m28", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index 8883d36a51b5..ece33103a517 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -17,6 +17,7 @@ compatible = "msr,m28cu3", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 893886d17b2d..7d64301529c7 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -1,4 +1,5 @@ /* + * Copyright (C) 2012 Marek Vasut <marex@denx.de> * * The code contained herein is licensed under the GNU General Public diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts index ea9212f6ecda..42c88a67912b 100644 --- a/arch/arm/boot/dts/imx28-sps1.dts +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -17,6 +17,7 @@ compatible = "schulercontrol,imx28-sps1", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts index dccdd6bcd0b2..e3fd4112e642 100644 --- a/arch/arm/boot/dts/imx28-ts4600.dts +++ b/arch/arm/boot/dts/imx28-ts4600.dts @@ -20,6 +20,7 @@ compatible = "technologic,imx28-ts4600", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x10000000>; /* 256MB */ }; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index b8f46432e2a2..164254c28f8e 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -66,6 +66,7 @@ }; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0>; /* will be filled in by U-Boot */ }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 2b7efb659fc0..e14d8ef0158b 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -14,10 +14,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &mac0; diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts index 6ee4ff8e4e8f..9eb960cc02cc 100644 --- a/arch/arm/boot/dts/imx31-bug.dts +++ b/arch/arm/boot/dts/imx31-bug.dts @@ -17,6 +17,7 @@ compatible = "buglabs,imx31-bug", "fsl,imx31"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x8000000>; /* 128M */ }; }; diff --git a/arch/arm/boot/dts/imx31-lite.dts b/arch/arm/boot/dts/imx31-lite.dts index db52ddccabc3..d17abdfb6330 100644 --- a/arch/arm/boot/dts/imx31-lite.dts +++ b/arch/arm/boot/dts/imx31-lite.dts @@ -18,6 +18,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index af7afccf5f2f..d7f6fb764997 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -10,10 +10,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { gpio0 = &gpio1; diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi index ba39d938f289..5f8a47a9fcd4 100644 --- a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi +++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi @@ -18,6 +18,7 @@ compatible = "eukrea,cpuimx35", "fsl,imx35"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x8000000>; /* 128M */ }; }; diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts index df613e88fd2c..ddce0a844758 100644 --- a/arch/arm/boot/dts/imx35-pdk.dts +++ b/arch/arm/boot/dts/imx35-pdk.dts @@ -11,6 +11,7 @@ compatible = "fsl,imx35-pdk", "fsl,imx35"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x8000000>, <0x90000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index a1c3d28e8771..59cadeee23ed 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -13,10 +13,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index 682a99783ee6..a25da415cb02 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -12,6 +12,7 @@ compatible = "fsl,imx50-evk", "fsl,imx50"; memory@70000000 { + device_type = "memory"; reg = <0x70000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 95b7fba58300..ee1e3e8bf4ec 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -1,15 +1,8 @@ -/* - * Copyright 2013 Greg Ungerer <gerg@uclinux.org> - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2013 Greg Ungerer <gerg@uclinux.org> +// Copyright 2011 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. #include "imx50-pinfunc.h" #include <dt-bindings/gpio/gpio.h> @@ -22,10 +15,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts index 79d80036f74d..1eddf2908b3f 100644 --- a/arch/arm/boot/dts/imx51-apf51.dts +++ b/arch/arm/boot/dts/imx51-apf51.dts @@ -22,6 +22,7 @@ compatible = "armadeus,imx51-apf51", "fsl,imx51"; memory@90000000 { + device_type = "memory"; reg = <0x90000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 35ee1b4247c3..ed6a3ce874b2 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -15,6 +15,7 @@ }; memory@90000000 { + device_type = "memory"; reg = <0x90000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi index 5761a66e8a0d..82d8df097ef1 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi +++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi @@ -17,6 +17,7 @@ compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51"; memory@90000000 { + device_type = "memory"; reg = <0x90000000 0x08000000>; }; }; diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi index f8902a338e49..2e3125391bc4 100644 --- a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi +++ b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi @@ -23,6 +23,7 @@ compatible = "eukrea,cpuimx51", "fsl,imx51"; memory@90000000 { + device_type = "memory"; reg = <0x90000000 0x10000000>; /* 256M */ }; }; diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts index 39eb067904c3..4344632f7940 100644 --- a/arch/arm/boot/dts/imx51-ts4800.dts +++ b/arch/arm/boot/dts/imx51-ts4800.dts @@ -18,6 +18,7 @@ }; memory@90000000 { + device_type = "memory"; reg = <0x90000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index 69d753cac89a..a8220f08dcbf 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -53,6 +53,7 @@ /* Will be filled by the bootloader */ memory@90000000 { + device_type = "memory"; reg = <0x90000000 0>; }; @@ -477,6 +478,15 @@ }; &gpio1 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "hp-amp-shutdown-b", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; + unused-sd3-wp-gpio { /* * See pinctrl_esdhc1 below for more details on this @@ -495,9 +505,6 @@ hpa1: amp@60 { compatible = "ti,tpa6130a2"; reg = <0x60>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ampgpio>; - power-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; Vdd-supply = <®_3p3v>; }; @@ -671,7 +678,10 @@ }; &iomuxc { - pinctrl_ampgpio: ampgpiogrp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { fsl,pins = < MX51_PAD_GPIO1_9__GPIO1_9 0x5e >; diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts index 243d1c8cab0a..aa91e5dde4b8 100644 --- a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts +++ b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts @@ -18,6 +18,7 @@ /* Will be filled by the bootloader */ memory@90000000 { + device_type = "memory"; reg = <0x90000000 0>; }; diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts index 14b207778114..875b10a7d674 100644 --- a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts +++ b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts @@ -18,6 +18,7 @@ /* Will be filled by the bootloader */ memory@90000000 { + device_type = "memory"; reg = <0x90000000 0>; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 67d462715048..a5ee25cedc10 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -16,10 +16,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &fec; @@ -123,6 +121,16 @@ reg = <0x1ffe0000 0x20000>; }; + gpu: gpu@30000000 { + compatible = "amd,imageon-200.1", "amd,imageon"; + reg = <0x30000000 0x20000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <12>; + interrupt-names = "kgsl_3d0_irq"; + clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>; + clock-names = "core_clk", "mem_iface_clk"; + }; + ipu: ipu@40000000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 117bd002dd1d..7d5a48250f86 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -19,6 +19,7 @@ compatible = "fsl,imx53-ard", "fsl,imx53"; memory@70000000 { + device_type = "memory"; reg = <0x70000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts index cf70ebc4399a..c875e23ee45f 100644 --- a/arch/arm/boot/dts/imx53-cx9020.dts +++ b/arch/arm/boot/dts/imx53-cx9020.dts @@ -22,6 +22,7 @@ }; memory@70000000 { + device_type = "memory"; reg = <0x70000000 0x20000000>, <0xb0000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi index ce45f08e3051..db2e5bce9b6a 100644 --- a/arch/arm/boot/dts/imx53-m53.dtsi +++ b/arch/arm/boot/dts/imx53-m53.dtsi @@ -16,6 +16,7 @@ compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53"; memory@70000000 { + device_type = "memory"; reg = <0x70000000 0x20000000>, <0xb0000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 50dde84b72ed..f00dda334976 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -11,6 +11,7 @@ }; memory@70000000 { + device_type = "memory"; reg = <0x70000000 0x20000000>, <0xb0000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 462071c9ddd7..09071ca11c6c 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -12,6 +12,7 @@ compatible = "fsl,imx53-smd", "fsl,imx53"; memory@70000000 { + device_type = "memory"; reg = <0x70000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index a72b8981fc3b..c77d58f06c94 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -17,6 +17,7 @@ compatible = "tq,tqma53", "fsl,imx53"; memory@70000000 { + device_type = "memory"; reg = <0x70000000 0x40000000>; /* Up to 1GiB */ }; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 54cf3e67069a..4ab135906949 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -51,6 +51,7 @@ /* Will be filled by the bootloader */ memory@70000000 { + device_type = "memory"; reg = <0x70000000 0>; }; diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts index f6268d0ded29..ee6263d1c2d3 100644 --- a/arch/arm/boot/dts/imx53-usbarmory.dts +++ b/arch/arm/boot/dts/imx53-usbarmory.dts @@ -58,6 +58,7 @@ }; memory@70000000 { + device_type = "memory"; reg = <0x70000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi index f83a8c62ea53..d595034f3f1b 100644 --- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi +++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi @@ -17,12 +17,8 @@ memory@70000000 { device_type = "memory"; - reg = <0x70000000 0x20000000>; - }; - - memory@b0000000 { - device_type = "memory"; - reg = <0xb0000000 0x20000000>; + reg = <0x70000000 0x20000000>, + <0xb0000000 0x20000000>; }; regulators { diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 207eb557c90e..b3300300aabe 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -1,14 +1,7 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2011 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. #include "imx53-pinfunc.h" #include <dt-bindings/clock/imx5-clock.h> @@ -23,10 +16,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &fec; @@ -209,6 +200,16 @@ }; }; + gpu: gpu@30000000 { + compatible = "amd,imageon-200.0", "amd,imageon"; + reg = <0x30000000 0x20000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <12>; + interrupt-names = "kgsl_3d0_irq"; + clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>; + clock-names = "core_clk", "mem_iface_clk"; + }; + aips@50000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx6dl-apf6dev.dts b/arch/arm/boot/dts/imx6dl-apf6dev.dts index 4a7f86de6c39..6632e99fbb68 100644 --- a/arch/arm/boot/dts/imx6dl-apf6dev.dts +++ b/arch/arm/boot/dts/imx6dl-apf6dev.dts @@ -55,6 +55,7 @@ compatible = "armadeus,imx6dl-apf6dev", "armadeus,imx6dl-apf6", "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts index 29940ba215a8..b16603f27dce 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts @@ -49,6 +49,7 @@ compatible = "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts index 240f3661469f..abb2a1b9ce08 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts @@ -49,6 +49,7 @@ compatible = "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index ad7733662fe5..b87a85cd44ac 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -28,6 +28,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts index 64ed84e3c512..e71ad9062fd1 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts @@ -17,6 +17,7 @@ compatible = "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index d08e0402793b..d5f7a1703aae 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -55,6 +55,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; diff --git a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts index 89384cb618f6..588286adee67 100644 --- a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts +++ b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts @@ -23,6 +23,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-emcon-avari.dts b/arch/arm/boot/dts/imx6dl-emcon-avari.dts new file mode 100644 index 000000000000..407ad8d43c84 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-emcon-avari.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +// +// Copyright (C) 2018 emtrion GmbH +// + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-emcon.dtsi" +#include "imx6qdl-emcon-avari.dtsi" + +/ { + model = "emtrion SoM emCON-MX6 Solo/Dual-Lite Avari"; + compatible = "emtrion,emcon-mx6-avari", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts index df8607fe4142..385ce7b0029e 100644 --- a/arch/arm/boot/dts/imx6dl-mamoj.dts +++ b/arch/arm/boot/dts/imx6dl-mamoj.dts @@ -13,6 +13,12 @@ model = "BTicino i.MX6DL Mamoj board"; compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl"; + /* Will be filled by the bootloader */ + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0>; + }; + backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */ diff --git a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi index 7d9888937f12..d7e72993eaf8 100644 --- a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi @@ -17,6 +17,7 @@ compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts index 3fb7f4ee2496..853e58defa9c 100644 --- a/arch/arm/boot/dts/imx6dl-rex-basic.dts +++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts @@ -17,6 +17,7 @@ compatible = "rex,imx6dl-rex-basic", "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 8e51491e68cf..65c184bb8fb0 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -16,6 +16,7 @@ compatible = "riot,imx6s-riotboard", "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6dl-ts4900.dts b/arch/arm/boot/dts/imx6dl-ts4900.dts index cc01a7a22e30..3d60cc725d9e 100644 --- a/arch/arm/boot/dts/imx6dl-ts4900.dts +++ b/arch/arm/boot/dts/imx6dl-ts4900.dts @@ -49,6 +49,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-ts7970.dts b/arch/arm/boot/dts/imx6dl-ts7970.dts index 82435d5bf33f..5da6feba2e66 100644 --- a/arch/arm/boot/dts/imx6dl-ts7970.dts +++ b/arch/arm/boot/dts/imx6dl-ts7970.dts @@ -50,6 +50,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts index 738db4fc7702..c2946fbaa0dd 100644 --- a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts +++ b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts @@ -13,6 +13,7 @@ compatible = "wand,imx6dl-wandboard", "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts index 51de6b4bd7d8..6d1d863c2e3a 100644 --- a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts +++ b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts @@ -13,6 +13,7 @@ compatible = "wand,imx6dl-wandboard", "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts index b43454deaa1a..4a08d5a99452 100644 --- a/arch/arm/boot/dts/imx6dl-wandboard.dts +++ b/arch/arm/boot/dts/imx6dl-wandboard.dts @@ -13,6 +13,7 @@ compatible = "wand,imx6dl-wandboard", "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index f0607eb41df4..2ed10310a7b7 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -15,7 +15,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-apf6dev.dts b/arch/arm/boot/dts/imx6q-apf6dev.dts index 5e72f81cdf8b..07a36bb8075b 100644 --- a/arch/arm/boot/dts/imx6q-apf6dev.dts +++ b/arch/arm/boot/dts/imx6q-apf6dev.dts @@ -55,6 +55,7 @@ compatible = "armadeus,imx6q-apf6dev", "armadeus,imx6q-apf6", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 953a5b5a8ea4..baadcb7fe011 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -19,6 +19,7 @@ compatible = "fsl,imx6q-arm2", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts index 3ec58500e9c2..95b8f2d71821 100644 --- a/arch/arm/boot/dts/imx6q-b450v3.dts +++ b/arch/arm/boot/dts/imx6q-b450v3.dts @@ -98,13 +98,6 @@ line-name = "PCA9539-P04"; }; - P05 { - gpio-hog; - gpios = <5 0>; - output-low; - line-name = "PCA9539-P05"; - }; - P07 { gpio-hog; gpios = <7 0>; diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts index 5650a9b11091..611cb7ae7e55 100644 --- a/arch/arm/boot/dts/imx6q-b650v3.dts +++ b/arch/arm/boot/dts/imx6q-b650v3.dts @@ -91,13 +91,6 @@ }; &pca9539 { - P05 { - gpio-hog; - gpios = <5 0>; - output-low; - line-name = "PCA9539-P05"; - }; - P07 { gpio-hog; gpios = <7 0>; diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index 044a5bebe1c5..e4cb118f88c6 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -209,6 +209,22 @@ }; }; +&pca9539 { + P10 { + gpio-hog; + gpios = <8 0>; + output-low; + line-name = "PCA9539-P10"; + }; + + P11 { + gpio-hog; + gpios = <9 0>; + output-low; + line-name = "PCA9539-P11"; + }; +}; + &pci_root { /* PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch */ bridge@1,0 { diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index e903c488287b..adc9455e42c7 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -47,6 +47,7 @@ / { memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index d3cba09be0cb..fa27dcdf06f1 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -233,20 +233,6 @@ interrupt-parent = <&gpio2>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - P10 { - gpio-hog; - gpios = <8 0>; - output-low; - line-name = "PCA9539-P10"; - }; - - P11 { - gpio-hog; - gpios = <9 0>; - output-low; - line-name = "PCA9539-P11"; - }; - P12 { gpio-hog; gpios = <10 0>; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index 18ae4f3be6e3..cab9e92531c7 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -51,6 +51,7 @@ compatible = "compulab,cm-fx6", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts index ad12d76bbb89..e13acbbcdff4 100644 --- a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts +++ b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts @@ -23,6 +23,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; }; diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi index bbba0671f0f4..387801dde02e 100644 --- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi +++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi @@ -19,6 +19,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi index 85232c7c36a0..83524bb99eb3 100644 --- a/arch/arm/boot/dts/imx6q-display5.dtsi +++ b/arch/arm/boot/dts/imx6q-display5.dtsi @@ -48,6 +48,7 @@ compatible = "lwn,display5", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index b3c6a4a7897d..ee8c38eee03b 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -30,6 +30,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-emcon-avari.dts b/arch/arm/boot/dts/imx6q-emcon-avari.dts new file mode 100644 index 000000000000..0f582a9d4c0e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-emcon-avari.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +// +// Copyright (C) 2018 emtrion GmbH +// + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-emcon.dtsi" +#include "imx6qdl-emcon-avari.dtsi" + +/ { + model = "emtrion SoM emCON-MX6 Dual/Quad on Avari"; + compatible = "emtrion,emcon-mx6-avari", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts index fcd257bc5ac3..c63f371ede8b 100644 --- a/arch/arm/boot/dts/imx6q-evi.dts +++ b/arch/arm/boot/dts/imx6q-evi.dts @@ -51,6 +51,7 @@ compatible = "uniwest,imx6q-evi", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts index 84d3540b3a97..ccc2487d47ca 100644 --- a/arch/arm/boot/dts/imx6q-gk802.dts +++ b/arch/arm/boot/dts/imx6q-gk802.dts @@ -20,6 +20,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index a8f70b4266ef..4038170369fc 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -61,6 +61,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts index 714e09e04dcb..b8feadbff967 100644 --- a/arch/arm/boot/dts/imx6q-h100.dts +++ b/arch/arm/boot/dts/imx6q-h100.dts @@ -51,6 +51,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; diff --git a/arch/arm/boot/dts/imx6q-kp-tpc.dts b/arch/arm/boot/dts/imx6q-kp-tpc.dts index 302d8d06e4cc..50fbf46d17c2 100644 --- a/arch/arm/boot/dts/imx6q-kp-tpc.dts +++ b/arch/arm/boot/dts/imx6q-kp-tpc.dts @@ -13,6 +13,7 @@ compatible = "kiebackpeter,imx6q-tpc", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts index dd763f205819..d8ccb533b6b7 100644 --- a/arch/arm/boot/dts/imx6q-marsboard.dts +++ b/arch/arm/boot/dts/imx6q-marsboard.dts @@ -48,6 +48,7 @@ compatible = "embest,imx6q-marsboard", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts index b7e9f38cec72..74d9824e920b 100644 --- a/arch/arm/boot/dts/imx6q-mccmon6.dts +++ b/arch/arm/boot/dts/imx6q-mccmon6.dts @@ -20,6 +20,7 @@ compatible = "lwn,mccmon6", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index fcd824dc485b..61347a545d6c 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -57,6 +57,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi index fad858c30fe9..097f2c56c20b 100644 --- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi @@ -17,6 +17,7 @@ compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts index a31e83cd07a3..5edf858c8b86 100644 --- a/arch/arm/boot/dts/imx6q-pistachio.dts +++ b/arch/arm/boot/dts/imx6q-pistachio.dts @@ -57,6 +57,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts index d6cae73b1927..aa3004eab06c 100644 --- a/arch/arm/boot/dts/imx6q-rex-pro.dts +++ b/arch/arm/boot/dts/imx6q-rex-pro.dts @@ -17,6 +17,7 @@ compatible = "rex,imx6q-rex-pro", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-sbc6x.dts b/arch/arm/boot/dts/imx6q-sbc6x.dts index b7aa2f0b9f53..3129f727750f 100644 --- a/arch/arm/boot/dts/imx6q-sbc6x.dts +++ b/arch/arm/boot/dts/imx6q-sbc6x.dts @@ -13,6 +13,7 @@ compatible = "microsys,sbc6x", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 505cba776a2d..279b15e9ae2e 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -60,6 +60,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-ts4900.dts b/arch/arm/boot/dts/imx6q-ts4900.dts index e655107edc56..dce1e8671ebe 100644 --- a/arch/arm/boot/dts/imx6q-ts4900.dts +++ b/arch/arm/boot/dts/imx6q-ts4900.dts @@ -49,6 +49,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; }; diff --git a/arch/arm/boot/dts/imx6q-ts7970.dts b/arch/arm/boot/dts/imx6q-ts7970.dts index c615ac4feede..570bd3c309a6 100644 --- a/arch/arm/boot/dts/imx6q-ts7970.dts +++ b/arch/arm/boot/dts/imx6q-ts7970.dts @@ -50,6 +50,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; }; diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts index be85b980bdfe..f6ccbecff92c 100644 --- a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts +++ b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts @@ -13,6 +13,7 @@ compatible = "wand,imx6q-wandboard", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts index fcfba28764d4..55331021d80c 100644 --- a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts +++ b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts @@ -13,6 +13,7 @@ compatible = "wand,imx6q-wandboard", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-wandboard.dts b/arch/arm/boot/dts/imx6q-wandboard.dts index fa36fe183fc0..0be548beef86 100644 --- a/arch/arm/boot/dts/imx6q-wandboard.dts +++ b/arch/arm/boot/dts/imx6q-wandboard.dts @@ -13,6 +13,7 @@ compatible = "wand,imx6q-wandboard", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/imx6q-zii-rdu2.dts index 7da6dde9c857..0f0743db2779 100644 --- a/arch/arm/boot/dts/imx6q-zii-rdu2.dts +++ b/arch/arm/boot/dts/imx6q-zii-rdu2.dts @@ -50,6 +50,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 8381d24eff7d..d038f4117024 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -202,6 +202,7 @@ <&clks IMX6QDL_CLK_GPU2D_CORE>; clock-names = "bus", "core"; power-domains = <&pd_pu>; + #cooling-cells = <2>; }; ipu2: ipu@2800000 { diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 3dc99dd8dde1..8380f1b26826 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -49,6 +49,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 9332a31e6c8b..e3be453d8a4a 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -44,6 +44,7 @@ / { /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi new file mode 100644 index 000000000000..828cf3e39784 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +// +// Copyright (C) 2018 emtrion GmbH +// + +/ { + aliases { + boardid = &boardid; + mmc0 = &usdhc3; + mmc1 = &usdhc2; + mmc2 = &usdhc1; + mmc3 = &usdhc4; + }; + + reg_wall_5p0: reg-wall5p0 { + compatible = "regulator-fixed"; + regulator-name = "Main-Supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_base3p3: reg-base3p3 { + compatible = "regulator-fixed"; + vin-supply = <®_wall_5p0>; + regulator-name = "3V3-avari"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_base1p5: reg-base1p5 { + compatible = "regulator-fixed"; + vin-supply = <®_base3p3>; + regulator-name = "1V5-avari"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_usb_otg: reg-otgvbus { + compatible = "regulator-fixed"; + vin-supply = <®_wall_5p0>; + regulator-name = "OTG_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + + clk_codec: clock-codec { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "emCON-avari-sgtl5000"; + ssi-controller = <&ssi2>; + audio-codec = <&sgtl5000>; + audio-routing = + "Headphone Jack", "HP_OUT"; + mux-int-port = <2>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; + +&ecspi2 { + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + sgtl5000: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_codec>; + VDDA-supply = <®_base3p3>; + VDDIO-supply = <®_base3p3>; + }; + + captouch: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_irq_touch2 &pinctrl_emcon_gpio4>; + interrupt-parent = <&gpio6>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + wake-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + wakeup-source; + }; + + boardid: gpio@3a { + compatible = "nxp,pca8574"; + reg = <0x3a>; + gpio-controller; + #gpio-cells = <1>; + }; +}; + +&pcie { + status = "okay"; +}; + +&rgb_encoder { + status = "okay"; +}; + +&rgb_panel { + compatible = "edt,etm0700g0bdh6"; + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart2 { + status = "okay"; + uart-has-rtscts; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi new file mode 100644 index 000000000000..397e205551c4 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi @@ -0,0 +1,833 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +// +// Copyright (C) 2018 emtrion GmbH +// + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/input/input.h> + +/ { + + model = "emtrion SoM emCON-MX6"; + compatible = "emtrion,emcon-mx6"; + + aliases { + mmc0 = &usdhc3; + mmc1 = &usdhc2; + mmc2 = &usdhc1; + rtc0 = &ds1307; + }; + + chosen { + stdout-path = &uart1; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emcon_wake>; + + wake { + label = "Wake"; + linux,code = <KEY_WAKEUP>; + gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + som_leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_som_leds>; + + green { + label = "som:green"; + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + red { + label = "som:red"; + gpios = <&gpio3 1 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + }; + + lvds_backlight: lvds-backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds_bl>; + enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; + pwms = <&pwm1 0 50000>; + brightness-levels = < + 0 4 8 16 32 64 80 96 112 + 128 144 160 176 250 + >; + default-brightness-level = <13>; + status = "okay"; + }; + + pwm_fan: pwm-fan { + compatible = "pwm-fan"; + cooling-min-state = <0>; + cooling-max-state = <4>; + #cooling-cells = <2>; + pwms = <&pwm4 0 50000>; + cooling-levels = <0 64 127 191 255>; + status = "disabled"; + }; + + + rgb_encoder: display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgb24_display>; + status = "disabled"; + + port@0 { + reg = <0>; + + rgb_encoder_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + rgb_encoder_out: endpoint { + remote-endpoint = <&rgb_panel_in>; + }; + }; + }; + + rgb_panel: lcd { + backlight = <&rgb_backlight>; + power-supply = <®_parallel_disp>; + + port { + rgb_panel_in: endpoint { + remote-endpoint = <&rgb_encoder_out>; + }; + }; + }; + + reg_parallel_disp: reg-parallel-display { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgb_bl_en>; + regulator-name = "LCD-Supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lvds_disp: reg-lvds-display { + compatible = "regulator-fixed"; + regulator-name = "LVDS-Supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + rgb_backlight: rgb-backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgb_bl>; + enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + pwms = <&pwm3 0 5000000>; + brightness-levels = < + 250 176 160 144 128 112 + 96 80 64 48 32 16 8 1 + >; + default-brightness-level = <13>; + status = "okay"; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, + <&gpio2 27 GPIO_ACTIVE_HIGH>; +}; + +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nor_flash>; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; + phy-reset-duration = <50>; + phy-supply = <&vdd_1V8_reg>; + phy-handle = <&ksz9031>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ksz9031: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <30 IRQ_TYPE_EDGE_FALLING>; + rxdv-skew-ps = <480>; + txen-skew-ps = <480>; + rxd0-skew-ps = <480>; + rxd1-skew-ps = <480>; + rxd2-skew-ps = <480>; + rxd3-skew-ps = <480>; + txd0-skew-ps = <420>; + txd1-skew-ps = <420>; + txd2-skew-ps = <360>; + txd3-skew-ps = <360>; + txc-skew-ps = <1020>; + rxc-skew-ps = <960>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + da9063: pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio2>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + onkey { + compatible = "dlg,da9063-onkey"; + wakeup-source; + }; + + watchdog { + compatible = "dlg,da9063-watchdog"; + timeout-sec = <0>; + }; + + regulators { + vddcore_reg: bcore1 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <2>; + regulator-name = "DA9063_CORE"; + regulator-always-on; + }; + + vddsoc_reg: bcore2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <2>; + regulator-name = "DA9063_SOC"; + regulator-always-on; + }; + + vdd_ddr3_reg: bpro { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <2>; + regulator-always-on; + }; + + vdd_3v3_reg: bperi { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <2>; + regulator-always-on; + }; + + vdd_sata_reg: ldo3 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + vdd_mipi_reg: ldo4 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdd_mx6_snvs_reg: ldo5 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_hdmi_reg: ldo6 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_pcie_reg: ldo7 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdd_1V8_reg: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_3V3_sdc_reg: ldo9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_1V2_reg: ldo10 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + }; + }; + + ds1307: rtc@68 { + compatible = "dallas,ds1307"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; +}; + +&iomuxc { + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b060 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x130B0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b060 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b1 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b1 + >; + }; + + pinctrl_cpi1: csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b1 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b1 + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b1 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b1 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b1 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b1 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b1 + >; + }; + + /*camera2-pinctrl is in imx6q-emcon.dtsi or imx6dl-emcon.dtsi*/ + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 + >; + }; + + pinctrl_emcon_gpio1: emcongpio1 { + fsl,pins = < + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x0b0b1 + >; + }; + + pinctrl_emcon_gpio2: emcongpio2 { + fsl,pins = < + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0b0b1 + >; + }; + + pinctrl_emcon_gpio3: emcongpio3 { + fsl,pins = < + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0b0b1 + >; + }; + + pinctrl_emcon_gpio4: emcongpio4 { + fsl,pins = < + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0b0b1 + >; + }; + + pinctrl_emcon_gpio5: emcongpio5 { + fsl,pins = < + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x0b0b1 + >; + }; + + pinctrl_emcon_gpio6: emcongpio6 { + fsl,pins = < + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x0b0b1 + >; + }; + + pinctrl_emcon_gpio7: emcongpio7 { + fsl,pins = < + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x0b0b1 + >; + }; + + pinctrl_emcon_gpio8: emcongpio8 { + fsl,pins = < + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x0b0b1 + >; + }; + + pinctrl_emcon_irq_a: emconirqa { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x0b0b1 + >; + }; + + pinctrl_emcon_irq_b: emconirqb { + fsl,pins = < + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x0b0b1 + >; + }; + + pinctrl_emcon_irq_c: emconirqc { + fsl,pins = < + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x0b0b1 + >; + }; + + pinctrl_emcon_irq_pwr: emconirqpwr { + fsl,pins = < + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0b0b1 + >; + }; + + pinctrl_emcon_wake: emconwake { + fsl,pins = < + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b030 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x4001a0b1 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b058 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4000b070 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b870 + >; + }; + + pinctrl_irq_touch1: irqtouch1 { + fsl,pins = < + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x0b0b1 + >; + }; + + pinctrl_irq_touch2: irqtouch2 { + fsl,pins = < + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x0b0b1 + >; + }; + + pinctrl_lvds_bl: lvdsbacklightgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x0b0b1 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b1 + >; + }; + + pinctrl_lvds_reg: lvdsreggrp { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x0b0b1 + >; + }; + + + pinctrl_nor_flash: norflashgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b1 + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 + >; + }; + + pinctrl_pcie_ctrl: pciegrp { + fsl,pins = < + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b1 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0b0b1 + >; + }; + + pinctrl_pwm_fan: pwmfan { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x0b0b1 + >; + }; + + pinctrl_rgb_bl: rgbbacklightgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x0b0b1 + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b1 + >; + }; + + pinctrl_rgb_bl_en: rgbenable { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x0b0b1 + >; + }; + + pinctrl_rgb24_display: rgbgrp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_secure: securegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1 + >; + }; + + pinctrl_som_leds: somledgrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x0b0b1 + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x0b0b1 + >; + }; + + pinctrl_spdif_in: spdifin { + fsl,pins = < + MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 + >; + }; + + pinctrl_spdif_out: spdifout { + fsl,pins = < + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x13091 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usb_host1: usbhgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__USB_H1_PWR 0x1B058 + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1B058 + >; + }; + + pinctrl_usb_otg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x17059 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6QDL_PAD_GPIO_1__SD1_CD_B 0x1b0b1 + MX6QDL_PAD_DI0_PIN4__SD1_WP 0x1b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_GPIO_4__SD2_CD_B 0x1b0b1 + MX6QDL_PAD_GPIO_2__SD2_WP 0x1b0b1 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&rgb_encoder_in>; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_ctrl>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; + disable-gpio = <&gpio2 22 GPIO_ACTIVE_LOW>; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_host1>; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg>; + vbus-supply = <®_usb_otg>; + dr_mode = "peripheral"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + fsl,wp-controller; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + fsl,wp-controller; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + non-removable; + bus-width = <8>; + status = "okay"; +}; + +/******device power Management*********/ + +&cpu0 { + voltage-tolerance = <2>; +}; + +®_arm { + vin-supply = <&vddcore_reg>; +}; + +®_soc { + vin-supply = <&vddsoc_reg>; +}; + +®_pu { + vin-supply = <&vddsoc_reg>; +}; + +/*******Disabled HW following***********/ + +&snvs_rtc { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 17a7b9c083d0..d3609966b846 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -45,6 +45,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index b8044681006c..2ff377d0df7e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -60,6 +60,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 629908fbaa32..68ab54351109 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -60,6 +60,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index a1a6fb5541e1..81b2fcf6eedf 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -60,6 +60,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index 4e21b3849394..8e46a80f57a4 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -75,6 +75,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index 81dae5b5bc87..dacc2a14d0e7 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -52,6 +52,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi index c5d95e8d2e09..a1066897be18 100644 --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi @@ -81,6 +81,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi index b5986efe1090..e8e36dfd0a6b 100644 --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -114,6 +114,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi index 368132274a91..9cb9a7439121 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi @@ -84,6 +84,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi index 3c52bdb453f3..6d21cc6a9d4b 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi @@ -94,6 +94,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 0e64016e765f..2ffb21dd89f2 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -43,6 +43,7 @@ / { /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi index c413f9c3540f..e4231331f04e 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi @@ -43,6 +43,7 @@ / { /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi index ba93026ecee8..1d1b4bd0670f 100644 --- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi @@ -10,6 +10,7 @@ / { memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi index 84d03c65f4c8..7814f1ef0804 100644 --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -10,9 +10,14 @@ / { memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; + chosen { + stdout-path = &uart4; + }; + backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; pwms = <&pwm3 0 100000>; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index 29baf25ae5d0..7a85116ef1d2 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -11,6 +11,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index 39200e5dc896..c3415aa348a2 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -11,6 +11,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0xF0000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index 572abd7499b1..ed53f07c6b7b 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -11,6 +11,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 98384a6c5d12..8b0e432099b5 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -13,6 +13,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index ed1aafd56973..1b50b01e9bac 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -16,6 +16,7 @@ compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index a6dc5c42c632..1280de50a984 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -12,6 +12,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; @@ -75,39 +76,49 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + reg_audio: regulator-audio { + compatible = "regulator-fixed"; + regulator-name = "cs42888_supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_audio: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "cs42888_supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_usb_h1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usb_otg_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can_en: regulator-can-en { + compatible = "regulator-fixed"; + regulator-name = "can-en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&max7310_b 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can_stby: regulator-can-stby { + compatible = "regulator-fixed"; + regulator-name = "can-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_can_en>; }; sound-cs42888 { @@ -288,6 +299,20 @@ status = "okay"; }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can_stby>; + status = "disabled"; /* pin conflict with fec */ +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can_stby>; + status = "okay"; +}; + &gpmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; @@ -503,6 +528,20 @@ >; }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x17059 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x17059 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x17059 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x17059 + >; + }; + pinctrl_gpio_keys: gpiokeysgrp { fsl,pins = < MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0 @@ -758,6 +797,10 @@ status = "okay"; }; +&pcie { + status = "okay"; +}; + &spdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spdif>; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 654cf2c9b073..8468216dae9b 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -50,6 +50,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 6e46a195b399..8930aec6464c 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -13,55 +13,58 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_otg_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; - enable-active-high; - vin-supply = <&swbst_reg>; - }; - - reg_usb_h1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 29 0>; - enable-active-high; - vin-supply = <&swbst_reg>; - }; - - reg_audio: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "wm8962-supply"; - gpio = <&gpio4 10 0>; - enable-active-high; - }; - - reg_pcie: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pcie_reg>; - regulator-name = "MPCIE_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 19 0>; - enable-active-high; - }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_audio: regulator-audio { + compatible = "regulator-fixed"; + regulator-name = "wm8962-supply"; + gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_pcie: regulator-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_sensors: regulator-sensors { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sensors_reg>; + regulator-name = "sensors-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; }; gpio-keys { @@ -240,6 +243,15 @@ >; }; + accelerometer@1c { + compatible = "fsl,mma8451"; + reg = <0x1c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_mma8451_int>; + interrupt-parent = <&gpio1>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + }; + ov5642: camera@3c { compatible = "ovti,ov5642"; pinctrl-names = "default"; @@ -272,6 +284,16 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + touchscreen@4 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_egalax_int>; + interrupt-parent = <&gpio6>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + }; + ov5640: camera@3c { compatible = "ovti,ov5640"; pinctrl-names = "default"; @@ -410,6 +432,24 @@ interrupts = <7 2>; wakeup-gpios = <&gpio6 7 0>; }; + + magnetometer@e { + compatible = "fsl,mag3110"; + reg = <0x0e>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_mag3110_int>; + interrupt-parent = <&gpio3>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; + }; + + light-sensor@44 { + compatible = "isil,isl29023"; + reg = <0x44>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_isl29023_int>; + interrupt-parent = <&gpio3>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; }; &iomuxc { @@ -491,6 +531,12 @@ >; }; + pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0xb0b1 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 @@ -498,6 +544,12 @@ >; }; + pinctrl_i2c2_egalax_int: i2c2egalaxintgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 + >; + }; + pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 @@ -505,6 +557,18 @@ >; }; + pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0xb0b1 + >; + }; + + pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D16__GPIO3_IO16 0xb0b1 + >; + }; + pinctrl_ipu1_csi0: ipu1csi0grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 @@ -553,6 +617,12 @@ >; }; + pinctrl_sensors_reg: sensorsreggrp { + fsl,pins = < + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index a98fb2564c63..c68cb90fd801 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -62,6 +62,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; /* will be filled by U-Boot */ }; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 4f27861bbb32..776bfc77f89d 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -32,6 +32,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; @@ -195,6 +196,13 @@ >; }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + pinctrl_usbh: usbhgrp { fsl,pins = < MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 @@ -265,6 +273,12 @@ status = "okay"; }; +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh>; diff --git a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi index 38080c1dfaec..8752a4961c47 100644 --- a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi +++ b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi @@ -11,6 +11,7 @@ / { memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi index 855dc6f9df75..e781a45785ed 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi @@ -1,13 +1,8 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2013 Freescale Semiconductor, Inc. +// +// Author: Fabio Estevam <fabio.estevam@freescale.com> #include "imx6qdl-wandboard.dtsi" diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi index 49a0a557e62e..3874e74703f0 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi @@ -1,13 +1,8 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2013 Freescale Semiconductor, Inc. +// +// Author: Fabio Estevam <fabio.estevam@freescale.com> #include "imx6qdl-wandboard.dtsi" diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi index 69d9c8661439..93909796885a 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi @@ -1,13 +1,8 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2013 Freescale Semiconductor, Inc. +// +// Author: Fabio Estevam <fabio.estevam@freescale.com> #include "imx6qdl-wandboard.dtsi" diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 85e79a33bcd4..69942c7ff89d 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -609,13 +609,14 @@ }; touchscreen@2a { - compatible = "eeti,egalax_ts"; + compatible = "eeti,exc3000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ts>; reg = <0x2a>; interrupt-parent = <&gpio1>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; - wakeup-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index e4daf150881a..fe17a3405edc 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -13,10 +13,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &fec; @@ -77,6 +75,7 @@ fsl,tempmon = <&anatop>; fsl,tempmon-data = <&ocotp>; clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + #thermal-sensor-cells = <0>; }; ldb: ldb { @@ -139,6 +138,16 @@ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; }; + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -216,6 +225,7 @@ <&clks IMX6QDL_CLK_GPU3D_SHADER>; clock-names = "bus", "core", "shader"; power-domains = <&pd_pu>; + #cooling-cells = <2>; }; gpu_2d: gpu@134000 { @@ -226,6 +236,7 @@ <&clks IMX6QDL_CLK_GPU2D_CORE>; clock-names = "bus", "core"; power-domains = <&pd_pu>; + #cooling-cells = <2>; }; timer@a00600 { @@ -548,6 +559,7 @@ clocks = <&clks IMX6QDL_CLK_CAN1_IPG>, <&clks IMX6QDL_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x34 28 0x10 17>; status = "disabled"; }; @@ -558,6 +570,7 @@ clocks = <&clks IMX6QDL_CLK_CAN2_IPG>, <&clks IMX6QDL_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x34 29 0x10 18>; status = "disabled"; }; @@ -981,6 +994,8 @@ reg = <0x02184400 0x200>; interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; + fsl,usbphy = <&usbphynop1>; + phy_type = "hsic"; fsl,usbmisc = <&usbmisc 2>; dr_mode = "host"; ahb-burst-config = <0x0>; @@ -994,6 +1009,8 @@ reg = <0x02184600 0x200>; interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; + fsl,usbphy = <&usbphynop2>; + phy_type = "hsic"; fsl,usbmisc = <&usbmisc 3>; dr_mode = "host"; ahb-burst-config = <0x0>; @@ -1115,6 +1132,7 @@ mmdc0: mmdc@21b0000 { /* MMDC0 */ compatible = "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; + clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>; }; mmdc1: mmdc@21b4000 { /* MMDC1 */ diff --git a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts index bcca5ac5fa51..08d8b78a2096 100644 --- a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts +++ b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts @@ -13,6 +13,7 @@ compatible = "wand,imx6qp-wandboard", "fsl,imx6qp"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts index 8c293e9f36a7..98bf7a6b2850 100644 --- a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts +++ b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts @@ -50,6 +50,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; }; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 679b4482ab13..f7a48e4622e1 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -17,6 +17,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts index 404e602e6781..408da704c459 100644 --- a/arch/arm/boot/dts/imx6sl-warp.dts +++ b/arch/arm/boot/dts/imx6sl-warp.dts @@ -55,6 +55,7 @@ compatible = "warp,imx6sl-warp", "fsl,imx6sl"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 7a3ae7160c12..e7524e73efb4 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -13,10 +13,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &fec; @@ -110,6 +108,11 @@ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; }; + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -588,7 +591,6 @@ regulator-name = "vddpu"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1450000>; - regulator-always-on; anatop-reg-offset = <0x140>; anatop-vol-bit-shift = <9>; anatop-vol-bit-width = <5>; @@ -815,6 +817,8 @@ reg = <0x02184400 0x200>; interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_USBOH3>; + fsl,usbphy = <&usbphynop1>; + phy_type = "hsic"; fsl,usbmisc = <&usbmisc 2>; dr_mode = "host"; ahb-burst-config = <0x0>; @@ -921,6 +925,7 @@ mmdc: mmdc@21b0000 { compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; + clocks = <&clks IMX6SL_CLK_MMDC_P0_IPG>; }; rngb: rngb@21b4000 { diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts index c8e115564ba2..d8163705363e 100644 --- a/arch/arm/boot/dts/imx6sll-evk.dts +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -20,6 +20,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x80000000>; }; @@ -31,6 +32,18 @@ status = "okay"; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + user { + label = "debug"; + gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + reg_usb_otg1_vbus: regulator-otg1-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -301,6 +314,12 @@ status = "okay"; }; +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; +}; + &iomuxc { pinctrl_reg_sd3_vmmc: sd3vmmcgrp { fsl,pins = < @@ -455,9 +474,21 @@ >; }; + pinctrl_led: ledgrp { + fsl,pins = < + MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 0x17059 + >; + }; + pinctrl_pwm1: pmw1grp { fsl,pins = < MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0 >; }; + + pinctrl_wdog1: wdog1grp { + fsl,pins = < + MX6SLL_PAD_WDOG_B__WDOG1_B 0x170b0 + >; + }; }; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index beefa1b2049d..62847c68330b 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -593,7 +593,6 @@ #interrupt-cells = <3>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&intc>; - fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>; }; iomuxc: pinctrl@20e0000 { @@ -770,6 +769,7 @@ mmdc: memory-controller@21b0000 { compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; + clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>; }; ocotp: ocotp-ctrl@21bc000 { diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index adb5cc7d8ce2..832b5c5d7441 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -12,6 +12,7 @@ compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index 841a27f3198f..b0ee324afe58 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -11,6 +11,7 @@ compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x80000000>; }; @@ -36,6 +37,35 @@ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + reg_can_wake: regulator-can-wake { + compatible = "regulator-fixed"; + regulator-name = "can-wake"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can_en: regulator-can-en { + compatible = "regulator-fixed"; + regulator-name = "can-en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_can_wake>; + }; + + reg_can_stby: regulator-can-stby { + compatible = "regulator-fixed"; + regulator-name = "can-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&max7310_b 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_can_en>; + }; }; &anaclk2 { @@ -75,6 +105,20 @@ status = "okay"; }; +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can_stby>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -149,6 +193,20 @@ >; }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020 + MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020 + MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b020 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index 9cc6ff206aea..00c485482301 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2015 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015 Freescale Semiconductor, Inc. #include "imx6sx-sdb.dtsi" @@ -132,13 +128,29 @@ #size-cells = <1>; compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; }; - flash1: s25fl128s@1 { - reg = <1>; + flash1: s25fl128s@2 { + reg = <2>; #address-cells = <1>; #size-cells = <1>; compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; }; }; + +®_can_en { + /* Transceiver EN/STBY is active high on RevA board */ + gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; + enable-active-high; +}; + +®_can_stby { + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_can_en>; +}; diff --git a/arch/arm/boot/dts/imx6sx-sdb-sai.dts b/arch/arm/boot/dts/imx6sx-sdb-sai.dts index 2ac865b7c364..1c4eacd68e1b 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-sai.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-sai.dts @@ -1,43 +1,6 @@ -/* - * Copyright (C) 2016 NXP Semiconductors - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (C) 2016 Freescale Semiconductor, Inc. #include "imx6sx-sdb.dts" diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 6dd9bebfe027..998e3e13a005 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2015 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015 Freescale Semiconductor, Inc. #include "imx6sx-sdb.dtsi" @@ -117,15 +113,19 @@ #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; - flash1: n25q256a@1 { + flash1: n25q256a@2 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; - reg = <1>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + reg = <2>; }; }; @@ -136,3 +136,8 @@ ®_soc { vin-supply = <&sw1a_reg>; }; + +®_can_stby { + /* Transceiver EN/STBY is active low on RevB board */ + gpio = <&gpio4 27 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index 7d7d679945d2..08ede56c3f10 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2014 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2014 Freescale Semiconductor, Inc. /dts-v1/; @@ -21,6 +17,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; @@ -140,6 +137,20 @@ regulator-max-microvolt = <5000000>; }; + reg_can_en: regulator-can-en { + compatible = "regulator-fixed"; + regulator-name = "can-en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_can_stby: regulator-can-stby { + compatible = "regulator-fixed"; + regulator-name = "can-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + sound { compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962"; model = "wm8962-audio"; @@ -207,6 +218,20 @@ status = "okay"; }; +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can_stby>; + status = "okay"; +}; + &i2c3 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -404,6 +429,20 @@ >; }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020 + MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020 + MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b020 + >; + }; + pinctrl_gpio_keys: gpio_keysgrp { fsl,pins = < MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059 diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts index 252175b59247..2bc51623a806 100644 --- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts +++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts @@ -21,6 +21,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts index 40ccdf43dffc..db0feb9b9f5d 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts @@ -49,6 +49,7 @@ compatible = "udoo,neobasic", "fsl,imx6sx"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts index 42bfc8f8f7f6..5c7a2bb9141c 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts @@ -49,6 +49,7 @@ compatible = "udoo,neoextended", "fsl,imx6sx"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts index c84c877f09d4..13dfe2afaba5 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts @@ -49,6 +49,7 @@ compatible = "udoo,neofull", "fsl,imx6sx"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 95a3c1cb877d..272ff6133ec1 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -15,10 +15,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { can0 = &flexcan1; @@ -159,6 +157,11 @@ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; }; + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -448,6 +451,7 @@ clocks = <&clks IMX6SX_CLK_CAN1_IPG>, <&clks IMX6SX_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x10 1 0x10 17>; status = "disabled"; }; @@ -458,6 +462,7 @@ clocks = <&clks IMX6SX_CLK_CAN2_IPG>, <&clks IMX6SX_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x10 2 0x10 18>; status = "disabled"; }; @@ -558,7 +563,7 @@ compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SX_CLK_DUMMY>; + clocks = <&clks IMX6SX_CLK_IPG>; status = "disabled"; }; @@ -566,14 +571,14 @@ compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SX_CLK_DUMMY>; + clocks = <&clks IMX6SX_CLK_IPG>; }; wdog2: wdog@20c0000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SX_CLK_DUMMY>; + clocks = <&clks IMX6SX_CLK_IPG>; status = "disabled"; }; @@ -877,6 +882,7 @@ reg = <0x02184400 0x200>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_USBOH3>; + fsl,usbphy = <&usbphynop1>; fsl,usbmisc = <&usbmisc 2>; phy_type = "hsic"; fsl,anatop = <&anatop>; @@ -1002,6 +1008,7 @@ mmdc: mmdc@21b0000 { compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; + clocks = <&clks IMX6SX_CLK_MMDC_P0_IPG>; }; fec2: ethernet@21b4000 { @@ -1193,11 +1200,11 @@ }; pxp: pxp@2218000 { + compatible = "fsl,imx6sx-pxp", "fsl,imx6ull-pxp"; reg = <0x02218000 0x4000>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SX_CLK_PXP_AXI>, - <&clks IMX6SX_CLK_DISPLAY_AXI>; - clock-names = "pxp-axi", "disp-axi"; + clocks = <&clks IMX6SX_CLK_PXP_AXI>; + clock-names = "axi"; status = "disabled"; }; @@ -1269,7 +1276,7 @@ compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x02288000 0x4000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SX_CLK_DUMMY>; + clocks = <&clks IMX6SX_CLK_IPG>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index 32a07232c034..9207d5d071f1 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2015 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015 Freescale Semiconductor, Inc. / { chosen { @@ -12,6 +8,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; @@ -33,6 +30,14 @@ enable-active-high; }; + reg_can_3v3: regulator-can-3v3 { + compatible = "regulator-fixed"; + regulator-name = "can-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "mx6ul-wm8960"; @@ -67,6 +72,28 @@ }; }; + spi4 { + compatible = "spi-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi4>; + status = "okay"; + gpio-sck = <&gpio5 11 0>; + gpio-mosi = <&gpio5 10 0>; + cs-gpios = <&gpio5 7 0>; + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + + gpio_spi: gpio@0 { + compatible = "fairchild,74hc595"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + registers-number = <1>; + spi-max-frequency = <100000>; + }; + }; + panel { compatible = "innolux,at043tn24"; backlight = <&backlight_display>; @@ -133,6 +160,20 @@ }; }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can_3v3>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can_3v3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -176,6 +217,8 @@ #size-cells = <1>; compatible = "micron,n25q256a"; spi-max-frequency = <29000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; }; @@ -418,6 +461,15 @@ >; }; + pinctrl_spi4: spi4grp { + fsl,pins = < + MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1 + MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1 + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x70a1 + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000 + >; + }; + pinctrl_tsc: tscgrp { fsl,pins = < MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts index 11966d12af76..3749fdda3611 100644 --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts @@ -24,6 +24,18 @@ status = "okay"; }; + panel { + compatible = "auo,g101evn010", "simple-panel"; + power-supply = <&ldo4_ext>; + backlight = <&lcd_backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + reg_usb_otg1_vbus: regulator-usb-otg1 { compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; @@ -105,6 +117,19 @@ }; }; +&i2c1 { + touchscreen@14 { + compatible = "goodix,gt911"; + reg = <0x14>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_goodix_touch>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + irq-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; +}; + &lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat0_17 @@ -112,6 +137,12 @@ &pinctrl_lcdif_hvsync>; lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */ status = "okay"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; &ldo4_ext { @@ -272,6 +303,12 @@ >; }; + pinctrl_goodix_touch: goodixgrp{ + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1020 + >; + }; + pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 { fsl,pins = < MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi index c71a84da1af0..b5781c3656d1 100644 --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi @@ -7,6 +7,11 @@ */ / { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0>; /* will be filled by U-Boot */ + }; + reserved-memory { #address-cells = <1>; #size-cells = <1>; @@ -161,6 +166,25 @@ }; }; +/* UART1 (Bluetooth) */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "okay"; +}; + +/* USDHC1 (Wireless) */ +&usdhc1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_wifibt_ctrl>; + pinctrl-1 = <&pinctrl_usdhc1_sleep &pinctrl_wifibt_ctrl_sleep>; + non-removable; + no-1-8-v; + bus-width = <4>; + status = "okay"; +}; + &iomuxc { pinctrl_gpmi_nand: gpmigrp { fsl,pins = < @@ -179,15 +203,60 @@ MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb0b1 - >; - }; + >; + }; pinctrl_i2c1: i2c1grp { fsl,pins = < MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 - >; - }; + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x1b0b1 + MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17051 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_sleep: usdhc1grp-sleep { + fsl,pins = < + MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x3000 + MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x3000 + MX6UL_PAD_SD1_DATA0__GPIO2_IO18 0x3000 + MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x3000 + MX6UL_PAD_SD1_DATA2__GPIO2_IO20 0x3000 + MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x3000 + >; + }; + + pinctrl_wifibt_ctrl: wifibt-ctrl-grp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x08a0 + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x08a0 + >; + }; + + pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-grp-sleep { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x3000 + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x3000 + >; + }; }; ®_arm { diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts index e22ec5be2b78..bc77f26a2f1d 100644 --- a/arch/arm/boot/dts/imx6ul-geam.dts +++ b/arch/arm/boot/dts/imx6ul-geam.dts @@ -15,6 +15,7 @@ compatible = "engicam,imx6ul-geam", "fsl,imx6ul"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi index b1fa3f0a684d..213e802bf35c 100644 --- a/arch/arm/boot/dts/imx6ul-isiot.dtsi +++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi @@ -10,6 +10,7 @@ / { memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6ul-litesom.dtsi b/arch/arm/boot/dts/imx6ul-litesom.dtsi index 8f775f6974d1..8d6893210842 100644 --- a/arch/arm/boot/dts/imx6ul-litesom.dtsi +++ b/arch/arm/boot/dts/imx6ul-litesom.dtsi @@ -48,6 +48,7 @@ compatible = "grinn,imx6ul-litesom", "fsl,imx6ul"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi index a031bee311df..cf7faf4b9c47 100644 --- a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi @@ -49,6 +49,7 @@ / { memory@80000000 { + device_type = "memory"; reg = <0x80000000 0>; /* will be filled by U-Boot */ }; diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts index 0c09420f9951..39eeeddac39e 100644 --- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts @@ -1,123 +1,33 @@ -/* - * Copyright 2015 Technexion Ltd. - * - * Author: Wig Cheng <wig.cheng@technexion.com> - * Richard Hu <richard.hu@technexion.com> - * Tapani Utriainen <tapani@technexion.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2015 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> /dts-v1/; -#include "imx6ul.dtsi" - +#include "imx6ul-pico.dtsi" / { - model = "Technexion Pico i.MX6UL Board"; + model = "TechNexion PICO-IMX6UL and HOBBIT baseboard"; compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul"; - /* Will be filled by the bootloader */ - memory@80000000 { - reg = <0x80000000 0>; - }; - - chosen { - stdout-path = &uart6; - }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm3 0 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - status = "okay"; - }; - - reg_2p5v: regulator-2p5v { - compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_sd1_vmmc: regulator-sd1-vmmc { - compatible = "regulator-fixed"; - regulator-name = "VSD_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usb_otg_vbus: regulator-usb-otg-vbus { - compatible = "regulator-fixed"; + leds { + compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg1>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 6 0>; - }; + pinctrl-0 = <&pinctrl_gpio_leds>; - reg_brcm: regulator-brcm { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_brcm_reg>; - regulator-name = "brcm_reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <200000>; + led { + label = "gpio-led"; + gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + }; }; sound { compatible = "fsl,imx-audio-sgtl5000"; model = "imx6ul-sgtl5000"; audio-cpu = <&sai1>; - audio-codec = <&codec>; + audio-codec = <&sgtl5000>; audio-routing = "LINE_IN", "Line In Jack", "MIC_IN", "Mic Jack", @@ -130,92 +40,6 @@ #clock-cells = <0>; clock-frequency = <24576000>; }; - - leds { - compatible = "gpio-leds"; - - hobbitled { - label = "hobbitled"; - gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; - status = "okay"; -}; - -&clks { - assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; - assigned-clock-rates = <786432000>; -}; - -&fec2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet2>; - phy-mode = "rmii"; - phy-handle = <ðphy1>; - status = "okay"; - phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; - phy-reset-duration = <1>; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - max-speed = <100>; - interrupt-parent = <&gpio5>; - interrupts = <6 IRQ_TYPE_LEVEL_LOW>; - }; - }; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - pmic: pfuze3000@8 { - compatible = "fsl,pfuze3000"; - reg = <0x08>; - - regulators { - /* VDD_ARM_SOC_IN*/ - sw1b_reg: sw1b { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1475000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - - /* DRAM */ - sw3a_reg: sw3 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1650000>; - regulator-boot-on; - regulator-always-on; - }; - - /* DRAM */ - vref_reg: vrefddr { - regulator-boot-on; - regulator-always-on; - }; - }; - }; }; &i2c2 { @@ -224,7 +48,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - codec: sgtl5000@a { + sgtl5000: codec@a { reg = <0x0a>; compatible = "fsl,sgtl5000"; clocks = <&sys_mclk>; @@ -234,317 +58,43 @@ }; &i2c3 { - clock_frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; -}; - -&lcdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33200000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <210>; - hback-porch = <46>; - hsync-len = <1>; - vback-porch = <22>; - vfront-porch = <23>; - vsync-len = <1>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; + polytouch: touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; }; -}; - -&pwm3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm3>; - status = "okay"; -}; - -&pwm7 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm7>; - status = "okay"; -}; - -&pwm8 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm8>; - status = "okay"; -}; - -&sai1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai1>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - uart-has-rtscts; - status = "okay"; -}; - -&uart6 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart6>; - status = "okay"; -}; - -&usbotg1 { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg1_id>; - dr_mode = "otg"; - disable-over-current; - status = "okay"; -}; - -&usbotg2 { - dr_mode = "host"; - disable-over-current; - status = "okay"; -}; -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - bus-width = <8>; - no-1-8-v; - non-removable; - keep-power-in-suspend; - status = "okay"; -}; - -&usdhc2 { /* Wifi SDIO */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - no-1-8-v; - non-removable; - keep-power-in-suspend; - wakeup-source; - vmmc-supply = <®_brcm>; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; + adc081c: adc@50 { + compatible = "ti,adc081c"; + reg = <0x50>; + vref-supply = <®_3p3v>; + }; }; &iomuxc { - pinctrl_brcm_reg: brcmreggrp { - fsl,pins = < - MX6UL_PAD_NAND_DATA06__GPIO4_IO08 0x10b0 /* WL_REG_ON */ - MX6UL_PAD_NAND_DATA04__GPIO4_IO06 0x10b0 /* WL_HOST_WAKE */ - >; - }; - - pinctrl_enet2: enet2grp { - fsl,pins = < - MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x1b0b0 - MX6UL_PAD_ENET1_TX_EN__ENET2_MDC 0x1b0b0 - MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 - MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 - MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x800 - MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x79 - >; - }; - - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020 - MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020 - >; - }; - - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020 - MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x4001b8b0 - MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x4001b8b0 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 - MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6UL_PAD_UART1_TX_DATA__I2C3_SCL 0x4001b8b0 - MX6UL_PAD_UART1_RX_DATA__I2C3_SDA 0x4001b8b0 - >; - }; - - pinctrl_lcdif_dat: lcdifdatgrp { - fsl,pins = < - MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 - MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 - MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 - MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 - MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 - MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 - MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 - MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 - MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 - MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 - MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 - MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 - MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 - MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 - MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 - MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 - MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 - MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 - MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 - MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 - MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 - MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 - MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 - MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 - >; - }; - - pinctrl_lcdif_ctrl: lcdifctrlgrp { - fsl,pins = < - MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 - MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 - MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 - MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 - /* LCD reset */ - MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79 - >; - }; - - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6UL_PAD_NAND_ALE__PWM3_OUT 0x110b0 - >; - }; - - pinctrl_pwm7: pwm7grp { - fsl,pins = < - MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x110b0 - >; - }; - - pinctrl_pwm8: pwm8grp { - fsl,pins = < - MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0 - >; - }; - - pinctrl_sai1: sai1grp { - fsl,pins = < - MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x1b0b0 - MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x1b0b0 - MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x110b0 - MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x1f0b8 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b0 - MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b0 - MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b0 - MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b0 - >; - }; - - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x1b0b1 - MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x1b0b1 - MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1 - MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1 - >; - }; - - pinctrl_uart6: uart6grp { - fsl,pins = < - MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1 - MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_usb_otg1: usbotg1grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x10b0 - >; - }; - - pinctrl_usb_otg1_id: usbotg1idgrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 - MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x03029 - MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059 - MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059 - MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059 - MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059 - >; - }; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; - pinctrl_usdhc2: usdhc2grp { + pinctrl_hog: hoggrp { fsl,pins = < - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x10b0 + MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x10b0 + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x10b0 + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x10b0 + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x10b0 + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x10b0 >; }; - pinctrl_wdog: wdoggrp { + pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < - MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x10b0 >; }; }; diff --git a/arch/arm/boot/dts/imx6ul-pico-pi.dts b/arch/arm/boot/dts/imx6ul-pico-pi.dts new file mode 100644 index 000000000000..de07357b27fc --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-pico-pi.dts @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2015 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> +/dts-v1/; + +#include "imx6ul-pico.dtsi" +/ { + model = "TechNexion PICO-IMX6UL and PI baseboard"; + compatible = "technexion,imx6ul-pico-pi", "fsl,imx6ul"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6ul-sgtl5000"; + audio-cpu = <&sai1>; + audio-codec = <&sgtl5000>; + audio-routing = + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + }; + + sys_mclk: clock-sys-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + sgtl5000: codec@a { + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&sys_mclk>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c3 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + polytouch: touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x10b0 + MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x10b0 + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x10b0 + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x10b0 + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x10b0 + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x10b0 + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x10b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/imx6ul-pico.dtsi new file mode 100644 index 000000000000..de9f83189ba8 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-pico.dtsi @@ -0,0 +1,461 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2015 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> +/dts-v1/; + +#include "imx6ul.dtsi" + +/ { + /* Will be filled by the bootloader */ + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0>; + }; + + chosen { + stdout-path = &uart6; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 6 0>; + }; + + reg_brcm: regulator-brcm { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_brcm_reg>; + regulator-name = "brcm_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <200000>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <786432000>; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + max-speed = <100>; + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze3000@8 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + /* VDD_ARM_SOC_IN*/ + sw1b_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + /* DRAM */ + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + /* DRAM */ + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + + timing0: timing0 { + clock-frequency = <33200000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <210>; + hback-porch = <46>; + hsync-len = <1>; + vback-porch = <22>; + vfront-porch = <23>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm7>; + status = "okay"; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + dr_mode = "otg"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-1-8-v; + non-removable; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc2 { /* Wifi SDIO */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + non-removable; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_brcm>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + +&iomuxc { + pinctrl_brcm_reg: brcmreggrp { + fsl,pins = < + MX6UL_PAD_NAND_DATA06__GPIO4_IO08 0x10b0 /* WL_REG_ON */ + MX6UL_PAD_NAND_DATA04__GPIO4_IO06 0x10b0 /* WL_HOST_WAKE */ + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET2_MDC 0x1b0b0 + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x800 + MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x79 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020 + MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__I2C3_SCL 0x4001b8b0 + MX6UL_PAD_UART1_RX_DATA__I2C3_SDA 0x4001b8b0 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 + >; + }; + + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + /* LCD reset */ + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_NAND_ALE__PWM3_OUT 0x110b0 + >; + }; + + pinctrl_pwm7: pwm7grp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x110b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x1b0b0 + MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x1b0b0 + MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x110b0 + MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x1f0b8 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b0 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b0 + MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b0 + MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b0 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x1b0b1 + MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1 + MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1 + MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x10b0 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x03029 + MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059 + MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059 + MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059 + MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index 02b5ba42cd59..bb6dbfd5546b 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -71,6 +71,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0>; /* will be filled by U-Boot */ }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 083d3446c41d..62ed30c781ed 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -15,10 +15,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &fec1; @@ -96,7 +94,7 @@ intc: interrupt-controller@a01000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; #interrupt-cells = <3>; interrupt-controller; interrupt-parent = <&intc>; @@ -108,10 +106,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; interrupt-parent = <&intc>; status = "disabled"; }; @@ -185,7 +183,7 @@ clocks = <&clks IMX6UL_CLK_APBHDMA>; }; - gpmi: gpmi-nand@1806000 { + gpmi: gpmi-nand@1806000 { compatible = "fsl,imx6q-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; @@ -408,6 +406,7 @@ clocks = <&clks IMX6UL_CLK_CAN1_IPG>, <&clks IMX6UL_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x10 1 0x10 17>; status = "disabled"; }; @@ -418,6 +417,7 @@ clocks = <&clks IMX6UL_CLK_CAN2_IPG>, <&clks IMX6UL_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x10 2 0x10 18>; status = "disabled"; }; @@ -917,6 +917,7 @@ mmdc: mmdc@21b0000 { compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; + clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>; }; weim: weim@21b8000 { diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/imx6ull-14x14-evk.dts index 0ba64546c13b..74aaa8a56a3d 100644 --- a/arch/arm/boot/dts/imx6ull-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ull-14x14-evk.dts @@ -1,43 +1,6 @@ -/* - * Copyright (C) 2016 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (C) 2016 Freescale Semiconductor, Inc. /dts-v1/; diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi index 10ab4697950f..fb213bec4654 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi @@ -7,6 +7,7 @@ / { memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x10000000>; }; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi index 183193e8580d..038d8c90f6df 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi @@ -7,6 +7,7 @@ / { memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi index 796ed35d4ac9..f3668fe69eac 100644 --- a/arch/arm/boot/dts/imx6ull.dtsi +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -39,6 +39,16 @@ reg = <0x02200000 0x100000>; ranges; + dcp: crypto@2280000 { + compatible = "fsl,imx6ull-dcp", "fsl,imx28-dcp"; + reg = <0x02280000 0x4000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6ULL_CLK_DCP_CLK>; + clock-names = "dcp"; + }; + iomuxc_snvs: iomuxc-snvs@2290000 { compatible = "fsl,imx6ull-iomuxc-snvs"; reg = <0x02290000 0x4000>; diff --git a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts index 6f1af240e0ce..483d9732c002 100644 --- a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts @@ -9,6 +9,8 @@ /delete-node/ &fec1; /delete-node/ &fec2; +/delete-node/ &can1; +/delete-node/ &can2; /delete-node/ &lcdif; /delete-node/ &tsc; diff --git a/arch/arm/boot/dts/imx6ulz.dtsi b/arch/arm/boot/dts/imx6ulz.dtsi index ae6d7e593769..0b5f1a763567 100644 --- a/arch/arm/boot/dts/imx6ulz.dtsi +++ b/arch/arm/boot/dts/imx6ulz.dtsi @@ -20,8 +20,6 @@ }; /delete-node/ &adc1; -/delete-node/ &can1; -/delete-node/ &can2; /delete-node/ &ecspi3; /delete-node/ &ecspi4; /delete-node/ &epit2; diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index 8bf365d28cac..e61567437d73 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -19,6 +19,7 @@ compatible = "compulab,cl-som-imx7", "fsl,imx7d"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */ }; @@ -284,4 +285,4 @@ MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */ >; }; -};
