diff options
| -rw-r--r-- | include/linux/memory-tiers.h | 13 | ||||
| -rw-r--r-- | include/linux/migrate.h | 13 | ||||
| -rw-r--r-- | mm/memory-tiers.c | 238 | ||||
| -rw-r--r-- | mm/migrate.c | 394 | ||||
| -rw-r--r-- | mm/vmstat.c | 4 |
5 files changed, 239 insertions, 423 deletions
diff --git a/include/linux/memory-tiers.h b/include/linux/memory-tiers.h index 49d281866dca..ce9c6bac6725 100644 --- a/include/linux/memory-tiers.h +++ b/include/linux/memory-tiers.h @@ -37,6 +37,14 @@ struct memory_dev_type *alloc_memory_type(int adistance); void destroy_memory_type(struct memory_dev_type *memtype); void init_node_memory_type(int node, struct memory_dev_type *default_type); void clear_node_memory_type(int node, struct memory_dev_type *memtype); +#ifdef CONFIG_MIGRATION +int next_demotion_node(int node); +#else +static inline int next_demotion_node(int node) +{ + return NUMA_NO_NODE; +} +#endif #else @@ -63,5 +71,10 @@ static inline void clear_node_memory_type(int node, struct memory_dev_type *memt { } + +static inline int next_demotion_node(int node) +{ + return NUMA_NO_NODE; +} #endif /* CONFIG_NUMA */ #endif /* _LINUX_MEMORY_TIERS_H */ diff --git a/include/linux/migrate.h b/include/linux/migrate.h index 96f8c84413fe..704a04f5a074 100644 --- a/include/linux/migrate.h +++ b/include/linux/migrate.h @@ -100,19 +100,6 @@ static inline int migrate_huge_page_move_mapping(struct address_space *mapping, #endif /* CONFIG_MIGRATION */ -#if defined(CONFIG_MIGRATION) && defined(CONFIG_NUMA) -extern void set_migration_target_nodes(void); -extern void migrate_on_reclaim_init(void); -extern int next_demotion_node(int node); -#else -static inline void set_migration_target_nodes(void) {} -static inline void migrate_on_reclaim_init(void) {} -static inline int next_demotion_node(int node) -{ - return NUMA_NO_NODE; -} -#endif - #ifdef CONFIG_COMPACTION bool PageMovable(struct page *page); void __SetPageMovable(struct page *page, const struct movable_operations *ops); diff --git a/mm/memory-tiers.c b/mm/memory-tiers.c index babc10a5cc13..ea57fc1f37ac 100644 --- a/mm/memory-tiers.c +++ b/mm/memory-tiers.c @@ -6,6 +6,8 @@ #include <linux/memory.h> #include <linux/memory-tiers.h> +#include "internal.h" + struct memory_tier { /* hierarchy of memory tiers */ struct list_head list; @@ -19,6 +21,10 @@ struct memory_tier { int adistance_start; }; +struct demotion_nodes { + nodemask_t preferred; +}; + struct node_memory_type_map { struct memory_dev_type *memtype; int map_count; @@ -28,6 +34,66 @@ static DEFINE_MUTEX(memory_tier_lock); static LIST_HEAD(memory_tiers); static struct node_memory_type_map node_memory_types[MAX_NUMNODES]; static struct memory_dev_type *default_dram_type; +#ifdef CONFIG_MIGRATION +/* + * node_demotion[] examples: + * + * Example 1: + * + * Node 0 & 1 are CPU + DRAM nodes, node 2 & 3 are PMEM nodes. + * + * node distances: + * node 0 1 2 3 + * 0 10 20 30 40 + * 1 20 10 40 30 + * 2 30 40 10 40 + * 3 40 30 40 10 + * + * memory_tiers0 = 0-1 + * memory_tiers1 = 2-3 + * + * node_demotion[0].preferred = 2 + * node_demotion[1].preferred = 3 + * node_demotion[2].preferred = <empty> + * node_demotion[3].preferred = <empty> + * + * Example 2: + * + * Node 0 & 1 are CPU + DRAM nodes, node 2 is memory-only DRAM node. + * + * node distances: + * node 0 1 2 + * 0 10 20 30 + * 1 20 10 30 + * 2 30 30 10 + * + * memory_tiers0 = 0-2 + * + * node_demotion[0].preferred = <empty> + * node_demotion[1].preferred = <empty> + * node_demotion[2].preferred = <empty> + * + * Example 3: + * + * Node 0 is CPU + DRAM nodes, Node 1 is HBM node, node 2 is PMEM node. + * + * node distances: + * node 0 1 2 + * 0 10 20 30 + * 1 20 10 40 + * 2 30 40 10 + * + * memory_tiers0 = 1 + * memory_tiers1 = 0 + * memory_tiers2 = 2 + * + * node_demotion[0].preferred = 2 + * node_demotion[1].preferred = 0 + * node_demotion[2].preferred = <empty> + * + */ +static struct demotion_nodes *node_demotion __read_mostly; +#endif /* CONFIG_MIGRATION */ static struct memory_tier *find_create_memory_tier(struct memory_dev_type *memtype) { @@ -73,6 +139,154 @@ static struct memory_tier *find_create_memory_tier(struct memory_dev_type *memty return new_memtier; } +static struct memory_tier *__node_get_memory_tier(int node) +{ + struct memory_dev_type *memtype; + + memtype = node_memory_types[node]; + if (memtype && node_isset(node, memtype->nodes)) + return memtype->memtier; + return NULL; +} + +#ifdef CONFIG_MIGRATION +/** + * next_demotion_node() - Get the next node in the demotion path + * @node: The starting node to lookup the next node + * + * Return: node id for next memory node in the demotion path hierarchy + * from @node; NUMA_NO_NODE if @node is terminal. This does not keep + * @node online or guarantee that it *continues* to be the next demotion + * target. + */ +int next_demotion_node(int node) +{ + struct demotion_nodes *nd; + int target; + + if (!node_demotion) + return NUMA_NO_NODE; + + nd = &node_demotion[node]; + + /* + * node_demotion[] is updated without excluding this + * function from running. + * + * Make sure to use RCU over entire code blocks if + * node_demotion[] reads need to be consistent. + */ + rcu_read_lock(); + /* + * If there are multiple target nodes, just select one + * target node randomly. + * + * In addition, we can also use round-robin to select + * target node, but we should introduce another variable + * for node_demotion[] to record last selected target node, + * that may cause cache ping-pong due to the changing of + * last target node. Or introducing per-cpu data to avoid + * caching issue, which seems more complicated. So selecting + * target node randomly seems better until now. + */ + target = node_random(&nd->preferred); + rcu_read_unlock(); + + return target; +} + +static void disable_all_demotion_targets(void) +{ + int node; + + for_each_node_state(node, N_MEMORY) + node_demotion[node].preferred = NODE_MASK_NONE; + /* + * Ensure that the "disable" is visible across the system. + * Readers will see either a combination of before+disable + * state or disable+after. They will never see before and + * after state together. + */ + synchronize_rcu(); +} + +static __always_inline nodemask_t get_memtier_nodemask(struct memory_tier *memtier) +{ + nodemask_t nodes = NODE_MASK_NONE; + struct memory_dev_type *memtype; + + list_for_each_entry(memtype, &memtier->memory_types, tier_sibiling) + nodes_or(nodes, nodes, memtype->nodes); + + return nodes; +} + +/* + * Find an automatic demotion target for all memory + * nodes. Failing here is OK. It might just indicate + * being at the end of a chain. + */ +static void establish_demotion_targets(void) +{ + struct memory_tier *memtier; + struct demotion_nodes *nd; + int target = NUMA_NO_NODE, node; + int distance, best_distance; + nodemask_t tier_nodes; + + lockdep_assert_held_once(&memory_tier_lock); + + if (!node_demotion || !IS_ENABLED(CONFIG_MIGRATION)) + return; + + disable_all_demotion_targets(); + + for_each_node_state(node, N_MEMORY) { + best_distance = -1; + nd = &node_demotion[node]; + + memtier = __node_get_memory_tier(node); + if (!memtier || list_is_last(&memtier->list, &memory_tiers)) + continue; + /* + * Get the lower memtier to find the demotion node list. + */ + memtier = list_next_entry(memtier, list); + tier_nodes = get_memtier_nodemask(memtier); + /* + * find_next_best_node, use 'used' nodemask as a skip list. + * Add all memory nodes except the selected memory tier + * nodelist to skip list so that we find the best node from the + * memtier nodelist. + */ + nodes_andnot(tier_nodes, node_states[N_MEMORY], tier_nodes); + + /* + * Find all the nodes in the memory tier node list of same best distance. + * add them to the preferred mask. We randomly select between nodes + * in the preferred mask when allocating pages during demotion. + */ + do { + target = find_next_best_node(node, &tier_nodes); + if (target == NUMA_NO_NODE) + break; + + distance = node_distance(node, target); + if (distance == best_distance || best_distance == -1) { + best_distance = distance; + node_set(target, nd->preferred); + } else { + break; + } + } while (1); + } +} + +#else +static inline void disable_all_demotion_targets(void) {} +static inline void establish_demotion_targets(void) {} +#endif /* CONFIG_MIGRATION */ + static inline void __init_node_memory_type(int node, struct memory_dev_type *memtype) { if (!node_memory_types[node].memtype) @@ -109,16 +323,6 @@ static struct memory_tier *set_node_memory_tier(int node) return memtier; } -static struct memory_tier *__node_get_memory_tier(int node) -{ - struct memory_dev_type *memtype; - - memtype = node_memory_types[node]; - if (memtype && node_isset(node, memtype->nodes)) - return memtype->memtier; - return NULL; -} - static void destroy_memory_tier(struct memory_tier *memtier) { list_del(&memtier->list); @@ -207,6 +411,7 @@ EXPORT_SYMBOL_GPL(clear_node_memory_type); static int __meminit memtier_hotplug_callback(struct notifier_block *self, unsigned long action, void *_arg) { + struct memory_tier *memtier; struct memory_notify *arg = _arg; /* @@ -219,12 +424,15 @@ static int __meminit memtier_hotplug_callback(struct notifier_block *self, switch (action) { case MEM_OFFLINE: mutex_lock(&memory_tier_lock); - clear_node_memory_tier(arg->status_change_nid); + if (clear_node_memory_tier(arg->status_change_nid)) + establish_demotion_targets(); mutex_unlock(&memory_tier_lock); break; case MEM_ONLINE: mutex_lock(&memory_tier_lock); - set_node_memory_tier(arg->status_change_nid); + memtier = set_node_memory_tier(arg->status_change_nid); + if (!IS_ERR(memtier)) + establish_demotion_targets(); mutex_unlock(&memory_tier_lock); break; } @@ -237,6 +445,11 @@ static int __init memory_tier_init(void) int node; struct memory_tier *memtier; +#ifdef CONFIG_MIGRATION + node_demotion = kcalloc(nr_node_ids, sizeof(struct demotion_nodes), + GFP_KERNEL); + WARN_ON(!node_demotion); +#endif mutex_lock(&memory_tier_lock); /* * For now we can have 4 faster memory tiers with smaller adistance @@ -259,6 +472,7 @@ static int __init memory_tier_init(void) */ break; } + establish_demotion_targets(); mutex_unlock(&memory_tier_lock); hotplug_memory_notifier(memtier_hotplug_callback, MEMTIER_HOTPLUG_PRIO); diff --git a/mm/migrate.c b/mm/migrate.c index 30477cf4868d..2a2329bf7c1a 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -2198,398 +2198,4 @@ out: return 0; } #endif /* CONFIG_NUMA_BALANCING */ - -/* - * node_demotion[] example: - * - * Consider a system with two sockets. Each socket has - * three classes of memory attached: fast, medium and slow. - * Each memory class is placed in its own NUMA node. The - * CPUs are placed in the node with the "fast" memory. The - * 6 NUMA nodes (0-5) might be split among the sockets like - * this: - * - * Socket A: 0, 1, 2 - * Socket B: 3, 4, 5 - * - * When Node 0 fills up, its memory should be migrated to - * Node 1. When Node 1 fills up, it should be migrated to - * Node 2. The migration path start on the nodes with the - * processors (since allocations default to this node) and - * fast memory, progress through medium and end with the - * slow memory: - * - * 0 -> 1 -> 2 -> stop - * 3 -> 4 -> 5 -> stop - * - * This is represented in the node_demotion[] like this: - * - * { nr=1, nodes[0]=1 }, // Node 0 migrates to 1 - * { nr=1, nodes[0]=2 }, // Node 1 migrates to 2 - * { nr=0, nodes[0]=-1 }, // Node 2 does not migrate - * { nr=1, nodes[0]=4 }, // Node 3 migrates to 4 - * { nr=1, nodes[0]=5 }, // Node 4 migrates to 5 - * { nr=0, nodes[0]=-1 }, // Node 5 does not migrate - * - * Moreover some systems may have multiple slow memory nodes. - * Suppose a system has one socket with 3 memory nodes, node 0 - * is fast memory type, and node 1/2 both are slow memory - * type, and the distance between fast memory node and slow - * memory node is same. So the migration path should be: - * - * 0 -> 1/2 -> stop - * - * This is represented in the node_demotion[] like this: - * { nr=2, {nodes[0]=1, nodes[1]=2} }, // Node 0 migrates to node 1 and node 2 - * { nr=0, nodes[0]=-1, }, // Node 1 dose not migrate - * { nr=0, nodes[0]=-1, }, // Node 2 does not migrate - */ - -/* - * Writes to this array occur without locking. Cycles are - * not allowed: Node X demotes to Y which demotes to X... - * - * If multiple reads are performed, a single rcu_read_lock() - * must be held over all reads to ensure that no cycles are - * observed. - */ -#define DEFAULT_DEMOTION_TARGET_NODES 15 - -#if MAX_NUMNODES < DEFAULT_DEMOTION_TARGET_NODES -#define DEMOTION_TARGET_NODES (MAX_NUMNODES - 1) -#else -#define DEMOTION_TARGET_NODES DEFAULT_DEMOTION_TARGET_NODES -#endif - -struct demotion_nodes { - unsigned short nr; - short nodes[DEMOTION_TARGET_NODES]; -}; - -static struct demotion_nodes *node_demotion __read_mostly; - -/** - * next_demotion_node() - Get the next node in the demotion path - * @node: The starting node to lookup the next node - * - * Return: node id for next memory node in the demotion path hierarchy - * from @node; NUMA_NO_NODE if @node is terminal. This does not keep - * @node online or guarantee that it *continues* to be the next demotion - * target. - */ -int next_demotion_node(int node) -{ - struct demotion_nodes *nd; - unsigned short target_nr, index; - int target; - - if (!node_demotion) - return NUMA_NO_NODE; - - nd = &node_demotion[node]; - - /* - * node_demotion[] is updated without excluding this - * function from running. RCU doesn't provide any - * compiler barriers, so the READ_ONCE() is required - * to avoid compiler reordering or read merging. - * - * Make sure to use RCU over entire code blocks if - * node_demotion[] reads need to be consistent. - */ - rcu_read_lock(); - target_nr = READ_ONCE(nd->nr); - - switch (target_nr) { - case 0: - target = NUMA_NO_NODE; - goto out; - case 1: - index = 0; - break; - default: - /* - * If there are multiple target nodes, just select one - * target node randomly. - * - * In addition, we can also use round-robin to select - * target node, but we should introduce another variable - * for node_demotion[] to record last selected target node, - * that may cause cache ping-pong due to the changing of - * last target node. Or introducing per-cpu data to avoid - * caching issue, which seems more complicated. So selecting - * target node randomly seems better until now. - */ - index = get_random_int() % target_nr; - break; - } - - target = READ_ONCE(nd->nodes[index]); - -out: - rcu_read_unlock(); - return target; -} - -/* Disable reclaim-based migration. */ -static void __disable_all_migrate_targets(void) -{ - int node, i; - - if (!node_demotion) - return; - - for_each_online_node(node) { - node_demotion[node].nr = 0; - for (i = 0; i < DEMOTION_TARGET_NODES; i++) - node_demotion[node].nodes[i] = NUMA_NO_NODE; - } -} - -static void disable_all_migrate_targets(void) -{ - __disable_all_migrate_targets(); - - /* - * Ensure that the "disable" is visible across the system. - * Readers will see either a combination of before+disable - * state or disable+after. They will never see before and - * after state