diff options
87 files changed, 8079 insertions, 521 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 8a5122ab19b0..fcc6f6c10803 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -25,3 +25,6 @@ Board compatible values: - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb) - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb) - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb) + - "hardkernel,odroid-c2" (Meson gxbb) + - "amlogic,p200" (Meson gxbb) + - "amlogic,p201" (Meson gxbb) diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index 752a685d926f..dbbc0952021c 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -135,6 +135,10 @@ LS1043A ARMv8 based RDB Board Required root node properties: - compatible = "fsl,ls1043a-rdb", "fsl,ls1043a"; +LS1043A ARMv8 based QDS Board +Required root node properties: + - compatible = "fsl,ls1043a-qds", "fsl,ls1043a"; + LS2080A ARMv8 based Simulator model Required root node properties: - compatible = "fsl,ls2080a-simu", "fsl,ls2080a"; diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt index e3ccab114006..83fe816ae050 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -1,29 +1,33 @@ Hisilicon Platforms Device Tree Bindings ---------------------------------------------------- -Hi6220 SoC -Required root node properties: - - compatible = "hisilicon,hi6220"; - Hi4511 Board Required root node properties: - compatible = "hisilicon,hi3620-hi4511"; -HiP04 D01 Board +Hi6220 SoC Required root node properties: - - compatible = "hisilicon,hip04-d01"; + - compatible = "hisilicon,hi6220"; + +HiKey Board +Required root node properties: + - compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220"; HiP01 ca9x2 Board Required root node properties: - compatible = "hisilicon,hip01-ca9x2"; -HiKey Board +HiP04 D01 Board Required root node properties: - - compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220"; + - compatible = "hisilicon,hip04-d01"; HiP05 D02 Board Required root node properties: - compatible = "hisilicon,hip05-d02"; +HiP06 D03 Board +Required root node properties: + - compatible = "hisilicon,hip06-d03"; + Hisilicon system controller Required properties: diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index 585496f203df..715d960d5eea 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -39,6 +39,10 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "netxeon,r89", "rockchip,rk3288"; +- GeekBuying GeekBox: + Required root node properties: + - compatible = "geekbuying,geekbox", "rockchip,rk3368"; + - Google Brain (dev-board): Required root node properties: - compatible = "google,veyron-brain-rev0", "google,veyron-brain", @@ -101,4 +105,8 @@ Rockchip platforms device tree bindings - Rockchip RK3228 Evaluation board: Required root node properties: - - compatible = "rockchip,rk3228-evb", "rockchip,rk3228"; + - compatible = "rockchip,rk3228-evb", "rockchip,rk3228"; + +- Rockchip RK3399 evb: + Required root node properties: + - compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt new file mode 100644 index 000000000000..c82a2e221bc1 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt @@ -0,0 +1,161 @@ +NVIDIA Tegra186 GPIO controllers + +Tegra186 contains two GPIO controllers; a main controller and an "AON" +controller. This binding document applies to both controllers. The register +layouts for the controllers share many similarities, but also some significant +differences. Hence, this document describes closely related but different +bindings and compatible values. + +The Tegra186 GPIO controller allows software to set the IO direction of, and +read/write the value of, numerous GPIO signals. Routing of GPIO signals to +package balls is under the control of a separate pin controller HW block. Two +major sets of registers exist: + +a) Security registers, which allow configuration of allowed access to the GPIO +register set. These registers exist in a single contiguous block of physical +address space. The size of this block, and the security features available, +varies between the different GPIO controllers. + +Access to this set of registers is not necessary in all circumstances. Code +that wishes to configure access to the GPIO registers needs access to these +registers to do so. Code which simply wishes to read or write GPIO data does not +need access to these registers. + +b) GPIO registers, which allow manipulation of the GPIO signals. In some GPIO +controllers, these registers are exposed via multiple "physical aliases" in +address space, each of which access the same underlying state. See the hardware +documentation for rationale. Any particular GPIO client is expected to access +just one of these physical aliases. + +Tegra HW documentation describes a unified naming convention for all GPIOs +implemented by the SoC. Each GPIO is assigned to a port, and a port may control +a number of GPIOs. Thus, each GPIO is named according to an alphabetical port +name and an integer GPIO name within the port. For example, GPIO_PA0, GPIO_PN6, +or GPIO_PCC3. + +The number of ports implemented by each GPIO controller varies. The number of +implemented GPIOs within each port varies. GPIO registers within a controller +are grouped and laid out according to the port they affect. + +The mapping from port name to the GPIO controller that implements that port, and +the mapping from port name to register offset within a controller, are both +extremely non-linear. The header file <dt-bindings/gpio/tegra186-gpio.h> +describes the port-level mapping. In that file, the naming convention for ports +matches the HW documentation. The values chosen for the names are alphabetically +sorted within a particular controller. Drivers need to map between the DT GPIO +IDs and HW register offsets using a lookup table. + +Each GPIO controller can generate a number of interrupt signals. Each signal +represents the aggregate status for all GPIOs within a set of ports. Thus, the +number of interrupt signals generated by a controller varies as a rough function +of the number of ports it implements. Note that the HW documentation refers to +both the overall controller HW module and the sets-of-ports as "controllers". + +Each GPIO controller in fact generates multiple interrupts signals for each set +of ports. Each GPIO may be configured to feed into a specific one of the +interrupt signals generated by a set-of-ports. The intent is for each generated +signal to be routed to a different CPU, thus allowing different CPUs to each +handle subsets of the interrupts within a port. The status of each of these +per-port-set signals is reported via a separate register. Thus, a driver needs +to know which status register to observe. This binding currently defines no +configuration mechanism for this. By default, drivers should use register +GPIO_${port}_INTERRUPT_STATUS_G1_0. Future revisions to the binding could +define a property to configure this. + +Required properties: +- compatible + Array of strings. + One of: + - "nvidia,tegra186-gpio". + - "nvidia,tegra186-gpio-aon". +- reg-names + Array of strings. + Contains a list of names for the register spaces described by the reg + property. May contain the following entries, in any order: + - "gpio": Mandatory. GPIO control registers. This may cover either: + a) The single physical alias that this OS should use. + b) All physical aliases that exist in the controller. This is + appropriate when the OS is responsible for managing assignment of + the physical aliases. + - "security": Optional. Security configuration registers. + Users of this binding MUST look up entries in the reg property by name, + using this reg-names property to do so. +- reg + Array of (physical base address, length) tuples. + Must contain one entry per entry in the reg-names property, in a matching + order. +- interrupts + Array of interrupt specifiers. + The interrupt outputs from the HW block, one per set of ports, in the + order the HW manual describes them. The number of entries required varies + depending on compatible value: + - "nvidia,tegra186-gpio": 6 entries. + - "nvidia,tegra186-gpio-aon": 1 entry. +- gpio-controller + Boolean. + Marks the device node as a GPIO controller/provider. +- #gpio-cells + Single-cell integer. + Must be <2>. + Indicates how many cells are used in a consumer's GPIO specifier. + In the specifier: + - The first cell is the pin number. + See <dt-bindings/gpio/tegra186-gpio.h>. + - The second cell contains flags: + - Bit 0 specifies polarity + - 0: Active-high (normal). + - 1: Active-low (inverted). +- interrupt-controller + Boolean. + Marks the device node as an interrupt controller/provider. +- #interrupt-cells + Single-cell integer. + Must be <2>. + Indicates how many cells are used in a consumer's interrupt specifier. + In the specifier: + - The first cell is the GPIO number. + See <dt-bindings/gpio/tegra186-gpio.h>. + - The second cell is contains flags: + - Bits [3:0] indicate trigger type and level: + - 1: Low-to-high edge triggered. + - 2: High-to-low edge triggered. + - 4: Active high level-sensitive. + - 8: Active low level-sensitive. + Valid combinations are 1, 2, 3, 4, 8. + +Example: + +#include <dt-bindings/interrupt-controller/irq.h> + +gpio@2200000 { + compatible = "nvidia,tegra186-gpio"; + reg-names = "security", "gpio"; + reg = + <0x0 0x2200000 0x0 0x10000>, + <0x0 0x2210000 0x0 0x10000>; + interrupts = + <0 47 IRQ_TYPE_LEVEL_HIGH>, + <0 50 IRQ_TYPE_LEVEL_HIGH>, + <0 53 IRQ_TYPE_LEVEL_HIGH>, + <0 56 IRQ_TYPE_LEVEL_HIGH>, + <0 59 IRQ_TYPE_LEVEL_HIGH>, + <0 180 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +}; + +gpio@c2f0000 { + compatible = "nvidia,tegra186-gpio-aon"; + reg-names = "security", "gpio"; + reg = + <0x0 0xc2f0000 0x0 0x1000>, + <0x0 0xc2f1000 0x0 0x1000>; + interrupts = + <0 60 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +}; diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt index 23bfe8e1f7cc..ff3db65e50de 100644 --- a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt +++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt @@ -1,9 +1,10 @@ -NVIDIA GK20A Graphics Processing Unit +NVIDIA Tegra Graphics Processing Units Required properties: -- compatible: "nvidia,<chip>-<gpu>" +- compatible: "nvidia,<gpu>" Currently recognized values: - - nvidia,tegra124-gk20a + - nvidia,gk20a + - nvidia,gm20b - reg: Physical base address and length of the controller's registers. Must contain two entries: - first entry for bar0 @@ -19,14 +20,20 @@ Required properties: - clock-names: Must include the following entries: - gpu - pwr +If the compatible string is "nvidia,gm20b", then the following clock +is also required: + - ref - resets: Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. - reset-names: Must include the following entries: - gpu -Example: +Optional properties: +- iommus: A reference to the IOMMU. See ../iommu/iommu.txt for details. - gpu@0,57000000 { +Example for GK20A: + + gpu@57000000 { compatible = "nvidia,gk20a"; reg = <0x0 0x57000000 0x0 0x01000000>, <0x0 0x58000000 0x0 0x01000000>; @@ -39,5 +46,25 @@ Example: clock-names = "gpu", "pwr"; resets = <&tegra_car 184>; reset-names = "gpu"; + iommus = <&mc TEGRA_SWGROUP_GPU>; + status = "disabled"; + }; + +Example for GM20B: + + gpu@57000000 { + compatible = "nvidia,gm20b"; + reg = <0x0 0x57000000 0x0 0x01000000>, + <0x0 0x58000000 0x0 0x01000000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "stall", "nonstall"; + clocks = <&tegra_car TEGRA210_CLK_GPU>, + <&tegra_car TEGRA210_CLK_PLL_P_OUT5>, + <&tegra_car TEGRA210_CLK_PLL_G_REF>; + clock-names = "gpu", "pwr", "ref"; + resets = <&tegra_car 184>; + reset-names = "gpu"; + iommus = <&mc TEGRA_SWGROUP_GPU>; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt index c7a26ca8da12..6611a7c2053a 100644 --- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt +++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt @@ -30,11 +30,90 @@ Required properties: region may not be present in some scenarios, such as in the device tree presented to a virtual machine. + - msi-parent + Value type: <phandle> + Definition: Must be present and point to the MSI controller node + handling message interrupts for the MC. + + - ranges + Value type: <prop-encoded-array> + Definition: A standard property. Defines the mapping between the child + MC address space and the parent system address space. + + The MC address space is defined by 3 components: + <region type> <offset hi> <offset lo> + + Valid values for region type are + 0x0 - MC portals + 0x1 - QBMAN portals + + - #address-cells + Value type: <u32> + Definition: Must be 3. (see definition in 'ranges' property) + + - #size-cells + Value type: <u32> + Definition: Must be 1. + +Sub-nodes: + + The fsl-mc node may optionally have dpmac sub-nodes that describe + the relationship between the Ethernet MACs which belong to the MC + and the Ethernet PHYs on the system board. + + The dpmac nodes must be under a node named "dpmacs" which contains + the following properties: + + - #address-cells + Value type: <u32> + Definition: Must be present if dpmac sub-nodes are defined and must + have a value of 1. + + - #size-cells + Value type: <u32> + Definition: Must be present if dpmac sub-nodes are defined and must + have a value of 0. + + These nodes must have the following properties: + + - compatible + Value type: <string> + Definition: Must be "fsl,qoriq-mc-dpmac". + + - reg + Value type: <prop-encoded-array> + Definition: Specifies the id of the dpmac. + + - phy-handle + Value type: <phandle> + Definition: Specifies the phandle to the PHY device node associated + with the this dpmac. + Example: fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ - }; + msi-parent = <&its>; + #address-cells = <3>; + #size-cells = <1>; + + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; + dpmacs { + #address-cells = <1>; + #size-cells = <0>; + + dpmac@1 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <1>; + phy-handle = <&mdio0_phy0>; + } + } + }; diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt index ea5614b6f613..07184e8f894e 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt @@ -15,6 +15,7 @@ Required Properties: - "rockchip,rk3288-dw-mshc": for Rockchip RK3288 - "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036 - "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368 + - "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399 Optional Properties: * clocks: from common clock binding: if ciu_drive and ciu_sample are diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt index 0333ec87dc49..c34aa6f8a424 100644 --- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt @@ -5,7 +5,8 @@ Required properties: "fsl,imx7d-qspi", "fsl,imx6ul-qspi", "fsl,ls1021a-qspi" or - "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi" + "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi", + "fsl,ls1043a-qspi" followed by "fsl,ls1021a-qspi" - reg : the first contains the register location and length, the second contains the memory mapping address and length - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory" diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index fa77f874e321..1ad0fe310ff9 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -1,7 +1,10 @@ ARM Freescale DSPI controller Required properties: -- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", "fsl,ls2085a-dspi" +- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", + "fsl,ls2085a-dspi" + or + "fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi" - reg : Offset and length of the register set for the device - interrupts : Should contain SPI controller interrupt - clocks: from common clock binding: handle to dspi clock. diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 6a17aa85c4d5..966885c636d0 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -4,6 +4,7 @@ Required properties: - compatible: should be one or more of - "generic-xhci" for generic XHCI device + - "marvell,armada3700-xhci" for Armada 37xx SoCs - "marvell,armada-375-xhci" for Armada 375 SoCs - "marvell,armada-380-xhci" for Armada 38x SoCs - "renesas,xhci-r8a7790" for r8a7790 SoC diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index d06dd3eba05c..3af48e8cc7d0 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -93,6 +93,7 @@ firefly Firefly focaltech FocalTech Systems Co.,Ltd fsl Freescale Semiconductor ge General Electric Company +geekbuying GeekBuying GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. geniatech Geniatech, Inc. diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 330fae966cf3..6e199c903676 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -18,6 +18,7 @@ dts-dirs += rockchip dts-dirs += socionext dts-dirs += sprd dts-dirs += xilinx +dts-dirs += lg subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index eb672f38f89e..47ec703cb230 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,3 +1,6 @@ +dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts new file mode 100644 index 000000000000..7f2c6747a71e --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -0,0 +1,69 @@ +/* + * Copyright (c) 2016 Andreas Färber + * Copyright (c) 2016 BayLibre, Inc. + * Author: Kevin Hilman <khilman@kernel.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxbb.dtsi" + +/ { + compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb"; + model = "Hardkernel ODROID-C2"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&uart_AO { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts new file mode 100644 index 000000000000..62979076e250 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -0,0 +1,52 @@ +/* + * Copyright (c) 2016 Andreas Färber + * Copyright (c) 2016 BayLibre, Inc. + * Author: Kevin Hilman <khilman@kernel.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxbb-p20x.dtsi" + +/ { + compatible = "amlogic,p200", "amlogic,meson-gxbb"; + model = "Amlogic Meson GXBB P200 Development Board"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts new file mode 100644 index 000000000000..39bb037a3e47 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts @@ -0,0 +1,52 @@ +/* + * Copyright (c) 2016 Andreas Färber + * Copyright (c) 2016 BayLibre, Inc. + * Author: Kevin Hilman <khilman@kernel.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxbb-p20x.dtsi" + +/ { + compatible = "amlogic,p201", "amlogic,meson-gxbb"; + model = "Amlogic Meson GXBB P201 Development Board"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi new file mode 100644 index 000000000000..bf7ff1d41851 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -0,0 +1,65 @@ +/* + * Copyright (c) 2016 Andreas Färber + * Copyright (c) 2016 BayLibre, Inc. + * Author: Kevin Hilman <khilman@kernel.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "meson-gxbb.dtsi" + +/ { + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; +}; + +/* This UART is brought out to the DB9 connector */ +&uart_AO { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts index 399aff9e7975..62fb4968d680 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts @@ -48,7 +48,7 @@ compatible = "tronsmart,vega-s95-meta", "tronsmart,vega-s95", "amlogic,meson-gxbb"; model = "Tronsmart Vega S95 Meta"; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts index ac5a241b5ec2..9a9663abdf5c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts @@ -48,7 +48,7 @@ compatible = "tronsmart,vega-s95-pro", "tronsmart,vega-s95", "amlogic,meson-gxbb"; model = "Tronsmart Vega S95 Pro"; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts index fff7bfa2aa39..2fe167b2609d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts @@ -48,7 +48,7 @@ compatible = "tronsmart,vega-s95-telos", "tronsmart,vega-s95", "amlogic,meson-gxbb"; model = "Tronsmart Vega S95 Telos"; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index c1fa2667ec5c..012cdccc8a35 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -45,6 +45,10 @@ / { compatible = "tronsmart,vega-s95", "amlogic,meson-gxbb"; + aliases { + serial0 = &uart_AO; + }; + chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index eaa0a4553734..832815d80462 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -50,11 +50,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - serial0 = &uart_AO; - serial1 = &uart_A; - }; - cpus { #address-cells = <0x2>; #size-cells = <0x0>; diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi index ba0487751524..c569f761d090 100644 --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi @@ -543,7 +543,7 @@ }; sata1: sata@1a000000 { - compatible = "apm,xgene-ahci"; + compatible = "apm,xgene-ahci-v2"; reg = <0x0 0x1a000000 0x0 0x1000>, <0x0 0x1f200000 0x0 0x1000>, <0x0 0x1f20d000 0x0 0x1000>, @@ -553,7 +553,7 @@ }; sata2: sata@1a200000 { - compatible = "apm,xgene-ahci"; + compatible = "apm,xgene-ahci-v2"; reg = <0x0 0x1a200000 0x0 0x1000>, <0x0 0x1f210000 0x0 0x1000>, <0x0 0x1f21d000 0x0 0x1000>, @@ -563,7 +563,7 @@ }; sata3: sata@1a400000 { - compatible = "apm,xgene-ahci"; + compatible = "apm,xgene-ahci-v2"; reg = <0x0 0x1a400000 0x0 0x1000>, <0x0 0x1f220000 0x0 0x1000>, <0x0 0x1f22d000 0x0 0x1000>, diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 68ccc39a7a66..dee2386d3b9b 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -272,3 +272,13 @@ /include/ "juno-motherboard.dtsi" }; + + site2: tlx@60000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x60000000 0x10000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0>; + interrupt-map = <0 0 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/arch/arm64/boot/dts/broadcom/ns2-clock.dtsi b/arch/arm64/boot/dts/broadcom/ns2-clock.dtsi new file mode 100644 index 000000000000..99009fdf10a4 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/ns2-clock.dtsi @@ -0,0 +1,105 @@ +/* + * BSD LICENSE + * + * Copyright (c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <dt-bindings/clock/bcm-ns2.h> + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + lcpll_ddr: lcpll_ddr@6501d058 { + #clock-cells = <1>; + compatible = "brcm,ns2-lcpll-ddr"; + reg = <0x6501d058 0x20>, + <0x6501c020 0x4>, + <0x6501d04c 0x4>; + clocks = <&osc>; + clock-output-names = "lcpll_ddr", "pcie_sata_usb", + "ddr", "ddr_ch2_unused", + "ddr_ch3_unused", "ddr_ch4_unused", + "ddr_ch5_unused"; + }; + + lcpll_ports: lcpll_ports@6501d078 { + #clock-cells = <1>; + compatible = "brcm,ns2-lcpll-ports"; + reg = <0x6501d078 0x20>, + <0x6501c020 0x4>, + <0x6501d054 0x4>; + clocks = <&osc>; + clock-output-names = "lcpll_ports", "wan", "rgmii", + "ports_ch2_unused", + "ports_ch3_unused", + "ports_ch4_unused", + "ports_ch5_unused"; + }; + + genpll_scr: genpll_scr@6501d098 { + #clock-cells = <1>; + compatible = "brcm,ns2-genpll-scr"; + reg = <0x6501d098 0x32>, + <0x6501c020 0x4>, + <0x6501d044 0x4>; + clocks = <&osc>; + clock-output-names = "genpll_scr", "scr", "fs", + "audio_ref", "scr_ch3_unused", + "scr_ch4_unused", "scr_ch5_unused"; + }; + + iprocmed: iprocmed { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>; + clock-div = <2>; + clock-mult = <1>; + }; + + iprocslow: iprocslow { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>; + clock-div = <4>; + clock-mult = <1>; + }; + + genpll_sw: genpll_sw@6501d0c4 { + #clock-cells = <1>; + compatible = "brcm,ns2-genpll-sw"; + reg = <0x6501d0c4 0x32>, + <0x6501c020 0x4>, + <0x6501d044 0x4>; + clocks = <&osc>; + clock-output-names = "genpll_sw", "rpe", "250", "nic", + "chimp", "port", "sdio"; + }; diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts index ce0ab84e0f2d..54ca40c9f711 100644 --- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts +++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts @@ -72,6 +72,51 @@ status = "ok"; }; +&ssp0 { + status = "ok"; + + slic@0 { + compatible = "silabs,si3226x"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha = <1>; + spi-cpol = <1>; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,slave-tx-disable = <0>; + pl022,com-mode = <0>; + pl022,rx-level-trig = <1>; + pl022,tx-level-trig = <1>; + pl022,ctrl-len = <11>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + }; +}; + +&ssp1 { + status = "ok"; + + at25@0 { + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; + at25,byte-len = <0x8000>; + at25,addr-mode = <2>; + at25,page-size = <64>; + spi-cpha = <1>; + spi-cpol = <1>; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,slave-tx-disable = <0>; + pl022,com-mode = <0>; + pl022,rx-level-trig = <1>; + pl022,tx-level-trig = <1>; + pl022,ctrl-len = <11>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + }; +}; + &sdio0 { status = "ok"; }; diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi index 6f81c9d7fb06..ec68ec1a80c8 100644 --- a/arch/arm64/boot/dts/broadcom/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi @@ -1,7 +1,7 @@ /* * BSD LICENSE * - * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * Copyright (c) 2015 Broadcom. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -33,8 +33,6 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/bcm-ns2.h> -/memreserve/ 0x84b00000 0x00000008; - / { compatible = "brcm,ns2"; interrupt-parent = <&gic>; @@ -49,8 +47,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57", "arm,armv8"; reg = <0 0>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x84b00000>; + enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; }; @@ -58,8 +55,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57", "arm,armv8"; reg = <0 1>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x84b00000>; + enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; }; @@ -67,8 +63,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57", "arm,armv8"; reg = <0 2>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x84b00000>; + enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; }; @@ -76,8 +71,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57", "arm,armv8"; reg = <0 3>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x84b00000>; + enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; }; @@ -86,6 +80,11 @@ }; }; + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) | @@ -110,33 +109,6 @@ <&A57_3>; }; - clocks { - #address-cells = <1>; - #size-cells = <1>; - - osc: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - }; - - iprocmed: iprocmed { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>; - clock-div = <2>; - clock-mult = <1>; - }; - - iprocslow: iprocslow { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>; - clock-div = <4>; - clock-mult = <1>; - }; - }; - pcie0: pcie@20020000 { compatible = "brcm,iproc-pcie"; reg = <0 0x20020000 0 0x1000>; @@ -217,6 +189,27 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + #include "ns2-clock.dtsi" + + dma0: dma@61360000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x61360000 0x1000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + clocks = <&iprocslow>; + clock-names = "apb_pclk"; + }; + smmu: mmu@64000000 { compatible = "arm,mmu-500"; reg = <0x64000000 0x40000>; @@ -258,68 +251,6 @@ mmu-masters; }; - lcpll_ddr: lcpll_ddr@6501d058 { - #clock-cells = <1>; - compatible = "brcm,ns2-lcpll-ddr"; - reg = <0x6501d058 0x20>, - <0x6501c020 0x4>, - <0x6501d04c 0x4>; - clocks = <&osc>; - clock-output-names = "lcpll_ddr", "pcie_sata_usb", - "ddr", "ddr_ch2_unused", - "ddr_ch3_unused", "ddr_ch4_unused", - "ddr_ch5_unused"; - }; - - lcpll_ports: lcpll_ports@6501d078 { - #clock-cells = <1>; - compatible = "brcm,ns2-lcpll-ports"; - reg = <0x6501d078 0x20>, - <0x6501c020 0x4>, - <0x6501d054 0x4>; - clocks = <&osc>; - clock-output-names = "lcpll_ports", "wan", "rgmii", - "ports_ch2_unused", - "ports_ch3_unused", - "ports_ch4_unused", - "ports_ch5_unused"; - }; - - genpll_scr: genpll_scr@6501d098 { - #clock-cells = <1>; - compatible = "brcm,ns2-genpll-scr"; - reg = <0x6501d098 0x32>, - <0x6501c020 0x4>, - <0x6501d044 0x4>; - clocks = <&osc>; - clock-output-names = "genpll_scr", "scr", "fs", - "audio_ref", "scr_ch3_unused", - "scr_ch4_unused", "scr_ch5_unused"; - }; - - genpll_sw: genpll_sw@6501d0c4 { - #clock-cells = <1>; - compatible = "brcm,ns2-genpll-sw"; - reg = <0x6501d0c4 0x32>, - <0x6501c020 0x4>, - <0x6501d044 0x4>; - clocks = <&osc>; - clock-output-names = "genpll_sw", "rpe", "250", "nic", - "chimp", "port", "sdio"; - }; - - crmu: crmu@65024000 { - compatible = "syscon"; - reg = <0x65024000 0x100>; - }; - - reboot@65024000 { - compatible ="syscon-reboot"; - regmap = <&crmu>; - offset = <0x90>; - mask = <0xfffffffd>; - }; - gic: interrupt-controller@65210000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -328,6 +259,8 @@ <0x65220000 0x1000>, <0x65240000 0x2000>, <0x65260000 0x1000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) | + IRQ_TYPE_LEVEL_HIGH)>; }; timer0: timer@66030000 { @@ -408,6 +341,28 @@ status = "disabled"; }; + ssp0: ssp@66180000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x66180000 0x1000>; + interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>, <&iprocslow>; + clock-names = "spiclk", "apb_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssp1: ssp@66190000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x66190000 0x1000>; + interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>, <&iprocslow>; + clock-names = "spiclk", "apb_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + hwrng: hwrng@66220000 { compatible = "brcm,iproc-rng200"; reg = <0x66220000 0x28>; diff --git a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi new file mode 100644 index 000000000000..1d6dcf2aadba --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi @@ -0,0 +1,25 @@ +/* + * Device tree sources for Exynos7 TMU sensor configuration + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/thermal/thermal_exynos.h> + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <9>; +samsung,tmu_reference_voltage = <17>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <75>; +samsung,tmu_min_efuse_value = <15>; +samsung,tmu_max_efuse_value = <100>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <85>; +samsung,tmu_default_temp_offset = <50>; +samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi new file mode 100644 index 000000000000..062358355a53 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi @@ -0,0 +1,54 @@ +/* + * Device tree sources for default Exynos7 thermal zone definition + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +trips { + cpu-alert-0 { + temperature = <75000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu-alert-1 { + temperature = <80000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu-alert-2 { + temperature = <85000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu-alert-3 { + temperature = <90000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu-alert-4 { + temperature = <95000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu-alert-5 { + temperature = <100000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu-alert-6 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu-crit-0 { + temperature = <115000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 93108f1a90f9..ca663dfe5189 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -27,6 +27,7 @@ pinctrl6 = &pinctrl_fsys0; pinctrl7 = &pinctrl_fsys1; pinctrl8 = &pinctrl_bus1; + tmuctrl0 = &tmuctrl_0; }; cpus { @@ -95,6 +96,35 @@ <0x11006000 0x2000>; }; + amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pdma0: pdma@10E10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10E10000 0x1000>; + interrupts = <0 225 0>; + clocks = <&clock_fsys0 ACLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@10EB0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10EB0000 0x1000>; + interrupts = <0 226 0>; + clocks = <&clock_fsys0 ACLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + }; + clock_topc: clock-controller@10570000 { compatible = "samsung,exynos7-clock-topc"; reg = <0x10570000 0x10000>; @@ -538,6 +568,25 @@ clocks = <&clock_peric0 PCLK_PWM>; clock-names = "timers"; }; + + tmuctrl_0: tmu@10060000 { + compatible = "samsung,exynos7-tmu"; + reg = <0x10060000 0x200>; + interrupts = <0 108 0>; + clocks = <&clock_peris PCLK_TMU>, + <&clock_peris SCLK_TMU>; + clock-names = "tmu_apbif", "tmu_sclk"; + #include "exynos7-tmu-sensor-conf.dtsi" + }; + + thermal-zones { + atlas_thermal: cluster0-thermal { + polling-delay-passive = <0>; /* milliseconds */ + polling-delay = <0>; /* milliseconds */ + thermal-sensors = <&tmuctrl_0>; + #include "exynos7-trip-points.dtsi" + }; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index f3c25165dad3..1b7783db7de4 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -1,7 +1,8 @@ +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb -dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts new file mode 100644 index 000000000000..9d3e9fe1c87c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -0,0 +1,181 @@ +/* + * Device Tree Include file for Freescale Layerscape-1043A family SoC. + * + * Copyright 2014-2015, Freescale Semiconductor + * + * Mingkai Hu <Mingkai.hu@freescale.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "fsl-ls1043a.dtsi" + +/ { + model = "LS1043A QDS Board"; + compatible = "fsl,ls1043a-qds", "fsl,ls1043a"; + + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + serial0 = &lpuart0; + serial1 = &lpuart1; + serial2 = &lpuart2; + serial3 = &lpuart3; + serial4 = &lpuart4; + serial5 = &lpuart5; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NOR, NAND Flashes and FPGA on board */ + ranges = <0x0 0x0 0x0 0x60000000 0x08000000 + 0x1 0x0 0x0 0x7e800000 0x00010000 + 0x2 0x0 0x0 0x7fb00000 0x00000100>; + status = "okay"; + + nor@0,0 { + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + }; + + fpga: board-control@2,0 { + compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis"; + reg = <0x2 0x0 0x0000100>; + }; +}; + +&i2c0 { + status = "okay"; + + pca9547@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + /* IRQ10_B */ + interrupts = <0 150 0x4>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + eeprom@56 { + compatible = "atmel,24c512"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c512"; + reg = <0x57>; + }; + + temp-sensor@4c { + compatible = "adi,adt7461a"; + reg = <0x4c>; + }; + }; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&qspi { + bus-num = <0>; + status = "okay"; + + qflash0: s25fl128s@0 { + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index ce235577e90f..f895fc02ab06 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -107,6 +107,19 @@ }; }; +&dspi0 { + bus-num = <0>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13", "jedec,spi-nor"; /* 16MB */ + reg = <0>; + spi-max-frequency = <1000000>; /* input clock */ + }; +}; + &duart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index be72bf5b58b5..de0323b48b1e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -171,6 +171,20 @@ interrupts = <0 43 0x4>; }; + qspi: quadspi@1550000 { + compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x1550000 0x0 0x10000>, + <0x0 0x40000000 0x0 0x4000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <0 99 0x4>; + clock-names = "qspi_en", "qspi"; + clocks = <&clockgen 4 0>, <&clockgen 4 0>; + big-endian; + status = "disabled"; + }; + esdhc: esdhc@1560000 { compatible = "fsl,ls1043a-esdhc", "fsl,esdhc"; reg = <0x0 0x1560000 0x0 0x10000>; @@ -284,7 +298,7 @@ }; gpio1: gpio@2300000 { - compatible = "fsl,ls1043a-gpio"; + compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; interrupts = <0 66 0x4>; gpio-controller; @@ -294,7 +308,7 @@ }; gpio2: gpio@2310000 { - compatible = "fsl,ls1043a-gpio"; + compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2310000 0x0 0x10000>; interrupts = <0 67 0x4>; gpio-controller; @@ -304,7 +318,7 @@ }; gpio3: gpio@2320000 { - compatible = "fsl,ls1043a-gpio"; + compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2320000 0x0 0x10000>; interrupts = <0 68 0x4>; gpio-controller; @@ -314,7 +328,7 @@ }; gpio4: gpio@2330000 { - compatible = "fsl,ls1043a-gpio"; + compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2330000 0x0 0x10000>; interrupts = <0 134 0x4>; gpio-controller; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts index 4cb996d6e686..e8801faca996 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts @@ -178,7 +178,14 @@ &qspi { status = "okay"; - qflash0: s25fl008k { + flash0: s25fl256s1@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <20000000>; + reg = <0>; + }; + flash2: s25fl256s1@2 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index 9d746c69a789..3187c822afa3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -265,6 +265,104 @@ compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + msi-parent = <&its>; + #address-cells = <3>; + #size-cells = <1>; + + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; + + /* + * Define the maximum number of MACs present on the SoC. + */ + dpmacs { + #address-cells = <1>; + #size-cells = <0>; + + dpmac1: dpmac@1 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x1>; + }; + + dpmac2: dpmac@2 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x2>; + }; + + dpmac3: dpmac@3 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x3>; + }; + + dpmac4: dpmac@4 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x4>; + }; + + dpmac5: dpmac@5 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x5>; + }; + + dpmac6: dpmac@6 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x6>; + }; + + dpmac7: dpmac@7 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x7>; + }; + + dpmac8: dpmac@8 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x8>; + }; + + dpmac9: dpmac@9 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x9>; + }; + + dpmac10: dpmac@a { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xa>; + }; + + dpmac11: dpmac@b { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xb>; + }; + + dpmac12: dpmac@c { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xc>; + }; + + dpmac13: dpmac@d { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xd>; + }; + + dpmac14: dpmac@e { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xe>; + }; + + dpmac15: dpmac@f { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xf>; + }; + + dpmac16: dpmac@10 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x10>; + }; + }; }; smmu: iommu@5000000 { @@ -318,7 +416,7 @@ dspi: dspi@2100000 { status = "disabled"; - compatible = "fsl,vf610-dspi"; + compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2100000 0x0 0x10000>; @@ -342,7 +440,7 @@ }; gpio0: gpio@2300000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; interrupts = <0 36 0x4>; /* Level high type */ gpio-controller; @@ -353,7 +451,7 @@ }; gpio1: gpio@2310000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2310000 0x0 0x10000>; interrupts = <0 36 0x4>; /* Level high type */ gpio-controller; @@ -364,7 +462,7 @@ }; gpio2: gpio@2320000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2320000 0x0 0x10000>; interrupts = <0 37 0x4>; /* Level high type */ gpio-controller; @@ -375,7 +473,7 @@ }; gpio3: gpio@2330000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2330000 0x0 0x10000>; interrupts = <0 37 0x4>; /* Level high type */ gpio-controller; @@ -444,7 +542,7 @@ qspi: quadspi@20c0000 { status = "disabled"; - compatible = "fsl,vf610-qspi"; + compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x20c0000 0x0 0x10000>, diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile index cd158b80e29b..d5f43a06b1c1 100644 --- a/arch/arm64/boot/dts/hisilicon/Makefile +++ b/arch/arm64/boot/dts/hisilicon/Makefile @@ -1,4 +1,6 @@ -dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb hip05-d02.dtb +dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb +dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb +dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 818525197508..e92a30c87a82 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -6,11 +6,9 @@ */ /dts-v1/; - -/*Reserved 1MB memory for MCU*/ -/memreserve/ 0x05e00000 0x00100000; - #include "hi6220.dtsi" +#include "hikey-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "HiKey Development Board"; @@ -27,9 +25,201 @@ stdout-path = "serial3:115200n8"; }; + /* + * Reserve below regions from memory node: + * + * 0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using + * 0x06df,f000 - 0x06df,ffff: Mailbox message data + * 0x0740,f000 - 0x0740,ffff: MCU firmware section + * 0x3e00,0000 - 0x3fff,ffff: OP-TEE + */ memory@0 { device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; + reg = <0x00000000 0x00000000 0x00000000 0x05e00000>, + <0x00000000 0x05f00000 0x00000000 0x00eff000>, + <0x00000000 0x06e00000 0x00000000 0x0060f000>, + <0x00000000 0x07410000 0x00000000 0x36bf0000>; + }; + + soc { + spi0: spi@f7106000 { + status = "ok"; + }; + + i2c0: i2c@f7100000 { + status = "ok"; + }; + + i2c1: i2c@f7101000 { + status = "ok"; + }; + + uart1: uart@f7111000 { + status = "ok"; + }; + + uart2: uart@f7112000 { + status = "ok"; + }; + + uart3: uart@f7113000 { + status = "ok"; + }; + + dwmmc_2: dwmmc2@f723f000 { + ti,non-removable; + non-removable; + /* WL_EN */ + vmmc-supply = <&wlan_en_reg>; + + #address-cells = <0x1>; + #size-cells = <0x0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; /* sdio func num */ + /* WL_IRQ, WL_HOST_WAKE_GPIO1_3 */ + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + }; + }; + + wlan_en_reg: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* WLAN_EN GPIO */ + gpio = <&gpio0 5 0>; + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; + }; + + leds { + compatible = "gpio-leds"; + user_led4 { + label = "user_led4"; + gpios = <&gpio4 0 0>; /* <&gpio_user_led_1>; */ + linux,default-trigger = "heartbeat"; + }; + + user_led3 { + label = "user_led3"; + gpios = <&gpio4 1 0>; /* <&gpio_user_led_2>; */ + linux,default-trigger = "mmc0"; + }; + + user_led2 { + label = "user_led2"; + gpios = <&gpio4 2 0>; /* <&gpio_user_led_3>; */ + linux,default-trigger = "mmc1"; + }; + + user_led1 { + label = "user_led1"; + gpios = <&gpio4 3 0>; /* <&gpio_user_led_4>; */ + linux,default-trigger = "cpu0"; + }; + + wlan_active_led { + label = "wifi_active"; + gpios = <&gpio3 5 0>; /* <&gpio_wlan_active_led>; */ + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led { + label = "bt_active"; + gpios = <&gpio4 7 0>; /* <&gpio_bt_active_led>; */ + linux,default-trigger = "hci0rx"; + default-state = "off"; + }; + }; + + pmic: pmic@f8000000 { + compatible = "hisilicon,hi655x-pmic"; + reg = <0x0 0xf8000000 0x0 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + + regulators { + ldo2: LDO2 { + regulator-name = "LDO2_2V8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3200000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo7: LDO7 { + regulator-name = "LDO7_SDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo10: LDO10 { + regulator-name = "LDO10_2V85"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <360>; + }; + + ldo13: LDO13 { + regulator-name = "LDO13_1V8"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1950000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo14: LDO14 { + regulator-name = "LDO14_2V8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3200000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo15: LDO15 { + regulator-name = "LDO15_1V8"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1950000>; + regulator-boot-on; + regulator-always-on; + regulator-enable-ramp-delay = <120>; + }; + + ldo17: LDO17 { + regulator-name = "LDO17_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3200000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo19: LDO19 { + regulator-name = "LDO19_3V0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <360>; + }; + + ldo21: LDO21 { + regulator-name = "LDO21_1V8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-enable-ramp-delay = <120>; + }; + + ldo22: LDO22 { + regulator-name = "LDO22_1V2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + regulator-enable-ramp-delay = <120>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index ad1f1ebcb05c..189d21541f9c 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -6,6 +6,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/hi6220-clock.h> +#include <dt-bindings/pinctrl/hisi.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "hisilicon,hi6220"; @@ -53,11 +55,42 @@ }; }; + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <700>; + exit-latency-us = <250>; + min-residency-us = <1000>; + }; + + CLUSTER_SLEEP: cluster-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <1000>; + exit-latency-us = <700>; + min-residency-us = <2700>; + wakeup-latency-us = <1500>; + }; + }; + cpu0: cpu@0 { compatible = "arm,cortex-a53", "arm,armv8"; device_type = "cpu"; reg = <0x0 0x0>; enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; + clocks = <&stub_clock 0>; + operating-points-v2 = <&cpu_opp_table>; + cooling-min-level = <4>; + cooling-max-level = <0>; + #cooling-cells = <2>; /* min followed by max */ + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <311>; }; cpu1: cpu@1 { @@ -65,6 +98,9 @@ device_type = "cpu"; reg = <0x0 0x1>; enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; + operating-points-v2 = <&cpu_opp_table>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu2: cpu@2 { @@ -72,6 +108,9 @@ device_type = "cpu"; reg = <0x0 0x2>; enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; + operating-points-v2 = <&cpu_opp_table>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu3: cpu@3 { @@ -79,6 +118,9 @@ device_type = "cpu"; reg = <0x0 0x3>; enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; + operating-points-v2 = <&cpu_opp_table>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu4: cpu@100 { @@ -86,6 +128,9 @@ device_type = "cpu"; reg = <0x0 0x100>; enable-method = "psci"; + next-level-cache = <&CLUSTER1_L2>; + operating-points-v2 = <&cpu_opp_table>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu5: cpu@101 { @@ -93,6 +138,9 @@ device_type = "cpu"; reg = <0x0 0x101>; enable-method = "psci"; + next-level-cache = <&CLUSTER1_L2>; + operating-points-v2 = <&cpu_opp_table>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu6: cpu@102 { @@ -100,6 +148,9 @@ device_type = "cpu"; reg = <0x0 0x102>; enable-method = "psci"; + next-level-cache = <&CLUSTER1_L2>; + operating-points-v2 = <&cpu_opp_table>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu7: cpu@103 { @@ -107,6 +158,48 @@ device_type = "cpu"; reg = <0x0 0x103>; enable-method = "psci"; + next-level-cache = <&CLUSTER1_L2>; + operating-points-v2 = <&cpu_opp_table>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + }; + + CLUSTER0_L2: l2-cache0 { + compatible = "cache"; + }; + + CLUSTER1_L2: l2-cache1 { + compatible = "cache"; + }; + }; + + cpu_opp_table: cpu_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <208000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <500000>; + }; + opp01 { + opp-hz = /bits/ 64 <432000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <500000>; + }; + opp02 { + opp-hz = /bits/ 64 <729000000>; + opp-microvolt = <1090000>; + clock-latency-ns = <500000>; + }; + opp03 { + opp-hz = /bits/ 64 <960000000>; + opp-microvolt = <1180000>; + clock-latency-ns = <500000>; + }; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1330000>; + clock-latency-ns = <500000>; }; }; @@ -137,6 +230,11 @@ #size-cells = <2>; ranges; + sram: sram@fff80000 { + compatible = "hisilicon,hi6220-sramctrl", "syscon"; + reg = <0x0 0xfff80000 0x0 0x12000>; + }; + ao_ctrl: ao_ctrl@f7800000 { compatible = "hisilicon,hi6220-aoctrl", "syscon"; reg = <0x0 0xf7800000 0x0 0x2000>; @@ -162,6 +260,14 @@ #clock-cells = <1>; }; + stub_clock: stub_clock { + compatible = "hisilicon,hi6220-stub-clk"; + hisilicon,hi6220-clk-sram = <&sram>; + #clock-cells = <1>; + mbox-names = "mbox-tx"; + mboxes = <&mailbox 1 0 11>; + }; + uart0: uart@f8015000 { /* console */ compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xf8015000 0x0 0x1000>; @@ -178,6 +284,8 @@ clocks = <&sys_ctrl HI6220_UART1_PCLK>, <&sys_ctrl HI6220_UART1_PCLK>; clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func1 &uart1_cfg_func2>; status = "disabled"; }; @@ -188,6 +296,8 @@ clocks = <&sys_ctrl HI6220_UART2_PCLK>, <&sys_ctrl HI6220_UART2_PCLK>; clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; status = "disabled"; }; @@ -198,6 +308,9 @@ clocks = <&sys_ctrl HI6220_UART3_PCLK>, <&sys_ctrl HI6220_UART3_PCLK>; clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; + status = "disabled"; }; uart4: uart@f7114000 { @@ -207,7 +320,517 @@ clocks = <&sys_ctrl HI6220_UART4_PCLK>, <&sys_ctrl HI6220_UART4_PCLK>; clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; status = "disabled"; }; + + dual_timer0: timer@f8008000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x0 0xf8008000 0x0 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ao_ctrl HI6220_TIMER0_PCLK>, + <&ao_ctrl HI6220_TIMER0_PCLK>, + <&ao_ctrl HI6220_TIMER0_PCLK>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + pmx0: pinmux@f7010000 { + compatible = "pinctrl-single"; + reg = <0x0 0xf7010000 0x0 0x27c>; + #address-cells = <1>; + #size-cells = <1>; + #gpio-range-cells = <3>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <7>; + pinctrl-single,gpio-range = < + &range 80 8 MUX_M0 /* gpio 3: [0..7] */ + &range 88 8 MUX_M0 /* gpio 4: [0..7] */ + &range 96 8 MUX_M0 /* gpio 5: [0..7] */ + &range 104 8 MUX_M0 /* gpio 6: [0..7] */ + &range 112 8 MUX_M0 /* gpio 7: [0..7] */ + &range 120 2 MUX_M0 /* gpio 8: [0..1] */ + &range 2 6 MUX_M1 /* gpio 8: [2..7] */ + &range 8 8 MUX_M1 /* gpio 9: [0..7] */ + &range 0 1 MUX_M1 /* gpio 10: [0] */ + &range 16 7 MUX_M1 /* gpio 10: [1..7] */ + &range 23 3 MUX_M1 /* gpio 11: [0..2] */ + &range 28 5 MUX_M1 /* gpio 11: [3..7] */ + &range 33 3 MUX_M1 /* gpio 12: [0..2] */ + &range 43 5 MUX_M1 /* gpio 12: [3..7] */ + &range 48 8 MUX_M1 /* gpio 13: [0..7] */ + &range 56 8 MUX_M1 /* gpio 14: [0..7] */ + &range 74 6 MUX_M1 /* gpio 15: [0..5] */ + &range 122 1 MUX_M1 /* gpio 15: [6] */ + &range 126 1 MUX_M1 /* gpio 15: [7] */ + &range 127 8 MUX_M1 /* gpio 16: [0..7] */ + &range 135 8 MUX_M1 /* gpio 17: [0..7] */ + &range 143 8 MUX_M1 /* gpio 18: [0..7] */ + &range 151 8 MUX_M1 /* gpio 19: [0..7] */ + >; + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + }; + + pmx1: pinmux@f7010800 { + compatible = "pinconf-single"; + reg = <0x0 0xf7010800 0x0 0x28c>; + #address-cells = <1>; + #size-cells = <1>; + pinctrl-single,register-width = <32>; + }; + + pmx2: pinmux@f8001800 { + compatible = "pinconf-single"; + reg = <0x0 0xf8001800 0x0 0x78>; + #address-cells = <1>; + #size-cells = <1>; + pinctrl-single,register-width = <32>; + }; + + gpio0: gpio@f8011000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf8011000 0x0 0x1000>; + interrupts = <0 52 