diff options
| -rw-r--r-- | Documentation/admin-guide/pm/intel_pstate.rst | 32 | ||||
| -rw-r--r-- | drivers/clk/clk-qoriq.c | 30 | ||||
| -rw-r--r-- | drivers/cpufreq/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/cpufreq/Kconfig.arm | 1 | ||||
| -rw-r--r-- | drivers/cpufreq/cpufreq-dt-platdev.c | 2 | ||||
| -rw-r--r-- | drivers/cpufreq/cpufreq.c | 11 | ||||
| -rw-r--r-- | drivers/cpufreq/imx-cpufreq-dt.c | 84 | ||||
| -rw-r--r-- | drivers/cpufreq/intel_pstate.c | 3 | ||||
| -rw-r--r-- | drivers/cpufreq/qcom-cpufreq-nvmem.c | 2 | ||||
| -rw-r--r-- | drivers/cpufreq/qoriq-cpufreq.c | 76 | ||||
| -rw-r--r-- | include/linux/cpufreq.h | 2 |
11 files changed, 172 insertions, 74 deletions
diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst index ad392f3aee06..39d80bc29ccd 100644 --- a/Documentation/admin-guide/pm/intel_pstate.rst +++ b/Documentation/admin-guide/pm/intel_pstate.rst @@ -62,9 +62,10 @@ on the capabilities of the processor. Active Mode ----------- -This is the default operation mode of ``intel_pstate``. If it works in this -mode, the ``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq`` -policies contains the string "intel_pstate". +This is the default operation mode of ``intel_pstate`` for processors with +hardware-managed P-states (HWP) support. If it works in this mode, the +``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq`` policies +contains the string "intel_pstate". In this mode the driver bypasses the scaling governors layer of ``CPUFreq`` and provides its own scaling algorithms for P-state selection. Those algorithms @@ -138,12 +139,13 @@ internal P-state selection logic to be less performance-focused. Active Mode Without HWP ~~~~~~~~~~~~~~~~~~~~~~~ -This is the default operation mode for processors that do not support the HWP -feature. It also is used by default with the ``intel_pstate=no_hwp`` argument -in the kernel command line. However, in this mode ``intel_pstate`` may refuse -to work with the given processor if it does not recognize it. [Note that -``intel_pstate`` will never refuse to work with any processor with the HWP -feature enabled.] +This operation mode is optional for processors that do not support the HWP +feature or when the ``intel_pstate=no_hwp`` argument is passed to the kernel in +the command line. The active mode is used in those cases if the +``intel_pstate=active`` argument is passed to the kernel in the command line. +In this mode ``intel_pstate`` may refuse to work with processors that are not +recognized by it. [Note that ``intel_pstate`` will never refuse to work with +any processor with the HWP feature enabled.] In this mode ``intel_pstate`` registers utilization update callbacks with the CPU scheduler in order to run a P-state selection algorithm, either @@ -188,10 +190,14 @@ is not set. Passive Mode ------------ -This mode is used if the ``intel_pstate=passive`` argument is passed to the -kernel in the command line (it implies the ``intel_pstate=no_hwp`` setting too). -Like in the active mode without HWP support, in this mode ``intel_pstate`` may -refuse to work with the given processor if it does not recognize it. +This is the default operation mode of ``intel_pstate`` for processors without +hardware-managed P-states (HWP) support. It is always used if the +``intel_pstate=passive`` argument is passed to the kernel in the command line +regardless of