together. - * - * The before+after state together might have cycles and - * could cause readers to do things like loop until this - * function finishes. This ensures they can only see a - * single "bad" read and would, for instance, only loop - * once. - */ - synchronize_rcu(); -} - -/* - * Find an automatic demotion target for 'node'. - * Failing here is OK. It might just indicate - * being at the end of a chain. - */ -static int establish_migrate_target(int node, nodemask_t *used, - int best_distance) -{ - int migration_target, index, val; - struct demotion_nodes *nd; - - if (!node_demotion) - return NUMA_NO_NODE; - - nd = &node_demotion[node]; - - migration_target = find_next_best_node(node, used); - if (migration_target == NUMA_NO_NODE) - return NUMA_NO_NODE; - - /* - * If the node has been set a migration target node before, - * which means it's the best distance between them. Still - * check if this node can be demoted to other target nodes - * if they have a same best distance. - */ - if (best_distance != -1) { - val = node_distance(node, migration_target); - if (val > best_distance) - goto out_clear; - } - - index = nd->nr; - if (WARN_ONCE(index >= DEMOTION_TARGET_NODES, - "Exceeds maximum demotion target nodes\n")) - goto out_clear; - - nd->nodes[index] = migration_target; - nd->nr++; - - return migration_target; -out_clear: - node_clear(migration_target, *used); - return NUMA_NO_NODE; -} - -/* - * When memory fills up on a node, memory contents can be - * automatically migrated to another node instead of - * discarded at reclaim. - * - * Establish a "migration path" which will start at nodes - * with CPUs and will follow the priorities used to build the - * page allocator zonelists. - * - * The difference here is that cycles must be avoided. If - * node0 migrates to node1, then neither node1, nor anything - * node1 migrates to can migrate to node0. Also one node can - * be migrated to multiple nodes if the target nodes all have - * a same best-distance against the source node. - * - * This function can run simultaneously with readers of - * node_demotion[]. However, it can not run simultaneously - * with itself. Exclusion is provided by memory hotplug events - * being single-threaded. - */ -static void __set_migration_target_nodes(void) -{ - nodemask_t next_pass; - nodemask_t this_pass; - nodemask_t used_targets = NODE_MASK_NONE; - int node, best_distance; - - /* - * Avoid any oddities like cycles that could occur - * from changes in the topology. This will leave - * a momentary gap when migration is disabled. - */ - disable_all_migrate_targets(); - - /* - * Allocations go close to CPUs, first. Assume that - * the migration path starts at the nodes with CPUs. - */ - next_pass = node_states[N_CPU]; -again: - this_pass = next_pass; - next_pass = NODE_MASK_NONE; - /* - * To avoid cycles in the migration "graph", ensure - * that migration sources are not future targets by - * setting them in 'used_targets'. Do this only - * once per pass so that multiple source nodes can - * share a target node. - * - * 'used_targets' will become unavailable in future - * passes. This limits some opportunities for - * multiple source nodes to share a destination. - */ - nodes_or(used_targets, used_targets, this_pass); - - for_each_node_mask(node, this_pass) { - best_distance = -1; - - /* - * Try to set up the migration path for the node, and the target - * migration nodes can be multiple, so doing a loop to find all - * the target nodes if they all have a best node distance. - */ - do { - int target_node = - establish_migrate_target(node, &used_targets, - best_distance); - - if (target_node == NUMA_NO_NODE) - break; - - if (best_distance == -1) - best_distance = node_distance(node, target_node); - - /* - * Visit targets