diff options
| -rw-r--r-- | arch/arm/boot/dts/at91-sama5d2_xplained.dts | 24 | ||||
| -rw-r--r-- | arch/arm/boot/dts/sama5d2.dtsi | 56 |
2 files changed, 80 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 0bef9e0b89c6..37de94fc9b5a 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -258,6 +258,12 @@ status = "okay"; }; + can0: can@f8054000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; + status = "okay"; + }; + uart3: serial@fc008000 { atmel,use-dma-rx; atmel,use-dma-tx; @@ -322,6 +328,18 @@ bias-disable; }; + pinctrl_can0_default: can0_default { + pinmux = <PIN_PC10__CANTX0>, + <PIN_PC11__CANRX0>; + bias-disable; + }; + + pinctrl_can1_default: can1_default { + pinmux = <PIN_PC26__CANTX1>, + <PIN_PC27__CANRX1>; + bias-disable; + }; + pinctrl_charger_chglev: charger_chglev { pinmux = <PIN_PA12__GPIO>; bias-disable; @@ -469,6 +487,12 @@ }; }; + + can1: can@fc050000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 8067c71c3a38..ce95dcb8bdf9 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -762,6 +762,18 @@ atmel,clk-output-range = <0 83000000>; }; + can0_clk: can0_clk { + #clock-cells = <0>; + reg = <56>; + atmel,clk-output-range = <0 83000000>; + }; + + can1_clk: can1_clk { + #clock-cells = <0>; + reg = <57>; + atmel,clk-output-range = <0 83000000>; + }; + classd_clk: classd_clk { #clock-cells = <0>; reg = <59>; @@ -890,6 +902,18 @@ #clock-cells = <0>; reg = <55>; }; + + can0_gclk: can0_gclk { + #clock-cells = <0>; + reg = <56>; + atmel,clk-output-range = <0 80000000>; + }; + + can1_gclk: can1_gclk { + #clock-cells = <0>; + reg = <57>; + atmel,clk-output-range = <0 80000000>; + }; }; }; @@ -1144,6 +1168,22 @@ clocks = <&clk32k>; }; + can0: can@f8054000 { + compatible = "bosch,m_can"; + reg = <0xf8054000 0x4000>, <0x210000 0x4000>; + reg-names = "m_can", "message_ram"; + interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>, + <64 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-names = "int0", "int1"; + clocks = <&can0_clk>, <&can0_gclk>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&can0_gclk>; + assigned-clock-parents = <&utmi>; + assigned-clock-rates = <40000000>; + bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>; + status = "disabled"; + }; + spi1: spi@fc000000 { compatible = "atmel,at91rm9200-spi"; reg = <0xfc000000 0x100>; @@ -1305,6 +1345,22 @@ status = "okay"; }; + can1: can@fc050000 { + compatible = "bosch,m_can"; + reg = <0xfc050000 0x4000>, <0x210000 0x4000>; + reg-names = "m_can", "message_ram"; + interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>, + <65 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-names = "int0", "int1"; + clocks = <&can1_clk>, <&can1_gclk>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&can1_gclk>; + assigned-clock-parents = <&utmi>; + assigned-clock-rates = <40000000>; + bosch,mram-cfg = <0x1100 0 0 64 0 0 32 32>; + status = "disabled"; + }; + sfrbu: sfr@fc05c000 { compatible = "atmel,sama5d2-sfrbu", "syscon"; reg = <0xfc05c000 0x20>; |