\ No newline at end of file +}; diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi index 04d24ee17b14..898f4b8d7421 100644 --- a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi +++ b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi @@ -8,6 +8,7 @@ / { memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi index d9f8fb69511b..e2e327f437e3 100644 --- a/arch/arm/boot/dts/imx7d-colibri.dtsi +++ b/arch/arm/boot/dts/imx7d-colibri.dtsi @@ -45,6 +45,7 @@ / { memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index 177d21fdeb28..6b4acea1ef79 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -12,6 +12,7 @@ compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts new file mode 100644 index 000000000000..7b2198a9372c --- /dev/null +++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// +// Copyright 2017 NXP + +#include "imx7d-pico.dtsi" + +/ { + model = "TechNexion PICO-IMX7D Board using Hobbit baseboard"; + compatible = "technexion,imx7d-pico-hobbit", "fsl,imx7d"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx7-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,cpu { + sound-dai = <&sai1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + }; + }; +}; + +&i2c1 { + sgtl5000: codec@a { + #sound-dai-cells = <0>; + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_vref_1v8>; + }; +}; + +&i2c4 { + status = "okay"; + + adc081c: adc@50 { + compatible = "ti,adc081c"; + reg = <0x50>; + vref-supply = <®_3p3v>; + }; +}; + +&ecspi3 { + ads7846@0 { + reg = <0>; + compatible = "ti,ads7846"; + interrupt-parent = <&gpio2>; + interrupts = <7 0>; + spi-max-frequency = <1000000>; + pendown-gpio = <&gpio2 7 0>; + vcc-supply = <®_3p3v>; + ti,x-min = /bits/ 16 <0>; + ti,x-max = /bits/ 16 <4095>; + ti,y-min = /bits/ 16 <0>; + ti,y-max = /bits/ 16 <4095>; + ti,pressure-max = /bits/ 16 <1024>; + ti,x-plate-ohms = /bits/ 16 <90>; + ti,y-plate-ohms = /bits/ 16 <90>; + ti,debounce-max = /bits/ 16 <70>; + ti,debounce-tol = /bits/ 16 <3>; + ti,debounce-rep = /bits/ 16 <2>; + ti,settle-delay-usec = /bits/ 16 <150>; + wakeup-source; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 + MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 + MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 + MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14 + MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14 + MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14 + MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14 + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/imx7d-pico-pi.dts index ee02d931cf49..70bea95c06d8 100644 --- a/arch/arm/boot/dts/imx7d-pico-pi.dts +++ b/arch/arm/boot/dts/imx7d-pico-pi.dts @@ -1,48 +1,24 @@ -/* - * Copyright 2017 NXP - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// +// Copyright 2017 NXP #include "imx7d-pico.dtsi" / { + model = "TechNexion PICO-IMX7D Board and PI baseboard"; + compatible = "technexion,imx7d-pico-pi", "fsl,imx7d"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + }; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "imx7-sgtl5000"; @@ -54,43 +30,14 @@ }; dailink_master: simple-audio-card,codec { - sound-dai = <&codec>; + sound-dai = <&sgtl5000>; clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; }; }; }; -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet1>; - assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, - <&clks IMX7D_ENET1_TIME_ROOT_CLK>; - assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; - assigned-clock-rates = <0>, <100000000>; - phy-mode = "rgmii"; - phy-handle = <ðphy0>; - fsl,magic-packet; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - status = "okay"; - }; - }; -}; - &i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - codec: sgtl5000@a { + sgtl5000: codec@a { #sound-dai-cells = <0>; reg = <0x0a>; compatible = "fsl,sgtl5000"; @@ -100,82 +47,47 @@ }; }; - -&sai1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai1>; - assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, - <&clks IMX7D_SAI1_ROOT_CLK>; - assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; - assigned-clock-rates = <0>, <24576000>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>; - assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; - status = "okay"; -}; - -&usbotg1 { - vbus-supply = <®_usb_otg1_vbus>; - status = "okay"; -}; - -&usbotg2 { - vbus-supply = <®_usb_otg2_vbus>; - dr_mode = "host"; - status = "okay"; +&i2c4 { + polytouch: touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupt-parent = <&gpio2>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; }; &iomuxc { - pinctrl_enet1: enet1grp { - fsl,pins = < - MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 - MX7D_PAD_SD2_WP__ENET1_MDC 0x3 - MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 - MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 - MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 - MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 - MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 - MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 - MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 - MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 - MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 - MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 - MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 - MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 - >; - }; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; - pinctrl_i2c1: i2c1grp { + pinctrl_hog: hoggrp { fsl,pins = < - MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x4000007f - MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x4000007f + MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 + MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 + MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 + MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14 + MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14 + MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14 + MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14 >; }; - pinctrl_sai1: sai1grp { + pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < - MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f - MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f - MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 - MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x14 >; }; - pinctrl_uart5: uart5grp { + pinctrl_touchscreen: touchscreengrp { fsl,pins = < - MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79 - MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79 + MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x14 + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 >; }; - pinctrl_usbotg1_pwr: usbotg_pwr { - fsl,pins = < - MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14 - >; - }; }; diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi index f27b3849d3ff..3fd595a71202 100644 --- a/arch/arm/boot/dts/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/imx7d-pico.dtsi @@ -1,62 +1,23 @@ -/* - * Copyright 2017 NXP - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// +// Copyright 2017 NXP /dts-v1/; #include "imx7d.dtsi" / { - model = "Technexion Pico i.MX7D Board"; - compatible = "technexion,imx7d-pico", "fsl,imx7d"; - + /* Will be filled by the bootloader */ memory@80000000 { - reg = <0x80000000 0x80000000>; + device_type = "memory"; + reg = <0x80000000 0>; }; - reg_ap6212: regulator-ap6212 { + reg_wlreg_on: regulator-wlreg_on { compatible = "regulator-fixed"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_ap6212>; - regulator-name = "AP6212"; + pinctrl-0 = <&pinctrl_reg_wlreg_on>; + regulator-name = "wlreg_on"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>; @@ -80,6 +41,8 @@ }; reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_pwr>; compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; regulator-min-microvolt = <5000000>; @@ -115,6 +78,63 @@ assigned-clock-rates = <0>, <32768>; }; +&ecspi3 { + cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + status = "okay"; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; @@ -210,6 +230,91 @@ }; }; +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, + <&clks IMX7D_SAI1_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <24576000>; + status = "okay"; +}; + + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { /* Backlight */ + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + uart-has-rtscts; + status = "okay"; +}; + +&uart7 { /* Bluetooth */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7>; + assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + bus-width = <4>; + tuning-step = <2>; + vmmc-supply = <®_3p3v>; + wakeup-source; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; + &usdhc2 { /* Wifi SDIO */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_wifi_clk>; @@ -217,7 +322,7 @@ non-removable; keep-power-in-suspend; wakeup-source; - vmmc-supply = <®_ap6212>; + vmmc-supply = <®_wlreg_on>; mmc-pwrseq = <&usdhc2_pwrseq>; status = "okay"; }; @@ -244,6 +349,63 @@ }; &iomuxc { + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x2 + MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x2 + MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x2 + MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x14 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x4000007f + MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_UART2_TX_DATA__I2C2_SDA 0x4000007f + MX7D_PAD_UART2_RX_DATA__I2C2_SCL 0x4000007f + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 + MX7D_PAD_SD2_WP__ENET1_MDC 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x1 /* Ethernet reset */ + >; + }; + + pinctrl_can1: can1frp { + fsl,pins = < + MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX 0x59 + MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX 0x59 + >; + }; + + pinctrl_can2: can2frp { + fsl,pins = < + MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX 0x59 + MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX 0x59 + >; + }; + pinctrl_i2c4: i2c4grp { fsl,pins = < MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f @@ -251,12 +413,106 @@ >; }; - pinctrl_reg_ap6212: regap6212grp { + pinctrl_pwm1: pwm1 { + fsl,pins = < + MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f + >; + }; + + pinctrl_pwm2: pwm2 { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f + >; + }; + + pinctrl_pwm3: pwm3 { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f + >; + }; + + pinctrl_reg_wlreg_on: regregongrp { fsl,pins = < MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x59 >; }; + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f + MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79 + MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x79 + MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x79 + MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS 0x79 + MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS 0x79 + >; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = < + MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX 0x79 + MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX 0x79 + MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS 0x79 + MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS 0x79 + >; + }; + + pinctrl_usbotg1_pwr: usbotg_pwr { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x15 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5a + MX7D_PAD_SD1_CLK__SD1_CLK 0x1a + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x15 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5b + MX7D_PAD_SD1_CLK__SD1_CLK 0x1b + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x15 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX7D_PAD_SD2_CMD__SD2_CMD 0x59 diff --git a/arch/arm/boot/dts/imx7d-sdb-reva.dts b/arch/arm/boot/dts/imx7d-sdb-reva.dts new file mode 100644 index 000000000000..7ce9d8c91985 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-sdb-reva.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright (C) 2015 Freescale Semiconductor, Inc. + +/dts-v1/; + +#include "imx7d-sdb.dts" + +/ { + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>; + gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; + }; +}; + +&fec2 { + /delete-property/phy-supply; +}; + +&iomuxc { + imx7d-sdb { + pinctrl_tsc2046_pendown: tsc2046_pendown { + fsl,pins = < + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x59 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ + >; + }; + + pinctrl_usb_otg2_vbus_reg_reva: usbotg2vbusregrevagrp { + fsl,pins = < + MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index f1bafdaa7e1a..202922ed3754 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -15,6 +15,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x80000000>; }; @@ -71,9 +72,11 @@ reg_usb_otg2_vbus: regulator-usb-otg2-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg2_vbus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg>; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -114,6 +117,16 @@ gpio = <&gpio2 14 GPIO_ACTIVE_LOW>; }; + reg_fec2_3v3: regulator-fec2-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fec2-3v3"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000 0>; @@ -210,6 +223,7 @@ assigned-clock-rates = <0>, <100000000>; phy-mode = "rgmii"; phy-handle = <ðphy1>; + phy-supply = <®_fec2_3v3>; fsl,magic-packet; status = "okay"; }; @@ -491,6 +505,12 @@ >; }; + pinctrl_enet2_reg: enet2reggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x14 + >; + }; + pinctrl_flexcan2: flexcan2grp { fsl,pins = < MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59 @@ -513,7 +533,6 @@ pinctrl_hog: hoggrp { fsl,pins = < - MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ >; }; @@ -735,4 +754,10 @@ MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x30 >; }; + + pinctrl_usb_otg2_vbus_reg: usbotg2vbusreggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 + >; + }; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 826224bf7f4f..6b298e388f4b 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -24,6 +24,15 @@ }; }; + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + cpu0_opp_table: opp-table { compatible = "operating-points-v2"; opp-shared; @@ -72,6 +81,18 @@ }; }; }; + + intc: interrupt-controller@31001000 { + compatible = "arm,cortex-a7-gic"; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + reg = <0x31001000 0x1000>, + <0x31002000 0x2000>, + <0x31004000 0x2000>, + <0x31006000 0x2000>; + }; }; }; diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi index fe8344cee864..1fb1ec5d3d70 100644 --- a/arch/arm/boot/dts/imx7s-colibri.dtsi +++ b/arch/arm/boot/dts/imx7s-colibri.dtsi @@ -45,6 +45,7 @@ / { memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x10000000>; }; }; diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index f7ba2c0a24ad..23431faecaf4 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -14,6 +14,7 @@ compatible = "warp,imx7s-warp", "fsl,imx7s"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index aa8df7d93b2e..e88f53a4c7f4 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -17,10 +17,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { gpio0 = &gpio1; @@ -162,10 +160,10 @@ timer { compatible = "arm,armv7-timer"; interrupt-parent = <&intc>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; }; soc { @@ -307,7 +305,7 @@ intc: interrupt-controller@31001000 { compatible = "arm,cortex-a7-gic"; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; #interrupt-cells = <3>; interrupt-controller; interrupt-parent = <&intc>; @@ -875,6 +873,7 @@ clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CAN1_ROOT_CLK>; clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x10 1 0x10 17>; status = "disabled"; }; @@ -885,6 +884,7 @@ clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CAN2_ROOT_CLK>; clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x10 2 0x10 18>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/imx7ulp-evk.dts new file mode 100644 index 000000000000..a09026a6d22e --- /dev/null +++ b/arch/arm/boot/dts/imx7ulp-evk.dts @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +/dts-v1/; + +#include "imx7ulp.dtsi" + +/ { + model = "NXP i.MX7ULP EVK"; + compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp"; + + chosen { + stdout-path = &lpuart4; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + reg_vsd_3v3: regulator-vsd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc0_rst>; + gpio = <&gpio_ptd 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&lpuart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart4>; + status = "okay"; +}; + +&usdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc0>; + cd-gpios = <&gpio_ptc 10 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_vsd_3v3>; + status = "okay"; +}; + +&iomuxc1 { + pinctrl_lpuart4: lpuart4grp { + fsl,pins = < + IMX7ULP_PAD_PTC3__LPUART4_RX 0x3 + IMX7ULP_PAD_PTC2__LPUART4_TX 0x3 + >; + bias-pull-up; + }; + + pinctrl_usdhc0: usdhc0grp { + fsl,pins = < + IMX7ULP_PAD_PTD1__SDHC0_CMD 0x43 + IMX7ULP_PAD_PTD2__SDHC0_CLK 0x40 + IMX7ULP_PAD_PTD7__SDHC0_D3 0x43 + IMX7ULP_PAD_PTD8__SDHC0_D2 0x43 + IMX7ULP_PAD_PTD9__SDHC0_D1 0x43 + IMX7ULP_PAD_PTD10__SDHC0_D0 0x43 + IMX7ULP_PAD_PTC10__PTC10 0x3 /* CD */ + >; + }; + + pinctrl_usdhc0_rst: usdhc0-gpio-rst-grp { + fsl,pins = < + IMX7ULP_PAD_PTD0__PTD0 0x3 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi new file mode 100644 index 000000000000..931b2754b099 --- /dev/null +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -0,0 +1,346 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/clock/imx7ulp-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "imx7ulp-pinfunc.h" + +/ { + interrupt-parent = <&intc>; + + #address-cells = <1>; + #size-cells = <1>; + + aliases { + gpio0 = &gpio_ptc; + gpio1 = &gpio_ptd; + gpio2 = &gpio_pte; + gpio3 = &gpio_ptf; + i2c0 = &lpi2c6; + i2c1 = &lpi2c7; + mmc0 = &usdhc0; + mmc1 = &usdhc1; + serial0 = &lpuart4; + serial1 = &lpuart5; + serial2 = &lpuart6; + serial3 = &lpuart7; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + }; + + intc: interrupt-controller@40021000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x40021000 0x1000>, + <0x40022000 0x1000>; + }; + + rosc: clock-rosc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "rosc"; + #clock-cells = <0>; + }; + + sosc: clock-sosc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "sosc"; + #clock-cells = <0>; + }; + + sirc: clock-sirc { + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-output-names = "sirc"; + #clock-cells = <0>; + }; + + firc: clock-firc { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + clock-output-names = "firc"; + #clock-cells = <0>; + }; + + upll: clock-upll { + compatible = "fixed-clock"; + clock-frequency = <480000000>; + clock-output-names = "upll"; + #clock-cells = <0>; + }; + + mpll: clock-mpll { + compatible = "fixed-clock"; + clock-frequency = <480000000>; + clock-output-names = "mpll"; + #clock-cells = <0>; + }; + + ahbbridge0: bus@40000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x800000>; + ranges; + + lpuart4: serial@402d0000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x402d0000 0x1000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_LPUART4>; + clock-names = "ipg"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART4>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; + assigned-clock-rates = <24000000>; + status = "disabled"; + }; + + lpuart5: serial@402e0000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x402e0000 0x1000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_LPUART5>; + clock-names = "ipg"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART5>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + tpm5: tpm@40260000 { + compatible = "fsl,imx7ulp-tpm"; + reg = <0x40260000 0x1000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&pcc2 IMX7ULP_CLK_LPTPM5>; + clock-names = "ipg", "per"; + }; + + usdhc0: mmc@40370000 { + compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x40370000 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&pcc2 IMX7ULP_CLK_USDHC0>; + clock-names ="ipg", "ahb", "per"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc1: mmc@40380000 { + compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x40380000 0x10000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&pcc2 IMX7ULP_CLK_USDHC1>; + clock-names ="ipg", "ahb", "per"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC1>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + scg1: clock-controller@403e0000 { + compatible = "fsl,imx7ulp-scg1"; + reg = <0x403e0000 0x10000>; + clocks = <&rosc>, <&sosc>, <&sirc>, + <&firc>, <&upll>, <&mpll>; + clock-names = "rosc", "sosc", "sirc", + "firc", "upll", "mpll"; + #clock-cells = <1>; + }; + + pcc2: clock-controller@403f0000 { + compatible = "fsl,imx7ulp-pcc2"; + reg = <0x403f0000 0x10000>; + #clock-cells = <1>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&scg1 IMX7ULP_CLK_DDR_DIV>, + <&scg1 IMX7ULP_CLK_APLL_PFD2>, + <&scg1 IMX7ULP_CLK_APLL_PFD1>, + <&scg1 IMX7ULP_CLK_APLL_PFD0>, + <&scg1 IMX7ULP_CLK_UPLL>, + <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_MIPI_PLL>, + <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_ROSC>, + <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; + clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", + "apll_pfd2", "apll_pfd1", "apll_pfd0", + "upll", "sosc_bus_clk", "mpll", + "firc_bus_clk", "rosc", "spll_bus_clk"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM5>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; + }; + + smc1: smc1@40410000 { + compatible = "fsl,imx7ulp-smc1"; + reg = <0x40410000 0x1000>; + }; + + pcc3: clock-controller@40b30000 { + compatible = "fsl,imx7ulp-pcc3"; + reg = <0x40b30000 0x10000>; + #clock-cells = <1>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&scg1 IMX7ULP_CLK_DDR_DIV>, + <&scg1 IMX7ULP_CLK_APLL_PFD2>, + <&scg1 IMX7ULP_CLK_APLL_PFD1>, + <&scg1 IMX7ULP_CLK_APLL_PFD0>, + <&scg1 IMX7ULP_CLK_UPLL>, + <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_MIPI_PLL>, + <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_ROSC>, + <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; + clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", + "apll_pfd2", "apll_pfd1", "apll_pfd0", + "upll", "sosc_bus_clk", "mpll", + "firc_bus_clk", "rosc", "spll_bus_clk"; + }; + }; + + ahbbridge1: bus@40800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40800000 0x800000>; + ranges; + + lpi2c6: i2c@40a40000 { + compatible = "fsl,imx7ulp-lpi2c"; + reg = <0x40a40000 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>; + clock-names = "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpi2c7: i2c@40a50000 { + compatible = "fsl,imx7ulp-lpi2c"; + reg = <0x40a50000 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>; + clock-names = "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpuart6: serial@40a60000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x40a60000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX7ULP_CLK_LPUART6>; + clock-names = "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART6>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpuart7: serial@40a70000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x40a70000 0x1000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX7ULP_CLK_LPUART7>; + clock-names = "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART7>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + iomuxc1: pinctrl@40ac0000 { + compatible = "fsl,imx7ulp-iomuxc1"; + reg = <0x40ac0000 0x1000>; + }; + + gpio_ptc: gpio@40ae0000 { + compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; + reg = <0x40ae0000 0x1000 0x400f0000 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLC>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 0 32>; + }; + + gpio_ptd: gpio@40af0000 { + compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; + reg = <0x40af0000 0x1000 0x400f0040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLD>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 32 32>; + }; + + gpio_pte: gpio@40b00000 { + compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; + reg = <0x40b00000 0x1000 0x400f0080 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLE>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 64 32>; + }; + + gpio_ptf: gpio@40b10000 { + compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; + reg = <0x40b10000 0x1000 0x400f00c0 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLF>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 96 32>; + }; + }; +}; diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index ca9154dd8052..e2b1ab9b56e5 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -116,6 +116,10 @@ status = "okay"; }; +&cmt0 { + status = "okay"; +}; + &hsusb { status = "okay"; pinctrl-0 = <&usb0_pins>; @@ -230,6 +234,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts index d01f64b252b1..6a83f30029ea 100644 --- a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts +++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts @@ -203,9 +203,6 @@ }; &qspi { - bus-num = <0>; - fsl,spi-num-chipselects = <2>; - fsl,spi-flash-chipselects = <0>; fsl,qspi-has-second-chip; status = "okay"; @@ -214,6 +211,8 @@ #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; partitions@0 { diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index bdd6e66a79ad..ed0941292172 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -324,6 +324,8 @@ trip = <&cpu_alert>; cooling-device = <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; @@ -525,6 +527,102 @@ status = "disabled"; }; + pwm0: pwm@29d0000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x29d0000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm1: pwm@29e0000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x29e0000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm2: pwm@29f0000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x29f0000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm3: pwm@2a00000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x2a00000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm4: pwm@2a10000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x2a10000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm5: pwm@2a20000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x2a20000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm6: pwm@2a30000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x2a30000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm7: pwm@2a40000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x2a40000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + wdog0: watchdog@2ad0000 { compatible = "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; @@ -716,7 +814,7 @@ }; pcie@3400000 { - compatible = "fsl,ls1021a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls1021a-pcie"; reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -736,10 +834,11 @@ <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; pcie@3500000 { - compatible = "fsl,ls1021a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls1021a-pcie"; reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -759,6 +858,7 @@ <0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; can0: can@2a70000 { @@ -812,5 +912,25 @@ #size-cells = <1>; ranges = <0x0 0x0 0x10010000 0x10000>; }; + + qdma: dma-controller@8390000 { + compatible = "fsl,ls1021a-qdma"; + reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8389000 0x0 0x1000>, /* Status regs */ + <0x0 0x838a000 0x0 0x2000>; /* Block regs */ + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "qdma-error", + "qdma-queue0", "qdma-queue1"; + dma-channels = <8>; + block-number = <1>; + block-offset = <0x1000>; + fsl,dma-queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + big-endian; + }; + }; }; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 0d9faf1a51ea..e4645f612712 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -59,14 +59,6 @@ cache-level = <2>; }; - gic: interrupt-controller@c4301000 { - compatible = "arm,cortex-a9-gic"; - reg = <0xc4301000 0x1000>, - <0xc4300100 0x0100>; - interrupt-controller; - #interrupt-cells = <3>; - }; - soc { compatible = "simple-bus"; #address-cells = <1>; @@ -197,10 +189,29 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; }; - timer@9940 { + timer_abcde: timer@9940 { compatible = "amlogic,meson6-timer"; reg = <0x9940 0x18>; - interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>; + }; + }; + + periph: bus@c4300000 { + compatible = "simple-bus"; + reg = <0xc4300000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc4300000 0x10000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a9-gic"; + reg = <0x1000 0x1000>, + <0x100 0x100>; + interrupt-controller; + #interrupt-cells = <3>; }; }; diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts index 9444b0d9628f..fc48cff71ddf 100644 --- a/arch/arm/boot/dts/meson6-atv1200.dts +++ b/arch/arm/boot/dts/meson6-atv1200.dts @@ -56,6 +56,10 @@ serial0 = &uart_AO; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x40000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi index 9b463211339f..ca978ab952cd 100644 --- a/arch/arm/boot/dts/meson6.dtsi +++ b/arch/arm/boot/dts/meson6.dtsi @@ -88,6 +88,11 @@ status = "disabled"; }; +&timer_abcde { + clocks = <&xtal>, <&clk81>; + clock-names = "xtal", "pclk"; +}; + &uart_AO { clocks = <&xtal>, <&clk81>, <&clk81>; clock-names = "xtal", "pclk", "baud"; diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts index 8bceb8d343f6..55fb090a40ef 100644 --- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts +++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts @@ -52,6 +52,10 @@ serial0 = &uart_AO; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x40000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 7162e0ca05b0..e5cd325d7ea8 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -64,6 +64,8 @@ reg = <0x200>; enable-method = "amlogic,meson8-smp"; resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; }; cpu1: cpu@201 { @@ -73,6 +75,8 @@ reg = <0x201>; enable-method = "amlogic,meson8-smp"; resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; }; cpu2: cpu@202 { @@ -82,6 +86,8 @@ reg = <0x202>; enable-method = "amlogic,meson8-smp"; resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; }; cpu3: cpu@203 { @@ -91,6 +97,72 @@ reg = <0x203>; enable-method = "amlogic,meson8-smp"; resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; + }; + }; + + cpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-96000000 { + opp-hz = /bits/ 64 <96000000>; + opp-microvolt = <825000>; + }; + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + opp-microvolt = <825000>; + }; + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <825000>; + }; + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <825000>; + }; + opp-504000000 { + opp-hz = /bits/ 64 <504000000>; + opp-microvolt = <825000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <850000>; + }; + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <850000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <875000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <925000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <975000>; + }; + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1025000>; + }; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <1100000>; + }; + opp-1800000000 { + status = "disabled"; + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1125000>; + }; + opp-1992000000 { + status = "disabled"; + opp-hz = /bits/ 64 <1992000000>; + opp-microvolt = <1150000>; }; }; @@ -129,11 +201,6 @@ no-map; }; }; - - scu@c4300000 { - compatible = "arm,cortex-a9-scu"; - reg = <0xc4300000 0x100>; - }; }; /* end of / */ &aobus { @@ -163,6 +230,7 @@ mux { groups = "uart_tx_ao_a", "uart_rx_ao_a"; function = "uart_ao"; + bias-disable; }; }; @@ -170,6 +238,7 @@ mux { groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao"; function = "i2c_mst_ao"; + bias-disable; }; }; @@ -177,6 +246,7 @@ mux { groups = "remote_input"; function = "remote"; + bias-disable; }; }; @@ -184,6 +254,7 @@ mux { groups = "pwm_f_ao"; function = "pwm_f_ao"; + bias-disable; }; }; }; @@ -238,6 +309,7 @@ groups = "sd_d0_a", "sd_d1_a", "sd_d2_a", "sd_d3_a", "sd_clk_a", "sd_cmd_a"; function = "sd_a"; + bias-disable; }; }; @@ -246,6 +318,7 @@ groups = "sd_d0_b", "sd_d1_b", "sd_d2_b", "sd_d3_b", "sd_clk_b", "sd_cmd_b"; function = "sd_b"; + bias-disable; }; }; @@ -254,6 +327,7 @@ groups = "sd_d0_c", "sd_d1_c", "sd_d2_c", "sd_d3_c", "sd_clk_c", "sd_cmd_c"; function = "sd_c"; + bias-disable; }; }; @@ -261,6 +335,7 @@ mux { groups = "nor_d", "nor_q", "nor_c", "nor_cs"; function = "nor"; + bias-disable; }; }; @@ -272,6 +347,7 @@ "eth_rxd1", "eth_rxd0", "eth_mdio", "eth_mdc"; function = "ethernet"; + bias-disable; }; }; @@ -279,6 +355,7 @@ mux { groups = "pwm_e"; function = "pwm_e"; + bias-disable; }; }; @@ -287,6 +364,7 @@ groups = "uart_tx_a1", "uart_rx_a1"; function = "uart_a"; + bias-disable; }; }; @@ -295,6 +373,7 @@ groups = "uart_cts_a1", "uart_rts_a1"; function = "uart_a"; + bias-disable; }; }; }; @@ -350,6 +429,33 @@ arm,shared-override; }; +&periph { + scu@0 { + compatible = "arm,cortex-a9-scu"; + reg = <0x0 0x100>; + }; + + timer@200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x200 0x20>; + interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + clocks = <&clkc CLKID_PERIPH>; + + /* + * the arm_global_timer driver currently does not handle clock + * rate changes. Keep it disabled for now. + */ + status = "disabled"; + }; + + timer@600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + clocks = <&clkc CLKID_PERIPH>; + }; +}; + &pwm_ab { compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; }; @@ -375,6 +481,11 @@ clocks = <&clkc CLKID_CLK81>; }; +&timer_abcde { + clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk"; +}; + &uart_AO { compatible = "amlogic,meson8-uart", "amlogic,meson-uart"; clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>; diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts index c7fdaeabbe7b..5c9b76af8d42 100644 --- a/arch/arm/boot/dts/meson8b-mxq.dts +++ b/arch/arm/boot/dts/meson8b-mxq.dts @@ -55,6 +55,10 @@ serial0 = &uart_AO; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x40000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index cd1ca9dda126..22d775460767 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -62,6 +62,8 @@ reg = <0x200>; enable-method = "amlogic,meson8b-smp"; resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; }; cpu1: cpu@201 { @@ -71,6 +73,8 @@ reg = <0x201>; enable-method = "amlogic,meson8b-smp"; resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; }; cpu2: cpu@202 { @@ -80,6 +84,8 @@ reg = <0x202>; enable-method = "amlogic,meson8b-smp"; resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; }; cpu3: cpu@203 { @@ -89,6 +95,66 @@ reg = <0x203>; enable-method = "amlogic,meson8b-smp"; resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; + }; + }; + + cpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-96000000 { + opp-hz = /bits/ 64 <96000000>; + opp-microvolt = <860000>; + }; + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + opp-microvolt = <860000>; + }; + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <860000>; + }; + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <860000>; + }; + opp-504000000 { + opp-hz = /bits/ 64 <504000000>; + opp-microvolt = <860000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <860000>; + }; + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <860000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <900000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1140000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1140000>; + }; + opp-1320000000 { + opp-hz = /bits/ 64 <1320000000>; + opp-microvolt = <1140000>; + }; + opp-1488000000 { + opp-hz = /bits/ 64 <1488000000>; + opp-microvolt = <1140000>; + }; + opp-1536000000 { + opp-hz = /bits/ 64 <1536000000>; + opp-microvolt = <1140000>; }; }; @@ -112,11 +178,6 @@ no-map; }; }; - - scu@c4300000 { - compatible = "arm,cortex-a5-scu"; - reg = <0xc4300000 0x100>; - }; }; /* end of / */ &aobus { @@ -146,6 +207,7 @@ mux { groups = "uart_tx_ao_a", "uart_rx_ao_a"; function = "uart_ao"; + bias-disable; }; }; @@ -153,6 +215,7 @@ mux { groups = "remote_input"; function = "remote"; + bias-disable; }; }; }; @@ -220,6 +283,7 @@ "eth_txd2", "eth_txd3"; function = "ethernet"; + bias-disable; }; }; @@ -235,6 +299,7 @@ "eth_mdio_en", "eth_mdc"; function = "ethernet"; + bias-disable; }; }; @@ -242,6 +307,7 @@ mux { groups = "i2c_sda_a", "i2c_sck_a"; function = "i2c_a"; + bias-disable; }; }; @@ -250,6 +316,7 @@ groups = "sd_d0_b", "sd_d1_b", "sd_d2_b", "sd_d3_b", "sd_clk_b", "sd_cmd_b"; function = "sd_b"; + bias-disable; }; }; @@ -257,6 +324,7 @@ mux { groups = "pwm_c1"; function = "pwm_c"; + bias-disable; }; }; @@ -265,6 +333,7 @@ groups = "uart_tx_b0", "uart_rx_b0"; function = "uart_b"; + bias-disable; }; }; @@ -273,6 +342,7 @@ groups = "uart_cts_b0", "uart_rts_b0"; function = "uart_b"; + bias-disable; }; }; }; @@ -340,6 +410,33 @@ arm,shared-override; }; +&periph { + scu@0 { + compatible = "arm,cortex-a5-scu"; + reg = <0x0 0x100>; + }; + + timer@200 { + compatible = "arm,cortex-a5-global-timer"; + reg = <0x200 0x20>; + interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + clocks = <&clkc CLKID_PERIPH>; + + /* + * the arm_global_timer driver currently does not handle clock + * rate changes. Keep it disabled for now. + */ + status = "disabled"; + }; + + timer@600 { + compatible = "arm,cortex-a5-twd-timer"; + reg = <0x600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + clocks = <&clkc CLKID_PERIPH>; + }; +}; + &pwm_ab { compatible = "amlogic,meson8b-pwm"; }; @@ -361,6 +458,11 @@ clock-names = "core", "clkin"; }; +&timer_abcde { + clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk"; +}; + &uart_AO { compatible = "amlogic,meson8b-uart", "amlogic,meson-uart"; clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>; diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/meson8m2.dtsi index 3e1f92273d7b..d1a28c2adac5 100644 --- a/arch/arm/boot/dts/meson8m2.dtsi +++ b/arch/arm/boot/dts/meson8m2.dtsi @@ -45,6 +45,7 @@ "eth_rxd1", "eth_rxd0", "eth_mdio", "eth_mdc"; function = "ethernet"; + bias-disable; }; }; }; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 766bbb8495b6..ee03e0846740 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -117,6 +117,60 @@ reg-names = "mux status", "mux mask"; mrvl,intc-nr-irqs = <2>; }; + + usb_otg_phy0: usb-otg-phy@d4207000 { + compatible = "marvell,mmp2-usb-phy"; + reg = <0xd4207000 0x40>; + #phy-cells = <0>; + status = "disabled"; + }; + + usb_otg0: usb-otg@d4208000 { + compatible = "marvell,pxau2o-ehci"; + reg = <0xd4208000 0x200>; + interrupts = <44>; + clocks = <&soc_clocks MMP2_CLK_USB>; + clock-names = "USBCLK"; + phys = <&usb_otg_phy0>; + phy-names = "usb"; + status = "disabled"; + }; + + mmc1: mmc@d4280000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4280000 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH0>; + clock-names = "io"; + interrupts = <39>; + status = "disabled"; + }; + + mmc2: mmc@d4280800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4280800 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH1>; + clock-names = "io"; + interrupts = <52>; + status = "disabled"; + }; + + mmc3: mmc@d4281000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4281000 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH2>; + clock-names = "io"; + interrupts = <53>; + status = "disabled"; + }; + + mmc4: mmc@d4281800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4281800 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH3>; + clock-names = "io"; + interrupts = <54>; + status = "disabled"; + }; }; apb@d4000000 { /* APB */ @@ -130,6 +184,7 @@ compatible = "mrvl,mmp-timer"; reg = <0xd4014000 0x100>; interrupts = <13>; + clocks = <&soc_clocks MMP2_CLK_TIMER>; }; uart1: uart@d4030000 { @@ -168,7 +223,7 @@ status = "disabled"; }; - gpio@d4019000 { + gpio: gpio@d4019000 { compatible = "marvell,mmp2-gpio"; #address-cells = <1>; #size-cells = <1>; @@ -180,7 +235,7 @@ clocks = <&soc_clocks MMP2_CLK_GPIO>; resets = <&soc_clocks MMP2_CLK_GPIO>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; ranges; gcb0: gpio@d4019000 { @@ -220,12 +275,64 @@ status = "disabled"; }; - twsi2: i2c@d4025000 { + twsi2: i2c@d4031000 { compatible = "mrvl,mmp-twsi"; - reg = <0xd4025000 0x1000>; - interrupts = <58>; + reg = <0xd4031000 0x1000>; + interrupt-parent = <&intcmux17>; + interrupts = <0>; clocks = <&soc_clocks MMP2_CLK_TWSI1>; resets = <&soc_clocks MMP2_CLK_TWSI1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + twsi3: i2c@d4032000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4032000 0x1000>; + interrupt-parent = <&intcmux17>; + interrupts = <1>; + clocks = <&soc_clocks MMP2_CLK_TWSI2>; + resets = <&soc_clocks MMP2_CLK_TWSI2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + twsi4: i2c@d4033000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4033000 0x1000>; + interrupt-parent = <&intcmux17>; + interrupts = <2>; + clocks = <&soc_clocks MMP2_CLK_TWSI3>; + resets = <&soc_clocks MMP2_CLK_TWSI3>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + + twsi5: i2c@d4033800 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4033800 0x1000>; + interrupt-parent = <&intcmux17>; + interrupts = <3>; + clocks = <&soc_clocks MMP2_CLK_TWSI4>; + resets = <&soc_clocks MMP2_CLK_TWSI4>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + twsi6: i2c@d4034000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4034000 0x1000>; + interrupt-parent = <&intcmux17>; + interrupts = <4>; + clocks = <&soc_clocks MMP2_CLK_TWSI5>; + resets = <&soc_clocks MMP2_CLK_TWSI5>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -239,6 +346,38 @@ resets = <&soc_clocks MMP2_CLK_RTC>; status = "disabled"; }; + + ssp1: ssp@d4035000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4035000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP0>; + interrupts = <0>; + status = "disabled"; + }; + + ssp2: ssp@d4036000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4036000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP1>; + interrupts = <1>; + status = "disabled"; + }; + + ssp3: ssp@d4037000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4037000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP2>; + interrupts = <20>; + status = "disabled"; + }; + + ssp4: ssp@d4039000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4039000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP3>; + interrupts = <21>; + status = "disabled"; + }; }; soc_clocks: clocks{ diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index d5fe55392230..e53d32691308 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -382,7 +382,7 @@ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */ /* mcbsp_clks is used as PENIRQ */ - /* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp_clks */ + /* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0) mcbsp_clks.mcbsp_clks */ OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */ OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */ >; diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index 6eb26b837446..5059ecac4478 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -196,12 +196,12 @@ clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x58000 0x4000>; + ranges = <0x0 0x58000 0x5000>; hsi: hsi@0 { compatible = "ti,omap4-hsi"; reg = <0x0 0x4000>, - <0x4a05c000 0x1000>; + <0x5000 0x1000>; reg-names = "sys", "gdd"; clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>; diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi new file mode 100644 index 000000000000..9c7e309d9c2c --- /dev/null +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -0,0 +1,2462 @@ +&l4_cfg { /* 0x4a000000 */ + compatible = "ti,omap5-l4-cfg", "simple-bus"; + reg = <0x4a000000 0x800>, + <0x4a000800 0x800>, + <0x4a001000 0x1000>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4a000000 0x080000>, /* segment 0 */ + <0x00080000 0x4a080000 0x080000>, /* segment 1 */ + <0x00100000 0x4a100000 0x080000>, /* segment 2 */ + <0x00180000 0x4a180000 0x080000>, /* segment 3 */ + <0x00200000 0x4a200000 0x080000>, /* segment 4 */ + <0x00280000 0x4a280000 0x080000>, /* segment 5 */ + <0x00300000 0x4a300000 0x080000>; /* segment 6 */ + + segment@0 { /* 0x4a000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x001000>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00002000 0x00002000 0x001000>, /* ap 3 */ + <0x00003000 0x00003000 0x001000>, /* ap 4 */ + <0x00004000 0x00004000 0x001000>, /* ap 5 */ + <0x00005000 0x00005000 0x001000>, /* ap 6 */ + <0x00056000 0x00056000 0x001000>, /* ap 7 */ + <0x00057000 0x00057000 0x001000>, /* ap 8 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 9 */ + <0x00058000 0x00058000 0x001000>, /* ap 10 */ + <0x00062000 0x00062000 0x001000>, /* ap 11 */ + <0x00063000 0x00063000 0x001000>, /* ap 12 */ + <0x00008000 0x00008000 0x002000>, /* ap 21 */ + <0x0000a000 0x0000a000 0x001000>, /* ap 22 */ + <0x00066000 0x00066000 0x001000>, /* ap 23 */ + <0x00067000 0x00067000 0x001000>, /* ap 24 */ + <0x0005e000 0x0005e000 0x002000>, /* ap 69 */ + <0x00060000 0x00060000 0x001000>, /* ap 70 */ + <0x00064000 0x00064000 0x001000>, /* ap 71 */ + <0x00065000 0x00065000 0x001000>, /* ap 72 */ + <0x0005a000 0x0005a000 0x001000>, /* ap 77 */ + <0x0005b000 0x0005b000 0x001000>, /* ap 78 */ + <0x00070000 0x00070000 0x004000>, /* ap 79 */ + <0x00074000 0x00074000 0x001000>, /* ap 80 */ + <0x00075000 0x00075000 0x001000>, /* ap 81 */ + <0x00076000 0x00076000 0x001000>, /* ap 82 */ + <0x00020000 0x00020000 0x020000>, /* ap 109 */ + <0x00040000 0x00040000 0x001000>, /* ap 110 */ + <0x00059000 0x00059000 0x001000>; /* ap 111 */ + + target-module@2000 { /* 0x4a002000, ap 3 44.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x2000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + + scm_core: scm@0 { + compatible = "ti,omap5-scm-core", "simple-bus"; + reg = <0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x800>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + + scm_padconf_core: scm@800 { + compatible = "ti,omap5-scm-padconf-core", + "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x800 0x800>; + + omap5_pmx_core: pinmux@40 { + compatible = "ti,omap5-padconf", + "pinctrl-single"; + reg = <0x40 0x01b6>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap5_padconf_global: omap5_padconf_global@5a0 { + compatible = "syscon", + "simple-bus"; + reg = <0x5a0 0xec>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5a0 0xec>; + + pbias_regulator: pbias_regulator@60 { + compatible = "ti,pbias-omap5", "ti,pbias-omap"; + reg = <0x60 0x4>; + syscon = <&omap5_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + }; + }; + + target-module@4000 { /* 0x4a004000, ap 5 5c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x4000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + cm_core_aon: cm_core_aon@0 { + compatible = "ti,omap5-cm-core-aon", + "simple-bus"; + reg = <0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + + cm_core_aon_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_core_aon_clockdomains: clockdomains { + }; + }; + }; + + target-module@8000 { /* 0x4a008000, ap 21 4c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x8000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x2000>; + + cm_core: cm_core@0 { + compatible = "ti,omap5-cm-core", "simple-bus"; + reg = <0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + cm_core_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_core_clockdomains: clockdomains { + }; + }; + }; + + target-module@20000 { /* 0x4a020000, ap 109 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_otg_ss"; + reg = <0x20000 0x4>, + <0x20010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x20000>; + + usb3: omap_dwc3@0 { + compatible = "ti,dwc3"; + reg = <0x0 0x10000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges = <0 0 0x20000>; + dwc3: dwc3@10000 { + compatible = "snps,dwc3"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; + phys = <&usb2_phy>, <&usb3_phy>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "peripheral"; + }; + }; + }; + + target-module@56000 { /* 0x4a056000, ap 7 02.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "dma_system"; + reg = <0x56000 0x4>, + <0x5602c 0x4>, + <0x56028 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, dma_clkdm */ + clocks = <&dma_clkctrl OMAP5_DMA_SYSTEM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x56000 0x1000>; + + sdma: dma-controller@0 { + compatible = "ti,omap4430-sdma"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <32>; + dma-requests = <127>; + }; + }; + + target-module@58000 { /* 0x4a058000, ap 10 06.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00058000 0x00001000>, + <0x00001000 0x00059000 0x00001000>, + <0x00002000 0x0005a000 0x00001000>, + <0x00003000 0x0005b000 0x00001000>; + }; + + target-module@5e000 { /* 0x4a05e000, ap 69 2a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5e000 0x2000>; + }; + + target-module@62000 { /* 0x4a062000, ap 11 0e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "usb_tll_hs"; + reg = <0x62000 0x4>, + <0x62010 0x4>, + <0x62014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_USB_TLL_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x62000 0x1000>; + + usbhstll: usbhstll@0 { + compatible = "ti,usbhs-tll"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@64000 { /* 0x4a064000, ap 71 1e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_host_hs"; + reg = <0x64000 0x4>, + <0x64010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_USB_HOST_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x64000 0x1000>; + + usbhshost: usbhshost@0 { + compatible = "ti,usbhs-host"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + clocks = <&l3init_60m_fclk>, + <&xclk60mhsp1_ck>, + <&xclk60mhsp2_ck>; + clock-names = "refclk_60m_int", + "refclk_60m_ext_p1", + "refclk_60m_ext_p2"; + + usbhsohci: ohci@800 { + compatible = "ti,ohci-omap3"; + reg = <0x800 0x400>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + remote-wakeup-connected; + }; + + usbhsehci: ehci@c00 { + compatible = "ti,ehci-omap"; + reg = <0xc00 0x400>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + + target-module@66000 { /* 0x4a066000, ap 23 0a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mmu_dsp"; + reg = <0x66000 0x4>, + <0x66010 0x4>, + <0x66014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): mm, dsp_pwrdm, dsp_clkdm */ + clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x66000 0x1000>; + + /* mmu_dsp cannot be moved before reset driver */ + status = "disabled"; + }; + + target-module@70000 { /* 0x4a070000, ap 79 2e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x70000 0x4000>; + }; + + target-module@75000 { /* 0x4a075000, ap 81 32.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x75000 0x1000>; + }; + }; + + segment@80000 { /* 0x4a080000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */ + <0x0005a000 0x000da000 0x001000>, /* ap 14 */ + <0x0005b000 0x000db000 0x001000>, /* ap 15 */ + <0x0005c000 0x000dc000 0x001000>, /* ap 16 */ + <0x0005d000 0x000dd000 0x001000>, /* ap 17 */ + <0x0005e000 0x000de000 0x001000>, /* ap 18 */ + <0x00060000 0x000e0000 0x001000>, /* ap 19 */ + <0x00061000 0x000e1000 0x001000>, /* ap 20 */ + <0x00074000 0x000f4000 0x001000>, /* ap 25 */ + <0x00075000 0x000f5000 0x001000>, /* ap 26 */ + <0x00076000 0x000f6000 0x001000>, /* ap 27 */ + <0x00077000 0x000f7000 0x001000>, /* ap 28 */ + <0x00036000 0x000b6000 0x001000>, /* ap 65 */ + <0x00037000 0x000b7000 0x001000>, /* ap 66 */ + <0x0004d000 0x000cd000 0x001000>, /* ap 67 */ + <0x0004e000 0x000ce000 0x001000>, /* ap 68 */ + <0x00000000 0x00080000 0x004000>, /* ap 83 */ + <0x00004000 0x00084000 0x001000>, /* ap 84 */ + <0x00005000 0x00085000 0x001000>, /* ap 85 */ + <0x00006000 0x00086000 0x001000>, /* ap 86 */ + <0x00007000 0x00087000 0x001000>, /* ap 87 */ + <0x00008000 0x00088000 0x001000>, /* ap 88 */ + <0x00010000 0x00090000 0x004000>, /* ap 89 */ + <0x00014000 0x00094000 0x001000>, /* ap 90 */ + <0x00015000 0x00095000 0x001000>, /* ap 91 */ + <0x00016000 0x00096000 0x001000>, /* ap 92 */ + <0x00017000 0x00097000 0x001000>, /* ap 93 */ + <0x00018000 0x00098000 0x001000>, /* ap 94 */ + <0x00020000 0x000a0000 0x004000>, /* ap 95 */ + <0x00024000 0x000a4000 0x001000>, /* ap 96 */ + <0x00025000 0x000a5000 0x001000>, /* ap 97 */ + <0x00026000 0x000a6000 0x001000>, /* ap 98 */ + <0x00027000 0x000a7000 0x001000>, /* ap 99 */ + <0x00028000 0x000a8000 0x001000>; /* ap 100 */ + + target-module@0 { /* 0x4a080000, ap 83 28.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "ocp2scp1"; + reg = <0x0 0x4>, + <0x10 0x4>, + <0x14 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_OCP2SCP1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x00004000>, + <0x00004000 0x00004000 0x00001000>, + <0x00005000 0x00005000 0x00001000>, + <0x00006000 0x00006000 0x00001000>, + <0x00007000 0x00007000 0x00001000>; + + ocp2scp@0 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x20>; + }; + + usb2_phy: usb2phy@4000 { + compatible = "ti,omap-usb2"; + reg = <0x4000 0x7c>; + syscon-phy-power = <&scm_conf 0x300>; + clocks = <&usb_phy_cm_clk32k>, + <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + }; + + usb3_phy: usb3phy@4400 { + compatible = "ti,omap-usb3"; + reg = <0x4400 0x80>, + <0x4800 0x64>, + <0x4c00 0x40>; + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + syscon-phy-power = <&scm_conf 0x370>; + clocks = <&usb_phy_cm_clk32k>, + <&sys_clkin>, + <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>; + clock-names = "wkupclk", + "sysclk", + "refclk"; + #phy-cells = <0>; + }; + }; + + target-module@10000 { /* 0x4a090000, ap 89 36.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "ocp2scp3"; + reg = <0x10000 0x4>, + <0x10010 0x4>, + <0x10014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_OCP2SCP3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00010000 0x00004000>, + <0x00004000 0x00014000 0x00001000>, + <0x00005000 0x00015000 0x00001000>, + <0x00006000 0x00016000 0x00001000>, + <0x00007000 0x00017000 0x00001000>; + + ocp2scp@0 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x20>; + }; + + sata_phy: phy@6000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x6000 0x80>, /* phy_rx */ + <0x6400 0x64>, /* phy_tx */ + <0x6800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + syscon-phy-power = <&scm_conf 0x374>; + clocks = <&sys_clkin>, + <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>; + clock-names = "sysclk", "refclk"; + #phy-cells = <0>; + }; + }; + + target-module@20000 { /* 0x4a0a0000, ap 95 50.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00020000 0x00004000>, + <0x00004000 0x00024000 0x00001000>, + <0x00005000 0x00025000 0x00001000>, + <0x00006000 0x00026000 0x00001000>, + <0x00007000 0x00027000 0x00001000>; + }; + + target-module@36000 { /* 0x4a0b6000, ap 65 6c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + }; + + target-module@4d000 { /* 0x4a0cd000, ap 67 64.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4d000 0x1000>; + }; + + target-module@59000 { /* 0x4a0d9000, ap 13 20.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000 0x1000>; + }; + + target-module@5b000 { /* 0x4a0db000, ap 15 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + }; + + target-module@5d000 { /* 0x4a0dd000, ap 17 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + }; + + target-module@60000 { /* 0x4a0e0000, ap 19 54.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + }; + + target-module@74000 { /* 0x4a0f4000, ap 25 04.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox"; + reg = <0x74000 0x4>, + <0x74010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl OMAP5_MAILBOX_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x74000 0x1000>; + + mailbox: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + mbox_ipu: mbox_ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; + }; + }; + + target-module@76000 { /* 0x4a0f6000, ap 27 0c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spinlock"; + reg = <0x76000 0x4>, + <0x76010 0x4>, + <0x76014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl OMAP5_SPINLOCK_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x76000 0x1000>; + + hwspinlock: spinlock@0 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x0 0x1000>; + #hwlock-cells = <1>; + }; + }; + }; + + segment@100000 { /* 0x4a100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00002000 0x00102000 0x001000>, /* ap 59 */ + <0x00003000 0x00103000 0x001000>, /* ap 60 */ + <0x00008000 0x00108000 0x001000>, /* ap 61 */ + <0x00009000 0x00109000 0x001000>, /* ap 62 */ + <0x0000a000 0x0010a000 0x001000>, /* ap 63 */ + <0x0000b000 0x0010b000 0x001000>, /* ap 64 */ + <0x00040000 0x00140000 0x010000>, /* ap 101 */ + <0x00050000 0x00150000 0x001000>; /* ap 102 */ + + target-module@2000 { /* 0x4a102000, ap 59 2c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@8000 { /* 0x4a108000, ap 61 26.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + }; + + target-module@a000 { /* 0x4a10a000, ap 63 22.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + }; + + target-module@40000 { /* 0x4a140000, ap 101 16.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x10000>; + }; + }; + + segment@180000 { /* 0x4a180000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; + + segment@200000 { /* 0x4a200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 29 */ + <0x0001f000 0x0021f000 0x001000>, /* ap 30 */ + <0x0000a000 0x0020a000 0x001000>, /* ap 31 */ + <0x0000b000 0x0020b000 0x001000>, /* ap 32 */ + <0x00006000 0x00206000 0x001000>, /* ap 33 */ + <0x00007000 0x00207000 0x001000>, /* ap 34 */ + <0x00004000 0x00204000 0x001000>, /* ap 35 */ + <0x00005000 0x00205000 0x001000>, /* ap 36 */ + <0x00012000 0x00212000 0x001000>, /* ap 37 */ + <0x00013000 0x00213000 0x001000>, /* ap 38 */ + <0x0000c000 0x0020c000 0x001000>, /* ap 39 */ + <0x0000d000 0x0020d000 0x001000>, /* ap 40 */ + <0x00010000 0x00210000 0x001000>, /* ap 41 */ + <0x00011000 0x00211000 0x001000>, /* ap 42 */ + <0x00016000 0x00216000 0x001000>, /* ap 43 */ + <0x00017000 0x00217000 0x001000>, /* ap 44 */ + <0x00014000 0x00214000 0x001000>, /* ap 45 */ + <0x00015000 0x00215000 0x001000>, /* ap 46 */ + <0x00018000 0x00218000 0x001000>, /* ap 47 */ + <0x00019000 0x00219000 0x001000>, /* ap 48 */ + <0x00020000 0x00220000 0x001000>, /* ap 49 */ + <0x00021000 0x00221000 0x001000>, /* ap 50 */ + <0x00026000 0x00226000 0x001000>, /* ap 51 */ + <0x00027000 0x00227000 0x001000>, /* ap 52 */ + <0x00028000 0x00228000 0x001000>, /* ap 53 */ + <0x00029000 0x00229000 0x001000>, /* ap 54 */ + <0x0002a000 0x0022a000 0x001000>, /* ap 55 */ + <0x0002b000 0x0022b000 0x001000>, /* ap 56 */ + <0x0001c000 0x0021c000 0x001000>, /* ap 57 */ + <0x0001d000 0x0021d000 0x001000>, /* ap 58 */ + <0x0001a000 0x0021a000 0x001000>, /* ap 73 */ + <0x0001b000 0x0021b000 0x001000>, /* ap 74 */ + <0x00024000 0x00224000 0x001000>, /* ap 75 */ + <0x00025000 0x00225000 0x001000>, /* ap 76 */ + <0x00002000 0x00202000 0x001000>, /* ap 103 */ + <0x00003000 0x00203000 0x001000>, /* ap 104 */ + <0x00008000 0x00208000 0x001000>, /* ap 105 */ + <0x00009000 0x00209000 0x001000>, /* ap 106 */ + <0x00022000 0x00222000 0x001000>, /* ap 107 */ + <0x00023000 0x00223000 0x001000>; /* ap 108 */ + + target-module@2000 { /* 0x4a202000, ap 103 3c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@4000 { /* 0x4a204000, ap 35 46.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + }; + + target-module@6000 { /* 0x4a206000, ap 33 4e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x1000>; + }; + + target-module@8000 { /* 0x4a208000, ap 105 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + }; + + target-module@a000 { /* 0x4a20a000, ap 31 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + }; + + target-module@c000 { /* 0x4a20c000, ap 39 14.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + }; + + target-module@10000 { /* 0x4a210000, ap 41 56.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x1000>; + }; + + target-module@12000 { /* 0x4a212000, ap 37 52.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x12000 0x1000>; + }; + + target-module@14000 { /* 0x4a214000, ap 45 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x14000 0x1000>; + }; + + target-module@16000 { /* 0x4a216000, ap 43 42.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x16000 0x1000>; + }; + + target-module@18000 { /* 0x4a218000, ap 47 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000 0x1000>; + }; + + target-module@1a000 { /* 0x4a21a000, ap 73 3e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1a000 0x1000>; + }; + + target-module@1c000 { /* 0x4a21c000, ap 57 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1c000 0x1000>; + }; + + target-module@1e000 { /* 0x4a21e000, ap 29 12.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e000 0x1000>; + }; + + target-module@20000 { /* 0x4a220000, ap 49 4a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + }; + + target-module@22000 { /* 0x4a222000, ap 107 3a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>; + }; + + target-module@24000 { /* 0x4a224000, ap 75 48.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + }; + + target-module@26000 { /* 0x4a226000, ap 51 24.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>; + }; + + target-module@28000 { /* 0x4a228000, ap 53 38.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>; + }; + + target-module@2a000 { /* 0x4a22a000, ap 55 5a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>; + }; + }; + + segment@280000 { /* 0x4a280000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; + + segment@300000 { /* 0x4a300000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&l4_per { /* 0x48000000 */ + compatible = "ti,omap5-l4-per", "simple-bus"; + reg = <0x48000000 0x800>, + <0x48000800 0x800>, + <0x48001000 0x400>, + <0x48001400 0x400>, + <0x48001800 0x400>, + <0x48001c00 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x48000000 0x200000>, /* segment 0 */ + <0x00200000 0x48200000 0x200000>; /* segment 1 */ + + segment@0 { /* 0x48000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x000400>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00020000 0x00020000 0x001000>, /* ap 3 */ + <0x00021000 0x00021000 0x001000>, /* ap 4 */ + <0x00032000 0x00032000 0x001000>, /* ap 5 */ + <0x00033000 0x00033000 0x001000>, /* ap 6 */ + <0x00034000 0x00034000 0x001000>, /* ap 7 */ + <0x00035000 0x00035000 0x001000>, /* ap 8 */ + <0x00036000 0x00036000 0x001000>, /* ap 9 */ + <0x00037000 0x00037000 0x001000>, /* ap 10 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 11 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 12 */ + <0x00055000 0x00055000 0x001000>, /* ap 13 */ + <0x00056000 0x00056000 0x001000>, /* ap 14 */ + <0x00057000 0x00057000 0x001000>, /* ap 15 */ + <0x00058000 0x00058000 0x001000>, /* ap 16 */ + <0x00059000 0x00059000 0x001000>, /* ap 17 */ + <0x0005a000 0x0005a000 0x001000>, /* ap 18 */ + <0x0005b000 0x0005b000 0x001000>, /* ap 19 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 20 */ + <0x0005d000 0x0005d000 0x001000>, /* ap 21 */ + <0x0005e000 0x0005e000 0x001000>, /* ap 22 */ + <0x00060000 0x00060000 0x001000>, /* ap 23 */ + <0x0006a000 0x0006a000 0x001000>, /* ap 24 */ + <0x0006b000 0x0006b000 0x001000>, /* ap 25 */ + <0x0006c000 0x0006c000 0x001000>, /* ap 26 */ + <0x0006d000 0x0006d000 0x001000>, /* ap 27 */ + <0x0006e000 0x0006e000 0x001000>, /* ap 28 */ + <0x0006f000 0x0006f000 0x001000>, /* ap 29 */ + <0x00070000 0x00070000 0x001000>, /* ap 30 */ + <0x00071000 0x00071000 0x001000>, /* ap 31 */ + <0x00072000 0x00072000 0x001000>, /* ap 32 */ + <0x00073000 0x00073000 0x001000>, /* ap 33 */ + <0x00061000 0x00061000 0x001000>, /* ap 34 */ + <0x00053000 0x00053000 0x001000>, /* ap 35 */ + <0x00054000 0x00054000 0x001000>, /* ap 36 */ + <0x000b2000 0x000b2000 0x001000>, /* ap 37 */ + <0x000b3000 0x000b3000 0x001000>, /* ap 38 */ + <0x00078000 0x00078000 0x001000>, /* ap 39 */ + <0x00079000 0x00079000 0x001000>, /* ap 40 */ + <0x00086000 0x00086000 0x001000>, /* ap 41 */ + <0x00087000 0x00087000 0x001000>, /* ap 42 */ + <0x00088000 0x00088000 0x001000>, /* ap 43 */ + <0x00089000 0x00089000 0x001000>, /* ap 44 */ + <0x00051000 0x00051000 0x001000>, /* ap 45 */ + <0x00052000 0x00052000 0x001000>, /* ap 46 */ + <0x00098000 0x00098000 0x001000>, /* ap 47 */ + <0x00099000 0x00099000 0x001000>, /* ap 48 */ + <0x0009a000 0x0009a000 0x001000>, /* ap 49 */ + <0x0009b000 0x0009b000 0x001000>, /* ap 50 */ + <0x0009c000 0x0009c000 0x001000>, /* ap 51 */ + <0x0009d000 0x0009d000 0x001000>, /* ap 52 */ + <0x00068000 0x00068000 0x001000>, /* ap 53 */ + <0x00069000 0x00069000 0x001000>, /* ap 54 */ + <0x00090000 0x00090000 0x002000>, /* ap 55 */ + <0x00092000 0x00092000 0x001000>, /* ap 56 */ + <0x000a4000 0x000a4000 0x001000>, /* ap 57 */ + <0x000a6000 0x000a6000 0x001000>, /* ap 58 */ + <0x000a8000 0x000a8000 0x004000>, /* ap 59 */ + <0x000ac000 0x000ac000 0x001000>, /* ap 60 */ + <0x000ad000 0x000ad000 0x001000>, /* ap 61 */ + <0x000ae000 0x000ae000 0x001000>, /* ap 62 */ + <0x00066000 0x00066000 0x001000>, /* ap 63 */ + <0x00067000 0x00067000 0x001000>, /* ap 64 */ + <0x000b4000 0x000b4000 0x001000>, /* ap 65 */ + <0x000b5000 0x000b5000 0x001000>, /* ap 66 */ + <0x000b8000 0x000b8000 0x001000>, /* ap 67 */ + <0x000b9000 0x000b9000 0x001000>, /* ap 68 */ + <0x000ba000 0x000ba000 0x001000>, /* ap 69 */ + <0x000bb000 0x000bb000 0x001000>, /* ap 70 */ + <0x000d1000 0x000d1000 0x001000>, /* ap 71 */ + <0x000d2000 0x000d2000 0x001000>, /* ap 72 */ + <0x000d5000 0x000d5000 0x001000>, /* ap 73 */ + <0x000d6000 0x000d6000 0x001000>, /* ap 74 */ + <0x000a2000 0x000a2000 0x001000>, /* ap 75 */ + <0x000a3000 0x000a3000 0x001000>, /* ap 76 */ + <0x00001400 0x00001400 0x000400>, /* ap 77 */ + <0x00001800 0x00001800 0x000400>, /* ap 78 */ + <0x00001c00 0x00001c00 0x000400>, /* ap 79 */ + <0x000a5000 0x000a5000 0x001000>, /* ap 80 */ + <0x0007a000 0x0007a000 0x001000>, /* ap 81 */ + <0x0007b000 0x0007b000 0x001000>, /* ap 82 */ + <0x0007c000 0x0007c000 0x001000>, /* ap 83 */ + <0x0007d000 0x0007d000 0x001000>; /* ap 84 */ + + target-module@20000 { /* 0x48020000, ap 3 04.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart3"; + reg = <0x20050 0x4>, + <0x20054 0x4>, + <0x20058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + ti,no-reset-on-init; + ti,no-idle-on-init; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_UART3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + + uart3: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@32000 { /* 0x48032000, ap 5 3e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer2"; + reg = <0x32000 0x4>, + <0x32010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>; + + timer2: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@34000 { /* 0x48034000, ap 7 46.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer3"; + reg = <0x34000 0x4>, + <0x34010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x34000 0x1000>; + + timer3: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@36000 { /* 0x48036000, ap 9 4e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer4"; + reg = <0x36000 0x4>, + <0x36010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + + timer4: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@3e000 { /* 0x4803e000, ap 11 56.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer9"; + reg = <0x3e000 0x4>, + <0x3e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + + timer9: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + target-module@51000 { /* 0x48051000, ap 45 2e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio7"; + reg = <0x51000 0x4>, + <0x51010 0x4>, + <0x51114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO7_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO7_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x51000 0x1000>; + + gpio7: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@53000 { /* 0x48053000, ap 35 36.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio8"; + reg = <0x53000 0x4>, + <0x53010 0x4>, + <0x53114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO8_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO8_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x53000 0x1000>; + + gpio8: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@55000 { /* 0x48055000, ap 13 0e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio2"; + reg = <0x55000 0x4>, + <0x55010 0x4>, + <0x55114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO2_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO2_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x55000 0x1000>; + + gpio2: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@57000 { /* 0x48057000, ap 15 06.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio3"; + reg = <0x57000 0x4>, + <0x57010 0x4>, + <0x57114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO3_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO3_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x57000 0x1000>; + + gpio3: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@59000 { /* 0x48059000, ap 17 16.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio4"; + reg = <0x59000 0x4>, + <0x59010 0x4>, + <0x59114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO4_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO4_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000 0x1000>; + + gpio4: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@5b000 { /* 0x4805b000, ap 19 1e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio5"; + reg = <0x5b000 0x4>, + <0x5b010 0x4>, + <0x5b114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO5_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO5_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + + gpio5: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@5d000 { /* 0x4805d000, ap 21 26.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio6"; + reg = <0x5d000 0x4>, + <0x5d010 0x4>, + <0x5d114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO6_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO6_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + + gpio6: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@60000 { /* 0x48060000, ap 23 24.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c3"; + reg = <0x60000 0x8>, + <0x60010 0x8>, + <0x60090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_I2C3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + + i2c3: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@66000 { /* 0x48066000, ap 63 4c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart5"; + reg = <0x66050 0x4>, + <0x66054 0x4>, + <0x66058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_UART5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x66000 0x1000>; + + uart5: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@68000 { /* 0x48068000, ap 53 54.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart6"; + reg = <0x68050 0x4>, + <0x68054 0x4>, + <0x68058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_UART6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x68000 0x1000>; + + uart6: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@6a000 { /* 0x4806a000, ap 24 0a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart1"; + reg = <0x6a050 0x4>, + <0x6a054 0x4>, + <0x6a058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_UART1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6a000 0x1000>; + + uart1: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@6c000 { /* 0x4806c000, ap 26 22.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart2"; + reg = <0x6c050 0x4>, + <0x6c054 0x4>, + <0x6c058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_UART2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6c000 0x1000>; + + uart2: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@6e000 { /* 0x4806e000, ap 28 44.1 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart4"; + reg = <0x6e050 0x4>, + <0x6e054 0x4>, + <0x6e058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_UART4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6e000 0x1000>; + + uart4: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@70000 { /* 0x48070000, ap 30 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c1"; + reg = <0x70000 0x8>, + <0x70010 0x8>, + <0x70090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_I2C1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x70000 0x1000>; + + i2c1: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@72000 { /* 0x48072000, ap 32 1c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c2"; + reg = <0x72000 0x8>, + <0x72010 0x8>, + <0x72090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_I2C2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x72000 0x1000>; + + i2c2: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@78000 { /* 0x48078000, ap 39 12.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x78000 0x1000>; + }; + + target-module@7a000 { /* 0x4807a000, ap 81 2c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c4"; + reg = <0x7a000 0x8>, + <0x7a010 0x8>, + <0x7a090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_I2C4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7a000 0x1000>; + + i2c4: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@7c000 { /* 0x4807c000, ap 83 34.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c5"; + reg = <0x7c000 0x8>, + <0x7c010 0x8>, + <0x7c090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_I2C5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7c000 0x1000>; + + i2c5: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@86000 { /* 0x48086000, ap 41 5e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer10"; + reg = <0x86000 0x4>, + <0x86010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x86000 0x1000>; + + timer10: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + target-module@88000 { /* 0x48088000, ap 43 66.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer11"; + reg = <0x88000 0x4>, + <0x88010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x88000 0x1000>; + + timer11: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + target-module@90000 { /* 0x48090000, ap 55 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x90000 0x2000>; + }; + + target-module@98000 { /* 0x48098000, ap 47 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi1"; + reg = <0x98000 0x4>, + <0x98010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MCSPI1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x98000 0x1000>; + + mcspi1: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + }; + + target-module@9a000 { /* 0x4809a000, ap 49 10.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi2"; + reg = <0x9a000 0x4>, + <0x9a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MCSPI2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9a000 0x1000>; + + mcspi2: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + }; + + target-module@9c000 { /* 0x4809c000, ap 51 3a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc1"; + reg = <0x9c000 0x4>, + <0x9c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_MMC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9c000 0x1000>; + + mmc1: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; + pbias-supply = <&pbias_mmc_reg>; + }; + }; + + target-module@a2000 { /* 0x480a2000, ap 75 02.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa2000 0x1000>; + }; + + target-module@a4000 { /* 0x480a4000, ap 57 3c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x000a4000 0x00001000>, + <0x00001000 0x000a5000 0x00001000>; + }; + + target-module@a8000 { /* 0x480a8000, ap 59 2a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa8000 0x4000>; + }; + + target-module@ad000 { /* 0x480ad000, ap 61 20.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc3"; + reg = <0xad000 0x4>, + <0xad010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MMC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xad000 0x1000>; + + mmc3: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; + }; + }; + + target-module@b2000 { /* 0x480b2000, ap 37 0c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb2000 0x1000>; + }; + + target-module@b4000 { /* 0x480b4000, ap 65 42.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc2"; + reg = <0xb4000 0x4>, + <0xb4010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_MMC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb4000 0x1000>; + + mmc2: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; + }; + }; + + target-module@b8000 { /* 0x480b8000, ap 67 32.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi3"; + reg = <0xb8000 0x4>, + <0xb8010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MCSPI3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb8000 0x1000>; + + mcspi3: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <2>; + dmas = <&sdma 15>, <&sdma 16>; + dma-names = "tx0", "rx0"; + }; + }; + + target-module@ba000 { /* 0x480ba000, ap 69 18.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi4"; + reg = <0xba000 0x4>, + <0xba010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MCSPI4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xba000 0x1000>; + + mcspi4: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; + }; + }; + + target-module@d1000 { /* 0x480d1000, ap 71 28.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc4"; + reg = <0xd1000 0x4>, + <0xd1010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MMC4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd1000 0x1000>; + + mmc4: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 57>, <&sdma 58>; + dma-names = "tx", "rx"; + }; + }; + + target-module@d5000 { /* 0x480d5000, ap 73 30.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc5"; + reg = <0xd5000 0x4>, + <0xd5010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MMC5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd5000 0x1000>; + + mmc5: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 59>, <&sdma 60>; + dma-names = "tx", "rx"; + }; + }; + }; + + segment@200000 { /* 0x48200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&l4_wkup { /* 0x4ae00000 */ + compatible = "ti,omap5-l4-wkup", "simple-bus"; + reg = <0x4ae00000 0x800>, + <0x4ae00800 0x800>, + <0x4ae01000 0x1000>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4ae00000 0x010000>, /* segment 0 */ + <0x00010000 0x4ae10000 0x010000>, /* segment 1 */ + <0x00020000 0x4ae20000 0x010000>; /* segment 2 */ + + segment@0 { /* 0x4ae00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x001000>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00006000 0x00006000 0x002000>, /* ap 3 */ + <0x00008000 0x00008000 0x001000>, /* ap 4 */ + <0x0000a000 0x0000a000 0x001000>, /* ap 15 */ + <0x0000b000 0x0000b000 0x001000>, /* ap 16 */ + <0x00004000 0x00004000 0x001000>, /* ap 17 */ + <0x00005000 0x00005000 0x001000>, /* ap 18 */ + <0x0000c000 0x0000c000 0x001000>, /* ap 19 */ + <0x0000d000 0x0000d000 0x001000>; /* ap 20 */ + + target-module@4000 { /* 0x4ae04000, ap 17 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "counter_32k"; + reg = <0x4000 0x4>, + <0x4010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl OMAP5_COUNTER_32K_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + counter32k: counter@0 { + compatible = "ti,omap-counter32k"; + reg = <0x0 0x40>; + }; + }; + + target-module@6000 { /* 0x4ae06000, ap 3 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x6000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x2000>; + + prm: prm@0 { + compatible = "ti,omap5-prm", "simple-bus"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; + }; + }; + + target-module@a000 { /* 0x4ae0a000, ap 15 2c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xa000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + + scrm: scrm@0 { + compatible = "ti,omap5-scrm"; + reg = <0x0 0x1000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + }; + + target-module@c000 { /* 0x4ae0c000, ap 19 28.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xc000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + + omap5_pmx_wkup: pinmux@840 { + compatible = "ti,omap5-padconf", + "pinctrl-single"; + reg = <0x840 0x003c>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap5_scm_wkup_pad_conf: omap5_scm_wkup_pad_conf@da0 { + compatible = "ti,omap5-scm-wkup-pad-conf", + "simple-bus"; + reg = <0xda0 0x60>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x60>; + + scm_wkup_pad_conf: scm_conf@0 { + compatible = "syscon", "simple-bus"; + reg = <0x0 0x60>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x60>; + + scm_wkup_pad_conf_clocks: clocks@0 { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + }; + }; + + segment@10000 { /* 0x4ae10000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ + <0x00001000 0x00011000 0x001000>, /* ap 6 */ + <0x00004000 0x00014000 0x001000>, /* ap 7 */ + <0x00005000 0x00015000 0x001000>, /* ap 8 */ + <0x00008000 0x00018000 0x001000>, /* ap 9 */ + <0x00009000 0x00019000 0x001000>, /* ap 10 */ + <0x0000c000 0x0001c000 0x001000>, /* ap 11 */ + <0x0000d000 0x0001d000 0x001000>; /* ap 12 */ + + target-module@0 { /* 0x4ae10000, ap 5 10.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio1"; + reg = <0x0 0x4>, + <0x10 0x4>, + <0x114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl OMAP5_GPIO1_CLKCTRL 0>, + <&wkupaon_clkctrl OMAP5_GPIO1_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + gpio1: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + ti,gpio-always-on; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@4000 { /* 0x4ae14000, ap 7 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "wd_timer2"; + reg = <0x4000 0x4>, + <0x4010 0x4>, + <0x4014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl OMAP5_WD_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + wdt2: wdt@0 { + compatible = "ti,omap5-wdt", "ti,omap3-wdt"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@8000 { /* 0x4ae18000, ap 9 18.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer1"; + reg = <0x8000 0x4>, + <0x8010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + + timer1: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-alwon; + }; + }; + + target-module@c000 { /* 0x4ae1c000, ap 11 1c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "kbd"; + reg = <0xc000 0x4>, + <0xc010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl OMAP5_KBD_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + + keypad: keypad@0 { + compatible = "ti,omap4-keypad"; + reg = <0x0 0x400>; + }; + }; + }; + + segment@20000 { /* 0x4ae20000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ + <0x0000a000 0x0002a000 0x001000>, /* ap 14 */ + <0x00000000 0x00020000 0x001000>, /* ap 21 */ + <0x00001000 0x00021000 0x001000>, /* ap 22 */ + <0x00002000 0x00022000 0x001000>, /* ap 23 */ + <0x00003000 0x00023000 0x001000>, /* ap 24 */ + <0x00007000 0x00027000 0x000400>, /* ap 25 */ + <0x00008000 0x00028000 0x000800>, /* ap 26 */ + <0x00009000 0x00029000 0x000100>, /* ap 27 */ + <0x00008800 0x00028800 0x000200>, /* ap 28 */ + <0x00008a00 0x00028a00 0x000100>; /* ap 29 */ + + target-module@0 { /* 0x4ae20000, ap 21 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + }; + + target-module@2000 { /* 0x4ae22000, ap 23 0c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@6000 { /* 0x4ae26000, ap 13 24.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00006000 0x00001000>, + <0x00001000 0x00007000 0x00000400>, + <0x00002000 0x00008000 0x00000800>, + <0x00002800 0x00008800 0x00000200>, + <0x00002a00 0x00008a00 0x00000100>, + <0x00003000 0x00009000 0x00000100>; + }; + }; +}; + diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 574ac11c0489..2fefaafdf901 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -7,6 +7,7 @@ * Based on "omap4.dtsi" */ +#include <dt-bindings/bus/ti-sysc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/omap.h> @@ -151,178 +152,13 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - l4_cfg: l4@4a000000 { - compatible = "ti,omap5-l4-cfg", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a000000 0x22a000>; - - scm_core: scm@2000 { - compatible = "ti,omap5-scm-core", "simple-bus"; - reg = <0x2000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x2000 0x800>; - - scm_conf: scm_conf@0 { - compatible = "syscon"; - reg = <0x0 0x800>; - #address-cells = <1>; - #size-cells = <1>; - }; - }; - - scm_padconf_core: scm@2800 { - compatible = "ti,omap5-scm-padconf-core", - "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x2800 0x800>; - - omap5_pmx_core: pinmux@40 { - compatible = "ti,omap5-padconf", - "pinctrl-single"; - reg = <0x40 0x01b6>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - - omap5_padconf_global: omap5_padconf_global@5a0 { - compatible = "syscon", - "simple-bus"; - reg = <0x5a0 0xec>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x5a0 0xec>; - - pbias_regulator: pbias_regulator@60 { - compatible = "ti,pbias-omap5", "ti,pbias-omap"; - reg = <0x60 0x4>; - syscon = <&omap5_padconf_global>; - pbias_mmc_reg: pbias_mmc_omap5 { - regulator-name = "pbias_mmc_omap5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - }; - }; - }; - - cm_core_aon: cm_core_aon@4000 { - compatible = "ti,omap5-cm-core-aon", - "simple-bus"; - reg = <0x4000 0x2000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4000 0x2000>; - - cm_core_aon_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm_core_aon_clockdomains: clockdomains { - }; - }; - - cm_core: cm_core@8000 { - compatible = "ti,omap5-cm-core", "simple-bus"; - reg = <0x8000 0x3000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x8000 0x3000>; - - cm_core_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm_core_clockdomains: clockdomains { - }; - }; + l4_wkup: interconnect@4ae00000 { }; - l4_wkup: l4@4ae00000 { - compatible = "ti,omap5-l4-wkup", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4ae00000 0x2b000>; - - counter32k: counter@4000 { - compatible = "ti,omap-counter32k"; - reg = <0x4000 0x40>; - ti,hwmods = "counter_32k"; - }; - - prm: prm@6000 { - compatible = "ti,omap5-prm", "simple-bus"; - reg = <0x6000 0x3000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x6000 0x3000>; - - prm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - prm_clockdomains: clockdomains { - }; - }; - - scrm: scrm@a000 { - compatible = "ti,omap5-scrm"; - reg = <0xa000 0x2000>; - - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - scrm_clockdomains: clockdomains { - }; - }; - - omap5_pmx_wkup: pinmux@c840 { - compatible = "ti,omap5-padconf", - "pinctrl-single"; - reg = <0xc840 0x003c>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - - omap5_scm_wkup_pad_conf: omap5_scm_wkup_pad_conf@cda0 { - compatible = "ti,omap5-scm-wkup-pad-conf", - "simple-bus"; - reg = <0xcda0 0x60>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0xcda0 0x60>; - - scm_wkup_pad_conf: scm_conf@0 { - compatible = "syscon", "simple-bus"; - reg = <0x0 0x60>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0x60>; + l4_cfg: interconnect@4a000000 { + }; - scm_wkup_pad_conf_clocks: clocks@0 { - #address-cells = <1>; - #size-cells = <0>; - }; - }; - }; + l4_per: interconnect@48000000 { }; ocmcram: ocmcram@40300000 { @@ -330,108 +166,6 @@ reg = <0x40300000 0x20000>; /* 128k */ }; - sdma: dma-controller@4a056000 { - compatible = "ti,omap4430-sdma"; - reg = <0x4a056000 0x1000>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - dma-channels = <32>; - dma-requests = <127>; - ti,hwmods = "dma_system"; - }; - - gpio1: gpio@4ae10000 { - compatible = "ti,omap4-gpio"; - reg = <0x4ae10000 0x200>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio1"; - ti,gpio-always-on; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@48055000 { - compatible = "ti,omap4-gpio"; - reg = <0x48055000 0x200>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio2"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@48057000 { - compatible = "ti,omap4-gpio"; - reg = <0x48057000 0x200>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio3"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@48059000 { - compatible = "ti,omap4-gpio"; - reg = <0x48059000 0x200>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio4"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio5: gpio@4805b000 { - compatible = "ti,omap4-gpio"; - reg = <0x4805b000 0x200>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio5"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio6: gpio@4805d000 { - compatible = "ti,omap4-gpio"; - reg = <0x4805d000 0x200>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio6"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio7: gpio@48051000 { - compatible = "ti,omap4-gpio"; - reg = <0x48051000 0x200>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio7"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio8: gpio@48053000 { - compatible = "ti,omap4-gpio"; - reg = <0x48053000 0x200>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio8"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - gpmc: gpmc@50000000 { compatible = "ti,omap4430-gpmc"; reg = <0x50000000 0x1000>; @@ -451,217 +185,6 @@ #gpio-cells = <2>; }; - i2c1: i2c@48070000 { - compatible = "ti,omap4-i2c"; - reg = <0x48070000 0x100>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c1"; - }; - - i2c2: i2c@48072000 { - compatible = "ti,omap4-i2c"; - reg = <0x48072000 0x100>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c2"; - }; - - i2c3: i2c@48060000 { - compatible = "ti,omap4-i2c"; - reg = <0x48060000 0x100>; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c3"; - }; - - i2c4: i2c@4807a000 { - compatible = "ti,omap4-i2c"; - reg = <0x4807a000 0x100>; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c4"; - }; - - i2c5: i2c@4807c000 { - compatible = "ti,omap4-i2c"; - reg = <0x4807c000 0x100>; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c5"; - }; - - hwspinlock: spinlock@4a0f6000 { - compatible = "ti,omap4-hwspinlock"; - reg = <0x4a0f6000 0x1000>; - ti,hwmods = "spinlock"; - #hwlock-cells = <1>; - }; - - mcspi1: spi@48098000 { - compatible = "ti,omap4-mcspi"; - reg = <0x48098000 0x200>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi1"; - ti,spi-num-cs = <4>; - dmas = <&sdma 35>, - <&sdma 36>, - <&sdma 37>, - <&sdma 38>, - <&sdma 39>, - <&sdma 40>, - <&sdma 41>, - <&sdma 42>; - dma-names = "tx0", "rx0", "tx1", "rx1", - "tx2", "rx2", "tx3", "rx3"; - }; - - mcspi2: spi@4809a000 { - compatible = "ti,omap4-mcspi"; - reg = <0x4809a000 0x200>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi2"; - ti,spi-num-cs = <2>; - dmas = <&sdma 43>, - <&sdma 44>, - <&sdma 45>, - <&sdma 46>; - dma-names = "tx0", "rx0", "tx1", "rx1"; - }; - - mcspi3: spi@480b8000 { - compatible = "ti,omap4-mcspi"; - reg = <0x480b8000 0x200>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi3"; - ti,spi-num-cs = <2>; - dmas = <&sdma 15>, <&sdma 16>; - dma-names = "tx0", "rx0"; - }; - - mcspi4: spi@480ba000 { - compatible = "ti,omap4-mcspi"; - reg = <0x480ba000 0x200>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi4"; - ti,spi-num-cs = <1>; - dmas = <&sdma 70>, <&sdma 71>; - dma-names = "tx0", "rx0"; - }; - - uart1: serial@4806a000 { - compatible = "ti,omap4-uart"; - reg = <0x4806a000 0x100>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart1"; - clock-frequency = <48000000>; - }; - - uart2: serial@4806c000 { - compatible = "ti,omap4-uart"; - reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart2"; - clock-frequency = <48000000>; - }; - - uart3: serial@48020000 { - compatible = "ti,omap4-uart"; - reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart3"; - clock-frequency = <48000000>; - }; - - uart4: serial@4806e000 { - compatible = "ti,omap4-uart"; - reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - }; - - uart5: serial@48066000 { - compatible = "ti,omap4-uart"; - reg = <0x48066000 0x100>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart5"; - clock-frequency = <48000000>; - }; - - uart6: serial@48068000 { - compatible = "ti,omap4-uart"; - reg = <0x48068000 0x100>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart6"; - clock-frequency = <48000000>; - }; - - mmc1: mmc@4809c000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x4809c000 0x400>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc1"; - ti,dual-volt; - ti,needs-special-reset; - dmas = <&sdma 61>, <&sdma 62>; - dma-names = "tx", "rx"; - pbias-supply = <&pbias_mmc_reg>; - }; - - mmc2: mmc@480b4000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480b4000 0x400>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc2"; - ti,needs-special-reset; - dmas = <&sdma 47>, <&sdma 48>; - dma-names = "tx", "rx"; - }; - - mmc3: mmc@480ad000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480ad000 0x400>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc3"; - ti,needs-special-reset; - dmas = <&sdma 77>, <&sdma 78>; - dma-names = "tx", "rx"; - }; - - mmc4: mmc@480d1000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480d1000 0x400>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc4"; - ti,needs-special-reset; - dmas = <&sdma 57>, <&sdma 58>; - dma-names = "tx", "rx"; - }; - - mmc5: mmc@480d5000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480d5000 0x400>; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc5"; - ti,needs-special-reset; - dmas = <&sdma 59>, <&sdma 60>; - dma-names = "tx", "rx"; - }; - mmu_dsp: mmu@4a066000 { compatible = "ti,omap4-iommu"; reg = <0x4a066000 0x100>; @@ -679,12 +202,6 @@ ti,iommu-bus-err-back; }; - keypad: keypad@4ae1c000 { - compatible = "ti,omap4-keypad"; - reg = <0x4ae1c000 0x400>; - ti,hwmods = "kbd"; - }; - mcpdm: mcpdm@40132000 { compatible = "ti,omap4-mcpdm"; reg = <0x40132000 0x7f>, /* MPU private access */ @@ -755,55 +272,6 @@ status = "disabled"; }; - mailbox: mailbox@4a0f4000 { - compatible = "ti,omap4-mailbox"; - reg = <0x4a0f4000 0x200>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox"; - #mbox-cells = <1>; - ti,mbox-num-users = <3>; - ti,mbox-num-fifos = <8>; - mbox_ipu: mbox_ipu { - ti,mbox-tx = <0 0 0>; - ti,mbox-rx = <1 0 0>; - }; - mbox_dsp: mbox_dsp { - ti,mbox-tx = <3 0 0>; - ti,mbox-rx = <2 0 0>; - }; - }; - - timer1: timer@4ae18000 { - compatible = "ti,omap5430-timer"; - reg = <0x4ae18000 0x80>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer1"; - ti,timer-alwon; - clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>; - clock-names = "fck"; - }; - - timer2: timer@48032000 { - compatible = "ti,omap5430-timer"; - reg = <0x48032000 0x80>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer2"; - }; - - timer3: timer@48034000 { - compatible = "ti,omap5430-timer"; - reg = <0x48034000 0x80>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer3"; - }; - - timer4: timer@48036000 { - compatible = "ti,omap5430-timer"; - reg = <0x48036000 0x80>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer4"; - }; - timer5: timer@40138000 { compatible = "ti,omap5430-timer"; reg = <0x40138000 0x80>, @@ -843,37 +311,6 @@ ti,timer-pwm; }; - timer9: timer@4803e000 { - compatible = "ti,omap5430-timer"; - reg = <0x4803e000 0x80>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer9"; - ti,timer-pwm; - }; - - timer10: timer@48086000 { - compatible = "ti,omap5430-timer"; - reg = <0x48086000 0x80>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer10"; - ti,timer-pwm; - }; - - timer11: timer@48088000 { - compatible = "ti,omap5430-timer"; - reg = <0x48088000 0x80>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer11"; - ti,timer-pwm; - }; - - wdt2: wdt@4ae14000 { - compatible = "ti,omap5-wdt", "ti,omap3-wdt"; - reg = <0x4ae14000 0x80>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "wd_timer2"; - }; - dmm@4e000000 { compatible = "ti,omap5-dmm"; reg = <0x4e000000 0x800>; @@ -905,99 +342,6 @@ hw-caps-temp-alert; }; - usb3: omap_dwc3@4a020000 { - compatible = "ti,dwc3"; - ti,hwmods = "usb_otg_ss"; - reg = <0x4a020000 0x10000>; - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - utmi-mode = <2>; - ranges; - dwc3: dwc3@4a030000 { - compatible = "snps,dwc3"; - reg = <0x4a030000 0x10000>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "peripheral", - "host", - "otg"; - phys = <&usb2_phy>, <&usb3_phy>; - phy-names = "usb2-phy", "usb3-phy"; - dr_mode = "peripheral"; - }; - }; - - ocp2scp@4a080000 { - compatible = "ti,omap-ocp2scp"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x4a080000 0x20>; - ranges; - ti,hwmods = "ocp2scp1"; - usb2_phy: usb2phy@4a084000 { - compatible = "ti,omap-usb2"; - reg = <0x4a084000 0x7c>; - syscon-phy-power = <&scm_conf 0x300>; - clocks = <&usb_phy_cm_clk32k>, - <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>; - clock-names = "wkupclk", "refclk"; - #phy-cells = <0>; - }; - - usb3_phy: usb3phy@4a084400 { - compatible = "ti,omap-usb3"; - reg = <0x4a084400 0x80>, - <0x4a084800 0x64>, - <0x4a084c00 0x40>; - reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - syscon-phy-power = <&scm_conf 0x370>; - clocks = <&usb_phy_cm_clk32k>, - <&sys_clkin>, - <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>; - clock-names = "wkupclk", - "sysclk", - "refclk"; - #phy-cells = <0>; - }; - }; - - usbhstll: usbhstll@4a062000 { - compatible = "ti,usbhs-tll"; - reg = <0x4a062000 0x1000>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "usb_tll_hs"; - }; - - usbhshost: usbhshost@4a064000 { - compatible = "ti,usbhs-host"; - reg = <0x4a064000 0x800>; - ti,hwmods = "usb_host_hs"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clocks = <&l3init_60m_fclk>, - <&xclk60mhsp1_ck>, - <&xclk60mhsp2_ck>; - clock-names = "refclk_60m_int", - "refclk_60m_ext_p1", - "refclk_60m_ext_p2"; - - usbhsohci: ohci@4a064800 { - compatible = "ti,ohci-omap3"; - reg = <0x4a064800 0x400>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - remote-wakeup-connected; - }; - - usbhsehci: ehci@4a064c00 { - compatible = "ti,ehci-omap"; - reg = <0x4a064c00 0x400>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - bandgap: bandgap@4a0021e0 { reg = <0x4a0021e0 0xc 0x4a00232c 0xc @@ -1010,27 +354,6 @@ }; /* OCP2SCP3 */ - ocp2scp@4a090000 { - compatible = "ti,omap-ocp2scp"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x4a090000 0x20>; - ranges; - ti,hwmods = "ocp2scp3"; - sata_phy: phy@4a096000 { - compatible = "ti,phy-pipe3-sata"; - reg = <0x4A096000 0x80>, /* phy_rx */ - <0x4A096400 0x64>, /* phy_tx */ - <0x4A096800 0x40>; /* pll_ctrl */ - reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - syscon-phy-power = <&scm_conf 0x374>; - clocks = <&sys_clkin>, - <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>; - clock-names = "sysclk", "refclk"; - #phy-cells = <0>; - }; - }; - sata: sata@4a141100 { compatible = "snps,dwc-ahci"; reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; @@ -1184,6 +507,7 @@ coefficients = <65 (-1791)>; }; +#include "omap5-l4.dtsi" #include "omap54xx-clocks.dtsi" &gpu_thermal { diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index 3228ad5fb725..ccbecad9c5c7 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -35,7 +35,7 @@ clocks = <&clks CLK_NONE>; }; - pxa27x_ohci: usb@4c000000 { + usb0: usb@4c000000 { compatible = "marvell,pxa-ohci"; reg = <0x4c000000 0x10000>; interrupts = <3>; diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index 080d5c5169b5..e83879d97aea 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -43,8 +43,6 @@ }; cpus { - #address-cells = <0>; - #size-cells = <0>; cpu { compatible = "marvell,xscale"; device_type = "cpu"; @@ -119,9 +117,9 @@ status = "disabled"; }; - hwuart: serial@41100000 { + hwuart: serial@41600000 { compatible = "mrvl,pxa-uart"; - reg = <0x41100000 0x30>; + reg = <0x41600000 0x30>; interrupts = <7>; status = "disabled"; }; @@ -136,13 +134,6 @@ status = "disabled"; }; - usb0: ohci@4c000000 { - compatible = "marvell,pxa-ohci"; - reg = <0x4c000000 0x10000>; - interrupts = <3>; - status = "disabled"; - }; - mmc0: mmc@41100000 { compatible = "marvell,pxa-mmc"; reg = <0x41100000 0x1000>; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi new file mode 100644 index 000000000000..8ac24e3c8513 --- /dev/null +++ b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi @@ -0,0 +1,405 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "pxa3xx.