diff options
| -rw-r--r-- | Documentation/spi/butterfly | 57 | ||||
| -rw-r--r-- | Documentation/spi/spi-summary | 457 | ||||
| -rw-r--r-- | arch/arm/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/touchscreen/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/input/touchscreen/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/touchscreen/ads7846.c | 625 | ||||
| -rw-r--r-- | drivers/mtd/devices/Kconfig | 16 | ||||
| -rw-r--r-- | drivers/mtd/devices/Makefile | 2 | ||||
| -rw-r--r-- | drivers/mtd/devices/m25p80.c | 582 | ||||
| -rw-r--r-- | drivers/mtd/devices/mtd_dataflash.c | 629 | ||||
| -rw-r--r-- | drivers/spi/Kconfig | 109 | ||||
| -rw-r--r-- | drivers/spi/Makefile | 25 | ||||
| -rw-r--r-- | drivers/spi/spi.c | 642 | ||||
| -rw-r--r-- | drivers/spi/spi_bitbang.c | 472 | ||||
| -rw-r--r-- | drivers/spi/spi_butterfly.c | 423 | ||||
| -rw-r--r-- | include/linux/spi/ads7846.h | 18 | ||||
| -rw-r--r-- | include/linux/spi/flash.h | 31 | ||||
| -rw-r--r-- | include/linux/spi/spi.h | 668 | ||||
| -rw-r--r-- | include/linux/spi/spi_bitbang.h | 135 |
21 files changed, 4910 insertions, 0 deletions
diff --git a/Documentation/spi/butterfly b/Documentation/spi/butterfly new file mode 100644 index 000000000000..a2e8c8d90e35 --- /dev/null +++ b/Documentation/spi/butterfly @@ -0,0 +1,57 @@ +spi_butterfly - parport-to-butterfly adapter driver +=================================================== + +This is a hardware and software project that includes building and using +a parallel port adapter cable, together with an "AVR Butterfly" to run +firmware for user interfacing and/or sensors. A Butterfly is a $US20 +battery powered card with an AVR microcontroller and lots of goodies: +sensors, LCD, flash, toggle stick, and more. You can use AVR-GCC to +develop firmware for this, and flash it using this adapter cable. + +You can make this adapter from an old printer cable and solder things +directly to the Butterfly. Or (if you have the parts and skills) you +can come up with something fancier, providing ciruit protection to the +Butterfly and the printer port, or with a better power supply than two +signal pins from the printer port. + + +The first cable connections will hook Linux up to one SPI bus, with the +AVR and a DataFlash chip; and to the AVR reset line. This is all you +need to reflash the firmware, and the pins are the standard Atmel "ISP" +connector pins (used also on non-Butterfly AVR boards). + + Signal Butterfly Parport (DB-25) + ------ --------- --------------- + SCK = J403.PB1/SCK = pin 2/D0 + RESET = J403.nRST = pin 3/D1 + VCC = J403.VCC_EXT = pin 8/D6 + MOSI = J403.PB2/MOSI = pin 9/D7 + MISO = J403.PB3/MISO = pin 11/S7,nBUSY + GND = J403.GND = pin 23/GND + +Then to let Linux master that bus to talk to the DataFlash chip, you must +(a) flash new firmware that disables SPI (set PRR.2, and disable pullups +by clearing PORTB.[0-3]); (b) configure the mtd_dataflash driver; and +(c) cable in the chipselect. + + Signal Butterfly Parport (DB-25) + ------ --------- --------------- + VCC = J400.VCC_EXT = pin 7/D5 + SELECT = J400.PB0/nSS = pin 17/C3,nSELECT + GND = J400.GND = pin 24/GND + +The "USI" controller, using J405, can be used for a second SPI bus. That +would let you talk to the AVR over SPI, running firmware that makes it act +as an SPI slave, while letting either Linux or the AVR use the DataFlash. +There are plenty of spare parport pins to wire this one up, such as: + + Signal Butterfly Parport (DB-25) + ------ --------- --------------- + SCK = J403.PE4/USCK = pin 5/D3 + MOSI = J403.PE5/DI = pin 6/D4 + MISO = J403.PE6/DO = pin 12/S5,nPAPEROUT + GND = J403.GND = pin 22/GND + + IRQ = J402.PF4 = pin 10/S6,ACK + GND = J402.GND(P2) = pin 25/GND + diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary new file mode 100644 index 000000000000..a5ffba33a351 --- /dev/null +++ b/Documentation/spi/spi-summary @@ -0,0 +1,457 @@ +Overview of Linux kernel SPI support +==================================== + +02-Dec-2005 + +What is SPI? +------------ +The "Serial Peripheral Interface" (SPI) is a synchronous four wire serial +link used to connect microcontrollers to sensors, memory, and peripherals. + +The three signal wires hold a clock (SCLK, often on the order of 10 MHz), +and parallel data lines with "Master Out, Slave In" (MOSI) or "Master In, +Slave Out" (MISO) signals. (Other names are also used.) There are four +clocking modes through which data is exchanged; mode-0 and mode-3 are most +commonly used. Each clock cycle shifts data out and data in; the clock +doesn't cycle except when there is data to shift. + +SPI masters may use a "chip select" line to activate a given SPI slave +device, so those three signal wires may be connected to several chips +in parallel. All SPI slaves support chipselects. Some devices have +other signals, often including an interrupt to the master. + +Unlike serial busses like USB or SMBUS, even low level protocols for +SPI slave functions are usually not interoperable between vendors +(except for cases like SPI memory chips). + + - SPI may be used for request/response style device protocols, as with + touchscreen sensors and memory chips. + + - It may also be used to stream data in either direction (half duplex), + or both of them at the same time (full duplex). + + - Some devices may use eight bit words. Others may different word + lengths, such as streams of 12-bit or 20-bit digital samples. + +In the same way, SPI slaves will only rarely support any kind of automatic +discovery/enumeration protocol. The tree of slave devices accessible from +a given SPI master will normally be set up manually, with configuration +tables. + +SPI is only one of the names used by such four-wire protocols, and +most controllers have no problem handling "MicroWire" (think of it as +half-duplex SPI, for request/response protocols), SSP ("Synchronous +Serial Protocol"), PSP ("Programmable Serial Protocol"), and other +related protocols. + +Microcontrollers often support both master and slave sides of the SPI +protocol. This document (and Linux) currently only supports the master +side of SPI interactions. + + +Who uses it? On what kinds of systems? +--------------------------------------- +Linux developers using SPI are probably writing device drivers for embedded +systems boards. SPI is used to control external chips, and it is also a +protocol supported by every MMC or SD memory card. (The older "DataFlash" +cards, predating MMC cards but using the same connectors and card shape, +support only SPI.) Some PC hardware uses SPI flash for BIOS code. + +SPI slave chips range from digital/analog converters used for analog +sensors and codecs, to memory, to peripherals like USB controllers +or Ethernet adapters; and more. + +Most systems using SPI will integrate a few devices on a mainboard. +Some provide SPI links on expansion connectors; in cases where no +dedicated SPI controller exists, GPIO pins can be used to create a +low speed "bitbanging" adapter. Very few systems will "hotplug" an SPI +controller; the reasons to use SPI focus on low cost and simple operation, +and if dynamic reconfiguration is important, USB will often be a more +appropriate low-pincount peripheral bus. + +Many microcontrollers that can run Linux integrate one or more I/O +interfaces with SPI modes. Given SPI support, they could use MMC or SD +cards without needing a special purpose MMC/SD/SDIO controller. + + +How do these driver programming interfaces work? +------------------------------------------------ +The <linux/spi/spi.h> header file includes kerneldoc, as does the +main source code, and you should certainly read that. This is just +an overview, so you get the big picture before the details. + +SPI requests always go into I/O queues. Requests for a given SPI device +are always executed in FIFO order, and complete asynchronously through +completion callbacks. There are also some simple synchronous wrappers +for those calls, including ones for common transaction types like writing +a command and then reading its response. + +There are two types of SPI driver, here called: + + Controller drivers ... these are often built in to System-On-Chip + processors, and often support both Master and Slave roles. + These drivers touch hardware registers and may use DMA. + Or they can be PIO bitbangers, needing just GPIO pins. + + Protocol drivers ... these pass messages through the controller + driver to communicate with a Slave or Master device on the + other side of an SPI link. + +So for example one protocol driver might talk to the MTD layer to export +data to filesystems stored on SPI flash like DataFlash; and others might +control audio interfaces, present touchscreen sensors as input interfaces, +or monitor temperature and voltage levels during industrial processing. +And those might all be sharing the same controller driver. + +A "struct spi_device" encapsulates the master-side interface between +those two types of driver. At this writing, Linux has no slave side +programming interface. + +There is a minimal core of SPI programming interfaces, focussing on +using driver model to connect controller and protocol drivers using +device tables provided by board specific initialization code. SPI +shows up in sysfs in several locations: + + /sys/devices/.../CTLR/spiB.C ... spi_device for on bus "B", + chipselect C, accessed through CTLR. + + /sys/devices/.../CTLR/spiB.C/modalias ... identifies the driver + that should be used with this device (for hotplug/coldplug) + + /sys/bus/spi/devices/spiB.C ... symlink to the physical + spiB-C device + + /sys/bus/spi/drivers/D ... driver for one or more spi*.* devices + + /sys/class/spi_master/spiB ... class device for the controller + managing bus "B". All the spiB.* devices share the same + physical SPI bus segment, with SCLK, MOSI, and MISO. + + +How does board-specific init code declare SPI devices? +------------------------------------------------------ +Linux needs several kinds of information to properly configure SPI devices. +That information is normally provided by board-specific code, even for +chips that do support some of automated discovery/enumeration. + +DECLARE CONTROLLERS + +The first kind of information is a list of what SPI controllers exist. +For System-on-Chip (SOC) based boards, these will usually be platform +devices, and the controller may need some platform_data in order to +operate properly. The "struct platform_device" will include resources +like the physical address of the controller's first register and its IRQ. + +Platforms will often abstract the "register SPI controller" operation, +maybe coupling it with code to initialize pin configurations, so that +the arch/.../mach-*/board-*.c files for several boards can all share the +same basic controller setup code. This is because most SOCs have several +SPI-capable controllers, and only the ones actually usable on a given +board should normally be set up and registered. + +So for example arch/.../mach-*/board-*.c files might have code like: + + #include <asm/arch/spi.h> /* for mysoc_spi_data */ + + /* if your mach-* infrastructure doesn't support kernels that can + * run on multiple boards, pdata wouldn't benefit from "__init". + */ + static struct mysoc_spi_data __init pdata = { ... }; + + static __init board_init(void) + { + ... + /* this board only uses SPI controller #2 */ + mysoc_register_spi(2, &pdata); + ... + } + +And SOC-specific utility code might look something like: + + #include <asm/arch/spi.h> + + static struct platform_device spi2 = { ... }; + + void mysoc_register_spi(unsigned n, struct mysoc_spi_data *pdata) + { + struct mysoc_spi_data *pdata2; + + pdata2 = kmalloc(sizeof *pdata2, GFP_KERNEL); + *pdata2 = pdata; + ... + if (n == 2) { + spi2->dev.platform_data = pdata2; + register_platform_device(&spi2); + + /* also: set up pin modes so the spi2 signals are + * visible on the relevant pins ... bootloaders on + * production boards may already have done this, but + * developer boards will often need Linux to do it. + */ + } + ... + } + +Notice how the platform_data for boards may be different, even if the +same SOC controller is used. For example, on one board SPI might use +an external clock, where another derives the SPI clock from current +settings of some master clock. + + +DECLARE SLAVE DEVICES + +The second kind of information is a list of what SPI slave devices exist +on the target board, often with some board-specific data needed for the +driver to work correctly. + +Normally your arch/.../mach-*/board-*.c files would provide a small table +listing the SPI devices on each board. (This would typically be only a +small handful.) That might look like: + + static struct ads7846_platform_data ads_info = { + .vref_delay_usecs = 100, + .x_plate_ohms = 580, + .y_plate_ohms = 410, + }; + + static struct spi_board_info spi_board_info[] __initdata = { + { + .modalias = "ads7846", + .platform_data = &ads_info, + .mode = SPI_MODE_0, + .irq = GPIO_IRQ(31), + .max_speed_hz = 120000 /* max sample rate at 3V */ * 16, + .bus_num = 1, + .chip_select = 0, + }, + }; + +Again, notice how board-specific information is provided; each chip may need +several types. This example shows generic constraints like the fastest SPI +clock to allow (a function of board voltage in this case) or how an IRQ pin +is wired, plus chip-specific constraints like an important delay that's +changed by the capacitance at one pin. + +(There's also "controller_data", information that may be useful to the +controller driver. An example would be peripheral-specific DMA tuning +data or chipselect callbacks. This is stored in spi_device later.) + +The board_info should provide enough information to let the system work +without the chip's driver being loaded. The most troublesome aspect of +that is likely the SPI_CS_HIGH bit in the spi_device.mode field, since +sharing a bus with a device that interprets chipselect "backwards" is +not possible. + +Then your board initialization code would register that table with the SPI +infrastructure, so that it's available later when the SPI master controller +driver is registered: + + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); + +Like with other static board-specific setup, you won't unregister those. + +The widely used "card" style computers bundle memory, cpu, and little else +onto a card that's maybe just thirty square centimeters. On such systems, +your arch/.../mach-.../board-*.c file would primarily provide information +about the devices on the mainboard into which such a card is plugged. That +certainly includes SPI devices hooked up through the card connectors! + + +NON-STATIC CONFIGURATIONS + +Developer boards often play by different rules than product boards, and one +example is the potential need to hotplug SPI devices and/or controllers. + +For those cases you might need to use use spi_busnum_to_master() to look +up the spi bus master, and will likely need spi_new_device() to provide the +board info based on the board that was hotplugged. Of course, you'd later +call at least spi_unregister_device() when that board is removed. + +When Linux includes support for MMC/SD/SDIO/DataFlash cards through SPI, those +configurations will also be dynamic. Fortunately, those devices all support +basic device identification probes, so that support should hotplug normally. + + +How do I write an "SPI Protocol Driver"? +---------------------------------------- +All SPI drivers are currently kernel drivers. A userspace driver API +would just be another kernel driver, probably offering some lowlevel +access through aio_read(), aio_write(), and ioctl() calls and using the +standard userspace sysfs mechanisms to bind to a given SPI device. + +SPI protocol drivers somewhat resemble platform device drivers: + + static struct spi_driver CHIP_driver = { + .driver = { + .name = "CHIP", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + + .probe = CHIP_probe, + .remove = __devexit_p(CHIP_remove), + .suspend = CHIP_suspend, + .resume = CHIP_resume, + }; + +The driver core will autmatically attempt to bind this driver to any SPI +device whose board_info gave a modalias of "CHIP". Your probe() code +might look like this unless you're creating a class_device: + + static int __devinit CHIP_probe(struct spi_device *spi) + { + struct CHIP *chip; + struct CHIP_platform_data *pdata; + + /* assuming the driver requires board-specific data: */ + pdata = &spi->dev.platform_data; + if (!pdata) + return -ENODEV; + + /* get memory for driver's per-chip state */ + chip = kzalloc(sizeof *chip, GFP_KERNEL); + if (!chip) + return -ENOMEM; + dev_set_drvdata(&spi->dev, chip); + + ... etc + return 0; + } + +As soon as it enters probe(), the driver may issue I/O requests to +the SPI device using "struct spi_message". When remove() returns, +the driver guarantees that it won't submit any more such messages. + + - An spi_message is a sequence of of protocol operations, executed + as one atomic sequence. SPI driver controls include: + + + when bidirectional reads and writes start ... by how its + sequence of spi_transfer requests is arranged; + + + optionally defining short delays after transfers ... using + the spi_transfer.delay_usecs setting; + + + whether the chipselect becomes inactive after a transfer and + any delay ... by using the spi_transfer.cs_change flag; + + + hinting whether the next message is likely to go to this same + device ... using the spi_transfer.cs_change flag on the last + transfer in that atomic group, and potentially saving costs + for chip deselect and select operations. + + - Follow standard kernel rules, and provide DMA-safe buffers in + your messages. That way controller drivers using DMA aren't forced + to make extra copies unless the hardware requires it (e.g. working + around hardware errata that force the use of bounce buffering). + + If standard dma_map_single() handling of these buffers is inappropriate, + you can use spi_message.is_dma_mapped to tell the controller driver + that you've already provided the relevant DMA addresses. + + - The basic I/O primitive is spi_async(). Async requests may be + issued in any context (irq handler, task, etc) and completion + is reported using a callback provided with the message. + After