diff options
| -rw-r--r-- | arch/arm/mach-omap2/board-apollon.c | 13 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-h4.c | 7 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/devices.c | 25 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/i2c.c | 27 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/mcbsp.c | 13 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/usb-tusb6010.c | 14 |
6 files changed, 42 insertions, 57 deletions
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index bc67026088f6..8cea6235b4be 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -35,7 +35,6 @@ #include <mach/gpio.h> #include <plat/led.h> -#include <plat/mux.h> #include <plat/usb.h> #include <plat/board.h> #include <plat/common.h> @@ -246,7 +245,7 @@ static inline void __init apollon_init_smc91x(void) apollon_smc91x_resources[0].end = base + 0x30f; udelay(100); - omap_cfg_reg(W4__24XX_GPIO74); + omap_mux_init_gpio(74, 0); if (gpio_request(APOLLON_ETHR_GPIO_IRQ, "SMC91x irq") < 0) { printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", APOLLON_ETHR_GPIO_IRQ); @@ -288,15 +287,15 @@ static void __init omap_apollon_init_irq(void) static void __init apollon_led_init(void) { /* LED0 - AA10 */ - omap_cfg_reg(AA10_242X_GPIO13); + omap_mux_init_signal("vlynq_clk.gpio_13", 0); gpio_request(LED0_GPIO13, "LED0"); gpio_direction_output(LED0_GPIO13, 0); /* LED1 - AA6 */ - omap_cfg_reg(AA6_242X_GPIO14); + omap_mux_init_signal("vlynq_rx1.gpio_14", 0); gpio_request(LED1_GPIO14, "LED1"); gpio_direction_output(LED1_GPIO14, 0); /* LED2 - AA4 */ - omap_cfg_reg(AA4_242X_GPIO15); + omap_mux_init_signal("vlynq_rx0.gpio_15", 0); gpio_request(LED2_GPIO15, "LED2"); gpio_direction_output(LED2_GPIO15, 0); } @@ -305,7 +304,7 @@ static void __init apollon_usb_init(void) { /* USB device */ /* DEVICE_SUSPEND */ - omap_cfg_reg(P21_242X_GPIO12); + omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0); gpio_request(12, "USB suspend"); gpio_direction_output(12, 0); omap2_usbfs_init(&apollon_usb_config); @@ -330,7 +329,7 @@ static void __init omap_apollon_init(void) apollon_usb_init(); /* REVISIT: where's the correct place */ - omap_cfg_reg(W19_24XX_SYS_NIRQ); + omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP); /* LCD PWR_EN */ omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP); diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index cdcd4fbad153..2d9ff0fa2828 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -33,7 +33,6 @@ #include <plat/control.h> #include <mach/gpio.h> -#include <plat/mux.h> #include <plat/usb.h> #include <plat/board.h> #include <plat/common.h> @@ -248,7 +247,7 @@ static inline void __init h4_init_debug(void) udelay(100); - omap_cfg_reg(M15_24XX_GPIO92); + omap_mux_init_gpio(92, 0); if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0) gpmc_cs_free(eth_cs); @@ -358,8 +357,8 @@ static void __init omap_h4_init(void) * if not needed. */ #if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE) - omap_cfg_reg(K15_24XX_UART3_TX); - omap_cfg_reg(K14_24XX_UART3_RX); + omap_mux_init_signal("uart3_tx_irtx.uart3_tx_irtx", 0); + omap_mux_init_signal("uart3_rx_irrx.uart3_rx_irrx", 0); #endif #if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 03e6c9ed82a4..3ae9d0a477b6 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -25,7 +25,6 @@ #include <plat/control.h> #include <plat/tc.h> #include <plat/board.h> -#include <plat/mux.h> #include <mach/gpio.h> #include <plat/mmc.h> #include <plat/dma.h> @@ -672,19 +671,19 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, OMAP_PIN_INPUT_PULLUP); if (cpu_is_omap2420() && controller_nr == 0) { - omap_cfg_reg(H18_24XX_MMC_CMD); - omap_cfg_reg(H15_24XX_MMC_CLKI); - omap_cfg_reg(G19_24XX_MMC_CLKO); - omap_cfg_reg(F20_24XX_MMC_DAT0); - omap_cfg_reg(F19_24XX_MMC_DAT_DIR0); - omap_cfg_reg(G18_24XX_MMC_CMD_DIR); + omap_mux_init_signal("sdmmc_cmd", 0); + omap_mux_init_signal("sdmmc_clki", 