diff options
| -rw-r--r-- | drivers/tty/serial/sirfsoc_uart.c | 28 | ||||
| -rw-r--r-- | drivers/tty/serial/sirfsoc_uart.h | 1 |
2 files changed, 22 insertions, 7 deletions
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index 8f3d6c091acc..6bbfe9934a4d 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -357,7 +357,6 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, struct ktermios *old) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); - unsigned long ioclk_rate; unsigned long config_reg = 0; unsigned long baud_rate; unsigned long setted_baud; @@ -369,7 +368,6 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, int threshold_div; int temp; - ioclk_rate = 150000000; switch (termios->c_cflag & CSIZE) { default: case CS8: @@ -425,14 +423,17 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, sirfsoc_uart_disable_ms(port); } - /* common rate: fast calculation */ - for (ic = 0; ic < SIRF_BAUD_RATE_SUPPORT_NR; ic++) - if (baud_rate == baudrate_to_regv[ic].baud_rate) - clk_div_reg = baudrate_to_regv[ic].reg_val; + if (port->uartclk == 150000000) { + /* common rate: fast calculation */ + for (ic = 0; ic < SIRF_BAUD_RATE_SUPPORT_NR; ic++) + if (baud_rate == baudrate_to_regv[ic].baud_rate) + clk_div_reg = baudrate_to_regv[ic].reg_val; + } + setted_baud = baud_rate; /* arbitary rate setting */ if (unlikely(clk_div_reg == 0)) - clk_div_reg = sirfsoc_calc_sample_div(baud_rate, ioclk_rate, + clk_div_reg = sirfsoc_calc_sample_div(baud_rate, port->uartclk, &setted_baud); wr_regl(port, SIRFUART_DIVISOR, clk_div_reg); @@ -691,6 +692,14 @@ int sirfsoc_uart_probe(struct platform_device *pdev) goto err; } + sirfport->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(sirfport->clk)) { + ret = PTR_ERR(sirfport->clk); + goto clk_err; + } + clk_prepare_enable(sirfport->clk); + port->uartclk = clk_get_rate(sirfport->clk); + port->ops = &sirfsoc_uart_ops; spin_lock_init(&port->lock); @@ -704,6 +713,9 @@ int sirfsoc_uart_probe(struct platform_device *pdev) return 0; port_err: + clk_disable_unprepare(sirfport->clk); + clk_put(sirfport->clk); +clk_err: platform_set_drvdata(pdev, NULL); if (sirfport->hw_flow_ctrl) pinctrl_put(sirfport->p); @@ -718,6 +730,8 @@ static int sirfsoc_uart_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); if (sirfport->hw_flow_ctrl) pinctrl_put(sirfport->p); + clk_disable_unprepare(sirfport->clk); + clk_put(sirfport->clk); uart_remove_one_port(&sirfsoc_uart_drv, port); return 0; } diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h index 6431640c3163..85328ba0c4e3 100644 --- a/drivers/tty/serial/sirfsoc_uart.h +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -163,6 +163,7 @@ struct sirfsoc_uart_port { struct uart_port port; struct pinctrl *p; + struct clk *clk; }; /* Hardware Flow Control */ |