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + /* Will be overridden by bootloader */ + hw-revision = <0>; + + chosen { + bootargs = "root=ubi0:RootFS rootfstype=ubifs rw ubi.mtd=3"; + stdout-path = &ffuart; + }; + + memory { + device_type = "memory"; + reg = <0xa0000000 0x8000000>; /* 128 MB */ + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3-fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8-fixed-supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_va_5v0: regulator-va-5v0 { + compatible = "regulator-fixed"; + regulator-name = "va-5v0-fixed-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 124 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + ssp_dai0: ssp-dai0 { + compatible = "mrvl,pxa-ssp-dai"; + pinctrl-names = "default"; + pinctrl-0 = <&ssp0_dai_pins>; + port = <&ssp1>; + #sound-dai-cells = <0>; + dmas = <&pdma 13 3 + &pdma 14 3>; + dma-names = "rx", "tx"; + clock-names = "extclk"; + }; + + ssp_dai1: ssp-dai1 { + compatible = "mrvl,pxa-ssp-dai"; + pinctrl-names = "default"; + pinctrl-0 = <&ssp1_dai_pins>; + port = <&ssp2>; + #sound-dai-cells = <0>; + dmas = <&pdma 15 3 + &pdma 16 3>; + dma-names = "rx", "tx"; + clock-names = "extclk"; + }; + + spi: spi { + compatible = "spi-gpio"; + #address-cells = <0x1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>; + gpio-sck = <&gpio 95 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio 98 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio 97 GPIO_ACTIVE_HIGH>; + cs-gpios = < + &gpio 34 GPIO_ACTIVE_HIGH + &gpio 125 GPIO_ACTIVE_HIGH + &gpio 96 GPIO_ACTIVE_HIGH + >; + num-chipselects = <3>; + + dac: dac@2 { + compatible = "ti,dac7512"; + reg = <2>; + spi-max-frequency = <1000000>; + vcc-supply = <®_3v3>; + }; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + + on-off { + label = "on_off button"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F6>; + }; + + rescue-boot { + label = "rescue boot button"; + gpios = <&gpio 115 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_F4>; + }; + + setup { + label = "setup"; + gpios = <&gpio 119 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_F3>; + }; + }; + + rotary: rotary-encoder { + compatible = "rotary-encoder"; + gpios = < + &gpio 19 GPIO_ACTIVE_LOW + &gpio 20 GPIO_ACTIVE_HIGH + >; + linux,axis = <REL_X>; + rotary-encoder,relative-axis; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_a &led_pins_b>; + + left { + label = "raumfeld:1"; + gpios = <&gpio 36 GPIO_ACTIVE_LOW>; + }; + + right { + label = "raumfeld:2"; + gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; + }; + }; + + poweroff { + compatible = "gpio-poweroff"; + pinctrl-names = "default"; + pinctrl-0 = <&poweroff_pins>; + gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + }; + + mmc0_pwrseq: mmc-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pwrseq_pins>; + reset-gpios = < + &gpio 113 GPIO_ACTIVE_LOW /* W2W_RESET */ + &gpio 114 GPIO_ACTIVE_LOW /* W2W_PDN */ + >; + }; + + ethernet: ethernet@10000000 { + compatible = "smsc,lan9115"; + pinctrl-names = "default"; + pinctrl-0 = <&smsc_pins &smsc_bus_pins>; + reg = <0x10000000 0x100000>; + phy-mode = "mii"; + interrupt-parent = <&gpio>; + interrupts = <40 IRQ_TYPE_EDGE_FALLING>; + vdd33a-supply = <®_3v3>; + vddvario-supply = <®_1v8>; + reset-gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + reg-io-width = <4>; + smsc,save-mac-address; + smsc,irq-push-pull; + }; +}; + +&ffuart { + status = "okay"; +}; + +&pwri2c { + status = "okay"; + + max8660: regulator@34 { + compatible = "maxim,max8660"; + reg = <0x34>; + + regulators { + regulator-v3 { + regulator-compatible= "V3(DCDC)"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1800000>; + }; + + regulator-v4 { + regulator-compatible= "V4(DCDC)"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1800000>; + }; + + regulator-v5 { + regulator-compatible= "V5(LDO)"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2000000>; + }; + + reg_vcc_sdio: regulator-v6 { + regulator-compatible= "V6(LDO)"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator-v7 { + regulator-compatible= "V7(LDO)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&pxai2c1 { + status = "okay"; + mrvl,i2c-fast-mode; + pinctrl-names = "default"; + pinctrl-0 = <&pxai2c1_pins>; +}; + +&ssp1 { + status = "okay"; +}; + +&ssp2 { + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + nand-rb = <0>; + nand-ecc-mode = "hw"; + marvell,nand-keep-config; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Bootloader"; + reg = <0x0000000 0xa0000>; + read-only; + }; + + partition@a0000 { + label = "BootloaderEnvironment"; + reg = <0x0a0000 0x20000>; + }; + + partition@c0000 { + label = "BootloaderSplashScreen"; + reg = <0x0c0000 0x60000>; + }; + + partition@120000 { + label = "UBI"; + reg = <0x120000 0x7ee0000>; + }; + }; + }; +}; + +&usb0 { + status = "okay"; + marvell,enable-port1; + marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */ + pinctrl-names = "default"; + pinctrl-0 = <&pxa3xx_ohci_pins>; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + pxa-mmc,detect-delay-ms = <200>; + vmmc-supply = <®_vcc_sdio>; + mmc-pwrseq = <&mmc0_pwrseq>; + non-removable; + bus-width = <4>; +}; + +&pinctrl { + poweroff_pins: poweroff-pins { + pinctrl-single,pins = <MFP_PIN_PXA300(16) MFP_AF0>; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); + }; + + led_pins_a: led-pins-a { + pinctrl-single,pins = <MFP_PIN_PXA300(35) MFP_AF0>; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + led_pins_b: led-pins-b { + pinctrl-single,pins = <MFP_PIN_PXA300(36) MFP_AF0>; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH); + }; + + pxai2c1_pins: pxai2c1-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(21) MFP_AF1 /* I2C_SCL */ + MFP_PIN_PXA300(22) MFP_AF1 /* I2C_SDA */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH); + }; + + gpio_keys_pins: gpio-keys-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(14) MFP_AF0 /* SCK */ + MFP_PIN_PXA300(115) MFP_AF0 /* MOSI */ + MFP_PIN_PXA300(119) MFP_AF0 /* MISO */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); + }; + + spi_pins: spi-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(95) MFP_AF0 /* SCK */ + MFP_PIN_PXA300(97) MFP_AF0 /* MOSI */ + MFP_PIN_PXA300(98) MFP_AF0 /* MISO */ + MFP_PIN_PXA300(34) MFP_AF0 /* CS#0 */ + MFP_PIN_PXA300(125) MFP_AF0 /* CS#1 */ + MFP_PIN_PXA300(96) MFP_AF0 /* CS#2 */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + pxa3xx_ohci_pins: pxa3xx-ohci-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300_2(0) MFP_AF1 /* USBHPEN */ + MFP_PIN_PXA300_2(1) MFP_AF1 /* USBHPWR */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + smsc_pins: smsc-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(39) MFP_AF0 /* RESET */ + MFP_PIN_PXA300(40) MFP_AF0 /* IRQ */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + smsc_bus_pins: smsc-bus-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(1) MFP_AF1 /* nCS2 */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); + }; + + mmc0_pins: mmc0-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(3) MFP_AF4 /* MMC1_DAT0 */ + MFP_PIN_PXA300(4) MFP_AF4 /* MMC1_DAT1 */ + MFP_PIN_PXA300(5) MFP_AF4 /* MMC1_DAT2 */ + MFP_PIN_PXA300(6) MFP_AF4 /* MMC1_DAT3 */ + MFP_PIN_PXA300(7) MFP_AF4 /* MMC1_CLK */ + MFP_PIN_PXA300(8) MFP_AF4 /* MMC1_CMD */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH); + }; + + mmc0_pwrseq_pins: mmc0-pwrseq-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(113) MFP_AF0 /* W2W_RESET */ + MFP_PIN_PXA300(114) MFP_AF0 /* W2W_PDN */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); + }; + + ssp0_dai_pins: ssp0-dai-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(85) MFP_AF1 /* SSP1_SCLK */ + MFP_PIN_PXA300(86) MFP_AF1 /* SSP1_FRM */ + MFP_PIN_PXA300(87) MFP_AF1 /* SSP1_TXD */ + MFP_PIN_PXA300(88) MFP_AF1 /* SSP1_RXD */ + MFP_PIN_PXA300(89) MFP_AF1 /* SSP1_EXTCLK */ + MFP_PIN_PXA300(90) MFP_AF1 /* SSP1_SYSCLK */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + ssp1_dai_pins: ssp1-dai-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(25) MFP_AF2 /* SSP2_SCLK */ + MFP_PIN_PXA300(26) MFP_AF2 /* SSP2_FRM */ + MFP_PIN_PXA300(27) MFP_AF2 /* SSP2_TXD */ + MFP_PIN_PXA300(29) MFP_AF2 /* SSP2_EXTCLK */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; +}; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-connector.dts b/arch/arm/boot/dts/pxa300-raumfeld-connector.dts new file mode 100644 index 000000000000..3e9445419e39 --- /dev/null +++ b/arch/arm/boot/dts/pxa300-raumfeld-connector.dts @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "pxa300-raumfeld-common.dtsi" +#include "pxa300-raumfeld-tuneable-clock.dtsi" + +/ { + model = "Raumfeld Connector (PXA3xx)"; + compatible = "raumfeld,raumfeld-connector-pxa303", "marvell,pxa300"; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "Raumfeld Connector"; + #address-cells = <1>; + #size-cells = <0>; + + simple-audio-card,dai-link@0 { + reg = <0>; + format = "i2s"; + bitclock-master = <&dailink_master_analog>; + frame-master = <&dailink_master_analog>; + mclk-fs = <256>; + + dailink_master_analog: cpu { + sound-dai = <&ssp_dai0>; + }; + + codec { + sound-dai = <&cs4270>; + }; + }; + + simple-audio-card,dai-link@1 { + reg = <1>; + format = "i2s"; + bitclock-master = <&dailink_master_digital>; + frame-master = <&dailink_master_digital>; + mclk-fs = <256>; + + dailink_master_digital: cpu { + sound-dai = <&ssp_dai1>; + }; + + codec { + sound-dai = <&ak4104>; + }; + }; + }; +}; + +&ssp1 { + status = "okay"; +}; + +&ssp2 { + status = "okay"; +}; + +&spi { + ak4104: optical-transmitter@0 { + compatible = "asahi-kasei,ak4104"; + reg = <0>; + vdd-supply = <®_3v3>; + spi-max-frequency = <5000000>; + reset-gpios = <&gpio 38 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; +}; + +&rotary { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-controller.dts b/arch/arm/boot/dts/pxa300-raumfeld-controller.dts new file mode 100644 index 000000000000..65d825091f0d --- /dev/null +++ b/arch/arm/boot/dts/pxa300-raumfeld-controller.dts @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "pxa300-raumfeld-common.dtsi" + +/ { + model = "Raumfeld Controller (PXA3xx)"; + compatible = "raumfeld,raumfeld-controller-pxa303", "marvell,pxa300"; + + reg_vbatt: regulator-vbatt { + compatible = "regulator-fixed"; + regulator-name = "vbatt-fixed-supply"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + lcd_supply: regulator-va-tft { + compatible = "regulator-fixed"; + regulator-name = "va-tft-fixed-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + onewire { + compatible = "w1-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&w1_pins>; + gpios = < + &gpio 126 GPIO_OPEN_DRAIN /* W1 I/O */ + &gpio 105 GPIO_ACTIVE_HIGH /* pullup */ + >; + + w1_ds2760: slave-ds2760 { + compatible = "maxim,ds2760"; + power-supplies = <&charger>; + }; + }; + + charger: charger { + compatible = "gpio-charger"; + charger-type = "mains"; + gpios = <&gpio 101 GPIO_ACTIVE_LOW>; + }; + + /* + * One of the following two will be set to "okay" by the bootloader, + * depending on the hardware revision. + */ + backlight-controller-pwm { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins>; + pwms = <&pwm0 10000>; + power-supply = <®_vbatt>; + status = "disabled"; + + brightness-levels = < + 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 + >; + default-brightness-level = <100>; + }; + + backlight-controller { + compatible = "lltc,lt3593"; + pinctrl-names = "default"; + pinctrl-0 = <<3593_pins>; + lltc,ctrl-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + status = "disabled"; + + led { + label = "backlight"; + default-state = "on"; + }; + }; +}; + +®_va_5v0 { + status = "disabled"; +}; + +ðernet { + status = "disabled"; +}; + +&leds { + status = "disabled"; +}; + +&dac { + status = "disabled"; +}; + +&pwm0 { + status = "okay"; +}; + +&keys { + dock-detect { + label = "dock detect"; + gpios = <&gpio 116 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_F5>; + }; +}; + +&spi { + accelerometer@1 { + compatible = "st,lis302dl-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&lis302_pins>; + reg = <1>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <104 IRQ_TYPE_EDGE_FALLING>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + }; +}; + +&lcdc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcdc_pins>; + lcd-supply = <&lcd_supply>; + + port { + lcdc_out: endpoint { + remote-endpoint = <&panel_in>; + bus-width = <16>; + }; + }; + + panel { + compatible = "sharp,lq043t3dx0-panel"; + display-timings { + native-mode = <&timing0>; + timing0: timing { + clock-frequency = <9009000>; + pixelclk-active = <0>; /* negative edge */ + hactive = <480>; + vactive = <272>; + hsync-len = <41>; + hback-porch = <2>; + hfront-porch = <1>; + vsync-len = <10>; + vback-porch = <3>; + vfront-porch = <1>; + }; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdc_out>; + }; + }; + }; +}; + +&gcu { + status = "okay"; +}; + +&pxai2c1 { + touchscreen@a { + compatible = "eeti,exc3000-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&eeti_ts_pins>; + reg = <0xa>; + interrupt-parent = <&gpio>; + interrupts = <32 IRQ_TYPE_EDGE_RISING>; + attn-gpios = <&gpio 32 GPIO_ACTIVE_HIGH>; + touchscreen-inverted-y; + }; +}; + +&pinctrl { + lis302_pins: lis302-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(104) MFP_AF0 /* IRQ */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + eeti_ts_pins: eeti-ts-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(32) MFP_AF0 /* IRQ */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); + }; + + lt3593_pins: lt3593-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(17) MFP_AF0 /* Backlight */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + pwm0_pins: pwm0-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(17) MFP_AF1 /* PWM */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + w1_pins: w1-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(126) MFP_AF0 /* PWM */ + MFP_PIN_PXA300(105) MFP_AF0 /* PWM */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); + }; + + lcdc_pins: lcdc-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(54) MFP_AF1 /* LDD_0 */ + MFP_PIN_PXA300(55) MFP_AF1 /* LDD_1 */ + MFP_PIN_PXA300(56) MFP_AF1 /* LDD_2 */ + MFP_PIN_PXA300(57) MFP_AF1 /* LDD_3 */ + MFP_PIN_PXA300(58) MFP_AF1 /* LDD_4 */ + MFP_PIN_PXA300(59) MFP_AF1 /* LDD_5 */ + MFP_PIN_PXA300(60) MFP_AF1 /* LDD_6 */ + MFP_PIN_PXA300(61) MFP_AF1 /* LDD_7 */ + MFP_PIN_PXA300(62) MFP_AF1 /* LDD_8 */ + MFP_PIN_PXA300(63) MFP_AF1 /* LDD_9 */ + MFP_PIN_PXA300(64) MFP_AF1 /* LDD_10 */ + MFP_PIN_PXA300(65) MFP_AF1 /* LDD_11 */ + MFP_PIN_PXA300(66) MFP_AF1 /* LDD_12 */ + MFP_PIN_PXA300(67) MFP_AF1 /* LDD_13 */ + MFP_PIN_PXA300(68) MFP_AF1 /* LDD_14 */ + MFP_PIN_PXA300(69) MFP_AF1 /* LDD_15 */ + MFP_PIN_PXA300(70) MFP_AF1 /* LDD_16 */ + MFP_PIN_PXA300(71) MFP_AF1 /* LDD_17 */ + MFP_PIN_PXA300(72) MFP_AF1 /* LCD_FCLK */ + MFP_PIN_PXA300(73) MFP_AF1 /* LCD_LCLK */ + MFP_PIN_PXA300(74) MFP_AF1 /* LCD_PCLK */ + MFP_PIN_PXA300(75) MFP_AF1 /* LCD_BIAS */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; +}; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts new file mode 100644 index 000000000000..5a0f7f17856f --- /dev/null +++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "pxa300-raumfeld-common.dtsi" +#include "pxa300-raumfeld-tuneable-clock.dtsi" + +/ { + model = "Raumfeld Speaker L (PXA3xx)"; + compatible = "raumfeld,raumfeld-speaker-l-pxa303", "marvell,pxa300"; +}; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts new file mode 100644 index 000000000000..fa10d896282c --- /dev/null +++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "pxa300-raumfeld-common.dtsi" +#include "pxa300-raumfeld-tuneable-clock.dtsi" + +/ { + model = "Raumfeld Speaker M (PXA3xx)"; + compatible = "raumfeld,raumfeld-speaker-m-pxa303", "marvell,pxa300"; +}; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts new file mode 100644 index 000000000000..5f9e37585a28 --- /dev/null +++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "pxa300-raumfeld-common.dtsi" + +/ { + model = "Raumfeld Speaker One (PXA3xx)"; + compatible = "raumfeld,raumfeld-speaker-one-pxa303", "marvell,pxa300"; + + wm8782: wm8782 { + compatible = "wm8782"; + #sound-dai-cells = <0>; + Vdd-supply = <®_3v3>; + Vdda-supply = <®_va_5v0>; + }; + + xo_11mhz: oscillator-11mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + clock-accuracy = <100>; + }; + + xo_audio: clock-gate { + compatible = "gpio-gate-clock"; + pinctrlnames = "default"; + pinctrl-0 = <&xo_audio_pins>; + clocks = <&xo_11mhz>; + #clock-cells = <0>; + enable-gpios = <&gpio 111 GPIO_ACTIVE_HIGH>; + }; + + reg_va_30v0: regulator-va-30v0 { + compatible = "regulator-fixed"; + regulator-name = "va-30v0-fixed-supply"; + regulator-min-microvolt = <30000000>; + regulator-max-microvolt = <30000000>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "Raumfeld Speaker"; + #address-cells = <1>; + #size-cells = <0>; + + simple-audio-card,dai-link@0 { + reg = <0>; + format = "i2s"; + bitclock-master = <&dailink_master_analog_out>; + frame-master = <&dailink_master_analog_out>; + mclk-fs = <256>; + + dailink_master_analog_out: cpu { + sound-dai = <&ssp_dai0>; + }; + + codec { + sound-dai = <&sta320>; + }; + }; + + simple-audio-card,dai-link@1 { + reg = <1>; + format = "i2s"; + bitclock-master = <&dailink_master_analog_in>; + frame-master = <&dailink_master_analog_in>; + mclk-fs = <256>; + + dailink_master_analog_in: cpu { + sound-dai = <&ssp_dai0>; + }; + + codec { + sound-dai = <&wm8782>; + }; + }; + }; +}; + +&ssp_dai0 { + clocks = <&xo_audio>; +}; + +&spi { + dac@2 { + compatible = "ti,dac7512"; + reg = <2>; + spi-max-frequency = <1000000>; + vcc-supply = <®_3v3>; + }; +}; + +&rotary { + status = "okay"; +}; + +&pxai2c1 { + sta320: codec@1a { + compatible = "st,sta32x"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&sta320_pins>; + clocks = <&xo_audio>; + clock-names = "xti"; + reset-gpios = <&gpio 120 GPIO_ACTIVE_HIGH>; + Vdda-supply = <®_3v3>; + Vdd3-supply = <®_3v3>; + Vcc-supply = <®_va_30v0>; + #sound-dai-cells = <0>; + st,thermal-warning-adjustment; + st,thermal-warning-recovery; + st,fault-detect-recovery; + st,drop-compensation-ns = <80>; + st,max-power-use-mpcc; + st,invalid-input-detect-mute; + /* 2 (half-bridge) and 1 (full-bridge) on-board power */ + st,output-conf = /bits/ 8 <0x1>; + st,needs_esd_watchdog; + }; +}; + +&pinctrl { + xo_audio_pins: xo-audio-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(111) MFP_AF0 /* ENABLE */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + sta320_pins: sta320-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(120) MFP_AF0 /* CODEC_RESET */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); + }; +}; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts new file mode 100644 index 000000000000..36e20cbf8704 --- /dev/null +++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "pxa300-raumfeld-common.dtsi" +#include "pxa300-raumfeld-tuneable-clock.dtsi" + +/ { + model = "Raumfeld Speaker S (PXA3xx)"; + compatible = "raumfeld,raumfeld-speaker-s-pxa303", "marvell,pxa300"; +}; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi b/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi new file mode 100644 index 000000000000..561483b93989 --- /dev/null +++ b/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/clock/maxim,max9485.h> + +/ { + xo_27mhz: oscillator-27mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-accuracy = <100>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "Raumfeld Speaker"; + #address-cells = <1>; + #size-cells = <0>; + + simple-audio-card,dai-link@0 { + reg = <0>; + format = "i2s"; + bitclock-master = <&dailink_master_analog>; + frame-master = <&dailink_master_analog>; + mclk-fs = <256>; + + dailink_master_analog: cpu { + sound-dai = <&ssp_dai0>; + }; + + codec { + sound-dai = <&cs4270>; + }; + }; + }; +}; + +&ssp_dai0 { + clocks = <&max9485 MAX9485_CLKOUT1>; +}; + +&ssp_dai1 { + clocks = <&max9485 MAX9485_CLKOUT1>; +}; + +&pxai2c1 { + cs4270: codec@48 { + compatible = "cirrus,cs4270"; + pinctrl-names = "default"; + pinctrl-0 = <&cs4270_pins>; + reg = <0x48>; + va-supply = <®_va_5v0>; + vd-supply = <®_3v3>; + vlc-supply = <®_3v3>; + reset-gpios = <&gpio 120 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + + max9485: clock-generator@63 { + compatible = "maxim,max9485"; + pinctrl-names = "default"; + pinctrl-0 = <&max9485_pins>; + reg = <0x63>; + vdd-supply = <®_3v3>; + clock-names = "xclk"; + clocks = <&xo_27mhz>; + reset-gpios = <&gpio 111 GPIO_ACTIVE_HIGH>; + #clock-cells = <1>; + }; +}; + +&pinctrl { + cs4270_pins: cs4270-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(120) MFP_AF0 /* RESET */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + max9485_pins: max9485-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(111) MFP_AF0 /* RESET */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; +}; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index 3a8f0edc3af9..e1e607f53ce6 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -151,8 +151,6 @@ pinctrl: pinctrl@40e10000 { compatible = "pinconf-single"; reg = <0x40e10000 0xffff>; - #address-cells = <1>; - #size-cells = <0>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x7>; @@ -204,7 +202,7 @@ status = "disabled"; }; - pxa3xx_ohci: usb@4c000000 { + usb0: usb@4c000000 { compatible = "marvell,pxa-ohci"; reg = <0x4c000000 0x10000>; interrupts = <3>; @@ -275,6 +273,22 @@ clocks = <&clks CLK_SSP4>; status = "disabled"; }; + + timer@40a00000 { + compatible = "marvell,pxa-timer"; + reg = <0x40a00000 0x20>; + interrupts = <26>; + clocks = <&clks CLK_OSTIMER>; + status = "okay"; + }; + + gcu: display-controller@54000000 { + compatible = "marvell,pxa300-gcu"; + reg = <0x54000000 0x1000>; + interrupts = <39>; + clocks = <&clks CLK_PXA300_GCU>; + status = "disabled"; + }; }; clocks { @@ -286,18 +300,10 @@ #size-cells = <1>; ranges; - clks: pxa3xx_clks@41300004 { + clks: clocks { compatible = "marvell,pxa300-clocks"; #clock-cells = <1>; status = "okay"; }; }; - - timer@40a00000 { - compatible = "marvell,pxa-timer"; - reg = <0x40a00000 0x20>; - interrupts = <26>; - clocks = <&clks CLK_OSTIMER>; - status = "okay"; - }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi deleted file mode 100644 index 8df73156b73a..000000000000 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi +++ /dev/null @@ -1,53 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -&tlmm_pinmux { - card_detect: card-detect { - mux { - pins = "gpio26"; - function = "gpio"; - bias-disable; - }; - }; - - pcie_pins: pcie-pinmux { - mux { - pins = "gpio27"; - function = "gpio"; - }; - conf { - pins = "gpio27"; - drive-strength = <12>; - bias-disable; - }; - }; - - user_leds: user-leds { - mux { - pins = "gpio3", "gpio7", "gpio10", "gpio11"; - function = "gpio"; - }; - - conf { - pins = "gpio3", "gpio7", "gpio10", "gpio11"; - function = "gpio"; - output-low; - }; - }; - - magneto_pins: magneto-pins { - mux { - pins = "gpio31", "gpio48"; - function = "gpio"; - bias-disable; - }; - }; -}; - -&pm8921_mpps { - mpp_leds: mpp-leds { - pinconf { - pins = "mpp7", "mpp8"; - function = "digital"; - output-low; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts deleted file mode 100644 index 76b56eafaab9..000000000000 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts +++ /dev/null @@ -1,415 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8064-v2.0.dtsi" -#include "qcom-apq8064-arrow-sd-600eval-pins.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/mfd/qcom-rpm.h> - -/ { - model = "Arrow Electronics, APQ8064 SD_600eval"; - compatible = "arrow,sd_600eval", "qcom,apq8064"; - - aliases { - serial0 = &gsbi7_serial; - serial1 = &gsbi1_serial; - i2c0 = &gsbi2_i2c; - i2c1 = &gsbi3_i2c; - i2c2 = &gsbi4_i2c; - i2c3 = &gsbi7_i2c; - spi0 = &gsbi5_spi; - }; - - regulators { - compatible = "simple-bus"; - vph: regulator-fixed@1 { - compatible = "regulator-fixed"; - regulator-min-microvolt = <4500000>; - regulator-max-microvolt = <4500000>; - regulator-name = "VPH"; - regulator-type = "voltage"; - regulator-boot-on; - }; - - /* on board fixed 3.3v supply */ - vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con: endpoint { - remote-endpoint = <&hdmi_out>; - }; - }; - }; - - soc { - rpm@108000 { - regulators { - vdd_s1-supply = <&vph>; - vdd_s2-supply = <&vph>; - vdd_s3-supply = <&vph>; - vdd_s4-supply = <&vph>; - vdd_s5-supply = <&vph>; - vdd_s6-supply = <&vph>; - vdd_s7-supply = <&vph>; - vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; - vdd_l3_l15_l17-supply = <&vph>; - vdd_l4_l14-supply = <&vph>; - vdd_l5_l8_l16-supply = <&vph>; - vdd_l6_l7-supply = <&vph>; - vdd_l9_l11-supply = <&vph>; - vdd_l10_l22-supply = <&vph>; - vdd_l21_l23_l29-supply = <&vph>; - vdd_l24-supply = <&pm8921_s1>; - vdd_l25-supply = <&pm8921_s1>; - vdd_l26-supply = <&pm8921_s7>; - vdd_l27-supply = <&pm8921_s7>; - vdd_l28-supply = <&pm8921_s7>; - vin_lvs1_3_6-supply = <&pm8921_s4>; - vin_lvs2-supply = <&pm8921_s1>; - vin_lvs4_5_7-supply = <&pm8921_s4>; - - s1 { - regulator-always-on; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - qcom,switch-mode-frequency = <3200000>; - bias-pull-down; - }; - - s2 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - regulator-always-on; - }; - - s3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - qcom,switch-mode-frequency = <4800000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <1600000>; - qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; - bias-pull-down; - regulator-always-on; - }; - - s7 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <3200000>; - }; - - l3 { - regulator-min-microvolt = <3050000>; - regulator-max-microvolt = <3300000>; - bias-pull-down; - }; - - l4 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - l5 { - regulator-min-microvolt = <2750000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - regulator-boot-on; - regulator-always-on; - }; - - l6 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - /** - * 1.8v required on LS expansion - * for mezzanine boards - */ - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - l23 { - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <1900000>; - bias-pull-down; - }; - - lvs6 { - bias-pull-down; - }; - - lvs7 { - bias-pull-down; - }; - }; - }; - - gsbi@12440000 { - status = "okay"; - qcom,mode = <GSBI_PROT_UART_W_FC>; - serial@12450000 { - label = "LS-UART1"; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&gsbi1_uart_4pins>; - }; - }; - - gsbi@12480000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - i2c@124a0000 { - /* On Low speed expansion and Sensors */ - label = "LS-I2C0"; - status = "okay"; - lis3mdl_mag@1e { - compatible = "st,lis3mdl-magn"; - reg = <0x1e>; - vdd-supply = <&vcc3v3>; - vddio-supply = <&pm8921_s4>; - pinctrl-names = "default"; - pinctrl-0 = <&magneto_pins>; - interrupt-parent = <&tlmm_pinmux>; - - st,drdy-int-pin = <2>; - interrupts = <48 IRQ_TYPE_EDGE_RISING>, /* DRDY line */ - <31 IRQ_TYPE_EDGE_RISING>; /* INT */ - }; - }; - }; - - gsbi@16200000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - i2c@16280000 { - /* On Low speed expansion */ - status = "okay"; - label = "LS-I2C1"; - clock-frequency = <200000>; - eeprom@52 { - compatible = "atmel,24c128"; - reg = <0x52>; - pagesize = <64>; - }; - }; - }; - - gsbi@16300000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - i2c@16380000 { - /* On High speed expansion */ - label = "HS-CAM-I2C3"; - status = "okay"; - }; - }; - - gsbi@1a200000 { - status = "okay"; - spi@1a280000 { - /* On Low speed expansion */ - label = "LS-SPI0"; - status = "okay"; - }; - }; - - /* DEBUG UART */ - gsbi@16600000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; - serial@16640000 { - label = "LS-UART0"; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&gsbi7_uart_2pins>; - }; - - i2c@16680000 { - /* On High speed expansion */ - status = "okay"; - label = "HS-CAM-I2C2"; - }; - }; - - leds { - pinctrl-names = "default"; - pinctrl-0 = <&user_leds>, <&mpp_leds>; - - compatible = "gpio-leds"; - - user-led0 { - label = "user0-led"; - gpios = <&tlmm_pinmux 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - - user-led1 { - label = "user1-led"; - gpios = <&tlmm_pinmux 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - - user-led2 { - label = "user2-led"; - gpios = <&tlmm_pinmux 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc1"; - default-state = "off"; - }; - - user-led3 { - label = "user3-led"; - gpios = <&tlmm_pinmux 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "none"; - default-state = "off"; - }; - - wifi-led { - label = "WiFi-led"; - gpios = <&pm8921_mpps 7 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - bt-led { - label = "BT-led"; - gpios = <&pm8921_mpps 8 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - pci@1b500000 { - status = "okay"; - vdda-supply = <&pm8921_s3>; - vdda_phy-supply = <&pm8921_lvs6>; - vdda_refclk-supply = <&vcc3v3>; - pinctrl-0 = <&pcie_pins>; - pinctrl-names = "default"; - perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; - }; - - phy@1b400000 { - status = "okay"; - }; - - sata@29000000 { - status = "okay"; - target-supply = <&pm8921_lvs7>; - }; - - /* OTG */ - usb@12500000 { - status = "okay"; - dr_mode = "peripheral"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - }; - }; - - usb@12520000 { - status = "okay"; - dr_mode = "otg"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - }; - }; - - usb@12530000 { - status = "okay"; - dr_mode = "otg"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - }; - }; - - amba { - /* eMMC */ - sdcc@12400000 { - status = "okay"; - vmmc-supply = <&pm8921_l5>; - vqmmc-supply = <&pm8921_s4>; - }; - - /* External micro SD card */ - sdcc@12180000 { - status = "okay"; - vmmc-supply = <&pm8921_l6>; - pinctrl-names = "default"; - pinctrl-0 = <&card_detect>; - cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - }; - - riva-pil@3204000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; - }; - - hdmi-tx@4a00000 { - status = "okay"; - core-vdda-supply = <&pm8921_hdmi_switch>; - hdmi-mux-supply = <&vcc3v3>; - - hpd-gpio = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&hdmi_con>; - }; - }; - }; - }; - - hdmi-phy@4a00400 { - status = "okay"; - core-vdda-supply = <&pm8921_hdmi_switch>; - }; - - mdp@5100000 { - status = "okay"; - - ports { - port@3 { - endpoint { - remote-endpoint = <&hdmi_in>; - }; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 0e1e98707e3f..899f28533ed7 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -412,7 +412,7 @@ }; sdhci@f9824900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; interrupts = <0 123 0>, <0 138 0>; @@ -425,7 +425,7 @@ }; sdhci@f98a4900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; interrupts = <0 125 0>, <0 221 0>; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index ed8f064d0895..51444c53fc72 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -327,8 +327,7 @@ ak8963@f { compatible = "asahi-kasei,ak8963"; reg = <0x0f>; - // Currently only works in polling mode. - // gpios = <&msmgpio 61 0>; + gpios = <&msmgpio 67 0>; vid-supply = <&pm8941_lvs1>; vdd-supply = <&pm8941_l17>; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index aba159d5a95a..ca266a5f021d 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -427,11 +427,13 @@ }; }; - tsens: thermal-sensor@fc4a8000 { + tsens: thermal-sensor@fc4a9000 { compatible = "qcom,msm8974-tsens"; - reg = <0xfc4a8000 0x2000>; + reg = <0xfc4a9000 0x1000>, /* TM */ + <0xfc4a8000 0x1000>; /* SROT */ nvmem-cells = <&tsens_calib>, <&tsens_backup>; nvmem-cell-names = "calib", "calib_backup"; + #qcom,sensors = <11>; #thermal-sensor-cells = <1>; }; @@ -602,7 +604,7 @@ }; sdhci@f9824900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, @@ -616,7 +618,7 @@ }; sdhci@f9864900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; reg-names = "hc_mem", "core_mem"; interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, @@ -630,7 +632,7 @@ }; sdhci@f98a4900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 383cba68dbba..12ffe73bf2bc 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7740 SoC + * Device Tree Source for the R-Mobile A1 (R8A77400) SoC * * Copyright (C) 2012 Renesas Solutions Corp. */ diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi index 0e2e033cc849..b3fee1d61c87 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi +++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi @@ -31,10 +31,6 @@ }; }; -&cmt0 { - status = "okay"; -}; - &extal_clk { clock-frequency = <20000000>; }; @@ -88,11 +84,6 @@ }; }; -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 24715f74ae08..3cc33f7ff7fe 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -348,8 +348,7 @@ thermal: thermal@e61f0000 { compatible = "renesas,thermal-r8a7743", - "renesas,rcar-gen2-thermal", - "renesas,rcar-thermal"; + "renesas,rcar-gen2-thermal"; reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 522>; diff --git a/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts new file mode 100644 index 000000000000..3e58c2e92e03 --- /dev/null +++ b/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the iWave Systems RZ/G1N Qseven board development + * platform with camera daughter board + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a7744-iwg20m.dtsi" +#include "iwg20d-q7-common.dtsi" +#include "iwg20d-q7-dbcm-ca.dtsi" + +/ { + model = "iWave Systems RZ/G1N Qseven development platform with camera add-on"; + compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744"; +}; diff --git a/arch/arm/boot/dts/r8a7744-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7744-iwg20d-q7.dts new file mode 100644 index 000000000000..1fdac528f274 --- /dev/null +++ b/arch/arm/boot/dts/r8a7744-iwg20d-q7.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the iWave-RZ/G1N Qseven board + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a7744-iwg20m.dtsi" +#include "iwg20d-q7-common.dtsi" + +/ { + model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1N"; + compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744"; +}; diff --git a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi new file mode 100644 index 000000000000..82ee3c1140ef --- /dev/null +++ b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the iWave RZ/G1N Qseven SOM + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +#include "r8a7744.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + compatible = "iwave,g20m", "renesas,r8a7744"; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + mmcif0_pins: mmc { + groups = "mmc_data8_b", "mmc_ctrl"; + function = "mmc"; + }; + + qspi_pins: qspi { + groups = "qspi_ctrl", "qspi_data2"; + function = "qspi"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; +}; + +&mmcif0 { + pinctrl-0 = <&mmcif0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <®_3p3v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + /* WARNING - This device contains the bootloader. Handle with care. */ + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + m25p,fast-read; + spi-cpol; + spi-cpha; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi new file mode 100644 index 000000000000..04148d608fc4 --- /dev/null +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -0,0 +1,1741 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the r8a7744 SoC + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r8a7744-cpg-mssr.h> +#include <dt-bindings/power/r8a7744-sysc.h> + +/ { + compatible = "renesas,r8a7744"; + #address-cells = <2>; + #size-cells = <2>; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "renesas,apmu"; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1500000000>; + clocks = <&cpg CPG_CORE R8A7744_CLK_Z>; + clock-latency = <300000>; /* 300 us */ + power-domains = <&sysc R8A7744_PD_CA15_CPU0>; + next-level-cache = <&L2_CA15>; + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + clock-frequency = <1500000000>; + clocks = <&cpg CPG_CORE R8A7744_CLK_Z>; + clock-latency = <300000>; /* 300 us */ + power-domains = <&sysc R8A7744_PD_CA15_CPU1>; + next-level-cache = <&L2_CA15>; + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; + }; + + L2_CA15: cache-controller-0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + power-domains = <&sysc R8A7744_PD_CA15_SCU>; + }; + }; + + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a7744-wdt", + "renesas,rcar-gen2-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7744", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7744", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7744", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7744", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7744", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7744", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a7744", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 905>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a7744", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 904>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 904>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a7744"; + reg = <0 0xe6060000 0 0x250>; + }; + + tpu: pwm@e60f0000 { + compatible = "renesas,tpu-r8a7744", "renesas,tpu"; + reg = <0 0xe60f0000 0 0x148>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7744-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + apmu@e6152000 { + compatible = "renesas,r8a7744-apmu", "renesas,apmu"; + reg = <0 0xe6152000 0 0x188>; + cpus = <&cpu0 &cpu1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7744-rst"; + reg = <0 0xe6160000 0 0x100>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7744-sysc"; + reg = <0 0xe6180000 0 0x200>; + #power-domain-cells = <1>; + }; + + irqc: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7744", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7744", + "renesas,rcar-gen2-thermal"; + reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; + }; + + ipmmu_sy0: mmu@e6280000 { + compatible = "renesas,ipmmu-r8a7744", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6280000 0 0x1000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_sy1: mmu@e6290000 { + compatible = "renesas,ipmmu-r8a7744", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6290000 0 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ds: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a7744", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6740000 0 0x1000>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mp: mmu@ec680000 { + compatible = "renesas,ipmmu-r8a7744", + "renesas,ipmmu-vmsa"; + reg = <0 0xec680000 0 0x1000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mx: mmu@fe951000 { + compatible = "renesas,ipmmu-r8a7744", + "renesas,ipmmu-vmsa"; + reg = <0 0xfe951000 0 0x1000>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_gp: mmu@e62a0000 { + compatible = "renesas,ipmmu-r8a7744", + "renesas,ipmmu-vmsa"; + reg = <0 0xe62a0000 0 0x1000>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; + }; + + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; + + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x100>; + }; + }; + + icram2: sram@e6300000 { + compatible = "mmio-sram"; + reg = <0 0xe6300000 0 0x40000>; + }; + + /* The memory map in the User's Manual maps the cores to + * bus numbers + */ + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7744", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c1: i2c@e6518000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7744", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6518000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 930>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7744", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6530000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 929>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7744", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6540000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c4: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7744", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6520000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 927>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c5: i2c@e6528000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7744", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6528000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 925>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 925>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + iic0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7744", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + iic1: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7744", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 323>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 323>; + status = "disabled"; + }; + + iic3: i2c@e60b0000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7744"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 926>; + status = "disabled"; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7744", + "renesas,rcar-gen2-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 704>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7744", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a7744-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a7744-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7744", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,dmac-r8a7744", + "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7744", + "renesas,etheravb-rcar-gen2"; + reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 812>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7744", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 917>; + status = "disabled"; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7744", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>; + clock-names = "fck"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7744", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>; + clock-names = "fck"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7744", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c60000 0 0x40>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>; + clock-names = "fck"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + + scifa3: serial@e6c70000 { + compatible = "renesas,scifa-r8a7744", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c70000 0 0x40>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1106>; + clock-names = "fck"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, + <&dmac1 0x1b>, <&dmac1 0x1c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 1106>; + status = "disabled"; + }; + + scifa4: serial@e6c78000 { + compatible = "renesas,scifa-r8a7744", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c78000 0 0x40>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1107>; + clock-names = "fck"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>, + <&dmac1 0x1f>, <&dmac1 0x20>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 1107>; + status = "disabled"; + }; + + scifa5: serial@e6c80000 { + compatible = "renesas,scifa-r8a7744", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c80000 0 0x40>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1108>; + clock-names = "fck"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>, + <&dmac1 0x23>, <&dmac1 0x24>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 1108>; + status = "disabled"; + }; + + scifb0: serial@e6c20000 { + compatible = "renesas,scifb-r8a7744", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c20000 0 0x100>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>; + clock-names = "fck"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scifb1: serial@e6c30000 { + compatible = "renesas,scifb-r8a7744", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c30000 0 0x100>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>; + clock-names = "fck"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scifb2: serial@e6ce0000 { + compatible = "renesas,scifb-r8a7744", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6ce0000 0 0x100>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 216>; + clock-names = "fck"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 216>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7744", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 721>, + <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 721>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7744", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 720>, + <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 720>; + status = "disabled"; + }; + + scif2: serial@e6e58000 { + compatible = "renesas,scif-r8a7744", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e58000 0 0x40>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 719>, + <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 719>; + status = "disabled"; + }; + + scif3: serial@e6ea8000 { + compatible = "renesas,scif-r8a7744", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ea8000 0 0x40>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 718>, + <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 718>; + status = "disabled"; + }; + + scif4: serial@e6ee0000 { + compatible = "renesas,scif-r8a7744", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee0000 0 0x40>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>, + <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, + <&dmac1 0xfb>, <&dmac1 0xfc>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 715>; + status = "disabled"; + }; + + scif5: serial@e6ee8000 { + compatible = "renesas,scif-r8a7744", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee8000 0 0x40>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>, + <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, + <&dmac1 0xfd>, <&dmac1 0xfe>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 714>; + status = "disabled"; + }; + + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7744", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c0000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 717>, + <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 717>; + status = "disabled"; + }; + + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7744", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c8000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>, + <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + }; + + hscif2: serial@e62d0000 { + compatible = "renesas,hscif-r8a7744", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62d0000 0 0x60>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 713>, + <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 713>; + status = "disabled"; + }; + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7744", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 000>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 000>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7744", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 208>; + status = "disabled"; + }; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7744", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 205>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 205>; + status = "disabled"; + }; + + can0: can@e6e80000 { + compatible = "renesas,can-r8a7744", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7744_CLK_RCAN>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6e88000 { + compatible = "renesas,can-r8a7744", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A7744_CLK_RCAN>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7744", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7744", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 810>; + status = "disabled"; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7744", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 809>; + status = "disabled"; + }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7744", + "renesas,rcar_sound-gen2"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, + <&cpg CPG_CORE R8A7744_CLK_M2>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", "src.5", + "src.4", "src.3", "src.2", "src.1", "src.0", + "ctu.0", "ctu.1", + "mix.0", "mix.1", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0"; + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,src { + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a7744", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <13>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a7744", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <13>; + }; + + /* + * pci1 and xhci share the same phy, therefore only one of them + * can be active at any one time. If both of them are enabled, + * a race condition will determine who'll control the phy. + * A firmware file is needed by the xhci driver in order for + * USB 3.0 to work properly. + */ + xhci: usb@ee000000 { + compatible = "renesas,xhci-r8a7744", + "renesas,rcar-gen2-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 328>; + phys = <&usb2 1>; + phy-names = "usb"; + status = "disabled"; + }; + + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7744", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; + + pci1: pci@ee0d0000 { + compatible = "renesas,pci-r8a7744", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x10800 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x11000 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7744", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee100000 0 0x328>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee140000 { + compatible = "renesas,sdhi-r8a7744", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a7744", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee160000 0 0x100>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7744", + "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 315>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 315>; + reg-io-width = <4>; + max-frequency = <97500000>; + status = "disabled"; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>, + <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + vsp@fe928000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe928000 0 0x8000>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 131>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 131>; + }; + + vsp@fe930000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe930000 0 0x8000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 128>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 128>; + }; + + vsp@fe938000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe938000 0 0x8000>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 127>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 127>; + }; + + pciec: pcie@fe000000 { + compatible = "renesas,pcie-r8a7744", + "renesas,pcie-rcar-gen2"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 + 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + + du: display@feb00000 { + reg = <0 0xfeb00000 0 0x40000>, + <0 0xfeb90000 0 0x1c>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + }; + }; + }; + /* placeholder */ + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + + cmt0: timer@ffca0000 { + compatible = "renesas,r8a7744-cmt0", + "renesas,rcar-gen2-cmt0"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a7744-cmt1", + "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 329>; + clock-names = "fck"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 329>; + status = "disabled"; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <95000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; +}; diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts index 22da819f186b..40b7f98d6013 100644 --- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts +++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts @@ -6,6 +6,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "r8a77470.dtsi" / { model = "iWave iW-RainboW-G23S single board computer based on RZ/G1C"; @@ -25,9 +26,43 @@ device_type = "memory"; reg = <0 0x40000000 0 0x20000000>; }; + + reg_1p8v: reg-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: reg-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vccq_sdhi2: regulator-vccq-sdhi2 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI2 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; }; &avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + phy-handle = <&phy3>; phy-mode = "gmii"; renesas,no-ether-link; @@ -41,15 +76,73 @@ }; }; +&cmt0 { + status = "okay"; +}; + &extal_clk { clock-frequency = <20000000>; }; &pfc { + avb_pins: avb { + groups = "avb_mdio", "avb_gmii_tx_rx"; + function = "avb"; + }; + + mmc_pins_uhs: mmc_uhs { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data2"; + function = "qspi0"; + }; + scif1_pins: scif1 { groups = "scif1_data_b"; function = "scif1"; }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; +}; + +&qspi0 { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + /* WARNING - This device contains the bootloader. Handle with care. */ + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "issi,is25lp016d", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <133000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + m25p,fast-read; + spi-cpol; + spi-cpha; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; }; &scif1 { @@ -58,3 +151,29 @@ status = "okay"; }; + +&sdhi1 { + pinctrl-0 = <&mmc_pins_uhs>; + pinctrl-names = "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; + status = "okay"; +}; + +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi2>; + bus-width = <4>; + cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>; + sd-uhs-sdr50; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index 9ec78d3d0ca8..f4e232bf9d03 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -14,6 +14,14 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -71,6 +79,16 @@ #size-cells = <2>; ranges; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a77470-wdt", + "renesas,rcar-gen2-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a77470", "renesas,rcar-gen2-gpio"; @@ -237,6 +255,62 @@ reg = <0 0xe6300000 0 0x20000>; }; + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77470", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c1: i2c@e6518000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77470", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6518000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 930>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77470", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6530000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 929>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77470", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6540000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + i2c4: i2c@e6520000 { #address-cells = <1>; #size-cells = <0>; @@ -251,6 +325,62 @@ status = "disabled"; }; + usb_dmac00: dma-controller@e65a0000 { + compatible = "renesas,r8a77470-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac10: dma-controller@e65b0000 { + compatible = "renesas,r8a77470-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac01: dma-controller@e65a8000 { + compatible = "renesas,r8a77470-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a8000 0 0x100>; + interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 326>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 326>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac11: dma-controller@e65b8000 { + compatible = "renesas,r8a77470-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b8000 0 0x100>; + interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 327>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 327>; + #dma-cells = <1>; + dma-channels = <2>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a77470", "renesas,rcar-dmac"; @@ -330,6 +460,38 @@ status = "disabled"; }; + qspi0: spi@e6b10000 { + compatible = "renesas,qspi-r8a77470", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 918>; + status = "disabled"; + }; + + qspi1: spi@ee200000 { + compatible = "renesas,qspi-r8a77470", "renesas,qspi"; + reg = <0 0xee200000 0 0x2c>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 917>; + status = "disabled"; + }; + scif0: serial@e6e60000 { compatible = "renesas,scif-r8a77470", "renesas,rcar-gen2-scif", "renesas,scif"; @@ -426,6 +588,32 @@ status = "disabled"; }; + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a77470", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee100000 0 0x328>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <156000000>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee300000 { + compatible = "renesas,sdhi-mmc-r8a77470"; + reg = <0 0xee300000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <156000000>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 313>; + status = "disabled"; + }; + sdhi2: sd@ee160000 { compatible = "renesas,sdhi-r8a77470", "renesas,rcar-gen2-sdhi"; @@ -435,7 +623,7 @@ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <97500000>; + max-frequency = <78000000>; power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 312>; status = "disabled"; @@ -459,6 +647,38 @@ compatible = "renesas,prr"; reg = <0 0xff000044 0 4>; }; + + cmt0: timer@ffca0000 { + compatible = "renesas,r8a77470-cmt0", + "renesas,rcar-gen2-cmt0"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a77470-cmt1", + "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 329>; + clock-names = "fck"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 329>; + status = "disabled"; + }; }; timer { diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 50312e752e2f..7b9508e83d46 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -489,8 +489,6 @@ }; &lvds1 { - status = "okay"; - ports { port@1 { lvds_connector: endpoint { diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index ce22db01fbba..e6580aa0cea3 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -479,8 +479,6 @@ }; &lvds0 { - status = "okay"; - ports { port@1 { lvds_connector: endpoint { diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index f02036e5de01..fefdf8238bbe 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -482,8 +482,6 @@ }; &lvds0 { - status = "okay"; - ports { port@1 { lvds_connector: endpoint { diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi index eaf94976ed6d..4c1ab49c7d39 100644 --- a/arch/arm/boot/dts/r9a06g032.dtsi +++ b/arch/arm/boot/dts/r9a06g032.dtsi @@ -165,7 +165,15 @@ status = "disabled"; }; - gic: gic@44101000 { + pinctrl: pin-controller@40067000 { + compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl"; + reg = <0x40067000 0x1000>, <0x51000000 0x480>; + clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>; + clock-names = "bus"; + status = "okay"; + }; + + gic: interrupt-controller@44101000 { compatible = "arm,cortex-a7-gic", "arm,gic-400"; interrupt-controller; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 2ab3c4b32003..30dc8af0bdcb 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/clock/rk3066a-cru.h> +#include <dt-bindings/power/rk3066-power.h> #include "rk3xxx.dtsi" / { @@ -70,6 +71,7 @@ clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; rockchip,playback-channels = <8>; rockchip,capture-channels = <2>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -87,6 +89,7 @@ clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -104,6 +107,7 @@ clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -595,6 +599,7 @@ "ppmmu2", "pp3", "ppmmu3"; + power-domains = <&power RK3066_PD_GPU>; }; &i2c0 { @@ -643,6 +648,56 @@ dma-names = "rx-tx"; }; +&pmu { + power: power-controller { + compatible = "rockchip,rk3066-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + pd_vio@RK3066_PD_VIO { + reg = <RK3066_PD_VIO>; + clocks = <&cru ACLK_LCDC0>, + <&cru ACLK_LCDC1>, + <&cru DCLK_LCDC0>, + <&cru DCLK_LCDC1>, + <&cru HCLK_LCDC0>, + <&cru HCLK_LCDC1>, + <&cru SCLK_CIF1>, + <&cru ACLK_CIF1>, + <&cru HCLK_CIF1>, + <&cru SCLK_CIF0>, + <&cru ACLK_CIF0>, + <&cru HCLK_CIF0>, + <&cru ACLK_IPP>, + <&cru HCLK_IPP>, + <&cru ACLK_RGA>, + <&cru HCLK_RGA>; + pm_qos = <&qos_lcdc0>, + <&qos_lcdc1>, + <&qos_cif0>, + <&qos_cif1>, + <&qos_ipp>, + <&qos_rga>; + }; + + pd_video@RK3066_PD_VIDEO { + reg = <RK3066_PD_VIDEO>; + clocks = <&cru ACLK_VDPU>, + <&cru ACLK_VEPU>, + <&cru HCLK_VDPU>, + <&cru HCLK_VEPU>; + pm_qos = <&qos_vpu>; + }; + + pd_gpu@RK3066_PD_GPU { + reg = <RK3066_PD_GPU>; + clocks = <&cru ACLK_GPU>; + pm_qos = <&qos_gpu>; + }; + }; +}; + &pwm0 { pinctrl-names = "default"; pinctrl-0 = <&pwm0_out>; diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts new file mode 100644 index 000000000000..a7477a09fbe8 --- /dev/null +++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts @@ -0,0 +1,711 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 MundoReader S.L. + * Author: Heiko Stuebner <heiko.stuebner@bq.com> + */ + +/dts-v1/; +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/input/input.h> +#include "rk3188.dtsi" + +/ { + model = "BQ Edison2 Quad-Core"; + compatible = "mundoreader,bq-edison2qc", "rockchip,rk3188"; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vsys>; + pwms = <&pwm1 0 25000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key &usb_int>; + + power { + gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "GPIO Key Power"; + linux,input-type = <1>; + debounce-interval = <100>; + wakeup-source; + }; + + wake_on_usb: wake-on-usb { + label = "Wake-on-USB"; + gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_hold>; + /* only drive the pin low until device is off */ + active-delay-ms = <3000>; + }; + + lvds-encoder { + compatible = "ti,sn75lvds83", "lvds-encoder"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds_in_vop0: endpoint { + remote-endpoint = <&vop0_out_lvds>; + }; + }; + + port@1 { + reg = <1>; + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + + panel { + compatible = "innolux,ee101ia-01d", "panel-lvds"; + backlight = <&backlight>; + + /* pin LCD_CS, Nshtdn input of lvds-encoder */ + enable-gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_cs>; + power-supply = <&vcc_lcd>; + + data-mapping = "vesa-24"; + height-mm = <163>; + width-mm = <261>; + + panel-timing { + clock-frequency = <72000000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <160>; + hfront-porch = <16>; + hsync-len = <10>; + vback-porch = <23>; + vfront-porch = <12>; + vsync-len = <3>; + }; + + port { + panel_in_lvds: endpoint { + remote-endpoint = <&lvds_out_panel>; + }; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on>; + reset-gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>; + }; + + avdd_cif: cif-avdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd-cif"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cif_avdd_en>; + startup-delay-us = <100000>; + vin-supply = <&vcc28_cif>; + }; + + vcc_5v: vcc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&v5_drv>; + vin-supply = <&vsys>; + }; + + vcc_lcd: lcd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc-lcd"; + gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_en>; + startup-delay-us = <50000>; + vin-supply = <&vcc_io>; + }; + + vcc_otg: usb-otg-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc-otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_drv>; + startup-delay-us = <100000>; + vin-supply = <&vcc_5v>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + vccq_emmc: emmc-vccq-regulator { + compatible = "regulator-fixed"; + regulator-name = "vccq-emmc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <&vcc_io>; + }; + + /* supplied from the bq24196 */ + vsys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&cru { + assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>, + <&cru ACLK_CPU>, + <&cru HCLK_CPU>, <&cru PCLK_CPU>, + <&cru ACLK_PERI>, <&cru HCLK_PERI>, + <&cru PCLK_PERI>; + assigned-clock-rates = <594000000>, <504000000>, + <300000000>, + <150000000>, <75000000>, + <300000000>, <150000000>, + <75000000>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vccq_emmc>; + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + lis3de: accelerometer@29 { + compatible = "st,lis3de"; + reg = <0x29>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB7 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&gsensor_int>; + rotation-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + vdd-supply = <&vcc_io>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + tmp108@48 { + compatible = "ti,tmp108"; + reg = <0x48>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&tmp_alrt>; + #thermal-sensor-cells = <0>; + }; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int>; + #clock-cells = <0>; + clock-output-names = "xin32k"; + }; + + bat: battery@55 { + compatible = "ti,bq27541"; + reg = <0x55>; + power-supplies = <&bq24196>; + }; + + act8846: pmic@5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + pinctrl-names = "default"; + pinctrl-0 = <&dvs0_ctl &pmic_int>; + + vp1-supply = <&vsys>; + vp2-supply = <&vsys>; + vp3-supply = <&vsys>; + vp4-supply = <&vsys>; + inl1-supply = <&vcc_io>; + inl2-supply = <&vsys>; + inl3-supply = <&vsys>; + + regulators { + vcc_ddr: REG1 { + regulator-name = "VCC_DDR"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd_log: REG2 { + regulator-name = "VDD_LOG"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd_arm: REG3 { + regulator-name = "VDD_ARM"; + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vcc_io: vcc_hdmi: REG4 { + regulator-name = "VCC_IO"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vdd_10: REG5 { + regulator-name = "VDD_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vdd_12: REG6 { + regulator-name = "VDD_12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc18_cif: REG7 { + regulator-name = "VCC18_CIF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcca_33: REG8 { + regulator-name = "VCCA_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcc_tp: REG9 { + regulator-name = "VCC_TP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccio_wl: REG10 { + regulator-name = "VCCIO_WL"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vcc_18: REG11 { + regulator-name = "VCC_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc28_cif: REG12 { + regulator-name = "VCC28_CIF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + }; + }; + + bq24196: charger@6b { + compatible = "ti,bq24196"; + reg = <0x6b>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD7 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&charger_int &chg_ctl &otg_en>; + ti,system-minimum-microvolt = <3200000>; + monitored-battery = <&bat>; + omit-battery-class; + + usb_otg_vbus: usb-otg-vbus { }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + + rt5616: codec@1b { + compatible = "realtek,rt5616"; + reg = <0x1b>; + clocks = <&cru SCLK_I2S0>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mmc0 { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&mmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>; + vmmcq-supply = <&vccio_wl>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio3>; + interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + brcm,drive-strength = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake>; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + act8846 { + dvs0_ctl: dvs0-ctl { + rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_low>; + }; + + pmic_int: pmic-int { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + bq24196 { + charger_int: charger-int { + rockchip,pins = <0 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + /* pin hog to make it select usb profile */ + chg_ctl: chg-ctl { + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>; + }; + + /* low: charging, high: complete, fault: blinking */ + chg_det: chg-det { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* charging enabled when pin low and register set */ + chg_en: chg-en { + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>; + }; + + /* bq29196 powergood (when low) signal */ + dc_det: dc-det { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* wire bq24196 otg pin to high, to enable 500mA charging */ + otg_en: otg-en { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + camera { + cif0_pdn: cif0-pdn { + rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + cif1_pdn: cif1-pdn { + rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + cif_avdd_en: cif-avdd-en { + rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + display { + lcd_cs: lcd-cs { + rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + lcd_en: lcd-en { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + ft5606 { + tp_int: tp-int { + rockchip,pins = <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + tp_rst: tp-rst { + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hdmi { + hdmi_int: hdmi-int { + rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + hdmi_rst: hdmi-rst { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + rtc_int: rtc-int { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + keys { + pwr_hold: pwr-hold { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pwr_key: pwr-key { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + lis3de { + gsensor_int: gsensor-int { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + mmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + tmp108 { + tmp_alrt: tmp-alrt { + rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + v5_drv: v5-drv { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + otg_drv: otg-drv { + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_int: usb-int { + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rk903 { + bt_host_wake: bt-host-wake { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + bt_reg_on: bt-reg-on { + rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* pin hog to pull the reset high */ + bt_rst: bt-rst { + rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_output_high>; + }; + + bt_wake: bt-wake { + rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake: wifi-host-wake { + rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + wifi_reg_on: wifi-reg-on { + rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_18>; + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + device-wakeup-gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake &bt_reg_on &bt_rst &bt_wake>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + pinctrl-0 = <&uart3_xfer &uart3_cts &uart3_rts>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&vop0 { + status = "okay"; +}; + +&vop0_out { + vop0_out_lvds: endpoint { + remote-endpoint = <&lvds_in_vop0>; + }; +}; + +&vop1 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdc1_dclk &lcdc1_den &lcdc1_hsync + &lcdc1_vsync &lcdc1_rgb24>; + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts index 375129b62102..9ae65c767c90 100644 --- a/arch/arm/boot/dts/rk3188-px3-evb.dts +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts @@ -44,7 +44,19 @@ }; &cpu0 { - cpu0-supply = <&vdd_cpu>; + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; }; &emmc { diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 4a2890618f6f..94bc81c24049 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -138,7 +138,19 @@ }; &cpu0 { - cpu0-supply = <&vdd_arm>; + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; }; &gpu { diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index b6f790973736..4acb501dd3f8 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/clock/rk3188-cru.h> +#include <dt-bindings/power/rk3188-power.h> #include "rk3xxx.dtsi" / { @@ -22,37 +23,74 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x0>; - operating-points = < - /* kHz uV */ - 1608000 1350000 - 1416000 1250000 - 1200000 1150000 - 1008000 1075000 - 816000 975000 - 600000 950000 - 504000 925000 - 312000 875000 - >; clock-latency = <40000>; clocks = <&cru ARMCLK>; + operating-points-v2 = <&cpu0_opp_table>; + resets = <&cru SRST_CORE0>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x1>; + operating-points-v2 = <&cpu0_opp_table>; + resets = <&cru SRST_CORE1>; }; - cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x2>; + operating-points-v2 = <&cpu0_opp_table>; + resets = <&cru SRST_CORE2>; }; - cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x3>; + operating-points-v2 = <&cpu0_opp_table>; + resets = <&cru SRST_CORE3>; + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <875000>; + clock-latency-ns = <40000>; + }; + opp-504000000 { + opp-hz = /bits/ 64 <504000000>; + opp-microvolt = <925000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <950000>; + opp-suspend; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <975000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1075000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1150000>; + }; + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1250000>; + }; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <1350000>; }; }; @@ -80,6 +118,7 @@ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_LCDC0>, <&cru DCLK_LCDC0>, <&cru HCLK_LCDC0>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3188_PD_VIO>; resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>; reset-names = "axi", "ahb", "dclk"; status = "disabled"; @@ -96,6 +135,7 @@ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_LCDC1>, <&cru DCLK_LCDC1>, <&cru HCLK_LCDC1>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3188_PD_VIO>; resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>; reset-names = "axi", "ahb", "dclk"; status = "disabled"; @@ -136,6 +176,7 @@ clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -620,6 +661,7 @@ "ppmmu2", "pp3", "ppmmu3"; + power-domains = <&power RK3188_PD_GPU>; }; &i2c0 { @@ -652,6 +694,53 @@ pinctrl-0 = <&i2c4_xfer>; }; +&pmu { + power: power-controller { + compatible = "rockchip,rk3188-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + pd_vio@RK3188_PD_VIO { + reg = <RK3188_PD_VIO>; + clocks = <&cru ACLK_LCDC0>, + <&cru ACLK_LCDC1>, + <&cru DCLK_LCDC0>, + <&cru DCLK_LCDC1>, + <&cru HCLK_LCDC0>, + <&cru HCLK_LCDC1>, + <&cru SCLK_CIF0>, + <&cru ACLK_CIF0>, + <&cru HCLK_CIF0>, + <&cru ACLK_IPP>, + <&cru HCLK_IPP>, + <&cru ACLK_RGA>, + <&cru HCLK_RGA>; + pm_qos = <&qos_lcdc0>, + <&qos_lcdc1>, + <&qos_cif0>, + <&qos_cif1>, + <&qos_ipp>, + <&qos_rga>; + }; + + pd_video@RK3188_PD_VIDEO { + reg = <RK3188_PD_VIDEO>; + clocks = <&cru ACLK_VDPU>, + <&cru ACLK_VEPU>, + <&cru HCLK_VDPU>, + <&cru HCLK_VEPU>; + pm_qos = <&qos_vpu>; + }; + + pd_gpu@RK3188_PD_GPU { + reg = <RK3188_PD_GPU>; + clocks = <&cru ACLK_GPU>; + pm_qos = <&qos_gpu>; + }; + }; +}; + &pwm0 { pinctrl-names = "default"; pinctrl-0 = <&pwm0_out>; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index cd8f2a3b0e91..29f19076dceb 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -493,12 +493,18 @@ map0 { trip = <&cpu_alert0>; cooling-device = - <&cpu0 THERMAL_NO_LIMIT 6>; + <&cpu0 THERMAL_NO_LIMIT 6>, + <&cpu1 THERMAL_NO_LIMIT 6>, + <&cpu2 THERMAL_NO_LIMIT 6>, + <&cpu3 THERMAL_NO_LIMIT 6>; }; map1 { trip = <&cpu_alert1>; cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 50325489c0ce..32e1ab336662 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -25,7 +25,7 @@ vcc_flash: flash-regulator { compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; + regulator-name = "vcc_flash"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; startup-delay-us = <150>; diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts index 1e0158acf895..d889ab3c8235 100644 --- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts @@ -81,8 +81,10 @@ */ cpu_warm_limit_cpu { trip = <&cpu_alert_warm>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT 4>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT 4>, + <&cpu1 THERMAL_NO_LIMIT 4>, + <&cpu2 THERMAL_NO_LIMIT 4>, + <&cpu3 THERMAL_NO_LIMIT 4>; }; /* @@ -103,23 +105,25 @@ */ cpu_almost_hot_limit_cpu { trip = <&cpu_alert_almost_hot>; - cooling-device = - <&cpu0 5 6>; + cooling-device = <&cpu0 5 6>, <&cpu1 5 6>, <&cpu2 5 6>, + <&cpu3 5 6>; }; cpu_hot_limit_cpu { trip = <&cpu_alert_hot>; - cooling-device = - <&cpu0 7 7>; + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, <&cpu2 7 7>, + <&cpu3 7 7>; }; cpu_hotter_limit_cpu { trip = <&cpu_alert_hotter>; - cooling-device = - <&cpu0 7 8>; + cooling-device = <&cpu0 7 8>, <&cpu1 7 8>, <&cpu2 7 8>, + <&cpu3 7 8>; }; cpu_very_hot_limit_cpu { trip = <&cpu_alert_very_hot>; - cooling-device = - <&cpu0 8 THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 8 THERMAL_NO_LIMIT>, + <&cpu1 8 THERMAL_NO_LIMIT>, + <&cpu2 8 THERMAL_NO_LIMIT>, + <&cpu3 8 THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 0840ffb3205c..ca7d52daa8fb 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -508,12 +508,18 @@ map0 { trip = <&cpu_alert0>; cooling-device = - <&cpu0 THERMAL_NO_LIMIT 6>; + <&cpu0 THERMAL_NO_LIMIT 6>, + <&cpu1 THERMAL_NO_LIMIT 6>, + <&cpu2 THERMAL_NO_LIMIT 6>, + <&cpu3 THERMAL_NO_LIMIT 6>; }; map1 { trip = <&cpu_alert1>; cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -541,7 +547,10 @@ map0 { trip = <&gpu_alert0>; cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -1223,6 +1232,18 @@ }; }; + vpu: video-codec@ff9a0000 { + compatible = "rockchip,rk3288-vpu"; + reg = <0x0 0xff9a0000 0x0 0x800>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vepu", "vdpu"; + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; + clock-names = "aclk", "hclk"; + iommus = <&vpu_mmu>; + power-domains = <&power RK3288_PD_VIDEO>; + }; + vpu_mmu: iommu@ff9a0800 { compatible = "rockchip,iommu"; reg = <0x0 0xff9a0800 0x0 0x100>; @@ -1231,7 +1252,7 @@ clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; clock-names = "aclk", "iface"; #iommu-cells = <0>; - status = "disabled"; + power-domains = <&power RK3288_PD_VIDEO>; }; hevc_mmu: iommu@ff9c0440 { diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index d752dc611fd7..97307a405e60 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -147,6 +147,46 @@ status = "disabled"; }; + qos_gpu: qos@1012d000 { + compatible = "syscon"; + reg = <0x1012d000 0x20>; + }; + + qos_vpu: qos@1012e000 { + compatible = "syscon"; + reg = <0x1012e000 0x20>; + }; + + qos_lcdc0: qos@1012f000 { + compatible = "syscon"; + reg = <0x1012f000 0x20>; + }; + + qos_cif0: qos@1012f080 { + compatible = "syscon"; + reg = <0x1012f080 0x20>; + }; + + qos_ipp: qos@1012f100 { + compatible = "syscon"; + reg = <0x1012f100 0x20>; + }; + + qos_lcdc1: qos@1012f180 { + compatible = "syscon"; + reg = <0x1012f180 0x20>; + }; + + qos_cif1: qos@1012f200 { + compatible = "syscon"; + reg = <0x1012f200 0x20>; + }; + + qos_rga: qos@1012f280 { + compatible = "syscon"; + reg = <0x1012f280 0x20>; + }; + usb_otg: usb@10180000 { compatible = "rockchip,rk3066-usb", "snps,dwc2"; reg = <0x10180000 0x40000>; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index ed8f6ca52c5b..d31370ff28f4 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -32,6 +32,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0xf00>; + clock-latency = <40000>; clocks = <&cru ARMCLK>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <75>; @@ -66,13 +67,14 @@ arm-pmu { compatible = "arm,cortex-a7-pmu"; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; }; timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>, <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + arm,cpu-registers-not-fw-configured; clock-frequency = <24000000>; }; @@ -117,6 +119,8 @@ clock-frequency = <24000000>; clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; clock-names = "baudclk", "apb_pclk"; + dmas = <&pdma 6>, <&pdma 7>; + #dma-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&uart2m0_xfer>; status = "disabled"; @@ -131,6 +135,8 @@ clock-frequency = <24000000>; clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; clock-names = "baudclk", "apb_pclk"; + dmas = <&pdma 4>, <&pdma 5>; + #dma-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&uart1_xfer>; status = "disabled"; @@ -145,6 +151,8 @@ clock-frequency = <24000000>; clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; clock-names = "baudclk", "apb_pclk"; + dmas = <&pdma 2>, <&pdma 3>; + #dma-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; status = "disabled"; @@ -285,6 +293,14 @@ }; }; + timer: timer@10350000 { + compatible = "rockchip,rv1108-timer", "rockchip,rk3288-timer"; + reg = <0x10350000 0x20>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&xin24m>, <&cru PCLK_TIMER>; + clock-names = "timer", "pclk"; + }; + watchdog: wdt@10360000 { compatible = "snps,dw-wdt"; reg = <0x10360000 0x100>; @@ -516,6 +532,28 @@ status = "disabled"; }; + gmac: eth@30200000 { + compatible = "rockchip,rv1108-gmac"; + reg = <0x30200000 0x10000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&cru SCLK_MAC>, + <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_RX>, + <&cru SCLK_MAC_REF>, <&cru SCLK_MAC_REFOUT>, + <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; + clock-names = "stmmaceth", + "mac_clk_rx", "mac_clk_tx", + "clk_mac_ref", "clk_mac_refout", + "aclk_mac", "pclk_mac"; + /* rv1108 only supports an rmii interface */ + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins>; + rockchip,grf = <&grf>; + status = "disabled"; + }; + gic: interrupt-controller@32010000 { compatible = "arm,gic-400"; interrupt-controller; @@ -541,7 +579,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x20030000 0x100>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&xin24m>; + clocks = <&cru PCLK_GPIO0_PMU>; gpio-controller; #gpio-cells = <2>; @@ -554,7 +592,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x10310000 0x100>; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&xin24m>; + clocks = <&cru PCLK_GPIO1>; gpio-controller; #gpio-cells = <2>; @@ -567,7 +605,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x10320000 0x100>; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&xin24m>; + clocks = <&cru PCLK_GPIO2>; gpio-controller; #gpio-cells = <2>; @@ -580,7 +618,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x10330000 0x100>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&xin24m>; + clocks = <&cru PCLK_GPIO3>; gpio-controller; #gpio-cells = <2>; @@ -641,6 +679,42 @@ input-enable; }; + emmc { + emmc_bus8: emmc-bus8 { + rockchip,pins = <2 RK_PA0 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA1 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA2 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA3 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA4 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA5 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA6 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA7 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + }; + + emmc_clk: emmc-clk { + rockchip,pins = <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <2 RK_PB4 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + }; + }; + + gmac { + rmii_pins: rmii-pins { + rockchip,pins = <1 RK_PC5 RK_FUNC_2 &pcfg_pull_none>, + <1 RK_PC3 RK_FUNC_2 &pcfg_pull_none>, + <1 RK_PC4 RK_FUNC_2 &pcfg_pull_none>, + <1 RK_PB2 RK_FUNC_3 &pcfg_pull_none_drv_12ma>, + <1 RK_PB3 RK_FUNC_3 &pcfg_pull_none_drv_12ma>, + <1 RK_PB4 RK_FUNC_3 &pcfg_pull_none_drv_12ma>, + <1 RK_PB5 RK_FUNC_3 &pcfg_pull_none>, + <1 RK_PB6 RK_FUNC_3 &pcfg_pull_none>, + <1 RK_PB7 RK_FUNC_3 &pcfg_pull_none>, + <1 RK_PC2 RK_FUNC_3 &pcfg_pull_none>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <0 RK_PB1 RK_FUNC_1 &pcfg_pull_none_smt>, diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 75f454a210d6..12eac8930eac 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -627,6 +627,15 @@ samsung,lcd-wb; }; }; + + jpeg_codec: jpeg-codec@fb600000 { + compatible = "samsung,s5pv210-jpeg"; + reg = <0xfb600000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <8>; + clocks = <&clocks CLK_JPEG>; + clock-names = "jpeg"; + }; }; }; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index dd0dda6ed44b..dc2280d9127f 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -84,7 +84,7 @@ compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0x740000 0x1000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "apb_pclk"; in-ports { @@ -100,7 +100,7 @@ compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0x73C000 0x1000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "apb_pclk"; out-ports { @@ -154,7 +154,7 @@ reg = <0x00300000 0x100000 0xfc02c000 0x400>; interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udphs_clk>, <&utmi>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; @@ -281,7 +281,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00400000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -290,7 +290,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00500000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>; + clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 41>; clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; @@ -314,7 +314,7 @@ 0x1 0x0 0x60000000 0x10000000 0x2 0x0 0x70000000 0x10000000 0x3 0x0 0x80000000 0x10000000>; - clocks = <&h32ck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>; status = "disabled"; nand_controller: nand-controller { @@ -333,7 +333,7 @@ compatible = "atmel,sama5d2-sdhci"; reg = <0xa0000000 0x300>; interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 31>, <&pmc PMC_TYPE_GCK 31>, <&pmc PMC_TYPE_CORE PMC_MAIN>; clock-names = "hclock", "multclk", "baseclk"; status = "disabled"; }; @@ -342,7 +342,7 @@ compatible = "atmel,sama5d2-sdhci"; reg = <0xb0000000 0x300>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_GCK 32>, <&pmc PMC_TYPE_CORE PMC_MAIN>; clock-names = "hclock", "multclk", "baseclk"; status = "disabled"; }; @@ -362,7 +362,7 @@ compatible = "atmel,sama5d2-hlcdc"; reg = <0xf0000000 0x2000>; interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>; clock-names = "periph_clk","sys_clk", "slow_clk"; status = "disabled"; @@ -388,7 +388,7 @@ compatible = "atmel,sama5d2-isc"; reg = <0xf0008000 0x4000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&isc_clk>, <&iscck>, <&isc_gclk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 18>, <&pmc PMC_TYPE_GCK 46>; clock-names = "hclock", "iscck", "gck"; #clock-cells = <0>; clock-output-names = "isc-mck"; @@ -398,7 +398,7 @@ ramc0: ramc@f000c000 { compatible = "atmel,sama5d3-ddramc"; reg = <0xf000c000 0x200>; - clocks = <&ddrck>, <&mpddr_clk>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "ddrck", "mpddr"; }; @@ -407,7 +407,7 @@ reg = <0xf0010000 0x1000>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <1>; - clocks = <&dma0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "dma_clk"; }; @@ -417,7 +417,7 @@ reg = <0xf0004000 0x1000>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <1>; - clocks = <&dma1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "dma_clk"; }; @@ -425,559 +425,9 @@ compatible = "atmel,sama5d2-pmc", "syscon"; reg = <0xf0014000 0x160>; interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_rc_osc: main_rc_osc { - compatible = "atmel,at91sam9x5-clk-main-rc-osc"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MOSCRCS>; - clock-frequency = <12000000>; - clock-accuracy = <100000000>; - }; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91sam9x5-clk-main"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MOSCSELS>; - clocks = <&main_rc_osc &main_osc>; - }; - - plla: pllack { - compatible = "atmel,sama5d3-clk-pll"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <12000000 12000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>; - }; - - plladiv: plladivck { - compatible = "atmel,at91sam9x5-clk-plldiv"; - #clock-cells = <0>; - clocks = <&plla>; - }; - - audio_pll_frac: audiopll_fracck { - compatible = "atmel,sama5d2-clk-audio-pll-frac"; - #clock-cells = <0>; - clocks = <&main>; - }; - - audio_pll_pad: audiopll_padck { - compatible = "atmel,sama5d2-clk-audio-pll-pad"; - #clock-cells = <0>; - clocks = <&audio_pll_frac>; - }; - - audio_pll_pmc: audiopll_pmcck { - compatible = "atmel,sama5d2-clk-audio-pll-pmc"; - #clock-cells = <0>; - clocks = <&audio_pll_frac>; - }; - - utmi: utmick { - compatible = "atmel,at91sam9x5-clk-utmi"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_LOCKU>; - clocks = <&main>; - }; - - mck: masterck { - compatible = "atmel,at91sam9x5-clk-master"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; - atmel,clk-output-range = <124000000 166000000>; - atmel,clk-divisors = <1 2 4 3>; - }; - - h32ck: h32mxck { - #clock-cells = <0>; - compatible = "atmel,sama5d4-clk-h32mx"; - clocks = <&mck>; - }; - - usb: usbck { - compatible = "atmel,at91sam9x5-clk-usb"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - prog: progck { - compatible = "atmel,at91sam9x5-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - - prog2: prog2 { - #clock-cells = <0>; - reg = <2>; - interrupts = <AT91_PMC_PCKRDY(2)>; - }; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - ddrck: ddrck { - #clock-cells = <0>; - reg = <2>; - clocks = <&mck>; - }; - - lcdck: lcdck { - #clock-cells = <0>; - reg = <3>; - clocks = <&mck>; - }; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - udpck: udpck { - #clock-cells = <0>; - reg = <7>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - - pck2: pck2 { - #clock-cells = <0>; - reg = <10>; - clocks = <&prog2>; - }; - - iscck: iscck { - #clock-cells = <0>; - reg = <18>; - clocks = <&mck>; - }; - }; - - periph32ck { - compatible = "atmel,at91sam9x5-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&h32ck>; - - macb0_clk: macb0_clk { - #clock-cells = <0>; - reg = <5>; - atmel,clk-output-range = <0 83000000>; - }; - - tdes_clk: tdes_clk { - #clock-cells = <0>; - reg = <11>; - atmel,clk-output-range = <0 83000000>; - }; - - matrix1_clk: matrix1_clk { - #clock-cells = <0>; - reg = <14>; - }; - - hsmc_clk: hsmc_clk { - #clock-cells = <0>; - reg = <17>; - }; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <18>; - atmel,clk-output-range = <0 83000000>; - }; - - flx0_clk: flx0_clk { - #clock-cells = <0>; - reg = <19>; - atmel,clk-output-range = <0 83000000>; - }; - - flx1_clk: flx1_clk { - #clock-cells = <0>; - reg = <20>; - atmel,clk-output-range = <0 83000000>; - }; - - flx2_clk: flx2_clk { - #clock-cells = <0>; - reg = <21>; - atmel,clk-output-range = <0 83000000>; - }; - - flx3_clk: flx3_clk { - #clock-cells = <0>; - reg = <22>; - atmel,clk-output-range = <0 83000000>; - }; - - flx4_clk: flx4_clk { - #clock-cells = <0>; - reg = <23>; - atmel,clk-output-range = <0 83000000>; - }; - - uart0_clk: uart0_clk { - #clock-cells = <0>; - reg = <24>; - atmel,clk-output-range = <0 83000000>; - }; - - uart1_clk: uart1_clk { - #clock-cells = <0>; - reg = <25>; - atmel,clk-output-range = <0 83000000>; - }; - - uart2_clk: uart2_clk { - #clock-cells = <0>; - reg = <26>; - atmel,clk-output-range = <0 83000000>; - }; - - uart3_clk: uart3_clk { - #clock-cells = <0>; - reg = <27>; - atmel,clk-output-range = <0 83000000>; - }; - - uart4_clk: uart4_clk { - #clock-cells = <0>; - reg = <28>; - atmel,clk-output-range = <0 83000000>; - }; - - twi0_clk: twi0_clk { - reg = <29>; - #clock-cells = <0>; - atmel,clk-output-range = <0 83000000>; - }; - - twi1_clk: twi1_clk { - #clock-cells = <0>; - reg = <30>; - atmel,clk-output-range = <0 83000000>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <33>; - atmel,clk-output-range = <0 83000000>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <34>; - atmel,clk-output-range = <0 83000000>; - }; - - tcb0_clk: tcb0_clk { - #clock-cells = <0>; - reg = <35>; - atmel,clk-output-range = <0 83000000>; - }; - - tcb1_clk: tcb1_clk { - #clock-cells = <0>; - reg = <36>; - atmel,clk-output-range = <0 83000000>; - }; - - pwm_clk: pwm_clk { - #clock-cells = <0>; - reg = <38>; - atmel,clk-output-range = <0 83000000>; - }; - - adc_clk: adc_clk { - #clock-cells = <0>; - reg = <40>; - atmel,clk-output-range = <0 83000000>; - }; - - uhphs_clk: uhphs_clk { - #clock-cells = <0>; - reg = <41>; - atmel,clk-output-range = <0 83000000>; - }; - - udphs_clk: udphs_clk { - #clock-cells = <0>; - reg = <42>; - atmel,clk-output-range = <0 83000000>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <43>; - atmel,clk-output-range = <0 83000000>; - }; - - ssc1_clk: ssc1_clk { - #clock-cells = <0>; - reg = <44>; - atmel,clk-output-range = <0 83000000>; - }; - - trng_clk: trng_clk { - #clock-cells = <0>; - reg = <47>; - atmel,clk-output-range = <0 83000000>; - }; - - pdmic_clk: pdmic_clk { - #clock-cells = <0>; - reg = <48>; - atmel,clk-output-range = <0 83000000>; - }; - - securam_clk: securam_clk { - #clock-cells = <0>; - reg = <51>; - }; - - i2s0_clk: i2s0_clk { - #clock-cells = <0>; - reg = <54>; - atmel,clk-output-range = <0 83000000>; - }; - - i2s1_clk: i2s1_clk { - #clock-cells = <0>; - reg = <55>; - atmel,clk-output-range = <0 83000000>; - }; - - can0_clk: can0_clk { - #clock-cells = <0>; - reg = <56>; - atmel,clk-output-range = <0 83000000>; - }; - - can1_clk: can1_clk { - #clock-cells = <0>; - reg = <57>; - atmel,clk-output-range = <0 83000000>; - }; - - classd_clk: classd_clk { - #clock-cells = <0>; - reg = <59>; - atmel,clk-output-range = <0 83000000>; - }; - }; - - periph64ck { - compatible = "atmel,at91sam9x5-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - dma0_clk: dma0_clk { - #clock-cells = <0>; - reg = <6>; - }; - - dma1_clk: dma1_clk { - #clock-cells = <0>; - reg = <7>; - }; - - aes_clk: aes_clk { - #clock-cells = <0>; - reg = <9>; - }; - - aesb_clk: aesb_clk { - #clock-cells = <0>; - reg = <10>; - }; - - sha_clk: sha_clk { - #clock-cells = <0>; - reg = <12>; - }; - - mpddr_clk: mpddr_clk { - #clock-cells = <0>; - reg = <13>; - }; - - matrix0_clk: matrix0_clk { - #clock-cells = <0>; - reg = <15>; - }; - - sdmmc0_hclk: sdmmc0_hclk { - #clock-cells = <0>; - reg = <31>; - }; - - sdmmc1_hclk: sdmmc1_hclk { - #clock-cells = <0>; - reg = <32>; - }; - - lcdc_clk: lcdc_clk { - #clock-cells = <0>; - reg = <45>; - }; - - isc_clk: isc_clk { - #clock-cells = <0>; - reg = <46>; - }; - - qspi0_clk: qspi0_clk { - #clock-cells = <0>; - reg = <52>; - }; - - qspi1_clk: qspi1_clk { - #clock-cells = <0>; - reg = <53>; - }; - }; - - gck { - compatible = "atmel,sama5d2-clk-generated"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>; - - sdmmc0_gclk: sdmmc0_gclk { - #clock-cells = <0>; - reg = <31>; - }; - - sdmmc1_gclk: sdmmc1_gclk { - #clock-cells = <0>; - reg = <32>; - }; - - tcb0_gclk: tcb0_gclk { - #clock-cells = <0>; - reg = <35>; - atmel,clk-output-range = <0 83000000>; - }; - - tcb1_gclk: tcb1_gclk { - #clock-cells = <0>; - reg = <36>; - atmel,clk-output-range = <0 83000000>; - }; - - pwm_gclk: pwm_gclk { - #clock-cells = <0>; - reg = <38>; - atmel,clk-output-range = <0 83000000>; - }; - - isc_gclk: isc_gclk { - #clock-cells = <0>; - reg = <46>; - }; - - pdmic_gclk: pdmic_gclk { - #clock-cells = <0>; - reg = <48>; - }; - - i2s0_gclk: i2s0_gclk { - #clock-cells = <0>; - reg = <54>; - }; - - i2s1_gclk: i2s1_gclk { - #clock-cells = <0>; - reg = <55>; - }; - - can0_gclk: can0_gclk { - #clock-cells = <0>; - reg = <56>; - atmel,clk-output-range = <0 80000000>; - }; - - can1_gclk: can1_gclk { - #clock-cells = <0>; - reg = <57>; - atmel,clk-output-range = <0 80000000>; - }; - - classd_gclk: classd_gclk { - #clock-cells = <0>; - reg = <59>; - atmel,clk-output-range = <0 100000000>; - }; - }; - - i2s_clkmux { - compatible = "atmel,sama5d2-clk-i2s-mux"; - #address-cells = <1>; - #size-cells = <0>; - - i2s0muxck: i2s0_muxclk { - clocks = <&i2s0_clk>, <&i2s0_gclk>; - #clock-cells = <0>; - reg = <0>; - }; - - i2s1muxck: i2s1_muxclk { - clocks = <&i2s1_clk>, <&i2s1_gclk>; - #clock-cells = <0>; - reg = <1>; - }; - }; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; }; qspi0: spi@f0020000 { @@ -985,7 +435,7 @@ reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>; reg-names = "qspi_base", "qspi_mmap"; interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&qspi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 52>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -996,7 +446,7 @@ reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>; reg-names = "qspi_base", "qspi_mmap"; interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&qspi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 53>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1010,7 +460,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(30))>; dma-names = "tx"; - clocks = <&sha_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "sha_clk"; status = "okay"; }; @@ -1026,7 +476,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(27))>; dma-names = "tx", "rx"; - clocks = <&aes_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "aes_clk"; status = "okay"; }; @@ -1042,7 +492,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(7))>; dma-names = "tx", "rx"; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; clock-names = "spi_clk"; atmel,fifo-size = <16>; #address-cells = <1>; @@ -1061,7 +511,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(22))>; dma-names = "tx", "rx"; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; clock-names = "pclk"; status = "disabled"; }; @@ -1074,7 +524,7 @@ 67 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 2 */ #address-cells = <1>; #size-cells = <0>; - clocks = <&macb0_clk>, <&macb0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>; clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -1085,7 +535,7 @@ #size-cells = <0>; reg = <0xf800c000 0x100>; interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -1095,7 +545,7 @@ #size-cells = <0>; reg = <0xf8010000 0x100>; interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb1_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -1103,7 +553,7 @@ compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd"; reg = <0xf8014000 0x1000>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>; - clocks = <&hsmc_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1123,7 +573,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(50))>; dma-names = "rx"; - clocks = <&pdmic_clk>, <&pdmic_gclk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 48>, <&pmc PMC_TYPE_GCK 48>; clock-names = "pclk", "gclk"; status = "disabled"; }; @@ -1139,7 +589,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(36))>; dma-names = "tx", "rx"; - clocks = <&uart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; clock-names = "usart"; status = "disabled"; }; @@ -1155,7 +605,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(38))>; dma-names = "tx", "rx"; - clocks = <&uart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>; clock-names = "usart"; status = "disabled"; }; @@ -1171,7 +621,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>; dma-names = "tx", "rx"; - clocks = <&uart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>; clock-names = "usart"; status = "disabled"; }; @@ -1189,7 +639,7 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>; atmel,fifo-size = <16>; status = "disabled"; }; @@ -1199,7 +649,7 @@ reg = <0xf802c000 0x4000>; interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>; #pwm-cells = <3>; - clocks = <&pwm_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; }; sfr: sfr@f8030000 { @@ -1210,7 +660,7 @@ flx0: flexcom@f8034000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf8034000 0x200>; - clocks = <&flx0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf8034000 0x800>; @@ -1220,7 +670,7 @@ flx1: flexcom@f8038000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf8038000 0x200>; - clocks = <&flx1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf8038000 0x800>; @@ -1230,7 +680,7 @@ securam: sram@f8044000 { compatible = "atmel,sama5d2-securam", "mmio-sram"; reg = <0xf8044000 0x1420>; - clocks = <&securam_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 51>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xf8044000 0x1420>; @@ -1255,7 +705,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xf8048030 0x10>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&h32ck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>; }; watchdog@f8048040 { @@ -1292,10 +742,10 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(32))>; dma-names = "tx", "rx"; - clocks = <&i2s0_clk>, <&i2s0_gclk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_GCK 54>; clock-names = "pclk", "gclk"; - assigned-clocks = <&i2s0muxck>; - assigned-clock-parents = <&i2s0_gclk>; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S0_MUX>; + assigned-clock-parents = <&pmc PMC_TYPE_GCK 54>; status = "disabled"; }; @@ -1306,10 +756,10 @@ interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>, <64 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-names = "int0", "int1"; - clocks = <&can0_clk>, <&can0_gclk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 56>, <&pmc PMC_TYPE_GCK 56>; clock-names = "hclk", "cclk"; - assigned-clocks = <&can0_gclk>; - assigned-clock-parents = <&utmi>; + assigned-clocks = <&pmc PMC_TYPE_GCK 56>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; assigned-clock-rates = <40000000>; bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>; status = "disabled"; @@ -1326,7 +776,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(9))>; dma-names = "tx", "rx"; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; clock-names = "spi_clk"; atmel,fifo-size = <16>; #address-cells = <1>; @@ -1345,7 +795,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(42))>; dma-names = "tx", "rx"; - clocks = <&uart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>; clock-names = "usart"; status = "disabled"; }; @@ -1361,7 +811,7 @@ AT91_XDMAC_DT_PERID(44))>; dma-names = "tx", "rx"; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&uart4_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; clock-names = "usart"; status = "disabled"; }; @@ -1369,7 +819,7 @@ flx2: flexcom@fc010000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xfc010000 0x200>; - clocks = <&flx2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xfc010000 0x800>; @@ -1379,7 +829,7 @@ flx3: flexcom@fc014000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xfc014000 0x200>; - clocks = <&flx3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xfc014000 0x800>; @@ -1389,7 +839,7 @@ flx4: flexcom@fc018000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xfc018000 