diff options
59 files changed, 1042 insertions, 3916 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 5e925a25e77d..ea4fbc993d91 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4775,15 +4775,6 @@ L: iommu@lists.linux-foundation.org S: Maintained F: drivers/iommu/exynos-iommu.c -EXYNOS MIPI DISPLAY DRIVERS -M: Inki Dae <inki.dae@samsung.com> -M: Donghwa Lee <dh09.lee@samsung.com> -M: Kyungmin Park <kyungmin.park@samsung.com> -L: linux-fbdev@vger.kernel.org -S: Maintained -F: drivers/video/fbdev/exynos/exynos_mipi* -F: include/video/exynos_mipi* - EZchip NPS platform support M: Noam Camus <noamc@ezchip.com> S: Supported @@ -4962,12 +4953,9 @@ F: drivers/net/wan/dlci.c F: drivers/net/wan/sdla.c FRAMEBUFFER LAYER -M: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> M: Tomi Valkeinen <tomi.valkeinen@ti.com> L: linux-fbdev@vger.kernel.org -W: http://linux-fbdev.sourceforge.net/ Q: http://patchwork.kernel.org/project/linux-fbdev/list/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev.git S: Maintained F: Documentation/fb/ F: drivers/video/ diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 4e484f406419..c58f6841f8aa 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -168,8 +168,6 @@ CONFIG_DRM_PANEL_SAMSUNG_LD9040=y CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y CONFIG_DRM_NXP_PTN3460=y CONFIG_DRM_PARADE_PS8622=y -CONFIG_EXYNOS_VIDEO=y -CONFIG_EXYNOS_MIPI_DSI=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_PWM=y diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index 88b008fb8a4e..af2f117208f1 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -284,12 +284,14 @@ config FB_PM2_FIFO_DISCONNECT config FB_ARMCLCD tristate "ARM PrimeCell PL110 support" depends on ARM || ARM64 || COMPILE_TEST - depends on FB && ARM_AMBA + depends on FB && ARM_AMBA && HAS_IOMEM select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_MODE_HELPERS if OF select VIDEOMODE_HELPERS if OF + select BACKLIGHT_LCD_SUPPORT if OF + select BACKLIGHT_CLASS_DEVICE if OF help This framebuffer device driver is for the ARM PrimeCell PL110 Colour LCD controller. ARM PrimeCells provide the building @@ -305,6 +307,8 @@ config PLAT_VERSATILE_CLCD def_bool ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_INTEGRATOR depends on ARM depends on FB_ARMCLCD && FB=y + select REGMAP + select MFD_SYSCON config FB_ACORN bool "Acorn VIDC support" @@ -2443,7 +2447,6 @@ config FB_SIMPLE source "drivers/video/fbdev/omap/Kconfig" source "drivers/video/fbdev/omap2/Kconfig" -source "drivers/video/fbdev/exynos/Kconfig" source "drivers/video/fbdev/mmp/Kconfig" config FB_SH_MOBILE_MERAM diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile index f6731867dd26..ee8c81405a7f 100644 --- a/drivers/video/fbdev/Makefile +++ b/drivers/video/fbdev/Makefile @@ -6,8 +6,6 @@ obj-y += core/ -obj-$(CONFIG_EXYNOS_VIDEO) += exynos/ - obj-$(CONFIG_FB_MACMODES) += macmodes.o obj-$(CONFIG_FB_WMT_GE_ROPS) += wmt_ge_rops.o @@ -79,6 +77,7 @@ obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o obj-$(CONFIG_FB_PVR2) += pvr2fb.o obj-$(CONFIG_FB_VOODOO1) += sstfb.o obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o +obj-$(CONFIG_ARCH_NOMADIK) += amba-clcd-nomadik.o obj-$(CONFIG_PLAT_VERSATILE_CLCD) += amba-clcd-versatile.o obj-$(CONFIG_FB_GOLDFISH) += goldfishfb.o obj-$(CONFIG_FB_68328) += 68328fb.o diff --git a/drivers/video/fbdev/amba-clcd-nomadik.c b/drivers/video/fbdev/amba-clcd-nomadik.c new file mode 100644 index 000000000000..0c06fcaaa6e8 --- /dev/null +++ b/drivers/video/fbdev/amba-clcd-nomadik.c @@ -0,0 +1,259 @@ +#include <linux/amba/bus.h> +#include <linux/amba/clcd.h> +#include <linux/gpio/consumer.h> +#include <linux/of.h> +#include <linux/of_graph.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> + +#include "amba-clcd-nomadik.h" + +static struct gpio_desc *grestb; +static struct gpio_desc *scen; +static struct gpio_desc *scl; +static struct gpio_desc *sda; + +static u8 tpg110_readwrite_reg(bool write, u8 address, u8 outval) +{ + int i; + u8 inval = 0; + + /* Assert SCEN */ + gpiod_set_value_cansleep(scen, 1); + ndelay(150); + /* Hammer out the address */ + for (i = 5; i >= 0; i--) { + if (address & BIT(i)) + gpiod_set_value_cansleep(sda, 1); + else + gpiod_set_value_cansleep(sda, 0); + ndelay(150); + /* Send an SCL pulse */ + gpiod_set_value_cansleep(scl, 1); + ndelay(160); + gpiod_set_value_cansleep(scl, 0); + ndelay(160); + } + + if (write) { + /* WRITE */ + gpiod_set_value_cansleep(sda, 0); + } else { + /* READ */ + gpiod_set_value_cansleep(sda, 1); + } + ndelay(150); + /* Send an SCL pulse */ + gpiod_set_value_cansleep(scl, 1); + ndelay(160); + gpiod_set_value_cansleep(scl, 0); + ndelay(160); + + if (!write) + /* HiZ turn-around cycle */ + gpiod_direction_input(sda); + ndelay(150); + /* Send an SCL pulse */ + gpiod_set_value_cansleep(scl, 1); + ndelay(160); + gpiod_set_value_cansleep(scl, 0); + ndelay(160); + + /* Hammer in/out the data */ + for (i = 7; i >= 0; i--) { + int value; + + if (write) { + value = !!(outval & BIT(i)); + gpiod_set_value_cansleep(sda, value); + } else { + value = gpiod_get_value(sda); + if (value) + inval |= BIT(i); + } + ndelay(150); + /* Send an SCL pulse */ + gpiod_set_value_cansleep(scl, 1); + ndelay(160); + gpiod_set_value_cansleep(scl, 0); + ndelay(160); + } + + gpiod_direction_output(sda, 0); + /* Deassert SCEN */ + gpiod_set_value_cansleep(scen, 0); + /* Satisfies SCEN pulse width */ + udelay(1); + + return inval; +} + +static u8 tpg110_read_reg(u8 address) +{ + return tpg110_readwrite_reg(false, address, 0); +} + +static void tpg110_write_reg(u8 address, u8 outval) +{ + tpg110_readwrite_reg(true, address, outval); +} + +static void tpg110_startup(struct device *dev) +{ + u8 val; + + dev_info(dev, "TPG110 display enable\n"); + /* De-assert the reset signal */ + gpiod_set_value_cansleep(grestb, 0); + mdelay(1); + dev_info(dev, "de-asserted GRESTB\n"); + + /* Test display communication */ + tpg110_write_reg(0x00, 0x55); + val = tpg110_read_reg(0x00); + if (val == 0x55) + dev_info(dev, "passed communication test\n"); + val = tpg110_read_reg(0x01); + dev_info(dev, "TPG110 chip ID: %d version: %d\n", + val>>4, val&0x0f); + + /* Show display resolution */ + val = tpg110_read_reg(0x02); + val &= 7; + switch (val) { + case 0x0: + dev_info(dev, "IN 400x240 RGB -> OUT 800x480 RGB (dual scan)"); + break; + case 0x1: + dev_info(dev, "IN 480x272 RGB -> OUT 800x480 RGB (dual scan)"); + break; + case 0x4: + dev_info(dev, "480x640 RGB"); + break; + case 0x5: + dev_info(dev, "480x272 RGB"); + break; + case 0x6: + dev_info(dev, "640x480 RGB"); + break; + case 0x7: + dev_info(dev, "800x480 RGB"); + break; + default: + dev_info(dev, "ILLEGAL RESOLUTION"); + break; + } + + val = tpg110_read_reg(0x03); + dev_info(dev, "resolution is controlled by %s\n", + (val & BIT(7)) ? "software" : "hardware"); +} + +static void tpg110_enable(struct clcd_fb *fb) +{ + struct device *dev = &fb->dev->dev; + static bool startup; + u8 val; + + if (!startup) { + tpg110_startup(dev); + startup = true; + } + + /* Take chip out of standby */ + val = tpg110_read_reg(0x03); + val |= BIT(0); + tpg110_write_reg(0x03, val); +} + +static void tpg110_disable(struct clcd_fb *fb) +{ + u8 val; + + dev_info(&fb->dev->dev, "TPG110 display disable\n"); + val = tpg110_read_reg(0x03); + /* Put into standby */ + val &= ~BIT(0); + tpg110_write_reg(0x03, val); +} + +static void tpg110_init(struct device *dev, struct device_node *np, + struct clcd_board *board) +{ + dev_info(dev, "TPG110 display init\n"); + + grestb = devm_get_gpiod_from_child(dev, "grestb", &np->fwnode); + if (IS_ERR(grestb)) { + dev_err(dev, "no GRESTB GPIO\n"); + return; + } + /* This asserts the GRESTB signal, putting the display into reset */ + gpiod_direction_output(grestb, 1); + + scen = devm_get_gpiod_from_child(dev, "scen", &np->fwnode); + if (IS_ERR(scen)) { + dev_err(dev, "no SCEN GPIO\n"); + return; + } + gpiod_direction_output(scen, 0); + scl = devm_get_gpiod_from_child(dev, "scl", &np->fwnode); + if (IS_ERR(scl)) { + dev_err(dev, "no SCL GPIO\n"); + return; + } + gpiod_direction_output(scl, 0); + sda = devm_get_gpiod_from_child(dev, "sda", &np->fwnode); + if (IS_ERR(sda)) { + dev_err(dev, "no SDA GPIO\n"); + return; + } + gpiod_direction_output(sda, 0); + board->enable = tpg110_enable; + board->disable = tpg110_disable; +} + +int nomadik_clcd_init_panel(struct clcd_fb *fb, + struct device_node *endpoint) +{ + struct device_node *panel; + + panel = of_graph_get_remote_port_parent(endpoint); + if (!panel) + return -ENODEV; + + if (of_device_is_compatible(panel, "tpo,tpg110")) + tpg110_init(&fb->dev->dev, panel, fb->board); + else + dev_info(&fb->dev->dev, "unknown panel\n"); + + /* Unknown panel, fall through */ + return 0; +} +EXPORT_SYMBOL_GPL(nomadik_clcd_init_panel); + +#define PMU_CTRL_OFFSET 0x0000 +#define PMU_CTRL_LCDNDIF BIT(26) + +int nomadik_clcd_init_board(struct amba_device *adev, + struct clcd_board *board) +{ + struct regmap *pmu_regmap; + + dev_info(&adev->dev, "Nomadik CLCD board init\n"); + pmu_regmap = + syscon_regmap_lookup_by_compatible("stericsson,nomadik-pmu"); + if (IS_ERR(pmu_regmap)) { + dev_err(&adev->dev, "could not find PMU syscon regmap\n"); + return PTR_ERR(pmu_regmap); + } + regmap_update_bits(pmu_regmap, + PMU_CTRL_OFFSET, + PMU_CTRL_LCDNDIF, + 0); + dev_info(&adev->dev, "set PMU mux to CLCD mode\n"); + + return 0; +} +EXPORT_SYMBOL_GPL(nomadik_clcd_init_board); diff --git a/drivers/video/fbdev/amba-clcd-nomadik.h b/drivers/video/fbdev/amba-clcd-nomadik.h new file mode 100644 index 000000000000..50aa9bda69fd --- /dev/null +++ b/drivers/video/fbdev/amba-clcd-nomadik.h @@ -0,0 +1,24 @@ +#ifndef _AMBA_CLCD_NOMADIK_H +#define _AMBA_CLCD_NOMADIK_H + +#include <linux/amba/bus.h> + +#ifdef CONFIG_ARCH_NOMADIK +int nomadik_clcd_init_board(struct amba_device *adev, + struct clcd_board *board); +int nomadik_clcd_init_panel(struct clcd_fb *fb, + struct device_node *endpoint); +#else +static inline int nomadik_clcd_init_board(struct amba_device *adev, + struct clcd_board *board) +{ + return 0; +} +static inline int nomadik_clcd_init_panel(struct clcd_fb *fb, + struct device_node *endpoint) +{ + return 0; +} +#endif + +#endif /* inclusion guard */ diff --git a/drivers/video/fbdev/amba-clcd-versatile.c b/drivers/video/fbdev/amba-clcd-versatile.c index a8a22daa3f9d..19ad8645d93c 100644 --- a/drivers/video/fbdev/amba-clcd-versatile.c +++ b/drivers/video/fbdev/amba-clcd-versatile.c @@ -3,6 +3,12 @@ #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/platform_data/video-clcd-versatile.h> +#include <linux/of.h> +#include <linux/of_graph.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> +#include <linux/bitops.h> +#include "amba-clcd-versatile.h" static struct clcd_panel vga = { .mode = { @@ -178,3 +184,392 @@ void versatile_clcd_remove_dma(struct clcd_fb *fb) dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base, fb->fb.fix.smem_start); } + +#ifdef CONFIG_OF + +static struct regmap *versatile_syscon_map; +static struct regmap *versatile_ib2_map; + +/* + * We detect the different syscon types from the compatible strings. + */ +enum versatile_clcd { + INTEGRATOR_CLCD_CM, + VERSATILE_CLCD, + REALVIEW_CLCD_EB, + REALVIEW_CLCD_PB1176, + REALVIEW_CLCD_PB11MP, + REALVIEW_CLCD_PBA8, + REALVIEW_CLCD_PBX, +}; + +static const struct of_device_id versatile_clcd_of_match[] = { + { + .compatible = "arm,core-module-integrator", + .data = (void *)INTEGRATOR_CLCD_CM, + }, + { + .compatible = "arm,versatile-sysreg", + .data = (void *)VERSATILE_CLCD, + }, + { + .compatible = "arm,realview-eb-syscon", + .data = (void *)REALVIEW_CLCD_EB, + }, + { + .compatible = "arm,realview-pb1176-syscon", + .data = (void *)REALVIEW_CLCD_PB1176, + }, + { + .compatible = "arm,realview-pb11mp-syscon", + .data = (void *)REALVIEW_CLCD_PB11MP, + }, + { + .compatible = "arm,realview-pba8-syscon", + .data = (void *)REALVIEW_CLCD_PBA8, + }, + { + .compatible = "arm,realview-pbx-syscon", + .data = (void *)REALVIEW_CLCD_PBX, + }, + {}, +}; + +/* + * Core module CLCD control on the Integrator/CP, bits + * 8 thru 19 of the CM_CONTROL register controls a bunch + * of CLCD settings. + */ +#define INTEGRATOR_HDR_CTRL_OFFSET 0x0C +#define INTEGRATOR_CLCD_LCDBIASEN BIT(8) +#define INTEGRATOR_CLCD_LCDBIASUP BIT(9) +#define INTEGRATOR_CLCD_LCDBIASDN BIT(10) +/* Bits 11,12,13 controls the LCD type */ +#define INTEGRATOR_CLCD_LCDMUX_MASK (BIT(11)|BIT(12)|BIT(13)) +#define INTEGRATOR_CLCD_LCDMUX_LCD24 BIT(11) +#define INTEGRATOR_CLCD_LCDMUX_VGA565 BIT(12) +#define INTEGRATOR_CLCD_LCDMUX_SHARP (BIT(11)|BIT(12)) +#define INTEGRATOR_CLCD_LCDMUX_VGA555 BIT(13) +#define INTEGRATOR_CLCD_LCDMUX_VGA24 (BIT(11)|BIT(12)|BIT(13)) +#define INTEGRATOR_CLCD_LCD0_EN BIT(14) +#define INTEGRATOR_CLCD_LCD1_EN BIT(15) +/* R/L flip on Sharp */ +#define INTEGRATOR_CLCD_LCD_STATIC1 BIT(16) +/* U/D flip on Sharp */ +#define INTEGRATOR_CLCD_LCD_STATIC2 BIT(17) +/* No connection on Sharp */ +#define INTEGRATOR_CLCD_LCD_STATIC BIT(18) +/* 0 = 24bit VGA, 1 = 18bit VGA */ +#define INTEGRATOR_CLCD_LCD_N24BITEN BIT(19) + +#define INTEGRATOR_CLCD_MASK (INTEGRATOR_CLCD_LCDBIASEN | \ + INTEGRATOR_CLCD_LCDBIASUP | \ + INTEGRATOR_CLCD_LCDBIASDN | \ + INTEGRATOR_CLCD_LCDMUX_MASK | \ + INTEGRATOR_CLCD_LCD0_EN | \ + INTEGRATOR_CLCD_LCD1_EN | \ + INTEGRATOR_CLCD_LCD_STATIC1 | \ + INTEGRATOR_CLCD_LCD_STATIC2 | \ + INTEGRATOR_CLCD_LCD_STATIC | \ + INTEGRATOR_CLCD_LCD_N24BITEN) + +static void integrator_clcd_enable(struct clcd_fb *fb) +{ + struct fb_var_screeninfo *var = &fb->fb.var; + u32 val; + + dev_info(&fb->dev->dev, "enable Integrator CLCD connectors\n"); + + /* FIXME: really needed? */ + val = INTEGRATOR_CLCD_LCD_STATIC1 | INTEGRATOR_CLCD_LCD_STATIC2 | + INTEGRATOR_CLCD_LCD0_EN | INTEGRATOR_CLCD_LCD1_EN; + if (var->bits_per_pixel <= 8 || + (var->bits_per_pixel == 16 && var->green.length == 5)) + /* Pseudocolor, RGB555, BGR555 */ + val |= INTEGRATOR_CLCD_LCDMUX_VGA555; + else if (fb->fb.var.bits_per_pixel <= 16) + /* truecolor RGB565 */ + val |= INTEGRATOR_CLCD_LCDMUX_VGA565; + else + val = 0; /* no idea for this, don't trust the docs */ + + regmap_update_bits(versatile_syscon_map, + INTEGRATOR_HDR_CTRL_OFFSET, + INTEGRATOR_CLCD_MASK, + val); +} + +/* + * This configuration register in the Versatile and RealView + * family is uniformly present but appears more and more + * unutilized starting with the RealView series. + */ +#define SYS_CLCD 0x50 +#define SYS_CLCD_MODE_MASK (BIT(0)|BIT(1)) +#define SYS_CLCD_MODE_888 0 +#define SYS_CLCD_MODE_5551 BIT(0) +#define SYS_CLCD_MODE_565_R_LSB BIT(1) +#define SYS_CLCD_MODE_565_B_LSB (BIT(0)|BIT(1)) +#define SYS_CLCD_CONNECTOR_MASK (BIT(2)|BIT(3)|BIT(4)|BIT(5)) +#define SYS_CLCD_NLCDIOON BIT(2) +#define SYS_CLCD_VDDPOSSWITCH BIT(3) +#define SYS_CLCD_PWR3V5SWITCH BIT(4) +#define SYS_CLCD_VDDNEGSWITCH BIT(5) +#define SYS_CLCD_TSNSS BIT(6) /* touchscreen enable */ +#define SYS_CLCD_SSPEXP BIT(7) /* SSP expansion enable */ + +/* The Versatile can detect the connected panel type */ +#define SYS_CLCD_CLCDID_MASK (BIT(8)|BIT(9)|BIT(10)|BIT(11)|BIT(12)) +#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8) +#define SYS_CLCD_ID_SHARP_8_4 (0x01 << 8) +#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8) +#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) +#define SYS_CLCD_ID_VGA (0x1f << 8) + +#define SYS_CLCD_TSNDAV BIT(13) /* data ready from TS */ + +/* IB2 control register for the Versatile daughterboard */ +#define IB2_CTRL 0x00 +#define IB2_CTRL_LCD_SD BIT(1) /* 1 = shut down LCD */ +#define IB2_CTRL_LCD_BL_ON BIT(0) +#define IB2_CTRL_LCD_MASK (BIT(0)|BIT(1)) + +static void versatile_clcd_disable(struct clcd_fb *fb) +{ + dev_info(&fb->dev->dev, "disable Versatile CLCD connectors\n"); + regmap_update_bits(versatile_syscon_map, + SYS_CLCD, + SYS_CLCD_CONNECTOR_MASK, + 0); + + /* If we're on an IB2 daughterboard, turn off display */ + if (versatile_ib2_map) { + dev_info(&fb->dev->dev, "disable IB2 display\n"); + regmap_update_bits(versatile_ib2_map, + IB2_CTRL, + IB2_CTRL_LCD_MASK, + IB2_CTRL_LCD_SD); + } +} + +static void versatile_clcd_enable(struct clcd_fb *fb) +{ + struct fb_var_screeninfo *var = &fb->fb.var; + u32 val = 0; + + dev_info(&fb->dev->dev, "enable Versatile CLCD connectors\n"); + switch (var->green.length) { + case 5: + val |= SYS_CLCD_MODE_5551; + break; + case 6: + if (var->red.offset == 0) + val |= SYS_CLCD_MODE_565_R_LSB; + else + val |= SYS_CLCD_MODE_565_B_LSB; + break; + case 8: + val |= SYS_CLCD_MODE_888; + break; + } + + /* Set up the MUX */ + regmap_update_bits(versatile_syscon_map, + SYS_CLCD, + SYS_CLCD_MODE_MASK, + val); + + /* Then enable the display */ + regmap_update_bits(versatile_syscon_map, + SYS_CLCD, + SYS_CLCD_CONNECTOR_MASK, + SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH); + + /* If we're on an IB2 daughterboard, turn on display */ + if (versatile_ib2_map) { + dev_info(&fb->dev->dev, "enable IB2 display\n"); + regmap_update_bits(versatile_ib2_map, + IB2_CTRL, + IB2_CTRL_LCD_MASK, + IB2_CTRL_LCD_BL_ON); + } +} + +static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs) +{ + clcdfb_decode(fb, regs); + + /* Always clear BGR for RGB565: we do the routing externally */ + if (fb->fb.var.green.length == 6) + regs->cntl &= ~CNTL_BGR; +} + +static void realview_clcd_disable(struct clcd_fb *fb) +{ + dev_info(&fb->dev->dev, "disable RealView CLCD connectors\n"); + regmap_update_bits(versatile_syscon_map, + SYS_CLCD, + SYS_CLCD_CONNECTOR_MASK, + 0); +} + +static void realview_clcd_enable(struct clcd_fb *fb) +{ + dev_info(&fb->dev->dev, "enable RealView CLCD connectors\n"); + regmap_update_bits(versatile_syscon_map, + SYS_CLCD, + SYS_CLCD_CONNECTOR_MASK, + SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH); +} + +struct versatile_panel { + u32 id; + char *compatible; + bool ib2; +}; + +static const struct versatile_panel versatile_panels[] = { + { + .id = SYS_CLCD_ID_VGA, + .compatible = "VGA", + }, + { + .id = SYS_CLCD_ID_SANYO_3_8, + .compatible = "sanyo,tm38qv67a02a", + }, + { + .id = SYS_CLCD_ID_SHARP_8_4, + .compatible = "sharp,lq084v1dg21", + }, + { + .id = SYS_CLCD_ID_EPSON_2_2, + .compatible = "epson,l2f50113t00", + }, + { + .id = SYS_CLCD_ID_SANYO_2_5, + .compatible = "sanyo,alr252rgt", + .ib2 = true, + }, +}; + +static void versatile_panel_probe(struct device *dev, + struct device_node *endpoint) +{ + struct versatile_panel const *vpanel = NULL; + struct device_node *panel = NULL; + u32 val; + int ret; + int i; + + /* + * The Versatile CLCD has a panel auto-detection mechanism. + * We use this and look for the compatible panel in the + * device tree. + */ + ret = regmap_read(versatile_syscon_map, SYS_CLCD, &val); + if (ret) { + dev_err(dev, "cannot read CLCD syscon register\n"); + return; + } + val &= SYS_CLCD_CLCDID_MASK; + + /* First find corresponding panel information */ + for (i = 0; i < ARRAY_SIZE(versatile_panels); i++) { + vpanel = &versatile_panels[i]; + + if (val == vpanel->id) { + dev_err(dev, "autodetected panel \"%s\"\n", + vpanel->compatible); + break; + } + } + if (i == ARRAY_SIZE(versatile_panels)) { + dev_err(dev, "could not auto-detect panel\n"); + return; + } + + panel = of_graph_get_remote_port_parent(endpoint); + if (!panel) { + dev_err(dev, "could not locate panel in DT\n"); + return; + } + if (!of_device_is_compatible(panel, vpanel->compatible)) + dev_err(dev, "panel in DT is not compatible with the " + "auto-detected panel, continuing anyway\n"); + + /* + * If we have a Sanyo 2.5" port + * that we're running on an IB2 and proceed to look for the + * IB2 syscon regmap. + */ + if (!vpanel->ib2) + return; + + versatile_ib2_map = syscon_regmap_lookup_by_compatible( + "arm,versatile-ib2-syscon"); + if (IS_ERR(versatile_ib2_map)) { + dev_err(dev, "could not locate IB2 control register\n"); + versatile_ib2_map = NULL; + return; + } +} + +int versatile_clcd_init_panel(struct clcd_fb *fb, + struct device_node *endpoint) +{ + const struct of_device_id *clcd_id; + enum versatile_clcd versatile_clcd_type; + struct device_node *np; + struct regmap *map; + struct device *dev = &fb->dev->dev; + + np = of_find_matching_node_and_match(NULL, versatile_clcd_of_match, + &clcd_id); + if (!np) { + dev_err(dev, "no Versatile syscon node\n"); + return -ENODEV; + } + versatile_clcd_type = (enum versatile_clcd)clcd_id->data; + + map = syscon_node_to_regmap(np); + if (IS_ERR(map)) { + dev_err(dev, "no Versatile syscon regmap\n"); + return PTR_ERR(map); + } + + switch (versatile_clcd_type) { + case INTEGRATOR_CLCD_CM: + versatile_syscon_map = map; + fb->board->enable = integrator_clcd_enable; + /* Override the caps, we have only these */ + fb->board->caps = CLCD_CAP_5551 | CLCD_CAP_RGB565 | + CLCD_CAP_888; + dev_info(dev, "set up callbacks for Integrator PL110\n"); + break; + case VERSATILE_CLCD: + versatile_syscon_map = map; + fb->board->enable = versatile_clcd_enable; + fb->board->disable = versatile_clcd_disable; + fb->board->decode = versatile_clcd_decode; + versatile_panel_probe(dev, endpoint); + dev_info(dev, "set up callbacks for Versatile\n"); + break; + case REALVIEW_CLCD_EB: + case REALVIEW_CLCD_PB1176: + case REALVIEW_CLCD_PB11MP: + case REALVIEW_CLCD_PBA8: + case REALVIEW_CLCD_PBX: + versatile_syscon_map = map; + fb->board->enable = realview_clcd_enable; + fb->board->disable = realview_clcd_disable; + dev_info(dev, "set up callbacks for RealView PL111\n"); + break; + default: + dev_info(dev, "unknown Versatile system controller\n"); + break; + } + + return 0; +} +EXPORT_SYMBOL_GPL(versatile_clcd_init_panel); +#endif diff --git a/drivers/video/fbdev/amba-clcd-versatile.h b/drivers/video/fbdev/amba-clcd-versatile.h new file mode 100644 index 000000000000..1b14359c2cf6 --- /dev/null +++ b/drivers/video/fbdev/amba-clcd-versatile.h @@ -0,0 +1,17 @@ +/* + * Special local versatile callbacks + */ +#include <linux/of.h> +#include <linux/amba/bus.h> +#include <linux/platform_data/video-clcd-versatile.h> + +#if defined(CONFIG_PLAT_VERSATILE_CLCD) && defined(CONFIG_OF) +int versatile_clcd_init_panel(struct clcd_fb *fb, + struct device_node *endpoint); +#else +static inline int versatile_clcd_init_panel(struct clcd_fb *fb, + struct device_node *endpoint) +{ + return 0; +} +#endif diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c index 9b158869cb89..ec2671d98abc 100644 --- a/drivers/video/fbdev/amba-clcd.c +++ b/drivers/video/fbdev/amba-clcd.c @@ -30,10 +30,14 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_graph.h> +#include <linux/backlight.h> #include <video/display_timing.h> #include <video/of_display_timing.h> #include <video/videomode.h> +#include "amba-clcd-nomadik.h" +#include "amba-clcd-versatile.h" + #define to_clcd(info) container_of(info, struct clcd_fb, fb) /* This is limited to 16 characters when displayed by X startup */ @@ -71,6 +75,11 @@ static void clcdfb_disable(struct clcd_fb *fb) if (fb->board->disable) fb->board->disable(fb); + if (fb->panel->backlight) { + fb->panel->backlight->props.power = FB_BLANK_POWERDOWN; + backlight_update_status(fb->panel->backlight); + } + val = readl(fb->regs + fb->off_cntl); if (val & CNTL_LCDPWR) { val &= ~CNTL_LCDPWR; @@ -117,6 +126,14 @@ static void clcdfb_enable(struct clcd_fb *fb, u32 cntl) writel(cntl, fb->regs + fb->off_cntl); /* + * Turn on backlight + */ + if (fb->panel->backlight) { + fb->panel->backlight->props.power = FB_BLANK_UNBLANK; + backlight_update_status(fb->panel->backlight); + } + + /* * finally, enable the interface. */ if (fb->board->enable) @@ -211,6 +228,15 @@ clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var) var->blue.length = 4; } break; + case 24: + if (fb->vendor->packed_24_bit_pixels) { + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + } else { + ret = -EINVAL; + } + break; case 32: /* If we can't do 888, reject */ caps &= CLCD_CAP_888; @@ -297,6 +323,12 @@ static int clcdfb_set_par(struct fb_info *info) clcdfb_disable(fb); + /* Some variants must be clocked here */ + if (fb->vendor->clock_timregs && !fb->clk_enabled) { + fb->clk_enabled = true; + clk_enable(fb->clk); + } + writel(regs.tim0, fb->regs + CLCD_TIM0); writel(regs.tim1, fb->regs + CLCD_TIM1); writel(regs.tim2, fb->regs + CLCD_TIM2); @@ -551,7 +583,7 @@ static int clcdfb_register(struct clcd_fb *fb) #ifdef CONFIG_OF static int clcdfb_of_get_dpi_panel_mode(struct device_node *node, - struct fb_videomode *mode) + struct clcd_panel *clcd_panel) { int err; struct display_timing timing; @@ -563,10 +595,31 @@ static int clcdfb_of_get_dpi_panel_mode(struct device_node *node, videomode_from_timing(&timing, &video); - err = fb_videomode_from_videomode(&video, mode); + err = fb_videomode_from_videomode(&video, &clcd_panel->mode); if (err) return err; + /* Set up some inversion flags */ + if (timing.