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio@f8012000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf8012000 0x0 0x1000>; + interrupts = <0 53 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio@f8013000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf8013000 0x0 0x1000>; + interrupts = <0 54 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio3: gpio@f8014000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf8014000 0x0 0x1000>; + interrupts = <0 55 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 80 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio4: gpio@f7020000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7020000 0x0 0x1000>; + interrupts = <0 56 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 88 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio5: gpio@f7021000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7021000 0x0 0x1000>; + interrupts = <0 57 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 96 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio6: gpio@f7022000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7022000 0x0 0x1000>; + interrupts = <0 58 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 104 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio7: gpio@f7023000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7023000 0x0 0x1000>; + interrupts = <0 59 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 112 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio8: gpio@f7024000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7024000 0x0 0x1000>; + interrupts = <0 60 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 120 2 &pmx0 2 2 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio9: gpio@f7025000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7025000 0x0 0x1000>; + interrupts = <0 61 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 8 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio10: gpio@f7026000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7026000 0x0 0x1000>; + interrupts = <0 62 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 0 1 &pmx0 1 16 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio11: gpio@f7027000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7027000 0x0 0x1000>; + interrupts = <0 63 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 23 3 &pmx0 3 28 5>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio12: gpio@f7028000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7028000 0x0 0x1000>; + interrupts = <0 64 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 33 3 &pmx0 3 43 5>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio13: gpio@f7029000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7029000 0x0 0x1000>; + interrupts = <0 65 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 48 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio14: gpio@f702a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf702a000 0x0 0x1000>; + interrupts = <0 66 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 56 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio15: gpio@f702b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf702b000 0x0 0x1000>; + interrupts = <0 67 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < + &pmx0 0 74 6 + &pmx0 6 122 1 + &pmx0 7 126 1 + >; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio16: gpio@f702c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf702c000 0x0 0x1000>; + interrupts = <0 68 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 127 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio17: gpio@f702d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf702d000 0x0 0x1000>; + interrupts = <0 69 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 135 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio18: gpio@f702e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf702e000 0x0 0x1000>; + interrupts = <0 70 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 143 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio19: gpio@f702f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf702f000 0x0 0x1000>; + interrupts = <0 71 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 151 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + spi0: spi@f7106000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xf7106000 0x0 0x1000>; + interrupts = <0 50 4>; + bus-id = <0>; + enable-dma = <0>; + clocks = <&sys_ctrl HI6220_SPI_CLK>; + clock-names = "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pmx_func &spi0_cfg_func>; + num-cs = <1>; + cs-gpios = <&gpio6 2 0>; + status = "disabled"; + }; + + i2c0: i2c@f7100000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xf7100000 0x0 0x1000>; + interrupts = <0 44 4>; + clocks = <&sys_ctrl HI6220_I2C0_CLK>; + i2c-sda-hold-time-ns = <300>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; + status = "disabled"; + }; + + i2c1: i2c@f7101000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xf7101000 0x0 0x1000>; + clocks = <&sys_ctrl HI6220_I2C1_CLK>; + interrupts = <0 45 4>; + i2c-sda-hold-time-ns = <300>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>; + status = "disabled"; + }; + + i2c2: i2c@f7102000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xf7102000 0x0 0x1000>; + clocks = <&sys_ctrl HI6220_I2C2_CLK>; + interrupts = <0 46 4>; + i2c-sda-hold-time-ns = <300>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>; + status = "disabled"; + }; + + fixed_5v_hub: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed_5v_hub"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio0 7 0>; + regulator-always-on; + }; + + usb_phy: usbphy { + compatible = "hisilicon,hi6220-usb-phy"; + #phy-cells = <0>; + phy-supply = <&fixed_5v_hub>; + hisilicon,peripheral-syscon = <&sys_ctrl>; + }; + + usb: usb@f72c0000 { + compatible = "hisilicon,hi6220-usb"; + reg = <0x0 0xf72c0000 0x0 0x40000>; + phys = <&usb_phy>; + phy-names = "usb2-phy"; + clocks = <&sys_ctrl HI6220_USBOTG_HCLK>; + clock-names = "otg"; + dr_mode = "otg"; + g-use-dma; + g-rx-fifo-size = <512>; + g-np-tx-fifo-size = <128>; + g-tx-fifo-size = <128 128 128 128 128 128>; + interrupts = <0 77 0x4>; + }; + + mailbox: mailbox@f7510000 { + compatible = "hisilicon,hi6220-mbox"; + reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */ + <0x0 0x06dff800 0x0 0x0800>; /* Mailbox buffer */ + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <3>; + }; + + dwmmc_0: dwmmc0@f723d000 { + compatible = "hisilicon,hi6220-dw-mshc"; + num-slots = <0x1>; + cap-mmc-highspeed; + non-removable; + reg = <0x0 0xf723d000 0x0 0x1000>; + interrupts = <0x0 0x48 0x4>; + clocks = <&sys_ctrl 2>, <&sys_ctrl 1>; + clock-names = "ciu", "biu"; + bus-width = <0x8>; + vmmc-supply = <&ldo19>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pmx_func &emmc_clk_cfg_func + &emmc_cfg_func &emmc_rst_cfg_func>; + }; + + dwmmc_1: dwmmc1@f723e000 { + compatible = "hisilicon,hi6220-dw-mshc"; + num-slots = <0x1>; + card-detect-delay = <200>; + hisilicon,peripheral-syscon = <&ao_ctrl>; + cap-sd-highspeed; + reg = <0x0 0xf723e000 0x0 0x1000>; + interrupts = <0x0 0x49 0x4>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clocks = <&sys_ctrl 4>, <&sys_ctrl 3>; + clock-names = "ciu", "biu"; + vqmmc-supply = <&ldo7>; + vmmc-supply = <&ldo10>; + bus-width = <0x4>; + disable-wp; + cd-gpios = <&gpio1 0 1>; + pinctrl-names = "default", "idle"; + pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>; + pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>; + }; + + dwmmc_2: dwmmc2@f723f000 { + compatible = "hisilicon,hi6220-dw-mshc"; + num-slots = <0x1>; + reg = <0x0 0xf723f000 0x0 0x1000>; + interrupts = <0x0 0x4a 0x4>; + clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>; + clock-names = "ciu", "biu"; + bus-width = <0x4>; + broken-cd; + pinctrl-names = "default", "idle"; + pinctrl-0 = <&sdio_pmx_func &sdio_clk_cfg_func &sdio_cfg_func>; + pinctrl-1 = <&sdio_pmx_idle &sdio_clk_cfg_idle &sdio_cfg_idle>; + }; + + tsensor: tsensor@0,f7030700 { + compatible = "hisilicon,tsensor"; + reg = <0x0 0xf7030700 0x0 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_ctrl 22>; + clock-names = "thermal_clk"; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + + cls0: cls0 { + polling-delay = <1000>; + polling-delay-passive = <100>; + sustainable-power = <3326>; + + /* sensor ID */ + thermal-sensors = <&tsensor 2>; + + trips { + threshold: trip-point@0 { + temperature = <65000>; + hysteresis = <0>; + type = "passive"; + }; + + target: trip-point@1 { + temperature = <75000>; + hysteresis = <0>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi new file mode 100644 index 000000000000..0916e8459d6b --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi @@ -0,0 +1,705 @@ +/* + * pinctrl dts fils for Hislicon HiKey development board + * + */ +#include <dt-bindings/pinctrl/hisi.h> + +/ { + soc { + pmx0: pinmux@f7010000 { + pinctrl-names = "default"; + pinctrl-0 = < + &boot_sel_pmx_func + &hkadc_ssi_pmx_func + &codec_clk_pmx_func + &pwm_in_pmx_func + &bl_pwm_pmx_func + >; + + boot_sel_pmx_func: boot_sel_pmx_func { + pinctrl-single,pins = < + 0x0 MUX_M0 /* BOOT_SEL (IOMG000) */ + >; + }; + + emmc_pmx_func: emmc_pmx_func { + pinctrl-single,pins = < + 0x100 MUX_M0 /* EMMC_CLK (IOMG064) */ + 0x104 MUX_M0 /* EMMC_CMD (IOMG065) */ + 0x108 MUX_M0 /* EMMC_DATA0 (IOMG066) */ + 0x10c MUX_M0 /* EMMC_DATA1 (IOMG067) */ + 0x110 MUX_M0 /* EMMC_DATA2 (IOMG068) */ + 0x114 MUX_M0 /* EMMC_DATA3 (IOMG069) */ + 0x118 MUX_M0 /* EMMC_DATA4 (IOMG070) */ + 0x11c MUX_M0 /* EMMC_DATA5 (IOMG071) */ + 0x120 MUX_M0 /* EMMC_DATA6 (IOMG072) */ + 0x124 MUX_M0 /* EMMC_DATA7 (IOMG073) */ + >; + }; + + sd_pmx_func: sd_pmx_func { + pinctrl-single,pins = < + 0xc MUX_M0 /* SD_CLK (IOMG003) */ + 0x10 MUX_M0 /* SD_CMD (IOMG004) */ + 0x14 MUX_M0 /* SD_DATA0 (IOMG005) */ + 0x18 MUX_M0 /* SD_DATA1 (IOMG006) */ + 0x1c MUX_M0 /* SD_DATA2 (IOMG007) */ + 0x20 MUX_M0 /* SD_DATA3 (IOMG008) */ + >; + }; + sd_pmx_idle: sd_pmx_idle { + pinctrl-single,pins = < + 0xc MUX_M1 /* SD_CLK (IOMG003) */ + 0x10 MUX_M1 /* SD_CMD (IOMG004) */ + 0x14 MUX_M1 /* SD_DATA0 (IOMG005) */ + 0x18 MUX_M1 /* SD_DATA1 (IOMG006) */ + 0x1c MUX_M1 /* SD_DATA2 (IOMG007) */ + 0x20 MUX_M1 /* SD_DATA3 (IOMG008) */ + >; + }; + + sdio_pmx_func: sdio_pmx_func { + pinctrl-single,pins = < + 0x128 MUX_M0 /* SDIO_CLK (IOMG074) */ + 0x12c MUX_M0 /* SDIO_CMD (IOMG075) */ + 0x130 MUX_M0 /* SDIO_DATA0 (IOMG076) */ + 0x134 MUX_M0 /* SDIO_DATA1 (IOMG077) */ + 0x138 MUX_M0 /* SDIO_DATA2 (IOMG078) */ + 0x13c MUX_M0 /* SDIO_DATA3 (IOMG079) */ + >; + }; + sdio_pmx_idle: sdio_pmx_idle { + pinctrl-single,pins = < + 0x128 MUX_M1 /* SDIO_CLK (IOMG074) */ + 0x12c MUX_M1 /* SDIO_CMD (IOMG075) */ + 0x130 MUX_M1 /* SDIO_DATA0 (IOMG076) */ + 0x134 MUX_M1 /* SDIO_DATA1 (IOMG077) */ + 0x138 MUX_M1 /* SDIO_DATA2 (IOMG078) */ + 0x13c MUX_M1 /* SDIO_DATA3 (IOMG079) */ + >; + }; + + isp_pmx_func: isp_pmx_func { + pinctrl-single,pins = < + 0x24 MUX_M0 /* ISP_PWDN0 (IOMG009) */ + 0x28 MUX_M0 /* ISP_PWDN1 (IOMG010) */ + 0x2c MUX_M0 /* ISP_PWDN2 (IOMG011) */ + 0x30 MUX_M1 /* ISP_SHUTTER0 (IOMG012) */ + 0x34 MUX_M1 /* ISP_SHUTTER1 (IOMG013) */ + 0x38 MUX_M1 /* ISP_PWM (IOMG014) */ + 0x3c MUX_M0 /* ISP_CCLK0 (IOMG015) */ + 0x40 MUX_M0 /* ISP_CCLK1 (IOMG016) */ + 0x44 MUX_M0 /* ISP_RESETB0 (IOMG017) */ + 0x48 MUX_M0 /* ISP_RESETB1 (IOMG018) */ + 0x4c MUX_M1 /* ISP_STROBE0 (IOMG019) */ + 0x50 MUX_M1 /* ISP_STROBE1 (IOMG020) */ + 0x54 MUX_M0 /* ISP_SDA0 (IOMG021) */ + 0x58 MUX_M0 /* ISP_SCL0 (IOMG022) */ + 0x5c MUX_M0 /* ISP_SDA1 (IOMG023) */ + 0x60 MUX_M0 /* ISP_SCL1 (IOMG024) */ + >; + }; + + hkadc_ssi_pmx_func: hkadc_ssi_pmx_func { + pinctrl-single,pins = < + 0x68 MUX_M0 /* HKADC_SSI (IOMG026) */ + >; + }; + + codec_clk_pmx_func: codec_clk_pmx_func { + pinctrl-single,pins = < + 0x6c MUX_M0 /* CODEC_CLK (IOMG027) */ + >; + }; + + codec_pmx_func: codec_pmx_func { + pinctrl-single,pins = < + 0x70 MUX_M1 /* DMIC_CLK (IOMG028) */ + 0x74 MUX_M0 /* CODEC_SYNC (IOMG029) */ + 0x78 MUX_M0 /* CODEC_DI (IOMG030) */ + 0x7c MUX_M0 /* CODEC_DO (IOMG031) */ + >; + }; + + fm_pmx_func: fm_pmx_func { + pinctrl-single,pins = < + 0x80 MUX_M1 /* FM_XCLK (IOMG032) */ + 0x84 MUX_M1 /* FM_XFS (IOMG033) */ + 0x88 MUX_M1 /* FM_DI (IOMG034) */ + 0x8c MUX_M1 /* FM_DO (IOMG035) */ + >; + }; + + bt_pmx_func: bt_pmx_func { + pinctrl-single,pins = < + 0x90 MUX_M0 /* BT_XCLK (IOMG036) */ + 0x94 MUX_M0 /* BT_XFS (IOMG037) */ + 0x98 MUX_M0 /* BT_DI (IOMG038) */ + 0x9c MUX_M0 /* BT_DO (IOMG039) */ + >; + }; + + pwm_in_pmx_func: pwm_in_pmx_func { + pinctrl-single,pins = < + 0xb8 MUX_M1 /* PWM_IN (IOMG046) */ + >; + }; + + bl_pwm_pmx_func: bl_pwm_pmx_func { + pinctrl-single,pins = < + 0xbc MUX_M1 /* BL_PWM (IOMG047) */ + >; + }; + + uart0_pmx_func: uart0_pmx_func { + pinctrl-single,pins = < + 0xc0 MUX_M0 /* UART0_RXD (IOMG048) */ + 0xc4 MUX_M0 /* UART0_TXD (IOMG049) */ + >; + }; + + uart1_pmx_func: uart1_pmx_func { + pinctrl-single,pins = < + 0xc8 MUX_M0 /* UART1_CTS_N (IOMG050) */ + 0xcc MUX_M0 /* UART1_RTS_N (IOMG051) */ + 0xd0 MUX_M0 /* UART1_RXD (IOMG052) */ + 0xd4 MUX_M0 /* UART1_TXD (IOMG053) */ + >; + }; + + uart2_pmx_func: uart2_pmx_func { + pinctrl-single,pins = < + 0xd8 MUX_M0 /* UART2_CTS_N (IOMG054) */ + 0xdc MUX_M0 /* UART2_RTS_N (IOMG055) */ + 0xe0 MUX_M0 /* UART2_RXD (IOMG056) */ + 0xe4 MUX_M0 /* UART2_TXD (IOMG057) */ + >; + }; + + uart3_pmx_func: uart3_pmx_func { + pinctrl-single,pins = < + 0x180 MUX_M1 /* UART3_CTS_N (IOMG096) */ + 0x184 MUX_M1 /* UART3_RTS_N (IOMG097) */ + 0x188 MUX_M1 /* UART3_RXD (IOMG098) */ + 0x18c MUX_M1 /* UART3_TXD (IOMG099) */ + >; + }; + + uart4_pmx_func: uart4_pmx_func { + pinctrl-single,pins = < + 0x1d0 MUX_M1 /* UART4_CTS_N (IOMG116) */ + 0x1d4 MUX_M1 /* UART4_RTS_N (IOMG117) */ + 0x1d8 MUX_M1 /* UART4_RXD (IOMG118) */ + 0x1dc MUX_M1 /* UART4_TXD (IOMG119) */ + >; + }; + + uart5_pmx_func: uart5_pmx_func { + pinctrl-single,pins = < + 0x1c8 MUX_M1 /* UART5_RXD (IOMG114) */ + 0x1cc MUX_M1 /* UART5_TXD (IOMG115) */ + >; + }; + + i2c0_pmx_func: i2c0_pmx_func { + pinctrl-single,pins = < + 0xe8 MUX_M0 /* I2C0_SCL (IOMG058) */ + 0xec MUX_M0 /* I2C0_SDA (IOMG059) */ + >; + }; + + i2c1_pmx_func: i2c1_pmx_func { + pinctrl-single,pins = < + 0xf0 MUX_M0 /* I2C1_SCL (IOMG060) */ + 0xf4 MUX_M0 /* I2C1_SDA (IOMG061) */ + >; + }; + + i2c2_pmx_func: i2c2_pmx_func { + pinctrl-single,pins = < + 0xf8 MUX_M0 /* I2C2_SCL (IOMG062) */ + 0xfc MUX_M0 /* I2C2_SDA (IOMG063) */ + >; + }; + + spi0_pmx_func: spi0_pmx_func { + pinctrl-single,pins = < + 0x1a0 MUX_M1 /* SPI0_DI (IOMG104) */ + 0x1a4 MUX_M1 /* SPI0_DO (IOMG105) */ + 0x1a8 MUX_M1 /* SPI0_CS_N (IOMG106) */ + 0x1ac MUX_M1 /* SPI0_CLK (IOMG107) */ + >; + }; + }; + + pmx1: pinmux@f7010800 { + + pinctrl-names = "default"; + pinctrl-0 = < + &boot_sel_cfg_func + &hkadc_ssi_cfg_func + &codec_clk_cfg_func + &pwm_in_cfg_func + &bl_pwm_cfg_func + >; + + boot_sel_cfg_func: boot_sel_cfg_func { + pinctrl-single,pins = < + 0x0 0x0 /* BOOT_SEL (IOCFG000) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + hkadc_ssi_cfg_func: hkadc_ssi_cfg_func { + pinctrl-single,pins = < + 0x6c 0x0 /* HKADC_SSI (IOCFG027) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + emmc_clk_cfg_func: emmc_clk_cfg_func { + pinctrl-single,pins = < + 0x104 0x0 /* EMMC_CLK (IOCFG065) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>; + }; + + emmc_cfg_func: emmc_cfg_func { + pinctrl-single,pins = < + 0x108 0x0 /* EMMC_CMD (IOCFG066) */ + 0x10c 0x0 /* EMMC_DATA0 (IOCFG067) */ + 0x110 0x0 /* EMMC_DATA1 (IOCFG068) */ + 0x114 0x0 /* EMMC_DATA2 (IOCFG069) */ + 0x118 0x0 /* EMMC_DATA3 (IOCFG070) */ + 0x11c 0x0 /* EMMC_DATA4 (IOCFG071) */ + 0x120 0x0 /* EMMC_DATA5 (IOCFG072) */ + 0x124 0x0 /* EMMC_DATA6 (IOCFG073) */ + 0x128 0x0 /* EMMC_DATA7 (IOCFG074) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; + }; + + emmc_rst_cfg_func: emmc_rst_cfg_func { + pinctrl-single,pins = < + 0x12c 0x0 /* EMMC_RST_N (IOCFG075) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; + }; + + sd_clk_cfg_func: sd_clk_cfg_func { + pinctrl-single,pins = < + 0xc 0x0 /* SD_CLK (IOCFG003) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_10MA DRIVE_MASK>; + }; + sd_clk_cfg_idle: sd_clk_cfg_idle { + pinctrl-single,pins = < + 0xc 0x0 /* SD_CLK (IOCFG003) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + sd_cfg_func: sd_cfg_func { + pinctrl-single,pins = < + 0x10 0x0 /* SD_CMD (IOCFG004) */ + 0x14 0x0 /* SD_DATA0 (IOCFG005) */ + 0x18 0x0 /* SD_DATA1 (IOCFG006) */ + 0x1c 0x0 /* SD_DATA2 (IOCFG007) */ + 0x20 0x0 /* SD_DATA3 (IOCFG008) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>; + }; + sd_cfg_idle: sd_cfg_idle { + pinctrl-single,pins = < + 0x10 0x0 /* SD_CMD (IOCFG004) */ + 0x14 0x0 /* SD_DATA0 (IOCFG005) */ + 0x18 0x0 /* SD_DATA1 (IOCFG006) */ + 0x1c 0x0 /* SD_DATA2 (IOCFG007) */ + 0x20 0x0 /* SD_DATA3 (IOCFG008) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + sdio_clk_cfg_func: sdio_clk_cfg_func { + pinctrl-single,pins = < + 0x134 0x0 /* SDIO_CLK (IOCFG077) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>; + }; + sdio_clk_cfg_idle: sdio_clk_cfg_idle { + pinctrl-single,pins = < + 0x134 0x0 /* SDIO_CLK (IOCFG077) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + sdio_cfg_func: sdio_cfg_func { + pinctrl-single,pins = < + 0x138 0x0 /* SDIO_CMD (IOCFG078) */ + 0x13c 0x0 /* SDIO_DATA0 (IOCFG079) */ + 0x140 0x0 /* SDIO_DATA1 (IOCFG080) */ + 0x144 0x0 /* SDIO_DATA2 (IOCFG081) */ + 0x148 0x0 /* SDIO_DATA3 (IOCFG082) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; + }; + sdio_cfg_idle: sdio_cfg_idle { + pinctrl-single,pins = < + 0x138 0x0 /* SDIO_CMD (IOCFG078) */ + 0x13c 0x0 /* SDIO_DATA0 (IOCFG079) */ + 0x140 0x0 /* SDIO_DATA1 (IOCFG080) */ + 0x144 0x0 /* SDIO_DATA2 (IOCFG081) */ + 0x148 0x0 /* SDIO_DATA3 (IOCFG082) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + isp_cfg_func1: isp_cfg_func1 { + pinctrl-single,pins = < + 0x28 0x0 /* ISP_PWDN0 (IOCFG010) */ + 0x2c 0x0 /* ISP_PWDN1 (IOCFG011) */ + 0x30 0x0 /* ISP_PWDN2 (IOCFG012) */ + 0x34 0x0 /* ISP_SHUTTER0 (IOCFG013) */ + 0x38 0x0 /* ISP_SHUTTER1 (IOCFG014) */ + 0x3c 0x0 /* ISP_PWM (IOCFG015) */ + 0x40 0x0 /* ISP_CCLK0 (IOCFG016) */ + 0x44 0x0 /* ISP_CCLK1 (IOCFG017) */ + 0x48 0x0 /* ISP_RESETB0 (IOCFG018) */ + 0x4c 0x0 /* ISP_RESETB1 (IOCFG019) */ + 0x50 0x0 /* ISP_STROBE0 (IOCFG020) */ + 0x58 0x0 /* ISP_SDA0 (IOCFG022) */ + 0x5c 0x0 /* ISP_SCL0 (IOCFG023) */ + 0x60 0x0 /* ISP_SDA1 (IOCFG024) */ + 0x64 0x0 /* ISP_SCL1 (IOCFG025) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + isp_cfg_idle1: isp_cfg_idle1 { + pinctrl-single,pins = < + 0x34 0x0 /* ISP_SHUTTER0 (IOCFG013) */ + 0x38 0x0 /* ISP_SHUTTER1 (IOCFG014) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + isp_cfg_func2: isp_cfg_func2 { + pinctrl-single,pins = < + 0x54 0x0 /* ISP_STROBE1 (IOCFG021) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + codec_clk_cfg_func: codec_clk_cfg_func { + pinctrl-single,pins = < + 0x70 0x0 /* CODEC_CLK (IOCFG028) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; + }; + codec_clk_cfg_idle: codec_clk_cfg_idle { + pinctrl-single,pins = < + 0x70 0x0 /* CODEC_CLK (IOCFG028) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + codec_cfg_func1: codec_cfg_func1 { + pinctrl-single,pins = < + 0x74 0x0 /* DMIC_CLK (IOCFG029) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + codec_cfg_func2: codec_cfg_func2 { + pinctrl-single,pins = < + 0x78 0x0 /* CODEC_SYNC (IOCFG030) */ + 0x7c 0x0 /* CODEC_DI (IOCFG031) */ + 0x80 0x0 /* CODEC_DO (IOCFG032) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; + }; + codec_cfg_idle2: codec_cfg_idle2 { + pinctrl-single,pins = < + 0x78 0x0 /* CODEC_SYNC (IOCFG030) */ + 0x7c 0x0 /* CODEC_DI (IOCFG031) */ + 0x80 0x0 /* CODEC_DO (IOCFG032) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + fm_cfg_func: fm_cfg_func { + pinctrl-single,pins = < + 0x84 0x0 /* FM_XCLK (IOCFG033) */ + 0x88 0x0 /* FM_XFS (IOCFG034) */ + 0x8c 0x0 /* FM_DI (IOCFG035) */ + 0x90 0x0 /* FM_DO (IOCFG036) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + bt_cfg_func: bt_cfg_func { + pinctrl-single,pins = < + 0x94 0x0 /* BT_XCLK (IOCFG037) */ + 0x98 0x0 /* BT_XFS (IOCFG038) */ + 0x9c 0x0 /* BT_DI (IOCFG039) */ + 0xa0 0x0 /* BT_DO (IOCFG040) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + bt_cfg_idle: bt_cfg_idle { + pinctrl-single,pins = < + 0x94 0x0 /* BT_XCLK (IOCFG037) */ + 0x98 0x0 /* BT_XFS (IOCFG038) */ + 0x9c 0x0 /* BT_DI (IOCFG039) */ + 0xa0 0x0 /* BT_DO (IOCFG040) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + pwm_in_cfg_func: pwm_in_cfg_func { + pinctrl-single,pins = < + 0xbc 0x0 /* PWM_IN (IOCFG047) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + bl_pwm_cfg_func: bl_pwm_cfg_func { + pinctrl-single,pins = < + 0xc0 0x0 /* BL_PWM (IOCFG048) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + uart0_cfg_func1: uart0_cfg_func1 { + pinctrl-single,pins = < + 0xc4 0x0 /* UART0_RXD (IOCFG049) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + uart0_cfg_func2: uart0_cfg_func2 { + pinctrl-single,pins = < + 0xc8 0x0 /* UART0_TXD (IOCFG050) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; + }; + + uart1_cfg_func1: uart1_cfg_func1 { + pinctrl-single,pins = < + 0xcc 0x0 /* UART1_CTS_N (IOCFG051) */ + 0xd4 0x0 /* UART1_RXD (IOCFG053) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + uart1_cfg_func2: uart1_cfg_func2 { + pinctrl-single,pins = < + 0xd0 0x0 /* UART1_RTS_N (IOCFG052) */ + 0xd8 0x0 /* UART1_TXD (IOCFG054) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + uart2_cfg_func: uart2_cfg_func { + pinctrl-single,pins = < + 0xdc 0x0 /* UART2_CTS_N (IOCFG055) */ + 0xe0 0x0 /* UART2_RTS_N (IOCFG056) */ + 0xe4 0x0 /* UART2_RXD (IOCFG057) */ + 0xe8 0x0 /* UART2_TXD (IOCFG058) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + uart3_cfg_func: uart3_cfg_func { + pinctrl-single,pins = < + 0x190 0x0 /* UART3_CTS_N (IOCFG100) */ + 0x194 0x0 /* UART3_RTS_N (IOCFG101) */ + 0x198 0x0 /* UART3_RXD (IOCFG102) */ + 0x19c 0x0 /* UART3_TXD (IOCFG103) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + uart4_cfg_func: uart4_cfg_func { + pinctrl-single,pins = < + 0x1e0 0x0 /* UART4_CTS_N (IOCFG120) */ + 0x1e4 0x0 /* UART4_RTS_N (IOCFG121) */ + 0x1e8 0x0 /* UART4_RXD (IOCFG122) */ + 0x1ec 0x0 /* UART4_TXD (IOCFG123) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + uart5_cfg_func: uart5_cfg_func { + pinctrl-single,pins = < + 0x1d8 0x0 /* UART4_RXD (IOCFG118) */ + 0x1dc 0x0 /* UART4_TXD (IOCFG119) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + i2c0_cfg_func: i2c0_cfg_func { + pinctrl-single,pins = < + 0xec 0x0 /* I2C0_SCL (IOCFG059) */ + 0xf0 0x0 /* I2C0_SDA (IOCFG060) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + i2c1_cfg_func: i2c1_cfg_func { + pinctrl-single,pins = < + 0xf4 0x0 /* I2C1_SCL (IOCFG061) */ + 0xf8 0x0 /* I2C1_SDA (IOCFG062) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + i2c2_cfg_func: i2c2_cfg_func { + pinctrl-single,pins = < + 0xfc 0x0 /* I2C2_SCL (IOCFG063) */ + 0x100 0x0 /* I2C2_SDA (IOCFG064) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + spi0_cfg_func: spi0_cfg_func { + pinctrl-single,pins = < + 0x1b0 0x0 /* SPI0_DI (IOCFG108) */ + 0x1b4 0x0 /* SPI0_DO (IOCFG109) */ + 0x1b8 0x0 /* SPI0_CS_N (IOCFG110) */ + 0x1bc 0x0 /* SPI0_CLK (IOCFG111) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + }; + + pmx2: pinmux@f8001800 { + + pinctrl-names = "default"; + pinctrl-0 = < + &rstout_n_cfg_func + >; + + rstout_n_cfg_func: rstout_n_cfg_func { + pinctrl-single,pins = < + 0x0 0x0 /* RSTOUT_N (IOCFG000) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + pmu_peri_en_cfg_func: pmu_peri_en_cfg_func { + pinctrl-single,pins = < + 0x4 0x0 /* PMU_PERI_EN (IOCFG001) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + sysclk0_en_cfg_func: sysclk0_en_cfg_func { + pinctrl-single,pins = < + 0x8 0x0 /* SYSCLK0_EN (IOCFG002) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + jtag_tdo_cfg_func: jtag_tdo_cfg_func { + pinctrl-single,pins = < + 0xc 0x0 /* JTAG_TDO (IOCFG003) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>; + }; + + rf_reset_cfg_func: rf_reset_cfg_func { + pinctrl-single,pins = < + 0x70 0x0 /* RF_RESET0 (IOCFG028) */ + 0x74 0x0 /* RF_RESET1 (IOCFG029) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts index e9436c0d81f7..abba750b87f8 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts +++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts @@ -52,3 +52,37 @@ &peri_gpio0 { status = "ok"; }; + +&lbc { + status = "ok"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x0 0x90000000 0x08000000>, + <1 0 0x0 0x98000000 0x08000000>; + + nor-flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "numonyx,js28f00a", "cfi-flash"; + reg = <0 0x0 0x08000000>; + bank-width = <2>; + /* The three parts may not used */ + partition@0 { + label = "BIOS"; + reg = <0x0 0x300000>; + }; + partition@300000 { + label = "Linux"; + reg = <0x300000 0xa00000>; + }; + partition@1000000 { + label = "Rootfs"; + reg = <0x01000000 0x02000000>; + }; + }; + + cpld@1,0 { + compatible = "hisilicon,hip05-cpld"; + reg = <1 0x0 0x100>; + }; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi index 6319ff3b03ea..bf322ed038b8 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi @@ -249,24 +249,28 @@ its_peri: interrupt-controller@8c000000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0x8c000000 0x0 0x40000>; }; its_m3: interrupt-controller@a3000000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0xa3000000 0x0 0x40000>; }; its_pcie: interrupt-controller@b7000000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0xb7000000 0x0 0x40000>; }; its_dsa: interrupt-controller@c6000000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0xc6000000 0x0 0x40000>; }; }; @@ -323,6 +327,12 @@ status = "disabled"; }; + lbc: localbus@80380000 { + compatible = "hisilicon,hisi-localbus", "simple-bus"; + reg = <0x0 0x80380000 0x0 0x10000>; + status = "disabled"; + }; + peri_gpio0: gpio@802e0000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts new file mode 100644 index 000000000000..f3e5323e430b --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts @@ -0,0 +1,34 @@ +/** + * dts file for Hisilicon D03 Development Board + * + * Copyright (C) 2016 Hisilicon Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + */ + +/dts-v1/; + +#include "hip06.dtsi" + +/ { + model = "Hisilicon Hip06 D03 Development Board"; + compatible = "hisilicon,hip06-d03"; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x00000000 0x0 0x40000000>; + }; + + chosen { }; +}; + +&usb_ohci { + status = "ok"; +}; + +&usb_ehci { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi new file mode 100644 index 000000000000..5927bc472f1b --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi @@ -0,0 +1,307 @@ +/** + * dts file for Hisilicon D03 Development Board + * + * Copyright (C) 2016 Hisilicon Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "hisilicon,hip06-d03"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + cluster2 { + core0 { + cpu = <&cpu8>; + }; + core1 { + cpu = <&cpu9>; + }; + core2 { + cpu = <&cpu10>; + }; + core3 { + cpu = <&cpu11>; + }; + }; + cluster3 { + core0 { + cpu = <&cpu12>; + }; + core1 { + cpu = <&cpu13>; + }; + core2 { + cpu = <&cpu14>; + }; + core3 { + cpu = <&cpu15>; + }; + }; + }; + + cpu0: cpu@10000 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x10000>; + enable-method = "psci"; + next-level-cache = <&cluster0_l2>; + }; + + cpu1: cpu@10001 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x10001>; + enable-method = "psci"; + next-level-cache = <&cluster0_l2>; + }; + + cpu2: cpu@10002 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x10002>; + enable-method = "psci"; + next-level-cache = <&cluster0_l2>; + }; + + cpu3: cpu@10003 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x10003>; + enable-method = "psci"; + next-level-cache = <&cluster0_l2>; + }; + + cpu4: cpu@10100 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x10100>; + enable-method = "psci"; + next-level-cache = <&cluster1_l2>; + }; + + cpu5: cpu@10101 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x10101>; + enable-method = "psci"; + next-level-cache = <&cluster1_l2>; + }; + + cpu6: cpu@10102 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x10102>; + enable-method = "psci"; + next-level-cache = <&cluster1_l2>; + }; + + cpu7: cpu@10103 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x10103>; + enable-method = "psci"; + next-level-cache = <&cluster1_l2>; + }; + + cpu8: cpu@10200 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x10200>; + enable-method = "psci"; + next-level-cache = <&cluster2_l2>; + }; + + cpu9: cpu@10201 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x10201>; + enable-method = "psci"; + next-level-cache = <&cluster2_l2>; + }; + + cpu10: cpu@10202 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x10202>; + enable-method = "psci"; + next-level-cache = <&cluster2_l2>; + }; + + cpu11: cpu@10203 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x10203>; + enable-method = "psci"; + next-level-cache = <&cluster2_l2>; + }; + + cpu12: cpu@10300 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x10300>; + enable-method = "psci"; + next-level-cache = <&cluster3_l2>; + }; + + cpu13: cpu@10301 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x10301>; + enable-method = "psci"; + next-level-cache = <&cluster3_l2>; + }; + + cpu14: cpu@10302 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x10302>; + enable-method = "psci"; + next-level-cache = <&cluster3_l2>; + }; + + cpu15: cpu@10303 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x10303>; + enable-method = "psci"; + next-level-cache = <&cluster3_l2>; + }; + + cluster0_l2: l2-cache0 { + compatible = "cache"; + }; + + cluster1_l2: l2-cache1 { + compatible = "cache"; + }; + + cluster2_l2: l2-cache2 { + compatible = "cache"; + }; + + cluster3_l2: l2-cache3 { + compatible = "cache"; + }; + }; + + gic: interrupt-controller@4d000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x30000>; + reg = <0x0 0x4d000000 0 0x10000>, /* GICD */ + <0x0 0x4d100000 0 0x300000>, /* GICR */ + <0x0 0xfe000000 0 0x10000>, /* GICC */ + <0x0 0xfe010000 0 0x10000>, /* GICH */ + <0x0 0xfe020000 0 0x10000>; /* GICV */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + its_dsa: interrupt-controller@c6000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0xc6000000 0x0 0x40000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu { + compatible = "arm,cortex-a57-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + mbigen_pcie@a0080000 { + compatible = "hisilicon,mbigen-v2"; + reg = <0x0 0xa0080000 0x0 0x10000>; + + mbigen_usb: intc_usb { + msi-parent = <&its_dsa 0x40080>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <2>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + usb_ohci: ohci@a7030000 { + compatible = "generic-ohci"; + reg = <0x0 0xa7030000 0x0 0x10000>; + interrupt-parent = <&mbigen_usb>; + interrupts = <64 4>; + dma-coherent; + status = "disabled"; + }; + + usb_ehci: ehci@a7020000 { + compatible = "generic-ehci"; + reg = <0x0 0xa7020000 0x0 0x10000>; + interrupt-parent = <&mbigen_usb>; + interrupts = <65 4>; + dma-coherent; + status = "disabled"; + }; + }; + +}; diff --git a/arch/arm64/boot/dts/lg/Makefile b/arch/arm64/boot/dts/lg/Makefile new file mode 100644 index 000000000000..b0cc64964171 --- /dev/null +++ b/arch/arm64/boot/dts/lg/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_LG1K) += lg1312-ref.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/lg/lg1312-ref.dts b/arch/arm64/boot/dts/lg/lg1312-ref.dts new file mode 100644 index 000000000000..6d78d6bc7f9c --- /dev/null +++ b/arch/arm64/boot/dts/lg/lg1312-ref.dts @@ -0,0 +1,36 @@ +/* + * dts file for lg1312 Reference Board. + * + * Copyright (C) 2016, LG Electronics + */ + +/dts-v1/; + +#include "lg1312.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <1>; + + model = "LG Electronics, DTV SoC LG1312 Reference Board"; + compatible = "lge,lg1312-ref", "lge,lg1312"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x00000000 0x20000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi new file mode 100644 index 000000000000..3a4e9a2ab313 --- /dev/null +++ b/arch/arm64/boot/dts/lg/lg1312.dtsi @@ -0,0 +1,351 @@ +/* + * dts file for lg1312 SoC + * + * Copyright (C) 2016, LG Electronics + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + + compatible = "lge,lg1312"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + psci { + compatible = "arm,psci-0.2", "arm,psci"; + method = "smc"; + cpu_suspend = <0x84000001>; + cpu_off = <0x84000002>; + cpu_on = <0x84000003>; + }; + + gic: interrupt-controller@c0001000 { + #interrupt-cells = <3>; + compatible = "arm,gic-400"; + interrupt-controller; + reg = <0x0 0xc0001000 0x1000>, + <0x0 0xc0002000 0x2000>, + <0x0 0xc0004000 0x2000>, + <0x0 0xc0006000 0x2000>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + clk_bus: clk_bus { + #clock-cells = <0>; + + compatible = "fixed-clock"; + clock-frequency = <198000000>; + clock-output-names = "BUSCLK"; + }; + + soc { + #address-cells = <2>; + #size-cells = <1>; + + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + eth0: ethernet@c1b00000 { + compatible = "cdns,gem"; + reg = <0x0 0xc1b00000 0x1000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>, <&clk_bus>; + clock-names = "hclk", "pclk"; + phy-mode = "rmii"; + /* Filled in by boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + + amba { + #address-cells = <2>; + #size-cells = <1>; + #interrupts-cells = <3>; + + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges; + + timers: timer@fd100000 { + compatible = "arm,sp804"; + reg = <0x0 0xfd100000 0x1000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + wdog: watchdog@fd200000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xfd200000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + uart0: serial@fe000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfe000000 0x1000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + uart1: serial@fe100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfe100000 0x1000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + uart2: serial@fe200000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfe200000 0x1000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + spi0: ssp@fe800000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xfe800000 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + spi1: ssp@fe900000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xfe900000 0x1000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + dmac0: dma@c1128000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xc1128000 0x1000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + gpio0: gpio@fd400000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd400000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio1: gpio@fd410000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd410000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio2: gpio@fd420000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd420000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio3: gpio@fd430000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd430000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + gpio4: gpio@fd440000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd440000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio5: gpio@fd450000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd450000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio6: gpio@fd460000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd460000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio7: gpio@fd470000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd470000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio8: gpio@fd480000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd480000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio9: gpio@fd490000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd490000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio10: gpio@fd4a0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4a0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio11: gpio@fd4b0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4b0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + gpio12: gpio@fd4c0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4c0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio13: gpio@fd4d0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4d0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio14: gpio@fd4e0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4e0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio15: gpio@fd4f0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4f0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio16: gpio@fd500000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd500000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio17: gpio@fd510000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd510000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 359050154511..86110a6ae330 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -60,27 +60,19 @@ device_type = "memory"; reg = <0x00000000 0x00000000 0x00000000 0x20000000>; }; +}; - soc { - internal-regs { - /* - * Exported on the micro USB connector CON32 - * through an FTDI - */ - uart0: serial@12000 { - status = "okay"; - }; - - /* CON31 */ - usb3@58000 { - status = "okay"; - }; +/* CON3 */ +&sata { + status = "okay"; +}; - /* CON3 */ - sata@e0000 { - status = "okay"; - }; - }; - }; +/* Exported on the micro USB connector CON32 through an FTDI */ +&uart0 { + status = "okay"; }; +/* CON31 */ +&usb3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi index f292a00ce97c..5120296596c2 100644 --- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi @@ -59,5 +59,4 @@ enable-method = "psci"; }; }; - }; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index ba9df7ff2a72..9e2efb882983 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -105,14 +105,28 @@ status = "disabled"; }; - usb3@58000 { - compatible = "generic-xhci"; + usb3: usb@58000 { + compatible = "marvell,armada3700-xhci", + "generic-xhci"; reg = <0x58000 0x4000>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; - sata@e0000 { + xor@60900 { + compatible = "marvell,armada-3700-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + + xor10 { + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + }; + xor11 { + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + sata: sata@e0000 { compatible = "marvell,armada-3700-ahci"; reg = <0xe0000 0x2000>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/marvell/armada-7020.dtsi b/arch/arm64/boot/dts/marvell/armada-7020.dtsi index 52575756d0be..975e73302753 100644 --- a/arch/arm64/boot/dts/marvell/armada-7020.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-7020.dtsi @@ -46,6 +46,7 @@ */ #include "armada-ap806-dual.dtsi" +#include "armada-cp110-master.dtsi" / { model = "Marvell Armada 7020"; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index 064a251346dd..070b589680c5 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -51,42 +51,98 @@ compatible = "marvell,armada7040-db", "marvell,armada7040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory@00000000 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; - ap806 { - config-space { - spi@510600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q128a13"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <10000000>; - - partition@0 { - label = "U-Boot"; - reg = <0 0x200000>; - }; - partition@400000 { - label = "Filesystem"; - reg = <0x200000 0xce0000>; - }; - }; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@400000 { + label = "Filesystem"; + reg = <0x200000 0xce0000>; }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; - i2c@511000 { - status = "okay"; - clock-frequency = <100000>; + +&cpm_pcie2 { + status = "okay"; +}; + +&cpm_i2c0 { + status = "okay"; + clock-frequency = <100000>; +}; + +&cpm_spi1 { + status = "okay"; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x200000>; }; - serial@512000 { - status = "okay"; + partition@400000 { + label = "Filesystem"; + reg = <0x200000 0xe00000>; }; }; }; }; + +&cpm_sata0 { + status = "okay"; +}; + +&cpm_usb3_0 { + status = "okay"; +}; + +&cpm_usb3_1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi index 7a2de8bf7907..78d995d62707 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi @@ -46,6 +46,7 @@ */ #include "armada-ap806-quad.dtsi" +#include "armada-cp110-master.dtsi" / { model = "Marvell Armada 7040"; diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi index 73d69d99513f..3753c1c6d54d 100644 --- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi @@ -46,6 +46,7 @@ */ #include "armada-ap806-dual.dtsi" +#include "armada-cp110-master.dtsi" / { model = "Marvell Armada 8020"; diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi index a1406a40959e..8bd0d8f8ad4c 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi @@ -46,6 +46,7 @@ */ #include "armada-ap806-quad.dtsi" +#include "armada-cp110-master.dtsi" / { model = "Marvell Armada 8040"; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi index f25c5c17fad7..95a1ff60f6c1 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi @@ -68,4 +68,3 @@ }; }; }; - diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi index baa7d9a516b3..ba43a4357b89 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi @@ -79,6 +79,4 @@ enable-method = "psci"; }; }; - }; - diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 556a92bcc2f6..20d256b32670 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -54,12 +54,16 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; }; - ap806 { #address-cells = <2>; #size-cells = <2>; @@ -136,7 +140,7 @@ marvell,spi-base = <128>, <136>, <144>, <152>; }; - xor0@400000 { + xor@400000 { compatible = "marvell,mv-xor-v2"; reg = <0x400000 0x1000>, <0x410000 0x1000>; @@ -144,7 +148,7 @@ dma-coherent; }; - xor1@420000 { + xor@420000 { compatible = "marvell,mv-xor-v2"; reg = <0x420000 0x1000>, <0x430000 0x1000>; @@ -152,7 +156,7 @@ dma-coherent; }; - xor2@440000 { + xor@440000 { compatible = "marvell,mv-xor-v2"; reg = <0x440000 0x1000>, <0x450000 0x1000>; @@ -160,7 +164,7 @@ dma-coherent; }; - xor3@460000 { + xor@460000 { compatible = "marvell,mv-xor-v2"; reg = <0x460000 0x1000>, <0x470000 0x1000>; @@ -175,63 +179,51 @@ #size-cells = <0>; cell-index = <0>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ringclk 2>; + clocks = <&ap_syscon 3>; status = "disabled"; }; i2c0: i2c@511000 { - compatible = "marvell,mv64xxx-i2c"; + compatible = "marvell,mv78230-i2c"; reg = <0x511000 0x20>; #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; timeout-ms = <1000>; - clocks = <&ringclk 2>; + clocks = <&ap_syscon 3>; status = "disabled"; }; - serial@512000 { + uart0: serial@512000 { compatible = "snps,dw-apb-uart"; reg = <0x512000 0x100>; reg-shift = <2>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; - clocks = <&ringclk 2>; + clocks = <&ap_syscon 3>; status = "disabled"; }; - serial@512100 { + uart1: serial@512100 { compatible = "snps,dw-apb-uart"; reg = <0x512100 0x100>; reg-shift = <2>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; - clocks = <&ringclk 2>; + clocks = <&ap_syscon 3>; status = "disabled"; }; - dfx-server@6f8000 { - compatible = "simple-mfd", "syscon"; - reg = <0x6f8000 0x70000>; - - coreclk: clk@204 { - compatible = "marvell,armada-ap806-core-clock"; - #clock-cells = <1>; - clock-output-names = "ddr", "ring", "cpu"; - }; - - ringclk: clk@250 { - compatible = "marvell,armada-ap806-ring-clock"; - #clock-cells = <1>; - clock-output-names = "ring-0", "ring-2", - "ring-3", "ring-4", - "ring-5"; - clocks = <&coreclk 1>; - }; + ap_syscon: system-controller@6f4000 { + compatible = "marvell,ap806-system-controller", + "syscon"; + #clock-cells = <1>; + clock-output-names = "ap-cpu-cluster-0", + "ap-cpu-cluster-1", + "ap-fixed", "ap-mss"; + reg = <0x6f4000 0x1000>; }; }; }; - }; - diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi new file mode 100644 index 000000000000..367138bae3e0 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -0,0 +1,228 @@ +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Device Tree file for Marvell Armada CP110 Master. + */ + +/ { + cp110-master { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + config-space { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges = <0x0 0x0 0xf2000000 0x2000000>; + + cpm_syscon0: system-controller@440000 { + compatible = "marvell,cp110-system-controller0", + "syscon"; + reg = <0x440000 0x1000>; + #clock-cells = <2>; + core-clock-output-names = + "cpm-apll", "cpm-ppv2-core", "cpm-eip", + "cpm-core", "cpm-nand-core"; + gate-clock-output-names = + "cpm-audio", "cpm-communit", "cpm-nand", + "cpm-ppv2", "cpm-sdio", "cpm-mg-domain", + "cpm-mg-core", "cpm-xor1", "cpm-xor0", + "cpm-gop-dp", "none", "cpm-pcie_x10", + "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", + "cpm-sata", "cpm-sata-usb", "cpm-main", + "cpm-sd-mmc", "none", "none", + "cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1", + "cpm-usb3dev", "cpm-eip150", "cpm-eip197"; + }; + + cpm_sata0: sata@540000 { + compatible = "marvell,armada-8k-ahci"; + reg = <0x540000 0x30000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_syscon0 1 15>; + status = "disabled"; + }; + + cpm_usb3_0: usb3@500000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x500000 0x4000>; + dma-coherent; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_syscon0 1 22>; + status = "disabled"; + }; + + cpm_usb3_1: usb3@510000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x510000 0x4000>; + dma-coherent; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_syscon0 1 23>; + status = "disabled"; + }; + + cpm_spi0: spi@700600 { + compatible = "marvell,armada-380-spi"; + reg = <0x700600 0x50>; + #address-cells = <0x1>; + #size-cells = <0x0>; + cell-index = <1>; + clocks = <&cpm_syscon0 0 3>; + status = "disabled"; + }; + + cpm_spi1: spi@700680 { + compatible = "marvell,armada-380-spi"; + reg = <0x700680 0x50>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <2>; + clocks = <&cpm_syscon0 1 21>; + status = "disabled"; + }; + + cpm_i2c0: i2c@701000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_syscon0 1 21>; + status = "disabled"; + }; + + cpm_i2c1: i2c@701100 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_syscon0 1 21>; + status = "disabled"; + }; + }; + + cpm_pcie0: pcie@f2600000 { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 0xf2600000 0 0x10000>, + <0 0xf6f00000 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + + bus-range = <0 0xff>; + ranges = + /* downstream I/O */ + <0x81000000 0 0xf9000000 0 0xf9000000 0 0x10000 + /* non-prefetchable memory */ + 0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + num-lanes = <1>; + clocks = <&cpm_syscon0 1 13>; + status = "disabled"; + }; + + cpm_pcie1: pcie@f2620000 { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 0xf2620000 0 0x10000>, + <0 0xf7f00000 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + + bus-range = <0 0xff>; + ranges = + /* downstream I/O */ + <0x81000000 0 0xf9010000 0 0xf9010000 0 0x10000 + /* non-prefetchable memory */ + 0x82000000 0 0xf7000000 0 0xf7000000 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clocks = <&cpm_syscon0 1 11>; + status = "disabled"; + }; + + cpm_pcie2: pcie@f2640000 { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 0xf2640000 0 0x10000>, + <0 0xf8f00000 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + + bus-range = <0 0xff>; + ranges = + /* downstream I/O */ + <0x81000000 0 0xf9020000 0 0xf9020000 0 0x10000 + /* non-prefetchable memory */ + 0x82000000 0 0xf8000000 0 0xf8000000 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clocks = <&cpm_syscon0 1 12>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index eab7efc2302d..05f89c4a5413 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -125,6 +125,49 @@ clock-output-names = "cpum_ck"; }; + thermal-zones { + cpu_thermal: cpu_thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + thermal-sensors = <&thermal>; + sustainable-power = <1500>; /* milliwatts */ + + trips { + threshold: trip-point@0 { + temperature = <68000>; + hysteresis = <2000>; + type = "passive"; + }; + + target: trip-point@1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit@0 { + temperature = <115000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map@0 { + trip = <&target>; + cooling-device = <&cpu0 0 0>; + contribution = <1024>; + }; + map@1 { + trip = <&target>; + cooling-device = <&cpu2 0 0>; + contribution = <2048>; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; @@ -313,6 +356,11 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + auxadc: auxadc@11001000 { + compatible = "mediatek,mt8173-auxadc"; + reg = <0 0x11001000 0 0x1000>; + }; + uart0: serial@11002000 { compatible = "mediatek,mt8173-uart", "mediatek,mt6577-uart"; @@ -414,6 +462,18 @@ status = "disabled"; }; + thermal: thermal@1100b000 { + #thermal-sensor-cells = <0>; + compatible = "mediatek,mt8173-thermal"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; + clock-names = "therm", "auxadc"; + resets = <&pericfg MT8173_PERI_THERM_SW_RST>; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + }; + nor_flash: spi@1100d000 { compatible = "mediatek,mt8173-nor"; reg = <0 0x1100d000 0 0xe0>; diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index a7e865da1005..0f7cdf3e05c1 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb +dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb always := $(dtb-y) clean-files := *.