diff options
1196 files changed, 10908 insertions, 33085 deletions
@@ -1910,6 +1910,15 @@ S: 660 Harvard Ave. #7 S: Santa Clara, CA 95051 S: USA +N: Kukjin Kim +E: kgene@kernel.org +D: Samsung S3C, S5P and Exynos ARM architectures + +N: Sangbeom Kim +E: sbkim73@samsung.com +D: Samsung SoC Audio (ASoC) drivers +D: Samsung PMIC (RTC, regulators, MFD) drivers + N: Russell King E: rmk@arm.linux.org.uk D: Linux/arm integrator, maintainer & hacker diff --git a/Documentation/ABI/README b/Documentation/ABI/README index 3121029dce21..8bac9cb09a6d 100644 --- a/Documentation/ABI/README +++ b/Documentation/ABI/README @@ -32,7 +32,7 @@ The different levels of stability are: layout of the files below for details on how to do this.) obsolete/ - This directory documents interfaces that are still remaining in + This directory documents interfaces that are still remaining in the kernel, but are marked to be removed at some later point in time. The description of the interface will document the reason why it is obsolete and when it can be expected to be removed. @@ -58,6 +58,14 @@ Users: All users of this interface who wish to be notified when be changed further. +Note: + The fields should be use a simple notation, compatible with ReST markup. + Also, the file **should not** have a top-level index, like:: + + === + foo + === + How things move between levels: Interfaces in stable may move to obsolete, as long as the proper diff --git a/Documentation/ABI/obsolete/sysfs-class-dax b/Documentation/ABI/obsolete/sysfs-class-dax index 2cb9fc5e8bd1..0faf1354cd05 100644 --- a/Documentation/ABI/obsolete/sysfs-class-dax +++ b/Documentation/ABI/obsolete/sysfs-class-dax @@ -8,11 +8,11 @@ Description: Device DAX is the device-centric analogue of Filesystem system. Device DAX is strict, precise and predictable. Specifically this interface: - 1/ Guarantees fault granularity with respect to a given - page size (pte, pmd, or pud) set at configuration time. + 1. Guarantees fault granularity with respect to a given + page size (pte, pmd, or pud) set at configuration time. - 2/ Enforces deterministic behavior by being strict about - what fault scenarios are supported. + 2. Enforces deterministic behavior by being strict about + what fault scenarios are supported. The /sys/class/dax/ interface enumerates all the device-dax instances in the system. The ABI is diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra index 5d41ebadf15e..66545c587a64 100644 --- a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra +++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra @@ -7,10 +7,13 @@ Description: It is possible to switch the cpi setting of the mouse with the setting reported by the mouse. This number has to be further processed to receive the real dpi value: + ===== ==== VALUE DPI + ===== ==== 1 400 2 800 4 1600 + ===== ==== This file is readonly. Has never been used. If bookkeeping is done, it's done in userland tools. diff --git a/Documentation/ABI/obsolete/sysfs-gpio b/Documentation/ABI/obsolete/sysfs-gpio index e0d4e5e2dd90..b8b0fd341c17 100644 --- a/Documentation/ABI/obsolete/sysfs-gpio +++ b/Documentation/ABI/obsolete/sysfs-gpio @@ -13,6 +13,8 @@ Description: GPIOs are identified as they are inside the kernel, using integers in the range 0..INT_MAX. See Documentation/admin-guide/gpio for more information. + :: + /sys/class/gpio /export ... asks the kernel to export a GPIO to userspace /unexport ... to return a GPIO to the kernel diff --git a/Documentation/ABI/removed/devfs b/Documentation/ABI/removed/devfs index 0020c49933c4..24fb35adf277 100644 --- a/Documentation/ABI/removed/devfs +++ b/Documentation/ABI/removed/devfs @@ -5,6 +5,7 @@ Description: devfs has been unmaintained for a number of years, has unfixable races, contains a naming policy within the kernel that is against the LSB, and can be replaced by using udev. + The files fs/devfs/*, include/linux/devfs_fs*.h were removed, along with the assorted devfs function calls throughout the kernel tree. diff --git a/Documentation/ABI/removed/raw1394 b/Documentation/ABI/removed/raw1394 index ec333e676322..9ec7ec493920 100644 --- a/Documentation/ABI/removed/raw1394 +++ b/Documentation/ABI/removed/raw1394 @@ -7,6 +7,7 @@ Description: to implement sensible device security policies, and its low level of abstraction that required userspace clients to duplicate much of the kernel's ieee1394 core functionality. + Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of firewire-core. diff --git a/Documentation/ABI/removed/sysfs-class-rfkill b/Documentation/ABI/removed/sysfs-class-rfkill index 9c08c7f98ffb..f25174eafd55 100644 --- a/Documentation/ABI/removed/sysfs-class-rfkill +++ b/Documentation/ABI/removed/sysfs-class-rfkill @@ -10,4 +10,4 @@ Description: This file was deprecated because there no longer was a way to claim just control over a single rfkill instance. This file was scheduled to be removed in 2012, and was removed in 2016. -Values: 0: Kernel handles events +Values: 0: Kernel handles events diff --git a/Documentation/ABI/removed/video1394 b/Documentation/ABI/removed/video1394 index c39c25aee77b..1905d35a6619 100644 --- a/Documentation/ABI/removed/video1394 +++ b/Documentation/ABI/removed/video1394 @@ -8,6 +8,7 @@ Description: performance issues in its first generation. Any video1394 user had to use raw1394 + libraw1394 too because video1394 did not provide asynchronous I/O for device discovery and configuration. + Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of firewire-core. diff --git a/Documentation/ABI/stable/firewire-cdev b/Documentation/ABI/stable/firewire-cdev index f72ed653878a..261f85b13154 100644 --- a/Documentation/ABI/stable/firewire-cdev +++ b/Documentation/ABI/stable/firewire-cdev @@ -14,13 +14,17 @@ Description: Each /dev/fw* is associated with one IEEE 1394 node, which can be remote or local nodes. Operations on a /dev/fw* file have different scope: + - The 1394 node which is associated with the file: + - Asynchronous request transmission - Get the Configuration ROM - Query node ID - Query maximum speed of the path between this node and local node + - The 1394 bus (i.e. "card") to which the node is attached to: + - Isochronous stream transmission and reception - Asynchronous stream transmission and reception - Asynchronous broadcast request transmission @@ -31,7 +35,9 @@ Description: manager - Query cycle time - Bus reset initiation, bus reset event reception + - All 1394 buses: + - Allocation of IEEE 1212 address ranges on the local link layers, reception of inbound requests to such an address range, asynchronous response transmission @@ -43,6 +49,7 @@ Description: userland implement different access permission models, some operations are restricted to /dev/fw* files that are associated with a local node: + - Addition of descriptors or directories to the local nodes' Configuration ROM - PHY packet transmission and reception @@ -55,50 +62,50 @@ Description: The following file operations are supported: open(2) - Currently the only useful flags are O_RDWR. + Currently the only useful flags are O_RDWR. ioctl(2) - Initiate various actions. Some take immediate effect, others - are performed asynchronously while or after the ioctl returns. - See the inline documentation in <linux/firewire-cdev.h> for - descriptions of all ioctls. + Initiate various actions. Some take immediate effect, others + are performed asynchronously while or after the ioctl returns. + See the inline documentation in <linux/firewire-cdev.h> for + descriptions of all ioctls. poll(2), select(2), epoll_wait(2) etc. - Watch for events to become available to be read. + Watch for events to become available to be read. read(2) - Receive various events. There are solicited events like - outbound asynchronous transaction completion or isochronous - buffer completion, and unsolicited events such as bus resets, - request reception, or PHY packet reception. Always use a read - buffer which is large enough to receive the largest event that - could ever arrive. See <linux/firewire-cdev.h> for descriptions - of all event types and for which ioctls affect reception of - events. + Receive various events. There are solicited events like + outbound asynchronous transaction completion or isochronous + buffer completion, and unsolicited events such as bus resets, + request reception, or PHY packet reception. Always use a read + buffer which is large enough to receive the largest event that + could ever arrive. See <linux/firewire-cdev.h> for descriptions + of all event types and for which ioctls affect reception of + events. mmap(2) - Allocate a DMA buffer for isochronous reception or transmission - and map it into the process address space. The arguments should - be used as follows: addr = NULL, length = the desired buffer - size, i.e. number of packets times size of largest packet, - prot = at least PROT_READ for reception and at least PROT_WRITE - for transmission, flags = MAP_SHARED, fd = the handle to the - /dev/fw*, offset = 0. + Allocate a DMA buffer for isochronous reception or transmission + and map it into the process address space. The arguments should + be used as follows: addr = NULL, length = the desired buffer + size, i.e. number of packets times size of largest packet, + prot = at least PROT_READ for reception and at least PROT_WRITE + for transmission, flags = MAP_SHARED, fd = the handle to the + /dev/fw*, offset = 0. Isochronous reception works in packet-per-buffer fashion except for multichannel reception which works in buffer-fill mode. munmap(2) - Unmap the isochronous I/O buffer from the process address space. + Unmap the isochronous I/O buffer from the process address space. close(2) - Besides stopping and freeing I/O contexts that were associated - with the file descriptor, back out any changes to the local - nodes' Configuration ROM. Deallocate isochronous channels and - bandwidth at the IRM that were marked for kernel-assisted - re- and deallocation. - -Users: libraw1394 - libdc1394 - libhinawa + Besides stopping and freeing I/O contexts that were associated + with the file descriptor, back out any changes to the local + nodes' Configuration ROM. Deallocate isochronous channels and + bandwidth at the IRM that were marked for kernel-assisted + re- and deallocation. + +Users: libraw1394; + libdc1394; + libhinawa; tools like linux-firewire-utils, fwhack, ... diff --git a/Documentation/ABI/stable/sysfs-acpi-pmprofile b/Documentation/ABI/stable/sysfs-acpi-pmprofile index 964c7a8afb26..2d6314f0e4e4 100644 --- a/Documentation/ABI/stable/sysfs-acpi-pmprofile +++ b/Documentation/ABI/stable/sysfs-acpi-pmprofile @@ -1,22 +1,26 @@ -What: /sys/firmware/acpi/pm_profile +What: /sys/firmware/acpi/pm_profile Date: 03-Nov-2011 KernelVersion: v3.2 Contact: linux-acpi@vger.kernel.org -Description: The ACPI pm_profile sysfs interface exports the platform +Description: The ACPI pm_profile sysfs interface exports the platform power management (and performance) requirement expectations as provided by BIOS. The integer value is directly passed as retrieved from the FADT ACPI table. -Values: For possible values see ACPI specification: + +Values: For possible values see ACPI specification: 5.2.9 Fixed ACPI Description Table (FADT) Field: Preferred_PM_Profile Currently these values are defined by spec: - 0 Unspecified - 1 Desktop - 2 Mobile - 3 Workstation - 4 Enterprise Server - 5 SOHO Server - 6 Appliance PC - 7 Performance Server + + == ================= + 0 Unspecified + 1 Desktop + 2 Mobile + 3 Workstation + 4 Enterprise Server + 5 SOHO Server + 6 Appliance PC + 7 Performance Server >7 Reserved + == ================= diff --git a/Documentation/ABI/stable/sysfs-bus-firewire b/Documentation/ABI/stable/sysfs-bus-firewire index 41e5a0cd1e3e..9ac9eddb82ef 100644 --- a/Documentation/ABI/stable/sysfs-bus-firewire +++ b/Documentation/ABI/stable/sysfs-bus-firewire @@ -47,6 +47,7 @@ Description: IEEE 1394 node device attribute. Read-only and immutable. Values: 1: The sysfs entry represents a local node (a controller card). + 0: The sysfs entry represents a remote node. @@ -125,7 +126,9 @@ Description: Read-only attribute, immutable during the target's lifetime. Format, as exposed by firewire-sbp2 since 2.6.22, May 2007: Colon-separated hexadecimal string representations of + u64 EUI-64 : u24 directory_ID : u16 LUN + without 0x prefixes, without whitespace. The former sbp2 driver (removed in 2.6.37 after being superseded by firewire-sbp2) used a somewhat shorter format which was not as close to SAM. diff --git a/Documentation/ABI/stable/sysfs-bus-nvmem b/Documentation/ABI/stable/sysfs-bus-nvmem index 9ffba8576f7b..c399323f37de 100644 --- a/Documentation/ABI/stable/sysfs-bus-nvmem +++ b/Documentation/ABI/stable/sysfs-bus-nvmem @@ -9,13 +9,14 @@ Description: Note: This file is only present if CONFIG_NVMEM_SYSFS is enabled - ex: - hexdump /sys/bus/nvmem/devices/qfprom0/nvmem + ex:: - 0000000 0000 0000 0000 0000 0000 0000 0000 0000 - * - 00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00 - 0000000 0000 0000 0000 0000 0000 0000 0000 0000 - ... - * - 0001000 + hexdump /sys/bus/nvmem/devices/qfprom0/nvmem + + 0000000 0000 0000 0000 0000 0000 0000 0000 0000 + * + 00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00 + 0000000 0000 0000 0000 0000 0000 0000 0000 0000 + ... + * + 0001000 diff --git a/Documentation/ABI/stable/sysfs-bus-usb b/Documentation/ABI/stable/sysfs-bus-usb index b832eeff9999..cad4bc232520 100644 --- a/Documentation/ABI/stable/sysfs-bus-usb +++ b/Documentation/ABI/stable/sysfs-bus-usb @@ -50,8 +50,10 @@ Description: Tools can use this file and the connected_duration file to compute the percentage of time that a device has been active. - For example, - echo $((100 * `cat active_duration` / `cat connected_duration`)) + For example:: + + echo $((100 * `cat active_duration` / `cat connected_duration`)) + will give an integer percentage. Note that this does not account for counter wrap. Users: diff --git a/Documentation/ABI/stable/sysfs-bus-vmbus b/Documentation/ABI/stable/sysfs-bus-vmbus index 8e8d167eca31..c27b7b89477c 100644 --- a/Documentation/ABI/stable/sysfs-bus-vmbus +++ b/Documentation/ABI/stable/sysfs-bus-vmbus @@ -63,13 +63,6 @@ Contact: Stephen Hemminger <sthemmin@microsoft.com> Description: VCPU (sub)channel is affinitized to Users: tools/hv/lsvmbus and other debugging tools -What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/cpu -Date: September. 2017 -KernelVersion: 4.14 -Contact: Stephen Hemminger <sthemmin@microsoft.com> -Description: VCPU (sub)channel is affinitized to -Users: tools/hv/lsvmbus and other debugging tools - What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/in_mask Date: September. 2017 KernelVersion: 4.14 diff --git a/Documentation/ABI/stable/sysfs-bus-w1 b/Documentation/ABI/stable/sysfs-bus-w1 index 992dfb183ed0..5cd5e872bcae 100644 --- a/Documentation/ABI/stable/sysfs-bus-w1 +++ b/Documentation/ABI/stable/sysfs-bus-w1 @@ -6,6 +6,7 @@ Description: Bus scanning interval, microseconds component. control systems are attached/generate presence for as short as 100 ms - hence the tens-to-hundreds milliseconds scan intervals are required. + see Documentation/w1/w1-generic.rst for detailed information. Users: any user space application which wants to know bus scanning interval diff --git a/Documentation/ABI/stable/sysfs-class-backlight b/Documentation/ABI/stable/sysfs-class-backlight index 70302f370e7e..023fb52645f8 100644 --- a/Documentation/ABI/stable/sysfs-class-backlight +++ b/Documentation/ABI/stable/sysfs-class-backlight @@ -4,6 +4,7 @@ KernelVersion: 2.6.12 Contact: Richard Purdie <rpurdie@rpsys.net> Description: Control BACKLIGHT power, values are FB_BLANK_* from fb.h + - FB_BLANK_UNBLANK (0) : power on. - FB_BLANK_POWERDOWN (4) : power off Users: HAL diff --git a/Documentation/ABI/stable/sysfs-class-infiniband b/Documentation/ABI/stable/sysfs-class-infiniband index 87b11f91b425..348c4ac803ad 100644 --- a/Documentation/ABI/stable/sysfs-class-infiniband +++ b/Documentation/ABI/stable/sysfs-class-infiniband @@ -8,12 +8,14 @@ Date: Apr, 2005 KernelVersion: v2.6.12 Contact: linux-rdma@vger.kernel.org Description: + =============== =========================================== node_type: (RO) Node type (CA, RNIC, usNIC, usNIC UDP, switch or router) node_guid: (RO) Node GUID sys_image_guid: (RO) System image GUID + =============== =========================================== What: /sys/class/infiniband/<device>/node_desc @@ -47,6 +49,7 @@ KernelVersion: v2.6.12 Contact: linux-rdma@vger.kernel.org Description: + =============== =============================================== lid: (RO) Port LID rate: (RO) Port data rate (active width * active @@ -66,8 +69,9 @@ Description: cap_mask: (RO) Port capability mask. 2 bits here are settable- IsCommunicationManagementSupported - (set when CM module is loaded) and IsSM (set via - open of issmN file). + (set when CM module is loaded) and IsSM (set + via open of issmN file). + =============== =============================================== What: /sys/class/infiniband/<device>/ports/<port-num>/link_layer @@ -103,8 +107,7 @@ Date: Apr, 2005 KernelVersion: v2.6.12 Contact: linux-rdma@vger.kernel.org Description: - Errors info: - ----------- + **Errors info**: symbol_error: (RO) Total number of minor link errors detected on one or more physical lanes. @@ -142,8 +145,7 @@ Description: intervention. It can also indicate hardware issues or extremely poor link signal integrity - Data info: - --------- + **Data info**: port_xmit_data: (RO) Total number of data octets, divided by 4 (lanes), transmitted on all VLs. This is 64 bit counter @@ -176,8 +178,7 @@ Description: transmitted on all VLs from the port. This may include multicast packets with errors. - Misc info: - --------- + **Misc info**: port_xmit_discards: (RO) Total number of outbound packets discarded by the port because the port is down or congested. @@ -244,9 +245,11 @@ Description: two umad devices and two issm devices, while a switch will have one device of each type (for switch port 0). + ======= ===================================== ibdev: (RO) Show Infiniband (IB) device name port: (RO) Display port number + ======= ===================================== What: /sys/class/infiniband_mad/abi_version @@ -264,10 +267,12 @@ Date: Sept, 2005 KernelVersion: v2.6.14 Contact: linux-rdma@vger.kernel.org Description: + =============== =========================================== ibdev: (RO) Display Infiniband (IB) device name abi_version: (RO) Show ABI version of IB device specific interfaces. + =============== =========================================== What: /sys/class/infiniband_verbs/abi_version @@ -289,12 +294,14 @@ Date: Apr, 2005 KernelVersion: v2.6.12 Contact: linux-rdma@vger.kernel.org Description: + =============== ================================================ hw_rev: (RO) Hardware revision number hca_type: (RO) Host Channel Adapter type: MT23108, MT25208 (MT23108 compat mode), MT25208 or MT25204 board_id: (RO) Manufacturing board ID + =============== ================================================ sysfs interface for Mellanox ConnectX HCA IB driver (mlx4) @@ -307,11 +314,13 @@ Date: Sep, 2007 KernelVersion: v2.6.24 Contact: linux-rdma@vger.kernel.org Description: + =============== =============================== hw_rev: (RO) Hardware revision number hca_type: (RO) Host channel adapter type board_id: (RO) Manufacturing board ID + =============== =============================== What: /sys/class/infiniband/mlx4_X/iov/ports/<port-num>/gids/<n> @@ -337,6 +346,7 @@ Description: example, ports/1/pkeys/10 contains the value at index 10 in port 1's P_Key table. + ======================= ========================================== gids/<n>: (RO) The physical port gids n = 0..127 admin_guids/<n>: (RW) Allows examining or changing the @@ -365,6 +375,7 @@ Description: guest, whenever it uses its pkey index 1, will actually be using the real pkey index 10. + ======================= ========================================== What: /sys/class/infiniband/mlx4_X/iov/<pci-slot-num>/ports/<m>/smi_enabled @@ -376,12 +387,14 @@ Description: Enabling QP0 on VFs for selected VF/port. By default, no VFs are enabled for QP0 operation. - smi_enabled: (RO) Indicates whether smi is currently enabled - for the indicated VF/port + ================= ==== =========================================== + smi_enabled: (RO) Indicates whether smi is currently enabled + for the indicated VF/port - enable_smi_admin:(RW) Used by the admin to request that smi - capability be enabled or disabled for the - indicated VF/port. 0 = disable, 1 = enable. + enable_smi_admin: (RW) Used by the admin to request that smi + capability be enabled or disabled for the + indicated VF/port. 0 = disable, 1 = enable. + ================= ==== =========================================== The requested enablement will occur at the next reset of the VF (e.g. driver restart on the VM which owns the VF). @@ -398,6 +411,7 @@ KernelVersion: v2.6.35 Contact: linux-rdma@vger.kernel.org Description: + =============== ============================================= hw_rev: (RO) Hardware revision number hca_type: (RO) Driver short name. Should normally match @@ -406,6 +420,7 @@ Description: board_id: (RO) Manufacturing board id. (Vendor + device information) + =============== ============================================= sysfs interface for Intel IB driver qib @@ -426,6 +441,7 @@ Date: May, 2010 KernelVersion: v2.6.35 Contact: linux-rdma@vger.kernel.org Description: + =============== ====================================================== version: (RO) Display version information of installed software and drivers. @@ -452,6 +468,7 @@ Description: chip_reset: (WO) Reset the chip if possible by writing "reset" to this file. Only allowed if no user contexts are open that use chip resources. + =============== ====================================================== What: /sys/class/infiniband/qibX/ports/N/sl2vl/[0-15] @@ -471,14 +488,16 @@ Contact: linux-rdma@vger.kernel.org Description: Per-port congestion control. Both are binary attributes. - cc_table_bin: (RO) Congestion control table size followed by + =============== ================================================ + cc_table_bin (RO) Congestion control table size followed by table entries. - cc_settings_bin:(RO) Congestion settings: port control, control + cc_settings_bin (RO) Congestion settings: port control, control map and an array of 16 entries for the congestion entries - increase, timer, event log trigger threshold and the minimum injection rate delay. + =============== ================================================ What: /sys/class/infiniband/qibX/ports/N/linkstate/loopback What: /sys/class/infiniband/qibX/ports/N/linkstate/led_override @@ -491,6 +510,7 @@ Contact: linux-rdma@vger.kernel.org Description: [to be documented] + =============== =============================================== loopback: (WO) led_override: (WO) hrtbt_enable: (RW) @@ -501,6 +521,7 @@ Description: errors. Possible states are- "Initted", "Present", "IB_link_up", "IB_configured" or "Fatal_Hardware_Error". + =============== =============================================== What: /sys/class/infiniband/qibX/ports/N/diag_counters/rc_resends What: /sys/class/infiniband/qibX/ports/N/diag_counters/seq_naks @@ -549,6 +570,7 @@ Contact: Christian Benvenuti <benve@cisco.com>, linux-rdma@vger.kernel.org Description: + =============== =============================================== board_id: (RO) Manufacturing board id config: (RO) Report the configuration for this PF @@ -561,6 +583,7 @@ Description: iface: (RO) Shows which network interface this usNIC entry is associated to (visible with ifconfig). + =============== =============================================== What: /sys/class/infiniband/usnic_X/qpn/summary What: /sys/class/infiniband/usnic_X/qpn/context @@ -605,6 +628,7 @@ Date: May, 2016 KernelVersion: v4.6 Contact: linux-rdma@vger.kernel.org Description: + =============== ============================================= hw_rev: (RO) Hardware revision number board_id: (RO) Manufacturing board id @@ -623,6 +647,7 @@ Description: available. tempsense: (RO) Thermal sense information + =============== ============================================= What: /sys/class/infiniband/hfi1_X/ports/N/CCMgtA/cc_settings_bin @@ -634,19 +659,21 @@ Contact: linux-rdma@vger.kernel.org Description: Per-port congestion control. - cc_table_bin: (RO) CCA tables used by PSM2 Congestion control + =============== ================================================ + cc_table_bin (RO) CCA tables used by PSM2 Congestion control table size followed by table entries. Binary attribute. - cc_settings_bin:(RO) Congestion settings: port control, control + cc_settings_bin (RO) Congestion settings: port control, control map and an array of 16 entries for the congestion entries - increase, timer, event log trigger threshold and the minimum injection rate delay. Binary attribute. - cc_prescan: (RW) enable prescanning for faster BECN + cc_prescan (RW) enable prescanning for faster BECN response. Write "on" to enable and "off" to disable. + =============== ================================================ What: /sys/class/infiniband/hfi1_X/ports/N/sc2vl/[0-31] What: /sys/class/infiniband/hfi1_X/ports/N/sl2sc/[0-31] @@ -655,11 +682,13 @@ Date: May, 2016 KernelVersion: v4.6 Contact: linux-rdma@vger.kernel.org Description: + =============== =================================================== sc2vl/: (RO) 32 files (0 - 31) used to translate sl->vl sl2sc/: (RO) 32 files (0 - 31) used to translate sl->sc vl2mtu/: (RO) 16 files (0 - 15) used to determine MTU for vl + =============== =================================================== What: /sys/class/infiniband/hfi1_X/sdma_N/cpu_list @@ -670,26 +699,28 @@ Contact: linux-rdma@vger.kernel.org Description: sdma<N>/ contains one directory per sdma engine (0 - 15) + =============== ============================================== cpu_list: (RW) List of cpus for user-process to sdma engine assignment. vl: (RO) Displays the virtual lane (vl) the sdma engine maps to. + =============== ============================================== This interface gives the user control on the affinity settings for the device. As an example, to set an sdma engine irq affinity and thread affinity of a user processes to use the sdma engine, which is "near" in terms of NUMA configuration, or - physical cpu location, the user will do: + physical cpu location, the user will do:: - echo "3" > /proc/irq/<N>/smp_affinity_list - echo "4-7" > /sys/devices/.../sdma3/cpu_list - cat /sys/devices/.../sdma3/vl - 0 - echo "8" > /proc/irq/<M>/smp_affinity_list - echo "9-12" > /sys/devices/.../sdma4/cpu_list - cat /sys/devices/.../sdma4/vl - 1 + echo "3" > /proc/irq/<N>/smp_affinity_list + echo "4-7" > /sys/devices/.../sdma3/cpu_list + cat /sys/devices/.../sdma3/vl + 0 + echo "8" > /proc/irq/<M>/smp_affinity_list + echo "9-12" > /sys/devices/.../sdma4/cpu_list + cat /sys/devices/.../sdma4/vl + 1 to make sure that when a process runs on cpus 4,5,6, or 7, and uses vl=0, then sdma engine 3 is selected by the driver, and @@ -711,11 +742,13 @@ Date: Jan, 2016 KernelVersion: v4.10 Contact: linux-rdma@vger.kernel.org Description: + =============== ==== ======================== hw_rev: (RO) Hardware revision number hca_type: (RO) Show HCA type (I40IW) board_id: (RO) I40IW board ID + =============== ==== ======================== sysfs interface for QLogic qedr NIC Driver @@ -728,9 +761,11 @@ KernelVersion: v4.10 Contact: linux-rdma@vger.kernel.org Description: + =============== ==== ======================== hw_rev: (RO) Hardware revision number hca_type: (RO) Display HCA type + =============== ==== ======================== sysfs interface for VMware Paravirtual RDMA driver @@ -744,11 +779,13 @@ KernelVersion: v4.10 Contact: linux-rdma@vger.kernel.org Description: + =============== ==== ===================================== hw_rev: (RO) Hardware revision number hca_type: (RO) Host channel adapter type board_id: (RO) Display PVRDMA manufacturing board ID + =============== ==== ===================================== sysfs interface for Broadcom NetXtreme-E RoCE driver @@ -760,6 +797,8 @@ Date: Feb, 2017 KernelVersion: v4.11 Contact: linux-rdma@vger.kernel.org Description: + =============== ==== ========================= hw_rev: (RO) Hardware revision number hca_type: (RO) Host channel adapter type + =============== ==== ========================= diff --git a/Documentation/ABI/stable/sysfs-class-rfkill b/Documentation/ABI/stable/sysfs-class-rfkill index 5b154f922643..037979f7dc4b 100644 --- a/Documentation/ABI/stable/sysfs-class-rfkill +++ b/Documentation/ABI/stable/sysfs-class-rfkill @@ -2,7 +2,7 @@ rfkill - radio frequency (RF) connector kill switch support For details to this subsystem look at Documentation/driver-api/rfkill.rst. -For the deprecated /sys/class/rfkill/*/claim knobs of this interface look in +For the deprecated ``/sys/class/rfkill/*/claim`` knobs of this interface look in Documentation/ABI/removed/sysfs-class-rfkill. What: /sys/class/rfkill @@ -36,9 +36,10 @@ KernelVersion v2.6.22 Contact: linux-wireless@vger.kernel.org Description: Whether the soft blocked state is initialised from non-volatile storage at startup. -Values: A numeric value. - 0: false - 1: true +Values: A numeric value: + + - 0: false + - 1: true What: /sys/class/rfkill/rfkill[0-9]+/state @@ -54,6 +55,7 @@ Description: Current state of the transmitter. through this interface. There will likely be another attempt to remove it in the future. Values: A numeric value. + 0: RFKILL_STATE_SOFT_BLOCKED transmitter is turned off by software 1: RFKILL_STATE_UNBLOCKED @@ -69,6 +71,7 @@ KernelVersion v2.6.34 Contact: linux-wireless@vger.kernel.org Description: Current hardblock state. This file is read only. Values: A numeric value. + 0: inactive The transmitter is (potentially) active. 1: active @@ -82,7 +85,9 @@ KernelVersion v2.6.34 Contact: linux-wireless@vger.kernel.org Description: Current softblock state. This file is read and write. Values: A numeric value. + 0: inactive The transmitter is (potentially) active. + 1: active The transmitter is turned off by software. diff --git a/Documentation/ABI/stable/sysfs-class-tpm b/Documentation/ABI/stable/sysfs-class-tpm index 58e94e7d55be..91ca63ec7581 100644 --- a/Documentation/ABI/stable/sysfs-class-tpm +++ b/Documentation/ABI/stable/sysfs-class-tpm @@ -32,11 +32,11 @@ KernelVersion: 2.6.12 Contact: linux-integrity@vger.kernel.org Description: The "caps" property contains TPM manufacturer and version info. - Example output: + Example output:: - Manufacturer: 0x53544d20 - TCG version: 1.2 - Firmware version: 8.16 + Manufacturer: 0x53544d20 + TCG version: 1.2 + Firmware version: 8.16 Manufacturer is a hex dump of the 4 byte manufacturer info space in a TPM. TCG version shows the TCG TPM spec level that @@ -54,9 +54,9 @@ Description: The "durations" property shows the 3 vendor-specific values any longer than necessary before starting to poll for a result. - Example output: + Example output:: - 3015000 4508000 180995000 [original] + 3015000 4508000 180995000 [original] Here the short, medium and long durations are displayed in usecs. "[original]" indicates that the values are displayed @@ -92,14 +92,14 @@ Description: The "pcrs" property will dump the current value of all Platform values may be constantly changing, the output is only valid for a snapshot in time. - Example output: + Example output:: - PCR-00: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75 - PCR-01: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75 - PCR-02: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75 - PCR-03: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75 - PCR-04: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75 - ... + PCR-00: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75 + PCR-01: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75 + PCR-02: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75 + PCR-03: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75 + PCR-04: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75 + ... The number of PCRs and hex bytes needed to represent a PCR value will vary depending on TPM chip version. For TPM 1.1 and @@ -119,44 +119,44 @@ Description: The "pubek" property will return the TPM's public endorsement ated at TPM manufacture time and exists for the life of the chip. - Example output: - - Algorithm: 00 00 00 01 - Encscheme: 00 03 - Sigscheme: 00 01 - Parameters: 00 00 08 00 00 00 00 02 00 00 00 00 - Modulus length: 256 - Modulus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ossible values: - - Algorithm: TPM_ALG_RSA (1) - Encscheme: TPM_ES_RSAESPKCSv15 (2) + Example output:: + + Algorithm: 00 00 00 01 + Encscheme: 00 03 + Sigscheme: 00 01 + Parameters: 00 00 08 00 00 00 00 02 00 00 00 00 + Modulus length: 256 + Modulus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ossible values:: + + Algorithm: TPM_ALG_RSA (1) + Encscheme: TPM_ES_RSAESPKCSv15 (2) TPM_ES_RSAESOAEP_SHA1_MGF1 (3) - Sigscheme: TPM_SS_NONE (1) - Parameters, a byte string of 3 u32 values: + Sigscheme: TPM_SS_NONE (1) + Parameters, a byte string of 3 u32 values: Key Length (bits): 00 00 08 00 (2048) Num primes: 00 00 00 02 (2) Exponent Size: 00 00 00 00 (0 means the default exp) - Modulus Length: 256 (bytes) - Modulus: The 256 byte Endorsement Key modulus + Modulus Length: 256 (bytes) + Modulus: The 256 byte Endorsement Key modulus What: /sys/class/tpm/tpmX/device/temp_deactivated Date: April 2006 @@ -176,9 +176,9 @@ Description: The "timeouts" property shows the 4 vendor-specific values timeouts is defined by the TPM interface spec that the chip conforms to. - Example output: + Example output:: - 750000 750000 750000 750000 [original] + 750000 750000 750000 750000 [original] The four timeout values are shown in usecs, with a trailing "[original]" or "[adjusted]" depending on whether the values @@ -191,6 +191,6 @@ Contact: linux-integrity@vger.kernel.org Description: The "tpm_version_major" property shows the TCG spec major version implemented by the TPM device. - Example output: + Example output:: - 2 + 2 diff --git a/Documentation/ABI/stable/sysfs-devices b/Documentation/ABI/stable/sysfs-devices index 4404bd9b96c1..42bf1eab5677 100644 --- a/Documentation/ABI/stable/sysfs-devices +++ b/Documentation/ABI/stable/sysfs-devices @@ -1,5 +1,6 @@ -# Note: This documents additional properties of any device beyond what -# is documented in Documentation/admin-guide/sysfs-rules.rst +Note: + This documents additional properties of any device beyond what + is documented in Documentation/admin-guide/sysfs-rules.rst What: /sys/devices/*/of_node Date: February 2015 diff --git a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp index 00fa04c76ff3..f5724bb5b462 100644 --- a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp +++ b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp @@ -12,13 +12,15 @@ Description: resets. Three registers are used by the FSBL and other Xilinx software products: GLOBAL_GEN_STORAGE{4:6}. - Usage: - # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 - # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 + Usage:: + + # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 + # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 + + Example:: - Example: - # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 - # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 + # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 + # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 Users: Xilinx @@ -39,13 +41,15 @@ Description: software products: PERS_GLOB_GEN_STORAGE{4:7}. Register is reset only by a POR reset. - Usage: - # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 - # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 + Usage:: + + # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 + # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 + + Example:: - Example: - # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 - # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 + # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 + # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 Users: Xilinx @@ -61,23 +65,28 @@ Description: Following are available shutdown scopes(subtypes): - subsystem: Only the APU along with all of its peripherals + subsystem: + Only the APU along with all of its peripherals not used by other processing units will be shut down. This may result in the FPD power domain being shut down provided that no other processing unit uses FPD peripherals or DRAM. - ps_only: The complete PS will be shut down, including the + ps_only: + The complete PS will be shut down, including the RPU, PMU, etc. Only the PL domain (FPGA) remains untouched. - system: The complete system/device is shut down. + system: + The complete system/device is shut down. - Usage: - # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope - # echo <scope> > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope + Usage:: + + # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope + # echo <scope> > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope + + Example:: - Example: - # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope - # echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope + # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope + # echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope Users: Xilinx @@ -94,10 +103,13 @@ Description: system restart. Usage: - Set healthy bit - # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status - Unset healthy bit - # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status + Set healthy bit:: + + # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status + + Unset healthy bit:: + + # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status Users: Xilinx diff --git a/Documentation/ABI/stable/sysfs-driver-ib_srp b/Documentation/ABI/stable/sysfs-driver-ib_srp index 84972a57caae..bada15a329f7 100644 --- a/Documentation/ABI/stable/sysfs-driver-ib_srp +++ b/Documentation/ABI/stable/sysfs-driver-ib_srp @@ -6,6 +6,7 @@ Description: Interface for making ib_srp connect to a new target. One can request ib_srp to connect to a new target by writing a comma-separated list of login parameters to this sysfs attribute. The supported parameters are: + * id_ext, a 16-digit hexadecimal number specifying the eight byte identifier extension in the 16-byte SRP target port identifier. The target port identifier is sent by ib_srp diff --git a/Documentation/ABI/stable/sysfs-driver-speakup b/Documentation/ABI/stable/sysfs-driver-speakup index c6a32c434ce9..792f58ba327d 100644 --- a/Documentation/ABI/stable/sysfs-driver-speakup +++ b/Documentation/ABI/stable/sysfs-driver-speakup @@ -69,6 +69,7 @@ Description: Controls if typing interrupts output from speakup. With speakup if for example the say screen command is used before the entire screen is read. + With no_interrupt set to one, if the say screen command is used, and one then types on the keyboard, speakup will continue to say the whole screen regardless until @@ -215,8 +216,10 @@ Description: This file contains names for key states. Again, these are part of the help system. For instance, if you had pressed speakup + keypad 3, you would hear: "speakup keypad 3 is go to bottom edge." + The speakup key is depressed, so the name of the key state is speakup. + This part of the message comes from the states collection. What: /sys/accessibility/speakup/i18n/characters @@ -297,6 +300,7 @@ KernelVersion: 2.6 Contact: speakup@linux-speakup.org Description: Controls if punctuation is spoken by speakup, or by the synthesizer. + For example, speakup speaks ">" as "greater", while the espeak synthesizer used by the soft driver speaks "greater than". Zero lets speakup speak the punctuation. One lets the diff --git a/Documentation/ABI/stable/sysfs-firmware-efi-vars b/Documentation/ABI/stable/sysfs-firmware-efi-vars index 5def20b9019e..46ccd233e359 100644 --- a/Documentation/ABI/stable/sysfs-firmware-efi-vars +++ b/Documentation/ABI/stable/sysfs-firmware-efi-vars @@ -17,6 +17,7 @@ Description: directory has a name of the form "<key>-<vendor guid>" and contains the following files: + =============== ======================================== attributes: A read-only text file enumerating the EFI variable flags. Potential values include: @@ -59,12 +60,14 @@ Description: size: As ASCII representation of the size of the variable's value. + =============== ======================================== In addition, two other magic binary files are provided in the top-level directory and are used for adding and removing variables: + =============== ======================================== new_var: Takes a "struct efi_variable" and instructs the EFI firmware to create a new variable. @@ -73,3 +76,4 @@ Description: instructs the EFI firmware to remove any variable that has a matching vendor GUID and variable key name. + =============== ======================================== diff --git a/Documentation/ABI/stable/sysfs-firmware-opal-dump b/Documentation/ABI/stable/sysfs-firmware-opal-dump index 32fe7f5c4880..1f74f45327ba 100644 --- a/Documentation/ABI/stable/sysfs-firmware-opal-dump +++ b/Documentation/ABI/stable/sysfs-firmware-opal-dump @@ -7,6 +7,7 @@ Description: This is only for the powerpc/powernv platform. + =============== =============================================== initiate_dump: When '1' is written to it, we will initiate a dump. Read this file for supported commands. @@ -19,8 +20,11 @@ Description: and ID of the dump, use the id and type files. Do not rely on any particular size of dump type or dump id. + =============== =============================================== Each dump has the following files: + + =============== =============================================== id: An ASCII representation of the dump ID in hex (e.g. '0x01') type: An ASCII representation of the type of @@ -39,3 +43,4 @@ Description: inaccessible. Reading this file will get a list of supported actions. + =============== =============================================== diff --git a/Documentation/ABI/stable/sysfs-firmware-opal-elog b/Documentation/ABI/stable/sysfs-firmware-opal-elog index 2536434d49d0..7c8a61a2d005 100644 --- a/Documentation/ABI/stable/sysfs-firmware-opal-elog +++ b/Documentation/ABI/stable/sysfs-firmware-opal-elog @@ -38,6 +38,7 @@ Description: For each log entry (directory), there are the following files: + ============== ================================================ id: An ASCII representation of the ID of the error log, in hex - e.g. "0x01". @@ -58,3 +59,4 @@ Description: entry will be removed from sysfs. Reading this file will list the supported operations (currently just acknowledge). + ============== ================================================ diff --git a/Documentation/ABI/stable/sysfs-hypervisor-xen b/Documentation/ABI/stable/sysfs-hypervisor-xen index 3cf5cdfcd9a8..748593c64568 100644 --- a/Documentation/ABI/stable/sysfs-hypervisor-xen +++ b/Documentation/ABI/stable/sysfs-hypervisor-xen @@ -33,6 +33,8 @@ Description: If running under Xen: Space separated list of supported guest system types. Each type is in the format: <class>-<major>.<minor>-<arch> With: + + ======== ============================================ <class>: "xen" -- x86: paravirtualized, arm: standard "hvm" -- x86 only: fully virtualized <major>: major guest interface version @@ -43,6 +45,7 @@ Description: If running under Xen: "x86_64": 64 bit x86 guest "armv7l": 32 bit arm guest "aarch64": 64 bit arm guest + ======== ============================================ What: /sys/hypervisor/properties/changeset Date: March 2009 diff --git a/Documentation/ABI/stable/vdso b/Documentation/ABI/stable/vdso index 55406ec8a35a..951838d42781 100644 --- a/Documentation/ABI/stable/vdso +++ b/Documentation/ABI/stable/vdso @@ -1,3 +1,9 @@ +What: vDSO +Date: July 2011 +KernelVersion: 3.0 +Contact: Andy Lutomirski <luto@kernel.org> +Description: + On some architectures, when the kernel loads any userspace program it maps an ELF DSO into that program's address space. This DSO is called the vDSO and it often contains useful and highly-optimized alternatives @@ -23,6 +29,7 @@ Unless otherwise noted, the set of symbols with any given version and the ABI of those symbols is considered stable. It may vary across architectures, though. -(As of this writing, this ABI documentation as been confirmed for x86_64. +Note: + As of this writing, this ABI documentation as been confirmed for x86_64. The maintainers of the other vDSO-using architectures should confirm - that it is correct for their architecture.) + that it is correct for their architecture. diff --git a/Documentation/ABI/testing/configfs-acpi b/Documentation/ABI/testing/configfs-acpi index 4ab4e99aa863..c09b640c3cb1 100644 --- a/Documentation/ABI/testing/configfs-acpi +++ b/Documentation/ABI/testing/configfs-acpi @@ -14,7 +14,8 @@ Description: This group contains the configuration for user defined ACPI tables. The attributes of a user define table are: - aml - a binary attribute that the user can use to + aml + - a binary attribute that the user can use to fill in the ACPI aml definitions. Once the aml data is written to this file and the file is closed the table will be loaded and ACPI devices @@ -26,11 +27,26 @@ Description: The rest of the attributes are read-only and are valid only after the table has been loaded by filling the aml entry: - signature - ASCII table signature - length - length of table in bytes, including the header - revision - ACPI Specification minor version number - oem_id - ASCII OEM identification - oem_table_id - ASCII OEM table identification - oem_revision - OEM revision number - asl_compiler_id - ASCII ASL compiler vendor ID - asl_compiler_revision - ASL compiler version + signature + - ASCII table signature + + length + - length of table in bytes, including the header + + revision + - ACPI Specification minor version number + + oem_id + - ASCII OEM identification + + oem_table_id + - ASCII OEM table identification + + oem_revision + - OEM revision number + + asl_compiler_id + - ASCII ASL compiler vendor ID + + asl_compiler_revision + - ASL compiler version diff --git a/Documentation/ABI/testing/configfs-most b/Documentation/ABI/testing/configfs-most index ed67a4d9f6d6..bc6b8bd18da4 100644 --- a/Documentation/ABI/testing/configfs-most +++ b/Documentation/ABI/testing/configfs-most @@ -15,22 +15,28 @@ KernelVersion: 5.2 Description: The attributes: - buffer_size configure the buffer size for this channel + buffer_size + configure the buffer size for this channel - subbuffer_size configure the sub-buffer size for this channel + subbuffer_size + configure the sub-buffer size for this channel (needed for synchronous and isochrnous data) - num_buffers configure number of buffers used for this + num_buffers + configure number of buffers used for this channel - datatype configure type of data that will travel over + datatype + configure type of data that will travel over this channel - direction configure whether this link will be an input + direction + configure whether this link will be an input or output - dbr_size configure DBR data buffer size (this is used + dbr_size + configure DBR data buffer size (this is used for MediaLB communication only) packets_per_xact @@ -39,18 +45,23 @@ Description: transmitted via USB (this is used for USB communication only) - device name of the device the link is to be attached to + device + name of the device the link is to be attached to - channel name of the channel the link is to be attached to + channel + name of the channel the link is to be attached to - comp_params pass parameters needed by some components + comp_params + pass parameters needed by some components - create_link write '1' to this attribute to trigger the + create_link + write '1' to this attribute to trigger the creation of the link. In case of speculative configuration, the creation is post-poned until a physical device is being attached to the bus. - destroy_link write '1' to this attribute to destroy an + destroy_link + write '1' to this attribute to destroy an active link What: /sys/kernel/config/most_video/<link> @@ -59,22 +70,28 @@ KernelVersion: 5.2 Description: The attributes: - buffer_size configure the buffer size for this channel + buffer_size + configure the buffer size for this channel - subbuffer_size configure the sub-buffer size for this channel + subbuffer_size + configure the sub-buffer size for this channel (needed for synchronous and isochrnous data) - num_buffers configure number of buffers used for this + num_buffers + configure number of buffers used for this channel - datatype configure type of data that will travel over + datatype + configure type of data that will travel over this channel - direction configure whether this link will be an input + direction + configure whether this link will be an input or output - dbr_size configure DBR data buffer size (this is used + dbr_size + configure DBR data buffer size (this is used for MediaLB communication only) packets_per_xact @@ -83,18 +100,23 @@ Description: transmitted via USB (this is used for USB communication only) - device name of the device the link is to be attached to + device + name of the device the link is to be attached to - channel name of the channel the link is to be attached to + channel + name of the channel the link is to be attached to - comp_params pass parameters needed by some components + comp_params + pass parameters needed by some components - create_link write '1' to this attribute to trigger the + create_link + write '1' to this attribute to trigger the creation of the link. In case of speculative configuration, the creation is post-poned until a physical device is being attached to the bus. - destroy_link write '1' to this attribute to destroy an + destroy_link + write '1' to this attribute to destroy an active link What: /sys/kernel/config/most_net/<link> @@ -103,22 +125,28 @@ KernelVersion: 5.2 Description: The attributes: - buffer_size configure the buffer size for this channel + buffer_size + configure the buffer size for this channel - subbuffer_size configure the sub-buffer size for this channel + subbuffer_size + configure the sub-buffer size for this channel (needed for synchronous and isochrnous data) - num_buffers configure number of buffers used for this + num_buffers + configure number of buffers used for this channel - datatype configure type of data that will travel over + datatype + configure type of data that will travel over this channel - direction configure whether this link will be an input + direction + configure whether this link will be an input or output - dbr_size configure DBR data buffer size (this is used + dbr_size + configure DBR data buffer size (this is used for MediaLB communication only) packets_per_xact @@ -127,18 +155,23 @@ Description: transmitted via USB (this is used for USB communication only) - device name of the device the link is to be attached to + device + name of the device the link is to be attached to - channel name of the channel the link is to be attached to + channel + name of the channel the link is to be attached to - comp_params pass parameters needed by some components + comp_params + pass parameters needed by some components - create_link write '1' to this attribute to trigger the + create_link + write '1' to this attribute to trigger the creation of the link. In case of speculative configuration, the creation is post-poned until a physical device is being attached to the bus. - destroy_link write '1' to this attribute to destroy an + destroy_link + write '1' to this attribute to destroy an active link What: /sys/kernel/config/most_sound/<card> @@ -147,7 +180,8 @@ KernelVersion: 5.2 Description: The attributes: - create_card write '1' to this attribute to trigger the + create_card + write '1' to this attribute to trigger the registration of the sound card with the ALSA subsystem. @@ -157,22 +191,28 @@ KernelVersion: 5.2 Description: The attributes: - buffer_size configure the buffer size for this channel + buffer_size + configure the buffer size for this channel - subbuffer_size configure the sub-buffer size for this channel + subbuffer_size + configure the sub-buffer size for this channel (needed for synchronous and isochrnous data) - num_buffers configure number of buffers used for this + num_buffers + configure number of buffers used for this channel - datatype configure type of data that will travel over + datatype + configure type of data that will travel over this channel - direction configure whether this link will be an input + direction + configure whether this link will be an input or output - dbr_size configure DBR data buffer size (this is used + dbr_size + configure DBR data buffer size (this is used for MediaLB communication only) packets_per_xact @@ -181,16 +221,21 @@ Description: transmitted via USB (this is used for USB communication only) - device name of the device the link is to be attached to + device + name of the device the link is to be attached to - channel name of the channel the link is to be attached to + channel + name of the channel the link is to be attached to - comp_params pass parameters needed by some components + comp_params + pass parameters needed by some components - create_link write '1' to this attribute to trigger the + create_link + write '1' to this attribute to trigger the creation of the link. In case of speculative configuration, the creation is post-poned until a physical device is being attached to the bus. - destroy_link write '1' to this attribute to destroy an + destroy_link + write '1' to this attribute to destroy an active link diff --git a/Documentation/ABI/testing/configfs-spear-pcie-gadget b/Documentation/ABI/testing/configfs-spear-pcie-gadget index 840c324ef34d..cf877bd341df 100644 --- a/Documentation/ABI/testing/configfs-spear-pcie-gadget +++ b/Documentation/ABI/testing/configfs-spear-pcie-gadget @@ -10,22 +10,24 @@ Description: This interfaces can be used to show spear's PCIe device capability. Nodes are only visible when configfs is mounted. To mount configfs - in /config directory use: - # mount -t configfs none /config/ + in /config directory use:: - For nth PCIe Device Controller - /config/pcie-gadget.n/ - link ... used to enable ltssm and read its status. - int_type ...used to configure and read type of supported - interrupt - no_of_msi ... used to configure number of MSI vector needed and + # mount -t configfs none /config/ + + For nth PCIe Device Controller /config/pcie-gadget.n/: + + =============== ====================================================== + link used to enable ltssm and read its status. + int_type used to configure and read type of supported interrupt + no_of_msi used to configure number of MSI vector needed and to read no of MSI granted. - inta ... write 1 to assert INTA and 0 to de-assert. - send_msi ... write MSI vector to be sent. - vendor_id ... used to write and read vendor id (hex) - device_id ... used to write and read device id (hex) - bar0_size ... used to write and read bar0_size - bar0_address ... used to write and read bar0 mapped area in hex. - bar0_rw_offset ... used to write and read offset of bar0 where - bar0_data will be written or read. - bar0_data ... used to write and read data at bar0_rw_offset. + inta write 1 to assert INTA and 0 to de-assert. + send_msi write MSI vector to be sent. + vendor_id used to write and read vendor id (hex) + device_id used to write and read device id (hex) + bar0_size used to write and read bar0_size + bar0_address used to write and read bar0 mapped area in hex. + bar0_rw_offset used to write and read offset of bar0 where bar0_data + will be written or read. + bar0_data used to write and read data at bar0_rw_offset. + =============== ====================================================== diff --git a/Documentation/ABI/testing/configfs-usb-gadget b/Documentation/ABI/testing/configfs-usb-gadget index 4594cc2435e8..dc351e9af80a 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget +++ b/Documentation/ABI/testing/configfs-usb-gadget @@ -12,22 +12,24 @@ Description: The attributes of a gadget: - UDC - bind a gadget to UDC/unbind a gadget; - write UDC's name found in /sys/class/udc/* - to bind a gadget, empty string "" to unbind. - - max_speed - maximum speed the driver supports. Valid - names are super-speed-plus, super-speed, - high-speed, full-speed, and low-speed. - - bDeviceClass - USB device class code - bDeviceSubClass - USB device subclass code - bDeviceProtocol - USB device protocol code - bMaxPacketSize0 - maximum endpoint 0 packet size - bcdDevice - bcd device release number - bcdUSB - bcd USB specification version number - idProduct - product ID - idVendor - vendor ID + ================ ============================================ + UDC bind a gadget to UDC/unbind a gadget; + write UDC's name found in /sys/class/udc/* + to bind a gadget, empty string "" to unbind. + + max_speed maximum speed the driver supports. Valid + names are super-speed-plus, super-speed, + high-speed, full-speed, and low-speed. + + bDeviceClass USB device class code + bDeviceSubClass USB device subclass code + bDeviceProtocol USB device protocol code + bMaxPacketSize0 maximum endpoint 0 packet size + bcdDevice bcd device release number + bcdUSB bcd USB specification version number + idProduct product ID + idVendor vendor ID + ================ ============================================ What: /config/usb-gadget/gadget/configs Date: Jun 2013 @@ -41,8 +43,10 @@ KernelVersion: 3.11 Description: The attributes of a configuration: - bmAttributes - configuration characteristics - MaxPower - maximum power consumption from the bus + ================ ====================================== + bmAttributes configuration characteristics + MaxPower maximum power consumption from the bus + ================ ====================================== What: /config/usb-gadget/gadget/configs/config/strings Date: Jun 2013 @@ -57,7 +61,9 @@ KernelVersion: 3.11 Description: The attributes: - configuration - configuration description + ================ ========================= + configuration configuration description + ================ ========================= What: /config/usb-gadget/gadget/functions @@ -76,8 +82,10 @@ Description: The attributes: - compatible_id - 8-byte string for "Compatible ID" - sub_compatible_id - 8-byte string for "Sub Compatible ID" + ================= ===================================== + compatible_id 8-byte string for "Compatible ID" + sub_compatible_id 8-byte string for "Sub Compatible ID" + ================= ===================================== What: /config/usb-gadget/gadget/functions/<func>.<inst>/interface.<n>/<property> Date: May 2014 @@ -89,16 +97,19 @@ Description: The attributes: - type - value 1..7 for interpreting the data - 1: unicode string - 2: unicode string with environment variable - 3: binary - 4: little-endian 32-bit - 5: big-endian 32-bit - 6: unicode string with a symbolic link - 7: multiple unicode strings - data - blob of data to be interpreted depending on + ===== =============================================== + type value 1..7 for interpreting the data + + - 1: unicode string + - 2: unicode string with environment variable + - 3: binary + - 4: little-endian 32-bit + - 5: big-endian 32-bit + - 6: unicode string with a symbolic link + - 7: multiple unicode strings + data blob of data to be interpreted depending on type + ===== =============================================== What: /config/usb-gadget/gadget/strings Date: Jun 2013 @@ -113,9 +124,11 @@ KernelVersion: 3.11 Description: The attributes: - serialnumber - gadget's serial number (string) - product - gadget's product description - manufacturer - gadget's manufacturer description + ============ ================================= + serialnumber gadget's serial number (string) + product gadget's product description + manufacturer gadget's manufacturer description + ============ ================================= What: /config/usb-gadget/gadget/os_desc Date: May 2014 @@ -123,8 +136,10 @@ KernelVersion: 3.16 Description: This group contains "OS String" extension handling attributes. - use - flag turning "OS Desctiptors" support on/off - b_vendor_code - one-byte value used for custom per-device and + ============= =============================================== + use flag turning "OS Desctiptors" support on/off + b_vendor_code one-byte value used for custom per-device and per-interface requests - qw_sign - an identifier to be reported as "OS String" + qw_sign an identifier to be reported as "OS String" proper + ============= =============================================== diff --git a/Documentation/ABI/testing/configfs-usb-gadget-ecm b/Documentation/ABI/testing/configfs-usb-gadget-ecm index 0addf7704b4c..272bc1e4ce2e 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-ecm +++ b/Documentation/ABI/testing/configfs-usb-gadget-ecm @@ -4,13 +4,17 @@ KernelVersion: 3.11 Description: The attributes: - ifname - network device interface name associated with + ifname + - network device interface name associated with this function instance - qmult - queue length multiplier for high and + qmult + - queue length multiplier for high and super speed - host_addr - MAC address of host's end of this + host_addr + - MAC address of host's end of this Ethernet over USB link - dev_addr - MAC address of device's end of this + dev_addr + - MAC address of device's end of this Ethernet over USB link diff --git a/Documentation/ABI/testing/configfs-usb-gadget-eem b/Documentation/ABI/testing/configfs-usb-gadget-eem index a4c57158fcde..178c3d5fb647 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-eem +++ b/Documentation/ABI/testing/configfs-usb-gadget-eem @@ -4,11 +4,13 @@ KernelVersion: 3.11 Description: The attributes: - ifname - network device interface name associated with + ========== ============================================= + ifname network device interface name associated with this function instance - qmult - queue length multiplier for high and + qmult queue length multiplier for high and super speed - host_addr - MAC address of host's end of this + host_addr MAC address of host's end of this Ethernet over USB link - dev_addr - MAC address of device's end of this + dev_addr MAC address of device's end of this Ethernet over USB link + ========== ============================================= diff --git a/Documentation/ABI/testing/configfs-usb-gadget-hid b/Documentation/ABI/testing/configfs-usb-gadget-hid index f12e00e6baa3..748705c4cb58 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-hid +++ b/Documentation/ABI/testing/configfs-usb-gadget-hid @@ -4,8 +4,10 @@ KernelVersion: 3.19 Description: The attributes: - protocol - HID protocol to use - report_desc - blob corresponding to HID report descriptors + ============= ============================================ + protocol HID protocol to use + report_desc blob corresponding to HID report descriptors except the data passed through /dev/hidg<N> - report_length - HID report length - subclass - HID device subclass to use + report_length HID report length + subclass HID device subclass to use + ============= ============================================ diff --git a/Documentation/ABI/testing/configfs-usb-gadget-loopback b/Documentation/ABI/testing/configfs-usb-gadget-loopback index 06beefbcf061..e6c6ba5ac7ff 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-loopback +++ b/Documentation/ABI/testing/configfs-usb-gadget-loopback @@ -4,5 +4,7 @@ KernelVersion: 3.13 Description: The attributes: - qlen - depth of loopback queue - buflen - buffer length + ======= ======================= + qlen depth of loopback queue + buflen buffer length + ======= ======================= diff --git a/Documentation/ABI/testing/configfs-usb-gadget-mass-storage b/Documentation/ABI/testing/configfs-usb-gadget-mass-storage index 9931fb0d63ba..c86b63a7bb43 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-mass-storage +++ b/Documentation/ABI/testing/configfs-usb-gadget-mass-storage @@ -4,12 +4,14 @@ KernelVersion: 3.13 Description: The attributes: - stall - Set to permit function to halt bulk endpoints. + =========== ============================================== + stall Set to permit function to halt bulk endpoints. Disabled on some USB devices known not to work correctly. You should set it to true. - num_buffers - Number of pipeline buffers. Valid numbers + num_buffers Number of pipeline buffers. Valid numbers are 2..4. Available only if CONFIG_USB_GADGET_DEBUG_FILES is set. + =========== ============================================== What: /config/usb-gadget/gadget/functions/mass_storage.name/lun.name Date: Oct 2013 @@ -17,15 +19,17 @@ KernelVersion: 3.13 Description: The attributes: - file - The path to the backing file for the LUN. + =========== ============================================== + file The path to the backing file for the LUN. Required if LUN is not marked as removable. - ro - Flag specifying access to the LUN shall be + ro Flag specifying access to the LUN shall be read-only. This is implied if CD-ROM emulation is enabled as well as when it was impossible to open "filename" in R/W mode. - removable - Flag specifying that LUN shall be indicated as + removable Flag specifying that LUN shall be indicated as being removable. - cdrom - Flag specifying that LUN shall be reported as + cdrom Flag specifying that LUN shall be reported as being a CD-ROM. - nofua - Flag specifying that FUA flag + nofua Flag specifying that FUA flag in SCSI WRITE(10,12) + =========== ============================================== diff --git a/Documentation/ABI/testing/configfs-usb-gadget-midi b/Documentation/ABI/testing/configfs-usb-gadget-midi index 6b341df7249c..07389cddd51a 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-midi +++ b/Documentation/ABI/testing/configfs-usb-gadget-midi @@ -4,9 +4,11 @@ KernelVersion: 3.19 Description: The attributes: - index - index value for the USB MIDI adapter - id - ID string for the USB MIDI adapter - buflen - MIDI buffer length - qlen - USB read request queue length - in_ports - number of MIDI input ports - out_ports - number of MIDI output ports + ========== ==================================== + index index value for the USB MIDI adapter + id ID string for the USB MIDI adapter + buflen MIDI buffer length + qlen USB read request queue length + in_ports number of MIDI input ports + out_ports number of MIDI output ports + ========== ==================================== diff --git a/Documentation/ABI/testing/configfs-usb-gadget-printer b/Documentation/ABI/testing/configfs-usb-gadget-printer index 6b0714e3c605..7aa731bac2da 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-printer +++ b/Documentation/ABI/testing/configfs-usb-gadget-printer @@ -4,6 +4,8 @@ KernelVersion: 4.1 Description: The attributes: - pnp_string - Data to be passed to the host in pnp string - q_len - Number of requests per endpoint + ========== =========================================== + pnp_string Data to be passed to the host in pnp string + q_len Number of requests per endpoint + ========== =========================================== diff --git a/Documentation/ABI/testing/configfs-usb-gadget-rndis b/Documentation/ABI/testing/configfs-usb-gadget-rndis index 137399095d74..9416eda7fe93 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-rndis +++ b/Documentation/ABI/testing/configfs-usb-gadget-rndis @@ -4,14 +4,16 @@ KernelVersion: 3.11 Description: The attributes: - ifname - network device interface name associated with + ========= ============================================= + ifname network device interface name associated with this function instance - qmult - queue length multiplier for high and + qmult queue length multiplier for high and super speed - host_addr - MAC address of host's end of this + host_addr MAC address of host's end of this Ethernet over USB link - dev_addr - MAC address of device's end of this + dev_addr MAC address of device's end of this Ethernet over USB link - class - USB interface class, default is 02 (hex) - subclass - USB interface subclass, default is 06 (hex) - protocol - USB interface protocol, default is 00 (hex) + class USB interface class, default is 02 (hex) + subclass USB interface subclass, default is 06 (hex) + protocol USB interface protocol, default is 00 (hex) + ========= ============================================= diff --git a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink index f56335af2d88..1f3d31b607b7 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink +++ b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink @@ -4,11 +4,13 @@ KernelVersion: 3.13 Description: The attributes: - pattern - 0 (all zeros), 1 (mod63), 2 (none) - isoc_interval - 1..16 - isoc_maxpacket - 0 - 1023 (fs), 0 - 1024 (hs/ss) - isoc_mult - 0..2 (hs/ss only) - isoc_maxburst - 0..15 (ss only) - buflen - buffer length - bulk_qlen - depth of queue for bulk - iso_qlen - depth of queue for iso + ============== ================================== + pattern 0 (all zeros), 1 (mod63), 2 (none) + isoc_interval 1..16 + isoc_maxpacket 0 - 1023 (fs), 0 - 1024 (hs/ss) + isoc_mult 0..2 (hs/ss only) + isoc_maxburst 0..15 (ss only) + buflen buffer length + bulk_qlen depth of queue for bulk + iso_qlen depth of queue for iso + ============== ================================== diff --git a/Documentation/ABI/testing/configfs-usb-gadget-subset b/Documentation/ABI/testing/configfs-usb-gadget-subset index 9373e2c51ea4..0061b864351f 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-subset +++ b/Documentation/ABI/testing/configfs-usb-gadget-subset @@ -4,11 +4,13 @@ KernelVersion: 3.11 Description: The attributes: - ifname - network device interface name associated with + ========== ============================================= + ifname network device interface name associated with this function instance - qmult - queue length multiplier for high and + qmult queue length multiplier for high and super speed - host_addr - MAC address of host's end of this + host_addr MAC address of host's end of this Ethernet over USB link - dev_addr - MAC address of device's end of this + dev_addr MAC address of device's end of this Ethernet over USB link + ========== ============================================= diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uac1 b/Documentation/ABI/testing/configfs-usb-gadget-uac1 index abfe447c848f..dc23fd776943 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-uac1 +++ b/Documentation/ABI/testing/configfs-usb-gadget-uac1 @@ -4,11 +4,13 @@ KernelVersion: 4.14 Description: The attributes: - c_chmask - capture channel mask - c_srate - capture sampling rate - c_ssize - capture sample size (bytes) - p_chmask - playback channel mask - p_srate - playback sampling rate - p_ssize - playback sample size (bytes) - req_number - the number of pre-allocated request - for both capture and playback + ========== =================================== + c_chmask capture channel mask + c_srate capture sampling rate + c_ssize capture sample size (bytes) + p_chmask playback channel mask + p_srate playback sampling rate + p_ssize playback sample size (bytes) + req_number the number of pre-allocated request + for both capture and playback + ========== =================================== diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uac2 b/Documentation/ABI/testing/configfs-usb-gadget-uac2 index 2bfdd4efa9bd..d4356c8b8cd6 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-uac2 +++ b/Documentation/ABI/testing/configfs-usb-gadget-uac2 @@ -4,9 +4,11 @@ KernelVersion: 3.18 Description: The attributes: - c_chmask - capture channel mask - c_srate - capture sampling rate - c_ssize - capture sample size (bytes) - p_chmask - playback channel mask - p_srate - playback sampling rate - p_ssize - playback sample size (bytes) + ========= ============================ + c_chmask capture channel mask + c_srate capture sampling rate + c_ssize capture sample size (bytes) + p_chmask playback channel mask + p_srate playback sampling rate + p_ssize playback sample size (bytes) + ========= ============================ diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uvc b/Documentation/ABI/testing/configfs-usb-gadget-uvc index 809765bd9573..ac5e11af79a8 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-uvc +++ b/Documentation/ABI/testing/configfs-usb-gadget-uvc @@ -3,9 +3,11 @@ Date: Dec 2014 KernelVersion: 4.0 Description: UVC function directory - streaming_maxburst - 0..15 (ss only) - streaming_maxpacket - 1..1023 (fs), 1..3072 (hs/ss) - streaming_interval - 1..16 + =================== ============================= + streaming_maxburst 0..15 (ss only) + streaming_maxpacket 1..1023 (fs), 1..3072 (hs/ss) + streaming_interval 1..16 + =================== ============================= What: /config/usb-gadget/gadget/functions/uvc.name/control Date: Dec 2014 @@ -13,8 +15,11 @@ KernelVersion: 4.0 Description: Control descriptors All attributes read only: - bInterfaceNumber - USB interface number for this - streaming interface + + ================ ============================= + bInterfaceNumber USB interface number for this + streaming interface + ================ ============================= What: /config/usb-gadget/gadget/functions/uvc.name/control/class Date: Dec 2014 @@ -47,13 +52,16 @@ KernelVersion: 4.0 Description: Default output terminal descriptors All attributes read only: - iTerminal - index of string descriptor - bSourceID - id of the terminal to which this terminal + + ============== ============================================= + iTerminal index of string descriptor + bSourceID id of the terminal to which this terminal is connected - bAssocTerminal - id of the input terminal to which this output + bAssocTerminal id of the input terminal to which this output terminal is associated - wTerminalType - terminal type - bTerminalID - a non-zero id of this terminal + wTerminalType terminal type + bTerminalID a non-zero id of this terminal + ============== ============================================= What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/camera Date: Dec 2014 @@ -66,16 +74,19 @@ KernelVersion: 4.0 Description: Default camera terminal descriptors All attributes read only: - bmControls - bitmap specifying which controls are - supported for the video stream - wOcularFocalLength - the value of Locular - wObjectiveFocalLengthMax- the value of Lmin - wObjectiveFocalLengthMin- the value of Lmax - iTerminal - index of string descriptor - bAssocTerminal - id of the output terminal to which - this terminal is connected - wTerminalType - terminal type - bTerminalID - a non-zero id of this terminal + + ======================== ==================================== + bmControls bitmap specifying which controls are + supported for the video stream + wOcularFocalLength the value of Locular + wObjectiveFocalLengthMax the value of Lmin + wObjectiveFocalLengthMin the value of Lmax + iTerminal index of string descriptor + bAssocTerminal id of the output terminal to which + this terminal is connected + wTerminalType terminal type + bTerminalID a non-zero id of this terminal + ======================== ==================================== What: /config/usb-gadget/gadget/functions/uvc.name/control/processing Date: Dec 2014 @@ -88,13 +99,16 @@ KernelVersion: 4.0 Description: Default processing unit descriptors All attributes read only: - iProcessing - index of string descriptor - bmControls - bitmap specifying which controls are + + =============== ======================================== + iProcessing index of string descriptor + bmControls bitmap specifying which controls are supported for the video stream - wMaxMultiplier - maximum digital magnification x100 - bSourceID - id of the terminal to which this unit is + wMaxMultiplier maximum digital magnification x100 + bSourceID id of the terminal to which this unit is connected - bUnitID - a non-zero id of this unit + bUnitID a non-zero id of this unit + =============== ======================================== What: /config/usb-gadget/gadget/functions/uvc.name/control/header Date: Dec 2014 @@ -114,8 +128,11 @@ KernelVersion: 4.0 Description: Streaming descriptors All attributes read only: - bInterfaceNumber - USB interface number for this - streaming interface + + ================ ============================= + bInterfaceNumber USB interface number for this + streaming interface + ================ ============================= What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class Date: Dec 2014 @@ -148,13 +165,16 @@ KernelVersion: 4.0 Description: Default color matching descriptors All attributes read only: - bMatrixCoefficients - matrix used to compute luma and - chroma values from the color primaries - bTransferCharacteristics- optoelectronic transfer - characteristic of the source picutre, - also called the gamma function - bColorPrimaries - color primaries and the reference - white + + ======================== ====================================== + bMatrixCoefficients matrix used to compute luma and + chroma values from the color primaries + bTransferCharacteristics optoelectronic transfer + characteristic of the source picutre, + also called the gamma function + bColorPrimaries color primaries and the reference + white + ======================== ====================================== What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg Date: Dec 2014 @@ -168,47 +188,52 @@ Description: Specific MJPEG format descriptors All attributes read only, except bmaControls and bDefaultFrameIndex: - bFormatIndex - unique id for this format descriptor; + + =================== ===================================== + bFormatIndex unique id for this format descriptor; only defined after parent header is linked into the streaming class; read-only - bmaControls - this format's data for bmaControls in + bmaControls this format's data for bmaControls in the streaming header - bmInterfaceFlags - specifies interlace information, + bmInterfaceFlags specifies interlace information, read-only - bAspectRatioY - the X dimension of the picture aspect + bAspectRatioY the X dimension of the picture aspect ratio, read-only - bAspectRatioX - the Y dimension of the picture aspect + bAspectRatioX the Y dimension of the picture aspect ratio, read-only - bmFlags - characteristics of this format, + bmFlags characteristics of this format, read-only - bDefaultFrameIndex - optimum frame index for this stream + bDefaultFrameIndex optimum frame index for this stream + =================== ===================================== What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg/name/name Date: Dec 2014 KernelVersion: 4.0 Description: Specific MJPEG frame descriptors - bFrameIndex - unique id for this framedescriptor; - only defined after parent format is - linked into the streaming header; - read-only - dwFrameInterval - indicates how frame interval can be - programmed; a number of values - separated by newline can be specified - dwDefaultFrameInterval - the frame interval the device would - like to use as default - dwMaxVideoFrameBufferSize- the maximum number of bytes the - compressor will produce for a video - frame or still image - dwMaxBitRate - the maximum bit rate at the shortest - frame interval in bps - dwMinBitRate - the minimum bit rate at the longest - frame interval in bps - wHeight - height of decoded bitmap frame in px - wWidth - width of decoded bitmam frame in px - bmCapabilities - still image support, fixed frame-rate - support + ========================= ===================================== + bFrameIndex unique id for this framedescriptor; + only defined after parent format is + linked into the streaming header; + read-only + dwFrameInterval indicates how frame interval can be + programmed; a number of values + separated by newline can be specified + dwDefaultFrameInterval the frame interval the device would + like to use as default + dwMaxVideoFrameBufferSize the maximum number of bytes the + compressor will produce for a video + frame or still image + dwMaxBitRate the maximum bit rate at the shortest + frame interval in bps + dwMinBitRate the minimum bit rate at the longest + frame interval in bps + wHeight height of decoded bitmap frame in px + wWidth width of decoded bitmam frame in px + bmCapabilities still image support, fixed frame-rate + support + ========================= ===================================== What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed Date: Dec 2014 @@ -220,50 +245,54 @@ Date: Dec 2014 KernelVersion: 4.0 Description: Specific uncompressed format descriptors - bFormatIndex - unique id for this format descriptor; + ================== ======================================= + bFormatIndex unique id for this format descriptor; only defined after parent header is linked into the streaming class; read-only - bmaControls - this format's data for bmaControls in + bmaControls this format's data for bmaControls in the streaming header - bmInterfaceFlags - specifies interlace information, + bmInterfaceFlags specifies interlace information, read-only - bAspectRatioY - the X dimension of the picture aspect + bAspectRatioY the X dimension of the picture aspect ratio, read-only - bAspectRatioX - the Y dimension of the picture aspect + bAspectRatioX the Y dimension of the picture aspect ratio, read-only - bDefaultFrameIndex - optimum frame index for this stream - bBitsPerPixel - number of bits per pixel used to + bDefaultFrameIndex optimum frame index for this stream + bBitsPerPixel number of bits per pixel used to specify color in the decoded video frame - guidFormat - globally unique id used to identify + guidFormat globally unique id used to identify stream-encoding format + ================== ======================================= What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed/name/name Date: Dec 2014 KernelVersion: 4.0 Description: Specific uncompressed frame descriptors - bFrameIndex - unique id for this framedescriptor; - only defined after parent format is - linked into the streaming header; - read-only - dwFrameInterval - indicates how frame interval can be - programmed; a number of values - separated by newline can be specified - dwDefaultFrameInterval - the frame interval the device would - like to use as default - dwMaxVideoFrameBufferSize- the maximum number of bytes the - compressor will produce for a video - frame or still image - dwMaxBitRate - the maximum bit rate at the shortest - frame interval in bps - dwMinBitRate - the minimum bit rate at the longest - frame interval in bps - wHeight - height of decoded bitmap frame in px - wWidth - width of decoded bitmam frame in px - bmCapabilities - still image support, fixed frame-rate - support + ========================= ===================================== + bFrameIndex unique id for this framedescriptor; + only defined after parent format is + linked into the streaming header; + read-only + dwFrameInterval indicates how frame interval can be + programmed; a number of values + separated by newline can be specified + dwDefaultFrameInterval the frame interval the device would + like to use as default + dwMaxVideoFrameBufferSize the maximum number of bytes the + compressor will produce for a video + frame or still image + dwMaxBitRate the maximum bit rate at the shortest + frame interval in bps + dwMinBitRate the minimum bit rate at the longest + frame interval in bps + wHeight height of decoded bitmap frame in px + wWidth width of decoded bitmam frame in px + bmCapabilities still image support, fixed frame-rate + support + ========================= ===================================== What: /config/usb-gadget/gadget/functions/uvc.name/streaming/header Date: Dec 2014 @@ -276,17 +305,20 @@ KernelVersion: 4.0 Description: Specific streaming header descriptors All attributes read only: - bTriggerUsage - how the host software will respond to + + ==================== ===================================== + bTriggerUsage how the host software will respond to a hardware trigger interrupt event - bTriggerSupport - flag specifying if hardware + bTriggerSupport flag specifying if hardware triggering is supported - bStillCaptureMethod - method of still image caputre + bStillCaptureMethod method of still image caputre supported - bTerminalLink - id of the output terminal to which + bTerminalLink id of the output terminal to which the video endpoint of this interface is connected - bmInfo - capabilities of this video streaming + bmInfo capabilities of this video streaming interface + ==================== ===================================== What: /sys/class/udc/udc.name/device/gadget/video4linux/video.name/function_name Date: May 2018 diff --git a/Documentation/ABI/testing/debugfs-cec-error-inj b/Documentation/ABI/testing/debugfs-cec-error-inj index 5afcd78fbdb7..8debcb08a3b5 100644 --- a/Documentation/ABI/testing/debugfs-cec-error-inj +++ b/Documentation/ABI/testing/debugfs-cec-error-inj @@ -23,7 +23,7 @@ error injections without having to know the details of the driver-specific commands. Note that the output of 'error-inj' shall be valid as input to 'error-inj'. -So this must work: +So this must work:: $ cat error-inj >einj.txt $ cat einj.txt >error-inj diff --git a/Documentation/ABI/testing/debugfs-driver-habanalabs b/Documentation/ABI/testing/debugfs-driver-habanalabs index 2e9ae311e02d..c5d678d39144 100644 --- a/Documentation/ABI/testing/debugfs-driver-habanalabs +++ b/Documentation/ABI/testing/debugfs-driver-habanalabs @@ -20,9 +20,13 @@ Description: Allow the root user to disable/enable in runtime the clock The user can supply a bitmask value, each bit represents a different engine to disable/enable its clock gating feature. The bitmask is composed of 20 bits: - 0 - 7 : DMA channels - 8 - 11 : MME engines - 12 - 19 : TPC engines + + ======= ============ + 0 - 7 DMA channels + 8 - 11 MME engines + 12 - 19 TPC engines + ======= ============ + The bit's location of a specific engine can be determined using (1 << GAUDI_ENGINE_ID_*). GAUDI_ENGINE_ID_* values are defined in uapi habanalabs.h file in enum gaudi_engine_id @@ -59,6 +63,7 @@ Description: Allows the root user to read or write directly through the the generic Linux user-space PCI mapping) because the DDR bar is very small compared to the DDR memory and only the driver can move the bar before and after the transaction. + If the IOMMU is disabled, it also allows the root user to read or write from the host a device VA of a host mapped memory @@ -73,6 +78,7 @@ Description: Allows the root user to read or write 64 bit data directly the generic Linux user-space PCI mapping) because the DDR bar is very small compared to the DDR memory and only the driver can move the bar before and after the transaction. + If the IOMMU is disabled, it also allows the root user to read or write from the host a device VA of a host mapped memory diff --git a/Documentation/ABI/testing/debugfs-ec b/Documentation/ABI/testing/debugfs-ec index 6546115a94da..ab6099daa8f5 100644 --- a/Documentation/ABI/testing/debugfs-ec +++ b/Documentation/ABI/testing/debugfs-ec @@ -6,7 +6,7 @@ Description: General information like which GPE is assigned to the EC and whether the global lock should get used. Knowing the EC GPE one can watch the amount of HW events related to -the EC here (XY -> GPE number from /sys/kernel/debug/ec/*/gpe): +the EC here (XY -> GPE number from `/sys/kernel/debug/ec/*/gpe`): /sys/firmware/acpi/interrupts/gpeXY The io file is binary and a userspace tool located here: @@ -14,7 +14,8 @@ ftp://ftp.suse.com/pub/people/trenn/sources/ec/ should get used to read out the 256 Embedded Controller registers or writing to them. -CAUTION: Do not write to the Embedded Controller if you don't know -what you are doing! Rebooting afterwards also is a good idea. -This can influence the way your machine is cooled and fans may -not get switched on again after you did a wrong write. +CAUTION: + Do not write to the Embedded Controller if you don't know + what you are doing! Rebooting afterwards also is a good idea. + This can influence the way your machine is cooled and fans may + not get switched on again after you did a wrong write. diff --git a/Documentation/ABI/testing/debugfs-moxtet b/Documentation/ABI/testing/debugfs-moxtet index 67b1717794d8..6eee10c3d5a1 100644 --- a/Documentation/ABI/testing/debugfs-moxtet +++ b/Documentation/ABI/testing/debugfs-moxtet @@ -2,13 +2,19 @@ What: /sys/kernel/debug/moxtet/input Date: March 2019 KernelVersion: 5.3 Contact: Marek Behún <marek.behun@nic.cz> -Description: (R) Read input from the shift registers, in hexadecimal. +Description: (Read) Read input from the shift registers, in hexadecimal. Returns N+1 bytes, where N is the number of Moxtet connected modules. The first byte is from the CPU board itself. - Example: 101214 - 10: CPU board with SD card - 12: 2 = PCIe module, 1 = IRQ not active - 14: 4 = Peridot module, 1 = IRQ not active + + Example:: + + 101214 + + == ======================================= + 10 CPU board with SD card + 12 2 = PCIe module, 1 = IRQ not active + 14 4 = Peridot module, 1 = IRQ not active + == ======================================= What: /sys/kernel/debug/moxtet/output Date: March 2019 @@ -17,7 +23,13 @@ Contact: Marek Behún <marek.behun@nic.cz> Description: (RW) Read last written value to the shift registers, in hexadecimal, or write values to the shift registers, also in hexadecimal. - Example: 0102 - 01: 01 was last written, or is to be written, to the - first module's shift register - 02: the same for second module + + Example:: + + 0102 + + == ================================================ + 01 01 was last written, or is to be written, to the + first module's shift register + 02 the same for second module + == ================================================ diff --git a/Documentation/ABI/testing/debugfs-pfo-nx-crypto b/Documentation/ABI/testing/debugfs-pfo-nx-crypto index 685d5a448423..f75a655c1531 100644 --- a/Documentation/ABI/testing/debugfs-pfo-nx-crypto +++ b/Documentation/ABI/testing/debugfs-pfo-nx-crypto @@ -4,42 +4,42 @@ KernelVersion: 3.4 Contact: Kent Yoder <key@linux.vnet.ibm.com> Description: - These debugfs interfaces are built by the nx-crypto driver, built in +These debugfs interfaces are built by the nx-crypto driver, built in arch/powerpc/crypto/nx. Error Detection =============== errors: -- A u32 providing a total count of errors since the driver was loaded. The -only errors counted here are those returned from the hcall, H_COP_OP. + A u32 providing a total count of errors since the driver was loaded. The + only errors counted here are those returned from the hcall, H_COP_OP. last_error: -- The most recent non-zero return code from the H_COP_OP hcall. -EBUSY is not -recorded here (the hcall will retry until -EBUSY goes away). + The most recent non-zero return code from the H_COP_OP hcall. -EBUSY is not + recorded here (the hcall will retry until -EBUSY goes away). last_error_pid: -- The process ID of the process who received the most recent error from the -hcall. + The process ID of the process who received the most recent error from the + hcall. Device Use ========== aes_bytes: -- The total number of bytes encrypted using AES in any of the driver's -supported modes. + The total number of bytes encrypted using AES in any of the driver's + supported modes. aes_ops: -- The total number of AES operations submitted to the hardware. + The total number of AES operations submitted to the hardware. sha256_bytes: -- The total number of bytes hashed by the hardware using SHA-256. + The total number of bytes hashed by the hardware using SHA-256. sha256_ops: -- The total number of SHA-256 operations submitted to the hardware. + The total number of SHA-256 operations submitted to the hardware. sha512_bytes: -- The total number of bytes hashed by the hardware using SHA-512. + The total number of bytes hashed by the hardware using SHA-512. sha512_ops: -- The total number of SHA-512 operations submitted to the hardware. + The total number of SHA-512 operations submitted to the hardware. diff --git a/Documentation/ABI/testing/debugfs-pktcdvd b/Documentation/ABI/testing/debugfs-pktcdvd index cf11736acb76..f6f65a4faea0 100644 --- a/Documentation/ABI/testing/debugfs-pktcdvd +++ b/Documentation/ABI/testing/debugfs-pktcdvd @@ -4,16 +4,15 @@ KernelVersion: 2.6.20 Contact: Thomas Maier <balagi@justmail.de> Description: -debugfs interface ------------------ - The pktcdvd module (packet writing driver) creates these files in debugfs: /sys/kernel/debug/pktcdvd/pktcdvd[0-7]/ - info (0444) Lots of driver statistics and infos. -Example: -------- + ==== ====== ==================================== + info 0444 Lots of driver statistics and infos. + ==== ====== ==================================== + +Example:: -cat /sys/kernel/debug/pktcdvd/pktcdvd0/info + cat /sys/kernel/debug/pktcdvd/pktcdvd0/info diff --git a/Documentation/ABI/testing/debugfs-turris-mox-rwtm b/Documentation/ABI/testing/debugfs-turris-mox-rwtm index 2b3255ee68fd..326df1b74707 100644 --- a/Documentation/ABI/testing/debugfs-turris-mox-rwtm +++ b/Documentation/ABI/testing/debugfs-turris-mox-rwtm @@ -2,8 +2,13 @@ What: /sys/kernel/debug/turris-mox-rwtm/do_sign Date: Jun 2020 KernelVersion: 5.8 Contact: Marek Behún <marek.behun@nic.cz> -Description: (W) Message to sign with the ECDSA private key stored in - device's OTP. The message must be exactly 64 bytes (since - this is intended for SHA-512 hashes). - (R) The resulting signature, 136 bytes. This contains the R and - S values of the ECDSA signature, both in big-endian format. +Description: + + ======= =========================================================== + (Write) Message to sign with the ECDSA private key stored in + device's OTP. The message must be exactly 64 bytes + (since this is intended for SHA-512 hashes). + (Read) The resulting signature, 136 bytes. This contains the + R and S values of the ECDSA signature, both in + big-endian format. + ======= =========================================================== diff --git a/Documentation/ABI/testing/debugfs-wilco-ec b/Documentation/ABI/testing/debugfs-wilco-ec index 9d8d9d2def5b..682e3c09ef4d 100644 --- a/Documentation/ABI/testing/debugfs-wilco-ec +++ b/Documentation/ABI/testing/debugfs-wilco-ec @@ -27,16 +27,17 @@ Description: for writing, two for the type and at least a single byte of data. - Example: - // Request EC info type 3 (EC firmware build date) - // Corresponds with sending type 0x00f0 with - // MBOX = [38, 00, 03, 00] - $ echo 00 f0 38 00 03 00 > /sys/kernel/debug/wilco_ec/raw - // View the result. The decoded ASCII result "12/21/18" is - // included after the raw hex. - // Corresponds with MBOX = [00, 00, 31, 32, 2f, 32, 31, 38, ...] - $ cat /sys/kernel/debug/wilco_ec/raw - 00 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00 ..12/21/18.8... + Example:: + + // Request EC info type 3 (EC firmware build date) + // Corresponds with sending type 0x00f0 with + // MBOX = [38, 00, 03, 00] + $ echo 00 f0 38 00 03 00 > /sys/kernel/debug/wilco_ec/raw + // View the result. The decoded ASCII result "12/21/18" is + // included after the raw hex. + // Corresponds with MBOX = [00, 00, 31, 32, 2f, 32, 31, 38, ...] + $ cat /sys/kernel/debug/wilco_ec/raw + 00 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00 ..12/21/18.8... Note that the first 16 bytes of the received MBOX[] will be printed, even if some of the data is junk, and skipping bytes diff --git a/Documentation/ABI/testing/dell-smbios-wmi b/Documentation/ABI/testing/dell-smbios-wmi index fc919ce16008..5f3a0dc67050 100644 --- a/Documentation/ABI/testing/dell-smbios-wmi +++ b/Documentation/ABI/testing/dell-smbios-wmi @@ -10,29 +10,29 @@ Description: <uapi/linux/wmi.h> 1) To perform an SMBIOS call from userspace, you'll need to - first determine the minimum size of the calling interface - buffer for your machine. - Platforms that contain larger buffers can return larger - objects from the system firmware. - Commonly this size is either 4k or 32k. + first determine the minimum size of the calling interface + buffer for your machine. + Platforms that contain larger buffers can return larger + objects from the system firmware. + Commonly this size is either 4k or 32k. - To determine the size of the buffer read() a u64 dword from - the WMI character device /dev/wmi/dell-smbios. + To determine the size of the buffer read() a u64 dword from + the WMI character device /dev/wmi/dell-smbios. 2) After you've determined the minimum size of the calling - interface buffer, you can allocate a structure that represents - the structure documented above. + interface buffer, you can allocate a structure that represents + the structure documented above. 3) In the 'length' object store the size of the buffer you - determined above and allocated. + determined above and allocated. 4) In this buffer object, prepare as necessary for the SMBIOS - call you're interested in. Typically SMBIOS buffers have - "class", "select", and "input" defined to values that coincide - with the data you are interested in. - Documenting class/select/input values is outside of the scope - of this documentation. Check with the libsmbios project for - further documentation on these values. + call you're interested in. Typically SMBIOS buffers have + "class", "select", and "input" defined to values that coincide + with the data you are interested in. + Documenting class/select/input values is outside of the scope + of this documentation. Check with the libsmbios project for + further documentation on these values. 6) Run the call by using ioctl() as described in the header. diff --git a/Documentation/ABI/testing/dev-kmsg b/Documentation/ABI/testing/dev-kmsg index 3c0bb76e3417..a377b6c093c9 100644 --- a/Documentation/ABI/testing/dev-kmsg +++ b/Documentation/ABI/testing/dev-kmsg @@ -6,6 +6,7 @@ Description: The /dev/kmsg character device node provides userspace access to the kernel's printk buffer. Injecting messages: + Every write() to the opened device node places a log entry in the kernel's printk buffer. @@ -21,6 +22,7 @@ Description: The /dev/kmsg character device node provides userspace access the messages can always be reliably determined. Accessing the buffer: + Every read() from the opened device node receives one record of the kernel's printk buffer. @@ -48,6 +50,7 @@ Description: The /dev/kmsg character device node provides userspace access if needed, without limiting the interface to a single reader. The device supports seek with the following parameters: + SEEK_SET, 0 seek to the first entry in the buffer SEEK_END, 0 @@ -87,18 +90,22 @@ Description: The /dev/kmsg character device node provides userspace access readable context of the message, for reliable processing in userspace. - Example: - 7,160,424069,-;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) - SUBSYSTEM=acpi - DEVICE=+acpi:PNP0A03:00 - 6,339,5140900,-;NET: Registered protocol family 10 - 30,340,5690716,-;udevd[80]: starting version 181 + Example:: + + 7,160,424069,-;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) + SUBSYSTEM=acpi + DEVICE=+acpi:PNP0A03:00 + 6,339,5140900,-;NET: Registered protocol family 10 + 30,340,5690716,-;udevd[80]: starting version 181 The DEVICE= key uniquely identifies devices the following way: - b12:8 - block dev_t - c127:3 - char dev_t - n8 - netdev ifindex - +sound:card0 - subsystem:devname + + ============ ================= + b12:8 block dev_t + c127:3 char dev_t + n8 netdev ifindex + +sound:card0 subsystem:devname + ============ ================= The flags field carries '-' by default. A 'c' indicates a fragment of a line. Note, that these hints about continuation diff --git a/Documentation/ABI/testing/evm b/Documentation/ABI/testing/evm index 201d10319fa1..3c477ba48a31 100644 --- a/Documentation/ABI/testing/evm +++ b/Documentation/ABI/testing/evm @@ -17,26 +17,33 @@ Description: echoing a value to <securityfs>/evm made up of the following bits: + === ================================================== Bit Effect + === ================================================== 0 Enable HMAC validation and creation 1 Enable digital signature validation 2 Permit modification of EVM-protected metadata at runtime. Not supported if HMAC validation and creation is enabled. 31 Disable further runtime modification of EVM policy + === ================================================== - For example: + For example:: - echo 1 ><securityfs>/evm + echo 1 ><securityfs>/evm will enable HMAC validation and creation - echo 0x80000003 ><securityfs>/evm + :: + + echo 0x80000003 ><securityfs>/evm will enable HMAC and digital signature validation and HMAC creation and disable all further modification of policy. - echo 0x80000006 ><securityfs>/evm + :: + + echo 0x80000006 ><securityfs>/evm will enable digital signature validation, permit modification of EVM-protected metadata and @@ -65,7 +72,7 @@ Description: Shows the set of extended attributes used to calculate or validate the EVM signature, and allows additional attributes to be added at runtime. Any signatures generated after - additional attributes are added (and on files posessing those + additional attributes are added (and on files possessing those additional attributes) will only be valid if the same additional attributes are configured on system boot. Writing a single period (.) will lock the xattr list from any further diff --git a/Documentation/ABI/testing/gpio-cdev b/Documentation/ABI/testing/gpio-cdev index 7b265fbb47e3..66bdcd188b6c 100644 --- a/Documentation/ABI/testing/gpio-cdev +++ b/Documentation/ABI/testing/gpio-cdev @@ -12,15 +12,16 @@ Description: The following file operations are supported: open(2) - Currently the only useful flags are O_RDWR. + Currently the only useful flags are O_RDWR. ioctl(2) - Initiate various actions. - See the inline documentation in [include/uapi]<linux/gpio.h> - for descriptions of all ioctls. + Initiate various actions. + + See the inline documentation in [include/uapi]<linux/gpio.h> + for descriptions of all ioctls. close(2) - Stops and free up the I/O contexts that was associated - with the file descriptor. + Stops and free up the I/O contexts that was associated + with the file descriptor. Users: TBD diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy index cd572912c593..e35263f97fc1 100644 --- a/Documentation/ABI/testing/ima_policy +++ b/Documentation/ABI/testing/ima_policy @@ -15,19 +15,22 @@ Description: IMA appraisal, if configured, uses these file measurements for local measurement appraisal. - rule format: action [condition ...] + :: - action: measure | dont_measure | appraise | dont_appraise | - audit | hash | dont_hash - condition:= base | lsm [option] + rule format: action [condition ...] + + action: measure | dont_measure | appraise | dont_appraise | + audit | hash | dont_hash + condition:= base | lsm [option] base: [[func=] [mask=] [fsmagic=] [fsuuid=] [uid=] [euid=] [fowner=] [fsname=]] lsm: [[subj_user=] [subj_role=] [subj_type=] [obj_user=] [obj_role=] [obj_type=]] option: [[appraise_type=]] [template=] [permit_directio] [appraise_flag=] [keyrings=] - base: func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK][MODULE_CHECK] - [FIRMWARE_CHECK] + base: + func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK]MODULE_CHECK] + [FIRMWARE_CHECK] [KEXEC_KERNEL_CHECK] [KEXEC_INITRAMFS_CHECK] [KEXEC_CMDLINE] [KEY_CHECK] mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND] @@ -37,8 +40,9 @@ Description: uid:= decimal value euid:= decimal value fowner:= decimal value - lsm: are LSM specific - option: appraise_type:= [imasig] [imasig|modsig] + lsm: are LSM specific + option: + appraise_type:= [imasig] [imasig|modsig] appraise_flag:= [check_blacklist] Currently, blacklist check is only for files signed with appended signature. @@ -49,7 +53,7 @@ Description: (eg, ima-ng). Only valid when action is "measure". pcr:= decimal value - default policy: + default policy: # PROC_SUPER_MAGIC dont_measure fsmagic=0x9fa0 dont_appraise fsmagic=0x9fa0 @@ -97,7 +101,8 @@ Description: Examples of LSM specific definitions: - SELinux: + SELinux:: + dont_measure obj_type=var_log_t dont_appraise obj_type=var_log_t dont_measure obj_type=auditd_log_t @@ -105,10 +110,11 @@ Description: measure subj_user=system_u func=FILE_CHECK mask=MAY_READ measure subj_role=system_r func=FILE_CHECK mask=MAY_READ - Smack: + Smack:: + measure subj_user=_ func=FILE_CHECK mask=MAY_READ - Example of measure rules using alternate PCRs: + Example of measure rules using alternate PCRs:: measure func=KEXEC_KERNEL_CHECK pcr=4 measure func=KEXEC_INITRAMFS_CHECK pcr=5 diff --git a/Documentation/ABI/testing/procfs-diskstats b/Documentation/ABI/testing/procfs-diskstats index 70dcaf2481f4..e58d641443d3 100644 --- a/Documentation/ABI/testing/procfs-diskstats +++ b/Documentation/ABI/testing/procfs-diskstats @@ -6,32 +6,38 @@ Description: of block devices. Each line contains the following 14 fields: - 1 - major number - 2 - minor mumber - 3 - device name - 4 - reads completed successfully - 5 - reads merged - 6 - sectors read - 7 - time spent reading (ms) - 8 - writes completed - 9 - writes merged - 10 - sectors written - 11 - time spent writing (ms) - 12 - I/Os currently in progress - 13 - time spent doing I/Os (ms) - 14 - weighted time spent doing I/Os (ms) + == =================================== + 1 major number + 2 minor mumber + 3 device name + 4 reads completed successfully + 5 reads merged + 6 sectors read + 7 time spent reading (ms) + 8 writes completed + 9 writes merged + 10 sectors written + 11 time spent writing (ms) + 12 I/Os currently in progress + 13 time spent doing I/Os (ms) + 14 weighted time spent doing I/Os (ms) + == =================================== Kernel 4.18+ appends four more fields for discard tracking putting the total at 18: - 15 - discards completed successfully - 16 - discards merged - 17 - sectors discarded - 18 - time spent discarding + == =================================== + 15 discards completed successfully + 16 discards merged + 17 sectors discarded + 18 time spent discarding + == =================================== Kernel 5.5+ appends two more fields for flush requests: - 19 - flush requests completed successfully - 20 - time spent flushing + == ===================================== + 19 flush requests completed successfully + 20 time spent flushing + == ===================================== For more details refer to Documentation/admin-guide/iostats.rst diff --git a/Documentation/ABI/testing/procfs-smaps_rollup b/Documentation/ABI/testing/procfs-smaps_rollup index 046978193368..a4e31c465194 100644 --- a/Documentation/ABI/testing/procfs-smaps_rollup +++ b/Documentation/ABI/testing/procfs-smaps_rollup @@ -14,28 +14,28 @@ Description: For more details, see Documentation/filesystems/proc.rst and the procfs man page. - Typical output looks like this: + Typical output looks like this:: - 00100000-ff709000 ---p 00000000 00:00 0 [rollup] - Size: 1192 kB - KernelPageSize: 4 kB - MMUPageSize: 4 kB - Rss: 884 kB - Pss: 385 kB - Pss_Anon: 301 kB - Pss_File: 80 kB - Pss_Shmem: 4 kB - Shared_Clean: 696 kB - Shared_Dirty: 0 kB - Private_Clean: 120 kB - Private_Dirty: 68 kB - Referenced: 884 kB - Anonymous: 68 kB - LazyFree: 0 kB - AnonHugePages: 0 kB - ShmemPmdMapped: 0 kB - Shared_Hugetlb: 0 kB - Private_Hugetlb: 0 kB - Swap: 0 kB - SwapPss: 0 kB - Locked: 385 kB + 00100000-ff709000 ---p 00000000 00:00 0 [rollup] + Size: 1192 kB + KernelPageSize: 4 kB + MMUPageSize: 4 kB + Rss: 884 kB + Pss: 385 kB + Pss_Anon: 301 kB + Pss_File: 80 kB + Pss_Shmem: 4 kB + Shared_Clean: 696 kB + Shared_Dirty: 0 kB + Private_Clean: 120 kB + Private_Dirty: 68 kB + Referenced: 884 kB + Anonymous: 68 kB + LazyFree: 0 kB + AnonHugePages: 0 kB + ShmemPmdMapped: 0 kB + Shared_Hugetlb: 0 kB + Private_Hugetlb: 0 kB + Swap: 0 kB + SwapPss: 0 kB + Locked: 385 kB diff --git a/Documentation/ABI/testing/pstore b/Documentation/ABI/testing/pstore index d45209abdb1b..5b02540781a2 100644 --- a/Documentation/ABI/testing/pstore +++ b/Documentation/ABI/testing/pstore @@ -9,25 +9,25 @@ Description: Generic interface to platform dependent persistent storage. provide a generic interface to show records captured in the dying moments. In the case of a panic the last part of the console log is captured, but other interesting - data can also be saved. + data can also be saved:: - # mount -t pstore -o kmsg_bytes=8000 - /sys/fs/pstore + # mount -t pstore -o kmsg_bytes=8000 - /sys/fs/pstore - $ ls -l /sys/fs/pstore/ - total 0 - -r--r--r-- 1 root root 7896 Nov 30 15:38 dmesg-erst-1 + $ ls -l /sys/fs/pstore/ + total 0 + -r--r--r-- 1 root root 7896 Nov 30 15:38 dmesg-erst-1 Different users of this interface will result in different filename prefixes. Currently two are defined: - "dmesg" - saved console log - "mce" - architecture dependent data from fatal h/w error + - "dmesg" - saved console log + - "mce" - architecture dependent data from fatal h/w error Once the information in a file has been read, removing the file will signal to the underlying persistent storage - device that it can reclaim the space for later re-use. + device that it can reclaim the space for later re-use:: - $ rm /sys/fs/pstore/dmesg-erst-1 + $ rm /sys/fs/pstore/dmesg-erst-1 The expectation is that all files in /sys/fs/pstore/ will be saved elsewhere and erased from persistent store @@ -44,4 +44,3 @@ Description: Generic interface to platform dependent persistent storage. backends are available, the preferred backend may be set by passing the pstore.backend= argument to the kernel at boot time. - diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block index 2322eb748b38..e34cdeeeb9d4 100644 --- a/Documentation/ABI/testing/sysfs-block +++ b/Documentation/ABI/testing/sysfs-block @@ -4,23 +4,27 @@ Contact: Jerome Marchand <jmarchan@redhat.com> Description: The /sys/block/<disk>/stat files displays the I/O statistics of disk <disk>. They contain 11 fields: - 1 - reads completed successfully - 2 - reads merged - 3 - sectors read - 4 - time spent reading (ms) - 5 - writes completed - 6 - writes merged - 7 - sectors written - 8 - time spent writing (ms) - 9 - I/Os currently in progress - 10 - time spent doing I/Os (ms) - 11 - weighted time spent doing I/Os (ms) - 12 - discards completed - 13 - discards merged - 14 - sectors discarded - 15 - time spent discarding (ms) - 16 - flush requests completed - 17 - time spent flushing (ms) + + == ============================================== + 1 reads completed successfully + 2 reads merged + 3 sectors read + 4 time spent reading (ms) + 5 writes completed + 6 writes merged + 7 sectors written + 8 time spent writing (ms) + 9 I/Os currently in progress + 10 time spent doing I/Os (ms) + 11 weighted time spent doing I/Os (ms) + 12 discards completed + 13 discards merged + 14 sectors discarded + 15 time spent discarding (ms) + 16 flush requests completed + 17 time spent flushing (ms) + == ============================================== + For more details refer Documentation/admin-guide/iostats.rst diff --git a/Documentation/ABI/testing/sysfs-block-device b/Documentation/ABI/testing/sysfs-block-device index 17f2bc7dd261..aa0fb500e3c9 100644 --- a/Documentation/ABI/testing/sysfs-block-device +++ b/Documentation/ABI/testing/sysfs-block-device @@ -8,11 +8,13 @@ Description: It has the following valid values: + == ======================================================== 0 OFF - the LED is not activated on activity 1 BLINK_ON - the LED blinks on every 10ms when activity is detected. 2 BLINK_OFF - the LED is on when idle, and blinks off every 10ms when activity is detected. + == ======================================================== Note that the user must turn sw_activity OFF it they wish to control the activity LED via the em_message file. diff --git a/Documentation/ABI/testing/sysfs-block-rnbd b/Documentation/ABI/testing/sysfs-block-rnbd index 8f070b47f361..14a6fe9422b3 100644 --- a/Documentation/ABI/testing/sysfs-block-rnbd +++ b/Documentation/ABI/testing/sysfs-block-rnbd @@ -9,9 +9,9 @@ Description: To unmap a volume, "normal" or "force" has to be written to: is using the device. When "force" is used, the device is also unmapped when device is in use. All I/Os that are in progress will fail. - Example: + Example:: - # echo "normal" > /sys/block/rnbd0/rnbd/unmap_device + # echo "normal" > /sys/block/rnbd0/rnbd/unmap_device What: /sys/block/rnbd<N>/rnbd/state Date: Feb 2020 diff --git a/Documentation/ABI/testing/sysfs-bus-acpi b/Documentation/ABI/testing/sysfs-bus-acpi index e7898cfe5fb1..58abacf59b2a 100644 --- a/Documentation/ABI/testing/sysfs-bus-acpi +++ b/Documentation/ABI/testing/sysfs-bus-acpi @@ -5,6 +5,7 @@ Description: This attribute indicates the full path of ACPI namespace object associated with the device object. For example, \_SB_.PCI0. + This file is not present for device objects representing fixed ACPI hardware features (like power and sleep buttons). @@ -67,14 +68,16 @@ Description: The return value is a decimal integer representing the device's status bitmap: - Bit [0] – Set if the device is present. - Bit [1] – Set if the device is enabled and decoding its - resources. - Bit [2] – Set if the device should be shown in the UI. - Bit [3] – Set if the device is functioning properly (cleared if - device failed its diagnostics). - Bit [4] – Set if the battery is present. - Bits [31:5] – Reserved (must be cleared) + =========== ================================================== + Bit [0] Set if the device is present. + Bit [1] Set if the device is enabled and decoding its + resources. + Bit [2] Set if the device should be shown in the UI. + Bit [3] Set if the device is functioning properly (cleared + if device failed its diagnostics). + Bit [4] Set if the battery is present. + Bits [31:5] Reserved (must be cleared) + =========== ================================================== If bit [0] is clear, then bit 1 must also be clear (a device that is not present cannot be enabled). diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-cti b/Documentation/ABI/testing/sysfs-bus-coresight-devices-cti index 9d11502b4390..bf2869c413e7 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-cti +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-cti @@ -8,50 +8,50 @@ What: /sys/bus/coresight/devices/<cti-name>/powered Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (R) Indicate if the CTI hardware is powered. +Description: (Read) Indicate if the CTI hardware is powered. What: /sys/bus/coresight/devices/<cti-name>/ctmid Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (R) Display the associated CTM ID +Description: (Read) Display the associated CTM ID What: /sys/bus/coresight/devices/<cti-name>/nr_trigger_cons Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (R) Number of devices connected to triggers on this CTI +Description: (Read) Number of devices connected to triggers on this CTI What: /sys/bus/coresight/devices/<cti-name>/triggers<N>/name Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (R) Name of connected device <N> +Description: (Read) Name of connected device <N> What: /sys/bus/coresight/devices/<cti-name>/triggers<N>/in_signals Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (R) Input trigger signals from connected device <N> +Description: (Read) Input trigger signals from connected device <N> What: /sys/bus/coresight/devices/<cti-name>/triggers<N>/in_types Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (R) Functional types for the input trigger signals +Description: (Read) Functional types for the input trigger signals from connected device <N> What: /sys/bus/coresight/devices/<cti-name>/triggers<N>/out_signals Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (R) Output trigger signals to connected device <N> +Description: (Read) Output trigger signals to connected device <N> What: /sys/bus/coresight/devices/<cti-name>/triggers<N>/out_types Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (R) Functional types for the output trigger signals +Description: (Read) Functional types for the output trigger signals to connected device <N> What: /sys/bus/coresight/devices/<cti-name>/regs/inout_sel @@ -88,7 +88,7 @@ What: /sys/bus/coresight/devices/<cti-name>/regs/intack Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (W) Write the INTACK register. +Description: (Write) Write the INTACK register. What: /sys/bus/coresight/devices/<cti-name>/regs/appset Date: March 2020 @@ -101,99 +101,99 @@ What: /sys/bus/coresight/devices/<cti-name>/regs/appclear Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (W) Write APPCLEAR register to deactivate channel. +Description: (Write) Write APPCLEAR register to deactivate channel. What: /sys/bus/coresight/devices/<cti-name>/regs/apppulse Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (W) Write APPPULSE to pulse a channel active for one clock +Description: (Write) Write APPPULSE to pulse a channel active for one clock cycle. What: /sys/bus/coresight/devices/<cti-name>/regs/chinstatus Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (R) Read current status of channel inputs. +Description: (Read) Read current status of channel inputs. What: /sys/bus/coresight/devices/<cti-name>/regs/choutstatus Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (R) read current status of channel outputs. +Description: (Read) read current status of channel outputs. What: /sys/bus/coresight/devices/<cti-name>/regs/triginstatus Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (R) read current status of input trigger signals +Description: (Read) read current status of input trigger signals What: /sys/bus/coresight/devices/<cti-name>/regs/trigoutstatus Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (R) read current status of output trigger signals. +Description: (Read) read current status of output trigger signals. What: /sys/bus/coresight/devices/<cti-name>/channels/trigin_attach Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (W) Attach a CTI input trigger to a CTM channel. +Description: (Write) Attach a CTI input trigger to a CTM channel. What: /sys/bus/coresight/devices/<cti-name>/channels/trigin_detach Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (W) Detach a CTI input trigger from a CTM channel. +Description: (Write) Detach a CTI input trigger from a CTM channel. What: /sys/bus/coresight/devices/<cti-name>/channels/trigout_attach Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (W) Attach a CTI output trigger to a CTM channel. +Description: (Write) Attach a CTI output trigger to a CTM channel. What: /sys/bus/coresight/devices/<cti-name>/channels/trigout_detach Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (W) Detach a CTI output trigger from a CTM channel. +Description: (Write) Detach a CTI output trigger from a CTM channel. What: /sys/bus/coresight/devices/<cti-name>/channels/chan_gate_enable Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (RW) Enable CTIGATE for single channel (W) or list enabled +Description: (RW) Enable CTIGATE for single channel (Write) or list enabled channels through the gate (R). What: /sys/bus/coresight/devices/<cti-name>/channels/chan_gate_disable Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (W) Disable CTIGATE for single channel. +Description: (Write) Disable CTIGATE for single channel. What: /sys/bus/coresight/devices/<cti-name>/channels/chan_set Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (W) Activate a single channel. +Description: (Write) Activate a single channel. What: /sys/bus/coresight/devices/<cti-name>/channels/chan_clear Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (W) Deactivate a single channel. +Description: (Write) Deactivate a single channel. What: /sys/bus/coresight/devices/<cti-name>/channels/chan_pulse Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (W) Pulse a single channel - activate for a single clock cycle. +Description: (Write) Pulse a single channel - activate for a single clock cycle. What: /sys/bus/coresight/devices/<cti-name>/channels/trigout_filtered Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (R) List of output triggers filtered across all connections. +Description: (Read) List of output triggers filtered across all connections. What: /sys/bus/coresight/devices/<cti-name>/channels/trig_filter_enable Date: March 2020 @@ -205,13 +205,13 @@ What: /sys/bus/coresight/devices/<cti-name>/channels/chan_inuse Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (R) show channels with at least one attached trigger signal. +Description: (Read) show channels with at least one attached trigger signal. What: /sys/bus/coresight/devices/<cti-name>/channels/chan_free Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (R) show channels with no attached trigger signals. +Description: (Read) show channels with no attached trigger signals. What: /sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_sel Date: March 2020 @@ -224,18 +224,18 @@ What: /sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_in Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (R) Read to see input triggers connected to selected view +Description: (Read) Read to see input triggers connected to selected view channel. What: /sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_out Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (R) Read to see output triggers connected to selected view +Description: (Read) Read to see output triggers connected to selected view channel. What: /sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_reset Date: March 2020 KernelVersion 5.7 Contact: Mike Leach or Mathieu Poirier -Description: (W) Clear all channel / trigger programming. +Description: (Write) Clear all channel / trigger programming. diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10 b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10 index b5f526081711..9a383f6a74eb 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10 +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10 @@ -4,7 +4,10 @@ KernelVersion: 3.19 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> Description: (RW) Add/remove a sink from a trace path. There can be multiple source for a single sink. - ex: echo 1 > /sys/bus/coresight/devices/20010000.etb/enable_sink + + ex:: + + echo 1 > /sys/bus/coresight/devices/20010000.etb/enable_sink What: /sys/bus/coresight/devices/<memory_map>.etb/trigger_cntr Date: November 2014 @@ -20,21 +23,21 @@ What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/rdp Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Defines the depth, in words, of the trace RAM in powers of +Description: (Read) Defines the depth, in words, of the trace RAM in powers of 2. The value is read directly from HW register RDP, 0x004. What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/sts Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Shows the value held by the ETB status register. The value +Description: (Read) Shows the value held by the ETB status register. The value is read directly from HW register STS, 0x00C. What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/rrp Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Shows the value held by the ETB RAM Read Pointer register +Description: (Read) Shows the value held by the ETB RAM Read Pointer register that is used to read entries from the Trace RAM over the APB interface. The value is read directly from HW register RRP, 0x014. @@ -43,7 +46,7 @@ What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/rwp Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Shows the value held by the ETB RAM Write Pointer register +Description: (Read) Shows the value held by the ETB RAM Write Pointer register that is used to sets the write pointer to write entries from the CoreSight bus into the Trace RAM. The value is read directly from HW register RWP, 0x018. @@ -52,21 +55,21 @@ What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/trg Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Similar to "trigger_cntr" above except that this value is +Description: (Read) Similar to "trigger_cntr" above except that this value is read directly from HW register TRG, 0x01C. What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/ctl Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Shows the value held by the ETB Control register. The value +Description: (Read) Shows the value held by the ETB Control register. The value is read directly from HW register CTL, 0x020. What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/ffsr Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Shows the value held by the ETB Formatter and Flush Status +Description: (Read) Shows the value held by the ETB Formatter and Flush Status register. The value is read directly from HW register FFSR, 0x300. @@ -74,6 +77,6 @@ What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/ffcr Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Shows the value held by the ETB Formatter and Flush Control +Description: (Read) Shows the value held by the ETB Formatter and Flush Control register. The value is read directly from HW register FFCR, 0x304. diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x index 924265a1295d..651602a61eac 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x @@ -146,28 +146,28 @@ What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/nr_addr_cmp Date: November 2014 KernelVersion: 3.19 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Provides the number of address comparators pairs accessible +Description: (Read) Provides the number of address comparators pairs accessible on a trace unit, as specified by bit 3:0 of register ETMCCR. What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/nr_cntr Date: November 2014 KernelVersion: 3.19 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Provides the number of counters accessible on a trace unit, +Description: (Read) Provides the number of counters accessible on a trace unit, as specified by bit 15:13 of register ETMCCR. What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/nr_ctxid_cmp Date: November 2014 KernelVersion: 3.19 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Provides the number of context ID comparator available on a +Description: (Read) Provides the number of context ID comparator available on a trace unit, as specified by bit 25:24 of register ETMCCR. What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/reset Date: November 2014 KernelVersion: 3.19 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (W) Cancels all configuration on a trace unit and set it back +Description: (Write) Cancels all configuration on a trace unit and set it back to its boot configuration. What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/seq_12_event @@ -216,7 +216,7 @@ What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/curr_seq_state Date: November 2014 KernelVersion: 3.19 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Holds the current state of the sequencer. +Description: (Read) Holds the current state of the sequencer. What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/sync_freq Date: November 2014 diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x index 614874e2cf53..881f0cd99ce4 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x @@ -12,75 +12,75 @@ What: /sys/bus/coresight/devices/etm<N>/cpu Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) The CPU this tracing entity is associated with. +Description: (Read) The CPU this tracing entity is associated with. What: /sys/bus/coresight/devices/etm<N>/nr_pe_cmp Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Indicates the number of PE comparator inputs that are +Description: (Read) Indicates the number of PE comparator inputs that are available for tracing. What: /sys/bus/coresight/devices/etm<N>/nr_addr_cmp Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Indicates the number of address comparator pairs that are +Description: (Read) Indicates the number of address comparator pairs that are available for tracing. What: /sys/bus/coresight/devices/etm<N>/nr_cntr Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Indicates the number of counters that are available for +Description: (Read) Indicates the number of counters that are available for tracing. What: /sys/bus/coresight/devices/etm<N>/nr_ext_inp Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Indicates how many external inputs are implemented. +Description: (Read) Indicates how many external inputs are implemented. What: /sys/bus/coresight/devices/etm<N>/numcidc Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Indicates the number of Context ID comparators that are +Description: (Read) Indicates the number of Context ID comparators that are available for tracing. What: /sys/bus/coresight/devices/etm<N>/numvmidc Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Indicates the number of VMID comparators that are available +Description: (Read) Indicates the number of VMID comparators that are available for tracing. What: /sys/bus/coresight/devices/etm<N>/nrseqstate Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Indicates the number of sequencer states that are +Description: (Read) Indicates the number of sequencer states that are implemented. What: /sys/bus/coresight/devices/etm<N>/nr_resource Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Indicates the number of resource selection pairs that are +Description: (Read) Indicates the number of resource selection pairs that are available for tracing. What: /sys/bus/coresight/devices/etm<N>/nr_ss_cmp Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Indicates the number of single-shot comparator controls that +Description: (Read) Indicates the number of single-shot comparator controls that are available for tracing. What: /sys/bus/coresight/devices/etm<N>/reset Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (W) Cancels all configuration on a trace unit and set it back +Description: (Write) Cancels all configuration on a trace unit and set it back to its boot configuration. What: /sys/bus/coresight/devices/etm<N>/mode @@ -300,7 +300,7 @@ What: /sys/bus/coresight/devices/etm<N>/addr_cmp_view Date: December 2019 KernelVersion: 5.5 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Print the current settings for the selected address +Description: (Read) Print the current settings for the selected address comparator. What: /sys/bus/coresight/devices/etm<N>/sshot_idx @@ -319,7 +319,7 @@ What: /sys/bus/coresight/devices/etm<N>/sshot_status Date: December 2019 KernelVersion: 5.5 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Print the current value of the selected single shot +Description: (Read) Print the current value of the selected single shot status register. What: /sys/bus/coresight/devices/etm<N>/sshot_pe_ctrl @@ -333,111 +333,111 @@ What: /sys/bus/coresight/devices/etm<N>/mgmt/trcoslsr Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Print the content of the OS Lock Status Register (0x304). +Description: (Read) Print the content of the OS Lock Status Register (0x304). The value it taken directly from the HW. What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpdcr Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Print the content of the Power Down Control Register +Description: (Read) Print the content of the Power Down Control Register (0x310). The value is taken directly from the HW. What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpdsr Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Print the content of the Power Down Status Register +Description: (Read) Print the content of the Power Down Status Register (0x314). The value is taken directly from the HW. What: /sys/bus/coresight/devices/etm<N>/mgmt/trclsr Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Print the content of the SW Lock Status Register +Description: (Read) Print the content of the SW Lock Status Register (0xFB4). The value is taken directly from the HW. What: /sys/bus/coresight/devices/etm<N>/mgmt/trcauthstatus Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Print the content of the Authentication Status Register +Description: (Read) Print the content of the Authentication Status Register (0xFB8). The value is taken directly from the HW. What: /sys/bus/coresight/devices/etm<N>/mgmt/trcdevid Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Print the content of the Device ID Register +Description: (Read) Print the content of the Device ID Register (0xFC8). The value is taken directly from the HW. What: /sys/bus/coresight/devices/etm<N>/mgmt/trcdevtype Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Print the content of the Device Type Register +Description: (Read) Print the content of the Device Type Register (0xFCC). The value is taken directly from the HW. What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpidr0 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Print the content of the Peripheral ID0 Register +Description: (Read) Print the content of the Peripheral ID0 Register (0xFE0). The value is taken directly from the HW. What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpidr1 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Print the content of the Peripheral ID1 Register +Description: (Read) Print the content of the Peripheral ID1 Register (0xFE4). The value is taken directly from the HW. What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpidr2 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Print the content of the Peripheral ID2 Register +Description: (Read) Print the content of the Peripheral ID2 Register (0xFE8). The value is taken directly from the HW. What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpidr3 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Print the content of the Peripheral ID3 Register +Description: (Read) Print the content of the Peripheral ID3 Register (0xFEC). The value is taken directly from the HW. What: /sys/bus/coresight/devices/etm<N>/mgmt/trcconfig Date: February 2016 KernelVersion: 4.07 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Print the content of the trace configuration register +Description: (Read) Print the content of the trace configuration register (0x010) as currently set by SW. What: /sys/bus/coresight/devices/etm<N>/mgmt/trctraceid Date: February 2016 KernelVersion: 4.07 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Print the content of the trace ID register (0x040). +Description: (Read) Print the content of the trace ID register (0x040). What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr0 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Returns the tracing capabilities of the trace unit (0x1E0). +Description: (Read) Returns the tracing capabilities of the trace unit (0x1E0). The value is taken directly from the HW. What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr1 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Returns the tracing capabilities of the trace unit (0x1E4). +Description: (Read) Returns the tracing capabilities of the trace unit (0x1E4). The value is taken directly from the HW. What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr2 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Returns the maximum size of the data value, data address, +Description: (Read) Returns the maximum size of the data value, data address, VMID, context ID and instuction address in the trace unit (0x1E8). The value is taken directly from the HW. @@ -445,7 +445,7 @@ What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr3 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Returns the value associated with various resources +Description: (Read) Returns the value associated with various resources available to the trace unit. See the Trace Macrocell architecture specification for more details (0x1E8). The value is taken directly from the HW. @@ -454,42 +454,42 @@ What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr4 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Returns how many resources the trace unit supports (0x1F0). +Description: (Read) Returns how many resources the trace unit supports (0x1F0). The value is taken directly from the HW. What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr5 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Returns how many resources the trace unit supports (0x1F4). +Description: (Read) Returns how many resources the trace unit supports (0x1F4). The value is taken directly from the HW. What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr8 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Returns the maximum speculation depth of the instruction +Description: (Read) Returns the maximum speculation depth of the instruction trace stream. (0x180). The value is taken directly from the HW. What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr9 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Returns the number of P0 right-hand keys that the trace unit +Description: (Read) Returns the number of P0 right-hand keys that the trace unit can use (0x184). The value is taken directly from the HW. What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr10 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Returns the number of P1 right-hand keys that the trace unit +Description: (Read) Returns the number of P1 right-hand keys that the trace unit can use (0x188). The value is taken directly from the HW. What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr11 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Returns the number of special P1 right-hand keys that the +Description: (Read) Returns the number of special P1 right-hand keys that the trace unit can use (0x18C). The value is taken directly from the HW. @@ -497,7 +497,7 @@ What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr12 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Returns the number of conditional P1 right-hand keys that +Description: (Read) Returns the number of conditional P1 right-hand keys that the trace unit can use (0x190). The value is taken directly from the HW. @@ -505,6 +505,6 @@ What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr13 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Returns the number of special conditional P1 right-hand keys +Description: (Read) Returns the number of special conditional P1 right-hand keys that the trace unit can use (0x194). The value is taken directly from the HW. diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-stm b/Documentation/ABI/testing/sysfs-bus-coresight-devices-stm index 1dffabe7f48d..53e1f4815d64 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-stm +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-stm @@ -42,7 +42,7 @@ What: /sys/bus/coresight/devices/<memory_map>.stm/status Date: April 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) List various control and status registers. The specific +Description: (Read) List various control and status registers. The specific layout and content is driver specific. What: /sys/bus/coresight/devices/<memory_map>.stm/traceid diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc index ab49b9ac3bcb..6aa527296c71 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc @@ -11,21 +11,21 @@ What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rsz Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Defines the size, in 32-bit words, of the local RAM buffer. +Description: (Read) Defines the size, in 32-bit words, of the local RAM buffer. The value is read directly from HW register RSZ, 0x004. What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/sts Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Shows the value held by the TMC status register. The value +Description: (Read) Shows the value held by the TMC status register. The value is read directly from HW register STS, 0x00C. What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rrp Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Shows the value held by the TMC RAM Read Pointer register +Description: (Read) Shows the value held by the TMC RAM Read Pointer register that is used to read entries from the Trace RAM over the APB interface. The value is read directly from HW register RRP, 0x014. @@ -34,7 +34,7 @@ What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rwp Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Shows the value held by the TMC RAM Write Pointer register +Description: (Read) Shows the value held by the TMC RAM Write Pointer register that is used to sets the write pointer to write entries from the CoreSight bus into the Trace RAM. The value is read directly from HW register RWP, 0x018. @@ -43,21 +43,21 @@ What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/trg Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Similar to "trigger_cntr" above except that this value is +Description: (Read) Similar to "trigger_cntr" above except that this value is read directly from HW register TRG, 0x01C. What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ctl Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Shows the value held by the TMC Control register. The value +Description: (Read) Shows the value held by the TMC Control register. The value is read directly from HW register CTL, 0x020. What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ffsr Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Shows the value held by the TMC Formatter and Flush Status +Description: (Read) Shows the value held by the TMC Formatter and Flush Status register. The value is read directly from HW register FFSR, 0x300. @@ -65,7 +65,7 @@ What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ffcr Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Shows the value held by the TMC Formatter and Flush Control +Description: (Read) Shows the value held by the TMC Formatter and Flush Control register. The value is read directly from HW register FFCR, 0x304. @@ -73,7 +73,7 @@ What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/mode Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Shows the value held by the TMC Mode register, which +Description: (Read) Shows the value held by the TMC Mode register, which indicate the mode the device has been configured to enact. The The value is read directly from the MODE register, 0x028. @@ -81,7 +81,7 @@ What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/devid Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) Indicates the capabilities of the Coresight TMC. +Description: (Read) Indicates the capabilities of the Coresight TMC. The value is read directly from the DEVID register, 0xFC8, What: /sys/bus/coresight/devices/<memory_map>.tmc/buffer_size diff --git a/Documentation/ABI/testing/sysfs-bus-css b/Documentation/ABI/testing/sysfs-bus-css index 966f8504bd7b..12a733fe357f 100644 --- a/Documentation/ABI/testing/sysfs-bus-css +++ b/Documentation/ABI/testing/sysfs-bus-css @@ -20,6 +20,7 @@ Contact: Cornelia Huck <cornelia.huck@de.ibm.com> Description: Contains the ids of the channel paths used by this subchannel, as reported by the channel subsystem during subchannel recognition. + Note: This is an I/O-subchannel specific attribute. Users: s390-tools, HAL @@ -31,6 +32,7 @@ Description: Contains the PIM/PAM/POM values, as reported by the channel subsystem when last queried by the common I/O layer (this implies that this attribute is not necessarily in sync with the values current in the channel subsystem). + Note: This is an I/O-subchannel specific attribute. Users: s390-tools, HAL @@ -53,6 +55,7 @@ Description: This file allows the driver for a device to be specified. When opt-out of driver binding using a driver_override name such as "none". Only a single driver may be specified in the override, there is no support for parsing delimiters. + Note that unlike the mechanism of the same name for pci, this file does not allow to override basic matching rules. I.e., the driver must still match the subchannel type of the device. diff --git a/Documentation/ABI/testing/sysfs-bus-dfl b/Documentation/ABI/testing/sysfs-bus-dfl index 23543be904f2..b0265ab17200 100644 --- a/Documentation/ABI/testing/sysfs-bus-dfl +++ b/Documentation/ABI/testing/sysfs-bus-dfl @@ -4,6 +4,7 @@ KernelVersion: 5.10 Contact: Xu Yilun <yilun.xu@intel.com> Description: Read-only. It returns type of DFL FIU of the device. Now DFL supports 2 FIU types, 0 for FME, 1 for PORT. + Format: 0x%x What: /sys/bus/dfl/devices/dfl_dev.X/feature_id @@ -12,4 +13,5 @@ KernelVersion: 5.10 Contact: Xu Yilun <yilun.xu@intel.com> Description: Read-only. It returns feature identifier local to its DFL FIU type. + Format: 0x%x diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme b/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme index c9278a3b3df1..63a32ddcb95e 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme @@ -8,13 +8,13 @@ Description: Read-only. Attribute group to describe the magic bits Each attribute under this group defines a bit range of the perf_event_attr.config. All supported attributes are listed - below. + below:: event = "config:0-11" - event ID evtype = "config:12-15" - event type portid = "config:16-23" - event source - For example, + For example:: fab_mmio_read = "event=0x06,evtype=0x02,portid=0xff" @@ -40,11 +40,11 @@ Description: Read-only. Attribute group to describe performance monitoring All supported performance monitoring events are listed below. - Basic events (evtype=0x00) + Basic events (evtype=0x00):: clock = "event=0x00,evtype=0x00,portid=0xff" - Cache events (evtype=0x01) + Cache events (evtype=0x01):: cache_read_hit = "event=0x00,evtype=0x01,portid=0xff" cache_read_miss = "event=0x01,evtype=0x01,portid=0xff" @@ -59,7 +59,7 @@ Description: Read-only. Attribute group to describe performance monitoring cache_rx_req_stall = "event=0x09,evtype=0x01,portid=0xff" cache_eviction = "event=0x0a,evtype=0x01,portid=0xff" - Fabric events (evtype=0x02) + Fabric events (evtype=0x02):: fab_pcie0_read = "event=0x00,evtype=0x02,portid=0xff" fab_pcie0_write = "event=0x01,evtype=0x02,portid=0xff" @@ -78,7 +78,7 @@ Description: Read-only. Attribute group to describe performance monitoring fab_port_mmio_read = "event=0x06,evtype=0x02,portid=?" fab_port_mmio_write = "event=0x07,evtype=0x02,portid=?" - VTD events (evtype=0x03) + VTD events (evtype=0x03):: vtd_port_read_transaction = "event=0x00,evtype=0x03,portid=?" vtd_port_write_transaction = "event=0x01,evtype=0x03,portid=?" @@ -88,7 +88,7 @@ Description: Read-only. Attribute group to describe performance monitoring vtd_port_devtlb_2m_fill = "event=0x05,evtype=0x03,portid=?" vtd_port_devtlb_1g_fill = "event=0x06,evtype=0x03,portid=?" - VTD SIP events (evtype=0x04) + VTD SIP events (evtype=0x04):: vtd_sip_iotlb_4k_hit = "event=0x00,evtype=0x04,portid=0xff" vtd_sip_iotlb_2m_hit = "event=0x01,evtype=0x04,portid=0xff" diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-format b/Documentation/ABI/testing/sysfs-bus-event_source-devices-format index 5bb793ec926c..df7ccc1b2fba 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-format +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-format @@ -10,7 +10,8 @@ Description: name/value pairs. Userspace must be prepared for the possibility that attributes - define overlapping bit ranges. For example: + define overlapping bit ranges. For example:: + attr1 = 'config:0-23' attr2 = 'config:0-7' attr3 = 'config:12-35' diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 index 2273627df190..de390a010af8 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 @@ -7,7 +7,7 @@ Description: Read-only. Attribute group to describe the magic bits Each attribute under this group defines a bit range of the perf_event_attr.config. All supported attributes are listed - below. + below:: chip = "config:16-31" core = "config:16-31" @@ -16,9 +16,9 @@ Description: Read-only. Attribute group to describe the magic bits offset = "config:32-63" vcpu = "config:16-31" - For example, + For example:: - PM_PB_CYC = "domain=1,offset=0x80,chip=?,lpar=0x0" + PM_PB_CYC = "domain=1,offset=0x80,chip=?,lpar=0x0" In this event, '?' after chip specifies that this value will be provided by user while running this event. diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci index 6a023b42486c..12e2bf92783f 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci @@ -7,7 +7,7 @@ Description: Read-only. Attribute group to describe the magic bits Each attribute under this group defines a bit range of the perf_event_attr.config. All supported attributes are listed - below. + below:: counter_info_version = "config:16-23" length = "config:24-31" @@ -20,9 +20,9 @@ Description: Read-only. Attribute group to describe the magic bits secondary_index = "config:0-15" starting_index = "config:32-63" - For example, + For example:: - processor_core_utilization_instructions_completed = "request=0x94, + processor_core_utilization_instructions_completed = "request=0x94, phys_processor_idx=?,counter_info_version=0x8, length=8,offset=0x18" @@ -36,6 +36,7 @@ Description: '0' if the hypervisor is configured to forbid access to event counters being accumulated by other guests and to physical domain event counters. + '1' if that access is allowed. What: /sys/bus/event_source/devices/hv_gpci/interface/ga diff --git a/Documentation/ABI/testing/sysfs-bus-fcoe b/Documentation/ABI/testing/sysfs-bus-fcoe index 657df13b100d..8fe787cc4ab7 100644 --- a/Documentation/ABI/testing/sysfs-bus-fcoe +++ b/Documentation/ABI/testing/sysfs-bus-fcoe @@ -3,16 +3,19 @@ Date: August 2012 KernelVersion: TBD Contact: Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org Description: The FCoE bus. Attributes in this directory are control interfaces. + Attributes: - ctlr_create: 'FCoE Controller' instance creation interface. Writing an + ctlr_create: + 'FCoE Controller' instance creation interface. Writing an <ifname> to this file will allocate and populate sysfs with a fcoe_ctlr_device (ctlr_X). The user can then configure any per-port settings and finally write to the fcoe_ctlr_device's 'start' attribute to begin the kernel's discovery and login process. - ctlr_destroy: 'FCoE Controller' instance removal interface. Writing a + ctlr_destroy: + 'FCoE Controller' instance removal interface. Writing a fcoe_ctlr_device's sysfs name to this file will log the fcoe_ctlr_device out of the fabric or otherwise connected FCoE devices. It will also free all kernel memory allocated @@ -32,11 +35,13 @@ Description: 'FCoE Controller' instances on the fcoe bus. Attributes: - fcf_dev_loss_tmo: Device loss timeout period (see below). Changing + fcf_dev_loss_tmo: + Device loss timeout period (see below). Changing this value will change the dev_loss_tmo for all FCFs discovered by this controller. - mode: Display or change the FCoE Controller's mode. Possible + mode: + Display or change the FCoE Controller's mode. Possible modes are 'Fabric' and 'VN2VN'. If a FCoE Controller is started in 'Fabric' mode then FIP FCF discovery is initiated and ultimately a fabric login is attempted. @@ -44,23 +49,30 @@ Attributes: FIP VN2VN discovery and login is performed. A FCoE Controller only supports one mode at a time. - enabled: Whether an FCoE controller is enabled or disabled. + enabled: + Whether an FCoE controller is enabled or disabled. 0 if disabled, 1 if enabled. Writing either 0 or 1 to this file will enable or disable the FCoE controller. - lesb/link_fail: Link Error Status Block (LESB) link failure count. + lesb/link_fail: + Link Error Status Block (LESB) link failure count. - lesb/vlink_fail: Link Error Status Block (LESB) virtual link + lesb/vlink_fail: + Link Error Status Block (LESB) virtual link failure count. - lesb/miss_fka: Link Error Status Block (LESB) missed FCoE + lesb/miss_fka: + Link Error Status Block (LESB) missed FCoE Initialization Protocol (FIP) Keep-Alives (FKA). - lesb/symb_err: Link Error Status Block (LESB) symbolic error count. + lesb/symb_err: + Link Error Status Block (LESB) symbolic error count. - lesb/err_block: Link Error Status Block (LESB) block error count. + lesb/err_block: + Link Error Status Block (LESB) block error count. - lesb/fcs_error: Link Error Status Block (LESB) Fibre Channel + lesb/fcs_error: + Link Error Status Block (LESB) Fibre Channel Services error count. Notes: ctlr_X (global increment starting at 0) @@ -75,31 +87,41 @@ Description: 'FCoE FCF' instances on the fcoe bus. A FCF is a Fibre Channel Fibre Channel frames into a FC fabric. It can also take outbound FC frames and pack them in Ethernet packets to be sent to their destination on the Ethernet segment. + Attributes: - fabric_name: Identifies the fabric that the FCF services. + fabric_name: + Identifies the fabric that the FCF services. - switch_name: Identifies the FCF. + switch_name: + Identifies the FCF. - priority: The switch's priority amongst other FCFs on the same + priority: + The switch's priority amongst other FCFs on the same fabric. - selected: 1 indicates that the switch has been selected for use; + selected: + 1 indicates that the switch has been selected for use; 0 indicates that the switch will not be used. - fc_map: The Fibre Channel MAP + fc_map: + The Fibre Channel MAP - vfid: The Virtual Fabric ID + vfid: + The Virtual Fabric ID - mac: The FCF's MAC address + mac: + The FCF's MAC address - fka_period: The FIP Keep-Alive period + fka_period: + The FIP Keep-Alive period fabric_state: The internal kernel state - "Unknown" - Initialization value - "Disconnected" - No link to the FCF/fabric - "Connected" - Host is connected to the FCF - "Deleted" - FCF is being removed from the system + + - "Unknown" - Initialization value + - "Disconnected" - No link to the FCF/fabric + - "Connected" - Host is connected to the FCF + - "Deleted" - FCF is being removed from the system dev_loss_tmo: The device loss timeout period for this FCF. diff --git a/Documentation/ABI/testing/sysfs-bus-fsl-mc b/Documentation/ABI/testing/sysfs-bus-fsl-mc index 80256b8b4f26..bf3c6af6ad89 100644 --- a/Documentation/ABI/testing/sysfs-bus-fsl-mc +++ b/Documentation/ABI/testing/sysfs-bus-fsl-mc @@ -6,8 +6,10 @@ Description: the driver to attempt to bind to the device found at this location. The format for the location is Object.Id and is the same as found in /sys/bus/fsl-mc/devices/. - For example: - # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/bind + + For example:: + + # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/bind What: /sys/bus/fsl-mc/drivers/.../unbind Date: December 2016 @@ -17,5 +19,7 @@ Description: driver to attempt to unbind from the device found at this location. The format for the location is Object.Id and is the same as found in /sys/bus/fsl-mc/devices/. - For example: - # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/unbind + + For example:: + + # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/unbind diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480 b/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480 index 9de269bb0ae5..42dfc9399d2d 100644 --- a/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480 +++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480 @@ -3,19 +3,25 @@ Date: February 2011 Contact: Minkyu Kang <mk7.kang@samsung.com> Description: show what device is attached - NONE - no device - USB - USB device is attached - UART - UART is attached - CHARGER - Charger is attaced - JIG - JIG is attached + + ======= ====================== + NONE no device + USB USB device is attached + UART UART is attached + CHARGER Charger is attaced + JIG JIG is attached + ======= ====================== What: /sys/bus/i2c/devices/.../switch Date: February 2011 Contact: Minkyu Kang <mk7.kang@samsung.com> Description: show or set the state of manual switch - VAUDIO - switch to VAUDIO path - UART - switch to UART path - AUDIO - switch to AUDIO path - DHOST - switch to DHOST path - AUTO - switch automatically by device + + ======= ============================== + VAUDIO switch to VAUDIO path + UART switch to UART path + AUDIO switch to AUDIO path + DHOST switch to DHOST path + AUTO switch automatically by device + ======= ============================== diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-pca954x b/Documentation/ABI/testing/sysfs-bus-i2c-devices-pca954x index 0b0de8cd0d13..b6c69eb80ca4 100644 --- a/Documentation/ABI/testing/sysfs-bus-i2c-devices-pca954x +++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-pca954x @@ -6,15 +6,18 @@ Description: Value that exists only for mux devices that can be written to control the behaviour of the multiplexer on idle. Possible values: - -2 - disconnect on idle, i.e. deselect the last used - channel, which is useful when there is a device - with an address that conflicts with another - device on another mux on the same parent bus. - -1 - leave the mux as-is, which is the most optimal - setting in terms of I2C operations and is the - default mode. - 0..<nchans> - set the mux to a predetermined channel, - which is useful if there is one channel that is - used almost always, and you want to reduce the - latency for normal operations after rare - transactions on other channels + + =========== =============================================== + -2 disconnect on idle, i.e. deselect the last used + channel, which is useful when there is a device + with an address that conflicts with another + device on another mux on the same parent bus. + -1 leave the mux as-is, which is the most optimal + setting in terms of I2C operations and is the + default mode. + 0..