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE) + clcd_panel->tim2 |= TIM2_IPC; + else if (!(timing.flags & DISPLAY_FLAGS_PIXDATA_POSEDGE)) + /* + * To preserve backwards compatibility, the IPC (inverted + * pixel clock) flag needs to be set on any display that + * doesn't explicitly specify that the pixel clock is + * active on the negative or positive edge. + */ + clcd_panel->tim2 |= TIM2_IPC; + + if (timing.flags & DISPLAY_FLAGS_HSYNC_LOW) + clcd_panel->tim2 |= TIM2_IHS; + + if (timing.flags & DISPLAY_FLAGS_VSYNC_LOW) + clcd_panel->tim2 |= TIM2_IVS; + + if (timing.flags & DISPLAY_FLAGS_DE_LOW) + clcd_panel->tim2 |= TIM2_IOE; + return 0; } @@ -576,11 +629,34 @@ static int clcdfb_snprintf_mode(char *buf, int size, struct fb_videomode *mode) mode->refresh); } +static int clcdfb_of_get_backlight(struct device_node *endpoint, + struct clcd_panel *clcd_panel) +{ + struct device_node *panel; + struct device_node *backlight; + + panel = of_graph_get_remote_port_parent(endpoint); + if (!panel) + return -ENODEV; + + /* Look up the optional backlight phandle */ + backlight = of_parse_phandle(panel, "backlight", 0); + if (backlight) { + clcd_panel->backlight = of_find_backlight_by_node(backlight); + of_node_put(backlight); + + if (!clcd_panel->backlight) + return -EPROBE_DEFER; + } + return 0; +} + static int clcdfb_of_get_mode(struct device *dev, struct device_node *endpoint, - struct fb_videomode *mode) + struct clcd_panel *clcd_panel) { int err; struct device_node *panel; + struct fb_videomode *mode; char *name; int len; @@ -590,11 +666,12 @@ static int clcdfb_of_get_mode(struct device *dev, struct device_node *endpoint, /* Only directly connected DPI panels supported for now */ if (of_device_is_compatible(panel, "panel-dpi")) - err = clcdfb_of_get_dpi_panel_mode(panel, mode); + err = clcdfb_of_get_dpi_panel_mode(panel, clcd_panel); else err = -ENOENT; if (err) return err; + mode = &clcd_panel->mode; len = clcdfb_snprintf_mode(NULL, 0, mode); name = devm_kzalloc(dev, len + 1, GFP_KERNEL); @@ -616,6 +693,7 @@ static int clcdfb_of_init_tft_panel(struct clcd_fb *fb, u32 r0, u32 g0, u32 b0) } panels[] = { { 0x110, 1, 7, 13, CLCD_CAP_5551 }, { 0x110, 0, 8, 16, CLCD_CAP_888 }, + { 0x110, 16, 8, 0, CLCD_CAP_888 }, { 0x111, 4, 14, 20, CLCD_CAP_444 }, { 0x111, 3, 11, 19, CLCD_CAP_444 | CLCD_CAP_5551 }, { 0x111, 3, 10, 19, CLCD_CAP_444 | CLCD_CAP_5551 | @@ -625,8 +703,8 @@ static int clcdfb_of_init_tft_panel(struct clcd_fb *fb, u32 r0, u32 g0, u32 b0) }; int i; - /* Bypass pixel clock divider, data output on the falling edge */ - fb->panel->tim2 = TIM2_BCD | TIM2_IPC; + /* Bypass pixel clock divider */ + fb->panel->tim2 |= TIM2_BCD; /* TFT display, vert. comp. interrupt at the start of the back porch */ fb->panel->cntl |= CNTL_LCDTFT | CNTL_LCDVCOMP(1); @@ -643,6 +721,49 @@ static int clcdfb_of_init_tft_panel(struct clcd_fb *fb, u32 r0, u32 g0, u32 b0) fb->panel->caps = panels[i].caps; } + /* + * If we actually physically connected the R lines to B and + * vice versa + */ + if (r0 != 0 && b0 == 0) + fb->panel->bgr_connection = true; + + if (fb->panel->caps && fb->vendor->st_bitmux_control) { + /* + * Set up the special bits for the Nomadik control register + * (other platforms tend to do this through an external + * register). + */ + + /* Offset of the highest used color */ + int maxoff = max3(r0, g0, b0); + /* Most significant bit out, highest used bit */ + int msb = 0; + + if (fb->panel->caps & CLCD_CAP_888) { + msb = maxoff + 8 - 1; + } else if (fb->panel->caps & CLCD_CAP_565) { + msb = maxoff + 5 - 1; + fb->panel->cntl |= CNTL_ST_1XBPP_565; + } else if (fb->panel->caps & CLCD_CAP_5551) { + msb = maxoff + 5 - 1; + fb->panel->cntl |= CNTL_ST_1XBPP_5551; + } else if (fb->panel->caps & CLCD_CAP_444) { + msb = maxoff + 4 - 1; + fb->panel->cntl |= CNTL_ST_1XBPP_444; + } + + /* Send out as many bits as we need */ + if (msb > 17) + fb->panel->cntl |= CNTL_ST_CDWID_24; + else if (msb > 15) + fb->panel->cntl |= CNTL_ST_CDWID_18; + else if (msb > 11) + fb->panel->cntl |= CNTL_ST_CDWID_16; + else + fb->panel->cntl |= CNTL_ST_CDWID_12; + } + return fb->panel->caps ? 0 : -EINVAL; } @@ -658,11 +779,24 @@ static int clcdfb_of_init_display(struct clcd_fb *fb) if (!fb->panel) return -ENOMEM; + /* + * Fetch the panel endpoint. + */ endpoint = of_graph_get_next_endpoint(fb->dev->dev.of_node, NULL); if (!endpoint) return -ENODEV; - err = clcdfb_of_get_mode(&fb->dev->dev, endpoint, &fb->panel->mode); + if (fb->vendor->init_panel) { + err = fb->vendor->init_panel(fb, endpoint); + if (err) + return err; + } + + err = clcdfb_of_get_backlight(endpoint, fb->panel); + if (err) + return err; + + err = clcdfb_of_get_mode(&fb->dev->dev, endpoint, fb->panel); if (err) return err; @@ -693,11 +827,11 @@ static int clcdfb_of_init_display(struct clcd_fb *fb) if (of_property_read_u32_array(endpoint, "arm,pl11x,tft-r0g0b0-pads", - tft_r0b0g0, ARRAY_SIZE(tft_r0b0g0)) == 0) - return clcdfb_of_init_tft_panel(fb, tft_r0b0g0[0], - tft_r0b0g0[1], tft_r0b0g0[2]); + tft_r0b0g0, ARRAY_SIZE(tft_r0b0g0)) != 0) + return -ENOENT; - return -ENOENT; + return clcdfb_of_init_tft_panel(fb, tft_r0b0g0[0], + tft_r0b0g0[1], tft_r0b0g0[2]); } static int clcdfb_of_vram_setup(struct clcd_fb *fb) @@ -818,6 +952,7 @@ static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev) static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id) { struct clcd_board *board = dev_get_platdata(&dev->dev); + struct clcd_vendor_data *vendor = id->data; struct clcd_fb *fb; int ret; @@ -827,6 +962,12 @@ static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id) if (!board) return -EINVAL; + if (vendor->init_board) { + ret = vendor->init_board(dev, board); + if (ret) + return ret; + } + ret = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)); if (ret) goto out; @@ -845,17 +986,18 @@ static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id) } fb->dev = dev; + fb->vendor = vendor; fb->board = board; - dev_info(&fb->dev->dev, "PL%03x rev%u at 0x%08llx\n", - amba_part(dev), amba_rev(dev), + dev_info(&fb->dev->dev, "PL%03x designer %02x rev%u at 0x%08llx\n", + amba_part(dev), amba_manf(dev), amba_rev(dev), (unsigned long long)dev->res.start); ret = fb->board->setup(fb); if (ret) goto free_fb; - ret = clcdfb_register(fb); + ret = clcdfb_register(fb); if (ret == 0) { amba_set_drvdata(dev, fb); goto out; @@ -891,10 +1033,30 @@ static int clcdfb_remove(struct amba_device *dev) return 0; } +static struct clcd_vendor_data vendor_arm = { + /* Sets up the versatile board displays */ + .init_panel = versatile_clcd_init_panel, +}; + +static struct clcd_vendor_data vendor_nomadik = { + .clock_timregs = true, + .packed_24_bit_pixels = true, + .st_bitmux_control = true, + .init_board = nomadik_clcd_init_board, + .init_panel = nomadik_clcd_init_panel, +}; + static struct amba_id clcdfb_id_table[] = { { .id = 0x00041110, .mask = 0x000ffffe, + .data = &vendor_arm, + }, + /* ST Electronics Nomadik variant */ + { + .id = 0x00180110, + .mask = 0x00fffffe, + .data = &vendor_nomadik, }, { 0, 0 }, }; diff --git a/drivers/video/fbdev/arcfb.c b/drivers/video/fbdev/arcfb.c index 1b0b233b8b39..1928cb2b5386 100644 --- a/drivers/video/fbdev/arcfb.c +++ b/drivers/video/fbdev/arcfb.c @@ -79,7 +79,7 @@ struct arcfb_par { spinlock_t lock; }; -static struct fb_fix_screeninfo arcfb_fix = { +static const struct fb_fix_screeninfo arcfb_fix = { .id = "arcfb", .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_MONO01, @@ -89,7 +89,7 @@ static struct fb_fix_screeninfo arcfb_fix = { .accel = FB_ACCEL_NONE, }; -static struct fb_var_screeninfo arcfb_var = { +static const struct fb_var_screeninfo arcfb_var = { .xres = 128, .yres = 64, .xres_virtual = 128, diff --git a/drivers/video/fbdev/asiliantfb.c b/drivers/video/fbdev/asiliantfb.c index 7e8ddf00ccc2..91eea4583382 100644 --- a/drivers/video/fbdev/asiliantfb.c +++ b/drivers/video/fbdev/asiliantfb.c @@ -474,7 +474,7 @@ static void chips_hw_init(struct fb_info *p) write_fr(chips_init_fr[i].addr, chips_init_fr[i].data); } -static struct fb_fix_screeninfo asiliantfb_fix = { +static const struct fb_fix_screeninfo asiliantfb_fix = { .id = "Asiliant 69000", .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_PSEUDOCOLOR, @@ -483,7 +483,7 @@ static struct fb_fix_screeninfo asiliantfb_fix = { .smem_len = 0x200000, /* 2MB */ }; -static struct fb_var_screeninfo asiliantfb_var = { +static const struct fb_var_screeninfo asiliantfb_var = { .xres = 640, .yres = 480, .xres_virtual = 640, diff --git a/drivers/video/fbdev/aty/aty128fb.c b/drivers/video/fbdev/aty/aty128fb.c index 0a4626886b00..fa07242a78d2 100644 --- a/drivers/video/fbdev/aty/aty128fb.c +++ b/drivers/video/fbdev/aty/aty128fb.c @@ -93,7 +93,7 @@ #ifndef CONFIG_PPC_PMAC /* default mode */ -static struct fb_var_screeninfo default_var = { +static const struct fb_var_screeninfo default_var = { /* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */ 640, 480, 640, 480, 0, 0, 8, 0, {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, @@ -104,7 +104,7 @@ static struct fb_var_screeninfo default_var = { #else /* CONFIG_PPC_PMAC */ /* default to 1024x768 at 75Hz on PPC - this will work * on the iMac, the usual 640x480 @ 60Hz doesn't. */ -static struct fb_var_screeninfo default_var = { +static const struct fb_var_screeninfo default_var = { /* 1024x768, 75 Hz, Non-Interlaced (78.75 MHz dotclock) */ 1024, 768, 1024, 768, 0, 0, 8, 0, {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, @@ -375,7 +375,7 @@ static const struct aty128_meminfo ddr_sgram = { .name = "64-bit DDR SGRAM", }; -static struct fb_fix_screeninfo aty128fb_fix = { +static const struct fb_fix_screeninfo aty128fb_fix = { .id = "ATY Rage128", .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_PSEUDOCOLOR, diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c index f34ed47fcaf8..11026e726b68 100644 --- a/drivers/video/fbdev/aty/atyfb_base.c +++ b/drivers/video/fbdev/aty/atyfb_base.c @@ -212,7 +212,7 @@ struct pci_mmap_map { unsigned long prot_mask; }; -static struct fb_fix_screeninfo atyfb_fix = { +static const struct fb_fix_screeninfo atyfb_fix = { .id = "ATY Mach64", .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_PSEUDOCOLOR, diff --git a/drivers/video/fbdev/aty/radeon_monitor.c b/drivers/video/fbdev/aty/radeon_monitor.c index f1ce229de78d..278b421ab3fe 100644 --- a/drivers/video/fbdev/aty/radeon_monitor.c +++ b/drivers/video/fbdev/aty/radeon_monitor.c @@ -4,7 +4,7 @@ #include "../edid.h" -static struct fb_var_screeninfo radeonfb_default_var = { +static const struct fb_var_screeninfo radeonfb_default_var = { .xres = 640, .yres = 480, .xres_virtual = 640, diff --git a/drivers/video/fbdev/bfin_adv7393fb.c b/drivers/video/fbdev/bfin_adv7393fb.c index e2d7d039ce3b..542ffaddc6ab 100644 --- a/drivers/video/fbdev/bfin_adv7393fb.c +++ b/drivers/video/fbdev/bfin_adv7393fb.c @@ -375,7 +375,6 @@ static int bfin_adv7393_fb_probe(struct i2c_client *client, { int ret = 0; struct proc_dir_entry *entry; - int num_modes = ARRAY_SIZE(known_modes); struct adv7393fb_device *fbdev = NULL; @@ -384,7 +383,7 @@ static int bfin_adv7393_fb_probe(struct i2c_client *client, return -EINVAL; } - if (mode > num_modes) { + if (mode >= ARRAY_SIZE(known_modes)) { dev_err(&client->dev, "mode %d: not supported", mode); return -EFAULT; } @@ -797,7 +796,7 @@ static struct i2c_driver bfin_adv7393_fb_driver = { static int __init bfin_adv7393_fb_driver_init(void) { -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) request_module("i2c-bfin-twi"); #else request_module("i2c-gpio"); diff --git a/drivers/video/fbdev/efifb.c b/drivers/video/fbdev/efifb.c index 924bad45c176..37a37c4d04cb 100644 --- a/drivers/video/fbdev/efifb.c +++ b/drivers/video/fbdev/efifb.c @@ -50,9 +50,9 @@ static int efifb_setcolreg(unsigned regno, unsigned red, unsigned green, return 1; if (regno < 16) { - red >>= 8; - green >>= 8; - blue >>= 8; + red >>= 16 - info->var.red.length; + green >>= 16 - info->var.green.length; + blue >>= 16 - info->var.blue.length; ((u32 *)(info->pseudo_palette))[regno] = (red << info->var.red.offset) | (green << info->var.green.offset) | diff --git a/drivers/video/fbdev/exynos/Kconfig b/drivers/video/fbdev/exynos/Kconfig deleted file mode 100644 index d916bef94f25..000000000000 --- a/drivers/video/fbdev/exynos/Kconfig +++ /dev/null @@ -1,32 +0,0 @@ -# -# Exynos Video configuration -# - -menuconfig EXYNOS_VIDEO - tristate "Exynos Video driver support" - depends on ARCH_S5PV210 || ARCH_EXYNOS - help - This enables support for EXYNOS Video device. - -if EXYNOS_VIDEO - -# -# MIPI DSI driver -# - -config EXYNOS_MIPI_DSI - tristate "EXYNOS MIPI DSI driver support." - select GENERIC_PHY - help - This enables support for MIPI-DSI device. - -config EXYNOS_LCD_S6E8AX0 - tristate "S6E8AX0 MIPI AMOLED LCD Driver" - depends on EXYNOS_MIPI_DSI && BACKLIGHT_CLASS_DEVICE - depends on (LCD_CLASS_DEVICE = y) - default n - help - If you have an S6E8AX0 MIPI AMOLED LCD Panel, say Y to enable its - LCD control driver. - -endif # EXYNOS_VIDEO diff --git a/drivers/video/fbdev/exynos/Makefile b/drivers/video/fbdev/exynos/Makefile deleted file mode 100644 index 02d8dc522fea..000000000000 --- a/drivers/video/fbdev/exynos/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Makefile for the exynos video drivers. -# - -obj-$(CONFIG_EXYNOS_MIPI_DSI) += exynos-mipi-dsi-mod.o - -exynos-mipi-dsi-mod-objs += exynos_mipi_dsi.o exynos_mipi_dsi_common.o \ - exynos_mipi_dsi_lowlevel.o -obj-$(CONFIG_EXYNOS_LCD_S6E8AX0) += s6e8ax0.o diff --git a/drivers/video/fbdev/exynos/exynos_mipi_dsi.c b/drivers/video/fbdev/exynos/exynos_mipi_dsi.c deleted file mode 100644 index 92e4af3caaf8..000000000000 --- a/drivers/video/fbdev/exynos/exynos_mipi_dsi.c +++ /dev/null @@ -1,574 +0,0 @@ -/* linux/drivers/video/exynos/exynos_mipi_dsi.c - * - * Samsung SoC MIPI-DSIM driver. - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd - * - * InKi Dae, <inki.dae@samsung.com> - * Donghwa Lee, <dh09.lee@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/wait.h> -#include <linux/fs.h> -#include <linux/mm.h> -#include <linux/fb.h> -#include <linux/ctype.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/memory.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/kthread.h> -#include <linux/notifier.h> -#include <linux/phy/phy.h> -#include <linux/regulator/consumer.h> -#include <linux/pm_runtime.h> -#include <linux/err.h> - -#include <video/exynos_mipi_dsim.h> - -#include "exynos_mipi_dsi_common.h" -#include "exynos_mipi_dsi_lowlevel.h" - -struct mipi_dsim_ddi { - int bus_id; - struct list_head list; - struct mipi_dsim_lcd_device *dsim_lcd_dev; - struct mipi_dsim_lcd_driver *dsim_lcd_drv; -}; - -static LIST_HEAD(dsim_ddi_list); - -static DEFINE_MUTEX(mipi_dsim_lock); - -static struct mipi_dsim_platform_data *to_dsim_plat(struct platform_device - *pdev) -{ - return pdev->dev.platform_data; -} - -static struct regulator_bulk_data supplies[] = { - { .supply = "vdd11", }, - { .supply = "vdd18", }, -}; - -static int exynos_mipi_regulator_enable(struct mipi_dsim_device *dsim) -{ - int ret; - - mutex_lock(&dsim->lock); - ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies); - mutex_unlock(&dsim->lock); - - return ret; -} - -static int exynos_mipi_regulator_disable(struct mipi_dsim_device *dsim) -{ - int ret; - - mutex_lock(&dsim->lock); - ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies); - mutex_unlock(&dsim->lock); - - return ret; -} - -/* update all register settings to MIPI DSI controller. */ -static void exynos_mipi_update_cfg(struct mipi_dsim_device *dsim) -{ - /* - * data from Display controller(FIMD) is not transferred in video mode - * but in case of command mode, all settings is not updated to - * registers. - */ - exynos_mipi_dsi_stand_by(dsim, 0); - - exynos_mipi_dsi_init_dsim(dsim); - exynos_mipi_dsi_init_link(dsim); - - exynos_mipi_dsi_set_hs_enable(dsim); - - /* set display timing. */ - exynos_mipi_dsi_set_display_mode(dsim, dsim->dsim_config); - - exynos_mipi_dsi_init_interrupt(dsim); - - /* - * data from Display controller(FIMD) is transferred in video mode - * but in case of command mode, all settings are updated to registers. - */ - exynos_mipi_dsi_stand_by(dsim, 1); -} - -static int exynos_mipi_dsi_early_blank_mode(struct mipi_dsim_device *dsim, - int power) -{ - struct mipi_dsim_lcd_driver *client_drv = dsim->dsim_lcd_drv; - struct mipi_dsim_lcd_device *client_dev = dsim->dsim_lcd_dev; - - switch (power) { - case FB_BLANK_POWERDOWN: - if (dsim->suspended) - return 0; - - if (client_drv && client_drv->suspend) - client_drv->suspend(client_dev); - - clk_disable(dsim->clock); - - exynos_mipi_regulator_disable(dsim); - - dsim->suspended = true; - - break; - default: - break; - } - - return 0; -} - -static int exynos_mipi_dsi_blank_mode(struct mipi_dsim_device *dsim, int power) -{ - struct mipi_dsim_lcd_driver *client_drv = dsim->dsim_lcd_drv; - struct mipi_dsim_lcd_device *client_dev = dsim->dsim_lcd_dev; - - switch (power) { - case FB_BLANK_UNBLANK: - if (!dsim->suspended) - return 0; - - /* lcd panel power on. */ - if (client_drv && client_drv->power_on) - client_drv->power_on(client_dev, 1); - - exynos_mipi_regulator_enable(dsim); - - /* enable MIPI-DSI PHY. */ - phy_power_on(dsim->phy); - - clk_enable(dsim->clock); - - exynos_mipi_update_cfg(dsim); - - /* set lcd panel sequence commands. */ - if (client_drv && client_drv->set_sequence) - client_drv->set_sequence(client_dev); - - dsim->suspended = false; - - break; - case FB_BLANK_NORMAL: - /* TODO. */ - break; - default: - break; - } - - return 0; -} - -int exynos_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device *lcd_dev) -{ - struct mipi_dsim_ddi *dsim_ddi; - - if (!lcd_dev->name) { - pr_err("dsim_lcd_device name is NULL.\n"); - return -EFAULT; - } - - dsim_ddi = kzalloc(sizeof(struct mipi_dsim_ddi), GFP_KERNEL); - if (!dsim_ddi) { - pr_err("failed to allocate dsim_ddi object.\n"); - return -ENOMEM; - } - - dsim_ddi->dsim_lcd_dev = lcd_dev; - - mutex_lock(&mipi_dsim_lock); - list_add_tail(&dsim_ddi->list, &dsim_ddi_list); - mutex_unlock(&mipi_dsim_lock); - - return 0; -} - -static struct mipi_dsim_ddi *exynos_mipi_dsi_find_lcd_device( - struct mipi_dsim_lcd_driver *lcd_drv) -{ - struct mipi_dsim_ddi *dsim_ddi, *next; - struct mipi_dsim_lcd_device *lcd_dev; - - mutex_lock(&mipi_dsim_lock); - - list_for_each_entry_safe(dsim_ddi, next, &dsim_ddi_list, list) { - if (!dsim_ddi) - goto out; - - lcd_dev = dsim_ddi->dsim_lcd_dev; - if (!lcd_dev) - continue; - - if ((strcmp(lcd_drv->name, lcd_dev->name)) == 0) { - /** - * bus_id would be used to identify - * connected bus. - */ - dsim_ddi->bus_id = lcd_dev->bus_id; - mutex_unlock(&mipi_dsim_lock); - - return dsim_ddi; - } - - list_del(&dsim_ddi->list); - kfree(dsim_ddi); - } - -out: - mutex_unlock(&mipi_dsim_lock); - - return NULL; -} - -int exynos_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver *lcd_drv) -{ - struct mipi_dsim_ddi *dsim_ddi; - - if (!lcd_drv->name) { - pr_err("dsim_lcd_driver name is NULL.