diff options
| -rw-r--r-- | Documentation/devicetree/bindings/power/rockchip-io-domain.txt | 135 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/power/rockchip-io-domain.yaml | 360 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 19 | ||||
| -rw-r--r-- | drivers/soc/rockchip/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/soc/rockchip/io-domain.c | 88 |
5 files changed, 455 insertions, 151 deletions
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt deleted file mode 100644 index e66fd4eab71c..000000000000 --- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt +++ /dev/null @@ -1,135 +0,0 @@ -Rockchip SRAM for IO Voltage Domains: -------------------------------------- - -IO domain voltages on some Rockchip SoCs are variable but need to be -kept in sync between the regulators and the SoC using a special -register. - -A specific example using rk3288: -- If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then - bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to - that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1. - -Said another way, this driver simply handles keeping bits in the SoC's -general register file (GRF) in sync with the actual value of a voltage -hooked up to the pins. - -Note that this driver specifically doesn't include: -- any logic for deciding what voltage we should set regulators to -- any logic for deciding whether regulators (or internal SoC blocks) - should have power or not have power - -If there were some other software that had the smarts of making -decisions about regulators, it would work in conjunction with this -driver. When that other software adjusted a regulator's voltage then -this driver would handle telling the SoC about it. A good example is -vqmmc for SD. In that case the dw_mmc driver simply is told about a -regulator. It changes the regulator between 3.3V and 1.8V at the -right time. This driver notices the change and makes sure that the -SoC is on the same page. - - -Required properties: -- compatible: should be one of: - - "rockchip,px30-io-voltage-domain" for px30 - - "rockchip,px30-pmu-io-voltage-domain" for px30 pmu-domains - - "rockchip,rk3188-io-voltage-domain" for rk3188 - - "rockchip,rk3228-io-voltage-domain" for rk3228 - - "rockchip,rk3288-io-voltage-domain" for rk3288 - - "rockchip,rk3328-io-voltage-domain" for rk3328 - - "rockchip,rk3368-io-voltage-domain" for rk3368 - - "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains - - "rockchip,rk3399-io-voltage-domain" for rk3399 - - "rockchip,rk3399-pmu-io-voltage-domain" for rk3399 pmu-domains - - "rockchip,rv1108-io-voltage-domain" for rv1108 - - "rockchip,rv1108-pmu-io-voltage-domain" for rv1108 pmu-domains - -Deprecated properties: -- rockchip,grf: phandle to the syscon managing the "general register files" - Systems should move the io-domains to a sub-node of the grf simple-mfd. - -You specify supplies using the standard regulator bindings by including -a phandle the relevant regulator. All specified supplies must be able -to report their voltage. The IO Voltage Domain for any non-specified -supplies will be not be touched. - -Possible supplies for PX30: -- vccio6-supply: The supply connected to VCCIO6. -- vccio1-supply: The supply connected to VCCIO1. -- vccio2-supply: The supply connected to VCCIO2. -- vccio3-supply: The supply connected to VCCIO3. -- vccio4-supply: The supply connected to VCCIO4. -- vccio5-supply: The supply connected to VCCIO5. -- vccio-oscgpi-supply: The supply connected to VCCIO_OSCGPI. - -Possible supplies for PX30 pmu-domains: -- pmuio1-supply: The supply connected to PMUIO1. -- pmuio2-supply: The supply connected to PMUIO2. - -Possible supplies for rk3188: -- ap0-supply: The supply connected to AP0_VCC. -- ap1-supply: The supply connected to AP1_VCC. -- cif-supply: The supply connected to CIF_VCC. -- flash-supply: The supply connected to FLASH_VCC. -- lcdc0-supply: The supply connected to LCD0_VCC. -- lcdc1-supply: The supply connected to LCD1_VCC. -- vccio0-supply: The supply connected to VCCIO0. -- vccio1-supply: The supply connected to VCCIO1. - Sometimes also labeled VCCIO1 and VCCIO2. - -Possible supplies for rk3228: -- vccio1-supply: The supply connected to VCCIO1. -- vccio2-supply: The supply connected to VCCIO2. -- vccio3-supply: The supply connected to VCCIO3. -- vccio4-supply: The supply connected to VCCIO4. - -Possible supplies for rk3288: -- audio-supply: The supply connected to APIO4_VDD. -- bb-supply: The supply connected to APIO5_VDD. -- dvp-supply: The supply connected to DVPIO_VDD. -- flash0-supply: The supply connected to FLASH0_VDD. Typically for eMMC -- flash1-supply: The supply connected to FLASH1_VDD. Also known as SDIO1. -- gpio30-supply: The supply connected to APIO1_VDD. -- gpio1830 The supply connected to APIO2_VDD. -- lcdc-supply: The supply connected to LCDC_VDD. -- sdcard-supply: The supply connected to SDMMC0_VDD. -- wifi-supply: The supply connected to APIO3_VDD. Also known as SDIO0. - -Possible supplies for rk3368: -- audio-supply: The supply connected to APIO3_VDD. -- dvp-supply: The supply connected to DVPIO_VDD. -- flash0-supply: The supply connected to FLASH0_VDD. Typically for eMMC -- gpio30-supply: The supply connected to APIO1_VDD. -- gpio1830 The supply connected to APIO4_VDD. -- sdcard-supply: The supply connected to SDMMC0_VDD. -- wifi-supply: The supply connected to APIO2_VDD. Also known as SDIO0. - -Possible supplies for rk3368 pmu-domains: -- pmu-supply: The supply connected to PMUIO_VDD. -- vop-supply: The supply connected to LCDC_VDD. - -Possible supplies for rk3399: -- bt656-supply: The supply connected to APIO2_VDD. -- audio-supply: The supply connected to APIO5_VDD. -- sdmmc-supply: The supply connected to SDMMC0_VDD. -- gpio1830 The supply connected to APIO4_VDD. - -Possible supplies for rk3399 pmu-domains: -- pmu1830-supply:The supply connected to PMUIO2_VDD. - -Example: - - io-domains { - compatible = "rockchip,rk3288-io-voltage-domain"; - rockchip,grf = <&grf>; - - audio-supply = <&vcc18_codec>; - bb-supply = <&vcc33_io>; - dvp-supply = <&vcc_18>; - flash0-supply = <&vcc18_flashio>; - gpio1830-supply = <&vcc33_io>; - gpio30-supply = <&vcc33_pmuio>; - lcdc-supply = <&vcc33_lcd>; - sdcard-supply = <&vccio_sd>; - wifi-supply = <&vcc18_wl>; - }; diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml new file mode 100644 index 000000000000..1727bf108979 --- /dev/null +++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml @@ -0,0 +1,360 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/rockchip-io-domain.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SRAM for IO Voltage Domains + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +description: | + IO domain voltages on some Rockchip SoCs are variable but need to be + kept in sync between the regulators and the SoC using a special + register. + + A specific example using rk3288 + If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then + bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to + that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1. + + Said another way, this driver simply handles keeping bits in