any detected error, the chip is deselected and processing + of that spi_message is aborted. + + - There are also synchronous wrappers like spi_sync(), and wrappers + like spi_read(), spi_write(), and spi_write_then_read(). These + may be issued only in contexts that may sleep, and they're all + clean (and small, and "optional") layers over spi_async(). + + - The spi_write_then_read() call, and convenience wrappers around + it, should only be used with small amounts of data where the + cost of an extra copy may be ignored. It's designed to support + common RPC-style requests, such as writing an eight bit command + and reading a sixteen bit response -- spi_w8r16() being one its + wrappers, doing exactly that. + +Some drivers may need to modify spi_device characteristics like the +transfer mode, wordsize, or clock rate. This is done with spi_setup(), +which would normally be called from probe() before the first I/O is +done to the device. + +While "spi_device" would be the bottom boundary of the driver, the +upper boundaries might include sysfs (especially for sensor readings), +the input layer, ALSA, networking, MTD, the character device framework, +or other Linux subsystems. + +Note that there are two types of memory your driver must manage as part +of interacting with SPI devices. + + - I/O buffers use the usual Linux rules, and must be DMA-safe. + You'd normally allocate them from the heap or free page pool. + Don't use the stack, or anything that's declared "static". + + - The spi_message and spi_transfer metadata used to glue those + I/O buffers into a group of protocol transactions. These can + be allocated anywhere it's convenient, including as part of + other allocate-once driver data structures. Zero-init these. + +If you like, spi_message_alloc() and spi_message_free() convenience +routines are available to allocate and zero-initialize an spi_message +with several transfers. + + +How do I write an "SPI Master Controller Driver"? +------------------------------------------------- +An SPI controller will probably be registered on the platform_bus; write +a driver to bind to the device, whichever bus is involved. + +The main task of this type of driver is to provide an "spi_master". +Use spi_alloc_master() to allocate the master, and class_get_devdata() +to get the driver-private data allocated for that device. + + struct spi_master *master; + struct CONTROLLER *c; + + master = spi_alloc_master(dev, sizeof *c); + if (!master) + return -ENODEV; + + c = class_get_devdata(&master->cdev); + +The driver will initialize the fields of that spi_master, including the +bus number (maybe the same as the platform device ID) and three methods +used to interact with the SPI core and SPI protocol drivers. It will +also initialize its own internal state. + + master->setup(struct spi_device *spi) + This sets up the device clock rate, SPI mode, and word sizes. + Drivers may change the defaults provided by board_info, and then + call spi_setup(spi) to invoke this routine. It may sleep. + + master->transfer(struct spi_device *spi, struct spi_message *message) + This must not sleep. Its responsibility is arrange that the + transfer happens and its complete() callback is issued; the two + will normally happen later, after other transfers complete. + + master->cleanup(struct spi_device *spi) + Your controller driver may use spi_device.controller_state to hold + state it dynamically associates with that device. If you do that, + be sure to provide the cleanup() method to free that state. + +The bulk of the driver will be managing the I/O queue fed by transfer(). + +That queue could be purely conceptual. For example, a driver used only +for low-frequency sensor acess might be fine using synchronous PIO. + +But the queue will probably be very real, using message->queue, PIO, +often DMA (especially if the root filesystem is in SPI flash), and +execution contexts like IRQ handlers, tasklets, or workqueues (such +as keventd). Your driver can be as fancy, or as simple, as you need. + + +THANKS TO +--------- +Contributors to Linux-SPI discussions include (in alphabetical order, +by last name): + +David Brownell +Russell King +Dmitry Pervushin +Stephen Street +Mark Underwood +Andrew Victor +Vitaly Wool + diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 50b9afa8ae6d..3cfd82a05b20 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -729,6 +729,8 @@ source "drivers/char/Kconfig" source "drivers/i2c/Kconfig" +source "drivers/spi/Kconfig" + source "drivers/hwmon/Kconfig" #source "drivers/l3/Kconfig" diff --git a/drivers/Kconfig b/drivers/Kconfig index 48f446d3c671..283c089537bc 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -44,6 +44,8 @@ source "drivers/char/Kconfig" source "drivers/i2c/Kconfig" +source "drivers/spi/Kconfig" + source "drivers/w1/Kconfig" source "drivers/hwmon/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 7fc3f0f08b29..7c45050ecd03 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_FUSION) += message/ obj-$(CONFIG_IEEE1394) += ieee1394/ obj-y += cdrom/ obj-$(CONFIG_MTD) += mtd/ +obj-$(CONFIG_SPI) += spi/ obj-$(CONFIG_PCCARD) += pcmcia/ obj-$(CONFIG_DIO) += dio/ obj-$(CONFIG_SBUS) += sbus/ diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 21d55ed4b88a..2c674023a6ac 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -11,6 +11,19 @@ menuconfig INPUT_TOUCHSCREEN if INPUT_TOUCHSCREEN +config TOUCHSCREEN_ADS7846 + tristate "ADS 7846 based touchscreens" + depends on SPI_MASTER + help + Say Y here if you have a touchscreen interface using the + ADS7846 controller, and your board-specific initialization + code includes that in its table of SPI devices. + + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ads7846. + config TOUCHSCREEN_BITSY tristate "Compaq iPAQ H3600 (Bitsy) touchscreen" depends on SA1100_BITSY diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 6842869c9a26..5e5557c43121 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -4,6 +4,7 @@ # Each configuration option enables a list of files. +obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o obj-$(CONFIG_TOUCHSCREEN_CORGI) += corgi_ts.o obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c new file mode 100644 index 000000000000..dd8c6a9ffc76 --- /dev/null +++ b/drivers/input/touchscreen/ads7846.c @@ -0,0 +1,625 @@ +/* + * ADS7846 based touchscreen and sensor driver + * + * Copyright (c) 2005 David Brownell + * + * Using code from: + * - corgi_ts.c + * Copyright (C) 2004-2005 Richard Purdie + * - omap_ts.[hc], ads7846.h, ts_osk.c + * Copyright (C) 2002 MontaVista Software + * Copyright (C) 2004 Texas Instruments + * Copyright (C) 2005 Dirk Behme + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/device.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> + +#ifdef CONFIG_ARM +#include <asm/mach-types.h> +#ifdef CONFIG_ARCH_OMAP +#include <asm/arch/gpio.h> +#endif + +#else +#define set_irq_type(irq,type) do{}while(0) +#endif + + +/* + * This code has been lightly tested on an ads7846. + * Support for ads7843 and ads7845 has only been stubbed in. + * + * Not yet done: investigate the values reported. Are x/y/pressure + * event values sane enough for X11? How accurate are the temperature + * and voltage readings? (System-specific calibration should support + * accuracy of 0.3 degrees C; otherwise it's 2.0 degrees.) + * + * app note sbaa036 talks in more detail about accurate sampling... + * that ought to help in situations like LCDs inducing noise (which + * can also be helped by using synch signals) and more generally. + */ + +#define TS_POLL_PERIOD msecs_to_jiffies(10) + +struct ts_event { + /* For portability, we can't read 12 bit values using SPI (which + * would make the controller deliver them as native byteorder u16 + * with msbs zeroed). Instead, we read them as two 8-byte values, + * which need byteswapping then range adjustment. + */ + __be16 x; + __be16 y; + __be16 z1, z2; +}; + +struct ads7846 { + struct input_dev input; + char phys[32]; + + struct spi_device *spi; + u16 model; + u16 vref_delay_usecs; + u16 x_plate_ohms; + + struct ts_event tc; + + struct spi_transfer xfer[8]; + struct spi_message msg; + + spinlock_t lock; + struct timer_list timer; /* P: lock */ + unsigned pendown:1; /* P: lock */ + unsigned pending:1; /* P: lock */ +// FIXME remove "irq_disabled" + unsigned irq_disabled:1; /* P: lock */ +}; + +/* leave chip selected when we're done, for quicker re-select? */ +#if 0 +#define CS_CHANGE(xfer) ((xfer).cs_change = 1) +#else +#define CS_CHANGE(xfer) ((xfer).cs_change = 0) +#endif + +/*--------------------------------------------------------------------------*/ + +/* The ADS7846 has touchscreen and other sensors. + * Earlier ads784x chips are somewhat compatible. + */ +#define ADS_START (1 << 7) +#define ADS_A2A1A0_d_y (1 << 4) /* differential */ +#define ADS_A2A1A0_d_z1 (3 << 4) /* differential */ +#define ADS_A2A1A0_d_z2 (4 << 4) /* differential */ +#define ADS_A2A1A0_d_x (5 << 4) /* differential */ +#define ADS_A2A1A0_temp0 (0 << 4) /* non-differential */ +#define ADS_A2A1A0_vbatt (2 << 4) /* non-differential */ +#define ADS_A2A1A0_vaux (6 << 4) /* non-differential */ +#define ADS_A2A1A0_temp1 (7 << 4) /* non-differential */ +#define ADS_8_BIT (1 << 3) +#define ADS_12_BIT (0 << 3) +#define ADS_SER (1 << 2) /* non-differential */ +#define ADS_DFR (0 << 2) /* differential */ +#define ADS_PD10_PDOWN (0 << 0) /* lowpower mode + penirq */ +#define ADS_PD10_ADC_ON (1 << 0) /* ADC on */ +#define ADS_PD10_REF_ON (2 << 0) /* vREF on + penirq */ +#define ADS_PD10_ALL_ON (3 << 0) /* ADC + vREF on */ + +#define MAX_12BIT ((1<<12)-1) + +/* leave ADC powered up (disables penirq) between differential samples */ +#define READ_12BIT_DFR(x) (ADS_START | ADS_A2A1A0_d_ ## x \ + | ADS_12_BIT | ADS_DFR) + +static const u8 read_y = READ_12BIT_DFR(y) | ADS_PD10_ADC_ON; +static const u8 read_z1 = READ_12BIT_DFR(z1) | ADS_PD10_ADC_ON; +static const u8 read_z2 = READ_12BIT_DFR(z2) | ADS_PD10_ADC_ON; +static const u8 read_x = READ_12BIT_DFR(x) | ADS_PD10_PDOWN; /* LAST */ + +/* single-ended samples need to first power up reference voltage; + * we leave both ADC and VREF powered + */ +#define READ_12BIT_SER(x) (ADS_START | ADS_A2A1A0_ ## x \ + | ADS_12_BIT | ADS_SER) + +static const u8 ref_on = READ_12BIT_DFR(x) | ADS_PD10_ALL_ON; +static const u8 ref_off = READ_12BIT_DFR(y) | ADS_PD10_PDOWN; + +/*--------------------------------------------------------------------------*/ + +/* + * Non-touchscreen sensors only use single-ended conversions. + */ + +struct ser_req { + u8 command; + u16 scratch; + __be16 sample; + struct spi_message msg; + struct spi_transfer xfer[6]; +}; + +static int ads7846_read12_ser(struct device *dev, unsigned command) +{ + struct spi_device *spi = to_spi_device(dev); + struct ads7846 *ts = dev_get_drvdata(dev); + struct ser_req *req = kzalloc(sizeof *req, SLAB_KERNEL); + int status; + int sample; + int i; + + if (!req) + return -ENOMEM; + + INIT_LIST_HEAD(&req->msg.transfers); + + /* activate reference, so it has time to settle; */ + req->xfer[0].tx_buf = &ref_on; + req->xfer[0].len = 1; + req->xfer[1].rx_buf = &req->scratch; + req->xfer[1].len = 2; + + /* + * for external VREF, 0 usec (and assume it's always on); + * for 1uF, use 800 usec; + * no cap, 100 usec. + */ + req->xfer[1].delay_usecs = ts->vref_delay_usecs; + + /* take sample */ + req->command = (u8) command; + req->xfer[2].tx_buf = &req->command; + req->xfer[2].len = 1; + req->xfer[3].rx_buf = &req->sample; + req->xfer[3].len = 2; + + /* REVISIT: take a few more samples, and compare ... */ + + /* turn off reference */ + req->xfer[4].tx_buf = &ref_off; + req->xfer[4].len = 1; + req->xfer[5].rx_buf = &req->scratch; + req->xfer[5].len = 2; + + CS_CHANGE(req->xfer[5]); + + /* group all the transfers together, so we can't interfere with + * reading touchscreen state; disable penirq while sampling + */ + for (i = 0; i < 6; i++) + spi_message_add_tail(&req->xfer[i], &req->msg); + + disable_irq(spi->irq); + status = spi_sync(spi, &req->msg); + enable_irq(spi->irq); + + if (req->msg.status) + status = req->msg.status; + sample = be16_to_cpu(req->sample); + sample = sample >> 4; + kfree(req); + + return status ? status : sample; +} + +#define SHOW(name) static ssize_t \ +name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + ssize_t v = ads7846_read12_ser(dev, \ + READ_12BIT_SER(name) | ADS_PD10_ALL_ON); \ + if (v < 0) \ + return v; \ + return sprintf(buf, "%u\n", (unsigned) v); \ +} \ +static DEVICE_ATTR(name, S_IRUGO, name ## _show, NULL); + +SHOW(temp0) +SHOW(temp1) +SHOW(vaux) +SHOW(vbatt) + +/*--------------------------------------------------------------------------*/ + +/* + * PENIRQ only kicks the timer. The timer only reissues the SPI transfer, + * to retrieve touchscreen status. + * + * The SPI transfer completion callback does the real work. It reports + * touchscreen events and reactivates the timer (or IRQ) as appropriate. + */ + +static void ads7846_rx(void *ads) +{ + struct ads7846 *ts = ads; + unsigned Rt; + unsigned sync = 0; + u16 x, y, z1, z2; + unsigned long flags; + + /* adjust: 12 bit samples (left aligned), built from + * two 8 bit values writen msb-first. + */ + x = be16_to_cpu(ts->tc.x) >> 4; + y = be16_to_cpu(ts->tc.y) >> 4; + z1 = be16_to_cpu(ts->tc.z1) >> 4; + z2 = be16_to_cpu(ts->tc.z2) >> 4; + + /* range filtering */ + if (x == MAX_12BIT) + x = 0; + + if (x && z1 && ts->spi->dev.power.power_state.event == PM_EVENT_ON) { + /* compute touch pressure resistance using equation #2 */ + Rt = z2; + Rt -= z1; + Rt *= x; + Rt *= ts->x_plate_ohms; + Rt /= z1; + Rt = (Rt + 2047) >> 12; + } else + Rt = 0; + + /* NOTE: "pendown" is inferred from pressure; we don't rely on + * being able to check nPENIRQ status, or "friendly" trigger modes + * (both-edges is much better than just-falling or low-level). + * + * REVISIT: some boards may require reading nPENIRQ; it's + * needed on 7843. and 7845 reads pressure differently... + * + * REVISIT: the touchscreen might not be connected; this code + * won't notice that, even if nPENIRQ never fires ... + */ + if (!ts->pendown && Rt != 0) { + input_report_key(&ts->input, BTN_TOUCH, 1); + sync = 1; + } else if (ts->pendown && Rt == 0) { + input_report_key(&ts->input, BTN_TOUCH, 0); + sync = 1; + } + + if (Rt) { + input_report_abs(&ts->input, ABS_X, x); + input_report_abs(&ts->input, ABS_Y, y); + input_report_abs(&ts->input, ABS_PRESSURE, Rt); + sync = 1; + } + if (sync) + input_sync(&ts->input); + +#ifdef VERBOSE + if (Rt || ts->pendown) + pr_debug("%s: %d/%d/%d%s\n", ts->spi->dev.bus_id, + x, y, Rt, Rt ? "" : " UP"); +#endif + + /* don't retrigger while we're suspended */ + spin_lock_irqsave(&ts->lock, flags); + + ts->pendown = (Rt != 0); + ts->pending = 0; + + if (ts->spi->dev.power.power_state.event == PM_EVENT_ON) { + if (ts->pendown) + mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD); + else if (ts->irq_disabled) { + ts->irq_disabled = 0; + enable_irq(ts->spi->irq); + } + } + + spin_unlock_irqrestore(&ts->lock, flags); +} + +static void ads7846_timer(unsigned long handle) +{ + struct ads7846 *ts = (void *)handle; + int status = 0; + unsigned long flags; + + spin_lock_irqsave(&ts->lock, flags); + if (!ts->pending) { + ts->pending = 1; + if (!ts->irq_disabled) { + ts->irq_disabled = 1; + disable_irq(ts->spi->irq); + } + status = spi_async(ts->spi, &ts->msg); + if (status) + dev_err(&ts->spi->dev, "spi_async --> %d\n", + status); + } + spin_unlock_irqrestore(&ts->lock, flags); +} + +static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs) +{ + ads7846_timer((unsigned long) handle); + return IRQ_HANDLED; +} + +/*--------------------------------------------------------------------------*/ + +static int +ads7846_suspend(struct spi_device *spi, pm_message_t message) +{ + struct ads7846 *ts = dev_get_drvdata(&spi->dev); + unsigned long flags; + + spin_lock_irqsave(&ts->lock, flags); + + spi->dev.power.power_state = message; + + /* are we waiting for IRQ, or polling? */ + if (!ts->pendown) { + if (!ts->irq_disabled) { + ts->irq_disabled = 1; + disable_irq(ts->spi->irq); + } + } else { + /* polling; force a final SPI completion; + * that will clean things up neatly + */ + if (!ts->pending) + mod_timer(&ts->timer, jiffies); + + while (ts->pendown || ts->pending) { + spin_unlock_irqrestore(&ts->lock, flags); + udelay(10); + spin_lock_irqsave(&ts->lock, flags); + } + } + + /* we know the chip's in lowpower mode since we always + * leave it that way after every request + */ + + spin_unlock_irqrestore(&ts->lock, flags); + return 0; +} + +static int ads7846_resume(struct spi_device *spi) +{ + struct ads7846 *ts = dev_get_drvdata(&spi->dev); + + ts->irq_disabled = 0; + enable_irq(ts->spi->irq); + spi->dev.power.power_state = PMSG_ON; + return 0; +} + +static int __devinit ads7846_probe(struct spi_device *spi) +{ + struct ads7846 *ts; + struct ads7846_platform_data *pdata = spi->dev.platform_data; + struct spi_transfer *x; + int i; + + if (!spi->irq) { + dev_dbg(&spi->dev, "no IRQ?\n"); + return -ENODEV; + } + + if (!pdata) { + dev_dbg(&spi->dev, "no platform data?\n"); + return -ENODEV; + } + + /* don't exceed max specified sample rate */ + if (spi->max_speed_hz > (125000 * 16)) { + dev_dbg(&spi->dev, "f(sample) %d KHz?\n", + (spi->max_speed_hz/16)/1000); + return -EINVAL; + } + + /* We'd set the wordsize to 12 bits ... except that some controllers + * will then treat the 8 bit command words as 12 bits (and drop the + * four MSBs of the 12 bit result). Result: inputs must be shifted + * to discard the four garbage LSBs. + */ + + if (!(ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL))) + return -ENOMEM; + + dev_set_drvdata(&spi->dev, ts); + + ts->spi = spi; + spi->dev.power.power_state = PMSG_ON; + + init_timer(&ts->timer); + ts->timer.data = (unsigned long) ts; + ts->timer.function = ads7846_timer; + + ts->model = pdata->model ? : 7846; + ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100; + ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; + + init_input_dev(&ts->input); + + ts->input.dev = &spi->dev; + ts->input.name = "ADS784x Touchscreen"; + snprintf(ts->phys, sizeof ts->phys, "%s/input0", spi->dev.bus_id); + ts->input.phys = ts->phys; + + ts->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + ts->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(&ts->input, ABS_X, + pdata->x_min ? : 0, + pdata->x_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(&ts->input, ABS_Y, + pdata->y_min ? : 0, + pdata->y_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(&ts->input, ABS_PRESSURE, + pdata->pressure_min, pdata->pressure_max, 0, 0); + + input_register_device(&ts->input); + + /* set up the transfers to read touchscreen state; this assumes we + * use formula #2 for pressure, not #3. + */ + x = ts->xfer; + + /* y- still on; turn on only y+ (and ADC) */ + x->tx_buf = &read_y; + x->len = 1; + x++; + x->rx_buf = &ts->tc.y; + x->len = 2; + x++; + + /* turn y+ off, x- on; we'll use formula #2 */ + if (ts->model == 7846) { + x->tx_buf = &read_z1; + x->len = 1; + x++; + x->rx_buf = &ts->tc.z1; + x->len = 2; + x++; + + x->tx_buf = &read_z2; + x->len = 1; + x++; + x->rx_buf = &ts->tc.z2; + x->len = 2; + x++; + } + + /* turn y- off, x+ on, then leave in lowpower */ + x->tx_buf = &read_x; + x->len = 1; + x++; + x->rx_buf = &ts->tc.x; + x->len = 2; + x++; + + CS_CHANGE(x[-1]); + + for (i = 0; i < x - ts->xfer; i++) + spi_message_add_tail(&ts->xfer[i], &ts->msg); + ts->msg.complete = ads7846_rx; + ts->msg.context = ts; + + if (request_irq(spi->irq, ads7846_irq, SA_SAMPLE_RANDOM, + spi->dev.bus_id, ts)) { + dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); + input_unregister_device(&ts->input); + kfree(ts); + return -EBUSY; + } + set_irq_type(spi->irq, IRQT_FALLING); + + dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq); + + /* take a first sample, leaving nPENIRQ active; avoid + * the touchscreen, in case it's not connected. + */ + (void) ads7846_read12_ser(&spi->dev, + READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON); + + /* ads7843/7845 don't have temperature sensors, and + * use the other sensors a bit differently too + */ + if (ts->model == 7846) { + device_create_file(&spi->dev, &dev_attr_temp0); + device_create_file(&spi->dev, &dev_attr_temp1); + } + if (ts->model != 7845) + device_create_file(&spi->dev, &dev_attr_vbatt); + device_create_file(&spi->dev, &dev_attr_vaux); + + return 0; +} + +static int __devexit ads7846_remove(struct spi_device *spi) +{ + struct ads7846 *ts = dev_get_drvdata(&spi->dev); + + ads7846_suspend(spi, PMSG_SUSPEND); + free_irq(ts->spi->irq, ts); + if (ts->irq_disabled) + enable_irq(ts->spi->irq); + + if (ts->model == 7846) { + device_remove_file(&spi->dev, &dev_attr_temp0); + device_remove_file(&spi->dev, &dev_attr_temp1); + } + if (ts->model != 7845) + device_remove_file(&spi->dev, &dev_attr_vbatt); + device_remove_file(&spi->dev, &dev_attr_vaux); + + input_unregister_device(&ts->input); + kfree(ts); + + dev_dbg(&spi->dev, "unregistered touchscreen\n"); + return 0; +} + +static struct spi_driver ads7846_driver = { + .driver = { + .name = "ads7846", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = ads7846_probe, + .remove = __devexit_p(ads7846_remove), + .suspend = ads7846_suspend, + .resume = ads7846_resume, +}; + +static int __init ads7846_init(void) +{ + /* grr, board-specific init should stay out of drivers!! */ + +#ifdef CONFIG_ARCH_OMAP + if (machine_is_omap_osk()) { + /* GPIO4 = PENIRQ; GPIO6 = BUSY */ + omap_request_gpio(4); + omap_set_gpio_direction(4, 1); + omap_request_gpio(6); + omap_set_gpio_direction(6, 1); + } + // also TI 1510 Innovator, bitbanging through FPGA + // also Nokia 770 + // also Palm Tungsten T2 +#endif + + // PXA: + // also Dell Axim X50 + // also HP iPaq H191x/H192x/H415x/H435x + // also Intel Lubbock (additional to UCB1400; as temperature sensor) + // also Sharp Zaurus C7xx, C8xx (corgi/sheperd/husky) + + // Atmel at91sam9261-EK uses ads7843 + + // also various AMD Au1x00 devel boards + + return spi_register_driver(&ads7846_driver); +} +module_init(ads7846_init); + +static void __exit ads7846_exit(void) +{ + spi_unregister_driver(&ads7846_driver); + +#ifdef CONFIG_ARCH_OMAP + if (machine_is_omap_osk()) { + omap_free_gpio(4); + omap_free_gpio(6); + } +#endif + +} +module_exit(ads7846_exit); + +MODULE_DESCRIPTION("ADS7846 TouchScreen Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 9a2aa4033c6a..5038e90ceb12 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -47,6 +47,22 @@ config MTD_MS02NV accelerator. Say Y here if you have a DECstation 5000/2x0 or a DECsystem 5900 equipped with such a module. +config MTD_DATAFLASH + tristate "Support for AT45xxx DataFlash" + depends on MTD && SPI_MASTER && EXPERIMENTAL + help + This enables access to AT45xxx DataFlash chips, using SPI. + Sometimes DataFlash chips are packaged inside MMC-format + cards; at this writing, the MMC stack won't handle those. + +config MTD_M25P80 + tristate "Support for M25 SPI Flash" + depends on MTD && SPI_MASTER && EXPERIMENTAL + help + This enables access to ST M25P80 and similar SPI flash chips, + used for program and data storage. Set up your spi devices + with the right board-specific platform data. + config MTD_SLRAM tristate "Uncached system RAM" depends on MTD diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index e38db348057d..7c5ed2178380 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -23,3 +23,5 @@ obj-$(CONFIG_MTD_MTDRAM) += mtdram.o obj-$(CONFIG_MTD_LART) += lart.o obj-$(CONFIG_MTD_BLKMTD) += blkmtd.o obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o +obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o +obj-$(CONFIG_MTD_M25P80) += m25p80.o diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c new file mode 100644 index 000000000000..d5f24089be71 --- /dev/null +++ b/drivers/mtd/devices/m25p80.c @@ -0,0 +1,582 @@ +/* + * MTD SPI driver for ST M25Pxx flash chips + * + * Author: Mike Lavender, mike@steroidmicros.com + * + * Copyright (c) 2005, Intec Automation Inc. + * + * Some parts are based on lart.c by Abraham Van Der Merwe + * + * Cleaned up and generalized based on mtd_dataflash.c + * + * This code is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/interrupt.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/semaphore.h> + + +/* NOTE: AT 25F and SST 25LF series are very similar, + * but commands for sector erase and chip id differ... + */ + +#define FLASH_PAGESIZE 256 + +/* Flash opcodes. */ +#define OPCODE_WREN 6 /* Write enable */ +#define OPCODE_RDSR 5 /* Read status register */ +#define OPCODE_READ 3 /* Read data bytes */ +#define OPCODE_PP 2 /* Page program */ +#define OPCODE_SE 0xd8 /* Sector erase */ +#define OPCODE_RES 0xab /* Read Electronic Signature */ +#define OPCODE_RDID 0x9f /* Read JEDEC ID */ + +/* Status Register bits. */ +#define SR_WIP 1 /* Write in progress */ +#define SR_WEL 2 /* Write enable latch */ +#define SR_BP0 4 /* Block protect 0 */ +#define SR_BP1 8 /* Block protect 1 */ +#define SR_BP2 0x10 /* Block protect 2 */ +#define SR_SRWD 0x80 /* SR write protect */ + +/* Define max times to check status register before we give up. */ +#define MAX_READY_WAIT_COUNT 100000 + + +#ifdef CONFIG_MTD_PARTITIONS +#define mtd_has_partitions() (1) +#else +#define mtd_has_partitions() (0) +#endif + +/****************************************************************************/ + +struct m25p { + struct spi_device *spi; + struct semaphore lock; + struct mtd_info mtd; + unsigned partitioned; + u8 command[4]; +}; + +static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd) +{ + return container_of(mtd, struct m25p, mtd); +} + +/****************************************************************************/ + +/* + * Internal helper functions + */ + +/* + * Read the status register, returning its value in the location + * Return the status register value. + * Returns negative if error occurred. + */ +static int read_sr(struct m25p *flash) +{ + ssize_t retval; + u8 code = OPCODE_RDSR; + u8 val; + + retval = spi_write_then_read(flash->spi, &code, 1, &val, 1); + + if (retval < 0) { + dev_err(&flash->spi->dev, "error %d reading SR\n", + (int) retval); + return retval; + } + + return val; +} + + +/* + * Set write enable latch with Write Enable command. + * Returns negative if error occurred. + */ +static inline int write_enable(struct m25p *flash) +{ + u8 code = OPCODE_WREN; + + return spi_write_then_read(flash->spi, &code, 1, NULL, 0); +} + + +/* + * Service routine to read status register until ready, or timeout occurs. + * Returns non-zero if error. + */ +static int wait_till_ready(struct m25p *flash) +{ + int count; + int sr; + + /* one chip guarantees max 5 msec wait here after page writes, + * but potentially three seconds (!) after page erase. + */ + for (count = 0; count < MAX_READY_WAIT_COUNT; count++) { + if ((sr = read_sr(flash)) < 0) + break; + else if (!(sr & SR_WIP)) + return 0; + + /* REVISIT sometimes sleeping would be best */ + } + + return 1; +} + + +/* + * Erase one sector of flash memory at offset ``offset'' which is any + * address within the sector which should be erased. + * + * Returns 0 if successful, non-zero otherwise. + */ +static int erase_sector(struct m25p *flash, u32 offset) +{ + DEBUG(MTD_DEBUG_LEVEL3, "%s: %s at 0x%08x\n", flash->spi->dev.bus_id, + __FUNCTION__, offset); + + /* Wait until finished previous write command. */ + if (wait_till_ready(flash)) + return 1; + + /* Send write enable, then erase commands. */ + write_enable(flash); + + /* Set up command buffer. */ + flash->command[0] = OPCODE_SE; + flash->command[1] = offset >> 16; + flash->command[2] = offset >> 8; + flash->command[3] = offset; + + spi_write(flash->spi, flash->command, sizeof(flash->command)); + + return 0; +} + +/****************************************************************************/ + +/* + * MTD implementation + */ + +/* + * Erase an address range on the flash chip. The address range may extend + * one or more erase sectors. Return an error is there is a problem erasing. + */ +static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + struct m25p *flash = mtd_to_m25p(mtd); + u32 addr,len; + + DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n", + flash->spi->dev.bus_id, __FUNCTION__, "at", + (u32)instr->addr, instr->len); + + /* sanity checks */ + if (instr->addr + instr->len > flash->mtd.size) + return -EINVAL; + if ((instr->addr % mtd->erasesize) != 0 + || (instr->len % mtd->erasesize) != 0) { + return -EINVAL; + } + + addr = instr->addr; + len = instr->len; + + down(&flash->lock); + + /* now erase those sectors */ + while (len) { + if (erase_sector(flash, addr)) { + instr->state = MTD_ERASE_FAILED; + up(&flash->lock); + return -EIO; + } + + addr += mtd->erasesize; + len -= mtd->erasesize; + } + + up(&flash->lock); + + instr->state = MTD_ERASE_DONE; + mtd_erase_callback(instr); + + return 0; +} + +/* + * Read an address range from the flash chip. The address range + * may be any size provided it is within the physical boundaries. + */ +static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct m25p *flash = mtd_to_m25p(mtd); + struct spi_transfer t[2]; + struct spi_message m; + + DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n", + flash->spi->dev.bus_id, __FUNCTION__, "from", + (u32)from, len); + + /* sanity checks */ + if (!len) + return 0; + + if (from + len > flash->mtd.size) + return -EINVAL; + + spi_message_init(&m); + memset(t, 0, (sizeof t)); + + t[0].tx_buf = flash->command; + t[0].len = sizeof(flash->command); + spi_message_add_tail(&t[0], &m); + + t[1].rx_buf = buf; + t[1].len = len; + spi_message_add_tail(&t[1], &m); + + /* Byte count starts at zero. */ + if (retlen) + *retlen = 0; + + down(&flash->lock); + + /* Wait till previous write/erase is done. */ + if (wait_till_ready(flash)) { + /* REVISIT status return?? */ + up(&flash->lock); + return 1; + } + + /* NOTE: OPCODE_FAST_READ (if available) is faster... */ + + /* Set up the write data buffer. */ + flash->command[0] = OPCODE_READ; + flash->command[1] = from >> 16; + flash->command[2] = from >> 8; + flash->command[3] = from; + + spi_sync(flash->spi, &m); + + *retlen = m.actual_length - sizeof(flash->command); + + up(&flash->lock); + + return 0; +} + +/* + * Write an address range to the flash chip. Data must be written in + * FLASH_PAGESIZE chunks. The address range may be any size provided + * it is within the physical boundaries. + */ +static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct m25p *flash = mtd_to_m25p(mtd); + u32 page_offset, page_size; + struct spi_transfer t[2]; + struct spi_message m; + + DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n", + flash->spi->dev.bus_id, __FUNCTION__, "to", + (u32)to, len); + + if (retlen) + *retlen = 0; + + /* sanity checks */ + if (!len) + return(0); + + if (to + len > flash->mtd.size) + return -EINVAL; + + spi_message_init(&m); + memset(t, 0, (sizeof t)); + + t[0].tx_buf = flash->command; + t[0].len = sizeof(flash->command); + spi_message_add_tail(&t[0], &m); + + t[1].tx_buf = buf; + spi_message_add_tail(&t[1], &m); + + down(&flash->lock); + + /* Wait until finished previous write command. */ + if (wait_till_ready(flash)) + return 1; + + write_enable(flash); + + /* Set up the opcode in the write buffer. */ + flash->command[0] = OPCODE_PP; + flash->command[1] = to >> 16; + flash->command[2] = to >> 8; + flash->command[3] = to; + + /* what page do we start with? */ + page_offset = to % FLASH_PAGESIZE; + + /* do all the bytes fit onto one page? */ + if (page_offset + len <= FLASH_PAGESIZE) { + t[1].len = len; + + spi_sync(flash->spi, &m); + + *retlen = m.actual_length - sizeof(flash->command); + } else { + u32 i; + + /* the size of data remaining on the first page */ + page_size = FLASH_PAGESIZE - page_offset; + + t[1].len = page_size; + spi_sync(flash->spi, &m); + + *retlen = m.actual_length - sizeof(flash->command); + + /* write everything in PAGESIZE chunks */ + for (i = page_size; i < len; i += page_size) { + page_size = len - i; + if (page_size > FLASH_PAGESIZE) + page_size = FLASH_PAGESIZE; + + /* write the next page to flash */ + flash->command[1] = (to + i) >> 16; + flash->command[2] = (to + i) >> 8; + flash->command[3] = (to + i); + + t[1].tx_buf = buf + i; + t[1].len = page_size; + + wait_till_ready(flash); + + write_enable(flash); + + spi_sync(flash->spi, &m); + + if (retlen) + *retlen += m.actual_length + - sizeof(flash->command); + } + } + + up(&flash->lock); + + return 0; +} + + +/****************************************************************************/ + +/* + * SPI device driver setup and teardown + */ + +struct flash_info { + char *name; + u8 id; + u16 jedec_id; + unsigned sector_size; + unsigned n_sectors; +}; + +static struct flash_info __devinitdata m25p_data [] = { + /* REVISIT: fill in JEDEC ids, for parts that have them */ + { "m25p05", 0x05, 0x0000, 32 * 1024, 2 }, + { "m25p10", 0x10, 0x0000, 32 * 1024, 4 }, + { "m25p20", 0x11, 0x0000, 64 * 1024, 4 }, + { "m25p40", 0x12, 0x0000, 64 * 1024, 8 }, + { "m25p80", 0x13, 0x0000, 64 * 1024, 16 }, + { "m25p16", 0x14, 0x0000, 64 * 1024, 32 }, + { "m25p32", 0x15, 0x0000, 64 * 1024, 64 }, + { "m25p64", 0x16, 0x2017, 64 * 1024, 128 }, +}; + +/* + * board specific setup should have ensured the SPI clock used here + * matches what the READ command supports, at least until this driver + * understands FAST_READ (for clocks over 25 MHz). + */ +static int __devinit m25p_probe(struct spi_device *spi) +{ + struct flash_platform_data *data; + struct m25p *flash; + struct flash_info *info; + unsigned i; + + /* Platform data helps sort out which chip type we have, as + * well as how this board partitions it. + */ + data = spi->dev.platform_data; + if (!data || !data->type) { + /* FIXME some chips can identify themselves with RES + * or JEDEC get-id commands. Try them ... + */ + DEBUG(MTD_DEBUG_LEVEL1, "%s: no chip id\n", + flash->spi->dev.bus_id); + return -ENODEV; + } + + for (i = 0, info = m25p_data; i < ARRAY_SIZE(m25p_data); i++, info++) { + if (strcmp(data->type, info->name) == 0) + break; + } + if (i == ARRAY_SIZE(m25p_data)) { + DEBUG(MTD_DEBUG_LEVEL1, "%s: unrecognized id %s\n", + flash->spi->dev.bus_id, data->type); + return -ENODEV; + } + + flash = kzalloc(sizeof *flash, SLAB_KERNEL); + if (!flash) + return -ENOMEM; + + flash->spi = spi; + init_MUTEX(&flash->lock); + dev_set_drvdata(&spi->dev, flash); + + if (data->name) + flash->mtd.name = data->name; + else + flash->mtd.name = spi->dev.bus_id; + + flash->mtd.type = MTD_NORFLASH; + flash->mtd.flags = MTD_CAP_NORFLASH; + flash->mtd.size = info->sector_size * info->n_sectors; + flash->mtd.erasesize = info->sector_size; + flash->mtd.erase = m25p80_erase; + flash->mtd.read = m25p80_read; + flash->mtd.write = m25p80_write; + + dev_info(&spi->dev, "%s (%d Kbytes)\n", info->name, + flash->mtd.size / 1024); + + DEBUG(MTD_DEBUG_LEVEL2, + "mtd .name = %s, .size = 0x%.8x (%uM) " + ".erasesize = 0x%.8x (%uK) .numeraseregions = %d\n", + flash->mtd.name, + flash->mtd.size, flash->mtd.size / (1024*1024), + flash->mtd.erasesize, flash->mtd.erasesize / 1024, + flash->mtd.numeraseregions); + + if (flash->mtd.numeraseregions) + for (i = 0; i < flash->mtd.numeraseregions; i++) + DEBUG(MTD_DEBUG_LEVEL2, + "mtd.eraseregions[%d] = { .offset = 0x%.8x, " + ".erasesize = 0x%.8x (%uK), " + ".numblocks = %d }\n", + i, flash->mtd.eraseregions[i].offset, + flash->mtd.eraseregions[i].erasesize, + flash->mtd.eraseregions[i].erasesize / 1024, + flash->mtd.eraseregions[i].numblocks); + + + /* partitions should match sector boundaries; and it may be good to + * use readonly partitions for writeprotected sectors (BP2..BP0). + */ + if (mtd_has_partitions()) { + struct mtd_partition *parts = NULL; + int nr_parts = 0; + +#ifdef CONFIG_MTD_CMDLINE_PARTS + static const char *part_probes[] = { "cmdlinepart", NULL, }; + + nr_parts = parse_mtd_partitions(&flash->mtd, + part_probes, &parts, 0); +#endif + + if (nr_parts <= 0 && data && data->parts) { + parts = data->parts; + nr_parts = data->nr_parts; + } + + if (nr_parts > 0) { + for (i = 0; i < data->nr_parts; i++) { + DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = " + "{.name = %s, .offset = 0x%.8x, " + ".size = 0x%.8x (%uK) }\n", + i, data->parts[i].name, + data->parts[i].offset, + data->parts[i].size, + data->parts[i].size / 1024); + } + flash->partitioned = 1; + return add_mtd_partitions(&flash->mtd, parts, nr_parts); + } + } else if (data->nr_parts) + dev_warn(&spi->dev, "ignoring %d default partitions on %s\n", + data->nr_parts, data->name); + + return add_mtd_device(&flash->mtd) == 1 ? -ENODEV : 0; +} + + +static int __devexit m25p_remove(struct spi_device *spi) +{ + struct m25p *flash = dev_get_drvdata(&spi->dev); + int status; + + /* Clean up MTD stuff. */ + if (mtd_has_partitions() && flash->partitioned) + status = del_mtd_partitions(&flash->mtd); + else + status = del_mtd_device(&flash->mtd); + if (status == 0) + kfree(flash); + return 0; +} + + +static struct spi_driver m25p80_driver = { + .driver = { + .name = "m25p80", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = m25p_probe, + .remove = __devexit_p(m25p_remove), +}; + + +static int m25p80_init(void) +{ + return spi_register_driver(&m25p80_driver); +} + + +static void m25p80_exit(void) +{ + spi_unregister_driver(&m25p80_driver); +} + + +module_init(m25p80_init); +module_exit(m25p80_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mike Lavender"); +MODULE_DESCRIPTION("MTD SPI driver for ST M25Pxx flash chips"); diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c new file mode 100644 index 000000000000..155737e7483f --- /dev/null +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -0,0 +1,629 @@ +/* + * Atmel AT45xxx DataFlash MTD driver for lightweight SPI framework + * + * Largely derived from at91_dataflash.c: + * Copyright (C) 2003-2005 SAN People (Pty) Ltd + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. +*/ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + + +/* + * DataFlash is a kind of SPI flash. Most AT45 chips have two buffers in + * each chip, which may be used for double buffered I/O; but this driver + * doesn't (yet) use these for any kind of i/o overlap or prefetching. + * + * Sometimes DataFlash is packaged in MMC-format cards, although the + * MMC stack can't use SPI (yet), or distinguish between MMC and DataFlash + * protocols during enumeration. + */ + +#define CONFIG_DATAFLASH_WRITE_VERIFY + +/* reads can bypass the buffers */ +#define OP_READ_CONTINUOUS 0xE8 +#define OP_READ_PAGE 0xD2 + +/* group B requests can run even while status reports "busy" */ +#define OP_READ_STATUS 0xD7 /* group B */ + +/* move data between host and buffer */ +#define OP_READ_BUFFER1 0xD4 /* group B */ +#define OP_READ_BUFFER2 0xD6 /* group B */ +#define OP_WRITE_BUFFER1 0x84 /* group B */ +#define OP_WRITE_BUFFER2 0x87 /* group B */ + +/* erasing flash */ +#define OP_ERASE_PAGE 0x81 +#define OP_ERASE_BLOCK 0x50 + +/* move data between buffer and flash */ +#define OP_TRANSFER_BUF1 0x53 +#define OP_TRANSFER_BUF2 0x55 +#define OP_MREAD_BUFFER1 0xD4 +#define OP_MREAD_BUFFER2 0xD6 +#define OP_MWERASE_BUFFER1 0x83 +#define OP_MWERASE_BUFFER2 0x86 +#define OP_MWRITE_BUFFER1 0x88 /* sector must be pre-erased */ +#define OP_MWRITE_BUFFER2 0x89 /* sector must be pre-erased */ + +/* write to buffer, then write-erase to flash */ +#define OP_PROGRAM_VIA_BUF1 0x82 +#define OP_PROGRAM_VIA_BUF2 0x85 + +/* compare buffer to flash */ +#define OP_COMPARE_BUF1 0x60 +#define OP_COMPARE_BUF2 0x61 + +/* read flash to buffer, then write-erase to flash */ +#define OP_REWRITE_VIA_BUF1 0x58 +#define OP_REWRITE_VIA_BUF2 0x59 + +/* newer chips report JEDEC manufacturer and device IDs; chip + * serial number and OTP bits; and per-sector writeprotect. + */ +#define OP_READ_ID 0x9F +#define OP_READ_SECURITY 0x77 +#define OP_WRITE_SECURITY 0x9A /* OTP bits */ + + +struct dataflash { + u8 command[4]; + char name[24]; + + unsigned partitioned:1; + + unsigned short page_offset; /* offset in flash address */ + unsigned int page_size; /* of bytes per page */ + + struct semaphore lock; + struct spi_device *spi; + + struct mtd_info mtd; +}; + +#ifdef CONFIG_MTD_PARTITIONS +#define mtd_has_partitions() (1) +#else +#define mtd_has_partitions() (0) +#endif + +/* ......................................................................... */ + +/* + * Return the status of the DataFlash device. + */ +static inline int dataflash_status(struct spi_device *spi) +{ + /* NOTE: at45db321c over 25 MHz wants to write + * a dummy byte after the opcode... + */ + return spi_w8r8(spi, OP_READ_STATUS); +} + +/* + * Poll the DataFlash device until it is READY. + * This usually takes 5-20 msec or so; more for sector erase. + */ +static int dataflash_waitready(struct spi_device *spi) +{ + int status; + + for (;;) { + status = dataflash_status(spi); + if (status < 0) { + DEBUG(MTD_DEBUG_LEVEL1, "%s: status %d?\n", + spi->dev.bus_id, status); + status = 0; + } + + if (status & (1 << 7)) /* RDY/nBSY */ + return status; + + msleep(3); + } +} + +/* ......................................................................... */ + +/* + * Erase pages of flash. + */ +static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + struct dataflash *priv = (struct dataflash *)mtd->priv; + struct spi_device *spi = priv->spi; + struct spi_transfer x = { .tx_dma = 0, }; + struct spi_message msg; + unsigned blocksize = priv->page_size << 3; + u8 *command; + + DEBUG(MTD_DEBUG_LEVEL2, "%s: erase addr=0x%x len 0x%x\n", + spi->dev.bus_id, + instr->addr, instr->len); + + /* Sanity checks */ + if ((instr->addr + instr->len) > mtd->size + || (instr->len % priv->page_size) != 0 + || (instr->addr % priv->page_size) != 0) + return -EINVAL; + + spi_message_init(&msg); + + x.tx_buf = command = priv->command; + x.len = 4; + spi_message_add_tail(&x, &msg); + + down(&priv->lock); + while (instr->len > 0) { + unsigned int pageaddr; + int status; + int do_block; + + /* Calculate flash page address; use block erase (for speed) if + * we're at a block boundary and need to erase the whole block. + */ + pageaddr = instr->addr / priv->page_size; + do_block = (pageaddr & 0x7) == 0 && instr->len <= blocksize; + pageaddr = pageaddr << priv->page_offset; + + command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE; + command[1] = (u8)(pageaddr >> 16); + command[2] = (u8)(pageaddr >> 8); + command[3] = 0; + + DEBUG(MTD_DEBUG_LEVEL3, "ERASE %s: (%x) %x %x %x [%i]\n", + do_block ? "block" : "page", + command[0], command[1], command[2], command[3], + pageaddr); + + status = spi_sync(spi, &msg); + (void) dataflash_waitready(spi); + + if (status < 0) { + printk(KERN_ERR "%s: erase %x, err %d\n", + spi->dev.bus_id, pageaddr, status); + /* REVISIT: can retry instr->retries times; or + * giveup and instr->fail_addr = instr->addr; + */ + continue; + } + + if (do_block) { + instr->addr += blocksize; + instr->len -= blocksize; + } else { + instr->addr += priv->page_size; + instr->len -= priv->page_size; + } + } + up(&priv->lock); + + /* Inform MTD subsystem that erase is complete */ + instr->state = MTD_ERASE_DONE; + mtd_erase_callback(instr); + + return 0; +} + +/* + * Read from the DataFlash device. + * from : Start offset in flash device + * len : Amount to read + * retlen : About of data actually read + * buf : Buffer containing the data + */ +static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct dataflash *priv = (struct dataflash *)mtd->priv; + struct spi_transfer x[2] = { { .tx_dma = 0, }, }; + struct spi_message msg; + unsigned int addr; + u8 *command; + int status; + + DEBUG(MTD_DEBUG_LEVEL2, "%s: read 0x%x..0x%x\n", + priv->spi->dev.bus_id, (unsigned)from, (unsigned)(from + len)); + + *retlen = 0; + + /* Sanity checks */ + if (!len) + return 0; + if (from + len > mtd->size) + return -EINVAL; + + /* Calculate flash page/byte address */ + addr = (((unsigned)from / priv->page_size) << priv->page_offset) + + ((unsigned)from % priv->page_size); + + command = priv->command; + + DEBUG(MTD_DEBUG_LEVEL3, "READ: (%x) %x %x %x\n", + command[0], command[1], command[2], command[3]); + + spi_message_init(&msg); + + x[0].tx_buf = command; + x[0].len = 8; + spi_message_add_tail(&x[0], &msg); + + x[1].rx_buf = buf; + x[1].len = len; + spi_message_add_tail(&x[1], &msg); + + down(&priv->lock); + + /* Continuous read, max clock = f(car) which may be less than + * the peak rate available. Some chips support commands with + * fewer "don't care" bytes. Both buffers stay unchanged. + */ + command[0] = OP_READ_CONTINUOUS; + command[1] = (u8)(addr >> 16); + command[2] = (u8)(addr >> 8); + command[3] = (u8)(addr >> 0); + /* plus 4 "don't care" bytes */ + + status = spi_sync(priv->spi, &msg); + up(&priv->lock); + + if (status >= 0) { + *retlen = msg.actual_length - 8; + status = 0; + } else + DEBUG(MTD_DEBUG_LEVEL1, "%s: read %x..%x --> %d\n", + priv->spi->dev.bus_id, + (unsigned)from, (unsigned)(from + len), + status); + return status; +} + +/* + * Write to the DataFlash device. + * to : Start offset in flash device + * len : Amount to write + * retlen : Amount of data actually written + * buf : Buffer containing the data + */ +static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t * retlen, const u_char * buf) +{ + struct dataflash *priv = (struct dataflash *)mtd->priv; + struct spi_device *spi = priv->spi; + struct spi_transfer x[2] = { { .tx_dma = 0, }, }; + struct spi_message msg; + unsigned int pageaddr, addr, offset, writelen; + size_t remaining = len; + u_char *writebuf = (u_char *) buf; + int status = -EINVAL; + u8 *command; + + DEBUG(MTD_DEBUG_LEVEL2, "%s: write 0x%x..0x%x\n", + spi->dev.bus_id, (unsigned)to, (unsigned)(to + len)); + + *retlen = 0; + + /* Sanity checks */ + if (!len) + return 0; + if ((to + len) > mtd->size) + return -EINVAL; + + spi_message_init(&msg); + + x[0].tx_buf = command = priv->command; + x[0].len = 4; + spi_message_add_tail(&x[0], &msg); + + pageaddr = ((unsigned)to / priv->page_size); + offset = ((unsigned)to % priv->page_size); + if (offset + len > priv->page_size) + writelen = priv->page_size - offset; + else + writelen = len; + + down(&priv->lock); + while (remaining > 0) { + DEBUG(MTD_DEBUG_LEVEL3, "write @ %i:%i len=%i\n", + pageaddr, offset, writelen); + + /* REVISIT: + * (a) each page in a sector must be rewritten at least + * once every 10K sibling erase/program operations. + * (b) for pages that are already erased, we could + * use WRITE+MWRITE not PROGRAM for ~30% speedup. + * (c) WRITE to buffer could be done while waiting for + * a previous MWRITE/MWERASE to complete ... + * (d) error handling here seems to be mostly missing. + * + * Two persistent bits per page, plus a per-sector counter, + * could support (a) and (b) ... we might consider using + * the second half of sector zero, which is just one block, + * to track that state. (On AT91, that sector should also + * support boot-from-DataFlash.) + */ + + addr = pageaddr << priv->page_offset; + + /* (1) Maybe transfer partial page to Buffer1 */ + if (writelen != priv->page_size) { + command[0] = OP_TRANSFER_BUF1; + command[1] = (addr & 0x00FF0000) >> 16; + command[2] = (addr & 0x0000FF00) >> 8; + command[3] = 0; + + DEBUG(MTD_DEBUG_LEVEL3, "TRANSFER: (%x) %x %x %x\n", + command[0], command[1], command[2], command[3]); + + status = spi_sync(spi, &msg); + if (status < 0) + DEBUG(MTD_DEBUG_LEVEL1, "%s: xfer %u -> %d \n", + spi->dev.bus_id, addr, status); + + (void) dataflash_waitready(priv->spi); + } + + /* (2) Program full page via Buffer1 */ + addr += offset; + command[0] = OP_PROGRAM_VIA_BUF1; + command[1] = (addr & 0x00FF0000) >> 16; + command[2] = (addr & 0x0000FF00) >> 8; + command[3] = (addr & 0x000000FF); + + DEBUG(MTD_DEBUG_LEVEL3, "PROGRAM: (%x) %x %x %x\n", + command[0], command[1], command[2], command[3]); + + x[1].tx_buf = writebuf; + x[1].len = writelen; + spi_message_add_tail(x + 1, &msg); + status = spi_sync(spi, &msg); + spi_transfer_del(x + 1); + if (status < 0) + DEBUG(MTD_DEBUG_LEVEL1, "%s: pgm %u/%u -> %d \n", + spi->dev.bus_id, addr, writelen, status); + + (void) dataflash_waitready(priv->spi); + + +#ifdef CONFIG_DATAFLASH_WRITE_VERIFY + + /* (3) Compare to Buffer1 */ + addr = pageaddr << priv->page_offset; + command[0] = OP_COMPARE_BUF1; + command[1] = (addr & 0x00FF0000) >> 16; + command[2] = (addr & 0x0000FF00) >> 8; + command[3] = 0; + + DEBUG(MTD_DEBUG_LEVEL3, "COMPARE: (%x) %x %x %x\n", + command[0], command[1], command[2], command[3]); + + status = spi_sync(spi, &msg); + if (status < 0) + DEBUG(MTD_DEBUG_LEVEL1, "%s: compare %u -> %d \n", + spi->dev.bus_id, addr, status); + + status = dataflash_waitready(priv->spi); + + /* Check result of the compare operation */ + if ((status & (1 << 6)) == 1) { + printk(KERN_ERR "%s: compare page %u, err %d\n", + spi->dev.bus_id, pageaddr, status); + remaining = 0; + status = -EIO; + break; + } else + status = 0; + +#endif /* CONFIG_DATAFLASH_WRITE_VERIFY */ + + remaining = remaining - writelen; + pageaddr++; + offset = 0; + writebuf += writelen; + *retlen += writelen; + + if (remaining > priv->page_size) + writelen = priv->page_size; + else + writelen = remaining; + } + up(&priv->lock); + + return status; +} + +/* ......................................................................... */ + +/* + * Register DataFlash device with MTD subsystem. + */ +static int __devinit +add_dataflash(struct spi_device *spi, char *name, + int nr_pages, int pagesize, int pageoffset) +{ + struct dataflash *priv; + struct mtd_info *device; + struct flash_platform_data *pdata = spi->dev.platform_data; + + priv = (struct dataflash *) kzalloc(sizeof *priv, GFP_KERNEL); + if (!priv) + return -ENOMEM; + + init_MUTEX(&priv->lock); + priv->spi = spi; + priv->page_size = pagesize; + priv->page_offset = pageoffset; + + /* name must be usable with cmdlinepart */ + sprintf(priv->name, "spi%d.%d-%s", + spi->master->bus_num, spi->chip_select, + name); + + device = &priv->mtd; + device->name = (pdata && pdata->name) ? pdata->name : priv->name; + device->size = nr_pages * pagesize; + device->erasesize = pagesize; + device->owner = THIS_MODULE; + device->type = MTD_DATAFLASH; + device->flags = MTD_CAP_NORFLASH; + device->erase = dataflash_erase; + device->read = dataflash_read; + device->write = dataflash_write; + device->priv = priv; + + dev_info(&spi->dev, "%s (%d KBytes)\n", name, device->size/1024); + dev_set_drvdata(&spi->dev, priv); + + if (mtd_has_partitions()) { + struct mtd_partition *parts; + int nr_parts = 0; + +#ifdef CONFIG_MTD_CMDLINE_PARTS + static const char *part_probes[] = { "cmdlinepart", NULL, }; + + nr_parts = parse_mtd_partitions(device, part_probes, &parts, 0); +#endif + + if (nr_parts <= 0 && pdata && pdata->parts) { + parts = pdata->parts; + nr_parts = pdata->nr_parts; + } + + if (nr_parts > 0) { + priv->partitioned = 1; + return add_mtd_partitions(device, parts, nr_parts); + } + } else if (pdata && pdata->nr_parts) + dev_warn(&spi->dev, "ignoring %d default partitions on %s\n", + pdata->nr_parts, device->name); + + return add_mtd_device(device) == 1 ? -ENODEV : 0; +} + +/* + * Detect and initialize DataFlash device: + * + * Device Density ID code #Pages PageSize Offset + * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9 + * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1025 264 9 + * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9 + * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9 + * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10 + * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10 + * AT45DB0642 64Mbit (8M) xx111xxx (0x3c) 8192 1056 11 + * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11 + */ +static int __devinit dataflash_probe(struct spi_device *spi) +{ + int status; + + status = dataflash_status(spi); + if (status <= 0 || status == 0xff) { + DEBUG(MTD_DEBUG_LEVEL1, "%s: status error %d\n", + spi->dev.bus_id, status); + if (status == 0xff) + status = -ENODEV; + return status; + } + + /* if there's a device there, assume it's dataflash. + * board setup should have set spi->max_speed_max to + * match f(car) for continuous reads, mode 0 or 3. + */ + switch (status & 0x3c) { + case 0x0c: /* 0 0 1 1 x x */ + status = add_dataflash(spi, "AT45DB011B", 512, 264, 9); + break; + case 0x14: /* 0 1 0 1 x x */ + status = add_dataflash(spi, "AT45DB021B", 1025, 264, 9); + break; + case 0x1c: /* 0 1 1 1 x x */ + status = add_dataflash(spi, "AT45DB041x", 2048, 264, 9); + break; + case 0x24: /* 1 0 0 1 x x */ + status = add_dataflash(spi, "AT45DB081B", 4096, 264, 9); + break; + case 0x2c: /* 1 0 1 1 x x */ + status = add_dataflash(spi, "AT45DB161x", 4096, 528, 10); + break; + case 0x34: /* 1 1 0 1 x x */ + status = add_dataflash(spi, "AT45DB321x", 8192, 528, 10); + break; + case 0x38: /* 1 1 1 x x x */ + case 0x3c: + status = add_dataflash(spi, "AT45DB642x", 8192, 1056, 11); + break; + /* obsolete AT45DB1282 not (yet?) supported */ + default: + DEBUG(MTD_DEBUG_LEVEL1, "%s: unsupported device (%x)\n", + spi->dev.bus_id, status & 0x3c); + status = -ENODEV; + } + + if (status < 0) + DEBUG(MTD_DEBUG_LEVEL1, "%s: add_dataflash --> %d\n", + spi->dev.bus_id, status); + + return status; +} + +static int __devexit dataflash_remove(struct spi_device *spi) +{ + struct dataflash *flash = dev_get_drvdata(&spi->dev); + int status; + + DEBUG(MTD_DEBUG_LEVEL1, "%s: remove\n", spi->dev.bus_id); + + if (mtd_has_partitions() && flash->partitioned) + status = del_mtd_partitions(&flash->mtd); + else + status = del_mtd_device(&flash->mtd); + if (status == 0) + kfree(flash); + return status; +} + +static struct spi_driver dataflash_driver = { + .driver = { + .name = "mtd_dataflash", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + + .probe = dataflash_probe, + .remove = __devexit_p(dataflash_remove), + + /* FIXME: investigate suspend and resume... */ +}; + +static int __init dataflash_init(void) +{ + return spi_register_driver(&dataflash_driver); +} +module_init(dataflash_init); + +static void __exit dataflash_exit(void) +{ + spi_unregister_driver(&dataflash_driver); +} +module_exit(dataflash_exit); + + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Andrew Victor, David Brownell"); +MODULE_DESCRIPTION("MTD DataFlash driver"); diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig new file mode 100644 index 000000000000..b77dbd63e596 --- /dev/null +++ b/drivers/spi/Kconfig @@ -0,0 +1,109 @@ +# +# SPI driver configuration +# +# NOTE: the reason this doesn't show SPI slave support is mostly that +# nobody's needed a slave side API yet. The master-role API is not +# fully appropriate there, so it'd need some thought to do well. +# +menu "SPI support" + +config SPI + bool "SPI support" + help + The "Serial Peripheral Interface" is a low level synchronous + protocol. Chips that support SPI can have data transfer rates + up to