\n"); - return -EFAULT; - } - - dsim_ddi = exynos_mipi_dsi_find_lcd_device(lcd_drv); - if (!dsim_ddi) { - pr_err("mipi_dsim_ddi object not found.\n"); - return -EFAULT; - } - - dsim_ddi->dsim_lcd_drv = lcd_drv; - - pr_info("registered panel driver(%s) to mipi-dsi driver.\n", - lcd_drv->name); - - return 0; - -} -EXPORT_SYMBOL_GPL(exynos_mipi_dsi_register_lcd_driver); - -static struct mipi_dsim_ddi *exynos_mipi_dsi_bind_lcd_ddi( - struct mipi_dsim_device *dsim, - const char *name) -{ - struct mipi_dsim_ddi *dsim_ddi, *next; - struct mipi_dsim_lcd_driver *lcd_drv; - struct mipi_dsim_lcd_device *lcd_dev; - int ret; - - mutex_lock(&dsim->lock); - - list_for_each_entry_safe(dsim_ddi, next, &dsim_ddi_list, list) { - lcd_drv = dsim_ddi->dsim_lcd_drv; - lcd_dev = dsim_ddi->dsim_lcd_dev; - if (!lcd_drv || !lcd_dev || - (dsim->id != dsim_ddi->bus_id)) - continue; - - dev_dbg(dsim->dev, "lcd_drv->id = %d, lcd_dev->id = %d\n", - lcd_drv->id, lcd_dev->id); - dev_dbg(dsim->dev, "lcd_dev->bus_id = %d, dsim->id = %d\n", - lcd_dev->bus_id, dsim->id); - - if ((strcmp(lcd_drv->name, name) == 0)) { - lcd_dev->master = dsim; - - lcd_dev->dev.parent = dsim->dev; - dev_set_name(&lcd_dev->dev, "%s", lcd_drv->name); - - ret = device_register(&lcd_dev->dev); - if (ret < 0) { - dev_err(dsim->dev, - "can't register %s, status %d\n", - dev_name(&lcd_dev->dev), ret); - mutex_unlock(&dsim->lock); - - return NULL; - } - - dsim->dsim_lcd_dev = lcd_dev; - dsim->dsim_lcd_drv = lcd_drv; - - mutex_unlock(&dsim->lock); - - return dsim_ddi; - } - } - - mutex_unlock(&dsim->lock); - - return NULL; -} - -/* define MIPI-DSI Master operations. */ -static struct mipi_dsim_master_ops master_ops = { - .cmd_read = exynos_mipi_dsi_rd_data, - .cmd_write = exynos_mipi_dsi_wr_data, - .get_dsim_frame_done = exynos_mipi_dsi_get_frame_done_status, - .clear_dsim_frame_done = exynos_mipi_dsi_clear_frame_done, - .set_early_blank_mode = exynos_mipi_dsi_early_blank_mode, - .set_blank_mode = exynos_mipi_dsi_blank_mode, -}; - -static int exynos_mipi_dsi_probe(struct platform_device *pdev) -{ - struct resource *res; - struct mipi_dsim_device *dsim; - struct mipi_dsim_config *dsim_config; - struct mipi_dsim_platform_data *dsim_pd; - struct mipi_dsim_ddi *dsim_ddi; - int ret = -EINVAL; - - dsim = devm_kzalloc(&pdev->dev, sizeof(struct mipi_dsim_device), - GFP_KERNEL); - if (!dsim) { - dev_err(&pdev->dev, "failed to allocate dsim object.\n"); - return -ENOMEM; - } - - dsim->pd = to_dsim_plat(pdev); - dsim->dev = &pdev->dev; - dsim->id = pdev->id; - - /* get mipi_dsim_platform_data. */ - dsim_pd = (struct mipi_dsim_platform_data *)dsim->pd; - if (dsim_pd == NULL) { - dev_err(&pdev->dev, "failed to get platform data for dsim.\n"); - return -EINVAL; - } - /* get mipi_dsim_config. */ - dsim_config = dsim_pd->dsim_config; - if (dsim_config == NULL) { - dev_err(&pdev->dev, "failed to get dsim config data.\n"); - return -EINVAL; - } - - dsim->dsim_config = dsim_config; - dsim->master_ops = &master_ops; - - mutex_init(&dsim->lock); - - ret = devm_regulator_bulk_get(&pdev->dev, ARRAY_SIZE(supplies), - supplies); - if (ret) { - dev_err(&pdev->dev, "Failed to get regulators: %d\n", ret); - return ret; - } - - dsim->phy = devm_phy_get(&pdev->dev, "dsim"); - if (IS_ERR(dsim->phy)) - return PTR_ERR(dsim->phy); - - dsim->clock = devm_clk_get(&pdev->dev, "dsim0"); - if (IS_ERR(dsim->clock)) { - dev_err(&pdev->dev, "failed to get dsim clock source\n"); - return -ENODEV; - } - - clk_enable(dsim->clock); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - dsim->reg_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(dsim->reg_base)) { - ret = PTR_ERR(dsim->reg_base); - goto error; - } - - mutex_init(&dsim->lock); - - /* bind lcd ddi matched with panel name. */ - dsim_ddi = exynos_mipi_dsi_bind_lcd_ddi(dsim, dsim_pd->lcd_panel_name); - if (!dsim_ddi) { - dev_err(&pdev->dev, "mipi_dsim_ddi object not found.\n"); - ret = -EINVAL; - goto error; - } - - ret = platform_get_irq(pdev, 0); - if (ret < 0) { - dev_err(&pdev->dev, "failed to request dsim irq resource\n"); - goto error; - } - dsim->irq = ret; - - init_completion(&dsim_wr_comp); - init_completion(&dsim_rd_comp); - platform_set_drvdata(pdev, dsim); - - ret = devm_request_irq(&pdev->dev, dsim->irq, - exynos_mipi_dsi_interrupt_handler, - IRQF_SHARED, dev_name(&pdev->dev), dsim); - if (ret != 0) { - dev_err(&pdev->dev, "failed to request dsim irq\n"); - ret = -EINVAL; - goto error; - } - - /* enable interrupts */ - exynos_mipi_dsi_init_interrupt(dsim); - - /* initialize mipi-dsi client(lcd panel). */ - if (dsim_ddi->dsim_lcd_drv && dsim_ddi->dsim_lcd_drv->probe) - dsim_ddi->dsim_lcd_drv->probe(dsim_ddi->dsim_lcd_dev); - - /* in case mipi-dsi has been enabled by bootloader */ - if (dsim_pd->enabled) { - exynos_mipi_regulator_enable(dsim); - goto done; - } - - /* lcd panel power on. */ - if (dsim_ddi->dsim_lcd_drv && dsim_ddi->dsim_lcd_drv->power_on) - dsim_ddi->dsim_lcd_drv->power_on(dsim_ddi->dsim_lcd_dev, 1); - - exynos_mipi_regulator_enable(dsim); - - /* enable MIPI-DSI PHY. */ - phy_power_on(dsim->phy); - - exynos_mipi_update_cfg(dsim); - - /* set lcd panel sequence commands. */ - if (dsim_ddi->dsim_lcd_drv && dsim_ddi->dsim_lcd_drv->set_sequence) - dsim_ddi->dsim_lcd_drv->set_sequence(dsim_ddi->dsim_lcd_dev); - - dsim->suspended = false; - -done: - platform_set_drvdata(pdev, dsim); - - dev_dbg(&pdev->dev, "%s() completed successfully (%s mode)\n", __func__, - dsim_config->e_interface == DSIM_COMMAND ? "CPU" : "RGB"); - - return 0; - -error: - clk_disable(dsim->clock); - return ret; -} - -static int exynos_mipi_dsi_remove(struct platform_device *pdev) -{ - struct mipi_dsim_device *dsim = platform_get_drvdata(pdev); - struct mipi_dsim_ddi *dsim_ddi, *next; - struct mipi_dsim_lcd_driver *dsim_lcd_drv; - - clk_disable(dsim->clock); - - list_for_each_entry_safe(dsim_ddi, next, &dsim_ddi_list, list) { - if (dsim_ddi) { - if (dsim->id != dsim_ddi->bus_id) - continue; - - dsim_lcd_drv = dsim_ddi->dsim_lcd_drv; - - if (dsim_lcd_drv->remove) - dsim_lcd_drv->remove(dsim_ddi->dsim_lcd_dev); - - kfree(dsim_ddi); - } - } - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int exynos_mipi_dsi_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct mipi_dsim_device *dsim = platform_get_drvdata(pdev); - struct mipi_dsim_lcd_driver *client_drv = dsim->dsim_lcd_drv; - struct mipi_dsim_lcd_device *client_dev = dsim->dsim_lcd_dev; - - disable_irq(dsim->irq); - - if (dsim->suspended) - return 0; - - if (client_drv && client_drv->suspend) - client_drv->suspend(client_dev); - - /* disable MIPI-DSI PHY. */ - phy_power_off(dsim->phy); - - clk_disable(dsim->clock); - - exynos_mipi_regulator_disable(dsim); - - dsim->suspended = true; - - return 0; -} - -static int exynos_mipi_dsi_resume(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct mipi_dsim_device *dsim = platform_get_drvdata(pdev); - struct mipi_dsim_lcd_driver *client_drv = dsim->dsim_lcd_drv; - struct mipi_dsim_lcd_device *client_dev = dsim->dsim_lcd_dev; - - enable_irq(dsim->irq); - - if (!dsim->suspended) - return 0; - - /* lcd panel power on. */ - if (client_drv && client_drv->power_on) - client_drv->power_on(client_dev, 1); - - exynos_mipi_regulator_enable(dsim); - - /* enable MIPI-DSI PHY. */ - phy_power_on(dsim->phy); - - clk_enable(dsim->clock); - - exynos_mipi_update_cfg(dsim); - - /* set lcd panel sequence commands. */ - if (client_drv && client_drv->set_sequence) - client_drv->set_sequence(client_dev); - - dsim->suspended = false; - - return 0; -} -#endif - -static const struct dev_pm_ops exynos_mipi_dsi_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(exynos_mipi_dsi_suspend, exynos_mipi_dsi_resume) -}; - -static struct platform_driver exynos_mipi_dsi_driver = { - .probe = exynos_mipi_dsi_probe, - .remove = exynos_mipi_dsi_remove, - .driver = { - .name = "exynos-mipi-dsim", - .pm = &exynos_mipi_dsi_pm_ops, - }, -}; - -module_platform_driver(exynos_mipi_dsi_driver); - -MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>"); -MODULE_DESCRIPTION("Samsung SoC MIPI-DSI driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.c b/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.c deleted file mode 100644 index 2358a2fbbbcd..000000000000 --- a/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.c +++ /dev/null @@ -1,880 +0,0 @@ -/* linux/drivers/video/exynos/exynos_mipi_dsi_common.c - * - * Samsung SoC MIPI-DSI common driver. - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd - * - * InKi Dae, <inki.dae@samsung.com> - * Donghwa Lee, <dh09.lee@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/mutex.h> -#include <linux/wait.h> -#include <linux/fs.h> -#include <linux/mm.h> -#include <linux/fb.h> -#include <linux/ctype.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/memory.h> -#include <linux/delay.h> -#include <linux/irqreturn.h> -#include <linux/kthread.h> - -#include <video/mipi_display.h> -#include <video/exynos_mipi_dsim.h> - -#include "exynos_mipi_dsi_regs.h" -#include "exynos_mipi_dsi_lowlevel.h" -#include "exynos_mipi_dsi_common.h" - -#define MIPI_FIFO_TIMEOUT msecs_to_jiffies(250) -#define MIPI_RX_FIFO_READ_DONE 0x30800002 -#define MIPI_MAX_RX_FIFO 20 -#define MHZ (1000 * 1000) -#define FIN_HZ (24 * MHZ) - -#define DFIN_PLL_MIN_HZ (6 * MHZ) -#define DFIN_PLL_MAX_HZ (12 * MHZ) - -#define DFVCO_MIN_HZ (500 * MHZ) -#define DFVCO_MAX_HZ (1000 * MHZ) - -#define TRY_GET_FIFO_TIMEOUT (5000 * 2) -#define TRY_FIFO_CLEAR (10) - -/* MIPI-DSIM status types. */ -enum { - DSIM_STATE_INIT, /* should be initialized. */ - DSIM_STATE_STOP, /* CPU and LCDC are LP mode. */ - DSIM_STATE_HSCLKEN, /* HS clock was enabled. */ - DSIM_STATE_ULPS -}; - -/* define DSI lane types. */ -enum { - DSIM_LANE_CLOCK = (1 << 0), - DSIM_LANE_DATA0 = (1 << 1), - DSIM_LANE_DATA1 = (1 << 2), - DSIM_LANE_DATA2 = (1 << 3), - DSIM_LANE_DATA3 = (1 << 4) -}; - -static unsigned int dpll_table[15] = { - 100, 120, 170, 220, 270, - 320, 390, 450, 510, 560, - 640, 690, 770, 870, 950 -}; - -irqreturn_t exynos_mipi_dsi_interrupt_handler(int irq, void *dev_id) -{ - struct mipi_dsim_device *dsim = dev_id; - unsigned int intsrc, intmsk; - - intsrc = exynos_mipi_dsi_read_interrupt(dsim); - intmsk = exynos_mipi_dsi_read_interrupt_mask(dsim); - intmsk = ~intmsk & intsrc; - - if (intsrc & INTMSK_RX_DONE) { - complete(&dsim_rd_comp); - dev_dbg(dsim->dev, "MIPI INTMSK_RX_DONE\n"); - } - if (intsrc & INTMSK_FIFO_EMPTY) { - complete(&dsim_wr_comp); - dev_dbg(dsim->dev, "MIPI INTMSK_FIFO_EMPTY\n"); - } - - exynos_mipi_dsi_clear_interrupt(dsim, intmsk); - - return IRQ_HANDLED; -} - -/* - * write long packet to mipi dsi slave - * @dsim: mipi dsim device structure. - * @data0: packet data to send. - * @data1: size of packet data - */ -static void exynos_mipi_dsi_long_data_wr(struct mipi_dsim_device *dsim, - const unsigned char *data0, unsigned int data_size) -{ - unsigned int data_cnt = 0, payload = 0; - - /* in case that data count is more then 4 */ - for (data_cnt = 0; data_cnt < data_size; data_cnt += 4) { - /* - * after sending 4bytes per one time, - * send remainder data less then 4. - */ - if ((data_size - data_cnt) < 4) { - if ((data_size - data_cnt) == 3) { - payload = data0[data_cnt] | - data0[data_cnt + 1] << 8 | - data0[data_cnt + 2] << 16; - dev_dbg(dsim->dev, "count = 3 payload = %x, %x %x %x\n", - payload, data0[data_cnt], - data0[data_cnt + 1], - data0[data_cnt + 2]); - } else if ((data_size - data_cnt) == 2) { - payload = data0[data_cnt] | - data0[data_cnt + 1] << 8; - dev_dbg(dsim->dev, - "count = 2 payload = %x, %x %x\n", payload, - data0[data_cnt], - data0[data_cnt + 1]); - } else if ((data_size - data_cnt) == 1) { - payload = data0[data_cnt]; - } - - exynos_mipi_dsi_wr_tx_data(dsim, payload); - /* send 4bytes per one time. */ - } else { - payload = data0[data_cnt] | - data0[data_cnt + 1] << 8 | - data0[data_cnt + 2] << 16 | - data0[data_cnt + 3] << 24; - - dev_dbg(dsim->dev, - "count = 4 payload = %x, %x %x %x %x\n", - payload, *(u8 *)(data0 + data_cnt), - data0[data_cnt + 1], - data0[data_cnt + 2], - data0[data_cnt + 3]); - - exynos_mipi_dsi_wr_tx_data(dsim, payload); - } - } -} - -int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, - const unsigned char *data0, unsigned int data_size) -{ - unsigned int check_rx_ack = 0; - - if (dsim->state == DSIM_STATE_ULPS) { - dev_err(dsim->dev, "state is ULPS.\n"); - - return -EINVAL; - } - - /* FIXME!!! why does it need this delay? */ - msleep(20); - - mutex_lock(&dsim->lock); - - switch (data_id) { - /* short packet types of packet types for command. */ - case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM: - case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM: - case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM: - case MIPI_DSI_DCS_SHORT_WRITE: - case MIPI_DSI_DCS_SHORT_WRITE_PARAM: - case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE: - exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); - if (check_rx_ack) { - /* process response func should be implemented */ - mutex_unlock(&dsim->lock); - return 0; - } else { - mutex_unlock(&dsim->lock); - return -EINVAL; - } - - /* general command */ - case MIPI_DSI_COLOR_MODE_OFF: - case MIPI_DSI_COLOR_MODE_ON: - case MIPI_DSI_SHUTDOWN_PERIPHERAL: - case MIPI_DSI_TURN_ON_PERIPHERAL: - exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); - if (check_rx_ack) { - /* process response func should be implemented. */ - mutex_unlock(&dsim->lock); - return 0; - } else { - mutex_unlock(&dsim->lock); - return -EINVAL; - } - - /* packet types for video data */ - case MIPI_DSI_V_SYNC_START: - case MIPI_DSI_V_SYNC_END: - case MIPI_DSI_H_SYNC_START: - case MIPI_DSI_H_SYNC_END: - case MIPI_DSI_END_OF_TRANSMISSION: - mutex_unlock(&dsim->lock); - return 0; - - /* long packet type and null packet */ - case MIPI_DSI_NULL_PACKET: - case MIPI_DSI_BLANKING_PACKET: - mutex_unlock(&dsim->lock); - return 0; - case MIPI_DSI_GENERIC_LONG_WRITE: - case MIPI_DSI_DCS_LONG_WRITE: - { - unsigned int size, payload = 0; - reinit_completion(&dsim_wr_comp); - - size = data_size * 4; - - /* if data count is less then 4, then send 3bytes data. */ - if (data_size < 4) { - payload = data0[0] | - data0[1] << 8 | - data0[2] << 16; - - exynos_mipi_dsi_wr_tx_data(dsim, payload); - - dev_dbg(dsim->dev, "count = %d payload = %x,%x %x %x\n", - data_size, payload, data0[0], - data0[1], data0[2]); - - /* in case that data count is more then 4 */ - } else - exynos_mipi_dsi_long_data_wr(dsim, data0, data_size); - - /* put data into header fifo */ - exynos_mipi_dsi_wr_tx_header(dsim, data_id, data_size & 0xff, - (data_size & 0xff00) >> 8); - - if (!wait_for_completion_interruptible_timeout(&dsim_wr_comp, - MIPI_FIFO_TIMEOUT)) { - dev_warn(dsim->dev, "command write timeout.\n"); - mutex_unlock(&dsim->lock); - return -EAGAIN; - } - - if (check_rx_ack) { - /* process response func should be implemented. */ - mutex_unlock(&dsim->lock); - return 0; - } else { - mutex_unlock(&dsim->lock); - return -EINVAL; - } - } - - /* packet typo for video data */ - case MIPI_DSI_PACKED_PIXEL_STREAM_16: - case MIPI_DSI_PACKED_PIXEL_STREAM_18: - case MIPI_DSI_PIXEL_STREAM_3BYTE_18: - case MIPI_DSI_PACKED_PIXEL_STREAM_24: - if (check_rx_ack) { - /* process response func should be implemented. */ - mutex_unlock(&dsim->lock); - return 0; - } else { - mutex_unlock(&dsim->lock); - return -EINVAL; - } - default: - dev_warn(dsim->dev, - "data id %x is not supported current DSI spec.\n", - data_id); - - mutex_unlock(&dsim->lock); - return -EINVAL; - } -} - -static unsigned int exynos_mipi_dsi_long_data_rd(struct mipi_dsim_device *dsim, - unsigned int req_size, unsigned int rx_data, u8 *rx_buf) -{ - unsigned int rcv_pkt, i, j; - u16 rxsize; - - /* for long packet */ - rxsize = (u16)((rx_data & 0x00ffff00) >> 8); - dev_dbg(dsim->dev, "mipi dsi rx size : %d\n", rxsize); - if (rxsize != req_size) { - dev_dbg(dsim->dev, - "received size mismatch received: %d, requested: %d\n", - rxsize, req_size); - goto err; - } - - for (i = 0; i < (rxsize >> 2); i++) { - rcv_pkt = exynos_mipi_dsi_rd_rx_fifo(dsim); - dev_dbg(dsim->dev, "received pkt : %08x\n", rcv_pkt); - for (j = 0; j < 4; j++) { - rx_buf[(i * 4) + j] = - (u8)(rcv_pkt >> (j * 8)) & 0xff; - dev_dbg(dsim->dev, "received value : %02x\n", - (rcv_pkt >> (j * 8)) & 0xff); - } - } - if (rxsize % 4) { - rcv_pkt = exynos_mipi_dsi_rd_rx_fifo(dsim); - dev_dbg(dsim->dev, "received pkt : %08x\n", rcv_pkt); - for (j = 0; j < (rxsize % 4); j++) { - rx_buf[(i * 4) + j] = - (u8)(rcv_pkt >> (j * 8)) & 0xff; - dev_dbg(dsim->dev, "received value : %02x\n", - (rcv_pkt >> (j * 8)) & 0xff); - } - } - - return rxsize; - -err: - return -EINVAL; -} - -static unsigned int exynos_mipi_dsi_response_size(unsigned int req_size) -{ - switch (req_size) { - case 1: - return MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE; - case 2: - return MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE; - default: - return MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE; - } -} - -int exynos_mipi_dsi_rd_data(struct mipi_dsim_device *dsim, unsigned int data_id, - unsigned int data0, unsigned int req_size, u8 *rx_buf) -{ - unsigned int rx_data, rcv_pkt, i; - u8 response = 0; - u16 rxsize; - - if (dsim->state == DSIM_STATE_ULPS) { - dev_err(dsim->dev, "state is ULPS.\n"); - - return -EINVAL; - } - - /* FIXME!!! */ - msleep(20); - - mutex_lock(&dsim->lock); - reinit_completion(&dsim_rd_comp); - exynos_mipi_dsi_rd_tx_header(dsim, - MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE, req_size); - - response = exynos_mipi_dsi_response_size(req_size); - - switch (data_id) { - case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM: - case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM: - case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM: - case MIPI_DSI_DCS_READ: - exynos_mipi_dsi_rd_tx_header(dsim, - data_id, data0); - /* process response func should be implemented. */ - break; - default: - dev_warn(dsim->dev, - "data id %x is not supported current DSI spec.\n", - data_id); - - mutex_unlock(&dsim->lock); - return -EINVAL; - } - - if (!wait_for_completion_interruptible_timeout(&dsim_rd_comp, - MIPI_FIFO_TIMEOUT)) { - pr_err("RX done interrupt timeout\n"); - mutex_unlock(&dsim->lock); - return 0; - } - - msleep(20); - - rx_data = exynos_mipi_dsi_rd_rx_fifo(dsim); - - if ((u8)(rx_data & 0xff) != response) { - printk(KERN_ERR - "mipi dsi wrong response rx_data : %x, response:%x\n", - rx_data, response); - goto clear_rx_fifo; - } - - if (req_size <= 2) { - /* for short packet */ - for (i = 0; i < req_size; i++) - rx_buf[i] = (rx_data >> (8 + (i * 8))) & 0xff; - rxsize = req_size; - } else { - /* for long packet */ - rxsize = exynos_mipi_dsi_long_data_rd(dsim, req_size, rx_data, - rx_buf); - if (rxsize != req_size) - goto clear_rx_fifo; - } - - rcv_pkt = exynos_mipi_dsi_rd_rx_fifo(dsim); - - msleep(20); - - if (rcv_pkt != MIPI_RX_FIFO_READ_DONE) { - dev_info(dsim->dev, - "Can't found RX FIFO READ DONE FLAG : %x\n", rcv_pkt); - goto clear_rx_fifo; - } - - mutex_unlock(&dsim->lock); - - return rxsize; - -clear_rx_fifo: - i = 0; - while (1) { - rcv_pkt = exynos_mipi_dsi_rd_rx_fifo(dsim); - if ((rcv_pkt == MIPI_RX_FIFO_READ_DONE) - || (i > MIPI_MAX_RX_FIFO)) - break; - dev_dbg(dsim->dev, - "mipi dsi clear rx fifo : %08x\n", rcv_pkt); - i++; - } - dev_info(dsim->dev, - "mipi dsi rx done count : %d, rcv_pkt : %08x\n", i, rcv_pkt); - - mutex_unlock(&dsim->lock); - - return 0; -} - -static int exynos_mipi_dsi_pll_on(struct mipi_dsim_device *dsim, - unsigned int enable) -{ - int sw_timeout; - - if (enable) { - sw_timeout = 1000; - - exynos_mipi_dsi_enable_pll(dsim, 1); - while (1) { - sw_timeout--; - if (exynos_mipi_dsi_is_pll_stable(dsim)) - return 0; - if (sw_timeout == 0) - return -EINVAL; - } - } else - exynos_mipi_dsi_enable_pll(dsim, 0); - - return 0; -} - -static unsigned long exynos_mipi_dsi_change_pll(struct mipi_dsim_device *dsim, - unsigned int pre_divider, unsigned int main_divider, - unsigned int scaler) -{ - unsigned long dfin_pll, dfvco, dpll_out; - unsigned int i, freq_band = 0xf; - - dfin_pll = (FIN_HZ / pre_divider); - - /****************************************************** - * Serial Clock(=ByteClk X 8) FreqBand[3:0] * - ****************************************************** - * ~ 99.99 MHz 0000 - * 100 ~ 119.99 MHz 0001 - * 120 ~ 159.99 MHz 0010 - * 160 ~ 199.99 MHz 0011 - * 200 ~ 239.99 MHz 0100 - * 140 ~ 319.99 MHz 0101 - * 320 ~ 389.99 MHz 0110 - * 390 ~ 449.99 MHz 0111 - * 450 ~ 509.99 MHz 1000 - * 510 ~ 559.99 MHz 1001 - * 560 ~ 639.99 MHz 1010 - * 640 ~ 689.99 MHz 1011 - * 690 ~ 769.99 MHz 1100 - * 770 ~ 869.99 MHz 1101 - * 870 ~ 949.99 MHz 1110 - * 950 ~ 1000 MHz 1111 - ******************************************************/ - if (dfin_pll < DFIN_PLL_MIN_HZ || dfin_pll > DFIN_PLL_MAX_HZ) { - dev_warn(dsim->dev, "fin_pll range should be 6MHz ~ 12MHz\n"); - exynos_mipi_dsi_enable_afc(dsim, 0, 0); - } else { - if (dfin_pll < 7 * MHZ) - exynos_mipi_dsi_enable_afc(dsim, 1, 0x1); - else if (dfin_pll < 8 * MHZ) - exynos_mipi_dsi_enable_afc(dsim, 1, 0x0); - else if (dfin_pll < 9 * MHZ) - exynos_mipi_dsi_enable_afc(dsim, 1, 0x3); - else if (dfin_pll < 10 * MHZ) - exynos_mipi_dsi_enable_afc(dsim, 1, 0x2); - else if (dfin_pll < 11 * MHZ) - exynos_mipi_dsi_enable_afc(dsim, 1, 0x5); - else - exynos_mipi_dsi_enable_afc(dsim, 1, 0x4); - } - - dfvco = dfin_pll * main_divider; - dev_dbg(dsim->dev, "dfvco = %lu, dfin_pll = %lu, main_divider = %d\n", - dfvco, dfin_pll, main_divider); - if (dfvco < DFVCO_MIN_HZ || dfvco > DFVCO_MAX_HZ) - dev_warn(dsim->dev, "fvco range should be 500MHz ~ 1000MHz\n"); - - dpll_out = dfvco / (1 << scaler); - dev_dbg(dsim->dev, "dpll_out = %lu, dfvco = %lu, scaler = %d\n", - dpll_out, dfvco, scaler); - - for (i = 0; i < ARRAY_SIZE(dpll_table); i++) { - if (dpll_out < dpll_table[i] * MHZ) { - freq_band = i; - break; - } - } - - dev_dbg(dsim->dev, "freq_band = %d\n", freq_band); - - exynos_mipi_dsi_pll_freq(dsim, pre_divider, main_divider, scaler); - - exynos_mipi_dsi_hs_zero_ctrl(dsim, 0); - exynos_mipi_dsi_prep_ctrl(dsim, 0); - - /* Freq Band */ - exynos_mipi_dsi_pll_freq_band(dsim, freq_band); - - /* Stable time */ - exynos_mipi_dsi_pll_stable_time(dsim, dsim->dsim_config->pll_stable_time); - - /* Enable PLL */ - dev_dbg(dsim->dev, "FOUT of mipi dphy pll is %luMHz\n", - (dpll_out / MHZ)); - - return dpll_out; -} - -static int exynos_mipi_dsi_set_clock(struct mipi_dsim_device *dsim, - unsigned int byte_clk_sel, unsigned int enable) -{ - unsigned int esc_div; - unsigned long esc_clk_error_rate; - unsigned long hs_clk = 0, byte_clk = 0, escape_clk = 0; - - if (enable) { - dsim->e_clk_src = byte_clk_sel; - - /* Escape mode clock and byte clock source */ - exynos_mipi_dsi_set_byte_clock_src(dsim, byte_clk_sel); - - /* DPHY, DSIM Link : D-PHY clock out */ - if (byte_clk_sel == DSIM_PLL_OUT_DIV8) { - hs_clk = exynos_mipi_dsi_change_pll(dsim, - dsim->dsim_config->p, dsim->dsim_config->m, - dsim->dsim_config->s); - if (hs_clk == 0) { - dev_err(dsim->dev, - "failed to get hs clock.