diff options
50 files changed, 1108 insertions, 250 deletions
diff --git a/Documentation/devicetree/bindings/mtd/mxc-nand.yaml b/Documentation/devicetree/bindings/mtd/mxc-nand.yaml index 73b86f2226c7..66da1b476ab7 100644 --- a/Documentation/devicetree/bindings/mtd/mxc-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/mxc-nand.yaml @@ -37,6 +37,4 @@ examples: compatible = "fsl,imx27-nand"; reg = <0xd8000000 0x1000>; interrupts = <29>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; }; diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml index e1ac08064425..f1a02d840b12 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml @@ -11,6 +11,17 @@ description: | relative offset and size specified. Depending on partition function extra properties can be used. + A partition may be dynamically allocated by a specific parser at runtime. + In this specific case, a specific suffix is required to the node name. + Everything after 'partition-' will be used as the partition name to compare + with the one dynamically allocated by the specific parser. + If the partition contains invalid char a label can be provided that will + be used instead of the node name to make the comparison. + This is used to assign an OF node to the dynamiccally allocated partition + so that subsystem like NVMEM can provide an OF node and declare NVMEM cells. + The OF node will be assigned only if the partition label declared match the + one assigned by the parser at runtime. + maintainers: - Rafał Miłecki <rafal@milecki.pl> @@ -41,7 +52,12 @@ properties: immune to paired-pages corruptions type: boolean -required: - - reg +if: + not: + required: [ reg ] +then: + properties: + $nodename: + pattern: '^partition-.*$' additionalProperties: true diff --git a/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml index cf3f8c1e035d..dc07909af023 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml @@ -19,6 +19,10 @@ properties: compatible: const: qcom,smem-part +patternProperties: + "^partition-[0-9a-z]+$": + $ref: partition.yaml# + required: - compatible @@ -31,3 +35,26 @@ examples: compatible = "qcom,smem-part"; }; }; + + - | + /* Example declaring dynamic partition */ + flash { + partitions { + compatible = "qcom,smem-part"; + + partition-art { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + label = "0:art"; + + macaddr_art_0: macaddr@0 { + reg = <0x0 0x6>; + }; + + macaddr_art_6: macaddr@6 { + reg = <0x6 0x6>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml index 84ad7ff30121..482a2c068740 100644 --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml @@ -102,6 +102,31 @@ allOf: - const: rx - const: cmd + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq806x-nand + + then: + properties: + qcom,boot-partitions: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: offset + - description: size + description: + Boot partition use a different layout where the 4 bytes of spare + data are not protected by ECC. Use this to declare these special + partitions by defining first the offset and then the size. + + It's in the form of <offset1 size1 offset2 size2 offset3 ...> + and should be declared in ascending order. + + Refer to the ipq8064 example on how to use this special binding. + required: - compatible - reg @@ -135,6 +160,8 @@ examples: nand-ecc-strength = <4>; nand-bus-width = <8>; + qcom,boot-partitions = <0x0 0x58a0000>; + partitions { compatible = "fixed-partitions"; #address-cells = <1>; diff --git a/MAINTAINERS b/MAINTAINERS index 9fbc30d3c95e..b995141d251f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19130,7 +19130,7 @@ F: drivers/pinctrl/spear/ SPI NOR SUBSYSTEM M: Tudor Ambarus <tudor.ambarus@microchip.com> -M: Pratyush Yadav <p.yadav@ti.com> +M: Pratyush Yadav <pratyush@kernel.org> R: Michael Walle <michael@walle.cc> L: linux-mtd@lists.infradead.org S: Maintained diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 134e27328597..25bad4318305 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -112,6 +112,13 @@ static const struct of_device_id dataflash_dt_ids[] = { MODULE_DEVICE_TABLE(of, dataflash_dt_ids); #endif +static const struct spi_device_id dataflash_spi_ids[] = { + { .name = "at45", }, + { .name = "dataflash", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(spi, dataflash_spi_ids); + /* ......................................................................... */ /* @@ -936,6 +943,7 @@ static struct spi_driver dataflash_driver = { .probe = dataflash_probe, .remove = dataflash_remove, + .id_table = dataflash_spi_ids, /* FIXME: investigate suspend and resume... */ }; diff --git a/drivers/mtd/devices/powernv_flash.c b/drivers/mtd/devices/powernv_flash.c index 6950a8764815..36e060386e59 100644 --- a/drivers/mtd/devices/powernv_flash.c +++ b/drivers/mtd/devices/powernv_flash.c @@ -270,7 +270,9 @@ static int powernv_flash_release(struct platform_device *pdev) struct powernv_flash *data = dev_get_drvdata(&(pdev->dev)); /* All resources should be freed automatically */ - return mtd_device_unregister(&(data->mtd)); + WARN_ON(mtd_device_unregister(&data->mtd)); + + return 0; } static const struct of_device_id powernv_flash_match[] = { diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c index 24073518587f..f58742486d3d 100644 --- a/drivers/mtd/devices/spear_smi.c +++ b/drivers/mtd/devices/spear_smi.c @@ -1045,13 +1045,9 @@ static int spear_smi_remove(struct platform_device *pdev) { struct spear_smi *dev; struct spear_snor_flash *flash; - int ret, i; + int i; dev = platform_get_drvdata(pdev); - if (!dev) { - dev_err(&pdev->dev, "dev is null\n"); - return -ENODEV; - } /* clean up for all nor flash */ for (i = 0; i < dev->num_flashes; i++) { @@ -1060,9 +1056,7 @@ static int spear_smi_remove(struct platform_device *pdev) continue; /* clean up mtd stuff */ - ret = mtd_device_unregister(&flash->mtd); - if (ret) - dev_err(&pdev->dev, "error removing mtd\n"); + WARN_ON(mtd_device_unregister(&flash->mtd)); } clk_disable_unprepare(dev->clk); diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c index d3377b10fc0f..54861d889c30 100644 --- a/drivers/mtd/devices/st_spi_fsm.c +++ b/drivers/mtd/devices/st_spi_fsm.c @@ -2084,15 +2084,12 @@ static int stfsm_probe(struct platform_device *pdev) * Configure READ/WRITE/ERASE sequences according to platform and * device flags. */ - if (info->config) { + if (info->config) ret = info->config(fsm); - if (ret) - goto err_clk_unprepare; - } else { + else ret = stfsm_prepare_rwe_seqs_default(fsm); - if (ret) - goto err_clk_unprepare; - } + if (ret) + goto err_clk_unprepare; fsm->mtd.name = info->name; fsm->mtd.dev.parent = &pdev->dev; @@ -2115,10 +2112,12 @@ static int stfsm_probe(struct platform_device *pdev) (long long)fsm->mtd.size, (long long)(fsm->mtd.size >> 20), fsm->mtd.erasesize, (fsm->mtd.erasesize >> 10)); - return mtd_device_register(&fsm->mtd, NULL, 0); - + ret = mtd_device_register(&fsm->mtd, NULL, 0); + if (ret) { err_clk_unprepare: - clk_disable_unprepare(fsm->clk); + clk_disable_unprepare(fsm->clk); + } + return ret; } @@ -2126,9 +2125,11 @@ static int stfsm_remove(struct platform_device *pdev) { struct stfsm *fsm = platform_get_drvdata(pdev); + WARN_ON(mtd_device_unregister(&fsm->mtd)); + clk_disable_unprepare(fsm->clk); - return mtd_device_unregister(&fsm->mtd); + return 0; } #ifdef CONFIG_PM_SLEEP diff --git a/drivers/mtd/hyperbus/hbmc-am654.c b/drivers/mtd/hyperbus/hbmc-am654.c index a3439b791eeb..a6161ce340d4 100644 --- a/drivers/mtd/hyperbus/hbmc-am654.c +++ b/drivers/mtd/hyperbus/hbmc-am654.c @@ -233,16 +233,16 @@ static int am654_hbmc_remove(struct platform_device *pdev) { struct am654_hbmc_priv *priv = platform_get_drvdata(pdev); struct am654_hbmc_device_priv *dev_priv = priv->hbdev.priv; - int ret; - ret = hyperbus_unregister_device(&priv->hbdev); + hyperbus_unregister_device(&priv->hbdev); + if (priv->mux_ctrl) mux_control_deselect(priv->mux_ctrl); if (dev_priv->rx_chan) dma_release_channel(dev_priv->rx_chan); - return ret; + return 0; } static const struct of_device_id am654_hbmc_dt_ids[] = { diff --git a/drivers/mtd/hyperbus/hyperbus-core.c b/drivers/mtd/hyperbus/hyperbus-core.c index 2f9fc4e17d53..4d8047d43e48 100644 --- a/drivers/mtd/hyperbus/hyperbus-core.c +++ b/drivers/mtd/hyperbus/hyperbus-core.c @@ -126,16 +126,12 @@ int hyperbus_register_device(struct hyperbus_device *hbdev) } EXPORT_SYMBOL_GPL(hyperbus_register_device); -int hyperbus_unregister_device(struct hyperbus_device *hbdev) +void hyperbus_unregister_device(struct hyperbus_device *hbdev) { - int ret = 0; - if (hbdev && hbdev->mtd) { - ret = mtd_device_unregister(hbdev->mtd); + WARN_ON(mtd_device_unregister(hbdev->mtd)); map_destroy(hbdev->mtd); } - - return ret; } EXPORT_SYMBOL_GPL(hyperbus_unregister_device); diff --git a/drivers/mtd/hyperbus/rpc-if.c b/drivers/mtd/hyperbus/rpc-if.c index 6e08ec1d4f09..d00d30243403 100644 --- a/drivers/mtd/hyperbus/rpc-if.c +++ b/drivers/mtd/hyperbus/rpc-if.c @@ -134,7 +134,7 @@ static int rpcif_hb_probe(struct platform_device *pdev) error = rpcif_hw_init(&hyperbus->rpc, true); if (error) - return error; + goto out_disable_rpm; hyperbus->hbdev.map.size = hyperbus->rpc.size; hyperbus->hbdev.map.virt = hyperbus->rpc.dirmap; @@ -145,19 +145,24 @@ static int rpcif_hb_probe(struct platform_device *pdev) hyperbus->hbdev.np = of_get_next_child(pdev->dev.parent->of_node, NULL); error = hyperbus_register_device(&hyperbus->hbdev); if (error) - rpcif_disable_rpm(&hyperbus->rpc); + goto out_disable_rpm; + + return 0; +out_disable_rpm: + rpcif_disable_rpm(&hyperbus->rpc); return error; } static int rpcif_hb_remove(struct platform_device *pdev) { struct rpcif_hyperbus *hyperbus = platform_get_drvdata(pdev); - int error = hyperbus_unregister_device(&hyperbus->hbdev); + + hyperbus_unregister_device(&hyperbus->hbdev); rpcif_disable_rpm(&hyperbus->rpc); - return error; + return 0; } static struct platform_driver rpcif_platform_driver = { diff --git a/drivers/mtd/lpddr/lpddr2_nvm.c b/drivers/mtd/lpddr/lpddr2_nvm.c index 72f5c7b30079..367e2d906de0 100644 --- a/drivers/mtd/lpddr/lpddr2_nvm.c +++ b/drivers/mtd/lpddr/lpddr2_nvm.c @@ -478,7 +478,9 @@ static int lpddr2_nvm_probe(struct platform_device *pdev) */ static int lpddr2_nvm_remove(struct platform_device *pdev) { - return mtd_device_unregister(dev_get_drvdata(&pdev->dev)); + WARN_ON(mtd_device_unregister(dev_get_drvdata(&pdev->dev))); + + return 0; } /* Initialize platform_driver data structure for lpddr2_nvm */ diff --git a/drivers/mtd/maps/physmap-core.c b/drivers/mtd/maps/physmap-core.c index 4f63b8430c71..85eca6a192e6 100644 --- a/drivers/mtd/maps/physmap-core.c +++ b/drivers/mtd/maps/physmap-core.c @@ -66,18 +66,12 @@ static int physmap_flash_remove(struct platform_device *dev) { struct physmap_flash_info *info; struct physmap_flash_data *physmap_data; - int i, err = 0; + int i; info = platform_get_drvdata(dev); - if (!info) { - err = -EINVAL; - goto out; - } if (info->cmtd) { - err = mtd_device_unregister(info->cmtd); - if (err) - goto out; + WARN_ON(mtd_device_unregister(info->cmtd)); if (info->cmtd != info->mtds[0]) mtd_concat_destroy(info->cmtd); @@ -92,10 +86,9 @@ static int physmap_flash_remove(struct platform_device *dev) if (physmap_data && physmap_data->exit) physmap_data->exit(dev); -out: pm_runtime_put(&dev->dev); pm_runtime_disable(&dev->dev); - return err; + return 0; } static void physmap_set_vpp(struct map_info *map, int state) diff --git a/drivers/mtd/maps/physmap-versatile.c b/drivers/mtd/maps/physmap-versatile.c index ad7cd9cfaee0..a1b8b7b25f88 100644 --- a/drivers/mtd/maps/physmap-versatile.c +++ b/drivers/mtd/maps/physmap-versatile.c @@ -93,6 +93,7 @@ static int ap_flash_init(struct platform_device *pdev) return -ENODEV; } ebi_base = of_iomap(ebi, 0); + of_node_put(ebi); if (!ebi_base) return -ENODEV; @@ -207,6 +208,7 @@ int of_flash_probe_versatile(struct platform_device *pdev, versatile_flashprot = (enum versatile_flashprot)devid->data; rmap = syscon_node_to_regmap(sysnp); + of_node_put(sysnp); if (IS_ERR(rmap)) return PTR_ERR(rmap); diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index d0f9c4b0285c..05860288a7af 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -615,21 +615,24 @@ static int mtdchar_write_ioctl(struct mtd_info *mtd, if (!usr_oob) req.ooblen = 0; + req.len &= 0xffffffff; + req.ooblen &= 0xffffffff; + if (req.start + req.len > mtd->size) return -EINVAL; datbuf_len = min_t(size_t, req.len, mtd->erasesize); if (datbuf_len > 0) { - datbuf = kmalloc(datbuf_len, GFP_KERNEL); + datbuf = kvmalloc(datbuf_len, GFP_KERNEL); if (!datbuf) return -ENOMEM; } oobbuf_len = min_t(size_t, req.ooblen, mtd->erasesize); if (oobbuf_len > 0) { - oobbuf = kmalloc(oobbuf_len, GFP_KERNEL); + oobbuf = kvmalloc(oobbuf_len, GFP_KERNEL); if (!oobbuf) { - kfree(datbuf); + kvfree(datbuf); return -ENOMEM; } } @@ -679,8 +682,8 @@ static int mtdchar_write_ioctl(struct mtd_info *mtd, usr_oob += ops.oobretlen; } - kfree(datbuf); - kfree(oobbuf); + kvfree(datbuf); + kvfree(oobbuf); return ret; } diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 9eb0680db312..a9b8be9f40dc 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -546,6 +546,68 @@ static int mtd_nvmem_add(struct mtd_info *mtd) return 0; } +static void mtd_check_of_node(struct mtd_info *mtd) +{ + struct device_node *partitions, *parent_dn, *mtd_dn = NULL; + const char *pname, *prefix = "partition-"; + int plen, mtd_name_len, offset, prefix_len; + struct mtd_info *parent; + bool found = false; + + /* Check if MTD already has a device node */ + if (dev_of_node(&mtd->dev)) + return; + + /* Check if a partitions node exist */ + if (!mtd_is_partition(mtd)) + return; + parent = mtd->parent; + parent_dn = dev_of_node(&parent->dev); + if (!parent_dn) + return; + + partitions = of_get_child_by_name(parent_dn, "partitions"); + if (!partitions) + goto exit_parent; + + prefix_len = strlen(prefix); + mtd_name_len = strlen(mtd->name); + + /* Search if a partition is defined with the same name */ + for_each_child_of_node(partitions, mtd_dn) { + offset = 0; + + /* Skip partition with no/wrong prefix */ + if (!of_node_name_prefix(mtd_dn, "partition-")) + continue; + + /* Label have priority. Check that first */ + if (of_property_read_string(mtd_dn, "label", &pname)) { + of_property_read_string(mtd_dn, "name", &pname); + offset = prefix_len; + } + + plen = strlen(pname) - offset; + if (plen == mtd_name_len && + !strncmp(mtd->name, pname + offset, plen)) { + found = true; + break; + } + } + + if (!found) + goto exit_partitions; + + /* Set of_node only for nvmem */ + if (of_device_is_compatible(mtd_dn, "nvmem-cells")) + mtd_set_of_node(mtd, mtd_dn); + +exit_partitions: + of_node_put(partitions); +exit_parent: + of_node_put(parent_dn); +} + /** * add_mtd_device - register an MTD device * @mtd: pointer to new MTD device info structure @@ -658,6 +720,7 @@ int add_mtd_device(struct mtd_info *mtd) mtd->dev.devt = MTD_DEVT(i); dev_set_name(&mtd->dev, "mtd%d", i); dev_set_drvdata(&mtd->dev, mtd); + mtd_check_of_node(mtd); of_node_get(mtd_get_of_node(mtd)); error = device_register(&mtd->dev); if (error) diff --git a/drivers/mtd/nand/raw/arasan-nand-controller.c b/drivers/mtd/nand/raw/arasan-nand-controller.c index 53bd10738418..296fb16c8dc3 100644 --- a/drivers/mtd/nand/raw/arasan-nand-controller.c +++ b/drivers/mtd/nand/raw/arasan-nand-controller.c @@ -347,17 +347,17 @@ static int anfc_select_target(struct nand_chip *chip, int target) /* Update clock frequency */ if (nfc->cur_clk != anand->clk) { - clk_disable_unprepare(nfc->controller_clk); - ret = clk_set_rate(nfc->controller_clk, anand->clk); + clk_disable_unprepare(nfc->bus_clk); + ret = clk_set_rate(nfc->bus_clk, anand->clk); if (ret) { dev_err(nfc->dev, "Failed to change clock rate\n"); return ret; } - ret = clk_prepare_enable(nfc->controller_clk); + ret = clk_prepare_enable(nfc->bus_clk); if (ret) { dev_err(nfc->dev, - "Failed to re-enable the controller clock\n"); + "Failed to re-enable the bus clock\n"); return ret; } @@ -1043,7 +1043,13 @@ static int anfc_setup_interface(struct nand_chip *chip, int target, DQS_BUFF_SEL_OUT(dqs_mode); } - anand->clk = ANFC_XLNX_SDR_DFLT_CORE_CLK; + if (nand_interface_is_sdr(conf)) { + anand->clk = ANFC_XLNX_SDR_DFLT_CORE_CLK; + } else { + /* ONFI timings are defined in picoseconds */ + anand->clk = div_u64((u64)NSEC_PER_SEC * 1000, + conf->timings.nvddr.tCK_min); + } /* * Due to a hardware bug in the ZynqMP SoC, SDR timing modes 0-1 work diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c index 6ef14442c71a..c9ac3baf68c0 100644 --- a/drivers/mtd/nand/raw/atmel/nand-controller.c +++ b/drivers/mtd/nand/raw/atmel/nand-controller.c @@ -2629,7 +2629,9 @@ static int atmel_nand_controller_remove(struct platform_device *pdev) { struct atmel_nand_controller *nc = platform_get_drvdata(pdev); - return nc->caps->ops->remove(nc); + WARN_ON(nc->caps->ops->remove(nc)); + + return 0; } static __maybe_unused int atmel_nand_controller_resume(struct device *dev) diff --git a/drivers/mtd/nand/raw/cafe_nand.c b/drivers/mtd/nand/raw/cafe_nand.c index 9dbf031716a6..af119e376352 100644 --- a/drivers/mtd/nand/raw/cafe_nand.c +++ b/drivers/mtd/nand/raw/cafe_nand.c @@ -679,8 +679,10 @@ static int cafe_nand_probe(struct pci_dev *pdev, pci_set_master(pdev); cafe = kzalloc(sizeof(*cafe), GFP_KERNEL); - if (!cafe) - return -ENOMEM; + if (!cafe) { + err = -ENOMEM; + goto out_disable_device; + } mtd = nand_to_mtd(&cafe->nand); mtd->dev.parent = &pdev->dev; @@ -801,6 +803,8 @@ static int cafe_nand_probe(struct pci_dev *pdev, pci_iounmap(pdev, cafe->mmio); out_free_mtd: kfree(cafe); + out_disable_device: + pci_disable_device(pdev); out: return err; } @@ -822,6 +826,7 @@ static void cafe_nand_remove(struct pci_dev *pdev) pci_iounmap(pdev, cafe->mmio); dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr); kfree(cafe); + pci_disable_device(pdev); } static const struct pci_device_id cafe_nand_tbl[] = { diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c index ac3be92872d0..829b76b303aa 100644 --- a/drivers/mtd/nand/raw/meson_nand.c +++ b/drivers/mtd/nand/raw/meson_nand.c @@ -1293,26 +1293,20 @@ meson_nfc_nand_chip_init(struct device *dev, return 0; } -static int meson_nfc_nand_chip_cleanup(struct meson_nfc *nfc) +static void meson_nfc_nand_chip_cleanup(struct meson_nfc *nfc) { struct meson_nfc_nand_chip *meson_chip; struct mtd_info *mtd; - int ret; while (!list_empty(&nfc->chips)) { meson_chip = list_first_entry(&nfc->chips, struct meson_nfc_nand_chip, node); mtd = nand_to_mtd(&meson_chip->nand); - ret = mtd_device_unregister(mtd); - if (ret) - return ret; + WARN_ON(mtd_device_unregister(mtd)); - meson_nfc_free_buffer(&meson_chip->nand); nand_cleanup(&meson_chip->nand); list_del(&meson_chip->node); } - - return 0; } static int meson_nfc_nand_chips_init(struct device *dev, @@ -1445,16 +1439,11 @@ err_clk: static int meson_nfc_remove(struct platform_device *pdev) { struct meson_nfc *nfc = platform_get_drvdata(pdev); - int ret; - ret = meson_nfc_nand_chip_cleanup(nfc); - if (ret) - return ret; + meson_nfc_nand_chip_cleanup(nfc); meson_nfc_disable_clk(nfc); - platform_set_drvdata(pdev, NULL); - return 0; } diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c index 58c32a11792e..4a9f2b6c772d 100644 --- a/drivers/mtd/nand/raw/omap2.c +++ b/drivers/mtd/nand/raw/omap2.c @@ -2278,16 +2278,14 @@ static int omap_nand_remove(struct platform_device *pdev) struct mtd_info *mtd = platform_get_drvdata(pdev); struct nand_chip *nand_chip = mtd_to_nand(mtd); struct omap_nand_info *info = mtd_to_omap(mtd); - int ret; rawnand_sw_bch_cleanup(nand_chip); if (info->dma) dma_release_channel(info->dma); - ret = mtd_device_unregister(mtd); - WARN_ON(ret); + WARN_ON(mtd_device_unregister(mtd)); nand_cleanup(nand_chip); - return ret; + return 0; } /* omap_nand_ids defined in linux/platform_data/mtd-nand-omap2.h */ diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index 048b255faa76..8f80019a9f01 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -80,8 +80,10 @@ #define DISABLE_STATUS_AFTER_WRITE 4 #define CW_PER_PAGE 6 #define UD_SIZE_BYTES 9 +#define UD_SIZE_BYTES_MASK GENMASK(18, 9) #define ECC_PARITY_SIZE_BYTES_RS 19 #define SPARE_SIZE_BYTES 23 +#define SPARE_SIZE_BYTES_MASK GENMASK(26, 23) #define NUM_ADDR_CYCLES 27 #define STATUS_BFR_READ 30 #define SET_RD_MODE_AFTER_STATUS 31 @@ -102,6 +104,7 @@ #define ECC_MODE 4 #define ECC_PARITY_SIZE_BYTES_BCH 8 #define ECC_NUM_DATA_BYTES 16 +#define ECC_NUM_DATA_BYTES_MASK