the SoCs + General Register File (GRF) in sync with the actual value of a voltage + hooked up to the pins. + + Note that this driver specifically does not include + any logic for deciding what voltage we should set regulators to + any logic for deciding whether regulators (or internal SoC blocks) + should have power or not have power + + If there were some other software that had the smarts of making + decisions about regulators, it would work in conjunction with this + driver. When that other software adjusted a regulators voltage then + this driver would handle telling the SoC about it. A good example is + vqmmc for SD. In that case the dw_mmc driver simply is told about a + regulator. It changes the regulator between 3.3V and 1.8V at the + right time. This driver notices the change and makes sure that the + SoC is on the same page. + + You specify supplies using the standard regulator bindings by including + a phandle the relevant regulator. All specified supplies must be able + to report their voltage. The IO Voltage Domain for any non-specified + supplies will be not be touched. + +properties: + compatible: + enum: + - rockchip,px30-io-voltage-domain + - rockchip,px30-pmu-io-voltage-domain + - rockchip,rk3188-io-voltage-domain + - rockchip,rk3228-io-voltage-domain + - rockchip,rk3288-io-voltage-domain + - rockchip,rk3328-io-voltage-domain + - rockchip,rk3368-io-voltage-domain + - rockchip,rk3368-pmu-io-voltage-domain + - rockchip,rk3399-io-voltage-domain + - rockchip,rk3399-pmu-io-voltage-domain + - rockchip,rk3568-pmu-io-voltage-domain + - rockchip,rv1108-io-voltage-domain + - rockchip,rv1108-pmu-io-voltage-domain + +required: + - compatible + +unevaluatedProperties: false + +allOf: + - $ref: "#/$defs/px30" + - $ref: "#/$defs/px30-pmu" + - $ref: "#/$defs/rk3188" + - $ref: "#/$defs/rk3228" + - $ref: "#/$defs/rk3288" + - $ref: "#/$defs/rk3328" + - $ref: "#/$defs/rk3368" + - $ref: "#/$defs/rk3368-pmu" + - $ref: "#/$defs/rk3399" + - $ref: "#/$defs/rk3399-pmu" + - $ref: "#/$defs/rk3568-pmu" + - $ref: "#/$defs/rv1108" + - $ref: "#/$defs/rv1108-pmu" + +$defs: + px30: + if: + properties: + compatible: + contains: + const: rockchip,px30-io-voltage-domain + + then: + properties: + vccio1-supply: + description: The supply connected to VCCIO1. + vccio2-supply: + description: The supply connected to VCCIO2. + vccio3-supply: + description: The supply connected to VCCIO3. + vccio4-supply: + description: The supply connected to VCCIO4. + vccio5-supply: + description: The supply connected to VCCIO5. + vccio6-supply: + description: The supply connected to VCCIO6. + vccio-oscgpi-supply: + description: The supply connected to VCCIO_OSCGPI. + + px30-pmu: + if: + properties: + compatible: + contains: + const: rockchip,px30-pmu-io-voltage-domain + + then: + properties: + pmuio1-supply: + description: The supply connected to PMUIO1. + pmuio2-supply: + description: The supply connected to PMUIO2. + + rk3188: + if: + properties: + compatible: + contains: + const: rockchip,rk3188-io-voltage-domain + + then: + properties: + ap0-supply: + description: The supply connected to AP0_VCC. + ap1-supply: + description: The supply connected to AP1_VCC. + cif-supply: + description: The supply connected to CIF_VCC. + flash-supply: + description: The supply connected to FLASH_VCC. + lcdc0-supply: + description: The supply connected to LCD0_VCC. + lcdc1-supply: + description: The supply connected to LCD1_VCC. + vccio0-supply: + description: The supply connected to VCCIO0. + vccio1-supply: + description: The supply connected to VCCIO1. Also