\n"); - return -EINVAL; - } - - byte_clk = hs_clk / 8; - exynos_mipi_dsi_enable_pll_bypass(dsim, 0); - exynos_mipi_dsi_pll_on(dsim, 1); - /* DPHY : D-PHY clock out, DSIM link : external clock out */ - } else if (byte_clk_sel == DSIM_EXT_CLK_DIV8) { - dev_warn(dsim->dev, "this project is not support\n"); - dev_warn(dsim->dev, - "external clock source for MIPI DSIM.\n"); - } else if (byte_clk_sel == DSIM_EXT_CLK_BYPASS) { - dev_warn(dsim->dev, "this project is not support\n"); - dev_warn(dsim->dev, - "external clock source for MIPI DSIM\n"); - } - - /* escape clock divider */ - esc_div = byte_clk / (dsim->dsim_config->esc_clk); - dev_dbg(dsim->dev, - "esc_div = %d, byte_clk = %lu, esc_clk = %lu\n", - esc_div, byte_clk, dsim->dsim_config->esc_clk); - if ((byte_clk / esc_div) >= (20 * MHZ) || - (byte_clk / esc_div) > - dsim->dsim_config->esc_clk) - esc_div += 1; - - escape_clk = byte_clk / esc_div; - dev_dbg(dsim->dev, - "escape_clk = %lu, byte_clk = %lu, esc_div = %d\n", - escape_clk, byte_clk, esc_div); - - /* enable escape clock. */ - exynos_mipi_dsi_enable_byte_clock(dsim, 1); - - /* enable byte clk and escape clock */ - exynos_mipi_dsi_set_esc_clk_prs(dsim, 1, esc_div); - /* escape clock on lane */ - exynos_mipi_dsi_enable_esc_clk_on_lane(dsim, - (DSIM_LANE_CLOCK | dsim->data_lane), 1); - - dev_dbg(dsim->dev, "byte clock is %luMHz\n", - (byte_clk / MHZ)); - dev_dbg(dsim->dev, "escape clock that user's need is %lu\n", - (dsim->dsim_config->esc_clk / MHZ)); - dev_dbg(dsim->dev, "escape clock divider is %x\n", esc_div); - dev_dbg(dsim->dev, "escape clock is %luMHz\n", - ((byte_clk / esc_div) / MHZ)); - - if ((byte_clk / esc_div) > escape_clk) { - esc_clk_error_rate = escape_clk / - (byte_clk / esc_div); - dev_warn(dsim->dev, "error rate is %lu over.\n", - (esc_clk_error_rate / 100)); - } else if ((byte_clk / esc_div) < (escape_clk)) { - esc_clk_error_rate = (byte_clk / esc_div) / - escape_clk; - dev_warn(dsim->dev, "error rate is %lu under.\n", - (esc_clk_error_rate / 100)); - } - } else { - exynos_mipi_dsi_enable_esc_clk_on_lane(dsim, - (DSIM_LANE_CLOCK | dsim->data_lane), 0); - exynos_mipi_dsi_set_esc_clk_prs(dsim, 0, 0); - - /* disable escape clock. */ - exynos_mipi_dsi_enable_byte_clock(dsim, 0); - - if (byte_clk_sel == DSIM_PLL_OUT_DIV8) - exynos_mipi_dsi_pll_on(dsim, 0); - } - - return 0; -} - -int exynos_mipi_dsi_init_dsim(struct mipi_dsim_device *dsim) -{ - dsim->state = DSIM_STATE_INIT; - - switch (dsim->dsim_config->e_no_data_lane) { - case DSIM_DATA_LANE_1: - dsim->data_lane = DSIM_LANE_DATA0; - break; - case DSIM_DATA_LANE_2: - dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1; - break; - case DSIM_DATA_LANE_3: - dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1 | - DSIM_LANE_DATA2; - break; - case DSIM_DATA_LANE_4: - dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1 | - DSIM_LANE_DATA2 | DSIM_LANE_DATA3; - break; - default: - dev_info(dsim->dev, "data lane is invalid.\n"); - return -EINVAL; - } - - exynos_mipi_dsi_sw_reset(dsim); - exynos_mipi_dsi_func_reset(dsim); - - exynos_mipi_dsi_dp_dn_swap(dsim, 0); - - return 0; -} - -void exynos_mipi_dsi_init_interrupt(struct mipi_dsim_device *dsim) -{ - unsigned int src = 0; - - src = (INTSRC_SFR_FIFO_EMPTY | INTSRC_RX_DATA_DONE); - exynos_mipi_dsi_set_interrupt(dsim, src, 1); - - src = 0; - src = ~(INTMSK_RX_DONE | INTMSK_FIFO_EMPTY); - exynos_mipi_dsi_set_interrupt_mask(dsim, src, 1); -} - -int exynos_mipi_dsi_enable_frame_done_int(struct mipi_dsim_device *dsim, - unsigned int enable) -{ - /* enable only frame done interrupt */ - exynos_mipi_dsi_set_interrupt_mask(dsim, INTMSK_FRAME_DONE, enable); - - return 0; -} - -void exynos_mipi_dsi_stand_by(struct mipi_dsim_device *dsim, - unsigned int enable) -{ - - /* consider Main display and Sub display. */ - - exynos_mipi_dsi_set_main_stand_by(dsim, enable); -} - -int exynos_mipi_dsi_set_display_mode(struct mipi_dsim_device *dsim, - struct mipi_dsim_config *dsim_config) -{ - struct mipi_dsim_platform_data *dsim_pd; - struct fb_videomode *timing; - - dsim_pd = (struct mipi_dsim_platform_data *)dsim->pd; - timing = (struct fb_videomode *)dsim_pd->lcd_panel_info; - - /* in case of VIDEO MODE (RGB INTERFACE), it sets polarities. */ - if (dsim_config->e_interface == (u32) DSIM_VIDEO) { - if (dsim_config->auto_vertical_cnt == 0) { - exynos_mipi_dsi_set_main_disp_vporch(dsim, - dsim_config->cmd_allow, - timing->lower_margin, - timing->upper_margin); - exynos_mipi_dsi_set_main_disp_hporch(dsim, - timing->right_margin, - timing->left_margin); - exynos_mipi_dsi_set_main_disp_sync_area(dsim, - timing->vsync_len, - timing->hsync_len); - } - } - - exynos_mipi_dsi_set_main_disp_resol(dsim, timing->xres, - timing->yres); - - exynos_mipi_dsi_display_config(dsim, dsim_config); - - dev_info(dsim->dev, "lcd panel ==> width = %d, height = %d\n", - timing->xres, timing->yres); - - return 0; -} - -int exynos_mipi_dsi_init_link(struct mipi_dsim_device *dsim) -{ - unsigned int time_out = 100; - - switch (dsim->state) { - case DSIM_STATE_INIT: - exynos_mipi_dsi_init_fifo_pointer(dsim, 0x1f); - - /* dsi configuration */ - exynos_mipi_dsi_init_config(dsim); - exynos_mipi_dsi_enable_lane(dsim, DSIM_LANE_CLOCK, 1); - exynos_mipi_dsi_enable_lane(dsim, dsim->data_lane, 1); - - /* set clock configuration */ - exynos_mipi_dsi_set_clock(dsim, dsim->dsim_config->e_byte_clk, 1); - - /* check clock and data lane state are stop state */ - while (!(exynos_mipi_dsi_is_lane_state(dsim))) { - time_out--; - if (time_out == 0) { - dev_err(dsim->dev, - "DSI Master is not stop state.\n"); - dev_err(dsim->dev, - "Check initialization process\n"); - - return -EINVAL; - } - } - if (time_out != 0) { - dev_info(dsim->dev, - "DSI Master driver has been completed.\n"); - dev_info(dsim->dev, "DSI Master state is stop state\n"); - } - - dsim->state = DSIM_STATE_STOP; - - /* BTA sequence counters */ - exynos_mipi_dsi_set_stop_state_counter(dsim, - dsim->dsim_config->stop_holding_cnt); - exynos_mipi_dsi_set_bta_timeout(dsim, - dsim->dsim_config->bta_timeout); - exynos_mipi_dsi_set_lpdr_timeout(dsim, - dsim->dsim_config->rx_timeout); - - return 0; - default: - dev_info(dsim->dev, "DSI Master is already init.\n"); - return 0; - } - - return 0; -} - -int exynos_mipi_dsi_set_hs_enable(struct mipi_dsim_device *dsim) -{ - if (dsim->state != DSIM_STATE_STOP) { - dev_warn(dsim->dev, "DSIM is not in stop state.\n"); - return 0; - } - - if (dsim->e_clk_src == DSIM_EXT_CLK_BYPASS) { - dev_warn(dsim->dev, "clock source is external bypass.\n"); - return 0; - } - - dsim->state = DSIM_STATE_HSCLKEN; - - /* set LCDC and CPU transfer mode to HS. */ - exynos_mipi_dsi_set_lcdc_transfer_mode(dsim, 0); - exynos_mipi_dsi_set_cpu_transfer_mode(dsim, 0); - exynos_mipi_dsi_enable_hs_clock(dsim, 1); - - return 0; -} - -int exynos_mipi_dsi_set_data_transfer_mode(struct mipi_dsim_device *dsim, - unsigned int mode) -{ - if (mode) { - if (dsim->state != DSIM_STATE_HSCLKEN) { - dev_err(dsim->dev, "HS Clock lane is not enabled.\n"); - return -EINVAL; - } - - exynos_mipi_dsi_set_lcdc_transfer_mode(dsim, 0); - } else { - if (dsim->state == DSIM_STATE_INIT || dsim->state == - DSIM_STATE_ULPS) { - dev_err(dsim->dev, - "DSI Master is not STOP or HSDT state.\n"); - return -EINVAL; - } - - exynos_mipi_dsi_set_cpu_transfer_mode(dsim, 0); - } - - return 0; -} - -int exynos_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim) -{ - return _exynos_mipi_dsi_get_frame_done_status(dsim); -} - -int exynos_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim) -{ - _exynos_mipi_dsi_clear_frame_done(dsim); - - return 0; -} - -int exynos_mipi_dsi_fifo_clear(struct mipi_dsim_device *dsim, - unsigned int val) -{ - int try = TRY_FIFO_CLEAR; - - exynos_mipi_dsi_sw_reset_release(dsim); - exynos_mipi_dsi_func_reset(dsim); - - do { - if (exynos_mipi_dsi_get_sw_reset_release(dsim)) { - exynos_mipi_dsi_init_interrupt(dsim); - dev_dbg(dsim->dev, "reset release done.\n"); - return 0; - } - } while (--try); - - dev_err(dsim->dev, "failed to clear dsim fifo.\n"); - return -EAGAIN; -} - -MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>"); -MODULE_DESCRIPTION("Samsung SoC MIPI-DSI common driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.h b/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.h deleted file mode 100644 index 412552274df3..000000000000 --- a/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.h +++ /dev/null @@ -1,46 +0,0 @@ -/* linux/drivers/video/exynos_mipi_dsi_common.h - * - * Header file for Samsung SoC MIPI-DSI common driver. - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd - * - * InKi Dae <inki.dae@samsung.com> - * Donghwa Lee <dh09.lee@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef _EXYNOS_MIPI_DSI_COMMON_H -#define _EXYNOS_MIPI_DSI_COMMON_H - -static DECLARE_COMPLETION(dsim_rd_comp); -static DECLARE_COMPLETION(dsim_wr_comp); - -int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, - const unsigned char *data0, unsigned int data_size); -int exynos_mipi_dsi_rd_data(struct mipi_dsim_device *dsim, unsigned int data_id, - unsigned int data0, unsigned int req_size, u8 *rx_buf); -irqreturn_t exynos_mipi_dsi_interrupt_handler(int irq, void *dev_id); -void exynos_mipi_dsi_init_interrupt(struct mipi_dsim_device *dsim); -int exynos_mipi_dsi_init_dsim(struct mipi_dsim_device *dsim); -void exynos_mipi_dsi_stand_by(struct mipi_dsim_device *dsim, - unsigned int enable); -int exynos_mipi_dsi_set_display_mode(struct mipi_dsim_device *dsim, - struct mipi_dsim_config *dsim_info); -int exynos_mipi_dsi_init_link(struct mipi_dsim_device *dsim); -int exynos_mipi_dsi_set_hs_enable(struct mipi_dsim_device *dsim); -int exynos_mipi_dsi_set_data_transfer_mode(struct mipi_dsim_device *dsim, - unsigned int mode); -int exynos_mipi_dsi_enable_frame_done_int(struct mipi_dsim_device *dsim, - unsigned int enable); -int exynos_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim); -int exynos_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim); - -extern struct fb_info *registered_fb[FB_MAX] __read_mostly; - -int exynos_mipi_dsi_fifo_clear(struct mipi_dsim_device *dsim, - unsigned int val); - -#endif /* _EXYNOS_MIPI_DSI_COMMON_H */ diff --git a/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.c b/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.c deleted file mode 100644 index c148d06540c1..000000000000 --- a/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.c +++ /dev/null @@ -1,618 +0,0 @@ -/* linux/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c - * - * Samsung SoC MIPI-DSI lowlevel driver. - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd - * - * InKi Dae, <inki.dae@samsung.com> - * Donghwa Lee, <dh09.lee@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/mutex.h> -#include <linux/wait.h> -#include <linux/delay.h> -#include <linux/fs.h> -#include <linux/mm.h> -#include <linux/ctype.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <video/exynos_mipi_dsim.h> - -#include "exynos_mipi_dsi_regs.h" -#include "exynos_mipi_dsi_lowlevel.h" - -void exynos_mipi_dsi_func_reset(struct mipi_dsim_device *dsim) -{ - unsigned int reg; - - reg = readl(dsim->reg_base + EXYNOS_DSIM_SWRST); - - reg |= DSIM_FUNCRST; - - writel(reg, dsim->reg_base + EXYNOS_DSIM_SWRST); -} - -void exynos_mipi_dsi_sw_reset(struct mipi_dsim_device *dsim) -{ - unsigned int reg; - - reg = readl(dsim->reg_base + EXYNOS_DSIM_SWRST); - - reg |= DSIM_SWRST; - - writel(reg, dsim->reg_base + EXYNOS_DSIM_SWRST); -} - -void exynos_mipi_dsi_sw_reset_release(struct mipi_dsim_device *dsim) -{ - unsigned int reg; - - reg = readl(dsim->reg_base + EXYNOS_DSIM_INTSRC); - - reg |= INTSRC_SW_RST_RELEASE; - - writel(reg, dsim->reg_base + EXYNOS_DSIM_INTSRC); -} - -int exynos_mipi_dsi_get_sw_reset_release(struct mipi_dsim_device *dsim) -{ - return (readl(dsim->reg_base + EXYNOS_DSIM_INTSRC)) & - INTSRC_SW_RST_RELEASE; -} - -unsigned int exynos_mipi_dsi_read_interrupt_mask(struct mipi_dsim_device *dsim) -{ - unsigned int reg; - - reg = readl(dsim->reg_base + EXYNOS_DSIM_INTMSK); - - return reg; -} - -void exynos_mipi_dsi_set_interrupt_mask(struct mipi_dsim_device *dsim, - unsigned int mode, unsigned int mask) -{ - unsigned int reg = 0; - - if (mask) - reg |= mode; - else - reg &= ~mode; - - writel(reg, dsim->reg_base + EXYNOS_DSIM_INTMSK); -} - -void exynos_mipi_dsi_init_fifo_pointer(struct mipi_dsim_device *dsim, - unsigned int cfg) -{ - unsigned int reg; - - reg = readl(dsim->reg_base + EXYNOS_DSIM_FIFOCTRL); - - writel(reg & ~(cfg), dsim->reg_base + EXYNOS_DSIM_FIFOCTRL); - mdelay(10); - reg |= cfg; - - writel(reg, dsim->reg_base + EXYNOS_DSIM_FIFOCTRL); -} - -/* - * this function set PLL P, M and S value in D-PHY - */ -void exynos_mipi_dsi_set_phy_tunning(struct mipi_dsim_device *dsim, - unsigned int value) -{ - writel(DSIM_AFC_CTL(value), dsim->reg_base + EXYNOS_DSIM_PHYACCHR); -} - -void exynos_mipi_dsi_set_main_stand_by(struct mipi_dsim_device *dsim, - unsigned int enable) -{ - unsigned int reg; - - reg = readl(dsim->reg_base + EXYNOS_DSIM_MDRESOL); - - reg &= ~DSIM_MAIN_STAND_BY; - - if (enable) - reg |= DSIM_MAIN_STAND_BY; - - writel(reg, dsim->reg_base + EXYNOS_DSIM_MDRESOL); -} - -void exynos_mipi_dsi_set_main_disp_resol(struct mipi_dsim_device *dsim, - unsigned int width_resol, unsigned int height_resol) -{ - unsigned int reg; - - /* standby should be set after configuration so set to not ready*/ - reg = (readl(dsim->reg_base + EXYNOS_DSIM_MDRESOL)) & - ~(DSIM_MAIN_STAND_BY); - writel(reg, dsim->reg_base + EXYNOS_DSIM_MDRESOL); - - reg &= ~((0x7ff << 16) | (0x7ff << 0)); - reg |= DSIM_MAIN_VRESOL(height_resol) | DSIM_MAIN_HRESOL(width_resol); - - reg |= DSIM_MAIN_STAND_BY; - writel(reg, dsim->reg_base + EXYNOS_DSIM_MDRESOL); -} - -void exynos_mipi_dsi_set_main_disp_vporch(struct mipi_dsim_device *dsim, - unsigned int cmd_allow, unsigned int vfront, unsigned int vback) -{ - unsigned int reg; - - reg = (readl(dsim->reg_base + EXYNOS_DSIM_MVPORCH)) & - ~((DSIM_CMD_ALLOW_MASK) | (DSIM_STABLE_VFP_MASK) | - (DSIM_MAIN_VBP_MASK)); - - reg |= (DSIM_CMD_ALLOW_SHIFT(cmd_allow & 0xf) | - DSIM_STABLE_VFP_SHIFT(vfront & 0x7ff) | - DSIM_MAIN_VBP_SHIFT(vback & 0x7ff)); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_MVPORCH); -} - -void exynos_mipi_dsi_set_main_disp_hporch(struct mipi_dsim_device *dsim, - unsigned int front, unsigned int back) -{ - unsigned int reg; - - reg = (readl(dsim->reg_base + EXYNOS_DSIM_MHPORCH)) & - ~((DSIM_MAIN_HFP_MASK) | (DSIM_MAIN_HBP_MASK)); - - reg |= DSIM_MAIN_HFP_SHIFT(front) | DSIM_MAIN_HBP_SHIFT(back); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_MHPORCH); -} - -void exynos_mipi_dsi_set_main_disp_sync_area(struct mipi_dsim_device *dsim, - unsigned int vert, unsigned int hori) -{ - unsigned int reg; - - reg = (readl(dsim->reg_base + EXYNOS_DSIM_MSYNC)) & - ~((DSIM_MAIN_VSA_MASK) | (DSIM_MAIN_HSA_MASK)); - - reg |= (DSIM_MAIN_VSA_SHIFT(vert & 0x3ff) | - DSIM_MAIN_HSA_SHIFT(hori)); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_MSYNC); -} - -void exynos_mipi_dsi_set_sub_disp_resol(struct mipi_dsim_device *dsim, - unsigned int vert, unsigned int hori) -{ - unsigned int reg; - - reg = (readl(dsim->reg_base + EXYNOS_DSIM_SDRESOL)) & - ~(DSIM_SUB_STANDY_MASK); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_SDRESOL); - - reg &= ~(DSIM_SUB_VRESOL_MASK) | ~(DSIM_SUB_HRESOL_MASK); - reg |= (DSIM_SUB_VRESOL_SHIFT(vert & 0x7ff) | - DSIM_SUB_HRESOL_SHIFT(hori & 0x7ff)); - writel(reg, dsim->reg_base + EXYNOS_DSIM_SDRESOL); - - reg |= DSIM_SUB_STANDY_SHIFT(1); - writel(reg, dsim->reg_base + EXYNOS_DSIM_SDRESOL); -} - -void exynos_mipi_dsi_init_config(struct mipi_dsim_device *dsim) -{ - struct mipi_dsim_config *dsim_config = dsim->dsim_config; - - unsigned int cfg = (readl(dsim->reg_base + EXYNOS_DSIM_CONFIG)) & - ~((1 << 28) | (0x1f << 20) | (0x3 << 5)); - - cfg = ((DSIM_AUTO_FLUSH(dsim_config->auto_flush)) | - (DSIM_EOT_DISABLE(dsim_config->eot_disable)) | - (DSIM_AUTO_MODE_SHIFT(dsim_config->auto_vertical_cnt)) | - (DSIM_HSE_MODE_SHIFT(dsim_config->hse)) | - (DSIM_HFP_MODE_SHIFT(dsim_config->hfp)) | - (DSIM_HBP_MODE_SHIFT(dsim_config->hbp)) | - (DSIM_HSA_MODE_SHIFT(dsim_config->hsa)) | - (DSIM_NUM_OF_DATALANE_SHIFT(dsim_config->e_no_data_lane))); - - writel(cfg, dsim->reg_base + EXYNOS_DSIM_CONFIG); -} - -void exynos_mipi_dsi_display_config(struct mipi_dsim_device *dsim, - struct mipi_dsim_config *dsim_config) -{ - u32 reg = (readl(dsim->reg_base + EXYNOS_DSIM_CONFIG)) & - ~((0x3 << 26) | (1 << 25) | (0x3 << 18) | (0x7 << 12) | - (0x3 << 16) | (0x7 << 8)); - - if (dsim_config->e_interface == DSIM_VIDEO) - reg |= (1 << 25); - else if (dsim_config->e_interface == DSIM_COMMAND) - reg &= ~(1 << 25); - else { - dev_err(dsim->dev, "unknown lcd type.