diff options
554 files changed, 10469 insertions, 11431 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index 34f51100f029..dff1f48d252d 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -210,3 +210,15 @@ Users: firmware assigned instance number of the PCI device that can help in understanding the firmware intended order of the PCI device. + +What: /sys/bus/pci/devices/.../d3cold_allowed +Date: July 2012 +Contact: Huang Ying <ying.huang@intel.com> +Description: + d3cold_allowed is bit to control whether the corresponding PCI + device can be put into D3Cold state. If it is cleared, the + device will never be put into D3Cold state. If it is set, the + device may be put into D3Cold state if other requirements are + satisfied too. Reading this attribute will show the current + value of d3cold_allowed bit. Writing this attribute will set + the value of d3cold_allowed bit. diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty index b138b663bf54..0c430150d929 100644 --- a/Documentation/ABI/testing/sysfs-tty +++ b/Documentation/ABI/testing/sysfs-tty @@ -17,3 +17,12 @@ Description: device, like 'tty1'. The file supports poll() to detect virtual console switches. + +What: /sys/class/tty/ttyS0/uartclk +Date: Sep 2012 +Contact: Tomas Hlavacek <tmshlvck@gmail.com> +Description: + Shows the current uartclk value associated with the + UART port in serial_core, that is bound to TTY like ttyS0. + uartclk = 16 * baud_base + diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index ccdd0e53451f..d0051a750587 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -36,6 +36,9 @@ Boards: - OMAP3 BeagleBoard : Low cost community board compatible = "ti,omap3-beagle", "ti,omap3" +- OMAP3 Tobi with Overo : Commercial expansion board with daughter board + compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3" + - OMAP4 SDP : Software Developement Board compatible = "ti,omap4-sdp", "ti,omap4430" diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt index 16695d9cf1e8..66788fda1db3 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt @@ -11,6 +11,11 @@ Required properties: - interrupt-controller: Mark the device node as an interrupt controller The first cell is the GPIO number. The second cell is not used. +- ti,use-leds : Enables LEDA and LEDB outputs if set +- ti,debounce : if n-th bit is set, debounces GPIO-n +- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1) +- ti,pullups : if n-th bit is set, set a pullup on GPIO-n +- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n Example: @@ -20,4 +25,5 @@ twl_gpio: gpio { gpio-controller; #interrupt-cells = <2>; interrupt-controller; + ti,use-leds; }; diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index 1a85f986961b..2f5322b119eb 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -56,3 +56,4 @@ stm,m41t00 Serial Access TIMEKEEPER stm,m41t62 Serial real-time clock (RTC) with alarm stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS ti,tsc2003 I2C Touch-Screen Controller +ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt b/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt new file mode 100644 index 000000000000..9ceb19e0c7fd --- /dev/null +++ b/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt @@ -0,0 +1,52 @@ +* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin + +Required properties: +- compatible : Should be "jedec,lpddr2-timings" +- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32> +- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32> + +Optional properties: + +The following properties represent AC timing parameters from the memory +data-sheet of the device for a given speed-bin. All these properties are +of type <u32> and the default unit is ps (pico seconds). Parameters with +a different unit have a suffix indicating the unit such as 'tRAS-max-ns' +- tRCD +- tWR +- tRAS-min +- tRRD +- tWTR +- tXP +- tRTP +- tDQSCK-max +- tFAW +- tZQCS +- tZQinit +- tRPab +- tZQCL +- tCKESR +- tRAS-max-ns +- tDQSCK-max-derated + +Example: + +timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <400000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; +}; diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2.txt b/Documentation/devicetree/bindings/lpddr2/lpddr2.txt new file mode 100644 index 000000000000..58354a075e13 --- /dev/null +++ b/Documentation/devicetree/bindings/lpddr2/lpddr2.txt @@ -0,0 +1,102 @@ +* LPDDR2 SDRAM memories compliant to JEDEC JESD209-2 + +Required properties: +- compatible : Should be one of - "jedec,lpddr2-nvm", "jedec,lpddr2-s2", + "jedec,lpddr2-s4" + + "ti,jedec-lpddr2-s2" should be listed if the memory part is LPDDR2-S2 type + + "ti,jedec-lpddr2-s4" should be listed if the memory part is LPDDR2-S4 type + + "ti,jedec-lpddr2-nvm" should be listed if the memory part is LPDDR2-NVM type + +- density : <u32> representing density in Mb (Mega bits) + +- io-width : <u32> representing bus width. Possible values are 8, 16, and 32 + +Optional properties: + +The following optional properties represent the minimum value of some AC +timing parameters of the DDR device in terms of number of clock cycles. +These values shall be obtained from the device data-sheet. +- tRRD-min-tck +- tWTR-min-tck +- tXP-min-tck +- tRTP-min-tck +- tCKE-min-tck +- tRPab-min-tck +- tRCD-min-tck +- tWR-min-tck +- tRASmin-min-tck +- tCKESR-min-tck +- tFAW-min-tck + +Child nodes: +- The lpddr2 node may have one or more child nodes of type "lpddr2-timings". + "lpddr2-timings" provides AC timing parameters of the device for + a given speed-bin. The user may provide the timings for as many + speed-bins as is required. Please see Documentation/devicetree/ + bindings/lpddr2/lpddr2-timings.txt for more information on "lpddr2-timings" + +Example: + +elpida_ECB240ABACN : lpddr2 { + compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4"; + density = <2048>; + io-width = <32>; + + tRPab-min-tck = <3>; + tRCD-min-tck = <3>; + tWR-min-tck = <3>; + tRASmin-min-tck = <3>; + tRRD-min-tck = <2>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tRTP-min-tck = <2>; + tCKE-min-tck = <3>; + tCKESR-min-tck = <3>; + tFAW-min-tck = <8>; + + timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <400000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + }; + + timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <200000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <10000>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + }; + +} diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt new file mode 100644 index 000000000000..938f8e1ba205 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -0,0 +1,55 @@ +* EMIF family of TI SDRAM controllers + +EMIF - External Memory Interface - is an SDRAM controller used in +TI SoCs. EMIF supports, based on the IP revision, one or more of +DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance +of the EMIF IP and memory parts attached to it. + +Required properties: +- compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev> + is the IP revision of the specific EMIF instance. + +- phy-type : <u32> indicating the DDR phy type. Following are the + allowed values + <1> : Attila PHY + <2> : Intelli PHY + +- device-handle : phandle to a "lpddr2" node representing the memory part + +- ti,hwmods : For TI hwmods processing and omap device creation + the value shall be "emif<n>" where <n> is the number of the EMIF + instance with base 1. + +Optional properties: +- cs1-used : Have this property if CS1 of this EMIF + instance has a memory part attached to it. If there is a memory + part attached to CS1, it should be the same type as the one on CS0, + so there is no need to give the details of this memory part. + +- cal-resistor-per-cs : Have this property if the board has one + calibration resistor per chip-select. + +- hw-caps-read-idle-ctrl: Have this property if the controller + supports read idle window programming + +- hw-caps-dll-calib-ctrl: Have this property if the controller + supports dll calibration control + +- hw-caps-ll-interface : Have this property if the controller + has a low latency interface and corresponding interrupt events + +- hw-caps-temp-alert : Have this property if the controller + has capability for generating SDRAM temperature alerts + +Example: + +emif1: emif@0x4c000000 { + compatible = "ti,emif-4d"; + ti,hwmods = "emif2"; + phy-type = <1>; + device-handle = <&elpida_ECB240ABACN>; + cs1-used; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; +}; diff --git a/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt b/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt new file mode 100644 index 000000000000..0d439dfc1aa5 --- /dev/null +++ b/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt @@ -0,0 +1,14 @@ +* NXP LPC32xx SoC High Speed UART + +Required properties: +- compatible: Should be "nxp,lpc3220-hsuart" +- reg: Should contain registers location and length +- interrupts: Should contain interrupt + +Example: + + uart1: serial@40014000 { + compatible = "nxp,lpc3220-hsuart"; + reg = <0x40014000 0x1000>; + interrupts = <26 0>; + }; diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt index 0847fdeee11a..ba385f2e0ddc 100644 --- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt +++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt @@ -25,6 +25,8 @@ Optional properties: accesses to the UART (e.g. TI davinci). - used-by-rtas : set to indicate that the port is in use by the OpenFirmware RTAS and should not be registered. +- no-loopback-test: set to indicate that the port does not implements loopback + test mode Example: diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index afaff312bf41..f4d8c7105fcd 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -579,7 +579,7 @@ Why: KVM tracepoints provide mostly equivalent information in a much more ---------------------------- What: at91-mci driver ("CONFIG_MMC_AT91") -When: 3.7 +When: 3.8 Why: There are two mci drivers: at91-mci and atmel-mci. The PDC support was added to atmel-mci as a first step to support more chips. Then at91-mci was kept only for old IP versions (on at91rm9200 and diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX index e09468ad3cb1..f7b0c7dc25ef 100644 --- a/Documentation/serial/00-INDEX +++ b/Documentation/serial/00-INDEX @@ -2,8 +2,6 @@ - this file. README.cycladesZ - info on Cyclades-Z firmware loading. -computone.txt - - info on Computone Intelliport II/Plus Multiport Serial Driver. digiepca.txt - info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards. hayes-esp.txt diff --git a/Documentation/serial/computone.txt b/Documentation/serial/computone.txt deleted file mode 100644 index a6a1158ea2ba..000000000000 --- a/Documentation/serial/computone.txt +++ /dev/null @@ -1,520 +0,0 @@ -NOTE: This is an unmaintained driver. It is not guaranteed to work due to -changes made in the tty layer in 2.6. If you wish to take over maintenance of -this driver, contact Michael Warfield <mhw@wittsend.com>. - -Changelog: ----------- -11-01-2001: Original Document - -10-29-2004: Minor misspelling & format fix, update status of driver. - James Nelson <james4765@gmail.com> - -Computone Intelliport II/Plus Multiport Serial Driver ------------------------------------------------------ - -Release Notes For Linux Kernel 2.2 and higher. -These notes are for the drivers which have already been integrated into the -kernel and have been tested on Linux kernels 2.0, 2.2, 2.3, and 2.4. - -Version: 1.2.14 -Date: 11/01/2001 -Historical Author: Andrew Manison <amanison@america.net> -Primary Author: Doug McNash - -This file assumes that you are using the Computone drivers which are -integrated into the kernel sources. For updating the drivers or installing -drivers into kernels which do not already have Computone drivers, please -refer to the instructions in the README.computone file in the driver patch. - - -1. INTRODUCTION - -This driver supports the entire family of Intelliport II/Plus controllers -with the exception of the MicroChannel controllers. It does not support -products previous to the Intelliport II. - -This driver was developed on the v2.0.x Linux tree and has been tested up -to v2.4.14; it will probably not work with earlier v1.X kernels,. - - -2. QUICK INSTALLATION - -Hardware - If you have an ISA card, find a free interrupt and io port. - List those in use with `cat /proc/interrupts` and - `cat /proc/ioports`. Set the card dip switches to a free - address. You may need to configure your BIOS to reserve an - irq for an ISA card. PCI and EISA parameters are set - automagically. Insert card into computer with the power off - before or after drivers installation. - - Note the hardware address from the Computone ISA cards installed into - the system. These are required for editing ip2.c or editing - /etc/modprobe.d/*.conf, or for specification on the modprobe - command line. - - Note that the /etc/modules.conf should be used for older (pre-2.6) - kernels. - -Software - - -Module installation: - -a) Determine free irq/address to use if any (configure BIOS if need be) -b) Run "make config" or "make menuconfig" or "make xconfig" - Select (m) module for CONFIG_COMPUTONE under character - devices. CONFIG_PCI and CONFIG_MODULES also may need to be set. -c) Set address on ISA cards then: - edit /usr/src/linux/drivers/char/ip2.c if needed - or - edit config file in /etc/modprobe.d/ if needed (module). - or both to match this setting. -d) Run "make modules" -e) Run "make modules_install" -f) Run "/sbin/depmod -a" -g) install driver using `modprobe ip2 <options>` (options listed below) -h) run ip2mkdev (either the script below or the binary version) - - -Kernel installation: - -a) Determine free irq/address to use if any (configure BIOS if need be) -b) Run "make config" or "make menuconfig" or "make xconfig" - Select (y) kernel for CONFIG_COMPUTONE under character - devices. CONFIG_PCI may need to be set if you have PCI bus. -c) Set address on ISA cards then: - edit /usr/src/linux/drivers/char/ip2.c - (Optional - may be specified on kernel command line now) -d) Run "make zImage" or whatever target you prefer. -e) mv /usr/src/linux/arch/x86/boot/zImage to /boot. -f) Add new config for this kernel into /etc/lilo.conf, run "lilo" - or copy to a floppy disk and boot from that floppy disk. -g) Reboot using this kernel -h) run ip2mkdev (either the script below or the binary version) - -Kernel command line options: - -When compiling the driver into the kernel, io and irq may be -compiled into the driver by editing ip2.c and setting the values for -io and irq in the appropriate array. An alternative is to specify -a command line parameter to the kernel at boot up. - - ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3 - -Note that this order is very different from the specifications for the -modload parameters which have separate IRQ and IO specifiers. - -The io port also selects PCI (1) and EISA (2) boards. - - io=0 No board - io=1 PCI board - io=2 EISA board - else ISA board io address - -You only need to specify the boards which are present. - - Examples: - - 2 PCI boards: - - ip2=1,0,1,0 - - 1 ISA board at 0x310 irq 5: - - ip2=0x310,5 - -This can be added to and "append" option in lilo.conf similar to this: - - append="ip2=1,0,1,0" - - -3. INSTALLATION - -Previously, the driver sources were packaged with a set of patch files -to update the character drivers' makefile and configuration file, and other -kernel source files. A build script (ip2build) was included which applies -the patches if needed, and build any utilities needed. -What you receive may be a single patch file in conventional kernel -patch format build script. That form can also be applied by -running patch -p1 < ThePatchFile. Otherwise run ip2build. - -The driver can be installed as a module (recommended) or built into the -kernel. This is selected as for other drivers through the `make config` -command from the root of the Linux source tree. If the driver is built -into the kernel you will need to edit the file ip2.c to match the boards -you are installing. See that file for instructions. If the driver is -installed as a module the configuration can also be specified on the -modprobe command line as follows: - - modprobe ip2 irq=irq1,irq2,irq3,irq4 io=addr1,addr2,addr3,addr4 - -where irqnum is one of the valid Intelliport II interrupts (3,4,5,7,10,11, -12,15) and addr1-4 are the base addresses for up to four controllers. If -the irqs are not specified the driver uses the default in ip2.c (which -selects polled mode). If no base addresses are specified the defaults in -ip2.c are used. If you are autoloading the driver module with kerneld or -kmod the base addresses and interrupt number must also be set in ip2.c -and recompile or just insert and options line in /etc/modprobe.d/*.conf or both. -The options line is equivalent to the command line and takes precedence over -what is in ip2.c. - -config sample to put /etc/modprobe.d/*.conf: - options ip2 io=1,0x328 irq=1,10 - alias char-major-71 ip2 - alias char-major-72 ip2 - alias char-major-73 ip2 - -The equivalent in ip2.c: - -static int io[IP2_MAX_BOARDS]= { 1, 0x328, 0, 0 }; -static int irq[IP2_MAX_BOARDS] = { 1, 10, -1, -1 }; - -The equivalent for the kernel command line (in lilo.conf): - - append="ip2=1,1,0x328,10" - - -Note: Both io and irq should be updated to reflect YOUR system. An "io" - address of 1 or 2 indicates a PCI or EISA card in the board table. - The PCI or EISA irq will be assigned automatically. - -Specifying an invalid or in-use irq will default the driver into -running in polled mode for that card. If all irq entries are 0 then -all cards will operate in polled mode. - -If you select the driver as part of the kernel run : - - make zlilo (or whatever you do to create a bootable kernel) - -If you selected a module run : - - make modules && make modules_install - -The utility ip2mkdev (see 5 and 7 below) creates all the device nodes -required by the driver. For a device to be created it must be configured -in the driver and the board must be installed. Only devices corresponding -to real IntelliPort II ports are created. With multiple boards and expansion -boxes this will leave gaps in the sequence of device names. ip2mkdev uses -Linux tty naming conventions: ttyF0 - ttyF255 for normal devices, and -cuf0 - cuf255 for callout devices. - - -4. USING THE DRIVERS - -As noted above, the driver implements the ports in accordance with Linux -conventions, and the devices should be interchangeable with the standard -serial devices. (This is a key point for problem reporting: please make -sure that what you are trying do works on the ttySx/cuax ports first; then -tell us what went wrong with the ip2 ports!) - -Higher speeds can be obtained using the setserial utility which remaps -38,400 bps (extb) to 57,600 bps, 115,200 bps, or a custom speed. -Intelliport II installations using the PowerPort expansion module can -use the custom speed setting to select the highest speeds: 153,600 bps, -230,400 bps, 307,200 bps, 460,800bps and 921,600 bps. The base for -custom baud rate configuration is fixed at 921,600 for cards/expansion -modules with ST654's and 115200 for those with Cirrus CD1400's. This -corresponds to the maximum bit rates those chips are capable. -For example if the baud base is 921600 and the baud divisor is 18 then -the custom rate is 921600/18 = 51200 bps. See the setserial man page for -complete details. Of course if stty accepts the higher rates now you can -use that as well as the standard ioctls(). - - -5. ip2mkdev and assorted utilities... - -Several utilities, including the source for a binary ip2mkdev utility are -available under .../drivers/char/ip2. These can be build by changing to -that directory and typing "make" after the kernel has be built. If you do -not wish to compile the binary utilities, the shell script below can be -cut out and run as "ip2mkdev" to create the necessary device files. To -use the ip2mkdev script, you must have procfs enabled and the proc file -system mounted on /proc. - - -6. NOTES - -This is a release version of the driver, but it is impossible to test it -in all configurations of Linux. If there is any anomalous behaviour that -does not match the standard serial port's behaviour please let us know. - - -7. ip2mkdev shell script - -Previously, this script was simply attached here. It is now attached as a -shar archive to make it easier to extract the script from the documentation. -To create the ip2mkdev shell script change to a convenient directory (/tmp -works just fine) and run the following command: - - unshar Documentation/serial/computone.txt - (This file) - -You should now have a file ip2mkdev in your current working directory with -permissions set to execute. Running that script with then create the -necessary devices for the Computone boards, interfaces, and ports which -are present on you system at the time it is run. - - -#!/bin/sh -# This is a shell archive (produced by GNU sharutils 4.2.1). -# To extract the files from this archive, save it to some FILE, remove -# everything before the `!/bin/sh' line above, then type `sh FILE'. -# -# Made on 2001-10-29 10:32 EST by <mhw@alcove.wittsend.com>. -# Source directory was `/home2/src/tmp'. -# -# Existing files will *not* be overwritten unless `-c' is specified. -# -# This shar contains: -# length mode name -# ------ ---------- ------------------------------------------ -# 4251 -rwxr-xr-x ip2mkdev -# -save_IFS="${IFS}" -IFS="${IFS}:" -gettext_dir=FAILED -locale_dir=FAILED -first_param="$1" -for dir in $PATH -do - if test "$gettext_dir" = FAILED && test -f $dir/gettext \ - && ($dir/gettext --version >/dev/null 2>&1) - then - set `$dir/gettext --version 2>&1` - if test "$3" = GNU - then - gettext_dir=$dir - fi - fi - if test "$locale_dir" = FAILED && test -f $dir/shar \ - && ($dir/shar --print-text-domain-dir >/dev/null 2>&1) - then - locale_dir=`$dir/shar --print-text-domain-dir` - fi -done -IFS="$save_IFS" -if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED -then - echo=echo -else - TEXTDOMAINDIR=$locale_dir - export TEXTDOMAINDIR - TEXTDOMAIN=sharutils - export TEXTDOMAIN - echo="$gettext_dir/gettext -s" -fi -if touch -am -t 200112312359.59 $$.touch >/dev/null 2>&1 && test ! -f 200112312359.59 -a -f $$.touch; then - shar_touch='touch -am -t $1$2$3$4$5$6.$7 "$8"' -elif touch -am 123123592001.59 $$.touch >/dev/null 2>&1 && test ! -f 123123592001.59 -a ! -f 123123592001.5 -a -f $$.touch; then - shar_touch='touch -am $3$4$5$6$1$2.$7 "$8"' -elif touch -am 1231235901 $$.touch >/dev/null 2>&1 && test ! -f 1231235901 -a -f $$.touch; then - shar_touch='touch -am $3$4$5$6$2 "$8"' -else - shar_touch=: - echo - $echo 'WARNING: not restoring timestamps. Consider getting and' - $echo "installing GNU \`touch', distributed in GNU File Utilities..." - echo -fi -rm -f 200112312359.59 123123592001.59 123123592001.5 1231235901 $$.touch -# -if mkdir _sh17581; then - $echo 'x -' 'creating lock directory' -else - $echo 'failed to create lock directory' - exit 1 -fi -# ============= ip2mkdev ============== -if test -f 'ip2mkdev' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'ip2mkdev' '(file already exists)' -else - $echo 'x -' extracting 'ip2mkdev' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'ip2mkdev' && -#!/bin/sh - -# -# ip2mkdev -# -# Make or remove devices as needed for Computone Intelliport drivers -# -# First rule! If the dev file exists and you need it, don't mess -# with it. That prevents us from screwing up open ttys, ownership -# and permissions on a running system! -# -# This script will NOT remove devices that no longer exist if their -# board or interface box has been removed. If you want to get rid -# of them, you can manually do an "rm -f /dev/ttyF* /dev/cuaf*" -# before running this script. Running this script will then recreate -# all the valid devices. -# -# Michael H. Warfield -# /\/\|=mhw=|\/\/ -# mhw@wittsend.com -# -# Updated 10/29/2000 for version 1.2.13 naming convention -# under devfs. /\/\|=mhw=|\/\/ -# -# Updated 03/09/2000 for devfs support in ip2 drivers. /\/\|=mhw=|\/\/ -# -X -if test -d /dev/ip2 ; then -# This is devfs mode... We don't do anything except create symlinks -# from the real devices to the old names! -X cd /dev -X echo "Creating symbolic links to devfs devices" -X for i in `ls ip2` ; do -X if test ! -L ip2$i ; then -X # Remove it incase it wasn't a symlink (old device) -X rm -f ip2$i -X ln -s ip2/$i ip2$i -X fi -X done -X for i in `( cd tts ; ls F* )` ; do -X if test ! -L tty$i ; then -X # Remove it incase it wasn't a symlink (old device) -X rm -f tty$i -X ln -s tts/$i tty$i -X fi -X done -X for i in `( cd cua ; ls F* )` ; do -X DEVNUMBER=`expr $i : 'F\(.*\)'` -X if test ! -L cuf$DEVNUMBER ; then -X # Remove it incase it wasn't a symlink (old device) -X rm -f cuf$DEVNUMBER -X ln -s cua/$i cuf$DEVNUMBER -X fi -X done -X exit 0 -fi -X -if test ! -f /proc/tty/drivers -then -X echo "\ -Unable to check driver status. -Make sure proc file system is mounted." -X -X exit 255 -fi -X -if test ! -f /proc/tty/driver/ip2 -then -X echo "\ -Unable to locate ip2 proc file. -Attempting to load driver" -X -X if /sbin/insmod ip2 -X then -X if test ! -f /proc/tty/driver/ip2 -X then -X echo "\ -Unable to locate ip2 proc file after loading driver. -Driver initialization failure or driver version error. -" -X exit 255 -X fi -X else -X echo "Unable to load ip2 driver." -X exit 255 -X fi -fi -X -# Ok... So we got the driver loaded and we can locate the procfs files. -# Next we need our major numbers. -X -TTYMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/tt/!d' -e 's/.*tt[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers` -CUAMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/cu/!d' -e 's/.*cu[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers` -BRDMAJOR=`sed -e '/^Driver: /!d' -e 's/.*IMajor=\([0-9]*\)[ ]*.*/\1/' < /proc/tty/driver/ip2` -X -echo "\ -TTYMAJOR = $TTYMAJOR -CUAMAJOR = $CUAMAJOR -BRDMAJOR = $BRDMAJOR -" -X -# Ok... Now we should know our major numbers, if appropriate... -# Now we need our boards and start the device loops. -X -grep '^Board [0-9]:' /proc/tty/driver/ip2 | while read token number type alltherest -do -X # The test for blank "type" will catch the stats lead-in lines -X # if they exist in the file -X if test "$type" = "vacant" -o "$type" = "Vacant" -o "$type" = "" -X then -X continue -X fi -X -X BOARDNO=`expr "$number" : '\([0-9]\):'` -X PORTS=`expr "$alltherest" : '.*ports=\([0-9]*\)' | tr ',' ' '` -X MINORS=`expr "$alltherest" : '.*minors=\([0-9,]*\)' | tr ',' ' '` -X -X if test "$BOARDNO" = "" -o "$PORTS" = "" -X then -# This may be a bug. We should at least get this much information -X echo "Unable to process board line" -X continue -X fi -X -X if test "$MINORS" = "" -X then -# Silently skip this one. This board seems to have no boxes -X continue -X fi -X -X echo "board $BOARDNO: $type ports = $PORTS; port numbers = $MINORS" -X -X if test "$BRDMAJOR" != "" -X then -X BRDMINOR=`expr $BOARDNO \* 4` -X STSMINOR=`expr $BRDMINOR + 1` -X if test ! -c /dev/ip2ipl$BOARDNO ; then -X mknod /dev/ip2ipl$BOARDNO c $BRDMAJOR $BRDMINOR -X fi -X if test ! -c /dev/ip2stat$BOARDNO ; then -X mknod /dev/ip2stat$BOARDNO c $BRDMAJOR $STSMINOR -X fi -X fi -X -X if test "$TTYMAJOR" != "" -X then -X PORTNO=$BOARDBASE -X -X for PORTNO in $MINORS -X do -X if test ! -c /dev/ttyF$PORTNO ; then -X # We got the hardware but no device - make it -X mknod /dev/ttyF$PORTNO c $TTYMAJOR $PORTNO -X fi -X done -X fi -X -X if test "$CUAMAJOR" != "" -X then -X PORTNO=$BOARDBASE -X -X for PORTNO in $MINORS -X do -X if test ! -c /dev/cuf$PORTNO ; then -X # We got the hardware but no device - make it -X mknod /dev/cuf$PORTNO c $CUAMAJOR $PORTNO -X fi -X done -X fi -done -X -Xexit 0 -SHAR_EOF - (set 20 01 10 29 10 32 01 'ip2mkdev'; eval "$shar_touch") && - chmod 0755 'ip2mkdev' || - $echo 'restore of' 'ip2mkdev' 'failed' - if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ - && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then - md5sum -c << SHAR_EOF >/dev/null 2>&1 \ - || $echo 'ip2mkdev:' 'MD5 check failed' -cb5717134509f38bad9fde6b1f79b4a4 ip2mkdev -SHAR_EOF - else - shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'ip2mkdev'`" - test 4251 -eq "$shar_count" || - $echo 'ip2mkdev:' 'original size' '4251,' 'current size' "$shar_count!" - fi -fi -rm -fr _sh17581 -exit 0 @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 6 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Saber-toothed Squirrel # *DOCUMENTATION* diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c index 3ea809430eda..5d5865204a1d 100644 --- a/arch/alpha/kernel/srmcons.c +++ b/arch/alpha/kernel/srmcons.c @@ -223,6 +223,7 @@ srmcons_init(void) driver->subtype = SYSTEM_TYPE_SYSCONS; driver->init_termios = tty_std_termios; tty_set_operations(driver, &srmcons_ops); + tty_port_link_device(&srmcons_singleton.port, driver, 0); err = tty_register_driver(driver); if (err) { put_tty_driver(driver); diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 93d2fab25b30..de325f4615bd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -6,7 +6,7 @@ config ARM select HAVE_DMA_API_DEBUG select HAVE_IDE if PCI || ISA || PCMCIA select HAVE_DMA_ATTRS - select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7) + select HAVE_DMA_CONTIGUOUS if MMU select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index a9af4db7234c..c634f87e230e 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -17,4 +17,64 @@ device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + + ocp { + uart1: serial@44e09000 { + status = "okay"; + }; + + i2c1: i2c@44e0b000 { + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + }; + }; +}; + +/include/ "tps65217.dtsi" + +&tps { + regulators { + dcdc1_reg: regulator@0 { + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-always-on; + }; + }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index d6a97d9eff72..185d6325a458 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -17,4 +17,104 @@ device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + + ocp { + uart1: serial@44e09000 { + status = "okay"; + }; + + i2c1: i2c@44e0b000 { + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; + }; + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +/include/ "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-always-on; + }; + }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index bd0cff3f808c..bb31bff01998 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -69,95 +69,146 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x44e07000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <96>; }; - gpio2: gpio@4804C000 { + gpio2: gpio@4804c000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x4804c000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <98>; }; - gpio3: gpio@481AC000 { + gpio3: gpio@481ac000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x481ac000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <32>; }; - gpio4: gpio@481AE000 { + gpio4: gpio@481ae000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x481ae000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <62>; }; - uart1: serial@44E09000 { + uart1: serial@44e09000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart1"; clock-frequency = <48000000>; + reg = <0x44e09000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <72>; + status = "disabled"; }; uart2: serial@48022000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart2"; clock-frequency = <48000000>; + reg = <0x48022000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <73>; + status = "disabled"; }; uart3: serial@48024000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart3"; clock-frequency = <48000000>; + reg = <0x48024000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <74>; + status = "disabled"; }; - uart4: serial@481A6000 { + uart4: serial@481a6000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart4"; clock-frequency = <48000000>; + reg = <0x481a6000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <44>; + status = "disabled"; }; - uart5: serial@481A8000 { + uart5: serial@481a8000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart5"; clock-frequency = <48000000>; + reg = <0x481a8000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <45>; + status = "disabled"; }; - uart6: serial@481AA000 { + uart6: serial@481aa000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart6"; clock-frequency = <48000000>; + reg = <0x481aa000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <46>; + status = "disabled"; }; - i2c1: i2c@44E0B000 { + i2c1: i2c@44e0b000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; + reg = <0x44e0b000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <70>; + status = "disabled"; }; - i2c2: i2c@4802A000 { + i2c2: i2c@4802a000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; + reg = <0x4802a000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <71>; + status = "disabled"; }; - i2c3: i2c@4819C000 { + i2c3: i2c@4819c000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; + reg = <0x4819c000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <30>; + status = "disabled"; }; wdt2: wdt@44e35000 { compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; + reg = <0x44e35000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <91>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 7829a4d0cb22..96514c134e54 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -15,7 +15,7 @@ compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; chosen { - bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; }; ahb { diff --git a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi new file mode 100644 index 000000000000..f97f70f83374 --- /dev/null +++ b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi @@ -0,0 +1,67 @@ +/* + * Common devices used in different OMAP boards + */ + +/ { + elpida_ECB240ABACN: lpddr2 { + compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4"; + density = <2048>; + io-width = <32>; + + tRPab-min-tck = <3>; + tRCD-min-tck = <3>; + tWR-min-tck = <3>; + tRASmin-min-tck = <3>; + tRRD-min-tck = <2>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tRTP-min-tck = <2>; + tCKE-min-tck = <3>; + tCKESR-min-tck = <3>; + tFAW-min-tck = <8>; + + timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <400000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + + timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <200000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <10000>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 25b50b759dec..77b84e17c477 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap2.dtsi" +/include/ "omap2420.dtsi" / { model = "TI OMAP2420 H4 board"; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi new file mode 100644 index 000000000000..bfd76b4a0ddc --- /dev/null +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -0,0 +1,48 @@ +/* + * Device Tree Source for OMAP2420 SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap2.dtsi" + +/ { + compatible = "ti,omap2420", "ti,omap2"; + + ocp { + omap2420_pmx: pinmux@48000030 { + compatible = "ti,omap2420-padconf", "pinctrl-single"; + reg = <0x48000030 0x0113>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <8>; + pinctrl-single,function-mask = <0x3f>; + }; + + mcbsp1: mcbsp@48074000 { + compatible = "ti,omap2420-mcbsp"; + reg = <0x48074000 0xff>; + reg-names = "mpu"; + interrupts = <59>, /* TX interrupt */ + <60>; /* RX interrupt */ + interrupt-names = "tx", "rx"; + interrupt-parent = <&intc>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@48076000 { + compatible = "ti,omap2420-mcbsp"; + reg = <0x48076000 0xff>; + reg-names = "mpu"; + interrupts = <62>, /* TX interrupt */ + <63>; /* RX interrupt */ + interrupt-names = "tx", "rx"; + interrupt-parent = <&intc>; + ti,hwmods = "mcbsp2"; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi new file mode 100644 index 000000000000..4565d9750f4d --- /dev/null +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -0,0 +1,92 @@ +/* + * Device Tree Source for OMAP243x SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap2.dtsi" + +/ { + compatible = "ti,omap2430", "ti,omap2"; + + ocp { + omap2430_pmx: pinmux@49002030 { + compatible = "ti,omap2430-padconf", "pinctrl-single"; + reg = <0x49002030 0x0154>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <8>; + pinctrl-single,function-mask = <0x3f>; + }; + + mcbsp1: mcbsp@48074000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x48074000 0xff>; + reg-names = "mpu"; + interrupts = <64>, /* OCP compliant interrupt */ + <59>, /* TX interrupt */ + <60>, /* RX interrupt */ + <61>; /* RX overflow interrupt */ + interrupt-names = "common", "tx", "rx", "rx_overflow"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@48076000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x48076000 0xff>; + reg-names = "mpu"; + interrupts = <16>, /* OCP compliant interrupt */ + <62>, /* TX interrupt */ + <63>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@4808c000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x4808c000 0xff>; + reg-names = "mpu"; + interrupts = <17>, /* OCP compliant interrupt */ + <89>, /* TX interrupt */ + <90>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; + + mcbsp4: mcbsp@4808e000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x4808e000 0xff>; + reg-names = "mpu"; + interrupts = <18>, /* OCP compliant interrupt */ + <54>, /* TX interrupt */ + <55>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp4"; + }; + + mcbsp5: mcbsp@48096000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x48096000 0xff>; + reg-names = "mpu"; + interrupts = <19>, /* OCP compliant interrupt */ + <81>, /* TX interrupt */ + <82>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp5"; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index cdcb98c7e075..c38cf76df81f 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -7,16 +7,44 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap36xx.dtsi" / { - model = "TI OMAP3 BeagleBoard"; - compatible = "ti,omap3-beagle", "ti,omap3"; + model = "TI OMAP3 BeagleBoard xM"; + compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3"; memory { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; + + leds { + compatible = "gpio-leds"; + pmu_stat { + label = "beagleboard::pmu_stat"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + }; + + heartbeat { + label = "beagleboard::usr0"; + gpios = <&gpio5 22 0>; /* 150 -> D6 LED */ + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "beagleboard::usr1"; + gpios = <&gpio5 21 0>; /* 149 -> D7 LED */ + linux,default-trigger = "mmc0"; + }; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; }; &i2c1 { @@ -27,11 +55,17 @@ interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; - vsim: regulator@10 { + vsim: regulator-vsim { compatible = "ti,twl4030-vsim"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; }; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; }; }; @@ -67,3 +101,15 @@ &mmc3 { status = "disabled"; }; + +&twl_gpio { + ti,use-leds; + /* pullups: BIT(1) */ + ti,pullups = <0x000002>; + /* + * pulldowns: + * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <0x03a1c4>; +}; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index f349ee9182ce..e8ba1c247a39 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -17,6 +17,15 @@ device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + + leds { + compatible = "gpio-leds"; + ledb { + label = "omap3evm::ledb"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + linux,default-trigger = "default-on"; + }; + }; }; &i2c1 { @@ -46,3 +55,7 @@ reg = <0x5c>; }; }; + +&twl_gpio { + ti,use-leds; +}; diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi new file mode 100644 index 000000000000..89808ce01673 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * The Gumstix Overo must be combined with an expansion board. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + overo { + label = "overo:blue:COM"; + gpios = <&twl_gpio 19 0>; + linux,default-trigger = "mmc0"; + }; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +/* i2c2 pins are used for gpio */ +&i2c2 { + status = "disabled"; +}; + +/* on board microSD slot */ +&mmc1 { + vmmc-supply = <&vmmc1>; + bus-width = <4>; +}; + +/* optional on board WiFi */ +&mmc2 { + bus-width = <4>; +}; + +&twl_gpio { + ti,use-leds; +}; diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts new file mode 100644 index 000000000000..a13d12de77ff --- /dev/null +++ b/arch/arm/boot/dts/omap3-tobi.dts @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Tobi expansion board is manufactured by Gumstix Inc. + */ + +/include/ "omap3-overo.dtsi" + +/ { + model = "TI OMAP3 Gumstix Overo on Tobi"; + compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"; + + leds { + compatible = "gpio-leds"; + heartbeat { + label = "overo:red:gpio21"; + gpios = <&gpio1 21 0>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; +}; + +&mmc3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 810947198208..f38ea8771b44 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -17,7 +17,6 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; - serial3 = &uart4; }; cpus { @@ -69,6 +68,24 @@ reg = <0x48200000 0x1000>; }; + omap3_pmx_core: pinmux@48002030 { + compatible = "ti,omap3-padconf", "pinctrl-single"; + reg = <0x48002030 0x05cc>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap3_pmx_wkup: pinmux@0x48002a58 { + compatible = "ti,omap3-padconf", "pinctrl-single"; + reg = <0x48002a58 0x5c>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + gpio1: gpio@48310000 { compatible = "ti,omap3-gpio"; ti,hwmods = "gpio1"; @@ -141,12 +158,6 @@ clock-frequency = <48000000>; }; - uart4: serial@49042000 { - compatible = "ti,omap3-uart"; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - }; - i2c1: i2c@48070000 { compatible = "ti,omap3-i2c"; #address-cells = <1>; @@ -220,5 +231,74 @@ compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; }; + + mcbsp1: mcbsp@48074000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x48074000 0xff>; + reg-names = "mpu"; + interrupts = <16>, /* OCP compliant interrupt */ + <59>, /* TX interrupt */ + <60>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@49022000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x49022000 0xff>, + <0x49028000 0xff>; + reg-names = "mpu", "sidetone"; + interrupts = <17>, /* OCP compliant interrupt */ + <62>, /* TX interrupt */ + <63>, /* RX interrupt */ + <4>; /* Sidetone */ + interrupt-names = "common", "tx", "rx", "sidetone"; + interrupt-parent = <&intc>; + ti,buffer-size = <1280>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@49024000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x49024000 0xff>, + <0x4902a000 0xff>; + reg-names = "mpu", "sidetone"; + interrupts = <22>, /* OCP compliant interrupt */ + <89>, /* TX interrupt */ + <90>, /* RX interrupt */ + <5>; /* Sidetone */ + interrupt-names = "common", "tx", "rx", "sidetone"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; + + mcbsp4: mcbsp@49026000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x49026000 0xff>; + reg-names = "mpu"; + interrupts = <23>, /* OCP compliant interrupt */ + <54>, /* TX interrupt */ + <55>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp4"; + }; + + mcbsp5: mcbsp@48096000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x48096000 0xff>; + reg-names = "mpu"; + interrupts = <27>, /* OCP compliant interrupt */ + <81>, /* TX interrupt */ + <82>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp5"; + }; }; }; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi new file mode 100644 index 000000000000..96bf0287cb9f --- /dev/null +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -0,0 +1,25 @@ +/* + * Device Tree Source for OMAP3 SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap3.dtsi" + +/ { + aliases { + serial3 = &uart4; + }; + + ocp { + uart4: serial@49042000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 9880c12877b3..20b966ee1bb3 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -8,6 +8,7 @@ /dts-v1/; /include/ "omap4.dtsi" +/include/ "elpida_ecb240abacn.dtsi" / { model = "TI OMAP4 PandaBoard"; @@ -126,3 +127,13 @@ ti,non-removable; bus-width = <4>; }; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 72216e932fc0..94a23b39033d 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -8,6 +8,7 @@ /dts-v1/; /include/ "omap4.dtsi" +/include/ "elpida_ecb240abacn.dtsi" / { model = "TI OMAP4 SDP board"; @@ -18,7 +19,7 @@ reg = <0x80000000 0x40000000>; /* 1 GB */ }; - vdd_eth: fixedregulator@0 { + vdd_eth: fixedregulator-vdd-eth { compatible = "regulator-fixed"; regulator-name = "VDD_ETH"; regulator-min-microvolt = <3300000>; @@ -28,7 +29,7 @@ regulator-boot-on; }; - vbat: fixedregulator@2 { + vbat: fixedregulator-vbat { compatible = "regulator-fixed"; regulator-name = "VBAT"; regulator-min-microvolt = <3750000>; @@ -115,6 +116,33 @@ }; }; +&omap4_pmx_core { + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0xd8 0x118 /* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */ + 0xda 0 /* uart2_rts.uart2_rts OUTPUT | MODE0 */ + 0xdc 0x118 /* uart2_rx.uart2_rx INPUT_PULLUP | MODE0 */ + 0xde 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x100 0x118 /* uart3_cts_rctx.uart3_cts_rctx INPUT_PULLUP | MODE0 */ + 0x102 0 /* uart3_rts_sd.uart3_rts_sd OUTPUT | MODE0 */ + 0x104 0x100 /* uart3_rx_irrx.uart3_rx_irrx INPUT | MODE0 */ + 0x106 0 /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + 0x11c 0x100 /* uart4_rx.uart4_rx INPUT | MODE0 */ + 0x11e 0 /* uart4_tx.uart4_tx OUTPUT | MODE0 */ + >; + }; +}; + &i2c1 { clock-frequency = <400000>; @@ -226,3 +254,98 @@ bus-width = <4>; ti,non-removable; }; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = <0x00000012 /* KEY_E */ + 0x00010013 /* KEY_R */ + 0x00020014 /* KEY_T */ + 0x00030066 /* KEY_HOME */ + 0x0004003f /* KEY_F5 */ + 0x000500f0 /* KEY_UNKNOWN */ + 0x00060017 /* KEY_I */ + 0x0007002a /* KEY_LEFTSHIFT */ + 0x01000020 /* KEY_D*/ + 0x01010021 /* KEY_F */ + 0x01020022 /* KEY_G */ + 0x010300e7 /* KEY_SEND */ + 0x01040040 /* KEY_F6 */ + 0x010500f0 /* KEY_UNKNOWN */ + 0x01060025 /* KEY_K */ + 0x0107001c /* KEY_ENTER */ + 0x0200002d /* KEY_X */ + 0x0201002e /* KEY_C */ + 0x0202002f /* KEY_V */ + 0x0203006b /* KEY_END */ + 0x02040041 /* KEY_F7 */ + 0x020500f0 /* KEY_UNKNOWN */ + 0x02060034 /* KEY_DOT */ + 0x0207003a /* KEY_CAPSLOCK */ + 0x0300002c /* KEY_Z */ + 0x0301004e /* KEY_KPLUS */ + 0x03020030 /* KEY_B */ + 0x0303003b /* KEY_F1 */ + 0x03040042 /* KEY_F8 */ + 0x030500f0 /* KEY_UNKNOWN */ + 0x03060018 /* KEY_O */ + 0x03070039 /* KEY_SPACE */ + 0x04000011 /* KEY_W */ + 0x04010015 /* KEY_Y */ + 0x04020016 /* KEY_U */ + 0x0403003c /* KEY_F2 */ + 0x04040073 /* KEY_VOLUMEUP */ + 0x040500f0 /* KEY_UNKNOWN */ + 0x04060026 /* KEY_L */ + 0x04070069 /* KEY_LEFT */ + 0x0500001f /* KEY_S */ + 0x05010023 /* KEY_H */ + 0x05020024 /* KEY_J */ + 0x0503003d /* KEY_F3 */ + 0x05040043 /* KEY_F9 */ + 0x05050072 /* KEY_VOLUMEDOWN */ + 0x05060032 /* KEY_M */ + 0x0507006a /* KEY_RIGHT */ + 0x06000010 /* KEY_Q */ + 0x0601001e /* KEY_A */ + 0x06020031 /* KEY_N */ + 0x0603009e /* KEY_BACK */ + 0x0604000e /* KEY_BACKSPACE */ + 0x060500f0 /* KEY_UNKNOWN */ + 0x06060019 /* KEY_P */ + 0x06070067 /* KEY_UP */ + 0x07000094 /* KEY_PROG1 */ + 0x07010095 /* KEY_PROG2 */ + 0x070200ca /* KEY_PROG3 */ + 0x070300cb /* KEY_PROG4 */ + 0x0704003e /* KEY_F4 */ + 0x070500f0 /* KEY_UNKNOWN */ + 0x07060160 /* KEY_OK */ + 0x0707006c>; /* KEY_DOWN */ + linux,input-no-autorepeat; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 04cbbcb6ff91..5d1c48459e6e 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -30,12 +30,35 @@ cpus { cpu@0 { compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; }; cpu@1 { compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; }; }; + gic: interrupt-controller@48241000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48241000 0x1000>, + <0x48240100 0x0100>; + }; + + L2: l2-cache-controller@48242000 { + compatible = "arm,pl310-cache"; + reg = <0x48242000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + local-timer@0x48240600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x48240600 0x20>; + interrupts = <1 13 0x304>; + }; + /* * The soc node represents the soc top level view. It is uses for IPs * that are not memory mapped in the MPU view or for the MPU itself. @@ -61,30 +84,6 @@ /* * XXX: Use a flat representation of the OMAP4 interconnect. * The real OMAP interconnect network is quite complex. - * - * MPU -+-- MPU_PRIVATE - GIC, L2 - * | - * +----------------+----------+ - * | | | - * + +- EMIF - DDR | - * | | | - * | + +--------+ - * | | | - * | +- L4_ABE - AESS, MCBSP, TIMERs... - * | | - * +- L3_MAIN --+- L4_CORE - IPs... - * | - * +- L4_PER - IPs... - * | - * +- L4_CFG -+- L4_WKUP - IPs... - * | | - * | +- IPs... - * +- IPU ----+ - * | | - * +- DSP ----+ - * | | - * +- DSS ----+ - * * Since that will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. @@ -96,16 +95,27 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; - gic: interrupt-controller@48241000 { - compatible = "arm,cortex-a9-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x48241000 0x1000>, - <0x48240100 0x0100>; + omap4_pmx_core: pinmux@4a100040 { + compatible = "ti,omap4-padconf", "pinctrl-single"; + reg = <0x4a100040 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + omap4_pmx_wkup: pinmux@4a31e040 { + compatible = "ti,omap4-padconf", "pinctrl-single"; + reg = <0x4a31e040 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; }; gpio1: gpio@4a310000 { compatible = "ti,omap4-gpio"; + reg = <0x4a310000 0x200>; + interrupts = <0 29 0x4>; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; @@ -115,6 +125,8 @@ gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; + reg = <0x48055000 0x200>; + interrupts = <0 30 0x4>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -124,6 +136,8 @@ gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; + reg = <0x48057000 0x200>; + interrupts = <0 31 0x4>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -133,6 +147,8 @@ gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; + reg = <0x48059000 0x200>; + interrupts = <0 32 0x4>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -142,6 +158,8 @@ gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; + reg = <0x4805b000 0x200>; + interrupts = <0 33 0x4>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -151,6 +169,8 @@ gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; + reg = <0x4805d000 0x200>; + interrupts = <0 34 0x4>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -160,30 +180,40 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; + reg = <0x4806a000 0x100>; + interrupts = <0 72 0x4>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap4-uart"; + reg = <0x4806c000 0x100>; + interrupts = <0 73 0x4>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; uart3: serial@48020000 { compatible = "ti,omap4-uart"; + reg = <0x48020000 0x100>; + interrupts = <0 74 0x4>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; uart4: serial@4806e000 { compatible = "ti,omap4-uart"; + reg = <0x4806e000 0x100>; + interrupts = <0 70 0x4>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; + reg = <0x48070000 0x100>; + interrupts = <0 56 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -191,6 +221,8 @@ i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; + reg = <0x48072000 0x100>; + interrupts = <0 57 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -198,6 +230,8 @@ i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; + reg = <0x48060000 0x100>; + interrupts = <0 61 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; @@ -205,6 +239,8 @@ i2c4: i2c@48350000 { compatible = "ti,omap4-i2c"; + reg = <0x48350000 0x100>; + interrupts = <0 62 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; @@ -212,6 +248,8 @@ mcspi1: spi@48098000 { compatible = "ti,omap4-mcspi"; + reg = <0x48098000 0x200>; + interrupts = <0 65 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi1"; @@ -220,6 +258,8 @@ mcspi2: spi@4809a000 { compatible = "ti,omap4-mcspi"; + reg = <0x4809a000 0x200>; + interrupts = <0 66 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi2"; @@ -228,6 +268,8 @@ mcspi3: spi@480b8000 { compatible = "ti,omap4-mcspi"; + reg = <0x480b8000 0x200>; + interrupts = <0 91 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi3"; @@ -236,6 +278,8 @@ mcspi4: spi@480ba000 { compatible = "ti,omap4-mcspi"; + reg = <0x480ba000 0x200>; + interrupts = <0 48 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi4"; @@ -244,6 +288,8 @@ mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + interrupts = <0 83 0x4>; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -251,30 +297,40 @@ mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480b4000 0x400>; + interrupts = <0 86 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; }; mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480ad000 0x400>; + interrupts = <0 94 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; }; mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d1000 0x400>; + interrupts = <0 96 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; }; mmc5: mmc@480d5000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d5000 0x400>; + interrupts = <0 59 0x4>; ti,hwmods = "mmc5"; ti,needs-special-reset; }; wdt2: wdt@4a314000 { compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + reg = <0x4a314000 0x80>; + interrupts = <0 80 0x4>; ti,hwmods = "wd_timer2"; }; @@ -282,6 +338,7 @@ compatible = "ti,omap4-mcpdm"; reg = <0x40132000 0x7f>, /* MPU private access */ <0x49032000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; @@ -291,9 +348,87 @@ compatible = "ti,omap4-dmic"; reg = <0x4012e000 0x7f>, /* MPU private access */ <0x4902e000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; interrupt-parent = <&gic>; ti,hwmods = "dmic"; }; + + mcbsp1: mcbsp@40122000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40122000 0xff>, /* MPU private access */ + <0x49022000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 17 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@40124000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40124000 0xff>, /* MPU private access */ + <0x49024000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 22 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@40126000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40126000 0xff>, /* MPU private access */ + <0x49026000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 23 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; + + mcbsp4: mcbsp@48096000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x48096000 0xff>; /* L4 Interconnect */ + reg-names = "mpu"; + interrupts = <0 16 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp4"; + }; + + keypad: keypad@4a31c000 { + compatible = "ti,omap4-keypad"; + reg = <0x4a31c000 0x80>; + interrupts = <0 120 0x4>; + reg-names = "mpu"; + ti,hwmods = "kbd"; + }; + + emif1: emif@4c000000 { + compatible = "ti,emif-4d"; + reg = <0x4c000000 0x100>; + interrupts = <0 110 0x4>; + ti,hwmods = "emif1"; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; + + emif2: emif@4d000000 { + compatible = "ti,emif-4d"; + reg = <0x4d000000 0x100>; + interrupts = <0 111 0x4>; + ti,hwmods = "emif2"; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; }; diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index 200c39ad1c82..9c41a3f311aa 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -17,4 +17,68 @@ device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; + + vmmcsd_fixed: fixedregulator-mmcsd { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + bus-width = <4>; + ti,non-removable; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "disabled"; +}; + +&i2c2 { + clock-frequency = <400000>; + + /* Pressure Sensor */ + bmp085@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + + /* Temperature Sensor */ + tmp102@48{ + compatible = "ti,tmp102"; + reg = <0x48>; + }; +}; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = <0x02020073 /* VOLUP */ + 0x02030072 /* VOLDOWM */ + 0x020400e7 /* SEND */ + 0x02050066 /* HOME */ + 0x0206006b /* END */ + 0x020700d9>; /* SEARCH */ + linux,input-no-autorepeat; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 57e527083746..9ac75b37c992 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -145,6 +145,41 @@ #interrupt-cells = <1>; }; + i2c1: i2c@48070000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + }; + + i2c2: i2c@48072000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + }; + + i2c3: i2c@48060000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; + }; + + i2c4: i2c@4807A000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c4"; + }; + + i2c5: i2c@4807C000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c5"; + }; + uart1: serial@4806a000 { compatible = "ti,omap4-uart"; ti,hwmods = "uart1"; @@ -180,5 +215,97 @@ ti,hwmods = "uart6"; clock-frequency = <48000000>; }; + + mmc1: mmc@4809c000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + }; + + mmc2: mmc@480b4000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + }; + + mmc3: mmc@480ad000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + }; + + mmc4: mmc@480d1000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc4"; + ti,needs-special-reset; + }; + + mmc5: mmc@480d5000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc5"; + ti,needs-special-reset; + }; + + keypad: keypad@4ae1c000 { + compatible = "ti,omap4-keypad"; + ti,hwmods = "kbd"; + }; + + mcpdm: mcpdm@40132000 { + compatible = "ti,omap4-mcpdm"; + reg = <0x40132000 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 112 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "mcpdm"; + }; + + dmic: dmic@4012e000 { + compatible = "ti,omap4-dmic"; + reg = <0x4012e000 0x7f>, /* MPU private access */ + <0x4902e000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 114 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "dmic"; + }; + + mcbsp1: mcbsp@40122000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40122000 0xff>, /* MPU private access */ + <0x49022000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 17 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@40124000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40124000 0xff>, /* MPU private access */ + <0x49024000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 22 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@40126000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40126000 0xff>, /* MPU private access */ + <0x49026000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 23 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; }; }; diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi new file mode 100644 index 000000000000..a63272422d76 --- /dev/null +++ b/arch/arm/boot/dts/tps65217.dtsi @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65217.pdf + */ + +&tps { + compatible = "ti,tps65217"; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: regulator@0 { + reg = <0>; + regulator-compatible = "dcdc1"; + }; + + dcdc2_reg: regulator@1 { + reg = <1>; + regulator-compatible = "dcdc2"; + }; + + dcdc3_reg: regulator@2 { + reg = <2>; + regulator-compatible = "dcdc3"; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-compatible = "ldo1"; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-compatible = "ldo2"; + }; + + ldo3_reg: regulator@5 { + reg = <5>; + regulator-compatible = "ldo3"; + }; + + ldo4_reg: regulator@6 { + reg = <6>; + regulator-compatible = "ldo4"; + }; + }; +}; diff --git a/arch/arm/boot/dts/tps65910.dtsi b/arch/arm/boot/dts/tps65910.dtsi new file mode 100644 index 000000000000..92693a89160e --- /dev/null +++ b/arch/arm/boot/dts/tps65910.dtsi @@ -0,0 +1,86 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65910.pdf + */ + +&tps { + compatible = "ti,tps65910"; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + vrtc_reg: regulator@0 { + reg = <0>; + regulator-compatible = "vrtc"; + }; + + vio_reg: regulator@1 { + reg = <1>; + regulator-compatible = "vio"; + }; + + vdd1_reg: regulator@2 { + reg = <2>; + regulator-compatible = "vdd1"; + }; + + vdd2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "vdd2"; + }; + + vdd3_reg: regulator@4 { + reg = <4>; + regulator-compatible = "vdd3"; + }; + + vdig1_reg: regulator@5 { + reg = <5>; + regulator-compatible = "vdig1"; + }; + + vdig2_reg: regulator@6 { + reg = <6>; + regulator-compatible = "vdig2"; + }; + + vpll_reg: regulator@7 { + reg = <7>; + regulator-compatible = "vpll"; + }; + + vdac_reg: regulator@8 { + reg = <8>; + regulator-compatible = "vdac"; + }; + + vaux1_reg: regulator@9 { + reg = <9>; + regulator-compatible = "vaux1"; + }; + + vaux2_reg: regulator@10 { + reg = <10>; + regulator-compatible = "vaux2"; + }; + + vaux33_reg: regulator@11 { + reg = <11>; + regulator-compatible = "vaux33"; + }; + + vmmc_reg: regulator@12 { + reg = <12>; + regulator-compatible = "vmmc"; + }; + }; +}; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index 22f4d1394ed3..ff000172c93c 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -19,19 +19,19 @@ interrupts = <11>; }; - vdac: regulator@0 { + vdac: regulator-vdac { compatible = "ti,twl4030-vdac"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vpll2: regulator@1 { + vpll2: regulator-vpll2 { compatible = "ti,twl4030-vpll2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vmmc1: regulator@2 { + vmmc1: regulator-vmmc1 { compatible = "ti,twl4030-vmmc1"; regulator-min-microvolt = <1850000>; regulator-max-microvolt = <3150000>; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index d351b27d7213..123e2c40218a 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -20,70 +20,70 @@ interrupts = <11>; }; - vaux1: regulator@0 { + vaux1: regulator-vaux1 { compatible = "ti,twl6030-vaux1"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; }; - vaux2: regulator@1 { + vaux2: regulator-vaux2 { compatible = "ti,twl6030-vaux2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <2800000>; }; - vaux3: regulator@2 { + vaux3: regulator-vaux3 { compatible = "ti,twl6030-vaux3"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; }; - vmmc: regulator@3 { + vmmc: regulator-vmmc { compatible = "ti,twl6030-vmmc"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3000000>; }; - vpp: regulator@4 { + vpp: regulator-vpp { compatible = "ti,twl6030-vpp"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2500000>; }; - vusim: regulator@5 { + vusim: regulator-vusim { compatible = "ti,twl6030-vusim"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <2900000>; }; - vdac: regulator@6 { + vdac: regulator-vdac { compatible = "ti,twl6030-vdac"; }; - vana: regulator@7 { + vana: regulator-vana { compatible = "ti,twl6030-vana"; }; - vcxio: regulator@8 { + vcxio: regulator-vcxio { compatible = "ti,twl6030-vcxio"; regulator-always-on; }; - vusb: regulator@9 { + vusb: regulator-vusb { compatible = "ti,twl6030-vusb"; }; - v1v8: regulator@10 { + v1v8: regulator-v1v8 { compatible = "ti,twl6030-v1v8"; regulator-always-on; }; - v2v1: regulator@11 { + v2v1: regulator-v2v1 { compatible = "ti,twl6030-v2v1"; regulator-always-on; }; - clk32kg: regulator@12 { + clk32kg: regulator-clk32kg { compatible = "ti,twl6030-clk32kg"; }; }; diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index 7d8718468e0d..90610c7030f7 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -33,7 +33,7 @@ CONFIG_AEABI=y CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096" +CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw" CONFIG_CMDLINE_FORCE=y CONFIG_KEXEC=y CONFIG_VFP=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index e58edc36b406..62303043db9c 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -123,6 +123,7 @@ CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=y CONFIG_SPI=y CONFIG_SPI_OMAP24XX=y +CONFIG_PINCTRL_SINGLE=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_TWL4030=y diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 2ae842df4551..5c44dcb0987b 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -203,6 +203,13 @@ static inline void dma_free_writecombine(struct device *dev, size_t size, } /* + * This can be called during early boot to increase the size of the atomic + * coherent DMA pool above the default value of 256KiB. It must be called + * before postcore_initcall. + */ +extern void __init init_dma_coherent_pool_size(unsigned long size); + +/* * This can be called during boot to increase the size of the consistent * DMA region above it's default value of 2MB. It must be called before the * memory allocator is initialised, i.e. before any core_initcall. diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 104ca40d8d18..aaa443b48c91 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void) at91_st_read(AT91_ST_SR); /* Make IRQs happen for the system timer */ - setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq); + setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq); /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used * directly for the clocksource and all clockevents, after adjusting diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 7b9c2ba396ed..bce572a530ef 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -726,6 +726,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, }, }; @@ -744,10 +746,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9260_rtt_device.num_resources = 2; + at91sam9260_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9260_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 8df5c1bdff92..bc2590d712d0 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -609,6 +609,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -626,10 +628,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9261_rtt_device.num_resources = 2; + at91sam9261_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9261_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index eb6bbf86fb9f..9b6ca734f1a9 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -990,6 +990,8 @@ static struct resource rtt0_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1006,6 +1008,8 @@ static struct resource rtt1_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1027,14 +1031,14 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed only for the chosen RTT: * GPBR will serve as the storage for RTC time offset */ - at91sam9263_rtt0_device.num_resources = 2; + at91sam9263_rtt0_device.num_resources = 3; at91sam9263_rtt1_device.num_resources = 1; pdev = &at91sam9263_rtt0_device; r = rtt0_resources; break; case 1: at91sam9263_rtt0_device.num_resources = 1; - at91sam9263_rtt1_device.num_resources = 2; + at91sam9263_rtt1_device.num_resources = 3; pdev = &at91sam9263_rtt1_device; r = rtt1_resources; break; @@ -1047,6 +1051,8 @@ static void __init at91_add_device_rtt_rtc(void) pdev->name = "rtc-at91sam9"; r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; r[1].end = r[1].start + 3; + r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 06073996a382..1b47319ca00b 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1293,6 +1293,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1310,10 +1312,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9g45_rtt_device.num_resources = 2; + at91sam9g45_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9G45_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index f09fff932172..b3d365dadef5 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -688,6 +688,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -705,10 +707,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9rl_rtt_device.num_resources = 2; + at91sam9rl_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9RL_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index de2ec6b8fea7..188c82971ebd 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -63,6 +63,12 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); #define cpu_has_300M_plla() (cpu_is_at91sam9g10()) +#define cpu_has_240M_plla() (cpu_is_at91sam9261() \ + || cpu_is_at91sam9263() \ + || cpu_is_at91sam9rl()) + +#define cpu_has_210M_plla() (cpu_is_at91sam9260()) + #define cpu_has_pllb() (!(cpu_is_at91sam9rl() \ || cpu_is_at91sam9g45() \ || cpu_is_at91sam9x5() \ @@ -706,6 +712,12 @@ static int __init at91_pmc_init(unsigned long main_clock) } else if (cpu_has_800M_plla()) { if (plla.rate_hz > 800000000) pll_overclock = true; + } else if (cpu_has_240M_plla()) { + if (plla.rate_hz > 240000000) + pll_overclock = true; + } else if (cpu_has_210M_plla()) { + if (plla.rate_hz > 210000000) + pll_overclock = true; } else { if (plla.rate_hz > 209000000) pll_overclock = true; diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index ca70e5fcc7ac..020852d3bdd8 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -17,6 +17,7 @@ #include <linux/sched.h> #include <asm/irq.h> #include <asm/mach/irq.h> +#include <asm/system_misc.h> #include <mach/hardware.h> #define IRQ_SOURCE(base_addr) (base_addr + 0x00) diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 3226077735b1..1201191d7f1b 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -517,6 +517,13 @@ void __init kirkwood_wdt_init(void) void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); + + /* + * Some Kirkwood devices allocate their coherent buffers from atomic + * context. Increase size of atomic coherent pool to make sure such + * the allocations won't fail. + */ + init_dma_coherent_pool_size(SZ_1M); } int kirkwood_tclk; diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index d93359379598..be90b7d0e10b 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/sizes.h> #include <linux/platform_device.h> #include <linux/mtd/partitions.h> #include <linux/ata_platform.h> diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index a051cb8ae57f..d2b6acce8fc1 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -18,6 +18,7 @@ #include <plat/board-ams-delta.h> +#include <mach/irqs.h> #include <mach/ams-delta-fiq.h> #include "iomap.h" diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index c53469802c03..6f192c4900b1 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -26,6 +26,7 @@ #include <linux/export.h> #include <linux/omapfb.h> #include <linux/io.h> +#include <linux/platform_data/gpio-omap.h> #include <media/soc_camera.h> @@ -37,7 +38,6 @@ #include <plat/board-ams-delta.h> #include <plat/keypad.h> #include <plat/mux.h> -#include <plat/board.h> #include <mach/hardware.h> #include <mach/ams-delta-fiq.h> diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 6872f3fd400f..6d985521a39e 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -32,7 +32,6 @@ #include <plat/flash.h> #include <plat/fpga.h> #include <plat/keypad.h> -#include <plat/board.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 6ec385e2b98e..04b5fdaff831 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -23,7 +23,6 @@ #include <asm/mach/map.h> #include <plat/mux.h> -#include <plat/board.h> #include <mach/usb.h> @@ -52,9 +51,6 @@ static struct omap_usb_config generic1610_usb_config __initdata = { }; #endif -static struct omap_board_config_kernel generic_config[] __initdata = { -}; - static void __init omap_generic_init(void) { #ifdef CONFIG_ARCH_OMAP15XX @@ -76,8 +72,6 @@ static void __init omap_generic_init(void) } #endif - omap_board_config = generic_config; - omap_board_config_size = ARRAY_SIZE(generic_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); } diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index b3f6e943e661..a5ac352d68d3 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -41,8 +41,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <plat/omap7xx.h> -#include <plat/board.h> +#include <mach/omap7xx.h> #include <plat/keypad.h> #include <plat/mmc.h> diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 2c0ca8fc3380..ec01f03d0446 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -26,7 +26,6 @@ #include <asm/mach/map.h> #include <plat/mux.h> -#include <plat/board.h> #include <plat/keypad.h> #include <plat/lcd_mipid.h> #include <plat/mmc.h> diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 8784705edb60..3b2d9071022a 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -39,6 +39,8 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/i2c/tps65010.h> +#include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/omap1_bl.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 26bcb9defcdc..49f8d745ea1f 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -28,6 +28,7 @@ #include <linux/interrupt.h> #include <linux/apm-emulation.h> #include <linux/omapfb.h> +#include <linux/platform_data/omap1_bl.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -37,7 +38,6 @@ #include <plat/mux.h> #include <plat/tc.h> #include <plat/dma.h> -#include <plat/board.h> #include <plat/irda.h> #include <plat/keypad.h> diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 4d099446dfa8..01523cd78e58 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -27,6 +27,7 @@ #include <linux/omapfb.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/platform_data/omap1_bl.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -37,7 +38,6 @@ #include <plat/mux.h> #include <plat/dma.h> #include <plat/tc.h> -#include <plat/board.h> #include <plat/irda.h> #include <plat/keypad.h> diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 355980321c2d..a7abce69043a 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -30,6 +30,7 @@ #include <linux/omapfb.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/platform_data/omap1_bl.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,7 +40,6 @@ #include <plat/mux.h> #include <plat/dma.h> #include <plat/tc.h> -#include <plat/board.h> #include <plat/irda.h> #include <plat/keypad.h> diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 703d55ecffe2..277e0bc60a43 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -32,7 +32,6 @@ #include <plat/fpga.h> #include <plat/flash.h> #include <plat/keypad.h> -#include <plat/board.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 8c665bd16ac2..2e1fff26a2f3 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -38,7 +38,6 @@ #include <plat/dma.h> #include <plat/irda.h> #include <plat/tc.h> -#include <plat/board.h> #include <plat/keypad.h> #include <plat/board-sx1.h> diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 3497769eb353..1668af3017de 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -35,7 +35,6 @@ #include <plat/flash.h> #include <plat/mux.h> #include <plat/tc.h> -#include <plat/board.h> #include <mach/hardware.h> #include <mach/usb.h> @@ -155,9 +154,6 @@ static struct omap_usb_config voiceblue_usb_config __initdata = { .pins[2] = 6, }; -static struct omap_board_config_kernel voiceblue_config[] = { -}; - #define MACHINE_PANICED 1 #define MACHINE_REBOOTING 2 #define MACHINE_REBOOT 4 @@ -275,8 +271,6 @@ static void __init voiceblue_init(void) voiceblue_smc91x_resources[1].start = gpio_to_irq(8); voiceblue_smc91x_resources[1].end = gpio_to_irq(8); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); - omap_board_config = voiceblue_config; - omap_board_config_size = ARRAY_SIZE(voiceblue_config); omap_serial_init(); omap1_usb_init(&voiceblue_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index c007d80dfb62..6a32b9b0dc30 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -25,7 +25,6 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/clkdev_omap.h> -#include <plat/board.h> #include <plat/sram.h> /* for omap_sram_reprogram_clock() */ #include <mach/hardware.h> @@ -788,7 +787,6 @@ u32 cpu_mask; int __init omap1_clk_init(void) { struct omap_clk *c; - const struct omap_clock_config *info; int crystal_type = 0; /* Default 12 MHz */ u32 reg; @@ -837,12 +835,6 @@ int __init omap1_clk_init(void) ck_dpll1_p = clk_get(NULL, "ck_dpll1"); ck_ref_p = clk_get(NULL, "ck_ref"); - info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); - if (info != NULL) { - if (!cpu_is_omap15xx()) - crystal_type = info->system_clock_type; - } - if (cpu_is_omap7xx()) ck_ref.rate = 13000000; if (cpu_is_omap16xx() && crystal_type == 2) diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index fa1fa4deb6aa..05fdbd992c77 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -20,12 +20,11 @@ #include <asm/mach/map.h> #include <plat/tc.h> -#include <plat/board.h> #include <plat/mux.h> #include <plat/dma.h> #include <plat/mmc.h> -#include <plat/omap7xx.h> +#include <mach/omap7xx.h> #include <mach/camera.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 3ef7d52316b4..b0b0f0f27450 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -27,7 +27,8 @@ #include <plat/dma.h> #include <plat/tc.h> -#include <plat/irqs.h> + +#include <mach/irqs.h> #define OMAP1_DMA_BASE (0xfffed800) #define OMAP1_LOGICAL_DMA_CH_COUNT 17 diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index ebef15e5e7b7..98e6f39224a4 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -17,6 +17,7 @@ */ #include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE #define OMAP1510_GPIO_BASE 0xFFFCE000 diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 2a48cd2e1754..33f419236b17 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -17,6 +17,7 @@ */ #include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> #define OMAP1610_GPIO1_BASE 0xfffbe400 #define OMAP1610_GPIO2_BASE 0xfffbec00 diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index acf12b73eace..958ce9acee95 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -17,6 +17,7 @@ */ #include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> #define OMAP7XX_GPIO1_BASE 0xfffbc000 #define OMAP7XX_GPIO2_BASE 0xfffbc800 diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h index 23eed0035ed8..adb5e7649659 100644 --- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h +++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h @@ -14,8 +14,6 @@ #ifndef __AMS_DELTA_FIQ_H #define __AMS_DELTA_FIQ_H -#include <plat/irqs.h> - /* * Interrupt number used for passing control from FIQ to IRQ. * IRQ12, described as reserved, has been selected. diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h index e737706a8fe1..ebf86c0f4f46 100644 --- a/arch/arm/mach-omap1/include/mach/gpio.h +++ b/arch/arm/mach-omap1/include/mach/gpio.h @@ -1,5 +1,3 @@ /* * arch/arm/mach-omap1/include/mach/gpio.h */ - -#include <plat/gpio.h> diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h index 01e35fa106b8..84248d250adb 100644 --- a/arch/arm/mach-omap1/include/mach/hardware.h +++ b/arch/arm/mach-omap1/include/mach/hardware.h @@ -1,11 +1,46 @@ /* * arch/arm/mach-omap1/include/mach/hardware.h + * + * Hardware definitions for TI OMAP processors and boards + * + * NOTE: Please put device driver specific defines into a separate header + * file for each driver. + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> + * + * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com> + * and Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H +#ifndef __ASM_ARCH_OMAP_HARDWARE_H +#define __ASM_ARCH_OMAP_HARDWARE_H +#include <asm/sizes.h> #ifndef __ASSEMBLER__ +#include <asm/types.h> +#include <plat/cpu.h> + /* * NOTE: Please use ioremap + __raw_read/write where possible instead of these */ @@ -35,7 +70,249 @@ static inline u32 omap_cs3_phys(void) ? 0 : OMAP_CS3_PHYS; } +#endif /* ifndef __ASSEMBLER__ */ + +#include <plat/serial.h> + +/* + * --------------------------------------------------------------------------- + * Common definitions for all OMAP processors + * NOTE: Put all processor or board specific parts to the special header + * files. + * --------------------------------------------------------------------------- + */ + +/* + * ---------------------------------------------------------------------------- + * Timers + * ---------------------------------------------------------------------------- + */ +#define OMAP_MPU_TIMER1_BASE (0xfffec500) +#define OMAP_MPU_TIMER2_BASE (0xfffec600) +#define OMAP_MPU_TIMER3_BASE (0xfffec700) +#define MPU_TIMER_FREE (1 << 6) +#define MPU_TIMER_CLOCK_ENABLE (1 << 5) +#define MPU_TIMER_AR (1 << 1) +#define MPU_TIMER_ST (1 << 0) + +/* + * ---------------------------------------------------------------------------- + * Clocks + * ---------------------------------------------------------------------------- + */ +#define CLKGEN_REG_BASE (0xfffece00) +#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) +#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) +#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) +#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) +#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) +#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) +#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) +#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) + +#define CK_RATEF 1 +#define CK_IDLEF 2 +#define CK_ENABLEF 4 +#define CK_SELECTF 8 +#define SETARM_IDLE_SHIFT + +/* DPLL control registers */ +#define DPLL_CTL (0xfffecf00) + +/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ +#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) +#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) +#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) +#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) +#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) + +/* + * --------------------------------------------------------------------------- + * UPLD + * --------------------------------------------------------------------------- + */ +#define ULPD_REG_BASE (0xfffe0800) +#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) +#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) +#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) +# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ +# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ +#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) +# define SOFT_UDC_REQ (1 << 4) +# define SOFT_USB_CLK_REQ (1 << 3) +# define SOFT_DPLL_REQ (1 << 0) +#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) +#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) +#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) +#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) +#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) +# define DIS_MMC2_DPLL_REQ (1 << 11) +# define DIS_MMC1_DPLL_REQ (1 << 10) +# define DIS_UART3_DPLL_REQ (1 << 9) +# define DIS_UART2_DPLL_REQ (1 << 8) +# define DIS_UART1_DPLL_REQ (1 << 7) +# define DIS_USB_HOST_DPLL_REQ (1 << 6) +#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) +#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) + +/* + * --------------------------------------------------------------------------- + * Watchdog timer + * --------------------------------------------------------------------------- + */ + +/* Watchdog timer within the OMAP3.2 gigacell */ +#define OMAP_MPU_WATCHDOG_BASE (0xfffec800) +#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) +#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) +#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) +#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) + +/* + * --------------------------------------------------------------------------- + * Interrupts + * --------------------------------------------------------------------------- + */ +#ifdef CONFIG_ARCH_OMAP1 + +/* + * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c + * or something similar.. -- PFM. + */ + +#define OMAP_IH1_BASE 0xfffecb00 +#define OMAP_IH2_BASE 0xfffe0000 + +#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) +#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) +#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) +#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) +#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) +#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) +#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) + +#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) +#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) +#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) +#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) +#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) +#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) +#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) + +#define IRQ_ITR_REG_OFFSET 0x00 +#define IRQ_MIR_REG_OFFSET 0x04 +#define IRQ_SIR_IRQ_REG_OFFSET 0x10 +#define IRQ_SIR_FIQ_REG_OFFSET 0x14 +#define IRQ_CONTROL_REG_OFFSET 0x18 +#define IRQ_ISR_REG_OFFSET 0x9c +#define IRQ_ILR0_REG_OFFSET 0x1c +#define IRQ_GMR_REG_OFFSET 0xa0 + #endif -#endif -#include <plat/hardware.h> +/* + * ---------------------------------------------------------------------------- + * System control registers + * ---------------------------------------------------------------------------- + */ +#define MOD_CONF_CTRL_0 0xfffe1080 +#define MOD_CONF_CTRL_1 0xfffe1110 + +/* + * ---------------------------------------------------------------------------- + * Pin multiplexing registers + * ---------------------------------------------------------------------------- + */ +#define FUNC_MUX_CTRL_0 0xfffe1000 +#define FUNC_MUX_CTRL_1 0xfffe1004 +#define FUNC_MUX_CTRL_2 0xfffe1008 +#define COMP_MODE_CTRL_0 0xfffe100c +#define FUNC_MUX_CTRL_3 0xfffe1010 +#define FUNC_MUX_CTRL_4 0xfffe1014 +#define FUNC_MUX_CTRL_5 0xfffe1018 +#define FUNC_MUX_CTRL_6 0xfffe101C +#define FUNC_MUX_CTRL_7 0xfffe1020 +#define FUNC_MUX_CTRL_8 0xfffe1024 +#define FUNC_MUX_CTRL_9 0xfffe1028 +#define FUNC_MUX_CTRL_A 0xfffe102C +#define FUNC_MUX_CTRL_B 0xfffe1030 +#define FUNC_MUX_CTRL_C 0xfffe1034 +#define FUNC_MUX_CTRL_D 0xfffe1038 +#define PULL_DWN_CTRL_0 0xfffe1040 +#define PULL_DWN_CTRL_1 0xfffe1044 +#define PULL_DWN_CTRL_2 0xfffe1048 +#define PULL_DWN_CTRL_3 0xfffe104c +#define PULL_DWN_CTRL_4 0xfffe10ac + +/* OMAP-1610 specific multiplexing registers */ +#define FUNC_MUX_CTRL_E 0xfffe1090 +#define FUNC_MUX_CTRL_F 0xfffe1094 +#define FUNC_MUX_CTRL_10 0xfffe1098 +#define FUNC_MUX_CTRL_11 0xfffe109c +#define FUNC_MUX_CTRL_12 0xfffe10a0 +#define PU_PD_SEL_0 0xfffe10b4 +#define PU_PD_SEL_1 0xfffe10b8 +#define PU_PD_SEL_2 0xfffe10bc +#define PU_PD_SEL_3 0xfffe10c0 +#define PU_PD_SEL_4 0xfffe10c4 + +/* Timer32K for 1610 and 1710*/ +#define OMAP_TIMER32K_BASE 0xFFFBC400 + +/* + * --------------------------------------------------------------------------- + * TIPB bus interface + * --------------------------------------------------------------------------- + */ +#define TIPB_PUBLIC_CNTL_BASE 0xfffed300 +#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) +#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 +#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) + +/* + * ---------------------------------------------------------------------------- + * MPUI interface + * ---------------------------------------------------------------------------- + */ +#define MPUI_BASE (0xfffec900) +#define MPUI_CTRL (MPUI_BASE + 0x0) +#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) +#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) +#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) +#define MPUI_STATUS_REG (MPUI_BASE + 0x10) +#define MPUI_DSP_STATUS (MPUI_BASE + 0x14) +#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) +#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) + +/* + * ---------------------------------------------------------------------------- + * LED Pulse Generator + * ---------------------------------------------------------------------------- + */ +#define OMAP_LPG1_BASE 0xfffbd000 +#define OMAP_LPG2_BASE 0xfffbd800 +#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) +#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) +#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) +#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) + +/* + * ---------------------------------------------------------------------------- + * Pulse-Width Light + * ---------------------------------------------------------------------------- + */ +#define OMAP_PWL_BASE 0xfffb5800 +#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) +#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) + +/* + * --------------------------------------------------------------------------- + * Processor specific defines + * --------------------------------------------------------------------------- + */ + +#include "omap7xx.h" +#include "omap1510.h" +#include "omap16xx.h" + +#endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/include/mach/irqs.h index 9292fdc1cb0b..729992d7d26a 100644 --- a/arch/arm/mach-omap1/include/mach/irqs.h +++ b/arch/arm/mach-omap1/include/mach/irqs.h @@ -1,5 +1,268 @@ /* - * arch/arm/mach-omap1/include/mach/irqs.h + * arch/arm/plat-omap/include/mach/irqs.h + * + * Copyright (C) Greg Lonnon 2001 + * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com> + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 + * are different. */ -#include <plat/irqs.h> +#ifndef __ASM_ARCH_OMAP15XX_IRQS_H +#define __ASM_ARCH_OMAP15XX_IRQS_H + +/* + * IRQ numbers for interrupt handler 1 + * + * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below + * + */ +#define INT_CAMERA 1 +#define INT_FIQ 3 +#define INT_RTDX 6 +#define INT_DSP_MMU_ABORT 7 +#define INT_HOST 8 +#define INT_ABORT 9 +#define INT_BRIDGE_PRIV 13 +#define INT_GPIO_BANK1 14 +#define INT_UART3 15 +#define INT_TIMER3 16 +#define INT_DMA_CH0_6 19 +#define INT_DMA_CH1_7 20 +#define INT_DMA_CH2_8 21 +#define INT_DMA_CH3 22 +#define INT_DMA_CH4 23 +#define INT_DMA_CH5 24 +#define INT_TIMER1 26 +#define INT_WD_TIMER 27 +#define INT_BRIDGE_PUB 28 +#define INT_TIMER2 30 +#define INT_LCD_CTRL 31 + +/* + * OMAP-1510 specific IRQ numbers for interrupt handler 1 + */ +#define INT_1510_IH2_IRQ 0 +#define INT_1510_RES2 2 +#define INT_1510_SPI_TX 4 +#define INT_1510_SPI_RX 5 +#define INT_1510_DSP_MAILBOX1 10 +#define INT_1510_DSP_MAILBOX2 11 +#define INT_1510_RES12 12 +#define INT_1510_LB_MMU 17 +#define INT_1510_RES18 18 +#define INT_1510_LOCAL_BUS 29 + +/* + * OMAP-1610 specific IRQ numbers for interrupt handler 1 + */ +#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ +#define INT_1610_IH2_FIQ 2 +#define INT_1610_McBSP2_TX 4 +#define INT_1610_McBSP2_RX 5 +#define INT_1610_DSP_MAILBOX1 10 +#define INT_1610_DSP_MAILBOX2 11 +#define INT_1610_LCD_LINE 12 +#define INT_1610_GPTIMER1 17 +#define INT_1610_GPTIMER2 18 +#define INT_1610_SSR_FIFO_0 29 + +/* + * OMAP-7xx specific IRQ numbers for interrupt handler 1 + */ +#define INT_7XX_IH2_FIQ 0 +#define INT_7XX_IH2_IRQ 1 +#define INT_7XX_USB_NON_ISO 2 +#define INT_7XX_USB_ISO 3 +#define INT_7XX_ICR 4 +#define INT_7XX_EAC 5 +#define INT_7XX_GPIO_BANK1 6 +#define INT_7XX_GPIO_BANK2 7 +#define INT_7XX_GPIO_BANK3 8 +#define INT_7XX_McBSP2TX 10 +#define INT_7XX_McBSP2RX 11 +#define INT_7XX_McBSP2RX_OVF 12 +#define INT_7XX_LCD_LINE 14 +#define INT_7XX_GSM_PROTECT 15 +#define INT_7XX_TIMER3 16 +#define INT_7XX_GPIO_BANK5 17 +#define INT_7XX_GPIO_BANK6 18 +#define INT_7XX_SPGIO_WR 29 + +/* + * IRQ numbers for interrupt handler 2 + * + * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below + */ +#define IH2_BASE 32 + +#define INT_KEYBOARD (1 + IH2_BASE) +#define INT_uWireTX (2 + IH2_BASE) +#define INT_uWireRX (3 + IH2_BASE) +#define INT_I2C (4 + IH2_BASE) +#define INT_MPUIO (5 + IH2_BASE) +#define INT_USB_HHC_1 (6 + IH2_BASE) +#define INT_McBSP3TX (10 + IH2_BASE) +#define INT_McBSP3RX (11 + IH2_BASE) +#define INT_McBSP1TX (12 + IH2_BASE) +#define INT_McBSP1RX (13 + IH2_BASE) +#define INT_UART1 (14 + IH2_BASE) +#define INT_UART2 (15 + IH2_BASE) +#define INT_BT_MCSI1TX (16 + IH2_BASE) +#define INT_BT_MCSI1RX (17 + IH2_BASE) +#define INT_SOSSI_MATCH (19 + IH2_BASE) +#define INT_USB_W2FC (20 + IH2_BASE) +#define INT_1WIRE (21 + IH2_BASE) +#define INT_OS_TIMER (22 + IH2_BASE) +#define INT_MMC (23 + IH2_BASE) +#define INT_GAUGE_32K (24 + IH2_BASE) +#define INT_RTC_TIMER (25 + IH2_BASE) +#define INT_RTC_ALARM (26 + IH2_BASE) +#define INT_MEM_STICK (27 + IH2_BASE) + +/* + * OMAP-1510 specific IRQ numbers for interrupt handler 2 + */ +#define INT_1510_DSP_MMU (28 + IH2_BASE) +#define INT_1510_COM_SPI_RO (31 + IH2_BASE) + +/* + * OMAP-1610 specific IRQ numbers for interrupt handler 2 + */ +#define INT_1610_FAC (0 + IH2_BASE) +#define INT_1610_USB_HHC_2 (7 + IH2_BASE) +#define INT_1610_USB_OTG (8 + IH2_BASE) +#define INT_1610_SoSSI (9 + IH2_BASE) +#define INT_1610_SoSSI_MATCH (19 + IH2_BASE) +#define INT_1610_DSP_MMU (28 + IH2_BASE) +#define INT_1610_McBSP2RX_OF (31 + IH2_BASE) +#define INT_1610_STI (32 + IH2_BASE) +#define INT_1610_STI_WAKEUP (33 + IH2_BASE) +#define INT_1610_GPTIMER3 (34 + IH2_BASE) +#define INT_1610_GPTIMER4 (35 + IH2_BASE) +#define INT_1610_GPTIMER5 (36 + IH2_BASE) +#define INT_1610_GPTIMER6 (37 + IH2_BASE) +#define INT_1610_GPTIMER7 (38 + IH2_BASE) +#define INT_1610_GPTIMER8 (39 + IH2_BASE) +#define INT_1610_GPIO_BANK2 (40 + IH2_BASE) +#define INT_1610_GPIO_BANK3 (41 + IH2_BASE) +#define INT_1610_MMC2 (42 + IH2_BASE) +#define INT_1610_CF (43 + IH2_BASE) +#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_1610_GPIO_BANK4 (48 + IH2_BASE) +#define INT_1610_SPI (49 + IH2_BASE) +#define INT_1610_DMA_CH6 (53 + IH2_BASE) +#define INT_1610_DMA_CH7 (54 + IH2_BASE) +#define INT_1610_DMA_CH8 (55 + IH2_BASE) +#define INT_1610_DMA_CH9 (56 + IH2_BASE) +#define INT_1610_DMA_CH10 (57 + IH2_BASE) +#define INT_1610_DMA_CH11 (58 + IH2_BASE) +#define INT_1610_DMA_CH12 (59 + IH2_BASE) +#define INT_1610_DMA_CH13 (60 + IH2_BASE) +#define INT_1610_DMA_CH14 (61 + IH2_BASE) +#define INT_1610_DMA_CH15 (62 + IH2_BASE) +#define INT_1610_NAND (63 + IH2_BASE) +#define INT_1610_SHA1MD5 (91 + IH2_BASE) + +/* + * OMAP-7xx specific IRQ numbers for interrupt handler 2 + */ +#define INT_7XX_HW_ERRORS (0 + IH2_BASE) +#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE) +#define INT_7XX_CFCD (2 + IH2_BASE) +#define INT_7XX_CFIREQ (3 + IH2_BASE) +#define INT_7XX_I2C (4 + IH2_BASE) +#define INT_7XX_PCC (5 + IH2_BASE) +#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE) +#define INT_7XX_SPI_100K_1 (7 + IH2_BASE) +#define INT_7XX_SYREN_SPI (8 + IH2_BASE) +#define INT_7XX_VLYNQ (9 + IH2_BASE) +#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE) +#define INT_7XX_McBSP1TX (11 + IH2_BASE) +#define INT_7XX_McBSP1RX (12 + IH2_BASE) +#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE) +#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE) +#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE) +#define INT_7XX_MCSI (16 + IH2_BASE) +#define INT_7XX_uWireTX (17 + IH2_BASE) +#define INT_7XX_uWireRX (18 + IH2_BASE) +#define INT_7XX_SMC_CD (19 + IH2_BASE) +#define INT_7XX_SMC_IREQ (20 + IH2_BASE) +#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE) +#define INT_7XX_TIMER32K (22 + IH2_BASE) +#define INT_7XX_MMC_SDIO (23 + IH2_BASE) +#define INT_7XX_UPLD (24 + IH2_BASE) +#define INT_7XX_USB_HHC_1 (27 + IH2_BASE) +#define INT_7XX_USB_HHC_2 (28 + IH2_BASE) +#define INT_7XX_USB_GENI (29 + IH2_BASE) +#define INT_7XX_USB_OTG (30 + IH2_BASE) +#define INT_7XX_CAMERA_IF (31 + IH2_BASE) +#define INT_7XX_RNG (32 + IH2_BASE) +#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE) +#define INT_7XX_DBB_RF_EN (34 + IH2_BASE) +#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE) +#define INT_7XX_SHA1_MD5 (36 + IH2_BASE) +#define INT_7XX_SPI_100K_2 (37 + IH2_BASE) +#define INT_7XX_RNG_IDLE (38 + IH2_BASE) +#define INT_7XX_MPUIO (39 + IH2_BASE) +#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) +#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE) +#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE) +#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE) +#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_7XX_DMA_CH6 (53 + IH2_BASE) +#define INT_7XX_DMA_CH7 (54 + IH2_BASE) +#define INT_7XX_DMA_CH8 (55 + IH2_BASE) +#define INT_7XX_DMA_CH9 (56 + IH2_BASE) +#define INT_7XX_DMA_CH10 (57 + IH2_BASE) +#define INT_7XX_DMA_CH11 (58 + IH2_BASE) +#define INT_7XX_DMA_CH12 (59 + IH2_BASE) +#define INT_7XX_DMA_CH13 (60 + IH2_BASE) +#define INT_7XX_DMA_CH14 (61 + IH2_BASE) +#define INT_7XX_DMA_CH15 (62 + IH2_BASE) +#define INT_7XX_NAND (63 + IH2_BASE) + +/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and + * 16 MPUIO lines */ +#define OMAP_MAX_GPIO_LINES 192 +#define IH_GPIO_BASE (128 + IH2_BASE) +#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) +#define OMAP_IRQ_END (IH_MPUIO_BASE + 16) + +/* External FPGA handles interrupts on Innovator boards */ +#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END) +#ifdef CONFIG_MACH_OMAP_INNOVATOR +#define OMAP_FPGA_NR_IRQS 24 +#else +#define OMAP_FPGA_NR_IRQS 0 +#endif +#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) + +#define NR_IRQS OMAP_FPGA_IRQ_END + +#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) + +#include <mach/hardware.h> + +#ifdef CONFIG_FIQ +#define FIQ_START 1024 +#endif + +#endif diff --git a/arch/arm/plat-omap/include/plat/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h index d24004668138..8fe05d6137c0 100644 --- a/arch/arm/plat-omap/include/plat/omap1510.h +++ b/arch/arm/mach-omap1/include/mach/omap1510.h @@ -1,5 +1,4 @@ -/* arch/arm/plat-omap/include/mach/omap1510.h - * +/* * Hardware definitions for TI OMAP1510 processor. * * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> diff --git a/arch/arm/plat-omap/include/plat/omap16xx.h b/arch/arm/mach-omap1/include/mach/omap16xx.h index e69e1d857b45..cd1c724869c7 100644 --- a/arch/arm/plat-omap/include/plat/omap16xx.h +++ b/arch/arm/mach-omap1/include/mach/omap16xx.h @@ -1,5 +1,4 @@ -/* arch/arm/plat-omap/include/mach/omap16xx.h - * +/* * Hardware definitions for TI OMAP1610/5912/1710 processors. * * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/mach-omap1/include/mach/omap7xx.h index 48e4757e1e30..63da994bc609 100644 --- a/arch/arm/plat-omap/include/plat/omap7xx.h +++ b/arch/arm/mach-omap1/include/mach/omap7xx.h @@ -1,5 +1,4 @@ -/* arch/arm/plat-omap/include/mach/omap7xx.h - * +/* * Hardware definitions for TI OMAP7XX processor. * * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index f6b14a14a957..7f4bba9fa02e 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -14,6 +14,7 @@ #include <linux/kernel_stat.h> #include <linux/sched.h> #include <linux/io.h> +#include <linux/platform_data/gpio-omap.h> #include <mach/hardware.h> #include <asm/leds.h> diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c index ae6dd93b8ddc..7b1a3833165d 100644 --- a/arch/arm/mach-omap1/leds.c +++ b/arch/arm/mach-omap1/leds.c @@ -6,6 +6,7 @@ #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/platform_data/gpio-omap.h> #include <asm/leds.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 6809c9e56c93..0d1709b1a6fe 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -22,7 +22,6 @@ #include <asm/mach-types.h> -#include <plat/board.h> #include <plat/mux.h> #include <plat/fpga.h> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index fcd4e85c4ddc..c1309495eeb6 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -18,6 +18,7 @@ config ARCH_OMAP2PLUS_TYPICAL select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 select HIGHMEM + select PINCTRL help Compile a kernel suitable for booting most boards diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot index b03e562acc60..be0fe9226d67 100644 --- a/arch/arm/mach-omap2/Makefile.boot +++ b/arch/arm/mach-omap2/Makefile.boot @@ -1,3 +1,9 @@ zreladdr-y += 0x80008000 params_phys-y := 0x80000100 initrd_phys-y := 0x80800000 + +dtb-$(CONFIG_SOC_OMAP2420) += omap2420-h4.dtb +dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle-xm.dtb omap3-evm.dtb omap3-tobi.dtb +dtb-$(CONFIG_ARCH_OMAP4) += omap4-panda.dtb omap4-pandaES.dtb +dtb-$(CONFIG_ARCH_OMAP4) += omap4-var_som.dtb omap4-sdp.dtb +dtb-$(CONFIG_SOC_OMAP5) += omap5-evm.dtb diff --git a/arch/arm/plat-omap/include/plat/am33xx.h b/arch/arm/mach-omap2/am33xx.h index 06c19bb7bca6..06c19bb7bca6 100644 --- a/arch/arm/plat-omap/include/plat/am33xx.h +++ b/arch/arm/mach-omap2/am33xx.h diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 9511584fdc4f..0900eac57d56 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -33,7 +33,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> #include <plat/usb.h> @@ -212,9 +211,6 @@ static struct regulator_init_data sdp2430_vmmc1 = { }; static struct twl4030_gpio_platform_data sdp2430_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, }; static struct twl4030_platform_data sdp2430_twldata = { @@ -235,7 +231,7 @@ static int __init omap2430_i2c_init(void) sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78); omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, ARRAY_SIZE(sdp2430_i2c1_boardinfo)); - omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ, + omap_pmic_init(2, 100, "twl4030", 7 + OMAP_INTC_START, &sdp2430_twldata); return 0; } diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index a98c688058a9..5453173ff57b 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -25,13 +25,11 @@ #include <linux/gpio.h> #include <linux/mmc/host.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <plat/mcspi.h> -#include <plat/board.h> #include <plat/usb.h> #include "common.h" #include <plat/dma.h> @@ -191,9 +189,6 @@ static struct omap_dss_board_info sdp3430_dss_data = { .default_device = &sdp3430_lcd_device, }; -static struct omap_board_config_kernel sdp3430_config[] __initdata = { -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -233,9 +228,6 @@ static int sdp3430_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data sdp3430_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13) | BIT(16) | BIT(17), .setup = sdp3430_twl_gpio_setup, @@ -576,8 +568,6 @@ static void __init omap_3430sdp_init(void) int gpio_pendown; omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_board_config = sdp3430_config; - omap_board_config_size = ARRAY_SIZE(sdp3430_config); omap_hsmmc_init(mmc); omap3430_i2c_init(); omap_display_init(&sdp3430_dss_data); diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 2dc9ba523c7a..8518b1345988 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -17,7 +17,6 @@ #include <asm/mach/arch.h> #include "common.h" -#include <plat/board.h> #include <plat/gpmc-smc91x.h> #include <plat/usb.h> @@ -67,9 +66,6 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .reset_gpio_port[2] = -EINVAL }; -static struct omap_board_config_kernel sdp_config[] __initdata = { -}; - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -197,8 +193,6 @@ static struct flash_partitions sdp_flash_partitions[] = { static void __init omap_sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); - omap_board_config = sdp_config; - omap_board_config_size = ARRAY_SIZE(sdp_config); zoom_peripherals_init(); omap_sdrc_init(h8mbx00u0mer0em_sdrc_params, h8mbx00u0mer0em_sdrc_params); diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index ad8a7d94afcd..db43e22526c0 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -28,13 +28,11 @@ #include <linux/leds_pwm.h> #include <linux/platform_data/omap4-keypad.h> -#include <mach/hardware.h> #include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <plat/usb.h> #include <plat/mmc.h> @@ -45,6 +43,7 @@ #include <linux/wl12xx.h> #include <linux/platform_data/omap-abe-twl6040.h> +#include "soc.h" #include "mux.h" #include "hsmmc.h" #include "control.h" @@ -544,7 +543,6 @@ static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .vibra = &twl6040_vibra, .audpwron_gpio = 127, - .irq_base = TWL6040_CODEC_IRQ_BASE, }; static struct twl4030_platform_data sdp4430_twldata = { @@ -581,7 +579,7 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_V1V8 | TWL_COMMON_REGULATOR_V2V1); omap4_pmic_init("twl6030", &sdp4430_twldata, - &twl6040_data, OMAP44XX_IRQ_SYS_2N); + &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 92432c28673d..318feadb1d6e 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -21,12 +21,10 @@ #include <linux/init.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <plat/usb.h> @@ -37,11 +35,6 @@ #define GPIO_USB_POWER 35 #define GPIO_USB_NRESET 38 - -/* Board initialization */ -static struct omap_board_config_kernel am3517_crane_config[] __initdata = { -}; - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -67,9 +60,6 @@ static void __init am3517_crane_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); - omap_board_config = am3517_crane_config; - omap_board_config_size = ARRAY_SIZE(am3517_crane_config); - /* Configure GPIO for EHCI port */ if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) { pr_err("Can not configure mux for GPIO_USB_NRESET %d\n", diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 18f601096ce1..403d048a00ee 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -25,14 +25,13 @@ #include <linux/can/platform/ti_hecc.h> #include <linux/davinci_emac.h> #include <linux/mmc/host.h> +#include <linux/platform_data/gpio-omap.h> -#include <mach/hardware.h> #include <mach/am35xx.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <plat/usb.h> #include <video/omapdss.h> @@ -296,8 +295,7 @@ static struct resource am3517_hecc_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_35XX_HECC0_IRQ, - .end = INT_35XX_HECC0_IRQ, + .start = 24 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, }, }; @@ -324,9 +322,6 @@ static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata) platform_device_register(&am3517_hecc_device); } -static struct omap_board_config_kernel am3517_evm_config[] __initdata = { -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -346,8 +341,6 @@ static struct omap2_hsmmc_info mmc[] = { static void __init am3517_evm_init(void) { - omap_board_config = am3517_evm_config; - omap_board_config_size = ARRAY_SIZE(am3517_evm_config); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); am3517_evm_i2c_init(); diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index e5fa46bfde2f..3e2d76f05af4 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -29,13 +29,11 @@ #include <linux/smc91x.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <plat/led.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 97d719047af3..34cb90471d96 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -23,6 +23,7 @@ #include <linux/input/matrix_keypad.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> #include <linux/i2c/at24.h> #include <linux/i2c/twl.h> @@ -37,7 +38,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <plat/nand.h> #include <plat/gpmc.h> @@ -470,9 +470,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, } static struct twl4030_gpio_platform_data cm_t35_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .setup = cm_t35_twl_gpio_setup, }; @@ -714,13 +711,8 @@ static inline void cm_t35_init_mux(void) {} static inline void cm_t3730_init_mux(void) {} #endif -static struct omap_board_config_kernel cm_t35_config[] __initdata = { -}; - static void __init cm_t3x_common_init(void) { - omap_board_config = cm_t35_config; - omap_board_config_size = ARRAY_SIZE(cm_t35_config); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index a33ad4641d9a..27a5450751ed 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -38,7 +38,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <plat/usb.h> #include <plat/nand.h> @@ -90,8 +89,7 @@ static struct resource cm_t3517_hecc_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_35XX_HECC0_IRQ, - .end = INT_35XX_HECC0_IRQ, + .start = 24 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, }, }; @@ -249,9 +247,6 @@ static void __init cm_t3517_init_nand(void) static inline void cm_t3517_init_nand(void) {} #endif -static struct omap_board_config_kernel cm_t3517_config[] __initdata = { -}; - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { /* GPIO186 - Green LED */ @@ -285,8 +280,6 @@ static void __init cm_t3517_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); omap_sdrc_init(NULL, NULL); - omap_board_config = cm_t3517_config; - omap_board_config_size = ARRAY_SIZE(cm_t3517_config); cm_t3517_init_leds(); cm_t3517_init_nand(); cm_t3517_init_rtc(); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 6567c1cd5572..18b63ad56274 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -32,15 +32,12 @@ #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> - -#include <mach/hardware.h> #include <mach/id.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> #include <plat/nand.h> @@ -56,7 +53,6 @@ #include <linux/interrupt.h> #include "sdram-micron-mt46h32m32lf-6.h" - #include "mux.h" #include "hsmmc.h" #include "common-board-devices.h" @@ -236,9 +232,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data devkit8000_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13) | BIT(15) | BIT(16) | BIT(17), diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 53c39d239d6e..9017813f9abc 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -16,13 +16,14 @@ #include <linux/platform_device.h> #include <linux/mtd/physmap.h> #include <linux/io.h> -#include <plat/irqs.h> +#include <plat/cpu.h> #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/onenand.h> #include <plat/tc.h> +#include "common.h" #include "board-flash.h" #define REG_FPGA_REV 0x10 @@ -140,7 +141,6 @@ __init board_nand_init(struct mtd_partition *nand_parts, board_nand_data.devsize = nand_type; board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT; - board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs; gpmc_nand_init(&board_nand_data); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 6f93a20536ea..2ea7c577b295 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -16,11 +16,9 @@ #include <linux/of_platform.h> #include <linux/irqdomain.h> -#include <mach/hardware.h> #include <asm/hardware/gic.h> #include <asm/mach/arch.h> -#include <plat/board.h> #include "common.h" #include "common-board-devices.h" diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index ace20482e3e1..12569cb0eddd 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -27,20 +27,19 @@ #include <linux/io.h> #include <linux/input/matrix_keypad.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> -#include "common.h" #include <plat/menelaus.h> #include <plat/dma.h> #include <plat/gpmc.h> +#include <plat/debug-devices.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> +#include "common.h" #include "mux.h" #include "control.h" diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 28214483aaba..8408bb2748a6 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -29,10 +29,10 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> #include <plat/usb.h> + #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> #include <plat/onenand.h> @@ -425,9 +425,6 @@ static int igep_twl_gpio_setup(struct device *dev, }; static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .setup = igep_twl_gpio_setup, }; diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index ef9e82977499..3f3a552b1036 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -29,18 +29,14 @@ #include <linux/smsc911x.h> #include <linux/mmc/host.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <plat/mcspi.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> #include <mach/board-zoom.h> - -#include <asm/delay.h> #include <plat/usb.h> #include <plat/gpmc-smsc911x.h> @@ -275,9 +271,6 @@ static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) } static struct twl4030_gpio_platform_data ldp_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .setup = ldp_twl_gpio_setup, }; diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 677357ff61ac..d8deaea37dca 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -25,14 +25,11 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <plat/board.h> #include "common.h" #include <plat/menelaus.h> -#include <mach/irqs.h> #include <plat/mcspi.h> #include <plat/onenand.h> #include <plat/mmc.h> -#include <plat/serial.h> #include "mux.h" @@ -600,7 +597,7 @@ static struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = { static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = { { I2C_BOARD_INFO("menelaus", 0x72), - .irq = INT_24XX_SYS_NIRQ, + .irq = 7 + OMAP_INTC_START, .platform_data = &n8x0_menelaus_platform_data, }, }; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 6202fc76e490..801bcb4c5e22 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -33,13 +33,11 @@ #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <plat/board.h> #include "common.h" #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> @@ -297,9 +295,6 @@ static int beagle_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data beagle_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .pullups = BIT(1), .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 0d362e9f9cb9..b94873d0c6b6 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -40,12 +40,10 @@ #include <linux/mmc/host.h> #include <linux/export.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include <plat/usb.h> #include <plat/nand.h> #include "common.h" @@ -75,6 +73,18 @@ #define OMAP3EVM_GEN1_ETHR_GPIO_RST 64 #define OMAP3EVM_GEN2_ETHR_GPIO_RST 7 +/* + * OMAP35x EVM revision + * Run time detection of EVM revision is done by reading Ethernet + * PHY ID - + * GEN_1 = 0x01150000 + * GEN_2 = 0x92200000 + */ +enum { + OMAP3EVM_BOARD_GEN_1 = 0, /* EVM Rev between A - D */ + OMAP3EVM_BOARD_GEN_2, /* EVM Rev >= Rev E */ +}; + static u8 omap3_evm_version; u8 get_omap3_evm_rev(void) @@ -377,9 +387,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data omap3evm_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .setup = omap3evm_twl_gpio_setup, }; @@ -526,9 +533,6 @@ static int __init omap3_evm_i2c_init(void) return 0; } -static struct omap_board_config_kernel omap3_evm_config[] __initdata = { -}; - static struct usbhs_omap_board_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -688,9 +692,6 @@ static void __init omap3_evm_init(void) obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux; omap3_mux_init(obm, OMAP_PACKAGE_CBB); - omap_board_config = omap3_evm_config; - omap_board_config_size = ARRAY_SIZE(omap3_evm_config); - omap_mux_init_gpio(63, OMAP_PIN_INPUT); omap_hsmmc_init(mmc); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index fca93d1afd43..b5e56fa83c19 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -30,24 +30,21 @@ #include <linux/i2c/twl.h> #include <linux/mmc/host.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "mux.h" -#include "hsmmc.h" -#include "control.h" -#include "common-board-devices.h" - -#include <plat/mux.h> -#include <plat/board.h> -#include "common.h" #include <plat/gpmc-smsc911x.h> #include <plat/gpmc.h> #include <plat/sdrc.h> #include <plat/usb.h> +#include "common.h" +#include "mux.h" +#include "hsmmc.h" +#include "control.h" +#include "common-board-devices.h" + #define OMAP3LOGIC_SMSC911X_CS 1 #define OMAP3530_LV_SOM_MMC_GPIO_CD 110 @@ -78,9 +75,6 @@ static struct regulator_init_data omap3logic_vmmc1 = { }; static struct twl4030_gpio_platform_data omap3logic_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .pullups = BIT(1), .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 57aebee44fd0..e700a98feba6 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -40,9 +40,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" -#include <mach/hardware.h> #include <plat/mcspi.h> #include <plat/usb.h> #include <video/omapdss.h> @@ -321,9 +319,6 @@ static int omap3pandora_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .setup = omap3pandora_twl_gpio_setup, }; diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index b318f5602e36..b8756f0d2a08 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -28,14 +28,17 @@ #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> #include <linux/mmc/host.h> +#include <linux/input/matrix_keypad.h> +#include <linux/spi/spi.h> +#include <linux/interrupt.h> +#include <linux/smsc911x.h> +#include <linux/i2c/at24.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> #include <plat/nand.h> @@ -279,9 +282,6 @@ omap3stalker_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data omap3stalker_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .setup = omap3stalker_twl_gpio_setup, }; @@ -362,9 +362,6 @@ static int __init omap3_stalker_i2c_init(void) #define OMAP3_STALKER_TS_GPIO 175 -static struct omap_board_config_kernel omap3_stalker_config[] __initdata = { -}; - static struct platform_device *omap3_stalker_devices[] __initdata = { &keys_gpio, }; @@ -399,8 +396,6 @@ static void __init omap3_stalker_init(void) { regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); - omap_board_config = omap3_stalker_config; - omap_board_config_size = ARRAY_SIZE(omap3_stalker_config); omap_mux_init_gpio(23, OMAP_PIN_INPUT); omap_hsmmc_init(mmc); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 485d14d6a8cd..0e2f838e4009 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -37,14 +37,12 @@ #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> #include <asm/system_info.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> #include <plat/nand.h> @@ -139,9 +137,6 @@ static int touchbook_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data touchbook_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .pullups = BIT(1), .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 70f6d1d25463..45fe2d3f59b1 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -32,19 +32,18 @@ #include <linux/wl12xx.h> #include <linux/platform_data/omap-abe-twl6040.h> -#include <mach/hardware.h> #include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <video/omapdss.h> -#include <plat/board.h> #include "common.h" #include <plat/usb.h> #include <plat/mmc.h> #include <video/omap-panel-tfp410.h> +#include "soc.h" #include "hsmmc.h" #include "control.h" #include "mux.h" @@ -263,7 +262,6 @@ static struct twl6040_codec_data twl6040_codec = { static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .audpwron_gpio = 127, - .irq_base = TWL6040_CODEC_IRQ_BASE, }; /* Panda board uses the common PMIC configuration */ @@ -294,7 +292,7 @@ static int __init omap4_panda_i2c_init(void) TWL_COMMON_REGULATOR_V1V8 | TWL_COMMON_REGULATOR_V2V1); omap4_pmic_init("twl6030", &omap4_panda_twldata, - &twl6040_data, OMAP44XX_IRQ_SYS_2N); + &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 779734d8ba37..7a62d1322b7a 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -42,16 +42,13 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> #include <plat/gpmc.h> -#include <mach/hardware.h> #include <plat/nand.h> #include <plat/mcspi.h> -#include <plat/mux.h> #include <plat/usb.h> #include "mux.h" @@ -399,9 +396,6 @@ static int overo_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data overo_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .setup = overo_twl_gpio_setup, }; diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 0ad1bb3bdb98..00773a32524a 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -27,6 +27,7 @@ #include <plat/gpmc.h> #include "common.h" #include <plat/onenand.h> +#include <plat/serial.h> #include "mux.h" #include "hsmmc.h" @@ -72,9 +73,6 @@ static struct platform_device *rm680_peripherals_devices[] __initdata = { /* TWL */ static struct twl4030_gpio_platform_data rm680_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .pullups = BIT(0), .pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15), }; @@ -87,7 +85,7 @@ static struct twl4030_platform_data rm680_twl_data = { static void __init rm680_i2c_init(void) { omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0); - omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data); + omap_pmic_init(1, 2900, "twl5031", 7 + OMAP_INTC_START, &rm680_twl_data); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); } diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index df2534de3361..456049055daa 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -28,7 +28,6 @@ #include <asm/system_info.h> #include <plat/mcspi.h> -#include <plat/board.h> #include "common.h" #include <plat/dma.h> #include <plat/gpmc.h> @@ -774,9 +773,6 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) } static struct twl4030_gpio_platform_data rx51_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(8) | BIT(9) | BIT(10) | BIT(11) @@ -1051,7 +1047,7 @@ static int __init rx51_i2c_init(void) rx51_twldata.vdac->constraints.apply_uV = true; rx51_twldata.vdac->constraints.name = "VDAC"; - omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); + omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 345dd931f76f..93b466150002 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -18,13 +18,11 @@ #include <linux/gpio.h> #include <linux/leds.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <plat/mcspi.h> -#include <plat/board.h> #include "common.h" #include <plat/dma.h> #include <plat/gpmc.h> diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index d4c8392cadb6..c4f8833b4c3c 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -15,13 +15,10 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/irqs.h> -#include <plat/board.h> #include "common.h" #include <plat/usb.h> @@ -32,15 +29,10 @@ static struct omap_musb_board_data musb_board_data = { .power = 500, }; -static struct omap_board_config_kernel ti81xx_evm_config[] __initdata = { -}; - static void __init ti81xx_evm_init(void) { omap_serial_init(); omap_sdrc_init(NULL, NULL); - omap_board_config = ti81xx_evm_config; - omap_board_config_size = ARRAY_SIZE(ti81xx_evm_config); usb_musb_init(&musb_board_data); } diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index f64f44173061..5ec069e529e7 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -22,6 +22,9 @@ #include <mach/board-zoom.h> +#include "soc.h" +#include "common.h" + #define ZOOM_SMSC911X_CS 7 #define ZOOM_SMSC911X_GPIO 158 #define ZOOM_QUADUART_CS 3 diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 28187f134fff..ea79bc299baf 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -18,6 +18,8 @@ #include <video/omapdss.h> #include <mach/board-zoom.h> +#include "common.h" + #define LCD_PANEL_RESET_GPIO_PROD 96 #define LCD_PANEL_RESET_GPIO_PILOT 55 #define LCD_PANEL_QVGA_GPIO 56 diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index b797cb279618..6bcc107b9fc3 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -19,6 +19,7 @@ #include <linux/regulator/fixed.h> #include <linux/wl12xx.h> #include <linux/mmc/host.h> +#include <linux/platform_data/gpio-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -251,9 +252,6 @@ static void zoom2_set_hs_extmute(int mute) } static struct twl4030_gpio_platform_data zoom_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .setup = zoom_twl_gpio_setup, }; @@ -281,7 +279,7 @@ static int __init omap_i2c_init(void) codec_data->hs_extmute = 1; codec_data->set_hs_extmute = zoom2_set_hs_extmute; } - omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata); + omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); return 0; diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 4e7e56142e6f..4994438e1f46 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -22,7 +22,6 @@ #include <asm/mach/arch.h> #include "common.h" -#include <plat/board.h> #include <plat/usb.h> #include <mach/board-zoom.h> diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 3d9d746b221a..cabcfdba5246 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -33,11 +33,11 @@ #include <linux/cpufreq.h> #include <linux/slab.h> -#include <plat/cpu.h> #include <plat/clock.h> #include <plat/sram.h> #include <plat/sdrc.h> +#include "soc.h" #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index cd7fd0f91149..ae624c3b832a 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -22,8 +22,8 @@ #include <asm/div64.h> #include <plat/clock.h> -#include <plat/cpu.h> +#include "soc.h" #include "clock.h" #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index ea3f565ba1a4..1a1f97f3ca69 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -22,14 +22,16 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/bitops.h> -#include <trace/events/power.h> #include <asm/cpu.h> + #include <plat/clock.h> -#include "clockdomain.h" -#include <plat/cpu.h> #include <plat/prcm.h> +#include <trace/events/power.h> + +#include "soc.h" +#include "clockdomain.h" #include "clock.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 002745181ad6..12c178dbc9f5 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -18,9 +18,9 @@ #include <linux/clk.h> #include <linux/list.h> -#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "clock2xxx.h" diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c index dfda9a3f2cb2..a8e326177466 100644 --- a/arch/arm/mach-omap2/clock2430.c +++ b/arch/arm/mach-omap2/clock2430.c @@ -21,9 +21,9 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/hardware.h> #include <plat/clock.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "clock2xxx.h" diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index cacabb070e22..02fe1f28affc 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -17,9 +17,9 @@ #include <linux/clk.h> #include <linux/list.h> -#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "clock2xxx.h" diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c index 12500097378d..e92be1fc1a00 100644 --- a/arch/arm/mach-omap2/clock2xxx.c +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -22,9 +22,9 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/cpu.h> #include <plat/clock.h> +#include "soc.h" #include "clock.h" #include "clock2xxx.h" #include "cm.h" diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index 25bbcc7ca4dc..7aa5ecaee5a2 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -18,8 +18,8 @@ #include <linux/list.h> #include <linux/clk.h> #include <plat/clkdev_omap.h> -#include <plat/am33xx.h> +#include "am33xx.h" #include "iomap.h" #include "control.h" #include "clock.h" diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index 794d82702c85..fc2765bcdd40 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c @@ -21,9 +21,9 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/hardware.h> #include <plat/clock.h> +#include "soc.h" #include "clock.h" #include "clock3xxx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 83bed9ad3017..10a2398e1736 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -21,9 +21,9 @@ #include <linux/list.h> #include <linux/io.h> -#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "clock3xxx.h" diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index d7f55e43b761..500682c051c1 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -28,9 +28,9 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "clock44xx.h" diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c index 389f9f8b570c..a911e76b4ecf 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c @@ -18,8 +18,7 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/hardware.h> - +#include "soc.h" #include "iomap.h" #include "common.h" #include "cm.h" diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index c1875862679f..013fedc9e131 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -27,6 +27,7 @@ #include <plat/mcspi.h> #include <plat/nand.h> +#include "common.h" #include "common-board-devices.h" #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 069f9725b1c3..8e43c4d885d5 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -17,11 +17,10 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/hardware.h> -#include <plat/board.h> #include <plat/mux.h> #include <plat/clock.h> +#include "soc.h" #include "iomap.h" #include "common.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 1f65b1871c23..da0f5c187353 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -26,11 +26,18 @@ #define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H #ifndef __ASSEMBLER__ +#include <linux/irq.h> #include <linux/delay.h> #include <linux/i2c/twl.h> -#include <plat/common.h> + #include <asm/proc-fns.h> +#include <plat/cpu.h> +#include <plat/serial.h> +#include <plat/common.h> + +#define OMAP_INTC_START NR_IRQS + #ifdef CONFIG_SOC_OMAP2420 extern void omap242x_map_common_io(void); #else diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 3223b81e7532..d1ff8399a222 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -15,9 +15,9 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <plat/hardware.h> #include <plat/sdrc.h> +#include "soc.h" #include "iomap.h" #include "common.h" #include "cm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index b8cdc8531b60..c1a5cab0f236 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -21,7 +21,7 @@ #include <mach/ctrl_module_pad_core_44xx.h> #include <mach/ctrl_module_pad_wkup_44xx.h> -#include <plat/am33xx.h> +#include "am33xx.h" #ifndef __ASSEMBLY__ #define OMAP242X_CTRL_REGADDR(reg) \ diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index f2a49a48ef59..bc2756959be5 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -28,7 +28,6 @@ #include <linux/cpu_pm.h> #include <plat/prcm.h> -#include <plat/irqs.h> #include "powerdomain.h" #include "clockdomain.h" diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index c00c68961bb8..1efa984b1a47 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -19,19 +19,18 @@ #include <linux/of.h> #include <linux/platform_data/omap4-keypad.h> -#include <mach/hardware.h> -#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/map.h> #include <asm/pmu.h> #include "iomap.h" -#include <plat/board.h> #include <plat/dma.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> #include <plat/omap4-keypad.h> +#include "soc.h" +#include "common.h" #include "mux.h" #include "control.h" #include "devices.h" @@ -112,7 +111,7 @@ static struct resource omap2cam_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_24XX_CAM_IRQ, + .start = 24 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, } }; @@ -201,7 +200,7 @@ static struct resource omap3isp_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_34XX_CAM_IRQ, + .start = 24 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, } }; @@ -435,14 +434,12 @@ static inline void omap_init_mcspi(void) {} #endif static struct resource omap2_pmu_resource = { - .start = 3, - .end = 3, + .start = 3 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, }; static struct resource omap3_pmu_resource = { - .start = INT_34XX_BENCH_MPU_EMUL, - .end = INT_34XX_BENCH_MPU_EMUL, + .start = 3 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, }; @@ -475,7 +472,7 @@ static struct resource omap2_sham_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_24XX_SHA1MD5, + .start = 51 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, } }; @@ -493,7 +490,7 @@ static struct resource omap3_sham_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_34XX_SHA1MD52_IRQ, + .start = 49 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index b9c8d2f6a81f..d8318dc5ee91 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -28,9 +28,9 @@ #include <linux/bitops.h> #include <linux/clkdev.h> -#include <plat/cpu.h> #include <plat/clock.h> +#include "soc.h" #include "clock.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c index 9c6a296b3dc3..09d0ccccb861 100644 --- a/arch/arm/mach-omap2/dpll44xx.c +++ b/arch/arm/mach-omap2/dpll44xx.c @@ -15,9 +15,9 @@ #include <linux/io.h> #include <linux/bitops.h> -#include <plat/cpu.h> #include <plat/clock.h> +#include "soc.h" #include "clock.h" #include "clock44xx.h" #include "cm-regbits-44xx.h" diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c index e28e761b7ab9..b3566f68a559 100644 --- a/arch/arm/mach-omap2/emu.c +++ b/arch/arm/mach-omap2/emu.c @@ -21,8 +21,7 @@ #include <linux/clk.h> #include <linux/err.h> -#include <mach/hardware.h> - +#include "soc.h" #include "iomap.h" MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 9ad7d489b0de..7b52bdfc59c9 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -21,6 +21,7 @@ #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/of.h> +#include <linux/platform_data/gpio-omap.