diff options
| -rw-r--r-- | Documentation/devicetree/bindings/arm/samsung/exynos-chipid.txt | 12 | ||||
| -rw-r--r-- | arch/arm/boot/dts/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/boot/dts/exynos3250-monk.dts | 15 | ||||
| -rw-r--r-- | arch/arm/boot/dts/exynos3250-rinato.dts | 85 | ||||
| -rw-r--r-- | arch/arm/boot/dts/exynos3250.dtsi | 21 | ||||
| -rw-r--r-- | arch/arm/boot/dts/exynos5250-snow.dts | 16 | ||||
| -rw-r--r-- | arch/arm/boot/dts/exynos5420-peach-pit.dts | 100 | ||||
| -rw-r--r-- | arch/arm/boot/dts/exynos5422-odroidxu3.dts | 332 | ||||
| -rw-r--r-- | arch/arm/boot/dts/exynos5800-peach-pi.dts | 101 |
9 files changed, 675 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.txt new file mode 100644 index 000000000000..85c5dfd4a720 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.txt @@ -0,0 +1,12 @@ +SAMSUNG Exynos SoCs Chipid driver. + +Required properties: +- compatible : Should at least contain "samsung,exynos4210-chipid". + +- reg: offset and length of the register set + +Example: + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 081e20ea7906..db5ce52ee510 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -105,6 +105,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5420-arndale-octa.dtb \ exynos5420-peach-pit.dtb \ exynos5420-smdk5420.dtb \ + exynos5422-odroidxu3.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb \ exynos5800-peach-pi.dtb diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 24822aa98057..5e4a471faee1 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -15,6 +15,7 @@ /dts-v1/; #include "exynos3250.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Samsung Monk board"; @@ -37,9 +38,7 @@ compatible = "gpio-keys"; power_key { - interrupt-parent = <&gpx2>; - interrupts = <7 0>; - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; debounce-interval = <10>; @@ -134,6 +133,16 @@ }; }; +&exynos_usbphy { + status = "okay"; +}; + +&hsotg { + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; + status = "okay"; +}; + &i2c_0 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 80aa8b4c4a3d..c7f4fab6dfd9 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -15,6 +15,7 @@ /dts-v1/; #include "exynos3250.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Samsung Rinato board"; @@ -37,9 +38,7 @@ compatible = "gpio-keys"; power_key { - interrupt-parent = <&gpx2>; - interrupts = <7 0>; - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; debounce-interval = <10>; @@ -125,6 +124,86 @@ }; }; +&exynos_usbphy { + status = "okay"; +}; + +&hsotg { + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; + status = "okay"; +}; + +&dsi_0 { + vddcore-supply = <&ldo6_reg>; + vddio-supply = <&ldo6_reg>; + samsung,pll-clock-frequency = <24000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_out: endpoint { + remote-endpoint = <&dsi_in>; + samsung,burst-clock-frequency = <250000000>; + samsung,esc-clock-frequency = <20000000>; + }; + }; + }; + + panel@0 { + compatible = "samsung,s6e63j0x03"; + reg = <0>; + vdd3-supply = <&ldo16_reg>; + vci-supply = <&ldo20_reg>; + reset-gpios = <&gpe0 1 0>; + te-gpios = <&gpx0 6 0>; + power-on-delay= <30>; + power-off-delay= <120>; + reset-delay = <5>; + init-delay = <100>; + flip-horizontal; + flip-vertical; + panel-width-mm = <29>; + panel-height-mm = <29>; + + display-timings { + timing-0 { + clock-frequency = <0>; + hactive = <320>; + vactive = <320>; + hfront-porch = <1>; + hback-porch = <1>; + hsync-len = <1>; + vfront-porch = <150>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + + port { + dsi_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&fimd { + status = "okay"; + + i80-if-timings { + cs-setup = <0>; + wr-setup = <0>; + wr-act = <1>; + wr-hold = <0>; + }; +}; + &i2c_0 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 22465494b796..204a84be5b87 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -255,6 +255,17 @@ status = "disabled"; }; + hsotg: hsotg@12480000 { + compatible = "snps,dwc2"; + reg = <0x12480000 0x20000>; + interrupts = <0 141 0>; + clocks = <&cmu CLK_USBOTG>; + clock-names = "otg"; + phys = <&exynos_usbphy 0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + mshc_0: mshc@12510000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12510000 0x1000>; @@ -279,6 +290,16 @@ status = "disabled"; }; + exynos_usbphy: exynos-usbphy@125B0000 { + compatible = "samsung,exynos3250-usb2-phy"; + reg = <0x125B0000 0x100>; + samsung,pmureg-phandle = <&pmu_system_controller>; + clocks = <&cmu CLK_USBOTG>, <&cmu CLK_SCLK_UPLL>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + status = "disabled"; + }; + amba { compatible = "arm,amba-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index effaf2af41bc..b9aeec430527 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -33,6 +33,8 @@ gpio-keys { compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&power_key_irq &lid_irq>; power { label = "Power"; @@ -540,6 +542,13 @@ }; &pinctrl_0 { + power_key_irq: power-key-irq { + samsung,pins = "gpx1-3"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + ec_irq: ec-irq { samsung,pins = "gpx1-6"; samsung,pin-function = <0>; @@ -575,6 +584,13 @@ samsung,pin-drv = <0>; }; + lid_irq: lid-irq { + samsung,pins = "gpx3-5"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + hdmi_hpd_irq: hdmi-hpd-irq { samsung,pins = "gpx3-7"; samsung,pin-function = <0>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 9a050e19a4dc..c47bb70665c1 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -13,6 +13,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/maxim,max77802.h> +#include <dt-bindings/regulator/maxim,max77802.h> #include "exynos5420.dtsi" / { @@ -53,7 +54,7 @@ compatible = "gpio-keys"; pinctrl-names = "default"; - pinctrl-0 = <&power_key_irq>; + pinctrl-0 = <&power_key_irq &lid_irq>; power { label = "Power"; @@ -61,6 +62,15 @@ linux,code = <KEY_POWER>; gpio-key,wakeup; }; + + lid-switch { + label = "Lid"; + gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + debounce-interval = <1>; + gpio-key,wakeup; + }; }; memory { @@ -192,6 +202,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck2_reg: BUCK2 { @@ -201,6 +214,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck3_reg: BUCK3 { @@ -210,6 +226,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck4_reg: BUCK4 { @@ -219,6 +238,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck5_reg: BUCK5 { @@ -227,6 +249,9 @@ regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck6_reg: BUCK6 { @@ -236,6 +261,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck7_reg: BUCK7 { @@ -244,6 +272,9 @@ regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; buck8_reg: BUCK8 { @@ -252,6 +283,9 @@ regulator-max-microvolt = <2850000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck9_reg: BUCK9 { @@ -260,6 +294,9 @@ regulator-max-microvolt = <2000000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; buck10_reg: BUCK10 { @@ -268,6 +305,9 @@ regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo1_reg: LDO1 { @@ -275,6 +315,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo2_reg: LDO2 { @@ -288,6 +332,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; vqmmc_sdcard: ldo4_reg: LDO4 { @@ -295,6 +343,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo5_reg: LDO5 { @@ -302,6 +353,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo6_reg: LDO6 { @@ -309,6 +363,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo7_reg: LDO7 { @@ -322,6 +379,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo9_reg: LDO9 { @@ -329,6 +389,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo10_reg: LDO10 { @@ -336,6 +400,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo11_reg: LDO11 { @@ -343,6 +410,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo12_reg: LDO12 { @@ -350,6 +421,9 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo13_reg: LDO13 { @@ -357,6 +431,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo14_reg: LDO14 { @@ -364,6 +442,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo15_reg: LDO15 { @@ -371,6 +452,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo17_reg: LDO17 { @@ -378,6 +462,9 @@ regulator-min-microvolt = <900000>; regulator-max-microvolt = <1400000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo18_reg: LDO18 { @@ -451,6 +538,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo32_reg: LDO32 { @@ -658,6 +748,13 @@ samsung,pin-drv = <0>; }; + lid_irq: lid-irq { + samsung,pins = "gpx3-4"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + hdmi_hpd_irq: hdmi-hpd-irq { samsung,pins = "gpx3-7"; samsung,pin-function = <0>; @@ -815,6 +912,7 @@ }; tps65090_fet5: fet5 { regulator-name = "camout"; + regulator-always-on; }; tps65090_fet6: fet6 { regulator-name = "lcd_vdd"; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts new file mode 100644 index 000000000000..c29123c0734d --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -0,0 +1,332 @@ +/* + * Hardkernel Odroid XU3 board device tree source + * + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5800.dtsi" + +/ { + model = "Hardkernel Odroid XU3"; + compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + linux,stdout-path = &serial_2; + }; + + fimd@14400000 { + status = "okay"; + }; + + firmware@02073000 { + compatible = "samsung,secure-firmware"; + reg = <0x02073000 0x1000>; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; + + hsi2c_4: i2c@12CA0000 { + status = "okay"; + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + s2mps11,buck2-ramp-delay = <12>; + s2mps11,buck34-ramp-delay = <12>; + s2mps11,buck16-ramp-delay = <12>; + s2mps11,buck6-ramp-enable = <1>; + s2mps11,buck2-ramp-enable = <1>; + s2mps11,buck3-ramp-enable = <1>; + s2mps11,buck4-ramp-enable = <1>; + + s2mps11_osc: clocks { + #clock-cells = <1>; + clock-output-names = "s2mps11_ap", + "s2mps11_cp", "s2mps11_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "vdd_ldo1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "vdd_ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd_ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_ldo6"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "vdd_ldo13"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "vdd_ldo16"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "tsp_avdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo19_reg: LDO19 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo24_reg: LDO24 { + regulator-name = "tsp_io"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_mem"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "vdd_1.0v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "vdd_1.8v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_2.8v_ldo"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3750000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_vmem"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; + + i2c_2: i2c@12C80000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + status = "okay"; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; + }; + + rtc@101E0000 { + status = "okay"; + }; +}; + +&hdmi { + status = "okay"; + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + + vdd_osc-supply = <&ldo7_reg>; + vdd_pll-supply = <&ldo6_reg>; + vdd-supply = <&ldo6_reg>; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + bus-width = <4>; + cap-sd-highspeed; +}; + +&pinctrl_0 { + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "otg"; +}; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index e8fdda827fc9..06737c60d333 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -13,6 +13,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/maxim,max77802.h> +#include <dt-bindings/regulator/maxim,max77802.h> #include "exynos5800.dtsi" / { @@ -52,7 +53,7 @@ compatible = "gpio-keys"; pinctrl-names = "default"; - pinctrl-0 = <&power_key_irq>; + pinctrl-0 = <&power_key_irq &lid_irq>; power { label = "Power"; @@ -60,6 +61,16 @@ linux,code = <KEY_POWER>; gpio-key,wakeup; }; + + lid-switch { + label = "Lid"; + gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; memory { @@ -191,6 +202,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck2_reg: BUCK2 { @@ -200,6 +214,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck3_reg: BUCK3 { @@ -209,6 +226,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck4_reg: BUCK4 { @@ -218,6 +238,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck5_reg: BUCK5 { @@ -226,6 +249,9 @@ regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck6_reg: BUCK6 { @@ -235,6 +261,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck7_reg: BUCK7 { @@ -243,6 +272,9 @@ regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; buck8_reg: BUCK8 { @@ -251,6 +283,9 @@ regulator-max-microvolt = <2850000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck9_reg: BUCK9 { @@ -259,6 +294,9 @@ regulator-max-microvolt = <2000000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; buck10_reg: BUCK10 { @@ -267,6 +305,9 @@ regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo1_reg: LDO1 { @@ -274,6 +315,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo2_reg: LDO2 { @@ -287,6 +332,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; vqmmc_sdcard: ldo4_reg: LDO4 { @@ -294,6 +343,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo5_reg: LDO5 { @@ -301,6 +353,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo6_reg: LDO6 { @@ -308,6 +363,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo7_reg: LDO7 { @@ -321,6 +379,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo9_reg: LDO9 { @@ -328,6 +389,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo10_reg: LDO10 { @@ -335,6 +400,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo11_reg: LDO11 { @@ -342,6 +410,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo12_reg: LDO12 { @@ -349,6 +421,9 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo13_reg: LDO13 { @@ -356,6 +431,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo14_reg: LDO14 { @@ -363,6 +442,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo15_reg: LDO15 { @@ -370,6 +452,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo17_reg: LDO17 { @@ -377,6 +462,9 @@ regulator-min-microvolt = <900000>; regulator-max-microvolt = <1400000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo18_reg: LDO18 { @@ -450,6 +538,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo32_reg: LDO32 { @@ -646,6 +737,13 @@ samsung,pin-drv = <0>; }; + lid_irq: lid-irq { + samsung,pins = "gpx3-4"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + hdmi_hpd_irq: hdmi-hpd-irq { samsung,pins = "gpx3-7"; samsung,pin-function = <0>; @@ -803,6 +901,7 @@ }; tps65090_fet5: fet5 { regulator-name = "camout"; + regulator-always-on; }; tps65090_fet6: fet6 { regulator-name = "lcd_vdd"; |