\n"); - return; - } - - /* main lcd */ - reg |= ((u8) (dsim_config->e_burst_mode) & 0x3) << 26 | - ((u8) (dsim_config->e_virtual_ch) & 0x3) << 18 | - ((u8) (dsim_config->e_pixel_format) & 0x7) << 12; - - writel(reg, dsim->reg_base + EXYNOS_DSIM_CONFIG); -} - -void exynos_mipi_dsi_enable_lane(struct mipi_dsim_device *dsim, unsigned int lane, - unsigned int enable) -{ - unsigned int reg; - - reg = readl(dsim->reg_base + EXYNOS_DSIM_CONFIG); - - if (enable) - reg |= DSIM_LANE_ENx(lane); - else - reg &= ~DSIM_LANE_ENx(lane); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_CONFIG); -} - - -void exynos_mipi_dsi_set_data_lane_number(struct mipi_dsim_device *dsim, - unsigned int count) -{ - unsigned int cfg; - - /* get the data lane number. */ - cfg = DSIM_NUM_OF_DATALANE_SHIFT(count); - - writel(cfg, dsim->reg_base + EXYNOS_DSIM_CONFIG); -} - -void exynos_mipi_dsi_enable_afc(struct mipi_dsim_device *dsim, unsigned int enable, - unsigned int afc_code) -{ - unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_PHYACCHR); - - if (enable) { - reg |= (1 << 14); - reg &= ~(0x7 << 5); - reg |= (afc_code & 0x7) << 5; - } else - reg &= ~(1 << 14); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_PHYACCHR); -} - -void exynos_mipi_dsi_enable_pll_bypass(struct mipi_dsim_device *dsim, - unsigned int enable) -{ - unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_CLKCTRL)) & - ~(DSIM_PLL_BYPASS_SHIFT(0x1)); - - reg |= DSIM_PLL_BYPASS_SHIFT(enable); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_CLKCTRL); -} - -void exynos_mipi_dsi_set_pll_pms(struct mipi_dsim_device *dsim, unsigned int p, - unsigned int m, unsigned int s) -{ - unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_PLLCTRL); - - reg |= ((p & 0x3f) << 13) | ((m & 0x1ff) << 4) | ((s & 0x7) << 1); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_PLLCTRL); -} - -void exynos_mipi_dsi_pll_freq_band(struct mipi_dsim_device *dsim, - unsigned int freq_band) -{ - unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_PLLCTRL)) & - ~(DSIM_FREQ_BAND_SHIFT(0x1f)); - - reg |= DSIM_FREQ_BAND_SHIFT(freq_band & 0x1f); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_PLLCTRL); -} - -void exynos_mipi_dsi_pll_freq(struct mipi_dsim_device *dsim, - unsigned int pre_divider, unsigned int main_divider, - unsigned int scaler) -{ - unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_PLLCTRL)) & - ~(0x7ffff << 1); - - reg |= (pre_divider & 0x3f) << 13 | (main_divider & 0x1ff) << 4 | - (scaler & 0x7) << 1; - - writel(reg, dsim->reg_base + EXYNOS_DSIM_PLLCTRL); -} - -void exynos_mipi_dsi_pll_stable_time(struct mipi_dsim_device *dsim, - unsigned int lock_time) -{ - writel(lock_time, dsim->reg_base + EXYNOS_DSIM_PLLTMR); -} - -void exynos_mipi_dsi_enable_pll(struct mipi_dsim_device *dsim, unsigned int enable) -{ - unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_PLLCTRL)) & - ~(DSIM_PLL_EN_SHIFT(0x1)); - - reg |= DSIM_PLL_EN_SHIFT(enable & 0x1); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_PLLCTRL); -} - -void exynos_mipi_dsi_set_byte_clock_src(struct mipi_dsim_device *dsim, - unsigned int src) -{ - unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_CLKCTRL)) & - ~(DSIM_BYTE_CLK_SRC_SHIFT(0x3)); - - reg |= (DSIM_BYTE_CLK_SRC_SHIFT(src)); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_CLKCTRL); -} - -void exynos_mipi_dsi_enable_byte_clock(struct mipi_dsim_device *dsim, - unsigned int enable) -{ - unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_CLKCTRL)) & - ~(DSIM_BYTE_CLKEN_SHIFT(0x1)); - - reg |= DSIM_BYTE_CLKEN_SHIFT(enable); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_CLKCTRL); -} - -void exynos_mipi_dsi_set_esc_clk_prs(struct mipi_dsim_device *dsim, - unsigned int enable, unsigned int prs_val) -{ - unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_CLKCTRL)) & - ~(DSIM_ESC_CLKEN_SHIFT(0x1) | 0xffff); - - reg |= DSIM_ESC_CLKEN_SHIFT(enable); - if (enable) - reg |= prs_val; - - writel(reg, dsim->reg_base + EXYNOS_DSIM_CLKCTRL); -} - -void exynos_mipi_dsi_enable_esc_clk_on_lane(struct mipi_dsim_device *dsim, - unsigned int lane_sel, unsigned int enable) -{ - unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_CLKCTRL); - - if (enable) - reg |= DSIM_LANE_ESC_CLKEN(lane_sel); - else - - reg &= ~DSIM_LANE_ESC_CLKEN(lane_sel); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_CLKCTRL); -} - -void exynos_mipi_dsi_force_dphy_stop_state(struct mipi_dsim_device *dsim, - unsigned int enable) -{ - unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_ESCMODE)) & - ~(DSIM_FORCE_STOP_STATE_SHIFT(0x1)); - - reg |= (DSIM_FORCE_STOP_STATE_SHIFT(enable & 0x1)); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_ESCMODE); -} - -unsigned int exynos_mipi_dsi_is_lane_state(struct mipi_dsim_device *dsim) -{ - unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_STATUS); - - /** - * check clock and data lane states. - * if MIPI-DSI controller was enabled at bootloader then - * TX_READY_HS_CLK is enabled otherwise STOP_STATE_CLK. - * so it should be checked for two case. - */ - if ((reg & DSIM_STOP_STATE_DAT(0xf)) && - ((reg & DSIM_STOP_STATE_CLK) || - (reg & DSIM_TX_READY_HS_CLK))) - return 1; - - return 0; -} - -void exynos_mipi_dsi_set_stop_state_counter(struct mipi_dsim_device *dsim, - unsigned int cnt_val) -{ - unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_ESCMODE)) & - ~(DSIM_STOP_STATE_CNT_SHIFT(0x7ff)); - - reg |= (DSIM_STOP_STATE_CNT_SHIFT(cnt_val & 0x7ff)); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_ESCMODE); -} - -void exynos_mipi_dsi_set_bta_timeout(struct mipi_dsim_device *dsim, - unsigned int timeout) -{ - unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_TIMEOUT)) & - ~(DSIM_BTA_TOUT_SHIFT(0xff)); - - reg |= (DSIM_BTA_TOUT_SHIFT(timeout)); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_TIMEOUT); -} - -void exynos_mipi_dsi_set_lpdr_timeout(struct mipi_dsim_device *dsim, - unsigned int timeout) -{ - unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_TIMEOUT)) & - ~(DSIM_LPDR_TOUT_SHIFT(0xffff)); - - reg |= (DSIM_LPDR_TOUT_SHIFT(timeout)); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_TIMEOUT); -} - -void exynos_mipi_dsi_set_cpu_transfer_mode(struct mipi_dsim_device *dsim, - unsigned int lp) -{ - unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_ESCMODE); - - reg &= ~DSIM_CMD_LPDT_LP; - - if (lp) - reg |= DSIM_CMD_LPDT_LP; - - writel(reg, dsim->reg_base + EXYNOS_DSIM_ESCMODE); -} - -void exynos_mipi_dsi_set_lcdc_transfer_mode(struct mipi_dsim_device *dsim, - unsigned int lp) -{ - unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_ESCMODE); - - reg &= ~DSIM_TX_LPDT_LP; - - if (lp) - reg |= DSIM_TX_LPDT_LP; - - writel(reg, dsim->reg_base + EXYNOS_DSIM_ESCMODE); -} - -void exynos_mipi_dsi_enable_hs_clock(struct mipi_dsim_device *dsim, - unsigned int enable) -{ - unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_CLKCTRL)) & - ~(DSIM_TX_REQUEST_HSCLK_SHIFT(0x1)); - - reg |= DSIM_TX_REQUEST_HSCLK_SHIFT(enable); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_CLKCTRL); -} - -void exynos_mipi_dsi_dp_dn_swap(struct mipi_dsim_device *dsim, - unsigned int swap_en) -{ - unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_PHYACCHR1); - - reg &= ~(0x3 << 0); - reg |= (swap_en & 0x3) << 0; - - writel(reg, dsim->reg_base + EXYNOS_DSIM_PHYACCHR1); -} - -void exynos_mipi_dsi_hs_zero_ctrl(struct mipi_dsim_device *dsim, - unsigned int hs_zero) -{ - unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_PLLCTRL)) & - ~(0xf << 28); - - reg |= ((hs_zero & 0xf) << 28); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_PLLCTRL); -} - -void exynos_mipi_dsi_prep_ctrl(struct mipi_dsim_device *dsim, unsigned int prep) -{ - unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_PLLCTRL)) & - ~(0x7 << 20); - - reg |= ((prep & 0x7) << 20); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_PLLCTRL); -} - -unsigned int exynos_mipi_dsi_read_interrupt(struct mipi_dsim_device *dsim) -{ - return readl(dsim->reg_base + EXYNOS_DSIM_INTSRC); -} - -void exynos_mipi_dsi_clear_interrupt(struct mipi_dsim_device *dsim, - unsigned int src) -{ - unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_INTSRC); - - reg |= src; - - writel(reg, dsim->reg_base + EXYNOS_DSIM_INTSRC); -} - -void exynos_mipi_dsi_set_interrupt(struct mipi_dsim_device *dsim, - unsigned int src, unsigned int enable) -{ - unsigned int reg = 0; - - if (enable) - reg |= src; - else - reg &= ~src; - - writel(reg, dsim->reg_base + EXYNOS_DSIM_INTSRC); -} - -unsigned int exynos_mipi_dsi_is_pll_stable(struct mipi_dsim_device *dsim) -{ - unsigned int reg; - - reg = readl(dsim->reg_base + EXYNOS_DSIM_STATUS); - - return reg & (1 << 31) ? 1 : 0; -} - -unsigned int exynos_mipi_dsi_get_fifo_state(struct mipi_dsim_device *dsim) -{ - return readl(dsim->reg_base + EXYNOS_DSIM_FIFOCTRL) & ~(0x1f); -} - -void exynos_mipi_dsi_wr_tx_header(struct mipi_dsim_device *dsim, - unsigned int di, unsigned int data0, unsigned int data1) -{ - unsigned int reg = (data1 << 16) | (data0 << 8) | ((di & 0x3f) << 0); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_PKTHDR); -} - -void exynos_mipi_dsi_rd_tx_header(struct mipi_dsim_device *dsim, - unsigned int di, unsigned int data0) -{ - unsigned int reg = (data0 << 8) | (di << 0); - - writel(reg, dsim->reg_base + EXYNOS_DSIM_PKTHDR); -} - -unsigned int exynos_mipi_dsi_rd_rx_fifo(struct mipi_dsim_device *dsim) -{ - return readl(dsim->reg_base + EXYNOS_DSIM_RXFIFO); -} - -unsigned int _exynos_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim) -{ - unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_INTSRC); - - return (reg & INTSRC_FRAME_DONE) ? 1 : 0; -} - -void _exynos_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim) -{ - unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_INTSRC); - - writel(reg | INTSRC_FRAME_DONE, dsim->reg_base + - EXYNOS_DSIM_INTSRC); -} - -void exynos_mipi_dsi_wr_tx_data(struct mipi_dsim_device *dsim, - unsigned int tx_data) -{ - writel(tx_data, dsim->reg_base + EXYNOS_DSIM_PAYLOAD); -} diff --git a/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.h b/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.h deleted file mode 100644 index 85460701c7ea..000000000000 --- a/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.h +++ /dev/null @@ -1,112 +0,0 @@ -/* linux/drivers/video/exynos/exynos_mipi_dsi_lowlevel.h - * - * Header file for Samsung SoC MIPI-DSI lowlevel driver. - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd - * - * InKi Dae <inki.dae@samsung.com> - * Donghwa Lee <dh09.lee@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef _EXYNOS_MIPI_DSI_LOWLEVEL_H -#define _EXYNOS_MIPI_DSI_LOWLEVEL_H - -void exynos_mipi_dsi_func_reset(struct mipi_dsim_device *dsim); -void exynos_mipi_dsi_sw_reset(struct mipi_dsim_device *dsim); -void exynos_mipi_dsi_sw_reset_release(struct mipi_dsim_device *dsim); -int exynos_mipi_dsi_get_sw_reset_release(struct mipi_dsim_device *dsim); -void exynos_mipi_dsi_set_interrupt_mask(struct mipi_dsim_device *dsim, - unsigned int mode, unsigned int mask); -void exynos_mipi_dsi_set_data_lane_number(struct mipi_dsim_device *dsim, - unsigned int count); -void exynos_mipi_dsi_init_fifo_pointer(struct mipi_dsim_device *dsim, - unsigned int cfg); -void exynos_mipi_dsi_set_phy_tunning(struct mipi_dsim_device *dsim, - unsigned int value); -void exynos_mipi_dsi_set_phy_tunning(struct mipi_dsim_device *dsim, - unsigned int value); -void exynos_mipi_dsi_set_main_stand_by(struct mipi_dsim_device *dsim, - unsigned int enable); -void exynos_mipi_dsi_set_main_disp_resol(struct mipi_dsim_device *dsim, - unsigned int width_resol, unsigned int height_resol); -void exynos_mipi_dsi_set_main_disp_vporch(struct mipi_dsim_device *dsim, - unsigned int cmd_allow, unsigned int vfront, unsigned int vback); -void exynos_mipi_dsi_set_main_disp_hporch(struct mipi_dsim_device *dsim, - unsigned int front, unsigned int back); -void exynos_mipi_dsi_set_main_disp_sync_area(struct mipi_dsim_device *dsim, - unsigned int vert, unsigned int hori); -void exynos_mipi_dsi_set_sub_disp_resol(struct mipi_dsim_device *dsim, - unsigned int vert, unsigned int hori); -void exynos_mipi_dsi_init_config(struct mipi_dsim_device *dsim); -void exynos_mipi_dsi_display_config(struct mipi_dsim_device *dsim, - struct mipi_dsim_config *dsim_config); -void exynos_mipi_dsi_set_data_lane_number(struct mipi_dsim_device *dsim, - unsigned int count); -void exynos_mipi_dsi_enable_lane(struct mipi_dsim_device *dsim, unsigned int lane, - unsigned int enable); -void exynos_mipi_dsi_enable_afc(struct mipi_dsim_device *dsim, unsigned int enable, - unsigned int afc_code); -void exynos_mipi_dsi_enable_pll_bypass(struct mipi_dsim_device *dsim, - unsigned int enable); -void exynos_mipi_dsi_set_pll_pms(struct mipi_dsim_device *dsim, unsigned int p, - unsigned int m, unsigned int s); -void exynos_mipi_dsi_pll_freq_band(struct mipi_dsim_device *dsim, - unsigned int freq_band); -void exynos_mipi_dsi_pll_freq(struct mipi_dsim_device *dsim, - unsigned int pre_divider, unsigned int main_divider, - unsigned int scaler); -void exynos_mipi_dsi_pll_stable_time(struct mipi_dsim_device *dsim, - unsigned int lock_time); -void exynos_mipi_dsi_enable_pll(struct mipi_dsim_device *dsim, - unsigned int enable); -void exynos_mipi_dsi_set_byte_clock_src(struct mipi_dsim_device *dsim, - unsigned int src); -void exynos_mipi_dsi_enable_byte_clock(struct mipi_dsim_device *dsim, - unsigned int enable); -void exynos_mipi_dsi_set_esc_clk_prs(struct mipi_dsim_device *dsim, - unsigned int enable, unsigned int prs_val); -void exynos_mipi_dsi_enable_esc_clk_on_lane(struct mipi_dsim_device *dsim, - unsigned int lane_sel, unsigned int enable); -void exynos_mipi_dsi_force_dphy_stop_state(struct mipi_dsim_device *dsim, - unsigned int enable); -unsigned int exynos_mipi_dsi_is_lane_state(struct mipi_dsim_device *dsim); -void exynos_mipi_dsi_set_stop_state_counter(struct mipi_dsim_device *dsim, - unsigned int cnt_val); -void exynos_mipi_dsi_set_bta_timeout(struct mipi_dsim_device *dsim, - unsigned int timeout); -void exynos_mipi_dsi_set_lpdr_timeout(struct mipi_dsim_device *dsim, - unsigned int timeout); -void exynos_mipi_dsi_set_lcdc_transfer_mode(struct mipi_dsim_device *dsim, - unsigned int lp); -void exynos_mipi_dsi_set_cpu_transfer_mode(struct mipi_dsim_device *dsim, - unsigned int lp); -void exynos_mipi_dsi_enable_hs_clock(struct mipi_dsim_device *dsim, - unsigned int enable); -void exynos_mipi_dsi_dp_dn_swap(struct mipi_dsim_device *dsim, - unsigned int swap_en); -void exynos_mipi_dsi_hs_zero_ctrl(struct mipi_dsim_device *dsim, - unsigned int hs_zero); -void exynos_mipi_dsi_prep_ctrl(struct mipi_dsim_device *dsim, unsigned int prep); -unsigned int exynos_mipi_dsi_read_interrupt(struct mipi_dsim_device *dsim); -unsigned int exynos_mipi_dsi_read_interrupt_mask(struct mipi_dsim_device *dsim); -void exynos_mipi_dsi_clear_interrupt(struct mipi_dsim_device *dsim, - unsigned int src); -void exynos_mipi_dsi_set_interrupt(struct mipi_dsim_device *dsim, - unsigned int src, unsigned int enable); -unsigned int exynos_mipi_dsi_is_pll_stable(struct mipi_dsim_device *dsim); -unsigned int exynos_mipi_dsi_get_fifo_state(struct mipi_dsim_device *dsim); -unsigned int _exynos_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim); -void _exynos_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim); -void exynos_mipi_dsi_wr_tx_header(struct mipi_dsim_device *dsim, unsigned int di, - unsigned int data0, unsigned int data1); -void exynos_mipi_dsi_wr_tx_data(struct mipi_dsim_device *dsim, - unsigned int tx_data); -void exynos_mipi_dsi_rd_tx_header(struct mipi_dsim_device *dsim, - unsigned int data0, unsigned int data1); -unsigned int exynos_mipi_dsi_rd_rx_fifo(struct mipi_dsim_device *dsim); - -#endif /* _EXYNOS_MIPI_DSI_LOWLEVEL_H */ diff --git a/drivers/video/fbdev/exynos/exynos_mipi_dsi_regs.h b/drivers/video/fbdev/exynos/exynos_mipi_dsi_regs.h deleted file mode 100644 index 4227106d3fd0..000000000000 --- a/drivers/video/fbdev/exynos/exynos_mipi_dsi_regs.h +++ /dev/null @@ -1,149 +0,0 @@ -/* linux/driver/video/exynos/exynos_mipi_dsi_regs.h - * - * Register definition file for Samsung MIPI-DSIM driver - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd - * - * InKi Dae <inki.dae@samsung.com> - * Donghwa Lee <dh09.lee@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef _EXYNOS_MIPI_DSI_REGS_H -#define _EXYNOS_MIPI_DSI_REGS_H - -#define EXYNOS_DSIM_STATUS 0x0 /* Status register */ -#define EXYNOS_DSIM_SWRST 0x4 /* Software reset register */ -#define EXYNOS_DSIM_CLKCTRL 0x8 /* Clock control register */ -#define EXYNOS_DSIM_TIMEOUT 0xc /* Time out register */ -#define EXYNOS_DSIM_CONFIG 0x10 /* Configuration register */ -#define EXYNOS_DSIM_ESCMODE 0x14 /* Escape mode register */ - -/* Main display image resolution register */ -#define EXYNOS_DSIM_MDRESOL 0x18 -#define EXYNOS_DSIM_MVPORCH 0x1c /* Main display Vporch register */ -#define EXYNOS_DSIM_MHPORCH 0x20 /* Main display Hporch register */ -#define EXYNOS_DSIM_MSYNC 0x24 /* Main display sync area register */ - -/* Sub display image resolution register */ -#define EXYNOS_DSIM_SDRESOL 0x28 -#define EXYNOS_DSIM_INTSRC 0x2c /* Interrupt source register */ -#define EXYNOS_DSIM_INTMSK 0x30 /* Interrupt mask register */ -#define EXYNOS_DSIM_PKTHDR 0x34 /* Packet Header FIFO register */ -#define EXYNOS_DSIM_PAYLOAD 0x38 /* Payload FIFO register */ -#define EXYNOS_DSIM_RXFIFO 0x3c /* Read FIFO register */ -#define EXYNOS_DSIM_FIFOTHLD 0x40 /* FIFO threshold level register */ -#define EXYNOS_DSIM_FIFOCTRL 0x44 /* FIFO status and control register */ - -/* FIFO memory AC characteristic register */ -#define EXYNOS_DSIM_PLLCTRL 0x4c /* PLL control register */ -#define EXYNOS_DSIM_PLLTMR 0x50 /* PLL timer register */ -#define EXYNOS_DSIM_PHYACCHR 0x54 /* D-PHY AC characteristic register */ -#define EXYNOS_DSIM_PHYACCHR1 0x58 /* D-PHY AC characteristic register1 */ - -/* DSIM_STATUS */ -#define DSIM_STOP_STATE_DAT(x) (((x) & 0xf) << 0) -#define DSIM_STOP_STATE_CLK (1 << 8) -#define DSIM_TX_READY_HS_CLK (1 << 10) - -/* DSIM_SWRST */ -#define DSIM_FUNCRST (1 << 16) -#define DSIM_SWRST (1 << 0) - -/* EXYNOS_DSIM_TIMEOUT */ -#define DSIM_LPDR_TOUT_SHIFT(x) ((x) << 0) -#define DSIM_BTA_TOUT_SHIFT(x) ((x) << 16) - -/* EXYNOS_DSIM_CLKCTRL */ -#define DSIM_LANE_ESC_CLKEN(x) (((x) & 0x1f) << 19) -#define DSIM_BYTE_CLKEN_SHIFT(x) ((x) << 24) -#define DSIM_BYTE_CLK_SRC_SHIFT(x) ((x) << 25) -#define DSIM_PLL_BYPASS_SHIFT(x) ((x) << 27) -#define DSIM_ESC_CLKEN_SHIFT(x) ((x) << 28) -#define DSIM_TX_REQUEST_HSCLK_SHIFT(x) ((x) << 31) - -/* EXYNOS_DSIM_CONFIG */ -#define DSIM_LANE_ENx(x) (((x) & 0x1f) << 0) -#define DSIM_NUM_OF_DATALANE_SHIFT(x) ((x) << 5) -#define DSIM_HSA_MODE_SHIFT(x) ((x) << 20) -#define DSIM_HBP_MODE_SHIFT(x) ((x) << 21) -#define DSIM_HFP_MODE_SHIFT(x) ((x) << 22) -#define DSIM_HSE_MODE_SHIFT(x) ((x) << 23) -#define DSIM_AUTO_MODE_SHIFT(x) ((x) << 24) -#define DSIM_EOT_DISABLE(x) ((x) << 28) -#define DSIM_AUTO_FLUSH(x) ((x) << 29) - -#define DSIM_NUM_OF_DATA_LANE(x) ((x) << DSIM_NUM_OF_DATALANE_SHIFT) - -/* EXYNOS_DSIM_ESCMODE */ -#define DSIM_TX_LPDT_LP (1 << 6) -#define DSIM_CMD_LPDT_LP (1 << 7) -#define DSIM_FORCE_STOP_STATE_SHIFT(x) ((x) << 20) -#define DSIM_STOP_STATE_CNT_SHIFT(x) ((x) << 21) - -/* EXYNOS_DSIM_MDRESOL */ -#define DSIM_MAIN_STAND_BY (1 << 31) -#define DSIM_MAIN_VRESOL(x) (((x) & 0x7ff) << 16) -#define DSIM_MAIN_HRESOL(x) (((x) & 0X7ff) << 0) - -/* EXYNOS_DSIM_MVPORCH */ -#define DSIM_CMD_ALLOW_SHIFT(x) ((x) << 28) -#define DSIM_STABLE_VFP_SHIFT(x) ((x) << 16) -#define DSIM_MAIN_VBP_SHIFT(x) ((x) << 0) -#define DSIM_CMD_ALLOW_MASK (0xf << 28) -#define DSIM_STABLE_VFP_MASK (0x7ff << 16) -#define DSIM_MAIN_VBP_MASK (0x7ff << 0) - -/* EXYNOS_DSIM_MHPORCH */ -#define DSIM_MAIN_HFP_SHIFT(x) ((x) << 16) -#define DSIM_MAIN_HBP_SHIFT(x) ((x) << 0) -#define DSIM_MAIN_HFP_MASK ((0xffff) << 16) -#define DSIM_MAIN_HBP_MASK ((0xffff) << 0) - -/* EXYNOS_DSIM_MSYNC */ -#define DSIM_MAIN_VSA_SHIFT(x) ((x) << 22) -#define DSIM_MAIN_HSA_SHIFT(x) ((x) << 0) -#define DSIM_MAIN_VSA_MASK ((0x3ff) << 22) -#define DSIM_MAIN_HSA_MASK ((0xffff) << 0) - -/* EXYNOS_DSIM_SDRESOL */ -#define DSIM_SUB_STANDY_SHIFT(x) ((x) << 31) -#define DSIM_SUB_VRESOL_SHIFT(x) ((x) << 16) -#define DSIM_SUB_HRESOL_SHIFT(x) ((x) << 0) -#define DSIM_SUB_STANDY_MASK ((0x1) << 31) -#define DSIM_SUB_VRESOL_MASK ((0x7ff) << 16) -#define DSIM_SUB_HRESOL_MASK ((0x7ff) << 0) - -/* EXYNOS_DSIM_INTSRC */ -#define INTSRC_PLL_STABLE (1 << 31) -#define INTSRC_SW_RST_RELEASE (1 << 30) -#define INTSRC_SFR_FIFO_EMPTY (1 << 29) -#define INTSRC_FRAME_DONE (1 << 24) -#define INTSRC_RX_DATA_DONE (1 << 18) - -/* EXYNOS_DSIM_INTMSK */ -#define INTMSK_FIFO_EMPTY (1 << 29) -#define INTMSK_BTA (1 << 25) -#define INTMSK_FRAME_DONE (1 << 24) -#define INTMSK_RX_TIMEOUT (1 << 21) -#define INTMSK_BTA_TIMEOUT (1 << 20) -#define INTMSK_RX_DONE (1 << 18) -#define INTMSK_RX_TE (1 << 17) -#define INTMSK_RX_ACK (1 << 16) -#define INTMSK_RX_ECC_ERR (1 << 15) -#define INTMSK_RX_CRC_ERR (1 << 14) - -/* EXYNOS_DSIM_FIFOCTRL */ -#define SFR_HEADER_EMPTY (1 << 22) - -/* EXYNOS_DSIM_PHYACCHR */ -#define DSIM_AFC_CTL(x) (((x) & 0x7) << 5) - -/* EXYNOS_DSIM_PLLCTRL */ -#define DSIM_PLL_EN_SHIFT(x) ((x) << 23) -#define DSIM_FREQ_BAND_SHIFT(x) ((x) << 24) - -#endif /* _EXYNOS_MIPI_DSI_REGS_H */ diff --git a/drivers/video/fbdev/exynos/s6e8ax0.c b/drivers/video/fbdev/exynos/s6e8ax0.c deleted file mode 100644 index de2f3e793786..000000000000 --- a/drivers/video/fbdev/exynos/s6e8ax0.c +++ /dev/null @@ -1,887 +0,0 @@ -/* linux/drivers/video/exynos/s6e8ax0.c - * - * MIPI-DSI based s6e8ax0 AMOLED lcd 4.65 inch panel driver. - * - * Inki Dae, <inki.dae@samsung.com> - * Donghwa Lee, <dh09.lee@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/mutex.h> -#include <linux/wait.h> -#include <linux/ctype.