<nchans> set the mux to a predetermined channel, + which is useful if there is one channel that is + used almost always, and you want to reduce the + latency for normal operations after rare + transactions on other channels + =========== =============================================== diff --git a/Documentation/ABI/testing/sysfs-bus-i3c b/Documentation/ABI/testing/sysfs-bus-i3c index 2f332ec36f82..1f4a2662335b 100644 --- a/Documentation/ABI/testing/sysfs-bus-i3c +++ b/Documentation/ABI/testing/sysfs-bus-i3c @@ -84,6 +84,7 @@ Description: by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl". See the I3C specification for more details about these HDR modes. + This entry describes the HDRCAP of the master controller driving the bus. @@ -135,6 +136,7 @@ Description: Expose the HDR (High Data Rate) capabilities of a device. Returns a list of supported HDR mode, each element is separated by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl". + See the I3C specification for more details about these HDR modes. diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index a9d51810a3ba..df42bed09f25 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -15,6 +15,7 @@ Description: based on hardware generated events (e.g. data ready) or provided by a separate driver for other hardware (e.g. periodic timer, GPIO or high resolution timer). + Contains trigger type specific elements. These do not generalize well and hence are not documented in this file. X is the IIO index of the trigger. @@ -65,6 +66,7 @@ Contact: linux-iio@vger.kernel.org Description: When the internal sampling clock can only take a specific set of frequencies, we can specify the available values with: + - a small discrete set of values like "0 2 4 6 8" - a range with minimum, step and maximum frequencies like "[min step max]" @@ -665,6 +667,7 @@ Description: <type>[Y][_name]_<raw|input>_thresh_falling_value may take different values, but the device can only enable both thresholds or neither. + Note the driver will assume the last p events requested are to be enabled where p is how many it supports (which may vary depending on the exact set requested. So if you want to be @@ -719,6 +722,7 @@ Description: <type>[Y][_name]_<raw|input>_roc_falling_value may take different values, but the device can only enable both rate of change thresholds or neither. + Note the driver will assume the last p events requested are to be enabled where p is however many it supports (which may vary depending on the exact set requested. So if you want to be @@ -774,9 +778,11 @@ Description: Specifies the value of threshold that the device is comparing against for the events enabled by <type>Y[_name]_thresh[_rising|falling]_en. + If separate attributes exist for the two directions, but direction is not specified for this attribute, then a single threshold value applies to both directions. + The raw or input element of the name indicates whether the value is in raw device units or in processed units (as _raw and _input do on sysfs direct channel read attributes). @@ -859,6 +865,7 @@ Description: If separate attributes exist for the two directions, but direction is not specified for this attribute, then a single hysteresis value applies to both directions. + For falling events the hysteresis is added to the _value attribute for this event to get the upper threshold for when the event goes back to normal, for rising events the hysteresis is subtracted from the _value @@ -905,6 +912,7 @@ Description: Specifies the value of rate of change threshold that the device is comparing against for the events enabled by <type>[Y][_name]_roc[_rising|falling]_en. + If separate attributes exist for the two directions, but direction is not specified for this attribute, then a single threshold value applies to both directions. @@ -1304,6 +1312,7 @@ Description: Proximity measurement indicating that some object is near the sensor, usually by observing reflectivity of infrared or ultrasound emitted. + Often these sensors are unit less and as such conversion to SI units is not possible. Higher proximity measurements indicate closer objects, and vice versa. Units after @@ -1449,9 +1458,12 @@ Contact: linux-iio@vger.kernel.org Description: A single positive integer specifying the maximum number of scan elements to wait for. + Poll will block until the watermark is reached. + Blocking read will wait until the minimum between the requested read amount or the low water mark is available. + Non-blocking read will retrieve the available samples from the buffer even if there are less samples then watermark level. This allows the application to block on poll with a timeout and read @@ -1480,11 +1492,13 @@ Description: device settings allows it (e.g. if a trigger is set that samples data differently that the hardware fifo does then hardware fifo will not enabled). + If the hardware fifo is enabled and the level of the hardware fifo reaches the hardware fifo watermark level the device will flush its hardware fifo to the device buffer. Doing a non blocking read on the device when no samples are present in the device buffer will also force a flush. + When the hardware fifo is enabled there is no need to use a trigger to use buffer mode since the watermark settings guarantees that the hardware fifo is flushed to the device @@ -1522,6 +1536,7 @@ Description: A single positive integer specifying the minimum watermark level for the hardware fifo of this device. If the device does not have a hardware fifo this entry is not present. + If the user sets buffer/watermark to a value less than this one, then the hardware watermark will remain unset. @@ -1532,6 +1547,7 @@ Description: A single positive integer specifying the maximum watermark level for the hardware fifo of this device. If the device does not have a hardware fifo this entry is not present. + If the user sets buffer/watermark to a value greater than this one, then the hardware watermark will be capped at this value. @@ -1543,6 +1559,7 @@ Description: levels for the hardware fifo. This entry is optional and if it is not present it means that all the values between hwfifo_watermark_min and hwfifo_watermark_max are supported. + If the user sets buffer/watermark to a value greater than hwfifo_watermak_min but not equal to any of the values in this list, the driver will chose an appropriate value for the @@ -1604,7 +1621,8 @@ KernelVersion: 4.1.0 Contact: linux-iio@vger.kernel.org Description: '1' (enable) or '0' (disable) specifying the enable - of heater function. Same reading values apply + of heater function. Same reading values apply. + This ABI is especially applicable for humidity sensors to heatup the device and get rid of any condensation in some humidity environment @@ -1627,17 +1645,21 @@ Description: Mounting matrix for IIO sensors. This is a rotation matrix which informs userspace about sensor chip's placement relative to the main hardware it is mounted on. + Main hardware placement is defined according to the local reference frame related to the physical quantity the sensor measures. + Given that the rotation matrix is defined in a board specific way (platform data and / or device-tree), the main hardware reference frame definition is left to the implementor's choice (see below for a magnetometer example). + Applications should apply this rotation matrix to samples so that when main hardware reference frame is aligned onto local reference frame, then sensor chip reference frame is also perfectly aligned with it. + Matrix is a 3x3 unitary matrix and typically looks like [0, 1, 0; 1, 0, 0; 0, 0, -1]. Identity matrix [1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and main hardware @@ -1646,8 +1668,10 @@ Description: For example, a mounting matrix for a magnetometer sensor informs userspace about sensor chip's ORIENTATION relative to the main hardware. + More specifically, main hardware orientation is defined with respect to the LOCAL EARTH GEOMAGNETIC REFERENCE FRAME where : + * Y is in the ground plane and positive towards magnetic North ; * X is in the ground plane, perpendicular to the North axis and positive towards the East ; @@ -1656,13 +1680,16 @@ Description: An implementor might consider that for a hand-held device, a 'natural' orientation would be 'front facing camera at the top'. The main hardware reference frame could then be described as : + * Y is in the plane of the screen and is positive towards the top of the screen ; * X is in the plane of the screen, perpendicular to Y axis, and positive towards the right hand side of the screen ; * Z is perpendicular to the screen plane and positive out of the screen. + Another example for a quadrotor UAV might be : + * Y is in the plane of the propellers and positive towards the front-view camera; * X is in the plane of the propellers, perpendicular to Y axis, @@ -1704,6 +1731,7 @@ Description: This interface is deprecated; please use the Counter subsystem. A list of possible counting directions which are: + - "up" : counter device is increasing. - "down": counter device is decreasing. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector b/Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector index 2071f9bcfaa5..1c2a07f7a75e 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector @@ -5,7 +5,8 @@ Contact: Peter Rosin <peda@axentia.se> Description: The DAC is used to find the peak level of an alternating voltage input signal by a binary search using the output - of a comparator wired to an interrupt pin. Like so: + of a comparator wired to an interrupt pin. Like so:: + _ | \ input +------>-------|+ \ @@ -19,10 +20,12 @@ Description: | irq|------<-------' | | '-------' + The boolean invert attribute (0/1) should be set when the input signal is centered around the maximum value of the dac instead of zero. The envelope detector will search from below in this case and will also invert the result. + The edge/level of the interrupt is also switched to its opposite value. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435 b/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435 index f30b4c424fb6..4b01150af397 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435 +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435 @@ -19,9 +19,11 @@ Description: is separately set for "GND-Open" and "Supply-Open" modes. Channels 0..31 have common low threshold values, but could have different sensing_modes. + The low voltage threshold range is between 2..21V. Hysteresis between low and high thresholds can not be lower then 2 and can not be odd. + If falling threshold results hysteresis to odd value then rising threshold is automatically subtracted by one. @@ -34,10 +36,13 @@ Description: this value then the threshold rising event is pushed. Depending on in_voltageY_sensing_mode the high voltage threshold is separately set for "GND-Open" and "Supply-Open" modes. + Channels 0..31 have common high threshold values, but could have different sensing_modes. + The high voltage threshold range is between 3..22V. Hysteresis between low and high thresholds can not be lower then 2 and can not be odd. + If rising threshold results hysteresis to odd value then falling threshold is automatically appended by one. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 index efe4c85e3c8b..1975c7a1af34 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 @@ -5,10 +5,13 @@ Description: The STM32 ADC can be configured to use external trigger sources (e.g. timers, pwm or exti gpio). Then, it can be tuned to start conversions on external trigger by either: + - "rising-edge" - "falling-edge" - "both-edges". + Reading returns current trigger polarity. + Writing value before enabling conversions sets trigger polarity. What: /sys/bus/iio/devices/triggerX/trigger_polarity_available diff --git a/Documentation/ABI/testing/sysfs-bus-iio-cros-ec b/Documentation/ABI/testing/sysfs-bus-iio-cros-ec index 6158f831c761..adf24c40126f 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-cros-ec +++ b/Documentation/ABI/testing/sysfs-bus-iio-cros-ec @@ -4,7 +4,7 @@ KernelVersion: 4.7 Contact: linux-iio@vger.kernel.org Description: Writing '1' will perform a FOC (Fast Online Calibration). The - corresponding calibration offsets can be read from *_calibbias + corresponding calibration offsets can be read from `*_calibbias` entries. What: /sys/bus/iio/devices/iio:deviceX/location diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 index 0e66ae9b0071..91439d6d60b5 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 +++ b/Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 @@ -3,14 +3,20 @@ KernelVersion: 4.14 Contact: arnaud.pouliquen@st.com Description: For audio purpose only. + Used by audio driver to set/get the spi input frequency. + This is mandatory if DFSDM is slave on SPI bus, to provide information on the SPI clock frequency during runtime Notice that the SPI frequency should be a multiple of sample frequency to ensure the precision. - if DFSDM input is SPI master + + if DFSDM input is SPI master: + Reading SPI clkout frequency, error on writing + If DFSDM input is SPI Slave: + Reading returns value previously set. Writing value before starting conversions. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 index a133fd8d081a..40df5c9fef99 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 +++ b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 @@ -15,8 +15,11 @@ Description: first object echoed in meters. Default value is 6.020. This setting limits the time the driver is waiting for a echo. + Showing the range of available values is represented as the minimum value, the step and the maximum value, all enclosed in square brackets. - Example: - [0.043 0.043 11.008] + + Example:: + + [0.043 0.043 11.008] diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 index a91aeabe7b24..d065cda7dd96 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 +++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 @@ -8,7 +8,9 @@ KernelVersion: 3.4.0 Contact: linux-iio@vger.kernel.org Description: Reading returns either '1' or '0'. + '1' means that the clock in question is present. + '0' means that the clock is missing. What: /sys/bus/iio/devices/iio:deviceX/pllY_locked diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 index 302de64cb424..544548ee794c 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 +++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 @@ -27,12 +27,12 @@ What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_name KernelVersion: Contact: linux-iio@vger.kernel.org Description: - Reading returns the datasheet name for channel Y: + Reading returns the datasheet name for channel Y:: - out_altvoltage0_name: RF8x - out_altvoltage1_name: RFAUX8x - out_altvoltage2_name: RF16x - out_altvoltage3_name: RF32x + out_altvoltage0_name: RF8x + out_altvoltage1_name: RFAUX8x + out_altvoltage2_name: RF16x + out_altvoltage3_name: RF32x What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown KernelVersion: diff --git a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x index 6adba9058b22..66b621f10223 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x +++ b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x @@ -6,10 +6,14 @@ Description: Get measured values from the ADC for these stages. Y is the specific stage number corresponding to datasheet stage names as follows: - 1 -> LED2 - 2 -> ALED2/LED3 - 3 -> LED1 - 4 -> ALED1/LED4 + + == ========== + 1 LED2 + 2 ALED2/LED3 + 3 LED1 + 4 ALED1/LED4 + == ========== + Note that channels 5 and 6 represent LED2-ALED2 and LED1-ALED1 respectively which simply helper channels containing the calculated difference in the value of stage 1 - 2 and 3 - 4. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018 b/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018 index f0ce0a0476ea..220206a20d98 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018 +++ b/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018 @@ -15,5 +15,7 @@ Description: Scheme 0 has wider dynamic range, Scheme 1 proximity detection is less affected by the ambient IR noise variation. - 0 Sensing IR from LED and ambient - 1 Sensing IR from LED with ambient IR rejection + == ============================================= + 0 Sensing IR from LED and ambient + 1 Sensing IR from LED with ambient IR rejection + == ============================================= diff --git a/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 index ad2cc63e4bf8..73498ff666bd 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 +++ b/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 @@ -17,9 +17,11 @@ KernelVersion: 4.13 Contact: fabrice.gasnier@st.com Description: Configure the device counter quadrature modes: + - non-quadrature: Encoder IN1 input servers as the count input (up direction). + - quadrature: Encoder IN1 and IN2 inputs are mixed to get direction and count. @@ -35,23 +37,26 @@ KernelVersion: 4.13 Contact: fabrice.gasnier@st.com Description: Configure the device encoder/counter active edge: + - rising-edge - falling-edge - both-edges In non-quadrature mode, device counts up on active edge. + In quadrature mode, encoder counting scenarios are as follows: - ---------------------------------------------------------------- + + +---------+----------+--------------------+--------------------+ | Active | Level on | IN1 signal | IN2 signal | - | edge | opposite |------------------------------------------ + | edge | opposite +----------+---------+----------+---------+ | | signal | Rising | Falling | Rising | Falling | - ---------------------------------------------------------------- - | Rising | High -> | Down | - | Up | - | - | edge | Low -> | Up | - | Down | - | - ---------------------------------------------------------------- - | Falling | High -> | - | Up | - | Down | - | edge | Low -> | - | Down | - | Up | - ---------------------------------------------------------------- - | Both | High -> | Down | Up | Up | Down | - | edges | Low -> | Up | Down | Down | Up | - ---------------------------------------------------------------- + +---------+----------+----------+---------+----------+---------+ + | Rising | High -> | Down | - | Up | - | + | edge | Low -> | Up | - | Down | - | + +---------+----------+----------+---------+----------+---------+ + | Falling | High -> | - | Up | - | Down | + | edge | Low -> | - | Down | - | Up | + +---------+----------+----------+---------+----------+---------+ + | Both | High -> | Down | Up | Up | Down | + | edges | Low -> | Up | Down | Down | Up | + +---------+----------+----------+---------+----------+---------+ diff --git a/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843 b/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843 index 6275e9f56e6c..13f099ef6a95 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843 +++ b/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843 @@ -5,11 +5,16 @@ Contact: linux-iio@vger.kernel.org Description: Current configuration and available configurations for the bias current. - normal - Normal measurement configurations (default) - positivebias - Positive bias configuration - negativebias - Negative bias configuration - disabled - Only available on HMC5983. Disables magnetic + + ============ ============================================ + normal Normal measurement configurations (default) + positivebias Positive bias configuration + negativebias Negative bias configuration + disabled Only available on HMC5983. Disables magnetic sensor and enables temperature sensor. - Note: The effect of this configuration may vary - according to the device. For exact documentation - check the device's datasheet. + ============ ============================================ + + Note: + The effect of this configuration may vary + according to the device. For exact documentation + check the device's datasheet. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856 b/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856 index 3b3509a3ef2f..e5ef6d8e5da1 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856 +++ b/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856 @@ -5,9 +5,12 @@ Description: Open-circuit fault. The detection of open-circuit faults, such as those caused by broken thermocouple wires. Reading returns either '1' or '0'. - '1' = An open circuit such as broken thermocouple wires - has been detected. - '0' = No open circuit or broken thermocouple wires are detected + + === ======================================================= + '1' An open circuit such as broken thermocouple wires + has been detected. + '0' No open circuit or broken thermocouple wires are detected + === ======================================================= What: /sys/bus/iio/devices/iio:deviceX/fault_ovuv KernelVersion: 5.1 @@ -18,7 +21,11 @@ Description: cables by integrated MOSFETs at the T+ and T- inputs, and the BIAS output. These MOSFETs turn off when the input voltage is negative or greater than VDD. + Reading returns either '1' or '0'. - '1' = The input voltage is negative or greater than VDD. - '0' = The input voltage is positive and less than VDD (normal - state). + + === ======================================================= + '1' The input voltage is negative or greater than VDD. + '0' The input voltage is positive and less than VDD (normal + state). + === ======================================================= diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 index b7259234ad70..a10a4de3e5fe 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 +++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 @@ -3,67 +3,85 @@ KernelVersion: 4.11 Contact: benjamin.gaignard@st.com Description: Reading returns the list possible master modes which are: - - "reset" : The UG bit from the TIMx_EGR register is + + + - "reset" + The UG bit from the TIMx_EGR register is used as trigger output (TRGO). - - "enable" : The Counter Enable signal CNT_EN is used + - "enable" + The Counter Enable signal CNT_EN is used as trigger output. - - "update" : The update event is selected as trigger output. + - "update" + The update event is selected as trigger output. For instance a master timer can then be used as a prescaler for a slave timer. - - "compare_pulse" : The trigger output send a positive pulse - when the CC1IF flag is to be set. - - "OC1REF" : OC1REF signal is used as trigger output. - - "OC2REF" : OC2REF signal is used as trigger output. - - "OC3REF" : OC3REF signal is used as trigger output. - - "OC4REF" : OC4REF signal is used as trigger output. + - "compare_pulse" + The trigger output send a positive pulse + when the CC1IF flag is to be set. + - "OC1REF" + OC1REF signal is used as trigger output. + - "OC2REF" + OC2REF signal is used as trigger output. + - "OC3REF" + OC3REF signal is used as trigger output. + - "OC4REF" + OC4REF signal is used as trigger output. + Additional modes (on TRGO2 only): - - "OC5REF" : OC5REF signal is used as trigger output. - - "OC6REF" : OC6REF signal is used as trigger output. + + - "OC5REF" + OC5REF signal is used as trigger output. + - "OC6REF" + OC6REF signal is used as trigger output. - "compare_pulse_OC4REF": - OC4REF rising or falling edges generate pulses. + OC4REF rising or falling edges generate pulses. - "compare_pulse_OC6REF": - OC6REF rising or falling edges generate pulses. + OC6REF rising or falling edges generate pulses. - "compare_pulse_OC4REF_r_or_OC6REF_r": - OC4REF or OC6REF rising edges generate pulses. + OC4REF or OC6REF rising edges generate pulses. - "compare_pulse_OC4REF_r_or_OC6REF_f": - OC4REF rising or OC6REF falling edges generate pulses. + OC4REF rising or OC6REF falling edges generate + pulses. - "compare_pulse_OC5REF_r_or_OC6REF_r": - OC5REF or OC6REF rising edges generate pulses. + OC5REF or OC6REF rising edges generate pulses. - "compare_pulse_OC5REF_r_or_OC6REF_f": - OC5REF rising or OC6REF falling edges generate pulses. - - +-----------+ +-------------+ +---------+ - | Prescaler +-> | Counter | +-> | Master | TRGO(2) - +-----------+ +--+--------+-+ |-> | Control +--> - | | || +---------+ - +--v--------+-+ OCxREF || +---------+ - | Chx compare +----------> | Output | ChX - +-----------+-+ | | Control +--> - . | | +---------+ - . | | . - +-----------v-+ OC6REF | . - | Ch6 compare +---------+> - +-------------+ - - Example with: "compare_pulse_OC4REF_r_or_OC6REF_r": - - X - X X - X . . X - X . . X - X . . X - count X . . . . X - . . . . - . . . . - +---------------+ - OC4REF | . . | - +-+ . . +-+ - . +---+ . - OC6REF . | | . - +-------+ +-------+ - +-+ +-+ - TRGO2 | | | | - +-+ +---+ +---------+ + OC5REF rising or OC6REF falling edges generate + pulses. + + :: + + +-----------+ +-------------+ +---------+ + | Prescaler +-> | Counter | +-> | Master | TRGO(2) + +-----------+ +--+--------+-+ |-> | Control +--> + | | || +---------+ + +--v--------+-+ OCxREF || +---------+ + | Chx compare +----------> | Output | ChX + +-----------+-+ | | Control +--> + . | | +---------+ + . | | . + +-----------v-+ OC6REF | . + | Ch6 compare +---------+> + +-------------+ + + Example with: "compare_pulse_OC4REF_r_or_OC6REF_r":: + + X + X X + X . . X + X . . X + X . . X + count X . . . . X + . . . . + . . . . + +---------------+ + OC4REF | . . | + +-+ . . +-+ + . +---+ . + OC6REF . | | . + +-------+ +-------+ + +-+ +-+ + TRGO2 | | | | + +-+ +---+ +---------+ What: /sys/bus/iio/devices/triggerX/master_mode KernelVersion: 4.11 @@ -91,6 +109,30 @@ Description: When counting down the counter start from preset value and fire event when reach 0. +What: /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available +KernelVersion: 4.12 +Contact: benjamin.gaignard@st.com +Description: + Reading returns the list possible quadrature modes. + +What: /sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode +KernelVersion: 4.12 +Contact: benjamin.gaignard@st.com +Description: + Configure the device counter quadrature modes: + + channel_A: + Encoder A input servers as the count input and B as + the UP/DOWN direction control input. + + channel_B: + Encoder B input serves as the count input and A as + the UP/DOWN direction control input. + + quadrature: + Encoder A and B inputs are mixed to get direction + and count with a scale of 0.25. + What: /sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available KernelVersion: 4.12 Contact: benjamin.gaignard@st.com @@ -104,6 +146,7 @@ Description: Configure the device counter enable modes, in all case counting direction is set by in_count0_count_direction attribute and the counter is clocked by the internal clock. + always: Counter is always ON. diff --git a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth index 22d0843849a8..b7b2278fe042 100644 --- a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth +++ b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth @@ -10,10 +10,13 @@ Date: June 2015 KernelVersion: 4.3 Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> Description: (RO) Output port type: - 0: not present, - 1: MSU (Memory Storage Unit) - 2: CTP (Common Trace Port) - 4: PTI (MIPI PTI). + + == ========================= + 0 not present, + 1 MSU (Memory Storage Unit) + 2 CTP (Common Trace Port) + 4 PTI (MIPI PTI). + == ========================= What: /sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_drop Date: June 2015 diff --git a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc index 7fd2601c2831..a74252e580a5 100644 --- a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc +++ b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc @@ -9,11 +9,13 @@ Date: June 2015 KernelVersion: 4.3 Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> Description: (RW) Configure MSC operating mode: + - "single", for contiguous buffer mode (high-order alloc); - "multi", for multiblock mode; - "ExI", for DCI handler mode; - "debug", for debug mode; - any of the currently loaded buffer sinks. + If operating mode changes, existing buffer is deallocated, provided there are no active users and tracing is not enabled, otherwise the write will fail. @@ -23,10 +25,12 @@ Date: June 2015 KernelVersion: 4.3 Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> Description: (RW) Configure MSC buffer size for "single" or "multi" modes. + In single mode, this is a single number of pages, has to be power of 2. In multiblock mode, this is a comma-separated list of numbers of pages for each window to be allocated. Number of windows is not limited. + Writing to this file deallocates existing buffer (provided there are no active users and tracing is not enabled) and then allocates a new one. diff --git a/Documentation/ABI/testing/sysfs-bus-most b/Documentation/ABI/testing/sysfs-bus-most index ec0a603d804b..38cc03e408e7 100644 --- a/Documentation/ABI/testing/sysfs-bus-most +++ b/Documentation/ABI/testing/sysfs-bus-most @@ -235,7 +235,8 @@ KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> Description: This is to read back the configured direction of the channel. - The following strings will be accepted: + The following strings will be accepted:: + 'tx', 'rx' Users: @@ -246,7 +247,8 @@ KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> Description: This is to read back the configured data type of the channel. - The following strings will be accepted: + The following strings will be accepted:: + 'control', 'async', 'sync', diff --git a/Documentation/ABI/testing/sysfs-bus-moxtet-devices b/Documentation/ABI/testing/sysfs-bus-moxtet-devices index 355958527fa3..4a6d61b44f3f 100644 --- a/Documentation/ABI/testing/sysfs-bus-moxtet-devices +++ b/Documentation/ABI/testing/sysfs-bus-moxtet-devices @@ -2,16 +2,16 @@ What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_description Date: March 2019 KernelVersion: 5.3 Contact: Marek Behún <marek.behun@nic.cz> -Description: (R) Moxtet module description. Format: string +Description: (Read) Moxtet module description. Format: string What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_id Date: March 2019 KernelVersion: 5.3 Contact: Marek Behún <marek.behun@nic.cz> -Description: (R) Moxtet module ID. Format: %x +Description: (Read) Moxtet module ID. Format: %x What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_name Date: March 2019 KernelVersion: 5.3 Contact: Marek Behún <marek.behun@nic.cz> -Description: (R) Moxtet module name. Format: string +Description: (Read) Moxtet module name. Format: string diff --git a/Documentation/ABI/testing/sysfs-bus-nfit b/Documentation/ABI/testing/sysfs-bus-nfit index e4f76e7eab93..63ef0b9ecce7 100644 --- a/Documentation/ABI/testing/sysfs-bus-nfit +++ b/Documentation/ABI/testing/sysfs-bus-nfit @@ -1,4 +1,4 @@ -For all of the nmem device attributes under nfit/*, see the 'NVDIMM Firmware +For all of the nmem device attributes under ``nfit/*``, see the 'NVDIMM Firmware Interface Table (NFIT)' section in the ACPI specification (http://www.uefi.org/specifications) for more details. diff --git a/Documentation/ABI/testing/sysfs-bus-nvdimm b/Documentation/ABI/testing/sysfs-bus-nvdimm index d64380262be8..bff84a16812a 100644 --- a/Documentation/ABI/testing/sysfs-bus-nvdimm +++ b/Documentation/ABI/testing/sysfs-bus-nvdimm @@ -1,2 +1,8 @@ +What: nvdimm +Date: July 2020 +KernelVersion: 5.8 +Contact: Dan Williams <dan.j.williams@intel.com> +Description: + The libnvdimm sub-system implements a common sysfs interface for platform nvdimm resources. See Documentation/driver-api/nvdimm/. diff --git a/Documentation/ABI/testing/sysfs-bus-papr-pmem b/Documentation/ABI/testing/sysfs-bus-papr-pmem index c1a67275c43f..8316c33862a0 100644 --- a/Documentation/ABI/testing/sysfs-bus-papr-pmem +++ b/Documentation/ABI/testing/sysfs-bus-papr-pmem @@ -11,19 +11,26 @@ Description: at 'Documentation/powerpc/papr_hcalls.rst' . Below are the flags reported in this sysfs file: - * "not_armed" : Indicates that NVDIMM contents will not + * "not_armed" + Indicates that NVDIMM contents will not survive a power cycle. - * "flush_fail" : Indicates that NVDIMM contents + * "flush_fail" + Indicates that NVDIMM contents couldn't be flushed during last shut-down event. - * "restore_fail": Indicates that NVDIMM contents + * "restore_fail" + Indicates that NVDIMM contents couldn't be restored during NVDIMM initialization. - * "encrypted" : NVDIMM contents are encrypted. - * "smart_notify": There is health event for the NVDIMM. - * "scrubbed" : Indicating that contents of the + * "encrypted" + NVDIMM contents are encrypted. + * "smart_notify" + There is health event for the NVDIMM. + * "scrubbed" + Indicating that contents of the NVDIMM have been scrubbed. - * "locked" : Indicating that NVDIMM contents cant + * "locked" + Indicating that NVDIMM contents cant be modified until next power cycle. What: /sys/bus/nd/devices/nmemX/papr/perf_stats @@ -51,4 +58,4 @@ Description: * "MedWDur " : Media Write Duration * "CchRHCnt" : Cache Read Hit Count * "CchWHCnt" : Cache Write Hit Count - * "FastWCnt" : Fast Write Count
\ No newline at end of file + * "FastWCnt" : Fast Write Count diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index 450296cc7948..77ad9ec3c801 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -7,8 +7,10 @@ Description: this location. This is useful for overriding default bindings. The format for the location is: DDDD:BB:DD.F. That is Domain:Bus:Device.Function and is the same as - found in /sys/bus/pci/devices/. For example: - # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind + found in /sys/bus/pci/devices/. For example:: + + # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind + (Note: kernels before 2.6.28 may require echo -n). What: /sys/bus/pci/drivers/.../unbind @@ -20,8 +22,10 @@ Description: this location. This may be useful when overriding default bindings. The format for the location is: DDDD:BB:DD.F. That is Domain:Bus:Device.Function and is the same as - found in /sys/bus/pci/devices/. For example: - # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind + found in /sys/bus/pci/devices/. For example:: + + # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind + (Note: kernels before 2.6.28 may require echo -n). What: /sys/bus/pci/drivers/.../new_id @@ -38,8 +42,9 @@ Description: Class, Class Mask, and Private Driver Data. The Vendor ID and Device ID fields are required, the rest are optional. Upon successfully adding an ID, the driver will probe - for the device and attempt to bind to it. For example: - # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id + for the device and attempt to bind to it. For example:: + + # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id What: /sys/bus/pci/drivers/.../remove_id Date: February 2009 @@ -54,8 +59,9 @@ Description: required, the rest are optional. After successfully removing an ID, the driver will no longer support the device. This is useful to ensure auto probing won't - match the driver to the device. For example: - # echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id + match the driver to the device. For example:: + + # echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id What: /sys/bus/pci/rescan Date: January 2009 diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats index 3c9a8c4a25eb..860db53037a5 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats +++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats @@ -1,6 +1,6 @@ -========================== PCIe Device AER statistics -========================== +-------------------------- + These attributes show up under all the devices that are AER capable. These statistical counters indicate the errors "as seen/reported by the device". Note that this may mean that if an endpoint is causing problems, the AER @@ -17,19 +17,18 @@ Description: List of correctable errors seen and reported by this PCI device using ERR_COR. Note that since multiple errors may be reported using a single ERR_COR message, thus TOTAL_ERR_COR at the end of the file may not match the actual - total of all the errors in the file. Sample output: -------------------------------------------------------------------------- -localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_correctable -Receiver Error 2 -Bad TLP 0 -Bad DLLP 0 -RELAY_NUM Rollover 0 -Replay Timer Timeout 0 -Advisory Non-Fatal 0 -Corrected Internal Error 0 -Header Log Overflow 0 -TOTAL_ERR_COR 2 -------------------------------------------------------------------------- + total of all the errors in the file. Sample output:: + + localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_correctable + Receiver Error 2 + Bad TLP 0 + Bad DLLP 0 + RELAY_NUM Rollover 0 + Replay Timer Timeout 0 + Advisory Non-Fatal 0 + Corrected Internal Error 0 + Header Log Overflow 0 + TOTAL_ERR_COR 2 What: /sys/bus/pci/devices/<dev>/aer_dev_fatal Date: July 2018 @@ -39,28 +38,27 @@ Description: List of uncorrectable fatal errors seen and reported by this PCI device using ERR_FATAL. Note that since multiple errors may be reported using a single ERR_FATAL message, thus TOTAL_ERR_FATAL at the end of the file may not match the actual - total of all the errors in the file. Sample output: -------------------------------------------------------------------------- -localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_fatal -Undefined 0 -Data Link Protocol 0 -Surprise Down Error 0 -Poisoned TLP 0 -Flow Control Protocol 0 -Completion Timeout 0 -Completer Abort 0 -Unexpected Completion 0 -Receiver Overflow 0 -Malformed TLP 0 -ECRC 0 -Unsupported Request 0 -ACS Violation 0 -Uncorrectable Internal Error 0 -MC Blocked TLP 0 -AtomicOp Egress Blocked 0 -TLP Prefix Blocked Error 0 -TOTAL_ERR_FATAL 0 -------------------------------------------------------------------------- + total of all the errors in the file. Sample output:: + + localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_fatal + Undefined 0 + Data Link Protocol 0 + Surprise Down Error 0 + Poisoned TLP 0 + Flow Control Protocol 0 + Completion Timeout 0 + Completer Abort 0 + Unexpected Completion 0 + Receiver Overflow 0 + Malformed TLP 0 + ECRC 0 + Unsupported Request 0 + ACS Violation 0 + Uncorrectable Internal Error 0 + MC Blocked TLP 0 + AtomicOp Egress Blocked 0 + TLP Prefix Blocked Error 0 + TOTAL_ERR_FATAL 0 What: /sys/bus/pci/devices/<dev>/aer_dev_nonfatal Date: July 2018 @@ -70,32 +68,31 @@ Description: List of uncorrectable nonfatal errors seen and reported by this PCI device using ERR_NONFATAL. Note that since multiple errors may be reported using a single ERR_FATAL message, thus TOTAL_ERR_NONFATAL at the end of the file may not match the - actual total of all the errors in the file. Sample output: -------------------------------------------------------------------------- -localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_nonfatal -Undefined 0 -Data Link Protocol 0 -Surprise Down Error 0 -Poisoned TLP 0 -Flow Control Protocol 0 -Completion Timeout 0 -Completer Abort 0 -Unexpected Completion 0 -Receiver Overflow 0 -Malformed TLP 0 -ECRC 0 -Unsupported Request 0 -ACS Violation 0 -Uncorrectable Internal Error 0 -MC Blocked TLP 0 -AtomicOp Egress Blocked 0 -TLP Prefix Blocked Error 0 -TOTAL_ERR_NONFATAL 0 -------------------------------------------------------------------------- + actual total of all the errors in the file. Sample output:: + + localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_nonfatal + Undefined 0 + Data Link Protocol 0 + Surprise Down Error 0 + Poisoned TLP 0 + Flow Control Protocol 0 + Completion Timeout 0 + Completer Abort 0 + Unexpected Completion 0 + Receiver Overflow 0 + Malformed TLP 0 + ECRC 0 + Unsupported Request 0 + ACS Violation 0 + Uncorrectable Internal Error 0 + MC Blocked TLP 0 + AtomicOp Egress Blocked 0 + TLP Prefix Blocked Error 0 + TOTAL_ERR_NONFATAL 0 -============================ PCIe Rootport AER statistics -============================ +---------------------------- + These attributes show up under only the rootports (or root complex event collectors) that are AER capable. These indicate the number of error messages as "reported to" the rootport. Please note that the rootports also transmit diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt b/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt index 8a200f4eefbd..f85db86d63e8 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt +++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt @@ -4,6 +4,7 @@ Contact: Cezary Rojewski <cezary.rojewski@intel.com> Description: Version of AudioDSP firmware ASoC catpt driver is communicating with. + Format: %d.%d.%d.%d, type:major:minor:build. What: /sys/devices/pci0000:00/<dev>/fw_info diff --git a/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd b/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd index 60c60fa624b2..c90d97a80855 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd +++ b/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd @@ -21,11 +21,11 @@ Description: number returns the port to normal operation. For example: To force the high-speed device attached to - port 4 on bus 2 to run at full speed: + port 4 on bus 2 to run at full speed:: echo 4 >/sys/bus/usb/devices/usb2/../companion - To return the port to high-speed operation: + To return the port to high-speed operation:: echo -4 >/sys/bus/usb/devices/usb2/../companion diff --git a/Documentation/ABI/testing/sysfs-bus-rapidio b/Documentation/ABI/testing/sysfs-bus-rapidio index 13208b27dd87..634ea207a50a 100644 --- a/Documentation/ABI/testing/sysfs-bus-rapidio +++ b/Documentation/ABI/testing/sysfs-bus-rapidio @@ -4,24 +4,27 @@ Description: an individual subdirectory with the following name format of device_name "nn:d:iiii", where: - nn - two-digit hexadecimal ID of RapidIO network where the + ==== ======================================================== + nn two-digit hexadecimal ID of RapidIO network where the device resides - d - device type: 'e' - for endpoint or 's' - for switch - iiii - four-digit device destID for endpoints, or switchID for + d device type: 'e' - for endpoint or 's' - for switch + iiii four-digit device destID for endpoints, or switchID for switches + ==== ======================================================== For example, below is a list of device directories that represents a typical RapidIO network with one switch, one host, and two agent endpoints, as it is seen by the enumerating host - (with destID = 1): + (with destID = 1):: - /sys/bus/rapidio/devices/00:e:0000 - /sys/bus/rapidio/devices/00:e:0002 - /sys/bus/rapidio/devices/00:s:0001 + /sys/bus/rapidio/devices/00:e:0000 + /sys/bus/rapidio/devices/00:e:0002 + /sys/bus/rapidio/devices/00:s:0001 - NOTE: An enumerating or discovering endpoint does not create a - sysfs entry for itself, this is why an endpoint with destID=1 is - not shown in the list. + NOTE: + An enumerating or discovering endpoint does not create a + sysfs entry for itself, this is why an endpoint with destID=1 + is not shown in the list. Attributes Common for All RapidIO Devices ----------------------------------------- diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd index cc30bee8b5f4..417a2fe21be1 100644 --- a/Documentation/ABI/testing/sysfs-bus-rbd +++ b/Documentation/ABI/testing/sysfs-bus-rbd @@ -7,6 +7,8 @@ Description: Usage: <mon ip addr> <options> <pool name> <rbd image name> [<snap name>] + Example:: + $ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add The snapshot name can be "-" or omitted to map the image @@ -23,6 +25,8 @@ Description: Usage: <dev-id> [force] + Example:: + $ echo 2 > /sys/bus/rbd/remove Optional "force" argument which when passed will wait for @@ -80,26 +84,29 @@ Date: Oct, 2010 KernelVersion: v2.6.37 Contact: Sage Weil <sage@newdream.net> Description: - size: (RO) The size (in bytes) of the mapped block + + ============== ================================================ + size (RO) The size (in bytes) of the mapped block device. - major: (RO) The block device major number. + major (RO) The block device major number. - client_id: (RO) The ceph unique client id that was assigned + client_id (RO) The ceph unique client id that was assigned for this specific session. - pool: (RO) The name of the storage pool where this rbd + pool (RO) The name of the storage pool where this rbd image resides. An rbd image name is unique within its pool. - name: (RO) The name of the rbd image. + name (RO) The name of the rbd image. - refresh: (WO) Writing to this file will reread the image + refresh (WO) Writing to this file will reread the image header data and set all relevant data structures accordingly. - current_snap: (RO) The current snapshot for which the device + current_snap (RO) The current snapshot for which the device is mapped. + ============== ================================================ What: /sys/bus/rbd/devices/<dev-id>/pool_id @@ -117,11 +124,13 @@ Date: Oct, 2012 KernelVersion: v3.7 Contact: Sage Weil <sage@newdream.net> Description: - image_id: (RO) The unique id for the rbd image. (For rbd + ========= =============================================== + image_id (RO) The unique id for the rbd image. (For rbd image format 1 this is empty.) - features: (RO) A hexadecimal encoding of the feature bits + features (RO) A hexadecimal encoding of the feature bits for this image. + ========= =============================================== What: /sys/bus/rbd/devices/<dev-id>/parent @@ -149,14 +158,16 @@ Date: Aug, 2016 KernelVersion: v4.9 Contact: Sage Weil <sage@newdream.net> Description: - snap_id: (RO) The current snapshot's id. + ============ ================================================ + snap_id (RO) The current snapshot's id. - config_info: (RO) The string written into + config_info (RO) The string written into /sys/bus/rbd/add{,_single_major}. - cluster_fsid: (RO) The ceph cluster UUID. + cluster_fsid (RO) The ceph cluster UUID. - client_addr: (RO) The ceph unique client + client_addr (RO) The ceph unique client entity_addr_t (address + nonce). The format is <address>:<port>/<nonce>: '1.2.3.4:1234/5678' or '[1:2:3:4:5:6:7:8]:1234/5678'. + ============ ================================================ diff --git a/Documentation/ABI/testing/sysfs-bus-siox b/Documentation/ABI/testing/sysfs-bus-siox index c2a403f20b90..50e80238f30d 100644 --- a/Documentation/ABI/testing/sysfs-bus-siox +++ b/Documentation/ABI/testing/sysfs-bus-siox @@ -8,6 +8,7 @@ Description: When the file contains a "1" the bus is operated and periodically does a push-pull cycle to write and read data from the connected devices. + When writing a "0" or "1" the bus moves to the described state. What: /sys/bus/siox/devices/siox-X/device_add @@ -21,8 +22,10 @@ Description: to add a new device dynamically. <type> is the name that is used to match to a driver (similar to the platform bus). <inbytes> and <outbytes> define the length of the input and output shift register in bytes respectively. + <statustype> defines the 4 bit device type that is check to identify connection problems. + The new device is added to the end of the existing chain. What: /sys/bus/siox/devices/siox-X/device_remove diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt index dd565c378b40..0b4ab9e4b8f4 100644 --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt @@ -37,16 +37,18 @@ Contact: thunderbolt-software@lists.01.org Description: This attribute holds current Thunderbolt security level set by the system BIOS. Possible values are: - none: All devices are automatically authorized - user: Devices are only authorized based on writing - appropriate value to the authorized attribute - secure: Require devices that support secure connect at - minimum. User needs to authorize each device. - dponly: Automatically tunnel Display port (and USB). No - PCIe tunnels are created. - usbonly: Automatically tunnel USB controller of the + ======= ================================================== + none All devices are automatically authorized + user Devices are only authorized based on writing + appropriate value to the authorized attribute + secure Require devices that support secure connect at + minimum. User needs to authorize each device. + dponly Automatically tunnel Display port (and USB). No + PCIe tunnels are created. + usbonly Automatically tunnel USB controller of the connected Thunderbolt dock (and Display Port). All PCIe links downstream of the dock are removed. + ======= ================================================== What: /sys/bus/thunderbolt/devices/.../authorized Date: Sep 2017 @@ -61,17 +63,23 @@ Description: This attribute is used to authorize Thunderbolt devices yet authorized. Possible values are supported: - 1: The device will be authorized and connected + + == =========================================== + 1 The device will be authorized and connected + == =========================================== When key attribute contains 32 byte hex string the possible values are: - 1: The 32 byte hex string is added to the device NVM and - the device is authorized. - 2: Send a challenge based on the 32 byte hex string. If the - challenge response from device is valid, the device is - authorized. In case of failure errno will be ENOKEY if - the device did not contain a key at all, and - EKEYREJECTED if the challenge response did not match. + + == ======================================================== + 1 The 32 byte hex string is added to the device NVM and + the device is authorized. + 2 Send a challenge based on the 32 byte hex string. If the + challenge response from device is valid, the device is + authorized. In case of failure errno will be ENOKEY if + the device did not contain a key at all, and + EKEYREJECTED if the challenge response did not match. + == ======================================================== What: /sys/bus/thunderbolt/devices/.../boot Date: Jun 2018 @@ -185,10 +193,11 @@ Description: When new NVM image is written to the non-active NVM verification fails an error code is returned instead. This file will accept writing values "1" or "2" + - Writing "1" will flush the image to the storage - area and authenticate the image in one action. + area and authenticate the image in one action. - Writing "2" will run some basic validation on the image - and flush it to the storage area. + and flush it to the storage area. When read holds status of the last authentication operation if an error occurred during the process. This @@ -205,9 +214,11 @@ Description: This contains name of the property directory the XDomain question. Following directories are already reserved by the Apple XDomain specification: - network: IP/ethernet over Thunderbolt - targetdm: Target disk mode protocol over Thunderbolt - extdisp: External display mode protocol over Thunderbolt + ======== =============================================== + network IP/ethernet over Thunderbolt + targetdm Target disk mode protocol over Thunderbolt + extdisp External display mode protocol over Thunderbolt + ======== =============================================== What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/modalias Date: Jan 2018 @@ -285,7 +296,8 @@ Description: For supported devices, automatically authenticate the new Thunderbo image when the device is disconnected from the host system. This file will accept writing values "1" or "2" + - Writing "1" will flush the image to the storage - area and prepare the device for authentication on disconnect. + area and prepare the device for authentication on disconnect. - Writing "2" will run some basic validation on the image - and flush it to the storage area. + and flush it to the storage area. diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index 614d216dff1d..bf2c1968525f 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -9,6 +9,7 @@ Description: by writing INTERFACE to /sys/bus/usb/drivers_probe This allows to avoid side-effects with drivers that need multiple interfaces. + A deauthorized interface cannot be probed or claimed. What: /sys/bus/usb/devices/usbX/interface_authorized_default @@ -72,24 +73,27 @@ Description: table at compile time. The format for the device ID is: idVendor idProduct bInterfaceClass RefIdVendor RefIdProduct The vendor ID and device ID fields are required, the - rest is optional. The Ref* tuple can be used to tell the + rest is optional. The `Ref*` tuple can be used to tell the driver to use the same driver_data for the new device as it is used for the reference device. Upon successfully adding an ID, the driver will probe - for the device and attempt to bind to it. For example: - # echo "8086 10f5" > /sys/bus/usb/drivers/foo/new_id + for the device and attempt to bind to it. For example:: + + # echo "8086 10f5" > /sys/bus/usb/drivers/foo/new_id Here add a new device (0458:7045) using driver_data from - an already supported device (0458:704c): - # echo "0458 7045 0 0458 704c" > /sys/bus/usb/drivers/foo/new_id + an already supported device (0458:704c):: + + # echo "0458 7045 0 0458 704c" > /sys/bus/usb/drivers/foo/new_id Reading from this file will list all dynamically added device IDs in the same format, with one entry per - line. For example: - # cat /sys/bus/usb/drivers/foo/new_id - 8086 10f5 - dead beef 06 - f00d cafe + line. For example:: + + # cat /sys/bus/usb/drivers/foo/new_id + 8086 10f5 + dead beef 06 + f00d cafe The list will be truncated at PAGE_SIZE bytes due to sysfs restrictions. @@ -209,9 +213,11 @@ Description: advance, and behaves well according to the specification. This attribute is a bit-field that controls the behavior of a specific port: + - Bit 0 of this field selects the "old" enumeration scheme, as it is considerably faster (it only causes one USB reset instead of 2). + The old enumeration scheme can also be selected globally using /sys/module/usbcore/parameters/old_scheme_first, but it is often not desirable as the new scheme was introduced to @@ -233,10 +239,10 @@ Description: poll() for monitoring changes to this value in user space. Any time this value changes the corresponding hub device will send a - udev event with the following attributes: + udev event with the following attributes:: - OVER_CURRENT_PORT=/sys/bus/usb/devices/.../(hub interface)/portX - OVER_CURRENT_COUNT=[current value of this sysfs attribute] + OVER_CURRENT_PORT=/sys/bus/usb/devices/.../(hub interface)/portX + OVER_CURRENT_COUNT=[current value of this sysfs attribute] What: /sys/bus/usb/devices/.../(hub interface)/portX/usb3_lpm_permit Date: November 2015 diff --git a/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg b/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg index 9ade80f81f96..2f86e4223bfc 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg +++ b/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg @@ -12,8 +12,11 @@ KernelVersion: 2.6.26 Contact: Harrison Metzger <harrisonmetz@gmail.com> Description: Controls the devices display mode. For a 6 character display the values are + MSB 0x06; LSB 0x3F, and + for an 8 character display the values are + MSB 0x08; LSB 0xFF. What: /sys/bus/usb/.../textmode @@ -37,7 +40,7 @@ KernelVersion: 2.6.26 Contact: Harrison Metzger <harrisonmetz@gmail.com> Description: Controls the decimal places on the device. To set the nth decimal place, give this field - the value of 10 ** n. Assume this field has + the value of ``10 ** n``. Assume this field has the value k and has 1 or more decimal places set, to set the mth place (where m is not already set), - change this fields value to k + 10 ** m. + change this fields value to ``k + 10 ** m``. diff --git a/Documentation/ABI/testing/sysfs-bus-vfio-mdev b/Documentation/ABI/testing/sysfs-bus-vfio-mdev index 452dbe39270e..59fc804265db 100644 --- a/Documentation/ABI/testing/sysfs-bus-vfio-mdev +++ b/Documentation/ABI/testing/sysfs-bus-vfio-mdev @@ -28,8 +28,9 @@ Description: Writing UUID to this file will create mediated device of type <type-id> for parent device <device>. This is a write-only file. - For example: - # echo "83b8f4f2-509f-382f-3c1e-e6bfe0fa1001" > \ + For example:: + + # echo "83b8f4f2-509f-382f-3c1e-e6bfe0fa1001" > \ /sys/devices/foo/mdev_supported_types/foo-1/create What: /sys/.../mdev_supported_types/<type-id>/devices/ @@ -107,5 +108,6 @@ Description: Writing '1' to this file destroys the mediated device. The vendor driver can fail the remove() callback if that device is active and the vendor driver doesn't support hot unplug. - Example: - # echo 1 > /sys/bus/mdev/devices/<UUID>/remove + Example:: + + # echo 1 > /sys/bus/mdev/devices/<UUID>/remove diff --git a/Documentation/ABI/testing/sysfs-c2port b/Documentation/ABI/testing/sysfs-c2port index 716cffc457e9..f7b8cf6e4398 100644 --- a/Documentation/ABI/testing/sysfs-c2port +++ b/Documentation/ABI/testing/sysfs-c2port @@ -66,13 +66,6 @@ Description: the "erase" command on the on-board flash of the connected micro. -What: /sys/class/c2port/c2portX/flash_erase -Date: October 2008 -Contact: Rodolfo Giometti <giometti@linux.it> -Description: - The /sys/class/c2port/c2portX/flash_erase file show the - on-board flash size of the connected micro. - What: /sys/class/c2port/c2portX/reset Date: October 2008 Contact: Rodolfo Giometti <giometti@linux.it> diff --git a/Documentation/ABI/testing/sysfs-class-backlight b/Documentation/ABI/testing/sysfs-class-backlight index 3ab175a3f5cb..1fc86401bf95 100644 --- a/Documentation/ABI/testing/sysfs-class-backlight +++ b/Documentation/ABI/testing/sysfs-class-backlight @@ -24,3 +24,63 @@ Description: non-linear The brightness changes non-linearly with each step. Brightness controls should use a linear mapping for a linear perception. + +What: /sys/class/backlight/<backlight>/ambient_light_level +Date: Apr, 2010 +KernelVersion: v2.6.35 +Contact: Michael Hennerich <michael.hennerich@analog.com> +Description: + (RO) Get conversion value of the light sensor. + + The value is automatically updated every 80 ms when the + light sensor is enabled. + + The value range is device-driver specific: + + For ADP8870: + + It returns integer between 0 (dark) and 8000 (max ambient + brightness). + + For ADP8860: + + It returns a 13-bits integer. + +What: /sys/class/backlight/<backlight>/ambient_light_zone +Date: Apr, 2010 +KernelVersion: v2.6.35 +Contact: Michael Hennerich <michael.hennerich@analog.com>, + device-drivers-devel@blackfin.uclinux.org + +Description: + (RW) Read or write the specific brightness level at which the + backlight operates. + + The value meaning is device-driver specific: + + For ADP8860: + + == ========================== + 0 Off: Backlight set to 0 mA + 1 Level 1: daylight + 2 Level 2: bright + 3 Level 3: dark + == ========================== + + For ADP8870: + + == ========================== + 0 Off: Backlight set to 0 mA + 1 Level 1: daylight + 2 Level 2: bright + 3 Level 3: office + 4 Level 4: indoor + 5 Level 5: dark + == ========================== + + Writing 0 returns to normal/automatic ambient light level + operation. + + It can be enabled by writing the value stored in + /sys/class/backlight/<backlight>/max_brightness to + /sys/class/backlight/<backlight>/brightness. diff --git a/Documentation/ABI/testing/sysfs-class-backlight-adp8860 b/Documentation/ABI/testing/sysfs-class-backlight-adp8860 index 54d61c788b1b..6610ac73f9ba 100644 --- a/Documentation/ABI/testing/sysfs-class-backlight-adp8860 +++ b/Documentation/ABI/testing/sysfs-class-backlight-adp8860 @@ -6,25 +6,8 @@ adp8860, adp8861 and adp8863 devices: daylight (level 1), office (level 2) and dark (level 3). By default the brightness operates at the daylight brightness level. -What: /sys/class/backlight/<backlight>/ambient_light_level -Date: Apr, 2010 -KernelVersion: v2.6.35 -Contact: Michael Hennerich <michael.hennerich@analog.com> -Description: - (RO) 13-bit conversion value for the first light sensor—high - byte (Bit 12 to Bit 8). The value is updated every 80 ms (when - the light sensor is enabled). - - -What: /sys/class/backlight/<backlight>/ambient_light_zone -Date: Apr, 2010 -KernelVersion: v2.6.35 -Contact: Michael Hennerich <michael.hennerich@analog.com> -Description: - (RW) Read or write the specific level at which the backlight - operates. Value "0" enables automatic ambient light sensing, and - values "1", "2" or "3" set the control to daylight, office or - dark respectively. +See also /sys/class/backlight/<backlight>/ambient_light_level and +/sys/class/backlight/<backlight>/ambient_light_zone. What: /sys/class/backlight/<backlight>/l1_daylight_max diff --git a/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 b/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 index 33e648808117..b08ca912cad4 100644 --- a/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 +++ b/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 @@ -1,3 +1,6 @@ +See also /sys/class/backlight/<backlight>/ambient_light_level and +/sys/class/backlight/<backlight>/ambient_light_zone. + What: /sys/class/backlight/<backlight>/<ambient light zone>_max What: /sys/class/backlight/<backlight>/l1_daylight_max What: /sys/class/backlight/<backlight>/l2_bright_max @@ -27,30 +30,3 @@ Description: set to 0. Full off when the backlight is disabled. This file will also show the dim brightness level stored for this <ambient light zone>. - -What: /sys/class/backlight/<backlight>/ambient_light_level -Date: May 2011 -KernelVersion: 3.0 -Contact: device-drivers-devel@blackfin.uclinux.org -Description: - Get conversion value of the light sensor. - This value is updated every 80 ms (when the light sensor - is enabled). Returns integer between 0 (dark) and - 8000 (max ambient brightness) - -What: /sys/class/backlight/<backlight>/ambient_light_zone -Date: May 2011 -KernelVersion: 3.0 -Contact: device-drivers-devel@blackfin.uclinux.org -Description: - Get/Set current ambient light zone. Reading returns - integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark). - Writing a value between 1..5 forces the backlight controller - to enter the corresponding ambient light zone. - Writing 0 returns to normal/automatic ambient light level - operation. The ambient light sensing feature on these devices - is an extension to the API documented in - Documentation/ABI/stable/sysfs-class-backlight. - It can be enabled by writing the value stored in - /sys/class/backlight/<backlight>/max_brightness to - /sys/class/backlight/<backlight>/brightness. diff --git a/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 b/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 index c0e0a9ae7b3d..8251e78abc49 100644 --- a/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 +++ b/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 @@ -6,8 +6,10 @@ Description: Get the ALS output channel used as input in ALS-current-control mode (0, 1), where: - 0 - out_current0 (backlight 0) - 1 - out_current1 (backlight 1) + == ========================== + 0 out_current0 (backlight 0) + 1 out_current1 (backlight 1) + == ========================== What: /sys/class/backlight/<backlight>/als_en Date: May 2012 @@ -30,8 +32,10 @@ Contact: Johan Hovold <jhovold@gmail.com> Description: Set the brightness-mapping mode (0, 1), where: - 0 - exponential mode - 1 - linear mode + == ================ + 0 exponential mode + 1 linear mode + == ================ What: /sys/class/backlight/<backlight>/pwm Date: April 2012 @@ -40,9 +44,11 @@ Contact: Johan Hovold <jhovold@gmail.com> Description: Set the PWM-input control mask (5 bits), where: - bit 5 - PWM-input enabled in Zone 4 - bit 4 - PWM-input enabled in Zone 3 - bit 3 - PWM-input enabled in Zone 2 - bit 2 - PWM-input enabled in Zone 1 - bit 1 - PWM-input enabled in Zone 0 - bit 0 - PWM-input enabled + ===== =========================== + bit 5 PWM-input enabled in Zone 4 + bit 4 PWM-input enabled in Zone 3 + bit 3 PWM-input enabled in Zone 2 + bit 2 PWM-input enabled in Zone 1 + bit 1 PWM-input enabled in Zone 0 + bit 0 PWM-input enabled + ===== =========================== diff --git a/Documentation/ABI/testing/sysfs-class-bdi b/Documentation/ABI/testing/sysfs-class-bdi index d773d5697cf5..5402bd74ba43 100644 --- a/Documentation/ABI/testing/sysfs-class-bdi +++ b/Documentation/ABI/testing/sysfs-class-bdi @@ -24,7 +24,6 @@ default filesystems which do not provide their own BDI. Files under /sys/class/bdi/<bdi>/ ---------------------------------- read_ahead_kb (read-write) diff --git a/Documentation/ABI/testing/sysfs-class-chromeos b/Documentation/ABI/testing/sysfs-class-chromeos index 5819699d66ec..74ece942722e 100644 --- a/Documentation/ABI/testing/sysfs-class-chromeos +++ b/Documentation/ABI/testing/sysfs-class-chromeos @@ -17,13 +17,14 @@ Date: August 2015 KernelVersion: 4.2 Description: Tell the EC to reboot in various ways. Options are: - "cancel": Cancel a pending reboot. - "ro": Jump to RO without rebooting. - "rw": Jump to RW without rebooting. - "cold": Cold reboot. - "disable-jump": Disable jump until next reboot. - "hibernate": Hibernate the EC. - "at-shutdown": Reboot after an AP shutdown. + + - "cancel": Cancel a pending reboot. + - "ro": Jump to RO without rebooting. + - "rw": Jump to RW without rebooting. + - "cold": Cold reboot. + - "disable-jump": Disable jump until next reboot. + - "hibernate": Hibernate the EC. + - "at-shutdown": Reboot after an AP shutdown. What: /sys/class/chromeos/<ec-device-name>/version Date: August 2015 diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl index 7970e3713e70..818f55970efb 100644 --- a/Documentation/ABI/testing/sysfs-class-cxl +++ b/Documentation/ABI/testing/sysfs-class-cxl @@ -72,11 +72,16 @@ Description: read/write when performing the START_WORK ioctl. Only applicable when running under hashed page table mmu. Possible values: - none: No prefaulting (default) - work_element_descriptor: Treat the work element - descriptor as an effective address and - prefault what it points to. - all: all segments process calling START_WORK maps. + + ======================= ====================================== + none No prefaulting (default) + work_element_descriptor Treat the work element + descriptor as an effective address and + prefault what it points to. + all all segments process calling + START_WORK maps. + ======================= ====================================== + Users: https://github.com/ibm-capi/libcxl What: /sys/class/cxl/<afu>/reset @@ -212,6 +217,7 @@ Description: read/write card. A power cycle is required to load the image. "none" could be useful for debugging because the trace arrays are preserved. + "user" and "factory" means PERST will cause either the user or user or factory image to be loaded. Default is to reload on PERST whichever image the card has @@ -235,8 +241,11 @@ Contact: linuxppc-dev@lists.ozlabs.org Description: read/write Trust that when an image is reloaded via PERST, it will not have changed. - 0 = don't trust, the image may be different (default) - 1 = trust that the image will not change. + + == ================================================= + 0 don't trust, the image may be different (default) + 1 trust that the image will not change. + == ================================================= Users: https://github.com/ibm-capi/libcxl What: /sys/class/cxl/<card>/psl_timebase_synced diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq index deefffb3bbe4..b8ebff4b1c4c 100644 --- a/Documentation/ABI/testing/sysfs-class-devfreq +++ b/Documentation/ABI/testing/sysfs-class-devfreq @@ -62,7 +62,8 @@ Description: driver should provide the list of available frequencies with its profile. If need to reset the statistics of devfreq behavior on a specific device, enter 0(zero) to 'trans_stat' - as following: + as following:: + echo 0 > /sys/class/devfreq/.../trans_stat What: /sys/class/devfreq/.../userspace/set_freq @@ -117,6 +118,7 @@ Description: This work timer is used by devfreq workqueue in order to monitor the device status such as utilization. The user can change the work timer on runtime according to their demand - as following: + as following:: + echo deferrable > /sys/class/devfreq/.../timer echo delayed > /sys/class/devfreq/.../timer diff --git a/Documentation/ABI/testing/sysfs-class-devlink b/Documentation/ABI/testing/sysfs-class-devlink index 64791b65c9a3..b662f747c83e 100644 --- a/Documentation/ABI/testing/sysfs-class-devlink +++ b/Documentation/ABI/testing/sysfs-class-devlink @@ -18,9 +18,9 @@ Description: This will be one of the following strings: - 'consumer unbind' - 'supplier unbind' - 'never' + - 'consumer unbind' + - 'supplier unbind' + - 'never' 'consumer unbind' means the device link will be removed when the consumer's driver is unbound from the consumer device. @@ -49,8 +49,10 @@ Description: This will be one of the following strings: - '0' - Does not affect runtime power management - '1' - Affects runtime power management + === ======================================== + '0' Does not affect runtime power management + '1' Affects runtime power management + === ======================================== What: /sys/class/devlink/.../status Date: May 2020 @@ -68,13 +70,13 @@ Description: This will be one of the following strings: - 'not tracked' - 'dormant' - 'available' - 'consumer probing' - 'active' - 'supplier unbinding' - 'unknown' + - 'not tracked' + - 'dormant' + - 'available' + - 'consumer probing' + - 'active' + - 'supplier unbinding' + - 'unknown' 'not tracked' means this device link does not track the status and has no impact on the binding, unbinding and syncing the @@ -114,8 +116,10 @@ Description: This will be one of the following strings: + === ================================ '0' - '1' - Affects runtime power management + '1' Affects runtime power management + === ================================ '0' means the device link can affect other device behaviors like binding/unbinding, suspend/resume, runtime power diff --git a/Documentation/ABI/testing/sysfs-class-extcon b/Documentation/ABI/testing/sysfs-class-extcon index 57a726232912..fde0fecd5de9 100644 --- a/Documentation/ABI/testing/sysfs-class-extcon +++ b/Documentation/ABI/testing/sysfs-class-extcon @@ -39,19 +39,22 @@ Description: callback. If the default callback for showing function is used, the - format is like this: - # cat state - USB_OTG=1 - HDMI=0 - TA=1 - EAR_JACK=0 - # + format is like this:: + + # cat state + USB_OTG=1 + HDMI=0 + TA=1 + EAR_JACK=0 + # + In this example, the extcon device has USB_OTG and TA cables attached and HDMI and EAR_JACK cables detached. In order to update the state of an extcon device, enter a hex - state number starting with 0x: - # echo 0xHEX > state + state number starting with 0x:: + + # echo 0xHEX > state This updates the whole state of the extcon device. Inputs of all the methods are required to meet the @@ -84,12 +87,13 @@ Contact: MyungJoo Ham <myungjoo.ham@samsung.com> Description: Shows the relations of mutually exclusiveness. For example, if the mutually_exclusive array of extcon device is - {0x3, 0x5, 0xC, 0x0}, then the output is: - # ls mutually_exclusive/ - 0x3 - 0x5 - 0xc - # + {0x3, 0x5, 0xC, 0x0}, then the output is:: + + # ls mutually_exclusive/ + 0x3 + 0x5 + 0xc + # Note that mutually_exclusive is a sub-directory of the extcon device and the file names under the mutually_exclusive diff --git a/Documentation/ABI/testing/sysfs-class-fpga-manager b/Documentation/ABI/testing/sysfs-class-fpga-manager index 5284fa33d4c5..d78689c357a5 100644 --- a/Documentation/ABI/testing/sysfs-class-fpga-manager +++ b/Documentation/ABI/testing/sysfs-class-fpga-manager @@ -28,8 +28,7 @@ Description: Read fpga manager state as a string. * firmware request = firmware class request in progress * firmware request error = firmware request failed * write init = preparing FPGA for programming - * write init error = Error while preparing FPGA for - programming + * write init error = Error while preparing FPGA for programming * write = FPGA ready to receive image data * write error = Error while programming * write complete = Doing post programming steps @@ -47,7 +46,7 @@ Description: Read fpga manager status as a string. programming errors to userspace. This is a list of strings for the supported status. - * reconfig operation error - invalid operations detected by + * reconfig operation error - invalid operations detected by reconfiguration hardware. e.g. start reconfiguration with errors not cleared diff --git a/Documentation/ABI/testing/sysfs-class-gnss b/Documentation/ABI/testing/sysfs-class-gnss index 2467b6900eae..c8553d972edd 100644 --- a/Documentation/ABI/testing/sysfs-class-gnss +++ b/Documentation/ABI/testing/sysfs-class-gnss @@ -6,9 +6,11 @@ Description: The GNSS receiver type. The currently identified types reflect the protocol(s) supported by the receiver: + ====== =========== "NMEA" NMEA 0183 "SiRF" SiRF Binary "UBX" UBX + ====== =========== Note that also non-"NMEA" type receivers typically support a subset of NMEA 0183 with vendor extensions (e.g. to allow diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led index 5f67f7ab277b..2e24ac3bd7ef 100644 --- a/Documentation/ABI/testing/sysfs-class-led +++ b/Documentation/ABI/testing/sysfs-class-led @@ -3,9 +3,26 @@ Date: March 2006 KernelVersion: 2.6.17 Contact: Richard Purdie <rpurdie@rpsys.net> Description: - Set the brightness of the LED. Most LEDs don't - have hardware brightness support, so will just be turned on for - non-zero brightness settings. The value is between 0 and + Set the brightness of the LED. + + Most LEDs don't have hardware brightness support, so will + just be turned on for non-zero brightness settings. + + .. Note:: + + For multicolor LEDs, writing to this file will update all + LEDs within the group to a calculated percentage of what + each color LED intensity is set to. + + The percentage is calculated for each grouped LED via + the equation below:: + + led_brightness = brightness * multi_intensity/max_brightness + + For additional details please refer to + Documentation/leds/leds-class-multicolor.rst. + + The value is between 0 and /sys/class/leds/<led>/max_brightness. Writing 0 to this file clears active trigger. @@ -13,6 +30,8 @@ Description: Writing non-zero to this file while trigger is active changes the top brightness trigger is going to use. + + What: /sys/class/leds/<led>/max_brightness Date: March 2006 KernelVersion: 2.6.17 @@ -47,10 +66,11 @@ Contact: Richard Purdie <rpurdie@rpsys.net> Description: Set the trigger for this LED. A trigger is a kernel based source of LED events. + You can change triggers in a similar manner to the way an IO scheduler is chosen. Trigger specific parameters can appear in /sys/class/leds/<led> once a given trigger is selected. For - their documentation see sysfs-class-led-trigger-*. + their documentation see `sysfs-class-led-trigger-*`. What: /sys/class/leds/<led>/inverted Date: January 2011 diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-el15203000 b/Documentation/ABI/testing/sysfs-class-led-driver-el15203000 index f520ece9b64c..04f3ffdc5936 100644 --- a/Documentation/ABI/testing/sysfs-class-led-driver-el15203000 +++ b/Documentation/ABI/testing/sysfs-class-led-driver-el15203000 @@ -1,133 +1,3 @@ -What: /sys/class/leds/<led>/hw_pattern -Date: September 2019 -KernelVersion: 5.5 -Description: - Specify a hardware pattern for the EL15203000 LED. - The LEDs board supports only predefined patterns by firmware - for specific LEDs. - - Breathing mode for Screen frame light tube: - "0 4000 1 4000" - - ^ - | - Max-| --- - | / \ - | / \ - | / \ / - | / \ / - Min-|- --- - | - 0------4------8--> time (sec) - - Cascade mode for Pipe LED: - "1 800 2 800 4 800 8 800 16 800" - - ^ - | - 0 On -|----+ +----+ +--- - | | | | | - Off-| +-------------------+ +-------------------+ - | - 1 On -| +----+ +----+ - | | | | | - Off |----+ +-------------------+ +------------------ - | - 2 On -| +----+ +----+ - | | | | | - Off-|---------+ +-------------------+ +------------- - | - 3 On -| +----+ +----+ - | | | | | - Off-|--------------+ +-------------------+ +-------- - | - 4 On -| +----+ +----+ - | | | | | - Off-|-------------------+ +-------------------+ +--- - | - 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec) - - Inverted cascade mode for Pipe LED: - "30 800 29 800 27 800 23 800 15 800" - - ^ - | - 0 On -| +-------------------+ +-------------------+ - | | | | | - Off-|----+ +----+ +--- - | - 1 On -|----+ +-------------------+ +------------------ - | | | | | - Off | +----+ +----+ - | - 2 On -|---------+ +-------------------+ +------------- - | | | | | - Off-| +----+ +----+ - | - 3 On -|--------------+ +-------------------+ +-------- - | | | | | - Off-| +----+ +----+ - | - 4 On -|-------------------+ +-------------------+ +--- - | | | | | - Off-| +----+ +----+ - | - 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec) - - Bounce mode for Pipe LED: - "1 800 2 800 4 800 8 800 16 800 16 800 8 800 4 800 2 800 1 800" - - ^ - | - 0 On -|----+ +-------- - | | | - Off-| +---------------------------------------+ - | - 1 On -| +----+ +----+ - | | | | | - Off |----+ +-----------------------------+ +-------- - | - 2 On -| +----+ +----+ - | | | | | - Off-|---------+ +-------------------+ +------------- - | - 3 On -| +----+ +----+ - | | | | | - Off-|--------------+ +---------+ +------------------ - | - 4 On -| +---------+ - | | | - Off-|-------------------+ +----------------------- - | - 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec) - - Inverted bounce mode for Pipe LED: - "30 800 29 800 27 800 23 800 15 800 15 800 23 800 27 800 29 800 30 800" - - ^ - | - 0 On -| +---------------------------------------+ - | | | - Off-|----+ +-------- - | - 1 On -|----+ +-----------------------------+ +-------- - | | | | | - Off | +----+ +----+ - | - 2 On -|---------+ +-------------------+ +------------- - | | | | | - Off-| +----+ +----+ - | - 3 On -|--------------+ +---------+ +------------------ - | | | | | - Off-| +----+ +----+ - | - 4 On -|-------------------+ +----------------------- - | | | - Off-| +---------+ - | - 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec) - What: /sys/class/leds/<led>/repeat Date: September 2019 KernelVersion: 5.5 diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 b/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 index e4c89b261546..e38a835d0a85 100644 --- a/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 +++ b/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 @@ -6,8 +6,10 @@ Description: Set the ALS output channel to use as input in ALS-current-control mode (1, 2), where: - 1 - out_current1 - 2 - out_current2 + == ============ + 1 out_current1 + 2 out_current2 + == ============ What: /sys/class/leds/<led>/als_en Date: May 2012 @@ -24,14 +26,16 @@ Contact: Johan Hovold <jhovold@gmail.com> Description: Set the pattern generator fall and rise times (0..7), where: - 0 - 2048 us - 1 - 262 ms - 2 - 524 ms - 3 - 1.049 s - 4 - 2.097 s - 5 - 4.194 s - 6 - 8.389 s - 7 - 16.78 s + == ======= + 0 2048 us + 1 262 ms + 2 524 ms + 3 1.049 s + 4 2.097 s + 5 4.194 s + 6 8.389 s + 7 16.78 s + == ======= What: /sys/class/leds/<led>/id Date: April 2012 @@ -47,8 +51,10 @@ Contact: Johan Hovold <jhovold@gmail.com> Description: Set the brightness-mapping mode (0, 1), where: - 0 - exponential mode - 1 - linear mode + == ================ + 0 exponential mode + 1 linear mode + == ================ What: /sys/class/leds/<led>/pwm Date: April 2012 @@ -57,9 +63,11 @@ Contact: Johan Hovold <jhovold@gmail.com> Description: Set the PWM-input control mask (5 bits), where: - bit 5 - PWM-input enabled in Zone 4 - bit 4 - PWM-input enabled in Zone 3 - bit 3 - PWM-input enabled in Zone 2 - bit 2 - PWM-input enabled in Zone 1 - bit 1 - PWM-input enabled in Zone 0 - bit 0 - PWM-input enabled + ===== =========================== + bit 5 PWM-input enabled in Zone 4 + bit 4 PWM-input enabled in Zone 3 + bit 3 PWM-input enabled in Zone 2 + bit 2 PWM-input enabled in Zone 1 + bit 1 PWM-input enabled in Zone 0 + bit 0 PWM-input enabled + ===== =========================== diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx b/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx deleted file mode 100644 index 45b1e605d355..000000000000 --- a/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx +++ /dev/null @@ -1,22 +0,0 @@ -What: /sys/class/leds/<led>/hw_pattern -Date: September 2018 -KernelVersion: 4.20 -Description: - Specify a hardware pattern for the SC27XX LED. For the SC27XX - LED controller, it only supports 4 stages to make a single - hardware pattern, which is used to configure the rise time, - high time, fall time and low time for the breathing mode. - - For the breathing mode, the SC27XX LED only expects one brightness - for the high stage. To be compatible with the hardware pattern - format, we should set brightness as 0 for rise stage, fall - stage and low stage. - - Min stage duration: 125 ms - Max stage duration: 31875 ms - - Since the stage duration step is 125 ms, the duration should be - a multiplier of 125, like 125ms, 250ms, 375ms, 500ms ... 