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 386dec8d2351..9e9f47ad6187 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -16,20 +16,28 @@ #include <asm/mach/flash.h> -#include <plat/cpu.h> #include <plat/nand.h> -#include <plat/board.h> #include <plat/gpmc.h> -static struct resource gpmc_nand_resource = { - .flags = IORESOURCE_MEM, +#include "soc.h" + +static struct resource gpmc_nand_resource[] = { + { + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ, + }, + { + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device gpmc_nand_device = { .name = "omap2-nand", .id = 0, - .num_resources = 1, - .resource = &gpmc_nand_resource, + .num_resources = ARRAY_SIZE(gpmc_nand_resource), + .resource = gpmc_nand_resource, }; static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data) @@ -75,6 +83,7 @@ static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0); gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND); + gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0); err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t); if (err) return err; @@ -90,12 +99,19 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) gpmc_nand_device.dev.platform_data = gpmc_nand_data; err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE, - &gpmc_nand_data->phys_base); + (unsigned long *)&gpmc_nand_resource[0].start); if (err < 0) { dev_err(dev, "Cannot request GPMC CS\n"); return err; } + gpmc_nand_resource[0].end = gpmc_nand_resource[0].start + + NAND_IO_SIZE - 1; + + gpmc_nand_resource[1].start = + gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE); + gpmc_nand_resource[2].start = + gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); /* Set timings in GPMC */ err = omap2_nand_gpmc_retime(gpmc_nand_data); if (err < 0) { @@ -108,6 +124,8 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1); } + gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs); + err = platform_device_register(&gpmc_nand_device); if (err < 0) { dev_err(dev, "Unable to register NAND device\n"); diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index a0fa9bb2bda5..b66fb8e5faaa 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -18,16 +18,24 @@ #include <asm/mach/flash.h> -#include <plat/cpu.h> #include <plat/onenand.h> -#include <plat/board.h> #include <plat/gpmc.h> +#include "soc.h" + +#define ONENAND_IO_SIZE SZ_128K + static struct omap_onenand_platform_data *gpmc_onenand_data; +static struct resource gpmc_onenand_resource = { + .flags = IORESOURCE_MEM, +}; + static struct platform_device gpmc_onenand_device = { .name = "omap2-onenand", .id = -1, + .num_resources = 1, + .resource = &gpmc_onenand_resource, }; static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) @@ -390,6 +398,8 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) { + int err; + gpmc_onenand_data = _onenand_data; gpmc_onenand_data->onenand_setup = gpmc_onenand_setup; gpmc_onenand_device.dev.platform_data = gpmc_onenand_data; @@ -401,8 +411,19 @@ void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) gpmc_onenand_data->flags |= ONENAND_SYNC_READ; } + err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE, + (unsigned long *)&gpmc_onenand_resource.start); + if (err < 0) { + pr_err("%s: Cannot request GPMC CS\n", __func__); + return; + } + + gpmc_onenand_resource.end = gpmc_onenand_resource.start + + ONENAND_IO_SIZE - 1; + if (platform_device_register(&gpmc_onenand_device) < 0) { - printk(KERN_ERR "Unable to register OneNAND device\n"); + pr_err("%s: Unable to register OneNAND device\n", __func__); + gpmc_cs_free(gpmc_onenand_data->cs); return; } } diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index ba10c24f3d8d..245839dfc722 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -17,10 +17,11 @@ #include <linux/io.h> #include <linux/smc91x.h> -#include <plat/board.h> #include <plat/gpmc.h> #include <plat/gpmc-smc91x.h> +#include "soc.h" + static struct omap_smc91x_platform_data *gpmc_cfg; static struct resource gpmc_smc91x_resources[] = { diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index b6c77be3e8f7..a3a28878f0c9 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -20,7 +20,6 @@ #include <linux/io.h> #include <linux/smsc911x.h> -#include <plat/board.h> #include <plat/gpmc.h> #include <plat/gpmc-smsc911x.h> diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index b2b5759ab0fe..055ae8bd943f 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -28,8 +28,13 @@ #include <asm/mach-types.h> #include <plat/gpmc.h> +#include <plat/cpu.h> +#include <plat/gpmc.h> #include <plat/sdrc.h> +#include "soc.h" +#include "common.h" + /* GPMC register offsets */ #define GPMC_REVISION 0x00 #define GPMC_SYSCONFIG 0x10 @@ -78,6 +83,15 @@ #define ENABLE_PREFETCH (0x1 << 7) #define DMA_MPU_MODE 2 +/* XXX: Only NAND irq has been considered,currently these are the only ones used + */ +#define GPMC_NR_IRQ 2 + +struct gpmc_client_irq { + unsigned irq; + u32 bitmask; +}; + /* Structure to save gpmc cs context */ struct gpmc_cs_config { u32 config1; @@ -105,6 +119,10 @@ struct omap3_gpmc_regs { struct gpmc_cs_config cs_context[GPMC_CS_NUM]; }; +static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ]; +static struct irq_chip gpmc_irq_chip; +static unsigned gpmc_irq_start; + static struct resource gpmc_mem_root; static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); @@ -682,6 +700,117 @@ int gpmc_prefetch_reset(int cs) } EXPORT_SYMBOL(gpmc_prefetch_reset); +void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) +{ + reg->gpmc_status = gpmc_base + GPMC_STATUS; + reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET + + GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs; + reg->gpmc_nand_address = gpmc_base + GPMC_CS0_OFFSET + + GPMC_CS_NAND_ADDRESS + GPMC_CS_SIZE * cs; + reg->gpmc_nand_data = gpmc_base + GPMC_CS0_OFFSET + + GPMC_CS_NAND_DATA + GPMC_CS_SIZE * cs; + reg->gpmc_prefetch_config1 = gpmc_base + GPMC_PREFETCH_CONFIG1; + reg->gpmc_prefetch_config2 = gpmc_base + GPMC_PREFETCH_CONFIG2; + reg->gpmc_prefetch_control = gpmc_base + GPMC_PREFETCH_CONTROL; + reg->gpmc_prefetch_status = gpmc_base + GPMC_PREFETCH_STATUS; + reg->gpmc_ecc_config = gpmc_base + GPMC_ECC_CONFIG; + reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL; + reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG; + reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT; + reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0; +} + +int gpmc_get_client_irq(unsigned irq_config) +{ + int i; + + if (hweight32(irq_config) > 1) + return 0; + + for (i = 0; i < GPMC_NR_IRQ; i++) + if (gpmc_client_irq[i].bitmask & irq_config) + return gpmc_client_irq[i].irq; + + return 0; +} + +static int gpmc_irq_endis(unsigned irq, bool endis) +{ + int i; + u32 regval; + + for (i = 0; i < GPMC_NR_IRQ; i++) + if (irq == gpmc_client_irq[i].irq) { + regval = gpmc_read_reg(GPMC_IRQENABLE); + if (endis) + regval |= gpmc_client_irq[i].bitmask; + else + regval &= ~gpmc_client_irq[i].bitmask; + gpmc_write_reg(GPMC_IRQENABLE, regval); + break; + } + + return 0; +} + +static void gpmc_irq_disable(struct irq_data *p) +{ + gpmc_irq_endis(p->irq, false); +} + +static void gpmc_irq_enable(struct irq_data *p) +{ + gpmc_irq_endis(p->irq, true); +} + +static void gpmc_irq_noop(struct irq_data *data) { } + +static unsigned int gpmc_irq_noop_ret(struct irq_data *data) { return 0; } + +static int gpmc_setup_irq(int gpmc_irq) +{ + int i; + u32 regval; + + if (!gpmc_irq) + return -EINVAL; + + gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0); + if (IS_ERR_VALUE(gpmc_irq_start)) { + pr_err("irq_alloc_descs failed\n"); + return gpmc_irq_start; + } + + gpmc_irq_chip.name = "gpmc"; + gpmc_irq_chip.irq_startup = gpmc_irq_noop_ret; + gpmc_irq_chip.irq_enable = gpmc_irq_enable; + gpmc_irq_chip.irq_disable = gpmc_irq_disable; + gpmc_irq_chip.irq_shutdown = gpmc_irq_noop; + gpmc_irq_chip.irq_ack = gpmc_irq_noop; + gpmc_irq_chip.irq_mask = gpmc_irq_noop; + gpmc_irq_chip.irq_unmask = gpmc_irq_noop; + + gpmc_client_irq[0].bitmask = GPMC_IRQ_FIFOEVENTENABLE; + gpmc_client_irq[1].bitmask = GPMC_IRQ_COUNT_EVENT; + + for (i = 0; i < GPMC_NR_IRQ; i++) { + gpmc_client_irq[i].irq = gpmc_irq_start + i; + irq_set_chip_and_handler(gpmc_client_irq[i].irq, + &gpmc_irq_chip, handle_simple_irq); + set_irq_flags(gpmc_client_irq[i].irq, + IRQF_VALID | IRQF_NOAUTOEN); + } + + /* Disable interrupts */ + gpmc_write_reg(GPMC_IRQENABLE, 0); + + /* clear interrupts */ + regval = gpmc_read_reg(GPMC_IRQSTATUS); + gpmc_write_reg(GPMC_IRQSTATUS, regval); + + return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL); +} + static void __init gpmc_mem_init(void) { int cs; @@ -711,8 +840,8 @@ static void __init gpmc_mem_init(void) static int __init gpmc_init(void) { - u32 l, irq; - int cs, ret = -EINVAL; + u32 l; + int ret = -EINVAL; int gpmc_irq; char *ck = NULL; @@ -722,16 +851,16 @@ static int __init gpmc_init(void) l = OMAP2420_GPMC_BASE; else l = OMAP34XX_GPMC_BASE; - gpmc_irq = INT_34XX_GPMC_IRQ; + gpmc_irq = 20 + OMAP_INTC_START; } else if (cpu_is_omap34xx()) { ck = "gpmc_fck"; l = OMAP34XX_GPMC_BASE; - gpmc_irq = INT_34XX_GPMC_IRQ; + gpmc_irq = 20 + OMAP_INTC_START; } else if (cpu_is_omap44xx() || soc_is_omap54xx()) { /* Base address and irq number are same for OMAP4/5 */ ck = "gpmc_ck"; l = OMAP44XX_GPMC_BASE; - gpmc_irq = OMAP44XX_IRQ_GPMC; + gpmc_irq = 20 + OMAP44XX_IRQ_GIC_START; } if (WARN_ON(!ck)) @@ -761,16 +890,7 @@ static int __init gpmc_init(void) gpmc_write_reg(GPMC_SYSCONFIG, l); gpmc_mem_init(); - /* initalize the irq_chained */ - irq = OMAP_GPMC_IRQ_BASE; - for (cs = 0; cs < GPMC_CS_NUM; cs++) { - irq_set_chip_and_handler(irq, &dummy_irq_chip, - handle_simple_irq); - set_irq_flags(irq, IRQF_VALID); - irq++; - } - - ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", NULL); + ret = gpmc_setup_irq(gpmc_irq); if (ret) pr_err("gpmc: irq-%d could not claim: err %d\n", gpmc_irq, ret); @@ -780,12 +900,19 @@ postcore_initcall(gpmc_init); static irqreturn_t gpmc_handle_irq(int irq, void *dev) { - u8 cs; + int i; + u32 regval; + + regval = gpmc_read_reg(GPMC_IRQSTATUS); + + if (!regval) + return IRQ_NONE; + + for (i = 0; i < GPMC_NR_IRQ; i++) + if (regval & gpmc_client_irq[i].bitmask) + generic_handle_irq(gpmc_client_irq[i].irq); - /* check cs to invoke the irq */ - cs = ((gpmc_read_reg(GPMC_PREFETCH_CONFIG1)) >> CS_NUM_SHIFT) & 0x7; - if (OMAP_GPMC_IRQ_BASE+cs <= OMAP_GPMC_IRQ_END) - generic_handle_irq(OMAP_GPMC_IRQ_BASE+cs); + gpmc_write_reg(GPMC_IRQSTATUS, regval); return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index a9675d8d1822..80399d740952 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -15,6 +15,8 @@ #include <linux/delay.h> #include <linux/gpio.h> #include <mach/hardware.h> +#include <linux/platform_data/gpio-omap.h> + #include <plat/mmc.h> #include <plat/omap-pm.h> #include <plat/mux.h> diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index a12e224eb97d..fc57e67b321f 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -19,7 +19,6 @@ * */ -#include <plat/cpu.h> #include <plat/i2c.h> #include "common.h" #include <plat/omap_hwmod.h> diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 40373db649aa..7219df0e831a 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -22,10 +22,10 @@ #include <asm/cputype.h> #include "common.h" -#include <plat/cpu.h> #include <mach/id.h> +#include "soc.h" #include "control.h" static unsigned int omap_revision; diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h index be4d290d57ee..5621cc59c9f4 100644 --- a/arch/arm/mach-omap2/include/mach/gpio.h +++ b/arch/arm/mach-omap2/include/mach/gpio.h @@ -1,5 +1,3 @@ /* * arch/arm/mach-omap2/include/mach/gpio.h */ - -#include <plat/gpio.h> diff --git a/arch/arm/mach-omap2/include/mach/hardware.h b/arch/arm/mach-omap2/include/mach/hardware.h index 78edf9d33f71..54492dbf6973 100644 --- a/arch/arm/mach-omap2/include/mach/hardware.h +++ b/arch/arm/mach-omap2/include/mach/hardware.h @@ -1,5 +1,3 @@ /* * arch/arm/mach-omap2/include/mach/hardware.h */ - -#include <plat/hardware.h> diff --git a/arch/arm/mach-omap2/include/mach/irqs.h b/arch/arm/mach-omap2/include/mach/irqs.h index 44dab7725696..ba5282cafa42 100644 --- a/arch/arm/mach-omap2/include/mach/irqs.h +++ b/arch/arm/mach-omap2/include/mach/irqs.h @@ -1,5 +1,3 @@ /* * arch/arm/mach-omap2/include/mach/irqs.h */ - -#include <plat/irqs.h> diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 4d2d981ff5c5..0d79c23e9f88 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -33,6 +33,7 @@ #include <plat/multi.h> #include <plat/dma.h> +#include "soc.h" #include "iomap.h" #include "voltage.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index bcd83db41bbc..efed4f540adb 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -23,8 +23,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> -#include <mach/hardware.h> - +#include "soc.h" #include "iomap.h" #include "common.h" @@ -49,6 +48,8 @@ #define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE) #define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */ #define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */ +#define INTCPS_NR_MIR_REGS 3 +#define INTCPS_NR_IRQS 96 /* * OMAP2 has a number of different interrupt controllers, each interrupt diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 6875be837d9f..0d974565f8ca 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -16,8 +16,10 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/pm_runtime.h> + #include <plat/mailbox.h> -#include <mach/irqs.h> + +#include "soc.h" #define MAILBOX_REVISION 0x000 #define MAILBOX_MESSAGE(m) (0x040 + 4 * (m)) diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 577cb77db26c..d493727632e9 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -18,9 +18,7 @@ #include <linux/platform_device.h> #include <linux/slab.h> -#include <mach/irqs.h> #include <plat/dma.h> -#include <plat/cpu.h> #include <plat/mcbsp.h> #include <plat/omap_device.h> #include <linux/pm_runtime.h> diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c index fb5bc6cf3773..9e57b4aadb06 100644 --- a/arch/arm/mach-omap2/msdi.c +++ b/arch/arm/mach-omap2/msdi.c @@ -23,6 +23,7 @@ #include <linux/kernel.h> #include <linux/err.h> +#include <linux/platform_data/gpio-omap.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index 1be8bcb52e93..df298d46707c 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -14,7 +14,9 @@ #include <linux/platform_device.h> #include <plat/iommu.h> -#include <plat/irqs.h> + +#include "soc.h" +#include "common.h" struct iommu_device { resource_size_t base; @@ -29,7 +31,7 @@ static int num_iommu_devices; static struct iommu_device omap3_devices[] = { { .base = 0x480bd400, - .irq = 24, + .irq = 24 + OMAP_INTC_START, .pdata = { .name = "isp", .nr_tlb_entries = 8, @@ -41,7 +43,7 @@ static struct iommu_device omap3_devices[] = { #if defined(CONFIG_OMAP_IOMMU_IVA2) { .base = 0x5d000000, - .irq = 28, + .irq = 28 + OMAP_INTC_START, .pdata = { .name = "iva2", .nr_tlb_entries = 32, @@ -64,7 +66,7 @@ static struct platform_device *omap3_iommu_pdev[NR_OMAP3_IOMMU_DEVICES]; static struct iommu_device omap4_devices[] = { { .base = OMAP4_MMU1_BASE, - .irq = OMAP44XX_IRQ_DUCATI_MMU, + .irq = 100 + OMAP44XX_IRQ_GIC_START, .pdata = { .name = "ducati", .nr_tlb_entries = 32, @@ -75,7 +77,7 @@ static struct iommu_device omap4_devices[] = { }, { .base = OMAP4_MMU2_BASE, - .irq = OMAP44XX_IRQ_TESLA_MMU, + .irq = 28 + OMAP44XX_IRQ_GIC_START, .pdata = { .name = "tesla", .nr_tlb_entries = 32, diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 637a1bdf2ac4..ff4e6a0e9c7c 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -50,9 +50,8 @@ #include <asm/suspend.h> #include <asm/hardware/cache-l2x0.h> -#include <plat/omap44xx.h> - #include "common.h" +#include "omap44xx.h" #include "omap4-sar-layout.h" #include "pm.h" #include "prcm_mpu44xx.h" diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 9a35adf91232..19cc5f504f7e 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -24,11 +24,11 @@ #include <asm/hardware/gic.h> #include <asm/smp_scu.h> -#include <mach/hardware.h> #include <mach/omap-secure.h> #include <mach/omap-wakeupgen.h> #include <asm/cputype.h> +#include "soc.h" #include "iomap.h" #include "common.h" #include "clockdomain.h" diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 05fdebfaa195..b54427dec2a3 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -30,6 +30,7 @@ #include <mach/omap-wakeupgen.h> #include <mach/omap-secure.h> +#include "soc.h" #include "omap4-sar-layout.h" #include "common.h" diff --git a/arch/arm/plat-omap/include/plat/omap24xx.h b/arch/arm/mach-omap2/omap24xx.h index 92df9e27cc5c..641a2c8d2eee 100644 --- a/arch/arm/plat-omap/include/plat/omap24xx.h +++ b/arch/arm/mach-omap2/omap24xx.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/omap24xx.h - * * This file contains the processor specific definitions * of the TI OMAP24XX. * diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/mach-omap2/omap34xx.h index 0d818acf3917..c0d1b4b1653f 100644 --- a/arch/arm/plat-omap/include/plat/omap34xx.h +++ b/arch/arm/mach-omap2/omap34xx.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/omap34xx.h - * * This file contains the processor specific definitions of the TI OMAP34XX. * * Copyright (C) 2007 Texas Instruments. diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index c29dee998a79..3cd2564ed5cd 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -16,26 +16,25 @@ #include <linux/io.h> #include <linux/platform_device.h> #include <linux/memblock.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/export.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> #include <asm/memblock.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <plat/irqs.h> #include <plat/sram.h> #include <plat/omap-secure.h> #include <plat/mmc.h> -#include <mach/hardware.h> #include <mach/omap-wakeupgen.h> +#include "soc.h" #include "common.h" #include "hsmmc.h" #include "omap4-sar-layout.h" -#include <linux/export.h> #ifdef CONFIG_CACHE_L2X0 static void __iomem *l2cache_base; @@ -171,7 +170,10 @@ static int __init omap_l2_cache_init(void) /* Enable PL310 L2 Cache controller */ omap_smc1(0x102, 0x1); - l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK); + if (of_have_populated_dt()) + l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK); + else + l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK); /* * Override default outer_cache.disable with a OMAP4 diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/mach-omap2/omap44xx.h index c0d478e55c84..43b927b2e2e8 100644 --- a/arch/arm/plat-omap/include/plat/omap44xx.h +++ b/arch/arm/mach-omap2/omap44xx.h @@ -39,12 +39,12 @@ #define IRQ_SIR_IRQ 0x0040 #define OMAP44XX_GIC_DIST_BASE 0x48241000 #define OMAP44XX_GIC_CPU_BASE 0x48240100 +#define OMAP44XX_IRQ_GIC_START 32 #define OMAP44XX_SCU_BASE 0x48240000 #define OMAP44XX_LOCAL_TWD_BASE 0x48240600 #define OMAP44XX_L2CACHE_BASE 0x48242000 #define OMAP44XX_WKUPGEN_BASE 0x48281000 #define OMAP44XX_MCPDM_BASE 0x40132000 -#define OMAP44XX_MCPDM_L3_BASE 0x49032000 #define OMAP44XX_SAR_RAM_BASE 0x4a326000 #define OMAP44XX_MAILBOX_BASE (L4_44XX_BASE + 0xF4000) diff --git a/arch/arm/plat-omap/include/plat/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h index a2582bb3cab3..a2582bb3cab3 100644 --- a/arch/arm/plat-omap/include/plat/omap54xx.h +++ b/arch/arm/mach-omap2/omap54xx.h diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6ca8e519968d..4c6b5a774054 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -139,14 +139,14 @@ #include <linux/slab.h> #include <linux/bootmem.h> -#include "common.h" -#include <plat/cpu.h> -#include "clockdomain.h" -#include "powerdomain.h" #include <plat/clock.h> #include <plat/omap_hwmod.h> #include <plat/prcm.h> +#include "soc.h" +#include "common.h" +#include "clockdomain.h" +#include "powerdomain.h" #include "cm2xxx_3xxx.h" #include "cminst44xx.h" #include "prm2xxx_3xxx.h" @@ -3158,6 +3158,33 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) } /** + * omap_hwmod_fill_dma_resources - fill struct resource array with dma data + * @oh: struct omap_hwmod * + * @res: pointer to the array of struct resource to fill + * + * Fill the struct resource array @res with dma resource data from the + * omap_hwmod @oh. Intended to be called by code that registers + * omap_devices. See also omap_hwmod_count_resources(). Returns the + * number of array elements filled. + */ +int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res) +{ + int i, sdma_reqs_cnt; + int r = 0; + + sdma_reqs_cnt = _count_sdma_reqs(oh); + for (i = 0; i < sdma_reqs_cnt; i++) { + (res + r)->name = (oh->sdma_reqs + i)->name; + (res + r)->start = (oh->sdma_reqs + i)->dma_req; + (res + r)->end = (oh->sdma_reqs + i)->dma_req; + (res + r)->flags = IORESOURCE_DMA; + r++; + } + + return r; +} + +/** * omap_hwmod_get_resource_byname - fetch IP block integration data by name * @oh: struct omap_hwmod * to operate on * @type: one of the IORESOURCE_* constants from include/linux/ioport.h diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 50cfab61b0e2..4e81637640e9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -13,12 +13,9 @@ * XXX these should be marked initdata for multi-OMAP kernels */ #include <plat/omap_hwmod.h> -#include <mach/irqs.h> -#include <plat/cpu.h> #include <plat/dma.h> #include <plat/serial.h> #include <plat/i2c.h> -#include <plat/gpio.h> #include <plat/mcspi.h> #include <plat/dmtimer.h> #include <plat/l3_2xxx.h> @@ -162,9 +159,9 @@ static struct omap_hwmod omap2420_dma_system_hwmod = { /* mailbox */ static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = { - { .name = "dsp", .irq = 26 }, - { .name = "iva", .irq = 34 }, - { .irq = -1 } + { .name = "dsp", .irq = 26 + OMAP_INTC_START, }, + { .name = "iva", .irq = 34 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2420_mailbox_hwmod = { @@ -199,9 +196,9 @@ static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = { /* mcbsp1 */ static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = { - { .name = "tx", .irq = 59 }, - { .name = "rx", .irq = 60 }, - { .irq = -1 } + { .name = "tx", .irq = 59 + OMAP_INTC_START, }, + { .name = "rx", .irq = 60 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2420_mcbsp1_hwmod = { @@ -225,9 +222,9 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod = { /* mcbsp2 */ static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = { - { .name = "tx", .irq = 62 }, - { .name = "rx", .irq = 63 }, - { .irq = -1 } + { .name = "tx", .irq = 62 + OMAP_INTC_START, }, + { .name = "rx", .irq = 63 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2420_mcbsp2_hwmod = { @@ -265,8 +262,8 @@ static struct omap_hwmod_class omap2420_msdi_hwmod_class = { /* msdi1 */ static struct omap_hwmod_irq_info omap2420_msdi1_irqs[] = { - { .irq = 83 }, - { .irq = -1 } + { .irq = 83 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap2420_msdi1_sdma_reqs[] = { diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 58b5bc196d32..ceb23c3fa89d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -13,20 +13,17 @@ * XXX these should be marked initdata for multi-OMAP kernels */ #include <plat/omap_hwmod.h> -#include <mach/irqs.h> -#include <plat/cpu.h> #include <plat/dma.h> #include <plat/serial.h> #include <plat/i2c.h> -#include <plat/gpio.h> #include <plat/mcbsp.h> #include <plat/mcspi.h> #include <plat/dmtimer.h> #include <plat/mmc.h> #include <plat/l3_2xxx.h> +#include "soc.h" #include "omap_hwmod_common_data.h" - #include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" #include "wd_timer.h" @@ -133,8 +130,8 @@ static struct omap_hwmod omap2430_i2c2_hwmod = { /* gpio5 */ static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = { - { .irq = 33 }, /* INT_24XX_GPIO_BANK5 */ - { .irq = -1 } + { .irq = 33 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK5 */ + { .irq = -1 }, }; static struct omap_hwmod omap2430_gpio5_hwmod = { @@ -173,8 +170,8 @@ static struct omap_hwmod omap2430_dma_system_hwmod = { /* mailbox */ static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = { - { .irq = 26 }, - { .irq = -1 } + { .irq = 26 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2430_mailbox_hwmod = { @@ -195,8 +192,8 @@ static struct omap_hwmod omap2430_mailbox_hwmod = { /* mcspi3 */ static struct omap_hwmod_irq_info omap2430_mcspi3_mpu_irqs[] = { - { .irq = 91 }, - { .irq = -1 } + { .irq = 91 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap2430_mcspi3_sdma_reqs[] = { @@ -250,9 +247,9 @@ static struct omap_hwmod_class usbotg_class = { /* usb_otg_hs */ static struct omap_hwmod_irq_info omap2430_usbhsotg_mpu_irqs[] = { - { .name = "mc", .irq = 92 }, - { .name = "dma", .irq = 93 }, - { .irq = -1 } + { .name = "mc", .irq = 92 + OMAP_INTC_START, }, + { .name = "dma", .irq = 93 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2430_usbhsotg_hwmod = { @@ -303,11 +300,11 @@ static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = { /* mcbsp1 */ static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = { - { .name = "tx", .irq = 59 }, - { .name = "rx", .irq = 60 }, - { .name = "ovr", .irq = 61 }, - { .name = "common", .irq = 64 }, - { .irq = -1 } + { .name = "tx", .irq = 59 + OMAP_INTC_START, }, + { .name = "rx", .irq = 60 + OMAP_INTC_START, }, + { .name = "ovr", .irq = 61 + OMAP_INTC_START, }, + { .name = "common", .irq = 64 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2430_mcbsp1_hwmod = { @@ -331,10 +328,10 @@ static struct omap_hwmod omap2430_mcbsp1_hwmod = { /* mcbsp2 */ static struct omap_hwmod_irq_info omap2430_mcbsp2_irqs[] = { - { .name = "tx", .irq = 62 }, - { .name = "rx", .irq = 63 }, - { .name = "common", .irq = 16 }, - { .irq = -1 } + { .name = "tx", .irq = 62 + OMAP_INTC_START, }, + { .name = "rx", .irq = 63 + OMAP_INTC_START, }, + { .name = "common", .irq = 16 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2430_mcbsp2_hwmod = { @@ -358,10 +355,10 @@ static struct omap_hwmod omap2430_mcbsp2_hwmod = { /* mcbsp3 */ static struct omap_hwmod_irq_info omap2430_mcbsp3_irqs[] = { - { .name = "tx", .irq = 89 }, - { .name = "rx", .irq = 90 }, - { .name = "common", .irq = 17 }, - { .irq = -1 } + { .name = "tx", .irq = 89 + OMAP_INTC_START, }, + { .name = "rx", .irq = 90 + OMAP_INTC_START, }, + { .name = "common", .irq = 17 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2430_mcbsp3_hwmod = { @@ -385,10 +382,10 @@ static struct omap_hwmod omap2430_mcbsp3_hwmod = { /* mcbsp4 */ static struct omap_hwmod_irq_info omap2430_mcbsp4_irqs[] = { - { .name = "tx", .irq = 54 }, - { .name = "rx", .irq = 55 }, - { .name = "common", .irq = 18 }, - { .irq = -1 } + { .name = "tx", .irq = 54 + OMAP_INTC_START, }, + { .name = "rx", .irq = 55 + OMAP_INTC_START, }, + { .name = "common", .irq = 18 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap2430_mcbsp4_sdma_chs[] = { @@ -418,10 +415,10 @@ static struct omap_hwmod omap2430_mcbsp4_hwmod = { /* mcbsp5 */ static struct omap_hwmod_irq_info omap2430_mcbsp5_irqs[] = { - { .name = "tx", .irq = 81 }, - { .name = "rx", .irq = 82 }, - { .name = "common", .irq = 19 }, - { .irq = -1 } + { .name = "tx", .irq = 81 + OMAP_INTC_START, }, + { .name = "rx", .irq = 82 + OMAP_INTC_START, }, + { .name = "common", .irq = 19 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap2430_mcbsp5_sdma_chs[] = { @@ -468,8 +465,8 @@ static struct omap_hwmod_class omap2430_mmc_class = { /* MMC/SD/SDIO1 */ static struct omap_hwmod_irq_info omap2430_mmc1_mpu_irqs[] = { - { .irq = 83 }, - { .irq = -1 } + { .irq = 83 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap2430_mmc1_sdma_reqs[] = { @@ -509,8 +506,8 @@ static struct omap_hwmod omap2430_mmc1_hwmod = { /* MMC/SD/SDIO2 */ static struct omap_hwmod_irq_info omap2430_mmc2_mpu_irqs[] = { - { .irq = 86 }, - { .irq = -1 } + { .irq = 86 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap2430_mmc2_sdma_reqs[] = { diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index 102d76e9e9ea..bea700e928e7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -15,8 +15,6 @@ #include <plat/common.h> #include <plat/hdq1w.h> -#include <mach/irqs.h> - #include "omap_hwmod_common_data.h" /* UART */ @@ -182,126 +180,126 @@ struct omap_hwmod_class iva_hwmod_class = { /* Common MPU IRQ line data */ struct omap_hwmod_irq_info omap2_timer1_mpu_irqs[] = { - { .irq = 37, }, - { .irq = -1 } + { .irq = 37 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer2_mpu_irqs[] = { - { .irq = 38, }, - { .irq = -1 } + { .irq = 38 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer3_mpu_irqs[] = { - { .irq = 39, }, - { .irq = -1 } + { .irq = 39 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer4_mpu_irqs[] = { - { .irq = 40, }, - { .irq = -1 } + { .irq = 40 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer5_mpu_irqs[] = { - { .irq = 41, }, - { .irq = -1 } + { .irq = 41 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer6_mpu_irqs[] = { - { .irq = 42, }, - { .irq = -1 } + { .irq = 42 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer7_mpu_irqs[] = { - { .irq = 43, }, - { .irq = -1 } + { .irq = 43 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer8_mpu_irqs[] = { - { .irq = 44, }, - { .irq = -1 } + { .irq = 44 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer9_mpu_irqs[] = { - { .irq = 45, }, - { .irq = -1 } + { .irq = 45 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer10_mpu_irqs[] = { - { .irq = 46, }, - { .irq = -1 } + { .irq = 46 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer11_mpu_irqs[] = { - { .irq = 47, }, - { .irq = -1 } + { .irq = 47 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_uart1_mpu_irqs[] = { - { .irq = INT_24XX_UART1_IRQ, }, - { .irq = -1 } + { .irq = 72 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_uart2_mpu_irqs[] = { - { .irq = INT_24XX_UART2_IRQ, }, - { .irq = -1 } + { .irq = 73 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[] = { - { .irq = INT_24XX_UART3_IRQ, }, - { .irq = -1 } + { .irq = 74 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_dispc_irqs[] = { - { .irq = 25 }, - { .irq = -1 } + { .irq = 25 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[] = { - { .irq = INT_24XX_I2C1_IRQ, }, - { .irq = -1 } + { .irq = 56 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[] = { - { .irq = INT_24XX_I2C2_IRQ, }, - { .irq = -1 } + { .irq = 57 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_gpio1_irqs[] = { - { .irq = 29 }, /* INT_24XX_GPIO_BANK1 */ - { .irq = -1 } + { .irq = 29 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK1 */ + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_gpio2_irqs[] = { - { .irq = 30 }, /* INT_24XX_GPIO_BANK2 */ - { .irq = -1 } + { .irq = 30 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK2 */ + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_gpio3_irqs[] = { - { .irq = 31 }, /* INT_24XX_GPIO_BANK3 */ - { .irq = -1 } + { .irq = 31 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK3 */ + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_gpio4_irqs[] = { - { .irq = 32 }, /* INT_24XX_GPIO_BANK4 */ - { .irq = -1 } + { .irq = 32 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK4 */ + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_dma_system_irqs[] = { - { .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */ - { .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */ - { .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */ - { .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */ - { .irq = -1 } + { .name = "0", .irq = 12 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ0 */ + { .name = "1", .irq = 13 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ1 */ + { .name = "2", .irq = 14 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ2 */ + { .name = "3", .irq = 15 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ3 */ + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[] = { - { .irq = 65 }, - { .irq = -1 } + { .irq = 65 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[] = { - { .irq = 66 }, - { .irq = -1 } + { .irq = 66 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = { @@ -320,7 +318,7 @@ struct omap_hwmod_class omap2_hdq1w_class = { }; struct omap_hwmod_irq_info omap2_hdq1w_mpu_irqs[] = { - { .irq = 58, }, - { .irq = -1 } + { .irq = 58 + OMAP_INTC_START, }, + { .irq = -1 }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index afad69c6ba6e..ceb305242340 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -10,21 +10,19 @@ */ #include <plat/omap_hwmod.h> #include <plat/serial.h> -#include <plat/gpio.h> +#include <linux/platform_data/gpio-omap.h> #include <plat/dma.h> #include <plat/dmtimer.h> #include <plat/mcspi.h> -#include <mach/irqs.h> - #include "omap_hwmod_common_data.h" #include "cm-regbits-24xx.h" #include "prm-regbits-24xx.h" #include "wd_timer.h" struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[] = { - { .irq = 48, }, - { .irq = -1 } + { .irq = 48 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = { diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index c9e38200216b..75fbbac13921 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -15,26 +15,26 @@ * XXX these should be marked initdata for multi-OMAP kernels */ #include <linux/power/smartreflex.h> +#include <linux/platform_data/gpio-omap.h> #include <plat/omap_hwmod.h> -#include <mach/irqs.h> -#include <plat/cpu.h> #include <plat/dma.h> #include <plat/serial.h> #include <plat/l3_3xxx.h> #include <plat/l4_3xxx.h> #include <plat/i2c.h> -#include <plat/gpio.h> #include <plat/mmc.h> #include <plat/mcbsp.h> #include <plat/mcspi.h> #include <plat/dmtimer.h> +#include <mach/am35xx.h> + +#include "soc.h" #include "omap_hwmod_common_data.h" #include "prm-regbits-34xx.h" #include "cm-regbits-34xx.h" #include "wd_timer.h" -#include <mach/am35xx.h> /* * OMAP3xxx hardware module integration data @@ -51,9 +51,9 @@ /* L3 */ static struct omap_hwmod_irq_info omap3xxx_l3_main_irqs[] = { - { .irq = INT_34XX_L3_DBG_IRQ }, - { .irq = INT_34XX_L3_APP_IRQ }, - { .irq = -1 } + { .irq = 9 + OMAP_INTC_START, }, + { .irq = 10 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_l3_main_hwmod = { @@ -355,8 +355,8 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = { /* timer12 */ static struct omap_hwmod_irq_info omap3xxx_timer12_mpu_irqs[] = { - { .irq = 95, }, - { .irq = -1 } + { .irq = 95 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_timer12_hwmod = { @@ -490,8 +490,8 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { /* UART4 */ static struct omap_hwmod_irq_info uart4_mpu_irqs[] = { - { .irq = INT_36XX_UART4_IRQ, }, - { .irq = -1 } + { .irq = 80 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info uart4_sdma_reqs[] = { @@ -518,8 +518,8 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { }; static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = { - { .irq = INT_35XX_UART4_IRQ, }, - { .irq = -1 } + { .irq = 84 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = { @@ -674,8 +674,8 @@ static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = { }; static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = { - { .irq = 25 }, - { .irq = -1 } + { .irq = 25 + OMAP_INTC_START, }, + { .irq = -1 }, }; /* dss_dsi1 */ @@ -804,8 +804,8 @@ static struct omap_i2c_dev_attr i2c3_dev_attr = { }; static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = { - { .irq = INT_34XX_I2C3_IRQ, }, - { .irq = -1 } + { .irq = 61 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info i2c3_sdma_reqs[] = { @@ -963,8 +963,8 @@ static struct omap_hwmod omap3xxx_gpio4_hwmod = { /* gpio5 */ static struct omap_hwmod_irq_info omap3xxx_gpio5_irqs[] = { - { .irq = 33 }, /* INT_34XX_GPIO_BANK5 */ - { .irq = -1 } + { .irq = 33 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK5 */ + { .irq = -1 }, }; static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { @@ -993,8 +993,8 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod = { /* gpio6 */ static struct omap_hwmod_irq_info omap3xxx_gpio6_irqs[] = { - { .irq = 34 }, /* INT_34XX_GPIO_BANK6 */ - { .irq = -1 } + { .irq = 34 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK6 */ + { .irq = -1 }, }; static struct omap_hwmod_opt_clk gpio6_opt_clks[] = { @@ -1098,10 +1098,10 @@ static struct omap_hwmod_opt_clk mcbsp234_opt_clks[] = { /* mcbsp1 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = { - { .name = "common", .irq = 16 }, - { .name = "tx", .irq = 59 }, - { .name = "rx", .irq = 60 }, - { .irq = -1 } + { .name = "common", .irq = 16 + OMAP_INTC_START, }, + { .name = "tx", .irq = 59 + OMAP_INTC_START, }, + { .name = "rx", .irq = 60 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { @@ -1125,10 +1125,10 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { /* mcbsp2 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = { - { .name = "common", .irq = 17 }, - { .name = "tx", .irq = 62 }, - { .name = "rx", .irq = 63 }, - { .irq = -1 } + { .name = "common", .irq = 17 + OMAP_INTC_START, }, + { .name = "tx", .irq = 62 + OMAP_INTC_START, }, + { .name = "rx", .irq = 63 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = { @@ -1157,10 +1157,10 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = { /* mcbsp3 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = { - { .name = "common", .irq = 22 }, - { .name = "tx", .irq = 89 }, - { .name = "rx", .irq = 90 }, - { .irq = -1 } + { .name = "common", .irq = 22 + OMAP_INTC_START, }, + { .name = "tx", .irq = 89 + OMAP_INTC_START, }, + { .name = "rx", .irq = 90 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = { @@ -1189,10 +1189,10 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = { /* mcbsp4 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp4_irqs[] = { - { .name = "common", .irq = 23 }, - { .name = "tx", .irq = 54 }, - { .name = "rx", .irq = 55 }, - { .irq = -1 } + { .name = "common", .irq = 23 + OMAP_INTC_START, }, + { .name = "tx", .irq = 54 + OMAP_INTC_START, }, + { .name = "rx", .irq = 55 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap3xxx_mcbsp4_sdma_chs[] = { @@ -1222,10 +1222,10 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = { /* mcbsp5 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp5_irqs[] = { - { .name = "common", .irq = 27 }, - { .name = "tx", .irq = 81 }, - { .name = "rx", .irq = 82 }, - { .irq = -1 } + { .name = "common", .irq = 27 + OMAP_INTC_START, }, + { .name = "tx", .irq = 81 + OMAP_INTC_START, }, + { .name = "rx", .irq = 82 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap3xxx_mcbsp5_sdma_chs[] = { @@ -1267,8 +1267,8 @@ static struct omap_hwmod_class omap3xxx_mcbsp_sidetone_hwmod_class = { /* mcbsp2_sidetone */ static struct omap_hwmod_irq_info omap3xxx_mcbsp2_sidetone_irqs[] = { - { .name = "irq", .irq = 4 }, - { .irq = -1 } + { .name = "irq", .irq = 4 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = { @@ -1289,8 +1289,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = { /* mcbsp3_sidetone */ static struct omap_hwmod_irq_info omap3xxx_mcbsp3_sidetone_irqs[] = { - { .name = "irq", .irq = 5 }, - { .irq = -1 } + { .name = "irq", .irq = 5 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = { @@ -1352,8 +1352,8 @@ static struct omap_smartreflex_dev_attr sr1_dev_attr = { }; static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = { - { .irq = 18 }, - { .irq = -1 } + { .irq = 18 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap34xx_sr1_hwmod = { @@ -1397,8 +1397,8 @@ static struct omap_smartreflex_dev_attr sr2_dev_attr = { }; static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = { - { .irq = 19 }, - { .irq = -1 } + { .irq = 19 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap34xx_sr2_hwmod = { @@ -1458,8 +1458,8 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = { }; static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = { - { .irq = 26 }, - { .irq = -1 } + { .irq = 26 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_mailbox_hwmod = { @@ -1549,8 +1549,8 @@ static struct omap_hwmod omap34xx_mcspi2 = { /* mcspi3 */ static struct omap_hwmod_irq_info omap34xx_mcspi3_mpu_irqs[] = { - { .name = "irq", .irq = 91 }, /* 91 */ - { .irq = -1 } + { .name = "irq", .irq = 91 + OMAP_INTC_START, }, /* 91 */ + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap34xx_mcspi3_sdma_reqs[] = { @@ -1585,8 +1585,8 @@ static struct omap_hwmod omap34xx_mcspi3 = { /* mcspi4 */ static struct omap_hwmod_irq_info omap34xx_mcspi4_mpu_irqs[] = { - { .name = "irq", .irq = INT_34XX_SPI4_IRQ }, /* 48 */ - { .irq = -1 } + { .name = "irq", .irq = 48 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap34xx_mcspi4_sdma_reqs[] = { @@ -1638,9 +1638,9 @@ static struct omap_hwmod_class usbotg_class = { /* usb_otg_hs */ static struct omap_hwmod_irq_info omap3xxx_usbhsotg_mpu_irqs[] = { - { .name = "mc", .irq = 92 }, - { .name = "dma", .irq = 93 }, - { .irq = -1 } + { .name = "mc", .irq = 92 + OMAP_INTC_START, }, + { .name = "dma", .irq = 93 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { @@ -1670,8 +1670,8 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { /* usb_otg_hs */ static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = { - { .name = "mc", .irq = 71 }, - { .irq = -1 } + { .name = "mc", .irq = 71 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_class am35xx_usbotg_class = { @@ -1706,8 +1706,8 @@ static struct omap_hwmod_class omap34xx_mmc_class = { /* MMC/SD/SDIO1 */ static struct omap_hwmod_irq_info omap34xx_mmc1_mpu_irqs[] = { - { .irq = 83, }, - { .irq = -1 } + { .irq = 83 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap34xx_mmc1_sdma_reqs[] = { @@ -1773,8 +1773,8 @@ static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = { /* MMC/SD/SDIO2 */ static struct omap_hwmod_irq_info omap34xx_mmc2_mpu_irqs[] = { - { .irq = INT_24XX_MMC2_IRQ, }, - { .irq = -1 } + { .irq = 86 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap34xx_mmc2_sdma_reqs[] = { @@ -1834,8 +1834,8 @@ static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = { /* MMC/SD/SDIO3 */ static struct omap_hwmod_irq_info omap34xx_mmc3_mpu_irqs[] = { - { .irq = 94, }, - { .irq = -1 } + { .irq = 94 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap34xx_mmc3_sdma_reqs[] = { @@ -1893,9 +1893,9 @@ static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = { }; static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = { - { .name = "ohci-irq", .irq = 76 }, - { .name = "ehci-irq", .irq = 77 }, - { .irq = -1 } + { .name = "ohci-irq", .irq = 76 + OMAP_INTC_START, }, + { .name = "ehci-irq", .irq = 77 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = { @@ -1987,8 +1987,8 @@ static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = { }; static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = { - { .name = "tll-irq", .irq = 78 }, - { .irq = -1 } + { .name = "tll-irq", .irq = 78 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = { @@ -3214,11 +3214,11 @@ static struct omap_hwmod_ocp_if am35xx_l4_core__mdio = { }; static struct omap_hwmod_irq_info am35xx_emac_mpu_irqs[] = { - { .name = "rxthresh", .irq = INT_35XX_EMAC_C0_RXTHRESH_IRQ }, - { .name = "rx_pulse", .irq = INT_35XX_EMAC_C0_RX_PULSE_IRQ }, - { .name = "tx_pulse", .irq = INT_35XX_EMAC_C0_TX_PULSE_IRQ }, - { .name = "misc_pulse", .irq = INT_35XX_EMAC_C0_MISC_PULSE_IRQ }, - { .irq = -1 } + { .name = "rxthresh", .irq = 67 + OMAP_INTC_START, }, + { .name = "rx_pulse", .irq = 68 + OMAP_INTC_START, }, + { .name = "tx_pulse", .irq = 69 + OMAP_INTC_START }, + { .name = "misc_pulse", .irq = 70 + OMAP_INTC_START }, + { .irq = -1 }, }; static struct omap_hwmod_class am35xx_emac_class = { diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 242aee498ceb..b95244b76a15 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -19,12 +19,11 @@ */ #include <linux/io.h> +#include <linux/platform_data/gpio-omap.h> #include <linux/power/smartreflex.h> #include <plat/omap_hwmod.h> -#include <plat/cpu.h> #include <plat/i2c.h> -#include <plat/gpio.h> #include <plat/dma.h> #include <plat/mcspi.h> #include <plat/mcbsp.h> diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index e7e8eeae95e5..dddb677fed68 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -16,6 +16,7 @@ #include <plat/omap_hwmod.h> +#include "common.h" #include "display.h" /* Common address space across OMAP2xxx */ diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c index d15225ff5c49..f447e02102bb 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.c +++ b/arch/arm/mach-omap2/omap_l3_noc.c @@ -28,6 +28,7 @@ #include <linux/kernel.h> #include <linux/slab.h> +#include "soc.h" #include "omap_l3_noc.h" /* @@ -190,7 +191,7 @@ static int __devinit omap4_l3_probe(struct platform_device *pdev) IRQF_DISABLED, "l3-dbg-irq", l3); if (ret) { pr_crit("L3: request_irq failed to register for 0x%x\n", - OMAP44XX_IRQ_L3_DBG); + 9 + OMAP44XX_IRQ_GIC_START); goto err3; } @@ -200,7 +201,7 @@ static int __devinit omap4_l3_probe(struct platform_device *pdev) IRQF_DISABLED, "l3-app-irq", l3); if (ret) { pr_crit("L3: request_irq failed to register for 0x%x\n", - OMAP44XX_IRQ_L3_APP); + 10 + OMAP44XX_IRQ_GIC_START); goto err4; } diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index d52651a05daa..593eaea35cec 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -29,6 +29,8 @@ #include <linux/usb.h> #include <plat/usb.h> + +#include "soc.h" #include "control.h" /* OMAP control module register for UTMI PHY */ diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c index 5037e76e4e23..a9e8cf21705d 100644 --- a/arch/arm/mach-omap2/opp2420_data.c +++ b/arch/arm/mach-omap2/opp2420_data.c @@ -28,7 +28,7 @@ * http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/ */ -#include <plat/hardware.h> +#include <linux/kernel.h> #include "opp2xxx.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c index 750805c528d8..0e75ec3e114b 100644 --- a/arch/arm/mach-omap2/opp2430_data.c +++ b/arch/arm/mach-omap2/opp2430_data.c @@ -26,7 +26,7 @@ * This is technically part of the OMAP2xxx clock code. */ -#include <plat/hardware.h> +#include <linux/kernel.h> #include "opp2xxx.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c index d95f3f945d4a..75cef5f67a8a 100644 --- a/arch/arm/mach-omap2/opp3xxx_data.c +++ b/arch/arm/mach-omap2/opp3xxx_data.c @@ -19,8 +19,6 @@ */ #include <linux/module.h> -#include <plat/cpu.h> - #include "control.h" #include "omap_opp_data.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index c95415da23c2..a9fd6d5fe79e 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -20,8 +20,7 @@ */ #include <linux/module.h> -#include <plat/cpu.h> - +#include "soc.h" #include "control.h" #include "omap_opp_data.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 814bcd901596..3e1345fc0713 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -28,7 +28,6 @@ #include <linux/slab.h> #include <plat/clock.h> -#include <plat/board.h> #include "powerdomain.h" #include "clockdomain.h" #include <plat/dmtimer.h> diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 2edeffc923a6..8af6cd6ac331 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -29,6 +29,7 @@ #include <linux/irq.h> #include <linux/time.h> #include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> @@ -38,9 +39,6 @@ #include <plat/clock.h> #include <plat/sram.h> #include <plat/dma.h> -#include <plat/board.h> - -#include <mach/irqs.h> #include "common.h" #include "prm2xxx_3xxx.h" @@ -352,16 +350,6 @@ int __init omap2_pm_init(void) prcm_setup_regs(); - /* Hack to prevent MPU retention when STI console is enabled. */ - { - const struct omap_sti_console_config *sti; - - sti = omap_get_config(OMAP_TAG_STI_CONSOLE, - struct omap_sti_console_config); - if (sti != NULL && sti->enable) - sti_console_enabled = 1; - } - /* * We copy the assembler sleep/wakeup routines to SRAM. * These routines need to be in SRAM as that's the only diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 05bd8f02723f..90480f759974 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -28,6 +28,8 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/slab.h> +#include <linux/platform_data/gpio-omap.h> + #include <trace/events/power.h> #include <asm/suspend.h> diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 69b36e185e9b..ca5be83d5019 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -28,11 +28,13 @@ #include "prm44xx.h" #include <asm/cpu.h> -#include <plat/cpu.h> + +#include <plat/prcm.h> + #include "powerdomain.h" #include "clockdomain.h" -#include <plat/prcm.h> +#include "soc.h" #include "pm.h" #define PWRDM_TRACE_STATES_FLAG (1<<31) diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index bb883e463078..8b23d234fb55 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -15,11 +15,9 @@ #include <linux/init.h> #include <linux/bug.h> -#include <plat/cpu.h> - +#include "soc.h" #include "powerdomain.h" #include "powerdomains2xxx_3xxx_data.h" - #include "prcm-common.h" #include "prm2xxx_3xxx.h" #include "prm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 053e24ed3c48..9c9d23c10205 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -27,7 +27,6 @@ #include "common.h" #include <plat/prcm.h> -#include <plat/irqs.h> #include "clock.h" #include "clock2xxx.h" diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index a0309dea6794..9529984d8d2b 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -17,11 +17,10 @@ #include <linux/io.h> #include <linux/irq.h> -#include "common.h" -#include <plat/cpu.h> #include <plat/prcm.h> -#include <plat/irqs.h> +#include "soc.h" +#include "common.h" #include "vp.h" #include "prm2xxx_3xxx.h" @@ -40,7 +39,7 @@ static struct omap_prcm_irq_setup omap3_prcm_irq_setup = { .nr_regs = 1, .irqs = omap3_prcm_irqs, .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs), - .irq = INT_34XX_PRCM_MPU_IRQ, + .irq = 11 + OMAP_INTC_START, .read_pending_irqs = &omap3xxx_prm_read_pending_irqs, .ocp_barrier = &omap3xxx_prm_ocp_barrier, .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen, diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index bb727c2d9337..f0c4d5f4a174 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -17,10 +17,9 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/cpu.h> -#include <plat/irqs.h> #include <plat/prcm.h> +#include "soc.h" #include "iomap.h" #include "common.h" #include "vp.h" @@ -40,7 +39,7 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = { .nr_regs = 2, .irqs = omap4_prcm_irqs, .nr_irqs = ARRAY_SIZE(omap4_prcm_irqs), - .irq = OMAP44XX_IRQ_PRCM, + .irq = 11 + OMAP44XX_IRQ_GIC_START, .read_pending_irqs = &omap44xx_prm_read_pending_irqs, .ocp_barrier = &omap44xx_prm_ocp_barrier, .save_and_clear_irqen = &omap44xx_prm_save_and_clear_irqen, diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 03b126d9ad94..6b4d332be2f6 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -26,7 +26,6 @@ #include <plat/common.h> #include <plat/prcm.h> -#include <plat/irqs.h> #include "prm2xxx_3xxx.h" #include "prm44xx.h" diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 1133bb2f632b..73e55e485329 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -24,11 +24,11 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/hardware.h> #include <plat/clock.h> #include <plat/sram.h> #include <plat/sdrc.h> +#include "soc.h" #include "iomap.h" #include "common.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index c1b93c752d70..7ca266e987f6 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -29,11 +29,11 @@ #include <plat/omap-serial.h> #include "common.h" -#include <plat/board.h> #include <plat/dma.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> #include <plat/omap-pm.h> +#include <plat/serial.h> #include "prm2xxx_3xxx.h" #include "pm.h" @@ -81,8 +81,9 @@ static struct omap_uart_port_info omap_serial_default_info[] __initdata = { }; #ifdef CONFIG_PM -static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) +static void omap_uart_enable_wakeup(struct device *dev, bool enable) { + struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); if (!od) @@ -99,15 +100,17 @@ static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) * in Smartidle Mode When Configured for DMA Operations. * WA: configure uart in force idle mode. */ -static void omap_uart_set_noidle(struct platform_device *pdev) +static void omap_uart_set_noidle(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); } -static void omap_uart_set_smartidle(struct platform_device *pdev) +static void omap_uart_set_smartidle(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); u8 idlemode; @@ -120,10 +123,10 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) } #else -static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) +static void omap_uart_enable_wakeup(struct device *dev, bool enable) {} -static void omap_uart_set_noidle(struct platform_device *pdev) {} -static void omap_uart_set_smartidle(struct platform_device *pdev) {} +static void omap_uart_set_noidle(struct device *dev) {} +static void omap_uart_set_smartidle(struct device *dev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX @@ -304,6 +307,9 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.dma_rx_timeout = info->dma_rx_timeout; omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate; omap_up.autosuspend_timeout = info->autosuspend_timeout; + omap_up.DTR_gpio = info->DTR_gpio; + omap_up.DTR_inverted = info->DTR_inverted; + omap_up.DTR_present = info->DTR_present; pdata = &omap_up; pdata_size = sizeof(struct omap_uart_port_info); diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index d4bf904d84ab..ce0ccd26efbd 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -28,8 +28,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <plat/omap24xx.h> - +#include "omap24xx.h" #include "sdrc.h" /* First address of reserved address space? apparently valid for OMAP2 & 3 */ diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 1f62f23673fb..506987979c1c 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -26,9 +26,9 @@ #include <asm/assembler.h> -#include <plat/hardware.h> #include <plat/sram.h> +#include "omap34xx.h" #include "iomap.h" #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 91e71d8f46f0..b7d8ead4b86a 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -14,10 +14,10 @@ #include <asm/memory.h> #include <asm/hardware/cache-l2x0.h> -#include <plat/omap44xx.h> #include <mach/omap-secure.h> #include "common.h" +#include "omap44xx.h" #include "omap4-sar-layout.h" #if defined(CONFIG_SMP) && defined(CONFIG_PM) diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h new file mode 100644 index 000000000000..fc9b96daf851 --- /dev/null +++ b/arch/arm/mach-omap2/soc.h @@ -0,0 +1,7 @@ +#include <plat/cpu.h> +#include "omap24xx.h" +#include "omap34xx.h" +#include "omap44xx.h" +#include "ti81xx.h" +#include "am33xx.h" +#include "omap54xx.h" diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index ee0bfcc1410f..8f7326cd435b 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -32,8 +32,7 @@ #include <asm/assembler.h> -#include <mach/hardware.h> - +#include "soc.h" #include "iomap.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index d4d39ef04769..b140d6578529 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -32,8 +32,7 @@ #include <asm/assembler.h> -#include <mach/hardware.h> - +#include "soc.h" #include "iomap.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index df5a21322b0a..2d0ceaa23fb8 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -29,8 +29,7 @@ #include <asm/assembler.h> -#include <mach/hardware.h> - +#include "soc.h" #include "iomap.h" #include "sdrc.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/plat-omap/include/plat/ti81xx.h b/arch/arm/mach-omap2/ti81xx.h index 8f9843f78422..8f9843f78422 100644 --- a/arch/arm/plat-omap/include/plat/ti81xx.h +++ b/arch/arm/mach-omap2/ti81xx.h diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 2ff6d41ec6c6..e2084facca59 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -36,16 +36,19 @@ #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/slab.h> +#include <linux/of.h> #include <asm/mach/time.h> -#include <plat/dmtimer.h> #include <asm/smp_twd.h> #include <asm/sched_clock.h> -#include "common.h" + #include <plat/omap_hwmod.h> #include <plat/omap_device.h> +#include <plat/dmtimer.h> #include <plat/omap-pm.h> +#include "soc.h" +#include "common.h" #include "powerdomain.h" /* Parent clocks, eventually these will come from the clock framework */ @@ -373,8 +376,7 @@ OMAP_SYS_TIMER(3_am33xx) #ifdef CONFIG_ARCH_OMAP4 #ifdef CONFIG_LOCAL_TIMERS static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, - OMAP44XX_LOCAL_TWD_BASE, - OMAP44XX_IRQ_LOCALTIMER); + OMAP44XX_LOCAL_TWD_BASE, 29 + OMAP_INTC_START); #endif static void __init omap4_timer_init(void) @@ -386,6 +388,11 @@ static void __init omap4_timer_init(void) if (omap_rev() != OMAP4430_REV_ES1_0) { int err; + if (of_have_populated_dt()) { + twd_local_timer_of_register(); + return; + } + err = twd_local_timer_register(&twd_local_timer); if (err) pr_err("twd_local_timer_register failed %d\n", err); diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index db5ff6642375..99be94e94547 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -29,6 +29,7 @@ #include <plat/i2c.h> #include <plat/usb.h> +#include "soc.h" #include "twl-common.h" #include "pm.h" #include "voltage.h" @@ -84,7 +85,7 @@ void __init omap4_pmic_init(const char *pmic_type, omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(omap4_i2c1_board_info[0].type, pmic_type, sizeof(omap4_i2c1_board_info[0].type)); - omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N; + omap4_i2c1_board_info[0].irq = 7 + OMAP44XX_IRQ_GIC_START; omap4_i2c1_board_info[0].platform_data = pmic_data; /* TWL6040 audio IC part */ diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 8fe71cfd002c..d109c09ef34b 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -1,7 +1,7 @@ #ifndef __OMAP_PMIC_COMMON__ #define __OMAP_PMIC_COMMON__ -#include <plat/irqs.h> +#include "common.h" #define TWL_COMMON_PDATA_USB (1 << 0) #define TWL_COMMON_PDATA_BCI (1 << 1) @@ -40,13 +40,13 @@ void omap_pmic_late_init(void); static inline void omap2_pmic_init(const char *pmic_type, struct twl4030_platform_data *pmic_data) { - omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data); + omap_pmic_init(2, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data); } static inline void omap3_pmic_init(const char *pmic_type, struct twl4030_platform_data *pmic_data) { - omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); + omap_pmic_init(1, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data); } void omap4_pmic_init(const char *pmic_type, diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index dde8a11f47d5..ac95daaa4702 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -25,8 +25,6 @@ #include <asm/io.h> -#include <mach/hardware.h> -#include <mach/irqs.h> #include <plat/usb.h> #include <plat/omap_device.h> diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index c4a576856661..89150b2435e5 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -23,14 +23,13 @@ #include <linux/clk.h> #include <linux/dma-mapping.h> #include <linux/io.h> - #include <linux/usb/musb.h> -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <mach/am35xx.h> #include <plat/usb.h> #include <plat/omap_device.h> + +#include <mach/am35xx.h> + #include "mux.h" static struct musb_hdrc_config musb_config = { diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 84da34f9a7cf..b451f3c13292 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -12,8 +12,7 @@ #include <linux/init.h> #include <linux/bug.h> -#include <plat/cpu.h> - +#include "soc.h" #include "voltage.h" #include "vc.h" #include "prm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index d0103c80d040..63afbfed3cbc 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -18,9 +18,8 @@ #include <linux/err.h> #include <linux/init.h> +#include "soc.h" #include "common.h" -#include <plat/cpu.h> - #include "prm-regbits-34xx.h" #include "omap_opp_data.h" #include "voltage.h" diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index cf10f92856dc..453a6e50db8b 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -520,13 +520,14 @@ static struct platform_device hdmi_lcdc_device = { }; /* GPIO KEY */ -#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } +#define GPIO_KEY(c, g, d, ...) \ + { .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ } static struct gpio_keys_button gpio_buttons[] = { - GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW1"), - GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW2"), - GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW3"), - GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW4"), + GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW3", .wakeup = 1), + GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW4"), + GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW5"), + GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW6"), }; static struct gpio_keys_platform_data gpio_key_info = { @@ -901,8 +902,8 @@ static struct platform_device *eva_devices[] __initdata = { &camera_device, &ceu0_device, &fsi_device, - &fsi_hdmi_device, &fsi_wm8978_device, + &fsi_hdmi_device, }; static void __init eva_clock_init(void) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7ea2b31e3199..c129542f6aed 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -695,6 +695,7 @@ static struct platform_device usbhs0_device = { * - J30 "open" * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET * - add .get_vbus = usbhs_get_vbus in usbhs1_private + * - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices. */ #define IRQ8 evt2irq(0x0300) #define USB_PHY_MODE (1 << 4) @@ -1325,8 +1326,8 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usbhs1_device, &usbhs0_device, + &usbhs1_device, &leds_device, &fsi_device, &fsi_ak4643_device, diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 3a528cf4366c..fcf5a47f4772 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -67,7 +67,7 @@ static struct smsc911x_platform_config smsc911x_platdata = { static struct platform_device eth_device = { .name = "smsc911x", - .id = 0, + .id = -1, .dev = { .platform_data = &smsc911x_platdata, }, diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index ee447404c857..588555a67d9c 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -259,9 +259,9 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on) return 0; /* always allow wakeup */ } -#define RELOC_BASE 0x1000 +#define RELOC_BASE 0x1200 -/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */ +/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */ #define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE) INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index a534d8880de1..1d2e3c6f8b59 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -524,33 +524,12 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = { }; #endif -#define PRCC_K_SOFTRST_SET 0x18 -#define PRCC_K_SOFTRST_CLEAR 0x1C -static void ux500_uart0_reset(void) -{ - void __iomem *prcc_rst_set, *prcc_rst_clr; - - prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + - PRCC_K_SOFTRST_SET); - prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + - PRCC_K_SOFTRST_CLEAR); - - /* Activate soft reset PRCC_K_SOFTRST_CLEAR */ - writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr); - udelay(1); - - /* Release soft reset PRCC_K_SOFTRST_SET */ - writel((readl(prcc_rst_set) | 0x1), prcc_rst_set); - udelay(1); -} - static struct amba_pl011_data uart0_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart0_dma_cfg_rx, .dma_tx_param = &uart0_dma_cfg_tx, #endif - .reset = ux500_uart0_reset, }; static struct amba_pl011_data uart1_plat = { diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 4e7d1182e8a3..051204fc4617 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -267,17 +267,19 @@ static void __dma_free_remap(void *cpu_addr, size_t size) vunmap(cpu_addr); } +#define DEFAULT_DMA_COHERENT_POOL_SIZE SZ_256K + struct dma_pool { size_t size; spinlock_t lock; unsigned long *bitmap; unsigned long nr_pages; void *vaddr; - struct page *page; + struct page **pages; }; static struct dma_pool atomic_pool = { - .size = SZ_256K, + .size = DEFAULT_DMA_COHERENT_POOL_SIZE, }; static int __init early_coherent_pool(char *p) @@ -287,6 +289,21 @@ static int __init early_coherent_pool(char *p) } early_param("coherent_pool", early_coherent_pool); +void __init init_dma_coherent_pool_size(unsigned long size) +{ + /* + * Catch any attempt to set the pool size too late. + */ + BUG_ON(atomic_pool.vaddr); + + /* + * Set architecture specific coherent pool size only if + * it has not been changed by kernel command line parameter. + */ + if (atomic_pool.size == DEFAULT_DMA_COHERENT_POOL_SIZE) + atomic_pool.size = size; +} + /* * Initialise the coherent pool for atomic allocations. */ @@ -297,6 +314,7 @@ static int __init atomic_pool_init(void) unsigned long nr_pages = pool->size >> PAGE_SHIFT; unsigned long *bitmap; struct page *page; + struct page **pages; void *ptr; int bitmap_size = BITS_TO_LONGS(nr_pages) * sizeof(long); @@ -304,21 +322,31 @@ static int __init atomic_pool_init(void) if (!bitmap) goto no_bitmap; + pages = kzalloc(nr_pages * sizeof(struct page *), GFP_KERNEL); + if (!pages) + goto no_pages; + if (IS_ENABLED(CONFIG_CMA)) ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page); else ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot, &page, NULL); if (ptr) { + int i; + + for (i = 0; i < nr_pages; i++) + pages[i] = page + i; + spin_lock_init(&pool->lock); pool->vaddr = ptr; - pool->page = page; + pool->pages = pages; pool->bitmap = bitmap; pool->nr_pages = nr_pages; pr_info("DMA: preallocated %u KiB pool for atomic coherent allocations\n", (unsigned)pool->size / 1024); return 0; } +no_pages: kfree(bitmap); no_bitmap: pr_err("DMA: failed to allocate %u KiB pool for atomic coherent allocation\n", @@ -443,27 +471,45 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) if (pageno < pool->nr_pages) { bitmap_set(pool->bitmap, pageno, count); ptr = pool->vaddr + PAGE_SIZE * pageno; - *ret_page = pool->page + pageno; + *ret_page = pool->pages[pageno]; + } else { + pr_err_once("ERROR: %u KiB atomic DMA coherent pool is too small!\n" + "Please increase it with coherent_pool= kernel parameter!\n", + (unsigned)pool->size / 1024); } spin_unlock_irqrestore(&pool->lock, flags); return ptr; } +static bool __in_atomic_pool(void *start, size_t size) +{ + struct dma_pool *pool = &atomic_pool; + void *end = start + size; + void *pool_start = pool->vaddr; + void *pool_end = pool->vaddr + pool->size; + + if (start < pool_start || start > pool_end) + return false; + + if (end <= pool_end) + return true; + + WARN(1, "Wrong coherent size(%p-%p) from atomic pool(%p-%p)\n", + start, end - 1, pool_start, pool_end - 1); + + return false; +} + static int __free_from_pool(void *start, size_t size) { struct dma_pool *pool = &atomic_pool; unsigned long pageno, count; unsigned long flags; - if (start < pool->vaddr || start > pool->vaddr + pool->size) + if (!__in_atomic_pool(start, size)) return 0; - if (start + size > pool->vaddr + pool->size) { - WARN(1, "freeing wrong coherent size from pool\n"); - return 0; - } - pageno = (start - pool->vaddr) >> PAGE_SHIFT; count = size >> PAGE_SHIFT; @@ -1090,10 +1136,22 @@ static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t si return 0; } +static struct page **__atomic_get_pages(void *addr) +{ + struct dma_pool *pool = &atomic_pool; + struct page **pages = pool->pages; + int offs = (addr - pool->vaddr) >> PAGE_SHIFT; + + return pages + offs; +} + static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) { struct vm_struct *area; + if (__in_atomic_pool(cpu_addr, PAGE_SIZE)) + return __atomic_get_pages(cpu_addr); + if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) return cpu_addr; @@ -1103,6 +1161,34 @@ static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) return NULL; } +static void *__iommu_alloc_atomic(struct device *dev, size_t size, + dma_addr_t *handle) +{ + struct page *page; + void *addr; + + addr = __alloc_from_pool(size, &page); + if (!addr) + return NULL; + + *handle = __iommu_create_mapping(dev, &page, size); + if (*handle == DMA_ERROR_CODE) + goto err_mapping; + + return addr; + +err_mapping: + __free_from_pool(addr, size); + return NULL; +} + +static void __iommu_free_atomic(struct device *dev, struct page **pages, + dma_addr_t handle, size_t size) +{ + __iommu_remove_mapping(dev, handle, size); + __free_from_pool(page_address(pages[0]), size); +} + static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs) { @@ -1113,6 +1199,9 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, *handle = DMA_ERROR_CODE; size = PAGE_ALIGN(size); + if (gfp & GFP_ATOMIC) + return __iommu_alloc_atomic(dev, size, handle); + pages = __iommu_alloc_buffer(dev, size, gfp); if (!pages) return NULL; @@ -1179,6 +1268,11 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, return; } + if (__in_atomic_pool(cpu_addr, size)) { + __iommu_free_atomic(dev, pages, handle, size); + return; + } + if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) { unmap_kernel_range((unsigned long)cpu_addr, size); vunmap(cpu_addr); diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index dd36eba9506c..d15a4a6d6146 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -25,6 +25,7 @@ config ARCH_OMAP2PLUS bool "TI OMAP2/3/4" select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP + select SPARSE_IRQ select OMAP_DM_TIMER select USE_OF select PROC_DEVICETREE if PROC_FS diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 961bf859bc0c..a017e994e006 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,8 +3,7 @@ # # Common support -obj-y := common.o sram.o clock.o devices.o dma.o mux.o \ - fb.o counter_32k.o +obj-y := common.o sram.o clock.o dma.o mux.o fb.o counter_32k.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 89a3723b3538..e5778ed689d8 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -17,52 +17,12 @@ #include <linux/dma-mapping.h> #include <plat/common.h> -#include <plat/board.h> #include <plat/vram.h> #include <plat/dsp.h> #include <plat/dma.h> #include <plat/omap-secure.h> - -#define NO_LENGTH_CHECK 0xffffffff - -struct omap_board_config_kernel *omap_board_config __initdata; -int omap_board_config_size; - -static const void *__init get_config(u16 tag, size_t len, - int skip, size_t *len_out) -{ - struct omap_board_config_kernel *kinfo = NULL; - int i; - - /* Try to find the config from the board-specific structures - * in the kernel. */ - for (i = 0; i < omap_board_config_size; i++) { - if (omap_board_config[i].tag == tag) { - if (skip == 0) { - kinfo = &omap_board_config[i]; - break; - } else { - skip--; - } - } - } - if (kinfo == NULL) - return NULL; - return kinfo->data; -} - -const void *__init __omap_get_config(u16 tag, size_t len, int nr) -{ - return get_config(tag, len, nr, NULL); -} - -const void *__init omap_get_var_config(u16 tag, size_t *len) -{ - return get_config(tag, NO_LENGTH_CHECK, 0, len); -} - void __init omap_reserve(void) { omap_vram_reserve_sdram_memblock(); diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index dbf1e03029a5..2e826f1faf7b 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -22,10 +22,7 @@ #include <asm/mach/time.h> #include <asm/sched_clock.h> -#include <plat/hardware.h> #include <plat/common.h> -#include <plat/board.h> - #include <plat/clock.h> /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index caa1f7b6cc21..c7a4c0902b38 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -17,9 +17,6 @@ #include <mach/hardware.h> -#include <plat/board.h> - - /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. */ diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index 39407cbe34c6..195aaae65872 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -12,6 +12,7 @@ #include <linux/platform_device.h> #include <linux/leds.h> #include <linux/io.h> +#include <linux/platform_data/gpio-omap.h> #include <mach/hardware.h> #include <asm/leds.h> diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c deleted file mode 100644 index 1cba9273d2cb..000000000000 --- a/arch/arm/plat-omap/devices.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * linux/arch/arm/plat-omap/devices.c - * - * Common platform device setup/initialization for OMAP1 and OMAP2 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#include <linux/gpio.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/memblock.h> - -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/map.h> -#include <asm/memblock.h> - -#include <plat/tc.h> -#include <plat/board.h> -#include <plat/mmc.h> -#include <plat/menelaus.h> -#include <plat/omap44xx.h> - -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE) - -#ifdef CONFIG_ARCH_OMAP2 -#define OMAP_RNG_BASE 0x480A0000 -#else -#define OMAP_RNG_BASE 0xfffe5000 -#endif - -static struct resource rng_resources[] = { - { - .start = OMAP_RNG_BASE, - .end = OMAP_RNG_BASE + 0x4f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_rng_device = { - .name = "omap_rng", - .id = -1, - .num_resources = ARRAY_SIZE(rng_resources), - .resource = rng_resources, -}; - -static void omap_init_rng(void) -{ - (void) platform_device_register(&omap_rng_device); -} -#else -static inline void omap_init_rng(void) {} -#endif - -/* - * This gets called after board-specific INIT_MACHINE, and initializes most - * on-chip peripherals accessible on this board (except for few like USB): - * - * (a) Does any "standard config" pin muxing needed. Board-specific - * code will have muxed GPIO pins and done "nonstandard" setup; - * that code could live in the boot loader. - * (b) Populating board-specific platform_data with the data drivers - * rely on to handle wiring variations. - * (c) Creating platform devices as meaningful on this board and - * with this kernel configuration. - * - * Claiming GPIOs, and setting their direction and initial values, is the - * responsibility of the device drivers. So is responding to probe(). - * - * Board-specific knowledge like creating devices or pin setup is to be - * kept out of drivers as much as possible. In particular, pin setup - * may be handled by the boot loader, and drivers should expect it will - * normally have been done by the time they're probed. - */ -static int __init omap_init_devices(void) -{ - /* please keep these calls, and their implementations above, - * in alphabetical order so they're easier to sort through. - */ - omap_init_rng(); - return 0; -} -arch_initcall(omap_init_devices); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 7fe626761e53..6dcad5873d57 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -36,9 +36,8 @@ #include <linux/slab.h> #include <linux/delay.h> -#include <mach/hardware.h> +#include <plat/cpu.h> #include <plat/dma.h> - #include <plat/tc.h> /* diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index dd6f92c99e56..bcbb9d5dc293 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -33,8 +33,6 @@ #include <mach/hardware.h> #include <asm/mach/map.h> -#include <plat/board.h> - #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) static bool omapfb_lcd_configured; diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index db071bc71c4d..40bc06a7ac43 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -39,6 +39,7 @@ #define OMAP_I2C_SIZE 0x3f #define OMAP1_I2C_BASE 0xfffb3800 +#define OMAP1_INT_I2C (32 + 4) static const char name[] = "omap_i2c"; @@ -105,7 +106,7 @@ static inline int omap1_i2c_add_bus(int bus_id) res = pdev->resource; res[0].start = OMAP1_I2C_BASE; res[0].end = res[0].start + OMAP_I2C_SIZE; - res[1].start = INT_I2C; + res[1].start = OMAP1_INT_I2C; pdata = &i2c_pdata[bus_id - 1]; /* all OMAP1 have IP version 1 register set */ diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h deleted file mode 100644 index e62f20a5c0af..000000000000 --- a/arch/arm/plat-omap/include/plat/board.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board.h - * - * Information structures for board-specific data - * - * Copyright (C) 2004 Nokia Corporation - * Written by Juha Yrjölä <juha.yrjola@nokia.com> - */ - -#ifndef _OMAP_BOARD_H -#define _OMAP_BOARD_H - -#include <linux/types.h> - -#include <plat/gpio-switch.h> - -/* - * OMAP35x EVM revision - * Run time detection of EVM revision is done by reading Ethernet - * PHY ID - - * GEN_1 = 0x01150000 - * GEN_2 = 0x92200000 - */ -enum { - OMAP3EVM_BOARD_GEN_1 = 0, /* EVM Rev between A - D */ - OMAP3EVM_BOARD_GEN_2, /* EVM Rev >= Rev E */ -}; - -/* Different peripheral ids */ -#define OMAP_TAG_CLOCK 0x4f01 -#define OMAP_TAG_GPIO_SWITCH 0x4f06 -#define OMAP_TAG_STI_CONSOLE 0x4f09 -#define OMAP_TAG_CAMERA_SENSOR 0x4f0a - -#define OMAP_TAG_BOOT_REASON 0x4f80 -#define OMAP_TAG_FLASH_PART 0x4f81 -#define OMAP_TAG_VERSION_STR 0x4f82 - -struct omap_clock_config { - /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */ - u8 system_clock_type; -}; - -struct omap_serial_console_config { - u8 console_uart; - u32 console_speed; -}; - -struct omap_sti_console_config { - unsigned enable:1; - u8 channel; -}; - -struct omap_camera_sensor_config { - u16 reset_gpio; - int (*power_on)(void * data); - int (*power_off)(void * data); -}; - -struct omap_lcd_config { - char panel_name[16]; - char ctrl_name[16]; - s16 nreset_gpio; - u8 data_lines; -}; - -struct device; -struct fb_info; -struct omap_backlight_config { - int default_intensity; - int (*set_power)(struct device *dev, int state); -}; - -struct omap_fbmem_config { - u32 start; - u32 size; -}; - -struct omap_pwm_led_platform_data { - const char *name; - int intensity_timer; - int blink_timer; - void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off); -}; - -struct omap_uart_config { - /* Bit field of UARTs present; bit 0 --> UART1 */ - unsigned int enabled_uarts; -}; - - -struct omap_flash_part_config { - char part_table[0]; -}; - -struct omap_boot_reason_config { - char reason_str[12]; -}; - -struct omap_version_config { - char component[12]; - char version[12]; -}; - -struct omap_board_config_entry { - u16 tag; - u16 len; - u8 data[0]; -}; - -struct omap_board_config_kernel { - u16 tag; - const void *data; -}; - -extern const void *__init __omap_get_config(u16 tag, size_t len, int nr); - -#define omap_get_config(tag, type) \ - ((const type *) __omap_get_config((tag), sizeof(type), 0)) -#define omap_get_nr_config(tag, type, nr) \ - ((const type *) __omap_get_config((tag), sizeof(type), (nr))) - -extern const void *__init omap_get_var_config(u16 tag, size_t *len); - -extern struct omap_board_config_kernel *omap_board_config; -extern int omap_board_config_size; - - -/* for TI reference platforms sharing the same debug card */ -extern int debug_card_init(u32 addr, unsigned gpio); - -/* OMAP3EVM revision */ -#if defined(CONFIG_MACH_OMAP3EVM) -u8 get_omap3_evm_rev(void); -#else -#define get_omap3_evm_rev() (-EINVAL) -#endif -#endif diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index bb5d08a70dbc..67da857783ce 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -30,6 +30,8 @@ #ifndef __ASM_ARCH_OMAP_CPU_H #define __ASM_ARCH_OMAP_CPU_H +#ifndef __ASSEMBLY__ + #include <linux/bitops.h> #include <plat/multi.h> @@ -493,4 +495,5 @@ OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ) OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ) OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ) +#endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/plat-omap/include/plat/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h new file mode 100644 index 000000000000..a4edbd2f7484 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/debug-devices.h @@ -0,0 +1,9 @@ +#ifndef _OMAP_DEBUG_DEVICES_H +#define _OMAP_DEBUG_DEVICES_H + +#include <linux/types.h> + +/* for TI reference platforms sharing the same debug card */ +extern int debug_card_init(u32 addr, unsigned gpio); + +#endif diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index c5811d4409b0..0a87b052f8f7 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -31,6 +31,8 @@ /* Move omap4 specific defines to dma-44xx.h */ #include "dma-44xx.h" +#define INT_DMA_LCD 25 + /* DMA channels for omap1 */ #define OMAP_DMA_NO_DEVICE 0 #define OMAP_DMA_MCSI1_TX 1 diff --git a/arch/arm/plat-omap/include/plat/gpio-switch.h b/arch/arm/plat-omap/include/plat/gpio-switch.h deleted file mode 100644 index 10da0e07c0cf..000000000000 --- a/arch/arm/plat-omap/include/plat/gpio-switch.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * GPIO switch definitions - * - * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H -#define __ASM_ARCH_OMAP_GPIO_SWITCH_H - -#include <linux/types.h> - -/* Cover: - * high -> closed - * low -> open - * Connection: - * high -> connected - * low -> disconnected - * Activity: - * high -> active - * low -> inactive - * - */ -#define OMAP_GPIO_SWITCH_TYPE_COVER 0x0000 -#define OMAP_GPIO_SWITCH_TYPE_CONNECTION 0x0001 -#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY 0x0002 -#define OMAP_GPIO_SWITCH_FLAG_INVERTED 0x0001 -#define OMAP_GPIO_SWITCH_FLAG_OUTPUT 0x0002 - -struct omap_gpio_switch { - const char *name; - s16 gpio; - unsigned flags:4; - unsigned type:4; - - /* Time in ms to debounce when transitioning from - * inactive state to active state. */ - u16 debounce_rising; - /* Same for transition from active to inactive state. */ - u16 debounce_falling; - - /* notify board-specific code about state changes */ - void (* notify)(void *data, int state); - void *notify_data; -}; - -/* Call at init time only */ -extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl, - int count); - -#endif diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index f37764a36072..2e6e2597178c 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -133,6 +133,25 @@ struct gpmc_timings { u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ }; +struct gpmc_nand_regs { + void __iomem *gpmc_status; + void __iomem *gpmc_nand_command; + void __iomem *gpmc_nand_address; + void __iomem *gpmc_nand_data; + void __iomem *gpmc_prefetch_config1; + void __iomem *gpmc_prefetch_config2; + void __iomem *gpmc_prefetch_control; + void __iomem *gpmc_prefetch_status; + void __iomem *gpmc_ecc_config; + void __iomem *gpmc_ecc_control; + void __iomem *gpmc_ecc_size_config; + void __iomem *gpmc_ecc1_result; + void __iomem *gpmc_bch_result0; +}; + +extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs); +extern int gpmc_get_client_irq(unsigned irq_config); + extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps); extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h deleted file mode 100644 index ddbde38e1e33..000000000000 --- a/arch/arm/plat-omap/include/plat/hardware.h +++ /dev/null @@ -1,293 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/hardware.h - * - * Hardware definitions for TI OMAP processors and boards - * - * NOTE: Please put device driver specific defines into a separate header - * file for each driver. - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> - * - * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com> - * and Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_HARDWARE_H -#define __ASM_ARCH_OMAP_HARDWARE_H - -#include <asm/sizes.h> -#ifndef __ASSEMBLER__ -#include <asm/types.h> -#include <plat/cpu.h> -#endif -#include <plat/serial.h> - -/* - * --------------------------------------------------------------------------- - * Common definitions for all OMAP processors - * NOTE: Put all processor or board specific parts to the special header - * files. - * --------------------------------------------------------------------------- - */ - -/* - * ---------------------------------------------------------------------------- - * Timers - * ---------------------------------------------------------------------------- - */ -#define OMAP_MPU_TIMER1_BASE (0xfffec500) -#define OMAP_MPU_TIMER2_BASE (0xfffec600) -#define OMAP_MPU_TIMER3_BASE (0xfffec700) -#define MPU_TIMER_FREE (1 << 6) -#define MPU_TIMER_CLOCK_ENABLE (1 << 5) -#define MPU_TIMER_AR (1 << 1) -#define MPU_TIMER_ST (1 << 0) - -/* - * ---------------------------------------------------------------------------- - * Clocks - * ---------------------------------------------------------------------------- - */ -#define CLKGEN_REG_BASE (0xfffece00) -#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) -#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) -#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) -#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) -#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) -#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) -#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) -#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) - -#define CK_RATEF 1 -#define CK_IDLEF 2 -#define CK_ENABLEF 4 -#define CK_SELECTF 8 -#define SETARM_IDLE_SHIFT - -/* DPLL control registers */ -#define DPLL_CTL (0xfffecf00) - -/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ -#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) -#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) -#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) -#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) -#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) - -/* - * --------------------------------------------------------------------------- - * UPLD - * --------------------------------------------------------------------------- - */ -#define ULPD_REG_BASE (0xfffe0800) -#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) -#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) -#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) -# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ -# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ -#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) -# define SOFT_UDC_REQ (1 << 4) -# define SOFT_USB_CLK_REQ (1 << 3) -# define SOFT_DPLL_REQ (1 << 0) -#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) -#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) -#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) -#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) -#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) -# define DIS_MMC2_DPLL_REQ (1 << 11) -# define DIS_MMC1_DPLL_REQ (1 << 10) -# define DIS_UART3_DPLL_REQ (1 << 9) -# define DIS_UART2_DPLL_REQ (1 << 8) -# define DIS_UART1_DPLL_REQ (1 << 7) -# define DIS_USB_HOST_DPLL_REQ (1 << 6) -#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) -#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) - -/* - * --------------------------------------------------------------------------- - * Watchdog timer - * --------------------------------------------------------------------------- - */ - -/* Watchdog timer within the OMAP3.2 gigacell */ -#define OMAP_MPU_WATCHDOG_BASE (0xfffec800) -#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) -#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) -#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) -#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) - -/* - * --------------------------------------------------------------------------- - * Interrupts - * --------------------------------------------------------------------------- - */ -#ifdef CONFIG_ARCH_OMAP1 - -/* - * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c - * or something similar.. -- PFM. - */ - -#define OMAP_IH1_BASE 0xfffecb00 -#define OMAP_IH2_BASE 0xfffe0000 - -#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) -#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) -#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) -#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) -#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) -#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) -#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) - -#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) -#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) -#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) -#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) -#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) -#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) -#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) - -#define IRQ_ITR_REG_OFFSET 0x00 -#define IRQ_MIR_REG_OFFSET 0x04 -#define IRQ_SIR_IRQ_REG_OFFSET 0x10 -#define IRQ_SIR_FIQ_REG_OFFSET 0x14 -#define IRQ_CONTROL_REG_OFFSET 0x18 -#define IRQ_ISR_REG_OFFSET 0x9c -#define IRQ_ILR0_REG_OFFSET 0x1c -#define IRQ_GMR_REG_OFFSET 0xa0 - -#endif - -/* - * ---------------------------------------------------------------------------- - * System control registers - * ---------------------------------------------------------------------------- - */ -#define MOD_CONF_CTRL_0 0xfffe1080 -#define MOD_CONF_CTRL_1 0xfffe1110 - -/* - * ---------------------------------------------------------------------------- - * Pin multiplexing registers - * ---------------------------------------------------------------------------- - */ -#define FUNC_MUX_CTRL_0 0xfffe1000 -#define FUNC_MUX_CTRL_1 0xfffe1004 -#define FUNC_MUX_CTRL_2 0xfffe1008 -#define COMP_MODE_CTRL_0 0xfffe100c -#define FUNC_MUX_CTRL_3 0xfffe1010 -#define FUNC_MUX_CTRL_4 0xfffe1014 -#define FUNC_MUX_CTRL_5 0xfffe1018 -#define FUNC_MUX_CTRL_6 0xfffe101C -#define FUNC_MUX_CTRL_7 0xfffe1020 -#define FUNC_MUX_CTRL_8 0xfffe1024 -#define FUNC_MUX_CTRL_9 0xfffe1028 -#define FUNC_MUX_CTRL_A 0xfffe102C -#define FUNC_MUX_CTRL_B 0xfffe1030 -#define FUNC_MUX_CTRL_C 0xfffe1034 -#define FUNC_MUX_CTRL_D 0xfffe1038 -#define PULL_DWN_CTRL_0 0xfffe1040 -#define PULL_DWN_CTRL_1 0xfffe1044 -#define PULL_DWN_CTRL_2 0xfffe1048 -#define PULL_DWN_CTRL_3 0xfffe104c -#define PULL_DWN_CTRL_4 0xfffe10ac - -/* OMAP-1610 specific multiplexing registers */ -#define FUNC_MUX_CTRL_E 0xfffe1090 -#define FUNC_MUX_CTRL_F 0xfffe1094 -#define FUNC_MUX_CTRL_10 0xfffe1098 -#define FUNC_MUX_CTRL_11 0xfffe109c -#define FUNC_MUX_CTRL_12 0xfffe10a0 -#define PU_PD_SEL_0 0xfffe10b4 -#define PU_PD_SEL_1 0xfffe10b8 -#define PU_PD_SEL_2 0xfffe10bc -#define PU_PD_SEL_3 0xfffe10c0 -#define PU_PD_SEL_4 0xfffe10c4 - -/* Timer32K for 1610 and 1710*/ -#define OMAP_TIMER32K_BASE 0xFFFBC400 - -/* - * --------------------------------------------------------------------------- - * TIPB bus interface - * --------------------------------------------------------------------------- - */ -#define TIPB_PUBLIC_CNTL_BASE 0xfffed300 -#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) -#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 -#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) - -/* - * ---------------------------------------------------------------------------- - * MPUI interface - * ---------------------------------------------------------------------------- - */ -#define MPUI_BASE (0xfffec900) -#define MPUI_CTRL (MPUI_BASE + 0x0) -#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) -#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) -#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) -#define MPUI_STATUS_REG (MPUI_BASE + 0x10) -#define MPUI_DSP_STATUS (MPUI_BASE + 0x14) -#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) -#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) - -/* - * ---------------------------------------------------------------------------- - * LED Pulse Generator - * ---------------------------------------------------------------------------- - */ -#define OMAP_LPG1_BASE 0xfffbd000 -#define OMAP_LPG2_BASE 0xfffbd800 -#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) -#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) -#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) -#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) - -/* - * ---------------------------------------------------------------------------- - * Pulse-Width Light - * ---------------------------------------------------------------------------- - */ -#define OMAP_PWL_BASE 0xfffb5800 -#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) -#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) - -/* - * --------------------------------------------------------------------------- - * Processor specific defines - * --------------------------------------------------------------------------- - */ - -#include <plat/omap7xx.h> -#include <plat/omap1510.h> -#include <plat/omap16xx.h> -#include <plat/omap24xx.h> -#include <plat/omap34xx.h> -#include <plat/omap44xx.h> -#include <plat/ti81xx.h> -#include <plat/am33xx.h> -#include <plat/omap54xx.h> - -#endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/plat/irqs-44xx.h b/arch/arm/plat-omap/include/plat/irqs-44xx.h deleted file mode 100644 index 518322c80116..000000000000 --- a/arch/arm/plat-omap/include/plat/irqs-44xx.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - * OMAP4 Interrupt lines definitions - * - * Copyright (C) 2009-2010 Texas Instruments, Inc. - * - * Santosh Shilimkar (santosh.shilimkar@ti.com) - * Benoit Cousson (b-cousson@ti.com) - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H -#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H - -/* OMAP44XX IRQs numbers definitions */ -#define OMAP44XX_IRQ_LOCALTIMER 29 -#define OMAP44XX_IRQ_LOCALWDT 30 - -#define OMAP44XX_IRQ_GIC_START 32 - -#define OMAP44XX_IRQ_PL310 (0 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CTI0 (1 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CTI1 (2 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_ELM (4 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SYS_1N (7 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SECURITY_EVENTS (8 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_L3_DBG (9 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_L3_APP (10 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_PRCM (11 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SDMA_0 (12 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SDMA_1 (13 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SDMA_2 (14 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SDMA_3 (15 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCBSP4 (16 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCBSP1 (17 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SR_MCU (18 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SR_CORE (19 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPMC (20 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GFX (21 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCBSP2 (22 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCBSP3 (23 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_ISS_5 (24 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DSS_DISPC (25 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MAIL_U0 (26 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_C2C_SSCM_0 (27 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_TESLA_MMU (28 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO1 (29 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO2 (30 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO3 (31 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO4 (32 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO5 (33 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO6 (34 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_USIM (35 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_WDT3 (36 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT1 (37 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT2 (38 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT3 (39 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT4 (40 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT5 (41 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT6 (42 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT7 (43 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT8 (44 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT9 (45 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT10 (46 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT11 (47 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SPI4 (48 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SHA1_S (49 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_FPKA_SINTREQUEST_S (50 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SHA1_P (51 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_RNG (52 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DSS_DSI1 (53 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_I2C1 (56 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_I2C2 (57 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HDQ (58 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC5 (59 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_I2C3 (61 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_I2C4 (62 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_AES2_S (63 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_AES2_P (64 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SPI1 (65 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SPI2 (66 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HSI_P1 (67 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HSI_P2 (68 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_FDIF_3 (69 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UART4 (70 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HSI_DMA (71 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UART1 (72 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UART2 (73 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UART3 (74 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_PBIAS (75 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_OHCI (76 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_EHCI (77 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_TLL (78 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_AES1_S (79 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_WDT2 (80 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DES_S (81 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DES_P (82 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC1 (83 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DSS_DSI2 (84 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_AES1_P (85 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC2 (86 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MPU_ICR (87 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_C2C_SSCM_1 (88 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_FSUSB (89 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_FSUSB_SMI (90 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SPI3 (91 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HS_USB_MC_N (92 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HS_USB_DMA_N (93 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC3 (94 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT12 (95 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC4 (96 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SLIMBUS1 (97 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SLIMBUS2 (98 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_ABE (99 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DUCATI_MMU (100 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DSS_HDMI (101 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SR_IVA (102 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_1 (103 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_0 (104 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_IVA_HD_POMBINTRPEND_0 (107 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCASP1_AR (108 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCASP1_AX (109 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_EMIF4_1 (110 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_EMIF4_2 (111 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCPDM (112 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DMM (113 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DMIC (114 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CDMA_0 (115 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CDMA_1 (116 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CDMA_2 (117 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CDMA_3 (118 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SYS_2N (119 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_KBD_CTL (120 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UNIPRO1 (124 + OMAP44XX_IRQ_GIC_START) - -#endif diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h deleted file mode 100644 index 37bbbbb981b2..000000000000 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ /dev/null @@ -1,453 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/irqs.h - * - * Copyright (C) Greg Lonnon 2001 - * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com> - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 - * are different. - */ - -#ifndef __ASM_ARCH_OMAP15XX_IRQS_H -#define __ASM_ARCH_OMAP15XX_IRQS_H - -/* All OMAP4 specific defines are moved to irqs-44xx.h */ -#include "irqs-44xx.h" - -/* - * IRQ numbers for interrupt handler 1 - * - * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below - * - */ -#define INT_CAMERA 1 -#define INT_FIQ 3 -#define INT_RTDX 6 -#define INT_DSP_MMU_ABORT 7 -#define INT_HOST 8 -#define INT_ABORT 9 -#define INT_BRIDGE_PRIV 13 -#define INT_GPIO_BANK1 14 -#define INT_UART3 15 -#define INT_TIMER3 16 -#define INT_DMA_CH0_6 19 -#define INT_DMA_CH1_7 20 -#define INT_DMA_CH2_8 21 -#define INT_DMA_CH3 22 -#define INT_DMA_CH4 23 -#define INT_DMA_CH5 24 -#define INT_DMA_LCD 25 -#define INT_TIMER1 26 -#define INT_WD_TIMER 27 -#define INT_BRIDGE_PUB 28 -#define INT_TIMER2 30 -#define INT_LCD_CTRL 31 - -/* - * OMAP-1510 specific IRQ numbers for interrupt handler 1 - */ -#define INT_1510_IH2_IRQ 0 -#define INT_1510_RES2 2 -#define INT_1510_SPI_TX 4 -#define INT_1510_SPI_RX 5 -#define INT_1510_DSP_MAILBOX1 10 -#define INT_1510_DSP_MAILBOX2 11 -#define INT_1510_RES12 12 -#define INT_1510_LB_MMU 17 -#define INT_1510_RES18 18 -#define INT_1510_LOCAL_BUS 29 - -/* - * OMAP-1610 specific IRQ numbers for interrupt handler 1 - */ -#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ -#define INT_1610_IH2_FIQ 2 -#define INT_1610_McBSP2_TX 4 -#define INT_1610_McBSP2_RX 5 -#define INT_1610_DSP_MAILBOX1 10 -#define INT_1610_DSP_MAILBOX2 11 -#define INT_1610_LCD_LINE 12 -#define INT_1610_GPTIMER1 17 -#define INT_1610_GPTIMER2 18 -#define INT_1610_SSR_FIFO_0 29 - -/* - * OMAP-7xx specific IRQ numbers for interrupt handler 1 - */ -#define INT_7XX_IH2_FIQ 0 -#define INT_7XX_IH2_IRQ 1 -#define INT_7XX_USB_NON_ISO 2 -#define INT_7XX_USB_ISO 3 -#define INT_7XX_ICR 4 -#define INT_7XX_EAC 5 -#define INT_7XX_GPIO_BANK1 6 -#define INT_7XX_GPIO_BANK2 7 -#define INT_7XX_GPIO_BANK3 8 -#define INT_7XX_McBSP2TX 10 -#define INT_7XX_McBSP2RX 11 -#define INT_7XX_McBSP2RX_OVF 12 -#define INT_7XX_LCD_LINE 14 -#define INT_7XX_GSM_PROTECT 15 -#define INT_7XX_TIMER3 16 -#define INT_7XX_GPIO_BANK5 17 -#define INT_7XX_GPIO_BANK6 18 -#define INT_7XX_SPGIO_WR 29 - -/* - * IRQ numbers for interrupt handler 2 - * - * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below - */ -#define IH2_BASE 32 - -#define INT_KEYBOARD (1 + IH2_BASE) -#define INT_uWireTX (2 + IH2_BASE) -#define INT_uWireRX (3 + IH2_BASE) -#define INT_I2C (4 + IH2_BASE) -#define INT_MPUIO (5 + IH2_BASE) -#define INT_USB_HHC_1 (6 + IH2_BASE) -#define INT_McBSP3TX (10 + IH2_BASE) -#define INT_McBSP3RX (11 + IH2_BASE) -#define INT_McBSP1TX (12 + IH2_BASE) -#define INT_McBSP1RX (13 + IH2_BASE) -#define INT_UART1 (14 + IH2_BASE) -#define INT_UART2 (15 + IH2_BASE) -#define INT_BT_MCSI1TX (16 + IH2_BASE) -#define INT_BT_MCSI1RX (17 + IH2_BASE) -#define INT_SOSSI_MATCH (19 + IH2_BASE) -#define INT_USB_W2FC (20 + IH2_BASE) -#define INT_1WIRE (21 + IH2_BASE) -#define INT_OS_TIMER (22 + IH2_BASE) -#define INT_MMC (23 + IH2_BASE) -#define INT_GAUGE_32K (24 + IH2_BASE) -#define INT_RTC_TIMER (25 + IH2_BASE) -#define INT_RTC_ALARM (26 + IH2_BASE) -#define INT_MEM_STICK (27 + IH2_BASE) - -/* - * OMAP-1510 specific IRQ numbers for interrupt handler 2 - */ -#define INT_1510_DSP_MMU (28 + IH2_BASE) -#define INT_1510_COM_SPI_RO (31 + IH2_BASE) - -/* - * OMAP-1610 specific IRQ numbers for interrupt handler 2 - */ -#define INT_1610_FAC (0 + IH2_BASE) -#define INT_1610_USB_HHC_2 (7 + IH2_BASE) -#define INT_1610_USB_OTG (8 + IH2_BASE) -#define INT_1610_SoSSI (9 + IH2_BASE) -#define INT_1610_SoSSI_MATCH (19 + IH2_BASE) -#define INT_1610_DSP_MMU (28 + IH2_BASE) -#define INT_1610_McBSP2RX_OF (31 + IH2_BASE) -#define INT_1610_STI (32 + IH2_BASE) -#define INT_1610_STI_WAKEUP (33 + IH2_BASE) -#define INT_1610_GPTIMER3 (34 + IH2_BASE) -#define INT_1610_GPTIMER4 (35 + IH2_BASE) -#define INT_1610_GPTIMER5 (36 + IH2_BASE) -#define INT_1610_GPTIMER6 (37 + IH2_BASE) -#define INT_1610_GPTIMER7 (38 + IH2_BASE) -#define INT_1610_GPTIMER8 (39 + IH2_BASE) -#define INT_1610_GPIO_BANK2 (40 + IH2_BASE) -#define INT_1610_GPIO_BANK3 (41 + IH2_BASE) -#define INT_1610_MMC2 (42 + IH2_BASE) -#define INT_1610_CF (43 + IH2_BASE) -#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_1610_GPIO_BANK4 (48 + IH2_BASE) -#define INT_1610_SPI (49 + IH2_BASE) -#define INT_1610_DMA_CH6 (53 + IH2_BASE) -#define INT_1610_DMA_CH7 (54 + IH2_BASE) -#define INT_1610_DMA_CH8 (55 + IH2_BASE) -#define INT_1610_DMA_CH9 (56 + IH2_BASE) -#define INT_1610_DMA_CH10 (57 + IH2_BASE) -#define INT_1610_DMA_CH11 (58 + IH2_BASE) -#define INT_1610_DMA_CH12 (59 + IH2_BASE) -#define INT_1610_DMA_CH13 (60 + IH2_BASE) -#define INT_1610_DMA_CH14 (61 + IH2_BASE) -#define INT_1610_DMA_CH15 (62 + IH2_BASE) -#define INT_1610_NAND (63 + IH2_BASE) -#define INT_1610_SHA1MD5 (91 + IH2_BASE) - -/* - * OMAP-7xx specific IRQ numbers for interrupt handler 2 - */ -#define INT_7XX_HW_ERRORS (0 + IH2_BASE) -#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE) -#define INT_7XX_CFCD (2 + IH2_BASE) -#define INT_7XX_CFIREQ (3 + IH2_BASE) -#define INT_7XX_I2C (4 + IH2_BASE) -#define INT_7XX_PCC (5 + IH2_BASE) -#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE) -#define INT_7XX_SPI_100K_1 (7 + IH2_BASE) -#define INT_7XX_SYREN_SPI (8 + IH2_BASE) -#define INT_7XX_VLYNQ (9 + IH2_BASE) -#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE) -#define INT_7XX_McBSP1TX (11 + IH2_BASE) -#define INT_7XX_McBSP1RX (12 + IH2_BASE) -#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE) -#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE) -#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE) -#define INT_7XX_MCSI (16 + IH2_BASE) -#define INT_7XX_uWireTX (17 + IH2_BASE) -#define INT_7XX_uWireRX (18 + IH2_BASE) -#define INT_7XX_SMC_CD (19 + IH2_BASE) -#define INT_7XX_SMC_IREQ (20 + IH2_BASE) -#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE) -#define INT_7XX_TIMER32K (22 + IH2_BASE) -#define INT_7XX_MMC_SDIO (23 + IH2_BASE) -#define INT_7XX_UPLD (24 + IH2_BASE) -#define INT_7XX_USB_HHC_1 (27 + IH2_BASE) -#define INT_7XX_USB_HHC_2 (28 + IH2_BASE) -#define INT_7XX_USB_GENI (29 + IH2_BASE) -#define INT_7XX_USB_OTG (30 + IH2_BASE) -#define INT_7XX_CAMERA_IF (31 + IH2_BASE) -#define INT_7XX_RNG (32 + IH2_BASE) -#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE) -#define INT_7XX_DBB_RF_EN (34 + IH2_BASE) -#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE) -#define INT_7XX_SHA1_MD5 (36 + IH2_BASE) -#define INT_7XX_SPI_100K_2 (37 + IH2_BASE) -#define INT_7XX_RNG_IDLE (38 + IH2_BASE) -#define INT_7XX_MPUIO (39 + IH2_BASE) -#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) -#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE) -#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE) -#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE) -#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_7XX_DMA_CH6 (53 + IH2_BASE) -#define INT_7XX_DMA_CH7 (54 + IH2_BASE) -#define INT_7XX_DMA_CH8 (55 + IH2_BASE) -#define INT_7XX_DMA_CH9 (56 + IH2_BASE) -#define INT_7XX_DMA_CH10 (57 + IH2_BASE) -#define INT_7XX_DMA_CH11 (58 + IH2_BASE) -#define INT_7XX_DMA_CH12 (59 + IH2_BASE) -#define INT_7XX_DMA_CH13 (60 + IH2_BASE) -#define INT_7XX_DMA_CH14 (61 + IH2_BASE) -#define INT_7XX_DMA_CH15 (62 + IH2_BASE) -#define INT_7XX_NAND (63 + IH2_BASE) - -#define INT_24XX_SYS_NIRQ 7 -#define INT_24XX_SDMA_IRQ0 12 -#define INT_24XX_SDMA_IRQ1 13 -#define INT_24XX_SDMA_IRQ2 14 -#define INT_24XX_SDMA_IRQ3 15 -#define INT_24XX_CAM_IRQ 24 -#define INT_24XX_DSS_IRQ 25 -#define INT_24XX_MAIL_U0_MPU 26 -#define INT_24XX_DSP_UMA 27 -#define INT_24XX_DSP_MMU 28 -#define INT_24XX_GPIO_BANK1 29 -#define INT_24XX_GPIO_BANK2 30 -#define INT_24XX_GPIO_BANK3 31 -#define INT_24XX_GPIO_BANK4 32 -#define INT_24XX_GPIO_BANK5 33 -#define INT_24XX_MAIL_U3_MPU 34 -#define INT_24XX_GPTIMER1 37 -#define INT_24XX_GPTIMER2 38 -#define INT_24XX_GPTIMER3 39 -#define INT_24XX_GPTIMER4 40 -#define INT_24XX_GPTIMER5 41 -#define INT_24XX_GPTIMER6 42 -#define INT_24XX_GPTIMER7 43 -#define INT_24XX_GPTIMER8 44 -#define INT_24XX_GPTIMER9 45 -#define INT_24XX_GPTIMER10 46 -#define INT_24XX_GPTIMER11 47 -#define INT_24XX_GPTIMER12 48 -#define INT_24XX_SHA1MD5 51 -#define INT_24XX_MCBSP4_IRQ_TX 54 -#define INT_24XX_MCBSP4_IRQ_RX 55 -#define INT_24XX_I2C1_IRQ 56 -#define INT_24XX_I2C2_IRQ 57 -#define INT_24XX_HDQ_IRQ 58 -#define INT_24XX_MCBSP1_IRQ_TX 59 -#define INT_24XX_MCBSP1_IRQ_RX 60 -#define INT_24XX_MCBSP2_IRQ_TX 62 -#define INT_24XX_MCBSP2_IRQ_RX 63 -#define INT_24XX_SPI1_IRQ 65 -#define INT_24XX_SPI2_IRQ 66 -#define INT_24XX_UART1_IRQ 72 -#define INT_24XX_UART2_IRQ 73 -#define INT_24XX_UART3_IRQ 74 -#define INT_24XX_USB_IRQ_GEN 75 -#define INT_24XX_USB_IRQ_NISO 76 -#define INT_24XX_USB_IRQ_ISO 77 -#define INT_24XX_USB_IRQ_HGEN 78 -#define INT_24XX_USB_IRQ_HSOF 79 -#define INT_24XX_USB_IRQ_OTG 80 -#define INT_24XX_MCBSP5_IRQ_TX 81 -#define INT_24XX_MCBSP5_IRQ_RX 82 -#define INT_24XX_MMC_IRQ 83 -#define INT_24XX_MMC2_IRQ 86 -#define INT_24XX_MCBSP3_IRQ_TX 89 -#define INT_24XX_MCBSP3_IRQ_RX 90 -#define INT_24XX_SPI3_IRQ 91 - -#define INT_243X_MCBSP2_IRQ 16 -#define INT_243X_MCBSP3_IRQ 17 -#define INT_243X_MCBSP4_IRQ 18 -#define INT_243X_MCBSP5_IRQ 19 -#define INT_243X_MCBSP1_IRQ 64 -#define INT_243X_HS_USB_MC 92 -#define INT_243X_HS_USB_DMA 93 -#define INT_243X_CARKIT_IRQ 94 - -#define INT_34XX_BENCH_MPU_EMUL 3 -#define INT_34XX_ST_MCBSP2_IRQ 4 -#define INT_34XX_ST_MCBSP3_IRQ 5 -#define INT_34XX_SSM_ABORT_IRQ 6 -#define INT_34XX_SYS_NIRQ 7 -#define INT_34XX_D2D_FW_IRQ 8 -#define INT_34XX_L3_DBG_IRQ 9 -#define INT_34XX_L3_APP_IRQ 10 -#define INT_34XX_PRCM_MPU_IRQ 11 -#define INT_34XX_MCBSP1_IRQ 16 -#define INT_34XX_MCBSP2_IRQ 17 -#define INT_34XX_GPMC_IRQ 20 -#define INT_34XX_MCBSP3_IRQ 22 -#define INT_34XX_MCBSP4_IRQ 23 -#define INT_34XX_CAM_IRQ 24 -#define INT_34XX_MCBSP5_IRQ 27 -#define INT_34XX_GPIO_BANK1 29 -#define INT_34XX_GPIO_BANK2 30 -#define INT_34XX_GPIO_BANK3 31 -#define INT_34XX_GPIO_BANK4 32 -#define INT_34XX_GPIO_BANK5 33 -#define INT_34XX_GPIO_BANK6 34 -#define INT_34XX_USIM_IRQ 35 -#define INT_34XX_WDT3_IRQ 36 -#define INT_34XX_SPI4_IRQ 48 -#define INT_34XX_SHA1MD52_IRQ 49 -#define INT_34XX_FPKA_READY_IRQ 50 -#define INT_34XX_SHA1MD51_IRQ 51 -#define INT_34XX_RNG_IRQ 52 -#define INT_34XX_I2C3_IRQ 61 -#define INT_34XX_FPKA_ERROR_IRQ 64 -#define INT_34XX_PBIAS_IRQ 75 -#define INT_34XX_OHCI_IRQ 76 -#define INT_34XX_EHCI_IRQ 77 -#define INT_34XX_TLL_IRQ 78 -#define INT_34XX_PARTHASH_IRQ 79 -#define INT_34XX_MMC3_IRQ 94 -#define INT_34XX_GPT12_IRQ 95 - -#define INT_36XX_UART4_IRQ 80 - -#define INT_35XX_HECC0_IRQ 24 -#define INT_35XX_HECC1_IRQ 28 -#define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67 -#define INT_35XX_EMAC_C0_RX_PULSE_IRQ 68 -#define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69 -#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70 -#define INT_35XX_USBOTG_IRQ 71 -#define INT_35XX_UART4_IRQ 84 -#define INT_35XX_CCDC_VD0_IRQ 88 -#define INT_35XX_CCDC_VD1_IRQ 92 -#define INT_35XX_CCDC_VD2_IRQ 93 - -/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and - * 16 MPUIO lines */ -#define OMAP_MAX_GPIO_LINES 192 -#define IH_GPIO_BASE (128 + IH2_BASE) -#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) -#define OMAP_IRQ_END (IH_MPUIO_BASE + 16) - -/* External FPGA handles interrupts on Innovator boards */ -#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END) -#ifdef CONFIG_MACH_OMAP_INNOVATOR -#define OMAP_FPGA_NR_IRQS 24 -#else -#define OMAP_FPGA_NR_IRQS 0 -#endif -#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) - -/* External TWL4030 can handle interrupts on 2430 and 34xx boards */ -#define TWL4030_IRQ_BASE (OMAP_FPGA_IRQ_END) -#ifdef CONFIG_TWL4030_CORE -#define TWL4030_BASE_NR_IRQS 8 -#define TWL4030_PWR_NR_IRQS 8 -#else -#define TWL4030_BASE_NR_IRQS 0 -#define TWL4030_PWR_NR_IRQS 0 -#endif -#define TWL4030_IRQ_END (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS) -#define TWL4030_PWR_IRQ_BASE TWL4030_IRQ_END -#define TWL4030_PWR_IRQ_END (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS) - -/* External TWL4030 gpio interrupts are optional */ -#define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END -#ifdef CONFIG_GPIO_TWL4030 -#define TWL4030_GPIO_NR_IRQS 18 -#else -#define TWL4030_GPIO_NR_IRQS 0 -#endif -#define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS) - -#define TWL6030_IRQ_BASE (OMAP_FPGA_IRQ_END) -#ifdef CONFIG_TWL4030_CORE -#define TWL6030_BASE_NR_IRQS 20 -#else -#define TWL6030_BASE_NR_IRQS 0 -#endif -#define TWL6030_IRQ_END (TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS) - -#define TWL6040_CODEC_IRQ_BASE TWL6030_IRQ_END -#ifdef CONFIG_TWL6040_CODEC -#define TWL6040_CODEC_NR_IRQS 6 -#else -#define TWL6040_CODEC_NR_IRQS 0 -#endif -#define TWL6040_CODEC_IRQ_END (TWL6040_CODEC_IRQ_BASE + TWL6040_CODEC_NR_IRQS) - -/* Total number of interrupts depends on the enabled blocks above */ -#if (TWL4030_GPIO_IRQ_END > TWL6040_CODEC_IRQ_END) -#define TWL_IRQ_END TWL4030_GPIO_IRQ_END -#else -#define TWL_IRQ_END TWL6040_CODEC_IRQ_END -#endif - -/* GPMC related */ -#define OMAP_GPMC_IRQ_BASE (TWL_IRQ_END) -#define OMAP_GPMC_NR_IRQS 8 -#define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS) - -/* PRCM IRQ handler */ -#ifdef CONFIG_ARCH_OMAP2PLUS -#define OMAP_PRCM_IRQ_BASE (OMAP_GPMC_IRQ_END) -#define OMAP_PRCM_NR_IRQS 64 -#define OMAP_PRCM_IRQ_END (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS) -#else -#define OMAP_PRCM_IRQ_END OMAP_GPMC_IRQ_END -#endif - -#define NR_IRQS OMAP_PRCM_IRQ_END - -#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) - -#define INTCPS_NR_MIR_REGS 3 -#define INTCPS_NR_IRQS 96 - -#include <mach/hardware.h> - -#ifdef CONFIG_FIQ -#define FIQ_START 1024 -#endif - -#endif diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index eb3e4d555343..8b4e4f2da2f5 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -15,7 +15,6 @@ #include <linux/device.h> #include <linux/mmc/host.h> -#include <plat/board.h> #include <plat/omap_hwmod.h> #define OMAP15XX_NR_MMC 1 diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h index 67fc5060183e..1a68c1e5fe53 100644 --- a/arch/arm/plat-omap/include/plat/nand.h +++ b/arch/arm/plat-omap/include/plat/nand.h @@ -24,11 +24,10 @@ struct omap_nand_platform_data { struct gpmc_timings *gpmc_t; int nr_parts; bool dev_ready; - int gpmc_irq; enum nand_io xfer_type; - unsigned long phys_base; int devsize; enum omap_ecc ecc_opt; + struct gpmc_nand_regs reg; }; /* minimum size for IO mapping */ diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 1a52725ffcf2..a531149823bb 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -18,7 +18,7 @@ #define __OMAP_SERIAL_H__ #include <linux/serial_core.h> -#include <linux/platform_device.h> +#include <linux/device.h> #include <linux/pm_qos.h> #include <plat/mux.h> @@ -42,10 +42,10 @@ #define OMAP_UART_WER_MOD_WKUP 0X7F /* Enable XON/XOFF flow control on output */ -#define OMAP_UART_SW_TX 0x04 +#define OMAP_UART_SW_TX 0x8 /* Enable XON/XOFF flow control on input */ -#define OMAP_UART_SW_RX 0x04 +#define OMAP_UART_SW_RX 0x2 #define OMAP_UART_SYSC_RESET 0X07 #define OMAP_UART_TCR_TRIG 0X0F @@ -69,11 +69,14 @@ struct omap_uart_port_info { unsigned int dma_rx_timeout; unsigned int autosuspend_timeout; unsigned int dma_rx_poll_rate; + int DTR_gpio; + int DTR_inverted; + int DTR_present; int (*get_context_loss_count)(struct device *); - void (*set_forceidle)(struct platform_device *); - void (*set_noidle)(struct platform_device *); - void (*enable_wakeup)(struct platform_device *, bool); + void (*set_forceidle)(struct device *); + void (*set_noidle)(struct device *); + void (*enable_wakeup)(struct device *, bool); }; struct uart_omap_dma { @@ -102,39 +105,4 @@ struct uart_omap_dma { unsigned int rx_timeout; }; -struct uart_omap_port { - struct uart_port port; - struct uart_omap_dma uart_dma; - struct platform_device *pdev; - - unsigned char ier; - unsigned char lcr; - unsigned char mcr; - unsigned char fcr; - unsigned char efr; - unsigned char dll; - unsigned char dlh; - unsigned char mdr1; - unsigned char scr; - - int use_dma; - /* - * Some bits in registers are cleared on a read, so they must - * be saved whenever the register is read but the bits will not - * be immediately processed. - */ - unsigned int lsr_break_flag; - unsigned char msr_saved_flags; - char name[20]; - unsigned long port_activity; - u32 context_loss_cnt; - u32 errata; - u8 wakeups_enabled; - - struct pm_qos_request pm_qos_request; - u32 latency; - u32 calc_latency; - struct work_struct qos_work; -}; - #endif /* __OMAP_SERIAL_H__ */ diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h index 8ad0a377a54b..20de0d5a7e77 100644 --- a/arch/arm/plat-omap/include/plat/omap4-keypad.h +++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h @@ -1,6 +1,8 @@ #ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H #define ARCH_ARM_PLAT_OMAP4_KEYPAD_H +struct omap_board_data; + extern int omap4_keyboard_init(struct omap4_keypad_platform_data *, struct omap_board_data *); #endif diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 6132972aff37..5857b9cd6eb9 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -615,6 +615,7 @@ int omap_hwmod_softreset(struct omap_hwmod *oh); int omap_hwmod_count_resources(struct omap_hwmod *oh); int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); +int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res); int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, const char *name, struct resource *res); diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 548a4c8d63df..bd20588c356b 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -5,7 +5,6 @@ #include <linux/io.h> #include <linux/usb/musb.h> -#include <plat/board.h> #define OMAP3_HS_USB_PORTS 3 diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index c490240bb82c..6f5c58096819 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -370,6 +370,14 @@ static int omap_device_build_from_dt(struct platform_device *pdev) goto odbfd_exit1; } + /* Fix up missing resource names */ + for (i = 0; i < pdev->num_resources; i++) { + struct resource *r = &pdev->resource[i]; + + if (r->name == NULL) + r->name = dev_name(&pdev->dev); + } + if (of_get_property(node, "ti,no_idle_on_suspend", NULL)) omap_device_disable_idle_on_suspend(pdev); @@ -486,6 +494,33 @@ static int omap_device_fill_resources(struct omap_device *od, } /** + * _od_fill_dma_resources - fill in array of struct resource with dma resources + * @od: struct omap_device * + * @res: pointer to an array of struct resource to be filled in + * + * Populate one or more empty struct resource pointed to by @res with + * the dma resource data for this omap_device @od. Used by + * omap_device_alloc() after calling omap_device_count_resources(). + * + * Ideally this function would not be needed at all. If we have + * mechanism to get dma resources from DT. + * + * Returns 0. + */ +static int _od_fill_dma_resources(struct omap_device *od, + struct resource *res) +{ + int i, r; + + for (i = 0; i < od->hwmods_cnt; i++) { + r = omap_hwmod_fill_dma_resources(od->hwmods[i], res); + res += r; + } + + return 0; +} + +/** * omap_device_alloc - allocate an omap_device * @pdev: platform_device that will be included in this omap_device * @oh: ptr to the single omap_hwmod that backs this omap_device @@ -524,24 +559,44 @@ struct omap_device *omap_device_alloc(struct platform_device *pdev, od->hwmods = hwmods; od->pdev = pdev; + res_count = omap_device_count_resources(od); /* - * HACK: Ideally the resources from DT should match, and hwmod - * should just add the missing ones. Since the name is not - * properly populated by DT, stick to hwmod resources only. + * DT Boot: + * OF framework will construct the resource structure (currently + * does for MEM & IRQ resource) and we should respect/use these + * resources, killing hwmod dependency. + * If pdev->num_resources > 0, we assume that MEM & IRQ resources + * have been allocated by OF layer already (through DTB). + * + * Non-DT Boot: + * Here, pdev->num_resources = 0, and we should get all the + * resources from hwmod. + * + * TODO: Once DMA resource is available from OF layer, we should + * kill filling any resources from hwmod. */ - if (pdev->num_resources && pdev->resource) - dev_warn(&pdev->dev, "%s(): resources already allocated %d\n", - __func__, pdev->num_resources); - - res_count = omap_device_count_resources(od); - if (res_count > 0) { - dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n", - __func__, res_count); + if (res_count > pdev->num_resources) { + /* Allocate resources memory to account for new resources */ res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL); if (!res) goto oda_exit3; - omap_device_fill_resources(od, res); + /* + * If pdev->num_resources > 0, then assume that, + * MEM and IRQ resources will only come from DT and only + * fill DMA resource from hwmod layer. + */ + if (pdev->num_resources && pdev->resource) { + dev_dbg(&pdev->dev, "%s(): resources already allocated %d\n", + __func__, res_count); + memcpy(res, pdev->resource, + sizeof(struct resource) * pdev->num_resources); + _od_fill_dma_resources(od, &res[pdev->num_resources]); + } else { + dev_dbg(&pdev->dev, "%s(): using resources from hwmod %d\n", + __func__, res_count); + omap_device_fill_resources(od, res); + } ret = platform_device_add_resources(pdev, res, res_count); kfree(res); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 766181cb5c95..d861aa73299d 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -26,7 +26,6 @@ #include <asm/mach/map.h> #include <plat/sram.h> -#include <plat/board.h> #include <plat/cpu.h> #include "sram.h" diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index c34785dca92b..ec536e4e36c9 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -338,7 +338,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { /* Handle turning off CRTSCTS */ if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { + !(tty->termios.c_cflag & CRTSCTS)) { tty->hw_stopped = 0; } } @@ -545,6 +545,7 @@ static int __init simrs_init(void) /* the port is imaginary */ printk(KERN_INFO "ttyS0 at 0x03f8 (irq = %d) is a 16550\n", state->irq); + tty_port_link_device(&state->port, hp_simserial_driver, 0); retval = tty_register_driver(hp_simserial_driver); if (retval) { printk(KERN_ERR "Couldn't register simserial driver\n"); diff --git a/arch/m68k/emu/nfcon.c b/arch/m68k/emu/nfcon.c index 8db25e806947..16d170f53bfd 100644 --- a/arch/m68k/emu/nfcon.c +++ b/arch/m68k/emu/nfcon.c @@ -19,6 +19,7 @@ #include <asm/natfeat.h> static int stderr_id; +static struct tty_port nfcon_tty_port; static struct tty_driver *nfcon_tty_driver; static void nfputs(const char *str, unsigned int count) @@ -119,6 +120,8 @@ static int __init nfcon_init(void) { int res; + tty_port_init(&nfcon_tty_port); + stderr_id = nf_get_id("NF_STDERR"); if (!stderr_id) return -ENODEV; @@ -135,6 +138,7 @@ static int __init nfcon_init(void) nfcon_tty_driver->flags = TTY_DRIVER_REAL_RAW; tty_set_operations(nfcon_tty_driver, &nfcon_tty_ops); + tty_port_link_device(&nfcon_tty_port, nfcon_tty_driver, 0); res = tty_register_driver(nfcon_tty_driver); if (res) { pr_err("failed to register nfcon tty driver\n"); diff --git a/arch/mips/cavium-octeon/serial.c b/arch/mips/cavium-octeon/serial.c index 138b2216b4f8..569f41bdcc46 100644 --- a/arch/mips/cavium-octeon/serial.c +++ b/arch/mips/cavium-octeon/serial.c @@ -47,40 +47,40 @@ static int __devinit octeon_serial_probe(struct platform_device *pdev) { int irq, res; struct resource *res_mem; - struct uart_port port; + struct uart_8250_port up; /* All adaptors have an irq. */ irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; - memset(&port, 0, sizeof(port)); + memset(&up, 0, sizeof(up)); - port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE; - port.type = PORT_OCTEON; - port.iotype = UPIO_MEM; - port.regshift = 3; - port.dev = &pdev->dev; + up.port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE; + up.port.type = PORT_OCTEON; + up.port.iotype = UPIO_MEM; + up.port.regshift = 3; + up.port.dev = &pdev->dev; if (octeon_is_simulation()) /* Make simulator output fast*/ - port.uartclk = 115200 * 16; + up.port.uartclk = 115200 * 16; else - port.uartclk = octeon_get_io_clock_rate(); + up.port.uartclk = octeon_get_io_clock_rate(); - port.serial_in = octeon_serial_in; - port.serial_out = octeon_serial_out; - port.irq = irq; + up.port.serial_in = octeon_serial_in; + up.port.serial_out = octeon_serial_out; + up.port.irq = irq; res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res_mem == NULL) { dev_err(&pdev->dev, "found no memory resource\n"); return -ENXIO; } - port.mapbase = res_mem->start; - port.membase = ioremap(res_mem->start, resource_size(res_mem)); + up.port.mapbase = res_mem->start; + up.port.membase = ioremap(res_mem->start, resource_size(res_mem)); - res = serial8250_register_port(&port); + res = serial8250_register_8250_port(&up); return res >= 0 ? 0 : res; } diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c index c48194c3073b..b2d4f492d782 100644 --- a/arch/mips/sni/a20r.c +++ b/arch/mips/sni/a20r.c @@ -133,6 +133,38 @@ static struct platform_device sc26xx_pdev = { } }; +#warning "Please try migrate to use new driver SCCNXP and report the status" \ + "in the linux-serial mailing list." + +/* The code bellow is a replacement of SC26XX to SCCNXP */ +#if 0 +#include <linux/platform_data/sccnxp.h> + +static struct sccnxp_pdata sccnxp_data = { + .reg_shift = 2, + .frequency = 3686400, + .mctrl_cfg[0] = MCTRL_SIG(DTR_OP, LINE_OP7) | + MCTRL_SIG(RTS_OP, LINE_OP3) | + MCTRL_SIG(DSR_IP, LINE_IP5) | + MCTRL_SIG(DCD_IP, LINE_IP6), + .mctrl_cfg[1] = MCTRL_SIG(DTR_OP, LINE_OP2) | + MCTRL_SIG(RTS_OP, LINE_OP1) | + MCTRL_SIG(DSR_IP, LINE_IP0) | + MCTRL_SIG(CTS_IP, LINE_IP1) | + MCTRL_SIG(DCD_IP, LINE_IP2) | + MCTRL_SIG(RNG_IP, LINE_IP3), +}; + +static struct platform_device sc2681_pdev = { + .name = "sc2681", + .resource = sc2xxx_rsrc, + .num_resources = ARRAY_SIZE(sc2xxx_rsrc), + .dev = { + .platform_data = &sccnxp_data, + }, +}; +#endif + static u32 a20r_ack_hwint(void) { u32 status = read_c0_status(); diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c index 47341aa208f2..88238638aee6 100644 --- a/arch/parisc/kernel/pdc_cons.c +++ b/arch/parisc/kernel/pdc_cons.c @@ -202,6 +202,7 @@ static int __init pdc_console_tty_driver_init(void) pdc_console_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS; tty_set_operations(pdc_console_tty_driver, &pdc_console_tty_ops); + tty_port_link_device(&tty_port, pdc_console_tty_driver, 0); err = tty_register_driver(pdc_console_tty_driver); if (err) { diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 53b6dfa83344..54b73a28c205 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -386,6 +386,7 @@ extern unsigned long cpuidle_disable; enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF}; extern int powersave_nap; /* set if nap mode can be used in idle loop */ +extern void power7_nap(void); #ifdef CONFIG_PSERIES_IDLE extern void update_smt_snooze_delay(int snooze); diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 85b05c463fae..e8995727b1c1 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -76,6 +76,7 @@ int main(void) DEFINE(SIGSEGV, SIGSEGV); DEFINE(NMI_MASK, NMI_MASK); DEFINE(THREAD_DSCR, offsetof(struct thread_struct, dscr)); + DEFINE(THREAD_DSCR_INHERIT, offsetof(struct thread_struct, dscr_inherit)); #else DEFINE(THREAD_INFO, offsetof(struct task_struct, stack)); #endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c index 5b25c8060fd6..a892680668d8 100644 --- a/arch/powerpc/kernel/dbell.c +++ b/arch/powerpc/kernel/dbell.c @@ -28,6 +28,8 @@ void doorbell_setup_this_cpu(void) void doorbell_cause_ipi(int cpu, unsigned long data) { + /* Order previous accesses vs. msgsnd, which is treated as a store */ + mb(); ppc_msgsnd(PPC_DBELL, 0, data); } diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 4b01a25e29ef..b40e0b4815b3 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -370,6 +370,12 @@ _GLOBAL(ret_from_fork) li r3,0 b syscall_exit + .section ".toc","aw" +DSCR_DEFAULT: + .tc dscr_default[TC],dscr_default + + .section ".text" + /* * This routine switches between two different tasks. The process * state of one is saved on its kernel stack. Then the state @@ -509,9 +515,6 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) mr r1,r8 /* start using new stack pointer */ std r7,PACAKSAVE(r13) - ld r6,_CCR(r1) - mtcrf 0xFF,r6 - #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION ld r0,THREAD_VRSAVE(r4) @@ -520,14 +523,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif /* CONFIG_ALTIVEC */ #ifdef CONFIG_PPC64 BEGIN_FTR_SECTION + lwz r6,THREAD_DSCR_INHERIT(r4) + ld r7,DSCR_DEFAULT@toc(2) ld r0,THREAD_DSCR(r4) - cmpd r0,r25 - beq 1f + cmpwi r6,0 + bne 1f + ld r0,0(r7) +1: cmpd r0,r25 + beq 2f mtspr SPRN_DSCR,r0 -1: +2: END_FTR_SECTION_IFSET(CPU_FTR_DSCR) #endif + ld r6,_CCR(r1) + mtcrf 0xFF,r6 + /* r3-r13 are destroyed -- Cort */ REST_8GPRS(14, r1) REST_10GPRS(22, r1) diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index e894515e77bb..39aa97d3ff88 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -186,7 +186,7 @@ hardware_interrupt_hv: KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x800) MASKABLE_EXCEPTION_PSERIES(0x900, 0x900, decrementer) - MASKABLE_EXCEPTION_HV(0x980, 0x982, decrementer) + STD_EXCEPTION_HV(0x980, 0x982, hdecrementer) STD_EXCEPTION_PSERIES(0xa00, 0xa00, trap_0a) KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xa00) @@ -486,6 +486,7 @@ machine_check_common: STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ) STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt) + STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt) STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception) STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S index 7140d838339e..e11863f4e595 100644 --- a/arch/powerpc/kernel/idle_power7.S +++ b/arch/powerpc/kernel/idle_power7.S @@ -28,7 +28,9 @@ _GLOBAL(power7_idle) lwz r4,ADDROFF(powersave_nap)(r3) cmpwi 0,r4,0 beqlr + /* fall through */ +_GLOBAL(power7_nap) /* NAP is a state loss, we create a regs frame on the * stack, fill it up with the state we care about and * stick a pointer to it in PACAR1. We really only diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 710f400476de..1a1f2ddfb581 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -802,16 +802,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, #endif /* CONFIG_PPC_STD_MMU_64 */ #ifdef CONFIG_PPC64 if (cpu_has_feature(CPU_FTR_DSCR)) { - if (current->thread.dscr_inherit) { - p->thread.dscr_inherit = 1; - p->thread.dscr = current->thread.dscr; - } else if (0 != dscr_default) { - p->thread.dscr_inherit = 1; - p->thread.dscr = dscr_default; - } else { - p->thread.dscr_inherit = 0; - p->thread.dscr = 0; - } + p->thread.dscr_inherit = current->thread.dscr_inherit; + p->thread.dscr = current->thread.dscr; } #endif diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 0321007086f7..8d4214afc21d 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -198,8 +198,15 @@ void smp_muxed_ipi_message_pass(int cpu, int msg) struct cpu_messages *info = &per_cpu(ipi_message, cpu); char *message = (char *)&info->messages; + /* + * Order previous accesses before accesses in the IPI handler. + */ + smp_mb(); message[msg] = 1; - mb(); + /* + * cause_ipi functions are required to include a full barrier + * before doing whatever causes the IPI. + */ smp_ops->cause_ipi(cpu, info->data); } @@ -211,7 +218,7 @@ irqreturn_t smp_ipi_demux(void) mb(); /* order any irq clear */ do { - all = xchg_local(&info->messages, 0); + all = xchg(&info->messages, 0); #ifdef __BIG_ENDIAN if (all & (1 << (24 - 8 * PPC_MSG_CALL_FUNCTION))) diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 3529446c2abd..8302af649219 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -194,6 +194,14 @@ static ssize_t show_dscr_default(struct device *dev, return sprintf(buf, "%lx\n", dscr_default); } +static void update_dscr(void *dummy) +{ + if (!current->thread.dscr_inherit) { + current->thread.dscr = dscr_default; + mtspr(SPRN_DSCR, dscr_default); + } +} + static ssize_t __used store_dscr_default(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -206,6 +214,8 @@ static ssize_t __used store_dscr_default(struct device *dev, return -EINVAL; dscr_default = val; + on_each_cpu(update_dscr, NULL, 1); + return count; } diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index be171ee73bf8..e49e93191b69 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -535,6 +535,15 @@ void timer_interrupt(struct pt_regs * regs) trace_timer_interrupt_exit(regs); } +/* + * Hypervisor decrementer interrupts shouldn't occur but are sometimes + * left pending on exit from a KVM guest. We don't need to do anything + * to clear them, as they are edge-triggered. + */ +void hdec_interrupt(struct pt_regs *regs) +{ +} + #ifdef CONFIG_SUSPEND static void generic_suspend_disable_irqs(void) { diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 158972341a2d..ae0843fa7a61 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -972,8 +972,9 @@ static int emulate_instruction(struct pt_regs *regs) cpu_has_feature(CPU_FTR_DSCR)) { PPC_WARN_EMULATED(mtdscr, regs); rd = (instword >> 21) & 0x1f; - mtspr(SPRN_DSCR, regs->gpr[rd]); + current->thread.dscr = regs->gpr[rd]; current->thread.dscr_inherit = 1; + mtspr(SPRN_DSCR, current->thread.dscr); return 0; } #endif diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c index dd223b3eb333..17e5b2364312 100644 --- a/arch/powerpc/lib/code-patching.c +++ b/arch/powerpc/lib/code-patching.c @@ -20,7 +20,7 @@ int patch_instruction(unsigned int *addr, unsigned int instr) { int err; - err = __put_user(instr, addr); + __put_user_size(instr, addr, 4, err); if (err) return err; asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (addr)); diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 39b159751c35..59213cfaeca9 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1436,11 +1436,11 @@ static long vphn_get_associativity(unsigned long cpu, /* * Update the node maps and sysfs entries for each cpu whose home node - * has changed. + * has changed. Returns 1 when the topology has changed, and 0 otherwise. */ int arch_update_cpu_topology(void) { - int cpu, nid, old_nid; + int cpu, nid, old_nid, changed = 0; unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0}; struct device *dev; @@ -1466,9 +1466,10 @@ int arch_update_cpu_topology(void) dev = get_cpu_device(cpu); if (dev) kobject_uevent(&dev->kobj, KOBJ_CHANGE); + changed = 1; } - return 1; + return changed; } static void topology_work_fn(struct work_struct *work) diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c index 3ef46254c35b..7698b6e13c57 100644 --- a/arch/powerpc/platforms/powernv/smp.c +++ b/arch/powerpc/platforms/powernv/smp.c @@ -106,14 +106,6 @@ static void pnv_smp_cpu_kill_self(void) { unsigned int cpu; - /* If powersave_nap is enabled, use NAP mode, else just - * spin aimlessly - */ - if (!powersave_nap) { - generic_mach_cpu_die(); - return; - } - /* Standard hot unplug procedure */ local_irq_disable(); idle_task_exit(); @@ -128,7 +120,7 @@ static void pnv_smp_cpu_kill_self(void) */ mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1); while (!generic_check_cpu_restart(cpu)) { - power7_idle(); + power7_nap(); if (!generic_check_cpu_restart(cpu)) { DBG("CPU%d Unexpected exit while offline !