labeled as VCCIO2. + + rk3228: + if: + properties: + compatible: + contains: + const: rockchip,rk3228-io-voltage-domain + + then: + properties: + vccio1-supply: + description: The supply connected to VCCIO1. + vccio2-supply: + description: The supply connected to VCCIO2. + vccio3-supply: + description: The supply connected to VCCIO3. + vccio4-supply: + description: The supply connected to VCCIO4. + + rk3288: + if: + properties: + compatible: + contains: + const: rockchip,rk3288-io-voltage-domain + + then: + properties: + audio-supply: + description: The supply connected to APIO4_VDD. + bb-supply: + description: The supply connected to APIO5_VDD. + dvp-supply: + description: The supply connected to DVPIO_VDD. + flash0-supply: + description: The supply connected to FLASH0_VDD. Typically for eMMC. + flash1-supply: + description: The supply connected to FLASH1_VDD. Also known as SDIO1. + gpio30-supply: + description: The supply connected to APIO1_VDD. + gpio1830-supply: + description: The supply connected to APIO2_VDD. + lcdc-supply: + description: The supply connected to LCDC_VDD. + sdcard-supply: + description: The supply connected to SDMMC0_VDD. + wifi-supply: + description: The supply connected to APIO3_VDD. Also known as SDIO0. + + rk3328: + if: + properties: + compatible: + contains: + const: rockchip,rk3328-io-voltage-domain + + then: + properties: + vccio1-supply: + description: The supply connected to VCCIO1. + vccio2-supply: + description: The supply connected to VCCIO2. + vccio3-supply: + description: The supply connected to VCCIO3. + vccio4-supply: + description: The supply connected to VCCIO4. + vccio5-supply: + description: The supply connected to VCCIO5. + vccio6-supply: + description: The supply connected to VCCIO6. + pmuio-supply: + description: The supply connected to VCCIO_PMU. + + rk3368: + if: + properties: + compatible: + contains: + const: rockchip,rk3368-io-voltage-domain + + then: + properties: + audio-supply: + description: The supply connected to APIO3_VDD. + dvp-supply: + description: The supply connected to DVPIO_VDD. + flash0-supply: + description: The supply connected to FLASH0_VDD. Typically for eMMC. + gpio30-supply: + description: The supply connected to APIO1_VDD. + gpio1830-supply: + description: The supply connected to APIO4_VDD. + sdcard-supply: + description: The supply connected to SDMMC0_VDD. + wifi-supply: + description: The supply connected to APIO2_VDD. Also known as SDIO0. + + rk3368-pmu: + if: + properties: + compatible: + contains: + const: rockchip,rk3368-pmu-io-voltage-domain + + then: + properties: + pmu-supply: + description: The supply connected to PMUIO_VDD. + vop-supply: + description: The supply connected to LCDC_VDD. + + rk3399: + if: + properties: + compatible: + contains: + const: rockchip,rk3399-io-voltage-domain + + then: + properties: + audio-supply: + description: The supply connected to APIO5_VDD. + bt656-supply: + description: The supply connected to APIO2_VDD. + gpio1830-supply: + description: The supply connected to APIO4_VDD. + sdmmc-supply: + description: The supply connected to SDMMC0_VDD. + + rk3399-pmu: + if: + properties: + compatible: + contains: + const: rockchip,rk3399-pmu-io-voltage-domain + + then: + properties: + pmu1830-supply: + description: The supply connected to PMUIO2_VDD. + + rk3568-pmu: + if: + properties: + compatible: + contains: + const: rockchip,rk3568-pmu-io-voltage-domain + + then: + properties: + pmuio1-supply: + description: The supply connected to PMUIO1. + pmuio2-supply: + description: The supply connected to