whether or not the given processor supports HWP. [Note that the +``intel_pstate=no_hwp`` setting implies ``intel_pstate=passive`` if it is used +without ``intel_pstate=active``.] Like in the active mode without HWP support, +in this mode ``intel_pstate`` may refuse to work with processors that are not +recognized by it. If the driver works in this mode, the ``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq`` policies contains the string "intel_cpufreq". diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c index d5946f7486d6..374afcab89af 100644 --- a/drivers/clk/clk-qoriq.c +++ b/drivers/clk/clk-qoriq.c @@ -95,6 +95,7 @@ struct clockgen { }; static struct clockgen clockgen; +static bool add_cpufreq_dev __initdata; static void cg_out(struct clockgen *cg, u32 val, u32 __iomem *reg) { @@ -1019,7 +1020,7 @@ static void __init create_muxes(struct clockgen *cg) } } -static void __init clockgen_init(struct device_node *np); +static void __init _clockgen_init(struct device_node *np, bool legacy); /* * Legacy nodes may get probed before the parent clockgen node. @@ -1030,7 +1031,7 @@ static void __init clockgen_init(struct device_node *np); static void __init legacy_init_clockgen(struct device_node *np) { if (!clockgen.node) - clockgen_init(of_get_parent(np)); + _clockgen_init(of_get_parent(np), true); } /* Legacy node */ @@ -1447,7 +1448,7 @@ static bool __init has_erratum_a4510(void) } #endif -static void __init clockgen_init(struct device_node *np) +static void __init _clockgen_init(struct device_node *np, bool legacy) { int i, ret; bool is_old_ls1021a = false; @@ -1516,12 +1517,35 @@ static void __init clockgen_init(struct device_node *np) __func__, np, ret); } + /* Don't create cpufreq device for legacy clockgen blocks */ + add_cpufreq_dev = !legacy; + return; err: iounmap(clockgen.regs); clockgen.regs = NULL; } +static void __init clockgen_init(struct device_node *np) +{ + _clockgen_init(np, false); +} + +static int __init clockgen_cpufreq_init(void) +{ + struct platform_device *pdev; + + if (add_cpufreq_dev) { + pdev = platform_device_register_simple("qoriq-cpufreq", -1, + NULL, 0); + if (IS_ERR(pdev)) + pr_err("Couldn't register qoriq-cpufreq err=%ld\n", + PTR_ERR(pdev)); + } + return 0; +} +device_initcall(clockgen_cpufreq_init); + CLK_OF_DECLARE(qoriq_clockgen_1, "fsl,qoriq-clockgen-1.0", clockgen_init); CLK_OF_DECLARE(qoriq_clockgen_2, "fsl,qoriq-clockgen-2.0", clockgen_init); CLK_OF_DECLARE(qoriq_clockgen_b4420, "fsl,b4420-clockgen", clockgen_init); diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index c3e6bd59e920..e91750132552 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -323,7 +323,8 @@ endif config QORIQ_CPUFREQ tristate "CPU frequency scaling driver for Freescale QorIQ SoCs" - depends on OF && COMMON_CLK && (PPC_E500MC || ARM || ARM64) + depends on OF && COMMON_CLK + depends on PPC_E500MC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST select CLK_QORIQ help This adds the CPUFreq driver support for Freescale QorIQ SoCs diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 15c1a1231516..9481292981f0 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -317,6 +317,7 @@ config ARM_TEGRA186_CPUFREQ config ARM_TI_CPUFREQ bool "Texas Instruments CPUFreq support" depends on ARCH_OMAP2PLUS + default ARCH_OMAP2PLUS help This driver enables valid OPPs on the running platform based on values contained