\n", cpu); /* We may be getting an IPI, so we re-enable diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c index 14469cf9df68..df0fc5821469 100644 --- a/arch/powerpc/sysdev/xics/icp-hv.c +++ b/arch/powerpc/sysdev/xics/icp-hv.c @@ -65,7 +65,11 @@ static inline void icp_hv_set_xirr(unsigned int value) static inline void icp_hv_set_qirr(int n_cpu , u8 value) { int hw_cpu = get_hard_smp_processor_id(n_cpu); - long rc = plpar_hcall_norets(H_IPI, hw_cpu, value); + long rc; + + /* Make sure all previous accesses are ordered before IPI sending */ + mb(); + rc = plpar_hcall_norets(H_IPI, hw_cpu, value); if (rc != H_SUCCESS) { pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x " "returned %ld\n", __func__, n_cpu, hw_cpu, value, rc); diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index bbaf2c59830a..457475f98414 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -409,7 +409,8 @@ int setup_one_line(struct line *lines, int n, char *init, line->valid = 1; err = parse_chan_pair(new, line, n, opts, error_out); if (!err) { - struct device *d = tty_register_device(driver, n, NULL); + struct device *d = tty_port_register_device(&line->port, + driver, n, NULL); if (IS_ERR(d)) { *error_out = "Failed to register device"; err = PTR_ERR(d); diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c index f60238559af3..0748fe0c8a73 100644 --- a/arch/um/os-Linux/time.c +++ b/arch/um/os-Linux/time.c @@ -114,7 +114,7 @@ static void deliver_alarm(void) skew += this_tick - last_tick; while (skew >= one_tick) { - alarm_handler(SIGVTALRM, NULL); + alarm_handler(SIGVTALRM, NULL, NULL); skew -= one_tick; } diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index b65a76133f4f..5141d808e751 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1283,7 +1283,7 @@ static void xen_flush_tlb_others(const struct cpumask *cpus, cpumask_clear_cpu(smp_processor_id(), to_cpumask(args->mask)); args->op.cmd = MMUEXT_TLB_FLUSH_MULTI; - if (start != TLB_FLUSH_ALL && (end - start) <= PAGE_SIZE) { + if (end != TLB_FLUSH_ALL && (end - start) <= PAGE_SIZE) { args->op.cmd = MMUEXT_INVLPG_MULTI; args->op.arg1.linear_addr = start; } diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index d4b255463253..76ba0e97e530 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -599,7 +599,7 @@ bool __init early_can_reuse_p2m_middle(unsigned long set_pfn, unsigned long set_ if (p2m_index(set_pfn)) return false; - for (pfn = 0; pfn <= MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) { + for (pfn = 0; pfn < MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) { topidx = p2m_top_index(pfn); if (!p2m_top[topidx]) diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c index f9726f6afdf1..2cd3d3a3400b 100644 --- a/arch/xtensa/platforms/iss/console.c +++ b/arch/xtensa/platforms/iss/console.c @@ -223,6 +223,7 @@ int __init rs_init(void) serial_driver->flags = TTY_DRIVER_REAL_RAW; tty_set_operations(serial_driver, &serial_ops); + tty_port_link_device(&serial_port, serial_driver, 0); if (tty_register_driver(serial_driver)) panic("Couldn't register serial driver\n"); diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c index 78efb0306a44..34d94c762a1e 100644 --- a/drivers/base/dma-contiguous.c +++ b/drivers/base/dma-contiguous.c @@ -250,7 +250,7 @@ int __init dma_declare_contiguous(struct device *dev, unsigned long size, return -EINVAL; /* Sanitise input arguments */ - alignment = PAGE_SIZE << max(MAX_ORDER, pageblock_order); + alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order); base = ALIGN(base, alignment); size = ALIGN(size, alignment); limit &= ~(alignment - 1); diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c index 12172a6a95c4..0bc8a6a6a148 100644 --- a/drivers/bluetooth/hci_ath.c +++ b/drivers/bluetooth/hci_ath.c @@ -58,7 +58,7 @@ static int ath_wakeup_ar3k(struct tty_struct *tty) return status; /* Disable Automatic RTSCTS */ - memcpy(&ktermios, tty->termios, sizeof(ktermios)); + ktermios = tty->termios; ktermios.c_cflag &= ~CRTSCTS; tty_set_termios(tty, &ktermios); diff --git a/drivers/char/mwave/mwavedd.c b/drivers/char/mwave/mwavedd.c index 1d82d5838f0c..164544afd680 100644 --- a/drivers/char/mwave/mwavedd.c +++ b/drivers/char/mwave/mwavedd.c @@ -430,7 +430,7 @@ static ssize_t mwave_write(struct file *file, const char __user *buf, static int register_serial_portandirq(unsigned int port, int irq) { - struct uart_port uart; + struct uart_8250_port uart; switch ( port ) { case 0x3f8: @@ -462,14 +462,14 @@ static int register_serial_portandirq(unsigned int port, int irq) } /* switch */ /* irq is okay */ - memset(&uart, 0, sizeof(struct uart_port)); + memset(&uart, 0, sizeof(uart)); - uart.uartclk = 1843200; - uart.iobase = port; - uart.irq = irq; - uart.iotype = UPIO_PORT; - uart.flags = UPF_SHARE_IRQ; - return serial8250_register_port(&uart); + uart.port.uartclk = 1843200; + uart.port.iobase = port; + uart.port.irq = irq; + uart.port.iotype = UPIO_PORT; + uart.port.flags = UPF_SHARE_IRQ; + return serial8250_register_8250_port(&uart); } diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 0a484b4a1b02..3f57d5de3957 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -1050,7 +1050,7 @@ static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty) wake_up_interruptible(&info->status_event_wait_q); wake_up_interruptible(&info->event_wait_q); - if (info->port.flags & ASYNC_CTS_FLOW) { + if (tty_port_cts_enabled(&info->port)) { if (tty->hw_stopped) { if (info->serial_signals & SerialSignal_CTS) { if (debug_level >= DEBUG_LEVEL_ISR) @@ -1344,7 +1344,7 @@ static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty) /* TODO:disable interrupts instead of reset to preserve signal states */ reset_device(info); - if (!tty || tty->termios->c_cflag & HUPCL) { + if (!tty || tty->termios.c_cflag & HUPCL) { info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); set_signals(info); } @@ -1385,7 +1385,7 @@ static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty) port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI); get_signals(info); - if (info->netcount || (tty && (tty->termios->c_cflag & CREAD))) + if (info->netcount || (tty && (tty->termios.c_cflag & CREAD))) rx_start(info); spin_unlock_irqrestore(&info->lock,flags); @@ -1398,14 +1398,14 @@ static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty) unsigned cflag; int bits_per_char; - if (!tty || !tty->termios) + if (!tty) return; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_change_params(%s)\n", __FILE__,__LINE__, info->device_name ); - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; /* if B0 rate (hangup) specified then negate DTR and RTS */ /* otherwise assert DTR and RTS */ @@ -1728,7 +1728,7 @@ static void mgslpc_throttle(struct tty_struct * tty) if (I_IXOFF(tty)) mgslpc_send_xchar(tty, STOP_CHAR(tty)); - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { spin_lock_irqsave(&info->lock,flags); info->serial_signals &= ~SerialSignal_RTS; set_signals(info); @@ -1757,7 +1757,7 @@ static void mgslpc_unthrottle(struct tty_struct * tty) mgslpc_send_xchar(tty, START_CHAR(tty)); } - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { spin_lock_irqsave(&info->lock,flags); info->serial_signals |= SerialSignal_RTS; set_signals(info); @@ -2293,8 +2293,8 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term tty->driver->name ); /* just return if nothing has changed */ - if ((tty->termios->c_cflag == old_termios->c_cflag) - && (RELEVANT_IFLAG(tty->termios->c_iflag) + if ((tty->termios.c_cflag == old_termios->c_cflag) + && (RELEVANT_IFLAG(tty->termios.c_iflag) == RELEVANT_IFLAG(old_termios->c_iflag))) return; @@ -2302,7 +2302,7 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term /* Handle transition to B0 status */ if (old_termios->c_cflag & CBAUD && - !(tty->termios->c_cflag & CBAUD)) { + !(tty->termios.c_cflag & CBAUD)) { info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); spin_lock_irqsave(&info->lock,flags); set_signals(info); @@ -2311,9 +2311,9 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term /* Handle transition away from B0 status */ if (!(old_termios->c_cflag & CBAUD) && - tty->termios->c_cflag & CBAUD) { + tty->termios.c_cflag & CBAUD) { info->serial_signals |= SerialSignal_DTR; - if (!(tty->termios->c_cflag & CRTSCTS) || + if (!(tty->termios.c_cflag & CRTSCTS) || !test_bit(TTY_THROTTLED, &tty->flags)) { info->serial_signals |= SerialSignal_RTS; } @@ -2324,7 +2324,7 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term /* Handle turning off CRTSCTS */ if (old_termios->c_cflag & CRTSCTS && - !(tty->termios->c_cflag & CRTSCTS)) { + !(tty->termios.c_cflag & CRTSCTS)) { tty->hw_stopped = 0; tx_release(tty); } @@ -2731,6 +2731,8 @@ static void mgslpc_add_device(MGSLPC_INFO *info) #if SYNCLINK_GENERIC_HDLC hdlcdev_init(info); #endif + tty_port_register_device(&info->port, serial_driver, info->line, + &info->p_dev->dev); } static void mgslpc_remove_device(MGSLPC_INFO *remove_info) @@ -2744,6 +2746,7 @@ static void mgslpc_remove_device(MGSLPC_INFO *remove_info) last->next_device = info->next_device; else mgslpc_device_list = info->next_device; + tty_unregister_device(serial_driver, info->line); #if SYNCLINK_GENERIC_HDLC hdlcdev_exit(info); #endif @@ -2798,77 +2801,63 @@ static const struct tty_operations mgslpc_ops = { .proc_fops = &mgslpc_proc_fops, }; -static void synclink_cs_cleanup(void) +static int __init synclink_cs_init(void) { int rc; - while(mgslpc_device_list) - mgslpc_remove_device(mgslpc_device_list); - - if (serial_driver) { - if ((rc = tty_unregister_driver(serial_driver))) - printk("%s(%d) failed to unregister tty driver err=%d\n", - __FILE__,__LINE__,rc); - put_tty_driver(serial_driver); + if (break_on_load) { + mgslpc_get_text_ptr(); + BREAKPOINT(); } - pcmcia_unregister_driver(&mgslpc_driver); -} - -static int __init synclink_cs_init(void) -{ - int rc; - - if (break_on_load) { - mgslpc_get_text_ptr(); - BREAKPOINT(); - } - - if ((rc = pcmcia_register_driver(&mgslpc_driver)) < 0) - return rc; - - serial_driver = alloc_tty_driver(MAX_DEVICE_COUNT); - if (!serial_driver) { - rc = -ENOMEM; - goto error; - } + serial_driver = tty_alloc_driver(MAX_DEVICE_COUNT, + TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_DEV); + if (IS_ERR(serial_driver)) { + rc = PTR_ERR(serial_driver); + goto err; + } - /* Initialize the tty_driver structure */ - - serial_driver->driver_name = "synclink_cs"; - serial_driver->name = "ttySLP"; - serial_driver->major = ttymajor; - serial_driver->minor_start = 64; - serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - serial_driver->subtype = SERIAL_TYPE_NORMAL; - serial_driver->init_termios = tty_std_termios; - serial_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - serial_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(serial_driver, &mgslpc_ops); - - if ((rc = tty_register_driver(serial_driver)) < 0) { - printk("%s(%d):Couldn't register serial driver\n", - __FILE__,__LINE__); - put_tty_driver(serial_driver); - serial_driver = NULL; - goto error; - } + /* Initialize the tty_driver structure */ + serial_driver->driver_name = "synclink_cs"; + serial_driver->name = "ttySLP"; + serial_driver->major = ttymajor; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + tty_set_operations(serial_driver, &mgslpc_ops); + + rc = tty_register_driver(serial_driver); + if (rc < 0) { + printk(KERN_ERR "%s(%d):Couldn't register serial driver\n", + __FILE__, __LINE__); + goto err_put_tty; + } - printk("%s %s, tty major#%d\n", - driver_name, driver_version, - serial_driver->major); + rc = pcmcia_register_driver(&mgslpc_driver); + if (rc < 0) + goto err_unreg_tty; - return 0; + printk(KERN_INFO "%s %s, tty major#%d\n", driver_name, driver_version, + serial_driver->major); -error: - synclink_cs_cleanup(); - return rc; + return 0; +err_unreg_tty: + tty_unregister_driver(serial_driver); +err_put_tty: + put_tty_driver(serial_driver); +err: + return rc; } static void __exit synclink_cs_exit(void) { - synclink_cs_cleanup(); + pcmcia_unregister_driver(&mgslpc_driver); + tty_unregister_driver(serial_driver); + put_tty_driver(serial_driver); } module_init(synclink_cs_init); diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c index 46b77ede84c0..af98f6d6509b 100644 --- a/drivers/char/ttyprintk.c +++ b/drivers/char/ttyprintk.c @@ -67,7 +67,7 @@ static int tpk_printk(const unsigned char *buf, int count) tmp[tpk_curr + 1] = '\0'; printk(KERN_INFO "%s%s", tpk_tag, tmp); tpk_curr = 0; - if (buf[i + 1] == '\n') + if ((i + 1) < count && buf[i + 1] == '\n') i++; break; case '\n': @@ -178,11 +178,17 @@ static struct tty_driver *ttyprintk_driver; static int __init ttyprintk_init(void) { int ret = -ENOMEM; - void *rp; - ttyprintk_driver = alloc_tty_driver(1); - if (!ttyprintk_driver) - return ret; + tty_port_init(&tpk_port.port); + tpk_port.port.ops = &null_ops; + mutex_init(&tpk_port.port_write_mutex); + + ttyprintk_driver = tty_alloc_driver(1, + TTY_DRIVER_RESET_TERMIOS | + TTY_DRIVER_REAL_RAW | + TTY_DRIVER_UNNUMBERED_NODE); + if (IS_ERR(ttyprintk_driver)) + return PTR_ERR(ttyprintk_driver); ttyprintk_driver->driver_name = "ttyprintk"; ttyprintk_driver->name = "ttyprintk"; @@ -191,9 +197,8 @@ static int __init ttyprintk_init(void) ttyprintk_driver->type = TTY_DRIVER_TYPE_CONSOLE; ttyprintk_driver->init_termios = tty_std_termios; ttyprintk_driver->init_termios.c_oflag = OPOST | OCRNL | ONOCR | ONLRET; - ttyprintk_driver->flags = TTY_DRIVER_RESET_TERMIOS | - TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; tty_set_operations(ttyprintk_driver, &ttyprintk_ops); + tty_port_link_device(&tpk_port.port, ttyprintk_driver, 0); ret = tty_register_driver(ttyprintk_driver); if (ret < 0) { @@ -201,22 +206,10 @@ static int __init ttyprintk_init(void) goto error; } - /* create our unnumbered device */ - rp = device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 3), NULL, - ttyprintk_driver->name); - if (IS_ERR(rp)) { - printk(KERN_ERR "Couldn't create ttyprintk device\n"); - ret = PTR_ERR(rp); - goto error; - } - - tty_port_init(&tpk_port.port); - tpk_port.port.ops = &null_ops; - mutex_init(&tpk_port.port_write_mutex); - return 0; error: + tty_unregister_driver(ttyprintk_driver); put_tty_driver(ttyprintk_driver); ttyprintk_driver = NULL; return ret; diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c index ae0561826137..2e1662777661 100644 --- a/drivers/dma/omap-dma.c +++ b/drivers/dma/omap-dma.c @@ -18,6 +18,8 @@ #include <linux/spinlock.h> #include "virt-dma.h" + +#include <plat/cpu.h> #include <plat/dma.h> struct omap_dmadev { diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index b16c8a72a2e2..ba7926f5c099 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -294,7 +294,7 @@ config GPIO_MAX732X_IRQ config GPIO_MC9S08DZ60 bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions" - depends on I2C && MACH_MX35_3DS + depends on I2C=y && MACH_MX35_3DS help Select this to enable the MC9S08DZ60 GPIO driver diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c index ae37181798b3..ec48ed512628 100644 --- a/drivers/gpio/gpio-em.c +++ b/drivers/gpio/gpio-em.c @@ -247,9 +247,9 @@ static int __devinit em_gio_irq_domain_init(struct em_gio_priv *p) p->irq_base = irq_alloc_descs(pdata->irq_base, 0, pdata->number_of_pins, numa_node_id()); - if (IS_ERR_VALUE(p->irq_base)) { + if (p->irq_base < 0) { dev_err(&pdev->dev, "cannot get irq_desc\n"); - return -ENXIO; + return p->irq_base; } pr_debug("gio: hw base = %d, nr = %d, sw base = %d\n", pdata->gpio_base, pdata->number_of_pins, p->irq_base); diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index e6efd77668f0..64fbce30c502 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -25,11 +25,9 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/irqdomain.h> +#include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <mach/irqs.h> -#include <asm/gpio.h> #include <asm/mach/irq.h> #define OFF_MODE 1 @@ -385,13 +383,16 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, static int gpio_irq_type(struct irq_data *d, unsigned type) { struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - unsigned gpio; + unsigned gpio = 0; int retval; unsigned long flags; - if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE) +#ifdef CONFIG_ARCH_OMAP1 + if (d->irq > IH_MPUIO_BASE) gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE); - else +#endif + + if (!gpio) gpio = irq_to_gpio(bank, d->irq); if (type & ~IRQ_TYPE_SENSE_MASK) diff --git a/drivers/gpio/gpio-rdc321x.c b/drivers/gpio/gpio-rdc321x.c index e97016af6443..b62d443e9a59 100644 --- a/drivers/gpio/gpio-rdc321x.c +++ b/drivers/gpio/gpio-rdc321x.c @@ -170,6 +170,7 @@ static int __devinit rdc321x_gpio_probe(struct platform_device *pdev) rdc321x_gpio_dev->reg2_data_base = r->start + 0x4; rdc321x_gpio_dev->chip.label = "rdc321x-gpio"; + rdc321x_gpio_dev->chip.owner = THIS_MODULE; rdc321x_gpio_dev->chip.direction_input = rdc_gpio_direction_input; rdc321x_gpio_dev->chip.direction_output = rdc_gpio_config; rdc321x_gpio_dev->chip.get = rdc_gpio_get_value; diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c index 94256fe7bf36..c5f8ca233e1f 100644 --- a/drivers/gpio/gpio-twl4030.c +++ b/drivers/gpio/gpio-twl4030.c @@ -51,6 +51,7 @@ static struct gpio_chip twl_gpiochip; +static int twl4030_gpio_base; static int twl4030_gpio_irq_base; /* genirq interfaces are not available to modules */ @@ -395,6 +396,29 @@ static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd) static int gpio_twl4030_remove(struct platform_device *pdev); +static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev) +{ + struct twl4030_gpio_platform_data *omap_twl_info; + + omap_twl_info = devm_kzalloc(dev, sizeof(*omap_twl_info), GFP_KERNEL); + if (!omap_twl_info) + return NULL; + + omap_twl_info->use_leds = of_property_read_bool(dev->of_node, + "ti,use-leds"); + + of_property_read_u32(dev->of_node, "ti,debounce", + &omap_twl_info->debounce); + of_property_read_u32(dev->of_node, "ti,mmc-cd", + (u32 *)&omap_twl_info->mmc_cd); + of_property_read_u32(dev->of_node, "ti,pullups", + &omap_twl_info->pullups); + of_property_read_u32(dev->of_node, "ti,pulldowns", + &omap_twl_info->pulldowns); + + return omap_twl_info; +} + static int __devinit gpio_twl4030_probe(struct platform_device *pdev) { struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; @@ -427,49 +451,57 @@ no_irqs: twl_gpiochip.ngpio = TWL4030_GPIO_MAX; twl_gpiochip.dev = &pdev->dev; - if (pdata) { - twl_gpiochip.base = pdata->gpio_base; + if (node) + pdata = of_gpio_twl4030(&pdev->dev); - /* - * NOTE: boards may waste power if they don't set pullups - * and pulldowns correctly ... default for non-ULPI pins is - * pulldown, and some other pins may have external pullups - * or pulldowns. Careful! - */ - ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns); - if (ret) - dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n", - pdata->pullups, pdata->pulldowns, - ret); - - ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd); - if (ret) - dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n", - pdata->debounce, pdata->mmc_cd, - ret); - - /* - * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE, - * is (still) clear if use_leds is set. - */ - if (pdata->use_leds) - twl_gpiochip.ngpio += 2; + if (pdata == NULL) { + dev_err(&pdev->dev, "Platform data is missing\n"); + return -ENXIO; } + /* + * NOTE: boards may waste power if they don't set pullups + * and pulldowns correctly ... default for non-ULPI pins is + * pulldown, and some other pins may have external pullups + * or pulldowns. Careful! + */ + ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns); + if (ret) + dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n", + pdata->pullups, pdata->pulldowns, ret); + + ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd); + if (ret) + dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n", + pdata->debounce, pdata->mmc_cd, ret); + + /* + * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE, + * is (still) clear if use_leds is set. + */ + if (pdata->use_leds) + twl_gpiochip.ngpio += 2; + ret = gpiochip_add(&twl_gpiochip); if (ret < 0) { dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret); twl_gpiochip.ngpio = 0; gpio_twl4030_remove(pdev); - } else if (pdata && pdata->setup) { + goto out; + } + + twl4030_gpio_base = twl_gpiochip.base; + + if (pdata && pdata->setup) { int status; status = pdata->setup(&pdev->dev, - pdata->gpio_base, TWL4030_GPIO_MAX); + twl4030_gpio_base, TWL4030_GPIO_MAX); if (status) dev_dbg(&pdev->dev, "setup --> %d\n", status); } +out: return ret; } @@ -481,7 +513,7 @@ static int gpio_twl4030_remove(struct platform_device *pdev) if (pdata && pdata->teardown) { status = pdata->teardown(&pdev->dev, - pdata->gpio_base, TWL4030_GPIO_MAX); + twl4030_gpio_base, TWL4030_GPIO_MAX); if (status) { dev_dbg(&pdev->dev, "teardown --> %d\n", status); return status; diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index a18c4aa68b1e..f1a45997aea8 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -82,7 +82,7 @@ int of_get_named_gpio_flags(struct device_node *np, const char *propname, gpiochip_find(&gg_data, of_gpiochip_find_and_xlate); of_node_put(gg_data.gpiospec.np); - pr_debug("%s exited with status %d\n", __func__, ret); + pr_debug("%s exited with status %d\n", __func__, gg_data.out_gpio); return gg_data.out_gpio; } EXPORT_SYMBOL(of_get_named_gpio_flags); diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 8bf8a64e5115..8bcd168fffae 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -996,7 +996,8 @@ static void hid_process_event(struct hid_device *hid, struct hid_field *field, struct hid_driver *hdrv = hid->driver; int ret; - hid_dump_input(hid, usage, value); + if (!list_empty(&hid->debug_list)) + hid_dump_input(hid, usage, value); if (hdrv && hdrv->event && hid_match_usage(hid, usage)) { ret = hdrv->event(hid, field, usage, value); @@ -1558,7 +1559,9 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LCPOWER, USB_DEVICE_ID_LCPOWER_LC1000 ) }, - { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPKBD) }, +#if IS_ENABLED(CONFIG_HID_LENOVO_TPKBD) + { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPKBD) }, +#endif { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2) }, diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c index 0f9c146fc00d..4d524b5f52f5 100644 --- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -439,7 +439,7 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) struct dj_report *dj_report; int retval; - dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL); + dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL); if (!dj_report) return -ENOMEM; dj_report->report_id = REPORT_ID_DJ_SHORT; @@ -456,7 +456,7 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, struct dj_report *dj_report; int retval; - dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL); + dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL); if (!dj_report) return -ENOMEM; dj_report->report_id = REPORT_ID_DJ_SHORT; diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 903eef3d3e10..991e85c7325c 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -70,6 +70,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET }, { USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS }, diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index c50fa75416f8..b4b65af8612a 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -533,7 +533,7 @@ config KEYBOARD_DAVINCI config KEYBOARD_OMAP tristate "TI OMAP keypad support" - depends on (ARCH_OMAP1 || ARCH_OMAP2) + depends on ARCH_OMAP1 select INPUT_MATRIXKMAP help Say Y here if you want to use the OMAP keypad. diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c index ff4c0a87a25f..ce68e361558c 100644 --- a/drivers/input/keyboard/imx_keypad.c +++ b/drivers/input/keyboard/imx_keypad.c @@ -358,6 +358,7 @@ static void imx_keypad_inhibit(struct imx_keypad *keypad) /* Inhibit KDI and KRI interrupts. */ reg_val = readw(keypad->mmio_base + KPSR); reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE); + reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD; writew(reg_val, keypad->mmio_base + KPSR); /* Colums as open drain and disable all rows */ @@ -515,7 +516,9 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev) input_set_drvdata(input_dev, keypad); /* Ensure that the keypad will stay dormant until opened */ + clk_enable(keypad->clk); imx_keypad_inhibit(keypad); + clk_disable(keypad->clk); error = request_irq(irq, imx_keypad_irq_handler, 0, pdev->name, keypad); diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index a0222db4dc86..2bda5f0b9c6e 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -35,13 +35,9 @@ #include <linux/mutex.h> #include <linux/errno.h> #include <linux/slab.h> -#include <asm/gpio.h> +#include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> #include <plat/keypad.h> -#include <plat/menelaus.h> -#include <asm/irq.h> -#include <mach/hardware.h> -#include <asm/io.h> -#include <plat/mux.h> #undef NEW_BOARD_LEARNING_MODE @@ -96,28 +92,8 @@ static u8 get_row_gpio_val(struct omap_kp *omap_kp) static irqreturn_t omap_kp_interrupt(int irq, void *dev_id) { - struct omap_kp *omap_kp = dev_id; - /* disable keyboard interrupt and schedule for handling */ - if (cpu_is_omap24xx()) { - int i; - - for (i = 0; i < omap_kp->rows; i++) { - int gpio_irq = gpio_to_irq(row_gpios[i]); - /* - * The interrupt which we're currently handling should - * be disabled _nosync() to avoid deadlocks waiting - * for this handler to complete. All others should - * be disabled the regular way for SMP safety. - */ - if (gpio_irq == irq) - disable_irq_nosync(gpio_irq); - else - disable_irq(gpio_irq); - } - } else - /* disable keyboard interrupt and schedule for handling */ - omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); tasklet_schedule(&kp_tasklet); @@ -133,33 +109,22 @@ static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state) { int col = 0; - /* read the keypad status */ - if (cpu_is_omap24xx()) { - /* read the keypad status */ - for (col = 0; col < omap_kp->cols; col++) { - set_col_gpio_val(omap_kp, ~(1 << col)); - state[col] = ~(get_row_gpio_val(omap_kp)) & 0xff; - } - set_col_gpio_val(omap_kp, 0); - - } else { - /* disable keyboard interrupt and schedule for handling */ - omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + /* disable keyboard interrupt and schedule for handling */ + omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); - /* read the keypad status */ - omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC); - for (col = 0; col < omap_kp->cols; col++) { - omap_writew(~(1 << col) & 0xff, - OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC); + /* read the keypad status */ + omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC); + for (col = 0; col < omap_kp->cols; col++) { + omap_writew(~(1 << col) & 0xff, + OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC); - udelay(omap_kp->delay); + udelay(omap_kp->delay); - state[col] = ~omap_readw(OMAP1_MPUIO_BASE + - OMAP_MPUIO_KBR_LATCH) & 0xff; - } - omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC); - udelay(2); + state[col] = ~omap_readw(OMAP1_MPUIO_BASE + + OMAP_MPUIO_KBR_LATCH) & 0xff; } + omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC); + udelay(2); } static void omap_kp_tasklet(unsigned long data) @@ -222,14 +187,8 @@ static void omap_kp_tasklet(unsigned long data) mod_timer(&omap_kp_data->timer, jiffies + delay); } else { /* enable interrupts */ - if (cpu_is_omap24xx()) { - int i; - for (i = 0; i < omap_kp_data->rows; i++) - enable_irq(gpio_to_irq(row_gpios[i])); - } else { - omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); - kp_cur_group = -1; - } + omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + kp_cur_group = -1; } } @@ -242,6 +201,7 @@ static ssize_t omap_kp_enable_show(struct device *dev, static ssize_t omap_kp_enable_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { + struct omap_kp *omap_kp = dev_get_drvdata(dev); int state; if (sscanf(buf, "%u", &state) != 1) @@ -253,9 +213,9 @@ static ssize_t omap_kp_enable_store(struct device *dev, struct device_attribute mutex_lock(&kp_enable_mutex); if (state != kp_enable) { if (state) - enable_irq(INT_KEYBOARD); + enable_irq(omap_kp->irq); else - disable_irq(INT_KEYBOARD); + disable_irq(omap_kp->irq); kp_enable = state; } mutex_unlock(&kp_enable_mutex); @@ -289,7 +249,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev) struct omap_kp *omap_kp; struct input_dev *input_dev; struct omap_kp_platform_data *pdata = pdev->dev.platform_data; - int i, col_idx, row_idx, irq_idx, ret; + int i, col_idx, row_idx, ret; unsigned int row_shift, keycodemax; if (!pdata->rows || !pdata->cols || !pdata->keymap_data) { @@ -314,8 +274,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev) omap_kp->input = input_dev; /* Disable the interrupt for the MPUIO keyboard */ - if (!cpu_is_omap24xx()) - omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); if (pdata->delay) omap_kp->delay = pdata->delay; @@ -328,31 +287,8 @@ static int __devinit omap_kp_probe(struct platform_device *pdev) omap_kp->rows = pdata->rows; omap_kp->cols = pdata->cols; - if (cpu_is_omap24xx()) { - /* Cols: outputs */ - for (col_idx = 0; col_idx < omap_kp->cols; col_idx++) { - if (gpio_request(col_gpios[col_idx], "omap_kp_col") < 0) { - printk(KERN_ERR "Failed to request" - "GPIO%d for keypad\n", - col_gpios[col_idx]); - goto err1; - } - gpio_direction_output(col_gpios[col_idx], 0); - } - /* Rows: inputs */ - for (row_idx = 0; row_idx < omap_kp->rows; row_idx++) { - if (gpio_request(row_gpios[row_idx], "omap_kp_row") < 0) { - printk(KERN_ERR "Failed to request" - "GPIO%d for keypad\n", - row_gpios[row_idx]); - goto err2; - } - gpio_direction_input(row_gpios[row_idx]); - } - } else { - col_idx = 0; - row_idx = 0; - } + col_idx = 0; + row_idx = 0; setup_timer(&omap_kp->timer, omap_kp_timer, (unsigned long)omap_kp); @@ -394,27 +330,16 @@ static int __devinit omap_kp_probe(struct platform_device *pdev) /* scan current status and enable interrupt */ omap_kp_scan_keypad(omap_kp, keypad_state); - if (!cpu_is_omap24xx()) { - omap_kp->irq = platform_get_irq(pdev, 0); - if (omap_kp->irq >= 0) { - if (request_irq(omap_kp->irq, omap_kp_interrupt, 0, - "omap-keypad", omap_kp) < 0) - goto err4; - } - omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); - } else { - for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) { - if (request_irq(gpio_to_irq(row_gpios[irq_idx]), - omap_kp_interrupt, - IRQF_TRIGGER_FALLING, - "omap-keypad", omap_kp) < 0) - goto err5; - } + omap_kp->irq = platform_get_irq(pdev, 0); + if (omap_kp->irq >= 0) { + if (request_irq(omap_kp->irq, omap_kp_interrupt, 0, + "omap-keypad", omap_kp) < 0) + goto err4; } + omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + return 0; -err5: - for (i = irq_idx - 1; i >=0; i--) - free_irq(row_gpios[i], omap_kp); + err4: input_unregister_device(omap_kp->input); input_dev = NULL; @@ -423,7 +348,6 @@ err3: err2: for (i = row_idx - 1; i >=0; i--) gpio_free(row_gpios[i]); -err1: for (i = col_idx - 1; i >=0; i--) gpio_free(col_gpios[i]); @@ -439,18 +363,8 @@ static int __devexit omap_kp_remove(struct platform_device *pdev) /* disable keypad interrupt handling */ tasklet_disable(&kp_tasklet); - if (cpu_is_omap24xx()) { - int i; - for (i = 0; i < omap_kp->cols; i++) - gpio_free(col_gpios[i]); - for (i = 0; i < omap_kp->rows; i++) { - gpio_free(row_gpios[i]); - free_irq(gpio_to_irq(row_gpios[i]), omap_kp); - } - } else { - omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); - free_irq(omap_kp->irq, omap_kp); - } + omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + free_irq(omap_kp->irq, omap_kp); del_timer_sync(&omap_kp->timer); tasklet_kill(&kp_tasklet); diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 5ec774d6c82b..6918773ce024 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -177,6 +177,20 @@ static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = { }, }, { + /* Gigabyte T1005 - defines wrong chassis type ("Other") */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "T1005"), + }, + }, + { + /* Gigabyte T1005M/P - defines wrong chassis type ("Other") */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "T1005M/P"), + }, + }, + { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv9700"), diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 002041975de9..532d067a9e07 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1848,7 +1848,10 @@ static const struct wacom_features wacom_features_0x2A = { "Wacom Intuos5 M", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047, 63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xF4 = - { "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, + { "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, + 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xF8 = + { "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x3F = { "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023, @@ -2091,6 +2094,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xEF) }, { USB_DEVICE_WACOM(0x47) }, { USB_DEVICE_WACOM(0xF4) }, + { USB_DEVICE_WACOM(0xF8) }, { USB_DEVICE_WACOM(0xFA) }, { USB_DEVICE_LENOVO(0x6004) }, { } diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 9afc777a40a7..b06a5e3a665e 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -602,6 +602,7 @@ edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata) { if (tsdata->debug_dir) debugfs_remove_recursive(tsdata->debug_dir); + kfree(tsdata->raw_buffer); } #else @@ -843,7 +844,6 @@ static int __devexit edt_ft5x06_ts_remove(struct i2c_client *client) if (gpio_is_valid(pdata->reset_pin)) gpio_free(pdata->reset_pin); - kfree(tsdata->raw_buffer); kfree(tsdata); return 0; diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c index 38c4bd87b2c9..c679867c2ccd 100644 --- a/drivers/isdn/capi/capi.c +++ b/drivers/isdn/capi/capi.c @@ -234,7 +234,8 @@ static struct capiminor *capiminor_alloc(struct capi20_appl *ap, u32 ncci) mp->minor = minor; - dev = tty_register_device(capinc_tty_driver, minor, NULL); + dev = tty_port_register_device(&mp->port, capinc_tty_driver, minor, + NULL); if (IS_ERR(dev)) goto err_out2; diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c index a6d9fd2858f7..67abf3ff45e8 100644 --- a/drivers/isdn/gigaset/interface.c +++ b/drivers/isdn/gigaset/interface.c @@ -446,8 +446,8 @@ static void if_set_termios(struct tty_struct *tty, struct ktermios *old) goto out; } - iflag = tty->termios->c_iflag; - cflag = tty->termios->c_cflag; + iflag = tty->termios.c_iflag; + cflag = tty->termios.c_cflag; old_cflag = old ? old->c_cflag : cflag; gig_dbg(DEBUG_IF, "%u: iflag %x cflag %x old %x", cs->minor_index, iflag, cflag, old_cflag); @@ -524,7 +524,8 @@ void gigaset_if_init(struct cardstate *cs) tasklet_init(&cs->if_wake_tasklet, if_wake, (unsigned long) cs); mutex_lock(&cs->mutex); - cs->tty_dev = tty_register_device(drv->tty, cs->minor_index, NULL); + cs->tty_dev = tty_port_register_device(&cs->port, drv->tty, + cs->minor_index, NULL); if (!IS_ERR(cs->tty_dev)) dev_set_drvdata(cs->tty_dev, cs); diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c index 7bc50670d7d9..b817809f763c 100644 --- a/drivers/isdn/i4l/isdn_tty.c +++ b/drivers/isdn/i4l/isdn_tty.c @@ -1009,15 +1009,15 @@ isdn_tty_change_speed(modem_info *info) quot; int i; - if (!port->tty || !port->tty->termios) + if (!port->tty) return; - cflag = port->tty->termios->c_cflag; + cflag = port->tty->termios.c_cflag; quot = i = cflag & CBAUD; if (i & CBAUDEX) { i &= ~CBAUDEX; if (i < 1 || i > 2) - port->tty->termios->c_cflag &= ~CBAUDEX; + port->tty->termios.c_cflag &= ~CBAUDEX; else i += 15; } @@ -1097,7 +1097,7 @@ isdn_tty_shutdown(modem_info *info) #endif isdn_unlock_drivers(); info->msr &= ~UART_MSR_RI; - if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) { + if (!info->port.tty || (info->port.tty->termios.c_cflag & HUPCL)) { info->mcr &= ~(UART_MCR_DTR | UART_MCR_RTS); if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) { isdn_tty_modem_reset_regs(info, 0); @@ -1469,13 +1469,13 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios) if (!old_termios) isdn_tty_change_speed(info); else { - if (tty->termios->c_cflag == old_termios->c_cflag && - tty->termios->c_ispeed == old_termios->c_ispeed && - tty->termios->c_ospeed == old_termios->c_ospeed) + if (tty->termios.c_cflag == old_termios->c_cflag && + tty->termios.c_ispeed == old_termios->c_ispeed && + tty->termios.c_ospeed == old_termios->c_ospeed) return; isdn_tty_change_speed(info); if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) + !(tty->termios.c_cflag & CRTSCTS)) tty->hw_stopped = 0; } } @@ -1486,6 +1486,18 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios) * ------------------------------------------------------------ */ +static int isdn_tty_install(struct tty_driver *driver, struct tty_struct *tty) +{ + modem_info *info = &dev->mdm.info[tty->index]; + + if (isdn_tty_paranoia_check(info, tty->name, __func__)) + return -ENODEV; + + tty->driver_data = info; + + return tty_port_install(&info->port, driver, tty); +} + /* * This routine is called whenever a serial port is opened. It * enables interrupts for a serial port, linking in its async structure into @@ -1495,22 +1507,16 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios) static int isdn_tty_open(struct tty_struct *tty, struct file *filp) { - struct tty_port *port; - modem_info *info; + modem_info *info = tty->driver_data; + struct tty_port *port = &info->port; int retval; - info = &dev->mdm.info[tty->index]; - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_open")) - return -ENODEV; - port = &info->port; #ifdef ISDN_DEBUG_MODEM_OPEN printk(KERN_DEBUG "isdn_tty_open %s, count = %d\n", tty->name, port->count); #endif port->count++; - tty->driver_data = info; port->tty = tty; - tty->port = port; /* * Start up serial port */ @@ -1738,6 +1744,7 @@ modem_write_profile(atemu *m) } static const struct tty_operations modem_ops = { + .install = isdn_tty_install, .open = isdn_tty_open, .close = isdn_tty_close, .write = isdn_tty_write, @@ -1782,7 +1789,7 @@ isdn_tty_modem_init(void) m->tty_modem->subtype = SERIAL_TYPE_NORMAL; m->tty_modem->init_termios = tty_std_termios; m->tty_modem->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - m->tty_modem->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + m->tty_modem->flags = TTY_DRIVER_REAL_RAW; m->tty_modem->driver_name = "isdn_tty"; tty_set_operations(m->tty_modem, &modem_ops); retval = tty_register_driver(m->tty_modem); diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c index 88cf9d952631..409da0f8e5cf 100644 --- a/drivers/media/video/omap/omap_vout.c +++ b/drivers/media/video/omap/omap_vout.c @@ -44,6 +44,7 @@ #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#include <plat/cpu.h> #include <plat/dma.h> #include <plat/vrfb.h> #include <video/omapdss.h> diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c index 1c347633e663..43e61fe5df50 100644 --- a/drivers/media/video/omap3isp/isp.c +++ b/drivers/media/video/omap3isp/isp.c @@ -70,6 +70,8 @@ #include <media/v4l2-common.h> #include <media/v4l2-device.h> +#include <plat/cpu.h> + #include "isp.h" #include "ispreg.h" #include "ispccdc.h" diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 1c32afed28aa..f462ff226c8d 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -46,6 +46,8 @@ #include <linux/i2c.h> #include <linux/i2c/twl.h> +#include <plat/cpu.h> + #include "twl-core.h" /* diff --git a/drivers/misc/ibmasm/uart.c b/drivers/misc/ibmasm/uart.c index 1dcb9ae1905a..01e2b0d7e590 100644 --- a/drivers/misc/ibmasm/uart.c +++ b/drivers/misc/ibmasm/uart.c @@ -33,7 +33,7 @@ void ibmasm_register_uart(struct service_processor *sp) { - struct uart_port uport; + struct uart_8250_port uart; void __iomem *iomem_base; iomem_base = sp->base_address + SCOUT_COM_B_BASE; @@ -47,14 +47,14 @@ void ibmasm_register_uart(struct service_processor *sp) return; } - memset(&uport, 0, sizeof(struct uart_port)); - uport.irq = sp->irq; - uport.uartclk = 3686400; - uport.flags = UPF_SHARE_IRQ; - uport.iotype = UPIO_MEM; - uport.membase = iomem_base; + memset(&uart, 0, sizeof(uart)); + uart.port.irq = sp->irq; + uart.port.uartclk = 3686400; + uart.port.flags = UPF_SHARE_IRQ; + uart.port.iotype = UPIO_MEM; + uart.port.membase = iomem_base; - sp->serial_line = serial8250_register_port(&uport); + sp->serial_line = serial8250_register_8250_port(&uart); if (sp->serial_line < 0) { dev_err(sp->dev, "Failed to register serial port\n"); return; diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c index b7eb545394b1..4999b34b7a60 100644 --- a/drivers/misc/pti.c +++ b/drivers/misc/pti.c @@ -60,7 +60,7 @@ struct pti_tty { }; struct pti_dev { - struct tty_port port; + struct tty_port port[PTITTY_MINOR_NUM]; unsigned long pti_addr; unsigned long aperture_base; void __iomem *pti_ioaddr; @@ -76,7 +76,7 @@ struct pti_dev { */ static DEFINE_MUTEX(alloclock); -static struct pci_device_id pci_ids[] __devinitconst = { +static const struct pci_device_id pci_ids[] __devinitconst = { {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x82B)}, {0} }; @@ -393,25 +393,6 @@ void pti_writedata(struct pti_masterchannel *mc, u8 *buf, int count) } EXPORT_SYMBOL_GPL(pti_writedata); -/** - * pti_pci_remove()- Driver exit method to remove PTI from - * PCI bus. - * @pdev: variable containing pci info of PTI. - */ -static void __devexit pti_pci_remove(struct pci_dev *pdev) -{ - struct pti_dev *drv_data; - - drv_data = pci_get_drvdata(pdev); - if (drv_data != NULL) { - pci_iounmap(pdev, drv_data->pti_ioaddr); - pci_set_drvdata(pdev, NULL); - kfree(drv_data); - pci_release_region(pdev, 1); - pci_disable_device(pdev); - } -} - /* * for the tty_driver_*() basic function descriptions, see tty_driver.h. * Specific header comments made for PTI-related specifics. @@ -446,7 +427,7 @@ static int pti_tty_driver_open(struct tty_struct *tty, struct file *filp) * also removes a locking requirement for the actual write * procedure. */ - return tty_port_open(&drv_data->port, tty, filp); + return tty_port_open(tty->port, tty, filp); } /** @@ -462,7 +443,7 @@ static int pti_tty_driver_open(struct tty_struct *tty, struct file *filp) */ static void pti_tty_driver_close(struct tty_struct *tty, struct file *filp) { - tty_port_close(&drv_data->port, tty, filp); + tty_port_close(tty->port, tty, filp); } /** @@ -818,6 +799,7 @@ static const struct tty_port_operations tty_port_ops = { static int __devinit pti_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { + unsigned int a; int retval = -EINVAL; int pci_bar = 1; @@ -830,7 +812,7 @@ static int __devinit pti_pci_probe(struct pci_dev *pdev, __func__, __LINE__); pr_err("%s(%d): Error value returned: %d\n", __func__, __LINE__, retval); - return retval; + goto err; } retval = pci_enable_device(pdev); @@ -838,17 +820,16 @@ static int __devinit pti_pci_probe(struct pci_dev *pdev, dev_err(&pdev->dev, "%s: pci_enable_device() returned error %d\n", __func__, retval); - return retval; + goto err_unreg_misc; } drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL); - if (drv_data == NULL) { retval = -ENOMEM; dev_err(&pdev->dev, "%s(%d): kmalloc() returned NULL memory.\n", __func__, __LINE__); - return retval; + goto err_disable_pci; } drv_data->pti_addr = pci_resource_start(pdev, pci_bar); @@ -857,33 +838,65 @@ static int __devinit pti_pci_probe(struct pci_dev *pdev, dev_err(&pdev->dev, "%s(%d): pci_request_region() returned error %d\n", __func__, __LINE__, retval); - kfree(drv_data); - return retval; + goto err_free_dd; } drv_data->aperture_base = drv_data->pti_addr+APERTURE_14; drv_data->pti_ioaddr = ioremap_nocache((u32)drv_data->aperture_base, APERTURE_LEN); if (!drv_data->pti_ioaddr) { - pci_release_region(pdev, pci_bar); retval = -ENOMEM; - kfree(drv_data); - return retval; + goto err_rel_reg; } pci_set_drvdata(pdev, drv_data); - tty_port_init(&drv_data->port); - drv_data->port.ops = &tty_port_ops; + for (a = 0; a < PTITTY_MINOR_NUM; a++) { + struct tty_port *port = &drv_data->port[a]; + tty_port_init(port); + port->ops = &tty_port_ops; - tty_register_device(pti_tty_driver, 0, &pdev->dev); - tty_register_device(pti_tty_driver, 1, &pdev->dev); + tty_port_register_device(port, pti_tty_driver, a, &pdev->dev); + } register_console(&pti_console); + return 0; +err_rel_reg: + pci_release_region(pdev, pci_bar); +err_free_dd: + kfree(drv_data); +err_disable_pci: + pci_disable_device(pdev); +err_unreg_misc: + misc_deregister(&pti_char_driver); +err: return retval; } +/** + * pti_pci_remove()- Driver exit method to remove PTI from + * PCI bus. + * @pdev: variable containing pci info of PTI. + */ +static void __devexit pti_pci_remove(struct pci_dev *pdev) +{ + struct pti_dev *drv_data = pci_get_drvdata(pdev); + + unregister_console(&pti_console); + + tty_unregister_device(pti_tty_driver, 0); + tty_unregister_device(pti_tty_driver, 1); + + iounmap(drv_data->pti_ioaddr); + pci_set_drvdata(pdev, NULL); + kfree(drv_data); + pci_release_region(pdev, 1); + pci_disable_device(pdev); + + misc_deregister(&pti_char_driver); +} + static struct pci_driver pti_pci_driver = { .name = PCINAME, .id_table = pci_ids, @@ -933,25 +946,24 @@ static int __init pti_init(void) pr_err("%s(%d): Error value returned: %d\n", __func__, __LINE__, retval); - pti_tty_driver = NULL; - return retval; + goto put_tty; } retval = pci_register_driver(&pti_pci_driver); - if (retval) { pr_err("%s(%d): PCI registration failed of pti driver\n", __func__, __LINE__); pr_err("%s(%d): Error value returned: %d\n", __func__, __LINE__, retval); - - tty_unregister_driver(pti_tty_driver); - pr_err("%s(%d): Unregistering TTY part of pti driver\n", - __func__, __LINE__); - pti_tty_driver = NULL; - return retval; + goto unreg_tty; } + return 0; +unreg_tty: + tty_unregister_driver(pti_tty_driver); +put_tty: + put_tty_driver(pti_tty_driver); + pti_tty_driver = NULL; return retval; } @@ -960,31 +972,9 @@ static int __init pti_init(void) */ static void __exit pti_exit(void) { - int retval; - - tty_unregister_device(pti_tty_driver, 0); - tty_unregister_device(pti_tty_driver, 1); - - retval = tty_unregister_driver(pti_tty_driver); - if (retval) { - pr_err("%s(%d): TTY unregistration failed of pti driver\n", - __func__, __LINE__); - pr_err("%s(%d): Error value returned: %d\n", - __func__, __LINE__, retval); - } - + tty_unregister_driver(pti_tty_driver); pci_unregister_driver(&pti_pci_driver); - - retval = misc_deregister(&pti_char_driver); - if (retval) { - pr_err("%s(%d): CHAR unregistration failed of pti driver\n", - __func__, __LINE__); - pr_err("%s(%d): Error value returned: %d\n", - __func__, __LINE__, retval); - } - - unregister_console(&pti_console); - return; + put_tty_driver(pti_tty_driver); } module_init(pti_init); diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index f1c84decb192..172a768036d8 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1411,7 +1411,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) /* complete ongoing async transfer before issuing discard */ if (card->host->areq) mmc_blk_issue_rw_rq(mq, NULL); - if (req->cmd_flags & REQ_SECURE) + if (req->cmd_flags & REQ_SECURE && + !(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN)) ret = mmc_blk_issue_secdiscard_rq(mq, req); else ret = mmc_blk_issue_discard_rq(mq, req); @@ -1716,6 +1717,7 @@ force_ro_fail: #define CID_MANFID_SANDISK 0x2 #define CID_MANFID_TOSHIBA 0x11 #define CID_MANFID_MICRON 0x13 +#define CID_MANFID_SAMSUNG 0x15 static const struct mmc_fixup blk_fixups[] = { @@ -1752,6 +1754,28 @@ static const struct mmc_fixup blk_fixups[] = MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc, MMC_QUIRK_LONG_READ_TIME), + /* + * On these Samsung MoviNAND parts, performing secure erase or + * secure trim can result in unrecoverable corruption due to a + * firmware bug. + */ + MMC_FIXUP("M8G2FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("MAG4FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("MBG8FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("MCGAFA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("VAL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("VYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("KYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("VZL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + END_FIXUP }; diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index 5a2cbfac66d2..d2339ea37815 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -518,7 +518,7 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port) if (status & UART_MSR_DCTS) { port->icount.cts++; tty = tty_port_tty_get(&port->port); - if (tty && (tty->termios->c_cflag & CRTSCTS)) { + if (tty && (tty->termios.c_cflag & CRTSCTS)) { int cts = (status & UART_MSR_CTS); if (tty->hw_stopped) { if (cts) { @@ -671,12 +671,12 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty) port->ier = UART_IER_RLSI|UART_IER_RDI|UART_IER_RTOIE|UART_IER_UUE; port->mctrl = TIOCM_OUT2; - sdio_uart_change_speed(port, tty->termios, NULL); + sdio_uart_change_speed(port, &tty->termios, NULL); - if (tty->termios->c_cflag & CBAUD) + if (tty->termios.c_cflag & CBAUD) sdio_uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR); - if (tty->termios->c_cflag & CRTSCTS) + if (tty->termios.c_cflag & CRTSCTS) if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS)) tty->hw_stopped = 1; @@ -850,7 +850,7 @@ static void sdio_uart_throttle(struct tty_struct *tty) { struct sdio_uart_port *port = tty->driver_data; - if (!I_IXOFF(tty) && !(tty->termios->c_cflag & CRTSCTS)) + if (!I_IXOFF(tty) && !(tty->termios.c_cflag & CRTSCTS)) return; if (sdio_uart_claim_func(port) != 0) @@ -861,7 +861,7 @@ static void sdio_uart_throttle(struct tty_struct *tty) sdio_uart_start_tx(port); } - if (tty->termios->c_cflag & CRTSCTS) + if (tty->termios.c_cflag & CRTSCTS) sdio_uart_clear_mctrl(port, TIOCM_RTS); sdio_uart_irq(port->func); @@ -872,7 +872,7 @@ static void sdio_uart_unthrottle(struct tty_struct *tty) { struct sdio_uart_port *port = tty->driver_data; - if (!I_IXOFF(tty) && !(tty->termios->c_cflag & CRTSCTS)) + if (!I_IXOFF(tty) && !(tty->termios.c_cflag & CRTSCTS)) return; if (sdio_uart_claim_func(port) != 0) @@ -887,7 +887,7 @@ static void sdio_uart_unthrottle(struct tty_struct *tty) } } - if (tty->termios->c_cflag & CRTSCTS) + if (tty->termios.c_cflag & CRTSCTS) sdio_uart_set_mctrl(port, TIOCM_RTS); sdio_uart_irq(port->func); @@ -898,12 +898,12 @@ static void sdio_uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { struct sdio_uart_port *port = tty->driver_data; - unsigned int cflag = tty->termios->c_cflag; + unsigned int cflag = tty->termios.c_cflag; if (sdio_uart_claim_func(port) != 0) return; - sdio_uart_change_speed(port, tty->termios, old_termios); + sdio_uart_change_speed(port, &tty->termios, old_termios); /* Handle transition to B0 status */ if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) @@ -1132,8 +1132,8 @@ static int sdio_uart_probe(struct sdio_func *func, kfree(port); } else { struct device *dev; - dev = tty_register_device(sdio_uart_tty_driver, - port->index, &func->dev); + dev = tty_port_register_device(&port->port, + sdio_uart_tty_driver, port->index, &func->dev); if (IS_ERR(dev)) { sdio_uart_port_remove(port); ret = PTR_ERR(dev); diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 322412cec4ee..a53c7c478e05 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -81,6 +81,7 @@ struct atmel_mci_caps { bool has_bad_data_ordering; bool need_reset_after_xfer; bool need_blksz_mul_4; + bool need_notbusy_for_read_ops; }; struct atmel_mci_dma { @@ -1625,7 +1626,8 @@ static void atmci_tasklet_func(unsigned long priv) __func__); atmci_set_completed(host, EVENT_XFER_COMPLETE); - if (host->data->flags & MMC_DATA_WRITE) { + if (host->caps.need_notbusy_for_read_ops || + (host->data->flags & MMC_DATA_WRITE)) { atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); state = STATE_WAITING_NOTBUSY; } else if (host->mrq->stop) { @@ -2218,6 +2220,7 @@ static void __init atmci_get_cap(struct atmel_mci *host) host->caps.has_bad_data_ordering = 1; host->caps.need_reset_after_xfer = 1; host->caps.need_blksz_mul_4 = 1; + host->caps.need_notbusy_for_read_ops = 0; /* keep only major version number */ switch (version & 0xf00) { @@ -2238,6 +2241,7 @@ static void __init atmci_get_cap(struct atmel_mci *host) case 0x200: host->caps.has_rwproof = 1; host->caps.need_blksz_mul_4 = 0; + host->caps.need_notbusy_for_read_ops = 1; case 0x100: host->caps.has_bad_data_ordering = 0; host->caps.need_reset_after_xfer = 0; diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c index 03666174ca48..a17dd7363ceb 100644 --- a/drivers/mmc/host/bfin_sdh.c +++ b/drivers/mmc/host/bfin_sdh.c @@ -49,13 +49,6 @@ #define bfin_write_SDH_CFG bfin_write_RSI_CFG #endif -struct dma_desc_array { - unsigned long start_addr; - unsigned short cfg; - unsigned short x_count; - short x_modify; -} __packed; - struct sdh_host { struct mmc_host *mmc; spinlock_t lock; diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 72dc3cde646d..af40d227bece 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -627,6 +627,7 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot) { struct dw_mci *host = slot->host; u32 div; + u32 clk_en_a; if (slot->clock != host->current_speed) { div = host->bus_hz / slot->clock; @@ -659,9 +660,11 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot) mci_send_cmd(slot, SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0); - /* enable clock */ - mci_writel(host, CLKENA, ((SDMMC_CLKEN_ENABLE | - SDMMC_CLKEN_LOW_PWR) << slot->id)); + /* enable clock; only low power if no SDIO */ + clk_en_a = SDMMC_CLKEN_ENABLE << slot->id; + if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id))) + clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id; + mci_writel(host, CLKENA, clk_en_a); /* inform CIU */ mci_send_cmd(slot, @@ -862,6 +865,30 @@ static int dw_mci_get_cd(struct mmc_host *mmc) return present; } +/* + * Disable lower power mode. + * + * Low power mode will stop the card clock when idle. According to the + * description of the CLKENA register we should disable low power mode + * for SDIO cards if we need SDIO interrupts to work. + * + * This function is fast if low power mode is already disabled. + */ +static void dw_mci_disable_low_power(struct dw_mci_slot *slot) +{ + struct dw_mci *host = slot->host; + u32 clk_en_a; + const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id; + + clk_en_a = mci_readl(host, CLKENA); + + if (clk_en_a & clken_low_pwr) { + mci_writel(host, CLKENA, clk_en_a & ~clken_low_pwr); + mci_send_cmd(slot, SDMMC_CMD_UPD_CLK | + SDMMC_CMD_PRV_DAT_WAIT, 0); + } +} + static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb) { struct dw_mci_slot *slot = mmc_priv(mmc); @@ -871,6 +898,14 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb) /* Enable/disable Slot Specific SDIO interrupt */ int_mask = mci_readl(host, INTMASK); if (enb) { + /* + * Turn off low power mode if it was enabled. This is a bit of + * a heavy operation and we disable / enable IRQs a lot, so + * we'll leave low power mode disabled and it will get + * re-enabled again in dw_mci_setup_bus(). + */ + dw_mci_disable_low_power(slot); + mci_writel(host, INTMASK, (int_mask | SDMMC_INT_SDIO(slot->id))); } else { @@ -1429,22 +1464,10 @@ static void dw_mci_read_data_pio(struct dw_mci *host) nbytes += len; remain -= len; } while (remain); - sg_miter->consumed = offset; + sg_miter->consumed = offset; status = mci_readl(host, MINTSTS); mci_writel(host, RINTSTS, SDMMC_INT_RXDR); - if (status & DW_MCI_DATA_ERROR_FLAGS) { - host->data_status = status; - data->bytes_xfered += nbytes; - sg_miter_stop(sg_miter); - host->sg = NULL; - smp_wmb(); - - set_bit(EVENT_DATA_ERROR, &host->pending_events); - - tasklet_schedule(&host->tasklet); - return; - } } while (status & SDMMC_INT_RXDR); /*if the RXDR is ready read again*/ data->bytes_xfered += nbytes; @@ -1497,23 +1520,10 @@ static void dw_mci_write_data_pio(struct dw_mci *host) nbytes += len; remain -= len; } while (remain); - sg_miter->consumed = offset; + sg_miter->consumed = offset; status = mci_readl(host, MINTSTS); mci_writel(host, RINTSTS, SDMMC_INT_TXDR); - if (status & DW_MCI_DATA_ERROR_FLAGS) { - host->data_status = status; - data->bytes_xfered += nbytes; - sg_miter_stop(sg_miter); - host->sg = NULL; - - smp_wmb(); - - set_bit(EVENT_DATA_ERROR, &host->pending_events); - - tasklet_schedule(&host->tasklet); - return; - } } while (status & SDMMC_INT_TXDR); /* if TXDR write again */ data->bytes_xfered += nbytes; @@ -1547,12 +1557,11 @@ static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status) static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) { struct dw_mci *host = dev_id; - u32 status, pending; + u32 pending; unsigned int pass_count = 0; int i; do { - status = mci_readl(host, RINTSTS); pending = mci_readl(host, MINTSTS); /* read-only mask reg */ /* @@ -1570,7 +1579,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & DW_MCI_CMD_ERROR_FLAGS) { mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS); - host->cmd_status = status; + host->cmd_status = pending; smp_wmb(); set_bit(EVENT_CMD_COMPLETE, &host->pending_events); } @@ -1578,18 +1587,16 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & DW_MCI_DATA_ERROR_FLAGS) { /* if there is an error report DATA_ERROR */ mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS); - host->data_status = status; + host->data_status = pending; smp_wmb(); set_bit(EVENT_DATA_ERROR, &host->pending_events); - if (!(pending & (SDMMC_INT_DTO | SDMMC_INT_DCRC | - SDMMC_INT_SBE | SDMMC_INT_EBE))) - tasklet_schedule(&host->tasklet); + tasklet_schedule(&host->tasklet); } if (pending & SDMMC_INT_DATA_OVER) { mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER); if (!host->data_status) - host->data_status = status; + host->data_status = pending; smp_wmb(); if (host->dir_status == DW_MCI_RECV_STATUS) { if (host->sg != NULL) @@ -1613,7 +1620,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & SDMMC_INT_CMD_DONE) { mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE); - dw_mci_cmd_interrupt(host, status); + dw_mci_cmd_interrupt(host, pending); } if (pending & SDMMC_INT_CD) { diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index a51f9309ffbb..ad3fcea1269e 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -285,11 +285,11 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id) writel(stat & MXS_MMC_IRQ_BITS, host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR); + spin_unlock(&host->lock); + if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN)) mmc_signal_sdio_irq(host->mmc); - spin_unlock(&host->lock); - if (stat & BM_SSP_CTRL1_RESP_TIMEOUT_IRQ) cmd->error = -ETIMEDOUT; else if (stat & BM_SSP_CTRL1_RESP_ERR_IRQ) @@ -644,11 +644,6 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET); writel(BM_SSP_CTRL1_SDIO_IRQ_EN, host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_SET); - - if (readl(host->base + HW_SSP_STATUS(host)) & - BM_SSP_STATUS_SDIO_IRQ) - mmc_signal_sdio_irq(host->mmc); - } else { writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK, host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR); @@ -657,6 +652,11 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) } spin_unlock_irqrestore(&host->lock, flags); + + if (enable && readl(host->base + HW_SSP_STATUS(host)) & + BM_SSP_STATUS_SDIO_IRQ) + mmc_signal_sdio_irq(host->mmc); + } static const struct mmc_host_ops mxs_mmc_ops = { diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 50e08f03aa65..87c0293a1eef 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -33,7 +33,6 @@ #include <asm/io.h> #include <asm/irq.h> -#include <plat/board.h> #include <plat/mmc.h> #include <asm/gpio.h> #include <plat/dma.h> @@ -668,7 +667,7 @@ mmc_omap_clk_timer(unsigned long data) static void mmc_omap_xfer_data(struct mmc_omap_host *host, int write) { - int n; + int n, nwords; if (host->buffer_bytes_left == 0) { host->sg_idx++; @@ -678,15 +677,23 @@ mmc_omap_xfer_data(struct mmc_omap_host *host, int write) n = 64; if (n > host->buffer_bytes_left) n = host->buffer_bytes_left; + + nwords = n / 2; + nwords += n & 1; /* handle odd number of bytes to transfer */ + host->buffer_bytes_left -= n; host->total_bytes_left -= n; host->data->bytes_xfered += n; if (write) { - __raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n); + __raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), + host->buffer, nwords); } else { - __raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n); + __raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), + host->buffer, nwords); } + + host->buffer += nwords; } static inline void mmc_omap_report_irq(u16 status) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 3a09f93cc3b6..f871b31ece5a 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -40,7 +40,6 @@ #include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> #include <mach/hardware.h> -#include <plat/board.h> #include <plat/mmc.h> #include <plat/cpu.h> diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h index b97b2f5dafdb..d25f9ab9a54d 100644 --- a/drivers/mmc/host/sdhci-esdhc.h +++ b/drivers/mmc/host/sdhci-esdhc.h @@ -48,14 +48,14 @@ static inline void esdhc_set_clock(struct sdhci_host *host, unsigned int clock) int div = 1; u32 temp; + if (clock == 0) + goto out; + temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK); sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); - if (clock == 0) - goto out; - while (host->max_clk / pre_div / 16 > clock && pre_div < 256) pre_div *= 2; diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index 861ca8f7e47d..78a524b49357 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -23,12 +23,16 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> + #include <asm/io.h> -#include <mach/hardware.h> #include <asm/sizes.h> -#include <linux/gpio.h> + #include <plat/board-ams-delta.h> +#include <mach/hardware.h> + /* * MTD structure for E3 (Delta) */ diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index ac4fd756eda3..27293e328517 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -101,6 +101,16 @@ #define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0) #define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1) +#define PREFETCH_CONFIG1_CS_SHIFT 24 +#define ECC_CONFIG_CS_SHIFT 1 +#define CS_MASK 0x7 +#define ENABLE_PREFETCH (0x1 << 7) +#define DMA_MPU_MODE_SHIFT 2 +#define ECCSIZE1_SHIFT 22 +#define ECC1RESULTSIZE 0x1 +#define ECCCLEAR 0x100 +#define ECC1 0x1 + /* oob info generated runtime depending on ecc algorithm and layout selected */ static struct nand_ecclayout omap_oobinfo; /* Define some generic bad / good block scan pattern which are used @@ -124,15 +134,18 @@ struct omap_nand_info { int gpmc_cs; unsigned long phys_base; + unsigned long mem_size; struct completion comp; struct dma_chan *dma; - int gpmc_irq; + int gpmc_irq_fifo; + int gpmc_irq_count; enum { OMAP_NAND_IO_READ = 0, /* read */ OMAP_NAND_IO_WRITE, /* write */ } iomode; u_char *buf; int buf_len; + struct gpmc_nand_regs reg; #ifdef CONFIG_MTD_NAND_OMAP_BCH struct bch_control *bch; @@ -141,6 +154,63 @@ struct omap_nand_info { }; /** + * omap_prefetch_enable - configures and starts prefetch transfer + * @cs: cs (chip select) number + * @fifo_th: fifo threshold to be used for read/ write + * @dma_mode: dma mode enable (1) or disable (0) + * @u32_count: number of bytes to be transferred + * @is_write: prefetch read(0) or write post(1) mode + */ +static int omap_prefetch_enable(int cs, int fifo_th, int dma_mode, + unsigned int u32_count, int is_write, struct omap_nand_info *info) +{ + u32 val; + + if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) + return -1; + + if (readl(info->reg.gpmc_prefetch_control)) + return -EBUSY; + + /* Set the amount of bytes to be prefetched */ + writel(u32_count, info->reg.gpmc_prefetch_config2); + + /* Set dma/mpu mode, the prefetch read / post write and + * enable the engine. Set which cs is has requested for. + */ + val = ((cs << PREFETCH_CONFIG1_CS_SHIFT) | + PREFETCH_FIFOTHRESHOLD(fifo_th) | ENABLE_PREFETCH | + (dma_mode << DMA_MPU_MODE_SHIFT) | (0x1 & is_write)); + writel(val, info->reg.gpmc_prefetch_config1); + + /* Start the prefetch engine */ + writel(0x1, info->reg.gpmc_prefetch_control); + + return 0; +} + +/** + * omap_prefetch_reset - disables and stops the prefetch engine + */ +static int omap_prefetch_reset(int cs, struct omap_nand_info *info) +{ + u32 config1; + + /* check if the same module/cs is trying to reset */ + config1 = readl(info->reg.gpmc_prefetch_config1); + if (((config1 >> PREFETCH_CONFIG1_CS_SHIFT) & CS_MASK) != cs) + return -EINVAL; + + /* Stop the PFPW engine */ + writel(0x0, info->reg.gpmc_prefetch_control); + + /* Reset/disable the PFPW engine */ + writel(0x0, info->reg.gpmc_prefetch_config1); + + return 0; +} + +/** * omap_hwcontrol - hardware specific access to control-lines * @mtd: MTD device structure * @cmd: command to device @@ -158,13 +228,13 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) if (cmd != NAND_CMD_NONE) { if (ctrl & NAND_CLE) - gpmc_nand_write(info->gpmc_cs, GPMC_NAND_COMMAND, cmd); + writeb(cmd, info->reg.gpmc_nand_command); else if (ctrl & NAND_ALE) - gpmc_nand_write(info->gpmc_cs, GPMC_NAND_ADDRESS, cmd); + writeb(cmd, info->reg.gpmc_nand_address); else /* NAND_NCE */ - gpmc_nand_write(info->gpmc_cs, GPMC_NAND_DATA, cmd); + writeb(cmd, info->reg.gpmc_nand_data); } } @@ -198,7 +268,8 @@ static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len) iowrite8(*p++, info->nand.IO_ADDR_W); /* wait until buffer is available for write */ do { - status = gpmc_read_status(GPMC_STATUS_BUFFER); + status = readl(info->reg.gpmc_status) & + GPMC_STATUS_BUFF_EMPTY; } while (!status); } } @@ -235,7 +306,8 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len) iowrite16(*p++, info->nand.IO_ADDR_W); /* wait until buffer is available for write */ do { - status = gpmc_read_status(GPMC_STATUS_BUFFER); + status = readl(info->reg.gpmc_status) & + GPMC_STATUS_BUFF_EMPTY; } while (!status); } } @@ -265,8 +337,8 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len) } /* configure and start prefetch transfer */ - ret = gpmc_prefetch_enable(info->gpmc_cs, - PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0); + ret = omap_prefetch_enable(info->gpmc_cs, + PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0, info); if (ret) { /* PFPW engine is busy, use cpu copy method */ if (info->nand.options & NAND_BUSWIDTH_16) @@ -275,14 +347,15 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len) omap_read_buf8(mtd, (u_char *)p, len); } else { do { - r_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT); + r_count = readl(info->reg.gpmc_prefetch_status); + r_count = GPMC_PREFETCH_STATUS_FIFO_CNT(r_count); r_count = r_count >> 2; ioread32_rep(info->nand.IO_ADDR_R, p, r_count); p += r_count; len -= r_count << 2; } while (len); /* disable and stop the PFPW engine */ - gpmc_prefetch_reset(info->gpmc_cs); + omap_prefetch_reset(info->gpmc_cs, info); } } @@ -301,6 +374,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd, int i = 0, ret = 0; u16 *p = (u16 *)buf; unsigned long tim, limit; + u32 val; /* take care of subpage writes */ if (len % 2 != 0) { @@ -310,8 +384,8 @@ static void omap_write_buf_pref(struct mtd_info *mtd, } /* configure and start prefetch transfer */ - ret = gpmc_prefetch_enable(info->gpmc_cs, - PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1); + ret = omap_prefetch_enable(info->gpmc_cs, + PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1, info); if (ret) { /* PFPW engine is busy, use cpu copy method */ if (info->nand.options & NAND_BUSWIDTH_16) @@ -320,7 +394,8 @@ static void omap_write_buf_pref(struct mtd_info *mtd, omap_write_buf8(mtd, (u_char *)p, len); } else { while (len) { - w_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT); + w_count = readl(info->reg.gpmc_prefetch_status); + w_count = GPMC_PREFETCH_STATUS_FIFO_CNT(w_count); w_count = w_count >> 1; for (i = 0; (i < w_count) && len; i++, len -= 2) iowrite16(*p++, info->nand.IO_ADDR_W); @@ -329,11 +404,14 @@ static void omap_write_buf_pref(struct mtd_info *mtd, tim = 0; limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS)); - while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit)) + do { cpu_relax(); + val = readl(info->reg.gpmc_prefetch_status); + val = GPMC_PREFETCH_STATUS_COUNT(val); + } while (val && (tim++ < limit)); /* disable and stop the PFPW engine */ - gpmc_prefetch_reset(info->gpmc_cs); + omap_prefetch_reset(info->gpmc_cs, info); } } @@ -365,6 +443,7 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, unsigned long tim, limit; unsigned n; int ret; + u32 val; if (addr >= high_memory) { struct page *p1; @@ -396,9 +475,9 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, tx->callback_param = &info->comp; dmaengine_submit(tx); - /* configure and start prefetch transfer */ - ret = gpmc_prefetch_enable(info->gpmc_cs, - PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write); + /* configure and start prefetch transfer */ + ret = omap_prefetch_enable(info->gpmc_cs, + PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write, info); if (ret) /* PFPW engine is busy, use cpu copy method */ goto out_copy_unmap; @@ -410,11 +489,15 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, wait_for_completion(&info->comp); tim = 0; limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS)); - while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit)) + + do { cpu_relax(); + val = readl(info->reg.gpmc_prefetch_status); + val = GPMC_PREFETCH_STATUS_COUNT(val); + } while (val && (tim++ < limit)); /* disable and stop the PFPW engine */ - gpmc_prefetch_reset(info->gpmc_cs); + omap_prefetch_reset(info->gpmc_cs, info); dma_unmap_sg(info->dma->device->dev, &sg, 1, dir); return 0; @@ -471,13 +554,12 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev) { struct omap_nand_info *info = (struct omap_nand_info *) dev; u32 bytes; - u32 irq_stat; - irq_stat = gpmc_read_status(GPMC_GET_IRQ_STATUS); - bytes = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT); + bytes = readl(info->reg.gpmc_prefetch_status); + bytes = GPMC_PREFETCH_STATUS_FIFO_CNT(bytes); bytes = bytes & 0xFFFC; /* io in multiple of 4 bytes */ if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */ - if (irq_stat & 0x2) + if (this_irq == info->gpmc_irq_count) goto done; if (info->buf_len && (info->buf_len < bytes)) @@ -494,20 +576,17 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev) (u32 *)info->buf, bytes >> 2); info->buf = info->buf + bytes; - if (irq_stat & 0x2) + if (this_irq == info->gpmc_irq_count) goto done; } - gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat); return IRQ_HANDLED; done: complete(&info->comp); - /* disable irq */ - gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ, 0); - /* clear status */ - gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat); + disable_irq_nosync(info->gpmc_irq_fifo); + disable_irq_nosync(info->gpmc_irq_count); return IRQ_HANDLED; } @@ -534,22 +613,22 @@ static void omap_read_buf_irq_pref(struct mtd_info *mtd, u_char *buf, int len) init_completion(&info->comp); /* configure and start prefetch transfer */ - ret = gpmc_prefetch_enable(info->gpmc_cs, - PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0); + ret = omap_prefetch_enable(info->gpmc_cs, + PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0, info); if (ret) /* PFPW engine is busy, use cpu copy method */ goto out_copy; info->buf_len = len; - /* enable irq */ - gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ, - (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT)); + + enable_irq(info->gpmc_irq_count); + enable_irq(info->gpmc_irq_fifo); /* waiting for read to complete */ wait_for_completion(&info->comp); /* disable and stop the PFPW engine */ - gpmc_prefetch_reset(info->gpmc_cs); + omap_prefetch_reset(info->gpmc_cs, info); return; out_copy: @@ -572,6 +651,7 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd, struct omap_nand_info, mtd); int ret = 0; unsigned long tim, limit; + u32 val; if (len <= mtd->oobsize) { omap_write_buf_pref(mtd, buf, len); @@ -583,27 +663,31 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd, init_completion(&info->comp); /* configure and start prefetch transfer : size=24 */ - ret = gpmc_prefetch_enable(info->gpmc_cs, - (PREFETCH_FIFOTHRESHOLD_MAX * 3) / 8, 0x0, len, 0x1); + ret = omap_prefetch_enable(info->gpmc_cs, + (PREFETCH_FIFOTHRESHOLD_MAX * 3) / 8, 0x0, len, 0x1, info); if (ret) /* PFPW engine is busy, use cpu copy method */ goto out_copy; info->buf_len = len; - /* enable irq */ - gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ, - (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT)); + + enable_irq(info->gpmc_irq_count); + enable_irq(info->gpmc_irq_fifo); /* waiting for write to complete */ wait_for_completion(&info->comp); + /* wait for data to flushed-out before reset the prefetch */ tim = 0; limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS)); - while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit)) + do { + val = readl(info->reg.gpmc_prefetch_status); + val = GPMC_PREFETCH_STATUS_COUNT(val); cpu_relax(); + } while (val && (tim++ < limit)); /* disable and stop the PFPW engine */ - gpmc_prefetch_reset(info->gpmc_cs); + omap_prefetch_reset(info->gpmc_cs, info); return; out_copy: @@ -843,7 +927,20 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat, { struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); - return gpmc_calculate_ecc(info->gpmc_cs, dat, ecc_code); + u32 val; + + val = readl(info->reg.gpmc_ecc_config); + if (((val >> ECC_CONFIG_CS_SHIFT) & ~CS_MASK) != info->gpmc_cs) + return -EINVAL; + + /* read ecc result */ + val = readl(info->reg.gpmc_ecc1_result); + *ecc_code++ = val; /* P128e, ..., P1e */ + *ecc_code++ = val >> 16; /* P128o, ..., P1o */ + /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */ + *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0); + + return 0; } /** @@ -857,8 +954,34 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode) mtd); struct nand_chip *chip = mtd->priv; unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0; + u32 val; + + /* clear ecc and enable bits */ + val = ECCCLEAR | ECC1; + writel(val, info->reg.gpmc_ecc_control); + + /* program ecc and result sizes */ + val = ((((info->nand.ecc.size >> 1) - 1) << ECCSIZE1_SHIFT) | + ECC1RESULTSIZE); + writel(val, info->reg.gpmc_ecc_size_config); - gpmc_enable_hwecc(info->gpmc_cs, mode, dev_width, info->nand.ecc.size); + switch (mode) { + case NAND_ECC_READ: + case NAND_ECC_WRITE: + writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control); + break; + case NAND_ECC_READSYN: + writel(ECCCLEAR, info->reg.gpmc_ecc_control); + break; + default: + dev_info(&info->pdev->dev, + "error: unrecognized Mode[%d]!\n", mode); + break; + } + + /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ + val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1); + writel(val, info->reg.gpmc_ecc_config); } /** @@ -886,10 +1009,9 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) else timeo += (HZ * 20) / 1000; - gpmc_nand_write(info->gpmc_cs, - GPMC_NAND_COMMAND, (NAND_CMD_STATUS & 0xFF)); + writeb(NAND_CMD_STATUS & 0xFF, info->reg.gpmc_nand_command); while (time_before(jiffies, timeo)) { - status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA); + status = readb(info->reg.gpmc_nand_data); if (status & NAND_STATUS_READY) break; cond_resched(); @@ -909,22 +1031,13 @@ static int omap_dev_ready(struct mtd_info *mtd) struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); - val = gpmc_read_status(GPMC_GET_IRQ_STATUS); + val = readl(info->reg.gpmc_status); + if ((val & 0x100) == 0x100) { - /* Clear IRQ Interrupt */ - val |= 0x100; - val &= ~(0x0); - gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, val); + return 1; } else { - unsigned int cnt = 0; - while (cnt++ < 0x1FF) { - if ((val & 0x100) == 0x100) - return 0; - val = gpmc_read_status(GPMC_GET_IRQ_STATUS); - } + return 0; } - - return 1; } #ifdef CONFIG_MTD_NAND_OMAP_BCH @@ -1155,6 +1268,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) int i, offset; dma_cap_mask_t mask; unsigned sig; + struct resource *res; pdata = pdev->dev.platform_data; if (pdata == NULL) { @@ -1174,7 +1288,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) info->pdev = pdev; info->gpmc_cs = pdata->cs; - info->phys_base = pdata->phys_base; + info->reg = pdata->reg; info->mtd.priv = &info->nand; info->mtd.name = dev_name(&pdev->dev); @@ -1183,16 +1297,23 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) info->nand.options = pdata->devsize; info->nand.options |= NAND_SKIP_BBTSCAN; - /* NAND write protect off */ - gpmc_cs_configure(info->gpmc_cs, GPMC_CONFIG_WP, 0); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + err = -EINVAL; + dev_err(&pdev->dev, "error getting memory resource\n"); + goto out_free_info; + } + + info->phys_base = res->start; + info->mem_size = resource_size(res); - if (!request_mem_region(info->phys_base, NAND_IO_SIZE, + if (!request_mem_region(info->phys_base, info->mem_size, pdev->dev.driver->name)) { err = -EBUSY; goto out_free_info; } - info->nand.IO_ADDR_R = ioremap(info->phys_base, NAND_IO_SIZE); + info->nand.IO_ADDR_R = ioremap(info->phys_base, info->mem_size); if (!info->nand.IO_ADDR_R) { err = -ENOMEM; goto out_release_mem_region; @@ -1265,17 +1386,39 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) break; case NAND_OMAP_PREFETCH_IRQ: - err = request_irq(pdata->gpmc_irq, - omap_nand_irq, IRQF_SHARED, "gpmc-nand", info); + info->gpmc_irq_fifo = platform_get_irq(pdev, 0); + if (info->gpmc_irq_fifo <= 0) { + dev_err(&pdev->dev, "error getting fifo irq\n"); + err = -ENODEV; + goto out_release_mem_region; + } + err = request_irq(info->gpmc_irq_fifo, omap_nand_irq, + IRQF_SHARED, "gpmc-nand-fifo", info); if (err) { dev_err(&pdev->dev, "requesting irq(%d) error:%d", - pdata->gpmc_irq, err); + info->gpmc_irq_fifo, err); + info->gpmc_irq_fifo = 0; + goto out_release_mem_region; + } + + info->gpmc_irq_count = platform_get_irq(pdev, 1); + if (info->gpmc_irq_count <= 0) { + dev_err(&pdev->dev, "error getting count irq\n"); + err = -ENODEV; + goto out_release_mem_region; + } + err = request_irq(info->gpmc_irq_count, omap_nand_irq, + IRQF_SHARED, "gpmc-nand-count", info); + if (err) { + dev_err(&pdev->dev, "requesting irq(%d) error:%d", + info->gpmc_irq_count, err); + info->gpmc_irq_count = 0; goto out_release_mem_region; - } else { - info->gpmc_irq = pdata->gpmc_irq; - info->nand.read_buf = omap_read_buf_irq_pref; - info->nand.write_buf = omap_write_buf_irq_pref; } + + info->nand.read_buf = omap_read_buf_irq_pref; + info->nand.write_buf = omap_write_buf_irq_pref; + break; default: @@ -1363,7 +1506,11 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) out_release_mem_region: if (info->dma) dma_release_channel(info->dma); - release_mem_region(info->phys_base, NAND_IO_SIZE); + if (info->gpmc_irq_count > 0) + free_irq(info->gpmc_irq_count, info); + if (info->gpmc_irq_fifo > 0) + free_irq(info->gpmc_irq_fifo, info); + release_mem_region(info->phys_base, info->mem_size); out_free_info: kfree(info); @@ -1381,8 +1528,10 @@ static int omap_nand_remove(struct platform_device *pdev) if (info->dma) dma_release_channel(info->dma); - if (info->gpmc_irq) - free_irq(info->gpmc_irq, info); + if (info->gpmc_irq_count > 0) + free_irq(info->gpmc_irq_count, info); + if (info->gpmc_irq_fifo > 0) + free_irq(info->gpmc_irq_fifo, info); /* Release NAND device, its internal structures and partitions */ nand_release(&info->mtd); diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 398a82783848..9d49b1f4ff53 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -43,18 +43,17 @@ #include <asm/gpio.h> #include <plat/dma.h> - -#include <plat/board.h> +#include <plat/cpu.h> #define DRIVER_NAME "omap2-onenand" -#define ONENAND_IO_SIZE SZ_128K #define ONENAND_BUFRAM_SIZE (1024 * 5) struct omap2_onenand { struct platform_device *pdev; int gpmc_cs; unsigned long phys_base; + unsigned int mem_size; int gpio_irq; struct mtd_info mtd; struct onenand_chip onenand; @@ -626,6 +625,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) struct omap2_onenand *c; struct onenand_chip *this; int r; + struct resource *res; pdata = pdev->dev.platform_data; if (pdata == NULL) { @@ -647,20 +647,24 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) c->gpio_irq = 0; } - r = gpmc_cs_request(c->gpmc_cs, ONENAND_IO_SIZE, &c->phys_base); - if (r < 0) { - dev_err(&pdev->dev, "Cannot request GPMC CS\n"); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + r = -EINVAL; + dev_err(&pdev->dev, "error getting memory resource\n"); goto err_kfree; } - if (request_mem_region(c->phys_base, ONENAND_IO_SIZE, + c->phys_base = res->start; + c->mem_size = resource_size(res); + + if (request_mem_region(c->phys_base, c->mem_size, pdev->dev.driver->name) == NULL) { - dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, " - "size: 0x%x\n", c->phys_base, ONENAND_IO_SIZE); + dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, size: 0x%x\n", + c->phys_base, c->mem_size); r = -EBUSY; - goto err_free_cs; + goto err_kfree; } - c->onenand.base = ioremap(c->phys_base, ONENAND_IO_SIZE); + c->onenand.base = ioremap(c->phys_base, c->mem_size); if (c->onenand.base == NULL) { r = -ENOMEM; goto err_release_mem_region; @@ -776,9 +780,7 @@ err_release_gpio: err_iounmap: iounmap(c->onenand.base); err_release_mem_region: - release_mem_region(c->phys_base, ONENAND_IO_SIZE); -err_free_cs: - gpmc_cs_free(c->gpmc_cs); + release_mem_region(c->phys_base, c->mem_size); err_kfree: kfree(c); @@ -800,7 +802,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev) gpio_free(c->gpio_irq); } iounmap(c->onenand.base); - release_mem_region(c->phys_base, ONENAND_IO_SIZE); + release_mem_region(c->phys_base, c->mem_size); gpmc_cs_free(c->gpmc_cs); kfree(c); diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c index 437bc193e170..568307cc7caf 100644 --- a/drivers/mtd/ubi/vtbl.c +++ b/drivers/mtd/ubi/vtbl.c @@ -340,7 +340,7 @@ retry: * of this LEB as it will be deleted and freed in 'ubi_add_to_av()'. */ err = ubi_add_to_av(ubi, ai, new_aeb->pnum, new_aeb->ec, vid_hdr, 0); - kfree(new_aeb); + kmem_cache_free(ai->aeb_slab_cache, new_aeb); ubi_free_vid_hdr(ubi, vid_hdr); return err; @@ -353,7 +353,7 @@ write_error: list_add(&new_aeb->u.list, &ai->erase); goto retry; } - kfree(new_aeb); + kmem_cache_free(ai->aeb_slab_cache, new_aeb); out_free: ubi_free_vid_hdr(ubi, vid_hdr); return err; diff --git a/drivers/net/can/sja1000/sja1000_platform.c b/drivers/net/can/sja1000/sja1000_platform.c index 4f50145f6483..662c5f7eb0c5 100644 --- a/drivers/net/can/sja1000/sja1000_platform.c +++ b/drivers/net/can/sja1000/sja1000_platform.c @@ -109,7 +109,9 @@ static int sp_probe(struct platform_device *pdev) priv = netdev_priv(dev); dev->irq = res_irq->start; - priv->irq_flags = res_irq->flags & (IRQF_TRIGGER_MASK | IRQF_SHARED); + priv->irq_flags = res_irq->flags & IRQF_TRIGGER_MASK; + if (res_irq->flags & IORESOURCE_IRQ_SHAREABLE) + priv->irq_flags |= IRQF_SHARED; priv->reg_base = addr; /* The CAN clock frequency is half the oscillator clock frequency */ priv->can.clock.freq = pdata->osc_freq / 2; diff --git a/drivers/net/can/softing/softing_fw.c b/drivers/net/can/softing/softing_fw.c index 310596175676..b595d3422b9f 100644 --- a/drivers/net/can/softing/softing_fw.c +++ b/drivers/net/can/softing/softing_fw.c @@ -150,7 +150,7 @@ int softing_load_fw(const char *file, struct softing *card, const uint8_t *mem, *end, *dat; uint16_t type, len; uint32_t addr; - uint8_t *buf = NULL; + uint8_t *buf = NULL, *new_buf; int buflen = 0; int8_t type_end = 0; @@ -199,11 +199,12 @@ int softing_load_fw(const char *file, struct softing *card, if (len > buflen) { /* align buflen */ buflen = (len + (1024-1)) & ~(1024-1); - buf = krealloc(buf, buflen, GFP_KERNEL); - if (!buf) { + new_buf = krealloc(buf, buflen, GFP_KERNEL); + if (!new_buf) { ret = -ENOMEM; goto failed; } + buf = new_buf; } /* verify record data */ memcpy_fromio(buf, &dpram[addr + offset], len); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 463b9ec57d80..6d1a24acb77e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1708,9 +1708,6 @@ struct bnx2x_func_init_params { continue; \ else -#define for_each_napi_rx_queue(bp, var) \ - for ((var) = 0; (var) < bp->num_napi_queues; (var)++) - /* Skip OOO FP */ #define for_each_tx_queue(bp, var) \ for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index e879e19eb0d6..af20c6ee2cd9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2046,6 +2046,8 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) */ bnx2x_setup_tc(bp->dev, bp->max_cos); + /* Add all NAPI objects */ + bnx2x_add_all_napi(bp); bnx2x_napi_enable(bp); /* set pf load just before approaching the MCP */ @@ -2408,6 +2410,8 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) /* Disable HW interrupts, NAPI */ bnx2x_netif_stop(bp, 1); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); /* Release IRQs */ bnx2x_free_irq(bp); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index dfa757e74296..21b553229ea4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -792,7 +792,7 @@ static inline void bnx2x_add_all_napi(struct bnx2x *bp) bp->num_napi_queues = bp->num_queues; /* Add NAPI objects */ - for_each_napi_rx_queue(bp, i) + for_each_rx_queue(bp, i) netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi), bnx2x_poll, BNX2X_NAPI_WEIGHT); } @@ -801,7 +801,7 @@ static inline void bnx2x_del_all_napi(struct bnx2x *bp) { int i; - for_each_napi_rx_queue(bp, i) + for_each_rx_queue(bp, i) netif_napi_del(&bnx2x_fp(bp, i, napi)); } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index fc4e0e3885b0..c37a68d68090 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -2888,11 +2888,9 @@ static void bnx2x_get_channels(struct net_device *dev, */ static void bnx2x_change_num_queues(struct bnx2x *bp, int num_rss) { - bnx2x_del_all_napi(bp); bnx2x_disable_msi(bp); BNX2X_NUM_QUEUES(bp) = num_rss + NON_ETH_CONTEXT_USE; bnx2x_set_int_mode(bp); - bnx2x_add_all_napi(bp); } /** diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 02b5a343b195..21054987257a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -8427,6 +8427,8 @@ unload_error: /* Disable HW interrupts, NAPI */ bnx2x_netif_stop(bp, 1); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); /* Release IRQs */ bnx2x_free_irq(bp); @@ -11229,10 +11231,12 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) static void poll_bnx2x(struct net_device *dev) { struct bnx2x *bp = netdev_priv(dev); + int i; - disable_irq(bp->pdev->irq); - bnx2x_interrupt(bp->pdev->irq, dev); - enable_irq(bp->pdev->irq); + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + napi_schedule(&bnx2x_fp(bp, fp->index, napi)); + } } #endif @@ -11899,9 +11903,6 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, */ bnx2x_set_int_mode(bp); - /* Add all NAPI objects */ - bnx2x_add_all_napi(bp); - rc = register_netdev(dev); if (rc) { dev_err(&pdev->dev, "Cannot register net device\n"); @@ -11976,9 +11977,6 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev) unregister_netdev(dev); - /* Delete all NAPI objects */ - bnx2x_del_all_napi(bp); - /* Power on: we can't let PCI layer write to us while we are in D3 */ bnx2x_set_power_state(bp, PCI_D0); @@ -12025,6 +12023,8 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp) bnx2x_tx_disable(bp); bnx2x_netif_stop(bp, 0); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); del_timer_sync(&bp->timer); diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c index 845b2020f291..138446957786 100644 --- a/drivers/net/ethernet/cirrus/cs89x0.c +++ b/drivers/net/ethernet/cirrus/cs89x0.c @@ -1243,6 +1243,7 @@ static void set_multicast_list(struct net_device *dev) { struct net_local *lp = netdev_priv(dev); unsigned long flags; + u16 cfg; spin_lock_irqsave(&lp->lock, flags); if (dev->flags & IFF_PROMISC) @@ -1260,11 +1261,10 @@ static void set_multicast_list(struct net_device *dev) /* in promiscuous mode, we accept errored packets, * so we have to enable interrupts on them also */ - writereg(dev, PP_RxCFG, - (lp->curr_rx_cfg | - (lp->rx_mode == RX_ALL_ACCEPT) - ? (RX_CRC_ERROR_ENBL | RX_RUNT_ENBL | RX_EXTRA_DATA_ENBL) - : 0)); + cfg = lp->curr_rx_cfg; + if (lp->rx_mode == RX_ALL_ACCEPT) + cfg |= RX_CRC_ERROR_ENBL | RX_RUNT_ENBL | RX_EXTRA_DATA_ENBL; + writereg(dev, PP_RxCFG, cfg); spin_unlock_irqrestore(&lp->lock, flags); } diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 7fac97b4bb59..8c63d06ab12b 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -259,7 +259,7 @@ int be_process_mcc(struct be_adapter *adapter) int num = 0, status = 0; struct be_mcc_obj *mcc_obj = &adapter->mcc_obj; - spin_lock_bh(&adapter->mcc_cq_lock); + spin_lock(&adapter->mcc_cq_lock); while ((compl = be_mcc_compl_get(adapter))) { if (compl->flags & CQE_FLAGS_ASYNC_MASK) { /* Interpret flags as an async trailer */ @@ -280,7 +280,7 @@ int be_process_mcc(struct be_adapter *adapter) if (num) be_cq_notify(adapter, mcc_obj->cq.id, mcc_obj->rearm_cq, num); - spin_unlock_bh(&adapter->mcc_cq_lock); + spin_unlock(&adapter->mcc_cq_lock); return status; } @@ -295,7 +295,9 @@ static int be_mcc_wait_compl(struct be_adapter *adapter) if (be_error(adapter)) return -EIO; + local_bh_disable(); status = be_process_mcc(adapter); + local_bh_enable(); if (atomic_read(&mcc_obj->q.used) == 0) break; diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 90a903d83d87..78b8aa8069f0 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -3763,7 +3763,9 @@ static void be_worker(struct work_struct *work) /* when interrupts are not yet enabled, just reap any pending * mcc completions */ if (!netif_running(adapter->netdev)) { + local_bh_disable(); be_process_mcc(adapter); + local_bh_enable(); goto reschedule; } diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 4605f7246687..d3233f59a82e 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -1041,7 +1041,7 @@ static int gfar_probe(struct platform_device *ofdev) if (priv->device_flags & FSL_GIANFAR_DEV_HAS_VLAN) { dev->hw_features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; - dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + dev->features |= NETIF_F_HW_VLAN_RX; } if (priv->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) { diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index cd153326c3cf..cb3356c9af80 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -310,6 +310,7 @@ struct e1000_adapter { */ struct e1000_ring *tx_ring /* One per active queue */ ____cacheline_aligned_in_smp; + u32 tx_fifo_limit; struct napi_struct napi; diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 46c3b1f9ff89..d01a099475a1 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3517,6 +3517,15 @@ void e1000e_reset(struct e1000_adapter *adapter) } /* + * Alignment of Tx data is on an arbitrary byte boundary with the + * maximum size per Tx descriptor limited only to the transmit + * allocation of the packet buffer minus 96 bytes with an upper + * limit of 24KB due to receive synchronization limitations. + */ + adapter->tx_fifo_limit = min_t(u32, ((er32(PBA) >> 16) << 10) - 96, + 24 << 10); + + /* * Disable Adaptive Interrupt Moderation if 2 full packets cannot * fit in receive buffer. */ @@ -4785,12 +4794,9 @@ static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb) return 1; } -#define E1000_MAX_PER_TXD 8192 -#define E1000_MAX_TXD_PWR 12 - static int e1000_tx_map(struct e1000_ring *tx_ring, struct sk_buff *skb, unsigned int first, unsigned int max_per_txd, - unsigned int nr_frags, unsigned int mss) + unsigned int nr_frags) { struct e1000_adapter *adapter = tx_ring->adapter; struct pci_dev *pdev = adapter->pdev; @@ -5023,20 +5029,19 @@ static int __e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size) static int e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size) { + BUG_ON(size > tx_ring->count); + if (e1000_desc_unused(tx_ring) >= size) return 0; return __e1000_maybe_stop_tx(tx_ring, size); } -#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1) static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_ring *tx_ring = adapter->tx_ring; unsigned int first; - unsigned int max_per_txd = E1000_MAX_PER_TXD; - unsigned int max_txd_pwr = E1000_MAX_TXD_PWR; unsigned int tx_flags = 0; unsigned int len = skb_headlen(skb); unsigned int nr_frags; @@ -5056,18 +5061,8 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, } mss = skb_shinfo(skb)->gso_size; - /* - * The controller does a simple calculation to - * make sure there is enough room in the FIFO before - * initiating the DMA for each buffer. The calc is: - * 4 = ceil(buffer len/mss). To make sure we don't - * overrun the FIFO, adjust the max buffer len if mss - * drops. - */ if (mss) { u8 hdr_len; - max_per_txd = min(mss << 2, max_per_txd); - max_txd_pwr = fls(max_per_txd) - 1; /* * TSO Workaround for 82571/2/3 Controllers -- if skb->data @@ -5097,12 +5092,12 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, count++; count++; - count += TXD_USE_COUNT(len, max_txd_pwr); + count += DIV_ROUND_UP(len, adapter->tx_fifo_limit); nr_frags = skb_shinfo(skb)->nr_frags; for (f = 0; f < nr_frags; f++) - count += TXD_USE_COUNT(skb_frag_size(&skb_shinfo(skb)->frags[f]), - max_txd_pwr); + count += DIV_ROUND_UP(skb_frag_size(&skb_shinfo(skb)->frags[f]), + adapter->tx_fifo_limit); if (adapter->hw.mac.tx_pkt_filtering) e1000_transfer_dhcp_info(adapter, skb); @@ -5144,15 +5139,18 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, tx_flags |= E1000_TX_FLAGS_NO_FCS; /* if count is 0 then mapping error has occurred */ - count = e1000_tx_map(tx_ring, skb, first, max_per_txd, nr_frags, mss); + count = e1000_tx_map(tx_ring, skb, first, adapter->tx_fifo_limit, + nr_frags); if (count) { skb_tx_timestamp(skb); netdev_sent_queue(netdev, skb->len); e1000_tx_queue(tx_ring, tx_flags, count); /* Make sure there is space in the ring for the next send. */ - e1000_maybe_stop_tx(tx_ring, MAX_SKB_FRAGS + 2); - + e1000_maybe_stop_tx(tx_ring, + (MAX_SKB_FRAGS * + DIV_ROUND_UP(PAGE_SIZE, + adapter->tx_fifo_limit) + 2)); } else { dev_kfree_skb_any(skb); tx_ring->buffer_info[first].time_stamp = 0; @@ -6327,8 +6325,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->hw.phy.autoneg_advertised = 0x2f; /* ring size defaults */ - adapter->rx_ring->count = 256; - adapter->tx_ring->count = 256; + adapter->rx_ring->count = E1000_DEFAULT_RXD; + adapter->tx_ring->count = E1000_DEFAULT_TXD; /* * Initial Wake on LAN setting - If APM wake is enabled in diff --git a/drivers/net/ethernet/sfc/ethtool.c b/drivers/net/ethernet/sfc/ethtool.c index 8cba2df82b18..5faedd855b77 100644 --- a/drivers/net/ethernet/sfc/ethtool.c +++ b/drivers/net/ethernet/sfc/ethtool.c @@ -863,8 +863,8 @@ static int efx_ethtool_get_class_rule(struct efx_nic *efx, &ip_entry->ip4dst, &ip_entry->pdst); if (rc != 0) { rc = efx_filter_get_ipv4_full( - &spec, &proto, &ip_entry->ip4src, &ip_entry->psrc, - &ip_entry->ip4dst, &ip_entry->pdst); + &spec, &proto, &ip_entry->ip4dst, &ip_entry->pdst, + &ip_entry->ip4src, &ip_entry->psrc); EFX_WARN_ON_PARANOID(rc); ip_mask->ip4src = ~0; ip_mask->psrc = ~0; diff --git a/drivers/net/ethernet/sgi/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c index b5ba3084c7fc..3e5519a0acc7 100644 --- a/drivers/net/ethernet/sgi/ioc3-eth.c +++ b/drivers/net/ethernet/sgi/ioc3-eth.c @@ -1147,15 +1147,17 @@ static void __devinit ioc3_8250_register(struct ioc3_uartregs __iomem *uart) { #define COSMISC_CONSTANT 6 - struct uart_port port = { - .irq = 0, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 0, - .uartclk = (22000000 << 1) / COSMISC_CONSTANT, - - .membase = (unsigned char __iomem *) uart, - .mapbase = (unsigned long) uart, + struct uart_8250_port port = { + .port = { + .irq = 0, + .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = (22000000 << 1) / COSMISC_CONSTANT, + + .membase = (unsigned char __iomem *) uart, + .mapbase = (unsigned long) uart, + } }; unsigned char lcr; @@ -1164,7 +1166,7 @@ static void __devinit ioc3_8250_register(struct ioc3_uartregs __iomem *uart) uart->iu_scr = COSMISC_CONSTANT, uart->iu_lcr = lcr; uart->iu_lcr; - serial8250_register_port(&port); + serial8250_register_8250_port(&port); } static void __devinit ioc3_serial_probe(struct pci_dev *pdev, struct ioc3 *ioc3) diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index e2d083228f3a..719be3912aa9 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -22,6 +22,9 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ +#ifndef __COMMON_H__ +#define __COMMON_H__ + #include <linux/etherdevice.h> #include <linux/netdevice.h> #include <linux/phy.h> @@ -366,3 +369,5 @@ extern void stmmac_set_mac(void __iomem *ioaddr, bool enable); extern void dwmac_dma_flush_tx_fifo(void __iomem *ioaddr); extern const struct stmmac_ring_mode_ops ring_mode_ops; + +#endif /* __COMMON_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/descs.h b/drivers/net/ethernet/stmicro/stmmac/descs.h index 9820ec842cc0..223adf95fd03 100644 --- a/drivers/net/ethernet/stmicro/stmmac/descs.h +++ b/drivers/net/ethernet/stmicro/stmmac/descs.h @@ -20,6 +20,10 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ + +#ifndef __DESCS_H__ +#define __DESCS_H__ + struct dma_desc { /* Receive descriptor */ union { @@ -166,3 +170,5 @@ enum tdes_csum_insertion { * is not calculated */ cic_full = 3, /* IP header and pseudoheader */ }; + +#endif /* __DESCS_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/descs_com.h b/drivers/net/ethernet/stmicro/stmmac/descs_com.h index dd8d6e19dff6..7ee9499a6e38 100644 --- a/drivers/net/ethernet/stmicro/stmmac/descs_com.h +++ b/drivers/net/ethernet/stmicro/stmmac/descs_com.h @@ -27,6 +27,9 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ +#ifndef __DESC_COM_H__ +#define __DESC_COM_H__ + #if defined(CONFIG_STMMAC_RING) static inline void ehn_desc_rx_set_on_ring_chain(struct dma_desc *p, int end) { @@ -124,3 +127,5 @@ static inline void norm_set_tx_desc_len(struct dma_desc *p, int len) p->des01.tx.buffer1_size = len; } #endif + +#endif /* __DESC_COM_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100.h b/drivers/net/ethernet/stmicro/stmmac/dwmac100.h index 7c6d857a9cc7..2ec6aeae349e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100.h @@ -22,6 +22,9 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ +#ifndef __DWMAC100_H__ +#define __DWMAC100_H__ + #include <linux/phy.h> #include "common.h" @@ -119,3 +122,5 @@ enum ttc_control { #define DMA_MISSED_FRAME_M_CNTR 0x0000ffff /* Missed Frame Couinter */ extern const struct stmmac_dma_ops dwmac100_dma_ops; + +#endif /* __DWMAC100_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h index f90fcb5f9573..0e4cacedc1f0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h @@ -19,6 +19,8 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ +#ifndef __DWMAC1000_H__ +#define __DWMAC1000_H__ #include <linux/phy.h> #include "common.h" @@ -229,6 +231,7 @@ enum rtc_control { #define GMAC_MMC_RX_CSUM_OFFLOAD 0x208 /* Synopsys Core versions */ -#define DWMAC_CORE_3_40 34 +#define DWMAC_CORE_3_40 0x34 extern const struct stmmac_dma_ops dwmac1000_dma_ops; +#endif /* __DWMAC1000_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h index e678ce39d014..e49c9a0fd6ff 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h @@ -22,6 +22,9 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ +#ifndef __DWMAC_DMA_H__ +#define __DWMAC_DMA_H__ + /* DMA CRS Control and Status Register Mapping */ #define DMA_BUS_MODE 0x00001000 /* Bus Mode */ #define DMA_XMT_POLL_DEMAND 0x00001004 /* Transmit Poll Demand */ @@ -109,3 +112,5 @@ extern void dwmac_dma_start_rx(void __iomem *ioaddr); extern void dwmac_dma_stop_rx(void __iomem *ioaddr); extern int dwmac_dma_interrupt(void __iomem *ioaddr, struct stmmac_extra_stats *x); + +#endif /* __DWMAC_DMA_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc.h b/drivers/net/ethernet/stmicro/stmmac/mmc.h index a38352024cb8..67995ef25251 100644 --- a/drivers/net/ethernet/stmicro/stmmac/mmc.h +++ b/drivers/net/ethernet/stmicro/stmmac/mmc.h @@ -22,6 +22,9 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ +#ifndef __MMC_H__ +#define __MMC_H__ + /* MMC control register */ /* When set, all counter are reset */ #define MMC_CNTRL_COUNTER_RESET 0x1 @@ -129,3 +132,5 @@ struct stmmac_counters { extern void dwmac_mmc_ctrl(void __iomem *ioaddr, unsigned int mode); extern void dwmac_mmc_intr_all_mask(void __iomem *ioaddr); extern void dwmac_mmc_read(void __iomem *ioaddr, struct stmmac_counters *mmc); + +#endif /* __MMC_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c index c07cfe989f6e..0c74a702d461 100644 --- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c @@ -33,7 +33,7 @@ #define MMC_TX_INTR 0x00000108 /* MMC TX Interrupt */ #define MMC_RX_INTR_MASK 0x0000010c /* MMC Interrupt Mask */ #define MMC_TX_INTR_MASK 0x00000110 /* MMC Interrupt Mask */ -#define MMC_DEFAUL_MASK 0xffffffff +#define MMC_DEFAULT_MASK 0xffffffff /* MMC TX counter registers */ @@ -147,8 +147,8 @@ void dwmac_mmc_ctrl(void __iomem *ioaddr, unsigned int mode) /* To mask all all interrupts.*/ void dwmac_mmc_intr_all_mask(void __iomem *ioaddr) { - writel(MMC_DEFAUL_MASK, ioaddr + MMC_RX_INTR_MASK); - writel(MMC_DEFAUL_MASK, ioaddr + MMC_TX_INTR_MASK); + writel(MMC_DEFAULT_MASK, ioaddr + MMC_RX_INTR_MASK); + writel(MMC_DEFAULT_MASK, ioaddr + MMC_TX_INTR_MASK); } /* This reads the MAC core counters (if actaully supported). diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index f2d3665430ad..e872e1da3137 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -20,6 +20,9 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ +#ifndef __STMMAC_H__ +#define __STMMAC_H__ + #define STMMAC_RESOURCE_NAME "stmmaceth" #define DRV_MODULE_VERSION "March_2012" @@ -166,3 +169,5 @@ static inline void stmmac_unregister_pci(void) { } #endif /* CONFIG_STMMAC_PCI */ + +#endif /* __STMMAC_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h index 6863590d184b..aea9b14cdfbe 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h @@ -21,6 +21,8 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ +#ifndef __STMMAC_TIMER_H__ +#define __STMMAC_TIMER_H__ struct stmmac_timer { void (*timer_start) (unsigned int new_freq); @@ -40,3 +42,5 @@ void stmmac_schedule(struct net_device *dev); extern int tmu2_register_user(void *fnt, void *data); extern void tmu2_unregister_user(void); #endif + +#endif /* __STMMAC_TIMER_H__ */ diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index cd7ee204e94a..a9ca4a03d31b 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -394,8 +394,10 @@ static int __devexit davinci_mdio_remove(struct platform_device *pdev) struct device *dev = &pdev->dev; struct davinci_mdio_data *data = dev_get_drvdata(dev); - if (data->bus) + if (data->bus) { + mdiobus_unregister(data->bus); mdiobus_free(data->bus); + } if (data->clk) clk_put(data->clk); diff --git a/drivers/net/fddi/skfp/pmf.c b/drivers/net/fddi/skfp/pmf.c index 24d8566cfd8b..441b4dc79450 100644 --- a/drivers/net/fddi/skfp/pmf.c +++ b/drivers/net/fddi/skfp/pmf.c @@ -673,7 +673,7 @@ void smt_add_para(struct s_smc *smc, struct s_pcon *pcon, u_short para, sm_pm_get_ls(smc,port_to_mib(smc,port))) ; break ; case SMT_P_REASON : - * (u_long *) to = 0 ; + *(u32 *)to = 0 ; sp_len = 4 ; goto sp_done ; case SMT_P1033 : /* time stamp */ diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c index 3352b2443e58..30087ca23a0f 100644 --- a/drivers/net/irda/irtty-sir.c +++ b/drivers/net/irda/irtty-sir.c @@ -124,8 +124,8 @@ static int irtty_change_speed(struct sir_dev *dev, unsigned speed) tty = priv->tty; mutex_lock(&tty->termios_mutex); - old_termios = *(tty->termios); - cflag = tty->termios->c_cflag; + old_termios = tty->termios; + cflag = tty->termios.c_cflag; tty_encode_baud_rate(tty, speed, speed); if (tty->ops->set_termios) tty->ops->set_termios(tty, &old_termios); @@ -281,15 +281,15 @@ static inline void irtty_stop_receiver(struct tty_struct *tty, int stop) int cflag; mutex_lock(&tty->termios_mutex); - old_termios = *(tty->termios); - cflag = tty->termios->c_cflag; + old_termios = tty->termios; + cflag = tty->termios.c_cflag; if (stop) cflag &= ~CREAD; else cflag |= CREAD; - tty->termios->c_cflag = cflag; + tty->termios.c_cflag = cflag; if (tty->ops->set_termios) tty->ops->set_termios(tty, &old_termios); mutex_unlock(&tty->termios_mutex); diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 62f30b46fa42..605a4baa9b7b 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1107,7 +1107,6 @@ static void _hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old) { struct hso_serial *serial = tty->driver_data; - struct ktermios *termios; if (!serial) { printk(KERN_ERR "%s: no tty structures", __func__); @@ -1119,16 +1118,15 @@ static void _hso_serial_set_termios(struct tty_struct *tty, /* * Fix up unsupported bits */ - termios = tty->termios; - termios->c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */ + tty->termios.c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */ - termios->c_cflag &= + tty->termios.c_cflag &= ~(CSIZE /* no size */ | PARENB /* disable parity bit */ | CBAUD /* clear current baud rate */ | CBAUDEX); /* clear current buad rate */ - termios->c_cflag |= CS8; /* character size 8 bits */ + tty->termios.c_cflag |= CS8; /* character size 8 bits */ /* baud rate 115200 */ tty_encode_baud_rate(tty, 115200, 115200); @@ -1425,14 +1423,14 @@ static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old) if (old) D5("Termios called with: cflags new[%d] - old[%d]", - tty->termios->c_cflag, old->c_cflag); + tty->termios.c_cflag, old->c_cflag); /* the actual setup */ spin_lock_irqsave(&serial->serial_lock, flags); if (serial->port.count) _hso_serial_set_termios(tty, old); else - tty->termios = old; + tty->termios = *old; spin_unlock_irqrestore(&serial->serial_lock, flags); /* done */ @@ -2289,9 +2287,11 @@ static int hso_serial_common_create(struct hso_serial *serial, int num_urbs, if (minor < 0) goto exit; + tty_port_init(&serial->port); + /* register our minor number */ - serial->parent->dev = tty_register_device(tty_drv, minor, - &serial->parent->interface->dev); + serial->parent->dev = tty_port_register_device(&serial->port, tty_drv, + minor, &serial->parent->interface->dev); dev = serial->parent->dev; dev_set_drvdata(dev, serial->parent); i = device_create_file(dev, &dev_attr_hsotype); @@ -2300,7 +2300,6 @@ static int hso_serial_common_create(struct hso_serial *serial, int num_urbs, serial->minor = minor; serial->magic = HSO_SERIAL_MAGIC; spin_lock_init(&serial->serial_lock); - tty_port_init(&serial->port); serial->num_rx_urbs = num_urbs; /* RX, allocate urb and initialize */ diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 328397c66730..adfab3fc5478 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -413,7 +413,9 @@ static const struct usb_device_id products[] = { /* 5. Gobi 2000 and 3000 devices */ {QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */ + {QMI_GOBI_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */ {QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */ + {QMI_GOBI_DEVICE(0x05c6, 0x920d)}, /* Gobi 3000 Composite */ {QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */ {QMI_GOBI_DEVICE(0x05c6, 0x9245)}, /* Samsung Gobi 2000 Modem device (VL176) */ {QMI_GOBI_DEVICE(0x03f0, 0x251d)}, /* HP Gobi 2000 Modem device (VP412) */ @@ -441,6 +443,8 @@ static const struct usb_device_id products[] = { {QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ + {QMI_GOBI_DEVICE(0x12d1, 0x14f1)}, /* Sony Gobi 3000 Composite */ + {QMI_GOBI_DEVICE(0x1410, 0xa021)}, /* Foxconn Gobi 3000 Modem device (Novatel E396) */ { } /* END */ }; diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 8531c1caac28..fd4b26d46fd5 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1573,7 +1573,7 @@ int usbnet_resume (struct usb_interface *intf) netif_device_present(dev->net) && !timer_pending(&dev->delay) && !test_bit(EVENT_RX_HALT, &dev->flags)) - rx_alloc_submit(dev, GFP_KERNEL); + rx_alloc_submit(dev, GFP_NOIO); if (!(dev->txq.qlen >= TX_QLEN(dev))) netif_tx_wake_all_queues(dev->net); diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 4026c906cc7b..b7e0258887e7 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -1482,7 +1482,7 @@ ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) case AR5K_EEPROM_MODE_11A: offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version); rate_pcal_info = ee->ee_rate_tpwr_a; - ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_CHAN; + ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_RATE_CHAN; break; case AR5K_EEPROM_MODE_11B: offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version); diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h index dc2bcfeadeb4..94a9bbea6874 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.h +++ b/drivers/net/wireless/ath/ath5k/eeprom.h @@ -182,6 +182,7 @@ #define AR5K_EEPROM_EEP_DELTA 10 #define AR5K_EEPROM_N_MODES 3 #define AR5K_EEPROM_N_5GHZ_CHAN 10 +#define AR5K_EEPROM_N_5GHZ_RATE_CHAN 8 #define AR5K_EEPROM_N_2GHZ_CHAN 3 #define AR5K_EEPROM_N_2GHZ_CHAN_2413 4 #define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4 diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 192ad5c1fcc8..a5edebeb0b4f 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -1233,6 +1233,9 @@ uint brcms_reset(struct brcms_info *wl) /* dpc will not be rescheduled */ wl->resched = false; + /* inform publicly that interface is down */ + wl->pub->up = false; + return 0; } diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 95aa8e1683ec..83324b321652 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -2042,7 +2042,8 @@ static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status) return; } len = ETH_ALEN; - ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len); + ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, bssid, + &len); if (ret) { IPW_DEBUG_INFO("failed querying ordinals at line %d\n", __LINE__); diff --git a/drivers/net/wireless/iwlwifi/dvm/debugfs.c b/drivers/net/wireless/iwlwifi/dvm/debugfs.c index 46782f1102ac..a47b306b522c 100644 --- a/drivers/net/wireless/iwlwifi/dvm/debugfs.c +++ b/drivers/net/wireless/iwlwifi/dvm/debugfs.c @@ -124,6 +124,9 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file, const struct fw_img *img; size_t bufsz; + if (!iwl_is_ready_rf(priv)) + return -EAGAIN; + /* default is to dump the entire data segment */ if (!priv->dbgfs_sram_offset && !priv->dbgfs_sram_len) { priv->dbgfs_sram_offset = 0x800000; diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index d9694c58208c..4ffc18dc3a57 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -350,7 +350,7 @@ int iwl_queue_space(const struct iwl_queue *q); /***************************************************** * Error handling ******************************************************/ -int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display); +int iwl_dump_fh(struct iwl_trans *trans, char **buf); void iwl_dump_csr(struct iwl_trans *trans); /***************************************************** diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index 39a6ca1f009c..d1a61ba6247a 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -555,7 +555,7 @@ static void iwl_irq_handle_error(struct iwl_trans *trans) } iwl_dump_csr(trans); - iwl_dump_fh(trans, NULL, false); + iwl_dump_fh(trans, NULL); iwl_op_mode_nic_error(trans->op_mode); } diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 939c2f78df58..1e86ea2266d4 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1649,13 +1649,9 @@ static const char *get_fh_string(int cmd) #undef IWL_CMD } -int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display) +int iwl_dump_fh(struct iwl_trans *trans, char **buf) { int i; -#ifdef CONFIG_IWLWIFI_DEBUG - int pos = 0; - size_t bufsz = 0; -#endif static const u32 fh_tbl[] = { FH_RSCSR_CHNL0_STTS_WPTR_REG, FH_RSCSR_CHNL0_RBDCB_BASE_REG, @@ -1667,29 +1663,35 @@ int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display) FH_TSSR_TX_STATUS_REG, FH_TSSR_TX_ERROR_REG }; -#ifdef CONFIG_IWLWIFI_DEBUG - if (display) { - bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; + +#ifdef CONFIG_IWLWIFI_DEBUGFS + if (buf) { + int pos = 0; + size_t bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; + *buf = kmalloc(bufsz, GFP_KERNEL); if (!*buf) return -ENOMEM; + pos += scnprintf(*buf + pos, bufsz - pos, "FH register values:\n"); - for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { + + for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) pos += scnprintf(*buf + pos, bufsz - pos, " %34s: 0X%08x\n", get_fh_string(fh_tbl[i]), iwl_read_direct32(trans, fh_tbl[i])); - } + return pos; } #endif + IWL_ERR(trans, "FH register values:\n"); - for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { + for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) IWL_ERR(trans, " %34s: 0X%08x\n", get_fh_string(fh_tbl[i]), iwl_read_direct32(trans, fh_tbl[i])); - } + return 0; } @@ -1982,11 +1984,11 @@ static ssize_t iwl_dbgfs_fh_reg_read(struct file *file, size_t count, loff_t *ppos) { struct iwl_trans *trans = file->private_data; - char *buf; + char *buf = NULL; int pos = 0; ssize_t ret = -EFAULT; - ret = pos = iwl_dump_fh(trans, &buf, true); + ret = pos = iwl_dump_fh(trans, &buf); if (buf) { ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 30899901aef5..650f79a1f2bd 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -57,8 +57,7 @@ static const struct ethtool_ops xennet_ethtool_ops; struct netfront_cb { - struct page *page; - unsigned offset; + int pull_to; }; #define NETFRONT_SKB_CB(skb) ((struct netfront_cb *)((skb)->cb)) @@ -867,15 +866,9 @@ static int handle_incoming_queue(struct net_device *dev, struct sk_buff *skb; while ((skb = __skb_dequeue(rxq)) != NULL) { - struct page *page = NETFRONT_SKB_CB(skb)->page; - void *vaddr = page_address(page); - unsigned offset = NETFRONT_SKB_CB(skb)->offset; - - memcpy(skb->data, vaddr + offset, - skb_headlen(skb)); + int pull_to = NETFRONT_SKB_CB(skb)->pull_to; - if (page != skb_frag_page(&skb_shinfo(skb)->frags[0])) - __free_page(page); + __pskb_pull_tail(skb, pull_to - skb_headlen(skb)); /* Ethernet work: Delayed to here as it peeks the header. */ skb->protocol = eth_type_trans(skb, dev); @@ -913,7 +906,6 @@ static int xennet_poll(struct napi_struct *napi, int budget) struct sk_buff_head errq; struct sk_buff_head tmpq; unsigned long flags; - unsigned int len; int err; spin_lock(&np->rx_lock); @@ -955,24 +947,13 @@ err: } } - NETFRONT_SKB_CB(skb)->page = - skb_frag_page(&skb_shinfo(skb)->frags[0]); - NETFRONT_SKB_CB(skb)->offset = rx->offset; - - len = rx->status; - if (len > RX_COPY_THRESHOLD) - len = RX_COPY_THRESHOLD; - skb_put(skb, len); + NETFRONT_SKB_CB(skb)->pull_to = rx->status; + if (NETFRONT_SKB_CB(skb)->pull_to > RX_COPY_THRESHOLD) + NETFRONT_SKB_CB(skb)->pull_to = RX_COPY_THRESHOLD; - if (rx->status > len) { - skb_shinfo(skb)->frags[0].page_offset = - rx->offset + len; - skb_frag_size_set(&skb_shinfo(skb)->frags[0], rx->status - len); - skb->data_len = rx->status - len; - } else { - __skb_fill_page_desc(skb, 0, NULL, 0, 0); - skb_shinfo(skb)->nr_frags = 0; - } + skb_shinfo(skb)->frags[0].page_offset = rx->offset; + skb_frag_size_set(&skb_shinfo(skb)->frags[0], rx->status); + skb->data_len = rx->status; i = xennet_fill_frags(np, skb, &tmpq); @@ -999,7 +980,7 @@ err: * receive throughout using the standard receive * buffer size was cut by 25%(!!!). */ - skb->truesize += skb->data_len - (RX_COPY_THRESHOLD - len); + skb->truesize += skb->data_len - RX_COPY_THRESHOLD; skb->len += skb->data_len; if (rx->flags & XEN_NETRXF_csum_blank) diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c index 5d6de380e42b..352f96180bc7 100644 --- a/drivers/parport/parport_gsc.c +++ b/drivers/parport/parport_gsc.c @@ -271,6 +271,7 @@ struct parport *__devinit parport_gsc_probe_port (unsigned long base, if (!parport_SPP_supported (p)) { /* No port. */ kfree (priv); + kfree(ops); return NULL; } parport_PS2_supported (p); diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c index e9c32274df3f..1631eeaf440e 100644 --- a/drivers/parport/parport_serial.c +++ b/drivers/parport/parport_serial.c @@ -62,6 +62,7 @@ enum parport_pc_pci_cards { timedia_9079a, timedia_9079b, timedia_9079c, + wch_ch353_2s1p, }; /* each element directly indexed from enum list, above */ @@ -145,6 +146,7 @@ static struct parport_pc_pci cards[] __devinitdata = { /* timedia_9079a */ { 1, { { 2, 3 }, } }, /* timedia_9079b */ { 1, { { 2, 3 }, } }, /* timedia_9079c */ { 1, { { 2, 3 }, } }, + /* wch_ch353_2s1p*/ { 1, { { 2, -1}, } }, }; static struct pci_device_id parport_serial_pci_tbl[] = { @@ -243,7 +245,8 @@ static struct pci_device_id parport_serial_pci_tbl[] = { { 0x1409, 0x7168, 0x1409, 0xb079, 0, 0, timedia_9079a }, { 0x1409, 0x7168, 0x1409, 0xc079, 0, 0, timedia_9079b }, { 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c }, - + /* WCH CARDS */ + { 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p}, { 0, } /* terminate list */ }; MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl); @@ -460,6 +463,12 @@ static struct pciserial_board pci_parport_serial_boards[] __devinitdata = { .base_baud = 921600, .uart_offset = 8, }, + [wch_ch353_2s1p] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, }; struct parport_serial_private { diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 5270f1a99328..d6fd6b6d9d4b 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -280,8 +280,12 @@ static long local_pci_probe(void *_ddi) { struct drv_dev_and_id *ddi = _ddi; struct device *dev = &ddi->dev->dev; + struct device *parent = dev->parent; int rc; + /* The parent bridge must be in active state when probing */ + if (parent) + pm_runtime_get_sync(parent); /* Unbound PCI devices are always set to disabled and suspended. * During probe, the device is set to enabled and active and the * usage count is incremented. If the driver supports runtime PM, @@ -298,6 +302,8 @@ static long local_pci_probe(void *_ddi) pm_runtime_set_suspended(dev); pm_runtime_put_noidle(dev); } + if (parent) + pm_runtime_put(parent); return rc; } diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 6869009c7393..02d107b15281 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -458,6 +458,40 @@ boot_vga_show(struct device *dev, struct device_attribute *attr, char *buf) } struct device_attribute vga_attr = __ATTR_RO(boot_vga); +static void +pci_config_pm_runtime_get(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct device *parent = dev->parent; + + if (parent) + pm_runtime_get_sync(parent); + pm_runtime_get_noresume(dev); + /* + * pdev->current_state is set to PCI_D3cold during suspending, + * so wait until suspending completes + */ + pm_runtime_barrier(dev); + /* + * Only need to resume devices in D3cold, because config + * registers are still accessible for devices suspended but + * not in D3cold. + */ + if (pdev->current_state == PCI_D3cold) + pm_runtime_resume(dev); +} + +static void +pci_config_pm_runtime_put(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct device *parent = dev->parent; + + pm_runtime_put(dev); + if (parent) + pm_runtime_put_sync(parent); +} + static ssize_t pci_read_config(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, @@ -484,6 +518,8 @@ pci_read_config(struct file *filp, struct kobject *kobj, size = count; } + pci_config_pm_runtime_get(dev); + if ((off & 1) && size) { u8 val; pci_user_read_config_byte(dev, off, &val); @@ -529,6 +565,8 @@ pci_read_config(struct file *filp, struct kobject *kobj, --size; } + pci_config_pm_runtime_put(dev); + return count; } @@ -549,6 +587,8 @@ pci_write_config(struct file* filp, struct kobject *kobj, count = size; } + pci_config_pm_runtime_get(dev); + if ((off & 1) && size) { pci_user_write_config_byte(dev, off, data[off - init_off]); off++; @@ -587,6 +627,8 @@ pci_write_config(struct file* filp, struct kobject *kobj, --size; } + pci_config_pm_runtime_put(dev); + return count; } diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index f3ea977a5b1b..ab4bf5a4c2f1 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1941,6 +1941,7 @@ void pci_pm_init(struct pci_dev *dev) dev->pm_cap = pm; dev->d3_delay = PCI_PM_D3_WAIT; dev->d3cold_delay = PCI_PM_D3COLD_WAIT; + dev->d3cold_allowed = true; dev->d1_support = false; dev->d2_support = false; diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 3a7eefcb270a..e76b44777dbf 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -140,9 +140,17 @@ static int pcie_port_runtime_resume(struct device *dev) { return 0; } + +static int pcie_port_runtime_idle(struct device *dev) +{ + /* Delay for a short while to prevent too frequent suspend/resume */ + pm_schedule_suspend(dev, 10); + return -EBUSY; +} #else #define pcie_port_runtime_suspend NULL #define pcie_port_runtime_resume NULL +#define pcie_port_runtime_idle NULL #endif static const struct dev_pm_ops pcie_portdrv_pm_ops = { @@ -155,6 +163,7 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = { .resume_noirq = pcie_port_resume_noirq, .runtime_suspend = pcie_port_runtime_suspend, .runtime_resume = pcie_port_runtime_resume, + .runtime_idle = pcie_port_runtime_idle, }; #define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops) @@ -200,6 +209,11 @@ static int __devinit pcie_portdrv_probe(struct pci_dev *dev, return status; pci_save_state(dev); + /* + * D3cold may not work properly on some PCIe port, so disable + * it by default. + */ + dev->d3cold_allowed = false; if (!pci_match_id(port_runtime_pm_black_list, dev)) pm_runtime_put_noidle(&dev->dev); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 6c143b4497ca..9f8a6b79a8ec 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -144,15 +144,13 @@ static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar) case PCI_BASE_ADDRESS_MEM_TYPE_32: break; case PCI_BASE_ADDRESS_MEM_TYPE_1M: - dev_info(&dev->dev, "1M mem BAR treated as 32-bit BAR\n"); + /* 1M mem BAR treated as 32-bit BAR */ break; case PCI_BASE_ADDRESS_MEM_TYPE_64: flags |= IORESOURCE_MEM_64; break; default: - dev_warn(&dev->dev, - "mem unknown type %x treated as 32-bit BAR\n", - mem_type); + /* mem unknown type treated as 32-bit BAR */ break; } return flags; @@ -173,9 +171,11 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, u32 l, sz, mask; u16 orig_cmd; struct pci_bus_region region; + bool bar_too_big = false, bar_disabled = false; mask = type ? PCI_ROM_ADDRESS_MASK : ~0; + /* No printks while decoding is disabled! */ if (!dev->mmio_always_on) { pci_read_config_word(dev, PCI_COMMAND, &orig_cmd); pci_write_config_word(dev, PCI_COMMAND, @@ -240,8 +240,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, goto fail; if ((sizeof(resource_size_t) < 8) && (sz64 > 0x100000000ULL)) { - dev_err(&dev->dev, "reg %x: can't handle 64-bit BAR\n", - pos); + bar_too_big = true; goto fail; } @@ -252,12 +251,11 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, region.start = 0; region.end = sz64; pcibios_bus_to_resource(dev, res, ®ion); + bar_disabled = true; } else { region.start = l64; region.end = l64 + sz64; pcibios_bus_to_resource(dev, res, ®ion); - dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", - pos, res); } } else { sz = pci_size(l, sz, mask); @@ -268,18 +266,23 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, region.start = l; region.end = l + sz; pcibios_bus_to_resource(dev, res, ®ion); - - dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res); } - out: + goto out; + + +fail: + res->flags = 0; +out: if (!dev->mmio_always_on) pci_write_config_word(dev, PCI_COMMAND, orig_cmd); + if (bar_too_big) + dev_err(&dev->dev, "reg %x: can't handle 64-bit BAR\n", pos); + if (res->flags && !bar_disabled) + dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res); + return (res->flags & IORESOURCE_MEM_64) ? 1 : 0; - fail: - res->flags = 0; - goto out; } static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom) diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c index 44efc6e202af..d4957b4edb62 100644 --- a/drivers/power/avs/smartreflex.c +++ b/drivers/power/avs/smartreflex.c @@ -27,6 +27,8 @@ #include <linux/pm_runtime.h> #include <linux/power/smartreflex.h> +#include <plat/cpu.h> + #define SMARTREFLEX_NAME_LEN 16 #define NVALUE_NAME_LEN 40 #define SR_DISABLE_TIMEOUT 200 diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index 831868904e02..1dd61f402b04 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -58,6 +58,7 @@ struct sam9_rtc { struct rtc_device *rtcdev; u32 imr; void __iomem *gpbr; + int irq; }; #define rtt_readl(rtc, field) \ @@ -292,7 +293,7 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev) { struct resource *r, *r_gpbr; struct sam9_rtc *rtc; - int ret; + int ret, irq; u32 mr; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -302,10 +303,18 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev) return -ENODEV; } + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get interrupt resource\n"); + return irq; + } + rtc = kzalloc(sizeof *rtc, GFP_KERNEL); if (!rtc) return -ENOMEM; + rtc->irq = irq; + /* platform setup code should have handled this; sigh */ if (!device_can_wakeup(&pdev->dev)) device_init_wakeup(&pdev->dev, 1); @@ -345,11 +354,10 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev) } /* register irq handler after we know what name we'll use */ - ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt, - IRQF_SHARED, + ret = request_irq(rtc->irq, at91_rtc_interrupt, IRQF_SHARED, dev_name(&rtc->rtcdev->dev), rtc); if (ret) { - dev_dbg(&pdev->dev, "can't share IRQ %d?\n", AT91_ID_SYS); + dev_dbg(&pdev->dev, "can't share IRQ %d?\n", rtc->irq); rtc_device_unregister(rtc->rtcdev); goto fail_register; } @@ -386,7 +394,7 @@ static int __devexit at91_rtc_remove(struct platform_device *pdev) /* disable all interrupts */ rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)); - free_irq(AT91_ID_SYS, rtc); + free_irq(rtc->irq, rtc); rtc_device_unregister(rtc->rtcdev); @@ -423,7 +431,7 @@ static int at91_rtc_suspend(struct platform_device *pdev, rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); if (rtc->imr) { if (device_may_wakeup(&pdev->dev) && (mr & AT91_RTT_ALMIEN)) { - enable_irq_wake(AT91_ID_SYS); + enable_irq_wake(rtc->irq); /* don't let RTTINC cause wakeups */ if (mr & AT91_RTT_RTTINCIEN) rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN); @@ -441,7 +449,7 @@ static int at91_rtc_resume(struct platform_device *pdev) if (rtc->imr) { if (device_may_wakeup(&pdev->dev)) - disable_irq_wake(AT91_ID_SYS); + disable_irq_wake(rtc->irq); mr = rtt_readl(rtc, MR); rtt_writel(rtc, MR, mr | rtc->imr); } diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c index 6c0116d48c74..9ffb6d5f17aa 100644 --- a/drivers/s390/char/con3215.c +++ b/drivers/s390/char/con3215.c @@ -716,10 +716,17 @@ static int raw3215_probe (struct ccw_device *cdev) static void raw3215_remove (struct ccw_device *cdev) { struct raw3215_info *raw; + unsigned int line; ccw_device_set_offline(cdev); raw = dev_get_drvdata(&cdev->dev); if (raw) { + spin_lock(&raw3215_device_lock); + for (line = 0; line < NR_3215; line++) + if (raw3215[line] == raw) + break; + raw3215[line] = NULL; + spin_unlock(&raw3215_device_lock); dev_set_drvdata(&cdev->dev, NULL); raw3215_free_info(raw); } @@ -935,6 +942,19 @@ static int __init con3215_init(void) console_initcall(con3215_init); #endif +static int tty3215_install(struct tty_driver *driver, struct tty_struct *tty) +{ + struct raw3215_info *raw; + + raw = raw3215[tty->index]; + if (raw == NULL) + return -ENODEV; + + tty->driver_data = raw; + + return tty_port_install(&raw->port, driver, tty); +} + /* * tty3215_open * @@ -942,14 +962,9 @@ console_initcall(con3215_init); */ static int tty3215_open(struct tty_struct *tty, struct file * filp) { - struct raw3215_info *raw; + struct raw3215_info *raw = tty->driver_data; int retval; - raw = raw3215[tty->index]; - if (raw == NULL) - return -ENODEV; - - tty->driver_data = raw; tty_port_tty_set(&raw->port, tty); tty->low_latency = 0; /* don't use bottom half for pushing chars */ @@ -1110,6 +1125,7 @@ static void tty3215_start(struct tty_struct *tty) } static const struct tty_operations tty3215_ops = { + .install = tty3215_install, .open = tty3215_open, .close = tty3215_close, .write = tty3215_write, diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c index 0792c85baafe..30ec09e3d037 100644 --- a/drivers/s390/char/sclp_tty.c +++ b/drivers/s390/char/sclp_tty.c @@ -567,6 +567,7 @@ sclp_tty_init(void) driver->init_termios.c_lflag = ISIG | ECHO; driver->flags = TTY_DRIVER_REAL_RAW; tty_set_operations(driver, &sclp_ops); + tty_port_link_device(&sclp_port, driver, 0); rc = tty_register_driver(driver); if (rc) { put_tty_driver(driver); diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c index edfc0fd73dc6..7e60f3d2f3f9 100644 --- a/drivers/s390/char/sclp_vt220.c +++ b/drivers/s390/char/sclp_vt220.c @@ -691,6 +691,7 @@ static int __init sclp_vt220_tty_init(void) driver->init_termios = tty_std_termios; driver->flags = TTY_DRIVER_REAL_RAW; tty_set_operations(driver, &sclp_vt220_ops); + tty_port_link_device(&sclp_vt220_port, driver, 0); rc = tty_register_driver(driver); if (rc) diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c index 1928f3458d10..482ee028f842 100644 --- a/drivers/s390/char/tty3270.c +++ b/drivers/s390/char/tty3270.c @@ -842,17 +842,14 @@ static struct raw3270_fn tty3270_fn = { }; /* - * This routine is called whenever a 3270 tty is opened. + * This routine is called whenever a 3270 tty is opened first time. */ -static int -tty3270_open(struct tty_struct *tty, struct file * filp) +static int tty3270_install(struct tty_driver *driver, struct tty_struct *tty) { struct raw3270_view *view; struct tty3270 *tp; int i, rc; - if (tty->count > 1) - return 0; /* Check if the tty3270 is already there. */ view = raw3270_find_view(&tty3270_fn, tty->index + RAW3270_FIRSTMINOR); @@ -865,7 +862,7 @@ tty3270_open(struct tty_struct *tty, struct file * filp) /* why to reassign? */ tty_port_tty_set(&tp->port, tty); tp->inattr = TF_INPUT; - return 0; + return tty_port_install(&tp->port, driver, tty); } if (tty3270_max_index < tty->index + 1) tty3270_max_index = tty->index + 1; @@ -895,7 +892,6 @@ tty3270_open(struct tty_struct *tty, struct file * filp) tty_port_tty_set(&tp->port, tty); tty->low_latency = 0; - tty->driver_data = tp; tty->winsize.ws_row = tp->view.rows - 2; tty->winsize.ws_col = tp->view.cols; @@ -915,6 +911,15 @@ tty3270_open(struct tty_struct *tty, struct file * filp) kbd_ascebc(tp->kbd, tp->view.ascebc); raw3270_activate_view(&tp->view); + + rc = tty_port_install(&tp->port, driver, tty); + if (rc) { + raw3270_put_view(&tp->view); + return rc; + } + + tty->driver_data = tp; + return 0; } @@ -932,10 +937,17 @@ tty3270_close(struct tty_struct *tty, struct file * filp) if (tp) { tty->driver_data = NULL; tty_port_tty_set(&tp->port, NULL); - raw3270_put_view(&tp->view); } } +static void tty3270_cleanup(struct tty_struct *tty) +{ + struct tty3270 *tp = tty->driver_data; + + if (tp) + raw3270_put_view(&tp->view); +} + /* * We always have room. */ @@ -1737,7 +1749,8 @@ static long tty3270_compat_ioctl(struct tty_struct *tty, #endif static const struct tty_operations tty3270_ops = { - .open = tty3270_open, + .install = tty3270_install, + .cleanup = tty3270_cleanup, .close = tty3270_close, .write = tty3270_write, .put_char = tty3270_put_char, @@ -1781,7 +1794,7 @@ static int __init tty3270_init(void) driver->type = TTY_DRIVER_TYPE_SYSTEM; driver->subtype = SYSTEM_TYPE_TTY; driver->init_termios = tty_std_termios; - driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_DYNAMIC_DEV; + driver->flags = TTY_DRIVER_RESET_TERMIOS; tty_set_operations(driver, &tty3270_ops); ret = tty_register_driver(driver); if (ret) { @@ -1800,6 +1813,7 @@ tty3270_exit(void) driver = tty3270_driver; tty3270_driver = NULL; tty_unregister_driver(driver); + put_tty_driver(driver); tty3270_del_views(); } diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c index 9b0d71696039..a3996a1c6345 100644 --- a/drivers/spi/spi-omap-uwire.c +++ b/drivers/spi/spi-omap-uwire.c @@ -53,7 +53,8 @@ #include <asm/mach-types.h> #include <plat/mux.h> -#include <plat/omap7xx.h> /* OMAP7XX_IO_CONF registers */ + +#include <mach/omap7xx.h> /* OMAP7XX_IO_CONF registers */ /* FIXME address is now a platform device resource, diff --git a/drivers/staging/ipack/devices/ipoctal.c b/drivers/staging/ipack/devices/ipoctal.c index fd0e30132ca2..a68d981c259f 100644 --- a/drivers/staging/ipack/devices/ipoctal.c +++ b/drivers/staging/ipack/devices/ipoctal.c @@ -502,7 +502,7 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, ipoctal->pointer_read[i] = 0; ipoctal->pointer_write[i] = 0; ipoctal->nb_bytes[i] = 0; - tty_register_device(tty, i, NULL); + tty_port_register_device(&ipoctal->tty_port[i], tty, i, NULL); /* * Enable again the RX. TX will be enabled when @@ -617,7 +617,7 @@ static void ipoctal_set_termios(struct tty_struct *tty, struct ipoctal *ipoctal = tty->driver_data; speed_t baud; - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; /* Disable and reset everything before change the setup */ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr, @@ -643,7 +643,7 @@ static void ipoctal_set_termios(struct tty_struct *tty, default: mr1 |= MR1_CHRL_8_BITS; /* By default, select CS8 */ - tty->termios->c_cflag = (cflag & ~CSIZE) | CS8; + tty->termios.c_cflag = (cflag & ~CSIZE) | CS8; break; } @@ -657,7 +657,7 @@ static void ipoctal_set_termios(struct tty_struct *tty, mr1 |= MR1_PARITY_OFF; /* Mark or space parity is not supported */ - tty->termios->c_cflag &= ~CMSPAR; + tty->termios.c_cflag &= ~CMSPAR; /* Set stop bits */ if (cflag & CSTOPB) @@ -690,10 +690,10 @@ static void ipoctal_set_termios(struct tty_struct *tty, } baud = tty_get_baud_rate(tty); - tty_termios_encode_baud_rate(tty->termios, baud, baud); + tty_termios_encode_baud_rate(&tty->termios, baud, baud); /* Set baud rate */ - switch (tty->termios->c_ospeed) { + switch (baud) { case 75: csr |= TX_CLK_75 | RX_CLK_75; break; @@ -734,7 +734,7 @@ static void ipoctal_set_termios(struct tty_struct *tty, default: csr |= TX_CLK_38400 | RX_CLK_38400; /* In case of default, we establish 38400 bps */ - tty_termios_encode_baud_rate(tty->termios, 38400, 38400); + tty_termios_encode_baud_rate(&tty->termios, 38400, 38400); break; } diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index 8a362f7af379..c90de969be8f 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -315,10 +315,8 @@ static void qt_read_bulk_callback(struct urb *urb) } tty = tty_port_tty_get(&port->port); - if (!tty) { - dbg("%s - bad tty pointer - exiting", __func__); + if (!tty) return; - } data = urb->transfer_buffer; @@ -364,7 +362,7 @@ static void qt_read_bulk_callback(struct urb *urb) goto exit; } - if (tty && RxCount) { + if (RxCount) { flag_data = 0; for (i = 0; i < RxCount; ++i) { /* Look ahead code here */ @@ -428,7 +426,7 @@ static void qt_read_bulk_callback(struct urb *urb) dbg("%s - failed resubmitting read urb, error %d", __func__, result); else { - if (tty && RxCount) { + if (RxCount) { tty_flip_buffer_push(tty); tty_schedule_flip(tty); } @@ -897,8 +895,6 @@ static int qt_open(struct tty_struct *tty, * Put this here to make it responsive to stty and defaults set by * the tty layer */ - /* FIXME: is this needed? */ - /* qt_set_termios(tty, port, NULL); */ /* Check to see if we've set up our endpoint info yet */ if (port0->open_ports == 1) { @@ -1195,7 +1191,7 @@ static void qt_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; unsigned char new_LCR = 0; unsigned int cflag = termios->c_cflag; unsigned int index; @@ -1204,7 +1200,7 @@ static void qt_set_termios(struct tty_struct *tty, index = tty->index - port->serial->minor; - switch (cflag) { + switch (cflag & CSIZE) { case CS5: new_LCR |= SERIAL_5_DATA; break; @@ -1215,6 +1211,8 @@ static void qt_set_termios(struct tty_struct *tty, new_LCR |= SERIAL_7_DATA; break; default: + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; case CS8: new_LCR |= SERIAL_8_DATA; break; @@ -1301,7 +1299,7 @@ static void qt_set_termios(struct tty_struct *tty, dbg(__FILE__ "BoxSetSW_FlowCtrl (diabling) failed\n"); } - tty->termios->c_cflag &= ~CMSPAR; + termios->c_cflag &= ~CMSPAR; /* FIXME: Error cases should be returning the actual bits changed only */ } diff --git a/drivers/staging/speakup/serialio.h b/drivers/staging/speakup/serialio.h index 614271f9b99f..55d68b5ad165 100644 --- a/drivers/staging/speakup/serialio.h +++ b/drivers/staging/speakup/serialio.h @@ -1,8 +1,7 @@ #ifndef _SPEAKUP_SERIAL_H #define _SPEAKUP_SERIAL_H -#include <linux/serial.h> /* for rs_table, serial constants & - serial_uart_config */ +#include <linux/serial.h> /* for rs_table, serial constants */ #include <linux/serial_reg.h> /* for more serial constants */ #ifndef __sparc__ #include <asm/serial.h> diff --git a/drivers/staging/tidspbridge/core/wdt.c b/drivers/staging/tidspbridge/core/wdt.c index 870f934f4f3b..453ef748bf45 100644 --- a/drivers/staging/tidspbridge/core/wdt.c +++ b/drivers/staging/tidspbridge/core/wdt.c @@ -25,7 +25,7 @@ #include <dspbridge/host_os.h> -#define OMAP34XX_WDT3_BASE (L4_PER_34XX_BASE + 0x30000) +#define INT_34XX_WDT3_IRQ (36 + NR_IRQS) static struct dsp_wdt_setting dsp_wdt; diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index 6cc4358f68c1..42d0a2581a87 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -420,7 +420,7 @@ static void check_modem_status(struct serial_state *info) tty_hangup(port->tty); } } - if (port->flags & ASYNC_CTS_FLOW) { + if (tty_port_cts_enabled(port)) { if (port->tty->hw_stopped) { if (!