31875ms. - - Thus the format of the hardware pattern values should be: - "0 rise_duration brightness high_duration 0 fall_duration 0 low_duration". diff --git a/Documentation/ABI/testing/sysfs-class-led-flash b/Documentation/ABI/testing/sysfs-class-led-flash index 220a0270b47b..11e5677c3672 100644 --- a/Documentation/ABI/testing/sysfs-class-led-flash +++ b/Documentation/ABI/testing/sysfs-class-led-flash @@ -55,26 +55,35 @@ Description: read only Flash faults are re-read after strobing the flash. Possible flash faults: - * led-over-voltage - flash controller voltage to the flash LED + * led-over-voltage + flash controller voltage to the flash LED has exceeded the limit specific to the flash controller - * flash-timeout-exceeded - the flash strobe was still on when + * flash-timeout-exceeded + the flash strobe was still on when the timeout set by the user has expired; not all flash controllers may set this in all such conditions - * controller-over-temperature - the flash controller has + * controller-over-temperature + the flash controller has overheated - * controller-short-circuit - the short circuit protection + * controller-short-circuit + the short circuit protection of the flash controller has been triggered - * led-power-supply-over-current - current in the LED power + * led-power-supply-over-current + current in the LED power supply has exceeded the limit specific to the flash controller - * indicator-led-fault - the flash controller has detected + * indicator-led-fault + the flash controller has detected a short or open circuit condition on the indicator LED - * led-under-voltage - flash controller voltage to the flash + * led-under-voltage + flash controller voltage to the flash LED has been below the minimum limit specific to the flash - * controller-under-voltage - the input voltage of the flash + * controller-under-voltage + the input voltage of the flash controller is below the limit under which strobing the flash at full current will not be possible; the condition persists until this flag is no longer set - * led-over-temperature - the temperature of the LED has exceeded + * led-over-temperature + the temperature of the LED has exceeded its allowed upper limit diff --git a/Documentation/ABI/testing/sysfs-class-led-multicolor b/Documentation/ABI/testing/sysfs-class-led-multicolor index eeeddcbdbbe3..16fc827b10cb 100644 --- a/Documentation/ABI/testing/sysfs-class-led-multicolor +++ b/Documentation/ABI/testing/sysfs-class-led-multicolor @@ -1,20 +1,3 @@ -What: /sys/class/leds/<led>/brightness -Date: March 2020 -KernelVersion: 5.9 -Contact: Dan Murphy <dmurphy@ti.com> -Description: read/write - Writing to this file will update all LEDs within the group to a - calculated percentage of what each color LED intensity is set - to. The percentage is calculated for each grouped LED via the - equation below: - - led_brightness = brightness * multi_intensity/max_brightness - - For additional details please refer to - Documentation/leds/leds-class-multicolor.rst. - - The value of the LED is from 0 to - /sys/class/leds/<led>/max_brightness. What: /sys/class/leds/<led>/multi_index Date: March 2020 @@ -25,6 +8,9 @@ Description: read as an array of strings as they are indexed in the multi_intensity file. + For additional details please refer to + Documentation/leds/leds-class-multicolor.rst. + What: /sys/class/leds/<led>/multi_intensity Date: March 2020 KernelVersion: 5.9 @@ -33,3 +19,6 @@ Description: read/write This file contains array of integers. Order of components is described by the multi_index array. The maximum intensity should not exceed /sys/class/leds/<led>/max_brightness. + + For additional details please refer to + Documentation/leds/leds-class-multicolor.rst. diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev index 451af6d6768c..646540950e38 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev @@ -19,18 +19,23 @@ KernelVersion: 4.16 Contact: linux-leds@vger.kernel.org Description: Signal the link state of the named network device. + If set to 0 (default), the LED's normal state is off. + If set to 1, the LED's normal state reflects the link state of the named network device. Setting this value also immediately changes the LED state. + What: /sys/class/leds/<led>/tx Date: Dec 2017 KernelVersion: 4.16 Contact: linux-leds@vger.kernel.org Description: Signal transmission of data on the named network device. + If set to 0 (default), the LED will not blink on transmission. + If set to 1, the LED will blink for the milliseconds specified in interval to signal transmission. @@ -40,6 +45,8 @@ KernelVersion: 4.16 Contact: linux-leds@vger.kernel.org Description: Signal reception of data on the named network device. + If set to 0 (default), the LED will not blink on reception. + If set to 1, the LED will blink for the milliseconds specified in interval to signal reception. diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern index bd92ef9d6faa..d91a07767adf 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern @@ -23,8 +23,8 @@ Description: Since different LED hardware can have different semantics of hardware patterns, each driver is expected to provide its own - description for the hardware patterns in their ABI documentation - file. + description for the hardware patterns in their documentation + file at Documentation/leds/. What: /sys/class/leds/<led>/repeat Date: September 2018 diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-usbport b/Documentation/ABI/testing/sysfs-class-led-trigger-usbport index f440e690daef..eb81152b8348 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-usbport +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-usbport @@ -8,5 +8,6 @@ Description: selected for the USB port trigger. Selecting ports makes trigger observing them for any connected devices and lighting on LED if there are any. + Echoing "1" value selects USB port. Echoing "0" unselects it. Current state can be also read. diff --git a/Documentation/ABI/testing/sysfs-class-leds-gt683r b/Documentation/ABI/testing/sysfs-class-leds-gt683r index 6adab27f646e..b57ffb26e722 100644 --- a/Documentation/ABI/testing/sysfs-class-leds-gt683r +++ b/Documentation/ABI/testing/sysfs-class-leds-gt683r @@ -7,9 +7,11 @@ Description: of one LED will update the mode of its two sibling devices as well. Possible values are: - 0 - normal - 1 - audio - 2 - breathing + == ========= + 0 normal + 1 audio + 2 breathing + == ========= Normal: LEDs are fully on when enabled Audio: LEDs brightness depends on sound level diff --git a/Documentation/ABI/testing/sysfs-class-mic b/Documentation/ABI/testing/sysfs-class-mic index 6ef682603179..bd0e780c3760 100644 --- a/Documentation/ABI/testing/sysfs-class-mic +++ b/Documentation/ABI/testing/sysfs-class-mic @@ -41,24 +41,33 @@ Description: When read, this entry provides the current state of an Intel MIC device in the context of the card OS. Possible values that will be read are: - "ready" - The MIC device is ready to boot the card OS. On - reading this entry after an OSPM resume, a "boot" has to be - written to this entry if the card was previously shutdown - during OSPM suspend. - "booting" - The MIC device has initiated booting a card OS. - "online" - The MIC device has completed boot and is online - "shutting_down" - The card OS is shutting down. - "resetting" - A reset has been initiated for the MIC device - "reset_failed" - The MIC device has failed to reset. + + + =============== =============================================== + "ready" The MIC device is ready to boot the card OS. + On reading this entry after an OSPM resume, + a "boot" has to be written to this entry if + the card was previously shutdown during OSPM + suspend. + "booting" The MIC device has initiated booting a card OS. + "online" The MIC device has completed boot and is online + "shutting_down" The card OS is shutting down. + "resetting" A reset has been initiated for the MIC device + "reset_failed" The MIC device has failed to reset. + =============== =============================================== When written, this sysfs entry triggers different state change operations depending upon the current state of the card OS. Acceptable values are: - "boot" - Boot the card OS image specified by the combination - of firmware, ramdisk, cmdline and bootmode - sysfs entries. - "reset" - Initiates device reset. - "shutdown" - Initiates card OS shutdown. + + + ========== =================================================== + "boot" Boot the card OS image specified by the combination + of firmware, ramdisk, cmdline and bootmode + sysfs entries. + "reset" Initiates device reset. + "shutdown" Initiates card OS shutdown. + ========== =================================================== What: /sys/class/mic/mic(x)/shutdown_status Date: October 2013 @@ -69,12 +78,15 @@ Description: OS can shutdown because of various reasons. When read, this entry provides the status on why the card OS was shutdown. Possible values are: - "nop" - shutdown status is not applicable, when the card OS is - "online" - "crashed" - Shutdown because of a HW or SW crash. - "halted" - Shutdown because of a halt command. - "poweroff" - Shutdown because of a poweroff command. - "restart" - Shutdown because of a restart command. + + ========== =================================================== + "nop" shutdown status is not applicable, when the card OS + is "online" + "crashed" Shutdown because of a HW or SW crash. + "halted" Shutdown because of a halt command. + "poweroff" Shutdown because of a poweroff command. + "restart" Shutdown because of a restart command. + ========== =================================================== What: /sys/class/mic/mic(x)/cmdline Date: October 2013 diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net index 3b404577f380..7670012ae9b6 100644 --- a/Documentation/ABI/testing/sysfs-class-net +++ b/Documentation/ABI/testing/sysfs-class-net @@ -4,10 +4,13 @@ KernelVersion: 3.17 Contact: netdev@vger.kernel.org Description: Indicates the name assignment type. Possible values are: - 1: enumerated by the kernel, possibly in an unpredictable way - 2: predictably named by the kernel - 3: named by userspace - 4: renamed + + == ========================================================== + 1 enumerated by the kernel, possibly in an unpredictable way + 2 predictably named by the kernel + 3 named by userspace + 4 renamed + == ========================================================== What: /sys/class/net/<iface>/addr_assign_type Date: July 2010 @@ -15,10 +18,13 @@ KernelVersion: 3.2 Contact: netdev@vger.kernel.org Description: Indicates the address assignment type. Possible values are: - 0: permanent address - 1: randomly generated - 2: stolen from another device - 3: set using dev_set_mac_address + + == ============================= + 0 permanent address + 1 randomly generated + 2 stolen from another device + 3 set using dev_set_mac_address + == ============================= What: /sys/class/net/<iface>/addr_len Date: April 2005 @@ -51,9 +57,12 @@ Description: Default value 0 does not forward any link local frames. Restricted bits: - 0: 01-80-C2-00-00-00 Bridge Group Address used for STP - 1: 01-80-C2-00-00-01 (MAC Control) 802.3 used for MAC PAUSE - 2: 01-80-C2-00-00-02 (Link Aggregation) 802.3ad + + == ======================================================== + 0 01-80-C2-00-00-00 Bridge Group Address used for STP + 1 01-80-C2-00-00-01 (MAC Control) 802.3 used for MAC PAUSE + 2 01-80-C2-00-00-02 (Link Aggregation) 802.3ad + == ======================================================== Any values not setting these bits can be used. Take special care when forwarding control frames e.g. 802.1X-PAE or LLDP. @@ -74,8 +83,11 @@ Contact: netdev@vger.kernel.org Description: Indicates the current physical link state of the interface. Posssible values are: - 0: physical link is down - 1: physical link is up + + == ===================== + 0 physical link is down + 1 physical link is up + == ===================== Note: some special devices, e.g: bonding and team drivers will allow this attribute to be written to force a link state for @@ -131,8 +143,11 @@ Contact: netdev@vger.kernel.org Description: Indicates whether the interface is under test. Possible values are: - 0: interface is not being tested - 1: interface is being tested + + == ============================= + 0 interface is not being tested + 1 interface is being tested + == ============================= When an interface is under test, it cannot be expected to pass packets as normal. @@ -144,8 +159,11 @@ Contact: netdev@vger.kernel.org Description: Indicates the interface latest or current duplex value. Possible values are: - half: half duplex - full: full duplex + + ==== =========== + half half duplex + full full duplex + ==== =========== Note: This attribute is only valid for interfaces that implement the ethtool get_link_ksettings method (mostly Ethernet). @@ -196,8 +214,11 @@ Description: Indicates the interface link mode, as a decimal number. This attribute should be used in conjunction with 'dormant' attribute to determine the interface usability. Possible values: - 0: default link mode - 1: dormant link mode + + == ================= + 0 default link mode + 1 dormant link mode + == ================= What: /sys/class/net/<iface>/mtu Date: April 2005 @@ -226,7 +247,9 @@ KernelVersion: 2.6.17 Contact: netdev@vger.kernel.org Description: Indicates the interface RFC2863 operational state as a string. + Possible values are: + "unknown", "notpresent", "down", "lowerlayerdown", "testing", "dormant", "up". diff --git a/Documentation/ABI/testing/sysfs-class-net-cdc_ncm b/Documentation/ABI/testing/sysfs-class-net-cdc_ncm index f7be0e88b139..06416d0e163d 100644 --- a/Documentation/ABI/testing/sysfs-class-net-cdc_ncm +++ b/Documentation/ABI/testing/sysfs-class-net-cdc_ncm @@ -91,9 +91,9 @@ Date: May 2014 KernelVersion: 3.16 Contact: Bjørn Mork <bjorn@mork.no> Description: - Bit 0: 16-bit NTB supported (set to 1) - Bit 1: 32-bit NTB supported - Bits 2 – 15: reserved (reset to zero; must be ignored by host) + - Bit 0: 16-bit NTB supported (set to 1) + - Bit 1: 32-bit NTB supported + - Bits 2 – 15: reserved (reset to zero; must be ignored by host) What: /sys/class/net/<iface>/cdc_ncm/dwNtbInMaxSize Date: May 2014 diff --git a/Documentation/ABI/testing/sysfs-class-net-phydev b/Documentation/ABI/testing/sysfs-class-net-phydev index 206cbf538b59..40ced0ea4316 100644 --- a/Documentation/ABI/testing/sysfs-class-net-phydev +++ b/Documentation/ABI/testing/sysfs-class-net-phydev @@ -35,7 +35,9 @@ Description: Ethernet driver during bus enumeration, encoded in string. This interface mode is used to configure the Ethernet MAC with the appropriate mode for its data lines to the PHY hardware. + Possible values are: + <empty> (not available), mii, gmii, sgmii, tbi, rev-mii, rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui, diff --git a/Documentation/ABI/testing/sysfs-class-ocxl b/Documentation/ABI/testing/sysfs-class-ocxl index ae1276efa45a..847a7edc3113 100644 --- a/Documentation/ABI/testing/sysfs-class-ocxl +++ b/Documentation/ABI/testing/sysfs-class-ocxl @@ -11,8 +11,11 @@ Contact: linuxppc-dev@lists.ozlabs.org Description: read only Number of contexts for the AFU, in the format <n>/<max> where: - n: number of currently active contexts, for debug - max: maximum number of contexts supported by the AFU + + ==== =============================================== + n number of currently active contexts, for debug + max maximum number of contexts supported by the AFU + ==== =============================================== What: /sys/class/ocxl/<afu name>/pp_mmio_size Date: January 2018 @@ -40,7 +43,9 @@ Contact: linuxppc-dev@lists.ozlabs.org Description: read/write Control whether the FPGA is reloaded on a link reset. Enabled through a vendor-specific logic block on the FPGA. - 0 Do not reload FPGA image from flash - 1 Reload FPGA image from flash - unavailable - The device does not support this capability + + =========== =========================================== + 0 Do not reload FPGA image from flash + 1 Reload FPGA image from flash + unavailable The device does not support this capability + =========== =========================================== diff --git a/Documentation/ABI/testing/sysfs-class-pktcdvd b/Documentation/ABI/testing/sysfs-class-pktcdvd index dde4f26d0780..ba1ce626591d 100644 --- a/Documentation/ABI/testing/sysfs-class-pktcdvd +++ b/Documentation/ABI/testing/sysfs-class-pktcdvd @@ -11,15 +11,17 @@ KernelVersion: 2.6.20 Contact: Thomas Maier <balagi@justmail.de> Description: - add: (WO) Write a block device id (major:minor) to + ========== ============================================== + add (WO) Write a block device id (major:minor) to create a new pktcdvd device and map it to the block device. - remove: (WO) Write the pktcdvd device id (major:minor) + remove (WO) Write the pktcdvd device id (major:minor) to remove the pktcdvd device. - device_map: (RO) Shows the device mapping in format: + device_map (RO) Shows the device mapping in format: pktcdvd[0-7] <pktdevid> <blkdevid> + ========== ============================================== What: /sys/class/pktcdvd/pktcdvd[0-7]/dev @@ -65,29 +67,31 @@ Date: Oct. 2006 KernelVersion: 2.6.20 Contact: Thomas Maier <balagi@justmail.de> Description: - size: (RO) Contains the size of the bio write queue. + ============== ================================================ + size (RO) Contains the size of the bio write queue. - congestion_off: (RW) If bio write queue size is below this mark, + congestion_off (RW) If bio write queue size is below this mark, accept new bio requests from the block layer. - congestion_on: (RW) If bio write queue size is higher as this + congestion_on (RW) If bio write queue size is higher as this mark, do no longer accept bio write requests from the block layer and wait till the pktcdvd device has processed enough bio's so that bio write queue size is below congestion off mark. A value of <= 0 disables congestion control. + ============== ================================================ Example: -------- -To use the pktcdvd sysfs interface directly, you can do: - -# create a new pktcdvd device mapped to /dev/hdc -echo "22:0" >/sys/class/pktcdvd/add -cat /sys/class/pktcdvd/device_map -# assuming device pktcdvd0 was created, look at stat's -cat /sys/class/pktcdvd/pktcdvd0/stat/kb_written -# print the device id of the mapped block device -fgrep pktcdvd0 /sys/class/pktcdvd/device_map -# remove device, using pktcdvd0 device id 253:0 -echo "253:0" >/sys/class/pktcdvd/remove +To use the pktcdvd sysfs interface directly, you can do:: + + # create a new pktcdvd device mapped to /dev/hdc + echo "22:0" >/sys/class/pktcdvd/add + cat /sys/class/pktcdvd/device_map + # assuming device pktcdvd0 was created, look at stat's + cat /sys/class/pktcdvd/pktcdvd0/stat/kb_written + # print the device id of the mapped block device + fgrep pktcdvd0 /sys/class/pktcdvd/device_map + # remove device, using pktcdvd0 device id 253:0 + echo "253:0" >/sys/class/pktcdvd/remove diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power index dbccb2fcd7ce..ca830c6cd809 100644 --- a/Documentation/ABI/testing/sysfs-class-power +++ b/Documentation/ABI/testing/sysfs-class-power @@ -1,4 +1,4 @@ -===== General Properties ===== +**General Properties** What: /sys/class/power_supply/<supply_name>/manufacturer Date: May 2007 @@ -36,14 +36,238 @@ Description: Access: Read Valid values: "Battery", "UPS", "Mains", "USB", "Wireless" -===== Battery Properties ===== +**Battery and USB properties** + +What: /sys/class/power_supply/<supply_name>/current_avg +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Battery: + + Reports an average IBAT current reading for the battery, over + a fixed period. Normally devices will provide a fixed interval + in which they average readings to smooth out the reported + value. + + USB: + + Reports an average IBUS current reading over a fixed period. + Normally devices will provide a fixed interval in which they + average readings to smooth out the reported value. + + Access: Read + + Valid values: Represented in microamps. Negative values are + used for discharging batteries, positive values for charging + batteries and for USB IBUS current. + +What: /sys/class/power_supply/<supply_name>/current_max +Date: October 2010 +Contact: linux-pm@vger.kernel.org +Description: + Battery: + + Reports the maximum IBAT current allowed into the battery. + + USB: + + Reports the maximum IBUS current the supply can support. + + Access: Read + Valid values: Represented in microamps + +What: /sys/class/power_supply/<supply_name>/current_now +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + + Battery: + + Reports an instant, single IBAT current reading for the + battery. This value is not averaged/smoothed. + + Access: Read + + USB: + + Reports the IBUS current supplied now. This value is generally + read-only reporting, unless the 'online' state of the supply + is set to be programmable, in which case this value can be set + within the reported min/max range. + + Access: Read, Write + + Valid values: Represented in microamps. Negative values are + used for discharging batteries, positive values for charging + batteries and for USB IBUS current. + +What: /sys/class/power_supply/<supply_name>/temp +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Battery: + + Reports the current TBAT battery temperature reading. + + USB: + + Reports the current supply temperature reading. This would + normally be the internal temperature of the device itself + (e.g TJUNC temperature of an IC) + + Access: Read + + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_alert_max +Date: July 2012 +Contact: linux-pm@vger.kernel.org +Description: + Battery: + + Maximum TBAT temperature trip-wire value where the supply will + notify user-space of the event. + + USB: + + Maximum supply temperature trip-wire value where the supply + will notify user-space of the event. + + This is normally used for the charging scenario where + user-space needs to know if the temperature has crossed an + upper threshold so it can take appropriate action (e.g. warning + user that the temperature is critically high, and charging has + stopped). + + Access: Read + + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_alert_min +Date: July 2012 +Contact: linux-pm@vger.kernel.org +Description: + + Battery: + + Minimum TBAT temperature trip-wire value where the supply will + notify user-space of the event. + + USB: + + Minimum supply temperature trip-wire value where the supply + will notify user-space of the event. + + This is normally used for the charging scenario where user-space + needs to know if the temperature has crossed a lower threshold + so it can take appropriate action (e.g. warning user that + temperature level is high, and charging current has been + reduced accordingly to remedy the situation). + + Access: Read + + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_max +Date: July 2014 +Contact: linux-pm@vger.kernel.org +Description: + Battery: + + Reports the maximum allowed TBAT battery temperature for + charging. + + USB: + + Reports the maximum allowed supply temperature for operation. + + Access: Read + + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_min +Date: July 2014 +Contact: linux-pm@vger.kernel.org +Description: + Battery: + + Reports the minimum allowed TBAT battery temperature for + charging. + + USB: + + Reports the minimum allowed supply temperature for operation. + + Access: Read + + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/voltage_max, +Date: January 2008 +Contact: linux-pm@vger.kernel.org +Description: + Battery: + + Reports the maximum safe VBAT voltage permitted for the + battery, during charging. + + USB: + + Reports the maximum VBUS voltage the supply can support. + + Access: Read + + Valid values: Represented in microvolts + +What: /sys/class/power_supply/<supply_name>/voltage_min, +Date: January 2008 +Contact: linux-pm@vger.kernel.org +Description: + Battery: + + Reports the minimum safe VBAT voltage permitted for the + battery, during discharging. + + USB: + + Reports the minimum VBUS voltage the supply can support. + + Access: Read + + Valid values: Represented in microvolts + +What: /sys/class/power_supply/<supply_name>/voltage_now, +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Battery: + + Reports an instant, single VBAT voltage reading for the + battery. This value is not averaged/smoothed. + + Access: Read + + USB: + + Reports the VBUS voltage supplied now. This value is generally + read-only reporting, unless the 'online' state of the supply + is set to be programmable, in which case this value can be set + within the reported min/max range. + + Access: Read, Write + + Valid values: Represented in microvolts + +**Battery Properties** What: /sys/class/power_supply/<supply_name>/capacity Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Fine grain representation of battery capacity. + Access: Read + Valid values: 0 - 100 (percent) What: /sys/class/power_supply/<supply_name>/capacity_alert_max @@ -58,6 +282,7 @@ Description: low). Access: Read, Write + Valid values: 0 - 100 (percent) What: /sys/class/power_supply/<supply_name>/capacity_alert_min @@ -72,6 +297,7 @@ Description: critically low). Access: Read, Write + Valid values: 0 - 100 (percent) What: /sys/class/power_supply/<supply_name>/capacity_error_margin @@ -87,6 +313,7 @@ Description: completely useless. Access: Read + Valid values: 0 - 100 (percent) What: /sys/class/power_supply/<supply_name>/capacity_level @@ -96,40 +323,10 @@ Description: Coarse representation of battery capacity. Access: Read - Valid values: "Unknown", "Critical", "Low", "Normal", "High", - "Full" - -What: /sys/class/power_supply/<supply_name>/current_avg -Date: May 2007 -Contact: linux-pm@vger.kernel.org -Description: - Reports an average IBAT current reading for the battery, over a - fixed period. Normally devices will provide a fixed interval in - which they average readings to smooth out the reported value. - - Access: Read - Valid values: Represented in microamps. Negative values are used - for discharging batteries, positive values for charging batteries. -What: /sys/class/power_supply/<supply_name>/current_max -Date: October 2010 -Contact: linux-pm@vger.kernel.org -Description: - Reports the maximum IBAT current allowed into the battery. - - Access: Read - Valid values: Represented in microamps - -What: /sys/class/power_supply/<supply_name>/current_now -Date: May 2007 -Contact: linux-pm@vger.kernel.org -Description: - Reports an instant, single IBAT current reading for the battery. - This value is not averaged/smoothed. - - Access: Read - Valid values: Represented in microamps. Negative values are used - for discharging batteries, positive values for charging batteries. + Valid values: + "Unknown", "Critical", "Low", "Normal", "High", + "Full" What: /sys/class/power_supply/<supply_name>/charge_control_limit Date: Oct 2012 @@ -139,6 +336,7 @@ Description: throttling for thermal cooling or improving battery health. Access: Read, Write + Valid values: Represented in microamps What: /sys/class/power_supply/<supply_name>/charge_control_limit_max @@ -148,6 +346,7 @@ Description: Maximum legal value for the charge_control_limit property. Access: Read + Valid values: Represented in microamps What: /sys/class/power_supply/<supply_name>/charge_control_start_threshold @@ -168,6 +367,7 @@ Description: stop. Access: Read, Write + Valid values: 0 - 100 (percent) What: /sys/class/power_supply/<supply_name>/charge_type @@ -183,7 +383,9 @@ Description: different algorithm. Access: Read, Write - Valid values: "Unknown", "N/A", "Trickle", "Fast", "Standard", + + Valid values: + "Unknown", "N/A", "Trickle", "Fast", "Standard", "Adaptive", "Custom" What: /sys/class/power_supply/<supply_name>/charge_term_current @@ -194,6 +396,7 @@ Description: when the battery is considered full and charging should end. Access: Read + Valid values: Represented in microamps What: /sys/class/power_supply/<supply_name>/health @@ -204,7 +407,9 @@ Description: functionality. Access: Read - Valid values: "Unknown", "Good", "Overheat", "Dead", + + Valid values: + "Unknown", "Good", "Overheat", "Dead", "Over voltage", "Unspecified failure", "Cold", "Watchdog timer expire", "Safety timer expire", "Over current", "Calibration required", "Warm", @@ -218,6 +423,7 @@ Description: for a battery charge cycle. Access: Read + Valid values: Represented in microamps What: /sys/class/power_supply/<supply_name>/present @@ -227,9 +433,13 @@ Description: Reports whether a battery is present or not in the system. Access: Read + Valid values: + + == ======= 0: Absent 1: Present + == ======= What: /sys/class/power_supply/<supply_name>/status Date: May 2007 @@ -240,7 +450,9 @@ Description: used to enable/disable charging to the battery. Access: Read, Write - Valid values: "Unknown", "Charging", "Discharging", + + Valid values: + "Unknown", "Charging", "Discharging", "Not charging", "Full" What: /sys/class/power_supply/<supply_name>/technology @@ -250,66 +462,11 @@ Description: Describes the battery technology supported by the supply. Access: Read - Valid values: "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", - "NiCd", "LiMn" - -What: /sys/class/power_supply/<supply_name>/temp -Date: May 2007 -Contact: linux-pm@vger.kernel.org -Description: - Reports the current TBAT battery temperature reading. - - Access: Read - Valid values: Represented in 1/10 Degrees Celsius - -What: /sys/class/power_supply/<supply_name>/temp_alert_max -Date: July 2012 -Contact: linux-pm@vger.kernel.org -Description: - Maximum TBAT temperature trip-wire value where the supply will - notify user-space of the event. This is normally used for the - battery charging scenario where user-space needs to know the - battery temperature has crossed an upper threshold so it can - take appropriate action (e.g. warning user that battery level is - critically high, and charging has stopped). - - Access: Read - Valid values: Represented in 1/10 Degrees Celsius - -What: /sys/class/power_supply/<supply_name>/temp_alert_min -Date: July 2012 -Contact: linux-pm@vger.kernel.org -Description: - Minimum TBAT temperature trip-wire value where the supply will - notify user-space of the event. This is normally used for the - battery charging scenario where user-space needs to know the - battery temperature has crossed a lower threshold so it can take - appropriate action (e.g. warning user that battery level is - high, and charging current has been reduced accordingly to - remedy the situation). - - Access: Read - Valid values: Represented in 1/10 Degrees Celsius - -What: /sys/class/power_supply/<supply_name>/temp_max -Date: July 2014 -Contact: linux-pm@vger.kernel.org -Description: - Reports the maximum allowed TBAT battery temperature for - charging. - - Access: Read - Valid values: Represented in 1/10 Degrees Celsius -What: /sys/class/power_supply/<supply_name>/temp_min -Date: July 2014 -Contact: linux-pm@vger.kernel.org -Description: - Reports the minimum allowed TBAT battery temperature for - charging. + Valid values: + "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", + "NiCd", "LiMn" - Access: Read - Valid values: Represented in 1/10 Degrees Celsius What: /sys/class/power_supply/<supply_name>/voltage_avg, Date: May 2007 @@ -320,72 +477,10 @@ Description: which they average readings to smooth out the reported value. Access: Read - Valid values: Represented in microvolts - -What: /sys/class/power_supply/<supply_name>/voltage_max, -Date: January 2008 -Contact: linux-pm@vger.kernel.org -Description: - Reports the maximum safe VBAT voltage permitted for the battery, - during charging. - - Access: Read - Valid values: Represented in microvolts - -What: /sys/class/power_supply/<supply_name>/voltage_min, -Date: January 2008 -Contact: linux-pm@vger.kernel.org -Description: - Reports the minimum safe VBAT voltage permitted for the battery, - during discharging. - Access: Read Valid values: Represented in microvolts -What: /sys/class/power_supply/<supply_name>/voltage_now, -Date: May 2007 -Contact: linux-pm@vger.kernel.org -Description: - Reports an instant, single VBAT voltage reading for the battery. - This value is not averaged/smoothed. - - Access: Read - Valid values: Represented in microvolts - -===== USB Properties ===== - -What: /sys/class/power_supply/<supply_name>/current_avg -Date: May 2007 -Contact: linux-pm@vger.kernel.org -Description: - Reports an average IBUS current reading over a fixed period. - Normally devices will provide a fixed interval in which they - average readings to smooth out the reported value. - - Access: Read - Valid values: Represented in microamps - - -What: /sys/class/power_supply/<supply_name>/current_max -Date: October 2010 -Contact: linux-pm@vger.kernel.org -Description: - Reports the maximum IBUS current the supply can support. - - Access: Read - Valid values: Represented in microamps - -What: /sys/class/power_supply/<supply_name>/current_now -Date: May 2007 -Contact: linux-pm@vger.kernel.org -Description: - Reports the IBUS current supplied now. This value is generally - read-only reporting, unless the 'online' state of the supply - is set to be programmable, in which case this value can be set - within the reported min/max range. - - Access: Read, Write - Valid values: Represented in microamps +**USB Properties** What: /sys/class/power_supply/<supply_name>/input_current_limit Date: July 2014 @@ -399,6 +494,7 @@ Description: solved using power limit use input_current_limit. Access: Read, Write + Valid values: Represented in microamps What: /sys/class/power_supply/<supply_name>/input_voltage_limit @@ -416,6 +512,7 @@ Description: solved using power limit use input_voltage_limit. Access: Read, Write + Valid values: Represented in microvolts What: /sys/class/power_supply/<supply_name>/input_power_limit @@ -429,6 +526,7 @@ Description: limit only for problems that can be solved using power limit. Access: Read, Write + Valid values: Represented in microwatts What: /sys/class/power_supply/<supply_name>/online, @@ -441,69 +539,14 @@ Description: USB supply so voltage and current can be controlled). Access: Read, Write + Valid values: + + == ================================================== 0: Offline 1: Online Fixed - Fixed Voltage Supply 2: Online Programmable - Programmable Voltage Supply - -What: /sys/class/power_supply/<supply_name>/temp -Date: May 2007 -Contact: linux-pm@vger.kernel.org -Description: - Reports the current supply temperature reading. This would - normally be the internal temperature of the device itself (e.g - TJUNC temperature of an IC) - - Access: Read - Valid values: Represented in 1/10 Degrees Celsius - -What: /sys/class/power_supply/<supply_name>/temp_alert_max -Date: July 2012 -Contact: linux-pm@vger.kernel.org -Description: - Maximum supply temperature trip-wire value where the supply will - notify user-space of the event. This is normally used for the - charging scenario where user-space needs to know the supply - temperature has crossed an upper threshold so it can take - appropriate action (e.g. warning user that the supply - temperature is critically high, and charging has stopped to - remedy the situation). - - Access: Read - Valid values: Represented in 1/10 Degrees Celsius - -What: /sys/class/power_supply/<supply_name>/temp_alert_min -Date: July 2012 -Contact: linux-pm@vger.kernel.org -Description: - Minimum supply temperature trip-wire value where the supply will - notify user-space of the event. This is normally used for the - charging scenario where user-space needs to know the supply - temperature has crossed a lower threshold so it can take - appropriate action (e.g. warning user that the supply - temperature is high, and charging current has been reduced - accordingly to remedy the situation). - - Access: Read - Valid values: Represented in 1/10 Degrees Celsius - -What: /sys/class/power_supply/<supply_name>/temp_max -Date: July 2014 -Contact: linux-pm@vger.kernel.org -Description: - Reports the maximum allowed supply temperature for operation. - - Access: Read - Valid values: Represented in 1/10 Degrees Celsius - -What: /sys/class/power_supply/<supply_name>/temp_min -Date: July 2014 -Contact: linux-pm@vger.kernel.org -Description: - Reports the mainimum allowed supply temperature for operation. - - Access: Read - Valid values: Represented in 1/10 Degrees Celsius + == ================================================== What: /sys/class/power_supply/<supply_name>/usb_type Date: March 2018 @@ -514,40 +557,12 @@ Description: is attached. Access: Read-Only - Valid values: "Unknown", "SDP", "DCP", "CDP", "ACA", "C", "PD", - "PD_DRP", "PD_PPS", "BrickID" - -What: /sys/class/power_supply/<supply_name>/voltage_max -Date: January 2008 -Contact: linux-pm@vger.kernel.org -Description: - Reports the maximum VBUS voltage the supply can support. - - Access: Read - Valid values: Represented in microvolts - -What: /sys/class/power_supply/<supply_name>/voltage_min -Date: January 2008 -Contact: linux-pm@vger.kernel.org -Description: - Reports the minimum VBUS voltage the supply can support. - Access: Read - Valid values: Represented in microvolts - -What: /sys/class/power_supply/<supply_name>/voltage_now -Date: May 2007 -Contact: linux-pm@vger.kernel.org -Description: - Reports the VBUS voltage supplied now. This value is generally - read-only reporting, unless the 'online' state of the supply - is set to be programmable, in which case this value can be set - within the reported min/max range. - - Access: Read, Write - Valid values: Represented in microvolts + Valid values: + "Unknown", "SDP", "DCP", "CDP", "ACA", "C", "PD", + "PD_DRP", "PD_PPS", "BrickID" -===== Device Specific Properties ===== +**Device Specific Properties** What: /sys/class/power/ds2760-battery.*/charge_now Date: May 2010 @@ -581,6 +596,7 @@ Description: will drop to 0 A) and will trigger interrupt. Valid values: + - 5, 6 or 7 (hours), - 0: disabled. @@ -595,6 +611,7 @@ Description: will drop to 0 A) and will trigger interrupt. Valid values: + - 4 - 16 (hours), step by 2 (rounded down) - 0: disabled. @@ -609,6 +626,7 @@ Description: interrupt and start top-off charging mode. Valid values: + - 100000 - 200000 (microamps), step by 25000 (rounded down) - 200000 - 350000 (microamps), step by 50000 (rounded down) - 0: disabled. @@ -624,6 +642,7 @@ Description: will drop to 0 A) and will trigger interrupt. Valid values: + - 0 - 70 (minutes), step by 10 (rounded down) What: /sys/class/power_supply/bq24257-charger/ovp_voltage @@ -637,6 +656,7 @@ Description: device datasheet for details. Valid values: + - 6000000, 6500000, 7000000, 8000000, 9000000, 9500000, 10000000, 10500000 (all uV) @@ -652,6 +672,7 @@ Description: lower than the set value. See device datasheet for details. Valid values: + - 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000, 4760000 (all uV) @@ -666,6 +687,7 @@ Description: the charger operates normally. See device datasheet for details. Valid values: + - 1: enabled - 0: disabled @@ -681,6 +703,7 @@ Description: from the system. See device datasheet for details. Valid values: + - 1: enabled - 0: disabled @@ -692,6 +715,7 @@ Description: manufactured. Access: Read + Valid values: Reported as integer What: /sys/class/power_supply/<supply_name>/manufacture_month @@ -701,6 +725,7 @@ Description: Reports the month when the device has been manufactured. Access: Read + Valid values: 1-12 What: /sys/class/power_supply/<supply_name>/manufacture_day diff --git a/Documentation/ABI/testing/sysfs-class-power-mp2629 b/Documentation/ABI/testing/sysfs-class-power-mp2629 index 327a07e22805..914d67caac0d 100644 --- a/Documentation/ABI/testing/sysfs-class-power-mp2629 +++ b/Documentation/ABI/testing/sysfs-class-power-mp2629 @@ -5,4 +5,5 @@ Description: Represents a battery impedance compensation to accelerate charging. Access: Read, Write + Valid values: Represented in milli-ohms. Valid range is [0, 140]. diff --git a/Documentation/ABI/testing/sysfs-class-power-twl4030 b/Documentation/ABI/testing/sysfs-class-power-twl4030 index b4fd32d210c5..b52f7023f8ba 100644 --- a/Documentation/ABI/testing/sysfs-class-power-twl4030 +++ b/Documentation/ABI/testing/sysfs-class-power-twl4030 @@ -4,18 +4,20 @@ Description: Writing to this can disable charging. Possible values are: - "auto" - draw power as appropriate for detected - power source and battery status. - "off" - do not draw any power. - "continuous" - - activate mode described as "linear" in - TWL data sheets. This uses whatever - current is available and doesn't switch off - when voltage drops. - This is useful for unstable power sources - such as bicycle dynamo, but care should - be taken that battery is not over-charged. + ============= =========================================== + "auto" draw power as appropriate for detected + power source and battery status. + "off" do not draw any power. + "continuous" activate mode described as "linear" in + TWL data sheets. This uses whatever + current is available and doesn't switch off + when voltage drops. + + This is useful for unstable power sources + such as bicycle dynamo, but care should + be taken that battery is not over-charged. + ============= =========================================== What: /sys/class/power_supply/twl4030_ac/mode Description: @@ -23,6 +25,9 @@ Description: Writing to this can disable charging. Possible values are: - "auto" - draw power as appropriate for detected - power source and battery status. - "off" - do not draw any power. + + ====== =========================================== + "auto" draw power as appropriate for detected + power source and battery status. + "off" do not draw any power. + ====== =========================================== diff --git a/Documentation/ABI/testing/sysfs-class-power-wilco b/Documentation/ABI/testing/sysfs-class-power-wilco index 84fde1d0ada0..82af180fcaab 100644 --- a/Documentation/ABI/testing/sysfs-class-power-wilco +++ b/Documentation/ABI/testing/sysfs-class-power-wilco @@ -4,17 +4,23 @@ KernelVersion: 5.2 Description: What charging algorithm to use: - Standard: Fully charges battery at a standard rate. - Adaptive: Battery settings adaptively optimized based on + Standard: + Fully charges battery at a standard rate. + Adaptive: + Battery settings adaptively optimized based on typical battery usage pattern. - Fast: Battery charges over a shorter period. - Trickle: Extends battery lifespan, intended for users who + Fast: + Battery charges over a shorter period. + Trickle: + Extends battery lifespan, intended for users who primarily use their Chromebook while connected to AC. - Custom: A low and high threshold percentage is specified. + Custom: + A low and high threshold percentage is specified. Charging begins when level drops below charge_control_start_threshold, and ceases when level is above charge_control_end_threshold. - Long Life: Customized charge rate for last longer battery life. + Long Life: + Customized charge rate for last longer battery life. On Wilco device this mode is pre-configured in the factory through EC's private PID. Swiching to a different mode will be denied by Wilco EC when Long Life mode is enabled. diff --git a/Documentation/ABI/testing/sysfs-class-rapidio b/Documentation/ABI/testing/sysfs-class-rapidio index 8716beeb16c1..19aefb21b639 100644 --- a/Documentation/ABI/testing/sysfs-class-rapidio +++ b/Documentation/ABI/testing/sysfs-class-rapidio @@ -6,6 +6,7 @@ Description: The /sys/class/rapidio_port subdirectory contains individual subdirectories named as "rapidioN" where N = mport ID registered with RapidIO subsystem. + NOTE: An mport ID is not a RapidIO destination ID assigned to a given local mport device. @@ -16,7 +17,9 @@ Contact: Matt Porter <mporter@kernel.crashing.org>, Alexandre Bounine <alexandre.bounine@idt.com> Description: (RO) reports RapidIO common transport system size: + 0 = small (8-bit destination ID, max. 256 devices), + 1 = large (16-bit destination ID, max. 65536 devices). What: /sys/class/rapidio_port/rapidioN/port_destid @@ -25,31 +28,32 @@ KernelVersion: v3.15 Contact: Matt Porter <mporter@kernel.crashing.org>, Alexandre Bounine <alexandre.bounine@idt.com> Description: - (RO) reports RapidIO destination ID assigned to the given - RapidIO mport device. If value 0xFFFFFFFF is returned this means - that no valid destination ID have been assigned to the mport - (yet). Normally, before enumeration/discovery have been executed - only fabric enumerating mports have a valid destination ID - assigned to them using "hdid=..." rapidio module parameter. + +(RO) reports RapidIO destination ID assigned to the given +RapidIO mport device. If value 0xFFFFFFFF is returned this means +that no valid destination ID have been assigned to the mport +(yet). Normally, before enumeration/discovery have been executed +only fabric enumerating mports have a valid destination ID +assigned to them using "hdid=..." rapidio module parameter. After enumeration or discovery was performed for a given mport device, the corresponding subdirectory will also contain subdirectories for each child RapidIO device connected to the mport. The example below shows mport device subdirectory with several child RapidIO -devices attached to it. - -[rio@rapidio ~]$ ls /sys/class/rapidio_port/rapidio0/ -l -total 0 -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0001 -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0004 -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0007 -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0002 -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0003 -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0005 -lrwxrwxrwx 1 root root 0 Feb 11 15:11 device -> ../../../0000:01:00.0 --r--r--r-- 1 root root 4096 Feb 11 15:11 port_destid -drwxr-xr-x 2 root root 0 Feb 11 15:11 power -lrwxrwxrwx 1 root root 0 Feb 11 15:04 subsystem -> ../../../../../../class/rapidio_port --r--r--r-- 1 root root 4096 Feb 11 15:11 sys_size --rw-r--r-- 1 root root 4096 Feb 11 15:04 uevent +devices attached to it:: + + [rio@rapidio ~]$ ls /sys/class/rapidio_port/rapidio0/ -l + total 0 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0001 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0004 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0007 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0002 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0003 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0005 + lrwxrwxrwx 1 root root 0 Feb 11 15:11 device -> ../../../0000:01:00.0 + -r--r--r-- 1 root root 4096 Feb 11 15:11 port_destid + drwxr-xr-x 2 root root 0 Feb 11 15:11 power + lrwxrwxrwx 1 root root 0 Feb 11 15:04 subsystem -> ../../../../../../class/rapidio_port + -r--r--r-- 1 root root 4096 Feb 11 15:11 sys_size + -rw-r--r-- 1 root root 4096 Feb 11 15:04 uevent diff --git a/Documentation/ABI/testing/sysfs-class-rc b/Documentation/ABI/testing/sysfs-class-rc index 6c0d6c8cb911..9c8ff7910858 100644 --- a/Documentation/ABI/testing/sysfs-class-rc +++ b/Documentation/ABI/testing/sysfs-class-rc @@ -21,15 +21,22 @@ KernelVersion: 2.6.36 Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Description: Reading this file returns a list of available protocols, - something like: + something like:: + "rc5 [rc6] nec jvc [sony]" + Enabled protocols are shown in [] brackets. + Writing "+proto" will add a protocol to the list of enabled protocols. + Writing "-proto" will remove a protocol from the list of enabled protocols. + Writing "proto" will enable only "proto". + Writing "none" will disable all protocols. + Write fails with EINVAL if an invalid protocol combination or unknown protocol name is used. @@ -39,11 +46,13 @@ KernelVersion: 3.15 Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Description: Sets the scancode filter expected value. + Use in combination with /sys/class/rc/rcN/filter_mask to set the expected value of the bits set in the filter mask. If the hardware supports it then scancodes which do not match the filter will be ignored. Otherwise the write will fail with an error. + This value may be reset to 0 if the current protocol is altered. What: /sys/class/rc/rcN/filter_mask @@ -56,9 +65,11 @@ Description: of the scancode which should be compared against the expected value. A value of 0 disables the filter to allow all valid scancodes to be processed. + If the hardware supports it then scancodes which do not match the filter will be ignored. Otherwise the write will fail with an error. + This value may be reset to 0 if the current protocol is altered. What: /sys/class/rc/rcN/wakeup_protocols @@ -67,15 +78,22 @@ KernelVersion: 4.11 Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Description: Reading this file returns a list of available protocols to use - for the wakeup filter, something like: + for the wakeup filter, something like:: + "rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce" + Note that protocol variants are listed, so "nec", "sony", "rc-5", "rc-6" have their different bit length encodings listed if available. + The enabled wakeup protocol is shown in [] brackets. + Only one protocol can be selected at a time. + Writing "proto" will use "proto" for wakeup events. + Writing "none" will disable wakeup. + Write fails with EINVAL if an invalid protocol combination or unknown protocol name is used, or if wakeup is not supported by the hardware. @@ -86,13 +104,17 @@ KernelVersion: 3.15 Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Description: Sets the scancode wakeup filter expected value. + Use in combination with /sys/class/rc/rcN/wakeup_filter_mask to set the expected value of the bits set in the wakeup filter mask to trigger a system wake event. + If the hardware supports it and wakeup_filter_mask is not 0 then scancodes which match the filter will wake the system from e.g. suspend to RAM or power off. + Otherwise the write will fail with an error. + This value may be reset to 0 if the wakeup protocol is altered. What: /sys/class/rc/rcN/wakeup_filter_mask @@ -101,11 +123,15 @@ KernelVersion: 3.15 Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Description: Sets the scancode wakeup filter mask of bits to compare. + Use in combination with /sys/class/rc/rcN/wakeup_filter to set the bits of the scancode which should be compared against the expected value to trigger a system wake event. + If the hardware supports it and wakeup_filter_mask is not 0 then scancodes which match the filter will wake the system from e.g. suspend to RAM or power off. + Otherwise the write will fail with an error. + This value may be reset to 0 if the wakeup protocol is altered. diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator index bc578bc60628..8516f08806dd 100644 --- a/Documentation/ABI/testing/sysfs-class-regulator +++ b/Documentation/ABI/testing/sysfs-class-regulator @@ -35,13 +35,13 @@ Description: This will be one of the following strings: - off - on - error - fast - normal - idle - standby + - off + - on + - error + - fast + - normal + - idle + - standby "off" means the regulator is not supplying power to the system. @@ -74,9 +74,9 @@ Description: This will be one of the following strings: - 'voltage' - 'current' - 'unknown' + - 'voltage' + - 'current' + - 'unknown' 'voltage' means the regulator output voltage can be controlled by software. @@ -129,11 +129,11 @@ Description: The opmode value can be one of the following strings: - 'fast' - 'normal' - 'idle' - 'standby' - 'unknown' + - 'fast' + - 'normal' + - 'idle' + - 'standby' + - 'unknown' The modes are described in include/linux/regulator/consumer.h @@ -360,9 +360,9 @@ Description: This will be one of the following strings: - 'enabled' - 'disabled' - 'unknown' + - 'enabled' + - 'disabled' + - 'unknown' 'enabled' means the regulator is in bypass mode. diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc b/Documentation/ABI/testing/sysfs-class-remoteproc index 066b9b6f4924..0c9ee55098b8 100644 --- a/Documentation/ABI/testing/sysfs-class-remoteproc +++ b/Documentation/ABI/testing/sysfs-class-remoteproc @@ -16,11 +16,11 @@ Description: Remote processor state Reports the state of the remote processor, which will be one of: - "offline" - "suspended" - "running" - "crashed" - "invalid" + - "offline" + - "suspended" + - "running" + - "crashed" + - "invalid" "offline" means the remote processor is powered off. @@ -38,8 +38,8 @@ Description: Remote processor state Writing this file controls the state of the remote processor. The following states can be written: - "start" - "stop" + - "start" + - "stop" Writing "start" will attempt to start the processor running the firmware indicated by, or written to, diff --git a/Documentation/ABI/testing/sysfs-class-rnbd-client b/Documentation/ABI/testing/sysfs-class-rnbd-client index c084f203b41e..00c0286733d4 100644 --- a/Documentation/ABI/testing/sysfs-class-rnbd-client +++ b/Documentation/ABI/testing/sysfs-class-rnbd-client @@ -5,62 +5,70 @@ Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud Description: Provide information about RNBD-client. All sysfs files that are not read-only provide the usage information on read: - Example: - # cat /sys/class/rnbd-client/ctl/map_device + Example:: - > Usage: echo "sessname=<name of the rtrs session> path=<[srcaddr,]dstaddr> - > [path=<[srcaddr,]dstaddr>] device_path=<full path on remote side> - > [access_mode=<ro|rw|migration>] > map_device - > - > addr ::= [ ip:<ipv4> | ip:<ipv6> | gid:<gid> ] + # cat /sys/class/rnbd-client/ctl/map_device + + > Usage: echo "sessname=<name of the rtrs session> path=<[srcaddr,]dstaddr> + > [path=<[srcaddr,]dstaddr>] device_path=<full path on remote side> + > [access_mode=<ro|rw|migration>] > map_device + > + > addr ::= [ ip:<ipv4> | ip:<ipv6> | gid:<gid> ] What: /sys/class/rnbd-client/ctl/map_device Date: Feb 2020 KernelVersion: 5.7 Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> -Description: Expected format is the following: +Description: Expected format is the following:: - sessname=<name of the rtrs session> - path=<[srcaddr,]dstaddr> [path=<[srcaddr,]dstaddr> ...] - device_path=<full path on remote side> - [access_mode=<ro|rw|migration>] + sessname=<name of the rtrs session> + path=<[srcaddr,]dstaddr> [path=<[srcaddr,]dstaddr> ...] + device_path=<full path on remote side> + [access_mode=<ro|rw|migration>] Where: - sessname: accepts a string not bigger than 256 chars, which identifies - a given session on the client and on the server. - I.e. "clt_hostname-srv_hostname" could be a natural choice. + sessname: + accepts a string not bigger than 256 chars, which identifies + a given session on the client and on the server. + I.e. "clt_hostname-srv_hostname" could be a natural choice. + + path: + describes a connection between the client and the server by + specifying destination and, when required, the source address. + The addresses are to be provided in the following format:: - path: describes a connection between the client and the server by - specifying destination and, when required, the source address. - The addresses are to be provided in the following format: + ip:<IPv6> + ip:<IPv4> + gid:<GID> - ip:<IPv6> - ip:<IPv4> - gid:<GID> + for example:: - for example: + path=ip:10.0.0.66 - path=ip:10.0.0.66 The single addr is treated as the destination. The connection will be established to this server from any client IP address. - path=ip:10.0.0.66,ip:10.0.1.66 + :: + + path=ip:10.0.0.66,ip:10.0.1.66 + First addr is the source address and the second is the destination. If multiple "path=" options are specified multiple connection will be established and data will be sent according to the selected multipath policy (see RTRS mp_policy sysfs entry description). - device_path: Path to the block device on the server side. Path is specified - relative to the directory on server side configured in the - 'dev_search_path' module parameter of the rnbd_server. - The rnbd_server prepends the <device_path> received from client - with <dev_search_path> and tries to open the - <dev_search_path>/<device_path> block device. On success, - a /dev/rnbd<N> device file, a /sys/block/rnbd_client/rnbd<N>/ - directory and an entry in /sys/class/rnbd-client/ctl/devices - will be created. + device_path: + Path to the block device on the server side. Path is specified + relative to the directory on server side configured in the + 'dev_search_path' module parameter of the rnbd_server. + The rnbd_server prepends the <device_path> received from client + with <dev_search_path> and tries to open the + <dev_search_path>/<device_path> block device. On success, + a /dev/rnbd<N> device file, a /sys/block/rnbd_client/rnbd<N>/ + directory and an entry in /sys/class/rnbd-client/ctl/devices + will be created. If 'dev_search_path' contains '%SESSNAME%', then each session can have different devices namespace, e.g. server was configured with @@ -68,11 +76,12 @@ Description: Expected format is the following: client has this string "sessname=blya device_path=sda", then server will try to open: /run/rnbd-devs/blya/sda. - access_mode: the access_mode parameter specifies if the device is to be - mapped as "ro" read-only or "rw" read-write. The server allows - a device to be exported in rw mode only once. The "migration" - access mode has to be specified if a second mapping in read-write - mode is desired. + access_mode: + the access_mode parameter specifies if the device is to be + mapped as "ro" read-only or "rw" read-write. The server allows + a device to be exported in rw mode only once. The "migration" + access mode has to be specified if a second mapping in read-write + mode is desired. By default "rw" is used. @@ -91,7 +100,7 @@ Description: Expected format is the following: is the same as the device name. By extracting the last part of the path the path to the device /dev/<dev-name> can be build. - o /dev/block/$(cat /sys/class/rnbd-client/ctl/devices/<device_id>/dev) + * /dev/block/$(cat /sys/class/rnbd-client/ctl/devices/<device_id>/dev) How to find the <device_id> of the device is described on the next section. @@ -106,6 +115,6 @@ Description: For each device mapped on the client a new symbolic link is created The <device_id> of each device is created as follows: - If the 'device_path' provided during mapping contains slashes ("/"), - they are replaced by exclamation mark ("!") and used as as the - <device_id>. Otherwise, the <device_id> will be the same as the - "device_path" provided. + they are replaced by exclamation mark ("!") and used as as the + <device_id>. Otherwise, the <device_id> will be the same as the + "device_path" provided. diff --git a/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration b/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration index ec950c93e5c6..ee8ed6494a01 100644 --- a/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration +++ b/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration @@ -7,6 +7,7 @@ Description: Attribute for calibrating ST-Ericsson AB8500 Real Time Clock calibrate the AB8500.s 32KHz Real Time Clock. Every 60 seconds the AB8500 will correct the RTC's value by adding to it the value of this attribute. + The range of the attribute is -127 to +127 in units of 30.5 micro-seconds (half-parts-per-million of the 32KHz clock) Users: The /vendor/st-ericsson/base_utilities/core/rtc_calibration diff --git a/Documentation/ABI/testing/sysfs-class-rtrs-client b/Documentation/ABI/testing/sysfs-class-rtrs-client index e7e718db8941..0f7165aab251 100644 --- a/Documentation/ABI/testing/sysfs-class-rtrs-client +++ b/Documentation/ABI/testing/sysfs-class-rtrs-client @@ -10,10 +10,10 @@ Date: Feb 2020 KernelVersion: 5.7 Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> Description: RW, adds a new path (connection) to an existing session. Expected format is the - following: + following:: - <[source addr,]destination addr> - *addr ::= [ ip:<ipv4|ipv6> | gid:<gid> ] + <[source addr,]destination addr> + *addr ::= [ ip:<ipv4|ipv6> | gid:<gid> ] What: /sys/class/rtrs-client/<session-name>/max_reconnect_attempts Date: Feb 2020 @@ -29,10 +29,10 @@ Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud Description: Multipath policy specifies which path should be selected on each IO: round-robin (0): - select path in per CPU round-robin manner. + select path in per CPU round-robin manner. min-inflight (1): - select path with minimum inflights. + select path with minimum inflights. What: /sys/class/rtrs-client/<session-name>/paths/ Date: Feb 2020 @@ -109,8 +109,11 @@ Description: RTRS expects that each HCA IRQ is pinned to a separate CPU. If it's not the case, the processing of an I/O response could be processed on a different CPU than where it was originally submitted. This file shows how many interrupts where generated on a non expected CPU. - "from:" is the CPU on which the IRQ was expected, but not generated. - "to:" is the CPU on which the IRQ was generated, but not expected. + + "from:" + is the CPU on which the IRQ was expected, but not generated. + "to:" + is the CPU on which the IRQ was generated, but not expected. What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/stats/reconnects Date: Feb 2020 @@ -125,7 +128,7 @@ Date: Feb 2020 KernelVersion: 5.7 Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> Description: Contains statistics regarding rdma operations and inflight operations. - The output consists of 6 values: + The output consists of 6 values:: - <read-count> <read-total-size> <write-count> <write-total-size> \ - <inflights> <failovered> + <read-count> <read-total-size> <write-count> \ + <write-total-size> <inflights> <failovered> diff --git a/Documentation/ABI/testing/sysfs-class-scsi_host b/Documentation/ABI/testing/sysfs-class-scsi_host index bafc59fd7b69..7c98d8f43c45 100644 --- a/Documentation/ABI/testing/sysfs-class-scsi_host +++ b/Documentation/ABI/testing/sysfs-class-scsi_host @@ -56,8 +56,9 @@ Description: management) on top, which makes it match the Windows IRST (Intel Rapid Storage Technology) driver settings. This setting is also close to min_power, except that: + a) It does not use host-initiated slumber mode, but it does - allow device-initiated slumber + allow device-initiated slumber b) It does not enable low power device sleep mode (DevSlp). What: /sys/class/scsi_host/hostX/em_message @@ -70,8 +71,8 @@ Description: protocol, writes and reads correspond to the LED message format as defined in the AHCI spec. - The user must turn sw_activity (under /sys/block/*/device/) OFF - it they wish to control the activity LED via the em_message + The user must turn sw_activity (under `/sys/block/*/device/`) + OFF it they wish to control the activity LED via the em_message file. em_message_type: (RO) Displays the current enclosure management diff --git a/Documentation/ABI/testing/sysfs-class-typec b/Documentation/ABI/testing/sysfs-class-typec index b834671522d6..b7794e02ad20 100644 --- a/Documentation/ABI/testing/sysfs-class-typec +++ b/Documentation/ABI/testing/sysfs-class-typec @@ -40,10 +40,13 @@ Description: attribute will not return until the operation has finished. Valid values: - - source (The port will behave as source only DFP port) - - sink (The port will behave as sink only UFP port) - - dual (The port will behave as dual-role-data and + + ====== ============================================== + source (The port will behave as source only DFP port) + sink (The port will behave as sink only UFP port) + dual (The port will behave as dual-role-data and dual-role-power port) + ====== ============================================== What: /sys/class/typec/<port>/vconn_source Date: April 2017 @@ -59,6 +62,7 @@ Description: generates uevent KOBJ_CHANGE. Valid values: + - "no" when the port is not the VCONN Source - "yes" when the port is the VCONN Source @@ -72,6 +76,7 @@ Description: power operation mode should show "usb_power_delivery". Valid values: + - default - 1.5A - 3.0A @@ -191,6 +196,7 @@ Date: April 2017 Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> Description: Shows type of the plug on the cable: + - type-a - Standard A - type-b - Standard B - type-c diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc b/Documentation/ABI/testing/sysfs-class-uwb_rc index a0578751c1e3..6c5dcad21e19 100644 --- a/Documentation/ABI/testing/sysfs-class-uwb_rc +++ b/Documentation/ABI/testing/sysfs-class-uwb_rc @@ -66,11 +66,14 @@ Description: <channel> <type> [<bpst offset>] to start (or stop) scanning on a channel. <type> is one of: - 0 - scan - 1 - scan outside BP - 2 - scan while inactive - 3 - scanning disabled - 4 - scan (with start time of <bpst offset>) + + == ======================================= + 0 scan + 1 scan outside BP + 2 scan while inactive + 3 scanning disabled + 4 scan (with start time of <bpst offset>) + == ======================================= What: /sys/class/uwb_rc/uwbN/mac_address Date: July 2008 diff --git a/Documentation/ABI/testing/sysfs-class-watchdog b/Documentation/ABI/testing/sysfs-class-watchdog index 9860a8b2ba75..585caecda3a5 100644 --- a/Documentation/ABI/testing/sysfs-class-watchdog +++ b/Documentation/ABI/testing/sysfs-class-watchdog @@ -91,10 +91,13 @@ Description: h/w strapping (for WDT2 only). At alternate flash the 'access_cs0' sysfs node provides: - ast2400: a way to get access to the primary SPI flash + + ast2400: + a way to get access to the primary SPI flash chip at CS0 after booting from the alternate chip at CS1. - ast2500: a way to restore the normal address mapping + ast2500: + a way to restore the normal address mapping from (CS0->CS1, CS1->CS0) to (CS0->CS0, CS1->CS1). diff --git a/Documentation/ABI/testing/sysfs-dev b/Documentation/ABI/testing/sysfs-dev index a9f2b8b0530f..d1739063e762 100644 --- a/Documentation/ABI/testing/sysfs-dev +++ b/Documentation/ABI/testing/sysfs-dev @@ -9,9 +9,10 @@ Description: The /sys/dev tree provides a method to look up the sysfs the form "<major>:<minor>". These links point to the corresponding sysfs path for the given device. - Example: - $ readlink /sys/dev/block/8:32 - ../../block/sdc + Example:: + + $ readlink /sys/dev/block/8:32 + ../../block/sdc Entries in /sys/dev/char and /sys/dev/block will be dynamically created and destroyed as devices enter and diff --git a/Documentation/ABI/testing/sysfs-devices-mapping b/Documentation/ABI/testing/sysfs-devices-mapping index 490ccfd67f12..8d202bac9394 100644 --- a/Documentation/ABI/testing/sysfs-devices-mapping +++ b/Documentation/ABI/testing/sysfs-devices-mapping @@ -8,26 +8,27 @@ Description: block. For example, on 4-die Xeon platform with up to 6 IIO stacks per die and, therefore, 6 IIO PMON blocks per die, the mapping of - IIO PMON block 0 exposes as the following: + IIO PMON block 0 exposes as the following:: - $ ls /sys/devices/uncore_iio_0/die* - -r--r--r-- /sys/devices/uncore_iio_0/die0 - -r--r--r-- /sys/devices/uncore_iio_0/die1 - -r--r--r-- /sys/devices/uncore_iio_0/die2 - -r--r--r-- /sys/devices/uncore_iio_0/die3 + $ ls /sys/devices/uncore_iio_0/die* + -r--r--r-- /sys/devices/uncore_iio_0/die0 + -r--r--r-- /sys/devices/uncore_iio_0/die1 + -r--r--r-- /sys/devices/uncore_iio_0/die2 + -r--r--r-- /sys/devices/uncore_iio_0/die3 - $ tail /sys/devices/uncore_iio_0/die* - ==> /sys/devices/uncore_iio_0/die0 <== - 0000:00 - ==> /sys/devices/uncore_iio_0/die1 <== - 0000:40 - ==> /sys/devices/uncore_iio_0/die2 <== - 0000:80 - ==> /sys/devices/uncore_iio_0/die3 <== - 0000:c0 + $ tail /sys/devices/uncore_iio_0/die* + ==> /sys/devices/uncore_iio_0/die0 <== + 0000:00 + ==> /sys/devices/uncore_iio_0/die1 <== + 0000:40 + ==> /sys/devices/uncore_iio_0/die2 <== + 0000:80 + ==> /sys/devices/uncore_iio_0/die3 <== + 0000:c0 - Which means: - IIO PMU 0 on die 0 belongs to PCI RP on bus 0x00, domain 0x0000 - IIO PMU 0 on die 1 belongs to PCI RP on bus 0x40, domain 0x0000 - IIO PMU 0 on die 2 belongs to PCI RP on bus 0x80, domain 0x0000 - IIO PMU 0 on die 3 belongs to PCI RP on bus 0xc0, domain 0x0000 + Which means:: + + IIO PMU 0 on die 0 belongs to PCI RP on bus 0x00, domain 0x0000 + IIO PMU 0 on die 1 belongs to PCI RP on bus 0x40, domain 0x0000 + IIO PMU 0 on die 2 belongs to PCI RP on bus 0x80, domain 0x0000 + IIO PMU 0 on die 3 belongs to PCI RP on bus 0xc0, domain 0x0000 diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory index deef3b5723cf..2da2b1fba2c1 100644 --- a/Documentation/ABI/testing/sysfs-devices-memory +++ b/Documentation/ABI/testing/sysfs-devices-memory @@ -47,16 +47,19 @@ Description: online/offline state of the memory section. When written, root can toggle the the online/offline state of a removable memory section (see removable file description above) - using the following commands. - # echo online > /sys/devices/system/memory/memoryX/state - # echo offline > /sys/devices/system/memory/memoryX/state + using the following commands:: + + # echo online > /sys/devices/system/memory/memoryX/state + # echo offline > /sys/devices/system/memory/memoryX/state For example, if /sys/devices/system/memory/memory22/removable contains a value of 1 and /sys/devices/system/memory/memory22/state contains the string "online" the following command can be executed by - by root to offline that section. - # echo offline > /sys/devices/system/memory/memory22/state + by root to offline that section:: + + # echo offline > /sys/devices/system/memory/memory22/state + Users: hotplug memory remove tools http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils @@ -78,6 +81,7 @@ Description: For example, the following symbolic link is created for memory section 9 on node0: + /sys/devices/system/memory/memory9/node0 -> ../../node/node0 @@ -90,4 +94,5 @@ Description: points to the corresponding /sys/devices/system/memory/memoryY memory section directory. For example, the following symbolic link is created for memory section 9 on node0. + /sys/devices/system/node/node0/memory9 -> ../../memory/memory9 diff --git a/Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD b/Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD index 7e43cdce9a52..f7b360a61b21 100644 --- a/Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD +++ b/Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD @@ -7,6 +7,7 @@ Description: (RO) Hexadecimal bitmask of the TAD attributes are reported by the platform firmware (see ACPI 6.2, section 9.18.2): + ======= ====================================================== BIT(0): AC wakeup implemented if set BIT(1): DC wakeup implemented if set BIT(2): Get/set real time features implemented if set @@ -16,6 +17,7 @@ Description: BIT(6): The AC timer wakes up from S5 if set BIT(7): The DC timer wakes up from S4 if set BIT(8): The DC timer wakes up from S5 if set + ======= ====================================================== The other bits are reserved. @@ -62,9 +64,11 @@ Description: timer status with the following meaning of bits (see ACPI 6.2, Section 9.18.5): + ======= ====================================================== Bit(0): The timer has expired if set. Bit(1): The timer has woken up the system from a sleep state (S3 or S4/S5 if supported) if set. + ======= ====================================================== The other bits are reserved. diff --git a/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget b/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget index d548eaac230a..40f29a01fd14 100644 --- a/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget +++ b/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget @@ -3,8 +3,9 @@ Date: April 2010 Contact: Fabien Chouteau <fabien.chouteau@barco.com> Description: Show the suspend state of an USB composite gadget. - 1 -> suspended - 0 -> resumed + + - 1 -> suspended + - 0 -> resumed (_UDC_ is the name of the USB Device Controller driver) @@ -17,5 +18,6 @@ Description: Storage mode. Possible values are: - 1 -> ignore the FUA flag - 0 -> obey the FUA flag + + - 1 -> ignore the FUA flag + - 0 -> obey the FUA flag diff --git a/Documentation/ABI/testing/sysfs-devices-platform-docg3 b/Documentation/ABI/testing/sysfs-devices-platform-docg3 index 8aa36716882f..378c42694bfb 100644 --- a/Documentation/ABI/testing/sysfs-devices-platform-docg3 +++ b/Documentation/ABI/testing/sysfs-devices-platform-docg3 @@ -9,8 +9,10 @@ Description: The protection has information embedded whether it blocks reads, writes or both. The result is: - 0 -> the DPS is not keylocked - 1 -> the DPS is keylocked + + - 0 -> the DPS is not keylocked + - 1 -> the DPS is keylocked + Users: None identified so far. What: /sys/devices/platform/docg3/f[0-3]_dps[01]_protection_key @@ -27,8 +29,12 @@ Description: Entering the correct value toggle the lock, and can be observed through f[0-3]_dps[01]_is_keylocked. Possible values are: + - 8 bytes + Typical values are: + - "00000000" - "12345678" + Users: None identified so far. diff --git a/Documentation/ABI/testing/sysfs-devices-platform-ipmi b/Documentation/ABI/testing/sysfs-devices-platform-ipmi index afb5db856e1c..07df0ddc0b69 100644 --- a/Documentation/ABI/testing/sysfs-devices-platform-ipmi +++ b/Documentation/ABI/testing/sysfs-devices-platform-ipmi @@ -123,38 +123,40 @@ KernelVersion: v4.15 Contact: openipmi-developer@lists.sourceforge.net Description: - idles: (RO) Number of times the interface was + ====================== ======================================== + idles (RO) Number of times the interface was idle while being polled. - watchdog_pretimeouts: (RO) Number of watchdog pretimeouts. + watchdog_pretimeouts (RO) Number of watchdog pretimeouts. - complete_transactions: (RO) Number of completed messages. + complete_transactions (RO) Number of completed messages. - events: (RO) Number of IPMI events received from + events (RO) Number of IPMI events received from the hardware. - interrupts: (RO) Number of interrupts the driver + interrupts (RO) Number of interrupts the driver handled. - hosed_count: (RO) Number of times the hardware didn't + hosed_count (RO) Number of times the hardware didn't follow the state machine. - long_timeouts: (RO) Number of times the driver + long_timeouts (RO) Number of times the driver requested a timer while nothing was in progress. - flag_fetches: (RO) Number of times the driver + flag_fetches (RO) Number of times the driver requested flags from the hardware. - attentions: (RO) Number of time the driver got an + attentions (RO) Number of time the driver got an ATTN from the hardware. - incoming_messages: (RO) Number of asynchronous messages + incoming_messages (RO) Number of asynchronous messages received. - short_timeouts: (RO) Number of times the driver + short_timeouts (RO) Number of times the driver requested a timer while an operation was in progress. + ====================== ======================================== What: /sys/devices/platform/ipmi_si.*/interrupts_enabled @@ -201,38 +203,40 @@ Date: Sep, 2017 KernelVersion: v4.15 Contact: openipmi-developer@lists.sourceforge.net Description: - hosed: (RO) Number of times the hardware didn't + ====================== ======================================== + hosed (RO) Number of times the hardware didn't follow the state machine. - alerts: (RO) Number of alerts received. + alerts (RO) Number of alerts received. - sent_messages: (RO) Number of total messages sent. + sent_messages (RO) Number of total messages sent. - sent_message_parts: (RO) Number of message parts sent. + sent_message_parts (RO) Number of message parts sent. Messages may be broken into parts if they are long. - received_messages: (RO) Number of message responses + received_messages (RO) Number of message responses received. - received_message_parts: (RO) Number of message fragments + received_message_parts (RO) Number of message fragments received. - events: (RO) Number of received events. + events (RO) Number of received events. - watchdog_pretimeouts: (RO) Number of watchdog pretimeouts. + watchdog_pretimeouts (RO) Number of watchdog pretimeouts. - flag_fetches: (RO) Number of times a flag fetch was + flag_fetches (RO) Number of times a flag fetch was requested. - send_retries: (RO) Number of time a message was + send_retries (RO) Number of time a message was retried. - receive_retries: (RO) Number of times the receive of a + receive_retries (RO) Number of times the receive of a message was retried. - send_errors: (RO) Number of times the send of a + send_errors (RO) Number of times the send of a message failed. - receive_errors: (RO) Number of errors in receiving + receive_errors (RO) Number of errors in receiving messages. + ====================== ======================================== diff --git a/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb b/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb index 2107082426da..e45ac2e865d5 100644 --- a/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb +++ b/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb @@ -17,10 +17,10 @@ Description: to overlay planes. Selects the composition mode for the overlay. Possible values - are + are: - 0 - Alpha Blending - 1 - ROP3 + - 0 - Alpha Blending + - 1 - ROP3 What: /sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_position Date: May 2012 @@ -30,7 +30,7 @@ Description: to overlay planes. Stores the x,y overlay position on the display in pixels. The - position format is `[0-9]+,[0-9]+'. + position format is `[0-9]+,[0-9]+`. What: /sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_rop3 Date: May 2012 diff --git a/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu index a8daceb4a956..ee253b033280 100644 --- a/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu +++ b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu @@ -102,6 +102,8 @@ Description: b[15:0] inform firmware the current software execution stage. + + == =========================================== 0 the first stage bootloader didn't run or didn't reach the point of launching second stage bootloader. @@ -111,21 +113,29 @@ Description: 2 both first and second stage bootloader ran and the operating system launch was attempted. + == =========================================== b[16] + == =========================================== 1 firmware to reset current image retry counter. 