several tens of Mbit/sec. Chips are addressed with a + controller and a chipselect. Most SPI slaves don't support + dynamic device discovery; some are even write-only or read-only. + + SPI is widely used by microcontollers to talk with sensors, + eeprom and flash memory, codecs and various other controller + chips, analog to digital (and d-to-a) converters, and more. + MMC and SD cards can be accessed using SPI protocol; and for + DataFlash cards used in MMC sockets, SPI must always be used. + + SPI is one of a family of similar protocols using a four wire + interface (select, clock, data in, data out) including Microwire + (half duplex), SSP, SSI, and PSP. This driver framework should + work with most such devices and controllers. + +config SPI_DEBUG + boolean "Debug support for SPI drivers" + depends on SPI && DEBUG_KERNEL + help + Say "yes" to enable debug messaging (like dev_dbg and pr_debug), + sysfs, and debugfs support in SPI controller and protocol drivers. + +# +# MASTER side ... talking to discrete SPI slave chips including microcontrollers +# + +config SPI_MASTER +# boolean "SPI Master Support" + boolean + default SPI + help + If your system has an master-capable SPI controller (which + provides the clock and chipselect), you can enable that + controller and the protocol drivers for the SPI slave chips + that are connected. + +comment "SPI Master Controller Drivers" + depends on SPI_MASTER + +config SPI_BITBANG + tristate "Bitbanging SPI master" + depends on SPI_MASTER && EXPERIMENTAL + help + With a few GPIO pins, your system can bitbang the SPI protocol. + Select this to get SPI support through I/O pins (GPIO, parallel + port, etc). Or, some systems' SPI master controller drivers use + this code to manage the per-word or per-transfer accesses to the + hardware shift registers. + + This is library code, and is automatically selected by drivers that + need it. You only need to select this explicitly to support driver + modules that aren't part of this kernel tree. + +config SPI_BUTTERFLY + tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)" + depends on SPI_MASTER && PARPORT && EXPERIMENTAL + select SPI_BITBANG + help + This uses a custom parallel port cable to connect to an AVR + Butterfly <http://www.atmel.com/products/avr/butterfly>, an + inexpensive battery powered microcontroller evaluation board. + This same cable can be used to flash new firmware. + +config SPI_BUTTERFLY + tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)" + depends on SPI_MASTER && PARPORT && EXPERIMENTAL + select SPI_BITBANG + help + This uses a custom parallel port cable to connect to an AVR + Butterfly <http://www.atmel.com/products/avr/butterfly>, an + inexpensive battery powered microcontroller evaluation board. + This same cable can be used to flash new firmware. + +# +# Add new SPI master controllers in alphabetical order above this line +# + + +# +# There are lots of SPI device types, with sensors and memory +# being probably the most widely used ones. +# +comment "SPI Protocol Masters" + depends on SPI_MASTER + + +# +# Add new SPI protocol masters in alphabetical order above this line +# + + +# (slave support would go here) + +endmenu # "SPI support" + diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile new file mode 100644 index 000000000000..c2c87e845abf --- /dev/null +++ b/drivers/spi/Makefile @@ -0,0 +1,25 @@ +# +# Makefile for kernel SPI drivers. +# + +ifeq ($(CONFIG_SPI_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif + +# small core, mostly translating board-specific +# config declarations into driver model code +obj-$(CONFIG_SPI_MASTER) += spi.o + +# SPI master controller drivers (bus) +obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o +obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o +# ... add above this line ... + +# SPI protocol drivers (device/link on bus) +# ... add above this line ... + +# SPI slave controller drivers (upstream link) +# ... add above this line ... + +# SPI slave drivers (protocol for that link) +# ... add above this line ... diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c new file mode 100644 index 000000000000..791c4dc550ae --- /dev/null +++ b/drivers/spi/spi.c @@ -0,0 +1,642 @@ +/* + * spi.c - SPI init/core code + * + * Copyright (C) 2005 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/autoconf.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/cache.h> +#include <linux/spi/spi.h> + + +/* SPI bustype and spi_master class are registered after board init code + * provides the SPI device tables, ensuring that both are present by the + * time controller driver registration causes spi_devices to "enumerate". + */ +static void spidev_release(struct device *dev) +{ + const struct spi_device *spi = to_spi_device(dev); + + /* spi masters may cleanup for released devices */ + if (spi->master->cleanup) + spi->master->cleanup(spi); + + spi_master_put(spi->master); + kfree(dev); +} + +static ssize_t +modalias_show(struct device *dev, struct device_attribute *a, char *buf) +{ + const struct spi_device *spi = to_spi_device(dev); + + return snprintf(buf, BUS_ID_SIZE + 1, "%s\n", spi->modalias); +} + +static struct device_attribute spi_dev_attrs[] = { + __ATTR_RO(modalias), + __ATTR_NULL, +}; + +/* modalias support makes "modprobe $MODALIAS" new-style hotplug work, + * and the sysfs version makes coldplug work too. + */ + +static int spi_match_device(struct device *dev, struct device_driver *drv) +{ + const struct spi_device *spi = to_spi_device(dev); + + return strncmp(spi->modalias, drv->name, BUS_ID_SIZE) == 0; +} + +static int spi_uevent(struct device *dev, char **envp, int num_envp, + char *buffer, int buffer_size) +{ + const struct spi_device *spi = to_spi_device(dev); + + envp[0] = buffer; + snprintf(buffer, buffer_size, "MODALIAS=%s", spi->modalias); + envp[1] = NULL; + return 0; +} + +#ifdef CONFIG_PM + +/* + * NOTE: the suspend() method for an spi_master controller driver + * should verify that all its child devices are marked as suspended; + * suspend requests delivered through sysfs power/state files don't + * enforce such constraints. + */ +static int spi_suspend(struct device *dev, pm_message_t message) +{ + int value; + struct spi_driver *drv = to_spi_driver(dev->driver); + + if (!drv->suspend) + return 0; + + /* suspend will stop irqs and dma; no more i/o */ + value = drv->suspend(to_spi_device(dev), message); + if (value == 0) + dev->power.power_state = message; + return value; +} + +static int spi_resume(struct device *dev) +{ + int value; + struct spi_driver *drv = to_spi_driver(dev->driver); + + if (!drv->resume) + return 0; + + /* resume may restart the i/o queue */ + value = drv->resume(to_spi_device(dev)); + if (value == 0) + dev->power.power_state = PMSG_ON; + return value; +} + +#else +#define spi_suspend NULL +#define spi_resume NULL +#endif + +struct bus_type spi_bus_type = { + .name = "spi", + .dev_attrs = spi_dev_attrs, + .match = spi_match_device, + .uevent = spi_uevent, + .suspend = spi_suspend, + .resume = spi_resume, +}; +EXPORT_SYMBOL_GPL(spi_bus_type); + + +static int spi_drv_probe(struct device *dev) +{ + const struct spi_driver *sdrv = to_spi_driver(dev->driver); + + return sdrv->probe(to_spi_device(dev)); +} + +static int spi_drv_remove(struct device *dev) +{ + const struct spi_driver *sdrv = to_spi_driver(dev->driver); + + return sdrv->remove(to_spi_device(dev)); +} + +static void spi_drv_shutdown(struct device *dev) +{ + const struct spi_driver *sdrv = to_spi_driver(dev->driver); + + sdrv->shutdown(to_spi_device(dev)); +} + +int spi_register_driver(struct spi_driver *sdrv) +{ + sdrv->driver.bus = &spi_bus_type; + if (sdrv->probe) + sdrv->driver.probe = spi_drv_probe; + if (sdrv->remove) + sdrv->driver.remove = spi_drv_remove; + if (sdrv->shutdown) + sdrv->driver.shutdown = spi_drv_shutdown; + return driver_register(&sdrv->driver); +} +EXPORT_SYMBOL_GPL(spi_register_driver); + +/*-------------------------------------------------------------------------*/ + +/* SPI devices should normally not be created by SPI device drivers; that + * would make them board-specific. Similarly with SPI master drivers. + * Device registration normally goes into like arch/.../mach.../board-YYY.c + * with other readonly (flashable) information about mainboard devices. + */ + +struct boardinfo { + struct list_head list; + unsigned n_board_info; + struct spi_board_info board_info[0]; +}; + +static LIST_HEAD(board_list); +static DECLARE_MUTEX(board_lock); + + +/* On typical mainboards, this is purely internal; and it's not needed + * after board init creates the hard-wired devices. Some development + * platforms may not be able to use spi_register_board_info though, and + * this is exported so that for example a USB or parport based adapter + * driver could add devices (which it would learn about out-of-band). + */ +struct spi_device *__init_or_module +spi_new_device(struct spi_master *master, struct spi_board_info *chip) +{ + struct spi_device *proxy; + struct device *dev = master->cdev.dev; + int status; + + /* NOTE: caller did any chip->bus_num checks necessary */ + + if (!spi_master_get(master)) + return NULL; + + proxy = kzalloc(sizeof *proxy, GFP_KERNEL); + if (!proxy) { + dev_err(dev, "can't alloc dev for cs%d\n", + chip->chip_select); + goto fail; + } + proxy->master = master; + proxy->chip_select = chip->chip_select; + proxy->max_speed_hz = chip->max_speed_hz; + proxy->irq = chip->irq; + proxy->modalias = chip->modalias; + + snprintf(proxy->dev.bus_id, sizeof proxy->dev.bus_id, + "%s.%u", master->cdev.class_id, + chip->chip_select); + proxy->dev.parent = dev; + proxy->dev.bus = &spi_bus_type; + proxy->dev.platform_data = (void *) chip->platform_data; + proxy->controller_data = chip->controller_data; + proxy->controller_state = NULL; + proxy->dev.release = spidev_release; + + /* drivers may modify this default i/o setup */ + status = master->setup(proxy); + if (status < 0) { + dev_dbg(dev, "can't %s %s, status %d\n", + "setup", proxy->dev.bus_id, status); + goto fail; + } + + /* driver core catches callers that misbehave by defining + * devices that already exist. + */ + status = device_register(&proxy->dev); + if (status < 0) { + dev_dbg(dev, "can't %s %s, status %d\n", + "add", proxy->dev.bus_id, status); + goto fail; + } + dev_dbg(dev, "registered child %s\n", proxy->dev.bus_id); + return proxy; + +fail: + spi_master_put(master); + kfree(proxy); + return NULL; +} +EXPORT_SYMBOL_GPL(spi_new_device); + +/* + * Board-specific early init code calls this (probably during arch_initcall) + * with segments of the SPI device table. Any device nodes are created later, + * after the relevant parent SPI controller (bus_num) is defined. We keep + * this table of devices forever, so that reloading a controller driver will + * not make Linux forget about these hard-wired devices. + * + * Other code can also call this, e.g. a particular add-on board might provide + * SPI devices through its expansion connector, so code initializing that board + * would naturally declare its SPI devices. + * + * The board info passed can safely be __initdata ... but be careful of + * any embedded pointers (platform_data, etc), they're copied as-is. + */ +int __init +spi_register_board_info(struct spi_board_info const *info, unsigned n) +{ + struct boardinfo *bi; + + bi = kmalloc(sizeof(*bi) + n * sizeof *info, GFP_KERNEL); + if (!bi) + return -ENOMEM; + bi->n_board_info = n; + memcpy(bi->board_info, info, n * sizeof *info); + + down(&board_lock); + list_add_tail(&bi->list, &board_list); + up(&board_lock); + return 0; +} +EXPORT_SYMBOL_GPL(spi_register_board_info); + +/* FIXME someone should add support for a __setup("spi", ...) that + * creates board info from kernel command lines + */ + +static void __init_or_module +scan_boardinfo(struct spi_master *master) +{ + struct boardinfo *bi; + struct device *dev = master->cdev.dev; + + down(&board_lock); + list_for_each_entry(bi, &board_list, list) { + struct spi_board_info *chip = bi->board_info; + unsigned n; + + for (n = bi->n_board_info; n > 0; n--, chip++) { + if (chip->bus_num != master->bus_num) + continue; + /* some controllers only have one chip, so they + * might not use chipselects. otherwise, the + * chipselects are numbered 0..max. + */ + if (chip->chip_select >= master->num_chipselect + && master->num_chipselect) { + dev_dbg(dev, "cs%d > max %d\n", + chip->chip_select, + master->num_chipselect); + continue; + } + (void) spi_new_device(master, chip); + } + } + up(&board_lock); +} + +/*-------------------------------------------------------------------------*/ + +static void spi_master_release(struct class_device *cdev) +{ + struct spi_master *master; + + master = container_of(cdev, struct spi_master, cdev); + kfree(master); +} + +static struct class spi_master_class = { + .name = "spi_master", + .owner = THIS_MODULE, + .release = spi_master_release, +}; + + +/** + * spi_alloc_master - allocate SPI master controller + * @dev: the controller, possibly using the platform_bus + * @size: how much driver-private data to preallocate; the pointer to this + * memory is in the class_data field of the returned class_device, + * accessible with spi_master_get_devdata(). + * + * This call is used only by SPI master controller drivers, which are the + * only ones directly touching chip registers. It's how they allocate + * an spi_master structure, prior to calling spi_add_master(). + * + * This must be called from context that can sleep. It returns the SPI + * master structure on success, else NULL. + * + * The caller is responsible for assigning the bus number and initializing + * the master's methods before calling spi_add_master(); and (after errors + * adding the device) calling spi_master_put() to prevent a memory leak. + */ +struct spi_master * __init_or_module +spi_alloc_master(struct device *dev, unsigned size) +{ + struct spi_master *master; + + if (!dev) + return NULL; + + master = kzalloc(size + sizeof *master, SLAB_KERNEL); + if (!master) + return NULL; + + class_device_initialize(&master->cdev); + master->cdev.class = &spi_master_class; + master->cdev.dev = get_device(dev); + spi_master_set_devdata(master, &master[1]); + + return master; +} +EXPORT_SYMBOL_GPL(spi_alloc_master); + +/** + * spi_register_master - register SPI master controller + * @master: initialized master, originally from spi_alloc_master() + * + * SPI master controllers connect to their drivers using some non-SPI bus, + * such as the platform bus. The final stage of probe() in that code + * includes calling spi_register_master() to hook up to this SPI bus glue. + * + * SPI controllers use board specific (often SOC specific) bus numbers, + * and board-specific addressing for SPI devices combines those numbers + * with chip select numbers. Since SPI does not directly support dynamic + * device identification, boards need configuration tables telling which + * chip is at which address. + * + * This must be called from context that can sleep. It returns zero on + * success, else a negative error code (dropping the master's refcount). + * After a successful return, the caller is responsible for calling + * spi_unregister_master(). + */ +int __init_or_module +spi_register_master(struct spi_master *master) +{ + static atomic_t dyn_bus_id = ATOMIC_INIT(0); + struct device *dev = master->cdev.dev; + int status = -ENODEV; + int dynamic = 0; + + if (!dev) + return -ENODEV; + + /* convention: dynamically assigned bus IDs count down from the max */ + if (master->bus_num == 0) { + master->bus_num = atomic_dec_return(&dyn_bus_id); + dynamic = 1; + } + + /* register the device, then userspace will see it. + * registration fails if the bus ID is in use. + */ + snprintf(master->cdev.class_id, sizeof master->cdev.class_id, + "spi%u", master->bus_num); + status = class_device_add(&master->cdev); + if (status < 0) + goto done; + dev_dbg(dev, "registered master %s%s\n", master->cdev.class_id, + dynamic ? " (dynamic)" : ""); + + /* populate children from any spi device tables */ + scan_boardinfo(master); + status = 0; +done: + return status; +} +EXPORT_SYMBOL_GPL(spi_register_master); + + +static int __unregister(struct device *dev, void *unused) +{ + /* note: before about 2.6.14-rc1 this would corrupt memory: */ + spi_unregister_device(to_spi_device(dev)); + return 0; +} + +/** + * spi_unregister_master - unregister SPI master controller + * @master: the master being unregistered + * + * This call is used only by SPI master controller drivers, which are the + * only ones directly touching chip registers. + * + * This must be called from context that can sleep. + */ +void spi_unregister_master(struct spi_master *master) +{ + (void) device_for_each_child(master->cdev.dev, NULL, __unregister); + class_device_unregister(&master->cdev); + master->cdev.dev = NULL; +} +EXPORT_SYMBOL_GPL(spi_unregister_master); + +/** + * spi_busnum_to_master - look up master associated with bus_num + * @bus_num: the master's bus number + * + * This call may be used with devices that are registered after + * arch init time. It returns a refcounted pointer to the relevant + * spi_master (which the caller must release), or NULL if there is + * no such master registered. + */ +struct spi_master *spi_busnum_to_master(u16 bus_num) +{ + if (bus_num) { + char name[8]; + struct kobject *bus; + + snprintf(name, sizeof name, "spi%u", bus_num); + bus = kset_find_obj(&spi_master_class.subsys.kset, name); + if (bus) + return container_of(bus, struct spi_master, cdev.kobj); + } + return NULL; +} +EXPORT_SYMBOL_GPL(spi_busnum_to_master); + + +/*-------------------------------------------------------------------------*/ + +static void spi_complete(void *arg) +{ + complete(arg); +} + +/** + * spi_sync - blocking/synchronous SPI data transfers + * @spi: device with which data will be exchanged + * @message: describes the data transfers + * + * This call may only be used from a context that may sleep. The sleep + * is non-interruptible, and has no timeout. Low-overhead controller + * drivers may DMA directly into and out of the message buffers. + * + * Note that the SPI device's chip select is active during the message, + * and then is normally disabled between messages. Drivers for some + * frequently-used devices may