within the SoC in use. Enable this in order to diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index cb9db16bea61..e8e20fef400b 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -53,6 +53,7 @@ static const struct of_device_id whitelist[] __initconst = { { .compatible = "renesas,r7s72100", }, { .compatible = "renesas,r8a73a4", }, { .compatible = "renesas,r8a7740", }, + { .compatible = "renesas,r8a7742", }, { .compatible = "renesas,r8a7743", }, { .compatible = "renesas,r8a7744", }, { .compatible = "renesas,r8a7745", }, @@ -105,6 +106,7 @@ static const struct of_device_id blacklist[] __initconst = { { .compatible = "calxeda,highbank", }, { .compatible = "calxeda,ecx-2000", }, + { .compatible = "fsl,imx7ulp", }, { .compatible = "fsl,imx7d", }, { .compatible = "fsl,imx8mq", }, { .compatible = "fsl,imx8mm", }, diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 045f9fe157ce..d03f250f68e4 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -2535,26 +2535,27 @@ EXPORT_SYMBOL_GPL(cpufreq_update_limits); static int cpufreq_boost_set_sw(int state) { struct cpufreq_policy *policy; - int ret = -EINVAL; for_each_active_policy(policy) { + int ret; + if (!policy->freq_table) - continue; + return -ENXIO; ret = cpufreq_frequency_table_cpuinfo(policy, policy->freq_table); if (ret) { pr_err("%s: Policy frequency update failed\n", __func__); - break; + return ret; } ret = freq_qos_update_request(policy->max_freq_req, policy->max); if (ret < 0) - break; + return ret; } - return ret; + return 0; } int cpufreq_boost_trigger_state(int state) diff --git a/drivers/cpufreq/imx-cpufreq-dt.c b/drivers/cpufreq/imx-cpufreq-dt.c index de206d2745fe..3fe9125156b4 100644 --- a/drivers/cpufreq/imx-cpufreq-dt.c +++ b/drivers/cpufreq/imx-cpufreq-dt.c @@ -3,7 +3,9 @@ * Copyright 2019 NXP */ +#include <linux/clk.h> #include <linux/cpu.h> +#include <linux/cpufreq.h> #include <linux/err.h> #include <linux/init.h> #include <linux/kernel.h> @@ -12,8 +14,11 @@ #include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_opp.h> +#include <linux/regulator/consumer.h> #include <linux/slab.h> +#include "cpufreq-dt.h" + #define OCOTP_CFG3_SPEED_GRADE_SHIFT 8 #define OCOTP_CFG3_SPEED_GRADE_MASK (0x3 << 8) #define IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK (0xf << 8) @@ -22,20 +27,92 @@ #define IMX8MP_OCOTP_CFG3_MKT_SEGMENT_SHIFT 5 #define IMX8MP_OCOTP_CFG3_MKT_SEGMENT_MASK (0x3 << 5) +#define IMX7ULP_MAX_RUN_FREQ 528000 + /* cpufreq-dt device registered by imx-cpufreq-dt */ static struct platform_device *cpufreq_dt_pdev; static struct opp_table *cpufreq_opp_table; +static struct device *cpu_dev; + +enum IMX7ULP_CPUFREQ_CLKS { + ARM, + CORE, + SCS_SEL, + HSRUN_CORE, + HSRUN_SCS_SEL, + FIRC, +}; + +static struct clk_bulk_data imx7ulp_clks[] = { + { .id = "arm" }, + { .id = "core" }, + { .id = "scs_sel" }, + { .id = "hsrun_core" }, + { .id = "hsrun_scs_sel" }, + { .id = "firc" }, +}; + +static unsigned int imx7ulp_get_intermediate(struct cpufreq_policy *policy, + unsigned int index) +{ + return clk_get_rate(imx7ulp_clks[FIRC].clk); +} + +static int imx7ulp_target_intermediate(struct cpufreq_policy *policy, + unsigned int index) +{ + unsigned int newfreq = policy->freq_table[index].frequency; + + clk_set_parent(imx7ulp_clks[SCS_SEL].clk, imx7ulp_clks[FIRC].clk); + clk_set_parent(imx7ulp_clks[HSRUN_SCS_SEL].clk, imx7ulp_clks[FIRC].clk); + + if (newfreq > IMX7ULP_MAX_RUN_FREQ) + clk_set_parent(imx7ulp_clks[ARM].clk, + imx7ulp_clks[HSRUN_CORE].clk); + else + clk_set_parent(imx7ulp_clks[ARM].clk, imx7ulp_clks[CORE].clk); + + return 0; +} + +static struct cpufreq_dt_platform_data imx7ulp_data = { + .target_intermediate = imx7ulp_target_intermediate, + .get_intermediate = imx7ulp_get_intermediate, +}; static int imx_cpufreq_dt_probe(struct platform_device *pdev) { - struct device *cpu_dev = get_cpu_device(0); + struct platform_device *dt_pdev; u32 cell_value, supported_hw[2]; int speed_grade, mkt_segment; int ret; + cpu_dev = get_cpu_device(0); + if (!of_find_property(cpu_dev->of_node, "cpu-supply", NULL)) return -ENODEV; + if (of_machine_is_compatible("fsl,imx7ulp")) { + ret = clk_bulk_get(cpu_dev, ARRAY_SIZE(imx7ulp_clks), + imx7ulp_clks); + if (ret) + return ret; + + dt_pdev = platform_device_register_data(NULL, "cpufreq-dt", + -1, &imx7ulp_data, + sizeof(imx7ulp_data)); + if (IS_ERR(dt_pdev)) { + clk_bulk_put(ARRAY_SIZE(imx7ulp_clks), imx7ulp_clks); + ret = PTR_ERR(dt_pdev); + dev_err(&pdev->dev, "Failed to register cpufreq-dt: %d\n", ret); + return ret; + } + + cpufreq_dt_pdev = dt_pdev; + + return 0; + } + ret = nvmem_cell_read_u32(cpu_dev, "speed_grade", &cell_value); if (ret) return ret; @@ -98,7 +175,10 @@ static int imx_cpufreq_dt_probe(struct platform_device *pdev) static int imx_cpufreq_dt_remove(struct platform_device *pdev) { platform_device_unregister(cpufreq_dt_pdev); - dev_pm_opp_put_supported_hw(cpufreq_opp_table); + if (!of_machine_is_compatible("fsl,imx7ulp")) + dev_pm_opp_put_supported_hw(cpufreq_opp_table); + else + clk_bulk_put(ARRAY_SIZE(imx7ulp_clks), imx7ulp_clks); return 0; } diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 4d3429b2058f..8e23a698ce04 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -2771,6 +2771,8 @@ static int __init intel_pstate_init(void) pr_info("Invalid MSRs\n"); return -ENODEV; } + /* Without HWP start in the passive mode. */ + default_driver = &intel_cpufreq; hwp_cpu_matched: /* @@ -2816,7 +2818,6 @@ static int __init intel_pstate_setup(char *str) if (!strcmp(str, "disable")) { no_load = 1; } else if (!strcmp(str, "passive")) { - pr_info("Passive mode enabled\n"); default_driver = &intel_cpufreq; no_hwp = 1; } diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c index a1b8238872a2..d06b37822c3d 100644 --- a/drivers/cpufreq/qcom-cpufreq-nvmem.c +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c @@ -277,7 +277,7 @@ static int qcom_cpufreq_probe(struct platform_device *pdev) if (!np) return -ENOENT; - ret = of_device_is_compatible(np, "operating-points-v2-qcom-cpu"); + ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu"); if (!ret) { of_node_put(np); return -ENOENT; diff --git a/drivers/cpufreq/qoriq-cpufreq.c b/drivers/cpufreq/qoriq-cpufreq.c index 8e436dc75c8b..6b6b20da2bcf 100644 --- a/drivers/cpufreq/qoriq-cpufreq.c +++ b/drivers/cpufreq/qoriq-cpufreq.c @@ -18,6 +18,7 @@ #include <linux/of.h> #include <linux/slab.h> #include <linux/smp.h> +#include <linux/platform_device.h> /** * struct cpu_data @@ -29,12 +30,6 @@ struct cpu_data { struct cpufreq_frequency_table *table; }; -/* - * Don't use cpufreq on this SoC -- used when the SoC would have otherwise - * matched a more generic compatible. - */ -#define SOC_BLACKLIST 1 - /** * struct soc_data - SoC specific data * @flags: SOC_xxx @@ -264,64 +259,51 @@ static