0x200>; - clocks = <&flx4_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xfc018000 0x800>; @@ -1400,7 +850,7 @@ compatible = "atmel,at91sam9g45-trng"; reg = <0xfc01c000 0x100>; interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&trng_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; }; aic: interrupt-controller@fc020000 { @@ -1424,7 +874,7 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; atmel,fifo-size = <16>; status = "disabled"; }; @@ -1433,7 +883,7 @@ compatible = "atmel,sama5d2-adc"; reg = <0xfc030000 0x100>; interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&adc_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; clock-names = "adc_clk"; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>; dma-names = "rx"; @@ -1466,7 +916,7 @@ #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; }; secumod@fc040000 { @@ -1485,7 +935,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(29))>; dma-names = "tx", "rx"; - clocks = <&tdes_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; clock-names = "tdes_clk"; status = "okay"; }; @@ -1498,7 +948,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(47))>; dma-names = "tx"; - clocks = <&classd_clk>, <&classd_gclk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>; clock-names = "pclk", "gclk"; status = "disabled"; }; @@ -1514,10 +964,10 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(34))>; dma-names = "tx", "rx"; - clocks = <&i2s1_clk>, <&i2s1_gclk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>; clock-names = "pclk", "gclk"; - assigned-clocks = <&i2s1muxck>; - assigned-parrents = <&i2s1_gclk>; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>; + assigned-parrents = <&pmc PMC_TYPE_GCK 55>; status = "disabled"; }; @@ -1528,10 +978,10 @@ interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>, <65 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-names = "int0", "int1"; - clocks = <&can1_clk>, <&can1_gclk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>; clock-names = "hclk", "cclk"; - assigned-clocks = <&can1_gclk>; - assigned-clock-parents = <&utmi>; + assigned-clocks = <&pmc PMC_TYPE_GCK 57>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; assigned-clock-rates = <40000000>; bosch,mram-cfg = <0x1100 0 0 64 0 0 32 32>; status = "disabled"; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 7371f2a0460f..2604fd07dd53 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -137,7 +137,7 @@ reg = <0x00400000 0x100000 0xfc02c000 0x4000>; interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udphs_clk>, <&utmi>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; @@ -264,7 +264,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -273,7 +273,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00600000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>; + clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 46>; clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; @@ -297,7 +297,7 @@ 0x1 0x0 0x60000000 0x10000000 0x2 0x0 0x70000000 0x10000000 0x3 0x0 0x80000000 0x8000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { @@ -327,7 +327,7 @@ compatible = "atmel,sama5d4-hlcdc"; reg = <0xf0000000 0x4000>; interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>; clock-names = "periph_clk","sys_clk", "slow_clk"; status = "disabled"; @@ -356,7 +356,7 @@ reg = <0xf0004000 0x200>; interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <1>; - clocks = <&dma1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 50>; clock-names = "dma_clk"; }; @@ -366,7 +366,7 @@ interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_isi_data_0_7>; - clocks = <&isi_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 52>; clock-names = "isi_clk"; status = "disabled"; port { @@ -378,7 +378,7 @@ ramc0: ramc@f0010000 { compatible = "atmel,sama5d3-ddramc"; reg = <0xf0010000 0x200>; - clocks = <&ddrck>, <&mpddr_clk>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "ddrck", "mpddr"; }; @@ -387,7 +387,7 @@ reg = <0xf0014000 0x200>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <1>; - clocks = <&dma0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "dma_clk"; }; @@ -395,448 +395,9 @@ compatible = "atmel,sama5d4-pmc", "syscon"; reg = <0xf0018000 0x120>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_rc_osc: main_rc_osc { - compatible = "atmel,at91sam9x5-clk-main-rc-osc"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MOSCRCS>; - clock-frequency = <12000000>; - clock-accuracy = <100000000>; - }; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91sam9x5-clk-main"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MOSCSELS>; - clocks = <&main_rc_osc &main_osc>; - }; - - plla: pllack { - compatible = "atmel,sama5d3-clk-pll"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <12000000 12000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>; - }; - - plladiv: plladivck { - compatible = "atmel,at91sam9x5-clk-plldiv"; - #clock-cells = <0>; - clocks = <&plla>; - }; - - utmi: utmick { - compatible = "atmel,at91sam9x5-clk-utmi"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_LOCKU>; - clocks = <&main>; - }; - - mck: masterck { - compatible = "atmel,at91sam9x5-clk-master"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; - atmel,clk-output-range = <125000000 200000000>; - atmel,clk-divisors = <1 2 4 3>; - }; - - h32ck: h32mxck { - #clock-cells = <0>; - compatible = "atmel,sama5d4-clk-h32mx"; - clocks = <&mck>; - }; - - usb: usbck { - compatible = "atmel,at91sam9x5-clk-usb"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - prog: progck { - compatible = "atmel,at91sam9x5-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - - prog2: prog2 { - #clock-cells = <0>; - reg = <2>; - interrupts = <AT91_PMC_PCKRDY(2)>; - }; - }; - - smd: smdclk { - compatible = "atmel,at91sam9x5-clk-smd"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - ddrck: ddrck { - #clock-cells = <0>; - reg = <2>; - clocks = <&mck>; - }; - - lcdck: lcdck { - #clock-cells = <0>; - reg = <3>; - clocks = <&mck>; - }; - - smdck: smdck { - #clock-cells = <0>; - reg = <4>; - clocks = <&smd>; - }; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - udpck: udpck { - #clock-cells = <0>; - reg = <7>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - - pck2: pck2 { - #clock-cells = <0>; - reg = <10>; - clocks = <&prog2>; - }; - }; - - periph32ck { - compatible = "atmel,at91sam9x5-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&h32ck>; - - pioD_clk: pioD_clk { - #clock-cells = <0>; - reg = <5>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <6>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <7>; - }; - - icm_clk: icm_clk { - #clock-cells = <0>; - reg = <9>; - }; - - aes_clk: aes_clk { - #clock-cells = <0>; - reg = <12>; - }; - - tdes_clk: tdes_clk { - #clock-cells = <0>; - reg = <14>; - }; - - sha_clk: sha_clk { - #clock-cells = <0>; - reg = <15>; - }; - - matrix1_clk: matrix1_clk { - #clock-cells = <0>; - reg = <17>; - }; - - hsmc_clk: hsmc_clk { - #clock-cells = <0>; - reg = <22>; - }; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <23>; - }; - - pioB_clk: pioB_clk { - #clock-cells = <0>; - reg = <24>; - }; - - pioC_clk: pioC_clk { - #clock-cells = <0>; - reg = <25>; - }; - - pioE_clk: pioE_clk { - #clock-cells = <0>; - reg = <26>; - }; - - uart0_clk: uart0_clk { - #clock-cells = <0>; - reg = <27>; - }; - - uart1_clk: uart1_clk { - #clock-cells = <0>; - reg = <28>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <29>; - }; - - usart3_clk: usart3_clk { - #clock-cells = <0>; - reg = <30>; - }; - - usart4_clk: usart4_clk { - #clock-cells = <0>; - reg = <31>; - }; - - twi0_clk: twi0_clk { - reg = <32>; - #clock-cells = <0>; - }; - - twi1_clk: twi1_clk { - #clock-cells = <0>; - reg = <33>; - }; - - twi2_clk: twi2_clk { - #clock-cells = <0>; - reg = <34>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <35>; - }; - - mci1_clk: mci1_clk { - #clock-cells = <0>; - reg = <36>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <37>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <38>; - }; - - spi2_clk: spi2_clk { - #clock-cells = <0>; - reg = <39>; - }; - - tcb0_clk: tcb0_clk { - #clock-cells = <0>; - reg = <40>; - }; - - tcb1_clk: tcb1_clk { - #clock-cells = <0>; - reg = <41>; - }; - - tcb2_clk: tcb2_clk { - #clock-cells = <0>; - reg = <42>; - }; - - pwm_clk: pwm_clk { - #clock-cells = <0>; - reg = <43>; - }; - - adc_clk: adc_clk { - #clock-cells = <0>; - reg = <44>; - }; - - dbgu_clk: dbgu_clk { - #clock-cells = <0>; - reg = <45>; - }; - - uhphs_clk: uhphs_clk { - #clock-cells = <0>; - reg = <46>; - }; - - udphs_clk: udphs_clk { - #clock-cells = <0>; - reg = <47>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <48>; - }; - - ssc1_clk: ssc1_clk { - #clock-cells = <0>; - reg = <49>; - }; - - trng_clk: trng_clk { - #clock-cells = <0>; - reg = <53>; - }; - - macb0_clk: macb0_clk { - #clock-cells = <0>; - reg = <54>; - }; - - macb1_clk: macb1_clk { - #clock-cells = <0>; - reg = <55>; - }; - - fuse_clk: fuse_clk { - #clock-cells = <0>; - reg = <57>; - }; - - securam_clk: securam_clk { - #clock-cells = <0>; - reg = <59>; - }; - - smd_clk: smd_clk { - #clock-cells = <0>; - reg = <61>; - }; - - twi3_clk: twi3_clk { - #clock-cells = <0>; - reg = <62>; - }; - - catb_clk: catb_clk { - #clock-cells = <0>; - reg = <63>; - }; - }; - - periph64ck { - compatible = "atmel,at91sam9x5-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - dma0_clk: dma0_clk { - #clock-cells = <0>; - reg = <8>; - }; - - cpkcc_clk: cpkcc_clk { - #clock-cells = <0>; - reg = <10>; - }; - - aesb_clk: aesb_clk { - #clock-cells = <0>; - reg = <13>; - }; - - mpddr_clk: mpddr_clk { - #clock-cells = <0>; - reg = <16>; - }; - - matrix0_clk: matrix0_clk { - #clock-cells = <0>; - reg = <18>; - }; - - vdec_clk: vdec_clk { - #clock-cells = <0>; - reg = <19>; - }; - - dma1_clk: dma1_clk { - #clock-cells = <0>; - reg = <50>; - }; - - lcdc_clk: lcdc_clk { - #clock-cells = <0>; - reg = <51>; - }; - - isi_clk: isi_clk { - #clock-cells = <0>; - reg = <52>; - }; - }; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; }; mmc0: mmc@f8000000 { @@ -852,7 +413,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>; clock-names = "mci_clk"; }; @@ -869,7 +430,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; - clocks = <&uart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>; clock-names = "usart"; status = "disabled"; }; @@ -887,7 +448,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(27))>; dma-names = "tx", "rx"; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 48>; clock-names = "pclk"; status = "disabled"; }; @@ -897,7 +458,7 @@ reg = <0xf800c000 0x300>; interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; - clocks = <&pwm_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; status = "disabled"; }; @@ -916,7 +477,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; clock-names = "spi_clk"; status = "disabled"; }; @@ -936,7 +497,7 @@ pinctrl-0 = <&pinctrl_i2c0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; status = "disabled"; }; @@ -955,7 +516,7 @@ pinctrl-0 = <&pinctrl_i2c1>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; status = "disabled"; }; @@ -965,7 +526,7 @@ #size-cells = <0>; reg = <0xf801c000 0x100>; interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -977,7 +538,7 @@ pinctrl-0 = <&pinctrl_macb0_rmii>; #address-cells = <1>; #size-cells = <0>; - clocks = <&macb0_clk>, <&macb0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_PERIPHERAL 54>; clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -997,7 +558,7 @@ pinctrl-0 = <&pinctrl_i2c2>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; status = "disabled"; }; @@ -1019,7 +580,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; status = "disabled"; }; @@ -1037,7 +598,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; @@ -1055,7 +616,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 36>; clock-names = "mci_clk"; }; @@ -1072,7 +633,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - clocks = <&uart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; clock-names = "usart"; status = "disabled"; }; @@ -1090,7 +651,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>; clock-names = "usart"; status = "disabled"; }; @@ -1108,7 +669,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; - clocks = <&usart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; clock-names = "usart"; status = "disabled"; }; @@ -1126,7 +687,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart4>; - clocks = <&usart4_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 31>; clock-names = "usart"; status = "disabled"; }; @@ -1144,7 +705,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(29))>; dma-names = "tx", "rx"; - clocks = <&ssc1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 49>; clock-names = "pclk"; status = "disabled"; }; @@ -1164,7 +725,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; clock-names = "spi_clk"; status = "disabled"; }; @@ -1184,7 +745,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - clocks = <&spi2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; clock-names = "spi_clk"; status = "disabled"; }; @@ -1195,7 +756,7 @@ #size-cells = <0>; reg = <0xfc020000 0x100>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb1_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -1205,7 +766,7 @@ #size-cells = <0>; reg = <0xfc024000 0x100>; interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb2_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -1217,7 +778,7 @@ pinctrl-0 = <&pinctrl_macb1_rmii>; #address-cells = <1>; #size-cells = <0>; - clocks = <&macb1_clk>, <&macb1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_PERIPHERAL 55>; clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -1226,14 +787,14 @@ compatible = "atmel,at91sam9g45-trng"; reg = <0xfc030000 0x100>; interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&trng_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 53>; }; adc0: adc@fc034000 { compatible = "atmel,at91sam9x5-adc"; reg = <0xfc034000 0x100>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&adc_clk>, + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>, <&adc_op_clk>; clock-names = "adc_clk", "adc_op_clk"; atmel,adc-channels-used = <0x01f>; @@ -1276,7 +837,7 @@ <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>; dma-names = "tx", "rx"; - clocks = <&aes_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "aes_clk"; status = "okay"; }; @@ -1290,7 +851,7 @@ <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(43))>; dma-names = "tx", "rx"; - clocks = <&tdes_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "tdes_clk"; status = "okay"; }; @@ -1302,7 +863,7 @@ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(44))>; dma-names = "tx"; - clocks = <&sha_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "sha_clk"; status = "okay"; }; @@ -1311,7 +872,7 @@ compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; reg = <0xfc05c000 0x1000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>; - clocks = <&hsmc_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1339,7 +900,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfc068630 0x10>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&h32ck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>; }; watchdog: watchdog@fc068640 { @@ -1370,7 +931,7 @@ interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&dbgu_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; clock-names = "usart"; status = "disabled"; }; @@ -1400,7 +961,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; }; pioB: gpio@fc06b000 { @@ -1411,7 +972,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; }; pioC: gpio@fc06c000 { @@ -1422,7 +983,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioC_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>; }; pioD: gpio@fc068000 { @@ -1433,7 +994,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioD_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; }; pioE: gpio@fc06d000 { @@ -1444,7 +1005,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioE_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>; }; /* pinctrl pin settings */ diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index e8f0a07c4564..33836990b102 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the SH73A0 SoC + * Device Tree Source for the SH-Mobile AG5 (R8A73A00/SH73A0) SoC * * Copyright (C) 2012 Renesas Solutions Corp. */ diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 2d300396f0ed..dcb8fba3d709 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2012 Altera <www.altera.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * Copyright (C) 2012 Altera <www.altera.com> */ #include <dt-bindings/reset/altr,rst-mgr.h> @@ -758,7 +746,6 @@ <0xffb80000 0x10000>; reg-names = "nand_data", "denali_reg"; interrupts = <0x0 0x90 0x4>; - dma-mask = <0xffffffff>; clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; clock-names = "nand", "nand_x", "ecc"; status = "disabled"; @@ -771,7 +758,7 @@ qspi: spi@ff705000 { compatible = "cdns,qspi-nor"; - #address-cells = <1>; + #address-cells = <1>; #size-cells = <0>; reg = <0xff705000 0x1000>, <0xffa00000 0x1000>; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 59ef13e37536..e41fa23481c3 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright Altera Corporation (C) 2014. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -664,7 +653,6 @@ <0xffb80000 0x10000>; reg-names = "nand_data", "denali_reg"; interrupts = <0 99 4>; - dma-mask = <0xffffffff>; clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; clock-names = "nand", "nand_x", "ecc"; status = "disabled"; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index 64cc86a98771..360dae5a5b12 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2015 Altera Corporation <www.altera.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "socfpga_arria10.dtsi" diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts index d14f9ccb6e10..e36e0a0f8aa6 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2015 Altera Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ /dts-v1/; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts index beb2fc6b9eb6..b4c0a76a4d1a 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2016 Intel. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ /dts-v1/; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts index 5822fd2085db..df2bab1624d4 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2014-2015 Altera Corporation <www.altera.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ /dts-v1/; diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi index e59461f5416e..22dbf07afcff 100644 --- a/arch/arm/boot/dts/socfpga_arria5.dtsi +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2013 Altera Corporation <www.altera.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. + * Copyright (C) 2013 Altera Corporation <www.altera.com> */ /dts-v1/; diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index aac4feea86f3..90e676e7019f 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2013 Altera Corporation <www.altera.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * Copyright (C) 2013 Altera Corporation <www.altera.com> */ #include "socfpga_arria5.dtsi" diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi index 68ced67f8bfb..319a71e41ea4 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2012 Altera Corporation <www.altera.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * Copyright (C) 2012 Altera Corporation <www.altera.com> */ /dts-v1/; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts index 31b01a998b2e..67076e1b1c7f 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright Altera Corporation (C) 2015. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ #include "socfpga_cyclone5.dtsi" diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi index 3c03da6b8b1d..bd92806ffc12 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2015 Marek Vasut <marex@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "socfpga_cyclone5.dtsi" diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts index c2eb88aab8b3..ceaec29770c6 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2015 Marek Vasut <marex@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "socfpga_cyclone5_mcv.dtsi" diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index 155829f9eba1..6f138b2b2616 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2012 Altera Corporation <www.altera.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * Copyright (C) 2012 Altera Corporation <www.altera.com> */ #include "socfpga_cyclone5.dtsi" diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index a4a555c19d94..c155ff02eb6e 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de> */ #include "socfpga_cyclone5.dtsi" diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts index 031c721441ff..8d5d3996f6f2 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de> */ #include "socfpga_cyclone5.dtsi" diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts index 8860dd2e242c..99a71757cdf4 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2016 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * Copyright (C) 2016 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> */ #include "socfpga_cyclone5.dtsi" @@ -123,9 +111,9 @@ }; &qspi { - status = "okay"; + status = "okay"; - flash0: n25q512a@0 { + flash0: n25q512a@0 { #address-cells = <1>; #size-cells = <1>; compatible = "n25q512a"; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index e61efe16e79c..355b3dbf438d 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) /* - * Copyright (C) 2015 Marek Vasut <marex@denx.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright (C) 2015 Marek Vasut <marex@denx.de> */ #include "socfpga_cyclone5.dtsi" diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts index 547c38632c68..a77846f73b34 100644 --- a/arch/arm/boot/dts/socfpga_vt.dts +++ b/arch/arm/boot/dts/socfpga_vt.dts @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2013 Altera Corporation <www.altera.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * Copyright (C) 2013 Altera Corporation <www.altera.com> */ /dts-v1/; diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index 221acd10f6c8..2f0d966f39ad 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -63,8 +63,6 @@ compatible = "gpio-keys-polled"; pinctrl-names = "default"; pinctrl-0 = <&key_pins_inet9f>; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <20>; left-joystick-left { diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index b97a0f2f20b9..d82a604f3d9c 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -76,8 +76,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; back { label = "Key Back"; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 3d62a8950720..5d46bb0139fa 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -530,8 +530,6 @@ }; hdmi_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts index 39504d720efc..64d50fcfcd3a 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts @@ -75,8 +75,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp152: pmic@30 { @@ -89,8 +87,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ @@ -106,13 +102,7 @@ }; &pio { - mmc0_cd_pin_t003: mmc0_cd_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_t003: led_pins@0 { + led_pins_t003: led-pin { pins = "PB2"; function = "gpio_out"; drive-strength = <20>; @@ -131,7 +121,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index 8d4fb9331212..c88f08984483 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -71,8 +71,6 @@ reg_vmmc1: vmmc1 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_vcc_en_pin_t004>; regulator-name = "vmmc1"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -86,8 +84,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp152: pmic@30 { @@ -100,8 +96,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ @@ -109,8 +103,6 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vmmc1>; bus-width = <4>; non-removable; @@ -127,24 +119,13 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PG12"; function = "gpio_in"; bias-pull-up; }; - mmc0_cd_pin_t004: mmc0_cd_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-up; - }; - - mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 { - pins = "PB18"; - function = "gpio_out"; - }; - - led_pins_t004: led_pins@0 { + led_pins_t004: led-pin { pins = "PB2"; function = "gpio_out"; drive-strength = <20>; @@ -158,7 +139,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts index dd7fd5c3d76f..6e90ccb267aa 100644 --- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts +++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts @@ -59,8 +59,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_mk802>; red { label = "mk802:red:usr"; @@ -74,8 +72,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp152: pmic@30 { @@ -88,8 +84,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ @@ -97,8 +91,6 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; non-removable; @@ -113,33 +105,14 @@ status = "okay"; }; -&pio { - led_pins_mk802: led_pins@0 { - pins = "PB2"; - function = "gpio_out"; - }; - - mmc0_cd_pin_mk802: mmc0_cd_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-up; - }; - - usb1_vbus_pin_mk802: usb1_vbus_pin@0 { - pins = "PB10"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_mk802>; gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 2c902ed2c87a..262c2ffbdcfa 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -97,7 +97,7 @@ &emac { pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_b>; + pinctrl-0 = <&emac_pa_pins>; phy = <&phy1>; status = "okay"; }; @@ -117,8 +117,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp152: pmic@30 { @@ -130,8 +128,6 @@ #include "axp152.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; at24@50 { @@ -143,8 +139,6 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -152,35 +146,35 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@191 { + button-191 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <191274>; }; - button@392 { + button-392 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <392644>; }; - button@601 { + button-601 { label = "Menu"; linux,code = <KEY_MENU>; channel = <0>; voltage = <601151>; }; - button@795 { + button-795 { label = "Enter"; linux,code = <KEY_ENTER>; channel = <0>; voltage = <795090>; }; - button@987 { + button-987 { label = "Home"; linux,code = <KEY_HOMEPAGE>; channel = <0>; @@ -197,8 +191,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ @@ -206,8 +198,6 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */ @@ -223,30 +213,13 @@ }; &pio { - mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-up; - }; - - mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { - pins = "PG13"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_olinuxino: led_pins@0 { + led_pins_olinuxino: led-pin { pins = "PE3"; function = "gpio_out"; drive-strength = <20>; }; - usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 { - pins = "PB10"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PG12"; function = "gpio_in"; bias-pull-up; @@ -259,15 +232,14 @@ }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>; gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; status = "okay"; }; &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_b>, - <&spi2_cs0_pins_b>; + pinctrl-0 = <&spi2_pb_pins>, + <&spi2_cs0_pb_pin>; status = "okay"; }; @@ -277,19 +249,19 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_b>; + pinctrl-0 = <&uart2_pc_pins>; status = "okay"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>; + pinctrl-0 = <&uart3_pg_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index 034853d1c08f..b2a49a216ebf 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -76,8 +76,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ @@ -85,8 +83,6 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; non-removable; @@ -98,33 +94,21 @@ }; &pio { - mmc0_cd_pin_r7: mmc0_cd_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_r7: led_pins@0 { + led_pins_r7: led-pin { pins = "PB2"; function = "gpio_out"; drive-strength = <20>; }; - - usb1_vbus_pin_r7: usb1_vbus_pin@0 { - pins = "PG13"; - function = "gpio_out"; - }; }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_r7>; gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts index 3f68ef5d92a0..b5ee8fb13a92 100644 --- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts @@ -61,8 +61,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_wobo_i5>; blue { label = "a10s-wobo-i5:blue:usr"; @@ -73,8 +71,6 @@ reg_emac_3v3: emac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&emac_power_pin_wobo>; regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -94,7 +90,7 @@ &emac { pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; + pinctrl-0 = <&emac_pd_pins>; phy = <&phy1>; status = "okay"; }; @@ -104,8 +100,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -126,8 +120,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 */ @@ -142,24 +134,6 @@ status = "okay"; }; -&pio { - led_pins_wobo_i5: led_pins@0 { - pins = "PB2"; - function = "gpio_out"; - }; - - mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 { - pins = "PB3"; - function = "gpio_in"; - bias-pull-up; - }; - - emac_power_pin_wobo: emac_power_pin@0 { - pins = "PA02"; - function = "gpio_out"; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -206,7 +180,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 316cb8b2945b..09c486b608b2 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -42,15 +42,11 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include "sun5i.dtsi" #include <dt-bindings/dma/sun4i-a10.h> / { - interrupt-parent = <&intc>; - aliases { ethernet0 = &emac; }; @@ -60,7 +56,7 @@ #size-cells = <1>; ranges; - framebuffer@2 { + framebuffer-lcd0-hdmi { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; @@ -76,7 +72,7 @@ allwinner,pipelines = <&fe0>; }; - soc@1c00000 { + soc { hdmi: hdmi@1c16000 { compatible = "allwinner,sun5i-a10s-hdmi"; reg = <0x01c16000 0x1000>; @@ -104,8 +100,6 @@ }; hdmi_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -125,20 +119,25 @@ compatible = "allwinner,sun5i-a10s-ccu"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; +}; + &pio { compatible = "allwinner,sun5i-a10s-pinctrl"; - uart0_pins_a: uart0@0 { + uart0_pb_pins: uart0-pb-pins { pins = "PB19", "PB20"; function = "uart0"; }; - uart2_pins_b: uart2@1 { + uart2_pc_pins: uart2-pc-pins { pins = "PC18", "PC19"; function = "uart2"; }; - emac_pins_b: emac0@1 { + emac_pa_pins: emac-pa-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", @@ -147,27 +146,24 @@ function = "emac"; }; - mmc1_pins_a: mmc1@0 { + mmc1_pins: mmc1-pins { pins = "PG3", "PG4", "PG5", "PG6", "PG7", "PG8"; function = "mmc1"; drive-strength = <30>; }; - spi2_pins_b: spi2@1 { + spi2_pb_pins: spi2-pb-pins { pins = "PB12", "PB13", "PB14"; function = "spi2"; }; - spi2_cs0_pins_b: spi2_cs0@1 { + spi2_cs0_pb_pin: spi2-cs0-pb-pin { pins = "PB11"; function = "spi2"; }; }; -&sram_a { -}; - &tcon0_out { tcon0_out_hdmi: endpoint@2 { reg = <2>; diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts index 378214d8316e..f3cede9beb63 100644 --- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts +++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts @@ -78,8 +78,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -91,8 +89,6 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; pcf8563: rtc@51 { @@ -105,14 +101,14 @@ vref-supply = <®_ldo2>; status = "okay"; - button@200 { + button-200 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <200000>; }; - button@400 { + button-400 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; @@ -121,8 +117,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ @@ -134,19 +128,13 @@ }; &pio { - mmc0_cd_pin_d709: mmc0_cd_pin@0 { - pins = "PG0"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PG1"; function = "gpio_in"; bias-pull-down; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PG2"; function = "gpio_in"; bias-pull-up; @@ -155,7 +143,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; @@ -197,7 +185,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index 7ee0c3f6d7a1..9369f7453beb 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -69,8 +69,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -80,8 +78,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; pcf8563: rtc@51 { @@ -91,8 +87,6 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -100,14 +94,14 @@ vref-supply = <®_ldo2>; status = "okay"; - button@200 { + button-200 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <200000>; }; - button@400 { + button-400 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; @@ -116,8 +110,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ @@ -133,22 +125,11 @@ }; &pio { - mmc0_cd_pin_h702: mmc0_cd_pin@0 { - pins = "PG0"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PG2"; function = "gpio_in"; bias-pull-up; }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - pins = "PG1"; - function = "gpio_in"; - }; }; #include "axp209.dtsi" @@ -191,7 +172,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; @@ -202,7 +183,7 @@ &usbphy { pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + pinctrl-0 = <&usb0_id_detect_pin>; usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts index bc883893f4a4..ca8f3fd1ddfe 100644 --- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts +++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts @@ -94,8 +94,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -109,14 +107,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "disabled"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "disabled"; }; @@ -124,7 +118,7 @@ vref-supply = <®_ldo2>; status = "okay"; - button@984 { + button-984 { label = "Home"; linux,code = <KEY_HOMEPAGE>; channel = <0>; @@ -133,8 +127,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; broken-cd; @@ -143,7 +135,7 @@ &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_a>; + pinctrl-0 = <&mmc2_4bit_pc_pins>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; broken-cd; @@ -204,7 +196,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index aa4b34fd9126..943868e495bc 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -77,26 +77,18 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ @@ -112,56 +104,38 @@ }; &pio { - mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { - pins = "PG0"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_olinuxinom: led_pins@0 { + led_pins_olinuxinom: led-pin { pins = "PG9"; function = "gpio_out"; drive-strength = <20>; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PG2"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PG1"; function = "gpio_in"; bias-pull-down; }; - - usb0_vbus_pin_olinuxinom: usb0_vbus_pin@0 { - pins = "PG12"; - function = "gpio_out"; - }; - - usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { - pins = "PG11"; - function = "gpio_out"; - }; }; ®_usb0_vbus { - pinctrl-0 = <&usb0_vbus_pin_olinuxinom>; gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; status = "okay"; }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxinom>; gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 437ad913a373..9409c232d48a 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -123,8 +123,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -138,14 +136,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -153,35 +147,35 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@191 { + button-191 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <191274>; }; - button@392 { + button-392 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <392644>; }; - button@601 { + button-601 { label = "Menu"; linux,code = <KEY_MENU>; channel = <0>; voltage = <601151>; }; - button@795 { + button-795 { label = "Enter"; linux,code = <KEY_ENTER>; channel = <0>; voltage = <795090>; }; - button@987 { + button-987 { label = "Home"; linux,code = <KEY_HOMEPAGE>; channel = <0>; @@ -190,8 +184,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ @@ -207,34 +199,23 @@ }; &pio { - mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { - pins = "PG0"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_olinuxino: led_pins@0 { + led_pins_olinuxino: led-pin { pins = "PG9"; function = "gpio_out"; drive-strength = <20>; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PG2"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PG1"; function = "gpio_in"; bias-pull-down; }; - - usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { - pins = "PG11"; - function = "gpio_out"; - }; }; ®_usb0_vbus { @@ -243,7 +224,6 @@ }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxino>; gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -263,7 +243,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts index bfdd38d6bfcc..732873cbeedc 100644 --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -58,7 +58,7 @@ /delete-property/stdout-path; }; - i2c_lcd: i2c@0 { + i2c_lcd: i2c-gpio { /* The lcd panel i2c interface is hooked up via gpios */ compatible = "i2c-gpio"; pinctrl-names = "default"; @@ -79,13 +79,9 @@ allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */ }; -&codec_pa_pin { - pins = "PG3"; -}; - &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; + pinctrl-0 = <&mmc2_8bit_pins>; vmmc-supply = <®_vcc3v3>; bus-width = <8>; non-removable; @@ -99,7 +95,7 @@ }; &pio { - i2c_lcd_pins: i2c_lcd_pin@0 { + i2c_lcd_pins: i2c-lcd-pin { pins = "PG10", "PG12"; function = "gpio_out"; bias-pull-up; @@ -128,7 +124,3 @@ /* The P66 uses the uart pins as gpios */ status = "disabled"; }; - -&usb0_vbus_pin_a { - pins = "PB4"; -}; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index b1d827765530..ae04955fd9a3 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -42,15 +42,11 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include "sun5i.dtsi" #include <dt-bindings/thermal/thermal.h> / { - interrupt-parent = <&intc>; - thermal-zones { cpu_thermal { /* milliseconds */ @@ -88,7 +84,7 @@ allwinner,pipelines = <&fe0>; }; - soc@1c00000 { + soc { pwm: pwm@1c20e00 { compatible = "allwinner,sun5i-a13-pwm"; reg = <0x01c20e00 0xc>; diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts index c55b11a4d3c7..3f70b8c53132 100644 --- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts +++ b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts @@ -79,8 +79,6 @@ mmc0_pwrseq: mmc0_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_reg_on_pin_chip_pro>; reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */ }; }; @@ -94,8 +92,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -114,20 +110,16 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "disabled"; }; &i2s0 { pinctrl-names = "default"; - pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>; + pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>; status = "disabled"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc0_pwrseq>; bus-width = <4>; @@ -137,7 +129,7 @@ &nfc { pinctrl-names = "default"; - pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; + pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>; status = "okay"; nand@0 { @@ -157,21 +149,9 @@ status = "okay"; }; -&pio { - usb0_id_pin_chip_pro: usb0-id-pin@0 { - pins = "PG2"; - function = "gpio_in"; - }; - - wifi_reg_on_pin_chip_pro: wifi-reg-on-pin@0 { - pins = "PB10"; - function = "gpio_out"; - }; -}; - &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>, <&pwm1_pins>; + pinctrl-0 = <&pwm0_pin>, <&pwm1_pins>; status = "disabled"; }; @@ -220,19 +200,19 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>, <&uart1_cts_rts_pins_a>; + pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>; status = "okay"; }; &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>, <&uart2_cts_rts_pins_a>; + pinctrl-0 = <&uart2_pd_pins>, <&uart2_cts_rts_pd_pins>; status = "disabled"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>, <&uart3_cts_rts_pins_a>; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>; status = "okay"; }; @@ -253,8 +233,6 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_pin_chip_pro>; usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ usb0_vbus_power-supply = <&usb_power_supply>; usb1_vbus-supply = <®_vcc5v0>; diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts index 5f0adc0f7bb4..86e46aa59134 100644 --- a/arch/arm/boot/dts/sun5i-gr8-evb.dts +++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts @@ -123,8 +123,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -143,8 +141,6 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; wm8978: codec@1a { @@ -160,20 +156,18 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &i2s0 { pinctrl-names = "default"; - pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>; + pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; @@ -181,49 +175,49 @@ vref-supply = <®_ldo2>; status = "okay"; - button@190 { + button-190 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <190000>; }; - button@390 { + button-390 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <390000>; }; - button@600 { + button-600 { label = "Menu"; linux,code = <KEY_MENU>; channel = <0>; voltage = <600000>; }; - button@800 { + button-800 { label = "Search"; linux,code = <KEY_SEARCH>; channel = <0>; voltage = <800000>; }; - button@980 { + button-980 { label = "Home"; linux,code = <KEY_HOMEPAGE>; channel = <0>; voltage = <980000>; }; - button@1180 { + button-1180 { label = "Esc"; linux,code = <KEY_ESC>; channel = <0>; voltage = <1180000>; }; - button@1400 { + button-1400 { label = "Enter"; linux,code = <KEY_ENTER>; channel = <0>; @@ -232,8 +226,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gr8_evb>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ @@ -242,7 +234,7 @@ &nfc { pinctrl-names = "default"; - pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; + pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>; /* MLC Support sucks for now */ status = "disabled"; @@ -256,31 +248,9 @@ status = "okay"; }; -&pio { - mmc0_cd_pin_gr8_evb: mmc0-cd-pin@0 { - pins = "PG0"; - function = "gpio_in"; - }; - - usb0_id_pin_gr8_evb: usb0-id-pin@0 { - pins = "PG2"; - function = "gpio_in"; - }; - - usb0_vbus_det_pin_gr8_evb: usb0-vbus-det-pin@0 { - pins = "PG1"; - function = "gpio_in"; - }; - - usb1_vbus_pin_gr8_evb: usb1-vbus-pin@0 { - pins = "PG13"; - function = "gpio_out"; - }; -}; - &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; @@ -310,7 +280,6 @@ }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_gr8_evb>; gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -321,7 +290,7 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; @@ -331,7 +300,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>, <&uart1_cts_rts_pins_a>; + pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>; status = "okay"; }; @@ -356,8 +325,6 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_pin_gr8_evb>, <&usb0_vbus_det_pin_gr8_evb>; usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ usb0_vbus_power-supply = <&usb_power_supply>; diff --git a/arch/arm/boot/dts/sun5i-gr8.dtsi b/arch/arm/boot/dts/sun5i-gr8.dtsi index ef0b7446a99d..98a8fd5e89e8 100644 --- a/arch/arm/boot/dts/sun5i-gr8.dtsi +++ b/arch/arm/boot/dts/sun5i-gr8.dtsi @@ -54,7 +54,7 @@ allwinner,pipelines = <&fe0>; }; - soc@1c00000 { + soc { pwm: pwm@1c20e00 { compatible = "allwinner,sun5i-a10s-pwm"; reg = <0x01c20e00 0xc>; @@ -98,28 +98,28 @@ &pio { compatible = "nextthing,gr8-pinctrl"; - i2s0_data_pins_a: i2s0-data@0 { + i2s0_data_pins: i2s0-data-pins { pins = "PB6", "PB7", "PB8", "PB9"; function = "i2s0"; }; - i2s0_mclk_pins_a: i2s0-mclk@0 { + i2s0_mclk_pin: i2s0-mclk-pin { pins = "PB5"; function = "i2s0"; }; - pwm1_pins: pwm1 { + pwm1_pins: pwm1-pin { pins = "PG13"; function = "pwm1"; }; - spdif_tx_pins_a: spdif@0 { + spdif_tx_pin: spdif-tx-pin { pins = "PB10"; function = "spdif"; bias-pull-up; }; - uart1_cts_rts_pins_a: uart1-cts-rts@0 { + uart1_cts_rts_pins: uart1-cts-rts-pins { pins = "PG5", "PG6"; function = "uart1"; }; diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index 879a4b0f3bd5..f4298facf9dc 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -79,8 +79,6 @@ mmc0_pwrseq: mmc0_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&chip_wifi_reg_on_pin>; reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */ }; @@ -109,8 +107,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -137,14 +133,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "disabled"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; xio: gpio@38 { @@ -161,13 +153,11 @@ }; }; -&mmc0_pins_a { +&mmc0_pins { bias-pull-up; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc0_pwrseq>; bus-width = <4>; @@ -184,22 +174,7 @@ }; &pio { - chip_vbus_pin: chip_vbus_pin@0 { - pins = "PB10"; - function = "gpio_out"; - }; - - chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 { - pins = "PC19"; - function = "gpio_out"; - }; - - chip_id_det_pin: chip_id_det_pin@0 { - pins = "PG2"; - function = "gpio_in"; - }; - - chip_w1_pin: chip_w1_pin@0 { + chip_w1_pin: chip-w1-pin { pins = "PD2"; function = "gpio_in"; bias-pull-up; @@ -260,7 +235,6 @@ }; ®_usb0_vbus { - pinctrl-0 = <&chip_vbus_pin>; vin-supply = <®_vcc5v0>; gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ status = "okay"; @@ -268,7 +242,7 @@ &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; + pinctrl-0 = <&spi2_pe_pins>; status = "disabled"; }; @@ -282,14 +256,14 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>, - <&uart3_cts_rts_pins_a>; + pinctrl-0 = <&uart3_pg_pins>, + <&uart3_cts_rts_pg_pins>; status = "okay"; }; @@ -303,8 +277,6 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&chip_id_det_pin>; status = "okay"; usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi index d2a2eb8b3f26..6202aabedbfe 100644 --- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi @@ -63,8 +63,6 @@ }; &codec { - pinctrl-names = "default"; - pinctrl-0 = <&codec_pa_pin>; allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */ status = "okay"; }; @@ -96,8 +94,6 @@ reg = <0x40>; interrupt-parent = <&pio>; interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_power_pin>; power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ /* Tablet dts must provide reg and compatible */ status = "disabled"; @@ -125,7 +121,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ @@ -137,40 +133,17 @@ }; &pio { - codec_pa_pin: codec_pa_pin@0 { - pins = "PG10"; - function = "gpio_out"; - }; - - mmc0_cd_pin: mmc0_cd_pin@0 { - pins = "PG0"; - function = "gpio_in"; - bias-pull-up; - }; - - ts_power_pin: ts_power_pin { - pins = "PB3"; - function = "gpio_out"; - drive-strength = <10>; - bias-disable; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PG1"; function = "gpio_in"; bias-pull-down; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PG2"; function = "gpio_in"; bias-pull-up; }; - - usb0_vbus_pin_a: usb0_vbus_pin@0 { - pins = "PG12"; - function = "gpio_out"; - }; }; ®_dcdc2 { @@ -211,7 +184,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 9cd65c46720b..5497d985c54a 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -42,14 +42,14 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include <dt-bindings/clock/sun5i-ccu.h> #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/reset/sun5i-ccu.h> / { interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; cpus { #address-cells = <1>; @@ -68,7 +68,7 @@ #size-cells = <1>; ranges; - framebuffer@0 { + framebuffer-lcd0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; @@ -77,7 +77,7 @@ status = "disabled"; }; - framebuffer@1 { + framebuffer-lcd0-tve0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; @@ -93,14 +93,14 @@ #size-cells = <1>; ranges; - osc24M: clk@1c20050 { + osc24M: clk-24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; - osc32k: clk@0 { + osc32k: clk-32k { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; @@ -114,7 +114,7 @@ ranges; /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ - cma_pool: cma@4a000000 { + default-pool { compatible = "shared-dma-pool"; size = <0x6000000>; alloc-ranges = <0x4a000000 0x6000000>; @@ -123,7 +123,7 @@ }; }; - soc@1c00000 { + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -326,6 +326,8 @@ clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>; clock-names = "ahb", "mmc"; interrupts = <32>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -446,7 +448,7 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - emac_pins_a: emac0@0 { + emac_pd_pins: emac-pd-pins { pins = "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD18", "PD19", "PD20", @@ -455,27 +457,27 @@ function = "emac"; }; - i2c0_pins_a: i2c0@0 { + i2c0_pins: i2c0-pins { pins = "PB0", "PB1"; function = "i2c0"; }; - i2c1_pins_a: i2c1@0 { + i2c1_pins: i2c1-pins { pins = "PB15", "PB16"; function = "i2c1"; }; - i2c2_pins_a: i2c2@0 { + i2c2_pins: i2c2-pins { pins = "PB17", "PB18"; function = "i2c2"; }; - ir0_rx_pins_a: ir0@0 { + ir0_rx_pin: ir0-rx-pin { pins = "PB4"; function = "ir0"; }; - lcd_rgb565_pins: lcd_rgb565@0 { + lcd_rgb565_pins: lcd-rgb565-pins { pins = "PD3", "PD4", "PD5", "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD19", "PD20", "PD21", "PD22", "PD23", @@ -483,7 +485,7 @@ function = "lcd0"; }; - lcd_rgb666_pins: lcd_rgb666@0 { + lcd_rgb666_pins: lcd-rgb666-pins { pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", @@ -491,7 +493,7 @@ function = "lcd0"; }; - mmc0_pins_a: mmc0@0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -499,7 +501,7 @@ bias-pull-up; }; - mmc2_pins_a: mmc2@0 { + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15"; @@ -508,7 +510,7 @@ bias-pull-up; }; - mmc2_4bit_pins_a: mmc2-4bit@0 { + mmc2_4bit_pc_pins: mmc2-4bit-pc-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; function = "mmc2"; @@ -516,7 +518,7 @@ bias-pull-up; }; - nand_pins_a: nand-base0@0 { + nand_pins: nand-pins { pins = "PC0", "PC1", "PC2", "PC5", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", @@ -524,57 +526,57 @@ function = "nand0"; }; - nand_cs0_pins_a: nand-cs@0 { + nand_cs0_pin: nand-cs0-pin { pins = "PC4"; function = "nand0"; }; - nand_rb0_pins_a: nand-rb@0 { + nand_rb0_pin: nand-rb0-pin { pins = "PC6"; function = "nand0"; }; - spi2_pins_a: spi2@0 { + spi2_pe_pins: spi2-pe-pins { pins = "PE1", "PE2", "PE3"; function = "spi2"; }; - spi2_cs0_pins_a: spi2-cs0@0 { + spi2_cs0_pe_pin: spi2-cs0-pe-pin { pins = "PE0"; function = "spi2"; }; - uart1_pins_a: uart1@0 { + uart1_pe_pins: uart1-pe-pins { pins = "PE10", "PE11"; function = "uart1"; }; - uart1_pins_b: uart1@1 { + uart1_pg_pins: uart1-pg-pins { pins = "PG3", "PG4"; function = "uart1"; }; - uart2_pins_a: uart2@0 { + uart2_pd_pins: uart2-pd-pins { pins = "PD2", "PD3"; function = "uart2"; }; - uart2_cts_rts_pins_a: uart2-cts-rts@0 { + uart2_cts_rts_pd_pins: uart2-cts-rts-pd-pins { pins = "PD4", "PD5"; function = "uart2"; }; - uart3_pins_a: uart3@0 { + uart3_pg_pins: uart3-pg-pins { pins = "PG9", "PG10"; function = "uart3"; }; - uart3_cts_rts_pins_a: uart3-cts-rts@0 { + uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins { pins = "PG11", "PG12"; function = "uart3"; }; - pwm0_pins: pwm0 { + pwm0_pin: pwm0-pin { pins = "PB2"; function = "pwm"; }; @@ -678,6 +680,8 @@ reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&ccu CLK_APB1_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -688,6 +692,8 @@ reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&ccu CLK_APB1_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -698,6 +704,8 @@ reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&ccu CLK_APB1_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts index 7f34323a668c..32d22025ac99 100644 --- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -65,22 +65,14 @@ status = "okay"; }; -&pio { - usb1_vbus_pin_a: usb1_vbus_pin@0 { - pins = "PH27"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_a>; gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 939c497a6f70..0b7bedf85fb9 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -60,7 +60,7 @@ stdout-path = "serial0:115200n8"; }; - i2c_lcd: i2c@0 { + i2c_lcd: i2c { /* The lcd panel i2c interface is hooked up via gpios */ compatible = "i2c-gpio"; pinctrl-names = "default"; @@ -77,7 +77,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -88,20 +88,14 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "fail"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; mma8452: mma8452@1d { @@ -113,31 +107,14 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; -&mmc0_pins_a { - bias-pull-up; -}; - &pio { - mmc0_cd_pin_colombus: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; - - usb2_vbus_pin_colombus: usb2_vbus_pin@0 { - pins = "PH24"; - function = "gpio_out"; - }; - - i2c_lcd_pins: i2c_lcd_pin@0 { + i2c_lcd_pins: i2c-lcd-pins { pins = "PA23", "PA24"; function = "gpio_out"; bias-pull-up; @@ -145,15 +122,13 @@ }; ®_usb2_vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_pin_colombus>; gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index ce4f9e9834bf..e17a65b3561e 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -160,7 +160,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; @@ -184,21 +184,15 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; /* pull-ups and devices require AXP221 DLDO3 */ status = "failed"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; pcf8563: rtc@51 { @@ -209,27 +203,18 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; -&mmc0_pins_a { - /* external pull-ups missing for some pins */ - bias-pull-up; -}; - &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>; vmmc-supply = <®_aldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -241,24 +226,6 @@ status = "okay"; }; -&pio { - gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 { - pins = "PA21"; - function = "gpio_out"; - }; - - mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; - - wifi_reset_pin_hummingbird: wifi_reset_pin@0 { - pins = "PG10"; - function = "gpio_out"; - }; -}; - &p2wi { status = "okay"; @@ -354,7 +321,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts index d659be9dbc50..0832ac5ae3ec 100644 --- a/arch/arm/boot/dts/sun6i-a31-i7.dts +++ b/arch/arm/boot/dts/sun6i-a31-i7.dts @@ -71,8 +71,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_i7>; blue { label = "i7:blue:usr"; @@ -118,7 +116,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -140,47 +138,25 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ status = "okay"; }; -&pio { - led_pins_i7: led_pins@0 { - pins = "PH13"; - function = "gpio_out"; - }; - - mmc0_cd_pin_i7: mmc0_cd_pin@0 { - pins = "PH22"; - function = "gpio_in"; - bias-pull-up; - }; - - usb1_vbus_pin_i7: usb1_vbus_pin@0 { - pins = "PC27"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_i7>; gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; spdif-out = "okay"; status = "okay"; }; @@ -191,7 +167,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 9698f6d38d03..6eafb6361a26 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -60,8 +60,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_m9>; blue { label = "m9:blue:pwr"; @@ -85,7 +83,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; phy-supply = <®_dldo1>; @@ -98,13 +96,11 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ @@ -124,24 +120,6 @@ #include "axp22x.dtsi" -&pio { - led_pins_m9: led_pins@0 { - pins = "PH13"; - function = "gpio_out"; - }; - - mmc0_cd_pin_m9: mmc0_cd_pin@0 { - pins = "PH22"; - function = "gpio_in"; - bias-pull-up; - }; - - usb1_vbus_pin_m9: usb1_vbus_pin@0 { - pins = "PC27"; - function = "gpio_out"; - }; -}; - ®_aldo1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -215,15 +193,13 @@ }; ®_usb1_vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_m9>; gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts index bb14b171b160..ca036f97923a 100644 --- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts @@ -60,8 +60,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_m9>; blue { label = "a1000g:blue:pwr"; @@ -85,7 +83,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; phy-supply = <®_dldo1>; @@ -98,13 +96,11 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ @@ -124,24 +120,6 @@ #include "axp22x.dtsi" -&pio { - led_pins_m9: led_pins@0 { - pins = "PH13"; - function = "gpio_out"; - }; - - mmc0_cd_pin_m9: mmc0_cd_pin@0 { - pins = "PH22"; - function = "gpio_in"; - bias-pull-up; - }; - - usb1_vbus_pin_m9: usb1_vbus_pin@0 { - pins = "PC27"; - function = "gpio_out"; - }; -}; - ®_aldo1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -215,15 +193,13 @@ }; ®_usb1_vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_m9>; gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index debc0bf22ea3..353d90f99b40 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -42,8 +42,6 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> @@ -52,6 +50,8 @@ / { interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; aliases { ethernet0 = &gmac; @@ -62,7 +62,7 @@ #size-cells = <1>; ranges; - simplefb_hdmi: framebuffer@0 { + simplefb_hdmi: framebuffer-lcd0-hdmi { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; @@ -73,7 +73,7 @@ status = "disabled"; }; - simplefb_lcd: framebuffer@1 { + simplefb_lcd: framebuffer-lcd0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; @@ -115,7 +115,7 @@ #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; @@ -131,7 +131,7 @@ #cooling-cells = <2>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; @@ -147,7 +147,7 @@ #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; @@ -174,7 +174,10 @@ cooling-maps { map0 { trip = <&cpu_alert0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; @@ -196,12 +199,8 @@ }; }; - memory { - reg = <0x40000000 0x80000000>; - }; - pmu { - compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; + compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, @@ -213,13 +212,13 @@ #size-cells = <1>; ranges; - osc24M: osc24M { + osc24M: clk-24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; - osc32k: clk@0 { + osc32k: clk-32k { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; @@ -235,14 +234,14 @@ * The actual TX clock rate is not controlled by the * gmac_tx clock. */ - mii_phy_tx_clk: clk@1 { + mii_phy_tx_clk: clk-mii-phy-tx { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <25000000>; clock-output-names = "mii_phy_tx"; }; - gmac_int_tx_clk: clk@2 { + gmac_int_tx_clk: clk-gmac-int-tx { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -264,7 +263,7 @@ status = "disabled"; }; - soc@1c00000 { + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -389,6 +388,8 @@ resets = <&ccu RST_AHB1_MMC0>; reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -408,6 +409,8 @@ resets = <&ccu RST_AHB1_MMC1>; reset-names = "ahb"; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -607,7 +610,7 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - gmac_pins_gmii_a: gmac_gmii@0 { + gmac_gmii_pins: gmac-gmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", @@ -623,7 +626,7 @@ drive-strength = <30>; }; - gmac_pins_mii_a: gmac_mii@0 { + gmac_mii_pins: gmac-mii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA8", "PA9", "PA11", "PA12", "PA13", "PA14", "PA19", @@ -632,7 +635,7 @@ function = "gmac"; }; - gmac_pins_rgmii_a: gmac_rgmii@0 { + gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA19", @@ -645,22 +648,22 @@ drive-strength = <40>; }; - i2c0_pins_a: i2c0@0 { + i2c0_pins: i2c0-pins { pins = "PH14", "PH15"; function = "i2c0"; }; - i2c1_pins_a: i2c1@0 { + i2c1_pins: i2c1-pins { pins = "PH16", "PH17"; function = "i2c1"; }; - i2c2_pins_a: i2c2@0 { + i2c2_pins: i2c2-pins { pins = "PH18", "PH19"; function = "i2c2"; }; - lcd0_rgb888_pins: lcd0_rgb888 { + lcd0_rgb888_pins: lcd0-rgb888-pins { pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", @@ -671,7 +674,7 @@ function = "lcd0"; }; - mmc0_pins_a: mmc0@0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -679,7 +682,7 @@ bias-pull-up; }; - mmc1_pins_a: mmc1@0 { + mmc1_pins: mmc1-pins { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -687,7 +690,7 @@ bias-pull-up; }; - mmc2_pins_a: mmc2@0 { + mmc2_4bit_pins: mmc2-4bit-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; function = "mmc2"; @@ -695,7 +698,7 @@ bias-pull-up; }; - mmc2_8bit_emmc_pins: mmc2@1 { + mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", @@ -705,7 +708,7 @@ bias-pull-up; }; - mmc3_8bit_emmc_pins: mmc3@1 { + mmc3_8bit_emmc_pins: mmc3-8bit-emmc-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", @@ -715,12 +718,12 @@ bias-pull-up; }; - spdif_pins_a: spdif@0 { + spdif_tx_pin: spdif-tx-pin { pins = "PH28"; function = "spdif"; }; - uart0_pins_a: uart0@0 { + uart0_ph_pins: uart0-ph-pins { pins = "PH20", "PH21"; function = "uart0"; }; @@ -879,6 +882,8 @@ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB2_I2C0>; resets = <&ccu RST_APB2_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -890,6 +895,8 @@ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB2_I2C1>; resets = <&ccu RST_APB2_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -901,6 +908,8 @@ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB2_I2C2>; resets = <&ccu RST_APB2_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1373,12 +1382,12 @@ #size-cells = <0>; #gpio-cells = <3>; - ir_pins_a: ir@0 { + s_ir_rx_pin: s-ir-rx-pin { pins = "PL4"; function = "s_ir"; }; - p2wi_pins: p2wi { + s_p2wi_pins: s-p2wi-pins { pins = "PL0", "PL1"; function = "s_p2wi"; }; @@ -1392,7 +1401,7 @@ clock-frequency = <100000>; resets = <&apb0_rst 3>; pinctrl-names = "default"; - pinctrl-0 = <&p2wi_pins>; + pinctrl-0 = <&s_p2wi_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts index 882a4d89fa22..a2ef7846e2c8 100644 --- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts +++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts @@ -53,7 +53,7 @@ vref-supply = <®_aldo3>; status = "okay"; - button@1000 { + button-1000 { label = "Home"; linux,code = <KEY_HOMEPAGE>; channel = <0>; diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts index 75e578159c3a..72a02c045a38 100644 --- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts +++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts @@ -66,7 +66,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -77,7 +77,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; @@ -87,7 +87,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts b/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts index e584e6b186a7..c5e2c55cdc63 100644 --- a/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts +++ b/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts @@ -54,8 +54,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; ft5406ee8: touchscreen@38 { @@ -73,21 +71,21 @@ vref-supply = <®_aldo3>; status = "okay"; - button@200 { + button-200 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <200000>; }; - button@900 { + button-900 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <900000>; }; - button@1200 { + button-1200 { label = "Back"; linux,code = <KEY_BACK>; channel = <0>; diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 4cb9664cdb29..60b355f7184c 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -90,19 +90,13 @@ &i2c0 { /* pull-ups and device VDDIO use AXP221 DLDO3 */ - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "failed"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; ctp@5d { - pinctrl-names = "default"; - pinctrl-0 = <>911_int_primo81>; compatible = "goodix,gt911"; reg = <0x5d>; interrupt-parent = <&pio>; @@ -112,8 +106,6 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; accelerometer@1c { @@ -131,14 +123,14 @@ vref-supply = <®_aldo3>; status = "okay"; - button@158 { + button-158 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <158730>; }; - button@349 { + button-349 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; @@ -147,8 +139,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ @@ -156,22 +146,11 @@ }; &pio { - gt911_int_primo81: gt911_int_pin@0 { - pins = "PA3"; - function = "gpio_in"; - }; - - mma8452_int_primo81: mma8452_int_pin@0 { + mma8452_int_primo81: mma8452-int-pin { pins = "PA9"; function = "gpio_in"; bias-pull-up; }; - - mmc0_cd_pin_primo81: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; }; &p2wi { diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi index d7325bc4eeb4..3099491de8c4 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi @@ -135,7 +135,7 @@ /* UART0 pads available on core board */ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts index da0ccf5a2c44..4865c3271ab0 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts @@ -66,8 +66,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pin_sina31s>; status { label = "sina31s:status:usr"; @@ -116,7 +114,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; phy-supply = <®_dldo1>; @@ -139,7 +137,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; @@ -147,14 +145,14 @@ vref-supply = <®_aldo3>; status = "okay"; - button@158 { + button-158 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <158730>; }; - button@349 { + button-349 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; @@ -163,8 +161,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ @@ -175,19 +171,6 @@ status = "okay"; }; -&pio { - led_pin_sina31s: led_pin@0 { - pins = "PH13"; - function = "gpio_out"; - }; - - mmc0_cd_pin_sina31s: mmc0_cd_pin@0 { - pins = "PA4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dldo1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -196,7 +179,7 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index b8b79c0e9ee0..8e724c52feff 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -58,8 +58,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_bpi_m2>; blue { label = "bpi-m2:blue:usr"; @@ -79,8 +77,6 @@ mmc2_pwrseq: mmc2_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pwrseq_pin_bpi_m2>; reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */ }; }; @@ -95,7 +91,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_dldo1>; @@ -111,26 +107,20 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ status = "okay"; }; -&mmc0_pins_a { - bias-pull-up; -}; - &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; + pinctrl-0 = <&mmc2_4bit_pins>; vmmc-supply = <®_aldo1>; mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; @@ -146,10 +136,6 @@ }; }; -&mmc2_pins_a { - bias-pull-up; -}; - &ohci0 { status = "okay"; }; @@ -167,31 +153,6 @@ }; }; -&pio { - gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 { - pins = "PA21"; - function = "gpio_out"; - }; - - led_pins_bpi_m2: led_pins@0 { - pins = "PG5", "PG10", "PG11"; - function = "gpio_out"; - }; - - mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 { - pins = "PA4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - -&r_pio { - mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 { - pins = "PL8"; - function = "gpio_out"; - }; -}; - #include "axp22x.dtsi" ®_aldo1 { @@ -291,7 +252,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index aab6c1720ef7..2504e7189c54 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -62,14 +62,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -89,27 +85,13 @@ status = "okay"; }; -&pio { - mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; -&mmc0_pins_a { - bias-pull-up; -}; - &p2wi { status = "okay"; @@ -189,7 +171,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi index 4e72e4f3ef96..86143de21c22 100644 --- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi @@ -66,7 +66,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ @@ -74,13 +74,7 @@ }; &pio { - mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PA15"; function = "gpio_in"; bias-pull-up; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index 763cb03033c4..e2bfe0058830 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -73,8 +73,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_bpi_m1p>; green { label = "bananapi-m1-plus:green:usr"; @@ -90,15 +88,11 @@ mmc3_pwrseq: mmc3_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pwrseq_pin_bpi_m1p>; reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */ }; reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_bpi_m1p>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -134,7 +128,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; @@ -156,8 +150,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -175,13 +167,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m1p>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -191,8 +181,6 @@ &mmc3 { #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; @@ -209,11 +197,6 @@ }; }; -&mmc3_pins_a { - /* AP6210 requires pull-up */ - bias-pull-up; -}; - &ohci0 { status = "okay"; }; @@ -226,29 +209,6 @@ status = "okay"; }; -&pio { - gmac_power_pin_bpi_m1p: gmac_power_pin@0 { - pins = "PH23"; - function = "gpio_out"; - }; - - led_pins_bpi_m1p: led_pins@0 { - pins = "PH24", "PH25"; - function = "gpio_out"; - }; - - mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 { - pins = "PH10"; - function = "gpio_in"; - bias-pull-up; - }; - - mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 { - pins = "PH22"; - function = "gpio_out"; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -280,7 +240,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 70dfc4ac0bb5..556b1b591c5d 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -76,8 +76,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_bananapi>; green { label = "bananapi:green:usr"; @@ -87,8 +85,6 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_bananapi>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -134,7 +130,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; @@ -156,8 +152,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -168,20 +162,16 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -252,27 +242,11 @@ "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "", "", "", "", "", "", "", "", ""; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - - mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { - pins = "PH10"; - function = "gpio_in"; - bias-pull-up; - }; - - gmac_power_pin_bananapi: gmac_power_pin@0 { - pins = "PH23"; - function = "gpio_out"; - }; - - led_pins_bananapi: led_pins@0 { - pins = "PH24"; - function = "gpio_out"; - }; }; #include "axp209.dtsi" @@ -316,27 +290,27 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>, - <&spi0_cs1_pins_a>; + pinctrl-0 = <&spi0_pi_pins>, + <&spi0_cs0_pi_pin>, + <&spi0_cs1_pi_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_b>; + pinctrl-0 = <&uart3_ph_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index 0898eb6162f5..0176e9de0180 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -62,8 +62,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_bananapro>; blue { label = "bananapro:blue:usr"; @@ -78,15 +76,11 @@ wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&vmmc3_pin_bananapro>; reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; }; reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_bananapro>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -114,7 +108,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; @@ -126,8 +120,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -142,20 +134,16 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -163,8 +151,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -188,74 +174,39 @@ status = "okay"; }; -&pio { - gmac_power_pin_bananapro: gmac_power_pin@0 { - pins = "PH23"; - function = "gpio_out"; - }; - - led_pins_bananapro: led_pins@0 { - pins = "PH24", "PG2"; - function = "gpio_out"; - }; - - mmc0_cd_pin_bananapro: mmc0_cd_pin@0 { - pins = "PH10"; - function = "gpio_in"; - bias-pull-up; - }; - - usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - pins = "PH0"; - function = "gpio_out"; - }; - - usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - pins = "PH1"; - function = "gpio_out"; - }; - - vmmc3_pin_bananapro: vmmc3_pin@0 { - pins = "PH22"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_bananapro>; gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */ status = "okay"; }; ®_usb2_vbus { - pinctrl-0 = <&usb2_vbus_pin_bananapro>; gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ status = "okay"; }; &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>, - <&spi0_cs1_pins_a>; + pinctrl-0 = <&spi0_pi_pins>, + <&spi0_cs0_pi_pin>, + <&spi0_cs1_pi_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart4 { pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_b>; + pinctrl-0 = <&uart4_ph_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 942ac9dfd4a5..200685b0b1cb 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_cubieboard2>; blue { label = "cubieboard2:blue:usr"; @@ -116,7 +114,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -137,8 +135,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -149,20 +145,16 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -182,12 +174,7 @@ }; &pio { - led_pins_cubieboard2: led_pins@0 { - pins = "PH20", "PH21"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; @@ -239,7 +226,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 5649161de1d7..99f531b8d2a7 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_cubietruck>; blue { label = "cubietruck:blue:usr"; @@ -100,9 +98,9 @@ mmc3_pwrseq: mmc3_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>; reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ + clocks = <&ccu CLK_OUT_A>; + clock-names = "ext_clock"; }; sound { @@ -151,7 +149,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -172,8 +170,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -185,25 +181,20 @@ &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -211,8 +202,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; @@ -228,11 +217,6 @@ }; }; -&mmc3_pins_a { - /* AP6210 requires pull-up */ - bias-pull-up; -}; - &ohci0 { status = "okay"; }; @@ -246,45 +230,18 @@ }; &pio { - ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { - pins = "PH12"; - function = "gpio_out"; - }; - - led_pins_cubietruck: led_pins@0 { - pins = "PH7", "PH11", "PH20", "PH21"; - function = "gpio_out"; - }; - - mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 { - pins = "PH9"; - function = "gpio_out"; - }; - - usb0_vbus_pin_a: usb0_vbus_pin@0 { - pins = "PH17"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PH19"; - function = "gpio_in"; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - pins = "PH22"; - function = "gpio_in"; - }; + /* Pin outputs low power clock for WiFi and BT */ + pinctrl-0 = <&clk_out_a_pin>; + pinctrl-names = "default"; }; &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; + pinctrl-0 = <&pwm0_pin>, <&pwm1_pin>; status = "okay"; }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_cubietruck>; gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -325,7 +282,6 @@ }; ®_usb0_vbus { - pinctrl-0 = <&usb0_vbus_pin_a>; gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -340,14 +296,31 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm20702a1"; + clocks = <&ccu CLK_OUT_A>; + clock-names = "lpo"; + device-wakeup-gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */ + host-wakeup-gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */ + shutdown-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */ + max-speed = <1500000>; + }; }; &usb_otg { @@ -360,8 +333,6 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ usb0_vbus_power-supply = <&usb_power_supply>; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index 1f0e5ecbf0c4..fd0153f65685 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -67,8 +67,6 @@ reg_mmc3_vdd: mmc3_vdd { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_vdd_pin_a20_hummingbird>; regulator-name = "mmc3_vdd"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; @@ -78,8 +76,6 @@ reg_gmac_vdd: gmac_vdd { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_vdd_pin_a20_hummingbird>; regulator-name = "gmac_vdd"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; @@ -103,7 +99,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_vdd>; @@ -120,8 +116,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -135,32 +129,24 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -168,8 +154,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_mmc3_vdd>; bus-width = <4>; non-removable; @@ -184,42 +168,18 @@ status = "okay"; }; -&pio { - ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { - pins = "PH15"; - function = "gpio_out"; - }; - - usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { - pins = "PH2"; - function = "gpio_out"; - }; - - mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { - pins = "PH9"; - function = "gpio_out"; - }; - - gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { - pins = "PH16"; - function = "gpio_out"; - }; -}; - &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>; gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ status = "okay"; }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>; gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ status = "okay"; }; @@ -230,38 +190,38 @@ &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_b>, - <&spi2_cs0_pins_b>; + pinctrl-0 = <&spi2_pb_pins>, + <&spi2_cs0_pb_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; + pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>; status = "okay"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>; status = "okay"; }; &uart4 { pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; + pinctrl-0 = <&uart4_pg_pins>; status = "okay"; }; &uart5 { pinctrl-names = "default"; - pinctrl-0 = <&uart5_pins_a>; + pinctrl-0 = <&uart5_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 2e3f2f29d124..5f1c4f573d3e 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -61,8 +61,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_i12_tvbox>; red { label = "i12_tvbox:red:usr"; @@ -77,8 +75,6 @@ reg_vmmc3: vmmc3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&vmmc3_pin_i12_tvbox>; regulator-name = "vmmc3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -88,8 +84,6 @@ reg_vmmc3_io: vmmc3-io { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>; regulator-name = "vmmc3-io"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -101,8 +95,6 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_i12_tvbox>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -122,7 +114,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; phy-supply = <®_gmac_3v3>; @@ -134,8 +126,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -151,13 +141,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -165,8 +153,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vmmc3>; bus-width = <4>; non-removable; @@ -181,11 +167,6 @@ }; }; -&mmc3_pins_a { - /* AP6210 / AP6330 requires pull-up */ - bias-pull-up; -}; - &ohci0 { status = "okay"; }; @@ -194,28 +175,6 @@ status = "okay"; }; -&pio { - vmmc3_pin_i12_tvbox: vmmc3_pin@0 { - pins = "PH2"; - function = "gpio_out"; - }; - - vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { - pins = "PH12"; - function = "gpio_out"; - }; - - gmac_power_pin_i12_tvbox: gmac_power_pin@0 { - pins = "PH21"; - function = "gpio_out"; - }; - - led_pins_i12_tvbox: led_pins@0 { - pins = "PH9", "PH20"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { status = "okay"; }; @@ -226,7 +185,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts index 926fa194eb1b..949494730aee 100644 --- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts +++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts @@ -74,7 +74,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -85,8 +85,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -97,14 +95,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 8 5 GPIO_ACTIVE_LOW>; /* PI5 */ @@ -156,7 +150,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts index 1b05ba466e7d..b90a7607d069 100644 --- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts +++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts @@ -96,7 +96,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -115,13 +115,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -129,7 +127,7 @@ }; &pio { - led_pins_itead_core: led_pins@0 { + led_pins_itead_core: led-pins { pins = "PH20","PH21"; function = "gpio_out"; drive-strength = <20>; @@ -142,6 +140,6 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index b1ab7c1c33e3..f91e1bee44e8 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_lamobo_r1>; green { label = "lamobo_r1:green:usr"; @@ -85,8 +83,6 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_lamobo_r1>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -123,10 +119,12 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; status = "okay"; + /delete-property/#address-cells; + /delete-property/#size-cells; fixed-link { speed = <1000>; @@ -141,8 +139,6 @@ switch: ethernet-switch@1e { compatible = "brcm,bcm53125"; reg = <30>; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; @@ -199,8 +195,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -211,20 +205,16 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -240,27 +230,11 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - - mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 { - pins = "PH10"; - function = "gpio_in"; - bias-pull-up; - }; - - gmac_power_pin_lamobo_r1: gmac_power_pin@0 { - pins = "PH23"; - function = "gpio_out"; - }; - - led_pins_lamobo_r1: led_pins@0 { - pins = "PH24"; - function = "gpio_out"; - }; }; #include "axp209.dtsi" @@ -314,27 +288,27 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>, - <&spi0_cs1_pins_a>; + pinctrl-0 = <&spi0_pi_pins>, + <&spi0_cs0_pi_pin>, + <&spi0_cs1_pi_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_b>; + pinctrl-0 = <&uart3_ph_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index e91a209850bc..b8a1aaaf3976 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -63,8 +63,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_m3>; blue { label = "m3:blue:usr"; @@ -83,7 +81,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -94,8 +92,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -111,13 +107,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -125,8 +119,6 @@ }; &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; non-removable; @@ -141,13 +133,6 @@ status = "okay"; }; -&pio { - led_pins_m3: led_pins@0 { - pins = "PH20"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { status = "okay"; }; @@ -158,7 +143,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts index 6109f794a9c1..1491c603f661 100644 --- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts +++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts @@ -106,8 +106,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -121,20 +119,14 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -153,18 +145,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PH4"; - function = "gpio_in"; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - pins = "PH5"; - function = "gpio_in"; - }; -}; - ®_usb0_vbus { status = "okay"; }; @@ -179,13 +159,13 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; + pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>; status = "okay"; }; @@ -195,8 +175,6 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts index 81ebc97b76ee..20bf09b2226c 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts @@ -21,8 +21,6 @@ }; &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index f080f82b58ef..f0e6a96e5785 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olimex_som_evb>; green { label = "a20-olimex-som-evb:green:usr"; @@ -112,7 +110,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -133,8 +131,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -145,14 +141,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -160,49 +152,49 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@190 { + button-190 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <190000>; }; - button@390 { + button-390 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <390000>; }; - button@600 { + button-600 { label = "Menu"; linux,code = <KEY_MENU>; channel = <0>; voltage = <600000>; }; - button@800 { + button-800 { label = "Search"; linux,code = <KEY_SEARCH>; channel = <0>; voltage = <800000>; }; - button@980 { + button-980 { label = "Home"; linux,code = <KEY_HOMEPAGE>; channel = <0>; voltage = <980000>; }; - button@1180 { + button-1180 { label = "Esc"; linux,code = <KEY_ESC>; channel = <0>; voltage = <1180000>; }; - button@1400 { + button-1400 { label = "Enter"; linux,code = <KEY_ENTER>; channel = <0>; @@ -211,8 +203,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -220,8 +210,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olimex_som_evb>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 0 GPIO_ACTIVE_LOW>; /* PH0 */ @@ -241,36 +229,14 @@ }; &pio { - ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 { - pins = "PC3"; - function = "gpio_out"; - }; - - led_pins_olimex_som_evb: led_pins@0 { + led_pins_olimex_som_evb: led-pins { pins = "PH2"; function = "gpio_out"; drive-strength = <20>; }; - - mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 { - pins = "PH0"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PH4"; - function = "gpio_in"; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - pins = "PH5"; - function = "gpio_in"; - }; }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_olimex_som_evb>; gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -316,33 +282,33 @@ &spi1 { pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>, - <&spi1_cs0_pins_a>; + pinctrl-0 = <&spi1_pi_pins>, + <&spi1_cs0_pi_pin>; status = "okay"; }; &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>, - <&spi2_cs0_pins_a>; + pinctrl-0 = <&spi2_pc_pins>, + <&spi2_cs0_pc_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart6 { pinctrl-names = "default"; - pinctrl-0 = <&uart6_pins_a>; + pinctrl-0 = <&uart6_pi_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; @@ -352,8 +318,6 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */ usb0_vbus-supply = <®_usb0_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts index c56620a8fb20..a59755a2e7a9 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts @@ -20,8 +20,6 @@ }; &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts index 3d7b5c848fef..823aabce0462 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts @@ -78,7 +78,7 @@ &can0 { pinctrl-names = "default"; - pinctrl-0 = <&can0_pins_a>; + pinctrl-0 = <&can_ph_pins>; status = "okay"; }; @@ -104,7 +104,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy3>; phy-mode = "rgmii"; phy-supply = <®_vcc3v3>; @@ -130,8 +130,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -143,8 +141,6 @@ /* Exposed to UEXT1 */ &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; eeprom: eeprom@50 { @@ -156,20 +152,16 @@ /* Exposed to UEXT2 */ &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; @@ -177,8 +169,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&rtl_pwrseq>; bus-width = <4>; @@ -203,8 +193,8 @@ }; &pio { - bt_uart_pins: bt_uart_pins@0 { - pins = "PG6", "PG7", "PG8"; + uart3_rts_pin: uart3-rts-pin { + pins = "PG8"; function = "uart3"; }; }; @@ -274,43 +264,43 @@ /* Exposed to UEXT1 */ &spi1 { pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>, - <&spi1_cs0_pins_a>; + pinctrl-0 = <&spi1_pi_pins>, + <&spi1_cs0_pi_pin>; status = "okay"; }; /* Exposed to UEXT2 */ &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>, - <&spi2_cs0_pins_a>; + pinctrl-0 = <&spi2_pc_pins>, + <&spi2_cs0_pc_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; /* Used for RTL8723BS bluetooth */ &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&bt_uart_pins>; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_pin>; status = "okay"; }; /* Exposed to UEXT1 */ &uart4 { pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; + pinctrl-0 = <&uart4_pg_pins>; status = "okay"; }; /* Exposed to UEXT2 */ &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index d20fd03596e9..5e411194bf62 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -105,7 +105,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -126,8 +126,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -142,8 +140,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; eeprom: eeprom@50 { @@ -154,8 +150,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -175,24 +169,19 @@ }; &pio { - ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - pins = "PC3"; - function = "gpio_out"; - }; - - led_pins_olinuxinolime: led_pins@0 { + led_pins_olinuxinolime: led-pins { pins = "PH2"; function = "gpio_out"; drive-strength = <20>; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -200,7 +189,6 @@ }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -219,7 +207,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts index 81f376f2a44d..decb014a382b 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts @@ -48,23 +48,12 @@ compatible = "olimex,a20-olinuxino-lime2-emmc", "allwinner,sun7i-a20"; mmc2_pwrseq: pwrseq { - pinctrl-0 = <&mmc2_pins_nrst>; - pinctrl-names = "default"; compatible = "mmc-pwrseq-emmc"; reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>; }; }; -&pio { - mmc2_pins_nrst: mmc2-rst-pin { - pins = "PC16"; - function = "gpio_out"; - }; -}; - &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; vmmc-supply = <®_vcc3v3>; vqmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index ffafe9720b35..4e1c590eb098 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -110,7 +110,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -131,8 +131,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -143,8 +141,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; eeprom: eeprom@50 { @@ -154,9 +150,11 @@ }; }; +&lradc { + vref-supply = <®_vcc3v0>; +}; + &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -176,37 +174,26 @@ }; &pio { - ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - pins = "PC3"; - function = "gpio_out"; - }; - - led_pins_olinuxinolime: led_pins@0 { + led_pins_olinuxinolime: led-pins { pins = "PH2"; function = "gpio_out"; drive-strength = <20>; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; }; - - usb0_vbus_pin_lime2: usb0_vbus_pin@0 { - pins = "PC17"; - function = "gpio_out"; - }; }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -256,7 +243,6 @@ }; ®_usb0_vbus { - pinctrl-0 = <&usb0_vbus_pin_lime2>; gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -271,7 +257,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts index d99e7b193efe..2337b44a88aa 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts @@ -54,8 +54,6 @@ }; &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; non-removable; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 866d230593be..840ae1194a66 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -117,7 +117,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>, <&gmac_txerr>; + pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -138,8 +138,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -150,8 +148,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; eeprom: eeprom@50 { @@ -162,8 +158,6 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -171,49 +165,49 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@191 { + button-191 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <191274>; }; - button@392 { + button-392 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <392644>; }; - button@601 { + button-601 { label = "Menu"; linux,code = <KEY_MENU>; channel = <0>; voltage = <601151>; }; - button@795 { + button-795 { label = "Search"; linux,code = <KEY_SEARCH>; channel = <0>; voltage = <795090>; }; - button@987 { + button-987 { label = "Home"; linux,code = <KEY_HOMEPAGE>; channel = <0>; voltage = <987387>; }; - button@1184 { + button-1184 { label = "Esc"; linux,code = <KEY_ESC>; channel = <0>; voltage = <1184678>; }; - button@1398 { + button-1398 { label = "Enter"; linux,code = <KEY_ENTER>; channel = <0>; @@ -222,8 +216,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -231,8 +223,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */ @@ -252,30 +242,24 @@ }; &pio { - gmac_txerr: gmac_txerr@0 { + gmac_txerr: gmac-txerr-pin { pins = "PA17"; function = "gmac"; }; - mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { - pins = "PH11"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_olinuxino: led_pins@0 { + led_pins_olinuxino: led-pins { pins = "PH2"; function = "gpio_out"; drive-strength = <20>; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -331,33 +315,33 @@ &spi1 { pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>, - <&spi1_cs0_pins_a>; + pinctrl-0 = <&spi1_pi_pins>, + <&spi1_cs0_pi_pin>; status = "okay"; }; &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>, - <&spi2_cs0_pins_a>; + pinctrl-0 = <&spi2_pc_pins>, + <&spi2_cs0_pc_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart6 { pinctrl-names = "default"; - pinctrl-0 = <&uart6_pins_a>; + pinctrl-0 = <&uart6_pi_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index f5c7178eb063..15881081cac4 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_orangepi>; green { label = "orangepi:green:usr"; @@ -90,8 +88,6 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_orangepi>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -123,7 +119,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; @@ -145,8 +141,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -160,13 +154,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -174,8 +166,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */ @@ -187,43 +177,11 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - - mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { - pins = "PH10"; - function = "gpio_in"; - bias-pull-up; - }; - - mmc3_cd_pin_orangepi: mmc3_cd_pin@0 { - pins = "PH11"; - function = "gpio_in"; - bias-pull-up; - }; - - usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - pins = "PH22"; - function = "gpio_out"; - }; - - gmac_power_pin_orangepi: gmac_power_pin@0 { - pins = "PH23"; - function = "gpio_out"; - }; - - led_pins_orangepi: led_pins@0 { - pins = "PH24", "PH25"; - function = "gpio_out"; - }; - - usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - pins = "PH26"; - function = "gpio_out"; - }; }; ®_dcdc2 { @@ -256,20 +214,18 @@ }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_bananapro>; gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ status = "okay"; }; ®_usb2_vbus { - pinctrl-0 = <&usb2_vbus_pin_bananapro>; gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts index 7a4244e57589..d64de2e73a9f 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -63,8 +63,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_orangepi>; green { label = "orangepi:green:usr"; @@ -74,8 +72,6 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_orangepi>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -99,7 +95,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; @@ -111,8 +107,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -126,13 +120,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -144,37 +136,11 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - - mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { - pins = "PH10"; - function = "gpio_in"; - bias-pull-up; - }; - - usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - pins = "PH22"; - function = "gpio_out"; - }; - - gmac_power_pin_orangepi: gmac_power_pin@0 { - pins = "PH23"; - function = "gpio_out"; - }; - - led_pins_orangepi: led_pins@0 { - pins = "PH24"; - function = "gpio_out"; - }; - - usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - pins = "PH26"; - function = "gpio_out"; - }; }; ®_dcdc2 { @@ -207,20 +173,18 @@ }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_bananapro>; gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ status = "okay"; }; ®_usb2_vbus { - pinctrl-0 = <&usb2_vbus_pin_bananapro>; gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index bfca960b03e0..538ea15fa32f 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -71,8 +71,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_pcduino3_nano>; /* Marked "LED3" on the PCB. */ usr1 { @@ -115,7 +113,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -136,8 +134,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -149,13 +145,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -175,30 +169,14 @@ }; &pio { - ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 { - pins = "PH2"; - function = "gpio_out"; - }; - - led_pins_pcduino3_nano: led_pins@0 { - pins = "PH16", "PH15"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - - usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 { - pins = "PD2"; - function = "gpio_out"; - }; }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_pcduino3_nano>; gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ status = "okay"; }; @@ -232,14 +210,13 @@ /* A single regulator (U24) powers both USB host ports. */ ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>; gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */ status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index c576f101fbde..a72ed4318d04 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -63,8 +63,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_pcduino3>; tx { label = "pcduino3:green:tx"; @@ -77,23 +75,22 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&key_pins_pcduino3>; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + + back { label = "Key Back"; linux,code = <KEY_BACK>; gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; }; - button@1 { + + home { label = "Key Home"; linux,code = <KEY_HOME>; gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; }; - button@2 { + + menu { label = "Key Menu"; linux,code = <KEY_MENU>; gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; @@ -124,7 +121,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -135,8 +132,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -150,13 +145,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -176,17 +169,7 @@ }; &pio { - led_pins_pcduino3: led_pins@0 { - pins = "PH15", "PH16"; - function = "gpio_out"; - }; - - key_pins_pcduino3: key_pins@0 { - pins = "PH17", "PH18", "PH19"; - function = "gpio_in"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; @@ -233,7 +216,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index 8202c87ca6a3..ffade253d129 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -63,8 +63,6 @@ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_enable_pin>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ }; @@ -74,8 +72,6 @@ }; &codec { - pinctrl-names = "default"; - pinctrl-0 = <&codec_pa_pin>; allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ status = "okay"; }; @@ -93,8 +89,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -107,14 +101,10 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; gt911: touchscreen@5d { @@ -122,8 +112,6 @@ reg = <0x5d>; interrupt-parent = <&pio>; interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_reset_pin>; irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */ reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */ touchscreen-swapped-x-y; @@ -134,14 +122,14 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@571 { + button-571 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <571428>; }; - button@761 { + button-761 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; @@ -150,8 +138,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -171,22 +157,7 @@ }; &pio { - bl_enable_pin: bl_enable_pin@0 { - pins = "PH7"; - function = "gpio_out"; - }; - - codec_pa_pin: codec_pa_pin@0 { - pins = "PH15"; - function = "gpio_out"; - }; - - ts_reset_pin: ts_reset_pin@0 { - pins = "PB13"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; @@ -195,7 +166,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; @@ -238,7 +209,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts index ff5c1086585c..c27e56091fb1 100644 --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -62,8 +62,6 @@ mmc3_pwrseq: mmc3_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>; reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ }; }; @@ -82,7 +80,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -93,8 +91,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -105,22 +101,16 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; #include "axp209.dtsi" &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -128,8 +118,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; @@ -158,12 +146,7 @@ }; &pio { - vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 { - pins = "PH9"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; @@ -209,7 +192,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 02e40da9f028..641a8fa6d428 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -42,8 +42,6 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/dma/sun4i-a10.h> @@ -52,6 +50,8 @@ / { interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; aliases { ethernet0 = &gmac; @@ -62,7 +62,7 @@ #size-cells = <1>; ranges; - framebuffer@0 { + framebuffer-lcd0-hdmi { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; @@ -73,7 +73,7 @@ status = "disabled"; }; - framebuffer@1 { + framebuffer-lcd0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; @@ -83,7 +83,7 @@ status = "disabled"; }; - framebuffer@2 { + framebuffer-lcd0-tve0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; @@ -118,7 +118,7 @@ #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; @@ -148,7 +148,8 @@ cooling-maps { map0 { trip = <&cpu_alert0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; @@ -170,17 +171,13 @@ }; }; - memory { - reg = <0x40000000 0x80000000>; - }; - reserved-memory { #address-cells = <1>; #size-cells = <1>; ranges; /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ - cma_pool: cma@4a000000 { + default-pool { compatible = "shared-dma-pool"; size = <0x6000000>; alloc-ranges = <0x4a000000 0x6000000>; @@ -198,7 +195,7 @@ }; pmu { - compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; + compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; }; @@ -208,14 +205,14 @@ #size-cells = <1>; ranges; - osc24M: clk@1c20050 { + osc24M: clk-24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; - osc32k: clk@0 { + osc32k: clk-32k { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; @@ -231,14 +228,14 @@ * The actual TX clock rate is not controlled by the * gmac_tx clock. */ - mii_phy_tx_clk: clk@1 { + mii_phy_tx_clk: clk-mii-phy-tx { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <25000000>; clock-output-names = "mii_phy_tx"; }; - gmac_int_tx_clk: clk@2 { + gmac_int_tx_clk: clk-gmac-int-tx { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -261,7 +258,7 @@ status = "disabled"; }; - soc@1c00000 { + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -517,6 +514,8 @@ "output", "sample"; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -551,6 +550,8 @@ "output", "sample"; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -568,6 +569,8 @@ "output", "sample"; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -665,8 +668,6 @@ }; hdmi_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -750,22 +751,22 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - can0_pins_a: can0@0 { + can_ph_pins: can-ph-pins { pins = "PH20", "PH21"; function = "can"; }; - clk_out_a_pins_a: clk_out_a@0 { + clk_out_a_pin: clk-out-a-pin { pins = "PI12"; function = "clk_out_a"; }; - clk_out_b_pins_a: clk_out_b@0 { + clk_out_b_pin: clk-out-b-pin { pins = "PI13"; function = "clk_out_b"; }; - emac_pins_a: emac0@0 { + emac_pa_pins: emac-pa-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", @@ -774,7 +775,7 @@ function = "emac"; }; - gmac_pins_mii_a: gmac_mii@0 { + gmac_mii_pins: gmac-mii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", @@ -783,7 +784,7 @@ function = "gmac"; }; - gmac_pins_rgmii_a: gmac_rgmii@0 { + gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA10", @@ -797,47 +798,47 @@ drive-strength = <40>; }; - i2c0_pins_a: i2c0@0 { + i2c0_pins: i2c0-pins { pins = "PB0", "PB1"; function = "i2c0"; }; - i2c1_pins_a: i2c1@0 { + i2c1_pins: i2c1-pins { pins = "PB18", "PB19"; function = "i2c1"; }; - i2c2_pins_a: i2c2@0 { + i2c2_pins: i2c2-pins { pins = "PB20", "PB21"; function = "i2c2"; }; - i2c3_pins_a: i2c3@0 { + i2c3_pins: i2c3-pins { pins = "PI0", "PI1"; function = "i2c3"; }; - ir0_rx_pins_a: ir0@0 { + ir0_rx_pin: ir0-rx-pin { pins = "PB4"; function = "ir0"; }; - ir0_tx_pins_a: ir0@1 { + ir0_tx_pin: ir0-tx-pin { pins = "PB3"; function = "ir0"; }; - ir1_rx_pins_a: ir1@0 { + ir1_rx_pin: ir1-rx-pin { pins = "PB23"; function = "ir1"; }; - ir1_tx_pins_a: ir1@1 { + ir1_tx_pin: ir1-tx-pin { pins = "PB22"; function = "ir1"; }; - mmc0_pins_a: mmc0@0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -845,7 +846,7 @@ bias-pull-up; }; - mmc2_pins_a: mmc2@0 { + mmc2_pins: mmc2-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; function = "mmc2"; @@ -853,7 +854,7 @@ bias-pull-up; }; - mmc3_pins_a: mmc3@0 { + mmc3_pins: mmc3-pins { pins = "PI4", "PI5", "PI6", "PI7", "PI8", "PI9"; function = "mmc3"; @@ -861,118 +862,128 @@ bias-pull-up; }; - ps20_pins_a: ps20@0 { + ps2_0_pins: ps2-0-pins { pins = "PI20", "PI21"; function = "ps2"; }; - ps21_pins_a: ps21@0 { + ps2_1_ph_pins: ps2-1-ph-pins { pins = "PH12", "PH13"; function = "ps2"; }; - pwm0_pins_a: pwm0@0 { + pwm0_pin: pwm0-pin { pins = "PB2"; function = "pwm"; }; - pwm1_pins_a: pwm1@0 { + pwm1_pin: pwm1-pin { pins = "PI3"; function = "pwm"; }; - spdif_tx_pins_a: spdif@0 { + spdif_tx_pin: spdif-tx-pin { pins = "PB13"; function = "spdif"; bias-pull-up; }; - spi0_pins_a: spi0@0 { + spi0_pi_pins: spi0-pi-pins { pins = "PI11", "PI12", "PI13"; function = "spi0"; }; - spi0_cs0_pins_a: spi0_cs0@0 { + spi0_cs0_pi_pin: spi0-cs0-pi-pin { pins = "PI10"; function = "spi0"; }; - spi0_cs1_pins_a: spi0_cs1@0 { + spi0_cs1_pi_pin: spi0-cs1-pi-pin { pins = "PI14"; function = "spi0"; }; - spi1_pins_a: spi1@0 { + spi1_pi_pins: spi1-pi-pins { pins = "PI17", "PI18", "PI19"; function = "spi1"; }; - spi1_cs0_pins_a: spi1_cs0@0 { + spi1_cs0_pi_pin: spi1-cs0-pi-pin { pins = "PI16"; function = "spi1"; }; - spi2_pins_a: spi2@0 { - pins = "PC20", "PC21", "PC22"; + spi2_pb_pins: spi2-pb-pins { + pins = "PB15", "PB16", "PB17"; function = "spi2"; }; - spi2_pins_b: spi2@1 { - pins = "PB15", "PB16", "PB17"; + spi2_cs0_pb_pin: spi2-cs0-pb-pin { + pins = "PB14"; function = "spi2"; }; - spi2_cs0_pins_a: spi2_cs0@0 { - pins = "PC19"; + spi2_pc_pins: spi2-pc-pins { + pins = "PC20", "PC21", "PC22"; function = "spi2"; }; - spi2_cs0_pins_b: spi2_cs0@1 { - pins = "PB14"; + spi2_cs0_pc_pin: spi2-cs0-pc-pin { + pins = "PC19"; function = "spi2"; }; - uart0_pins_a: uart0@0 { + uart0_pb_pins: uart0-pb-pins { pins = "PB22", "PB23"; function = "uart0"; }; - uart2_pins_a: uart2@0 { - pins = "PI16", "PI17", "PI18", "PI19"; + uart2_pi_pins: uart2-pi-pins { + pins = "PI18", "PI19"; function = "uart2"; }; - uart3_pins_a: uart3@0 { - pins = "PG6", "PG7", "PG8", "PG9"; + uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins { + pins = "PI16", "PI17"; + function = "uart2"; + }; + + uart3_pg_pins: uart3-pg-pins { + pins = "PG6", "PG7"; + function = "uart3"; + }; + + uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins { + pins = "PG8", "PG9"; function = "uart3"; }; - uart3_pins_b: uart3@1 { + uart3_ph_pins: uart3-ph-pins { pins = "PH0", "PH1"; function = "uart3"; }; - uart4_pins_a: uart4@0 { + uart4_pg_pins: uart4-pg-pins { pins = "PG10", "PG11"; function = "uart4"; }; - uart4_pins_b: uart4@1 { + uart4_ph_pins: uart4-ph-pins { pins = "PH4", "PH5"; function = "uart4"; }; - uart5_pins_a: uart5@0 { + uart5_pi_pins: uart5-pi-pins { pins = "PI10", "PI11"; function = "uart5"; }; - uart6_pins_a: uart6@0 { + uart6_pi_pins: uart6-pi-pins { pins = "PI12", "PI13"; function = "uart6"; }; - uart7_pins_a: uart7@0 { + uart7_pi_pins: uart7-pi-pins { pins = "PI20", "PI21"; function = "uart7"; }; @@ -1213,6 +1224,8 @@ reg = <0x01c2ac00 0x400>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB1_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1224,6 +1237,8 @@ reg = <0x01c2b000 0x400>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB1_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1235,6 +1250,8 @@ reg = <0x01c2b400 0x400>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB1_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1246,6 +1263,8 @@ reg = <0x01c2b800 0x400>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB1_I2C3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index c16ffcc4db7d..a9c123de5d2c 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -42,8 +42,6 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun8i-a23-a33-ccu.h> @@ -51,13 +49,15 @@ / { interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; chosen { #address-cells = <1>; #size-cells = <1>; ranges; - simplefb_lcd: framebuffer@0 { + simplefb_lcd: framebuffer-lcd0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; @@ -118,7 +118,7 @@ }; }; - soc@1c00000 { + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -169,6 +169,8 @@ resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -298,22 +300,30 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - uart0_pins_a: uart0@0 { - pins = "PF2", "PF4"; - function = "uart0"; + i2c0_pins: i2c0-pins { + pins = "PH2", "PH3"; + function = "i2c0"; }; - uart1_pins_a: uart1@0 { - pins = "PG6", "PG7"; - function = "uart1"; + i2c1_pins: i2c1-pins { + pins = "PH4", "PH5"; + function = "i2c1"; }; - uart1_pins_cts_rts_a: uart1-cts-rts@0 { - pins = "PG8", "PG9"; - function = "uart1"; + i2c2_pins: i2c2-pins { + pins = "PE12", "PE13"; + function = "i2c2"; }; - mmc0_pins_a: mmc0@0 { + lcd_rgb666_pins: lcd-rgb666-pins { + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; + }; + + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -321,7 +331,7 @@ bias-pull-up; }; - mmc1_pins_a: mmc1@0 { + mmc1_pg_pins: mmc1-pg-pins { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -329,7 +339,7 @@ bias-pull-up; }; - mmc2_8bit_pins: mmc2_8bit { + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", @@ -370,32 +380,24 @@ bias-pull-up; }; - pwm0_pins: pwm0 { + pwm0_pin: pwm0-pin { pins = "PH0"; function = "pwm0"; }; - i2c0_pins_a: i2c0@0 { - pins = "PH2", "PH3"; - function = "i2c0"; - }; - - i2c1_pins_a: i2c1@0 { - pins = "PH4", "PH5"; - function = "i2c1"; + uart0_pf_pins: uart0-pf-pins { + pins = "PF2", "PF4"; + function = "uart0"; }; - i2c2_pins_a: i2c2@0 { - pins = "PE12", "PE13"; - function = "i2c2"; + uart1_pg_pins: uart1-pg-pins { + pins = "PG6", "PG7"; + function = "uart1"; }; - lcd_rgb666_pins: lcd-rgb666@0 { - pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", - "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", - "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", - "PD24", "PD25", "PD26", "PD27"; - function = "lcd0"; + uart1_cts_rts_pg_pins: uart1-cts-rts-pg-pins { + pins = "PG8", "PG9"; + function = "uart1"; }; }; @@ -499,6 +501,8 @@ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C0>; resets = <&ccu RST_BUS_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -510,6 +514,8 @@ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -521,6 +527,8 @@ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -565,11 +573,11 @@ }; rtc: rtc@1f00000 { - compatible = "allwinner,sun6i-a31-rtc"; - reg = <0x01f00000 0x54>; + compatible = "allwinner,sun8i-a23-rtc"; + reg = <0x01f00000 0x400>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - clock-output-names = "osc32k"; + clock-output-names = "osc32k", "osc32k-out"; clocks = <&ext_osc32k>; #clock-cells = <1>; }; @@ -656,18 +664,16 @@ gpio-controller; interrupt-controller; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <0>; #gpio-cells = <3>; - r_rsb_pins: r_rsb { + r_rsb_pins: r-rsb-pins { pins = "PL0", "PL1"; function = "s_rsb"; drive-strength = <20>; bias-pull-up; }; - r_uart_pins_a: r_uart@0 { + r_uart_pins_a: r-uart-pins { pins = "PL2", "PL3"; function = "s_uart"; }; diff --git a/arch/arm/boot/dts/sun8i-a23-evb.dts b/arch/arm/boot/dts/sun8i-a23-evb.dts index 8a93697df3a5..53fb1be0401a 100644 --- a/arch/arm/boot/dts/sun8i-a23-evb.dts +++ b/arch/arm/boot/dts/sun8i-a23-evb.dts @@ -65,14 +65,10 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; @@ -80,21 +76,21 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@190 { + button-190 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <190000>; }; - button@390 { + button-390 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <390000>; }; - button@600 { + button-600 { label = "Home"; linux,code = <KEY_HOME>; channel = <0>; @@ -103,22 +99,12 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_evb>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ status = "okay"; }; -&pio { - mmc0_cd_pin_evb: mmc0_cd_pin@0 { - pins = "PB4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - /* * The RX line has a non-populated resistance. In order to use it, you * need to solder R207 on the back of the board in order to close the diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts index e3c7a25ca37d..bcbc9b0758f9 100644 --- a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts +++ b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts @@ -63,7 +63,7 @@ }; &lradc { - button@600 { + button-600 { label = "Back"; linux,code = <KEY_BACK>; channel = <0>; diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts index 649e31339662..d5f6aebd7216 100644 --- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts @@ -54,8 +54,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_pwrseq_pin_mid2407>; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */ /* The esp8089 needs 200 ms after driving wifi-en high */ post-power-on-delay-ms = <200>; @@ -71,7 +69,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_dldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -85,17 +83,6 @@ }; }; -&mmc1_pins_a { - bias-pull-up; -}; - -&r_pio { - wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 { - pins = "PL6"; - function = "gpio_out"; - }; -}; - &touchscreen { reg = <0x40>; compatible = "silead,gsl1680"; diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts index 6b3bcae089f2..9f9232a2fefb 100644 --- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts @@ -54,8 +54,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_pwrseq_pin_mid2809>; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */ /* The esp8089 needs 200 ms after driving wifi-en high */ post-power-on-delay-ms = <200>; @@ -64,7 +62,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_dldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -78,17 +76,6 @@ }; }; -&mmc1_pins_a { - bias-pull-up; -}; - -&r_pio { - wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 { - pins = "PL6"; - function = "gpio_out"; - }; -}; - &touchscreen { reg = <0x40>; compatible = "silead,gsl3670"; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 58e6585b504b..d00055e9eef5 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -45,11 +45,7 @@ #include "sun8i-a23-a33.dtsi" / { - memory { - reg = <0x40000000 0x40000000>; - }; - - soc@1c00000 { + soc { codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-a23-codec"; diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts index f71159987cac..2dfdd0a3151e 100644 --- a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts +++ b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts @@ -69,7 +69,7 @@ }; &lradc { - button@600 { + button-600 { label = "Back"; linux,code = <KEY_BACK>; channel = <0>; @@ -79,7 +79,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_dldo1>; bus-width = <4>; non-removable; diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts index 3e05959104f1..317763069c0a 100644 --- a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts +++ b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts @@ -70,13 +70,9 @@ }; }; -&mmc1_pins_a { - bias-pull-up; -}; - &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_dldo1>; bus-width = <4>; non-removable; @@ -88,7 +84,7 @@ }; &r_pio { - led_pin_d978: led_pin_d978@0 { + led_pin_d978: led-pin { pins = "PL5"; function = "gpio_out"; drive-strength = <20>; @@ -101,7 +97,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_a>, - <&uart1_pins_cts_rts_a>; + pinctrl-0 = <&uart1_pg_pins>, + <&uart1_cts_rts_pg_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts index a1a1eb64caeb..3d78169cdeed 100644 --- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts +++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts @@ -82,8 +82,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ @@ -207,7 +205,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_b>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 541acb4d2b91..f3667268adde 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -117,21 +117,21 @@ vref-supply = <®_dcdc1>; status = "okay"; - button@200 { + button-200 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <191011>; }; - button@400 { + button-400 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <391304>; }; - button@600 { + button-600 { label = "Home"; linux,code = <KEY_HOME>; channel = <0>; @@ -140,8 +140,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ @@ -161,22 +159,12 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ drive-strength = <40>; - /* eMMC is missing pull-ups */ - bias-pull-up; }; &ohci0 { status = "okay"; }; -&pio { - mmc0_cd_pin_sina33: mmc0_cd_pin@0 { - pins = "PB4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &r_rsb { status = "okay"; @@ -278,7 +266,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_b>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index c1cc8f09dd9a..626152c30f50 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -131,14 +131,14 @@ #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; #cooling-cells = <2>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; @@ -148,7 +148,7 @@ #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; @@ -186,32 +186,13 @@ }; }; - memory { - reg = <0x40000000 0x80000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ - cma_pool: cma@4a000000 { - compatible = "shared-dma-pool"; - size = <0x6000000>; - alloc-ranges = <0x4a000000 0x6000000>; - reusable; - linux,cma-default; - }; - }; - sound: sound { compatible = "simple-audio-card"; simple-audio-card,name = "sun8i-a33-audio"; simple-audio-card,format = "i2s"; simple-audio-card,frame-master = <&link_codec>; simple-audio-card,bitclock-master = <&link_codec>; - simple-audio-card,mclk-fs = <512>; + simple-audio-card,mclk-fs = <128>; simple-audio-card,aux-devs = <&codec_analog>; simple-audio-card,routing = "Left DAC", "AIF1 Slot 0 Left", @@ -227,7 +208,7 @@ }; }; - soc@1c00000 { + soc { tcon0: lcd-controller@1c0c000 { compatible = "allwinner,sun8i-a33-tcon"; reg = <0x01c0c000 0x1000>; @@ -269,7 +250,7 @@ }; }; - video-codec@01c0e000 { + video-codec@1c0e000 { compatible = "allwinner,sun8i-a33-video-engine"; reg = <0x01c0e000 0x1000>; clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, @@ -479,11 +460,17 @@ cooling-maps { map0 { trip = <&cpu_alert0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu_alert1>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map2 { @@ -550,7 +537,7 @@ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - uart0_pins_b: uart0@1 { + uart0_pb_pins: uart0-pb-pins { pins = "PB0", "PB1"; function = "uart0"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 583a5a01642f..7d30d3e530fb 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -363,6 +363,24 @@ status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&ac100_rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_dldo1>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + }; +}; + &usbphy { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index e5f0645e53a7..a5a9f5a0603e 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -394,6 +394,24 @@ status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + clocks = <&ac100_rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_dcdc1>; + vddio-supply = <®_sw>; + device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + host-wakeup-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + }; +}; + &usbphy { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 1537ce148cc1..98e8cea26dbe 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -160,6 +160,7 @@ vmmc-supply = <®_dcdc1>; pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; + bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 5617dd387fd3..b099d2fbb5cd 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -187,11 +187,6 @@ status = "disabled"; }; - memory { - reg = <0x40000000 0x80000000>; - device_type = "memory"; - }; - cpu0_opp_table: opp_table0 { compatible = "operating-points-v2"; opp-shared; diff --git a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts new file mode 100644 index 000000000000..2c952eacfef5 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 Centrum Embedded Systems, Jia-Bin Huang <jb@ces.com.tw> + * Copyright (C) 2018 Jonathan McDowell <noodles@earth.li> + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "MapleBoard MP130"; + compatible = "mapleboard,mp130", "allwinner,sun8i-h3"; + + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr_led { + label = "mp130:orange:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status_led { + label = "mp130:orange:status"; + gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + + power { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */ + }; + + user { + label = "user"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "LINEIN", "Line In"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is always on */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index b403e5d787cb..ac8438c2cff1 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -74,6 +74,10 @@ }; }; +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + &ehci3 { status = "okay"; }; @@ -119,6 +123,22 @@ }; }; +&r_i2c { + status = "okay"; + + reg_vdd_cpux: regulator@65 { + compatible = "silergy,sy8106a"; + reg = <0x65>; + regulator-name = "vdd-cpux"; + silergy,fixed-microvolt = <1200000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <200>; + regulator-boot-on; + regulator-always-on; + }; +}; + &usbphy { usb3_vbus-supply = <®_usb3_vbus>; }; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 3ecfabb10151..959d265e7254 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -47,19 +47,19 @@ compatible = "operating-points-v2"; opp-shared; - opp@648000000 { + opp-648000000 { opp-hz = /bits/ 64 <648000000>; opp-microvolt = <1040000 1040000 1300000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@816000000 { + opp-816000000 { opp-hz = /bits/ 64 <816000000>; opp-microvolt = <1100000 1100000 1300000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@1008000000 { + opp-1008000000 { opp-hz = /bits/ 64 <1008000000>; opp-microvolt = <1200000 1200000 1300000>; clock-latency-ns = <244144>; /* 8 32k periods */ @@ -119,24 +119,10 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - cma_pool: cma@4a000000 { - compatible = "shared-dma-pool"; - size = <0x6000000>; - alloc-ranges = <0x4a000000 0x6000000>; - reusable; - linux,cma-default; - }; - }; - soc { - system-control@1c00000 { + syscon: system-control@1c00000 { compatible = "allwinner,sun8i-h3-system-control"; - reg = <0x01c00000 0x30>; + reg = <0x01c00000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -156,7 +142,7 @@ }; }; - video-codec@01c0e000 { + video-codec@1c0e000 { compatible = "allwinner,sun8i-h3-video-engine"; reg = <0x01c0e000 0x1000>; clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, @@ -241,3 +227,7 @@ &pio { compatible = "allwinner,sun8i-h3-pinctrl"; }; + +&rtc { + compatible = "allwinner,sun8i-h3-rtc"; +}; diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index c676940a96da..719ad769b837 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -70,7 +70,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_dldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -82,12 +82,8 @@ }; }; -&mmc1_pins_a { - bias-pull-up; -}; - &r_pio { - wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 { + wifi_pwrseq_pin_q8: wifi-pwrseq-pins { pins = "PL6", "PL7", "PL11"; function = "gpio_in"; bias-pull-up; diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts index 0dbdb29a8fff..e1c75f7fa3ca 100644 --- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts +++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts @@ -91,6 +91,8 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -103,13 +105,13 @@ }; &cpu0_opp_table { - opp@1104000000 { + opp-1104000000 { opp-hz = /bits/ 64 <1104000000>; opp-microvolt = <1320000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1320000>; clock-latency-ns = <244144>; /* 8 32k periods */ @@ -124,30 +126,7 @@ status = "okay"; }; -/* This is the i2c bus exposed on the DSI connector for the touch panel */ -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "disabled"; -}; - -/* This is the i2c bus exposed on the GPIO header */ -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "disabled"; -}; - -/* This is the i2c bus exposed on the CSI connector to control the sensor */ -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "disabled"; -}; - &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ @@ -156,7 +135,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_aldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -292,14 +271,26 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_b>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_a>, <&uart1_pins_cts_rts_a>; + pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_dldo1>; + vddio-supply = <®_aldo3>; + device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + host-wakeup-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + shutdown-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + }; }; &usb_otg { diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts index fc0658cfa319..32cf1ab33aab 100644 --- a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts +++ b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts @@ -25,7 +25,7 @@ * PF can also be used for the SD card so PB is preferred. */ pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pf_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts index 472c03b7aeab..316998e9ec5d 100644 --- a/arch/arm/boot/dts/sun8i-r16-parrot.dts +++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts @@ -63,8 +63,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_parrot>; led1 { label = "parrot:led1:usr"; @@ -97,8 +95,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; /* @@ -111,14 +107,14 @@ vref-supply = <®_aldo3>; status = "okay"; - button@0 { + button-190 { label = "V+"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <190000>; }; - button@1 { + button-390 { label = "V-"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; @@ -128,8 +124,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_parrot>; vmmc-supply = <®_dcdc1>; cd-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */ bus-width = <4>; @@ -138,7 +132,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_parrot>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_aldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -158,7 +152,6 @@ &mmc2_8bit_pins { drive-strength = <40>; - bias-pull-up; }; &ohci0 { @@ -166,34 +159,11 @@ }; &pio { - mmc0_cd_pin_parrot: mmc0_cd_pin@0 { - pins = "PD14"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_parrot: led_pins@0 { - pins = "PE16", "PE17"; - function = "gpio_out"; - }; - - usb0_id_det: usb0_id_detect_pin@0 { + usb0_id_det: usb0-id-detect-pin { pins = "PD10"; function = "gpio_in"; bias-pull-up; }; - - usb1_vbus_pin_parrot: usb1_vbus_pin@0 { - pins = "PD12"; - function = "gpio_out"; - }; -}; - -&r_pio { - wifi_reset_pin_parrot: wifi_reset_pin@0 { - pins = "PL6"; - function = "gpio_out"; - }; }; &r_rsb { @@ -319,8 +289,6 @@ }; ®_usb1_vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_parrot>; gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */ status = "okay"; }; @@ -331,7 +299,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_b>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index 6f4c9ca5a3ee..89762dbefe42 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -61,6 +61,7 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; clock-output-names = "osc24M"; }; @@ -68,7 +69,8 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; + clock-accuracy = <20000>; + clock-output-names = "ext-osc32k"; }; }; @@ -313,17 +315,27 @@ ccu: clock@1c20000 { compatible = "allwinner,sun8i-r40-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; }; + rtc: rtc@1c20400 { + compatible = "allwinner,sun8i-r40-rtc", + "allwinner,sun8i-h3-rtc"; + reg = <0x01c20400 0x400>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clock-output-names = "osc32k", "osc32k-out"; + clocks = <&osc32k>; + #clock-cells = <1>; + }; + pio: pinctrl@1c20800 { compatible = "allwinner,sun8i-r40-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi index 5e8a95af89b8..189e479eb95a 100644 --- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi @@ -73,8 +73,6 @@ reg = <0x40>; interrupt-parent = <&pio>; interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_power_pin>; power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ /* Tablet dts must provide reg and compatible */ status = "disabled"; @@ -82,8 +80,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ @@ -91,18 +87,7 @@ }; &pio { - mmc0_cd_pin: mmc0_cd_pin@0 { - pins = "PB4"; - function = "gpio_in"; - bias-pull-up; - }; - - ts_power_pin: ts_power_pin@0 { - pins = "PH1"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH8"; function = "gpio_in"; bias-pull-up; diff --git a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts new file mode 100644 index 000000000000..6931aaab2382 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org> + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> + * Copyright (C) 2018 Hao Zhang <hao5781286@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-r40.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "t3-cqa3t-bv3"; + compatible = "qihua,t3-cqa3t-bv3", "allwinner,sun8i-t3", + "allwinner,sun8i-r40"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + enable-active-high; + }; +}; + +&ahci { + ahci-supply = <®_dldo4>; + phy-supply = <®_eldo3>; + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&i2c0 { + status = "okay"; + + axp22x: pmic@34 { + compatible = "x-powers,axp221"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +&mmc0 { + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */ + status = "okay"; +}; + +&mmc2 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pa"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pg"; +}; + +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-dldo3"; +}; + +®_eldo3 { + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-pe"; +}; + +&tcon_tv0 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc5v0>; + usb2_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts index ad173605b1b8..db5cd0b8574b 100644 --- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts @@ -66,28 +66,28 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@200 { + button-200 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <200000>; }; - button@400 { + button-400 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <400000>; }; - button@600 { + button-600 { label = "Select"; linux,code = <KEY_SELECT>; channel = <0>; voltage = <600000>; }; - button@800 { + button-800 { label = "Start"; linux,code = <KEY_OK>; channel = <0>; diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts index 387fc2aa546d..99c8cf7bb86c 100644 --- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts @@ -78,8 +78,6 @@ }; &mmc0 { - pinctrl-0 = <&mmc0_pins_a>; - pinctrl-names = "default"; broken-cd; bus-width = <4>; vmmc-supply = <®_vcc3v3>; @@ -87,7 +85,7 @@ }; &uart0 { - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 443b083c6adc..21e1806ca509 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -192,6 +192,8 @@ resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -292,17 +294,17 @@ interrupt-controller; #interrupt-cells = <3>; - i2c0_pins: i2c0 { + i2c0_pins: i2c0-pins { pins = "PB6", "PB7"; function = "i2c0"; }; - uart0_pins_a: uart0@0 { + uart0_pb_pins: uart0-pb-pins { pins = "PB8", "PB9"; function = "uart0"; }; - mmc0_pins_a: mmc0@0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -310,7 +312,7 @@ bias-pull-up; }; - mmc1_pins: mmc1 { + mmc1_pins: mmc1-pins { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -318,7 +320,7 @@ bias-pull-up; }; - spi0_pins: spi0 { + spi0_pins: spi0-pins { pins = "PC0", "PC1", "PC2", "PC3"; function = "spi0"; }; diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts new file mode 100644 index 000000000000..a1154e6c7cb5 --- /dev/null +++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright 2018 Icenowy Zheng <icenowy@aosc.io> + */ + +/dts-v1/; +#include "suniv-f1c100s.dtsi" + +/ { + model = "Lichee Pi Nano"; + compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pe_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi new file mode 100644 index 000000000000..6100d3b75f61 --- /dev/null +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright 2018 Icenowy Zheng <icenowy@aosc.io> + * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com> + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + clocks { + osc24M: clk-24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: clk-32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + }; + + cpus { + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram-controller@1c00000 { + compatible = "allwinner,suniv-f1c100s-system-control", + "allwinner,sun4i-a10-system-control"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_d: sram@10000 { + compatible = "mmio-sram"; + reg = <0x00010000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00010000 0x1000>; + + otg_sram: sram-section@0 { + compatible = "allwinner,suniv-f1c100s-sram-d", + "allwinner,sun4i-a10-sram-d"; + reg = <0x0000 0x1000>; + status = "disabled"; + }; + }; + }; + + ccu: clock@1c20000 { + compatible = "allwinner,suniv-f1c100s-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + intc: interrupt-controller@1c20400 { + compatible = "allwinner,suniv-f1c100s-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + pio: pinctrl@1c20800 { + compatible = "allwinner,suniv-f1c100s-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <38>, <39>, <40>; + clocks = <&ccu 37>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #gpio-cells = <3>; + + uart0_pe_pins: uart0-pe-pins { + pins = "PE0", "PE1"; + function = "uart0"; + }; + }; + + timer@1c20c00 { + compatible = "allwinner,suniv-f1c100s-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <13>; + clocks = <&osc24M>; + }; + + wdt: watchdog@1c20ca0 { + compatible = "allwinner,suniv-f1c100s-wdt", + "allwinner,sun4i-a10-wdt"; + reg = <0x01c20ca0 0x20>; + }; + + uart0: serial@1c25000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c25000 0x400>; + interrupts = <1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 38>; + resets = <&ccu 24>; + status = "disabled"; + }; + + uart1: serial@1c25400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c25400 0x400>; + interrupts = <2>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 39>; + resets = <&ccu 25>; + status = "disabled"; + }; + + uart2: serial@1c25800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c25800 0x400>; + interrupts = <3>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 40>; + resets = <&ccu 26>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 4b1530ebe427..a4c757c0b741 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -86,6 +86,7 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; clock-output-names = "osc24M"; }; @@ -93,15 +94,8 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - iosc: internal-osc-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <16000000>; - clock-accuracy = <300000000>; - clock-output-names = "iosc"; + clock-accuracy = <50000>; + clock-output-names = "ext_osc32k"; }; }; @@ -152,12 +146,6 @@ }; }; - syscon: syscon@1c00000 { - compatible = "allwinner,sun8i-h3-system-controller", - "syscon"; - reg = <0x01c00000 0x1000>; - }; - dma: dma-controller@1c02000 { compatible = "allwinner,sun8i-h3-dma"; reg = <0x01c02000 0x1000>; @@ -375,7 +363,7 @@ ccu: clock@1c20000 { /* compatible is in per SoC .dtsi file */ reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -386,13 +374,20 @@ reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; interrupt-controller; #interrupt-cells = <3>; + csi_pins: csi { + pins = "PE0", "PE2", "PE3", "PE4", "PE5", + "PE6", "PE7", "PE8", "PE9", "PE10", + "PE11"; + function = "csi"; + }; + emac_rgmii_pins: emac0 { pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD7", "PD8", "PD9", "PD10", @@ -744,6 +739,21 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + csi: camera@1cb0000 { + compatible = "allwinner,sun8i-h3-csi", + "allwinner,sun6i-a31-csi"; + reg = <0x01cb0000 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + pinctrl-names = "default"; + pinctrl-0 = <&csi_pins>; + status = "disabled"; + }; + hdmi: hdmi@1ee0000 { compatible = "allwinner,sun8i-h3-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi"; @@ -789,17 +799,19 @@ }; rtc: rtc@1f00000 { - compatible = "allwinner,sun6i-a31-rtc"; - reg = <0x01f00000 0x54>; + /* compatible is in per SoC .dtsi file */ + reg = <0x01f00000 0x400>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clock-output-names = "osc32k", "osc32k-out", "iosc"; + clocks = <&osc32k>; + #clock-cells = <1>; }; r_ccu: clock@1f01400 { compatible = "allwinner,sun8i-h3-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&osc32k>, <&iosc>, - <&ccu 9>; + clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 9>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; @@ -837,7 +849,7 @@ compatible = "allwinner,sun8i-h3-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; + clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi index ddf4e722ea93..0d002f83a259 100644 --- a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi +++ b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi @@ -121,7 +121,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi b/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi index 245d0bcde441..117198c52e1f 100644 --- a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi @@ -46,13 +46,13 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; }; &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; @@ -60,14 +60,14 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@200 { + button-200 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <200000>; }; - button@400 { + button-400 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; @@ -77,6 +77,6 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 183c5acafb22..b113e47b2b2a 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -140,6 +140,18 @@ status = "disabled"; }; + vic@54340000 { + compatible = "nvidia,tegra124-vic"; + reg = <0x0 0x54340000 0x0 0x00040000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_VIC03>; + clock-names = "vic"; + resets = <&tegra_car 178>; + reset-names = "vic"; + + iommus = <&mc TEGRA_SWGROUP_VIC>; + }; + sor@54540000 { compatible = "nvidia,tegra124-sor"; reg = <0x0 0x54540000 0x0 0x00040000>; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 20869757d32f..dcad6d6128cf 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -632,6 +632,8 @@ memory-controller@7000f400 { compatible = "nvidia,tegra20-emc"; reg = <0x7000f400 0x200>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_EMC>; #address-cells = <1>; #size-cells = <0>; }; diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index b73d594b6dcd..c2706cef0b8a 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -235,6 +235,16 @@ }; }; + dmac: dma-controller@5a000000 { + compatible = "socionext,uniphier-mio-dmac"; + reg = <0x5a000000 0x1000>; + interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, + <0 71 4>, <0 72 4>, <0 73 4>; + clocks = <&mio_clk 7>; + resets = <&mio_rst 7>; + #dma-cells = <1>; + }; + sd: sdhc@5a400000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; @@ -246,6 +256,8 @@ clocks = <&mio_clk 0>; reset-names = "host", "bridge"; resets = <&mio_rst 0>, <&mio_rst 3>; + dma-names = "rx-tx"; + dmas = <&dmac 4>; bus-width = <4>; cap-sd-highspeed; sd-uhs-sdr12; @@ -263,6 +275,8 @@ clocks = <&mio_clk 1>; reset-names = "host", "bridge", "hw"; resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; + dma-names = "rx-tx"; + dmas = <&dmac 6>; bus-width = <8>; cap-mmc-highspeed; cap-mmc-hw-reset; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 0beb606cf3c8..97d051ef4968 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -269,6 +269,16 @@ }; }; + dmac: dma-controller@5a000000 { + compatible = "socionext,uniphier-mio-dmac"; + reg = <0x5a000000 0x1000>; + interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, + <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>; + clocks = <&mio_clk 7>; + resets = <&mio_rst 7>; + #dma-cells = <1>; + }; + sd: sdhc@5a400000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; @@ -280,6 +290,8 @@ clocks = <&mio_clk 0>; reset-names = "host", "bridge"; resets = <&mio_rst 0>, <&mio_rst 3>; + dma-names = "rx-tx"; + dmas = <&dmac 4>; bus-width = <4>; cap-sd-highspeed; sd-uhs-sdr12; @@ -297,6 +309,8 @@ clocks = <&mio_clk 1>; reset-names = "host", "bridge", "hw"; resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; + dma-names = "rx-tx"; + dmas = <&dmac 5>; bus-width = <8>; cap-mmc-highspeed; cap-mmc-hw-reset; @@ -313,6 +327,8 @@ clocks = <&mio_clk 2>; reset-names = "host", "bridge"; resets = <&mio_rst 2>, <&mio_rst 5>; + dma-names = "rx-tx"; + dmas = <&dmac 6>; bus-width = <4>; cap-sd-highspeed; }; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 8d20e9548e39..06a049f6edf8 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -141,8 +141,10 @@ cooling-maps { map { trip = <&cpu_alert>; - cooling-device = <&cpu0 - THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index f7fcf6b45995..efce02768b6f 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -239,6 +239,16 @@ }; }; + dmac: dma-controller@5a000000 { + compatible = "socionext,uniphier-mio-dmac"; + reg = <0x5a000000 0x1000>; + interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, + <0 71 4>, <0 72 4>, <0 73 4>; + clocks = <&mio_clk 7>; + resets = <&mio_rst 7>; + #dma-cells = <1>; + }; + sd: sdhc@5a400000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; @@ -250,6 +260,8 @@ clocks = <&mio_clk 0>; reset-names = "host", "bridge"; resets = <&mio_rst 0>, <&mio_rst 3>; + dma-names = "rx-tx"; + dmas = <&dmac 4>; bus-width = <4>; cap-sd-highspeed; sd-uhs-sdr12; @@ -267,6 +279,8 @@ clocks = <&mio_clk 1>; reset-names = "host", "bridge", "hw"; resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; + dma-names = "rx-tx"; + dmas = <&dmac 6>; bus-width = <8>; cap-mmc-highspeed; cap-mmc-hw-reset; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 4488c8fe213a..a9569d15de41 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -43,11 +43,6 @@ bank-width = <4>; }; - v2m_video_ram: vram@2,00000000 { - compatible = "arm,vexpress-vram"; - reg = <2 0x00000000 0x00800000>; - }; - ethernet@2,02000000 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <2 0x02000000 0x10000>; @@ -223,13 +218,24 @@ v2m_i2c_dvi: i2c@160000 { compatible = "arm,versatile-i2c"; reg = <0x160000 0x1000>; - #address-cells = <1>; #size-cells = <0>; dvi-transmitter@39 { compatible = "sil,sii9022-tpi", "sil,sii9022"; reg = <0x39>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dvi_bridge_in: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + }; }; dvi-transmitter@60 { @@ -260,37 +266,16 @@ interrupts = <14>; clocks = <&v2m_oscclk1>, <&smbclk>; clock-names = "clcdclk", "apb_pclk"; - memory-region = <&v2m_video_ram>; - max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */ + /* 800x600 16bpp @36MHz works fine */ + max-memory-bandwidth = <54000000>; + memory-region = <&vram>; port { - v2m_clcd_pads: endpoint { - remote-endpoint = <&v2m_clcd_panel>; + clcd_pads: endpoint { + remote-endpoint = <&dvi_bridge_in>; arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; - - panel { - compatible = "panel-dpi"; - - port { - v2m_clcd_panel: endpoint { - remote-endpoint = <&v2m_clcd_pads>; - }; - }; - - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <40>; - hfront-porch = <24>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <2>; - }; - }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index 4db42f6326a3..fd42e1194179 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -43,11 +43,6 @@ bank-width = <4>; }; - v2m_video_ram: vram@3,00000000 { - compatible = "arm,vexpress-vram"; - reg = <3 0x00000000 0x00800000>; - }; - ethernet@3,02000000 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <3 0x02000000 0x10000>; @@ -223,13 +218,37 @@ v2m_i2c_dvi: i2c@16000 { compatible = "arm,versatile-i2c"; reg = <0x16000 0x1000>; - #address-cells = <1>; #size-cells = <0>; dvi-transmitter@39 { compatible = "sil,sii9022-tpi", "sil,sii9022"; reg = <0x39>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Both the core tile and the motherboard routes their output + * pads to this transmitter. The motherboard system controller + * can select one of them as input using a mux register in + * "arm,vexpress-muxfpga". The Vexpress with the CA9 core tile is + * the only platform with this specific set-up. + */ + port@0 { + reg = <0>; + dvi_bridge_in_ct: endpoint { + remote-endpoint = <&clcd_pads_ct>; + }; + }; + port@1 { + reg = <1>; + dvi_bridge_in_mb: endpoint { + remote-endpoint = <&clcd_pads_mb>; + }; + }; + }; }; dvi-transmitter@60 { @@ -253,6 +272,7 @@ reg-shift = <2>; }; + clcd@1f000 { compatible = "arm,pl111", "arm,primecell"; reg = <0x1f000 0x1000>; @@ -260,37 +280,16 @@ interrupts = <14>; clocks = <&v2m_oscclk1>, <&smbclk>; clock-names = "clcdclk", "apb_pclk"; - memory-region = <&v2m_video_ram>; - max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */ + /* 800x600 16bpp @36MHz works fine */ + max-memory-bandwidth = <54000000>; + memory-region = <&vram>; port { - v2m_clcd_pads: endpoint { - remote-endpoint = <&v2m_clcd_panel>; + clcd_pads_mb: endpoint { + remote-endpoint = <&dvi_bridge_in_mb>; arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; - - panel { - compatible = "panel-dpi"; - - port { - v2m_clcd_panel: endpoint { - remote-endpoint = <&v2m_clcd_pads>; - }; - }; - - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <40>; - hfront-porch = <24>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <2>; - }; - }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 3971427a105b..0dc4277d5f8b 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -53,6 +53,20 @@ reg = <0 0x80000000 0 0x40000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* Chipselect 2 is physically at 0x18000000 */ + vram: vram@18000000 { + /* 8 MB of designated video RAM */ + compatible = "shared-dma-pool"; + reg = <0 0x18000000 0 0x00800000>; + no-map; + }; + }; + hdlcd@2b000000 { compatible = "arm,hdlcd"; reg = <0 0x2b000000 0 0x1000>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index ac6b90e9d806..a2ccacd07f4f 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -104,6 +104,20 @@ reg = <0 0x80000000 0 0x40000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* Chipselect 2 is physically at 0x18000000 */ + vram: vram@18000000 { + /* 8 MB of designated video RAM */ + compatible = "shared-dma-pool"; + reg = <0 0x18000000 0 0x00800000>; + no-map; + }; + }; + wdt@2a490000 { compatible = "arm,sp805", "arm,primecell"; reg = <0 0x2a490000 0 0x1000>; @@ -393,10 +407,11 @@ clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - etb_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port0>; + in-ports { + port { + etb_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; }; }; }; @@ -407,10 +422,11 @@ clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - tpiu_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port1>; + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; }; }; }; @@ -421,11 +437,10 @@ */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; - /* replicator output ports */ port@0 { reg = <0>; replicator_out_port0: endpoint { @@ -439,12 +454,11 @@ remote-endpoint = <&tpiu_in_port>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator_in_port0: endpoint { - slave-mode; remote-endpoint = <&funnel_out_port0>; }; }; @@ -457,40 +471,36 @@ clocks = <&oscclk6a>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel_out_port0: endpoint { remote-endpoint = <&replicator_in_port0>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&ptm0_out_port>; }; }; - port@2 { + port@1 { reg = <1>; funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&ptm1_out_port>; }; }; - port@3 { + port@2 { reg = <2>; funnel_in_port2: endpoint { - slave-mode; remote-endpoint = <&etm0_out_port>; }; }; @@ -500,7 +510,6 @@ port@4 { reg = <4>; funnel_in_port4: endpoint { - slave-mode; remote-endpoint = <&etm1_out_port>; }; }; @@ -508,7 +517,6 @@ port@5 { reg = <5>; funnel_in_port5: endpoint { - slave-mode; remote-endpoint = <&etm2_out_port>; }; }; @@ -522,9 +530,11 @@ cpu = <&cpu0>; clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - ptm0_out_port: endpoint { - remote-endpoint = <&funnel_in_port0>; + out-ports { + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; }; }; }; @@ -536,9 +546,11 @@ cpu = <&cpu1>; clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - ptm1_out_port: endpoint { - remote-endpoint = <&funnel_in_port1>; + out-ports { + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel_in_port1>; + }; }; }; }; @@ -550,9 +562,11 @@ cpu = <&cpu2>; clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - etm0_out_port: endpoint { - remote-endpoint = <&funnel_in_port2>; + out-ports { + port { + etm0_out_port: endpoint { + remote-endpoint = <&funnel_in_port2>; + }; }; }; }; @@ -564,9 +578,11 @@ cpu = <&cpu3>; clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - etm1_out_port: endpoint { - remote-endpoint = <&funnel_in_port4>; + out-ports { + port { + etm1_out_port: endpoint { + remote-endpoint = <&funnel_in_port4>; + }; }; }; }; @@ -578,9 +594,11 @@ cpu = <&cpu4>; clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - etm2_out_port: endpoint { - remote-endpoint = <&funnel_in_port5>; + out-ports { + port { + etm2_out_port: endpoint { + remote-endpoint = <&funnel_in_port5>; + }; }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index e5b4a7570a01..d5b47d526f9e 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -55,6 +55,20 @@ reg = <0x80000000 0x40000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Chipselect 2 is physically at 0x18000000 */ + vram: vram@18000000 { + /* 8 MB of designated video RAM */ + compatible = "shared-dma-pool"; + reg = <0x18000000 0x00800000>; + no-map; + }; + }; + hdlcd@2a110000 { compatible = "arm,hdlcd"; reg = <0x2a110000 0x1000>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index fc43873cbdff..d796efaadbe3 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -69,6 +69,20 @@ reg = <0x60000000 0x40000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Chipselect 3 is physically at 0x4c000000 */ + vram: vram@4c000000 { + /* 8 MB of designated video RAM */ + compatible = "shared-dma-pool"; + reg = <0x4c000000 0x00800000>; + no-map; + }; + }; + clcd@10020000 { compatible = "arm,pl111", "arm,primecell"; reg = <0x10020000 0x1000>; @@ -76,36 +90,15 @@ interrupts = <0 44 4>; clocks = <&oscclk1>, <&oscclk2>; clock-names = "clcdclk", "apb_pclk"; - max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ + /* 1024x768 16bpp @65MHz */ + max-memory-bandwidth = <95000000>; port { - clcd_pads: endpoint { - remote-endpoint = <&clcd_panel>; + clcd_pads_ct: endpoint { + remote-endpoint = <&dvi_bridge_in_ct>; arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; - - panel { - compatible = "panel-dpi"; - - port { - clcd_panel: endpoint { - remote-endpoint = <&clcd_pads>; - }; - }; - - panel-timing { - clock-frequency = <63500127>; - hactive = <1024>; - hback-porch = <152>; - hfront-porch = <48>; - hsync-len = <104>; - vactive = <768>; - vback-porch = <23>; - vfront-porch = <3>; - vsync-len = <4>; - }; - }; }; memory-controller@100e0000 { diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index 2e7e3cebba1c..237b0246fa84 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -47,6 +47,7 @@ compatible = "toradex,vf610-colibri_vf50", "fsl,vf500"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index 76a0949df4a8..b0ec475017ad 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -10,7 +10,6 @@ #size-cells = <1>; chosen { }; aliases { }; - memory { device_type = "memory"; }; cpus { #address-cells = <1>; diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts new file mode 100644 index 000000000000..689c8930dce3 --- /dev/null +++ b/arch/arm/boot/dts/vf610-bk4.dts @@ -0,0 +1,502 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "Liebherr BK4 controller"; + compatible = "lwn,bk4", "fsl,vf610"; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x8000000>; + }; + + audio_ext: oscillator-audio { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + enet_ext: oscillator-ethernet { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + /* LED D5 */ + led0: heartbeat { + label = "heartbeat"; + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vcc_3v3_mcu: regulator-vcc3v3mcu { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&clks { + clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>; + clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext"; +}; + +&dspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi0>; + bus-num = <0>; + status = "okay"; + + spidev0@0 { + compatible = "lwn,bk4"; + spi-max-frequency = <30000000>; + reg = <0>; + fsl,spi-cs-sck-delay = <200>; + fsl,spi-sck-cs-delay = <400>; + }; +}; + +&dspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi3>; + bus-num = <3>; + status = "okay"; + spi-slave; + + slave@0 { + compatible = "lwn,bk4"; + spi-max-frequency = <30000000>; + reg = <0>; + }; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec0 { + phy-mode = "rmii"; + phy-handle = <ðphy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + reg = <1>; + clocks = <&clks VF610_CLK_ENET_50M>; + clock-names = "rmii-ref"; + }; + }; +}; + +&fec1 { + phy-mode = "rmii"; + phy-handle = <ðphy1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + clocks = <&clks VF610_CLK_ENET_50M>; + clock-names = "rmii-ref"; + }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + at24c256: eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + + m41t62: rtc@68 { + compatible = "st,m41t62"; + reg = <0x68>; + }; +}; + +&nfc { + assigned-clocks = <&clks VF610_CLK_NFC>; + assigned-clock-rates = <33000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + status = "okay"; + + nand@0 { + compatible = "fsl,vf610-nfc-nandcs"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-bus-width = <16>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <24>; + nand-ecc-step-size = <2048>; + nand-on-flash-bbt; + }; +}; + +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi0>; + status = "okay"; + + n25q128a13_4: flash@0 { + compatible = "n25q128a13", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + reg = <0>; + }; + + n25q128a13_2: flash@1 { + compatible = "n25q128a13", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <66000000>; + spi-rx-bus-width = <2>; + reg = <1>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbdev0 { + disable-over-current; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; + +&usbmisc0 { + status = "okay"; +}; + +&usbmisc1 { + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* One_Wire_PSU_EN */ + VF610_PAD_PTC29__GPIO_102 0x1183 + /* SPI ENABLE */ + VF610_PAD_PTB26__GPIO_96 0x1183 + /* EB control */ + VF610_PAD_PTE14__GPIO_119 0x1183 + VF610_PAD_PTE4__GPIO_109 0x1181 + /* Feedback_Lines */ + VF610_PAD_PTC31__GPIO_104 0x1181 + VF610_PAD_PTA7__GPIO_134 0x1181 + VF610_PAD_PTD9__GPIO_88 0x1181 + VF610_PAD_PTE1__GPIO_106 0x1183 + VF610_PAD_PTB2__GPIO_24 0x1181 + VF610_PAD_PTB3__GPIO_25 0x1181 + VF610_PAD_PTB1__GPIO_23 0x1181 + /* SDHC Enable */ + VF610_PAD_PTE19__GPIO_124 0x1183 + /* SDHC Overcurrent */ + VF610_PAD_PTB23__GPIO_93 0x1181 + /* GPI */ + VF610_PAD_PTE2__GPIO_107 0x1181 + VF610_PAD_PTE3__GPIO_108 0x1181 + VF610_PAD_PTE5__GPIO_110 0x1181 + VF610_PAD_PTE6__GPIO_111 0x1181 + /* GPO */ + VF610_PAD_PTE0__GPIO_105 0x1183 + VF610_PAD_PTE7__GPIO_112 0x1183 + /* RS485 Control */ + VF610_PAD_PTB8__GPIO_30 0x1183 + VF610_PAD_PTB9__GPIO_31 0x1183 + VF610_PAD_PTE8__GPIO_113 0x1183 + /* MPBUS MPB_EN */ + VF610_PAD_PTE28__GPIO_133 0x1183 + /* MISC */ + VF610_PAD_PTE10__GPIO_115 0x1183 + VF610_PAD_PTE11__GPIO_116 0x1183 + VF610_PAD_PTE17__GPIO_122 0x1183 + VF610_PAD_PTC30__GPIO_103 0x1183 + VF610_PAD_PTB0__GPIO_22 0x1181 + /* RESETINFO */ + VF610_PAD_PTE26__GPIO_131 0x1183 + VF610_PAD_PTD6__GPIO_85 0x1181 + VF610_PAD_PTE27__GPIO_132 0x1181 + VF610_PAD_PTE13__GPIO_118 0x1181 + VF610_PAD_PTE21__GPIO_126 0x1181 + VF610_PAD_PTE22__GPIO_127 0x1181 + /* EE_5V_EN */ + VF610_PAD_PTE18__GPIO_123 0x1183 + /* EE_5V_OC_N */ + VF610_PAD_PTE25__GPIO_130 0x1181 + >; + }; + + pinctrl_can0: can0grp { + fsl,pins = < + VF610_PAD_PTB14__CAN0_RX 0x1181 + VF610_PAD_PTB15__CAN0_TX 0x1182 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + VF610_PAD_PTB16__CAN1_RX 0x1181 + VF610_PAD_PTB17__CAN1_TX 0x1182 + >; + }; + + pinctrl_dspi0: dspi0grp { + fsl,pins = < + VF610_PAD_PTB18__DSPI0_CS1 0x1182 + VF610_PAD_PTB19__DSPI0_CS0 0x1182 + VF610_PAD_PTB20__DSPI0_SIN 0x1181 + VF610_PAD_PTB21__DSPI0_SOUT 0x1182 + VF610_PAD_PTB22__DSPI0_SCK 0x1182 + >; + }; + + pinctrl_dspi3: dspi3grp { + fsl,pins = < + VF610_PAD_PTD10__DSPI3_CS0 0x1181 + VF610_PAD_PTD11__DSPI3_SIN 0x1181 + VF610_PAD_PTD12__DSPI3_SOUT 0x1182 + VF610_PAD_PTD13__DSPI3_SCK 0x1181 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; + + pinctrl_fec0: fec0grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30dd + VF610_PAD_PTC0__ENET_RMII0_MDC 0x30de + VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30df + VF610_PAD_PTC2__ENET_RMII0_CRS 0x30dd + VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30dd + VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30dd + VF610_PAD_PTC5__ENET_RMII0_RXER 0x30dd + VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30de + VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30de + VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30de + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30de + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30df + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30dd + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30dd + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30dd + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30dd + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30de + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30de + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30de + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + /* Heart bit LED */ + VF610_PAD_PTE12__GPIO_117 0x1183 + /* LEDS */ + VF610_PAD_PTE15__GPIO_120 0x1183 + VF610_PAD_PTA12__GPIO_5 0x1183 + VF610_PAD_PTA16__GPIO_6 0x1183 + VF610_PAD_PTE9__GPIO_114 0x1183 + VF610_PAD_PTE20__GPIO_125 0x1183 + VF610_PAD_PTE23__GPIO_128 0x1183 + VF610_PAD_PTE16__GPIO_121 0x1183 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + VF610_PAD_PTA22__I2C2_SCL 0x34df + VF610_PAD_PTA23__I2C2_SDA 0x34df + >; + }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + VF610_PAD_PTD23__NF_IO7 0x28df + VF610_PAD_PTD22__NF_IO6 0x28df + VF610_PAD_PTD21__NF_IO5 0x28df + VF610_PAD_PTD20__NF_IO4 0x28df + VF610_PAD_PTD19__NF_IO3 0x28df + VF610_PAD_PTD18__NF_IO2 0x28df + VF610_PAD_PTD17__NF_IO1 0x28df + VF610_PAD_PTD16__NF_IO0 0x28df + VF610_PAD_PTB24__NF_WE_B 0x28c2 + VF610_PAD_PTB25__NF_CE0_B 0x28c2 + VF610_PAD_PTB27__NF_RE_B 0x28c2 + VF610_PAD_PTC26__NF_RB_B 0x283d + VF610_PAD_PTC27__NF_ALE 0x28c2 + VF610_PAD_PTC28__NF_CLE 0x28c2 + >; + }; + + pinctrl_qspi0: qspi0grp { + fsl,pins = < + VF610_PAD_PTD0__QSPI0_A_QSCK 0x397f + VF610_PAD_PTD1__QSPI0_A_CS0 0x397f + VF610_PAD_PTD2__QSPI0_A_DATA3 0x397f + VF610_PAD_PTD3__QSPI0_A_DATA2 0x397f + VF610_PAD_PTD4__QSPI0_A_DATA1 0x397f + VF610_PAD_PTD5__QSPI0_A_DATA0 0x397f + VF610_PAD_PTD7__QSPI0_B_QSCK 0x397f + VF610_PAD_PTD8__QSPI0_B_CS0 0x397f + VF610_PAD_PTD11__QSPI0_B_DATA1 0x397f + VF610_PAD_PTD12__QSPI0_B_DATA0 0x397f + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTB6__UART2_TX 0x21a2 + VF610_PAD_PTB7__UART2_RX 0x21a1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + VF610_PAD_PTA20__UART3_TX 0x21a2 + VF610_PAD_PTA21__UART3_RX 0x21a1 + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index aeaf99f1f0fc..05c9a39509b8 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -47,6 +47,7 @@ compatible = "toradex,vf610-colibri_vf61", "fsl,vf610"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x10000000>; }; }; diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts index a3014e8d97a9..ea1b996a6bca 100644 --- a/arch/arm/boot/dts/vf610-cosmic.dts +++ b/arch/arm/boot/dts/vf610-cosmic.dts @@ -20,6 +20,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 59fceea8805d..dbb5ffcdcec4 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -14,6 +14,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts index b76c3d0413df..7cdcc5fe8282 100644 --- a/arch/arm/boot/dts/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -16,6 +16,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi index 5ae5abfe1d55..19eb4a849efb 100644 --- a/arch/arm/boot/dts/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -50,6 +50,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts new file mode 100644 index 000000000000..de6dfa57bec5 --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts @@ -0,0 +1,851 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// +// Copyright (C) 2016-2018 Zodiac Inflight Innovations + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "ZII VF610 SCU4 AIB"; + compatible = "zii,vf610scu4-aib", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + debug { + label = "zii:green:debug1"; + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + mdio-mux { + compatible = "mdio-mux-gpio"; + pinctrl-0 = <&pinctrl_mdio_mux>; + pinctrl-names = "default"; + gpios = <&gpio4 4 GPIO_ACTIVE_HIGH + &gpio4 5 GPIO_ACTIVE_HIGH + &gpio3 30 GPIO_ACTIVE_HIGH + &gpio3 31 GPIO_ACTIVE_HIGH>; + mdio-parent-bus = <&mdio1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio_mux_1: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + switch0: switch0@0 { + compatible = "marvell,mv88e6190"; + reg = <0>; + dsa,member = <0 0>; + eeprom-length = <65536>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "aib2main_1"; + }; + + port@2 { + reg = <2>; + label = "aib2main_2"; + }; + + port@3 { + reg = <3>; + label = "eth_cu_1000_5"; + }; + + port@4 { + reg = <4>; + label = "eth_cu_1000_6"; + }; + + port@5 { + reg = <5>; + label = "eth_cu_1000_4"; + }; + + port@6 { + reg = <6>; + label = "eth_cu_1000_7"; + }; + + port@7 { + reg = <7>; + label = "modem_pic"; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + switch0port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch1port10 + &switch3port10 + &switch2port10>; + }; + }; + }; + }; + + mdio_mux_2: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + switch1: switch1@0 { + compatible = "marvell,mv88e6190"; + reg = <0>; + dsa,member = <0 1>; + eeprom-length = <65536>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "eth_cu_1000_3"; + }; + + port@2 { + reg = <2>; + label = "eth_cu_100_2"; + }; + + port@3 { + reg = <3>; + label = "eth_cu_100_3"; + }; + + switch1port9: port@9 { + reg = <9>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch3port10 + &switch2port10>; + }; + + switch1port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch0port10>; + }; + }; + }; + }; + + mdio_mux_4: mdio@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + switch2: switch2@0 { + compatible = "marvell,mv88e6190"; + reg = <0>; + dsa,member = <0 2>; + eeprom-length = <65536>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "internal_j9"; + }; + + port@2 { + reg = <2>; + label = "eth_fc_1000_2"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff1>; + }; + + port@3 { + reg = <3>; + label = "eth_fc_1000_3"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff2>; + }; + + port@4 { + reg = <4>; + label = "eth_fc_1000_4"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff3>; + }; + + port@5 { + reg = <5>; + label = "eth_fc_1000_5"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff4>; + }; + + port@6 { + reg = <6>; + label = "eth_fc_1000_6"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff5>; + }; + + port@7 { + reg = <7>; + label = "eth_fc_1000_7"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff6>; + }; + + port@9 { + reg = <9>; + label = "eth_fc_1000_1"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff0>; + }; + + switch2port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "2500base-x"; + link = <&switch3port9 + &switch1port9 + &switch0port10>; + }; + }; + }; + }; + + mdio_mux_8: mdio@8 { + reg = <8>; + #address-cells = <1>; + #size-cells = <0>; + + switch3: switch3@0 { + compatible = "marvell,mv88e6190"; + reg = <0>; + dsa,member = <0 3>; + eeprom-length = <65536>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "internal_j8"; + }; + + port@2 { + reg = <2>; + label = "eth_fc_1000_8"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff7>; + }; + + port@3 { + reg = <3>; + label = "eth_fc_1000_9"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff8>; + }; + + port@4 { + reg = <4>; + label = "eth_fc_1000_10"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff9>; + }; + + switch3port9: port@9 { + reg = <9>; + label = "dsa"; + phy-mode = "2500base-x"; + link = <&switch2port10>; + }; + + switch3port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch1port9 + &switch0port10>; + }; + }; + }; + }; + }; + + sff0: sff0 { + compatible = "sff,sff"; + i2c-bus = <&sff0_i2c>; + los-gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + }; + + sff1: sff1 { + compatible = "sff,sff"; + i2c-bus = <&sff1_i2c>; + los-gpios = <&gpio9 1 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + }; + + sff2: sff2 { + compatible = "sff,sff"; + i2c-bus = <&sff2_i2c>; + los-gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + }; + + sff3: sff3 { + compatible = "sff,sff"; + i2c-bus = <&sff3_i2c>; + los-gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; + }; + + sff4: sff4 { + compatible = "sff,sff"; + i2c-bus = <&sff4_i2c>; + los-gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + }; + + sff5: sff5 { + compatible = "sff,sff"; + i2c-bus = <&sff5_i2c>; + los-gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 5 GPIO_ACTIVE_HIGH>; + }; + + sff6: sff6 { + compatible = "sff,sff"; + i2c-bus = <&sff6_i2c>; + los-gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; + }; + + sff7: sff7 { + compatible = "sff,sff"; + i2c-bus = <&sff7_i2c>; + los-gpios = <&gpio9 7 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; + }; + + sff8: sff8 { + compatible = "sff,sff"; + i2c-bus = <&sff8_i2c>; + los-gpios = <&gpio9 8 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + }; + + sff9: sff9 { + compatible = "sff,sff"; + i2c-bus = <&sff9_i2c>; + los-gpios = <&gpio9 9 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; + }; + + reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&dspi0 { + pinctrl-0 = <&pinctrl_dspi0>; + pinctrl-names = "default"; + bus-num = <0>; + status = "okay"; + + adc@5 { + compatible = "holt,hi8435"; + reg = <5>; + gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; + spi-max-frequency = <1000000>; + }; +}; + +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-0"; + reg = <0x0 0x01000000>; + }; + }; + + spi-flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <1>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-1"; + reg = <0x0 0x01000000>; + }; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + non-removable; + no-1-8-v; + no-sd; + no-sdio; + keep-power-in-suspend; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + no-sdio; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + gpio5: pca9554@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio6: pca9554@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + + at24c04@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; + + ds1682@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + adt7411@4a { + compatible = "adi,adt7411"; + reg = <0x4a>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + gpio9: sx1503q@20 { + compatible = "semtech,sx1503q"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sx1503_20>; + #gpio-cells = <2>; + reg = <0x20>; + gpio-controller; + }; + + lm75@4e { + compatible = "national,lm75"; + reg = <0x4e>; + }; + + lm75@4f { + compatible = "national,lm75"; + reg = <0x4f>; + }; + + gpio7: pca9555@23 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x23>; + }; + + adt7411@4a { + compatible = "adi,adt7411"; + reg = <0x4a>; + }; + + at24c08@54 { + compatible = "atmel,24c08"; + reg = <0x54>; + }; + + tca9548@70 { + compatible = "nxp,pca9548"; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + sff0_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + sff1_i2c: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + sff2_i2c: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + sff3_i2c: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + sff4_i2c: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + }; + + tca9548@71 { + compatible = "nxp,pca9548"; + pinctrl-names = "default"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + + sff5_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + sff6_i2c: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + sff7_i2c: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + sff8_i2c: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + sff9_i2c: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + linux,rs485-enabled-at-boot-time; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + rs485-rts-delay = <0 200>; + status = "okay"; +}; + +&uart2 { + linux,rs485-enabled-at-boot-time; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + rs485-rts-delay = <0 200>; + status = "okay"; +}; + +&iomuxc { + pinctrl_dspi0: dspi0grp { + fsl,pins = < + VF610_PAD_PTB19__DSPI0_CS0 0x1182 + VF610_PAD_PTB18__DSPI0_CS1 0x1182 + VF610_PAD_PTB13__DSPI0_CS4 0x1182 + VF610_PAD_PTB12__DSPI0_CS5 0x1182 + VF610_PAD_PTB20__DSPI0_SIN 0x1181 + VF610_PAD_PTB21__DSPI0_SOUT 0x1182 + VF610_PAD_PTB22__DSPI0_SCK 0x1182 + >; + }; + + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTD4__DSPI1_CS1 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_dspi2: dspi2gpio { + fsl,pins = < + VF610_PAD_PTD30__GPIO_64 0x33e2 + VF610_PAD_PTD29__GPIO_65 0x33e1 + VF610_PAD_PTD28__GPIO_66 0x33e2 + VF610_PAD_PTD27__GPIO_67 0x33e2 + VF610_PAD_PTD26__GPIO_68 0x31c2 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + VF610_PAD_PTA22__I2C2_SCL 0x37ff + VF610_PAD_PTA23__I2C2_SDA 0x37ff + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + VF610_PAD_PTA30__I2C3_SCL 0x37ff + VF610_PAD_PTA31__I2C3_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTB26__GPIO_96 0x31c2 + >; + }; + + pinctrl_mdio_mux: pinctrl-mdio-mux { + fsl,pins = < + VF610_PAD_PTE27__GPIO_132 0x31c2 + VF610_PAD_PTE28__GPIO_133 0x31c2 + VF610_PAD_PTE21__GPIO_126 0x31c2 + VF610_PAD_PTE22__GPIO_127 0x31c2 + >; + }; + + pinctrl_qspi0: qspi0grp { + fsl,pins = < + VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3 + VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff + VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3 + VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3 + VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3 + VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3 + >; + }; + + pinctrl_sx1503_20: pinctrl-sx1503-20 { + fsl,pins = < + VF610_PAD_PTD31__GPIO_63 0x219d + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB23__UART1_TX 0x21a2 + VF610_PAD_PTB24__UART1_RX 0x21a1 + VF610_PAD_PTB25__UART1_RTS 0x21a2 /* Used as DE signal for the RS-485 transceiver */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD2__UART2_RTS 0x21a2 /* Used as DE signal for the RS-485 transceiver */ + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts index fe357668865b..757af56e8ee7 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts @@ -24,6 +24,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts index ca6249558760..d4bc0e3f2f11 100644 --- a/arch/arm/boot/dts/vf610m4-colibri.dts +++ b/arch/arm/boot/dts/vf610m4-colibri.dts @@ -55,6 +55,7 @@ }; memory@8c000000 { + device_type = "memory"; reg = <0x8c000000 0x3000000>; }; }; diff --git a/arch/arm/boot/dts/vf610m4.dtsi b/arch/arm/boot/dts/vf610m4.dtsi index 8293276b55a6..76bbfd5e32b6 100644 --- a/arch/arm/boot/dts/vf610m4.dtsi +++ b/arch/arm/boot/dts/vf610m4.dtsi @@ -50,7 +50,6 @@ #size-cells = <1>; chosen { }; aliases { }; - memory { device_type = "memory"; }; }; &mscm_ir { diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index e22507e23303..ca6425ad794c 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -219,7 +219,7 @@ #size-cells = <0>; }; - sdhci0: sdhci@e0100000 { + sdhci0: mmc@e0100000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; clock-names = "clk_xin", "clk_ahb"; @@ -229,7 +229,7 @@ reg = <0xe0100000 0x1000>; }; - sdhci1: sdhci@e0101000 { + sdhci1: mmc@e0101000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; clock-names = "clk_xin", "clk_ahb"; diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c index 50c5e8b5be3d..e3ef1da26d5e 100644 --- a/arch/arm/mach-mmp/mmp2-dt.c +++ b/arch/arm/mach-mmp/mmp2-dt.c @@ -31,7 +31,7 @@ static void __init mmp_init_time(void) } static const char *const mmp2_dt_board_compat[] __initconst = { - "mrvl,mmp2-brownstone", + "mrvl,mmp2", NULL, }; diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 8d4f97f279e0..0b0917111099 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb @@ -18,5 +19,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi index e5eae8bafc42..c3a618e1279a 100644 --- a/arch/arm64/boot/dts/allwinner/axp803.dtsi +++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi @@ -49,6 +49,39 @@ interrupt-controller; #interrupt-cells = <1>; + ac_power_supply: ac-power-supply { + compatible = "x-powers,axp803-ac-power-supply", + "x-powers,axp813-ac-power-supply"; + status = "disabled"; + }; + + axp_adc: adc { + compatible = "x-powers,axp803-adc", "x-powers,axp813-adc"; + #io-channel-cells = <1>; + }; + + axp_gpio: gpio { + compatible = "x-powers,axp803-gpio", "x-powers,axp813-gpio"; + gpio-controller; + #gpio-cells = <2>; + + gpio0_ldo: gpio0-ldo { + pins = "GPIO0"; + function = "ldo"; + }; + + gpio1_ldo: gpio1-ldo { + pins = "GPIO1"; + function = "ldo"; + }; + }; + + battery_power_supply: battery-power-supply { + compatible = "x-powers,axp803-battery-power-supply", + "x-powers,axp813-battery-power-supply"; + status = "disabled"; + }; + regulators { /* Default work frequency for buck regulators */ x-powers,dcdc-freq = <3000>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index ef1c90401bb2..9d0afd7d50ec 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -94,9 +94,24 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; +&codec { + status = "okay"; +}; + +&codec_analog { + hpvcc-supply = <®_eldo1>; + status = "okay"; +}; + +&dai { + status = "okay"; +}; + &de { status = "okay"; }; @@ -326,6 +341,22 @@ vcc-hdmi-supply = <®_dldo1>; }; +&sound { + status = "okay"; + simple-audio-card,widgets = "Headphone", "Headphone Jack", + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Headphone Jack", "HP", + "MIC2", "Microphone Jack", + "Onboard Microphone", "MBIAS", + "MIC1", "Onboard Microphone"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; @@ -335,7 +366,19 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_dldo2>; + vddio-supply = <®_dldo4>; + device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + }; }; &usb_otg { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index c077b6c1f458..216f2f5db5ef 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -75,6 +75,19 @@ }; }; +&codec { + status = "okay"; +}; + +&codec_analog { + hpvcc-supply = <®_eldo1>; + status = "okay"; +}; + +&dai { + status = "okay"; +}; + &de { status = "okay"; }; @@ -259,6 +272,20 @@ vcc-hdmi-supply = <®_dldo1>; }; +&sound { + simple-audio-card,aux-devs = <&codec_analog>; + simple-audio-card,widgets = "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "Headphone Jack", "HP", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "MIC2", "Microphone Jack"; + status = "okay"; +}; + /* On Euler connector */ &spdif { status = "disabled"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index 77fac84797e9..d22736a62481 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -22,12 +22,22 @@ ethernet0 = &rtl8723cs; }; + vdd_bl: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "bl-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + enable-active-high; + }; + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 50000 0>; brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>; default-brightness-level = <2>; enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ + power-supply = <&vdd_bl>; }; chosen { @@ -64,6 +74,32 @@ compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ }; + + speaker_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + /* + * TODO This is actually a fixed regulator controlled by + * the GPIO line on the PMIC. This should be corrected + * once GPIO support is added for this PMIC. + */ + VCC-supply = <®_ldo_io0>; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + sound-name-prefix = "Speaker Amp"; + }; + +}; + +&codec { + status = "okay"; +}; + +&codec_analog { + hpvcc-supply = <®_eldo1>; + status = "okay"; +}; + +&dai { + status = "okay"; }; &ehci0 { @@ -148,6 +184,14 @@ #include "axp803.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -267,6 +311,29 @@ vcc-hdmi-supply = <®_dldo1>; }; +&sound { + status = "okay"; + simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; + simple-audio-card,widgets = "Microphone", "Internal Microphone Left", + "Microphone", "Internal Microphone Right", + "Headphone", "Headphone Jack", + "Speaker", "Internal Speaker"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "Speaker Amp INL", "LINEOUT", + "Speaker Amp INR", "LINEOUT", + "Internal Speaker", "Speaker Amp OUTL", + "Internal Speaker", "Speaker Amp OUTR", + "Headphone Jack", "HP", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Internal Microphone Left", "MBIAS", + "MIC1", "Internal Microphone Left", + "Internal Microphone Right", "HBIAS", + "MIC2", "Internal Microphone Right"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index 53fcc9098df3..e6fb9683f213 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -80,6 +80,26 @@ }; }; +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&codec_analog { + status = "okay"; +}; + +&dai { + status = "okay"; +}; + &de { status = "okay"; }; @@ -164,6 +184,20 @@ vcc-hdmi-supply = <®_dldo1>; }; +&sound { + simple-audio-card,aux-devs = <&codec_analog>; + simple-audio-card,widgets = "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "Headphone Jack", "HP", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "MIC2", "Microphone Jack"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi index 6723b8695e0b..d2651f284aa0 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi @@ -47,6 +47,10 @@ #include <dt-bindings/gpio/gpio.h> +&codec_analog { + hpvcc-supply = <®_eldo1>; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index f3a66f888205..837a03dee875 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -139,15 +139,7 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - iosc: internal-osc-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <16000000>; - clock-accuracy = <300000000>; - clock-output-names = "iosc"; + clock-output-names = "ext-osc32k"; }; psci { @@ -155,6 +147,30 @@ method = "smc"; }; + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "sun50i-a64-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&cpudai>; + simple-audio-card,bitclock-master = <&cpudai>; + simple-audio-card,mclk-fs = <128>; + simple-audio-card,aux-devs = <&codec_analog>; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC"; + status = "disabled"; + + cpudai: simple-audio-card,cpu { + sound-dai = <&dai>; + }; + + link_codec: simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + sound_spdif { compatible = "simple-audio-card"; simple-audio-card,name = "On-board SPDIF"; @@ -277,6 +293,20 @@ reg = <0x0000 0x28000>; }; }; + + sram_c1: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0x40000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun50i-a64-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x40000>; + }; + }; }; dma: dma-controller@1c02000 { @@ -359,6 +389,17 @@ }; }; + video-codec@1c0e000 { + compatible = "allwinner,sun50i-h5-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_VE>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + allwinner,sram = <&ve_sram 1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun50i-a64-mmc"; reg = <0x01c0f000 0x1000>; @@ -490,7 +531,7 @@ ccu: clock@1c20000 { compatible = "allwinner,sun50i-a64-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -665,6 +706,30 @@ status = "disabled"; }; + dai: dai@1c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun50i-a64-codec-i2s"; + reg = <0x01c22c00 0x200>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_CODEC>; + reset-names = "rst"; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + codec: codec@1c22e00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-a33-codec"; + reg = <0x01c22e00 0x600>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "bus", "mod"; + status = "disabled"; + }; + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -807,6 +872,28 @@ }; }; + mali: gpu@1c40000 { + compatible = "allwinner,sun50i-a64-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pmu"; + clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_BUS_GPU>; + }; + gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, @@ -874,11 +961,12 @@ }; rtc: rtc@1f00000 { - compatible = "allwinner,sun6i-a31-rtc"; - reg = <0x01f00000 0x54>; + compatible = "allwinner,sun50i-a64-rtc", + "allwinner,sun8i-h3-rtc"; + reg = <0x01f00000 0x400>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - clock-output-names = "rtc-osc32k", "rtc-osc32k-out"; + clock-output-names = "osc32k", "osc32k-out", "iosc"; clocks = <&osc32k>; #clock-cells = <1>; }; @@ -895,13 +983,18 @@ r_ccu: clock@1f01400 { compatible = "allwinner,sun50i-a64-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&osc32k>, <&iosc>, - <&ccu 11>; + clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 11>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; }; + codec_analog: codec-analog@1f015c0 { + compatible = "allwinner,sun50i-a64-codec-analog"; + reg = <0x01f015c0 0x4>; + status = "disabled"; + }; + r_i2c: i2c@1f02400 { compatible = "allwinner,sun50i-a64-i2c", "allwinner,sun6i-a31-i2c"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts new file mode 100644 index 000000000000..85e7993a74e7 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * DTS for Emlid Neutis N5 Dev board. + * + * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> + */ + +/dts-v1/; + +#include "sun50i-h5-emlid-neutis-n5.dtsi" + +/ { + model = "Emlid Neutis N5 Developer board"; + compatible = "emlid,neutis-n5-devboard", + "emlid,neutis-n5", + "allwinner,sun50i-h5"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + reg_usb0_vbus: usb0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + status = "okay"; + }; + + vdd_cpux: gpio-regulator { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; /* 4ms */ + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + gpios-states = <0x1>; + states = <1100000 0x0 + 1300000 0x1>; + }; +}; + +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "LINEIN", "Line In", + "MIC1", "Mic", + "MIC2", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi new file mode 100644 index 000000000000..e4d50373c8ef --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * DTSI for Emlid Neutis N5 SoM. + * + * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> + */ + +/dts-v1/; + +#include "sun50i-h5.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ + post-power-on-delay-ms = <200>; + }; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index b41dc1aab67d..c22621b4b8e9 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -94,6 +94,39 @@ }; soc { + syscon: system-control@1c00000 { + compatible = "allwinner,sun50i-h5-system-control"; + reg = <0x01c00000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c1: sram@18000 { + compatible = "mmio-sram"; + reg = <0x00018000 0x1c000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00018000 0x1c000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun50i-h5-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x1c000>; + }; + }; + }; + + video-codec@1c0e000 { + compatible = "allwinner,sun50i-h5-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_VE>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + allwinner,sram = <&ve_sram 1>; + }; + mali: gpu@1e80000 { compatible = "allwinner,sun50i-h5-mali", "arm,mali-450"; reg = <0x01e80000 0x30000>; @@ -172,3 +205,7 @@ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; compatible = "allwinner,sun50i-h5-pinctrl"; }; + +&rtc { + compatible = "allwinner,sun50i-h5-rtc"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts new file mode 100644 index 000000000000..e098a2475f2d --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2018 Jagan Teki <jagan@openedev.com> + */ + +#include "sun50i-h6-orangepi.dtsi" + +/ { + model = "OrangePi Lite2"; + compatible = "xunlong,orangepi-lite2", "allwinner,sun50i-h6"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts index 0612c19cd994..12e17567ab56 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts @@ -4,147 +4,9 @@ * Author: Jagan Teki <jagan@amarulasolutions.com> */ -/dts-v1/; - -#include "sun50i-h6.dtsi" - -#include <dt-bindings/gpio/gpio.h> +#include "sun50i-h6-orangepi.dtsi" / { model = "OrangePi One Plus"; compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <®_cldo1>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; - bus-width = <4>; - status = "okay"; -}; - -&r_i2c { - status = "okay"; - - axp805: pmic@36 { - compatible = "x-powers,axp805", "x-powers,axp806"; - reg = <0x36>; - interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <1>; - x-powers,self-working-mode; - - regulators { - reg_aldo1: aldo1 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-pl"; - }; - - reg_aldo2: aldo2 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-ac200"; - }; - - reg_aldo3: aldo3 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc25-dram"; - }; - - reg_bldo1: bldo1 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc-bias-pll"; - }; - - reg_bldo2: bldo2 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc-efuse-pcie-hdmi-io"; - }; - - reg_bldo3: bldo3 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc-dcxoio"; - }; - - bldo4 { - /* unused */ - }; - - reg_cldo1: cldo1 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-3v3"; - }; - - reg_cldo2: cldo2 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi-1"; - }; - - reg_cldo3: cldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi-2"; - }; - - reg_dcdca: dcdca { - regulator-always-on; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <1080000>; - regulator-name = "vdd-cpu"; - }; - - reg_dcdcc: dcdcc { - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <1080000>; - regulator-name = "vdd-gpu"; - }; - - reg_dcdcd: dcdcd { - regulator-always-on; - regulator-min-microvolt = <960000>; - regulator-max-microvolt = <960000>; - regulator-name = "vdd-sys"; - }; - - reg_dcdce: dcdce { - regulator-always-on; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-name = "vcc-dram"; - }; - - sw { - /* unused */ - }; - }; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_ph_pins>; - status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi new file mode 100644 index 000000000000..b2526dac2fcf --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi @@ -0,0 +1,210 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2018 Amarula Solutions + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +/dts-v1/; + +#include "sun50i-h6.