PMUIO2. + vccio1-supply: + description: The supply connected to VCCIO1. + vccio2-supply: + description: The supply connected to VCCIO2. + vccio3-supply: + description: The supply connected to VCCIO3. + vccio4-supply: + description: The supply connected to VCCIO4. + vccio5-supply: + description: The supply connected to VCCIO5. + vccio6-supply: + description: The supply connected to VCCIO6. + vccio7-supply: + description: The supply connected to VCCIO7. + + rv1108: + if: + properties: + compatible: + contains: + const: rockchip,rv1108-io-voltage-domain + + then: + properties: + vccio1-supply: + description: The supply connected to APIO1_VDD. + vccio2-supply: + description: The supply connected to APIO2_VDD. + vccio3-supply: + description: The supply connected to APIO3_VDD. + vccio5-supply: + description: The supply connected to APIO5_VDD. + vccio6-supply: + description: The supply connected to APIO6_VDD. + + rv1108-pmu: + if: + properties: + compatible: + contains: + const: rockchip,rv1108-pmu-io-voltage-domain + + then: + properties: + pmu-supply: + description: The supply connected to PMUIO_VDD. + +examples: + - | + io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + audio-supply = <&vcc18_codec>; + bb-supply = <&vcc33_io>; + dvp-supply = <&vcc_18>; + flash0-supply = <&vcc18_flashio>; + gpio1830-supply = <&vcc33_io>; + gpio30-supply = <&vcc33_pmuio>; + lcdc-supply = <&vcc33_lcd>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc18_wl>; + }; diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index 62fa72cfea34..dfebf425ca49 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -15,7 +15,6 @@ properties: - items: - enum: - rockchip,rk3288-sgrf - - rockchip,rv1108-pmugrf - rockchip,rv1108-usbgrf - const: syscon - items: @@ -41,6 +40,7 @@ properties: - rockchip,rk3568-grf - rockchip,rk3568-pmugrf - rockchip,rv1108-grf + - rockchip,rv1108-pmugrf - const: syscon - const: simple-mfd @@ -198,21 +198,28 @@ allOf: compatible: contains: enum: - - rockchip,px30-pmugrf - rockchip,px30-grf + - rockchip,px30-pmugrf + - rockchip,rk3188-grf - rockchip,rk3228-grf - rockchip,rk3288-grf - rockchip,rk3328-grf - - rockchip,rk3368-pmugrf - rockchip,rk3368-grf - - rockchip,rk3399-pmugrf + - rockchip,rk3368-pmugrf - rockchip,rk3399-grf + - rockchip,rk3399-pmugrf + - rockchip,rk3568-pmugrf + - rockchip,rv1108-grf + - rockchip,rv1108-pmugrf then: properties: io-domains: - description: - Documentation/devicetree/bindings/power/rockchip-io-domain.txt + type: object + + $ref: "/schemas/power/rockchip-io-domain.yaml#" + + unevaluatedProperties: false examples: - | diff --git a/drivers/soc/rockchip/Kconfig b/drivers/soc/rockchip/Kconfig index 2c13bf4dd5db..25eb2c1e31bb 100644 --- a/drivers/soc/rockchip/Kconfig +++ b/drivers/soc/rockchip/Kconfig @@ -6,8 +6,8 @@ if ARCH_ROCKCHIP || COMPILE_TEST # config ROCKCHIP_GRF - bool - default y + bool "Rockchip General Register Files support" if COMPILE_TEST + default y if ARCH_ROCKCHIP help The General Register Files are a central component providing special additional settings registers for a lot of soc-components. diff --git a/drivers/soc/rockchip/io-domain.c b/drivers/soc/rockchip/io-domain.c index cf8182fc3642..9df513d1219b 100644 --- a/drivers/soc/rockchip/io-domain.c +++ b/drivers/soc/rockchip/io-domain.c @@ -51,13 +51,11 @@ #define RK3399_PMUGRF_CON0_VSEL BIT(8) #define RK3399_PMUGRF_VSEL_SUPPLY_NUM 9 -struct rockchip_iodomain; +#define RK3568_PMU_GRF_IO_VSEL0 (0x0140) +#define RK3568_PMU_GRF_IO_VSEL1 (0x0144) +#define RK3568_PMU_GRF_IO_VSEL2 (0x0148) -struct rockchip_iodomain_soc_data { - int grf_offset; - const char *supply_names[MAX_SUPPLIES]; - void (*init)(struct rockchip_iodomain *iod); -}; +struct rockchip_iodomain; struct rockchip_iodomain_supply { struct rockchip_iodomain *iod; @@ -66,13 +64,62 @@ struct rockchip_iodomain_supply { int idx; }; +struct rockchip_iodomain_soc_data { + int grf_offset; + const char *supply_names[MAX_SUPPLIES]; + void (*init)(struct rockchip_iodomain *iod); + int (*write)(struct rockchip_iodomain_supply *supply, int uV); +}; + struct rockchip_iodomain { struct device *dev; struct regmap *grf; const struct rockchip_iodomain_soc_data *soc_data; struct rockchip_iodomain_supply supplies[MAX_SUPPLIES]; + int (*write)(struct rockchip_iodomain_supply *supply, int uV); }; +static int rk3568_iodomain_write(struct rockchip_iodomain_supply *supply, int uV) +{ + struct rockchip_iodomain *iod = supply->iod; + u32 is_3v3 = uV > MAX_VOLTAGE_1_8; + u32 val0, val1; + int b; + + switch (supply->idx) { + case 0: /* pmuio1 */ + break; + case 1: /* pmuio2 */ + b = supply->idx; + val0 = BIT(16 + b) | (is_3v3 ? 0 : BIT(b)); + b = supply->idx + 4; + val1 = BIT(16 + b) | (is_3v3 ? BIT(b) : 0); + + regmap_write(iod->grf, RK3568_PMU_GRF_IO_VSEL2, val0); + regmap_write(iod->grf, RK3568_PMU_GRF_IO_VSEL2, val1); + break; + case 3: /* vccio2 */ + break; + case 2: /* vccio1 */ + case 4: /* vccio3 */ + case 5: /* vccio4 */ + case 6: /* vccio5 */ + case 7: /* vccio6 */ + case 8: /* vccio7 */ + b = supply->idx - 1; + val0 = BIT(16 + b) | (is_3v3 ? 0 : BIT(b)); + val1 = BIT(16 + b) | (is_3v3 ? BIT(b) : 0); + + regmap_write(iod->grf, RK3568_PMU_GRF_IO_VSEL0, val0); + regmap_write(iod->grf, RK3568_PMU_GRF_IO_VSEL1, val1); + break; + default: + return -EINVAL; + } + + return 0; +} + static int rockchip_iodomain_write(struct rockchip_iodomain_supply *supply, int uV) { @@ -136,7 +183,7 @@ static int rockchip_iodomain_notify(struct notifier_block *nb, return NOTIFY_BAD; } - ret = rockchip_iodomain_write(supply, uV); + ret = supply->iod->write(supply, uV); if (ret && event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE) return NOTIFY_BAD; @@ -398,6 +445,22 @@ static const struct rockchip_iodomain_soc_data soc_data_rk3399_pmu = { .init = rk3399_pmu_iodomain_init, }; +static const struct rockchip_iodomain_soc_data soc_data_rk3568_pmu = { + .grf_offset = 0x140, + .supply_names = { + "pmuio1", + "pmuio2", + "vccio1", + "vccio2", + "vccio3", + "vccio4", + "vccio5", + "vccio6", + "vccio7", + }, + .write = rk3568_iodomain_write, +}; + static const struct rockchip_iodomain_soc_data soc_data_rv1108 = { .grf_offset = 0x404, .supply_names = { @@ -470,6 +533,10 @@ static const struct of_device_id rockchip_iodomain_match[] = { .data = &soc_data_rk3399_pmu }, { + .compatible = "rockchip,rk3568-pmu-io-voltage-domain", + .data = &soc_data_rk3568_pmu + }, + { .compatible = "rockchip,rv1108-io-voltage-domain", .data = &soc_data_rv1108 }, @@ -502,6 +569,11 @@ static int rockchip_iodomain_probe(struct platform_device *pdev) match = of_match_node(rockchip_iodomain_match, np); iod->soc_data = match->data; + if (iod->soc_data->write) + iod->write = iod->soc_data->write; + else + iod->write = rockchip_iodomain_write; + parent = pdev->dev.parent; if (parent && parent->of_node) { iod->grf = syscon_node_to_regmap(parent->of_node); @@ -562,7 +634,7 @@ static int rockchip_iodomain_probe(struct platform_device *pdev) supply->reg = reg; supply->nb.notifier_call = rockchip_iodomain_notify; - ret = rockchip_iodomain_write(supply, uV); + ret = iod->write(supply, uV); if (ret) { supply->reg = NULL; goto unreg_notify; |