want to minimize costs of selecting a chip, + * by leaving it selected in anticipation that the next message will go + * to the same chip. (That may increase power usage.) + * + * Also, the caller is guaranteeing that the memory associated with the + * message will not be freed before this call returns. + * + * The return value is a negative error code if the message could not be + * submitted, else zero. When the value is zero, then message->status is + * also defined: it's the completion code for the transfer, either zero + * or a negative error code from the controller driver. + */ +int spi_sync(struct spi_device *spi, struct spi_message *message) +{ + DECLARE_COMPLETION(done); + int status; + + message->complete = spi_complete; + message->context = &done; + status = spi_async(spi, message); + if (status == 0) + wait_for_completion(&done); + message->context = NULL; + return status; +} +EXPORT_SYMBOL_GPL(spi_sync); + +#define SPI_BUFSIZ (SMP_CACHE_BYTES) + +static u8 *buf; + +/** + * spi_write_then_read - SPI synchronous write followed by read + * @spi: device with which data will be exchanged + * @txbuf: data to be written (need not be dma-safe) + * @n_tx: size of txbuf, in bytes + * @rxbuf: buffer into which data will be read + * @n_rx: size of rxbuf, in bytes (need not be dma-safe) + * + * This performs a half duplex MicroWire style transaction with the + * device, sending txbuf and then reading rxbuf. The return value + * is zero for success, else a negative errno status code. + * This call may only be used from a context that may sleep. + * + * Parameters to this routine are always copied using a small buffer; + * performance-sensitive or bulk transfer code should instead use + * spi_{async,sync}() calls with dma-safe buffers. + */ +int spi_write_then_read(struct spi_device *spi, + const u8 *txbuf, unsigned n_tx, + u8 *rxbuf, unsigned n_rx) +{ + static DECLARE_MUTEX(lock); + + int status; + struct spi_message message; + struct spi_transfer x[2]; + u8 *local_buf; + + /* Use preallocated DMA-safe buffer. We can't avoid copying here, + * (as a pure convenience thing), but we can keep heap costs + * out of the hot path ... + */ + if ((n_tx + n_rx) > SPI_BUFSIZ) + return -EINVAL; + + spi_message_init(&message); + memset(x, 0, sizeof x); + if (n_tx) { + x[0].len = n_tx; + spi_message_add_tail(&x[0], &message); + } + if (n_rx) { + x[1].len = n_rx; + spi_message_add_tail(&x[1], &message); + } + + /* ... unless someone else is using the pre-allocated buffer */ + if (down_trylock(&lock)) { + local_buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL); + if (!local_buf) + return -ENOMEM; + } else + local_buf = buf; + + memcpy(local_buf, txbuf, n_tx); + x[0].tx_buf = local_buf; + x[1].rx_buf = local_buf + n_tx; + + /* do the i/o */ + status = spi_sync(spi, &message); + if (status == 0) { + memcpy(rxbuf, x[1].rx_buf, n_rx); + status = message.status; + } + + if (x[0].tx_buf == buf) + up(&lock); + else + kfree(local_buf); + + return status; +} +EXPORT_SYMBOL_GPL(spi_write_then_read); + +/*-------------------------------------------------------------------------*/ + +static int __init spi_init(void) +{ + int status; + + buf = kmalloc(SPI_BUFSIZ, SLAB_KERNEL); + if (!buf) { + status = -ENOMEM; + goto err0; + } + + status = bus_register(&spi_bus_type); + if (status < 0) + goto err1; + + status = class_register(&spi_master_class); + if (status < 0) + goto err2; + return 0; + +err2: + bus_unregister(&spi_bus_type); +err1: + kfree(buf); + buf = NULL; +err0: + return status; +} + +/* board_info is normally registered in arch_initcall(), + * but even essential drivers wait till later + * + * REVISIT only boardinfo really needs static linking. the rest (device and + * driver registration) _could_ be dynamically linked (modular) ... costs + * include needing to have boardinfo data structures be much more public. + */ +subsys_initcall(spi_init); + diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c new file mode 100644 index 000000000000..f037e5593269 --- /dev/null +++ b/drivers/spi/spi_bitbang.c @@ -0,0 +1,472 @@ +/* + * spi_bitbang.c - polling/bitbanging SPI master controller driver utilities + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/platform_device.h> + +#include <linux/spi/spi.h> +#include <linux/spi/spi_bitbang.h> + + +/*----------------------------------------------------------------------*/ + +/* + * FIRST PART (OPTIONAL): word-at-a-time spi_transfer support. + * Use this for GPIO or shift-register level hardware APIs. + * + * spi_bitbang_cs is in spi_device->controller_state, which is unavailable + * to glue code. These bitbang setup() and cleanup() routines are always + * used, though maybe they're called from controller-aware code. + * + * chipselect() and friends may use use spi_device->controller_data and + * controller registers as appropriate. + * + * + * NOTE: SPI controller pins can often be used as GPIO pins instead, + * which means you could use a bitbang driver either to get hardware + * working quickly, or testing for differences that aren't speed related. + */ + +struct spi_bitbang_cs { + unsigned nsecs; /* (clock cycle time)/2 */ + u32 (*txrx_word)(struct spi_device *spi, unsigned nsecs, + u32 word, u8 bits); + unsigned (*txrx_bufs)(struct spi_device *, + u32 (*txrx_word)( + struct spi_device *spi, + unsigned nsecs, + u32 word, u8 bits), + unsigned, struct spi_transfer *); +}; + +static unsigned bitbang_txrx_8( + struct spi_device *spi, + u32 (*txrx_word)(struct spi_device *spi, + unsigned nsecs, + u32 word, u8 bits), + unsigned ns, + struct spi_transfer *t +) { + unsigned bits = spi->bits_per_word; + unsigned count = t->len; + const u8 *tx = t->tx_buf; + u8 *rx = t->rx_buf; + + while (likely(count > 0)) { + u8 word = 0; + + if (tx) + word = *tx++; + word = txrx_word(spi, ns, word, bits); + if (rx) + *rx++ = word; + count -= 1; + } + return t->len - count; +} + +static unsigned bitbang_txrx_16( + struct spi_device *spi, + u32 (*txrx_word)(struct spi_device *spi, + unsigned nsecs, + u32 word, u8 bits), + unsigned ns, + struct spi_transfer *t +) { + unsigned bits = spi->bits_per_word; + unsigned count = t->len; + const u16 *tx = t->tx_buf; + u16 *rx = t->rx_buf; + + while (likely(count > 1)) { + u16 word = 0; + + if (tx) + word = *tx++; + word = txrx_word(spi, ns, word, bits); + if (rx) + *rx++ = word; + count -= 2; + } + return t->len - count; +} + +static unsigned bitbang_txrx_32( + struct spi_device *spi, + u32 (*txrx_word)(struct spi_device *spi, + unsigned nsecs, + u32 word, u8 bits), + unsigned ns, + struct spi_transfer *t +) { + unsigned bits = spi->bits_per_word; + unsigned count = t->len; + const u32 *tx = t->tx_buf; + u32 *rx = t->rx_buf; + + while (likely(count > 3)) { + u32 word = 0; + + if (tx) + word = *tx++; + word = txrx_word(spi, ns, word, bits); + if (rx) + *rx++ = word; + count -= 4; + } + return t->len - count; +} + +/** + * spi_bitbang_setup - default setup for per-word I/O loops + */ +int spi_bitbang_setup(struct spi_device *spi) +{ + struct spi_bitbang_cs *cs = spi->controller_state; + struct spi_bitbang *bitbang; + + if (!spi->max_speed_hz) + return -EINVAL; + + if (!cs) { + cs = kzalloc(sizeof *cs, SLAB_KERNEL); + if (!cs) + return -ENOMEM; + spi->controller_state = cs; + } + bitbang = spi_master_get_devdata(spi->master); + + if (!spi->bits_per_word) + spi->bits_per_word = 8; + + /* spi_transfer level calls that work per-word */ + if (spi->bits_per_word <= 8) + cs->txrx_bufs = bitbang_txrx_8; + else if (spi->bits_per_word <= 16) + cs->txrx_bufs = bitbang_txrx_16; + else if (spi->bits_per_word <= 32) + cs->txrx_bufs = bitbang_txrx_32; + else + return -EINVAL; + + /* per-word shift register access, in hardware or bitbanging */ + cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)]; + if (!cs->txrx_word) + return -EINVAL; + + /* nsecs = (clock period)/2 */ + cs->nsecs = (1000000000/2) / (spi->max_speed_hz); + if (cs->nsecs > MAX_UDELAY_MS * 1000) + return -EINVAL; + + dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n", + __FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA), + spi->bits_per_word, 2 * cs->nsecs); + + /* NOTE we _need_ to call chipselect() early, ideally with adapter + * setup, unless the hardware defaults cooperate to avoid confusion + * between normal (active low) and inverted chipselects. + */ + + /* deselect chip (low or high) */ + spin_lock(&bitbang->lock); + if (!bitbang->busy) { + bitbang->chipselect(spi, BITBANG_CS_INACTIVE); + ndelay(cs->nsecs); + } + spin_unlock(&bitbang->lock); + + return 0; +} +EXPORT_SYMBOL_GPL(spi_bitbang_setup); + +/** + * spi_bitbang_cleanup - default cleanup for per-word I/O loops + */ +void spi_bitbang_cleanup(const struct spi_device *spi) +{ + kfree(spi->controller_state); +} +EXPORT_SYMBOL_GPL(spi_bitbang_cleanup); + +static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t) +{ + struct spi_bitbang_cs *cs = spi->controller_state; + unsigned nsecs = cs->nsecs; + + return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t); +} + +/*----------------------------------------------------------------------*/ + +/* + * SECOND PART ... simple transfer queue runner. + * + * This costs a task context per controller, running the queue by + * performing each transfer in sequence. Smarter hardware can queue + * several DMA transfers at once, and process several controller queues + * in parallel; this driver doesn't match such hardware very well. + * + * Drivers can provide word-at-a-time i/o primitives, or provide + * transfer-at-a-time ones to leverage dma or fifo hardware. + */ +static void bitbang_work(void *_bitbang) +{ + struct spi_bitbang *bitbang = _bitbang; + unsigned long flags; + + spin_lock_irqsave(&bitbang->lock, flags); + bitbang->busy = 1; + while (!list_empty(&bitbang->queue)) { + struct spi_message *m; + struct spi_device *spi; + unsigned nsecs; + struct spi_transfer *t = NULL; + unsigned tmp; + unsigned cs_change; + int status; + + m = container_of(bitbang->queue.next, struct spi_message, + queue); + list_del_init(&m->queue); + spin_unlock_irqrestore(&bitbang->lock, flags); + + /* FIXME this is made-up ... the correct value is known to + * word-at-a-time bitbang code, and presumably chipselect() + * should enforce these requirements too? + */ + nsecs = 100; + + spi = m->spi; + tmp = 0; + cs_change = 1; + status = 0; + + list_for_each_entry (t, &m->transfers, transfer_list) { + if (bitbang->shutdown) { + status = -ESHUTDOWN; + break; + } + + /* set up default clock polarity, and activate chip; + * this implicitly updates clock and spi modes as + * previously recorded for this device via setup(). + * (and also deselects any other chip that might be + * selected ...) + */ + if (cs_change) { + bitbang->chipselect(spi, BITBANG_CS_ACTIVE); + ndelay(nsecs); + } + cs_change = t->cs_change; + if (!t->tx_buf && !t->rx_buf && t->len) { + status = -EINVAL; + break; + } + + /* transfer data. the lower level code handles any + * new dma mappings it needs. our caller always gave + * us dma-safe buffers. + */ + if (t->len) { + /* REVISIT dma API still needs a designated + * DMA_ADDR_INVALID; ~0 might be better. + */ + if (!m->is_dma_mapped) + t->rx_dma = t->tx_dma = 0; + status = bitbang->txrx_bufs(spi, t); + } + if (status != t->len) { + if (status > 0) + status = -EMSGSIZE; + break; + } + m->actual_length += status; + status = 0; + + /* protocol tweaks before next transfer */ + if (t->delay_usecs) + udelay(t->delay_usecs); + + if (!cs_change) + continue; + if (t->transfer_list.next == &m->transfers) + break; + + /* sometimes a short mid-message deselect of the chip + * may be needed to terminate a mode or command + */ + ndelay(nsecs); + bitbang->chipselect(spi, BITBANG_CS_INACTIVE); + ndelay(nsecs); + } + + m->status = status; + m->complete(m->context); + + /* normally deactivate chipselect ... unless no error and + * cs_change has hinted that the next message will probably + * be for this chip too. + */ + if (!(status == 0 && cs_change)) { + ndelay(nsecs); + bitbang->chipselect(spi, BITBANG_CS_INACTIVE); + ndelay(nsecs); + } + + spin_lock_irqsave(&bitbang->lock, flags); + } + bitbang->busy = 0; + spin_unlock_irqrestore(&bitbang->lock, flags); +} + +/** + * spi_bitbang_transfer - default submit to transfer queue + */ +int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m) +{ + struct spi_bitbang *bitbang; + unsigned long flags; + + m->actual_length = 0; + m->status = -EINPROGRESS; + + bitbang = spi_master_get_devdata(spi->master); + if (bitbang->shutdown) + return -ESHUTDOWN; + + spin_lock_irqsave(&bitbang->lock, flags); + list_add_tail(&m->queue, &bitbang->queue); + queue_work(bitbang->workqueue, &bitbang->work); + spin_unlock_irqrestore(&bitbang->lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(spi_bitbang_transfer); + +/*----------------------------------------------------------------------*/ + +/** + * spi_bitbang_start - start up a polled/bitbanging SPI master driver + * @bitbang: driver handle + * + * Caller should have zero-initialized all parts of the structure, and then + * provided callbacks for chip selection and I/O loops. If the master has + * a transfer method, its final step should call spi_bitbang_transfer; or, + * that's the default if the transfer routine is not initialized. It should + * also set up the bus number and number of chipselects. + * + * For i/o loops, provide callbacks either per-word (for bitbanging, or for + * hardware that basically exposes a shift register) or per-spi_transfer + * (which takes better advantage of hardware like fifos or DMA engines). + * + * Drivers using per-word I/O loops should use (or call) spi_bitbang_setup and + * spi_bitbang_cleanup to handle those spi master methods. Those methods are + * the defaults if the bitbang->txrx_bufs routine isn't initialized. + * + * This routine registers the spi_master, which will process requests in a + * dedicated task, keeping IRQs unblocked most of the time. To stop + * processing those requests, call spi_bitbang_stop(). + */ +int spi_bitbang_start(struct spi_bitbang *bitbang) +{ + int status; + + if (!bitbang->master || !bitbang->chipselect) + return -EINVAL; + + INIT_WORK(&bitbang->work, bitbang_work, bitbang); + spin_lock_init(&bitbang->lock); + INIT_LIST_HEAD(&bitbang->queue); + + if (!bitbang->master->transfer) + bitbang->master->transfer = spi_bitbang_transfer; + if (!bitbang->txrx_bufs) { + bitbang->use_dma = 0; + bitbang->txrx_bufs = spi_bitbang_bufs; + if (!bitbang->master->setup) { + bitbang->master->setup = spi_bitbang_setup; + bitbang->master->cleanup = spi_bitbang_cleanup; + } + } else if (!bitbang->master->setup) + return -EINVAL; + + /* this task is the only thing to touch the SPI bits */ + bitbang->busy = 0; + bitbang->workqueue = create_singlethread_workqueue( + bitbang->master->cdev.dev->bus_id); + if (bitbang->workqueue == NULL) { + status = -EBUSY; + goto err1; + } + + /* driver may get busy before register() returns, especially + * if someone registered boardinfo for devices + */ + status = spi_register_master(bitbang->master); + if (status < 0) + goto err2; + + return status; + +err2: + destroy_workqueue(bitbang->workqueue); +err1: + return status; +} +EXPORT_SYMBOL_GPL(spi_bitbang_start); + +/** + * spi_bitbang_stop - stops the task providing spi communication + */ +int spi_bitbang_stop(struct spi_bitbang *bitbang) +{ + unsigned limit = 500; + + spin_lock_irq(&bitbang->lock); + bitbang->shutdown = 0; + while (!list_empty(&bitbang->queue) && limit--) { + spin_unlock_irq(&bitbang->lock); + + dev_dbg(bitbang->master->cdev.dev, "wait for queue\n"); + msleep(10); + + spin_lock_irq(&bitbang->lock); + } + spin_unlock_irq(&bitbang->lock); + if (!list_empty(&bitbang->queue)) { + dev_err(bitbang->master->cdev.dev, "queue didn't empty\n"); + return -EBUSY; + } + + destroy_workqueue(bitbang->workqueue); + + spi_unregister_master(bitbang->master); + + return 0; +} +EXPORT_SYMBOL_GPL(spi_bitbang_stop); + +MODULE_LICENSE("GPL"); + diff --git a/drivers/spi/spi_butterfly.c b/drivers/spi/spi_butterfly.c new file mode 100644 index 000000000000..79a3c59615ab --- /dev/null +++ b/drivers/spi/spi_butterfly.c @@ -0,0 +1,423 @@ +/* + * spi_butterfly.c - parport-to-butterfly adapter + * + * Copyright (C) 2005 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/parport.h> + +#include <linux/spi/spi.h> +#include <linux/spi/spi_bitbang.h> +#include <linux/spi/flash.h> + +#include <linux/mtd/partitions.h> + + +/* + * This uses SPI to talk with an "AVR Butterfly", which is a $US20 card + * with a battery powered AVR microcontroller and lots of goodies. You + * can use GCC to develop firmware for this. + * + * See Documentation/spi/butterfly for information about how to build + * and use this custom parallel port cable. + */ + +#undef HAVE_USI /* nyet */ + + +/* DATA output bits (pins 2..9 == D0..D7) */ +#define butterfly_nreset (1 << 1) /* pin 3 */ + +#define spi_sck_bit (1 << 0) /* pin 2 */ +#define spi_mosi_bit (1 << 7) /* pin 9 */ + +#define usi_sck_bit (1 << 3) /* pin 5 */ +#define usi_mosi_bit (1 << 4) /* pin 6 */ + +#define vcc_bits ((1 << 6) | (1 << 5)) /* pins 7, 8 */ + +/* STATUS input bits */ +#define spi_miso_bit PARPORT_STATUS_BUSY /* pin 11 */ + +#define usi_miso_bit PARPORT_STATUS_PAPEROUT /* pin 12 */ + +/* CONTROL output bits */ +#define spi_cs_bit PARPORT_CONTROL_SELECT /* pin 17 */ +/* USI uses no chipselect */ + + + +static inline struct butterfly *spidev_to_pp(struct spi_device *spi) +{ + return spi->controller_data; +} + +static inline int is_usidev(struct spi_device *spi) +{ +#ifdef HAVE_USI + return spi->chip_select != 1; +#else + return 0; +#endif +} + + +struct butterfly { + /* REVISIT ... for now, this must be first */ + struct spi_bitbang bitbang; + + struct parport *port; + struct pardevice *pd; + + u8 lastbyte; + + struct spi_device *dataflash; + struct spi_device *butterfly; + struct spi_board_info info[2]; + +}; + +/*----------------------------------------------------------------------*/ + +/* + * these routines may be slower than necessary because they're hiding + * the fact that there are two different SPI busses on this cable: one + * to the DataFlash chip (or AVR SPI controller), the other to the + * AVR USI controller. + */ + +static inline void +setsck(struct spi_device *spi, int is_on) +{ + struct butterfly *pp = spidev_to_pp(spi); + u8 bit, byte = pp->lastbyte; + + if (is_usidev(spi)) + bit = usi_sck_bit; + else + bit = spi_sck_bit; + + if (is_on) + byte |= bit; + else + byte &= ~bit; + parport_write_data(pp->port, byte); + pp->lastbyte = byte; +} + +static inline void +setmosi(struct spi_device *spi, int is_on) +{ + struct butterfly *pp = spidev_to_pp(spi); + u8 bit, byte = pp->lastbyte; + + if (is_usidev(spi)) + bit = usi_mosi_bit; + else + bit = spi_mosi_bit; + + if (is_on) + byte |= bit; + else + byte &= ~bit; + parport_write_data(pp->port, byte); + pp->lastbyte = byte; +} + +static inline int getmiso(struct spi_device *spi) +{ + struct butterfly *pp = spidev_to_pp(spi); + int value; + u8 bit; + + if (is_usidev(spi)) + bit = usi_miso_bit; + else + bit = spi_miso_bit; + + /* only STATUS_BUSY is NOT negated */ + value = !