from this pass in the next pass. - * Eventually, every node will have been part of - * a pass, and will become set in 'used_targets'. - */ - node_set(target_node, next_pass); - } while (1); - } - /* - * 'next_pass' contains nodes which became migration - * targets in this pass. Make additional passes until - * no more migrations targets are available. - */ - if (!nodes_empty(next_pass)) - goto again; -} - -/* - * For callers that do not hold get_online_mems() already. - */ -void set_migration_target_nodes(void) -{ - get_online_mems(); - __set_migration_target_nodes(); - put_online_mems(); -} - -/* - * This leaves migrate-on-reclaim transiently disabled between - * the MEM_GOING_OFFLINE and MEM_OFFLINE events. This runs - * whether reclaim-based migration is enabled or not, which - * ensures that the user can turn reclaim-based migration at - * any time without needing to recalculate migration targets. - * - * These callbacks already hold get_online_mems(). That is why - * __set_migration_target_nodes() can be used as opposed to - * set_migration_target_nodes(). - */ -#ifdef CONFIG_MEMORY_HOTPLUG -static int __meminit migrate_on_reclaim_callback(struct notifier_block *self, - unsigned long action, void *_arg) -{ - struct memory_notify *arg = _arg; - - /* - * Only update the node migration order when a node is - * changing status, like online->offline. This avoids - * the overhead of synchronize_rcu() in most cases. - */ - if (arg->status_change_nid < 0) - return notifier_from_errno(0); - - switch (action) { - case MEM_GOING_OFFLINE: - /* - * Make sure there are not transient states where - * an offline node is a migration target. This - * will leave migration disabled until the offline - * completes and the MEM_OFFLINE case below runs. - */ - disable_all_migrate_targets(); - break; - case MEM_OFFLINE: - case MEM_ONLINE: - /* - * Recalculate the target nodes once the node - * reaches its final state (online or offline). - */ - __set_migration_target_nodes(); - break; - case MEM_CANCEL_OFFLINE: - /* - * MEM_GOING_OFFLINE disabled all the migration - * targets. Reenable them. - */ - __set_migration_target_nodes(); - break; - case MEM_GOING_ONLINE: - case MEM_CANCEL_ONLINE: - break; - } - - return notifier_from_errno(0); -} -#endif - -void __init migrate_on_reclaim_init(void) -{ - node_demotion = kcalloc(nr_node_ids, - sizeof(struct demotion_nodes), - GFP_KERNEL); - WARN_ON(!node_demotion); -#ifdef CONFIG_MEMORY_HOTPLUG - hotplug_memory_notifier(migrate_on_reclaim_callback, 100); -#endif - /* - * At this point, all numa nodes with memory/CPus have their state - * properly set, so we can build the demotion order now. - * Let us hold the cpu_hotplug lock just, as we could possibily have - * CPU hotplug events during boot. - */ - cpus_read_lock(); - set_migration_target_nodes(); - cpus_read_unlock(); -} #endif /* CONFIG_NUMA */ - - diff --git a/mm/vmstat.c b/mm/vmstat.c index c109167a669c..779f1ea6e8ea 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -28,7 +28,6 @@ #include <linux/mm_inline.h> #include <linux/page_ext.h> #include <linux/page_owner.h> -#include <linux/migrate.h> #include "internal.h" @@ -2068,7 +2067,6 @@ static int vmstat_cpu_online(unsigned int cpu) if (!node_state(cpu_to_node(cpu), N_CPU)) { node_set_state(cpu_to_node(cpu), N_CPU); - set_migration_target_nodes(); } return 0; @@ -2093,7 +2091,6 @@ static int vmstat_cpu_dead(unsigned int cpu) return 0; node_clear_state(node, N_CPU); - set_migration_target_nodes(); return 0; } @@ -2126,7 +2123,6 @@ void __init init_mm_internals(void) start_shepherd_timer(); #endif - migrate_on_reclaim_init(); #ifdef CONFIG_PROC_FS proc_create_seq("buddyinfo", 0444, NULL, &fragmentation_op); proc_create_seq("pagetypeinfo", 0400, NULL, &pagetypeinfo_op); |