(status & SER_CTS)) { #if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) @@ -646,7 +646,7 @@ static void shutdown(struct tty_struct *tty, struct serial_state *info) custom.adkcon = AC_UARTBRK; mb(); - if (tty->termios->c_cflag & HUPCL) + if (tty->termios.c_cflag & HUPCL) info->MCR &= ~(SER_DTR|SER_RTS); rtsdtr_ctrl(info->MCR); @@ -670,7 +670,7 @@ static void change_speed(struct tty_struct *tty, struct serial_state *info, int bits; unsigned long flags; - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; /* Byte size is always 8 bits plus parity bit if requested */ @@ -707,8 +707,8 @@ static void change_speed(struct tty_struct *tty, struct serial_state *info, /* If the quotient is zero refuse the change */ if (!quot && old_termios) { /* FIXME: Will need updating for new tty in the end */ - tty->termios->c_cflag &= ~CBAUD; - tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD); + tty->termios.c_cflag &= ~CBAUD; + tty->termios.c_cflag |= (old_termios->c_cflag & CBAUD); baud = tty_get_baud_rate(tty); if (!baud) baud = 9600; @@ -984,7 +984,7 @@ static void rs_throttle(struct tty_struct * tty) if (I_IXOFF(tty)) rs_send_xchar(tty, STOP_CHAR(tty)); - if (tty->termios->c_cflag & CRTSCTS) + if (tty->termios.c_cflag & CRTSCTS) info->MCR &= ~SER_RTS; local_irq_save(flags); @@ -1012,7 +1012,7 @@ static void rs_unthrottle(struct tty_struct * tty) else rs_send_xchar(tty, START_CHAR(tty)); } - if (tty->termios->c_cflag & CRTSCTS) + if (tty->termios.c_cflag & CRTSCTS) info->MCR |= SER_RTS; local_irq_save(flags); rtsdtr_ctrl(info->MCR); @@ -1033,7 +1033,7 @@ static int get_serial_info(struct tty_struct *tty, struct serial_state *state, if (!retinfo) return -EFAULT; memset(&tmp, 0, sizeof(tmp)); - tty_lock(); + tty_lock(tty); tmp.line = tty->index; tmp.port = state->port; tmp.flags = state->tport.flags; @@ -1042,7 +1042,7 @@ static int get_serial_info(struct tty_struct *tty, struct serial_state *state, tmp.close_delay = state->tport.close_delay; tmp.closing_wait = state->tport.closing_wait; tmp.custom_divisor = state->custom_divisor; - tty_unlock(); + tty_unlock(tty); if (copy_to_user(retinfo,&tmp,sizeof(*retinfo))) return -EFAULT; return 0; @@ -1059,12 +1059,12 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state, if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) return -EFAULT; - tty_lock(); + tty_lock(tty); change_spd = ((new_serial.flags ^ port->flags) & ASYNC_SPD_MASK) || new_serial.custom_divisor != state->custom_divisor; if (new_serial.irq || new_serial.port != state->port || new_serial.xmit_fifo_size != state->xmit_fifo_size) { - tty_unlock(); + tty_unlock(tty); return -EINVAL; } @@ -1074,7 +1074,7 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state, (new_serial.xmit_fifo_size != state->xmit_fifo_size) || ((new_serial.flags & ~ASYNC_USR_MASK) != (port->flags & ~ASYNC_USR_MASK))) { - tty_unlock(); + tty_unlock(tty); return -EPERM; } port->flags = ((port->flags & ~ASYNC_USR_MASK) | @@ -1084,7 +1084,7 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state, } if (new_serial.baud_base < 9600) { - tty_unlock(); + tty_unlock(tty); return -EINVAL; } @@ -1116,7 +1116,7 @@ check_and_exit: } } else retval = startup(tty, state); - tty_unlock(); + tty_unlock(tty); return retval; } @@ -1330,7 +1330,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { struct serial_state *info = tty->driver_data; unsigned long flags; - unsigned int cflag = tty->termios->c_cflag; + unsigned int cflag = tty->termios.c_cflag; change_speed(tty, info, old_termios); @@ -1347,7 +1347,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { info->MCR |= SER_DTR; - if (!(tty->termios->c_cflag & CRTSCTS) || + if (!(tty->termios.c_cflag & CRTSCTS) || !test_bit(TTY_THROTTLED, &tty->flags)) { info->MCR |= SER_RTS; } @@ -1358,7 +1358,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) /* Handle turning off CRTSCTS */ if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { + !(tty->termios.c_cflag & CRTSCTS)) { tty->hw_stopped = 0; rs_start(tty); } @@ -1371,7 +1371,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) * or not. Hence, this may change..... */ if (!(old_termios->c_cflag & CLOCAL) && - (tty->termios->c_cflag & CLOCAL)) + (tty->termios.c_cflag & CLOCAL)) wake_up_interruptible(&info->open_wait); #endif } @@ -1710,10 +1710,6 @@ static int __init amiga_serial_probe(struct platform_device *pdev) serial_driver->flags = TTY_DRIVER_REAL_RAW; tty_set_operations(serial_driver, &serial_ops); - error = tty_register_driver(serial_driver); - if (error) - goto fail_put_tty_driver; - state = rs_table; state->port = (int)&custom.serdatr; /* Just to give it a value */ state->custom_divisor = 0; @@ -1724,6 +1720,11 @@ static int __init amiga_serial_probe(struct platform_device *pdev) state->icount.overrun = state->icount.brk = 0; tty_port_init(&state->tport); state->tport.ops = &amiga_port_ops; + tty_port_link_device(&state->tport, serial_driver, 0); + + error = tty_register_driver(serial_driver); + if (error) + goto fail_put_tty_driver; printk(KERN_INFO "ttyS0 is the amiga builtin serial port\n"); diff --git a/drivers/tty/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c index 61fc74fe1747..02b7d3a09696 100644 --- a/drivers/tty/bfin_jtag_comm.c +++ b/drivers/tty/bfin_jtag_comm.c @@ -263,6 +263,7 @@ static int __init bfin_jc_init(void) bfin_jc_driver->subtype = SERIAL_TYPE_NORMAL; bfin_jc_driver->init_termios = tty_std_termios; tty_set_operations(bfin_jc_driver, &bfin_jc_ops); + tty_port_link_device(&port, bfin_jc_driver, 0); ret = tty_register_driver(bfin_jc_driver); if (ret) diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c index e61cabdd69df..0a6a0bc1b598 100644 --- a/drivers/tty/cyclades.c +++ b/drivers/tty/cyclades.c @@ -727,7 +727,7 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip, else tty_hangup(tty); } - if ((mdm_change & CyCTS) && (info->port.flags & ASYNC_CTS_FLOW)) { + if ((mdm_change & CyCTS) && tty_port_cts_enabled(&info->port)) { if (tty->hw_stopped) { if (mdm_status & CyCTS) { /* cy_start isn't used @@ -1459,7 +1459,7 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty) info->port.xmit_buf = NULL; free_page((unsigned long)temp); } - if (tty->termios->c_cflag & HUPCL) + if (tty->termios.c_cflag & HUPCL) cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR); cyy_issue_cmd(info, CyCHAN_CTL | CyDIS_RCVR); @@ -1488,7 +1488,7 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty) free_page((unsigned long)temp); } - if (tty->termios->c_cflag & HUPCL) + if (tty->termios.c_cflag & HUPCL) tty_port_lower_dtr_rts(&info->port); set_bit(TTY_IO_ERROR, &tty->flags); @@ -1599,7 +1599,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp) * If the port is the middle of closing, bail out now */ if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) { - wait_event_interruptible_tty(info->port.close_wait, + wait_event_interruptible_tty(tty, info->port.close_wait, !(info->port.flags & ASYNC_CLOSING)); return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS; } @@ -1999,14 +1999,11 @@ static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty) int baud, baud_rate = 0; int i; - if (!tty->termios) /* XXX can this happen at all? */ - return; - if (info->line == -1) return; - cflag = tty->termios->c_cflag; - iflag = tty->termios->c_iflag; + cflag = tty->termios.c_cflag; + iflag = tty->termios.c_iflag; /* * Set up the tty->alt_speed kludge @@ -2825,7 +2822,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) cy_set_line_char(info, tty); if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { + !(tty->termios.c_cflag & CRTSCTS)) { tty->hw_stopped = 0; cy_start(tty); } @@ -2837,7 +2834,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) * or not. Hence, this may change..... */ if (!(old_termios->c_cflag & CLOCAL) && - (tty->termios->c_cflag & CLOCAL)) + (tty->termios.c_cflag & CLOCAL)) wake_up_interruptible(&info->port.open_wait); #endif } /* cy_set_termios */ @@ -2899,7 +2896,7 @@ static void cy_throttle(struct tty_struct *tty) info->throttle = 1; } - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { if (!cy_is_Z(card)) { spin_lock_irqsave(&card->card_lock, flags); cyy_change_rts_dtr(info, 0, TIOCM_RTS); @@ -2938,7 +2935,7 @@ static void cy_unthrottle(struct tty_struct *tty) cy_send_xchar(tty, START_CHAR(tty)); } - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { card = info->card; if (!cy_is_Z(card)) { spin_lock_irqsave(&card->card_lock, flags); @@ -3289,9 +3286,10 @@ static unsigned short __devinit cyy_init_card(void __iomem *true_base_addr, static int __init cy_detect_isa(void) { #ifdef CONFIG_ISA + struct cyclades_card *card; unsigned short cy_isa_irq, nboard; void __iomem *cy_isa_address; - unsigned short i, j, cy_isa_nchan; + unsigned short i, j, k, cy_isa_nchan; int isparam = 0; nboard = 0; @@ -3349,7 +3347,8 @@ static int __init cy_detect_isa(void) } /* fill the next cy_card structure available */ for (j = 0; j < NR_CARDS; j++) { - if (cy_card[j].base_addr == NULL) + card = &cy_card[j]; + if (card->base_addr == NULL) break; } if (j == NR_CARDS) { /* no more cy_cards available */ @@ -3363,7 +3362,7 @@ static int __init cy_detect_isa(void) /* allocate IRQ */ if (request_irq(cy_isa_irq, cyy_interrupt, - 0, "Cyclom-Y", &cy_card[j])) { + 0, "Cyclom-Y", card)) { printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but " "could not allocate IRQ#%d.\n", (unsigned long)cy_isa_address, cy_isa_irq); @@ -3372,16 +3371,16 @@ static int __init cy_detect_isa(void) } /* set cy_card */ - cy_card[j].base_addr = cy_isa_address; - cy_card[j].ctl_addr.p9050 = NULL; - cy_card[j].irq = (int)cy_isa_irq; - cy_card[j].bus_index = 0; - cy_card[j].first_line = cy_next_channel; - cy_card[j].num_chips = cy_isa_nchan / CyPORTS_PER_CHIP; - cy_card[j].nports = cy_isa_nchan; - if (cy_init_card(&cy_card[j])) { - cy_card[j].base_addr = NULL; - free_irq(cy_isa_irq, &cy_card[j]); + card->base_addr = cy_isa_address; + card->ctl_addr.p9050 = NULL; + card->irq = (int)cy_isa_irq; + card->bus_index = 0; + card->first_line = cy_next_channel; + card->num_chips = cy_isa_nchan / CyPORTS_PER_CHIP; + card->nports = cy_isa_nchan; + if (cy_init_card(card)) { + card->base_addr = NULL; + free_irq(cy_isa_irq, card); iounmap(cy_isa_address); continue; } @@ -3393,9 +3392,10 @@ static int __init cy_detect_isa(void) (unsigned long)(cy_isa_address + (CyISA_Ywin - 1)), cy_isa_irq, cy_isa_nchan, cy_next_channel); - for (j = cy_next_channel; - j < cy_next_channel + cy_isa_nchan; j++) - tty_register_device(cy_serial_driver, j, NULL); + for (k = 0, j = cy_next_channel; + j < cy_next_channel + cy_isa_nchan; j++, k++) + tty_port_register_device(&card->ports[k].port, + cy_serial_driver, j, NULL); cy_next_channel += cy_isa_nchan; } return nboard; @@ -3695,10 +3695,11 @@ err: static int __devinit cy_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { + struct cyclades_card *card; void __iomem *addr0 = NULL, *addr2 = NULL; char *card_name = NULL; u32 uninitialized_var(mailbox); - unsigned int device_id, nchan = 0, card_no, i; + unsigned int device_id, nchan = 0, card_no, i, j; unsigned char plx_ver; int retval, irq; @@ -3829,7 +3830,8 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, } /* fill the next cy_card structure available */ for (card_no = 0; card_no < NR_CARDS; card_no++) { - if (cy_card[card_no].base_addr == NULL) + card = &cy_card[card_no]; + if (card->base_addr == NULL) break; } if (card_no == NR_CARDS) { /* no more cy_cards available */ @@ -3843,27 +3845,26 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { /* allocate IRQ */ retval = request_irq(irq, cyy_interrupt, - IRQF_SHARED, "Cyclom-Y", &cy_card[card_no]); + IRQF_SHARED, "Cyclom-Y", card); if (retval) { dev_err(&pdev->dev, "could not allocate IRQ\n"); goto err_unmap; } - cy_card[card_no].num_chips = nchan / CyPORTS_PER_CHIP; + card->num_chips = nchan / CyPORTS_PER_CHIP; } else { struct FIRM_ID __iomem *firm_id = addr2 + ID_ADDRESS; struct ZFW_CTRL __iomem *zfw_ctrl; zfw_ctrl = addr2 + (readl(&firm_id->zfwctrl_addr) & 0xfffff); - cy_card[card_no].hw_ver = mailbox; - cy_card[card_no].num_chips = (unsigned int)-1; - cy_card[card_no].board_ctrl = &zfw_ctrl->board_ctrl; + card->hw_ver = mailbox; + card->num_chips = (unsigned int)-1; + card->board_ctrl = &zfw_ctrl->board_ctrl; #ifdef CONFIG_CYZ_INTR /* allocate IRQ only if board has an IRQ */ if (irq != 0 && irq != 255) { retval = request_irq(irq, cyz_interrupt, - IRQF_SHARED, "Cyclades-Z", - &cy_card[card_no]); + IRQF_SHARED, "Cyclades-Z", card); if (retval) { dev_err(&pdev->dev, "could not allocate IRQ\n"); goto err_unmap; @@ -3873,17 +3874,17 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, } /* set cy_card */ - cy_card[card_no].base_addr = addr2; - cy_card[card_no].ctl_addr.p9050 = addr0; - cy_card[card_no].irq = irq; - cy_card[card_no].bus_index = 1; - cy_card[card_no].first_line = cy_next_channel; - cy_card[card_no].nports = nchan; - retval = cy_init_card(&cy_card[card_no]); + card->base_addr = addr2; + card->ctl_addr.p9050 = addr0; + card->irq = irq; + card->bus_index = 1; + card->first_line = cy_next_channel; + card->nports = nchan; + retval = cy_init_card(card); if (retval) goto err_null; - pci_set_drvdata(pdev, &cy_card[card_no]); + pci_set_drvdata(pdev, card); if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { @@ -3909,14 +3910,15 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from " "port %d.\n", card_name, card_no + 1, nchan, cy_next_channel); - for (i = cy_next_channel; i < cy_next_channel + nchan; i++) - tty_register_device(cy_serial_driver, i, &pdev->dev); + for (j = 0, i = cy_next_channel; i < cy_next_channel + nchan; i++, j++) + tty_port_register_device(&card->ports[j].port, + cy_serial_driver, i, &pdev->dev); cy_next_channel += nchan; return 0; err_null: - cy_card[card_no].base_addr = NULL; - free_irq(irq, &cy_card[card_no]); + card->base_addr = NULL; + free_irq(irq, card); err_unmap: iounmap(addr0); if (addr2) diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c index 4813684cb634..4ab936b7aac6 100644 --- a/drivers/tty/ehv_bytechan.c +++ b/drivers/tty/ehv_bytechan.c @@ -738,16 +738,17 @@ static int __devinit ehv_bc_tty_probe(struct platform_device *pdev) goto error; } - bc->dev = tty_register_device(ehv_bc_driver, i, &pdev->dev); + tty_port_init(&bc->port); + bc->port.ops = &ehv_bc_tty_port_ops; + + bc->dev = tty_port_register_device(&bc->port, ehv_bc_driver, i, + &pdev->dev); if (IS_ERR(bc->dev)) { ret = PTR_ERR(bc->dev); dev_err(&pdev->dev, "could not register tty (ret=%i)\n", ret); goto error; } - tty_port_init(&bc->port); - bc->port.ops = &ehv_bc_tty_port_ops; - dev_set_drvdata(&pdev->dev, bc); dev_info(&pdev->dev, "registered /dev/%s%u for byte channel %u\n", diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index 2d691eb7c40a..7f80f15681cd 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -299,20 +299,33 @@ static void hvc_unthrottle(struct tty_struct *tty) hvc_kick(); } +static int hvc_install(struct tty_driver *driver, struct tty_struct *tty) +{ + struct hvc_struct *hp; + int rc; + + /* Auto increments kref reference if found. */ + if (!(hp = hvc_get_by_index(tty->index))) + return -ENODEV; + + tty->driver_data = hp; + + rc = tty_port_install(&hp->port, driver, tty); + if (rc) + tty_port_put(&hp->port); + return rc; +} + /* * The TTY interface won't be used until after the vio layer has exposed the vty * adapter to the kernel. */ static int hvc_open(struct tty_struct *tty, struct file * filp) { - struct hvc_struct *hp; + struct hvc_struct *hp = tty->driver_data; unsigned long flags; int rc = 0; - /* Auto increments kref reference if found. */ - if (!(hp = hvc_get_by_index(tty->index))) - return -ENODEV; - spin_lock_irqsave(&hp->port.lock, flags); /* Check and then increment for fast path open. */ if (hp->port.count++ > 0) { @@ -322,7 +335,6 @@ static int hvc_open(struct tty_struct *tty, struct file * filp) } /* else count == 0 */ spin_unlock_irqrestore(&hp->port.lock, flags); - tty->driver_data = hp; tty_port_tty_set(&hp->port, tty); if (hp->ops->notifier_add) @@ -389,6 +401,11 @@ static void hvc_close(struct tty_struct *tty, struct file * filp) hp->vtermno, hp->port.count); spin_unlock_irqrestore(&hp->port.lock, flags); } +} + +static void hvc_cleanup(struct tty_struct *tty) +{ + struct hvc_struct *hp = tty->driver_data; tty_port_put(&hp->port); } @@ -792,8 +809,10 @@ static void hvc_poll_put_char(struct tty_driver *driver, int line, char ch) #endif static const struct tty_operations hvc_ops = { + .install = hvc_install, .open = hvc_open, .close = hvc_close, + .cleanup = hvc_cleanup, .write = hvc_write, .hangup = hvc_hangup, .unthrottle = hvc_unthrottle, diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c index d56788c83974..cab5c7adf8e8 100644 --- a/drivers/tty/hvc/hvcs.c +++ b/drivers/tty/hvc/hvcs.c @@ -1102,27 +1102,20 @@ static struct hvcs_struct *hvcs_get_by_index(int index) return NULL; } -/* - * This is invoked via the tty_open interface when a user app connects to the - * /dev node. - */ -static int hvcs_open(struct tty_struct *tty, struct file *filp) +static int hvcs_install(struct tty_driver *driver, struct tty_struct *tty) { struct hvcs_struct *hvcsd; - int rc, retval = 0; - unsigned long flags; - unsigned int irq; struct vio_dev *vdev; - unsigned long unit_address; - - if (tty->driver_data) - goto fast_open; + unsigned long unit_address, flags; + unsigned int irq; + int retval; /* * Is there a vty-server that shares the same index? * This function increments the kref index. */ - if (!(hvcsd = hvcs_get_by_index(tty->index))) { + hvcsd = hvcs_get_by_index(tty->index); + if (!hvcsd) { printk(KERN_WARNING "HVCS: open failed, no device associated" " with tty->index %d.\n", tty->index); return -ENODEV; @@ -1130,11 +1123,16 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp) spin_lock_irqsave(&hvcsd->lock, flags); - if (hvcsd->connected == 0) - if ((retval = hvcs_partner_connect(hvcsd))) - goto error_release; + if (hvcsd->connected == 0) { + retval = hvcs_partner_connect(hvcsd); + if (retval) { + spin_unlock_irqrestore(&hvcsd->lock, flags); + printk(KERN_WARNING "HVCS: partner connect failed.\n"); + goto err_put; + } + } - hvcsd->port.count = 1; + hvcsd->port.count = 0; hvcsd->port.tty = tty; tty->driver_data = hvcsd; @@ -1155,37 +1153,48 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp) * This must be done outside of the spinlock because it requests irqs * and will grab the spinlock and free the connection if it fails. */ - if (((rc = hvcs_enable_device(hvcsd, unit_address, irq, vdev)))) { - tty_port_put(&hvcsd->port); + retval = hvcs_enable_device(hvcsd, unit_address, irq, vdev); + if (retval) { printk(KERN_WARNING "HVCS: enable device failed.\n"); - return rc; + goto err_put; } - goto open_success; + retval = tty_port_install(&hvcsd->port, driver, tty); + if (retval) + goto err_irq; -fast_open: - hvcsd = tty->driver_data; + return 0; +err_irq: + spin_lock_irqsave(&hvcsd->lock, flags); + vio_disable_interrupts(hvcsd->vdev); + spin_unlock_irqrestore(&hvcsd->lock, flags); + free_irq(irq, hvcsd); +err_put: + tty_port_put(&hvcsd->port); + + return retval; +} + +/* + * This is invoked via the tty_open interface when a user app connects to the + * /dev node. + */ +static int hvcs_open(struct tty_struct *tty, struct file *filp) +{ + struct hvcs_struct *hvcsd = tty->driver_data; + unsigned long flags; spin_lock_irqsave(&hvcsd->lock, flags); - tty_port_get(&hvcsd->port); hvcsd->port.count++; hvcsd->todo_mask |= HVCS_SCHED_READ; spin_unlock_irqrestore(&hvcsd->lock, flags); -open_success: hvcs_kick(); printk(KERN_INFO "HVCS: vty-server@%X connection opened.\n", hvcsd->vdev->unit_address ); return 0; - -error_release: - spin_unlock_irqrestore(&hvcsd->lock, flags); - tty_port_put(&hvcsd->port); - - printk(KERN_WARNING "HVCS: partner connect failed.\n"); - return retval; } static void hvcs_close(struct tty_struct *tty, struct file *filp) @@ -1236,7 +1245,6 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp) tty->driver_data = NULL; free_irq(irq, hvcsd); - tty_port_put(&hvcsd->port); return; } else if (hvcsd->port.count < 0) { printk(KERN_ERR "HVCS: vty-server@%X open_count: %d" @@ -1245,6 +1253,12 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp) } spin_unlock_irqrestore(&hvcsd->lock, flags); +} + +static void hvcs_cleanup(struct tty_struct * tty) +{ + struct hvcs_struct *hvcsd = tty->driver_data; + tty_port_put(&hvcsd->port); } @@ -1431,8 +1445,10 @@ static int hvcs_chars_in_buffer(struct tty_struct *tty) } static const struct tty_operations hvcs_ops = { + .install = hvcs_install, .open = hvcs_open, .close = hvcs_close, + .cleanup = hvcs_cleanup, .hangup = hvcs_hangup, .write = hvcs_write, .write_room = hvcs_write_room, diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c index 6f5bc49c441f..0083bc1f63f4 100644 --- a/drivers/tty/hvc/hvsi.c +++ b/drivers/tty/hvc/hvsi.c @@ -1080,6 +1080,8 @@ static int __init hvsi_init(void) struct hvsi_struct *hp = &hvsi_ports[i]; int ret = 1; + tty_port_link_device(&hp->port, hvsi_driver, i); + ret = request_irq(hp->virq, hvsi_interrupt, 0, "hvsi", hp); if (ret) printk(KERN_ERR "HVSI: couldn't reserve irq 0x%x (error %i)\n", diff --git a/drivers/tty/hvc/hvsi_lib.c b/drivers/tty/hvc/hvsi_lib.c index 59c135dd5d20..3396eb9d57a3 100644 --- a/drivers/tty/hvc/hvsi_lib.c +++ b/drivers/tty/hvc/hvsi_lib.c @@ -400,7 +400,7 @@ void hvsilib_close(struct hvsi_priv *pv, struct hvc_struct *hp) spin_unlock_irqrestore(&hp->lock, flags); /* Clear our own DTR */ - if (!pv->tty || (pv->tty->termios->c_cflag & HUPCL)) + if (!pv->tty || (pv->tty->termios.c_cflag & HUPCL)) hvsilib_write_mctrl(pv, 0); /* Tear down the connection */ diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c index f8b5fa0093a3..160f0ad9589d 100644 --- a/drivers/tty/ipwireless/tty.c +++ b/drivers/tty/ipwireless/tty.c @@ -476,7 +476,7 @@ static int add_tty(int j, mutex_init(&ttys[j]->ipw_tty_mutex); tty_port_init(&ttys[j]->port); - tty_register_device(ipw_tty_driver, j, NULL); + tty_port_register_device(&ttys[j]->port, ipw_tty_driver, j, NULL); ipwireless_associate_network_tty(network, channel_idx, ttys[j]); if (secondary_channel_idx != -1) diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c index e1235accab74..d7492e183607 100644 --- a/drivers/tty/isicom.c +++ b/drivers/tty/isicom.c @@ -600,7 +600,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id) port->status &= ~ISI_DCD; } - if (port->port.flags & ASYNC_CTS_FLOW) { + if (tty_port_cts_enabled(&port->port)) { if (tty->hw_stopped) { if (header & ISI_CTS) { port->port.tty->hw_stopped = 0; @@ -702,7 +702,7 @@ static void isicom_config_port(struct tty_struct *tty) /* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */ if (baud < 1 || baud > 4) - tty->termios->c_cflag &= ~CBAUDEX; + tty->termios.c_cflag &= ~CBAUDEX; else baud += 15; } @@ -1196,8 +1196,8 @@ static void isicom_set_termios(struct tty_struct *tty, if (isicom_paranoia_check(port, tty->name, "isicom_set_termios")) return; - if (tty->termios->c_cflag == old_termios->c_cflag && - tty->termios->c_iflag == old_termios->c_iflag) + if (tty->termios.c_cflag == old_termios->c_cflag && + tty->termios.c_iflag == old_termios->c_iflag) return; spin_lock_irqsave(&port->card->card_lock, flags); @@ -1205,7 +1205,7 @@ static void isicom_set_termios(struct tty_struct *tty, spin_unlock_irqrestore(&port->card->card_lock, flags); if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { + !(tty->termios.c_cflag & CRTSCTS)) { tty->hw_stopped = 0; isicom_start(tty); } @@ -1611,7 +1611,8 @@ static int __devinit isicom_probe(struct pci_dev *pdev, goto errunri; for (index = 0; index < board->port_count; index++) - tty_register_device(isicom_normal, board->index * 16 + index, + tty_port_register_device(&board->ports[index].port, + isicom_normal, board->index * 16 + index, &pdev->dev); return 0; diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c index 324467d28a54..56e616b9109a 100644 --- a/drivers/tty/moxa.c +++ b/drivers/tty/moxa.c @@ -169,6 +169,7 @@ static DEFINE_SPINLOCK(moxa_lock); static unsigned long baseaddr[MAX_BOARDS]; static unsigned int type[MAX_BOARDS]; static unsigned int numports[MAX_BOARDS]; +static struct tty_port moxa_service_port; MODULE_AUTHOR("William Chen"); MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver"); @@ -367,10 +368,10 @@ static int moxa_ioctl(struct tty_struct *tty, tmp.dcd = 1; ttyp = tty_port_tty_get(&p->port); - if (!ttyp || !ttyp->termios) + if (!ttyp) tmp.cflag = p->cflag; else - tmp.cflag = ttyp->termios->c_cflag; + tmp.cflag = ttyp->termios.c_cflag; tty_kref_put(ttyp); copy: if (copy_to_user(argm, &tmp, sizeof(tmp))) @@ -834,7 +835,7 @@ static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev) const struct firmware *fw; const char *file; struct moxa_port *p; - unsigned int i; + unsigned int i, first_idx; int ret; brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports), @@ -887,6 +888,11 @@ static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev) mod_timer(&moxaTimer, jiffies + HZ / 50); spin_unlock_bh(&moxa_lock); + first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD; + for (i = 0; i < brd->numPorts; i++) + tty_port_register_device(&brd->ports[i].port, moxaDriver, + first_idx + i, dev); + return 0; err_free: kfree(brd->ports); @@ -896,7 +902,7 @@ err: static void moxa_board_deinit(struct moxa_board_conf *brd) { - unsigned int a, opened; + unsigned int a, opened, first_idx; mutex_lock(&moxa_openlock); spin_lock_bh(&moxa_lock); @@ -925,6 +931,10 @@ static void moxa_board_deinit(struct moxa_board_conf *brd) mutex_lock(&moxa_openlock); } + first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD; + for (a = 0; a < brd->numPorts; a++) + tty_unregister_device(moxaDriver, first_idx + a); + iounmap(brd->basemem); brd->basemem = NULL; kfree(brd->ports); @@ -967,6 +977,7 @@ static int __devinit moxa_pci_probe(struct pci_dev *pdev, board->basemem = ioremap_nocache(pci_resource_start(pdev, 2), 0x4000); if (board->basemem == NULL) { dev_err(&pdev->dev, "can't remap io space 2\n"); + retval = -ENOMEM; goto err_reg; } @@ -1031,9 +1042,14 @@ static int __init moxa_init(void) printk(KERN_INFO "MOXA Intellio family driver version %s\n", MOXA_VERSION); - moxaDriver = alloc_tty_driver(MAX_PORTS + 1); - if (!moxaDriver) - return -ENOMEM; + + tty_port_init(&moxa_service_port); + + moxaDriver = tty_alloc_driver(MAX_PORTS + 1, + TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_DEV); + if (IS_ERR(moxaDriver)) + return PTR_ERR(moxaDriver); moxaDriver->name = "ttyMX"; moxaDriver->major = ttymajor; @@ -1044,8 +1060,9 @@ static int __init moxa_init(void) moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL; moxaDriver->init_termios.c_ispeed = 9600; moxaDriver->init_termios.c_ospeed = 9600; - moxaDriver->flags = TTY_DRIVER_REAL_RAW; tty_set_operations(moxaDriver, &moxa_ops); + /* Having one more port only for ioctls is ugly */ + tty_port_link_device(&moxa_service_port, moxaDriver, MAX_PORTS); if (tty_register_driver(moxaDriver)) { printk(KERN_ERR "can't register MOXA Smartio tty driver!\n"); @@ -1178,7 +1195,7 @@ static int moxa_open(struct tty_struct *tty, struct file *filp) mutex_lock(&ch->port.mutex); if (!(ch->port.flags & ASYNC_INITIALIZED)) { ch->statusflags = 0; - moxa_set_tty_param(tty, tty->termios); + moxa_set_tty_param(tty, &tty->termios); MoxaPortLineCtrl(ch, 1, 1); MoxaPortEnable(ch); MoxaSetFifo(ch, ch->type == PORT_16550A); @@ -1193,7 +1210,7 @@ static int moxa_open(struct tty_struct *tty, struct file *filp) static void moxa_close(struct tty_struct *tty, struct file *filp) { struct moxa_port *ch = tty->driver_data; - ch->cflag = tty->termios->c_cflag; + ch->cflag = tty->termios.c_cflag; tty_port_close(&ch->port, tty, filp); } @@ -1464,7 +1481,7 @@ static void moxa_poll(unsigned long ignored) static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios) { - register struct ktermios *ts = tty->termios; + register struct ktermios *ts = &tty->termios; struct moxa_port *ch = tty->driver_data; int rts, cts, txflow, rxflow, xany, baud; diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 90cc680c4f0e..cfda47dabd28 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -643,7 +643,7 @@ static int mxser_change_speed(struct tty_struct *tty, int ret = 0; unsigned char status; - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; if (!info->ioaddr) return ret; @@ -830,7 +830,7 @@ static void mxser_check_modem_status(struct tty_struct *tty, wake_up_interruptible(&port->port.open_wait); } - if (port->port.flags & ASYNC_CTS_FLOW) { + if (tty_port_cts_enabled(&port->port)) { if (tty->hw_stopped) { if (status & UART_MSR_CTS) { tty->hw_stopped = 0; @@ -1520,10 +1520,10 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) tty = tty_port_tty_get(port); - if (!tty || !tty->termios) + if (!tty) ms.cflag = ip->normal_termios.c_cflag; else - ms.cflag = tty->termios->c_cflag; + ms.cflag = tty->termios.c_cflag; tty_kref_put(tty); spin_lock_irq(&ip->slock); status = inb(ip->ioaddr + UART_MSR); @@ -1589,13 +1589,13 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) tty = tty_port_tty_get(&ip->port); - if (!tty || !tty->termios) { + if (!tty) { cflag = ip->normal_termios.c_cflag; iflag = ip->normal_termios.c_iflag; me->baudrate[p] = tty_termios_baud_rate(&ip->normal_termios); } else { - cflag = tty->termios->c_cflag; - iflag = tty->termios->c_iflag; + cflag = tty->termios.c_cflag; + iflag = tty->termios.c_iflag; me->baudrate[p] = tty_get_baud_rate(tty); } tty_kref_put(tty); @@ -1853,7 +1853,7 @@ static void mxser_stoprx(struct tty_struct *tty) } } - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { info->MCR &= ~UART_MCR_RTS; outb(info->MCR, info->ioaddr + UART_MCR); } @@ -1890,7 +1890,7 @@ static void mxser_unthrottle(struct tty_struct *tty) } } - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { info->MCR |= UART_MCR_RTS; outb(info->MCR, info->ioaddr + UART_MCR); } @@ -1939,14 +1939,14 @@ static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termi spin_unlock_irqrestore(&info->slock, flags); if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { + !(tty->termios.c_cflag & CRTSCTS)) { tty->hw_stopped = 0; mxser_start(tty); } /* Handle sw stopped */ if ((old_termios->c_iflag & IXON) && - !(tty->termios->c_iflag & IXON)) { + !(tty->termios.c_iflag & IXON)) { tty->stopped = 0; if (info->board->chip_flag) { @@ -2337,11 +2337,36 @@ static struct tty_port_operations mxser_port_ops = { * The MOXA Smartio/Industio serial driver boot-time initialization code! */ +static bool allow_overlapping_vector; +module_param(allow_overlapping_vector, bool, S_IRUGO); +MODULE_PARM_DESC(allow_overlapping_vector, "whether we allow ISA cards to be configured such that vector overlabs IO ports (default=no)"); + +static bool mxser_overlapping_vector(struct mxser_board *brd) +{ + return allow_overlapping_vector && + brd->vector >= brd->ports[0].ioaddr && + brd->vector < brd->ports[0].ioaddr + 8 * brd->info->nports; +} + +static int mxser_request_vector(struct mxser_board *brd) +{ + if (mxser_overlapping_vector(brd)) + return 0; + return request_region(brd->vector, 1, "mxser(vector)") ? 0 : -EIO; +} + +static void mxser_release_vector(struct mxser_board *brd) +{ + if (mxser_overlapping_vector(brd)) + return; + release_region(brd->vector, 1); +} + static void mxser_release_ISA_res(struct mxser_board *brd) { free_irq(brd->irq, brd); release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); - release_region(brd->vector, 1); + mxser_release_vector(brd); } static int __devinit mxser_initbrd(struct mxser_board *brd, @@ -2396,7 +2421,7 @@ static int __devinit mxser_initbrd(struct mxser_board *brd, static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd) { - int id, i, bits; + int id, i, bits, ret; unsigned short regs[16], irq; unsigned char scratch, scratch2; @@ -2492,13 +2517,15 @@ static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd) 8 * brd->info->nports - 1); return -EIO; } - if (!request_region(brd->vector, 1, "mxser(vector)")) { + + ret = mxser_request_vector(brd); + if (ret) { release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); printk(KERN_ERR "mxser: can't request interrupt vector region: " "0x%.8lx-0x%.8lx\n", brd->ports[0].ioaddr, brd->ports[0].ioaddr + 8 * brd->info->nports - 1); - return -EIO; + return ret; } return brd->info->nports; @@ -2598,7 +2625,8 @@ static int __devinit mxser_probe(struct pci_dev *pdev, goto err_rel3; for (i = 0; i < brd->info->nports; i++) - tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev); + tty_port_register_device(&brd->ports[i].port, mxvar_sdriver, + brd->idx + i, &pdev->dev); pci_set_drvdata(pdev, brd); @@ -2695,7 +2723,8 @@ static int __init mxser_module_init(void) brd->idx = m * MXSER_PORTS_PER_BOARD; for (i = 0; i < brd->info->nports; i++) - tty_register_device(mxvar_sdriver, brd->idx + i, NULL); + tty_port_register_device(&brd->ports[i].port, + mxvar_sdriver, brd->idx + i, NULL); m++; } diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index c43b683b6eb8..3e210a430fb3 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -108,7 +108,7 @@ struct gsm_mux_net { */ struct gsm_msg { - struct gsm_msg *next; + struct list_head list; u8 addr; /* DLCI address + flags */ u8 ctrl; /* Control byte + flags */ unsigned int len; /* Length of data block (can be zero) */ @@ -245,8 +245,7 @@ struct gsm_mux { unsigned int tx_bytes; /* TX data outstanding */ #define TX_THRESH_HI 8192 #define TX_THRESH_LO 2048 - struct gsm_msg *tx_head; /* Pending data packets */ - struct gsm_msg *tx_tail; + struct list_head tx_list; /* Pending data packets */ /* Control messages */ struct timer_list t2_timer; /* Retransmit timer for commands */ @@ -663,7 +662,7 @@ static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len, m->len = len; m->addr = addr; m->ctrl = ctrl; - m->next = NULL; + INIT_LIST_HEAD(&m->list); return m; } @@ -673,22 +672,21 @@ static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len, * * The tty device has called us to indicate that room has appeared in * the transmit queue. Ram more data into the pipe if we have any + * If we have been flow-stopped by a CMD_FCOFF, then we can only + * send messages on DLCI0 until CMD_FCON * * FIXME: lock against link layer control transmissions */ static void gsm_data_kick(struct gsm_mux *gsm) { - struct gsm_msg *msg = gsm->tx_head; + struct gsm_msg *msg, *nmsg; int len; int skip_sof = 0; - /* FIXME: We need to apply this solely to data messages */ - if (gsm->constipated) - return; - - while (gsm->tx_head != NULL) { - msg = gsm->tx_head; + list_for_each_entry_safe(msg, nmsg, &gsm->tx_list, list) { + if (gsm->constipated && msg->addr) + continue; if (gsm->encoding != 0) { gsm->txframe[0] = GSM1_SOF; len = gsm_stuff_frame(msg->data, @@ -711,14 +709,13 @@ static void gsm_data_kick(struct gsm_mux *gsm) len - skip_sof) < 0) break; /* FIXME: Can eliminate one SOF in many more cases */ - gsm->tx_head = msg->next; - if (gsm->tx_head == NULL) - gsm->tx_tail = NULL; gsm->tx_bytes -= msg->len; - kfree(msg); /* For a burst of frames skip the extra SOF within the burst */ skip_sof = 1; + + list_del(&msg->list); + kfree(msg); } } @@ -768,11 +765,7 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg) msg->data = dp; /* Add to the actual output queue */ - if (gsm->tx_tail) - gsm->tx_tail->next = msg; - else - gsm->tx_head = msg; - gsm->tx_tail = msg; + list_add_tail(&msg->list, &gsm->tx_list); gsm->tx_bytes += msg->len; gsm_data_kick(gsm); } @@ -875,7 +868,7 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm, /* dlci->skb is locked by tx_lock */ if (dlci->skb == NULL) { - dlci->skb = skb_dequeue(&dlci->skb_list); + dlci->skb = skb_dequeue_tail(&dlci->skb_list); if (dlci->skb == NULL) return 0; first = 1; @@ -886,7 +879,7 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm, if (len > gsm->mtu) { if (dlci->adaption == 3) { /* Over long frame, bin it */ - kfree_skb(dlci->skb); + dev_kfree_skb_any(dlci->skb); dlci->skb = NULL; return 0; } @@ -899,8 +892,11 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm, /* FIXME: need a timer or something to kick this so it can't get stuck with no work outstanding and no buffer free */ - if (msg == NULL) + if (msg == NULL) { + skb_queue_tail(&dlci->skb_list, dlci->skb); + dlci->skb = NULL; return -ENOMEM; + } dp = msg->data; if (dlci->adaption == 4) { /* Interruptible framed (Packetised Data) */ @@ -912,7 +908,7 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm, skb_pull(dlci->skb, len); __gsm_data_queue(dlci, msg); if (last) { - kfree_skb(dlci->skb); + dev_kfree_skb_any(dlci->skb); dlci->skb = NULL; } return size; @@ -971,16 +967,22 @@ static void gsm_dlci_data_sweep(struct gsm_mux *gsm) static void gsm_dlci_data_kick(struct gsm_dlci *dlci) { unsigned long flags; + int sweep; + + if (dlci->constipated) + return; spin_lock_irqsave(&dlci->gsm->tx_lock, flags); /* If we have nothing running then we need to fire up */ + sweep = (dlci->gsm->tx_bytes < TX_THRESH_LO); if (dlci->gsm->tx_bytes == 0) { if (dlci->net) gsm_dlci_data_output_framed(dlci->gsm, dlci); else gsm_dlci_data_output(dlci->gsm, dlci); - } else if (dlci->gsm->tx_bytes < TX_THRESH_LO) - gsm_dlci_data_sweep(dlci->gsm); + } + if (sweep) + gsm_dlci_data_sweep(dlci->gsm); spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags); } @@ -1027,6 +1029,7 @@ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci, { int mlines = 0; u8 brk = 0; + int fc; /* The modem status command can either contain one octet (v.24 signals) or two octets (v.24 signals + break signals). The length field will @@ -1038,19 +1041,21 @@ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci, else { brk = modem & 0x7f; modem = (modem >> 7) & 0x7f; - }; + } /* Flow control/ready to communicate */ - if (modem & MDM_FC) { + fc = (modem & MDM_FC) || !(modem & MDM_RTR); + if (fc && !dlci->constipated) { /* Need to throttle our output on this device */ dlci->constipated = 1; - } - if (modem & MDM_RTC) { - mlines |= TIOCM_DSR | TIOCM_DTR; + } else if (!fc && dlci->constipated) { dlci->constipated = 0; gsm_dlci_data_kick(dlci); } + /* Map modem bits */ + if (modem & MDM_RTC) + mlines |= TIOCM_DSR | TIOCM_DTR; if (modem & MDM_RTR) mlines |= TIOCM_RTS | TIOCM_CTS; if (modem & MDM_IC) @@ -1061,7 +1066,7 @@ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci, /* Carrier drop -> hangup */ if (tty) { if ((mlines & TIOCM_CD) == 0 && (dlci->modem_rx & TIOCM_CD)) - if (!(tty->termios->c_cflag & CLOCAL)) + if (!(tty->termios.c_cflag & CLOCAL)) tty_hangup(tty); if (brk & 0x01) tty_insert_flip_char(tty, 0, TTY_BREAK); @@ -1190,6 +1195,8 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command, u8 *data, int clen) { u8 buf[1]; + unsigned long flags; + switch (command) { case CMD_CLD: { struct gsm_dlci *dlci = gsm->dlci[0]; @@ -1206,16 +1213,18 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command, gsm_control_reply(gsm, CMD_TEST, data, clen); break; case CMD_FCON: - /* Modem wants us to STFU */ - gsm->constipated = 1; - gsm_control_reply(gsm, CMD_FCON, NULL, 0); - break; - case CMD_FCOFF: /* Modem can accept data again */ gsm->constipated = 0; - gsm_control_reply(gsm, CMD_FCOFF, NULL, 0); + gsm_control_reply(gsm, CMD_FCON, NULL, 0); /* Kick the link in case it is idling */ + spin_lock_irqsave(&gsm->tx_lock, flags); gsm_data_kick(gsm); + spin_unlock_irqrestore(&gsm->tx_lock, flags); + break; + case CMD_FCOFF: + /* Modem wants us to STFU */ + gsm->constipated = 1; + gsm_control_reply(gsm, CMD_FCOFF, NULL, 0); break; case CMD_MSC: /* Out of band modem line change indicator for a DLCI */ @@ -1668,7 +1677,7 @@ static void gsm_dlci_free(struct kref *ref) dlci->gsm->dlci[dlci->addr] = NULL; kfifo_free(dlci->fifo); while ((dlci->skb = skb_dequeue(&dlci->skb_list))) - kfree_skb(dlci->skb); + dev_kfree_skb(dlci->skb); kfree(dlci); } @@ -2007,7 +2016,7 @@ void gsm_cleanup_mux(struct gsm_mux *gsm) { int i; struct gsm_dlci *dlci = gsm->dlci[0]; - struct gsm_msg *txq; + struct gsm_msg *txq, *ntxq; struct gsm_control *gc; gsm->dead = 1; @@ -2042,11 +2051,9 @@ void gsm_cleanup_mux(struct gsm_mux *gsm) if (gsm->dlci[i]) gsm_dlci_release(gsm->dlci[i]); /* Now wipe the queues */ - for (txq = gsm->tx_head; txq != NULL; txq = gsm->tx_head) { - gsm->tx_head = txq->next; + list_for_each_entry_safe(txq, ntxq, &gsm->tx_list, list) kfree(txq); - } - gsm->tx_tail = NULL; + INIT_LIST_HEAD(&gsm->tx_list); } EXPORT_SYMBOL_GPL(gsm_cleanup_mux); @@ -2157,6 +2164,7 @@ struct gsm_mux *gsm_alloc_mux(void) } spin_lock_init(&gsm->lock); kref_init(&gsm->ref); + INIT_LIST_HEAD(&gsm->tx_list); gsm->t1 = T1; gsm->t2 = T2; @@ -2273,7 +2281,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp, gsm->error(gsm, *dp, flags); break; default: - WARN_ONCE("%s: unknown flag %d\n", + WARN_ONCE(1, "%s: unknown flag %d\n", tty_name(tty, buf), flags); break; } @@ -2377,12 +2385,12 @@ static void gsmld_write_wakeup(struct tty_struct *tty) /* Queue poll */ clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + spin_lock_irqsave(&gsm->tx_lock, flags); gsm_data_kick(gsm); if (gsm->tx_bytes < TX_THRESH_LO) { - spin_lock_irqsave(&gsm->tx_lock, flags); gsm_dlci_data_sweep(gsm); - spin_unlock_irqrestore(&gsm->tx_lock, flags); } + spin_unlock_irqrestore(&gsm->tx_lock, flags); } /** @@ -2868,14 +2876,14 @@ static const struct tty_port_operations gsm_port_ops = { .dtr_rts = gsm_dtr_rts, }; - -static int gsmtty_open(struct tty_struct *tty, struct file *filp) +static int gsmtty_install(struct tty_driver *driver, struct tty_struct *tty) { struct gsm_mux *gsm; struct gsm_dlci *dlci; - struct tty_port *port; unsigned int line = tty->index; unsigned int mux = line >> 6; + bool alloc = false; + int ret; line = line & 0x3F; @@ -2889,14 +2897,35 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp) gsm = gsm_mux[mux]; if (gsm->dead) return -EL2HLT; + /* If DLCI 0 is not yet fully open return an error. This is ok from a locking + perspective as we don't have to worry about this if DLCI0 is lost */ + if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN) + return -EL2NSYNC; dlci = gsm->dlci[line]; - if (dlci == NULL) + if (dlci == NULL) { + alloc = true; dlci = gsm_dlci_alloc(gsm, line); + } if (dlci == NULL) return -ENOMEM; - port = &dlci->port; - port->count++; + ret = tty_port_install(&dlci->port, driver, tty); + if (ret) { + if (alloc) + dlci_put(dlci); + return ret; + } + tty->driver_data = dlci; + + return 0; +} + +static int gsmtty_open(struct tty_struct *tty, struct file *filp) +{ + struct gsm_dlci *dlci = tty->driver_data; + struct tty_port *port = &dlci->port; + + port->count++; dlci_get(dlci); dlci_get(dlci->gsm->dlci[0]); mux_get(dlci->gsm); @@ -3043,13 +3072,13 @@ static void gsmtty_set_termios(struct tty_struct *tty, struct ktermios *old) the RPN control message. This however rapidly gets nasty as we then have to remap modem signals each way according to whether our virtual cable is null modem etc .. */ - tty_termios_copy_hw(tty->termios, old); + tty_termios_copy_hw(&tty->termios, old); } static void gsmtty_throttle(struct tty_struct *tty) { struct gsm_dlci *dlci = tty->driver_data; - if (tty->termios->c_cflag & CRTSCTS) + if (tty->termios.c_cflag & CRTSCTS) dlci->modem_tx &= ~TIOCM_DTR; dlci->throttled = 1; /* Send an MSC with DTR cleared */ @@ -3059,7 +3088,7 @@ static void gsmtty_throttle(struct tty_struct *tty) static void gsmtty_unthrottle(struct tty_struct *tty) { struct gsm_dlci *dlci = tty->driver_data; - if (tty->termios->c_cflag & CRTSCTS) + if (tty->termios.c_cflag & CRTSCTS) dlci->modem_tx |= TIOCM_DTR; dlci->throttled = 0; /* Send an MSC with DTR set */ @@ -3085,6 +3114,7 @@ static int gsmtty_break_ctl(struct tty_struct *tty, int state) /* Virtual ttys for the demux */ static const struct tty_operations gsmtty_ops = { + .install = gsmtty_install, .open = gsmtty_open, .close = gsmtty_close, .write = gsmtty_write, diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c index 5c6c31459a2f..1e6405070ce6 100644 --- a/drivers/tty/n_r3964.c +++ b/drivers/tty/n_r3964.c @@ -1065,7 +1065,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, TRACE_L("read()"); - tty_lock(); + tty_lock(tty); pClient = findClient(pInfo, task_pid(current)); if (pClient) { @@ -1077,7 +1077,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, goto unlock; } /* block until there is a message: */ - wait_event_interruptible_tty(pInfo->read_wait, + wait_event_interruptible_tty(tty, pInfo->read_wait, (pMsg = remove_msg(pInfo, pClient))); } @@ -1107,7 +1107,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, } ret = -EPERM; unlock: - tty_unlock(); + tty_unlock(tty); return ret; } @@ -1156,7 +1156,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file, pHeader->locks = 0; pHeader->owner = NULL; - tty_lock(); + tty_lock(tty); pClient = findClient(pInfo, task_pid(current)); if (pClient) { @@ -1175,7 +1175,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file, add_tx_queue(pInfo, pHeader); trigger_transmit(pInfo); - tty_unlock(); + tty_unlock(tty); return 0; } diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index ee1c268f5f9d..8c0b7b42319c 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -92,10 +92,18 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x, static void n_tty_set_room(struct tty_struct *tty) { - /* tty->read_cnt is not read locked ? */ - int left = N_TTY_BUF_SIZE - tty->read_cnt - 1; + int left; int old_left; + /* tty->read_cnt is not read locked ? */ + if (I_PARMRK(tty)) { + /* Multiply read_cnt by 3, since each byte might take up to + * three times as many spaces when PARMRK is set (depending on + * its flags, e.g. parity error). */ + left = N_TTY_BUF_SIZE - tty->read_cnt * 3 - 1; + } else + left = N_TTY_BUF_SIZE - tty->read_cnt - 1; + /* * If we are doing input canonicalization, and there are no * pending newlines, let characters through without limit, so @@ -1432,6 +1440,12 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, */ if (tty->receive_room < TTY_THRESHOLD_THROTTLE) tty_throttle(tty); + + /* FIXME: there is a tiny race here if the receive room check runs + before the other work executes and empties the buffer (upping + the receiving room and unthrottling. We then throttle and get + stuck. This has been observed and traced down by Vincent Pillet/ + We need to address this when we sort out out the rx path locking */ } int is_ignored(int sig) @@ -1460,7 +1474,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) BUG_ON(!tty); if (old) - canon_change = (old->c_lflag ^ tty->termios->c_lflag) & ICANON; + canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON; if (canon_change) { memset(&tty->read_flags, 0, sizeof tty->read_flags); tty->canon_head = tty->read_tail; @@ -1728,7 +1742,8 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, do_it_again: - BUG_ON(!tty->read_buf); + if (WARN_ON(!tty->read_buf)) + return -EAGAIN; c = job_control(tty, file); if (c < 0) @@ -1832,13 +1847,13 @@ do_it_again: if (tty->icanon && !L_EXTPROC(tty)) { /* N.B. avoid overrun if nr == 0 */ + spin_lock_irqsave(&tty->read_lock, flags); while (nr && tty->read_cnt) { int eol; eol = test_and_clear_bit(tty->read_tail, tty->read_flags); c = tty->read_buf[tty->read_tail]; - spin_lock_irqsave(&tty->read_lock, flags); tty->read_tail = ((tty->read_tail+1) & (N_TTY_BUF_SIZE-1)); tty->read_cnt--; @@ -1856,15 +1871,19 @@ do_it_again: if (tty_put_user(tty, c, b++)) { retval = -EFAULT; b--; + spin_lock_irqsave(&tty->read_lock, flags); break; } nr--; } if (eol) { tty_audit_push(tty); + spin_lock_irqsave(&tty->read_lock, flags); break; } + spin_lock_irqsave(&tty->read_lock, flags); } + spin_unlock_irqrestore(&tty->read_lock, flags); if (retval) break; } else { diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c index e7592f9037da..b917c9424954 100644 --- a/drivers/tty/nozomi.c +++ b/drivers/tty/nozomi.c @@ -1473,8 +1473,8 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, port->dc = dc; tty_port_init(&port->port); port->port.ops = &noz_tty_port_ops; - tty_dev = tty_register_device(ntty_driver, dc->index_start + i, - &pdev->dev); + tty_dev = tty_port_register_device(&port->port, ntty_driver, + dc->index_start + i, &pdev->dev); if (IS_ERR(tty_dev)) { ret = PTR_ERR(tty_dev); diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 5505ffc91da4..2bace847eb39 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -47,6 +47,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp) wake_up_interruptible(&tty->read_wait); wake_up_interruptible(&tty->write_wait); tty->packet = 0; + /* Review - krefs on tty_link ?? */ if (!tty->link) return; tty->link->packet = 0; @@ -62,9 +63,9 @@ static void pty_close(struct tty_struct *tty, struct file *filp) mutex_unlock(&devpts_mutex); } #endif - tty_unlock(); + tty_unlock(tty); tty_vhangup(tty->link); - tty_lock(); + tty_lock(tty); } } @@ -231,8 +232,8 @@ out: static void pty_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - tty->termios->c_cflag &= ~(CSIZE | PARENB); - tty->termios->c_cflag |= (CS8 | CREAD); + tty->termios.c_cflag &= ~(CSIZE | PARENB); + tty->termios.c_cflag |= (CS8 | CREAD); } /** @@ -282,60 +283,110 @@ done: return 0; } -/* Traditional BSD devices */ -#ifdef CONFIG_LEGACY_PTYS - -static int pty_install(struct tty_driver *driver, struct tty_struct *tty) +/** + * pty_common_install - set up the pty pair + * @driver: the pty driver + * @tty: the tty being instantiated + * @bool: legacy, true if this is BSD style + * + * Perform the initial set up for the tty/pty pair. Called from the + * tty layer when the port is first opened. + * + * Locking: the caller must hold the tty_mutex + */ +static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty, + bool legacy) { struct tty_struct *o_tty; + struct tty_port *ports[2]; int idx = tty->index; - int retval; + int retval = -ENOMEM; o_tty = alloc_tty_struct(); if (!o_tty) - return -ENOMEM; + goto err; + ports[0] = kmalloc(sizeof **ports, GFP_KERNEL); + ports[1] = kmalloc(sizeof **ports, GFP_KERNEL); + if (!ports[0] || !ports[1]) + goto err_free_tty; if (!try_module_get(driver->other->owner)) { /* This cannot in fact currently happen */ - retval = -ENOMEM; goto err_free_tty; } initialize_tty_struct(o_tty, driver->other, idx); - /* We always use new tty termios data so we can do this - the easy way .. */ - retval = tty_init_termios(tty); - if (retval) - goto err_deinit_tty; - - retval = tty_init_termios(o_tty); - if (retval) - goto err_free_termios; + if (legacy) { + /* We always use new tty termios data so we can do this + the easy way .. */ + retval = tty_init_termios(tty); + if (retval) + goto err_deinit_tty; + + retval = tty_init_termios(o_tty); + if (retval) + goto err_free_termios; + + driver->other->ttys[idx] = o_tty; + driver->ttys[idx] = tty; + } else { + memset(&tty->termios_locked, 0, sizeof(tty->termios_locked)); + tty->termios = driver->init_termios; + memset(&o_tty->termios_locked, 0, sizeof(tty->termios_locked)); + o_tty->termios = driver->other->init_termios; + } /* * Everything allocated ... set up the o_tty structure. */ - driver->other->ttys[idx] = o_tty; tty_driver_kref_get(driver->other); if (driver->subtype == PTY_TYPE_MASTER) o_tty->count++; /* Establish the links in both directions */ tty->link = o_tty; o_tty->link = tty; + tty_port_init(ports[0]); + tty_port_init(ports[1]); + o_tty->port = ports[0]; + tty->port = ports[1]; tty_driver_kref_get(driver); tty->count++; - driver->ttys[idx] = tty; return 0; err_free_termios: - tty_free_termios(tty); + if (legacy) + tty_free_termios(tty); err_deinit_tty: deinitialize_tty_struct(o_tty); module_put(o_tty->driver->owner); err_free_tty: + kfree(ports[0]); + kfree(ports[1]); free_tty_struct(o_tty); +err: return retval; } +static void pty_cleanup(struct tty_struct *tty) +{ + kfree(tty->port); +} + +/* Traditional BSD devices */ +#ifdef CONFIG_LEGACY_PTYS + +static int pty_install(struct tty_driver *driver, struct tty_struct *tty) +{ + return pty_common_install(driver, tty, true); +} + +static void pty_remove(struct tty_driver *driver, struct tty_struct *tty) +{ + struct tty_struct *pair = tty->link; + driver->ttys[tty->index] = NULL; + if (pair) + pair->driver->ttys[pair->index] = NULL; +} + static int pty_bsd_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { @@ -366,7 +417,9 @@ static const struct tty_operations master_pty_ops_bsd = { .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, .ioctl = pty_bsd_ioctl, - .resize = pty_resize + .cleanup = pty_cleanup, + .resize = pty_resize, + .remove = pty_remove }; static const struct tty_operations slave_pty_ops_bsd = { @@ -379,7 +432,9 @@ static const struct tty_operations slave_pty_ops_bsd = { .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, - .resize = pty_resize + .cleanup = pty_cleanup, + .resize = pty_resize, + .remove = pty_remove }; static void __init legacy_pty_init(void) @@ -389,12 +444,18 @@ static void __init legacy_pty_init(void) if (legacy_count <= 0) return; - pty_driver = alloc_tty_driver(legacy_count); - if (!pty_driver) + pty_driver = tty_alloc_driver(legacy_count, + TTY_DRIVER_RESET_TERMIOS | + TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_ALLOC); + if (IS_ERR(pty_driver)) panic("Couldn't allocate pty driver"); - pty_slave_driver = alloc_tty_driver(legacy_count); - if (!pty_slave_driver) + pty_slave_driver = tty_alloc_driver(legacy_count, + TTY_DRIVER_RESET_TERMIOS | + TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_ALLOC); + if (IS_ERR(pty_slave_driver)) panic("Couldn't allocate pty slave driver"); pty_driver->driver_name = "pty_master"; @@ -410,7 +471,6 @@ static void __init legacy_pty_init(void) pty_driver->init_termios.c_lflag = 0; pty_driver->init_termios.c_ispeed = 38400; pty_driver->init_termios.c_ospeed = 38400; - pty_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW; pty_driver->other = pty_slave_driver; tty_set_operations(pty_driver, &master_pty_ops_bsd); @@ -424,8 +484,6 @@ static void __init legacy_pty_init(void) pty_slave_driver->init_termios.c_cflag = B38400 | CS8 | CREAD; pty_slave_driver->init_termios.c_ispeed = 38400; pty_slave_driver->init_termios.c_ospeed = 38400; - pty_slave_driver->flags = TTY_DRIVER_RESET_TERMIOS | - TTY_DRIVER_REAL_RAW; pty_slave_driver->other = pty_driver; tty_set_operations(pty_slave_driver, &slave_pty_ops_bsd); @@ -497,78 +555,22 @@ static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver, return tty; } -static void pty_unix98_shutdown(struct tty_struct *tty) -{ - tty_driver_remove_tty(tty->driver, tty); - /* We have our own method as we don't use the tty index */ - kfree(tty->termios); -} - /* We have no need to install and remove our tty objects as devpts does all the work for us */ static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty) { - struct tty_struct *o_tty; - int idx = tty->index; - - o_tty = alloc_tty_struct(); - if (!o_tty) - return -ENOMEM; - if (!try_module_get(driver->other->owner)) { - /* This cannot in fact currently happen */ - goto err_free_tty; - } - initialize_tty_struct(o_tty, driver->other, idx); - - tty->termios = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL); - if (tty->termios == NULL) - goto err_free_mem; - *tty->termios = driver->init_termios; - tty->termios_locked = tty->termios + 1; - - o_tty->termios = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL); - if (o_tty->termios == NULL) - goto err_free_mem; - *o_tty->termios = driver->other->init_termios; - o_tty->termios_locked = o_tty->termios + 1; - - tty_driver_kref_get(driver->other); - if (driver->subtype == PTY_TYPE_MASTER) - o_tty->count++; - /* Establish the links in both directions */ - tty->link = o_tty; - o_tty->link = tty; - /* - * All structures have been allocated, so now we install them. - * Failures after this point use release_tty to clean up, so - * there's no need to null out the local pointers. - */ - tty_driver_kref_get(driver); - tty->count++; - return 0; -err_free_mem: - deinitialize_tty_struct(o_tty); - kfree(o_tty->termios); - kfree(tty->termios); - module_put(o_tty->driver->owner); -err_free_tty: - free_tty_struct(o_tty); - return -ENOMEM; -} - -static void ptm_unix98_remove(struct tty_driver *driver, struct tty_struct *tty) -{ + return pty_common_install(driver, tty, false); } -static void pts_unix98_remove(struct tty_driver *driver, struct tty_struct *tty) +static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty) { } static const struct tty_operations ptm_unix98_ops = { .lookup = ptm_unix98_lookup, .install = pty_unix98_install, - .remove = ptm_unix98_remove, + .remove = pty_unix98_remove, .open = pty_open, .close = pty_close, .write = pty_write, @@ -578,14 +580,14 @@ static const struct tty_operations ptm_unix98_ops = { .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, .ioctl = pty_unix98_ioctl, - .shutdown = pty_unix98_shutdown, - .resize = pty_resize + .resize = pty_resize, + .cleanup = pty_cleanup }; static const struct tty_operations pty_unix98_ops = { .lookup = pts_unix98_lookup, .install = pty_unix98_install, - .remove = pts_unix98_remove, + .remove = pty_unix98_remove, .open = pty_open, .close = pty_close, .write = pty_write, @@ -594,7 +596,7 @@ static const struct tty_operations pty_unix98_ops = { .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, - .shutdown = pty_unix98_shutdown + .cleanup = pty_cleanup, }; /** @@ -622,26 +624,27 @@ static int ptmx_open(struct inode *inode, struct file *filp) return retval; /* find a device that is not in use. */ - tty_lock(); + mutex_lock(&devpts_mutex); index = devpts_new_index(inode); - tty_unlock(); if (index < 0) { retval = index; goto err_file; } + mutex_unlock(&devpts_mutex); + mutex_lock(&tty_mutex); - mutex_lock(&devpts_mutex); tty = tty_init_dev(ptm_driver, index); - mutex_unlock(&devpts_mutex); - tty_lock(); - mutex_unlock(&tty_mutex); if (IS_ERR(tty)) { retval = PTR_ERR(tty); goto out; } + /* The tty returned here is locked so we can safely + drop the mutex */ + mutex_unlock(&tty_mutex); + set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */ tty_add_file(tty, filp); @@ -654,16 +657,17 @@ static int ptmx_open(struct inode *inode, struct file *filp) if (retval) goto err_release; - tty_unlock(); + tty_unlock(tty); return 0; err_release: - tty_unlock(); + tty_unlock(tty); tty_release(inode, filp); return retval; out: + mutex_unlock(&tty_mutex); devpts_kill_index(inode, index); - tty_unlock(); err_file: + mutex_unlock(&devpts_mutex); tty_free_file(filp); return retval; } @@ -672,11 +676,21 @@ static struct file_operations ptmx_fops; static void __init unix98_pty_init(void) { - ptm_driver = alloc_tty_driver(NR_UNIX98_PTY_MAX); - if (!ptm_driver) + ptm_driver = tty_alloc_driver(NR_UNIX98_PTY_MAX, + TTY_DRIVER_RESET_TERMIOS | + TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_DEV | + TTY_DRIVER_DEVPTS_MEM | + TTY_DRIVER_DYNAMIC_ALLOC); + if (IS_ERR(ptm_driver)) panic("Couldn't allocate Unix98 ptm driver"); - pts_driver = alloc_tty_driver(NR_UNIX98_PTY_MAX); - if (!pts_driver) + pts_driver = tty_alloc_driver(NR_UNIX98_PTY_MAX, + TTY_DRIVER_RESET_TERMIOS | + TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_DEV | + TTY_DRIVER_DEVPTS_MEM | + TTY_DRIVER_DYNAMIC_ALLOC); + if (IS_ERR(pts_driver)) panic("Couldn't allocate Unix98 pts driver"); ptm_driver->driver_name = "pty_master"; @@ -692,8 +706,6 @@ static void __init unix98_pty_init(void) ptm_driver->init_termios.c_lflag = 0; ptm_driver->init_termios.c_ispeed = 38400; ptm_driver->init_termios.c_ospeed = 38400; - ptm_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW | - TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM; ptm_driver->other = pts_driver; tty_set_operations(ptm_driver, &ptm_unix98_ops); @@ -707,8 +719,6 @@ static void __init unix98_pty_init(void) pts_driver->init_termios.c_cflag = B38400 | CS8 | CREAD; pts_driver->init_termios.c_ispeed = 38400; pts_driver->init_termios.c_ospeed = 38400; - pts_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW | - TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM; pts_driver->other = ptm_driver; tty_set_operations(pts_driver, &pty_unix98_ops); diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index 777d5f9cf6cc..9700d34b20a3 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -704,8 +704,8 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev) spin_lock_init(&info->slock); mutex_init(&info->write_mtx); rp_table[line] = info; - tty_register_device(rocket_driver, line, pci_dev ? &pci_dev->dev : - NULL); + tty_port_register_device(&info->port, rocket_driver, line, + pci_dev ? &pci_dev->dev : NULL); } /* @@ -720,7 +720,7 @@ static void configure_r_port(struct tty_struct *tty, struct r_port *info, unsigned rocketMode; int bits, baud, divisor; CHANNEL_t *cp; - struct ktermios *t = tty->termios; + struct ktermios *t = &tty->termios; cp = &info->channel; cflag = t->c_cflag; @@ -978,7 +978,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp) tty->alt_speed = 460800; configure_r_port(tty, info, NULL); - if (tty->termios->c_cflag & CBAUD) { + if (tty->termios.c_cflag & CBAUD) { sSetDTR(cp); sSetRTS(cp); } @@ -1089,35 +1089,35 @@ static void rp_set_termios(struct tty_struct *tty, if (rocket_paranoia_check(info, "rp_set_termios")) return; - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; /* * This driver doesn't support CS5 or CS6 */ if (((cflag & CSIZE) == CS5) || ((cflag & CSIZE) == CS6)) - tty->termios->c_cflag = + tty->termios.c_cflag = ((cflag & ~CSIZE) | (old_termios->c_cflag & CSIZE)); /* Or CMSPAR */ - tty->termios->c_cflag &= ~CMSPAR; + tty->termios.c_cflag &= ~CMSPAR; configure_r_port(tty, info, old_termios); cp = &info->channel; /* Handle transition to B0 status */ - if ((old_termios->c_cflag & CBAUD) && !(tty->termios->c_cflag & CBAUD)) { + if ((old_termios->c_cflag & CBAUD) && !(tty->termios.c_cflag & CBAUD)) { sClrDTR(cp); sClrRTS(cp); } /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && (tty->termios->c_cflag & CBAUD)) { - if (!tty->hw_stopped || !(tty->termios->c_cflag & CRTSCTS)) + if (!(old_termios->c_cflag & CBAUD) && (tty->termios.c_cflag & CBAUD)) { + if (!tty->hw_stopped || !(tty->termios.c_cflag & CRTSCTS)) sSetRTS(cp); sSetDTR(cp); } - if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) { + if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios.c_cflag & CRTSCTS)) { tty->hw_stopped = 0; rp_start(tty); } diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c index 3ed20e435e59..66c38a3f74ce 100644 --- a/drivers/tty/serial/68328serial.c +++ b/drivers/tty/serial/68328serial.c @@ -515,7 +515,7 @@ static void change_speed(struct m68k_serial *info, struct tty_struct *tty) unsigned cflag; int i; - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; if (!(port = info->port)) return; @@ -617,7 +617,7 @@ static void rs_set_ldisc(struct tty_struct *tty) if (serial_paranoia_check(info, tty->name, "rs_set_ldisc")) return; - info->is_cons = (tty->termios->c_line == N_TTY); + info->is_cons = (tty->termios.c_line == N_TTY); printk("ttyS%d console mode %s\n", info->line, info->is_cons ? "on" : "off"); } @@ -985,7 +985,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) change_speed(info, tty); if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { + !(tty->termios.c_cflag & CRTSCTS)) { tty->hw_stopped = 0; rs_start(tty); } @@ -1070,7 +1070,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) if (tty->ldisc.close) (tty->ldisc.close)(tty); tty->ldisc = ldiscs[N_TTY]; - tty->termios->c_line = N_TTY; + tty->termios.c_line = N_TTY; if (tty->ldisc.open) (tty->ldisc.open)(tty); } @@ -1189,12 +1189,6 @@ rs68328_init(void) serial_driver->flags = TTY_DRIVER_REAL_RAW; tty_set_operations(serial_driver, &rs_ops); - if (tty_register_driver(serial_driver)) { - put_tty_driver(serial_driver); - printk(KERN_ERR "Couldn't register serial driver\n"); - return -ENOMEM; - } - local_irq_save(flags); for(i=0;i<NR_PORTS;i++) { @@ -1224,8 +1218,17 @@ rs68328_init(void) 0, "M68328_UART", info)) panic("Unable to attach 68328 serial interrupt\n"); + + tty_port_link_device(&info->tport, serial_driver, i); } local_irq_restore(flags); + + if (tty_register_driver(serial_driver)) { + put_tty_driver(serial_driver); + printk(KERN_ERR "Couldn't register serial driver\n"); + return -ENOMEM; + } + return 0; } diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 8123f784bcda..d4e0b07cb130 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -2202,6 +2202,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, unsigned char cval, fcr = 0; unsigned long flags; unsigned int baud, quot; + int fifo_bug = 0; switch (termios->c_cflag & CSIZE) { case CS5: @@ -2221,8 +2222,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, if (termios->c_cflag & CSTOPB) cval |= UART_LCR_STOP; - if (termios->c_cflag & PARENB) + if (termios->c_cflag & PARENB) { cval |= UART_LCR_PARITY; + if (up->bugs & UART_BUG_PARITY) + fifo_bug = 1; + } if (!(termios->c_cflag & PARODD)) cval |= UART_LCR_EPAR; #ifdef CMSPAR @@ -2246,7 +2250,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) { fcr = uart_config[port->type].fcr; - if (baud < 2400) { + if (baud < 2400 || fifo_bug) { fcr &= ~UART_FCR_TRIGGER_MASK; fcr |= UART_FCR_TRIGGER_1; } @@ -2336,7 +2340,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, serial_port_out(port, UART_EFR, efr); } -#ifdef CONFIG_ARCH_OMAP +#ifdef CONFIG_ARCH_OMAP1 /* Workaround to enable 115200 baud on OMAP1510 internal ports */ if (cpu_is_omap1510() && is_omap_port(up)) { if (baud == 115200) { @@ -2426,7 +2430,7 @@ static unsigned int serial8250_port_size(struct uart_8250_port *pt) { if (pt->port.iotype == UPIO_AU) return 0x1000; -#ifdef CONFIG_ARCH_OMAP +#ifdef CONFIG_ARCH_OMAP1 if (is_omap_port(pt)) return 0x16 << pt->port.regshift; #endif @@ -2979,36 +2983,36 @@ void serial8250_resume_port(int line) static int __devinit serial8250_probe(struct platform_device *dev) { struct plat_serial8250_port *p = dev->dev.platform_data; - struct uart_port port; + struct uart_8250_port uart; int ret, i, irqflag = 0; - memset(&port, 0, sizeof(struct uart_port)); + memset(&uart, 0, sizeof(uart)); if (share_irqs) irqflag = IRQF_SHARED; for (i = 0; p && p->flags != 0; p++, i++) { - port.iobase = p->iobase; - port.membase = p->membase; - port.irq = p->irq; - port.irqflags = p->irqflags; - port.uartclk = p->uartclk; - port.regshift = p->regshift; - port.iotype = p->iotype; - port.flags = p->flags; - port.mapbase = p->mapbase; - port.hub6 = p->hub6; - port.private_data = p->private_data; - port.type = p->type; - port.serial_in = p->serial_in; - port.serial_out = p->serial_out; - port.handle_irq = p->handle_irq; - port.handle_break = p->handle_break; - port.set_termios = p->set_termios; - port.pm = p->pm; - port.dev = &dev->dev; - port.irqflags |= irqflag; - ret = serial8250_register_port(&port); + uart.port.iobase = p->iobase; + uart.port.membase = p->membase; + uart.port.irq = p->irq; + uart.port.irqflags = p->irqflags; + uart.port.uartclk = p->uartclk; + uart.port.regshift = p->regshift; + uart.port.iotype = p->iotype; + uart.port.flags = p->flags; + uart.port.mapbase = p->mapbase; + uart.port.hub6 = p->hub6; + uart.port.private_data = p->private_data; + uart.port.type = p->type; + uart.port.serial_in = p->serial_in; + uart.port.serial_out = p->serial_out; + uart.port.handle_irq = p->handle_irq; + uart.port.handle_break = p->handle_break; + uart.port.set_termios = p->set_termios; + uart.port.pm = p->pm; + uart.port.dev = &dev->dev; + uart.port.irqflags |= irqflag; + ret = serial8250_register_8250_port(&uart); if (ret < 0) { dev_err(&dev->dev, "unable to register port at index %d " "(IO%lx MEM%llx IRQ%d): %d\n", i, @@ -3081,7 +3085,7 @@ static struct platform_driver serial8250_isa_driver = { static struct platform_device *serial8250_isa_devs; /* - * serial8250_register_port and serial8250_unregister_port allows for + * serial8250_register_8250_port and serial8250_unregister_port allows for * 16x50 serial ports to be configured at run-time, to support PCMCIA * modems and PCI multiport cards. */ @@ -3155,6 +3159,7 @@ int serial8250_register_8250_port(struct uart_8250_port *up) uart->port.regshift = up->port.regshift; uart->port.iotype = up->port.iotype; uart->port.flags = up->port.flags | UPF_BOOT_AUTOCONF; + uart->bugs = up->bugs; uart->port.mapbase = up->port.mapbase; uart->port.private_data = up->port.private_data; if (up->port.dev) @@ -3198,29 +3203,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up) EXPORT_SYMBOL(serial8250_register_8250_port); /** - * serial8250_register_port - register a serial port - * @port: serial port template - * - * Configure the serial port specified by the request. If the - * port exists and is in use, it is hung up and unregistered - * first. - * - * The port is then probed and if necessary the IRQ is autodetected - * If this fails an error is returned. - * - * On success the port is ready to use and the line number is returned. - */ -int serial8250_register_port(struct uart_port *port) -{ - struct uart_8250_port up; - - memset(&up, 0, sizeof(up)); - memcpy(&up.port, port, sizeof(*port)); - return serial8250_register_8250_port(&up); -} -EXPORT_SYMBOL(serial8250_register_port); - -/** * serial8250_unregister_port - remove a 16x50 serial port at runtime * @line: serial line number * diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index f9719d167c8d..0c5e908df0b5 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -13,36 +13,6 @@ #include <linux/serial_8250.h> -struct uart_8250_port { - struct uart_port port; - struct timer_list timer; /* "no irq" timer */ - struct list_head list; /* ports on this IRQ */ - unsigned short capabilities; /* port capabilities */ - unsigned short bugs; /* port bugs */ - unsigned int tx_loadsz; /* transmit fifo load size */ - unsigned char acr; - unsigned char ier; - unsigned char lcr; - unsigned char mcr; - unsigned char mcr_mask; /* mask of user bits */ - unsigned char mcr_force; /* mask of forced bits */ - unsigned char cur_iotype; /* Running I/O type */ - - /* - * Some bits in registers are cleared on a read, so they must - * be saved whenever the register is read but the bits will not - * be immediately processed. - */ -#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS - unsigned char lsr_saved_flags; -#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA - unsigned char msr_saved_flags; - - /* 8250 specific callbacks */ - int (*dl_read)(struct uart_8250_port *); - void (*dl_write)(struct uart_8250_port *, int); -}; - struct old_serial_port { unsigned int uart; unsigned int baud_base; @@ -56,9 +26,6 @@ struct old_serial_port { unsigned long irqflags; }; -/* - * This replaces serial_uart_config in include/linux/serial.h - */ struct serial8250_config { const char *name; unsigned short fifo_size; @@ -78,6 +45,7 @@ struct serial8250_config { #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ #define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */ #define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */ +#define UART_BUG_PARITY (1 << 4) /* UART mishandles parity if FIFO enabled */ #define PROBE_RSA (1 << 0) #define PROBE_ANY (~0) diff --git a/drivers/tty/serial/8250/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c index b0ce8c56f1a4..857498312a9a 100644 --- a/drivers/tty/serial/8250/8250_acorn.c +++ b/drivers/tty/serial/8250/8250_acorn.c @@ -43,7 +43,7 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id) { struct serial_card_info *info; struct serial_card_type *type = id->data; - struct uart_port port; + struct uart_8250_port uart; unsigned long bus_addr; unsigned int i; @@ -62,19 +62,19 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id) ecard_set_drvdata(ec, info); - memset(&port, 0, sizeof(struct uart_port)); - port.irq = ec->irq; - port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; - port.uartclk = type->uartclk; - port.iotype = UPIO_MEM; - port.regshift = 2; - port.dev = &ec->dev; + memset(&uart, 0, sizeof(struct uart_8250_port)); + uart.port.irq = ec->irq; + uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + uart.port.uartclk = type->uartclk; + uart.port.iotype = UPIO_MEM; + uart.port.regshift = 2; + uart.port.dev = &ec->dev; for (i = 0; i < info->num_ports; i ++) { - port.membase = info->vaddr + type->offset[i]; - port.mapbase = bus_addr + type->offset[i]; + uart.port.membase = info->vaddr + type->offset[i]; + uart.port.mapbase = bus_addr + type->offset[i]; - info->ports[i] = serial8250_register_port(&port); + info->ports[i] = serial8250_register_8250_port(&uart); } return 0; diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index f574eef3075f..c3b2ec0c8c0b 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -89,7 +89,7 @@ static int dw8250_handle_irq(struct uart_port *p) static int __devinit dw8250_probe(struct platform_device *pdev) { - struct uart_port port = {}; + struct uart_8250_port uart = {}; struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); struct device_node *np = pdev->dev.of_node; @@ -104,28 +104,28 @@ static int __devinit dw8250_probe(struct platform_device *pdev) data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; - port.private_data = data; - - spin_lock_init(&port.lock); - port.mapbase = regs->start; - port.irq = irq->start; - port.handle_irq = dw8250_handle_irq; - port.type = PORT_8250; - port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP | + uart.port.private_data = data; + + spin_lock_init(&uart.port.lock); + uart.port.mapbase = regs->start; + uart.port.irq = irq->start; + uart.port.handle_irq = dw8250_handle_irq; + uart.port.type = PORT_8250; + uart.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_FIXED_PORT | UPF_FIXED_TYPE; - port.dev = &pdev->dev; + uart.port.dev = &pdev->dev; - port.iotype = UPIO_MEM; - port.serial_in = dw8250_serial_in; - port.serial_out = dw8250_serial_out; + uart.port.iotype = UPIO_MEM; + uart.port.serial_in = dw8250_serial_in; + uart.port.serial_out = dw8250_serial_out; if (!of_property_read_u32(np, "reg-io-width", &val)) { switch (val) { case 1: break; case 4: - port.iotype = UPIO_MEM32; - port.serial_in = dw8250_serial_in32; - port.serial_out = dw8250_serial_out32; + uart.port.iotype = UPIO_MEM32; + uart.port.serial_in = dw8250_serial_in32; + uart.port.serial_out = dw8250_serial_out32; break; default: dev_err(&pdev->dev, "unsupported reg-io-width (%u)\n", @@ -135,15 +135,15 @@ static int __devinit dw8250_probe(struct platform_device *pdev) } if (!of_property_read_u32(np, "reg-shift", &val)) - port.regshift = val; + uart.port.regshift = val; if (of_property_read_u32(np, "clock-frequency", &val)) { dev_err(&pdev->dev, "no clock-frequency property set\n"); return -EINVAL; } - port.uartclk = val; + uart.port.uartclk = val; - data->line = serial8250_register_port(&port); + data->line = serial8250_register_8250_port(&uart); if (data->line < 0) return data->line; diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c index d8c0ffbfa6e3..097dff9c08ad 100644 --- a/drivers/tty/serial/8250/8250_gsc.c +++ b/drivers/tty/serial/8250/8250_gsc.c @@ -26,7 +26,7 @@ static int __init serial_init_chip(struct parisc_device *dev) { - struct uart_port port; + struct uart_8250_port uart; unsigned long address; int err; @@ -48,21 +48,21 @@ static int __init serial_init_chip(struct parisc_device *dev) if (dev->id.sversion != 0x8d) address += 0x800; - memset(&port, 0, sizeof(port)); - port.iotype = UPIO_MEM; + memset(&uart, 0, sizeof(uart)); + uart.port.iotype = UPIO_MEM; /* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */ - port.uartclk = 7272727; - port.mapbase = address; - port.membase = ioremap_nocache(address, 16); - port.irq = dev->irq; - port.flags = UPF_BOOT_AUTOCONF; - port.dev = &dev->dev; - - err = serial8250_register_port(&port); + uart.port.uartclk = 7272727; + uart.port.mapbase = address; + uart.port.membase = ioremap_nocache(address, 16); + uart.port.irq = dev->irq; + uart.port.flags = UPF_BOOT_AUTOCONF; + uart.port.dev = &dev->dev; + + err = serial8250_register_8250_port(&uart); if (err < 0) { printk(KERN_WARNING - "serial8250_register_port returned error %d\n", err); - iounmap(port.membase); + "serial8250_register_8250_port returned error %d\n", err); + iounmap(uart.port.membase); return err; } diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c index c13438c93012..8f1dd2cc00a8 100644 --- a/drivers/tty/serial/8250/8250_hp300.c +++ b/drivers/tty/serial/8250/8250_hp300.c @@ -171,7 +171,7 @@ static int __devinit hpdca_init_one(struct dio_dev *d, return 0; } #endif - memset(&port, 0, sizeof(struct uart_port)); + memset(&uart, 0, sizeof(uart)); /* Memory mapped I/O */ port.iotype = UPIO_MEM; @@ -182,7 +182,7 @@ static int __devinit hpdca_init_one(struct dio_dev *d, port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); port.regshift = 1; port.dev = &d->dev; - line = serial8250_register_port(&port); + line = serial8250_register_8250_port(&uart); if (line < 0) { printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d" @@ -210,7 +210,7 @@ static int __init hp300_8250_init(void) #ifdef CONFIG_HPAPCI int line; unsigned long base; - struct uart_port uport; + struct uart_8250_port uart; struct hp300_port *port; int i; #endif @@ -248,26 +248,26 @@ static int __init hp300_8250_init(void) if (!port) return -ENOMEM; - memset(&uport, 0, sizeof(struct uart_port)); + memset(&uart, 0, sizeof(uart)); base = (FRODO_BASE + FRODO_APCI_OFFSET(i)); /* Memory mapped I/O */ - uport.iotype = UPIO_MEM; - uport.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \ + uart.port.iotype = UPIO_MEM; + uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \ | UPF_BOOT_AUTOCONF; /* XXX - no interrupt support yet */ - uport.irq = 0; - uport.uartclk = HPAPCI_BAUD_BASE * 16; - uport.mapbase = base; - uport.membase = (char *)(base + DIO_VIRADDRBASE); - uport.regshift = 2; + uart.port.irq = 0; + uart.port.uartclk = HPAPCI_BAUD_BASE * 16; + uart.port.mapbase = base; + uart.port.membase = (char *)(base + DIO_VIRADDRBASE); + uart.port.regshift = 2; - line = serial8250_register_port(&uport); + line = serial8250_register_8250_port(&uart); if (line < 0) { printk(KERN_NOTICE "8250_hp300: register_serial() APCI" - " %d irq %d failed\n", i, uport.irq); + " %d irq %d failed\n", i, uart.port.irq); kfree(port); continue; } diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 28e7c7cce893..fdab80a4e063 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -44,7 +44,7 @@ struct pci_serial_quirk { int (*init)(struct pci_dev *dev); int (*setup)(struct serial_private *, const struct pciserial_board *, - struct uart_port *, int); + struct uart_8250_port *, int); void (*exit)(struct pci_dev *dev); }; @@ -59,7 +59,7 @@ struct serial_private { }; static int pci_default_setup(struct serial_private*, - const struct pciserial_board*, struct uart_port*, int); + const struct pciserial_board*, struct uart_8250_port *, int); static void moan_device(const char *str, struct pci_dev *dev) { @@ -74,7 +74,7 @@ static void moan_device(const char *str, struct pci_dev *dev) } static int -setup_port(struct serial_private *priv, struct uart_port *port, +setup_port(struct serial_private *priv, struct uart_8250_port *port, int bar, int offset, int regshift) { struct pci_dev *dev = priv->dev; @@ -93,17 +93,17 @@ setup_port(struct serial_private *priv, struct uart_port *port, if (!priv->remapped_bar[bar]) return -ENOMEM; - port->iotype = UPIO_MEM; - port->iobase = 0; - port->mapbase = base + offset; - port->membase = priv->remapped_bar[bar] + offset; - port->regshift = regshift; + port->port.iotype = UPIO_MEM; + port->port.iobase = 0; + port->port.mapbase = base + offset; + port->port.membase = priv->remapped_bar[bar] + offset; + port->port.regshift = regshift; } else { - port->iotype = UPIO_PORT; - port->iobase = base + offset; - port->mapbase = 0; - port->membase = NULL; - port->regshift = 0; + port->port.iotype = UPIO_PORT; + port->port.iobase = base + offset; + port->port.mapbase = 0; + port->port.membase = NULL; + port->port.regshift = 0; } return 0; } @@ -113,7 +113,7 @@ setup_port(struct serial_private *priv, struct uart_port *port, */ static int addidata_apci7800_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) + struct uart_8250_port *port, int idx) { unsigned int bar = 0, offset = board->first_offset; bar = FL_GET_BASE(board->flags); @@ -140,7 +140,7 @@ static int addidata_apci7800_setup(struct serial_private *priv, */ static int afavlab_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) + struct uart_8250_port *port, int idx) { unsigned int bar, offset = board->first_offset; @@ -195,7 +195,7 @@ static int pci_hp_diva_init(struct pci_dev *dev) static int pci_hp_diva_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) + struct uart_8250_port *port, int idx) { unsigned int offset = board->first_offset; unsigned int bar = FL_GET_BASE(board->flags); @@ -370,7 +370,7 @@ static void __devexit pci_ni8430_exit(struct pci_dev *dev) /* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ static int sbs_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) + struct uart_8250_port *port, int idx) { unsigned int bar, offset = board->first_offset; @@ -525,7 +525,7 @@ static int pci_siig_init(struct pci_dev *dev) static int pci_siig_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) + struct uart_8250_port *port, int idx) { unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0; @@ -619,7 +619,7 @@ static int pci_timedia_init(struct pci_dev *dev) static int pci_timedia_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) + struct uart_8250_port *port, int idx) { unsigned int bar = 0, offset = board->first_offset; @@ -653,7 +653,7 @@ pci_timedia_setup(struct serial_private *priv, static int titan_400l_800l_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) + struct uart_8250_port *port, int idx) { unsigned int bar, offset = board->first_offset; @@ -754,7 +754,7 @@ static int pci_ni8430_init(struct pci_dev *dev) static int pci_ni8430_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) + struct uart_8250_port *port, int idx) { void __iomem *p; unsigned long base, len; @@ -781,7 +781,7 @@ pci_ni8430_setup(struct serial_private *priv, static int pci_netmos_9900_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) + struct uart_8250_port *port, int idx) { unsigned int bar; @@ -1032,10 +1032,17 @@ static int pci_oxsemi_tornado_init(struct pci_dev *dev) return number_uarts; } -static int -pci_default_setup(struct serial_private *priv, +static int pci_asix_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) + struct uart_8250_port *port, int idx) +{ + port->bugs |= UART_BUG_PARITY; + return pci_default_setup(priv, board, port, idx); +} + +static int pci_default_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) { unsigned int bar, offset = board->first_offset, maxnr; @@ -1057,15 +1064,15 @@ pci_default_setup(struct serial_private *priv, static int ce4100_serial_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) + struct uart_8250_port *port, int idx) { int ret; ret = setup_port(priv, port, 0, 0, board->reg_shift); - port->iotype = UPIO_MEM32; - port->type = PORT_XSCALE; - port->flags = (port->flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); - port->regshift = 2; + port->port.iotype = UPIO_MEM32; + port->port.type = PORT_XSCALE; + port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); + port->port.regshift = 2; return ret; } @@ -1073,16 +1080,16 @@ ce4100_serial_setup(struct serial_private *priv, static int pci_omegapci_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) + struct uart_8250_port *port, int idx) { return setup_port(priv, port, 2, idx * 8, 0); } static int skip_tx_en_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) + struct uart_8250_port *port, int idx) { - port->flags |= UPF_NO_TXEN_TEST; + port->port.flags |= UPF_NO_TXEN_TEST; printk(KERN_DEBUG "serial8250: skipping TxEn test for device " "[%04x:%04x] subsystem [%04x:%04x]\n", priv->dev->vendor, @@ -1131,11 +1138,11 @@ static unsigned int kt_serial_in(struct uart_port *p, int offset) static int kt_serial_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) + struct uart_8250_port *port, int idx) { - port->flags |= UPF_BUG_THRE; - port->serial_in = kt_serial_in; - port->handle_break = kt_handle_break; + port->port.flags |= UPF_BUG_THRE; + port->port.serial_in = kt_serial_in; + port->port.handle_break = kt_handle_break; return skip_tx_en_setup(priv, board, port, idx); } @@ -1151,9 +1158,19 @@ static int pci_eg20t_init(struct pci_dev *dev) static int pci_xr17c154_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) + struct uart_8250_port *port, int idx) +{ + port->port.flags |= UPF_EXAR_EFR; + return pci_default_setup(priv, board, port, idx); +} + +static int +pci_wch_ch353_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) { - port->flags |= UPF_EXAR_EFR; + port->port.flags |= UPF_FIXED_TYPE; + port->port.type = PORT_16550A; return pci_default_setup(priv, board, port, idx); } @@ -1187,6 +1204,13 @@ pci_xr17c154_setup(struct serial_private *priv, #define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6 #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 #define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d +#define PCI_VENDOR_ID_WCH 0x4348 +#define PCI_DEVICE_ID_WCH_CH353_4S 0x3453 +#define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046 +#define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053 +#define PCI_VENDOR_ID_AGESTAR 0x5372 +#define PCI_DEVICE_ID_AGESTAR_9375 0x6872 +#define PCI_VENDOR_ID_ASIX 0x9710 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 @@ -1726,7 +1750,41 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .setup = pci_omegapci_setup, - }, + }, + /* WCH CH353 2S1P card (16550 clone) */ + { + .vendor = PCI_VENDOR_ID_WCH, + .device = PCI_DEVICE_ID_WCH_CH353_2S1P, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch353_setup, + }, + /* WCH CH353 4S card (16550 clone) */ + { + .vendor = PCI_VENDOR_ID_WCH, + .device = PCI_DEVICE_ID_WCH_CH353_4S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch353_setup, + }, + /* WCH CH353 2S1PF card (16550 clone) */ + { + .vendor = PCI_VENDOR_ID_WCH, + .device = PCI_DEVICE_ID_WCH_CH353_2S1PF, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch353_setup, + }, + /* + * ASIX devices with FIFO bug + */ + { + .vendor = PCI_VENDOR_ID_ASIX, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_asix_setup, + }, /* * Default "match everything" terminator entry */ @@ -1887,7 +1945,6 @@ enum pci_board_num_t { pbn_panacom, pbn_panacom2, pbn_panacom4, - pbn_exsys_4055, pbn_plx_romulus, pbn_oxsemi, pbn_oxsemi_1_4000000, @@ -2393,13 +2450,6 @@ static struct pciserial_board pci_boards[] __devinitdata = { .reg_shift = 7, }, - [pbn_exsys_4055] = { - .flags = FL_BASE2, - .num_ports = 4, - .base_baud = 115200, - .uart_offset = 8, - }, - /* I think this entry is broken - the first_offset looks wrong --rmk */ [pbn_plx_romulus] = { .flags = FL_BASE2, @@ -2624,10 +2674,14 @@ static struct pciserial_board pci_boards[] __devinitdata = { }, }; -static const struct pci_device_id softmodem_blacklist[] = { +static const struct pci_device_id blacklist[] = { + /* softmodems */ { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */ { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */ { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */ + + /* multi-io cards handled by parport_serial */ + { PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */ }; /* @@ -2638,7 +2692,7 @@ static const struct pci_device_id softmodem_blacklist[] = { static int __devinit serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) { - const struct pci_device_id *blacklist; + const struct pci_device_id *bldev; int num_iomem, num_port, first_port = -1, i; /* @@ -2655,13 +2709,13 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) /* * Do not access blacklisted devices that are known not to - * feature serial ports. + * feature serial ports or are handled by other modules. */ - for (blacklist = softmodem_blacklist; - blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist); - blacklist++) { - if (dev->vendor == blacklist->vendor && - dev->device == blacklist->device) + for (bldev = blacklist; + bldev < blacklist + ARRAY_SIZE(blacklist); + bldev++) { + if (dev->vendor == bldev->vendor && + dev->device == bldev->device) return -ENODEV; } @@ -2728,7 +2782,7 @@ serial_pci_matches(const struct pciserial_board *board, struct serial_private * pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) { - struct uart_port serial_port; + struct uart_8250_port uart; struct serial_private *priv; struct pci_serial_quirk *quirk; int rc, nr_ports, i; @@ -2768,22 +2822,22 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) priv->dev = dev; priv->quirk = quirk; - memset(&serial_port, 0, sizeof(struct uart_port)); - serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; - serial_port.uartclk = board->base_baud * 16; - serial_port.irq = get_pci_irq(dev, board); - serial_port.dev = &dev->dev; + memset(&uart, 0, sizeof(uart)); + uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + uart.port.uartclk = board->base_baud * 16; + uart.port.irq = get_pci_irq(dev, board); + uart.port.dev = &dev->dev; for (i = 0; i < nr_ports; i++) { - if (quirk->setup(priv, board, &serial_port, i)) + if (quirk->setup(priv, board, &uart, i)) break; #ifdef SERIAL_DEBUG_PCI printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n", - serial_port.iobase, serial_port.irq, serial_port.iotype); + uart.port.iobase, uart.port.irq, uart.port.iotype); #endif - priv->line[i] = serial8250_register_port(&serial_port); + priv->line[i] = serial8250_register_8250_port(&uart); if (priv->line[i] < 0) { printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]); break; @@ -3193,7 +3247,7 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0, - pbn_exsys_4055 }, + pbn_b2_4_115200 }, /* * Megawolf Romulus PCI Serial Card, from Mike Hudson * (Exoray@isys.ca) @@ -4179,6 +4233,25 @@ static struct pci_device_id serial_pci_tbl[] = { pbn_omegapci }, /* + * AgeStar as-prs2-009 + */ + { PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_b0_bt_2_115200 }, + + /* + * WCH CH353 series devices: The 2S1P is handled by parport_serial + * so not listed here. + */ + { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_4S, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_b0_bt_4_115200 }, + + { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_2S1PF, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_b0_bt_2_115200 }, + + /* * These entries match devices with class COMMUNICATION_SERIAL, * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL */ diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c index a2f236510ff1..fde5aa60d51e 100644 --- a/drivers/tty/serial/8250/8250_pnp.c +++ b/drivers/tty/serial/8250/8250_pnp.c @@ -424,7 +424,7 @@ static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags) static int __devinit serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) { - struct uart_port port; + struct uart_8250_port uart; int ret, line, flags = dev_id->driver_data; if (flags & UNKNOWN_DEV) { @@ -433,32 +433,32 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) return ret; } - memset(&port, 0, sizeof(struct uart_port)); + memset(&uart, 0, sizeof(uart)); if (pnp_irq_valid(dev, 0)) - port.irq = pnp_irq(dev, 0); + uart.port.irq = pnp_irq(dev, 0); if (pnp_port_valid(dev, 0)) { - port.iobase = pnp_port_start(dev, 0); - port.iotype = UPIO_PORT; + uart.port.iobase = pnp_port_start(dev, 0); + uart.port.iotype = UPIO_PORT; } else if (pnp_mem_valid(dev, 0)) { - port.mapbase = pnp_mem_start(dev, 0); - port.iotype = UPIO_MEM; - port.flags = UPF_IOREMAP; + uart.port.mapbase = pnp_mem_start(dev, 0); + uart.port.iotype = UPIO_MEM; + uart.port.flags = UPF_IOREMAP; } else return -ENODEV; #ifdef SERIAL_DEBUG_PNP printk(KERN_DEBUG "Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n", - port.iobase, port.mapbase, port.irq, port.iotype); + uart.port.iobase, uart.port.mapbase, uart.port.irq, uart.port.iotype); #endif - port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + uart.port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE) - port.flags |= UPF_SHARE_IRQ; - port.uartclk = 1843200; - port.dev = &dev->dev; + uart.port.flags |= UPF_SHARE_IRQ; + uart.port.uartclk = 1843200; + uart.port.dev = &dev->dev; - line = serial8250_register_port(&port); + line = serial8250_register_8250_port(&uart); if (line < 0) return -ENODEV; diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c index 29b695d041ec..b7d48b346393 100644 --- a/drivers/tty/serial/8250/serial_cs.c +++ b/drivers/tty/serial/8250/serial_cs.c @@ -73,7 +73,7 @@ struct serial_quirk { unsigned int prodid; int multi; /* 1 = multifunction, > 1 = # ports */ void (*config)(struct pcmcia_device *); - void (*setup)(struct pcmcia_device *, struct uart_port *); + void (*setup)(struct pcmcia_device *, struct uart_8250_port *); void (*wakeup)(struct pcmcia_device *); int (*post)(struct pcmcia_device *); }; @@ -105,9 +105,9 @@ struct serial_cfg_mem { * Elan VPU16551 UART with 14.7456MHz oscillator * manfid 0x015D, 0x4C45 */ -static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port) +static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_8250_port *uart) { - port->uartclk = 14745600; + uart->port.uartclk = 14745600; } static int quirk_post_ibm(struct pcmcia_device *link) @@ -343,25 +343,25 @@ static void serial_detach(struct pcmcia_device *link) static int setup_serial(struct pcmcia_device *handle, struct serial_info * info, unsigned int iobase, int irq) { - struct uart_port port; + struct uart_8250_port uart; int line; - memset(&port, 0, sizeof (struct uart_port)); - port.iobase = iobase; - port.irq = irq; - port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; - port.uartclk = 1843200; - port.dev = &handle->dev; + memset(&uart, 0, sizeof(uart)); + uart.port.iobase = iobase; + uart.port.irq = irq; + uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + uart.port.uartclk = 1843200; + uart.port.dev = &handle->dev; if (buggy_uart) - port.flags |= UPF_BUGGY_UART; + uart.port.flags |= UPF_BUGGY_UART; if (info->quirk && info->quirk->setup) - info->quirk->setup(handle, &port); + info->quirk->setup(handle, &uart); - line = serial8250_register_port(&port); + line = serial8250_register_8250_port(&uart); if (line < 0) { - printk(KERN_NOTICE "serial_cs: serial8250_register_port() at " - "0x%04lx, irq %d failed\n", (u_long)iobase, irq); + pr_err("serial_cs: serial8250_register_8250_port() at 0x%04lx, irq %d failed\n", + (unsigned long)iobase, irq); return -EINVAL; } diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 4720b4ba096a..26907cf25744 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -257,12 +257,19 @@ config SERIAL_MAX3100 help MAX3100 chip support -config SERIAL_MAX3107 - tristate "MAX3107 support" +config SERIAL_MAX310X + bool "MAX310X support" depends on SPI select SERIAL_CORE + select REGMAP_SPI if SPI + default n help - MAX3107 chip support + This selects support for an advanced UART from Maxim (Dallas). + Supported ICs are MAX3107, MAX3108. + Each IC contains 128 words each of receive and transmit FIFO + that can be controlled through I2C or high-speed SPI. + + Say Y here if you want to support this ICs. config SERIAL_DZ bool "DECstation DZ serial driver" @@ -704,6 +711,25 @@ config SERIAL_PNX8XXX_CONSOLE If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 and you want to use serial console, say Y. Otherwise, say N. +config SERIAL_HS_LPC32XX + tristate "LPC32XX high speed serial port support" + depends on ARCH_LPC32XX && OF + select SERIAL_CORE + help + Support for the LPC32XX high speed serial ports (up to 900kbps). + Those are UARTs completely different from the Standard UARTs on the + LPC32XX SoC. + Choose M or Y here to build this driver. + +config SERIAL_HS_LPC32XX_CONSOLE + bool "Enable LPC32XX high speed UART serial console" + depends on SERIAL_HS_LPC32XX + select SERIAL_CORE_CONSOLE + help + If you would like to be able to use one of the high speed serial + ports on the LPC32XX as the console, you can do so by answering + Y to this option. + config SERIAL_CORE tristate @@ -1104,6 +1130,24 @@ config SERIAL_SC26XX_CONSOLE help Support for Console on SC2681/SC2692 serial ports. +config SERIAL_SCCNXP + bool "SCCNXP serial port support" + depends on !SERIAL_SC26XX + select SERIAL_CORE + default n + help + This selects support for an advanced UART from NXP (Philips). + Supported ICs are SCC2681, SCC2691, SCC2692, SC28L91, SC28L92, + SC28L202, SCC68681 and SCC68692. + Positioned as a replacement for the driver SC26XX. + +config SERIAL_SCCNXP_CONSOLE + bool "Console on SCCNXP serial port" + depends on SERIAL_SCCNXP + select SERIAL_CORE_CONSOLE + help + Support for console on SCCNXP serial ports. + config SERIAL_BFIN_SPORT tristate "Blackfin SPORT emulate UART" depends on BLACKFIN diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 7257c5d898ae..ce88667cfd17 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -28,12 +28,13 @@ obj-$(CONFIG_SERIAL_BFIN) += bfin_uart.o obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o obj-$(CONFIG_SERIAL_MAX3100) += max3100.o -obj-$(CONFIG_SERIAL_MAX3107) += max3107.o +obj-$(CONFIG_SERIAL_MAX310X) += max310x.o obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o obj-$(CONFIG_SERIAL_MUX) += mux.o obj-$(CONFIG_SERIAL_68328) += 68328serial.o obj-$(CONFIG_SERIAL_MCF) += mcf.o obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o +obj-$(CONFIG_SERIAL_HS_LPC32XX) += lpc32xx_hs.o obj-$(CONFIG_SERIAL_DZ) += dz.o obj-$(CONFIG_SERIAL_ZS) += zs.o obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o @@ -47,6 +48,7 @@ obj-$(CONFIG_SERIAL_MPSC) += mpsc.o obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o obj-$(CONFIG_SERIAL_SC26XX) += sc26xx.o +obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o obj-$(CONFIG_SERIAL_JSM) += jsm/ obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 1f0330915d5a..15d80b9fb303 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -591,7 +591,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) port->ops = &altera_uart_ops; port->flags = UPF_BOOT_AUTOCONF; - dev_set_drvdata(&pdev->dev, port); + platform_set_drvdata(pdev, port); uart_add_one_port(&altera_uart_driver, port); @@ -600,11 +600,11 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) static int __devexit altera_uart_remove(struct platform_device *pdev) { - struct uart_port *port = dev_get_drvdata(&pdev->dev); + struct uart_port *port = platform_get_drvdata(pdev); if (port) { uart_remove_one_port(&altera_uart_driver, port); - dev_set_drvdata(&pdev->dev, NULL); + platform_set_drvdata(pdev, NULL); port->mapbase = 0; } diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c index 0d91a540bf11..22317dd16474 100644 --- a/drivers/tty/serial/amba-pl010.c +++ b/drivers/tty/serial/amba-pl010.c @@ -312,16 +312,12 @@ static int pl010_startup(struct uart_port *port) struct uart_amba_port *uap = (struct uart_amba_port *)port; int retval; - retval = clk_prepare(uap->clk); - if (retval) - goto out; - /* * Try to enable the clock producer. */ - retval = clk_enable(uap->clk); + retval = clk_prepare_enable(uap->clk); if (retval) - goto clk_unprep; + goto out; uap->port.uartclk = clk_get_rate(uap->clk); @@ -346,9 +342,7 @@ static int pl010_startup(struct uart_port *port) return 0; clk_dis: - clk_disable(uap->clk); - clk_unprep: - clk_unprepare(uap->clk); + clk_disable_unprepare(uap->clk); out: return retval; } @@ -375,8 +369,7 @@ static void pl010_shutdown(struct uart_port *port) /* * Shut down the clock producer */ - clk_disable(uap->clk); - clk_unprepare(uap->clk); + clk_disable_unprepare(uap->clk); } static void diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index d3553b5d3fca..cede93876649 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -52,6 +52,8 @@ #include <linux/scatterlist.h> #include <linux/delay.h> #include <linux/types.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/pinctrl/consumer.h> #include <linux/sizes.h> @@ -75,7 +77,6 @@ struct vendor_data { unsigned int lcrh_tx; unsigned int lcrh_rx; bool oversampling; - bool interrupt_may_hang; /* vendor-specific */ bool dma_threshold; bool cts_event_workaround; }; @@ -96,7 +97,6 @@ static struct vendor_data vendor_st = { .lcrh_tx = ST_UART011_LCRH_TX, .lcrh_rx = ST_UART011_LCRH_RX, .oversampling = true, - .interrupt_may_hang = true, .dma_threshold = true, .cts_event_workaround = true, }; @@ -147,7 +147,6 @@ struct uart_amba_port { unsigned int old_cr; /* state during shutdown */ bool autorts; char type[12]; - bool interrupt_may_hang; /* vendor-specific */ #ifdef CONFIG_DMA_ENGINE /* DMA stuff */ bool using_tx_dma; @@ -1215,14 +1214,14 @@ static irqreturn_t pl011_int(int irq, void *dev_id) return IRQ_RETVAL(handled); } -static unsigned int pl01x_tx_empty(struct uart_port *port) +static unsigned int pl011_tx_empty(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int status = readw(uap->port.membase + UART01x_FR); return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; } -static unsigned int pl01x_get_mctrl(struct uart_port *port) +static unsigned int pl011_get_mctrl(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int result = 0; @@ -1285,7 +1284,7 @@ static void pl011_break_ctl(struct uart_port *port, int break_state) } #ifdef CONFIG_CONSOLE_POLL -static int pl010_get_poll_char(struct uart_port *port) +static int pl011_get_poll_char(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int status; @@ -1297,7 +1296,7 @@ static int pl010_get_poll_char(struct uart_port *port) return readw(uap->port.membase + UART01x_DR); } -static void pl010_put_poll_char(struct uart_port *port, +static void pl011_put_poll_char(struct uart_port *port, unsigned char ch) { struct uart_amba_port *uap = (struct uart_amba_port *)port; @@ -1324,16 +1323,12 @@ static int pl011_startup(struct uart_port *port) "could not set default pins\n"); } - retval = clk_prepare(uap->clk); - if (retval) - goto out; - /* * Try to enable the clock producer. */ - retval = clk_enable(uap->clk); + retval = clk_prepare_enable(uap->clk); if (retval) - goto clk_unprep; + goto out; uap->port.uartclk = clk_get_rate(uap->clk); @@ -1411,9 +1406,7 @@ static int pl011_startup(struct uart_port *port) return 0; clk_dis: - clk_disable(uap->clk); - clk_unprep: - clk_unprepare(uap->clk); + clk_disable_unprepare(uap->clk); out: return retval; } @@ -1473,8 +1466,7 @@ static void pl011_shutdown(struct uart_port *port) /* * Shut down the clock producer */ - clk_disable(uap->clk); - clk_unprepare(uap->clk); + clk_disable_unprepare(uap->clk); /* Optionally let pins go into sleep states */ if (!IS_ERR(uap->pins_sleep)) { retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep); @@ -1637,7 +1629,7 @@ static const char *pl011_type(struct uart_port *port) /* * Release the memory region(s) being used by 'port' */ -static void pl010_release_port(struct uart_port *port) +static void pl011_release_port(struct uart_port *port) { release_mem_region(port->mapbase, SZ_4K); } @@ -1645,7 +1637,7 @@ static void pl010_release_port(struct uart_port *port) /* * Request the memory region(s) being used by 'port' */ -static int pl010_request_port(struct uart_port *port) +static int pl011_request_port(struct uart_port *port) { return request_mem_region(port->mapbase, SZ_4K, "uart-pl011") != NULL ? 0 : -EBUSY; @@ -1654,18 +1646,18 @@ static int pl010_request_port(struct uart_port *port) /* * Configure/autoconfigure the port. */ -static void pl010_config_port(struct uart_port *port, int flags) +static void pl011_config_port(struct uart_port *port, int flags) { if (flags & UART_CONFIG_TYPE) { port->type = PORT_AMBA; - pl010_request_port(port); + pl011_request_port(port); } } /* * verify the new serial_struct (for TIOCSSERIAL). */ -static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser) +static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser) { int ret = 0; if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA) @@ -1678,9 +1670,9 @@ static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser) } static struct uart_ops amba_pl011_pops = { - .tx_empty = pl01x_tx_empty, + .tx_empty = pl011_tx_empty, .set_mctrl = pl011_set_mctrl, - .get_mctrl = pl01x_get_mctrl, + .get_mctrl = pl011_get_mctrl, .stop_tx = pl011_stop_tx, .start_tx = pl011_start_tx, .stop_rx = pl011_stop_rx, @@ -1691,13 +1683,13 @@ static struct uart_ops amba_pl011_pops = { .flush_buffer = pl011_dma_flush_buffer, .set_termios = pl011_set_termios, .type = pl011_type, - .release_port = pl010_release_port, - .request_port = pl010_request_port, - .config_port = pl010_config_port, - .verify_port = pl010_verify_port, + .release_port = pl011_release_port, + .request_port = pl011_request_port, + .config_port = pl011_config_port, + .verify_port = pl011_verify_port, #ifdef CONFIG_CONSOLE_POLL - .poll_get_char = pl010_get_poll_char, - .poll_put_char = pl010_put_poll_char, + .poll_get_char = pl011_get_poll_char, + .poll_put_char = pl011_put_poll_char, #endif }; @@ -1869,6 +1861,38 @@ static struct uart_driver amba_reg = { .cons = AMBA_CONSOLE, }; +static int pl011_probe_dt_alias(int index, struct device *dev) +{ + struct device_node *np; + static bool seen_dev_with_alias = false; + static bool seen_dev_without_alias = false; + int ret = index; + + if (!IS_ENABLED(CONFIG_OF)) + return ret; + + np = dev->of_node; + if (!np) + return ret; + + ret = of_alias_get_id(np, "serial"); + if (IS_ERR_VALUE(ret)) { + seen_dev_without_alias = true; + ret = index; + } else { + seen_dev_with_alias = true; + if (ret >= ARRAY_SIZE(amba_ports) || amba_ports[ret] != NULL) { + dev_warn(dev, "requested serial port %d not available.\n", ret); + ret = index; + } + } + + if (seen_dev_with_alias && seen_dev_without_alias) + dev_warn(dev, "aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.\n"); + + return ret; +} + static int pl011_probe(struct amba_device *dev, const struct amba_id *id) { struct uart_amba_port *uap; @@ -1891,6 +1915,8 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) goto out; } + i = pl011_probe_dt_alias(i, &dev->dev); + base = ioremap(dev->res.start, resource_size(&dev->res)); if (!base) { ret = -ENOMEM; @@ -1923,7 +1949,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) uap->lcrh_tx = vendor->lcrh_tx; uap->old_cr = 0; uap->fifosize = vendor->fifosize; - uap->interrupt_may_hang = vendor->interrupt_may_hang; uap->port.dev = &dev->dev; uap->port.mapbase = dev->res.start; uap->port.membase = base; diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c index bd97db23985b..9242d56ba267 100644 --- a/drivers/tty/serial/bfin_uart.c +++ b/drivers/tty/serial/bfin_uart.c @@ -182,7 +182,7 @@ static void bfin_serial_start_tx(struct uart_port *port) * To avoid losting RX interrupt, we reset IR function * before sending data. */ - if (tty->termios->c_line == N_IRDA) + if (tty->termios.c_line == N_IRDA) bfin_serial_reset_irda(port); #ifdef CONFIG_SERIAL_BFIN_DMA diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index 80b6b1b1f725..35ee6a2c6877 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -955,7 +955,7 @@ static const struct control_pins e100_modem_pins[NR_PORTS] = /* Calculate the chartime depending on baudrate, numbor of bits etc. */ static void update_char_time(struct e100_serial * info) { - tcflag_t cflags = info->port.tty->termios->c_cflag; + tcflag_t cflags = info->port.tty->termios.c_cflag; int bits; /* calc. number of bits / data byte */ @@ -1473,7 +1473,7 @@ rs_stop(struct tty_struct *tty) xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty)); xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, stop); - if (tty->termios->c_iflag & IXON ) { + if (tty->termios.c_iflag & IXON ) { xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); } @@ -1496,7 +1496,7 @@ rs_start(struct tty_struct *tty) info->xmit.tail,SERIAL_XMIT_SIZE))); xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(tty)); xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); - if (tty->termios->c_iflag & IXON ) { + if (tty->termios.c_iflag & IXON ) { xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); } @@ -2929,7 +2929,7 @@ shutdown(struct e100_serial * info) descr[i].buf = 0; } - if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) { + if (!info->port.tty || (info->port.tty->termios.c_cflag & HUPCL)) { /* hang up DTR and RTS if HUPCL is enabled */ e100_dtr(info, 0); e100_rts(info, 0); /* could check CRTSCTS before doing this */ @@ -2953,12 +2953,12 @@ change_speed(struct e100_serial *info) unsigned long flags; /* first some safety checks */ - if (!info->port.tty || !info->port.tty->termios) + if (!info->port.tty) return; if (!info->ioport) return; - cflag = info->port.tty->termios->c_cflag; + cflag = info->port.tty->termios.c_cflag; /* possibly, the tx/rx should be disabled first to do this safely */ @@ -3088,7 +3088,7 @@ change_speed(struct e100_serial *info) info->ioport[REG_REC_CTRL] = info->rx_ctrl; xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty)); xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); - if (info->port.tty->termios->c_iflag & IXON ) { + if (info->port.tty->termios.c_iflag & IXON ) { DFLOW(DEBUG_LOG(info->line, "FLOW XOFF enabled 0x%02X\n", STOP_CHAR(info->port.tty))); xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); @@ -3355,7 +3355,7 @@ rs_throttle(struct tty_struct * tty) DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty))); /* Do RTS before XOFF since XOFF might take some time */ - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { /* Turn off RTS line */ e100_rts(info, 0); } @@ -3377,7 +3377,7 @@ rs_unthrottle(struct tty_struct * tty) DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty))); DFLOW(DEBUG_LOG(info->line,"rs_unthrottle flip.count: %i\n", tty->flip.count)); /* Do RTS before XOFF since XOFF might take some time */ - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { /* Assert RTS line */ e100_rts(info, 1); } @@ -3748,7 +3748,7 @@ rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) /* Handle turning off CRTSCTS */ if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { + !(tty->termios.c_cflag & CRTSCTS)) { tty->hw_stopped = 0; rs_start(tty); } @@ -3815,7 +3815,7 @@ rs_close(struct tty_struct *tty, struct file * filp) * separate termios for callout and dialin. */ if (info->flags & ASYNC_NORMAL_ACTIVE) - info->normal_termios = *tty->termios; + info->normal_termios = tty->termios; /* * Now we wait for the transmit buffer to clear; and we notify * the line discipline to only process XON/XOFF characters. @@ -3976,7 +3976,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp, */ if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { - wait_event_interruptible_tty(info->close_wait, + wait_event_interruptible_tty(tty, info->close_wait, !(info->flags & ASYNC_CLOSING)); #ifdef SERIAL_DO_RESTART if (info->flags & ASYNC_HUP_NOTIFY) @@ -3998,7 +3998,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp, return 0; } - if (tty->termios->c_cflag & CLOCAL) { + if (tty->termios.c_cflag & CLOCAL) { do_clocal = 1; } @@ -4052,9 +4052,9 @@ block_til_ready(struct tty_struct *tty, struct file * filp, printk("block_til_ready blocking: ttyS%d, count = %d\n", info->line, info->count); #endif - tty_unlock(); + tty_unlock(tty); schedule(); - tty_lock(); + tty_lock(tty); } set_current_state(TASK_RUNNING); remove_wait_queue(&info->open_wait, &wait); @@ -4115,7 +4115,7 @@ rs_open(struct tty_struct *tty, struct file * filp) */ if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { - wait_event_interruptible_tty(info->close_wait, + wait_event_interruptible_tty(tty, info->close_wait, !(info->flags & ASYNC_CLOSING)); #ifdef SERIAL_DO_RESTART return ((info->flags & ASYNC_HUP_NOTIFY) ? @@ -4219,7 +4219,7 @@ rs_open(struct tty_struct *tty, struct file * filp) } if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) { - *tty->termios = info->normal_termios; + tty->termios = info->normal_termios; change_speed(info); } @@ -4443,14 +4443,12 @@ static int __init rs_init(void) B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */ driver->init_termios.c_ispeed = 115200; driver->init_termios.c_ospeed = 115200; - driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + driver->flags = TTY_DRIVER_REAL_RAW; tty_set_operations(driver, &rs_ops); serial_driver = driver; - if (tty_register_driver(driver)) - panic("Couldn't register serial driver\n"); - /* do some initializing for the separate ports */ + /* do some initializing for the separate ports */ for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) { if (info->enabled) { if (cris_request_io_interface(info->io_if, @@ -4502,7 +4500,12 @@ static int __init rs_init(void) printk(KERN_INFO "%s%d at %p is a builtin UART with DMA\n", serial_driver->name, info->line, info->ioport); } + tty_port_link_device(&info->port, driver, i); } + + if (tty_register_driver(driver)) + panic("Couldn't register serial driver\n"); + #ifdef CONFIG_ETRAX_FAST_TIMER #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER memset(fast_timers, 0, sizeof(fast_timers)); diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 3ad079ffd049..5b9bc19ed134 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -800,8 +800,8 @@ static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev) tty_port_init(pport); pport->ops = &ifx_tty_port_ops; ifx_dev->minor = IFX_SPI_TTY_ID; - ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor, - &ifx_dev->spi_dev->dev); + ifx_dev->tty_dev = tty_port_register_device(pport, tty_drv, + ifx_dev->minor, &ifx_dev->spi_dev->dev); if (IS_ERR(ifx_dev->tty_dev)) { dev_dbg(&ifx_dev->spi_dev->dev, "%s: registering tty device failed", __func__); diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index d5c689d6217e..72ec56e6d42f 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -206,7 +206,7 @@ struct imx_port { unsigned short trcv_delay; /* transceiver delay */ struct clk *clk_ipg; struct clk *clk_per; - struct imx_uart_data *devdata; + const struct imx_uart_data *devdata; }; struct imx_port_ucrs { @@ -1505,18 +1505,21 @@ static int serial_imx_probe(struct platform_device *pdev) pinctrl = devm_pinctrl_get_select_default(&pdev->dev); if (IS_ERR(pinctrl)) { ret = PTR_ERR(pinctrl); + dev_err(&pdev->dev, "failed to get default pinctrl: %d\n", ret); goto unmap; } sport->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); if (IS_ERR(sport->clk_ipg)) { ret = PTR_ERR(sport->clk_ipg); + dev_err(&pdev->dev, "failed to get ipg clk: %d\n", ret); goto unmap; } sport->clk_per = devm_clk_get(&pdev->dev, "per"); if (IS_ERR(sport->clk_per)) { ret = PTR_ERR(sport->clk_per); + dev_err(&pdev->dev, "failed to get per clk: %d\n", ret); goto unmap; } diff --git a/drivers/tty/serial/ioc3_serial.c b/drivers/tty/serial/ioc3_serial.c index 758ff310f7f8..5ac52898a0bb 100644 --- a/drivers/tty/serial/ioc3_serial.c +++ b/drivers/tty/serial/ioc3_serial.c @@ -1120,13 +1120,14 @@ static inline int do_read(struct uart_port *the_port, char *buf, int len) struct ioc3_port *port = get_ioc3_port(the_port); struct ring *inring; struct ring_entry *entry; - struct port_hooks *hooks = port->ip_hooks; + struct port_hooks *hooks; int byte_num; char *sc; int loop_counter; BUG_ON(!(len >= 0)); BUG_ON(!port); + hooks = port->ip_hooks; /* There is a nasty timing issue in the IOC3. When the rx_timer * expires or the rx_high condition arises, we take an interrupt. diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c index e16894fb2ca3..3e7da10cebba 100644 --- a/drivers/tty/serial/ioc4_serial.c +++ b/drivers/tty/serial/ioc4_serial.c @@ -1803,7 +1803,7 @@ static inline int ic4_startup_local(struct uart_port *the_port) ioc4_set_proto(port, the_port->mapbase); /* set the speed of the serial port */ - ioc4_change_speed(the_port, state->port.tty->termios, + ioc4_change_speed(the_port, &state->port.tty->termios, (struct ktermios *)0); return 0; @@ -2069,13 +2069,14 @@ static inline int do_read(struct uart_port *the_port, unsigned char *buf, struct ioc4_port *port = get_ioc4_port(the_port, 0); struct ring *inring; struct ring_entry *entry; - struct hooks *hooks = port->ip_hooks; + struct hooks *hooks; int byte_num; char *sc; int loop_counter; BUG_ON(!(len >= 0)); BUG_ON(!port); + hooks = port->ip_hooks; /* There is a nasty timing issue in the IOC4. When the rx_timer * expires or the rx_high condition arises, we take an interrupt. diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c index 434bd881fcae..71397961773c 100644 --- a/drivers/tty/serial/jsm/jsm_tty.c +++ b/drivers/tty/serial/jsm/jsm_tty.c @@ -161,7 +161,7 @@ static void jsm_tty_send_xchar(struct uart_port *port, char ch) struct ktermios *termios; spin_lock_irqsave(&port->lock, lock_flags); - termios = port->state->port.tty->termios; + termios = &port->state->port.tty->termios; if (ch == termios->c_cc[VSTART]) channel->ch_bd->bd_ops->send_start_character(channel); @@ -250,7 +250,7 @@ static int jsm_tty_open(struct uart_port *port) channel->ch_cached_lsr = 0; channel->ch_stops_sent = 0; - termios = port->state->port.tty->termios; + termios = &port->state->port.tty->termios; channel->ch_c_cflag = termios->c_cflag; channel->ch_c_iflag = termios->c_iflag; channel->ch_c_oflag = termios->c_oflag; @@ -283,7 +283,7 @@ static void jsm_tty_close(struct uart_port *port) jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n"); bd = channel->ch_bd; - ts = port->state->port.tty->termios; + ts = &port->state->port.tty->termios; channel->ch_flags &= ~(CH_STOPI); @@ -567,7 +567,7 @@ void jsm_input(struct jsm_channel *ch) *input data and return immediately. */ if (!tp || - !(tp->termios->c_cflag & CREAD) ) { + !(tp->termios.c_cflag & CREAD) ) { jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "input. dropping %d bytes on port %d...\n", data_len, ch->ch_portnum); diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c new file mode 100644 index 000000000000..ba3af3bf6d43 --- /dev/null +++ b/drivers/tty/serial/lpc32xx_hs.c @@ -0,0 +1,823 @@ +/* + * High Speed Serial Ports on NXP LPC32xx SoC + * + * Authors: Kevin Wells <kevin.wells@nxp.com> + * Roland Stigge <stigge@antcom.de> + * + * Copyright (C) 2010 NXP Semiconductors + * Copyright (C) 2012 Roland Stigge + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/sysrq.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/nmi.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include <mach/platform.h> +#include <mach/hardware.h> + +/* + * High Speed UART register offsets + */ +#define LPC32XX_HSUART_FIFO(x) ((x) + 0x00) +#define LPC32XX_HSUART_LEVEL(x) ((x) + 0x04) +#define LPC32XX_HSUART_IIR(x) ((x) + 0x08) +#define LPC32XX_HSUART_CTRL(x) ((x) + 0x0C) +#define LPC32XX_HSUART_RATE(x) ((x) + 0x10) + +#define LPC32XX_HSU_BREAK_DATA (1 << 10) +#define LPC32XX_HSU_ERROR_DATA (1 << 9) +#define LPC32XX_HSU_RX_EMPTY (1 << 8) + +#define LPC32XX_HSU_TX_LEV(n) (((n) >> 8) & 0xFF) +#define LPC32XX_HSU_RX_LEV(n) ((n) & 0xFF) + +#define LPC32XX_HSU_TX_INT_SET (1 << 6) +#define LPC32XX_HSU_RX_OE_INT (1 << 5) +#define LPC32XX_HSU_BRK_INT (1 << 4) +#define LPC32XX_HSU_FE_INT (1 << 3) +#define LPC32XX_HSU_RX_TIMEOUT_INT (1 << 2) +#define LPC32XX_HSU_RX_TRIG_INT (1 << 1) +#define LPC32XX_HSU_TX_INT (1 << 0) + +#define LPC32XX_HSU_HRTS_INV (1 << 21) +#define LPC32XX_HSU_HRTS_TRIG_8B (0x0 << 19) +#define LPC32XX_HSU_HRTS_TRIG_16B (0x1 << 19) +#define LPC32XX_HSU_HRTS_TRIG_32B (0x2 << 19) +#define LPC32XX_HSU_HRTS_TRIG_48B (0x3 << 19) +#define LPC32XX_HSU_HRTS_EN (1 << 18) +#define LPC32XX_HSU_TMO_DISABLED (0x0 << 16) +#define LPC32XX_HSU_TMO_INACT_4B (0x1 << 16) +#define LPC32XX_HSU_TMO_INACT_8B (0x2 << 16) +#define LPC32XX_HSU_TMO_INACT_16B (0x3 << 16) +#define LPC32XX_HSU_HCTS_INV (1 << 15) +#define LPC32XX_HSU_HCTS_EN (1 << 14) +#define LPC32XX_HSU_OFFSET(n) ((n) << 9) +#define LPC32XX_HSU_BREAK (1 << 8) +#define LPC32XX_HSU_ERR_INT_EN (1 << 7) +#define LPC32XX_HSU_RX_INT_EN (1 << 6) +#define LPC32XX_HSU_TX_INT_EN (1 << 5) +#define LPC32XX_HSU_RX_TL1B (0x0 << 2) +#define LPC32XX_HSU_RX_TL4B (0x1 << 2) +#define LPC32XX_HSU_RX_TL8B (0x2 << 2) +#define LPC32XX_HSU_RX_TL16B (0x3 << 2) +#define LPC32XX_HSU_RX_TL32B (0x4 << 2) +#define LPC32XX_HSU_RX_TL48B (0x5 << 2) +#define LPC32XX_HSU_TX_TLEMPTY (0x0 << 0) +#define LPC32XX_HSU_TX_TL0B (0x0 << 0) +#define LPC32XX_HSU_TX_TL4B (0x1 << 0) +#define LPC32XX_HSU_TX_TL8B (0x2 << 0) +#define LPC32XX_HSU_TX_TL16B (0x3 << 0) + +#define MODNAME "lpc32xx_hsuart" + +struct lpc32xx_hsuart_port { + struct uart_port port; +}; + +#define FIFO_READ_LIMIT 128 +#define MAX_PORTS 3 +#define LPC32XX_TTY_NAME "ttyTX" +static struct lpc32xx_hsuart_port lpc32xx_hs_ports[MAX_PORTS]; + +#ifdef CONFIG_SERIAL_HS_LPC32XX_CONSOLE +static void wait_for_xmit_empty(struct uart_port *port) +{ + unsigned int timeout = 10000; + + do { + if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL( + port->membase))) == 0) + break; + if (--timeout == 0) + break; + udelay(1); + } while (1); +} + +static void wait_for_xmit_ready(struct uart_port *port) +{ + unsigned int timeout = 10000; + + while (1) { + if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL( + port->membase))) < 32) + break; + if (--timeout == 0) + break; + udelay(1); + } +} + +static void lpc32xx_hsuart_console_putchar(struct uart_port *port, int ch) +{ + wait_for_xmit_ready(port); + writel((u32)ch, LPC32XX_HSUART_FIFO(port->membase)); +} + +static void lpc32xx_hsuart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct lpc32xx_hsuart_port *up = &lpc32xx_hs_ports[co->index]; + unsigned long flags; + int locked = 1; + + touch_nmi_watchdog(); + local_irq_save(flags); + if (up->port.sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&up->port.lock); + else + spin_lock(&up->port.lock); + + uart_console_write(&up->port, s, count, lpc32xx_hsuart_console_putchar); + wait_for_xmit_empty(&up->port); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +static int __init lpc32xx_hsuart_console_setup(struct console *co, + char *options) +{ + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index >= MAX_PORTS) + co->index = 0; + + port = &lpc32xx_hs_ports[co->index].port; + if (!port->membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver lpc32xx_hsuart_reg; +static struct console lpc32xx_hsuart_console = { + .name = LPC32XX_TTY_NAME, + .write = lpc32xx_hsuart_console_write, + .device = uart_console_device, + .setup = lpc32xx_hsuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &lpc32xx_hsuart_reg, +}; + +static int __init lpc32xx_hsuart_console_init(void) +{ + register_console(&lpc32xx_hsuart_console); + return 0; +} +console_initcall(lpc32xx_hsuart_console_init); + +#define LPC32XX_HSUART_CONSOLE (&lpc32xx_hsuart_console) +#else +#define LPC32XX_HSUART_CONSOLE NULL +#endif + +static struct uart_driver lpc32xx_hs_reg = { + .owner = THIS_MODULE, + .driver_name = MODNAME, + .dev_name = LPC32XX_TTY_NAME, + .nr = MAX_PORTS, + .cons = LPC32XX_HSUART_CONSOLE, +}; +static int uarts_registered; + +static unsigned int __serial_get_clock_div(unsigned long uartclk, + unsigned long rate) +{ + u32 div, goodrate, hsu_rate, l_hsu_rate, comprate; + u32 rate_diff; + + /* Find the closest divider to get the desired clock rate */ + div = uartclk / rate; + goodrate = hsu_rate = (div / 14) - 1; + if (hsu_rate != 0) + hsu_rate--; + + /* Tweak divider */ + l_hsu_rate = hsu_rate + 3; + rate_diff = 0xFFFFFFFF; + + while (hsu_rate < l_hsu_rate) { + comprate = uartclk / ((hsu_rate + 1) * 14); + if (abs(comprate - rate) < rate_diff) { + goodrate = hsu_rate; + rate_diff = abs(comprate - rate); + } + + hsu_rate++; + } + if (hsu_rate > 0xFF) + hsu_rate = 0xFF; + + return goodrate; +} + +static void __serial_uart_flush(struct uart_port *port) +{ + u32 tmp; + int cnt = 0; + + while ((readl(LPC32XX_HSUART_LEVEL(port->membase)) > 0) && + (cnt++ < FIFO_READ_LIMIT)) + tmp = readl(LPC32XX_HSUART_FIFO(port->membase)); +} + +static void __serial_lpc32xx_rx(struct uart_port *port) +{ + unsigned int tmp, flag; + struct tty_struct *tty = tty_port_tty_get(&port->state->port); + + if (!tty) { + /* Discard data: no tty available */ + while (!(readl(LPC32XX_HSUART_FIFO(port->membase)) & + LPC32XX_HSU_RX_EMPTY)) + ; + + return; + } + + /* Read data from FIFO and push into terminal */ + tmp = readl(LPC32XX_HSUART_FIFO(port->membase)); + while (!(tmp & LPC32XX_HSU_RX_EMPTY)) { + flag = TTY_NORMAL; + port->icount.rx++; + + if (tmp & LPC32XX_HSU_ERROR_DATA) { + /* Framing error */ + writel(LPC32XX_HSU_FE_INT, + LPC32XX_HSUART_IIR(port->membase)); + port->icount.frame++; + flag = TTY_FRAME; + tty_insert_flip_char(tty, 0, TTY_FRAME); + } + + tty_insert_flip_char(tty, (tmp & 0xFF), flag); + + tmp = readl(LPC32XX_HSUART_FIFO(port->membase)); + } + tty_flip_buffer_push(tty); + tty_kref_put(tty); +} + +static void __serial_lpc32xx_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned int tmp; + + if (port->x_char) { + writel((u32)port->x_char, LPC32XX_HSUART_FIFO(port->membase)); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + goto exit_tx; + + /* Transfer data */ + while (LPC32XX_HSU_TX_LEV(readl( + LPC32XX_HSUART_LEVEL(port->membase))) < 64) { + writel((u32) xmit->buf[xmit->tail], + LPC32XX_HSUART_FIFO(port->membase)); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + +exit_tx: + if (uart_circ_empty(xmit)) { + tmp = readl(LPC32XX_HSUART_CTRL(port->membase)); + tmp &= ~LPC32XX_HSU_TX_INT_EN; + writel(tmp, LPC32XX_HSUART_CTRL(port->membase)); + } +} + +static irqreturn_t serial_lpc32xx_interrupt(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct tty_struct *tty = tty_port_tty_get(&port->state->port); + u32 status; + + spin_lock(&port->lock); + + /* Read UART status and clear latched interrupts */ + status = readl(LPC32XX_HSUART_IIR(port->membase)); + + if (status & LPC32XX_HSU_BRK_INT) { + /* Break received */ + writel(LPC32XX_HSU_BRK_INT, LPC32XX_HSUART_IIR(port->membase)); + port->icount.brk++; + uart_handle_break(port); + } + + /* Framing error */ + if (status & LPC32XX_HSU_FE_INT) + writel(LPC32XX_HSU_FE_INT, LPC32XX_HSUART_IIR(port->membase)); + + if (status & LPC32XX_HSU_RX_OE_INT) { + /* Receive FIFO overrun */ + writel(LPC32XX_HSU_RX_OE_INT, + LPC32XX_HSUART_IIR(port->membase)); + port->icount.overrun++; + if (tty) { + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_schedule_flip(tty); + } + } + + /* Data received? */ + if (status & (LPC32XX_HSU_RX_TIMEOUT_INT | LPC32XX_HSU_RX_TRIG_INT)) { + __serial_lpc32xx_rx(port); + if (tty) + tty_flip_buffer_push(tty); + } + + /* Transmit data request? */ + if ((status & LPC32XX_HSU_TX_INT) && (!uart_tx_stopped(port))) { + writel(LPC32XX_HSU_TX_INT, LPC32XX_HSUART_IIR(port->membase)); + __serial_lpc32xx_tx(port); + } + + spin_unlock(&port->lock); + tty_kref_put(tty); + + return IRQ_HANDLED; +} + +/* port->lock is not held. */ +static unsigned int serial_lpc32xx_tx_empty(struct uart_port *port) +{ + unsigned int ret = 0; + + if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL(port->membase))) == 0) + ret = TIOCSER_TEMT; + + return ret; +} + +/* port->lock held by caller. */ +static void serial_lpc32xx_set_mctrl(struct uart_port *port, + unsigned int mctrl) +{ + /* No signals are supported on HS UARTs */ +} + +/* port->lock is held by caller and interrupts are disabled. */ +static unsigned int serial_lpc32xx_get_mctrl(struct uart_port *port) +{ + /* No signals are supported on HS UARTs */ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +/* port->lock held by caller. */ +static void serial_lpc32xx_stop_tx(struct uart_port *port) +{ + u32 tmp; + + tmp = readl(LPC32XX_HSUART_CTRL(port->membase)); + tmp &= ~LPC32XX_HSU_TX_INT_EN; + writel(tmp, LPC32XX_HSUART_CTRL(port->membase)); +} + +/* port->lock held by caller. */ +static void serial_lpc32xx_start_tx(struct uart_port *port) +{ + u32 tmp; + + __serial_lpc32xx_tx(port); + tmp = readl(LPC32XX_HSUART_CTRL(port->membase)); + tmp |= LPC32XX_HSU_TX_INT_EN; + writel(tmp, LPC32XX_HSUART_CTRL(port->membase)); +} + +/* port->lock held by caller. */ +static void serial_lpc32xx_stop_rx(struct uart_port *port) +{ + u32 tmp; + + tmp = readl(LPC32XX_HSUART_CTRL(port->membase)); + tmp &= ~(LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN); + writel(tmp, LPC32XX_HSUART_CTRL(port->membase)); + + writel((LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT | + LPC32XX_HSU_FE_INT), LPC32XX_HSUART_IIR(port->membase)); +} + +/* port->lock held by caller. */ +static void serial_lpc32xx_enable_ms(struct uart_port *port) +{ + /* Modem status is not supported */ +} + +/* port->lock is not held. */ +static void serial_lpc32xx_break_ctl(struct uart_port *port, + int break_state) +{ + unsigned long flags; + u32 tmp; + + spin_lock_irqsave(&port->lock, flags); + tmp = readl(LPC32XX_HSUART_CTRL(port->membase)); + if (break_state != 0) + tmp |= LPC32XX_HSU_BREAK; + else + tmp &= ~LPC32XX_HSU_BREAK; + writel(tmp, LPC32XX_HSUART_CTRL(port->membase)); + spin_unlock_irqrestore(&port->lock, flags); +} + +/* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */ +static void lpc32xx_loopback_set(resource_size_t mapbase, int state) +{ + int bit; + u32 tmp; + + switch (mapbase) { + case LPC32XX_HS_UART1_BASE: + bit = 0; + break; + case LPC32XX_HS_UART2_BASE: + bit = 1; + break; + case LPC32XX_HS_UART7_BASE: + bit = 6; + break; + default: + WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase); + return; + } + + tmp = readl(LPC32XX_UARTCTL_CLOOP); + if (state) + tmp |= (1 << bit); + else + tmp &= ~(1 << bit); + writel(tmp, LPC32XX_UARTCTL_CLOOP); +} + +/* port->lock is not held. */ +static int serial_lpc32xx_startup(struct uart_port *port) +{ + int retval; + unsigned long flags; + u32 tmp; + + spin_lock_irqsave(&port->lock, flags); + + __serial_uart_flush(port); + + writel((LPC32XX_HSU_TX_INT | LPC32XX_HSU_FE_INT | + LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT), + LPC32XX_HSUART_IIR(port->membase)); + + writel(0xFF, LPC32XX_HSUART_RATE(port->membase)); + + /* + * Set receiver timeout, HSU offset of 20, no break, no interrupts, + * and default FIFO trigger levels + */ + tmp = LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B | + LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B; + writel(tmp, LPC32XX_HSUART_CTRL(port->membase)); + + lpc32xx_loopback_set(port->mapbase, 0); /* get out of loopback mode */ + + spin_unlock_irqrestore(&port->lock, flags); + + retval = request_irq(port->irq, serial_lpc32xx_interrupt, + 0, MODNAME, port); + if (!retval) + writel((tmp | LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN), + LPC32XX_HSUART_CTRL(port->membase)); + + return retval; +} + +/* port->lock is not held. */ +static void serial_lpc32xx_shutdown(struct uart_port *port) +{ + u32 tmp; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + tmp = LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B | + LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B; + writel(tmp, LPC32XX_HSUART_CTRL(port->membase)); + + lpc32xx_loopback_set(port->mapbase, 1); /* go to loopback mode */ + + spin_unlock_irqrestore(&port->lock, flags); + + free_irq(port->irq, port); +} + +/* port->lock is not held. */ +static void serial_lpc32xx_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, quot; + u32 tmp; + + /* Always 8-bit, no parity, 1 stop bit */ + termios->c_cflag &= ~(CSIZE | CSTOPB | PARENB | PARODD); + termios->c_cflag |= CS8; + + termios->c_cflag &= ~(HUPCL | CMSPAR | CLOCAL | CRTSCTS); + + baud = uart_get_baud_rate(port, termios, old, 0, + port->uartclk / 14); + + quot = __serial_get_clock_div(port->uartclk, baud); + + spin_lock_irqsave(&port->lock, flags); + + /* Ignore characters? */ + tmp = readl(LPC32XX_HSUART_CTRL(port->membase)); + if ((termios->c_cflag & CREAD) == 0) + tmp &= ~(LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN); + else + tmp |= LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN; + writel(tmp, LPC32XX_HSUART_CTRL(port->membase)); + + writel(quot, LPC32XX_HSUART_RATE(port->membase)); + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); +} + +static const char *serial_lpc32xx_type(struct uart_port *port) +{ + return MODNAME; +} + +static void serial_lpc32xx_release_port(struct uart_port *port) +{ + if ((port->iotype == UPIO_MEM32) && (port->mapbase)) { + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + + release_mem_region(port->mapbase, SZ_4K); + } +} + +static int serial_lpc32xx_request_port(struct uart_port *port) +{ + int ret = -ENODEV; + + if ((port->iotype == UPIO_MEM32) && (port->mapbase)) { + ret = 0; + + if (!request_mem_region(port->mapbase, SZ_4K, MODNAME)) + ret = -EBUSY; + else if (port->flags & UPF_IOREMAP) { + port->membase = ioremap(port->mapbase, SZ_4K); + if (!port->membase) { + release_mem_region(port->mapbase, SZ_4K); + ret = -ENOMEM; + } + } + } + + return ret; +} + +static void serial_lpc32xx_config_port(struct uart_port *port, int uflags) +{ + int ret; + + ret = serial_lpc32xx_request_port(port); + if (ret < 0) + return; + port->type = PORT_UART00; + port->fifosize = 64; + + __serial_uart_flush(port); + + writel((LPC32XX_HSU_TX_INT | LPC32XX_HSU_FE_INT | + LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT), + LPC32XX_HSUART_IIR(port->membase)); + + writel(0xFF, LPC32XX_HSUART_RATE(port->membase)); + + /* Set receiver timeout, HSU offset of 20, no break, no interrupts, + and default FIFO trigger levels */ + writel(LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B | + LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B, + LPC32XX_HSUART_CTRL(port->membase)); +} + +static int serial_lpc32xx_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + int ret = 0; + + if (ser->type != PORT_UART00) + ret = -EINVAL; + + return ret; +} + +static struct uart_ops serial_lpc32xx_pops = { + .tx_empty = serial_lpc32xx_tx_empty, + .set_mctrl = serial_lpc32xx_set_mctrl, + .get_mctrl = serial_lpc32xx_get_mctrl, + .stop_tx = serial_lpc32xx_stop_tx, + .start_tx = serial_lpc32xx_start_tx, + .stop_rx = serial_lpc32xx_stop_rx, + .enable_ms = serial_lpc32xx_enable_ms, + .break_ctl = serial_lpc32xx_break_ctl, + .startup = serial_lpc32xx_startup, + .shutdown = serial_lpc32xx_shutdown, + .set_termios = serial_lpc32xx_set_termios, + .type = serial_lpc32xx_type, + .release_port = serial_lpc32xx_release_port, + .request_port = serial_lpc32xx_request_port, + .config_port = serial_lpc32xx_config_port, + .verify_port = serial_lpc32xx_verify_port, +}; + +/* + * Register a set of serial devices attached to a platform device + */ +static int __devinit serial_hs_lpc32xx_probe(struct platform_device *pdev) +{ + struct lpc32xx_hsuart_port *p = &lpc32xx_hs_ports[uarts_registered]; + int ret = 0; + struct resource *res; + + if (uarts_registered >= MAX_PORTS) { + dev_err(&pdev->dev, + "Error: Number of possible ports exceeded (%d)!