(parport_read_status(pp->port) & bit); + return (bit == PARPORT_STATUS_BUSY) ? value : !value; +} + +static void butterfly_chipselect(struct spi_device *spi, int value) +{ + struct butterfly *pp = spidev_to_pp(spi); + + /* set default clock polarity */ + if (value) + setsck(spi, spi->mode & SPI_CPOL); + + /* no chipselect on this USI link config */ + if (is_usidev(spi)) + return; + + /* here, value == "activate or not" */ + + /* most PARPORT_CONTROL_* bits are negated */ + if (spi_cs_bit == PARPORT_CONTROL_INIT) + value = !value; + + /* here, value == "bit value to write in control register" */ + + parport_frob_control(pp->port, spi_cs_bit, value ? spi_cs_bit : 0); +} + + +/* we only needed to implement one mode here, and choose SPI_MODE_0 */ + +#define spidelay(X) do{}while(0) +//#define spidelay ndelay + +#define EXPAND_BITBANG_TXRX +#include <linux/spi/spi_bitbang.h> + +static u32 +butterfly_txrx_word_mode0(struct spi_device *spi, + unsigned nsecs, + u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits); +} + +/*----------------------------------------------------------------------*/ + +/* override default partitioning with cmdlinepart */ +static struct mtd_partition partitions[] = { { + /* JFFS2 wants partitions of 4*N blocks for this device ... */ + + /* sector 0 = 8 pages * 264 bytes/page (1 block) + * sector 1 = 248 pages * 264 bytes/page + */ + .name = "bookkeeping", // 66 KB + .offset = 0, + .size = (8 + 248) * 264, +// .mask_flags = MTD_WRITEABLE, +}, { + /* sector 2 = 256 pages * 264 bytes/page + * sectors 3-5 = 512 pages * 264 bytes/page + */ + .name = "filesystem", // 462 KB + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, +} }; + +static struct flash_platform_data flash = { + .name = "butterflash", + .parts = partitions, + .nr_parts = ARRAY_SIZE(partitions), +}; + + +/* REVISIT remove this ugly global and its "only one" limitation */ +static struct butterfly *butterfly; + +static void butterfly_attach(struct parport *p) +{ + struct pardevice *pd; + int status; + struct butterfly *pp; + struct spi_master *master; + struct platform_device *pdev; + + if (butterfly) + return; + + /* REVISIT: this just _assumes_ a butterfly is there ... no probe, + * and no way to be selective about what it binds to. + */ + + /* FIXME where should master->cdev.dev come from? + * e.g. /sys/bus/pnp0/00:0b, some PCI thing, etc + * setting up a platform device like this is an ugly kluge... + */ + pdev = platform_device_register_simple("butterfly", -1, NULL, 0); + + master = spi_alloc_master(&pdev->dev, sizeof *pp); + if (!master) { + status = -ENOMEM; + goto done; + } + pp = spi_master_get_devdata(master); + + /* + * SPI and bitbang hookup + * + * use default setup(), cleanup(), and transfer() methods; and + * only bother implementing mode 0. Start it later. + */ + master->bus_num = 42; + master->num_chipselect = 2; + + pp->bitbang.master = spi_master_get(master); + pp->bitbang.chipselect = butterfly_chipselect; + pp->bitbang.txrx_word[SPI_MODE_0] = butterfly_txrx_word_mode0; + + /* + * parport hookup + */ + pp->port = p; + pd = parport_register_device(p, "spi_butterfly", + NULL, NULL, NULL, + 0 /* FLAGS */, pp); + if (!pd) { + status = -ENOMEM; + goto clean0; + } + pp->pd = pd; + + status = parport_claim(pd); + if (status < 0) + goto clean1; + + /* + * Butterfly reset, powerup, run firmware + */ + pr_debug("%s: powerup/reset Butterfly\n", p->name); + + /* nCS for dataflash (this bit is inverted on output) */ + parport_frob_control(pp->port, spi_cs_bit, 0); + + /* stabilize power with chip in reset (nRESET), and + * both spi_sck_bit and usi_sck_bit clear (CPOL=0) + */ + pp->lastbyte |= vcc_bits; + parport_write_data(pp->port, pp->lastbyte); + msleep(5); + + /* take it out of reset; assume long reset delay */ + pp->lastbyte |= butterfly_nreset; + parport_write_data(pp->port, pp->lastbyte); + msleep(100); + + + /* + * Start SPI ... for now, hide that we're two physical busses. + */ + status = spi_bitbang_start(&pp->bitbang); + if (status < 0) + goto clean2; + + /* Bus 1 lets us talk to at45db041b (firmware disables AVR) + * or AVR (firmware resets at45, acts as spi slave) + */ + pp->info[0].max_speed_hz = 15 * 1000 * 1000; + strcpy(pp->info[0].modalias, "mtd_dataflash"); + pp->info[0].platform_data = &flash; + pp->info[0].chip_select = 1; + pp->info[0].controller_data = pp; + pp->dataflash = spi_new_device(pp->bitbang.master, &pp->info[0]); + if (pp->dataflash) + pr_debug("%s: dataflash at %s\n", p->name, + pp->dataflash->dev.bus_id); + +#ifdef HAVE_USI + /* even more custom AVR firmware */ + pp->info[1].max_speed_hz = 10 /* ?? */ * 1000 * 1000; + strcpy(pp->info[1].modalias, "butterfly"); + // pp->info[1].platform_data = ... TBD ... ; + pp->info[1].chip_select = 2, + pp->info[1].controller_data = pp; + pp->butterfly = spi_new_device(pp->bitbang.master, &pp->info[1]); + if (pp->butterfly) + pr_debug("%s: butterfly at %s\n", p->name, + pp->butterfly->dev.bus_id); + + /* FIXME setup ACK for the IRQ line ... */ +#endif + + // dev_info(_what?_, ...) + pr_info("%s: AVR Butterfly\n", p->name); + butterfly = pp; + return; + +clean2: + /* turn off VCC */ + parport_write_data(pp->port, 0); + + parport_release(pp->pd); +clean1: + parport_unregister_device(pd); +clean0: + (void) spi_master_put(pp->bitbang.master); +done: + platform_device_unregister(pdev); + pr_debug("%s: butterfly probe, fail %d\n", p->name, status); +} + +static void butterfly_detach(struct parport *p) +{ + struct butterfly *pp; + struct platform_device *pdev; + int status; + + /* FIXME this global is ugly ... but, how to quickly get from + * the parport to the "struct butterfly" associated with it? + * "old school" driver-internal device lists? + */ + if (!butterfly || butterfly->port != p) + return; + pp = butterfly; + butterfly = NULL; + +#ifdef HAVE_USI + spi_unregister_device(pp->butterfly); + pp->butterfly = NULL; +#endif + spi_unregister_device(pp->dataflash); + pp->dataflash = NULL; + + status = spi_bitbang_stop(&pp->bitbang); + + /* turn off VCC */ + parport_write_data(pp->port, 0); + msleep(10); + + parport_release(pp->pd); + parport_unregister_device(pp->pd); + + pdev = to_platform_device(pp->bitbang.master->cdev.dev); + + (void) spi_master_put(pp->bitbang.master); + + platform_device_unregister(pdev); +} + +static struct parport_driver butterfly_driver = { + .name = "spi_butterfly", + .attach = butterfly_attach, + .detach = butterfly_detach, +}; + + +static int __init butterfly_init(void) +{ + return parport_register_driver(&butterfly_driver); +} +device_initcall(butterfly_init); + +static void __exit butterfly_exit(void) +{ + parport_unregister_driver(&butterfly_driver); +} +module_exit(butterfly_exit); + +MODULE_LICENSE("GPL"); diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h new file mode 100644 index 000000000000..72261e0f2ac1 --- /dev/null +++ b/include/linux/spi/ads7846.h @@ -0,0 +1,18 @@ +/* linux/spi/ads7846.h */ + +/* Touchscreen characteristics vary between boards and models. The + * platform_data for the device's "struct device" holds this information. + * + * It's OK if the min/max values are zero. + */ +struct ads7846_platform_data { + u16 model; /* 7843, 7845, 7846. */ + u16 vref_delay_usecs; /* 0 for external vref; etc */ + u16 x_plate_ohms; + u16 y_plate_ohms; + + u16 x_min, x_max; + u16 y_min, y_max; + u16 pressure_min, pressure_max; +}; + diff --git a/include/linux/spi/flash.h b/include/linux/spi/flash.h new file mode 100644 index 000000000000..3f22932e67a4 --- /dev/null +++ b/include/linux/spi/flash.h @@ -0,0 +1,31 @@ +#ifndef LINUX_SPI_FLASH_H +#define LINUX_SPI_FLASH_H + +struct mtd_partition; + +/** + * struct flash_platform_data: board-specific flash data + * @name: optional flash device name (eg, as used with mtdparts=) + * @parts: optional array of mtd_partitions for static partitioning + * @nr_parts: number of mtd_partitions for static partitoning + * @type: optional flash device type (e.g. m25p80 vs m25p64), for use + * with chips that can't be queried for JEDEC or other IDs + * + * Board init code (in arch/.../mach-xxx/board-yyy.c files) can + * provide information about SPI flash parts (such as DataFlash) to + * help set up the device and its appropriate default partitioning. + * + * Note that for DataFlash, sizes for pages, blocks, and sectors are + * rarely powers of two; and partitions should be sector-aligned. + */ +struct flash_platform_data { + char *name; + struct mtd_partition *parts; + unsigned int nr_parts; + + char *type; + + /* we'll likely add more ... use JEDEC IDs, etc */ +}; + +#endif diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h new file mode 100644 index 000000000000..b05f1463a267 --- /dev/null +++ b/include/linux/spi/spi.h @@ -0,0 +1,668 @@ +/* + * Copyright (C) 2005 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __LINUX_SPI_H +#define __LINUX_SPI_H + +/* + * INTERFACES between SPI master-side drivers and SPI infrastructure. + * (There's no SPI slave support for Linux yet...) + */ +extern struct bus_type spi_bus_type; + +/** + * struct spi_device - Master side proxy for an SPI slave device + * @dev: Driver model representation of the device. + * @master: SPI controller used with the device. + * @max_speed_hz: Maximum clock rate to be used with this chip + * (on this board); may be changed by the device's driver. + * @chip-select: Chipselect, distinguishing chips handled by "master". + * @mode: The spi mode defines how data is clocked out and in. + * This may be changed by the device's driver. + * @bits_per_word: Data transfers involve one or more words; word sizes + * like eight or 12 bits are common. In-memory wordsizes are + * powers of two bytes (e.g. 20 bit samples use 32 bits). + * This may be changed by the device's driver. + * @irq: Negative, or the number passed to request_irq() to receive + * interrupts from this device. + * @controller_state: Controller's runtime state + * @controller_data: Board-specific definitions for controller, such as + * FIFO initialization parameters; from board_info.controller_data + * + * An spi_device is used to interchange data between an SPI slave + * (usually a discrete chip) and CPU memory. + * + * In "dev", the platform_data is used to hold information about this + * device that's meaningful to the device's protocol driver, but not + * to its controller. One example might be an identifier for a chip + * variant with slightly different functionality. + */ +struct spi_device { + struct device dev; + struct spi_master *master; + u32 max_speed_hz; + u8 chip_select; + u8 mode; +#define SPI_CPHA 0x01 /* clock phase */ +#define SPI_CPOL 0x02 /* clock polarity */ +#define SPI_MODE_0 (0|0) /* (original MicroWire) */ +#define SPI_MODE_1 (0|SPI_CPHA) +#define SPI_MODE_2 (SPI_CPOL|0) +#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA) +#define SPI_CS_HIGH 0x04 /* chipselect active high? */ + u8 bits_per_word; + int irq; + void *controller_state; + void *controller_data; + const char *modalias; + + // likely need more hooks for more protocol options affecting how + // the controller talks to each chip, like: + // - bit order (default is wordwise msb-first) + // - memory packing (12 bit samples into low bits, others zeroed) + // - priority + // - drop chipselect after each word + // - chipselect delays + // - ... +}; + +static inline struct spi_device *to_spi_device(struct device *dev) +{ + return dev ? container_of(dev, struct spi_device, dev) : NULL; +} + +/* most drivers won't need to care about device refcounting */ +static inline struct spi_device *spi_dev_get(struct spi_device *spi) +{ + return (spi && get_device(&spi->dev)) ? spi : NULL; +} + +static inline void spi_dev_put(struct spi_device *spi) +{ + if (spi) + put_device(&spi->dev); +} + +/* ctldata is for the bus_master driver's runtime state */ +static inline void *spi_get_ctldata(struct spi_device *spi) +{ + return spi->controller_state; +} + +static inline void spi_set_ctldata(struct spi_device *spi, void *state) +{ + spi->controller_state = state; +} + + +struct spi_message; + + + +struct spi_driver { + int (*probe)(struct spi_device *spi); + int (*remove)(struct spi_device *spi); + void (*shutdown)(struct spi_device *spi); + int (*suspend)(struct spi_device *spi, pm_message_t mesg); + int (*resume)(struct spi_device *spi); + struct device_driver driver; +}; + +static inline struct spi_driver *to_spi_driver(struct device_driver *drv) +{ + return drv ? container_of(drv, struct spi_driver, driver) : NULL; +} + +extern int spi_register_driver(struct spi_driver *sdrv); + +static inline void spi_unregister_driver(struct spi_driver *sdrv) +{ + if (!sdrv) + return; + driver_unregister(&sdrv->driver); +} + + + +/** + * struct spi_master - interface to SPI master controller + * @cdev: class interface to this driver + * @bus_num: board-specific (and often SOC-specific) identifier for a + * given SPI controller. + * @num_chipselect: chipselects are used to distinguish individual + * SPI slaves, and are numbered from zero to num_chipselects. + * each slave has a chipselect signal, but it's common that not + * every chipselect is connected to a slave. + * @setup: updates the device mode and clocking records used by a + * device's SPI controller; protocol code may call this. + * @transfer: adds a message to the controller's transfer queue. + * @cleanup: frees controller-specific state + * + * Each SPI master controller can communicate with one or more spi_device + * children. These make a small bus, sharing MOSI, MISO and SCK signals + * but not chip select signals. Each device may be configured to use a + * different clock rate, since those shared signals are ignored unless + * the chip is selected. + * + * The driver for an SPI controller manages access to those devices through + * a queue of spi_message transactions, copyin data between CPU memory and + * an SPI slave device). For each such message it queues, it calls the + * message's completion function when the transaction completes. + */ +struct spi_master { + struct class_device cdev; + + /* other than zero (== assign one dynamically), bus_num is fully + * board-specific. usually that simplifies to being SOC-specific. + * example: one SOC has three SPI controllers, numbered 1..3, + * and one board's schematics might show it using SPI-2. software + * would normally use bus_num=2 for that controller. + */ + u16 bus_num; + + /* chipselects will be integral to many controllers; some others + * might use board-specific GPIOs. + */ + u16 num_chipselect; + + /* setup mode and clock, etc (spi driver may call many times) */ + int (*setup)(struct spi_device *spi); + + /* bidirectional bulk transfers + * + * + The transfer() method may not sleep; its main role is + * just to add the message to the queue. + * + For now there's no remove-from-queue operation, or + * any other request management + * + To a given spi_device, message queueing is pure fifo + * + * + The master's main job is to process its message queue, + * selecting a chip then transferring data + * + If there are multiple spi_device children, the i/o queue + * arbitration algorithm is unspecified (round robin, fifo, + * priority, reservations, preemption, etc) + * + * + Chipselect stays active during the entire message + * (unless modified by spi_transfer.cs_change != 0). + * + The message transfers use clock and SPI mode parameters + * previously established by setup() for this device + */ + int (*transfer)(struct spi_device *spi, + struct spi_message *mesg); + + /* called on release() to free memory provided by spi_master */ + void (*cleanup)(const struct spi_device *spi); +}; + +static inline void *spi_master_get_devdata(struct spi_master *master) +{ + return class_get_devdata(&master->cdev); +} + +static inline void spi_master_set_devdata(struct spi_master *master, void *data) +{ + class_set_devdata(&master->cdev, data); +} + +static inline struct spi_master *spi_master_get(struct spi_master *master) +{ + if (!master || !class_device_get(&master->cdev)) + return NULL; + return master; +} + +static inline void spi_master_put(struct spi_master *master) +{ + if (master) + class_device_put(&master->cdev); +} + + +/* the spi driver core manages memory for the spi_master classdev */ +extern struct spi_master * +spi_alloc_master(struct device *host, unsigned size); + +extern int spi_register_master(struct spi_master *master); +extern void spi_unregister_master(struct spi_master *master); + +extern struct spi_master *spi_busnum_to_master(u16 busnum); + +/*---------------------------------------------------------------------------*/ + +/* + * I/O INTERFACE between SPI controller and protocol drivers + * + * Protocol drivers use a queue of spi_messages, each transferring data + * between the controller and memory buffers. + * + * The spi_messages themselves consist of a series of read+write transfer + * segments. Those segments always read the same number of bits as they + * write; but one or the other is easily ignored by passing a null buffer + * pointer. (This is unlike most types of I/O API, because SPI hardware + * is full duplex.) + * + * NOTE: Allocation of spi_transfer and spi_message memory is entirely + * up to the protocol driver, which guarantees the integrity of both (as + * well as the data buffers) for as long as the message is queued. + */ + +/** + * struct spi_transfer - a read/write buffer pair + * @tx_buf: data to be written (dma-safe memory), or NULL + * @rx_buf: data to be read (dma-safe memory), or NULL + * @tx_dma: DMA address of tx_buf, if spi_message.is_dma_mapped + * @rx_dma: DMA address of rx_buf, if spi_message.is_dma_mapped + * @len: size of rx and tx buffers (in bytes) + * @cs_change: affects chipselect after this transfer completes + * @delay_usecs: microseconds to delay after this transfer before + * (optionally) changing the chipselect status, then starting + * the next transfer or completing this spi_message. + * @transfer_list: transfers are sequenced through spi_message.transfers + * + * SPI transfers always write the same number of bytes as they read. + * Protocol drivers should always provide rx_buf and/or tx_buf. + * In some cases, they may also want to provide DMA addresses for + * the data being transferred; that may reduce overhead, when the + * underlying driver uses dma. + * + * If the transmit buffer is null, undefined data will be shifted out + * while filling rx_buf. If the receive buffer is null, the data + * shifted in will be discarded. Only "len" bytes shift out (or in). + * It's an error to try to shift out a partial word. (For example, by + * shifting out three bytes with word size of sixteen or twenty bits; + * the former uses two bytes per word, the latter uses four bytes.) + * + * All SPI transfers start with the relevant chipselect active. Normally + * it stays selected until after the last transfer in a message. Drivers + * can affect the chipselect signal using cs_change: + * + * (i) If the transfer isn't the last one in the message, this flag is + * used to make the chipselect briefly go inactive in the middle of the + * message. Toggling chipselect in this way may be needed to terminate + * a chip command, letting a single spi_message perform all of group of + * chip transactions together. + * + * (ii) When the transfer is the last one in the message, the chip may + * stay selected until the next transfer. This is purely a performance + * hint; the controller driver may need to select a different device + * for the next message. + * + * The code that submits an spi_message (and its spi_transfers) + * to the lower layers is responsible for managing its memory. + * Zero-initialize every field you don't set up explicitly, to + * insulate against future API updates. After you submit a message + * and its transfers, ignore them until its completion callback. + */ +struct spi_transfer { + /* it's ok if tx_buf == rx_buf (right?) + * for MicroWire, one buffer must be null + * buffers must work with dma_*map_single() calls, unless + * spi_message.is_dma_mapped reports a pre-existing mapping + */ + const void *tx_buf; + void *rx_buf; + unsigned len; + + dma_addr_t tx_dma; + dma_addr_t rx_dma; + + unsigned cs_change:1; + u16 delay_usecs; + + struct list_head transfer_list; +}; + +/** + * struct spi_message - one multi-segment SPI transaction + * @transfers: list of transfer segments in this transaction + * @spi: SPI device to which the transaction is queued + * @is_dma_mapped: if true, the caller provided both dma and cpu virtual + * addresses for each transfer buffer + * @complete: called to report transaction completions + * @context: the argument to complete() when it's called + * @actual_length: the total number of bytes that were transferred in all + * successful segments + * @status: zero for success, else negative errno + * @queue: for use by whichever driver currently owns the message + * @state: for use by whichever driver currently owns the message + * + * An spi_message is used to execute an atomic sequence of data transfers, + * each represented by a struct spi_transfer. The sequence is "atomic" + * in the sense that no other spi_message may use that SPI bus until that + * sequence completes. On some systems, many such sequences can execute as + * as single programmed DMA transfer. On all systems, these messages are + * queued, and might complete after transactions to other devices. Messages + * sent to a given spi_device are alway executed in FIFO order. + * + * The code that submits an spi_message (and its spi_transfers) + * to the lower layers is responsible for managing its memory. + * Zero-initialize every field you don't set up explicitly, to + * insulate against future API updates. After you submit a message + * and its transfers, ignore them until its completion callback. + */ +struct spi_message { + struct list_head transfers; + + struct spi_device *spi; + + unsigned is_dma_mapped:1; + + /* REVISIT: we might want a flag affecting the behavior of the + * last transfer ... allowing things like "read 16 bit length L" + * immediately followed by "read L bytes". Basically imposing + * a specific message scheduling algorithm. + * + * Some controller drivers (message-at-a-time queue processing) + * could provide that as their default scheduling algorithm. But + * others (with multi-message pipelines) could need a flag to + * tell them about such special cases. + */ + + /* completion is reported through a callback */ + void (*complete)(void *context); + void *context; + unsigned actual_length; + int status; + + /* for optional use by whatever driver currently owns the + * spi_message ... between calls to spi_async and then later + * complete(), that's the spi_master controller driver. + */ + struct list_head queue; + void *state; +}; + +static inline void spi_message_init(struct spi_message *m) +{ + memset(m, 0, sizeof *m); + INIT_LIST_HEAD(&m->transfers); +} + +static inline void +spi_message_add_tail(struct spi_transfer *t, struct spi_message *m) +{ + list_add_tail(&t->transfer_list, &m->transfers); +} + +static inline void +spi_transfer_del(struct spi_transfer *t) +{ + list_del(&t->transfer_list); +} + +/* It's fine to embed message and transaction structures in other data + * structures so long as you don't free them while they're in use. + */ + +static inline struct spi_message *spi_message_alloc(unsigned ntrans, gfp_t flags) +{ + struct spi_message *m; + + m = kzalloc(sizeof(struct spi_message) + + ntrans * sizeof(struct spi_transfer), + flags); + if (m) { + int i; + struct spi_transfer *t = (struct spi_transfer *)(m + 1); + + INIT_LIST_HEAD(&m->transfers); + for (i = 0; i < ntrans; i++, t++) + spi_message_add_tail(t, m); + } + return m; +} + +static inline void spi_message_free(struct spi_message *m) +{ + kfree(m); +} + +/** + * spi_setup -- setup SPI mode and clock rate + * @spi: the device whose settings are being modified + * + * SPI protocol drivers may need to update the transfer mode if the + * device doesn't work with the mode 0 default. They may likewise need + * to update clock rates or word sizes from initial values. This function + * changes those settings, and must be called from a context that can sleep. + * The changes take effect the next time the device is selected and data + * is transferred to or from it. + */ +static inline int +spi_setup(struct spi_device *spi) +{ + return spi->master->setup(spi); +} + + +/** + * spi_async -- asynchronous SPI transfer + * @spi: device with which data will be exchanged + * @message: describes the data transfers, including completion callback + * + * This call may be used in_irq and other contexts which can't sleep, + * as well as from task contexts which can sleep. + * + * The completion callback is invoked in a context which can't sleep. + * Before that invocation, the value of message->status is undefined. + * When the callback is issued, message->status holds either zero (to + * indicate complete success) or a negative error code. After that + * callback returns, the driver which issued the transfer request may + * deallocate the associated memory; it's no longer in use by any SPI + * core or controller driver code. + * + * Note that although all messages to a spi_device are handled in + * FIFO order, messages may go to different devices in other orders. + * Some device might be higher priority, or have various "hard" access + * time requirements, for example. + * + * On detection of any fault during the transfer, processing of + * the entire message is aborted, and the device is deselected. + * Until returning from the associated message completion callback, + * no other spi_message queued to that device will be processed. + * (This rule applies equally to all the synchronous transfer calls, + * which are wrappers around this core asynchronous primitive.) + */ +static inline int +spi_async(struct spi_device *spi, struct spi_message *message) +{ + message->spi = spi; + return spi->master->transfer(spi, message); +} + +/*---------------------------------------------------------------------------*/ + +/* All these synchronous SPI transfer routines are utilities layered + * over the core async transfer primitive. Here, "synchronous" means + * they will sleep uninterruptibly until the async transfer completes. + */ + +extern int spi_sync(struct spi_device *spi, struct spi_message *message); + +/** + * spi_write - SPI synchronous write + * @spi: device to which data will be written + * @buf: data buffer + * @len: data buffer size + * + * This writes the buffer and returns zero or a negative error code. + * Callable only from contexts that can sleep. + */ +static inline int +spi_write(struct spi_device *spi, const u8 *buf, size_t len) +{ + struct spi_transfer t = { + .tx_buf = buf, + .len = len, + }; + struct spi_message m; + + spi_message_init(&m); + spi_message_add_tail(&t, &m); + return spi_sync(spi, &m); +} + +/** + * spi_read - SPI synchronous read + * @spi: device from which data will be read + * @buf: data buffer + * @len: data buffer size + * + * This writes the buffer and returns zero or a negative error code. + * Callable only from contexts that can sleep. + */ +static inline int +spi_read(struct spi_device *spi, u8 *buf, size_t len) +{ + struct spi_transfer t = { + .rx_buf = buf, + .len = len, + }; + struct spi_message m; + + spi_message_init(&m); + spi_message_add_tail(&t, &m); + return spi_sync(spi, &m); +} + +/* this copies txbuf and rxbuf data; for small transfers only! */ +extern int spi_write_then_read(struct spi_device *spi, + const u8 *txbuf, unsigned n_tx, + u8 *rxbuf, unsigned n_rx); + +/** + * spi_w8r8 - SPI synchronous 8 bit write followed by 8 bit read + * @spi: device with which data will be exchanged + * @cmd: command to be written before data is read back + * + * This returns the (unsigned) eight bit number returned by the + * device, or else a negative error code. Callable only from + * contexts that can sleep. + */ +static inline ssize_t spi_w8r8(struct spi_device *spi, u8 cmd) +{ + ssize_t status; + u8 result; + + status = spi_write_then_read(spi, &cmd, 1, &result, 1); + + /* return negative errno or unsigned value */ + return (status < 0) ? status : result; +} + +/** + * spi_w8r16 - SPI synchronous 8 bit write followed by 16 bit read + * @spi: device with which data will be exchanged + * @cmd: command to be written before data is read back + * + * This returns the (unsigned) sixteen bit number returned by the + * device, or else a negative error code. Callable only from + * contexts that can sleep. + * + * The number is returned in wire-order, which is at least sometimes + * big-endian. + */ +static inline ssize_t spi_w8r16(struct spi_device *spi, u8 cmd) +{ + ssize_t status; + u16 result; + + status = spi_write_then_read(spi, &cmd, 1, (u8 *) &result, 2); + + /* return negative errno or unsigned value */ + return (status < 0) ? status : result; +} + +/*---------------------------------------------------------------------------*/ + +/* + * INTERFACE between board init code and SPI infrastructure. + * + * No SPI driver ever sees these SPI device table segments, but + * it's how the SPI core (or adapters that get hotplugged) grows + * the driver model tree. + * + * As a rule, SPI devices can't be probed. Instead, board init code + * provides a table listing the devices which are present, with enough + * information to bind and set up the device's driver. There's basic + * support for nonstatic configurations too; enough to handle adding + * parport adapters, or microcontrollers acting as USB-to-SPI bridges. + */ + +/* board-specific information about each SPI device */ +struct spi_board_info { + /* the device name and module name are coupled, like platform_bus; + * "modalias" is normally the driver name. + * + * platform_data goes to spi_device.dev.platform_data, + * controller_data goes to spi_device.controller_data, + * irq is copied too + */ + char modalias[KOBJ_NAME_LEN]; + const void *platform_data; + void *controller_data; + int irq; + + /* slower signaling on noisy or low voltage boards */ + u32 max_speed_hz; + + + /* bus_num is board specific and matches the bus_num of some + * spi_master that will probably be registered later. + * + * chip_select reflects how this chip is wired to that master; + * it's less than num_chipselect. + */ + u16 bus_num; + u16 chip_select; + + /* ... may need additional spi_device chip config data here. + * avoid stuff protocol drivers can set; but include stuff + * needed to behave without being bound to a driver: + * - chipselect polarity + * - quirks like clock rate mattering when not selected + */ +}; + +#ifdef CONFIG_SPI +extern int +spi_register_board_info(struct spi_board_info const *info, unsigned n); +#else +/* board init code may ignore whether SPI is configured or not */ +static inline int +spi_register_board_info(struct spi_board_info const *info, unsigned n) + { return 0; } +#endif + + +/* If you're hotplugging an adapter with devices (parport, usb, etc) + * use spi_new_device() to describe each device. You can also call + * spi_unregister_device() to start making that device vanish, but + * normally that would be handled by spi_unregister_master(). + */ +extern struct spi_device * +spi_new_device(struct spi_master *, struct spi_board_info *); + +static inline void +spi_unregister_device(struct spi_device *spi) +{ + if (spi) + device_unregister(&spi->dev); +} + +#endif /* __LINUX_SPI_H */ diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h new file mode 100644 index 000000000000..c961fe9bf3eb --- /dev/null +++ b/include/linux/spi/spi_bitbang.h @@ -0,0 +1,135 @@ +#ifndef __SPI_BITBANG_H +#define __SPI_BITBANG_H + +/* + * Mix this utility code with some glue code to get one of several types of + * simple SPI master driver. Two do polled word-at-a-time I/O: + * + * - GPIO/parport bitbangers. Provide chipselect() and txrx_word[](), + * expanding the per-word routines from the inline templates below. + * + * - Drivers for controllers resembling bare shift registers. Provide + * chipselect() and txrx_word[](), with custom setup()/cleanup() methods + * that use your controller's clock and chipselect registers. + * + * Some hardware works well with requests at spi_transfer scope: + * + * - Drivers leveraging smarter hardware, with fifos or DMA; or for half + * duplex (MicroWire) controllers. Provide chipslect() and txrx_bufs(), + * and custom setup()/cleanup() methods. + */ +struct spi_bitbang { + struct workqueue_struct *workqueue; + struct work_struct work; + + spinlock_t lock; + struct list_head queue; + u8 busy; + u8 shutdown; + u8 use_dma; + + struct spi_master *master; + + void (*chipselect)(struct spi_device *spi, int is_on); +#define BITBANG_CS_ACTIVE 1 /* normally nCS, active low */ +#define BITBANG_CS_INACTIVE 0 + + /* txrx_bufs() may handle dma mapping for transfers that don't + * already have one (transfer.{tx,rx}_dma is zero), or use PIO + */ + int (*txrx_bufs)(struct spi_device *spi, struct spi_transfer *t); + + /* txrx_word[SPI_MODE_*]() just looks like a shift register */ + u32 (*txrx_word[4])(struct spi_device *spi, + unsigned nsecs, + u32 word, u8 bits); +}; + +/* you can call these default bitbang->master methods from your custom + * methods, if you like. + */ +extern int spi_bitbang_setup(struct spi_device *spi); +extern void spi_bitbang_cleanup(const struct spi_device *spi); +extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m); + +/* start or stop queue processing */ +extern int spi_bitbang_start(struct spi_bitbang *spi); +extern int spi_bitbang_stop(struct spi_bitbang *spi); + +#endif /* __SPI_BITBANG_H */ + +/*-------------------------------------------------------------------------*/ + +#ifdef EXPAND_BITBANG_TXRX + +/* + * The code that knows what GPIO pins do what should have declared four + * functions, ideally as inlines, before #defining EXPAND_BITBANG_TXRX + * and including this header: + * + * void setsck(struct spi_device *, int is_on); + * void setmosi(struct spi_device *, int is_on); + * int getmiso(struct spi_device *); + * void spidelay(unsigned); + * + * A non-inlined routine would call bitbang_txrx_*() routines. The + * main loop could easily compile down to a handful of instructions, + * especially if the delay is a NOP (to run at peak speed). + * + * Since this is software, the timings may not be exactly what your board's + * chips need ... there may be several reasons you'd need to tweak timings + * in these routines, not just make to make it faster or slower to match a + * particular CPU clock rate. + */ + +static inline u32 +bitbang_txrx_be_cpha0(struct spi_device *spi, + unsigned nsecs, unsigned cpol, + u32 word, u8 bits) +{ + /* if (cpol == 0) this is SPI_MODE_0; else this is SPI_MODE_2 */ + + /* clock starts at inactive polarity */ + for (word <<= (32 - bits); likely(bits); bits--) { + + /* setup MSB (to slave) on trailing edge */ + setmosi(spi, word & (1 << 31)); + spidelay(nsecs); /* T(setup) */ + + setsck(spi, !cpol); + spidelay(nsecs); + + /* sample MSB (from slave) on leading edge */ + word <<= 1; + word |= getmiso(spi); + setsck(spi, cpol); + } + return word; +} + +static inline u32 +bitbang_txrx_be_cpha1(struct spi_device *spi, + unsigned nsecs, unsigned cpol, + u32 word, u8 bits) +{ + /* if (cpol == 0) this is SPI_MODE_1; else this is SPI_MODE_3 */ + + /* clock starts at inactive polarity */ + for (word <<= (32 - bits); likely(bits); bits--) { + + /* setup MSB (to slave) on leading edge */ + setsck(spi, !cpol); + setmosi(spi, word & (1 << 31)); + spidelay(nsecs); /* T(setup) */ + + setsck(spi, cpol); + spidelay(nsecs); + + /* sample MSB (from slave) on trailing edge */ + word <<= 1; + word |= getmiso(spi); + } + return word; +} + +#endif /* EXPAND_BITBANG_TXRX */ |