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "OrangePi One Plus"; + compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "orangepi:red:power"; + gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + default-state = "on"; + }; + + status { + label = "orangepi:green:status"; + gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + }; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the DC jack */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_cldo1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&r_i2c { + status = "okay"; + + axp805: pmic@36 { + compatible = "x-powers,axp805", "x-powers,axp806"; + reg = <0x36>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + x-powers,self-working-mode; + vina-supply = <®_vcc5v>; + vinb-supply = <®_vcc5v>; + vinc-supply = <®_vcc5v>; + vind-supply = <®_vcc5v>; + vine-supply = <®_vcc5v>; + aldoin-supply = <®_vcc5v>; + bldoin-supply = <®_vcc5v>; + cldoin-supply = <®_vcc5v>; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ac200"; + }; + + reg_aldo3: aldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc25-dram"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-bias-pll"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-efuse-pcie-hdmi-io"; + }; + + reg_bldo3: bldo3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dcxoio"; + }; + + bldo4 { + /* unused */ + }; + + reg_cldo1: cldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; + }; + + reg_cldo2: cldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-1"; + }; + + reg_cldo3: cldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdcc: dcdcc { + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <960000>; + regulator-max-microvolt = <960000>; + regulator-name = "vdd-sys"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; + }; + + sw { + /* unused */ + }; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +&usb2otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb2phy { + usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */ + usb0_vbus-supply = <®_vcc5v>; + usb3_vbus-supply = <®_vcc5v>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index 48daec7f78ba..bdb8470fc8dc 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -14,6 +14,7 @@ compatible = "pine64,pine-h64", "allwinner,sun50i-h6"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -21,6 +22,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -39,6 +51,56 @@ gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ }; }; + + reg_usb_vbus: vbus { + compatible = "regulator-fixed"; + regulator-name = "usb-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <100000>; + gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&ext_rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_aldo2>; + allwinner,rx-delay-ps = <200>; + allwinner,tx-delay-ps = <200>; + status = "okay"; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&de { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; }; &mmc0 { @@ -61,6 +123,14 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + &r_i2c { status = "okay"; @@ -85,6 +155,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-ac200"; + regulator-enable-ramp-delay = <100000>; }; reg_aldo3: aldo3 { @@ -185,3 +256,14 @@ pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; + +&usb2otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb2phy { + usb0_vbus-supply = <®_usb_vbus>; + usb3_vbus-supply = <®_usb_vbus>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 040828d2e2c0..d93a7add67e7 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -6,8 +6,11 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun50i-h6-ccu.h> #include <dt-bindings/clock/sun50i-h6-r-ccu.h> +#include <dt-bindings/clock/sun8i-de2.h> +#include <dt-bindings/clock/sun8i-tcon-top.h> #include <dt-bindings/reset/sun50i-h6-ccu.h> #include <dt-bindings/reset/sun50i-h6-r-ccu.h> +#include <dt-bindings/reset/sun8i-de2.h> / { interrupt-parent = <&gic>; @@ -47,6 +50,12 @@ }; }; + de: display-engine { + compatible = "allwinner,sun50i-h6-display-engine"; + allwinner,pipelines = <&mixer0>; + status = "disabled"; + }; + iosc: internal-osc-clk { #clock-cells = <0>; compatible = "fixed-clock"; @@ -92,6 +101,51 @@ #size-cells = <1>; ranges; + display-engine@1000000 { + compatible = "allwinner,sun50i-h6-de3", + "allwinner,sun50i-a64-de2"; + reg = <0x1000000 0x400000>; + allwinner,sram = <&de2_sram 1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000000 0x400000>; + + display_clocks: clock@0 { + compatible = "allwinner,sun50i-h6-de3-clk"; + reg = <0x0 0x10000>; + clocks = <&ccu CLK_DE>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + mixer0: mixer@100000 { + compatible = "allwinner,sun50i-h6-de3-mixer-0"; + reg = <0x100000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER0>, + <&display_clocks CLK_MIXER0>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_MIXER0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + reg = <1>; + + mixer0_out_tcon_top_mixer0: endpoint { + remote-endpoint = <&tcon_top_mixer0_in_mixer0>; + }; + }; + }; + }; + }; + syscon: syscon@3000000 { compatible = "allwinner,sun50i-h6-system-control", "allwinner,sun50i-a64-system-control"; @@ -149,6 +203,19 @@ interrupt-controller; #interrupt-cells = <3>; + ext_rgmii_pins: rgmii_pins { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", + "PD5", "PD7", "PD8", "PD9", "PD10", + "PD11", "PD12", "PD13", "PD19", "PD20"; + function = "emac"; + drive-strength = <40>; + }; + + hdmi_pins: hdmi-pins { + pins = "PH8", "PH9", "PH10"; + function = "hdmi"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -258,6 +325,250 @@ status = "disabled"; }; + emac: ethernet@5020000 { + compatible = "allwinner,sun50i-h6-emac", + "allwinner,sun50i-a64-emac"; + syscon = <&syscon>; + reg = <0x05020000 0x10000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + status = "disabled"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + usb2otg: usb@5100000 { + compatible = "allwinner,sun50i-h6-musb", + "allwinner,sun8i-a33-musb"; + reg = <0x05100000 0x0400>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + phys = <&usb2phy 0>; + phy-names = "usb"; + extcon = <&usb2phy 0>; + status = "disabled"; + }; + + usb2phy: phy@5100400 { + compatible = "allwinner,sun50i-h6-usb-phy"; + reg = <0x05100400 0x24>, + <0x05101800 0x4>, + <0x05311800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu3"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY3>; + clock-names = "usb0_phy", + "usb3_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY3>; + reset-names = "usb0_reset", + "usb3_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci0: usb@5101000 { + compatible = "allwinner,sun50i-h6-ehci", "generic-ehci"; + reg = <0x05101000 0x100>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI0>, + <&ccu CLK_BUS_EHCI0>, + <&ccu CLK_USB_OHCI0>; + resets = <&ccu RST_BUS_OHCI0>, + <&ccu RST_BUS_EHCI0>; + status = "disabled"; + }; + + ohci0: usb@5101400 { + compatible = "allwinner,sun50i-h6-ohci", "generic-ohci"; + reg = <0x05101400 0x100>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI0>, + <&ccu CLK_USB_OHCI0>; + resets = <&ccu RST_BUS_OHCI0>; + status = "disabled"; + }; + + ehci3: usb@5311000 { + compatible = "allwinner,sun50i-h6-ehci", "generic-ehci"; + reg = <0x05311000 0x100>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI3>, + <&ccu CLK_BUS_EHCI3>, + <&ccu CLK_USB_OHCI3>; + resets = <&ccu RST_BUS_OHCI3>, + <&ccu RST_BUS_EHCI3>; + phys = <&usb2phy 3>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci3: usb@5311400 { + compatible = "allwinner,sun50i-h6-ohci", "generic-ohci"; + reg = <0x05311400 0x100>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI3>, + <&ccu CLK_USB_OHCI3>; + resets = <&ccu RST_BUS_OHCI3>; + phys = <&usb2phy 3>; + phy-names = "usb"; + status = "disabled"; + }; + + hdmi: hdmi@6000000 { + compatible = "allwinner,sun50i-h6-dw-hdmi"; + reg = <0x06000000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>, + <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>, + <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>; + clock-names = "iahb", "isfr", "tmds", "cec", "hdcp", + "hdcp-bus"; + resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>; + reset-names = "ctrl", "hdcp"; + phys = <&hdmi_phy>; + phy-names = "hdmi-phy"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + + hdmi_in_tcon_top: endpoint { + remote-endpoint = <&tcon_top_hdmi_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + + hdmi_phy: hdmi-phy@6010000 { + compatible = "allwinner,sun50i-h6-hdmi-phy"; + reg = <0x06010000 0x10000>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_HDMI>; + reset-names = "phy"; + #phy-cells = <0>; + }; + + tcon_top: tcon-top@6510000 { + compatible = "allwinner,sun50i-h6-tcon-top"; + reg = <0x06510000 0x1000>; + clocks = <&ccu CLK_BUS_TCON_TOP>, + <&ccu CLK_TCON_TV0>; + clock-names = "bus", + "tcon-tv0"; + clock-output-names = "tcon-top-tv0"; + resets = <&ccu RST_BUS_TCON_TOP>; + reset-names = "rst"; + #clock-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_top_mixer0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon_top_mixer0_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon_top_mixer0>; + }; + }; + + tcon_top_mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_top_mixer0_out_tcon_tv: endpoint@2 { + reg = <2>; + remote-endpoint = <&tcon_tv_in_tcon_top_mixer0>; + }; + }; + + tcon_top_hdmi_in: port@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + tcon_top_hdmi_in_tcon_tv: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_tv_out_tcon_top>; + }; + }; + + tcon_top_hdmi_out: port@5 { + reg = <5>; + + tcon_top_hdmi_out_hdmi: endpoint { + remote-endpoint = <&hdmi_in_tcon_top>; + }; + }; + }; + }; + + tcon_tv: lcd-controller@6515000 { + compatible = "allwinner,sun50i-h6-tcon-tv", + "allwinner,sun8i-r40-tcon-tv"; + reg = <0x06515000 0x1000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON_TV0>, + <&tcon_top CLK_TCON_TOP_TV0>; + clock-names = "ahb", + "tcon-ch1"; + resets = <&ccu RST_BUS_TCON_TV0>; + reset-names = "lcd"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_tv_in: port@0 { + reg = <0>; + + tcon_tv_in_tcon_top_mixer0: endpoint { + remote-endpoint = <&tcon_top_mixer0_out_tcon_tv>; + }; + }; + + tcon_tv_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_tv_out_tcon_top: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_hdmi_in_tcon_tv>; + }; + }; + }; + }; + r_ccu: clock@7010000 { compatible = "allwinner,sun50i-h6-r-ccu"; reg = <0x07010000 0x400>; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index a20df0d9c96d..b2c9bb664595 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -332,9 +332,8 @@ rst: rstmgr@ffd11000 { #reset-cells = <1>; - compatible = "altr,rst-mgr"; + compatible = "altr,stratix10-rst-mgr"; reg = <0xffd11000 0x1000>; - altr,modrst-offset = <0x20>; }; spi0: spi@ffda4000 { diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index c31f29d660de..f12efa27c636 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-libretech-ac.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb @@ -18,6 +19,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index 18778ada7bd3..824eba98db2c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -60,7 +60,7 @@ serial1 = &uart_A; }; - linein: audio-codec@0 { + linein: audio-codec-0 { #sound-dai-cells = <0>; compatible = "everest,es7241"; VDDA-supply = <&vcc_3v3>; @@ -70,7 +70,7 @@ sound-name-prefix = "Linein"; }; - lineout: audio-codec@1 { + lineout: audio-codec-1 { #sound-dai-cells = <0>; compatible = "everest,es7154"; VDD-supply = <&vcc_3v3>; @@ -79,14 +79,14 @@ sound-name-prefix = "Lineout"; }; - spdif_dit: audio-codec@2 { + spdif_dit: audio-codec-2 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; status = "okay"; sound-name-prefix = "DIT"; }; - dmics: audio-codec@3 { + dmics: audio-codec-3 { #sound-dai-cells = <0>; compatible = "dmic-codec"; num-channels = <7>; @@ -272,31 +272,31 @@ <393216000>; status = "okay"; - dai-link@0 { + dai-link-0 { sound-dai = <&frddr_a>; }; - dai-link@1 { + dai-link-1 { sound-dai = <&frddr_b>; }; - dai-link@2 { + dai-link-2 { sound-dai = <&frddr_c>; }; - dai-link@3 { + dai-link-3 { sound-dai = <&toddr_a>; }; - dai-link@4 { + dai-link-4 { sound-dai = <&toddr_b>; }; - dai-link@5 { + dai-link-5 { sound-dai = <&toddr_c>; }; - dai-link@6 { + dai-link-6 { sound-dai = <&tdmif_c>; dai-format = "i2s"; dai-tdm-slot-tx-mask-2 = <1 1>; @@ -317,7 +317,7 @@ }; - dai-link@7 { + dai-link-7 { sound-dai = <&spdifout>; codec { @@ -325,7 +325,7 @@ }; }; - dai-link@8 { + dai-link-8 { sound-dai = <&pdm>; codec { @@ -357,6 +357,8 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + interrupt-parent = <&gpio_intc>; + interrupts = <98 IRQ_TYPE_LEVEL_LOW>; eee-broken-1000t; }; }; @@ -543,8 +545,14 @@ &uart_A { status = "okay"; - pinctrl-0 = <&uart_a_pins>; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>; + }; }; &uart_AO { diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index df017dbd2e57..fffd55787981 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -20,7 +20,7 @@ #address-cells = <2>; #size-cells = <2>; - tdmif_a: audio-controller@0 { + tdmif_a: audio-controller-0 { compatible = "amlogic,axg-tdm-iface"; #sound-dai-cells = <0>; sound-name-prefix = "TDM_A"; @@ -31,7 +31,7 @@ status = "disabled"; }; - tdmif_b: audio-controller@1 { + tdmif_b: audio-controller-1 { compatible = "amlogic,axg-tdm-iface"; #sound-dai-cells = <0>; sound-name-prefix = "TDM_B"; @@ -42,7 +42,7 @@ status = "disabled"; }; - tdmif_c: audio-controller@2 { + tdmif_c: audio-controller-2 { compatible = "amlogic,axg-tdm-iface"; #sound-dai-cells = <0>; sound-name-prefix = "TDM_C"; @@ -53,13 +53,6 @@ status = "disabled"; }; - ao_alt_xtal: ao_alt_xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <32000000>; - clock-output-names = "ao_alt_xtal"; - #clock-cells = <0>; - }; - arm-pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, @@ -79,6 +72,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; + clocks = <&scpi_dvfs 0>; }; cpu1: cpu@1 { @@ -87,6 +81,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; + clocks = <&scpi_dvfs 0>; }; cpu2: cpu@2 { @@ -95,6 +90,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&l2>; + clocks = <&scpi_dvfs 0>; }; cpu3: cpu@3 { @@ -103,6 +99,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&l2>; + clocks = <&scpi_dvfs 0>; }; l2: l2-cache0 { @@ -110,6 +107,10 @@ }; }; + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -133,6 +134,28 @@ }; }; + scpi { + compatible = "arm,scpi-pre-1.0"; + mboxes = <&mailbox 1 &mailbox 2>; + shmem = <&cpu_scp_lpri &cpu_scp_hpri>; + + scpi_clocks: clocks { + compatible = "arm,scpi-clocks"; + + scpi_dvfs: clock-controller { + compatible = "arm,scpi-dvfs-clocks"; + #clock-cells = <1>; + clock-indices = <0>; + clock-output-names = "vcpu"; + }; + }; + + scpi_sensors: sensors { + compatible = "amlogic,meson-gxbb-scpi-sensors"; + #thermal-sensor-cells = <1>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -143,7 +166,7 @@ compatible = "amlogic,meson-axg-dwmac", "snps,dwmac"; reg = <0x0 0xff3f0000 0x0 0x10000 0x0 0xff634540 0x0 0x8>; - interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, @@ -200,6 +223,7 @@ groups = "i2c0_sck", "i2c0_sda"; function = "i2c0"; + bias-disable; }; }; @@ -208,6 +232,7 @@ groups = "i2c1_sck_x", "i2c1_sda_x"; function = "i2c1"; + bias-disable; }; }; @@ -216,6 +241,7 @@ groups = "i2c1_sck_z", "i2c1_sda_z"; function = "i2c1"; + bias-disable; }; }; @@ -224,6 +250,7 @@ groups = "i2c2_sck_a", "i2c2_sda_a"; function = "i2c2"; + bias-disable; }; }; @@ -232,6 +259,7 @@ groups = "i2c2_sck_x", "i2c2_sda_x"; function = "i2c2"; + bias-disable; }; }; @@ -240,6 +268,7 @@ groups = "i2c3_sda_a6", "i2c3_sck_a7"; function = "i2c3"; + bias-disable; }; }; @@ -248,6 +277,7 @@ groups = "i2c3_sda_a12", "i2c3_sck_a13"; function = "i2c3"; + bias-disable; }; }; @@ -256,6 +286,7 @@ groups = "i2c3_sda_a19", "i2c3_sck_a20"; function = "i2c3"; + bias-disable; }; }; @@ -273,6 +304,7 @@ "emmc_cmd", "emmc_ds"; function = "emmc"; + bias-disable; }; }; @@ -280,9 +312,6 @@ mux { groups = "BOOT_8"; function = "gpio_periphs"; - }; - cfg-pull-down { - pins = "BOOT_8"; bias-pull-down; }; }; @@ -304,6 +333,7 @@ "eth_txd2_rgmii", "eth_txd3_rgmii"; function = "eth"; + bias-disable; }; }; @@ -324,6 +354,7 @@ "eth_txd2_rgmii", "eth_txd3_rgmii"; function = "eth"; + bias-disable; }; }; @@ -339,6 +370,7 @@ "eth_txd0_x", "eth_txd1_x"; function = "eth"; + bias-disable; }; }; @@ -354,6 +386,7 @@ "eth_txd0_y", "eth_txd1_y"; function = "eth"; + bias-disable; }; }; @@ -361,6 +394,7 @@ mux { groups = "mclk_b"; function = "mclk_b"; + bias-disable; }; }; @@ -368,6 +402,7 @@ mux { groups = "mclk_c"; function = "mclk_c"; + bias-disable; }; }; @@ -375,6 +410,7 @@ mux { groups = "pdm_dclk_a14"; function = "pdm"; + bias-disable; }; }; @@ -382,6 +418,7 @@ mux { groups = "pdm_dclk_a19"; function = "pdm"; + bias-disable; }; }; @@ -389,6 +426,7 @@ mux { groups = "pdm_din0"; function = "pdm"; + bias-disable; }; }; @@ -396,6 +434,7 @@ mux { groups = "pdm_din1"; function = "pdm"; + bias-disable; }; }; @@ -403,6 +442,7 @@ mux { groups = "pdm_din2"; function = "pdm"; + bias-disable; }; }; @@ -410,6 +450,7 @@ mux { groups = "pdm_din3"; function = "pdm"; + bias-disable; }; }; @@ -417,6 +458,7 @@ mux { groups = "pwm_a_a"; function = "pwm_a"; + bias-disable; }; }; @@ -424,6 +466,7 @@ mux { groups = "pwm_a_x18"; function = "pwm_a"; + bias-disable; }; }; @@ -431,6 +474,7 @@ mux { groups = "pwm_a_x20"; function = "pwm_a"; + bias-disable; }; }; @@ -438,6 +482,7 @@ mux { groups = "pwm_a_z"; function = "pwm_a"; + bias-disable; }; }; @@ -445,6 +490,7 @@ mux { groups = "pwm_b_a"; function = "pwm_b"; + bias-disable; }; }; @@ -452,6 +498,7 @@ mux { groups = "pwm_b_x"; function = "pwm_b"; + bias-disable; }; }; @@ -459,6 +506,7 @@ mux { groups = "pwm_b_z"; function = "pwm_b"; + bias-disable; }; }; @@ -466,6 +514,7 @@ mux { groups = "pwm_c_a"; function = "pwm_c"; + bias-disable; }; }; @@ -473,6 +522,7 @@ mux { groups = "pwm_c_x10"; function = "pwm_c"; + bias-disable; }; }; @@ -480,6 +530,7 @@ mux { groups = "pwm_c_x17"; function = "pwm_c"; + bias-disable; }; }; @@ -487,6 +538,7 @@ mux { groups = "pwm_d_x11"; function = "pwm_d"; + bias-disable; }; }; @@ -494,6 +546,7 @@ mux { groups = "pwm_d_x16"; function = "pwm_d"; + bias-disable; }; }; @@ -506,6 +559,7 @@ "sdio_cmd", "sdio_clk"; function = "sdio"; + bias-disable; }; }; @@ -513,9 +567,6 @@ mux { groups = "GPIOX_4"; function = "gpio_periphs"; - }; - cfg-pull-down { - pins = "GPIOX_4"; bias-pull-down; }; }; @@ -524,6 +575,7 @@ mux { groups = "spdif_in_z"; function = "spdif_in"; + bias-disable; }; }; @@ -531,6 +583,7 @@ mux { groups = "spdif_in_a1"; function = "spdif_in"; + bias-disable; }; }; @@ -538,6 +591,7 @@ mux { groups = "spdif_in_a7"; function = "spdif_in"; + bias-disable; }; }; @@ -545,6 +599,7 @@ mux { groups = "spdif_in_a19"; function = "spdif_in"; + bias-disable; }; }; @@ -552,6 +607,7 @@ mux { groups = "spdif_in_a20"; function = "spdif_in"; + bias-disable; }; }; @@ -559,6 +615,7 @@ mux { groups = "spdif_out_a1"; function = "spdif_out"; + bias-disable; }; }; @@ -566,6 +623,7 @@ mux { groups = "spdif_out_a11"; function = "spdif_out"; + bias-disable; }; }; @@ -573,6 +631,7 @@ mux { groups = "spdif_out_a19"; function = "spdif_out"; + bias-disable; }; }; @@ -580,6 +639,7 @@ mux { groups = "spdif_out_a20"; function = "spdif_out"; + bias-disable; }; }; @@ -587,6 +647,7 @@ mux { groups = "spdif_out_z"; function = "spdif_out"; + bias-disable; }; }; @@ -596,6 +657,7 @@ "spi0_mosi", "spi0_clk"; function = "spi0"; + bias-disable; }; }; @@ -603,6 +665,7 @@ mux { groups = "spi0_ss0"; function = "spi0"; + bias-disable; }; }; @@ -610,6 +673,7 @@ mux { groups = "spi0_ss1"; function = "spi0"; + bias-disable; }; }; @@ -617,6 +681,7 @@ mux { groups = "spi0_ss2"; function = "spi0"; + bias-disable; }; }; @@ -626,6 +691,7 @@ "spi1_mosi_a", "spi1_clk_a"; function = "spi1"; + bias-disable; }; }; @@ -633,6 +699,7 @@ mux { groups = "spi1_ss0_a"; function = "spi1"; + bias-disable; }; }; @@ -640,6 +707,7 @@ mux { groups = "spi1_ss1"; function = "spi1"; + bias-disable; }; }; @@ -649,6 +717,7 @@ "spi1_mosi_x", "spi1_clk_x"; function = "spi1"; + bias-disable; }; }; @@ -656,6 +725,7 @@ mux { groups = "spi1_ss0_x"; function = "spi1"; + bias-disable; }; }; @@ -663,6 +733,7 @@ mux { groups = "tdma_din0"; function = "tdma"; + bias-disable; }; }; @@ -670,6 +741,7 @@ mux { groups = "tdma_dout0_x14"; function = "tdma"; + bias-disable; }; }; @@ -677,6 +749,7 @@ mux { groups = "tdma_dout0_x15"; function = "tdma"; + bias-disable; }; }; @@ -684,6 +757,7 @@ mux { groups = "tdma_dout1"; function = "tdma"; + bias-disable; }; }; @@ -691,6 +765,7 @@ mux { groups = "tdma_din1"; function = "tdma"; + bias-disable; }; }; @@ -698,6 +773,7 @@ mux { groups = "tdma_fs"; function = "tdma"; + bias-disable; }; }; @@ -705,6 +781,7 @@ mux { groups = "tdma_fs_slv"; function = "tdma"; + bias-disable; }; }; @@ -712,6 +789,7 @@ mux { groups = "tdma_sclk"; function = "tdma"; + bias-disable; }; }; @@ -719,6 +797,7 @@ mux { groups = "tdma_sclk_slv"; function = "tdma"; + bias-disable; }; }; @@ -726,6 +805,7 @@ mux { groups = "tdmb_din0"; function = "tdmb"; + bias-disable; }; }; @@ -733,6 +813,7 @@ mux { groups = "tdmb_din1"; function = "tdmb"; + bias-disable; }; }; @@ -740,6 +821,7 @@ mux { groups = "tdmb_din2"; function = "tdmb"; + bias-disable; }; }; @@ -747,6 +829,7 @@ mux { groups = "tdmb_din3"; function = "tdmb"; + bias-disable; }; }; @@ -754,6 +837,7 @@ mux { groups = "tdmb_dout0"; function = "tdmb"; + bias-disable; }; }; @@ -761,6 +845,7 @@ mux { groups = "tdmb_dout1"; function = "tdmb"; + bias-disable; }; }; @@ -768,6 +853,7 @@ mux { groups = "tdmb_dout2"; function = "tdmb"; + bias-disable; }; }; @@ -775,6 +861,7 @@ mux { groups = "tdmb_dout3"; function = "tdmb"; + bias-disable; }; }; @@ -782,6 +869,7 @@ mux { groups = "tdmb_fs"; function = "tdmb"; + bias-disable; }; }; @@ -789,6 +877,7 @@ mux { groups = "tdmb_fs_slv"; function = "tdmb"; + bias-disable; }; }; @@ -796,6 +885,7 @@ mux { groups = "tdmb_sclk"; function = "tdmb"; + bias-disable; }; }; @@ -803,6 +893,7 @@ mux { groups = "tdmb_sclk_slv"; function = "tdmb"; + bias-disable; }; }; @@ -810,6 +901,7 @@ mux { groups = "tdmc_fs"; function = "tdmc"; + bias-disable; }; }; @@ -817,6 +909,7 @@ mux { groups = "tdmc_fs_slv"; function = "tdmc"; + bias-disable; }; }; @@ -824,6 +917,7 @@ mux { groups = "tdmc_sclk"; function = "tdmc"; + bias-disable; }; }; @@ -831,6 +925,7 @@ mux { groups = "tdmc_sclk_slv"; function = "tdmc"; + bias-disable; }; }; @@ -838,6 +933,7 @@ mux { groups = "tdmc_din0"; function = "tdmc"; + bias-disable; }; }; @@ -845,6 +941,7 @@ mux { groups = "tdmc_din1"; function = "tdmc"; + bias-disable; }; }; @@ -852,6 +949,7 @@ mux { groups = "tdmc_din2"; function = "tdmc"; + bias-disable; }; }; @@ -859,6 +957,7 @@ mux { groups = "tdmc_din3"; function = "tdmc"; + bias-disable; }; }; @@ -866,6 +965,7 @@ mux { groups = "tdmc_dout0"; function = "tdmc"; + bias-disable; }; }; @@ -873,6 +973,7 @@ mux { groups = "tdmc_dout1"; function = "tdmc"; + bias-disable; }; }; @@ -880,6 +981,7 @@ mux { groups = "tdmc_dout2"; function = "tdmc"; + bias-disable; }; }; @@ -887,6 +989,7 @@ mux { groups = "tdmc_dout3"; function = "tdmc"; + bias-disable; }; }; @@ -895,6 +998,7 @@ groups = "uart_tx_a", "uart_rx_a"; function = "uart_a"; + bias-disable; }; }; @@ -903,6 +1007,7 @@ groups = "uart_cts_a", "uart_rts_a"; function = "uart_a"; + bias-disable; }; }; @@ -911,6 +1016,7 @@ groups = "uart_tx_b_x", "uart_rx_b_x"; function = "uart_b"; + bias-disable; }; }; @@ -919,6 +1025,7 @@ groups = "uart_cts_b_x", "uart_rts_b_x"; function = "uart_b"; + bias-disable; }; }; @@ -927,6 +1034,7 @@ groups = "uart_tx_b_z", "uart_rx_b_z"; function = "uart_b"; + bias-disable; }; }; @@ -935,6 +1043,7 @@ groups = "uart_cts_b_z", "uart_rts_b_z"; function = "uart_b"; + bias-disable; }; }; @@ -943,6 +1052,7 @@ groups = "uart_ao_tx_b_z", "uart_ao_rx_b_z"; function = "uart_ao_b_z"; + bias-disable; }; }; @@ -951,6 +1061,7 @@ groups = "uart_ao_cts_b_z", "uart_ao_rts_b_z"; function = "uart_ao_b_z"; + bias-disable; }; }; }; @@ -971,13 +1082,15 @@ clkc: clock-controller { compatible = "amlogic,axg-clkc"; #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "xtal"; }; }; }; - mailbox: mailbox@ff63dc00 { + mailbox: mailbox@ff63c404 { compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; - reg = <0 0xff63dc00 0 0x400>; + reg = <0 0xff63c404 0 0x4c>; interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>; @@ -1216,6 +1329,8 @@ compatible = "amlogic,meson-axg-aoclkc"; #clock-cells = <1>; #reset-cells = <1>; + clocks = <&xtal>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "mpeg-clk"; }; }; @@ -1239,6 +1354,7 @@ mux { groups = "i2c_ao_sck_4"; function = "i2c_ao"; + bias-disable; }; }; @@ -1246,6 +1362,7 @@ mux { groups = "i2c_ao_sck_8"; function = "i2c_ao"; + bias-disable; }; }; @@ -1253,6 +1370,7 @@ mux { groups = "i2c_ao_sck_10"; function = "i2c_ao"; + bias-disable; }; }; @@ -1260,6 +1378,7 @@ mux { groups = "i2c_ao_sda_5"; function = "i2c_ao"; + bias-disable; }; }; @@ -1267,6 +1386,7 @@ mux { groups = "i2c_ao_sda_9"; function = "i2c_ao"; + bias-disable; }; }; @@ -1274,6 +1394,7 @@ mux { groups = "i2c_ao_sda_11"; function = "i2c_ao"; + bias-disable; }; }; @@ -1281,6 +1402,7 @@ mux { groups = "remote_input_ao"; function = "remote_input_ao"; + bias-disable; }; }; @@ -1289,6 +1411,7 @@ groups = "uart_ao_tx_a", "uart_ao_rx_a"; function = "uart_ao_a"; + bias-disable; }; }; @@ -1297,6 +1420,7 @@ groups = "uart_ao_cts_a", "uart_ao_rts_a"; function = "uart_ao_a"; + bias-disable; }; }; @@ -1305,6 +1429,7 @@ groups = "uart_ao_tx_b", "uart_ao_rx_b"; function = "uart_ao_b"; + bias-disable; }; }; @@ -1313,6 +1438,7 @@ groups = "uart_ao_cts_b", "uart_ao_rts_b"; function = "uart_ao_b"; + bias-disable; }; }; }; @@ -1414,12 +1540,18 @@ }; gpio_intc: interrupt-controller@f080 { - compatible = "amlogic,meson-gpio-intc"; + compatible = "amlogic,meson-axg-gpio-intc", + "amlogic,meson-gpio-intc"; reg = <0x0 0xf080 0x0 0x10>; interrupt-controller; #interrupt-cells = <2>; amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; - status = "disabled"; + }; + + watchdog@f0d0 { + compatible = "amlogic,meson-gxbb-wdt"; + reg = <0x0 0xf0d0 0x0 0x10>; + clocks = <&xtal>; }; pwm_ab: pwm@1b000 { @@ -1556,12 +1688,12 @@ #size-cells = <1>; ranges = <0 0x0 0xfffc0000 0x20000>; - cpu_scp_lpri: scp-shmem@0 { + cpu_scp_lpri: scp-shmem@13000 { compatible = "amlogic,meson-axg-scp-shmem"; reg = <0x13000 0x400>; }; - cpu_scp_hpri: scp-shmem@200 { + cpu_scp_hpri: scp-shmem@13400 { compatible = "amlogic,meson-axg-scp-shmem"; reg = <0x13400 0x400>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 765247bc4f24..e14e0ce7e89f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -125,6 +125,7 @@ status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; pinctrl-names = "default"; + hdmi-supply = <&hdmi_5v>; }; &hdmi_tx_tmds_port { diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index f1e5cdbade5e..44c5c51ff1fa 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -262,6 +262,11 @@ status = "disabled"; }; + clock-measure@8758 { + compatible = "amlogic,meson-gx-clk-measure"; + reg = <0x0 0x8758 0x0 0x10>; + }; + i2c_B: i2c@87c0 { compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; reg = <0x0 0x087c0 0x0 0x20>; @@ -462,7 +467,7 @@ compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; reg = <0x0 0xc9410000 0x0 0x10000 0x0 0xc8834540 0x0 0x4>; - interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index cbe99bd4e06d..8cd50b75171d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -191,7 +191,7 @@ pinctrl-names = "default"; }; -&pinctrl_aobus { +&gpio_ao { gpio-line-names = "UART TX", "UART RX", "Power Control", "Power Key In", "VCCK En", "CON1 Header Pin31", "I2S Header Pin6", "IR In", "I2S Header Pin7", @@ -201,7 +201,7 @@ ""; }; -&pinctrl_periphs { +&gpio { gpio-line-names = /* Bank GPIOZ */ "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk", "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2", diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 54954b314a45..2e1cd5e3a246 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -143,7 +143,6 @@ interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; - eee-broken-1000t; }; }; }; @@ -187,7 +186,7 @@ pinctrl-names = "default"; }; -&pinctrl_aobus { +&gpio_ao { gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En", "USB HUB nRESET", "USB OTG Power En", "J7 Header Pin2", "IR In", "J7 Header Pin4", @@ -197,7 +196,7 @@ ""; }; -&pinctrl_periphs { +&gpio { gpio-line-names = /* Bank GPIOZ */ "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk", "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2", diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi index 70325b273bd2..ec09bb5792b7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi @@ -142,7 +142,6 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; - eee-broken-1000t; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 1ade7e486828..a7b883ced0a8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -81,6 +81,7 @@ mux { groups = "uart_tx_ao_a", "uart_rx_ao_a"; function = "uart_ao"; + bias-disable; }; }; @@ -89,6 +90,7 @@ groups = "uart_cts_ao_a", "uart_rts_ao_a"; function = "uart_ao"; + bias-disable; }; }; @@ -96,6 +98,7 @@ mux { groups = "uart_tx_ao_b", "uart_rx_ao_b"; function = "uart_ao_b"; + bias-disable; }; }; @@ -104,6 +107,7 @@ groups = "uart_cts_ao_b", "uart_rts_ao_b"; function = "uart_ao_b"; + bias-disable; }; }; @@ -111,6 +115,7 @@ mux { groups = "remote_input_ao"; function = "remote_input_ao"; + bias-disable; }; }; @@ -119,6 +124,7 @@ groups = "i2c_sck_ao", "i2c_sda_ao"; function = "i2c_ao"; + bias-disable; }; }; @@ -126,6 +132,7 @@ mux { groups = "pwm_ao_a_3"; function = "pwm_ao_a_3"; + bias-disable; }; }; @@ -133,6 +140,7 @@ mux { groups = "pwm_ao_a_6"; function = "pwm_ao_a_6"; + bias-disable; }; }; @@ -140,6 +148,7 @@ mux { groups = "pwm_ao_a_12"; function = "pwm_ao_a_12"; + bias-disable; }; }; @@ -147,6 +156,7 @@ mux { groups = "pwm_ao_b"; function = "pwm_ao_b"; + bias-disable; }; }; @@ -154,6 +164,7 @@ mux { groups = "i2s_am_clk"; function = "i2s_out_ao"; + bias-disable; }; }; @@ -161,6 +172,7 @@ mux { groups = "i2s_out_ao_clk"; function = "i2s_out_ao"; + bias-disable; }; }; @@ -168,6 +180,7 @@ mux { groups = "i2s_out_lr_clk"; function = "i2s_out_ao"; + bias-disable; }; }; @@ -175,6 +188,7 @@ mux { groups = "i2s_out_ch01_ao"; function = "i2s_out_ao"; + bias-disable; }; }; @@ -182,6 +196,7 @@ mux { groups = "i2s_out_ch23_ao"; function = "i2s_out_ao"; + bias-disable; }; }; @@ -189,6 +204,7 @@ mux { groups = "i2s_out_ch45_ao"; function = "i2s_out_ao"; + bias-disable; }; }; @@ -203,6 +219,7 @@ mux { groups = "spdif_out_ao_13"; function = "spdif_out_ao"; + bias-disable; }; }; @@ -210,6 +227,7 @@ mux { groups = "ao_cec"; function = "cec_ao"; + bias-disable; }; }; @@ -217,6 +235,7 @@ mux { groups = "ee_cec"; function = "cec_ao"; + bias-disable; }; }; }; @@ -280,6 +299,12 @@ &clkc_AO { compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc"; + clocks = <&xtal>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "mpeg-clk"; +}; + +&efuse { + clocks = <&clkc CLKID_EFUSE>; }; ðmac { @@ -311,6 +336,8 @@ clkc: clock-controller { compatible = "amlogic,gxbb-clkc"; #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "xtal"; }; }; @@ -359,6 +386,7 @@ "emmc_cmd", "emmc_clk"; function = "emmc"; + bias-disable; }; }; @@ -366,6 +394,7 @@ mux { groups = "emmc_ds"; function = "emmc"; + bias-disable; }; }; @@ -373,9 +402,6 @@ mux { groups = "BOOT_8"; function = "gpio_periphs"; - }; - cfg-pull-down { - pins = "BOOT_8"; bias-pull-down; }; }; @@ -387,6 +413,7 @@ "nor_c", "nor_cs"; function = "nor"; + bias-disable; }; }; @@ -396,6 +423,7 @@ "spi_mosi", "spi_sclk"; function = "spi"; + bias-disable; }; }; @@ -403,6 +431,7 @@ mux { groups = "spi_ss0"; function = "spi"; + bias-disable; }; }; @@ -415,6 +444,7 @@ "sdcard_cmd", "sdcard_clk"; function = "sdcard"; + bias-disable; }; }; @@ -422,9 +452,6 @@ mux { groups = "CARD_2"; function = "gpio_periphs"; - }; - cfg-pull-down { - pins = "CARD_2"; bias-pull-down; }; }; @@ -438,6 +465,7 @@ "sdio_cmd", "sdio_clk"; function = "sdio"; + bias-disable; }; }; @@ -445,9 +473,6 @@ mux { groups = "GPIOX_4"; function = "gpio_periphs"; - }; - cfg-pull-down { - pins = "GPIOX_4"; bias-pull-down; }; }; @@ -456,6 +481,7 @@ mux { groups = "sdio_irq"; function = "sdio"; + bias-disable; }; }; @@ -464,6 +490,7 @@ groups = "uart_tx_a", "uart_rx_a"; function = "uart_a"; + bias-disable; }; }; @@ -472,6 +499,7 @@ groups = "uart_cts_a", "uart_rts_a"; function = "uart_a"; + bias-disable; }; }; @@ -480,6 +508,7 @@ groups = "uart_tx_b", "uart_rx_b"; function = "uart_b"; + bias-disable; }; }; @@ -488,6 +517,7 @@ groups = "uart_cts_b", "uart_rts_b"; function = "uart_b"; + bias-disable; }; }; @@ -496,6 +526,7 @@ groups = "uart_tx_c", "uart_rx_c"; function = "uart_c"; + bias-disable; }; }; @@ -504,6 +535,7 @@ groups = "uart_cts_c", "uart_rts_c"; function = "uart_c"; + bias-disable; }; }; @@ -512,6 +544,7 @@ groups = "i2c_sck_a", "i2c_sda_a"; function = "i2c_a"; + bias-disable; }; }; @@ -520,6 +553,7 @@ groups = "i2c_sck_b", "i2c_sda_b"; function = "i2c_b"; + bias-disable; }; }; @@ -528,6 +562,7 @@ groups = "i2c_sck_c", "i2c_sda_c"; function = "i2c_c"; + bias-disable; }; }; @@ -548,6 +583,7 @@ "eth_txd2", "eth_txd3"; function = "eth"; + bias-disable; }; }; @@ -563,6 +599,7 @@ "eth_txd0", "eth_txd1"; function = "eth"; + bias-disable; }; }; @@ -570,6 +607,7 @@ mux { groups = "pwm_a_x"; function = "pwm_a_x"; + bias-disable; }; }; @@ -577,6 +615,7 @@ mux { groups = "pwm_a_y"; function = "pwm_a_y"; + bias-disable; }; }; @@ -584,6 +623,7 @@ mux { groups = "pwm_b"; function = "pwm_b"; + bias-disable; }; }; @@ -591,6 +631,7 @@ mux { groups = "pwm_d"; function = "pwm_d"; + bias-disable; }; }; @@ -598,6 +639,7 @@ mux { groups = "pwm_e"; function = "pwm_e"; + bias-disable; }; }; @@ -605,6 +647,7 @@ mux { groups = "pwm_f_x"; function = "pwm_f_x"; + bias-disable; }; }; @@ -612,6 +655,7 @@ mux { groups = "pwm_f_y"; function = "pwm_f_y"; + bias-disable; }; }; @@ -619,6 +663,7 @@ mux { groups = "hdmi_hpd"; function = "hdmi_hpd"; + bias-disable; }; }; @@ -626,6 +671,7 @@ mux { groups = "hdmi_sda", "hdmi_scl"; function = "hdmi_i2c"; + bias-disable; }; }; @@ -633,6 +679,7 @@ mux { groups = "i2sout_ch23_y"; function = "i2s_out"; + bias-disable; }; }; @@ -640,6 +687,7 @@ mux { groups = "i2sout_ch45_y"; function = "i2s_out"; + bias-disable; }; }; @@ -647,6 +695,7 @@ mux { groups = "i2sout_ch67_y"; function = "i2s_out"; + bias-disable; }; }; @@ -654,6 +703,7 @@ mux { groups = "spdif_out_y"; function = "spdif_out"; + bias-disable; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts new file mode 100644 index 000000000000..82b1c4851147 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> + +#include "meson-gxl-s905x.dtsi" + +/ { + compatible = "libretech,aml-s805x-ac", "amlogic,s805x", + "amlogic,meson-gxl"; + model = "Libre Computer Board AML-S805X-AC"; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + spi0 = &spifc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cvbs-connector { + /* + * The pads are present but no connector is soldered on + * 2J2, so keep this off by default. + */ + status = "disabled"; + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + dc_5v: regulator-dc_5v { + compatible = "regulator-fixed"; + regulator-name = "DC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x20000000>; + }; + + vcck: regulator-vcck { + compatible = "regulator-fixed"; + regulator-name = "VCCK"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_5v>; + + /* + * This is controlled by GPIOAO_9 we reserve this but + * claiming it as done below reset the board anyway + * Need to investigate this + * + * gpio = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + * enable-active-high; + */ + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_5v>; + regulator-always-on; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +ðmac { + status = "okay"; +}; + +&internal_phy { + pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; + pinctrl-names = "default"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&gpio_ao { + gpio-line-names = "UART TX", + "UART RX", + "7J1 Header Pin31", + "", "", "", "", + "IR In", + "HDMI CEC", + "5V VCCK Regulator", + /* GPIO_TEST_N */ + ""; +}; + +&gpio { + gpio-line-names = /* Bank GPIOZ */ + "", "", "", "", "", "", "", + "", "", "", "", "", "", "", + "Eth Link LED", "Eth Activity LED", + /* Bank GPIOH */ + "HDMI HPD", "HDMI SDA", "HDMI SCL", + "", "7J1 Header Pin13", + "7J1 Header Pin15", + "7J1 Header Pin7", + "7J1 Header Pin12", + "7J1 Header Pin16", + "7J1 Header Pin18", + /* Bank BOOT */ + "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", + "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7", + "eMMC Clk", "eMMC Reset", "eMMC CMD", + "SPI NOR MOSI", "SPI NOR MISO", "SPI NOR Clk", + "", "SPI NOR Chip Select", + /* Bank CARD */ + "", "", "", "", "", "", "", + /* Bank GPIODV */ + "", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", + "7J1 Header Pin27", "7J1 Header Pin28", "", + "7J1 Header Pin29", + "VCCK Regulator", "VDDEE Regulator", + /* Bank GPIOX */ + "7J1 Header Pin22", "7J1 Header Pin26", + "7J1 Header Pin36", "7J1 Header Pin38", + "7J1 Header Pin40", "7J1 Header Pin37", + "7J1 Header Pin33", "7J1 Header Pin35", + "7J1 Header Pin19", "7J1 Header Pin21", + "7J1 Header Pin24", "7J1 Header Pin23", + "7J1 Header Pin8", "7J1 Header Pin10", + "", "", "7J1 Header Pin32", "", "", + /* Bank GPIOCLK */ + "", ""; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_boot>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&spifc { + status = "okay"; + pinctrl-0 = <&nor_pins>; + pinctrl-names = "default"; + + w25q32: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <3000000>; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts index 15014faa2ab2..0c8e8305b1f3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -86,6 +86,7 @@ max-speed = <1000>; interrupt-parent = <&gpio_intc>; interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + eee-broken-1000t; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts new file mode 100644 index 000000000000..9a8a8a7e4b53 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 He Yangxuan + */ + +/dts-v1/; + +#include "meson-gxl-s905d-p230.dts" + +/ { + compatible = "phicomm,n1", "amlogic,s905d", "amlogic,meson-gxl"; + model = "Phicomm N1"; + + cvbs-connector { + status = "disabled"; + }; +}; + +&cvbs_vdac_port { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index d32cf3846370..5499e8de5c74 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -78,6 +78,7 @@ status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; pinctrl-names = "default"; + hdmi-supply = <&hdmi_5v>; }; &hdmi_tx_tmds_port { @@ -112,7 +113,7 @@ linux,rc-map-name = "rc-geekbox"; }; -&pinctrl_aobus { +&gpio_ao { gpio-line-names = "UART TX", "UART RX", "Power Key In", @@ -127,7 +128,7 @@ ""; }; -&pinctrl_periphs { +&gpio { gpio-line-names = /* Bank GPIOZ */ "", "", "", "", "", "", "", "", "", "", "", "", "", "", @@ -187,6 +188,13 @@ }; }; +&uart_A { + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + }; +}; + /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */ &uart_AO { status = "okay"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 90a56af967a7..db293440e4ca 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -155,6 +155,7 @@ status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; pinctrl-names = "default"; + hdmi-supply = <&hdmi_5v>; }; &hdmi_tx_tmds_port { @@ -163,7 +164,7 @@ }; }; -&pinctrl_aobus { +&gpio_ao { gpio-line-names = "UART TX", "UART RX", "Blue LED", @@ -178,7 +179,7 @@ "7J1 Header Pin15"; }; -&pinctrl_periphs { +&gpio { gpio-line-names = /* Bank GPIOZ */ "", "", "", "", "", "", "", "", "", "", "", "", "", "", diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts index 5896e8a5d86b..2602940c2077 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts @@ -51,6 +51,7 @@ status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; pinctrl-names = "default"; + hdmi-supply = <&hdmi_5v>; }; &hdmi_tx_tmds_port { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 8f0bb3c44bd6..d5c3d78aafeb 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -75,6 +75,10 @@ }; }; +&efuse { + clocks = <&clkc CLKID_EFUSE>; +}; + ðmac { reg = <0x0 0xc9410000 0x0 0x10000 0x0 0xc8834540 0x0 0x4>; @@ -112,6 +116,7 @@ mux { groups = "uart_tx_ao_a", "uart_rx_ao_a"; function = "uart_ao"; + bias-disable; }; }; @@ -120,6 +125,7 @@ groups = "uart_cts_ao_a", "uart_rts_ao_a"; function = "uart_ao"; + bias-disable; }; }; @@ -127,6 +133,7 @@ mux { groups = "uart_tx_ao_b", "uart_rx_ao_b"; function = "uart_ao_b"; + bias-disable; }; }; @@ -134,6 +141,7 @@ mux { groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1"; function = "uart_ao_b"; + bias-disable; }; }; @@ -142,6 +150,7 @@ groups = "uart_cts_ao_b", "uart_rts_ao_b"; function = "uart_ao_b"; + bias-disable; }; }; @@ -149,6 +158,7 @@ mux { groups = "remote_input_ao"; function = "remote_input_ao"; + bias-disable; }; }; @@ -157,6 +167,7 @@ groups = "i2c_sck_ao", "i2c_sda_ao"; function = "i2c_ao"; + bias-disable; }; }; @@ -164,6 +175,7 @@ mux { groups = "pwm_ao_a_3"; function = "pwm_ao_a"; + bias-disable; }; }; @@ -171,6 +183,7 @@ mux { groups = "pwm_ao_a_8"; function = "pwm_ao_a"; + bias-disable; }; }; @@ -178,6 +191,7 @@ mux { groups = "pwm_ao_b"; function = "pwm_ao_b"; + bias-disable; }; }; @@ -185,6 +199,7 @@ mux { groups = "pwm_ao_b_6"; function = "pwm_ao_b"; + bias-disable; }; }; @@ -192,6 +207,7 @@ mux { groups = "i2s_out_ch23_ao"; function = "i2s_out_ao"; + bias-disable; }; }; @@ -199,6 +215,7 @@ mux { groups = "i2s_out_ch45_ao"; function = "i2s_out_ao"; + bias-disable; }; }; @@ -206,6 +223,7 @@ mux { groups = "spdif_out_ao_6"; function = "spdif_out_ao"; + bias-disable; }; }; @@ -213,6 +231,7 @@ mux { groups = "spdif_out_ao_9"; function = "spdif_out_ao"; + bias-disable; }; }; @@ -220,6 +239,7 @@ mux { groups = "ao_cec"; function = "cec_ao"; + bias-disable; }; }; @@ -227,6 +247,7 @@ mux { groups = "ee_cec"; function = "cec_ao"; + bias-disable; }; }; }; @@ -239,6 +260,8 @@ &clkc_AO { compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc"; + clocks = <&xtal>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "mpeg-clk"; }; &gpio_intc { @@ -263,6 +286,8 @@ clkc: clock-controller { compatible = "amlogic,gxl-clkc"; #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "xtal"; }; }; @@ -306,6 +331,7 @@ "emmc_cmd", "emmc_clk"; function = "emmc"; + bias-disable; }; }; @@ -313,6 +339,7 @@ mux { groups = "emmc_ds"; function = "emmc"; + bias-disable; }; }; @@ -320,9 +347,6 @@ mux { groups = "BOOT_8"; function = "gpio_periphs"; - }; - cfg-pull-down { - pins = "BOOT_8"; bias-pull-down; }; }; @@ -334,6 +358,7 @@ "nor_c", "nor_cs"; function = "nor"; + bias-disable; }; }; @@ -343,6 +368,7 @@ "spi_mosi", "spi_sclk"; function = "spi"; + bias-disable; }; }; @@ -350,6 +376,7 @@ mux { groups = "spi_ss0"; function = "spi"; + bias-disable; }; }; @@ -362,6 +389,7 @@ "sdcard_cmd", "sdcard_clk"; function = "sdcard"; + bias-disable; }; }; @@ -369,9 +397,6 @@ mux { groups = "CARD_2"; function = "gpio_periphs"; - }; - cfg-pull-down { - pins = "CARD_2"; bias-pull-down; }; }; @@ -385,6 +410,7 @@ "sdio_cmd", "sdio_clk"; function = "sdio"; + bias-disable; }; }; @@ -392,9 +418,6 @@ mux { groups = "GPIOX_4"; function = "gpio_periphs"; - }; - cfg-pull-down { - pins = "GPIOX_4"; bias-pull-down; }; }; @@ -403,6 +426,7 @@ mux { groups = "sdio_irq"; function = "sdio"; + bias-disable; }; }; @@ -411,6 +435,7 @@ groups = "uart_tx_a", "uart_rx_a"; function = "uart_a"; + bias-disable; }; }; @@ -419,6 +444,7 @@ groups = "uart_cts_a", "uart_rts_a"; function = "uart_a"; + bias-disable; }; }; @@ -427,6 +453,7 @@ groups = "uart_tx_b", "uart_rx_b"; function = "uart_b"; + bias-disable; }; }; @@ -435,6 +462,7 @@ groups = "uart_cts_b", "uart_rts_b"; function = "uart_b"; + bias-disable; }; }; @@ -443,6 +471,7 @@ groups = "uart_tx_c", "uart_rx_c"; function = "uart_c"; + bias-disable; }; }; @@ -451,6 +480,7 @@ groups = "uart_cts_c", "uart_rts_c"; function = "uart_c"; + bias-disable; }; }; @@ -459,6 +489,7 @@ groups = "i2c_sck_a", "i2c_sda_a"; function = "i2c_a"; + bias-disable; }; }; @@ -467,6 +498,7 @@ groups = "i2c_sck_b", "i2c_sda_b"; function = "i2c_b"; + bias-disable; }; }; @@ -475,6 +507,7 @@ groups = "i2c_sck_c", "i2c_sda_c"; function = "i2c_c"; + bias-disable; }; }; @@ -495,6 +528,7 @@ "eth_txd2", "eth_txd3"; function = "eth"; + bias-disable; }; }; @@ -502,6 +536,7 @@ mux { groups = "eth_link_led"; function = "eth_led"; + bias-disable; }; }; @@ -516,6 +551,7 @@ mux { groups = "pwm_a"; function = "pwm_a"; + bias-disable; }; }; @@ -523,6 +559,7 @@ mux { groups = "pwm_b"; function = "pwm_b"; + bias-disable; }; }; @@ -530,6 +567,7 @@ mux { groups = "pwm_c"; function = "pwm_c"; + bias-disable; }; }; @@ -537,6 +575,7 @@ mux { groups = "pwm_d"; function = "pwm_d"; + bias-disable; }; }; @@ -544,6 +583,7 @@ mux { groups = "pwm_e"; function = "pwm_e"; + bias-disable; }; }; @@ -551,6 +591,7 @@ mux { groups = "pwm_f_clk"; function = "pwm_f"; + bias-disable; }; }; @@ -558,6 +599,7 @@ mux { groups = "pwm_f_x"; function = "pwm_f"; + bias-disable; }; }; @@ -565,6 +607,7 @@ mux { groups = "hdmi_hpd"; function = "hdmi_hpd"; + bias-disable; }; }; @@ -572,6 +615,7 @@ mux { groups = "hdmi_sda", "hdmi_scl"; function = "hdmi_i2c"; + bias-disable; }; }; @@ -579,6 +623,7 @@ mux { groups = "i2s_am_clk"; function = "i2s_out"; + bias-disable; }; }; @@ -586,6 +631,7 @@ mux { groups = "i2s_out_ao_clk"; function = "i2s_out"; + bias-disable; }; }; @@ -593,6 +639,7 @@ mux { groups = "i2s_out_lr_clk"; function = "i2s_out"; + bias-disable; }; }; @@ -600,12 +647,14 @@ mux { groups = "i2s_out_ch01"; function = "i2s_out"; + bias-disable; }; }; i2sout_ch23_z_pins: i2sout_ch23_z { mux { groups = "i2sout_ch23_z"; function = "i2s_out"; + bias-disable; }; }; @@ -613,6 +662,7 @@ mux { groups = "i2sout_ch45_z"; function = "i2s_out"; + bias-disable; }; }; @@ -620,6 +670,7 @@ mux { groups = "i2sout_ch67_z"; function = "i2s_out"; + bias-disable; }; }; @@ -627,6 +678,7 @@ mux { groups = "spdif_out_h"; function = "spdif_out"; + bias-disable; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 313f88f8759e..3c3a667a8df8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -132,19 +132,15 @@ map1 { trip = <&cpu_alert1>; - cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>; - }; - - map2 { - trip = <&cpu_alert1>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - map3 { - trip = <&cpu_alert1>; - cooling-device = - <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>, + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -271,6 +267,7 @@ status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; pinctrl-names = "default"; + hdmi-supply = <&hdmi_5v>; }; &hdmi_tx_tmds_port { diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts index 602f63f72c37..fe4fda473c0a 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts +++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts @@ -78,6 +78,20 @@ <0x00000008 0x80000000 0 0x80000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* Chipselect 2,00000000 is physically at 0x18000000 */ + vram: vram@18000000 { + /* 8 MB of designated video RAM */ + compatible = "shared-dma-pool"; + reg = <0x00000000 0x18000000 0 0x00800000>; + no-map; + }; + }; + gic: interrupt-controller@2c001000 { compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -107,6 +121,15 @@ <0 63 4>; }; + panel { + compatible = "arm,rtsm-display"; + port { + panel_in: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + }; + smb@8000000 { compatible = "simple-bus"; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index d2dbc3f39263..b25f3cbd3da8 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -24,11 +24,6 @@ bank-width = <4>; }; - v2m_video_ram: vram@2,00000000 { - compatible = "arm,vexpress-vram"; - reg = <2 0x00000000 0x00800000>; - }; - ethernet@2,02000000 { compatible = "smsc,lan91c111"; reg = <2 0x02000000 0x10000>; @@ -187,38 +182,16 @@ interrupts = <14>; clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>; clock-names = "clcdclk", "apb_pclk"; - arm,pl11x,framebuffer = <0x18000000 0x00180000>; - memory-region = <&v2m_video_ram>; - max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ + /* 800x600 16bpp @36MHz works fine */ + max-memory-bandwidth = <54000000>; + memory-region = <&vram>; port { - v2m_clcd_pads: endpoint { - remote-endpoint = <&v2m_clcd_panel>; + clcd_pads: endpoint { + remote-endpoint = <&panel_in>; arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; - - panel { - compatible = "panel-dpi"; - - port { - v2m_clcd_panel: endpoint { - remote-endpoint = <&v2m_clcd_pads>; - }; - }; - - panel-timing { - clock-frequency = <63500127>; - hactive = <1024>; - hback-porch = <152>; - hfront-porch = <48>; - hsync-len = <104>; - vactive = <768>; - vback-porch = <23>; - vfront-porch = <3>; - vsync-len = <4>; - }; - }; }; virtio-block@130000 { diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts index 38880380e0fa..8981c3d2ff18 100644 --- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts +++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts @@ -65,6 +65,20 @@ reg = <0 0x80000000 0 0x80000000>; /* 2GB @ 2GB */ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* Chipselect 2 is physically at 0x18000000 */ + vram: vram@18000000 { + /* 8 MB of designated video RAM */ + compatible = "shared-dma-pool"; + reg = <0 0x18000000 0 0x00800000>; + no-map; + }; + }; + gic: interrupt-controller@2c001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi index fe3a0b14bee6..81b72393dd0d 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi @@ -55,37 +55,44 @@ thermal-zones { map0 { /* Set maximum frequency as 1800MHz */ trip = <&atlas0_alert_0>; - cooling-device = <&cpu4 1 2>; + cooling-device = <&cpu4 1 2>, <&cpu5 1 2>, + <&cpu6 1 2>, <&cpu7 1 2>; }; map1 { /* Set maximum frequency as 1700MHz */ trip = <&atlas0_alert_1>; - cooling-device = <&cpu4 2 3>; + cooling-device = <&cpu4 2 3>, <&cpu5 2 3>, + <&cpu6 2 3>, <&cpu7 2 3>; }; map2 { /* Set maximum frequency as 1600MHz */ trip = <&atlas0_alert_2>; - cooling-device = <&cpu4 3 4>; + cooling-device = <&cpu4 3 4>, <&cpu5 3 4>, + <&cpu6 3 4>, <&cpu7 3 4>; }; map3 { /* Set maximum frequency as 1500MHz */ trip = <&atlas0_alert_3>; - cooling-device = <&cpu4 4 5>; + cooling-device = <&cpu4 4 5>, <&cpu5 4 5>, + <&cpu6 4 5>, <&cpu7 4 5>; }; map4 { /* Set maximum frequency as 1400MHz */ trip = <&atlas0_alert_4>; - cooling-device = <&cpu4 5 7>; + cooling-device = <&cpu4 5 7>, <&cpu5 5 7>, + <&cpu6 5 7>, <&cpu7 5 7>; }; map5 { /* Set maximum frequencyas 1200MHz */ trip = <&atlas0_alert_5>; - cooling-device = <&cpu4 7 9>; + cooling-device = <&cpu4 7 9>, <&cpu5 7 9>, + <&cpu6 7 9>, <&cpu7 7 9>; }; map6 { /* Set maximum frequency as 1000MHz */ trip = <&atlas0_alert_6>; - cooling-device = <&cpu4 9 14>; + cooling-device = <&cpu4 9 14>, <&cpu5 9 14>, + <&cpu6 9 14>, <&cpu7 9 14>; }; }; }; @@ -222,27 +229,32 @@ thermal-zones { map0 { /* Set maximum frequency as 1200MHz */ trip = <&apollo_alert_2>; - cooling-device = <&cpu0 1 2>; + cooling-device = <&cpu0 1 2>, <&cpu1 1 2>, + <&cpu2 1 2>, <&cpu3 1 2>; }; map1 { /* Set maximum frequency as 1100MHz */ trip = <&apollo_alert_3>; - cooling-device = <&cpu0 2 3>; + cooling-device = <&cpu0 2 3>, <&cpu1 2 3>, + <&cpu2 2 3>, <&cpu3 2 3>; }; map2 { /* Set maximum frequency as 1000MHz */ trip = <&apollo_alert_4>; - cooling-device = <&cpu0 3 4>; + cooling-device = <&cpu0 3 4>, <&cpu1 3 4>, + <&cpu2 3 4>, <&cpu3 3 4>; }; map3 { /* Set maximum frequency as 900MHz */ trip = <&apollo_alert_5>; - cooling-device = <&cpu0 4 5>; + cooling-device = <&cpu0 4 5>, <&cpu1 4 5>, + <&cpu2 4 5>, <&cpu3 4 5>; }; map4 { /* Set maximum frequency as 800MHz */ trip = <&apollo_alert_6>; - cooling-device = <&cpu0 5 9>; + cooling-device = <&cpu0 5 9>, <&cpu1 5 9>, + <&cpu2 5 9>, <&cpu3 5 9>; }; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 2131f12364cb..84446f95b2eb 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -1559,10 +1559,12 @@ }; usbdrd30: usbdrd { - compatible = "samsung,exynos5250-dwusb3"; + compatible = "samsung,exynos5433-dwusb3"; clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, - <&cmu_fsys CLK_SCLK_USBDRD30>; - clock-names = "usbdrd30", "usbdrd30_susp_clk"; + <&cmu_fsys CLK_SCLK_USBDRD30>, + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>, + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>; + clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1570,6 +1572,10 @@ usbdrd_dwc3: dwc3@15400000 { compatible = "snps,dwc3"; + clocks = <&cmu_fsys CLK_SCLK_USBDRD30>, + <&cmu_fsys CLK_ACLK_USBDRD30>, + <&cmu_fsys CLK_SCLK_USBDRD30>; + clock-names = "ref", "bus_early", "suspend"; reg = <0x15400000 0x10000>; interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>; @@ -1606,10 +1612,12 @@ }; usbhost30: usbhost { - compatible = "samsung,exynos5250-dwusb3"; + compatible = "samsung,exynos5433-dwusb3"; clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, - <&cmu_fsys CLK_SCLK_USBHOST30>; - clock-names = "usbdrd30", "usbdrd30_susp_clk"; + <&cmu_fsys CLK_SCLK_USBHOST30>, + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>, + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>; + clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1617,6 +1625,10 @@ usbhost_dwc3: dwc3@15a00000 { compatible = "snps,dwc3"; + clocks = <&cmu_fsys CLK_SCLK_USBHOST30>, + <&cmu_fsys CLK_ACLK_USBHOST30>, + <&cmu_fsys CLK_SCLK_USBHOST30>; + clock-names = "ref", "bus_early", "suspend"; reg = <0x15a00000 0x10000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 86e18adb695a..7748e6dfc3c9 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -1,7 +1,10 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb @@ -13,3 +16,5 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts new file mode 100644 index 000000000000..8749634c55ee --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Freescale LS1012A FRWY Board. + * + * Copyright 2018 NXP + * + * Pramod Kumar <pramod.kumar_1@nxp.com> + * + */ +/dts-v1/; + +#include "fsl-ls1012a.dtsi" + +/ { + model = "LS1012A FRWY Board"; + compatible = "fsl,ls1012a-frwy", "fsl,ls1012a"; +}; + +&duart0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 5da732f82fa0..816f3a4537e3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -475,7 +475,7 @@ }; pcie@3400000 { - compatible = "fsl,ls1012a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls1012a-pcie"; reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -496,6 +496,7 @@ <0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts new file mode 100644 index 000000000000..14c79f4691ea --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for NXP LS1028A QDS Board. + * + * Copyright 2018 NXP + * + * Harninder Rai <harninder.rai@nxp.com> + * + */ + +/dts-v1/; + +#include "fsl-ls1028a.dtsi" + +/ { + model = "LS1028A QDS Board"; + compatible = "fsl,ls1028a-qds", "fsl,ls1028a"; + + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + serial0 = &duart0; + serial1 = &duart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x1 0x00000000>; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9847"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + current-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + current-monitor@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; + + eeprom@56 { + compatible = "atmel,24c512"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c512"; + reg = <0x57>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts new file mode 100644 index 000000000000..fdeb4176fc33 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for NXP LS1028A RDB Board. + * + * Copyright 2018 NXP + * + * Harninder Rai <harninder.rai@nxp.com> + * + */ + +/dts-v1/; +#include "fsl-ls1028a.dtsi" + +/ { + model = "LS1028A RDB Board"; + compatible = "fsl,ls1028a-rdb", "fsl,ls1028a"; + + aliases { + serial0 = &duart0; + serial1 = &duart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x1 0x0000000>; + }; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9847"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02>; + + current-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; + }; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi new file mode 100644 index 000000000000..a8cf92af05fb --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -0,0 +1,339 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for NXP Layerscape-1028A family SoC. + * + * Copyright 2018 NXP + * + * Harninder Rai <harninder.rai@nxp.com> + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "fsl,ls1028a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0>; + enable-method = "psci"; + clocks = <&clockgen 1 0>; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x1>; + enable-method = "psci"; + clocks = <&clockgen 1 0>; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + idle-states { + /* + * PSCI node is not added default, U-boot will add missing + * parts if it determines to use PSCI. + */ + entry-method = "arm,psci"; + + CPU_PH20: cpu-ph20 { + compatible = "arm,idle-state"; + idle-state-name = "PH20"; + arm,psci-suspend-param = <0x00010000>; + entry-latency-us = <1000>; + exit-latency-us = <1000>; + min-residency-us = <3000>; + }; + }; + + sysclk: clock-sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + + reboot { + compatible ="syscon-reboot"; + regmap = <&dcfg>; + offset = <0xb0>; + mask = <0x02>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + gic: interrupt-controller@6000000 { + compatible= "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + reg= <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06040000 0 0x40000>; /* GIC Redistributor */ + #interrupt-cells= <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) | + IRQ_TYPE_LEVEL_LOW)>; + its: gic-its@6020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */ + }; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ddr: memory-controller@1080000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1080000 0x0 0x1000>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + big-endian; + }; + + dcfg: syscon@1e00000 { + compatible = "fsl,ls1028a-dcfg", "syscon"; + reg = <0x0 0x1e00000 0x0 0x10000>; + big-endian; + }; + + scfg: syscon@1fc0000 { + compatible = "fsl,ls1028a-scfg", "syscon"; + reg = <0x0 0x1fc0000 0x0 0x10000>; + big-endian; + }; + + clockgen: clock-controller@1300000 { + compatible = "fsl,ls1028a-clockgen"; + reg = <0x0 0x1300000 0x0 0xa0000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + i2c0: i2c@2000000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + i2c1: i2c@2010000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2010000 0x0 0x10000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + i2c2: i2c@2020000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2020000 0x0 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + i2c3: i2c@2030000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2030000 0x0 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + i2c4: i2c@2040000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2040000 0x0 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + i2c5: i2c@2050000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2050000 0x0 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + i2c6: i2c@2060000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2060000 0x0 0x10000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + i2c7: i2c@2070000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2070000 0x0 0x10000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + duart0: serial@21c0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x00 0x21c0500 0x0 0x100>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + duart1: serial@21c0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x00 0x21c0600 0x0 0x100>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + gpio1: gpio@2300000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2310000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@2320000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2320000 0x0 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wdog0: watchdog@23c0000 { + compatible = "fsl,ls1028a-wdt", "fsl,imx21-wdt"; + reg = <0x0 0x23c0000 0x0 0x10000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + sata: sata@3200000 { + compatible = "fsl,ls1028a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20140520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + smmu: iommu@5000000 { + compatible = "arm,mmu-500"; + reg = <0 0x5000000 0 0x800000>; + #global-interrupts = <8>; + #iommu-cells = <1>; + stream-match-mask = <0x7c00>; + /* global secure fault */ + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + /* combined secure interrupt */ + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + /* global non-secure fault */ + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + /* combined non-secure interrupt */ + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + /* performance counter interrupts 0-7 */ + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + /* per context interrupt, 64 interrupts */ + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index dff3d648172e..8a500940f124 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -135,7 +135,6 @@ }; &qspi { - bus-num = <0>; status = "okay"; qflash0: s25fl128s@0 { @@ -143,6 +142,8 @@ #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 3fed504b5381..70057b4e46e8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -171,8 +171,10 @@ map0 { trip = <&cpu_alert>; cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -661,7 +663,7 @@ }; pcie@3400000 { - compatible = "fsl,ls1043a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls1043a-pcie"; reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -683,10 +685,11 @@ <0000 0 0 2 &gic 0 111 0x4>, <0000 0 0 3 &gic 0 112 0x4>, <0000 0 0 4 &gic 0 113 0x4>; + status = "disabled"; }; pcie@3500000 { - compatible = "fsl,ls1043a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls1043a-pcie"; reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -708,10 +711,11 @@ <0000 0 0 2 &gic 0 121 0x4>, <0000 0 0 3 &gic 0 122 0x4>, <0000 0 0 4 &gic 0 123 0x4>; + status = "disabled"; }; pcie@3600000 { - compatible = "fsl,ls1043a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls1043a-pcie"; reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ 0x50 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -733,7 +737,30 @@ <0000 0 0 2 &gic 0 155 0x4>, <0000 0 0 3 &gic 0 156 0x4>, <0000 0 0 4 &gic 0 157 0x4>; + status = "disabled"; }; + + qdma: dma-controller@8380000 { + compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma"; + reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8390000 0x0 0x10000>, /* Status regs */ + <0x0 0x83a0000 0x0 0x40000>; /* Block regs */ + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "qdma-error", "qdma-queue0", + "qdma-queue1", "qdma-queue2", "qdma-queue3"; + dma-channels = <8>; + block-number = <1>; + block-offset = <0x10000>; + fsl,dma-queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + big-endian; + }; + }; firmware { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index e58a8ca1386c..2f220ec4947b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -163,8 +163,6 @@ }; &qspi { - num-cs = <2>; - bus-num = <0>; status = "okay"; qflash0: s25fl128s@0 { @@ -172,6 +170,8 @@ #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index a59b48203688..07c665c6e0dc 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -99,8 +99,6 @@ }; &qspi { - num-cs = <2>; - bus-num = <0>; status = "okay"; qflash0: s25fs512s@0 { @@ -108,6 +106,8 @@ #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; @@ -116,6 +116,8 @@ #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <1>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 51cbd50012d6..9a2106e60e19 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -140,8 +140,10 @@ map0 { trip = <&cpu_alert>; cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -630,7 +632,7 @@ }; pcie@3400000 { - compatible = "fsl,ls1046a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls1046a-pcie"; reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -652,10 +654,11 @@ <0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; pcie@3500000 { - compatible = "fsl,ls1046a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls1046a-pcie"; reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -677,10 +680,11 @@ <0000 0 0 2 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; pcie@3600000 { - compatible = "fsl,ls1046a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls1046a-pcie"; reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ 0x50 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -702,6 +706,28 @@ <0000 0 0 2 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + qdma: dma-controller@8380000 { + compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma"; + reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8390000 0x0 0x10000>, /* Status regs */ + <0x0 0x83a0000 0x0 0x40000>; /* Block regs */ + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "qdma-error", "qdma-queue0", + "qdma-queue1", "qdma-queue2", "qdma-queue3"; + dma-channels = <8>; + block-number = <1>; + block-offset = <0x10000>; + fsl,dma-queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + big-endian; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index a07f612ab56b..de93b42b1f51 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -152,15 +152,14 @@ map0 { trip = <&cpu_alert>; cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - - map1 { - trip = <&cpu_alert>; - cooling-device = - <&cpu4 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -174,77 +173,6 @@ <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ }; - fsl_mc: fsl-mc@80c000000 { - compatible = "fsl,qoriq-mc"; - reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ - <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ - msi-parent = <&its>; - #address-cells = <3>; - #size-cells = <1>; - - /* - * Region type 0x0 - MC portals - * Region type 0x1 - QBMAN portals - */ - ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 - 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; - - dpmacs { - #address-cells = <1>; - #size-cells = <0>; - - dpmac1: dpmac@1 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <1>; - }; - - dpmac2: dpmac@2 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <2>; - }; - - dpmac3: dpmac@3 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <3>; - }; - - dpmac4: dpmac@4 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <4>; - }; - - dpmac5: dpmac@5 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <5>; - }; - - dpmac6: dpmac@6 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <6>; - }; - - dpmac7: dpmac@7 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <7>; - }; - - dpmac8: dpmac@8 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <8>; - }; - - dpmac9: dpmac@9 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <9>; - }; - - dpmac10: dpmac@a { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0xa>; - }; - }; - }; - psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -262,6 +190,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; clockgen: clocking@1300000 { compatible = "fsl,ls1088a-clockgen"; @@ -512,7 +441,7 @@ }; pcie@3400000 { - compatible = "fsl,ls1088a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls1088a-pcie"; reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x20 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -533,10 +462,11 @@ <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; pcie@3500000 { - compatible = "fsl,ls1088a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls1088a-pcie"; reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ 0x28 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -557,10 +487,11 @@ <0000 0 0 2 &gic 0 0 0 115 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic 0 0 0 116 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic 0 0 0 117 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; pcie@3600000 { - compatible = "fsl,ls1088a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls1088a-pcie"; reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ 0x30 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -581,6 +512,7 @@ <0000 0 0 2 &gic 0 0 0 120 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic 0 0 0 121 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic 0 0 0 122 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; cluster1_core0_watchdog: wdt@c000000 { @@ -638,6 +570,77 @@ clocks = <&clockgen 4 3>, <&clockgen 4 3>; clock-names = "apb_pclk", "wdog_clk"; }; + + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + msi-parent = <&its>; + #address-cells = <3>; + #size-cells = <1>; + + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; + + dpmacs { + #address-cells = <1>; + #size-cells = <0>; + + dpmac1: dpmac@1 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <1>; + }; + + dpmac2: dpmac@2 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <2>; + }; + + dpmac3: dpmac@3 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <3>; + }; + + dpmac4: dpmac@4 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <4>; + }; + + dpmac5: dpmac@5 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <5>; + }; + + dpmac6: dpmac@6 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <6>; + }; + + dpmac7: dpmac@7 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <7>; + }; + + dpmac8: dpmac@8 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <8>; + }; + + dpmac9: dpmac@9 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <9>; + }; + + dpmac10: dpmac@a { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xa>; + }; + }; + }; }; firmware { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi index 7c882da3f6b0..a5f668d786b8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -119,7 +119,7 @@ }; &pcie1 { - compatible = "fsl,ls2088a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls2088a-pcie"; reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x20 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -128,7 +128,7 @@ }; &pcie2 { - compatible = "fsl,ls2088a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls2088a-pcie"; reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ 0x28 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -137,7 +137,7 @@ }; &pcie3 { - compatible = "fsl,ls2088a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls2088a-pcie"; reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ 0x30 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -146,7 +146,7 @@ }; &pcie4 { - compatible = "fsl,ls2088a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls2088a-pcie"; reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ 0x38 0x00000000 0x0 0x00002000>; /* configuration space */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi index c11f52e7ae9a..10d2fe091965 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -134,6 +134,8 @@ #size-cells = <1>; compatible = "st,m25p80"; spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; flash2: s25fl256s1@2 { @@ -141,6 +143,8 @@ #size-cells = <1>; compatible = "st,m25p80"; spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <2>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index d188774a36e8..6d6ca166f86b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -101,26 +101,14 @@ map0 { trip = <&cpu_alert>; cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu_alert>; - cooling-device = - <&cpu2 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - map2 { - trip = <&cpu_alert>; - cooling-device = - <&cpu4 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - map3 { - trip = <&cpu_alert>; - cooling-device = - <&cpu6 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -630,8 +618,7 @@ }; pcie1: pcie@3400000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", - "snps,dw-pcie"; + compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; reg-names = "regs", "config"; interrupts = <0 108 0x4>; /* Level high type */ interrupt-names = "intr"; @@ -648,11 +635,11 @@ <0000 0 0 2 &gic 0 0 0 110 4>, <0000 0 0 3 &gic 0 0 0 111 4>, <0000 0 0 4 &gic 0 0 0 112 4>; + status = "disabled"; }; pcie2: pcie@3500000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", - "snps,dw-pcie"; + compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; reg-names = "regs", "config"; interrupts = <0 113 0x4>; /* Level high type */ interrupt-names = "intr"; @@ -669,11 +656,11 @@ <0000 0 0 2 &gic 0 0 0 115 4>, <0000 0 0 3 &gic 0 0 0 116 4>, <0000 0 0 4 &gic 0 0 0 117 4>; + status = "disabled"; }; pcie3: pcie@3600000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", - "snps,dw-pcie"; + compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; reg-names = "regs", "config"; interrupts = <0 118 0x4>; /* Level high type */ interrupt-names = "intr"; @@ -690,11 +677,11 @@ <0000 0 0 2 &gic 0 0 0 120 4>, <0000 0 0 3 &gic 0 0 0 121 4>, <0000 0 0 4 &gic 0 0 0 122 4>; + status = "disabled"; }; pcie4: pcie@3700000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", - "snps,dw-pcie"; + compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; reg-names = "regs", "config"; interrupts = <0 123 0x4>; /* Level high type */ interrupt-names = "intr"; @@ -711,6 +698,7 @@ <0000 0 0 2 &gic 0 0 0 125 4>, <0000 0 0 3 &gic 0 0 0 126 4>, <0000 0 0 4 &gic 0 0 0 127 4>; + status = "disabled"; }; sata0: sata@3200000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts new file mode 100644 index 000000000000..99a22abbe725 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160AQDS +// +// Copyright 2018 NXP + +/dts-v1/; + +#include "fsl-lx2160a.dtsi" + +/ { + model = "NXP Layerscape LX2160AQDS"; + compatible = "fsl,lx2160a-qds", "fsl,lx2160a"; + + aliases { + crypto = &crypto; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "MC34717-3.3VSB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&crypto { + status = "okay"; +}; + +&esdhc0 { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + power-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + + power-monitor@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + + temperature-sensor@4d { + compatible = "nxp,sa56004"; + reg = <0x4d>; + vcc-supply = <&sb_3v3>; + }; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts new file mode 100644 index 000000000000..6481e5f20e69 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160ARDB +// +// Copyright 2018 NXP + +/dts-v1/; + +#include "fsl-lx2160a.dtsi" + +/ { + model = "NXP Layerscape LX2160ARDB"; + compatible = "fsl,lx2160a-rdb", "fsl,lx2160a"; + + aliases { + crypto = &crypto; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "MC34717-3.3VSB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&crypto { + status = "okay"; +}; + +&esdhc0 { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +&esdhc1 { + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + power-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + + temperature-sensor@4d { + compatible = "nxp,sa56004"; + reg = <0x4d>; + vcc-supply = <&sb_3v3>; + }; + }; + }; +}; + +&i2c4 { + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + // IRQ10_B + interrupts = <0 150 0x4>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi new file mode 100644 index 000000000000..a79f5c1ea56d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -0,0 +1,766 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree Include file for Layerscape-LX2160A family SoC. +// +// Copyright 2018 NXP + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/memreserve/ 0x80000000 0x00010000; + +/ { + compatible = "fsl,lx2160a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + // 8 clusters having 2 Cortex-A72 cores each + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x0>; + clocks = <&clockgen 1 0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster0_l2>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x1>; + clocks = <&clockgen 1 0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster0_l2>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x100>; + clocks = <&clockgen 1 1>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster1_l2>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x101>; + clocks = <&clockgen 1 1>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster1_l2>; + }; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x200>; + clocks = <&clockgen 1 2>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster2_l2>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x201>; + clocks = <&clockgen 1 2>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster2_l2>; + }; + + cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x300>; + clocks = <&clockgen 1 3>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster3_l2>; + }; + + cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x301>; + clocks = <&clockgen 1 3>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster3_l2>; + }; + + cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x400>; + clocks = <&clockgen 1 4>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster4_l2>; + }; + + cpu@401 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x401>; + clocks = <&clockgen 1 4>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster4_l2>; + }; + + cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x500>; + clocks = <&clockgen 1 5>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster5_l2>; + }; + + cpu@501 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x501>; + clocks = <&clockgen 1 5>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster5_l2>; + }; + + cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x600>; + clocks = <&clockgen 1 6>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster6_l2>; + }; + + cpu@601 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x601>; + clocks = <&clockgen 1 6>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster6_l2>; + }; + + cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x700>; + clocks = <&clockgen 1 7>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster7_l2>; + }; + + cpu@701 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x701>; + clocks = <&clockgen 1 7>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster7_l2>; + }; + + cluster0_l2: l2-cache0 { + compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + }; + + cluster1_l2: l2-cache1 { + compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + }; + + cluster2_l2: l2-cache2 { + compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + }; + + cluster3_l2: l2-cache3 { + compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + }; + + cluster4_l2: l2-cache4 { + compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + }; + + cluster5_l2: l2-cache5 { + compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + }; + + cluster6_l2: l2-cache6 { + compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + }; + + cluster7_l2: l2-cache7 { + compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + }; + }; + + gic: interrupt-controller@6000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x06000000 0 0x10000>, // GIC Dist + <0x0 0x06200000 0 0x200000>, // GICR (RD_base + + // SGI_base) + <0x0 0x0c0c0000 0 0x2000>, // GICC + <0x0 0x0c0d0000 0 0x1000>, // GICH + <0x0 0x0c0e0000 0 0x20000>; // GICV + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + its: gic-its@6020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x6020000 0 0x20000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + memory@80000000 { + // DRAM space - 1, size : 2 GB DRAM + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>; + }; + + ddr1: memory-controller@1080000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1080000 0x0 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + }; + + ddr2: memory-controller@1090000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1090000 0x0 0x1000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + }; + + // One clock unit-sysclk node which bootloader require during DT fix-up + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; // fixed up by bootloader + clock-output-names = "sysclk"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + crypto: crypto@8000000 { + compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x8000000 0x100000>; + reg = <0x00 0x8000000 0x0 0x100000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; + status = "disabled"; + + sec_jr0: jr@10000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@20000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x20000 0x10000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr@30000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + clockgen: clock-controller@1300000 { + compatible = "fsl,lx2160a-clockgen"; + reg = <0 0x1300000 0 0xa0000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + dcfg: syscon@1e00000 { + compatible = "fsl,lx2160a-dcfg", "syscon"; + reg = <0x0 0x1e00000 0x0 0x10000>; + little-endian; + }; + + i2c0: i2c@2000000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "i2c"; + clocks = <&clockgen 4 7>; + scl-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + i2c1: i2c@2010000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2010000 0x0 0x10000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "i2c"; + clocks = <&clockgen 4 7>; + status = "disabled"; + }; + + i2c2: i2c@2020000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2020000 0x0 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "i2c"; + clocks = <&clockgen 4 7>; + status = "disabled"; + }; + + i2c3: i2c@2030000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2030000 0x0 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "i2c"; + clocks = <&clockgen 4 7>; + status = "disabled"; + }; + + i2c4: i2c@2040000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2040000 0x0 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "i2c"; + clocks = <&clockgen 4 7>; + scl-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + i2c5: i2c@2050000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2050000 0x0 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "i2c"; + clocks = <&clockgen 4 7>; + status = "disabled"; + }; + + i2c6: i2c@2060000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2060000 0x0 0x10000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "i2c"; + clocks = <&clockgen 4 7>; + status = "disabled"; + }; + + i2c7: i2c@2070000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2070000 0x0 0x10000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "i2c"; + clocks = <&clockgen 4 7>; + status = "disabled"; + }; + + esdhc0: esdhc@2140000 { + compatible = "fsl,esdhc"; + reg = <0x0 0x2140000 0x0 0x10000>; + interrupts = <0 28 0x4>; /* Level high type */ + clocks = <&clockgen 4 1>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + little-endian; + bus-width = <4>; + status = "disabled"; + }; + + esdhc1: esdhc@2150000 { + compatible = "fsl,esdhc"; + reg = <0x0 0x2150000 0x0 0x10000>; + interrupts = <0 63 0x4>; /* Level high type */ + clocks = <&clockgen 4 1>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + broken-cd; + little-endian; + bus-width = <4>; + status = "disabled"; + }; + + uart0: serial@21c0000 { + compatible = "arm,sbsa-uart","arm,pl011"; + reg = <0x0 0x21c0000 0x0 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + current-speed = <115200>; + status = "disabled"; + }; + + uart1: serial@21d0000 { + compatible = "arm,sbsa-uart","arm,pl011"; + reg = <0x0 0x21d0000 0x0 0x1000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + current-speed = <115200>; + status = "disabled"; + }; + + uart2: serial@21e0000 { + compatible = "arm,sbsa-uart","arm,pl011"; + reg = <0x0 0x21e0000 0x0 0x1000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + current-speed = <115200>; + status = "disabled"; + }; + + uart3: serial@21f0000 { + compatible = "arm,sbsa-uart","arm,pl011"; + reg = <0x0 0x21f0000 0x0 0x1000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + current-speed = <115200>; + status = "disabled"; + }; + + gpio0: gpio@2300000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + little-endian; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@2310000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + little-endian; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2320000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2320000 0x0 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + little-endian; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@2330000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2330000 0x0 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + little-endian; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + watchdog@23a0000 { + compatible = "arm,sbsa-gwdt"; + reg = <0x0 0x23a0000 0 0x1000>, + <0x0 0x2390000 0 0x1000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + timeout-sec = <30>; + }; + + usb0: usb@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + status = "disabled"; + }; + + usb1: usb@3110000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + status = "disabled"; + }; + + smmu: iommu@5000000 { + compatible = "arm,mmu-500"; + reg = <0 0x5000000 0 0x800000>; + #iommu-cells = <1>; + #global-interrupts = <14>; + // global secure fault + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + // combined secure + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + // global non-secure fault + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + // combined non-secure + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + // performance counter interrupts 0-9 + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + // per context interrupt, 64 interrupts + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; + }; + }; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index c98bcbc8dfba..46435466f1ab 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -85,36 +85,36 @@ compatible = "gpio-leds"; user_led1 { - label = "user_led1"; + label = "green:user1"; /* gpio_150_user_led1 */ gpios = <&gpio18 6 0>; linux,default-trigger = "heartbeat"; }; user_led2 { - label = "user_led2"; + label = "green:user2"; /* gpio_151_user_led2 */ gpios = <&gpio18 7 0>; - linux,default-trigger = "mmc0"; + linux,default-trigger = "none"; }; user_led3 { - label = "user_led3"; + label = "green:user3"; /* gpio_189_user_led3 */ gpios = <&gpio23 5 0>; - default-state = "off"; + linux,default-trigger = "mmc0"; }; user_led4 { - label = "user_led4"; + label = "green:user4"; /* gpio_190_user_led4 */ gpios = <&gpio23 6 0>; panic-indicator; - linux,default-trigger = "cpu0"; + linux,default-trigger = "none"; }; wlan_active_led { - label = "wifi_active"; + label = "yellow:wlan"; /* gpio_205_wifi_active */ gpios = <&gpio25 5 0>; linux,default-trigger = "phy0tx"; @@ -122,7 +122,7 @@ }; bt_active_led { - label = "bt_active"; + label = "blue:bt"; gpios = <&gpio25 7 0>; /* gpio_207_user_led1 */ linux,default-trigger = "hci0-power"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index f432b0a88c65..20ae40df61d5 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -79,6 +79,7 @@ capacity-dmips-mhz = <592>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -91,6 +92,7 @@ capacity-dmips-mhz = <592>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -103,6 +105,7 @@ capacity-dmips-mhz = <592>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; cpu4: cpu@100 { @@ -129,6 +132,7 @@ capacity-dmips-mhz = <1024>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; }; cpu6: cpu@102 { @@ -141,6 +145,7 @@ capacity-dmips-mhz = <1024>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; }; cpu7: cpu@103 { @@ -153,6 +158,7 @@ capacity-dmips-mhz = <1024>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; }; idle-states { @@ -1112,12 +1118,18 @@ map0 { trip = <&target>; contribution = <1024>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&target>; contribution = <512>; - cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts index 4f5118642024..c9775b66629f 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts @@ -10,12 +10,19 @@ /dts-v1/; #include "hi3670.dtsi" +#include "hikey970-pinctrl.dtsi" / { model = "HiKey970"; compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670"; aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; serial6 = &uart6; /* console UART */ }; @@ -30,6 +37,337 @@ }; }; +/* + * Legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * "" = no idea, schematic doesn't say, could be + * unrouted (not connected to any external pin) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from "hikey970-schematics.pdf" from HiSilicon. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART2. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ +&gpio0 { + /* GPIO_000-GPIO_007 */ + gpio-line-names = + "", + "TP901", /* TEST_MODE connected to TP901 */ + "", + "GPIO_003_USB_HUB_RESET_N", + "NC", + "[AP_GPS_REF_CLK]", + "[I2C3_SCL]", + "[I2C3_SDA]"; +}; + +&gpio1 { + /* GPIO_008-GPIO_015 */ + gpio-line-names = + "[UART0_CTS]", /* LSEC pin 3: GPIO_008_UART2_CTS_N */ + "[UART0_RTS]", /* LSEC pin 9: GPIO_009_UART2_RTS_N */ + "[UART0_TXD]", /* LSEC pin 5: GPIO_010_UART2_TXD */ + "[UART0_RXD]", /* LSEC pin 7: GPIO_011_UART2_RXD */ + "[USER_LED5]", + "GPIO-I", /* LSEC pin 31: GPIO_013_CAM0_RST_N */ + "[USER_LED3]", + "[USER_LED4]"; +}; + +&gpio2 { + /* GPIO_016-GPIO_023 */ + gpio-line-names = + "GPIO-G", /* LSEC pin 29: GPIO_016_LCD_TE0 */ + "[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */ + "[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */ + "GPIO_019_BT_ACTIVE", + "[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */ + "[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */ + "[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */ + "[I2C3_SDA]"; /* HSEC pin 38: ISP_SDA1 */ +}; + +&gpio3 { + /* GPIO_024-GPIO_031 */ + gpio-line-names = + "GPIO_024_WIFI_ACTIVE", + "GPIO_025_PERST_M.2", + "[I2C4_SCL]", + "[I2C4_SDA]", + "NC", + "GPIO-H", /* LSEC pin 30: GPIO_029_LCD_RST_N */ + "[USER_LED1]", + "GPIO-L"; /* LSEC pin 34: GPIO_031 */ +}; + +&gpio4 { + /* GPIO_032-GPIO_039 */ + gpio-line-names = + "GPIO-K", /* LSEC pin 33: GPIO_032_CAM1_RST_N */ + "GPIO_033_PMU1_EN", + "GPIO_034_USBSW_SEL", + /* + * These two pins should be used for SD(IO) data according + * to the 96boards specification but seems to be repurposed + * for UART 0. They are however named according to the spec. + */ + "[SD_DAT1]", /* HSEC pin 3: GPIO_035_UART0_RXD */ + "[SD_DAT2]", /* HSEC pin 5: GPIO_036_UART0_TXD */ + "[UART1_RXD]", /* LSEC pin 13: DEBUG_UART6_RXD */ + "[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */ + "[SOC_GPS_UART3_CTS_N]"; /* TP2304 */ +}; + +&gpio5 { + /* GPIO_040-GPIO_047 */ + gpio-line-names = + "[SOC_GPS_UART3_RTS_N]", /* TP2302 */ + "[SOC_GPS_UART3_RXD]", /* TP2303 */ + "[SOC_GPS_UART3_TXD]", /* TP2305 */ + "[SOC_BT_UART4_CTS_N]", + "[SOC_BT_UART4_RTS_N]", + "[SOC_BT_UART4_RXD]", + "[SOC_BT_UART4_TXD]", + "NC"; +}; + +&gpio6 { + /* GPIO_048-GPIO_055 */ + gpio-line-names = + "NC", + "GPIO_049_USER_LED6", + "GPIO_050_CAN_RST", + "GPIO_051_WIFI_EN", + "GPIO-D", /* LSEC pin 26 */ + "GPIO-J", /* LSEC pin 32 */ + "GPIO_054_BT_EN", + "[GPIO_055_SEL]"; +}; + +&gpio7 { + /* GPIO_056-GPIO_063 */ + gpio-line-names = + "[PCIE_PERST_L]", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio8 { + /* GPIO_064-GPIO_071 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio9 { + /* GPIO_072-GPIO_079 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio10 { + /* GPIO_080-GPIO_087 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio11 { + /* GPIO_088-GPIO_095 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio12 { + /* GPIO_096-GPIO_103 */ + gpio-line-names = "NC", "", "", "", "", "", "", ""; +}; + +&gpio13 { + /* GPIO_104-GPIO_111 */ + gpio-line-names = "", "", "", "", "", "", "", ""; +}; + +&gpio14 { + /* GPIO_112-GPIO_119 */ + gpio-line-names = "", "", "", "", "", "", "", ""; +}; + +&gpio15 { + /* GPIO_120-GPIO_127 */ + gpio-line-names = "", "", "", "", "", "", "", ""; +}; + +&gpio16 { + /* GPIO_128-GPIO_135 */ + gpio-line-names = + "[WL_SDIO_CLK]", + "[WL_SDIO_CMD]", + "[WL_SDIO_DATA0]", + "[WL_SDIO_DATA1]", + "[WL_SDIO_DATA2]", + "[WL_SDIO_DATA3]", + "[ETH_ISOLATE]", + "NC"; +}; + +&gpio17 { + /* GPIO_136-GPIO_143 */ + gpio-line-names = + "[MINI1CLK_EN]", "NC", "", "", "", "", "", ""; +}; + +&gpio18 { + /* GPIO_144-GPIO_151 */ + gpio-line-names = + "[SPI1_SCLK]", /* HSEC pin 9: GPIO_144_SPI3_CLK */ + "[SPI1_DIN]", /* HSEC pin 11: GPIO_145_SPI3_DI */ + "[SPI1_DOUT]", /* HSEC pin 1: GPIO_146_SPI3_DO */ + "[SPI1_CS]", /* HSEC pin 7: GPIO_147_SPI3_CS0_N */ + "[POWER_INT_N]", + "[CDMA_GPS_SYNC]", + "GPIO_150_PEX_INTA", + "GPIO_151_CAN_INT"; +}; + +&gpio19 { + /* GPIO_152-GPIO_159 */ + gpio-line-names = "", "", "", "", "", "", "", ""; +}; + +&gpio20 { + /* GPIO_160-GPIO_167 */ + gpio-line-names = + "[SD_CLK]", + "[SD_CMD]", + "[SD_DATA0]", + "[SD_DATA1]", + "[SD_DATA2]", + "[SD_DATA3]", + "GPIO_166_ETHCLK_EN", + "GPIO_167_USER_LED2"; +}; + +&gpio21 { + /* GPIO_168-GPIO_175 */ + gpio-line-names = + "GPIO_168_GPS_EN", + "GPIO-C", /* LSEC pin 25: GPIO_169_USIM1_CLK */ + "GPIO-E", /* LSEC pin 27: GPIO_170_USIM1_RST */ + "GPIO-B", /* LSEC pin 24: GPIO_171_USIM1_DATA */ + "", "", "", "", ""; +}; + +&gpio22 { + /* GPIO_176-GPIO_183 */ + gpio-line-names = + "[PMU_PWR_HOLD]", + "GPIO_177_WL_WAKEUP_AP", + "[JTAG_TCK]", + "[JTAG_TMS]", + "[JTAG_TDI]", + "[JTAG_TMS]", + "GPIO_182_FATAL_ERR", + "NC"; +}; + +&gpio23 { + /* GPIO_184-GPIO_191 */ + gpio-line-names = + "GPIO_184_JTAG_SEL", + "GPIO-F", /* LSEC pin 28: GPIO_185_LCD_BL_PWM */ + "[I2C0_SCL]", /* LSEC pin 15: GPIO_186_I2C0_SCL */ + "[I2C0_SDA]", /* LSEC pin 17: GPIO_187_I2C0_SDA */ + "[GPIO_188_I2C1_SCL]", /* Actual SoC I2C1_SCL */ + "[GPIO_189_I2C1_SDA]", /* Actual SoC I2C1_SDA */ + "[I2C1_SCL]", /* LSEC pin 19: GPIO_190_I2C2_SCL */ + "[I2C2_SDA]"; /* LSEC pin 21: GPIO_191_I2C2_SDA */ +}; + +&gpio24 { + /* GPIO_192-GPIO_199 */ + gpio-line-names = + "[SD_LED]", + "NC", + "[PCM_DI]", /* LSEC pin 22: GPIO_194_I2S0_DI */ + "[PCM_DO]", /* LSEC pin 20: GPIO_195_I2S0_DO */ + "[PCM_CLK]", /* LSEC pin 18: GPIO_196_I2S0_XCLK */ + "[PCM_FS]", /* LSEC pin 16: GPIO_197_I2S0_XFS */ + "", + "[I2S2_DO]"; +}; + +&gpio25 { + /* GPIO_200-GPIO_207 */ + gpio-line-names = + "[I2S2_XCLK]", + "[I2S2_XFS]", + "GPIO_202_PERST_ETH", + "GPIO_203_PWRON_DET", + "GPIO_204_PMU1_IRQ_N", + "GPIO_205_SD_DET", + "GPIO_206_GPS_MOTION_INT", + "GPIO_207_HDMI_SEL"; +}; + +&gpio26 { + /* GPIO_208-GPIO_215 */ + gpio-line-names = + "GPIO-A", /* LSEC pin 23: GPIO_208_WAKEUP_SOC */ + "GPIO_209_VBUS_TYPEC", + "NC", + "NC", + "NC", + "[SPI0_SCLK]", /* LSEC pin 8: GPIO_213_SPI2_CLK */ + "[SPI0_DIN]", /* LSEC pin 10: GPIO_214_SPI2_DI */ + "[SPI0_DOUT]"; /* LSEC pin 14: GPIO_215_SPI2_DO */ +}; + +&gpio27 { + /* GPIO_216-GPIO_223 */ + gpio-line-names = + "[SPI0_CS]", /* LSEC pin 12: GPIO_216_SPI2_CS0_N */ + "GPIO_217_HDMI_PD", + "GPIO_218_GPS_WAKEUP_AP", + "GPIO_219_M.2CLK_EN", + "GPIO_220_PERST_MINI", + "GPIO_221_CC_INT", + "[PCIE_CLKREQ_L]", + "NC"; +}; + +&gpio28 { + /* GPIO_224-GPIO_231 */ + gpio-line-names = + "[PMU0_INT]", + "[SPMI_DATA]", + "[SPMI_CLK]", + "[CAN_SPI_CLK]", + "[CAN_SPI_DI]", + "[CAN_SPI_DO]", + "[CAN_SPI_CS]", + "GPIO_231_HDMI_INT"; +}; + +&uart0 { + /* On High speed expansion header */ + label = "HS-UART0"; + status = "okay"; +}; + +&uart2 { + /* On Low speed expansion header */ + label = "LS-UART0"; + status = "okay"; +}; + &uart6 { + /* On Low speed expansion header */ + label = "LS-UART1"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi index c90e6f6a34ec..a5bd6d80b226 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi @@ -7,6 +7,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/hi3670-clock.h> / { compatible = "hisilicon,hi3670"; @@ -144,19 +145,507 @@ #size-cells = <2>; ranges; - uart6_clk: clk_19_2M { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; + crg_ctrl: crg_ctrl@fff35000 { + compatible = "hisilicon,hi3670-crgctrl", "syscon"; + reg = <0x0 0xfff35000 0x0 0x1000>; + #clock-cells = <1>; + }; + + pctrl: pctrl@e8a09000 { + compatible = "hisilicon,hi3670-pctrl", "syscon"; + reg = <0x0 0xe8a09000 0x0 0x1000>; + #clock-cells = <1>; + }; + + pmuctrl: crg_ctrl@fff34000 { + compatible = "hisilicon,hi3670-pmuctrl", "syscon"; + reg = <0x0 0xfff34000 0x0 0x1000>; + #clock-cells = <1>; + }; + + sctrl: sctrl@fff0a000 { + compatible = "hisilicon,hi3670-sctrl", "syscon"; + reg = <0x0 0xfff0a000 0x0 0x1000>; + #clock-cells = <1>; + }; + + iomcu: iomcu@ffd7e000 { + compatible = "hisilicon,hi3670-iomcu", "syscon"; + reg = <0x0 0xffd7e000 0x0 0x1000>; + #clock-cells = <1>; + }; + + media1_crg: media1_crgctrl@e87ff000 { + compatible = "hisilicon,hi3670-media1-crg", "syscon"; + reg = <0x0 0xe87ff000 0x0 0x1000>; + #clock-cells = <1>; + }; + + media2_crg: media2_crgctrl@e8900000 { + compatible = "hisilicon,hi3670-media2-crg","syscon"; + reg = <0x0 0xe8900000 0x0 0x1000>; + #clock-cells = <1>; + }; + + uart0: serial@fdf02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf02000 0x0 0x1000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3670_CLK_GATE_UART0>, + <&crg_ctrl HI3670_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>; + status = "disabled"; + }; + + uart1: serial@fdf00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf00000 0x0 0x1000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3670_CLK_GATE_UART1>, + <&crg_ctrl HI3670_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + status = "disabled"; + }; + + uart2: serial@fdf03000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf03000 0x0 0x1000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3670_CLK_GATE_UART2>, + <&crg_ctrl HI3670_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; + status = "disabled"; + }; + + uart3: serial@ffd74000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xffd74000 0x0 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3670_CLK_GATE_UART3>, + <&crg_ctrl HI3670_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; + status = "disabled"; + }; + + uart4: serial@fdf01000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf01000 0x0 0x1000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3670_CLK_GATE_UART4>, + <&crg_ctrl HI3670_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; + status = "disabled"; + }; + + uart5: serial@fdf05000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf05000 0x0 0x1000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3670_CLK_GATE_UART5>, + <&crg_ctrl HI3670_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + status = "disabled"; }; uart6: serial@fff32000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xfff32000 0x0 0x1000>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart6_clk &uart6_clk>; + clocks = <&crg_ctrl HI3670_CLK_UART6>, + <&crg_ctrl HI3670_PCLK>; clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>; status = "disabled"; }; + + gpio0: gpio@e8a0b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a0b000 0x0 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 1 0 1 &pmx0 3 1 5>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO0>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio@e8a0c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a0c000 0x0 0x1000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO1>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio@e8a0d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a0d000 0x0 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 1 6 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO2>; + clock-names = "apb_pclk"; + }; + + gpio3: gpio@e8a0e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a0e000 0x0 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 13 4 &pmx0 7 17 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO3>; + clock-names = "apb_pclk"; + }; + + gpio4: gpio@e8a0f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a0f000 0x0 0x1000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 18 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO4>; + clock-names = "apb_pclk"; + }; + + gpio5: gpio@e8a10000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a10000 0x0 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 26 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO5>; + clock-names = "apb_pclk"; + }; + + gpio6: gpio@e8a11000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a11000 0x0 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 1 34 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO6>; + clock-names = "apb_pclk"; + }; + + gpio7: gpio@e8a12000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a12000 0x0 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 41 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO7>; + clock-names = "apb_pclk"; + }; + + gpio8: gpio@e8a13000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a13000 0x0 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 49 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO8>; + clock-names = "apb_pclk"; + }; + + gpio9: gpio@e8a14000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a14000 0x0 0x1000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 57 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO9>; + clock-names = "apb_pclk"; + }; + + gpio10: gpio@e8a15000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a15000 0x0 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 65 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO10>; + clock-names = "apb_pclk"; + }; + + gpio11: gpio@e8a16000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a16000 0x0 0x1000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 73 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO11>; + clock-names = "apb_pclk"; + }; + + gpio12: gpio@e8a17000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a17000 0x0 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 81 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO12>; + clock-names = "apb_pclk"; + }; + + gpio13: gpio@e8a18000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a18000 0x0 0x1000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO13>; + clock-names = "apb_pclk"; + }; + + gpio14: gpio@e8a19000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a19000 0x0 0x1000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO14>; + clock-names = "apb_pclk"; + }; + + gpio15: gpio@e8a1a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a1a000 0x0 0x1000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO15>; + clock-names = "apb_pclk"; + }; + + gpio16: gpio@e8a1b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a1b000 0x0 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx5 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO16>; + clock-names = "apb_pclk"; + }; + + gpio17: gpio@e8a1c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a1c000 0x0 0x1000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx5 0 8 2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO17>; + clock-names = "apb_pclk"; + }; + + gpio18: gpio@fff28000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xfff28000 0x0 0x1000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx1 4 42 4>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3670_PCLK_GPIO18>; + clock-names = "apb_pclk"; + }; + + gpio19: gpio@fff29000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xfff29000 0x0 0x1000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx1 0 61 2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3670_PCLK_GPIO19>; + clock-names = "apb_pclk"; + }; + + gpio20: gpio@e8a1f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a1f000 0x0 0x1000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx7 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO20>; + clock-names = "apb_pclk"; + }; + + gpio21: gpio@e8a20000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a20000 0x0 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx7 0 8 4>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO21>; + clock-names = "apb_pclk"; + }; + + gpio22: gpio@fff0b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xfff0b000 0x0 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO176 */ + gpio-ranges = <&pmx1 2 0 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3670_PCLK_AO_GPIO0>; + clock-names = "apb_pclk"; + }; + + gpio23: gpio@fff0c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xfff0c000 0x0 0x1000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO184 */ + gpio-ranges = <&pmx1 0 6 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3670_PCLK_AO_GPIO1>; + clock-names = "apb_pclk"; + }; + + gpio24: gpio@fff0d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xfff0d000 0x0 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO192 */ + gpio-ranges = <&pmx1 0 14 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3670_PCLK_AO_GPIO2>; + clock-names = "apb_pclk"; + }; + + gpio25: gpio@fff0e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xfff0e000 0x0 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO200 */ + gpio-ranges = <&pmx1 0 22 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3670_PCLK_AO_GPIO3>; + clock-names = "apb_pclk"; + }; + + gpio26: gpio@fff0f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xfff0f000 0x0 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO208 */ + gpio-ranges = <&pmx1 0 30 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3670_PCLK_AO_GPIO4>; + clock-names = "apb_pclk"; + }; + + gpio27: gpio@fff10000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xfff10000 0x0 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO216 */ + gpio-ranges = <&pmx1 4 31 4>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3670_PCLK_AO_GPIO5>; + clock-names = "apb_pclk"; + }; + + gpio28: gpio@fff1d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xfff1d000 0x0 0x1000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx1 1 35 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3670_PCLK_AO_GPIO6>; + clock-names = "apb_pclk"; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts index d30f6eb8a5ee..32716c96b457 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts @@ -35,30 +35,31 @@ compatible = "gpio-leds"; user-led0 { - label = "USER-LED0"; + label = "green:user1"; gpios = <&gpio6 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; default-state = "off"; }; user-led1 { - label = "USER-LED1"; + label = "green:user2"; gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; default-state = "off"; }; user-led2 { - label = "USER-LED2"; + label = "green:user3"; gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; + linux,default-trigger = "mmc1"; default-state = "off"; }; user-led3 { - label = "USER-LED3"; + label = "green:user4"; gpios = <&gpio10 6 GPIO_ACTIVE_LOW>; - linux,default-trigger = "cpu0"; + linux,default-trigger = "none"; + panic-indicator; default-state = "off"; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index f4964bee6a1a..610235028cc7 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -340,42 +340,43 @@ leds { compatible = "gpio-leds"; - user_led4 { - label = "user_led4"; + + user_led1 { + label = "green:user1"; gpios = <&gpio4 0 0>; /* <&gpio_user_led_1>; */ linux,default-trigger = "heartbeat"; }; - user_led3 { - label = "user_led3"; + user_led2 { + label = "green:user2"; gpios = <&gpio4 1 0>; /* <&gpio_user_led_2>; */ linux,default-trigger = "mmc0"; }; - user_led2 { - label = "user_led2"; + user_led3 { + label = "green:user3"; gpios = <&gpio4 2 0>; /* <&gpio_user_led_3>; */ linux,default-trigger = "mmc1"; }; - user_led1 { - label = "user_led1"; + user_led4 { + label = "green:user4"; gpios = <&gpio4 3 0>; /* <&gpio_user_led_4>; */ panic-indicator; - linux,default-trigger = "cpu0"; + linux,default-trigger = "none"; }; wlan_active_led { - label = "wifi_active"; + label = "yellow:wlan"; gpios = <&gpio3 5 0>; /* <&gpio_wlan_active_led>; */ linux,default-trigger = "phy0tx"; default-state = "off"; }; bt_active_led { - label = "bt_active"; + label = "blue:bt"; gpios = <&gpio4 7 0>; /* <&gpio_bt_active_led>; */ - linux,default-trigger = "hci0rx"; + linux,default-trigger = "hci0-power"; default-state = "off"; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 97d5bf2c6ec5..aec9e371c2a7 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -893,7 +893,14 @@ cooling-maps { map0 { trip = <&target>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi new file mode 100644 index 000000000000..67bb52d43619 --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Pinctrl dts file for HiSilicon HiKey970 development board + */ + +#include <dt-bindings/pinctrl/hisi.h> + +/ { + soc { + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + + pmx0: pinmux@e896c000 { + compatible = "pinctrl-single"; + reg = <0x0 0xe896c000 0x0 0x72c>; + #pinctrl-cells = <1>; + #gpio-range-cells = <0x3>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 82 0>; + + uart0_pmx_func: uart0_pmx_func { + pinctrl-single,pins = < + 0x054 MUX_M2 /* UART0_RXD */ + 0x058 MUX_M2 /* UART0_TXD */ + >; + }; + + uart2_pmx_func: uart2_pmx_func { + pinctrl-single,pins = < + 0x700 MUX_M2 /* UART2_CTS_N */ + 0x704 MUX_M2 /* UART2_RTS_N */ + 0x708 MUX_M2 /* UART2_RXD */ + 0x70c MUX_M2 /* UART2_TXD */ + >; + }; + + uart3_pmx_func: uart3_pmx_func { + pinctrl-single,pins = < + 0x064 MUX_M1 /* UART3_CTS_N */ + 0x068 MUX_M1 /* UART3_RTS_N */ + 0x06c MUX_M1 /* UART3_RXD */ + 0x070 MUX_M1 /* UART3_TXD */ + >; + }; + + uart4_pmx_func: uart4_pmx_func { + pinctrl-single,pins = < + 0x074 MUX_M1 /* UART4_CTS_N */ + 0x078 MUX_M1 /* UART4_RTS_N */ + 0x07c MUX_M1 /* UART4_RXD */ + 0x080 MUX_M1 /* UART4_TXD */ + >; + }; + + uart6_pmx_func: uart6_pmx_func { + pinctrl-single,pins = < + 0x05c MUX_M1 /* UART6_RXD */ + 0x060 MUX_M1 /* UART6_TXD */ + >; + }; + }; + + pmx2: pinmux@e896c800 { + compatible = "pinconf-single"; + reg = <0x0 0xe896c800 0x0 0x72c>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + + uart0_cfg_func: uart0_cfg_func { + pinctrl-single,pins = < + 0x058 0x0 /* UART0_RXD */ + 0x05c 0x0 /* UART0_TXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + uart2_cfg_func: uart2_cfg_func { + pinctrl-single,pins = < + 0x700 0x0 /* UART2_CTS_N */ + 0x704 0x0 /* UART2_RTS_N */ + 0x708 0x0 /* UART2_RXD */ + 0x70c 0x0 /* UART2_TXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + uart3_cfg_func: uart3_cfg_func { + pinctrl-single,pins = < + 0x068 0x0 /* UART3_CTS_N */ + 0x06c 0x0 /* UART3_RTS_N */ + 0x070 0x0 /* UART3_RXD */ + 0x074 0x0 /* UART3_TXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + uart4_cfg_func: uart4_cfg_func { + pinctrl-single,pins = < + 0x078 0x0 /* UART4_CTS_N */ + 0x07c 0x0 /* UART4_RTS_N */ + 0x080 0x0 /* UART4_RXD */ + 0x084 0x0 /* UART4_TXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + uart6_cfg_func: uart6_cfg_func { + pinctrl-single,pins = < + 0x060 0x0 /* UART6_RXD */ + 0x064 0x0 /* UART6_TXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + }; + + pmx5: pinmux@fc182000 { + compatible = "pinctrl-single"; + reg = <0x0 0xfc182000 0x0 0x028>; + #gpio-range-cells = <3>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 10 0>; + + }; + + pmx6: pinmux@fc182800 { + compatible = "pinconf-single"; + reg = <0x0 0xfc182800 0x0 0x028>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + }; + + pmx7: pinmux@ff37e000 { + compatible = "pinctrl-single"; + reg = <0x0 0xff37e000 0x0 0x030>; + #gpio-range-cells = <3>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 12 0>; + }; + + pmx8: pinmux@ff37e800 { + compatible = "pinconf-single"; + reg = <0x0 0xff37e800 0x0 0x030>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + }; + + pmx1: pinmux@fff11000 { + compatible = "pinctrl-single"; + reg = <0x0 0xfff11000 0x0 0x73c>; + #gpio-range-cells = <0x3>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 46 0>; + }; + + pmx16: pinmux@fff11800 { + compatible = "pinconf-single"; + reg = <0x0 0xfff11800 0x0 0x73c>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index eca8bac6303a..2eff1f927471 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -6,4 +6,5 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts index 3ab25ad402b9..846003bb480c 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -60,9 +60,31 @@ cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; marvell,pad-type = "sd"; vqmmc-supply = <&vcc_sd_reg1>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; status = "okay"; }; +/* U11 */ +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; +/* + * This eMMC is not populated on all boards, so disable it by + * default and let the bootloader enable it, if it is present + */ + status = "disabled"; +}; + &spi0 { status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 4472bcd8f9fb..e05594ea15fb 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -234,6 +234,11 @@ groups = "uart2"; function = "uart"; }; + + mmc_pins: mmc-pins { + groups = "emmc_nb"; + function = "emmc"; + }; }; nb_pm: syscon@14000 { @@ -266,6 +271,11 @@ function = "mii"; }; + sdio_pins: sdio-pins { + groups = "sdio_sb"; + function = "sdio"; + }; + }; eth0: ethernet@30000 { diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index 9473d40a292a..5b4a9609e31f 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -42,7 +42,7 @@ v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { compatible = "regulator-fixed"; - gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>; + gpio = <&cp0_gpio2 15 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&cp0_xhci_vbus_pins>; regulator-name = "v_5v0_usb3_hst_vbus"; @@ -246,6 +246,18 @@ gpios = <1 GPIO_ACTIVE_HIGH>; output-high; }; + + lte_reset { + gpio-hog; + gpios = <2 GPIO_ACTIVE_LOW>; + output-low; + }; + + lte_disable { + gpio-hog; + gpios = <21 GPIO_ACTIVE_LOW>; + output-low; + }; }; &cp0_ethernet { @@ -270,6 +282,10 @@ vqmmc-supply = <&v_3_3>; }; +&cp0_usb3_1 { + status = "okay"; +}; + &cp1_pinctrl { /* * MPP Bus: @@ -333,6 +349,10 @@ */ marvell,reg-init = <3 16 0 0x1017>; reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_copper_eth_phy_reset>; + reset-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; }; switch0: switch0@4 { diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts new file mode 100644 index 000000000000..c3e18fd5bc27 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for MACCHIATOBin Armada 8040 community board platform + */ + +#include "armada-8040-mcbin.dtsi" + +/ { + model = "Marvell 8040 MACCHIATOBin Single-shot"; + compatible = "marvell,armada8040-mcbin-singleshot", + "marvell,armada8040-mcbin", "marvell,armada8040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; +}; + +&cp0_eth0 { + status = "okay"; + phy-mode = "10gbase-kr"; + managed = "in-band-status"; + sfp = <&sfp_eth0>; +}; + +&cp1_eth0 { + status = "okay"; + phy-mode = "10gbase-kr"; + managed = "in-band-status"; + sfp = <&sfp_eth1>; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts index 56fa44860909..d06f5ab7ddab 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -5,226 +5,13 @@ * Device Tree file for MACCHIATOBin Armada 8040 community board platform */ -#include "armada-8040.dtsi" - -#include <dt-bindings/gpio/gpio.h> +#include "armada-8040-mcbin.dtsi" / { - model = "Marvell 8040 MACCHIATOBin"; - compatible = "marvell,armada8040-mcbin", "marvell,armada8040", + model = "Marvell 8040 MACCHIATOBin Double-shot"; + compatible = "marvell,armada8040-mcbin-doubleshot", + "marvell,armada8040-mcbin", "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - aliases { - ethernet0 = &cp0_eth0; - ethernet1 = &cp1_eth0; - ethernet2 = &cp1_eth1; - ethernet3 = &cp1_eth2; - }; - - /* Regulator labels correspond with schematics */ - v_3_3: regulator-3-3v { - compatible = "regulator-fixed"; - regulator-name = "v_3_3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - status = "okay"; - }; - - v_vddo_h: regulator-1-8v { - compatible = "regulator-fixed"; - regulator-name = "v_vddo_h"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - status = "okay"; - }; - - v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_xhci_vbus_pins>; - regulator-name = "v_5v0_usb3_hst_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - status = "okay"; - }; - - usb3h0_phy: usb3_phy0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&v_5v0_usb3_hst_vbus>; - }; - - sfp_eth0: sfp-eth0 { - /* CON15,16 - CPM lane 4 */ - compatible = "sff,sfp"; - i2c-bus = <&sfpp0_i2c>; - los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&cp1_sfpp0_pins>; - }; - - sfp_eth1: sfp-eth1 { - /* CON17,18 - CPS lane 4 */ - compatible = "sff,sfp"; - i2c-bus = <&sfpp1_i2c>; - los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>; - }; - - sfp_eth3: sfp-eth3 { - /* CON13,14 - CPS lane 5 */ - compatible = "sff,sfp"; - i2c-bus = <&sfp_1g_i2c>; - los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>; - }; -}; - -&uart0 { - status = "okay"; - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; -}; - -&ap_sdhci0 { - bus-width = <8>; - /* - * Not stable in HS modes - phy needs "more calibration", so add - * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes. - */ - marvell,xenon-phy-slow-mode; - no-1-8-v; - no-sd; - no-sdio; - non-removable; - status = "okay"; - vqmmc-supply = <&v_vddo_h>; -}; - -&cp0_i2c0 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c0_pins>; - status = "okay"; -}; - -&cp0_i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c1_pins>; - status = "okay"; - - i2c-switch@70 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - - sfpp0_i2c: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - sfpp1_i2c: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - sfp_1g_i2c: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - }; -}; - -/* J25 UART header */ -&cp0_uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&cp0_uart1_pins>; - status = "okay"; -}; - -&cp0_mdio { - pinctrl-names = "default"; - pinctrl-0 = <&cp0_ge_mdio_pins>; - status = "okay"; - - ge_phy: ethernet-phy@0 { - reg = <0>; - }; -}; - -&cp0_pcie0 { - pinctrl-names = "default"; - pinctrl-0 = <&cp0_pcie_pins>; - num-lanes = <4>; - num-viewport = <8>; - reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&cp0_pinctrl { - cp0_ge_mdio_pins: ge-mdio-pins { - marvell,pins = "mpp32", "mpp34"; - marvell,function = "ge"; - }; - cp0_i2c1_pins: i2c1-pins { - marvell,pins = "mpp35", "mpp36"; - marvell,function = "i2c1"; - }; - cp0_i2c0_pins: i2c0-pins { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - cp0_uart1_pins: uart1-pins { - marvell,pins = "mpp40", "mpp41"; - marvell,function = "uart1"; - }; - cp0_xhci_vbus_pins: xhci0-vbus-pins { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - cp0_sfp_1g_pins: sfp-1g-pins { - marvell,pins = "mpp51", "mpp53", "mpp54"; - marvell,function = "gpio"; - }; - cp0_pcie_pins: pcie-pins { - marvell,pins = "mpp52"; - marvell,function = "gpio"; - }; - cp0_sdhci_pins: sdhci-pins { - marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", - "mpp60", "mpp61"; - marvell,function = "sdio"; - }; - cp0_sfpp1_pins: sfpp1-pins { - marvell,pins = "mpp62"; - marvell,function = "gpio"; - }; }; &cp0_xmdio { @@ -243,46 +30,11 @@ }; }; -&cp0_ethernet { - status = "okay"; -}; - &cp0_eth0 { status = "okay"; /* Network PHY */ phy = <&phy0>; phy-mode = "10gbase-kr"; - /* Generic PHY, providing serdes lanes */ - phys = <&cp0_comphy4 0>; -}; - -&cp0_sata0 { - /* CPM Lane 0 - U29 */ - status = "okay"; -}; - -&cp0_sdhci0 { - /* U6 */ - broken-cd; - bus-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_sdhci_pins>; - status = "okay"; - vqmmc-supply = <&v_3_3>; -}; - -&cp0_usb3_0 { - /* J38? - USB2.0 only */ - status = "okay"; -}; - -&cp0_usb3_1 { - /* J38? - USB2.0 only */ - status = "okay"; -}; - -&cp1_ethernet { - status = "okay"; }; &cp1_eth0 { @@ -290,81 +42,4 @@ /* Network PHY */ phy = <&phy8>; phy-mode = "10gbase-kr"; - /* Generic PHY, providing serdes lanes */ - phys = <&cp1_comphy4 0>; -}; - -&cp1_eth1 { - /* CPS Lane 0 - J5 (Gigabit RJ45) */ - status = "okay"; - /* Network PHY */ - phy = <&ge_phy>; - phy-mode = "sgmii"; - /* Generic PHY, providing serdes lanes */ - phys = <&cp1_comphy0 1>; -}; - -&cp1_eth2 { - /* CPS Lane 5 */ - status = "okay"; - /* Network PHY */ - phy-mode = "2500base-x"; - managed = "in-band-status"; - /* Generic PHY, providing serdes lanes */ - phys = <&cp1_comphy5 2>; - sfp = <&sfp_eth3>; -}; - -&cp1_pinctrl { - cp1_sfpp1_pins: sfpp1-pins { - marvell,pins = "mpp8", "mpp10", "mpp11"; - marvell,function = "gpio"; - }; - cp1_spi1_pins: spi1-pins { - marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - cp1_uart0_pins: uart0-pins { - marvell,pins = "mpp6", "mpp7"; - marvell,function = "uart0"; - }; - cp1_sfp_1g_pins: sfp-1g-pins { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; - cp1_sfpp0_pins: sfpp0-pins { - marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29"; - marvell,function = "gpio"; - }; -}; - -/* J27 UART header */ -&cp1_uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&cp1_uart0_pins>; - status = "okay"; -}; - -&cp1_sata0 { - /* CPS Lane 1 - U32 */ - /* CPS Lane 3 - U31 */ - status = "okay"; -}; - -&cp1_spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&cp1_spi1_pins>; - status = "okay"; - - spi-flash@0 { - compatible = "st,w25q32"; - spi-max-frequency = <50000000>; - reg = <0>; - }; -}; - -&cp1_usb3_0 { - /* CPS Lane 2 - CON7 */ - usb-phy = <&usb3h0_phy>; - status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi new file mode 100644 index 000000000000..29ea7e81ec4c --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -0,0 +1,346 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for MACCHIATOBin Armada 8040 community board platform + */ + +#include "armada-8040.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell 8040 MACCHIATOBin"; + compatible = "marvell,armada8040-mcbin", "marvell,armada8040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp1_eth0; + ethernet2 = &cp1_eth1; + ethernet3 = &cp1_eth2; + }; + + /* Regulator labels correspond with schematics */ + v_3_3: regulator-3-3v { + compatible = "regulator-fixed"; + regulator-name = "v_3_3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + + v_vddo_h: regulator-1-8v { + compatible = "regulator-fixed"; + regulator-name = "v_vddo_h"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + status = "okay"; + }; + + v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_xhci_vbus_pins>; + regulator-name = "v_5v0_usb3_hst_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + status = "okay"; + }; + + usb3h0_phy: usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&v_5v0_usb3_hst_vbus>; + }; + + sfp_eth0: sfp-eth0 { + /* CON15,16 - CPM lane 4 */ + compatible = "sff,sfp"; + i2c-bus = <&sfpp0_i2c>; + los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfpp0_pins>; + }; + + sfp_eth1: sfp-eth1 { + /* CON17,18 - CPS lane 4 */ + compatible = "sff,sfp"; + i2c-bus = <&sfpp1_i2c>; + los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>; + }; + + sfp_eth3: sfp-eth3 { + /* CON13,14 - CPS lane 5 */ + compatible = "sff,sfp"; + i2c-bus = <&sfp_1g_i2c>; + los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>; + }; +}; + +&uart0 { + status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +&ap_sdhci0 { + bus-width = <8>; + /* + * Not stable in HS modes - phy needs "more calibration", so add + * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes. + */ + marvell,xenon-phy-slow-mode; + no-1-8-v; + no-sd; + no-sdio; + non-removable; + status = "okay"; + vqmmc-supply = <&v_vddo_h>; +}; + +&cp0_i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + status = "okay"; +}; + +&cp0_i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + sfpp1_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + sfp_1g_i2c: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + }; +}; + +/* J25 UART header */ +&cp0_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_uart1_pins>; + status = "okay"; +}; + +&cp0_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_ge_mdio_pins>; + status = "okay"; + + ge_phy: ethernet-phy@0 { + reg = <0>; + }; +}; + +&cp0_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_pcie_pins>; + num-lanes = <4>; + num-viewport = <8>; + reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&cp0_pinctrl { + cp0_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp32", "mpp34"; + marvell,function = "ge"; + }; + cp0_i2c1_pins: i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_i2c0_pins: i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_uart1_pins: uart1-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "uart1"; + }; + cp0_xhci_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + cp0_sfp_1g_pins: sfp-1g-pins { + marvell,pins = "mpp51", "mpp53", "mpp54"; + marvell,function = "gpio"; + }; + cp0_pcie_pins: pcie-pins { + marvell,pins = "mpp52"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: sdhci-pins { + marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", + "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + cp0_sfpp1_pins: sfpp1-pins { + marvell,pins = "mpp62"; + marvell,function = "gpio"; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +&cp0_eth0 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy4 0>; +}; + +&cp0_sata0 { + /* CPM Lane 0 - U29 */ + status = "okay"; +}; + +&cp0_sdhci0 { + /* U6 */ + broken-cd; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins>; + status = "okay"; + vqmmc-supply = <&v_3_3>; +}; + +&cp0_usb3_0 { + /* J38? - USB2.0 only */ + status = "okay"; +}; + +&cp0_usb3_1 { + /* J38? - USB2.0 only */ + status = "okay"; +}; + +&cp1_ethernet { + status = "okay"; +}; + +&cp1_eth0 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy4 0>; +}; + +&cp1_eth1 { + /* CPS Lane 0 - J5 (Gigabit RJ45) */ + status = "okay"; + /* Network PHY */ + phy = <&ge_phy>; + phy-mode = "sgmii"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy0 1>; +}; + +&cp1_eth2 { + /* CPS Lane 5 */ + status = "okay"; + /* Network PHY */ + phy-mode = "2500base-x"; + managed = "in-band-status"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy5 2>; + sfp = <&sfp_eth3>; +}; + +&cp1_pinctrl { + cp1_sfpp1_pins: sfpp1-pins { + marvell,pins = "mpp8", "mpp10", "mpp11"; + marvell,function = "gpio"; + }; + cp1_spi1_pins: spi1-pins { + marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + cp1_uart0_pins: uart0-pins { + marvell,pins = "mpp6", "mpp7"; + marvell,function = "uart0"; + }; + cp1_sfp_1g_pins: sfp-1g-pins { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + cp1_sfpp0_pins: sfpp0-pins { + marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29"; + marvell,function = "gpio"; + }; +}; + +/* J27 UART header */ +&cp1_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_uart0_pins>; + status = "okay"; +}; + +&cp1_sata0 { + /* CPS Lane 1 - U32 */ + /* CPS Lane 3 - U31 */ + status = "okay"; +}; + +&cp1_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_spi1_pins>; + status = "okay"; + + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&cp1_usb3_0 { + /* CPS Lane 2 - CON7 */ + usb-phy = <&usb3h0_phy>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index abd2f15a544b..412ffd4d426b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -18,6 +18,7 @@ #include <dt-bindings/phy/phy.h> #include <dt-bindings/power/mt8173-power.h> #include <dt-bindings/reset/mt8173-resets.h> +#include <dt-bindings/gce/mt8173-gce.h> #include "mt8173-pinfunc.h" / { @@ -521,6 +522,15 @@ status = "disabled"; }; + gce: mailbox@10212000 { + compatible = "mediatek,mt8173-gce"; + reg = <0 0x10212000 0 0x1000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_GCE>; + clock-names = "gce"; + #mbox-cells = <3>; + }; + mipi_tx0: mipi-dphy@10215000 { compatible = "mediatek,mt8173-mipi-tx"; reg = <0 0x10215000 0 0x1000>; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index bd5305a634b1..65487eee2ce6 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -2,6 +2,7 @@ /dts-v1/; #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/input/gpio-keys.h> #include "tegra186-p3310.dtsi" @@ -50,6 +51,10 @@ vmmc-supply = <&vdd_sd>; }; + hda@3510000 { + status = "okay"; + }; + pcie@10003000 { status = "okay"; @@ -121,6 +126,7 @@ linux,input-type = <EV_KEY>; linux,code = <KEY_POWER>; debounce-interval = <10>; + wakeup-event-action = <EV_ACT_ASSERTED>; wakeup-source; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 13f57fff1477..b539561e7877 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -124,6 +124,10 @@ status = "okay"; }; + rtc@c2a0000 { + status = "okay"; + }; + pmc@c360000 { nvidia,invert-interrupt; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 2f3c8e29520d..22815db4a3ed 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -237,6 +237,7 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA186_RESET_SDMMC1>; reset-names = "sdhci"; + iommus = <&smmu TEGRA186_SID_SDMMC1>; pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; pinctrl-0 = <&sdmmc1_3v3>; pinctrl-1 = <&sdmmc1_1v8>; @@ -262,6 +263,7 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA186_RESET_SDMMC2>; reset-names = "sdhci"; + iommus = <&smmu TEGRA186_SID_SDMMC2>; pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; pinctrl-0 = <&sdmmc2_3v3>; pinctrl-1 = <&sdmmc2_1v8>; @@ -282,6 +284,7 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA186_RESET_SDMMC3>; reset-names = "sdhci"; + iommus = <&smmu TEGRA186_SID_SDMMC3>; pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; pinctrl-0 = <&sdmmc3_3v3>; pinctrl-1 = <&sdmmc3_1v8>; @@ -307,6 +310,7 @@ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>; resets = <&bpmp TEGRA186_RESET_SDMMC4>; reset-names = "sdhci"; + iommus = <&smmu TEGRA186_SID_SDMMC4>; nvidia,pad-autocal-pull-up-offset-hs400 = <0x05>; nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>; nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>; @@ -318,6 +322,22 @@ status = "disabled"; }; + hda@3510000 { + compatible = "nvidia,tegra186-hda", "nvidia,tegra30-hda"; + reg = <0x0 0x03510000 0x0 0x10000>; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_HDA>, + <&bpmp TEGRA186_CLK_HDA2HDMICODEC>, + <&bpmp TEGRA186_CLK_HDA2CODEC_2X>; + clock-names = "hda", "hda2hdmi", "hda2codec_2x"; + resets = <&bpmp TEGRA186_RESET_HDA>, + <&bpmp TEGRA186_RESET_HDA2HDMICODEC>, + <&bpmp TEGRA186_RESET_HDA2CODEC_2X>; + reset-names = "hda", "hda2hdmi", "hda2codec_2x"; + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + status = "disabled"; + }; + fuse@3820000 { compatible = "nvidia,tegra186-efuse"; reg = <0x0 0x03820000 0x0 0x10000>; @@ -336,6 +356,15 @@ interrupt-parent = <&gic>; }; + cec@3960000 { + compatible = "nvidia,tegra186-cec"; + reg = <0x0 0x03960000 0x0 0x10000>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_CEC>; + clock-names = "cec"; + status = "disabled"; + }; + hsp_top0: hsp@3c00000 { compatible = "nvidia,tegra186-hsp"; reg = <0x0 0x03c00000 0x0 0xa0000>; @@ -395,6 +424,16 @@ status = "disabled"; }; + rtc: rtc@c2a0000 { + compatible = "nvidia,tegra186-rtc", "nvidia,tegra20-rtc"; + reg = <0 0x0c2a0000 0 0x10000>; + interrupt-parent = <&pmc>; + interrupts = <73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_CLK_32K>; + clock-names = "rtc"; + status = "disabled"; + }; + gpio_aon: gpio@c2f0000 { compatible = "nvidia,tegra186-gpio-aon"; reg-names = "security", "gpio"; @@ -407,7 +446,7 @@ #interrupt-cells = <2>; }; - pmc@c360000 { + pmc: pmc@c360000 { compatible = "nvidia,tegra186-pmc"; reg = <0 0x0c360000 0 0x10000>, <0 0x0c370000 0 0x10000>, @@ -415,6 +454,9 @@ <0 0x0c390000 0 0x10000>; reg-names = "pmc", "wake", "aotag", "scratch"; + #interrupt-cells = <2>; + interrupt-controller; + sdmmc1_3v3: sdmmc1-3v3 { pins = "sdmmc1-hv"; power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; @@ -660,6 +702,7 @@ display-hub@15200000 { compatible = "nvidia,tegra186-display", "simple-bus"; + reg = <0x15200000 0x00040000>; resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>, <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>, <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP1>, diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index 57d3f00464ce..22a1c267aed9 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -66,6 +66,10 @@ vmmc-supply = <&vdd_emmc_3v3>; }; + rtc@c2a0000 { + status = "okay"; + }; + pmc@c360000 { nvidia,invert-interrupt; }; @@ -163,7 +167,7 @@ in-ldo4-6-supply = <&vdd_5v0_sys>; in-ldo7-8-supply = <&vdd_1v8ls>; - sd0 { + vdd_1v0: sd0 { regulator-name = "VDD_1V0"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -171,7 +175,7 @@ regulator-boot-on; }; - sd1 { + vdd_1v8hs: sd1 { regulator-name = "VDD_1V8HS"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -244,6 +248,17 @@ }; }; }; + + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA194_MAIN_GPIO(H, 2) + IRQ_TYPE_LEVEL_LOW>; + + #thermal-sensor-cells = <1>; + }; }; }; @@ -262,5 +277,16 @@ regulator-always-on; regulator-boot-on; }; + + vdd_hdmi: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + + regulator-name = "VDD_5V0_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index 9ff3c18280c4..adf351010ff5 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -1,10 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/input/gpio-keys.h> + #include "tegra194-p2888.dtsi" / { - model = "NVIDIA Tegra194 P2972-0000 Development Board"; + model = "NVIDIA Jetson AGX Xavier Development Kit"; compatible = "nvidia,p2972-0000", "nvidia,tegra194"; cbb { @@ -12,5 +15,157 @@ sdhci@3400000 { status = "okay"; }; + + ddc: i2c@31c0000 { + status = "okay"; + }; + + pwm@c340000 { + status = "okay"; + }; + + hda@3510000 { + status = "okay"; + }; + + host1x@13e00000 { + display-hub@15200000 { + status = "okay"; + }; + + dpaux@155e0000 { + status = "okay"; + }; + + sor@15b80000 { + status = "okay"; + + avdd-io-supply = <&vdd_1v0>; + vdd-pll-supply = <&vdd_1v8hs>; + hdmi-supply = <&vdd_hdmi>; + + nvidia,ddc-i2c-bus = <&ddc>; + nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 2) + GPIO_ACTIVE_LOW>; + }; + }; + }; + + fan: fan { + compatible = "pwm-fan"; + pwms = <&pwm4 0 45334>; + + cooling-levels = <0 64 128 255>; + cooling-min-state = <0>; + cooling-max-state = <3>; + #cooling-cells = <2>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + force-recovery { + label = "Force Recovery"; + gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0) + GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <BTN_1>; + debounce-interval = <10>; + }; + + power { + label = "Power"; + gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4) + GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + }; + + thermal-zones { + cpu { + polling-delay = <0>; + polling-delay-passive = <500>; + status = "okay"; + + trips { + cpu_trip_critical: critical { + temperature = <96500>; + hysteresis = <0>; + type = "critical"; + }; + + cpu_trip_hot: hot { + temperature = <70000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_trip_active: active { + temperature = <50000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_trip_passive: passive { + temperature = <30000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + cpu-critical { + cooling-device = <&fan 3 3>; + trip = <&cpu_trip_critical>; + }; + + cpu-hot { + cooling-device = <&fan 2 2>; + trip = <&cpu_trip_hot>; + }; + + cpu-active { + cooling-device = <&fan 1 1>; + trip = <&cpu_trip_active>; + }; + + cpu-passive { + cooling-device = <&fan 0 0>; + trip = <&cpu_trip_passive>; + }; + }; + }; + + gpu { + polling-delay = <0>; + polling-delay-passive = <500>; + status = "okay"; + + trips { + gpu_alert0: critical { + temperature = <99000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aux { + polling-delay = <0>; + polling-delay-passive = <500>; + status = "okay"; + + trips { + aux_alert0: critical { + temperature = <90000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 9fc14bb9a0af..6dfa1ca0b851 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -4,6 +4,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/tegra186-hsp.h> #include <dt-bindings/reset/tegra194-reset.h> +#include <dt-bindings/power/tegra194-powergate.h> +#include <dt-bindings/thermal/tegra194-bpmp-thermal.h> / { compatible = "nvidia,tegra194"; @@ -209,6 +211,90 @@ status = "disabled"; }; + pwm1: pwm@3280000 { + compatible = "nvidia,tegra194-pwm", + "nvidia,tegra186-pwm"; + reg = <0x3280000 0x10000>; + clocks = <&bpmp TEGRA194_CLK_PWM1>; + clock-names = "pwm"; + resets = <&bpmp TEGRA194_RESET_PWM1>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pwm2: pwm@3290000 { + compatible = "nvidia,tegra194-pwm", + "nvidia,tegra186-pwm"; + reg = <0x3290000 0x10000>; + clocks = <&bpmp TEGRA194_CLK_PWM2>; + clock-names = "pwm"; + resets = <&bpmp TEGRA194_RESET_PWM2>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pwm3: pwm@32a0000 { + compatible = "nvidia,tegra194-pwm", + "nvidia,tegra186-pwm"; + reg = <0x32a0000 0x10000>; + clocks = <&bpmp TEGRA194_CLK_PWM3>; + clock-names = "pwm"; + resets = <&bpmp TEGRA194_RESET_PWM3>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pwm5: pwm@32c0000 { + compatible = "nvidia,tegra194-pwm", + "nvidia,tegra186-pwm"; + reg = <0x32c0000 0x10000>; + clocks = <&bpmp TEGRA194_CLK_PWM5>; + clock-names = "pwm"; + resets = <&bpmp TEGRA194_RESET_PWM5>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pwm6: pwm@32d0000 { + compatible = "nvidia,tegra194-pwm", + "nvidia,tegra186-pwm"; + reg = <0x32d0000 0x10000>; + clocks = <&bpmp TEGRA194_CLK_PWM6>; + clock-names = "pwm"; + resets = <&bpmp TEGRA194_RESET_PWM6>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pwm7: pwm@32e0000 { + compatible = "nvidia,tegra194-pwm", + "nvidia,tegra186-pwm"; + reg = <0x32e0000 0x10000>; + clocks = <&bpmp TEGRA194_CLK_PWM7>; + clock-names = "pwm"; + resets = <&bpmp TEGRA194_RESET_PWM7>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pwm8: pwm@32f0000 { + compatible = "nvidia,tegra194-pwm", + "nvidia,tegra186-pwm"; + reg = <0x32f0000 0x10000>; + clocks = <&bpmp TEGRA194_CLK_PWM8>; + clock-names = "pwm"; + resets = <&bpmp TEGRA194_RESET_PWM8>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + sdmmc1: sdhci@3400000 { compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci"; reg = <0x03400000 0x10000>; @@ -242,6 +328,22 @@ status = "disabled"; }; + hda@3510000 { + compatible = "nvidia,tegra194-hda", "nvidia,tegra30-hda"; + reg = <0x3510000 0x10000>; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_HDA>, + <&bpmp TEGRA194_CLK_HDA2CODEC_2X>, + <&bpmp TEGRA194_CLK_HDA2HDMICODEC>; + clock-names = "hda", "hda2codec_2x", "hda2hdmi"; + resets = <&bpmp TEGRA194_RESET_HDA>, + <&bpmp TEGRA194_RESET_HDA2CODEC_2X>, + <&bpmp TEGRA194_RESET_HDA2HDMICODEC>; + reset-names = "hda", "hda2codec_2x", "hda2hdmi"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; + status = "disabled"; + }; + gic: interrupt-controller@3881000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -255,6 +357,15 @@ interrupt-parent = <&gic>; }; + cec@3960000 { + compatible = "nvidia,tegra194-cec"; + reg = <0x03960000 0x10000>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_CEC>; + clock-names = "cec"; + status = "disabled"; + }; + hsp_top0: hsp@3c00000 { compatible = "nvidia,tegra186-hsp"; reg = <0x03c00000 0xa0000>; @@ -313,7 +424,44 @@ status = "disabled"; }; - pmc@c360000 { + rtc: rtc@c2a0000 { + compatible = "nvidia,tegra194-rtc", "nvidia,tegra20-rtc"; + reg = <0x0c2a0000 0x10000>; + interrupt-parent = <&pmc>; + interrupts = <73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_CLK_32K>; + clock-names = "rtc"; + status = "disabled"; + }; + + gpio_aon: gpio@c2f0000 { + compatible = "nvidia,tegra194-gpio-aon"; + reg-names = "security", "gpio"; + reg = <0xc2f0000 0x1000>, + <0xc2f1000 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm4: pwm@c340000 { + compatible = "nvidia,tegra194-pwm", + "nvidia,tegra186-pwm"; + reg = <0xc340000 0x10000>; + clocks = <&bpmp TEGRA194_CLK_PWM4>; + clock-names = "pwm"; + resets = <&bpmp TEGRA194_RESET_PWM4>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pmc: pmc@c360000 { compatible = "nvidia,tegra194-pmc"; reg = <0x0c360000 0x10000>, <0x0c370000 0x10000>, @@ -321,6 +469,356 @@ <0x0c390000 0x10000>, <0x0c3a0000 0x10000>; reg-names = "pmc", "wake", "aotag", "scratch", "misc"; + + #interrupt-cells = <2>; + interrupt-controller; + }; + + host1x@13e00000 { + compatible = "nvidia,tegra194-host1x", "simple-bus"; + reg = <0x13e00000 0x10000>, + <0x13e10000 0x10000>; + reg-names = "hypervisor", "vm"; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_HOST1X>; + clock-names = "host1x"; + resets = <&bpmp TEGRA194_RESET_HOST1X>; + reset-names = "host1x"; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x15000000 0x15000000 0x01000000>; + + display-hub@15200000 { + compatible = "nvidia,tegra194-display", "simple-bus"; + reg = <0x15200000 0x00040000>; + resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_MISC>, + <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP0>, + <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP1>, + <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP2>, + <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP3>, + <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP4>, + <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP5>; + reset-names = "misc", "wgrp0", "wgrp1", "wgrp2", + "wgrp3", "wgrp4", "wgrp5"; + clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_DISP>, + <&bpmp TEGRA194_CLK_NVDISPLAYHUB>; + clock-names = "disp", "hub"; + status = "disabled"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x15200000 0x15200000 0x40000>; + + display@15200000 { + compatible = "nvidia,tegra194-dc"; + reg = <0x15200000 0x10000>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P0>; + clock-names = "dc"; + resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD0>; + reset-names = "dc"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; + + nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; + nvidia,head = <0>; + }; + + display@15210000 { + compatible = "nvidia,tegra194-dc"; + reg = <0x15210000 0x10000>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P1>; + clock-names = "dc"; + resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD1>; + reset-names = "dc"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPB>; + + nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; + nvidia,head = <1>; + }; + + display@15220000 { + compatible = "nvidia,tegra194-dc"; + reg = <0x15220000 0x10000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P2>; + clock-names = "dc"; + resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD2>; + reset-names = "dc"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>; + + nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; + nvidia,head = <2>; + }; + + display@15230000 { + compatible = "nvidia,tegra194-dc"; + reg = <0x15230000 0x10000>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P3>; + clock-names = "dc"; + resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD3>; + reset-names = "dc"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>; + + nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; + nvidia,head = <3>; + }; + }; + + vic@15340000 { + compatible = "nvidia,tegra194-vic"; + reg = <0x15340000 0x00040000>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_VIC>; + clock-names = "vic"; + resets = <&bpmp TEGRA194_RESET_VIC>; + reset-names = "vic"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_VIC>; + }; + + dpaux0: dpaux@155c0000 { + compatible = "nvidia,tegra194-dpaux"; + reg = <0x155c0000 0x10000>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_DPAUX>, + <&bpmp TEGRA194_CLK_PLLDP>; + clock-names = "dpaux", "parent"; + resets = <&bpmp TEGRA194_RESET_DPAUX>; + reset-names = "dpaux"; + status = "disabled"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; + + state_dpaux0_aux: pinmux-aux { + groups = "dpaux-io"; + function = "aux"; + }; + + state_dpaux0_i2c: pinmux-i2c { + groups = "dpaux-io"; + function = "i2c"; + }; + + state_dpaux0_off: pinmux-off { + groups = "dpaux-io"; + function = "off"; + }; + + i2c-bus { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + dpaux1: dpaux@155d0000 { + compatible = "nvidia,tegra194-dpaux"; + reg = <0x155d0000 0x10000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_DPAUX1>, + <&bpmp TEGRA194_CLK_PLLDP>; + clock-names = "dpaux", "parent"; + resets = <&bpmp TEGRA194_RESET_DPAUX1>; + reset-names = "dpaux"; + status = "disabled"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; + + state_dpaux1_aux: pinmux-aux { + groups = "dpaux-io"; + function = "aux"; + }; + + state_dpaux1_i2c: pinmux-i2c { + groups = "dpaux-io"; + function = "i2c"; + }; + + state_dpaux1_off: pinmux-off { + groups = "dpaux-io"; + function = "off"; + }; + + i2c-bus { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + dpaux2: dpaux@155e0000 { + compatible = "nvidia,tegra194-dpaux"; + reg = <0x155e0000 0x10000>; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_DPAUX2>, + <&bpmp TEGRA194_CLK_PLLDP>; + clock-names = "dpaux", "parent"; + resets = <&bpmp TEGRA194_RESET_DPAUX2>; + reset-names = "dpaux"; + status = "disabled"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; + + state_dpaux2_aux: pinmux-aux { + groups = "dpaux-io"; + function = "aux"; + }; + + state_dpaux2_i2c: pinmux-i2c { + groups = "dpaux-io"; + function = "i2c"; + }; + + state_dpaux2_off: pinmux-off { + groups = "dpaux-io"; + function = "off"; + }; + + i2c-bus { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + dpaux3: dpaux@155f0000 { + compatible = "nvidia,tegra194-dpaux"; + reg = <0x155f0000 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_DPAUX3>, + <&bpmp TEGRA194_CLK_PLLDP>; + clock-names = "dpaux", "parent"; + resets = <&bpmp TEGRA194_RESET_DPAUX3>; + reset-names = "dpaux"; + status = "disabled"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; + + state_dpaux3_aux: pinmux-aux { + groups = "dpaux-io"; + function = "aux"; + }; + + state_dpaux3_i2c: pinmux-i2c { + groups = "dpaux-io"; + function = "i2c"; + }; + + state_dpaux3_off: pinmux-off { + groups = "dpaux-io"; + function = "off"; + }; + + i2c-bus { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + sor0: sor@15b00000 { + compatible = "nvidia,tegra194-sor"; + reg = <0x15b00000 0x40000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_SOR0_REF>, + <&bpmp TEGRA194_CLK_SOR0_OUT>, + <&bpmp TEGRA194_CLK_PLLD>, + <&bpmp TEGRA194_CLK_PLLDP>, + <&bpmp TEGRA194_CLK_SOR_SAFE>, + <&bpmp TEGRA194_CLK_SOR0_PAD_CLKOUT>; + clock-names = "sor", "out", "parent", "dp", "safe", + "pad"; + resets = <&bpmp TEGRA194_RESET_SOR0>; + reset-names = "sor"; + pinctrl-0 = <&state_dpaux0_aux>; + pinctrl-1 = <&state_dpaux0_i2c>; + pinctrl-2 = <&state_dpaux0_off>; + pinctrl-names = "aux", "i2c", "off"; + status = "disabled"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; + nvidia,interface = <0>; + }; + + sor1: sor@15b40000 { + compatible = "nvidia,tegra194-sor"; + reg = <0x155c0000 0x40000>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_SOR1_REF>, + <&bpmp TEGRA194_CLK_SOR1_OUT>, + <&bpmp TEGRA194_CLK_PLLD2>, + <&bpmp TEGRA194_CLK_PLLDP>, + <&bpmp TEGRA194_CLK_SOR_SAFE>, + <&bpmp TEGRA194_CLK_SOR1_PAD_CLKOUT>; + clock-names = "sor", "out", "parent", "dp", "safe", + "pad"; + resets = <&bpmp TEGRA194_RESET_SOR1>; + reset-names = "sor"; + pinctrl-0 = <&state_dpaux1_aux>; + pinctrl-1 = <&state_dpaux1_i2c>; + pinctrl-2 = <&state_dpaux1_off>; + pinctrl-names = "aux", "i2c", "off"; + status = "disabled"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; + nvidia,interface = <1>; + }; + + sor2: sor@15b80000 { + compatible = "nvidia,tegra194-sor"; + reg = <0x15b80000 0x40000>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_SOR2_REF>, + <&bpmp TEGRA194_CLK_SOR2_OUT>, + <&bpmp TEGRA194_CLK_PLLD3>, + <&bpmp TEGRA194_CLK_PLLDP>, + <&bpmp TEGRA194_CLK_SOR_SAFE>, + <&bpmp TEGRA194_CLK_SOR2_PAD_CLKOUT>; + clock-names = "sor", "out", "parent", "dp", "safe", + "pad"; + resets = <&bpmp TEGRA194_RESET_SOR2>; + reset-names = "sor"; + pinctrl-0 = <&state_dpaux2_aux>; + pinctrl-1 = <&state_dpaux2_i2c>; + pinctrl-2 = <&state_dpaux2_off>; + pinctrl-names = "aux", "i2c", "off"; + status = "disabled"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; + nvidia,interface = <2>; + }; + + sor3: sor@15bc0000 { + compatible = "nvidia,tegra194-sor"; + reg = <0x15bc0000 0x40000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_SOR3_REF>, + <&bpmp TEGRA194_CLK_SOR3_OUT>, + <&bpmp TEGRA194_CLK_PLLD4>, + <&bpmp TEGRA194_CLK_PLLDP>, + <&bpmp TEGRA194_CLK_SOR_SAFE>, + <&bpmp TEGRA194_CLK_SOR3_PAD_CLKOUT>; + clock-names = "sor", "out", "parent", "dp", "safe", + "pad"; + resets = <&bpmp TEGRA194_RESET_SOR3>; + reset-names = "sor"; + pinctrl-0 = <&state_dpaux3_aux>; + pinctrl-1 = <&state_dpaux3_i2c>; + pinctrl-2 = <&state_dpaux3_off>; + pinctrl-names = "aux", "i2c", "off"; + status = "disabled"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; + nvidia,interface = <3>; + }; }; }; @@ -435,6 +933,44 @@ method = "smc"; }; + thermal-zones { + cpu { + thermal-sensors = <&{/bpmp/thermal} + TEGRA194_BPMP_THERMAL_ZONE_CPU>; + status = "disabled"; + }; + + gpu { + thermal-sensors = <&{/bpmp/thermal} + TEGRA194_BPMP_THERMAL_ZONE_GPU>; + status = "disabled"; + }; + + aux { + thermal-sensors = <&{/bpmp/thermal} + TEGRA194_BPMP_THERMAL_ZONE_AUX>; + status = "disabled"; + }; + + pllx { + thermal-sensors = <&{/bpmp/thermal} + TEGRA194_BPMP_THERMAL_ZONE_PLLX>; + status = "disabled"; + }; + + ao { + thermal-sensors = <&{/bpmp/thermal} + TEGRA194_BPMP_THERMAL_ZONE_AO>; + status = "disabled"; + }; + + tj { + thermal-sensors = <&{/bpmp/thermal} + TEGRA194_BPMP_THERMAL_ZONE_TJ_MAX>; + status = "disabled"; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index 365726ddd418..a96e6ee70c21 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1330,6 +1330,10 @@ phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; }; + hda@70030000 { + status = "okay"; + }; + padctl@7009f000 { status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 8fe47d6445a5..2205d66b0443 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -879,6 +879,8 @@ resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>; reset-names = "xusb_host", "xusb_ss", "xusb_src"; + power-domains = <&pd_xusbhost>, <&pd_xusbss>; + power-domain-names = "xusb_host", "xusb_ss"; nvidia,xusb-padctl = <&padctl>; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index a658c07652a7..21d548f02d39 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -8,3 +8,5 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index bf20c55a6bc4..6d50449fbcdf 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -385,8 +385,9 @@ status = "okay"; }; - usb@6a00000 { + usb@6af8800 { status = "okay"; + extcon = <&usb3_id>; dwc3@6a00000 { extcon = <&usb3_id>; @@ -401,8 +402,9 @@ pinctrl-0 = <&usb3_vbus_det_gpio>; }; - usb@7600000 { + usb@76f8800 { status = "okay"; + extcon = <&usb2_id>; dwc3@7600000 { extcon = <&usb2_id>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 390a2fa28514..aa9a0ffedfa9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -689,4 +689,80 @@ bias-pull-up; }; }; + + cci0_default: cci0_default { + pinmux { + function = "cci_i2c"; + pins = "gpio29", "gpio30"; + }; + pinconf { + pins = "gpio29", "gpio30"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera_front_default: camera_front_default { + pinmux_pwdn { + function = "gpio"; + pins = "gpio33"; + }; + pinconf_pwdn { + pins = "gpio33"; + drive-strength = <16>; + bias-disable; + }; + + pinmux_rst { + function = "gpio"; + pins = "gpio28"; + }; + pinconf_rst { + pins = "gpio28"; + drive-strength = <16>; + bias-disable; + }; + + pinmux_mclk1 { + function = "cam_mclk1"; + pins = "gpio27"; + }; + pinconf_mclk1 { + pins = "gpio27"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera_rear_default: camera_rear_default { + pinmux_pwdn { + function = "gpio"; + pins = "gpio34"; + }; + pinconf_pwdn { + pins = "gpio34"; + drive-strength = <16>; + bias-disable; + }; + + pinmux_rst { + function = "gpio"; + pins = "gpio35"; + }; + pinconf_rst { + pins = "gpio35"; + drive-strength = <16>; + bias-disable; + }; + + pinmux_mclk0 { + function = "cam_mclk0"; + pins = "gpio26"; + }; + pinconf_mclk0 { + pins = "gpio26"; + drive-strength = <16>; + bias-disable; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index d302d8d639a1..c5348c3da5a2 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -202,7 +202,10 @@ cooling-maps { map0 { trip = <&cpu_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -229,11 +232,55 @@ cooling-maps { map0 { trip = <&cpu_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + gpu_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + gpu_crit: trip1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + cam_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cam_crit: trip1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + }; + }; cpu_opp_table: cpu_opp_table { @@ -758,11 +805,13 @@ }; }; - tsens: thermal-sensor@4a8000 { + tsens: thermal-sensor@4a9000 { compatible = "qcom,msm8916-tsens"; - reg = <0x4a8000 0x2000>; + reg = <0x4a9000 0x1000>, /* TM */ + <0x4a8000 0x1000>; /* SROT */ nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; nvmem-cell-names = "calib", "calib_sel"; + #qcom,sensors = <5>; #thermal-sensor-cells = <1>; }; @@ -778,6 +827,13 @@ clock-names = "iface", "bus"; qcom,iommu-secure-id = <17>; + // vfe: + iommu-ctx@3000 { + compatible = "qcom,msm-iommu-v1-sec"; + reg = <0x3000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + }; + // mdp_0: iommu-ctx@4000 { compatible = "qcom,msm-iommu-v1-ns"; @@ -1389,6 +1445,86 @@ compatible = "venus-encoder"; }; }; + + camss: camss@1b00000 { + compatible = "qcom,msm8916-camss"; + reg = <0x1b0ac00 0x200>, + <0x1b00030 0x4>, + <0x1b0b000 0x200>, + <0x1b00038 0x4>, + <0x1b08000 0x100>, + <0x1b08400 0x100>, + <0x1b0a000 0x500>, + <0x1b00020 0x10>, + <0x1b10000 0x1000>; + reg-names = "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csid0", + "csid1", + "ispif", + "csi_clk_mux", + "vfe0"; + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csiphy0", + "csiphy1", + "csid0", + "csid1", + "ispif", + "vfe0"; + power-domains = <&gcc VFE_GDSC>; + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_ISPIF_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI0_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0_CLK>, + <&gcc GCC_CAMSS_CSI0PHY_CLK>, + <&gcc GCC_CAMSS_CSI0PIX_CLK>, + <&gcc GCC_CAMSS_CSI0RDI_CLK>, + <&gcc GCC_CAMSS_CSI1_AHB_CLK>, + <&gcc GCC_CAMSS_CSI1_CLK>, + <&gcc GCC_CAMSS_CSI1PHY_CLK>, + <&gcc GCC_CAMSS_CSI1PIX_CLK>, + <&gcc GCC_CAMSS_CSI1RDI_CLK>, + <&gcc GCC_CAMSS_AHB_CLK>, + <&gcc GCC_CAMSS_VFE0_CLK>, + <&gcc GCC_CAMSS_CSI_VFE0_CLK>, + <&gcc GCC_CAMSS_VFE_AHB_CLK>, + <&gcc GCC_CAMSS_VFE_AXI_CLK>; + clock-names = "top_ahb", + "ispif_ahb", + "csiphy0_timer", + "csiphy1_timer", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "ahb", + "vfe0", + "csi_vfe0", + "vfe_ahb", + "vfe_axi"; + vdda-supply = <&pm8916_l2>; + iommus = <&apps_iommu 3>; + status = "disabled"; + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; smd { diff --git a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi index c5c42e94f387..8d5114d16d09 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi @@ -495,4 +495,124 @@ bias-disable; }; }; + + cci0_default: cci0_default { + pinmux { + function = "cci_i2c"; + pins = "gpio17", "gpio18"; + }; + pinconf { + pins = "gpio17", "gpio18"; + drive-strength = <16>; + bias-disable; + }; + }; + + cci1_default: cci1_default { + pinmux { + function = "cci_i2c"; + pins = "gpio19", "gpio20"; + }; + pinconf { + pins = "gpio19", "gpio20"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera_board_default: camera_board_default { + mux_pwdn { + function = "gpio"; + pins = "gpio98"; + }; + config_pwdn { + pins = "gpio98"; + drive-strength = <16>; + bias-disable; + }; + + mux_rst { + function = "gpio"; + pins = "gpio104"; + }; + config_rst { + pins = "gpio104"; + drive-strength = <16>; + bias-disable; + }; + + mux_mclk1 { + function = "cam_mclk"; + pins = "gpio14"; + }; + config_mclk1 { + pins = "gpio14"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera_front_default: camera_front_default { + mux_pwdn { + function = "gpio"; + pins = "gpio133"; + }; + config_pwdn { + pins = "gpio133"; + drive-strength = <16>; + bias-disable; + }; + + mux_rst { + function = "gpio"; + pins = "gpio23"; + }; + config_rst { + pins = "gpio23"; + drive-strength = <16>; + bias-disable; + }; + + mux_mclk2 { + function = "cam_mclk"; + pins = "gpio15"; + }; + config_mclk2 { + pins = "gpio15"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera_rear_default: camera_rear_default { + mux_pwdn { + function = "gpio"; + pins = "gpio26"; + }; + config_pwdn { + pins = "gpio26"; + drive-strength = <16>; + bias-disable; + }; + + mux_rst { + function = "gpio"; + pins = "gpio25"; + }; + config_rst { + pins = "gpio25"; + drive-strength = <16>; + bias-disable; + }; + + mux_mclk0 { + function = "cam_mclk"; + pins = "gpio13"; + }; + config_mclk0 { + pins = "gpio13"; + drive-strength = <16>; + bias-disable; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index b29fe80d7288..99b7495455a6 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -370,6 +370,13 @@ reg = <0x68000 0x6000>; }; + rng: rng@83000 { + compatible = "qcom,prng-ee"; + reg = <0x00083000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + tcsr_mutex_regs: syscon@740000 { compatible = "syscon"; reg = <0x740000 0x20000>; @@ -886,8 +893,9 @@ status = "disabled"; }; - usb2: usb@7600000 { - compatible = "qcom,dwc3"; + usb2: usb@76f8800 { + compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; + reg = <0x76f8800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -914,8 +922,9 @@ }; }; - usb3: usb@6a00000 { - compatible = "qcom,dwc3"; + usb3: usb@6af8800 { + compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; + reg = <0x6af8800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -943,6 +952,158 @@ }; }; + vfe_smmu: arm,smmu@da0000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0xda0000 0x10000>; + + #global-interrupts = <1>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&mmcc MMAGIC_CAMSS_GDSC>; + clocks = <&mmcc SMMU_VFE_AHB_CLK>, + <&mmcc SMMU_VFE_AXI_CLK>; + clock-names = "iface", + "bus"; + #iommu-cells = <1>; + status = "ok"; + }; + + camss: camss@a00000 { + compatible = "qcom,msm8996-camss"; + reg = <0xa34000 0x1000>, + <0xa00030 0x4>, + <0xa35000 0x1000>, + <0xa00038 0x4>, + <0xa36000 0x1000>, + <0xa00040 0x4>, + <0xa30000 0x100>, + <0xa30400 0x100>, + <0xa30800 0x100>, + <0xa30c00 0x100>, + <0xa31000 0x500>, + <0xa00020 0x10>, + <0xa10000 0x1000>, + <0xa14000 0x1000>; + reg-names = "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csiphy2", + "csiphy2_clk_mux", + "csid0", + "csid1", + "csid2", + "csid3", + "ispif", + "csi_clk_mux", + "vfe0", + "vfe1"; + interrupts = <GIC_SPI 78 0>, + <GIC_SPI 79 0>, + <GIC_SPI 80 0>, + <GIC_SPI 296 0>, + <GIC_SPI 297 0>, + <GIC_SPI 298 0>, + <GIC_SPI 299 0>, + <GIC_SPI 309 0>, + <GIC_SPI 314 0>, + <GIC_SPI 315 0>; + interrupt-names = "csiphy0", + "csiphy1", + "csiphy2", + "csid0", + "csid1", + "csid2", + "csid3", + "ispif", + "vfe0", + "vfe1"; + power-domains = <&mmcc VFE0_GDSC>; + clocks = <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_ISPIF_AHB_CLK>, + <&mmcc CAMSS_CSI0PHYTIMER_CLK>, + <&mmcc CAMSS_CSI1PHYTIMER_CLK>, + <&mmcc CAMSS_CSI2PHYTIMER_CLK>, + <&mmcc CAMSS_CSI0_AHB_CLK>, + <&mmcc CAMSS_CSI0_CLK>, + <&mmcc CAMSS_CSI0PHY_CLK>, + <&mmcc CAMSS_CSI0PIX_CLK>, + <&mmcc CAMSS_CSI0RDI_CLK>, + <&mmcc CAMSS_CSI1_AHB_CLK>, + <&mmcc CAMSS_CSI1_CLK>, + <&mmcc CAMSS_CSI1PHY_CLK>, + <&mmcc CAMSS_CSI1PIX_CLK>, + <&mmcc CAMSS_CSI1RDI_CLK>, + <&mmcc CAMSS_CSI2_AHB_CLK>, + <&mmcc CAMSS_CSI2_CLK>, + <&mmcc CAMSS_CSI2PHY_CLK>, + <&mmcc CAMSS_CSI2PIX_CLK>, + <&mmcc CAMSS_CSI2RDI_CLK>, + <&mmcc CAMSS_CSI3_AHB_CLK>, + <&mmcc CAMSS_CSI3_CLK>, + <&mmcc CAMSS_CSI3PHY_CLK>, + <&mmcc CAMSS_CSI3PIX_CLK>, + <&mmcc CAMSS_CSI3RDI_CLK>, + <&mmcc CAMSS_AHB_CLK>, + <&mmcc CAMSS_VFE0_CLK>, + <&mmcc CAMSS_CSI_VFE0_CLK>, + <&mmcc CAMSS_VFE0_AHB_CLK>, + <&mmcc CAMSS_VFE0_STREAM_CLK>, + <&mmcc CAMSS_VFE1_CLK>, + <&mmcc CAMSS_CSI_VFE1_CLK>, + <&mmcc CAMSS_VFE1_AHB_CLK>, + <&mmcc CAMSS_VFE1_STREAM_CLK>, + <&mmcc CAMSS_VFE_AHB_CLK>, + <&mmcc CAMSS_VFE_AXI_CLK>; + clock-names = "top_ahb", + "ispif_ahb", + "csiphy0_timer", + "csiphy1_timer", + "csiphy2_timer", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "csi2_ahb", + "csi2", + "csi2_phy", + "csi2_pix", + "csi2_rdi", + "csi3_ahb", + "csi3", + "csi3_phy", + "csi3_pix", + "csi3_rdi", + "ahb", + "vfe0", + "csi_vfe0", + "vfe0_ahb", + "vfe0_stream", + "vfe1", + "csi_vfe1", + "vfe1_ahb", + "vfe1_stream", + "vfe_ahb", + "vfe_axi"; + vdda-supply = <&pm8994_l2>; + iommus = <&vfe_smmu 0>, + <&vfe_smmu 1>, + <&vfe_smmu 2>, + <&vfe_smmu 3>; + status = "disabled"; + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + agnoc@0 { power-domains = <&gcc AGGRE0_NOC_GDSC>; compatible = "simple-pm-bus"; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index 11fd1fe8bdb5..50e9033aa7f6 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -245,3 +245,15 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; }; + +&sdhc2 { + status = "okay"; + cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi new file mode 100644 index 000000000000..6db70acd38ee --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */ + +&tlmm { + sdc2_clk_on: sdc2_clk_on { + config { + pins = "sdc2_clk"; + bias-disable; /* NO pull */ + drive-strength = <16>; /* 16 mA */ + }; + }; + + sdc2_clk_off: sdc2_clk_off { + config { + pins = "sdc2_clk"; + bias-disable; /* NO pull */ + drive-strength = <2>; /* 2 mA */ + }; + }; + + sdc2_cmd_on: sdc2_cmd_on { + config { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <10>; /* 10 mA */ + }; + }; + + sdc2_cmd_off: sdc2_cmd_off { + config { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 mA */ + }; + }; + + sdc2_data_on: sdc2_data_on { + config { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <10>; /* 10 mA */ + }; + }; + + sdc2_data_off: sdc2_data_off { + config { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 mA */ + }; + }; + + sdc2_cd_on: sdc2_cd_on { + mux { + pins = "gpio95"; + function = "gpio"; + }; + + config { + pins = "gpio95"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 mA */ + }; + }; + + sdc2_cd_off: sdc2_cd_off { + mux { + pins = "gpio95"; + function = "gpio"; + }; + + config { + pins = "gpio95"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 mA */ + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 78227cce16db..8d41b69ec2da 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8998.h> +#include <dt-bindings/gpio/gpio.h> / { interrupt-parent = <&intc>; @@ -53,10 +54,11 @@ }; clocks { - xo_board { + xo: xo-board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; + clock-output-names = "xo_board"; }; sleep_clk { @@ -239,7 +241,7 @@ firmware { scm { - compatible = "qcom,scm-msm8998"; + compatible = "qcom,scm-msm8998", "qcom,scm"; }; }; @@ -605,6 +607,23 @@ #mbox-cells = <1>; }; + sdhc2: sdhci@c0a4900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xc0a4900 0x314>, <0xc0a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clock-names = "iface", "core", "xo"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo>; + bus-width = <4>; + status = "disabled"; + }; + blsp2_uart1: serial@c1b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xc1b0000 0x1000>; @@ -688,3 +707,5 @@ }; }; }; + +#include "msm8998-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 048f19fa0150..f1025a50c227 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -75,6 +75,11 @@ #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; + + adc-chan@ADC5_DIE_TEMP { + reg = <ADC5_DIE_TEMP>; + label = "die_temp"; + }; }; rtc@6000 { diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi new file mode 100644 index 000000000000..ad2b62dfc9f6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, Linaro Limited + +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/input/linux-event-codes.h> + +&spmi_bus { + pms405_0: pms405@0 { + compatible = "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pms405_gpios: gpio@c000 { + compatible = "qcom,pms405-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>, + <0 0xc4 0 IRQ_TYPE_NONE>, + <0 0xc5 0 IRQ_TYPE_NONE>, + <0 0xc6 0 IRQ_TYPE_NONE>, + <0 0xc7 0 IRQ_TYPE_NONE>, + <0 0xc8 0 IRQ_TYPE_NONE>, + <0 0xc9 0 IRQ_TYPE_NONE>, + <0 0xca 0 IRQ_TYPE_NONE>, + <0 0xcb 0 IRQ_TYPE_NONE>; + }; + + pon@800 { + compatible = "qcom,pms405-pon"; + reg = <0x0800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts new file mode 100644 index 000000000000..2c14903d808e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, Linaro Limited + +/dts-v1/; + +#include "qcs404-evb.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QCS404 EVB 1000"; + compatible = "qcom,qcs404-evb"; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts new file mode 100644 index 000000000000..11269ad3de0d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, Linaro Limited + +/dts-v1/; + +#include "qcs404-evb.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QCS404 EVB 4000"; + compatible = "qcom,qcs404-evb"; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi new file mode 100644 index 000000000000..a39924efebe4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, Linaro Limited + +#include "qcs404.dtsi" +#include "pms405.dtsi" + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&remoteproc_adsp { + status = "ok"; +}; + +&remoteproc_cdsp { + status = "ok"; +}; + +&remoteproc_wcss { + status = "ok"; +}; + +&rpm_requests { + pms405-regulators { + compatible = "qcom,rpm-pms405-regulators"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-l1-l2-supply = <&vreg_s5_1p35>; + vdd-l3-l8-supply = <&vreg_s5_1p35>; + vdd-l4-supply = <&vreg_s5_1p35>; + vdd-l5-l6-supply = <&vreg_s4_1p8>; + vdd-l7-supply = <&vph_pwr>; + vdd-l9-supply = <&vreg_s5_1p35>; + vdd-l10-l11-l12-l13-supply = <&vph_pwr>; + + vreg_s4_1p8: s4 { + regulator-min-microvolt = <1728000>; + regulator-max-microvolt = <1920000>; + }; + + vreg_s5_1p35: s5 { + regulator-min-microvolt = <>; + regulator-max-microvolt = <>; + }; + + vreg_l1_1p3: l1 { + regulator-min-microvolt = <1240000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l2_1p275: l2 { + regulator-min-microvolt = <1048000>; + regulator-max-microvolt = <1280000>; + }; + + vreg_l3_1p05: l3 { + regulator-min-microvolt = <976000>; + regulator-max-microvolt = <1160000>; + }; + + vreg_l4_1p2: l4 { + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1256000>; + }; + + vreg_l5_1p8: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l6_1p8: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vreg_l7_1p8: l7 { + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <3000000>; + }; + + vreg_l8_1p2: l8 { + regulator-min-microvolt = <1136000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l10_3p3: l10 { + regulator-min-microvolt = <2936000>; + regulator-max-microvolt = <3088000>; + }; + + vreg_l11_sdc2: l11 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l12_3p3: l12 { + regulator-min-microvolt = <2968000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_l13_3p3: l13 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + }; +}; + +&sdcc1 { + status = "ok"; + + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&tlmm { + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + dreive-strength = <10>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_off: sdc1-off { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + dreive-strength = <2>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi new file mode 100644 index 000000000000..9b5c16562bbe --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -0,0 +1,490 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, Linaro Limited + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-qcs404.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x101>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x102>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x103>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-qcs404", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + remoteproc_adsp: remoteproc-adsp { + compatible = "qcom,qcs404-adsp-pas"; + + interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&adsp_fw_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; + + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + + label = "adsp"; + }; + }; + + remoteproc_cdsp: remoteproc-cdsp { + compatible = "qcom,qcs404-cdsp-pas"; + + interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&cdsp_fw_mem>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; + + qcom,remote-pid = <5>; + mboxes = <&apcs_glb 12>; + + label = "cdsp"; + }; + }; + + remoteproc_wcss: remoteproc-wcss { + compatible = "qcom,qcs404-wcss-pas"; + + interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&wlan_fw_mem>; + + qcom,smem-states = <&wcss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 16>; + + label = "wcss"; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + memory@85600000 { + reg = <0 0x85600000 0 0x90000>; + no-map; + }; + + smem_region: memory@85f00000 { + reg = <0 0x85f00000 0 0x200000>; + no-map; + }; + + memory@86100000 { + reg = <0 0x86100000 0 0x300000>; + no-map; + }; + + wlan_fw_mem: memory@86400000 { + reg = <0 0x86400000 0 0x1c00000>; + no-map; + }; + + adsp_fw_mem: memory@88000000 { + reg = <0 0x88000000 0 0x1a00000>; + no-map; + }; + + cdsp_fw_mem: memory@89a00000 { + reg = <0 0x89a00000 0 0x600000>; + no-map; + }; + + wlan_msa_mem: memory@8a000000 { + reg = <0 0x8a000000 0 0x100000>; + no-map; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: glink-channel { + compatible = "qcom,rpm-qcs404"; + qcom,glink-channels = "rpm_requests"; + }; + }; + + smem { + compatible = "qcom,smem"; + + memory-region = <&smem_region>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + + hwlocks = <&tcsr_mutex 3>; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + rpm_msg_ram: memory@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x6000>; + }; + + rng: rng@e3000 { + compatible = "qcom,prng-ee"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,qcs404-pinctrl"; + reg = <0x01000000 0x200000>, + <0x01300000 0x200000>, + <0x07b00000 0x200000>; + reg-names = "south", "north", "east"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 120>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-qcs404"; + reg = <0x01800000 0x80000>; + #clock-cells = <1>; + + assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>; + assigned-clock-rates = <19200000>; + }; + + tcsr_mutex_regs: syscon@1905000 { + compatible = "syscon"; + reg = <0x01905000 0x20000>; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x800000>, + <0x02c00000 0x800000>, + <0x03800000 0x200000>, + <0x0200a000 0x002100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + sdcc1: sdcc@7804000 { + compatible = "qcom,sdhci-msm-v5"; + reg = <0x07804000 0x1000>, <0x7805000 0x1000>; + reg-names = "hc_mem", "cmdq_mem"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + + status = "disabled"; + }; + + blsp1_dma: dma@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x25000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,controlled-remotely = <1>; + qcom,ee = <0>; + status = "okay"; + }; + + blsp1_uart2: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b1000 0x200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 5>, <&blsp1_dma 4>; + dma-names = "rx", "tx"; + status = "okay"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, + <0x0b002000 0x1000>; + }; + + apcs_glb: mailbox@b011000 { + compatible = "qcom,qcs404-apcs-apps-global", "syscon"; + reg = <0x0b011000 0x1000>; + #mbox-cells = <1>; + }; + + timer@b120000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + clock-frequency = <19200000>; + + frame@b121000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + }; + + frame@b123000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b123000 0x1000>; + status = "disabled"; + }; + + frame@b124000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b124000 0x1000>; + status = "disabled"; + }; + + frame@b125000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b125000 0x1000>; + status = "disabled"; + }; + + frame@b126000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b126000 0x1000>; + status = "disabled"; + }; + + frame@b127000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb127000 0x1000>; + status = "disabled"; + }; + + frame@b128000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b128000 0x1000>; + status = "disabled"; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 0xff08>, + <GIC_PPI 3 0xff08>, + <GIC_PPI 4 0xff08>, + <GIC_PPI 1 0xff08>; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs_glb 10>; + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs_glb 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wcss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs_glb 18>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + wcss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + wcss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index b72bdb0a31a5..c27cbd3bcb0a 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/phy/phy-qcom-qusb2.h> #include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/clock/qcom,gcc-sdm845.h> / { interrupt-parent = <&intc>; @@ -357,6 +358,13 @@ }; }; + rng: rng@793000 { + compatible = "qcom,prng-ee"; + reg = <0x00793000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x8c0000 0x6000>; @@ -394,6 +402,17 @@ status = "disabled"; }; + uart0: serial@880000 { + compatible = "qcom,geni-uart"; + reg = <0x880000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c1: i2c@884000 { compatible = "qcom,geni-i2c"; reg = <0x884000 0x4000>; @@ -420,6 +439,17 @@ status = "disabled"; }; + uart1: serial@884000 { + compatible = "qcom,geni-uart"; + reg = <0x884000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c2: i2c@888000 { compatible = "qcom,geni-i2c"; reg = <0x888000 0x4000>; @@ -446,6 +476,17 @@ status = "disabled"; }; + uart2: serial@888000 { + compatible = "qcom,geni-uart"; + reg = <0x888000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c3: i2c@88c000 { compatible = "qcom,geni-i2c"; reg = <0x88c000 0x4000>; @@ -472,6 +513,17 @@ status = "disabled"; }; + uart3: serial@88c000 { + compatible = "qcom,geni-uart"; + reg = <0x88c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c4: i2c@890000 { compatible = "qcom,geni-i2c"; reg = <0x890000 0x4000>; @@ -498,6 +550,17 @@ status = "disabled"; }; + uart4: serial@890000 { + compatible = "qcom,geni-uart"; + reg = <0x890000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c5: i2c@894000 { compatible = "qcom,geni-i2c"; reg = <0x894000 0x4000>; @@ -524,6 +587,17 @@ status = "disabled"; }; + uart5: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0x894000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c6: i2c@898000 { compatible = "qcom,geni-i2c"; reg = <0x898000 0x4000>; @@ -550,6 +624,17 @@ status = "disabled"; }; + uart6: serial@898000 { + compatible = "qcom,geni-uart"; + reg = <0x898000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c7: i2c@89c000 { compatible = "qcom,geni-i2c"; reg = <0x89c000 0x4000>; @@ -575,6 +660,17 @@ #size-cells = <0>; status = "disabled"; }; + + uart7: serial@89c000 { + compatible = "qcom,geni-uart"; + reg = <0x89c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_default>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; }; qupv3_id_1: geniqup@ac0000 { @@ -614,6 +710,17 @@ status = "disabled"; }; + uart8: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0xa80000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart8_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c9: i2c@a84000 { compatible = "qcom,geni-i2c"; reg = <0xa84000 0x4000>; @@ -677,6 +784,17 @@ status = "disabled"; }; + uart10: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0xa88000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart10_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c11: i2c@a8c000 { compatible = "qcom,geni-i2c"; reg = <0xa8c000 0x4000>; @@ -703,6 +821,17 @@ status = "disabled"; }; + uart11: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0xa8c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart11_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c12: i2c@a90000 { compatible = "qcom,geni-i2c"; reg = <0xa90000 0x4000>; @@ -729,6 +858,17 @@ status = "disabled"; }; + uart12: serial@a90000 { + compatible = "qcom,geni-uart"; + reg = <0xa90000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart12_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c13: i2c@a94000 { compatible = "qcom,geni-i2c"; reg = <0xa94000 0x4000>; @@ -755,6 +895,17 @@ status = "disabled"; }; + uart13: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0xa94000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart13_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c14: i2c@a98000 { compatible = "qcom,geni-i2c"; reg = <0xa98000 0x4000>; @@ -781,6 +932,17 @@ status = "disabled"; }; + uart14: serial@a98000 { + compatible = "qcom,geni-uart"; + reg = <0xa98000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart14_default>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c15: i2c@a9c000 { compatible = "qcom,geni-i2c"; reg = <0xa9c000 0x4000>; @@ -806,6 +968,17 @@ #size-cells = <0>; status = "disabled"; }; + + uart15: serial@a9c000 { + compatible = "qcom,geni-uart"; + reg = <0xa9c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart15_default>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; }; tcsr_mutex_regs: syscon@1f40000 { @@ -1062,12 +1235,117 @@ }; }; + qup_uart0_default: qup-uart0-default { + pinmux { + pins = "gpio2", "gpio3"; + function = "qup0"; + }; + }; + + qup_uart1_default: qup-uart1-default { + pinmux { + pins = "gpio19", "gpio20"; + function = "qup1"; + }; + }; + + qup_uart2_default: qup-uart2-default { + pinmux { + pins = "gpio29", "gpio30"; + function = "qup2"; + }; + }; + + qup_uart3_default: qup-uart3-default { + pinmux { + pins = "gpio43", "gpio44"; + function = "qup3"; + }; + }; + + qup_uart4_default: qup-uart4-default { + pinmux { + pins = "gpio91", "gpio92"; + function = "qup4"; + }; + }; + + qup_uart5_default: qup-uart5-default { + pinmux { + pins = "gpio87", "gpio88"; + function = "qup5"; + }; + }; + + qup_uart6_default: qup-uart6-default { + pinmux { + pins = "gpio47", "gpio48"; + function = "qup6"; + }; + }; + + qup_uart7_default: qup-uart7-default { + pinmux { + pins = "gpio95", "gpio96"; + function = "qup7"; + }; + }; + + qup_uart8_default: qup-uart8-default { + pinmux { + pins = "gpio67", "gpio68"; + function = "qup8"; + }; + }; + qup_uart9_default: qup-uart9-default { pinmux { pins = "gpio4", "gpio5"; function = "qup9"; }; }; + + qup_uart10_default: qup-uart10-default { + pinmux { + pins = "gpio53", "gpio54"; + function = "qup10"; + }; + }; + + qup_uart11_default: qup-uart11-default { + pinmux { + pins = "gpio33", "gpio34"; + function = "qup11"; + }; + }; + + qup_uart12_default: qup-uart12-default { + pinmux { + pins = "gpio51", "gpio52"; + function = "qup12"; + }; + }; + + qup_uart13_default: qup-uart13-default { + pinmux { + pins = "gpio107", "gpio108"; + function = "qup13"; + }; + }; + + qup_uart14_default: qup-uart14-default { + pinmux { + pins = "gpio31", "gpio32"; + function = "qup14"; + }; + }; + + qup_uart15_default: qup-uart15-default { + pinmux { + pins = "gpio83", "gpio84"; + function = "qup15"; + }; + }; }; usb_1_hsphy: phy@88e2000 { @@ -1404,4 +1682,174 @@ }; }; }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu_alert4: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit4: trip1 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu_alert5: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit5: trip1 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu_alert6: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit6: trip1 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu_alert7: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit7: trip1 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index 012cbb64246e..20745a8528c5 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -7,7 +7,8 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/clock/renesas-cpg-mssr.h> +#include <dt-bindings/clock/r8a774a1-cpg-mssr.h> +#include <dt-bindings/power/r8a774a1-sysc.h> / { compatible = "renesas,r8a774a1"; @@ -63,72 +64,72 @@ compatible = "arm,cortex-a57", "arm,armv8"; reg = <0x0>; device_type = "cpu"; - power-domains = <&sysc 0>; + power-domains = <&sysc R8A774A1_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks = <&cpg CPG_CORE 0>; + clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>; }; a57_1: cpu@1 { compatible = "arm,cortex-a57", "arm,armv8"; reg = <0x1>; device_type = "cpu"; - power-domains = <&sysc 1>; + power-domains = <&sysc R8A774A1_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks = <&cpg CPG_CORE 0>; + clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>; }; a53_0: cpu@100 { compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x100>; device_type = "cpu"; - power-domains = <&sysc 5>; + power-domains = <&sysc R8A774A1_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE 1>; + clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; }; a53_1: cpu@101 { compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x101>; device_type = "cpu"; - power-domains = <&sysc 6>; + power-domains = <&sysc R8A774A1_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE 1>; + clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; }; a53_2: cpu@102 { compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x102>; device_type = "cpu"; - power-domains = <&sysc 7>; + power-domains = <&sysc R8A774A1_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE 1>; + clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; }; a53_3: cpu@103 { compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x103>; device_type = "cpu"; - power-domains = <&sysc 8>; + power-domains = <&sysc R8A774A1_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE 1>; + clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; }; L2_CA57: cache-controller-0 { compatible = "cache"; - power-domains = <&sysc 12>; + power-domains = <&sysc R8A774A1_PD_CA57_SCU>; cache-unified; cache-level = <2>; }; L2_CA53: cache-controller-1 { compatible = "cache"; - power-domains = <&sysc 21>; + power-domains = <&sysc R8A774A1_PD_CA53_SCU>; cache-unified; cache-level = <2>; }; @@ -195,7 +196,7 @@ "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; clocks = <&cpg CPG_MOD 402>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 402>; status = "disabled"; }; @@ -211,7 +212,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 912>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 912>; }; @@ -226,7 +227,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 911>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 911>; }; @@ -241,7 +242,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 910>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 910>; }; @@ -256,7 +257,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 909>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 909>; }; @@ -271,7 +272,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 908>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 908>; }; @@ -286,7 +287,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 907>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 907>; }; @@ -301,7 +302,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 906>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 906>; }; @@ -316,7 +317,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 905>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 905>; }; @@ -355,7 +356,7 @@ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 522>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 522>; #thermal-sensor-cells = <1>; }; @@ -372,7 +373,7 @@ GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 407>; }; @@ -384,7 +385,7 @@ reg = <0 0xe6500000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 931>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 931>; dmas = <&dmac1 0x91>, <&dmac1 0x90>, <&dmac2 0x91>, <&dmac2 0x90>; @@ -401,7 +402,7 @@ reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 930>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 930>; dmas = <&dmac1 0x93>, <&dmac1 0x92>, <&dmac2 0x93>, <&dmac2 0x92>; @@ -418,7 +419,7 @@ reg = <0 0xe6510000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 929>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 929>; dmas = <&dmac1 0x95>, <&dmac1 0x94>, <&dmac2 0x95>, <&dmac2 0x94>; @@ -435,7 +436,7 @@ reg = <0 0xe66d0000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 928>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 928>; dmas = <&dmac0 0x97>, <&dmac0 0x96>; dma-names = "tx", "rx"; @@ -451,7 +452,7 @@ reg = <0 0xe66d8000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 927>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 927>; dmas = <&dmac0 0x99>, <&dmac0 0x98>; dma-names = "tx", "rx"; @@ -467,7 +468,7 @@ reg = <0 0xe66e0000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 919>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 919>; dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; dma-names = "tx", "rx"; @@ -483,7 +484,7 @@ reg = <0 0xe66e8000 0 0x40>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 918>; dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; dma-names = "tx", "rx"; @@ -500,7 +501,7 @@ reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 926>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 926>; dmas = <&dmac0 0x11>, <&dmac0 0x10>; dma-names = "tx", "rx"; @@ -514,13 +515,13 @@ reg = <0 0xe6540000 0 0x60>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 520>, - <&cpg CPG_CORE 19>, + <&cpg CPG_CORE R8A774A1_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x31>, <&dmac1 0x30>, <&dmac2 0x31>, <&dmac2 0x30>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 520>; status = "disabled"; }; @@ -532,13 +533,13 @@ reg = <0 0xe6550000 0 0x60>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 519>, - <&cpg CPG_CORE 19>, + <&cpg CPG_CORE R8A774A1_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 519>; status = "disabled"; }; @@ -550,13 +551,13 @@ reg = <0 0xe6560000 0 0x60>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 518>, - <&cpg CPG_CORE 19>, + <&cpg CPG_CORE R8A774A1_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x35>, <&dmac1 0x34>, <&dmac2 0x35>, <&dmac2 0x34>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 518>; status = "disabled"; }; @@ -568,12 +569,12 @@ reg = <0 0xe66a0000 0 0x60>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 517>, - <&cpg CPG_CORE 19>, + <&cpg CPG_CORE R8A774A1_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x37>, <&dmac0 0x36>; dma-names = "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 517>; status = "disabled"; }; @@ -585,12 +586,12 @@ reg = <0 0xe66b0000 0 0x60>; interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 516>, - <&cpg CPG_CORE 19>, + <&cpg CPG_CORE R8A774A1_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x38>; dma-names = "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 516>; status = "disabled"; }; @@ -607,7 +608,7 @@ renesas,buswait = <11>; phys = <&usb2_phy0>; phy-names = "usb"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 704>; status = "disabled"; }; @@ -620,7 +621,7 @@ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 330>; #dma-cells = <1>; dma-channels = <2>; @@ -634,7 +635,7 @@ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 331>; #dma-cells = <1>; dma-channels = <2>; @@ -647,7 +648,7 @@ clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal_clk>; clock-names = "usb3-if", "usb3s_clk", "usb_extal"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 328>; #phy-cells = <0>; status = "disabled"; @@ -681,7 +682,7 @@ "ch12", "ch13", "ch14", "ch15"; clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <16>; @@ -715,7 +716,7 @@ "ch12", "ch13", "ch14", "ch15"; clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; @@ -749,7 +750,7 @@ "ch12", "ch13", "ch14", "ch15"; clocks = <&cpg CPG_MOD 217>; clock-names = "fck"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; @@ -759,7 +760,7 @@ compatible = "renesas,ipmmu-r8a774a1"; reg = <0 0xe6740000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 0>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -767,7 +768,7 @@ compatible = "renesas,ipmmu-r8a774a1"; reg = <0 0xe7740000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 1>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -775,7 +776,7 @@ compatible = "renesas,ipmmu-r8a774a1"; reg = <0 0xe6570000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 2>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -784,7 +785,7 @@ reg = <0 0xe67b0000 0 0x1000>; interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -792,7 +793,7 @@ compatible = "renesas,ipmmu-r8a774a1"; reg = <0 0xec670000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 4>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -800,7 +801,7 @@ compatible = "renesas,ipmmu-r8a774a1"; reg = <0 0xfd800000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 5>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -808,7 +809,7 @@ compatible = "renesas,ipmmu-r8a774a1"; reg = <0 0xfd950000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 6>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -816,7 +817,7 @@ compatible = "renesas,ipmmu-r8a774a1"; reg = <0 0xfe6b0000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 8>; - power-domains = <&sysc 14>; + power-domains = <&sysc R8A774A1_PD_A3VC>; #iommu-cells = <1>; }; @@ -824,7 +825,7 @@ compatible = "renesas,ipmmu-r8a774a1"; reg = <0 0xfebd0000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 9>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -865,7 +866,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; #address-cells = <1>; @@ -873,13 +874,37 @@ status = "disabled"; }; + can0: can@e6c30000 { + compatible = "renesas,can-r8a774a1", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c30000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, <&can_clk>; + clock-names = "clkp1", "can_clk"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6c38000 { + compatible = "renesas,can-r8a774a1", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c38000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, <&can_clk>; + clock-names = "clkp1", "can_clk"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 0x8>; #pwm-cells = <2>; clocks = <&cpg CPG_MOD 523>; resets = <&cpg 523>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; status = "disabled"; }; @@ -889,7 +914,7 @@ #pwm-cells = <2>; clocks = <&cpg CPG_MOD 523>; resets = <&cpg 523>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; status = "disabled"; }; @@ -899,7 +924,7 @@ #pwm-cells = <2>; clocks = <&cpg CPG_MOD 523>; resets = <&cpg 523>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; status = "disabled"; }; @@ -909,7 +934,7 @@ #pwm-cells = <2>; clocks = <&cpg CPG_MOD 523>; resets = <&cpg 523>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; status = "disabled"; }; @@ -919,7 +944,7 @@ #pwm-cells = <2>; clocks = <&cpg CPG_MOD 523>; resets = <&cpg 523>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; status = "disabled"; }; @@ -929,7 +954,7 @@ #pwm-cells = <2>; clocks = <&cpg CPG_MOD 523>; resets = <&cpg 523>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; status = "disabled"; }; @@ -939,7 +964,7 @@ #pwm-cells = <2>; clocks = <&cpg CPG_MOD 523>; resets = <&cpg 523>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; status = "disabled"; }; @@ -949,13 +974,13 @@ reg = <0 0xe6e60000 0 0x40>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 207>, - <&cpg CPG_CORE 19>, + <&cpg CPG_CORE R8A774A1_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x51>, <&dmac1 0x50>, <&dmac2 0x51>, <&dmac2 0x50>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 207>; status = "disabled"; }; @@ -966,13 +991,13 @@ reg = <0 0xe6e68000 0 0x40>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 206>, - <&cpg CPG_CORE 19>, + <&cpg CPG_CORE R8A774A1_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x53>, <&dmac1 0x52>, <&dmac2 0x53>, <&dmac2 0x52>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 206>; status = "disabled"; }; @@ -983,10 +1008,10 @@ reg = <0 0xe6e88000 0 0x40>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 310>, - <&cpg CPG_CORE 19>, + <&cpg CPG_CORE R8A774A1_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; }; @@ -997,12 +1022,12 @@ reg = <0 0xe6c50000 0 0x40>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 204>, - <&cpg CPG_CORE 19>, + <&cpg CPG_CORE R8A774A1_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x57>, <&dmac0 0x56>; dma-names = "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 204>; status = "disabled"; }; @@ -1013,12 +1038,12 @@ reg = <0 0xe6c40000 0 0x40>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 203>, - <&cpg CPG_CORE 19>, + <&cpg CPG_CORE R8A774A1_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x59>, <&dmac0 0x58>; dma-names = "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 203>; status = "disabled"; }; @@ -1029,13 +1054,13 @@ reg = <0 0xe6f30000 0 0x40>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 202>, - <&cpg CPG_CORE 19>, + <&cpg CPG_CORE R8A774A1_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, <&dmac2 0x5b>, <&dmac2 0x5a>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 202>; status = "disabled"; }; @@ -1049,7 +1074,7 @@ dmas = <&dmac1 0x41>, <&dmac1 0x40>, <&dmac2 0x41>, <&dmac2 0x40>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 211>; #address-cells = <1>; #size-cells = <0>; @@ -1065,7 +1090,7 @@ dmas = <&dmac1 0x43>, <&dmac1 0x42>, <&dmac2 0x43>, <&dmac2 0x42>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 210>; #address-cells = <1>; #size-cells = <0>; @@ -1080,7 +1105,7 @@ clocks = <&cpg CPG_MOD 209>; dmas = <&dmac0 0x45>, <&dmac0 0x44>; dma-names = "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 209>; #address-cells = <1>; #size-cells = <0>; @@ -1095,13 +1120,269 @@ clocks = <&cpg CPG_MOD 208>; dmas = <&dmac0 0x47>, <&dmac0 0x46>; dma-names = "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 208>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a774a1"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 811>; + renesas,id = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin0csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin0>; + }; + vin0csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin0>; + }; + }; + }; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a774a1"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 810>; + renesas,id = <1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin1csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin1>; + }; + vin1csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin1>; + }; + }; + }; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a774a1"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 809>; + renesas,id = <2>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin2csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin2>; + }; + vin2csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin2>; + }; + }; + }; + }; + + vin3: video@e6ef3000 { + compatible = "renesas,vin-r8a774a1"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 808>; + renesas,id = <3>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin3csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin3>; + }; + vin3csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin3>; + }; + }; + }; + }; + + vin4: video@e6ef4000 { + compatible = "renesas,vin-r8a774a1"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 807>; + renesas,id = <4>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin4csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin4>; + }; + vin4csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin4>; + }; + }; + }; + }; + + vin5: video@e6ef5000 { + compatible = "renesas,vin-r8a774a1"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 806>; + renesas,id = <5>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin5csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin5>; + }; + vin5csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin5>; + }; + }; + }; + }; + + vin6: video@e6ef6000 { + compatible = "renesas,vin-r8a774a1"; + reg = <0 0xe6ef6000 0 0x1000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 805>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 805>; + renesas,id = <6>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin6csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin6>; + }; + vin6csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin6>; + }; + }; + }; + }; + + vin7: video@e6ef7000 { + compatible = "renesas,vin-r8a774a1"; + reg = <0 0xe6ef7000 0 0x1000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 804>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 804>; + renesas,id = <7>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin7csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin7>; + }; + vin7csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin7>; + }; + }; + }; + }; + rcar_sound: sound@ec500000 { /* * #sound-dai-cells is required @@ -1139,7 +1420,7 @@ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, - <&cpg CPG_CORE 10>; + <&cpg CPG_CORE R8A774A1_CLK_S0D4>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", @@ -1151,7 +1432,7 @@ "ctu.1", "ctu.0", "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 1005>, <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>, @@ -1337,7 +1618,7 @@ "ch12", "ch13", "ch14", "ch15"; clocks = <&cpg CPG_MOD 502>; clock-names = "fck"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <16>; @@ -1371,7 +1652,7 @@ "ch12", "ch13", "ch14", "ch15"; clocks = <&cpg CPG_MOD 501>; clock-names = "fck"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 501>; #dma-cells = <1>; dma-channels = <16>; @@ -1383,7 +1664,7 @@ reg = <0 0xee000000 0 0xc00>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 328>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 328>; status = "disabled"; }; @@ -1394,7 +1675,7 @@ reg = <0 0xee020000 0 0x400>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 328>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 328>; status = "disabled"; }; @@ -1406,7 +1687,7 @@ clocks = <&cpg CPG_MOD 703>; phys = <&usb2_phy0>; phy-names = "usb"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 703>; status = "disabled"; }; @@ -1418,7 +1699,7 @@ clocks = <&cpg CPG_MOD 702>; phys = <&usb2_phy1>; phy-names = "usb"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 702>; status = "disabled"; }; @@ -1431,7 +1712,7 @@ phys = <&usb2_phy0>; phy-names = "usb"; companion = <&ohci0>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 703>; status = "disabled"; }; @@ -1444,7 +1725,7 @@ phys = <&usb2_phy1>; phy-names = "usb"; companion = <&ohci1>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 702>; status = "disabled"; }; @@ -1455,7 +1736,7 @@ reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 703>; #phy-cells = <0>; status = "disabled"; @@ -1466,7 +1747,7 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee0a0200 0 0x700>; clocks = <&cpg CPG_MOD 702>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 702>; #phy-cells = <0>; status = "disabled"; @@ -1479,7 +1760,7 @@ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 314>; max-frequency = <200000000>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 314>; status = "disabled"; }; @@ -1491,7 +1772,7 @@ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 313>; max-frequency = <200000000>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 313>; status = "disabled"; }; @@ -1503,7 +1784,7 @@ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 312>; max-frequency = <200000000>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 312>; status = "disabled"; }; @@ -1515,7 +1796,7 @@ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 311>; max-frequency = <200000000>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 311>; status = "disabled"; }; @@ -1533,7 +1814,7 @@ (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 408>; }; @@ -1541,7 +1822,7 @@ compatible = "renesas,fcpf"; reg = <0 0xfe950000 0 0x200>; clocks = <&cpg CPG_MOD 615>; - power-domains = <&sysc 14>; + power-domains = <&sysc R8A774A1_PD_A3VC>; resets = <&cpg 615>; }; @@ -1549,7 +1830,7 @@ compatible = "renesas,fcpv"; reg = <0 0xfe96f000 0 0x200>; clocks = <&cpg CPG_MOD 607>; - power-domains = <&sysc 14>; + power-domains = <&sysc R8A774A1_PD_A3VC>; resets = <&cpg 607>; }; @@ -1557,7 +1838,7 @@ compatible = "renesas,fcpv"; reg = <0 0xfea27000 0 0x200>; clocks = <&cpg CPG_MOD 603>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 603>; iommus = <&ipmmu_vi0 8>; }; @@ -1566,7 +1847,7 @@ compatible = "renesas,fcpv"; reg = <0 0xfea2f000 0 0x200>; clocks = <&cpg CPG_MOD 602>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 602>; iommus = <&ipmmu_vi0 9>; }; @@ -1575,7 +1856,7 @@ compatible = "renesas,fcpv"; reg = <0 0xfea37000 0 0x200>; clocks = <&cpg CPG_MOD 601>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 601>; iommus = <&ipmmu_vi0 10>; }; @@ -1584,11 +1865,122 @@ compatible = "renesas,fcpv"; reg = <0 0xfe9af000 0 0x200>; clocks = <&cpg CPG_MOD 611>; - power-domains = <&sysc 14>; + power-domains = <&sysc R8A774A1_PD_A3VC>; resets = <&cpg 611>; iommus = <&ipmmu_vc0 19>; }; + csi20: csi2@fea80000 { + compatible = "renesas,r8a774a1-csi2"; + reg = <0 0xfea80000 0 0x10000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 714>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi20vin0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin0csi20>; + }; + csi20vin1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin1csi20>; + }; + csi20vin2: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin2csi20>; + }; + csi20vin3: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin3csi20>; + }; + csi20vin4: endpoint@4 { + reg = <4>; + remote-endpoint = <&vin4csi20>; + }; + csi20vin5: endpoint@5 { + reg = <5>; + remote-endpoint = <&vin5csi20>; + }; + csi20vin6: endpoint@6 { + reg = <6>; + remote-endpoint = <&vin6csi20>; + }; + csi20vin7: endpoint@7 { + reg = <7>; + remote-endpoint = <&vin7csi20>; + }; + }; + }; + }; + + csi40: csi2@feaa0000 { + compatible = "renesas,r8a774a1-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin0csi40>; + }; + csi40vin1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin1csi40>; + }; + csi40vin2: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin2csi40>; + }; + csi40vin3: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin3csi40>; + }; + csi40vin4: endpoint@4 { + reg = <4>; + remote-endpoint = <&vin4csi40>; + }; + csi40vin5: endpoint@5 { + reg = <5>; + remote-endpoint = <&vin5csi40>; + }; + csi40vin6: endpoint@6 { + reg = <6>; + remote-endpoint = <&vin6csi40>; + }; + csi40vin7: endpoint@7 { + reg = <7>; + remote-endpoint = <&vin7csi40>; + }; + }; + + }; + }; + prr: chipid@fff00044 { compatible = "renesas,prr"; reg = <0 0xfff00044 0 4>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts index 0895503b69d0..c1a56eab7b24 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts @@ -112,6 +112,7 @@ ports { /* rsnd_port0 is on salvator-common */ rsnd_port1: port@1 { + reg = <1>; rsnd_endpoint1: endpoint { remote-endpoint = <&dw_hdmi0_snd_in>; @@ -123,6 +124,7 @@ }; }; rsnd_port2: port@2 { + reg = <2>; rsnd_endpoint2: endpoint { remote-endpoint = <&dw_hdmi1_snd_in>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index 0fb84c219b2f..40d10daca852 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -28,6 +28,7 @@ compatible = "renesas,ipmmu-r8a7795"; reg = <0 0xec680000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 5>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -35,6 +36,7 @@ compatible = "renesas,ipmmu-r8a7795"; reg = <0 0xe7730000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 8>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; #iommu-cells = <1>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 1620e8d8dacc..d2d48b33b37f 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -112,6 +112,7 @@ ports { /* rsnd_port0 is on salvator-common */ rsnd_port1: port@1 { + reg = <1>; rsnd_endpoint1: endpoint { remote-endpoint = <&dw_hdmi0_snd_in>; @@ -123,6 +124,7 @@ }; }; rsnd_port2: port@2 { + reg = <2>; rsnd_endpoint2: endpoint { remote-endpoint = <&dw_hdmi1_snd_in>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts index cf08a119eec0..42101fc76837 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts @@ -127,6 +127,7 @@ ports { /* rsnd_port0 is on salvator-common */ rsnd_port1: port@1 { + reg = <1>; rsnd_endpoint1: endpoint { remote-endpoint = <&dw_hdmi0_snd_in>; @@ -138,6 +139,7 @@ }; }; rsnd_port2: port@2 { + reg = <2>; rsnd_endpoint2: endpoint { remote-endpoint = <&dw_hdmi1_snd_in>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index a79c8d369e0b..af9605d5db27 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -116,6 +116,38 @@ #address-cells = <1>; #size-cells = <0>; + cpu-map { + cluster0 { + core0 { + cpu = <&a57_0>; + }; + core1 { + cpu = <&a57_1>; + }; + core2 { + cpu = <&a57_2>; + }; + core3 { + cpu = <&a57_3>; + }; + }; + + cluster1 { + core0 { + cpu = <&a53_0>; + }; + core1 { + cpu = <&a53_1>; + }; + core2 { + cpu = <&a53_2>; + }; + core3 { + cpu = <&a53_3>; + }; + }; + }; + a57_0: cpu@0 { compatible = "arm,cortex-a57", "arm,armv8"; reg = <0x0>; @@ -125,6 +157,7 @@ enable-method = "psci"; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; #cooling-cells = <2>; }; @@ -137,6 +170,7 @@ enable-method = "psci"; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; #cooling-cells = <2>; }; @@ -149,6 +183,7 @@ enable-method = "psci"; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; #cooling-cells = <2>; }; @@ -161,6 +196,7 @@ enable-method = "psci"; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; #cooling-cells = <2>; }; @@ -173,6 +209,7 @@ enable-method = "psci"; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; }; a53_1: cpu@101 { @@ -184,6 +221,7 @@ enable-method = "psci"; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; }; a53_2: cpu@102 { @@ -195,6 +233,7 @@ enable-method = "psci"; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; }; a53_3: cpu@103 { @@ -206,6 +245,7 @@ enable-method = "psci"; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; }; L2_CA57: cache-controller-0 { @@ -695,7 +735,7 @@ hsusb: usb@e6590000 { compatible = "renesas,usbhs-r8a7795", "renesas,rcar-gen3-usbhs"; - reg = <0 0xe6590000 0 0x100>; + reg = <0 0xe6590000 0 0x200>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, @@ -712,7 +752,7 @@ hsusb3: usb@e659c000 { compatible = "renesas,usbhs-r8a7795", "renesas,rcar-gen3-usbhs"; - reg = <0 0xe659c000 0 0x100>; + reg = <0 0xe659c000 0 0x200>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 705>, <&cpg CPG_MOD 700>; dmas = <&usb_dmac2 0>, <&usb_dmac2 1>, @@ -1920,6 +1960,217 @@ }; }; + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx"; + }; + ssiu01: ssiu-1 { + dmas = <&audma0 0x35>, <&audma1 0x36>; + dma-names = "rx", "tx"; + }; + ssiu02: ssiu-2 { + dmas = <&audma0 0x37>, <&audma1 0x38>; + dma-names = "rx", "tx"; + }; + ssiu03: ssiu-3 { + dmas = <&audma0 0x47>, <&audma1 0x48>; + dma-names = "rx", "tx"; + }; + ssiu04: ssiu-4 { + dmas = <&audma0 0x3F>, <&audma1 0x40>; + dma-names = "rx", "tx"; + }; + ssiu05: ssiu-5 { + dmas = <&audma0 0x43>, <&audma1 0x44>; + dma-names = "rx", "tx"; + }; + ssiu06: ssiu-6 { + dmas = <&audma0 0x4F>, <&audma1 0x50>; + dma-names = "rx", "tx"; + }; + ssiu07: ssiu-7 { + dmas = <&audma0 0x53>, <&audma1 0x54>; + dma-names = "rx", "tx"; + }; + ssiu10: ssiu-8 { + dmas = <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx"; + }; + ssiu11: ssiu-9 { + dmas = <&audma0 0x4B>, <&audma1 0x4C>; + dma-names = "rx", "tx"; + }; + ssiu12: ssiu-10 { + dmas = <&audma0 0x57>, <&audma1 0x58>; + dma-names = "rx", "tx"; + }; + ssiu13: ssiu-11 { + dmas = <&audma0 0x59>, <&audma1 0x5A>; + dma-names = "rx", "tx"; + }; + ssiu14: ssiu-12 { + dmas = <&audma0 0x5F>, <&audma1 0x60>; + dma-names = "rx", "tx"; + }; + ssiu15: ssiu-13 { + dmas = <&audma0 0xC3>, <&audma1 0xC4>; + dma-names = "rx", "tx"; + }; + ssiu16: ssiu-14 { + dmas = <&audma0 0xC7>, <&audma1 0xC8>; + dma-names = "rx", "tx"; + }; + ssiu17: ssiu-15 { + dmas = <&audma0 0xCB>, <&audma1 0xCC>; + dma-names = "rx", "tx"; + }; + ssiu20: ssiu-16 { + dmas = <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx"; + }; + ssiu21: ssiu-17 { + dmas = <&audma0 0x67>, <&audma1 0x68>; + dma-names = "rx", "tx"; + }; + ssiu22: ssiu-18 { + dmas = <&audma0 0x6B>, <&audma1 0x6C>; + dma-names = "rx", "tx"; + }; + ssiu23: ssiu-19 { + dmas = <&audma0 0x6D>, <&audma1 0x6E>; + dma-names = "rx", "tx"; + }; + ssiu24: ssiu-20 { + dmas = <&audma0 0xCF>, <&audma1 0xCE>; + dma-names = "rx", "tx"; + }; + ssiu25: ssiu-21 { + dmas = <&audma0 0xEB>, <&audma1 0xEC>; + dma-names = "rx", "tx"; + }; + ssiu26: ssiu-22 { + dmas = <&audma0 0xED>, <&audma1 0xEE>; + dma-names = "rx", "tx"; + }; + ssiu27: ssiu-23 { + dmas = <&audma0 0xEF>, <&audma1 0xF0>; + dma-names = "rx", "tx"; + }; + ssiu30: ssiu-24 { + dmas = <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx"; + }; + ssiu31: ssiu-25 { + dmas = <&audma0 0x21>, <&audma1 0x22>; + dma-names = "rx", "tx"; + }; + ssiu32: ssiu-26 { + dmas = <&audma0 0x23>, <&audma1 0x24>; + dma-names = "rx", "tx"; + }; + ssiu33: ssiu-27 { + dmas = <&audma0 0x25>, <&audma1 0x26>; + dma-names = "rx", "tx"; + }; + ssiu34: ssiu-28 { + dmas = <&audma0 0x27>, <&audma1 0x28>; + dma-names = "rx", "tx"; + }; + ssiu35: ssiu-29 { + dmas = <&audma0 0x29>, <&audma1 0x2A>; + dma-names = "rx", "tx"; + }; + ssiu36: ssiu-30 { + dmas = <&audma0 0x2B>, <&audma1 0x2C>; + dma-names = "rx", "tx"; + }; + ssiu37: ssiu-31 { + dmas = <&audma0 0x2D>, <&audma1 0x2E>; + dma-names = "rx", "tx"; + }; + ssiu40: ssiu-32 { + dmas = <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx"; + }; + ssiu41: ssiu-33 { + dmas = <&audma0 0x17>, <&audma1 0x18>; + dma-names = "rx", "tx"; + }; + ssiu42: ssiu-34 { + dmas = <&audma0 0x19>, <&audma1 0x1A>; + dma-names = "rx", "tx"; + }; + ssiu43: ssiu-35 { + dmas = <&audma0 0x1B>, <&audma1 0x1C>; + dma-names = "rx", "tx"; + }; + ssiu44: ssiu-36 { + dmas = <&audma0 0x1D>, <&audma1 0x1E>; + dma-names = "rx", "tx"; + }; + ssiu45: ssiu-37 { + dmas = <&audma0 0x1F>, <&audma1 0x20>; + dma-names = "rx", "tx"; + }; + ssiu46: ssiu-38 { + dmas = <&audma0 0x31>, <&audma1 0x32>; + dma-names = "rx", "tx"; + }; + ssiu47: ssiu-39 { + dmas = <&audma0 0x33>, <&audma1 0x34>; + dma-names = "rx", "tx"; + }; + ssiu50: ssiu-40 { + dmas = <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx"; + }; + ssiu60: ssiu-41 { + dmas = <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx"; + }; + ssiu70: ssiu-42 { + dmas = <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx"; + }; + ssiu80: ssiu-43 { + dmas = <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx"; + }; + ssiu90: ssiu-44 { + dmas = <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx"; + }; + ssiu91: ssiu-45 { + dmas = <&audma0 0x7F>, <&audma1 0x80>; + dma-names = "rx", "tx"; + }; + ssiu92: ssiu-46 { + dmas = <&audma0 0x81>, <&audma1 0x82>; + dma-names = "rx", "tx"; + }; + ssiu93: ssiu-47 { + dmas = <&audma0 0x83>, <&audma1 0x84>; + dma-names = "rx", "tx"; + }; + ssiu94: ssiu-48 { + dmas = <&audma0 0xA3>, <&audma1 0xA4>; + dma-names = "rx", "tx"; + }; + ssiu95: ssiu-49 { + dmas = <&audma0 0xA5>, <&audma1 0xA6>; + dma-names = "rx", "tx"; + }; + ssiu96: ssiu-50 { + dmas = <&audma0 0xA7>, <&audma1 0xA8>; + dma-names = "rx", "tx"; + }; + ssiu97: ssiu-51 { + dmas = <&audma0 0xA9>, <&audma1 0xAA>; + dma-names = "rx", "tx"; + }; + }; + rcar_sound,ssi { ssi0: ssi-0 { interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; @@ -1972,20 +2223,6 @@ dma-names = "rx", "tx", "rxu", "txu"; }; }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - }; - port@1 { - reg = <1>; - }; - port@2 { - reg = <2>; - }; - }; }; audma0: dma-controller@ec700000 { @@ -2878,7 +3115,10 @@ cooling-maps { map0 { trip = <&sensor1_passive>; - cooling-device = <&a57_0 4 4>; + cooling-device = <&a57_0 4 4>, + <&a57_1 4 4>, + <&a57_2 4 4>, + <&a57_3 4 4>; }; }; }; @@ -2904,7 +3144,10 @@ cooling-maps { map0 { trip = <&sensor2_passive>; - cooling-device = <&a57_0 4 4>; + cooling-device = <&a57_0 4 4>, + <&a57_1 4 4>, + <&a57_2 4 4>, + <&a57_3 4 4>; }; }; }; @@ -2930,7 +3173,10 @@ cooling-maps { map0 { trip = <&sensor3_passive>; - cooling-device = <&a57_0 4 4>; + cooling-device = <&a57_0 4 4>, + <&a57_1 4 4>, + <&a57_2 4 4>, + <&a57_3 4 4>; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 1ec6aaa520c1..afedbf5728ec 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -127,6 +127,32 @@ #address-cells = <1>; #size-cells = <0>; + cpu-map { + cluster0 { + core0 { + cpu = <&a57_0>; + }; + core1 { + cpu = <&a57_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&a53_0>; + }; + core1 { + cpu = <&a53_1>; + }; + core2 { + cpu = <&a53_2>; + }; + core3 { + cpu = <&a53_3>; + }; + }; + }; + a57_0: cpu@0 { compatible = "arm,cortex-a57", "arm,armv8"; reg = <0x0>; @@ -136,6 +162,7 @@ enable-method = "psci"; clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; #cooling-cells = <2>; }; @@ -148,6 +175,7 @@ enable-method = "psci"; clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; #cooling-cells = <2>; }; @@ -160,6 +188,7 @@ enable-method = "psci"; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; }; a53_1: cpu@101 { @@ -171,6 +200,7 @@ enable-method = "psci"; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; }; a53_2: cpu@102 { @@ -182,6 +212,7 @@ enable-method = "psci"; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; }; a53_3: cpu@103 { @@ -193,6 +224,7 @@ enable-method = "psci"; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; }; L2_CA57: cache-controller-0 { @@ -401,6 +433,76 @@ reg = <0 0xe6060000 0 0x50c>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a7796-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a7796-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a7796-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a7796-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a7796-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -674,7 +776,7 @@ hsusb: usb@e6590000 { compatible = "renesas,usbhs-r8a7796", "renesas,rcar-gen3-usbhs"; - reg = <0 0xe6590000 0 0x100>; + reg = <0 0xe6590000 0 0x200>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, @@ -1794,6 +1896,217 @@ }; }; + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx"; + }; + ssiu01: ssiu-1 { + dmas = <&audma0 0x35>, <&audma1 0x36>; + dma-names = "rx", "tx"; + }; + ssiu02: ssiu-2 { + dmas = <&audma0 0x37>, <&audma1 0x38>; + dma-names = "rx", "tx"; + }; + ssiu03: ssiu-3 { + dmas = <&audma0 0x47>, <&audma1 0x48>; + dma-names = "rx", "tx"; + }; + ssiu04: ssiu-4 { + dmas = <&audma0 0x3F>, <&audma1 0x40>; + dma-names = "rx", "tx"; + }; + ssiu05: ssiu-5 { + dmas = <&audma0 0x43>, <&audma1 0x44>; + dma-names = "rx", "tx"; + }; + ssiu06: ssiu-6 { + dmas = <&audma0 0x4F>, <&audma1 0x50>; + dma-names = "rx", "tx"; + }; + ssiu07: ssiu-7 { + dmas = <&audma0 0x53>, <&audma1 0x54>; + dma-names = "rx", "tx"; + }; + ssiu10: ssiu-8 { + dmas = <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx"; + }; + ssiu11: ssiu-9 { + dmas = <&audma0 0x4B>, <&audma1 0x4C>; + dma-names = "rx", "tx"; + }; + ssiu12: ssiu-10 { + dmas = <&audma0 0x57>, <&audma1 0x58>; + dma-names = "rx", "tx"; + }; + ssiu13: ssiu-11 { + dmas = <&audma0 0x59>, <&audma1 0x5A>; + dma-names = "rx", "tx"; + }; + ssiu14: ssiu-12 { + dmas = <&audma0 0x5F>, <&audma1 0x60>; + dma-names = "rx", "tx"; + }; + ssiu15: ssiu-13 { + dmas = <&audma0 0xC3>, <&audma1 0xC4>; + dma-names = "rx", "tx"; + }; + ssiu16: ssiu-14 { + dmas = <&audma0 0xC7>, <&audma1 0xC8>; + dma-names = "rx", "tx"; + }; + ssiu17: ssiu-15 { + dmas = <&audma0 0xCB>, <&audma1 0xCC>; + dma-names = "rx", "tx"; + }; + ssiu20: ssiu-16 { + dmas = <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx"; + }; + ssiu21: ssiu-17 { + dmas = <&audma0 0x67>, <&audma1 0x68>; + dma-names = "rx", "tx"; + }; + ssiu22: ssiu-18 { + dmas = <&audma0 0x6B>, <&audma1 0x6C>; + dma-names = "rx", "tx"; + }; + ssiu23: ssiu-19 { + dmas = <&audma0 0x6D>, <&audma1 0x6E>; + dma-names = "rx", "tx"; + }; + ssiu24: ssiu-20 { + dmas = <&audma0 0xCF>, <&audma1 0xCE>; + dma-names = "rx", "tx"; + }; + ssiu25: ssiu-21 { + dmas = <&audma0 0xEB>, <&audma1 0xEC>; + dma-names = "rx", "tx"; + }; + ssiu26: ssiu-22 { + dmas = <&audma0 0xED>, <&audma1 0xEE>; + dma-names = "rx", "tx"; + }; + ssiu27: ssiu-23 { + dmas = <&audma0 0xEF>, <&audma1 0xF0>; + dma-names = "rx", "tx"; + }; + ssiu30: ssiu-24 { + dmas = <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx"; + }; + ssiu31: ssiu-25 { + dmas = <&audma0 0x21>, <&audma1 0x22>; + dma-names = "rx", "tx"; + }; + ssiu32: ssiu-26 { + dmas = <&audma0 0x23>, <&audma1 0x24>; + dma-names = "rx", "tx"; + }; + ssiu33: ssiu-27 { + dmas = <&audma0 0x25>, <&audma1 0x26>; + dma-names = "rx", "tx"; + }; + ssiu34: ssiu-28 { + dmas = <&audma0 0x27>, <&audma1 0x28>; + dma-names = "rx", "tx"; + }; + ssiu35: ssiu-29 { + dmas = <&audma0 0x29>, <&audma1 0x2A>; + dma-names = "rx", "tx"; + }; + ssiu36: ssiu-30 { + dmas = <&audma0 0x2B>, <&audma1 0x2C>; + dma-names = "rx", "tx"; + }; + ssiu37: ssiu-31 { + dmas = <&audma0 0x2D>, <&audma1 0x2E>; + dma-names = "rx", "tx"; + }; + ssiu40: ssiu-32 { + dmas = <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx"; + }; + ssiu41: ssiu-33 { + dmas = <&audma0 0x17>, <&audma1 0x18>; + dma-names = "rx", "tx"; + }; + ssiu42: ssiu-34 { + dmas = <&audma0 0x19>, <&audma1 0x1A>; + dma-names = "rx", "tx"; + }; + ssiu43: ssiu-35 { + dmas = <&audma0 0x1B>, <&audma1 0x1C>; + dma-names = "rx", "tx"; + }; + ssiu44: ssiu-36 { + dmas = <&audma0 0x1D>, <&audma1 0x1E>; + dma-names = "rx", "tx"; + }; + ssiu45: ssiu-37 { + dmas = <&audma0 0x1F>, <&audma1 0x20>; + dma-names = "rx", "tx"; + }; + ssiu46: ssiu-38 { + dmas = <&audma0 0x31>, <&audma1 0x32>; + dma-names = "rx", "tx"; + }; + ssiu47: ssiu-39 { + dmas = <&audma0 0x33>, <&audma1 0x34>; + dma-names = "rx", "tx"; + }; + ssiu50: ssiu-40 { + dmas = <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx"; + }; + ssiu60: ssiu-41 { + dmas = <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx"; + }; + ssiu70: ssiu-42 { + dmas = <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx"; + }; + ssiu80: ssiu-43 { + dmas = <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx"; + }; + ssiu90: ssiu-44 { + dmas = <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx"; + }; + ssiu91: ssiu-45 { + dmas = <&audma0 0x7F>, <&audma1 0x80>; + dma-names = "rx", "tx"; + }; + ssiu92: ssiu-46 { + dmas = <&audma0 0x81>, <&audma1 0x82>; + dma-names = "rx", "tx"; + }; + ssiu93: ssiu-47 { + dmas = <&audma0 0x83>, <&audma1 0x84>; + dma-names = "rx", "tx"; + }; + ssiu94: ssiu-48 { + dmas = <&audma0 0xA3>, <&audma1 0xA4>; + dma-names = "rx", "tx"; + }; + ssiu95: ssiu-49 { + dmas = <&audma0 0xA5>, <&audma1 0xA6>; + dma-names = "rx", "tx"; + }; + ssiu96: ssiu-50 { + dmas = <&audma0 0xA7>, <&audma1 0xA8>; + dma-names = "rx", "tx"; + }; + ssiu97: ssiu-51 { + dmas = <&audma0 0xA9>, <&audma1 0xAA>; + dma-names = "rx", "tx"; + }; + }; + rcar_sound,ssi { ssi0: ssi-0 { interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; @@ -2526,7 +2839,7 @@ cooling-maps { map0 { trip = <&sensor1_passive>; - cooling-device = <&a57_0 5 5>; + cooling-device = <&a57_0 5 5>, <&a57_1 5 5>; }; }; }; @@ -2552,7 +2865,7 @@ cooling-maps { map0 { trip = <&sensor2_passive>; - cooling-device = <&a57_0 5 5>; + cooling-device = <&a57_0 5 5>, <&a57_1 5 5>; }; }; }; @@ -2578,7 +2891,7 @@ cooling-maps { map0 { trip = <&sensor3_passive>; - cooling-device = <&a57_0 5 5>; + cooling-device = <&a57_0 5 5>, <&a57_1 5 5>; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 83946ca2eba5..6dc9b1fef830 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -590,7 +590,7 @@ hsusb: usb@e6590000 { compatible = "renesas,usbhs-r8a77965", "renesas,rcar-gen3-usbhs"; - reg = <0 0xe6590000 0 0x100>; + reg = <0 0xe6590000 0 0x200>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, @@ -795,14 +795,6 @@ #iommu-cells = <1>; }; - ipmmu_ir: mmu@ff8b0000 { - compatible = "renesas,ipmmu-r8a77965"; - reg = <0 0xff8b0000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 3>; - power-domains = <&sysc R8A77965_PD_A3IR>; - #iommu-cells = <1>; - }; - ipmmu_mm: mmu@e67b0000 { compatible = "renesas,ipmmu-r8a77965"; reg = <0 0xe67b0000 0 0x1000>; @@ -900,19 +892,67 @@ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; can0: can@e6c30000 { + compatible = "renesas,can-r8a77965", + "renesas,rcar-gen3-can"; reg = <0 0xe6c30000 0 0x1000>; - /* placeholder */ + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A77965_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; }; can1: can@e6c38000 { + compatible = "renesas,can-r8a77965", + "renesas,rcar-gen3-can"; reg = <0 0xe6c38000 0 0x1000>; - /* placeholder */ + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A77965_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + + canfd: can@e66c0000 { + compatible = "renesas,r8a77965-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A77965_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; }; pwm0: pwm@e6e30000 { @@ -2153,6 +2193,33 @@ port@2 { reg = <2>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a77965-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index cba7885cf7c3..563428d1cdc2 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -300,6 +300,19 @@ #power-domain-cells = <1>; }; + thermal: thermal@e6190000 { + compatible = "renesas,thermal-r8a77970"; + reg = <0 0xe6190000 0 0x10 + 0 0xe6190100 0 0x120>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; + }; + intc_ex: interrupt-controller@e61c0000 { compatible = "renesas,intc-ex-r8a77970", "renesas,irqc"; #interrupt-cells = <2>; @@ -316,6 +329,71 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a77970", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a77970", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a77970", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a77970", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a77970", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { compatible = "renesas,i2c-r8a77970", "renesas,rcar-gen3-i2c"; @@ -543,6 +621,56 @@ status = "disabled"; }; + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 523>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 523>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 523>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 523>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 523>; + status = "disabled"; + }; + scif0: serial@e6e60000 { compatible = "renesas,scif-r8a77970", "renesas,rcar-gen3-scif", @@ -625,6 +753,70 @@ status = "disabled"; }; + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a77970", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x64>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a77970", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a77970", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 209>; + dmas = <&dmac1 0x45>, <&dmac1 0x44>, + <&dmac2 0x45>, <&dmac2 0x44>; + dma-names = "tx", "rx", "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a77970", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 208>; + dmas = <&dmac1 0x47>, <&dmac1 0x46>, + <&dmac2 0x47>, <&dmac2 0x46>; + dma-names = "tx", "rx", "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + vin0: video@e6ef0000 { compatible = "renesas,vin-r8a77970"; reg = <0 0xe6ef0000 0 0x1000>; @@ -983,6 +1175,25 @@ }; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index d4952b527d14..5bd9b2547c36 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -330,6 +330,19 @@ #power-domain-cells = <1>; }; + tsc: thermal@e6198000 { + compatible = "renesas,r8a77980-thermal"; + reg = <0 0xe6198000 0 0x100>, + <0 0xe61a0000 0 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <1>; + }; + intc_ex: interrupt-controller@e61c0000 { compatible = "renesas,intc-ex-r8a77980", "renesas,irqc"; #interrupt-cells = <2>; @@ -346,6 +359,71 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a77980", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a77980", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a77980", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a77980", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a77980", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { compatible = "renesas,i2c-r8a77980", "renesas,rcar-gen3-i2c"; @@ -589,11 +667,62 @@ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + iommus = <&ipmmu_ds1 33>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 523>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 523>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 523>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 523>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 523>; + status = "disabled"; + }; + scif0: serial@e6e60000 { compatible = "renesas,scif-r8a77980", "renesas,rcar-gen3-scif", @@ -677,6 +806,58 @@ status = "disabled"; }; + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a77980", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x64>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a77980", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a77980", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a77980", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + vin0: video@e6ef0000 { compatible = "renesas,vin-r8a77980"; reg = <0 0xe6ef0000 0 0x1000>; @@ -1354,6 +1535,46 @@ }; }; + thermal-zones { + thermal-sensor-1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1-passive { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + sensor1-critical { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal-sensor-2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + + trips { + sensor2-passive { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + sensor2-critical { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index f342dd85b152..62bdddcbbae7 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -29,6 +29,16 @@ reg = <0x0 0x48000000 0x0 0x38000000>; }; + audio_clkout: audio-clkout { + /* + * This is same as <&rcar_sound 0> + * but needed to avoid cs2000/rcar_sound probe dead-lock + */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + cvbs-in { compatible = "composite-video-connector"; label = "CVBS IN"; @@ -119,6 +129,15 @@ }; }; + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + reg_3p3v: regulator1 { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; @@ -128,11 +147,100 @@ regulator-always-on; }; + vbus0_usb2: regulator-vbus0-usb2 { + compatible = "regulator-fixed"; + + regulator-name = "USB20_VBUS_CN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + rsnd_ak4613: sound { + compatible = "simple-scu-audio-card"; + + simple-audio-card,name = "rsnd-ak4613"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcpu>; + simple-audio-card,frame-master = <&sndcpu>; + + simple-audio-card,prefix = "ak4613"; + simple-audio-card,routing = "ak4613 Playback", "DAI0 Playback", + "DAI0 Capture", "ak4613 Capture"; + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4613>; + }; + }; + + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + x13_clk: x13 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <74250000>; }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi1: regulator-vcc-sdhi1 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI1 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi1: regulator-vccq-sdhi1 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; +}; + +&audio_clk_a { + clock-frequency = <22579200>; }; &avb { @@ -152,6 +260,16 @@ }; }; +&canfd { + pinctrl-0 = <&canfd0_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + }; +}; + &csi40 { status = "okay"; @@ -188,6 +306,7 @@ }; &ehci0 { + dr_mode = "otg"; status = "okay"; }; @@ -195,6 +314,11 @@ clock-frequency = <48000000>; }; +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -270,6 +394,37 @@ }; }; +&i2c3 { + status = "okay"; + + ak4613: codec@10 { + compatible = "asahi-kasei,ak4613"; + #sound-dai-cells = <0>; + reg = <0x10>; + clocks = <&rcar_sound 3>; + + asahi-kasei,in1-single-end; + asahi-kasei,in2-single-end; + asahi-kasei,out1-single-end; + asahi-kasei,out2-single-end; + asahi-kasei,out3-single-end; + asahi-kasei,out4-single-end; + asahi-kasei,out5-single-end; + asahi-kasei,out6-single-end; + }; + + cs2000: clk-multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x12_clk>; + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; +}; + &lvds0 { status = "okay"; @@ -295,6 +450,15 @@ }; &ohci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pciec0 { status = "okay"; }; @@ -306,6 +470,11 @@ }; }; + canfd0_pins: canfd0 { + groups = "canfd0_data"; + function = "canfd0"; + }; + du_pins: du { groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; function = "du"; @@ -321,8 +490,54 @@ function = "pwm5"; }; + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi1_pins: sd1 { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <3300>; + }; + + sdhi1_pins_uhs: sd1_uhs { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <1800>; + }; + + sdhi3_pins: sd3 { + groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds"; + function = "sdhi3"; + power-source = <1800>; + }; + + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a", + "audio_clkout_a", "audio_clkout1_a"; + function = "audio_clk"; + }; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + usb0_pins: usb { - groups = "usb0_b"; + groups = "usb0_b", "usb0_id"; function = "usb0"; }; @@ -346,19 +561,73 @@ status = "okay"; }; +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <12288000 11289600>; + clkout-lr-synchronous; + + status = "okay"; + + /* update <audio_clk_b> to <cs2000> */ + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&cs2000>, <&audio_clk_c>, + <&cpg CPG_CORE R8A77990_CLK_ZA2>; + + rcar_sound,dai { + dai0 { + playback = <&ssi0 &src0 &dvc0>; + capture = <&ssi1 &src1 &dvc1>; + }; + }; + +}; + &rwdt { timeout-sec = <60>; status = "okay"; }; &scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + status = "okay"; }; +&ssi1 { + shared-pin; +}; + &usb2_phy0 { pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; + vbus-supply = <&vbus0_usb2>; + status = "okay"; +}; + +&usb3_peri0 { + companion = <&xhci0>; status = "okay"; }; @@ -372,3 +641,46 @@ status = "okay"; }; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi1>; + vqmmc-supply = <&vccq_sdhi1>; + cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdhi3 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi3_pins>; + pinctrl-1 = <&sdhi3_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + mmc-hs200-1_8v; + bus-width = <8>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 9509dc05665f..b2f606e286ce 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -25,6 +25,36 @@ i2c7 = &i2c7; }; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -62,6 +92,13 @@ clock-frequency = <0>; }; + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + pmu_a53 { compatible = "arm,cortex-a53-pmu"; interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, @@ -213,6 +250,9 @@ clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -227,6 +267,9 @@ clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -241,6 +284,9 @@ clocks = <&cpg CPG_MOD 929>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -255,6 +301,8 @@ clocks = <&cpg CPG_MOD 928>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 928>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -269,6 +317,8 @@ clocks = <&cpg CPG_MOD 927>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 927>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>; + dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -283,6 +333,8 @@ clocks = <&cpg CPG_MOD 919>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 919>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; + dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -297,6 +349,8 @@ clocks = <&cpg CPG_MOD 918>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 918>; + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; + dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -320,6 +374,20 @@ reg = <0 0xe6060000 0 0x508>; }; + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a77990"; + reg = <0 0xe60b0000 0 0x15>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77990-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -341,6 +409,167 @@ #power-domain-cells = <1>; }; + thermal: thermal@e6190000 { + compatible = "renesas,thermal-r8a77990"; + reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; + }; + + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a77990", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a77990", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A77990_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a77990", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE R8A77990_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a77990", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE R8A77990_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a77990", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A77990_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a77990", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 0x60>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A77990_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a77990", + "renesas,rcar-gen3-usbhs"; + reg = <0 0xe6590000 0 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <11>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 704>, <&cpg 703>; + status = "disabled"; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a77990-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a77990-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a77990", "renesas,rcar-dmac"; @@ -588,11 +817,69 @@ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + can0: can@e6c30000 { + compatible = "renesas,can-r8a77990", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c30000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A77990_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A77990_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6c38000 { + compatible = "renesas,can-r8a77990", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c38000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A77990_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A77990_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + + canfd: can@e66c0000 { + compatible = "renesas,r8a77990-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A77990_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A77990_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + }; + pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 0x8>; @@ -663,6 +950,40 @@ status = "disabled"; }; + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a77990", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE R8A77990_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a77990", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE R8A77990_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + scif2: serial@e6e88000 { compatible = "renesas,scif-r8a77990", "renesas,rcar-gen3-scif", "renesas,scif"; @@ -678,12 +999,64 @@ status = "disabled"; }; + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a77990", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE R8A77990_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a77990", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE R8A77990_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a77990", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 64>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE R8A77990_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + msiof0: spi@e6e90000 { compatible = "renesas,msiof-r8a77990", "renesas,rcar-gen3-msiof"; reg = <0 0xe6e90000 0 0x0064>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 211>; #address-cells = <1>; @@ -697,6 +1070,9 @@ reg = <0 0xe6ea0000 0 0x0064>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 210>; #address-cells = <1>; @@ -710,6 +1086,8 @@ reg = <0 0xe6c00000 0 0x0064>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 209>; #address-cells = <1>; @@ -723,6 +1101,8 @@ reg = <0 0xe6c10000 0 0x0064>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 208>; #address-cells = <1>; @@ -745,9 +1125,13 @@ #size-cells = <0>; port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; - vin4csi40: endpoint { + vin4csi40: endpoint@2 { + reg = <2>; remote-endpoint= <&csi40vin4>; }; }; @@ -769,15 +1153,267 @@ #size-cells = <0>; port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; - vin5csi40: endpoint { + vin5csi40: endpoint@2 { + reg = <2>; remote-endpoint= <&csi40vin5>; }; }; }; }; + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a77990", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A77990_CLK_ZA2>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,src { + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma0 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma0 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma0 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma0 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma0 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma0 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma0 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma0 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma0 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma0 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma0 0x02>, + <&audma0 0x15>, <&audma0 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma0 0x04>, + <&audma0 0x49>, <&audma0 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma0 0x06>, + <&audma0 0x63>, <&audma0 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma0 0x08>, + <&audma0 0x6f>, <&audma0 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma0 0x0a>, + <&audma0 0x71>, <&audma0 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma0 0x0c>, + <&audma0 0x73>, <&audma0 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma0 0x0e>, + <&audma0 0x75>, <&audma0 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma0 0x10>, + <&audma0 0x79>, <&audma0 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma0 0x12>, + <&audma0 0x7b>, <&audma0 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma0 0x14>, + <&audma0 0x7d>, <&audma0 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a77990", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>, + <&ipmmu_mp 2>, <&ipmmu_mp 3>, + <&ipmmu_mp 4>, <&ipmmu_mp 5>, + <&ipmmu_mp 6>, <&ipmmu_mp 7>, + <&ipmmu_mp 8>, <&ipmmu_mp 9>, + <&ipmmu_mp 10>, <&ipmmu_mp 11>, + <&ipmmu_mp 12>, <&ipmmu_mp 13>, + <&ipmmu_mp 14>, <&ipmmu_mp 15>; + }; + xhci0: usb@ee000000 { compatible = "renesas,xhci-r8a77990", "renesas,rcar-gen3-xhci"; @@ -789,6 +1425,17 @@ status = "disabled"; }; + usb3_peri0: usb@ee020000 { + compatible = "renesas,r8a77990-usb3-peri", + "renesas,rcar-gen3-usb3-peri"; + reg = <0 0xee020000 0 0x400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + ohci0: usb@ee080000 { compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; @@ -826,6 +1473,42 @@ status = "disabled"; }; + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a77990", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee100000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a77990", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee120000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 313>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a77990", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee160000 0 0x2000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -1041,12 +1724,58 @@ }; }; + pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a77990", + "renesas,pcie-rcar-gen3"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + prr: chipid@fff00044 { compatible = "renesas,prr"; reg = <0 0xfff00044 0 4>; }; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 0f2523296b8a..89df9bc844c0 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -24,6 +24,17 @@ stdout-path = "serial0:115200n8"; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 50000>; + + brightness-levels = <256 128 64 16 8 4 0>; + default-brightness-level = <6>; + + power-supply = <®_12p0v>; + enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + }; + composite-in { compatible = "composite-video-connector"; @@ -104,6 +115,15 @@ regulator-always-on; }; + reg_12p0v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "D12.0V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + vga { compatible = "vga-connector"; @@ -179,6 +199,7 @@ }; &ehci0 { + dr_mode = "host"; status = "okay"; }; @@ -186,6 +207,11 @@ clock-frequency = <48000000>; }; +&hsusb { + dr_mode = "host"; + status = "okay"; +}; + &i2c0 { pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; @@ -337,6 +363,7 @@ }; &ohci0 { + dr_mode = "host"; status = "okay"; }; @@ -445,6 +472,7 @@ pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; + renesas,no-otg-pins; status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index 214f4954b321..8530d9fc1371 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -344,6 +344,51 @@ status = "disabled"; }; + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a77995", + "renesas,rcar-gen3-usbhs"; + reg = <0 0xe6590000 0 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <11>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 704>, <&cpg 703>; + status = "disabled"; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a77995-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a77995-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + canfd: can@e66c0000 { compatible = "renesas,r8a77995-canfd", "renesas,rcar-gen3-canfd"; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 7f91ff524109..f66d990b92f1 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -607,12 +607,6 @@ sdhi2_pins: sd2 { groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; function = "sdhi2"; - power-source = <3300>; - }; - - sdhi2_pins_uhs: sd2_uhs { - groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; - function = "sdhi2"; power-source = <1800>; }; @@ -707,7 +701,10 @@ <&cpg CPG_CORE CPG_AUDIO_CLK_I>; ports { + #address-cells = <1>; + #size-cells = <0>; rsnd_port0: port@0 { + reg = <0>; rsnd_endpoint0: endpoint { remote-endpoint = <&ak4613_endpoint>; @@ -760,7 +757,7 @@ &sdhi2 { /* used for on-board 8bit eMMC */ pinctrl-0 = <&sdhi2_pins>; - pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-1 = <&sdhi2_pins>; pinctrl-names = "default", "state_uhs"; vmmc-supply = <®_3p3v>; @@ -814,6 +811,8 @@ phys = <&usb3_phy0>; phy-names = "usb"; + companion = <&xhci0>; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 89daca7356df..de694fdae067 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -332,12 +332,6 @@ sdhi2_pins: sd2 { groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; function = "sdhi2"; - power-source = <3300>; - }; - - sdhi2_pins_uhs: sd2_uhs { - groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; - function = "sdhi2"; power-source = <1800>; }; @@ -426,7 +420,7 @@ &sdhi2 { /* used for on-board 8bit eMMC */ pinctrl-0 = <&sdhi2_pins>; - pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-1 = <&sdhi2_pins>; pinctrl-names = "default", "state_uhs"; vmmc-supply = <®_3p3v>; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 49042c477870..de0c406c20cc 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -14,6 +14,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-inx.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-kd.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index dc20145dd393..bd937d68ca3b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -100,6 +100,7 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; + mmc-hs200-1_8v; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index e1a33dd981e0..ecd7f19c3542 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -479,7 +479,10 @@ cooling-maps { map0 { trip = <&target>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; contribution = <4096>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 9c24de1ba43c..7014d10b954c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -426,12 +426,18 @@ map0 { trip = <&cpu_alert0>; cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu_alert1>; cooling-device = - <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -459,7 +465,10 @@ map0 { trip = <&gpu_alert0>; cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts index cce266da28cd..027d428917b8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts @@ -23,6 +23,52 @@ clock-output-names = "clkin_gmac"; #clock-cells = <0>; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>, + <&user_led4>, <&wlan_led>, <&bt_led>; + + user_led1 { + label = "red:user1"; + gpios = <&gpio4 25 0>; + linux,default-trigger = "heartbeat"; + }; + + user_led2 { + label = "red:user2"; + gpios = <&gpio4 26 0>; + linux,default-trigger = "mmc0"; + }; + + user_led3 { + label = "red:user3"; + gpios = <&gpio4 30 0>; + linux,default-trigger = "mmc1"; + }; + + user_led4 { + label = "red:user4"; + gpios = <&gpio1 0 0>; + panic-indicator; + linux,default-trigger = "none"; + }; + + wlan_active_led { + label = "red:wlan"; + gpios = <&gpio1 1 0>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led { + label = "red:bt"; + gpios = <&gpio1 4 0>; + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + }; }; &gmac { @@ -66,6 +112,38 @@ <4 27 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + leds { + user_led1: user_led1 { + rockchip,pins = + <4 25 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led2: user_led2 { + rockchip,pins = + <4 26 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led3: user_led3 { + rockchip,pins = + <4 30 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led4: user_led4 { + rockchip,pins = + <1 0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wlan_led: wlan_led { + rockchip,pins = + <1 1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_led: bt_led { + rockchip,pins = + <1 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &usbdrd_dwc3_0 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index ff81dfda3b95..c400be64170e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -194,14 +194,6 @@ backlight: backlight { compatible = "pwm-backlight"; - brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - 17 18 19 20 21 22 23 24 25 26 27 28 29 30 - 31 32 33 34 35 36 37 38 39 40 41 42 43 44 - 45 46 47 48 49 50 51 52 53 54 55 56 57 58 - 59 60 61 62 63 64 65 66 67 68 69 70 71 72 - 73 74 75 76 77 78 79 80 81 82 83 84 85 86 - 87 88 89 90 91 92 93 94 95 96 97 98 99 100>; - default-brightness-level = <51>; enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; power-supply = <&pp3300_disp>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 2cc7c47d6a85..81e73103fa78 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -118,13 +118,17 @@ map0 { trip = <&ppvar_bigcpu_alert>; cooling-device = - <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; contribution = <4096>; }; map1 { trip = <&ppvar_bigcpu_alert>; cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; contribution = <1024>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts new file mode 100644 index 000000000000..2d721a974790 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Gru-Scarlet Rev4+ (SKU-6/Innolux) board device tree source + * + * Copyright 2018 Google, Inc + */ + +/dts-v1/; + +#include "rk3399-gru-scarlet.dtsi" + +/ { + model = "Google Scarlet"; + compatible = "google,scarlet-rev15-sku6", "google,scarlet-rev15", + "google,scarlet-rev14-sku6", "google,scarlet-rev14", + "google,scarlet-rev13-sku6", "google,scarlet-rev13", + "google,scarlet-rev12-sku6", "google,scarlet-rev12", + "google,scarlet-rev11-sku6", "google,scarlet-rev11", + "google,scarlet-rev10-sku6", "google,scarlet-rev10", + "google,scarlet-rev9-sku6", "google,scarlet-rev9", + "google,scarlet-rev8-sku6", "google,scarlet-rev8", + "google,scarlet-rev7-sku6", "google,scarlet-rev7", + "google,scarlet-rev6-sku6", "google,scarlet-rev6", + "google,scarlet-rev5-sku6", "google,scarlet-rev5", + "google,scarlet-rev4-sku6", "google,scarlet-rev4", + "google,scarlet", "google,gru", "rockchip,rk3399"; +}; + +&mipi_panel { + compatible = "innolux,p097pfg"; + avdd-supply = <&ppvarp_lcd>; + avee-supply = <&ppvarn_lcd>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-kd.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-kd.dts new file mode 100644 index 000000000000..bd7592217270 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-kd.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Gru-Scarlet Rev3+ (SKU-7/Kingdisplay) board device tree source + * + * Copyright 2018 Google, Inc + */ + +/dts-v1/; + +#include "rk3399-gru-scarlet.dtsi" + +/ { + model = "Google Scarlet"; + compatible = "google,scarlet-rev15-sku7", "google,scarlet-rev15", + "google,scarlet-rev14-sku7", "google,scarlet-rev14", + "google,scarlet-rev13-sku7", "google,scarlet-rev13", + "google,scarlet-rev12-sku7", "google,scarlet-rev12", + "google,scarlet-rev11-sku7", "google,scarlet-rev11", + "google,scarlet-rev10-sku7", "google,scarlet-rev10", + "google,scarlet-rev9-sku7", "google,scarlet-rev9", + "google,scarlet-rev8-sku7", "google,scarlet-rev8", + "google,scarlet-rev7-sku7", "google,scarlet-rev7", + "google,scarlet-rev6-sku7", "google,scarlet-rev6", + "google,scarlet-rev5-sku7", "google,scarlet-rev5", + "google,scarlet-rev4-sku7", "google,scarlet-rev4", + "google,scarlet-rev3-sku7", "google,scarlet-rev3", + "google,scarlet", "google,gru", "rockchip,rk3399"; +}; + +&mipi_panel { + compatible = "kingdisplay,kd097d04"; + power-supply = <&pp3300_s0>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi new file mode 100644 index 000000000000..fc50b3ef758c --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -0,0 +1,594 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Gru-scarlet board device tree source + * + * Copyright 2018 Google, Inc + */ + +#include "rk3399-gru.dtsi" + +/{ + /* Power tree */ + + /* ppvar_sys children, sorted by name */ + pp1250_s3: pp1250-s3 { + compatible = "regulator-fixed"; + regulator-name = "pp1250_s3"; + + /* EC turns on w/ pp1250_s3_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + + vin-supply = <&ppvar_sys>; + }; + + pp1250_cam: pp1250-dvdd { + compatible = "regulator-fixed"; + regulator-name = "pp1250_dvdd"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1250_cam_en>; + + enable-active-high; + gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>; + + /* 740us delay from gpio output high to pp1250 stable, + * rounding up to 1ms for safety. + */ + startup-delay-us = <1000>; + vin-supply = <&pp1250_s3>; + }; + + pp900_s0: pp900-s0 { + compatible = "regulator-fixed"; + regulator-name = "pp900_s0"; + + /* EC turns on w/ pp900_s0_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + vin-supply = <&ppvar_sys>; + }; + + ppvarn_lcd: ppvarn-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvarn_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&ppvarn_lcd_en>; + + enable-active-high; + gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>; + vin-supply = <&ppvar_sys>; + }; + + ppvarp_lcd: ppvarp-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvarp_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&ppvarp_lcd_en>; + + enable-active-high; + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; + vin-supply = <&ppvar_sys>; + }; + + /* pp1800 children, sorted by name */ + pp900_s3: pp900-s3 { + compatible = "regulator-fixed"; + regulator-name = "pp900_s3"; + + /* EC turns on w/ pp900_s3_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + vin-supply = <&pp1800>; + }; + + /* EC turns on pp1800_s3_en */ + pp1800_s3: pp1800 { + }; + + /* pp3300 children, sorted by name */ + pp2800_cam: pp2800-avdd { + compatible = "regulator-fixed"; + regulator-name = "pp2800_avdd"; + pinctrl-names = "default"; + pinctrl-0 = <&pp2800_cam_en>; + + enable-active-high; + gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + vin-supply = <&pp3300>; + }; + + /* EC turns on pp3300_s0_en */ + pp3300_s0: pp3300 { + }; + + /* EC turns on pp3300_s3_en */ + pp3300_s3: pp3300 { + }; + + /* + * See b/66922012 + * + * This is a hack to make sure the Bluetooth part of the QCA6174A + * is reset at boot by toggling BT_EN. At boot BT_EN is first set + * to low when the bt_3v3 regulator is registered (in disabled + * state). The fake regulator is configured as a supply of the + * wlan_3v3 regulator below. When wlan_3v3 is enabled early in + * the boot process it also enables its supply regulator bt_3v3, + * which changes BT_EN to high. + */ + bt_3v3: bt-3v3 { + compatible = "regulator-fixed"; + regulator-name = "bt_3v3"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_1v8_l>; + + enable-active-high; + gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; + vin-supply = <&pp3300_s3>; + }; + + wlan_3v3: wlan-3v3 { + compatible = "regulator-fixed"; + regulator-name = "wlan_3v3"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_pd_1v8_l>; + + /* + * The WL_EN pin is driven low when the regulator is + * registered, and transitions to high when the PCIe bus + * is powered up. + */ + enable-active-high; + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + + /* + * Require minimum 10ms from power-on (e.g., PD#) to init PCIe. + * TODO (b/64444991): how long to assert PD#? + */ + regulator-enable-ramp-delay = <10000>; + /* See bt_3v3 hack above */ + vin-supply = <&bt_3v3>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + enable-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwms = <&pwm1 0 1000000 0>; + pwm-delay-us = <10000>; + }; + + dmic: dmic { + compatible = "dmic-codec"; + dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&dmic_en>; + wakeup-delay-ms = <250>; + }; +}; + +/* pp900_s0 aliases */ +pp900_ddrpll_ap: &pp900_s0 { +}; +pp900_pcie: &pp900_s0 { +}; +pp900_usb: &pp900_s0 { +}; + +/* pp900_s3 aliases */ +pp900_emmcpll: &pp900_s3 { +}; + +/* EC turns on; alias for pp1800_s0 */ +pp1800_pcie: &pp1800_s0 { +}; + +/* On scarlet PPVAR(big_cpu, lit_cpu, gpu) need to adjust voltage ranges */ +&ppvar_bigcpu { + ctrl-voltage-range = <800074 1299226>; + regulator-min-microvolt = <800074>; + regulator-max-microvolt = <1299226>; +}; + +&ppvar_bigcpu_pwm { + /* On scarlet ppvar big cpu use pwm3 */ + pwms = <&pwm3 0 3337 0>; + regulator-min-microvolt = <800074>; + regulator-max-microvolt = <1299226>; +}; + +&ppvar_litcpu { + ctrl-voltage-range = <802122 1199620>; + regulator-min-microvolt = <802122>; + regulator-max-microvolt = <1199620>; +}; + +&ppvar_litcpu_pwm { + regulator-min-microvolt = <802122>; + regulator-max-microvolt = <1199620>; +}; + +&ppvar_gpu { + ctrl-voltage-range = <799600 1099600>; + regulator-min-microvolt = <799600>; + regulator-max-microvolt = <1099600>; +}; + +&ppvar_gpu_pwm { + regulator-min-microvolt = <799600>; + regulator-max-microvolt = <1099600>; +}; + +&ppvar_sd_card_io { + states = <1800000 0x0 3300000 0x1>; + regulator-max-microvolt = <3300000>; +}; + +&pp3000_sd_slot { + vin-supply = <&pp3300>; +}; + +ap_i2c_dig: &i2c2 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times. */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + digitizer: digitizer@9 { + compatible = "hid-over-i2c"; + reg = <0x9>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + hid-descr-addr = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&pen_int_odl &pen_reset_l>; + }; +}; + +&ap_i2c_ts { + touchscreen: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&gpio1>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_int_l &touch_reset_l>; + reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; +}; + +camera: &i2c7 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times; TODO: measure */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + /* 24M mclk is shared between world and user cameras */ + pinctrl-0 = <&i2c7_xfer &test_clkout1>; +}; + +&cdn_dp { + extcon = <&usbc_extcon0>; + phys = <&tcphy0_dp>; +}; + +&cpu_alert0 { + temperature = <66000>; +}; + +&cpu_alert1 { + temperature = <71000>; +}; + +&cros_ec { + interrupt-parent = <&gpio1>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; +}; + +&cru { + assigned-clocks = + <&cru PLL_GPLL>, <&cru PLL_CPLL>, + <&cru PLL_NPLL>, + <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>, + <&cru PCLK_PERIHP>, + <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>, + <&cru PCLK_PERILP0>, <&cru ACLK_CCI>, + <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>, + <&cru ACLK_VIO>, + <&cru ACLK_GIC_PRE>, + <&cru PCLK_DDR>, + <&cru ACLK_HDCP>; + assigned-clock-rates = + <600000000>, <1600000000>, + <1000000000>, + <150000000>, <75000000>, + <37500000>, + <100000000>, <100000000>, + <50000000>, <800000000>, + <100000000>, <50000000>, + <400000000>, + <200000000>, + <200000000>, + <400000000>; +}; + +&gpio_keys { + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>, <&pen_eject_odl>; + + pen-insert { + label = "Pen Insert"; + /* Insert = low, eject = high */ + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + linux,code = <SW_PEN_INSERTED>; + linux,input-type = <EV_SW>; + wakeup-source; + }; +}; + +&i2c_tunnel { + google,remote-bus = <0>; +}; + +&io_domains { + bt656-supply = <&pp1800_s0>; /* APIO2_VDD; 2a 2b */ + audio-supply = <&pp1800_s0>; /* APIO5_VDD; 3d 4a */ + gpio1830-supply = <&pp1800_s0>; /* APIO4_VDD; 4c 4d */ +}; + +&max98357a { + sdmode-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; +}; + +&mipi_dsi { + status = "okay"; + clock-master; + + ports { + mipi_out: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + mipi_panel: panel@0 { + /* 2 different panels are used, compatibles are in dts files */ + reg = <0>; + backlight = <&backlight>; + enable-gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&display_rst_l>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + + port@1 { + reg = <1>; + + mipi1_in_panel: endpoint@1 { + remote-endpoint = <&mipi1_out_panel>; + }; + }; + }; + }; +}; + +&mipi_dsi1 { + status = "okay"; + + ports { + mipi1_out: port@1 { + reg = <1>; + + mipi1_out_panel: endpoint { + remote-endpoint = <&mipi1_in_panel>; + }; + }; + }; +}; + +&pcie0 { + ep-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + + /* PERST# asserted in S3 */ + pcie-reset-suspend = <1>; + + vpcie3v3-supply = <&wlan_3v3>; + vpcie1v8-supply = <&pp1800_pcie>; +}; + +&sdmmc { + cd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; +}; + +&sound { + rockchip,codec = <&max98357a &dmic &codec &cdn_dp>; +}; + +&spi2 { + status = "okay"; +}; + +&wake_on_bt { + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; +}; + +/* PINCTRL OVERRIDES */ +&ec_ap_int_l { + rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>; +}; + +&ap_fw_wp { + rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_none>; +}; + +&bl_en { + rockchip,pins = <4 21 RK_FUNC_GPIO &pcfg_pull_none>; +}; + +&bt_host_wake_l { + rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_up>; +}; + +&ec_ap_int_l { + rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>; +}; + +&headset_int_l { + rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_up>; +}; + +&i2s0_8ch_bus { + rockchip,pins = + <3 24 RK_FUNC_1 &pcfg_pull_none_6ma>, + <3 25 RK_FUNC_1 &pcfg_pull_none_6ma>, + <3 26 RK_FUNC_1 &pcfg_pull_none_6ma>, + <3 27 RK_FUNC_1 &pcfg_pull_none_6ma>, + <3 31 RK_FUNC_1 &pcfg_pull_none_6ma>, + <4 0 RK_FUNC_1 &pcfg_pull_none_6ma>; +}; + +/* there is no external pull up, so need to set this pin pull up */ +&sdmmc_cd_gpio { + rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_up>; +}; + +&sd_pwr_1800_sel { + rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_up>; +}; + +&sdmode_en { + rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_down>; +}; + +&touch_reset_l { + rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_down>; +}; + +&touch_int_l { + rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_down>; +}; + +&pinctrl { + pinctrl-0 = < + &ap_pwroff /* AP will auto-assert this when in S3 */ + &clk_32k /* This pin is always 32k on gru boards */ + &wlan_rf_kill_1v8_l + >; + + pcfg_pull_none_6ma: pcfg-pull-none-6ma { + bias-disable; + drive-strength = <6>; + }; + + camera { + pp1250_cam_en: pp1250-dvdd { + rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pp2800_cam_en: pp2800-avdd { + rockchip,pins = <2 24 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + ucam_rst: ucam_rst { + rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wcam_rst: wcam_rst { + rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + digitizer { + pen_int_odl: pen-int-odl { + rockchip,pins = <1 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pen_reset_l: pen-reset-l { + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + discrete-regulators { + display_rst_l: display-rst-l { + rockchip,pins = <4 25 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + ppvarp_lcd_en: ppvarp-lcd-en { + rockchip,pins = <4 27 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + ppvarn_lcd_en: ppvarn-lcd-en { + rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + dmic { + dmic_en: dmic-en { + rockchip,pins = <4 3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pen { + pen_eject_odl: pen-eject-odl { + rockchip,pins = <1 1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + tpm { + h1_int_od_l: h1-int-od-l { + rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&wifi { + bt_en_1v8_l: bt-en-1v8-l { + rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wlan_pd_1v8_l: wlan-pd-1v8-l { + rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* Default pull-up, but just to be clear */ + wlan_rf_kill_1v8_l: wlan-rf-kill-1v8-l { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + wifi_perst_l: wifi-perst-l { + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wlan_host_wake_l: wlan-host-wake-l { + rockchip,pins = <1 3 RK_FUNC_GPIO &pcfg_pull_up>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index ca07f6032200..ea607a601a86 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -262,6 +262,13 @@ pp5000_usb_a_vbus: pp5000 { }; + ap_rtc_clk: ap-rtc-clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + #clock-cells = <0>; + }; + gpio_keys: gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts index 3c3308daec98..12285c51cceb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts @@ -13,6 +13,53 @@ chosen { stdout-path = "serial2:1500000n8"; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>, + <&user_led4>, <&wlan_led>, <&bt_led>; + + user_led1 { + label = "green:user1"; + gpios = <&gpio4 RK_PC2 0>; + linux,default-trigger = "heartbeat"; + }; + + user_led2 { + label = "green:user2"; + gpios = <&gpio4 RK_PC6 0>; + linux,default-trigger = "mmc0"; + }; + + user_led3 { + label = "green:user3"; + gpios = <&gpio4 RK_PD0 0>; + linux,default-trigger = "mmc1"; + }; + + user_led4 { + label = "green:user4"; + gpios = <&gpio4 RK_PD4 0>; + panic-indicator; + linux,default-trigger = "none"; + }; + + wlan_active_led { + label = "yellow:wlan"; + gpios = <&gpio4 RK_PD5 0>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led { + label = "blue:bt"; + gpios = <&gpio4 RK_PD6 0>; + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + }; + }; &pcie0 { @@ -20,6 +67,38 @@ }; &pinctrl { + leds { + user_led1: user_led1 { + rockchip,pins = + <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led2: user_led2 { + rockchip,pins = + <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led3: user_led3 { + rockchip,pins = + <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led4: user_led4 { + rockchip,pins = + <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wlan_led: wlan_led { + rockchip,pins = + <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_led: bt_led { + rockchip,pins = + <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pcie { pcie_drv: pcie-drv { rockchip,pins = diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts index 5bd4d69914bd..be78172abc09 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -205,6 +205,13 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts index fef2c0608999..0b8f1edbd746 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts @@ -42,6 +42,47 @@ }; }; + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <200>; + enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + pwms = <&pwm0 0 25000 0>; + status = "okay"; + }; + edp_panel: edp-panel { compatible ="lg,lp079qx1-sp0v", "simple-panel"; backlight = <&backlight>; @@ -95,11 +136,6 @@ }; }; -&backlight { - enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - &edp { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index 5421e23760c3..946d3589575a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -11,43 +11,8 @@ / { compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399"; - backlight: backlight { - compatible = "pwm-backlight"; - brightness-levels = < - 0 1 2 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; - default-brightness-level = <200>; - pwms = <&pwm0 0 25000 0>; + chosen { + stdout-path = "serial2:1500000n8"; }; clkin_gmac: external-gmac-clock { @@ -66,6 +31,19 @@ regulator-max-microvolt = <12000000>; }; + /* + * The fan power supply comes from the baseboard. + * For the standalone Sapphire one option is to connect a wire + * from R90030 DNP R0805 pin2 to C90002 10uF C0805 pin1 (vcc_sys). + */ + fan0: gpio-fan { + #cooling-cells = <2>; + compatible = "gpio-fan"; + gpio-fan,speed-map = <0 0 3000 1>; + gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + keys: gpio-keys { compatible = "gpio-keys"; autorepeat; @@ -183,6 +161,24 @@ cpu-supply = <&vdd_cpu_b>; }; +&cpu_thermal { + trips { + cpu_hot: cpu_hot { + hysteresis = <10000>; + temperature = <55000>; + type = "active"; + }; + }; + + cooling-maps { + map2 { + cooling-device = + <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + trip = <&cpu_hot>; + }; + }; +}; + &emmc_phy { status = "okay"; }; @@ -472,6 +468,13 @@ }; }; + fan { + motor_pwr: motor-pwr { + rockchip,pins = + <RK_GPIO1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 99e7f65c1779..6cc1c9fa4ea6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -681,6 +681,8 @@ clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; clock-names = "spiclk", "apb_pclk"; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_peri 10>, <&dmac_peri 11>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; #address-cells = <1>; @@ -694,6 +696,8 @@ clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; clock-names = "spiclk", "apb_pclk"; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_peri 12>, <&dmac_peri 13>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; #address-cells = <1>; @@ -707,6 +711,8 @@ clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; clock-names = "spiclk", "apb_pclk"; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_peri 14>, <&dmac_peri 15>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; #address-cells = <1>; @@ -720,6 +726,8 @@ clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>; clock-names = "spiclk", "apb_pclk"; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_peri 18>, <&dmac_peri 19>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>; #address-cells = <1>; @@ -733,6 +741,8 @@ clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>; clock-names = "spiclk", "apb_pclk"; interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_bus 8>, <&dmac_bus 9>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>; power-domains = <&power RK3399_PD_SDIOAUDIO>; @@ -770,13 +780,18 @@ map0 { trip = <&cpu_alert0>; cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu_alert1>; cooling-device = <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -804,7 +819,8 @@ map0 { trip = <&gpu_alert0>; cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -1226,6 +1242,18 @@ status = "disabled"; }; + vpu: video-codec@ff650000 { + compatible = "rockchip,rk3399-vpu"; + reg = <0x0 0xff650000 0x0 0x800>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "vepu", "vdpu"; + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; + clock-names = "aclk", "hclk"; + iommus = <&vpu_mmu>; + power-domains = <&power RK3399_PD_VCODEC>; + }; + vpu_mmu: iommu@ff650800 { compatible = "rockchip,iommu"; reg = <0x0 0xff650800 0x0 0x40>; @@ -1234,7 +1262,7 @@ clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; clock-names = "aclk", "iface"; #iommu-cells = <0>; - status = "disabled"; + power-domains = <&power RK3399_PD_VCODEC>; }; vdec_mmu: iommu@ff660480 { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index d7e2d8969601..4a0c46cb11cd 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -206,13 +206,10 @@ cooling-maps { map0 { trip = <&cpu_alert>; - cooling-device = <&cpu0 - THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu_alert>; - cooling-device = <&cpu2 - THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi index 63894c456969..4bcdbb709c01 100644 --- a/arch/arm64/boot/dts/sprd/sc9836.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi @@ -50,10 +50,11 @@ reg = <0 0x10003000 0 0x1000>; clocks = <&clk26mhz>; clock-names = "apb_pclk"; - port { - etf_in: endpoint { - slave-mode; - remote-endpoint = <&funnel_out_port0>; + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&funnel_out_port0>; + }; }; }; }; @@ -63,55 +64,50 @@ reg = <0 0x10001000 0 0x1000>; clocks = <&clk26mhz>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel_out_port0: endpoint { remote-endpoint = <&etf_in>; }; }; + }; - /* funnel input port 0-4 */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&etm0_out>; }; }; - port@2 { + port@1 { reg = <1>; funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&etm1_out>; }; }; - port@3 { + port@2 { reg = <2>; funnel_in_port2: endpoint { - slave-mode; remote-endpoint = <&etm2_out>; }; }; - port@4 { + port@3 { reg = <3>; funnel_in_port3: endpoint { - slave-mode; remote-endpoint = <&etm3_out>; }; }; - port@5 { + port@4 { reg = <4>; funnel_in_port4: endpoint { - slave-mode; remote-endpoint = <&stm_out>; }; }; @@ -126,9 +122,11 @@ cpu = <&cpu0>; clocks = <&clk26mhz>; clock-names = "apb_pclk"; - port { - etm0_out: endpoint { - remote-endpoint = <&funnel_in_port0>; + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; }; }; }; @@ -140,9 +138,11 @@ cpu = <&cpu1>; clocks = <&clk26mhz>; clock-names = "apb_pclk"; - port { - etm1_out: endpoint { - remote-endpoint = <&funnel_in_port1>; + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&funnel_in_port1>; + }; }; }; }; @@ -154,9 +154,11 @@ cpu = <&cpu2>; clocks = <&clk26mhz>; clock-names = "apb_pclk"; - port { - etm2_out: endpoint { - remote-endpoint = <&funnel_in_port2>; + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&funnel_in_port2>; + }; }; }; }; @@ -168,9 +170,11 @@ cpu = <&cpu3>; clocks = <&clk26mhz>; clock-names = "apb_pclk"; - port { - etm3_out: endpoint { - remote-endpoint = <&funnel_in_port3>; + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&funnel_in_port3>; + }; }; }; }; @@ -182,9 +186,11 @@ reg-names = "stm-base", "stm-stimulus-base"; clocks = <&clk26mhz>; clock-names = "apb_pclk"; - port { - stm_out: endpoint { - remote-endpoint = <&funnel_in_port4>; + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel_in_port4>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi index 48f5928ed45c..5f57bf055cde 100644 --- a/arch/arm64/boot/dts/sprd/sc9860.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi @@ -304,30 +304,29 @@ reg = <0 0x10001000 0 0x1000>; clocks = <&ext_26m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { soc_funnel_out_port: endpoint { remote-endpoint = <&etb_in>; }; }; + }; - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; soc_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&main_funnel_out_port>; }; }; - port@2 { + port@4 { reg = <4>; soc_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&stm_out_port>; }; @@ -340,11 +339,12 @@ reg = <0 0x10003000 0 0x1000>; clocks = <&ext_26m>; clock-names = "apb_pclk"; - port { - etb_in: endpoint { - slave-mode; - remote-endpoint = - <&soc_funnel_out_port>; + out-ports { + port { + etb_in: endpoint { + remote-endpoint = + <&soc_funnel_out_port>; + }; }; }; }; @@ -356,10 +356,12 @@ reg-names = "stm-base", "stm-stimulus-base"; clocks = <&ext_26m>; clock-names = "apb_pclk"; - port { - stm_out_port: endpoint { - remote-endpoint = - <&soc_funnel_in_port1>; + out-ports { + port { + stm_out_port: endpoint { + remote-endpoint = + <&soc_funnel_in_port1>; + }; }; }; }; @@ -369,38 +371,36 @@ reg = <0 0x11001000 0 0x1000>; clocks = <&ext_26m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { cluster0_funnel_out_port: endpoint { remote-endpoint = <&cluster0_etf_in>; }; }; + }; - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; cluster0_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&etm0_out>; }; }; - port@2 { + port@1 { reg = <1>; cluster0_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&etm1_out>; }; }; - port@3 { + port@2 { reg = <2>; cluster0_funnel_in_port2: endpoint { - slave-mode; remote-endpoint = <&etm2_out>; }; }; @@ -408,7 +408,6 @@ port@4 { reg = <4>; cluster0_funnel_in_port3: endpoint { - slave-mode; remote-endpoint = <&etm3_out>; }; }; @@ -420,46 +419,43 @@ reg = <0 0x11002000 0 0x1000>; clocks = <&ext_26m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { cluster1_funnel_out_port: endpoint { remote-endpoint = <&cluster1_etf_in>; }; }; + }; - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; cluster1_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&etm4_out>; }; }; - port@2 { + port@1 { reg = <1>; cluster1_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&etm5_out>; }; }; - port@3 { + port@2 { reg = <2>; cluster1_funnel_in_port2: endpoint { - slave-mode; remote-endpoint = <&etm6_out>; }; }; - port@4 { + port@3 { reg = <3>; cluster1_funnel_in_port3: endpoint { - slave-mode; remote-endpoint = <&etm7_out>; }; }; @@ -472,22 +468,18 @@ clocks = <&ext_26m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { cluster0_etf_out: endpoint { remote-endpoint = <&main_funnel_in_port0>; }; }; + }; - port@1 { - reg = <0>; + in-ports { + port { cluster0_etf_in: endpoint { - slave-mode; remote-endpoint = <&cluster0_funnel_out_port>; }; @@ -501,22 +493,18 @@ clocks = <&ext_26m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { cluster1_etf_out: endpoint { remote-endpoint = <&main_funnel_in_port1>; }; }; + }; - port@1 { - reg = <0>; + in-ports { + port { cluster1_etf_in: endpoint { - slave-mode; remote-endpoint = <&cluster1_funnel_out_port>; }; @@ -530,31 +518,30 @@ clocks = <&ext_26m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { main_funnel_out_port: endpoint { remote-endpoint = <&soc_funnel_in_port0>; }; }; + }; - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; main_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&cluster0_etf_out>; }; }; - port@2 { + port@1 { reg = <1>; main_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&cluster1_etf_out>; }; @@ -569,10 +556,12 @@ clocks = <&ext_26m>; clock-names = "apb_pclk"; - port { - etm0_out: endpoint { - remote-endpoint = - <&cluster0_funnel_in_port0>; + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in_port0>; + }; }; }; }; @@ -584,10 +573,12 @@ clocks = <&ext_26m>; clock-names = "apb_pclk"; - port { - etm1_out: endpoint { - remote-endpoint = - <&cluster0_funnel_in_port1>; + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in_port1>; + }; }; }; }; @@ -599,10 +590,12 @@ clocks = <&ext_26m>; clock-names = "apb_pclk"; - port { - etm2_out: endpoint { - remote-endpoint = - <&cluster0_funnel_in_port2>; + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in_port2>; + }; }; }; }; @@ -614,10 +607,12 @@ clocks = <&ext_26m>; clock-names = "apb_pclk"; - port { - etm3_out: endpoint { - remote-endpoint = - <&cluster0_funnel_in_port3>; + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in_port3>; + }; }; }; }; @@ -629,10 +624,12 @@ clocks = <&ext_26m>; clock-names = "apb_pclk"; - port { - etm4_out: endpoint { - remote-endpoint = - <&cluster1_funnel_in_port0>; + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in_port0>; + }; }; }; }; @@ -644,10 +641,12 @@ clocks = <&ext_26m>; clock-names = "apb_pclk"; - port { - etm5_out: endpoint { - remote-endpoint = - <&cluster1_funnel_in_port1>; + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in_port1>; + }; }; }; }; @@ -659,10 +658,12 @@ clocks = <&ext_26m>; clock-names = "apb_pclk"; - port { - etm6_out: endpoint { - remote-endpoint = - <&cluster1_funnel_in_port2>; + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in_port2>; + }; }; }; }; @@ -674,10 +675,12 @@ clocks = <&ext_26m>; clock-names = "apb_pclk"; - port { - etm7_out: endpoint { - remote-endpoint = - <&cluster1_funnel_in_port3>; + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in_port3>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index adcd6341e40c..272cf8fc8d30 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -48,6 +48,7 @@ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; + power-domains = <&k3_pds 146>; }; main_uart1: serial@2810000 { @@ -57,7 +58,7 @@ reg-io-width = <4>; interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - current-speed = <115200>; + power-domains = <&k3_pds 147>; }; main_uart2: serial@2820000 { @@ -67,6 +68,127 @@ reg-io-width = <4>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - current-speed = <115200>; + power-domains = <&k3_pds 148>; + }; + + main_pmx0: pinmux@11c000 { + compatible = "pinctrl-single"; + reg = <0x0 0x11c000 0x0 0x2e4>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_pmx1: pinmux@11c2e8 { + compatible = "pinctrl-single"; + reg = <0x0 0x11c2e8 0x0 0x24>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_i2c0: i2c@2000000 { + compatible = "ti,am654-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2000000 0x0 0x100>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 110 1>; + power-domains = <&k3_pds 110>; + }; + + main_i2c1: i2c@2010000 { + compatible = "ti,am654-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2010000 0x0 0x100>; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 111 1>; + power-domains = <&k3_pds 111>; + }; + + main_i2c2: i2c@2020000 { + compatible = "ti,am654-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2020000 0x0 0x100>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 112 1>; + power-domains = <&k3_pds 112>; + }; + + main_i2c3: i2c@2030000 { + compatible = "ti,am654-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2030000 0x0 0x100>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 113 1>; + power-domains = <&k3_pds 113>; + }; + + ecap0: pwm@3100000 { + compatible = "ti,am654-ecap", "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x0 0x03100000 0x0 0x60>; + power-domains = <&k3_pds 39>; + clocks = <&k3_clks 39 0>; + clock-names = "fck"; + }; + + main_spi0: spi@2100000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x0 0x2100000 0x0 0x400>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 137 1>; + power-domains = <&k3_pds 137>; + #address-cells = <1>; + #size-cells = <0>; + }; + + main_spi1: spi@2110000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x0 0x2110000 0x0 0x400>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 138 1>; + power-domains = <&k3_pds 138>; + #address-cells = <1>; + #size-cells = <0>; + assigned-clocks = <&k3_clks 137 1>; + assigned-clock-rates = <48000000>; + }; + + main_spi2: spi@2120000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x0 0x2120000 0x0 0x400>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 139 1>; + power-domains = <&k3_pds 139>; + #address-cells = <1>; + #size-cells = <0>; + }; + + main_spi3: spi@2130000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x0 0x2130000 0x0 0x400>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 140 1>; + power-domains = <&k3_pds 140>; + #address-cells = <1>; + #size-cells = <0>; + }; + + main_spi4: spi@2140000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x0 0x2140000 0x0 0x400>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 141 1>; + power-domains = <&k3_pds 141>; + #address-cells = <1>; + #size-cells = <0>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index 8c611d16df44..593f718e8fb5 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -14,5 +14,47 @@ interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <96000000>; current-speed = <115200>; + power-domains = <&k3_pds 149>; + }; + + mcu_i2c0: i2c@40b00000 { + compatible = "ti,am654-i2c", "ti,omap4-i2c"; + reg = <0x0 0x40b00000 0x0 0x100>; + interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 114 1>; + power-domains = <&k3_pds 114>; + }; + + mcu_spi0: spi@40300000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x0 0x40300000 0x0 0x400>; + interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 142 1>; + power-domains = <&k3_pds 142>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mcu_spi1: spi@40310000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x0 0x40310000 0x0 0x400>; + interrupts = <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 143 1>; + power-domains = <&k3_pds 143>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mcu_spi2: spi@40320000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x0 0x40320000 0x0 0x400>; + interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 144 1>; + power-domains = <&k3_pds 144>; + #address-cells = <1>; + #size-cells = <0>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index 8d7b47f9dfbf..7cbdc0912ab7 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -34,6 +34,14 @@ }; }; + wkup_pmx0: pinmux@4301c000 { + compatible = "pinctrl-single"; + reg = <0x4301c000 0x118>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + wkup_uart0: serial@42300000 { compatible = "ti,am654-uart"; reg = <0x42300000 0x100>; @@ -42,5 +50,17 @@ interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; + power-domains = <&k3_pds 150>; + }; + + wkup_i2c0: i2c@42120000 { + compatible = "ti,am654-i2c", "ti,omap4-i2c"; + reg = <0x42120000 0x100>; + interrupts = <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 115 1>; + power-domains = <&k3_pds 115>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index 3d4bf369d030..50f4be2047a9 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/k3.h> / { model = "Texas Instruments K3 AM654 SoC"; @@ -22,6 +23,12 @@ serial2 = &main_uart0; serial3 = &main_uart1; serial4 = &main_uart2; + i2c0 = &wkup_i2c0; + i2c1 = &mcu_i2c0; + i2c2 = &main_i2c0; + i2c3 = &main_i2c1; + i2c4 = &main_i2c2; + i2c5 = &main_i2c3; }; chosen { }; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index e146ac2ad781..e41fc3a5987b 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -35,7 +35,131 @@ }; }; +&wkup_pmx0 { + wkup_i2c0_pins_default: wkup-i2c0-pins-default { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */ + AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */ + >; + }; +}; + +&main_pmx0 { + main_uart0_pins_default: main-uart0-pins-default { + pinctrl-single,pins = < + AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */ + AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */ + AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */ + AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */ + >; + }; + + main_i2c2_pins_default: main-i2c2-pins-default { + pinctrl-single,pins = < + AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) GPMC0_CSn3.I2C2_SCL */ + AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) GPMC0_CSn2.I2C2_SDA */ + >; + }; + + main_spi0_pins_default: main-spi0-pins-default { + pinctrl-single,pins = < + AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */ + AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */ + AM65X_IOPAD(0x01cc, PIN_INPUT, 0) /* (AD13) SPI0_D1 */ + AM65X_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (AG13) SPI0_CS0 */ + >; + }; +}; + +&main_pmx1 { + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */ + AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-pins-default { + pinctrl-single,pins = < + AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */ + AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ + >; + }; + + ecap0_pins_default: ecap0-pins-default { + pinctrl-single,pins = < + AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */ + >; + }; +}; + &wkup_uart0 { /* Wakeup UART is used by System firmware */ status = "disabled"; }; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; +}; + +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + + pca9554: gpio@39 { + compatible = "nxp,pca9554"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + pca9555: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <400000>; +}; + +&main_i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c2_pins_default>; + clock-frequency = <400000>; +}; + +&ecap0 { + pinctrl-names = "default"; + pinctrl-0 = <&ecap0_pins_default>; +}; + +&main_spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_spi0_pins_default>; + #address-cells = <1>; + #size-cells= <0>; + ti,pindir-d0-out-d1-in = <1>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + spi-max-frequency = <48000000>; + #address-cells = <1>; + #size-cells= <1>; + }; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi index 9c09baca7dd7..306ad2157c98 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi @@ -58,13 +58,13 @@ clock-accuracy = <100>; }; - dpdma_clk: dpdma_clk { + dpdma_clk: dpdma-clk { compatible = "fixed-clock"; #clock-cells = <0x0>; clock-frequency = <533000000>; }; - drm_clock: drm_clock { + drm_clock: drm-clock { compatible = "fixed-clock"; #clock-cells = <0x0>; clock-frequency = <262750000>; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index eb5e8bddb610..13a0a028df98 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -49,7 +49,7 @@ label = "sw4"; gpios = <&gpio 23 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; autorepeat; }; }; @@ -82,7 +82,7 @@ linux,default-trigger = "bluetooth-power"; }; - vbus_det { /* U5 USB5744 VBUS detection via MIO25 */ + vbus-det { /* U5 USB5744 VBUS detection via MIO25 */ label = "vbus_det"; gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -98,7 +98,7 @@ regulator-boot-on; }; - sdio_pwrseq: sdio_pwrseq { + sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */ }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index 25dd57485323..cef81671f3ab 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -46,14 +46,14 @@ label = "sw19"; gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; linux,code = <KEY_DOWN>; - gpio-key,wakeup; + wakeup-source; autorepeat; }; }; leds { compatible = "gpio-leds"; - heartbeat_led { + heartbeat-led { label = "heartbeat"; gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; @@ -139,25 +139,25 @@ * 7, 10 - 17 - not connected */ - gtr_sel0 { + gtr-sel0 { gpio-hog; gpios = <0 0>; output-low; /* PCIE = 0, DP = 1 */ line-name = "sel0"; }; - gtr_sel1 { + gtr-sel1 { gpio-hog; gpios = <1 0>; output-high; /* PCIE = 0, DP = 1 */ line-name = "sel1"; }; - gtr_sel2 { + gtr-sel2 { gpio-hog; gpios = <2 0>; output-high; /* PCIE = 0, USB0 = 1 */ line-name = "sel2"; }; - gtr_sel3 { + gtr-sel3 { gpio-hog; gpios = <3 0>; output-high; /* PCIE = 0, SATA = 1 */ diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index 259f21b0c001..94cf5094df64 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -46,14 +46,14 @@ label = "sw19"; gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; linux,code = <KEY_DOWN>; - gpio-key,wakeup; + wakeup-source; autorepeat; }; }; leds { compatible = "gpio-leds"; - heartbeat_led { + heartbeat-led { label = "heartbeat"; gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index a61b3cc6f4c9..460adc378295 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -46,14 +46,14 @@ label = "sw19"; gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; linux,code = <KEY_DOWN>; - gpio-key,wakeup; + wakeup-source; autorepeat; }; }; leds { compatible = "gpio-leds"; - heartbeat_led { + heartbeat-led { label = "heartbeat"; gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 29ce23422acf..fa4fd777d90e 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -71,7 +71,7 @@ }; }; - cpu_opp_table: cpu_opp_table { + cpu_opp_table: cpu-opp-table { compatible = "operating-points-v2"; opp-shared; opp00 { @@ -124,7 +124,7 @@ <1 10 0xf08>; }; - amba_apu: amba_apu@0 { + amba_apu: amba-apu@0 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <1>; @@ -355,6 +355,13 @@ xlnx,bus-width = <64>; }; + mc: memory-controller@fd070000 { + compatible = "xlnx,zynqmp-ddrc-2.40a"; + reg = <0x0 0xfd070000 0x0 0x30000>; + interrupt-parent = <&gic>; + interrupts = <0 112 4>; + }; + gem0: ethernet@ff0b0000 { compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; @@ -403,6 +410,7 @@ compatible = "xlnx,zynqmp-gpio-1.0"; status = "disabled"; #gpio-cells = <0x2>; + gpio-controller; interrupt-parent = <&gic>; interrupts = <0 16 4>; interrupt-controller; @@ -484,7 +492,7 @@ interrupts = <0 133 4>; }; - sdhci0: sdhci@ff160000 { + sdhci0: mmc@ff160000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; interrupt-parent = <&gic>; @@ -493,7 +501,7 @@ clock-names = "clk_xin", "clk_ahb"; }; - sdhci1: sdhci@ff170000 { + sdhci1: mmc@ff170000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; interrupt-parent = <&gic>; diff --git a/include/dt-bindings/pinctrl/k3.h b/include/dt-bindings/pinctrl/k3.h new file mode 100644 index 000000000000..45e11b6170ca --- /dev/null +++ b/include/dt-bindings/pinctrl/k3.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides constants for pinctrl bindings for TI's K3 SoC + * family. + * + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + */ +#ifndef _DT_BINDINGS_PINCTRL_TI_K3_H +#define _DT_BINDINGS_PINCTRL_TI_K3_H + +#define PULLUDEN_SHIFT (16) +#define PULLTYPESEL_SHIFT (17) +#define RXACTIVE_SHIFT (18) + +#define PULL_DISABLE (1 << PULLUDEN_SHIFT) +#define PULL_ENABLE (0 << PULLUDEN_SHIFT) + +#define PULL_UP (1 << PULLTYPESEL_SHIFT | PULL_ENABLE) +#define PULL_DOWN (0 << PULLTYPESEL_SHIFT | PULL_ENABLE) + +#define INPUT_EN (1 << RXACTIVE_SHIFT) +#define INPUT_DISABLE (0 << RXACTIVE_SHIFT) + +/* Only these macros are expected be used directly in device tree files */ +#define PIN_OUTPUT (INPUT_DISABLE | PULL_DISABLE) +#define PIN_OUTPUT_PULLUP (INPUT_DISABLE | PULL_UP) +#define PIN_OUTPUT_PULLDOWN (INPUT_DISABLE | PULL_DOWN) +#define PIN_INPUT (INPUT_EN | PULL_DISABLE) +#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP) +#define PIN_INPUT_PULLDOWN (INPUT_EN | PULL_DOWN) + +#define AM65X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM65X_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#endif diff --git a/include/dt-bindings/thermal/tegra194-bpmp-thermal.h b/include/dt-bindings/thermal/tegra194-bpmp-thermal.h new file mode 100644 index 000000000000..aa7fb08135ca --- /dev/null +++ b/include/dt-bindings/thermal/tegra194-bpmp-thermal.h @@ -0,0 +1,15 @@ +/* + * This header provides constants for binding nvidia,tegra194-bpmp-thermal. + */ + +#ifndef _DT_BINDINGS_THERMAL_TEGRA194_BPMP_THERMAL_H +#define _DT_BINDINGS_THERMAL_TEGRA194_BPMP_THERMAL_H + +#define TEGRA194_BPMP_THERMAL_ZONE_CPU 2 +#define TEGRA194_BPMP_THERMAL_ZONE_GPU 3 +#define TEGRA194_BPMP_THERMAL_ZONE_AUX 4 +#define TEGRA194_BPMP_THERMAL_ZONE_PLLX 5 +#define TEGRA194_BPMP_THERMAL_ZONE_AO 6 +#define TEGRA194_BPMP_THERMAL_ZONE_TJ_MAX 7 + +#endif |