0); + omap_mux_init_signal("sdmmc_clko", 0); + omap_mux_init_signal("sdmmc_dat0", 0); + omap_mux_init_signal("sdmmc_dat_dir0", 0); + omap_mux_init_signal("sdmmc_cmd_dir", 0); if (mmc_controller->slots[0].wires == 4) { - omap_cfg_reg(H14_24XX_MMC_DAT1); - omap_cfg_reg(E19_24XX_MMC_DAT2); - omap_cfg_reg(D19_24XX_MMC_DAT3); - omap_cfg_reg(E20_24XX_MMC_DAT_DIR1); - omap_cfg_reg(F18_24XX_MMC_DAT_DIR2); - omap_cfg_reg(E18_24XX_MMC_DAT_DIR3); + omap_mux_init_signal("sdmmc_dat1", 0); + omap_mux_init_signal("sdmmc_dat2", 0); + omap_mux_init_signal("sdmmc_dat3", 0); + omap_mux_init_signal("sdmmc_dat_dir1", 0); + omap_mux_init_signal("sdmmc_dat_dir2", 0); + omap_mux_init_signal("sdmmc_dat_dir3", 0); } /* diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index 7951ae1447ee..79c478c4cb1c 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -21,32 +21,19 @@ #include <plat/cpu.h> #include <plat/i2c.h> -#include <plat/mux.h> #include "mux.h" void __init omap2_i2c_mux_pins(int bus_id) { - if (cpu_is_omap24xx()) { - const int omap24xx_pins[][2] = { - { M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA }, - { J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA }, - }; - int scl, sda; - - scl = omap24xx_pins[bus_id - 1][0]; - sda = omap24xx_pins[bus_id - 1][1]; - omap_cfg_reg(sda); - omap_cfg_reg(scl); - } + char mux_name[sizeof("i2c2_scl.i2c2_scl")]; /* First I2C bus is not muxable */ - if (cpu_is_omap34xx() && bus_id > 1) { - char mux_name[sizeof("i2c2_scl.i2c2_scl")]; + if (bus_id == 1) + return; - sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id); - omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); - sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id); - omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); - } + sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id); + omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); + sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id); + omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); } diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index c29337074ad3..87aa4c9597cc 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -20,17 +20,18 @@ #include <mach/irqs.h> #include <plat/dma.h> -#include <plat/mux.h> #include <plat/cpu.h> #include <plat/mcbsp.h> +#include "mux.h" + static void omap2_mcbsp2_mux_setup(void) { - omap_cfg_reg(Y15_24XX_MCBSP2_CLKX); - omap_cfg_reg(R14_24XX_MCBSP2_FSX); - omap_cfg_reg(W15_24XX_MCBSP2_DR); - omap_cfg_reg(V15_24XX_MCBSP2_DX); - omap_cfg_reg(V14_24XX_GPIO117); + omap_mux_init_signal("eac_ac_sclk.mcbsp2_clkx", OMAP_PULL_ENA); + omap_mux_init_signal("eac_ac_fs.mcbsp2_fsx", OMAP_PULL_ENA); + omap_mux_init_signal("eac_ac_din.mcbsp2_dr", OMAP_PULL_ENA); + omap_mux_init_signal("eac_ac_dout.mcbsp2_dx", OMAP_PULL_ENA); + omap_mux_init_gpio(117, OMAP_PULL_ENA); /* * TODO: Need to add MUX settings for OMAP 2430 SDP */ diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 10a2013c1104..64a0112b70a5 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -17,8 +17,8 @@ #include <linux/usb/musb.h> #include <plat/gpmc.h> -#include <plat/mux.h> +#include "mux.h" static u8 async_cs, sync_cs; static unsigned refclk_psec; @@ -325,17 +325,17 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, else { /* assume OMAP 2420 ES2.0 and later */ if (dmachan & (1 << 0)) - omap_cfg_reg(AA10_242X_DMAREQ0); + omap_mux_init_signal("sys_ndmareq0", 0); if (dmachan & (1 << 1)) - omap_cfg_reg(AA6_242X_DMAREQ1); + omap_mux_init_signal("sys_ndmareq1", 0); if (dmachan & (1 << 2)) - omap_cfg_reg(E4_242X_DMAREQ2); + omap_mux_init_signal("sys_ndmareq2", 0); if (dmachan & (1 << 3)) - omap_cfg_reg(G4_242X_DMAREQ3); + omap_mux_init_signal("sys_ndmareq3", 0); if (dmachan & (1 << 4)) - omap_cfg_reg(D3_242X_DMAREQ4); + omap_mux_init_signal("sys_ndmareq4", 0); if (dmachan & (1 << 5)) - omap_cfg_reg(E3_242X_DMAREQ5); + omap_mux_init_signal("sys_ndmareq5", 0); } /* so far so good ... register the device */ |