0 no action. + == =========================================== b[17] + == =========================================== 1 firmware to clear RSU log 0 no action. + == =========================================== b[18] this is negative logic + + == =========================================== 1 no action 0 firmware record the notify code defined in b[15:0]. + == =========================================== What: /sys/devices/platform/stratix10-rsu.0/dcmf0 Date: June 2020 diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index b555df825447..1a04ca8162ad 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -151,23 +151,28 @@ Description: The processor idle states which are available for use have the following attributes: - name: (RO) Name of the idle state (string). + ======== ==== ================================================= + name: (RO) Name of the idle state (string). latency: (RO) The latency to exit out of this idle state (in - microseconds). + microseconds). - power: (RO) The power consumed while in this idle state (in - milliwatts). + power: (RO) The power consumed while in this idle state (in + milliwatts). - time: (RO) The total time spent in this idle state (in microseconds). + time: (RO) The total time spent in this idle state + (in microseconds). - usage: (RO) Number of times this state was entered (a count). + usage: (RO) Number of times this state was entered (a count). - above: (RO) Number of times this state was entered, but the - observed CPU idle duration was too short for it (a count). + above: (RO) Number of times this state was entered, but the + observed CPU idle duration was too short for it + (a count). - below: (RO) Number of times this state was entered, but the - observed CPU idle duration was too long for it (a count). + below: (RO) Number of times this state was entered, but the + observed CPU idle duration was too long for it + (a count). + ======== ==== ================================================= What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/desc Date: February 2008 @@ -290,6 +295,7 @@ Description: Processor frequency boosting control This switch controls the boost setting for the whole system. Boosting allows the CPU and the firmware to run at a frequency beyound it's nominal limit. + More details can be found in Documentation/admin-guide/pm/cpufreq.rst @@ -337,43 +343,57 @@ Contact: Sudeep Holla <sudeep.holla@arm.com> Description: Parameters for the CPU cache attributes allocation_policy: - - WriteAllocate: allocate a memory location to a cache line - on a cache miss because of a write - - ReadAllocate: allocate a memory location to a cache line + - WriteAllocate: + allocate a memory location to a cache line + on a cache miss because of a write + - ReadAllocate: + allocate a memory location to a cache line on a cache miss because of a read - - ReadWriteAllocate: both writeallocate and readallocate + - ReadWriteAllocate: + both writeallocate and readallocate - attributes: LEGACY used only on IA64 and is same as write_policy + attributes: + LEGACY used only on IA64 and is same as write_policy - coherency_line_size: the minimum amount of data in bytes that gets + coherency_line_size: + the minimum amount of data in bytes that gets transferred from memory to cache - level: the cache hierarchy in the multi-level cache configuration + level: + the cache hierarchy in the multi-level cache configuration - number_of_sets: total number of sets in the cache, a set is a + number_of_sets: + total number of sets in the cache, a set is a collection of cache lines with the same cache index - physical_line_partition: number of physical cache line per cache tag + physical_line_partition: + number of physical cache line per cache tag - shared_cpu_list: the list of logical cpus sharing the cache + shared_cpu_list: + the list of logical cpus sharing the cache - shared_cpu_map: logical cpu mask containing the list of cpus sharing + shared_cpu_map: + logical cpu mask containing the list of cpus sharing the cache - size: the total cache size in kB + size: + the total cache size in kB type: - Instruction: cache that only holds instructions - Data: cache that only caches data - Unified: cache that holds both data and instructions - ways_of_associativity: degree of freedom in placing a particular block - of memory in the cache + ways_of_associativity: + degree of freedom in placing a particular block + of memory in the cache write_policy: - - WriteThrough: data is written to both the cache line + - WriteThrough: + data is written to both the cache line and to the block in the lower-level memory - - WriteBack: data is written only to the cache line and + - WriteBack: + data is written only to the cache line and the modified cache line is written to main memory only when it is replaced @@ -414,30 +434,30 @@ Description: POWERNV CPUFreq driver's frequency throttle stats directory and throttle attributes exported in the 'throttle_stats' directory: - turbo_stat : This file gives the total number of times the max - frequency is throttled to lower frequency in turbo (at and above - nominal frequency) range of frequencies. + frequency is throttled to lower frequency in turbo (at and above + nominal frequency) range of frequencies. - sub_turbo_stat : This file gives the total number of times the - max frequency is throttled to lower frequency in sub-turbo(below - nominal frequency) range of frequencies. + max frequency is throttled to lower frequency in sub-turbo(below + nominal frequency) range of frequencies. - unthrottle : This file gives the total number of times the max - frequency is unthrottled after being throttled. + frequency is unthrottled after being throttled. - powercap : This file gives the total number of times the max - frequency is throttled due to 'Power Capping'. + frequency is throttled due to 'Power Capping'. - overtemp : This file gives the total number of times the max - frequency is throttled due to 'CPU Over Temperature'. + frequency is throttled due to 'CPU Over Temperature'. - supply_fault : This file gives the total number of times the - max frequency is throttled due to 'Power Supply Failure'. + max frequency is throttled due to 'Power Supply Failure'. - overcurrent : This file gives the total number of times the - max frequency is throttled due to 'Overcurrent'. + max frequency is throttled due to 'Overcurrent'. - occ_reset : This file gives the total number of times the max - frequency is throttled due to 'OCC Reset'. + frequency is throttled due to 'OCC Reset'. The sysfs attributes representing different throttle reasons like powercap, overtemp, supply_fault, overcurrent and occ_reset map to @@ -469,8 +489,9 @@ What: /sys/devices/system/cpu/cpuX/regs/ Date: June 2016 Contact: Linux ARM Kernel Mailing list <linux-arm-kernel@lists.infradead.org> Description: AArch64 CPU registers + 'identification' directory exposes the CPU ID registers for - identifying model and revision of the CPU. + identifying model and revision of the CPU. What: /sys/devices/system/cpu/cpu#/cpu_capacity Date: December 2016 @@ -497,9 +518,11 @@ Description: Information about CPU vulnerabilities vulnerabilities. The output of those files reflects the state of the CPUs in the system. Possible output values: + ================ ============================================== "Not affected" CPU is not affected by the vulnerability "Vulnerable" CPU is affected and no mitigation in effect "Mitigation: $M" CPU is affected and mitigation $M is in effect + ================ ============================================== See also: Documentation/admin-guide/hw-vuln/index.rst @@ -515,12 +538,14 @@ Description: Control Symetric Multi Threading (SMT) control: Read/write interface to control SMT. Possible values: + ================ ========================================= "on" SMT is enabled "off" SMT is disabled "forceoff" SMT is force disabled. Cannot be changed. "notsupported" SMT is not supported by the CPU "notimplemented" SMT runtime toggling is not implemented for the architecture + ================ ========================================= If control status is "forceoff" or "notsupported" writes are rejected. @@ -576,7 +601,7 @@ Description: Secure Virtual Machine Facility in POWER9 and newer processors. i.e., it is a Secure Virtual Machine. -What: /sys/devices/system/cpu/cpuX/purr +What: /sys/devices/system/cpu/cpuX/purr Date: Apr 2005 Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> Description: PURR ticks for this CPU since the system boot. diff --git a/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl b/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl index 470def06ab0a..1a8ee26e92ae 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl +++ b/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl @@ -5,8 +5,10 @@ Contact: Vernon Mauery <vernux@us.ibm.com> Description: The state file allows a means by which to change in and out of Premium Real-Time Mode (PRTM), as well as the ability to query the current state. - 0 => PRTM off - 1 => PRTM enabled + + - 0 => PRTM off + - 1 => PRTM enabled + Users: The ibm-prtm userspace daemon uses this interface. diff --git a/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator b/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator index 4d63a7904b94..42214b4ff14a 100644 --- a/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator +++ b/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator @@ -6,11 +6,13 @@ Description: Read/write the current state of DDR Backup Mode, which controls if DDR power rails will be kept powered during system suspend. ("on"/"1" = enabled, "off"/"0" = disabled). Two types of power switches (or control signals) can be used: + A. With a momentary power switch (or pulse signal), DDR Backup Mode is enabled by default when available, as the PMIC will be configured only during system suspend. B. With a toggle power switch (or level signal), the following steps must be followed exactly: + 1. Configure PMIC for backup mode, to change the role of the accessory power switch from a power switch to a wake-up switch, @@ -20,8 +22,10 @@ Description: Read/write the current state of DDR Backup Mode, which controls 3. Suspend system, 4. Switch accessory power switch on, to resume the system. + DDR Backup Mode must be explicitly enabled by the user, to invoke step 1. + See also Documentation/devicetree/bindings/mfd/bd9571mwv.txt. Users: User space applications for embedded boards equipped with a BD9571MWV PMIC. diff --git a/Documentation/ABI/testing/sysfs-driver-genwqe b/Documentation/ABI/testing/sysfs-driver-genwqe index 64ac6d567c4b..69d855dc4c47 100644 --- a/Documentation/ABI/testing/sysfs-driver-genwqe +++ b/Documentation/ABI/testing/sysfs-driver-genwqe @@ -29,8 +29,12 @@ What: /sys/class/genwqe/genwqe<n>_card/reload_bitstream Date: May 2014 Contact: klebers@linux.vnet.ibm.com Description: Interface to trigger a PCIe card reset to reload the bitstream. + + :: + sudo sh -c 'echo 1 > \ /sys/class/genwqe/genwqe0_card/reload_bitstream' + If successfully, the card will come back with the bitstream set on 'next_bitstream'. @@ -64,8 +68,11 @@ Description: Base clock frequency of the card. What: /sys/class/genwqe/genwqe<n>_card/device/sriov_numvfs Date: Oct 2013 Contact: haver@linux.vnet.ibm.com -Description: Enable VFs (1..15): +Description: Enable VFs (1..15):: + sudo sh -c 'echo 15 > \ /sys/bus/pci/devices/0000\:1b\:00.0/sriov_numvfs' - Disable VFs: + + Disable VFs:: + Write a 0 into the same sysfs entry. diff --git a/Documentation/ABI/testing/sysfs-driver-hid-lenovo b/Documentation/ABI/testing/sysfs-driver-hid-lenovo index 53a0725962e1..aee85ca1f6be 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-lenovo +++ b/Documentation/ABI/testing/sysfs-driver-hid-lenovo @@ -3,14 +3,18 @@ Date: July 2011 Contact: linux-input@vger.kernel.org Description: This controls if mouse clicks should be generated if the trackpoint is quickly pressed. How fast this press has to be is being controlled by press_speed. + Values are 0 or 1. + Applies to Thinkpad USB Keyboard with TrackPoint. What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/dragging Date: July 2011 Contact: linux-input@vger.kernel.org Description: If this setting is enabled, it is possible to do dragging by pressing the trackpoint. This requires press_to_select to be enabled. + Values are 0 or 1. + Applies to Thinkpad USB Keyboard with TrackPoint. What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/release_to_select @@ -25,7 +29,9 @@ Date: July 2011 Contact: linux-input@vger.kernel.org Description: This setting controls if the mouse click events generated by pressing the trackpoint (if press_to_select is enabled) generate a left or right mouse button click. + Values are 0 or 1. + Applies to Thinkpad USB Keyboard with TrackPoint. What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/sensitivity @@ -39,12 +45,16 @@ What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid- Date: July 2011 Contact: linux-input@vger.kernel.org Description: This setting controls how fast the trackpoint needs to be pressed to generate a mouse click if press_to_select is enabled. + Values are decimal integers from 1 (slowest) to 255 (fastest). + Applies to Thinkpad USB Keyboard with TrackPoint. What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/fn_lock Date: July 2014 Contact: linux-input@vger.kernel.org Description: This setting controls whether Fn Lock is enabled on the keyboard (i.e. if F1 is Mute or F1) + Values are 0 or 1 + Applies to ThinkPad Compact (USB|Bluetooth) Keyboard with TrackPoint. diff --git a/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff b/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff index 305dffd229a8..de07be314efc 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff +++ b/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff @@ -12,7 +12,9 @@ KernelVersion: 4.1 Contact: Michal Malý <madcatxster@devoid-pointer.net> Description: Displays a set of alternate modes supported by a wheel. Each mode is listed as follows: + Tag: Mode Name + Currently active mode is marked with an asterisk. List also contains an abstract item "native" which always denotes the native mode of the wheel. Echoing the mode tag switches the @@ -24,24 +26,30 @@ Description: Displays a set of alternate modes supported by a wheel. Each This entry is not created for devices that have only one mode. Currently supported mode switches: - Driving Force Pro: + + Driving Force Pro:: + DF-EX --> DFP - G25: + G25:: + DF-EX --> DFP --> G25 - G27: + G27:: + DF-EX <*> DFP <-> G25 <-> G27 DF-EX <*--------> G25 <-> G27 DF-EX <*----------------> G27 - G29: + G29:: + DF-EX <*> DFP <-> G25 <-> G27 <-> G29 DF-EX <*--------> G25 <-> G27 <-> G29 DF-EX <*----------------> G27 <-> G29 DF-EX <*------------------------> G29 - DFGT: + DFGT:: + DF-EX <*> DFP <-> DFGT DF-EX <*--------> DFGT diff --git a/Documentation/ABI/testing/sysfs-driver-hid-ntrig b/Documentation/ABI/testing/sysfs-driver-hid-ntrig index e574a5625efe..0e323a5cec6c 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-ntrig +++ b/Documentation/ABI/testing/sysfs-driver-hid-ntrig @@ -29,12 +29,13 @@ Contact: linux-input@vger.kernel.org Description: Threholds to override activation slack. - activation_width: (RW) Width threshold to immediately + ================= ===================================== + activation_width (RW) Width threshold to immediately start processing touch events. - activation_height: (RW) Height threshold to immediately + activation_height (RW) Height threshold to immediately start processing touch events. - + ================= ===================================== What: /sys/bus/hid/drivers/ntrig/<dev>/min_width What: /sys/bus/hid/drivers/ntrig/<dev>/min_height @@ -44,11 +45,13 @@ Contact: linux-input@vger.kernel.org Description: Minimum size contact accepted. - min_width: (RW) Minimum touch contact width to decide + ========== =========================================== + min_width (RW) Minimum touch contact width to decide activation and activity. - min_height: (RW) Minimum touch contact height to decide + min_height (RW) Minimum touch contact height to decide activation and activity. + ========== =========================================== What: /sys/bus/hid/drivers/ntrig/<dev>/sensor_physical_width diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone index 8f7982c70d72..11cd9bf0ad18 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone @@ -3,17 +3,21 @@ Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: It is possible to switch the dpi setting of the mouse with the press of a button. + When read, this file returns the raw number of the actual dpi setting reported by the mouse. This number has to be further processed to receive the real dpi value: + ===== ===== VALUE DPI + ===== ===== 1 800 2 1200 3 1600 4 2000 5 2400 6 3200 + ===== ===== This file is readonly. Users: http://roccat.sourceforge.net @@ -22,6 +26,7 @@ What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid- Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: When read, this file returns the number of the actual profile. + This file is readonly. Users: http://roccat.sourceforge.net @@ -33,6 +38,7 @@ Description: When read, this file returns the raw integer version number of the further usage in other programs. To receive the real version number the decimal point has to be shifted 2 positions to the left. E.g. a returned value of 138 means 1.38 + This file is readonly. Users: http://roccat.sourceforge.net @@ -43,10 +49,13 @@ Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile holds information like button mappings, sensitivity, the colors of the 5 leds and light effects. + When read, these files return the respective profile. The returned data is 975 bytes in size. + When written, this file lets one write the respective profile data back to the mouse. The data has to be 975 bytes long. + The mouse will reject invalid data, whereas the profile number stored in the profile doesn't need to fit the number of the store. @@ -58,6 +67,7 @@ Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: When read, this file returns the settings stored in the mouse. The size of the data is 36 bytes and holds information like the startup_profile, tcu state and calibration_data. + When written, this file lets write settings back to the mouse. The data has to be 36 bytes long. The mouse will reject invalid data. @@ -67,8 +77,10 @@ What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid- Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The integer value of this attribute ranges from 1 to 5. + When read, this attribute returns the number of the profile that's active when the mouse is powered on. + When written, this file sets the number of the startup profile and the mouse activates this profile immediately. Users: http://roccat.sourceforge.net @@ -80,9 +92,12 @@ Description: The mouse has a "Tracking Control Unit" which lets the user calibrate the laser power to fit the mousepad surface. When read, this file returns the current state of the TCU, where 0 means off and 1 means on. + Writing 0 in this file will switch the TCU off. + Writing 1 in this file will start the calibration which takes around 6 seconds to complete and activates the TCU. + Users: http://roccat.sourceforge.net What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/weight @@ -93,14 +108,18 @@ Description: The mouse can be equipped with one of four supplied weights and its value can be read out. When read, this file returns the raw value returned by the mouse which eases further processing in other software. + The values map to the weights as follows: + ===== ====== VALUE WEIGHT + ===== ====== 0 none 1 5g 2 10g 3 15g 4 20g + ===== ====== This file is readonly. Users: http://roccat.sourceforge.net diff --git a/Documentation/ABI/testing/sysfs-driver-hid-wiimote b/Documentation/ABI/testing/sysfs-driver-hid-wiimote index 39dfa5cb1cc5..3bf43d9dcdfe 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-wiimote +++ b/Documentation/ABI/testing/sysfs-driver-hid-wiimote @@ -20,6 +20,7 @@ Description: This file contains the currently connected and initialized the official Nintendo Nunchuck extension and classic is the Nintendo Classic Controller extension. The motionp extension can be combined with the other two. + Starting with kernel-version 3.11 Motion Plus hotplugging is supported and if detected, it's no longer reported as static extension. You will get uevent notifications for the motion-plus @@ -39,9 +40,13 @@ Description: While a device is initialized by the wiimote driver, we perform Other strings for each device-type are available and may be added if new device-specific detections are added. Currently supported are: - gen10: First Wii Remote generation - gen20: Second Wii Remote Plus generation (builtin MP) + + ============= ======================================= + gen10: First Wii Remote generation + gen20: Second Wii Remote Plus generation + (builtin MP) balanceboard: Wii Balance Board + ============= ======================================= What: /sys/bus/hid/drivers/wiimote/<dev>/bboard_calib Date: May 2013 @@ -54,6 +59,7 @@ Description: This attribute is only provided if the device was detected as a First, 0kg values for all 4 sensors are written, followed by the 17kg values for all 4 sensors and last the 34kg values for all 4 sensors. + Calibration data is already applied by the kernel to all input values but may be used by user-space to perform other transformations. @@ -68,9 +74,11 @@ Description: This attribute is only provided if the device was detected as a is prefixed with a +/-. Each value is a signed 16bit number. Data is encoded as decimal numbers and specifies the offsets of the analog sticks of the pro-controller. + Calibration data is already applied by the kernel to all input values but may be used by user-space to perform other transformations. + Calibration data is detected by the kernel during device setup. You can write "scan\n" into this file to re-trigger calibration. You can also write data directly in the form "x1:y1 x2:y2" to diff --git a/Documentation/ABI/testing/sysfs-driver-input-exc3000 b/Documentation/ABI/testing/sysfs-driver-input-exc3000 index 3d316d54f81c..cd7c578aef2c 100644 --- a/Documentation/ABI/testing/sysfs-driver-input-exc3000 +++ b/Documentation/ABI/testing/sysfs-driver-input-exc3000 @@ -4,6 +4,7 @@ Contact: linux-input@vger.kernel.org Description: Reports the firmware version provided by the touchscreen, for example "00_T6" on a EXC80H60 Access: Read + Valid values: Represented as string What: /sys/bus/i2c/devices/xxx/model @@ -12,4 +13,5 @@ Contact: linux-input@vger.kernel.org Description: Reports the model identification provided by the touchscreen, for example "Orion_1320" on a EXC80H60 Access: Read + Valid values: Represented as string diff --git a/Documentation/ABI/testing/sysfs-driver-jz4780-efuse b/Documentation/ABI/testing/sysfs-driver-jz4780-efuse index bb6f5d6ceea0..4cf595d681e6 100644 --- a/Documentation/ABI/testing/sysfs-driver-jz4780-efuse +++ b/Documentation/ABI/testing/sysfs-driver-jz4780-efuse @@ -4,7 +4,9 @@ Contact: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Description: read-only access to the efuse on the Ingenic JZ4780 SoC The SoC has a one time programmable 8K efuse that is split into segments. The driver supports read only. - The segments are + The segments are: + + ===== ======== ================= 0x000 64 bit Random Number 0x008 128 bit Ingenic Chip ID 0x018 128 bit Customer ID @@ -12,5 +14,7 @@ Description: read-only access to the efuse on the Ingenic JZ4780 SoC 0x1E0 8 bit Protect Segment 0x1E1 2296 bit HDMI Key 0x300 2048 bit Security boot key + ===== ======== ================= + Users: any user space application which wants to read the Chip and Customer ID diff --git a/Documentation/ABI/testing/sysfs-driver-pciback b/Documentation/ABI/testing/sysfs-driver-pciback index 73308c2b81b0..49f5fd0c8bbd 100644 --- a/Documentation/ABI/testing/sysfs-driver-pciback +++ b/Documentation/ABI/testing/sysfs-driver-pciback @@ -7,8 +7,10 @@ Description: the format of DDDD:BB:DD.F-REG:SIZE:MASK will allow the guest to write and read from the PCI device. That is Domain:Bus: Device.Function-Register:Size:Mask (Domain is optional). - For example: - #echo 00:19.0-E0:2:FF > /sys/bus/pci/drivers/pciback/quirks + For example:: + + #echo 00:19.0-E0:2:FF > /sys/bus/pci/drivers/pciback/quirks + will allow the guest to read and write to the configuration register 0x0E. diff --git a/Documentation/ABI/testing/sysfs-driver-samsung-laptop b/Documentation/ABI/testing/sysfs-driver-samsung-laptop index 34d3a3359cf4..28c9c040de5d 100644 --- a/Documentation/ABI/testing/sysfs-driver-samsung-laptop +++ b/Documentation/ABI/testing/sysfs-driver-samsung-laptop @@ -9,10 +9,12 @@ Description: Some Samsung laptops have different "performance levels" their fans quiet at all costs. Reading from this file will show the current performance level. Writing to the file can change this value. + Valid options: - "silent" - "normal" - "overclock" + - "silent" + - "normal" + - "overclock" + Note that not all laptops support all of these options. Specifically, not all support the "overclock" option, and it's still unknown if this value even changes @@ -25,8 +27,9 @@ Contact: Corentin Chary <corentin.chary@gmail.com> Description: Max battery charge level can be modified, battery cycle life can be extended by reducing the max battery charge level. - 0 means normal battery mode (100% charge) - 1 means battery life extender mode (80% charge) + + - 0 means normal battery mode (100% charge) + - 1 means battery life extender mode (80% charge) What: /sys/devices/platform/samsung/usb_charge Date: December 1, 2011 diff --git a/Documentation/ABI/testing/sysfs-driver-toshiba_acpi b/Documentation/ABI/testing/sysfs-driver-toshiba_acpi index f34221b52b14..e5a438d84e1f 100644 --- a/Documentation/ABI/testing/sysfs-driver-toshiba_acpi +++ b/Documentation/ABI/testing/sysfs-driver-toshiba_acpi @@ -4,10 +4,12 @@ KernelVersion: 3.15 Contact: Azael Avalos <coproscefalo@gmail.com> Description: This file controls the keyboard backlight operation mode, valid values are: + * 0x1 -> FN-Z * 0x2 -> AUTO (also called TIMER) * 0x8 -> ON * 0x10 -> OFF + Note that from kernel 3.16 onwards this file accepts all listed parameters, kernel 3.15 only accepts the first two (FN-Z and AUTO). @@ -41,8 +43,10 @@ KernelVersion: 3.15 Contact: Azael Avalos <coproscefalo@gmail.com> Description: This files controls the status of the touchpad and pointing stick (if available), valid values are: + * 0 -> OFF * 1 -> ON + Users: KToshiba What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/available_kbd_modes @@ -51,10 +55,12 @@ KernelVersion: 3.16 Contact: Azael Avalos <coproscefalo@gmail.com> Description: This file shows the supported keyboard backlight modes the system supports, which can be: + * 0x1 -> FN-Z * 0x2 -> AUTO (also called TIMER) * 0x8 -> ON * 0x10 -> OFF + Note that not all keyboard types support the listed modes. See the entry named "available_kbd_modes" Users: KToshiba @@ -65,6 +71,7 @@ KernelVersion: 3.16 Contact: Azael Avalos <coproscefalo@gmail.com> Description: This file shows the current keyboard backlight type, which can be: + * 1 -> Type 1, supporting modes FN-Z and AUTO * 2 -> Type 2, supporting modes TIMER, ON and OFF Users: KToshiba @@ -75,10 +82,12 @@ KernelVersion: 4.0 Contact: Azael Avalos <coproscefalo@gmail.com> Description: This file controls the USB Sleep & Charge charging mode, which can be: + * 0 -> Disabled (0x00) * 1 -> Alternate (0x09) * 2 -> Auto (0x21) * 3 -> Typical (0x11) + Note that from kernel 4.1 onwards this file accepts all listed values, kernel 4.0 only supports the first three. Note that this feature only works when connected to power, if @@ -93,8 +102,10 @@ Contact: Azael Avalos <coproscefalo@gmail.com> Description: This file controls the USB Sleep Functions under battery, and set the level at which point they will be disabled, accepted values can be: + * 0 -> Disabled * 1-100 -> Battery level to disable sleep functions + Currently it prints two values, the first one indicates if the feature is enabled or disabled, while the second one shows the current battery level set. @@ -107,8 +118,10 @@ Date: January 23, 2015 KernelVersion: 4.0 Contact: Azael Avalos <coproscefalo@gmail.com> Description: This file controls the USB Rapid Charge state, which can be: + * 0 -> Disabled * 1 -> Enabled + Note that toggling this value requires a reboot for changes to take effect. Users: KToshiba @@ -118,8 +131,10 @@ Date: January 23, 2015 KernelVersion: 4.0 Contact: Azael Avalos <coproscefalo@gmail.com> Description: This file controls the Sleep & Music state, which values can be: + * 0 -> Disabled * 1 -> Enabled + Note that this feature only works when connected to power, if you want to use it under battery, see the entry named "sleep_functions_on_battery" @@ -138,6 +153,7 @@ KernelVersion: 4.0 Contact: Azael Avalos <coproscefalo@gmail.com> Description: This file controls the state of the internal fan, valid values are: + * 0 -> OFF * 1 -> ON @@ -147,8 +163,10 @@ KernelVersion: 4.0 Contact: Azael Avalos <coproscefalo@gmail.com> Description: This file controls the Special Functions (hotkeys) operation mode, valid values are: + * 0 -> Normal Operation * 1 -> Special Functions + In the "Normal Operation" mode, the F{1-12} keys are as usual and the hotkeys are accessed via FN-F{1-12}. In the "Special Functions" mode, the F{1-12} keys trigger the @@ -163,8 +181,10 @@ KernelVersion: 4.0 Contact: Azael Avalos <coproscefalo@gmail.com> Description: This file controls whether the laptop should turn ON whenever the LID is opened, valid values are: + * 0 -> Disabled * 1 -> Enabled + Note that toggling this value requires a reboot for changes to take effect. Users: KToshiba @@ -174,8 +194,10 @@ Date: February 12, 2015 KernelVersion: 4.0 Contact: Azael Avalos <coproscefalo@gmail.com> Description: This file controls the USB 3 functionality, valid values are: + * 0 -> Disabled (Acts as a regular USB 2) * 1 -> Enabled (Full USB 3 functionality) + Note that toggling this value requires a reboot for changes to take effect. Users: KToshiba @@ -188,10 +210,14 @@ Description: This file controls the Cooling Method feature. Reading this file prints two values, the first is the actual cooling method and the second is the maximum cooling method supported. When the maximum cooling method is ONE, valid values are: + * 0 -> Maximum Performance * 1 -> Battery Optimized + When the maximum cooling method is TWO, valid values are: + * 0 -> Maximum Performance * 1 -> Performance * 2 -> Battery Optimized + Users: KToshiba diff --git a/Documentation/ABI/testing/sysfs-driver-toshiba_haps b/Documentation/ABI/testing/sysfs-driver-toshiba_haps index a662370b4dbf..c938690ce10d 100644 --- a/Documentation/ABI/testing/sysfs-driver-toshiba_haps +++ b/Documentation/ABI/testing/sysfs-driver-toshiba_haps @@ -4,10 +4,12 @@ KernelVersion: 3.17 Contact: Azael Avalos <coproscefalo@gmail.com> Description: This file controls the built-in accelerometer protection level, valid values are: + * 0 -> Disabled * 1 -> Low * 2 -> Medium * 3 -> High + The default potection value is set to 2 (Medium). Users: KToshiba diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index d1a352194d2e..adc0d0e91607 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -18,6 +18,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the device type. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_class @@ -26,6 +27,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the device class. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_sub_class @@ -34,6 +36,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the UFS storage subclass. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/protocol @@ -43,6 +46,7 @@ Description: This file shows the protocol supported by an UFS device. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_luns @@ -51,6 +55,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows number of logical units. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_wluns @@ -60,6 +65,7 @@ Description: This file shows number of well known logical units. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/boot_enable @@ -69,6 +75,7 @@ Description: This file shows value that indicates whether the device is enabled for boot. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/descriptor_access_enable @@ -79,6 +86,7 @@ Description: This file shows value that indicates whether the device of the boot sequence. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_power_mode @@ -88,6 +96,7 @@ Description: This file shows value that defines the power mode after device initialization or hardware reset. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/high_priority_lun @@ -96,6 +105,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the high priority lun. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/secure_removal_type @@ -104,6 +114,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the secure removal type. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/support_security_lun @@ -113,6 +124,7 @@ Description: This file shows whether the security lun is supported. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/bkops_termination_latency @@ -122,6 +134,7 @@ Description: This file shows the background operations termination latency. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_active_icc_level @@ -130,6 +143,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the initial active ICC level. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/specification_version @@ -138,6 +152,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the specification version. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturing_date @@ -147,6 +162,7 @@ Description: This file shows the manufacturing date in BCD format. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturer_id @@ -155,6 +171,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the manufacturee ID. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtt_capability @@ -164,6 +181,7 @@ Description: This file shows the maximum number of outstanding RTTs supported by the device. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtc_update @@ -173,6 +191,7 @@ Description: This file shows the frequency and method of the realtime clock update. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ufs_features @@ -182,6 +201,7 @@ Description: This file shows which features are supported by the device. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ffu_timeout @@ -190,6 +210,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the FFU timeout. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/queue_depth @@ -198,6 +219,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the device queue depth. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_version @@ -206,6 +228,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the device version. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_secure_wpa @@ -215,6 +238,7 @@ Description: This file shows number of secure write protect areas supported by the device. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_max_data_size @@ -225,6 +249,7 @@ Description: This file shows the maximum amount of data that may be This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_state_timeout @@ -234,6 +259,7 @@ Description: This file shows the command maximum timeout for a change in PSA state. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. @@ -244,6 +270,7 @@ Description: This file shows the MIPI UniPro version number in BCD format. This is one of the UFS interconnect descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/mphy_version @@ -253,6 +280,7 @@ Description: This file shows the MIPI M-PHY version number in BCD format. This is one of the UFS interconnect descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. @@ -264,6 +292,7 @@ Description: This file shows the total memory quantity available to of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_luns @@ -273,6 +302,7 @@ Description: This file shows the maximum number of logical units supported by the UFS device. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/segment_size @@ -281,6 +311,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the segment size. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/allocation_unit_size @@ -289,6 +320,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the allocation unit size. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/min_addressable_block_size @@ -298,6 +330,7 @@ Description: This file shows the minimum addressable block size. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_read_block_size @@ -307,6 +340,7 @@ Description: This file shows the optimal read block size. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_write_block_size @@ -316,6 +350,7 @@ Description: This file shows the optimal write block size. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_in_buffer_size @@ -325,6 +360,7 @@ Description: This file shows the maximum data-in buffer size. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_out_buffer_size @@ -334,6 +370,7 @@ Description: This file shows the maximum data-out buffer size. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/rpmb_rw_size @@ -343,6 +380,7 @@ Description: This file shows the maximum number of RPMB frames allowed in Security Protocol In/Out. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/dyn_capacity_resource_policy @@ -352,6 +390,7 @@ Description: This file shows the dynamic capacity resource policy. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/data_ordering @@ -361,6 +400,7 @@ Description: This file shows support for out-of-order data transfer. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_contexts @@ -370,6 +410,7 @@ Description: This file shows maximum available number of contexts which are supported by the device. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_unit_size @@ -378,6 +419,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows system data tag unit size. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_resource_size @@ -388,6 +430,7 @@ Description: This file shows maximum storage area size allocated by This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/secure_removal_types @@ -397,6 +440,7 @@ Description: This file shows supported secure removal types. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/memory_types @@ -406,6 +450,7 @@ Description: This file shows supported memory types. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_max_alloc_units @@ -416,6 +461,7 @@ Description: This file shows the maximum number of allocation units for enhanced type 1-4). This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_capacity_adjustment_factor @@ -426,6 +472,7 @@ Description: This file shows the memory capacity adjustment factor for enhanced type 1-4). This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. @@ -436,6 +483,7 @@ Description: This file shows preend of life information. This is one of the UFS health descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_a @@ -445,6 +493,7 @@ Description: This file shows indication of the device life time (method a). This is one of the UFS health descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_b @@ -454,6 +503,7 @@ Description: This file shows indication of the device life time (method b). This is one of the UFS health descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. @@ -464,6 +514,7 @@ Description: This file shows maximum VCC, VCCQ and VCCQ2 value for active ICC levels from 0 to 15. This is one of the UFS power descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. @@ -473,6 +524,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file contains a device manufactureer name string. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_name @@ -480,6 +532,7 @@ Date: February 2018 Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file contains a product name string. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/oem_id @@ -487,6 +540,7 @@ Date: February 2018 Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file contains a OEM ID string. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/serial_number @@ -495,6 +549,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file contains a device serial number string. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_revision @@ -503,6 +558,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file contains a product revision string. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. @@ -512,6 +568,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows boot LUN information. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/lun_write_protect @@ -520,6 +577,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows LUN write protection status. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/lun_queue_depth @@ -528,6 +586,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows LUN queue depth. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/psa_sensitive @@ -536,6 +595,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows PSA sensitivity. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/lun_memory_type @@ -544,6 +604,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows LUN memory type. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/data_reliability @@ -553,6 +614,7 @@ Description: This file defines the device behavior when a power failure occurs during a write operation. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_size @@ -562,6 +624,7 @@ Description: This file shows the size of addressable logical blocks (calculated as an exponent with base 2). This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_count @@ -571,6 +634,7 @@ Description: This file shows total number of addressable logical blocks. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/erase_block_size @@ -579,6 +643,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the erase block size. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/provisioning_type @@ -587,6 +652,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the thin provisioning type. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count @@ -595,6 +661,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the total physical memory resources. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/context_capabilities @@ -603,6 +670,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the context capabilities. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/large_unit_granularity @@ -611,6 +679,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the granularity of the LUN. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. @@ -619,6 +688,7 @@ Date: February 2018 Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the device init status. The full information about the flag could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/permanent_wpe @@ -627,6 +697,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows whether permanent write protection is enabled. The full information about the flag could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/power_on_wpe @@ -636,6 +707,7 @@ Description: This file shows whether write protection is enabled on all logical units configured as power on write protected. The full information about the flag could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/bkops_enable @@ -644,6 +716,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows whether the device background operations are enabled. The full information about the flag could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/life_span_mode_enable @@ -652,6 +725,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows whether the device life span mode is enabled. The full information about the flag could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/phy_resource_removal @@ -660,6 +734,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows whether physical resource removal is enable. The full information about the flag could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/busy_rtc @@ -668,6 +743,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows whether the device is executing internal operation related to real time clock. The full information about the flag could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/disable_fw_update @@ -676,6 +752,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows whether the device FW update is permanently disabled. The full information about the flag could be found at UFS specifications 2.1. + The file is read only. @@ -685,6 +762,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file provides the boot lun enabled UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/current_power_mode @@ -693,6 +771,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file provides the current power mode UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/active_icc_level @@ -701,6 +780,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file provides the active icc level UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/ooo_data_enabled @@ -709,6 +789,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file provides the out of order data transfer enabled UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/bkops_status @@ -717,6 +798,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file provides the background operations status UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/purge_status @@ -725,6 +807,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file provides the purge operation status UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_in_size @@ -733,6 +816,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the maximum data size in a DATA IN UPIU. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_out_size @@ -741,6 +825,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the maximum number of bytes that can be requested with a READY TO TRANSFER UPIU. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/reference_clock_frequency @@ -749,6 +834,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file provides the reference clock frequency UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/configuration_descriptor_lock @@ -765,6 +851,7 @@ Description: This file provides the maximum current number of outstanding RTTs in device that is allowed. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_control @@ -773,6 +860,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file provides the exception event control UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_status @@ -781,6 +869,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file provides the exception event status UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/ffu_status @@ -789,6 +878,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file provides the ffu status UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_state @@ -796,6 +886,7 @@ Date: February 2018 Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file show the PSA feature status. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_data_size @@ -805,6 +896,7 @@ Description: This file shows the amount of data that the host plans to load to all logical units in pre-soldering state. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. @@ -815,6 +907,7 @@ Description: This file shows the The amount of physical memory needed to be removed from the physical memory resources pool of the particular logical unit. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. @@ -824,24 +917,28 @@ Contact: Subhash Jadavani <subhashj@codeaurora.org> Description: This entry could be used to set or show the UFS device runtime power management level. The current driver implementation supports 6 levels with next target states: - 0 - an UFS device will stay active, an UIC link will - stay active - 1 - an UFS device will stay active, an UIC link will - hibernate - 2 - an UFS device will moved to sleep, an UIC link will - stay active - 3 - an UFS device will moved to sleep, an UIC link will - hibernate - 4 - an UFS device will be powered off, an UIC link will - hibernate - 5 - an UFS device will be powered off, an UIC link will - be powered off + + == ==================================================== + 0 an UFS device will stay active, an UIC link will + stay active + 1 an UFS device will stay active, an UIC link will + hibernate + 2 an UFS device will moved to sleep, an UIC link will + stay active + 3 an UFS device will moved to sleep, an UIC link will + hibernate + 4 an UFS device will be powered off, an UIC link will + hibernate + 5 an UFS device will be powered off, an UIC link will + be powered off + == ==================================================== What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state Date: February 2018 Contact: Subhash Jadavani <subhashj@codeaurora.org> Description: This entry shows the target power mode of an UFS device for the chosen runtime power management level. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state @@ -849,6 +946,7 @@ Date: February 2018 Contact: Subhash Jadavani <subhashj@codeaurora.org> Description: This entry shows the target state of an UFS UIC link for the chosen runtime power management level. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/spm_lvl @@ -857,24 +955,28 @@ Contact: Subhash Jadavani <subhashj@codeaurora.org> Description: This entry could be used to set or show the UFS device system power management level. The current driver implementation supports 6 levels with next target states: - 0 - an UFS device will stay active, an UIC link will - stay active - 1 - an UFS device will stay active, an UIC link will - hibernate - 2 - an UFS device will moved to sleep, an UIC link will - stay active - 3 - an UFS device will moved to sleep, an UIC link will - hibernate - 4 - an UFS device will be powered off, an UIC link will - hibernate - 5 - an UFS device will be powered off, an UIC link will - be powered off + + == ==================================================== + 0 an UFS device will stay active, an UIC link will + stay active + 1 an UFS device will stay active, an UIC link will + hibernate + 2 an UFS device will moved to sleep, an UIC link will + stay active + 3 an UFS device will moved to sleep, an UIC link will + hibernate + 4 an UFS device will be powered off, an UIC link will + hibernate + 5 an UFS device will be powered off, an UIC link will + be powered off + == ==================================================== What: /sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state Date: February 2018 Contact: Subhash Jadavani <subhashj@codeaurora.org> Description: This entry shows the target power mode of an UFS device for the chosen system power management level. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/spm_target_link_state @@ -882,18 +984,21 @@ Date: February 2018 Contact: Subhash Jadavani <subhashj@codeaurora.org> Description: This entry shows the target state of an UFS UIC link for the chosen system power management level. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en Date: June 2020 Contact: Asutosh Das <asutoshd@codeaurora.org> Description: This entry shows if preserve user-space was configured + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_shared_alloc_units Date: June 2020 Contact: Asutosh Das <asutoshd@codeaurora.org> Description: This entry shows the shared allocated units of WB buffer + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_type @@ -901,6 +1006,7 @@ Date: June 2020 Contact: Asutosh Das <asutoshd@codeaurora.org> Description: This entry shows the configured WB type. 0x1 for shared buffer mode. 0x0 for dedicated buffer mode. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_buff_cap_adj @@ -910,6 +1016,7 @@ Description: This entry shows the total user-space decrease in shared buffer mode. The value of this parameter is 3 for TLC NAND when SLC mode is used as WriteBooster Buffer. 2 for MLC NAND. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_alloc_units @@ -917,6 +1024,7 @@ Date: June 2020 Contact: Asutosh Das <asutoshd@codeaurora.org> Description: This entry shows the Maximum total WriteBooster Buffer size which is supported by the entire device. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_wb_luns @@ -924,6 +1032,7 @@ Date: June 2020 Contact: Asutosh Das <asutoshd@codeaurora.org> Description: This entry shows the maximum number of luns that can support WriteBooster. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_red_type @@ -937,46 +1046,59 @@ Description: The supportability of user space reduction mode preserve user space type. 02h: Device can be configured in either user space reduction type or preserve user space type. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_wb_type Date: June 2020 Contact: Asutosh Das <asutoshd@codeaurora.org> Description: The supportability of WriteBooster Buffer type. - 00h: LU based WriteBooster Buffer configuration - 01h: Single shared WriteBooster Buffer - configuration - 02h: Supporting both LU based WriteBooster - Buffer and Single shared WriteBooster Buffer - configuration + + === ========================================================== + 00h LU based WriteBooster Buffer configuration + 01h Single shared WriteBooster Buffer configuration + 02h Supporting both LU based WriteBooster. + Buffer and Single shared WriteBooster Buffer configuration + === ========================================================== + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_enable Date: June 2020 Contact: Asutosh Das <asutoshd@codeaurora.org> Description: This entry shows the status of WriteBooster. - 0: WriteBooster is not enabled. - 1: WriteBooster is enabled + + == ============================ + 0 WriteBooster is not enabled. + 1 WriteBooster is enabled + == ============================ + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_en Date: June 2020 Contact: Asutosh Das <asutoshd@codeaurora.org> Description: This entry shows if flush is enabled. - 0: Flush operation is not performed. - 1: Flush operation is performed. + + == ================================= + 0 Flush operation is not performed. + 1 Flush operation is performed. + == ================================= + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_during_h8 Date: June 2020 Contact: Asutosh Das <asutoshd@codeaurora.org> Description: Flush WriteBooster Buffer during hibernate state. - 0: Device is not allowed to flush the - WriteBooster Buffer during link hibernate - state. - 1: Device is allowed to flush the - WriteBooster Buffer during link hibernate - state + + == ================================================= + 0 Device is not allowed to flush the + WriteBooster Buffer during link hibernate state. + 1 Device is allowed to flush the + WriteBooster Buffer during link hibernate state. + == ================================================= + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_avail_buf @@ -984,23 +1106,30 @@ Date: June 2020 Contact: Asutosh Das <asutoshd@codeaurora.org> Description: This entry shows the amount of unused WriteBooster buffer available. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_cur_buf Date: June 2020 Contact: Asutosh Das <asutoshd@codeaurora.org> Description: This entry shows the amount of unused current buffer. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_flush_status Date: June 2020 Contact: Asutosh Das <asutoshd@codeaurora.org> Description: This entry shows the flush operation status. - 00h: idle - 01h: Flush operation in progress - 02h: Flush operation stopped prematurely. - 03h: Flush operation completed successfully - 04h: Flush operation general failure + + + === ====================================== + 00h idle + 01h Flush operation in progress + 02h Flush operation stopped prematurely. + 03h Flush operation completed successfully + 04h Flush operation general failure + === ====================================== + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_life_time_est @@ -1008,9 +1137,13 @@ Date: June 2020 Contact: Asutosh Das <asutoshd@codeaurora.org> Description: This entry shows an indication of the WriteBooster Buffer lifetime based on the amount of performed program/erase cycles - 01h: 0% - 10% WriteBooster Buffer life time used + + === ============================================= + 01h 0% - 10% WriteBooster Buffer life time used ... - 0Ah: 90% - 100% WriteBooster Buffer life time used + 0Ah 90% - 100% WriteBooster Buffer life time used + === ============================================= + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/wb_buf_alloc_units @@ -1018,4 +1151,5 @@ Date: June 2020 Contact: Asutosh Das <asutoshd@codeaurora.org> Description: This entry shows the configured size of WriteBooster buffer. 0400h corresponds to 4GB. + The file is read only. diff --git a/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 b/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 index d301e7017afe..e92aba4eb594 100644 --- a/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 +++ b/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 @@ -5,7 +5,9 @@ Contact: Jan Kandziora <jjj@gmx.de> Description: When written, this file sets the I2C speed on the connected DS28E17 chip. When read, it reads the current setting from the DS28E17 chip. + Valid values: 100, 400, 900 [kBaud]. + Default 100, can be set by w1_ds28e17.speed= module parameter. Users: w1_ds28e17 driver @@ -17,5 +19,6 @@ Description: When written, this file sets the multiplier used to calculate the busy timeout for I2C operations on the connected DS28E17 chip. When read, returns the current setting. Valid values: 1 to 9. + Default 1, can be set by w1_ds28e17.stretch= module parameter. Users: w1_ds28e17 driver diff --git a/Documentation/ABI/testing/sysfs-driver-w1_therm b/Documentation/ABI/testing/sysfs-driver-w1_therm index 8873bbb075cb..6a37dc33ffdb 100644 --- a/Documentation/ABI/testing/sysfs-driver-w1_therm +++ b/Documentation/ABI/testing/sysfs-driver-w1_therm @@ -22,8 +22,10 @@ Description: device data to its embedded EEPROM, either restore data embedded in device EEPROM. Be aware that devices support limited EEPROM writing cycles (typical 50k) + * 'save': save device RAM to EEPROM * 'restore': restore EEPROM data in device RAM + Users: any user space application which wants to communicate with w1_term device @@ -33,9 +35,11 @@ Date: May 2020 Contact: Akira Shimahara <akira215corp@gmail.com> Description: (RO) return the power status by asking the device + * '0': device parasite powered * '1': device externally powered * '-xx': xx is kernel error when reading power status + Users: any user space application which wants to communicate with w1_term device @@ -49,10 +53,12 @@ Description: will be changed only in device RAM, so it will be cleared when power is lost. Trigger a 'save' to EEPROM command to keep values after power-on. Read or write are : + * '9..14': device resolution in bit - or resolution to set in bit + or resolution to set in bit * '-xx': xx is kernel error when reading the resolution * Anything else: do nothing + Some DS18B20 clones are fixed in 12-bit resolution, so the actual resolution is read back from the chip and verified. Error is reported if the results differ. @@ -65,16 +71,18 @@ Date: May 2020 Contact: Akira Shimahara <akira215corp@gmail.com> Description: (RO) return the temperature in 1/1000 degC. + * If a bulk read has been triggered, it will directly - return the temperature computed when the bulk read - occurred, if available. If not yet available, nothing - is returned (a debug kernel message is sent), you - should retry later on. + return the temperature computed when the bulk read + occurred, if available. If not yet available, nothing + is returned (a debug kernel message is sent), you + should retry later on. * If no bulk read has been triggered, it will trigger - a conversion and send the result. Note that the - conversion duration depend on the resolution (if - device support this feature). It takes 94ms in 9bits - resolution, 750ms for 12bits. + a conversion and send the result. Note that the + conversion duration depend on the resolution (if + device support this feature). It takes 94ms in 9bits + resolution, 750ms for 12bits. + Users: any user space application which wants to communicate with w1_term device @@ -86,12 +94,14 @@ Description: (RW) return the temperature in 1/1000 degC. *read*: return 2 lines with the hexa output data sent on the bus, return the CRC check and temperature in 1/1000 degC - *write* : + *write*: + * '0' : save the 2 or 3 bytes to the device EEPROM - (i.e. TH, TL and config register) + (i.e. TH, TL and config register) * '9..14' : set the device resolution in RAM - (if supported) + (if supported) * Anything else: do nothing + refer to Documentation/w1/slaves/w1_therm.rst for detailed information. Users: any user space application which wants to communicate with @@ -103,14 +113,21 @@ Date: May 2020 Contact: Akira Shimahara <akira215corp@gmail.com> Description: (RW) trigger a bulk read conversion. read the status + *read*: - * '-1': conversion in progress on at least 1 sensor - * '1' : conversion complete but at least one sensor + * '-1': + conversion in progress on at least 1 sensor + * '1' : + conversion complete but at least one sensor value has not been read yet - * '0' : no bulk operation. Reading temperature will + * '0' : + no bulk operation. Reading temperature will trigger a conversion on each device - *write*: 'trigger': trigger a bulk read on all supporting + + *write*: + 'trigger': trigger a bulk read on all supporting devices on the bus + Note that if a bulk read is sent but one sensor is not read immediately, the next access to temperature on this device will return the temperature measured at the time of issue @@ -128,14 +145,19 @@ Description: reset to default (datasheet) conversion time for a new resolution. - *read*: Actual conversion time in milliseconds. *write*: - '0': Set the default conversion time from the datasheet. - '1': Measure and set the conversion time. Make a single + *read*: + Actual conversion time in milliseconds. + + *write*: + * '0': + Set the default conversion time from the datasheet. + * '1': + Measure and set the conversion time. Make a single temperature conversion, measure an actual value. Increase it by 20% for temperature range. A new conversion time can be obtained by reading this same attribute. - other positive value: + * other positive value: Set the conversion time in milliseconds. Users: An application using the w1_term device @@ -148,16 +170,21 @@ Description: (RW) Control optional driver settings. Bit masks to read/write (bitwise OR): - 1: Enable check for conversion success. If byte 6 of + == ============================================================ + 1 Enable check for conversion success. If byte 6 of scratchpad memory is 0xC after conversion, and temperature reads 85.00 (powerup value) or 127.94 (insufficient power) - return a conversion error. - 2: Enable poll for conversion completion. Generate read cycles + 2 Enable poll for conversion completion. Generate read cycles after the conversion start and wait for 1's. In parasite power mode this feature is not available. + == ============================================================ + + *read*: + Currently selected features. - *read*: Currently selected features. - *write*: Select features. + *write*: + Select features. Users: An application using the w1_term device diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom index afc48fc163b5..16acaa5712ec 100644 --- a/Documentation/ABI/testing/sysfs-driver-wacom +++ b/Documentation/ABI/testing/sysfs-driver-wacom @@ -79,7 +79,9 @@ Description: When the Wacom Intuos 4 is connected over Bluetooth, the image has to contain 256 bytes (64x32 px 1 bit colour). The format is also scrambled, like in the USB mode, and it can - be summarized by converting 76543210 into GECA6420. + be summarized by converting:: + + 76543210 into GECA6420. HGFEDCBA HFDB7531 What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/unpair_remote diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi index 613f42a9d5cd..b16d30a71709 100644 --- a/Documentation/ABI/testing/sysfs-firmware-acpi +++ b/Documentation/ABI/testing/sysfs-firmware-acpi @@ -12,11 +12,14 @@ Description: image: The image bitmap. Currently a 32-bit BMP. status: 1 if the image is valid, 0 if firmware invalidated it. type: 0 indicates image is in BMP format. + + ======== =================================================== version: The version of the BGRT. Currently 1. xoffset: The number of pixels between the left of the screen and the left edge of the image. yoffset: The number of pixels between the top of the screen and the top edge of the image. + ======== =================================================== What: /sys/firmware/acpi/hotplug/ Date: February 2013 @@ -33,12 +36,14 @@ Description: The following setting is available to user space for each hotplug profile: + ======== ======================================================= enabled: If set, the ACPI core will handle notifications of - hotplug events associated with the given class of - devices and will allow those devices to be ejected with - the help of the _EJ0 control method. Unsetting it - effectively disables hotplug for the correspoinding - class of devices. + hotplug events associated with the given class of + devices and will allow those devices to be ejected with + the help of the _EJ0 control method. Unsetting it + effectively disables hotplug for the correspoinding + class of devices. + ======== ======================================================= The value of the above attribute is an integer number: 1 (set) or 0 (unset). Attempts to write any other values to it will @@ -71,86 +76,90 @@ Description: To figure out where all the SCI's are coming from, /sys/firmware/acpi/interrupts contains a file listing every possible source, and the count of how many - times it has triggered. - - $ cd /sys/firmware/acpi/interrupts - $ grep . * - error: 0 - ff_gbl_lock: 0 enable - ff_pmtimer: 0 invalid - ff_pwr_btn: 0 enable - ff_rt_clk: 2 disable - ff_slp_btn: 0 invalid - gpe00: 0 invalid - gpe01: 0 enable - gpe02: 108 enable - gpe03: 0 invalid - gpe04: 0 invalid - gpe05: 0 invalid - gpe06: 0 enable - gpe07: 0 enable - gpe08: 0 invalid - gpe09: 0 invalid - gpe0A: 0 invalid - gpe0B: 0 invalid - gpe0C: 0 invalid - gpe0D: 0 invalid - gpe0E: 0 invalid - gpe0F: 0 invalid - gpe10: 0 invalid - gpe11: 0 invalid - gpe12: 0 invalid - gpe13: 0 invalid - gpe14: 0 invalid - gpe15: 0 invalid - gpe16: 0 invalid - gpe17: 1084 enable - gpe18: 0 enable - gpe19: 0 invalid - gpe1A: 0 invalid - gpe1B: 0 invalid - gpe1C: 0 invalid - gpe1D: 0 invalid - gpe1E: 0 invalid - gpe1F: 0 invalid - gpe_all: 1192 - sci: 1194 - sci_not: 0 - - sci - The number of times the ACPI SCI - has been called and claimed an interrupt. - - sci_not - The number of times the ACPI SCI - has been called and NOT claimed an interrupt. - - gpe_all - count of SCI caused by GPEs. - - gpeXX - count for individual GPE source - - ff_gbl_lock - Global Lock - - ff_pmtimer - PM Timer - - ff_pwr_btn - Power Button - - ff_rt_clk - Real Time Clock - - ff_slp_btn - Sleep Button - - error - an interrupt that can't be accounted for above. - - invalid: it's either a GPE or a Fixed Event that - doesn't have an event handler. - - disable: the GPE/Fixed Event is valid but disabled. - - enable: the GPE/Fixed Event is valid and enabled. - - Root has permission to clear any of these counters. Eg. - # echo 0 > gpe11 - - All counters can be cleared by clearing the total "sci": - # echo 0 > sci + times it has triggered:: + + $ cd /sys/firmware/acpi/interrupts + $ grep . * + error: 0 + ff_gbl_lock: 0 enable + ff_pmtimer: 0 invalid + ff_pwr_btn: 0 enable + ff_rt_clk: 2 disable + ff_slp_btn: 0 invalid + gpe00: 0 invalid + gpe01: 0 enable + gpe02: 108 enable + gpe03: 0 invalid + gpe04: 0 invalid + gpe05: 0 invalid + gpe06: 0 enable + gpe07: 0 enable + gpe08: 0 invalid + gpe09: 0 invalid + gpe0A: 0 invalid + gpe0B: 0 invalid + gpe0C: 0 invalid + gpe0D: 0 invalid + gpe0E: 0 invalid + gpe0F: 0 invalid + gpe10: 0 invalid + gpe11: 0 invalid + gpe12: 0 invalid + gpe13: 0 invalid + gpe14: 0 invalid + gpe15: 0 invalid + gpe16: 0 invalid + gpe17: 1084 enable + gpe18: 0 enable + gpe19: 0 invalid + gpe1A: 0 invalid + gpe1B: 0 invalid + gpe1C: 0 invalid + gpe1D: 0 invalid + gpe1E: 0 invalid + gpe1F: 0 invalid + gpe_all: 1192 + sci: 1194 + sci_not: 0 + + =========== ================================================== + sci The number of times the ACPI SCI + has been called and claimed an interrupt. + + sci_not The number of times the ACPI SCI + has been called and NOT claimed an interrupt. + + gpe_all count of SCI caused by GPEs. + + gpeXX count for individual GPE source + + ff_gbl_lock Global Lock + + ff_pmtimer PM Timer + + ff_pwr_btn Power Button + + ff_rt_clk Real Time Clock + + ff_slp_btn Sleep Button + + error an interrupt that can't be accounted for above. + + invalid it's either a GPE or a Fixed Event that + doesn't have an event handler. + + disable the GPE/Fixed Event is valid but disabled. + + enable the GPE/Fixed Event is valid and enabled. + =========== ================================================== + + Root has permission to clear any of these counters. Eg.:: + + # echo 0 > gpe11 + + All counters can be cleared by clearing the total "sci":: + + # echo 0 > sci None of these counters has an effect on the function of the system, they are simply statistics. @@ -165,32 +174,34 @@ Description: Let's take power button fixed event for example, please kill acpid and other user space applications so that the machine won't shutdown - when pressing the power button. - # cat ff_pwr_btn - 0 enabled - # press the power button for 3 times; - # cat ff_pwr_btn - 3 enabled - # echo disable > ff_pwr_btn - # cat ff_pwr_btn - 3 disabled - # press the power button for 3 times; - # cat ff_pwr_btn - 3 disabled - # echo enable > ff_pwr_btn - # cat ff_pwr_btn - 4 enabled - /* - * this is because the status bit is set even if the enable bit is cleared, - * and it triggers an ACPI fixed event when the enable bit is set again - */ - # press the power button for 3 times; - # cat ff_pwr_btn - 7 enabled - # echo disable > ff_pwr_btn - # press the power button for 3 times; - # echo clear > ff_pwr_btn /* clear the status bit */ - # echo disable > ff_pwr_btn - # cat ff_pwr_btn - 7 enabled + when pressing the power button:: + + # cat ff_pwr_btn + 0 enabled + # press the power button for 3 times; + # cat ff_pwr_btn + 3 enabled + # echo disable > ff_pwr_btn + # cat ff_pwr_btn + 3 disabled + # press the power button for 3 times; + # cat ff_pwr_btn + 3 disabled + # echo enable > ff_pwr_btn + # cat ff_pwr_btn + 4 enabled + /* + * this is because the status bit is set even if the enable + * bit is cleared, and it triggers an ACPI fixed event when + * the enable bit is set again + */ + # press the power button for 3 times; + # cat ff_pwr_btn + 7 enabled + # echo disable > ff_pwr_btn + # press the power button for 3 times; + # echo clear > ff_pwr_btn /* clear the status bit */ + # echo disable > ff_pwr_btn + # cat ff_pwr_btn + 7 enabled diff --git a/Documentation/ABI/testing/sysfs-firmware-dmi-entries b/Documentation/ABI/testing/sysfs-firmware-dmi-entries index 210ad44b95a5..fe0289c87768 100644 --- a/Documentation/ABI/testing/sysfs-firmware-dmi-entries +++ b/Documentation/ABI/testing/sysfs-firmware-dmi-entries @@ -33,7 +33,7 @@ Description: doesn't matter), they will be represented in sysfs as entries "T-0" through "T-(N-1)": - Example entry directories: + Example entry directories:: /sys/firmware/dmi/entries/17-0 /sys/firmware/dmi/entries/17-1 @@ -50,61 +50,65 @@ Description: Each DMI entry in sysfs has the common header values exported as attributes: - handle : The 16bit 'handle' that is assigned to this + ======== ================================================= + handle The 16bit 'handle' that is assigned to this entry by the firmware. This handle may be referred to by other entries. - length : The length of the entry, as presented in the + length The length of the entry, as presented in the entry itself. Note that this is _not the total count of bytes associated with the - entry_. This value represents the length of + entry. This value represents the length of the "formatted" portion of the entry. This "formatted" region is sometimes followed by the "unformatted" region composed of nul terminated strings, with termination signalled by a two nul characters in series. - raw : The raw bytes of the entry. This includes the + raw The raw bytes of the entry. This includes the "formatted" portion of the entry, the "unformatted" strings portion of the entry, and the two terminating nul characters. - type : The type of the entry. This value is the same + type The type of the entry. This value is the same as found in the directory name. It indicates how the rest of the entry should be interpreted. - instance: The instance ordinal of the entry for the + instance The instance ordinal of the entry for the given type. This value is the same as found in the parent directory name. - position: The ordinal position (zero-based) of the entry + position The ordinal position (zero-based) of the entry within the entirety of the DMI entry table. + ======== ================================================= - === Entry Specialization === + **Entry Specialization** Some entry types may have other information available in sysfs. Not all types are specialized. - --- Type 15 - System Event Log --- + **Type 15 - System Event Log** This entry allows the firmware to export a log of events the system has taken. This information is typically backed by nvram, but the implementation details are abstracted by this table. This entry's data - is exported in the directory: + is exported in the directory:: - /sys/firmware/dmi/entries/15-0/system_event_log + /sys/firmware/dmi/entries/15-0/system_event_log and has the following attributes (documented in the SMBIOS / DMI specification under "System Event Log (Type 15)": - area_length - header_start_offset - data_start_offset - access_method - status - change_token - access_method_address - header_format - per_log_type_descriptor_length - type_descriptors_supported_count + - area_length + - header_start_offset + - data_start_offset + - access_method + - status + - change_token + - access_method_address + - header_format + - per_log_type_descriptor_length + - type_descriptors_supported_count As well, the kernel exports the binary attribute: - raw_event_log : The raw binary bits of the event log + ============= ==================================== + raw_event_log The raw binary bits of the event log as described by the DMI entry. + ============= ==================================== diff --git a/Documentation/ABI/testing/sysfs-firmware-efi-esrt b/Documentation/ABI/testing/sysfs-firmware-efi-esrt index 6e431d1a4e79..31b57676d4ad 100644 --- a/Documentation/ABI/testing/sysfs-firmware-efi-esrt +++ b/Documentation/ABI/testing/sysfs-firmware-efi-esrt @@ -35,10 +35,13 @@ What: /sys/firmware/efi/esrt/entries/entry$N/fw_type Date: February 2015 Contact: Peter Jones <pjones@redhat.com> Description: What kind of firmware entry this is: - 0 - Unknown - 1 - System Firmware - 2 - Device Firmware - 3 - UEFI Driver + + == =============== + 0 Unknown + 1 System Firmware + 2 Device Firmware + 3 UEFI Driver + == =============== What: /sys/firmware/efi/esrt/entries/entry$N/fw_class Date: February 2015 @@ -71,11 +74,14 @@ Date: February 2015 Contact: Peter Jones <pjones@redhat.com> Description: The result of the last firmware update attempt for the firmware resource entry. - 0 - Success - 1 - Insufficient resources - 2 - Incorrect version - 3 - Invalid format - 4 - Authentication error - 5 - AC power event - 6 - Battery power event + + == ====================== + 0 Success + 1 Insufficient resources + 2 Incorrect version + 3 Invalid format + 4 Authentication error + 5 AC power event + 6 Battery power event + == ====================== diff --git a/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map b/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map index c61b9b348e99..9c4d581be396 100644 --- a/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map +++ b/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map @@ -14,7 +14,7 @@ Description: Switching efi runtime services to virtual mode requires /sys/firmware/efi/runtime-map/ is the directory the kernel exports that information in. - subdirectories are named with the number of the memory range: + subdirectories are named with the number of the memory range:: /sys/firmware/efi/runtime-map/0 /sys/firmware/efi/runtime-map/1 @@ -24,11 +24,13 @@ Description: Switching efi runtime services to virtual mode requires Each subdirectory contains five files: - attribute : The attributes of the memory range. - num_pages : The size of the memory range in pages. - phys_addr : The physical address of the memory range. - type : The type of the memory range. - virt_addr : The virtual address of the memory range. + ========= ========================================= + attribute The attributes of the memory range. + num_pages The size of the memory range in pages. + phys_addr The physical address of the memory range. + type The type of the memory range. + virt_addr The virtual address of the memory range. + ========= ========================================= Above values are all hexadecimal numbers with the '0x' prefix. Users: Kexec diff --git a/Documentation/ABI/testing/sysfs-firmware-gsmi b/Documentation/ABI/testing/sysfs-firmware-gsmi index 0faa0aaf4b6a..7a558354c1ee 100644 --- a/Documentation/ABI/testing/sysfs-firmware-gsmi +++ b/Documentation/ABI/testing/sysfs-firmware-gsmi @@ -20,7 +20,7 @@ Description: This directory has the same layout (and underlying implementation as /sys/firmware/efi/vars. - See Documentation/ABI/*/sysfs-firmware-efi-vars + See `Documentation/ABI/*/sysfs-firmware-efi-vars` for more information on how to interact with this structure. diff --git a/Documentation/ABI/testing/sysfs-firmware-memmap b/Documentation/ABI/testing/sysfs-firmware-memmap index eca0d65087dc..1f6f4d3a32c0 100644 --- a/Documentation/ABI/testing/sysfs-firmware-memmap +++ b/Documentation/ABI/testing/sysfs-firmware-memmap @@ -20,7 +20,7 @@ Description: the raw memory map to userspace. The structure is as follows: Under /sys/firmware/memmap there - are subdirectories with the number of the entry as their name: + are subdirectories with the number of the entry as their name:: /sys/firmware/memmap/0 /sys/firmware/memmap/1 @@ -34,14 +34,16 @@ Description: Each directory contains three files: - start : The start address (as hexadecimal number with the + ======== ===================================================== + start The start address (as hexadecimal number with the '0x' prefix). - end : The end address, inclusive (regardless whether the + end The end address, inclusive (regardless whether the firmware provides inclusive or exclusive ranges). - type : Type of the entry as string. See below for a list of + type Type of the entry as string. See below for a list of valid types. + ======== ===================================================== - So, for example: + So, for example:: /sys/firmware/memmap/0/start /sys/firmware/memmap/0/end @@ -57,9 +59,8 @@ Description: - reserved Following shell snippet can be used to display that memory - map in a human-readable format: + map in a human-readable format:: - -------------------- 8< ---------------------------------------- #!