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index 62f33fc84e3e..759af96a6b49 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -8,19 +8,22 @@ compatible = "nvidia,norrin", "nvidia,tegra132", "nvidia,tegra124"; aliases { - rtc0 = "/i2c@0,7000d000/as3722@40"; - rtc1 = "/rtc@0,7000e000"; + rtc0 = "/i2c@7000d000/as3722@40"; + rtc1 = "/rtc@7000e000"; + serial0 = &uarta; }; - chosen { }; + chosen { + stdout-path = "serial0:115200n8"; + }; memory { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; }; - host1x@0,50000000 { - hdmi@0,54280000 { + host1x@50000000 { + hdmi@54280000 { status = "disabled"; vdd-supply = <&vdd_3v3_hdmi>; @@ -32,26 +35,26 @@ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; }; - sor@0,54540000 { + sor@54540000 { status = "okay"; nvidia,dpaux = <&dpaux>; nvidia,panel = <&panel>; }; - dpaux: dpaux@0,545c0000 { + dpaux: dpaux@545c0000 { vdd-supply = <&vdd_3v3_panel>; status = "okay"; }; }; - gpu@0,57000000 { + gpu@57000000 { status = "okay"; vdd-supply = <&vdd_gpu>; }; - pinmux@0,70000868 { + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&pinmux_default>; @@ -523,21 +526,21 @@ }; }; - serial@0,70006000 { + serial@70006000 { status = "okay"; }; - pwm: pwm@0,7000a000 { + pwm: pwm@7000a000 { status = "okay"; }; /* HDMI DDC */ - hdmi_ddc: i2c@0,7000c700 { + hdmi_ddc: i2c@7000c700 { status = "okay"; clock-frequency = <100000>; }; - i2c@0,7000d000 { + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; @@ -744,7 +747,7 @@ }; }; - spi@0,7000d400 { + spi@7000d400 { status = "okay"; ec: cros-ec@0 { @@ -876,7 +879,7 @@ }; }; - pmc@0,7000e400 { + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <0>; #wake-cells = <3>; @@ -890,12 +893,12 @@ }; /* WIFI/BT module */ - sdhci@0,700b0000 { + sdhci@700b0000 { status = "disabled"; }; /* external SD/MMC */ - sdhci@0,700b0400 { + sdhci@700b0400 { cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>; @@ -905,35 +908,35 @@ }; /* EMMC 4.51 */ - sdhci@0,700b0600 { + sdhci@700b0600 { status = "okay"; bus-width = <8>; non-removable; }; - usb@0,7d000000 { + usb@7d000000 { status = "okay"; }; - usb-phy@0,7d000000 { + usb-phy@7d000000 { status = "okay"; vbus-supply = <&vdd_usb1_vbus>; }; - usb@0,7d004000 { + usb@7d004000 { status = "okay"; }; - usb-phy@0,7d004000 { + usb-phy@7d004000 { status = "okay"; vbus-supply = <&vdd_run_cam>; }; - usb@0,7d008000 { + usb@7d008000 { status = "okay"; }; - usb-phy@0,7d008000 { + usb-phy@7d008000 { status = "okay"; vbus-supply = <&vdd_usb3_vbus>; }; @@ -973,7 +976,7 @@ linux,input-type = <5>; linux,code = <0>; debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; power { @@ -981,7 +984,7 @@ gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 6e28e41d7e3e..2013f8916084 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -11,7 +11,7 @@ #address-cells = <2>; #size-cells = <2>; - pcie-controller@0,01003000 { + pcie-controller@01003000 { compatible = "nvidia,tegra124-pcie"; device_type = "pci"; reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ @@ -77,7 +77,7 @@ }; }; - host1x@0,50000000 { + host1x@50000000 { compatible = "nvidia,tegra124-host1x", "simple-bus"; reg = <0x0 0x50000000 0x0 0x00034000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ @@ -92,7 +92,7 @@ ranges = <0 0x54000000 0 0x54000000 0 0x01000000>; - dc@0,54200000 { + dc@54200000 { compatible = "nvidia,tegra124-dc"; reg = <0x0 0x54200000 0x0 0x00040000>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; @@ -107,7 +107,7 @@ nvidia,head = <0>; }; - dc@0,54240000 { + dc@54240000 { compatible = "nvidia,tegra124-dc"; reg = <0x0 0x54240000 0x0 0x00040000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; @@ -122,7 +122,7 @@ nvidia,head = <1>; }; - hdmi@0,54280000 { + hdmi@54280000 { compatible = "nvidia,tegra124-hdmi"; reg = <0x0 0x54280000 0x0 0x00040000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; @@ -134,7 +134,7 @@ status = "disabled"; }; - sor@0,54540000 { + sor@54540000 { compatible = "nvidia,tegra124-sor"; reg = <0x0 0x54540000 0x0 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; @@ -148,7 +148,7 @@ status = "disabled"; }; - dpaux: dpaux@0,545c0000 { + dpaux: dpaux@545c0000 { compatible = "nvidia,tegra124-dpaux"; reg = <0x0 0x545c0000 0x0 0x00040000>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; @@ -161,7 +161,7 @@ }; }; - gic: interrupt-controller@0,50041000 { + gic: interrupt-controller@50041000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -174,7 +174,7 @@ interrupt-parent = <&gic>; }; - gpu@0,57000000 { + gpu@57000000 { compatible = "nvidia,gk20a"; reg = <0x0 0x57000000 0x0 0x01000000>, <0x0 0x58000000 0x0 0x01000000>; @@ -201,7 +201,7 @@ interrupt-parent = <&gic>; }; - timer@0,60005000 { + timer@60005000 { compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer"; reg = <0x0 0x60005000 0x0 0x400>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, @@ -214,7 +214,7 @@ clock-names = "timer"; }; - tegra_car: clock@0,60006000 { + tegra_car: clock@60006000 { compatible = "nvidia,tegra132-car"; reg = <0x0 0x60006000 0x0 0x1000>; #clock-cells = <1>; @@ -222,12 +222,12 @@ nvidia,external-memory-controller = <&emc>; }; - flow-controller@0,60007000 { + flow-controller@60007000 { compatible = "nvidia,tegra124-flowctrl"; reg = <0x0 0x60007000 0x0 0x1000>; }; - actmon@0,6000c800 { + actmon@6000c800 { compatible = "nvidia,tegra124-actmon"; reg = <0x0 0x6000c800 0x0 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; @@ -238,7 +238,7 @@ reset-names = "actmon"; }; - gpio: gpio@0,6000d000 { + gpio: gpio@6000d000 { compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio"; reg = <0x0 0x6000d000 0x0 0x1000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, @@ -255,7 +255,7 @@ interrupt-controller; }; - apbdma: dma@0,60020000 { + apbdma: dma@60020000 { compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma"; reg = <0x0 0x60020000 0x0 0x1400>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, @@ -297,13 +297,13 @@ #dma-cells = <1>; }; - apbmisc@0,70000800 { + apbmisc@70000800 { compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc"; reg = <0x0 0x70000800 0x0 0x64>, /* Chip revision */ <0x0 0x7000e864 0x0 0x04>; /* Strapping options */ }; - pinmux: pinmux@0,70000868 { + pinmux: pinmux@70000868 { compatible = "nvidia,tegra124-pinmux"; reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */ <0x0 0x70003000 0x0 0x434>, /* Mux registers */ @@ -315,10 +315,10 @@ * driver and APB DMA based serial driver for higher baudrate * and performance. To enable the 8250 based driver, the compatible * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable - * the APB DMA based serial driver, the comptible is + * the APB DMA based serial driver, the compatible is * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart". */ - uarta: serial@0,70006000 { + uarta: serial@70006000 { compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006000 0x0 0x40>; reg-shift = <2>; @@ -332,7 +332,7 @@ status = "disabled"; }; - uartb: serial@0,70006040 { + uartb: serial@70006040 { compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006040 0x0 0x40>; reg-shift = <2>; @@ -346,7 +346,7 @@ status = "disabled"; }; - uartc: serial@0,70006200 { + uartc: serial@70006200 { compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006200 0x0 0x40>; reg-shift = <2>; @@ -360,7 +360,7 @@ status = "disabled"; }; - uartd: serial@0,70006300 { + uartd: serial@70006300 { compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006300 0x0 0x40>; reg-shift = <2>; @@ -374,7 +374,7 @@ status = "disabled"; }; - pwm: pwm@0,7000a000 { + pwm: pwm@7000a000 { compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm"; reg = <0x0 0x7000a000 0x0 0x100>; #pwm-cells = <2>; @@ -385,7 +385,7 @@ status = "disabled"; }; - i2c@0,7000c000 { + i2c@7000c000 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000c000 0x0 0x100>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; @@ -400,7 +400,7 @@ status = "disabled"; }; - i2c@0,7000c400 { + i2c@7000c400 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000c400 0x0 0x100>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; @@ -415,7 +415,7 @@ status = "disabled"; }; - i2c@0,7000c500 { + i2c@7000c500 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000c500 0x0 0x100>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; @@ -430,7 +430,7 @@ status = "disabled"; }; - i2c@0,7000c700 { + i2c@7000c700 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000c700 0x0 0x100>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; @@ -445,7 +445,7 @@ status = "disabled"; }; - i2c@0,7000d000 { + i2c@7000d000 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000d000 0x0 0x100>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; @@ -460,7 +460,7 @@ status = "disabled"; }; - i2c@0,7000d100 { + i2c@7000d100 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000d100 0x0 0x100>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; @@ -475,7 +475,7 @@ status = "disabled"; }; - spi@0,7000d400 { + spi@7000d400 { compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000d400 0x0 0x200>; interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; @@ -490,7 +490,7 @@ status = "disabled"; }; - spi@0,7000d600 { + spi@7000d600 { compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000d600 0x0 0x200>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; @@ -505,7 +505,7 @@ status = "disabled"; }; - spi@0,7000d800 { + spi@7000d800 { compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000d800 0x0 0x200>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; @@ -520,7 +520,7 @@ status = "disabled"; }; - spi@0,7000da00 { + spi@7000da00 { compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000da00 0x0 0x200>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; @@ -535,7 +535,7 @@ status = "disabled"; }; - spi@0,7000dc00 { + spi@7000dc00 { compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000dc00 0x0 0x200>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; @@ -550,7 +550,7 @@ status = "disabled"; }; - spi@0,7000de00 { + spi@7000de00 { compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000de00 0x0 0x200>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; @@ -565,7 +565,7 @@ status = "disabled"; }; - rtc@0,7000e000 { + rtc@7000e000 { compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc"; reg = <0x0 0x7000e000 0x0 0x100>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; @@ -573,14 +573,14 @@ clock-names = "rtc"; }; - pmc@0,7000e400 { + pmc@7000e400 { compatible = "nvidia,tegra124-pmc"; reg = <0x0 0x7000e400 0x0 0x400>; clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; }; - fuse@0,7000f800 { + fuse@7000f800 { compatible = "nvidia,tegra124-efuse"; reg = <0x0 0x7000f800 0x0 0x400>; clocks = <&tegra_car TEGRA124_CLK_FUSE>; @@ -589,7 +589,7 @@ reset-names = "fuse"; }; - mc: memory-controller@0,70019000 { + mc: memory-controller@70019000 { compatible = "nvidia,tegra132-mc"; reg = <0x0 0x70019000 0x0 0x1000>; clocks = <&tegra_car TEGRA124_CLK_MC>; @@ -600,14 +600,14 @@ #iommu-cells = <1>; }; - emc: emc@0,7001b000 { + emc: emc@7001b000 { compatible = "nvidia,tegra132-emc", "nvidia,tegra124-emc"; reg = <0x0 0x7001b000 0x0 0x1000>; nvidia,memory-controller = <&mc>; }; - sata@0,70020000 { + sata@70020000 { compatible = "nvidia,tegra124-ahci"; reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */ <0x0 0x70020000 0x0 0x7000>; /* SATA */ @@ -626,7 +626,7 @@ status = "disabled"; }; - hda@0,70030000 { + hda@70030000 { compatible = "nvidia,tegra132-hda", "nvidia,tegra124-hda", "nvidia,tegra30-hda"; reg = <0x0 0x70030000 0x0 0x10000>; @@ -642,7 +642,7 @@ status = "disabled"; }; - padctl: padctl@0,7009f000 { + padctl: padctl@7009f000 { compatible = "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl"; reg = <0x0 0x7009f000 0x0 0x1000>; @@ -682,7 +682,7 @@ }; }; - sdhci@0,700b0000 { + sdhci@700b0000 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0000 0x0 0x200>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; @@ -693,7 +693,7 @@ status = "disabled"; }; - sdhci@0,700b0200 { + sdhci@700b0200 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0200 0x0 0x200>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; @@ -704,7 +704,7 @@ status = "disabled"; }; - sdhci@0,700b0400 { + sdhci@700b0400 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0400 0x0 0x200>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; @@ -715,7 +715,7 @@ status = "disabled"; }; - sdhci@0,700b0600 { + sdhci@700b0600 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0600 0x0 0x200>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; @@ -726,7 +726,7 @@ status = "disabled"; }; - soctherm: thermal-sensor@0,700e2000 { + soctherm: thermal-sensor@700e2000 { compatible = "nvidia,tegra124-soctherm"; reg = <0x0 0x700e2000 0x0 0x1000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; @@ -738,7 +738,7 @@ #thermal-sensor-cells = <1>; }; - ahub@0,70300000 { + ahub@70300000 { compatible = "nvidia,tegra124-ahub"; reg = <0x0 0x70300000 0x0 0x200>, <0x0 0x70300800 0x0 0x800>, @@ -790,7 +790,7 @@ #address-cells = <2>; #size-cells = <2>; - tegra_i2s0: i2s@0,70301000 { + tegra_i2s0: i2s@70301000 { compatible = "nvidia,tegra124-i2s"; reg = <0x0 0x70301000 0x0 0x100>; nvidia,ahub-cif-ids = <4 4>; @@ -801,7 +801,7 @@ status = "disabled"; }; - tegra_i2s1: i2s@0,70301100 { + tegra_i2s1: i2s@70301100 { compatible = "nvidia,tegra124-i2s"; reg = <0x0 0x70301100 0x0 0x100>; nvidia,ahub-cif-ids = <5 5>; @@ -812,7 +812,7 @@ status = "disabled"; }; - tegra_i2s2: i2s@0,70301200 { + tegra_i2s2: i2s@70301200 { compatible = "nvidia,tegra124-i2s"; reg = <0x0 0x70301200 0x0 0x100>; nvidia,ahub-cif-ids = <6 6>; @@ -823,7 +823,7 @@ status = "disabled"; }; - tegra_i2s3: i2s@0,70301300 { + tegra_i2s3: i2s@70301300 { compatible = "nvidia,tegra124-i2s"; reg = <0x0 0x70301300 0x0 0x100>; nvidia,ahub-cif-ids = <7 7>; @@ -834,7 +834,7 @@ status = "disabled"; }; - tegra_i2s4: i2s@0,70301400 { + tegra_i2s4: i2s@70301400 { compatible = "nvidia,tegra124-i2s"; reg = <0x0 0x70301400 0x0 0x100>; nvidia,ahub-cif-ids = <8 8>; @@ -846,7 +846,7 @@ }; }; - usb@0,7d000000 { + usb@7d000000 { compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x0 0x7d000000 0x0 0x4000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; @@ -859,7 +859,7 @@ status = "disabled"; }; - phy1: usb-phy@0,7d000000 { + phy1: usb-phy@7d000000 { compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d000000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; @@ -884,7 +884,7 @@ status = "disabled"; }; - usb@0,7d004000 { + usb@7d004000 { compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x0 0x7d004000 0x0 0x4000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; @@ -897,7 +897,7 @@ status = "disabled"; }; - phy2: usb-phy@0,7d004000 { + phy2: usb-phy@7d004000 { compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d004000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; @@ -921,7 +921,7 @@ status = "disabled"; }; - usb@0,7d008000 { + usb@7d008000 { compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x0 0x7d008000 0x0 0x4000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; @@ -934,7 +934,7 @@ status = "disabled"; }; - phy3: usb-phy@0,7d008000 { + phy3: usb-phy@7d008000 { compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d008000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 2b7f88950d1e..316c92c03821 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -5,7 +5,7 @@ compatible = "nvidia,p2180", "nvidia,tegra210"; aliases { - rtc1 = "/rtc@0,7000e000"; + rtc1 = "/rtc@7000e000"; serial0 = &uarta; }; @@ -15,16 +15,16 @@ }; /* debug port */ - serial@0,70006000 { + serial@70006000 { status = "okay"; }; - pmc@0,7000e400 { + pmc@7000e400 { nvidia,invert-interrupt; }; /* eMMC */ - sdhci@0,700b0600 { + sdhci@700b0600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi index ece0dec61fae..0ec92578cacb 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi @@ -5,31 +5,35 @@ compatible = "nvidia,p2530", "nvidia,tegra210"; aliases { - rtc1 = "/rtc@0,7000e000"; + rtc1 = "/rtc@7000e000"; serial0 = &uarta; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { device_type = "memory"; reg = <0x0 0x80000000 0x0 0xc0000000>; }; /* debug port */ - serial@0,70006000 { + serial@70006000 { status = "okay"; }; - i2c@0,7000d000 { + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; }; - pmc@0,7000e400 { + pmc@7000e400 { nvidia,invert-interrupt; }; /* eMMC */ - sdhci@0,700b0600 { + sdhci@700b0600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2571.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2571.dts index 58d27ddd57ff..576957a55801 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2571.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2571.dts @@ -7,7 +7,7 @@ model = "NVIDIA Tegra210 P2571 reference design"; compatible = "nvidia,p2571", "nvidia,tegra210"; - pinmux: pinmux@0,700008d4 { + pinmux: pinmux@700008d4 { pinctrl-names = "boot"; pinctrl-0 = <&state_boot>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi index f3f91392214e..e008e3364d2a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi @@ -2,7 +2,7 @@ model = "NVIDIA Tegra210 P2595 I/O board"; compatible = "nvidia,p2595", "nvidia,tegra210"; - pinmux: pinmux@0,700008d4 { + pinmux: pinmux@700008d4 { pinctrl-names = "boot"; pinctrl-0 = <&state_boot>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index be3eccbe8013..a2480c0c7e72 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1,8 +1,10 @@ +#include <dt-bindings/input/input.h> + / { model = "NVIDIA Tegra210 P2597 I/O board"; compatible = "nvidia,p2597", "nvidia,tegra210"; - pinmux: pinmux@0,700008d4 { + pinmux: pinmux@700008d4 { pinctrl-names = "boot"; pinctrl-0 = <&state_boot>; @@ -1260,11 +1262,35 @@ }; /* MMC/SD */ - sdhci@0,700b0000 { + sdhci@700b0000 { status = "okay"; bus-width = <4>; no-1-8-v; cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + + volume_down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + volume_up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts new file mode 100644 index 000000000000..4d89f4e02d98 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -0,0 +1,1424 @@ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> + +#include "tegra210.dtsi" + +/ { + model = "Google Pixel C"; + compatible = "google,smaug-rev8", "google,smaug-rev7", + "google,smaug-rev6", "google,smaug-rev5", + "google,smaug-rev4", "google,smaug-rev3", + "google,smaug-rev1", "google,smaug", "nvidia,tegra210"; + + aliases { + serial0 = &uarta; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0xc0000000>; + }; + + pinmux: pinmux@700008d4 { + pinctrl-names = "boot"; + pinctrl-0 = <&state_boot>; + + state_boot: pinmux { + pex_l0_rst_n_pa0 { + nvidia,pins = "pex_l0_rst_n_pa0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + pex_l0_clkreq_n_pa1 { + nvidia,pins = "pex_l0_clkreq_n_pa1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + pex_wake_n_pa2 { + nvidia,pins = "pex_wake_n_pa2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + pex_l1_rst_n_pa3 { + nvidia,pins = "pex_l1_rst_n_pa3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + pex_l1_clkreq_n_pa4 { + nvidia,pins = "pex_l1_clkreq_n_pa4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + sata_led_active_pa5 { + nvidia,pins = "sata_led_active_pa5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pa6 { + nvidia,pins = "pa6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_fs_pb0 { + nvidia,pins = "dap1_fs_pb0"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_din_pb1 { + nvidia,pins = "dap1_din_pb1"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_dout_pb2 { + nvidia,pins = "dap1_dout_pb2"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_sclk_pb3 { + nvidia,pins = "dap1_sclk_pb3"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_mosi_pb4 { + nvidia,pins = "spi2_mosi_pb4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_miso_pb5 { + nvidia,pins = "spi2_miso_pb5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_sck_pb6 { + nvidia,pins = "spi2_sck_pb6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_cs0_pb7 { + nvidia,pins = "spi2_cs0_pb7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_mosi_pc0 { + nvidia,pins = "spi1_mosi_pc0"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_miso_pc1 { + nvidia,pins = "spi1_miso_pc1"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_sck_pc2 { + nvidia,pins = "spi1_sck_pc2"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_cs0_pc3 { + nvidia,pins = "spi1_cs0_pc3"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_cs1_pc4 { + nvidia,pins = "spi1_cs1_pc4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_sck_pc5 { + nvidia,pins = "spi4_sck_pc5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_cs0_pc6 { + nvidia,pins = "spi4_cs0_pc6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_mosi_pc7 { + nvidia,pins = "spi4_mosi_pc7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_miso_pd0 { + nvidia,pins = "spi4_miso_pd0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_tx_pd1 { + nvidia,pins = "uart3_tx_pd1"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_rx_pd2 { + nvidia,pins = "uart3_rx_pd2"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_rts_pd3 { + nvidia,pins = "uart3_rts_pd3"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_cts_pd4 { + nvidia,pins = "uart3_cts_pd4"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic1_clk_pe0 { + nvidia,pins = "dmic1_clk_pe0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic1_dat_pe1 { + nvidia,pins = "dmic1_dat_pe1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic2_clk_pe2 { + nvidia,pins = "dmic2_clk_pe2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic2_dat_pe3 { + nvidia,pins = "dmic2_dat_pe3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic3_clk_pe4 { + nvidia,pins = "dmic3_clk_pe4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic3_dat_pe5 { + nvidia,pins = "dmic3_dat_pe5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pe6 { + nvidia,pins = "pe6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pe7 { + nvidia,pins = "pe7"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gen3_i2c_scl_pf0 { + nvidia,pins = "gen3_i2c_scl_pf0"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + gen3_i2c_sda_pf1 { + nvidia,pins = "gen3_i2c_sda_pf1"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + uart2_tx_pg0 { + nvidia,pins = "uart2_tx_pg0"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart2_rx_pg1 { + nvidia,pins = "uart2_rx_pg1"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart2_rts_pg2 { + nvidia,pins = "uart2_rts_pg2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart2_cts_pg3 { + nvidia,pins = "uart2_cts_pg3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + wifi_en_ph0 { + nvidia,pins = "wifi_en_ph0"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + wifi_rst_ph1 { + nvidia,pins = "wifi_rst_ph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + wifi_wake_ap_ph2 { + nvidia,pins = "wifi_wake_ap_ph2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ap_wake_bt_ph3 { + nvidia,pins = "ap_wake_bt_ph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + bt_rst_ph4 { + nvidia,pins = "bt_rst_ph4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + bt_wake_ap_ph5 { + nvidia,pins = "bt_wake_ap_ph5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ph6 { + nvidia,pins = "ph6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ap_wake_nfc_ph7 { + nvidia,pins = "ap_wake_nfc_ph7"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + nfc_en_pi0 { + nvidia,pins = "nfc_en_pi0"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + nfc_int_pi1 { + nvidia,pins = "nfc_int_pi1"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gps_en_pi2 { + nvidia,pins = "gps_en_pi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gps_rst_pi3 { + nvidia,pins = "gps_rst_pi3"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_tx_pi4 { + nvidia,pins = "uart4_tx_pi4"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_rx_pi5 { + nvidia,pins = "uart4_rx_pi5"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_rts_pi6 { + nvidia,pins = "uart4_rts_pi6"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_cts_pi7 { + nvidia,pins = "uart4_cts_pi7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_sda_pj0 { + nvidia,pins = "gen1_i2c_sda_pj0"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_scl_pj1 { + nvidia,pins = "gen1_i2c_scl_pj1"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + gen2_i2c_scl_pj2 { + nvidia,pins = "gen2_i2c_scl_pj2"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_sda_pj3 { + nvidia,pins = "gen2_i2c_sda_pj3"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + dap4_fs_pj4 { + nvidia,pins = "dap4_fs_pj4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap4_din_pj5 { + nvidia,pins = "dap4_din_pj5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap4_dout_pj6 { + nvidia,pins = "dap4_dout_pj6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap4_sclk_pj7 { + nvidia,pins = "dap4_sclk_pj7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk0 { + nvidia,pins = "pk0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk1 { + nvidia,pins = "pk1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk2 { + nvidia,pins = "pk2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk3 { + nvidia,pins = "pk3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk4 { + nvidia,pins = "pk4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk5 { + nvidia,pins = "pk5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk6 { + nvidia,pins = "pk6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk7 { + nvidia,pins = "pk7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pl0 { + nvidia,pins = "pl0"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pl1 { + nvidia,pins = "pl1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_clk_pm0 { + nvidia,pins = "sdmmc1_clk_pm0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_cmd_pm1 { + nvidia,pins = "sdmmc1_cmd_pm1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat3_pm2 { + nvidia,pins = "sdmmc1_dat3_pm2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat2_pm3 { + nvidia,pins = "sdmmc1_dat2_pm3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat1_pm4 { + nvidia,pins = "sdmmc1_dat1_pm4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat0_pm5 { + nvidia,pins = "sdmmc1_dat0_pm5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_clk_pp0 { + nvidia,pins = "sdmmc3_clk_pp0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cmd_pp1 { + nvidia,pins = "sdmmc3_cmd_pp1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat3_pp2 { + nvidia,pins = "sdmmc3_dat3_pp2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat2_pp3 { + nvidia,pins = "sdmmc3_dat2_pp3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat1_pp4 { + nvidia,pins = "sdmmc3_dat1_pp4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat0_pp5 { + nvidia,pins = "sdmmc3_dat0_pp5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam1_mclk_ps0 { + nvidia,pins = "cam1_mclk_ps0"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam2_mclk_ps1 { + nvidia,pins = "cam2_mclk_ps1"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_ps2 { + nvidia,pins = "cam_i2c_scl_ps2"; + nvidia,function = "i2cvi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_sda_ps3 { + nvidia,pins = "cam_i2c_sda_ps3"; + nvidia,function = "i2cvi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + cam_rst_ps4 { + nvidia,pins = "cam_rst_ps4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_af_en_ps5 { + nvidia,pins = "cam_af_en_ps5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_flash_en_ps6 { + nvidia,pins = "cam_flash_en_ps6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam1_pwdn_ps7 { + nvidia,pins = "cam1_pwdn_ps7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam2_pwdn_pt0 { + nvidia,pins = "cam2_pwdn_pt0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam1_strobe_pt1 { + nvidia,pins = "cam1_strobe_pt1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_tx_pu0 { + nvidia,pins = "uart1_tx_pu0"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_rx_pu1 { + nvidia,pins = "uart1_rx_pu1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_rts_pu2 { + nvidia,pins = "uart1_rts_pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_cts_pu3 { + nvidia,pins = "uart1_cts_pu3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_bl_pwm_pv0 { + nvidia,pins = "lcd_bl_pwm_pv0"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_bl_en_pv1 { + nvidia,pins = "lcd_bl_en_pv1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_rst_pv2 { + nvidia,pins = "lcd_rst_pv2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_gpio1_pv3 { + nvidia,pins = "lcd_gpio1_pv3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_gpio2_pv4 { + nvidia,pins = "lcd_gpio2_pv4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ap_ready_pv5 { + nvidia,pins = "ap_ready_pv5"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + touch_rst_pv6 { + nvidia,pins = "touch_rst_pv6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + touch_clk_pv7 { + nvidia,pins = "touch_clk_pv7"; + nvidia,function = "touch"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + modem_wake_ap_px0 { + nvidia,pins = "modem_wake_ap_px0"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + touch_int_px1 { + nvidia,pins = "touch_int_px1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + motion_int_px2 { + nvidia,pins = "motion_int_px2"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + als_prox_int_px3 { + nvidia,pins = "als_prox_int_px3"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + temp_alert_px4 { + nvidia,pins = "temp_alert_px4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_power_on_px5 { + nvidia,pins = "button_power_on_px5"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_vol_up_px6 { + nvidia,pins = "button_vol_up_px6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_vol_down_px7 { + nvidia,pins = "button_vol_down_px7"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_slide_sw_py0 { + nvidia,pins = "button_slide_sw_py0"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_home_py1 { + nvidia,pins = "button_home_py1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_te_py2 { + nvidia,pins = "lcd_te_py2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_scl_py3 { + nvidia,pins = "pwr_i2c_scl_py3"; + nvidia,function = "i2cpmu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_sda_py4 { + nvidia,pins = "pwr_i2c_sda_py4"; + nvidia,function = "i2cpmu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + clk_32k_out_py5 { + nvidia,pins = "clk_32k_out_py5"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz0 { + nvidia,pins = "pz0"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz1 { + nvidia,pins = "pz1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz2 { + nvidia,pins = "pz2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz3 { + nvidia,pins = "pz3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz4 { + nvidia,pins = "pz4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz5 { + nvidia,pins = "pz5"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_fs_paa0 { + nvidia,pins = "dap2_fs_paa0"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_sclk_paa1 { + nvidia,pins = "dap2_sclk_paa1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_din_paa2 { + nvidia,pins = "dap2_din_paa2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_dout_paa3 { + nvidia,pins = "dap2_dout_paa3"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + aud_mclk_pbb0 { + nvidia,pins = "aud_mclk_pbb0"; + nvidia,function = "aud"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dvfs_clk_pbb2 { + nvidia,pins = "dvfs_clk_pbb2"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gpio_x1_aud_pbb3 { + nvidia,pins = "gpio_x1_aud_pbb3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gpio_x3_aud_pbb4 { + nvidia,pins = "gpio_x3_aud_pbb4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + hdmi_cec_pcc0 { + nvidia,pins = "hdmi_cec_pcc0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + hdmi_int_dp_hpd_pcc1 { + nvidia,pins = "hdmi_int_dp_hpd_pcc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + spdif_out_pcc2 { + nvidia,pins = "spdif_out_pcc2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spdif_in_pcc3 { + nvidia,pins = "spdif_in_pcc3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + usb_vbus_en0_pcc4 { + nvidia,pins = "usb_vbus_en0_pcc4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + usb_vbus_en1_pcc5 { + nvidia,pins = "usb_vbus_en1_pcc5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + dp_hpd0_pcc6 { + nvidia,pins = "dp_hpd0_pcc6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pcc7 { + nvidia,pins = "pcc7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + spi2_cs1_pdd0 { + nvidia,pins = "spi2_cs1_pdd0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_sck_pee0 { + nvidia,pins = "qspi_sck_pee0"; + nvidia,function = "qspi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_cs_n_pee1 { + nvidia,pins = "qspi_cs_n_pee1"; + nvidia,function = "qspi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io0_pee2 { + nvidia,pins = "qspi_io0_pee2"; + nvidia,function = "qspi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io1_pee3 { + nvidia,pins = "qspi_io1_pee3"; + nvidia,function = "qspi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io2_pee4 { + nvidia,pins = "qspi_io2_pee4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io3_pee5 { + nvidia,pins = "qspi_io3_pee5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "core"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "jtag"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + clk_req { + nvidia,pins = "clk_req"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + shutdown { + nvidia,pins = "shutdown"; + nvidia,function = "shutdown"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + }; + }; + + serial@70006000 { + status = "okay"; + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <1000000>; + + ec@1e { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(Z, 1) IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + + ec_i2c_0: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + #address-cells = <1>; + #size-cells = <0>; + + google,remote-bus = <0>; + + battery: bq27742@55 { + compatible = "ti,bq27742"; + reg = <0x55>; + battery-name = "battery"; + }; + }; + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <0>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <12000 6000>; + nvidia,core-pwr-off-time = <39053>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + status = "okay"; + }; + + sdhci@700b0600 { + bus-width = <8>; + non-removable; + status = "okay"; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + cpus { + cpu@0 { + enable-method = "psci"; + }; + + cpu@1 { + enable-method = "psci"; + }; + + cpu@2 { + enable-method = "psci"; + }; + + cpu@3 { + enable-method = "psci"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + gpio-keys,name = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <30>; + wakeup-source; + }; + + lid { + label = "Lid"; + gpios = <&gpio TEGRA_GPIO(B, 4) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + }; + + tablet_mode { + label = "Tablet Mode"; + gpios = <&gpio TEGRA_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_TABLET_MODE>; + wakeup-source; + }; + + volume_down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + volume_up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(M, 4) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 23b0630602cf..76fe31faa1a5 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -10,7 +10,7 @@ #address-cells = <2>; #size-cells = <2>; - host1x@0,50000000 { + host1x@50000000 { compatible = "nvidia,tegra210-host1x", "simple-bus"; reg = <0x0 0x50000000 0x0 0x00034000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ @@ -25,7 +25,7 @@ ranges = <0x0 0x54000000 0x0 0x54000000 0x0 0x01000000>; - dpaux1: dpaux@0,54040000 { + dpaux1: dpaux@54040000 { compatible = "nvidia,tegra210-dpaux"; reg = <0x0 0x54040000 0x0 0x00040000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; @@ -37,19 +37,19 @@ status = "disabled"; }; - vi@0,54080000 { + vi@54080000 { compatible = "nvidia,tegra210-vi"; reg = <0x0 0x54080000 0x0 0x00040000>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; - tsec@0,54100000 { + tsec@54100000 { compatible = "nvidia,tegra210-tsec"; reg = <0x0 0x54100000 0x0 0x00040000>; }; - dc@0,54200000 { + dc@54200000 { compatible = "nvidia,tegra210-dc"; reg = <0x0 0x54200000 0x0 0x00040000>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; @@ -64,7 +64,7 @@ nvidia,head = <0>; }; - dc@0,54240000 { + dc@54240000 { compatible = "nvidia,tegra210-dc"; reg = <0x0 0x54240000 0x0 0x00040000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; @@ -79,7 +79,7 @@ nvidia,head = <1>; }; - dsi@0,54300000 { + dsi@54300000 { compatible = "nvidia,tegra210-dsi"; reg = <0x0 0x54300000 0x0 0x00040000>; clocks = <&tegra_car TEGRA210_CLK_DSIA>, @@ -96,19 +96,19 @@ #size-cells = <0>; }; - vic@0,54340000 { + vic@54340000 { compatible = "nvidia,tegra210-vic"; reg = <0x0 0x54340000 0x0 0x00040000>; status = "disabled"; }; - nvjpg@0,54380000 { + nvjpg@54380000 { compatible = "nvidia,tegra210-nvjpg"; reg = <0x0 0x54380000 0x0 0x00040000>; status = "disabled"; }; - dsi@0,54400000 { + dsi@54400000 { compatible = "nvidia,tegra210-dsi"; reg = <0x0 0x54400000 0x0 0x00040000>; clocks = <&tegra_car TEGRA210_CLK_DSIB>, @@ -125,25 +125,25 @@ #size-cells = <0>; }; - nvdec@0,54480000 { + nvdec@54480000 { compatible = "nvidia,tegra210-nvdec"; reg = <0x0 0x54480000 0x0 0x00040000>; status = "disabled"; }; - nvenc@0,544c0000 { + nvenc@544c0000 { compatible = "nvidia,tegra210-nvenc"; reg = <0x0 0x544c0000 0x0 0x00040000>; status = "disabled"; }; - tsec@0,54500000 { + tsec@54500000 { compatible = "nvidia,tegra210-tsec"; reg = <0x0 0x54500000 0x0 0x00040000>; status = "disabled"; }; - sor@0,54540000 { + sor@54540000 { compatible = "nvidia,tegra210-sor"; reg = <0x0 0x54540000 0x0 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; @@ -157,7 +157,7 @@ status = "disabled"; }; - sor@0,54580000 { + sor@54580000 { compatible = "nvidia,tegra210-sor1"; reg = <0x0 0x54580000 0x0 0x00040000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; @@ -171,7 +171,7 @@ status = "disabled"; }; - dpaux: dpaux@0,545c0000 { + dpaux: dpaux@545c0000 { compatible = "nvidia,tegra124-dpaux"; reg = <0x0 0x545c0000 0x0 0x00040000>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; @@ -183,21 +183,21 @@ status = "disabled"; }; - isp@0,54600000 { + isp@54600000 { compatible = "nvidia,tegra210-isp"; reg = <0x0 0x54600000 0x0 0x00040000>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; - isp@0,54680000 { + isp@54680000 { compatible = "nvidia,tegra210-isp"; reg = <0x0 0x54680000 0x0 0x00040000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; - i2c@0,546c0000 { + i2c@546c0000 { compatible = "nvidia,tegra210-i2c-vi"; reg = <0x0 0x546c0000 0x0 0x00040000>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; @@ -205,7 +205,7 @@ }; }; - gic: interrupt-controller@0,50041000 { + gic: interrupt-controller@50041000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; interrupt-controller; @@ -218,7 +218,7 @@ interrupt-parent = <&gic>; }; - gpu@0,57000000 { + gpu@57000000 { compatible = "nvidia,gm20b"; reg = <0x0 0x57000000 0x0 0x01000000>, <0x0 0x58000000 0x0 0x01000000>; @@ -226,14 +226,18 @@ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "stall", "nonstall"; clocks = <&tegra_car TEGRA210_CLK_GPU>, - <&tegra_car TEGRA210_CLK_PLL_P_OUT5>; - clock-names = "gpu", "pwr"; + <&tegra_car TEGRA210_CLK_PLL_P_OUT5>, + <&tegra_car TEGRA210_CLK_PLL_G_REF>; + clock-names = "gpu", "pwr", "ref"; resets = <&tegra_car 184>; reset-names = "gpu"; + + iommus = <&mc TEGRA_SWGROUP_GPU>; + status = "disabled"; }; - lic: interrupt-controller@0,60004000 { + lic: interrupt-controller@60004000 { compatible = "nvidia,tegra210-ictlr"; reg = <0x0 0x60004000 0x0 0x40>, /* primary controller */ <0x0 0x60004100 0x0 0x40>, /* secondary controller */ @@ -246,7 +250,7 @@ interrupt-parent = <&gic>; }; - timer@0,60005000 { + timer@60005000 { compatible = "nvidia,tegra210-timer", "nvidia,tegra20-timer"; reg = <0x0 0x60005000 0x0 0x400>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, @@ -259,19 +263,19 @@ clock-names = "timer"; }; - tegra_car: clock@0,60006000 { + tegra_car: clock@60006000 { compatible = "nvidia,tegra210-car"; reg = <0x0 0x60006000 0x0 0x1000>; #clock-cells = <1>; #reset-cells = <1>; }; - flow-controller@0,60007000 { + flow-controller@60007000 { compatible = "nvidia,tegra210-flowctrl"; reg = <0x0 0x60007000 0x0 0x1000>; }; - gpio: gpio@0,6000d000 { + gpio: gpio@6000d000 { compatible = "nvidia,tegra210-gpio", "nvidia,tegra124-gpio", "nvidia,tegra30-gpio"; reg = <0x0 0x6000d000 0x0 0x1000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, @@ -288,7 +292,7 @@ interrupt-controller; }; - apbdma: dma@0,60020000 { + apbdma: dma@60020000 { compatible = "nvidia,tegra210-apbdma", "nvidia,tegra148-apbdma"; reg = <0x0 0x60020000 0x0 0x1400>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, @@ -330,13 +334,13 @@ #dma-cells = <1>; }; - apbmisc@0,70000800 { + apbmisc@70000800 { compatible = "nvidia,tegra210-apbmisc", "nvidia,tegra20-apbmisc"; reg = <0x0 0x70000800 0x0 0x64>, /* Chip revision */ <0x0 0x7000e864 0x0 0x04>; /* Strapping options */ }; - pinmux: pinmux@0,700008d4 { + pinmux: pinmux@700008d4 { compatible = "nvidia,tegra210-pinmux"; reg = <0x0 0x700008d4 0x0 0x29c>, /* Pad control registers */ <0x0 0x70003000 0x0 0x294>; /* Mux registers */ @@ -347,10 +351,10 @@ * driver and APB DMA based serial driver for higher baudrate * and performance. To enable the 8250 based driver, the compatible * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable - * the APB DMA based serial driver, the comptible is + * the APB DMA based serial driver, the compatible is * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart". */ - uarta: serial@0,70006000 { + uarta: serial@70006000 { compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006000 0x0 0x40>; reg-shift = <2>; @@ -364,7 +368,7 @@ status = "disabled"; }; - uartb: serial@0,70006040 { + uartb: serial@70006040 { compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006040 0x0 0x40>; reg-shift = <2>; @@ -378,7 +382,7 @@ status = "disabled"; }; - uartc: serial@0,70006200 { + uartc: serial@70006200 { compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006200 0x0 0x40>; reg-shift = <2>; @@ -392,7 +396,7 @@ status = "disabled"; }; - uartd: serial@0,70006300 { + uartd: serial@70006300 { compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006300 0x0 0x40>; reg-shift = <2>; @@ -406,7 +410,7 @@ status = "disabled"; }; - pwm: pwm@0,7000a000 { + pwm: pwm@7000a000 { compatible = "nvidia,tegra210-pwm", "nvidia,tegra20-pwm"; reg = <0x0 0x7000a000 0x0 0x100>; #pwm-cells = <2>; @@ -417,7 +421,7 @@ status = "disabled"; }; - i2c@0,7000c000 { + i2c@7000c000 { compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000c000 0x0 0x100>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; @@ -432,7 +436,7 @@ status = "disabled"; }; - i2c@0,7000c400 { + i2c@7000c400 { compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000c400 0x0 0x100>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; @@ -447,7 +451,7 @@ status = "disabled"; }; - i2c@0,7000c500 { + i2c@7000c500 { compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000c500 0x0 0x100>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; @@ -462,7 +466,7 @@ status = "disabled"; }; - i2c@0,7000c700 { + i2c@7000c700 { compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000c700 0x0 0x100>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; @@ -477,7 +481,7 @@ status = "disabled"; }; - i2c@0,7000d000 { + i2c@7000d000 { compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000d000 0x0 0x100>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; @@ -492,7 +496,7 @@ status = "disabled"; }; - i2c@0,7000d100 { + i2c@7000d100 { compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000d100 0x0 0x100>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; @@ -507,7 +511,7 @@ status = "disabled"; }; - spi@0,7000d400 { + spi@7000d400 { compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000d400 0x0 0x200>; interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; @@ -522,7 +526,7 @@ status = "disabled"; }; - spi@0,7000d600 { + spi@7000d600 { compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000d600 0x0 0x200>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; @@ -537,7 +541,7 @@ status = "disabled"; }; - spi@0,7000d800 { + spi@7000d800 { compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000d800 0x0 0x200>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; @@ -552,7 +556,7 @@ status = "disabled"; }; - spi@0,7000da00 { + spi@7000da00 { compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000da00 0x0 0x200>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; @@ -567,7 +571,7 @@ status = "disabled"; }; - rtc@0,7000e000 { + rtc@7000e000 { compatible = "nvidia,tegra210-rtc", "nvidia,tegra20-rtc"; reg = <0x0 0x7000e000 0x0 0x100>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; @@ -575,16 +579,14 @@ clock-names = "rtc"; }; - pmc: pmc@0,7000e400 { + pmc: pmc@7000e400 { compatible = "nvidia,tegra210-pmc"; reg = <0x0 0x7000e400 0x0 0x400>; clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; - - #power-domain-cells = <1>; }; - fuse@0,7000f800 { + fuse@7000f800 { compatible = "nvidia,tegra210-efuse"; reg = <0x0 0x7000f800 0x0 0x400>; clocks = <&tegra_car TEGRA210_CLK_FUSE>; @@ -593,7 +595,7 @@ reset-names = "fuse"; }; - mc: memory-controller@0,70019000 { + mc: memory-controller@70019000 { compatible = "nvidia,tegra210-mc"; reg = <0x0 0x70019000 0x0 0x1000>; clocks = <&tegra_car TEGRA210_CLK_MC>; @@ -604,7 +606,7 @@ #iommu-cells = <1>; }; - hda@0,70030000 { + hda@70030000 { compatible = "nvidia,tegra210-hda", "nvidia,tegra30-hda"; reg = <0x0 0x70030000 0x0 0x10000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; @@ -619,7 +621,7 @@ status = "disabled"; }; - sdhci@0,700b0000 { + sdhci@700b0000 { compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0000 0x0 0x200>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; @@ -630,7 +632,7 @@ status = "disabled"; }; - sdhci@0,700b0200 { + sdhci@700b0200 { compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0200 0x0 0x200>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; @@ -641,7 +643,7 @@ status = "disabled"; }; - sdhci@0,700b0400 { + sdhci@700b0400 { compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0400 0x0 0x200>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; @@ -652,7 +654,7 @@ status = "disabled"; }; - sdhci@0,700b0600 { + sdhci@700b0600 { compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0600 0x0 0x200>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; @@ -663,7 +665,7 @@ status = "disabled"; }; - mipi: mipi@0,700e3000 { + mipi: mipi@700e3000 { compatible = "nvidia,tegra210-mipi"; reg = <0x0 0x700e3000 0x0 0x100>; clocks = <&tegra_car TEGRA210_CLK_MIPI_CAL>; @@ -671,7 +673,7 @@ #nvidia,mipi-calibrate-cells = <1>; }; - spi@0,70410000 { + spi@70410000 { compatible = "nvidia,tegra210-qspi"; reg = <0x0 0x70410000 0x0 0x1000>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; @@ -686,7 +688,7 @@ status = "disabled"; }; - usb@0,7d000000 { + usb@7d000000 { compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x0 0x7d000000 0x0 0x4000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; @@ -699,7 +701,7 @@ status = "disabled"; }; - phy1: usb-phy@0,7d000000 { + phy1: usb-phy@7d000000 { compatible = "nvidia,tegra210-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d000000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; @@ -724,7 +726,7 @@ status = "disabled"; }; - usb@0,7d004000 { + usb@7d004000 { compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x0 0x7d004000 0x0 0x4000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; @@ -737,7 +739,7 @@ status = "disabled"; }; - phy2: usb-phy@0,7d004000 { + phy2: usb-phy@7d004000 { compatible = "nvidia,tegra210-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d004000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index b992b1a3d956..9f561c943f6f 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -141,62 +141,66 @@ clock-frequency = <16666666>; }; +&extalr_clk { + clock-frequency = <32768>; +}; + &pfc { pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; scif1_pins: scif1 { - renesas,groups = "scif1_data_a", "scif1_ctrl"; - renesas,function = "scif1"; + groups = "scif1_data_a", "scif1_ctrl"; + function = "scif1"; }; scif2_pins: scif2 { - renesas,groups = "scif2_data_a"; - renesas,function = "scif2"; + groups = "scif2_data_a"; + function = "scif2"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk_a"; - renesas,function = "scif_clk"; + groups = "scif_clk_a"; + function = "scif_clk"; }; i2c2_pins: i2c2 { - renesas,groups = "i2c2_a"; - renesas,function = "i2c2"; + groups = "i2c2_a"; + function = "i2c2"; }; avb_pins: avb { - renesas,groups = "avb_mdc"; - renesas,function = "avb"; + groups = "avb_mdc"; + function = "avb"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; }; sdhi3_pins: sd3 { - renesas,groups = "sdhi3_data4", "sdhi3_ctrl"; - renesas,function = "sdhi3"; + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; }; sound_pins: sound { - renesas,groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; - renesas,function = "ssi"; + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; + function = "ssi"; }; sound_clk_pins: sound_clk { - renesas,groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", - "audio_clkout_a", "audio_clkout3_a"; - renesas,function = "audio_clk"; + groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", + "audio_clkout_a", "audio_clkout3_a"; + function = "audio_clk"; }; usb1_pins: usb1 { - renesas,groups = "usb1"; - renesas,function = "usb1"; + groups = "usb1"; + function = "usb1"; }; usb2_pins: usb2 { - renesas,groups = "usb2"; - renesas,function = "usb2"; + groups = "usb2"; + function = "usb2"; }; }; @@ -388,3 +392,16 @@ &ohci2 { status = "okay"; }; + +&pcie_bus_clk { + clock-frequency = <100000000>; + status = "okay"; +}; + +&pciec0 { + status = "okay"; +}; + +&pciec1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index eb0ce7b09617..7cb2d72e7378 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -120,7 +120,6 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - status = "disabled"; }; /* External SCIF clock - to be overridden by boards that provide it */ @@ -130,6 +129,13 @@ clock-frequency = <0>; }; + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -1155,5 +1161,54 @@ power-domains = <&cpg>; status = "disabled"; }; + pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a7795"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&cpg>; + status = "disabled"; + }; + + pciec1: pcie@ee800000 { + compatible = "renesas,pcie-r8a7795"; + reg = <0 0xee800000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 + 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 + 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 + 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&cpg>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index e3f0b5f4ba4e..7037a161b6ef 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,5 +1,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi index 6e27b22704df..fff8b1931f26 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi @@ -40,6 +40,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h> #include "rk3368.dtsi" @@ -105,16 +106,14 @@ keys: gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; - button@0 { + power { wakeup-source; gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; - linux,code = <116>; + linux,code = <KEY_POWER>; }; }; @@ -152,7 +151,6 @@ }; &emmc { - broken-cd; bus-width = <8>; cap-mmc-highspeed; disable-wp; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts new file mode 100644 index 000000000000..46cdddfcea6c --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts @@ -0,0 +1,319 @@ +/* + * Copyright (c) 2016 Andreas Färber + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3368.