\n", + uarts_registered + 1); + return -ENXIO; + } + + memset(p, 0, sizeof(*p)); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, + "Error getting mem resource for HS UART port %d\n", + uarts_registered); + return -ENXIO; + } + p->port.mapbase = res->start; + p->port.membase = NULL; + + p->port.irq = platform_get_irq(pdev, 0); + if (p->port.irq < 0) { + dev_err(&pdev->dev, "Error getting irq for HS UART port %d\n", + uarts_registered); + return p->port.irq; + } + + p->port.iotype = UPIO_MEM32; + p->port.uartclk = LPC32XX_MAIN_OSC_FREQ; + p->port.regshift = 2; + p->port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP; + p->port.dev = &pdev->dev; + p->port.ops = &serial_lpc32xx_pops; + p->port.line = uarts_registered++; + spin_lock_init(&p->port.lock); + + /* send port to loopback mode by default */ + lpc32xx_loopback_set(p->port.mapbase, 1); + + ret = uart_add_one_port(&lpc32xx_hs_reg, &p->port); + + platform_set_drvdata(pdev, p); + + return ret; +} + +/* + * Remove serial ports registered against a platform device. + */ +static int __devexit serial_hs_lpc32xx_remove(struct platform_device *pdev) +{ + struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev); + + uart_remove_one_port(&lpc32xx_hs_reg, &p->port); + + return 0; +} + + +#ifdef CONFIG_PM +static int serial_hs_lpc32xx_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev); + + uart_suspend_port(&lpc32xx_hs_reg, &p->port); + + return 0; +} + +static int serial_hs_lpc32xx_resume(struct platform_device *pdev) +{ + struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev); + + uart_resume_port(&lpc32xx_hs_reg, &p->port); + + return 0; +} +#else +#define serial_hs_lpc32xx_suspend NULL +#define serial_hs_lpc32xx_resume NULL +#endif + +static const struct of_device_id serial_hs_lpc32xx_dt_ids[] = { + { .compatible = "nxp,lpc3220-hsuart" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, serial_hs_lpc32xx_dt_ids); + +static struct platform_driver serial_hs_lpc32xx_driver = { + .probe = serial_hs_lpc32xx_probe, + .remove = __devexit_p(serial_hs_lpc32xx_remove), + .suspend = serial_hs_lpc32xx_suspend, + .resume = serial_hs_lpc32xx_resume, + .driver = { + .name = MODNAME, + .owner = THIS_MODULE, + .of_match_table = serial_hs_lpc32xx_dt_ids, + }, +}; + +static int __init lpc32xx_hsuart_init(void) +{ + int ret; + + ret = uart_register_driver(&lpc32xx_hs_reg); + if (ret) + return ret; + + ret = platform_driver_register(&serial_hs_lpc32xx_driver); + if (ret) + uart_unregister_driver(&lpc32xx_hs_reg); + + return ret; +} + +static void __exit lpc32xx_hsuart_exit(void) +{ + platform_driver_unregister(&serial_hs_lpc32xx_driver); + uart_unregister_driver(&lpc32xx_hs_reg); +} + +module_init(lpc32xx_hsuart_init); +module_exit(lpc32xx_hsuart_exit); + +MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>"); +MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>"); +MODULE_DESCRIPTION("NXP LPC32XX High Speed UART driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c index a0703624d5e5..b13949ad3408 100644 --- a/drivers/tty/serial/m32r_sio.c +++ b/drivers/tty/serial/m32r_sio.c @@ -44,8 +44,6 @@ #include <asm/io.h> #include <asm/irq.h> -#define PORT_M32R_BASE PORT_M32R_SIO -#define PORT_INDEX(x) (x - PORT_M32R_BASE + 1) #define BAUD_RATE 115200 #include <linux/serial_core.h> @@ -132,22 +130,6 @@ struct irq_info { static struct irq_info irq_lists[NR_IRQS]; -/* - * Here we define the default xmit fifo size used for each type of UART. - */ -static const struct serial_uart_config uart_config[] = { - [PORT_UNKNOWN] = { - .name = "unknown", - .dfl_xmit_fifo_size = 1, - .flags = 0, - }, - [PORT_INDEX(PORT_M32R_SIO)] = { - .name = "M32RSIO", - .dfl_xmit_fifo_size = 1, - .flags = 0, - }, -}; - #ifdef CONFIG_SERIAL_M32R_PLDSIO #define __sio_in(x) inw((unsigned long)(x)) @@ -907,8 +889,7 @@ static void m32r_sio_config_port(struct uart_port *port, int unused) spin_lock_irqsave(&up->port.lock, flags); - up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1); - up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; + up->port.fifosize = 1; spin_unlock_irqrestore(&up->port.lock, flags); } @@ -916,23 +897,11 @@ static void m32r_sio_config_port(struct uart_port *port, int unused) static int m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser) { - if (ser->irq >= nr_irqs || ser->irq < 0 || - ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || - ser->type >= ARRAY_SIZE(uart_config)) + if (ser->irq >= nr_irqs || ser->irq < 0 || ser->baud_base < 9600) return -EINVAL; return 0; } -static const char * -m32r_sio_type(struct uart_port *port) -{ - int type = port->type; - - if (type >= ARRAY_SIZE(uart_config)) - type = 0; - return uart_config[type].name; -} - static struct uart_ops m32r_sio_pops = { .tx_empty = m32r_sio_tx_empty, .set_mctrl = m32r_sio_set_mctrl, @@ -946,7 +915,6 @@ static struct uart_ops m32r_sio_pops = { .shutdown = m32r_sio_shutdown, .set_termios = m32r_sio_set_termios, .pm = m32r_sio_pm, - .type = m32r_sio_type, .release_port = m32r_sio_release_port, .request_port = m32r_sio_request_port, .config_port = m32r_sio_config_port, diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c index b4902b99cfd2..46043c2521ce 100644 --- a/drivers/tty/serial/max3100.c +++ b/drivers/tty/serial/max3100.c @@ -910,17 +910,7 @@ static struct spi_driver max3100_driver = { .resume = max3100_resume, }; -static int __init max3100_init(void) -{ - return spi_register_driver(&max3100_driver); -} -module_init(max3100_init); - -static void __exit max3100_exit(void) -{ - spi_unregister_driver(&max3100_driver); -} -module_exit(max3100_exit); +module_spi_driver(max3100_driver); MODULE_DESCRIPTION("MAX3100 driver"); MODULE_AUTHOR("Christian Pellegrin <chripell@evolware.org>"); diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c deleted file mode 100644 index 17c7ba805d98..000000000000 --- a/drivers/tty/serial/max3107.c +++ /dev/null @@ -1,1215 +0,0 @@ -/* - * max3107.c - spi uart protocol driver for Maxim 3107 - * Based on max3100.c - * by Christian Pellegrin <chripell@evolware.org> - * and max3110.c - * by Feng Tang <feng.tang@intel.com> - * - * Copyright (C) Aavamobile 2009 - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - */ - -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/serial_core.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/gpio.h> -#include <linux/spi/spi.h> -#include <linux/freezer.h> -#include <linux/module.h> -#include "max3107.h" - -static const struct baud_table brg26_ext[] = { - { 300, MAX3107_BRG26_B300 }, - { 600, MAX3107_BRG26_B600 }, - { 1200, MAX3107_BRG26_B1200 }, - { 2400, MAX3107_BRG26_B2400 }, - { 4800, MAX3107_BRG26_B4800 }, - { 9600, MAX3107_BRG26_B9600 }, - { 19200, MAX3107_BRG26_B19200 }, - { 57600, MAX3107_BRG26_B57600 }, - { 115200, MAX3107_BRG26_B115200 }, - { 230400, MAX3107_BRG26_B230400 }, - { 460800, MAX3107_BRG26_B460800 }, - { 921600, MAX3107_BRG26_B921600 }, - { 0, 0 } -}; - -static const struct baud_table brg13_int[] = { - { 300, MAX3107_BRG13_IB300 }, - { 600, MAX3107_BRG13_IB600 }, - { 1200, MAX3107_BRG13_IB1200 }, - { 2400, MAX3107_BRG13_IB2400 }, - { 4800, MAX3107_BRG13_IB4800 }, - { 9600, MAX3107_BRG13_IB9600 }, - { 19200, MAX3107_BRG13_IB19200 }, - { 57600, MAX3107_BRG13_IB57600 }, - { 115200, MAX3107_BRG13_IB115200 }, - { 230400, MAX3107_BRG13_IB230400 }, - { 460800, MAX3107_BRG13_IB460800 }, - { 921600, MAX3107_BRG13_IB921600 }, - { 0, 0 } -}; - -static u32 get_new_brg(int baud, struct max3107_port *s) -{ - int i; - const struct baud_table *baud_tbl = s->baud_tbl; - - for (i = 0; i < 13; i++) { - if (baud == baud_tbl[i].baud) - return baud_tbl[i].new_brg; - } - - return 0; -} - -/* Perform SPI transfer for write/read of device register(s) */ -int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len) -{ - struct spi_message spi_msg; - struct spi_transfer spi_xfer; - - /* Initialize SPI ,message */ - spi_message_init(&spi_msg); - - /* Initialize SPI transfer */ - memset(&spi_xfer, 0, sizeof spi_xfer); - spi_xfer.len = len; - spi_xfer.tx_buf = tx; - spi_xfer.rx_buf = rx; - spi_xfer.speed_hz = MAX3107_SPI_SPEED; - - /* Add SPI transfer to SPI message */ - spi_message_add_tail(&spi_xfer, &spi_msg); - -#ifdef DBG_TRACE_SPI_DATA - { - int i; - pr_info("tx len %d:\n", spi_xfer.len); - for (i = 0 ; i < spi_xfer.len && i < 32 ; i++) - pr_info(" %x", ((u8 *)spi_xfer.tx_buf)[i]); - pr_info("\n"); - } -#endif - - /* Perform synchronous SPI transfer */ - if (spi_sync(s->spi, &spi_msg)) { - dev_err(&s->spi->dev, "spi_sync failure\n"); - return -EIO; - } - -#ifdef DBG_TRACE_SPI_DATA - if (spi_xfer.rx_buf) { - int i; - pr_info("rx len %d:\n", spi_xfer.len); - for (i = 0 ; i < spi_xfer.len && i < 32 ; i++) - pr_info(" %x", ((u8 *)spi_xfer.rx_buf)[i]); - pr_info("\n"); - } -#endif - return 0; -} -EXPORT_SYMBOL_GPL(max3107_rw); - -/* Puts received data to circular buffer */ -static void put_data_to_circ_buf(struct max3107_port *s, unsigned char *data, - int len) -{ - struct uart_port *port = &s->port; - struct tty_struct *tty; - - if (!port->state) - return; - - tty = port->state->port.tty; - if (!tty) - return; - - /* Insert received data */ - tty_insert_flip_string(tty, data, len); - /* Update RX counter */ - port->icount.rx += len; -} - -/* Handle data receiving */ -static void max3107_handlerx(struct max3107_port *s, u16 rxlvl) -{ - int i; - int j; - int len; /* SPI transfer buffer length */ - u16 *buf; - u8 *valid_str; - - if (!s->rx_enabled) - /* RX is disabled */ - return; - - if (rxlvl == 0) { - /* RX fifo is empty */ - return; - } else if (rxlvl >= MAX3107_RX_FIFO_SIZE) { - dev_warn(&s->spi->dev, "Possible RX FIFO overrun %d\n", rxlvl); - /* Ensure sanity of RX level */ - rxlvl = MAX3107_RX_FIFO_SIZE; - } - if ((s->rxbuf == 0) || (s->rxstr == 0)) { - dev_warn(&s->spi->dev, "Rx buffer/str isn't ready\n"); - return; - } - buf = s->rxbuf; - valid_str = s->rxstr; - while (rxlvl) { - pr_debug("rxlvl %d\n", rxlvl); - /* Clear buffer */ - memset(buf, 0, sizeof(u16) * (MAX3107_RX_FIFO_SIZE + 2)); - len = 0; - if (s->irqen_reg & MAX3107_IRQ_RXFIFO_BIT) { - /* First disable RX FIFO interrupt */ - pr_debug("Disabling RX INT\n"); - buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); - s->irqen_reg &= ~MAX3107_IRQ_RXFIFO_BIT; - buf[0] |= s->irqen_reg; - len++; - } - /* Just increase the length by amount of words in FIFO since - * buffer was zeroed and SPI transfer of 0x0000 means reading - * from RX FIFO - */ - len += rxlvl; - /* Append RX level query */ - buf[len] = MAX3107_RXFIFOLVL_REG; - len++; - - /* Perform the SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, len * 2)) { - dev_err(&s->spi->dev, "SPI transfer for RX h failed\n"); - return; - } - - /* Skip RX FIFO interrupt disabling word if it was added */ - j = ((len - 1) - rxlvl); - /* Read received words */ - for (i = 0; i < rxlvl; i++, j++) - valid_str[i] = (u8)buf[j]; - put_data_to_circ_buf(s, valid_str, rxlvl); - /* Get new RX level */ - rxlvl = (buf[len - 1] & MAX3107_SPI_RX_DATA_MASK); - } - - if (s->rx_enabled) { - /* RX still enabled, re-enable RX FIFO interrupt */ - pr_debug("Enabling RX INT\n"); - buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); - s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT; - buf[0] |= s->irqen_reg; - if (max3107_rw(s, (u8 *)buf, NULL, 2)) - dev_err(&s->spi->dev, "RX FIFO INT enabling failed\n"); - } - - /* Push the received data to receivers */ - if (s->port.state->port.tty) - tty_flip_buffer_push(s->port.state->port.tty); -} - - -/* Handle data sending */ -static void max3107_handletx(struct max3107_port *s) -{ - struct circ_buf *xmit = &s->port.state->xmit; - int i; - unsigned long flags; - int len; /* SPI transfer buffer length */ - u16 *buf; - - if (!s->tx_fifo_empty) - /* Don't send more data before previous data is sent */ - return; - - if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port)) - /* No data to send or TX is stopped */ - return; - - if (!s->txbuf) { - dev_warn(&s->spi->dev, "Txbuf isn't ready\n"); - return; - } - buf = s->txbuf; - /* Get length of data pending in circular buffer */ - len = uart_circ_chars_pending(xmit); - if (len) { - /* Limit to size of TX FIFO */ - if (len > MAX3107_TX_FIFO_SIZE) - len = MAX3107_TX_FIFO_SIZE; - - pr_debug("txlen %d\n", len); - - /* Update TX counter */ - s->port.icount.tx += len; - - /* TX FIFO will no longer be empty */ - s->tx_fifo_empty = 0; - - i = 0; - if (s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT) { - /* First disable TX empty interrupt */ - pr_debug("Disabling TE INT\n"); - buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); - s->irqen_reg &= ~MAX3107_IRQ_TXEMPTY_BIT; - buf[i] |= s->irqen_reg; - i++; - len++; - } - /* Add data to send */ - spin_lock_irqsave(&s->port.lock, flags); - for ( ; i < len ; i++) { - buf[i] = (MAX3107_WRITE_BIT | MAX3107_THR_REG); - buf[i] |= ((u16)xmit->buf[xmit->tail] & - MAX3107_SPI_TX_DATA_MASK); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - } - spin_unlock_irqrestore(&s->port.lock, flags); - if (!(s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT)) { - /* Enable TX empty interrupt */ - pr_debug("Enabling TE INT\n"); - buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); - s->irqen_reg |= MAX3107_IRQ_TXEMPTY_BIT; - buf[i] |= s->irqen_reg; - i++; - len++; - } - if (!s->tx_enabled) { - /* Enable TX */ - pr_debug("Enable TX\n"); - buf[i] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); - spin_lock_irqsave(&s->data_lock, flags); - s->mode1_reg &= ~MAX3107_MODE1_TXDIS_BIT; - buf[i] |= s->mode1_reg; - spin_unlock_irqrestore(&s->data_lock, flags); - s->tx_enabled = 1; - i++; - len++; - } - - /* Perform the SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, len*2)) { - dev_err(&s->spi->dev, - "SPI transfer TX handling failed\n"); - return; - } - } - - /* Indicate wake up if circular buffer is getting low on data */ - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&s->port); - -} - -/* Handle interrupts - * Also reads and returns current RX FIFO level - */ -static u16 handle_interrupt(struct max3107_port *s) -{ - u16 buf[4]; /* Buffer for SPI transfers */ - u8 irq_status; - u16 rx_level; - unsigned long flags; - - /* Read IRQ status register */ - buf[0] = MAX3107_IRQSTS_REG; - /* Read status IRQ status register */ - buf[1] = MAX3107_STS_IRQSTS_REG; - /* Read LSR IRQ status register */ - buf[2] = MAX3107_LSR_IRQSTS_REG; - /* Query RX level */ - buf[3] = MAX3107_RXFIFOLVL_REG; - - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 8)) { - dev_err(&s->spi->dev, - "SPI transfer for INTR handling failed\n"); - return 0; - } - - irq_status = (u8)buf[0]; - pr_debug("IRQSTS %x\n", irq_status); - rx_level = (buf[3] & MAX3107_SPI_RX_DATA_MASK); - - if (irq_status & MAX3107_IRQ_LSR_BIT) { - /* LSR interrupt */ - if (buf[2] & MAX3107_LSR_RXTO_BIT) - /* RX timeout interrupt, - * handled by normal RX handling - */ - pr_debug("RX TO INT\n"); - } - - if (irq_status & MAX3107_IRQ_TXEMPTY_BIT) { - /* Tx empty interrupt, - * disable TX and set tx_fifo_empty flag - */ - pr_debug("TE INT, disabling TX\n"); - buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); - spin_lock_irqsave(&s->data_lock, flags); - s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT; - buf[0] |= s->mode1_reg; - spin_unlock_irqrestore(&s->data_lock, flags); - if (max3107_rw(s, (u8 *)buf, NULL, 2)) - dev_err(&s->spi->dev, "SPI transfer TX dis failed\n"); - s->tx_enabled = 0; - s->tx_fifo_empty = 1; - } - - if (irq_status & MAX3107_IRQ_RXFIFO_BIT) - /* RX FIFO interrupt, - * handled by normal RX handling - */ - pr_debug("RFIFO INT\n"); - - /* Return RX level */ - return rx_level; -} - -/* Trigger work thread*/ -static void max3107_dowork(struct max3107_port *s) -{ - if (!work_pending(&s->work) && !freezing(current) && !s->suspended) - queue_work(s->workqueue, &s->work); - else - dev_warn(&s->spi->dev, "interrup isn't serviced normally!\n"); -} - -/* Work thread */ -static void max3107_work(struct work_struct *w) -{ - struct max3107_port *s = container_of(w, struct max3107_port, work); - u16 rxlvl = 0; - int len; /* SPI transfer buffer length */ - u16 buf[5]; /* Buffer for SPI transfers */ - unsigned long flags; - - /* Start by reading current RX FIFO level */ - buf[0] = MAX3107_RXFIFOLVL_REG; - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer RX lev failed\n"); - rxlvl = 0; - } else { - rxlvl = (buf[0] & MAX3107_SPI_RX_DATA_MASK); - } - - do { - pr_debug("rxlvl %d\n", rxlvl); - - /* Handle RX */ - max3107_handlerx(s, rxlvl); - rxlvl = 0; - - if (s->handle_irq) { - /* Handle pending interrupts - * We also get new RX FIFO level since new data may - * have been received while pushing received data to - * receivers - */ - s->handle_irq = 0; - rxlvl = handle_interrupt(s); - } - - /* Handle TX */ - max3107_handletx(s); - - /* Handle configuration changes */ - len = 0; - spin_lock_irqsave(&s->data_lock, flags); - if (s->mode1_commit) { - pr_debug("mode1_commit\n"); - buf[len] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); - buf[len++] |= s->mode1_reg; - s->mode1_commit = 0; - } - if (s->lcr_commit) { - pr_debug("lcr_commit\n"); - buf[len] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG); - buf[len++] |= s->lcr_reg; - s->lcr_commit = 0; - } - if (s->brg_commit) { - pr_debug("brg_commit\n"); - buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG); - buf[len++] |= ((s->brg_cfg >> 16) & - MAX3107_SPI_TX_DATA_MASK); - buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG); - buf[len++] |= ((s->brg_cfg >> 8) & - MAX3107_SPI_TX_DATA_MASK); - buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG); - buf[len++] |= ((s->brg_cfg) & 0xff); - s->brg_commit = 0; - } - spin_unlock_irqrestore(&s->data_lock, flags); - - if (len > 0) { - if (max3107_rw(s, (u8 *)buf, NULL, len * 2)) - dev_err(&s->spi->dev, - "SPI transfer config failed\n"); - } - - /* Reloop if interrupt handling indicated data in RX FIFO */ - } while (rxlvl); - -} - -/* Set sleep mode */ -static void max3107_set_sleep(struct max3107_port *s, int mode) -{ - u16 buf[1]; /* Buffer for SPI transfer */ - unsigned long flags; - pr_debug("enter, mode %d\n", mode); - - buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); - spin_lock_irqsave(&s->data_lock, flags); - switch (mode) { - case MAX3107_DISABLE_FORCED_SLEEP: - s->mode1_reg &= ~MAX3107_MODE1_FORCESLEEP_BIT; - break; - case MAX3107_ENABLE_FORCED_SLEEP: - s->mode1_reg |= MAX3107_MODE1_FORCESLEEP_BIT; - break; - case MAX3107_DISABLE_AUTOSLEEP: - s->mode1_reg &= ~MAX3107_MODE1_AUTOSLEEP_BIT; - break; - case MAX3107_ENABLE_AUTOSLEEP: - s->mode1_reg |= MAX3107_MODE1_AUTOSLEEP_BIT; - break; - default: - spin_unlock_irqrestore(&s->data_lock, flags); - dev_warn(&s->spi->dev, "invalid sleep mode\n"); - return; - } - buf[0] |= s->mode1_reg; - spin_unlock_irqrestore(&s->data_lock, flags); - - if (max3107_rw(s, (u8 *)buf, NULL, 2)) - dev_err(&s->spi->dev, "SPI transfer sleep mode failed\n"); - - if (mode == MAX3107_DISABLE_AUTOSLEEP || - mode == MAX3107_DISABLE_FORCED_SLEEP) - msleep(MAX3107_WAKEUP_DELAY); -} - -/* Perform full register initialization */ -static void max3107_register_init(struct max3107_port *s) -{ - u16 buf[11]; /* Buffer for SPI transfers */ - - /* 1. Configure baud rate, 9600 as default */ - s->baud = 9600; - /* the below is default*/ - if (s->ext_clk) { - s->brg_cfg = MAX3107_BRG26_B9600; - s->baud_tbl = (struct baud_table *)brg26_ext; - } else { - s->brg_cfg = MAX3107_BRG13_IB9600; - s->baud_tbl = (struct baud_table *)brg13_int; - } - - if (s->pdata->init) - s->pdata->init(s); - - buf[0] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG) - | ((s->brg_cfg >> 16) & MAX3107_SPI_TX_DATA_MASK); - buf[1] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG) - | ((s->brg_cfg >> 8) & MAX3107_SPI_TX_DATA_MASK); - buf[2] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG) - | ((s->brg_cfg) & 0xff); - - /* 2. Configure LCR register, 8N1 mode by default */ - s->lcr_reg = MAX3107_LCR_WORD_LEN_8; - buf[3] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG) - | s->lcr_reg; - - /* 3. Configure MODE 1 register */ - s->mode1_reg = 0; - /* Enable IRQ pin */ - s->mode1_reg |= MAX3107_MODE1_IRQSEL_BIT; - /* Disable TX */ - s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT; - s->tx_enabled = 0; - /* RX is enabled */ - s->rx_enabled = 1; - buf[4] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG) - | s->mode1_reg; - - /* 4. Configure MODE 2 register */ - buf[5] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG); - if (s->loopback) { - /* Enable loopback */ - buf[5] |= MAX3107_MODE2_LOOPBACK_BIT; - } - /* Reset FIFOs */ - buf[5] |= MAX3107_MODE2_FIFORST_BIT; - s->tx_fifo_empty = 1; - - /* 5. Configure FIFO trigger level register */ - buf[6] = (MAX3107_WRITE_BIT | MAX3107_FIFOTRIGLVL_REG); - /* RX FIFO trigger for 16 words, TX FIFO trigger not used */ - buf[6] |= (MAX3107_FIFOTRIGLVL_RX(16) | MAX3107_FIFOTRIGLVL_TX(0)); - - /* 6. Configure flow control levels */ - buf[7] = (MAX3107_WRITE_BIT | MAX3107_FLOWLVL_REG); - /* Flow control halt level 96, resume level 48 */ - buf[7] |= (MAX3107_FLOWLVL_RES(48) | MAX3107_FLOWLVL_HALT(96)); - - /* 7. Configure flow control */ - buf[8] = (MAX3107_WRITE_BIT | MAX3107_FLOWCTRL_REG); - /* Enable auto CTS and auto RTS flow control */ - buf[8] |= (MAX3107_FLOWCTRL_AUTOCTS_BIT | MAX3107_FLOWCTRL_AUTORTS_BIT); - - /* 8. Configure RX timeout register */ - buf[9] = (MAX3107_WRITE_BIT | MAX3107_RXTO_REG); - /* Timeout after 48 character intervals */ - buf[9] |= 0x0030; - - /* 9. Configure LSR interrupt enable register */ - buf[10] = (MAX3107_WRITE_BIT | MAX3107_LSR_IRQEN_REG); - /* Enable RX timeout interrupt */ - buf[10] |= MAX3107_LSR_RXTO_BIT; - - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 22)) - dev_err(&s->spi->dev, "SPI transfer for init failed\n"); - - /* 10. Clear IRQ status register by reading it */ - buf[0] = MAX3107_IRQSTS_REG; - - /* 11. Configure interrupt enable register */ - /* Enable LSR interrupt */ - s->irqen_reg = MAX3107_IRQ_LSR_BIT; - /* Enable RX FIFO interrupt */ - s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT; - buf[1] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG) - | s->irqen_reg; - - /* 12. Clear FIFO reset that was set in step 6 */ - buf[2] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG); - if (s->loopback) { - /* Keep loopback enabled */ - buf[2] |= MAX3107_MODE2_LOOPBACK_BIT; - } - - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 6)) - dev_err(&s->spi->dev, "SPI transfer for init failed\n"); - -} - -/* IRQ handler */ -static irqreturn_t max3107_irq(int irqno, void *dev_id) -{ - struct max3107_port *s = dev_id; - - if (irqno != s->spi->irq) { - /* Unexpected IRQ */ - return IRQ_NONE; - } - - /* Indicate irq */ - s->handle_irq = 1; - - /* Trigger work thread */ - max3107_dowork(s); - - return IRQ_HANDLED; -} - -/* HW suspension function - * - * Currently autosleep is used to decrease current consumption, alternative - * approach would be to set the chip to reset mode if UART is not being - * used but that would mess the GPIOs - * - */ -void max3107_hw_susp(struct max3107_port *s, int suspend) -{ - pr_debug("enter, suspend %d\n", suspend); - - if (suspend) { - /* Suspend requested, - * enable autosleep to decrease current consumption - */ - s->suspended = 1; - max3107_set_sleep(s, MAX3107_ENABLE_AUTOSLEEP); - } else { - /* Resume requested, - * disable autosleep - */ - s->suspended = 0; - max3107_set_sleep(s, MAX3107_DISABLE_AUTOSLEEP); - } -} -EXPORT_SYMBOL_GPL(max3107_hw_susp); - -/* Modem status IRQ enabling */ -static void max3107_enable_ms(struct uart_port *port) -{ - /* Modem status not supported */ -} - -/* Data send function */ -static void max3107_start_tx(struct uart_port *port) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - - /* Trigger work thread for sending data */ - max3107_dowork(s); -} - -/* Function for checking that there is no pending transfers */ -static unsigned int max3107_tx_empty(struct uart_port *port) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - - pr_debug("returning %d\n", - (s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit))); - return s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit); -} - -/* Function for stopping RX */ -static void max3107_stop_rx(struct uart_port *port) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - unsigned long flags; - - /* Set RX disabled in MODE 1 register */ - spin_lock_irqsave(&s->data_lock, flags); - s->mode1_reg |= MAX3107_MODE1_RXDIS_BIT; - s->mode1_commit = 1; - spin_unlock_irqrestore(&s->data_lock, flags); - /* Set RX disabled */ - s->rx_enabled = 0; - /* Trigger work thread for doing the actual configuration change */ - max3107_dowork(s); -} - -/* Function for returning control pin states */ -static unsigned int max3107_get_mctrl(struct uart_port *port) -{ - /* DCD and DSR are not wired and CTS/RTS is handled automatically - * so just indicate DSR and CAR asserted - */ - return TIOCM_DSR | TIOCM_CAR; -} - -/* Function for setting control pin states */ -static void max3107_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - /* DCD and DSR are not wired and CTS/RTS is hadnled automatically - * so do nothing - */ -} - -/* Function for configuring UART parameters */ -static void max3107_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - struct tty_struct *tty; - int baud; - u16 new_lcr = 0; - u32 new_brg = 0; - unsigned long flags; - - if (!port->state) - return; - - tty = port->state->port.tty; - if (!tty) - return; - - /* Get new LCR register values */ - /* Word size */ - if ((termios->c_cflag & CSIZE) == CS7) - new_lcr |= MAX3107_LCR_WORD_LEN_7; - else - new_lcr |= MAX3107_LCR_WORD_LEN_8; - - /* Parity */ - if (termios->c_cflag & PARENB) { - new_lcr |= MAX3107_LCR_PARITY_BIT; - if (!(termios->c_cflag & PARODD)) - new_lcr |= MAX3107_LCR_EVENPARITY_BIT; - } - - /* Stop bits */ - if (termios->c_cflag & CSTOPB) { - /* 2 stop bits */ - new_lcr |= MAX3107_LCR_STOPLEN_BIT; - } - - /* Mask termios capabilities we don't support */ - termios->c_cflag &= ~CMSPAR; - - /* Set status ignore mask */ - s->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - s->port.ignore_status_mask |= MAX3107_ALL_ERRORS; - - /* Set low latency to immediately handle pushed data */ - s->port.state->port.tty->low_latency = 1; - - /* Get new baud rate generator configuration */ - baud = tty_get_baud_rate(tty); - - spin_lock_irqsave(&s->data_lock, flags); - new_brg = get_new_brg(baud, s); - /* if can't find the corrent config, use previous */ - if (!new_brg) { - baud = s->baud; - new_brg = s->brg_cfg; - } - spin_unlock_irqrestore(&s->data_lock, flags); - tty_termios_encode_baud_rate(termios, baud, baud); - s->baud = baud; - - /* Update timeout according to new baud rate */ - uart_update_timeout(port, termios->c_cflag, baud); - - spin_lock_irqsave(&s->data_lock, flags); - if (s->lcr_reg != new_lcr) { - s->lcr_reg = new_lcr; - s->lcr_commit = 1; - } - if (s->brg_cfg != new_brg) { - s->brg_cfg = new_brg; - s->brg_commit = 1; - } - spin_unlock_irqrestore(&s->data_lock, flags); - - /* Trigger work thread for doing the actual configuration change */ - max3107_dowork(s); -} - -/* Port shutdown function */ -static void max3107_shutdown(struct uart_port *port) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - - if (s->suspended && s->pdata->hw_suspend) - s->pdata->hw_suspend(s, 0); - - /* Free the interrupt */ - free_irq(s->spi->irq, s); - - if (s->workqueue) { - /* Flush and destroy work queue */ - flush_workqueue(s->workqueue); - destroy_workqueue(s->workqueue); - s->workqueue = NULL; - } - - /* Suspend HW */ - if (s->pdata->hw_suspend) - s->pdata->hw_suspend(s, 1); -} - -/* Port startup function */ -static int max3107_startup(struct uart_port *port) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - - /* Initialize work queue */ - s->workqueue = create_freezable_workqueue("max3107"); - if (!s->workqueue) { - dev_err(&s->spi->dev, "Workqueue creation failed\n"); - return -EBUSY; - } - INIT_WORK(&s->work, max3107_work); - - /* Setup IRQ */ - if (request_irq(s->spi->irq, max3107_irq, IRQF_TRIGGER_FALLING, - "max3107", s)) { - dev_err(&s->spi->dev, "IRQ reguest failed\n"); - destroy_workqueue(s->workqueue); - s->workqueue = NULL; - return -EBUSY; - } - - /* Resume HW */ - if (s->pdata->hw_suspend) - s->pdata->hw_suspend(s, 0); - - /* Init registers */ - max3107_register_init(s); - - return 0; -} - -/* Port type function */ -static const char *max3107_type(struct uart_port *port) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - return s->spi->modalias; -} - -/* Port release function */ -static void max3107_release_port(struct uart_port *port) -{ - /* Do nothing */ -} - -/* Port request function */ -static int max3107_request_port(struct uart_port *port) -{ - /* Do nothing */ - return 0; -} - -/* Port config function */ -static void max3107_config_port(struct uart_port *port, int flags) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - s->port.type = PORT_MAX3107; -} - -/* Port verify function */ -static int max3107_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3107) - return 0; - - return -EINVAL; -} - -/* Port stop TX function */ -static void max3107_stop_tx(struct uart_port *port) -{ - /* Do nothing */ -} - -/* Port break control function */ -static void max3107_break_ctl(struct uart_port *port, int break_state) -{ - /* We don't support break control, do nothing */ -} - - -/* Port functions */ -static struct uart_ops max3107_ops = { - .tx_empty = max3107_tx_empty, - .set_mctrl = max3107_set_mctrl, - .get_mctrl = max3107_get_mctrl, - .stop_tx = max3107_stop_tx, - .start_tx = max3107_start_tx, - .stop_rx = max3107_stop_rx, - .enable_ms = max3107_enable_ms, - .break_ctl = max3107_break_ctl, - .startup = max3107_startup, - .shutdown = max3107_shutdown, - .set_termios = max3107_set_termios, - .type = max3107_type, - .release_port = max3107_release_port, - .request_port = max3107_request_port, - .config_port = max3107_config_port, - .verify_port = max3107_verify_port, -}; - -/* UART driver data */ -static struct uart_driver max3107_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "ttyMAX", - .dev_name = "ttyMAX", - .nr = 1, -}; - -static int driver_registered = 0; - - - -/* 'Generic' platform data */ -static struct max3107_plat generic_plat_data = { - .loopback = 0, - .ext_clk = 1, - .hw_suspend = max3107_hw_susp, - .polled_mode = 0, - .poll_time = 0, -}; - - -/*******************************************************************/ - -/** - * max3107_probe - SPI bus probe entry point - * @spi: the spi device - * - * SPI wants us to probe this device and if appropriate claim it. - * Perform any platform specific requirements and then initialise - * the device. - */ - -int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata) -{ - struct max3107_port *s; - u16 buf[2]; /* Buffer for SPI transfers */ - int retval; - - pr_info("enter max3107 probe\n"); - - /* Allocate port structure */ - s = kzalloc(sizeof(*s), GFP_KERNEL); - if (!s) { - pr_err("Allocating port structure failed\n"); - return -ENOMEM; - } - - s->pdata = pdata; - - /* SPI Rx buffer - * +2 for RX FIFO interrupt - * disabling and RX level query - */ - s->rxbuf = kzalloc(sizeof(u16) * (MAX3107_RX_FIFO_SIZE+2), GFP_KERNEL); - if (!s->rxbuf) { - pr_err("Allocating RX buffer failed\n"); - retval = -ENOMEM; - goto err_free4; - } - s->rxstr = kzalloc(sizeof(u8) * MAX3107_RX_FIFO_SIZE, GFP_KERNEL); - if (!s->rxstr) { - pr_err("Allocating RX buffer failed\n"); - retval = -ENOMEM; - goto err_free3; - } - /* SPI Tx buffer - * SPI transfer buffer - * +3 for TX FIFO empty - * interrupt disabling and - * enabling and TX enabling - */ - s->txbuf = kzalloc(sizeof(u16) * MAX3107_TX_FIFO_SIZE + 3, GFP_KERNEL); - if (!s->txbuf) { - pr_err("Allocating TX buffer failed\n"); - retval = -ENOMEM; - goto err_free2; - } - /* Initialize shared data lock */ - spin_lock_init(&s->data_lock); - - /* SPI intializations */ - dev_set_drvdata(&spi->dev, s); - spi->mode = SPI_MODE_0; - spi->dev.platform_data = pdata; - spi->bits_per_word = 16; - s->ext_clk = pdata->ext_clk; - s->loopback = pdata->loopback; - spi_setup(spi); - s->spi = spi; - - /* Check REV ID to ensure we are talking to what we expect */ - buf[0] = MAX3107_REVID_REG; - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer for REVID read failed\n"); - retval = -EIO; - goto err_free1; - } - if ((buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID1 && - (buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID2) { - dev_err(&s->spi->dev, "REVID %x does not match\n", - (buf[0] & MAX3107_SPI_RX_DATA_MASK)); - retval = -ENODEV; - goto err_free1; - } - - /* Disable all interrupts */ - buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG | 0x0000); - buf[0] |= 0x0000; - - /* Configure clock source */ - buf[1] = (MAX3107_WRITE_BIT | MAX3107_CLKSRC_REG); - if (s->ext_clk) { - /* External clock */ - buf[1] |= MAX3107_CLKSRC_EXTCLK_BIT; - } - - /* PLL bypass ON */ - buf[1] |= MAX3107_CLKSRC_PLLBYP_BIT; - - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 4)) { - dev_err(&s->spi->dev, "SPI transfer for init failed\n"); - retval = -EIO; - goto err_free1; - } - - /* Register UART driver */ - if (!driver_registered) { - retval = uart_register_driver(&max3107_uart_driver); - if (retval) { - dev_err(&s->spi->dev, "Registering UART driver failed\n"); - goto err_free1; - } - driver_registered = 1; - } - - /* Initialize UART port data */ - s->port.fifosize = 128; - s->port.ops = &max3107_ops; - s->port.line = 0; - s->port.dev = &spi->dev; - s->port.uartclk = 9600; - s->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; - s->port.irq = s->spi->irq; - s->port.type = PORT_MAX3107; - - /* Add UART port */ - retval = uart_add_one_port(&max3107_uart_driver, &s->port); - if (retval < 0) { - dev_err(&s->spi->dev, "Adding UART port failed\n"); - goto err_free1; - } - - if (pdata->configure) { - retval = pdata->configure(s); - if (retval < 0) - goto err_free1; - } - - /* Go to suspend mode */ - if (pdata->hw_suspend) - pdata->hw_suspend(s, 1); - - return 0; - -err_free1: - kfree(s->txbuf); -err_free2: - kfree(s->rxstr); -err_free3: - kfree(s->rxbuf); -err_free4: - kfree(s); - return retval; -} -EXPORT_SYMBOL_GPL(max3107_probe); - -/* Driver remove function */ -int max3107_remove(struct spi_device *spi) -{ - struct max3107_port *s = dev_get_drvdata(&spi->dev); - - pr_info("enter max3107 remove\n"); - - /* Remove port */ - if (uart_remove_one_port(&max3107_uart_driver, &s->port)) - dev_warn(&s->spi->dev, "Removing UART port failed\n"); - - - /* Free TxRx buffer */ - kfree(s->rxbuf); - kfree(s->rxstr); - kfree(s->txbuf); - - /* Free port structure */ - kfree(s); - - return 0; -} -EXPORT_SYMBOL_GPL(max3107_remove); - -/* Driver suspend function */ -int max3107_suspend(struct spi_device *spi, pm_message_t state) -{ -#ifdef CONFIG_PM - struct max3107_port *s = dev_get_drvdata(&spi->dev); - - pr_debug("enter suspend\n"); - - /* Suspend UART port */ - uart_suspend_port(&max3107_uart_driver, &s->port); - - /* Go to suspend mode */ - if (s->pdata->hw_suspend) - s->pdata->hw_suspend(s, 1); -#endif /* CONFIG_PM */ - return 0; -} -EXPORT_SYMBOL_GPL(max3107_suspend); - -/* Driver resume function */ -int max3107_resume(struct spi_device *spi) -{ -#ifdef CONFIG_PM - struct max3107_port *s = dev_get_drvdata(&spi->dev); - - pr_debug("enter resume\n"); - - /* Resume from suspend */ - if (s->pdata->hw_suspend) - s->pdata->hw_suspend(s, 0); - - /* Resume UART port */ - uart_resume_port(&max3107_uart_driver, &s->port); -#endif /* CONFIG_PM */ - return 0; -} -EXPORT_SYMBOL_GPL(max3107_resume); - -static int max3107_probe_generic(struct spi_device *spi) -{ - return max3107_probe(spi, &generic_plat_data); -} - -/* Spi driver data */ -static struct spi_driver max3107_driver = { - .driver = { - .name = "max3107", - .owner = THIS_MODULE, - }, - .probe = max3107_probe_generic, - .remove = __devexit_p(max3107_remove), - .suspend = max3107_suspend, - .resume = max3107_resume, -}; - -/* Driver init function */ -static int __init max3107_init(void) -{ - pr_info("enter max3107 init\n"); - return spi_register_driver(&max3107_driver); -} - -/* Driver exit function */ -static void __exit max3107_exit(void) -{ - pr_info("enter max3107 exit\n"); - /* Unregister UART driver */ - if (driver_registered) - uart_unregister_driver(&max3107_uart_driver); - spi_unregister_driver(&max3107_driver); -} - -module_init(max3107_init); -module_exit(max3107_exit); - -MODULE_DESCRIPTION("MAX3107 driver"); -MODULE_AUTHOR("Aavamobile"); -MODULE_ALIAS("spi:max3107"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/max3107.h b/drivers/tty/serial/max3107.h deleted file mode 100644 index 8415fc723b96..000000000000 --- a/drivers/tty/serial/max3107.h +++ /dev/null @@ -1,441 +0,0 @@ -/* - * max3107.h - spi uart protocol driver header for Maxim 3107 - * - * Copyright (C) Aavamobile 2009 - * Based on serial_max3100.h by Christian Pellegrin - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef _MAX3107_H -#define _MAX3107_H - -/* Serial error status definitions */ -#define MAX3107_PARITY_ERROR 1 -#define MAX3107_FRAME_ERROR 2 -#define MAX3107_OVERRUN_ERROR 4 -#define MAX3107_ALL_ERRORS (MAX3107_PARITY_ERROR | \ - MAX3107_FRAME_ERROR | \ - MAX3107_OVERRUN_ERROR) - -/* GPIO definitions */ -#define MAX3107_GPIO_BASE 88 -#define MAX3107_GPIO_COUNT 4 - - -/* GPIO connected to chip's reset pin */ -#define MAX3107_RESET_GPIO 87 - - -/* Chip reset delay */ -#define MAX3107_RESET_DELAY 10 - -/* Chip wakeup delay */ -#define MAX3107_WAKEUP_DELAY 50 - - -/* Sleep mode definitions */ -#define MAX3107_DISABLE_FORCED_SLEEP 0 -#define MAX3107_ENABLE_FORCED_SLEEP 1 -#define MAX3107_DISABLE_AUTOSLEEP 2 -#define MAX3107_ENABLE_AUTOSLEEP 3 - - -/* Definitions for register access with SPI transfers - * - * SPI transfer format: - * - * Master to slave bits xzzzzzzzyyyyyyyy - * Slave to master bits aaaaaaaabbbbbbbb - * - * where: - * x = 0 for reads, 1 for writes - * z = register address - * y = new register value if write, 0 if read - * a = unspecified - * b = register value if read, unspecified if write - */ - -/* SPI speed */ -#define MAX3107_SPI_SPEED (3125000 * 2) - -/* Write bit */ -#define MAX3107_WRITE_BIT (1 << 15) - -/* SPI TX data mask */ -#define MAX3107_SPI_RX_DATA_MASK (0x00ff) - -/* SPI RX data mask */ -#define MAX3107_SPI_TX_DATA_MASK (0x00ff) - -/* Register access masks */ -#define MAX3107_RHR_REG (0x0000) /* RX FIFO */ -#define MAX3107_THR_REG (0x0000) /* TX FIFO */ -#define MAX3107_IRQEN_REG (0x0100) /* IRQ enable */ -#define MAX3107_IRQSTS_REG (0x0200) /* IRQ status */ -#define MAX3107_LSR_IRQEN_REG (0x0300) /* LSR IRQ enable */ -#define MAX3107_LSR_IRQSTS_REG (0x0400) /* LSR IRQ status */ -#define MAX3107_SPCHR_IRQEN_REG (0x0500) /* Special char IRQ enable */ -#define MAX3107_SPCHR_IRQSTS_REG (0x0600) /* Special char IRQ status */ -#define MAX3107_STS_IRQEN_REG (0x0700) /* Status IRQ enable */ -#define MAX3107_STS_IRQSTS_REG (0x0800) /* Status IRQ status */ -#define MAX3107_MODE1_REG (0x0900) /* MODE1 */ -#define MAX3107_MODE2_REG (0x0a00) /* MODE2 */ -#define MAX3107_LCR_REG (0x0b00) /* LCR */ -#define MAX3107_RXTO_REG (0x0c00) /* RX timeout */ -#define MAX3107_HDPIXDELAY_REG (0x0d00) /* Auto transceiver delays */ -#define MAX3107_IRDA_REG (0x0e00) /* IRDA settings */ -#define MAX3107_FLOWLVL_REG (0x0f00) /* Flow control levels */ -#define MAX3107_FIFOTRIGLVL_REG (0x1000) /* FIFO IRQ trigger levels */ -#define MAX3107_TXFIFOLVL_REG (0x1100) /* TX FIFO level */ -#define MAX3107_RXFIFOLVL_REG (0x1200) /* RX FIFO level */ -#define MAX3107_FLOWCTRL_REG (0x1300) /* Flow control */ -#define MAX3107_XON1_REG (0x1400) /* XON1 character */ -#define MAX3107_XON2_REG (0x1500) /* XON2 character */ -#define MAX3107_XOFF1_REG (0x1600) /* XOFF1 character */ -#define MAX3107_XOFF2_REG (0x1700) /* XOFF2 character */ -#define MAX3107_GPIOCFG_REG (0x1800) /* GPIO config */ -#define MAX3107_GPIODATA_REG (0x1900) /* GPIO data */ -#define MAX3107_PLLCFG_REG (0x1a00) /* PLL config */ -#define MAX3107_BRGCFG_REG (0x1b00) /* Baud rate generator conf */ -#define MAX3107_BRGDIVLSB_REG (0x1c00) /* Baud rate divisor LSB */ -#define MAX3107_BRGDIVMSB_REG (0x1d00) /* Baud rate divisor MSB */ -#define MAX3107_CLKSRC_REG (0x1e00) /* Clock source */ -#define MAX3107_REVID_REG (0x1f00) /* Revision identification */ - -/* IRQ register bits */ -#define MAX3107_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */ -#define MAX3107_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */ -#define MAX3107_IRQ_STS_BIT (1 << 2) /* Status interrupt */ -#define MAX3107_IRQ_RXFIFO_BIT (1 << 3) /* RX FIFO interrupt */ -#define MAX3107_IRQ_TXFIFO_BIT (1 << 4) /* TX FIFO interrupt */ -#define MAX3107_IRQ_TXEMPTY_BIT (1 << 5) /* TX FIFO empty interrupt */ -#define MAX3107_IRQ_RXEMPTY_BIT (1 << 6) /* RX FIFO empty interrupt */ -#define MAX3107_IRQ_CTS_BIT (1 << 7) /* CTS interrupt */ - -/* LSR register bits */ -#define MAX3107_LSR_RXTO_BIT (1 << 0) /* RX timeout */ -#define MAX3107_LSR_RXOVR_BIT (1 << 1) /* RX overrun */ -#define MAX3107_LSR_RXPAR_BIT (1 << 2) /* RX parity error */ -#define MAX3107_LSR_FRERR_BIT (1 << 3) /* Frame error */ -#define MAX3107_LSR_RXBRK_BIT (1 << 4) /* RX break */ -#define MAX3107_LSR_RXNOISE_BIT (1 << 5) /* RX noise */ -#define MAX3107_LSR_UNDEF6_BIT (1 << 6) /* Undefined/not used */ -#define MAX3107_LSR_CTS_BIT (1 << 7) /* CTS pin state */ - -/* Special character register bits */ -#define MAX3107_SPCHR_XON1_BIT (1 << 0) /* XON1 character */ -#define MAX3107_SPCHR_XON2_BIT (1 << 1) /* XON2 character */ -#define MAX3107_SPCHR_XOFF1_BIT (1 << 2) /* XOFF1 character */ -#define MAX3107_SPCHR_XOFF2_BIT (1 << 3) /* XOFF2 character */ -#define MAX3107_SPCHR_BREAK_BIT (1 << 4) /* RX break */ -#define MAX3107_SPCHR_MULTIDROP_BIT (1 << 5) /* 9-bit multidrop addr char */ -#define MAX3107_SPCHR_UNDEF6_BIT (1 << 6) /* Undefined/not used */ -#define MAX3107_SPCHR_UNDEF7_BIT (1 << 7) /* Undefined/not used */ - -/* Status register bits */ -#define MAX3107_STS_GPIO0_BIT (1 << 0) /* GPIO 0 interrupt */ -#define MAX3107_STS_GPIO1_BIT (1 << 1) /* GPIO 1 interrupt */ -#define MAX3107_STS_GPIO2_BIT (1 << 2) /* GPIO 2 interrupt */ -#define MAX3107_STS_GPIO3_BIT (1 << 3) /* GPIO 3 interrupt */ -#define MAX3107_STS_UNDEF4_BIT (1 << 4) /* Undefined/not used */ -#define MAX3107_STS_CLKREADY_BIT (1 << 5) /* Clock ready */ -#define MAX3107_STS_SLEEP_BIT (1 << 6) /* Sleep interrupt */ -#define MAX3107_STS_UNDEF7_BIT (1 << 7) /* Undefined/not used */ - -/* MODE1 register bits */ -#define MAX3107_MODE1_RXDIS_BIT (1 << 0) /* RX disable */ -#define MAX3107_MODE1_TXDIS_BIT (1 << 1) /* TX disable */ -#define MAX3107_MODE1_TXHIZ_BIT (1 << 2) /* TX pin three-state */ -#define MAX3107_MODE1_RTSHIZ_BIT (1 << 3) /* RTS pin three-state */ -#define MAX3107_MODE1_TRNSCVCTRL_BIT (1 << 4) /* Transceiver ctrl enable */ -#define MAX3107_MODE1_FORCESLEEP_BIT (1 << 5) /* Force sleep mode */ -#define MAX3107_MODE1_AUTOSLEEP_BIT (1 << 6) /* Auto sleep enable */ -#define MAX3107_MODE1_IRQSEL_BIT (1 << 7) /* IRQ pin enable */ - -/* MODE2 register bits */ -#define MAX3107_MODE2_RST_BIT (1 << 0) /* Chip reset */ -#define MAX3107_MODE2_FIFORST_BIT (1 << 1) /* FIFO reset */ -#define MAX3107_MODE2_RXTRIGINV_BIT (1 << 2) /* RX FIFO INT invert */ -#define MAX3107_MODE2_RXEMPTINV_BIT (1 << 3) /* RX FIFO empty INT invert */ -#define MAX3107_MODE2_SPCHR_BIT (1 << 4) /* Special chr detect enable */ -#define MAX3107_MODE2_LOOPBACK_BIT (1 << 5) /* Internal loopback enable */ -#define MAX3107_MODE2_MULTIDROP_BIT (1 << 6) /* 9-bit multidrop enable */ -#define MAX3107_MODE2_ECHOSUPR_BIT (1 << 7) /* ECHO suppression enable */ - -/* LCR register bits */ -#define MAX3107_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */ -#define MAX3107_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1 - * - * Word length bits table: - * 00 -> 5 bit words - * 01 -> 6 bit words - * 10 -> 7 bit words - * 11 -> 8 bit words - */ -#define MAX3107_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit - * - * STOP length bit table: - * 0 -> 1 stop bit - * 1 -> 1-1.5 stop bits if - * word length is 5, - * 2 stop bits otherwise - */ -#define MAX3107_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */ -#define MAX3107_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */ -#define MAX3107_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */ -#define MAX3107_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */ -#define MAX3107_LCR_RTS_BIT (1 << 7) /* RTS pin control */ -#define MAX3107_LCR_WORD_LEN_5 (0x0000) -#define MAX3107_LCR_WORD_LEN_6 (0x0001) -#define MAX3107_LCR_WORD_LEN_7 (0x0002) -#define MAX3107_LCR_WORD_LEN_8 (0x0003) - - -/* IRDA register bits */ -#define MAX3107_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */ -#define MAX3107_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */ -#define MAX3107_IRDA_SHORTIR_BIT (1 << 2) /* Short SIR mode enable */ -#define MAX3107_IRDA_MIR_BIT (1 << 3) /* MIR mode enable */ -#define MAX3107_IRDA_RXINV_BIT (1 << 4) /* RX logic inversion enable */ -#define MAX3107_IRDA_TXINV_BIT (1 << 5) /* TX logic inversion enable */ -#define MAX3107_IRDA_UNDEF6_BIT (1 << 6) /* Undefined/not used */ -#define MAX3107_IRDA_UNDEF7_BIT (1 << 7) /* Undefined/not used */ - -/* Flow control trigger level register masks */ -#define MAX3107_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */ -#define MAX3107_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */ -#define MAX3107_FLOWLVL_HALT(words) ((words/8) & 0x000f) -#define MAX3107_FLOWLVL_RES(words) (((words/8) & 0x000f) << 4) - -/* FIFO interrupt trigger level register masks */ -#define MAX3107_FIFOTRIGLVL_TX_MASK (0x000f) /* TX FIFO trigger level */ -#define MAX3107_FIFOTRIGLVL_RX_MASK (0x00f0) /* RX FIFO trigger level */ -#define MAX3107_FIFOTRIGLVL_TX(words) ((words/8) & 0x000f) -#define MAX3107_FIFOTRIGLVL_RX(words) (((words/8) & 0x000f) << 4) - -/* Flow control register bits */ -#define MAX3107_FLOWCTRL_AUTORTS_BIT (1 << 0) /* Auto RTS flow ctrl enable */ -#define MAX3107_FLOWCTRL_AUTOCTS_BIT (1 << 1) /* Auto CTS flow ctrl enable */ -#define MAX3107_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs - * are used in conjunction with - * XOFF2 for definition of - * special character */ -#define MAX3107_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */ -#define MAX3107_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */ -#define MAX3107_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1 - * - * SWFLOW bits 1 & 0 table: - * 00 -> no transmitter flow - * control - * 01 -> receiver compares - * XON2 and XOFF2 - * and controls - * transmitter - * 10 -> receiver compares - * XON1 and XOFF1 - * and controls - * transmitter - * 11 -> receiver compares - * XON1, XON2, XOFF1 and - * XOFF2 and controls - * transmitter - */ -#define MAX3107_FLOWCTRL_SWFLOW2_BIT (1 << 6) /* SWFLOW bit 2 */ -#define MAX3107_FLOWCTRL_SWFLOW3_BIT (1 << 7) /* SWFLOW bit 3 - * - * SWFLOW bits 3 & 2 table: - * 00 -> no received flow - * control - * 01 -> transmitter generates - * XON2 and XOFF2 - * 10 -> transmitter generates - * XON1 and XOFF1 - * 11 -> transmitter generates - * XON1, XON2, XOFF1 and - * XOFF2 - */ - -/* GPIO configuration register bits */ -#define MAX3107_GPIOCFG_GP0OUT_BIT (1 << 0) /* GPIO 0 output enable */ -#define MAX3107_GPIOCFG_GP1OUT_BIT (1 << 1) /* GPIO 1 output enable */ -#define MAX3107_GPIOCFG_GP2OUT_BIT (1 << 2) /* GPIO 2 output enable */ -#define MAX3107_GPIOCFG_GP3OUT_BIT (1 << 3) /* GPIO 3 output enable */ -#define MAX3107_GPIOCFG_GP0OD_BIT (1 << 4) /* GPIO 0 open-drain enable */ -#define MAX3107_GPIOCFG_GP1OD_BIT (1 << 5) /* GPIO 1 open-drain enable */ -#define MAX3107_GPIOCFG_GP2OD_BIT (1 << 6) /* GPIO 2 open-drain enable */ -#define MAX3107_GPIOCFG_GP3OD_BIT (1 << 7) /* GPIO 3 open-drain enable */ - -/* GPIO DATA register bits */ -#define MAX3107_GPIODATA_GP0OUT_BIT (1 << 0) /* GPIO 0 output value */ -#define MAX3107_GPIODATA_GP1OUT_BIT (1 << 1) /* GPIO 1 output value */ -#define MAX3107_GPIODATA_GP2OUT_BIT (1 << 2) /* GPIO 2 output value */ -#define MAX3107_GPIODATA_GP3OUT_BIT (1 << 3) /* GPIO 3 output value */ -#define MAX3107_GPIODATA_GP0IN_BIT (1 << 4) /* GPIO 0 input value */ -#define MAX3107_GPIODATA_GP1IN_BIT (1 << 5) /* GPIO 1 input value */ -#define MAX3107_GPIODATA_GP2IN_BIT (1 << 6) /* GPIO 2 input value */ -#define MAX3107_GPIODATA_GP3IN_BIT (1 << 7) /* GPIO 3 input value */ - -/* PLL configuration register masks */ -#define MAX3107_PLLCFG_PREDIV_MASK (0x003f) /* PLL predivision value */ -#define MAX3107_PLLCFG_PLLFACTOR_MASK (0x00c0) /* PLL multiplication factor */ - -/* Baud rate generator configuration register masks and bits */ -#define MAX3107_BRGCFG_FRACT_MASK (0x000f) /* Fractional portion of - * Baud rate generator divisor - */ -#define MAX3107_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */ -#define MAX3107_BRGCFG_4XMODE_BIT (1 << 5) /* Quadruple baud rate */ -#define MAX3107_BRGCFG_UNDEF6_BIT (1 << 6) /* Undefined/not used */ -#define MAX3107_BRGCFG_UNDEF7_BIT (1 << 7) /* Undefined/not used */ - -/* Clock source register bits */ -#define MAX3107_CLKSRC_INTOSC_BIT (1 << 0) /* Internal osc enable */ -#define MAX3107_CLKSRC_CRYST_BIT (1 << 1) /* Crystal osc enable */ -#define MAX3107_CLKSRC_PLL_BIT (1 << 2) /* PLL enable */ -#define MAX3107_CLKSRC_PLLBYP_BIT (1 << 3) /* PLL bypass */ -#define MAX3107_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */ -#define MAX3107_CLKSRC_UNDEF5_BIT (1 << 5) /* Undefined/not used */ -#define MAX3107_CLKSRC_UNDEF6_BIT (1 << 6) /* Undefined/not used */ -#define MAX3107_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */ - - -/* HW definitions */ -#define MAX3107_RX_FIFO_SIZE 128 -#define MAX3107_TX_FIFO_SIZE 128 -#define MAX3107_REVID1 0x00a0 -#define MAX3107_REVID2 0x00a1 - - -/* Baud rate generator configuration values for external clock 13MHz */ -#define MAX3107_BRG13_B300 (0x0A9400 | 0x05) -#define MAX3107_BRG13_B600 (0x054A00 | 0x03) -#define MAX3107_BRG13_B1200 (0x02A500 | 0x01) -#define MAX3107_BRG13_B2400 (0x015200 | 0x09) -#define MAX3107_BRG13_B4800 (0x00A900 | 0x04) -#define MAX3107_BRG13_B9600 (0x005400 | 0x0A) -#define MAX3107_BRG13_B19200 (0x002A00 | 0x05) -#define MAX3107_BRG13_B38400 (0x001500 | 0x03) -#define MAX3107_BRG13_B57600 (0x000E00 | 0x02) -#define MAX3107_BRG13_B115200 (0x000700 | 0x01) -#define MAX3107_BRG13_B230400 (0x000300 | 0x08) -#define MAX3107_BRG13_B460800 (0x000100 | 0x0c) -#define MAX3107_BRG13_B921600 (0x000100 | 0x1c) - -/* Baud rate generator configuration values for external clock 26MHz */ -#define MAX3107_BRG26_B300 (0x152800 | 0x0A) -#define MAX3107_BRG26_B600 (0x0A9400 | 0x05) -#define MAX3107_BRG26_B1200 (0x054A00 | 0x03) -#define MAX3107_BRG26_B2400 (0x02A500 | 0x01) -#define MAX3107_BRG26_B4800 (0x015200 | 0x09) -#define MAX3107_BRG26_B9600 (0x00A900 | 0x04) -#define MAX3107_BRG26_B19200 (0x005400 | 0x0A) -#define MAX3107_BRG26_B38400 (0x002A00 | 0x05) -#define MAX3107_BRG26_B57600 (0x001C00 | 0x03) -#define MAX3107_BRG26_B115200 (0x000E00 | 0x02) -#define MAX3107_BRG26_B230400 (0x000700 | 0x01) -#define MAX3107_BRG26_B460800 (0x000300 | 0x08) -#define MAX3107_BRG26_B921600 (0x000100 | 0x0C) - -/* Baud rate generator configuration values for internal clock */ -#define MAX3107_BRG13_IB300 (0x008000 | 0x00) -#define MAX3107_BRG13_IB600 (0x004000 | 0x00) -#define MAX3107_BRG13_IB1200 (0x002000 | 0x00) -#define MAX3107_BRG13_IB2400 (0x001000 | 0x00) -#define MAX3107_BRG13_IB4800 (0x000800 | 0x00) -#define MAX3107_BRG13_IB9600 (0x000400 | 0x00) -#define MAX3107_BRG13_IB19200 (0x000200 | 0x00) -#define MAX3107_BRG13_IB38400 (0x000100 | 0x00) -#define MAX3107_BRG13_IB57600 (0x000000 | 0x0B) -#define MAX3107_BRG13_IB115200 (0x000000 | 0x05) -#define MAX3107_BRG13_IB230400 (0x000000 | 0x03) -#define MAX3107_BRG13_IB460800 (0x000000 | 0x00) -#define MAX3107_BRG13_IB921600 (0x000000 | 0x00) - - -struct baud_table { - int baud; - u32 new_brg; -}; - -struct max3107_port { - /* UART port structure */ - struct uart_port port; - - /* SPI device structure */ - struct spi_device *spi; - -#if defined(CONFIG_GPIOLIB) - /* GPIO chip structure */ - struct gpio_chip chip; -#endif - - /* Workqueue that does all the magic */ - struct workqueue_struct *workqueue; - struct work_struct work; - - /* Lock for shared data */ - spinlock_t data_lock; - - /* Device configuration */ - int ext_clk; /* 1 if external clock used */ - int loopback; /* Current loopback mode state */ - int baud; /* Current baud rate */ - - /* State flags */ - int suspended; /* Indicates suspend mode */ - int tx_fifo_empty; /* Flag for TX FIFO state */ - int rx_enabled; /* Flag for receiver state */ - int tx_enabled; /* Flag for transmitter state */ - - u16 irqen_reg; /* Current IRQ enable register value */ - /* Shared data */ - u16 mode1_reg; /* Current mode1 register value*/ - int mode1_commit; /* Flag for setting new mode1 register value */ - u16 lcr_reg; /* Current LCR register value */ - int lcr_commit; /* Flag for setting new LCR register value */ - u32 brg_cfg; /* Current Baud rate generator config */ - int brg_commit; /* Flag for setting new baud rate generator - * config - */ - struct baud_table *baud_tbl; - int handle_irq; /* Indicates that IRQ should be handled */ - - /* Rx buffer and str*/ - u16 *rxbuf; - u8 *rxstr; - /* Tx buffer*/ - u16 *txbuf; - - struct max3107_plat *pdata; /* Platform data */ -}; - -/* Platform data structure */ -struct max3107_plat { - /* Loopback mode enable */ - int loopback; - /* External clock enable */ - int ext_clk; - /* Called during the register initialisation */ - void (*init)(struct max3107_port *s); - /* Called when the port is found and configured */ - int (*configure)(struct max3107_port *s); - /* HW suspend function */ - void (*hw_suspend) (struct max3107_port *s, int suspend); - /* Polling mode enable */ - int polled_mode; - /* Polling period if polling mode enabled */ - int poll_time; -}; - -extern int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len); -extern void max3107_hw_susp(struct max3107_port *s, int suspend); -extern int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata); -extern int max3107_remove(struct spi_device *spi); -extern int max3107_suspend(struct spi_device *spi, pm_message_t state); -extern int max3107_resume(struct spi_device *spi); - -#endif /* _LINUX_SERIAL_MAX3107_H */ diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c new file mode 100644 index 000000000000..2bc28a59d385 --- /dev/null +++ b/drivers/tty/serial/max310x.c @@ -0,0 +1,1260 @@ +/* + * Maxim (Dallas) MAX3107/8 serial driver + * + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * + * Based on max3100.c, by Christian Pellegrin <chripell@evolware.org> + * Based on max3110.c, by Feng Tang <feng.tang@intel.com> + * Based on max3107.c, by Aavamobile + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* TODO: MAX3109 support (Dual) */ +/* TODO: MAX14830 support (Quad) */ + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/regmap.h> +#include <linux/gpio.h> +#include <linux/spi/spi.h> +#include <linux/platform_data/max310x.h> + +#define MAX310X_MAJOR 204 +#define MAX310X_MINOR 209 + +/* MAX310X register definitions */ +#define MAX310X_RHR_REG (0x00) /* RX FIFO */ +#define MAX310X_THR_REG (0x00) /* TX FIFO */ +#define MAX310X_IRQEN_REG (0x01) /* IRQ enable */ +#define MAX310X_IRQSTS_REG (0x02) /* IRQ status */ +#define MAX310X_LSR_IRQEN_REG (0x03) /* LSR IRQ enable */ +#define MAX310X_LSR_IRQSTS_REG (0x04) /* LSR IRQ status */ +#define MAX310X_SPCHR_IRQEN_REG (0x05) /* Special char IRQ enable */ +#define MAX310X_SPCHR_IRQSTS_REG (0x06) /* Special char IRQ status */ +#define MAX310X_STS_IRQEN_REG (0x07) /* Status IRQ enable */ +#define MAX310X_STS_IRQSTS_REG (0x08) /* Status IRQ status */ +#define MAX310X_MODE1_REG (0x09) /* MODE1 */ +#define MAX310X_MODE2_REG (0x0a) /* MODE2 */ +#define MAX310X_LCR_REG (0x0b) /* LCR */ +#define MAX310X_RXTO_REG (0x0c) /* RX timeout */ +#define MAX310X_HDPIXDELAY_REG (0x0d) /* Auto transceiver delays */ +#define MAX310X_IRDA_REG (0x0e) /* IRDA settings */ +#define MAX310X_FLOWLVL_REG (0x0f) /* Flow control levels */ +#define MAX310X_FIFOTRIGLVL_REG (0x10) /* FIFO IRQ trigger levels */ +#define MAX310X_TXFIFOLVL_REG (0x11) /* TX FIFO level */ +#define MAX310X_RXFIFOLVL_REG (0x12) /* RX FIFO level */ +#define MAX310X_FLOWCTRL_REG (0x13) /* Flow control */ +#define MAX310X_XON1_REG (0x14) /* XON1 character */ +#define MAX310X_XON2_REG (0x15) /* XON2 character */ +#define MAX310X_XOFF1_REG (0x16) /* XOFF1 character */ +#define MAX310X_XOFF2_REG (0x17) /* XOFF2 character */ +#define MAX310X_GPIOCFG_REG (0x18) /* GPIO config */ +#define MAX310X_GPIODATA_REG (0x19) /* GPIO data */ +#define MAX310X_PLLCFG_REG (0x1a) /* PLL config */ +#define MAX310X_BRGCFG_REG (0x1b) /* Baud rate generator conf */ +#define MAX310X_BRGDIVLSB_REG (0x1c) /* Baud rate divisor LSB */ +#define MAX310X_BRGDIVMSB_REG (0x1d) /* Baud rate divisor MSB */ +#define MAX310X_CLKSRC_REG (0x1e) /* Clock source */ +/* Only present in MAX3107 */ +#define MAX3107_REVID_REG (0x1f) /* Revision identification */ + +/* IRQ register bits */ +#define MAX310X_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */ +#define MAX310X_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */ +#define MAX310X_IRQ_STS_BIT (1 << 2) /* Status interrupt */ +#define MAX310X_IRQ_RXFIFO_BIT (1 << 3) /* RX FIFO interrupt */ +#define MAX310X_IRQ_TXFIFO_BIT (1 << 4) /* TX FIFO interrupt */ +#define MAX310X_IRQ_TXEMPTY_BIT (1 << 5) /* TX FIFO empty interrupt */ +#define MAX310X_IRQ_RXEMPTY_BIT (1 << 6) /* RX FIFO empty interrupt */ +#define MAX310X_IRQ_CTS_BIT (1 << 7) /* CTS interrupt */ + +/* LSR register bits */ +#define MAX310X_LSR_RXTO_BIT (1 << 0) /* RX timeout */ +#define MAX310X_LSR_RXOVR_BIT (1 << 1) /* RX overrun */ +#define MAX310X_LSR_RXPAR_BIT (1 << 2) /* RX parity error */ +#define MAX310X_LSR_FRERR_BIT (1 << 3) /* Frame error */ +#define MAX310X_LSR_RXBRK_BIT (1 << 4) /* RX break */ +#define MAX310X_LSR_RXNOISE_BIT (1 << 5) /* RX noise */ +#define MAX310X_LSR_CTS_BIT (1 << 7) /* CTS pin state */ + +/* Special character register bits */ +#define MAX310X_SPCHR_XON1_BIT (1 << 0) /* XON1 character */ +#define MAX310X_SPCHR_XON2_BIT (1 << 1) /* XON2 character */ +#define MAX310X_SPCHR_XOFF1_BIT (1 << 2) /* XOFF1 character */ +#define MAX310X_SPCHR_XOFF2_BIT (1 << 3) /* XOFF2 character */ +#define MAX310X_SPCHR_BREAK_BIT (1 << 4) /* RX break */ +#define MAX310X_SPCHR_MULTIDROP_BIT (1 << 5) /* 9-bit multidrop addr char */ + +/* Status register bits */ +#define MAX310X_STS_GPIO0_BIT (1 << 0) /* GPIO 0 interrupt */ +#define MAX310X_STS_GPIO1_BIT (1 << 1) /* GPIO 1 interrupt */ +#define MAX310X_STS_GPIO2_BIT (1 << 2) /* GPIO 2 interrupt */ +#define MAX310X_STS_GPIO3_BIT (1 << 3) /* GPIO 3 interrupt */ +#define MAX310X_STS_CLKREADY_BIT (1 << 5) /* Clock ready */ +#define MAX310X_STS_SLEEP_BIT (1 << 6) /* Sleep interrupt */ + +/* MODE1 register bits */ +#define MAX310X_MODE1_RXDIS_BIT (1 << 0) /* RX disable */ +#define MAX310X_MODE1_TXDIS_BIT (1 << 1) /* TX disable */ +#define MAX310X_MODE1_TXHIZ_BIT (1 << 2) /* TX pin three-state */ +#define MAX310X_MODE1_RTSHIZ_BIT (1 << 3) /* RTS pin three-state */ +#define MAX310X_MODE1_TRNSCVCTRL_BIT (1 << 4) /* Transceiver ctrl enable */ +#define MAX310X_MODE1_FORCESLEEP_BIT (1 << 5) /* Force sleep mode */ +#define MAX310X_MODE1_AUTOSLEEP_BIT (1 << 6) /* Auto sleep enable */ +#define MAX310X_MODE1_IRQSEL_BIT (1 << 7) /* IRQ pin enable */ + +/* MODE2 register bits */ +#define MAX310X_MODE2_RST_BIT (1 << 0) /* Chip reset */ +#define MAX310X_MODE2_FIFORST_BIT (1 << 1) /* FIFO reset */ +#define MAX310X_MODE2_RXTRIGINV_BIT (1 << 2) /* RX FIFO INT invert */ +#define MAX310X_MODE2_RXEMPTINV_BIT (1 << 3) /* RX FIFO empty INT invert */ +#define MAX310X_MODE2_SPCHR_BIT (1 << 4) /* Special chr detect enable */ +#define MAX310X_MODE2_LOOPBACK_BIT (1 << 5) /* Internal loopback enable */ +#define MAX310X_MODE2_MULTIDROP_BIT (1 << 6) /* 9-bit multidrop enable */ +#define MAX310X_MODE2_ECHOSUPR_BIT (1 << 7) /* ECHO suppression enable */ + +/* LCR register bits */ +#define MAX310X_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */ +#define MAX310X_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1 + * + * Word length bits table: + * 00 -> 5 bit words + * 01 -> 6 bit words + * 10 -> 7 bit words + * 11 -> 8 bit words + */ +#define MAX310X_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit + * + * STOP length bit table: + * 0 -> 1 stop bit + * 1 -> 1-1.5 stop bits if + * word length is 5, + * 2 stop bits otherwise + */ +#define MAX310X_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */ +#define MAX310X_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */ +#define MAX310X_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */ +#define MAX310X_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */ +#define MAX310X_LCR_RTS_BIT (1 << 7) /* RTS pin control */ +#define MAX310X_LCR_WORD_LEN_5 (0x00) +#define MAX310X_LCR_WORD_LEN_6 (0x01) +#define MAX310X_LCR_WORD_LEN_7 (0x02) +#define MAX310X_LCR_WORD_LEN_8 (0x03) + +/* IRDA register bits */ +#define MAX310X_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */ +#define MAX310X_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */ +#define MAX310X_IRDA_SHORTIR_BIT (1 << 2) /* Short SIR mode enable */ +#define MAX310X_IRDA_MIR_BIT (1 << 3) /* MIR mode enable */ +#define MAX310X_IRDA_RXINV_BIT (1 << 4) /* RX logic inversion enable */ +#define MAX310X_IRDA_TXINV_BIT (1 << 5) /* TX logic inversion enable */ + +/* Flow control trigger level register masks */ +#define MAX310X_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */ +#define MAX310X_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */ +#define MAX310X_FLOWLVL_HALT(words) ((words / 8) & 0x0f) +#define MAX310X_FLOWLVL_RES(words) (((words / 8) & 0x0f) << 4) + +/* FIFO interrupt trigger level register masks */ +#define MAX310X_FIFOTRIGLVL_TX_MASK (0x0f) /* TX FIFO trigger level */ +#define MAX310X_FIFOTRIGLVL_RX_MASK (0xf0) /* RX FIFO trigger level */ +#define MAX310X_FIFOTRIGLVL_TX(words) ((words / 8) & 0x0f) +#define MAX310X_FIFOTRIGLVL_RX(words) (((words / 8) & 0x0f) << 4) + +/* Flow control register bits */ +#define MAX310X_FLOWCTRL_AUTORTS_BIT (1 << 0) /* Auto RTS flow ctrl enable */ +#define MAX310X_FLOWCTRL_AUTOCTS_BIT (1 << 1) /* Auto CTS flow ctrl enable */ +#define MAX310X_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs + * are used in conjunction with + * XOFF2 for definition of + * special character */ +#define MAX310X_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */ +#define MAX310X_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */ +#define MAX310X_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1 + * + * SWFLOW bits 1 & 0 table: + * 00 -> no transmitter flow + * control + * 01 -> receiver compares + * XON2 and XOFF2 + * and controls + * transmitter + * 10 -> receiver compares + * XON1 and XOFF1 + * and controls + * transmitter + * 11 -> receiver compares + * XON1, XON2, XOFF1 and + * XOFF2 and controls + * transmitter + */ +#define MAX310X_FLOWCTRL_SWFLOW2_BIT (1 << 6) /* SWFLOW bit 2 */ +#define MAX310X_FLOWCTRL_SWFLOW3_BIT (1 << 7) /* SWFLOW bit 3 + * + * SWFLOW bits 3 & 2 table: + * 00 -> no received flow + * control + * 01 -> transmitter generates + * XON2 and XOFF2 + * 10 -> transmitter generates + * XON1 and XOFF1 + * 11 -> transmitter generates + * XON1, XON2, XOFF1 and + * XOFF2 + */ + +/* GPIO configuration register bits */ +#define MAX310X_GPIOCFG_GP0OUT_BIT (1 << 0) /* GPIO 0 output enable */ +#define MAX310X_GPIOCFG_GP1OUT_BIT (1 << 1) /* GPIO 1 output enable */ +#define MAX310X_GPIOCFG_GP2OUT_BIT (1 << 2) /* GPIO 2 output enable */ +#define MAX310X_GPIOCFG_GP3OUT_BIT (1 << 3) /* GPIO 3 output enable */ +#define MAX310X_GPIOCFG_GP0OD_BIT (1 << 4) /* GPIO 0 open-drain enable */ +#define MAX310X_GPIOCFG_GP1OD_BIT (1 << 5) /* GPIO 1 open-drain enable */ +#define MAX310X_GPIOCFG_GP2OD_BIT (1 << 6) /* GPIO 2 open-drain enable */ +#define MAX310X_GPIOCFG_GP3OD_BIT (1 << 7) /* GPIO 3 open-drain enable */ + +/* GPIO DATA register bits */ +#define MAX310X_GPIODATA_GP0OUT_BIT (1 << 0) /* GPIO 0 output value */ +#define MAX310X_GPIODATA_GP1OUT_BIT (1 << 1) /* GPIO 1 output value */ +#define MAX310X_GPIODATA_GP2OUT_BIT (1 << 2) /* GPIO 2 output value */ +#define MAX310X_GPIODATA_GP3OUT_BIT (1 << 3) /* GPIO 3 output value */ +#define MAX310X_GPIODATA_GP0IN_BIT (1 << 4) /* GPIO 0 input value */ +#define MAX310X_GPIODATA_GP1IN_BIT (1 << 5) /* GPIO 1 input value */ +#define MAX310X_GPIODATA_GP2IN_BIT (1 << 6) /* GPIO 2 input value */ +#define MAX310X_GPIODATA_GP3IN_BIT (1 << 7) /* GPIO 3 input value */ + +/* PLL configuration register masks */ +#define MAX310X_PLLCFG_PREDIV_MASK (0x3f) /* PLL predivision value */ +#define MAX310X_PLLCFG_PLLFACTOR_MASK (0xc0) /* PLL multiplication factor */ + +/* Baud rate generator configuration register bits */ +#define MAX310X_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */ +#define MAX310X_BRGCFG_4XMODE_BIT (1 << 5) /* Quadruple baud rate */ + +/* Clock source register bits */ +#define MAX310X_CLKSRC_CRYST_BIT (1 << 1) /* Crystal osc enable */ +#define MAX310X_CLKSRC_PLL_BIT (1 << 2) /* PLL enable */ +#define MAX310X_CLKSRC_PLLBYP_BIT (1 << 3) /* PLL bypass */ +#define MAX310X_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */ +#define MAX310X_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */ + +/* Misc definitions */ +#define MAX310X_FIFO_SIZE (128) + +/* MAX3107 specific */ +#define MAX3107_REV_ID (0xa0) +#define MAX3107_REV_MASK (0xfe) + +/* IRQ status bits definitions */ +#define MAX310X_IRQ_TX (MAX310X_IRQ_TXFIFO_BIT | \ + MAX310X_IRQ_TXEMPTY_BIT) +#define MAX310X_IRQ_RX (MAX310X_IRQ_RXFIFO_BIT | \ + MAX310X_IRQ_RXEMPTY_BIT) + +/* Supported chip types */ +enum { + MAX310X_TYPE_MAX3107 = 3107, + MAX310X_TYPE_MAX3108 = 3108, +}; + +struct max310x_port { + struct uart_driver uart; + struct uart_port port; + + const char *name; + int uartclk; + + unsigned int nr_gpio; +#ifdef CONFIG_GPIOLIB + struct gpio_chip gpio; +#endif + + struct regmap *regmap; + struct regmap_config regcfg; + + struct workqueue_struct *wq; + struct work_struct tx_work; + + struct mutex max310x_mutex; + + struct max310x_pdata *pdata; +}; + +static bool max3107_8_reg_writeable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX310X_IRQSTS_REG: + case MAX310X_LSR_IRQSTS_REG: + case MAX310X_SPCHR_IRQSTS_REG: + case MAX310X_STS_IRQSTS_REG: + case MAX310X_TXFIFOLVL_REG: + case MAX310X_RXFIFOLVL_REG: + case MAX3107_REVID_REG: /* Only available on MAX3107 */ + return false; + default: + break; + } + + return true; +} + +static bool max310x_reg_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX310X_RHR_REG: + case MAX310X_IRQSTS_REG: + case MAX310X_LSR_IRQSTS_REG: + case MAX310X_SPCHR_IRQSTS_REG: + case MAX310X_STS_IRQSTS_REG: + case MAX310X_TXFIFOLVL_REG: + case MAX310X_RXFIFOLVL_REG: + case MAX310X_GPIODATA_REG: + return true; + default: + break; + } + + return false; +} + +static bool max310x_reg_precious(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX310X_RHR_REG: + case MAX310X_IRQSTS_REG: + case MAX310X_SPCHR_IRQSTS_REG: + case MAX310X_STS_IRQSTS_REG: + return true; + default: + break; + } + + return false; +} + +static void max310x_set_baud(struct max310x_port *s, int baud) +{ + unsigned int mode = 0, div = s->uartclk / baud; + + if (!(div / 16)) { + /* Mode x2 */ + mode = MAX310X_BRGCFG_2XMODE_BIT; + div = (s->uartclk * 2) / baud; + } + + if (!(div / 16)) { + /* Mode x4 */ + mode = MAX310X_BRGCFG_4XMODE_BIT; + div = (s->uartclk * 4) / baud; + } + + regmap_write(s->regmap, MAX310X_BRGDIVMSB_REG, + ((div / 16) >> 8) & 0xff); + regmap_write(s->regmap, MAX310X_BRGDIVLSB_REG, (div / 16) & 0xff); + regmap_write(s->regmap, MAX310X_BRGCFG_REG, (div % 16) | mode); +} + +static void max310x_wait_pll(struct max310x_port *s) +{ + int tryes = 1000; + + /* Wait for PLL only if crystal is used */ + if (!(s->pdata->driver_flags & MAX310X_EXT_CLK)) { + unsigned int sts = 0; + + while (tryes--) { + regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &sts); + if (sts & MAX310X_STS_CLKREADY_BIT) + break; + } + } +} + +static int __devinit max310x_update_best_err(unsigned long f, long *besterr) +{ + /* Use baudrate 115200 for calculate error */ + long err = f % (115200 * 16); + + if ((*besterr < 0) || (*besterr > err)) { + *besterr = err; + return 0; + } + + return 1; +} + +static int __devinit max310x_set_ref_clk(struct max310x_port *s) +{ + unsigned int div, clksrc, pllcfg = 0; + long besterr = -1; + unsigned long fdiv, fmul, bestfreq = s->pdata->frequency; + + /* First, update error without PLL */ + max310x_update_best_err(s->pdata->frequency, &besterr); + + /* Try all possible PLL dividers */ + for (div = 1; (div <= 63) && besterr; div++) { + fdiv = DIV_ROUND_CLOSEST(s->pdata->frequency, div); + + /* Try multiplier 6 */ + fmul = fdiv * 6; + if ((fdiv >= 500000) && (fdiv <= 800000)) + if (!max310x_update_best_err(fmul, &besterr)) { + pllcfg = (0 << 6) | div; + bestfreq = fmul; + } + /* Try multiplier 48 */ + fmul = fdiv * 48; + if ((fdiv >= 850000) && (fdiv <= 1200000)) + if (!max310x_update_best_err(fmul, &besterr)) { + pllcfg = (1 << 6) | div; + bestfreq = fmul; + } + /* Try multiplier 96 */ + fmul = fdiv * 96; + if ((fdiv >= 425000) && (fdiv <= 1000000)) + if (!max310x_update_best_err(fmul, &besterr)) { + pllcfg = (2 << 6) | div; + bestfreq = fmul; + } + /* Try multiplier 144 */ + fmul = fdiv * 144; + if ((fdiv >= 390000) && (fdiv <= 667000)) + if (!max310x_update_best_err(fmul, &besterr)) { + pllcfg = (3 << 6) | div; + bestfreq = fmul; + } + } + + /* Configure clock source */ + if (s->pdata->driver_flags & MAX310X_EXT_CLK) + clksrc = MAX310X_CLKSRC_EXTCLK_BIT; + else + clksrc = MAX310X_CLKSRC_CRYST_BIT; + + /* Configure PLL */ + if (pllcfg) { + clksrc |= MAX310X_CLKSRC_PLL_BIT; + regmap_write(s->regmap, MAX310X_PLLCFG_REG, pllcfg); + } else + clksrc |= MAX310X_CLKSRC_PLLBYP_BIT; + + regmap_write(s->regmap, MAX310X_CLKSRC_REG, clksrc); + + if (pllcfg) + max310x_wait_pll(s); + + dev_dbg(s->port.dev, "Reference clock set to %lu Hz\n", bestfreq); + + return (int)bestfreq; +} + +static void max310x_handle_rx(struct max310x_port *s, unsigned int rxlen) +{ + unsigned int sts = 0, ch = 0, flag; + struct tty_struct *tty = tty_port_tty_get(&s->port.state->port); + + if (!tty) + return; + + if (unlikely(rxlen >= MAX310X_FIFO_SIZE)) { + dev_warn(s->port.dev, "Possible RX FIFO overrun %d\n", rxlen); + /* Ensure sanity of RX level */ + rxlen = MAX310X_FIFO_SIZE; + } + + dev_dbg(s->port.dev, "RX Len = %u\n", rxlen); + + while (rxlen--) { + regmap_read(s->regmap, MAX310X_RHR_REG, &ch); + regmap_read(s->regmap, MAX310X_LSR_IRQSTS_REG, &sts); + + sts &= MAX310X_LSR_RXPAR_BIT | MAX310X_LSR_FRERR_BIT | + MAX310X_LSR_RXOVR_BIT | MAX310X_LSR_RXBRK_BIT; + + s->port.icount.rx++; + flag = TTY_NORMAL; + + if (unlikely(sts)) { + if (sts & MAX310X_LSR_RXBRK_BIT) { + s->port.icount.brk++; + if (uart_handle_break(&s->port)) + continue; + } else if (sts & MAX310X_LSR_RXPAR_BIT) + s->port.icount.parity++; + else if (sts & MAX310X_LSR_FRERR_BIT) + s->port.icount.frame++; + else if (sts & MAX310X_LSR_RXOVR_BIT) + s->port.icount.overrun++; + + sts &= s->port.read_status_mask; + if (sts & MAX310X_LSR_RXBRK_BIT) + flag = TTY_BREAK; + else if (sts & MAX310X_LSR_RXPAR_BIT) + flag = TTY_PARITY; + else if (sts & MAX310X_LSR_FRERR_BIT) + flag = TTY_FRAME; + else if (sts & MAX310X_LSR_RXOVR_BIT) + flag = TTY_OVERRUN; + } + + if (uart_handle_sysrq_char(s->port, ch)) + continue; + + if (sts & s->port.ignore_status_mask) + continue; + + uart_insert_char(&s->port, sts, MAX310X_LSR_RXOVR_BIT, + ch, flag); + } + + tty_flip_buffer_push(tty); + + tty_kref_put(tty); +} + +static void max310x_handle_tx(struct max310x_port *s) +{ + struct circ_buf *xmit = &s->port.state->xmit; + unsigned int txlen = 0, to_send; + + if (unlikely(s->port.x_char)) { + regmap_write(s->regmap, MAX310X_THR_REG, s->port.x_char); + s->port.icount.tx++; + s->port.x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port)) + return; + + /* Get length of data pending in circular buffer */ + to_send = uart_circ_chars_pending(xmit); + if (likely(to_send)) { + /* Limit to size of TX FIFO */ + regmap_read(s->regmap, MAX310X_TXFIFOLVL_REG, &txlen); + txlen = MAX310X_FIFO_SIZE - txlen; + to_send = (to_send > txlen) ? txlen : to_send; + + dev_dbg(s->port.dev, "TX Len = %u\n", to_send); + + /* Add data to send */ + s->port.icount.tx += to_send; + while (to_send--) { + regmap_write(s->regmap, MAX310X_THR_REG, + xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + }; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&s->port); +} + +static irqreturn_t max310x_ist(int irq, void *dev_id) +{ + struct max310x_port *s = (struct max310x_port *)dev_id; + unsigned int ists = 0, lsr = 0, rxlen = 0; + + mutex_lock(&s->max310x_mutex); + + for (;;) { + /* Read IRQ status & RX FIFO level */ + regmap_read(s->regmap, MAX310X_IRQSTS_REG, &ists); + regmap_read(s->regmap, MAX310X_LSR_IRQSTS_REG, &lsr); + regmap_read(s->regmap, MAX310X_RXFIFOLVL_REG, &rxlen); + if (!ists && !(lsr & MAX310X_LSR_RXTO_BIT) && !rxlen) + break; + + dev_dbg(s->port.dev, "IRQ status: 0x%02x\n", ists); + + if (rxlen) + max310x_handle_rx(s, rxlen); + if (ists & MAX310X_IRQ_TX) + max310x_handle_tx(s); + if (ists & MAX310X_IRQ_CTS_BIT) + uart_handle_cts_change(&s->port, + !!(lsr & MAX310X_LSR_CTS_BIT)); + } + + mutex_unlock(&s->max310x_mutex); + + return IRQ_HANDLED; +} + +static void max310x_wq_proc(struct work_struct *ws) +{ + struct max310x_port *s = container_of(ws, struct max310x_port, tx_work); + + mutex_lock(&s->max310x_mutex); + max310x_handle_tx(s); + mutex_unlock(&s->max310x_mutex); +} + +static void max310x_start_tx(struct uart_port *port) +{ + struct max310x_port *s = container_of(port, struct max310x_port, port); + + queue_work(s->wq, &s->tx_work); +} + +static void max310x_stop_tx(struct uart_port *port) +{ + /* Do nothing */ +} + +static void max310x_stop_rx(struct uart_port *port) +{ + /* Do nothing */ +} + +static unsigned int max310x_tx_empty(struct uart_port *port) +{ + unsigned int val = 0; + struct max310x_port *s = container_of(port, struct max310x_port, port); + + mutex_lock(&s->max310x_mutex); + regmap_read(s->regmap, MAX310X_TXFIFOLVL_REG, &val); + mutex_unlock(&s->max310x_mutex); + + return val ? 0 : TIOCSER_TEMT; +} + +static void max310x_enable_ms(struct uart_port *port) +{ + /* Modem status not supported */ +} + +static unsigned int max310x_get_mctrl(struct uart_port *port) +{ + /* DCD and DSR are not wired and CTS/RTS is handled automatically + * so just indicate DSR and CAR asserted + */ + return TIOCM_DSR | TIOCM_CAR; +} + +static void max310x_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* DCD and DSR are not wired and CTS/RTS is hadnled automatically + * so do nothing + */ +} + +static void max310x_break_ctl(struct uart_port *port, int break_state) +{ + struct max310x_port *s = container_of(port, struct max310x_port, port); + + mutex_lock(&s->max310x_mutex); + regmap_update_bits(s->regmap, MAX310X_LCR_REG, + MAX310X_LCR_TXBREAK_BIT, + break_state ? MAX310X_LCR_TXBREAK_BIT : 0); + mutex_unlock(&s->max310x_mutex); +} + +static void max310x_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct max310x_port *s = container_of(port, struct max310x_port, port); + unsigned int lcr, flow = 0; + int baud; + + mutex_lock(&s->max310x_mutex); + + /* Mask termios capabilities we don't support */ + termios->c_cflag &= ~CMSPAR; + termios->c_iflag &= ~IXANY; + + /* Word size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr = MAX310X_LCR_WORD_LEN_5; + break; + case CS6: + lcr = MAX310X_LCR_WORD_LEN_6; + break; + case CS7: + lcr = MAX310X_LCR_WORD_LEN_7; + break; + case CS8: + default: + lcr = MAX310X_LCR_WORD_LEN_8; + break; + } + + /* Parity */ + if (termios->c_cflag & PARENB) { + lcr |= MAX310X_LCR_PARITY_BIT; + if (!(termios->c_cflag & PARODD)) + lcr |= MAX310X_LCR_EVENPARITY_BIT; + } + + /* Stop bits */ + if (termios->c_cflag & CSTOPB) + lcr |= MAX310X_LCR_STOPLEN_BIT; /* 2 stops */ + + /* Update LCR register */ + regmap_write(s->regmap, MAX310X_LCR_REG, lcr); + + /* Set read status mask */ + port->read_status_mask = MAX310X_LSR_RXOVR_BIT; + if (termios->c_iflag & INPCK) + port->read_status_mask |= MAX310X_LSR_RXPAR_BIT | + MAX310X_LSR_FRERR_BIT; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= MAX310X_LSR_RXBRK_BIT; + + /* Set status ignore mask */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNBRK) + port->ignore_status_mask |= MAX310X_LSR_RXBRK_BIT; + if (!(termios->c_cflag & CREAD)) + port->ignore_status_mask |= MAX310X_LSR_RXPAR_BIT | + MAX310X_LSR_RXOVR_BIT | + MAX310X_LSR_FRERR_BIT | + MAX310X_LSR_RXBRK_BIT; + + /* Configure flow control */ + regmap_write(s->regmap, MAX310X_XON1_REG, termios->c_cc[VSTART]); + regmap_write(s->regmap, MAX310X_XOFF1_REG, termios->c_cc[VSTOP]); + if (termios->c_cflag & CRTSCTS) + flow |= MAX310X_FLOWCTRL_AUTOCTS_BIT | + MAX310X_FLOWCTRL_AUTORTS_BIT; + if (termios->c_iflag & IXON) + flow |= MAX310X_FLOWCTRL_SWFLOW3_BIT | + MAX310X_FLOWCTRL_SWFLOWEN_BIT; + if (termios->c_iflag & IXOFF) + flow |= MAX310X_FLOWCTRL_SWFLOW1_BIT | + MAX310X_FLOWCTRL_SWFLOWEN_BIT; + regmap_write(s->regmap, MAX310X_FLOWCTRL_REG, flow); + + /* Get baud rate generator configuration */ + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / 16 / 0xffff, + port->uartclk / 4); + + /* Setup baudrate generator */ + max310x_set_baud(s, baud); + + /* Update timeout according to new baud rate */ + uart_update_timeout(port, termios->c_cflag, baud); + + mutex_unlock(&s->max310x_mutex); +} + +static int max310x_startup(struct uart_port *port) +{ + unsigned int val, line = port->line; + struct max310x_port *s = container_of(port, struct max310x_port, port); + + if (s->pdata->suspend) + s->pdata->suspend(0); + + mutex_lock(&s->max310x_mutex); + + /* Configure baud rate, 9600 as default */ + max310x_set_baud(s, 9600); + + /* Configure LCR register, 8N1 mode by default */ + val = MAX310X_LCR_WORD_LEN_8; + regmap_write(s->regmap, MAX310X_LCR_REG, val); + + /* Configure MODE1 register */ + regmap_update_bits(s->regmap, MAX310X_MODE1_REG, + MAX310X_MODE1_TRNSCVCTRL_BIT, + (s->pdata->uart_flags[line] & MAX310X_AUTO_DIR_CTRL) + ? MAX310X_MODE1_TRNSCVCTRL_BIT : 0); + + /* Configure MODE2 register */ + val = MAX310X_MODE2_RXEMPTINV_BIT; + if (s->pdata->uart_flags[line] & MAX310X_LOOPBACK) + val |= MAX310X_MODE2_LOOPBACK_BIT; + if (s->pdata->uart_flags[line] & MAX310X_ECHO_SUPRESS) + val |= MAX310X_MODE2_ECHOSUPR_BIT; + + /* Reset FIFOs */ + val |= MAX310X_MODE2_FIFORST_BIT; + regmap_write(s->regmap, MAX310X_MODE2_REG, val); + + /* Configure FIFO trigger level register */ + /* RX FIFO trigger for 16 words, TX FIFO trigger for 64 words */ + val = MAX310X_FIFOTRIGLVL_RX(16) | MAX310X_FIFOTRIGLVL_TX(64); + regmap_write(s->regmap, MAX310X_FIFOTRIGLVL_REG, val); + + /* Configure flow control levels */ + /* Flow control halt level 96, resume level 48 */ + val = MAX310X_FLOWLVL_RES(48) | MAX310X_FLOWLVL_HALT(96); + regmap_write(s->regmap, MAX310X_FLOWLVL_REG, val); + + /* Clear timeout register */ + regmap_write(s->regmap, MAX310X_RXTO_REG, 0); + + /* Configure LSR interrupt enable register */ + /* Enable RX timeout interrupt */ + val = MAX310X_LSR_RXTO_BIT; + regmap_write(s->regmap, MAX310X_LSR_IRQEN_REG, val); + + /* Clear FIFO reset */ + regmap_update_bits(s->regmap, MAX310X_MODE2_REG, + MAX310X_MODE2_FIFORST_BIT, 0); + + /* Clear IRQ status register by reading it */ + regmap_read(s->regmap, MAX310X_IRQSTS_REG, &val); + + /* Configure interrupt enable register */ + /* Enable CTS change interrupt */ + val = MAX310X_IRQ_CTS_BIT; + /* Enable RX, TX interrupts */ + val |= MAX310X_IRQ_RX | MAX310X_IRQ_TX; + regmap_write(s->regmap, MAX310X_IRQEN_REG, val); + + mutex_unlock(&s->max310x_mutex); + + return 0; +} + +static void max310x_shutdown(struct uart_port *port) +{ + struct max310x_port *s = container_of(port, struct max310x_port, port); + + /* Disable all interrupts */ + mutex_lock(&s->max310x_mutex); + regmap_write(s->regmap, MAX310X_IRQEN_REG, 0); + mutex_unlock(&s->max310x_mutex); + + if (s->pdata->suspend) + s->pdata->suspend(1); +} + +static const char *max310x_type(struct uart_port *port) +{ + struct max310x_port *s = container_of(port, struct max310x_port, port); + + return (port->type == PORT_MAX310X) ? s->name : NULL; +} + +static int max310x_request_port(struct uart_port *port) +{ + /* Do nothing */ + return 0; +} + +static void max310x_release_port(struct uart_port *port) +{ + /* Do nothing */ +} + +static void max310x_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_MAX310X; +} + +static int max310x_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if ((ser->type == PORT_UNKNOWN) || (ser->type == PORT_MAX310X)) + return 0; + if (ser->irq == port->irq) + return 0; + + return -EINVAL; +} + +static struct uart_ops max310x_ops = { + .tx_empty = max310x_tx_empty, + .set_mctrl = max310x_set_mctrl, + .get_mctrl = max310x_get_mctrl, + .stop_tx = max310x_stop_tx, + .start_tx = max310x_start_tx, + .stop_rx = max310x_stop_rx, + .enable_ms = max310x_enable_ms, + .break_ctl = max310x_break_ctl, + .startup = max310x_startup, + .shutdown = max310x_shutdown, + .set_termios = max310x_set_termios, + .type = max310x_type, + .request_port = max310x_request_port, + .release_port = max310x_release_port, + .config_port = max310x_config_port, + .verify_port = max310x_verify_port, +}; + +static int max310x_suspend(struct spi_device *spi, pm_message_t state) +{ + int ret; + struct max310x_port *s = dev_get_drvdata(&spi->dev); + + dev_dbg(&spi->dev, "Suspend\n"); + + ret = uart_suspend_port(&s->uart, &s->port); + + mutex_lock(&s->max310x_mutex); + + /* Enable sleep mode */ + regmap_update_bits(s->regmap, MAX310X_MODE1_REG, + MAX310X_MODE1_FORCESLEEP_BIT, + MAX310X_MODE1_FORCESLEEP_BIT); + + mutex_unlock(&s->max310x_mutex); + + if (s->pdata->suspend) + s->pdata->suspend(1); + + return ret; +} + +static int max310x_resume(struct spi_device *spi) +{ + struct max310x_port *s = dev_get_drvdata(&spi->dev); + + dev_dbg(&spi->dev, "Resume\n"); + + if (s->pdata->suspend) + s->pdata->suspend(0); + + mutex_lock(&s->max310x_mutex); + + /* Disable sleep mode */ + regmap_update_bits(s->regmap, MAX310X_MODE1_REG, + MAX310X_MODE1_FORCESLEEP_BIT, + 0); + + max310x_wait_pll(s); + + mutex_unlock(&s->max310x_mutex); + + return uart_resume_port(&s->uart, &s->port); +} + +#ifdef CONFIG_GPIOLIB +static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + unsigned int val = 0; + struct max310x_port *s = container_of(chip, struct max310x_port, gpio); + + mutex_lock(&s->max310x_mutex); + regmap_read(s->regmap, MAX310X_GPIODATA_REG, &val); + mutex_unlock(&s->max310x_mutex); + + return !!((val >> 4) & (1 << offset)); +} + +static void max310x_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct max310x_port *s = container_of(chip, struct max310x_port, gpio); + + mutex_lock(&s->max310x_mutex); + regmap_update_bits(s->regmap, MAX310X_GPIODATA_REG, 1 << offset, value ? + 1 << offset : 0); + mutex_unlock(&s->max310x_mutex); +} + +static int max310x_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct max310x_port *s = container_of(chip, struct max310x_port, gpio); + + mutex_lock(&s->max310x_mutex); + + regmap_update_bits(s->regmap, MAX310X_GPIOCFG_REG, 1 << offset, 0); + + mutex_unlock(&s->max310x_mutex); + + return 0; +} + +static int max310x_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct max310x_port *s = container_of(chip, struct max310x_port, gpio); + + mutex_lock(&s->max310x_mutex); + + regmap_update_bits(s->regmap, MAX310X_GPIOCFG_REG, 1 << offset, + 1 << offset); + regmap_update_bits(s->regmap, MAX310X_GPIODATA_REG, 1 << offset, value ? + 1 << offset : 0); + + mutex_unlock(&s->max310x_mutex); + + return 0; +} +#endif + +/* Generic platform data */ +static struct max310x_pdata generic_plat_data = { + .driver_flags = MAX310X_EXT_CLK, + .uart_flags[0] = MAX310X_ECHO_SUPRESS, + .frequency = 26000000, +}; + +static int __devinit max310x_probe(struct spi_device *spi) +{ + struct max310x_port *s; + struct device *dev = &spi->dev; + int chiptype = spi_get_device_id(spi)->driver_data; + struct max310x_pdata *pdata = dev->platform_data; + unsigned int val = 0; + int ret; + + /* Check for IRQ */ + if (spi->irq <= 0) { + dev_err(dev, "No IRQ specified\n"); + return -ENOTSUPP; + } + + /* Alloc port structure */ + s = devm_kzalloc(dev, sizeof(struct max310x_port), GFP_KERNEL); + if (!s) { + dev_err(dev, "Error allocating port structure\n"); + return -ENOMEM; + } + dev_set_drvdata(dev, s); + + if (!pdata) { + dev_warn(dev, "No platform data supplied, using defaults\n"); + pdata = &generic_plat_data; + } + s->pdata = pdata; + + /* Individual chip settings */ + switch (chiptype) { + case MAX310X_TYPE_MAX3107: + s->name = "MAX3107"; + s->nr_gpio = 4; + s->uart.nr = 1; + s->regcfg.max_register = 0x1f; + break; + case MAX310X_TYPE_MAX3108: + s->name = "MAX3108"; + s->nr_gpio = 4; + s->uart.nr = 1; + s->regcfg.max_register = 0x1e; + break; + default: + dev_err(dev, "Unsupported chip type %i\n", chiptype); + return -ENOTSUPP; + } + + /* Check input frequency */ + if ((pdata->driver_flags & MAX310X_EXT_CLK) && + ((pdata->frequency < 500000) || (pdata->frequency > 35000000))) + goto err_freq; + /* Check frequency for quartz */ + if (!(pdata->driver_flags & MAX310X_EXT_CLK) && + ((pdata->frequency < 1000000) || (pdata->frequency > 4000000))) + goto err_freq; + + mutex_init(&s->max310x_mutex); + + /* Setup SPI bus */ + spi->mode = SPI_MODE_0; + spi->bits_per_word = 8; + spi->max_speed_hz = 26000000; + spi_setup(spi); + + /* Setup regmap */ + s->regcfg.reg_bits = 8; + s->regcfg.val_bits = 8; + s->regcfg.read_flag_mask = 0x00; + s->regcfg.write_flag_mask = 0x80; + s->regcfg.cache_type = REGCACHE_RBTREE; + s->regcfg.writeable_reg = max3107_8_reg_writeable; + s->regcfg.volatile_reg = max310x_reg_volatile; + s->regcfg.precious_reg = max310x_reg_precious; + s->regmap = devm_regmap_init_spi(spi, &s->regcfg); + if (IS_ERR(s->regmap)) { + ret = PTR_ERR(s->regmap); + dev_err(dev, "Failed to initialize register map\n"); + goto err_out; + } + + /* Reset chip & check SPI function */ + ret = regmap_write(s->regmap, MAX310X_MODE2_REG, MAX310X_MODE2_RST_BIT); + if (ret) { + dev_err(dev, "SPI transfer failed\n"); + goto err_out; + } + /* Clear chip reset */ + regmap_write(s->regmap, MAX310X_MODE2_REG, 0); + + switch (chiptype) { + case MAX310X_TYPE_MAX3107: + /* Check REV ID to ensure we are talking to what we expect */ + regmap_read(s->regmap, MAX3107_REVID_REG, &val); + if (((val & MAX3107_REV_MASK) != MAX3107_REV_ID)) { + dev_err(dev, "%s ID 0x%02x does not match\n", + s->name, val); + ret = -ENODEV; + goto err_out; + } + break; + case MAX310X_TYPE_MAX3108: + /* MAX3108 have not REV ID register, we just check default value + * from clocksource register to make sure everything works. + */ + regmap_read(s->regmap, MAX310X_CLKSRC_REG, &val); + if (val != (MAX310X_CLKSRC_EXTCLK_BIT | + MAX310X_CLKSRC_PLLBYP_BIT)) { + dev_err(dev, "%s not present\n", s->name); + ret = -ENODEV; + goto err_out; + } + break; + } + + /* Board specific configure */ + if (pdata->init) + pdata->init(); + if (pdata->suspend) + pdata->suspend(0); + + /* Calculate referecne clock */ + s->uartclk = max310x_set_ref_clk(s); + + /* Disable all interrupts */ + regmap_write(s->regmap, MAX310X_IRQEN_REG, 0); + + /* Setup MODE1 register */ + val = MAX310X_MODE1_IRQSEL_BIT; /* Enable IRQ pin */ + if (pdata->driver_flags & MAX310X_AUTOSLEEP) + val = MAX310X_MODE1_AUTOSLEEP_BIT; + regmap_write(s->regmap, MAX310X_MODE1_REG, val); + + /* Setup interrupt */ + ret = devm_request_threaded_irq(dev, spi->irq, NULL, max310x_ist, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + dev_name(dev), s); + if (ret) { + dev_err(dev, "Unable to reguest IRQ %i\n", spi->irq); + goto err_out; + } + + /* Register UART driver */ + s->uart.owner = THIS_MODULE; + s->uart.driver_name = dev_name(dev); + s->uart.dev_name = "ttyMAX"; + s->uart.major = MAX310X_MAJOR; + s->uart.minor = MAX310X_MINOR; + ret = uart_register_driver(&s->uart); + if (ret) { + dev_err(dev, "Registering UART driver failed\n"); + goto err_out; + } + + /* Initialize workqueue for start TX */ + s->wq = create_freezable_workqueue(dev_name(dev)); + INIT_WORK(&s->tx_work, max310x_wq_proc); + + /* Initialize UART port data */ + s->port.line = 0; + s->port.dev = dev; + s->port.irq = spi->irq; + s->port.type = PORT_MAX310X; + s->port.fifosize = MAX310X_FIFO_SIZE; + s->port.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE; + s->port.iotype = UPIO_PORT; + s->port.membase = (void __iomem *)0xffffffff; /* Bogus value */ + s->port.uartclk = s->uartclk; + s->port.ops = &max310x_ops; + uart_add_one_port(&s->uart, &s->port); + +#ifdef CONFIG_GPIOLIB + /* Setup GPIO cotroller */ + if (pdata->gpio_base) { + s->gpio.owner = THIS_MODULE; + s->gpio.dev = dev; + s->gpio.label = dev_name(dev); + s->gpio.direction_input = max310x_gpio_direction_input; + s->gpio.get = max310x_gpio_get; + s->gpio.direction_output= max310x_gpio_direction_output; + s->gpio.set = max310x_gpio_set; + s->gpio.base = pdata->gpio_base; + s->gpio.ngpio = s->nr_gpio; + if (gpiochip_add(&s->gpio)) { + /* Indicate that we should not call gpiochip_remove */ + s->gpio.base = 0; + } + } else + dev_info(dev, "GPIO support not enabled\n"); +#endif + + /* Go to suspend mode */ + if (pdata->suspend) + pdata->suspend(1); + + return 0; + +err_freq: + dev_err(dev, "Frequency parameter incorrect\n"); + ret = -EINVAL; + +err_out: + dev_set_drvdata(dev, NULL); + + return ret; +} + +static int __devexit max310x_remove(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct max310x_port *s = dev_get_drvdata(dev); + int ret = 0; + + dev_dbg(dev, "Removing port\n"); + + devm_free_irq(dev, s->port.irq, s); + + destroy_workqueue(s->wq); + + uart_remove_one_port(&s->uart, &s->port); + + uart_unregister_driver(&s->uart); + +#ifdef CONFIG_GPIOLIB + if (s->pdata->gpio_base) { + ret = gpiochip_remove(&s->gpio); + if (ret) + dev_err(dev, "Failed to remove gpio chip: %d\n", ret); + } +#endif + + dev_set_drvdata(dev, NULL); + + if (s->pdata->suspend) + s->pdata->suspend(1); + if (s->pdata->exit) + s->pdata->exit(); + + return ret; +} + +static const struct spi_device_id max310x_id_table[] = { + { "max3107", MAX310X_TYPE_MAX3107 }, + { "max3108", MAX310X_TYPE_MAX3108 }, +}; +MODULE_DEVICE_TABLE(spi, max310x_id_table); + +static struct spi_driver max310x_driver = { + .driver = { + .name = "max310x", + .owner = THIS_MODULE, + }, + .probe = max310x_probe, + .remove = __devexit_p(max310x_remove), + .suspend = max310x_suspend, + .resume = max310x_resume, + .id_table = max310x_id_table, +}; +module_spi_driver(max310x_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); +MODULE_DESCRIPTION("MAX310X serial driver"); diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index bedac0d4c9ce..f19d04ed8586 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -775,11 +775,15 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, } if (new->c_cflag & PARENB) { + if (new->c_cflag & CMSPAR) + mr1 |= MPC52xx_PSC_MODE_PARFORCE; + + /* With CMSPAR, PARODD also means high parity (same as termios) */ mr1 |= (new->c_cflag & PARODD) ? MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN; - } else + } else { mr1 |= MPC52xx_PSC_MODE_PARNONE; - + } mr2 = 0; diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 8131e2c28015..033e0bc9ebab 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -896,7 +896,7 @@ static int __init msm_serial_probe(struct platform_device *pdev) return PTR_ERR(msm_port->clk); if (msm_port->is_uartdm) - clk_set_rate(msm_port->clk, 7372800); + clk_set_rate(msm_port->clk, 1843200); port->uartclk = clk_get_rate(msm_port->clk); printk(KERN_INFO "uartclk = %d\n", port->uartclk); diff --git a/drivers/tty/serial/msm_smd_tty.c b/drivers/tty/serial/msm_smd_tty.c index b25e6ee71443..925d1fa153db 100644 --- a/drivers/tty/serial/msm_smd_tty.c +++ b/drivers/tty/serial/msm_smd_tty.c @@ -223,9 +223,11 @@ static int __init smd_tty_init(void) return ret; for (i = 0; i < smd_tty_channels_len; i++) { - tty_port_init(&smd_tty[smd_tty_channels[i].id].port); - smd_tty[smd_tty_channels[i].id].port.ops = &smd_tty_port_ops; - tty_register_device(smd_tty_driver, smd_tty_channels[i].id, 0); + struct tty_port *port = &smd_tty[smd_tty_channels[i].id].port; + tty_port_init(port); + port->ops = &smd_tty_port_ops; + tty_port_register_device(port, smd_tty_driver, + smd_tty_channels[i].id, NULL); } return 0; diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 3a667eed63d6..68984136bfb1 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -262,7 +262,7 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) ctrl &= ~AUART_CTRL2_RTSEN; if (mctrl & TIOCM_RTS) { - if (u->state->port.flags & ASYNC_CTS_FLOW) + if (tty_port_cts_enabled(&u->state->port)) ctrl |= AUART_CTRL2_RTSEN; } @@ -457,11 +457,11 @@ static void mxs_auart_shutdown(struct uart_port *u) writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_CLR); - writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_SET); - writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN, u->membase + AUART_INTR_CLR); + writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_SET); + clk_disable_unprepare(s->clk); } @@ -796,6 +796,7 @@ static int __devexit mxs_auart_remove(struct platform_device *pdev) auart_port[pdev->id] = NULL; + put_device(s->dev); clk_put(s->clk); free_irq(s->irq, s); kfree(s); diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 34e71874a892..df443b908ca3 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -105,6 +105,10 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev, port->uartclk = clk; port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_FIXED_PORT | UPF_FIXED_TYPE; + + if (of_find_property(np, "no-loopback-test", NULL)) + port->flags |= UPF_SKIP_TEST; + port->dev = &ofdev->dev; if (type == PORT_TEGRA) @@ -144,8 +148,15 @@ static int __devinit of_platform_serial_probe(struct platform_device *ofdev) switch (port_type) { #ifdef CONFIG_SERIAL_8250 case PORT_8250 ... PORT_MAX_8250: - ret = serial8250_register_port(&port); + { + /* For now the of bindings don't support the extra + 8250 specific bits */ + struct uart_8250_port port8250; + memset(&port8250, 0, sizeof(port8250)); + port8250.port = port; + ret = serial8250_register_8250_port(&port8250); break; + } #endif #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL case PORT_NWPSERIAL: diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index d3cda0cb2df0..f175385bb304 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -32,16 +32,16 @@ #include <linux/slab.h> #include <linux/tty.h> #include <linux/tty_flip.h> +#include <linux/platform_device.h> #include <linux/io.h> -#include <linux/dma-mapping.h> #include <linux/clk.h> #include <linux/serial_core.h> #include <linux/irq.h> #include <linux/pm_runtime.h> #include <linux/of.h> +#include <linux/gpio.h> +#include <linux/pinctrl/consumer.h> -#include <plat/dma.h> -#include <plat/dmtimer.h> #include <plat/omap-serial.h> #define UART_BUILD_REVISION(x, y) (((x) << 8) | (y)) @@ -57,8 +57,8 @@ #define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7) /* FCR register bitmasks */ -#define OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT 6 #define OMAP_UART_FCR_RX_FIFO_TRIG_MASK (0x3 << 6) +#define OMAP_UART_FCR_TX_FIFO_TRIG_MASK (0x3 << 4) /* MVR register bitmasks */ #define OMAP_UART_MVR_SCHEME_SHIFT 30 @@ -71,12 +71,52 @@ #define OMAP_UART_MVR_MAJ_SHIFT 8 #define OMAP_UART_MVR_MIN_MASK 0x3f +struct uart_omap_port { + struct uart_port port; + struct uart_omap_dma uart_dma; + struct device *dev; + + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned char fcr; + unsigned char efr; + unsigned char dll; + unsigned char dlh; + unsigned char mdr1; + unsigned char scr; + + int use_dma; + /* + * Some bits in registers are cleared on a read, so they must + * be saved whenever the register is read but the bits will not + * be immediately processed. + */ + unsigned int lsr_break_flag; + unsigned char msr_saved_flags; + char name[20]; + unsigned long port_activity; + u32 context_loss_cnt; + u32 errata; + u8 wakeups_enabled; + unsigned int irq_pending:1; + + int DTR_gpio; + int DTR_inverted; + int DTR_active; + + struct pm_qos_request pm_qos_request; + u32 latency; + u32 calc_latency; + struct work_struct qos_work; + struct pinctrl *pins; +}; + +#define to_uart_omap_port(p) ((container_of((p), struct uart_omap_port, port))) + static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS]; /* Forward declaration of functions */ -static void uart_tx_dma_callback(int lch, u16 ch_status, void *data); -static void serial_omap_rxdma_poll(unsigned long uart_no); -static int serial_omap_start_rxdma(struct uart_omap_port *up); static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1); static struct workqueue_struct *serial_omap_uart_wq; @@ -101,6 +141,46 @@ static inline void serial_omap_clear_fifos(struct uart_omap_port *up) serial_out(up, UART_FCR, 0); } +static int serial_omap_get_context_loss_count(struct uart_omap_port *up) +{ + struct omap_uart_port_info *pdata = up->dev->platform_data; + + if (!pdata || !pdata->get_context_loss_count) + return 0; + + return pdata->get_context_loss_count(up->dev); +} + +static void serial_omap_set_forceidle(struct uart_omap_port *up) +{ + struct omap_uart_port_info *pdata = up->dev->platform_data; + + if (!pdata || !pdata->set_forceidle) + return; + + pdata->set_forceidle(up->dev); +} + +static void serial_omap_set_noidle(struct uart_omap_port *up) +{ + struct omap_uart_port_info *pdata = up->dev->platform_data; + + if (!pdata || !pdata->set_noidle) + return; + + pdata->set_noidle(up->dev); +} + +static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable) +{ + struct omap_uart_port_info *pdata = up->dev->platform_data; + + if (!pdata || !pdata->enable_wakeup) + return; + + pdata->enable_wakeup(up->dev, enable); +} + /* * serial_omap_get_divisor - calculate divisor value * @port: uart port info @@ -126,151 +206,55 @@ serial_omap_get_divisor(struct uart_port *port, unsigned int baud) return port->uartclk/(baud * divisor); } -static void serial_omap_stop_rxdma(struct uart_omap_port *up) -{ - if (up->uart_dma.rx_dma_used) { - del_timer(&up->uart_dma.rx_timer); - omap_stop_dma(up->uart_dma.rx_dma_channel); - omap_free_dma(up->uart_dma.rx_dma_channel); - up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; - up->uart_dma.rx_dma_used = false; - pm_runtime_mark_last_busy(&up->pdev->dev); - pm_runtime_put_autosuspend(&up->pdev->dev); - } -} - static void serial_omap_enable_ms(struct uart_port *port) { - struct uart_omap_port *up = (struct uart_omap_port *)port; + struct uart_omap_port *up = to_uart_omap_port(port); dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->port.line); - pm_runtime_get_sync(&up->pdev->dev); + pm_runtime_get_sync(up->dev); up->ier |= UART_IER_MSI; serial_out(up, UART_IER, up->ier); - pm_runtime_put(&up->pdev->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); } static void serial_omap_stop_tx(struct uart_port *port) { - struct uart_omap_port *up = (struct uart_omap_port *)port; - struct omap_uart_port_info *pdata = up->pdev->dev.platform_data; + struct uart_omap_port *up = to_uart_omap_port(port); - if (up->use_dma && - up->uart_dma.tx_dma_channel != OMAP_UART_DMA_CH_FREE) { - /* - * Check if dma is still active. If yes do nothing, - * return. Else stop dma - */ - if (omap_get_dma_active_status(up->uart_dma.tx_dma_channel)) - return; - omap_stop_dma(up->uart_dma.tx_dma_channel); - omap_free_dma(up->uart_dma.tx_dma_channel); - up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; - pm_runtime_mark_last_busy(&up->pdev->dev); - pm_runtime_put_autosuspend(&up->pdev->dev); - } - - pm_runtime_get_sync(&up->pdev->dev); + pm_runtime_get_sync(up->dev); if (up->ier & UART_IER_THRI) { up->ier &= ~UART_IER_THRI; serial_out(up, UART_IER, up->ier); } - if (!up->use_dma && pdata && pdata->set_forceidle) - pdata->set_forceidle(up->pdev); + serial_omap_set_forceidle(up); - pm_runtime_mark_last_busy(&up->pdev->dev); - pm_runtime_put_autosuspend(&up->pdev->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); } static void serial_omap_stop_rx(struct uart_port *port) { - struct uart_omap_port *up = (struct uart_omap_port *)port; + struct uart_omap_port *up = to_uart_omap_port(port); - pm_runtime_get_sync(&up->pdev->dev); - if (up->use_dma) - serial_omap_stop_rxdma(up); + pm_runtime_get_sync(up->dev); up->ier &= ~UART_IER_RLSI; up->port.read_status_mask &= ~UART_LSR_DR; serial_out(up, UART_IER, up->ier); - pm_runtime_mark_last_busy(&up->pdev->dev); - pm_runtime_put_autosuspend(&up->pdev->dev); -} - -static inline void receive_chars(struct uart_omap_port *up, - unsigned int *status) -{ - struct tty_struct *tty = up->port.state->port.tty; - unsigned int flag, lsr = *status; - unsigned char ch = 0; - int max_count = 256; - - do { - if (likely(lsr & UART_LSR_DR)) - ch = serial_in(up, UART_RX); - flag = TTY_NORMAL; - up->port.icount.rx++; - - if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) { - /* - * For statistics only - */ - if (lsr & UART_LSR_BI) { - lsr &= ~(UART_LSR_FE | UART_LSR_PE); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (lsr & UART_LSR_PE) { - up->port.icount.parity++; - } else if (lsr & UART_LSR_FE) { - up->port.icount.frame++; - } - - if (lsr & UART_LSR_OE) - up->port.icount.overrun++; - - /* - * Mask off conditions which should be ignored. - */ - lsr &= up->port.read_status_mask; - -#ifdef CONFIG_SERIAL_OMAP_CONSOLE - if (up->port.line == up->port.cons->index) { - /* Recover the break flag from console xmit */ - lsr |= up->lsr_break_flag; - } -#endif - if (lsr & UART_LSR_BI) - flag = TTY_BREAK; - else if (lsr & UART_LSR_PE) - flag = TTY_PARITY; - else if (lsr & UART_LSR_FE) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); -ignore_char: - lsr = serial_in(up, UART_LSR); - } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); - spin_unlock(&up->port.lock); - tty_flip_buffer_push(tty); - spin_lock(&up->port.lock); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); } -static void transmit_chars(struct uart_omap_port *up) +static void transmit_chars(struct uart_omap_port *up, unsigned int lsr) { struct circ_buf *xmit = &up->port.state->xmit; int count; + if (!(lsr & UART_LSR_THRE)) + return; + if (up->port.x_char) { serial_out(up, UART_TX, up->port.x_char); up->port.icount.tx++; @@ -290,8 +274,11 @@ static void transmit_chars(struct uart_omap_port *up) break; } while (--count > 0); - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) { + spin_unlock(&up->port.lock); uart_write_wakeup(&up->port); + spin_lock(&up->port.lock); + } if (uart_circ_empty(xmit)) serial_omap_stop_tx(&up->port); @@ -307,70 +294,13 @@ static inline void serial_omap_enable_ier_thri(struct uart_omap_port *up) static void serial_omap_start_tx(struct uart_port *port) { - struct uart_omap_port *up = (struct uart_omap_port *)port; - struct omap_uart_port_info *pdata = up->pdev->dev.platform_data; - struct circ_buf *xmit; - unsigned int start; - int ret = 0; - - if (!up->use_dma) { - pm_runtime_get_sync(&up->pdev->dev); - serial_omap_enable_ier_thri(up); - if (pdata && pdata->set_noidle) - pdata->set_noidle(up->pdev); - pm_runtime_mark_last_busy(&up->pdev->dev); - pm_runtime_put_autosuspend(&up->pdev->dev); - return; - } - - if (up->uart_dma.tx_dma_used) - return; - - xmit = &up->port.state->xmit; - - if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) { - pm_runtime_get_sync(&up->pdev->dev); - ret = omap_request_dma(up->uart_dma.uart_dma_tx, - "UART Tx DMA", - (void *)uart_tx_dma_callback, up, - &(up->uart_dma.tx_dma_channel)); + struct uart_omap_port *up = to_uart_omap_port(port); - if (ret < 0) { - serial_omap_enable_ier_thri(up); - return; - } - } - spin_lock(&(up->uart_dma.tx_lock)); - up->uart_dma.tx_dma_used = true; - spin_unlock(&(up->uart_dma.tx_lock)); - - start = up->uart_dma.tx_buf_dma_phys + - (xmit->tail & (UART_XMIT_SIZE - 1)); - - up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit); - /* - * It is a circular buffer. See if the buffer has wounded back. - * If yes it will have to be transferred in two separate dma - * transfers - */ - if (start + up->uart_dma.tx_buf_size >= - up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - up->uart_dma.tx_buf_size = - (up->uart_dma.tx_buf_dma_phys + - UART_XMIT_SIZE) - start; - - omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0, - OMAP_DMA_AMODE_CONSTANT, - up->uart_dma.uart_base, 0, 0); - omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0, - OMAP_DMA_AMODE_POST_INC, start, 0, 0); - omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel, - OMAP_DMA_DATA_TYPE_S8, - up->uart_dma.tx_buf_size, 1, - OMAP_DMA_SYNC_ELEMENT, - up->uart_dma.uart_dma_tx, 0); - /* FIXME: Cache maintenance needed here? */ - omap_start_dma(up->uart_dma.tx_dma_channel); + pm_runtime_get_sync(up->dev); + serial_omap_enable_ier_thri(up); + serial_omap_set_noidle(up); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); } static unsigned int check_modem_status(struct uart_omap_port *up) @@ -401,76 +331,158 @@ static unsigned int check_modem_status(struct uart_omap_port *up) return status; } +static void serial_omap_rlsi(struct uart_omap_port *up, unsigned int lsr) +{ + unsigned int flag; + + up->port.icount.rx++; + flag = TTY_NORMAL; + + if (lsr & UART_LSR_BI) { + flag = TTY_BREAK; + lsr &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + return; + + } + + if (lsr & UART_LSR_PE) { + flag = TTY_PARITY; + up->port.icount.parity++; + } + + if (lsr & UART_LSR_FE) { + flag = TTY_FRAME; + up->port.icount.frame++; + } + + if (lsr & UART_LSR_OE) + up->port.icount.overrun++; + +#ifdef CONFIG_SERIAL_OMAP_CONSOLE + if (up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + lsr |= up->lsr_break_flag; + } +#endif + uart_insert_char(&up->port, lsr, UART_LSR_OE, 0, flag); +} + +static void serial_omap_rdi(struct uart_omap_port *up, unsigned int lsr) +{ + unsigned char ch = 0; + unsigned int flag; + + if (!(lsr & UART_LSR_DR)) + return; + + ch = serial_in(up, UART_RX); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (uart_handle_sysrq_char(&up->port, ch)) + return; + + uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); +} + /** * serial_omap_irq() - This handles the interrupt from one port * @irq: uart port irq number * @dev_id: uart port info */ -static inline irqreturn_t serial_omap_irq(int irq, void *dev_id) +static irqreturn_t serial_omap_irq(int irq, void *dev_id) { struct uart_omap_port *up = dev_id; + struct tty_struct *tty = up->port.state->port.tty; unsigned int iir, lsr; - unsigned long flags; + unsigned int type; + irqreturn_t ret = IRQ_NONE; + int max_count = 256; - pm_runtime_get_sync(&up->pdev->dev); - iir = serial_in(up, UART_IIR); - if (iir & UART_IIR_NO_INT) { - pm_runtime_mark_last_busy(&up->pdev->dev); - pm_runtime_put_autosuspend(&up->pdev->dev); - return IRQ_NONE; - } + spin_lock(&up->port.lock); + pm_runtime_get_sync(up->dev); - spin_lock_irqsave(&up->port.lock, flags); - lsr = serial_in(up, UART_LSR); - if (iir & UART_IIR_RLSI) { - if (!up->use_dma) { - if (lsr & UART_LSR_DR) - receive_chars(up, &lsr); - } else { - up->ier &= ~(UART_IER_RDI | UART_IER_RLSI); - serial_out(up, UART_IER, up->ier); - if ((serial_omap_start_rxdma(up) != 0) && - (lsr & UART_LSR_DR)) - receive_chars(up, &lsr); + do { + iir = serial_in(up, UART_IIR); + if (iir & UART_IIR_NO_INT) + break; + + ret = IRQ_HANDLED; + lsr = serial_in(up, UART_LSR); + + /* extract IRQ type from IIR register */ + type = iir & 0x3e; + + switch (type) { + case UART_IIR_MSI: + check_modem_status(up); + break; + case UART_IIR_THRI: + transmit_chars(up, lsr); + break; + case UART_IIR_RX_TIMEOUT: + /* FALLTHROUGH */ + case UART_IIR_RDI: + serial_omap_rdi(up, lsr); + break; + case UART_IIR_RLSI: + serial_omap_rlsi(up, lsr); + break; + case UART_IIR_CTS_RTS_DSR: + /* simply try again */ + break; + case UART_IIR_XOFF: + /* FALLTHROUGH */ + default: + break; } - } + } while (!(iir & UART_IIR_NO_INT) && max_count--); - check_modem_status(up); - if ((lsr & UART_LSR_THRE) && (iir & UART_IIR_THRI)) - transmit_chars(up); + spin_unlock(&up->port.lock); - spin_unlock_irqrestore(&up->port.lock, flags); - pm_runtime_mark_last_busy(&up->pdev->dev); - pm_runtime_put_autosuspend(&up->pdev->dev); + tty_flip_buffer_push(tty); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); up->port_activity = jiffies; - return IRQ_HANDLED; + + return ret; } static unsigned int serial_omap_tx_empty(struct uart_port *port) { - struct uart_omap_port *up = (struct uart_omap_port *)port; + struct uart_omap_port *up = to_uart_omap_port(port); unsigned long flags = 0; unsigned int ret = 0; - pm_runtime_get_sync(&up->pdev->dev); + pm_runtime_get_sync(up->dev); dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->port.line); spin_lock_irqsave(&up->port.lock, flags); ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; spin_unlock_irqrestore(&up->port.lock, flags); - pm_runtime_put(&up->pdev->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); return ret; } static unsigned int serial_omap_get_mctrl(struct uart_port *port) { - struct uart_omap_port *up = (struct uart_omap_port *)port; + struct uart_omap_port *up = to_uart_omap_port(port); unsigned int status; unsigned int ret = 0; - pm_runtime_get_sync(&up->pdev->dev); + pm_runtime_get_sync(up->dev); status = check_modem_status(up); - pm_runtime_put(&up->pdev->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->port.line); @@ -487,7 +499,7 @@ static unsigned int serial_omap_get_mctrl(struct uart_port *port) static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) { - struct uart_omap_port *up = (struct uart_omap_port *)port; + struct uart_omap_port *up = to_uart_omap_port(port); unsigned char mcr = 0; dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->port.line); @@ -502,20 +514,31 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) if (mctrl & TIOCM_LOOP) mcr |= UART_MCR_LOOP; - pm_runtime_get_sync(&up->pdev->dev); + pm_runtime_get_sync(up->dev); up->mcr = serial_in(up, UART_MCR); up->mcr |= mcr; serial_out(up, UART_MCR, up->mcr); - pm_runtime_put(&up->pdev->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); + + if (gpio_is_valid(up->DTR_gpio) && + !!(mctrl & TIOCM_DTR) != up->DTR_active) { + up->DTR_active = !up->DTR_active; + if (gpio_cansleep(up->DTR_gpio)) + schedule_work(&up->qos_work); + else + gpio_set_value(up->DTR_gpio, + up->DTR_active != up->DTR_inverted); + } } static void serial_omap_break_ctl(struct uart_port *port, int break_state) { - struct uart_omap_port *up = (struct uart_omap_port *)port; + struct uart_omap_port *up = to_uart_omap_port(port); unsigned long flags = 0; dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->port.line); - pm_runtime_get_sync(&up->pdev->dev); + pm_runtime_get_sync(up->dev); spin_lock_irqsave(&up->port.lock, flags); if (break_state == -1) up->lcr |= UART_LCR_SBC; @@ -523,12 +546,13 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state) up->lcr &= ~UART_LCR_SBC; serial_out(up, UART_LCR, up->lcr); spin_unlock_irqrestore(&up->port.lock, flags); - pm_runtime_put(&up->pdev->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); } static int serial_omap_startup(struct uart_port *port) { - struct uart_omap_port *up = (struct uart_omap_port *)port; + struct uart_omap_port *up = to_uart_omap_port(port); unsigned long flags = 0; int retval; @@ -542,7 +566,7 @@ static int serial_omap_startup(struct uart_port *port) dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line); - pm_runtime_get_sync(&up->pdev->dev); + pm_runtime_get_sync(up->dev); /* * Clear the FIFO buffers and disable them. * (they will be reenabled in set_termios()) @@ -573,20 +597,6 @@ static int serial_omap_startup(struct uart_port *port) spin_unlock_irqrestore(&up->port.lock, flags); up->msr_saved_flags = 0; - if (up->use_dma) { - free_page((unsigned long)up->port.state->xmit.buf); - up->port.state->xmit.buf = dma_alloc_coherent(NULL, - UART_XMIT_SIZE, - (dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys), - 0); - init_timer(&(up->uart_dma.rx_timer)); - up->uart_dma.rx_timer.function = serial_omap_rxdma_poll; - up->uart_dma.rx_timer.data = up->port.line; - /* Currently the buffer size is 4KB. Can increase it */ - up->uart_dma.rx_buf = dma_alloc_coherent(NULL, - up->uart_dma.rx_buf_size, - (dma_addr_t *)&(up->uart_dma.rx_buf_dma_phys), 0); - } /* * Finally, enable interrupts. Note: Modem status interrupts * are set via set_termios(), which will be occurring imminently @@ -598,20 +608,20 @@ static int serial_omap_startup(struct uart_port *port) /* Enable module level wake up */ serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP); - pm_runtime_mark_last_busy(&up->pdev->dev); - pm_runtime_put_autosuspend(&up->pdev->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); up->port_activity = jiffies; return 0; } static void serial_omap_shutdown(struct uart_port *port) { - struct uart_omap_port *up = (struct uart_omap_port *)port; + struct uart_omap_port *up = to_uart_omap_port(port); unsigned long flags = 0; dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->port.line); - pm_runtime_get_sync(&up->pdev->dev); + pm_runtime_get_sync(up->dev); /* * Disable interrupts from this port */ @@ -634,19 +644,9 @@ static void serial_omap_shutdown(struct uart_port *port) */ if (serial_in(up, UART_LSR) & UART_LSR_DR) (void) serial_in(up, UART_RX); - if (up->use_dma) { - dma_free_coherent(up->port.dev, - UART_XMIT_SIZE, up->port.state->xmit.buf, - up->uart_dma.tx_buf_dma_phys); - up->port.state->xmit.buf = NULL; - serial_omap_stop_rx(port); - dma_free_coherent(up->port.dev, - up->uart_dma.rx_buf_size, up->uart_dma.rx_buf, - up->uart_dma.rx_buf_dma_phys); - up->uart_dma.rx_buf = NULL; - } - pm_runtime_put(&up->pdev->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); free_irq(up->port.irq, up); } @@ -667,19 +667,19 @@ serial_omap_configure_xonxoff /* * IXON Flag: - * Enable XON/XOFF flow control on output. - * Transmit XON1, XOFF1 + * Flow control for OMAP.TX + * OMAP.RX should listen for XON/XOFF */ if (termios->c_iflag & IXON) - up->efr |= OMAP_UART_SW_TX; + up->efr |= OMAP_UART_SW_RX; /* * IXOFF Flag: - * Enable XON/XOFF flow control on input. - * Receiver compares XON1, XOFF1. + * Flow control for OMAP.RX + * OMAP.TX should send XON/XOFF */ if (termios->c_iflag & IXOFF) - up->efr |= OMAP_UART_SW_RX; + up->efr |= OMAP_UART_SW_TX; serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); @@ -715,13 +715,16 @@ static void serial_omap_uart_qos_work(struct work_struct *work) qos_work); pm_qos_update_request(&up->pm_qos_request, up->latency); + if (gpio_is_valid(up->DTR_gpio)) + gpio_set_value_cansleep(up->DTR_gpio, + up->DTR_active != up->DTR_inverted); } static void serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - struct uart_omap_port *up = (struct uart_omap_port *)port; + struct uart_omap_port *up = to_uart_omap_port(port); unsigned char cval = 0; unsigned char efr = 0; unsigned long flags = 0; @@ -768,14 +771,12 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 | UART_FCR_ENABLE_FIFO; - if (up->use_dma) - up->fcr |= UART_FCR_DMA_SELECT; /* * Ok, we're now changing the port state. Do it with * interrupts disabled. */ - pm_runtime_get_sync(&up->pdev->dev); + pm_runtime_get_sync(up->dev); spin_lock_irqsave(&up->port.lock, flags); /* @@ -845,14 +846,13 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK; - if (up->use_dma) { - serial_out(up, UART_TI752_TLR, 0); - up->scr |= UART_FCR_TRIGGER_4; - } else { - /* Set receive FIFO threshold to 1 byte */ - up->fcr &= ~OMAP_UART_FCR_RX_FIFO_TRIG_MASK; - up->fcr |= (0x1 << OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT); - } + /* Set receive FIFO threshold to 16 characters and + * transmit FIFO threshold to 16 spaces + */ + up->fcr &= ~OMAP_UART_FCR_RX_FIFO_TRIG_MASK; + up->fcr &= ~OMAP_UART_FCR_TX_FIFO_TRIG_MASK; + up->fcr |= UART_FCR6_R_TRIGGER_16 | UART_FCR6_T_TRIGGER_24 | + UART_FCR_ENABLE_FIFO; serial_out(up, UART_FCR, up->fcr); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); @@ -924,20 +924,30 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_omap_configure_xonxoff(up, termios); spin_unlock_irqrestore(&up->port.lock, flags); - pm_runtime_put(&up->pdev->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line); } +static int serial_omap_set_wake(struct uart_port *port, unsigned int state) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + + serial_omap_enable_wakeup(up, state); + + return 0; +} + static void serial_omap_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) { - struct uart_omap_port *up = (struct uart_omap_port *)port; + struct uart_omap_port *up = to_uart_omap_port(port); unsigned char efr; dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->port.line); - pm_runtime_get_sync(&up->pdev->dev); + pm_runtime_get_sync(up->dev); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); efr = serial_in(up, UART_EFR); serial_out(up, UART_EFR, efr | UART_EFR_ECB); @@ -948,14 +958,15 @@ serial_omap_pm(struct uart_port *port, unsigned int state, serial_out(up, UART_EFR, efr); serial_out(up, UART_LCR, 0); - if (!device_may_wakeup(&up->pdev->dev)) { + if (!device_may_wakeup(up->dev)) { if (!state) - pm_runtime_forbid(&up->pdev->dev); + pm_runtime_forbid(up->dev); else - pm_runtime_allow(&up->pdev->dev); + pm_runtime_allow(up->dev); } - pm_runtime_put(&up->pdev->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); } static void serial_omap_release_port(struct uart_port *port) @@ -971,7 +982,7 @@ static int serial_omap_request_port(struct uart_port *port) static void serial_omap_config_port(struct uart_port *port, int flags) { - struct uart_omap_port *up = (struct uart_omap_port *)port; + struct uart_omap_port *up = to_uart_omap_port(port); dev_dbg(up->port.dev, "serial_omap_config_port+%d\n", up->port.line); @@ -989,7 +1000,7 @@ serial_omap_verify_port(struct uart_port *port, struct serial_struct *ser) static const char * serial_omap_type(struct uart_port *port) { - struct uart_omap_port *up = (struct uart_omap_port *)port; + struct uart_omap_port *up = to_uart_omap_port(port); dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->port.line); return up->name; @@ -1032,26 +1043,33 @@ static inline void wait_for_xmitr(struct uart_omap_port *up) static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch) { - struct uart_omap_port *up = (struct uart_omap_port *)port; + struct uart_omap_port *up = to_uart_omap_port(port); - pm_runtime_get_sync(&up->pdev->dev); + pm_runtime_get_sync(up->dev); wait_for_xmitr(up); serial_out(up, UART_TX, ch); - pm_runtime_put(&up->pdev->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); } static int serial_omap_poll_get_char(struct uart_port *port) { - struct uart_omap_port *up = (struct uart_omap_port *)port; + struct uart_omap_port *up = to_uart_omap_port(port); unsigned int status; - pm_runtime_get_sync(&up->pdev->dev); + pm_runtime_get_sync(up->dev); status = serial_in(up, UART_LSR); - if (!(status & UART_LSR_DR)) - return NO_POLL_CHAR; + if (!(status & UART_LSR_DR)) { + status = NO_POLL_CHAR; + goto out; + } status = serial_in(up, UART_RX); - pm_runtime_put(&up->pdev->dev); + +out: + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); + return status; } @@ -1065,7 +1083,7 @@ static struct uart_driver serial_omap_reg; static void serial_omap_console_putchar(struct uart_port *port, int ch) { - struct uart_omap_port *up = (struct uart_omap_port *)port; + struct uart_omap_port *up = to_uart_omap_port(port); wait_for_xmitr(up); serial_out(up, UART_TX, ch); @@ -1080,7 +1098,7 @@ serial_omap_console_write(struct console *co, const char *s, unsigned int ier; int locked = 1; - pm_runtime_get_sync(&up->pdev->dev); + pm_runtime_get_sync(up->dev); local_irq_save(flags); if (up->port.sysrq) @@ -1114,8 +1132,8 @@ serial_omap_console_write(struct console *co, const char *s, if (up->msr_saved_flags) check_modem_status(up); - pm_runtime_mark_last_busy(&up->pdev->dev); - pm_runtime_put_autosuspend(&up->pdev->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); if (locked) spin_unlock(&up->port.lock); local_irq_restore(flags); @@ -1179,6 +1197,7 @@ static struct uart_ops serial_omap_pops = { .shutdown = serial_omap_shutdown, .set_termios = serial_omap_set_termios, .pm = serial_omap_pm, + .set_wake = serial_omap_set_wake, .type = serial_omap_type, .release_port = serial_omap_release_port, .request_port = serial_omap_request_port, @@ -1221,150 +1240,7 @@ static int serial_omap_resume(struct device *dev) } #endif -static void serial_omap_rxdma_poll(unsigned long uart_no) -{ - struct uart_omap_port *up = ui[uart_no]; - unsigned int curr_dma_pos, curr_transmitted_size; - int ret = 0; - - curr_dma_pos = omap_get_dma_dst_pos(up->uart_dma.rx_dma_channel); - if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) || - (curr_dma_pos == 0)) { - if (jiffies_to_msecs(jiffies - up->port_activity) < - up->uart_dma.rx_timeout) { - mod_timer(&up->uart_dma.rx_timer, jiffies + - usecs_to_jiffies(up->uart_dma.rx_poll_rate)); - } else { - serial_omap_stop_rxdma(up); - up->ier |= (UART_IER_RDI | UART_IER_RLSI); - serial_out(up, UART_IER, up->ier); - } - return; - } - - curr_transmitted_size = curr_dma_pos - - up->uart_dma.prev_rx_dma_pos; - up->port.icount.rx += curr_transmitted_size; - tty_insert_flip_string(up->port.state->port.tty, - up->uart_dma.rx_buf + - (up->uart_dma.prev_rx_dma_pos - - up->uart_dma.rx_buf_dma_phys), - curr_transmitted_size); - tty_flip_buffer_push(up->port.state->port.tty); - up->uart_dma.prev_rx_dma_pos = curr_dma_pos; - if (up->uart_dma.rx_buf_size + - up->uart_dma.rx_buf_dma_phys == curr_dma_pos) { - ret = serial_omap_start_rxdma(up); - if (ret < 0) { - serial_omap_stop_rxdma(up); - up->ier |= (UART_IER_RDI | UART_IER_RLSI); - serial_out(up, UART_IER, up->ier); - } - } else { - mod_timer(&up->uart_dma.rx_timer, jiffies + - usecs_to_jiffies(up->uart_dma.rx_poll_rate)); - } - up->port_activity = jiffies; -} - -static void uart_rx_dma_callback(int lch, u16 ch_status, void *data) -{ - return; -} - -static int serial_omap_start_rxdma(struct uart_omap_port *up) -{ - int ret = 0; - - if (up->uart_dma.rx_dma_channel == -1) { - pm_runtime_get_sync(&up->pdev->dev); - ret = omap_request_dma(up->uart_dma.uart_dma_rx, - "UART Rx DMA", - (void *)uart_rx_dma_callback, up, - &(up->uart_dma.rx_dma_channel)); - if (ret < 0) - return ret; - - omap_set_dma_src_params(up->uart_dma.rx_dma_channel, 0, - OMAP_DMA_AMODE_CONSTANT, - up->uart_dma.uart_base, 0, 0); - omap_set_dma_dest_params(up->uart_dma.rx_dma_channel, 0, - OMAP_DMA_AMODE_POST_INC, - up->uart_dma.rx_buf_dma_phys, 0, 0); - omap_set_dma_transfer_params(up->uart_dma.rx_dma_channel, - OMAP_DMA_DATA_TYPE_S8, - up->uart_dma.rx_buf_size, 1, - OMAP_DMA_SYNC_ELEMENT, - up->uart_dma.uart_dma_rx, 0); - } - up->uart_dma.prev_rx_dma_pos = up->uart_dma.rx_buf_dma_phys; - /* FIXME: Cache maintenance needed here? */ - omap_start_dma(up->uart_dma.rx_dma_channel); - mod_timer(&up->uart_dma.rx_timer, jiffies + - usecs_to_jiffies(up->uart_dma.rx_poll_rate)); - up->uart_dma.rx_dma_used = true; - return ret; -} - -static void serial_omap_continue_tx(struct uart_omap_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - unsigned int start = up->uart_dma.tx_buf_dma_phys - + (xmit->tail & (UART_XMIT_SIZE - 1)); - - if (uart_circ_empty(xmit)) - return; - - up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit); - /* - * It is a circular buffer. See if the buffer has wounded back. - * If yes it will have to be transferred in two separate dma - * transfers - */ - if (start + up->uart_dma.tx_buf_size >= - up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - up->uart_dma.tx_buf_size = - (up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - start; - omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0, - OMAP_DMA_AMODE_CONSTANT, - up->uart_dma.uart_base, 0, 0); - omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0, - OMAP_DMA_AMODE_POST_INC, start, 0, 0); - omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel, - OMAP_DMA_DATA_TYPE_S8, - up->uart_dma.tx_buf_size, 1, - OMAP_DMA_SYNC_ELEMENT, - up->uart_dma.uart_dma_tx, 0); - /* FIXME: Cache maintenance needed here? */ - omap_start_dma(up->uart_dma.tx_dma_channel); -} - -static void uart_tx_dma_callback(int lch, u16 ch_status, void *data) -{ - struct uart_omap_port *up = (struct uart_omap_port *)data; - struct circ_buf *xmit = &up->port.state->xmit; - - xmit->tail = (xmit->tail + up->uart_dma.tx_buf_size) & \ - (UART_XMIT_SIZE - 1); - up->port.icount.tx += up->uart_dma.tx_buf_size; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - if (uart_circ_empty(xmit)) { - spin_lock(&(up->uart_dma.tx_lock)); - serial_omap_stop_tx(&up->port); - up->uart_dma.tx_dma_used = false; - spin_unlock(&(up->uart_dma.tx_lock)); - } else { - omap_stop_dma(up->uart_dma.tx_dma_channel); - serial_omap_continue_tx(up); - } - up->port_activity = jiffies; - return; -} - -static void omap_serial_fill_features_erratas(struct uart_omap_port *up) +static void __devinit omap_serial_fill_features_erratas(struct uart_omap_port *up) { u32 mvr, scheme; u16 revision, major, minor; @@ -1389,7 +1265,7 @@ static void omap_serial_fill_features_erratas(struct uart_omap_port *up) minor = (mvr & OMAP_UART_MVR_MIN_MASK); break; default: - dev_warn(&up->pdev->dev, + dev_warn(up->dev, "Unknown %s revision, defaulting to highest\n", up->name); /* highest possible revision */ @@ -1417,7 +1293,7 @@ static void omap_serial_fill_features_erratas(struct uart_omap_port *up) } } -static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev) +static __devinit struct omap_uart_port_info *of_get_uart_port_info(struct device *dev) { struct omap_uart_port_info *omap_up_info; @@ -1430,12 +1306,12 @@ static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev) return omap_up_info; } -static int serial_omap_probe(struct platform_device *pdev) +static int __devinit serial_omap_probe(struct platform_device *pdev) { struct uart_omap_port *up; - struct resource *mem, *irq, *dma_tx, *dma_rx; + struct resource *mem, *irq; struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data; - int ret = -ENOSPC; + int ret; if (pdev->dev.of_node) omap_up_info = of_get_uart_port_info(&pdev->dev); @@ -1458,19 +1334,30 @@ static int serial_omap_probe(struct platform_device *pdev) return -EBUSY; } - dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); - if (!dma_rx) - return -ENXIO; - - dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); - if (!dma_tx) - return -ENXIO; + if (gpio_is_valid(omap_up_info->DTR_gpio) && + omap_up_info->DTR_present) { + ret = gpio_request(omap_up_info->DTR_gpio, "omap-serial"); + if (ret < 0) + return ret; + ret = gpio_direction_output(omap_up_info->DTR_gpio, + omap_up_info->DTR_inverted); + if (ret < 0) + return ret; + } up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL); if (!up) return -ENOMEM; - up->pdev = pdev; + if (gpio_is_valid(omap_up_info->DTR_gpio) && + omap_up_info->DTR_present) { + up->DTR_gpio = omap_up_info->DTR_gpio; + up->DTR_inverted = omap_up_info->DTR_inverted; + } else + up->DTR_gpio = -EINVAL; + up->DTR_active = 0; + + up->dev = &pdev->dev; up->port.dev = &pdev->dev; up->port.type = PORT_OMAP; up->port.iotype = UPIO_MEM; @@ -1492,6 +1379,13 @@ static int serial_omap_probe(struct platform_device *pdev) goto err_port_line; } + up->pins = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(up->pins)) { + dev_warn(&pdev->dev, "did not get pins for uart%i error: %li\n", + up->port.line, PTR_ERR(up->pins)); + up->pins = NULL; + } + sprintf(up->name, "OMAP UART%d", up->port.line); up->port.mapbase = mem->start; up->port.membase = devm_ioremap(&pdev->dev, mem->start, @@ -1509,20 +1403,6 @@ static int serial_omap_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "No clock speed specified: using default:" "%d\n", DEFAULT_CLK_SPEED); } - up->uart_dma.uart_base = mem->start; - - if (omap_up_info->dma_enabled) { - up->uart_dma.uart_dma_tx = dma_tx->start; - up->uart_dma.uart_dma_rx = dma_rx->start; - up->use_dma = 1; - up->uart_dma.rx_buf_size = omap_up_info->dma_rx_buf_size; - up->uart_dma.rx_timeout = omap_up_info->dma_rx_timeout; - up->uart_dma.rx_poll_rate = omap_up_info->dma_rx_poll_rate; - spin_lock_init(&(up->uart_dma.tx_lock)); - spin_lock_init(&(up->uart_dma.rx_lock)); - up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; - up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; - } up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; up->calc_latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; @@ -1531,12 +1411,13 @@ static int serial_omap_probe(struct platform_device *pdev) serial_omap_uart_wq = create_singlethread_workqueue(up->name); INIT_WORK(&up->qos_work, serial_omap_uart_qos_work); + platform_set_drvdata(pdev, up); + pm_runtime_enable(&pdev->dev); pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, omap_up_info->autosuspend_timeout); pm_runtime_irq_safe(&pdev->dev); - pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); omap_serial_fill_features_erratas(up); @@ -1548,8 +1429,8 @@ static int serial_omap_probe(struct platform_device *pdev) if (ret != 0) goto err_add_port; - pm_runtime_put(&pdev->dev); - platform_set_drvdata(pdev, up); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); return 0; err_add_port: @@ -1562,17 +1443,15 @@ err_port_line: return ret; } -static int serial_omap_remove(struct platform_device *dev) +static int __devexit serial_omap_remove(struct platform_device *dev) { struct uart_omap_port *up = platform_get_drvdata(dev); - if (up) { - pm_runtime_disable(&up->pdev->dev); - uart_remove_one_port(&serial_omap_reg, &up->port); - pm_qos_remove_request(&up->pm_qos_request); - } + pm_runtime_put_sync(up->dev); + pm_runtime_disable(up->dev); + uart_remove_one_port(&serial_omap_reg, &up->port); + pm_qos_remove_request(&up->pm_qos_request); - platform_set_drvdata(dev, NULL); return 0; } @@ -1602,7 +1481,7 @@ static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1) timeout--; if (!timeout) { /* Should *never* happen. we warn and carry on */ - dev_crit(&up->pdev->dev, "Errata i202: timedout %x\n", + dev_crit(up->dev, "Errata i202: timedout %x\n", serial_in(up, UART_LSR)); break; } @@ -1648,29 +1527,23 @@ static int serial_omap_runtime_suspend(struct device *dev) if (!up) return -EINVAL; - if (!pdata || !pdata->enable_wakeup) + if (!pdata) return 0; - if (pdata->get_context_loss_count) - up->context_loss_cnt = pdata->get_context_loss_count(dev); + up->context_loss_cnt = serial_omap_get_context_loss_count(up); if (device_may_wakeup(dev)) { if (!up->wakeups_enabled) { - pdata->enable_wakeup(up->pdev, true); + serial_omap_enable_wakeup(up, true); up->wakeups_enabled = true; } } else { if (up->wakeups_enabled) { - pdata->enable_wakeup(up->pdev, false); + serial_omap_enable_wakeup(up, false); up->wakeups_enabled = false; } } - /* Errata i291 */ - if (up->use_dma && pdata->set_forceidle && - (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE)) - pdata->set_forceidle(up->pdev); - up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; schedule_work(&up->qos_work); @@ -1683,17 +1556,10 @@ static int serial_omap_runtime_resume(struct device *dev) struct omap_uart_port_info *pdata = dev->platform_data; if (up && pdata) { - if (pdata->get_context_loss_count) { - u32 loss_cnt = pdata->get_context_loss_count(dev); + u32 loss_cnt = serial_omap_get_context_loss_count(up); if (up->context_loss_cnt != loss_cnt) serial_omap_restore_context(up); - } - - /* Errata i291 */ - if (up->use_dma && pdata->set_noidle && - (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE)) - pdata->set_noidle(up->pdev); up->latency = up->calc_latency; schedule_work(&up->qos_work); @@ -1721,7 +1587,7 @@ MODULE_DEVICE_TABLE(of, omap_serial_of_match); static struct platform_driver serial_omap_driver = { .probe = serial_omap_probe, - .remove = serial_omap_remove, + .remove = __devexit_p(serial_omap_remove), .driver = { .name = DRIVER_NAME, .pm = &serial_omap_dev_pm_ops, diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 558ce8509a9a..4cd6c2381528 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -979,6 +979,10 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) priv->tx_dma_use = 1; priv->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC); + if (!priv->sg_tx_p) { + dev_err(priv->port.dev, "%s:kzalloc Failed\n", __func__); + return 0; + } sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */ sg = priv->sg_tx_p; diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c index 5847a4b855f7..9033fc6e0e4e 100644 --- a/drivers/tty/serial/pxa.c +++ b/drivers/tty/serial/pxa.c @@ -670,9 +670,19 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count) { struct uart_pxa_port *up = serial_pxa_ports[co->index]; unsigned int ier; + unsigned long flags; + int locked = 1; clk_prepare_enable(up->clk); + local_irq_save(flags); + if (up->port.sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&up->port.lock); + else + spin_lock(&up->port.lock); + /* * First save the IER then disable the interrupts */ @@ -688,6 +698,10 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count) wait_for_xmitr(up); serial_out(up, UART_IER, ier); + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); + clk_disable_unprepare(up->clk); } diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 02d07bfcfa8a..bdaa06f3ab69 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -82,7 +82,7 @@ static inline const char *s3c24xx_serial_portname(struct uart_port *port) static int s3c24xx_serial_txempty_nofifo(struct uart_port *port) { - return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE); + return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE; } /* @@ -268,7 +268,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id) dbg("break!