/bin/bash cd /sys/firmware/memmap for dir in * ; do @@ -68,4 +69,3 @@ Description: type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done - -------------------- >8 ---------------------------------------- diff --git a/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg b/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg index 011dda4f8e8a..ee0d6dbc810e 100644 --- a/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg +++ b/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg @@ -15,7 +15,7 @@ Description: to the fw_cfg device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree. - === SysFS fw_cfg Interface === + **SysFS fw_cfg Interface** The fw_cfg sysfs interface described in this document is only intended to display discoverable blobs (i.e., those registered @@ -31,7 +31,7 @@ Description: /sys/firmware/qemu_fw_cfg/rev - --- Discoverable fw_cfg blobs by selector key --- + **Discoverable fw_cfg blobs by selector key** All discoverable blobs listed in the fw_cfg file directory are displayed as entries named after their unique selector key @@ -45,24 +45,26 @@ Description: Each such fw_cfg sysfs entry has the following values exported as attributes: - name : The 56-byte nul-terminated ASCII string used as the + ==== ==================================================== + name The 56-byte nul-terminated ASCII string used as the blob's 'file name' in the fw_cfg directory. - size : The length of the blob, as given in the fw_cfg + size The length of the blob, as given in the fw_cfg directory. - key : The value of the blob's selector key as given in the + key The value of the blob's selector key as given in the fw_cfg directory. This value is the same as used in the parent directory name. - raw : The raw bytes of the blob, obtained by selecting the + raw The raw bytes of the blob, obtained by selecting the entry via the control register, and reading a number of bytes equal to the blob size from the data register. + ==== ==================================================== - --- Listing fw_cfg blobs by file name --- + **Listing fw_cfg blobs by file name** While the fw_cfg device does not impose any specific naming convention on the blobs registered in the file directory, QEMU developers have traditionally used path name semantics - to give each blob a descriptive name. For example: + to give each blob a descriptive name. For example:: "bootorder" "genroms/kvmvapic.bin" @@ -81,7 +83,7 @@ Description: of directories matching the path name components of fw_cfg blob names, ending in symlinks to the by_key entry for each "basename", as illustrated below (assume current directory is - /sys/firmware): + /sys/firmware):: qemu_fw_cfg/by_name/bootorder -> ../by_key/38 qemu_fw_cfg/by_name/etc/e820 -> ../../by_key/35 diff --git a/Documentation/ABI/testing/sysfs-firmware-sfi b/Documentation/ABI/testing/sysfs-firmware-sfi index 4be7d44aeacf..5210e0f06ddb 100644 --- a/Documentation/ABI/testing/sysfs-firmware-sfi +++ b/Documentation/ABI/testing/sysfs-firmware-sfi @@ -9,7 +9,7 @@ Description: http://simplefirmware.org/documentation While the tables are used by the kernel, user-space - can observe them this way: + can observe them this way:: - # cd /sys/firmware/sfi/tables - # cat $TABLENAME > $TABLENAME.bin + # cd /sys/firmware/sfi/tables + # cat $TABLENAME > $TABLENAME.bin diff --git a/Documentation/ABI/testing/sysfs-firmware-sgi_uv b/Documentation/ABI/testing/sysfs-firmware-sgi_uv index 4573fd4b7876..66800baab096 100644 --- a/Documentation/ABI/testing/sysfs-firmware-sgi_uv +++ b/Documentation/ABI/testing/sysfs-firmware-sgi_uv @@ -5,7 +5,7 @@ Description: The /sys/firmware/sgi_uv directory contains information about the SGI UV platform. - Under that directory are a number of files: + Under that directory are a number of files:: partition_id coherence_id @@ -14,7 +14,7 @@ Description: SGI UV systems can be partitioned into multiple physical machines, which each partition running a unique copy of the operating system. Each partition will have a unique - partition id. To display the partition id, use the command: + partition id. To display the partition id, use the command:: cat /sys/firmware/sgi_uv/partition_id @@ -22,6 +22,6 @@ Description: A partitioned SGI UV system can have one or more coherence domain. The coherence id indicates which coherence domain this partition is in. To display the coherence id, use the - command: + command:: cat /sys/firmware/sgi_uv/coherence_id diff --git a/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm b/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm index 15595fab88d1..b8631f5a29c4 100644 --- a/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm +++ b/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm @@ -2,21 +2,21 @@ What: /sys/firmware/turris-mox-rwtm/board_version Date: August 2019 KernelVersion: 5.4 Contact: Marek Behún <marek.behun@nic.cz> -Description: (R) Board version burned into eFuses of this Turris Mox board. +Description: (Read) Board version burned into eFuses of this Turris Mox board. Format: %i What: /sys/firmware/turris-mox-rwtm/mac_address* Date: August 2019 KernelVersion: 5.4 Contact: Marek Behún <marek.behun@nic.cz> -Description: (R) MAC addresses burned into eFuses of this Turris Mox board. +Description: (Read) MAC addresses burned into eFuses of this Turris Mox board. Format: %pM What: /sys/firmware/turris-mox-rwtm/pubkey Date: August 2019 KernelVersion: 5.4 Contact: Marek Behún <marek.behun@nic.cz> -Description: (R) ECDSA public key (in pubkey hex compressed form) computed +Description: (Read) ECDSA public key (in pubkey hex compressed form) computed as pair to the ECDSA private key burned into eFuses of this Turris Mox Board. Format: string @@ -25,7 +25,7 @@ What: /sys/firmware/turris-mox-rwtm/ram_size Date: August 2019 KernelVersion: 5.4 Contact: Marek Behún <marek.behun@nic.cz> -Description: (R) RAM size in MiB of this Turris Mox board as was detected +Description: (Read) RAM size in MiB of this Turris Mox board as was detected during manufacturing and burned into eFuses. Can be 512 or 1024. Format: %i @@ -33,5 +33,5 @@ What: /sys/firmware/turris-mox-rwtm/serial_number Date: August 2019 KernelVersion: 5.4 Contact: Marek Behún <marek.behun@nic.cz> -Description: (R) Serial number burned into eFuses of this Turris Mox device. +Description: (Read) Serial number burned into eFuses of this Turris Mox device. Format: %016X diff --git a/Documentation/ABI/testing/sysfs-fs-ext4 b/Documentation/ABI/testing/sysfs-fs-ext4 index 78604db56279..99e3d92f8299 100644 --- a/Documentation/ABI/testing/sysfs-fs-ext4 +++ b/Documentation/ABI/testing/sysfs-fs-ext4 @@ -45,8 +45,8 @@ Description: parameter will have their blocks allocated out of a block group specific preallocation pool, so that small files are packed closely together. Each large file - will have its blocks allocated out of its own unique - preallocation pool. + will have its blocks allocated out of its own unique + preallocation pool. What: /sys/fs/ext4/<disk>/inode_readahead_blks Date: March 2008 diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index 834d0becae6d..67b3ed8e8c2f 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -20,10 +20,13 @@ What: /sys/fs/f2fs/<disk>/gc_idle Date: July 2013 Contact: "Namjae Jeon" <namjae.jeon@samsung.com> Description: Controls the victim selection policy for garbage collection. - Setting gc_idle = 0(default) will disable this option. Setting - gc_idle = 1 will select the Cost Benefit approach & setting - gc_idle = 2 will select the greedy approach & setting - gc_idle = 3 will select the age-threshold based approach. + Setting gc_idle = 0(default) will disable this option. Setting: + + =========== =============================================== + gc_idle = 1 will select the Cost Benefit approach & setting + gc_idle = 2 will select the greedy approach & setting + gc_idle = 3 will select the age-threshold based approach. + =========== =============================================== What: /sys/fs/f2fs/<disk>/reclaim_segments Date: October 2013 @@ -46,10 +49,17 @@ Date: November 2013 Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> Description: Controls the in-place-update policy. updates in f2fs. User can set: - 0x01: F2FS_IPU_FORCE, 0x02: F2FS_IPU_SSR, - 0x04: F2FS_IPU_UTIL, 0x08: F2FS_IPU_SSR_UTIL, - 0x10: F2FS_IPU_FSYNC, 0x20: F2FS_IPU_ASYNC, - 0x40: F2FS_IPU_NOCACHE. + + ==== ================= + 0x01 F2FS_IPU_FORCE + 0x02 F2FS_IPU_SSR + 0x04 F2FS_IPU_UTIL + 0x08 F2FS_IPU_SSR_UTIL + 0x10 F2FS_IPU_FSYNC + 0x20 F2FS_IPU_ASYNC, + 0x40 F2FS_IPU_NOCACHE + ==== ================= + Refer segment.h for details. What: /sys/fs/f2fs/<disk>/min_ipu_util @@ -332,18 +342,28 @@ Date: April 2020 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> Description: Give a way to attach REQ_META|FUA to data writes given temperature-based bits. Now the bits indicate: - * REQ_META | REQ_FUA | - * 5 | 4 | 3 | 2 | 1 | 0 | - * Cold | Warm | Hot | Cold | Warm | Hot | + + +-------------------+-------------------+ + | REQ_META | REQ_FUA | + +------+------+-----+------+------+-----+ + | 5 | 4 | 3 | 2 | 1 | 0 | + +------+------+-----+------+------+-----+ + | Cold | Warm | Hot | Cold | Warm | Hot | + +------+------+-----+------+------+-----+ What: /sys/fs/f2fs/<disk>/node_io_flag Date: June 2020 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> Description: Give a way to attach REQ_META|FUA to node writes given temperature-based bits. Now the bits indicate: - * REQ_META | REQ_FUA | - * 5 | 4 | 3 | 2 | 1 | 0 | - * Cold | Warm | Hot | Cold | Warm | Hot | + + +-------------------+-------------------+ + | REQ_META | REQ_FUA | + +------+------+-----+------+------+-----+ + | 5 | 4 | 3 | 2 | 1 | 0 | + +------+------+-----+------+------+-----+ + | Cold | Warm | Hot | Cold | Warm | Hot | + +------+------+-----+------+------+-----+ What: /sys/fs/f2fs/<disk>/iostat_period_ms Date: April 2020 diff --git a/Documentation/ABI/testing/sysfs-hypervisor-xen b/Documentation/ABI/testing/sysfs-hypervisor-xen index 53b7b2ea7515..4dbe0c49b393 100644 --- a/Documentation/ABI/testing/sysfs-hypervisor-xen +++ b/Documentation/ABI/testing/sysfs-hypervisor-xen @@ -15,14 +15,17 @@ KernelVersion: 4.3 Contact: Boris Ostrovsky <boris.ostrovsky@oracle.com> Description: If running under Xen: Describes mode that Xen's performance-monitoring unit (PMU) - uses. Accepted values are - "off" -- PMU is disabled - "self" -- The guest can profile itself - "hv" -- The guest can profile itself and, if it is + uses. Accepted values are: + + ====== ============================================ + "off" PMU is disabled + "self" The guest can profile itself + "hv" The guest can profile itself and, if it is privileged (e.g. dom0), the hypervisor - "all" -- The guest can profile itself, the hypervisor + "all" The guest can profile itself, the hypervisor and all other guests. Only available to privileged guests. + ====== ============================================ What: /sys/hypervisor/pmu/pmu_features Date: August 2015 diff --git a/Documentation/ABI/testing/sysfs-kernel-boot_params b/Documentation/ABI/testing/sysfs-kernel-boot_params index eca38ce2852d..7f9bda453c4d 100644 --- a/Documentation/ABI/testing/sysfs-kernel-boot_params +++ b/Documentation/ABI/testing/sysfs-kernel-boot_params @@ -23,16 +23,17 @@ Description: The /sys/kernel/boot_params directory contains two representation of setup_data type. "data" file is the binary representation of setup_data payload. - The whole boot_params directory structure is like below: - /sys/kernel/boot_params - |__ data - |__ setup_data - | |__ 0 - | | |__ data - | | |__ type - | |__ 1 - | |__ data - | |__ type - |__ version + The whole boot_params directory structure is like below:: + + /sys/kernel/boot_params + |__ data + |__ setup_data + | |__ 0 + | | |__ data + | | |__ type + | |__ 1 + | |__ data + | |__ type + |__ version Users: Kexec diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-hugepages b/Documentation/ABI/testing/sysfs-kernel-mm-hugepages index fdaa2162fae1..294387e2c7fb 100644 --- a/Documentation/ABI/testing/sysfs-kernel-mm-hugepages +++ b/Documentation/ABI/testing/sysfs-kernel-mm-hugepages @@ -7,9 +7,11 @@ Description: of the hugepages supported by the kernel/CPU combination. Under these directories are a number of files: - nr_hugepages - nr_overcommit_hugepages - free_hugepages - surplus_hugepages - resv_hugepages + + - nr_hugepages + - nr_overcommit_hugepages + - free_hugepages + - surplus_hugepages + - resv_hugepages + See Documentation/admin-guide/mm/hugetlbpage.rst for details. diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-ksm b/Documentation/ABI/testing/sysfs-kernel-mm-ksm index dfc13244cda3..1c9bed5595f5 100644 --- a/Documentation/ABI/testing/sysfs-kernel-mm-ksm +++ b/Documentation/ABI/testing/sysfs-kernel-mm-ksm @@ -34,8 +34,9 @@ Description: Kernel Samepage Merging daemon sysfs interface in a tree. run: write 0 to disable ksm, read 0 while ksm is disabled. - write 1 to run ksm, read 1 while ksm is running. - write 2 to disable ksm and unmerge all its pages. + + - write 1 to run ksm, read 1 while ksm is running. + - write 2 to disable ksm and unmerge all its pages. sleep_millisecs: how many milliseconds ksm should sleep between scans. diff --git a/Documentation/ABI/testing/sysfs-kernel-slab b/Documentation/ABI/testing/sysfs-kernel-slab index ed35833ad7f0..c9f12baf8baa 100644 --- a/Documentation/ABI/testing/sysfs-kernel-slab +++ b/Documentation/ABI/testing/sysfs-kernel-slab @@ -346,6 +346,7 @@ Description: number of objects per slab. If a slab cannot be allocated because of fragmentation, SLUB will retry with the minimum order possible depending on its characteristics. + When debug_guardpage_minorder=N (N > 0) parameter is specified (see Documentation/admin-guide/kernel-parameters.rst), the minimum possible order is used and this sysfs entry can not be used to change @@ -361,6 +362,7 @@ Description: new slab has not been possible at the cache's order and instead fallen back to its minimum possible order. It can be written to clear the current count. + Available when CONFIG_SLUB_STATS is enabled. What: /sys/kernel/slab/cache/partial @@ -410,6 +412,7 @@ Description: slab from a remote node as opposed to allocating a new slab on the local node. This reduces the amount of wasted memory over the entire system but can be expensive. + Available when CONFIG_NUMA is enabled. What: /sys/kernel/slab/cache/sanity_checks diff --git a/Documentation/ABI/testing/sysfs-module b/Documentation/ABI/testing/sysfs-module index 0aac02e7fb0e..353c0db5bc1f 100644 --- a/Documentation/ABI/testing/sysfs-module +++ b/Documentation/ABI/testing/sysfs-module @@ -17,14 +17,15 @@ KernelVersion: 3.1 Contact: Kirill Smelkov <kirr@mns.spb.ru> Description: Maximum time allowed for periodic transfers per microframe (μs) - [ USB 2.0 sets maximum allowed time for periodic transfers per + Note: + USB 2.0 sets maximum allowed time for periodic transfers per microframe to be 80%, that is 100 microseconds out of 125 microseconds (full microframe). However there are cases, when 80% max isochronous bandwidth is too limiting. For example two video streams could require 110 microseconds of isochronous bandwidth per microframe to work - together. ] + together. Through this setting it is possible to raise the limit so that the host controller would allow allocating more than 100 @@ -45,8 +46,10 @@ Date: Jan 2012 KernelVersion:»·3.3 Contact: Kay Sievers <kay.sievers@vrfy.org> Description: Module taint flags: - P - proprietary module - O - out-of-tree module - F - force-loaded module - C - staging driver module - E - unsigned module + == ===================== + P proprietary module + O out-of-tree module + F force-loaded module + C staging driver module + E unsigned module + == ===================== diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop index 8b0e8205a6a2..c78d358dbdbe 100644 --- a/Documentation/ABI/testing/sysfs-platform-asus-laptop +++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop @@ -4,13 +4,16 @@ KernelVersion: 2.6.20 Contact: "Corentin Chary" <corentincj@iksaif.net> Description: This file allows display switching. The value - is composed by 4 bits and defined as follow: - 4321 - |||`- LCD - ||`-- CRT - |`--- TV - `---- DVI - Ex: - 0 (0000b) means no display + is composed by 4 bits and defined as follow:: + + 4321 + |||`- LCD + ||`-- CRT + |`--- TV + `---- DVI + + Ex: + - 0 (0000b) means no display - 3 (0011b) CRT+LCD. What: /sys/devices/platform/asus_laptop/gps @@ -28,8 +31,10 @@ Contact: "Corentin Chary" <corentincj@iksaif.net> Description: Some models like the W1N have a LED display that can be used to display several items of information. - To control the LED display, use the following : + To control the LED display, use the following:: + echo 0x0T000DDD > /sys/devices/platform/asus_laptop/ + where T control the 3 letters display, and DDD the 3 digits display. The DDD table can be found in Documentation/admin-guide/laptops/asus-laptop.rst diff --git a/Documentation/ABI/testing/sysfs-platform-asus-wmi b/Documentation/ABI/testing/sysfs-platform-asus-wmi index 1efac0ddb417..04885738cf15 100644 --- a/Documentation/ABI/testing/sysfs-platform-asus-wmi +++ b/Documentation/ABI/testing/sysfs-platform-asus-wmi @@ -5,6 +5,7 @@ Contact: "Corentin Chary" <corentincj@iksaif.net> Description: Change CPU clock configuration (write-only). There are three available clock configuration: + * 0 -> Super Performance Mode * 1 -> High Performance Mode * 2 -> Power Saving Mode diff --git a/Documentation/ABI/testing/sysfs-platform-at91 b/Documentation/ABI/testing/sysfs-platform-at91 index 4cc6a865ae66..b146be74b8e0 100644 --- a/Documentation/ABI/testing/sysfs-platform-at91 +++ b/Documentation/ABI/testing/sysfs-platform-at91 @@ -18,8 +18,10 @@ Description: In order to use an extended can_id add the CAN_EFF_FLAG (0x80000000U) to the can_id. Example: - - standard id 0x7ff: - echo 0x7ff > /sys/class/net/can0/mb0_id + - standard id 0x7ff:: - - extended id 0x1fffffff: - echo 0x9fffffff > /sys/class/net/can0/mb0_id + echo 0x7ff > /sys/class/net/can0/mb0_id + + - extended id 0x1fffffff:: + + echo 0x9fffffff > /sys/class/net/can0/mb0_id diff --git a/Documentation/ABI/testing/sysfs-platform-dell-laptop b/Documentation/ABI/testing/sysfs-platform-dell-laptop index 9b917c7453de..82bcfe9df66e 100644 --- a/Documentation/ABI/testing/sysfs-platform-dell-laptop +++ b/Documentation/ABI/testing/sysfs-platform-dell-laptop @@ -34,9 +34,12 @@ Description: this file. To disable a trigger, write its name preceded by '-' instead. - For example, to enable the keyboard as trigger run: + For example, to enable the keyboard as trigger run:: + echo +keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers - To disable it: + + To disable it:: + echo -keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers Note that not all the available triggers can be configured. @@ -57,7 +60,8 @@ Description: with any the above units. If no unit is specified, the value is assumed to be expressed in seconds. - For example, to set the timeout to 10 minutes run: + For example, to set the timeout to 10 minutes run:: + echo 10m > /sys/class/leds/dell::kbd_backlight/stop_timeout Note that when this file is read, the returned value might be diff --git a/Documentation/ABI/testing/sysfs-platform-dell-smbios b/Documentation/ABI/testing/sysfs-platform-dell-smbios index 205d3b6361e0..e6e0f7f834a7 100644 --- a/Documentation/ABI/testing/sysfs-platform-dell-smbios +++ b/Documentation/ABI/testing/sysfs-platform-dell-smbios @@ -13,8 +13,8 @@ Description: For example the token ID "5" would be available as the following attributes: - 0005_location - 0005_value + - 0005_location + - 0005_value Tokens will vary from machine to machine, and only tokens available on that machine will be diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-fme b/Documentation/ABI/testing/sysfs-platform-dfl-fme index 3683cb1cdc3d..d6ab34e81b9b 100644 --- a/Documentation/ABI/testing/sysfs-platform-dfl-fme +++ b/Documentation/ABI/testing/sysfs-platform-dfl-fme @@ -113,8 +113,11 @@ KernelVersion: 5.5 Contact: Wu Hao <hao.wu@intel.com> Description: Read-Only. Read this file to get the name of hwmon device, it supports values: - 'dfl_fme_thermal' - thermal hwmon device name - 'dfl_fme_power' - power hwmon device name + + ================= ========================= + 'dfl_fme_thermal' thermal hwmon device name + 'dfl_fme_power' power hwmon device name + ================= ========================= What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_input Date: October 2019 @@ -169,8 +172,11 @@ KernelVersion: 5.5 Contact: Wu Hao <hao.wu@intel.com> Description: Read-Only. Read this file to get the policy of hardware threshold1 (see 'temp1_max'). It only supports two values (policies): - 0 - AP2 state (90% throttling) - 1 - AP1 state (50% throttling) + + == ========================== + 0 AP2 state (90% throttling) + 1 AP1 state (50% throttling) + == ========================== What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_input Date: October 2019 diff --git a/Documentation/ABI/testing/sysfs-platform-dptf b/Documentation/ABI/testing/sysfs-platform-dptf index 2cbc660d163b..141834342a4d 100644 --- a/Documentation/ABI/testing/sysfs-platform-dptf +++ b/Documentation/ABI/testing/sysfs-platform-dptf @@ -27,12 +27,15 @@ KernelVersion: v4.10 Contact: linux-acpi@vger.kernel.org Description: (RO) Display the platform power source + + ========= ============================ bits[3:0] Current power source - 0x00 = DC - 0x01 = AC - 0x02 = USB - 0x03 = Wireless Charger + - 0x00 = DC + - 0x01 = AC + - 0x02 = USB + - 0x03 = Wireless Charger bits[7:4] Power source sequence number + ========= ============================ What: /sys/bus/platform/devices/INT3407:00/dptf_power/battery_steady_power Date: Jul, 2016 diff --git a/Documentation/ABI/testing/sysfs-platform-eeepc-laptop b/Documentation/ABI/testing/sysfs-platform-eeepc-laptop index 5b026c69587a..70dbe0733cf6 100644 --- a/Documentation/ABI/testing/sysfs-platform-eeepc-laptop +++ b/Documentation/ABI/testing/sysfs-platform-eeepc-laptop @@ -4,9 +4,11 @@ KernelVersion: 2.6.26 Contact: "Corentin Chary" <corentincj@iksaif.net> Description: This file allows display switching. + - 1 = LCD - 2 = CRT - 3 = LCD+CRT + If you run X11, you should use xrandr instead. What: /sys/devices/platform/eeepc/camera @@ -30,16 +32,20 @@ Contact: "Corentin Chary" <corentincj@iksaif.net> Description: Change CPU clock configuration. On the Eee PC 1000H there are three available clock configuration: + * 0 -> Super Performance Mode * 1 -> High Performance Mode * 2 -> Power Saving Mode + On Eee PC 701 there is only 2 available clock configurations. Available configuration are listed in available_cpufv file. Reading this file will show the raw hexadecimal value which - is defined as follow: - | 8 bit | 8 bit | - | `---- Current mode - `------------ Availables modes + is defined as follow:: + + | 8 bit | 8 bit | + | `---- Current mode + `------------ Availables modes + For example, 0x301 means: mode 1 selected, 3 available modes. What: /sys/devices/platform/eeepc/available_cpufv diff --git a/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl b/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl index c394b808be19..b6a138b50d99 100644 --- a/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl +++ b/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl @@ -5,9 +5,9 @@ Contact: Wolfram Sang <wsa+renesas@sang-engineering.com> Description: Reading the file will give you a list of masters which can be selected for a demultiplexed bus. The format is - "<index>:<name>". Example from a Renesas Lager board: + "<index>:<name>". Example from a Renesas Lager board:: - 0:/i2c@e6500000 1:/i2c@e6508000 + 0:/i2c@e6500000 1:/i2c@e6508000 What: /sys/devices/platform/<i2c-demux-name>/current_master Date: January 2016 diff --git a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop index 1b31be3f996a..fd2ac02bc5bd 100644 --- a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop +++ b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop @@ -12,6 +12,7 @@ Contact: "Maxim Mikityanskiy <maxtram95@gmail.com>" Description: Change fan mode There are four available modes: + * 0 -> Super Silent Mode * 1 -> Standard Mode * 2 -> Dust Cleaning @@ -32,9 +33,11 @@ KernelVersion: 4.18 Contact: "Oleg Keri <ezhi99@gmail.com>" Description: Control fn-lock mode. + * 1 -> Switched On * 0 -> Switched Off - For example: - # echo "0" > \ - /sys/bus/pci/devices/0000:00:1f.0/PNP0C09:00/VPC2004:00/fn_lock + For example:: + + # echo "0" > \ + /sys/bus/pci/devices/0000:00:1f.0/PNP0C09:00/VPC2004:00/fn_lock diff --git a/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update b/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update index 5aa618987cad..02ae1e9bbfc8 100644 --- a/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update +++ b/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update @@ -8,5 +8,6 @@ Description: of 0 and userspace can signal SBL to update firmware, on next reboot, by writing a value of 1. There are two available states: + * 0 -> Skip firmware update while rebooting * 1 -> Attempt firmware update on next reboot diff --git a/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt b/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt index 8af65059d519..e19144fd5d86 100644 --- a/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt +++ b/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt @@ -7,5 +7,6 @@ Description: Thunderbolt controllers to turn on or off when no devices are connected (write-only) There are two available states: + * 0 -> Force power disabled * 1 -> Force power enabled diff --git a/Documentation/ABI/testing/sysfs-platform-kim b/Documentation/ABI/testing/sysfs-platform-kim index c1653271872a..a7f81de68046 100644 --- a/Documentation/ABI/testing/sysfs-platform-kim +++ b/Documentation/ABI/testing/sysfs-platform-kim @@ -5,6 +5,7 @@ Contact: "Pavan Savoy" <pavan_savoy@ti.com> Description: Name of the UART device at which the WL128x chip is connected. example: "/dev/ttyS0". + The device name flows down to architecture specific board initialization file from the SFI/ATAGS bootloader firmware. The name exposed is read from the user-space diff --git a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl index 401d202f478b..e79ca22e2f45 100644 --- a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl +++ b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl @@ -5,10 +5,13 @@ Contact: "Liming Sun <lsun@mellanox.com>" Description: The Life-cycle state of the SoC, which could be one of the following values. - Production - Production state and can be updated to secure - GA Secured - Secure chip and not able to change state - GA Non-Secured - Non-Secure chip and not able to change state - RMA - Return Merchandise Authorization + + ============== ============================================= + Production Production state and can be updated to secure + GA Secured Secure chip and not able to change state + GA Non-Secured Non-Secure chip and not able to change state + RMA Return Merchandise Authorization + ============== ============================================= What: /sys/bus/platform/devices/MLNXBF04:00/post_reset_wdog Date: Oct 2019 @@ -25,10 +28,13 @@ KernelVersion: 5.5 Contact: "Liming Sun <lsun@mellanox.com>" Description: The source of the boot stream for the next reset. It could be - one of the following values. - external - boot from external source (USB or PCIe) - emmc - boot from the onchip eMMC - emmc_legacy - boot from the onchip eMMC in legacy (slow) mode + one of the following values: + + =========== =============================================== + external boot from external source (USB or PCIe) + emmc boot from the onchip eMMC + emmc_legacy boot from the onchip eMMC in legacy (slow) mode + =========== =============================================== What: /sys/bus/platform/devices/MLNXBF04:00/second_reset_action Date: Oct 2019 @@ -38,11 +44,14 @@ Description: Update the source of the boot stream after next reset. It could be one of the following values and will be applied after next reset. - external - boot from external source (USB or PCIe) - emmc - boot from the onchip eMMC - emmc_legacy - boot from the onchip eMMC in legacy (slow) mode - swap_emmc - swap the primary / secondary boot partition - none - cancel the action + + =========== =============================================== + external boot from external source (USB or PCIe) + emmc boot from the onchip eMMC + emmc_legacy boot from the onchip eMMC in legacy (slow) mode + swap_emmc swap the primary / secondary boot partition + none cancel the action + =========== =============================================== What: /sys/bus/platform/devices/MLNXBF04:00/secure_boot_fuse_state Date: Oct 2019 @@ -50,9 +59,12 @@ KernelVersion: 5.5 Contact: "Liming Sun <lsun@mellanox.com>" Description: The state of eFuse versions with the following values. - InUse - burnt, valid and currently in use - Used - burnt and valid - Free - not burnt and free to use - Skipped - not burnt but not free (skipped) - Wasted - burnt and invalid - Invalid - not burnt but marked as valid (error state). + + ======= =============================================== + InUse burnt, valid and currently in use + Used burnt and valid + Free not burnt and free to use + Skipped not burnt but not free (skipped) + Wasted burnt and invalid + Invalid not burnt but marked as valid (error state). + ======= =============================================== diff --git a/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2 b/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2 index 6212697bbf6f..bc510ccc37a7 100644 --- a/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2 +++ b/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2 @@ -7,9 +7,11 @@ Description: The file can show/change the phy mode for role swap of usb. Write the following strings to change the mode: - "host" - switching mode from peripheral to host. - "peripheral" - switching mode from host to peripheral. + + - "host" - switching mode from peripheral to host. + - "peripheral" - switching mode from host to peripheral. Read the file, then it shows the following strings: - "host" - The mode is host now. - "peripheral" - The mode is peripheral now. + + - "host" - The mode is host now. + - "peripheral" - The mode is peripheral now. diff --git a/Documentation/ABI/testing/sysfs-platform-renesas_usb3 b/Documentation/ABI/testing/sysfs-platform-renesas_usb3 index 5621c15d5dc0..8af5b9c3fabb 100644 --- a/Documentation/ABI/testing/sysfs-platform-renesas_usb3 +++ b/Documentation/ABI/testing/sysfs-platform-renesas_usb3 @@ -7,9 +7,11 @@ Description: The file can show/change the drd mode of usb. Write the following string to change the mode: - "host" - switching mode from peripheral to host. - "peripheral" - switching mode from host to peripheral. + + - "host" - switching mode from peripheral to host. + - "peripheral" - switching mode from host to peripheral. Read the file, then it shows the following strings: - "host" - The mode is host now. - "peripheral" - The mode is peripheral now. + + - "host" - The mode is host now. + - "peripheral" - The mode is peripheral now. diff --git a/Documentation/ABI/testing/sysfs-platform-sst-atom b/Documentation/ABI/testing/sysfs-platform-sst-atom index 0d07c0395660..d5f6e21f0e42 100644 --- a/Documentation/ABI/testing/sysfs-platform-sst-atom +++ b/Documentation/ABI/testing/sysfs-platform-sst-atom @@ -5,13 +5,22 @@ Contact: "Sebastien Guiriec" <sebastien.guiriec@intel.com> Description: LPE Firmware version for SST driver on all atom plaforms (BYT/CHT/Merrifield/BSW). - If the FW has never been loaded it will display: + If the FW has never been loaded it will display:: + "FW not yet loaded" - If FW has been loaded it will display: + + If FW has been loaded it will display:: + "v01.aa.bb.cc" + aa: Major version is reflecting SoC version: + + === ============= 0d: BYT FW 0b: BSW FW 07: Merrifield FW + === ============= + bb: Minor version + cc: Build version diff --git a/Documentation/ABI/testing/sysfs-platform-usbip-vudc b/Documentation/ABI/testing/sysfs-platform-usbip-vudc index 81fcfb454913..53622d3ba27c 100644 --- a/Documentation/ABI/testing/sysfs-platform-usbip-vudc +++ b/Documentation/ABI/testing/sysfs-platform-usbip-vudc @@ -16,10 +16,13 @@ Contact: Krzysztof Opasiak <k.opasiak@samsung.com> Description: Current status of the device. Allowed values: - 1 - Device is available and can be exported - 2 - Device is currently exported - 3 - Fatal error occurred during communication - with peer + + == ========================================== + 1 Device is available and can be exported + 2 Device is currently exported + 3 Fatal error occurred during communication + with peer + == ========================================== What: /sys/devices/platform/usbip-vudc.%d/usbip_sockfd Date: April 2016 diff --git a/Documentation/ABI/testing/sysfs-platform-wilco-ec b/Documentation/ABI/testing/sysfs-platform-wilco-ec index 5f60b184a5a5..4439d0644091 100644 --- a/Documentation/ABI/testing/sysfs-platform-wilco-ec +++ b/Documentation/ABI/testing/sysfs-platform-wilco-ec @@ -39,6 +39,7 @@ Description: which affects charging via the special USB PowerShare port (marked with a small lightning bolt or battery icon) when in low power states: + - In S0, the port will always provide power. - In S0ix, if usb_charge is enabled, then power will be supplied to the port when on AC or if battery is > 50%. diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index 5e6ead29124c..51c0f578bfce 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -47,14 +47,18 @@ Description: suspend-to-disk mechanism. Reading from this file returns the name of the method by which the system will be put to sleep on the next suspend. There are four methods supported: + 'firmware' - means that the memory image will be saved to disk by some firmware, in which case we also assume that the firmware will handle the system suspend. + 'platform' - the memory image will be saved by the kernel and the system will be put to sleep by the platform driver (e.g. ACPI or other PM registers). + 'shutdown' - the memory image will be saved by the kernel and the system will be powered off. + 'reboot' - the memory image will be saved by the kernel and the system will be rebooted. @@ -74,12 +78,12 @@ Description: The suspend-to-disk method may be chosen by writing to this file one of the accepted strings: - 'firmware' - 'platform' - 'shutdown' - 'reboot' - 'testproc' - 'test' + - 'firmware' + - 'platform' + - 'shutdown' + - 'reboot' + - 'testproc' + - 'test' It will only change to 'firmware' or 'platform' if the system supports that. @@ -114,9 +118,9 @@ Description: string representing a nonzero integer into it. To use this debugging feature you should attempt to suspend - the machine, then reboot it and run + the machine, then reboot it and run:: - dmesg -s 1000000 | grep 'hash matches' + dmesg -s 1000000 | grep 'hash matches' If you do not get any matches (or they appear to be false positives), it is possible that the last PM event point @@ -244,6 +248,7 @@ Description: wakeup sources created with the help of /sys/power/wake_lock. When a string is written to /sys/power/wake_unlock, it will be assumed to represent the name of a wakeup source to deactivate. + If a wakeup source object of that name exists and is active at the moment, it will be deactivated. diff --git a/Documentation/ABI/testing/sysfs-profiling b/Documentation/ABI/testing/sysfs-profiling index 8a8e466eb2c0..e39dd3a0ceef 100644 --- a/Documentation/ABI/testing/sysfs-profiling +++ b/Documentation/ABI/testing/sysfs-profiling @@ -5,7 +5,7 @@ Description: /sys/kernel/profiling is the runtime equivalent of the boot-time profile= option. - You can get the same effect running: + You can get the same effect running:: echo 2 > /sys/kernel/profiling diff --git a/Documentation/ABI/testing/sysfs-ptp b/Documentation/ABI/testing/sysfs-ptp index a17f817a9309..2363ad810ddb 100644 --- a/Documentation/ABI/testing/sysfs-ptp +++ b/Documentation/ABI/testing/sysfs-ptp @@ -69,7 +69,7 @@ Description: pin offered by the PTP hardware clock. The file name is the hardware dependent pin name. Reading from this file produces two numbers, the assigned function (see - the PTP_PF_ enumeration values in linux/ptp_clock.h) + the `PTP_PF_` enumeration values in linux/ptp_clock.h) and the channel number. The function and channel assignment may be changed by two writing numbers into the file. diff --git a/Documentation/ABI/testing/sysfs-uevent b/Documentation/ABI/testing/sysfs-uevent index aa39f8d7bcdf..0b6227706b35 100644 --- a/Documentation/ABI/testing/sysfs-uevent +++ b/Documentation/ABI/testing/sysfs-uevent @@ -6,42 +6,46 @@ Description: Enable passing additional variables for synthetic uevents that are generated by writing /sys/.../uevent file. - Recognized extended format is ACTION [UUID [KEY=VALUE ...]. + Recognized extended format is:: - The ACTION is compulsory - it is the name of the uevent action - ("add", "change", "remove"). There is no change compared to - previous functionality here. The rest of the extended format - is optional. + ACTION [UUID [KEY=VALUE ...] + + The ACTION is compulsory - it is the name of the uevent + action (``add``, ``change``, ``remove``). There is no change + compared to previous functionality here. The rest of the + extended format is optional. You need to pass UUID first before any KEY=VALUE pairs. - The UUID must be in "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" + The UUID must be in ``xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx`` format where 'x' is a hex digit. The UUID is considered to be a transaction identifier so it's possible to use the same UUID value for one or more synthetic uevents in which case we logically group these uevents together for any userspace listeners. The UUID value appears in uevent as - "SYNTH_UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" environment + ``SYNTH_UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx`` environment variable. If UUID is not passed in, the generated synthetic uevent gains - "SYNTH_UUID=0" environment variable automatically. + ``SYNTH_UUID=0`` environment variable automatically. The KEY=VALUE pairs can contain alphanumeric characters only. + It's possible to define zero or more pairs - each pair is then delimited by a space character ' '. Each pair appears in - synthetic uevent as "SYNTH_ARG_KEY=VALUE". That means the KEY - name gains "SYNTH_ARG_" prefix to avoid possible collisions + synthetic uevent as ``SYNTH_ARG_KEY=VALUE``. That means the KEY + name gains ``SYNTH_ARG_`` prefix to avoid possible collisions with existing variables. - Example of valid sequence written to the uevent file: + Example of valid sequence written to the uevent file:: add fe4d7c9d-b8c6-4a70-9ef1-3d8a58d18eed A=1 B=abc - This generates synthetic uevent including these variables: + This generates synthetic uevent including these variables:: ACTION=add SYNTH_ARG_A=1 SYNTH_ARG_B=abc SYNTH_UUID=fe4d7c9d-b8c6-4a70-9ef1-3d8a58d18eed + Users: udev, userspace tools generating synthetic uevents diff --git a/Documentation/ABI/testing/sysfs-wusb_cbaf b/Documentation/ABI/testing/sysfs-wusb_cbaf index a99c5f86a37a..2969d3694ec0 100644 --- a/Documentation/ABI/testing/sysfs-wusb_cbaf +++ b/Documentation/ABI/testing/sysfs-wusb_cbaf @@ -45,7 +45,8 @@ Description: 7. Device is unplugged. References: - [WUSB-AM] Association Models Supplement to the + [WUSB-AM] + Association Models Supplement to the Certified Wireless Universal Serial Bus Specification, version 1.0. diff --git a/Documentation/ABI/testing/usb-charger-uevent b/Documentation/ABI/testing/usb-charger-uevent index 419a92dd0d86..1db89b0cf80f 100644 --- a/Documentation/ABI/testing/usb-charger-uevent +++ b/Documentation/ABI/testing/usb-charger-uevent @@ -3,44 +3,52 @@ Date: 2020-01-14 KernelVersion: 5.6 Contact: linux-usb@vger.kernel.org Description: There are two USB charger states: - USB_CHARGER_ABSENT - USB_CHARGER_PRESENT + + - USB_CHARGER_ABSENT + - USB_CHARGER_PRESENT + There are five USB charger types: - USB_CHARGER_UNKNOWN_TYPE: Charger type is unknown - USB_CHARGER_SDP_TYPE: Standard Downstream Port - USB_CHARGER_CDP_TYPE: Charging Downstream Port - USB_CHARGER_DCP_TYPE: Dedicated Charging Port - USB_CHARGER_ACA_TYPE: Accessory Charging Adapter + + ======================== ========================== + USB_CHARGER_UNKNOWN_TYPE Charger type is unknown + USB_CHARGER_SDP_TYPE Standard Downstream Port + USB_CHARGER_CDP_TYPE Charging Downstream Port + USB_CHARGER_DCP_TYPE Dedicated Charging Port + USB_CHARGER_ACA_TYPE Accessory Charging Adapter + ======================== ========================== + https://www.usb.org/document-library/battery-charging-v12-spec-and-adopters-agreement - Here are two examples taken using udevadm monitor -p when - USB charger is online: - UDEV change /devices/soc0/usbphynop1 (platform) - ACTION=change - DEVPATH=/devices/soc0/usbphynop1 - DRIVER=usb_phy_generic - MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv - OF_COMPATIBLE_0=usb-nop-xceiv - OF_COMPATIBLE_N=1 - OF_FULLNAME=/usbphynop1 - OF_NAME=usbphynop1 - SEQNUM=2493 - SUBSYSTEM=platform - USB_CHARGER_STATE=USB_CHARGER_PRESENT - USB_CHARGER_TYPE=USB_CHARGER_SDP_TYPE - USEC_INITIALIZED=227422826 - - USB charger is offline: - KERNEL change /devices/soc0/usbphynop1 (platform) - ACTION=change - DEVPATH=/devices/soc0/usbphynop1 - DRIVER=usb_phy_generic - MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv - OF_COMPATIBLE_0=usb-nop-xceiv - OF_COMPATIBLE_N=1 - OF_FULLNAME=/usbphynop1 - OF_NAME=usbphynop1 - SEQNUM=2494 - SUBSYSTEM=platform - USB_CHARGER_STATE=USB_CHARGER_ABSENT - USB_CHARGER_TYPE=USB_CHARGER_UNKNOWN_TYPE + Here are two examples taken using ``udevadm monitor -p`` when + USB charger is online:: + + UDEV change /devices/soc0/usbphynop1 (platform) + ACTION=change + DEVPATH=/devices/soc0/usbphynop1 + DRIVER=usb_phy_generic + MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv + OF_COMPATIBLE_0=usb-nop-xceiv + OF_COMPATIBLE_N=1 + OF_FULLNAME=/usbphynop1 + OF_NAME=usbphynop1 + SEQNUM=2493 + SUBSYSTEM=platform + USB_CHARGER_STATE=USB_CHARGER_PRESENT + USB_CHARGER_TYPE=USB_CHARGER_SDP_TYPE + USEC_INITIALIZED=227422826 + + USB charger is offline:: + + KERNEL change /devices/soc0/usbphynop1 (platform) + ACTION=change + DEVPATH=/devices/soc0/usbphynop1 + DRIVER=usb_phy_generic + MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv + OF_COMPATIBLE_0=usb-nop-xceiv + OF_COMPATIBLE_N=1 + OF_FULLNAME=/usbphynop1 + OF_NAME=usbphynop1 + SEQNUM=2494 + SUBSYSTEM=platform + USB_CHARGER_STATE=USB_CHARGER_ABSENT + USB_CHARGER_TYPE=USB_CHARGER_UNKNOWN_TYPE diff --git a/Documentation/ABI/testing/usb-uevent b/Documentation/ABI/testing/usb-uevent index d35c3cad892c..2b8eca4bf2b1 100644 --- a/Documentation/ABI/testing/usb-uevent +++ b/Documentation/ABI/testing/usb-uevent @@ -6,22 +6,22 @@ Description: When the USB Host Controller has entered a state where it is no longer functional a uevent will be raised. The uevent will contain ACTION=offline and ERROR=DEAD. - Here is an example taken using udevadm monitor -p: + Here is an example taken using udevadm monitor -p:: - KERNEL[130.428945] offline /devices/pci0000:00/0000:00:10.0/usb2 (usb) - ACTION=offline - BUSNUM=002 - DEVNAME=/dev/bus/usb/002/001 - DEVNUM=001 - DEVPATH=/devices/pci0000:00/0000:00:10.0/usb2 - DEVTYPE=usb_device - DRIVER=usb - ERROR=DEAD - MAJOR=189 - MINOR=128 - PRODUCT=1d6b/2/414 - SEQNUM=2168 - SUBSYSTEM=usb - TYPE=9/0/1 + KERNEL[130.428945] offline /devices/pci0000:00/0000:00:10.0/usb2 (usb) + ACTION=offline + BUSNUM=002 + DEVNAME=/dev/bus/usb/002/001 + DEVNUM=001 + DEVPATH=/devices/pci0000:00/0000:00:10.0/usb2 + DEVTYPE=usb_device + DRIVER=usb + ERROR=DEAD + MAJOR=189 + MINOR=128 + PRODUCT=1d6b/2/414 + SEQNUM=2168 + SUBSYSTEM=usb + TYPE=9/0/1 Users: chromium-os-dev@chromium.org diff --git a/Documentation/Kconfig b/Documentation/Kconfig index 66046fa1c341..e549a61f4d96 100644 --- a/Documentation/Kconfig +++ b/Documentation/Kconfig @@ -10,4 +10,14 @@ config WARN_MISSING_DOCUMENTS If unsure, select 'N'. +config WARN_ABI_ERRORS + bool "Warn if there are errors at ABI files" + depends on COMPILE_TEST + help + The files under Documentation/ABI should follow what's + described at Documentation/ABI/README. Yet, as they're manually + written, it would be possible that some of those files would + have errors that would break them for being parsed by + scripts/get_abi.pl. Add a check to verify them. + If unsure, select 'N'. diff --git a/Documentation/Makefile b/Documentation/Makefile index 6b12dd82f712..61a7310b49e0 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -10,6 +10,11 @@ ifeq ($(CONFIG_WARN_MISSING_DOCUMENTS),y) $(shell $(srctree)/scripts/documentation-file-ref-check --warn) endif +# Check for broken ABI files +ifeq ($(CONFIG_WARN_ABI_ERRORS),y) +$(shell $(srctree)/scripts/get_abi.pl validate --dir $(srctree)/Documentation/ABI) +endif + # You can set these variables from the command line. SPHINXBUILD = sphinx-build SPHINXOPTS = @@ -21,6 +26,10 @@ BUILDDIR = $(obj)/output PDFLATEX = xelatex LATEXOPTS = -interaction=batchmode +ifeq ($(KBUILD_VERBOSE),0) +SPHINXOPTS += "-q" +endif + # User-friendly check for sphinx-build HAVE_SPHINX := $(shell if which $(SPHINXBUILD) >/dev/null 2>&1; then echo 1; else echo 0; fi) diff --git a/Documentation/admin-guide/LSM/SafeSetID.rst b/Documentation/admin-guide/LSM/SafeSetID.rst index 17996c9070e2..0ec34863c674 100644 --- a/Documentation/admin-guide/LSM/SafeSetID.rst +++ b/Documentation/admin-guide/LSM/SafeSetID.rst @@ -107,7 +107,7 @@ for a UID/GID will prevent that UID/GID from obtaining auxiliary setid privileges, such as allowing a user to set up user namespace UID/GID mappings. Note on GID policies and setgroups() -================== +==================================== In v5.9 we are adding support for limiting CAP_SETGID privileges as was done previously for CAP_SETUID. However, for compatibility with common sandboxing related code conventions in userspace, we currently allow arbitrary diff --git a/Documentation/admin-guide/abi-obsolete.rst b/Documentation/admin-guide/abi-obsolete.rst new file mode 100644 index 000000000000..d095867899c5 --- /dev/null +++ b/Documentation/admin-guide/abi-obsolete.rst @@ -0,0 +1,11 @@ +ABI obsolete symbols +==================== + +Documents interfaces that are still remaining in the kernel, but are +marked to be removed at some later point in time. + +The description of the interface will document the reason why it is +obsolete and when it can be expected to be removed. + +.. kernel-abi:: $srctree/Documentation/ABI/obsolete + :rst: diff --git a/Documentation/admin-guide/abi-removed.rst b/Documentation/admin-guide/abi-removed.rst new file mode 100644 index 000000000000..f7e9e43023c1 --- /dev/null +++ b/Documentation/admin-guide/abi-removed.rst @@ -0,0 +1,5 @@ +ABI removed symbols +=================== + +.. kernel-abi:: $srctree/Documentation/ABI/removed + :rst: diff --git a/Documentation/admin-guide/abi-stable.rst b/Documentation/admin-guide/abi-stable.rst new file mode 100644 index 000000000000..70490736e0d3 --- /dev/null +++ b/Documentation/admin-guide/abi-stable.rst @@ -0,0 +1,14 @@ +ABI stable symbols +================== + +Documents the interfaces that the developer has defined to be stable. + +Userspace programs are free to use these interfaces with no +restrictions, and backward compatibility for them will be guaranteed +for at least 2 years. + +Most interfaces (like syscalls) are expected to never change and always +be available. + +.. kernel-abi:: $srctree/Documentation/ABI/stable + :rst: diff --git a/Documentation/admin-guide/abi-testing.rst b/Documentation/admin-guide/abi-testing.rst new file mode 100644 index 000000000000..b205b16a72d0 --- /dev/null +++ b/Documentation/admin-guide/abi-testing.rst @@ -0,0 +1,20 @@ +ABI testing symbols +=================== + +Documents interfaces that are felt to be stable, +as the main development of this interface has been completed. + +The interface can be changed to add new features, but the +current interface will not break by doing this, unless grave +errors or security problems are found in them. + +Userspace programs can start to rely on these interfaces, but they must +be aware of changes that can occur before these interfaces move to +be marked stable. + +Programs that use these interfaces are strongly encouraged to add their +name to the description of these interfaces, so that the kernel +developers can easily notify them if any changes occur. + +.. kernel-abi:: $srctree/Documentation/ABI/testing + :rst: diff --git a/Documentation/admin-guide/abi.rst b/Documentation/admin-guide/abi.rst new file mode 100644 index 000000000000..bcab3ef2597c --- /dev/null +++ b/Documentation/admin-guide/abi.rst @@ -0,0 +1,11 @@ +===================== +Linux ABI description +===================== + +.. toctree:: + :maxdepth: 2 + + abi-stable + abi-testing + abi-obsolete + abi-removed diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst index ed1cf94ea50c..4e0c4ae44acd 100644 --- a/Documentation/admin-guide/index.rst +++ b/Documentation/admin-guide/index.rst @@ -18,6 +18,8 @@ etc. devices sysctl/index + abi + This section describes CPU vulnerabilities and their mitigations. .. toctree:: diff --git a/Documentation/admin-guide/pm/cpuidle.rst b/Documentation/admin-guide/pm/cpuidle.rst index 37940a0584ec..10fde58d0869 100644 --- a/Documentation/admin-guide/pm/cpuidle.rst +++ b/Documentation/admin-guide/pm/cpuidle.rst @@ -478,7 +478,7 @@ order to ask the hardware to enter that state. Also, for each statistics of the given idle state. That information is exposed by the kernel via ``sysfs``. -For each CPU in the system, there is a :file:`/sys/devices/system/cpu<N>/cpuidle/` +For each CPU in the system, there is a :file:`/sys/devices/system/cpu/cpu<N>/cpuidle/` directory in ``sysfs``, where the number ``<N>`` is assigned to the given CPU at the initialization time. That directory contains a set of subdirectories called :file:`state0`, :file:`state1` and so on, up to the number of idle state @@ -494,7 +494,7 @@ object corresponding to it, as follows: residency. ``below`` - Total number of times this idle state had been asked for, but cerainly + Total number of times this idle state had been asked for, but certainly a deeper idle state would have been a better match for the observed idle duration. diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst index 57fd6ce68fe0..f2ab8a5b6a4b 100644 --- a/Documentation/admin-guide/sysctl/net.rst +++ b/Documentation/admin-guide/sysctl/net.rst @@ -300,6 +300,7 @@ Note: 0: 0 1 2 3 4 5 6 7 RSS hash key: 84:50:f4:00:a8:15:d1:a7:e9:7f:1d:60:35:c7:47:25:42:97:74:ca:56:bb:b6:a1:d8:43:e3:c9:0c:fd:17:55:c2:3a:4d:69:ed:f1:42:89 + netdev_tstamp_prequeue ---------------------- diff --git a/Documentation/arm/sunxi.rst b/Documentation/arm/sunxi.rst index 62b533d0ba94..0c536ae1d7c2 100644 --- a/Documentation/arm/sunxi.rst +++ b/Documentation/arm/sunxi.rst @@ -148,3 +148,13 @@ SunXi family * User Manual http://dl.linux-sunxi.org/A64/Allwinner%20A64%20User%20Manual%20v1.0.pdf + + - Allwinner H6 + + * Datasheet + + https://linux-sunxi.org/images/5/5c/Allwinner_H6_V200_Datasheet_V1.1.pdf + + * User Manual + + https://linux-sunxi.org/images/4/46/Allwinner_H6_V200_User_Manual_V1.1.pdf diff --git a/Documentation/arm64/memory-tagging-extension.rst b/Documentation/arm64/memory-tagging-extension.rst index 034d37c605e8..b540178a93f8 100644 --- a/Documentation/arm64/memory-tagging-extension.rst +++ b/Documentation/arm64/memory-tagging-extension.rst @@ -102,7 +102,9 @@ applications. system call) are not checked if the user thread tag checking mode is ``PR_MTE_TCF_NONE`` or ``PR_MTE_TCF_ASYNC``. If the tag checking mode is ``PR_MTE_TCF_SYNC``, the kernel makes a best effort to check its user -address accesses, however it cannot always guarantee it. +address accesses, however it cannot always guarantee it. Kernel accesses +to user addresses are always performed with an effective ``PSTATE.TCO`` +value of zero, regardless of the user configuration. Excluding Tags in the ``IRG``, ``ADDG`` and ``SUBG`` instructions ----------------------------------------------------------------- diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst index d3587805de64..719510247292 100644 --- a/Documentation/arm64/silicon-errata.rst +++ b/Documentation/arm64/silicon-errata.rst @@ -90,6 +90,8 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A76 | #1463225 | ARM64_ERRATUM_1463225 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A77 | #1508412 | ARM64_ERRATUM_1508412 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Neoverse-N1 | #1188873,1418040| ARM64_ERRATUM_1418040 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Neoverse-N1 | #1349291 | N/A | diff --git a/Documentation/conf.py b/Documentation/conf.py index 376dd0ddf39c..ed2b43ec7754 100644 --- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -38,7 +38,8 @@ needs_sphinx = '1.3' # ones. extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include', 'kfigure', 'sphinx.ext.ifconfig', 'automarkup', - 'maintainers_include', 'sphinx.ext.autosectionlabel' ] + 'maintainers_include', 'sphinx.ext.autosectionlabel', + 'kernel_abi'] # # cdomain is badly broken in Sphinx 3+. Leaving it out generates *most* @@ -50,7 +51,7 @@ if major >= 3: support for Sphinx v3.0 and above is brand new. Be prepared for possible issues in the generated output. ''') - if minor > 0 or patch >= 2: + if (major > 3) or (minor > 0 or patch >= 2): # Sphinx c function parser is more pedantic with regards to type # checking. Due to that, having macros at c:function cause problems. # Those needed to be scaped by using c_id_attributes[] array diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst index c09c9ca2ff1c..2b68addaadcd 100644 --- a/Documentation/dev-tools/kasan.rst +++ b/Documentation/dev-tools/kasan.rst @@ -295,11 +295,13 @@ print the number of the test and the status of the test: pass:: ok 28 - kmalloc_double_kzfree + or, if kmalloc failed:: # kmalloc_large_oob_right: ASSERTION FAILED at lib/test_kasan.c:163 Expected ptr is not null, but is not ok 4 - kmalloc_large_oob_right + or, if a KASAN report was expected, but not found:: # kmalloc_double_kzfree: EXPECTATION FAILED at lib/test_kasan.c:629 diff --git a/Documentation/dev-tools/kunit/start.rst b/Documentation/dev-tools/kunit/start.rst index d23385e3e159..454f307813ea 100644 --- a/Documentation/dev-tools/kunit/start.rst +++ b/Documentation/dev-tools/kunit/start.rst @@ -197,7 +197,7 @@ Now add the following to ``drivers/misc/Kconfig``: config MISC_EXAMPLE_TEST bool "Test for my example" - depends on MISC_EXAMPLE && KUNIT + depends on MISC_EXAMPLE && KUNIT=y and the following to ``drivers/misc/Makefile``: diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index 961d3ea3ca19..62142a47488c 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -561,6 +561,11 @@ Once the kernel is built and installed, a simple ...will run the tests. +.. note:: + Note that you should make sure your test depends on ``KUNIT=y`` in Kconfig + if the test does not support module build. Otherwise, it will trigger + compile errors if ``CONFIG_KUNIT`` is ``m``. + Writing new tests for other architectures ----------------------------------------- diff --git a/Documentation/devicetree/bindings/arm/actions.yaml b/Documentation/devicetree/bindings/arm/actions.yaml index fe22c66e9c15..02dc72c97645 100644 --- a/Documentation/devicetree/bindings/arm/actions.yaml +++ b/Documentation/devicetree/bindings/arm/actions.yaml @@ -49,3 +49,5 @@ properties: - enum: - ucrobotics,bubblegum-96 # uCRobotics Bubblegum-96 - const: actions,s900 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml index 0bc5020b7539..c15c92fdf2ed 100644 --- a/Documentation/devicetree/bindings/arm/altera.yaml +++ b/Documentation/devicetree/bindings/arm/altera.yaml @@ -19,4 +19,7 @@ properties: - altr,socfpga-arria5 - altr,socfpga-arria10 - const: altr,socfpga + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/amazon,al.yaml b/Documentation/devicetree/bindings/arm/amazon,al.yaml index a3a4d710bd02..0f03135d91b6 100644 --- a/Documentation/devicetree/bindings/arm/amazon,al.yaml +++ b/Documentation/devicetree/bindings/arm/amazon,al.yaml @@ -30,4 +30,6 @@ properties: - amazon,al-alpine-v3-evp - const: amazon,al-alpine-v3 +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 0ee7c5b7b3f6..3341788d1096 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -173,4 +173,7 @@ properties: - enum: - amlogic,ad401 - const: amlogic,a1 + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/arm,integrator.yaml b/Documentation/devicetree/bindings/arm/arm,integrator.yaml index f0daf990e077..528eee64290a 100644 --- a/Documentation/devicetree/bindings/arm/arm,integrator.yaml +++ b/Documentation/devicetree/bindings/arm/arm,integrator.yaml @@ -83,4 +83,6 @@ required: - compatible - core-module@10000000 +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/arm,realview.yaml b/Documentation/devicetree/bindings/arm/arm,realview.yaml index 1d0b4e2bc7d2..4f9b21f49e84 100644 --- a/Documentation/devicetree/bindings/arm/arm,realview.yaml +++ b/Documentation/devicetree/bindings/arm/arm,realview.yaml @@ -120,4 +120,6 @@ required: - compatible - soc +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/arm,versatile.yaml b/Documentation/devicetree/bindings/arm/arm,versatile.yaml index 06efd2a075c9..34b437c72751 100644 --- a/Documentation/devicetree/bindings/arm/arm,versatile.yaml +++ b/Documentation/devicetree/bindings/arm/arm,versatile.yaml @@ -68,4 +68,6 @@ required: - compatible - core-module@10000000 +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml index 26829a803fda..55ef656d1192 100644 --- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml +++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml @@ -216,4 +216,6 @@ allOf: required: - arm,hbi +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml index 614c91956798..6fc5a22ad962 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml +++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml @@ -184,4 +184,6 @@ properties: - const: atmel,samv71 - const: atmel,samv7 +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/axxia.yaml b/Documentation/devicetree/bindings/arm/axxia.yaml index 3ea5f2fdcd96..e0d2bb71cf50 100644 --- a/Documentation/devicetree/bindings/arm/axxia.yaml +++ b/Documentation/devicetree/bindings/arm/axxia.yaml @@ -18,4 +18,6 @@ properties: - const: lsi,axm5516-amarillo - const: lsi,axm5516 +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml index dd52e29b0642..812ae8cc5959 100644 --- a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml @@ -51,4 +51,6 @@ properties: - raspberrypi,3-compute-module-lite - const: brcm,bcm2837 +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml index 497600a2ffb9..c60324357435 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml @@ -18,4 +18,6 @@ properties: - brcm,bcm28155-ap - const: brcm,bcm11351 +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml index e0ee931723dc..b3020757380f 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml @@ -18,4 +18,6 @@ properties: - brcm,bcm21664-garnet - const: brcm,bcm21664 +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml index 40d12ea56e54..37f3a6fcde76 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml @@ -18,4 +18,6 @@ properties: - brcm,bcm23550-sparrow - const: brcm,bcm23550 +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml index 988e0bbb2a62..434d3c6db61e 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml @@ -87,4 +87,7 @@ properties: - const: brcm,brcm53012 - const: brcm,brcm53016 - const: brcm,bcm4708 + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml index 9ba7b16e1fc4..432ccf990f9e 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml @@ -26,4 +26,6 @@ properties: - brcm,bcm58305 - const: brcm,cygnus +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml index ae614b6722c2..294948399f82 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml @@ -25,4 +25,6 @@ properties: - const: brcm,bcm53342 - const: brcm,hr2 +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml index 0749adf94c28..c4847abbecd8 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml @@ -20,4 +20,6 @@ properties: - brcm,ns2-xmc - const: brcm,ns2 +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml index 8c2cacb2bb4f..476bc23a7f75 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml @@ -33,4 +33,6 @@ properties: - brcm,bcm88312 - const: brcm,nsp +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml index c13cb96545a2..c638e04ebae0 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml @@ -21,4 +21,6 @@ properties: - brcm,bcm958802a802x - const: brcm,stingray +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml index ccdf9f99cb2b..4eba182abd53 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml @@ -19,4 +19,6 @@ properties: - cavium,thunderx2-cn9900 - const: brcm,vulcan-soc +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/bitmain.yaml b/Documentation/devicetree/bindings/arm/bitmain.yaml index 5880083ab8d0..90ba02be48ce 100644 --- a/Documentation/devicetree/bindings/arm/bitmain.yaml +++ b/Documentation/devicetree/bindings/arm/bitmain.yaml @@ -17,4 +17,7 @@ properties: - enum: - bitmain,sophon-edge - const: bitmain,bm1880 + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/calxeda.yaml b/Documentation/devicetree/bindings/arm/calxeda.yaml index aa5571d23c39..46f78addebb0 100644 --- a/Documentation/devicetree/bindings/arm/calxeda.yaml +++ b/Documentation/devicetree/bindings/arm/calxeda.yaml @@ -20,3 +20,5 @@ properties: - enum: - calxeda,highbank - calxeda,ecx-2000 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/digicolor.yaml b/Documentation/devicetree/bindings/arm/digicolor.yaml index 849e20518339..a35de3c9e284 100644 --- a/Documentation/devicetree/bindings/arm/digicolor.yaml +++ b/Documentation/devicetree/bindings/arm/digicolor.yaml @@ -15,4 +15,6 @@ properties: compatible: const: cnxt,cx92755 +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 1ca9dfa8ce9a..934289446abb 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -621,4 +621,6 @@ properties: - fsl,s32v234-evb # S32V234-EVB2 Customer Evaluation Board - const: fsl,s32v234 +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml index 43b8ce2227aa..b38458022946 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml @@ -64,4 +64,7 @@ properties: items: - const: H836ASDJ - const: hisilicon,sd5203 + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/intel,keembay.yaml b/Documentation/devicetree/bindings/arm/intel,keembay.yaml index 06a7b05f435f..69cd30872928 100644 --- a/Documentation/devicetree/bindings/arm/intel,keembay.yaml +++ b/Documentation/devicetree/bindings/arm/intel,keembay.yaml @@ -16,4 +16,7 @@ properties: - enum: - intel,keembay-evm - const: intel,keembay + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml index f18302efb90e..d72e92bdf7c1 100644 --- a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml +++ b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml @@ -22,3 +22,5 @@ properties: - enum: - gateworks,gw2358 - const: intel,ixp43x + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml index 7597bc93a55f..5cbcacaeb441 100644 --- a/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml +++ b/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml @@ -42,3 +42,5 @@ properties: - description: TI-SCI processor id for the remote processor device - description: TI-SCI host id to which processor control ownership should be transferred to + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml index a9828c50c0fb..e9bf3054529f 100644 --- a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml +++ b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml @@ -59,3 +59,5 @@ properties: - const: marvell,cn9130 - const: marvell,armada-ap807-quad - const: marvell,armada-ap807 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index 30908963ae26..f736e8c859fa 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -119,4 +119,7 @@ properties: - const: google,krane-sku176 - const: google,krane - const: mediatek,mt8183 + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml b/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml index ecf6fa12e6ad..6193388c6318 100644 --- a/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml +++ b/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml @@ -62,4 +62,6 @@ required: - compatible - axi@600000000 +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/moxart.yaml b/Documentation/devicetree/bindings/arm/moxart.yaml index c068df59fad2..670d24ce8ec5 100644 --- a/Documentation/devicetree/bindings/arm/moxart.yaml +++ b/Documentation/devicetree/bindings/arm/moxart.yaml @@ -16,4 +16,5 @@ properties: - const: moxa,moxart-uc-7112-lx - const: moxa,moxart +additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml index 3235ec9e9bad..d58116136154 100644 --- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml +++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml @@ -35,4 +35,7 @@ properties: - enum: - dell,wyse-ariel - const: marvell,mmp3 + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml index c2f980b00b06..7c787405bb2f 100644 --- a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml +++ b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml @@ -31,3 +31,5 @@ properties: - enum: - 70mai,midrived08 # 70mai midrive d08 - const: mstar,mercury5 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml index f7f024910e71..214c97bc3063 100644 --- a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml +++ b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml @@ -21,4 +21,6 @@ properties: - ea,ea3250 - phytec,phy3250 - const: nxp,lpc3250 + +additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index ad25deba4d86..c97d4a580f47 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -178,4 +178,6 @@ properties: - qcom,sm8250-mtp - const: qcom,sm8250 +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/rda.yaml b/Documentation/devicetree/bindings/arm/rda.yaml index 9672aa0c760d..a5c0444aa2b4 100644 --- a/Documentation/devicetree/bindings/arm/rda.yaml +++ b/Documentation/devicetree/bindings/arm/rda.yaml @@ -19,4 +19,6 @@ properties: - xunlong,orangepi-i96 # Orange Pi i96 - const: rda,8810pl +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/realtek.yaml b/Documentation/devicetree/bindings/arm/realtek.yaml index 845f9c76d6f7..9fb0297fe1ce 100644 --- a/Documentation/devicetree/bindings/arm/realtek.yaml +++ b/Documentation/devicetree/bindings/arm/realtek.yaml @@ -54,4 +54,7 @@ properties: - enum: - realtek,mjolnir # Realtek Mjolnir EVB - const: realtek,rtd1619 + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml index 01a6d0c571ad..ff94c45eefb0 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/arm/renesas.yaml @@ -299,4 +299,6 @@ properties: - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package) - const: renesas,r9a06g032 +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 65b4cc2c63f7..b621752aaa65 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -569,4 +569,7 @@ properties: items: - const: zkmagic,a95x-z2 - const: rockchip,rk3318 + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml index eb92f9eefaba..272508010b02 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml @@ -180,3 +180,5 @@ properties: required: - compatible + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/sirf.yaml b/Documentation/devicetree/bindings/arm/sirf.yaml index 0b597032c923..b25eb35d1b66 100644 --- a/Documentation/devicetree/bindings/arm/sirf.yaml +++ b/Documentation/devicetree/bindings/arm/sirf.yaml @@ -24,4 +24,7 @@ properties: - items: - const: sirf,prima2-cb - const: sirf,prima2 + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml b/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml index 2bd519d2e855..aa1d4afbc510 100644 --- a/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml +++ b/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml @@ -19,4 +19,7 @@ properties: - enum: - socionext,milbeaut-m10v-evb - const: socionext,sc2000a + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml index 6caf1f9be390..8c0e91658474 100644 --- a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml +++ b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml @@ -60,3 +60,5 @@ properties: - enum: - socionext,uniphier-pxs3-ref - const: socionext,uniphier-pxs3 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/spear.yaml b/Documentation/devicetree/bindings/arm/spear.yaml index f6ec731c9531..605ad3f882ef 100644 --- a/Documentation/devicetree/bindings/arm/spear.yaml +++ b/Documentation/devicetree/bindings/arm/spear.yaml @@ -22,4 +22,7 @@ properties: - st,spear320 - st,spear1310 - st,spear1340 + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml index 0258a96bfbde..7b6ae3070396 100644 --- a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml +++ b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml @@ -30,4 +30,6 @@ properties: - sprd,sp9863a-1h10 - const: sprd,sc9863a +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/sti.yaml b/Documentation/devicetree/bindings/arm/sti.yaml index 47f9b8eebaa0..b1f28d16d3fb 100644 --- a/Documentation/devicetree/bindings/arm/sti.yaml +++ b/Documentation/devicetree/bindings/arm/sti.yaml @@ -20,4 +20,7 @@ properties: - st,stih407 - st,stih410 - st,stih418 + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index deacb4e686e8..009b424e456e 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -54,8 +54,11 @@ properties: - const: st,stm32mp157 - description: Odyssey STM32MP1 SoM based Boards items: - - enum: - - seeed,stm32mp157c-odyssey - - const: seeed,stm32mp157c-odyssey-som - - const: st,stm32mp157 + - enum: + - seeed,stm32mp157c-odyssey + - const: seeed,stm32mp157c-odyssey-som + - const: st,stm32mp157 + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index afa00268c7db..cab8e1b6417b 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -893,3 +893,5 @@ properties: items: - const: xunlong,orangepi-zero-plus2-h3 - const: allwinner,sun8i-h3 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml index 8ae44948e873..767e86354c8e 100644 --- a/Documentation/devicetree/bindings/arm/tegra.yaml +++ b/Documentation/devicetree/bindings/arm/tegra.yaml @@ -125,3 +125,5 @@ properties: - enum: - nvidia,tegra234-vdk - const: nvidia,tegra234 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index 829751209543..c6e1c1e63e43 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -32,4 +32,7 @@ properties: - description: K3 J7200 SoC items: - const: ti,j7200 + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/ti/nspire.yaml b/Documentation/devicetree/bindings/arm/ti/nspire.yaml index e372b43da62f..cc2023bb7fa6 100644 --- a/Documentation/devicetree/bindings/arm/ti/nspire.yaml +++ b/Documentation/devicetree/bindings/arm/ti/nspire.yaml @@ -21,4 +21,7 @@ properties: - ti,nspire-tp # Clickpad models - ti,nspire-clp + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml index a8765ba29476..c022d325fc08 100644 --- a/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml +++ b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml @@ -23,4 +23,7 @@ properties: - enbw,cmc # EnBW AM1808 based CMC board - lego,ev3 # LEGO MINDSTORMS EV3 (AM1808 based) - const: ti,da850 + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/toshiba.yaml b/Documentation/devicetree/bindings/arm/toshiba.yaml index 0e066290238e..001bbbcd1432 100644 --- a/Documentation/devicetree/bindings/arm/toshiba.yaml +++ b/Documentation/devicetree/bindings/arm/toshiba.yaml @@ -19,4 +19,7 @@ properties: - enum: - toshiba,tmpv7708-rm-mbrc # TMPV7708 RM main board - const: toshiba,tmpv7708 + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/ux500.yaml b/Documentation/devicetree/bindings/arm/ux500.yaml index accaee906050..5db7cfba81a4 100644 --- a/Documentation/devicetree/bindings/arm/ux500.yaml +++ b/Documentation/devicetree/bindings/arm/ux500.yaml @@ -34,3 +34,5 @@ properties: items: - const: samsung,golden - const: st-ericsson,u8500 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/vt8500.yaml b/Documentation/devicetree/bindings/arm/vt8500.yaml index 7b25b6fa34e9..29ff399551ca 100644 --- a/Documentation/devicetree/bindings/arm/vt8500.yaml +++ b/Documentation/devicetree/bindings/arm/vt8500.yaml @@ -21,3 +21,6 @@ properties: - wm,wm8650 - wm,wm8750 - wm,wm8850 + +additionalProperties: true + diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml index c73b1f5c7f49..e0c6787f6e94 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.yaml +++ b/Documentation/devicetree/bindings/arm/xilinx.yaml @@ -111,4 +111,6 @@ properties: - const: xlnx,zynqmp-zcu111 - const: xlnx,zynqmp +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/zte.yaml b/Documentation/devicetree/bindings/arm/zte.yaml index 2d3fefdccdff..672f8129cd31 100644 --- a/Documentation/devicetree/bindings/arm/zte.yaml +++ b/Documentation/devicetree/bindings/arm/zte.yaml @@ -23,4 +23,6 @@ properties: - zte,zx296718-evb - const: zte,zx296718 +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/clock/hi6220-clock.txt b/Documentation/devicetree/bindings/clock/hi6220-clock.txt index ef3deb7b86ea..17ac4a3dd26a 100644 --- a/Documentation/devicetree/bindings/clock/hi6220-clock.txt +++ b/Documentation/devicetree/bindings/clock/hi6220-clock.txt @@ -4,7 +4,7 @@ Clock control registers reside in different Hi6220 system controllers, please refer the following document to know more about the binding rules for these system controllers: -Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml Required Properties: diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml index 31f085d8ab13..fd3113aa9ccd 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml @@ -7,17 +7,17 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Toshiba TC358775 DSI to LVDS bridge bindings maintainers: - - Vinay Simha BN <simhavcs@gmail.com> + - Vinay Simha BN <simhavcs@gmail.com> description: | - This binding supports DSI to LVDS bridge TC358775 + This binding supports DSI to LVDS bridge TC358775 - MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane. - Video frame size: - Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel - limited by 135 MHz LVDS speed - Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display - panel, limited by 270 MHz LVDS speed. + MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane. + Video frame size: + Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel + limited by 135 MHz LVDS speed + Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display + panel, limited by 270 MHz LVDS speed. properties: compatible: @@ -29,7 +29,7 @@ properties: vdd-supply: maxItems: 1 - description: 1.2V LVDS Power Supply + description: 1.2V LVDS Power Supply vddio-supply: maxItems: 1 @@ -77,16 +77,18 @@ properties: - port@1 required: - - compatible - - reg - - vdd-supply - - vddio-supply - - stby-gpios - - reset-gpios - - ports + - compatible + - reg + - vdd-supply + - vddio-supply + - stby-gpios + - reset-gpios + - ports + +additionalProperties: false examples: - - | + - | #include <dt-bindings/gpio/gpio.h> /* For single-link LVDS display panel */ @@ -147,7 +149,7 @@ examples: }; }; - - | + - | /* For dual-link LVDS display panel */ i2c@78b8000 { diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index c60b3bd74337..b2fcec4f22fd 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -13,9 +13,8 @@ properties: compatible: items: - enum: - - bananapi,lhr050h41 - - feixin,k101-im2byl02 - + - bananapi,lhr050h41 + - feixin,k101-im2byl02 - const: ilitek,ili9881c backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml index 937323cc9aaa..51f423297ec8 100644 --- a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml +++ b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml @@ -37,6 +37,9 @@ properties: reset-gpios: true + 'mantix,tp-rstn-gpios': + description: second reset line that triggers DSI config load + backlight: true required: @@ -63,6 +66,7 @@ examples: avee-supply = <®_avee>; vddi-supply = <®_1v8_p>; reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; backlight = <&backlight>; }; }; diff --git a/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml b/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml index a25387df0865..57e5270a0741 100644 --- a/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml +++ b/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml @@ -48,6 +48,7 @@ required: - "#address-cells" - "#size-cells" +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml index 9810619a2b5c..744973637678 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.yaml +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml @@ -81,14 +81,14 @@ properties: at25,byte-len: $ref: /schemas/types.yaml#/definitions/uint32 description: - Total eeprom size in bytes. Deprecated, use "size" property instead. + Total eeprom size in bytes. Deprecated, use "size" property instead. deprecated: true at25,addr-mode: $ref: /schemas/types.yaml#/definitions/uint32 description: - Addr-mode flags, as defined in include/linux/spi/eeprom.h. - Deprecated, use "address-width" property instead. + Addr-mode flags, as defined in include/linux/spi/eeprom.h. + Deprecated, use "address-width" property instead. deprecated: true at25,page-size: diff --git a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml index e2d2c10e536a..b032471831e7 100644 --- a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml @@ -43,8 +43,8 @@ properties: gpio-controller: true gpio-line-names: - minItems: 1 - maxItems: 8 + minItems: 1 + maxItems: 8 required: - compatible diff --git a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml new file mode 100644 index 000000000000..b386e4128a79 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/i2c/google,cros-ec-i2c-tunnel.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I2C bus that tunnels through the ChromeOS EC (cros-ec) + +maintainers: + - Doug Anderson <dianders@chromium.org> + - Benson Leung <bleung@chromium.org> + - Enric Balletbo i Serra <enric.balletbo@collabora.com> + +description: | + On some ChromeOS board designs we've got a connection to the EC + (embedded controller) but no direct connection to some devices on the + other side of the EC (like a battery and PMIC). To get access to + those devices we need to tunnel our i2c commands through the EC. + + The node for this device should be under a cros-ec node like + google,cros-ec-spi or google,cros-ec-i2c. + +allOf: + - $ref: i2c-controller.yaml# + +properties: + compatible: + const: google,cros-ec-i2c-tunnel + + google,remote-bus: + description: The EC bus we'd like to talk to. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - google,remote-bus + +unevaluatedProperties: false + +examples: + - | + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + cros-ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + spi-max-frequency = <5000000>; + + i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + #address-cells = <1>; + #size-cells = <0>; + + google,remote-bus = <0>; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,poll-retry-count = <1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt deleted file mode 100644 index 898f030eba62..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt +++ /dev/null @@ -1,39 +0,0 @@ -I2C bus that tunnels through the ChromeOS EC (cros-ec) -====================================================== -On some ChromeOS board designs we've got a connection to the EC (embedded -controller) but no direct connection to some devices on the other side of -the EC (like a battery and PMIC). To get access to those devices we need -to tunnel our i2c commands through the EC. - -The node for this device should be under a cros-ec node like google,cros-ec-spi -or google,cros-ec-i2c. - - -Required properties: -- compatible: google,cros-ec-i2c-tunnel -- google,remote-bus: The EC bus we'd like to talk to. - -Optional child nodes: -- One node per I2C device connected to the tunnelled I2C bus. - - -Example: - cros-ec@0 { - compatible = "google,cros-ec-spi"; - - ... - - i2c-tunnel { - compatible = "google,cros-ec-i2c-tunnel"; - #address-cells = <1>; - #size-cells = <0>; - - google,remote-bus = <0>; - - battery: sbs-battery@b { - compatible = "sbs,sbs-battery"; - reg = <0xb>; - sbs,poll-retry-count = <1>; - }; - }; - } diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml index 0e7b4b8a7e48..e1e65eb4f795 100644 --- a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml @@ -19,11 +19,11 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4770-i2c - - ingenic,x1000-i2c + - ingenic,jz4770-i2c + - ingenic,x1000-i2c - items: - - const: ingenic,jz4780-i2c - - const: ingenic,jz4770-i2c + - const: ingenic,jz4780-i2c + - const: ingenic,jz4770-i2c reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml index 6feafb7e531e..930f9e3904d7 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml @@ -43,4 +43,5 @@ examples: vref-supply = <&adc_vref>; }; }; -...