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "GeekBox"; + compatible = "geekbuying,geekbox", "rockchip,rk3368"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ext_gmac: gmac-clk { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + #clock-cells = <0>; + }; + + ir: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + + power { + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds: gpio-leds { + compatible = "gpio-leds"; + + blue { + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + label = "geekbox:blue:led"; + default-state = "on"; + }; + + red { + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + label = "geekbox:red:led"; + default-state = "off"; + }; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&emmc { + status = "okay"; + bus-width = <8>; + cap-mmc-highspeed; + clock-frequency = <150000000>; + disable-wp; + keep-power-in-suspend; + non-removable; + num-slots = <1>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc18_flash>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; +}; + +&gmac { + status = "okay"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + clock_in_out = "input"; + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + tx_delay = <0x30>; + rx_delay = <0x10>; +}; + +&i2c0 { + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&pmic_sleep>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + rockchip,system-power-controller; + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_io>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc_io>; + clock-output-names = "xin32k", "rk808-clkout2"; + #clock-cells = <1>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd_cpu"; + }; + + vdd_log: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd_log"; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + }; + + vcc18_flash: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_flash"; + }; + + vcc33_lcd: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_lcd"; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + }; + + vcca_18: LDO_REG4 { + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_18"; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + }; + + vcc18_lcd: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + }; + + vcc_sd: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_sd"; + }; + + vcc_lan: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_lan"; + }; + }; + }; +}; + +&pinctrl { + ir { + ir_int: ir-int { + rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + keys { + pwr_key: pwr-key { + rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_sleep: pmic-sleep { + rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + }; + + pmic_int: pmic-int { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&tsadc { + status = "okay"; + rockchip,hw-tshut-mode = <0>; /* CRU */ + rockchip,hw-tshut-polarity = <1>; /* high */ +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts index 1f2b642e794a..b56b7205e39b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -42,6 +42,7 @@ /dts-v1/; #include "rk3368.dtsi" +#include <dt-bindings/input/input.h> / { model = "Rockchip R88"; @@ -65,16 +66,14 @@ keys: gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; - button@0 { + power { wakeup-source; gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; - linux,code = <116>; + linux,code = <KEY_POWER>; }; }; @@ -185,7 +184,6 @@ }; &emmc { - broken-cd; bus-width = <8>; cap-mmc-highspeed; disable-wp; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 49d119103e31..8b4a7c9154e9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -413,7 +413,71 @@ }; thermal-zones { - #include "rk3368-thermal.dtsi" + cpu { + polling-delay-passive = <100>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&tsadc 0>; + + trips { + cpu_alert0: cpu_alert0 { + temperature = <75000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert1: cpu_alert1 { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <95000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = + <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu { + polling-delay-passive = <100>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&tsadc 1>; + + trips { + gpu_alert0: gpu_alert0 { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu_crit: gpu_crit { + temperature = <115000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; }; tsadc: tsadc@ff280000 { @@ -555,6 +619,18 @@ status = "disabled"; }; + mbox: mbox@ff6b0000 { + compatible = "rockchip,rk3368-mailbox"; + reg = <0x0 0xff6b0000 0x0 0x1000>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_MAILBOX>; + clock-names = "pclk_mailbox"; + #mbox-cells = <1>; + }; + pmugrf: syscon@ff738000 { compatible = "rockchip,rk3368-pmugrf", "syscon"; reg = <0x0 0xff738000 0x0 0x1000>; @@ -926,11 +1002,11 @@ tsadc { otp_gpio: otp-gpio { - rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; }; otp_out: otp-out { - rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 3 RK_FUNC_1 &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-thermal.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts index a10010f92f96..1a3eb1482050 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-thermal.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts @@ -1,8 +1,5 @@ /* - * Device Tree Source for RK3368 SoC thermal - * - * Copyright (c) 2015, Fuzhou Rockchip Electronics Co., Ltd - * Caesar Wang <wxt@rock-chips.com> + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -43,70 +40,85 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include <dt-bindings/thermal/thermal.h> +/dts-v1/; +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" -cpu_thermal: cpu_thermal { - polling-delay-passive = <100>; /* milliseconds */ - polling-delay = <5000>; /* milliseconds */ +/ { + model = "Rockchip RK3399 Evaluation Board"; + compatible = "rockchip,rk3399-evb", "rockchip,rk3399", + "google,rk3399evb-rev2"; - thermal-sensors = <&tsadc 0>; + vdd_center: vdd-center { + compatible = "pwm-regulator"; + pwms = <&pwm3 0 25000 0>; + regulator-name = "vdd_center"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + status = "okay"; + }; - trips { - cpu_alert0: cpu_alert0 { - temperature = <75000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_alert1: cpu_alert1 { - temperature = <80000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_crit: cpu_crit { - temperature = <95000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; - cooling-maps { - map0 { - trip = <&cpu_alert0>; - cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu_alert1>; - cooling-device = - <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; }; }; -gpu_thermal: gpu_thermal { - polling-delay-passive = <100>; /* milliseconds */ - polling-delay = <5000>; /* milliseconds */ +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; - thermal-sensors = <&tsadc 1>; +&pwm3 { + status = "okay"; +}; - trips { - gpu_alert0: gpu_alert0 { - temperature = <80000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - gpu_crit: gpu_crit { - temperature = <1150000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&pinctrl { + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <1 21 RK_FUNC_GPIO &pcfg_pull_up>; }; - }; - cooling-maps { - map0 { - trip = <&gpu_alert0>; - cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + pmic_dvs2: pmic-dvs2 { + rockchip,pins = + <1 18 RK_FUNC_GPIO &pcfg_pull_down>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi new file mode 100644 index 000000000000..46f325a143b0 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -0,0 +1,1013 @@ +/* + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/clock/rk3399-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/rockchip.h> + +/ { + compatible = "rockchip,rk3399"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu_l0>; + }; + core1 { + cpu = <&cpu_l1>; + }; + core2 { + cpu = <&cpu_l2>; + }; + core3 { + cpu = <&cpu_l3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu_b0>; + }; + core1 { + cpu = <&cpu_b1>; + }; + }; + }; + + cpu_l0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ + clocks = <&cru ARMCLKL>; + }; + + cpu_l1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + clocks = <&cru ARMCLKL>; + }; + + cpu_l2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + clocks = <&cru ARMCLKL>; + }; + + cpu_l3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + clocks = <&cru ARMCLKL>; + }; + + cpu_b0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ + clocks = <&cru ARMCLKB>; + }; + + cpu_b1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "psci"; + clocks = <&cru ARMCLKB>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dmac_bus: dma-controller@ff6d0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff6d0000 0x0 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC0_PERILP>; + clock-names = "apb_pclk"; + }; + + dmac_peri: dma-controller@ff6e0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff6e0000 0x0 0x4000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC1_PERILP>; + clock-names = "apb_pclk"; + }; + }; + + sdio0: dwmmc@fe310000 { + compatible = "rockchip,rk3399-dw-mshc", + "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xfe310000 0x0 0x4000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clock-freq-min-max = <400000 150000000>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + status = "disabled"; + }; + + sdmmc: dwmmc@fe320000 { + compatible = "rockchip,rk3399-dw-mshc", + "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xfe320000 0x0 0x4000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clock-freq-min-max = <400000 150000000>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + status = "disabled"; + }; + + usb_host0_ehci: usb@fe380000 { + compatible = "generic-ehci"; + reg = <0x0 0xfe380000 0x0 0x20000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>; + clock-names = "hclk_host0", "hclk_host0_arb"; + status = "disabled"; + }; + + usb_host0_ohci: usb@fe3a0000 { + compatible = "generic-ohci"; + reg = <0x0 0xfe3a0000 0x0 0x20000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>; + clock-names = "hclk_host0", "hclk_host0_arb"; + status = "disabled"; + }; + + usb_host1_ehci: usb@fe3c0000 { + compatible = "generic-ehci"; + reg = <0x0 0xfe3c0000 0x0 0x20000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>; + clock-names = "hclk_host1", "hclk_host1_arb"; + status = "disabled"; + }; + + usb_host1_ohci: usb@fe3e0000 { + compatible = "generic-ohci"; + reg = <0x0 0xfe3e0000 0x0 0x20000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>; + clock-names = "hclk_host1", "hclk_host1_arb"; + status = "disabled"; + }; + + gic: interrupt-controller@fee00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + + reg = <0x0 0xfee00000 0 0x10000>, /* GICD */ + <0x0 0xfef00000 0 0xc0000>, /* GICR */ + <0x0 0xfff00000 0 0x10000>, /* GICC */ + <0x0 0xfff10000 0 0x10000>, /* GICH */ + <0x0 0xfff20000 0 0x10000>; /* GICV */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + its: interrupt-controller@fee20000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0xfee20000 0x0 0x20000>; + }; + }; + + uart0: serial@ff180000 { + compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff180000 0x0 0x100>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; + status = "disabled"; + }; + + uart1: serial@ff190000 { + compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff190000 0x0 0x100>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; + status = "disabled"; + }; + + uart2: serial@ff1a0000 { + compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff1a0000 0x0 0x100>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2c_xfer>; + status = "disabled"; + }; + + uart3: serial@ff1b0000 { + compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff1b0000 0x0 0x100>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_xfer>; + status = "disabled"; + }; + + spi0: spi@ff1c0000 { + compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff1c0000 0x0 0x1000>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@ff1d0000 { + compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff1d0000 0x0 0x1000>; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@ff1e0000 { + compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff1e0000 0x0 0x1000>; + clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@ff1f0000 { + compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff1f0000 0x0 0x1000>; + clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@ff200000 { + compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff200000 0x0 0x1000>; + clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pmugrf: syscon@ff320000 { + compatible = "rockchip,rk3399-pmugrf", "syscon"; + reg = <0x0 0xff320000 0x0 0x1000>; + }; + + spi3: spi@ff350000 { + compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff350000 0x0 0x1000>; + clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart4: serial@ff370000 { + compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff370000 0x0 0x100>; + clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer>; + status = "disabled"; + }; + + pwm0: pwm@ff420000 { + compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; + reg = <0x0 0xff420000 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + clocks = <&pmucru PCLK_RKPWM_PMU>; + clock-names = "pwm"; + status = "disabled"; + }; + + pwm1: pwm@ff420010 { + compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; + reg = <0x0 0xff420010 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + clocks = <&pmucru PCLK_RKPWM_PMU>; + clock-names = "pwm"; + status = "disabled"; + }; + + pwm2: pwm@ff420020 { + compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; + reg = <0x0 0xff420020 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + clocks = <&pmucru PCLK_RKPWM_PMU>; + clock-names = "pwm"; + status = "disabled"; + }; + + pwm3: pwm@ff420030 { + compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; + reg = <0x0 0xff420030 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3a_pin>; + clocks = <&pmucru PCLK_RKPWM_PMU>; + clock-names = "pwm"; + status = "disabled"; + }; + + pmucru: pmu-clock-controller@ff750000 { + compatible = "rockchip,rk3399-pmucru"; + reg = <0x0 0xff750000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + assigned-clocks = <&pmucru PLL_PPLL>; + assigned-clock-rates = <676000000>; + }; + + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3399-cru"; + reg = <0x0 0xff760000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + grf: syscon@ff770000 { + compatible = "rockchip,rk3399-grf", "syscon"; + reg = <0x0 0xff770000 0x0 0x10000>; + }; + + watchdog@ff840000 { + compatible = "snps,dw-wdt"; + reg = <0x0 0xff840000 0x0 0x100>; + clocks = <&cru PCLK_WDT>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + }; + + spdif: spdif@ff870000 { + compatible = "rockchip,rk3399-spdif"; + reg = <0x0 0xff870000 0x0 0x1000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmac_bus 7>; + dma-names = "tx"; + clock-names = "mclk", "hclk"; + clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_bus>; + status = "disabled"; + }; + + i2s0: i2s@ff880000 { + compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff880000 0x0 0x1000>; + rockchip,grf = <&grf>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmac_bus 0>, <&dmac_bus 1>; + dma-names = "tx", "rx"; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_8ch_bus>; + status = "disabled"; + }; + + i2s1: i2s@ff890000 { + compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff890000 0x0 0x1000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmac_bus 2>, <&dmac_bus 3>; + dma-names = "tx", "rx"; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_2ch_bus>; + status = "disabled"; + }; + + i2s2: i2s@ff8a0000 { + compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff8a0000 0x0 0x1000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmac_bus 4>, <&dmac_bus 5>; + dma-names = "tx", "rx"; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>; + status = "disabled"; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3399-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmugrf>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio0@ff720000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff720000 0x0 0x100>; + clocks = <&pmucru PCLK_GPIO0_PMU>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <0x2>; + + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + gpio1: gpio1@ff730000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff730000 0x0 0x100>; + clocks = <&pmucru PCLK_GPIO1_PMU>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <0x2>; + + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + gpio2: gpio2@ff780000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff780000 0x0 0x100>; + clocks = <&cru PCLK_GPIO2>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <0x2>; + + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + gpio3: gpio3@ff788000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff788000 0x0 0x100>; + clocks = <&cru PCLK_GPIO3>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <0x2>; + + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + gpio4: gpio4@ff790000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff790000 0x0 0x100>; + clocks = <&cru PCLK_GPIO4>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <0x2>; + + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_12ma: pcfg-pull-none-12ma { + bias-disable; + drive-strength = <12>; + }; + + pcfg_pull_up_8ma: pcfg-pull-up-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_pull_down_4ma: pcfg-pull-down-4ma { + bias-pull-down; + drive-strength = <4>; + }; + + pcfg_pull_up_2ma: pcfg-pull-up-2ma { + bias-pull-up; + drive-strength = <2>; + }; + + pcfg_pull_down_12ma: pcfg-pull-down-12ma { + bias-pull-down; + drive-strength = <12>; + }; + + pcfg_pull_none_13ma: pcfg-pull-none-13ma { + bias-disable; + drive-strength = <13>; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = + <1 15 RK_FUNC_2 &pcfg_pull_none>, + <1 16 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = + <4 2 RK_FUNC_1 &pcfg_pull_none>, + <4 1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = + <2 1 RK_FUNC_2 &pcfg_pull_none_12ma>, + <2 0 RK_FUNC_2 &pcfg_pull_none_12ma>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = + <4 17 RK_FUNC_1 &pcfg_pull_none>, + <4 16 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c4 { + i2c4_xfer: i2c4-xfer { + rockchip,pins = + <1 12 RK_FUNC_1 &pcfg_pull_none>, + <1 11 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c5 { + i2c5_xfer: i2c5-xfer { + rockchip,pins = + <3 11 RK_FUNC_2 &pcfg_pull_none>, + <3 10 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + i2c6 { + i2c6_xfer: i2c6-xfer { + rockchip,pins = + <2 10 RK_FUNC_2 &pcfg_pull_none>, + <2 9 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + i2c7 { + i2c7_xfer: i2c7-xfer { + rockchip,pins = + <2 8 RK_FUNC_2 &pcfg_pull_none>, + <2 7 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + i2c8 { + i2c8_xfer: i2c8-xfer { + rockchip,pins = + <1 21 RK_FUNC_1 &pcfg_pull_none>, + <1 20 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2s0 { + i2s0_8ch_bus: i2s0-8ch-bus { + rockchip,pins = + <3 24 RK_FUNC_1 &pcfg_pull_none>, + <3 25 RK_FUNC_1 &pcfg_pull_none>, + <3 26 RK_FUNC_1 &pcfg_pull_none>, + <3 27 RK_FUNC_1 &pcfg_pull_none>, + <3 28 RK_FUNC_1 &pcfg_pull_none>, + <3 29 RK_FUNC_1 &pcfg_pull_none>, + <3 30 RK_FUNC_1 &pcfg_pull_none>, + <3 31 RK_FUNC_1 &pcfg_pull_none>, + <4 0 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2s1 { + i2s1_2ch_bus: i2s1-2ch-bus { + rockchip,pins = + <4 3 RK_FUNC_1 &pcfg_pull_none>, + <4 4 RK_FUNC_1 &pcfg_pull_none>, + <4 5 RK_FUNC_1 &pcfg_pull_none>, + <4 6 RK_FUNC_1 &pcfg_pull_none>, + <4 7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + spdif { + spdif_bus: spdif-bus { + rockchip,pins = + <4 21 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = + <3 6 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_cs0: spi0-cs0 { + rockchip,pins = + <3 7 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_cs1: spi0-cs1 { + rockchip,pins = + <3 8 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_tx: spi0-tx { + rockchip,pins = + <3 5 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_rx: spi0-rx { + rockchip,pins = + <3 4 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = + <1 9 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_cs0: spi1-cs0 { + rockchip,pins = + <1 10 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_rx: spi1-rx { + rockchip,pins = + <1 7 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_tx: spi1-tx { + rockchip,pins = + <1 8 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + spi2 { + spi2_clk: spi2-clk { + rockchip,pins = + <2 11 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_cs0: spi2-cs0 { + rockchip,pins = + <2 12 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_rx: spi2-rx { + rockchip,pins = + <2 9 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_tx: spi2-tx { + rockchip,pins = + <2 10 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + spi3 { + spi3_clk: spi3-clk { + rockchip,pins = + <1 17 RK_FUNC_1 &pcfg_pull_up>; + }; + spi3_cs0: spi3-cs0 { + rockchip,pins = + <1 18 RK_FUNC_1 &pcfg_pull_up>; + }; + spi3_rx: spi3-rx { + rockchip,pins = + <1 15 RK_FUNC_1 &pcfg_pull_up>; + }; + spi3_tx: spi3-tx { + rockchip,pins = + <1 16 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + spi4 { + spi4_clk: spi4-clk { + rockchip,pins = + <3 2 RK_FUNC_2 &pcfg_pull_up>; + }; + spi4_cs0: spi4-cs0 { + rockchip,pins = + <3 3 RK_FUNC_2 &pcfg_pull_up>; + }; + spi4_rx: spi4-rx { + rockchip,pins = + <3 0 RK_FUNC_2 &pcfg_pull_up>; + }; + spi4_tx: spi4-tx { + rockchip,pins = + <3 1 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + spi5 { + spi5_clk: spi5-clk { + rockchip,pins = + <2 22 RK_FUNC_2 &pcfg_pull_up>; + }; + spi5_cs0: spi5-cs0 { + rockchip,pins = + <2 23 RK_FUNC_2 &pcfg_pull_up>; + }; + spi5_rx: spi5-rx { + rockchip,pins = + <2 20 RK_FUNC_2 &pcfg_pull_up>; + }; + spi5_tx: spi5-tx { + rockchip,pins = + <2 21 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = + <2 16 RK_FUNC_1 &pcfg_pull_up>, + <2 17 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = + <2 18 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = + <2 19 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = + <3 12 RK_FUNC_2 &pcfg_pull_up>, + <3 13 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + uart2a { + uart2a_xfer: uart2a-xfer { + rockchip,pins = + <4 8 RK_FUNC_2 &pcfg_pull_up>, + <4 9 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + uart2b { + uart2b_xfer: uart2b-xfer { + rockchip,pins = + <4 16 RK_FUNC_2 &pcfg_pull_up>, + <4 17 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + uart2c { + uart2c_xfer: uart2c-xfer { + rockchip,pins = + <4 19 RK_FUNC_1 &pcfg_pull_up>, + <4 20 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = + <3 14 RK_FUNC_2 &pcfg_pull_up>, + <3 15 RK_FUNC_2 &pcfg_pull_none>; + }; + + uart3_cts: uart3-cts { + rockchip,pins = + <3 18 RK_FUNC_2 &pcfg_pull_none>; + }; + + uart3_rts: uart3-rts { + rockchip,pins = + <3 19 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + uart4 { + uart4_xfer: uart4-xfer { + rockchip,pins = + <1 7 RK_FUNC_1 &pcfg_pull_up>, + <1 8 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uarthdcp { + uarthdcp_xfer: uarthdcp-xfer { + rockchip,pins = + <4 21 RK_FUNC_2 &pcfg_pull_up>, + <4 22 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = + <4 18 RK_FUNC_1 &pcfg_pull_none>; + }; + + vop0_pwm_pin: vop0-pwm-pin { + rockchip,pins = + <4 18 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = + <4 22 RK_FUNC_1 &pcfg_pull_none>; + }; + + vop1_pwm_pin: vop1-pwm-pin { + rockchip,pins = + <4 18 RK_FUNC_3 &pcfg_pull_none>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = + <1 19 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + pwm3a { + pwm3a_pin: pwm3a-pin { + rockchip,pins = + <0 6 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + pwm3b { + pwm3b_pin: pwm3b-pin { + rockchip,pins = + <1 14 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts index b0ed44313a5b..2adad8c8cd27 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts @@ -44,6 +44,7 @@ /dts-v1/; /include/ "uniphier-ph1-ld20.dtsi" +/include/ "uniphier-ref-daughter.dtsi" /include/ "uniphier-support-card.dtsi" / { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi index 651c9d9d2d54..95328808e3c1 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi @@ -106,6 +106,12 @@ }; clocks { + refclk: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + uart_clk: uart_clk { #clock-cells = <0>; compatible = "fixed-clock"; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi new file mode 120000 index 000000000000..4685a8d89cba --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi @@ -0,0 +1 @@ +../../../../arm/boot/dts/uniphier-ref-daughter.dtsi
