diff options
-rw-r--r-- | drivers/spi/spi-dw-mid.c | 52 | ||||
-rw-r--r-- | drivers/spi/spi-dw.c | 40 | ||||
-rw-r--r-- | drivers/spi/spi-dw.h | 17 |
3 files changed, 43 insertions, 66 deletions
diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index e614190daef6..599dad40a3ec 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -69,6 +69,7 @@ static int mid_spi_dma_init(struct dw_spi *dws) rxs->hs_mode = LNW_DMA_HW_HS; rxs->cfg_mode = LNW_DMA_PER_TO_MEM; dws->rxchan->private = rxs; + dws->master->dma_rx = dws->rxchan; /* 2. Init tx channel */ dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws); @@ -78,6 +79,7 @@ static int mid_spi_dma_init(struct dw_spi *dws) txs->hs_mode = LNW_DMA_HW_HS; txs->cfg_mode = LNW_DMA_MEM_TO_PER; dws->txchan->private = txs; + dws->master->dma_tx = dws->txchan; dws->dma_inited = 1; return 0; @@ -116,6 +118,17 @@ static irqreturn_t dma_transfer(struct dw_spi *dws) return IRQ_HANDLED; } +static bool mid_spi_can_dma(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct dw_spi *dws = spi_master_get_devdata(master); + + if (!dws->dma_inited) + return false; + + return xfer->len > dws->fifo_len; +} + static enum dma_slave_buswidth convert_dma_width(u32 dma_width) { if (dma_width == 1) return DMA_SLAVE_BUSWIDTH_1_BYTE; @@ -139,12 +152,13 @@ static void dw_spi_dma_tx_done(void *arg) spi_finalize_current_transfer(dws->master); } -static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws) +static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws, + struct spi_transfer *xfer) { struct dma_slave_config txconf; struct dma_async_tx_descriptor *txdesc; - if (!dws->tx_dma) + if (!xfer->tx_buf) return NULL; txconf.direction = DMA_MEM_TO_DEV; @@ -156,13 +170,9 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws) dmaengine_slave_config(dws->txchan, &txconf); - memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl)); - dws->tx_sgl.dma_address = dws->tx_dma; - dws->tx_sgl.length = dws->len; - txdesc = dmaengine_prep_slave_sg(dws->txchan, - &dws->tx_sgl, - 1, + xfer->tx_sg.sgl, + xfer->tx_sg.nents, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!txdesc) @@ -188,12 +198,13 @@ static void dw_spi_dma_rx_done(void *arg) spi_finalize_current_transfer(dws->master); } -static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws) +static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws, + struct spi_transfer *xfer) { struct dma_slave_config rxconf; struct dma_async_tx_descriptor *rxdesc; - if (!dws->rx_dma) + if (!xfer->rx_buf) return NULL; rxconf.direction = DMA_DEV_TO_MEM; @@ -205,13 +216,9 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws) dmaengine_slave_config(dws->rxchan, &rxconf); - memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl)); - dws->rx_sgl.dma_address = dws->rx_dma; - dws->rx_sgl.length = dws->len; - rxdesc = dmaengine_prep_slave_sg(dws->rxchan, - &dws->rx_sgl, - 1, + xfer->rx_sg.sgl, + xfer->rx_sg.nents, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!rxdesc) @@ -223,16 +230,16 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws) return rxdesc; } -static int mid_spi_dma_setup(struct dw_spi *dws) +static int mid_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer) { u16 dma_ctrl = 0; dw_writew(dws, DW_SPI_DMARDLR, 0xf); dw_writew(dws, DW_SPI_DMATDLR, 0x10); - if (dws->tx_dma) + if (xfer->tx_buf) dma_ctrl |= SPI_DMA_TDMAE; - if (dws->rx_dma) + if (xfer->rx_buf) dma_ctrl |= SPI_DMA_RDMAE; dw_writew(dws, DW_SPI_DMACR, dma_ctrl); @@ -244,15 +251,15 @@ static int mid_spi_dma_setup(struct dw_spi *dws) return 0; } -static int mid_spi_dma_transfer(struct dw_spi *dws) +static int mid_spi_dma_transfer(struct dw_spi *dws, struct spi_transfer *xfer) { struct dma_async_tx_descriptor *txdesc, *rxdesc; /* Prepare the TX dma transfer */ - txdesc = dw_spi_dma_prepare_tx(dws); + txdesc = dw_spi_dma_prepare_tx(dws, xfer); /* Prepare the RX dma transfer */ - rxdesc = dw_spi_dma_prepare_rx(dws); + rxdesc = dw_spi_dma_prepare_rx(dws, xfer); /* rx must be started before tx due to spi instinct */ if (rxdesc) { @@ -286,6 +293,7 @@ static struct dw_spi_dma_ops mid_dma_ops = { .dma_init = mid_spi_dma_init, .dma_exit = mid_spi_dma_exit, .dma_setup = mid_spi_dma_setup, + .can_dma = mid_spi_can_dma, .dma_transfer = mid_spi_dma_transfer, .dma_stop = mid_spi_dma_stop, }; diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index d53cffe7ff22..2437bfcbf2f8 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -217,32 +217,6 @@ static void dw_reader(struct dw_spi *dws) } } -/* - * Note: first step is the protocol driver prepares - * a dma-capable memory, and this func just need translate - * the virt addr to physical - */ -static int map_dma_buffers(struct spi_master *master, - struct spi_device *spi, struct spi_transfer *transfer) -{ - struct dw_spi *dws = spi_master_get_devdata(master); - struct chip_data *chip = spi_get_ctldata(spi); - - if (!master->cur_msg->is_dma_mapped - || !dws->dma_inited - || !chip->enable_dma - || !dws->dma_ops) - return 0; - - if (transfer->tx_dma) - dws->tx_dma = transfer->tx_dma; - - if (transfer->rx_dma) - dws->rx_dma = transfer->rx_dma; - - return 1; -} - static void int_error_stop(struct dw_spi *dws, const char *msg) { spi_reset_chip(dws); @@ -322,11 +296,10 @@ static int dw_spi_transfer_one(struct spi_master *master, u32 cr0 = 0; int ret; + dws->dma_mapped = 0; dws->n_bytes = chip->n_bytes; dws->dma_width = chip->dma_width; - dws->rx_dma = transfer->rx_dma; - dws->tx_dma = transfer->tx_dma; dws->tx = (void *)transfer->tx_buf; dws->tx_end = dws->tx + transfer->len; dws->rx = transfer->rx_buf; @@ -386,7 +359,8 @@ static int dw_spi_transfer_one(struct spi_master *master, dw_writew(dws, DW_SPI_CTRL0, cr0); /* Check if current transfer is a DMA transaction */ - dws->dma_mapped = map_dma_buffers(master, spi, transfer); + if (master->can_dma && master->can_dma(master, spi, transfer)) + dws->dma_mapped = master->cur_msg_mapped; /* For poll mode just disable all interrupts */ spi_mask_intr(dws, 0xff); @@ -396,7 +370,7 @@ static int dw_spi_transfer_one(struct spi_master *master, * we only need set the TXEI IRQ, as TX/RX always happen syncronizely */ if (dws->dma_mapped) { - ret = dws->dma_ops->dma_setup(dws); + ret = dws->dma_ops->dma_setup(dws, transfer); if (ret < 0) { spi_enable_chip(dws, 1); return ret; @@ -416,7 +390,7 @@ static int dw_spi_transfer_one(struct spi_master *master, spi_enable_chip(dws, 1); if (dws->dma_mapped) { - ret = dws->dma_ops->dma_transfer(dws); + ret = dws->dma_ops->dma_transfer(dws, transfer); if (ret < 0) return ret; } @@ -470,8 +444,6 @@ static int dw_spi_setup(struct spi_device *spi) chip->rx_threshold = 0; chip->tx_threshold = 0; - - chip->enable_dma = chip_info->enable_dma; } if (spi->bits_per_word == 8) { @@ -584,6 +556,8 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) if (ret) { dev_warn(dev, "DMA init failed\n"); dws->dma_inited = 0; + } else { + master->can_dma = dws->dma_ops->can_dma; } } diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 7f130bd8f37a..f298df59381b 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -91,8 +91,10 @@ struct dw_spi; struct dw_spi_dma_ops { int (*dma_init)(struct dw_spi *dws); void (*dma_exit)(struct dw_spi *dws); - int (*dma_setup)(struct dw_spi *dws); - int (*dma_transfer)(struct dw_spi *dws); + int (*dma_setup)(struct dw_spi *dws, struct spi_transfer *xfer); + bool (*can_dma)(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *xfer); + int (*dma_transfer)(struct dw_spi *dws, struct spi_transfer *xfer); void (*dma_stop)(struct dw_spi *dws); }; @@ -117,20 +119,14 @@ struct dw_spi { void *rx; void *rx_end; int dma_mapped; - dma_addr_t rx_dma; - dma_addr_t tx_dma; - size_t rx_map_len; - size_t tx_map_len; u8 n_bytes; /* current is a 1/2 bytes op */ u32 dma_width; irqreturn_t (*transfer_handler)(struct dw_spi *dws); - /* Dma info */ + /* DMA info */ int dma_inited; struct dma_chan *txchan; - struct scatterlist tx_sgl; struct dma_chan *rxchan; - struct scatterlist rx_sgl; unsigned long dma_chan_busy; struct device *dma_dev; dma_addr_t dma_addr; /* phy address of the Data register */ @@ -206,14 +202,13 @@ static inline void spi_reset_chip(struct dw_spi *dws) /* * Each SPI slave device to work with dw_api controller should - * has such a structure claiming its working mode (PIO/DMA etc), + * has such a structure claiming its working mode (poll or PIO/DMA), * which can be save in the "controller_data" member of the * struct spi_device. */ struct dw_spi_chip { u8 poll_mode; /* 1 for controller polling mode */ u8 type; /* SPI/SSP/MicroWire */ - u8 enable_dma; void (*cs_control)(u32 command); }; |