\n"); port->icount.brk++; if (uart_handle_break(port)) - goto ignore_char; + goto ignore_char; } if (uerstat & S3C2410_UERSTAT_FRAME) @@ -459,7 +459,7 @@ static int s3c24xx_serial_startup(struct uart_port *port) s3c24xx_serial_portname(port), ourport); if (ret != 0) { - printk(KERN_ERR "cannot get irq %d\n", ourport->rx_irq); + dev_err(port->dev, "cannot get irq %d\n", ourport->rx_irq); return ret; } @@ -473,7 +473,7 @@ static int s3c24xx_serial_startup(struct uart_port *port) s3c24xx_serial_portname(port), ourport); if (ret) { - printk(KERN_ERR "cannot get irq %d\n", ourport->tx_irq); + dev_err(port->dev, "cannot get irq %d\n", ourport->tx_irq); goto err; } @@ -502,7 +502,7 @@ static int s3c64xx_serial_startup(struct uart_port *port) ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED, s3c24xx_serial_portname(port), ourport); if (ret) { - printk(KERN_ERR "cannot get irq %d\n", port->irq); + dev_err(port->dev, "cannot get irq %d\n", port->irq); return ret; } @@ -529,7 +529,7 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, switch (level) { case 3: - if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL) + if (!IS_ERR(ourport->baudclk)) clk_disable(ourport->baudclk); clk_disable(ourport->clk); @@ -538,12 +538,12 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, case 0: clk_enable(ourport->clk); - if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL) + if (!IS_ERR(ourport->baudclk)) clk_enable(ourport->baudclk); break; default: - printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level); + dev_err(port->dev, "s3c24xx_serial: unknown pm %d\n", level); } } @@ -604,7 +604,6 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport, char clkname[MAX_CLK_NAME_LENGTH]; int calc_deviation, deviation = (1 << 30) - 1; - *best_clk = NULL; clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel : ourport->info->def_clk_sel; for (cnt = 0; cnt < info->num_clks; cnt++) { @@ -613,7 +612,7 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport, sprintf(clkname, "clk_uart_baud%d", cnt); clk = clk_get(ourport->port.dev, clkname); - if (IS_ERR_OR_NULL(clk)) + if (IS_ERR(clk)) continue; rate = clk_get_rate(clk); @@ -684,7 +683,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, { struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); struct s3c24xx_uart_port *ourport = to_ourport(port); - struct clk *clk = NULL; + struct clk *clk = ERR_PTR(-EINVAL); unsigned long flags; unsigned int baud, quot, clk_sel = 0; unsigned int ulcon; @@ -705,7 +704,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel); if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) quot = port->custom_divisor; - if (!clk) + if (IS_ERR(clk)) return; /* check to see if we need to change clock source */ @@ -713,9 +712,9 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, if (ourport->baudclk != clk) { s3c24xx_serial_setsource(port, clk_sel); - if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { + if (!IS_ERR(ourport->baudclk)) { clk_disable(ourport->baudclk); - ourport->baudclk = NULL; + ourport->baudclk = ERR_PTR(-EINVAL); } clk_enable(clk); @@ -1036,10 +1035,10 @@ static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb, if (tty == NULL) goto exit; - termios = tty->termios; + termios = &tty->termios; if (termios == NULL) { - printk(KERN_WARNING "%s: no termios?\n", __func__); + dev_warn(uport->dev, "%s: no termios?\n", __func__); goto exit; } @@ -1114,7 +1113,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, res = platform_get_resource(platdev, IORESOURCE_MEM, 0); if (res == NULL) { - printk(KERN_ERR "failed to find memory resource for uart\n"); + dev_err(port->dev, "failed to find memory resource for uart\n"); return -EINVAL; } @@ -1130,7 +1129,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, ourport->rx_irq = ret; ourport->tx_irq = ret + 1; } - + ret = platform_get_irq(platdev, 1); if (ret > 0) ourport->tx_irq = ret; @@ -1160,7 +1159,11 @@ static ssize_t s3c24xx_serial_show_clksrc(struct device *dev, struct uart_port *port = s3c24xx_dev_to_port(dev); struct s3c24xx_uart_port *ourport = to_ourport(port); - return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->baudclk->name); + if (IS_ERR(ourport->baudclk)) + return -EINVAL; + + return snprintf(buf, PAGE_SIZE, "* %s\n", + ourport->baudclk->name ?: "(null)"); } static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL); @@ -1200,6 +1203,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev) return -ENODEV; } + ourport->baudclk = ERR_PTR(-EINVAL); ourport->info = ourport->drv_data->info; ourport->cfg = (pdev->dev.platform_data) ? (struct s3c2410_uartcfg *)pdev->dev.platform_data : @@ -1387,7 +1391,7 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud, sprintf(clk_name, "clk_uart_baud%d", clk_sel); clk = clk_get(port->dev, clk_name); - if (!IS_ERR(clk) && clk != NULL) + if (!IS_ERR(clk)) rate = clk_get_rate(clk); else rate = 1; @@ -1679,7 +1683,7 @@ static int __init s3c24xx_serial_modinit(void) ret = uart_register_driver(&s3c24xx_uart_drv); if (ret < 0) { - printk(KERN_ERR "failed to register UART driver\n"); + pr_err("Failed to register Samsung UART driver\n"); return -1; } diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c index e0b4b0a30a5a..9d664242b312 100644 --- a/drivers/tty/serial/sc26xx.c +++ b/drivers/tty/serial/sc26xx.c @@ -20,6 +20,10 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/irq.h> +#include <linux/io.h> + +#warning "Please try migrate to use new driver SCCNXP and report the status" \ + "in the linux-serial mailing list." #if defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c new file mode 100644 index 000000000000..05d767cf82a7 --- /dev/null +++ b/drivers/tty/serial/sccnxp.c @@ -0,0 +1,985 @@ +/* + * NXP (Philips) SCC+++(SCN+++) serial driver + * + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * + * Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#if defined(CONFIG_SERIAL_SCCNXP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/console.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/io.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/platform_device.h> +#include <linux/platform_data/sccnxp.h> + +#define SCCNXP_NAME "uart-sccnxp" +#define SCCNXP_MAJOR 204 +#define SCCNXP_MINOR 205 + +#define SCCNXP_MR_REG (0x00) +# define MR0_BAUD_NORMAL (0 << 0) +# define MR0_BAUD_EXT1 (1 << 0) +# define MR0_BAUD_EXT2 (5 << 0) +# define MR0_FIFO (1 << 3) +# define MR0_TXLVL (1 << 4) +# define MR1_BITS_5 (0 << 0) +# define MR1_BITS_6 (1 << 0) +# define MR1_BITS_7 (2 << 0) +# define MR1_BITS_8 (3 << 0) +# define MR1_PAR_EVN (0 << 2) +# define MR1_PAR_ODD (1 << 2) +# define MR1_PAR_NO (4 << 2) +# define MR2_STOP1 (7 << 0) +# define MR2_STOP2 (0xf << 0) +#define SCCNXP_SR_REG (0x01) +#define SCCNXP_CSR_REG SCCNXP_SR_REG +# define SR_RXRDY (1 << 0) +# define SR_FULL (1 << 1) +# define SR_TXRDY (1 << 2) +# define SR_TXEMT (1 << 3) +# define SR_OVR (1 << 4) +# define SR_PE (1 << 5) +# define SR_FE (1 << 6) +# define SR_BRK (1 << 7) +#define SCCNXP_CR_REG (0x02) +# define CR_RX_ENABLE (1 << 0) +# define CR_RX_DISABLE (1 << 1) +# define CR_TX_ENABLE (1 << 2) +# define CR_TX_DISABLE (1 << 3) +# define CR_CMD_MRPTR1 (0x01 << 4) +# define CR_CMD_RX_RESET (0x02 << 4) +# define CR_CMD_TX_RESET (0x03 << 4) +# define CR_CMD_STATUS_RESET (0x04 << 4) +# define CR_CMD_BREAK_RESET (0x05 << 4) +# define CR_CMD_START_BREAK (0x06 << 4) +# define CR_CMD_STOP_BREAK (0x07 << 4) +# define CR_CMD_MRPTR0 (0x0b << 4) +#define SCCNXP_RHR_REG (0x03) +#define SCCNXP_THR_REG SCCNXP_RHR_REG +#define SCCNXP_IPCR_REG (0x04) +#define SCCNXP_ACR_REG SCCNXP_IPCR_REG +# define ACR_BAUD0 (0 << 7) +# define ACR_BAUD1 (1 << 7) +# define ACR_TIMER_MODE (6 << 4) +#define SCCNXP_ISR_REG (0x05) +#define SCCNXP_IMR_REG SCCNXP_ISR_REG +# define IMR_TXRDY (1 << 0) +# define IMR_RXRDY (1 << 1) +# define ISR_TXRDY(x) (1 << ((x * 4) + 0)) +# define ISR_RXRDY(x) (1 << ((x * 4) + 1)) +#define SCCNXP_IPR_REG (0x0d) +#define SCCNXP_OPCR_REG SCCNXP_IPR_REG +#define SCCNXP_SOP_REG (0x0e) +#define SCCNXP_ROP_REG (0x0f) + +/* Route helpers */ +#define MCTRL_MASK(sig) (0xf << (sig)) +#define MCTRL_IBIT(cfg, sig) ((((cfg) >> (sig)) & 0xf) - LINE_IP0) +#define MCTRL_OBIT(cfg, sig) ((((cfg) >> (sig)) & 0xf) - LINE_OP0) + +/* Supported chip types */ +enum { + SCCNXP_TYPE_SC2681 = 2681, + SCCNXP_TYPE_SC2691 = 2691, + SCCNXP_TYPE_SC2692 = 2692, + SCCNXP_TYPE_SC2891 = 2891, + SCCNXP_TYPE_SC2892 = 2892, + SCCNXP_TYPE_SC28202 = 28202, + SCCNXP_TYPE_SC68681 = 68681, + SCCNXP_TYPE_SC68692 = 68692, +}; + +struct sccnxp_port { + struct uart_driver uart; + struct uart_port port[SCCNXP_MAX_UARTS]; + + const char *name; + int irq; + + u8 imr; + u8 addr_mask; + int freq_std; + + int flags; +#define SCCNXP_HAVE_IO 0x00000001 +#define SCCNXP_HAVE_MR0 0x00000002 + +#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE + struct console console; +#endif + + struct mutex sccnxp_mutex; + + struct sccnxp_pdata pdata; +}; + +static inline u8 sccnxp_raw_read(void __iomem *base, u8 reg, u8 shift) +{ + return readb(base + (reg << shift)); +} + +static inline void sccnxp_raw_write(void __iomem *base, u8 reg, u8 shift, u8 v) +{ + writeb(v, base + (reg << shift)); +} + +static inline u8 sccnxp_read(struct uart_port *port, u8 reg) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + return sccnxp_raw_read(port->membase, reg & s->addr_mask, + port->regshift); +} + +static inline void sccnxp_write(struct uart_port *port, u8 reg, u8 v) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + sccnxp_raw_write(port->membase, reg & s->addr_mask, port->regshift, v); +} + +static inline u8 sccnxp_port_read(struct uart_port *port, u8 reg) +{ + return sccnxp_read(port, (port->line << 3) + reg); +} + +static inline void sccnxp_port_write(struct uart_port *port, u8 reg, u8 v) +{ + sccnxp_write(port, (port->line << 3) + reg, v); +} + +static int sccnxp_update_best_err(int a, int b, int *besterr) +{ + int err = abs(a - b); + + if ((*besterr < 0) || (*besterr > err)) { + *besterr = err; + return 0; + } + + return 1; +} + +struct baud_table { + u8 csr; + u8 acr; + u8 mr0; + int baud; +}; + +const struct baud_table baud_std[] = { + { 0, ACR_BAUD0, MR0_BAUD_NORMAL, 50, }, + { 0, ACR_BAUD1, MR0_BAUD_NORMAL, 75, }, + { 1, ACR_BAUD0, MR0_BAUD_NORMAL, 110, }, + { 2, ACR_BAUD0, MR0_BAUD_NORMAL, 134, }, + { 3, ACR_BAUD1, MR0_BAUD_NORMAL, 150, }, + { 3, ACR_BAUD0, MR0_BAUD_NORMAL, 200, }, + { 4, ACR_BAUD0, MR0_BAUD_NORMAL, 300, }, + { 0, ACR_BAUD1, MR0_BAUD_EXT1, 450, }, + { 1, ACR_BAUD0, MR0_BAUD_EXT2, 880, }, + { 3, ACR_BAUD1, MR0_BAUD_EXT1, 900, }, + { 5, ACR_BAUD0, MR0_BAUD_NORMAL, 600, }, + { 7, ACR_BAUD0, MR0_BAUD_NORMAL, 1050, }, + { 2, ACR_BAUD0, MR0_BAUD_EXT2, 1076, }, + { 6, ACR_BAUD0, MR0_BAUD_NORMAL, 1200, }, + { 10, ACR_BAUD1, MR0_BAUD_NORMAL, 1800, }, + { 7, ACR_BAUD1, MR0_BAUD_NORMAL, 2000, }, + { 8, ACR_BAUD0, MR0_BAUD_NORMAL, 2400, }, + { 5, ACR_BAUD1, MR0_BAUD_EXT1, 3600, }, + { 9, ACR_BAUD0, MR0_BAUD_NORMAL, 4800, }, + { 10, ACR_BAUD0, MR0_BAUD_NORMAL, 7200, }, + { 11, ACR_BAUD0, MR0_BAUD_NORMAL, 9600, }, + { 8, ACR_BAUD0, MR0_BAUD_EXT1, 14400, }, + { 12, ACR_BAUD1, MR0_BAUD_NORMAL, 19200, }, + { 9, ACR_BAUD0, MR0_BAUD_EXT1, 28800, }, + { 12, ACR_BAUD0, MR0_BAUD_NORMAL, 38400, }, + { 11, ACR_BAUD0, MR0_BAUD_EXT1, 57600, }, + { 12, ACR_BAUD1, MR0_BAUD_EXT1, 115200, }, + { 12, ACR_BAUD0, MR0_BAUD_EXT1, 230400, }, + { 0, 0, 0, 0 } +}; + +static void sccnxp_set_baud(struct uart_port *port, int baud) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + int div_std, tmp_baud, bestbaud = baud, besterr = -1; + u8 i, acr = 0, csr = 0, mr0 = 0; + + /* Find best baud from table */ + for (i = 0; baud_std[i].baud && besterr; i++) { + if (baud_std[i].mr0 && !(s->flags & SCCNXP_HAVE_MR0)) + continue; + div_std = DIV_ROUND_CLOSEST(s->freq_std, baud_std[i].baud); + tmp_baud = DIV_ROUND_CLOSEST(port->uartclk, div_std); + if (!sccnxp_update_best_err(baud, tmp_baud, &besterr)) { + acr = baud_std[i].acr; + csr = baud_std[i].csr; + mr0 = baud_std[i].mr0; + bestbaud = tmp_baud; + } + } + + if (s->flags & SCCNXP_HAVE_MR0) { + /* Enable FIFO, set half level for TX */ + mr0 |= MR0_FIFO | MR0_TXLVL; + /* Update MR0 */ + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_MRPTR0); + sccnxp_port_write(port, SCCNXP_MR_REG, mr0); + } + + sccnxp_port_write(port, SCCNXP_ACR_REG, acr | ACR_TIMER_MODE); + sccnxp_port_write(port, SCCNXP_CSR_REG, (csr << 4) | csr); + + dev_dbg(port->dev, "Baudrate desired: %i, calculated: %i\n", + baud, bestbaud); +} + +static void sccnxp_enable_irq(struct uart_port *port, int mask) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + s->imr |= mask << (port->line * 4); + sccnxp_write(port, SCCNXP_IMR_REG, s->imr); +} + +static void sccnxp_disable_irq(struct uart_port *port, int mask) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + s->imr &= ~(mask << (port->line * 4)); + sccnxp_write(port, SCCNXP_IMR_REG, s->imr); +} + +static void sccnxp_set_bit(struct uart_port *port, int sig, int state) +{ + u8 bitmask; + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(sig)) { + bitmask = 1 << MCTRL_OBIT(s->pdata.mctrl_cfg[port->line], sig); + if (state) + sccnxp_write(port, SCCNXP_SOP_REG, bitmask); + else + sccnxp_write(port, SCCNXP_ROP_REG, bitmask); + } +} + +static void sccnxp_handle_rx(struct uart_port *port) +{ + u8 sr; + unsigned int ch, flag; + struct tty_struct *tty = tty_port_tty_get(&port->state->port); + + if (!tty) + return; + + for (;;) { + sr = sccnxp_port_read(port, SCCNXP_SR_REG); + if (!(sr & SR_RXRDY)) + break; + sr &= SR_PE | SR_FE | SR_OVR | SR_BRK; + + ch = sccnxp_port_read(port, SCCNXP_RHR_REG); + + port->icount.rx++; + flag = TTY_NORMAL; + + if (unlikely(sr)) { + if (sr & SR_BRK) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (sr & SR_PE) + port->icount.parity++; + else if (sr & SR_FE) + port->icount.frame++; + else if (sr & SR_OVR) + port->icount.overrun++; + + sr &= port->read_status_mask; + if (sr & SR_BRK) + flag = TTY_BREAK; + else if (sr & SR_PE) + flag = TTY_PARITY; + else if (sr & SR_FE) + flag = TTY_FRAME; + else if (sr & SR_OVR) + flag = TTY_OVERRUN; + } + + if (uart_handle_sysrq_char(port, ch)) + continue; + + if (sr & port->ignore_status_mask) + continue; + + uart_insert_char(port, sr, SR_OVR, ch, flag); + } + + tty_flip_buffer_push(tty); + + tty_kref_put(tty); +} + +static void sccnxp_handle_tx(struct uart_port *port) +{ + u8 sr; + struct circ_buf *xmit = &port->state->xmit; + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + if (unlikely(port->x_char)) { + sccnxp_port_write(port, SCCNXP_THR_REG, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + /* Disable TX if FIFO is empty */ + if (sccnxp_port_read(port, SCCNXP_SR_REG) & SR_TXEMT) { + sccnxp_disable_irq(port, IMR_TXRDY); + + /* Set direction to input */ + if (s->flags & SCCNXP_HAVE_IO) + sccnxp_set_bit(port, DIR_OP, 0); + } + return; + } + + while (!uart_circ_empty(xmit)) { + sr = sccnxp_port_read(port, SCCNXP_SR_REG); + if (!(sr & SR_TXRDY)) + break; + + sccnxp_port_write(port, SCCNXP_THR_REG, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static irqreturn_t sccnxp_ist(int irq, void *dev_id) +{ + int i; + u8 isr; + struct sccnxp_port *s = (struct sccnxp_port *)dev_id; + + mutex_lock(&s->sccnxp_mutex); + + for (;;) { + isr = sccnxp_read(&s->port[0], SCCNXP_ISR_REG); + isr &= s->imr; + if (!isr) + break; + + dev_dbg(s->port[0].dev, "IRQ status: 0x%02x\n", isr); + + for (i = 0; i < s->uart.nr; i++) { + if (isr & ISR_RXRDY(i)) + sccnxp_handle_rx(&s->port[i]); + if (isr & ISR_TXRDY(i)) + sccnxp_handle_tx(&s->port[i]); + } + } + + mutex_unlock(&s->sccnxp_mutex); + + return IRQ_HANDLED; +} + +static void sccnxp_start_tx(struct uart_port *port) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + mutex_lock(&s->sccnxp_mutex); + + /* Set direction to output */ + if (s->flags & SCCNXP_HAVE_IO) + sccnxp_set_bit(port, DIR_OP, 1); + + sccnxp_enable_irq(port, IMR_TXRDY); + + mutex_unlock(&s->sccnxp_mutex); +} + +static void sccnxp_stop_tx(struct uart_port *port) +{ + /* Do nothing */ +} + +static void sccnxp_stop_rx(struct uart_port *port) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + mutex_lock(&s->sccnxp_mutex); + sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_DISABLE); + mutex_unlock(&s->sccnxp_mutex); +} + +static unsigned int sccnxp_tx_empty(struct uart_port *port) +{ + u8 val; + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + mutex_lock(&s->sccnxp_mutex); + val = sccnxp_port_read(port, SCCNXP_SR_REG); + mutex_unlock(&s->sccnxp_mutex); + + return (val & SR_TXEMT) ? TIOCSER_TEMT : 0; +} + +static void sccnxp_enable_ms(struct uart_port *port) +{ + /* Do nothing */ +} + +static void sccnxp_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + if (!(s->flags & SCCNXP_HAVE_IO)) + return; + + mutex_lock(&s->sccnxp_mutex); + + sccnxp_set_bit(port, DTR_OP, mctrl & TIOCM_DTR); + sccnxp_set_bit(port, RTS_OP, mctrl & TIOCM_RTS); + + mutex_unlock(&s->sccnxp_mutex); +} + +static unsigned int sccnxp_get_mctrl(struct uart_port *port) +{ + u8 bitmask, ipr; + struct sccnxp_port *s = dev_get_drvdata(port->dev); + unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR; + + if (!(s->flags & SCCNXP_HAVE_IO)) + return mctrl; + + mutex_lock(&s->sccnxp_mutex); + + ipr = ~sccnxp_read(port, SCCNXP_IPCR_REG); + + if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(DSR_IP)) { + bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line], + DSR_IP); + mctrl &= ~TIOCM_DSR; + mctrl |= (ipr & bitmask) ? TIOCM_DSR : 0; + } + if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(CTS_IP)) { + bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line], + CTS_IP); + mctrl &= ~TIOCM_CTS; + mctrl |= (ipr & bitmask) ? TIOCM_CTS : 0; + } + if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(DCD_IP)) { + bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line], + DCD_IP); + mctrl &= ~TIOCM_CAR; + mctrl |= (ipr & bitmask) ? TIOCM_CAR : 0; + } + if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(RNG_IP)) { + bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line], + RNG_IP); + mctrl &= ~TIOCM_RNG; + mctrl |= (ipr & bitmask) ? TIOCM_RNG : 0; + } + + mutex_unlock(&s->sccnxp_mutex); + + return mctrl; +} + +static void sccnxp_break_ctl(struct uart_port *port, int break_state) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + mutex_lock(&s->sccnxp_mutex); + sccnxp_port_write(port, SCCNXP_CR_REG, break_state ? + CR_CMD_START_BREAK : CR_CMD_STOP_BREAK); + mutex_unlock(&s->sccnxp_mutex); +} + +static void sccnxp_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + u8 mr1, mr2; + int baud; + + mutex_lock(&s->sccnxp_mutex); + + /* Mask termios capabilities we don't support */ + termios->c_cflag &= ~CMSPAR; + termios->c_iflag &= ~(IXON | IXOFF | IXANY); + + /* Disable RX & TX, reset break condition, status and FIFOs */ + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_RX_RESET | + CR_RX_DISABLE | CR_TX_DISABLE); + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_TX_RESET); + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_STATUS_RESET); + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_BREAK_RESET); + + /* Word size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + mr1 = MR1_BITS_5; + break; + case CS6: + mr1 = MR1_BITS_6; + break; + case CS7: + mr1 = MR1_BITS_7; + break; + default: + case CS8: + mr1 = MR1_BITS_8; + break; + } + + /* Parity */ + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & PARODD) + mr1 |= MR1_PAR_ODD; + } else + mr1 |= MR1_PAR_NO; + + /* Stop bits */ + mr2 = (termios->c_cflag & CSTOPB) ? MR2_STOP2 : MR2_STOP1; + + /* Update desired format */ + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_MRPTR1); + sccnxp_port_write(port, SCCNXP_MR_REG, mr1); + sccnxp_port_write(port, SCCNXP_MR_REG, mr2); + + /* Set read status mask */ + port->read_status_mask = SR_OVR; + if (termios->c_iflag & INPCK) + port->read_status_mask |= SR_PE | SR_FE; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= SR_BRK; + + /* Set status ignore mask */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNBRK) + port->ignore_status_mask |= SR_BRK; + if (!(termios->c_cflag & CREAD)) + port->ignore_status_mask |= SR_PE | SR_OVR | SR_FE | SR_BRK; + + /* Setup baudrate */ + baud = uart_get_baud_rate(port, termios, old, 50, + (s->flags & SCCNXP_HAVE_MR0) ? + 230400 : 38400); + sccnxp_set_baud(port, baud); + + /* Update timeout according to new baud rate */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* Enable RX & TX */ + sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_ENABLE | CR_TX_ENABLE); + + mutex_unlock(&s->sccnxp_mutex); +} + +static int sccnxp_startup(struct uart_port *port) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + mutex_lock(&s->sccnxp_mutex); + + if (s->flags & SCCNXP_HAVE_IO) { + /* Outputs are controlled manually */ + sccnxp_write(port, SCCNXP_OPCR_REG, 0); + } + + /* Reset break condition, status and FIFOs */ + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_RX_RESET); + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_TX_RESET); + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_STATUS_RESET); + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_BREAK_RESET); + + /* Enable RX & TX */ + sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_ENABLE | CR_TX_ENABLE); + + /* Enable RX interrupt */ + sccnxp_enable_irq(port, IMR_RXRDY); + + mutex_unlock(&s->sccnxp_mutex); + + return 0; +} + +static void sccnxp_shutdown(struct uart_port *port) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + mutex_lock(&s->sccnxp_mutex); + + /* Disable interrupts */ + sccnxp_disable_irq(port, IMR_TXRDY | IMR_RXRDY); + + /* Disable TX & RX */ + sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_DISABLE | CR_TX_DISABLE); + + /* Leave direction to input */ + if (s->flags & SCCNXP_HAVE_IO) + sccnxp_set_bit(port, DIR_OP, 0); + + mutex_unlock(&s->sccnxp_mutex); +} + +static const char *sccnxp_type(struct uart_port *port) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + return (port->type == PORT_SC26XX) ? s->name : NULL; +} + +static void sccnxp_release_port(struct uart_port *port) +{ + /* Do nothing */ +} + +static int sccnxp_request_port(struct uart_port *port) +{ + /* Do nothing */ + return 0; +} + +static void sccnxp_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_SC26XX; +} + +static int sccnxp_verify_port(struct uart_port *port, struct serial_struct *s) +{ + if ((s->type == PORT_UNKNOWN) || (s->type == PORT_SC26XX)) + return 0; + if (s->irq == port->irq) + return 0; + + return -EINVAL; +} + +static const struct uart_ops sccnxp_ops = { + .tx_empty = sccnxp_tx_empty, + .set_mctrl = sccnxp_set_mctrl, + .get_mctrl = sccnxp_get_mctrl, + .stop_tx = sccnxp_stop_tx, + .start_tx = sccnxp_start_tx, + .stop_rx = sccnxp_stop_rx, + .enable_ms = sccnxp_enable_ms, + .break_ctl = sccnxp_break_ctl, + .startup = sccnxp_startup, + .shutdown = sccnxp_shutdown, + .set_termios = sccnxp_set_termios, + .type = sccnxp_type, + .release_port = sccnxp_release_port, + .request_port = sccnxp_request_port, + .config_port = sccnxp_config_port, + .verify_port = sccnxp_verify_port, +}; + +#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE +static void sccnxp_console_putchar(struct uart_port *port, int c) +{ + int tryes = 100000; + + while (tryes--) { + if (sccnxp_port_read(port, SCCNXP_SR_REG) & SR_TXRDY) { + sccnxp_port_write(port, SCCNXP_THR_REG, c); + break; + } + barrier(); + } +} + +static void sccnxp_console_write(struct console *co, const char *c, unsigned n) +{ + struct sccnxp_port *s = (struct sccnxp_port *)co->data; + struct uart_port *port = &s->port[co->index]; + + mutex_lock(&s->sccnxp_mutex); + uart_console_write(port, c, n, sccnxp_console_putchar); + mutex_unlock(&s->sccnxp_mutex); +} + +static int sccnxp_console_setup(struct console *co, char *options) +{ + struct sccnxp_port *s = (struct sccnxp_port *)co->data; + struct uart_port *port = &s->port[(co->index > 0) ? co->index : 0]; + int baud = 9600, bits = 8, parity = 'n', flow = 'n'; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} +#endif + +static int __devinit sccnxp_probe(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + int chiptype = pdev->id_entry->driver_data; + struct sccnxp_pdata *pdata = dev_get_platdata(&pdev->dev); + int i, ret, fifosize, freq_min, freq_max; + struct sccnxp_port *s; + void __iomem *membase; + + if (!res) { + dev_err(&pdev->dev, "Missing memory resource data\n"); + return -EADDRNOTAVAIL; + } + + dev_set_name(&pdev->dev, SCCNXP_NAME); + + s = devm_kzalloc(&pdev->dev, sizeof(struct sccnxp_port), GFP_KERNEL); + if (!s) { + dev_err(&pdev->dev, "Error allocating port structure\n"); + return -ENOMEM; + } + platform_set_drvdata(pdev, s); + + mutex_init(&s->sccnxp_mutex); + + /* Individual chip settings */ + switch (chiptype) { + case SCCNXP_TYPE_SC2681: + s->name = "SC2681"; + s->uart.nr = 2; + s->freq_std = 3686400; + s->addr_mask = 0x0f; + s->flags = SCCNXP_HAVE_IO; + fifosize = 3; + freq_min = 1000000; + freq_max = 4000000; + break; + case SCCNXP_TYPE_SC2691: + s->name = "SC2691"; + s->uart.nr = 1; + s->freq_std = 3686400; + s->addr_mask = 0x07; + s->flags = 0; + fifosize = 3; + freq_min = 1000000; + freq_max = 4000000; + break; + case SCCNXP_TYPE_SC2692: + s->name = "SC2692"; + s->uart.nr = 2; + s->freq_std = 3686400; + s->addr_mask = 0x0f; + s->flags = SCCNXP_HAVE_IO; + fifosize = 3; + freq_min = 1000000; + freq_max = 4000000; + break; + case SCCNXP_TYPE_SC2891: + s->name = "SC2891"; + s->uart.nr = 1; + s->freq_std = 3686400; + s->addr_mask = 0x0f; + s->flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0; + fifosize = 16; + freq_min = 100000; + freq_max = 8000000; + break; + case SCCNXP_TYPE_SC2892: + s->name = "SC2892"; + s->uart.nr = 2; + s->freq_std = 3686400; + s->addr_mask = 0x0f; + s->flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0; + fifosize = 16; + freq_min = 100000; + freq_max = 8000000; + break; + case SCCNXP_TYPE_SC28202: + s->name = "SC28202"; + s->uart.nr = 2; + s->freq_std = 14745600; + s->addr_mask = 0x7f; + s->flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0; + fifosize = 256; + freq_min = 1000000; + freq_max = 50000000; + break; + case SCCNXP_TYPE_SC68681: + s->name = "SC68681"; + s->uart.nr = 2; + s->freq_std = 3686400; + s->addr_mask = 0x0f; + s->flags = SCCNXP_HAVE_IO; + fifosize = 3; + freq_min = 1000000; + freq_max = 4000000; + break; + case SCCNXP_TYPE_SC68692: + s->name = "SC68692"; + s->uart.nr = 2; + s->freq_std = 3686400; + s->addr_mask = 0x0f; + s->flags = SCCNXP_HAVE_IO; + fifosize = 3; + freq_min = 1000000; + freq_max = 4000000; + break; + default: + dev_err(&pdev->dev, "Unsupported chip type %i\n", chiptype); + ret = -ENOTSUPP; + goto err_out; + } + + if (!pdata) { + dev_warn(&pdev->dev, + "No platform data supplied, using defaults\n"); + s->pdata.frequency = s->freq_std; + } else + memcpy(&s->pdata, pdata, sizeof(struct sccnxp_pdata)); + + s->irq = platform_get_irq(pdev, 0); + if (s->irq <= 0) { + dev_err(&pdev->dev, "Missing irq resource data\n"); + ret = -ENXIO; + goto err_out; + } + + /* Check input frequency */ + if ((s->pdata.frequency < freq_min) || + (s->pdata.frequency > freq_max)) { + dev_err(&pdev->dev, "Frequency out of bounds\n"); + ret = -EINVAL; + goto err_out; + } + + membase = devm_request_and_ioremap(&pdev->dev, res); + if (!membase) { + dev_err(&pdev->dev, "Failed to ioremap\n"); + ret = -EIO; + goto err_out; + } + + s->uart.owner = THIS_MODULE; + s->uart.dev_name = "ttySC"; + s->uart.major = SCCNXP_MAJOR; + s->uart.minor = SCCNXP_MINOR; +#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE + s->uart.cons = &s->console; + s->uart.cons->device = uart_console_device; + s->uart.cons->write = sccnxp_console_write; + s->uart.cons->setup = sccnxp_console_setup; + s->uart.cons->flags = CON_PRINTBUFFER; + s->uart.cons->index = -1; + s->uart.cons->data = s; + strcpy(s->uart.cons->name, "ttySC"); +#endif + ret = uart_register_driver(&s->uart); + if (ret) { + dev_err(&pdev->dev, "Registering UART driver failed\n"); + goto err_out; + } + + for (i = 0; i < s->uart.nr; i++) { + s->port[i].line = i; + s->port[i].dev = &pdev->dev; + s->port[i].irq = s->irq; + s->port[i].type = PORT_SC26XX; + s->port[i].fifosize = fifosize; + s->port[i].flags = UPF_SKIP_TEST | UPF_FIXED_TYPE; + s->port[i].iotype = UPIO_MEM; + s->port[i].mapbase = res->start; + s->port[i].membase = membase; + s->port[i].regshift = s->pdata.reg_shift; + s->port[i].uartclk = s->pdata.frequency; + s->port[i].ops = &sccnxp_ops; + uart_add_one_port(&s->uart, &s->port[i]); + /* Set direction to input */ + if (s->flags & SCCNXP_HAVE_IO) + sccnxp_set_bit(&s->port[i], DIR_OP, 0); + } + + /* Disable interrupts */ + s->imr = 0; + sccnxp_write(&s->port[0], SCCNXP_IMR_REG, 0); + + /* Board specific configure */ + if (s->pdata.init) + s->pdata.init(); + + ret = devm_request_threaded_irq(&pdev->dev, s->irq, NULL, sccnxp_ist, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + dev_name(&pdev->dev), s); + if (!ret) + return 0; + + dev_err(&pdev->dev, "Unable to reguest IRQ %i\n", s->irq); + +err_out: + platform_set_drvdata(pdev, NULL); + + return ret; +} + +static int __devexit sccnxp_remove(struct platform_device *pdev) +{ + int i; + struct sccnxp_port *s = platform_get_drvdata(pdev); + + devm_free_irq(&pdev->dev, s->irq, s); + + for (i = 0; i < s->uart.nr; i++) + uart_remove_one_port(&s->uart, &s->port[i]); + + uart_unregister_driver(&s->uart); + platform_set_drvdata(pdev, NULL); + + if (s->pdata.exit) + s->pdata.exit(); + + return 0; +} + +static const struct platform_device_id sccnxp_id_table[] = { + { "sc2681", SCCNXP_TYPE_SC2681 }, + { "sc2691", SCCNXP_TYPE_SC2691 }, + { "sc2692", SCCNXP_TYPE_SC2692 }, + { "sc2891", SCCNXP_TYPE_SC2891 }, + { "sc2892", SCCNXP_TYPE_SC2892 }, + { "sc28202", SCCNXP_TYPE_SC28202 }, + { "sc68681", SCCNXP_TYPE_SC68681 }, + { "sc68692", SCCNXP_TYPE_SC68692 }, +}; +MODULE_DEVICE_TABLE(platform, sccnxp_id_table); + +static struct platform_driver sccnxp_uart_driver = { + .driver = { + .name = SCCNXP_NAME, + .owner = THIS_MODULE, + }, + .probe = sccnxp_probe, + .remove = __devexit_p(sccnxp_remove), + .id_table = sccnxp_id_table, +}; +module_platform_driver(sccnxp_uart_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); +MODULE_DESCRIPTION("SCCNXP serial driver"); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index a21dc8e3b7c0..046279ce3e8d 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -159,7 +159,7 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state, retval = uport->ops->startup(uport); if (retval == 0) { if (uart_console(uport) && uport->cons->cflag) { - tty->termios->c_cflag = uport->cons->cflag; + tty->termios.c_cflag = uport->cons->cflag; uport->cons->cflag = 0; } /* @@ -172,11 +172,11 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state, * Setup the RTS and DTR signals once the * port is open and ready to respond. */ - if (tty->termios->c_cflag & CBAUD) + if (tty->termios.c_cflag & CBAUD) uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR); } - if (port->flags & ASYNC_CTS_FLOW) { + if (tty_port_cts_enabled(port)) { spin_lock_irq(&uport->lock); if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS)) tty->hw_stopped = 1; @@ -240,7 +240,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) /* * Turn off DTR and RTS early. */ - if (!tty || (tty->termios->c_cflag & HUPCL)) + if (!tty || (tty->termios.c_cflag & HUPCL)) uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); uart_port_shutdown(port); @@ -440,10 +440,10 @@ static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, * If we have no tty, termios, or the port does not exist, * then we can't set the parameters for this port. */ - if (!tty || !tty->termios || uport->type == PORT_UNKNOWN) + if (!tty || uport->type == PORT_UNKNOWN) return; - termios = tty->termios; + termios = &tty->termios; /* * Set flags based on termios cflag @@ -614,7 +614,7 @@ static void uart_throttle(struct tty_struct *tty) if (I_IXOFF(tty)) uart_send_xchar(tty, STOP_CHAR(tty)); - if (tty->termios->c_cflag & CRTSCTS) + if (tty->termios.c_cflag & CRTSCTS) uart_clear_mctrl(state->uart_port, TIOCM_RTS); } @@ -630,42 +630,48 @@ static void uart_unthrottle(struct tty_struct *tty) uart_send_xchar(tty, START_CHAR(tty)); } - if (tty->termios->c_cflag & CRTSCTS) + if (tty->termios.c_cflag & CRTSCTS) uart_set_mctrl(port, TIOCM_RTS); } -static int uart_get_info(struct uart_state *state, - struct serial_struct __user *retinfo) +static void uart_get_info(struct tty_port *port, + struct uart_state *state, + struct serial_struct *retinfo) { struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; - struct serial_struct tmp; - - memset(&tmp, 0, sizeof(tmp)); - /* Ensure the state we copy is consistent and no hardware changes - occur as we go */ - mutex_lock(&port->mutex); + memset(retinfo, 0, sizeof(*retinfo)); - tmp.type = uport->type; - tmp.line = uport->line; - tmp.port = uport->iobase; + retinfo->type = uport->type; + retinfo->line = uport->line; + retinfo->port = uport->iobase; if (HIGH_BITS_OFFSET) - tmp.port_high = (long) uport->iobase >> HIGH_BITS_OFFSET; - tmp.irq = uport->irq; - tmp.flags = uport->flags; - tmp.xmit_fifo_size = uport->fifosize; - tmp.baud_base = uport->uartclk / 16; - tmp.close_delay = jiffies_to_msecs(port->close_delay) / 10; - tmp.closing_wait = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ? + retinfo->port_high = (long) uport->iobase >> HIGH_BITS_OFFSET; + retinfo->irq = uport->irq; + retinfo->flags = uport->flags; + retinfo->xmit_fifo_size = uport->fifosize; + retinfo->baud_base = uport->uartclk / 16; + retinfo->close_delay = jiffies_to_msecs(port->close_delay) / 10; + retinfo->closing_wait = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ? ASYNC_CLOSING_WAIT_NONE : jiffies_to_msecs(port->closing_wait) / 10; - tmp.custom_divisor = uport->custom_divisor; - tmp.hub6 = uport->hub6; - tmp.io_type = uport->iotype; - tmp.iomem_reg_shift = uport->regshift; - tmp.iomem_base = (void *)(unsigned long)uport->mapbase; + retinfo->custom_divisor = uport->custom_divisor; + retinfo->hub6 = uport->hub6; + retinfo->io_type = uport->iotype; + retinfo->iomem_reg_shift = uport->regshift; + retinfo->iomem_base = (void *)(unsigned long)uport->mapbase; +} +static int uart_get_info_user(struct uart_state *state, + struct serial_struct __user *retinfo) +{ + struct tty_port *port = &state->port; + struct serial_struct tmp; + + /* Ensure the state we copy is consistent and no hardware changes + occur as we go */ + mutex_lock(&port->mutex); + uart_get_info(port, state, &tmp); mutex_unlock(&port->mutex); if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) @@ -673,42 +679,30 @@ static int uart_get_info(struct uart_state *state, return 0; } -static int uart_set_info(struct tty_struct *tty, struct uart_state *state, - struct serial_struct __user *newinfo) +static int uart_set_info(struct tty_struct *tty, struct tty_port *port, + struct uart_state *state, + struct serial_struct *new_info) { - struct serial_struct new_serial; struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; unsigned long new_port; unsigned int change_irq, change_port, closing_wait; unsigned int old_custom_divisor, close_delay; upf_t old_flags, new_flags; int retval = 0; - if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) - return -EFAULT; - - new_port = new_serial.port; + new_port = new_info->port; if (HIGH_BITS_OFFSET) - new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET; + new_port += (unsigned long) new_info->port_high << HIGH_BITS_OFFSET; - new_serial.irq = irq_canonicalize(new_serial.irq); - close_delay = msecs_to_jiffies(new_serial.close_delay * 10); - closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ? + new_info->irq = irq_canonicalize(new_info->irq); + close_delay = msecs_to_jiffies(new_info->close_delay * 10); + closing_wait = new_info->closing_wait == ASYNC_CLOSING_WAIT_NONE ? ASYNC_CLOSING_WAIT_NONE : - msecs_to_jiffies(new_serial.closing_wait * 10); + msecs_to_jiffies(new_info->closing_wait * 10); - /* - * This semaphore protects port->count. It is also - * very useful to prevent opens. Also, take the - * port configuration semaphore to make sure that a - * module insertion/removal doesn't change anything - * under us. - */ - mutex_lock(&port->mutex); change_irq = !(uport->flags & UPF_FIXED_PORT) - && new_serial.irq != uport->irq; + && new_info->irq != uport->irq; /* * Since changing the 'type' of the port changes its resource @@ -717,29 +711,29 @@ static int uart_set_info(struct tty_struct *tty, struct uart_state *state, */ change_port = !(uport->flags & UPF_FIXED_PORT) && (new_port != uport->iobase || - (unsigned long)new_serial.iomem_base != uport->mapbase || - new_serial.hub6 != uport->hub6 || - new_serial.io_type != uport->iotype || - new_serial.iomem_reg_shift != uport->regshift || - new_serial.type != uport->type); + (unsigned long)new_info->iomem_base != uport->mapbase || + new_info->hub6 != uport->hub6 || + new_info->io_type != uport->iotype || + new_info->iomem_reg_shift != uport->regshift || + new_info->type != uport->type); old_flags = uport->flags; - new_flags = new_serial.flags; + new_flags = new_info->flags; old_custom_divisor = uport->custom_divisor; if (!capable(CAP_SYS_ADMIN)) { retval = -EPERM; if (change_irq || change_port || - (new_serial.baud_base != uport->uartclk / 16) || + (new_info->baud_base != uport->uartclk / 16) || (close_delay != port->close_delay) || (closing_wait != port->closing_wait) || - (new_serial.xmit_fifo_size && - new_serial.xmit_fifo_size != uport->fifosize) || + (new_info->xmit_fifo_size && + new_info->xmit_fifo_size != uport->fifosize) || (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0)) goto exit; uport->flags = ((uport->flags & ~UPF_USR_MASK) | (new_flags & UPF_USR_MASK)); - uport->custom_divisor = new_serial.custom_divisor; + uport->custom_divisor = new_info->custom_divisor; goto check_and_exit; } @@ -747,10 +741,10 @@ static int uart_set_info(struct tty_struct *tty, struct uart_state *state, * Ask the low level driver to verify the settings. */ if (uport->ops->verify_port) - retval = uport->ops->verify_port(uport, &new_serial); + retval = uport->ops->verify_port(uport, new_info); - if ((new_serial.irq >= nr_irqs) || (new_serial.irq < 0) || - (new_serial.baud_base < 9600)) + if ((new_info->irq >= nr_irqs) || (new_info->irq < 0) || + (new_info->baud_base < 9600)) retval = -EINVAL; if (retval) @@ -790,11 +784,11 @@ static int uart_set_info(struct tty_struct *tty, struct uart_state *state, uport->ops->release_port(uport); uport->iobase = new_port; - uport->type = new_serial.type; - uport->hub6 = new_serial.hub6; - uport->iotype = new_serial.io_type; - uport->regshift = new_serial.iomem_reg_shift; - uport->mapbase = (unsigned long)new_serial.iomem_base; + uport->type = new_info->type; + uport->hub6 = new_info->hub6; + uport->iotype = new_info->io_type; + uport->regshift = new_info->iomem_reg_shift; + uport->mapbase = (unsigned long)new_info->iomem_base; /* * Claim and map the new regions @@ -835,16 +829,16 @@ static int uart_set_info(struct tty_struct *tty, struct uart_state *state, } if (change_irq) - uport->irq = new_serial.irq; + uport->irq = new_info->irq; if (!(uport->flags & UPF_FIXED_PORT)) - uport->uartclk = new_serial.baud_base * 16; + uport->uartclk = new_info->baud_base * 16; uport->flags = (uport->flags & ~UPF_CHANGE_MASK) | (new_flags & UPF_CHANGE_MASK); - uport->custom_divisor = new_serial.custom_divisor; + uport->custom_divisor = new_info->custom_divisor; port->close_delay = close_delay; port->closing_wait = closing_wait; - if (new_serial.xmit_fifo_size) - uport->fifosize = new_serial.xmit_fifo_size; + if (new_info->xmit_fifo_size) + uport->fifosize = new_info->xmit_fifo_size; if (port->tty) port->tty->low_latency = (uport->flags & UPF_LOW_LATENCY) ? 1 : 0; @@ -873,6 +867,28 @@ static int uart_set_info(struct tty_struct *tty, struct uart_state *state, } else retval = uart_startup(tty, state, 1); exit: + return retval; +} + +static int uart_set_info_user(struct tty_struct *tty, struct uart_state *state, + struct serial_struct __user *newinfo) +{ + struct serial_struct new_serial; + struct tty_port *port = &state->port; + int retval; + + if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) + return -EFAULT; + + /* + * This semaphore protects port->count. It is also + * very useful to prevent opens. Also, take the + * port configuration semaphore to make sure that a + * module insertion/removal doesn't change anything + * under us. + */ + mutex_lock(&port->mutex); + retval = uart_set_info(tty, port, state, &new_serial); mutex_unlock(&port->mutex); return retval; } @@ -1115,11 +1131,11 @@ uart_ioctl(struct tty_struct *tty, unsigned int cmd, */ switch (cmd) { case TIOCGSERIAL: - ret = uart_get_info(state, uarg); + ret = uart_get_info_user(state, uarg); break; case TIOCSSERIAL: - ret = uart_set_info(tty, state, uarg); + ret = uart_set_info_user(tty, state, uarg); break; case TIOCSERCONFIG: @@ -1187,7 +1203,7 @@ static void uart_set_ldisc(struct tty_struct *tty) struct uart_port *uport = state->uart_port; if (uport->ops->set_ldisc) - uport->ops->set_ldisc(uport, tty->termios->c_line); + uport->ops->set_ldisc(uport, tty->termios.c_line); } static void uart_set_termios(struct tty_struct *tty, @@ -1195,7 +1211,7 @@ static void uart_set_termios(struct tty_struct *tty, { struct uart_state *state = tty->driver_data; unsigned long flags; - unsigned int cflag = tty->termios->c_cflag; + unsigned int cflag = tty->termios.c_cflag; /* @@ -1206,9 +1222,9 @@ static void uart_set_termios(struct tty_struct *tty, */ #define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) if ((cflag ^ old_termios->c_cflag) == 0 && - tty->termios->c_ospeed == old_termios->c_ospeed && - tty->termios->c_ispeed == old_termios->c_ispeed && - RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0) { + tty->termios.c_ospeed == old_termios->c_ospeed && + tty->termios.c_ispeed == old_termios->c_ispeed && + RELEVANT_IFLAG(tty->termios.c_iflag ^ old_termios->c_iflag) == 0) { return; } @@ -1960,8 +1976,8 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) /* * If that's unset, use the tty termios setting. */ - if (port->tty && port->tty->termios && termios.c_cflag == 0) - termios = *(port->tty->termios); + if (port->tty && termios.c_cflag == 0) + termios = port->tty->termios; if (console_suspend_enabled) uart_change_pm(state, 0); @@ -2293,6 +2309,36 @@ struct tty_driver *uart_console_device(struct console *co, int *index) return p->tty_driver; } +static ssize_t uart_get_attr_uartclk(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int ret; + struct tty_port *port = dev_get_drvdata(dev); + struct uart_state *state = container_of(port, struct uart_state, port); + + mutex_lock(&state->port.mutex); + ret = snprintf(buf, PAGE_SIZE, "%d\n", state->uart_port->uartclk); + mutex_unlock(&state->port.mutex); + + return ret; +} + +static DEVICE_ATTR(uartclk, S_IRUSR | S_IRGRP, uart_get_attr_uartclk, NULL); + +static struct attribute *tty_dev_attrs[] = { + &dev_attr_uartclk.attr, + NULL, + }; + +static const struct attribute_group tty_dev_attr_group = { + .attrs = tty_dev_attrs, + }; + +static const struct attribute_group *tty_dev_attr_groups[] = { + &tty_dev_attr_group, + NULL + }; + /** * uart_add_one_port - attach a driver-defined port structure * @drv: pointer to the uart low level driver structure for this port @@ -2346,7 +2392,8 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) * Register the port whether it's detected or not. This allows * setserial to be used to alter this ports parameters. */ - tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev); + tty_dev = tty_port_register_device_attr(port, drv->tty_driver, + uport->line, uport->dev, port, tty_dev_attr_groups); if (likely(!IS_ERR(tty_dev))) { device_set_wakeup_capable(tty_dev, 1); } else { @@ -2492,7 +2539,7 @@ void uart_handle_cts_change(struct uart_port *uport, unsigned int status) uport->icount.cts++; - if (port->flags & ASYNC_CTS_FLOW) { + if (tty_port_cts_enabled(port)) { if (tty->hw_stopped) { if (status) { tty->hw_stopped = 0; diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index 5b3eda2024fe..a9e2bd1ab534 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -668,7 +668,7 @@ int sirfsoc_uart_probe(struct platform_device *pdev) if (res == NULL) { dev_err(&pdev->dev, "Insufficient resources.\n"); ret = -EFAULT; - goto irq_err; + goto err; } port->irq = res->start; @@ -676,7 +676,7 @@ int sirfsoc_uart_probe(struct platform_device *pdev) sirfport->p = pinctrl_get_select_default(&pdev->dev); ret = IS_ERR(sirfport->p); if (ret) - goto pin_err; + goto err; } port->ops = &sirfsoc_uart_ops; @@ -695,9 +695,6 @@ port_err: platform_set_drvdata(pdev, NULL); if (sirfport->hw_flow_ctrl) pinctrl_put(sirfport->p); -pin_err: -irq_err: - devm_iounmap(&pdev->dev, port->membase); err: return ret; } @@ -709,7 +706,6 @@ static int sirfsoc_uart_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); if (sirfport->hw_flow_ctrl) pinctrl_put(sirfport->p); - devm_iounmap(&pdev->dev, port->membase); uart_remove_one_port(&sirfsoc_uart_drv, port); return 0; } diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c index 675303b8ed84..b97913dcdbff 100644 --- a/drivers/tty/serial/sunsu.c +++ b/drivers/tty/serial/sunsu.c @@ -58,10 +58,16 @@ enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT }; static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" }; +struct serial_uart_config { + char *name; + int dfl_xmit_fifo_size; + int flags; +}; + /* * Here we define the default xmit fifo size used for each type of UART. */ -static const struct serial_uart_config uart_config[PORT_MAX_8250+1] = { +static const struct serial_uart_config uart_config[] = { { "unknown", 1, 0 }, { "8250", 1, 0 }, { "16450", 1, 0 }, diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c index 593d40ad0a6b..70e3a525bc82 100644 --- a/drivers/tty/synclink.c +++ b/drivers/tty/synclink.c @@ -1359,7 +1359,7 @@ static void mgsl_isr_io_pin( struct mgsl_struct *info ) } } - if ( (info->port.flags & ASYNC_CTS_FLOW) && + if (tty_port_cts_enabled(&info->port) && (status & MISCSTATUS_CTS_LATCHED) ) { if (info->port.tty->hw_stopped) { if (status & MISCSTATUS_CTS) { @@ -1840,22 +1840,22 @@ static void shutdown(struct mgsl_struct * info) usc_DisableInterrupts(info,RECEIVE_DATA + RECEIVE_STATUS + TRANSMIT_DATA + TRANSMIT_STATUS + IO_PIN + MISC ); usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE); - + /* Disable DMAEN (Port 7, Bit 14) */ /* This disconnects the DMA request signal from the ISA bus */ /* on the ISA adapter. This has no effect for the PCI adapter */ usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14)); - + /* Disable INTEN (Port 6, Bit12) */ /* This disconnects the IRQ request signal to the ISA bus */ /* on the ISA adapter. This has no effect for the PCI adapter */ usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12)); - - if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) { + + if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) { info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); usc_set_serial_signals(info); } - + spin_unlock_irqrestore(&info->irq_spinlock,flags); mgsl_release_resources(info); @@ -1895,7 +1895,7 @@ static void mgsl_program_hw(struct mgsl_struct *info) usc_EnableInterrupts(info, IO_PIN); usc_get_serial_signals(info); - if (info->netcount || info->port.tty->termios->c_cflag & CREAD) + if (info->netcount || info->port.tty->termios.c_cflag & CREAD) usc_start_receiver(info); spin_unlock_irqrestore(&info->irq_spinlock,flags); @@ -1908,14 +1908,14 @@ static void mgsl_change_params(struct mgsl_struct *info) unsigned cflag; int bits_per_char; - if (!info->port.tty || !info->port.tty->termios) + if (!info->port.tty) return; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_change_params(%s)\n", __FILE__,__LINE__, info->device_name ); - cflag = info->port.tty->termios->c_cflag; + cflag = info->port.tty->termios.c_cflag; /* if B0 rate (hangup) specified then negate DTR and RTS */ /* otherwise assert DTR and RTS */ @@ -2367,8 +2367,8 @@ static void mgsl_throttle(struct tty_struct * tty) if (I_IXOFF(tty)) mgsl_send_xchar(tty, STOP_CHAR(tty)); - - if (tty->termios->c_cflag & CRTSCTS) { + + if (tty->termios.c_cflag & CRTSCTS) { spin_lock_irqsave(&info->irq_spinlock,flags); info->serial_signals &= ~SerialSignal_RTS; usc_set_serial_signals(info); @@ -2401,8 +2401,8 @@ static void mgsl_unthrottle(struct tty_struct * tty) else mgsl_send_xchar(tty, START_CHAR(tty)); } - - if (tty->termios->c_cflag & CRTSCTS) { + + if (tty->termios.c_cflag & CRTSCTS) { spin_lock_irqsave(&info->irq_spinlock,flags); info->serial_signals |= SerialSignal_RTS; usc_set_serial_signals(info); @@ -3045,7 +3045,7 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio /* Handle transition to B0 status */ if (old_termios->c_cflag & CBAUD && - !(tty->termios->c_cflag & CBAUD)) { + !(tty->termios.c_cflag & CBAUD)) { info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); spin_lock_irqsave(&info->irq_spinlock,flags); usc_set_serial_signals(info); @@ -3054,9 +3054,9 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio /* Handle transition away from B0 status */ if (!(old_termios->c_cflag & CBAUD) && - tty->termios->c_cflag & CBAUD) { + tty->termios.c_cflag & CBAUD) { info->serial_signals |= SerialSignal_DTR; - if (!(tty->termios->c_cflag & CRTSCTS) || + if (!(tty->termios.c_cflag & CRTSCTS) || !test_bit(TTY_THROTTLED, &tty->flags)) { info->serial_signals |= SerialSignal_RTS; } @@ -3067,7 +3067,7 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio /* Handle turning off CRTSCTS */ if (old_termios->c_cflag & CRTSCTS && - !(tty->termios->c_cflag & CRTSCTS)) { + !(tty->termios.c_cflag & CRTSCTS)) { tty->hw_stopped = 0; mgsl_start(tty); } @@ -3287,7 +3287,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, return 0; } - if (tty->termios->c_cflag & CLOCAL) + if (tty->termios.c_cflag & CLOCAL) do_clocal = true; /* Wait for carrier detect and the line to become @@ -3313,7 +3313,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, port->blocked_open++; while (1) { - if (tty->termios->c_cflag & CBAUD) + if (tty->termios.c_cflag & CBAUD) tty_port_raise_dtr_rts(port); set_current_state(TASK_INTERRUPTIBLE); @@ -3338,9 +3338,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, printk("%s(%d):block_til_ready blocking on %s count=%d\n", __FILE__,__LINE__, tty->driver->name, port->count ); - tty_unlock(); + tty_unlock(tty); schedule(); - tty_lock(); + tty_lock(tty); } set_current_state(TASK_RUNNING); @@ -3362,6 +3362,29 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, } /* end of block_til_ready() */ +static int mgsl_install(struct tty_driver *driver, struct tty_struct *tty) +{ + struct mgsl_struct *info; + int line = tty->index; + + /* verify range of specified line number */ + if (line >= mgsl_device_count) { + printk("%s(%d):mgsl_open with invalid line #%d.\n", + __FILE__, __LINE__, line); + return -ENODEV; + } + + /* find the info structure for the specified line */ + info = mgsl_device_list; + while (info && info->line != line) + info = info->next_device; + if (mgsl_paranoia_check(info, tty->name, "mgsl_open")) + return -ENODEV; + tty->driver_data = info; + + return tty_port_install(&info->port, driver, tty); +} + /* mgsl_open() * * Called when a port is opened. Init and enable port. @@ -3374,26 +3397,10 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, */ static int mgsl_open(struct tty_struct *tty, struct file * filp) { - struct mgsl_struct *info; - int retval, line; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; + int retval; - /* verify range of specified line number */ - line = tty->index; - if (line >= mgsl_device_count) { - printk("%s(%d):mgsl_open with invalid line #%d.\n", - __FILE__,__LINE__,line); - return -ENODEV; - } - - /* find the info structure for the specified line */ - info = mgsl_device_list; - while(info && info->line != line) - info = info->next_device; - if (mgsl_paranoia_check(info, tty->name, "mgsl_open")) - return -ENODEV; - - tty->driver_data = info; info->port.tty = tty; if (debug_level >= DEBUG_LEVEL_INFO) @@ -4297,6 +4304,7 @@ static struct mgsl_struct* mgsl_allocate_device(void) } /* end of mgsl_allocate_device()*/ static const struct tty_operations mgsl_ops = { + .install = mgsl_install, .open = mgsl_open, .close = mgsl_close, .write = mgsl_write, diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index aa1debf97cc7..b38e954eedd3 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -785,7 +785,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) /* Handle transition to B0 status */ if (old_termios->c_cflag & CBAUD && - !(tty->termios->c_cflag & CBAUD)) { + !(tty->termios.c_cflag & CBAUD)) { info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR); spin_lock_irqsave(&info->lock,flags); set_signals(info); @@ -794,9 +794,9 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) /* Handle transition away from B0 status */ if (!(old_termios->c_cflag & CBAUD) && - tty->termios->c_cflag & CBAUD) { + tty->termios.c_cflag & CBAUD) { info->signals |= SerialSignal_DTR; - if (!(tty->termios->c_cflag & CRTSCTS) || + if (!(tty->termios.c_cflag & CRTSCTS) || !test_bit(TTY_THROTTLED, &tty->flags)) { info->signals |= SerialSignal_RTS; } @@ -807,7 +807,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) /* Handle turning off CRTSCTS */ if (old_termios->c_cflag & CRTSCTS && - !(tty->termios->c_cflag & CRTSCTS)) { + !(tty->termios.c_cflag & CRTSCTS)) { tty->hw_stopped = 0; tx_release(tty); } @@ -1372,7 +1372,7 @@ static void throttle(struct tty_struct * tty) DBGINFO(("%s throttle\n", info->device_name)); if (I_IXOFF(tty)) send_xchar(tty, STOP_CHAR(tty)); - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { spin_lock_irqsave(&info->lock,flags); info->signals &= ~SerialSignal_RTS; set_signals(info); @@ -1397,7 +1397,7 @@ static void unthrottle(struct tty_struct * tty) else send_xchar(tty, START_CHAR(tty)); } - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { spin_lock_irqsave(&info->lock,flags); info->signals |= SerialSignal_RTS; set_signals(info); @@ -2053,7 +2053,7 @@ static void cts_change(struct slgt_info *info, unsigned short status) wake_up_interruptible(&info->event_wait_q); info->pending_bh |= BH_STATUS; - if (info->port.flags & ASYNC_CTS_FLOW) { + if (tty_port_cts_enabled(&info->port)) { if (info->port.tty) { if (info->port.tty->hw_stopped) { if (info->signals & SerialSignal_CTS) { @@ -2493,7 +2493,7 @@ static void shutdown(struct slgt_info *info) slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); - if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) { + if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) { info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS); set_signals(info); } @@ -2534,7 +2534,7 @@ static void program_hw(struct slgt_info *info) get_signals(info); if (info->netcount || - (info->port.tty && info->port.tty->termios->c_cflag & CREAD)) + (info->port.tty && info->port.tty->termios.c_cflag & CREAD)) rx_start(info); spin_unlock_irqrestore(&info->lock,flags); @@ -2548,11 +2548,11 @@ static void change_params(struct slgt_info *info) unsigned cflag; int bits_per_char; - if (!info->port.tty || !info->port.tty->termios) + if (!info->port.tty) return; DBGINFO(("%s change_params\n", info->device_name)); - cflag = info->port.tty->termios->c_cflag; + cflag = info->port.tty->termios.c_cflag; /* if B0 rate (hangup) specified then negate DTR and RTS */ /* otherwise assert DTR and RTS */ @@ -3292,7 +3292,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, return 0; } - if (tty->termios->c_cflag & CLOCAL) + if (tty->termios.c_cflag & CLOCAL) do_clocal = true; /* Wait for carrier detect and the line to become @@ -3314,7 +3314,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, port->blocked_open++; while (1) { - if ((tty->termios->c_cflag & CBAUD)) + if ((tty->termios.c_cflag & CBAUD)) tty_port_raise_dtr_rts(port); set_current_state(TASK_INTERRUPTIBLE); @@ -3336,9 +3336,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, } DBGINFO(("%s block_til_ready wait\n", tty->driver->name)); - tty_unlock(); + tty_unlock(tty); schedule(); - tty_lock(); + tty_lock(tty); } set_current_state(TASK_RUNNING); @@ -3689,8 +3689,11 @@ static void device_init(int adapter_num, struct pci_dev *pdev) } } - for (i=0; i < port_count; ++i) - tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev)); + for (i = 0; i < port_count; ++i) { + struct slgt_info *info = port_array[i]; + tty_port_register_device(&info->port, serial_driver, info->line, + &info->pdev->dev); + } } static int __devinit init_one(struct pci_dev *dev, diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c index a3dddc12d2fe..f17d9f3d84a2 100644 --- a/drivers/tty/synclinkmp.c +++ b/drivers/tty/synclinkmp.c @@ -711,15 +711,11 @@ static void ldisc_receive_buf(struct tty_struct *tty, /* tty callbacks */ -/* Called when a port is opened. Init and enable port. - */ -static int open(struct tty_struct *tty, struct file *filp) +static int install(struct tty_driver *driver, struct tty_struct *tty) { SLMP_INFO *info; - int retval, line; - unsigned long flags; + int line = tty->index; - line = tty->index; if (line >= synclinkmp_device_count) { printk("%s(%d): open with invalid line #%d.\n", __FILE__,__LINE__,line); @@ -727,17 +723,30 @@ static int open(struct tty_struct *tty, struct file *filp) } info = synclinkmp_device_list; - while(info && info->line != line) + while (info && info->line != line) info = info->next_device; if (sanity_check(info, tty->name, "open")) return -ENODEV; - if ( info->init_error ) { + if (info->init_error) { printk("%s(%d):%s device is not allocated, init error=%d\n", - __FILE__,__LINE__,info->device_name,info->init_error); + __FILE__, __LINE__, info->device_name, + info->init_error); return -ENODEV; } tty->driver_data = info; + + return tty_port_install(&info->port, driver, tty); +} + +/* Called when a port is opened. Init and enable port. + */ +static int open(struct tty_struct *tty, struct file *filp) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + int retval; + info->port.tty = tty; if (debug_level >= DEBUG_LEVEL_INFO) @@ -873,7 +882,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) /* Handle transition to B0 status */ if (old_termios->c_cflag & CBAUD && - !(tty->termios->c_cflag & CBAUD)) { + !(tty->termios.c_cflag & CBAUD)) { info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); spin_lock_irqsave(&info->lock,flags); set_signals(info); @@ -882,9 +891,9 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) /* Handle transition away from B0 status */ if (!(old_termios->c_cflag & CBAUD) && - tty->termios->c_cflag & CBAUD) { + tty->termios.c_cflag & CBAUD) { info->serial_signals |= SerialSignal_DTR; - if (!(tty->termios->c_cflag & CRTSCTS) || + if (!(tty->termios.c_cflag & CRTSCTS) || !test_bit(TTY_THROTTLED, &tty->flags)) { info->serial_signals |= SerialSignal_RTS; } @@ -895,7 +904,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) /* Handle turning off CRTSCTS */ if (old_termios->c_cflag & CRTSCTS && - !(tty->termios->c_cflag & CRTSCTS)) { + !(tty->termios.c_cflag & CRTSCTS)) { tty->hw_stopped = 0; tx_release(tty); } @@ -1473,7 +1482,7 @@ static void throttle(struct tty_struct * tty) if (I_IXOFF(tty)) send_xchar(tty, STOP_CHAR(tty)); - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { spin_lock_irqsave(&info->lock,flags); info->serial_signals &= ~SerialSignal_RTS; set_signals(info); @@ -1502,7 +1511,7 @@ static void unthrottle(struct tty_struct * tty) send_xchar(tty, START_CHAR(tty)); } - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { spin_lock_irqsave(&info->lock,flags); info->serial_signals |= SerialSignal_RTS; set_signals(info); @@ -2491,7 +2500,7 @@ static void isr_io_pin( SLMP_INFO *info, u16 status ) } } - if ( (info->port.flags & ASYNC_CTS_FLOW) && + if (tty_port_cts_enabled(&info->port) && (status & MISCSTATUS_CTS_LATCHED) ) { if ( info->port.tty ) { if (info->port.tty->hw_stopped) { @@ -2708,7 +2717,7 @@ static void shutdown(SLMP_INFO * info) reset_port(info); - if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) { + if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) { info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); set_signals(info); } @@ -2749,7 +2758,7 @@ static void program_hw(SLMP_INFO *info) get_signals(info); - if (info->netcount || (info->port.tty && info->port.tty->termios->c_cflag & CREAD) ) + if (info->netcount || (info->port.tty && info->port.tty->termios.c_cflag & CREAD) ) rx_start(info); spin_unlock_irqrestore(&info->lock,flags); @@ -2762,14 +2771,14 @@ static void change_params(SLMP_INFO *info) unsigned cflag; int bits_per_char; - if (!info->port.tty || !info->port.tty->termios) + if (!info->port.tty) return; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s change_params()\n", __FILE__,__LINE__, info->device_name ); - cflag = info->port.tty->termios->c_cflag; + cflag = info->port.tty->termios.c_cflag; /* if B0 rate (hangup) specified then negate DTR and RTS */ /* otherwise assert DTR and RTS */ @@ -3306,7 +3315,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, return 0; } - if (tty->termios->c_cflag & CLOCAL) + if (tty->termios.c_cflag & CLOCAL) do_clocal = true; /* Wait for carrier detect and the line to become @@ -3332,7 +3341,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, port->blocked_open++; while (1) { - if (tty->termios->c_cflag & CBAUD) + if (tty->termios.c_cflag & CBAUD) tty_port_raise_dtr_rts(port); set_current_state(TASK_INTERRUPTIBLE); @@ -3357,9 +3366,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, printk("%s(%d):%s block_til_ready() count=%d\n", __FILE__,__LINE__, tty->driver->name, port->count ); - tty_unlock(); + tty_unlock(tty); schedule(); - tty_lock(); + tty_lock(tty); } set_current_state(TASK_RUNNING); @@ -3881,6 +3890,7 @@ static void device_init(int adapter_num, struct pci_dev *pdev) } static const struct tty_operations ops = { + .install = install, .open = open, .close = close, .write = write, diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index b425c79675ad..8a5a8b064616 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -181,10 +181,13 @@ struct tty_struct *alloc_tty_struct(void) void free_tty_struct(struct tty_struct *tty) { + if (!tty) + return; if (tty->dev) put_device(tty->dev); kfree(tty->write_buf); tty_buffer_free_all(tty); + tty->magic = 0xDEADDEAD; kfree(tty); } @@ -573,7 +576,7 @@ void __tty_hangup(struct tty_struct *tty) } spin_unlock(&redirect_lock); - tty_lock(); + tty_lock(tty); /* some functions below drop BTM, so we need this bit */ set_bit(TTY_HUPPING, &tty->flags); @@ -666,7 +669,7 @@ void __tty_hangup(struct tty_struct *tty) clear_bit(TTY_HUPPING, &tty->flags); tty_ldisc_enable(tty); - tty_unlock(); + tty_unlock(tty); if (f) fput(f); @@ -1103,12 +1106,12 @@ void tty_write_message(struct tty_struct *tty, char *msg) { if (tty) { mutex_lock(&tty->atomic_write_lock); - tty_lock(); + tty_lock(tty); if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags)) { - tty_unlock(); + tty_unlock(tty); tty->ops->write(tty, msg, strlen(msg)); } else - tty_unlock(); + tty_unlock(tty); tty_write_unlock(tty); } return; @@ -1213,7 +1216,10 @@ static void pty_line_name(struct tty_driver *driver, int index, char *p) */ static void tty_line_name(struct tty_driver *driver, int index, char *p) { - sprintf(p, "%s%d", driver->name, index + driver->name_base); + if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE) + strcpy(p, driver->name); + else + sprintf(p, "%s%d", driver->name, index + driver->name_base); } /** @@ -1249,21 +1255,19 @@ int tty_init_termios(struct tty_struct *tty) struct ktermios *tp; int idx = tty->index; - tp = tty->driver->termios[idx]; - if (tp == NULL) { - tp = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL); - if (tp == NULL) - return -ENOMEM; - memcpy(tp, &tty->driver->init_termios, - sizeof(struct ktermios)); - tty->driver->termios[idx] = tp; + if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) + tty->termios = tty->driver->init_termios; + else { + /* Check for lazy saved data */ + tp = tty->driver->termios[idx]; + if (tp != NULL) + tty->termios = *tp; + else + tty->termios = tty->driver->init_termios; } - tty->termios = tp; - tty->termios_locked = tp + 1; - /* Compatibility until drivers always set this */ - tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios); - tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios); + tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios); + tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios); return 0; } EXPORT_SYMBOL_GPL(tty_init_termios); @@ -1403,10 +1407,18 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx) } initialize_tty_struct(tty, driver, idx); + tty_lock(tty); retval = tty_driver_install_tty(driver, tty); if (retval < 0) goto err_deinit_tty; + if (!tty->port) + tty->port = driver->ports[idx]; + + WARN_RATELIMIT(!tty->port, + "%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n", + __func__, tty->driver->name); + /* * Structures all installed ... call the ldisc open routines. * If we fail here just call release_tty to clean up. No need @@ -1415,9 +1427,11 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx) retval = tty_ldisc_setup(tty, tty->link); if (retval) goto err_release_tty; + /* Return the tty locked so that it cannot vanish under the caller */ return tty; err_deinit_tty: + tty_unlock(tty); deinitialize_tty_struct(tty); free_tty_struct(tty); err_module_put: @@ -1426,6 +1440,7 @@ err_module_put: /* call the tty release_tty routine to clean out this slot */ err_release_tty: + tty_unlock(tty); printk_ratelimited(KERN_INFO "tty_init_dev: ldisc open failed, " "clearing slot %d\n", idx); release_tty(tty, idx); @@ -1436,22 +1451,25 @@ void tty_free_termios(struct tty_struct *tty) { struct ktermios *tp; int idx = tty->index; - /* Kill this flag and push into drivers for locking etc */ - if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) { - /* FIXME: Locking on ->termios array */ - tp = tty->termios; - tty->driver->termios[idx] = NULL; - kfree(tp); + + /* If the port is going to reset then it has no termios to save */ + if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) + return; + + /* Stash the termios data */ + tp = tty->driver->termios[idx]; + if (tp == NULL) { + tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL); + if (tp == NULL) { + pr_warn("tty: no memory to save termios state.\n"); + return; + } + tty->driver->termios[idx] = tp; } + *tp = tty->termios; } EXPORT_SYMBOL(tty_free_termios); -void tty_shutdown(struct tty_struct *tty) -{ - tty_driver_remove_tty(tty->driver, tty); - tty_free_termios(tty); -} -EXPORT_SYMBOL(tty_shutdown); /** * release_one_tty - release tty structure memory @@ -1462,7 +1480,6 @@ EXPORT_SYMBOL(tty_shutdown); * in use. It also gets called when setup of a device fails. * * Locking: - * tty_mutex - sometimes only * takes the file list lock internally when working on the list * of ttys that the driver keeps. * @@ -1495,11 +1512,6 @@ static void queue_release_one_tty(struct kref *kref) { struct tty_struct *tty = container_of(kref, struct tty_struct, kref); - if (tty->ops->shutdown) - tty->ops->shutdown(tty); - else - tty_shutdown(tty); - /* The hangup queue is now free so we can reuse it rather than waste a chunk of memory for each port */ INIT_WORK(&tty->hangup_work, release_one_tty); @@ -1528,16 +1540,20 @@ EXPORT_SYMBOL(tty_kref_put); * and decrement the refcount of the backing module. * * Locking: - * tty_mutex - sometimes only + * tty_mutex * takes the file list lock internally when working on the list * of ttys that the driver keeps. - * FIXME: should we require tty_mutex is held here ?? * */ static void release_tty(struct tty_struct *tty, int idx) { /* This should always be true but check for the moment */ WARN_ON(tty->index != idx); + WARN_ON(!mutex_is_locked(&tty_mutex)); + if (tty->ops->shutdown) + tty->ops->shutdown(tty); + tty_free_termios(tty); + tty_driver_remove_tty(tty->driver, tty); if (tty->link) tty_kref_put(tty->link); @@ -1572,22 +1588,12 @@ static int tty_release_checks(struct tty_struct *tty, struct tty_struct *o_tty, __func__, idx, tty->name); return -1; } - if (tty->termios != tty->driver->termios[idx]) { - printk(KERN_DEBUG "%s: driver.termios[%d] not termios for (%s)\n", - __func__, idx, tty->name); - return -1; - } if (tty->driver->other) { if (o_tty != tty->driver->other->ttys[idx]) { printk(KERN_DEBUG "%s: other->table[%d] not o_tty for (%s)\n", __func__, idx, tty->name); return -1; } - if (o_tty->termios != tty->driver->other->termios[idx]) { - printk(KERN_DEBUG "%s: other->termios[%d] not o_termios for (%s)\n", - __func__, idx, tty->name); - return -1; - } if (o_tty->link != tty) { printk(KERN_DEBUG "%s: bad pty pointers\n", __func__); return -1; @@ -1628,7 +1634,7 @@ int tty_release(struct inode *inode, struct file *filp) if (tty_paranoia_check(tty, inode, __func__)) return 0; - tty_lock(); + tty_lock(tty); check_tty_count(tty, __func__); __tty_fasync(-1, filp, 0); @@ -1637,10 +1643,11 @@ int tty_release(struct inode *inode, struct file *filp) pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY && tty->driver->subtype == PTY_TYPE_MASTER); devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0; + /* Review: parallel close */ o_tty = tty->link; if (tty_release_checks(tty, o_tty, idx)) { - tty_unlock(); + tty_unlock(tty); return 0; } @@ -1652,7 +1659,7 @@ int tty_release(struct inode *inode, struct file *filp) if (tty->ops->close) tty->ops->close(tty, filp); - tty_unlock(); + tty_unlock(tty); /* * Sanity check: if tty->count is going to zero, there shouldn't be * any waiters on tty->read_wait or tty->write_wait. We test the @@ -1675,7 +1682,7 @@ int tty_release(struct inode *inode, struct file *filp) opens on /dev/tty */ mutex_lock(&tty_mutex); - tty_lock(); + tty_lock_pair(tty, o_tty); tty_closing = tty->count <= 1; o_tty_closing = o_tty && (o_tty->count <= (pty_master ? 1 : 0)); @@ -1706,7 +1713,7 @@ int tty_release(struct inode *inode, struct file *filp) printk(KERN_WARNING "%s: %s: read/write wait queue active!\n", __func__, tty_name(tty, buf)); - tty_unlock(); + tty_unlock_pair(tty, o_tty); mutex_unlock(&tty_mutex); schedule(); } @@ -1715,6 +1722,9 @@ int tty_release(struct inode *inode, struct file *filp) * The closing flags are now consistent with the open counts on * both sides, and we've completed the last operation that could * block, so it's safe to proceed with closing. + * + * We must *not* drop the tty_mutex until we ensure that a further + * entry into tty_open can not pick up this tty. */ if (pty_master) { if (--o_tty->count < 0) { @@ -1766,12 +1776,13 @@ int tty_release(struct inode *inode, struct file *filp) } mutex_unlock(&tty_mutex); + tty_unlock_pair(tty, o_tty); + /* At this point the TTY_CLOSING flag should ensure a dead tty + cannot be re-opened by a racing opener */ /* check whether both sides are closing ... */ - if (!tty_closing || (o_tty && !o_tty_closing)) { - tty_unlock(); + if (!tty_closing || (o_tty && !o_tty_closing)) return 0; - } #ifdef TTY_DEBUG_HANGUP printk(KERN_DEBUG "%s: freeing tty structure...\n", __func__); @@ -1782,14 +1793,17 @@ int tty_release(struct inode *inode, struct file *filp) tty_ldisc_release(tty, o_tty); /* * The release_tty function takes care of the details of clearing - * the slots and preserving the termios structure. + * the slots and preserving the termios structure. The tty_unlock_pair + * should be safe as we keep a kref while the tty is locked (so the + * unlock never unlocks a freed tty). */ + mutex_lock(&tty_mutex); release_tty(tty, idx); + mutex_unlock(&tty_mutex); /* Make this pty number available for reallocation */ if (devpts) devpts_kill_index(inode, idx); - tty_unlock(); return 0; } @@ -1893,6 +1907,9 @@ static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp, * Locking: tty_mutex protects tty, tty_lookup_driver and tty_init_dev. * tty->count should protect the rest. * ->siglock protects ->signal/->sighand + * + * Note: the tty_unlock/lock cases without a ref are only safe due to + * tty_mutex */ static int tty_open(struct inode *inode, struct file *filp) @@ -1916,8 +1933,7 @@ retry_open: retval = 0; mutex_lock(&tty_mutex); - tty_lock(); - + /* This is protected by the tty_mutex */ tty = tty_open_current_tty(device, filp); if (IS_ERR(tty)) { retval = PTR_ERR(tty); @@ -1938,17 +1954,19 @@ retry_open: } if (tty) { + tty_lock(tty); retval = tty_reopen(tty); - if (retval) + if (retval < 0) { + tty_unlock(tty); tty = ERR_PTR(retval); - } else + } + } else /* Returns with the tty_lock held for now */ tty = tty_init_dev(driver, index); mutex_unlock(&tty_mutex); if (driver) tty_driver_kref_put(driver); if (IS_ERR(tty)) { - tty_unlock(); retval = PTR_ERR(tty); goto err_file; } @@ -1977,7 +1995,7 @@ retry_open: printk(KERN_DEBUG "%s: error %d in opening %s...\n", __func__, retval, tty->name); #endif - tty_unlock(); /* need to call tty_release without BTM */ + tty_unlock(tty); /* need to call tty_release without BTM */ tty_release(inode, filp); if (retval != -ERESTARTSYS) return retval; @@ -1989,17 +2007,15 @@ retry_open: /* * Need to reset f_op in case a hangup happened. */ - tty_lock(); if (filp->f_op == &hung_up_tty_fops) filp->f_op = &tty_fops; - tty_unlock(); goto retry_open; } - tty_unlock(); + tty_unlock(tty); mutex_lock(&tty_mutex); - tty_lock(); + tty_lock(tty); spin_lock_irq(¤t->sighand->siglock); if (!noctty && current->signal->leader && @@ -2007,11 +2023,10 @@ retry_open: tty->session == NULL) __proc_set_tty(current, tty); spin_unlock_irq(¤t->sighand->siglock); - tty_unlock(); + tty_unlock(tty); mutex_unlock(&tty_mutex); return 0; err_unlock: - tty_unlock(); mutex_unlock(&tty_mutex); /* after locks to avoid deadlock */ if (!IS_ERR_OR_NULL(driver)) @@ -2094,10 +2109,13 @@ out: static int tty_fasync(int fd, struct file *filp, int on) { + struct tty_struct *tty = file_tty(filp); int retval; - tty_lock(); + + tty_lock(tty); retval = __tty_fasync(fd, filp, on); - tty_unlock(); + tty_unlock(tty); + return retval; } @@ -2756,7 +2774,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) if (ld->ops->ioctl) { retval = ld->ops->ioctl(tty, file, cmd, arg); if (retval == -ENOIOCTLCMD) - retval = -EINVAL; + retval = -ENOTTY; } tty_ldisc_deref(ld); return retval; @@ -2934,6 +2952,7 @@ void initialize_tty_struct(struct tty_struct *tty, tty->pgrp = NULL; tty->overrun_time = jiffies; tty_buffer_init(tty); + mutex_init(&tty->legacy_mutex); mutex_init(&tty->termios_mutex); mutex_init(&tty->ldisc_mutex); init_waitqueue_head(&tty->write_wait); @@ -2991,6 +3010,15 @@ EXPORT_SYMBOL_GPL(tty_put_char); struct class *tty_class; +static int tty_cdev_add(struct tty_driver *driver, dev_t dev, + unsigned int index, unsigned int count) +{ + /* init here, since reused cdevs cause crashes */ + cdev_init(&driver->cdevs[index], &tty_fops); + driver->cdevs[index].owner = driver->owner; + return cdev_add(&driver->cdevs[index], dev, count); +} + /** * tty_register_device - register a tty device * @driver: the tty driver that describes the tty device @@ -3013,8 +3041,46 @@ struct class *tty_class; struct device *tty_register_device(struct tty_driver *driver, unsigned index, struct device *device) { + return tty_register_device_attr(driver, index, device, NULL, NULL); +} +EXPORT_SYMBOL(tty_register_device); + +static void tty_device_create_release(struct device *dev) +{ + pr_debug("device: '%s': %s\n", dev_name(dev), __func__); + kfree(dev); +} + +/** + * tty_register_device_attr - register a tty device + * @driver: the tty driver that describes the tty device + * @index: the index in the tty driver for this tty device + * @device: a struct device that is associated with this tty device. + * This field is optional, if there is no known struct device + * for this tty device it can be set to NULL safely. + * @drvdata: Driver data to be set to device. + * @attr_grp: Attribute group to be set on device. + * + * Returns a pointer to the struct device for this tty device + * (or ERR_PTR(-EFOO) on error). + * + * This call is required to be made to register an individual tty device + * if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set. If + * that bit is not set, this function should not be called by a tty + * driver. + * + * Locking: ?? + */ +struct device *tty_register_device_attr(struct tty_driver *driver, + unsigned index, struct device *device, + void *drvdata, + const struct attribute_group **attr_grp) +{ char name[64]; - dev_t dev = MKDEV(driver->major, driver->minor_start) + index; + dev_t devt = MKDEV(driver->major, driver->minor_start) + index; + struct device *dev = NULL; + int retval = -ENODEV; + bool cdev = false; if (index >= driver->num) { printk(KERN_ERR "Attempt to register invalid tty line number " @@ -3027,9 +3093,40 @@ struct device *tty_register_device(struct tty_driver *driver, unsigned index, else tty_line_name(driver, index, name); - return device_create(tty_class, device, dev, NULL, name); + if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) { + retval = tty_cdev_add(driver, devt, index, 1); + if (retval) + goto error; + cdev = true; + } + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + retval = -ENOMEM; + goto error; + } + + dev->devt = devt; + dev->class = tty_class; + dev->parent = device; + dev->release = tty_device_create_release; + dev_set_name(dev, "%s", name); + dev->groups = attr_grp; + dev_set_drvdata(dev, drvdata); + + retval = device_register(dev); + if (retval) + goto error; + + return dev; + +error: + put_device(dev); + if (cdev) + cdev_del(&driver->cdevs[index]); + return ERR_PTR(retval); } -EXPORT_SYMBOL(tty_register_device); +EXPORT_SYMBOL_GPL(tty_register_device_attr); /** * tty_unregister_device - unregister a tty device @@ -3046,31 +3143,82 @@ void tty_unregister_device(struct tty_driver *driver, unsigned index) { device_destroy(tty_class, MKDEV(driver->major, driver->minor_start) + index); + if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) + cdev_del(&driver->cdevs[index]); } EXPORT_SYMBOL(tty_unregister_device); -struct tty_driver *__alloc_tty_driver(int lines, struct module *owner) +/** + * __tty_alloc_driver -- allocate tty driver + * @lines: count of lines this driver can handle at most + * @owner: module which is repsonsible for this driver + * @flags: some of TTY_DRIVER_* flags, will be set in driver->flags + * + * This should not be called directly, some of the provided macros should be + * used instead. Use IS_ERR and friends on @retval. + */ +struct tty_driver *__tty_alloc_driver(unsigned int lines, struct module *owner, + unsigned long flags) { struct tty_driver *driver; + unsigned int cdevs = 1; + int err; + + if (!lines || (flags & TTY_DRIVER_UNNUMBERED_NODE && lines > 1)) + return ERR_PTR(-EINVAL); driver = kzalloc(sizeof(struct tty_driver), GFP_KERNEL); - if (driver) { - kref_init(&driver->kref); - driver->magic = TTY_DRIVER_MAGIC; - driver->num = lines; - driver->owner = owner; - /* later we'll move allocation of tables here */ + if (!driver) + return ERR_PTR(-ENOMEM); + + kref_init(&driver->kref); + driver->magic = TTY_DRIVER_MAGIC; + driver->num = lines; + driver->owner = owner; + driver->flags = flags; + + if (!(flags & TTY_DRIVER_DEVPTS_MEM)) { + driver->ttys = kcalloc(lines, sizeof(*driver->ttys), + GFP_KERNEL); + driver->termios = kcalloc(lines, sizeof(*driver->termios), + GFP_KERNEL); + if (!driver->ttys || !driver->termios) { + err = -ENOMEM; + goto err_free_all; + } } + + if (!(flags & TTY_DRIVER_DYNAMIC_ALLOC)) { + driver->ports = kcalloc(lines, sizeof(*driver->ports), + GFP_KERNEL); + if (!driver->ports) { + err = -ENOMEM; + goto err_free_all; + } + cdevs = lines; + } + + driver->cdevs = kcalloc(cdevs, sizeof(*driver->cdevs), GFP_KERNEL); + if (!driver->cdevs) { + err = -ENOMEM; + goto err_free_all; + } + return driver; +err_free_all: + kfree(driver->ports); + kfree(driver->ttys); + kfree(driver->termios); + kfree(driver); + return ERR_PTR(err); } -EXPORT_SYMBOL(__alloc_tty_driver); +EXPORT_SYMBOL(__tty_alloc_driver); static void destruct_tty_driver(struct kref *kref) { struct tty_driver *driver = container_of(kref, struct tty_driver, kref); int i; struct ktermios *tp; - void *p; if (driver->flags & TTY_DRIVER_INSTALLED) { /* @@ -3087,13 +3235,14 @@ static void destruct_tty_driver(struct kref *kref) if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV)) tty_unregister_device(driver, i); } - p = driver->ttys; proc_tty_unregister_driver(driver); - driver->ttys = NULL; - driver->termios = NULL; - kfree(p); - cdev_del(&driver->cdev); + if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC) + cdev_del(&driver->cdevs[0]); } + kfree(driver->cdevs); + kfree(driver->ports); + kfree(driver->termios); + kfree(driver->ttys); kfree(driver); } @@ -3124,15 +3273,8 @@ int tty_register_driver(struct tty_driver *driver) int error; int i; dev_t dev; - void **p = NULL; struct device *d; - if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM) && driver->num) { - p = kzalloc(driver->num * 2 * sizeof(void *), GFP_KERNEL); - if (!p) - return -ENOMEM; - } - if (!driver->major) { error = alloc_chrdev_region(&dev, driver->minor_start, driver->num, driver->name); @@ -3144,28 +3286,13 @@ int tty_register_driver(struct tty_driver *driver) dev = MKDEV(driver->major, driver->minor_start); error = register_chrdev_region(dev, driver->num, driver->name); } - if (error < 0) { - kfree(p); - return error; - } + if (error < 0) + goto err; - if (p) { - driver->ttys = (struct tty_struct **)p; - driver->termios = (struct ktermios **)(p + driver->num); - } else { - driver->ttys = NULL; - driver->termios = NULL; - } - - cdev_init(&driver->cdev, &tty_fops); - driver->cdev.owner = driver->owner; - error = cdev_add(&driver->cdev, dev, driver->num); - if (error) { - unregister_chrdev_region(dev, driver->num); - driver->ttys = NULL; - driver->termios = NULL; - kfree(p); - return error; + if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC) { + error = tty_cdev_add(driver, dev, 0, driver->num); + if (error) + goto err_unreg_char; } mutex_lock(&tty_mutex); @@ -3177,7 +3304,7 @@ int tty_register_driver(struct tty_driver *driver) d = tty_register_device(driver, i, NULL); if (IS_ERR(d)) { error = PTR_ERR(d); - goto err; + goto err_unreg_devs; } } } @@ -3185,7 +3312,7 @@ int tty_register_driver(struct tty_driver *driver) driver->flags |= TTY_DRIVER_INSTALLED; return 0; -err: +err_unreg_devs: for (i--; i >= 0; i--) tty_unregister_device(driver, i); @@ -3193,13 +3320,11 @@ err: list_del(&driver->tty_drivers); mutex_unlock(&tty_mutex); +err_unreg_char: unregister_chrdev_region(dev, driver->num); - driver->ttys = NULL; - driver->termios = NULL; - kfree(p); +err: return error; } - EXPORT_SYMBOL(tty_register_driver); /* diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index a1b9a2f68567..12b1fa0f4f86 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -410,7 +410,7 @@ EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate); void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud) { - tty_termios_encode_baud_rate(tty->termios, ibaud, obaud); + tty_termios_encode_baud_rate(&tty->termios, ibaud, obaud); } EXPORT_SYMBOL_GPL(tty_encode_baud_rate); @@ -427,7 +427,7 @@ EXPORT_SYMBOL_GPL(tty_encode_baud_rate); speed_t tty_get_baud_rate(struct tty_struct *tty) { - speed_t baud = tty_termios_baud_rate(tty->termios); + speed_t baud = tty_termios_baud_rate(&tty->termios); if (baud == 38400 && tty->alt_speed) { if (!tty->warned) { @@ -509,14 +509,14 @@ int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios) /* FIXME: we need to decide on some locking/ordering semantics for the set_termios notification eventually */ mutex_lock(&tty->termios_mutex); - old_termios = *tty->termios; - *tty->termios = *new_termios; - unset_locked_termios(tty->termios, &old_termios, tty->termios_locked); + old_termios = tty->termios; + tty->termios = *new_termios; + unset_locked_termios(&tty->termios, &old_termios, &tty->termios_locked); /* See if packet mode change of state. */ if (tty->link && tty->link->packet) { int extproc = (old_termios.c_lflag & EXTPROC) | - (tty->termios->c_lflag & EXTPROC); + (tty->termios.c_lflag & EXTPROC); int old_flow = ((old_termios.c_iflag & IXON) && (old_termios.c_cc[VSTOP] == '\023') && (old_termios.c_cc[VSTART] == '\021')); @@ -542,7 +542,7 @@ int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios) if (tty->ops->set_termios) (*tty->ops->set_termios)(tty, &old_termios); else - tty_termios_copy_hw(tty->termios, &old_termios); + tty_termios_copy_hw(&tty->termios, &old_termios); ld = tty_ldisc_ref(tty); if (ld != NULL) { @@ -578,7 +578,7 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt) return retval; mutex_lock(&tty->termios_mutex); - memcpy(&tmp_termios, tty->termios, sizeof(struct ktermios)); + tmp_termios = tty->termios; mutex_unlock(&tty->termios_mutex); if (opt & TERMIOS_TERMIO) { @@ -632,14 +632,14 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt) static void copy_termios(struct tty_struct *tty, struct ktermios *kterm) { mutex_lock(&tty->termios_mutex); - memcpy(kterm, tty->termios, sizeof(struct ktermios)); + *kterm = tty->termios; mutex_unlock(&tty->termios_mutex); } static void copy_termios_locked(struct tty_struct *tty, struct ktermios *kterm) { mutex_lock(&tty->termios_mutex); - memcpy(kterm, tty->termios_locked, sizeof(struct ktermios)); + *kterm = tty->termios_locked; mutex_unlock(&tty->termios_mutex); } @@ -707,16 +707,16 @@ static int get_sgflags(struct tty_struct *tty) { int flags = 0; - if (!(tty->termios->c_lflag & ICANON)) { - if (tty->termios->c_lflag & ISIG) + if (!(tty->termios.c_lflag & ICANON)) { + if (tty->termios.c_lflag & ISIG) flags |= 0x02; /* cbreak */ else flags |= 0x20; /* raw */ } - if (tty->termios->c_lflag & ECHO) + if (tty->termios.c_lflag & ECHO) flags |= 0x08; /* echo */ - if (tty->termios->c_oflag & OPOST) - if (tty->termios->c_oflag & ONLCR) + if (tty->termios.c_oflag & OPOST) + if (tty->termios.c_oflag & ONLCR) flags |= 0x10; /* crmod */ return flags; } @@ -726,10 +726,10 @@ static int get_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb) struct sgttyb tmp; mutex_lock(&tty->termios_mutex); - tmp.sg_ispeed = tty->termios->c_ispeed; - tmp.sg_ospeed = tty->termios->c_ospeed; - tmp.sg_erase = tty->termios->c_cc[VERASE]; - tmp.sg_kill = tty->termios->c_cc[VKILL]; + tmp.sg_ispeed = tty->termios.c_ispeed; + tmp.sg_ospeed = tty->termios.c_ospeed; + tmp.sg_erase = tty->termios.c_cc[VERASE]; + tmp.sg_kill = tty->termios.c_cc[VKILL]; tmp.sg_flags = get_sgflags(tty); mutex_unlock(&tty->termios_mutex); @@ -787,7 +787,7 @@ static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb) return -EFAULT; mutex_lock(&tty->termios_mutex); - termios = *tty->termios; + termios = tty->termios; termios.c_cc[VERASE] = tmp.sg_erase; termios.c_cc[VKILL] = tmp.sg_kill; set_sgflags(&termios, tmp.sg_flags); @@ -808,12 +808,12 @@ static int get_tchars(struct tty_struct *tty, struct tchars __user *tchars) struct tchars tmp; mutex_lock(&tty->termios_mutex); - tmp.t_intrc = tty->termios->c_cc[VINTR]; - tmp.t_quitc = tty->termios->c_cc[VQUIT]; - tmp.t_startc = tty->termios->c_cc[VSTART]; - tmp.t_stopc = tty->termios->c_cc[VSTOP]; - tmp.t_eofc = tty->termios->c_cc[VEOF]; - tmp.t_brkc = tty->termios->c_cc[VEOL2]; /* what is brkc anyway? */ + tmp.t_intrc = tty->termios.c_cc[VINTR]; + tmp.t_quitc = tty->termios.c_cc[VQUIT]; + tmp.t_startc = tty->termios.c_cc[VSTART]; + tmp.t_stopc = tty->termios.c_cc[VSTOP]; + tmp.t_eofc = tty->termios.c_cc[VEOF]; + tmp.t_brkc = tty->termios.c_cc[VEOL2]; /* what is brkc anyway? */ mutex_unlock(&tty->termios_mutex); return copy_to_user(tchars, &tmp, sizeof(tmp)) ? -EFAULT : 0; } @@ -825,12 +825,12 @@ static int set_tchars(struct tty_struct *tty, struct tchars __user *tchars) if (copy_from_user(&tmp, tchars, sizeof(tmp))) return -EFAULT; mutex_lock(&tty->termios_mutex); - tty->termios->c_cc[VINTR] = tmp.t_intrc; - tty->termios->c_cc[VQUIT] = tmp.t_quitc; - tty->termios->c_cc[VSTART] = tmp.t_startc; - tty->termios->c_cc[VSTOP] = tmp.t_stopc; - tty->termios->c_cc[VEOF] = tmp.t_eofc; - tty->termios->c_cc[VEOL2] = tmp.t_brkc; /* what is brkc anyway? */ + tty->termios.c_cc[VINTR] = tmp.t_intrc; + tty->termios.c_cc[VQUIT] = tmp.t_quitc; + tty->termios.c_cc[VSTART] = tmp.t_startc; + tty->termios.c_cc[VSTOP] = tmp.t_stopc; + tty->termios.c_cc[VEOF] = tmp.t_eofc; + tty->termios.c_cc[VEOL2] = tmp.t_brkc; /* what is brkc anyway? */ mutex_unlock(&tty->termios_mutex); return 0; } @@ -842,14 +842,14 @@ static int get_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars) struct ltchars tmp; mutex_lock(&tty->termios_mutex); - tmp.t_suspc = tty->termios->c_cc[VSUSP]; + tmp.t_suspc = tty->termios.c_cc[VSUSP]; /* what is dsuspc anyway? */ - tmp.t_dsuspc = tty->termios->c_cc[VSUSP]; - tmp.t_rprntc = tty->termios->c_cc[VREPRINT]; + tmp.t_dsuspc = tty->termios.c_cc[VSUSP]; + tmp.t_rprntc = tty->termios.c_cc[VREPRINT]; /* what is flushc anyway? */ - tmp.t_flushc = tty->termios->c_cc[VEOL2]; - tmp.t_werasc = tty->termios->c_cc[VWERASE]; - tmp.t_lnextc = tty->termios->c_cc[VLNEXT]; + tmp.t_flushc = tty->termios.c_cc[VEOL2]; + tmp.t_werasc = tty->termios.c_cc[VWERASE]; + tmp.t_lnextc = tty->termios.c_cc[VLNEXT]; mutex_unlock(&tty->termios_mutex); return copy_to_user(ltchars, &tmp, sizeof(tmp)) ? -EFAULT : 0; } @@ -862,14 +862,14 @@ static int set_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars) return -EFAULT; mutex_lock(&tty->termios_mutex); - tty->termios->c_cc[VSUSP] = tmp.t_suspc; + tty->termios.c_cc[VSUSP] = tmp.t_suspc; /* what is dsuspc anyway? */ - tty->termios->c_cc[VEOL2] = tmp.t_dsuspc; - tty->termios->c_cc[VREPRINT] = tmp.t_rprntc; + tty->termios.c_cc[VEOL2] = tmp.t_dsuspc; + tty->termios.c_cc[VREPRINT] = tmp.t_rprntc; /* what is flushc anyway? */ - tty->termios->c_cc[VEOL2] = tmp.t_flushc; - tty->termios->c_cc[VWERASE] = tmp.t_werasc; - tty->termios->c_cc[VLNEXT] = tmp.t_lnextc; + tty->termios.c_cc[VEOL2] = tmp.t_flushc; + tty->termios.c_cc[VWERASE] = tmp.t_werasc; + tty->termios.c_cc[VLNEXT] = tmp.t_lnextc; mutex_unlock(&tty->termios_mutex); return 0; } @@ -920,12 +920,12 @@ static int tty_change_softcar(struct tty_struct *tty, int arg) struct ktermios old; mutex_lock(&tty->termios_mutex); - old = *tty->termios; - tty->termios->c_cflag &= ~CLOCAL; - tty->termios->c_cflag |= bit; + old = tty->termios; + tty->termios.c_cflag &= ~CLOCAL; + tty->termios.c_cflag |= bit; if (tty->ops->set_termios) tty->ops->set_termios(tty, &old); - if ((tty->termios->c_cflag & CLOCAL) != bit) + if ((tty->termios.c_cflag & CLOCAL) != bit) ret = -EINVAL; mutex_unlock(&tty->termios_mutex); return ret; @@ -1031,7 +1031,7 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, (struct termios __user *) arg)) return -EFAULT; mutex_lock(&real_tty->termios_mutex); - memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios)); + real_tty->termios_locked = kterm; mutex_unlock(&real_tty->termios_mutex); return 0; #else @@ -1048,7 +1048,7 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, (struct termios __user *) arg)) return -EFAULT; mutex_lock(&real_tty->termios_mutex); - memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios)); + real_tty->termios_locked = kterm; mutex_unlock(&real_tty->termios_mutex); return ret; #endif diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 6f99c9959f0c..4d7b56268c79 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -413,7 +413,7 @@ EXPORT_SYMBOL_GPL(tty_ldisc_flush); static void tty_set_termios_ldisc(struct tty_struct *tty, int num) { mutex_lock(&tty->termios_mutex); - tty->termios->c_line = num; + tty->termios.c_line = num; mutex_unlock(&tty->termios_mutex); } @@ -568,7 +568,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) if (IS_ERR(new_ldisc)) return PTR_ERR(new_ldisc); - tty_lock(); + tty_lock(tty); /* * We need to look at the tty locking here for pty/tty pairs * when both sides try to change in parallel. @@ -582,12 +582,12 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) */ if (tty->ldisc->ops->num == ldisc) { - tty_unlock(); + tty_unlock(tty); tty_ldisc_put(new_ldisc); return 0; } - tty_unlock(); + tty_unlock(tty); /* * Problem: What do we do if this blocks ? * We could deadlock here @@ -595,7 +595,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) tty_wait_until_sent(tty, 0); - tty_lock(); + tty_lock(tty); mutex_lock(&tty->ldisc_mutex); /* @@ -605,10 +605,10 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) { mutex_unlock(&tty->ldisc_mutex); - tty_unlock(); + tty_unlock(tty); wait_event(tty_ldisc_wait, test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0); - tty_lock(); + tty_lock(tty); mutex_lock(&tty->ldisc_mutex); } @@ -623,7 +623,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) o_ldisc = tty->ldisc; - tty_unlock(); + tty_unlock(tty); /* * Make sure we don't change while someone holds a * reference to the line discipline. The TTY_LDISC bit @@ -650,7 +650,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) retval = tty_ldisc_wait_idle(tty, 5 * HZ); - tty_lock(); + tty_lock(tty); mutex_lock(&tty->ldisc_mutex); /* handle wait idle failure locked */ @@ -665,7 +665,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) clear_bit(TTY_LDISC_CHANGING, &tty->flags); mutex_unlock(&tty->ldisc_mutex); tty_ldisc_put(new_ldisc); - tty_unlock(); + tty_unlock(tty); return -EIO; } @@ -708,7 +708,7 @@ enable: if (o_work) schedule_work(&o_tty->buf.work); mutex_unlock(&tty->ldisc_mutex); - tty_unlock(); + tty_unlock(tty); return retval; } @@ -722,9 +722,9 @@ enable: static void tty_reset_termios(struct tty_struct *tty) { mutex_lock(&tty->termios_mutex); - *tty->termios = tty->driver->init_termios; - tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios); - tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios); + tty->termios = tty->driver->init_termios; + tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios); + tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios); mutex_unlock(&tty->termios_mutex); } @@ -816,11 +816,11 @@ void tty_ldisc_hangup(struct tty_struct *tty) * need to wait for another function taking the BTM */ clear_bit(TTY_LDISC, &tty->flags); - tty_unlock(); + tty_unlock(tty); cancel_work_sync(&tty->buf.work); mutex_unlock(&tty->ldisc_mutex); retry: - tty_lock(); + tty_lock(tty); mutex_lock(&tty->ldisc_mutex); /* At this point we have a closed ldisc and we want to @@ -831,7 +831,7 @@ retry: if (atomic_read(&tty->ldisc->users) != 1) { char cur_n[TASK_COMM_LEN], tty_n[64]; long timeout = 3 * HZ; - tty_unlock(); + tty_unlock(tty); while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) { timeout = MAX_SCHEDULE_TIMEOUT; @@ -846,7 +846,7 @@ retry: if (reset == 0) { - if (!tty_ldisc_reinit(tty, tty->termios->c_line)) + if (!tty_ldisc_reinit(tty, tty->termios.c_line)) err = tty_ldisc_open(tty, tty->ldisc); else err = 1; @@ -894,6 +894,23 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) tty_ldisc_enable(tty); return 0; } + +static void tty_ldisc_kill(struct tty_struct *tty) +{ + mutex_lock(&tty->ldisc_mutex); + /* + * Now kill off the ldisc + */ + tty_ldisc_close(tty, tty->ldisc); + tty_ldisc_put(tty->ldisc); + /* Force an oops if we mess this up */ + tty->ldisc = NULL; + + /* Ensure the next open requests the N_TTY ldisc */ + tty_set_termios_ldisc(tty, N_TTY); + mutex_unlock(&tty->ldisc_mutex); +} + /** * tty_ldisc_release - release line discipline * @tty: tty being shut down @@ -912,28 +929,21 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) * race with the set_ldisc code path. */ - tty_unlock(); + tty_lock_pair(tty, o_tty); tty_ldisc_halt(tty); tty_ldisc_flush_works(tty); - tty_lock(); - - mutex_lock(&tty->ldisc_mutex); - /* - * Now kill off the ldisc - */ - tty_ldisc_close(tty, tty->ldisc); - tty_ldisc_put(tty->ldisc); - /* Force an oops if we mess this up */ - tty->ldisc = NULL; - - /* Ensure the next open requests the N_TTY ldisc */ - tty_set_termios_ldisc(tty, N_TTY); - mutex_unlock(&tty->ldisc_mutex); + if (o_tty) { + tty_ldisc_halt(o_tty); + tty_ldisc_flush_works(o_tty); + } /* This will need doing differently if we need to lock */ + tty_ldisc_kill(tty); + if (o_tty) - tty_ldisc_release(o_tty, NULL); + tty_ldisc_kill(o_tty); + tty_unlock_pair(tty, o_tty); /* And the memory resources remaining (buffers, termios) will be disposed of when the kref hits zero */ } diff --git a/drivers/tty/tty_mutex.c b/drivers/tty/tty_mutex.c index 9ff986c32a21..67feac9e6ebb 100644 --- a/drivers/tty/tty_mutex.c +++ b/drivers/tty/tty_mutex.c @@ -4,29 +4,70 @@ #include <linux/semaphore.h> #include <linux/sched.h> -/* - * The 'big tty mutex' - * - * This mutex is taken and released by tty_lock() and tty_unlock(), - * replacing the older big kernel lock. - * It can no longer be taken recursively, and does not get - * released implicitly while sleeping. - * - * Don't use in new code. - */ -static DEFINE_MUTEX(big_tty_mutex); +/* Legacy tty mutex glue */ + +enum { + TTY_MUTEX_NORMAL, + TTY_MUTEX_NESTED, +}; /* * Getting the big tty mutex. */ -void __lockfunc tty_lock(void) + +static void __lockfunc tty_lock_nested(struct tty_struct *tty, + unsigned int subclass) { - mutex_lock(&big_tty_mutex); + if (tty->magic != TTY_MAGIC) { + printk(KERN_ERR "L Bad %p\n", tty); + WARN_ON(1); + return; + } + tty_kref_get(tty); + mutex_lock_nested(&tty->legacy_mutex, subclass); +} + +void __lockfunc tty_lock(struct tty_struct *tty) +{ + return tty_lock_nested(tty, TTY_MUTEX_NORMAL); } EXPORT_SYMBOL(tty_lock); -void __lockfunc tty_unlock(void) +void __lockfunc tty_unlock(struct tty_struct *tty) { - mutex_unlock(&big_tty_mutex); + if (tty->magic != TTY_MAGIC) { + printk(KERN_ERR "U Bad %p\n", tty); + WARN_ON(1); + return; + } + mutex_unlock(&tty->legacy_mutex); + tty_kref_put(tty); } EXPORT_SYMBOL(tty_unlock); + +/* + * Getting the big tty mutex for a pair of ttys with lock ordering + * On a non pty/tty pair tty2 can be NULL which is just fine. + */ +void __lockfunc tty_lock_pair(struct tty_struct *tty, + struct tty_struct *tty2) +{ + if (tty < tty2) { + tty_lock(tty); + tty_lock_nested(tty2, TTY_MUTEX_NESTED); + } else { + if (tty2 && tty2 != tty) + tty_lock(tty2); + tty_lock_nested(tty, TTY_MUTEX_NESTED); + } +} +EXPORT_SYMBOL(tty_lock_pair); + +void __lockfunc tty_unlock_pair(struct tty_struct *tty, + struct tty_struct *tty2) +{ + tty_unlock(tty); + if (tty2 && tty2 != tty) + tty_unlock(tty2); +} +EXPORT_SYMBOL(tty_unlock_pair); diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index bf6e238146ae..d7bdd8d0c23f 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -33,6 +33,70 @@ void tty_port_init(struct tty_port *port) } EXPORT_SYMBOL(tty_port_init); +/** + * tty_port_link_device - link tty and tty_port + * @port: tty_port of the device + * @driver: tty_driver for this device + * @index: index of the tty + * + * Provide the tty layer wit ha link from a tty (specified by @index) to a + * tty_port (@port). Use this only if neither tty_port_register_device nor + * tty_port_install is used in the driver. If used, this has to be called before + * tty_register_driver. + */ +void tty_port_link_device(struct tty_port *port, + struct tty_driver *driver, unsigned index) +{ + if (WARN_ON(index >= driver->num)) + return; + driver->ports[index] = port; +} +EXPORT_SYMBOL_GPL(tty_port_link_device); + +/** + * tty_port_register_device - register tty device + * @port: tty_port of the device + * @driver: tty_driver for this device + * @index: index of the tty + * @device: parent if exists, otherwise NULL + * + * It is the same as tty_register_device except the provided @port is linked to + * a concrete tty specified by @index. Use this or tty_port_install (or both). + * Call tty_port_link_device as a last resort. + */ +struct device *tty_port_register_device(struct tty_port *port, + struct tty_driver *driver, unsigned index, + struct device *device) +{ + tty_port_link_device(port, driver, index); + return tty_register_device(driver, index, device); +} +EXPORT_SYMBOL_GPL(tty_port_register_device); + +/** + * tty_port_register_device_attr - register tty device + * @port: tty_port of the device + * @driver: tty_driver for this device + * @index: index of the tty + * @device: parent if exists, otherwise NULL + * @drvdata: Driver data to be set to device. + * @attr_grp: Attribute group to be set on device. + * + * It is the same as tty_register_device_attr except the provided @port is + * linked to a concrete tty specified by @index. Use this or tty_port_install + * (or both). Call tty_port_link_device as a last resort. + */ +struct device *tty_port_register_device_attr(struct tty_port *port, + struct tty_driver *driver, unsigned index, + struct device *device, void *drvdata, + const struct attribute_group **attr_grp) +{ + tty_port_link_device(port, driver, index); + return tty_register_device_attr(driver, index, device, drvdata, + attr_grp); +} +EXPORT_SYMBOL_GPL(tty_port_register_device_attr); + int tty_port_alloc_xmit_buf(struct tty_port *port) { /* We may sleep in get_zeroed_page() */ @@ -230,7 +294,7 @@ int tty_port_block_til_ready(struct tty_port *port, /* block if port is in the process of being closed */ if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { - wait_event_interruptible_tty(port->close_wait, + wait_event_interruptible_tty(tty, port->close_wait, !(port->flags & ASYNC_CLOSING)); if (port->flags & ASYNC_HUP_NOTIFY) return -EAGAIN; @@ -246,7 +310,7 @@ int tty_port_block_til_ready(struct tty_port *port, } if (filp->f_flags & O_NONBLOCK) { /* Indicate we are open */ - if (tty->termios->c_cflag & CBAUD) + if (tty->termios.c_cflag & CBAUD) tty_port_raise_dtr_rts(port); port->flags |= ASYNC_NORMAL_ACTIVE; return 0; @@ -270,7 +334,7 @@ int tty_port_block_til_ready(struct tty_port *port, while (1) { /* Indicate we are open */ - if (tty->termios->c_cflag & CBAUD) + if (tty->termios.c_cflag & CBAUD) tty_port_raise_dtr_rts(port); prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE); @@ -296,9 +360,9 @@ int tty_port_block_til_ready(struct tty_port *port, retval = -ERESTARTSYS; break; } - tty_unlock(); + tty_unlock(tty); schedule(); - tty_lock(); + tty_lock(tty); } finish_wait(&port->open_wait, &wait); @@ -369,7 +433,7 @@ int tty_port_close_start(struct tty_port *port, /* Drop DTR/RTS if HUPCL is set. This causes any attached modem to hang up the line */ - if (tty->termios->c_cflag & HUPCL) + if (tty->termios.c_cflag & HUPCL) tty_port_lower_dtr_rts(port); /* Don't call port->drop for the last reference. Callers will want @@ -413,6 +477,24 @@ void tty_port_close(struct tty_port *port, struct tty_struct *tty, } EXPORT_SYMBOL(tty_port_close); +/** + * tty_port_install - generic tty->ops->install handler + * @port: tty_port of the device + * @driver: tty_driver for this device + * @tty: tty to be installed + * + * It is the same as tty_standard_install except the provided @port is linked + * to a concrete tty specified by @tty. Use this or tty_port_register_device + * (or both). Call tty_port_link_device as a last resort. + */ +int tty_port_install(struct tty_port *port, struct tty_driver *driver, + struct tty_struct *tty) +{ + tty->port = port; + return tty_standard_install(driver, tty); +} +EXPORT_SYMBOL_GPL(tty_port_install); + int tty_port_open(struct tty_port *port, struct tty_struct *tty, struct file *filp) { diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index 48cc6f25cfd3..681765baef69 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -119,6 +119,7 @@ static const int NR_TYPES = ARRAY_SIZE(max_vals); static struct input_handler kbd_handler; static DEFINE_SPINLOCK(kbd_event_lock); +static DEFINE_SPINLOCK(led_lock); static unsigned long key_down[BITS_TO_LONGS(KEY_CNT)]; /* keyboard key bitmap */ static unsigned char shift_down[NR_SHIFT]; /* shift state counters.. */ static bool dead_key_next; @@ -310,7 +311,7 @@ static void put_queue(struct vc_data *vc, int ch) if (tty) { tty_insert_flip_char(tty, ch, 0); - con_schedule_flip(tty); + tty_schedule_flip(tty); } } @@ -325,7 +326,7 @@ static void puts_queue(struct vc_data *vc, char *cp) tty_insert_flip_char(tty, *cp, 0); cp++; } - con_schedule_flip(tty); + tty_schedule_flip(tty); } static void applkey(struct vc_data *vc, int key, char mode) @@ -586,7 +587,7 @@ static void fn_send_intr(struct vc_data *vc) if (!tty) return; tty_insert_flip_char(tty, 0, TTY_BREAK); - con_schedule_flip(tty); + tty_schedule_flip(tty); } static void fn_scroll_forw(struct vc_data *vc) @@ -984,7 +985,7 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag) * or (ii) whatever pattern of lights people want to show using KDSETLED, * or (iii) specified bits of specified words in kernel memory. */ -unsigned char getledstate(void) +static unsigned char getledstate(void) { return ledstate; } @@ -992,7 +993,7 @@ unsigned char getledstate(void) void setledstate(struct kbd_struct *kbd, unsigned int led) { unsigned long flags; - spin_lock_irqsave(&kbd_event_lock, flags); + spin_lock_irqsave(&led_lock, flags); if (!(led & ~7)) { ledioctl = led; kbd->ledmode = LED_SHOW_IOCTL; @@ -1000,7 +1001,7 @@ void setledstate(struct kbd_struct *kbd, unsigned int led) kbd->ledmode = LED_SHOW_FLAGS; set_leds(); - spin_unlock_irqrestore(&kbd_event_lock, flags); + spin_unlock_irqrestore(&led_lock, flags); } static inline unsigned char getleds(void) @@ -1049,13 +1050,13 @@ static int kbd_update_leds_helper(struct input_handle *handle, void *data) */ int vt_get_leds(int console, int flag) { - unsigned long flags; struct kbd_struct * kbd = kbd_table + console; int ret; + unsigned long flags; - spin_lock_irqsave(&kbd_event_lock, flags); + spin_lock_irqsave(&led_lock, flags); ret = vc_kbd_led(kbd, flag); - spin_unlock_irqrestore(&kbd_event_lock, flags); + spin_unlock_irqrestore(&led_lock, flags); return ret; } @@ -1091,11 +1092,11 @@ void vt_set_led_state(int console, int leds) void vt_kbd_con_start(int console) { struct kbd_struct * kbd = kbd_table + console; -/* unsigned long flags; */ -/* spin_lock_irqsave(&kbd_event_lock, flags); */ + unsigned long flags; + spin_lock_irqsave(&led_lock, flags); clr_vc_kbd_led(kbd, VC_SCROLLOCK); set_leds(); -/* spin_unlock_irqrestore(&kbd_event_lock, flags); */ + spin_unlock_irqrestore(&led_lock, flags); } /** @@ -1104,21 +1105,15 @@ void vt_kbd_con_start(int console) * * Handle console stop. This is a wrapper for the VT layer * so that we can keep kbd knowledge internal - * - * FIXME: We eventually need to hold the kbd lock here to protect - * the LED updating. We can't do it yet because fn_hold calls stop_tty - * and start_tty under the kbd_event_lock, while normal tty paths - * don't hold the lock. We probably need to split out an LED lock - * but not during an -rc release! */ void vt_kbd_con_stop(int console) { struct kbd_struct * kbd = kbd_table + console; -/* unsigned long flags; */ -/* spin_lock_irqsave(&kbd_event_lock, flags); */ + unsigned long flags; + spin_lock_irqsave(&led_lock, flags); set_vc_kbd_led(kbd, VC_SCROLLOCK); set_leds(); -/* spin_unlock_irqrestore(&kbd_event_lock, flags); */ + spin_unlock_irqrestore(&led_lock, flags); } /* @@ -1130,7 +1125,12 @@ void vt_kbd_con_stop(int console) */ static void kbd_bh(unsigned long dummy) { - unsigned char leds = getleds(); + unsigned char leds; + unsigned long flags; + + spin_lock_irqsave(&led_lock, flags); + leds = getleds(); + spin_unlock_irqrestore(&led_lock, flags); if (leds != ledstate) { input_handler_for_each_handle(&kbd_handler, &leds, @@ -2035,11 +2035,11 @@ int vt_do_kdskled(int console, int cmd, unsigned long arg, int perm) return -EPERM; if (arg & ~0x77) return -EINVAL; - spin_lock_irqsave(&kbd_event_lock, flags); + spin_lock_irqsave(&led_lock, flags); kbd->ledflagstate = (arg & 7); kbd->default_ledflagstate = ((arg >> 4) & 7); set_leds(); - spin_unlock_irqrestore(&kbd_event_lock, flags); + spin_unlock_irqrestore(&led_lock, flags); return 0; /* the ioctls below only set the lights, not the functions */ @@ -2134,8 +2134,10 @@ void vt_reset_keyboard(int console) clr_vc_kbd_mode(kbd, VC_CRLF); kbd->lockstate = 0; kbd->slockstate = 0; + spin_lock(&led_lock); kbd->ledmode = LED_SHOW_FLAGS; kbd->ledflagstate = kbd->default_ledflagstate; + spin_unlock(&led_lock); /* do not do set_leds here because this causes an endless tasklet loop when the keyboard hasn't been initialized yet */ spin_unlock_irqrestore(&kbd_event_lock, flags); diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 84cbf298c094..999ca63afdef 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -537,45 +537,27 @@ void complement_pos(struct vc_data *vc, int offset) static void insert_char(struct vc_data *vc, unsigned int nr) { - unsigned short *p, *q = (unsigned short *)vc->vc_pos; + unsigned short *p = (unsigned short *) vc->vc_pos; - p = q + vc->vc_cols - nr - vc->vc_x; - while (--p >= q) - scr_writew(scr_readw(p), p + nr); - scr_memsetw(q, vc->vc_video_erase_char, nr * 2); + scr_memmovew(p + nr, p, vc->vc_cols - vc->vc_x); + scr_memsetw(p, vc->vc_video_erase_char, nr * 2); vc->vc_need_wrap = 0; - if (DO_UPDATE(vc)) { - unsigned short oldattr = vc->vc_attr; - vc->vc_sw->con_bmove(vc, vc->vc_y, vc->vc_x, vc->vc_y, vc->vc_x + nr, 1, - vc->vc_cols - vc->vc_x - nr); - vc->vc_attr = vc->vc_video_erase_char >> 8; - while (nr--) - vc->vc_sw->con_putc(vc, vc->vc_video_erase_char, vc->vc_y, vc->vc_x + nr); - vc->vc_attr = oldattr; - } + if (DO_UPDATE(vc)) + do_update_region(vc, (unsigned long) p, + (vc->vc_cols - vc->vc_x) / 2 + 1); } static void delete_char(struct vc_data *vc, unsigned int nr) { - unsigned int i = vc->vc_x; - unsigned short *p = (unsigned short *)vc->vc_pos; + unsigned short *p = (unsigned short *) vc->vc_pos; - while (++i <= vc->vc_cols - nr) { - scr_writew(scr_readw(p+nr), p); - p++; - } - scr_memsetw(p, vc->vc_video_erase_char, nr * 2); + scr_memcpyw(p, p + nr, vc->vc_cols - vc->vc_x - nr); + scr_memsetw(p + vc->vc_cols - vc->vc_x - nr, vc->vc_video_erase_char, + nr * 2); vc->vc_need_wrap = 0; - if (DO_UPDATE(vc)) { - unsigned short oldattr = vc->vc_attr; - vc->vc_sw->con_bmove(vc, vc->vc_y, vc->vc_x + nr, vc->vc_y, vc->vc_x, 1, - vc->vc_cols - vc->vc_x - nr); - vc->vc_attr = vc->vc_video_erase_char >> 8; - while (nr--) - vc->vc_sw->con_putc(vc, vc->vc_video_erase_char, vc->vc_y, - vc->vc_cols - 1 - nr); - vc->vc_attr = oldattr; - } + if (DO_UPDATE(vc)) + do_update_region(vc, (unsigned long) p, + (vc->vc_cols - vc->vc_x) / 2); } static int softcursor_original; @@ -1172,45 +1154,26 @@ static void csi_J(struct vc_data *vc, int vpar) case 0: /* erase from cursor to end of display */ count = (vc->vc_scr_end - vc->vc_pos) >> 1; start = (unsigned short *)vc->vc_pos; - if (DO_UPDATE(vc)) { - /* do in two stages */ - vc->vc_sw->con_clear(vc, vc->vc_y, vc->vc_x, 1, - vc->vc_cols - vc->vc_x); - vc->vc_sw->con_clear(vc, vc->vc_y + 1, 0, - vc->vc_rows - vc->vc_y - 1, - vc->vc_cols); - } break; case 1: /* erase from start to cursor */ count = ((vc->vc_pos - vc->vc_origin) >> 1) + 1; start = (unsigned short *)vc->vc_origin; - if (DO_UPDATE(vc)) { - /* do in two stages */ - vc->vc_sw->con_clear(vc, 0, 0, vc->vc_y, - vc->vc_cols); - vc->vc_sw->con_clear(vc, vc->vc_y, 0, 1, - vc->vc_x + 1); - } break; case 3: /* erase scroll-back buffer (and whole display) */ scr_memsetw(vc->vc_screenbuf, vc->vc_video_erase_char, vc->vc_screenbuf_size >> 1); set_origin(vc); - if (CON_IS_VISIBLE(vc)) - update_screen(vc); /* fall through */ case 2: /* erase whole display */ count = vc->vc_cols * vc->vc_rows; start = (unsigned short *)vc->vc_origin; - if (DO_UPDATE(vc)) - vc->vc_sw->con_clear(vc, 0, 0, - vc->vc_rows, - vc->vc_cols); break; default: return; } scr_memsetw(start, vc->vc_video_erase_char, 2 * count); + if (DO_UPDATE(vc)) + do_update_region(vc, (unsigned long) start, count); vc->vc_need_wrap = 0; } @@ -1223,29 +1186,22 @@ static void csi_K(struct vc_data *vc, int vpar) case 0: /* erase from cursor to end of line */ count = vc->vc_cols - vc->vc_x; start = (unsigned short *)vc->vc_pos; - if (DO_UPDATE(vc)) - vc->vc_sw->con_clear(vc, vc->vc_y, vc->vc_x, 1, - vc->vc_cols - vc->vc_x); break; case 1: /* erase from start of line to cursor */ start = (unsigned short *)(vc->vc_pos - (vc->vc_x << 1)); count = vc->vc_x + 1; - if (DO_UPDATE(vc)) - vc->vc_sw->con_clear(vc, vc->vc_y, 0, 1, - vc->vc_x + 1); break; case 2: /* erase whole line */ start = (unsigned short *)(vc->vc_pos - (vc->vc_x << 1)); count = vc->vc_cols; - if (DO_UPDATE(vc)) - vc->vc_sw->con_clear(vc, vc->vc_y, 0, 1, - vc->vc_cols); break; default: return; } scr_memsetw(start, vc->vc_video_erase_char, 2 * count); vc->vc_need_wrap = 0; + if (DO_UPDATE(vc)) + do_update_region(vc, (unsigned long) start, count); } static void csi_X(struct vc_data *vc, int vpar) /* erase the following vpar positions */ @@ -1380,7 +1336,7 @@ static void respond_string(const char *p, struct tty_struct *tty) tty_insert_flip_char(tty, *p, 0); p++; } - con_schedule_flip(tty); + tty_schedule_flip(tty); } static void cursor_report(struct vc_data *vc, struct tty_struct *tty) @@ -2792,41 +2748,52 @@ static void con_flush_chars(struct tty_struct *tty) /* * Allocate the console screen memory. */ -static int con_open(struct tty_struct *tty, struct file *filp) +static int con_install(struct tty_driver *driver, struct tty_struct *tty) { unsigned int currcons = tty->index; - int ret = 0; + struct vc_data *vc; + int ret; console_lock(); - if (tty->driver_data == NULL) { - ret = vc_allocate(currcons); - if (ret == 0) { - struct vc_data *vc = vc_cons[currcons].d; + ret = vc_allocate(currcons); + if (ret) + goto unlock; - /* Still being freed */ - if (vc->port.tty) { - console_unlock(); - return -ERESTARTSYS; - } - tty->driver_data = vc; - vc->port.tty = tty; + vc = vc_cons[currcons].d; - if (!tty->winsize.ws_row && !tty->winsize.ws_col) { - tty->winsize.ws_row = vc_cons[currcons].d->vc_rows; - tty->winsize.ws_col = vc_cons[currcons].d->vc_cols; - } - if (vc->vc_utf) - tty->termios->c_iflag |= IUTF8; - else - tty->termios->c_iflag &= ~IUTF8; - console_unlock(); - return ret; - } + /* Still being freed */ + if (vc->port.tty) { + ret = -ERESTARTSYS; + goto unlock; } + + ret = tty_port_install(&vc->port, driver, tty); + if (ret) + goto unlock; + + tty->driver_data = vc; + vc->port.tty = tty; + + if (!tty->winsize.ws_row && !tty->winsize.ws_col) { + tty->winsize.ws_row = vc_cons[currcons].d->vc_rows; + tty->winsize.ws_col = vc_cons[currcons].d->vc_cols; + } + if (vc->vc_utf) + tty->termios.c_iflag |= IUTF8; + else + tty->termios.c_iflag &= ~IUTF8; +unlock: console_unlock(); return ret; } +static int con_open(struct tty_struct *tty, struct file *filp) +{ + /* everything done in install */ + return 0; +} + + static void con_close(struct tty_struct *tty, struct file *filp) { /* Nothing to do - we defer to shutdown */ @@ -2839,7 +2806,6 @@ static void con_shutdown(struct tty_struct *tty) console_lock(); vc->port.tty = NULL; console_unlock(); - tty_shutdown(tty); } static int default_italic_color = 2; // green (ASCII) @@ -2947,6 +2913,7 @@ static int __init con_init(void) console_initcall(con_init); static const struct tty_operations con_ops = { + .install = con_install, .open = con_open, .close = con_close, .write = con_write, diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index f763ed7ba91e..ff7b5a8d501c 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -826,7 +826,7 @@ static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios_old) { struct acm *acm = tty->driver_data; - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; struct usb_cdc_line_coding newline; int newctrl = acm->ctrlout; @@ -1299,7 +1299,8 @@ skip_countries: usb_set_intfdata(data_interface, acm); usb_get_intf(control_interface); - tty_register_device(acm_tty_driver, minor, &control_interface->dev); + tty_port_register_device(&acm->port, acm_tty_driver, minor, + &control_interface->dev); return 0; alloc_fail7: diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index 5b3f5fffea92..2b5534c2ab84 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -1129,7 +1129,8 @@ int gserial_setup(struct usb_gadget *g, unsigned count) for (i = 0; i < count; i++) { struct device *tty_dev; - tty_dev = tty_register_device(gs_tty_driver, i, &g->dev); + tty_dev = tty_port_register_device(&ports[i].port->port, + gs_tty_driver, i, &g->dev); if (IS_ERR(tty_dev)) pr_warning("%s: no classdev for port %d, err %ld\n", __func__, i, PTR_ERR(tty_dev)); diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index f8ce97d8b0ad..3b98fb733362 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -215,7 +215,7 @@ static void ark3116_release(struct usb_serial *serial) static void ark3116_init_termios(struct tty_struct *tty) { - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; *termios = tty_std_termios; termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; @@ -229,7 +229,7 @@ static void ark3116_set_termios(struct tty_struct *tty, { struct usb_serial *serial = port->serial; struct ark3116_private *priv = usb_get_serial_port_data(port); - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; unsigned int cflag = termios->c_cflag; int bps = tty_get_baud_rate(tty); int quot; diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 6b7365632951..a46df73ee96e 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -307,7 +307,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty, unsigned long control_state; int bad_flow_control; speed_t baud; - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; iflag = termios->c_iflag; cflag = termios->c_cflag; diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index b9cca6dcde07..9a564286bfd7 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -165,8 +165,8 @@ static int usb_console_setup(struct console *co, char *options) } if (serial->type->set_termios) { - tty->termios->c_cflag = cflag; - tty_termios_encode_baud_rate(tty->termios, baud, baud); + tty->termios.c_cflag = cflag; + tty_termios_encode_baud_rate(&tty->termios, baud, baud); memset(&dummy, 0, sizeof(struct ktermios)); serial->type->set_termios(tty, port, &dummy); diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 1e71079ce33b..ba5e07e188a0 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -469,7 +469,7 @@ static void cp210x_get_termios(struct tty_struct *tty, if (tty) { cp210x_get_termios_port(tty->driver_data, - &tty->termios->c_cflag, &baud); + &tty->termios.c_cflag, &baud); tty_encode_baud_rate(tty, baud, baud); } @@ -631,7 +631,7 @@ static void cp210x_change_speed(struct tty_struct *tty, { u32 baud; - baud = tty->termios->c_ospeed; + baud = tty->termios.c_ospeed; /* This maps the requested rate to a rate valid on cp2102 or cp2103, * or to an arbitrary rate in [1M,2M]. @@ -665,10 +665,10 @@ static void cp210x_set_termios(struct tty_struct *tty, if (!tty) return; - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; old_cflag = old_termios->c_cflag; - if (tty->termios->c_ospeed != old_termios->c_ospeed) + if (tty->termios.c_ospeed != old_termios->c_ospeed) cp210x_change_speed(tty, port, old_termios); /* If the number of data bits is to be updated */ diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index b78c34eb5d3f..be34f153e566 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -922,38 +922,38 @@ static void cypress_set_termios(struct tty_struct *tty, early enough */ if (!priv->termios_initialized) { if (priv->chiptype == CT_EARTHMATE) { - *(tty->termios) = tty_std_termios; - tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL | + tty->termios = tty_std_termios; + tty->termios.c_cflag = B4800 | CS8 | CREAD | HUPCL | CLOCAL; - tty->termios->c_ispeed = 4800; - tty->termios->c_ospeed = 4800; + tty->termios.c_ispeed = 4800; + tty->termios.c_ospeed = 4800; } else if (priv->chiptype == CT_CYPHIDCOM) { - *(tty->termios) = tty_std_termios; - tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | + tty->termios = tty_std_termios; + tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - tty->termios->c_ispeed = 9600; - tty->termios->c_ospeed = 9600; + tty->termios.c_ispeed = 9600; + tty->termios.c_ospeed = 9600; } else if (priv->chiptype == CT_CA42V2) { - *(tty->termios) = tty_std_termios; - tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | + tty->termios = tty_std_termios; + tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - tty->termios->c_ispeed = 9600; - tty->termios->c_ospeed = 9600; + tty->termios.c_ispeed = 9600; + tty->termios.c_ospeed = 9600; } priv->termios_initialized = 1; } spin_unlock_irqrestore(&priv->lock, flags); /* Unsupported features need clearing */ - tty->termios->c_cflag &= ~(CMSPAR|CRTSCTS); + tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS); - cflag = tty->termios->c_cflag; - iflag = tty->termios->c_iflag; + cflag = tty->termios.c_cflag; + iflag = tty->termios.c_iflag; /* check if there are new settings */ if (old_termios) { spin_lock_irqsave(&priv->lock, flags); - priv->tmp_termios = *(tty->termios); + priv->tmp_termios = tty->termios; spin_unlock_irqrestore(&priv->lock, flags); } @@ -1021,7 +1021,7 @@ static void cypress_set_termios(struct tty_struct *tty, "4800bps."); /* define custom termios settings for NMEA protocol */ - tty->termios->c_iflag /* input modes - */ + tty->termios.c_iflag /* input modes - */ &= ~(IGNBRK /* disable ignore break */ | BRKINT /* disable break causes interrupt */ | PARMRK /* disable mark parity errors */ @@ -1031,10 +1031,10 @@ static void cypress_set_termios(struct tty_struct *tty, | ICRNL /* disable translate CR to NL */ | IXON); /* disable enable XON/XOFF flow control */ - tty->termios->c_oflag /* output modes */ + tty->termios.c_oflag /* output modes */ &= ~OPOST; /* disable postprocess output char */ - tty->termios->c_lflag /* line discipline modes */ + tty->termios.c_lflag /* line discipline modes */ &= ~(ECHO /* disable echo input characters */ | ECHONL /* disable echo new line */ | ICANON /* disable erase, kill, werase, and rprnt @@ -1200,7 +1200,7 @@ static void cypress_read_int_callback(struct urb *urb) /* hangup, as defined in acm.c... this might be a bad place for it * though */ - if (tty && !(tty->termios->c_cflag & CLOCAL) && + if (tty && !(tty->termios.c_cflag & CLOCAL) && !(priv->current_status & UART_CD)) { dbg("%s - calling hangup", __func__); tty_hangup(tty); diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index b5cd838093ef..afd9d2ec577b 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -687,8 +687,8 @@ static void digi_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct digi_port *priv = usb_get_serial_port_data(port); - unsigned int iflag = tty->termios->c_iflag; - unsigned int cflag = tty->termios->c_cflag; + unsigned int iflag = tty->termios.c_iflag; + unsigned int cflag = tty->termios.c_cflag; unsigned int old_iflag = old_termios->c_iflag; unsigned int old_cflag = old_termios->c_cflag; unsigned char buf[32]; @@ -709,7 +709,7 @@ static void digi_set_termios(struct tty_struct *tty, /* don't set RTS if using hardware flow control */ /* and throttling input */ modem_signals = TIOCM_DTR; - if (!(tty->termios->c_cflag & CRTSCTS) || + if (!(tty->termios.c_cflag & CRTSCTS) || !test_bit(TTY_THROTTLED, &tty->flags)) modem_signals |= TIOCM_RTS; digi_set_modem_signals(port, modem_signals, 1); @@ -748,7 +748,7 @@ static void digi_set_termios(struct tty_struct *tty, } } /* set parity */ - tty->termios->c_cflag &= ~CMSPAR; + tty->termios.c_cflag &= ~CMSPAR; if ((cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD))) { if (cflag&PARENB) { @@ -1124,8 +1124,8 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port) /* set termios settings */ if (tty) { - not_termios.c_cflag = ~tty->termios->c_cflag; - not_termios.c_iflag = ~tty->termios->c_iflag; + not_termios.c_cflag = ~tty->termios.c_cflag; + not_termios.c_iflag = ~tty->termios.c_iflag; digi_set_termios(tty, port, ¬_termios); } return 0; @@ -1500,7 +1500,7 @@ static int digi_read_oob_callback(struct urb *urb) rts = 0; if (tty) - rts = tty->termios->c_cflag & CRTSCTS; + rts = tty->termios.c_cflag & CRTSCTS; if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) { spin_lock(&priv->dp_port_lock); diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index cdf61dd07318..34e86383090a 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -87,7 +87,7 @@ static int empeg_startup(struct usb_serial *serial) static void empeg_init_termios(struct tty_struct *tty) { - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; /* * The empeg-car player wants these particular tty settings. diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index 499b15fd82f1..79451ee12ca0 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -173,10 +173,11 @@ static void f81232_set_termios(struct tty_struct *tty, /* FIXME - Stubbed out for now */ /* Don't change anything if nothing has changed */ - if (!tty_termios_hw_change(tty->termios, old_termios)) + if (!tty_termios_hw_change(&tty->termios, old_termios)) return; /* Do the real work here... */ + tty_termios_copy_hw(&tty->termios, old_termios); } static int f81232_tiocmget(struct tty_struct *tty) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 5620db6469e5..24e3e19849a2 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -2082,7 +2082,7 @@ static void ftdi_set_termios(struct tty_struct *tty, { struct usb_device *dev = port->serial->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; unsigned int cflag = termios->c_cflag; __u16 urb_value; /* will hold the new flags */ diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index e1f5ccd1e8f8..f435575c4e6e 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -1458,7 +1458,7 @@ static void edge_throttle(struct tty_struct *tty) } /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { edge_port->shadowMCR &= ~MCR_RTS; status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR); @@ -1497,7 +1497,7 @@ static void edge_unthrottle(struct tty_struct *tty) return; } /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { edge_port->shadowMCR |= MCR_RTS; send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR); @@ -1516,9 +1516,9 @@ static void edge_set_termios(struct tty_struct *tty, struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned int cflag; - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; dbg("%s - clfag %08x iflag %08x", __func__, - tty->termios->c_cflag, tty->termios->c_iflag); + tty->termios.c_cflag, tty->termios.c_iflag); dbg("%s - old clfag %08x old iflag %08x", __func__, old_termios->c_cflag, old_termios->c_iflag); @@ -1987,7 +1987,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, tty = tty_port_tty_get(&edge_port->port->port); if (tty) { change_port_settings(tty, - edge_port, tty->termios); + edge_port, &tty->termios); tty_kref_put(tty); } @@ -2570,7 +2570,7 @@ static void change_port_settings(struct tty_struct *tty, return; } - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; switch (cflag & CSIZE) { case CS5: diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 3936904c6419..765978ae752e 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -1870,7 +1870,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) /* set up the port settings */ if (tty) - edge_set_termios(tty, port, tty->termios); + edge_set_termios(tty, port, &tty->termios); /* open up the port */ @@ -2272,13 +2272,13 @@ static void change_port_settings(struct tty_struct *tty, config = kmalloc (sizeof (*config), GFP_KERNEL); if (!config) { - *tty->termios = *old_termios; + tty->termios = *old_termios; dev_err(&edge_port->port->dev, "%s - out of memory\n", __func__); return; } - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; config->wFlags = 0; @@ -2362,7 +2362,7 @@ static void change_port_settings(struct tty_struct *tty, } else dbg("%s - OUTBOUND XON/XOFF is disabled", __func__); - tty->termios->c_cflag &= ~CMSPAR; + tty->termios.c_cflag &= ~CMSPAR; /* Round the baud rate */ baud = tty_get_baud_rate(tty); @@ -2408,10 +2408,10 @@ static void edge_set_termios(struct tty_struct *tty, struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned int cflag; - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; dbg("%s - clfag %08x iflag %08x", __func__, - tty->termios->c_cflag, tty->termios->c_iflag); + tty->termios.c_cflag, tty->termios.c_iflag); dbg("%s - old clfag %08x old iflag %08x", __func__, old_termios->c_cflag, old_termios->c_iflag); dbg("%s - port %d", __func__, port->number); diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index fc09414c960f..5a96692b12a2 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -381,7 +381,7 @@ static void ir_set_termios(struct tty_struct *tty, ir_xbof = ir_xbof_change(xbof) ; /* Only speed changes are supported */ - tty_termios_copy_hw(tty->termios, old_termios); + tty_termios_copy_hw(&tty->termios, old_termios); tty_encode_baud_rate(tty, baud, baud); /* diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 22b1eb5040b7..bf3864045c18 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -921,7 +921,7 @@ static void iuu_set_termios(struct tty_struct *tty, { const u32 supported_mask = CMSPAR|PARENB|PARODD; struct iuu_private *priv = usb_get_serial_port_data(port); - unsigned int cflag = tty->termios->c_cflag; + unsigned int cflag = tty->termios.c_cflag; int status; u32 actual; u32 parity; @@ -930,7 +930,7 @@ static void iuu_set_termios(struct tty_struct *tty, u32 newval = cflag & supported_mask; /* Just use the ospeed. ispeed should be the same. */ - baud = tty->termios->c_ospeed; + baud = tty->termios.c_ospeed; dbg("%s - enter c_ospeed or baud=%d", __func__, baud); @@ -961,13 +961,13 @@ static void iuu_set_termios(struct tty_struct *tty, * settings back over and then adjust them */ if (old_termios) - tty_termios_copy_hw(tty->termios, old_termios); + tty_termios_copy_hw(&tty->termios, old_termios); if (status != 0) /* Set failed - return old bits */ return; /* Re-encode speed, parity and csize */ tty_encode_baud_rate(tty, baud, baud); - tty->termios->c_cflag &= ~(supported_mask|CSIZE); - tty->termios->c_cflag |= newval | csize; + tty->termios.c_cflag &= ~(supported_mask|CSIZE); + tty->termios.c_cflag |= newval | csize; } static void iuu_close(struct usb_serial_port *port) @@ -993,14 +993,14 @@ static void iuu_close(struct usb_serial_port *port) static void iuu_init_termios(struct tty_struct *tty) { - *(tty->termios) = tty_std_termios; - tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600 + tty->termios = tty_std_termios; + tty->termios.c_cflag = CLOCAL | CREAD | CS8 | B9600 | TIOCM_CTS | CSTOPB | PARENB; - tty->termios->c_ispeed = 9600; - tty->termios->c_ospeed = 9600; - tty->termios->c_lflag = 0; - tty->termios->c_oflag = 0; - tty->termios->c_iflag = 0; + tty->termios.c_ispeed = 9600; + tty->termios.c_ospeed = 9600; + tty->termios.c_lflag = 0; + tty->termios.c_oflag = 0; + tty->termios.c_iflag = 0; } static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) @@ -1012,8 +1012,8 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) u32 actual; struct iuu_private *priv = usb_get_serial_port_data(port); - baud = tty->termios->c_ospeed; - tty->termios->c_ispeed = baud; + baud = tty->termios.c_ospeed; + tty->termios.c_ispeed = baud; /* Re-encode speed */ tty_encode_baud_rate(tty, baud, baud); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index af0b70eaf032..7bcbb47e1449 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -158,7 +158,7 @@ static void keyspan_set_termios(struct tty_struct *tty, p_priv = usb_get_serial_port_data(port); d_details = p_priv->device_details; - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; device_port = port->number - port->serial->minor; /* Baud rate calculation takes baud rate as an integer @@ -179,7 +179,7 @@ static void keyspan_set_termios(struct tty_struct *tty, p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none; /* Mark/Space not supported */ - tty->termios->c_cflag &= ~CMSPAR; + tty->termios.c_cflag &= ~CMSPAR; keyspan_send_setup(port, 0); } @@ -1086,7 +1086,7 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port) device_port = port->number - port->serial->minor; if (tty) { - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; /* Baud rate calculation takes baud rate as an integer so other rates can be generated if desired. */ baud_rate = tty_get_baud_rate(tty); diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index a4ac3cfeffc4..dcada8615fcf 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -338,7 +338,7 @@ static void keyspan_pda_set_termios(struct tty_struct *tty, 7[EOMS]1: 10 bit, b0/b7 is parity 7[EOMS]2: 11 bit, b0/b7 is parity, extra bit always (mark?) - HW flow control is dictated by the tty->termios->c_cflags & CRTSCTS + HW flow control is dictated by the tty->termios.c_cflags & CRTSCTS bit. For now, just do baud. */ @@ -353,7 +353,7 @@ static void keyspan_pda_set_termios(struct tty_struct *tty, } /* Only speed can change so copy the old h/w parameters then encode the new speed */ - tty_termios_copy_hw(tty->termios, old_termios); + tty_termios_copy_hw(&tty->termios, old_termios); tty_encode_baud_rate(tty, speed, speed); } diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 5bed59cd5776..def9ad258715 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -311,12 +311,12 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) /* set up termios structure */ spin_lock_irqsave(&priv->lock, flags); - priv->termios.c_iflag = tty->termios->c_iflag; - priv->termios.c_oflag = tty->termios->c_oflag; - priv->termios.c_cflag = tty->termios->c_cflag; - priv->termios.c_lflag = tty->termios->c_lflag; + priv->termios.c_iflag = tty->termios.c_iflag; + priv->termios.c_oflag = tty->termios.c_oflag; + priv->termios.c_cflag = tty->termios.c_cflag; + priv->termios.c_lflag = tty->termios.c_lflag; for (i = 0; i < NCCS; i++) - priv->termios.c_cc[i] = tty->termios->c_cc[i]; + priv->termios.c_cc[i] = tty->termios.c_cc[i]; priv->cfg.pktlen = cfg->pktlen; priv->cfg.baudrate = cfg->baudrate; priv->cfg.databits = cfg->databits; @@ -445,9 +445,9 @@ static void klsi_105_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { struct klsi_105_private *priv = usb_get_serial_port_data(port); - unsigned int iflag = tty->termios->c_iflag; + unsigned int iflag = tty->termios.c_iflag; unsigned int old_iflag = old_termios->c_iflag; - unsigned int cflag = tty->termios->c_cflag; + unsigned int cflag = tty->termios.c_cflag; unsigned int old_cflag = old_termios->c_cflag; struct klsi_105_port_settings *cfg; unsigned long flags; @@ -560,7 +560,7 @@ static void klsi_105_set_termios(struct tty_struct *tty, if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD)) || (cflag & CSTOPB) != (old_cflag & CSTOPB)) { /* Not currently supported */ - tty->termios->c_cflag &= ~(PARENB|PARODD|CSTOPB); + tty->termios.c_cflag &= ~(PARENB|PARODD|CSTOPB); #if 0 priv->last_lcr = 0; @@ -587,7 +587,7 @@ static void klsi_105_set_termios(struct tty_struct *tty, || (iflag & IXON) != (old_iflag & IXON) || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { /* Not currently supported */ - tty->termios->c_cflag &= ~CRTSCTS; + tty->termios.c_cflag &= ~CRTSCTS; /* Drop DTR/RTS if no flow control otherwise assert */ #if 0 if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS)) diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index fafeabb64c55..bf5c74965d34 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -191,11 +191,11 @@ static void kobil_release(struct usb_serial *serial) static void kobil_init_termios(struct tty_struct *tty) { /* Default to echo off and other sane device settings */ - tty->termios->c_lflag = 0; - tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE); - tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF; + tty->termios.c_lflag = 0; + tty->termios.c_iflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE); + tty->termios.c_iflag |= IGNBRK | IGNPAR | IXOFF; /* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */ - tty->termios->c_oflag &= ~ONLCR; + tty->termios.c_oflag &= ~ONLCR; } static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) @@ -581,14 +581,14 @@ static void kobil_set_termios(struct tty_struct *tty, struct kobil_private *priv; int result; unsigned short urb_val = 0; - int c_cflag = tty->termios->c_cflag; + int c_cflag = tty->termios.c_cflag; speed_t speed; priv = usb_get_serial_port_data(port); if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) { /* This device doesn't support ioctl calls */ - *tty->termios = *old; + tty_termios_copy_hw(&tty->termios, old); return; } @@ -612,7 +612,7 @@ static void kobil_set_termios(struct tty_struct *tty, urb_val |= SUSBCR_SPASB_EvenParity; } else urb_val |= SUSBCR_SPASB_NoParity; - tty->termios->c_cflag &= ~CMSPAR; + tty->termios.c_cflag &= ~CMSPAR; tty_encode_baud_rate(tty, speed, speed); result = usb_control_msg(port->serial->dev, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index a71fa0aa0406..df98cffdba65 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -454,7 +454,7 @@ static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port) * either. */ spin_lock_irqsave(&priv->lock, flags); - if (tty && (tty->termios->c_cflag & CBAUD)) + if (tty && (tty->termios.c_cflag & CBAUD)) priv->control_state = TIOCM_DTR | TIOCM_RTS; else priv->control_state = 0; @@ -634,7 +634,7 @@ static void mct_u232_set_termios(struct tty_struct *tty, { struct usb_serial *serial = port->serial; struct mct_u232_private *priv = usb_get_serial_port_data(port); - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; unsigned int cflag = termios->c_cflag; unsigned int old_cflag = old_termios->c_cflag; unsigned long flags; diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index d47eb06fe463..2b0627b5fe2c 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -130,12 +130,6 @@ static void metrousb_read_int_callback(struct urb *urb) /* Set the data read from the usb port into the serial port buffer. */ tty = tty_port_tty_get(&port->port); - if (!tty) { - dev_err(&port->dev, "%s - bad tty pointer - exiting\n", - __func__); - return; - } - if (tty && urb->actual_length) { /* Loop through the data copying each byte to the tty layer. */ tty_insert_flip_string(tty, data, urb->actual_length); diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index a07dd3c8cfef..012f67b2e4cc 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1349,7 +1349,7 @@ static void mos7720_throttle(struct tty_struct *tty) } /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { mos7720_port->shadowMCR &= ~UART_MCR_RTS; write_mos_reg(port->serial, port->number - port->serial->minor, MCR, mos7720_port->shadowMCR); @@ -1383,7 +1383,7 @@ static void mos7720_unthrottle(struct tty_struct *tty) } /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { mos7720_port->shadowMCR |= UART_MCR_RTS; write_mos_reg(port->serial, port->number - port->serial->minor, MCR, mos7720_port->shadowMCR); @@ -1604,8 +1604,8 @@ static void change_port_settings(struct tty_struct *tty, lStop = 0x00; /* 1 stop bit */ lParity = 0x00; /* No parity */ - cflag = tty->termios->c_cflag; - iflag = tty->termios->c_iflag; + cflag = tty->termios.c_cflag; + iflag = tty->termios.c_iflag; /* Change the number of bits */ switch (cflag & CSIZE) { @@ -1753,11 +1753,11 @@ static void mos7720_set_termios(struct tty_struct *tty, dbg("%s\n", "setting termios - ASPIRE"); - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; dbg("%s - cflag %08x iflag %08x", __func__, - tty->termios->c_cflag, - RELEVANT_IFLAG(tty->termios->c_iflag)); + tty->termios.c_cflag, + RELEVANT_IFLAG(tty->termios.c_iflag)); dbg("%s - old cflag %08x old iflag %08x", __func__, old_termios->c_cflag, diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 2f6da1e89bfa..402c32d7accb 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1651,7 +1651,7 @@ static void mos7840_throttle(struct tty_struct *tty) return; } /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { mos7840_port->shadowMCR &= ~MCR_RTS; status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mos7840_port->shadowMCR); @@ -1694,7 +1694,7 @@ static void mos7840_unthrottle(struct tty_struct *tty) } /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { mos7840_port->shadowMCR |= MCR_RTS; status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mos7840_port->shadowMCR); @@ -2000,8 +2000,8 @@ static void mos7840_change_port_settings(struct tty_struct *tty, lStop = LCR_STOP_1; lParity = LCR_PAR_NONE; - cflag = tty->termios->c_cflag; - iflag = tty->termios->c_iflag; + cflag = tty->termios.c_cflag; + iflag = tty->termios.c_iflag; /* Change the number of bits */ if (cflag & CSIZE) { @@ -2161,10 +2161,10 @@ static void mos7840_set_termios(struct tty_struct *tty, dbg("%s", "setting termios - "); - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; dbg("%s - clfag %08x iflag %08x", __func__, - tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag)); + tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag)); dbg("%s - old clfag %08x old iflag %08x", __func__, old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); dbg("%s - port %d", __func__, port->number); diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 5976b65ab6ee..9f555560bfbf 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -404,10 +404,10 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty) static void oti6858_init_termios(struct tty_struct *tty) { - *(tty->termios) = tty_std_termios; - tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL; - tty->termios->c_ispeed = 38400; - tty->termios->c_ospeed = 38400; + tty->termios = tty_std_termios; + tty->termios.c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL; + tty->termios.c_ispeed = 38400; + tty->termios.c_ospeed = 38400; } static void oti6858_set_termios(struct tty_struct *tty, @@ -425,7 +425,7 @@ static void oti6858_set_termios(struct tty_struct *tty, return; } - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; spin_lock_irqsave(&priv->lock, flags); divisor = priv->pending_setup.divisor; diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 13b8dd6481f5..2b9108a8ea64 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -260,16 +260,16 @@ static void pl2303_set_termios(struct tty_struct *tty, serial settings even to the same values as before. Thus we actually need to filter in this specific case */ - if (!tty_termios_hw_change(tty->termios, old_termios)) + if (!tty_termios_hw_change(&tty->termios, old_termios)) return; - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; buf = kzalloc(7, GFP_KERNEL); if (!buf) { dev_err(&port->dev, "%s - out of memory.