struct cpufreq_driver qoriq_cpufreq_driver = { .attr = cpufreq_generic_attr, }; -static const struct soc_data blacklist = { - .flags = SOC_BLACKLIST, -}; - -static const struct of_device_id node_matches[] __initconst = { +static const struct of_device_id qoriq_cpufreq_blacklist[] = { /* e6500 cannot use cpufreq due to erratum A-008083 */ - { .compatible = "fsl,b4420-clockgen", &blacklist }, - { .compatible = "fsl,b4860-clockgen", &blacklist }, - { .compatible = "fsl,t2080-clockgen", &blacklist }, - { .compatible = "fsl,t4240-clockgen", &blacklist }, - - { .compatible = "fsl,ls1012a-clockgen", }, - { .compatible = "fsl,ls1021a-clockgen", }, - { .compatible = "fsl,ls1028a-clockgen", }, - { .compatible = "fsl,ls1043a-clockgen", }, - { .compatible = "fsl,ls1046a-clockgen", }, - { .compatible = "fsl,ls1088a-clockgen", }, - { .compatible = "fsl,ls2080a-clockgen", }, - { .compatible = "fsl,lx2160a-clockgen", }, - { .compatible = "fsl,p4080-clockgen", }, - { .compatible = "fsl,qoriq-clockgen-1.0", }, - { .compatible = "fsl,qoriq-clockgen-2.0", }, + { .compatible = "fsl,b4420-clockgen", }, + { .compatible = "fsl,b4860-clockgen", }, + { .compatible = "fsl,t2080-clockgen", }, + { .compatible = "fsl,t4240-clockgen", }, {} }; -static int __init qoriq_cpufreq_init(void) +static int qoriq_cpufreq_probe(struct platform_device *pdev) { int ret; - struct device_node *np; - const struct of_device_id *match; - const struct soc_data *data; - - np = of_find_matching_node(NULL, node_matches); - if (!np) - return -ENODEV; - - match = of_match_node(node_matches, np); - data = match->data; - - of_node_put(np); + struct device_node *np; - if (data && data->flags & SOC_BLACKLIST) + np = of_find_matching_node(NULL, qoriq_cpufreq_blacklist); + if (np) { + dev_info(&pdev->dev, "Disabling due to erratum A-008083"); return -ENODEV; + } ret = cpufreq_register_driver(&qoriq_cpufreq_driver); - if (!ret) - pr_info("Freescale QorIQ CPU frequency scaling driver\n"); + if (ret) + return ret; - return ret; + dev_info(&pdev->dev, "Freescale QorIQ CPU frequency scaling driver\n"); + return 0; } -module_init(qoriq_cpufreq_init); -static void __exit qoriq_cpufreq_exit(void) +static int qoriq_cpufreq_remove(struct platform_device *pdev) { cpufreq_unregister_driver(&qoriq_cpufreq_driver); + + return 0; } -module_exit(qoriq_cpufreq_exit); +static struct platform_driver qoriq_cpufreq_platform_driver = { + .driver = { + .name = "qoriq-cpufreq", + }, + .probe = qoriq_cpufreq_probe, + .remove = qoriq_cpufreq_remove, +}; +module_platform_driver(qoriq_cpufreq_platform_driver); + +MODULE_ALIAS("platform:qoriq-cpufreq"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Tang Yuantian <Yuantian.Tang@freescale.com>"); MODULE_DESCRIPTION("cpufreq driver for Freescale QorIQ series SoCs"); diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index f7240251a949..67d5950bd878 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -330,7 +330,7 @@ struct cpufreq_driver { * * get_intermediate should return a stable intermediate frequency * platform wants to switch to and target_intermediate() should set CPU - * to to that frequency, before jumping to the frequency corresponding + * to that frequency, before jumping to the frequency corresponding * to 'index'. Core will take care of sending notifications and driver * doesn't have to handle them in target_intermediate() or * target_index(). |