GENMASK(25, 16) #define ECC_FORCE_CLK_OPEN 30 /* NAND_DEV_CMD1 bits */ @@ -238,6 +241,9 @@ nandc_set_reg(chip, reg, \ * @bam_ce - the array of BAM command elements * @cmd_sgl - sgl for NAND BAM command pipe * @data_sgl - sgl for NAND BAM consumer/producer pipe + * @last_data_desc - last DMA desc in data channel (tx/rx). + * @last_cmd_desc - last DMA desc in command channel. + * @txn_done - completion for NAND transfer. * @bam_ce_pos - the index in bam_ce which is available for next sgl * @bam_ce_start - the index in bam_ce which marks the start position ce * for current sgl. It will be used for size calculation @@ -250,14 +256,14 @@ nandc_set_reg(chip, reg, \ * @rx_sgl_start - start index in data sgl for rx. * @wait_second_completion - wait for second DMA desc completion before making * the NAND transfer completion. - * @txn_done - completion for NAND transfer. - * @last_data_desc - last DMA desc in data channel (tx/rx). - * @last_cmd_desc - last DMA desc in command channel. */ struct bam_transaction { struct bam_cmd_element *bam_ce; struct scatterlist *cmd_sgl; struct scatterlist *data_sgl; + struct dma_async_tx_descriptor *last_data_desc; + struct dma_async_tx_descriptor *last_cmd_desc; + struct completion txn_done; u32 bam_ce_pos; u32 bam_ce_start; u32 cmd_sgl_pos; @@ -267,25 +273,23 @@ struct bam_transaction { u32 rx_sgl_pos; u32 rx_sgl_start; bool wait_second_completion; - struct completion txn_done; - struct dma_async_tx_descriptor *last_data_desc; - struct dma_async_tx_descriptor *last_cmd_desc; }; /* * This data type corresponds to the nand dma descriptor + * @dma_desc - low level DMA engine descriptor * @list - list for desc_info - * @dir - DMA transfer direction + * * @adm_sgl - sgl which will be used for single sgl dma descriptor. Only used by * ADM * @bam_sgl - sgl which will be used for dma descriptor. Only used by BAM * @sgl_cnt - number of SGL in bam_sgl. Only used by BAM - * @dma_desc - low level DMA engine descriptor + * @dir - DMA transfer direction */ struct desc_info { + struct dma_async_tx_descriptor *dma_desc; struct list_head node; - enum dma_data_direction dir; union { struct scatterlist adm_sgl; struct { @@ -293,7 +297,7 @@ struct desc_info { int sgl_cnt; }; }; - struct dma_async_tx_descriptor *dma_desc; + enum dma_data_direction dir; }; /* @@ -337,52 +341,64 @@ struct nandc_regs { /* * NAND controller data struct * - * @controller: base controller structure - * @host_list: list containing all the chips attached to the - * controller * @dev: parent device + * * @base: MMIO base - * @base_phys: physical base address of controller registers - * @base_dma: dma base address of controller registers + * * @core_clk: controller clock * @aon_clk: another controller clock * + * @regs: a contiguous chunk of memory for DMA register + * writes. contains the register values to be + * written to controller + * + * @props: properties of current NAND controller, + * initialized via DT match data + * + * @controller: base controller structure + * @host_list: list containing all the chips attached to the + * controller + * * @chan: dma channel * @cmd_crci: ADM DMA CRCI for command flow control * @data_crci: ADM DMA CRCI for data flow control + * * @desc_list: DMA descriptor list (list of desc_infos) * * @data_buffer: our local DMA buffer for page read/writes, * used when we can't use the buffer provided * by upper layers directly - * @buf_size/count/start: markers for chip->legacy.read_buf/write_buf - * functions * @reg_read_buf: local buffer for reading back registers via DMA + * + * @base_phys: physical base address of controller registers + * @base_dma: dma base address of controller registers * @reg_read_dma: contains dma address for register read buffer - * @reg_read_pos: marker for data read in reg_read_buf * - * @regs: a contiguous chunk of memory for DMA register - * writes. contains the register values to be - * written to controller - * @cmd1/vld: some fixed controller register values - * @props: properties of current NAND controller, - * initialized via DT match data + * @buf_size/count/start: markers for chip->legacy.read_buf/write_buf + * functions * @max_cwperpage: maximum QPIC codewords required. calculated * from all connected NAND devices pagesize + * + * @reg_read_pos: marker for data read in reg_read_buf + * + * @cmd1/vld: some fixed controller register values */ struct qcom_nand_controller { - struct nand_controller controller; - struct list_head host_list; - struct device *dev; void __iomem *base; - phys_addr_t base_phys; - dma_addr_t base_dma; struct clk *core_clk; struct clk *aon_clk; + struct nandc_regs *regs; + struct bam_transaction *bam_txn; + + const struct qcom_nandc_props *props; + + struct nand_controller controller; + struct list_head host_list; + union { /* will be used only by QPIC for BAM DMA */ struct { @@ -400,64 +416,89 @@ struct qcom_nand_controller { }; struct list_head desc_list; - struct bam_transaction *bam_txn; u8 *data_buffer; + __le32 *reg_read_buf; + + phys_addr_t base_phys; + dma_addr_t base_dma; + dma_addr_t reg_read_dma; + int buf_size; int buf_count; int buf_start; unsigned int max_cwperpage; - __le32 *reg_read_buf; - dma_addr_t reg_read_dma; int reg_read_pos; - struct nandc_regs *regs; - u32 cmd1, vld; - const struct qcom_nandc_props *props; +}; + +/* + * NAND special boot partitions + * + * @page_offset: offset of the partition where spare data is not protected + * by ECC (value in pages) + * @page_offset: size of the partition where spare data is not protected + * by ECC (value in pages) + */ +struct qcom_nand_boot_partition { + u32 page_offset; + u32 page_size; }; /* * NAND chip structure * + * @boot_partitions: array of boot partitions where offset and size of the + * boot partitions are stored + * * @chip: base NAND chip structure * @node: list node to add itself to host_list in * qcom_nand_controller * + * @nr_boot_partitions: count of the boot partitions where spare data is not + * protected by ECC + * * @cs: chip select value for this chip * @cw_size: the number of bytes in a single step/codeword * of a page, consisting of all data, ecc, spare * and reserved bytes * @cw_data: the number of bytes within a codeword protected * by ECC - * @use_ecc: request the controller to use ECC for the - * upcoming read/write - * @bch_enabled: flag to tell whether BCH ECC mode is used * @ecc_bytes_hw: ECC bytes used by controller hardware for this * chip - * @status: value to be returned if NAND_CMD_STATUS command - * is executed + * * @last_command: keeps track of last command on this chip. used * for reading correct status * * @cfg0, cfg1, cfg0_raw..: NANDc register configurations needed for * ecc/non-ecc mode for the current nand flash * device + * + * @status: value to be returned if NAND_CMD_STATUS command + * is executed + * @codeword_fixup: keep track of the current layout used by + * the driver for read/write operation. + * @use_ecc: request the controller to use ECC for the + * upcoming read/write + * @bch_enabled: flag to tell whether BCH ECC mode is used */ struct qcom_nand_host { + struct qcom_nand_boot_partition *boot_partitions; + struct nand_chip chip; struct list_head node; + int nr_boot_partitions; + int cs; int cw_size; int cw_data; - bool use_ecc; - bool bch_enabled; int ecc_bytes_hw; int spare_bytes; int bbm_size; - u8 status; + int last_command; u32 cfg0, cfg1; @@ -466,23 +507,30 @@ struct qcom_nand_host { u32 ecc_bch_cfg; u32 clrflashstatus; u32 clrreadstatus; + + u8 status; + bool codeword_fixup; + bool use_ecc; + bool bch_enabled; }; /* * This data type corresponds to the NAND controller properties which varies * among different NAND controllers. * @ecc_modes - ecc mode for NAND + * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset * @is_bam - whether NAND controller is using BAM * @is_qpic - whether NAND CTRL is part of qpic IP * @qpic_v2 - flag to indicate QPIC IP version 2 - * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset + * @use_codeword_fixup - whether NAND has different layout for boot partitions */ struct qcom_nandc_props { u32 ecc_modes; + u32 dev_cmd_reg_start; bool is_bam; bool is_qpic; bool qpic_v2; - u32 dev_cmd_reg_start; + bool use_codeword_fixup; }; /* Frees the BAM transaction memory */ @@ -1701,7 +1749,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip, data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1); oob_size1 = host->bbm_size; - if (qcom_nandc_is_last_cw(ecc, cw)) { + if (qcom_nandc_is_last_cw(ecc, cw) && !host->codeword_fixup) { data_size2 = ecc->size - data_size1 - ((ecc->steps - 1) * 4); oob_size2 = (ecc->steps * 4) + host->ecc_bytes_hw + @@ -1782,7 +1830,7 @@ check_for_erased_page(struct qcom_nand_host *host, u8 *data_buf, } for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) { - if (qcom_nandc_is_last_cw(ecc, cw)) { + if (qcom_nandc_is_last_cw(ecc, cw) && !host->codeword_fixup) { data_size = ecc->size - ((ecc->steps - 1) * 4); oob_size = (ecc->steps * 4) + host->ecc_bytes_hw; } else { @@ -1940,7 +1988,7 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf, for (i = 0; i < ecc->steps; i++) { int data_size, oob_size; - if (qcom_nandc_is_last_cw(ecc, i)) { + if (qcom_nandc_is_last_cw(ecc, i) && !host->codeword_fixup) { data_size = ecc->size - ((ecc->steps - 1) << 2); oob_size = (ecc->steps << 2) + host->ecc_bytes_hw + host->spare_bytes; @@ -2037,6 +2085,69 @@ static int copy_last_cw(struct qcom_nand_host *host, int page) return ret; } +static bool qcom_nandc_is_boot_partition(struct qcom_nand_host *host, int page) +{ + struct qcom_nand_boot_partition *boot_partition; + u32 start, end; + int i; + + /* + * Since the frequent access will be to the non-boot partitions like rootfs, + * optimize the page check by: + * + * 1. Checking if the page lies after the last boot partition. + * 2. Checking from the boot partition end. + */ + + /* First check the last boot partition */ + boot_partition = &host->boot_partitions[host->nr_boot_partitions - 1]; + start = boot_partition->page_offset; + end = start + boot_partition->page_size; + + /* Page is after the last boot partition end. This is NOT a boot partition */ + if (page > end) + return false; + + /* Actually check if it's a boot partition */ + if (page < end && page >= start) + return true; + + /* Check the other boot partitions starting from the second-last partition */ + for (i = host->nr_boot_partitions - 2; i >= 0; i--) { + boot_partition = &host->boot_partitions[i]; + start = boot_partition->page_offset; + end = start + boot_partition->page_size; + + if (page < end && page >= start) + return true; + } + + return false; +} + +static void qcom_nandc_codeword_fixup(struct qcom_nand_host *host, int page) +{ + bool codeword_fixup = qcom_nandc_is_boot_partition(host, page); + + /* Skip conf write if we are already in the correct mode */ + if (codeword_fixup == host->codeword_fixup) + return; + + host->codeword_fixup = codeword_fixup; + + host->cw_data = codeword_fixup ? 