\n", __func__); /* Report back no change occurred */ - *tty->termios = *old_termios; + tty->termios = *old_termios; return; } diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index 151670b6b72a..7df9cdb053ed 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -275,7 +275,7 @@ static void qt2_set_termios(struct tty_struct *tty, { struct usb_device *dev = port->serial->dev; struct qt2_port_private *port_priv; - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; u16 baud; unsigned int cflag = termios->c_cflag; u16 new_lcr = 0; @@ -406,7 +406,7 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port) port_priv->device_port = (u8) device_port; if (tty) - qt2_set_termios(tty, port, tty->termios); + qt2_set_termios(tty, port, &tty->termios); return 0; diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 0274710cced5..b14ebbd73567 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -382,7 +382,7 @@ static int sierra_send_setup(struct usb_serial_port *port) static void sierra_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { - tty_termios_copy_hw(tty->termios, old_termios); + tty_termios_copy_hw(&tty->termios, old_termios); sierra_send_setup(port); } diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index cad608984710..ab68a4d74d61 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -316,10 +316,10 @@ static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on) static void spcp8x5_init_termios(struct tty_struct *tty) { /* for the 1st time call this function */ - *(tty->termios) = tty_std_termios; - tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; - tty->termios->c_ispeed = 115200; - tty->termios->c_ospeed = 115200; + tty->termios = tty_std_termios; + tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; + tty->termios.c_ispeed = 115200; + tty->termios.c_ospeed = 115200; } /* set the serial param for transfer. we should check if we really need to @@ -330,7 +330,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty, struct usb_serial *serial = port->serial; struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; - unsigned int cflag = tty->termios->c_cflag; + unsigned int cflag = tty->termios.c_cflag; unsigned int old_cflag = old_termios->c_cflag; unsigned short uartdata; unsigned char buf[2] = {0, 0}; @@ -340,7 +340,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty, /* check that they really want us to change something */ - if (!tty_termios_hw_change(tty->termios, old_termios)) + if (!tty_termios_hw_change(&tty->termios, old_termios)) return; /* set DTR/RTS active */ diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 3fee23bf0c14..cf2d30cf7588 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -216,7 +216,7 @@ static void ssu100_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { struct usb_device *dev = port->serial->dev; - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; u16 baud, divisor, remainder; unsigned int cflag = termios->c_cflag; u16 urb_value = 0; /* will hold the new flags */ @@ -322,7 +322,7 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) dbg("%s - set uart failed", __func__); if (tty) - ssu100_set_termios(tty, port, tty->termios); + ssu100_set_termios(tty, port, &tty->termios); return usb_serial_generic_open(tty, port); } diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index a4404f5ad68e..f502a16aac21 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -520,7 +520,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) } if (tty) - ti_set_termios(tty, port, tty->termios); + ti_set_termios(tty, port, &tty->termios); dbg("%s - sending TI_OPEN_PORT", __func__); status = ti_command_out_sync(tdev, TI_OPEN_PORT, @@ -562,7 +562,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) usb_clear_halt(dev, port->read_urb->pipe); if (tty) - ti_set_termios(tty, port, tty->termios); + ti_set_termios(tty, port, &tty->termios); dbg("%s - sending TI_OPEN_PORT (2)", __func__); status = ti_command_out_sync(tdev, TI_OPEN_PORT, @@ -831,8 +831,8 @@ static void ti_set_termios(struct tty_struct *tty, int port_number = port->number - port->serial->minor; unsigned int mcr; - cflag = tty->termios->c_cflag; - iflag = tty->termios->c_iflag; + cflag = tty->termios.c_cflag; + iflag = tty->termios.c_iflag; dbg("%s - cflag %08x, iflag %08x", __func__, cflag, iflag); dbg("%s - old clfag %08x, old iflag %08x", __func__, @@ -871,7 +871,7 @@ static void ti_set_termios(struct tty_struct *tty, } /* CMSPAR isn't supported by this driver */ - tty->termios->c_cflag &= ~CMSPAR; + tty->termios.c_cflag &= ~CMSPAR; if (cflag & PARENB) { if (cflag & PARODD) { diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 27483f91a4a3..aa4b0d775992 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -207,7 +207,7 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty) if (retval) goto error_get_interface; - retval = tty_standard_install(driver, tty); + retval = tty_port_install(&port->port, driver, tty); if (retval) goto error_init_termios; @@ -305,8 +305,7 @@ static void serial_close(struct tty_struct *tty, struct file *filp) * Do the resource freeing and refcount dropping for the port. * Avoid freeing the console. * - * Called asynchronously after the last tty kref is dropped, - * and the tty layer has already done the tty_shutdown(tty); + * Called asynchronously after the last tty kref is dropped. */ static void serial_cleanup(struct tty_struct *tty) { @@ -423,7 +422,7 @@ static void serial_set_termios(struct tty_struct *tty, struct ktermios *old) if (port->serial->type->set_termios) port->serial->type->set_termios(tty, port, old); else - tty_termios_copy_hw(tty->termios, old); + tty_termios_copy_hw(&tty->termios, old); } static int serial_break(struct tty_struct *tty, int break_state) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 6855d5ed0331..72b678d90831 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -67,7 +67,7 @@ void usb_wwan_set_termios(struct tty_struct *tty, struct usb_wwan_intf_private *intfdata = port->serial->private; /* Doesn't support option setting */ - tty_termios_copy_hw(tty->termios, old_termios); + tty_termios_copy_hw(&tty->termios, old_termios); if (intfdata->send_setup) intfdata->send_setup(port); diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 473635e7f5db..b36077de72b9 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -724,7 +724,7 @@ static void firm_setup_port(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct whiteheat_port_settings port_settings; - unsigned int cflag = tty->termios->c_cflag; + unsigned int cflag = tty->termios.c_cflag; port_settings.port = port->number + 1; diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c index 77da6a2f43dc..c03ecdd31e4c 100644 --- a/drivers/video/auo_k190x.c +++ b/drivers/video/auo_k190x.c @@ -987,7 +987,6 @@ err_regfb: fb_dealloc_cmap(&info->cmap); err_cmap: fb_deferred_io_cleanup(info); - kfree(info->fbdefio); err_defio: vfree((void *)info->screen_base); err_irq: @@ -1022,7 +1021,6 @@ int __devexit auok190x_common_remove(struct platform_device *pdev) fb_dealloc_cmap(&info->cmap); fb_deferred_io_cleanup(info); - kfree(info->fbdefio); vfree((void *)info->screen_base); diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c index bfdc5fbeaa11..92257ef19403 100644 --- a/drivers/video/backlight/omap1_bl.c +++ b/drivers/video/backlight/omap1_bl.c @@ -27,9 +27,9 @@ #include <linux/fb.h> #include <linux/backlight.h> #include <linux/slab.h> +#include <linux/platform_data/omap1_bl.h> #include <mach/hardware.h> -#include <plat/board.h> #include <plat/mux.h> #define OMAPBL_MAX_INTENSITY 0xff diff --git a/drivers/video/console/bitblit.c b/drivers/video/console/bitblit.c index 28b1a834906b..61b182bf32a2 100644 --- a/drivers/video/console/bitblit.c +++ b/drivers/video/console/bitblit.c @@ -162,7 +162,7 @@ static void bit_putcs(struct vc_data *vc, struct fb_info *info, image.depth = 1; if (attribute) { - buf = kmalloc(cellsize, GFP_KERNEL); + buf = kmalloc(cellsize, GFP_ATOMIC); if (!buf) return; } diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 88e92041d8f0..fdefa8fd72c4 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -449,7 +449,7 @@ static int __init fb_console_setup(char *this_opt) while ((options = strsep(&this_opt, ",")) != NULL) { if (!strncmp(options, "font:", 5)) - strcpy(fontname, options + 5); + strlcpy(fontname, options + 5, sizeof(fontname)); if (!strncmp(options, "scrollback:", 11)) { options += 11; diff --git a/drivers/video/mb862xx/mb862xxfbdrv.c b/drivers/video/mb862xx/mb862xxfbdrv.c index 00ce1f34b496..57d940be5f3d 100644 --- a/drivers/video/mb862xx/mb862xxfbdrv.c +++ b/drivers/video/mb862xx/mb862xxfbdrv.c @@ -328,6 +328,8 @@ static int mb862xxfb_ioctl(struct fb_info *fbi, unsigned int cmd, case MB862XX_L1_SET_CFG: if (copy_from_user(l1_cfg, argp, sizeof(*l1_cfg))) return -EFAULT; + if (l1_cfg->dh == 0 || l1_cfg->dw == 0) + return -EINVAL; if ((l1_cfg->sw >= l1_cfg->dw) && (l1_cfg->sh >= l1_cfg->dh)) { /* downscaling */ outreg(cap, GC_CAP_CSC, diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index 5b289c5f695b..ee9e29639dcc 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -37,6 +37,7 @@ #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <plat/cpu.h> #include <plat/clock.h> #include <video/omapdss.h> diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c index 5d31699fbd3c..f43bfe17b3b6 100644 --- a/drivers/video/omap2/dss/sdi.c +++ b/drivers/video/omap2/dss/sdi.c @@ -105,6 +105,20 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev) sdi_config_lcd_manager(dssdev); + /* + * LCLK and PCLK divisors are located in shadow registers, and we + * normally write them to DISPC registers when enabling the output. + * However, SDI uses pck-free as source clock for its PLL, and pck-free + * is affected by the divisors. And as we need the PLL before enabling + * the output, we need to write the divisors early. + * + * It seems just writing to the DISPC register is enough, and we don't + * need to care about the shadow register mechanism for pck-free. The + * exact reason for this is unknown. + */ + dispc_mgr_set_clock_div(dssdev->manager->id, + &sdi.mgr_config.clock_info); + dss_sdi_init(dssdev->phy.sdi.datapairs); r = dss_sdi_enable(); if (r) diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c index 08ec1a7103f2..3c39aa8de928 100644 --- a/drivers/video/omap2/omapfb/omapfb-main.c +++ b/drivers/video/omap2/omapfb/omapfb-main.c @@ -31,6 +31,7 @@ #include <linux/omapfb.h> #include <video/omapdss.h> +#include <plat/cpu.h> #include <plat/vram.h> #include <plat/vrfb.h> @@ -1192,7 +1193,7 @@ static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green, break; if (regno < 16) { - u16 pal; + u32 pal; pal = ((red >> (16 - var->red.length)) << var->red.offset) | ((green >> (16 - var->green.length)) << diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c index 4b0fcf3c2d03..fee195a76941 100644 --- a/drivers/w1/masters/omap_hdq.c +++ b/drivers/w1/masters/omap_hdq.c @@ -19,7 +19,6 @@ #include <linux/pm_runtime.h> #include <asm/irq.h> -#include <mach/hardware.h> #include "../w1.h" #include "../w1_int.h" @@ -644,7 +643,7 @@ static int omap_hdq_remove(struct platform_device *pdev) /* remove module dependency */ pm_runtime_disable(&pdev->dev); - free_irq(INT_24XX_HDQ_IRQ, hdq_data); + free_irq(platform_get_irq(pdev, 0), hdq_data); platform_set_drvdata(pdev, NULL); iounmap(hdq_data->hdq_base); kfree(hdq_data); diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index fceec4f4eb7e..f5db18dbc0f9 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -46,6 +46,7 @@ #include <linux/slab.h> #include <linux/pm_runtime.h> #include <mach/hardware.h> +#include <plat/cpu.h> #include <plat/prcm.h> #include "omap_wdt.h" @@ -218,12 +219,16 @@ static long omap_wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETSTATUS: return put_user(0, (int __user *)arg); case WDIOC_GETBOOTSTATUS: +#ifdef CONFIG_ARCH_OMAP1 if (cpu_is_omap16xx()) return put_user(__raw_readw(ARM_SYSST), (int __user *)arg); +#endif +#ifdef CONFIG_ARCH_OMAP2PLUS if (cpu_is_omap24xx()) return put_user(omap_prcm_get_reset_sources(), (int __user *)arg); +#endif return put_user(0, (int __user *)arg); case WDIOC_KEEPALIVE: spin_lock(&wdt_lock); diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index 1afb4fba11b4..4d519488d304 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -232,7 +232,7 @@ xen_swiotlb_alloc_coherent(struct device *hwdev, size_t size, return ret; if (hwdev && hwdev->coherent_dma_mask) - dma_mask = hwdev->coherent_dma_mask; + dma_mask = dma_alloc_coherent_mask(hwdev, flags); phys = virt_to_phys(ret); dev_addr = xen_phys_to_bus(phys); diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c index 097e536e8672..03342728bf23 100644 --- a/drivers/xen/xen-pciback/pci_stub.c +++ b/drivers/xen/xen-pciback/pci_stub.c @@ -353,16 +353,16 @@ static int __devinit pcistub_init_device(struct pci_dev *dev) if (err) goto config_release; - dev_dbg(&dev->dev, "reseting (FLR, D3, etc) the device\n"); - __pci_reset_function_locked(dev); - /* We need the device active to save the state. */ dev_dbg(&dev->dev, "save state of device\n"); pci_save_state(dev); dev_data->pci_saved_state = pci_store_saved_state(dev); if (!dev_data->pci_saved_state) dev_err(&dev->dev, "Could not store PCI conf saved state!\n"); - + else { + dev_dbg(&dev->dev, "reseting (FLR, D3, etc) the device\n"); + __pci_reset_function_locked(dev); + } /* Now disable the device (this also ensures some private device * data is setup before we export) */ diff --git a/firmware/Makefile b/firmware/Makefile index 344713b11669..fdc9ff045ef8 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -40,7 +40,6 @@ fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-6.2.1a.fw \ bnx2/bnx2-mips-06-6.2.1.fw \ bnx2/bnx2-rv2p-06-6.0.15.fw fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin -fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \ cxgb3/t3c_psram-1.1.0.bin \ cxgb3/t3fw-7.10.0.bin \ diff --git a/firmware/intelliport2.bin.ihex b/firmware/intelliport2.bin.ihex deleted file mode 100644 index e9cfe8cb2b21..000000000000 --- a/firmware/intelliport2.bin.ihex +++ /dev/null @@ -1,2147 +0,0 @@ -:100000003C4237180201030000000000000000001D -:10001000576564204465632030312031323A3234F0 -:100020003A33302031393939000000000000000037 -:10003000E96C0F426547694E6E496E47206F462056 -:10004000634F6445CC135A15E8167618041A921BB0 -:10005000201DAE1E3C20CA215823E6247426022807 -:1000600090291E2BAC2C3A2EC82F5631E432723414 -:1000700000368E371C39AA3A383CC63D543FE24020 -:100080007042FE438C451A47A848364AC44B524D2D -:10009000E04E6E50FC518A531855A6563458C2593A -:1000A000505BDE5C6C5EFA5F88611663A464326646 -:1000B000C0674E69DC6A6A6CF86D866F1471A27253 -:1000C0003074BE754C776C778C77AC7733DB8ADC19 -:1000D0005333DB250700750A8A1E080183E30CEB06 -:1000E00020903C01750A8A1E080180E3C0EB129043 -:1000F0008A1E0D013C02750680E30CEB049080E340 -:10010000C053508B1EBA138EDBE86A65558BEC53D7 -:100110001E2BC08ED88B5E04C1E304035E06D1E3C0 -:100120002E8B9F44008D472A1E5A1F5B5DC3558B43 -:10013000EC531E2BC08ED88B5E04C1E304035E0615 -:10014000D1E32E8B9F44008D47341E5A1F5B5DC345 -:10015000FB558BEC53515256571E061E0733C08E6B -:10016000D88B5E04268A47592503008BF0D1E62EF2 -:100170008BB4C400C1E0042602471AD1E08BE82EFC -:100180008BAE4400892C268A471C88440F268A4758 -:100190001D884410268A471E884411268A471F88D6 -:1001A0004412268A4720884413268A472388441409 -:1001B000268A4724884415268A475A88440E33C025 -:1001C00089440689440888440B88440AB021B464F1 -:1001D000894404894402B05588440D88440CE86A77 -:1001E00000725BE8C900E8C110894408807C0F01F7 -:1001F0007429E82B02E87F02807C0F03741DE8A9B4 -:10020000108BF82B44083DA00F7210897C0833C076 -:1002100087440685C07504C6440AFF8A440A84C020 -:10022000750BB80800E86A4AE8A90173BFE84F01F6 -:100230008166487FFF83667ABFB002E8040E8A4475 -:100240000A98071F5F5E5A595B5DC3814E48800064 -:10025000B040E83D4AE88940732AE84D108BD8B099 -:1002600005E82E4AF6462702751AE83D102BC33DD5 -:10027000581B72EB8166487FFFB002E8C40DC6448C -:100280000A01F9C3834E7A40F8C3FBB001E8024A81 -:10029000FAE8991EE40A84C075F0B04EE60AFBB095 -:1002A00001E8EE49FAE8851EE40A84C075F0C3FA55 -:1002B000E87A1EE4EC884416E4E4884417E4F888FD -:1002C0004418E4F0884419E41088441AE41288447D -:1002D0001BE41488441CE43488441DE43688441E1E -:1002E000E4D824018AE0E4DA24020AC488441F8A9C -:1002F0004410E8CD1F8A4411E835218A4412E88968 -:10030000218A4413E84321C686A10000E414241086 -:10031000E614E412243DE6128A44153C01721E776D -:1003200016B011E634B013E636E4140C10E614E40B -:10033000120C40E612EB06E4120C02E6128A440F9D -:100340003C0174063C02740AEB0EE4120C08E6123F -:10035000EB06E4120C10E612E82FFF8A44143C026C -:100360007508B05588440C88440DB021B4648944A4 -:1003700004894402E40C0C10E60CE8ED39FBC3E8F8 -:100380005F3F7308FBB00AE80849EBF3FAE89D1DEC -:100390008A64168A441789869400E6E48AC4E6ECE7 -:1003A0008A64188A441989869600E6F08AC4E6F8B9 -:1003B0008A441AE6108A441BE6128A441CE6148A10 -:1003C000441DE6348A441EE6368A441FE6D8E6DA3F -:1003D000E9B7FE90FA8A440EE6FEE402A80175052C -:1003E00033C0FBF8C333C0E400FBF9C38A64148054 -:1003F000FC02742BFEC0FEC780FF4E721C74098085 -:10040000FF507308B00AEB17B00DEB1302DC32FF9C -:1004100080FB7F7C02B3218AC33C7F7C02B021C376 -:10042000FA807C0B047602FBC38B46243D080072E5 -:10043000F68E46028B7E228A440C8B5C02AAE8ABC5 -:10044000FFAAE8A7FFAAE8A3FFAAE89FFF88440C39 -:10045000895C0280440B04897E22836E24048346D7 -:100460001A04807E26027406806626FDFBC360B0F7 -:10047000FDE8023F61FBC3FA807C0F037509C644A7 -:100480000B00E8E538FBC3C47E148B4E3A85C97572 -:1004900035268B0D4747E3EA3B7E047622B80200FF -:1004A00039462E7707C7462E0000EB138B5E2C894A -:1004B0005E0426C70700004343895E2C29462E852B -:1004C000C978CE894E3A8A440D8B5C04268A25472A -:1004D0003AC47516FE4C0BFF4406E80FFFE2ED88A8 -:1004E000440D895C04894E3AEBA7C6440AFEE879BC -:1004F00038FBC390E8B30D8AE88A0ECB13B3078AA2 -:10050000C1EEEB00EC3AC1750902CDFECB75F0EB04 -:100510000C90880ECB138AE8BBFFFFF9C3880ECB83 -:1005200013F8C390BB3F3F8A8E9E00BAFE00EC8A50 -:10053000E832C122C37502F8C3F9C390E8E5FF733E -:1005400001C3BAD000BB03038A8E9F00EC8AE83255 -:10055000C122C37502F8C3F9C39033C08ED88EC0D0 -:10056000803EC813007507B00AE82647EBF2FB335C -:10057000DB8A1EC913434383FB7E760733DBB0025D -:10058000E80F472E8BAF4400837E080074E7881E77 -:10059000C913B002E8FB46FAF7463840007414E885 -:1005A000961BE87FFF721C33D28A969F0083C20E8F -:1005B000EB0C90E8771BE883FF7208BA4800E83339 -:1005C000FF73AB23CB898E9A0089969C00FE86B57B -:1005D00000C606C81300B00AE8670AFBEB891018CA -:1005E000082833C0A005018AC824407524C7067CAA -:1005F000128E45C70642120100C606541202B00808 -:10060000F6C1017402B004A34612A24C12A29412C5 -:10061000C3C7067C12B645A00F0184C0750E6A00E0 -:100620001FC60693121E9C0EE8B10C90C70644121A -:100630000100A342128BD8C1E304881E9412BEE2CB -:10064000052BF08BC833DB8BFB2EAC888548128AD8 -:10065000D80C05E6FE8AE0EB00E4FE32C4A83F7445 -:1006600003E99E00E400888550128AE02430BA1025 -:10067000FF3C30741280FC04740ABA0403F60608C6 -:1006800001FE7403BA080F88954C1202FA32C0F6C4 -:10069000C4087402B001888558128AC43C35745B62 -:1006A0003C3674573C3474533C04744F3C14744BC4 -:1006B0003C157447A8407425C685541204D1E7B48C -:1006C000038AC389855C128AC38AE380CC01898549 -:1006D0006412D1EF47E203EB1A90E96CFFC6855430 -:1006E0001202D1E78AE68AC30C0489855C12D1EF35 -:1006F00047E2E733C08AC7A34612C3C68554120631 -:10070000EBBBC68554120033C08885501288854CD7 -:100710001288855812EBA6C7462602128B461E8900 -:1007200046008946228B4620894624C7461A000087 -:10073000C3C7463C8000C7463801001E568B763042 -:100740008976048976148E5E0633C089044646890C -:10075000762C89463A8B4632484889462E5E1FC31E -:1007600033C089464889464AC74646AE0189464E47 -:100770008B46448946508B4642894640894608C389 -:1007800033C0894676894678C7467A1000561E8B54 -:10079000767089761089760C8E5E12C70400008B05 -:1007A00046728946741F5EC3895618895602895657 -:1007B0000689560A89560E8956128956168BD84BC9 -:1007C0004BC1E302BF0200897E1E03FB897E30031A -:1007D000FB897E4203FB897E7083EB08895E20895A -:1007E0005E32895E44895E7250E82BFFE871FFE853 -:1007F0003FFFE88BFF58C3B83075C1E8040E5B03B8 -:10080000C3A3BA13833E4212007407803E941200C1 -:10081000750E6A001FC60693121E9C0EE8BD0A9054 -:10082000B8307AC1E80440A3C0132B061201F7D8F0 -:1008300033D28BCA8A0E9412F7F13D8000770E6A8C -:10084000001FC6069312259C0EE8900A90483DFFB3 -:10085000077203B8FF07A3C21333C98A0E94123379 -:10086000F6B800092E8BAC440089464C404646E25F -:10087000F38A0E941233F68B16C013A1C2132E8B7B -:10088000AC4400E822FF03D04646E2F2C333C02E58 -:100890008BAD44008946084747E2F4C35133C00A90 -:1008A000C22E8BAD440089869E00814E38002047C1 -:1008B00047FEC480FC04720432E4FEC0E2E35983C4 -:1008C000E9107405F7D9E8C4FFC35133C00AC22E3A -:1008D0008BAD440089869E00834E3840474780C4D4 -:1008E00010790432E4FEC0E2E65983E9107405F79A -:1008F000D9E899FFC3E8D2FFC38D089C08CA08F560 -:10090000088B0E421233F6515633DB8BCB8A944858 -:10091000128A8C4C128A9C54128BFEC1E70585DB2F -:100920007502B1102EFF97F9085E5946E2D9C3014E -:10093000CC03D000E802D000E801D000E800D000ED -:10094000E804D0A8DA00DC00DE01D803CC03CC0335 -:10095000CC04D0A8DA20DC00DE03CC03CC03CC002E -:10096000D803CC03CC03CC03CC03CC03CC03CC0303 -:10097000CC03CC03CC03CC03CC03CC03CC03CC03FF -:10098000CC04D000DA20DC03DE01D803CC03CC0396 -:10099000CC03CC00D800CC00D0000056521E0E1F55 -:1009A000BE2F0933D2FCAD85C0740D8AD4EEAD855F -:1009B000C074058AD4EEEBEE1F5A5EC3E48084C097 -:1009C00074167814B027E6FCB011E634E4FC3C273A -:1009D0007506E4117502F8C3F9C383C206B0BFEE11 -:1009E00083EA02B010EE8886AF00B01183C204EE35 -:1009F00083C202EEB01383C202EE83C202EE2EA1C6 -:100A00004C2D8986940083EA0EEE83C2028AC4EEDE -:100A100083C204B003EE8886A80083EA0432C0EEE5 -:100A200083C202B089EE8886A6000C06EEB040B400 -:100A30003889461CC74636380083C20432C0EE8867 -:100A400086A700C383C206B0BFEE83EA02EC3A86F3 -:100A5000AF00752483C204EC3C11751C83C206EC04 -:100A60003C13751483EA088A86A800EE83EA02EC38 -:100A700024C03CC07502F8C3F9C333C98BD18BF1D4 -:100A80008A0E9412C1E9022E8BAC4400F74638005E -:100A900020740E8A869E00E6FE32C0E68042E8FAA6 -:100AA000FE83C608E2E185D27403E80508C333C9B2 -:100AB0008BF18A0E94122E8BAC4400F7463840001E -:100AC0007406E87316E812FF4646E2EAC333C98BA0 -:100AD000F18A0E9412C1E9022E8BAC4400F746381D -:100AE00000207416E84616E8D2FE730E6A001FC690 -:100AF0000693121C9C0EE8E3079083C608E2D9C354 -:100B000033C98BF18A0E94122E8BAC4400F7463811 -:100B100040007416E82116E82AFF730E6A001FC60B -:100B20000693121C9C0EE8B307904646E2DAC30C0B -:100B300000001000131200001400283C001B3E00AF -:100B4000002A00002C0000420014D80000DA000047 -:100B50003400113600133800113A001300005650CB -:100B600052BE2F0B2EAD85C07406922EACEEEBF468 -:100B70005A585EC3532EA16022E6E4E6F08AC4E62A -:100B8000ECE6F8E8D8FFB04BE610B050E612B0380B -:100B9000E614E8AE15B046E60AE8A715B01AE60A6C -:100BA000E8A015B022E60AE89915E8FD068BD8E41E -:100BB00016A8047518E8F2062BC33D320072F06ADD -:100BC000001FC6069312239C0EE8100790E8DA0671 -:100BD0002BC33D2400771BB031E6FC565155B910AC -:100BE000002E8BAC4400814E3880004646E2F25D18 -:100BF000595EE869FFE84B15B046E60AE844155B24 -:100C0000C333F68B0E42122E8BAC4400F7463800ED -:100C1000207406E81715E85BFF83C620E2E9C38B62 -:100C2000C20504008946282EA14C2D89868E008994 -:100C300086900089869200C686A3000AC686C300F5 -:100C4000035283C2048A86A6000C06EE5A83C202AF -:100C5000B005EE8886A500C3E803FFE8E514B042BE -:100C6000E60AF74638800074062EA19C22EB042E7B -:100C7000A16C22C7461C0C008986940089869600C8 -:100C800089868E008986900089869200E6F0E6E4E7 -:100C90008AC4E6F8E6ECC686C30003E8A514B01AD9 -:100CA000E60AB0108886A500E60CC333C98BF18A2A -:100CB0000E94122E8BAC4400F7463840007406E8C0 -:100CC0007614E85AFF4646E2EAC333C98BF18A0E2E -:100CD00094122E8BAC4400F7463800207406E84C82 -:100CE00014E874FF4646E2EAC390833E441200755E -:100CF00014B001BA0601EE2AC0EEB002EEB004EE66 -:100D0000B80002EB0FBA0601B040EEB801008A0E3F -:100D10000E01D3E0A38812C3A18812A384122D2050 -:100D200000A38A122D2000A38212C706861220007B -:100D3000C70680123200C3833E44120074768B0EC5 -:100D4000421233F68AA4541284E4745F8A844812EF -:100D50000C04E6FEF6C4047425B01BBA0000EEEBEA -:100D6000002AC0BA0200EEEB00B003EEEB0032C086 -:100D7000BA0200EEEB00BA0000B000EEEB2DB01F9F -:100D8000BA0000EEEB002AC0BA0200EEEB00B0039E -:100D9000EEEB00D1E68A845D12D1EEF6D0BA020005 -:100DA000EEEB00BA0000B00AEEEB00E404EB00E466 -:100DB0000446E290C390B81400BA3EFFEFB80600B4 -:100DC000BA32FFEFB80F00BA34FFEFBA36FFEF8345 -:100DD0003E4412007516B81100BA38FFEFB8120081 -:100DE000BA3AFFEFB81B00BA3CFFEFC3B81100BA24 -:100DF00038FFEFB81200BA3AFFEFB81B00BA3CFF59 -:100E0000EFC3B8FC00BA28FFEFFB833E4412007426 -:100E100007B8CC00BA28FFEFC300FFFF202428FF4B -:100E20002CFFFF303438FFFF3C903C0F770EBB198E -:100E30000E2ED73CFF74058AD8F8C3902ADBF9C37D -:100E4000833E4412007427A00601802606013080EC -:100E50003E0601307518B90200BFC413BA0601EC92 -:100E6000A82075F8BA0401EDABE2F1EB1690B904D5 -:100E700000BFC413BA0601ECA82075F8BA0401EC4F -:100E8000AAE2F1FA90BEC413AD80E43F80FC027484 -:100E90000E6A001FC60693120A9C0EE83E0490AD2F -:100EA0003C0F75ED8AC4E881FF72E6881E1A01C600 -:100EB000068E1200B0000A061A01BA0001EEC6063C -:100EC0008F1240833E4412007506B80C00EB04906C -:100ED000B84C00BA28FFEFC3833E4412007501C32B -:100EE000A150120B0652120AC4A80874F2A00F01F6 -:100EF0002AE450FF36BA131FE8505683C4026A0032 -:100F00001F33C0A3BC13A00F01A3BE138B1EBC13C1 -:100F10008A875012F687501208740D24078AE0BEA3 -:100F2000CC00A0BC13E8943DFF06BC13FF0EBE131B -:100F300075DAC3901E33C08ED8B001E8543D1FC38C -:100F400033C98BF18A0E94122E8BAC4400C74662D3 -:100F50003844C7467CFC3BC7467EE23BC7868000E0 -:100F6000EC3CE8AB16C686C00011837E080074070F -:100F70005156E833335E594646E2CDC333C98BF14F -:100F80008BF98A0E9412C1E902E3132E8BAC440054 -:100F90008A869E0088856C1283C60847E2EDC3FAF4 -:100FA000FCB0C0BA0001EE33C08ED88EC08ED0BF68 -:100FB0001601B9CC772BCFD1E9F3ABBC4012E8D9FD -:100FC00002E8703CBECC0FE8F23CF49033C08ED8FF -:100FD0008EC08ED0F6060A0180740BBE3555E8DB54 -:100FE0003CB001E8AC3CE8B300E8F6F5E808F8E806 -:100FF0000FF9E885FAE8B6FAE8EFFCE8C210E80372 -:101000003CE8B2FDE830FDE85402C6068F12C0E8A5 -:10101000BBFAE8EBFAE8E9FBE8AFFCE88DFCE81F77 -:10102000FFE858FFE8DBFDE816FE33C0BE5A05E8CE -:101030008A3CE8A3FEE8E0FCFBBEA444E87D3CE972 -:10104000CA2D56988BF08B425285C07527C74252E5 -:10105000010053368B9C2C01F6C301750C36896850 -:10106000523689AC2C015B5EC33689AC2C013689C3 -:10107000AC1C015B5EC356988BF033ED368B841C41 -:1010800001A80175158BE833C08742523689841C4C -:1010900001A80174053689842C015EC3565133F6CC -:1010A000B80100B9080089841C0189842C014646D6 -:1010B000E2F4595EC390BB01008BE8FF4E6E740AE8 -:1010C0008BDD8B4658A80174F0C38B4648A90800F5 -:1010D0007445F7463840007427E85C1080C2068AE1 -:1010E00086A80024BF8886A800EE60B0FEE886329D -:1010F00061B002E84CFF8B464824F7894648EB175D -:10110000E82A10814E2600408A86A5000C028886B7 -:10111000A500E60C8B4648A904007414B002E8212F -:10112000FF8B464824FB89464860B0DFE8473261C0 -:1011300033C0874658F6C301750B36894758A80156 -:10114000750DE974FFA32201A8017503E96AFF89FF -:101150001E3201C3BB01008BE8F74638400074150E -:10116000E8D50F80C20AECA840750A8BDD8B465685 -:10117000A80174E3C38B462680E4FE80CC02894636 -:1011800026B002E8BCFE33C0874656F6C301750A96 -:1011900036894756A801750BEBBDA32001A8017540 -:1011A00002EBB4891E3001C3601E062BC08ED8A08E -:1011B000901284C07549A12201A8017503E8F6FECA -:1011C000A12001A8017503E88AFFA1AC13487805A6 -:1011D0007445A3AC13A1AE134878057451A3AE13A4 -:1011E000A1B0134878057463A3B013A17E124078B0 -:1011F00003A37E12B80080BA22FFEF071F61CFA0C1 -:101200009112403C02720B33C0A29112FF167C1265 -:10121000EBA4A29112EB9FA08E1232068F12A28E27 -:10122000120A061A01BA0001EEB82C01EBA4833EA3 -:101230008412107211BA28FFED0C81EFE85337BA0F -:1012400028FFED247EEFB80400EB92C6068D120154 -:10125000E83F37C6068D1200A1B213EB8B908A1EB1 -:101260000B012AFF6BC319BA62FFEFB80A00BA601C -:10127000FFEFB801E0BA66FFEFB8FFFFBA52FFEF29 -:10128000B809C0BA56FFEFC706AC132C01C706AEAB -:10129000130400C606911200C3908A1E0B012AFF98 -:1012A0006BC305D1E8A31801C39052BA50FFED5AA1 -:1012B000C39053518B1E1801B9320590E2FE4B7555 -:1012C000F7595BC3B080BA00010A061A01EEC39059 -:1012D000B040EBF2B0C0EBEEB000EBEAFA60061EF5 -:1012E000162BDB8EDB2EA1BA4C2EA3924CA09312B0 -:1012F000988BE889262D7A803ECA13007403E96B27 -:1013000042E8C0FFE8ABFFE8A8FFB020C606901295 -:1013100000FF167C128BFD83FF0A7211E8B9FFE80B -:1013200090FFE8ABFFE88AFF83EF0AEBEA0BFF745C -:101330000FE8A4FFE87BFFE89AFFE875FF4F75F11F -:10134000E895FFE86CFFEBB98A86A50024FDEE88DE -:1013500086A500C38A86A6000C02EEC38B7638F7FA -:10136000C6010074EF8B4E368B462E3BC173028B49 -:10137000C82BC189462E014E34C47E0426010D8B34 -:101380007E2C83EA04F36C8EC1897E2C3B463C7232 -:1013900012F7C62000750B83CE20897638B000E89E -:1013A000A0FCC3F7C60400741B8BD883CE108976CB -:1013B000388A86A70024FE8886A70083C208EE83A9 -:1013C000EA088BC33D40007201C3814E380004839C -:1013D000C2028A86A50024FA8886A500EEC38A8602 -:1013E000A6000C02EEC3F74638010074F18B4E2EB6 -:1013F00032DB8ABEA30083C206C476048B7E2C83B4 -:10140000F908722CECA80174168AE083EA0AEC83CE -:10141000C20A84E77551AAFEC34983F90873E5320D -:10142000FF26011C015E34897604894E2E897E2CAC -:101430003B4E3C7211F64638207401C3834E38206F -:10144000B000E8FDFBC3F64638047415834E38102F -:101450008A86A70024FE8886A70083EA02EE83C25C -:10146000023D4000725DC332FF26031C85DB740918 -:1014700026891C8BF74747494980E41E80CCC0264B -:101480008904F6C41074278B7638F7C60010740BE5 -:1014900050FE86B200B00AE8A8FB58F7C6000174F7 -:1014A0000DE882268B76388B4E2E8B7E04AB8BF725 -:1014B00033C0AB32DB8ABEA300494983F9087217F7 -:1014C000E941FF814E38000483C2F88A86A50024D2 -:1014D000FA8886A500EEC3E945FF83C208EC88863A -:1014E000AA00C0E8048AE08AC88686A90032E08B98 -:1014F0005E3E84E3744F8AC18B4E26F6C504740C9D -:10150000A808740580E1BFEB0380C940F6C50874E4 -:101510000CA802740580E17FEB0380C980884E2609 -:101520008BF08A86A50084C97408A802741524FD6E -:10153000EB06A802750D0C028886A50083EA0AEE68 -:1015400083C20A8BC684E77501C3C686BA0001B0A0 -:101550000EE8EEFAF74638000274EE837E2E06722D -:10156000E88AA6AA00C45E048B7E2CB0FFAAB00253 -:10157000AB26830703836E2E03897E2CF646382024 -:101580007401C3834E3820B000E8B6FAC39083EAF2 -:1015900008E9B4FD83C2068B5E26F6C3C075EF8BE7 -:1015A0004E1CEC8886A40083EA0AA82075028ACD26 -:1015B00032ED8B461A3BC87318014E2A2BC189465F -:1015C0001AC57600F36E8ED98976003D2000723000 -:1015D000C385C074318BC801462AC57600F36E8E70 -:1015E000D980CB02895E26E832F1F6C701751683F1 -:1015F000C202E853FDF6C710750BB002E843FAC308 -:10160000F6C70174F0C380CB02895E26F6C7017469 -:10161000DE83C202E831FDF686A40040740B80E749 -:10162000FE80CF02895E26EBCCB004E814FAC3C07A -:10163000C2C8CAC4C6CCCED0D2D8DAD4D6DCDE90EA -:10164000E90E01E4C48AE0E4C48BD083F90872F0A7 -:1016500026833F0074048BDF49498BFB8ADE83E3DA -:101660000F2E8AA72F16ABF6C4107424F7C60010ED -:10167000740B50FE86B200B00AE8C6F958F7C600EF -:1016800001740DE8A0248B76388B4E2E8B7E04AB34 -:10169000897E0433C0AB4949894E2E897E2C8BC18B -:1016A000EB4E90EB9E90E4D684C07963E6D08AC876 -:1016B00025030003D8D1E32E8BAF4400888EAE0003 -:1016C0008B4E2EC45E048B7E2C8B7638E4862407EA -:1016D0003C0375CFE41C913BC173028BC82BC189BD -:1016E000462E014E3426010FBAC400F36C897E2CBD -:1016F0003B463C721CF7C62000750B83CE208976D2 -:1017000038B000E83CF98A86AE00243FE6D6C3F93B -:10171000C3F7C60A007435F7C61000752F83CE10C4 -:10172000897638F7C60200740E50E4D824FEE6D855 -:1017300058F7C6080074155051B9E803E40A84C08C -:10174000E0FA84C07504B024E60A59583D4000739D -:10175000B58A86A50024EF8886A500E60C81CE1008 -:1017600004897638EBA00008040C0109050D020A73 -:10177000060E030B070F004080C02060A0E0105051 -:1017800090D03070B0F0E4D2E6D08AC825030003D0 -:10179000D8D1E32E8BAF4400888EAE00E4D8C0E8E9 -:1017A000048BD82E8A8766178AE08AC88686A900A5 -:1017B00032E0E4988B5E3E84E374548AC18B4E26FB -:1017C000F6C504740CA808740580E1BFEB0380C95A -:1017D00040F6C508740CA802740580E17FEB038015 -:1017E000C980884E268BF08A86A500F6C1FD740854 -:1017F000A806741924F9EB0FA8067511F6C5017532 -:10180000040C04EB020C028886A500E60C8BC6844F -:10181000E775098A86AE00243FE6D2C3C686BA00C1 -:1018200001B00EE81CF8F74638000274E6837E2EFD -:101830000672E08A86A9008AE08686AA008AC832F3 -:10184000C480C90B22C1C0E4040AE0C45E048B7EDC -:101850002CB0FFAAB002AB26830703836E2E038948 -:101860007E2CF646382075AB834E3820B000E8D188 -:10187000F7EBA090E41224DFE61281E3FE9F895E7D -:1018800026836648F7EB7390F6C72075E7E4120CE1 -:1018900020E61232C0E6C6B083E6C680CF20895E5D -:1018A000268A86A5000C028886A500E60CEB7490BB -:1018B000F6C74075D3E4120C20E61232C0E6C6B07B -:1018C00081E6C680E7DF80CB01895E26B006E8713D -:1018D000F7908A86A50024F9E60C8886A500EB43DC -:1018E000E4D4E6D08BF825030003D8D1E32E8BAFE8 -:1018F00044008B5E26F6C76075B6F6C3C075D3BAD2 -:10190000C6008B4E1C8B461A3BC8731E014E2A2BF9 -:10191000C189461AC57600F36E8ED98976003D20BE -:1019200000723D8BC7243FE6D4C385C074398BC891 -:1019300001462AC57600F36E8ED983CB02895E26D6 -:10194000E8D9EDF6C70175398A86A50024F9E60CB9 -:101950008886A500F6C71075CAB002E8E4F6EBC3A6 -:10196000F6C70174EFEBBCF6C70174DC8A86A500EC -:10197000A802741181E3FFFE81CB0002895E26EB91 -:10198000C78A86A50024FB0C02E60C8886A500EB1E -:101990009290FDF7DF7FFEFBEFBF0004000405041B -:1019A00005040104000405040504060406040504F6 -:1019B00005040604060405040504020400040504E5 -:1019C00005040104000405040504060406040504D6 -:1019D00005040604060405040504070407040504B9 -:1019E00005040704070405040504060406040504A9 -:1019F0000504060406040504050407040704050499 -:101A00000504070407040504050406040604050488 -:101A10000504060406040504050403040004050483 -:101A20000504010400040504050406040604050475 -:101A30000504060406040504050402040004050464 -:101A40000504010400040504050406040604050455 -:101A50000504060406040504050407040704050438 -:101A60000504070407040504050406040604050428 -:101A70000504060406040504050407040704050418 -:101A80000504070407040504050406040604050408 -:101A90000504060406040504050433DB8AD88A8796 -:101AA0006C12E6FEC1E302E4CEA8047509A8027434 -:101AB00003E92CFEF9C35053E8CBFC5B58A8027431 -:101AC00003E91CFEF8C333DB8AD88A876C12E6FE72 -:101AD000C1E302E9D0FB9A1AC61A00000200040012 -:101AE00002000600020004000200080002000400D8 -:101AF000020006000200040002000A0002000400C6 -:101B000002000600020004000200080002000400B7 -:101B1000020006000200040002000C0002000400A3 -:101B20000200060002000400020008000200040097 -:101B3000020006000200040002000A000200040085 -:101B40000200060002000400020008000200040077 -:101B5000020006000200040002000E000200040061 -:101B60000200060002000400020008000200040057 -:101B7000020006000200040002000A000200040045 -:101B80000200060002000400020008000200040037 -:101B9000020006000200040002000C000200040023 -:101BA0000200060002000400020008000200040017 -:101BB000020006000200040002000A000200040005 -:101BC00002000600020004000200080002000400F7 -:101BD00002000600020004000200C390DA1494150B -:101BE0005C13E613DA1BDA1BE613DA1B8B94641220 -:101BF000C1E604A80174355033C08AC2E6FEE4A0F1 -:101C000085C074278BD82E8A9FDA1A52562E8BA83D -:101C100044008B5628ECA801750D8886AD00240E73 -:101C20008AD82EFF97DC1B5E5AEBCD58A80274367B -:101C300083C61033C08AC6E6FEE4A085C074278B35 -:101C4000D82E8A9FDA1A52562E8BA844008B56281B -:101C5000ECA801750D8886AD00240E8AD82EFF975A -:101C6000DC1B5E5AEBCDC39032E48BD88BD02E8A2E -:101C70009F9A192E2297921956528AC3240303C69B -:101C800080E304D0EB2EFF97D61A585EA955007555 -:101C9000D9C3601E062BC08ED8A15C12E6FEE400FC -:101CA00022C4740833F6E8BFFFEBEE90E40407E4C7 -:101CB000041FB80080BA22FFEF61CF90601E062B90 -:101CC000C08ED8A15E12E6FEE40022C47408BE04F1 -:101CD00000E894FFEBEDE40407E4041FB80080BAC9 -:101CE00022FFEF61CF90601E062BC08ED8A15C1240 -:101CF000E6FEE40022C4741833F6E86BFFA160121C -:101D0000E6FEE40022C474E5BE0800E85AFFEBDDFD -:101D1000A16012E6FEE40022C475EDE40407E404C9 -:101D2000A15C12E6FEE4041FE404B80080BA22FFBE -:101D3000EF61CF90601E062BC08ED8A15E12E6FE2A -:101D4000E40022C47419BE0400E81CFFA16212E67C -:101D5000FEE40022C474E4BE0C00E80BFFEBDCA13F -:101D60006212E6FEE40022C475EDE40407E404A177 -:101D70005E12E6FEE4041FE404B80080BA22FFEF1E -:101D800061CF601E062BC08ED8A15C12E6FEE480F7 -:101D900084C4740833F6E853FEEBEE90B80080BAC2 -:101DA00022FFEF071F61CF90601E062BC08ED8A1C7 -:101DB0005E12E6FEE48084C47408BE0200E82CFED5 -:101DC000EBEDB80080BA22FFEF071F61CF90601ED5 -:101DD000062BC08ED8A16012E6FEE48084C474088D -:101DE000BE0400E806FEEBEDB80080BA22FFEF0764 -:101DF0001F61CF90601E062BC08ED8A16212E6FE36 -:101E0000E48084C47408BE0600E8E0FDEBEDB80091 -:101E100080BA22FFEF071F61CF90601E062BC08E95 -:101E2000D8A15C12E6FEE40022C4741833F6E83749 -:101E3000FEA16012E6FEE48084C474E5BE0400E8FE -:101E4000AAFDEBDDA16012E6FEE48084C475EDA17D -:101E50005C12E6FEE40407E4041FB80080BA22FF27 -:101E6000EF61CF90601E062BC08ED8A15E12E6FEF9 -:101E7000E40022C47419BE0400E8ECFDA16212E67D -:101E8000FEE48084C474E4BE0600E85FFDEBDCA1E0 -:101E90006212E6FEE48084C475EDA15E12E6FEE403 -:101EA0000407E4041FB80080BA22FFEF61CF601E70 -:101EB000062BC08ED8A15C12E6FEE48084C47418A0 -:101EC00033F6E827FDA16012E6FEE40022C474E5C3 -:101ED000BE0800E892FDEBDDA16012E6FEE4002200 -:101EE000C475EDE40407E4041FB80080BA22FFEFD4 -:101EF00061CF601E062BC08ED8A15E12E6FEE48084 -:101F000084C47419BE0200E8E2FCA16212E6FEE499 -:101F10000022C474E4BE0C00E84DFDEBDCA16212AB -:101F2000E6FEE40022C475EDE40407E4041FB800F3 -:101F300080BA22FFEF61CF90601E062BC08ED8A121 -:101F40005C12E6FEE48084C4741833F6E89DFCA1BC -:101F50006012E6FEE48084C474E5BE0400E88CFCF4 -:101F6000EBDDA16012E6FEE48084C475ED071FB8C6 -:101F70000080BA22FFEF61CF601E062BC08ED8A171 -:101F80005E12E6FEE48084C47419BE0200E85CFCC4 -:101F9000A16212E6FEE48084C474E4BE0600E84B4D -:101FA000FCEBDCA16212E6FEE48084C475ED071F41 -:101FB000B80080BA22FFEF61CF90601E062BC08E62 -:101FC000D8902AC0E6FEE4CEA801741433DBE8D52D -:101FD000F6EBEF90B80080BA22FFEF071F61CF90B9 -:101FE000F60605010175EDB001E6FEE4CEA8017428 -:101FF000E3BB0400E8AFF6EBC990601E062BC08E71 -:10200000D890FB90FA2AC0E6FEE4CEA802741333FF -:10201000DBE8CCF8EBECB80080BA22FFEF071F61D9 -:10202000CF90A80474F033DBE85BF7EBD590601E2B -:10203000062BC08ED890FB90FAB001E6FEE4CEA845 -:10204000027415BB0400E897F8EBEB90B80080BA77 -:1020500022FFEF071F61CF90A80474F0BB0400E8D3 -:1020600024F7EBD26A001FC6069312099C0EE86B98 -:10207000F2906A001FC6069312299C0EE85DF2904A -:10208000722072207220CE1D921CE61C1A1E722035 -:10209000821DAE1E381F7220821D72207220381FD2 -:1020A000722072207220F41DBC1C341D641E72202C -:1020B000A81DF21E781F7220A81D72207220781FA2 -:1020C000FCB940008CCBB864202BFFAB93AB93E200 -:1020D000FAC7064C00A811833E4412007520C706BB -:1020E0003C00084BC7063000BA1FC7063400FA1F71 -:1020F000F6060501017506C70638002E20C3C7067F -:102100003C00564B33DB8A1E5412C1E302021E56BA -:10211000122E8B878020A330008A1E5512C1E30245 -:10212000021E57122E8B87A020A33400C38B869EDD -:1021300000E6FE86C4E6D0C38B869E00E6FE33D260 -:102140008AD4C351B91027E40A909084C07405E280 -:10215000F659F9C359F8C384C0781E518AE88AC871 -:10216000B80100D3E0098698003AAEA00059751076 -:10217000E8A9E5834E2602F9C39889869800EBF01A -:10218000F8C384C07812518AE08AC8B80100D3E04D -:1021900059F7D021869800C3C78698000000C383F2 -:1021A000C2048A86A6000C04EE83EA04C3E893FF07 -:1021B0007204B082E60AC38B4626A8FD74118A8693 -:1021C000A500A806740824F98886A500E60CC3F6C5 -:1021D000C401740A8A86A50024FB0C02EB0CA80239 -:1021E000750F8A86A50024FD0C043A86A50075D8D3 -:1021F000C38A86A500EBCFE4D833DB8AD8C0EB04D2 -:102200002E8A9F6617889EA9008B5E2680E33FF684 -:10221000C7047407A810750380CB40F6C70874077D -:10222000A880750380CB40885E268A86A500F6C309 -:10223000FD740DA806740824F98886A500E60CC371 -:10224000F6C70174040C02EBF0F6C30275E90C0446 -:10225000EBE7C404C4048504590448044104C303DF -:10226000820341038202570241028201410182003E -:1022700041004E02AD0157012D002B002700210027 -:102280001600F404F404A3046F045B045104F40383 -:10229000A3035103A3026D025102A3015101A30044 -:1022A00051006202D9016D01380036003100290069 -:1022B0001B005157BF0200EB0F905156BF0100EBBE -:1022C00007905156BF0300903C197602B017988BC7 -:1022D000F08A82C4002AE48BF083FE187346D1E6AC -:1022E0002E8B8C5222F74638800074052E8B8C8200 -:1022F00022F7C7020074123B8E9400740C898E94EE -:10230000008AC5E6EC8AC1E6E4F7C7010074123B17 -:102310008E9600740C898E96008AC5E6F88AC1E60E -:10232000F05E59C377068B8E8E00EBC58B8E9000C6 -:10233000EBBFD503F6003E0010000400CA043301D1 -:102340004D00140005000103050709000102030404 -:1023500080841E00A02526000000608BF033FF2E35 -:10236000A150232E8B165223BB3223F74638800010 -:10237000740C2EA154232E8B165623BB3C23B90577 -:10238000002E3B31730A4747E2F7B8FFFFEB1D9081 -:10239000D1EF2E8A8D46232AEDD1EAD1D8E2FAF781 -:1023A000F6050200C1E8022E8AA54B232EA358236E -:1023B000612EA15823C3080020008000000260099C -:1023C0000800200080000002000800000100020058 -:1023D0000300040052565785C074053D0109760379 -:1023E000B80109BF5B01F7463880007403BFB20132 -:1023F00033F62E3B84B62376044646EBF5F7E72EFC -:102400008BBCC02303C783D200D1E7F7F72E8AA481 -:10241000CA235F5E5AC3E43E80BEC30003750CF757 -:10242000467A200074050C80E63EC3247FE63EC356 -:1024300024038886C3008AE0E41024FC0AC4E61062 -:10244000808EA10042E8CEFFC390568BF083E60752 -:10245000D1E62EFFA458249068246C2470247424A0 -:102460007824872487248724B400EB0EB4C0EB0AB9 -:10247000B440EB06B420EB02B4A0E410241F0AC45D -:10248000E610808EA100425EC3903C0277128AE083 -:10249000E41024F3C0E4020AC4E610808EA10042D6 -:1024A000C3908B5E3884C0741F3C02742083CB08B9 -:1024B0008B462E3B463C770CE888FC7207B024E63E -:1024C0000A83CB10895E38C383E3F7EBF7F7C310B9 -:1024D0000074F5E86DFC72EC8A86C000E638B02323 -:1024E000E60AEBE08B5E388B462E3B463CE4D87721 -:1024F0000B24FE80CB12E6D8895E38C30C0180CB5A -:1025000002EBF35033DBC1E804250F0F8AD82E8A83 -:102510008766178ADC2E8AA7661709463E58C3507D -:1025200033DBC1E804250F0F8AD82E8A8766178A05 -:10253000DC2E8AA76617F7D021463E58C38B463E4D -:1025400033DB8AD80ADC2E8A877617E62C8AE0E409 -:102550002A240F0AC4E62A8A86A50084E4750DA8F9 -:10256000807411247F8886A500E60CC3A8807504BA -:102570000C80EBF1C31E6033C933D233F68ED98D94 -:10258000BEFD00578B0584C074168BD1428BFE4F65 -:10259000780938A3E40074084F79F788A2E400466C -:1025A0005F83C7094183F91072D989B6860089967D -:1025B0008400611FC353C7466600008B4664A94070 -:1025C00000740DB300A980007402B37F889EC1001F -:1025D00032DBA90200740380CB40A9004074038061 -:1025E000CB02A90080740380CB01A9301E74038044 -:1025F000CBBCA90020740380CB08A904017403801C -:10260000CB10A90800740380CB20889EC2005BC356 -:102610000651575016078DBEC400B91F0033C0AA1B -:1026200040E2FC8B86920089868E00898690005855 -:102630005F5907C3E4D8C0E80453250F008BD82E98 -:102640008A8766178886A9005AC30886AC00C686A2 -:10265000BA0001B00EE8EAE9C3AD36A3B413AD3653 -:10266000A3B613AD36A3B81383E90636F706B6133F -:102670000F00C38A4626F74648800074020C108873 -:1026800086BD0032C0837E1A00750E8B5E4043808B -:10269000E3FE3B5E0875020C01837E3A00750D1E59 -:1026A000C55E148B1F1F85DB75020C02F7463810C0 -:1026B0000074020C048B5E7AF7C3020074020C08EB -:1026C000F7C3040074020C10F7C3080074020C2056 -:1026D000F7C3400074020C408886BF00C3906A00B4 -:1026E0001FC60693120D9C0EE8F1EB90B002E6DADD -:1026F000F8C333C0E6DAF8C3B001E6D8F8C333C094 -:10270000E6D8F8C3B0FFE84EFAE8A1FAF8C3AC493E -:10271000E8AFFBF8C390AC49E815FDF8C390AC49AD -:10272000E867FDF8C390AC49E81FFDF8C390AC49D9 -:10273000E634F8C3AC49E636F8C3AC493C02771F2F -:1027400084C0751DE41424EFE614E412243FE6125D -:10275000E416A8047409E8EAF97204B018E60AF865 -:10276000C38AE0E4140C10E614E4120CC0F6C401B1 -:102770007402247FE612F8C3AC49E825FDF8C39043 -:10278000B80040E87DFDE8B4FDE8A8FEB001E8B976 -:10279000FEF8C390B80040E885FDE8A0FDF8C390BE -:1027A000B80010E85DFDE894FDE888FEB008E899FF -:1027B000FEF8C390B80010E865FDE880FDF8C3900E -:1027C000B80080E83DFDE874FDE868FEB002E879F5 -:1027D000FEF8C390B80080E845FDE860FDF8C390BE -:1027E000B80020E81DFDE854FDE848FEB004E859B3 -:1027F000FEF8C390B80020E825FDE840FDF8C3903E -:10280000AC49E84814E43C24E70AC4E63CF8C39029 -:10281000B8FC3B89467CE43C0C18E63CF8C3E41267 -:102820000C02E612F8C3E41224FDEBF6E8B5FCF85E -:10283000C390836638FDF8C3AC49A8017406834E83 -:102840007A20EB0483667ADFE8CBFBF8C3908A86B4 -:10285000A5000C0224FB8886A500E60C814E26010B -:1028600020AC4932E489466E834E48084946F9C394 -:102870008A86A5000C0224FB8886A500E60C814E02 -:10288000260120ACB40AF6E4EBD8E8FA13E43C24C1 -:10289000F80AC4E63CF8C390AD4949894664A901E9 -:1028A00000741B8BD883E3FA751AA90400740FE433 -:1028B0003E0C02E63EB83844894662F8C390E43ED6 -:1028C00024FCEBEFE43E24FCE63EE8E8FCB8AA403A -:1028D000EBE6E86EF87205B018E60AF8C390AC496A -:1028E000E8CFF9F8C390AC49E8CFF9F8C390E868AD -:1028F000FD750632C0E6DAF8C3B002E6DA36A0B4F7 -:102900001324103410E8160136A1B413A901007481 -:1029100005E8FCFEEB0EA90200740432C0EB02B025 -:1029200001E8DEFE36A1B413E8B513E43C24F80A4E -:10293000C4E63C36A1B413C1E805250100E8FAFE5F -:1029400036A0B5132410E859FB32C0368A26B513D9 -:10295000F6C4047409FEC0F6C4087402FEC0E8DBC5 -:10296000FD36A1B613250F00E857F936A1B613C1FD -:10297000E804250300E8B8FA36A1B613C1E8052536 -:102980000200E805FB36A1B613F6C401750432C097 -:10299000EB0980E402D0ECB0022AC4E8ACFA36F6C7 -:1029A00006B713407405E883FEEB03E884FE36F6B1 -:1029B00006B713207405E865FEEB03E868FEF8C36C -:1029C000E4120C01E612F8C3E41224FEEBF6E41460 -:1029D00024F00C05E614E42A24F00C06E62AF8C3D9 -:1029E000E42A24F0E62AE41424F00C07E614F8C3E1 -:1029F000AD4949E864F989868E00F8C3AD4949E8D4 -:102A000058F989869000F8C3834E2604E8A8F7F8A1 -:102A1000C390836626FBE89EF7F8C390AC4984C058 -:102A2000750DE41024EFE610808EA10042F8C3E497 -:102A3000100C10EBF190AC493C02760232C0C0E0C1 -:102A400004A82074020C0824188AE0E41224E70A7F -:102A5000C4E612808EA10044F8C3AC498886C00049 -:102A6000F8C3AC49E63AF8C3AC4984C07408E41230 -:102A70000C04E612F8C3E41224FBEBF6AC49E8D6EA -:102A8000F67303E827F7F8C3E412A802740424FDE0 -:102A9000E612B8F000E887FA816626FFF3E857F7F8 -:102AA000E89AFAF8C390B88000E857FA804E2708F1 -:102AB000E844F7E887FAF8C3B88000E861FA81666D -:102AC00026FFF7E831F7E874FAF8C390B81000E889 -:102AD00031FA804E2704E81EF7E861FAF8C3B8100F -:102AE00000E83BFA816626FFFBE80BF7E84EFAF8B0 -:102AF000C39033C0AC493C017304B001EB063C0CFD -:102B00007602B00C89461CF8C390814E2600208ABC -:102B100086A5000C0224FB8886A500E60C834E26C1 -:102B200001F8C390814E2600408A86A5000C0288D9 -:102B300086A500E60CF8C390AC4950E805F658723B -:102B400008E638B023E60AF8C3F9C390AC50ADE804 -:102B500082F85AF6C201741239869600740C89867E -:102B60009600E6F086E0E6F886E0F6C202741039D8 -:102B7000869400740A89869400E6E486E0E6EC8395 -:102B8000E903C390E4168886BC00E8E6FA33DBE488 -:102B90000CA806740380CB01A810740380CB02A894 -:102BA00080740380CB04E4128AE024180AD8E4DAA3 -:102BB000F6C4027407A840750380CB20A8027509EB -:102BC000E42AA80F740380CB40F74638020074094A -:102BD000E4D8A801750380CB80889EBE00FE86B431 -:102BE00000B00AE85CE4F8C3AC493C027441771FCA -:102BF00050E84FF558720C84C0740AB012E60A808F -:102C00004E3801F8C3B011E60A806638FEF8C38B6F -:102C1000463825FFF7894638A9000475E68A86A557 -:102C200000A81075DE0C108886A500E60CF8C3819C -:102C30004E3800088A86A500A81074C724EFEBE779 -:102C4000AD49493C0172113C0C770D508AE0E41407 -:102C500025F00F0AC4E614588AC484C07402E64200 -:102C6000F8C3E8CFF9FE86B900B00EE8D4E3F8C3A4 -:102C70003A86AF00741F8886AF008AE080C206B033 -:102C8000BFEE80EA028AC4EE8A86A80080C202EE05 -:102C900080EA068AC4C38B463E85C08A86A5007436 -:102CA00012A808750D0C088886A50080C202EE8067 -:102CB000EA02C3A80874FB24F7EBEC8B462684C019 -:102CC00074168A86A500A802740D24FD8886A500C6 -:102CD00083C202EE83EA02C38A86A500A80275F7C2 -:102CE0000C02EBE85283C20CECC0E8048886A90011 -:102CF0008B5E2680E33FF6C7047407A8087503803F -:102D0000CB40F6C7087407A802750380CB80885EA5 -:102D1000268A86A50084DB7410A802740A24FD8824 -:102D200086A50083EA0AEE5AC3A80275FA0C02EBE4 -:102D3000EE90FFFF00480030BA20C41A00180012BD -:102D4000000C0006000300028001C000600030009B -:102D50001800CD0100018000100010000E000C00D2 -:102D6000080000000000060004000300020001004B -:102D70005251563C1E7747988BF08A82C40032E449 -:102D800083FE18743D83FE19743E83FE1E772FD197 -:102D9000E62E8B8C322D3B8E94007422898E94000B -:102DA00083C2068A86A8008AE00C80EE83EA068A3F -:102DB000C1EE83C2028AC5EE83C2048AC4EE5E59A4 -:102DC0005AC38B8E8E00EBCE8B8E9000EBC8525187 -:102DD0003D05007703B805008BC8BA0200B800D0E3 -:102DE000F7F1050100D1E8595AC38B467AA820743F -:102DF0000B80BEC3000375040C01EB0224FE894660 -:102E00007AC324038886C3008AA6A8008ADC80E4EB -:102E1000FC0AC43AC3740B8886A80083C206EE83FA -:102E2000EA06E8C5FFC30008183828903C04772359 -:102E300032E48BD82E8A87262E8AA6A8008ADC80C8 -:102E4000E4C70AC43AC3740B8886A80083C206EE9E -:102E500083EA06C384C07402B0048AA6A8008ADC90 -:102E600080E4FB0AC43AC3740B8886A80083C206B8 -:102E7000EE83EA06C3908B5E3884C074343C0274DF -:102E80003B8A86AF000C04E8E6FD8B462E3B463CB1 -:102E9000771BF7C30004751581CB000483C2028A37 -:102EA00086A50024FA8886A500EE83EA02895E38AA -:102EB000C38A86AF0024FBE8B6FDEBF1F7C3100030 -:102EC00074EFEBED83C20CEC83EA0CC0E804888657 -:102ED000A900C3908A86A7000C018886A7008BDA18 -:102EE00080C208EE8BD3F8C38A86A70024FEEBEAE3 -:102EF0008A86A7000C02EBE28A86A70024FDEBDAA3 -:102F0000B0FFE852F2E897F2F8C3AC49E861FEF886 -:102F1000C390AC49E8EBFEF8C390AC49E835FFF844 -:102F2000C390AC49E805FFF8C3905283C206B0BF16 -:102F3000EE5283C202AC49EE5A8A86A800EE5AF8D5 -:102F4000C3905283C206B0BFEE5283C206EBE69036 -:102F5000AC493C02770D84C0750B8A86AF0024FD16 -:102F6000E80DFDF8C3508A86AF000C02E801FD5B56 -:102F700083C2088A86A700F6C301740C24DF888602 -:102F8000A700EE83EA08F8C30C20EBF2AC49E8E5B1 -:102F9000FEF8C390B80040E869F5E8F9FCE824FFC2 -:102FA000B001E8A5F6F8C390B80040E871F5E8E58F -:102FB000FCF8C390B80010E849F5E8D9FCE804FF34 -:102FC000B008E885F6F8C390B80010E851F5E8C5F8 -:102FD000FCF8C390B80080E829F5E8B9FCE8E4FE05 -:102FE000B002E865F6F8C390B80080E831F5E8A5CE -:102FF000FCF8C390B80020E809F5E899FCE8C4FEA5 -:10300000B004E845F6F8C390B80020E811F5E8856B -:10301000FCF8C390AC49E8340CF8C390B8FC3B8989 -:10302000467CF8C38A86AF000C80E843FCF8C39066 -:103030008A86AF00247FEBF28A86AF000C40E82F2F -:10304000FCF8C3908A86AF0024BFEBF2AC49A8011C -:103050007407834E7A20EB059083667ADFE88AFD59 -:10306000F8C383C2068A86A8000C408886A800EEB2 -:1030700083EA06AC4932E489466E834E2601834ECC -:103080004808B006E8BBDF4946F9C39083C2068A08 -:1030900086A8000C408886A800EE83EA06ACB40A35 -:1030A000F6E4EBD0E8E00BF8C390AD4949894664FB -:1030B000A9010074198BD883E3FA750AA904007476 -:1030C0000DB8E23FEB0BE8ECF4B8AA40EB03B838DC -:1030D00044894662F8C38A86AF00A802740A24FDB8 -:1030E000E88DFB0C02E888FBF8C3AC49E881FCF8EA -:1030F000C390AC49E879FCF8C390E85CF57505E845 -:10310000E6FDF8C3E8CDFD36A0B41324103410E872 -:10311000260136A1B413A901007405E8FEFEEB0EEA -:10312000A90200740432C0EB02B001E8E8FE36A147 -:10313000B413E8AB0B36A1B413C1E805250100E8D0 -:103140000CFF36A0B5132410E82BFD32C0368A26BA -:10315000B513F6C4047409FEC0F6C4087402FEC0B8 -:10316000E8EFFD36A1B613250F00E803FC36A1B643 -:1031700013C1E804250300E888FC36A1B613C1E8B2 -:1031800005250200E8CDFC36A1B613F6C40175048E -:1031900032C0EB0980E402D0ECB0022AC4E88CFC17 -:1031A00036F606B713407405E88DFEEB03E894FE8F -:1031B00036F606B713207405E869FEEB03E870FEE7 -:1031C000F8C3F8C38B4638A9040075230D040089A1 -:1031D000463883C2088B462E3B463C7314834E38D8 -:1031E000108A86A70024FE8886A700EE83EA08F8E6 -:1031F000C38A86A7000C01EBEE908B4638A9040029 -:10320000740625FBFF894638F8C3AD4949E8BEFB83 -:1032100089868E00F8C3AD4949E8B2FB89869000E3 -:10322000F8C3834E2604E892FAF8C390836626FB1F -:10323000E888FAF8C390AC4984C07507808EA30073 -:1032400004F8C380A6A300FBF8C3AC4983C2083CC2 -:1032500002760232C03C017412770B8A86A70024E2 -:10326000EF8886A700EE83EA08F8C38A86A7000CD9 -:1032700010EBEE905283C206B0BFEE5283C204AC94 -:1032800049EE5A8A86A800EE5AF8C3905283C206C5 -:10329000B0BFEE5283C208EBE690AC49F8C3AC492C -:1032A000E8B4EE7303E8F7EEF8C38A86AF00247F34 -:1032B000E8BDF9B8F000E866F2816626FFF3E8237E -:1032C000FAE8D2F9F8C3B88000E837F2804E270850 -:1032D000E811FAE8C0F9F8C3B88000E841F2816665 -:1032E00026FFF7E8FEF9E8ADF9F8C390B81000E85A -:1032F00011F2804E2704E8EBF9E89AF9F8C3B81008 -:1033000000E8FFF1816626FFFBE8D8F9F8C3AC4975 -:10331000F8C383C2068A86A8000C408886A800EEFF -:1033200083EA06F8C39083C2068A86A80024BFEB0E -:10333000EA90AC498AE080C20AEC80EA0AA82074CC -:10334000058AC4EEF8C30651578B4E24E3344989ED -:103350004E24FF461A8E46028B7E228AC4AA897E9C -:10336000228B462624FD89462675298A86A500A833 -:1033700002752180C2020C028886A500EE80EA0256 -:10338000EB12C47E003B7E1E760A4F268825897E7E -:1033900000FF461A5F5907F8C390ACAD83E9038577 -:1033A000C074053D00207205B8FFFFEB03C1E003C8 -:1033B0003B8694007426898694008BD85283C2067B -:1033C0008A86A8008AE00C80EE83EA068AC3EE8330 -:1033D000C2028AC7EE83C2048AC4EE5AF8C3B08818 -:1033E0008886BC00E88CF233DB8A86A500A80274CC -:1033F0000380CB01A805740380CB02A80874038066 -:10340000CB04F686A70010740380CB108A86A9002F -:10341000F6C304750A83C20CEC83EA0CC0E8048A84 -:10342000E08A86AF00A8807408F6C401750380CBDB -:1034300020F686A70002750AF74638040074038058 -:10344000CB40889EBE00FE86B400B00AE8F3DBF8ED -:10345000C3FE86B400B00AE8E8DBF8C3AC493C021E -:103460007437771084C07406804E3801F8C38066C4 -:1034700038FEF8C38B463825FFF7894638A9000483 -:1034800075EA8A86A500A80175E20C0583C2028848 -:1034900086A500EE83EA02F8C3814E3800088A86CA -:1034A000A500A80174C624FAEBE2AD4949F8C3901F -:1034B000E811FAFE86B900B00EE886DBF8C3B0FF6B -:1034C000E8BFECF8C39083667AFBB000E873DBF8E2 -:1034D000C390AC49E853D9721136881E1A0136A040 -:1034E0008E120AC352BA0001EE5AF8C3AC4932E454 -:1034F00036A38612050600368B1E88122BD8368915 -:103500001E8A12F8C390AD8BD8AD83E90403C32B98 -:103510004676894678F7467A0200740A83667AFD11 -:10352000B80000E81CDBF8C3061607AC49250F00FD -:103530006BC0098DBEFD0003F8AC49250F00AA85BC -:10354000C074082BC8518BC8F3A459E827F0E8448D -:103550000307F8C333C0AC4936A3B21336A3B01384 -:10356000F8C383667AEFE82C03F8C390834E7A1091 -:10357000EBF4E89BF0F8C390AD3C19770E3C19775B -:103580000A8BF881E7FF0088A6C400F8C390834E39 -:103590002620AC4932E4D1E08BD8C1E30203C389D1 -:1035A000466E834E4804B006E897DA4946F9C39060 -:1035B000FE86B300B00AE889DAF8C39033C0AC499C -:1035C0006BC00A89868A00F8C390AC4932E43D0A90 -:1035D000007705B80A00EB083D5A007203B85A009C -:1035E00051F7D80564008BC88B4644F7E1B96400F5 -:1035F000F7F189464659F8C3AC49E885EBF8C39022 -:10360000AC4984C07507816638FFFDF8C3814E3828 -:103610000002F74638400075088A86A9008886AA05 -:1036200000F8C3905156E87F0C5E59F8C390FE86AF -:10363000B600B00AE80BDAF8C390FE86B700B00A0D -:10364000E8FFD9F8C390FE86B800B00AE8F3D9F8CD -:10365000C39000905155AC2EA2523633C9AD8BF9B0 -:10366000C1E705A9010074232E8BAD4400837E08B9 -:103670000074182E803E523601740960B004E8BB15 -:103680000C61EB0760B0FBE8EC0C614747D1E875D3 -:10369000D24183F90472C65D5983E905F746384083 -:1036A000007405E887EAF8C3E88DEAF8C39036C6E7 -:1036B00006C81301F8C333C0AC4936A38012AC4925 -:1036C000362B068812F7D836A38212F8C390DE266E -:1036D000DE26EC26F226F826FE2604270E271627DD -:1036E0001E2726272E273427BE34C634D2343A2745 -:1036F000782780279427A027B427C027D427E0273E -:10370000F42700281028EC34DE261E2826282C2832 -:10371000322838284E288A28063528359828BE2889 -:10372000D228DE28E628543562356C35EE28C029CB -:10373000C829CE29E02972357835F029FC298E3543 -:10374000082A122A1C2AB035362ABC355A2A622A7F -:10375000682ACA357C2AF835882AA62AB82ACC2AAB -:10376000DE2AF22A00360A2B242B2436382B4C2B47 -:10377000842B2E363A3646365436E82BAE36402C5D -:10378000622CB6367028DE26DE26D42EE82EF02EE9 -:10379000F82E002F0A2F122F1A2F222F2A2F422FF6 -:1037A000BE34C634D234502F8C2F942FA82FB42F70 -:1037B000C82FD42FE82FF42F083014301C30EC34ED -:1037C000DE2624303030383044304C306230A43083 -:1037D00006352835AA30CE30D630EA30F2305435AE -:1037E00062356C35FA30C231C231C431FA317235CA -:1037F00078350A3216328E3522322C323632B035D6 -:103800004A32BC3574328C329A32CA359E32F8351F -:10381000AA32C632D832EC32FE320E3300361233C0 -:103820002633243632339A33DE332E363A36463652 -:1038300054365C34AE36AA34B034B6368C30E32815 -:10384000F7463840007532E8E3E833C0AC493D5BE9 -:103850000077198BD8D1E32EFF97CE36720B85C92E -:1038600075E88B4648E81A0CC34E41C36A001FC670 -:103870000693120C9C0EE863DAE8BCE833C0AC494E -:103880003D5B0077E78BD8D1E32EFF97863772D95F -:1038900085C975E8C3F7467A1000750F83BE8400AA -:1038A000007408B8483A89868000C381BE8000EC65 -:1038B0003C74F783BE8800007505B8EC3CEBE7F775 -:1038C000467A080075401E608B8E88003B4E7477E8 -:1038D000333B4E78772EC47E108BDF26033D47475F -:1038E00033C08ED88DB6F4008BC1F7467A010075CF -:1038F0001DF3A4260107294678014676294674B0AF -:103900000CE83ED7611FC78688000000EBACE3E3FC -:103910005090AC247FAAE2FA58EBD8908B8E8800A6 -:10392000E3468B9E8A0085DB743EBA50FFED2B8602 -:1039300082003BC372378DB6F400C47E108BDF2645 -:10394000033D47478BC1161FF7467A01007524F3E4 -:10395000A4260107294678014676294674C7868839 -:10396000000000B00CE8DAD683667AF7C3B000E84E -:10397000D0D6C3E3DC50AC247FAAE2FA58EBD29055 -:103980001E6033C08ED88DB6FD008B8688008B9666 -:1039900084003A0475108BDE468BC88DBEF400F3AC -:1039A000A674668BF39083C6094A75E68DB6FD0052 -:1039B0008B9684003A0473108BDE468BC88DBEF460 -:1039C00000F3A674768BF39083C6094A75E68DB62C -:1039D000F400ACF7467A01007402247F1EC55E1025 -:1039E0008B37884002468937FF4E78FF4676FF4E78 -:1039F000741F8B8E880049898E8800E3438DB6F44E -:103A0000008BFE46F3A4E97DFFC576108B1C85DB99 -:103A1000740803F383C60383E6FE8B8684002BC2FF -:103A2000B48089044646C7040000897610834E7A24 -:103A300004C78688000000611FF9C333C0611FC33B -:103A4000B08084C0611FC3908B4E782B8E88007627 -:103A50002789B68C008B5E743BCB72028BCB3BC844 -:103A600072028BC88BC1E34433D28EC28BD183BE2A -:103A70008800007406E98E0033C0C38B5E10031FFC -:103A8000434352F7467A0100752AAC8DBEE4008BA1 -:103A90008E8600F2AE74348807434A75ED588B5E0B -:103AA0001001072946780146762946748BC62B8675 -:103AB0008C00C390AC8DBEE4008B8E8600F2AE7499 -:103AC0000A247F8807434A75EBEBD28886F400C747 -:103AD0008688000100582BC2740E8B5E10010729E6 -:103AE000467801467629467440E894FE72BE4A75CF -:103AF0001583BE8A000074B4BA50FFED8986820037 -:103B0000834E7A08EBA68DBEF40003BE8800A4FFA6 -:103B1000868800E86AFE729479064A748FE95BFF32 -:103B20004A74CEEBE19050E811CC8B467439467262 -:103B300074271E565133C9C5760CAD74107809032D -:103B4000C805010024FE03F03B761076ED294E7681 -:103B5000014E78E837CC595E1F58C390C47E1026BA -:103B60008B1D83C30326891D4B03FBAB91AAB803AE -:103B700000294678014676294674C390C47E1026F3 -:103B80008B1D4326891D4303FBAAFF4E78FF467613 -:103B9000FF4E74C3E8E5FFC38081848582838687F6 -:103BA00050538ADC83E30ED1EB2E8A87983B08863C -:103BB000B000FE86B100B00AE887D45B58C3508AD3 -:103BC000C8B8FF00E895FF58C3908A86BB00E8ABF1 -:103BD000FFC3E8CBFFE8F2FFC390E8C3FFE8B4FF00 -:103BE000C39033C0E895FFC3B8FF0033C9E86CFF4A -:103BF000C390B8FF01B110E862FFC390C3FC3BE281 -:103C00003BF23BF23BFC3BE23BE83BE83BFC3BE26C -:103C10003BE83BE83BFC3BE23BE23BE23B00100085 -:103C20000000100000001000000010000000100054 -:103C3000000010000000100000001000000008004C -:103C40000000080000000800000008000051538B2D -:103C50004E3881E1FFEEA804740481C900018AE0B6 -:103C600080E4032418D0E40AC433DB8AD82E8B877F -:103C7000FD3B89467C2E0B8F1D3C894E38D1EB2EA7 -:103C80008AA73D3C5B59C3AC493C01721D74203C82 -:103C900003722374283C08722B74303C20723774F2 -:103CA0003ABBDA3B32E4895E7EC3BBA03BEBF5BB9B -:103CB000943BB401EBF0BBFC3BB402EBE9BBE23B51 -:103CC000B403EBE2BBBE3BB404EBDBBBCA3BAC4989 -:103CD0008886BB00EBCEBBD23BEBF3BBFC3BEBC41B -:103CE000A9040075D1A9080075DAEBD18B5E748B3D -:103CF0004E783BCB72028BCB3BC872028BC88BC118 -:103D0000E32CC47E108BDF26033D4747F7467A013C -:103D100000751CF7C70100740249A4D1E9F3A5732B -:103D200001A4260107294678014676294674C35026 -:103D300053BB7F7FF7C70100740549AC22C3AAD1EA -:103D4000E9E31D9CAD23C3AB497414AD23C3AB4958 -:103D5000740DAD23C3AB497406AD23C3ABE2E59D3F -:103D60007304AC22C3AB5B58EBB8E8CEC98B5E38AA -:103D7000F7C310047501C3F7C340007405E8B8E346 -:103D8000EB03E8A8E3816638EFFBF6C310743CF65A -:103D9000C3027406E4D80C01E6D8F6C30474118398 -:103DA000C2088A86A7000C01EE8886A70083EA086D -:103DB000F6C308740FE88BE3720A8A86C000E638FF -:103DC000B023E60AF7C300047501C3F7C300087502 -:103DD000F98A86A500F6C340750DA81075EC0C1085 -:103DE0008886A500E60CC3A80175DF83C2020C0516 -:103DF000EE8886A500C3B000E847D2EB0FB002E81A -:103E0000900EEB08836638DF834E7A0233C08ED87B -:103E1000FAA0921240A292123C05721EC60692129D -:103E200000FBB001E86B0EFAA1260123062A01A8C7 -:103E3000017507E8E207E8610990B000E837D2FBB6 -:103E400085ED74B9FAF7467A460075C08B46783D21 -:103E50000A0072B08B4E7483F950729A836638DF11 -:103E6000C576148B463A85C07558AD85C0750FE888 -:103E7000F8FEF7467A08007493E8A0FAEB8E3B76DA -:103E8000047621B90200394E2E7705C7462E000070 -:103E9000568B762C897604C7040000464689762C1A -:103EA000294E2E5E85C07917F6C4107405FF567C26 -:103EB000EB03FF567E897614B00CE885D1EB86893A -:103EC000463AFF96800029463A897614B00CE8718C -:103ED000D1E971FF0000000000000000080410029A -:103EE00001200000000000000000000000000000B1 -:103EF00000000000808080808080808080808080C2 -:103F000080808080808080808080808080808080B1 -:103F100080808080808080808080808080808080A1 -:103F20008080808080808080808080808080808091 -:103F30008080808080C0C0C0C0C0C0C0C0C0C0C0C1 -:103F4000C0C0C0C0C0C0C0C0C0C0C0C0C0C0C080B1 -:103F500080808000808080808080808080808080E1 -:103F60008080808080808080808080808080808051 -:103F70008080808080808080808080808080808041 -:103F80008080808080808080808080808080808031 -:103F90008080808080808080808080808080808021 -:103FA0008080808080808080808080808080808011 -:103FB0008080808080808080808080808080808001 -:103FC00080808080808080808080808080808080F1 -:103FD000808080804E417841D041F44106421842B1 -:103FE000C3908E46028B7E22897E6C806627FD8B75 -:103FF000562483FA0472E983EA028BD93BCA76021B -:104000008BCAB00A57518BFEF2AE8BC1595F751E39 -:1040100050402BC874062BD12BD9F3A4594B4A4AD4 -:10402000B00DAAA43BCA76028BCAE313EBD42BD9FA -:10403000F7C601007402A449D1E9F3A57301A4896C -:104040007E222B7E6C297E24017E1A8BCB807E26DD -:10405000027405806626FDC360B0FDE8180361C3E5 -:10406000C390E87C0272F990834E26208B466A89C1 -:10407000466E8B46480D040025BFFF894648B006B2 -:10408000E8BFCFC3897E222B7E6C017E1A297E2455 -:10409000807E26027405836626FDC360B0FDE8D5E8 -:1040A0000261C3908ABEC200EB24F7464840007507 -:1040B000B18E46028B7E22897E6C8B562483EA0A5F -:1040C000789E03D7806627FD33C08ABEC200E3B462 -:1040D0003BFA77B0AC49932E8A87D43E9322DF75A2 -:1040E00017AAE3A03BFA779CAC49932E8A87D43E6B -:1040F0009322DF7503AAEBD6F6C37F7505FF4666EC -:10410000EBDFF6C340750C8BD883EB08D1E32EFFB1 -:10411000A7D43FFF46662C20EBC785C0742C894688 -:104120006A834E4840897E222B7E6C017E1A297E4E -:1041300024807E26027408836626FDE8A301C360FE -:10414000B0FDE8310261E89801C3E957FF908B5E4A -:10415000664B7803895E66AA8B5E64F7C3002075A0 -:1041600003E940FFF7C3400074088A86C100AAE94A -:1041700032FFB83200EBA3908B5E66895E6883C322 -:104180000880E3F8895E668B5E6481E3001881FB3A -:104190000018742DAA85DB7425F746644000751855 -:1041A00081FB0010740C8B46662B4668C1E004E965 -:1041B00068FFB86400E962FF8A86C100AAAAE9E341 -:1041C000FE518B4E662B4E68B020F3AA59E9D4FEFF -:1041D0008B5E66895E688B5E64F7C324007410C7CB -:1041E00046660000F7C304007405B00DAAB00AAA21 -:1041F000EB489090AAF7466400407406B8D007E9EF -:1042000018FFE99FFE90AAF7466400807406B8D0B4 -:1042100007E906FFE98DFE908B5E66895E6885DBA7 -:10422000750C8B5E64F7C310007406E976FE8B5E36 -:1042300064F7C308007427B00AAAF7C32000751FEB -:10424000F7C300017503E95BFEF7C340007506B8CC -:104250006400E9C5FE8A86C100AAAAE946FEAAC78B -:1042600046660000F7C3000674F1F7C340007419F6 -:104270008A86C10081E3000681FB00047206760293 -:10428000AAAAAAAAAAAAE91BFE81E3000681FB004A -:1042900004720E7606B89600E97FFEB86400E979EC -:1042A000FE8B4668E973FE90368B0EDA1283F93284 -:1042B000731D1E0633C08ED88EC08D764CBFDC12A7 -:1042C00003F9A5A5A583C106890EDA12071FC3B09D -:1042D00008E86ECDC390836648FEE893C4E8C8FF43 -:1042E000C3F6462702750F9CFA837E1A0074098074 -:1042F0004E27019DF9C3F8C35052F7463840007469 -:104300001DE834DE83C20AECA840752783EA088AD8 -:1043100086A5000C028886A500EE5A58EBD1E80C61 -:10432000DE8A86A50024FB0C028886A500E60C5ACE -:1043300058EBBC804E27025A589DF8C30846269C6D -:10434000FA8A8EA500F7463840007514F6C1067447 -:1043500023E8D9DD8AC124F98886A500E60C9DC32F -:10436000F6C102740FE8D0DD83C2028AC124FD8841 -:1043700086A500EE9DC38B5E2622C3884626740167 -:10438000C3806627FD9CFA8A8EA500F74638400058 -:104390007516F6C104750FE893DD8AC124FD0C047F -:1043A0008886A500E60C9DC3F6C10275F9E888DD94 -:1043B00083C20AECA820750E83EA088AC10C028821 -:1043C00086A500EE9DC383EA0A33C98A4E1C8B463C -:1043D0001A3BC8731B014E2A2BC189461A1EC5768B -:1043E00000F36E1F89760083C2028A86A500EBCD9A -:1043F00085C0741201462A8BC81EC57600F36E1F55 -:10440000897600894E1AF6C701752380CB02895E32 -:1044100026E808C383C2028A86A50024FDEE8886AA -:10442000A500F6C7107505B002E816CC9DC383C27F -:10443000028A86A500EB86908BD18B46243BC876FA -:10444000028BC82BD12BC18BD9E322806627FD8E2E -:1044500046028B7E22F7C601007402A449D1E9F31B -:10446000A57301A4897E22894624015E1A8BCA8025 -:104470007E26027405806626FDC360B0FDE8F6FE68 -:1044800061C350E40A84C0750A8686A10084C074A2 -:104490000AE60A580C20894648F9C35824DF8946A1 -:1044A00048F8C390FBB002E8E807FAE82E01FBB039 -:1044B00001E8DE07FAB002E8BCCBFB85ED74E5FA53 -:1044C0008E5E0AFB90FA8B46488B7640A88C75DE90 -:1044D000A820741A50E855DC58E8A6FF7310B00203 -:1044E000E85FCBEBC99025FF008BC8EB3690A801A5 -:1044F00075224683E6FE3B76087479AD8AFCB3F0FC -:1045000022FB3AFB74E03ABEA000742EE8D2FD73A1 -:1045100077EB9B908AE024FC8846488B4E4AF6C491 -:1045200002741DE8BBFD7286E813F3897640E393BD -:10453000834E4803894E4AE974FF25FF0F8BC890CC -:104540008B86980085C0741A518A8EA000C0E90439 -:10455000BA0100D3E25923C2740803F1897640E915 -:1045600061FFFF5662E3F5834E4801894E4A897622 -:1045700040E93AFF814E2600108B46503B46467775 -:1045800003E852FDE927FF9088BEA000EBAC0A06C5 -:1045900090128AE0BA0601B004EEEC84C07512B045 -:1045A00004EE8AC4EE32E4A8807406C706841200C2 -:1045B0000088269012C30A0690128AE0BA0601EC1F -:1045C000A80175EDBA08018AC4EE32E4A88074E14E -:1045D000C7068412000088269012C39036F706247E -:1045E0000101007530368B0EDA1280F936732633EE -:1045F000C08EC08ED8BFDC1203F9B008E877CA8538 -:10460000ED740E8D764CA5A5A580C10680F9367295 -:10461000E9890EDA12C3C390F7062601010075F688 -:104620008B0E201385C975EE33C08EC08ED8BF2483 -:1046300013B93600B00AE83DCA85ED7506E91201E6 -:10464000E90A0133DB8A464C8AA6B300FECC780E19 -:1046500088A6B3000ADCB40AAB83E90276E28AA634 -:10466000B200FECC780E88A6B2000ADCB408AB8398 -:10467000E90276CC8AA6B100FECC78188ABEB000DA -:10468000750488A6B00088A6B1000ADC8AE7AB836F -:10469000E90276AC8AA6B400FECC781F88A6B400E6 -:1046A0000ADCB40BAB8A86BC008AA6BD00AB8B8645 -:1046B000BE00AB83E90676888A464C8AA6B600FE21 -:1046C000CC781988A6B6000ADCB40CABE8DBCBAB1F -:1046D0008B462AAB83E90676748A464C8AA6B700D5 -:1046E000FECC781988A6B7000ADCB40DABE8BACBCB -:1046F000AB8B4634AB83E90676538A464C8AA6B820 -:1047000000FECC781988A6B8000ADCB40EABA15024 -:1047100012ABA15212AB83E90676328A464C8AA6C6 -:10472000B500FECC781888A6B5000ADCB40FAB8BB8 -:10473000869A00AB8B869C00AB83E906760F84DB00 -:104740007503E9EFFEB00AE8F8C8E9E7FEB00AE849 -:10475000F0C8F7D983C1368BC10D800086C4A3226F -:10476000134141890E2013C3A184122BC17211A3DE -:104770008412BE2213D1E9F36F90890E2013F8C37F -:10478000F9C3C381EF6A1374F98BC70D800086C427 -:10479000A368134747893E6613C3F7062A01010041 -:1047A00075E08B0E6613E30780F92077D54949330E -:1047B000C08EC08ED8BF6A138BF703F983C6343B13 -:1047C000FE77C0B00EE8AEC885ED74B78A464C8A55 -:1047D000B6B900FECE781588B6B9008AA6A90080C1 -:1047E000CCC0AB84F67405B00EE856C88AB6BA00E1 -:1047F000FECE78CB8A9EA9008ABEAB008A563F8A3D -:10480000F332F70AB6AC00C686AC000022F2744B55 -:10481000F6C608740FB402F6C3087502B403AB8081 -:10482000E6F77437F6C601740FB400F6C3017502DB -:10483000B401AB80E6FE7423F6C602740FB404F62E -:10484000C3027502B405AB80E6FD740FF6C60474AE -:104850000AB406F6C3047502B407ABC686BA0000F4 -:10486000889EAB00E958FF90A184122BC17211A35E -:104870008412BE6813D1E9F36F90890E6613F8C3F2 -:10488000F9C3A1841241412BC17223A384128BC1AD -:10489000484832E40C8086C4EF9090909090BEDC43 -:1048A000124949D1E9F36F90890EDA12F8C3F9C3BE -:1048B0008AC88A464CB40183EB06EF9090909090A2 -:1048C000B80100EF90909090908AC1EF90909090F6 -:1048D00090E99700E9AC0033C08ED8891E8412C3DA -:1048E000368B1E8412FB90FAB00CE889C785ED74F4 -:1048F000E6C5760C83FB1472DBFB90FAAD85C078BD -:10490000AF74E28BFE03F8368B0E86123BC1770242 -:104910008BC883EB043BD977028BCB33C08A464CE0 -:10492000EF90909090908BC1EF90909090904180FC -:10493000E1FE2BD951D1E9F36F90598BC74024FE8A -:104940003BC674272BFE4E4E538B5E103BF3721307 -:10495000031F83C30380E3FEC7070000836E740256 -:10496000895E105B893C89760CEB8989760C3976F7 -:104970001077817208833C007403E977FFE80DBE6D -:10498000E962FF36891E8412B00CE8B5C633C08ECA -:10499000D8C3A184123D10007277BA04013B068887 -:1049A000127506C7067E1200008B0EDA12E30BE8C2 -:1049B000D0FE7257C7067E12FF7F8B0E2013E30BCB -:1049C000E8A5FD7246C7067E12FF7F8B0E6613E3D5 -:1049D0000BE894FE7235C7067E12FF7FA12801A95D -:1049E00001007503E8F9FE803E8D1200751DA1845B -:1049F000123D200076153B0682127609A17E123BFD -:104A0000068012720C800E901280C3B080FF167C5C -:104A100012C3800E901240C36A001FC6069312177D -:104A20009C0EE8B7C86A001FC6069312209C0EE8C9 -:104A3000AAC86A001FC6069312169C0EE89DC8906D -:104A4000BA0601ECA82075CAFB90FABA0401ED90F1 -:104A5000909090903A06941277BE33DB8AD8D1E3D7 -:104A60002E8BAF4400C47E0885FF74B9F6C4C075B0 -:104A70005532C0C1E00280E4F08BF0ED9090909050 -:104A80009085C074BB8BC84180E1FE0BC68B5E5025 -:104A90004B4B2BD9789CAB8BC1404001464ED1E9A2 -:104AA000F36D90895E50897E088B462680E4EF89FD -:104AB0004626F6C401750CF746480C007505B00291 -:104AC000E87FC5E97AFF86C48BC883E13F4180E176 -:104AD000FEE30A3C807209243FB4F0EBB0E960FFCA -:104AE000253F0033FF8EC7BF96128BF7D1E9F36DD8 -:104AF000908BC8E848EDE947FF906A001FC606930F -:104B0000121B9C0EE8D5C790601E0633C08ED88E4F -:104B1000C0BA0601ECA80474E1B006EEECA28C1257 -:104B2000A8407411A18812A38412C6068D1200E851 -:104B300060FEA08C12A8807403E804FFB80080BA5D -:104B400022FFEF071F61CF906A001FC60693121B5A -:104B50009C0EE887C790601E0633C08ED88EC0BA00 -:104B60000601ECA80474E1BA0801ECA28C12A8407A -:104B70007411A18812A38412C6068D1200E812FED9 -:104B8000A08C12A8807403E8B6FEB80080BA22FF99 -:104B9000EF071F61CF90EE86E0EE86E0EC86E0EC5A -:104BA00086E080E1FEF36C9080E1FEF36E900500FC -:104BB0007547A84B05007548A84B0500A348A84BAE -:104BC00005003549A84B06009848964B0600BA48A0 -:104BD000964B0600C348964B0600CB48964B060002 -:104BE0002049964B06002849964B06004E4A9C4B9E -:104BF00006007B4A9C4B05009E4AA24B0500EC4AEE -:104C0000A24B00001E06833E4412007409A0060158 -:104C100024303C30741A8CC88ED88EC0BBAE4B8BFF -:104C20000FE30D8B7F028B7704F3A483C306EBEFB6 -:104C3000071FC39033C0A33E01B90C01BE40018BD6 -:104C4000FE81C6B40F89048BC62BF13BC777F6A350 -:104C50003C01C3901E0660368B2E3E018B5E003BEE -:104C6000EB742B8B7602891C89770236A13C018973 -:104C7000460036892E3C018BEBFF4E0674088B6E86 -:104C800000FF4E0675F836892E3E018B66046107DB -:104C90001FC31E0660368B2E3E0198894606896624 -:104CA000043B6E0074108B6E00FF4E0675F836895B -:104CB0002E3E018B660461071FC3C3901E06609CD5 -:104CC000FA33ED8EDD8B2E3C0185ED743D8B4E006D -:104CD000890E3C018BCC8DA60A01561E06608966A2 -:104CE00004C746080F1AC7460601008B1E3E018501 -:104CF000DB741D8BC58707894600895E028BD889C6 -:104D00006F028BE19D61071FF8C39D61071FF9C307 -:104D1000892E3E01896E00896E0287E19D8BE1EB51 -:104D2000E4000D0A5465726D696E616C73207375D1 -:104D300070706F727465643A0D0A312920414E53C8 -:104D40004920636F6D70617469626C650D0A322968 -:104D500020577973652033300D0A506C6561736597 -:104D60002073656C6563743A20000D0A636F646597 -:104D7000207365676D656E743D000D0A4D6F6E6939 -:104D8000746F722076322E350A0D0A3E000D0A50DD -:104D90006172646F6E3F000D0A4E6F206164647231 -:104DA00065737320737065636966696564000D0AD5 -:104DB0003A000D0A004C6F633D000D0A4641544114 -:104DC0004C204552524F523D000D0A4D6F6E697492 -:104DD0006F7220636F6D6D616E64733A2D0D0A20E2 -:104DE0002020442C645B5B787878783A5D7878781A -:104DF000785D202D2064756D70206D656D6F727902 -:104E00000D0A2020204C2C6C5B5B787878783A5D1A -:104E1000787878785D202D2064756D702073696EC8 -:104E2000676C65206C696E650D0A202020452C6535 -:104E30005B5B787878783A5D787878785D202D209B -:104E400065646974206D656D6F72790D0A2020208C -:104E5000462C665B5B78787878205D787878785D2A -:104E6000202D2066696C6C206D656D6F72792070E5 -:104E70006172616772617068730D0A202020495B5E -:104E8000787878785D202020202020202020202D78 -:104E900020776F726420696E7075742066726F6D12 -:104EA00020706F72740D0A202020695B7878787802 -:104EB0005D202020202020202020202D20627974B9 -:104EC0006520696E7075742066726F6D20706F72E8 -:104ED000740D0A2020204F78787878207878202068 -:104EE000202020202020202D206F757470757420C4 -:104EF000776F726420746F20706F72740D0A2020B7 -:104F0000206F787878782078782020202020202042 -:104F100020202D206F75747075742062797465205F -:104F2000746F20706F72740D0A202020475B5B78CD -:104F30007878783A5D787878785D2020202D206721 -:104F40006F746F20616464726573730D0A20202092 -:104F5000575B5B787878783A5D787878785D202050 -:104F6000202D207761746368206120776F72640D53 -:104F70000A20202043202020202020202020202024 -:104F800020202020202D20696E7465727275707447 -:104F900073206F66660D0A202020532020202020D9 -:104FA00020202020202020202020202D20696E7409 -:104FB00065727275707473206F6E0D0A20202073F5 -:104FC00020202020202020202020202020202020E1 -:104FD0002D2073696E676C6520737465700D0A20EF -:104FE000202042787878782020202020202020203F -:104FF0002020202D20627265616B706F696E7420B5 -:105000007365740D0A20202062202020202020209B -:105010002020202020202020202D20627265616B1E -:10502000706F696E7420636C6561720D0A202020B8 -:10503000522020202020202020202020202020203E -:10504000202D207265737461727420627265616BC9 -:10505000706F696E740D0A2020207220202020209D -:1050600020202020202020202020202D2072656755 -:105070006973746572732061742062726B70740D51 -:105080000A202020582C78206E202020202020204C -:1050900020202020202D206578616D696E652063B9 -:1050A00068616E6E656C206E0D0A202020482C3FD2 -:1050B00020202020202020202020202020202D20E3 -:1050C00074686973206D657373616765001B5B327B -:1050D0004A1B5B313B3148414E5349205465726D48 -:1050E000696E616C0D0A0A001B5B4B001B5B4A007A -:1050F0001B5B324A1B5B313B3148001B5B44201B6E -:105100005B44001B5B313B373248001B5B003B00BC -:1051100048001B5B73001B5B75001B7A2B0B7F1B0E -:105120007A2E0C7F1B7A2D087F1B7A2C0A7F1B7A24 -:1051300022087F1A57797365203330205465726DC9 -:10514000696E616C0D0A001B54001B59001A001E89 -:105150000008200800001B3D0000001B46000D0059 -:105160003F4464456546664767486849694F6F43F1 -:1051700063537342625272577758784C6C3C60D4D8 -:1051800057D45750585058D659D659B459B4593C99 -:10519000603C606C57485726570657905790579871 -:1051A00057485F0C5F585F335F405FA057A057FEC2 -:1051B00059FE59DC57DC5788619861C061CC61D8D1 -:1051C00061F66102622262F8564A625862605920B2 -:1051D00020666C6167733D00202061783D002020CF -:1051E00062783D00202063783D00202064783D00F7 -:1051F000202063733D00202064733D0020206573F0 -:105200003D00202073733D00202064693D00202074 -:1052100073693D00202062703D00202073703D00C6 -:10522000202069703D00206368616E656C3D002040 -:105230002020207365673D002074695F7374723DA0 -:10524000002074695F746F733D002074695F6D6145 -:10525000783D002074695F6261733D002074695F6E -:1052600073697A3D002074695F7374663D00207431 -:10527000695F726F6F3D002074695F666C673D0007 -:105280002074695F746F743D002072695F70636E93 -:105290003D002072695F7374723D002072695F7314 -:1052A00074663D002072695F726F6F3D0020726905 -:1052B0005F6261733D002072695F73697A3D00200F -:1052C00072695F746F743D002072695F6D696E3D35 -:1052D000002072695F666C673D002072695F746FC1 -:1052E000733D002072695F7468723D002074685FCE -:1052F0007374663D002074685F7374723D0020749F -:10530000685F6261733D002074685F73697A3D0075 -:105310002074685F7472673D002074685F666C6714 -:105320003D002074685F636E743D002072685F7397 -:1053300074723D002072685F7374663D002072686D -:105340005F6261733D002072685F73697A3D00207F -:1053500072685F7370613D002072685F61736F3DBA -:10536000002072685F726F6F3D002072685F666C2C -:10537000673D00206D5F636172653D002070745F62 -:10538000666C6F3D002061735F666C6F3D0020723C -:105390006D5F666C6F3D00202020715F696E3D007F -:1053A0002020715F6F75743D0020715F6472616EC3 -:1053B0003D002020715F74696D3D00202020715FE9 -:1053C00066633D0020715F737461743D0020715FFE -:1053D000646174613D0020715F6D6F646D3D0020FC -:1053E00068616E645F6F3D002068616E645F623D5E -:1053F000002068616E645F653D002068616E645FD7 -:10540000693D0020206F706F73743D002020746927 -:105410006D656F3D0020637573746D313D002063D1 -:105420007573746D323D0020637573746D643D0057 -:10543000207478726174653D0020727872617465C1 -:105440003D002020635F6D61703D0020635F6164FB -:1054500064723D0020635F616973723D0020635F89 -:10546000787461673D0020635F646566723D00206B -:10547000635F666C73683D002074786D6178733D7E -:10548000002072695F656D733D002020635F6C735F -:10549000723D002020635F6965723D002020635FDC -:1054A0006663723D002020635F6D63723D002020C3 -:1054B000635F6C63723D002020635F6473733D0023 -:1054C00020635F647373693D0020635F647373726C -:1054D0003D002020635F6973723D002020635F639D -:1054E00061723D002020635F6566723D0020635F4E -:1054F000657273743D0020635F65636E743D0020C8 -:10550000635F62726B633D0020635F626F6B633D3C -:105510000020635F7265706C3D0020635F6363739E -:10552000723D0020635F737474313D0020635F73CC -:105530007474323D002BC08ED88EC0E8C200E8E5FE -:1055400000FABF8400C705DC568C4D02BF0C00C7B3 -:10555000056E5E8C4D02BF0400C705BA5E8C4D021D -:10556000E8F10090E84901E81600F490E8E500BE93 -:10557000BA4DE8090CA09312E85D0CE8C209EBE40F -:10558000E8D50CE8C40C0AC074F68B1EF8793C0D03 -:10559000742E3C0874173C7F741383FB207FE188D2 -:1055A00087D67943891EF879E8770CEBD30BDB7447 -:1055B000CF4B891EF8798B36167AE8C10BEBC19078 -:1055C000E80200EBBBC687D679000BDB741EA0D6C1 -:1055D00079BF6051B91D008BD9060E07F2AE077571 -:1055E00017412BD9D1E32EFF977D519033C0A3F8FB -:1055F00079BE894DE8870BC3BE8D4DE8800BEBEC7F -:10560000BA0002B093EEB055EEBA1002B093EEB00D -:10561000AAEEBA0002EC3C557508BA1002EC3CAA9E -:105620007403E82FF6C3BA0402B01AEEB020EEB04D -:1056300030EEB040EEB080EEBA0002B013EEB0072C -:10564000EEBA0802B080EEBA0202B0BBEEBA0402B3 -:10565000B005EEC3C606CA1301C706F8790000C636 -:1056600006F67901C706D0790000C706D279000096 -:10567000C706D4790000C706FA790000C706FC798E -:105680000000C706FE790000C706007A0000C706C2 -:10569000027ACE598C0E047AC706067A0000C70635 -:1056A000277A0000C606297A00C6062A7A00C39027 -:1056B000BE224DE8C80AE83F002C313C0177F7E8EC -:1056C00081098B360C7AE8B50ABE6A4DE8AF0A0E3E -:1056D00058E8F80ABE7A4DE8A40AC39060D1E38383 -:1056E000FB1873111EBA00008EDA2EFF97B7518B8C -:1056F000EC8946101F61CF90E84F0B0AC07505E892 -:10570000560BEBF4C390833EF879017416BED7793B -:10571000E8310A8BD0AC3C2C74043C207505E8239E -:105720000AEEC3E9D2FE833EF8790174F6BED7795A -:10573000E8110A8BD0AC3C2C74083C207404E9B707 -:10574000FE90E8FF09EFC3908B16067A833EF87946 -:1057500001740BBED779E8EB098BD0A3067AB02091 -:10576000E8570B8B16067AECE86F0BC38B16067A9C -:10577000833EF87901740BBED779E8C7098BD0A3B3 -:10578000067AB020E8330B8B16067AEDE8670BC378 -:10579000FAC606F67900C390C606F67901FBC390F7 -:1057A00006E85809B020E8110B268B05E8470BB036 -:1057B00008E8060BE8030BE8000BE8FD0AB8010057 -:1057C000E8CFF4BA0202EC24017502EBDCBA06025F -:1057D000EC07C390C706087A1000EB06C706087AE4 -:1057E0000100068E06FC798B3EFA79E80E09E80B7B -:1057F00000893EFA798C06FC7907C390BEB24DE869 -:105800007C098B16087A52E82A09E80F0AE80C0A84 -:1058100033DBB9100090268A01E8BC09E8FD094392 -:10582000E2F4E8F709E8F40933DBB9100090268ABE -:10583000013C2072053C7E760390B02EE8E30943DC -:10584000E2ECBEB24DE8360983C7105A4A75B7C3B9 -:10585000068E06007A8B3EFE79E8A008893EFE7926 -:105860008C06007A578B360E7AE81209C706087A3A -:105870001000BA0002E8E800E881FF5FBA0000E823 -:10588000DE00BEB54DE8F6088CC0E83F09B03AE846 -:1058900090098BC7E83509E87E08E8C30090E8B7AF -:1058A00009E8A6090AC074F63C0B750683EF10EBF5 -:1058B00019903C0A750683C710EB0F903C0C7504D9 -:1058C00047EB07903C0875244F908B36FE798BC7C9 -:1058D0002BC63D000172A53D1001720483EE20909D -:1058E00083C6108936FE79578BFEEB803C2E7508F7 -:1058F000BA0113E86A0007C3C6060A7A0232C990E1 -:105900003C30724C3C39760C245F3C4172423C4640 -:10591000773E2C072C3050E8CC085802C8FE0E0AFF -:105920007A740FC0E104E82F09E81E090AC074F672 -:10593000EBCE26880DE8E0078AD0E823008AC13C38 -:105940002072053C7E760390B02EE8D508E970FF02 -:10595000E8C507E80A00268A05E87C08E91DFF90EB -:10596000F606267A02750286F2528B361A7AE80D0E -:10597000085A528AC60206247AF606267A01750665 -:10598000E89F08EB0D9032E4E80D088B361C7AE8AE -:10599000EC075A8AC20206257AF606267A017506AF -:1059A000E87F08EB069032E4E8ED078B361E7AE8D4 -:1059B000CC07C390068E06047A8B3E027AE83C0739 -:1059C000893E027A8C06047A07FF1E027AC3BE97CC -:1059D0004DE8AA07CB900657BED779E866078BD863 -:1059E000E861078BC82BCB78118EC3BF0000B8FFCE -:1059F000FF51B90800F3AB59E2F75F07C39006BE49 -:105A0000D779E83F078BD8D1E32E8B9F4400BE2681 -:105A100052E8F1088BC3E8DD08B80100E873F2E84A -:105A2000E008BE2F52E8DD088B4718E8C808BE77AB -:105A300052E8D1088B4726E8BC08BE5352E8C50897 -:105A40008B471EE8B008BE5C52E8B9088B4720E8D7 -:105A5000A408BE6E52E8AD088B4724E89808BE80C3 -:105A600052E8A1088B472AE88C08E89508BE38520E -:105A7000E892088B07E87E08BE4152E887088B470A -:105A80001AE87208BE4A52E87B088B471CE8660891 -:105A9000BE6552E86F088B4722E85A08E86308BEE3 -:105AA000D152E860088B4738E84B08BEAD52E85445 -:105AB000088B4730E83F08BEB652E848088B4732AB -:105AC000E83308BEA452E83C088B472EE82708BEFE -:105AD000BF52E830088B4734E81B08E82408BE8929 -:105AE00052E821088B4704E80C08BE9252E81508DA -:105AF0008B4714E80008BE9B52E809088B472CE846 -:105B0000F407BEC852E8FD078B4736E8E807BEDA5F -:105B100052E8F1078B473AE8DC07BEE352E8E507B5 -:105B20008B473CE8D007E8D907BE1953E8D6078B66 -:105B30004748E8C107BEFE52E8CA078B4742E8B5AE -:105B400007BE0753E8BE078B4744E8A907BE7C534E -:105B5000E8B2078B474CE89D07BE8553E8A6078B44 -:105B6000474EE89107BE8E53E89A078B4750E88569 -:105B700007E88E07BE2253E88B078B474AE8760773 -:105B8000BEEC52E87F078B4708E86A07BEF552E88B -:105B900073078B4740E85E07BE1053E867078B47E3 -:105BA00046E85207E85B07BE6A53E858078B477A16 -:105BB000E84307BE3D53E84C078B4770E83707BE04 -:105BC0004653E840078B4772E82B07BE4F53E83433 -:105BD000078B4774E81F07E82807BE2B53E8250703 -:105BE0008B470CE81007BE3453E819078B4710E8C1 -:105BF0000407BE5853E80D078B4776E8F806BE61E8 -:105C000053E801078B4778E8EC06BE7353E8F506C6 -:105C10008B473EE8E006E8E906BE9753E8E6068BC8 -:105C20004752E8D106BEA053E8DA068B4754E8C5D0 -:105C300006BEA953E8CE068B4756E8B906BEB25356 -:105C4000E8C2068B4758E8AD06BEBB53E8B6068BE4 -:105C5000475AE8A106BEC453E8AA068B475CE895FC -:105C600006E89E06BECD53E89B068B475EE8860697 -:105C7000BED653E88F068B4760E87A06BEDF53E84E -:105C800083068B4762E86E06BEE853E877068B47CB -:105C90007CE86206BEF153E86B068B477EE8560649 -:105CA000BEFA53E85F068B878000E84906E8520693 -:105CB000BE4254E84F068B879E00E83906BE035467 -:105CC000E842068B4764E82D06BE0C54E836068B86 -:105CD000476EE82106BE1554E82A068B878E00E839 -:105CE0001406BE1E54E81D068B879000E80706BE0A -:105CF0002754E810068B879200E8FA05E80306BEF1 -:105D00003054E800068B879400E8EA05BE3954E871 -:105D1000F3058B879600E8DD05BE6F54E8E6058B3A -:105D2000879800E8D005BE5D54E8D9058A87A000B1 -:105D3000E8A705BE5454E8CC058A4728E89B05BE71 -:105D40006654E8C0058A87A100E88E05E8B305BE61 -:105D50007854E8B0058A87A200E87E05BE8154E841 -:105D6000A3058A87A300E87105BE8A54E896058AD0 -:105D700087A400E86405BE9354E889058A87A500D6 -:105D8000E85705BE9C54E87C058A87A600E84A05CA -:105D9000BEA554E86F058A87A700E83D05BEAE544E -:105DA000E862058A87A800E83005E85505BEB754C3 -:105DB000E852058A87A900E82005BEC054E84505D9 -:105DC0008A87AA00E81305BEC954E838058A87AB5C -:105DD00000E80605BED254E82B058A87AD00E8F935 -:105DE00004BEDB54E81E058A87AE00E8EC04BEE47E -:105DF00054E811058A87AF00E8DF04BEED54E804DB -:105E0000058A87B000E8D204E8F704BEF654E8F447 -:105E1000048A87B100E8C204BEFF54E8E7048A8719 -:105E2000B200E8B504BE0855E8DA048A87B300E892 -:105E3000A804BE1155E8CD048A87BB00E89B04E89E -:105E4000C004BE1A55E8BD048A87BC00E88B04BEB6 -:105E50002355E8B0048A87BE00E87E04BE2C55E8CE -:105E6000A3048A87BF00E87104E8960407C36006AC -:105E70001E168BECFF4E16F7461A00027401FBB893 -:105E800000008ED88EC0892E2D7AE8CB0081661A4C -:105E9000FFFEC6062A7A00E8D800B8005FA32B7A76 -:105EA000E85D00803E2A7A00740A814E1A0001C61D -:105EB000062A7A00171F0761CF9060061E168BEC2A -:105EC000F7461A00027401FBB800008ED88EC08914 -:105ED0002E2D7A81661AFFFEC6062A7A00E8920005 -:105EE000B8005FA32B7AE81700803E2A7A00740A74 -:105EF000814E1A0001C6062A7A00171F0761CF904B -:105F0000B8F000E88CEDFF262B7AC390065356803C -:105F10003E297A007403E83F00BED779E825028B5A -:105F2000D8A3277A2E8A07A2297AB0CC2E88075EBA -:105F30005B07C3C6062A7A00B80A5FA32B7AC39010 -:105F40008B2E2D7AE82B00C3C6062A7A01E80800BA -:105F5000B80A5FA32B7AC39057803E297A00740F4A -:105F60008B3E277AA0297A2E8805C606297A005FFB -:105F7000C390BEB24DE80602BED851E80002FF76DB -:105F80001458E84702BEDE51E8F301FF760E58E8E8 -:105F90003A02BEE451E8E601FF761258E82D02BE4F -:105FA000EA51E8D901FF761058E82002BE1452E801 -:105FB000CC01FF760A58E81302BE1A52E8BF01FF6F -:105FC000760C58E80602BECF51E8B201FF761A58A7 -:105FD000E8F901BEB24DE8A501BEF051E89F01FF0E -:105FE000761858E8E601BEF651E89201FF760258AD -:105FF000E8D901BEFC51E88501FF760458E8CC01E0 -:10600000BE0252E87801FF760058E8BF01BE085290 -:10601000E86B01FF760658E8B201BE0E52E85E0159 -:10602000FF760858E8A501BE2052E85101FF761618 -:1060300058E89801BE894DE84401C390BEC94DE8B7 -:106040003C01C33C0074053C017459C3C7060C7A7B -:10605000CD50C7060E7AF050C706107AE850C70632 -:10606000127AEC50C706147AF450C706167AFB5021 -:10607000C706187A0351C7061A7A0B51C7061C7A4D -:106080000E51C7061E7A1051C706207A1251C70654 -:10609000227A1651C606247A01C606257A01C6065A -:1060A000267A03C3C7060C7A1A51C7060E7A4D51D9 -:1060B000C706107A4751C706127A4A51C706147AA2 -:1060C0004F51C706167A5151C706187A5551C7065F -:1060D0001A7A5651C7061C7A5951C7061E7A5A5168 -:1060E000C706207A5B51C706227A5E51C606247A1B -:1060F00020C606257A20C606267A02C3A1F879486A -:106100007414BED779E83C008BF8AC3C3A75078E26 -:10611000C7E830008BF8C3908BC72B06FE798AF056 -:10612000240F8AD002D002D080C20BC0EE0480C6F9 -:1061300003043DC38CC0E89300B03AE8E4008BC789 -:10614000E88900C35133C990AC3C2074FB900AC06D -:1061500074262C3072223C0976143C11721A2C07DA -:106160003C0F760A3C2A72102C203C0F770A98C10B -:10617000E10403C8ACEBD7904E8BC159C390068C99 -:10618000C88EC0E8020007C3268A04460AC0740607 -:10619000E88F00EBF390C3900BC0747A5133D2B9FF -:1061A000E803F7F18BCAE803008BC159BA6400F623 -:1061B000F2E80C008AC498B20AF6F2E802008AC437 -:1061C000500AF074050430E8580058C386C4E80744 -:1061D0000086C4E80200C390C1C804E80800C1C03A -:1061E00004E80200C3905350240FBBCA622ED7E8C4 -:1061F0003000585BC39086C4E8070086C4E80200FC -:10620000C39050B908008AE032C0D1C00430E81110 -:1062100000E2F558C390B030E80700C3B020E801B1 -:1062200000C3568B36D0798884D0774681E6FF014B -:10623000FF06D4798936D079813ED479FE0175087C -:1062400056E814005EEBF1905EC3BA0202EC240142 -:106250007404BA0602ECC390803EF67900740960BB -:10626000B80100E82CEA6190BA0202ECA804742894 -:106270008B36D279833ED47900741D8A84D07746D8 -:1062800081E6FF018936D279FF0ED479BA0602EE93 -:10629000BA0202ECA80475DCA1D479C352BA060292 -:1062A000EE5AC3905250BA0202ECA8047408585A2D -:1062B000E8E9FFF9C390585AF8C35250BA0202EC09 -:1062C000A80474FB585AE8D3FFC330313233343555 -:1062D0003637383941424344454653508AE080E4DA -:1062E0000FBBCA62C0E8042ED7E8CEFF8AC42ED7FF -:1062F000E8C7FF585BC386E0E8DFFF86E0E8DAFF27 -:10630000C390BEB24D502EAC3C007405E8ABFFEB21 -:10631000F558C390C808000056578B7604BF040098 -:10632000C746FC0000C746FA0000C746F8000083D5 -:106330007E0600750E56E8B60E590BC075058BC764 -:10634000E95B018B46FC8946FE0BFF7505B8010031 -:10635000EB0233C05056E8A40D5959B4008946FCED -:106360008B5EFC83FB087603E92B01D1E32EFFA7AC -:10637000B264B80300E92601837EFA007414C746AC -:10638000FA00008A445898508A44599850E8C20F3D -:106390005959837EF800740AC746F8000056E89BF6 -:1063A0000859837E060075058BC7E9F10083FF0459 -:1063B0007503E9E6008BC7E9E400837EFE00750300 -:1063C000BF0200E9D500837EFE007503BF0100E92E -:1063D000C9008B5EFE83FB077603E98600D1E32EBE -:1063E000FFA7A26433FFE97F00BF0400807C580F41 -:1063F0007422837EF800751CFE44586A0856E87EB5 -:106400000C59598A445804805056E8720C5959C79F -:1064100046FA0100837EF800740AC746F800005669 -:10642000E8190859EB42BF0400807C5800742283AD -:106430007EF800751CFE4C586A0856E8410C595904 -:106440008A445804805056E8350C5959C746FA0119 -:1064500000837EF800740AC746F8000056E8DC079F -:1064600059EB05BF0400EB00EB31BF0400EB2CC778 -:1064700046F801006A0856E8050C5959807C58090D -:106480007D04B00FEB02B00004805056E8F00B59C9 -:1064900059BF0400EB05BF0400EB00E9A5FE5F5EF9 -:1064A000C9C3E4636364636463646364E963266427 -:1064B00051647863BA63C6639664D2636A646A643B -:1064C0006F647263C808000056578B76048B7E0891 -:1064D0006A0156E8A90B59598A4606C0E0060480AD -:1064E0005056E89A0B5959C746FE0000897EF8EBD2 -:1064F00003FF46FE8B5EF8FF46F8803F0075F2838F -:106500007EFE107D25B810002B46FED1F88946FC92 -:10651000C746FA0000EB0B6A2056E8620B5959FF98 -:1065200046FA8B46FA3B46FC7CEDEB0C8BDF478A48 -:10653000075056E8490B5959803D0075EF6A0256DD -:10654000E83C0B5959EB005F5EC9C3C80400005614 -:10655000578B7E04C746FE0000BE1400E909018B7C -:106560005EFE83C3042BDF8A87AC0B88445AC64483 -:1065700058088A46FE884459C744060000C6441994 -:1065800000C6441A00C6441B00C6441D0DC6441E66 -:1065900003C6441F00C6442000C6442100C6445B15 -:1065A00000C6445D00C6445E00C6445F00C6446049 -:1065B00000C746FC0000EB0D8B5EFCD1E3C740300A -:1065C0000000FF46FC837EFC107CEDC746FC00000B -:1065D000EB0A8B5EFCC6405000FF46FC837EFC0449 -:1065E0007CF0C744540000C7445600008A445A98BF -:1065F000BAF80023D0B805000BC28946FC9CFA8A81 -:1066000046FCBAFE00EEBA0000EC9D24088846FC69 -:10661000837EFC007502EB4AFF76FEE87A0C59682F -:10662000350256E8320A59590BC07534683802569B -:10663000E8250A59590BC0752768420256E8180A1E -:1066400059590BC0751A684C0256E80B0A59590B78 -:10665000C0750D68560256E8FE0959590BC0740200 -:10666000EB00FF46FE83C662397EFE7D03E9EFFE46 -:10667000EB005F5EC9C3C808000056578B4604BADA -:106680006200F7EA0514008BF0837E06007405B8FB -:106690001000EB03B808008944048A460888445C6B -:1066A00056E85904598BF88BC78944568944548A53 -:1066B000445D88442F0BFF751D68C20F6A0156E8C0 -:1066C00002FE83C406EB006A0156E847FC59590BE9 -:1066D000C075F4BF0100897EFAB90500BBE96A2ED6 -:1066E0008B073B46FA74074343E2F4E9A4032EFF09 -:1066F000670AC744060200C74408F4088B5E04D149 -:10670000E38B87FC0889440A33C08BF8894454E939 -:10671000800356E8BB0559BF01008A445D88446088 -:10672000E96F03837C04087530807C5C0175158AF1 -:10673000445DB400D1E08BD8FFB7E40856E8F70811 -:106740005959EB138A445DB400D1E08BD8FFB7C42C -:106750000856E8E2085959EB2E807C5C0175158AD1 -:10676000445DB400D1E08BD8FFB7D40856E8C70821 -:106770005959EB138A445DB400D1E08BD8FFB7B40C -:106780000856E8B20859596A0156E887FB59598BEF -:10679000D883FB03772AD1E32EFFA7E16ABF01006C -:1067A0008A445D88445EEB188A445D04FF240788B0 -:1067B000445DEB0C8A445DFEC0240788445DEB0019 -:1067C000E9CF028A445DB400D1E08BD8FFB7FD0267 -:1067D00056E863085959681D0356E85A0859596A1A -:1067E0000156E82FFB59598BD883FB037736D1E349 -:1067F0002EFFA7D96ABF01008A445D88445FEB245D -:106800008A445D04FF8A540480C2FF22C288445D2A -:10681000EB128A445DFEC08A540480C2FF22C28803 -:10682000445DEB00E96B028B5C0683C3FED1E38B16 -:10683000400889048B1CFF77066A0056E885FC83B4 -:10684000C4068B5C064BD1E38B40088944028B5C09 -:1068500002FF77066A0156E86AFC83C4066A01569D -:10686000E8B1FA59598BD883FB037603E91F02D1AB -:10687000E32EFFA7D16A8B5C028B47048944028B0D -:106880005C02803F44750D8B5C028A4701B4003B7B -:1068900044047DE28B4604D1E08B1C03D88B440278 -:1068A0008947088B5C064BD1E38B4402894008E999 -:1068B000DE018B5C028B47028944028B5C02803FC5 -:1068C00044750D8B5C028A4701B4003B44047DE2B1 -:1068D0008B4604D1E08B1C03D88B44028947088B7C -:1068E0005C064BD1E38B4402894008E9A201BF0159 -:1068F00000E99C018B5C028A07B4008946F8B90C58 -:1069000000BBA16A2E8B073B46F874074343E2F4B1 -:10691000E977012EFF67188B4604D1E08B5C0203F8 -:10692000D88B47088B5C06FF4406D1E38940088B6F -:106930001C807F010074128B5C028A47018B1C8AC9 -:106940005701B6008BDA884018E94001FF4C06E990 -:106950003A018B5C028A47018B1C8A5701B6008B77 -:10696000DA884018E925018B5C028A47018B1C8A72 -:106970005701B6008BDA884018FF4C06E90D018BF1 -:106980005C028A47018B1C8A5701B6008BDA3040C3 -:1069900018E9F800B8F0108BF88944548A445F88ED -:1069A000445DE9E7008A441C983D020074073D03FA -:1069B000007402EB07C746FE0000EB2B8A441C98CC -:1069C000D1E08BD8FFB7690256E86B0659596A01C6 -:1069D00056E840F959598946FE837EFE00740683C5 -:1069E0007EFE0375E9EB00837EFE0374628A441C1D -:1069F00098D1E08BD8FFB76D0256E83A0659595640 -:106A0000E84D97598946FC8B5EFC83EBFE83FB03C4 -:106A10007733D1E32EFFA7996A68AC0256E81706D0 -:106A20005959EB23688F0256E80C065959EB186840 -:106A3000750256E801065959EB0D68C60256E8F68C -:106A4000055959EB02EB006A0156E8C7F85959BFDE -:106A50000100EB3868DD0256E8DC0559596A015639 -:106A6000E8B1F85959BF0100EB22B8D0308BF88952 -:106A700044548A446088445DEB12B8E0208BF88966 -:106A800044548A445E88445DEB02EB00EB02EB0069 -:106A9000EB00E941FC5F5EC9C3196A246A2F6A3AB8 -:106AA0006A0000010002000400410042004300446B -:106AB00000800081008200FF001769546A7A6AA58D -:106AC00069526994696A6A676952697F6967694C42 -:106AD00069F4687668B268EE68F56700681268F570 -:106AE000679D67A867B4679D6700000100F010E02C -:106AF00020D0302768F266C36723671267C8040096 -:106B00000056578B76048A4459988946FC6A098B4B -:106B100046FC05840150E8930859598BF88BC7252A -:106B200000F03D001075558BC725F0003DF0007555 -:106B30004B8BC725000FC1F8088946FE8B44043BE8 -:106B400046FE7D0533C0E9EF008BC7250F00BA0F65 -:106B5000002BD03B56FE740533C0E9DB00C744026E -:106B600004098A46FE88445F88445D8B5EFCD1E35D -:106B7000C787FC080409B8F010E9BC008BC72500E2 -:106B8000F03D002075528BC725F0003DE0007548B0 -:106B90008BC725000FC1F8088946FE837EFE087E5C -:106BA0000533C0E992008BC7250F00BA0F002BD028 -:106BB0003B56FE740533C0EB7F90C744020C098A34 -:106BC00046FE88445E88445D8B5EFCD1E3C787FC4B -:106BD000080C09B8E020EB608BC72500F03D0030C1 -:106BE00075528BC725F0003DD00075488BC7250036 -:106BF0000FC1F8088946FE8B44043B46FE7D0433F2 -:106C0000C0EB358BC7250F00BA0F002BD03B56FECB -:106C1000740433C0EB22C7440214098A46FE884438 -:106C20006088445D8B5EFCD1E3C787FC081409B81B -:106C3000D030EB0433C0EB005F5EC9C3C806000070 -:106C4000568B76046A0856E8350459598A44580424 -:106C5000805056E8290459598B44543B4456750AD0 -:106C60008A445D3A442F7502EB648B445489445640 -:106C70008B5C028A470188442F8A445DB400C1E0DE -:106C8000088B54540BD08A445DB400BB0F002BD842 -:106C90000BD38956FE6A108A445998050400990559 -:106CA000400183D2005250E8540883C4068956FC40 -:106CB0008946FA8B46FE0946FA834EFC006A19FFA4 -:106CC00076FCFF76FAE8730783C406E8FE075EC920 -:106CD000C3C81C000056578B5E048A4759988BF036 -:106CE0008B5E048A475DB4008946E6837EE6007DBC -:106CF0000A8B5E048B4704488946E68B5E048B470B -:106D0000043B46E67F05C746E600008B5E048A46E4 -:106D1000E688475D8BDED1E38B9F5902C647022090 -:106D20008BDED1E38B9F5902C64703308BDED1E364 -:106D30008B9F6102C64702208BDED1E38B9F6102ED -:106D4000C64703308B46E68946FA837EFA007418FC -:106D50008B46FABB0A0033D2F7F380C2308BDED108 -:106D6000E38B9F5902885703BB0A008B46FA33D244 -:106D7000F7F38946FA837EFA0074188B46FABB0A49 -:106D80000033D2F7F380C2308BDED1E38B9F590200 -:106D90008857028B46E68946FA837EFA0074188B80 -:106DA00046FABB0A0033D2F7F380C2308BDED1E360 -:106DB0008B9F6102885703BB0A008B46FA33D2F7D8 -:106DC000F38946FA837EFA0074188B46FABB0A00F0 -:106DD00033D2F7F380C2308BDED1E38B9F61028820 -:106DE00057028B5EE6D1E3FFB712026A00FF76041A -:106DF000E8D1F683C40668D30F6A01FF7604E8C3BE -:106E0000F683C406FF76E656E8019359598956F28F -:106E10008946F0FF76E656E8149359598956EE896B -:106E200046EC9CFAC45EF0268B078946EAC45EEC09 -:106E3000268B078946E8BA50FFED8946FE9DC74676 -:106E4000E40100E8EEA0BA50FFED8946FC8B46FC59 -:106E50002B46FE3DE8037303E980019CFABA50FF1C -:106E6000ED8946FC8B46FC2B46FE8946F8C45EF055 -:106E7000268B072B46EA8946F6C45EF0268B0789E7 -:106E800046EAC45EEC268B072B46E88946F4C45ECE -:106E9000EC268B078946E8BA50FFED8946FE9D81B6 -:106EA0007EF8E803761CFF76F8FF76F6E87601595F -:106EB000598946F6FF76F8FF76F4E8680159598952 -:106EC00046F4BF0E00EB178BDED1E38B9F5902C651 -:106ED00001208BDED1E38B9F6102C601204783FF37 -:106EE0001176E48BDED1E38B9F5902C6470D308BC0 -:106EF000DED1E38B9F6102C6470D30837EF60977B2 -:106F000005B80D00EB26837EF6637705B80E00EB1F -:106F10001B817EF6E7037705B80F00EB0F817EF645 -:106F20000F277705B81000EB03B811008BF8EB259D -:106F30008B46F6BB0A0033D2F7F380C2308BDED12A -:106F4000E38B9F590288114FBB0A008B46F633D260 -:106F5000F7F38946F6837EF60075D5837EF40977CC -:106F600005B80D00EB26837EF4637705B80E00EBC1 -:106F70001B817EF4E7037705B80F00EB0F817EF4E9 -:106F80000F277705B81000EB03B811008BF8EB253D -:106F90008B46F4BB0A0033D2F7F380C2308BDED1CC -:106FA000E38B9F610288114FBB0A008B46F433D2FA -:106FB000F7F38946F4837EF40075D58BDED1E3FFC9 -:106FC000B75902FF7604E86E0059598BDED1E3FF12 -:106FD000B76102FF7604E85E0059596A00FF760443 -:106FE000E831F359598BD883FB04771FD1E32EFF87 -:106FF000A71B70EB22C746E40000FF4EE6EB0CC770 -:1070000046E40000FF46E6EB02EB00837EE40074FA -:1070100003E92AFEE9D4FC5F5EC9C3F36FF56FFF95 -:107020006FF36F0970558BEC8B4604B9E803F7E1F9 -:107030008B4E06F7F15DC3558BEC568B7606EB0E47 -:107040008BDE468A0750FF7604E833005959803CAE -:107050000075EDEB005E5DC3558BEC568B7606EB51 -:10706000148BDE468A0750FF7604E8450059590B19 -:10707000C07402EB07803C0075E7EB005E5DC3C89F -:10708000020000568B76048A445A988946FE9CFA80 -:107090008A46FEBAFE00EEBA0200ECA80274069D13 -:1070A000E8919EEBE9BA00008A4606EE9DEB005E91 -:1070B000C9C3C8040000568B76048A445A9889468E -:1070C000FEE8E6A18946FCE8E0A12B46FC3DB80BB2 -:1070D0007605B80100EB239CFA8A46FEBAFE00EE64 -:1070E000BA0200ECA80274069DE8489EEBD9BA00EB -:1070F000008A4606EE9D33C0EB005EC9C3C804009B -:107100000056578B7604837E0600740756E8030109 -:1071100059EB0556E8A200598846FF807EFF0877A4 -:10712000068A46FFE98400807EFF0F7603EB7990A4 -:107130008A46FFB4002D0A008BD883FB047767D101 -:10714000E32EFFA7AF71B000EB6156E86B0059B4B6 -:1071500000250F008946FC56E85E0059B4008BF804 -:1071600056E8550059B400C1E0088BD703D08BFA1C -:107170008B5EFCD1E3897830EB2E56E83B005988D2 -:10718000445BEB2456E831005988445056E8290006 -:107190005988445156E821005988445256E819004C -:1071A00059884453EB02EB00E95BFF5F5EC9C346BD -:1071B00071A6714A717A718471C8040000568B7689 -:1071C000048A445A988946FE9CFA8A46FEBAFE0012 -:1071D000EEBA0200ECA80175069DE8579DEBE9BAEE -:1071E0000000EC8846FD9D8A46FDEB005EC9C3C8E1 -:1071F000020000568B76048A445A988946FE9CFA0F -:107200008A46FEBAFE00EEBA0200EC32E424019D8A -:107210005EC9C3C8060000568B76048A445A988912 -:1072200046FEE885A08946FAE87FA02B46FA3DB8DD -:107230000B7604B008EB249CFA8A46FEBAFE00EEF8 -:10724000BA0200ECA80175069DE8E89CEBDABA00EA -:1072500000EC8846FD9D8A46FDEB005EC9C3558B58 -:10726000EC568B56048A4606EE33F6EB035058462E -:1072700083FE147CF85E5DC3C8020000568B560482 -:10728000EC8846FF33F6EB0350584683FE147CF837 -:107290008A46FFEB005EC9C3C802000056578B76D2 -:1072A00004833EB00B00751FBA8801B000EEBA86A9 -:1072B00001B000EE6A096A00683001E87D0183C40C -:1072C00006C706B00B01006A098BC605800150E8AD -:1072D000DA0059598BF88BC7C1E80C250F00894695 -:1072E000FE8BC7C1E808250F008B56FE83F20C3BCE -:1072F000C275218BC7C1E804250F008B56FE83F2AF -:10730000063BC2750F8BC7250F008B56FE83F20913 -:107310003BC2740D6A0756E838005959C746FE0744 -:10732000008A46FE0480A233028BC6BA6200F7EAE6 -:107330008A56FE8BD888976C006832028BC6BA6278 -:1073400000F7EA05140050E80EFD5959EB005F5EA6 -:10735000C9C3C8020000568B760683E60F8BC6C1F0 -:10736000E00C8BD683F20CC1E2080BC28BD683F201 -:1073700006C1E2040BC28BD683F2090BC28946FE1A -:107380006A196A108B46049905400183D200525055 -:10739000E86B0183C4060B46FE83CA005250E89A8C -:1073A0000083C406E82501EB005EC9C3558BEC568B -:1073B0005733FF6A01688601E8A3FE5959B1102AC4 -:1073C0004E06D3660433F6EB2E817E0400807204F1 -:1073D000B001EB02B00050688801E881FE59596A9B -:1073E00003688601E877FE59596A01688601E86DED -:1073F000FE5959D16604463B76067CCD33F6EB2424 -:10740000D1E76A03688601E854FE59596A01688623 -:1074100001E84AFE5959688801E85CFE599825013F -:10742000000BF84683FE107CD76A00688601E82DC1 -:10743000FE59598BC7EB005F5E5DC3558BEC565709 -:107440008B7E086A01688601E813FE5959B820004E -:107450002BC750FF7606FF7604E8A20083C4068996 -:10746000560689460433F6EB47817E060080720C8F -:107470007506837E04007204B001EB02B000506810 -:107480008801E8D9FD59596A03688601E8CFFD599A -:10749000596A01688601E8C5FD59596A01FF7606F7 -:1074A000FF7604E8580083C40689560689460446D8 -:1074B0003BF77CB56A00688601E8A2FD59596A006D -:1074C000688601E898FD59595F5E5DC3558BEC569F -:1074D0006A01688601E886FD595933F6EB00688831 -:1074E00001E894FD59A80175088BC6463D64007CEF -:1074F000ED6A00688601E865FD59595E5DC3C80400 -:1075000000008B46048B56068B4E08E306D1E0D173 -:10751000D2E2FA8946FC8956FE8B56FE8B46FCEB7E -:1075200000C9C300000000000000000000000000CF -:1075300050726576696F7573204D656E7500426592 -:1075400067696E00000000000000000000000000FD -:10755000000000000000000000000000000000002B -:10756000000000000000000000000000000000001B -:10757000000000000000000000000000000000000B -:1075800000000000000000000000000000000000FB -:1075900000000000000000000000000000000000EB -:1075A00000000000000000000000000000000000DB -:1075B00000000000000000000000000000000000CB -:1075C00000000000000000000000000000000000BB -:1075D00000000000000000000000000000000000AB -:1075E000000000000000000000000000000000009B -:1075F000000000000000000000000000000000008B -:10760000000000000000000000000000000000007A -:10761000000000000000000000000000000000006A -:10762000000000000000000000000000000000005A -:10763000000000000000000000000000000000004A -:10764000000000000000000000000000000000003A -:10765000000000000000000000000000000000002A -:10766000000000000000000000000000000000001A -:10767000000000000000000000000000000000000A -:1076800000000000000000000000000000000000FA -:1076900000000000000000000000000000000000EA -:1076A00000000000000000000000000000000000DA -:1076B00000000000000000000000000000000000CA -:1076C000000000000000000000000000506F727415 -:1076D000203000506F7274203100506F727420326D -:1076E00000506F7274203300506F72742034005059 -:1076F0006F7274203500506F7274203600506F72B4 -:1077000074203700506F7274203800506F727420EC -:107710003900506F727420313000506F7274203114 -:107720003100506F727420313200506F727420310A -:107730003300506F727420313400506F72742031F6 -:1077400035009C01A301AA01B101B801BF01C60126 -:10775000CD01D401DB01E201EA01F201FA010202EA -:107760000A02080000078100038080809F919591A4 -:107770009F000381848E95848484840003828484A2 -:107780008484958E8400048800B20BC60BDA0BEE5D -:107790000B020C160C2A0C3E0C520C770C9C0CBEE7 -:1077A0000CE00C020D01802054657374205061734D -:1077B000736564201F20507265737320800200017E -:1077C00080204D697373696E67205278204461741C -:1077D000611F205072657373208002000180204277 -:1077E00061642052782044617461201F20507265CA -:1077F000737320800200018020586D7472204275DE -:1078000073791F20507265737320800200018020FD -:107810006E6F742063757272656E746C791F2020B0 -:10782000696D706C656D656E7465640200240D2F62 -:107830000D3A0D450D500D5B0D660D710D7C0D87DC -:107840000D920D9D0DA80DB30DBE0DC90D53802CCD -:107850003254442053862C334454522053822C33C8 -:10786000525453201F53812C3252442053852C32C2 -:1078700043442053832C334354532053842C3344A8 -:1078800053522053872C3252492702000180202076 -:10789000444344202D2070696E2032301F275385C9 -:1078A0002E31818263908081828384858687888956 -:1078B0008A8B8C8D8E8F27020001802020445352AA -:1078C000202D2070696E2031311F2753842E318185 -:1078D000826390808182838485868788898A8B8C65 -:1078E0008D8E8F27020001802020435453202D20AD -:1078F00070696E20341F2753832E318182639080FC -:107900008182838485868788898A8B8C8D8E8F2758 -:107910000200018020205249202D2070696E203203 -:10792000321F2753872E3181826390808182838426 -:1079300085868788898A8B8C8D8E8F2702000180AF -:107940002020445452202D2070696E20362F381F7D -:107950002753862E3181826390808182838485863D -:107960008788898A8B8C8D8E8F270200018020204A -:10797000525453202D2070696E20351F2753822EBC -:107980003181826390808182838485868788898A19 -:107990008B8C8D8E8F27020001802020527844200E -:1079A0002D2070696E20321F2753812E30534D8158 -:1079B000826390808182838485868788898A8B8C84 -:1079C0008D8E8F27020001802020547844202D20A6 -:1079D00070696E20331F2753802E30534D81826390 -:1079E00090808182838485868788898A8B8C8D8E1E -:1079F0008F27020001802020444344202D207069FD -:107A00006E20351F2753852E3181826390808182BD -:107A1000838485868788898A8B8C8D8E8F27020048 -:107A200001802020445352202D2070696E20351F84 -:107A30002753842E3181826390808182838485865E -:107A40008788898A8B8C8D8E8F2702000180202069 -:107A5000435453202D2070696E20311F2753832EED -:107A60003181826390808182838485868788898A38 -:107A70008B8C8D8E8F270200018020205249202D73 -:107A800020286E2E632E291F2753872E3181826373 -:107A900090808182838485868788898A8B8C8D8E6D -:107AA0008F27020001802020445452202D2070692D -:107AB0006E20321F2753862E31818263908081820F -:107AC000838485868788898A8B8C8D8E8F27020098 -:107AD00001802020525453202D2070696E20371FC2 -:107AE0002753822E318182639080818283848586B0 -:107AF0008788898A8B8C8D8E8F27020001802020B9 -:107B0000527844202D2070696E20361F2753812E15 -:107B100030534D81826390808182838485868788FB -:107B2000898A8B8C8D8E8F270200018020205478CB -:107B300044202D2070696E20331F2753802E305330 -:107B40004D81826390808182838485868788898A3B -:107B50008B8C8D8E8F27020001802020444344208F -:107B60002D2070696E20351F202020202753852E60 -:107B700031818263888081828384858687270200A1 -:107B800001802020445352202D2070696E20351F23 -:107B9000202020202753842E318182638880818297 -:107BA0008384858687270200018020204354532048 -:107BB0002D2070696E20311F202020202753832E16 -:107BC0003181826388808182838485868727020051 -:107BD000018020205249202D20286E2E632E291F3F -:107BE000202020202753872E318182638880818244 -:107BF00083848586872702000180202044545220F8 -:107C00002D2070696E20321F202020202753862EC1 -:107C10003181826388808182838485868727020000 -:107C200001802020525453202D2070696E20371F70 -:107C3000202020202753822E3181826388808182F8 -:107C40008384858687270200018020205278442083 -:107C50002D2070696E20361F202020202753812E72 -:107C600030534D8182638880818283848586872713 -:107C7000020001802020547844202D2070696E205D -:107C8000331F202020202753802E30534D818263C4 -:107C90008880818283848586872702000180202056 -:107CA000444344202D2070696E2032301F20202054 -:107CB000202753852E318182638880818283848549 -:107CC000868727020001802020445352202D2070F7 -:107CD000696E2031311F202020202753842E3181CE -:107CE0008263888081828384858687270200018061 -:107CF0002020435453202D2070696E20341F2020F3 -:107D000020202753832E318182638880818283845F -:107D1000858687270200018020205249202D20706F -:107D2000696E2032321F202020202753872E318178 -:107D30008263888081828384858687270200018010 -:107D40002020445452202D2070696E20362F381F79 -:107D5000202020202753862E3181826388808182D3 -:107D60008384858687270200018020205254532077 -:107D70002D2070696E20351F202020202753822E51 -:107D8000318182638880818283848586872702008F -:107D900001802020527844202D2070696E20321FEF -:107DA000202020202753812E30534D8182638880EC -:107DB0008182838485868727020001802020547871 -:107DC00044202D2070696E20331F2020202027534F -:107DD000802E30534D8182638880818283848586A2 -:107DE0008727020068049604B6033C040E04890346 -:107DF0005C03E20360088A08BE0738080E0895078E -:107E00006C07E6071C057405FA05C404F004CC05EC -:107E1000A00548057806C806420728065006180738 -:107E2000F006A0060000F408F408D40D04090409C3 -:107E30000409040942000C091C09E50D020014099B -:107E40000409F40D43001C090C09050E0004040983 -:107E50001409120E2C092C092C092C0900003C09CC -:107E60006C091E0E740974097409740900014C0927 -:107E70002C092D0E740974097409740900025C0937 -:107E80003C093D0E740974097409740900036C09F6 -:107E90004C094D0E7409740974097409FF002C090A -:107EA0005C09000000058409EC095E0EF409F40980 -:107EB000F409F409000694097409680EAC0AAC0AC6 -:107EC000AC0AAC0A0007A4098409720EBC0ABC0AF9 -:107ED000BC0ABC0A0008B40994097C0ED40AD40A6E -:107EE000D40AD40A000BC409A409830EFC0AFC0AB4 -:107EF000FC0AFC0A000CD409B409900E140B140BF4 -:107F0000140B140B0002E409C409A00E2C0B2C0B5B -:107F10002C0B2C0B0400EC09D4090E00FF00740993 -:107F2000E40900008201FC09A40AAC0E8202040AE2 -:107F3000F409AF0E82030C0AFC09B20E8204140A83 -:107F4000040AB60E82051C0A0C0ABC0E8206240A1C -:107F5000140AC00E82072C0A1C0AC40E8208340AB6 -:107F6000240AC80E82093C0A2C0ACC0E820A440A52 -:107F7000340AD10E82104C0A3C0AD60E820B540AE7 -:107F8000440ADB0E82115C0A4C0AE00E820C640A81 -:107F9000540AE50E82126C0A5C0AEA0E820D740A1B -:107FA000640AEF0E820E7C0A6C0AF40E820F840AB9 -:107FB000740AFB0E82138C0A7C0A020F8214940A44 -:107FC000840A090F82159C0A8C0A100F8216A40AD3 -:107FD000940A170F8217F4099C0A1E0F8202B40A32 -:107FE000B40A260F8203AC0AAC0A2D0F8200C40A21 -:107FF000CC0A340F8201CC0ABC0A3F0F8202BC0AB1 -:10800000C40A4D0F8200DC0AF40A590F8201E40A07 -:10801000D40A630F8202EC0ADC0A6E0F8203F40AB0 -:10802000E40A7A0F8204D40AEC0A870F8200040B58 -:108030000C0B930F82010C0BFC0A9B0F8202FC0AB3 -:10804000040BA70F82001C0B240BB00F8201240B22 -:10805000140BB50F8202140B1C0BBE0F4400340B23 -:10806000A40B9C0144013C0B2C0BA3014402440BC8 -:10807000340BAA0144034C0B3C0BB1014404540BD8 -:10808000440BB80144055C0B4C0BBF014406640B68 -:10809000540BC60144076C0B5C0BCD014408740BF8 -:1080A000640BD40144097C0B6C0BDB01440A840B88 -:1080B000740BE201440B8C0B7C0BEA01440C940B17 -:1080C000840BF201440D9C0B8C0BFA01440EA40BA3 -:1080D000940B0202440F2C0B9C0B0A02171F0F2F4C -:1080E0000000018078783A20747820637073202A29 -:1080F0002A2A2A2A0200018078783A20747820639C -:108100007073202A2A2A2A2A0200018078783A20CD -:10811000747820637073202A2A2A2A2A0200018098 -:1081200078783A20747820637073202A2A2A2A2AC1 -:10813000020001C078783A20726320637073202AAD -:108140002A2A2A2A020001C078783A207263206322 -:108150007073202A2A2A2A2A020001C078783A203D -:10816000726320637073202A2A2A2A2A020001C01F -:1081700078783A20726320637073202A2A2A2A2A88 -:1081800002000180496E7374616C6C204C6F6F70DB -:108190006261636B1F5072657373208020746F205F -:1081A000737461727402000180204361626C652007 -:1081B000746F2052656D6F74651F50726573732004 -:1081C0008020746F20737461727402000180204CEF -:1081D0006F63616C204C6F6F706261636B201F2056 -:1081E0002052756E6E696E67202E2E2E0200018061 -:1081F00052656D6F7465204C6F6F706261636B20A8 -:108200001F202052756E6E696E67202E2E2E020082 -:10821000018020496E74726E6C204C6F6F706261C9 -:10822000636B1F202052756E6E696E67202E2E2E96 -:10823000020001805472616E736D69742050617424 -:108240007465726E1F202052756E6E696E67202EE7 -:108250002E2E020001802020303A2027438000018A -:10826000802020313A202743810001802020323AAB -:10827000202743820001802020333A2027438300B7 -:1082800001802020343A20274384000180202035BB -:108290003A202743850001802020363A2027438654 -:1082A0000001802020373A202743870001802020CA -:1082B000383A202743880001802020393A2027437C -:1082C000890001802031303A2027438A0001802034 -:1082D00031313A2027438B0001802031323A202768 -:1082E000438C0001802031333A2027438D000180E8 -:1082F0002031343A2027438E0001802031353A2046 -:1083000027438F002A2A204D61696E20204D656E1B -:1083100075202A2A004D6F6E69746F72206120509B -:108320006F7274004D6F6E69746F722061205369B3 -:10833000676E616C00457374696D617465204350AC -:108340005300446961676E6F7374696373004C6FA7 -:1083500063616C204C6F6F706261636B0052656D7E -:108360006F7465204C6F6F706261636B00496E744F -:10837000726E6C204C6F6F706261636B005472613F -:108380006E736D6974205061747465726E00426121 -:10839000756420526174650044617461204269749F -:1083A000730053746F702042697473005061726976 -:1083B00074790044617461205061747465726E0058 -:1083C000547820466C6F7720436F6E74726F6C0028 -:1083D000506F7274204E756D6265720035300037D3 -:1083E0003500313130003133342E35003135300035 -:1083F00032303000333030003630300031323030FF -:10840000003138303000323030300032343030001B -:1084100033363030003438303000373230300039C5 -:108420003630300031392C3230300033382C343093 -:10843000300035362C3030300035372C36303000B7 -:1084400036342C3030300037362C38303000313173 -:10845000352C323030003720626974730038206266 -:1084600069747300312073746F7020626974003115 -:108470002E352073746F702062697473003220731C -:10848000746F702062697473006E6F20706172691E -:108490007479006F64642070617269747900657624 -:1084A000656E207061726974790073706163652014 -:1084B000706172697479006D61726B2070617269AC -:1084C000747900436F6C756D6E7300426172626502 -:1084D0007220506F6C650055555555552E2E2E0047 -:1084E0004E6F6E6500586F6E2F586F66660043546E -:1084F00053005072657373208020666F72206D6523 -:108500006E750028636F756E74696E672E2E2E2946 -:108510000000654E64204F6620436F4465000000F4 -:10852000000000000000000000000000000000004B -:10853000000000000000000000000000000000003B -:10854000000000000000000000000000000000002B -:10855000000000000000000000000000000000001B -:10856000000000000000000000000000000000000B -:1085700000000000000000000000000000000000FB -:1085800000000000000000000000000000000000EB -:1085900000000000000000000000000000000000DB -:1085A00000000000000000000000000000000000CB -:1085B00000000000000000000000000000000000BB -:1085C00000000000000000000000000000000000AB -:1085D000000000000000000000000000000000009B -:1085E000000000000000000000000000000000008B -:1085F000000000000000000000000000000000007B -:00000001FF -/* Intelliport II loadware */ -/* -31232 bytes read from ff.lod */ diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 074923ce593d..f0cf934ba877 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -1576,9 +1576,14 @@ cifs_readv_callback(struct mid_q_entry *mid) /* result already set, check signature */ if (server->sec_mode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) { - if (cifs_verify_signature(rdata->iov, rdata->nr_iov, - server, mid->sequence_number + 1)) - cERROR(1, "Unexpected SMB signature"); + int rc = 0; + + rc = cifs_verify_signature(rdata->iov, rdata->nr_iov, + server, + mid->sequence_number + 1); + if (rc) + cERROR(1, "SMB signature verification returned " + "error = %d", rc); } /* FIXME: should this be counted toward the initiating task? */ task_io_account_read(rdata->bytes); diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index cbe709ad6663..781025be48bc 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -356,19 +356,12 @@ cifs_create_get_file_info: cifs_create_set_dentry: if (rc != 0) { cFYI(1, "Create worked, get_inode_info failed rc = %d", rc); + CIFSSMBClose(xid, tcon, *fileHandle); goto out; } d_drop(direntry); d_add(direntry, newinode); - /* ENOENT for create? How weird... */ - rc = -ENOENT; - if (!newinode) { - CIFSSMBClose(xid, tcon, *fileHandle); - goto out; - } - rc = 0; - out: kfree(buf); kfree(full_path); diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 7354877fa3bd..cb79c7edecb0 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -124,10 +124,10 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr) { struct cifsInodeInfo *cifs_i = CIFS_I(inode); struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); - unsigned long oldtime = cifs_i->time; cifs_revalidate_cache(inode, fattr); + spin_lock(&inode->i_lock); inode->i_atime = fattr->cf_atime; inode->i_mtime = fattr->cf_mtime; inode->i_ctime = fattr->cf_ctime; @@ -148,9 +148,6 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr) else cifs_i->time = jiffies; - cFYI(1, "inode 0x%p old_time=%ld new_time=%ld", inode, - oldtime, cifs_i->time); - cifs_i->delete_pending = fattr->cf_flags & CIFS_FATTR_DELETE_PENDING; cifs_i->server_eof = fattr->cf_eof; @@ -158,7 +155,6 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr) * Can't safely change the file size here if the client is writing to * it due to potential races. */ - spin_lock(&inode->i_lock); if (is_size_safe_to_change(cifs_i, fattr->cf_eof)) { i_size_write(inode, fattr->cf_eof); @@ -859,12 +855,14 @@ struct inode *cifs_root_iget(struct super_block *sb) if (rc && tcon->ipc) { cFYI(1, "ipc connection - fake read inode"); + spin_lock(&inode->i_lock); inode->i_mode |= S_IFDIR; set_nlink(inode, 2); inode->i_op = &cifs_ipc_inode_ops; inode->i_fop = &simple_dir_operations; inode->i_uid = cifs_sb->mnt_uid; inode->i_gid = cifs_sb->mnt_gid; + spin_unlock(&inode->i_lock); } else if (rc) { iget_failed(inode); inode = ERR_PTR(rc); @@ -1110,6 +1108,15 @@ undo_setattr: goto out_close; } +/* copied from fs/nfs/dir.c with small changes */ +static void +cifs_drop_nlink(struct inode *inode) +{ + spin_lock(&inode->i_lock); + if (inode->i_nlink > 0) + drop_nlink(inode); + spin_unlock(&inode->i_lock); +} /* * If dentry->d_inode is null (usually meaning the cached dentry @@ -1166,13 +1173,13 @@ retry_std_delete: psx_del_no_retry: if (!rc) { if (inode) - drop_nlink(inode); + cifs_drop_nlink(inode); } else if (rc == -ENOENT) { d_drop(dentry); } else if (rc == -ETXTBSY) { rc = cifs_rename_pending_delete(full_path, dentry, xid); if (rc == 0) - drop_nlink(inode); + cifs_drop_nlink(inode); } else if ((rc == -EACCES) && (dosattr == 0) && inode) { attrs = kzalloc(sizeof(*attrs), GFP_KERNEL); if (attrs == NULL) { @@ -1241,9 +1248,10 @@ cifs_mkdir_qinfo(struct inode *inode, struct dentry *dentry, umode_t mode, * setting nlink not necessary except in cases where we failed to get it * from the server or was set bogus */ + spin_lock(&dentry->d_inode->i_lock); if ((dentry->d_inode) && (dentry->d_inode->i_nlink < 2)) set_nlink(dentry->d_inode, 2); - + spin_unlock(&dentry->d_inode->i_lock); mode &= ~current_umask(); /* must turn on setgid bit if parent dir has it */ if (inode->i_mode & S_ISGID) diff --git a/fs/cifs/link.c b/fs/cifs/link.c index 09e4b3ae4564..e6ce3b112875 100644 --- a/fs/cifs/link.c +++ b/fs/cifs/link.c @@ -433,7 +433,9 @@ cifs_hardlink(struct dentry *old_file, struct inode *inode, if (old_file->d_inode) { cifsInode = CIFS_I(old_file->d_inode); if (rc == 0) { + spin_lock(&old_file->d_inode->i_lock); inc_nlink(old_file->d_inode); + spin_unlock(&old_file->d_inode->i_lock); /* BB should we make this contingent on superblock flag NOATIME? */ /* old_file->d_inode->i_ctime = CURRENT_TIME;*/ /* parent dir timestamps will update from srv diff --git a/fs/cifs/smb2misc.c b/fs/cifs/smb2misc.c index a4ff5d547554..e4d3b9964167 100644 --- a/fs/cifs/smb2misc.c +++ b/fs/cifs/smb2misc.c @@ -52,7 +52,8 @@ check_smb2_hdr(struct smb2_hdr *hdr, __u64 mid) cERROR(1, "Bad protocol string signature header %x", *(unsigned int *) hdr->ProtocolId); if (mid != hdr->MessageId) - cERROR(1, "Mids do not match"); + cERROR(1, "Mids do not match: %llu and %llu", mid, + hdr->MessageId); } cERROR(1, "Bad SMB detected. The Mid=%llu", hdr->MessageId); return 1; @@ -107,7 +108,7 @@ smb2_check_message(char *buf, unsigned int length) * ie Validate the wct via smb2_struct_sizes table above */ - if (length < 2 + sizeof(struct smb2_hdr)) { + if (length < sizeof(struct smb2_pdu)) { if ((length >= sizeof(struct smb2_hdr)) && (hdr->Status != 0)) { pdu->StructureSize2 = 0; /* @@ -121,15 +122,15 @@ smb2_check_message(char *buf, unsigned int length) return 1; } if (len > CIFSMaxBufSize + MAX_SMB2_HDR_SIZE - 4) { - cERROR(1, "SMB length greater than maximum, mid=%lld", mid); + cERROR(1, "SMB length greater than maximum, mid=%llu", mid); return 1; } if (check_smb2_hdr(hdr, mid)) return 1; - if (hdr->StructureSize != SMB2_HEADER_SIZE) { - cERROR(1, "Illegal structure size %d", + if (hdr->StructureSize != SMB2_HEADER_STRUCTURE_SIZE) { + cERROR(1, "Illegal structure size %u", le16_to_cpu(hdr->StructureSize)); return 1; } @@ -161,8 +162,9 @@ smb2_check_message(char *buf, unsigned int length) if (4 + len != clc_len) { cFYI(1, "Calculated size %u length %u mismatch mid %llu", clc_len, 4 + len, mid); - if (clc_len == 4 + len + 1) /* BB FIXME (fix samba) */ - return 0; /* BB workaround Samba 3 bug SessSetup rsp */ + /* server can return one byte more */ + if (clc_len == 4 + len + 1) + return 0; return 1; } return 0; diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h index f37a1b41b402..c5fbfac5d576 100644 --- a/fs/cifs/smb2pdu.h +++ b/fs/cifs/smb2pdu.h @@ -87,10 +87,6 @@ #define SMB2_PROTO_NUMBER __constant_cpu_to_le32(0x424d53fe) -#define SMB2_HEADER_SIZE __constant_le16_to_cpu(64) - -#define SMB2_ERROR_STRUCTURE_SIZE2 __constant_le16_to_cpu(9) - /* * SMB2 Header Definition * @@ -99,6 +95,9 @@ * "PDU" : "Protocol Data Unit" (ie a network "frame") * */ + +#define SMB2_HEADER_STRUCTURE_SIZE __constant_le16_to_cpu(64) + struct smb2_hdr { __be32 smb2_buf_length; /* big endian on wire */ /* length is only two or three bytes - with @@ -140,6 +139,9 @@ struct smb2_pdu { * command code name for the struct. Note that structures must be packed. * */ + +#define SMB2_ERROR_STRUCTURE_SIZE2 __constant_le16_to_cpu(9) + struct smb2_err_rsp { struct smb2_hdr hdr; __le16 StructureSize; diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 83867ef348df..d9b639b95fa8 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -503,13 +503,16 @@ cifs_check_receive(struct mid_q_entry *mid, struct TCP_Server_Info *server, /* convert the length into a more usable form */ if (server->sec_mode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) { struct kvec iov; + int rc = 0; iov.iov_base = mid->resp_buf; iov.iov_len = len; /* FIXME: add code to kill session */ - if (cifs_verify_signature(&iov, 1, server, - mid->sequence_number + 1) != 0) - cERROR(1, "Unexpected SMB signature"); + rc = cifs_verify_signature(&iov, 1, server, + mid->sequence_number + 1); + if (rc) + cERROR(1, "SMB signature verification returned error = " + "%d", rc); } /* BB special case reconnect tid and uid here? */ diff --git a/include/linux/Kbuild b/include/linux/Kbuild index fa217607c582..c57e064666e4 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -84,7 +84,6 @@ header-y += capability.h header-y += capi.h header-y += cciss_defs.h header-y += cciss_ioctl.h -header-y += cdk.h header-y += cdrom.h header-y += cgroupstats.h header-y += chio.h @@ -93,7 +92,6 @@ header-y += cn_proc.h header-y += coda.h header-y += coda_psdev.h header-y += coff.h -header-y += comstats.h header-y += connector.h header-y += const.h header-y += cramfs_fs.h @@ -140,7 +138,6 @@ header-y += fuse.h header-y += futex.h header-y += gameport.h header-y += gen_stats.h -header-y += generic_serial.h header-y += genetlink.h header-y += gfs2_ondisk.h header-y += gigaset_dev.h @@ -372,6 +369,7 @@ header-y += tipc.h header-y += tipc_config.h header-y += toshiba.h header-y += tty.h +header-y += tty_flags.h header-y += types.h header-y += udf_fs_i.h header-y += udp.h diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index d117b29d1062..f612c783170f 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -205,7 +205,6 @@ struct amba_pl011_data { void *dma_tx_param; void (*init) (void); void (*exit) (void); - void (*reset) (void); }; #endif diff --git a/include/linux/cd1400.h b/include/linux/cd1400.h deleted file mode 100644 index 1dc3ab0523fd..000000000000 --- a/include/linux/cd1400.h +++ /dev/null @@ -1,292 +0,0 @@ -/*****************************************************************************/ - -/* - * cd1400.h -- cd1400 UART hardware info. - * - * Copyright (C) 1996-1998 Stallion Technologies - * Copyright (C) 1994-1996 Greg Ungerer. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/*****************************************************************************/ -#ifndef _CD1400_H -#define _CD1400_H -/*****************************************************************************/ - -/* - * Define the number of async ports per cd1400 uart chip. - */ -#define CD1400_PORTS 4 - -/* - * Define the cd1400 uarts internal FIFO sizes. - */ -#define CD1400_TXFIFOSIZE 12 -#define CD1400_RXFIFOSIZE 12 - -/* - * Local RX FIFO thresh hold level. Also define the RTS thresh hold - * based on the RX thresh hold. - */ -#define FIFO_RXTHRESHOLD 6 -#define FIFO_RTSTHRESHOLD 7 - -/*****************************************************************************/ - -/* - * Define the cd1400 register addresses. These are all the valid - * registers with the cd1400. Some are global, some virtual, some - * per port. - */ -#define GFRCR 0x40 -#define CAR 0x68 -#define GCR 0x4b -#define SVRR 0x67 -#define RICR 0x44 -#define TICR 0x45 -#define MICR 0x46 -#define RIR 0x6b -#define TIR 0x6a -#define MIR 0x69 -#define PPR 0x7e - -#define RIVR 0x43 -#define TIVR 0x42 -#define MIVR 0x41 -#define TDR 0x63 -#define RDSR 0x62 -#define MISR 0x4c -#define EOSRR 0x60 - -#define LIVR 0x18 -#define CCR 0x05 -#define SRER 0x06 -#define COR1 0x08 -#define COR2 0x09 -#define COR3 0x0a -#define COR4 0x1e -#define COR5 0x1f -#define CCSR 0x0b -#define RDCR 0x0e -#define SCHR1 0x1a -#define SCHR2 0x1b -#define SCHR3 0x1c -#define SCHR4 0x1d -#define SCRL 0x22 -#define SCRH 0x23 -#define LNC 0x24 -#define MCOR1 0x15 -#define MCOR2 0x16 -#define RTPR 0x21 -#define MSVR1 0x6c -#define MSVR2 0x6d -#define PSVR 0x6f -#define RBPR 0x78 -#define RCOR 0x7c -#define TBPR 0x72 -#define TCOR 0x76 - -/*****************************************************************************/ - -/* - * Define the set of baud rate clock divisors. - */ -#define CD1400_CLK0 8 -#define CD1400_CLK1 32 -#define CD1400_CLK2 128 -#define CD1400_CLK3 512 -#define CD1400_CLK4 2048 - -#define CD1400_NUMCLKS 5 - -/*****************************************************************************/ - -/* - * Define the clock pre-scalar value to be a 5 ms clock. This should be - * OK for now. It would probably be better to make it 10 ms, but we - * can't fit that divisor into 8 bits! - */ -#define PPR_SCALAR 244 - -/*****************************************************************************/ - -/* - * Define values used to set character size options. - */ -#define COR1_CHL5 0x00 -#define COR1_CHL6 0x01 -#define COR1_CHL7 0x02 -#define COR1_CHL8 0x03 - -/* - * Define values used to set the number of stop bits. - */ -#define COR1_STOP1 0x00 -#define COR1_STOP15 0x04 -#define COR1_STOP2 0x08 - -/* - * Define values used to set the parity scheme in use. - */ -#define COR1_PARNONE 0x00 -#define COR1_PARFORCE 0x20 -#define COR1_PARENB 0x40 -#define COR1_PARIGNORE 0x10 - -#define COR1_PARODD 0x80 -#define COR1_PAREVEN 0x00 - -#define COR2_IXM 0x80 -#define COR2_TXIBE 0x40 -#define COR2_ETC 0x20 -#define COR2_LLM 0x10 -#define COR2_RLM 0x08 -#define COR2_RTSAO 0x04 -#define COR2_CTSAE 0x02 - -#define COR3_SCDRNG 0x80 -#define COR3_SCD34 0x40 -#define COR3_FCT 0x20 -#define COR3_SCD12 0x10 - -/* - * Define values used by COR4. - */ -#define COR4_BRKINT 0x08 -#define COR4_IGNBRK 0x18 - -/*****************************************************************************/ - -/* - * Define the modem control register values. - * Note that the actual hardware is a little different to the conventional - * pin names on the cd1400. - */ -#define MSVR1_DTR 0x01 -#define MSVR1_DSR 0x10 -#define MSVR1_RI 0x20 -#define MSVR1_CTS 0x40 -#define MSVR1_DCD 0x80 - -#define MSVR2_RTS 0x02 -#define MSVR2_DSR 0x10 -#define MSVR2_RI 0x20 -#define MSVR2_CTS 0x40 -#define MSVR2_DCD 0x80 - -#define MCOR1_DCD 0x80 -#define MCOR1_CTS 0x40 -#define MCOR1_RI 0x20 -#define MCOR1_DSR 0x10 - -#define MCOR2_DCD 0x80 -#define MCOR2_CTS 0x40 -#define MCOR2_RI 0x20 -#define MCOR2_DSR 0x10 - -/*****************************************************************************/ - -/* - * Define the bits used with the service (interrupt) enable register. - */ -#define SRER_NNDT 0x01 -#define SRER_TXEMPTY 0x02 -#define SRER_TXDATA 0x04 -#define SRER_RXDATA 0x10 -#define SRER_MODEM 0x80 - -/*****************************************************************************/ - -/* - * Define operational commands for the command register. - */ -#define CCR_RESET 0x80 -#define CCR_CORCHANGE 0x4e -#define CCR_SENDCH 0x20 -#define CCR_CHANCTRL 0x10 - -#define CCR_TXENABLE (CCR_CHANCTRL | 0x08) -#define CCR_TXDISABLE (CCR_CHANCTRL | 0x04) -#define CCR_RXENABLE (CCR_CHANCTRL | 0x02) -#define CCR_RXDISABLE (CCR_CHANCTRL | 0x01) - -#define CCR_SENDSCHR1 (CCR_SENDCH | 0x01) -#define CCR_SENDSCHR2 (CCR_SENDCH | 0x02) -#define CCR_SENDSCHR3 (CCR_SENDCH | 0x03) -#define CCR_SENDSCHR4 (CCR_SENDCH | 0x04) - -#define CCR_RESETCHAN (CCR_RESET | 0x00) -#define CCR_RESETFULL (CCR_RESET | 0x01) -#define CCR_TXFLUSHFIFO (CCR_RESET | 0x02) - -#define CCR_MAXWAIT 10000 - -/*****************************************************************************/ - -/* - * Define the valid acknowledgement types (for hw ack cycle). - */ -#define ACK_TYPMASK 0x07 -#define ACK_TYPTX 0x02 -#define ACK_TYPMDM 0x01 -#define ACK_TYPRXGOOD 0x03 -#define ACK_TYPRXBAD 0x07 - -#define SVRR_RX 0x01 -#define SVRR_TX 0x02 -#define SVRR_MDM 0x04 - -#define ST_OVERRUN 0x01 -#define ST_FRAMING 0x02 -#define ST_PARITY 0x04 -#define ST_BREAK 0x08 -#define ST_SCHAR1 0x10 -#define ST_SCHAR2 0x20 -#define ST_SCHAR3 0x30 -#define ST_SCHAR4 0x40 -#define ST_RANGE 0x70 -#define ST_SCHARMASK 0x70 -#define ST_TIMEOUT 0x80 - -#define MISR_DCD 0x80 -#define MISR_CTS 0x40 -#define MISR_RI 0x20 -#define MISR_DSR 0x10 - -/*****************************************************************************/ - -/* - * Defines for the CCSR status register. - */ -#define CCSR_RXENABLED 0x80 -#define CCSR_RXFLOWON 0x40 -#define CCSR_RXFLOWOFF 0x20 -#define CCSR_TXENABLED 0x08 -#define CCSR_TXFLOWON 0x04 -#define CCSR_TXFLOWOFF 0x02 - -/*****************************************************************************/ - -/* - * Define the embedded commands. - */ -#define ETC_CMD 0x00 -#define ETC_STARTBREAK 0x81 -#define ETC_DELAY 0x82 -#define ETC_STOPBREAK 0x83 - -/*****************************************************************************/ -#endif diff --git a/include/linux/cdk.h b/include/linux/cdk.h deleted file mode 100644 index 80093a8d4f64..000000000000 --- a/include/linux/cdk.h +++ /dev/null @@ -1,486 +0,0 @@ -/*****************************************************************************/ - -/* - * cdk.h -- CDK interface definitions. - * - * Copyright (C) 1996-1998 Stallion Technologies - * Copyright (C) 1994-1996 Greg Ungerer. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/*****************************************************************************/ -#ifndef _CDK_H -#define _CDK_H -/*****************************************************************************/ - -#pragma pack(2) - -/* - * The following set of definitions is used to communicate with the - * shared memory interface of the Stallion intelligent multiport serial - * boards. The definitions in this file are taken directly from the - * document titled "Generic Stackable Interface, Downloader and - * Communications Development Kit". - */ - -/* - * Define the set of important shared memory addresses. These are - * required to initialize the board and get things started. All of these - * addresses are relative to the start of the shared memory. - */ -#define CDK_SIGADDR 0x200 -#define CDK_FEATADDR 0x280 -#define CDK_CDKADDR 0x300 -#define CDK_RDYADDR 0x262 - -#define CDK_ALIVEMARKER 13 - -/* - * On hardware power up the ROMs located on the EasyConnection 8/64 will - * fill out the following signature information into shared memory. This - * way the host system can quickly determine that the board is present - * and is operational. - */ -typedef struct cdkecpsig { - unsigned long magic; - unsigned short romver; - unsigned short cputype; - unsigned char panelid[8]; -} cdkecpsig_t; - -#define ECP_MAGIC 0x21504345 - -/* - * On hardware power up the ROMs located on the ONboard, Stallion and - * Brumbys will fill out the following signature information into shared - * memory. This way the host system can quickly determine that the board - * is present and is operational. - */ -typedef struct cdkonbsig { - unsigned short magic0; - unsigned short magic1; - unsigned short magic2; - unsigned short magic3; - unsigned short romver; - unsigned short memoff; - unsigned short memseg; - unsigned short amask0; - unsigned short pic; - unsigned short status; - unsigned short btype; - unsigned short clkticks; - unsigned short clkspeed; - unsigned short amask1; - unsigned short amask2; -} cdkonbsig_t; - -#define ONB_MAGIC0 0xf2a7 -#define ONB_MAGIC1 0xa149 -#define ONB_MAGIC2 0x6352 -#define ONB_MAGIC3 0xf121 - -/* - * Define the feature area structure. The feature area is the set of - * startup parameters used by the slave image when it starts executing. - * They allow for the specification of buffer sizes, debug trace, etc. - */ -typedef struct cdkfeature { - unsigned long debug; - unsigned long banner; - unsigned long etype; - unsigned long nrdevs; - unsigned long brdspec; - unsigned long txrqsize; - unsigned long rxrqsize; - unsigned long flags; -} cdkfeature_t; - -#define ETYP_DDK 0 -#define ETYP_CDK 1 - -/* - * Define the CDK header structure. This is the info that the slave - * environment sets up after it has been downloaded and started. It - * essentially provides a memory map for the shared memory interface. - */ -typedef struct cdkhdr { - unsigned short command; - unsigned short status; - unsigned short port; - unsigned short mode; - unsigned long cmd_buf[14]; - unsigned short alive_cnt; - unsigned short intrpt_mode; - unsigned char intrpt_id[8]; - unsigned char ver_release; - unsigned char ver_modification; - unsigned char ver_fix; - unsigned char deadman_restart; - unsigned short deadman; - unsigned short nrdevs; - unsigned long memp; - unsigned long hostp; - unsigned long slavep; - unsigned char hostreq; - unsigned char slavereq; - unsigned char cmd_reserved[30]; -} cdkhdr_t; - -#define MODE_DDK 0 -#define MODE_CDK 1 - -#define IMD_INTR 0x0 -#define IMD_PPINTR 0x1 -#define IMD_POLL 0xff - -/* - * Define the memory mapping structure. This structure is pointed to by - * the memp field in the stlcdkhdr struct. As many as these structures - * as required are laid out in shared memory to define how the rest of - * shared memory is divided up. There will be one for each port. - */ -typedef struct cdkmem { - unsigned short dtype; - unsigned long offset; -} cdkmem_t; - -#define TYP_UNDEFINED 0x0 -#define TYP_ASYNCTRL 0x1 -#define TYP_ASYNC 0x20 -#define TYP_PARALLEL 0x40 -#define TYP_SYNCX21 0x60 - -/*****************************************************************************/ - -/* - * Following is a set of defines and structures used to actually deal - * with the serial ports on the board. Firstly is the set of commands - * that can be applied to ports. - */ -#define ASYCMD (((unsigned long) 'a') << 8) - -#define A_NULL (ASYCMD | 0) -#define A_FLUSH (ASYCMD | 1) -#define A_BREAK (ASYCMD | 2) -#define A_GETPORT (ASYCMD | 3) -#define A_SETPORT (ASYCMD | 4) -#define A_SETPORTF (ASYCMD | 5) -#define A_SETPORTFTX (ASYCMD | 6) -#define A_SETPORTFRX (ASYCMD | 7) -#define A_GETSIGNALS (ASYCMD | 8) -#define A_SETSIGNALS (ASYCMD | 9) -#define A_SETSIGNALSF (ASYCMD | 10) -#define A_SETSIGNALSFTX (ASYCMD | 11) -#define A_SETSIGNALSFRX (ASYCMD | 12) -#define A_GETNOTIFY (ASYCMD | 13) -#define A_SETNOTIFY (ASYCMD | 14) -#define A_NOTIFY (ASYCMD | 15) -#define A_PORTCTRL (ASYCMD | 16) -#define A_GETSTATS (ASYCMD | 17) -#define A_RQSTATE (ASYCMD | 18) -#define A_FLOWSTATE (ASYCMD | 19) -#define A_CLEARSTATS (ASYCMD | 20) - -/* - * Define those arguments used for simple commands. - */ -#define FLUSHRX 0x1 -#define FLUSHTX 0x2 - -#define BREAKON -1 -#define BREAKOFF -2 - -/* - * Define the port setting structure, and all those defines that go along - * with it. Basically this structure defines the characteristics of this - * port: baud rate, chars, parity, input/output char cooking etc. - */ -typedef struct asyport { - unsigned long baudout; - unsigned long baudin; - unsigned long iflag; - unsigned long oflag; - unsigned long lflag; - unsigned long pflag; - unsigned long flow; - unsigned long spare1; - unsigned short vtime; - unsigned short vmin; - unsigned short txlo; - unsigned short txhi; - unsigned short rxlo; - unsigned short rxhi; - unsigned short rxhog; - unsigned short spare2; - unsigned char csize; - unsigned char stopbs; - unsigned char parity; - unsigned char stopin; - unsigned char startin; - unsigned char stopout; - unsigned char startout; - unsigned char parmark; - unsigned char brkmark; - unsigned char cc[11]; -} asyport_t; - -#define PT_STOP1 0x0 -#define PT_STOP15 0x1 -#define PT_STOP2 0x2 - -#define PT_NOPARITY 0x0 -#define PT_ODDPARITY 0x1 -#define PT_EVENPARITY 0x2 -#define PT_MARKPARITY 0x3 -#define PT_SPACEPARITY 0x4 - -#define F_NONE 0x0 -#define F_IXON 0x1 -#define F_IXOFF 0x2 -#define F_IXANY 0x4 -#define F_IOXANY 0x8 -#define F_RTSFLOW 0x10 -#define F_CTSFLOW 0x20 -#define F_DTRFLOW 0x40 -#define F_DCDFLOW 0x80 -#define F_DSROFLOW 0x100 -#define F_DSRIFLOW 0x200 - -#define FI_NORX 0x1 -#define FI_RAW 0x2 -#define FI_ISTRIP 0x4 -#define FI_UCLC 0x8 -#define FI_INLCR 0x10 -#define FI_ICRNL 0x20 -#define FI_IGNCR 0x40 -#define FI_IGNBREAK 0x80 -#define FI_DSCRDBREAK 0x100 -#define FI_1MARKBREAK 0x200 -#define FI_2MARKBREAK 0x400 -#define FI_XCHNGBREAK 0x800 -#define FI_IGNRXERRS 0x1000 -#define FI_DSCDRXERRS 0x2000 -#define FI_1MARKRXERRS 0x4000 -#define FI_2MARKRXERRS 0x8000 -#define FI_XCHNGRXERRS 0x10000 -#define FI_DSCRDNULL 0x20000 - -#define FO_OLCUC 0x1 -#define FO_ONLCR 0x2 -#define FO_OOCRNL 0x4 -#define FO_ONOCR 0x8 -#define FO_ONLRET 0x10 -#define FO_ONL 0x20 -#define FO_OBS 0x40 -#define FO_OVT 0x80 -#define FO_OFF 0x100 -#define FO_OTAB1 0x200 -#define FO_OTAB2 0x400 -#define FO_OTAB3 0x800 -#define FO_OCR1 0x1000 -#define FO_OCR2 0x2000 -#define FO_OCR3 0x4000 -#define FO_OFILL 0x8000 -#define FO_ODELL 0x10000 - -#define P_RTSLOCK 0x1 -#define P_CTSLOCK 0x2 -#define P_MAPRTS 0x4 -#define P_MAPCTS 0x8 -#define P_LOOPBACK 0x10 -#define P_DTRFOLLOW 0x20 -#define P_FAKEDCD 0x40 - -#define P_RXIMIN 0x10000 -#define P_RXITIME 0x20000 -#define P_RXTHOLD 0x40000 - -/* - * Define a structure to communicate serial port signal and data state - * information. - */ -typedef struct asysigs { - unsigned long data; - unsigned long signal; - unsigned long sigvalue; -} asysigs_t; - -#define DT_TXBUSY 0x1 -#define DT_TXEMPTY 0x2 -#define DT_TXLOW 0x4 -#define DT_TXHIGH 0x8 -#define DT_TXFULL 0x10 -#define DT_TXHOG 0x20 -#define DT_TXFLOWED 0x40 -#define DT_TXBREAK 0x80 - -#define DT_RXBUSY 0x100 -#define DT_RXEMPTY 0x200 -#define DT_RXLOW 0x400 -#define DT_RXHIGH 0x800 -#define DT_RXFULL 0x1000 -#define DT_RXHOG 0x2000 -#define DT_RXFLOWED 0x4000 -#define DT_RXBREAK 0x8000 - -#define SG_DTR 0x1 -#define SG_DCD 0x2 -#define SG_RTS 0x4 -#define SG_CTS 0x8 -#define SG_DSR 0x10 -#define SG_RI 0x20 - -/* - * Define the notification setting structure. This is used to tell the - * port what events we want to be informed about. Fields here use the - * same defines as for the asysigs structure above. - */ -typedef struct asynotify { - unsigned long ctrl; - unsigned long data; - unsigned long signal; - unsigned long sigvalue; -} asynotify_t; - -/* - * Define the port control structure. It is used to do fine grain - * control operations on the port. - */ -typedef struct { - unsigned long rxctrl; - unsigned long txctrl; - char rximdch; - char tximdch; - char spare1; - char spare2; -} asyctrl_t; - -#define CT_ENABLE 0x1 -#define CT_DISABLE 0x2 -#define CT_STOP 0x4 -#define CT_START 0x8 -#define CT_STARTFLOW 0x10 -#define CT_STOPFLOW 0x20 -#define CT_SENDCHR 0x40 - -/* - * Define the stats structure kept for each port. This is a useful set - * of data collected for each port on the slave. The A_GETSTATS command - * is used to retrieve this data from the slave. - */ -typedef struct asystats { - unsigned long opens; - unsigned long txchars; - unsigned long rxchars; - unsigned long txringq; - unsigned long rxringq; - unsigned long txmsgs; - unsigned long rxmsgs; - unsigned long txflushes; - unsigned long rxflushes; - unsigned long overruns; - unsigned long framing; - unsigned long parity; - unsigned long ringover; - unsigned long lost; - unsigned long rxstart; - unsigned long rxstop; - unsigned long txstart; - unsigned long txstop; - unsigned long dcdcnt; - unsigned long dtrcnt; - unsigned long ctscnt; - unsigned long rtscnt; - unsigned long dsrcnt; - unsigned long ricnt; - unsigned long txbreaks; - unsigned long rxbreaks; - unsigned long signals; - unsigned long state; - unsigned long hwid; -} asystats_t; - -/*****************************************************************************/ - -/* - * All command and control communication with a device on the slave is - * via a control block in shared memory. Each device has its own control - * block, defined by the following structure. The control block allows - * the host to open, close and control the device on the slave. - */ -typedef struct cdkctrl { - unsigned char open; - unsigned char close; - unsigned long openarg; - unsigned long closearg; - unsigned long cmd; - unsigned long status; - unsigned long args[32]; -} cdkctrl_t; - -/* - * Each device on the slave passes data to and from the host via a ring - * queue in shared memory. Define a ring queue structure to hold the - * vital information about each ring queue. Two ring queues will be - * allocated for each port, one for receive data and one for transmit - * data. - */ -typedef struct cdkasyrq { - unsigned long offset; - unsigned short size; - unsigned short head; - unsigned short tail; -} cdkasyrq_t; - -/* - * Each asynchronous port is defined in shared memory by the following - * structure. It contains a control block to command a device, and also - * the necessary data channel information as well. - */ -typedef struct cdkasy { - cdkctrl_t ctrl; - unsigned short notify; - asynotify_t changed; - unsigned short receive; - cdkasyrq_t rxq; - unsigned short transmit; - cdkasyrq_t txq; -} cdkasy_t; - -#pragma pack() - -/*****************************************************************************/ - -/* - * Define the set of ioctls used by the driver to do special things - * to the board. These include interrupting it, and initializing - * the driver after board startup and shutdown. - */ -#include <linux/ioctl.h> - -#define STL_BINTR _IO('s',20) -#define STL_BSTART _IO('s',21) -#define STL_BSTOP _IO('s',22) -#define STL_BRESET _IO('s',23) - -/* - * Define a set of ioctl extensions, used to get at special stuff. - */ -#define STL_GETPFLAG _IO('s',80) -#define STL_SETPFLAG _IO('s',81) - -/*****************************************************************************/ -#endif diff --git a/include/linux/comstats.h b/include/linux/comstats.h deleted file mode 100644 index 3f5ea8e8026d..000000000000 --- a/include/linux/comstats.h +++ /dev/null @@ -1,119 +0,0 @@ -/*****************************************************************************/ - -/* - * comstats.h -- Serial Port Stats. - * - * Copyright (C) 1996-1998 Stallion Technologies - * Copyright (C) 1994-1996 Greg Ungerer. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/*****************************************************************************/ -#ifndef _COMSTATS_H -#define _COMSTATS_H -/*****************************************************************************/ - -/* - * Serial port stats structure. The structure itself is UART - * independent, but some fields may be UART/driver specific (for - * example state). - */ - -typedef struct { - unsigned long brd; - unsigned long panel; - unsigned long port; - unsigned long hwid; - unsigned long type; - unsigned long txtotal; - unsigned long rxtotal; - unsigned long txbuffered; - unsigned long rxbuffered; - unsigned long rxoverrun; - unsigned long rxparity; - unsigned long rxframing; - unsigned long rxlost; - unsigned long txbreaks; - unsigned long rxbreaks; - unsigned long txxon; - unsigned long txxoff; - unsigned long rxxon; - unsigned long rxxoff; - unsigned long txctson; - unsigned long txctsoff; - unsigned long rxrtson; - unsigned long rxrtsoff; - unsigned long modem; - unsigned long state; - unsigned long flags; - unsigned long ttystate; - unsigned long cflags; - unsigned long iflags; - unsigned long oflags; - unsigned long lflags; - unsigned long signals; -} comstats_t; - - -/* - * Board stats structure. Returns useful info about the board. - */ - -#define COM_MAXPANELS 8 - -typedef struct { - unsigned long panel; - unsigned long type; - unsigned long hwid; - unsigned long nrports; -} companel_t; - -typedef struct { - unsigned long brd; - unsigned long type; - unsigned long hwid; - unsigned long state; - unsigned long ioaddr; - unsigned long ioaddr2; - unsigned long memaddr; - unsigned long irq; - unsigned long nrpanels; - unsigned long nrports; - companel_t panels[COM_MAXPANELS]; -} combrd_t; - - -/* - * Define the ioctl operations for stats stuff. - */ -#include <linux/ioctl.h> - -#define COM_GETPORTSTATS _IO('c',30) -#define COM_CLRPORTSTATS _IO('c',31) -#define COM_GETBRDSTATS _IO('c',32) - - -/* - * Define the set of ioctls that give user level access to the - * private port, panel and board structures. The argument required - * will be driver dependent! - */ -#define COM_READPORT _IO('c',40) -#define COM_READBOARD _IO('c',41) -#define COM_READPANEL _IO('c',42) - -/*****************************************************************************/ -#endif diff --git a/include/linux/generic_serial.h b/include/linux/generic_serial.h deleted file mode 100644 index 79b3eb37243a..000000000000 --- a/include/linux/generic_serial.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * generic_serial.h - * - * Copyright (C) 1998 R.E.Wolff@BitWizard.nl - * - * written for the SX serial driver. - * - * Version 0.1 -- December, 1998. - */ - -#ifndef GENERIC_SERIAL_H -#define GENERIC_SERIAL_H - -#warning Use of this header is deprecated. -#warning Since nobody sets the constants defined here for you, you should not, in any case, use them. Including the header is thus pointless. - -/* Flags */ -/* Warning: serial.h defines some ASYNC_ flags, they say they are "only" - used in serial.c, but they are also used in all other serial drivers. - Make sure they don't clash with these here... */ -#define GS_TX_INTEN 0x00800000 -#define GS_RX_INTEN 0x00400000 -#define GS_ACTIVE 0x00200000 - -#define GS_TYPE_NORMAL 1 - -#define GS_DEBUG_FLUSH 0x00000001 -#define GS_DEBUG_BTR 0x00000002 -#define GS_DEBUG_TERMIOS 0x00000004 -#define GS_DEBUG_STUFF 0x00000008 -#define GS_DEBUG_CLOSE 0x00000010 -#define GS_DEBUG_FLOW 0x00000020 -#define GS_DEBUG_WRITE 0x00000040 - -#endif diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 7ea898c55a60..a12a38107c1a 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -561,9 +561,6 @@ struct twl4030_bci_platform_data { /* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */ struct twl4030_gpio_platform_data { - int gpio_base; - unsigned irq_base, irq_end; - /* package the two LED signals as output-only GPIOs? */ bool use_leds; diff --git a/include/linux/istallion.h b/include/linux/istallion.h deleted file mode 100644 index ad700a60c158..000000000000 --- a/include/linux/istallion.h +++ /dev/null @@ -1,123 +0,0 @@ -/*****************************************************************************/ - -/* - * istallion.h -- stallion intelligent multiport serial driver. - * - * Copyright (C) 1996-1998 Stallion Technologies - * Copyright (C) 1994-1996 Greg Ungerer. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/*****************************************************************************/ -#ifndef _ISTALLION_H -#define _ISTALLION_H -/*****************************************************************************/ - -/* - * Define important driver constants here. - */ -#define STL_MAXBRDS 4 -#define STL_MAXPANELS 4 -#define STL_MAXPORTS 64 -#define STL_MAXCHANS (STL_MAXPORTS + 1) -#define STL_MAXDEVS (STL_MAXBRDS * STL_MAXPORTS) - - -/* - * Define a set of structures to hold all the board/panel/port info - * for our ports. These will be dynamically allocated as required at - * driver initialization time. - */ - -/* - * Port and board structures to hold status info about each object. - * The board structure contains pointers to structures for each port - * connected to it. Panels are not distinguished here, since - * communication with the slave board will always be on a per port - * basis. - */ -struct stliport { - unsigned long magic; - struct tty_port port; - unsigned int portnr; - unsigned int panelnr; - unsigned int brdnr; - unsigned long state; - unsigned int devnr; - int baud_base; - int custom_divisor; - int closing_wait; - int rc; - int argsize; - void *argp; - unsigned int rxmarkmsk; - wait_queue_head_t raw_wait; - struct asysigs asig; - unsigned long addr; - unsigned long rxoffset; - unsigned long txoffset; - unsigned long sigs; - unsigned long pflag; - unsigned int rxsize; - unsigned int txsize; - unsigned char reqbit; - unsigned char portidx; - unsigned char portbit; -}; - -/* - * Use a structure of function pointers to do board level operations. - * These include, enable/disable, paging shared memory, interrupting, etc. - */ -struct stlibrd { - unsigned long magic; - unsigned int brdnr; - unsigned int brdtype; - unsigned long state; - unsigned int nrpanels; - unsigned int nrports; - unsigned int nrdevs; - unsigned int iobase; - int iosize; - unsigned long memaddr; - void __iomem *membase; - unsigned long memsize; - int pagesize; - int hostoffset; - int slaveoffset; - int bitsize; - int enabval; - unsigned int panels[STL_MAXPANELS]; - int panelids[STL_MAXPANELS]; - void (*init)(struct stlibrd *brdp); - void (*enable)(struct stlibrd *brdp); - void (*reenable)(struct stlibrd *brdp); - void (*disable)(struct stlibrd *brdp); - void __iomem *(*getmemptr)(struct stlibrd *brdp, unsigned long offset, int line); - void (*intr)(struct stlibrd *brdp); - void (*reset)(struct stlibrd *brdp); - struct stliport *ports[STL_MAXPORTS]; -}; - - -/* - * Define MAGIC numbers used for above structures. - */ -#define STLI_PORTMAGIC 0xe671c7a1 -#define STLI_BOARDMAGIC 0x4bc6c825 - -/*****************************************************************************/ -#endif diff --git a/include/linux/kbd_kern.h b/include/linux/kbd_kern.h index daf4a3a40ee0..b7c8cdc1d422 100644 --- a/include/linux/kbd_kern.h +++ b/include/linux/kbd_kern.h @@ -65,7 +65,6 @@ struct kbd_struct { extern int kbd_init(void); -extern unsigned char getledstate(void); extern void setledstate(struct kbd_struct *kbd, unsigned int led); extern int do_poke_blanked_console; @@ -145,16 +144,4 @@ void compute_shiftstate(void); extern unsigned int keymap_count; -/* console.c */ - -static inline void con_schedule_flip(struct tty_struct *t) -{ - unsigned long flags; - spin_lock_irqsave(&t->buf.lock, flags); - if (t->buf.tail != NULL) - t->buf.tail->commit = t->buf.tail->used; - spin_unlock_irqrestore(&t->buf.lock, flags); - schedule_work(&t->buf.work); -} - #endif diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 604382143bcf..594b419b7d20 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -82,10 +82,18 @@ __x - (__x % (y)); \ } \ ) + +/* + * Divide positive or negative dividend by positive divisor and round + * to closest integer. Result is undefined for negative divisors. + */ #define DIV_ROUND_CLOSEST(x, divisor)( \ { \ - typeof(divisor) __divisor = divisor; \ - (((x) + ((__divisor) / 2)) / (__divisor)); \ + typeof(x) __x = x; \ + typeof(divisor) __d = divisor; \ + (((typeof(x))-1) >= 0 || (__x) >= 0) ? \ + (((__x) + ((__d) / 2)) / (__d)) : \ + (((__x) - ((__d) / 2)) / (__d)); \ } \ ) diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index eaad49f7c130..ba43d4806b83 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -194,7 +194,6 @@ struct twl6040_vibra_data { struct twl6040_platform_data { int audpwron_gpio; /* audio power-on gpio */ - unsigned int irq_base; struct twl6040_codec_data *codec; struct twl6040_vibra_data *vibra; diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 111aca5e97f3..4b27f9f503e4 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -239,6 +239,7 @@ struct mmc_card { #define MMC_QUIRK_BLK_NO_CMD23 (1<<7) /* Avoid CMD23 for regular multiblock */ #define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8) /* Avoid sending 512 bytes in */ #define MMC_QUIRK_LONG_READ_TIME (1<<9) /* Data read time > CSD says */ +#define MMC_QUIRK_SEC_ERASE_TRIM_BROKEN (1<<10) /* Skip secure for erase/trim */ /* byte mode */ unsigned int poweroff_notify_state; /* eMMC4.5 notify feature */ #define MMC_NO_POWER_NOTIFICATION 0 diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h index 4ff57e81051d..85af8184691a 100644 --- a/include/linux/omapfb.h +++ b/include/linux/omapfb.h @@ -220,7 +220,12 @@ struct omapfb_display_info { #ifdef __KERNEL__ -#include <plat/board.h> +struct omap_lcd_config { + char panel_name[16]; + char ctrl_name[16]; + s16 nreset_gpio; + u8 data_lines; +}; struct omapfb_platform_data { struct omap_lcd_config lcd; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index fc3526077348..6b4565c440c8 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2149,7 +2149,7 @@ #define PCI_DEVICE_ID_TIGON3_5704S 0x16a8 #define PCI_DEVICE_ID_NX2_57800_VF 0x16a9 #define PCI_DEVICE_ID_NX2_5706S 0x16aa -#define PCI_DEVICE_ID_NX2_57840_MF 0x16ab +#define PCI_DEVICE_ID_NX2_57840_MF 0x16a4 #define PCI_DEVICE_ID_NX2_5708S 0x16ac #define PCI_DEVICE_ID_NX2_57840_VF 0x16ad #define PCI_DEVICE_ID_NX2_57810_MF 0x16ae diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/include/linux/platform_data/gpio-omap.h index 50fb7cc000ea..e8741c2678d5 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/include/linux/platform_data/gpio-omap.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/gpio.h - * * OMAP GPIO handling defines and functions * * Copyright (C) 2003-2005 Nokia Corporation @@ -155,6 +153,8 @@ #define OMAP4_GPIO_CLEARDATAOUT 0x0190 #define OMAP4_GPIO_SETDATAOUT 0x0194 +#define OMAP_MAX_GPIO_LINES 192 + #define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) #define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) @@ -213,16 +213,5 @@ extern void omap2_gpio_prepare_for_idle(int off_mode); extern void omap2_gpio_resume_after_idle(void); extern void omap_set_gpio_debounce(int gpio, int enable); extern void omap_set_gpio_debounce_time(int gpio, int enable); -/*-------------------------------------------------------------------------*/ - -/* - * Wrappers for "new style" GPIO calls, using the new infrastructure - * which lets us plug in FPGA, I2C, and other implementations. - * - * The original OMAP-specific calls should eventually be removed. - */ - -#include <linux/errno.h> -#include <asm-generic/gpio.h> #endif diff --git a/include/linux/platform_data/max310x.h b/include/linux/platform_data/max310x.h new file mode 100644 index 000000000000..91648bf5fc5c --- /dev/null +++ b/include/linux/platform_data/max310x.h @@ -0,0 +1,67 @@ +/* + * Maxim (Dallas) MAX3107/8 serial driver + * + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * + * Based on max3100.c, by Christian Pellegrin <chripell@evolware.org> + * Based on max3110.c, by Feng Tang <feng.tang@intel.com> + * Based on max3107.c, by Aavamobile + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _MAX310X_H_ +#define _MAX310X_H_ + +/* + * Example board initialization data: + * + * static struct max310x_pdata max3107_pdata = { + * .driver_flags = MAX310X_EXT_CLK, + * .uart_flags[0] = MAX310X_ECHO_SUPRESS | MAX310X_AUTO_DIR_CTRL, + * .frequency = 3686400, + * .gpio_base = -1, + * }; + * + * static struct spi_board_info spi_device_max3107[] = { + * { + * .modalias = "max3107", + * .irq = IRQ_EINT3, + * .bus_num = 1, + * .chip_select = 1, + * .platform_data = &max3107_pdata, + * }, + * }; + */ + +#define MAX310X_MAX_UARTS 1 + +/* MAX310X platform data structure */ +struct max310x_pdata { + /* Flags global to driver */ + const u8 driver_flags:2; +#define MAX310X_EXT_CLK (0x00000001) /* External clock enable */ +#define MAX310X_AUTOSLEEP (0x00000002) /* Enable AutoSleep mode */ + /* Flags global to UART port */ + const u8 uart_flags[MAX310X_MAX_UARTS]; +#define MAX310X_LOOPBACK (0x00000001) /* Loopback mode enable */ +#define MAX310X_ECHO_SUPRESS (0x00000002) /* Enable echo supress */ +#define MAX310X_AUTO_DIR_CTRL (0x00000004) /* Enable Auto direction + * control (RS-485) + */ + /* Frequency (extrenal clock or crystal) */ + const int frequency; + /* GPIO base number (can be negative) */ + const int gpio_base; + /* Called during startup */ + void (*init)(void); + /* Called before finish */ + void (*exit)(void); + /* Suspend callback */ + void (*suspend)(int do_suspend); +}; + +#endif diff --git a/include/linux/platform_data/omap1_bl.h b/include/linux/platform_data/omap1_bl.h new file mode 100644 index 000000000000..881a8e92d605 --- /dev/null +++ b/include/linux/platform_data/omap1_bl.h @@ -0,0 +1,11 @@ +#ifndef __OMAP1_BL_H__ +#define __OMAP1_BL_H__ + +#include <linux/device.h> + +struct omap_backlight_config { + int default_intensity; + int (*set_power)(struct device *dev, int state); +}; + +#endif diff --git a/include/linux/platform_data/sccnxp.h b/include/linux/platform_data/sccnxp.h new file mode 100644 index 000000000000..7311ccd3217f --- /dev/null +++ b/include/linux/platform_data/sccnxp.h @@ -0,0 +1,93 @@ +/* + * NXP (Philips) SCC+++(SCN+++) serial driver + * + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * + * Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __SCCNXP_H +#define __SCCNXP_H + +#define SCCNXP_MAX_UARTS 2 + +/* Output lines */ +#define LINE_OP0 1 +#define LINE_OP1 2 +#define LINE_OP2 3 +#define LINE_OP3 4 +#define LINE_OP4 5 +#define LINE_OP5 6 +#define LINE_OP6 7 +#define LINE_OP7 8 + +/* Input lines */ +#define LINE_IP0 9 +#define LINE_IP1 10 +#define LINE_IP2 11 +#define LINE_IP3 12 +#define LINE_IP4 13 +#define LINE_IP5 14 +#define LINE_IP6 15 + +/* Signals */ +#define DTR_OP 0 /* DTR */ +#define RTS_OP 4 /* RTS */ +#define DSR_IP 8 /* DSR */ +#define CTS_IP 12 /* CTS */ +#define DCD_IP 16 /* DCD */ +#define RNG_IP 20 /* RNG */ + +#define DIR_OP 24 /* Special signal for control RS-485. + * Goes high when transmit, + * then goes low. + */ + +/* Routing control signal 'sig' to line 'line' */ +#define MCTRL_SIG(sig, line) ((line) << (sig)) + +/* + * Example board initialization data: + * + * static struct resource sc2892_resources[] = { + * DEFINE_RES_MEM(UART_PHYS_START, 0x10), + * DEFINE_RES_IRQ(IRQ_EXT2), + * }; + * + * static struct sccnxp_pdata sc2892_info = { + * .frequency = 3686400, + * .mctrl_cfg[0] = MCTRL_SIG(DIR_OP, LINE_OP0), + * .mctrl_cfg[1] = MCTRL_SIG(DIR_OP, LINE_OP1), + * }; + * + * static struct platform_device sc2892 = { + * .name = "sc2892", + * .id = -1, + * .resource = sc2892_resources, + * .num_resources = ARRAY_SIZE(sc2892_resources), + * .dev = { + * .platform_data = &sc2892_info, + * }, + * }; + */ + +/* SCCNXP platform data structure */ +struct sccnxp_pdata { + /* Frequency (extrenal clock or crystal) */ + int frequency; + /* Shift for A0 line */ + const u8 reg_shift; + /* Modem control lines configuration */ + const u32 mctrl_cfg[SCCNXP_MAX_UARTS]; + /* Called during startup */ + void (*init)(void); + /* Called before finish */ + void (*exit)(void); +}; + +#endif diff --git a/include/linux/sc26198.h b/include/linux/sc26198.h deleted file mode 100644 index 7ca35abad387..000000000000 --- a/include/linux/sc26198.h +++ /dev/null @@ -1,533 +0,0 @@ -/*****************************************************************************/ - -/* - * sc26198.h -- SC26198 UART hardware info. - * - * Copyright (C) 1995-1998 Stallion Technologies - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/*****************************************************************************/ -#ifndef _SC26198_H -#define _SC26198_H -/*****************************************************************************/ - -/* - * Define the number of async ports per sc26198 uart device. - */ -#define SC26198_PORTS 8 - -/* - * Baud rate timing clocks. All derived from a master 14.7456 MHz clock. - */ -#define SC26198_MASTERCLOCK 14745600L -#define SC26198_DCLK (SC26198_MASTERCLOCK) -#define SC26198_CCLK (SC26198_MASTERCLOCK / 2) -#define SC26198_BCLK (SC26198_MASTERCLOCK / 4) - -/* - * Define internal FIFO sizes for the 26198 ports. - */ -#define SC26198_TXFIFOSIZE 16 -#define SC26198_RXFIFOSIZE 16 - -/*****************************************************************************/ - -/* - * Global register definitions. These registers are global to each 26198 - * device, not specific ports on it. - */ -#define TSTR 0x0d -#define GCCR 0x0f -#define ICR 0x1b -#define WDTRCR 0x1d -#define IVR 0x1f -#define BRGTRUA 0x84 -#define GPOSR 0x87 -#define GPOC 0x8b -#define UCIR 0x8c -#define CIR 0x8c -#define BRGTRUB 0x8d -#define GRXFIFO 0x8e -#define GTXFIFO 0x8e -#define GCCR2 0x8f -#define BRGTRLA 0x94 -#define GPOR 0x97 -#define GPOD 0x9b -#define BRGTCR 0x9c -#define GICR 0x9c -#define BRGTRLB 0x9d -#define GIBCR 0x9d -#define GITR 0x9f - -/* - * Per port channel registers. These are the register offsets within - * the port address space, so need to have the port address (0 to 7) - * inserted in bit positions 4:6. - */ -#define MR0 0x00 -#define MR1 0x01 -#define IOPCR 0x02 -#define BCRBRK 0x03 -#define BCRCOS 0x04 -#define BCRX 0x06 -#define BCRA 0x07 -#define XONCR 0x08 -#define XOFFCR 0x09 -#define ARCR 0x0a -#define RXCSR 0x0c -#define TXCSR 0x0e -#define MR2 0x80 -#define SR 0x81 -#define SCCR 0x81 -#define ISR 0x82 -#define IMR 0x82 -#define TXFIFO 0x83 -#define RXFIFO 0x83 -#define IPR 0x84 -#define IOPIOR 0x85 -#define XISR 0x86 - -/* - * For any given port calculate the address to use to access a specified - * register. This is only used for unusual access, mostly this is done - * through the assembler access routines. - */ -#define SC26198_PORTREG(port,reg) ((((port) & 0x07) << 4) | (reg)) - -/*****************************************************************************/ - -/* - * Global configuration control register bit definitions. - */ -#define GCCR_NOACK 0x00 -#define GCCR_IVRACK 0x02 -#define GCCR_IVRCHANACK 0x04 -#define GCCR_IVRTYPCHANACK 0x06 -#define GCCR_ASYNCCYCLE 0x00 -#define GCCR_SYNCCYCLE 0x40 - -/*****************************************************************************/ - -/* - * Mode register 0 bit definitions. - */ -#define MR0_ADDRNONE 0x00 -#define MR0_AUTOWAKE 0x01 -#define MR0_AUTODOZE 0x02 -#define MR0_AUTOWAKEDOZE 0x03 -#define MR0_SWFNONE 0x00 -#define MR0_SWFTX 0x04 -#define MR0_SWFRX 0x08 -#define MR0_SWFRXTX 0x0c -#define MR0_TXMASK 0x30 -#define MR0_TXEMPTY 0x00 -#define MR0_TXHIGH 0x10 -#define MR0_TXHALF 0x20 -#define MR0_TXRDY 0x00 -#define MR0_ADDRNT 0x00 -#define MR0_ADDRT 0x40 -#define MR0_SWFNT 0x00 -#define MR0_SWFT 0x80 - -/* - * Mode register 1 bit definitions. - */ -#define MR1_CS5 0x00 -#define MR1_CS6 0x01 -#define MR1_CS7 0x02 -#define MR1_CS8 0x03 -#define MR1_PAREVEN 0x00 -#define MR1_PARODD 0x04 -#define MR1_PARENB 0x00 -#define MR1_PARFORCE 0x08 -#define MR1_PARNONE 0x10 -#define MR1_PARSPECIAL 0x18 -#define MR1_ERRCHAR 0x00 -#define MR1_ERRBLOCK 0x20 -#define MR1_ISRUNMASKED 0x00 -#define MR1_ISRMASKED 0x40 -#define MR1_AUTORTS 0x80 - -/* - * Mode register 2 bit definitions. - */ -#define MR2_STOP1 0x00 -#define MR2_STOP15 0x01 -#define MR2_STOP2 0x02 -#define MR2_STOP916 0x03 -#define MR2_RXFIFORDY 0x00 -#define MR2_RXFIFOHALF 0x04 -#define MR2_RXFIFOHIGH 0x08 -#define MR2_RXFIFOFULL 0x0c -#define MR2_AUTOCTS 0x10 -#define MR2_TXRTS 0x20 -#define MR2_MODENORM 0x00 -#define MR2_MODEAUTOECHO 0x40 -#define MR2_MODELOOP 0x80 -#define MR2_MODEREMECHO 0xc0 - -/*****************************************************************************/ - -/* - * Baud Rate Generator (BRG) selector values. - */ -#define BRG_50 0x00 -#define BRG_75 0x01 -#define BRG_150 0x02 -#define BRG_200 0x03 -#define BRG_300 0x04 -#define BRG_450 0x05 -#define BRG_600 0x06 -#define BRG_900 0x07 -#define BRG_1200 0x08 -#define BRG_1800 0x09 -#define BRG_2400 0x0a -#define BRG_3600 0x0b -#define BRG_4800 0x0c -#define BRG_7200 0x0d -#define BRG_9600 0x0e -#define BRG_14400 0x0f -#define BRG_19200 0x10 -#define BRG_28200 0x11 -#define BRG_38400 0x12 -#define BRG_57600 0x13 -#define BRG_115200 0x14 -#define BRG_230400 0x15 -#define BRG_GIN0 0x16 -#define BRG_GIN1 0x17 -#define BRG_CT0 0x18 -#define BRG_CT1 0x19 -#define BRG_RX2TX316 0x1b -#define BRG_RX2TX31 0x1c - -#define SC26198_MAXBAUD 921600 - -/*****************************************************************************/ - -/* - * Command register command definitions. - */ -#define CR_NULL 0x04 -#define CR_ADDRNORMAL 0x0c -#define CR_RXRESET 0x14 -#define CR_TXRESET 0x1c -#define CR_CLEARRXERR 0x24 -#define CR_BREAKRESET 0x2c -#define CR_TXSTARTBREAK 0x34 -#define CR_TXSTOPBREAK 0x3c -#define CR_RTSON 0x44 -#define CR_RTSOFF 0x4c -#define CR_ADDRINIT 0x5c -#define CR_RXERRBLOCK 0x6c -#define CR_TXSENDXON 0x84 -#define CR_TXSENDXOFF 0x8c -#define CR_GANGXONSET 0x94 -#define CR_GANGXOFFSET 0x9c -#define CR_GANGXONINIT 0xa4 -#define CR_GANGXOFFINIT 0xac -#define CR_HOSTXON 0xb4 -#define CR_HOSTXOFF 0xbc -#define CR_CANCELXOFF 0xc4 -#define CR_ADDRRESET 0xdc -#define CR_RESETALLPORTS 0xf4 -#define CR_RESETALL 0xfc - -#define CR_RXENABLE 0x01 -#define CR_TXENABLE 0x02 - -/*****************************************************************************/ - -/* - * Channel status register. - */ -#define SR_RXRDY 0x01 -#define SR_RXFULL 0x02 -#define SR_TXRDY 0x04 -#define SR_TXEMPTY 0x08 -#define SR_RXOVERRUN 0x10 -#define SR_RXPARITY 0x20 -#define SR_RXFRAMING 0x40 -#define SR_RXBREAK 0x80 - -#define SR_RXERRS (SR_RXPARITY | SR_RXFRAMING | SR_RXOVERRUN) - -/*****************************************************************************/ - -/* - * Interrupt status register and interrupt mask register bit definitions. - */ -#define IR_TXRDY 0x01 -#define IR_RXRDY 0x02 -#define IR_RXBREAK 0x04 -#define IR_XONXOFF 0x10 -#define IR_ADDRRECOG 0x20 -#define IR_RXWATCHDOG 0x40 -#define IR_IOPORT 0x80 - -/*****************************************************************************/ - -/* - * Interrupt vector register field definitions. - */ -#define IVR_CHANMASK 0x07 -#define IVR_TYPEMASK 0x18 -#define IVR_CONSTMASK 0xc0 - -#define IVR_RXDATA 0x10 -#define IVR_RXBADDATA 0x18 -#define IVR_TXDATA 0x08 -#define IVR_OTHER 0x00 - -/*****************************************************************************/ - -/* - * BRG timer control register bit definitions. - */ -#define BRGCTCR_DISABCLK0 0x00 -#define BRGCTCR_ENABCLK0 0x08 -#define BRGCTCR_DISABCLK1 0x00 -#define BRGCTCR_ENABCLK1 0x80 - -#define BRGCTCR_0SCLK16 0x00 -#define BRGCTCR_0SCLK32 0x01 -#define BRGCTCR_0SCLK64 0x02 -#define BRGCTCR_0SCLK128 0x03 -#define BRGCTCR_0X1 0x04 -#define BRGCTCR_0X12 0x05 -#define BRGCTCR_0IO1A 0x06 -#define BRGCTCR_0GIN0 0x07 - -#define BRGCTCR_1SCLK16 0x00 -#define BRGCTCR_1SCLK32 0x10 -#define BRGCTCR_1SCLK64 0x20 -#define BRGCTCR_1SCLK128 0x30 -#define BRGCTCR_1X1 0x40 -#define BRGCTCR_1X12 0x50 -#define BRGCTCR_1IO1B 0x60 -#define BRGCTCR_1GIN1 0x70 - -/*****************************************************************************/ - -/* - * Watch dog timer enable register. - */ -#define WDTRCR_ENABALL 0xff - -/*****************************************************************************/ - -/* - * XON/XOFF interrupt status register. - */ -#define XISR_TXCHARMASK 0x03 -#define XISR_TXCHARNORMAL 0x00 -#define XISR_TXWAIT 0x01 -#define XISR_TXXOFFPEND 0x02 -#define XISR_TXXONPEND 0x03 - -#define XISR_TXFLOWMASK 0x0c -#define XISR_TXNORMAL 0x00 -#define XISR_TXSTOPPEND 0x04 -#define XISR_TXSTARTED 0x08 -#define XISR_TXSTOPPED 0x0c - -#define XISR_RXFLOWMASK 0x30 -#define XISR_RXFLOWNONE 0x00 -#define XISR_RXXONSENT 0x10 -#define XISR_RXXOFFSENT 0x20 - -#define XISR_RXXONGOT 0x40 -#define XISR_RXXOFFGOT 0x80 - -/*****************************************************************************/ - -/* - * Current interrupt register. - */ -#define CIR_TYPEMASK 0xc0 -#define CIR_TYPEOTHER 0x00 -#define CIR_TYPETX 0x40 -#define CIR_TYPERXGOOD 0x80 -#define CIR_TYPERXBAD 0xc0 - -#define CIR_RXDATA 0x80 -#define CIR_RXBADDATA 0x40 -#define CIR_TXDATA 0x40 - -#define CIR_CHANMASK 0x07 -#define CIR_CNTMASK 0x38 - -#define CIR_SUBTYPEMASK 0x38 -#define CIR_SUBNONE 0x00 -#define CIR_SUBCOS 0x08 -#define CIR_SUBADDR 0x10 -#define CIR_SUBXONXOFF 0x18 -#define CIR_SUBBREAK 0x28 - -/*****************************************************************************/ - -/* - * Global interrupting channel register. - */ -#define GICR_CHANMASK 0x07 - -/*****************************************************************************/ - -/* - * Global interrupting byte count register. - */ -#define GICR_COUNTMASK 0x0f - -/*****************************************************************************/ - -/* - * Global interrupting type register. - */ -#define GITR_RXMASK 0xc0 -#define GITR_RXNONE 0x00 -#define GITR_RXBADDATA 0x80 -#define GITR_RXGOODDATA 0xc0 -#define GITR_TXDATA 0x20 - -#define GITR_SUBTYPEMASK 0x07 -#define GITR_SUBNONE 0x00 -#define GITR_SUBCOS 0x01 -#define GITR_SUBADDR 0x02 -#define GITR_SUBXONXOFF 0x03 -#define GITR_SUBBREAK 0x05 - -/*****************************************************************************/ - -/* - * Input port change register. - */ -#define IPR_CTS 0x01 -#define IPR_DTR 0x02 -#define IPR_RTS 0x04 -#define IPR_DCD 0x08 -#define IPR_CTSCHANGE 0x10 -#define IPR_DTRCHANGE 0x20 -#define IPR_RTSCHANGE 0x40 -#define IPR_DCDCHANGE 0x80 - -#define IPR_CHANGEMASK 0xf0 - -/*****************************************************************************/ - -/* - * IO port interrupt and output register. - */ -#define IOPR_CTS 0x01 -#define IOPR_DTR 0x02 -#define IOPR_RTS 0x04 -#define IOPR_DCD 0x08 -#define IOPR_CTSCOS 0x10 -#define IOPR_DTRCOS 0x20 -#define IOPR_RTSCOS 0x40 -#define IOPR_DCDCOS 0x80 - -/*****************************************************************************/ - -/* - * IO port configuration register. - */ -#define IOPCR_SETCTS 0x00 -#define IOPCR_SETDTR 0x04 -#define IOPCR_SETRTS 0x10 -#define IOPCR_SETDCD 0x00 - -#define IOPCR_SETSIGS (IOPCR_SETRTS | IOPCR_SETRTS | IOPCR_SETDTR | IOPCR_SETDCD) - -/*****************************************************************************/ - -/* - * General purpose output select register. - */ -#define GPORS_TXC1XA 0x08 -#define GPORS_TXC16XA 0x09 -#define GPORS_RXC16XA 0x0a -#define GPORS_TXC16XB 0x0b -#define GPORS_GPOR3 0x0c -#define GPORS_GPOR2 0x0d -#define GPORS_GPOR1 0x0e -#define GPORS_GPOR0 0x0f - -/*****************************************************************************/ - -/* - * General purpose output register. - */ -#define GPOR_0 0x01 -#define GPOR_1 0x02 -#define GPOR_2 0x04 -#define GPOR_3 0x08 - -/*****************************************************************************/ - -/* - * General purpose output clock register. - */ -#define GPORC_0NONE 0x00 -#define GPORC_0GIN0 0x01 -#define GPORC_0GIN1 0x02 -#define GPORC_0IO3A 0x02 - -#define GPORC_1NONE 0x00 -#define GPORC_1GIN0 0x04 -#define GPORC_1GIN1 0x08 -#define GPORC_1IO3C 0x0c - -#define GPORC_2NONE 0x00 -#define GPORC_2GIN0 0x10 -#define GPORC_2GIN1 0x20 -#define GPORC_2IO3E 0x20 - -#define GPORC_3NONE 0x00 -#define GPORC_3GIN0 0x40 -#define GPORC_3GIN1 0x80 -#define GPORC_3IO3G 0xc0 - -/*****************************************************************************/ - -/* - * General purpose output data register. - */ -#define GPOD_0MASK 0x03 -#define GPOD_0SET1 0x00 -#define GPOD_0SET0 0x01 -#define GPOD_0SETR0 0x02 -#define GPOD_0SETIO3B 0x03 - -#define GPOD_1MASK 0x0c -#define GPOD_1SET1 0x00 -#define GPOD_1SET0 0x04 -#define GPOD_1SETR0 0x08 -#define GPOD_1SETIO3D 0x0c - -#define GPOD_2MASK 0x30 -#define GPOD_2SET1 0x00 -#define GPOD_2SET0 0x10 -#define GPOD_2SETR0 0x20 -#define GPOD_2SETIO3F 0x30 - -#define GPOD_3MASK 0xc0 -#define GPOD_3SET1 0x00 -#define GPOD_3SET0 0x40 -#define GPOD_3SETR0 0x80 -#define GPOD_3SETIO3H 0xc0 - -/*****************************************************************************/ -#endif diff --git a/include/linux/serial.h b/include/linux/serial.h index 90e9f981358a..861e51de476b 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -12,9 +12,12 @@ #include <linux/types.h> +#include <linux/tty_flags.h> + #ifdef __KERNEL__ #include <asm/page.h> + /* * Counters of the input lines (CTS, DSR, RI, CD) interrupts */ @@ -83,89 +86,11 @@ struct serial_struct { #define SERIAL_IO_HUB6 1 #define SERIAL_IO_MEM 2 -struct serial_uart_config { - char *name; - int dfl_xmit_fifo_size; - int flags; -}; - #define UART_CLEAR_FIFO 0x01 #define UART_USE_FIFO 0x02 #define UART_STARTECH 0x04 #define UART_NATSEMI 0x08 -/* - * Definitions for async_struct (and serial_struct) flags field - * - * Define ASYNCB_* for convenient use with {test,set,clear}_bit. - */ -#define ASYNCB_HUP_NOTIFY 0 /* Notify getty on hangups and closes - * on the callout port */ -#define ASYNCB_FOURPORT 1 /* Set OU1, OUT2 per AST Fourport settings */ -#define ASYNCB_SAK 2 /* Secure Attention Key (Orange book) */ -#define ASYNCB_SPLIT_TERMIOS 3 /* Separate termios for dialin/callout */ -#define ASYNCB_SPD_HI 4 /* Use 56000 instead of 38400 bps */ -#define ASYNCB_SPD_VHI 5 /* Use 115200 instead of 38400 bps */ -#define ASYNCB_SKIP_TEST 6 /* Skip UART test during autoconfiguration */ -#define ASYNCB_AUTO_IRQ 7 /* Do automatic IRQ during - * autoconfiguration */ -#define ASYNCB_SESSION_LOCKOUT 8 /* Lock out cua opens based on session */ -#define ASYNCB_PGRP_LOCKOUT 9 /* Lock out cua opens based on pgrp */ -#define ASYNCB_CALLOUT_NOHUP 10 /* Don't do hangups for cua device */ -#define ASYNCB_HARDPPS_CD 11 /* Call hardpps when CD goes high */ -#define ASYNCB_SPD_SHI 12 /* Use 230400 instead of 38400 bps */ -#define ASYNCB_LOW_LATENCY 13 /* Request low latency behaviour */ -#define ASYNCB_BUGGY_UART 14 /* This is a buggy UART, skip some safety - * checks. Note: can be dangerous! */ -#define ASYNCB_AUTOPROBE 15 /* Port was autoprobed by PCI or PNP code */ -#define ASYNCB_LAST_USER 15 - -/* Internal flags used only by kernel */ -#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */ -#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */ -#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */ -#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */ -#define ASYNCB_CLOSING 27 /* Serial port is closing */ -#define ASYNCB_CTS_FLOW 26 /* Do CTS flow control */ -#define ASYNCB_CHECK_CD 25 /* i.e., CLOCAL */ -#define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */ -#define ASYNCB_CONS_FLOW 23 /* flow control for console */ -#define ASYNCB_FIRST_KERNEL 22 - -#define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY) -#define ASYNC_SUSPENDED (1U << ASYNCB_SUSPENDED) -#define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT) -#define ASYNC_SAK (1U << ASYNCB_SAK) -#define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS) -#define ASYNC_SPD_HI (1U << ASYNCB_SPD_HI) -#define ASYNC_SPD_VHI (1U << ASYNCB_SPD_VHI) -#define ASYNC_SKIP_TEST (1U << ASYNCB_SKIP_TEST) -#define ASYNC_AUTO_IRQ (1U << ASYNCB_AUTO_IRQ) -#define ASYNC_SESSION_LOCKOUT (1U << ASYNCB_SESSION_LOCKOUT) -#define ASYNC_PGRP_LOCKOUT (1U << ASYNCB_PGRP_LOCKOUT) -#define ASYNC_CALLOUT_NOHUP (1U << ASYNCB_CALLOUT_NOHUP) -#define ASYNC_HARDPPS_CD (1U << ASYNCB_HARDPPS_CD) -#define ASYNC_SPD_SHI (1U << ASYNCB_SPD_SHI) -#define ASYNC_LOW_LATENCY (1U << ASYNCB_LOW_LATENCY) -#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART) -#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE) - -#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1) -#define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \ - ASYNC_LOW_LATENCY) -#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI) -#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI) -#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI) - -#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED) -#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE) -#define ASYNC_BOOT_AUTOCONF (1U << ASYNCB_BOOT_AUTOCONF) -#define ASYNC_CLOSING (1U << ASYNCB_CLOSING) -#define ASYNC_CTS_FLOW (1U << ASYNCB_CTS_FLOW) -#define ASYNC_CHECK_CD (1U << ASYNCB_CHECK_CD) -#define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ) -#define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW) -#define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1)) /* * Multiport serial configuration structure --- external structure diff --git a/include/linux/serial167.h b/include/linux/serial167.h deleted file mode 100644 index 59c81b708562..000000000000 --- a/include/linux/serial167.h +++ /dev/null @@ -1,157 +0,0 @@ -/* - * serial167.h - * - * Richard Hirst [richard@sleepie.demon.co.uk] - * - * Based on cyclades.h - */ - -struct cyclades_monitor { - unsigned long int_count; - unsigned long char_count; - unsigned long char_max; - unsigned long char_last; -}; - -/* - * This is our internal structure for each serial port's state. - * - * Many fields are paralleled by the structure used by the serial_struct - * structure. - * - * For definitions of the flags field, see tty.h - */ - -struct cyclades_port { - int magic; - int type; - int card; - int line; - int flags; /* defined in tty.h */ - struct tty_struct *tty; - int read_status_mask; - int timeout; - int xmit_fifo_size; - int cor1,cor2,cor3,cor4,cor5,cor6,cor7; - int tbpr,tco,rbpr,rco; - int ignore_status_mask; - int close_delay; - int IER; /* Interrupt Enable Register */ - unsigned long last_active; - int count; /* # of fd on device */ - int x_char; /* to be pushed out ASAP */ - int x_break; - int blocked_open; /* # of blocked opens */ - unsigned char *xmit_buf; - int xmit_head; - int xmit_tail; - int xmit_cnt; - int default_threshold; - int default_timeout; - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; - struct cyclades_monitor mon; -}; - -#define CYCLADES_MAGIC 0x4359 - -#define CYGETMON 0x435901 -#define CYGETTHRESH 0x435902 -#define CYSETTHRESH 0x435903 -#define CYGETDEFTHRESH 0x435904 -#define CYSETDEFTHRESH 0x435905 -#define CYGETTIMEOUT 0x435906 -#define CYSETTIMEOUT 0x435907 -#define CYGETDEFTIMEOUT 0x435908 -#define CYSETDEFTIMEOUT 0x435909 - -#define CyMaxChipsPerCard 1 - -/**** cd2401 registers ****/ - -#define CyGFRCR (0x81) -#define CyCCR (0x13) -#define CyCLR_CHAN (0x40) -#define CyINIT_CHAN (0x20) -#define CyCHIP_RESET (0x10) -#define CyENB_XMTR (0x08) -#define CyDIS_XMTR (0x04) -#define CyENB_RCVR (0x02) -#define CyDIS_RCVR (0x01) -#define CyCAR (0xee) -#define CyIER (0x11) -#define CyMdmCh (0x80) -#define CyRxExc (0x20) -#define CyRxData (0x08) -#define CyTxMpty (0x02) -#define CyTxRdy (0x01) -#define CyLICR (0x26) -#define CyRISR (0x89) -#define CyTIMEOUT (0x80) -#define CySPECHAR (0x70) -#define CyOVERRUN (0x08) -#define CyPARITY (0x04) -#define CyFRAME (0x02) -#define CyBREAK (0x01) -#define CyREOIR (0x84) -#define CyTEOIR (0x85) -#define CyMEOIR (0x86) -#define CyNOTRANS (0x08) -#define CyRFOC (0x30) -#define CyRDR (0xf8) -#define CyTDR (0xf8) -#define CyMISR (0x8b) -#define CyRISR (0x89) -#define CyTISR (0x8a) -#define CyMSVR1 (0xde) -#define CyMSVR2 (0xdf) -#define CyDSR (0x80) -#define CyDCD (0x40) -#define CyCTS (0x20) -#define CyDTR (0x02) -#define CyRTS (0x01) -#define CyRTPRL (0x25) -#define CyRTPRH (0x24) -#define CyCOR1 (0x10) -#define CyPARITY_NONE (0x00) -#define CyPARITY_E (0x40) -#define CyPARITY_O (0xC0) -#define Cy_5_BITS (0x04) -#define Cy_6_BITS (0x05) -#define Cy_7_BITS (0x06) -#define Cy_8_BITS (0x07) -#define CyCOR2 (0x17) -#define CyETC (0x20) -#define CyCtsAE (0x02) -#define CyCOR3 (0x16) -#define Cy_1_STOP (0x02) -#define Cy_2_STOP (0x04) -#define CyCOR4 (0x15) -#define CyREC_FIFO (0x0F) /* Receive FIFO threshold */ -#define CyCOR5 (0x14) -#define CyCOR6 (0x18) -#define CyCOR7 (0x07) -#define CyRBPR (0xcb) -#define CyRCOR (0xc8) -#define CyTBPR (0xc3) -#define CyTCOR (0xc0) -#define CySCHR1 (0x1f) -#define CySCHR2 (0x1e) -#define CyTPR (0xda) -#define CyPILR1 (0xe3) -#define CyPILR2 (0xe0) -#define CyPILR3 (0xe1) -#define CyCMR (0x1b) -#define CyASYNC (0x02) -#define CyLICR (0x26) -#define CyLIVR (0x09) -#define CySCRL (0x23) -#define CySCRH (0x22) -#define CyTFTC (0x80) - - -/* max number of chars in the FIFO */ - -#define CyMAX_CHAR_FIFO 12 - -/***************************************************************************/ diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index a416e92012ef..c174c90fb3fb 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -65,11 +65,38 @@ enum { * platform device. Using these will make your driver * dependent on the 8250 driver. */ -struct uart_port; -struct uart_8250_port; + +struct uart_8250_port { + struct uart_port port; + struct timer_list timer; /* "no irq" timer */ + struct list_head list; /* ports on this IRQ */ + unsigned short capabilities; /* port capabilities */ + unsigned short bugs; /* port bugs */ + unsigned int tx_loadsz; /* transmit fifo load size */ + unsigned char acr; + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned char mcr_mask; /* mask of user bits */ + unsigned char mcr_force; /* mask of forced bits */ + unsigned char cur_iotype; /* Running I/O type */ + + /* + * Some bits in registers are cleared on a read, so they must + * be saved whenever the register is read but the bits will not + * be immediately processed. + */ +#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS + unsigned char lsr_saved_flags; +#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA + unsigned char msr_saved_flags; + + /* 8250 specific callbacks */ + int (*dl_read)(struct uart_8250_port *); + void (*dl_write)(struct uart_8250_port *, int); +}; int serial8250_register_8250_port(struct uart_8250_port *); -int serial8250_register_port(struct uart_port *); void serial8250_unregister_port(int line); void serial8250_suspend_port(int line); void serial8250_resume_port(int line); diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 0253c2022e53..7cf0b68bbe9e 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -193,8 +193,8 @@ /* SH-SCI */ #define PORT_SCIFB 93 -/* MAX3107 */ -#define PORT_MAX3107 94 +/* MAX310X */ +#define PORT_MAX310X 94 /* High Speed UART for Medfield */ #define PORT_MFD 95 diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h index 8ce70d76f836..5ed325e88a81 100644 --- a/include/linux/serial_reg.h +++ b/include/linux/serial_reg.h @@ -40,6 +40,10 @@ #define UART_IIR_BUSY 0x07 /* DesignWare APB Busy Detect */ +#define UART_IIR_RX_TIMEOUT 0x0c /* OMAP RX Timeout interrupt */ +#define UART_IIR_XOFF 0x10 /* OMAP XOFF/Special Character */ +#define UART_IIR_CTS_RTS_DSR 0x20 /* OMAP CTS/RTS/DSR Change */ + #define UART_FCR 2 /* Out: FIFO Control Register */ #define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ #define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ diff --git a/include/linux/stallion.h b/include/linux/stallion.h deleted file mode 100644 index 336af33c6ea4..000000000000 --- a/include/linux/stallion.h +++ /dev/null @@ -1,147 +0,0 @@ -/*****************************************************************************/ - -/* - * stallion.h -- stallion multiport serial driver. - * - * Copyright (C) 1996-1998 Stallion Technologies - * Copyright (C) 1994-1996 Greg Ungerer. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/*****************************************************************************/ -#ifndef _STALLION_H -#define _STALLION_H -/*****************************************************************************/ - -/* - * Define important driver constants here. - */ -#define STL_MAXBRDS 4 -#define STL_MAXPANELS 4 -#define STL_MAXBANKS 8 -#define STL_PORTSPERPANEL 16 -#define STL_MAXPORTS 64 -#define STL_MAXDEVS (STL_MAXBRDS * STL_MAXPORTS) - - -/* - * Define a set of structures to hold all the board/panel/port info - * for our ports. These will be dynamically allocated as required. - */ - -/* - * Define a ring queue structure for each port. This will hold the - * TX data waiting to be output. Characters are fed into this buffer - * from the line discipline (or even direct from user space!) and - * then fed into the UARTs during interrupts. Will use a classic ring - * queue here for this. The good thing about this type of ring queue - * is that the head and tail pointers can be updated without interrupt - * protection - since "write" code only needs to change the head, and - * interrupt code only needs to change the tail. - */ -struct stlrq { - char *buf; - char *head; - char *tail; -}; - -/* - * Port, panel and board structures to hold status info about each. - * The board structure contains pointers to structures for each panel - * connected to it, and in turn each panel structure contains pointers - * for each port structure for each port on that panel. Note that - * the port structure also contains the board and panel number that it - * is associated with, this makes it (fairly) easy to get back to the - * board/panel info for a port. - */ -struct stlport { - unsigned long magic; - struct tty_port port; - unsigned int portnr; - unsigned int panelnr; - unsigned int brdnr; - int ioaddr; - int uartaddr; - unsigned int pagenr; - unsigned long istate; - int baud_base; - int custom_divisor; - int close_delay; - int closing_wait; - int openwaitcnt; - int brklen; - unsigned int sigs; - unsigned int rxignoremsk; - unsigned int rxmarkmsk; - unsigned int imr; - unsigned int crenable; - unsigned long clk; - unsigned long hwid; - void *uartp; - comstats_t stats; - struct stlrq tx; -}; - -struct stlpanel { - unsigned long magic; - unsigned int panelnr; - unsigned int brdnr; - unsigned int pagenr; - unsigned int nrports; - int iobase; - void *uartp; - void (*isr)(struct stlpanel *panelp, unsigned int iobase); - unsigned int hwid; - unsigned int ackmask; - struct stlport *ports[STL_PORTSPERPANEL]; -}; - -struct stlbrd { - unsigned long magic; - unsigned int brdnr; - unsigned int brdtype; - unsigned int state; - unsigned int nrpanels; - unsigned int nrports; - unsigned int nrbnks; - int irq; - int irqtype; - int (*isr)(struct stlbrd *brdp); - unsigned int ioaddr1; - unsigned int ioaddr2; - unsigned int iosize1; - unsigned int iosize2; - unsigned int iostatus; - unsigned int ioctrl; - unsigned int ioctrlval; - unsigned int hwid; - unsigned long clk; - unsigned int bnkpageaddr[STL_MAXBANKS]; - unsigned int bnkstataddr[STL_MAXBANKS]; - struct stlpanel *bnk2panel[STL_MAXBANKS]; - struct stlpanel *panels[STL_MAXPANELS]; -}; - - -/* - * Define MAGIC numbers used for above structures. - */ -#define STL_PORTMAGIC 0x5a7182c9 -#define STL_PANELMAGIC 0x7ef621a1 -#define STL_BOARDMAGIC 0xa2267f52 - -/*****************************************************************************/ -#endif diff --git a/include/linux/tty.h b/include/linux/tty.h index 9f47ab540f65..1509b86825d8 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -43,6 +43,7 @@ #include <linux/tty_driver.h> #include <linux/tty_ldisc.h> #include <linux/mutex.h> +#include <linux/tty_flags.h> @@ -103,28 +104,28 @@ struct tty_bufhead { #define TTY_PARITY 3 #define TTY_OVERRUN 4 -#define INTR_CHAR(tty) ((tty)->termios->c_cc[VINTR]) -#define QUIT_CHAR(tty) ((tty)->termios->c_cc[VQUIT]) -#define ERASE_CHAR(tty) ((tty)->termios->c_cc[VERASE]) -#define KILL_CHAR(tty) ((tty)->termios->c_cc[VKILL]) -#define EOF_CHAR(tty) ((tty)->termios->c_cc[VEOF]) -#define TIME_CHAR(tty) ((tty)->termios->c_cc[VTIME]) -#define MIN_CHAR(tty) ((tty)->termios->c_cc[VMIN]) -#define SWTC_CHAR(tty) ((tty)->termios->c_cc[VSWTC]) -#define START_CHAR(tty) ((tty)->termios->c_cc[VSTART]) -#define STOP_CHAR(tty) ((tty)->termios->c_cc[VSTOP]) -#define SUSP_CHAR(tty) ((tty)->termios->c_cc[VSUSP]) -#define EOL_CHAR(tty) ((tty)->termios->c_cc[VEOL]) -#define REPRINT_CHAR(tty) ((tty)->termios->c_cc[VREPRINT]) -#define DISCARD_CHAR(tty) ((tty)->termios->c_cc[VDISCARD]) -#define WERASE_CHAR(tty) ((tty)->termios->c_cc[VWERASE]) -#define LNEXT_CHAR(tty) ((tty)->termios->c_cc[VLNEXT]) -#define EOL2_CHAR(tty) ((tty)->termios->c_cc[VEOL2]) - -#define _I_FLAG(tty, f) ((tty)->termios->c_iflag & (f)) -#define _O_FLAG(tty, f) ((tty)->termios->c_oflag & (f)) -#define _C_FLAG(tty, f) ((tty)->termios->c_cflag & (f)) -#define _L_FLAG(tty, f) ((tty)->termios->c_lflag & (f)) +#define INTR_CHAR(tty) ((tty)->termios.c_cc[VINTR]) +#define QUIT_CHAR(tty) ((tty)->termios.c_cc[VQUIT]) +#define ERASE_CHAR(tty) ((tty)->termios.c_cc[VERASE]) +#define KILL_CHAR(tty) ((tty)->termios.c_cc[VKILL]) +#define EOF_CHAR(tty) ((tty)->termios.c_cc[VEOF]) +#define TIME_CHAR(tty) ((tty)->termios.c_cc[VTIME]) +#define MIN_CHAR(tty) ((tty)->termios.c_cc[VMIN]) +#define SWTC_CHAR(tty) ((tty)->termios.c_cc[VSWTC]) +#define START_CHAR(tty) ((tty)->termios.c_cc[VSTART]) +#define STOP_CHAR(tty) ((tty)->termios.c_cc[VSTOP]) +#define SUSP_CHAR(tty) ((tty)->termios.c_cc[VSUSP]) +#define EOL_CHAR(tty) ((tty)->termios.c_cc[VEOL]) +#define REPRINT_CHAR(tty) ((tty)->termios.c_cc[VREPRINT]) +#define DISCARD_CHAR(tty) ((tty)->termios.c_cc[VDISCARD]) +#define WERASE_CHAR(tty) ((tty)->termios.c_cc[VWERASE]) +#define LNEXT_CHAR(tty) ((tty)->termios.c_cc[VLNEXT]) +#define EOL2_CHAR(tty) ((tty)->termios.c_cc[VEOL2]) + +#define _I_FLAG(tty, f) ((tty)->termios.c_iflag & (f)) +#define _O_FLAG(tty, f) ((tty)->termios.c_oflag & (f)) +#define _C_FLAG(tty, f) ((tty)->termios.c_cflag & (f)) +#define _L_FLAG(tty, f) ((tty)->termios.c_lflag & (f)) #define I_IGNBRK(tty) _I_FLAG((tty), IGNBRK) #define I_BRKINT(tty) _I_FLAG((tty), BRKINT) @@ -268,10 +269,11 @@ struct tty_struct { struct mutex ldisc_mutex; struct tty_ldisc *ldisc; + struct mutex legacy_mutex; struct mutex termios_mutex; spinlock_t ctrl_lock; /* Termios values are protected by the termios mutex */ - struct ktermios *termios, *termios_locked; + struct ktermios termios, termios_locked; struct termiox *termiox; /* May be NULL for unsupported */ char name[64]; struct pid *pgrp; /* Protected by ctrl lock */ @@ -410,6 +412,10 @@ extern int tty_register_driver(struct tty_driver *driver); extern int tty_unregister_driver(struct tty_driver *driver); extern struct device *tty_register_device(struct tty_driver *driver, unsigned index, struct device *dev); +extern struct device *tty_register_device_attr(struct tty_driver *driver, + unsigned index, struct device *device, + void *drvdata, + const struct attribute_group **attr_grp); extern void tty_unregister_device(struct tty_driver *driver, unsigned index); extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp, int buflen); @@ -423,7 +429,6 @@ extern void tty_unthrottle(struct tty_struct *tty); extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws); extern void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty); -extern void tty_shutdown(struct tty_struct *tty); extern void tty_free_termios(struct tty_struct *tty); extern int is_current_pgrp_orphaned(void); extern struct pid *tty_get_pgrp(struct tty_struct *tty); @@ -497,6 +502,15 @@ extern int tty_write_lock(struct tty_struct *tty, int ndelay); #define tty_is_writelocked(tty) (mutex_is_locked(&tty->atomic_write_lock)) extern void tty_port_init(struct tty_port *port); +extern void tty_port_link_device(struct tty_port *port, + struct tty_driver *driver, unsigned index); +extern struct device *tty_port_register_device(struct tty_port *port, + struct tty_driver *driver, unsigned index, + struct device *device); +extern struct device *tty_port_register_device_attr(struct tty_port *port, + struct tty_driver *driver, unsigned index, + struct device *device, void *drvdata, + const struct attribute_group **attr_grp); extern int tty_port_alloc_xmit_buf(struct tty_port *port); extern void tty_port_free_xmit_buf(struct tty_port *port); extern void tty_port_put(struct tty_port *port); @@ -508,6 +522,12 @@ static inline struct tty_port *tty_port_get(struct tty_port *port) return port; } +/* If the cts flow control is enabled, return true. */ +static inline bool tty_port_cts_enabled(struct tty_port *port) +{ + return port->flags & ASYNC_CTS_FLOW; +} + extern struct tty_struct *tty_port_tty_get(struct tty_port *port); extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty); extern int tty_port_carrier_raised(struct tty_port *port); @@ -521,6 +541,8 @@ extern int tty_port_close_start(struct tty_port *port, extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty); extern void tty_port_close(struct tty_port *port, struct tty_struct *tty, struct file *filp); +extern int tty_port_install(struct tty_port *port, struct tty_driver *driver, + struct tty_struct *tty); extern int tty_port_open(struct tty_port *port, struct tty_struct *tty, struct file *filp); static inline int tty_port_users(struct tty_port *port) @@ -605,8 +627,12 @@ extern long vt_compat_ioctl(struct tty_struct *tty, /* tty_mutex.c */ /* functions for preparation of BKL removal */ -extern void __lockfunc tty_lock(void) __acquires(tty_lock); -extern void __lockfunc tty_unlock(void) __releases(tty_lock); +extern void __lockfunc tty_lock(struct tty_struct *tty); +extern void __lockfunc tty_unlock(struct tty_struct *tty); +extern void __lockfunc tty_lock_pair(struct tty_struct *tty, + struct tty_struct *tty2); +extern void __lockfunc tty_unlock_pair(struct tty_struct *tty, + struct tty_struct *tty2); /* * this shall be called only from where BTM is held (like close) @@ -621,9 +647,9 @@ extern void __lockfunc tty_unlock(void) __releases(tty_lock); static inline void tty_wait_until_sent_from_close(struct tty_struct *tty, long timeout) { - tty_unlock(); /* tty->ops->close holds the BTM, drop it while waiting */ + tty_unlock(tty); /* tty->ops->close holds the BTM, drop it while waiting */ tty_wait_until_sent(tty, timeout); - tty_lock(); + tty_lock(tty); } /* @@ -638,16 +664,16 @@ static inline void tty_wait_until_sent_from_close(struct tty_struct *tty, * * Do not use in new code. */ -#define wait_event_interruptible_tty(wq, condition) \ +#define wait_event_interruptible_tty(tty, wq, condition) \ ({ \ int __ret = 0; \ if (!(condition)) { \ - __wait_event_interruptible_tty(wq, condition, __ret); \ + __wait_event_interruptible_tty(tty, wq, condition, __ret); \ } \ __ret; \ }) -#define __wait_event_interruptible_tty(wq, condition, ret) \ +#define __wait_event_interruptible_tty(tty, wq, condition, ret) \ do { \ DEFINE_WAIT(__wait); \ \ @@ -656,9 +682,9 @@ do { \ if (condition) \ break; \ if (!signal_pending(current)) { \ - tty_unlock(); \ + tty_unlock(tty); \ schedule(); \ - tty_lock(); \ + tty_lock(tty); \ continue; \ } \ ret = -ERESTARTSYS; \ diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 6e6dbb7447b6..dd976cfb6131 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -45,14 +45,9 @@ * * void (*shutdown)(struct tty_struct * tty); * - * This routine is called synchronously when a particular tty device - * is closed for the last time freeing up the resources. - * Note that tty_shutdown() is not called if ops->shutdown is defined. - * This means one is responsible to take care of calling ops->remove (e.g. - * via tty_driver_remove_tty) and releasing tty->termios. - * Note that this hook may be called from *all* the contexts where one - * uses tty refcounting (e.g. tty_port_tty_get). - * + * This routine is called under the tty lock when a particular tty device + * is closed for the last time. It executes before the tty resources + * are freed so may execute while another function holds a tty kref. * * void (*cleanup)(struct tty_struct * tty); * @@ -294,18 +289,18 @@ struct tty_operations { struct tty_driver { int magic; /* magic number for this structure */ struct kref kref; /* Reference management */ - struct cdev cdev; + struct cdev *cdevs; struct module *owner; const char *driver_name; const char *name; int name_base; /* offset of printed name */ int major; /* major device number */ int minor_start; /* start of minor device number */ - int num; /* number of devices allocated */ + unsigned int num; /* number of devices allocated */ short type; /* type of tty driver */ short subtype; /* subtype of tty driver */ struct ktermios init_termios; /* Initial termios */ - int flags; /* tty driver flags */ + unsigned long flags; /* tty driver flags */ struct proc_dir_entry *proc_entry; /* /proc fs entry */ struct tty_driver *other; /* only used for the PTY driver */ @@ -313,6 +308,7 @@ struct tty_driver { * Pointer to the tty data structures */ struct tty_struct **ttys; + struct tty_port **ports; struct ktermios **termios; void *driver_state; @@ -326,7 +322,8 @@ struct tty_driver { extern struct list_head tty_drivers; -extern struct tty_driver *__alloc_tty_driver(int lines, struct module *owner); +extern struct tty_driver *__tty_alloc_driver(unsigned int lines, + struct module *owner, unsigned long flags); extern void put_tty_driver(struct tty_driver *driver); extern void tty_set_operations(struct tty_driver *driver, const struct tty_operations *op); @@ -334,7 +331,21 @@ extern struct tty_driver *tty_find_polling_driver(char *name, int *line); extern void tty_driver_kref_put(struct tty_driver *driver); -#define alloc_tty_driver(lines) __alloc_tty_driver(lines, THIS_MODULE) +/* Use TTY_DRIVER_* flags below */ +#define tty_alloc_driver(lines, flags) \ + __tty_alloc_driver(lines, THIS_MODULE, flags) + +/* + * DEPRECATED Do not use this in new code, use tty_alloc_driver instead. + * (And change the return value checks.) + */ +static inline struct tty_driver *alloc_tty_driver(unsigned int lines) +{ + struct tty_driver *ret = tty_alloc_driver(lines, 0); + if (IS_ERR(ret)) + return NULL; + return ret; +} static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d) { @@ -380,6 +391,14 @@ static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d) * the requested timeout to the caller instead of using a simple * on/off interface. * + * TTY_DRIVER_DYNAMIC_ALLOC -- do not allocate structures which are + * needed per line for this driver as it would waste memory. + * The driver will take care. + * + * TTY_DRIVER_UNNUMBERED_NODE -- do not create numbered /dev nodes. In + * other words create /dev/ttyprintk and not /dev/ttyprintk0. + * Applicable only when a driver for a single tty device is + * being allocated. */ #define TTY_DRIVER_INSTALLED 0x0001 #define TTY_DRIVER_RESET_TERMIOS 0x0002 @@ -387,6 +406,8 @@ static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d) #define TTY_DRIVER_DYNAMIC_DEV 0x0008 #define TTY_DRIVER_DEVPTS_MEM 0x0010 #define TTY_DRIVER_HARDWARE_BREAK 0x0020 +#define TTY_DRIVER_DYNAMIC_ALLOC 0x0040 +#define TTY_DRIVER_UNNUMBERED_NODE 0x0080 /* tty driver types */ #define TTY_DRIVER_TYPE_SYSTEM 0x0001 diff --git a/include/linux/tty_flags.h b/include/linux/tty_flags.h new file mode 100644 index 000000000000..eefcb483a2c0 --- /dev/null +++ b/include/linux/tty_flags.h @@ -0,0 +1,78 @@ +#ifndef _LINUX_TTY_FLAGS_H +#define _LINUX_TTY_FLAGS_H + +/* + * Definitions for async_struct (and serial_struct) flags field also + * shared by the tty_port flags structures. + * + * Define ASYNCB_* for convenient use with {test,set,clear}_bit. + */ +#define ASYNCB_HUP_NOTIFY 0 /* Notify getty on hangups and closes + * on the callout port */ +#define ASYNCB_FOURPORT 1 /* Set OU1, OUT2 per AST Fourport settings */ +#define ASYNCB_SAK 2 /* Secure Attention Key (Orange book) */ +#define ASYNCB_SPLIT_TERMIOS 3 /* Separate termios for dialin/callout */ +#define ASYNCB_SPD_HI 4 /* Use 56000 instead of 38400 bps */ +#define ASYNCB_SPD_VHI 5 /* Use 115200 instead of 38400 bps */ +#define ASYNCB_SKIP_TEST 6 /* Skip UART test during autoconfiguration */ +#define ASYNCB_AUTO_IRQ 7 /* Do automatic IRQ during + * autoconfiguration */ +#define ASYNCB_SESSION_LOCKOUT 8 /* Lock out cua opens based on session */ +#define ASYNCB_PGRP_LOCKOUT 9 /* Lock out cua opens based on pgrp */ +#define ASYNCB_CALLOUT_NOHUP 10 /* Don't do hangups for cua device */ +#define ASYNCB_HARDPPS_CD 11 /* Call hardpps when CD goes high */ +#define ASYNCB_SPD_SHI 12 /* Use 230400 instead of 38400 bps */ +#define ASYNCB_LOW_LATENCY 13 /* Request low latency behaviour */ +#define ASYNCB_BUGGY_UART 14 /* This is a buggy UART, skip some safety + * checks. Note: can be dangerous! */ +#define ASYNCB_AUTOPROBE 15 /* Port was autoprobed by PCI or PNP code */ +#define ASYNCB_LAST_USER 15 + +/* Internal flags used only by kernel */ +#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */ +#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */ +#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */ +#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */ +#define ASYNCB_CLOSING 27 /* Serial port is closing */ +#define ASYNCB_CTS_FLOW 26 /* Do CTS flow control */ +#define ASYNCB_CHECK_CD 25 /* i.e., CLOCAL */ +#define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */ +#define ASYNCB_CONS_FLOW 23 /* flow control for console */ +#define ASYNCB_FIRST_KERNEL 22 + +#define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY) +#define ASYNC_SUSPENDED (1U << ASYNCB_SUSPENDED) +#define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT) +#define ASYNC_SAK (1U << ASYNCB_SAK) +#define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS) +#define ASYNC_SPD_HI (1U << ASYNCB_SPD_HI) +#define ASYNC_SPD_VHI (1U << ASYNCB_SPD_VHI) +#define ASYNC_SKIP_TEST (1U << ASYNCB_SKIP_TEST) +#define ASYNC_AUTO_IRQ (1U << ASYNCB_AUTO_IRQ) +#define ASYNC_SESSION_LOCKOUT (1U << ASYNCB_SESSION_LOCKOUT) +#define ASYNC_PGRP_LOCKOUT (1U << ASYNCB_PGRP_LOCKOUT) +#define ASYNC_CALLOUT_NOHUP (1U << ASYNCB_CALLOUT_NOHUP) +#define ASYNC_HARDPPS_CD (1U << ASYNCB_HARDPPS_CD) +#define ASYNC_SPD_SHI (1U << ASYNCB_SPD_SHI) +#define ASYNC_LOW_LATENCY (1U << ASYNCB_LOW_LATENCY) +#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART) +#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE) + +#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1) +#define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \ + ASYNC_LOW_LATENCY) +#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI) +#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI) +#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI) + +#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED) +#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE) +#define ASYNC_BOOT_AUTOCONF (1U << ASYNCB_BOOT_AUTOCONF) +#define ASYNC_CLOSING (1U << ASYNCB_CLOSING) +#define ASYNC_CTS_FLOW (1U << ASYNCB_CTS_FLOW) +#define ASYNC_CHECK_CD (1U << ASYNCB_CHECK_CD) +#define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ) +#define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW) +#define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1)) + +#endif diff --git a/include/net/irda/ircomm_tty.h b/include/net/irda/ircomm_tty.h index 59ba38bc400f..80ffde3bb164 100644 --- a/include/net/irda/ircomm_tty.h +++ b/include/net/irda/ircomm_tty.h @@ -52,21 +52,16 @@ /* Same for payload size. See qos.c for the smallest max data size */ #define IRCOMM_TTY_DATA_UNINITIALISED (64 - IRCOMM_TTY_HDR_UNINITIALISED) -/* Those are really defined in include/linux/serial.h - Jean II */ -#define ASYNC_B_INITIALIZED 31 /* Serial port was initialized */ -#define ASYNC_B_NORMAL_ACTIVE 29 /* Normal device is active */ -#define ASYNC_B_CLOSING 27 /* Serial port is closing */ - /* * IrCOMM TTY driver state */ struct ircomm_tty_cb { irda_queue_t queue; /* Must be first */ + struct tty_port port; magic_t magic; int state; /* Connect state */ - struct tty_struct *tty; struct ircomm_cb *ircomm; /* IrCOMM layer instance */ struct sk_buff *tx_skb; /* Transmit buffer */ @@ -80,7 +75,6 @@ struct ircomm_tty_cb { LOCAL_FLOW flow; /* IrTTP flow status */ int line; - unsigned long flags; __u8 dlsap_sel; __u8 slsap_sel; @@ -97,19 +91,10 @@ struct ircomm_tty_cb { void *skey; void *ckey; - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; struct timer_list watchdog_timer; struct work_struct tqueue; - unsigned short close_delay; - unsigned short closing_wait; /* time to wait before closing */ - - int open_count; - int blocked_open; /* # of blocked opens */ - /* Protect concurent access to : - * o self->open_count * o self->ctrl_skb * o self->tx_skb * Maybe other things may gain to be protected as well... diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h index e1ce1048fe5f..4a045cda9c60 100644 --- a/include/net/netfilter/nf_conntrack_ecache.h +++ b/include/net/netfilter/nf_conntrack_ecache.h @@ -18,6 +18,7 @@ struct nf_conntrack_ecache { u16 ctmask; /* bitmask of ct events to be delivered */ u16 expmask; /* bitmask of expect events to be delivered */ u32 pid; /* netlink pid of destroyer */ + struct timer_list timeout; }; static inline struct nf_conntrack_ecache * diff --git a/mm/mempolicy.c b/mm/mempolicy.c index bd92431d4c49..4ada3be6e252 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -2562,7 +2562,7 @@ int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol, int no_context) break; default: - BUG(); + return -EINVAL; } l = strlen(policy_modes[mode]); diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index 56f182393c4c..ccc248791d50 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -278,8 +278,8 @@ out: if (err < 0) goto free; - dev->tty_dev = tty_register_device(rfcomm_tty_driver, dev->id, NULL); - + dev->tty_dev = tty_port_register_device(&dev->port, rfcomm_tty_driver, + dev->id, NULL); if (IS_ERR(dev->tty_dev)) { err = PTR_ERR(dev->tty_dev); list_del(&dev->list); @@ -705,9 +705,9 @@ static int rfcomm_tty_open(struct tty_struct *tty, struct file *filp) break; } - tty_unlock(); + tty_unlock(tty); schedule(); - tty_lock(); + tty_lock(tty); } set_current_state(TASK_RUNNING); remove_wait_queue(&dev->wait, &wait); @@ -861,7 +861,7 @@ static int rfcomm_tty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned l static void rfcomm_tty_set_termios(struct tty_struct *tty, struct ktermios *old) { - struct ktermios *new = tty->termios; + struct ktermios *new = &tty->termios; int old_baud_rate = tty_termios_baud_rate(old); int new_baud_rate = tty_termios_baud_rate(new); diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 346b1eb83a1f..e4ba3e70c174 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -168,24 +168,16 @@ static void poll_napi(struct net_device *dev) struct napi_struct *napi; int budget = 16; - WARN_ON_ONCE(!irqs_disabled()); - list_for_each_entry(napi, &dev->napi_list, dev_list) { - local_irq_enable(); if (napi->poll_owner != smp_processor_id() && spin_trylock(&napi->poll_lock)) { - rcu_read_lock_bh(); budget = poll_one_napi(rcu_dereference_bh(dev->npinfo), napi, budget); - rcu_read_unlock_bh(); spin_unlock(&napi->poll_lock); - if (!budget) { - local_irq_disable(); + if (!budget) break; - } } - local_irq_disable(); } } diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index 8eec8f4a0536..ebdf06f938bf 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -124,6 +124,8 @@ static DEFINE_SPINLOCK(mfc_unres_lock); static struct kmem_cache *mrt_cachep __read_mostly; static struct mr_table *ipmr_new_table(struct net *net, u32 id); +static void ipmr_free_table(struct mr_table *mrt); + static int ip_mr_forward(struct net *net, struct mr_table *mrt, struct sk_buff *skb, struct mfc_cache *cache, int local); @@ -131,6 +133,7 @@ static int ipmr_cache_report(struct mr_table *mrt, struct sk_buff *pkt, vifi_t vifi, int assert); static int __ipmr_fill_mroute(struct mr_table *mrt, struct sk_buff *skb, struct mfc_cache *c, struct rtmsg *rtm); +static void mroute_clean_tables(struct mr_table *mrt); static void ipmr_expire_process(unsigned long arg); #ifdef CONFIG_IP_MROUTE_MULTIPLE_TABLES @@ -271,7 +274,7 @@ static void __net_exit ipmr_rules_exit(struct net *net) list_for_each_entry_safe(mrt, next, &net->ipv4.mr_tables, list) { list_del(&mrt->list); - kfree(mrt); + ipmr_free_table(mrt); } fib_rules_unregister(net->ipv4.mr_rules_ops); } @@ -299,7 +302,7 @@ static int __net_init ipmr_rules_init(struct net *net) static void __net_exit ipmr_rules_exit(struct net *net) { - kfree(net->ipv4.mrt); + ipmr_free_table(net->ipv4.mrt); } #endif @@ -336,6 +339,13 @@ static struct mr_table *ipmr_new_table(struct net *net, u32 id) return mrt; } +static void ipmr_free_table(struct mr_table *mrt) +{ + del_timer_sync(&mrt->ipmr_expire_timer); + mroute_clean_tables(mrt); + kfree(mrt); +} + /* Service routines creating virtual interfaces: DVMRP tunnels and PIMREG */ static void ipmr_del_tunnel(struct net_device *dev, struct vifctl *v) diff --git a/net/ipv4/netfilter/nf_nat_sip.c b/net/ipv4/netfilter/nf_nat_sip.c index 4ad9cf173992..9c87cde28ff8 100644 --- a/net/ipv4/netfilter/nf_nat_sip.c +++ b/net/ipv4/netfilter/nf_nat_sip.c @@ -502,7 +502,10 @@ static unsigned int ip_nat_sdp_media(struct sk_buff *skb, unsigned int dataoff, ret = nf_ct_expect_related(rtcp_exp); if (ret == 0) break; - else if (ret != -EBUSY) { + else if (ret == -EBUSY) { + nf_ct_unexpect_related(rtp_exp); + continue; + } else if (ret < 0) { nf_ct_unexpect_related(rtp_exp); port = 0; break; diff --git a/net/ipv4/route.c b/net/ipv4/route.c index fd9ecb52c66b..82cf2a722b23 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -934,12 +934,14 @@ static u32 __ip_rt_update_pmtu(struct rtable *rt, struct flowi4 *fl4, u32 mtu) if (mtu < ip_rt_min_pmtu) mtu = ip_rt_min_pmtu; + rcu_read_lock(); if (fib_lookup(dev_net(rt->dst.dev), fl4, &res) == 0) { struct fib_nh *nh = &FIB_RES_NH(res); update_or_create_fnhe(nh, fl4->daddr, 0, mtu, jiffies + ip_rt_mtu_expires); } + rcu_read_unlock(); return mtu; } @@ -956,7 +958,7 @@ static void ip_rt_update_pmtu(struct dst_entry *dst, struct sock *sk, dst->obsolete = DST_OBSOLETE_KILL; } else { rt->rt_pmtu = mtu; - dst_set_expires(&rt->dst, ip_rt_mtu_expires); + rt->dst.expires = max(1UL, jiffies + ip_rt_mtu_expires); } } @@ -1263,7 +1265,7 @@ static void ipv4_dst_destroy(struct dst_entry *dst) { struct rtable *rt = (struct rtable *) dst; - if (dst->flags & DST_NOCACHE) { + if (!list_empty(&rt->rt_uncached)) { spin_lock_bh(&rt_uncached_lock); list_del(&rt->rt_uncached); spin_unlock_bh(&rt_uncached_lock); diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 85308b90df80..6e38c6c23caa 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -2926,13 +2926,14 @@ static void tcp_enter_recovery(struct sock *sk, bool ece_ack) * tcp_xmit_retransmit_queue(). */ static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked, - int newly_acked_sacked, bool is_dupack, + int prior_sacked, bool is_dupack, int flag) { struct inet_connection_sock *icsk = inet_csk(sk); struct tcp_sock *tp = tcp_sk(sk); int do_lost = is_dupack || ((flag & FLAG_DATA_SACKED) && (tcp_fackets_out(tp) > tp->reordering)); + int newly_acked_sacked = 0; int fast_rexmit = 0; if (WARN_ON(!tp->packets_out && tp->sacked_out)) @@ -2992,6 +2993,7 @@ static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked, tcp_add_reno_sack(sk); } else do_lost = tcp_try_undo_partial(sk, pkts_acked); + newly_acked_sacked = pkts_acked + tp->sacked_out - prior_sacked; break; case TCP_CA_Loss: if (flag & FLAG_DATA_ACKED) @@ -3013,6 +3015,7 @@ static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked, if (is_dupack) tcp_add_reno_sack(sk); } + newly_acked_sacked = pkts_acked + tp->sacked_out - prior_sacked; if (icsk->icsk_ca_state <= TCP_CA_Disorder) tcp_try_undo_dsack(sk); @@ -3590,7 +3593,6 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) int prior_packets; int prior_sacked = tp->sacked_out; int pkts_acked = 0; - int newly_acked_sacked = 0; bool frto_cwnd = false; /* If the ack is older than previous acks @@ -3666,8 +3668,6 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) flag |= tcp_clean_rtx_queue(sk, prior_fackets, prior_snd_una); pkts_acked = prior_packets - tp->packets_out; - newly_acked_sacked = (prior_packets - prior_sacked) - - (tp->packets_out - tp->sacked_out); if (tp->frto_counter) frto_cwnd = tcp_process_frto(sk, flag); @@ -3681,7 +3681,7 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) tcp_may_raise_cwnd(sk, flag)) tcp_cong_avoid(sk, ack, prior_in_flight); is_dupack = !(flag & (FLAG_SND_UNA_ADVANCED | FLAG_NOT_DUP)); - tcp_fastretrans_alert(sk, pkts_acked, newly_acked_sacked, + tcp_fastretrans_alert(sk, pkts_acked, prior_sacked, is_dupack, flag); } else { if ((flag & FLAG_DATA_ACKED) && !frto_cwnd) @@ -3698,7 +3698,7 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) no_queue: /* If data was DSACKed, see if we can undo a cwnd reduction. */ if (flag & FLAG_DSACKING_ACK) - tcp_fastretrans_alert(sk, pkts_acked, newly_acked_sacked, + tcp_fastretrans_alert(sk, pkts_acked, prior_sacked, is_dupack, flag); /* If this ack opens up a zero window, clear backoff. It was * being used to time the probes, and is probably far higher than @@ -3718,8 +3718,7 @@ old_ack: */ if (TCP_SKB_CB(skb)->sacked) { flag |= tcp_sacktag_write_queue(sk, skb, prior_snd_una); - newly_acked_sacked = tp->sacked_out - prior_sacked; - tcp_fastretrans_alert(sk, pkts_acked, newly_acked_sacked, + tcp_fastretrans_alert(sk, pkts_acked, prior_sacked, is_dupack, flag); } diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c index 6dc7fd353ef5..282f3723ee19 100644 --- a/net/ipv6/esp6.c +++ b/net/ipv6/esp6.c @@ -167,8 +167,6 @@ static int esp6_output(struct xfrm_state *x, struct sk_buff *skb) struct esp_data *esp = x->data; /* skb is pure payload to encrypt */ - err = -ENOMEM; - aead = esp->aead; alen = crypto_aead_authsize(aead); @@ -203,8 +201,10 @@ static int esp6_output(struct xfrm_state *x, struct sk_buff *skb) } tmp = esp_alloc_tmp(aead, nfrags + sglists, seqhilen); - if (!tmp) + if (!tmp) { + err = -ENOMEM; goto error; + } seqhi = esp_tmp_seqhi(tmp); iv = esp_tmp_iv(aead, tmp, seqhilen); diff --git a/net/irda/ircomm/ircomm_param.c b/net/irda/ircomm/ircomm_param.c index 8b915f3ac3b9..308939128359 100644 --- a/net/irda/ircomm/ircomm_param.c +++ b/net/irda/ircomm/ircomm_param.c @@ -99,7 +99,6 @@ pi_param_info_t ircomm_param_info = { pi_major_call_table, 3, 0x0f, 4 }; */ int ircomm_param_request(struct ircomm_tty_cb *self, __u8 pi, int flush) { - struct tty_struct *tty; unsigned long flags; struct sk_buff *skb; int count; @@ -109,10 +108,6 @@ int ircomm_param_request(struct ircomm_tty_cb *self, __u8 pi, int flush) IRDA_ASSERT(self != NULL, return -1;); IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - tty = self->tty; - if (!tty) - return 0; - /* Make sure we don't send parameters for raw mode */ if (self->service_type == IRCOMM_3_WIRE_RAW) return 0; diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c index 6b9d5a0e42f9..95a3a7a336ba 100644 --- a/net/irda/ircomm/ircomm_tty.c +++ b/net/irda/ircomm/ircomm_tty.c @@ -52,6 +52,8 @@ #include <net/irda/ircomm_tty_attach.h> #include <net/irda/ircomm_tty.h> +static int ircomm_tty_install(struct tty_driver *driver, + struct tty_struct *tty); static int ircomm_tty_open(struct tty_struct *tty, struct file *filp); static void ircomm_tty_close(struct tty_struct * tty, struct file *filp); static int ircomm_tty_write(struct tty_struct * tty, @@ -82,6 +84,7 @@ static struct tty_driver *driver; static hashbin_t *ircomm_tty = NULL; static const struct tty_operations ops = { + .install = ircomm_tty_install, .open = ircomm_tty_open, .close = ircomm_tty_close, .write = ircomm_tty_write, @@ -104,6 +107,35 @@ static const struct tty_operations ops = { #endif /* CONFIG_PROC_FS */ }; +static void ircomm_port_raise_dtr_rts(struct tty_port *port, int raise) +{ + struct ircomm_tty_cb *self = container_of(port, struct ircomm_tty_cb, + port); + /* + * Here, we use to lock those two guys, but as ircomm_param_request() + * does it itself, I don't see the point (and I see the deadlock). + * Jean II + */ + if (raise) + self->settings.dte |= IRCOMM_RTS | IRCOMM_DTR; + else + self->settings.dte &= ~(IRCOMM_RTS | IRCOMM_DTR); + + ircomm_param_request(self, IRCOMM_DTE, TRUE); +} + +static int ircomm_port_carrier_raised(struct tty_port *port) +{ + struct ircomm_tty_cb *self = container_of(port, struct ircomm_tty_cb, + port); + return self->settings.dce & IRCOMM_CD; +} + +static const struct tty_port_operations ircomm_port_ops = { + .dtr_rts = ircomm_port_raise_dtr_rts, + .carrier_raised = ircomm_port_carrier_raised, +}; + /* * Function ircomm_tty_init() * @@ -194,7 +226,7 @@ static int ircomm_tty_startup(struct ircomm_tty_cb *self) IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); /* Check if already open */ - if (test_and_set_bit(ASYNC_B_INITIALIZED, &self->flags)) { + if (test_and_set_bit(ASYNCB_INITIALIZED, &self->port.flags)) { IRDA_DEBUG(2, "%s(), already open so break out!\n", __func__ ); return 0; } @@ -231,7 +263,7 @@ static int ircomm_tty_startup(struct ircomm_tty_cb *self) return 0; err: - clear_bit(ASYNC_B_INITIALIZED, &self->flags); + clear_bit(ASYNCB_INITIALIZED, &self->port.flags); return ret; } @@ -242,72 +274,62 @@ err: * */ static int ircomm_tty_block_til_ready(struct ircomm_tty_cb *self, - struct file *filp) + struct tty_struct *tty, struct file *filp) { + struct tty_port *port = &self->port; DECLARE_WAITQUEUE(wait, current); int retval; int do_clocal = 0, extra_count = 0; unsigned long flags; - struct tty_struct *tty; IRDA_DEBUG(2, "%s()\n", __func__ ); - tty = self->tty; - /* * If non-blocking mode is set, or the port is not enabled, * then make the check up front and then exit. */ if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ /* nonblock mode is set or port is not enabled */ - self->flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; IRDA_DEBUG(1, "%s(), O_NONBLOCK requested!\n", __func__ ); return 0; } - if (tty->termios->c_cflag & CLOCAL) { + if (tty->termios.c_cflag & CLOCAL) { IRDA_DEBUG(1, "%s(), doing CLOCAL!\n", __func__ ); do_clocal = 1; } /* Wait for carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, self->open_count is dropped by one, so that + * this loop, port->count is dropped by one, so that * mgsl_close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&self->open_wait, &wait); + add_wait_queue(&port->open_wait, &wait); IRDA_DEBUG(2, "%s(%d):block_til_ready before block on %s open_count=%d\n", - __FILE__,__LINE__, tty->driver->name, self->open_count ); + __FILE__, __LINE__, tty->driver->name, port->count); - /* As far as I can see, we protect open_count - Jean II */ - spin_lock_irqsave(&self->spinlock, flags); + spin_lock_irqsave(&port->lock, flags); if (!tty_hung_up_p(filp)) { extra_count = 1; - self->open_count--; + port->count--; } - spin_unlock_irqrestore(&self->spinlock, flags); - self->blocked_open++; + spin_unlock_irqrestore(&port->lock, flags); + port->blocked_open++; while (1) { - if (tty->termios->c_cflag & CBAUD) { - /* Here, we use to lock those two guys, but - * as ircomm_param_request() does it itself, - * I don't see the point (and I see the deadlock). - * Jean II */ - self->settings.dte |= IRCOMM_RTS + IRCOMM_DTR; - - ircomm_param_request(self, IRCOMM_DTE, TRUE); - } + if (tty->termios.c_cflag & CBAUD) + tty_port_raise_dtr_rts(port); current->state = TASK_INTERRUPTIBLE; if (tty_hung_up_p(filp) || - !test_bit(ASYNC_B_INITIALIZED, &self->flags)) { - retval = (self->flags & ASYNC_HUP_NOTIFY) ? + !test_bit(ASYNCB_INITIALIZED, &port->flags)) { + retval = (port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS; break; } @@ -317,8 +339,8 @@ static int ircomm_tty_block_til_ready(struct ircomm_tty_cb *self, * specified, we cannot return before the IrCOMM link is * ready */ - if (!test_bit(ASYNC_B_CLOSING, &self->flags) && - (do_clocal || (self->settings.dce & IRCOMM_CD)) && + if (!test_bit(ASYNCB_CLOSING, &port->flags) && + (do_clocal || tty_port_carrier_raised(port)) && self->state == IRCOMM_TTY_READY) { break; @@ -330,46 +352,36 @@ static int ircomm_tty_block_til_ready(struct ircomm_tty_cb *self, } IRDA_DEBUG(1, "%s(%d):block_til_ready blocking on %s open_count=%d\n", - __FILE__,__LINE__, tty->driver->name, self->open_count ); + __FILE__, __LINE__, tty->driver->name, port->count); schedule(); } __set_current_state(TASK_RUNNING); - remove_wait_queue(&self->open_wait, &wait); + remove_wait_queue(&port->open_wait, &wait); if (extra_count) { /* ++ is not atomic, so this should be protected - Jean II */ - spin_lock_irqsave(&self->spinlock, flags); - self->open_count++; - spin_unlock_irqrestore(&self->spinlock, flags); + spin_lock_irqsave(&port->lock, flags); + port->count++; + spin_unlock_irqrestore(&port->lock, flags); } - self->blocked_open--; + port->blocked_open--; IRDA_DEBUG(1, "%s(%d):block_til_ready after blocking on %s open_count=%d\n", - __FILE__,__LINE__, tty->driver->name, self->open_count); + __FILE__, __LINE__, tty->driver->name, port->count); if (!retval) - self->flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return retval; } -/* - * Function ircomm_tty_open (tty, filp) - * - * This routine is called when a particular tty device is opened. This - * routine is mandatory; if this routine is not filled in, the attempted - * open will fail with ENODEV. - */ -static int ircomm_tty_open(struct tty_struct *tty, struct file *filp) + +static int ircomm_tty_install(struct tty_driver *driver, struct tty_struct *tty) { struct ircomm_tty_cb *self; unsigned int line = tty->index; - unsigned long flags; - int ret; - - IRDA_DEBUG(2, "%s()\n", __func__ ); /* Check if instance already exists */ self = hashbin_lock_find(ircomm_tty, line, NULL); @@ -381,6 +393,8 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp) return -ENOMEM; } + tty_port_init(&self->port); + self->port.ops = &ircomm_port_ops; self->magic = IRCOMM_TTY_MAGIC; self->flow = FLOW_STOP; @@ -388,13 +402,9 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp) INIT_WORK(&self->tqueue, ircomm_tty_do_softint); self->max_header_size = IRCOMM_TTY_HDR_UNINITIALISED; self->max_data_size = IRCOMM_TTY_DATA_UNINITIALISED; - self->close_delay = 5*HZ/10; - self->closing_wait = 30*HZ; /* Init some important stuff */ init_timer(&self->watchdog_timer); - init_waitqueue_head(&self->open_wait); - init_waitqueue_head(&self->close_wait); spin_lock_init(&self->spinlock); /* @@ -404,31 +414,48 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp) * * Note this is completely usafe and doesn't work properly */ - tty->termios->c_iflag = 0; - tty->termios->c_oflag = 0; + tty->termios.c_iflag = 0; + tty->termios.c_oflag = 0; /* Insert into hash */ hashbin_insert(ircomm_tty, (irda_queue_t *) self, line, NULL); } - /* ++ is not atomic, so this should be protected - Jean II */ - spin_lock_irqsave(&self->spinlock, flags); - self->open_count++; - tty->driver_data = self; - self->tty = tty; - spin_unlock_irqrestore(&self->spinlock, flags); + return tty_port_install(&self->port, driver, tty); +} + +/* + * Function ircomm_tty_open (tty, filp) + * + * This routine is called when a particular tty device is opened. This + * routine is mandatory; if this routine is not filled in, the attempted + * open will fail with ENODEV. + */ +static int ircomm_tty_open(struct tty_struct *tty, struct file *filp) +{ + struct ircomm_tty_cb *self = tty->driver_data; + unsigned long flags; + int ret; + + IRDA_DEBUG(2, "%s()\n", __func__ ); + + /* ++ is not atomic, so this should be protected - Jean II */ + spin_lock_irqsave(&self->port.lock, flags); + self->port.count++; + spin_unlock_irqrestore(&self->port.lock, flags); + tty_port_tty_set(&self->port, tty); IRDA_DEBUG(1, "%s(), %s%d, count = %d\n", __func__ , tty->driver->name, - self->line, self->open_count); + self->line, self->port.count); /* Not really used by us, but lets do it anyway */ - self->tty->low_latency = (self->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + tty->low_latency = (self->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; /* * If the port is the middle of closing, bail out now */ if (tty_hung_up_p(filp) || - test_bit(ASYNC_B_CLOSING, &self->flags)) { + test_bit(ASYNCB_CLOSING, &self->port.flags)) { /* Hm, why are we blocking on ASYNC_CLOSING if we * do return -EAGAIN/-ERESTARTSYS below anyway? @@ -438,14 +465,15 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp) * probably better sleep uninterruptible? */ - if (wait_event_interruptible(self->close_wait, !test_bit(ASYNC_B_CLOSING, &self->flags))) { + if (wait_event_interruptible(self->port.close_wait, + !test_bit(ASYNCB_CLOSING, &self->port.flags))) { IRDA_WARNING("%s - got signal while blocking on ASYNC_CLOSING!\n", __func__); return -ERESTARTSYS; } #ifdef SERIAL_DO_RESTART - return (self->flags & ASYNC_HUP_NOTIFY) ? + return (self->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS; #else return -EAGAIN; @@ -453,7 +481,7 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp) } /* Check if this is a "normal" ircomm device, or an irlpt device */ - if (line < 0x10) { + if (self->line < 0x10) { self->service_type = IRCOMM_3_WIRE | IRCOMM_9_WIRE; self->settings.service_type = IRCOMM_9_WIRE; /* 9 wire as default */ /* Jan Kiszka -> add DSR/RI -> Conform to IrCOMM spec */ @@ -469,7 +497,7 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp) if (ret) return ret; - ret = ircomm_tty_block_til_ready(self, filp); + ret = ircomm_tty_block_til_ready(self, tty, filp); if (ret) { IRDA_DEBUG(2, "%s(), returning after block_til_ready with %d\n", __func__ , @@ -489,81 +517,22 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp) static void ircomm_tty_close(struct tty_struct *tty, struct file *filp) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; - unsigned long flags; + struct tty_port *port = &self->port; IRDA_DEBUG(0, "%s()\n", __func__ ); IRDA_ASSERT(self != NULL, return;); IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - spin_lock_irqsave(&self->spinlock, flags); - - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&self->spinlock, flags); - - IRDA_DEBUG(0, "%s(), returning 1\n", __func__ ); - return; - } - - if ((tty->count == 1) && (self->open_count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. state->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - IRDA_DEBUG(0, "%s(), bad serial port count; " - "tty->count is 1, state->count is %d\n", __func__ , - self->open_count); - self->open_count = 1; - } - - if (--self->open_count < 0) { - IRDA_ERROR("%s(), bad serial port count for ttys%d: %d\n", - __func__, self->line, self->open_count); - self->open_count = 0; - } - if (self->open_count) { - spin_unlock_irqrestore(&self->spinlock, flags); - - IRDA_DEBUG(0, "%s(), open count > 0\n", __func__ ); + if (tty_port_close_start(port, tty, filp) == 0) return; - } - - /* Hum... Should be test_and_set_bit ??? - Jean II */ - set_bit(ASYNC_B_CLOSING, &self->flags); - - /* We need to unlock here (we were unlocking at the end of this - * function), because tty_wait_until_sent() may schedule. - * I don't know if the rest should be protected somehow, - * so someone should check. - Jean II */ - spin_unlock_irqrestore(&self->spinlock, flags); - - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (self->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent_from_close(tty, self->closing_wait); ircomm_tty_shutdown(self); tty_driver_flush_buffer(tty); - tty_ldisc_flush(tty); - - tty->closing = 0; - self->tty = NULL; - if (self->blocked_open) { - if (self->close_delay) - schedule_timeout_interruptible(self->close_delay); - wake_up_interruptible(&self->open_wait); - } - - self->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&self->close_wait); + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); } /* @@ -606,7 +575,7 @@ static void ircomm_tty_do_softint(struct work_struct *work) if (!self || self->magic != IRCOMM_TTY_MAGIC) return; - tty = self->tty; + tty = tty_port_tty_get(&self->port); if (!tty) return; @@ -627,7 +596,7 @@ static void ircomm_tty_do_softint(struct work_struct *work) } if (tty->hw_stopped) - return; + goto put; /* Unlink transmit buffer */ spin_lock_irqsave(&self->spinlock, flags); @@ -646,6 +615,8 @@ static void ircomm_tty_do_softint(struct work_struct *work) /* Check if user (still) wants to be waken up */ tty_wakeup(tty); +put: + tty_kref_put(tty); } /* @@ -880,7 +851,7 @@ static void ircomm_tty_throttle(struct tty_struct *tty) ircomm_tty_send_xchar(tty, STOP_CHAR(tty)); /* Hardware flow control? */ - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { self->settings.dte &= ~IRCOMM_RTS; self->settings.dte |= IRCOMM_DELTA_RTS; @@ -912,7 +883,7 @@ static void ircomm_tty_unthrottle(struct tty_struct *tty) } /* Using hardware flow control? */ - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { self->settings.dte |= (IRCOMM_RTS|IRCOMM_DELTA_RTS); ircomm_param_request(self, IRCOMM_DTE, TRUE); @@ -955,7 +926,7 @@ static void ircomm_tty_shutdown(struct ircomm_tty_cb *self) IRDA_DEBUG(0, "%s()\n", __func__ ); - if (!test_and_clear_bit(ASYNC_B_INITIALIZED, &self->flags)) + if (!test_and_clear_bit(ASYNCB_INITIALIZED, &self->port.flags)) return; ircomm_tty_detach_cable(self); @@ -994,6 +965,7 @@ static void ircomm_tty_shutdown(struct ircomm_tty_cb *self) static void ircomm_tty_hangup(struct tty_struct *tty) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; + struct tty_port *port = &self->port; unsigned long flags; IRDA_DEBUG(0, "%s()\n", __func__ ); @@ -1004,14 +976,17 @@ static void ircomm_tty_hangup(struct tty_struct *tty) /* ircomm_tty_flush_buffer(tty); */ ircomm_tty_shutdown(self); - /* I guess we need to lock here - Jean II */ - spin_lock_irqsave(&self->spinlock, flags); - self->flags &= ~ASYNC_NORMAL_ACTIVE; - self->tty = NULL; - self->open_count = 0; - spin_unlock_irqrestore(&self->spinlock, flags); + spin_lock_irqsave(&port->lock, flags); + port->flags &= ~ASYNC_NORMAL_ACTIVE; + if (port->tty) { + set_bit(TTY_IO_ERROR, &port->tty->flags); + tty_kref_put(port->tty); + } + port->tty = NULL; + port->count = 0; + spin_unlock_irqrestore(&port->lock, flags); - wake_up_interruptible(&self->open_wait); + wake_up_interruptible(&port->open_wait); } /* @@ -1071,20 +1046,20 @@ void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self) IRDA_ASSERT(self != NULL, return;); IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - tty = self->tty; + tty = tty_port_tty_get(&self->port); status = self->settings.dce; if (status & IRCOMM_DCE_DELTA_ANY) { /*wake_up_interruptible(&self->delta_msr_wait);*/ } - if ((self->flags & ASYNC_CHECK_CD) && (status & IRCOMM_DELTA_CD)) { + if ((self->port.flags & ASYNC_CHECK_CD) && (status & IRCOMM_DELTA_CD)) { IRDA_DEBUG(2, "%s(), ircomm%d CD now %s...\n", __func__ , self->line, (status & IRCOMM_CD) ? "on" : "off"); if (status & IRCOMM_CD) { - wake_up_interruptible(&self->open_wait); + wake_up_interruptible(&self->port.open_wait); } else { IRDA_DEBUG(2, "%s(), Doing serial hangup..\n", __func__ ); @@ -1092,10 +1067,10 @@ void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self) tty_hangup(tty); /* Hangup will remote the tty, so better break out */ - return; + goto put; } } - if (self->flags & ASYNC_CTS_FLOW) { + if (tty && tty_port_cts_enabled(&self->port)) { if (tty->hw_stopped) { if (status & IRCOMM_CTS) { IRDA_DEBUG(2, @@ -1103,10 +1078,10 @@ void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self) tty->hw_stopped = 0; /* Wake up processes blocked on open */ - wake_up_interruptible(&self->open_wait); + wake_up_interruptible(&self->port.open_wait); schedule_work(&self->tqueue); - return; + goto put; } } else { if (!(status & IRCOMM_CTS)) { @@ -1116,6 +1091,8 @@ void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self) } } } +put: + tty_kref_put(tty); } /* @@ -1128,6 +1105,7 @@ static int ircomm_tty_data_indication(void *instance, void *sap, struct sk_buff *skb) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + struct tty_struct *tty; IRDA_DEBUG(2, "%s()\n", __func__ ); @@ -1135,7 +1113,8 @@ static int ircomm_tty_data_indication(void *instance, void *sap, IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); IRDA_ASSERT(skb != NULL, return -1;); - if (!self->tty) { + tty = tty_port_tty_get(&self->port); + if (!tty) { IRDA_DEBUG(0, "%s(), no tty!\n", __func__ ); return 0; } @@ -1146,7 +1125,7 @@ static int ircomm_tty_data_indication(void *instance, void *sap, * Devices like WinCE can do this, and since they don't send any * params, we can just as well declare the hardware for running. */ - if (self->tty->hw_stopped && (self->flow == FLOW_START)) { + if (tty->hw_stopped && (self->flow == FLOW_START)) { IRDA_DEBUG(0, "%s(), polling for line settings!\n", __func__ ); ircomm_param_request(self, IRCOMM_POLL, TRUE); @@ -1159,8 +1138,9 @@ static int ircomm_tty_data_indication(void *instance, void *sap, * Use flip buffer functions since the code may be called from interrupt * context */ - tty_insert_flip_string(self->tty, skb->data, skb->len); - tty_flip_buffer_push(self->tty); + tty_insert_flip_string(tty, skb->data, skb->len); + tty_flip_buffer_push(tty); + tty_kref_put(tty); /* No need to kfree_skb - see ircomm_ttp_data_indication() */ @@ -1211,12 +1191,13 @@ static void ircomm_tty_flow_indication(void *instance, void *sap, IRDA_ASSERT(self != NULL, return;); IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - tty = self->tty; + tty = tty_port_tty_get(&self->port); switch (cmd) { case FLOW_START: IRDA_DEBUG(2, "%s(), hw start!\n", __func__ ); - tty->hw_stopped = 0; + if (tty) + tty->hw_stopped = 0; /* ircomm_tty_do_softint will take care of the rest */ schedule_work(&self->tqueue); @@ -1224,15 +1205,19 @@ static void ircomm_tty_flow_indication(void *instance, void *sap, default: /* If we get here, something is very wrong, better stop */ case FLOW_STOP: IRDA_DEBUG(2, "%s(), hw stopped!\n", __func__ ); - tty->hw_stopped = 1; + if (tty) + tty->hw_stopped = 1; break; } + + tty_kref_put(tty); self->flow = cmd; } #ifdef CONFIG_PROC_FS static void ircomm_tty_line_info(struct ircomm_tty_cb *self, struct seq_file *m) { + struct tty_struct *tty; char sep; seq_printf(m, "State: %s\n", ircomm_tty_state[self->state]); @@ -1328,40 +1313,43 @@ static void ircomm_tty_line_info(struct ircomm_tty_cb *self, struct seq_file *m) seq_puts(m, "Flags:"); sep = ' '; - if (self->flags & ASYNC_CTS_FLOW) { + if (tty_port_cts_enabled(&self->port)) { seq_printf(m, "%cASYNC_CTS_FLOW", sep); sep = '|'; } - if (self->flags & ASYNC_CHECK_CD) { + if (self->port.flags & ASYNC_CHECK_CD) { seq_printf(m, "%cASYNC_CHECK_CD", sep); sep = '|'; } - if (self->flags & ASYNC_INITIALIZED) { + if (self->port.flags & ASYNC_INITIALIZED) { seq_printf(m, "%cASYNC_INITIALIZED", sep); sep = '|'; } - if (self->flags & ASYNC_LOW_LATENCY) { + if (self->port.flags & ASYNC_LOW_LATENCY) { seq_printf(m, "%cASYNC_LOW_LATENCY", sep); sep = '|'; } - if (self->flags & ASYNC_CLOSING) { + if (self->port.flags & ASYNC_CLOSING) { seq_printf(m, "%cASYNC_CLOSING", sep); sep = '|'; } - if (self->flags & ASYNC_NORMAL_ACTIVE) { + if (self->port.flags & ASYNC_NORMAL_ACTIVE) { seq_printf(m, "%cASYNC_NORMAL_ACTIVE", sep); sep = '|'; } seq_putc(m, '\n'); seq_printf(m, "Role: %s\n", self->client ? "client" : "server"); - seq_printf(m, "Open count: %d\n", self->open_count); + seq_printf(m, "Open count: %d\n", self->port.count); seq_printf(m, "Max data size: %d\n", self->max_data_size); seq_printf(m, "Max header size: %d\n", self->max_header_size); - if (self->tty) + tty = tty_port_tty_get(&self->port); + if (tty) { seq_printf(m, "Hardware: %s\n", - self->tty->hw_stopped ? "Stopped" : "Running"); + tty->hw_stopped ? "Stopped" : "Running"); + tty_kref_put(tty); + } } static int ircomm_tty_proc_show(struct seq_file *m, void *v) diff --git a/net/irda/ircomm/ircomm_tty_attach.c b/net/irda/ircomm/ircomm_tty_attach.c index b65d66e0d817..edab393e0c82 100644 --- a/net/irda/ircomm/ircomm_tty_attach.c +++ b/net/irda/ircomm/ircomm_tty_attach.c @@ -130,6 +130,8 @@ static int (*state[])(struct ircomm_tty_cb *self, IRCOMM_TTY_EVENT event, */ int ircomm_tty_attach_cable(struct ircomm_tty_cb *self) { + struct tty_struct *tty; + IRDA_DEBUG(0, "%s()\n", __func__ ); IRDA_ASSERT(self != NULL, return -1;); @@ -142,7 +144,11 @@ int ircomm_tty_attach_cable(struct ircomm_tty_cb *self) } /* Make sure nobody tries to write before the link is up */ - self->tty->hw_stopped = 1; + tty = tty_port_tty_get(&self->port); + if (tty) { + tty->hw_stopped = 1; + tty_kref_put(tty); + } ircomm_tty_ias_register(self); @@ -398,23 +404,26 @@ void ircomm_tty_disconnect_indication(void *instance, void *sap, struct sk_buff *skb) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + struct tty_struct *tty; IRDA_DEBUG(2, "%s()\n", __func__ ); IRDA_ASSERT(self != NULL, return;); IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - if (!self->tty) + tty = tty_port_tty_get(&self->port); + if (!tty) return; /* This will stop control data transfers */ self->flow = FLOW_STOP; /* Stop data transfers */ - self->tty->hw_stopped = 1; + tty->hw_stopped = 1; ircomm_tty_do_event(self, IRCOMM_TTY_DISCONNECT_INDICATION, NULL, NULL); + tty_kref_put(tty); } /* @@ -550,12 +559,15 @@ void ircomm_tty_connect_indication(void *instance, void *sap, */ void ircomm_tty_link_established(struct ircomm_tty_cb *self) { + struct tty_struct *tty; + IRDA_DEBUG(2, "%s()\n", __func__ ); IRDA_ASSERT(self != NULL, return;); IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - if (!self->tty) + tty = tty_port_tty_get(&self->port); + if (!tty) return; del_timer(&self->watchdog_timer); @@ -566,19 +578,22 @@ void ircomm_tty_link_established(struct ircomm_tty_cb *self) * will have to wait for the peer device (DCE) to raise the CTS * line. */ - if ((self->flags & ASYNC_CTS_FLOW) && ((self->settings.dce & IRCOMM_CTS) == 0)) { + if (tty_port_cts_enabled(&self->port) && + ((self->settings.dce & IRCOMM_CTS) == 0)) { IRDA_DEBUG(0, "%s(), waiting for CTS ...\n", __func__ ); - return; + goto put; } else { IRDA_DEBUG(1, "%s(), starting hardware!\n", __func__ ); - self->tty->hw_stopped = 0; + tty->hw_stopped = 0; /* Wake up processes blocked on open */ - wake_up_interruptible(&self->open_wait); + wake_up_interruptible(&self->port.open_wait); } schedule_work(&self->tqueue); +put: + tty_kref_put(tty); } /* @@ -977,14 +992,17 @@ static int ircomm_tty_state_ready(struct ircomm_tty_cb *self, ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH); ircomm_tty_start_watchdog_timer(self, 3*HZ); - if (self->flags & ASYNC_CHECK_CD) { + if (self->port.flags & ASYNC_CHECK_CD) { /* Drop carrier */ self->settings.dce = IRCOMM_DELTA_CD; ircomm_tty_check_modem_status(self); } else { + struct tty_struct *tty = tty_port_tty_get(&self->port); IRDA_DEBUG(0, "%s(), hanging up!\n", __func__ ); - if (self->tty) - tty_hangup(self->tty); + if (tty) { + tty_hangup(tty); + tty_kref_put(tty); + } } break; default: diff --git a/net/irda/ircomm/ircomm_tty_ioctl.c b/net/irda/ircomm/ircomm_tty_ioctl.c index d0667d68351d..b343f50dc8d7 100644 --- a/net/irda/ircomm/ircomm_tty_ioctl.c +++ b/net/irda/ircomm/ircomm_tty_ioctl.c @@ -52,17 +52,18 @@ * Change speed of the driver. If the remote device is a DCE, then this * should make it change the speed of its serial port */ -static void ircomm_tty_change_speed(struct ircomm_tty_cb *self) +static void ircomm_tty_change_speed(struct ircomm_tty_cb *self, + struct tty_struct *tty) { unsigned int cflag, cval; int baud; IRDA_DEBUG(2, "%s()\n", __func__ ); - if (!self->tty || !self->tty->termios || !self->ircomm) + if (!self->ircomm) return; - cflag = self->tty->termios->c_cflag; + cflag = tty->termios.c_cflag; /* byte size and parity */ switch (cflag & CSIZE) { @@ -81,7 +82,7 @@ static void ircomm_tty_change_speed(struct ircomm_tty_cb *self) cval |= IRCOMM_PARITY_EVEN; /* Determine divisor based on baud rate */ - baud = tty_get_baud_rate(self->tty); + baud = tty_get_baud_rate(tty); if (!baud) baud = 9600; /* B0 transition handled in rs_set_termios */ @@ -90,19 +91,19 @@ static void ircomm_tty_change_speed(struct ircomm_tty_cb *self) /* CTS flow control flag and modem status interrupts */ if (cflag & CRTSCTS) { - self->flags |= ASYNC_CTS_FLOW; + self->port.flags |= ASYNC_CTS_FLOW; self->settings.flow_control |= IRCOMM_RTS_CTS_IN; /* This got me. Bummer. Jean II */ if (self->service_type == IRCOMM_3_WIRE_RAW) IRDA_WARNING("%s(), enabling RTS/CTS on link that doesn't support it (3-wire-raw)\n", __func__); } else { - self->flags &= ~ASYNC_CTS_FLOW; + self->port.flags &= ~ASYNC_CTS_FLOW; self->settings.flow_control &= ~IRCOMM_RTS_CTS_IN; } if (cflag & CLOCAL) - self->flags &= ~ASYNC_CHECK_CD; + self->port.flags &= ~ASYNC_CHECK_CD; else - self->flags |= ASYNC_CHECK_CD; + self->port.flags |= ASYNC_CHECK_CD; #if 0 /* * Set up parity check flag @@ -148,18 +149,18 @@ void ircomm_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; - unsigned int cflag = tty->termios->c_cflag; + unsigned int cflag = tty->termios.c_cflag; IRDA_DEBUG(2, "%s()\n", __func__ ); if ((cflag == old_termios->c_cflag) && - (RELEVANT_IFLAG(tty->termios->c_iflag) == + (RELEVANT_IFLAG(tty->termios.c_iflag) == RELEVANT_IFLAG(old_termios->c_iflag))) { return; } - ircomm_tty_change_speed(self); + ircomm_tty_change_speed(self, tty); /* Handle transition to B0 status */ if ((old_termios->c_cflag & CBAUD) && @@ -172,7 +173,7 @@ void ircomm_tty_set_termios(struct tty_struct *tty, if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { self->settings.dte |= IRCOMM_DTR; - if (!(tty->termios->c_cflag & CRTSCTS) || + if (!(tty->termios.c_cflag & CRTSCTS) || !test_bit(TTY_THROTTLED, &tty->flags)) { self->settings.dte |= IRCOMM_RTS; } @@ -181,7 +182,7 @@ void ircomm_tty_set_termios(struct tty_struct *tty, /* Handle turning off CRTSCTS */ if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) + !(tty->termios.c_cflag & CRTSCTS)) { tty->hw_stopped = 0; ircomm_tty_start(tty); @@ -270,10 +271,10 @@ static int ircomm_tty_get_serial_info(struct ircomm_tty_cb *self, memset(&info, 0, sizeof(info)); info.line = self->line; - info.flags = self->flags; + info.flags = self->port.flags; info.baud_base = self->settings.data_rate; - info.close_delay = self->close_delay; - info.closing_wait = self->closing_wait; + info.close_delay = self->port.close_delay; + info.closing_wait = self->port.closing_wait; /* For compatibility */ info.type = PORT_16550A; diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c index 393355d37b47..513cab08a986 100644 --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -1347,11 +1347,10 @@ static void l2tp_tunnel_free(struct l2tp_tunnel *tunnel) /* Remove from tunnel list */ spin_lock_bh(&pn->l2tp_tunnel_list_lock); list_del_rcu(&tunnel->list); + kfree_rcu(tunnel, rcu); spin_unlock_bh(&pn->l2tp_tunnel_list_lock); - synchronize_rcu(); atomic_dec(&l2tp_tunnel_count); - kfree(tunnel); } /* Create a socket for the tunnel, if one isn't set up by diff --git a/net/l2tp/l2tp_core.h b/net/l2tp/l2tp_core.h index a38ec6cdeee1..56d583e083a7 100644 --- a/net/l2tp/l2tp_core.h +++ b/net/l2tp/l2tp_core.h @@ -163,6 +163,7 @@ struct l2tp_tunnel_cfg { struct l2tp_tunnel { int magic; /* Should be L2TP_TUNNEL_MAGIC */ + struct rcu_head rcu; rwlock_t hlist_lock; /* protect session_hlist */ struct hlist_head session_hlist[L2TP_HASH_SIZE]; /* hashed list of sessions, diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index acf712ffb5e6..c5e8c9c31f76 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1811,37 +1811,31 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr, sdata, NULL, NULL); } else { - int is_mesh_mcast = 1; - const u8 *mesh_da; + /* DS -> MBSS (802.11-2012 13.11.3.3). + * For unicast with unknown forwarding information, + * destination might be in the MBSS or if that fails + * forwarded to another mesh gate. In either case + * resolution will be handled in ieee80211_xmit(), so + * leave the original DA. This also works for mcast */ + const u8 *mesh_da = skb->data; + + if (mppath) + mesh_da = mppath->mpp; + else if (mpath) + mesh_da = mpath->dst; + rcu_read_unlock(); - if (is_multicast_ether_addr(skb->data)) - /* DA TA mSA AE:SA */ - mesh_da = skb->data; - else { - static const u8 bcast[ETH_ALEN] = - { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - if (mppath) { - /* RA TA mDA mSA AE:DA SA */ - mesh_da = mppath->mpp; - is_mesh_mcast = 0; - } else if (mpath) { - mesh_da = mpath->dst; - is_mesh_mcast = 0; - } else { - /* DA TA mSA AE:SA */ - mesh_da = bcast; - } - } hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc, mesh_da, sdata->vif.addr); - rcu_read_unlock(); - if (is_mesh_mcast) + if (is_multicast_ether_addr(mesh_da)) + /* DA TA mSA AE:SA */ meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr, sdata, skb->data + ETH_ALEN, NULL); else + /* RA TA mDA mSA AE:DA SA */ meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr, sdata, diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 72bf32a84874..f51013c07b9f 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -1171,8 +1171,10 @@ ip_vs_add_service(struct net *net, struct ip_vs_service_user_kern *u, goto out_err; } svc->stats.cpustats = alloc_percpu(struct ip_vs_cpu_stats); - if (!svc->stats.cpustats) + if (!svc->stats.cpustats) { + ret = -ENOMEM; goto out_err; + } /* I'm the first user of the service */ atomic_set(&svc->usecnt, 0); diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index cf4875565d67..2ceec64b19f9 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -249,12 +249,15 @@ static void death_by_event(unsigned long ul_conntrack) { struct nf_conn *ct = (void *)ul_conntrack; struct net *net = nf_ct_net(ct); + struct nf_conntrack_ecache *ecache = nf_ct_ecache_find(ct); + + BUG_ON(ecache == NULL); if (nf_conntrack_event(IPCT_DESTROY, ct) < 0) { /* bad luck, let's retry again */ - ct->timeout.expires = jiffies + + ecache->timeout.expires = jiffies + (random32() % net->ct.sysctl_events_retry_timeout); - add_timer(&ct->timeout); + add_timer(&ecache->timeout); return; } /* we've got the event delivered, now it's dying */ @@ -268,6 +271,9 @@ static void death_by_event(unsigned long ul_conntrack) void nf_ct_insert_dying_list(struct nf_conn *ct) { struct net *net = nf_ct_net(ct); + struct nf_conntrack_ecache *ecache = nf_ct_ecache_find(ct); + + BUG_ON(ecache == NULL); /* add this conntrack to the dying list */ spin_lock_bh(&nf_conntrack_lock); @@ -275,10 +281,10 @@ void nf_ct_insert_dying_list(struct nf_conn *ct) &net->ct.dying); spin_unlock_bh(&nf_conntrack_lock); /* set a new timer to retry event delivery */ - setup_timer(&ct->timeout, death_by_event, (unsigned long)ct); - ct->timeout.expires = jiffies + + setup_timer(&ecache->timeout, death_by_event, (unsigned long)ct); + ecache->timeout.expires = jiffies + (random32() % net->ct.sysctl_events_retry_timeout); - add_timer(&ct->timeout); + add_timer(&ecache->timeout); } EXPORT_SYMBOL_GPL(nf_ct_insert_dying_list); diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index da4fc37a8578..9807f3278fcb 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -2790,7 +2790,8 @@ static int __init ctnetlink_init(void) goto err_unreg_subsys; } - if (register_pernet_subsys(&ctnetlink_net_ops)) { + ret = register_pernet_subsys(&ctnetlink_net_ops); + if (ret < 0) { pr_err("ctnetlink_init: cannot register pernet operations\n"); goto err_unreg_exp_subsys; } diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index 169ab59ed9d4..14e2f3903142 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -480,7 +480,7 @@ __build_packet_message(struct nfulnl_instance *inst, } if (indev && skb_mac_header_was_set(skb)) { - if (nla_put_be32(inst->skb, NFULA_HWTYPE, htons(skb->dev->type)) || + if (nla_put_be16(inst->skb, NFULA_HWTYPE, htons(skb->dev->type)) || nla_put_be16(inst->skb, NFULA_HWLEN, htons(skb->dev->hard_header_len)) || nla_put(inst->skb, NFULA_HWHEADER, skb->dev->hard_header_len, @@ -996,8 +996,10 @@ static int __init nfnetlink_log_init(void) #ifdef CONFIG_PROC_FS if (!proc_create("nfnetlink_log", 0440, - proc_net_netfilter, &nful_file_ops)) + proc_net_netfilter, &nful_file_ops)) { + status = -ENOMEM; goto cleanup_logger; + } #endif return status; diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 1445d73533ed..527023823b5c 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -1373,7 +1373,8 @@ static int netlink_sendmsg(struct kiocb *kiocb, struct socket *sock, dst_pid = addr->nl_pid; dst_group = ffs(addr->nl_groups); err = -EPERM; - if (dst_group && !netlink_capable(sock, NL_NONROOT_SEND)) + if ((dst_group || dst_pid) && + !netlink_capable(sock, NL_NONROOT_SEND)) goto out; } else { dst_pid = nlk->dst_pid; @@ -2147,6 +2148,7 @@ static void __init netlink_add_usersock_entry(void) rcu_assign_pointer(nl_table[NETLINK_USERSOCK].listeners, listeners); nl_table[NETLINK_USERSOCK].module = THIS_MODULE; nl_table[NETLINK_USERSOCK].registered = 1; + nl_table[NETLINK_USERSOCK].nl_nonroot = NL_NONROOT_SEND; netlink_table_ungrab(); } diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index aee7196aac36..c5c9e2a54218 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -1273,7 +1273,7 @@ static void __fanout_unlink(struct sock *sk, struct packet_sock *po) spin_unlock(&f->lock); } -bool match_fanout_group(struct packet_type *ptype, struct sock * sk) +static bool match_fanout_group(struct packet_type *ptype, struct sock * sk) { if (ptype->af_packet_priv == (void*)((struct packet_sock *)sk)->fanout) return true; diff --git a/net/socket.c b/net/socket.c index a5471f804d99..edc3c4af9085 100644 --- a/net/socket.c +++ b/net/socket.c @@ -2604,7 +2604,7 @@ static int do_siocgstamp(struct net *net, struct socket *sock, err = sock_do_ioctl(net, sock, cmd, (unsigned long)&ktv); set_fs(old_fs); if (!err) - err = compat_put_timeval(up, &ktv); + err = compat_put_timeval(&ktv, up); return err; } @@ -2620,7 +2620,7 @@ static int do_siocgstampns(struct net *net, struct socket *sock, err = sock_do_ioctl(net, sock, cmd, (unsigned long)&kts); set_fs(old_fs); if (!err) - err = compat_put_timespec(up, &kts); + err = compat_put_timespec(&kts, up); return err; } diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index 87cd0e4d4282..210be48d8ae3 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -1994,8 +1994,10 @@ int __xfrm_init_state(struct xfrm_state *x, bool init_replay) goto error; x->outer_mode = xfrm_get_mode(x->props.mode, family); - if (x->outer_mode == NULL) + if (x->outer_mode == NULL) { + err = -EPROTONOSUPPORT; goto error; + } if (init_replay) { err = xfrm_init_replay(x); diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst index 6bf8e87f1dcf..c3f69ae275d1 100644 --- a/scripts/Makefile.fwinst +++ b/scripts/Makefile.fwinst @@ -42,7 +42,7 @@ quiet_cmd_install = INSTALL $(subst $(srctree)/,,$@) $(installed-fw-dirs): $(call cmd,mkdir) -$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $(INSTALL_FW_PATH)/$$(dir %) +$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $$(dir $(INSTALL_FW_PATH)/%) $(call cmd,install) PHONY += __fw_install __fw_modinst FORCE diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh index 4629038c9e5a..4235a6361fec 100644 --- a/scripts/link-vmlinux.sh +++ b/scripts/link-vmlinux.sh @@ -211,7 +211,7 @@ if [ -n "${CONFIG_KALLSYMS}" ]; then if ! cmp -s System.map .tmp_System.map; then echo >&2 Inconsistent kallsyms data - echo >&2 echo Try "make KALLSYMS_EXTRA_PASS=1" as a workaround + echo >&2 Try "make KALLSYMS_EXTRA_PASS=1" as a workaround cleanup exit 1 fi diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index f560051a949e..f25c24c743f9 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1209,6 +1209,9 @@ static void snd_hda_codec_free(struct hda_codec *codec) kfree(codec); } +static bool snd_hda_codec_get_supported_ps(struct hda_codec *codec, + hda_nid_t fg, unsigned int power_state); + static void hda_set_power_state(struct hda_codec *codec, hda_nid_t fg, unsigned int power_state); @@ -1317,6 +1320,10 @@ int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, AC_VERB_GET_SUBSYSTEM_ID, 0); } + codec->epss = snd_hda_codec_get_supported_ps(codec, + codec->afg ? codec->afg : codec->mfg, + AC_PWRST_EPSS); + /* power-up all before initialization */ hda_set_power_state(codec, codec->afg ? codec->afg : codec->mfg, @@ -3543,8 +3550,7 @@ static void hda_set_power_state(struct hda_codec *codec, hda_nid_t fg, /* this delay seems necessary to avoid click noise at power-down */ if (power_state == AC_PWRST_D3) { /* transition time less than 10ms for power down */ - bool epss = snd_hda_codec_get_supported_ps(codec, fg, AC_PWRST_EPSS); - msleep(epss ? 10 : 100); + msleep(codec->epss ? 10 : 100); } /* repeat power states setting at most 10 times*/ diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 7fbc1bcaf1a9..e5a7e19a8071 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -862,6 +862,7 @@ struct hda_codec { unsigned int ignore_misc_bit:1; /* ignore MISC_NO_PRESENCE bit */ unsigned int no_jack_detect:1; /* Machine has no jack-detection */ unsigned int pcm_format_first:1; /* PCM format must be set first */ + unsigned int epss:1; /* supporting EPSS? */ #ifdef CONFIG_SND_HDA_POWER_SAVE unsigned int power_on :1; /* current (global) power-state */ int power_transition; /* power-state in transition */ diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index ea5775a1a7db..6f806d3e56bb 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4543,6 +4543,9 @@ static void stac92xx_line_out_detect(struct hda_codec *codec, struct auto_pin_cfg *cfg = &spec->autocfg; int i; + if (cfg->speaker_outs == 0) + return; + for (i = 0; i < cfg->line_outs; i++) { if (presence) break; @@ -5531,6 +5534,7 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) snd_hda_codec_set_pincfg(codec, 0xf, 0x2181205e); } + codec->epss = 0; /* longer delay needed for D3 */ codec->no_trigger_sense = 1; codec->spec = spec; diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c index d33c48baaf71..f18e48847323 100644 --- a/sound/soc/omap/mcbsp.c +++ b/sound/soc/omap/mcbsp.c @@ -27,6 +27,8 @@ #include <plat/mcbsp.h> +#include <plat/cpu.h> + #include "mcbsp.h" static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) diff --git a/sound/soc/omap/omap-abe-twl6040.c b/sound/soc/omap/omap-abe-twl6040.c index 9d93793d3077..45909ca889fa 100644 --- a/sound/soc/omap/omap-abe-twl6040.c +++ b/sound/soc/omap/omap-abe-twl6040.c @@ -31,10 +31,6 @@ #include <sound/soc.h> #include <sound/jack.h> -#include <asm/mach-types.h> -#include <plat/hardware.h> -#include <plat/mux.h> - #include "omap-dmic.h" #include "omap-mcpdm.h" #include "omap-pcm.h" diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index acdd3ef14e08..d0ee71d6cc23 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -32,6 +32,7 @@ #include <sound/initval.h> #include <sound/soc.h> +#include <plat/cpu.h> #include <plat/dma.h> #include <plat/mcbsp.h> #include "mcbsp.h" diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/omap/omap-mcpdm.c index 2c66e2498a45..ea053c3d2ab1 100644 --- a/sound/soc/omap/omap-mcpdm.c +++ b/sound/soc/omap/omap-mcpdm.c @@ -45,6 +45,8 @@ #include "omap-mcpdm.h" #include "omap-pcm.h" +#define OMAP44XX_MCPDM_L3_BASE 0x49032000 + struct omap_mcpdm { struct device *dev; unsigned long phys_base; diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c index f0feb06615f8..b30994179885 100644 --- a/sound/soc/omap/omap-pcm.c +++ b/sound/soc/omap/omap-pcm.c @@ -30,6 +30,7 @@ #include <sound/pcm_params.h> #include <sound/soc.h> +#include <plat/cpu.h> #include <plat/dma.h> #include "omap-pcm.h" diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c index 0e283226e2bf..78e14198aa11 100644 --- a/sound/soc/omap/sdp3430.c +++ b/sound/soc/omap/sdp3430.c @@ -34,6 +34,7 @@ #include <mach/hardware.h> #include <mach/gpio.h> #include <plat/mcbsp.h> +#include <linux/platform_data/gpio-omap.h> /* Register descriptions for twl4030 codec part */ #include <linux/mfd/twl4030-audio.h> diff --git a/sound/usb/card.c b/sound/usb/card.c index d5b5c3388e28..4a469f0cb6d4 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -553,7 +553,7 @@ static void snd_usb_audio_disconnect(struct usb_device *dev, struct snd_usb_audio *chip) { struct snd_card *card; - struct list_head *p; + struct list_head *p, *n; if (chip == (void *)-1L) return; @@ -570,7 +570,7 @@ static void snd_usb_audio_disconnect(struct usb_device *dev, snd_usb_stream_disconnect(p); } /* release the endpoint resources */ - list_for_each(p, &chip->ep_list) { + list_for_each_safe(p, n, &chip->ep_list) { snd_usb_endpoint_free(p); } /* release the midi resources */ diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index c41181202688..d6e2bb49c59c 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -141,7 +141,7 @@ int snd_usb_endpoint_implict_feedback_sink(struct snd_usb_endpoint *ep) * * For implicit feedback, next_packet_size() is unused. */ -static int next_packet_size(struct snd_usb_endpoint *ep) +int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep) { unsigned long flags; int ret; @@ -177,15 +177,6 @@ static void retire_inbound_urb(struct snd_usb_endpoint *ep, ep->retire_data_urb(ep->data_subs, urb); } -static void prepare_outbound_urb_sizes(struct snd_usb_endpoint *ep, - struct snd_urb_ctx *ctx) -{ - int i; - - for (i = 0; i < ctx->packets; ++i) - ctx->packet_size[i] = next_packet_size(ep); -} - /* * Prepare a PLAYBACK urb for submission to the bus. */ @@ -370,7 +361,6 @@ static void snd_complete_urb(struct urb *urb) goto exit_clear; } - prepare_outbound_urb_sizes(ep, ctx); prepare_outbound_urb(ep, ctx); } else { retire_inbound_urb(ep, ctx); @@ -799,7 +789,9 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep, /** * snd_usb_endpoint_start: start an snd_usb_endpoint * - * @ep: the endpoint to start + * @ep: the endpoint to start + * @can_sleep: flag indicating whether the operation is executed in + * non-atomic context * * A call to this function will increment the use count of the endpoint. * In case it is not already running, the URBs for this endpoint will be @@ -809,7 +801,7 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep, * * Returns an error if the URB submission failed, 0 in all other cases. */ -int snd_usb_endpoint_start(struct snd_usb_endpoint *ep) +int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, int can_sleep) { int err; unsigned int i; @@ -821,6 +813,11 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep) if (++ep->use_count != 1) return 0; + /* just to be sure */ + deactivate_urbs(ep, 0, can_sleep); + if (can_sleep) + wait_clear_urbs(ep); + ep->active_mask = 0; ep->unlink_mask = 0; ep->phase = 0; @@ -850,7 +847,6 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep) goto __error; if (usb_pipeout(ep->pipe)) { - prepare_outbound_urb_sizes(ep, urb->context); prepare_outbound_urb(ep, urb->context); } else { prepare_inbound_urb(ep, urb->context); diff --git a/sound/usb/endpoint.h b/sound/usb/endpoint.h index ee2723fb174f..cbbbdf226d66 100644 --- a/sound/usb/endpoint.h +++ b/sound/usb/endpoint.h @@ -13,7 +13,7 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep, struct audioformat *fmt, struct snd_usb_endpoint *sync_ep); -int snd_usb_endpoint_start(struct snd_usb_endpoint *ep); +int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, int can_sleep); void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep, int force, int can_sleep, int wait); int snd_usb_endpoint_activate(struct snd_usb_endpoint *ep); @@ -21,6 +21,7 @@ int snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep); void snd_usb_endpoint_free(struct list_head *head); int snd_usb_endpoint_implict_feedback_sink(struct snd_usb_endpoint *ep); +int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep); void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep, struct snd_usb_endpoint *sender, diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 62ec808ed792..fd5e982fc98c 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -212,7 +212,7 @@ int snd_usb_init_pitch(struct snd_usb_audio *chip, int iface, } } -static int start_endpoints(struct snd_usb_substream *subs) +static int start_endpoints(struct snd_usb_substream *subs, int can_sleep) { int err; @@ -225,7 +225,7 @@ static int start_endpoints(struct snd_usb_substream *subs) snd_printdd(KERN_DEBUG "Starting data EP @%p\n", ep); ep->data_subs = subs; - err = snd_usb_endpoint_start(ep); + err = snd_usb_endpoint_start(ep, can_sleep); if (err < 0) { clear_bit(SUBSTREAM_FLAG_DATA_EP_STARTED, &subs->flags); return err; @@ -236,10 +236,25 @@ static int start_endpoints(struct snd_usb_substream *subs) !test_and_set_bit(SUBSTREAM_FLAG_SYNC_EP_STARTED, &subs->flags)) { struct snd_usb_endpoint *ep = subs->sync_endpoint; + if (subs->data_endpoint->iface != subs->sync_endpoint->iface || + subs->data_endpoint->alt_idx != subs->sync_endpoint->alt_idx) { + err = usb_set_interface(subs->dev, + subs->sync_endpoint->iface, + subs->sync_endpoint->alt_idx); + if (err < 0) { + snd_printk(KERN_ERR + "%d:%d:%d: cannot set interface (%d)\n", + subs->dev->devnum, + subs->sync_endpoint->iface, + subs->sync_endpoint->alt_idx, err); + return -EIO; + } + } + snd_printdd(KERN_DEBUG "Starting sync EP @%p\n", ep); ep->sync_slave = subs->data_endpoint; - err = snd_usb_endpoint_start(ep); + err = snd_usb_endpoint_start(ep, can_sleep); if (err < 0) { clear_bit(SUBSTREAM_FLAG_SYNC_EP_STARTED, &subs->flags); return err; @@ -544,13 +559,10 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream) subs->last_frame_number = 0; runtime->delay = 0; - /* clear the pending deactivation on the target EPs */ - deactivate_endpoints(subs); - /* for playback, submit the URBs now; otherwise, the first hwptr_done * updates for all URBs would happen at the same time when starting */ if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) - return start_endpoints(subs); + return start_endpoints(subs, 1); return 0; } @@ -1032,6 +1044,7 @@ static void prepare_playback_urb(struct snd_usb_substream *subs, struct urb *urb) { struct snd_pcm_runtime *runtime = subs->pcm_substream->runtime; + struct snd_usb_endpoint *ep = subs->data_endpoint; struct snd_urb_ctx *ctx = urb->context; unsigned int counts, frames, bytes; int i, stride, period_elapsed = 0; @@ -1043,7 +1056,11 @@ static void prepare_playback_urb(struct snd_usb_substream *subs, urb->number_of_packets = 0; spin_lock_irqsave(&subs->lock, flags); for (i = 0; i < ctx->packets; i++) { - counts = ctx->packet_size[i]; + if (ctx->packet_size[i]) + counts = ctx->packet_size[i]; + else + counts = snd_usb_endpoint_next_packet_size(ep); + /* set up descriptor */ urb->iso_frame_desc[i].offset = frames * stride; urb->iso_frame_desc[i].length = counts * stride; @@ -1094,7 +1111,16 @@ static void prepare_playback_urb(struct snd_usb_substream *subs, subs->hwptr_done += bytes; if (subs->hwptr_done >= runtime->buffer_size * stride) subs->hwptr_done -= runtime->buffer_size * stride; + + /* update delay with exact number of samples queued */ + runtime->delay = subs->last_delay; runtime->delay += frames; + subs->last_delay = runtime->delay; + + /* realign last_frame_number */ + subs->last_frame_number = usb_get_current_frame_number(subs->dev); + subs->last_frame_number &= 0xFF; /* keep 8 LSBs */ + spin_unlock_irqrestore(&subs->lock, flags); urb->transfer_buffer_length = bytes; if (period_elapsed) @@ -1112,12 +1138,26 @@ static void retire_playback_urb(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime = subs->pcm_substream->runtime; int stride = runtime->frame_bits >> 3; int processed = urb->transfer_buffer_length / stride; + int est_delay; spin_lock_irqsave(&subs->lock, flags); - if (processed > runtime->delay) - runtime->delay = 0; + est_delay = snd_usb_pcm_delay(subs, runtime->rate); + /* update delay with exact number of samples played */ + if (processed > subs->last_delay) + subs->last_delay = 0; else - runtime->delay -= processed; + subs->last_delay -= processed; + runtime->delay = subs->last_delay; + + /* + * Report when delay estimate is off by more than 2ms. + * The error should be lower than 2ms since the estimate relies + * on two reads of a counter updated every ms. + */ + if (abs(est_delay - subs->last_delay) * 1000 > runtime->rate * 2) + snd_printk(KERN_DEBUG "delay: estimated %d, actual %d\n", + est_delay, subs->last_delay); + spin_unlock_irqrestore(&subs->lock, flags); } @@ -1175,7 +1215,7 @@ static int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream switch (cmd) { case SNDRV_PCM_TRIGGER_START: - err = start_endpoints(subs); + err = start_endpoints(subs, 0); if (err < 0) return err; |