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/lcd.h> -#include <linux/fb.h> -#include <linux/backlight.h> -#include <linux/regulator/consumer.h> - -#include <video/mipi_display.h> -#include <video/exynos_mipi_dsim.h> - -#define LDI_MTP_LENGTH 24 -#define DSIM_PM_STABLE_TIME 10 -#define MIN_BRIGHTNESS 0 -#define MAX_BRIGHTNESS 24 -#define GAMMA_TABLE_COUNT 26 - -#define POWER_IS_ON(pwr) ((pwr) == FB_BLANK_UNBLANK) -#define POWER_IS_OFF(pwr) ((pwr) == FB_BLANK_POWERDOWN) -#define POWER_IS_NRM(pwr) ((pwr) == FB_BLANK_NORMAL) - -#define lcd_to_master(a) (a->dsim_dev->master) -#define lcd_to_master_ops(a) ((lcd_to_master(a))->master_ops) - -enum { - DSIM_NONE_STATE = 0, - DSIM_RESUME_COMPLETE = 1, - DSIM_FRAME_DONE = 2, -}; - -struct s6e8ax0 { - struct device *dev; - unsigned int power; - unsigned int id; - unsigned int gamma; - unsigned int acl_enable; - unsigned int cur_acl; - - struct lcd_device *ld; - struct backlight_device *bd; - - struct mipi_dsim_lcd_device *dsim_dev; - struct lcd_platform_data *ddi_pd; - struct mutex lock; - bool enabled; -}; - - -static struct regulator_bulk_data supplies[] = { - { .supply = "vdd3", }, - { .supply = "vci", }, -}; - -static void s6e8ax0_regulator_enable(struct s6e8ax0 *lcd) -{ - int ret = 0; - struct lcd_platform_data *pd = NULL; - - pd = lcd->ddi_pd; - mutex_lock(&lcd->lock); - if (!lcd->enabled) { - ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies); - if (ret) - goto out; - - lcd->enabled = true; - } - msleep(pd->power_on_delay); -out: - mutex_unlock(&lcd->lock); -} - -static void s6e8ax0_regulator_disable(struct s6e8ax0 *lcd) -{ - int ret = 0; - - mutex_lock(&lcd->lock); - if (lcd->enabled) { - ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies); - if (ret) - goto out; - - lcd->enabled = false; - } -out: - mutex_unlock(&lcd->lock); -} - -static const unsigned char s6e8ax0_22_gamma_30[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xf5, 0x00, 0xff, 0xad, 0xaf, - 0xbA, 0xc3, 0xd8, 0xc5, 0x9f, 0xc6, 0x9e, 0xc1, 0xdc, 0xc0, - 0x00, 0x61, 0x00, 0x5a, 0x00, 0x74, -}; - -static const unsigned char s6e8ax0_22_gamma_50[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xe8, 0x1f, 0xf7, 0xad, 0xc0, - 0xb5, 0xc4, 0xdc, 0xc4, 0x9e, 0xc6, 0x9c, 0xbb, 0xd8, 0xbb, - 0x00, 0x70, 0x00, 0x68, 0x00, 0x86, -}; - -static const unsigned char s6e8ax0_22_gamma_60[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xde, 0x1f, 0xef, 0xad, 0xc4, - 0xb3, 0xc3, 0xdd, 0xc4, 0x9e, 0xc6, 0x9c, 0xbc, 0xd6, 0xba, - 0x00, 0x75, 0x00, 0x6e, 0x00, 0x8d, -}; - -static const unsigned char s6e8ax0_22_gamma_70[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xd8, 0x1f, 0xe7, 0xaf, 0xc8, - 0xb4, 0xc4, 0xdd, 0xc3, 0x9d, 0xc6, 0x9c, 0xbb, 0xd6, 0xb9, - 0x00, 0x7a, 0x00, 0x72, 0x00, 0x93, -}; - -static const unsigned char s6e8ax0_22_gamma_80[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xc9, 0x1f, 0xde, 0xae, 0xc9, - 0xb1, 0xc3, 0xdd, 0xc2, 0x9d, 0xc5, 0x9b, 0xbc, 0xd6, 0xbb, - 0x00, 0x7f, 0x00, 0x77, 0x00, 0x99, -}; - -static const unsigned char s6e8ax0_22_gamma_90[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xc7, 0x1f, 0xd9, 0xb0, 0xcc, - 0xb2, 0xc3, 0xdc, 0xc1, 0x9c, 0xc6, 0x9c, 0xbc, 0xd4, 0xb9, - 0x00, 0x83, 0x00, 0x7b, 0x00, 0x9e, -}; - -static const unsigned char s6e8ax0_22_gamma_100[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xbd, 0x80, 0xcd, 0xba, 0xce, - 0xb3, 0xc4, 0xde, 0xc3, 0x9c, 0xc4, 0x9, 0xb8, 0xd3, 0xb6, - 0x00, 0x88, 0x00, 0x80, 0x00, 0xa5, -}; - -static const unsigned char s6e8ax0_22_gamma_120[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xb9, 0x95, 0xc8, 0xb1, 0xcf, - 0xb2, 0xc6, 0xdf, 0xc5, 0x9b, 0xc3, 0x99, 0xb6, 0xd2, 0xb6, - 0x00, 0x8f, 0x00, 0x86, 0x00, 0xac, -}; - -static const unsigned char s6e8ax0_22_gamma_130[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xb7, 0xa0, 0xc7, 0xb1, 0xd0, - 0xb2, 0xc4, 0xdd, 0xc3, 0x9a, 0xc3, 0x98, 0xb6, 0xd0, 0xb4, - 0x00, 0x92, 0x00, 0x8a, 0x00, 0xb1, -}; - -static const unsigned char s6e8ax0_22_gamma_140[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xb7, 0xa0, 0xc5, 0xb2, 0xd0, - 0xb3, 0xc3, 0xde, 0xc3, 0x9b, 0xc2, 0x98, 0xb6, 0xd0, 0xb4, - 0x00, 0x95, 0x00, 0x8d, 0x00, 0xb5, -}; - -static const unsigned char s6e8ax0_22_gamma_150[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xb3, 0xa0, 0xc2, 0xb2, 0xd0, - 0xb2, 0xc1, 0xdd, 0xc2, 0x9b, 0xc2, 0x98, 0xb4, 0xcf, 0xb1, - 0x00, 0x99, 0x00, 0x90, 0x00, 0xba, -}; - -static const unsigned char s6e8ax0_22_gamma_160[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xaf, 0xa5, 0xbf, 0xb0, 0xd0, - 0xb1, 0xc3, 0xde, 0xc2, 0x99, 0xc1, 0x97, 0xb4, 0xce, 0xb1, - 0x00, 0x9c, 0x00, 0x93, 0x00, 0xbe, -}; - -static const unsigned char s6e8ax0_22_gamma_170[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xaf, 0xb5, 0xbf, 0xb1, 0xd1, - 0xb1, 0xc3, 0xde, 0xc3, 0x99, 0xc0, 0x96, 0xb4, 0xce, 0xb1, - 0x00, 0x9f, 0x00, 0x96, 0x00, 0xc2, -}; - -static const unsigned char s6e8ax0_22_gamma_180[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xaf, 0xb7, 0xbe, 0xb3, 0xd2, - 0xb3, 0xc3, 0xde, 0xc2, 0x97, 0xbf, 0x95, 0xb4, 0xcd, 0xb1, - 0x00, 0xa2, 0x00, 0x99, 0x00, 0xc5, -}; - -static const unsigned char s6e8ax0_22_gamma_190[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xaf, 0xb9, 0xbe, 0xb2, 0xd2, - 0xb2, 0xc3, 0xdd, 0xc3, 0x98, 0xbf, 0x95, 0xb2, 0xcc, 0xaf, - 0x00, 0xa5, 0x00, 0x9c, 0x00, 0xc9, -}; - -static const unsigned char s6e8ax0_22_gamma_200[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xaf, 0xb9, 0xbc, 0xb2, 0xd2, - 0xb1, 0xc4, 0xdd, 0xc3, 0x97, 0xbe, 0x95, 0xb1, 0xcb, 0xae, - 0x00, 0xa8, 0x00, 0x9f, 0x00, 0xcd, -}; - -static const unsigned char s6e8ax0_22_gamma_210[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xb1, 0xc1, 0xbd, 0xb1, 0xd1, - 0xb1, 0xc2, 0xde, 0xc2, 0x97, 0xbe, 0x94, 0xB0, 0xc9, 0xad, - 0x00, 0xae, 0x00, 0xa4, 0x00, 0xd4, -}; - -static const unsigned char s6e8ax0_22_gamma_220[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xb1, 0xc7, 0xbd, 0xb1, 0xd1, - 0xb1, 0xc2, 0xdd, 0xc2, 0x97, 0xbd, 0x94, 0xb0, 0xc9, 0xad, - 0x00, 0xad, 0x00, 0xa2, 0x00, 0xd3, -}; - -static const unsigned char s6e8ax0_22_gamma_230[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xb1, 0xc3, 0xbd, 0xb2, 0xd1, - 0xb1, 0xc3, 0xdd, 0xc1, 0x96, 0xbd, 0x94, 0xb0, 0xc9, 0xad, - 0x00, 0xb0, 0x00, 0xa7, 0x00, 0xd7, -}; - -static const unsigned char s6e8ax0_22_gamma_240[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xb1, 0xcb, 0xbd, 0xb1, 0xd2, - 0xb1, 0xc3, 0xdD, 0xc2, 0x95, 0xbd, 0x93, 0xaf, 0xc8, 0xab, - 0x00, 0xb3, 0x00, 0xa9, 0x00, 0xdb, -}; - -static const unsigned char s6e8ax0_22_gamma_250[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xb3, 0xcc, 0xbe, 0xb0, 0xd2, - 0xb0, 0xc3, 0xdD, 0xc2, 0x94, 0xbc, 0x92, 0xae, 0xc8, 0xab, - 0x00, 0xb6, 0x00, 0xab, 0x00, 0xde, -}; - -static const unsigned char s6e8ax0_22_gamma_260[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xb3, 0xd0, 0xbe, 0xaf, 0xd1, - 0xaf, 0xc2, 0xdd, 0xc1, 0x96, 0xbc, 0x93, 0xaf, 0xc8, 0xac, - 0x00, 0xb7, 0x00, 0xad, 0x00, 0xe0, -}; - -static const unsigned char s6e8ax0_22_gamma_270[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xb2, 0xcF, 0xbd, 0xb0, 0xd2, - 0xaf, 0xc2, 0xdc, 0xc1, 0x95, 0xbd, 0x93, 0xae, 0xc6, 0xaa, - 0x00, 0xba, 0x00, 0xb0, 0x00, 0xe4, -}; - -static const unsigned char s6e8ax0_22_gamma_280[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xb2, 0xd0, 0xbd, 0xaf, 0xd0, - 0xad, 0xc4, 0xdd, 0xc3, 0x95, 0xbd, 0x93, 0xac, 0xc5, 0xa9, - 0x00, 0xbd, 0x00, 0xb2, 0x00, 0xe7, -}; - -static const unsigned char s6e8ax0_22_gamma_300[] = { - 0xfa, 0x01, 0x60, 0x10, 0x60, 0xb5, 0xd3, 0xbd, 0xb1, 0xd2, - 0xb0, 0xc0, 0xdc, 0xc0, 0x94, 0xba, 0x91, 0xac, 0xc5, 0xa9, - 0x00, 0xc2, 0x00, 0xb7, 0x00, 0xed, -}; - -static const unsigned char *s6e8ax0_22_gamma_table[] = { - s6e8ax0_22_gamma_30, - s6e8ax0_22_gamma_50, - s6e8ax0_22_gamma_60, - s6e8ax0_22_gamma_70, - s6e8ax0_22_gamma_80, - s6e8ax0_22_gamma_90, - s6e8ax0_22_gamma_100, - s6e8ax0_22_gamma_120, - s6e8ax0_22_gamma_130, - s6e8ax0_22_gamma_140, - s6e8ax0_22_gamma_150, - s6e8ax0_22_gamma_160, - s6e8ax0_22_gamma_170, - s6e8ax0_22_gamma_180, - s6e8ax0_22_gamma_190, - s6e8ax0_22_gamma_200, - s6e8ax0_22_gamma_210, - s6e8ax0_22_gamma_220, - s6e8ax0_22_gamma_230, - s6e8ax0_22_gamma_240, - s6e8ax0_22_gamma_250, - s6e8ax0_22_gamma_260, - s6e8ax0_22_gamma_270, - s6e8ax0_22_gamma_280, - s6e8ax0_22_gamma_300, -}; - -static void s6e8ax0_panel_cond(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - - static const unsigned char data_to_send[] = { - 0xf8, 0x3d, 0x35, 0x00, 0x00, 0x00, 0x93, 0x00, 0x3c, 0x7d, - 0x08, 0x27, 0x7d, 0x3f, 0x00, 0x00, 0x00, 0x20, 0x04, 0x08, - 0x6e, 0x00, 0x00, 0x00, 0x02, 0x08, 0x08, 0x23, 0x23, 0xc0, - 0xc8, 0x08, 0x48, 0xc1, 0x00, 0xc1, 0xff, 0xff, 0xc8 - }; - static const unsigned char data_to_send_panel_reverse[] = { - 0xf8, 0x19, 0x35, 0x00, 0x00, 0x00, 0x93, 0x00, 0x3c, 0x7d, - 0x08, 0x27, 0x7d, 0x3f, 0x00, 0x00, 0x00, 0x20, 0x04, 0x08, - 0x6e, 0x00, 0x00, 0x00, 0x02, 0x08, 0x08, 0x23, 0x23, 0xc0, - 0xc1, 0x01, 0x41, 0xc1, 0x00, 0xc1, 0xf6, 0xf6, 0xc1 - }; - - if (lcd->dsim_dev->panel_reverse) - ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE, - data_to_send_panel_reverse, - ARRAY_SIZE(data_to_send_panel_reverse)); - else - ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE, - data_to_send, ARRAY_SIZE(data_to_send)); -} - -static void s6e8ax0_display_cond(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - static const unsigned char data_to_send[] = { - 0xf2, 0x80, 0x03, 0x0d - }; - - ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE, - data_to_send, ARRAY_SIZE(data_to_send)); -} - -/* Gamma 2.2 Setting (200cd, 7500K, 10MPCD) */ -static void s6e8ax0_gamma_cond(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - unsigned int gamma = lcd->bd->props.brightness; - - ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE, - s6e8ax0_22_gamma_table[gamma], - GAMMA_TABLE_COUNT); -} - -static void s6e8ax0_gamma_update(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - static const unsigned char data_to_send[] = { - 0xf7, 0x03 - }; - - ops->cmd_write(lcd_to_master(lcd), - MIPI_DSI_DCS_SHORT_WRITE_PARAM, data_to_send, - ARRAY_SIZE(data_to_send)); -} - -static void s6e8ax0_etc_cond1(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - static const unsigned char data_to_send[] = { - 0xd1, 0xfe, 0x80, 0x00, 0x01, 0x0b, 0x00, 0x00, 0x40, - 0x0d, 0x00, 0x00 - }; - - ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE, - data_to_send, ARRAY_SIZE(data_to_send)); -} - -static void s6e8ax0_etc_cond2(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - static const unsigned char data_to_send[] = { - 0xb6, 0x0c, 0x02, 0x03, 0x32, 0xff, 0x44, 0x44, 0xc0, - 0x00 - }; - - ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE, - data_to_send, ARRAY_SIZE(data_to_send)); -} - -static void s6e8ax0_etc_cond3(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - static const unsigned char data_to_send[] = { - 0xe1, 0x10, 0x1c, 0x17, 0x08, 0x1d - }; - - ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE, - data_to_send, ARRAY_SIZE(data_to_send)); -} - -static void s6e8ax0_etc_cond4(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - static const unsigned char data_to_send[] = { - 0xe2, 0xed, 0x07, 0xc3, 0x13, 0x0d, 0x03 - }; - - ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE, - data_to_send, ARRAY_SIZE(data_to_send)); -} - -static void s6e8ax0_etc_cond5(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - static const unsigned char data_to_send[] = { - 0xf4, 0xcf, 0x0a, 0x12, 0x10, 0x19, 0x33, 0x02 - }; - - ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE, - data_to_send, ARRAY_SIZE(data_to_send)); -} -static void s6e8ax0_etc_cond6(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - static const unsigned char data_to_send[] = { - 0xe3, 0x40 - }; - - ops->cmd_write(lcd_to_master(lcd), - MIPI_DSI_DCS_SHORT_WRITE_PARAM, - data_to_send, ARRAY_SIZE(data_to_send)); -} - -static void s6e8ax0_etc_cond7(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - static const unsigned char data_to_send[] = { - 0xe4, 0x00, 0x00, 0x14, 0x80, 0x00, 0x00, 0x00 - }; - - ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE, - data_to_send, ARRAY_SIZE(data_to_send)); -} - -static void s6e8ax0_elvss_set(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - static const unsigned char data_to_send[] = { - 0xb1, 0x04, 0x00 - }; - - ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE, - data_to_send, ARRAY_SIZE(data_to_send)); -} - -static void s6e8ax0_elvss_nvm_set(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - static const unsigned char data_to_send[] = { - 0xd9, 0x5c, 0x20, 0x0c, 0x0f, 0x41, 0x00, 0x10, 0x11, - 0x12, 0xd1, 0x00, 0x00, 0x00, 0x00, 0x80, 0xcb, 0xed, - 0x64, 0xaf - }; - - ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE, - data_to_send, ARRAY_SIZE(data_to_send)); -} - -static void s6e8ax0_sleep_in(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - static const unsigned char data_to_send[] = { - 0x10, 0x00 - }; - - ops->cmd_write(lcd_to_master(lcd), - MIPI_DSI_DCS_SHORT_WRITE, - data_to_send, ARRAY_SIZE(data_to_send)); -} - -static void s6e8ax0_sleep_out(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - static const unsigned char data_to_send[] = { - 0x11, 0x00 - }; - - ops->cmd_write(lcd_to_master(lcd), - MIPI_DSI_DCS_SHORT_WRITE, - data_to_send, ARRAY_SIZE(data_to_send)); -} - -static void s6e8ax0_display_on(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - static const unsigned char data_to_send[] = { - 0x29, 0x00 - }; - - ops->cmd_write(lcd_to_master(lcd), - MIPI_DSI_DCS_SHORT_WRITE, - data_to_send, ARRAY_SIZE(data_to_send)); -} - -static void s6e8ax0_display_off(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - static const unsigned char data_to_send[] = { - 0x28, 0x00 - }; - - ops->cmd_write(lcd_to_master(lcd), - MIPI_DSI_DCS_SHORT_WRITE, - data_to_send, ARRAY_SIZE(data_to_send)); -} - -static void s6e8ax0_apply_level2_key(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - static const unsigned char data_to_send[] = { - 0xf0, 0x5a, 0x5a - }; - - ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE, - data_to_send, ARRAY_SIZE(data_to_send)); -} - -static void s6e8ax0_acl_on(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - static const unsigned char data_to_send[] = { - 0xc0, 0x01 - }; - - ops->cmd_write(lcd_to_master(lcd), - MIPI_DSI_DCS_SHORT_WRITE, - data_to_send, ARRAY_SIZE(data_to_send)); -} - -static void s6e8ax0_acl_off(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - static const unsigned char data_to_send[] = { - 0xc0, 0x00 - }; - - ops->cmd_write(lcd_to_master(lcd), - MIPI_DSI_DCS_SHORT_WRITE, - data_to_send, ARRAY_SIZE(data_to_send)); -} - -/* Full white 50% reducing setting */ -static void s6e8ax0_acl_ctrl_set(struct s6e8ax0 *lcd) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - /* Full white 50% reducing setting */ - static const unsigned char cutoff_50[] = { - 0xc1, 0x47, 0x53, 0x13, 0x53, 0x00, 0x00, 0x02, 0xcf, - 0x00, 0x00, 0x04, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x01, 0x08, 0x0f, 0x16, 0x1d, 0x24, 0x2a, 0x31, 0x38, - 0x3f, 0x46 - }; - /* Full white 45% reducing setting */ - static const unsigned char cutoff_45[] = { - 0xc1, 0x47, 0x53, 0x13, 0x53, 0x00, 0x00, 0x02, 0xcf, - 0x00, 0x00, 0x04, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x01, 0x07, 0x0d, 0x13, 0x19, 0x1f, 0x25, 0x2b, 0x31, - 0x37, 0x3d - }; - /* Full white 40% reducing setting */ - static const unsigned char cutoff_40[] = { - 0xc1, 0x47, 0x53, 0x13, 0x53, 0x00, 0x00, 0x02, 0xcf, - 0x00, 0x00, 0x04, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x01, 0x06, 0x0c, 0x11, 0x16, 0x1c, 0x21, 0x26, 0x2b, - 0x31, 0x36 - }; - - if (lcd->acl_enable) { - if (lcd->cur_acl == 0) { - if (lcd->gamma == 0 || lcd->gamma == 1) { - s6e8ax0_acl_off(lcd); - dev_dbg(&lcd->ld->dev, - "cur_acl=%d\n", lcd->cur_acl); - } else - s6e8ax0_acl_on(lcd); - } - switch (lcd->gamma) { - case 0: /* 30cd */ - s6e8ax0_acl_off(lcd); - lcd->cur_acl = 0; - break; - case 1 ... 3: /* 50cd ~ 90cd */ - ops->cmd_write(lcd_to_master(lcd), - MIPI_DSI_DCS_LONG_WRITE, - cutoff_40, - ARRAY_SIZE(cutoff_40)); - lcd->cur_acl = 40; - break; - case 4 ... 7: /* 120cd ~ 210cd */ - ops->cmd_write(lcd_to_master(lcd), - MIPI_DSI_DCS_LONG_WRITE, - cutoff_45, - ARRAY_SIZE(cutoff_45)); - lcd->cur_acl = 45; - break; - case 8 ... 10: /* 220cd ~ 300cd */ - ops->cmd_write(lcd_to_master(lcd), - MIPI_DSI_DCS_LONG_WRITE, - cutoff_50, - ARRAY_SIZE(cutoff_50)); - lcd->cur_acl = 50; - break; - default: - break; - } - } else { - s6e8ax0_acl_off(lcd); - lcd->cur_acl = 0; - dev_dbg(&lcd->ld->dev, "cur_acl = %d\n", lcd->cur_acl); - } -} - -static void s6e8ax0_read_id(struct s6e8ax0 *lcd, u8 *mtp_id) -{ - unsigned int ret; - unsigned int addr = 0xd1; /* MTP ID */ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - - ret = ops->cmd_read(lcd_to_master(lcd), - MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM, - addr, 3, mtp_id); -} - -static int s6e8ax0_panel_init(struct s6e8ax0 *lcd) -{ - s6e8ax0_apply_level2_key(lcd); - s6e8ax0_sleep_out(lcd); - msleep(1); - s6e8ax0_panel_cond(lcd); - s6e8ax0_display_cond(lcd); - s6e8ax0_gamma_cond(lcd); - s6e8ax0_gamma_update(lcd); - - s6e8ax0_etc_cond1(lcd); - s6e8ax0_etc_cond2(lcd); - s6e8ax0_etc_cond3(lcd); - s6e8ax0_etc_cond4(lcd); - s6e8ax0_etc_cond5(lcd); - s6e8ax0_etc_cond6(lcd); - s6e8ax0_etc_cond7(lcd); - - s6e8ax0_elvss_nvm_set(lcd); - s6e8ax0_elvss_set(lcd); - - s6e8ax0_acl_ctrl_set(lcd); - s6e8ax0_acl_on(lcd); - - /* if ID3 value is not 33h, branch private elvss mode */ - msleep(lcd->ddi_pd->power_on_delay); - - return 0; -} - -static int s6e8ax0_update_gamma_ctrl(struct s6e8ax0 *lcd, int brightness) -{ - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - - ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE, - s6e8ax0_22_gamma_table[brightness], - ARRAY_SIZE(s6e8ax0_22_gamma_table)); - - /* update gamma table. */ - s6e8ax0_gamma_update(lcd); - lcd->gamma = brightness; - - return 0; -} - -static int s6e8ax0_gamma_ctrl(struct s6e8ax0 *lcd, int gamma) -{ - s6e8ax0_update_gamma_ctrl(lcd, gamma); - - return 0; -} - -static int s6e8ax0_set_power(struct lcd_device *ld, int power) -{ - struct s6e8ax0 *lcd = lcd_get_data(ld); - struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd); - int ret = 0; - - if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN && - power != FB_BLANK_NORMAL) { - dev_err(lcd->dev, "power value should be 0, 1 or 4.\n"); - return -EINVAL; - } - - if ((power == FB_BLANK_UNBLANK) && ops->set_blank_mode) { - /* LCD power on */ - if ((POWER_IS_ON(power) && POWER_IS_OFF(lcd->power)) - || (POWER_IS_ON(power) && POWER_IS_NRM(lcd->power))) { - ret = ops->set_blank_mode(lcd_to_master(lcd), power); - if (!ret && lcd->power != power) - lcd->power = power; - } - } else if ((power == FB_BLANK_POWERDOWN) && ops->set_early_blank_mode) { - /* LCD power off */ - if ((POWER_IS_OFF(power) && POWER_IS_ON(lcd->power)) || - (POWER_IS_ON(lcd->power) && POWER_IS_NRM(power))) { - ret = ops->set_early_blank_mode(lcd_to_master(lcd), - power); - if (!ret && lcd->power != power) - lcd->power = power; - } - } - - return ret; -} - -static int s6e8ax0_get_power(struct lcd_device *ld) -{ - struct s6e8ax0 *lcd = lcd_get_data(ld); - - return lcd->power; -} - -static int s6e8ax0_set_brightness(struct backlight_device *bd) -{ - int ret = 0, brightness = bd->props.brightness; - struct s6e8ax0 *lcd = bl_get_data(bd); - - if (brightness < MIN_BRIGHTNESS || - brightness > bd->props.max_brightness) { - dev_err(lcd->dev, "lcd brightness should be %d to %d.\n", - MIN_BRIGHTNESS, MAX_BRIGHTNESS); - return -EINVAL; - } - - ret = s6e8ax0_gamma_ctrl(lcd, brightness); - if (ret) { - dev_err(&bd->dev, "lcd brightness setting failed.\n"); - return -EIO; - } - - return ret; -} - -static struct lcd_ops s6e8ax0_lcd_ops = { - .set_power = s6e8ax0_set_power, - .get_power = s6e8ax0_get_power, -}; - -static const struct backlight_ops s6e8ax0_backlight_ops = { - .update_status = s6e8ax0_set_brightness, -}; - -static void s6e8ax0_power_on(struct mipi_dsim_lcd_device *dsim_dev, int power) -{ - struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev); - - msleep(lcd->ddi_pd->power_on_delay); - - /* lcd power on */ - if (power) - s6e8ax0_regulator_enable(lcd); - else - s6e8ax0_regulator_disable(lcd); - - msleep(lcd->ddi_pd->reset_delay); - - /* lcd reset */ - if (lcd->ddi_pd->reset) - lcd->ddi_pd->reset(lcd->ld); - msleep(5); -} - -static void s6e8ax0_set_sequence(struct mipi_dsim_lcd_device *dsim_dev) -{ - struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev); - - s6e8ax0_panel_init(lcd); - s6e8ax0_display_on(lcd); - - lcd->power = FB_BLANK_UNBLANK; -} - -static int s6e8ax0_probe(struct mipi_dsim_lcd_device *dsim_dev) -{ - struct s6e8ax0 *lcd; - int ret; - u8 mtp_id[3] = {0, }; - - lcd = devm_kzalloc(&dsim_dev->dev, sizeof(struct s6e8ax0), GFP_KERNEL); - if (!lcd) { - dev_err(&dsim_dev->dev, "failed to allocate s6e8ax0 structure.\n"); - return -ENOMEM; - } - - lcd->dsim_dev = dsim_dev; - lcd->ddi_pd = (struct lcd_platform_data *)dsim_dev->platform_data; - lcd->dev = &dsim_dev->dev; - - mutex_init(&lcd->lock); - - ret = devm_regulator_bulk_get(lcd->dev, ARRAY_SIZE(supplies), supplies); - if (ret) { - dev_err(lcd->dev, "Failed to get regulators: %d\n", ret); - return ret; - } - - lcd->ld = devm_lcd_device_register(lcd->dev, "s6e8ax0", lcd->dev, lcd, - &s6e8ax0_lcd_ops); - if (IS_ERR(lcd->ld)) { - dev_err(lcd->dev, "failed to register lcd ops.\n"); - return PTR_ERR(lcd->ld); - } - - lcd->bd = devm_backlight_device_register(lcd->dev, "s6e8ax0-bl", - lcd->dev, lcd, &s6e8ax0_backlight_ops, NULL); - if (IS_ERR(lcd->bd)) { - dev_err(lcd->dev, "failed to register backlight ops.\n"); - return PTR_ERR(lcd->bd); - } - - lcd->bd->props.max_brightness = MAX_BRIGHTNESS; - lcd->bd->props.brightness = MAX_BRIGHTNESS; - - s6e8ax0_read_id(lcd, mtp_id); - if (mtp_id[0] == 0x00) - dev_err(lcd->dev, "read id failed\n"); - - dev_info(lcd->dev, "Read ID : %x, %x, %x\n", - mtp_id[0], mtp_id[1], mtp_id[2]); - - if (mtp_id[2] == 0x33) - dev_info(lcd->dev, - "ID-3 is 0xff does not support dynamic elvss\n"); - else - dev_info(lcd->dev, - "ID-3 is 0x%x support dynamic elvss\n", mtp_id[2]); - - lcd->acl_enable = 1; - lcd->cur_acl = 0; - - dev_set_drvdata(&dsim_dev->dev, lcd); - - dev_dbg(lcd->dev, "probed s6e8ax0 panel driver.\n"); - - return 0; -} - -static int __maybe_unused s6e8ax0_suspend(struct mipi_dsim_lcd_device *dsim_dev) -{ - struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev); - - s6e8ax0_sleep_in(lcd); - msleep(lcd->ddi_pd->power_off_delay); - s6e8ax0_display_off(lcd); - - s6e8ax0_regulator_disable(lcd); - - return 0; -} - -static int __maybe_unused s6e8ax0_resume(struct mipi_dsim_lcd_device *dsim_dev) -{ - struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev); - - s6e8ax0_sleep_out(lcd); - msleep(lcd->ddi_pd->power_on_delay); - - s6e8ax0_regulator_enable(lcd); - s6e8ax0_set_sequence(dsim_dev); - - return 0; -} - -static struct mipi_dsim_lcd_driver s6e8ax0_dsim_ddi_driver = { - .name = "s6e8ax0", - .id = -1, - - .power_on = s6e8ax0_power_on, - .set_sequence = s6e8ax0_set_sequence, - .probe = s6e8ax0_probe, - .suspend = IS_ENABLED(CONFIG_PM) ? s6e8ax0_suspend : NULL, - .resume = IS_ENABLED(CONFIG_PM) ? s6e8ax0_resume : NULL, -}; - -static int s6e8ax0_init(void) -{ - exynos_mipi_dsi_register_lcd_driver(&s6e8ax0_dsim_ddi_driver); - - return 0; -} - -static void s6e8ax0_exit(void) -{ - return; -} - -module_init(s6e8ax0_init); -module_exit(s6e8ax0_exit); - -MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>"); -MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>"); -MODULE_DESCRIPTION("MIPI-DSI based s6e8ax0 AMOLED LCD Panel Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/video/fbdev/hecubafb.c b/drivers/video/fbdev/hecubafb.c index e4031ef39491..8577195cb533 100644 --- a/drivers/video/fbdev/hecubafb.c +++ b/drivers/video/fbdev/hecubafb.c @@ -47,7 +47,7 @@ #define DPY_W 600 #define DPY_H 800 -static struct fb_fix_screeninfo hecubafb_fix = { +static const struct fb_fix_screeninfo hecubafb_fix = { .id = "hecubafb", .