512 : 516; + host->spare_bytes = host->cw_size - host->ecc_bytes_hw - + host->bbm_size - host->cw_data; + + host->cfg0 &= ~(SPARE_SIZE_BYTES_MASK | UD_SIZE_BYTES_MASK); + host->cfg0 |= host->spare_bytes << SPARE_SIZE_BYTES | + host->cw_data << UD_SIZE_BYTES; + + host->ecc_bch_cfg &= ~ECC_NUM_DATA_BYTES_MASK; + host->ecc_bch_cfg |= host->cw_data << ECC_NUM_DATA_BYTES; + host->ecc_buf_cfg = (host->cw_data - 1) << NUM_STEPS; +} + /* implements ecc->read_page() */ static int qcom_nandc_read_page(struct nand_chip *chip, uint8_t *buf, int oob_required, int page) @@ -2045,6 +2156,9 @@ static int qcom_nandc_read_page(struct nand_chip *chip, uint8_t *buf, struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); u8 *data_buf, *oob_buf = NULL; + if (host->nr_boot_partitions) + qcom_nandc_codeword_fixup(host, page); + nand_read_page_op(chip, page, 0, NULL, 0); data_buf = buf; oob_buf = oob_required ? chip->oob_poi : NULL; @@ -2064,6 +2178,9 @@ static int qcom_nandc_read_page_raw(struct nand_chip *chip, uint8_t *buf, int cw, ret; u8 *data_buf = buf, *oob_buf = chip->oob_poi; + if (host->nr_boot_partitions) + qcom_nandc_codeword_fixup(host, page); + for (cw = 0; cw < ecc->steps; cw++) { ret = qcom_nandc_read_cw_raw(mtd, chip, data_buf, oob_buf, page, cw); @@ -2084,6 +2201,9 @@ static int qcom_nandc_read_oob(struct nand_chip *chip, int page) struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); struct nand_ecc_ctrl *ecc = &chip->ecc; + if (host->nr_boot_partitions) + qcom_nandc_codeword_fixup(host, page); + clear_read_regs(nandc); clear_bam_transaction(nandc); @@ -2104,6 +2224,9 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf, u8 *data_buf, *oob_buf; int i, ret; + if (host->nr_boot_partitions) + qcom_nandc_codeword_fixup(host, page); + nand_prog_page_begin_op(chip, page, 0, NULL, 0); clear_read_regs(nandc); @@ -2119,7 +2242,7 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf, for (i = 0; i < ecc->steps; i++) { int data_size, oob_size; - if (qcom_nandc_is_last_cw(ecc, i)) { + if (qcom_nandc_is_last_cw(ecc, i) && !host->codeword_fixup) { data_size = ecc->size - ((ecc->steps - 1) << 2); oob_size = (ecc->steps << 2) + host->ecc_bytes_hw + host->spare_bytes; @@ -2176,6 +2299,9 @@ static int qcom_nandc_write_page_raw(struct nand_chip *chip, u8 *data_buf, *oob_buf; int i, ret; + if (host->nr_boot_partitions) + qcom_nandc_codeword_fixup(host, page); + nand_prog_page_begin_op(chip, page, 0, NULL, 0); clear_read_regs(nandc); clear_bam_transaction(nandc); @@ -2194,7 +2320,7 @@ static int qcom_nandc_write_page_raw(struct nand_chip *chip, data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1); oob_size1 = host->bbm_size; - if (qcom_nandc_is_last_cw(ecc, i)) { + if (qcom_nandc_is_last_cw(ecc, i) && !host->codeword_fixup) { data_size2 = ecc->size - data_size1 - ((ecc->steps - 1) << 2); oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw + @@ -2254,6 +2380,9 @@ static int qcom_nandc_write_oob(struct nand_chip *chip, int page) int data_size, oob_size; int ret; + if (host->nr_boot_partitions) + qcom_nandc_codeword_fixup(host, page); + host->use_ecc = true; clear_bam_transaction(nandc); @@ -2915,6 +3044,74 @@ static int qcom_nandc_setup(struct qcom_nand_controller *nandc) static const char * const probes[] = { "cmdlinepart", "ofpart", "qcomsmem", NULL }; +static int qcom_nand_host_parse_boot_partitions(struct qcom_nand_controller *nandc, + struct qcom_nand_host *host, + struct device_node *dn) +{ + struct nand_chip *chip = &host->chip; + struct mtd_info *mtd = nand_to_mtd(chip); + struct qcom_nand_boot_partition *boot_partition; + struct device *dev = nandc->dev; + int partitions_count, i, j, ret; + + if (!of_find_property(dn, "qcom,boot-partitions", NULL)) + return 0; + + partitions_count = of_property_count_u32_elems(dn, "qcom,boot-partitions"); + if (partitions_count <= 0) { + dev_err(dev, "Error parsing boot partition\n"); + return partitions_count ? partitions_count : -EINVAL; + } + + host->nr_boot_partitions = partitions_count / 2; + host->boot_partitions = devm_kcalloc(dev, host->nr_boot_partitions, + sizeof(*host->boot_partitions), GFP_KERNEL); + if (!host->boot_partitions) { + host->nr_boot_partitions = 0; + return -ENOMEM; + } + + for (i = 0, j = 0; i < host->nr_boot_partitions; i++, j += 2) { + boot_partition = &host->boot_partitions[i]; + + ret = of_property_read_u32_index(dn, "qcom,boot-partitions", j, + &boot_partition->page_offset); + if (ret) { + dev_err(dev, "Error parsing boot partition offset at index %d\n", i); + host->nr_boot_partitions = 0; + return ret; + } + + if (boot_partition->page_offset % mtd->writesize) { + dev_err(dev, "Boot partition offset not multiple of writesize at index %i\n", + i); + host->nr_boot_partitions = 0; + return -EINVAL; + } + /* Convert offset to nand pages */ + boot_partition->page_offset /= mtd->writesize; + + ret = of_property_read_u32_index(dn, "qcom,boot-partitions", j + 1, + &boot_partition->page_size); + if (ret) { + dev_err(dev, "Error parsing boot partition size at index %d\n", i); + host->nr_boot_partitions = 0; + return ret; + } + + if (boot_partition->page_size % mtd->writesize) { + dev_err(dev, "Boot partition size not multiple of writesize at index %i\n", + i); + host->nr_boot_partitions = 0; + return -EINVAL; + } + /* Convert size to nand pages */ + boot_partition->page_size /= mtd->writesize; + } + + return 0; +} + static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc, struct qcom_nand_host *host, struct device_node *dn) @@ -2972,6 +3169,14 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc, if (ret) nand_cleanup(chip); + if (nandc->props->use_codeword_fixup) { + ret = qcom_nand_host_parse_boot_partitions(nandc, host, dn); + if (ret) { + nand_cleanup(chip); + return ret; + } + } + return ret; } @@ -3137,6 +3342,7 @@ static int qcom_nandc_remove(struct platform_device *pdev) static const struct qcom_nandc_props ipq806x_nandc_props = { .ecc_modes = (ECC_RS_4BIT | ECC_BCH_8BIT), .is_bam = false, + .use_codeword_fixup = true, .dev_cmd_reg_start = 0x0, }; diff --git a/drivers/mtd/nand/raw/sm_common.c b/drivers/mtd/nand/raw/sm_common.c index ba24cb36d0b9..b2b42dd1a2de 100644 --- a/drivers/mtd/nand/raw/sm_common.c +++ b/drivers/mtd/nand/raw/sm_common.c @@ -52,7 +52,7 @@ static const struct mtd_ooblayout_ops oob_sm_ops = { .free = oob_sm_ooblayout_free, }; -/* NOTE: This layout is is not compatabable with SmartMedia, */ +/* NOTE: This layout is not compatabable with SmartMedia, */ /* because the 256 byte devices have page depenent oob layout */ /* However it does preserve the bad block markers */ /* If you use smftl, it will bypass this and work correctly */ diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c index b36e5260ae27..e12f9f580a15 100644 --- a/drivers/mtd/nand/raw/tegra_nand.c +++ b/drivers/mtd/nand/raw/tegra_nand.c @@ -1223,11 +1223,8 @@ static int tegra_nand_remove(struct platform_device *pdev) struct tegra_nand_controller *ctrl = platform_get_drvdata(pdev); struct nand_chip *chip = ctrl->chip; struct mtd_info *mtd = nand_to_mtd(chip); - int ret; - ret = mtd_device_unregister(mtd); - if (ret) - return ret; + WARN_ON(mtd_device_unregister(mtd)); nand_cleanup(chip); diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile index 80dabe6ff0f3..b520fe634041 100644 --- a/drivers/mtd/nand/spi/Makefile +++ b/drivers/mtd/nand/spi/Makefile @@ -1,3 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 -spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o +spinand-objs := core.o ato.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o obj-$(CONFIG_MTD_SPI_NAND) += spinand.o diff --git a/drivers/mtd/nand/spi/ato.c b/drivers/mtd/nand/spi/ato.c new file mode 100644 index 000000000000..82b377c06812 --- /dev/null +++ b/drivers/mtd/nand/spi/ato.c @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Aidan MacDonald + * + * Author: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/mtd/spinand.h> + + +#define SPINAND_MFR_ATO 0x9b + + +static SPINAND_OP_VARIANTS(read_cache_variants, + SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0)); + +static SPINAND_OP_VARIANTS(write_cache_variants, + SPINAND_PROG_LOAD_X4(true, 0, NULL, 0), + SPINAND_PROG_LOAD(true, 0, NULL, 0)); + +static SPINAND_OP_VARIANTS(update_cache_variants, + SPINAND_PROG_LOAD_X4(false, 0, NULL, 0), + SPINAND_PROG_LOAD(false, 0, NULL, 0)); + + +static int ato25d1ga_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *region) +{ + if (section > 3) + return -ERANGE; + + region->offset = (16 * section) + 8; + region->length = 8; + return 0; +} + +static int ato25d1ga_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *region) +{ + if (section > 3) + return -ERANGE; + + if (section) { + region->offset = (16 * section); + region->length = 8; + } else { + /* first byte of section 0 is reserved for the BBM */ + region->offset = 1; + region->length = 7; + } + + return 0; +} + +static const struct mtd_ooblayout_ops ato25d1ga_ooblayout = { + .ecc = ato25d1ga_ooblayout_ecc, + .free = ato25d1ga_ooblayout_free, +}; + + +static const struct spinand_info ato_spinand_table[] = { + SPINAND_INFO("ATO25D1GA", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x12), + NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1), + NAND_ECCREQ(1, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + SPINAND_HAS_QE_BIT, + SPINAND_ECCINFO(&ato25d1ga_ooblayout, NULL)), +}; + +static const struct spinand_manufacturer_ops ato_spinand_manuf_ops = { +}; + +const struct spinand_manufacturer ato_spinand_manufacturer = { + .id = SPINAND_MFR_ATO, + .name = "ATO", + .chips = ato_spinand_table, + .nchips = ARRAY_SIZE(ato_spinand_table), + .ops = &ato_spinand_manuf_ops, +}; diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c index d5b685d1605e..9d73910a7ae8 100644 --- a/drivers/mtd/nand/spi/core.c +++ b/drivers/mtd/nand/spi/core.c @@ -927,6 +927,7 @@ static const struct nand_ops spinand_ops = { }; static const struct spinand_manufacturer *spinand_manufacturers[] = { + &ato_spinand_manufacturer, &gigadevice_spinand_manufacturer, ¯onix_spinand_manufacturer, µn_spinand_manufacturer, diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig index 23763d16e4f9..b43df73927a0 100644 --- a/drivers/mtd/parsers/Kconfig +++ b/drivers/mtd/parsers/Kconfig @@ -186,3 +186,12 @@ config MTD_QCOMSMEM_PARTS help This provides support for parsing partitions from Shared Memory (SMEM) for NAND and SPI flash on Qualcomm platforms. + +config MTD_SERCOMM_PARTS + tristate "Sercomm partition table parser" + depends on MTD && RALINK + help + This provides partitions table parser for devices with Sercomm + partition map. This partition table contains real partition + offsets, which may differ from device to device depending on the + number and location of bad blocks on NAND. diff --git a/drivers/mtd/parsers/Makefile b/drivers/mtd/parsers/Makefile index 2e98aa048278..2fcf0ab9e7da 100644 --- a/drivers/mtd/parsers/Makefile +++ b/drivers/mtd/parsers/Makefile @@ -10,6 +10,7 @@ ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)+= ofpart_linksys_ns.o obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o obj-$(CONFIG_MTD_AFS_PARTS) += afs.o obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o +obj-$(CONFIG_MTD_SERCOMM_PARTS) += scpart.o obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o obj-$(CONFIG_MTD_QCOMSMEM_PARTS) += qcomsmempart.o diff --git a/drivers/mtd/parsers/ofpart_bcm4908.c b/drivers/mtd/parsers/ofpart_bcm4908.c index 0eddef4c198e..bb072a0940e4 100644 --- a/drivers/mtd/parsers/ofpart_bcm4908.c +++ b/drivers/mtd/parsers/ofpart_bcm4908.c @@ -35,12 +35,15 @@ static long long bcm4908_partitions_fw_offset(void) err = kstrtoul(s + len + 1, 0, &offset); if (err) { pr_err("failed to parse %s\n", s + len + 1); + of_node_put(root); return err; } + of_node_put(root); return offset << 10; } + of_node_put(root); return -ENOENT; } diff --git a/drivers/mtd/parsers/redboot.c b/drivers/mtd/parsers/redboot.c index feb44a573d44..a16b42a88581 100644 --- a/drivers/mtd/parsers/redboot.c +++ b/drivers/mtd/parsers/redboot.c @@ -58,6 +58,7 @@ static void parse_redboot_of(struct mtd_info *master) return; ret = of_property_read_u32(npart, "fis-index-block", &dirblock); + of_node_put(npart); if (ret) return; diff --git a/drivers/mtd/parsers/scpart.c b/drivers/mtd/parsers/scpart.c new file mode 100644 index 000000000000..02601bb33de4 --- /dev/null +++ b/drivers/mtd/parsers/scpart.c @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * drivers/mtd/scpart.c: Sercomm Partition Parser + * + * Copyright (C) 2018 NOGUCHI Hiroshi + * Copyright (C) 2022 Mikhail Zhilkin + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/module.h> + +#define MOD_NAME "scpart" + +#ifdef pr_fmt +#undef pr_fmt +#endif + +#define pr_fmt(fmt) MOD_NAME ": " fmt + +#define ID_ALREADY_FOUND 0xffffffffUL + +#define MAP_OFFS_IN_BLK 0x800 +#define MAP_MIRROR_NUM 2 + +static const char sc_part_magic[] = { + 'S', 'C', 'F', 'L', 'M', 'A', 'P', 'O', 'K', '\0', +}; +#define PART_MAGIC_LEN sizeof(sc_part_magic) + +/* assumes that all fields are set by CPU native endian */ +struct sc_part_desc { + uint32_t part_id; + uint32_t part_offs; + uint32_t part_bytes; +}; + +static uint32_t scpart_desc_is_valid(struct sc_part_desc *pdesc) +{ + return ((pdesc->part_id != 0xffffffffUL) && + (pdesc->part_offs != 0xffffffffUL) && + (pdesc->part_bytes != 0xffffffffUL)); +} + +static int scpart_scan_partmap(struct mtd_info *master, loff_t partmap_offs, + struct sc_part_desc **ppdesc) +{ + int cnt = 0; + int res = 0; + int res2; + loff_t offs; + size_t retlen; + struct sc_part_desc *pdesc = NULL; + struct sc_part_desc *tmpdesc; + uint8_t *buf; + + buf = kzalloc(master->erasesize, GFP_KERNEL); + if (!buf) { + res = -ENOMEM; + goto out; + } + + res2 = mtd_read(master, partmap_offs, master->erasesize, &retlen, buf); + if (res2 || retlen != master->erasesize) { + res = -EIO; + goto free; + } + + for (offs = MAP_OFFS_IN_BLK; + offs < master->erasesize - sizeof(*tmpdesc); + offs += sizeof(*tmpdesc)) { + tmpdesc = (struct sc_part_desc *)&buf[offs]; + if (!scpart_desc_is_valid(tmpdesc)) + break; + cnt++; + } + + if (cnt > 0) { + int bytes = cnt * sizeof(*pdesc); + + pdesc = kcalloc(cnt, sizeof(*pdesc), GFP_KERNEL); + if (!pdesc) { + res = -ENOMEM; + goto free; + } + memcpy(pdesc, &(buf[MAP_OFFS_IN_BLK]), bytes); + + *ppdesc = pdesc; + res = cnt; + } + +free: + kfree(buf); + +out: + return res; +} + +static int scpart_find_partmap(struct mtd_info *master, + struct sc_part_desc **ppdesc) +{ + int magic_found = 0; + int res = 0; + int res2; + loff_t offs = 0; + size_t retlen; + uint8_t rdbuf[PART_MAGIC_LEN]; + + while ((magic_found < MAP_MIRROR_NUM) && + (offs < master->size) && + !mtd_block_isbad(master, offs)) { + res2 = mtd_read(master, offs, PART_MAGIC_LEN, &retlen, rdbuf); + if (res2 || retlen != PART_MAGIC_LEN) { + res = -EIO; + goto out; + } + if (!memcmp(rdbuf, sc_part_magic, PART_MAGIC_LEN)) { + pr_debug("Signature found at 0x%llx\n", offs); + magic_found++; + res = scpart_scan_partmap(master, offs, ppdesc); + if (res > 0) + goto out; + } + offs += master->erasesize; + } + +out: + if (res > 0) + pr_info("Valid 'SC PART MAP' (%d partitions) found at 0x%llx\n", res, offs); + else + pr_info("No valid 'SC PART MAP' was found\n"); + + return res; +} + +static int scpart_parse(struct mtd_info *master, + const struct mtd_partition **pparts, + struct mtd_part_parser_data *data) +{ + const char *partname; + int n; + int nr_scparts; + int nr_parts = 0; + int res = 0; + struct sc_part_desc *scpart_map = NULL; + struct mtd_partition *parts = NULL; + struct device_node *mtd_node; + struct device_node *ofpart_node; + struct device_node *pp; + + mtd_node = mtd_get_of_node(master); + if (!mtd_node) { + res = -ENOENT; + goto out; + } + + ofpart_node = of_get_child_by_name(mtd_node, "partitions"); + if (!ofpart_node) { + pr_info("%s: 'partitions' subnode not found on %pOF.\n", + master->name, mtd_node); + res = -ENOENT; + goto out; + } + + nr_scparts = scpart_find_partmap(master, &scpart_map); + if (nr_scparts <= 0) { + pr_info("No any partitions was found in 'SC PART MAP'.\n"); + res = -ENOENT; + goto free; + } + + parts = kcalloc(of_get_child_count(ofpart_node), sizeof(*parts), + GFP_KERNEL); + if (!parts) { + res = -ENOMEM; + goto free; + } + + for_each_child_of_node(ofpart_node, pp) { + u32 scpart_id; + + if (of_property_read_u32(pp, "sercomm,scpart-id", &scpart_id)) + continue; + + for (n = 0 ; n < nr_scparts ; n++) + if ((scpart_map[n].part_id != ID_ALREADY_FOUND) && + (scpart_id == scpart_map[n].part_id)) + break; + if (n >= nr_scparts) + /* not match */ + continue; + + /* add the partition found in OF into MTD partition array */ + parts[nr_parts].offset = scpart_map[n].part_offs; + parts[nr_parts].size = scpart_map[n].part_bytes; + parts[nr_parts].of_node = pp; + + if (!of_property_read_string(pp, "label", &partname)) + parts[nr_parts].name = partname; + if (of_property_read_bool(pp, "read-only")) + parts[nr_parts].mask_flags |= MTD_WRITEABLE; + if (of_property_read_bool(pp, "lock")) + parts[nr_parts].mask_flags |= MTD_POWERUP_LOCK; + + /* mark as 'done' */ + scpart_map[n].part_id = ID_ALREADY_FOUND; + + nr_parts++; + } + + if (nr_parts > 0) { + *pparts = parts; + res = nr_parts; + } else + pr_info("No partition in OF matches partition ID with 'SC PART MAP'.\n"); + + of_node_put(pp); + +free: + of_node_put(ofpart_node); + kfree(scpart_map); + if (res <= 0) + kfree(parts); + +out: + return res; +} + +static const struct of_device_id scpart_parser_of_match_table[] = { + { .compatible = "sercomm,sc-partitions" }, + {}, +}; +MODULE_DEVICE_TABLE(of, scpart_parser_of_match_table); + +static struct mtd_part_parser scpart_parser = { + .parse_fn = scpart_parse, + .name = "scpart", + .of_match_table = scpart_parser_of_match_table, +}; +module_mtd_part_parser(scpart_parser); + +/* mtd parsers will request the module by parser name */ +MODULE_ALIAS("scpart"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("NOGUCHI Hiroshi <drvlabo@gmail.com>"); +MODULE_AUTHOR("Mikhail Zhilkin <csharper2005@gmail.com>"); +MODULE_DESCRIPTION("Sercomm partition parser"); diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c index 0cff2cda1b5a..7f955fade838 100644 --- a/drivers/mtd/sm_ftl.c +++ b/drivers/mtd/sm_ftl.c @@ -1111,9 +1111,9 @@ static void sm_release(struct mtd_blktrans_dev *dev) { struct sm_ftl *ftl = dev->priv; - mutex_lock(&ftl->mutex); del_timer_sync(&ftl->timer); cancel_work_sync(&ftl->flush_work); + mutex_lock(&ftl->mutex); sm_cache_flush(ftl); mutex_unlock(&ftl->mutex); } diff --git a/drivers/mtd/spi-nor/controllers/hisi-sfc.c b/drivers/mtd/spi-nor/controllers/hisi-sfc.c index 94a969185ceb..5070d72835ec 100644 --- a/drivers/mtd/spi-nor/controllers/hisi-sfc.c +++ b/drivers/mtd/spi-nor/controllers/hisi-sfc.c @@ -237,7 +237,7 @@ static int hisi_spi_nor_dma_transfer(struct spi_nor *nor, loff_t start_off, reg = readl(host->regbase + FMC_CFG); reg &= ~(FMC_CFG_OP_MODE_MASK | SPI_NOR_ADDR_MODE_MASK); reg |= FMC_CFG_OP_MODE_NORMAL; - reg |= (nor->addr_width == 4) ? SPI_NOR_ADDR_MODE_4BYTES + reg |= (nor->addr_nbytes == 4) ? SPI_NOR_ADDR_MODE_4BYTES : SPI_NOR_ADDR_MODE_3BYTES; writel(reg, host->regbase + FMC_CFG); diff --git a/drivers/mtd/spi-nor/controllers/nxp-spifi.c b/drivers/mtd/spi-nor/controllers/nxp-spifi.c index 9032b9ab2eaf..ab3990e6ac25 100644 --- a/drivers/mtd/spi-nor/controllers/nxp-spifi.c +++ b/drivers/mtd/spi-nor/controllers/nxp-spifi.c @@ -203,7 +203,7 @@ static ssize_t nxp_spifi_write(struct spi_nor *nor, loff_t to, size_t len, SPIFI_CMD_DATALEN(len) | SPIFI_CMD_FIELDFORM_ALL_SERIAL | SPIFI_CMD_OPCODE(nor->program_opcode) | - SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1); + SPIFI_CMD_FRAMEFORM(spifi->nor.addr_nbytes + 1); writel(cmd, spifi->io_base + SPIFI_CMD); for (i = 0; i < len; i++) @@ -230,7 +230,7 @@ static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs) cmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL | SPIFI_CMD_OPCODE(nor->erase_opcode) | - SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1); + SPIFI_CMD_FRAMEFORM(spifi->nor.addr_nbytes + 1); writel(cmd, spifi->io_base + SPIFI_CMD); return nxp_spifi_wait_for_cmd(spifi); @@ -252,12 +252,12 @@ static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi) } /* Memory mode supports address length between 1 and 4 */ - if (spifi->nor.addr_width < 1 || spifi->nor.addr_width > 4) + if (spifi->nor.addr_nbytes < 1 || spifi->nor.addr_nbytes > 4) return -EINVAL; spifi->mcmd |= SPIFI_CMD_OPCODE(spifi->nor.read_opcode) | SPIFI_CMD_INTLEN(spifi->nor.read_dummy / 8) | - SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1); + SPIFI_CMD_FRAMEFORM(spifi->nor.addr_nbytes + 1); return 0; } diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c index 502967c76c5f..f2c64006f8d7 100644 --- a/drivers/mtd/spi-nor/core.c +++ b/drivers/mtd/spi-nor/core.c @@ -38,7 +38,7 @@ */ #define CHIP_ERASE_2MB_READY_WAIT_JIFFIES (40UL * HZ) -#define SPI_NOR_MAX_ADDR_WIDTH 4 +#define SPI_NOR_MAX_ADDR_NBYTES 4 #define SPI_NOR_SRST_SLEEP_MIN 200 #define SPI_NOR_SRST_SLEEP_MAX 400 @@ -177,7 +177,7 @@ int spi_nor_controller_ops_write_reg(struct spi_nor *nor, u8 opcode, static int spi_nor_controller_ops_erase(struct spi_nor *nor, loff_t offs) { - if (spi_nor_protocol_is_dtr(nor->write_proto)) + if (spi_nor_protocol_is_dtr(nor->reg_proto)) return -EOPNOTSUPP; return nor->controller_ops->erase(nor, offs); @@ -198,7 +198,7 @@ static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t from, { struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 0), - SPI_MEM_OP_ADDR(nor->addr_width, from, 0), + SPI_MEM_OP_ADDR(nor->addr_nbytes, from, 0), SPI_MEM_OP_DUMMY(nor->read_dummy, 0), SPI_MEM_OP_DATA_IN(len, buf, 0)); bool usebouncebuf; @@ -262,7 +262,7 @@ static ssize_t spi_nor_spimem_write_data(struct spi_nor *nor, loff_t to, { struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 0), - SPI_MEM_OP_ADDR(nor->addr_width, to, 0), + SPI_MEM_OP_ADDR(nor->addr_nbytes, to, 0), SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_DATA_OUT(len, buf, 0)); ssize_t nbytes; @@ -972,7 +972,7 @@ static int spi_nor_erase_chip(struct spi_nor *nor) if (nor->spimem) { struct spi_mem_op op = SPI_NOR_CHIP_ERASE_OP; - spi_nor_spimem_setup_op(nor, &op, nor->write_proto); + spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); ret = spi_mem_exec_op(nor->spimem, &op); } else { @@ -1113,9 +1113,9 @@ int spi_nor_erase_sector(struct spi_nor *nor, u32 addr) if (nor->spimem) { struct spi_mem_op op = SPI_NOR_SECTOR_ERASE_OP(nor->erase_opcode, - nor->addr_width, addr); + nor->addr_nbytes, addr); - spi_nor_spimem_setup_op(nor, &op, nor->write_proto); + spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); return spi_mem_exec_op(nor->spimem, &op); } else if (nor->controller_ops->erase) { @@ -1126,13 +1126,13 @@ int spi_nor_erase_sector(struct spi_nor *nor, u32 addr) * Default implementation, if driver doesn't have a specialized HW * control */ - for (i = nor->addr_width - 1; i >= 0; i--) { + for (i = nor->addr_nbytes - 1; i >= 0; i--) { nor->bouncebuf[i] = addr & 0xff; addr >>= 8; } return spi_nor_controller_ops_write_reg(nor, nor->erase_opcode, - nor->bouncebuf, nor->addr_width); + nor->bouncebuf, nor->addr_nbytes); } /** @@ -2249,43 +2249,43 @@ static int spi_nor_default_setup(struct spi_nor *nor, return 0; } -static int spi_nor_set_addr_width(struct spi_nor *nor) +static int spi_nor_set_addr_nbytes(struct spi_nor *nor) { - if (nor->addr_width) { - /* already configured from SFDP */ + if (nor->params->addr_nbytes) { + nor->addr_nbytes = nor->params->addr_nbytes; } else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR) { /* * In 8D-8D-8D mode, one byte takes half a cycle to transfer. So - * in this protocol an odd address width cannot be used because + * in this protocol an odd addr_nbytes cannot be used because * then the address phase would only span a cycle and a half. * Half a cycle would be left over. We would then have to start * the dummy phase in the middle of a cycle and so too the data * phase, and we will end the transaction with half a cycle left * over. * - * Force all 8D-8D-8D flashes to use an address width of 4 to + * Force all 8D-8D-8D flashes to use an addr_nbytes of 4 to * avoid this situation. */ - nor->addr_width = 4; - } else if (nor->info->addr_width) { - nor->addr_width = nor->info->addr_width; + nor->addr_nbytes = 4; + } else if (nor->info->addr_nbytes) { + nor->addr_nbytes = nor->info->addr_nbytes; } else { - nor->addr_width = 3; + nor->addr_nbytes = 3; } - if (nor->addr_width == 3 && nor->params->size > 0x1000000) { + if (nor->addr_nbytes == 3 && nor->params->size > 0x1000000) { /* enable 4-byte addressing if the device exceeds 16MiB */ - nor->addr_width = 4; + nor->addr_nbytes = 4; } - if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) { - dev_dbg(nor->dev, "address width is too large: %u\n", - nor->addr_width); + if (nor->addr_nbytes > SPI_NOR_MAX_ADDR_NBYTES) { + dev_dbg(nor->dev, "The number of address bytes is too large: %u\n", + nor->addr_nbytes); return -EINVAL; } /* Set 4byte opcodes when possible. */ - if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES && + if (nor->addr_nbytes == 4 && nor->flags & SNOR_F_4B_OPCODES && !(nor->flags & SNOR_F_HAS_4BAIT)) spi_nor_set_4byte_opcodes(nor); @@ -2304,7 +2304,7 @@ static int spi_nor_setup(struct spi_nor *nor, if (ret) return ret; - return spi_nor_set_addr_width(nor); + return spi_nor_set_addr_nbytes(nor); } /** @@ -2382,12 +2382,7 @@ static void spi_nor_no_sfdp_init_params(struct spi_nor *nor) */ erase_mask = 0; i = 0; - if (no_sfdp_flags & SECT_4K_PMC) { - erase_mask |= BIT(i); - spi_nor_set_erase_type(&map->erase_type[i], 4096u, - SPINOR_OP_BE_4K_PMC); - i++; - } else if (no_sfdp_flags & SECT_4K) { + if (no_sfdp_flags & SECT_4K) { erase_mask |= BIT(i); spi_nor_set_erase_type(&map->erase_type[i], 4096u, SPINOR_OP_BE_4K); @@ -2497,7 +2492,6 @@ static void spi_nor_sfdp_init_params_deprecated(struct spi_nor *nor) if (spi_nor_parse_sfdp(nor)) { memcpy(nor->params, &sfdp_params, sizeof(*nor->params)); - nor->addr_width = 0; nor->flags &= ~SNOR_F_4B_OPCODES; } } @@ -2718,7 +2712,7 @@ static int spi_nor_init(struct spi_nor *nor) nor->flags & SNOR_F_SWP_IS_VOLATILE)) spi_nor_try_unlock_all(nor); - if (nor->addr_width == 4 && + if (nor->addr_nbytes == 4 && nor->read_proto != SNOR_PROTO_8_8_8_DTR && !(nor->flags & SNOR_F_4B_OPCODES)) { /* @@ -2730,7 +2724,7 @@ static int spi_nor_init(struct spi_nor *nor) */ WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET, "enabling reset hack; may not recover from unexpected reboots\n"); - nor->params->set_4byte_addr_mode(nor, true); + return nor->params->set_4byte_addr_mode(nor, true); } return 0; @@ -2845,7 +2839,7 @@ static void spi_nor_put_device(struct mtd_info *mtd) void spi_nor_restore(struct spi_nor *nor) { /* restore the addressing mode */ - if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES) && + if (nor->addr_nbytes == 4 && !(nor->flags & SNOR_F_4B_OPCODES) && nor->flags & SNOR_F_BROKEN_RESET) nor->params->set_4byte_addr_mode(nor, false); @@ -2989,7 +2983,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, * - select op codes for (Fast) Read, Page Program and Sector Erase. * - set the number of dummy cycles (mode cycles + wait states). * - set the SPI protocols for register and memory accesses. - * - set the address width. + * - set the number of address bytes. */ ret = spi_nor_setup(nor, hwcaps); if (ret) @@ -3030,7 +3024,7 @@ static int spi_nor_create_read_dirmap(struct spi_nor *nor) { struct spi_mem_dirmap_info info = { .op_tmpl = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 0), - SPI_MEM_OP_ADDR(nor->addr_width, 0, 0), + SPI_MEM_OP_ADDR(nor->addr_nbytes, 0, 0), SPI_MEM_OP_DUMMY(nor->read_dummy, 0), SPI_MEM_OP_DATA_IN(0, NULL, 0)), .offset = 0, @@ -3061,7 +3055,7 @@ static int spi_nor_create_write_dirmap(struct spi_nor *nor) { struct spi_mem_dirmap_info info = { .op_tmpl = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 0), - SPI_MEM_OP_ADDR(nor->addr_width, 0, 0), + SPI_MEM_OP_ADDR(nor->addr_nbytes, 0, 0), SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_DATA_OUT(0, NULL, 0)), .offset = 0, diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h index 3f841ec36e56..85b0cf254e97 100644 --- a/drivers/mtd/spi-nor/core.h +++ b/drivers/mtd/spi-nor/core.h @@ -84,9 +84,9 @@ SPI_MEM_OP_NO_DUMMY, \ SPI_MEM_OP_NO_DATA) -#define SPI_NOR_SECTOR_ERASE_OP(opcode, addr_width, addr) \ +#define SPI_NOR_SECTOR_ERASE_OP(opcode, addr_nbytes, addr) \ SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0), \ - SPI_MEM_OP_ADDR(addr_width, addr, 0), \ + SPI_MEM_OP_ADDR(addr_nbytes, addr, 0), \ SPI_MEM_OP_NO_DUMMY, \ SPI_MEM_OP_NO_DATA) @@ -340,6 +340,11 @@ struct spi_nor_otp { * @writesize Minimal writable flash unit size. Defaults to 1. Set to * ECC unit size for ECC-ed flashes. * @page_size: the page size of the SPI NOR flash memory. + * @addr_nbytes: number of address bytes to send. + * @addr_mode_nbytes: number of address bytes of current address mode. Useful + * when the flash operates with 4B opcodes but needs the + * internal address mode for opcodes that don't have a 4B + * opcode correspondent. * @rdsr_dummy: dummy cycles needed for Read Status Register command * in octal DTR mode. * @rdsr_addr_nbytes: dummy address bytes needed for Read Status Register @@ -372,6 +377,8 @@ struct spi_nor_flash_parameter { u64 size; u32 writesize; u32 page_size; + u8 addr_nbytes; + u8 addr_mode_nbytes; u8 rdsr_dummy; u8 rdsr_addr_nbytes; @@ -429,7 +436,7 @@ struct spi_nor_fixups { * isn't necessarily called a "sector" by the vendor. * @n_sectors: the number of sectors. * @page_size: the flash's page size. - * @addr_width: the flash's address width. + * @addr_nbytes: number of address bytes to send. * * @parse_sfdp: true when flash supports SFDP tables. The false value has no * meaning. If one