diff options
| -rw-r--r-- | drivers/usb/serial/ch341.c | 108 | ||||
| -rw-r--r-- | drivers/usb/serial/kl5kusb105.c | 9 |
2 files changed, 78 insertions, 39 deletions
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 2597b83a8ae2..95aa5233726c 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -95,6 +95,7 @@ struct ch341_private { unsigned baud_rate; /* set baud rate */ u8 line_control; /* set line control value RTS/DTR */ u8 line_status; /* active status of modem control inputs */ + u8 lcr; }; static void ch341_set_termios(struct tty_struct *tty, @@ -112,6 +113,8 @@ static int ch341_control_out(struct usb_device *dev, u8 request, r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, value, index, NULL, 0, DEFAULT_TIMEOUT); + if (r < 0) + dev_err(&dev->dev, "failed to send control message: %d\n", r); return r; } @@ -129,11 +132,24 @@ static int ch341_control_in(struct usb_device *dev, r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, value, index, buf, bufsize, DEFAULT_TIMEOUT); - return r; + if (r < bufsize) { + if (r >= 0) { + dev_err(&dev->dev, + "short control message received (%d < %u)\n", + r, bufsize); + r = -EIO; + } + + dev_err(&dev->dev, "failed to receive control message: %d\n", + r); + return r; + } + + return 0; } -static int ch341_init_set_baudrate(struct usb_device *dev, - struct ch341_private *priv, unsigned ctrl) +static int ch341_set_baudrate_lcr(struct usb_device *dev, + struct ch341_private *priv, u8 lcr) { short a; int r; @@ -156,9 +172,19 @@ static int ch341_init_set_baudrate(struct usb_device *dev, factor = 0x10000 - factor; a = (factor & 0xff00) | divisor; - /* 0x9c is "enable SFR_UART Control register and timer" */ - r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT, - 0x9c | (ctrl << 8), a | 0x80); + /* + * CH341A buffers data until a full endpoint-size packet (32 bytes) + * has been received unless bit 7 is set. + */ + a |= BIT(7); + + r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x1312, a); + if (r) + return r; + + r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x2518, lcr); + if (r) + return r; return r; } @@ -170,9 +196,9 @@ static int ch341_set_handshake(struct usb_device *dev, u8 control) static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) { + const unsigned int size = 2; char *buffer; int r; - const unsigned size = 8; unsigned long flags; buffer = kmalloc(size, GFP_KERNEL); @@ -183,14 +209,9 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) if (r < 0) goto out; - /* setup the private status if available */ - if (r == 2) { - r = 0; - spin_lock_irqsave(&priv->lock, flags); - priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT; - spin_unlock_irqrestore(&priv->lock, flags); - } else - r = -EPROTO; + spin_lock_irqsave(&priv->lock, flags); + priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT; + spin_unlock_irqrestore(&priv->lock, flags); out: kfree(buffer); return r; @@ -200,9 +221,9 @@ out: kfree(buffer); static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) { + const unsigned int size = 2; char *buffer; int r; - const unsigned size = 8; buffer = kmalloc(size, GFP_KERNEL); if (!buffer) @@ -232,7 +253,7 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) if (r < 0) goto out; - r = ch341_init_set_baudrate(dev, priv, 0); + r = ch341_set_baudrate_lcr(dev, priv, priv->lcr); if (r < 0) goto out; @@ -258,7 +279,6 @@ static int ch341_port_probe(struct usb_serial_port *port) spin_lock_init(&priv->lock); priv->baud_rate = DEFAULT_BAUD_RATE; - priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; r = ch341_configure(port->serial->dev, priv); if (r < 0) @@ -320,7 +340,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) r = ch341_configure(serial->dev, priv); if (r) - goto out; + return r; if (tty) ch341_set_termios(tty, port, NULL); @@ -330,12 +350,19 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) if (r) { dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n", __func__, r); - goto out; + return r; } r = usb_serial_generic_open(tty, port); + if (r) + goto err_kill_interrupt_urb; + + return 0; + +err_kill_interrupt_urb: + usb_kill_urb(port->interrupt_in_urb); -out: return r; + return r; } /* Old_termios contains the original termios settings and @@ -356,7 +383,6 @@ static void ch341_set_termios(struct tty_struct *tty, baud_rate = tty_get_baud_rate(tty); - priv->baud_rate = baud_rate; ctrl = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX; switch (C_CSIZE(tty)) { @@ -386,22 +412,25 @@ static void ch341_set_termios(struct tty_struct *tty, ctrl |= CH341_LCR_STOP_BITS_2; if (baud_rate) { - spin_lock_irqsave(&priv->lock, flags); - priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); - spin_unlock_irqrestore(&priv->lock, flags); - r = ch341_init_set_baudrate(port->serial->dev, priv, ctrl); + priv->baud_rate = baud_rate; + + r = ch341_set_baudrate_lcr(port->serial->dev, priv, ctrl); if (r < 0 && old_termios) { priv->baud_rate = tty_termios_baud_rate(old_termios); tty_termios_copy_hw(&tty->termios, old_termios); + } else if (r == 0) { + priv->lcr = ctrl; } - } else { - spin_lock_irqsave(&priv->lock, flags); - priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS); - spin_unlock_irqrestore(&priv->lock, flags); } - ch341_set_handshake(port->serial->dev, priv->line_control); + spin_lock_irqsave(&priv->lock, flags); + if (C_BAUD(tty) == B0) + priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS); + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) + priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); + spin_unlock_irqrestore(&priv->lock, flags); + ch341_set_handshake(port->serial->dev, priv->line_control); } static void ch341_break_ctl(struct tty_struct *tty, int break_state) @@ -576,14 +605,23 @@ static int ch341_tiocmget(struct tty_struct *tty) static int ch341_reset_resume(struct usb_serial *serial) { - struct ch341_private *priv; - - priv = usb_get_serial_port_data(serial->port[0]); + struct usb_serial_port *port = serial->port[0]; + struct ch341_private *priv = usb_get_serial_port_data(port); + int ret; /* reconfigure ch341 serial port after bus-reset */ ch341_configure(serial->dev, priv); - return 0; + if (tty_port_initialized(&port->port)) { + ret = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); + if (ret) { + dev_err(&port->dev, "failed to submit interrupt urb: %d\n", + ret); + return ret; + } + } + + return usb_serial_generic_resume(serial); } static struct usb_serial_driver ch341_device = { diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 0ee190fc1bf8..6cb45757818f 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -192,10 +192,11 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, status_buf, KLSI_STATUSBUF_LEN, 10000 ); - if (rc < 0) - dev_err(&port->dev, "Reading line status failed (error = %d)\n", - rc); - else { + if (rc != KLSI_STATUSBUF_LEN) { + dev_err(&port->dev, "reading line status failed: %d\n", rc); + if (rc >= 0) + rc = -EIO; + } else { status = get_unaligned_le16(status_buf); dev_info(&port->serial->dev->dev, "read status %x %x\n", |