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_MONO01, @@ -58,7 +58,7 @@ static struct fb_fix_screeninfo hecubafb_fix = { .accel = FB_ACCEL_NONE, }; -static struct fb_var_screeninfo hecubafb_var = { +static const struct fb_var_screeninfo hecubafb_var = { .xres = DPY_W, .yres = DPY_H, .xres_virtual = DPY_W, diff --git a/drivers/video/fbdev/hgafb.c b/drivers/video/fbdev/hgafb.c index 15d3ccff2965..463028543173 100644 --- a/drivers/video/fbdev/hgafb.c +++ b/drivers/video/fbdev/hgafb.c @@ -106,7 +106,7 @@ static DEFINE_SPINLOCK(hga_reg_lock); /* Framebuffer driver structures */ -static struct fb_var_screeninfo hga_default_var = { +static const struct fb_var_screeninfo hga_default_var = { .xres = 720, .yres = 348, .xres_virtual = 720, diff --git a/drivers/video/fbdev/i740fb.c b/drivers/video/fbdev/i740fb.c index cf5ccd0f2252..7bc5f6056c77 100644 --- a/drivers/video/fbdev/i740fb.c +++ b/drivers/video/fbdev/i740fb.c @@ -82,7 +82,7 @@ struct i740fb_par { #define DACSPEED24_SD 128 #define DACSPEED32 86 -static struct fb_fix_screeninfo i740fb_fix = { +static const struct fb_fix_screeninfo i740fb_fix = { .id = "i740fb", .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_TRUECOLOR, diff --git a/drivers/video/fbdev/i810/i810_main.c b/drivers/video/fbdev/i810/i810_main.c index 025b882a4826..483ab2592d0c 100644 --- a/drivers/video/fbdev/i810/i810_main.c +++ b/drivers/video/fbdev/i810/i810_main.c @@ -1691,7 +1691,7 @@ static int i810_alloc_agp_mem(struct fb_info *info) if (!(par->i810_gtt.i810_cursor_memory = agp_allocate_memory(bridge, par->cursor_heap.size >> 12, AGP_PHYSICAL_MEMORY))) { - printk("i810fb_alloc_cursormem: can't allocate" + printk("i810fb_alloc_cursormem: can't allocate " "cursor memory\n"); agp_backend_release(bridge); return -ENOMEM; diff --git a/drivers/video/fbdev/intelfb/intelfbdrv.c b/drivers/video/fbdev/intelfb/intelfbdrv.c index bf207444ba0c..ff2a5d2023e1 100644 --- a/drivers/video/fbdev/intelfb/intelfbdrv.c +++ b/drivers/video/fbdev/intelfb/intelfbdrv.c @@ -1301,11 +1301,6 @@ static int intelfb_check_var(struct fb_var_screeninfo *var, break; } - if (v.xoffset < 0) - v.xoffset = 0; - if (v.yoffset < 0) - v.yoffset = 0; - if (v.xoffset > v.xres_virtual - v.xres) v.xoffset = v.xres_virtual - v.xres; if (v.yoffset > v.yres_virtual - v.yres) diff --git a/drivers/video/fbdev/kyro/fbdev.c b/drivers/video/fbdev/kyro/fbdev.c index 5bb01533271e..f77478fb3d14 100644 --- a/drivers/video/fbdev/kyro/fbdev.c +++ b/drivers/video/fbdev/kyro/fbdev.c @@ -44,7 +44,7 @@ static struct fb_fix_screeninfo kyro_fix = { .accel = FB_ACCEL_NONE, }; -static struct fb_var_screeninfo kyro_var = { +static const struct fb_var_screeninfo kyro_var = { /* 640x480, 16bpp @ 60 Hz */ .xres = 640, .yres = 480, diff --git a/drivers/video/fbdev/matrox/matroxfb_Ti3026.c b/drivers/video/fbdev/matrox/matroxfb_Ti3026.c index 195ad7cac1ba..68fa037d8cbc 100644 --- a/drivers/video/fbdev/matrox/matroxfb_Ti3026.c +++ b/drivers/video/fbdev/matrox/matroxfb_Ti3026.c @@ -372,7 +372,7 @@ static int Ti3026_init(struct matrox_fb_info *minfo, struct my_timming *m) DBG(__func__) - memcpy(hw->DACreg, MGADACbpp32, sizeof(hw->DACreg)); + memcpy(hw->DACreg, MGADACbpp32, sizeof(MGADACbpp32)); switch (minfo->fbcon.var.bits_per_pixel) { case 4: hw->DACreg[POS3026_XLATCHCTRL] = TVP3026_XLATCHCTRL_16_1; /* or _8_1, they are same */ hw->DACreg[POS3026_XTRUECOLORCTRL] = TVP3026_XTRUECOLORCTRL_PSEUDOCOLOR; diff --git a/drivers/video/fbdev/matrox/matroxfb_g450.c b/drivers/video/fbdev/matrox/matroxfb_g450.c index cff0546ea6fd..f108ae66fc83 100644 --- a/drivers/video/fbdev/matrox/matroxfb_g450.c +++ b/drivers/video/fbdev/matrox/matroxfb_g450.c @@ -433,7 +433,7 @@ static void cve2_init_TVdata(int norm, struct mavenregs* data, const struct outp 0x00, /* 3E written multiple times */ 0x00, /* 3F not written */ } }; - static struct mavenregs ntscregs = { { + static const struct mavenregs ntscregs = { { 0x21, 0xF0, 0x7C, 0x1F, /* 00: chroma subcarrier */ 0x00, 0x00, /* test */ diff --git a/drivers/video/fbdev/mb862xx/mb862xx-i2c.c b/drivers/video/fbdev/mb862xx/mb862xx-i2c.c index c87e17afb3e2..ba96c44f2761 100644 --- a/drivers/video/fbdev/mb862xx/mb862xx-i2c.c +++ b/drivers/video/fbdev/mb862xx/mb862xx-i2c.c @@ -157,17 +157,10 @@ static struct i2c_adapter mb862xx_i2c_adapter = { int mb862xx_i2c_init(struct mb862xxfb_par *par) { - int ret; - mb862xx_i2c_adapter.algo_data = par; par->adap = &mb862xx_i2c_adapter; - ret = i2c_add_adapter(par->adap); - if (ret < 0) { - dev_err(par->dev, "failed to add %s\n", - mb862xx_i2c_adapter.name); - } - return ret; + return i2c_add_adapter(par->adap); } void mb862xx_i2c_exit(struct mb862xxfb_par *par) diff --git a/drivers/video/fbdev/mx3fb.c b/drivers/video/fbdev/mx3fb.c index f91b1db262b0..8778e01cebac 100644 --- a/drivers/video/fbdev/mx3fb.c +++ b/drivers/video/fbdev/mx3fb.c @@ -845,7 +845,7 @@ static int __set_par(struct fb_info *fbi, bool lock) if (fbi->var.sync & FB_SYNC_SHARP_MODE) mode = IPU_PANEL_SHARP_TFT; - dev_dbg(fbi->device, "pixclock = %ul Hz\n", + dev_dbg(fbi->device, "pixclock = %u Hz\n", (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL)); if (sdc_init_panel(mx3fb, mode, diff --git a/drivers/video/fbdev/mxsfb.c b/drivers/video/fbdev/mxsfb.c index 4e6608ceac09..7846f0e8bbbb 100644 --- a/drivers/video/fbdev/mxsfb.c +++ b/drivers/video/fbdev/mxsfb.c @@ -800,6 +800,7 @@ static int mxsfb_init_fbinfo(struct mxsfb_info *host, struct fb_videomode *vmode) { int ret; + struct device *dev = &host->pdev->dev; struct fb_info *fb_info = &host->fb_info; struct fb_var_screeninfo *var = &fb_info->var; dma_addr_t fb_phys; @@ -825,12 +826,10 @@ static int mxsfb_init_fbinfo(struct mxsfb_info *host, /* Memory allocation for framebuffer */ fb_size = SZ_2M; - fb_virt = alloc_pages_exact(fb_size, GFP_DMA); + fb_virt = dma_alloc_wc(dev, PAGE_ALIGN(fb_size), &fb_phys, GFP_KERNEL); if (!fb_virt) return -ENOMEM; - fb_phys = virt_to_phys(fb_virt); - fb_info->fix.smem_start = fb_phys; fb_info->screen_base = fb_virt; fb_info->screen_size = fb_info->fix.smem_len = fb_size; @@ -843,9 +842,11 @@ static int mxsfb_init_fbinfo(struct mxsfb_info *host, static void mxsfb_free_videomem(struct mxsfb_info *host) { + struct device *dev = &host->pdev->dev; struct fb_info *fb_info = &host->fb_info; - free_pages_exact(fb_info->screen_base, fb_info->fix.smem_len); + dma_free_wc(dev, fb_info->screen_size, fb_info->screen_base, + fb_info->fix.smem_start); } static const struct platform_device_id mxsfb_devtype[] = { diff --git a/drivers/video/fbdev/offb.c b/drivers/video/fbdev/offb.c index fb60a8f0cc94..906c6e75c260 100644 --- a/drivers/video/fbdev/offb.c +++ b/drivers/video/fbdev/offb.c @@ -625,6 +625,21 @@ static void __init offb_init_nodriver(struct device_node *dp, int no_real_node) if (address == OF_BAD_ADDR && addr_prop) address = (u64)addr_prop; if (address != OF_BAD_ADDR) { +#ifdef CONFIG_PCI + const __be32 *vidp, *didp; + u32 vid, did; + struct pci_dev *pdev; + + vidp = of_get_property(dp, "vendor-id", NULL); + didp = of_get_property(dp, "device-id", NULL); + if (vidp && didp) { + vid = be32_to_cpup(vidp); + did = be32_to_cpup(didp); + pdev = pci_get_device(vid, did, NULL); + if (!pdev || pci_enable_device(pdev)) + return; + } +#endif /* kludge for valkyrie */ if (strcmp(dp->name, "valkyrie") == 0) address += 0x1000; diff --git a/drivers/video/fbdev/omap/lcd_mipid.c b/drivers/video/fbdev/omap/lcd_mipid.c index 0e4cee9a8d79..c81f150589e1 100644 --- a/drivers/video/fbdev/omap/lcd_mipid.c +++ b/drivers/video/fbdev/omap/lcd_mipid.c @@ -60,7 +60,6 @@ struct mipid_device { struct mutex mutex; struct lcd_panel panel; - struct workqueue_struct *esd_wq; struct delayed_work esd_work; void (*esd_check)(struct mipid_device *m); }; @@ -390,7 +389,7 @@ static void ls041y3_esd_check(struct mipid_device *md) static void mipid_esd_start_check(struct mipid_device *md) { if (md->esd_check != NULL) - queue_delayed_work(md->esd_wq, &md->esd_work, + schedule_delayed_work(&md->esd_work, MIPID_ESD_CHECK_PERIOD); } @@ -476,11 +475,6 @@ static int mipid_init(struct lcd_panel *panel, struct mipid_device *md = to_mipid_device(panel); md->fbdev = fbdev; - md->esd_wq = create_singlethread_workqueue("mipid_esd"); - if (md->esd_wq == NULL) { - dev_err(&md->spi->dev, "can't create ESD workqueue\n"); - return -ENOMEM; - } INIT_DELAYED_WORK(&md->esd_work, mipid_esd_work); mutex_init(&md->mutex); @@ -500,7 +494,6 @@ static void mipid_cleanup(struct lcd_panel *panel) if (md->enabled) mipid_esd_stop_check(md); - destroy_workqueue(md->esd_wq); } static struct lcd_panel mipid_panel = { diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c index b58012b82b6f..8b810696a42b 100644 --- a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c +++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c @@ -75,8 +75,6 @@ struct panel_drv_data { bool intro_printed; - struct workqueue_struct *workqueue; - bool ulps_enabled; unsigned ulps_timeout; struct delayed_work ulps_work; @@ -232,7 +230,7 @@ static int dsicm_set_update_window(struct panel_drv_data *ddata, static void dsicm_queue_ulps_work(struct panel_drv_data *ddata) { if (ddata->ulps_timeout > 0) - queue_delayed_work(ddata->workqueue, &ddata->ulps_work, + schedule_delayed_work(&ddata->ulps_work, msecs_to_jiffies(ddata->ulps_timeout)); } @@ -1244,11 +1242,6 @@ static int dsicm_probe(struct platform_device *pdev) dev_dbg(dev, "Using GPIO TE\n"); } - ddata->workqueue = create_singlethread_workqueue("dsicm_wq"); - if (ddata->workqueue == NULL) { - dev_err(dev, "can't create workqueue\n"); - return -ENOMEM; - } INIT_DELAYED_WORK(&ddata->ulps_work, dsicm_ulps_work); dsicm_hw_reset(ddata); @@ -1262,7 +1255,7 @@ static int dsicm_probe(struct platform_device *pdev) dev, ddata, &dsicm_bl_ops, &props); if (IS_ERR(bldev)) { r = PTR_ERR(bldev); - goto err_bl; + goto err_reg; } ddata->bldev = bldev; @@ -1285,8 +1278,6 @@ static int dsicm_probe(struct platform_device *pdev) err_sysfs_create: if (bldev != NULL) backlight_device_unregister(bldev); -err_bl: - destroy_workqueue(ddata->workqueue); err_reg: return r; } @@ -1316,7 +1307,6 @@ static int __exit dsicm_remove(struct platform_device *pdev) omap_dss_put_device(ddata->in); dsicm_cancel_ulps_work(ddata); - destroy_workqueue(ddata->workqueue); /* reset, to be sure that the panel is in a valid state */ dsicm_hw_reset(ddata); diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dispc-compat.c b/drivers/video/fbdev/omap2/omapfb/dss/dispc-compat.c index 3691bde4ce0a..a864608c5df1 100644 --- a/drivers/video/fbdev/omap2/omapfb/dss/dispc-compat.c +++ b/drivers/video/fbdev/omap2/omapfb/dss/dispc-compat.c @@ -644,6 +644,7 @@ int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask, { int r; + long time_left; DECLARE_COMPLETION_ONSTACK(completion); r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion, @@ -652,15 +653,15 @@ int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask, if (r) return r; - timeout = wait_for_completion_interruptible_timeout(&completion, + time_left = wait_for_completion_interruptible_timeout(&completion, timeout); omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask); - if (timeout == 0) + if (time_left == 0) return -ETIMEDOUT; - if (timeout == -ERESTARTSYS) + if (time_left == -ERESTARTSYS) return -ERESTARTSYS; return 0; diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dsi.c b/drivers/video/fbdev/omap2/omapfb/dss/dsi.c index 9e4800a4e3d1..30d49f3800b3 100644 --- a/drivers/video/fbdev/omap2/omapfb/dss/dsi.c +++ b/drivers/video/fbdev/omap2/omapfb/dss/dsi.c @@ -1167,7 +1167,6 @@ static int dsi_regulator_init(struct platform_device *dsidev) { struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); struct regulator *vdds_dsi; - int r; if (dsi->vdds_dsi_reg != NULL) return 0; @@ -1180,13 +1179,6 @@ static int dsi_regulator_init(struct platform_device *dsidev) return PTR_ERR(vdds_dsi); } - r = regulator_set_voltage(vdds_dsi, 1800000, 1800000); - if (r) { - devm_regulator_put(vdds_dsi); - DSSERR("can't set the DSI regulator voltage\n"); - return r; - } - dsi->vdds_dsi_reg = vdds_dsi; return 0; @@ -5348,7 +5340,7 @@ static int dsi_bind(struct device *dev, struct device *master, void *data) dsi->phy_base = devm_ioremap(&dsidev->dev, res->start, resource_size(res)); - if (!dsi->proto_base) { + if (!dsi->phy_base) { DSSERR("can't ioremap DSI PHY\n"); return -ENOMEM; } @@ -5368,7 +5360,7 @@ static int dsi_bind(struct device *dev, struct device *master, void *data) dsi->pll_base = devm_ioremap(&dsidev->dev, res->start, resource_size(res)); - if (!dsi->proto_base) { + if (!dsi->pll_base) { DSSERR("can't ioremap DSI PLL\n"); return -ENOMEM; } diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c index 926a6f20dbb2..156a254705ea 100644 --- a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c +++ b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c @@ -100,7 +100,6 @@ static irqreturn_t hdmi_irq_handler(int irq, void *data) static int hdmi_init_regulator(void) { - int r; struct regulator *reg; if (hdmi.vdda_reg != NULL) @@ -114,13 +113,6 @@ static int hdmi_init_regulator(void) return PTR_ERR(reg); } - r = regulator_set_voltage(reg, 1800000, 1800000); - if (r) { - devm_regulator_put(reg); - DSSWARN("can't set the regulator voltage\n"); - return r; - } - hdmi.vdda_reg = reg; return 0; diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi5.c b/drivers/video/fbdev/omap2/omapfb/dss/hdmi5.c index 0ee829a165c3..4da36bcab977 100644 --- a/drivers/video/fbdev/omap2/omapfb/dss/hdmi5.c +++ b/drivers/video/fbdev/omap2/omapfb/dss/hdmi5.c @@ -119,7 +119,6 @@ static irqreturn_t hdmi_irq_handler(int irq, void *data) static int hdmi_init_regulator(void) { - int r; struct regulator *reg; if (hdmi.vdda_reg != NULL) @@ -131,13 +130,6 @@ static int hdmi_init_regulator(void) return PTR_ERR(reg); } - r = regulator_set_voltage(reg, 1800000, 1800000); - if (r) { - devm_regulator_put(reg); - DSSWARN("can't set the regulator voltage\n"); - return r; - } - hdmi.vdda_reg = reg; return 0; diff --git a/drivers/video/fbdev/pm2fb.c b/drivers/video/fbdev/pm2fb.c index aa8d28880912..1a4070f719c2 100644 --- a/drivers/video/fbdev/pm2fb.c +++ b/drivers/video/fbdev/pm2fb.c @@ -113,7 +113,7 @@ static struct fb_fix_screeninfo pm2fb_fix = { /* * Default video mode. In case the modedb doesn't work. */ -static struct fb_var_screeninfo pm2fb_var = { +static const struct fb_var_screeninfo pm2fb_var = { /* "640x480, 8 bpp @ 60 Hz */ .xres = 640, .yres = 480, diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c index 2c0487f4f805..ef73f14d7ba0 100644 --- a/drivers/video/fbdev/pxafb.c +++ b/drivers/video/fbdev/pxafb.c @@ -2125,7 +2125,7 @@ static int of_get_pxafb_display(struct device *dev, struct device_node *disp, timings = of_get_display_timings(disp); if (!timings) - goto out; + return -EINVAL; ret = -ENOMEM; info->modes = kmalloc_array(timings->num_timings, @@ -2186,6 +2186,7 @@ static int of_get_pxafb_mode_info(struct device *dev, ret = of_property_read_u32(np, "bus-width", &bus_width); if (ret) { dev_err(dev, "no bus-width specified: %d\n", ret); + of_node_put(np); return ret; } diff --git a/drivers/video/fbdev/s1d13xxxfb.c b/drivers/video/fbdev/s1d13xxxfb.c index 96aa46dc696c..5d6179ef0298 100644 --- a/drivers/video/fbdev/s1d13xxxfb.c +++ b/drivers/video/fbdev/s1d13xxxfb.c @@ -83,7 +83,7 @@ static const char *s1d13xxxfb_prod_names[] = { /* * here we define the default struct fb_fix_screeninfo */ -static struct fb_fix_screeninfo s1d13xxxfb_fix = { +static const struct fb_fix_screeninfo s1d13xxxfb_fix = { .id = S1D_FBID, .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_PSEUDOCOLOR, @@ -929,7 +929,7 @@ static int s1d13xxxfb_suspend(struct platform_device *dev, pm_message_t state) s1dfb->disp_save = kmalloc(info->fix.smem_len, GFP_KERNEL); if (!s1dfb->disp_save) { - printk(KERN_ERR PFX "no memory to save screen"); + printk(KERN_ERR PFX "no memory to save screen\n"); return -ENOMEM; } diff --git a/drivers/video/fbdev/s3c2410fb.c b/drivers/video/fbdev/s3c2410fb.c index 0dd86be36afb..a67e4567e656 100644 --- a/drivers/video/fbdev/s3c2410fb.c +++ b/drivers/video/fbdev/s3c2410fb.c @@ -767,7 +767,7 @@ static irqreturn_t s3c2410fb_irq(int irq, void *dev_id) return IRQ_HANDLED; } -#ifdef CONFIG_CPU_FREQ +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ static int s3c2410fb_cpufreq_transition(struct notifier_block *nb, unsigned long val, void *data) diff --git a/drivers/video/fbdev/s3c2410fb.h b/drivers/video/fbdev/s3c2410fb.h index 47a17bd23011..cdd11e2f8859 100644 --- a/drivers/video/fbdev/s3c2410fb.h +++ b/drivers/video/fbdev/s3c2410fb.h @@ -32,7 +32,7 @@ struct s3c2410fb_info { unsigned long clk_rate; unsigned int palette_ready; -#ifdef CONFIG_CPU_FREQ +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ struct notifier_block freq_transition; #endif diff --git a/drivers/video/fbdev/savage/savagefb_driver.c b/drivers/video/fbdev/savage/savagefb_driver.c index 6c77ab09b0b2..c30a91c1137c 100644 --- a/drivers/video/fbdev/savage/savagefb_driver.c +++ b/drivers/video/fbdev/savage/savagefb_driver.c @@ -1660,7 +1660,7 @@ static struct fb_ops savagefb_ops = { /* --------------------------------------------------------------------- */ -static struct fb_var_screeninfo savagefb_var800x600x8 = { +static const struct fb_var_screeninfo savagefb_var800x600x8 = { .accel_flags = FB_ACCELF_TEXT, .xres = 800, .yres = 600, diff --git a/drivers/video/fbdev/simplefb.c b/drivers/video/fbdev/simplefb.c index e9cf19977285..61f799a515dc 100644 --- a/drivers/video/fbdev/simplefb.c +++ b/drivers/video/fbdev/simplefb.c @@ -33,14 +33,14 @@ #include <linux/parser.h> #include <linux/regulator/consumer.h> -static struct fb_fix_screeninfo simplefb_fix = { +static const struct fb_fix_screeninfo simplefb_fix = { .id = "simple", .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_TRUECOLOR, .accel = FB_ACCEL_NONE, }; -static struct fb_var_screeninfo simplefb_var = { +static const struct fb_var_screeninfo simplefb_var = { .height = -1, .width = -1, .activate = FB_ACTIVATE_NOW, @@ -74,8 +74,14 @@ static int simplefb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, return 0; } +struct simplefb_par; +static void simplefb_clocks_destroy(struct simplefb_par *par); +static void simplefb_regulators_destroy(struct simplefb_par *par); + static void simplefb_destroy(struct fb_info *info) { + simplefb_regulators_destroy(info->par); + simplefb_clocks_destroy(info->par); if (info->screen_base) iounmap(info->screen_base); } @@ -487,11 +493,8 @@ error_fb_release: static int simplefb_remove(struct platform_device *pdev) { struct fb_info *info = platform_get_drvdata(pdev); - struct simplefb_par *par = info->par; unregister_framebuffer(info); - simplefb_regulators_destroy(par); - simplefb_clocks_destroy(par); framebuffer_release(info); return 0; diff --git a/drivers/video/fbdev/sm712fb.c b/drivers/video/fbdev/sm712fb.c index 86ae1d4556fc..73cb4ffff3c5 100644 --- a/drivers/video/fbdev/sm712fb.c +++ b/drivers/video/fbdev/sm712fb.c @@ -56,7 +56,7 @@ struct smtcfb_info { void __iomem *smtc_regbaseaddress; /* Memory Map IO starting address */ -static struct fb_var_screeninfo smtcfb_var = { +static const struct fb_var_screeninfo smtcfb_var = { .xres = 1024, .yres = 600, .xres_virtual = 1024, diff --git a/drivers/video/fbdev/smscufx.c b/drivers/video/fbdev/smscufx.c index 9279e5f6696e..ec2e7e353685 100644 --- a/drivers/video/fbdev/smscufx.c +++ b/drivers/video/fbdev/smscufx.c @@ -1761,10 +1761,8 @@ error: static void ufx_usb_disconnect(struct usb_interface *interface) { struct ufx_data *dev; - struct fb_info *info; dev = usb_get_intfdata(interface); - info = dev->info; pr_debug("USB disconnect starting\n"); diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c index a9c45c89b15e..2925d5ce8d3e 100644 --- a/drivers/video/fbdev/ssd1307fb.c +++ b/drivers/video/fbdev/ssd1307fb.c @@ -64,7 +64,7 @@ struct ssd1307fb_par { u32 contrast; u32 dclk_div; u32 dclk_frq; - struct ssd1307fb_deviceinfo *device_info; + const struct ssd1307fb_deviceinfo *device_info; struct i2c_client *client; u32 height; struct fb_info *info; @@ -84,7 +84,7 @@ struct ssd1307fb_array { u8 data[0]; }; -static struct fb_fix_screeninfo ssd1307fb_fix = { +static const struct fb_fix_screeninfo ssd1307fb_fix = { .id = "Solomon SSD1307", .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_MONO10, @@ -94,7 +94,7 @@ static struct fb_fix_screeninfo ssd1307fb_fix = { .accel = FB_ACCEL_NONE, }; -static struct fb_var_screeninfo ssd1307fb_var = { +static const struct fb_var_screeninfo ssd1307fb_var = { .bits_per_pixel = 1, }; @@ -559,8 +559,7 @@ static int ssd1307fb_probe(struct i2c_client *client, par->info = info; par->client = client; - par->device_info = (struct ssd1307fb_deviceinfo *)of_match_device( - ssd1307fb_of_match, &client->dev)->data; + par->device_info = of_device_get_match_data(&client->dev); par->reset = of_get_named_gpio(client->dev.of_node, "reset-gpios", 0); diff --git a/drivers/video/fbdev/tdfxfb.c b/drivers/video/fbdev/tdfxfb.c index 621fa441a6db..d5fa313806fe 100644 --- a/drivers/video/fbdev/tdfxfb.c +++ b/drivers/video/fbdev/tdfxfb.c @@ -82,7 +82,7 @@ #define VOODOO3_MAX_PIXCLOCK 300000 #define VOODOO5_MAX_PIXCLOCK 350000 -static struct fb_fix_screeninfo tdfx_fix = { +static const struct fb_fix_screeninfo tdfx_fix = { .