\ No newline at end of file +... + diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml index d3733ad8785a..8f32800fe5b7 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml @@ -46,7 +46,8 @@ properties: spi-max-frequency: true spi-cpol: true - spi-cpha : true + + spi-cpha: true "#io-channel-cells": const: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml index 5d92b477e23f..4e695b97d015 100644 --- a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml @@ -22,8 +22,8 @@ properties: adc-reserved-channels: $ref: /schemas/types.yaml#/definitions/uint32 description: - Bitmask of reserved channels, i.e. channels that cannot be - used by the OS. + Bitmask of reserved channels, i.e. channels that cannot be + used by the OS. clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml index 9514c3381c42..52490cbb0af0 100644 --- a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml +++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml @@ -21,7 +21,7 @@ properties: gpios: description: - GPIO used for controlling the reset pin + GPIO used for controlling the reset pin maxItems: 1 spi-max-frequency: true diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml index 6a176f551d75..c1772b568cd1 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml @@ -28,6 +28,8 @@ required: - reg - vref-supply +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml index dc870eb2875f..7037f82ec753 100644 --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml @@ -32,6 +32,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c0 { diff --git a/Documentation/devicetree/bindings/input/cros-ec-keyb.txt b/Documentation/devicetree/bindings/input/cros-ec-keyb.txt deleted file mode 100644 index 0f6355ce39b5..000000000000 --- a/Documentation/devicetree/bindings/input/cros-ec-keyb.txt +++ /dev/null @@ -1,72 +0,0 @@ -ChromeOS EC Keyboard - -Google's ChromeOS EC Keyboard is a simple matrix keyboard implemented on -a separate EC (Embedded Controller) device. It provides a message for reading -key scans from the EC. These are then converted into keycodes for processing -by the kernel. - -This binding is based on matrix-keymap.txt and extends/modifies it as follows: - -Required properties: -- compatible: "google,cros-ec-keyb" - -Optional properties: -- google,needs-ghost-filter: True to enable a ghost filter for the matrix -keyboard. This is recommended if the EC does not have its own logic or -hardware for this. - - -Example: - -cros-ec-keyb { - compatible = "google,cros-ec-keyb"; - keypad,num-rows = <8>; - keypad,num-columns = <13>; - google,needs-ghost-filter; - /* - * Keymap entries take the form of 0xRRCCKKKK where - * RR=Row CC=Column KKKK=Key Code - * The values below are for a US keyboard layout and - * are taken from the Linux driver. Note that the - * 102ND key is not used for US keyboards. - */ - linux,keymap = < - /* CAPSLCK F1 B F10 */ - 0x0001003a 0x0002003b 0x00030030 0x00040044 - /* N = R_ALT ESC */ - 0x00060031 0x0008000d 0x000a0064 0x01010001 - /* F4 G F7 H */ - 0x0102003e 0x01030022 0x01040041 0x01060023 - /* ' F9 BKSPACE L_CTRL */ - 0x01080028 0x01090043 0x010b000e 0x0200001d - /* TAB F3 T F6 */ - 0x0201000f 0x0202003d 0x02030014 0x02040040 - /* ] Y 102ND [ */ - 0x0205001b 0x02060015 0x02070056 0x0208001a - /* F8 GRAVE F2 5 */ - 0x02090042 0x03010029 0x0302003c 0x03030006 - /* F5 6 - \ */ - 0x0304003f 0x03060007 0x0308000c 0x030b002b - /* R_CTRL A D F */ - 0x04000061 0x0401001e 0x04020020 0x04030021 - /* S K J ; */ - 0x0404001f 0x04050025 0x04060024 0x04080027 - /* L ENTER Z C */ - 0x04090026 0x040b001c 0x0501002c 0x0502002e - /* V X , M */ - 0x0503002f 0x0504002d 0x05050033 0x05060032 - /* L_SHIFT / . SPACE */ - 0x0507002a 0x05080035 0x05090034 0x050B0039 - /* 1 3 4 2 */ - 0x06010002 0x06020004 0x06030005 0x06040003 - /* 8 7 0 9 */ - 0x06050009 0x06060008 0x0608000b 0x0609000a - /* L_ALT DOWN RIGHT Q */ - 0x060a0038 0x060b006c 0x060c006a 0x07010010 - /* E R W I */ - 0x07020012 0x07030013 0x07040011 0x07050017 - /* U R_SHIFT P O */ - 0x07060016 0x07070036 0x07080019 0x07090018 - /* UP LEFT */ - 0x070b0067 0x070c0069>; -}; diff --git a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml new file mode 100644 index 000000000000..8e50c14a9d77 --- /dev/null +++ b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/input/google,cros-ec-keyb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS EC Keyboard + +maintainers: + - Simon Glass <sjg@chromium.org> + - Benson Leung <bleung@chromium.org> + - Enric Balletbo i Serra <enric.balletbo@collabora.com> + +description: | + Google's ChromeOS EC Keyboard is a simple matrix keyboard + implemented on a separate EC (Embedded Controller) device. It provides + a message for reading key scans from the EC. These are then converted + into keycodes for processing by the kernel. + +allOf: + - $ref: "/schemas/input/matrix-keymap.yaml#" + +properties: + compatible: + const: google,cros-ec-keyb + + google,needs-ghost-filter: + description: + Enable a ghost filter for the matrix keyboard. This is recommended + if the EC does not have its own logic or hardware for this. + type: boolean + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + cros-ec-keyb { + compatible = "google,cros-ec-keyb"; + keypad,num-rows = <8>; + keypad,num-columns = <13>; + google,needs-ghost-filter; + /* + * Keymap entries take the form of 0xRRCCKKKK where + * RR=Row CC=Column KKKK=Key Code + * The values below are for a US keyboard layout and + * are taken from the Linux driver. Note that the + * 102ND key is not used for US keyboards. + */ + linux,keymap = < + /* CAPSLCK F1 B F10 */ + 0x0001003a 0x0002003b 0x00030030 0x00040044 + /* N = R_ALT ESC */ + 0x00060031 0x0008000d 0x000a0064 0x01010001 + /* F4 G F7 H */ + 0x0102003e 0x01030022 0x01040041 0x01060023 + /* ' F9 BKSPACE L_CTRL */ + 0x01080028 0x01090043 0x010b000e 0x0200001d + /* TAB F3 T F6 */ + 0x0201000f 0x0202003d 0x02030014 0x02040040 + /* ] Y 102ND [ */ + 0x0205001b 0x02060015 0x02070056 0x0208001a + /* F8 GRAVE F2 5 */ + 0x02090042 0x03010029 0x0302003c 0x03030006 + /* F5 6 - \ */ + 0x0304003f 0x03060007 0x0308000c 0x030b002b + /* R_CTRL A D F */ + 0x04000061 0x0401001e 0x04020020 0x04030021 + /* S K J ; */ + 0x0404001f 0x04050025 0x04060024 0x04080027 + /* L ENTER Z C */ + 0x04090026 0x040b001c 0x0501002c 0x0502002e + /* V X , M */ + 0x0503002f 0x0504002d 0x05050033 0x05060032 + /* L_SHIFT / . SPACE */ + 0x0507002a 0x05080035 0x05090034 0x050B0039 + /* 1 3 4 2 */ + 0x06010002 0x06020004 0x06030005 0x06040003 + /* 8 7 0 9 */ + 0x06050009 0x06060008 0x0608000b 0x0609000a + /* L_ALT DOWN RIGHT Q */ + 0x060a0038 0x060b006c 0x060c006a 0x07010010 + /* E R W I */ + 0x07020012 0x07030013 0x07040011 0x07050017 + /* U R_SHIFT P O */ + 0x07060016 0x07070036 0x07080019 0x07090018 + /* UP LEFT */ + 0x070b0067 0x070c0069>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml index bbf79d125675..1c4c009dedd0 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml @@ -94,12 +94,12 @@ properties: instances. required: - - compatible - - reg - - interrupts - - interrupt-names - - interrupt-controller - - "#interrupt-cells" + - compatible + - reg + - interrupts + - interrupt-names + - interrupt-controller + - "#interrupt-cells" additionalProperties: false diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml index c7cd05656a3e..f6c3fcc4bdfd 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml @@ -79,6 +79,8 @@ required: - ti,sci-dev-id - ti,interrupt-ranges +unevaluatedProperties: false + examples: - | bus { diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml index cff6a956afb4..e12aee42b126 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml @@ -88,6 +88,8 @@ required: - ti,sci-dev-id - ti,interrupt-ranges +unevaluatedProperties: false + examples: - | main_gpio_intr: interrupt-controller0 { diff --git a/Documentation/devicetree/bindings/leds/backlight/common.yaml b/Documentation/devicetree/bindings/leds/backlight/common.yaml index 4e7e95e331a5..bc817f77d2b1 100644 --- a/Documentation/devicetree/bindings/leds/backlight/common.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/common.yaml @@ -32,3 +32,5 @@ properties: that a LED can be made so bright that it gets damaged or causes damage due to restrictions in a specific system, such as mounting conditions. $ref: /schemas/types.yaml#definitions/uint32 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index 08b6700ca61e..f1211e7045f1 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -43,7 +43,7 @@ properties: LED_COLOR_ID available, add a new one. $ref: /schemas/types.yaml#definitions/uint32 minimum: 0 - maximum: 8 + maximum: 9 function-enumerator: description: diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml index b1a53f054b89..37445c68cdef 100644 --- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml +++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml @@ -16,7 +16,7 @@ description: | modules. This is achieved by adding multi-led nodes layer to the monochrome LED bindings. The nodes and properties defined in this document are unique to the multicolor - LED class. Common LED nodes and properties are inherited from the common.txt + LED class. Common LED nodes and properties are inherited from the common.yaml within this documentation directory. patternProperties: @@ -25,10 +25,11 @@ patternProperties: description: Represents the LEDs that are to be grouped. properties: color: - const: 8 # LED_COLOR_ID_MULTI description: | - For multicolor LED support this property should be defined as - LED_COLOR_ID_MULTI which can be found in include/linux/leds/common.h. + For multicolor LED support this property should be defined as either + LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in + include/linux/leds/common.h. + enum: [ 8, 9 ] $ref: "common.yaml#" diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml index 947542a253ec..c192b5feadc7 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml +++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml @@ -46,6 +46,12 @@ properties: vled-supply: description: LED supply. + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + patternProperties: '^multi-led@[0-9a-f]$': type: object @@ -69,6 +75,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt index cf48cd806e00..7771ecaac586 100644 --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt @@ -47,7 +47,7 @@ Example: interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_GCE>; clock-names = "gce"; - #mbox-cells = <3>; + #mbox-cells = <2>; }; Example for a client device: diff --git a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml index 074243c40891..08af356f5d27 100644 --- a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml +++ b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml @@ -17,7 +17,7 @@ properties: compatible: items: - enum: - - dell,wyse-ariel-ec # Dell Wyse Ariel board (3020) + - dell,wyse-ariel-ec # Dell Wyse Ariel board (3020) - const: ene,kb3930 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml index f49c0d5d31ad..76bf16ee27ec 100644 --- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -59,6 +59,14 @@ properties: whether this nvram is present or not. type: boolean + mtk,rpmsg-name: + description: + Must be defined if the cros-ec is a rpmsg device for a Mediatek + ARM Cortex M4 Co-processor. Contains the name pf the rpmsg + device. Used to match the subnode to the rpmsg device announced by + the SCP. + $ref: "/schemas/types.yaml#/definitions/string" + spi-max-frequency: description: Maximum SPI frequency of the device in Hz. @@ -71,6 +79,54 @@ properties: wakeup-source: description: Button can wake-up the system. + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + typec: + $ref: "/schemas/chrome/google,cros-ec-typec.yaml#" + + ec-pwm: + $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#" + + keyboard-controller: + $ref: "/schemas/input/google,cros-ec-keyb.yaml#" + + codecs: + type: object + additionalProperties: false + + properties: + '#address-cells': + const: 2 + + '#size-cells': + const: 1 + + patternProperties: + "^ec-codec@[a-f0-9]+$": + type: object + $ref: "/schemas/sound/google,cros-ec-codec.yaml#" + + required: + - "#address-cells" + - "#size-cells" + +patternProperties: + "^i2c-tunnel[0-9]*$": + type: object + $ref: "/schemas/i2c/google,cros-ec-i2c-tunnel.yaml#" + + "^regulator@[0-9]+$": + type: object + $ref: "/schemas/regulator/google,cros-ec-regulator.yaml#" + + "^extcon[0-9]*$": + type: object + $ref: "/schemas/extcon/extcon-usbc-cros-ec.yaml#" + required: - compatible diff --git a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml index dc21b4630c25..ee00d414df10 100644 --- a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml +++ b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml @@ -52,4 +52,7 @@ properties: items: - const: yna,cu2000-neo - const: ingenic,x2000e + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/mips/loongson/devices.yaml b/Documentation/devicetree/bindings/mips/loongson/devices.yaml index d25e80aa8b2a..9fee6708e6f5 100644 --- a/Documentation/devicetree/bindings/mips/loongson/devices.yaml +++ b/Documentation/devicetree/bindings/mips/loongson/devices.yaml @@ -36,4 +36,7 @@ properties: - description: Virtual Loongson64 Quad Core + VirtIO items: - const: loongson,loongson64v-4core-virtio + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml index 58fe9d02a781..0753289fba84 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml @@ -32,11 +32,11 @@ allOf: clock-output-names: oneOf: - items: - - const: clk_out_sd0 - - const: clk_in_sd0 + - const: clk_out_sd0 + - const: clk_in_sd0 - items: - - const: clk_out_sd1 - - const: clk_in_sd1 + - const: clk_out_sd1 + - const: clk_in_sd1 properties: compatible: diff --git a/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml index 55883290543b..69ff065c9a39 100644 --- a/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml @@ -46,6 +46,8 @@ required: - clocks - clock-names +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml index ac79f3adf20b..1ae945434c53 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml @@ -3,7 +3,7 @@ %YAML 1.2 --- $id: "http://devicetree.org/schemas/mmc/sdhci-am654.yaml#" -$schema : "http://devicetree.org/meta-schemas/core.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" title: TI AM654 MMC Controller @@ -163,13 +163,12 @@ properties: ti,driver-strength-ohm: description: DLL drive strength in ohms $ref: "/schemas/types.yaml#/definitions/uint32" - oneOf: - - enum: - - 33 - - 40 - - 50 - - 66 - - 100 + enum: + - 33 + - 40 + - 50 + - 66 + - 100 ti,strobe-sel: description: strobe select delay for HS400 speed mode. @@ -187,6 +186,8 @@ required: - clock-names - ti,otap-del-sel-legacy +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/net/can/can-controller.yaml b/Documentation/devicetree/bindings/net/can/can-controller.yaml new file mode 100644 index 000000000000..9cf2ae097156 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/can-controller.yaml @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/can-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CAN Controller Generic Binding + +maintainers: + - Marc Kleine-Budde <mkl@pengutronix.de> + +properties: + $nodename: + pattern: "^can(@.*)?$" + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml new file mode 100644 index 000000000000..43df15ba8fa4 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: + Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC). + +maintainers: + - Marc Kleine-Budde <mkl@pengutronix.de> + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - fsl,imx8qm-flexcan + - fsl,imx8mp-flexcan + - fsl,imx6q-flexcan + - fsl,imx53-flexcan + - fsl,imx35-flexcan + - fsl,imx28-flexcan + - fsl,imx25-flexcan + - fsl,p1010-flexcan + - fsl,vf610-flexcan + - fsl,ls1021ar2-flexcan + - fsl,lx2160ar1-flexcan + - items: + - enum: + - fsl,imx7d-flexcan + - fsl,imx6ul-flexcan + - fsl,imx6sx-flexcan + - const: fsl,imx6q-flexcan + - items: + - enum: + - fsl,ls1028ar1-flexcan + - const: fsl,lx2160ar1-flexcan + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: ipg + - const: per + + clock-frequency: + description: | + The oscillator frequency driving the flexcan device, filled in by the + boot loader. This property should only be used the used operating system + doesn't support the clocks and clock-names property. + + xceiver-supply: + description: Regulator that powers the CAN transceiver. + + big-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: | + This means the registers of FlexCAN controller are big endian. This is + optional property.i.e. if this property is not present in device tree + node then controller is assumed to be little endian. If this property is + present then controller is assumed to be big endian. + + fsl,stop-mode: + description: | + Register bits of stop mode control. + + The format should be as follows: + <gpr req_gpr req_bit> + gpr is the phandle to general purpose register node. + req_gpr is the gpr register offset of CAN stop request. + req_bit is the bit offset of CAN stop request. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - description: The 'gpr' is the phandle to general purpose register node. + - description: The 'req_gpr' is the gpr register offset of CAN stop request. + maximum: 0xff + - description: The 'req_bit' is the bit offset of CAN stop request. + maximum: 0x1f + + fsl,clk-source: + description: | + Select the clock source to the CAN Protocol Engine (PE). It's SoC + implementation dependent. Refer to RM for detailed definition. If this + property is not set in device tree node then driver selects clock source 1 + by default. + 0: clock source 0 (oscillator clock) + 1: clock source 1 (peripheral clock) + $ref: /schemas/types.yaml#/definitions/uint32 + default: 1 + minimum: 0 + maximum: 1 + + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable CAN remote wakeup. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + can@1c000 { + compatible = "fsl,p1010-flexcan"; + reg = <0x1c000 0x1000>; + interrupts = <48 0x2>; + interrupt-parent = <&mpic>; + clock-frequency = <200000000>; + fsl,clk-source = <0>; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + + can@2090000 { + compatible = "fsl,imx6q-flexcan"; + reg = <0x02090000 0x4000>; + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 1>, <&clks 2>; + clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x34 28>; + }; diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt deleted file mode 100644 index e10b6eb955e1..000000000000 --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt +++ /dev/null @@ -1,57 +0,0 @@ -Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC). - -Required properties: - -- compatible : Should be "fsl,<processor>-flexcan" - - where <processor> is imx8qm, imx6q, imx28, imx53, imx35, imx25, p1010, - vf610, ls1021ar2, lx2160ar1, ls1028ar1. - - The ls1028ar1 must be followed by lx2160ar1, e.g. - - "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan" - - An implementation should also claim any of the following compatibles - that it is fully backwards compatible with: - - - fsl,p1010-flexcan - -- reg : Offset and length of the register set for this device -- interrupts : Interrupt tuple for this device - -Optional properties: - -- clock-frequency : The oscillator frequency driving the flexcan device - -- xceiver-supply: Regulator that powers the CAN transceiver - -- big-endian: This means the registers of FlexCAN controller are big endian. - This is optional property.i.e. if this property is not present in - device tree node then controller is assumed to be little endian. - if this property is present then controller is assumed to be big - endian. - -- fsl,stop-mode: register bits of stop mode control, the format is - <&gpr req_gpr req_bit>. - gpr is the phandle to general purpose register node. - req_gpr is the gpr register offset of CAN stop request. - req_bit is the bit offset of CAN stop request. - -- fsl,clk-source: Select the clock source to the CAN Protocol Engine (PE). - It's SoC Implementation dependent. Refer to RM for detailed - definition. If this property is not set in device tree node - then driver selects clock source 1 by default. - 0: clock source 0 (oscillator clock) - 1: clock source 1 (peripheral clock) - -- wakeup-source: enable CAN remote wakeup - -Example: - - can@1c000 { - compatible = "fsl,p1010-flexcan"; - reg = <0x1c000 0x1000>; - interrupts = <48 0x2>; - interrupt-parent = <&mpic>; - clock-frequency = <200000000>; // filled in by bootloader - fsl,clk-source = <0>; // select clock source 0 for PE - }; diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml index fa3ebba4e635..c1948ce00081 100644 --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml @@ -46,6 +46,8 @@ required: - clocks - clock-names +unevaluatedProperties: false + examples: # FIXME: Remove defines and include the correct header file # once it is available in mainline. diff --git a/Documentation/devicetree/bindings/net/ti,dp83822.yaml b/Documentation/devicetree/bindings/net/ti,dp83822.yaml index 55913534cbc2..75e8712e903a 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83822.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83822.yaml @@ -65,6 +65,8 @@ properties: required: - reg +unevaluatedProperties: false + examples: - | mdio0 { diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml index f4292d2c54e3..d6cf8a560ef0 100644 --- a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml @@ -29,16 +29,16 @@ properties: reg-names: oneOf: - items: - - const: dbi - - const: dbi2 - - const: link - - const: addr_space + - const: dbi + - const: dbi2 + - const: link + - const: addr_space - items: - - const: dbi - - const: dbi2 - - const: link - - const: addr_space - - const: atu + - const: dbi + - const: dbi2 + - const: link + - const: addr_space + - const: atu clocks: maxItems: 2 diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml index bab2ff4d9dc9..34756347a14e 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml @@ -31,10 +31,10 @@ properties: clock-names: oneOf: - items: # for PXs2 - - const: link + - const: link - items: # for others - - const: link - - const: phy + - const: link + - const: phy resets: maxItems: 2 diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml index 15207ca9548f..83d5d0aceb04 100644 --- a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml +++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml @@ -7,23 +7,23 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: OMAP USB2 PHY maintainers: - - Kishon Vijay Abraham I <kishon@ti.com> - - Roger Quadros <rogerq@ti.com> + - Kishon Vijay Abraham I <kishon@ti.com> + - Roger Quadros <rogerq@ti.com> properties: compatible: oneOf: - items: - - enum: - - ti,dra7x-usb2 - - ti,dra7x-usb2-phy2 - - ti,am654-usb2 - - enum: - - ti,omap-usb2 + - enum: + - ti,dra7x-usb2 + - ti,dra7x-usb2-phy2 + - ti,am654-usb2 + - enum: + - ti,omap-usb2 - items: - - const: ti,am437x-usb2 + - const: ti,am437x-usb2 - items: - - const: ti,omap-usb2 + - const: ti,omap-usb2 reg: maxItems: 1 @@ -62,6 +62,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | usb0_phy: phy@4100000 { diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml index 33391d30c00c..ccdd9e3820d7 100644 --- a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml @@ -76,22 +76,22 @@ patternProperties: items: oneOf: - enum: [lcd0_d18_mfp, rmii_crs_dv_mfp, rmii_txd0_mfp, - rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp, - rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp, - i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp, - ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp, - ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp, - dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp, - dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp, - spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp, - dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp, - uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp, - sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp, - uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, - uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, - pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp, - dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp, - nand_ceb3_mfp] + rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp, + rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp, + i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp, + ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp, + ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp, + dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp, + dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp, + spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp, + dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp, + uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp, + sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp, + uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, + uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, + pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp, + dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp, + nand_ceb3_mfp] minItems: 1 maxItems: 32 @@ -100,10 +100,10 @@ patternProperties: Specify the alternative function to be configured for the given gpio pin groups. enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0, - sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, - i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, - p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m, - mipi_csi, nand, spdif, ts, lcd0] + sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, + i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, + p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m, + mipi_csi, nand, spdif, ts, lcd0] required: - groups @@ -126,14 +126,14 @@ patternProperties: items: oneOf: - enum: [sirq_drv, rmii_txd01_txen_drv, rmii_rxer_drv, - rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv, - smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, - i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, - lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv, - sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv, - spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv, - i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv, - sens0_ckout_drv, uart3_all_drv] + rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv, + smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, + i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, + lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv, + sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv, + spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv, + i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv, + sens0_ckout_drv, uart3_all_drv] minItems: 1 maxItems: 32 @@ -144,29 +144,29 @@ patternProperties: items: oneOf: - enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1, eth_txen, - eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk, - eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, - i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, - i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1, - ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp, - lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep, - lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp, - lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3, - dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0, - dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, - sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk, - spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx, - uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk, - sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1, - dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb, - uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb, - pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk, - i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0, - csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3, - csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3, - dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb, - dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1, - pkg2, pkg3] + eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk, + eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, + i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, + i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1, + ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp, + lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep, + lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp, + lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3, + dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0, + dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, + sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk, + spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx, + uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk, + sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1, + dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb, + uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb, + pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk, + i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0, + csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3, + csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3, + dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb, + dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1, + pkg2, pkg3] minItems: 1 maxItems: 64 diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml index 5556def6b99b..c4c071211611 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml @@ -106,7 +106,7 @@ patternProperties: required: - pinmux - additionalProperties: false + additionalProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml index 1f0f5757f9e1..040d2ada3669 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml @@ -71,9 +71,9 @@ patternProperties: Specify the alternative function to be configured for the specified pins. Functions are only valid for gpio pins. enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5, - blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1, - blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2, - blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ] + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1, + blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2, + blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ] drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml index d0d1a01140ea..9f1dab0c2430 100644 --- a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml @@ -40,24 +40,24 @@ patternProperties: Function to mux. $ref: "/schemas/types.yaml#/definitions/string" enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8, - spi0, spi1, spi2, spi3, spi4, spi5, spi6, - uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in] + spi0, spi1, spi2, spi3, spi4, spi5, spi6, + uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in] groups: description: Name of the pin group to use for the functions. $ref: "/schemas/types.yaml#/definitions/string" enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, - i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp, - spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp, - spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp, - uart0_grp, uart1_grp, uart2_grp, uart3_grp, - pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp, - pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp, - pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp, - pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp, - pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp, - pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp] + i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp, + spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp, + spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp, + uart0_grp, uart1_grp, uart2_grp, uart3_grp, + pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp, + pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp, + pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp, + pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp, + pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp, + pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp] drive-strength: enum: [2, 4, 6, 8, 16, 24, 32] diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml index a6c91026d4cc..9c6fda6b1dd9 100644 --- a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml +++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml @@ -28,14 +28,16 @@ description: | properties: mode-normal: - $ref: /schemas/types.yaml#/definitions/uint32 - description: | - Default value to set on a reboot if no command was provided. + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Default value to set on a reboot if no command was provided. patternProperties: "^mode-.*$": $ref: /schemas/types.yaml#/definitions/uint32 +additionalProperties: false + examples: - | reboot-mode { diff --git a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml index 867e3e6b7e80..76c227a7cd5c 100644 --- a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml @@ -15,10 +15,10 @@ properties: oneOf: - const: ingenic,jz4740-battery - items: - - enum: - - ingenic,jz4725b-battery - - ingenic,jz4770-battery - - const: ingenic,jz4740-battery + - enum: + - ingenic,jz4725b-battery + - ingenic,jz4770-battery + - const: ingenic,jz4740-battery io-channels: maxItems: 1 diff --git a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml index 193a23af2007..983fc215c1e5 100644 --- a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml @@ -84,12 +84,12 @@ allOf: then: properties: summit,mains-current-limit-microamp: - enum: [ 300000, 500000, 700000, 1000000, - 1500000, 1800000, 2000000] + enum: [ 300000, 500000, 700000, 1000000, + 1500000, 1800000, 2000000] summit,usb-current-limit-microamp: - enum: [ 300000, 500000, 700000, 1000000, - 1500000, 1800000, 2000000] + enum: [ 300000, 500000, 700000, 1000000, + 1500000, 1800000, 2000000] summit,charge-current-compensation-microamp: enum: [200000, 450000, 600000, 900000] @@ -97,12 +97,12 @@ allOf: else: properties: summit,mains-current-limit-microamp: - enum: [ 300000, 500000, 700000, 900000, 1200000, - 1500000, 1800000, 2000000, 2200000, 2500000] + enum: [ 300000, 500000, 700000, 900000, 1200000, + 1500000, 1800000, 2000000, 2200000, 2500000] summit,usb-current-limit-microamp: - enum: [ 300000, 500000, 700000, 900000, 1200000, - 1500000, 1800000, 2000000, 2200000, 2500000] + enum: [ 300000, 500000, 700000, 900000, 1200000, + 1500000, 1800000, 2000000, 2200000, 2500000] summit,charge-current-compensation-microamp: enum: [250000, 700000, 900000, 1200000] diff --git a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml index ba175b30f468..9245b7199439 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml @@ -41,6 +41,8 @@ required: - enable-gpios - mps,fb-voltage-divider +unevaluatedProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml index c6de49685db7..f578e72778a7 100644 --- a/Documentation/devicetree/bindings/regulator/pfuze100.yaml +++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml @@ -80,6 +80,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml index 3f4a1939554d..efc0198eeb74 100644 --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml +++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml @@ -25,8 +25,8 @@ select: properties: compatible: items: - - enum: - - sifive,fu540-c000-ccache + - enum: + - sifive,fu540-c000-ccache required: - compatible diff --git a/Documentation/devicetree/bindings/riscv/sifive.yaml b/Documentation/devicetree/bindings/riscv/sifive.yaml index 3ab532713dc1..3a8647d1da4c 100644 --- a/Documentation/devicetree/bindings/riscv/sifive.yaml +++ b/Documentation/devicetree/bindings/riscv/sifive.yaml @@ -22,4 +22,7 @@ properties: - sifive,hifive-unleashed-a00 - const: sifive,fu540-c000 - const: sifive,fu540 + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/rng/imx-rng.yaml b/Documentation/devicetree/bindings/rng/imx-rng.yaml index 4ad1e456a801..07f6ff89bcc1 100644 --- a/Documentation/devicetree/bindings/rng/imx-rng.yaml +++ b/Documentation/devicetree/bindings/rng/imx-rng.yaml @@ -19,9 +19,9 @@ properties: - const: fsl,imx21-rnga - items: - enum: - - fsl,imx6sl-rngb - - fsl,imx6sll-rngb - - fsl,imx6ull-rngb + - fsl,imx6sl-rngb + - fsl,imx6sll-rngb + - fsl,imx6ull-rngb - const: fsl,imx25-rngb - const: fsl,imx35-rngc diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml index 9ff85bc6859c..9702c07a6b6c 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml @@ -20,30 +20,30 @@ properties: - const: fsl,imx21-uart - items: - enum: - - fsl,imx25-uart - - fsl,imx27-uart - - fsl,imx31-uart - - fsl,imx35-uart - - fsl,imx50-uart - - fsl,imx51-uart - - fsl,imx53-uart - - fsl,imx6q-uart + - fsl,imx25-uart + - fsl,imx27-uart + - fsl,imx31-uart + - fsl,imx35-uart + - fsl,imx50-uart + - fsl,imx51-uart + - fsl,imx53-uart + - fsl,imx6q-uart - const: fsl,imx21-uart - items: - enum: - - fsl,imx6sl-uart - - fsl,imx6sll-uart - - fsl,imx6sx-uart + - fsl,imx6sl-uart + - fsl,imx6sll-uart + - fsl,imx6sx-uart - const: fsl,imx6q-uart - const: fsl,imx21-uart - items: - enum: - - fsl,imx6ul-uart - - fsl,imx7d-uart - - fsl,imx8mm-uart - - fsl,imx8mn-uart - - fsl,imx8mp-uart - - fsl,imx8mq-uart + - fsl,imx6ul-uart + - fsl,imx7d-uart + - fsl,imx8mm-uart + - fsl,imx8mn-uart + - fsl,imx8mp-uart + - fsl,imx8mq-uart - const: fsl,imx6q-uart reg: diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml index 3b9143af2c7c..acfb9db021dc 100644 --- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml +++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml @@ -11,9 +11,10 @@ maintainers: description: | Google's ChromeOS EC codec is a digital mic codec provided by the - Embedded Controller (EC) and is controlled via a host-command interface. - An EC codec node should only be found as a sub-node of the EC node (see - Documentation/devicetree/bindings/mfd/google,cros-ec.yaml). + Embedded Controller (EC) and is controlled via a host-command + interface. An EC codec node should only be found inside the "codecs" + subnode of a cros-ec node. + (see Documentation/devicetree/bindings/mfd/google,cros-ec.yaml). properties: compatible: @@ -54,14 +55,19 @@ examples: #size-cells = <0>; cros-ec@0 { compatible = "google,cros-ec-spi"; - #address-cells = <2>; - #size-cells = <1>; reg = <0>; - cros_ec_codec: ec-codec@10500000 { - compatible = "google,cros-ec-codec"; - #sound-dai-cells = <1>; - reg = <0x0 0x10500000 0x80000>; - memory-region = <&reserved_mem>; + + codecs { + #address-cells = <2>; + #size-cells = <1>; + + cros_ec_codec: ec-codec@10500000 { + compatible = "google,cros-ec-codec"; + #sound-dai-cells = <1>; + reg = <0x0 0x10500000 0x80000>; + memory-region = <&reserved_mem>; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml index 7d8bd4e14434..4a2129005c0f 100644 --- a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml +++ b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml @@ -10,8 +10,8 @@ maintainers: - Codrin Ciubotariu <codrin.ciubotariu@microchip.com> description: - The Microchip Sony/Philips Digital Interface Receiver is a - serial port compliant with the IEC-60958 standard. + The Microchip Sony/Philips Digital Interface Receiver is a serial port + compliant with the IEC-60958 standard. properties: "#sound-dai-cells": diff --git a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml index a03b0b871fc9..bdfb63387c53 100644 --- a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml +++ b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml @@ -10,8 +10,8 @@ maintainers: - Codrin Ciubotariu <codrin.ciubotariu@microchip.com> description: - The Microchip Sony/Philips Digital Interface Transmitter is a - serial port compliant with the IEC-60958 standard. + The Microchip Sony/Philips Digital Interface Transmitter is a serial port + compliant with the IEC-60958 standard. properties: "#sound-dai-cells": diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml index f6f9fb49f385..1e23c0e20bc1 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -26,8 +26,10 @@ properties: reg: maxItems: 2 description: LPAIF core registers + reg-names: - maxItems: 2 + maxItems: 2 + clocks: minItems: 3 maxItems: 6 @@ -39,8 +41,10 @@ properties: interrupts: maxItems: 2 description: LPAIF DMA buffer interrupt + interrupt-names: maxItems: 2 + qcom,adsp: $ref: /schemas/types.yaml#/definitions/phandle description: Phandle for the audio DSP node @@ -141,31 +145,31 @@ allOf: properties: clock-names: oneOf: - - items: #for I2S - - const: pcnoc-sway-clk - - const: audio-core - - const: mclk0 - - const: pcnoc-mport-clk - - const: mi2s-bit-clk0 - - const: mi2s-bit-clk1 - - items: #for HDMI - - const: pcnoc-sway-clk - - const: audio-core - - const: pcnoc-mport-clk + - items: #for I2S + - const: pcnoc-sway-clk + - const: audio-core + - const: mclk0 + - const: pcnoc-mport-clk + - const: mi2s-bit-clk0 + - const: mi2s-bit-clk1 + - items: #for HDMI + - const: pcnoc-sway-clk + - const: audio-core + - const: pcnoc-mport-clk reg-names: anyOf: - items: #for I2S - - const: lpass-lpaif + - const: lpass-lpaif - items: #for I2S and HDMI - - const: lpass-hdmiif - - const: lpass-lpaif + - const: lpass-hdmiif + - const: lpass-lpaif interrupt-names: anyOf: - items: #for I2S - - const: lpass-irq-lpaif + - const: lpass-irq-lpaif - items: #for I2S and HDMI - - const: lpass-irq-lpaif - - const: lpass-irq-hdmi + - const: lpass-irq-lpaif + - const: lpass-irq-hdmi required: - iommus - power-domains diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml index def1db298eac..644b68edf3e1 100644 --- a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml +++ b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml @@ -26,6 +26,8 @@ properties: required: - compatible +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml index 6ebcbc153691..b66a07e21d1e 100644 --- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml +++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml @@ -34,6 +34,9 @@ properties: - const: allwinner,sun8i-a23-system-control - const: allwinner,sun8i-h3-system-control - items: + - const: allwinner,sun8i-v3s-system-control + - const: allwinner,sun8i-h3-system-control + - items: - const: allwinner,sun8i-r40-system-control - const: allwinner,sun4i-a10-system-control - const: allwinner,sun50i-a64-sram-controller diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.yaml b/Documentation/devicetree/bindings/timer/arm,sp804.yaml index e35d3053250a..960e2bd66a97 100644 --- a/Documentation/devicetree/bindings/timer/arm,sp804.yaml +++ b/Documentation/devicetree/bindings/timer/arm,sp804.yaml @@ -33,8 +33,8 @@ properties: compatible: items: - enum: - - arm,sp804 - - hisilicon,sp804 + - arm,sp804 + - hisilicon,sp804 - const: arm,primecell interrupts: @@ -58,11 +58,11 @@ properties: clock is used for all clock inputs. oneOf: - items: - - description: clock for timer 1 - - description: clock for timer 2 - - description: bus clock + - description: clock for timer 1 + - description: clock for timer 2 + - description: bus clock - items: - - description: unified clock for both timers and the bus + - description: unified clock for both timers and the bus clock-names: true # The original binding did not specify any clock names, and there is no diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml index ac20b98e9910..d6af2794d444 100644 --- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml +++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml @@ -44,8 +44,8 @@ properties: enum: [super-speed, high-speed, full-speed] phys: - minItems: 1 - maxItems: 2 + minItems: 1 + maxItems: 2 phy-names: minItems: 1 diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml index 5fe9e6211ba2..52ceb07294a3 100644 --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml @@ -17,7 +17,7 @@ description: |- properties: compatible: - const: ti,hd3ss3220 + const: ti,hd3ss3220 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml index 1aaf3e768c81..55adea827c34 100644 --- a/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml +++ b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml @@ -15,10 +15,10 @@ properties: - const: fsl,imx21-owire - items: - enum: - - fsl,imx27-owire - - fsl,imx50-owire - - fsl,imx51-owire - - fsl,imx53-owire + - fsl,imx27-owire + - fsl,imx50-owire + - fsl,imx51-owire + - fsl,imx53-owire - const: fsl,imx21-owire reg: diff --git a/Documentation/filesystems/api-summary.rst b/Documentation/filesystems/api-summary.rst index bbb0c1c0e5cf..a94f17d9b836 100644 --- a/Documentation/filesystems/api-summary.rst +++ b/Documentation/filesystems/api-summary.rst @@ -86,9 +86,6 @@ Other Functions .. kernel-doc:: fs/dax.c :export: -.. kernel-doc:: fs/direct-io.c - :export: - .. kernel-doc:: fs/libfs.c :export: diff --git a/Documentation/filesystems/debugfs.rst b/Documentation/filesystems/debugfs.rst index 728ab57a611a..0f2292e367e6 100644 --- a/Documentation/filesystems/debugfs.rst +++ b/Documentation/filesystems/debugfs.rst @@ -199,7 +199,7 @@ of its elements. Note: Once array is created its size can not be changed. There is a helper function to create device related seq_file:: - struct dentry *debugfs_create_devm_seqfile(struct device *dev, + void debugfs_create_devm_seqfile(struct device *dev, const char *name, struct dentry *parent, int (*read_fn)(struct seq_file *s, diff --git a/Documentation/gpu/amdgpu.rst b/Documentation/gpu/amdgpu.rst index 1f9ea8221f80..2062a6023678 100644 --- a/Documentation/gpu/amdgpu.rst +++ b/Documentation/gpu/amdgpu.rst @@ -83,10 +83,6 @@ AMDGPU XGMI Support =================== .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c - :doc: AMDGPU XGMI Support - -.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c - :internal: AMDGPU RAS Support ================== @@ -124,9 +120,6 @@ RAS VRAM Bad Pages sysfs Interface .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c :doc: AMDGPU RAS sysfs gpu_vram_bad_pages Interface -.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c - :internal: - Sample Code ----------- Sample code for testing error injection can be found here: diff --git a/Documentation/hwmon/adm1266.rst b/Documentation/hwmon/adm1266.rst index 9257f8a48650..2b877011cfdf 100644 --- a/Documentation/hwmon/adm1266.rst +++ b/Documentation/hwmon/adm1266.rst @@ -20,7 +20,7 @@ ADM1266 is a sequencer that features voltage readback from 17 channels via an integrated 12 bit SAR ADC, accessed using a PMBus interface. The driver is a client driver to the core PMBus driver. Please see -Documentation/hwmon/pmbus for details on PMBus client drivers. +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Sysfs entries diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index e6b91ab12978..b797db738225 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -132,6 +132,7 @@ Hardware Monitoring Kernel Drivers mcp3021 menf21bmc mlxreg-fan + mp2975 nct6683 nct6775 nct7802 diff --git a/Documentation/hwmon/mp2975.rst b/Documentation/hwmon/mp2975.rst index 5b0609c62f48..81d816b71490 100644 --- a/Documentation/hwmon/mp2975.rst +++ b/Documentation/hwmon/mp2975.rst @@ -20,6 +20,7 @@ This driver implements support for Monolithic Power Systems, Inc. (MPS) vendor dual-loop, digital, multi-phase controller MP2975. This device: + - Supports up to two power rail. - Provides 8 pulse-width modulations (PWMs), and can be configured up to 8-phase operation for rail 1 and up to 4-phase operation for rail @@ -32,10 +33,12 @@ This device: 10-mV DAC, IMVP9 mode with 5-mV DAC. Device supports: + - SVID interface. - AVSBus interface. Device complaint with: + - PMBus rev 1.3 interface. Device supports direct format for reading output current, output voltage, @@ -45,11 +48,14 @@ Device supports VID and direct formats for reading output voltage. The below VID modes are supported: VR12, VR13, IMVP9. The driver provides the next attributes for the current: + - for current in: input, maximum alarm; - for current out input, maximum alarm and highest values; - for phase current: input and label. -attributes. + attributes. + The driver exports the following attributes via the 'sysfs' files, where + - 'n' is number of telemetry pages (from 1 to 2); - 'k' is number of configured phases (from 1 to 8); - indexes 1, 1*n for "iin"; @@ -65,11 +71,14 @@ The driver exports the following attributes via the 'sysfs' files, where **curr[1-{2n+k}]_label** The driver provides the next attributes for the voltage: + - for voltage in: input, high critical threshold, high critical alarm, all only from page 0; - for voltage out: input, low and high critical thresholds, low and high critical alarms, from pages 0 and 1; + The driver exports the following attributes via the 'sysfs' files, where + - 'n' is number of telemetry pages (from 1 to 2); - indexes 1 for "iin"; - indexes n+1, n+2 for "vout"; @@ -87,9 +96,12 @@ The driver exports the following attributes via the 'sysfs' files, where **in[2-{n+1}1_lcrit_alarm** The driver provides the next attributes for the power: + - for power in alarm and input. - for power out: highest and input. + The driver exports the following attributes via the 'sysfs' files, where + - 'n' is number of telemetry pages (from 1 to 2); - indexes 1 for "pin"; - indexes n+1, n+2 for "pout"; diff --git a/Documentation/leds/index.rst b/Documentation/leds/index.rst index bc70c6aa7138..53e6090454af 100644 --- a/Documentation/leds/index.rst +++ b/Documentation/leds/index.rst @@ -17,6 +17,7 @@ LEDs uleds leds-blinkm + leds-el15203000 leds-lm3556 leds-lp3944 leds-lp5521 diff --git a/Documentation/leds/leds-el15203000.rst b/Documentation/leds/leds-el15203000.rst new file mode 100644 index 000000000000..12c23d79724d --- /dev/null +++ b/Documentation/leds/leds-el15203000.rst @@ -0,0 +1,140 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================== +Kernel driver for Crane EL15203000 +================================== + +/sys/class/leds/<led>/hw_pattern +-------------------------------- + +Specify a hardware pattern for the EL15203000 LED. + +The LEDs board supports only predefined patterns by firmware +for specific LEDs. + +Breathing mode for Screen frame light tube:: + + "0 4000 1 4000" + + ^ + | + Max-| --- + | / \ + | / \ + | / \ / + | / \ / + Min-|- --- + | + 0------4------8--> time (sec) + +Cascade mode for Pipe LED:: + + "1 800 2 800 4 800 8 800 16 800" + + ^ + | + 0 On -|----+ +----+ +--- + | | | | | + Off-| +-------------------+ +-------------------+ + | + 1 On -| +----+ +----+ + | | | | | + Off |----+ +-------------------+ +------------------ + | + 2 On -| +----+ +----+ + | | | | | + Off-|---------+ +-------------------+ +------------- + | + 3 On -| +----+ +----+ + | | | | | + Off-|--------------+ +-------------------+ +-------- + | + 4 On -| +----+ +----+ + | | | | | + Off-|-------------------+ +-------------------+ +--- + | + 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec) + +Inverted cascade mode for Pipe LED:: + + "30 800 29 800 27 800 23 800 15 800" + + ^ + | + 0 On -| +-------------------+ +-------------------+ + | | | | | + Off-|----+ +----+ +--- + | + 1 On -|----+ +-------------------+ +------------------ + | | | | | + Off | +----+ +----+ + | + 2 On -|---------+ +-------------------+ +------------- + | | | | | + Off-| +----+ +----+ + | + 3 On -|--------------+ +-------------------+ +-------- + | | | | | + Off-| +----+ +----+ + | + 4 On -|-------------------+ +-------------------+ +--- + | | | | | + Off-| +----+ +----+ + | + 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec) + +Bounce mode for Pipe LED:: + + "1 800 2 800 4 800 8 800 16 800 16 800 8 800 4 800 2 800 1 800" + + ^ + | + 0 On -|----+ +-------- + | | | + Off-| +---------------------------------------+ + | + 1 On -| +----+ +----+ + | | | | | + Off |----+ +-----------------------------+ +-------- + | + 2 On -| +----+ +----+ + | | | | | + Off-|---------+ +-------------------+ +------------- + | + 3 On -| +----+ +----+ + | | | | | + Off-|--------------+ +---------+ +------------------ + | + 4 On -| +---------+ + | | | + Off-|-------------------+ +----------------------- + | + 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec) + +Inverted bounce mode for Pipe LED:: + + "30 800 29 800 27 800 23 800 15 800 15 800 23 800 27 800 29 800 30 800" + + ^ + | + 0 On -| +---------------------------------------+ + | | | + Off-|----+ +-------- + | + 1 On -|----+ +-----------------------------+ +-------- + | | | | | + Off | +----+ +----+ + | + 2 On -|---------+ +-------------------+ +------------- + | | | | | + Off-| +----+ +----+ + | + 3 On -|--------------+ +---------+ +------------------ + | | | | | + Off-| +----+ +----+ + | + 4 On -|-------------------+ +----------------------- + | | | + Off-| +---------+ + | + 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec) diff --git a/Documentation/leds/leds-sc27xx.rst b/Documentation/leds/leds-sc27xx.rst new file mode 100644 index 000000000000..6bdf6ba3c9fd --- /dev/null +++ b/Documentation/leds/leds-sc27xx.rst @@ -0,0 +1,27 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================================== +Kernel driver for Spreadtrum SC27XX +=================================== + +/sys/class/leds/<led>/hw_pattern +-------------------------------- + +Specify a hardware pattern for the SC27XX LED. For the SC27XX +LED controller, it only supports 4 stages to make a single +hardware pattern, which is used to configure the rise time, +high time, fall time and low time for the breathing mode. + +For the breathing mode, the SC27XX LED only expects one brightness +for the high stage. To be compatible with the hardware pattern +format, we should set brightness as 0 for rise stage, fall +stage and low stage. + +- Min stage duration: 125 ms +- Max stage duration: 31875 ms + +Since the stage duration step is 125 ms, the duration should be +a multiplier of 125, like 125ms, 250ms, 375ms, 500ms ... 31875ms. + +Thus the format of the hardware pattern values should be: +"0 rise_duration brightness high_duration 0 fall_duration 0 low_duration". diff --git a/Documentation/locking/lockdep-design.rst b/Documentation/locking/lockdep-design.rst index cec03bd1294a..9f3cfca9f8a4 100644 --- a/Documentation/locking/lockdep-design.rst +++ b/Documentation/locking/lockdep-design.rst @@ -42,6 +42,7 @@ The validator tracks lock-class usage history and divides the usage into (4 usages * n STATEs + 1) categories: where the 4 usages can be: + - 'ever held in STATE context' - 'ever held as readlock in STATE context' - 'ever held with STATE enabled' @@ -49,10 +50,12 @@ where the 4 usages can be: where the n STATEs are coded in kernel/locking/lockdep_states.h and as of now they include: + - hardirq - softirq where the last 1 category is: + - 'ever used' [ == !unused ] When locking rules are violated, these usage bits are presented in the @@ -96,9 +99,9 @@ exact case is for the lock as of the reporting time. +--------------+-------------+--------------+ | | irq enabled | irq disabled | +--------------+-------------+--------------+ - | ever in irq | ? | - | + | ever in irq | '?' | '-' | +--------------+-------------+--------------+ - | never in irq | + | . | + | never in irq | '+' | '.' | +--------------+-------------+--------------+ The character '-' suggests irq is disabled because if otherwise the @@ -216,7 +219,7 @@ looks like this:: BD_MUTEX_PARTITION }; -mutex_lock_nested(&bdev->bd_contains->bd_mutex, BD_MUTEX_PARTITION); + mutex_lock_nested(&bdev->bd_contains->bd_mutex, BD_MUTEX_PARTITION); In this case the locking is done on a bdev object that is known to be a partition. @@ -334,7 +337,7 @@ Troubleshooting: ---------------- The validator tracks a maximum of MAX_LOCKDEP_KEYS number of lock classes. -Exceeding this number will trigger the following lockdep warning: +Exceeding this number will trigger the following lockdep warning:: (DEBUG_LOCKS_WARN_ON(id >= MAX_LOCKDEP_KEYS)) @@ -420,7 +423,8 @@ the critical section of another reader of the same lock instance. The difference between recursive readers and non-recursive readers is because: recursive readers get blocked only by a write lock *holder*, while non-recursive -readers could get blocked by a write lock *waiter*. Considering the follow example: +readers could get blocked by a write lock *waiter*. Considering the follow +example:: TASK A: TASK B: @@ -448,20 +452,22 @@ There are simply four block conditions: Block condition matrix, Y means the row blocks the column, and N means otherwise. - | E | r | R | +---+---+---+---+ - E | Y | Y | Y | + | | E | r | R | + +---+---+---+---+ + | E | Y | Y | Y | + +---+---+---+---+ + | r | Y | Y | N | +---+---+---+---+ - r | Y | Y | N | + | R | Y | Y | N | +---+---+---+---+ - R | Y | Y | N | (W: writers, r: non-recursive readers, R: recursive readers) acquired recursively. Unlike non-recursive read locks, recursive read locks only get blocked by current write lock *holders* other than write lock -*waiters*, for example: +*waiters*, for example:: TASK A: TASK B: @@ -491,7 +497,7 @@ Recursive locks don't block each other, while non-recursive locks do (this is even true for two non-recursive read locks). A non-recursive lock can block the corresponding recursive lock, and vice versa. -A deadlock case with recursive locks involved is as follow: +A deadlock case with recursive locks involved is as follow:: TASK A: TASK B: @@ -510,7 +516,7 @@ because there are 3 types for lockers, there are, in theory, 9 types of lock dependencies, but we can show that 4 types of lock dependencies are enough for deadlock detection. -For each lock dependency: +For each lock dependency:: L1 -> L2 @@ -525,20 +531,25 @@ same types). With the above combination for simplification, there are 4 types of dependency edges in the lockdep graph: -1) -(ER)->: exclusive writer to recursive reader dependency, "X -(ER)-> Y" means +1) -(ER)->: + exclusive writer to recursive reader dependency, "X -(ER)-> Y" means X -> Y and X is a writer and Y is a recursive reader. -2) -(EN)->: exclusive writer to non-recursive locker dependency, "X -(EN)-> Y" means +2) -(EN)->: + exclusive writer to non-recursive locker dependency, "X -(EN)-> Y" means X -> Y and X is a writer and Y is either a writer or non-recursive reader. -3) -(SR)->: shared reader to recursive reader dependency, "X -(SR)-> Y" means +3) -(SR)->: + shared reader to recursive reader dependency, "X -(SR)-> Y" means X -> Y and X is a reader (recursive or not) and Y is a recursive reader. -4) -(SN)->: shared reader to non-recursive locker dependency, "X -(SN)-> Y" means +4) -(SN)->: + shared reader to non-recursive locker dependency, "X -(SN)-> Y" means X -> Y and X is a reader (recursive or not) and Y is either a writer or non-recursive reader. -Note that given two locks, they may have multiple dependencies between them, for example: +Note that given two locks, they may have multiple dependencies between them, +for example:: TASK A: @@ -592,11 +603,11 @@ circles that won't cause deadlocks. Proof for sufficiency (Lemma 1): -Let's say we have a strong circle: +Let's say we have a strong circle:: L1 -> L2 ... -> Ln -> L1 -, which means we have dependencies: +, which means we have dependencies:: L1 -> L2 L2 -> L3 @@ -633,7 +644,7 @@ a lock held by P2, and P2 is waiting for a lock held by P3, ... and Pn is waitin for a lock held by P1. Let's name the lock Px is waiting as Lx, so since P1 is waiting for L1 and holding Ln, so we will have Ln -> L1 in the dependency graph. Similarly, we have L1 -> L2, L2 -> L3, ..., Ln-1 -> Ln in the dependency graph, which means we -have a circle: +have a circle:: Ln -> L1 -> L2 -> ... -> Ln diff --git a/Documentation/misc-devices/mic/index.rst b/Documentation/misc-devices/mic/index.rst deleted file mode 100644 index 3a8d06367ef1..000000000000 --- a/Documentation/misc-devices/mic/index.rst +++ /dev/null @@ -1,16 +0,0 @@ -============================================= -Intel Many Integrated Core (MIC) architecture -============================================= - -.. toctree:: - :maxdepth: 1 - - mic_overview - scif_overview - -.. only:: subproject and html - - Indices - ======= - - * :ref:`genindex` diff --git a/Documentation/misc-devices/mic/mic_overview.rst b/Documentation/misc-devices/mic/mic_overview.rst deleted file mode 100644 index 17d956bdaf7c..000000000000 --- a/Documentation/misc-devices/mic/mic_overview.rst +++ /dev/null @@ -1,85 +0,0 @@ -====================================================== -Intel Many Integrated Core (MIC) architecture overview -====================================================== - -An Intel MIC X100 device is a PCIe form factor add-in coprocessor -card based on the Intel Many Integrated Core (MIC) architecture -that runs a Linux OS. It is a PCIe endpoint in a platform and therefore -implements the three required standard address spaces i.e. configuration, -memory and I/O. The host OS loads a device driver as is typical for -PCIe devices. The card itself runs a bootstrap after reset that -transfers control to the card OS downloaded from the host driver. The -host driver supports OSPM suspend and resume operations. It shuts down -the card during suspend and reboots the card OS during resume. -The card OS as shipped by Intel is a Linux kernel with modifications -for the X100 devices. - -Since it is a PCIe card, it does not have the ability to host hardware -devices for networking, storage and console. We provide these devices -on X100 coprocessors thus enabling a self-bootable equivalent -environment for applications. A key benefit of our solution is that it -leverages the standard virtio framework for network, disk and console -devices, though in our case the virtio framework is used across a PCIe -bus. A Virtio Over PCIe (VOP) driver allows creating user space -backends or devices on the host which are used to probe virtio drivers -for these devices on the MIC card. The existing VRINGH infrastructure -in the kernel is used to access virtio rings from the host. The card -VOP driver allows card virtio drivers to communicate with their user -space backends on the host via a device page. Ring 3 apps on the host -can add, remove and configure virtio devices. A thin MIC specific -virtio_config_ops is implemented which is borrowed heavily from -previous similar implementations in lguest and s390. - -MIC PCIe card has a dma controller with 8 channels. These channels are -shared between the host s/w and the card s/w. 0 to 3 are used by host -and 4 to 7 by card. As the dma device doesn't show up as PCIe device, -a virtual bus called mic bus is created and virtual dma devices are -created on it by the host/card drivers. On host the channels are private -and used only by the host driver to transfer data for the virtio devices. - -The Symmetric Communication Interface (SCIF (pronounced as skiff)) is a -low level communications API across PCIe currently implemented for MIC. -More details are available at scif_overview.txt. - -The Coprocessor State Management (COSM) driver on the host allows for -boot, shutdown and reset of Intel MIC devices. It communicates with a COSM -"client" driver on the MIC cards over SCIF to perform these functions. - -Here is a block diagram of the various components described above. The -virtio backends are situated on the host rather than the card given better -single threaded performance for the host compared to MIC, the ability of -the host to initiate DMA's to/from the card using the MIC DMA engine and -the fact that the virtio block storage backend can only be on the host:: - - +----------+ | +----------+ - | Card OS | | | Host OS | - +----------+ | +----------+ - | - +-------+ +--------+ +------+ | +---------+ +--------+ +--------+ - | Virtio| |Virtio | |Virtio| | |Virtio | |Virtio | |Virtio | - | Net | |Console | |Block | | |Net | |Console | |Block | - | Driver| |Driver | |Driver| | |backend | |backend | |backend | - +---+---+ +---+----+ +--+---+ | +---------+ +----+---+ +--------+ - | | | | | | | - | | | |User | | | - | | | |------|------------|--+------|------- - +---------+---------+ |Kernel | - | | | - +---------+ +---+----+ +------+ | +------+ +------+ +--+---+ +-------+ - |MIC DMA | | VOP | | SCIF | | | SCIF | | COSM | | VOP | |MIC DMA| - +---+-----+ +---+----+ +--+---+ | +--+---+ +--+---+ +------+ +----+--+ - | | | | | | | - +---+-----+ +---+----+ +--+---+ | +--+---+ +--+---+ +------+ +----+--+ - |MIC | | VOP | |SCIF | | |SCIF | | COSM | | VOP | | MIC | - |HW Bus | | HW Bus| |HW Bus| | |HW Bus| | Bus | |HW Bus| |HW Bus | - +---------+ +--------+ +--+---+ | +--+---+ +------+ +------+ +-------+ - | | | | | | | - | +-----------+--+ | | | +---------------+ | - | |Intel MIC | | | | |Intel MIC | | - | |Card Driver | | | | |Host Driver | | - +---+--------------+------+ | +----+---------------+-----+ - | | | - +-------------------------------------------------------------+ - | | - | PCIe Bus | - +-------------------------------------------------------------+ diff --git a/Documentation/misc-devices/mic/scif_overview.rst b/Documentation/misc-devices/mic/scif_overview.rst deleted file mode 100644 index 4c8ad9e43706..000000000000 --- a/Documentation/misc-devices/mic/scif_overview.rst +++ /dev/null @@ -1,108 +0,0 @@ -======================================== -Symmetric Communication Interface (SCIF) -======================================== - -The Symmetric Communication Interface (SCIF (pronounced as skiff)) is a low -level communications API across PCIe currently implemented for MIC. Currently -SCIF provides inter-node communication within a single host platform, where a -node is a MIC Coprocessor or Xeon based host. SCIF abstracts the details of -communicating over the PCIe bus while providing an API that is symmetric -across all the nodes in the PCIe network. An important design objective for SCIF -is to deliver the maximum possible performance given the communication -abilities of the hardware. SCIF has been used to implement an offload compiler -runtime and OFED support for MPI implementations for MIC coprocessors. - -SCIF API Components -=================== - -The SCIF API has the following parts: - -1. Connection establishment using a client server model -2. Byte stream messaging intended for short messages -3. Node enumeration to determine online nodes -4. Poll semantics for detection of incoming connections and messages -5. Memory registration to pin down pages -6. Remote memory mapping for low latency CPU accesses via mmap -7. Remote DMA (RDMA) for high bandwidth DMA transfers -8. Fence APIs for RDMA synchronization - -SCIF exposes the notion of a connection which can be used by peer processes on -nodes in a SCIF PCIe "network" to share memory "windows" and to communicate. A -process in a SCIF node initiates a SCIF connection to a peer process on a -different node via a SCIF "endpoint". SCIF endpoints support messaging APIs -which are similar to connection oriented socket APIs. Connected SCIF endpoints -can also register local memory which is followed by data transfer using either -DMA, CPU copies or remote memory mapping via mmap. SCIF supports both user and -kernel mode clients which are functionally equivalent. - -SCIF Performance for MIC -======================== - -DMA bandwidth comparison between the TCP (over ethernet over PCIe) stack versus -SCIF shows the performance advantages of SCIF for HPC applications and -runtimes:: - - Comparison of TCP and SCIF based BW - - Throughput (GB/sec) - 8 + PCIe Bandwidth ****** - + TCP ###### - 7 + ************************************** SCIF %%%%%% - | %%%%%%%%%%%%%%%%%%% - 6 + %%%% - | %% - | %%% - 5 + %% - | %% - 4 + %% - | %% - 3 + %% - | % - 2 + %% - | %% - | % - 1 + - + ###################################### - 0 +++---+++--+--+-+--+--+-++-+--+-++-+--+-++-+- - 1 10 100 1000 10000 100000 - Transfer Size (KBytes) - -SCIF allows memory sharing via mmap(..) between processes on different PCIe -nodes and thus provides bare-metal PCIe latency. The round trip SCIF mmap -latency from the host to an x100 MIC for an 8 byte message is 0.44 usecs. - -SCIF has a user space library which is a thin IOCTL wrapper providing a user -space API similar to the kernel API in scif.h. The SCIF user space library -is distributed @ https://software.intel.com/en-us/mic-developer - -Here is some pseudo code for an example of how two applications on two PCIe -nodes would typically use the SCIF API:: - - Process A (on node A) Process B (on node B) - - /* get online node information */ - scif_get_node_ids(..) scif_get_node_ids(..) - scif_open(..) scif_open(..) - scif_bind(..) scif_bind(..) - scif_listen(..) - scif_accept(..) scif_connect(..) - /* SCIF connection established */ - - /* Send and receive short messages */ - scif_send(..)/scif_recv(..) scif_send(..)/scif_recv(..) - - /* Register memory */ - scif_register(..) scif_register(..) - - /* RDMA */ - scif_readfrom(..)/scif_writeto(..) scif_readfrom(..)/scif_writeto(..) - - /* Fence DMAs */ - scif_fence_signal(..) scif_fence_signal(..) - - mmap(..) mmap(..) - - /* Access remote registered memory */ - - /* Close the endpoints */ - scif_close(..) scif_close(..) diff --git a/Documentation/networking/devlink/ice.rst b/Documentation/networking/devlink/ice.rst index b165181d5d4d..a432dc419fa4 100644 --- a/Documentation/networking/devlink/ice.rst +++ b/Documentation/networking/devlink/ice.rst @@ -70,6 +70,7 @@ The ``ice`` driver reports the following versions that both the name (as reported by ``fw.app.name``) and version are required to uniquely identify the package. * - ``fw.app.bundle_id`` + - running - 0xc0000001 - Unique identifier for the DDP package loaded in the device. Also referred to as the DDP Track ID. Can be used to uniquely identify diff --git a/Documentation/networking/j1939.rst b/Documentation/networking/j1939.rst index f5be243d250a..0a4b73b03b99 100644 --- a/Documentation/networking/j1939.rst +++ b/Documentation/networking/j1939.rst @@ -10,9 +10,9 @@ Overview / What Is J1939 SAE J1939 defines a higher layer protocol on CAN. It implements a more sophisticated addressing scheme and extends the maximum packet size above 8 bytes. Several derived specifications exist, which differ from the original -J1939 on the application level, like MilCAN A, NMEA2000 and especially +J1939 on the application level, like MilCAN A, NMEA2000, and especially ISO-11783 (ISOBUS). This last one specifies the so-called ETP (Extended -Transport Protocol) which is has been included in this implementation. This +Transport Protocol), which has been included in this implementation. This results in a maximum packet size of ((2 ^ 24) - 1) * 7 bytes == 111 MiB. Specifications used @@ -32,15 +32,15 @@ sockets, we found some reasons to justify a kernel implementation for the addressing and transport methods used by J1939. * **Addressing:** when a process on an ECU communicates via J1939, it should - not necessarily know its source address. Although at least one process per + not necessarily know its source address. Although, at least one process per ECU should know the source address. Other processes should be able to reuse that address. This way, address parameters for different processes cooperating for the same ECU, are not duplicated. This way of working is - closely related to the UNIX concept where programs do just one thing, and do + closely related to the UNIX concept, where programs do just one thing and do it well. * **Dynamic addressing:** Address Claiming in J1939 is time critical. - Furthermore data transport should be handled properly during the address + Furthermore, data transport should be handled properly during the address negotiation. Putting this functionality in the kernel eliminates it as a requirement for _every_ user space process that communicates via J1939. This results in a consistent J1939 bus with proper addressing. @@ -58,7 +58,7 @@ Therefore, these parts are left to user space. The J1939 sockets operate on CAN network devices (see SocketCAN). Any J1939 user space library operating on CAN raw sockets will still operate properly. -Since such library does not communicate with the in-kernel implementation, care +Since such a library does not communicate with the in-kernel implementation, care must be taken that these two do not interfere. In practice, this means they cannot share ECU addresses. A single ECU (or virtual ECU) address is used by the library exclusively, or by the in-kernel system exclusively. @@ -77,13 +77,13 @@ is composed as follows: 8 bits : PS (PDU Specific) In J1939-21 distinction is made between PDU1 format (where PF < 240) and PDU2 -format (where PF >= 240). Furthermore, when using PDU2 format, the PS-field +format (where PF >= 240). Furthermore, when using the PDU2 format, the PS-field contains a so-called Group Extension, which is part of the PGN. When using PDU2 format, the Group Extension is set in the PS-field. On the other hand, when using PDU1 format, the PS-field contains a so-called Destination Address, which is _not_ part of the PGN. When communicating a PGN -from user space to kernel (or visa versa) and PDU2 format is used, the PS-field +from user space to kernel (or vice versa) and PDU2 format is used, the PS-field of the PGN shall be set to zero. The Destination Address shall be set elsewhere. @@ -96,15 +96,15 @@ Addressing Both static and dynamic addressing methods can be used. -For static addresses, no extra checks are made by the kernel, and provided +For static addresses, no extra checks are made by the kernel and provided addresses are considered right. This responsibility is for the OEM or system integrator. For dynamic addressing, so-called Address Claiming, extra support is foreseen -in the kernel. In J1939 any ECU is known by it's 64-bit NAME. At the moment of +in the kernel. In J1939 any ECU is known by its 64-bit NAME. At the moment of a successful address claim, the kernel keeps track of both NAME and source address being claimed. This serves as a base for filter schemes. By default, -packets with a destination that is not locally, will be rejected. +packets with a destination that is not locally will be rejected. Mixed mode packets (from a static to a dynamic address or vice versa) are allowed. The BSD sockets define separate API calls for getting/setting the @@ -131,31 +131,31 @@ API Calls --------- On CAN, you first need to open a socket for communicating over a CAN network. -To use J1939, #include <linux/can/j1939.h>. From there, <linux/can.h> will be +To use J1939, ``#include <linux/can/j1939.h>``. From there, ``<linux/can.h>`` will be included too. To open a socket, use: .. code-block:: C s = socket(PF_CAN, SOCK_DGRAM, CAN_J1939); -J1939 does use SOCK_DGRAM sockets. In the J1939 specification, connections are +J1939 does use ``SOCK_DGRAM`` sockets. In the J1939 specification, connections are mentioned in the context of transport protocol sessions. These still deliver -packets to the other end (using several CAN packets). SOCK_STREAM is not +packets to the other end (using several CAN packets). ``SOCK_STREAM`` is not supported. -After the successful creation of the socket, you would normally use the bind(2) -and/or connect(2) system call to bind the socket to a CAN interface. After -binding and/or connecting the socket, you can read(2) and write(2) from/to the -socket or use send(2), sendto(2), sendmsg(2) and the recv*() counterpart +After the successful creation of the socket, you would normally use the ``bind(2)`` +and/or ``connect(2)`` system call to bind the socket to a CAN interface. After +binding and/or connecting the socket, you can ``read(2)`` and ``write(2)`` from/to the +socket or use ``send(2)``, ``sendto(2)``, ``sendmsg(2)`` and the ``recv*()`` counterpart operations on the socket as usual. There are also J1939 specific socket options described below. -In order to send data, a bind(2) must have been successful. bind(2) assigns a +In order to send data, a ``bind(2)`` must have been successful. ``bind(2)`` assigns a local address to a socket. -Different from CAN is that the payload data is just the data that get send, -without it's header info. The header info is derived from the sockaddr supplied -to bind(2), connect(2), sendto(2) and recvfrom(2). A write(2) with size 4 will +Different from CAN is that the payload data is just the data that get sends, +without its header info. The header info is derived from the sockaddr supplied +to ``bind(2)``, ``connect(2)``, ``sendto(2)`` and ``recvfrom(2)``. A ``write(2)`` with size 4 will result in a packet with 4 bytes. The sockaddr structure has extensions for use with J1939 as specified below: @@ -180,47 +180,47 @@ The sockaddr structure has extensions for use with J1939 as specified below: } can_addr; } -can_family & can_ifindex serve the same purpose as for other SocketCAN sockets. +``can_family`` & ``can_ifindex`` serve the same purpose as for other SocketCAN sockets. -can_addr.j1939.pgn specifies the PGN (max 0x3ffff). Individual bits are +``can_addr.j1939.pgn`` specifies the PGN (max 0x3ffff). Individual bits are specified above. -can_addr.j1939.name contains the 64-bit J1939 NAME. +``can_addr.j1939.name`` contains the 64-bit J1939 NAME. -can_addr.j1939.addr contains the address. +``can_addr.j1939.addr`` contains the address. -The bind(2) system call assigns the local address, i.e. the source address when -sending packages. If a PGN during bind(2) is set, it's used as a RX filter. -I.e. only packets with a matching PGN are received. If an ADDR or NAME is set +The ``bind(2)`` system call assigns the local address, i.e. the source address when +sending packages. If a PGN during ``bind(2)`` is set, it's used as a RX filter. +I.e. only packets with a matching PGN are received. If an ADDR or NAME is set it is used as a receive filter, too. It will match the destination NAME or ADDR of the incoming packet. The NAME filter will work only if appropriate Address Claiming for this name was done on the CAN bus and registered/cached by the kernel. -On the other hand connect(2) assigns the remote address, i.e. the destination -address. The PGN from connect(2) is used as the default PGN when sending +On the other hand ``connect(2)`` assigns the remote address, i.e. the destination +address. The PGN from ``connect(2)`` is used as the default PGN when sending packets. If ADDR or NAME is set it will be used as the default destination ADDR -or NAME. Further a set ADDR or NAME during connect(2) is used as a receive +or NAME. Further a set ADDR or NAME during ``connect(2)`` is used as a receive filter. It will match the source NAME or ADDR of the incoming packet. -Both write(2) and send(2) will send a packet with local address from bind(2) and -the remote address from connect(2). Use sendto(2) to overwrite the destination +Both ``write(2)`` and ``send(2)`` will send a packet with local address from ``bind(2)`` and the +remote address from ``connect(2)``. Use ``sendto(2)`` to overwrite the destination address. -If can_addr.j1939.name is set (!= 0) the NAME is looked up by the kernel and -the corresponding ADDR is used. If can_addr.j1939.name is not set (== 0), -can_addr.j1939.addr is used. +If ``can_addr.j1939.name`` is set (!