wants to skip the SFDP tables, one should @@ -457,7 +464,6 @@ struct spi_nor_fixups { * flags are used together with the SPI_NOR_SKIP_SFDP flag. * SPI_NOR_SKIP_SFDP: skip parsing of SFDP tables. * SECT_4K: SPINOR_OP_BE_4K works uniformly. - * SECT_4K_PMC: SPINOR_OP_BE_4K_PMC works uniformly. * SPI_NOR_DUAL_READ: flash supports Dual Read. * SPI_NOR_QUAD_READ: flash supports Quad Read. * SPI_NOR_OCTAL_READ: flash supports Octal Read. @@ -488,7 +494,7 @@ struct flash_info { unsigned sector_size; u16 n_sectors; u16 page_size; - u16 addr_width; + u8 addr_nbytes; bool parse_sfdp; u16 flags; @@ -505,7 +511,6 @@ struct flash_info { u8 no_sfdp_flags; #define SPI_NOR_SKIP_SFDP BIT(0) #define SECT_4K BIT(1) -#define SECT_4K_PMC BIT(2) #define SPI_NOR_DUAL_READ BIT(3) #define SPI_NOR_QUAD_READ BIT(4) #define SPI_NOR_OCTAL_READ BIT(5) @@ -550,11 +555,11 @@ struct flash_info { .n_sectors = (_n_sectors), \ .page_size = 256, \ -#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width) \ +#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_nbytes) \ .sector_size = (_sector_size), \ .n_sectors = (_n_sectors), \ .page_size = (_page_size), \ - .addr_width = (_addr_width), \ + .addr_nbytes = (_addr_nbytes), \ .flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR, \ #define OTP_INFO(_len, _n_regions, _base, _offset) \ diff --git a/drivers/mtd/spi-nor/debugfs.c b/drivers/mtd/spi-nor/debugfs.c index eaf84f7a0676..df76cb5de3f9 100644 --- a/drivers/mtd/spi-nor/debugfs.c +++ b/drivers/mtd/spi-nor/debugfs.c @@ -86,7 +86,7 @@ static int spi_nor_params_show(struct seq_file *s, void *data) seq_printf(s, "size\t\t%s\n", buf); seq_printf(s, "write size\t%u\n", params->writesize); seq_printf(s, "page size\t%u\n", params->page_size); - seq_printf(s, "address width\t%u\n", nor->addr_width); + seq_printf(s, "address nbytes\t%u\n", nor->addr_nbytes); seq_puts(s, "flags\t\t"); spi_nor_print_flags(s, nor->flags, snor_f_names, sizeof(snor_f_names)); diff --git a/drivers/mtd/spi-nor/esmt.c b/drivers/mtd/spi-nor/esmt.c index 79e2408f4998..fcc3b0e7cda9 100644 --- a/drivers/mtd/spi-nor/esmt.c +++ b/drivers/mtd/spi-nor/esmt.c @@ -13,7 +13,7 @@ static const struct flash_info esmt_nor_parts[] = { { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64) FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) NO_SFDP_FLAGS(SECT_4K) }, - { "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64) + { "f25l32qa-2s", INFO(0x8c4116, 0, 64 * 1024, 64) FLAGS(SPI_NOR_HAS_LOCK) NO_SFDP_FLAGS(SECT_4K) }, { "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128) diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c index c012bc2486e1..89a66a19d754 100644 --- a/drivers/mtd/spi-nor/issi.c +++ b/drivers/mtd/spi-nor/issi.c @@ -14,13 +14,13 @@ is25lp256_post_bfpt_fixups(struct spi_nor *nor, const struct sfdp_bfpt *bfpt) { /* - * IS25LP256 supports 4B opcodes, but the BFPT advertises a - * BFPT_DWORD1_ADDRESS_BYTES_3_ONLY address width. - * Overwrite the address width advertised by the BFPT. + * IS25LP256 supports 4B opcodes, but the BFPT advertises + * BFPT_DWORD1_ADDRESS_BYTES_3_ONLY. + * Overwrite the number of address bytes advertised by the BFPT. */ if ((bfpt->dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) == BFPT_DWORD1_ADDRESS_BYTES_3_ONLY) - nor->addr_width = 4; + nor->params->addr_nbytes = 4; return 0; } @@ -29,6 +29,21 @@ static const struct spi_nor_fixups is25lp256_fixups = { .post_bfpt = is25lp256_post_bfpt_fixups, }; +static void pm25lv_nor_late_init(struct spi_nor *nor) +{ + struct spi_nor_erase_map *map = &nor->params->erase_map; + int i; + + /* The PM25LV series has a different 4k sector erase opcode */ + for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) + if (map->erase_type[i].size == 4096) + map->erase_type[i].opcode = SPINOR_OP_BE_4K_PMC; +} + +static const struct spi_nor_fixups pm25lv_nor_fixups = { + .late_init = pm25lv_nor_late_init, +}; + static const struct flash_info issi_nor_parts[] = { /* ISSI */ { "is25cd512", INFO(0x7f9d20, 0, 32 * 1024, 2) @@ -62,9 +77,13 @@ static const struct flash_info issi_nor_parts[] = { /* PMC */ { "pm25lv512", INFO(0, 0, 32 * 1024, 2) - NO_SFDP_FLAGS(SECT_4K_PMC) }, + NO_SFDP_FLAGS(SECT_4K) + .fixups = &pm25lv_nor_fixups + }, { "pm25lv010", INFO(0, 0, 32 * 1024, 4) - NO_SFDP_FLAGS(SECT_4K_PMC) }, + NO_SFDP_FLAGS(SECT_4K) + .fixups = &pm25lv_nor_fixups + }, { "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024, 64) NO_SFDP_FLAGS(SECT_4K) }, }; diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c index a96f74e0f568..3c9681a3f7a3 100644 --- a/drivers/mtd/spi-nor/micron-st.c +++ b/drivers/mtd/spi-nor/micron-st.c @@ -399,8 +399,16 @@ static int micron_st_nor_ready(struct spi_nor *nor) return sr_ready; ret = micron_st_nor_read_fsr(nor, nor->bouncebuf); - if (ret) - return ret; + if (ret) { + /* + * Some controllers, such as Intel SPI, do not support low + * level operations such as reading the flag status + * register. They only expose small amount of high level + * operations to the software. If this is the case we use + * only the status register value. + */ + return ret == -EOPNOTSUPP ? sr_ready : ret; + } if (nor->bouncebuf[0] & (FSR_E_ERR | FSR_P_ERR)) { if (nor->bouncebuf[0] & FSR_E_ERR) diff --git a/drivers/mtd/spi-nor/otp.c b/drivers/mtd/spi-nor/otp.c index fa63d8571218..00ab0d2d6d2f 100644 --- a/drivers/mtd/spi-nor/otp.c +++ b/drivers/mtd/spi-nor/otp.c @@ -35,13 +35,13 @@ */ int spi_nor_otp_read_secr(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf) { - u8 addr_width, read_opcode, read_dummy; + u8 addr_nbytes, read_opcode, read_dummy; struct spi_mem_dirmap_desc *rdesc; enum spi_nor_protocol read_proto; int ret; read_opcode = nor->read_opcode; - addr_width = nor->addr_width; + addr_nbytes = nor->addr_nbytes; read_dummy = nor->read_dummy; read_proto = nor->read_proto; rdesc = nor->dirmap.rdesc; @@ -54,7 +54,7 @@ int spi_nor_otp_read_secr(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf) ret = spi_nor_read_data(nor, addr, len, buf); nor->read_opcode = read_opcode; - nor->addr_width = addr_width; + nor->addr_nbytes = addr_nbytes; nor->read_dummy = read_dummy; nor->read_proto = read_proto; nor->dirmap.rdesc = rdesc; @@ -85,11 +85,11 @@ int spi_nor_otp_write_secr(struct spi_nor *nor, loff_t addr, size_t len, { enum spi_nor_protocol write_proto; struct spi_mem_dirmap_desc *wdesc; - u8 addr_width, program_opcode; + u8 addr_nbytes, program_opcode; int ret, written; program_opcode = nor->program_opcode; - addr_width = nor->addr_width; + addr_nbytes = nor->addr_nbytes; write_proto = nor->write_proto; wdesc = nor->dirmap.wdesc; @@ -113,7 +113,7 @@ int spi_nor_otp_write_secr(struct spi_nor *nor, loff_t addr, size_t len, out: nor->program_opcode = program_opcode; - nor->addr_width = addr_width; + nor->addr_nbytes = addr_nbytes; nor->write_proto = write_proto; nor->dirmap.wdesc = wdesc; diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c index a5211543d30d..2257f1b4c2e2 100644 --- a/drivers/mtd/spi-nor/sfdp.c +++ b/drivers/mtd/spi-nor/sfdp.c @@ -134,7 +134,7 @@ struct sfdp_4bait { /** * spi_nor_read_raw() - raw read of serial flash memory. read_opcode, - * addr_width and read_dummy members of the struct spi_nor + * addr_nbytes and read_dummy members of the struct spi_nor * should be previously * set. * @nor: pointer to a 'struct spi_nor' @@ -178,21 +178,21 @@ static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf) static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr, size_t len, void *buf) { - u8 addr_width, read_opcode, read_dummy; + u8 addr_nbytes, read_opcode, read_dummy; int ret; read_opcode = nor->read_opcode; - addr_width = nor->addr_width; + addr_nbytes = nor->addr_nbytes; read_dummy = nor->read_dummy; nor->read_opcode = SPINOR_OP_RDSFDP; - nor->addr_width = 3; + nor->addr_nbytes = 3; nor->read_dummy = 8; ret = spi_nor_read_raw(nor, addr, len, buf); nor->read_opcode = read_opcode; - nor->addr_width = addr_width; + nor->addr_nbytes = addr_nbytes; nor->read_dummy = read_dummy; return ret; @@ -462,11 +462,13 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor, switch (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) { case BFPT_DWORD1_ADDRESS_BYTES_3_ONLY: case BFPT_DWORD1_ADDRESS_BYTES_3_OR_4: - nor->addr_width = 3; + params->addr_nbytes = 3; + params->addr_mode_nbytes = 3; break; case BFPT_DWORD1_ADDRESS_BYTES_4_ONLY: - nor->addr_width = 4; + params->addr_nbytes = 4; + params->addr_mode_nbytes = 4; break; default: @@ -637,12 +639,12 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor, } /** - * spi_nor_smpt_addr_width() - return the address width used in the + * spi_nor_smpt_addr_nbytes() - return the number of address bytes used in the * configuration detection command. * @nor: pointer to a 'struct spi_nor' * @settings: configuration detection command descriptor, dword1 */ -static u8 spi_nor_smpt_addr_width(const struct spi_nor *nor, const u32 settings) +static u8 spi_nor_smpt_addr_nbytes(const struct spi_nor *nor, const u32 settings) { switch (settings & SMPT_CMD_ADDRESS_LEN_MASK) { case SMPT_CMD_ADDRESS_LEN_0: @@ -653,7 +655,7 @@ static u8 spi_nor_smpt_addr_width(const struct spi_nor *nor, const u32 settings) return 4; case SMPT_CMD_ADDRESS_LEN_USE_CURRENT: default: - return nor->addr_width; + return nor->params->addr_mode_nbytes; } } @@ -690,7 +692,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt, u32 addr; int err; u8 i; - u8 addr_width, read_opcode, read_dummy; + u8 addr_nbytes, read_opcode, read_dummy; u8 read_data_mask, map_id; /* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */ @@ -698,7 +700,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt, if (!buf) return ERR_PTR(-ENOMEM); - addr_width = nor->addr_width; + addr_nbytes = nor->addr_nbytes; read_dummy = nor->read_dummy; read_opcode = nor->read_opcode; @@ -709,7 +711,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt, break; read_data_mask = SMPT_CMD_READ_DATA(smpt[i]); - nor->addr_width = spi_nor_smpt_addr_width(nor, smpt[i]); + nor->addr_nbytes = spi_nor_smpt_addr_nbytes(nor, smpt[i]); nor->read_dummy = spi_nor_smpt_read_dummy(nor, smpt[i]); nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]); addr = smpt[i + 1]; @@ -756,7 +758,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt, /* fall through */ out: kfree(buf); - nor->addr_width = addr_width; + nor->addr_nbytes = addr_nbytes; nor->read_dummy = read_dummy; nor->read_opcode = read_opcode; return ret; @@ -1044,7 +1046,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor, /* * We need at least one 4-byte op code per read, program and erase * operation; the .read(), .write() and .erase() hooks share the - * nor->addr_width value. + * nor->addr_nbytes value. */ if (!read_hwcaps || !pp_hwcaps || !erase_mask) goto out; @@ -1098,7 +1100,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor, * Spansion memory. However this quirk is no longer needed with new * SFDP compliant memories. */ - nor->addr_width = 4; + params->addr_nbytes = 4; nor->flags |= SNOR_F_4B_OPCODES | SNOR_F_HAS_4BAIT; /* fall through */ diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c index 43cd6cd92537..0150049007be 100644 --- a/drivers/mtd/spi-nor/spansion.c +++ b/drivers/mtd/spi-nor/spansion.c @@ -14,6 +14,8 @@ #define SPINOR_OP_CLSR 0x30 /* Clear status register 1 */ #define SPINOR_OP_RD_ANY_REG 0x65 /* Read any register */ #define SPINOR_OP_WR_ANY_REG 0x71 /* Write any register */ +#define SPINOR_REG_CYPRESS_CFR1V 0x00800002 +#define SPINOR_REG_CYPRESS_CFR1V_QUAD_EN BIT(1) /* Quad Enable */ #define SPINOR_REG_CYPRESS_CFR2V 0x00800003 #define SPINOR_REG_CYPRESS_CFR2V_MEMLAT_11_24 0xb #define SPINOR_REG_CYPRESS_CFR3V 0x00800004 @@ -114,6 +116,150 @@ static int cypress_nor_octal_dtr_dis(struct spi_nor *nor) } /** + * cypress_nor_quad_enable_volatile() - enable Quad I/O mode in volatile + * register. + * @nor: pointer to a 'struct spi_nor' + * + * It is recommended to update volatile registers in the field application due + * to a risk of the non-volatile registers corruption by power interrupt. This + * function sets Quad Enable bit in CFR1 volatile. If users set the Quad Enable + * bit in the CFR1 non-volatile in advance (typically by a Flash programmer + * before mounting Flash on PCB), the Quad Enable bit in the CFR1 volatile is + * also set during Flash power-up. + * + * Return: 0 on success, -errno otherwise. + */ +static int cypress_nor_quad_enable_volatile(struct spi_nor *nor) +{ + struct spi_mem_op op; + u8 addr_mode_nbytes = nor->params->addr_mode_nbytes; + u8 cfr1v_written; + int ret; + + op = (struct spi_mem_op) + CYPRESS_NOR_RD_ANY_REG_OP(addr_mode_nbytes, + SPINOR_REG_CYPRESS_CFR1V, + nor->bouncebuf); + + ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto); + if (ret) + return ret; + + if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR1V_QUAD_EN) + return 0; + + /* Update the Quad Enable bit. */ + nor->bouncebuf[0] |= SPINOR_REG_CYPRESS_CFR1V_QUAD_EN; + op = (struct spi_mem_op) + CYPRESS_NOR_WR_ANY_REG_OP(addr_mode_nbytes, + SPINOR_REG_CYPRESS_CFR1V, 1, + nor->bouncebuf); + ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto); + if (ret) + return ret; + + cfr1v_written = nor->bouncebuf[0]; + + /* Read back and check it. */ + op = (struct spi_mem_op) + CYPRESS_NOR_RD_ANY_REG_OP(addr_mode_nbytes, + SPINOR_REG_CYPRESS_CFR1V, + nor->bouncebuf); + ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto); + if (ret) + return ret; + + if (nor->bouncebuf[0] != cfr1v_written) { + dev_err(nor->dev, "CFR1: Read back test failed\n"); + return -EIO; + } + + return 0; +} + +/** + * cypress_nor_set_page_size() - Set page size which corresponds to the flash + * configuration. + * @nor: pointer to a 'struct spi_nor' + * + * The BFPT table advertises a 512B or 256B page size depending on part but the + * page size is actually configurable (with the default being 256B). Read from + * CFR3V[4] and set the correct size. + * + * Return: 0 on success, -errno otherwise. + */ +static int cypress_nor_set_page_size(struct spi_nor *nor) +{ + struct spi_mem_op op = + CYPRESS_NOR_RD_ANY_REG_OP(3, SPINOR_REG_CYPRESS_CFR3V, + nor->bouncebuf); + int ret; + + ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto); + if (ret) + return ret; + + if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR3V_PGSZ) + nor->params->page_size = 512; + else + nor->params->page_size = 256; + + return 0; +} + +static int +s25hx_t_post_bfpt_fixup(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt) +{ + /* Replace Quad Enable with volatile version */ + nor->params->quad_enable = cypress_nor_quad_enable_volatile; + + return cypress_nor_set_page_size(nor); +} + +static void s25hx_t_post_sfdp_fixup(struct spi_nor *nor) +{ + struct spi_nor_erase_type *erase_type = + nor->params->erase_map.erase_type; + unsigned int i; + + /* + * In some parts, 3byte erase opcodes are advertised by 4BAIT. + * Convert them to 4byte erase opcodes. + */ + for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) { + switch (erase_type[i].opcode) { + case SPINOR_OP_SE: + erase_type[i].opcode = SPINOR_OP_SE_4B; + break; + case SPINOR_OP_BE_4K: + erase_type[i].opcode = SPINOR_OP_BE_4K_4B; + break; + default: + break; + } + } +} + +static void s25hx_t_late_init(struct spi_nor *nor) +{ + struct spi_nor_flash_parameter *params = nor->params; + + /* Fast Read 4B requires mode cycles */ + params->reads[SNOR_CMD_READ_FAST].num_mode_clocks = 8; + + /* The writesize should be ECC data unit size */ + params->writesize = 16; +} + +static struct spi_nor_fixups s25hx_t_fixups = { + .post_bfpt = s25hx_t_post_bfpt_fixup, + .post_sfdp = s25hx_t_post_sfdp_fixup, + .late_init = s25hx_t_late_init, +}; + +/** * cypress_nor_octal_dtr_enable() - Enable octal DTR on Cypress flashes. * @nor: pointer to a 'struct spi_nor' * @enable: whether to enable or disable Octal DTR @@ -167,28 +313,7 @@ static int s28hs512t_post_bfpt_fixup(struct spi_nor *nor, const struct sfdp_parameter_header *bfpt_header, const struct sfdp_bfpt *bfpt) { - /* - * The BFPT table advertises a 512B page size but the page size is - * actually configurable (with the default being 256B). Read from - * CFR3V[4] and set the correct size. - */ - struct spi_mem_op op = - CYPRESS_NOR_RD_ANY_REG_OP(3, SPINOR_REG_CYPRESS_CFR3V, - nor->bouncebuf); - int ret; - - spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); - - ret = spi_mem_exec_op(nor->spimem, &op); - if (ret) - return ret; - - if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR3V_PGSZ) - nor->params->page_size = 512; - else - nor->params->page_size = 256; - - return 0; + return cypress_nor_set_page_size(nor); } static const struct spi_nor_fixups s28hs512t_fixups = { @@ -310,6 +435,22 @@ static const struct flash_info spansion_nor_parts[] = { { "s25fl256l", INFO(0x016019, 0, 64 * 1024, 512) NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) FIXUP_FLAGS(SPI_NOR_4B_OPCODES) }, + { "s25hl512t", INFO6(0x342a1a, 0x0f0390, 256 * 1024, 256) + PARSE_SFDP + MFR_FLAGS(USE_CLSR) + .fixups = &s25hx_t_fixups }, + { "s25hl01gt", INFO6(0x342a1b, 0x0f0390, 256 * 1024, 512) + PARSE_SFDP + MFR_FLAGS(USE_CLSR) + .fixups = &s25hx_t_fixups }, + { "s25hs512t", INFO6(0x342b1a, 0x0f0390, 256 * 1024, 256) + PARSE_SFDP + MFR_FLAGS(USE_CLSR) + .fixups = &s25hx_t_fixups }, + { "s25hs01gt", INFO6(0x342b1b, 0x0f0390, 256 * 1024, 512) + PARSE_SFDP + MFR_FLAGS(USE_CLSR) + .fixups = &s25hx_t_fixups }, { "cy15x104q", INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1) FLAGS(SPI_NOR_NO_ERASE) }, { "s28hs512t", INFO(0x345b1a, 0, 256 * 1024, 256) diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c index 1d2f5db047bd..5723157739fc 100644 --- a/drivers/mtd/spi-nor/xilinx.c +++ b/drivers/mtd/spi-nor/xilinx.c @@ -31,7 +31,7 @@ .sector_size = (8 * (_page_size)), \ .n_sectors = (_n_sectors), \ .page_size = (_page_size), \ - .addr_width = 3, \ + .addr_nbytes = 3, \ .flags = SPI_NOR_NO_FR /* Xilinx S3AN share MFR with Atmel SPI NOR */ diff --git a/include/linux/mtd/hyperbus.h b/include/linux/mtd/hyperbus.h index 0ce612428aea..bb6b7121a542 100644 --- a/include/linux/mtd/hyperbus.h +++ b/include/linux/mtd/hyperbus.h @@ -89,9 +89,7 @@ int hyperbus_register_device(struct hyperbus_device *hbdev); /** * hyperbus_unregister_device - deregister HyperBus slave memory device * @hbdev: hyperbus_device to be unregistered - * - * Return: 0 for success, others for failure. */ -int hyperbus_unregister_device(struct hyperbus_device *hbdev); +void hyperbus_unregister_device(struct hyperbus_device *hbdev); #endif /* __LINUX_MTD_HYPERBUS_H__ */ diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 1ede4c89805a..42218a1164f6 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -351,7 +351,7 @@ struct spi_nor_flash_parameter; * @bouncebuf_size: size of the bounce buffer * @info: SPI NOR part JEDEC MFR ID and other info * @manufacturer: SPI NOR manufacturer - * @addr_width: number of address bytes + * @addr_nbytes: number of address bytes * @erase_opcode: the opcode for erasing a sector * @read_opcode: the read opcode * @read_dummy: the dummy needed by the read operation @@ -381,7 +381,7 @@ struct spi_nor { size_t bouncebuf_size; const struct flash_info *info; const struct spi_nor_manufacturer *manufacturer; - u8 addr_width; + u8 addr_nbytes; u8 erase_opcode; u8 read_opcode; u8 read_dummy; diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h index 5584d3bb6556..6d3392a7edc6 100644 --- a/include/linux/mtd/spinand.h +++ b/include/linux/mtd/spinand.h @@ -260,6 +260,7 @@ struct spinand_manufacturer { }; /* SPI NAND manufacturers */ +extern const struct spinand_manufacturer ato_spinand_manufacturer; extern const struct spinand_manufacturer gigadevice_spinand_manufacturer; extern const struct spinand_manufacturer macronix_spinand_manufacturer; extern const struct spinand_manufacturer micron_spinand_manufacturer; diff --git a/include/uapi/mtd/mtd-abi.h b/include/uapi/mtd/mtd-abi.h index b869990c2db2..890d9e5b76d7 100644 --- a/include/uapi/mtd/mtd-abi.h +++ b/include/uapi/mtd/mtd-abi.h @@ -69,8 +69,8 @@ enum { * struct mtd_write_req - data structure for requesting a write operation * * @start: start address - * @len: length of data buffer - * @ooblen: length of OOB buffer + * @len: length of data buffer (only lower 32 bits are used) + * @ooblen: length of OOB buffer (only lower 32 bits are used) * @usr_data: user-provided data buffer * @usr_oob: user-provided OOB buffer * @mode: MTD mode (see "MTD operation modes") |