\ No newline at end of file diff --git a/include/dt-bindings/clock/rk3399-cru.h b/include/dt-bindings/clock/rk3399-cru.h new file mode 100644 index 000000000000..50a44cffb070 --- /dev/null +++ b/include/dt-bindings/clock/rk3399-cru.h @@ -0,0 +1,755 @@ +/* + * Copyright (c) 2016 Rockchip Electronics Co. Ltd. + * Author: Xing Zheng <zhengxing@rock-chips.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3399_H +#define _DT_BINDINGS_CLK_ROCKCHIP_RK3399_H + +/* core clocks */ +#define PLL_APLLL 1 +#define PLL_APLLB 2 +#define PLL_DPLL 3 +#define PLL_CPLL 4 +#define PLL_GPLL 5 +#define PLL_NPLL 6 +#define PLL_VPLL 7 +#define ARMCLKL 8 +#define ARMCLKB 9 + +/* sclk gates (special clocks) */ +#define SCLK_I2C1 65 +#define SCLK_I2C2 66 +#define SCLK_I2C3 67 +#define SCLK_I2C5 68 +#define SCLK_I2C6 69 +#define SCLK_I2C7 70 +#define SCLK_SPI0 71 +#define SCLK_SPI1 72 +#define SCLK_SPI2 73 +#define SCLK_SPI4 74 +#define SCLK_SPI5 75 +#define SCLK_SDMMC 76 +#define SCLK_SDIO 77 +#define SCLK_EMMC 78 +#define SCLK_TSADC 79 +#define SCLK_SARADC 80 +#define SCLK_UART0 81 +#define SCLK_UART1 82 +#define SCLK_UART2 83 +#define SCLK_UART3 84 +#define SCLK_SPDIF_8CH 85 +#define SCLK_I2S0_8CH 86 +#define SCLK_I2S1_8CH 87 +#define SCLK_I2S2_8CH 88 +#define SCLK_I2S_8CH_OUT 89 +#define SCLK_TIMER00 90 +#define SCLK_TIMER01 91 +#define SCLK_TIMER02 92 +#define SCLK_TIMER03 93 +#define SCLK_TIMER04 94 +#define SCLK_TIMER05 95 +#define SCLK_TIMER06 96 +#define SCLK_TIMER07 97 +#define SCLK_TIMER08 98 +#define SCLK_TIMER09 99 +#define SCLK_TIMER10 100 +#define SCLK_TIMER11 101 +#define SCLK_MACREF 102 +#define SCLK_MAC_RX 103 +#define SCLK_MAC_TX 104 +#define SCLK_MAC 105 +#define SCLK_MACREF_OUT 106 +#define SCLK_VOP0_PWM 107 +#define SCLK_VOP1_PWM 108 +#define SCLK_RGA_CORE 109 +#define SCLK_ISP0 110 +#define SCLK_ISP1 111 +#define SCLK_HDMI_CEC 112 +#define SCLK_HDMI_SFR 113 +#define SCLK_DP_CORE 114 +#define SCLK_PVTM_CORE_L 115 +#define SCLK_PVTM_CORE_B 116 +#define SCLK_PVTM_GPU 117 +#define SCLK_PVTM_DDR 118 +#define SCLK_MIPIDPHY_REF 119 +#define SCLK_MIPIDPHY_CFG 120 +#define SCLK_HSICPHY 121 +#define SCLK_USBPHY480M 122 +#define SCLK_USB2PHY0_REF 123 +#define SCLK_USB2PHY1_REF 124 +#define SCLK_UPHY0_TCPDPHY_REF 125 +#define SCLK_UPHY0_TCPDCORE 126 +#define SCLK_UPHY1_TCPDPHY_REF 127 +#define SCLK_UPHY1_TCPDCORE 128 +#define SCLK_USB3OTG0_REF 129 +#define SCLK_USB3OTG1_REF 130 +#define SCLK_USB3OTG0_SUSPEND 131 +#define SCLK_USB3OTG1_SUSPEND 132 +#define SCLK_CRYPTO0 133 +#define SCLK_CRYPTO1 134 +#define SCLK_CCI_TRACE 135 +#define SCLK_CS 136 +#define SCLK_CIF_OUT 137 +#define SCLK_PCIEPHY_REF 138 +#define SCLK_PCIE_CORE 139 +#define SCLK_M0_PERILP 140 +#define SCLK_M0_PERILP_DEC 141 +#define SCLK_CM0S 142 +#define SCLK_DBG_NOC 143 +#define SCLK_DBG_PD_CORE_B 144 +#define SCLK_DBG_PD_CORE_L 145 +#define SCLK_DFIMON0_TIMER 146 +#define SCLK_DFIMON1_TIMER 147 +#define SCLK_INTMEM0 148 +#define SCLK_INTMEM1 149 +#define SCLK_INTMEM2 150 +#define SCLK_INTMEM3 151 +#define SCLK_INTMEM4 152 +#define SCLK_INTMEM5 153 +#define SCLK_SDMMC_DRV 154 +#define SCLK_SDMMC_SAMPLE 155 +#define SCLK_SDIO_DRV 156 +#define SCLK_SDIO_SAMPLE 157 +#define SCLK_VDU_CORE 158 +#define SCLK_VDU_CA 159 +#define SCLK_PCIE_PM 160 +#define SCLK_SPDIF_REC_DPTX 161 +#define SCLK_DPHY_PLL 162 +#define SCLK_DPHY_TX0_CFG 163 +#define SCLK_DPHY_TX1RX1_CFG 164 +#define SCLK_DPHY_RX0_CFG 165 +#define SCLK_RMII_SRC 166 +#define SCLK_PCIEPHY_REF100M 167 + +#define DCLK_VOP0 180 +#define DCLK_VOP1 181 +#define DCLK_VOP0_DIV 182 +#define DCLK_VOP1_DIV 183 +#define DCLK_M0_PERILP 184 + +#define FCLK_CM0S 190 + +/* aclk gates */ +#define ACLK_PERIHP 192 +#define ACLK_PERIHP_NOC 193 +#define ACLK_PERILP0 194 +#define ACLK_PERILP0_NOC 195 +#define ACLK_PERF_PCIE 196 +#define ACLK_PCIE 197 +#define ACLK_INTMEM 198 +#define ACLK_TZMA 199 +#define ACLK_DCF 200 +#define ACLK_CCI 201 +#define ACLK_CCI_NOC0 202 +#define ACLK_CCI_NOC1 203 +#define ACLK_CCI_GRF 204 +#define ACLK_CENTER 205 +#define ACLK_CENTER_MAIN_NOC 206 +#define ACLK_CENTER_PERI_NOC 207 +#define ACLK_GPU 208 +#define ACLK_PERF_GPU 209 +#define ACLK_GPU_GRF 210 +#define ACLK_DMAC0_PERILP 211 +#define ACLK_DMAC1_PERILP 212 +#define ACLK_GMAC 213 +#define ACLK_GMAC_NOC 214 +#define ACLK_PERF_GMAC 215 +#define ACLK_VOP0_NOC 216 +#define ACLK_VOP0 217 +#define ACLK_VOP1_NOC 218 +#define ACLK_VOP1 219 +#define ACLK_RGA 220 +#define ACLK_RGA_NOC 221 +#define ACLK_HDCP 222 +#define ACLK_HDCP_NOC 223 +#define ACLK_HDCP22 224 +#define ACLK_IEP 225 +#define ACLK_IEP_NOC 226 +#define ACLK_VIO 227 +#define ACLK_VIO_NOC 228 +#define ACLK_ISP0 229 +#define ACLK_ISP1 230 +#define ACLK_ISP0_NOC 231 +#define ACLK_ISP1_NOC 232 +#define ACLK_ISP0_WRAPPER 233 +#define ACLK_ISP1_WRAPPER 234 +#define ACLK_VCODEC 235 +#define ACLK_VCODEC_NOC 236 +#define ACLK_VDU 237 +#define ACLK_VDU_NOC 238 +#define ACLK_PERI 239 +#define ACLK_EMMC 240 +#define ACLK_EMMC_CORE 241 +#define ACLK_EMMC_NOC 242 +#define ACLK_EMMC_GRF 243 +#define ACLK_USB3 244 +#define ACLK_USB3_NOC 245 +#define ACLK_USB3OTG0 246 +#define ACLK_USB3OTG1 247 +#define ACLK_USB3_RKSOC_AXI_PERF 248 +#define ACLK_USB3_GRF 249 +#define ACLK_GIC 250 +#define ACLK_GIC_NOC 251 +#define ACLK_GIC_ADB400_CORE_L_2_GIC 252 +#define ACLK_GIC_ADB400_CORE_B_2_GIC 253 +#define ACLK_GIC_ADB400_GIC_2_CORE_L 254 +#define ACLK_GIC_ADB400_GIC_2_CORE_B 255 +#define ACLK_CORE_ADB400_CORE_L_2_CCI500 256 +#define ACLK_CORE_ADB400_CORE_B_2_CCI500 257 +#define ACLK_ADB400M_PD_CORE_L 258 +#define ACLK_ADB400M_PD_CORE_B 259 +#define ACLK_PERF_CORE_L 260 +#define ACLK_PERF_CORE_B 261 +#define ACLK_GIC_PRE 262 +#define ACLK_VOP0_PRE 263 +#define ACLK_VOP1_PRE 264 + +/* pclk gates */ +#define PCLK_PERIHP 320 +#define PCLK_PERIHP_NOC 321 +#define PCLK_PERILP0 322 +#define PCLK_PERILP1 323 +#define PCLK_PERILP1_NOC 324 +#define PCLK_PERILP_SGRF 325 +#define PCLK_PERIHP_GRF 326 +#define PCLK_PCIE 327 +#define PCLK_SGRF 328 +#define PCLK_INTR_ARB 329 +#define PCLK_CENTER_MAIN_NOC 330 +#define PCLK_CIC 331 +#define PCLK_COREDBG_B 332 +#define PCLK_COREDBG_L 333 +#define PCLK_DBG_CXCS_PD_CORE_B 334 +#define PCLK_DCF 335 +#define PCLK_GPIO2 336 +#define PCLK_GPIO3 337 +#define PCLK_GPIO4 338 +#define PCLK_GRF 339 +#define PCLK_HSICPHY 340 +#define PCLK_I2C1 341 +#define PCLK_I2C2 342 +#define PCLK_I2C3 343 +#define PCLK_I2C5 344 +#define PCLK_I2C6 345 +#define PCLK_I2C7 346 +#define PCLK_SPI0 347 +#define PCLK_SPI1 348 +#define PCLK_SPI2 349 +#define PCLK_SPI4 350 +#define PCLK_SPI5 351 +#define PCLK_UART0 352 +#define PCLK_UART1 353 +#define PCLK_UART2 354 +#define PCLK_UART3 355 +#define PCLK_TSADC 356 +#define PCLK_SARADC 357 +#define PCLK_GMAC 358 +#define PCLK_GMAC_NOC 359 +#define PCLK_TIMER0 360 +#define PCLK_TIMER1 361 +#define PCLK_EDP 362 +#define PCLK_EDP_NOC 363 +#define PCLK_EDP_CTRL 364 +#define PCLK_VIO 365 +#define PCLK_VIO_NOC 366 +#define PCLK_VIO_GRF 367 +#define PCLK_MIPI_DSI0 368 +#define PCLK_MIPI_DSI1 369 +#define PCLK_HDCP 370 +#define PCLK_HDCP_NOC 371 +#define PCLK_HDMI_CTRL 372 +#define PCLK_DP_CTRL 373 +#define PCLK_HDCP22 374 +#define PCLK_GASKET 375 +#define PCLK_DDR 376 +#define PCLK_DDR_MON 377 +#define PCLK_DDR_SGRF 378 +#define PCLK_ISP1_WRAPPER 379 +#define PCLK_WDT 380 +#define PCLK_EFUSE1024NS 381 +#define PCLK_EFUSE1024S 382 +#define PCLK_PMU_INTR_ARB 383 +#define PCLK_MAILBOX0 384 +#define PCLK_USBPHY_MUX_G 385 +#define PCLK_UPHY0_TCPHY_G 386 +#define PCLK_UPHY0_TCPD_G 387 +#define PCLK_UPHY1_TCPHY_G 388 +#define PCLK_UPHY1_TCPD_G 389 +#define PCLK_ALIVE 390 + +/* hclk gates */ +#define HCLK_PERIHP 448 +#define HCLK_PERILP0 449 +#define HCLK_PERILP1 450 +#define HCLK_PERILP0_NOC 451 +#define HCLK_PERILP1_NOC 452 +#define HCLK_M0_PERILP 453 +#define HCLK_M0_PERILP_NOC 454 +#define HCLK_AHB1TOM 455 +#define HCLK_HOST0 456 +#define HCLK_HOST0_ARB 457 +#define HCLK_HOST1 458 +#define HCLK_HOST1_ARB 459 +#define HCLK_HSIC 460 +#define HCLK_SD 461 +#define HCLK_SDMMC 462 +#define HCLK_SDMMC_NOC 463 +#define HCLK_M_CRYPTO0 464 +#define HCLK_M_CRYPTO1 465 +#define HCLK_S_CRYPTO0 466 +#define HCLK_S_CRYPTO1 467 +#define HCLK_I2S0_8CH 468 +#define HCLK_I2S1_8CH 469 +#define HCLK_I2S2_8CH 470 +#define HCLK_SPDIF 471 +#define HCLK_VOP0_NOC 472 +#define HCLK_VOP0 473 +#define HCLK_VOP1_NOC 474 +#define HCLK_VOP1 475 +#define HCLK_ROM 476 +#define HCLK_IEP 477 +#define HCLK_IEP_NOC 478 +#define HCLK_ISP0 479 +#define HCLK_ISP1 480 +#define HCLK_ISP0_NOC 481 +#define HCLK_ISP1_NOC 482 +#define HCLK_ISP0_WRAPPER 483 +#define HCLK_ISP1_WRAPPER 484 +#define HCLK_RGA 485 +#define HCLK_RGA_NOC 486 +#define HCLK_HDCP 487 +#define HCLK_HDCP_NOC 488 +#define HCLK_HDCP22 489 +#define HCLK_VCODEC 490 +#define HCLK_VCODEC_NOC 491 +#define HCLK_VDU 492 +#define HCLK_VDU_NOC 493 +#define HCLK_SDIO 494 +#define HCLK_SDIO_NOC 495 +#define HCLK_SDIOAUDIO_NOC 496 + +#define CLK_NR_CLKS (HCLK_SDIOAUDIO_NOC + 1) + +/* pmu-clocks indices */ + +#define PLL_PPLL 1 + +#define SCLK_32K_SUSPEND_PMU 2 +#define SCLK_SPI3_PMU 3 +#define SCLK_TIMER12_PMU 4 +#define SCLK_TIMER13_PMU 5 +#define SCLK_UART4_PMU 6 +#define SCLK_PVTM_PMU 7 +#define SCLK_WIFI_PMU 8 +#define SCLK_I2C0_PMU 9 +#define SCLK_I2C4_PMU 10 +#define SCLK_I2C8_PMU 11 + +#define PCLK_SRC_PMU 19 +#define PCLK_PMU 20 +#define PCLK_PMUGRF_PMU 21 +#define PCLK_INTMEM1_PMU 22 +#define PCLK_GPIO0_PMU 23 +#define PCLK_GPIO1_PMU 24 +#define PCLK_SGRF_PMU 25 +#define PCLK_NOC_PMU 26 +#define PCLK_I2C0_PMU 27 +#define PCLK_I2C4_PMU 28 +#define PCLK_I2C8_PMU 29 +#define PCLK_RKPWM_PMU 30 +#define PCLK_SPI3_PMU 31 +#define PCLK_TIMER_PMU 32 +#define PCLK_MAILBOX_PMU 33 +#define PCLK_UART4_PMU 34 +#define PCLK_WDT_M0_PMU 35 + +#define FCLK_CM0S_SRC_PMU 44 +#define FCLK_CM0S_PMU 45 +#define SCLK_CM0S_PMU 46 +#define HCLK_CM0S_PMU 47 +#define DCLK_CM0S_PMU 48 +#define PCLK_INTR_ARB_PMU 49 +#define HCLK_NOC_PMU 50 + +#define CLKPMU_NR_CLKS (HCLK_NOC_PMU + 1) + +/* soft-reset indices */ + +/* cru_softrst_con0 */ +#define SRST_CORE_L0 0 +#define SRST_CORE_B0 1 +#define SRST_CORE_PO_L0 2 +#define SRST_CORE_PO_B0 3 +#define SRST_L2_L 4 +#define SRST_L2_B 5 +#define SRST_ADB_L 6 +#define SRST_ADB_B 7 +#define SRST_A_CCI 8 +#define SRST_A_CCIM0_NOC 9 +#define SRST_A_CCIM1_NOC 10 +#define SRST_DBG_NOC 11 + +/* cru_softrst_con1 */ +#define SRST_CORE_L0_T 16 +#define SRST_CORE_L1 17 +#define SRST_CORE_L2 18 +#define SRST_CORE_L3 19 +#define SRST_CORE_PO_L0_T 20 +#define SRST_CORE_PO_L1 21 +#define SRST_CORE_PO_L2 22 +#define SRST_CORE_PO_L3 23 +#define SRST_A_ADB400_GIC2COREL 24 +#define SRST_A_ADB400_COREL2GIC 25 +#define SRST_P_DBG_L 26 +#define SRST_L2_L_T 28 +#define SRST_ADB_L_T 29 +#define SRST_A_RKPERF_L 30 +#define SRST_PVTM_CORE_L 31 + +/* cru_softrst_con2 */ +#define SRST_CORE_B0_T 32 +#define SRST_CORE_B1 33 +#define SRST_CORE_PO_B0_T 36 +#define SRST_CORE_PO_B1 37 +#define SRST_A_ADB400_GIC2COREB 40 +#define SRST_A_ADB400_COREB2GIC 41 +#define SRST_P_DBG_B 42 +#define SRST_L2_B_T 43 +#define SRST_ADB_B_T 45 +#define SRST_A_RKPERF_B 46 +#define SRST_PVTM_CORE_B 47 + +/* cru_softrst_con3 */ +#define SRST_A_CCI_T 50 +#define SRST_A_CCIM0_NOC_T 51 +#define SRST_A_CCIM1_NOC_T 52 +#define SRST_A_ADB400M_PD_CORE_B_T 53 +#define SRST_A_ADB400M_PD_CORE_L_T 54 +#define SRST_DBG_NOC_T 55 +#define SRST_DBG_CXCS 56 +#define SRST_CCI_TRACE 57 +#define SRST_P_CCI_GRF 58 + +/* cru_softrst_con4 */ +#define SRST_A_CENTER_MAIN_NOC 64 +#define SRST_A_CENTER_PERI_NOC 65 +#define SRST_P_CENTER_MAIN 66 +#define SRST_P_DDRMON 67 +#define SRST_P_CIC 68 +#define SRST_P_CENTER_SGRF 69 +#define SRST_DDR0_MSCH 70 +#define SRST_DDRCFG0_MSCH 71 +#define SRST_DDR0 72 +#define SRST_DDRPHY0 73 +#define SRST_DDR1_MSCH 74 +#define SRST_DDRCFG1_MSCH 75 +#define SRST_DDR1 76 +#define SRST_DDRPHY1 77 +#define SRST_DDR_CIC 78 +#define SRST_PVTM_DDR 79 + +/* cru_softrst_con5 */ +#define SRST_A_VCODEC_NOC 80 +#define SRST_A_VCODEC 81 +#define SRST_H_VCODEC_NOC 82 +#define SRST_H_VCODEC 83 +#define SRST_A_VDU_NOC 88 +#define SRST_A_VDU 89 +#define SRST_H_VDU_NOC 90 +#define SRST_H_VDU 91 +#define SRST_VDU_CORE 92 +#define SRST_VDU_CA 93 + +/* cru_softrst_con6 */ +#define SRST_A_IEP_NOC 96 +#define SRST_A_VOP_IEP 97 +#define SRST_A_IEP 98 +#define SRST_H_IEP_NOC 99 +#define SRST_H_IEP 100 +#define SRST_A_RGA_NOC 102 +#define SRST_A_RGA 103 +#define SRST_H_RGA_NOC 104 +#define SRST_H_RGA 105 +#define SRST_RGA_CORE 106 +#define SRST_EMMC_NOC 108 +#define SRST_EMMC 109 +#define SRST_EMMC_GRF 110 + +/* cru_softrst_con7 */ +#define SRST_A_PERIHP_NOC 112 +#define SRST_P_PERIHP_GRF 113 +#define SRST_H_PERIHP_NOC 114 +#define SRST_USBHOST0 115 +#define SRST_HOSTC0_AUX 116 +#define SRST_HOST0_ARB 117 +#define SRST_USBHOST1 118 +#define SRST_HOSTC1_AUX 119 +#define SRST_HOST1_ARB 120 +#define SRST_SDIO0 121 +#define SRST_SDMMC 122 +#define SRST_HSIC 123 +#define SRST_HSIC_AUX 124 +#define SRST_AHB1TOM 125 +#define SRST_P_PERIHP_NOC 126 +#define SRST_HSICPHY 127 + +/* cru_softrst_con8 */ +#define SRST_A_PCIE 128 +#define SRST_P_PCIE 129 +#define SRST_PCIE_CORE 130 +#define SRST_PCIE_MGMT 131 +#define SRST_PCIE_MGMT_STICKY 132 +#define SRST_PCIE_PIPE 133 +#define SRST_PCIE_PM 134 +#define SRST_PCIEPHY 135 +#define SRST_A_GMAC_NOC 136 +#define SRST_A_GMAC 137 +#define SRST_P_GMAC_NOC 138 +#define SRST_P_GMAC_GRF 140 +#define SRST_HSICPHY_POR 142 +#define SRST_HSICPHY_UTMI 143 + +/* cru_softrst_con9 */ +#define SRST_USB2PHY0_POR 144 +#define SRST_USB2PHY0_UTMI_PORT0 145 +#define SRST_USB2PHY0_UTMI_PORT1 146 +#define SRST_USB2PHY0_EHCIPHY 147 +#define SRST_UPHY0_PIPE_L00 148 +#define SRST_UPHY0 149 +#define SRST_UPHY0_TCPDPWRUP 150 +#define SRST_USB2PHY1_POR 152 +#define SRST_USB2PHY1_UTMI_PORT0 153 +#define SRST_USB2PHY1_UTMI_PORT1 154 +#define SRST_USB2PHY1_EHCIPHY 155 +#define SRST_UPHY1_PIPE_L00 156 +#define SRST_UPHY1 157 +#define SRST_UPHY1_TCPDPWRUP 158 + +/* cru_softrst_con10 */ +#define SRST_A_PERILP0_NOC 160 +#define SRST_A_DCF 161 +#define SRST_GIC500 162 +#define SRST_DMAC0_PERILP0 163 +#define SRST_DMAC1_PERILP0 164 +#define SRST_TZMA 165 +#define SRST_INTMEM 166 +#define SRST_ADB400_MST0 167 +#define SRST_ADB400_MST1 168 +#define SRST_ADB400_SLV0 169 +#define SRST_ADB400_SLV1 170 +#define SRST_H_PERILP0 171 +#define SRST_H_PERILP0_NOC 172 +#define SRST_ROM 173 +#define SRST_CRYPTO_S 174 +#define SRST_CRYPTO_M 175 + +/* cru_softrst_con11 */ +#define SRST_P_DCF 176 +#define SRST_CM0S_NOC 177 +#define SRST_CM0S 178 +#define SRST_CM0S_DBG 179 +#define SRST_CM0S_PO 180 +#define SRST_CRYPTO 181 +#define SRST_P_PERILP1_SGRF 182 +#define SRST_P_PERILP1_GRF 183 +#define SRST_CRYPTO1_S 184 +#define SRST_CRYPTO1_M 185 +#define SRST_CRYPTO1 186 +#define SRST_GIC_NOC 188 +#define SRST_SD_NOC 189 +#define SRST_SDIOAUDIO_BRG 190 + +/* cru_softrst_con12 */ +#define SRST_H_PERILP1 192 +#define SRST_H_PERILP1_NOC 193 +#define SRST_H_I2S0_8CH 194 +#define SRST_H_I2S1_8CH 195 +#define SRST_H_I2S2_8CH 196 +#define SRST_H_SPDIF_8CH 197 +#define SRST_P_PERILP1_NOC 198 +#define SRST_P_EFUSE_1024 199 +#define SRST_P_EFUSE_1024S 200 +#define SRST_P_I2C0 201 +#define SRST_P_I2C1 202 +#define SRST_P_I2C2 203 +#define SRST_P_I2C3 204 +#define SRST_P_I2C4 205 +#define SRST_P_I2C5 206 +#define SRST_P_MAILBOX0 207 + +/* cru_softrst_con13 */ +#define SRST_P_UART0 208 +#define SRST_P_UART1 209 +#define SRST_P_UART2 210 +#define SRST_P_UART3 211 +#define SRST_P_SARADC 212 +#define SRST_P_TSADC 213 +#define SRST_P_SPI0 214 +#define SRST_P_SPI1 215 +#define SRST_P_SPI2 216 +#define SRST_P_SPI3 217 +#define SRST_P_SPI4 218 +#define SRST_SPI0 219 +#define SRST_SPI1 220 +#define SRST_SPI2 221 +#define SRST_SPI3 222 +#define SRST_SPI4 223 + +/* cru_softrst_con14 */ +#define SRST_I2S0_8CH 224 +#define SRST_I2S1_8CH 225 +#define SRST_I2S2_8CH 226 +#define SRST_SPDIF_8CH 227 +#define SRST_UART0 228 +#define SRST_UART1 229 +#define SRST_UART2 230 +#define SRST_UART3 231 +#define SRST_TSADC 232 +#define SRST_I2C0 233 +#define SRST_I2C1 234 +#define SRST_I2C2 235 +#define SRST_I2C3 236 +#define SRST_I2C4 237 +#define SRST_I2C5 238 +#define SRST_SDIOAUDIO_NOC 239 + +/* cru_softrst_con15 */ +#define SRST_A_VIO_NOC 240 +#define SRST_A_HDCP_NOC 241 +#define SRST_A_HDCP 242 +#define SRST_H_HDCP_NOC 243 +#define SRST_H_HDCP 244 +#define SRST_P_HDCP_NOC 245 +#define SRST_P_HDCP 246 +#define SRST_P_HDMI_CTRL 247 +#define SRST_P_DP_CTRL 248 +#define SRST_S_DP_CTRL 249 +#define SRST_C_DP_CTRL 250 +#define SRST_P_MIPI_DSI0 251 +#define SRST_P_MIPI_DSI1 252 +#define SRST_DP_CORE 253 +#define SRST_DP_I2S 254 + +/* cru_softrst_con16 */ +#define SRST_GASKET 256 +#define SRST_VIO_GRF 258 +#define SRST_DPTX_SPDIF_REC 259 +#define SRST_HDMI_CTRL 260 +#define SRST_HDCP_CTRL 261 +#define SRST_A_ISP0_NOC 262 +#define SRST_A_ISP1_NOC 263 +#define SRST_H_ISP0_NOC 266 +#define SRST_H_ISP1_NOC 267 +#define SRST_H_ISP0 268 +#define SRST_H_ISP1 269 +#define SRST_ISP0 270 +#define SRST_ISP1 271 + +/* cru_softrst_con17 */ +#define SRST_A_VOP0_NOC 272 +#define SRST_A_VOP1_NOC 273 +#define SRST_A_VOP0 274 +#define SRST_A_VOP1 275 +#define SRST_H_VOP0_NOC 276 +#define SRST_H_VOP1_NOC 277 +#define SRST_H_VOP0 278 +#define SRST_H_VOP1 279 +#define SRST_D_VOP0 280 +#define SRST_D_VOP1 281 +#define SRST_VOP0_PWM 282 +#define SRST_VOP1_PWM 283 +#define SRST_P_EDP_NOC 284 +#define SRST_P_EDP_CTRL 285 + +/* cru_softrst_con18 */ +#define SRST_A_GPU 288 +#define SRST_A_GPU_NOC 289 +#define SRST_A_GPU_GRF 290 +#define SRST_PVTM_GPU 291 +#define SRST_A_USB3_NOC 292 +#define SRST_A_USB3_OTG0 293 +#define SRST_A_USB3_OTG1 294 +#define SRST_A_USB3_GRF 295 +#define SRST_PMU 296 + +/* cru_softrst_con19 */ +#define SRST_P_TIMER0_5 304 +#define SRST_TIMER0 305 +#define SRST_TIMER1 306 +#define SRST_TIMER2 307 +#define SRST_TIMER3 308 +#define SRST_TIMER4 309 +#define SRST_TIMER5 310 +#define SRST_P_TIMER6_11 311 +#define SRST_TIMER6 312 +#define SRST_TIMER7 313 +#define SRST_TIMER8 314 +#define SRST_TIMER9 315 +#define SRST_TIMER10 316 +#define SRST_TIMER11 317 +#define SRST_P_INTR_ARB_PMU 318 +#define SRST_P_ALIVE_SGRF 319 + +/* cru_softrst_con20 */ +#define SRST_P_GPIO2 320 +#define SRST_P_GPIO3 321 +#define SRST_P_GPIO4 322 +#define SRST_P_GRF 323 +#define SRST_P_ALIVE_NOC 324 +#define SRST_P_WDT0 325 +#define SRST_P_WDT1 326 +#define SRST_P_INTR_ARB 327 +#define SRST_P_UPHY0_DPTX 328 +#define SRST_P_UPHY0_APB 330 +#define SRST_P_UPHY0_TCPHY 332 +#define SRST_P_UPHY1_TCPHY 333 +#define SRST_P_UPHY0_TCPDCTRL 334 +#define SRST_P_UPHY1_TCPDCTRL 335 + +/* pmu soft-reset indices */ + +/* pmu_cru_softrst_con0 */ +#define SRST_P_NOC 0 +#define SRST_P_INTMEM 1 +#define SRST_H_CM0S 2 +#define SRST_H_CM0S_NOC 3 +#define SRST_DBG_CM0S 4 +#define SRST_PO_CM0S 5 +#define SRST_P_SPI6 6 +#define SRST_SPI6 7 +#define SRST_P_TIMER_0_1 8 +#define SRST_P_TIMER_0 9 +#define SRST_P_TIMER_1 10 +#define SRST_P_UART4 11 +#define SRST_UART4 12 +#define SRST_P_WDT 13 + +/* pmu_cru_softrst_con1 */ +#define SRST_P_I2C6 16 +#define SRST_P_I2C7 17 +#define SRST_P_I2C8 18 +#define SRST_P_MAILBOX 19 +#define SRST_P_RKPWM 20 +#define SRST_P_PMUGRF 21 +#define SRST_P_SGRF 22 +#define SRST_P_GPIO0 23 +#define SRST_P_GPIO1 24 +#define SRST_P_CRU 25 +#define SRST_P_INTR 26 +#define SRST_PVTM 27 +#define SRST_I2C6 28 +#define SRST_I2C7 29 +#define SRST_I2C8 30 + +#endif diff --git a/include/dt-bindings/gpio/tegra-gpio.h b/include/dt-bindings/gpio/tegra-gpio.h index 197dc28b676e..a1c09e88e80b 100644 --- a/include/dt-bindings/gpio/tegra-gpio.h +++ b/include/dt-bindings/gpio/tegra-gpio.h @@ -12,40 +12,40 @@ #include <dt-bindings/gpio/gpio.h> -#define TEGRA_GPIO_BANK_ID_A 0 -#define TEGRA_GPIO_BANK_ID_B 1 -#define TEGRA_GPIO_BANK_ID_C 2 -#define TEGRA_GPIO_BANK_ID_D 3 -#define TEGRA_GPIO_BANK_ID_E 4 -#define TEGRA_GPIO_BANK_ID_F 5 -#define TEGRA_GPIO_BANK_ID_G 6 -#define TEGRA_GPIO_BANK_ID_H 7 -#define TEGRA_GPIO_BANK_ID_I 8 -#define TEGRA_GPIO_BANK_ID_J 9 -#define TEGRA_GPIO_BANK_ID_K 10 -#define TEGRA_GPIO_BANK_ID_L 11 -#define TEGRA_GPIO_BANK_ID_M 12 -#define TEGRA_GPIO_BANK_ID_N 13 -#define TEGRA_GPIO_BANK_ID_O 14 -#define TEGRA_GPIO_BANK_ID_P 15 -#define TEGRA_GPIO_BANK_ID_Q 16 -#define TEGRA_GPIO_BANK_ID_R 17 -#define TEGRA_GPIO_BANK_ID_S 18 -#define TEGRA_GPIO_BANK_ID_T 19 -#define TEGRA_GPIO_BANK_ID_U 20 -#define TEGRA_GPIO_BANK_ID_V 21 -#define TEGRA_GPIO_BANK_ID_W 22 -#define TEGRA_GPIO_BANK_ID_X 23 -#define TEGRA_GPIO_BANK_ID_Y 24 -#define TEGRA_GPIO_BANK_ID_Z 25 -#define TEGRA_GPIO_BANK_ID_AA 26 -#define TEGRA_GPIO_BANK_ID_BB 27 -#define TEGRA_GPIO_BANK_ID_CC 28 -#define TEGRA_GPIO_BANK_ID_DD 29 -#define TEGRA_GPIO_BANK_ID_EE 30 -#define TEGRA_GPIO_BANK_ID_FF 31 +#define TEGRA_GPIO_PORT_A 0 +#define TEGRA_GPIO_PORT_B 1 +#define TEGRA_GPIO_PORT_C 2 +#define TEGRA_GPIO_PORT_D 3 +#define TEGRA_GPIO_PORT_E 4 +#define TEGRA_GPIO_PORT_F 5 +#define TEGRA_GPIO_PORT_G 6 +#define TEGRA_GPIO_PORT_H 7 +#define TEGRA_GPIO_PORT_I 8 +#define TEGRA_GPIO_PORT_J 9 +#define TEGRA_GPIO_PORT_K 10 +#define TEGRA_GPIO_PORT_L 11 +#define TEGRA_GPIO_PORT_M 12 +#define TEGRA_GPIO_PORT_N 13 +#define TEGRA_GPIO_PORT_O 14 +#define TEGRA_GPIO_PORT_P 15 +#define TEGRA_GPIO_PORT_Q 16 +#define TEGRA_GPIO_PORT_R 17 +#define TEGRA_GPIO_PORT_S 18 +#define TEGRA_GPIO_PORT_T 19 +#define TEGRA_GPIO_PORT_U 20 +#define TEGRA_GPIO_PORT_V 21 +#define TEGRA_GPIO_PORT_W 22 +#define TEGRA_GPIO_PORT_X 23 +#define TEGRA_GPIO_PORT_Y 24 +#define TEGRA_GPIO_PORT_Z 25 +#define TEGRA_GPIO_PORT_AA 26 +#define TEGRA_GPIO_PORT_BB 27 +#define TEGRA_GPIO_PORT_CC 28 +#define TEGRA_GPIO_PORT_DD 29 +#define TEGRA_GPIO_PORT_EE 30 +#define TEGRA_GPIO_PORT_FF 31 -#define TEGRA_GPIO(bank, offset) \ - ((TEGRA_GPIO_BANK_ID_##bank * 8) + offset) +#define TEGRA_GPIO(port, offset) \ + ((TEGRA_GPIO_PORT_##port * 8) + offset) #endif diff --git a/include/dt-bindings/gpio/tegra186-gpio.h b/include/dt-bindings/gpio/tegra186-gpio.h new file mode 100644 index 000000000000..38001c7023f1 --- /dev/null +++ b/include/dt-bindings/gpio/tegra186-gpio.h @@ -0,0 +1,56 @@ +/* + * This header provides constants for binding nvidia,tegra186-gpio*. + * + * The first cell in Tegra's GPIO specifier is the GPIO ID. The macros below + * provide names for this. + * + * The second cell contains standard flag values specified in gpio.h. + */ + +#ifndef _DT_BINDINGS_GPIO_TEGRA_GPIO_H +#define _DT_BINDINGS_GPIO_TEGRA_GPIO_H + +#include <dt-bindings/gpio/gpio.h> + +/* GPIOs implemented by main GPIO controller */ +#define TEGRA_MAIN_GPIO_PORT_A 0 +#define TEGRA_MAIN_GPIO_PORT_B 1 +#define TEGRA_MAIN_GPIO_PORT_C 2 +#define TEGRA_MAIN_GPIO_PORT_D 3 +#define TEGRA_MAIN_GPIO_PORT_E 4 +#define TEGRA_MAIN_GPIO_PORT_F 5 +#define TEGRA_MAIN_GPIO_PORT_G 6 +#define TEGRA_MAIN_GPIO_PORT_H 7 +#define TEGRA_MAIN_GPIO_PORT_I 8 +#define TEGRA_MAIN_GPIO_PORT_J 9 +#define TEGRA_MAIN_GPIO_PORT_K 10 +#define TEGRA_MAIN_GPIO_PORT_L 11 +#define TEGRA_MAIN_GPIO_PORT_M 12 +#define TEGRA_MAIN_GPIO_PORT_N 13 +#define TEGRA_MAIN_GPIO_PORT_O 14 +#define TEGRA_MAIN_GPIO_PORT_P 15 +#define TEGRA_MAIN_GPIO_PORT_Q 16 +#define TEGRA_MAIN_GPIO_PORT_R 17 +#define TEGRA_MAIN_GPIO_PORT_T 18 +#define TEGRA_MAIN_GPIO_PORT_X 19 +#define TEGRA_MAIN_GPIO_PORT_Y 20 +#define TEGRA_MAIN_GPIO_PORT_BB 21 +#define TEGRA_MAIN_GPIO_PORT_CC 22 + +#define TEGRA_MAIN_GPIO(port, offset) \ + ((TEGRA_MAIN_GPIO_PORT_##port * 8) + offset) + +/* GPIOs implemented by AON GPIO controller */ +#define TEGRA_AON_GPIO_PORT_S 0 +#define TEGRA_AON_GPIO_PORT_U 1 +#define TEGRA_AON_GPIO_PORT_V 2 +#define TEGRA_AON_GPIO_PORT_W 3 +#define TEGRA_AON_GPIO_PORT_Z 4 +#define TEGRA_AON_GPIO_PORT_AA 5 +#define TEGRA_AON_GPIO_PORT_EE 6 +#define TEGRA_AON_GPIO_PORT_FF 7 + +#define TEGRA_AON_GPIO(port, offset) \ + ((TEGRA_AON_GPIO_PORT_##port * 8) + offset) + +#endif diff --git a/include/dt-bindings/pinctrl/hisi.h b/include/dt-bindings/pinctrl/hisi.h new file mode 100644 index 000000000000..38f1ea879ea1 --- /dev/null +++ b/include/dt-bindings/pinctrl/hisi.h @@ -0,0 +1,59 @@ +/* + * This header provides constants for hisilicon pinctrl bindings. + * + * Copyright (c) 2015 Hisilicon Limited. + * Copyright (c) 2015 Linaro Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_PINCTRL_HISI_H +#define _DT_BINDINGS_PINCTRL_HISI_H + +/* iomg bit definition */ +#define MUX_M0 0 +#define MUX_M1 1 +#define MUX_M2 2 +#define MUX_M3 3 +#define MUX_M4 4 +#define MUX_M5 5 +#define MUX_M6 6 +#define MUX_M7 7 + +/* iocg bit definition */ +#define PULL_MASK (3) +#define PULL_DIS (0) +#define PULL_UP (1 << 0) +#define PULL_DOWN (1 << 1) + +/* drive strength definition */ +#define DRIVE_MASK (7 << 4) +#define DRIVE1_02MA (0 << 4) +#define DRIVE1_04MA (1 << 4) +#define DRIVE1_08MA (2 << 4) +#define DRIVE1_10MA (3 << 4) +#define DRIVE2_02MA (0 << 4) +#define DRIVE2_04MA (1 << 4) +#define DRIVE2_08MA (2 << 4) +#define DRIVE2_10MA (3 << 4) +#define DRIVE3_04MA (0 << 4) +#define DRIVE3_08MA (1 << 4) +#define DRIVE3_12MA (2 << 4) +#define DRIVE3_16MA (3 << 4) +#define DRIVE3_20MA (4 << 4) +#define DRIVE3_24MA (5 << 4) +#define DRIVE3_32MA (6 << 4) +#define DRIVE3_40MA (7 << 4) +#define DRIVE4_02MA (0 << 4) +#define DRIVE4_04MA (2 << 4) +#define DRIVE4_08MA (4 << 4) +#define DRIVE4_10MA (6 << 4) + +#endif |