diff options
| -rw-r--r-- | drivers/hwmon/pmbus/mp2888.c | 13 |
1 files changed, 6 insertions, 7 deletions
diff --git a/drivers/hwmon/pmbus/mp2888.c b/drivers/hwmon/pmbus/mp2888.c index 8ecd4adfef40..24e5194706cf 100644 --- a/drivers/hwmon/pmbus/mp2888.c +++ b/drivers/hwmon/pmbus/mp2888.c @@ -34,7 +34,7 @@ struct mp2888_data { int curr_sense_gain; }; -#define to_mp2888_data(x) container_of(x, struct mp2888_data, info) +#define to_mp2888_data(x) container_of(x, struct mp2888_data, info) static int mp2888_read_byte_data(struct i2c_client *client, int page, int reg) { @@ -109,7 +109,7 @@ mp2888_read_phase(struct i2c_client *client, struct mp2888_data *data, int page, * - Kcs is the DrMOS current sense gain of power stage, which is obtained from the * register MP2888_MFR_VR_CONFIG1, bits 13-12 with the following selection of DrMOS * (data->curr_sense_gain): - * 00b - 5µA/A, 01b - 8.5µA/A, 10b - 9.7µA/A, 11b - 10µA/A. + * 00b - 8.5µA/A, 01b - 9.7µA/A, 1b - 10µA/A, 11b - 5µA/A. * - Rcs is the internal phase current sense resistor. This parameter depends on hardware * assembly. By default it is set to 1kΩ. In case of different assembly, user should * scale this parameter by dividing it by Rcs. @@ -118,10 +118,9 @@ mp2888_read_phase(struct i2c_client *client, struct mp2888_data *data, int page, * because sampling of current occurrence of bit weight has a big deviation, especially for * light load. */ - ret = DIV_ROUND_CLOSEST(ret * 100 - 9800, data->curr_sense_gain); - ret = (data->phase_curr_resolution) ? ret * 2 : ret; + ret = DIV_ROUND_CLOSEST(ret * 200 - 19600, data->curr_sense_gain); /* Scale according to total current resolution. */ - ret = (data->total_curr_resolution) ? ret * 8 : ret * 4; + ret = (data->total_curr_resolution) ? ret * 2 : ret; return ret; } @@ -212,7 +211,7 @@ static int mp2888_read_word_data(struct i2c_client *client, int page, int phase, ret = pmbus_read_word_data(client, page, phase, reg); if (ret < 0) return ret; - ret = data->total_curr_resolution ? ret * 2 : ret; + ret = data->total_curr_resolution ? ret : DIV_ROUND_CLOSEST(ret, 2); break; case PMBUS_POUT_OP_WARN_LIMIT: ret = pmbus_read_word_data(client, page, phase, reg); @@ -223,7 +222,7 @@ static int mp2888_read_word_data(struct i2c_client *client, int page, int phase, * set 1. Actual power is reported with 0.5W or 1W respectively resolution. Scaling * is needed to match both. */ - ret = data->total_curr_resolution ? ret * 4 : ret * 2; + ret = data->total_curr_resolution ? ret * 2 : ret; break; /* * The below registers are not implemented by device or implemented not according to the |