diff options
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/trivial-devices.txt | 1 | ||||
| -rw-r--r-- | drivers/iio/accel/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/iio/accel/Makefile | 1 | ||||
| -rw-r--r-- | drivers/iio/accel/dmard09.c | 157 |
4 files changed, 169 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index acc5cd64711c..0bc11e041cfd 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -38,6 +38,7 @@ dallas,ds4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O dallas,ds75 Digital Thermometer and Thermostat dlg,da9053 DA9053: flexible system level PMIC with multicore support dlg,da9063 DA9063: system PMIC for quad-core application processors +domintech,dmard09 DMARD09: 3-axis Accelerometer epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE epson,rx8025 High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index ee57effee549..5630f2316c58 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -61,6 +61,16 @@ config DMARD06 To compile this driver as a module, choose M here: the module will be called dmard06. +config DMARD09 + tristate "Domintech DMARD09 3-axis Accelerometer Driver" + depends on I2C + help + Say yes here to get support for the Domintech DMARD09 3-axis + accelerometer. + + Choosing M will build the driver as a module. If so, the module + will be called dmard09. + config HID_SENSOR_ACCEL_3D depends on HID_SENSOR_HUB select IIO_BUFFER diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 24eba651ee78..e974841ec9cf 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o obj-$(CONFIG_DMARD06) += dmard06.o +obj-$(CONFIG_DMARD09) += dmard09.o obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o obj-$(CONFIG_KXSD9) += kxsd9.o diff --git a/drivers/iio/accel/dmard09.c b/drivers/iio/accel/dmard09.c new file mode 100644 index 000000000000..d3a28f96565c --- /dev/null +++ b/drivers/iio/accel/dmard09.c @@ -0,0 +1,157 @@ +/* + * IIO driver for the 3-axis accelerometer Domintech DMARD09. + * + * Copyright (c) 2016, Jelle van der Waa <jelle@vdwaa.nl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <asm/unaligned.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> + +#define DMARD09_DRV_NAME "dmard09" + +#define DMARD09_REG_CHIPID 0x18 +#define DMARD09_REG_STAT 0x0A +#define DMARD09_REG_X 0x0C +#define DMARD09_REG_Y 0x0E +#define DMARD09_REG_Z 0x10 +#define DMARD09_CHIPID 0x95 + +#define DMARD09_BUF_LEN 8 +#define DMARD09_AXIS_X 0 +#define DMARD09_AXIS_Y 1 +#define DMARD09_AXIS_Z 2 +#define DMARD09_AXIS_X_OFFSET ((DMARD09_AXIS_X + 1) * 2) +#define DMARD09_AXIS_Y_OFFSET ((DMARD09_AXIS_Y + 1 )* 2) +#define DMARD09_AXIS_Z_OFFSET ((DMARD09_AXIS_Z + 1) * 2) + +struct dmard09_data { + struct i2c_client *client; +}; + +#define DMARD09_CHANNEL(_axis, offset) { \ + .type = IIO_ACCEL, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .modified = 1, \ + .address = offset, \ + .channel2 = IIO_MOD_##_axis, \ +} + +static const struct iio_chan_spec dmard09_channels[] = { + DMARD09_CHANNEL(X, DMARD09_AXIS_X_OFFSET), + DMARD09_CHANNEL(Y, DMARD09_AXIS_Y_OFFSET), + DMARD09_CHANNEL(Z, DMARD09_AXIS_Z_OFFSET), +}; + +static int dmard09_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct dmard09_data *data = iio_priv(indio_dev); + u8 buf[DMARD09_BUF_LEN]; + int ret; + s16 accel; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + /* + * Read from the DMAR09_REG_STAT register, since the chip + * caches reads from the individual X, Y, Z registers. + */ + ret = i2c_smbus_read_i2c_block_data(data->client, + DMARD09_REG_STAT, + DMARD09_BUF_LEN, buf); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg %d\n", + DMARD09_REG_STAT); + return ret; + } + + accel = get_unaligned_le16(&buf[chan->address]); + + /* Remove lower 3 bits and sign extend */ + accel <<= 4; + accel >>= 7; + + *val = accel; + + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static const struct iio_info dmard09_info = { + .driver_module = THIS_MODULE, + .read_raw = dmard09_read_raw, +}; + +static int dmard09_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct iio_dev *indio_dev; + struct dmard09_data *data; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) { + dev_err(&client->dev, "iio allocation failed\n"); + return -ENOMEM; + } + + data = iio_priv(indio_dev); + data->client = client; + + ret = i2c_smbus_read_byte_data(data->client, DMARD09_REG_CHIPID); + if (ret < 0) { + dev_err(&client->dev, "Error reading chip id %d\n", ret); + return ret; + } + + if (ret != DMARD09_CHIPID) { + dev_err(&client->dev, "Invalid chip id %d\n", ret); + return -ENODEV; + } + + i2c_set_clientdata(client, indio_dev); + indio_dev->dev.parent = &client->dev; + indio_dev->name = DMARD09_DRV_NAME; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = dmard09_channels; + indio_dev->num_channels = ARRAY_SIZE(dmard09_channels); + indio_dev->info = &dmard09_info; + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id dmard09_id[] = { + { "dmard09", 0}, + { }, +}; + +MODULE_DEVICE_TABLE(i2c, dmard09_id); + +static struct i2c_driver dmard09_driver = { + .driver = { + .name = DMARD09_DRV_NAME + }, + .probe = dmard09_probe, + .id_table = dmard09_id, +}; + +module_i2c_driver(dmard09_driver); + +MODULE_AUTHOR("Jelle van der Waa <jelle@vdwaa.nl>"); +MODULE_DESCRIPTION("DMARD09 3-axis accelerometer driver"); +MODULE_LICENSE("GPL"); |