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_PSEUDOCOLOR, .ypanstep = 1, @@ -90,7 +90,7 @@ static struct fb_fix_screeninfo tdfx_fix = { .accel = FB_ACCEL_3DFX_BANSHEE }; -static struct fb_var_screeninfo tdfx_var = { +static const struct fb_var_screeninfo tdfx_var = { /* "640x480, 8 bpp @ 60 Hz */ .xres = 640, .yres = 480, diff --git a/drivers/video/fbdev/uvesafb.c b/drivers/video/fbdev/uvesafb.c index 178ae93b7ebd..98af9e02959b 100644 --- a/drivers/video/fbdev/uvesafb.c +++ b/drivers/video/fbdev/uvesafb.c @@ -33,7 +33,7 @@ static struct cb_id uvesafb_cn_id = { static char v86d_path[PATH_MAX] = "/sbin/v86d"; static char v86d_started; /* has v86d been started by uvesafb? */ -static struct fb_fix_screeninfo uvesafb_fix = { +static const struct fb_fix_screeninfo uvesafb_fix = { .id = "VESA VGA", .type = FB_TYPE_PACKED_PIXELS, .accel = FB_ACCEL_NONE, diff --git a/drivers/video/fbdev/vfb.c b/drivers/video/fbdev/vfb.c index b9c2f81fb6b9..da653a080394 100644 --- a/drivers/video/fbdev/vfb.c +++ b/drivers/video/fbdev/vfb.c @@ -35,76 +35,23 @@ static void *videomemory; static u_long videomemorysize = VIDEOMEMSIZE; module_param(videomemorysize, ulong, 0); +MODULE_PARM_DESC(videomemorysize, "RAM available to frame buffer (in bytes)"); -/********************************************************************** - * - * Memory management - * - **********************************************************************/ -static void *rvmalloc(unsigned long size) -{ - void *mem; - unsigned long adr; - - size = PAGE_ALIGN(size); - mem = vmalloc_32(size); - if (!mem) - return NULL; - - /* - * VFB must clear memory to prevent kernel info - * leakage into userspace - * VGA-based drivers MUST NOT clear memory if - * they want to be able to take over vgacon - */ - - memset(mem, 0, size); - adr = (unsigned long) mem; - while (size > 0) { - SetPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - - return mem; -} - -static void rvfree(void *mem, unsigned long size) -{ - unsigned long adr; - - if (!mem) - return; - - adr = (unsigned long) mem; - while ((long) size > 0) { - ClearPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - vfree(mem); -} +static char *mode_option = NULL; +module_param(mode_option, charp, 0); +MODULE_PARM_DESC(mode_option, "Preferred video mode (e.g. 640x480-8@60)"); -static struct fb_var_screeninfo vfb_default = { +static const struct fb_videomode vfb_default = { .xres = 640, .yres = 480, - .xres_virtual = 640, - .yres_virtual = 480, - .bits_per_pixel = 8, - .red = { 0, 8, 0 }, - .green = { 0, 8, 0 }, - .blue = { 0, 8, 0 }, - .activate = FB_ACTIVATE_TEST, - .height = -1, - .width = -1, - .pixclock = 20000, - .left_margin = 64, - .right_margin = 64, - .upper_margin = 32, - .lower_margin = 32, - .hsync_len = 64, - .vsync_len = 2, - .vmode = FB_VMODE_NONINTERLACED, + .pixclock = 20000, + .left_margin = 64, + .right_margin = 64, + .upper_margin = 32, + .lower_margin = 32, + .hsync_len = 64, + .vsync_len = 2, + .vmode = FB_VMODE_NONINTERLACED, }; static struct fb_fix_screeninfo vfb_fix = { @@ -119,6 +66,7 @@ static struct fb_fix_screeninfo vfb_fix = { static bool vfb_enable __initdata = 0; /* disabled by default */ module_param(vfb_enable, bool, 0); +MODULE_PARM_DESC(vfb_enable, "Enable Virtual FB driver"); static int vfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info); @@ -421,35 +369,7 @@ static int vfb_pan_display(struct fb_var_screeninfo *var, static int vfb_mmap(struct fb_info *info, struct vm_area_struct *vma) { - unsigned long start = vma->vm_start; - unsigned long size = vma->vm_end - vma->vm_start; - unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; - unsigned long page, pos; - - if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) - return -EINVAL; - if (size > info->fix.smem_len) - return -EINVAL; - if (offset > info->fix.smem_len - size) - return -EINVAL; - - pos = (unsigned long)info->fix.smem_start + offset; - - while (size > 0) { - page = vmalloc_to_pfn((void *)pos); - if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) { - return -EAGAIN; - } - start += PAGE_SIZE; - pos += PAGE_SIZE; - if (size > PAGE_SIZE) - size -= PAGE_SIZE; - else - size = 0; - } - - return 0; - + return remap_vmalloc_range(vma, (void *)info->fix.smem_start, vma->vm_pgoff); } #ifndef MODULE @@ -477,6 +397,8 @@ static int __init vfb_setup(char *options) /* Test disable for backwards compatibility */ if (!strcmp(this_opt, "disable")) vfb_enable = 0; + else + mode_option = this_opt; } return 1; } @@ -489,12 +411,13 @@ static int __init vfb_setup(char *options) static int vfb_probe(struct platform_device *dev) { struct fb_info *info; + unsigned int size = PAGE_ALIGN(videomemorysize); int retval = -ENOMEM; /* * For real video cards we use ioremap. */ - if (!(videomemory = rvmalloc(videomemorysize))) + if (!(videomemory = vmalloc_32_user(size))) return retval; info = framebuffer_alloc(sizeof(u32) * 256, &dev->dev); @@ -504,11 +427,13 @@ static int vfb_probe(struct platform_device *dev) info->screen_base = (char __iomem *)videomemory; info->fbops = &vfb_ops; - retval = fb_find_mode(&info->var, info, NULL, - NULL, 0, NULL, 8); + if (!fb_find_mode(&info->var, info, mode_option, + NULL, 0, &vfb_default, 8)){ + fb_err(info, "Unable to find usable video mode.\n"); + retval = -EINVAL; + goto err1; + } - if (!retval || (retval == 4)) - info->var = vfb_default; vfb_fix.smem_start = (unsigned long) videomemory; vfb_fix.smem_len = videomemorysize; info->fix = vfb_fix; @@ -533,7 +458,7 @@ err2: err1: framebuffer_release(info); err: - rvfree(videomemory, videomemorysize); + vfree(videomemory); return retval; } @@ -543,7 +468,7 @@ static int vfb_remove(struct platform_device *dev) if (info) { unregister_framebuffer(info); - rvfree(videomemory, videomemorysize); + vfree(videomemory); fb_dealloc_cmap(&info->cmap); framebuffer_release(info); } diff --git a/drivers/video/fbdev/vga16fb.c b/drivers/video/fbdev/vga16fb.c index 283d335a759f..5f0690c8fc93 100644 --- a/drivers/video/fbdev/vga16fb.c +++ b/drivers/video/fbdev/vga16fb.c @@ -85,7 +85,7 @@ static struct fb_var_screeninfo vga16fb_defined = { }; /* name should not depend on EGA/VGA */ -static struct fb_fix_screeninfo vga16fb_fix = { +static const struct fb_fix_screeninfo vga16fb_fix = { .id = "VGA16 VGA", .smem_start = VGA_FB_PHYS, .smem_len = VGA_FB_PHYS_LEN, diff --git a/include/linux/amba/clcd.h b/include/linux/amba/clcd.h index e82e3ee2c54a..1035879b322c 100644 --- a/include/linux/amba/clcd.h +++ b/include/linux/amba/clcd.h @@ -67,6 +67,17 @@ #define CNTL_LDMAFIFOTIME (1 << 15) #define CNTL_WATERMARK (1 << 16) +/* ST Microelectronics variant bits */ +#define CNTL_ST_1XBPP_444 0x0 +#define CNTL_ST_1XBPP_5551 (1 << 17) +#define CNTL_ST_1XBPP_565 (1 << 18) +#define CNTL_ST_CDWID_12 0x0 +#define CNTL_ST_CDWID_16 (1 << 19) +#define CNTL_ST_CDWID_18 (1 << 20) +#define CNTL_ST_CDWID_24 ((1 << 19)|(1 << 20)) +#define CNTL_ST_CEAEN (1 << 21) +#define CNTL_ST_LCDBPP24_PACKED (6 << 1) + enum { /* individual formats */ CLCD_CAP_RGB444 = (1 << 0), @@ -93,6 +104,8 @@ enum { CLCD_CAP_ALL = CLCD_CAP_BGR | CLCD_CAP_RGB, }; +struct backlight_device; + struct clcd_panel { struct fb_videomode mode; signed short width; /* width in mm */ @@ -105,6 +118,13 @@ struct clcd_panel { fixedtimings:1, grayscale:1; unsigned int connector; + struct backlight_device *backlight; + /* + * If the B/R lines are switched between the CLCD + * and the panel we need to know this and not try to + * compensate with the BGR bit in the control register. + */ + bool bgr_connection; }; struct clcd_regs { @@ -170,11 +190,38 @@ struct clcd_board { struct amba_device; struct clk; +/** + * struct clcd_vendor_data - holds hardware (IP-block) vendor-specific + * variant information + * + * @clock_timregs: the CLCD needs to be clocked when accessing the + * timer registers, or the hardware will hang. + * @packed_24_bit_pixels: this variant supports 24bit packed pixel data, + * so that RGB accesses 3 bytes at a time, not just on even 32bit + * boundaries, packing the pixel data in memory. ST Microelectronics + * have this. + * @st_bitmux_control: ST Microelectronics have implemented output + * bit line multiplexing into the CLCD control register. This indicates + * that we need to use this. + * @init_board: custom board init function for this variant + * @init_panel: custom panel init function for this variant + */ +struct clcd_vendor_data { + bool clock_timregs; + bool packed_24_bit_pixels; + bool st_bitmux_control; + int (*init_board)(struct amba_device *adev, + struct clcd_board *board); + int (*init_panel)(struct clcd_fb *fb, + struct device_node *panel); +}; + /* this data structure describes each frame buffer device we find */ struct clcd_fb { struct fb_info fb; struct amba_device *dev; struct clk *clk; + struct clcd_vendor_data *vendor; struct clcd_panel *panel; struct clcd_board *board; void *board_data; @@ -231,16 +278,22 @@ static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs) if (var->grayscale) val |= CNTL_LCDBW; - if (fb->panel->caps && fb->board->caps && - var->bits_per_pixel >= 16) { + if (fb->panel->caps && fb->board->caps && var->bits_per_pixel >= 16) { /* * if board and panel supply capabilities, we can support - * changing BGR/RGB depending on supplied parameters + * changing BGR/RGB depending on supplied parameters. Here + * we switch to what the framebuffer is providing if need + * be, so if the framebuffer is BGR but the display connection + * is RGB (first case) we switch it around. Vice versa mutatis + * mutandis if the framebuffer is RGB but the display connection + * is BGR, we flip it around. */ if (var->red.offset == 0) val &= ~CNTL_BGR; else val |= CNTL_BGR; + if (fb->panel->bgr_connection) + val ^= CNTL_BGR; } switch (var->bits_per_pixel) { @@ -270,6 +323,10 @@ static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs) else val |= CNTL_LCDBPP16_444; break; + case 24: + /* Modified variant supporting 24 bit packed pixels */ + val |= CNTL_ST_LCDBPP24_PACKED; + break; case 32: val |= CNTL_LCDBPP24; break; diff --git a/include/video/exynos_mipi_dsim.h b/include/video/exynos_mipi_dsim.h deleted file mode 100644 index 6a578f8a1b3e..000000000000 --- a/include/video/exynos_mipi_dsim.h +++ /dev/null @@ -1,358 +0,0 @@ -/* include/video/exynos_mipi_dsim.h - * - * Platform data header for Samsung SoC MIPI-DSIM. - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd - * - * InKi Dae <inki.dae@samsung.com> - * Donghwa Lee <dh09.lee@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef _EXYNOS_MIPI_DSIM_H -#define _EXYNOS_MIPI_DSIM_H - -#include <linux/device.h> -#include <linux/fb.h> - -#define PANEL_NAME_SIZE (32) - -/* - * Enumerate display interface type. - * - * DSIM_COMMAND means cpu interface and rgb interface for DSIM_VIDEO. - * - * P.S. MIPI DSI Master has two display controller intefaces, RGB Interface - * for main display and CPU Interface(same as I80 Interface) for main - * and sub display. - */ -enum mipi_dsim_interface_type { - DSIM_COMMAND, - DSIM_VIDEO -}; - -enum mipi_dsim_virtual_ch_no { - DSIM_VIRTUAL_CH_0, - DSIM_VIRTUAL_CH_1, - DSIM_VIRTUAL_CH_2, - DSIM_VIRTUAL_CH_3 -}; - -enum mipi_dsim_burst_mode_type { - DSIM_NON_BURST_SYNC_EVENT, - DSIM_BURST_SYNC_EVENT, - DSIM_NON_BURST_SYNC_PULSE, - DSIM_BURST, - DSIM_NON_VIDEO_MODE -}; - -enum mipi_dsim_no_of_data_lane { - DSIM_DATA_LANE_1, - DSIM_DATA_LANE_2, - DSIM_DATA_LANE_3, - DSIM_DATA_LANE_4 -}; - -enum mipi_dsim_byte_clk_src { - DSIM_PLL_OUT_DIV8, - DSIM_EXT_CLK_DIV8, - DSIM_EXT_CLK_BYPASS -}; - -enum mipi_dsim_pixel_format { - DSIM_CMD_3BPP, - DSIM_CMD_8BPP, - DSIM_CMD_12BPP, - DSIM_CMD_16BPP, - DSIM_VID_16BPP_565, - DSIM_VID_18BPP_666PACKED, - DSIM_18BPP_666LOOSELYPACKED, - DSIM_24BPP_888 -}; - -/* - * struct mipi_dsim_config - interface for configuring mipi-dsi controller. - * - * @auto_flush: enable or disable Auto flush of MD FIFO using VSYNC pulse. - * @eot_disable: enable or disable EoT packet in HS mode. - * @auto_vertical_cnt: specifies auto vertical count mode. - * in Video mode, the vertical line transition uses line counter - * configured by VSA, VBP, and Vertical resolution. - * If this bit is set to '1', the line counter does not use VSA and VBP - * registers.(in command mode, this variable is ignored) - * @hse: set horizontal sync event mode. - * In VSYNC pulse and Vporch area, MIPI DSI master transfers only HSYNC - * start packet to MIPI DSI slave at MIPI DSI spec1.1r02. - * this bit transfers HSYNC end packet in VSYNC pulse and Vporch area - * (in mommand mode, this variable is ignored) - * @hfp: specifies HFP disable mode. - * if this variable is set, DSI master ignores HFP area in VIDEO mode. - * (in command mode, this variable is ignored) - * @hbp: specifies HBP disable mode. - * if this variable is set, DSI master ignores HBP area in VIDEO mode. - * (in command mode, this variable is ignored) - * @hsa: specifies HSA disable mode. - * if this variable is set, DSI master ignores HSA area in VIDEO mode. - * (in command mode, this variable is ignored) - * @cma_allow: specifies the number of horizontal lines, where command packet - * transmission is allowed after Stable VFP period. - * @e_interface: specifies interface to be used.(CPU or RGB interface) - * @e_virtual_ch: specifies virtual channel number that main or - * sub diaplsy uses. - * @e_pixel_format: specifies pixel stream format for main or sub display. - * @e_burst_mode: selects Burst mode in Video mode. - * in Non-burst mode, RGB data area is filled with RGB data and NULL - * packets, according to input bandwidth of RGB interface. - * In Burst mode, RGB data area is filled with RGB data only. - * @e_no_data_lane: specifies data lane count to be used by Master. - * @e_byte_clk: select byte clock source. (it must be DSIM_PLL_OUT_DIV8) - * DSIM_EXT_CLK_DIV8 and DSIM_EXT_CLK_BYPASSS are not supported. - * @pll_stable_time: specifies the PLL Timer for stability of the ganerated - * clock(System clock cycle base) - * if the timer value goes to 0x00000000, the clock stable bit of status - * and interrupt register is set. - * @esc_clk: specifies escape clock frequency for getting the escape clock - * prescaler value. - * @stop_holding_cnt: specifies the interval value between transmitting - * read packet(or write "set_tear_on" command) and BTA request. - * after transmitting read packet or write "set_tear_on" command, - * BTA requests to D-PHY automatically. this counter value specifies - * the interval between them. - * @bta_timeout: specifies the timer for BTA. - * this register specifies time out from BTA request to change - * the direction with respect to Tx escape clock. - * @rx_timeout: specifies the timer for LP Rx mode timeout. - * this register specifies time out on how long RxValid deasserts, - * after RxLpdt asserts with respect to Tx escape clock. - * - RxValid specifies Rx data valid indicator. - * - RxLpdt specifies an indicator that D-PHY is under RxLpdt mode. - * - RxValid and RxLpdt specifies signal from D-PHY. - */ -struct mipi_dsim_config { - unsigned char auto_flush; - unsigned char eot_disable; - - unsigned char auto_vertical_cnt; - unsigned char hse; - unsigned char hfp; - unsigned char hbp; - unsigned char hsa; - unsigned char cmd_allow; - - enum mipi_dsim_interface_type e_interface; - enum mipi_dsim_virtual_ch_no e_virtual_ch; - enum mipi_dsim_pixel_format e_pixel_format; - enum mipi_dsim_burst_mode_type e_burst_mode; - enum mipi_dsim_no_of_data_lane e_no_data_lane; - enum mipi_dsim_byte_clk_src e_byte_clk; - - /* - * =========================================== - * | P | M | S | MHz | - * ------------------------------------------- - * | 3 | 100 | 3 | 100 | - * | 3 | 100 | 2 | 200 | - * | 3 | 63 | 1 | 252 | - * | 4 | 100 | 1 | 300 | - * | 4 | 110 | 1 | 330 | - * | 12 | 350 | 1 | 350 | - * | 3 | 100 | 1 | 400 | - * | 4 | 150 | 1 | 450 | - * | 6 | 118 | 1 | 472 | - * | 3 | 120 | 1 | 480 | - * | 12 | 250 | 0 | 500 | - * | 4 | 100 | 0 | 600 | - * | 3 | 81 | 0 | 648 | - * | 3 | 88 | 0 | 704 | - * | 3 | 90 | 0 | 720 | - * | 3 | 100 | 0 | 800 | - * | 12 | 425 | 0 | 850 | - * | 4 | 150 | 0 | 900 | - * | 12 | 475 | 0 | 950 | - * | 6 | 250 | 0 | 1000 | - * ------------------------------------------- - */ - - /* - * pms could be calculated as the following. - * M * 24 / P * 2 ^ S = MHz - */ - unsigned char p; - unsigned short m; - unsigned char s; - - unsigned int pll_stable_time; - unsigned long esc_clk; - - unsigned short stop_holding_cnt; - unsigned char bta_timeout; - unsigned short rx_timeout; -}; - -/* - * struct mipi_dsim_device - global interface for mipi-dsi driver. - * - * @dev: driver model representation of the device. - * @id: unique device id. - * @clock: pointer to MIPI-DSI clock of clock framework. - * @irq: interrupt number to MIPI-DSI controller. - * @reg_base: base address to memory mapped SRF of MIPI-DSI controller. - * (virtual address) - * @lock: the mutex protecting this data structure. - * @dsim_info: infomation for configuring mipi-dsi controller. - * @master_ops: callbacks to mipi-dsi operations. - * @dsim_lcd_dev: pointer to activated ddi device. - * (it would be registered by mipi-dsi driver.) - * @dsim_lcd_drv: pointer to activated_ddi driver. - * (it would be registered by mipi-dsi driver.) - * @lcd_info: pointer to mipi_lcd_info structure. - * @state: specifies status of MIPI-DSI controller. - * the status could be RESET, INIT, STOP, HSCLKEN and ULPS. - * @data_lane: specifiec enabled data lane number. - * this variable would be set by driver according to e_no_data_lane - * automatically. - * @e_clk_src: select byte clock source. - * @pd: pointer to MIPI-DSI driver platform data. - * @phy: pointer to the MIPI-DSI PHY - */ -struct mipi_dsim_device { - struct device *dev; - int id; - struct clk *clock; - unsigned int irq; - void __iomem *reg_base; - struct mutex lock; - - struct mipi_dsim_config *dsim_config; - struct mipi_dsim_master_ops *master_ops; - struct mipi_dsim_lcd_device *dsim_lcd_dev; - struct mipi_dsim_lcd_driver *dsim_lcd_drv; - - unsigned int state; - unsigned int data_lane; - unsigned int e_clk_src; - bool suspended; - - struct mipi_dsim_platform_data *pd; - struct phy *phy; -}; - -/* - * struct mipi_dsim_platform_data - interface to platform data - * for mipi-dsi driver. - * - * @lcd_panel_name: specifies lcd panel name registered to mipi-dsi driver. - * lcd panel driver searched would be actived. - * @dsim_config: pointer of structure for configuring mipi-dsi controller. - * @enabled: indicate whether mipi controller got enabled or not. - * @lcd_panel_info: pointer for lcd panel specific structure. - * this structure specifies width, height, timing and polarity and so on. - */ -struct mipi_dsim_platform_data { - char lcd_panel_name[PANEL_NAME_SIZE]; - - struct mipi_dsim_config *dsim_config; - unsigned int enabled; - void *lcd_panel_info; -}; - -/* - * struct mipi_dsim_master_ops - callbacks to mipi-dsi operations. - * - * @cmd_write: transfer command to lcd panel at LP mode. - * @cmd_read: read command from rx register. - * @get_dsim_frame_done: get the status that all screen data have been - * transferred to mipi-dsi. - * @clear_dsim_frame_done: clear frame done status. - * @get_fb_frame_done: get frame done status of display controller. - * @trigger: trigger display controller. - * - this one would be used only in case of CPU mode. - * @set_early_blank_mode: set framebuffer blank mode. - * - this callback should be called prior to fb_blank() by a client driver - * only if needing. - * @set_blank_mode: set framebuffer blank mode. - * - this callback should be called after fb_blank() by a client driver - * only if needing. - */ - -struct mipi_dsim_master_ops { - int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id, - const unsigned char *data0, unsigned int data1); - int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id, - unsigned int data0, unsigned int req_size, u8 *rx_buf); - int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim); - int (*clear_dsim_frame_done)(struct mipi_dsim_device *dsim); - - int (*get_fb_frame_done)(struct fb_info *info); - void (*trigger)(struct fb_info *info); - int (*set_early_blank_mode)(struct mipi_dsim_device *dsim, int power); - int (*set_blank_mode)(struct mipi_dsim_device *dsim, int power); -}; - -/* - * device structure for mipi-dsi based lcd panel. - * - * @name: name of the device to use with this device, or an - * alias for that name. - * @dev: driver model representation of the device. - * @id: id of device to be registered. - * @bus_id: bus id for identifing connected bus - * and this bus id should be same as id of mipi_dsim_device. - * @irq: irq number for signaling when framebuffer transfer of - * lcd panel module is completed. - * this irq would be used only for MIPI-DSI based CPU mode lcd panel. - * @master: pointer to mipi-dsi master device object. - * @platform_data: lcd panel specific platform data. - */ -struct mipi_dsim_lcd_device { - char *name; - struct device dev; - int id; - int bus_id; - int irq; - int panel_reverse; - - struct mipi_dsim_device *master; - void *platform_data; -}; - -/* - * driver structure for mipi-dsi based lcd panel. - * - * this structure should be registered by lcd panel driver. - * mipi-dsi driver seeks lcd panel registered through name field - * and calls these callback functions in appropriate time. - * - * @name: name of the driver to use with this device, or an - * alias for that name. - * @id: id of driver to be registered. - * this id would be used for finding device object registered. - */ -struct mipi_dsim_lcd_driver { - char *name; - int id; - - void (*power_on)(struct mipi_dsim_lcd_device *dsim_dev, int enable); - void (*set_sequence)(struct mipi_dsim_lcd_device *dsim_dev); - int (*probe)(struct mipi_dsim_lcd_device *dsim_dev); - int (*remove)(struct mipi_dsim_lcd_device *dsim_dev); - void (*shutdown)(struct mipi_dsim_lcd_device *dsim_dev); - int (*suspend)(struct mipi_dsim_lcd_device *dsim_dev); - int (*resume)(struct mipi_dsim_lcd_device *dsim_dev); -}; - -/* - * register mipi_dsim_lcd_device to mipi-dsi master. - */ -int exynos_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device - *lcd_dev); -/** - * register mipi_dsim_lcd_driver object defined by lcd panel driver - * to mipi-dsi driver. - */ -int exynos_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver - *lcd_drv); -#endif /* _EXYNOS_MIPI_DSIM_H */ |