= 0) the NAME is looked up by the kernel and +the corresponding ADDR is used. If ``can_addr.j1939.name`` is not set (== 0), +``can_addr.j1939.addr`` is used. When creating a socket, reasonable defaults are set. Some options can be -modified with setsockopt(2) & getsockopt(2). +modified with ``setsockopt(2)`` & ``getsockopt(2)``. RX path related options: -- SO_J1939_FILTER - configure array of filters -- SO_J1939_PROMISC - disable filters set by bind(2) and connect(2) +- ``SO_J1939_FILTER`` - configure array of filters +- ``SO_J1939_PROMISC`` - disable filters set by ``bind(2)`` and ``connect(2)`` By default no broadcast packets can be send or received. To enable sending or -receiving broadcast packets use the socket option SO_BROADCAST: +receiving broadcast packets use the socket option ``SO_BROADCAST``: .. code-block:: C @@ -261,26 +261,26 @@ The following diagram illustrates the RX path: +---------------------------+ TX path related options: -SO_J1939_SEND_PRIO - change default send priority for the socket +``SO_J1939_SEND_PRIO`` - change default send priority for the socket Message Flags during send() and Related System Calls ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -send(2), sendto(2) and sendmsg(2) take a 'flags' argument. Currently +``send(2)``, ``sendto(2)`` and ``sendmsg(2)`` take a 'flags' argument. Currently supported flags are: -* MSG_DONTWAIT, i.e. non-blocking operation. +* ``MSG_DONTWAIT``, i.e. non-blocking operation. recvmsg(2) ^^^^^^^^^^ -In most cases recvmsg(2) is needed if you want to extract more information than -recvfrom(2) can provide. For example package priority and timestamp. The +In most cases ``recvmsg(2)`` is needed if you want to extract more information than +``recvfrom(2)`` can provide. For example package priority and timestamp. The Destination Address, name and packet priority (if applicable) are attached to -the msghdr in the recvmsg(2) call. They can be extracted using cmsg(3) macros, -with cmsg_level == SOL_J1939 && cmsg_type == SCM_J1939_DEST_ADDR, -SCM_J1939_DEST_NAME or SCM_J1939_PRIO. The returned data is a uint8_t for -priority and dst_addr, and uint64_t for dst_name. +the msghdr in the ``recvmsg(2)`` call. They can be extracted using ``cmsg(3)`` macros, +with ``cmsg_level == SOL_J1939 && cmsg_type == SCM_J1939_DEST_ADDR``, +``SCM_J1939_DEST_NAME`` or ``SCM_J1939_PRIO``. The returned data is a ``uint8_t`` for +``priority`` and ``dst_addr``, and ``uint64_t`` for ``dst_name``. .. code-block:: C @@ -305,12 +305,12 @@ Dynamic Addressing Distinction has to be made between using the claimed address and doing an address claim. To use an already claimed address, one has to fill in the -j1939.name member and provide it to bind(2). If the name had claimed an address +``j1939.name`` member and provide it to ``bind(2)``. If the name had claimed an address earlier, all further messages being sent will use that address. And the -j1939.addr member will be ignored. +``j1939.addr`` member will be ignored. An exception on this is PGN 0x0ee00. This is the "Address Claim/Cannot Claim -Address" message and the kernel will use the j1939.addr member for that PGN if +Address" message and the kernel will use the ``j1939.addr`` member for that PGN if necessary. To claim an address following code example can be used: @@ -371,12 +371,12 @@ NAME can send packets. If another ECU claims the address, the kernel will mark the NAME-SA expired. No socket bound to the NAME can send packets (other than address claims). To -claim another address, some socket bound to NAME, must bind(2) again, but with -only j1939.addr changed to the new SA, and must then send a valid address claim +claim another address, some socket bound to NAME, must ``bind(2)`` again, but with +only ``j1939.addr`` changed to the new SA, and must then send a valid address claim packet. This restarts the state machine in the kernel (and any other participant on the bus) for this NAME. -can-utils also include the jacd tool, so it can be used as code example or as +``can-utils`` also include the ``j1939acd`` tool, so it can be used as code example or as default Address Claiming daemon. Send Examples @@ -403,8 +403,8 @@ Bind: bind(sock, (struct sockaddr *)&baddr, sizeof(baddr)); -Now, the socket 'sock' is bound to the SA 0x20. Since no connect(2) was called, -at this point we can use only sendto(2) or sendmsg(2). +Now, the socket 'sock' is bound to the SA 0x20. Since no ``connect(2)`` was called, +at this point we can use only ``sendto(2)`` or ``sendmsg(2)``. Send: @@ -414,8 +414,8 @@ Send: .can_family = AF_CAN, .can_addr.j1939 = { .name = J1939_NO_NAME; - .pgn = 0x30, - .addr = 0x12300, + .addr = 0x30, + .pgn = 0x12300, }, }; diff --git a/Documentation/networking/statistics.rst b/Documentation/networking/statistics.rst index 8e15bc98830b..234abedc29b2 100644 --- a/Documentation/networking/statistics.rst +++ b/Documentation/networking/statistics.rst @@ -175,5 +175,4 @@ The following structures are internal to the kernel, their members are translated to netlink attributes when dumped. Drivers must not overwrite the statistics they don't report with 0. -.. kernel-doc:: include/linux/ethtool.h - :identifiers: ethtool_pause_stats +- ethtool_pause_stats() diff --git a/Documentation/sphinx/automarkup.py b/Documentation/sphinx/automarkup.py index 409dbc4100de..3e81ebab26ed 100644 --- a/Documentation/sphinx/automarkup.py +++ b/Documentation/sphinx/automarkup.py @@ -16,28 +16,36 @@ import re from itertools import chain # +# Python 2 lacks re.ASCII... +# +try: + ascii_p3 = re.ASCII +except AttributeError: + ascii_p3 = 0 + +# # Regex nastiness. Of course. # Try to identify "function()" that's not already marked up some # other way. Sphinx doesn't like a lot of stuff right after a # :c:func: block (i.e. ":c:func:`mmap()`s" flakes out), so the last # bit tries to restrict matches to things that won't create trouble. # -RE_function = re.compile(r'\b(([a-zA-Z_]\w+)\(\))', flags=re.ASCII) +RE_function = re.compile(r'\b(([a-zA-Z_]\w+)\(\))', flags=ascii_p3) # # Sphinx 2 uses the same :c:type role for struct, union, enum and typedef # RE_generic_type = re.compile(r'\b(struct|union|enum|typedef)\s+([a-zA-Z_]\w+)', - flags=re.ASCII) + flags=ascii_p3) # # Sphinx 3 uses a different C role for each one of struct, union, enum and # typedef # -RE_struct = re.compile(r'\b(struct)\s+([a-zA-Z_]\w+)', flags=re.ASCII) -RE_union = re.compile(r'\b(union)\s+([a-zA-Z_]\w+)', flags=re.ASCII) -RE_enum = re.compile(r'\b(enum)\s+([a-zA-Z_]\w+)', flags=re.ASCII) -RE_typedef = re.compile(r'\b(typedef)\s+([a-zA-Z_]\w+)', flags=re.ASCII) +RE_struct = re.compile(r'\b(struct)\s+([a-zA-Z_]\w+)', flags=ascii_p3) +RE_union = re.compile(r'\b(union)\s+([a-zA-Z_]\w+)', flags=ascii_p3) +RE_enum = re.compile(r'\b(enum)\s+([a-zA-Z_]\w+)', flags=ascii_p3) +RE_typedef = re.compile(r'\b(typedef)\s+([a-zA-Z_]\w+)', flags=ascii_p3) # # Detects a reference to a documentation page of the form Documentation/... with diff --git a/Documentation/sphinx/kernel_abi.py b/Documentation/sphinx/kernel_abi.py new file mode 100644 index 000000000000..f3da859c9878 --- /dev/null +++ b/Documentation/sphinx/kernel_abi.py @@ -0,0 +1,194 @@ +# -*- coding: utf-8; mode: python -*- +# coding=utf-8 +# SPDX-License-Identifier: GPL-2.0 +# +u""" + kernel-abi + ~~~~~~~~~~ + + Implementation of the ``kernel-abi`` reST-directive. + + :copyright: Copyright (C) 2016 Markus Heiser + :copyright: Copyright (C) 2016-2020 Mauro Carvalho Chehab + :maintained-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> + :license: GPL Version 2, June 1991 see Linux/COPYING for details. + + The ``kernel-abi`` (:py:class:`KernelCmd`) directive calls the + scripts/get_abi.pl script to parse the Kernel ABI files. + + Overview of directive's argument and options. + + .. code-block:: rst + + .. kernel-abi:: <ABI directory location> + :debug: + + The argument ``<ABI directory location>`` is required. It contains the + location of the ABI files to be parsed. + + ``debug`` + Inserts a code-block with the *raw* reST. Sometimes it is helpful to see + what reST is generated. + +""" + +import codecs +import os +import subprocess +import sys +import re +import kernellog + +from os import path + +from docutils import nodes, statemachine +from docutils.statemachine import ViewList +from docutils.parsers.rst import directives, Directive +from docutils.utils.error_reporting import ErrorString + +# +# AutodocReporter is only good up to Sphinx 1.7 +# +import sphinx + +Use_SSI = sphinx.__version__[:3] >= '1.7' +if Use_SSI: + from sphinx.util.docutils import switch_source_input +else: + from sphinx.ext.autodoc import AutodocReporter + +__version__ = '1.0' + +def setup(app): + + app.add_directive("kernel-abi", KernelCmd) + return dict( + version = __version__ + , parallel_read_safe = True + , parallel_write_safe = True + ) + +class KernelCmd(Directive): + + u"""KernelABI (``kernel-abi``) directive""" + + required_arguments = 1 + optional_arguments = 2 + has_content = False + final_argument_whitespace = True + + option_spec = { + "debug" : directives.flag, + "rst" : directives.unchanged + } + + def run(self): + + doc = self.state.document + if not doc.settings.file_insertion_enabled: + raise self.warning("docutils: file insertion disabled") + + env = doc.settings.env + cwd = path.dirname(doc.current_source) + cmd = "get_abi.pl rest --enable-lineno --dir " + cmd += self.arguments[0] + + if 'rst' in self.options: + cmd += " --rst-source" + + srctree = path.abspath(os.environ["srctree"]) + + fname = cmd + + # extend PATH with $(srctree)/scripts + path_env = os.pathsep.join([ + srctree + os.sep + "scripts", + os.environ["PATH"] + ]) + shell_env = os.environ.copy() + shell_env["PATH"] = path_env + shell_env["srctree"] = srctree + + lines = self.runCmd(cmd, shell=True, cwd=cwd, env=shell_env) + nodeList = self.nestedParse(lines, self.arguments[0]) + return nodeList + + def runCmd(self, cmd, **kwargs): + u"""Run command ``cmd`` and return it's stdout as unicode.""" + + try: + proc = subprocess.Popen( + cmd + , stdout = subprocess.PIPE + , stderr = subprocess.PIPE + , **kwargs + ) + out, err = proc.communicate() + + out, err = codecs.decode(out, 'utf-8'), codecs.decode(err, 'utf-8') + + if proc.returncode != 0: + raise self.severe( + u"command '%s' failed with return code %d" + % (cmd, proc.returncode) + ) + except OSError as exc: + raise self.severe(u"problems with '%s' directive: %s." + % (self.name, ErrorString(exc))) + return out + + def nestedParse(self, lines, fname): + content = ViewList() + node = nodes.section() + + if "debug" in self.options: + code_block = "\n\n.. code-block:: rst\n :linenos:\n" + for l in lines.split("\n"): + code_block += "\n " + l + lines = code_block + "\n\n" + + line_regex = re.compile("^#define LINENO (\S+)\#([0-9]+)$") + ln = 0 + n = 0 + f = fname + + for line in lines.split("\n"): + n = n + 1 + match = line_regex.search(line) + if match: + new_f = match.group(1) + + # Sphinx parser is lazy: it stops parsing contents in the + # middle, if it is too big. So, handle it per input file + if new_f != f and content: + self.do_parse(content, node) + content = ViewList() + + f = new_f + + # sphinx counts lines from 0 + ln = int(match.group(2)) - 1 + else: + content.append(line, f, ln) + + kernellog.info(self.state.document.settings.env.app, "%s: parsed %i lines" % (fname, n)) + + if content: + self.do_parse(content, node) + + return node.children + + def do_parse(self, content, node): + if Use_SSI: + with switch_source_input(self.state, content): + self.state.nested_parse(content, 0, node, match_titles=1) + else: + buf = self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter + + self.state.memo.title_styles = [] + self.state.memo.section_level = 0 + self.state.memo.reporter = AutodocReporter(content, self.state.memo.reporter) + try: + self.state.nested_parse(content, 0, node, match_titles=1) + finally: + self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter = buf diff --git a/Documentation/sphinx/kernellog.py b/Documentation/sphinx/kernellog.py index af924f51a7dc..8ac7d274f542 100644 --- a/Documentation/sphinx/kernellog.py +++ b/Documentation/sphinx/kernellog.py @@ -25,4 +25,8 @@ def verbose(app, message): else: app.verbose(message) - +def info(app, message): + if UseLogging: + logger.info(message) + else: + app.info(message) diff --git a/Documentation/userspace-api/index.rst b/Documentation/userspace-api/index.rst index 69fc5167e648..acd2cc2a538d 100644 --- a/Documentation/userspace-api/index.rst +++ b/Documentation/userspace-api/index.rst @@ -22,6 +22,7 @@ place where this information is gathered. spec_ctrl accelerators/ocxl ioctl/index + iommu media/index .. only:: subproject and html diff --git a/Documentation/virt/kvm/cpuid.rst b/Documentation/virt/kvm/cpuid.rst index 7d81c0aa4a59..cf62162d4be2 100644 --- a/Documentation/virt/kvm/cpuid.rst +++ b/Documentation/virt/kvm/cpuid.rst @@ -92,6 +92,10 @@ KVM_FEATURE_ASYNC_PF_INT 14 guest checks this feature bit async pf acknowledgment msr 0x4b564d07. +KVM_FEATURE_MSI_EXT_DEST_ID 15 guest checks this feature bit + before using extended destination + ID bits in MSI address bits 11-5. + KVM_FEATURE_CLOCKSOURCE_STABLE_BIT 24 host will warn if no guest-side per-cpu warps are expected in kvmclock diff --git a/MAINTAINERS b/MAINTAINERS index e73636b75f29..cd123d0a6a2d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -934,7 +934,7 @@ M: Evan Quan <evan.quan@amd.com> L: amd-gfx@lists.freedesktop.org S: Supported T: git git://people.freedesktop.org/~agd5f/linux -F: drivers/gpu/drm/amd/powerplay/ +F: drivers/gpu/drm/amd/pm/powerplay/ AMD SEATTLE DEVICE TREE SUPPORT M: Brijesh Singh <brijeshkumar.singh@amd.com> @@ -978,7 +978,7 @@ M: Michael Hennerich <Michael.Hennerich@analog.com> L: linux-iio@vger.kernel.org S: Supported W: http://ez.analog.com/community/linux-device-drivers -F: Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt +F: Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml F: drivers/iio/adc/ad7768-1.c ANALOG DEVICES INC AD7780 DRIVER @@ -2375,7 +2375,6 @@ F: sound/soc/rockchip/ N: rockchip ARM/SAMSUNG EXYNOS ARM ARCHITECTURES -M: Kukjin Kim <kgene@kernel.org> M: Krzysztof Kozlowski <krzk@kernel.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-samsung-soc@vger.kernel.org @@ -2642,10 +2641,8 @@ F: drivers/pinctrl/visconti/ N: visconti ARM/UNIPHIER ARCHITECTURE -M: Masahiro Yamada <yamada.masahiro@socionext.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained -T: git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git +S: Orphan F: Documentation/devicetree/bindings/arm/socionext/uniphier.yaml F: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml F: Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml @@ -3860,7 +3857,7 @@ M: Roger Quadros <rogerq@ti.com> L: linux-usb@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git -F: Documentation/devicetree/bindings/usb/cdns-usb3.txt +F: Documentation/devicetree/bindings/usb/cdns,usb3.yaml F: drivers/usb/cdns3/ CADET FM/AM RADIO RECEIVER DRIVER @@ -5006,9 +5003,8 @@ T: git git://linuxtv.org/media_tree.git F: drivers/media/platform/sti/delta DENALI NAND DRIVER -M: Masahiro Yamada <yamada.masahiro@socionext.com> L: linux-mtd@lists.infradead.org -S: Supported +S: Orphan F: drivers/mtd/nand/raw/denali* DESIGNWARE EDMA CORE IP DRIVER @@ -7920,7 +7916,7 @@ HISILICON LPC BUS DRIVER M: john.garry@huawei.com S: Maintained W: http://www.hisilicon.com -F: Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt +F: Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml F: drivers/bus/hisi_lpc.c HISILICON NETWORK SUBSYSTEM 3 DRIVER (HNS3) @@ -8976,22 +8972,6 @@ S: Supported W: https://01.org/linux-acpi F: drivers/platform/x86/intel_menlow.c -INTEL MIC DRIVERS (mic) -M: Sudeep Dutt <sudeep.dutt@intel.com> -M: Ashutosh Dixit <ashutosh.dixit@intel.com> -S: Supported -W: https://github.com/sudeepdutt/mic -W: http://software.intel.com/en-us/mic-developer -F: Documentation/misc-devices/mic/ -F: drivers/dma/mic_x100_dma.c -F: drivers/dma/mic_x100_dma.h -F: drivers/misc/mic/ -F: include/linux/mic_bus.h -F: include/linux/scif.h -F: include/uapi/linux/mic_common.h -F: include/uapi/linux/mic_ioctl.h -F: include/uapi/linux/scif_ioctl.h - INTEL P-Unit IPC DRIVER M: Zha Qipeng <qipeng.zha@intel.com> L: platform-driver-x86@vger.kernel.org @@ -14547,6 +14527,14 @@ F: Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml F: drivers/mailbox/qcom-ipcc.c F: include/dt-bindings/mailbox/qcom-ipcc.h +QUALCOMM IPQ4019 VQMMC REGULATOR DRIVER +M: Robert Marko <robert.marko@sartura.hr> +M: Luka Perkov <luka.perkov@sartura.hr> +L: linux-arm-msm@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml +F: drivers/regulator/vqmmc-ipq4019-regulator.c + QUALCOMM RMNET DRIVER M: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> M: Sean Tranchetti <stranche@codeaurora.org> @@ -14902,7 +14890,6 @@ RENESAS ETHERNET DRIVERS R: Sergei Shtylyov <sergei.shtylyov@gmail.com> L: netdev@vger.kernel.org L: linux-renesas-soc@vger.kernel.org -F: Documentation/devicetree/bindings/net/renesas,*.txt F: Documentation/devicetree/bindings/net/renesas,*.yaml F: drivers/net/ethernet/renesas/ F: include/linux/sh_eth.h @@ -15372,7 +15359,6 @@ F: security/safesetid/ SAMSUNG AUDIO (ASoC) DRIVERS M: Krzysztof Kozlowski <krzk@kernel.org> -M: Sangbeom Kim <sbkim73@samsung.com> M: Sylwester Nawrocki <s.nawrocki@samsung.com> L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Supported @@ -15407,7 +15393,6 @@ S: Maintained F: drivers/platform/x86/samsung-laptop.c SAMSUNG MULTIFUNCTION PMIC DEVICE DRIVERS -M: Sangbeom Kim <sbkim73@samsung.com> M: Krzysztof Kozlowski <krzk@kernel.org> M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> L: linux-kernel@vger.kernel.org @@ -15489,7 +15474,6 @@ F: include/linux/clk/samsung.h F: include/linux/platform_data/clk-s3c2410.h SAMSUNG SPI DRIVERS -M: Kukjin Kim <kgene@kernel.org> M: Krzysztof Kozlowski <krzk@kernel.org> M: Andi Shyti <andi@etezian.org> L: linux-spi@vger.kernel.org @@ -18106,7 +18090,7 @@ M: Yu Chen <chenyu56@huawei.com> M: Binghui Wang <wangbinghui@hisilicon.com> L: linux-usb@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt +F: Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml F: drivers/phy/hisilicon/phy-hi3660-usb3.c USB ISP116X DRIVER @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Kleptomaniac Octopus # *DOCUMENTATION* diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S index 17fd1ed700cc..9152782444b5 100644 --- a/arch/arc/kernel/head.S +++ b/arch/arc/kernel/head.S @@ -67,7 +67,22 @@ sr r5, [ARC_REG_LPB_CTRL] 1: #endif /* CONFIG_ARC_LPB_DISABLE */ -#endif + + /* On HSDK, CCMs need to remapped super early */ +#ifdef CONFIG_ARC_SOC_HSDK + mov r6, 0x60000000 + lr r5, [ARC_REG_ICCM_BUILD] + breq r5, 0, 1f + sr r6, [ARC_REG_AUX_ICCM] +1: + lr r5, [ARC_REG_DCCM_BUILD] + breq r5, 0, 2f + sr r6, [ARC_REG_AUX_DCCM] +2: +#endif /* CONFIG_ARC_SOC_HSDK */ + +#endif /* CONFIG_ISA_ARCV2 */ + ; Config DSP_CTRL properly, so kernel may use integer multiply, ; multiply-accumulate, and divide operations DSP_EARLY_INIT diff --git a/arch/arc/kernel/stacktrace.c b/arch/arc/kernel/stacktrace.c index feba91c9d969..b23986f98450 100644 --- a/arch/arc/kernel/stacktrace.c +++ b/arch/arc/kernel/stacktrace.c @@ -112,7 +112,7 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs, int (*consumer_fn) (unsigned int, void *), void *arg) { #ifdef CONFIG_ARC_DW2_UNWIND - int ret = 0; + int ret = 0, cnt = 0; unsigned int address; struct unwind_frame_info frame_info; @@ -132,6 +132,11 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs, break; frame_info.regs.r63 = frame_info.regs.r31; + + if (cnt++ > 128) { + printk("unwinder looping too long, aborting !\n"); + return 0; + } } return address; /* return the last address it saw */ diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c index 0b63fc095b99..b3ea1fa11f87 100644 --- a/arch/arc/plat-hsdk/platform.c +++ b/arch/arc/plat-hsdk/platform.c @@ -17,22 +17,6 @@ int arc_hsdk_axi_dmac_coherent __section(".data") = 0; #define ARC_CCM_UNUSED_ADDR 0x60000000 -static void __init hsdk_init_per_cpu(unsigned int cpu) -{ - /* - * By default ICCM is mapped to 0x7z while this area is used for - * kernel virtual mappings, so move it to currently unused area. - */ - if (cpuinfo_arc700[cpu].iccm.sz) - write_aux_reg(ARC_REG_AUX_ICCM, ARC_CCM_UNUSED_ADDR); - - /* - * By default DCCM is mapped to 0x8z while this area is used by kernel, - * so move it to currently unused area. - */ - if (cpuinfo_arc700[cpu].dccm.sz) - write_aux_reg(ARC_REG_AUX_DCCM, ARC_CCM_UNUSED_ADDR); -} #define ARC_PERIPHERAL_BASE 0xf0000000 #define CREG_BASE (ARC_PERIPHERAL_BASE + 0x1000) @@ -339,5 +323,4 @@ static const char *hsdk_compat[] __initconst = { MACHINE_START(SIMULATION, "hsdk") .dt_compat = hsdk_compat, .init_early = hsdk_init_early, - .init_per_cpu = hsdk_init_per_cpu, MACHINE_END diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts index f1a41152e9dd..adde62d6fce7 100644 --- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts +++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts @@ -227,12 +227,12 @@ /delete-property/ #size-cells; spi-slave; status = "okay"; - ready-gpio = <&gpio 125 GPIO_ACTIVE_HIGH>; + ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>; slave { compatible = "olpc,xo1.75-ec"; spi-cpha; - cmd-gpio = <&gpio 155 GPIO_ACTIVE_HIGH>; + cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi index cc4efd0efabd..4ae630d37d09 100644 --- a/arch/arm/boot/dts/mmp3.dtsi +++ b/arch/arm/boot/dts/mmp3.dtsi @@ -296,6 +296,7 @@ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&soc_clocks MMP2_CLK_CCIC0>; clock-names = "axi"; + power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>; #clock-cells = <0>; clock-output-names = "mclk"; status = "disabled"; @@ -307,6 +308,7 @@ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&soc_clocks MMP2_CLK_CCIC1>; clock-names = "axi"; + power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>; #clock-cells = <0>; clock-output-names = "mclk"; status = "disabled"; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index ca109dc18238..2e77ccec3fc1 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -89,6 +89,14 @@ states = <1800000 0x1>, <2900000 0x0>; }; + + vin: vin { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -150,11 +158,18 @@ regulators { compatible = "st,stpmic1-regulators"; + buck1-supply = <&vin>; + buck2-supply = <&vin>; + buck3-supply = <&vin>; + buck4-supply = <&vin>; ldo1-supply = <&v3v3>; ldo2-supply = <&v3v3>; ldo3-supply = <&vdd_ddr>; + ldo4-supply = <&vin>; ldo5-supply = <&v3v3>; ldo6-supply = <&v3v3>; + vref_ddr-supply = <&vin>; + boost-supply = <&vin>; pwr_sw1-supply = <&bst_out>; pwr_sw2-supply = <&bst_out>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index a5307745719a..93398cfae97e 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -80,6 +80,14 @@ dais = <&sai2a_port &sai2b_port &i2s2_port>; status = "okay"; }; + + vin: vin { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -240,9 +248,18 @@ regulators { compatible = "st,stpmic1-regulators"; + buck1-supply = <&vin>; + buck2-supply = <&vin>; + buck3-supply = <&vin>; + buck4-supply = <&vin>; ldo1-supply = <&v3v3>; + ldo2-supply = <&vin>; ldo3-supply = <&vdd_ddr>; + ldo4-supply = <&vin>; + ldo5-supply = <&vin>; ldo6-supply = <&v3v3>; + vref_ddr-supply = <&vin>; + boost-supply = <&vin>; pwr_sw1-supply = <&bst_out>; pwr_sw2-supply = <&bst_out>; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 0f95a6ef8543..1c5a666c54b5 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -143,7 +143,7 @@ trips { cpu_alert0: cpu-alert0 { /* milliCelsius */ - temperature = <850000>; + temperature = <85000>; hysteresis = <2000>; type = "passive"; }; diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index aeb1209e0804..bb70acc6b526 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -93,6 +93,7 @@ CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_SPI_SPIDEV=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_MXC=y CONFIG_W1=y CONFIG_W1_MASTER_MXC=y CONFIG_W1_SLAVE_THERM=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 0fa79bd00219..221f5c340c86 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -217,6 +217,7 @@ CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCF857X=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_74X164=y +CONFIG_GPIO_MXC=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_SYSCON=y CONFIG_POWER_RESET_SYSCON_POWEROFF=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 70b709a669d2..e00be9faa23b 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -166,6 +166,7 @@ CONFIG_SPI_IMX=y CONFIG_SPI_ORION=y CONFIG_GPIO_ASPEED=m CONFIG_GPIO_ASPEED_SGPIO=y +CONFIG_GPIO_MXC=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_QNAP=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index e731cdf7c88c..a611b0c1e540 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -465,6 +465,7 @@ CONFIG_GPIO_PALMAS=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y CONFIG_GPIO_TWL4030=y +CONFIG_GPIO_MXC=y CONFIG_POWER_AVS=y CONFIG_ROCKCHIP_IODOMAIN=y CONFIG_POWER_RESET_AS3722=y diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 5f4922e858d0..f7f4620d59c3 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -41,6 +41,10 @@ SECTIONS #ifndef CONFIG_SMP_ON_UP *(.alt.smp.init) #endif +#ifndef CONFIG_ARM_UNWIND + *(.ARM.exidx) *(.ARM.exidx.*) + *(.ARM.extab) *(.ARM.extab.*) +#endif } . = PAGE_OFFSET + TEXT_OFFSET; diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S index 2d962fe48821..a3a64bf97250 100644 --- a/arch/arm/mach-mvebu/coherency_ll.S +++ b/arch/arm/mach-mvebu/coherency_ll.S @@ -35,13 +35,8 @@ ENTRY(ll_get_coherency_base) /* * MMU is disabled, use the physical address of the coherency - * base address. However, if the coherency fabric isn't mapped - * (i.e its virtual address is zero), it means coherency is - * not enabled, so we return 0. + * base address, (or 0x0 if the coherency fabric is not mapped) */ - ldr r1, =coherency_base - cmp r1, #0 - beq 2f adr r1, 3f ldr r3, [r1] ldr r1, [r1, r3] diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index d57112a276f5..c23dbf8bebee 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -354,8 +354,8 @@ static void __init free_highpages(void) /* set highmem page free */ for_each_free_mem_range(i, NUMA_NO_NODE, MEMBLOCK_NONE, &range_start, &range_end, NULL) { - unsigned long start = PHYS_PFN(range_start); - unsigned long end = PHYS_PFN(range_end); + unsigned long start = PFN_UP(range_start); + unsigned long end = PFN_DOWN(range_end); /* Ignore complete lowmem entries */ if (end <= max_low) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index f858c352f72a..1515f6f153a0 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -636,6 +636,26 @@ config ARM64_ERRATUM_1542419 If unsure, say Y. +config ARM64_ERRATUM_1508412 + bool "Cortex-A77: 1508412: workaround deadlock on sequence of NC/Device load and store exclusive or PAR read" + default y + help + This option adds a workaround for Arm Cortex-A77 erratum 1508412. + + Affected Cortex-A77 cores (r0p0, r1p0) could deadlock on a sequence + of a store-exclusive or read of PAR_EL1 and a load with device or + non-cacheable memory attributes. The workaround depends on a firmware + counterpart. + + KVM guests must also have the workaround implemented or they can + deadlock the system. + + Work around the issue by inserting DMB SY barriers around PAR_EL1 + register reads and warning KVM users. The DMB barrier is sufficient + to prevent a speculative PAR_EL1 read. + + If unsure, say Y. + config CAVIUM_ERRATUM_22375 bool "Cavium erratum 22375, 24313" default y @@ -982,7 +1002,7 @@ config NUMA config NODES_SHIFT int "Maximum NUMA Nodes (as a power of 2)" range 1 10 - default "2" + default "4" depends on NEED_MULTIPLE_NODES help Specify the maximum number of NUMA Nodes available on the target diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 6f2494dd6d60..5c4ac1c9f4e0 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -54,6 +54,7 @@ config ARCH_BCM_IPROC config ARCH_BERLIN bool "Marvell Berlin SoC Family" select DW_APB_ICTL + select DW_APB_TIMER_OF select GPIOLIB select PINCTRL help diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index cb1360ae1211..7740f97c240f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -584,3 +584,9 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&usb { + status = "okay"; + dr_mode = "otg"; + vbus-supply = <&usb_pwr>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index b9efc8469265..724ee179b316 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -171,6 +171,46 @@ #size-cells = <2>; ranges; + usb: usb@ffe09080 { + compatible = "amlogic,meson-axg-usb-ctrl"; + reg = <0x0 0xffe09080 0x0 0x20>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "usb_ctrl", "ddr"; + resets = <&reset RESET_USB_OTG>; + + dr_mode = "otg"; + + phys = <&usb2_phy1>; + phy-names = "usb2-phy1"; + + dwc2: usb@ff400000 { + compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; + reg = <0x0 0xff400000 0x0 0x40000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB1>; + clock-names = "otg"; + phys = <&usb2_phy1>; + dr_mode = "peripheral"; + g-rx-fifo-size = <192>; + g-np-tx-fifo-size = <128>; + g-tx-fifo-size = <128 128 16 16 16>; + }; + + dwc3: usb@ff500000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff500000 0x0 0x100000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk; + }; + }; + ethmac: ethernet@ff3f0000 { compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.70a", @@ -187,6 +227,8 @@ "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; + resets = <&reset RESET_ETHERNET>; + reset-names = "stmmaceth"; status = "disabled"; }; @@ -1734,6 +1776,16 @@ clock-names = "core", "clkin0", "clkin1"; resets = <&reset RESET_SD_EMMC_C>; }; + + usb2_phy1: phy@9020 { + compatible = "amlogic,meson-gxl-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0x9020 0x0 0x20>; + clocks = <&clkc CLKID_USB>; + clock-names = "phy"; + resets = <&reset RESET_USB_OTG>; + reset-names = "phy"; + }; }; sram: sram@fffc0000 { diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 1e83ec5b8c91..8514fe6a275a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -209,7 +209,7 @@ }; ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-axg-dwmac", + compatible = "amlogic,meson-g12a-dwmac", "snps,dwmac-3.70a", "snps,dwmac"; reg = <0x0 0xff3f0000 0x0 0x10000>, @@ -224,6 +224,8 @@ "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; + resets = <&reset RESET_ETHERNET>; + reset-names = "stmmaceth"; status = "disabled"; mdio0: mdio { @@ -282,6 +284,8 @@ hwrng: rng@218 { compatible = "amlogic,meson-rng"; reg = <0x0 0x218 0x0 0x4>; + clocks = <&clkc CLKID_RNG0>; + clock-names = "core"; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts index 5de2815ba99d..ce1198ad34e4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts @@ -19,7 +19,7 @@ regulator-min-microvolt = <680000>; regulator-max-microvolt = <1040000>; - pwms = <&pwm_AO_cd 1 1500 0>; + pwms = <&pwm_ab 0 1500 0>; }; &vddcpu_b { diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 0edd137151f8..726b91d3a905 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/meson-gxbb-power.h> +#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> #include <dt-bindings/thermal/thermal.h> / { @@ -575,6 +576,8 @@ interrupt-names = "macirq"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; + resets = <&reset RESET_ETHERNET>; + reset-names = "stmmaceth"; power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts index 03733fd92732..215d2f702623 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts @@ -20,17 +20,23 @@ compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7", "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; + + aliases { + /* ethernet1 is wan port */ + ethernet1 = &switch0port3; + ethernet3 = &switch0port1; + }; }; &switch0 { ports { - port@1 { + switch0port1: port@1 { reg = <1>; label = "lan1"; phy-handle = <&switch0phy0>; }; - port@3 { + switch0port3: port@3 { reg = <3>; label = "wan"; phy-handle = <&switch0phy2>; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts index 8570c5f47d7d..b6f4af8ebafb 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts @@ -19,17 +19,23 @@ model = "Globalscale Marvell ESPRESSOBin Board V7"; compatible = "globalscale,espressobin-v7", "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; + + aliases { + /* ethernet1 is wan port */ + ethernet1 = &switch0port3; + ethernet3 = &switch0port1; + }; }; &switch0 { ports { - port@1 { + switch0port1: port@1 { reg = <1>; label = "lan1"; phy-handle = <&switch0phy0>; }; - port@3 { + switch0port3: port@3 { reg = <3>; label = "wan"; phy-handle = <&switch0phy2>; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi index b97218c72727..0775c16e0ec8 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -13,6 +13,10 @@ / { aliases { ethernet0 = ð0; + /* for dsa slave device */ + ethernet1 = &switch0port1; + ethernet2 = &switch0port2; + ethernet3 = &switch0port3; serial0 = &uart0; serial1 = &uart1; }; @@ -120,7 +124,7 @@ #address-cells = <1>; #size-cells = <0>; - port@0 { + switch0port0: port@0 { reg = <0>; label = "cpu"; ethernet = <ð0>; @@ -131,19 +135,19 @@ }; }; - port@1 { + switch0port1: port@1 { reg = <1>; label = "wan"; phy-handle = <&switch0phy0>; }; - port@2 { + switch0port2: port@2 { reg = <2>; label = "lan0"; phy-handle = <&switch0phy1>; }; - port@3 { + switch0port3: port@3 { reg = <3>; label = "lan1"; phy-handle = <&switch0phy2>; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 17a2df6a263e..5cfe3cf6f2ac 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -500,6 +500,7 @@ CONFIG_GPIO_ALTERA=m CONFIG_GPIO_DWAPB=y CONFIG_GPIO_MB86S7X=y CONFIG_GPIO_MPC8XXX=y +CONFIG_GPIO_MXC=y CONFIG_GPIO_PL061=y CONFIG_GPIO_RCAR=y CONFIG_GPIO_UNIPHIER=y diff --git a/arch/arm64/include/asm/brk-imm.h b/arch/arm64/include/asm/brk-imm.h index e3d47b52161d..ec7720dbe2c8 100644 --- a/arch/arm64/include/asm/brk-imm.h +++ b/arch/arm64/include/asm/brk-imm.h @@ -10,6 +10,7 @@ * #imm16 values used for BRK instruction generation * 0x004: for installing kprobes * 0x005: for installing uprobes + * 0x006: for kprobe software single-step * Allowed values for kgdb are 0x400 - 0x7ff * 0x100: for triggering a fault on purpose (reserved) * 0x400: for dynamic BRK instruction @@ -19,6 +20,7 @@ */ #define KPROBES_BRK_IMM 0x004 #define UPROBES_BRK_IMM 0x005 +#define KPROBES_BRK_SS_IMM 0x006 #define FAULT_BRK_IMM 0x100 #define KGDB_DYN_DBG_BRK_IMM 0x400 #define KGDB_COMPILED_DBG_BRK_IMM 0x401 diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h index 0ac3e06a2118..63d43b5f82f6 100644 --- a/arch/arm64/include/asm/cache.h +++ b/arch/arm64/include/asm/cache.h @@ -24,6 +24,7 @@ #define CTR_L1IP(ctr) (((ctr) >> CTR_L1IP_SHIFT) & CTR_L1IP_MASK) #define ICACHE_POLICY_VPIPT 0 +#define ICACHE_POLICY_RESERVED 1 #define ICACHE_POLICY_VIPT 2 #define ICACHE_POLICY_PIPT 3 diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h index 42868dbd29fd..e7d98997c09c 100644 --- a/arch/arm64/include/asm/cpucaps.h +++ b/arch/arm64/include/asm/cpucaps.h @@ -65,7 +65,8 @@ #define ARM64_HAS_ARMv8_4_TTL 55 #define ARM64_HAS_TLB_RANGE 56 #define ARM64_MTE 57 +#define ARM64_WORKAROUND_1508412 58 -#define ARM64_NCAPS 58 +#define ARM64_NCAPS 59 #endif /* __ASM_CPUCAPS_H */ diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index f7e7144af174..97244d4feca9 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -375,6 +375,23 @@ cpucap_multi_entry_cap_matches(const struct arm64_cpu_capabilities *entry, return false; } +static __always_inline bool is_vhe_hyp_code(void) +{ + /* Only defined for code run in VHE hyp context */ + return __is_defined(__KVM_VHE_HYPERVISOR__); +} + +static __always_inline bool is_nvhe_hyp_code(void) +{ + /* Only defined for code run in NVHE hyp context */ + return __is_defined(__KVM_NVHE_HYPERVISOR__); +} + +static __always_inline bool is_hyp_code(void) +{ + return is_vhe_hyp_code() || is_nvhe_hyp_code(); +} + extern DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS); extern struct static_key_false cpu_hwcap_keys[ARM64_NCAPS]; extern struct static_key_false arm64_const_caps_ready; @@ -428,35 +445,40 @@ static __always_inline bool __cpus_have_const_cap(int num) } /* - * Test for a capability, possibly with a runtime check. + * Test for a capability without a runtime check. * - * Before capabilities are finalized, this behaves as cpus_have_cap(). + * Before capabilities are finalized, this will BUG(). * After capabilities are finalized, this is patched to avoid a runtime check. * * @num must be a compile-time constant. */ -static __always_inline bool cpus_have_const_cap(int num) +static __always_inline bool cpus_have_final_cap(int num) { if (system_capabilities_finalized()) return __cpus_have_const_cap(num); else - return cpus_have_cap(num); + BUG(); } /* - * Test for a capability without a runtime check. + * Test for a capability, possibly with a runtime check for non-hyp code. * - * Before capabilities are finalized, this will BUG(). + * For hyp code, this behaves the same as cpus_have_final_cap(). + * + * For non-hyp code: + * Before capabilities are finalized, this behaves as cpus_have_cap(). * After capabilities are finalized, this is patched to avoid a runtime check. * * @num must be a compile-time constant. */ -static __always_inline bool cpus_have_final_cap(int num) +static __always_inline bool cpus_have_const_cap(int num) { - if (system_capabilities_finalized()) + if (is_hyp_code()) + return cpus_have_final_cap(num); + else if (system_capabilities_finalized()) return __cpus_have_const_cap(num); else - BUG(); + return cpus_have_cap(num); } static inline void cpus_set_cap(unsigned int num) diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index 7219cddeba66..9e2e9a63c7b6 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -71,6 +71,7 @@ #define ARM_CPU_PART_CORTEX_A55 0xD05 #define ARM_CPU_PART_CORTEX_A76 0xD0B #define ARM_CPU_PART_NEOVERSE_N1 0xD0C +#define ARM_CPU_PART_CORTEX_A77 0xD0D #define APM_CPU_PART_POTENZA 0x000 @@ -105,6 +106,7 @@ #define MIDR_CORTEX_A55 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A55) #define MIDR_CORTEX_A76 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A76) #define MIDR_NEOVERSE_N1 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N1) +#define MIDR_CORTEX_A77 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A77) #define MIDR_THUNDERX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX) #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX) #define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX) diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h index 0b298f48f5bf..657c921fd784 100644 --- a/arch/arm64/include/asm/debug-monitors.h +++ b/arch/arm64/include/asm/debug-monitors.h @@ -53,6 +53,7 @@ /* kprobes BRK opcodes with ESR encoding */ #define BRK64_OPCODE_KPROBES (AARCH64_BREAK_MON | (KPROBES_BRK_IMM << 5)) +#define BRK64_OPCODE_KPROBES_SS (AARCH64_BREAK_MON | (KPROBES_BRK_SS_IMM << 5)) /* uprobes BRK opcodes with ESR encoding */ #define BRK64_OPCODE_UPROBES (AARCH64_BREAK_MON | (UPROBES_BRK_IMM << 5)) diff --git a/arch/arm64/include/asm/kprobes.h b/arch/arm64/include/asm/kprobes.h index 97e511d645a2..8699ce30f587 100644 --- a/arch/arm64/include/asm/kprobes.h +++ b/arch/arm64/include/asm/kprobes.h @@ -16,7 +16,7 @@ #include <linux/percpu.h> #define __ARCH_WANT_KPROBES_INSN_SLOT -#define MAX_INSN_SIZE 1 +#define MAX_INSN_SIZE 2 #define flush_insn_slot(p) do { } while (0) #define kretprobe_blacklist_size 0 diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index 0aecbab6a7fb..781d029b8aa8 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -239,6 +239,7 @@ enum vcpu_sysreg { #define cp14_DBGWCR0 (DBGWCR0_EL1 * 2) #define cp14_DBGWVR0 (DBGWVR0_EL1 * 2) #define cp14_DBGDCCINT (MDCCINT_EL1 * 2) +#define cp14_DBGVCR (DBGVCR32_EL2 * 2) #define NR_COPRO_REGS (NR_SYS_REGS * 2) diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index d52c1b3ce589..174817ba119c 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -1007,6 +1007,7 @@ #include <linux/build_bug.h> #include <linux/types.h> +#include <asm/alternative.h> #define __DEFINE_MRS_MSR_S_REGNUM \ " .irp num,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30\n" \ @@ -1095,6 +1096,14 @@ write_sysreg_s(__scs_new, sysreg); \ } while (0) +#define read_sysreg_par() ({ \ + u64 par; \ + asm(ALTERNATIVE("nop", "dmb sy", ARM64_WORKAROUND_1508412)); \ + par = read_sysreg(par_el1); \ + asm(ALTERNATIVE("nop", "dmb sy", ARM64_WORKAROUND_1508412)); \ + par; \ +}) + #endif #endif /* __ASM_SYSREG_H */ diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h index 09977acc007d..6069be50baf9 100644 --- a/arch/arm64/include/asm/virt.h +++ b/arch/arm64/include/asm/virt.h @@ -86,13 +86,12 @@ static inline bool is_kernel_in_hyp_mode(void) static __always_inline bool has_vhe(void) { /* - * The following macros are defined for code specic to VHE/nVHE. - * If has_vhe() is inlined into those compilation units, it can - * be determined statically. Otherwise fall back to caps. + * Code only run in VHE/NVHE hyp context can assume VHE is present or + * absent. Otherwise fall back to caps. */ - if (__is_defined(__KVM_VHE_HYPERVISOR__)) + if (is_vhe_hyp_code()) return true; - else if (__is_defined(__KVM_NVHE_HYPERVISOR__)) + else if (is_nvhe_hyp_code()) return false; else return cpus_have_final_cap(ARM64_HAS_VIRT_HOST_EXTN); diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index 24d75af344b1..61314fd70f13 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -523,6 +523,16 @@ const struct arm64_cpu_capabilities arm64_errata[] = { .cpu_enable = cpu_enable_trap_ctr_access, }, #endif +#ifdef CONFIG_ARM64_ERRATUM_1508412 + { + /* we depend on the firmware portion for correctness */ + .desc = "ARM erratum 1508412 (kernel portion)", + .capability = ARM64_WORKAROUND_1508412, + ERRATA_MIDR_RANGE(MIDR_CORTEX_A77, + 0, 0, + 1, 0), + }, +#endif { } }; diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c index 6a7bb3729d60..77605aec25fe 100644 --- a/arch/arm64/kernel/cpuinfo.c +++ b/arch/arm64/kernel/cpuinfo.c @@ -34,10 +34,10 @@ DEFINE_PER_CPU(struct cpuinfo_arm64, cpu_data); static struct cpuinfo_arm64 boot_cpu_data; static const char *icache_policy_str[] = { - [0 ... ICACHE_POLICY_PIPT] = "RESERVED/UNKNOWN", + [ICACHE_POLICY_VPIPT] = "VPIPT", + [ICACHE_POLICY_RESERVED] = "RESERVED/UNKNOWN", [ICACHE_POLICY_VIPT] = "VIPT", [ICACHE_POLICY_PIPT] = "PIPT", - [ICACHE_POLICY_VPIPT] = "VPIPT", }; unsigned long __icache_flags; @@ -334,10 +334,11 @@ static void cpuinfo_detect_icache_policy(struct cpuinfo_arm64 *info) case ICACHE_POLICY_VPIPT: set_bit(ICACHEF_VPIPT, &__icache_flags); break; - default: + case ICACHE_POLICY_RESERVED: case ICACHE_POLICY_VIPT: /* Assume aliasing */ set_bit(ICACHEF_ALIASING, &__icache_flags); + break; } pr_info("Detected %s I-cache on CPU%d\n", icache_policy_str[l1ip], cpu); diff --git a/arch/arm64/kernel/efi-header.S b/arch/arm64/kernel/efi-header.S index df67c0f2a077..a71844fb923e 100644 --- a/arch/arm64/kernel/efi-header.S +++ b/arch/arm64/kernel/efi-header.S @@ -147,6 +147,6 @@ efi_debug_entry: * correctly at this alignment, we must ensure that .text is * placed at a 4k boundary in the Image to begin with. */ - .align 12 + .balign SEGMENT_ALIGN efi_header_end: .endm diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index f30007dff35f..b295fb912b12 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -365,6 +365,9 @@ alternative_insn eret, nop, ARM64_UNMAP_KERNEL_AT_EL0 br x30 #endif .else + /* Ensure any device/NC reads complete */ + alternative_insn nop, "dmb sy", ARM64_WORKAROUND_1508412 + eret .endif sb diff --git a/arch/arm64/kernel/image-vars.h b/arch/arm64/kernel/image-vars.h index 61684a500914..c615b285ff5b 100644 --- a/arch/arm64/kernel/image-vars.h +++ b/arch/arm64/kernel/image-vars.h @@ -87,7 +87,6 @@ KVM_NVHE_ALIAS(__icache_flags); /* Kernel symbols needed for cpus_have_final/const_caps checks. */ KVM_NVHE_ALIAS(arm64_const_caps_ready); KVM_NVHE_ALIAS(cpu_hwcap_keys); -KVM_NVHE_ALIAS(cpu_hwcaps); /* Static keys which are set if a vGIC trap should be handled in hyp. */ KVM_NVHE_ALIAS(vgic_v2_cpuif_trap); diff --git a/arch/arm64/kernel/kexec_image.c b/arch/arm64/kernel/kexec_image.c index af9987c154ca..66adee8b5fc8 100644 --- a/arch/arm64/kernel/kexec_image.c +++ b/arch/arm64/kernel/kexec_image.c @@ -43,7 +43,7 @@ static void *image_load(struct kimage *image, u64 flags, value; bool be_image, be_kernel; struct kexec_buf kbuf; - unsigned long text_offset; + unsigned long text_offset, kernel_segment_number; struct kexec_segment *kernel_segment; int ret; @@ -88,11 +88,37 @@ static void *image_load(struct kimage *image, /* Adjust kernel segment with TEXT_OFFSET */ kbuf.memsz += text_offset; - ret = kexec_add_buffer(&kbuf); - if (ret) + kernel_segment_number = image->nr_segments; + + /* + * The location of the kernel segment may make it impossible to satisfy + * the other segment requirements, so we try repeatedly to find a + * location that will work. + */ + while ((ret = kexec_add_buffer(&kbuf)) == 0) { + /* Try to load additional data */ + kernel_segment = &image->segment[kernel_segment_number]; + ret = load_other_segments(image, kernel_segment->mem, + kernel_segment->memsz, initrd, + initrd_len, cmdline); + if (!ret) + break; + + /* + * We couldn't find space for the other segments; erase the + * kernel segment and try the next available hole. + */ + image->nr_segments -= 1; + kbuf.buf_min = kernel_segment->mem + kernel_segment->memsz; + kbuf.mem = KEXEC_BUF_MEM_UNKNOWN; + } + + if (ret) { + pr_err("Could not find any suitable kernel location!"); return ERR_PTR(ret); + } - kernel_segment = &image->segment[image->nr_segments - 1]; + kernel_segment = &image->segment[kernel_segment_number]; kernel_segment->mem += text_offset; kernel_segment->memsz -= text_offset; image->start = kernel_segment->mem; @@ -101,12 +127,7 @@ static void *image_load(struct kimage *image, kernel_segment->mem, kbuf.bufsz, kernel_segment->memsz); - /* Load additional data */ - ret = load_other_segments(image, - kernel_segment->mem, kernel_segment->memsz, - initrd, initrd_len, cmdline); - - return ERR_PTR(ret); + return 0; } #ifdef CONFIG_KEXEC_IMAGE_VERIFY_SIG diff --git a/arch/arm64/kernel/machine_kexec_file.c b/arch/arm64/kernel/machine_kexec_file.c index 5b0e67b93cdc..03210f644790 100644 --- a/arch/arm64/kernel/machine_kexec_file.c +++ b/arch/arm64/kernel/machine_kexec_file.c @@ -240,6 +240,11 @@ static int prepare_elf_headers(void **addr, unsigned long *sz) return ret; } +/* + * Tries to add the initrd and DTB to the image. If it is not possible to find + * valid locations, this function will undo changes to the image and return non + * zero. + */ int load_other_segments(struct kimage *image, unsigned long kernel_load_addr, unsigned long kernel_size, @@ -248,7 +253,8 @@ int load_other_segments(struct kimage *image, { struct kexec_buf kbuf; void *headers, *dtb = NULL; - unsigned long headers_sz, initrd_load_addr = 0, dtb_len; + unsigned long headers_sz, initrd_load_addr = 0, dtb_len, + orig_segments = image->nr_segments; int ret = 0; kbuf.image = image; @@ -334,6 +340,7 @@ int load_other_segments(struct kimage *image, return 0; out_err: + image->nr_segments = orig_segments; vfree(dtb); return ret; } diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c index deba738142ed..f11a1a1f7026 100644 --- a/arch/arm64/kernel/probes/kprobes.c +++ b/arch/arm64/kernel/probes/kprobes.c @@ -36,25 +36,16 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); static void __kprobes post_kprobe_handler(struct kprobe_ctlblk *, struct pt_regs *); -static int __kprobes patch_text(kprobe_opcode_t *addr, u32 opcode) -{ - void *addrs[1]; - u32 insns[1]; - - addrs[0] = addr; - insns[0] = opcode; - - return aarch64_insn_patch_text(addrs, insns, 1); -} - static void __kprobes arch_prepare_ss_slot(struct kprobe *p) { + kprobe_opcode_t *addr = p->ainsn.api.insn; + void *addrs[] = {addr, addr + 1}; + u32 insns[] = {p->opcode, BRK64_OPCODE_KPROBES_SS}; + /* prepare insn slot */ - patch_text(p->ainsn.api.insn, p->opcode); + aarch64_insn_patch_text(addrs, insns, 2); - flush_icache_range((uintptr_t) (p->ainsn.api.insn), - (uintptr_t) (p->ainsn.api.insn) + - MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); + flush_icache_range((uintptr_t)addr, (uintptr_t)(addr + MAX_INSN_SIZE)); /* * Needs restoring of return address after stepping xol. @@ -128,13 +119,18 @@ void *alloc_insn_page(void) /* arm kprobe: install breakpoint in text */ void __kprobes arch_arm_kprobe(struct kprobe *p) { - patch_text(p->addr, BRK64_OPCODE_KPROBES); + void *addr = p->addr; + u32 insn = BRK64_OPCODE_KPROBES; + + aarch64_insn_patch_text(&addr, &insn, 1); } /* disarm kprobe: remove breakpoint from text */ void __kprobes arch_disarm_kprobe(struct kprobe *p) { - patch_text(p->addr, p->opcode); + void *addr = p->addr; + + aarch64_insn_patch_text(&addr, &p->opcode, 1); } void __kprobes arch_remove_kprobe(struct kprobe *p) @@ -163,20 +159,15 @@ static void __kprobes set_current_kprobe(struct kprobe *p) } /* - * Interrupts need to be disabled before single-step mode is set, and not - * reenabled until after single-step mode ends. - * Without disabling interrupt on local CPU, there is a chance of - * interrupt occurrence in the period of exception return and start of - * out-of-line single-step, that result in wrongly single stepping - * into the interrupt handler. + * Mask all of DAIF while executing the instruction out-of-line, to keep things + * simple and avoid nesting exceptions. Interrupts do have to be disabled since + * the kprobe state is per-CPU and doesn't get migrated. */ static void __kprobes kprobes_save_local_irqflag(struct kprobe_ctlblk *kcb, struct pt_regs *regs) { kcb->saved_irqflag = regs->pstate & DAIF_MASK; - regs->pstate |= PSR_I_BIT; - /* Unmask PSTATE.D for enabling software step exceptions. */ - regs->pstate &= ~PSR_D_BIT; + regs->pstate |= DAIF_MASK; } static void __kprobes kprobes_restore_local_irqflag(struct kprobe_ctlblk *kcb, @@ -219,10 +210,7 @@ static void __kprobes setup_singlestep(struct kprobe *p, slot = (unsigned long)p->ainsn.api.insn; set_ss_context(kcb, slot); /* mark pending ss */ - - /* IRQs and single stepping do not mix well. */ kprobes_save_local_irqflag(kcb, regs); - kernel_enable_single_step(regs); instruction_pointer_set(regs, slot); } else { /* insn simulation */ @@ -273,12 +261,8 @@ post_kprobe_handler(struct kprobe_ctlblk *kcb, struct pt_regs *regs) } /* call post handler */ kcb->kprobe_status = KPROBE_HIT_SSDONE; - if (cur->post_handler) { - /* post_handler can hit breakpoint and single step - * again, so we enable D-flag for recursive exception. - */ + if (cur->post_handler) cur->post_handler(cur, regs, 0); - } reset_current_kprobe(); } @@ -302,8 +286,6 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr) if (!instruction_pointer(regs)) BUG(); - kernel_disable_single_step(); - if (kcb->kprobe_status == KPROBE_REENTER) restore_previous_kprobe(kcb); else @@ -365,10 +347,6 @@ static void __kprobes kprobe_handler(struct pt_regs *regs) * pre-handler and it returned non-zero, it will * modify the execution path and no need to single * stepping. Let's just reset current kprobe and exit. - * - * pre_handler can hit a breakpoint and can step thru - * before return, keep PSTATE D-flag enabled until - * pre_handler return back. */ if (!p->pre_handler || !p->pre_handler(p, regs)) { setup_singlestep(p, regs, kcb, 0); @@ -399,7 +377,7 @@ kprobe_ss_hit(struct kprobe_ctlblk *kcb, unsigned long addr) } static int __kprobes -kprobe_single_step_handler(struct pt_regs *regs, unsigned int esr) +kprobe_breakpoint_ss_handler(struct pt_regs *regs, unsigned int esr) { struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); int retval; @@ -409,16 +387,15 @@ kprobe_single_step_handler(struct pt_regs *regs, unsigned int esr) if (retval == DBG_HOOK_HANDLED) { kprobes_restore_local_irqflag(kcb, regs); - kernel_disable_single_step(); - post_kprobe_handler(kcb, regs); } return retval; } -static struct step_hook kprobes_step_hook = { - .fn = kprobe_single_step_handler, +static struct break_hook kprobes_break_ss_hook = { + .imm = KPROBES_BRK_SS_IMM, + .fn = kprobe_breakpoint_ss_handler, }; static int __kprobes @@ -486,7 +463,7 @@ int __kprobes arch_trampoline_kprobe(struct kprobe *p) int __init arch_init_kprobes(void) { register_kernel_break_hook(&kprobes_break_hook); - register_kernel_step_hook(&kprobes_step_hook); + register_kernel_break_hook(&kprobes_break_ss_hook); return 0; } diff --git a/arch/arm64/kernel/proton-pack.c b/arch/arm64/kernel/proton-pack.c index 25f3c80b5ffe..c18eb7d41274 100644 --- a/arch/arm64/kernel/proton-pack.c +++ b/arch/arm64/kernel/proton-pack.c @@ -135,8 +135,6 @@ static enum mitigation_state spectre_v2_get_cpu_hw_mitigation_state(void) return SPECTRE_VULNERABLE; } -#define SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED (1) - static enum mitigation_state spectre_v2_get_cpu_fw_mitigation_state(void) { int ret; diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index 82e75fc2c903..09c96f57818c 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -222,6 +222,7 @@ asmlinkage notrace void secondary_start_kernel(void) if (system_uses_irq_prio_masking()) init_gic_priority_masking(); + rcu_cpu_starting(cpu); preempt_disable(); trace_hardirqs_off(); diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile index 7f96a1a9f68c..79280c53b9a6 100644 --- a/arch/arm64/kernel/vdso32/Makefile +++ b/arch/arm64/kernel/vdso32/Makefile @@ -22,16 +22,21 @@ endif CC_COMPAT ?= $(CC) CC_COMPAT += $(CC_COMPAT_CLANG_FLAGS) + +ifneq ($(LLVM),) +LD_COMPAT ?= $(LD) +else +LD_COMPAT ?= $(CROSS_COMPILE_COMPAT)ld +endif else CC_COMPAT ?= $(CROSS_COMPILE_COMPAT)gcc +LD_COMPAT ?= $(CROSS_COMPILE_COMPAT)ld endif cc32-option = $(call try-run,\ $(CC_COMPAT) $(1) -c -x c /dev/null -o "$$TMP",$(1),$(2)) cc32-disable-warning = $(call try-run,\ $(CC_COMPAT) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1))) -cc32-ldoption = $(call try-run,\ - $(CC_COMPAT) $(1) -nostdlib -x c /dev/null -o "$$TMP",$(1),$(2)) cc32-as-instr = $(call try-run,\ printf "%b\n" "$(1)" | $(CC_COMPAT) $(VDSO_AFLAGS) -c -x assembler -o "$$TMP" -,$(2),$(3)) @@ -122,14 +127,10 @@ dmbinstr := $(call cc32-as-instr,dmb ishld,-DCONFIG_AS_DMB_ISHLD=1) VDSO_CFLAGS += $(dmbinstr) VDSO_AFLAGS += $(dmbinstr) -VDSO_LDFLAGS := $(VDSO_CPPFLAGS) # From arm vDSO Makefile -VDSO_LDFLAGS += -Wl,-Bsymbolic -Wl,--no-undefined -Wl,-soname=linux-vdso.so.1 -VDSO_LDFLAGS += -Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096 -VDSO_LDFLAGS += -nostdlib -shared -mfloat-abi=soft -VDSO_LDFLAGS += -Wl,--hash-style=sysv -VDSO_LDFLAGS += -Wl,--build-id=sha1 -VDSO_LDFLAGS += $(call cc32-ldoption,-fuse-ld=bfd) +VDSO_LDFLAGS += -Bsymbolic --no-undefined -soname=linux-vdso.so.1 +VDSO_LDFLAGS += -z max-page-size=4096 -z common-page-size=4096 +VDSO_LDFLAGS += -nostdlib -shared --hash-style=sysv --build-id=sha1 # Borrow vdsomunge.c from the arm vDSO @@ -189,8 +190,8 @@ quiet_cmd_vdsold_and_vdso_check = LD32 $@ cmd_vdsold_and_vdso_check = $(cmd_vdsold); $(cmd_vdso_check) quiet_cmd_vdsold = LD32 $@ - cmd_vdsold = $(CC_COMPAT) -Wp,-MD,$(depfile) $(VDSO_LDFLAGS) \ - -Wl,-T $(filter %.lds,$^) $(filter %.o,$^) -o $@ + cmd_vdsold = $(LD_COMPAT) $(VDSO_LDFLAGS) \ + -T $(filter %.lds,$^) $(filter %.o,$^) -o $@ quiet_cmd_vdsocc = CC32 $@ cmd_vdsocc = $(CC_COMPAT) -Wp,-MD,$(depfile) $(VDSO_CFLAGS) -c -o $@ $< quiet_cmd_vdsocc_gettimeofday = CC32 $@ diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S index 6d78c041fdf6..1bda604f4c70 100644 --- a/arch/arm64/kernel/vmlinux.lds.S +++ b/arch/arm64/kernel/vmlinux.lds.S @@ -278,7 +278,7 @@ SECTIONS * explicitly check instead of blindly discarding. */ .plt : { - *(.plt) *(.plt.*) *(.iplt) *(.igot) + *(.plt) *(.plt.*) *(.iplt) *(.igot .igot.plt) } ASSERT(SIZEOF(.plt) == 0, "Unexpected run-time procedure linkages detected!") diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index f56122eedffc..5750ec34960e 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -808,6 +808,25 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu) preempt_enable(); + /* + * The ARMv8 architecture doesn't give the hypervisor + * a mechanism to prevent a guest from dropping to AArch32 EL0 + * if implemented by the CPU. If we spot the guest in such + * state and that we decided it wasn't supposed to do so (like + * with the asymmetric AArch32 case), return to userspace with + * a fatal error. + */ + if (!system_supports_32bit_el0() && vcpu_mode_is_32bit(vcpu)) { + /* + * As we have caught the guest red-handed, decide that + * it isn't fit for purpose anymore by making the vcpu + * invalid. The VMM can try and fix it by issuing a + * KVM_ARM_VCPU_INIT if it really wants to. + */ + vcpu->arch.target = -1; + ret = ARM_EXCEPTION_IL; + } + ret = handle_exit(vcpu, ret); } @@ -1719,7 +1738,8 @@ int kvm_arch_init(void *opaque) return -ENODEV; } - if (cpus_have_final_cap(ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE)) + if (cpus_have_final_cap(ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE) || + cpus_have_final_cap(ARM64_WORKAROUND_1508412)) kvm_info("Guests without required CPU erratum workarounds can deadlock system!\n" \ "Only trusted guests should be used on this system.\n"); diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h index 313a8fa3c721..1f875a8f20c4 100644 --- a/arch/arm64/kvm/hyp/include/hyp/switch.h +++ b/arch/arm64/kvm/hyp/include/hyp/switch.h @@ -140,9 +140,9 @@ static inline bool __translate_far_to_hpfar(u64 far, u64 *hpfar) * We do need to save/restore PAR_EL1 though, as we haven't * saved the guest context yet, and we may return early... */ - par = read_sysreg(par_el1); + par = read_sysreg_par(); if (!__kvm_at("s1e1r", far)) - tmp = read_sysreg(par_el1); + tmp = read_sysreg_par(); else tmp = SYS_PAR_EL1_F; /* back to the guest */ write_sysreg(par, par_el1); @@ -421,7 +421,7 @@ static inline bool fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code) if (cpus_have_final_cap(ARM64_WORKAROUND_CAVIUM_TX2_219_TVM) && kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_SYS64 && handle_tx2_tvm(vcpu)) - return true; + goto guest; /* * We trap the first access to the FP/SIMD to save the host context @@ -431,13 +431,13 @@ static inline bool fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code) * Similarly for trapped SVE accesses. */ if (__hyp_handle_fpsimd(vcpu)) - return true; + goto guest; if (__hyp_handle_ptrauth(vcpu)) - return true; + goto guest; if (!__populate_fault_info(vcpu)) - return true; + goto guest; if (static_branch_unlikely(&vgic_v2_cpuif_trap)) { bool valid; @@ -452,7 +452,7 @@ static inline bool fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code) int ret = __vgic_v2_perform_cpuif_access(vcpu); if (ret == 1) - return true; + goto guest; /* Promote an illegal access to an SError.*/ if (ret == -1) @@ -468,12 +468,17 @@ static inline bool fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code) int ret = __vgic_v3_perform_cpuif_access(vcpu); if (ret == 1) - return true; + goto guest; } exit: /* Return to the host kernel and handle the exit */ return false; + +guest: + /* Re-enter the guest */ + asm(ALTERNATIVE("nop", "dmb sy", ARM64_WORKAROUND_1508412)); + return true; } static inline void __kvm_unexpected_el2_exception(void) diff --git a/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h b/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h index 7a986030145f..cce43bfe158f 100644 --- a/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h +++ b/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h @@ -43,7 +43,7 @@ static inline void __sysreg_save_el1_state(struct kvm_cpu_context *ctxt) ctxt_sys_reg(ctxt, CONTEXTIDR_EL1) = read_sysreg_el1(SYS_CONTEXTIDR); ctxt_sys_reg(ctxt, AMAIR_EL1) = read_sysreg_el1(SYS_AMAIR); ctxt_sys_reg(ctxt, CNTKCTL_EL1) = read_sysreg_el1(SYS_CNTKCTL); - ctxt_sys_reg(ctxt, PAR_EL1) = read_sysreg(par_el1); + ctxt_sys_reg(ctxt, PAR_EL1) = read_sysreg_par(); ctxt_sys_reg(ctxt, TPIDR_EL1) = read_sysreg(tpidr_el1); ctxt_sys_reg(ctxt, SP_EL1) = read_sysreg(sp_el1); diff --git a/arch/arm64/kvm/hyp/nvhe/host.S b/arch/arm64/kvm/hyp/nvhe/host.S index ff9a0f547b9f..ed27f06a31ba 100644 --- a/arch/arm64/kvm/hyp/nvhe/host.S +++ b/arch/arm64/kvm/hyp/nvhe/host.S @@ -17,8 +17,6 @@ SYM_FUNC_START(__host_exit) get_host_ctxt x0, x1 - ALTERNATIVE(nop, SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN) - /* Store the host regs x2 and x3 */ stp x2, x3, [x0, #CPU_XREG_OFFSET(2)] diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-init.S b/arch/arm64/kvm/hyp/nvhe/hyp-init.S index 47224dc62c51..b11a9d7db677 100644 --- a/arch/arm64/kvm/hyp/nvhe/hyp-init.S +++ b/arch/arm64/kvm/hyp/nvhe/hyp-init.S @@ -57,16 +57,25 @@ __do_hyp_init: cmp x0, #HVC_STUB_HCALL_NR b.lo __kvm_handle_stub_hvc - /* Set tpidr_el2 for use by HYP to free a register */ - msr tpidr_el2, x2 - - mov x2, #KVM_HOST_SMCCC_FUNC(__kvm_hyp_init) - cmp x0, x2 - b.eq 1f + // We only actively check bits [24:31], and everything + // else has to be zero, which we check at build time. +#if (KVM_HOST_SMCCC_FUNC(__kvm_hyp_init) & 0xFFFFFFFF00FFFFFF) +#error Unexpected __KVM_HOST_SMCCC_FUNC___kvm_hyp_init value +#endif + + ror x0, x0, #24 + eor x0, x0, #((KVM_HOST_SMCCC_FUNC(__kvm_hyp_init) >> 24) & 0xF) + ror x0, x0, #4 + eor x0, x0, #((KVM_HOST_SMCCC_FUNC(__kvm_hyp_init) >> 28) & 0xF) + cbz x0, 1f mov x0, #SMCCC_RET_NOT_SUPPORTED eret -1: phys_to_ttbr x0, x1 +1: + /* Set tpidr_el2 for use by HYP to free a register */ + msr tpidr_el2, x2 + + phys_to_ttbr x0, x1 alternative_if ARM64_HAS_CNP orr x0, x0, #TTBR_CNP_BIT alternative_else_nop_endif diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c index a457a0306e03..8ae8160bc93a 100644 --- a/arch/arm64/kvm/hyp/nvhe/switch.c +++ b/arch/arm64/kvm/hyp/nvhe/switch.c @@ -250,7 +250,7 @@ void __noreturn hyp_panic(void) { u64 spsr = read_sysreg_el2(SYS_SPSR); u64 elr = read_sysreg_el2(SYS_ELR); - u64 par = read_sysreg(par_el1); + u64 par = read_sysreg_par(); bool restore_host = true; struct kvm_cpu_context *host_ctxt; struct kvm_vcpu *vcpu; diff --git a/arch/arm64/kvm/hyp/nvhe/tlb.c b/arch/arm64/kvm/hyp/nvhe/tlb.c index 39ca71ab8866..fbde89a2c6e8 100644 --- a/arch/arm64/kvm/hyp/nvhe/tlb.c +++ b/arch/arm64/kvm/hyp/nvhe/tlb.c @@ -128,7 +128,6 @@ void __kvm_tlb_flush_local_vmid(struct kvm_s2_mmu *mmu) struct tlb_inv_context cxt; /* Switch to requested VMID */ - mmu = kern_hyp_va(mmu); __tlb_switch_to_guest(mmu, &cxt); __tlbi(vmalle1); diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c index 0cdf6e461cbd..0271b4a3b9fe 100644 --- a/arch/arm64/kvm/hyp/pgtable.c +++ b/arch/arm64/kvm/hyp/pgtable.c @@ -635,7 +635,7 @@ static void stage2_flush_dcache(void *addr, u64 size) static bool stage2_pte_cacheable(kvm_pte_t pte) { - u64 memattr = FIELD_GET(KVM_PTE_LEAF_ATTR_LO_S2_MEMATTR, pte); + u64 memattr = pte & KVM_PTE_LEAF_ATTR_LO_S2_MEMATTR; return memattr == PAGE_S2_MEMATTR(NORMAL); } @@ -846,7 +846,7 @@ int kvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm *kvm) u32 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0; pgd_sz = kvm_pgd_pages(ia_bits, start_level) * PAGE_SIZE; - pgt->pgd = alloc_pages_exact(pgd_sz, GFP_KERNEL | __GFP_ZERO); + pgt->pgd = alloc_pages_exact(pgd_sz, GFP_KERNEL_ACCOUNT | __GFP_ZERO); if (!pgt->pgd) return -ENOMEM; diff --git a/arch/arm64/kvm/hyp/vhe/switch.c b/arch/arm64/kvm/hyp/vhe/switch.c index fe69de16dadc..62546e20b251 100644 --- a/arch/arm64/kvm/hyp/vhe/switch.c +++ b/arch/arm64/kvm/hyp/vhe/switch.c @@ -215,7 +215,7 @@ void __noreturn hyp_panic(void) { u64 spsr = read_sysreg_el2(SYS_SPSR); u64 elr = read_sysreg_el2(SYS_ELR); - u64 par = read_sysreg(par_el1); + u64 par = read_sysreg_par(); __hyp_call_panic(spsr, elr, par); unreachable(); diff --git a/arch/arm64/kvm/hypercalls.c b/arch/arm64/kvm/hypercalls.c index 9824025ccc5c..25ea4ecb6449 100644 --- a/arch/arm64/kvm/hypercalls.c +++ b/arch/arm64/kvm/hypercalls.c @@ -31,7 +31,7 @@ int kvm_hvc_call_handler(struct kvm_vcpu *vcpu) val = SMCCC_RET_SUCCESS; break; case SPECTRE_UNAFFECTED: - val = SMCCC_RET_NOT_REQUIRED; + val = SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED; break; } break; diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c index 19aacc7d64de..57972bdb213a 100644 --- a/arch/arm64/kvm/mmu.c +++ b/arch/arm64/kvm/mmu.c @@ -787,14 +787,26 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, vma_shift = PAGE_SHIFT; } - if (vma_shift == PUD_SHIFT && - !fault_supports_stage2_huge_mapping(memslot, hva, PUD_SIZE)) - vma_shift = PMD_SHIFT; - - if (vma_shift == PMD_SHIFT && - !fault_supports_stage2_huge_mapping(memslot, hva, PMD_SIZE)) { - force_pte = true; + switch (vma_shift) { + case PUD_SHIFT: + if (fault_supports_stage2_huge_mapping(memslot, hva, PUD_SIZE)) + break; + fallthrough; + case CONT_PMD_SHIFT: + vma_shift = PMD_SHIFT; + fallthrough; + case PMD_SHIFT: + if (fault_supports_stage2_huge_mapping(memslot, hva, PMD_SIZE)) + break; + fallthrough; + case CONT_PTE_SHIFT: vma_shift = PAGE_SHIFT; + force_pte = true; + fallthrough; + case PAGE_SHIFT: + break; + default: + WARN_ONCE(1, "Unknown vma_shift %d", vma_shift); } vma_pagesize = 1UL << vma_shift; @@ -839,6 +851,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, if (kvm_is_device_pfn(pfn)) { device = true; + force_pte = true; } else if (logging_active && !write_fault) { /* * Only actually map the page as writable if this was a write diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index d9117bc56237..fb12d3ef423a 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -95,7 +95,7 @@ static bool __vcpu_read_sys_reg_from_cpu(int reg, u64 *val) case AMAIR_EL1: *val = read_sysreg_s(SYS_AMAIR_EL12); break; case CNTKCTL_EL1: *val = read_sysreg_s(SYS_CNTKCTL_EL12); break; case ELR_EL1: *val = read_sysreg_s(SYS_ELR_EL12); break; - case PAR_EL1: *val = read_sysreg_s(SYS_PAR_EL1); break; + case PAR_EL1: *val = read_sysreg_par(); break; case DACR32_EL2: *val = read_sysreg_s(SYS_DACR32_EL2); break; case IFSR32_EL2: *val = read_sysreg_s(SYS_IFSR32_EL2); break; case DBGVCR32_EL2: *val = read_sysreg_s(SYS_DBGVCR32_EL2); break; @@ -1897,9 +1897,9 @@ static const struct sys_reg_desc cp14_regs[] = { { Op1( 0), CRn( 0), CRm( 1), Op2( 0), trap_raz_wi }, DBG_BCR_BVR_WCR_WVR(1), /* DBGDCCINT */ - { Op1( 0), CRn( 0), CRm( 2), Op2( 0), trap_debug32 }, + { Op1( 0), CRn( 0), CRm( 2), Op2( 0), trap_debug32, NULL, cp14_DBGDCCINT }, /* DBGDSCRext */ - { Op1( 0), CRn( 0), CRm( 2), Op2( 2), trap_debug32 }, + { Op1( 0), CRn( 0), CRm( 2), Op2( 2), trap_debug32, NULL, cp14_DBGDSCRext }, DBG_BCR_BVR_WCR_WVR(2), /* DBGDTR[RT]Xint */ { Op1( 0), CRn( 0), CRm( 3), Op2( 0), trap_raz_wi }, @@ -1914,7 +1914,7 @@ static const struct sys_reg_desc cp14_regs[] = { { Op1( 0), CRn( 0), CRm( 6), Op2( 2), trap_raz_wi }, DBG_BCR_BVR_WCR_WVR(6), /* DBGVCR */ - { Op1( 0), CRn( 0), CRm( 7), Op2( 0), trap_debug32 }, + { Op1( 0), CRn( 0), CRm( 7), Op2( 0), trap_debug32, NULL, cp14_DBGVCR }, DBG_BCR_BVR_WCR_WVR(7), DBG_BCR_BVR_WCR_WVR(8), DBG_BCR_BVR_WCR_WVR(9), diff --git a/arch/arm64/lib/memcpy.S b/arch/arm64/lib/memcpy.S index e0bf83d556f2..dc8d2a216a6e 100644 --- a/arch/arm64/lib/memcpy.S +++ b/arch/arm64/lib/memcpy.S @@ -56,9 +56,8 @@ stp \reg1, \reg2, [\ptr], \val .endm - .weak memcpy SYM_FUNC_START_ALIAS(__memcpy) -SYM_FUNC_START_PI(memcpy) +SYM_FUNC_START_WEAK_PI(memcpy) #include "copy_template.S" ret SYM_FUNC_END_PI(memcpy) diff --git a/arch/arm64/lib/memmove.S b/arch/arm64/lib/memmove.S index 02cda2e33bde..1035dce4bdaf 100644 --- a/arch/arm64/lib/memmove.S +++ b/arch/arm64/lib/memmove.S @@ -45,9 +45,8 @@ C_h .req x12 D_l .req x13 D_h .req x14 - .weak memmove SYM_FUNC_START_ALIAS(__memmove) -SYM_FUNC_START_PI(memmove) +SYM_FUNC_START_WEAK_PI(memmove) cmp dstin, src b.lo __memcpy add tmp1, src, count diff --git a/arch/arm64/lib/memset.S b/arch/arm64/lib/memset.S index 77c3c7ba0084..a9c1c9a01ea9 100644 --- a/arch/arm64/lib/memset.S +++ b/arch/arm64/lib/memset.S @@ -42,9 +42,8 @@ dst .req x8 tmp3w .req w9 tmp3 .req x9 - .weak memset SYM_FUNC_START_ALIAS(__memset) -SYM_FUNC_START_PI(memset) +SYM_FUNC_START_WEAK_PI(memset) mov dst, dstin /* Preserve return value. */ and A_lw, val, #255 orr A_lw, A_lw, A_lw, lsl #8 diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 94c99c1c19e3..1ee94002801f 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -262,7 +262,7 @@ static bool __kprobes is_spurious_el1_translation_fault(unsigned long addr, local_irq_save(flags); asm volatile("at s1e1r, %0" :: "r" (addr)); isb(); - par = read_sysreg(par_el1); + par = read_sysreg_par(); local_irq_restore(flags); /* diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig index 0784bf3caf43..a4d3c578fbd8 100644 --- a/arch/s390/configs/debug_defconfig +++ b/arch/s390/configs/debug_defconfig @@ -93,9 +93,10 @@ CONFIG_CLEANCACHE=y CONFIG_FRONTSWAP=y CONFIG_CMA_DEBUG=y CONFIG_CMA_DEBUGFS=y +CONFIG_CMA_AREAS=7 CONFIG_MEM_SOFT_DIRTY=y CONFIG_ZSWAP=y -CONFIG_ZSMALLOC=m +CONFIG_ZSMALLOC=y CONFIG_ZSMALLOC_STAT=y CONFIG_DEFERRED_STRUCT_PAGE_INIT=y CONFIG_IDLE_PAGE_TRACKING=y @@ -378,7 +379,6 @@ CONFIG_NETLINK_DIAG=m CONFIG_CGROUP_NET_PRIO=y CONFIG_BPF_JIT=y CONFIG_NET_PKTGEN=m -# CONFIG_NET_DROP_MONITOR is not set CONFIG_PCI=y # CONFIG_PCIEASPM is not set CONFIG_PCI_DEBUG=y @@ -386,7 +386,7 @@ CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_S390=y CONFIG_DEVTMPFS=y CONFIG_CONNECTOR=y -CONFIG_ZRAM=m +CONFIG_ZRAM=y CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_DRBD=m @@ -689,6 +689,7 @@ CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_DH=m CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_ECRDSA=m +CONFIG_CRYPTO_SM2=m CONFIG_CRYPTO_CURVE25519=m CONFIG_CRYPTO_GCM=y CONFIG_CRYPTO_CHACHA20POLY1305=m @@ -709,7 +710,6 @@ CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA3=m -CONFIG_CRYPTO_SM3=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_AES_TI=m @@ -753,6 +753,7 @@ CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m CONFIG_CRYPTO_GHASH_S390=m CONFIG_CRYPTO_CRC32_S390=y +CONFIG_CRYPTO_DEV_VIRTIO=m CONFIG_CORDIC=m CONFIG_CRC32_SELFTEST=y CONFIG_CRC4=m @@ -829,6 +830,7 @@ CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=m CONFIG_FAULT_INJECTION=y CONFIG_FAILSLAB=y CONFIG_FAIL_PAGE_ALLOC=y +CONFIG_FAULT_INJECTION_USERCOPY=y CONFIG_FAIL_MAKE_REQUEST=y CONFIG_FAIL_IO_TIMEOUT=y CONFIG_FAIL_FUTEX=y diff --git a/arch/s390/configs/defconfig b/arch/s390/configs/defconfig index 905bc8c4cfaf..17d5df2c1eff 100644 --- a/arch/s390/configs/defconfig +++ b/arch/s390/configs/defconfig @@ -87,9 +87,10 @@ CONFIG_KSM=y CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_CLEANCACHE=y CONFIG_FRONTSWAP=y +CONFIG_CMA_AREAS=7 CONFIG_MEM_SOFT_DIRTY=y CONFIG_ZSWAP=y -CONFIG_ZSMALLOC=m +CONFIG_ZSMALLOC=y CONFIG_ZSMALLOC_STAT=y CONFIG_DEFERRED_STRUCT_PAGE_INIT=y CONFIG_IDLE_PAGE_TRACKING=y @@ -371,7 +372,6 @@ CONFIG_NETLINK_DIAG=m CONFIG_CGROUP_NET_PRIO=y CONFIG_BPF_JIT=y CONFIG_NET_PKTGEN=m -# CONFIG_NET_DROP_MONITOR is not set CONFIG_PCI=y # CONFIG_PCIEASPM is not set CONFIG_HOTPLUG_PCI=y @@ -379,7 +379,7 @@ CONFIG_HOTPLUG_PCI_S390=y CONFIG_UEVENT_HELPER=y CONFIG_DEVTMPFS=y CONFIG_CONNECTOR=y -CONFIG_ZRAM=m +CONFIG_ZRAM=y CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_DRBD=m @@ -680,6 +680,7 @@ CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_DH=m CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_ECRDSA=m +CONFIG_CRYPTO_SM2=m CONFIG_CRYPTO_CURVE25519=m CONFIG_CRYPTO_GCM=y CONFIG_CRYPTO_CHACHA20POLY1305=m @@ -701,7 +702,6 @@ CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA3=m -CONFIG_CRYPTO_SM3=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_AES_TI=m @@ -745,6 +745,7 @@ CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m CONFIG_CRYPTO_GHASH_S390=m CONFIG_CRYPTO_CRC32_S390=y +CONFIG_CRYPTO_DEV_VIRTIO=m CONFIG_CORDIC=m CONFIG_PRIME_NUMBERS=m CONFIG_CRC4=m diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig index 8f67c55625f9..a302630341ef 100644 --- a/arch/s390/configs/zfcpdump_defconfig +++ b/arch/s390/configs/zfcpdump_defconfig @@ -17,11 +17,11 @@ CONFIG_HZ_100=y # CONFIG_CHSC_SCH is not set # CONFIG_SCM_BUS is not set CONFIG_CRASH_DUMP=y -# CONFIG_SECCOMP is not set # CONFIG_PFAULT is not set # CONFIG_S390_HYPFS_FS is not set # CONFIG_VIRTUALIZATION is not set # CONFIG_S390_GUEST is not set +# CONFIG_SECCOMP is not set CONFIG_PARTITION_ADVANCED=y CONFIG_IBM_PARTITION=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 6b8d8c69b1a1..b5dbae78969b 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -692,16 +692,6 @@ static inline int pud_large(pud_t pud) return !!(pud_val(pud) & _REGION3_ENTRY_LARGE); } -static inline unsigned long pud_pfn(pud_t pud) -{ - unsigned long origin_mask; - - origin_mask = _REGION_ENTRY_ORIGIN; - if (pud_large(pud)) - origin_mask = _REGION3_ENTRY_ORIGIN_LARGE; - return (pud_val(pud) & origin_mask) >> PAGE_SHIFT; -} - #define pmd_leaf pmd_large static inline int pmd_large(pmd_t pmd) { @@ -747,16 +737,6 @@ static inline int pmd_none(pmd_t pmd) return pmd_val(pmd) == _SEGMENT_ENTRY_EMPTY; } -static inline unsigned long pmd_pfn(pmd_t pmd) -{ - unsigned long origin_mask; - - origin_mask = _SEGMENT_ENTRY_ORIGIN; - if (pmd_large(pmd)) - origin_mask = _SEGMENT_ENTRY_ORIGIN_LARGE; - return (pmd_val(pmd) & origin_mask) >> PAGE_SHIFT; -} - #define pmd_write pmd_write static inline int pmd_write(pmd_t pmd) { @@ -1238,11 +1218,39 @@ static inline pte_t mk_pte(struct page *page, pgprot_t pgprot) #define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) #define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) -#define pmd_deref(pmd) (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) -#define pud_deref(pud) (pud_val(pud) & _REGION_ENTRY_ORIGIN) #define p4d_deref(pud) (p4d_val(pud) & _REGION_ENTRY_ORIGIN) #define pgd_deref(pgd) (pgd_val(pgd) & _REGION_ENTRY_ORIGIN) +static inline unsigned long pmd_deref(pmd_t pmd) +{ + unsigned long origin_mask; + + origin_mask = _SEGMENT_ENTRY_ORIGIN; + if (pmd_large(pmd)) + origin_mask = _SEGMENT_ENTRY_ORIGIN_LARGE; + return pmd_val(pmd) & origin_mask; +} + +static inline unsigned long pmd_pfn(pmd_t pmd) +{ + return pmd_deref(pmd) >> PAGE_SHIFT; +} + +static inline unsigned long pud_deref(pud_t pud) +{ + unsigned long origin_mask; + + origin_mask = _REGION_ENTRY_ORIGIN; + if (pud_large(pud)) + origin_mask = _REGION3_ENTRY_ORIGIN_LARGE; + return pud_val(pud) & origin_mask; +} + +static inline unsigned long pud_pfn(pud_t pud) +{ + return pud_deref(pud) >> PAGE_SHIFT; +} + /* * The pgd_offset function *always* adds the index for the top-level * region/segment table. This is done to get a sequence like the diff --git a/arch/s390/include/asm/sections.h b/arch/s390/include/asm/sections.h index a996d3990a02..0c2151451ba5 100644 --- a/arch/s390/include/asm/sections.h +++ b/arch/s390/include/asm/sections.h @@ -26,14 +26,14 @@ static inline int arch_is_kernel_initmem_freed(unsigned long addr) * final .boot.data section, which should be identical in the decompressor and * the decompressed kernel (that is checked during the build). */ -#define __bootdata(var) __section(".boot.data.var") var +#define __bootdata(var) __section(".boot.data." #var) var /* * .boot.preserved.data is similar to .boot.data, but it is not part of the * .init section and thus will be preserved for later use in the decompressed * kernel. */ -#define __bootdata_preserved(var) __section(".boot.preserved.data.var") var +#define __bootdata_preserved(var) __section(".boot.preserved.data." #var) var extern unsigned long __sdma, __edma; extern unsigned long __stext_dma, __etext_dma; diff --git a/arch/s390/include/asm/vdso/vdso.h b/arch/s390/include/asm/vdso/vdso.h deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/arch/s390/include/asm/vdso/vdso.h +++ /dev/null diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index ece58f2217cb..2012c1cf0853 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -61,14 +61,6 @@ int main(void) BLANK(); OFFSET(__VDSO_GETCPU_VAL, vdso_per_cpu_data, getcpu_val); BLANK(); - /* constants used by the vdso */ - DEFINE(__CLOCK_REALTIME, CLOCK_REALTIME); - DEFINE(__CLOCK_MONOTONIC, CLOCK_MONOTONIC); - DEFINE(__CLOCK_REALTIME_COARSE, CLOCK_REALTIME_COARSE); - DEFINE(__CLOCK_MONOTONIC_COARSE, CLOCK_MONOTONIC_COARSE); - DEFINE(__CLOCK_THREAD_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID); - DEFINE(__CLOCK_COARSE_RES, LOW_RES_NSEC); - BLANK(); /* idle data offsets */ OFFSET(__CLOCK_IDLE_ENTER, s390_idle_data, clock_idle_enter); OFFSET(__CLOCK_IDLE_EXIT, s390_idle_data, clock_idle_exit); diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index ebfe86d097f0..390d97daa2b3 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -855,13 +855,14 @@ void __init smp_detect_cpus(void) static void smp_init_secondary(void) { - int cpu = smp_processor_id(); + int cpu = raw_smp_processor_id(); S390_lowcore.last_update_clock = get_tod_clock(); restore_access_regs(S390_lowcore.access_regs_save_area); set_cpu_flag(CIF_ASCE_PRIMARY); set_cpu_flag(CIF_ASCE_SECONDARY); cpu_init(); + rcu_cpu_starting(cpu); preempt_disable(); init_cpu_timer(); vtime_init(); diff --git a/arch/s390/pci/pci_event.c b/arch/s390/pci/pci_event.c index d33f21545dfd..9a6bae503fe6 100644 --- a/arch/s390/pci/pci_event.c +++ b/arch/s390/pci/pci_event.c @@ -101,6 +101,10 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf) if (ret) break; + /* the PCI function will be scanned once function 0 appears */ + if (!zdev->zbus->bus) + break; + pdev = pci_scan_single_device(zdev->zbus->bus, zdev->devfn); if (!pdev) break; diff --git a/arch/um/kernel/skas/clone.c b/arch/um/kernel/skas/clone.c index 95c355181dcd..bfb70c456b30 100644 --- a/arch/um/kernel/skas/clone.c +++ b/arch/um/kernel/skas/clone.c @@ -21,7 +21,7 @@ * on some systems. */ -void __section(".__syscall_stub") +void __attribute__ ((__section__ (".__syscall_stub"))) stub_clone_handler(void) { struct stub_data *data = (struct stub_data *) STUB_DATA; diff --git a/arch/x86/boot/compressed/ident_map_64.c b/arch/x86/boot/compressed/ident_map_64.c index a5e5db6ada3c..39b2eded7bc2 100644 --- a/arch/x86/boot/compressed/ident_map_64.c +++ b/arch/x86/boot/compressed/ident_map_64.c @@ -164,6 +164,7 @@ void initialize_identity_maps(void *rmode) add_identity_map(cmdline, cmdline + COMMAND_LINE_SIZE); /* Load the new page-table. */ + sev_verify_cbit(top_level_pgt); write_cr3(top_level_pgt); } diff --git a/arch/x86/boot/compressed/mem_encrypt.S b/arch/x86/boot/compressed/mem_encrypt.S index dd07e7b41b11..aa561795efd1 100644 --- a/arch/x86/boot/compressed/mem_encrypt.S +++ b/arch/x86/boot/compressed/mem_encrypt.S @@ -68,6 +68,9 @@ SYM_FUNC_START(get_sev_encryption_bit) SYM_FUNC_END(get_sev_encryption_bit) .code64 + +#include "../../kernel/sev_verify_cbit.S" + SYM_FUNC_START(set_sev_encryption_mask) #ifdef CONFIG_AMD_MEM_ENCRYPT push %rbp @@ -81,6 +84,19 @@ SYM_FUNC_START(set_sev_encryption_mask) bts %rax, sme_me_mask(%rip) /* Create the encryption mask */ + /* + * Read MSR_AMD64_SEV again and store it to sev_status. Can't do this in + * get_sev_encryption_bit() because this function is 32-bit code and + * shared between 64-bit and 32-bit boot path. + */ + movl $MSR_AMD64_SEV, %ecx /* Read the SEV MSR */ + rdmsr + + /* Store MSR value in sev_status */ + shlq $32, %rdx + orq %rdx, %rax + movq %rax, sev_status(%rip) + .Lno_sev_mask: movq %rbp, %rsp /* Restore original stack pointer */ @@ -96,5 +112,7 @@ SYM_FUNC_END(set_sev_encryption_mask) #ifdef CONFIG_AMD_MEM_ENCRYPT .balign 8 -SYM_DATA(sme_me_mask, .quad 0) +SYM_DATA(sme_me_mask, .quad 0) +SYM_DATA(sev_status, .quad 0) +SYM_DATA(sev_check_data, .quad 0) #endif diff --git a/arch/x86/boot/compressed/misc.h b/arch/x86/boot/compressed/misc.h index 6d31f1b4c4d1..d9a631c5973c 100644 --- a/arch/x86/boot/compressed/misc.h +++ b/arch/x86/boot/compressed/misc.h @@ -159,4 +159,6 @@ void boot_page_fault(void); void boot_stage1_vc(void); void boot_stage2_vc(void); +unsigned long sev_verify_cbit(unsigned long cr3); + #endif /* BOOT_COMPRESSED_MISC_H */ diff --git a/arch/x86/crypto/poly1305_glue.c b/arch/x86/crypto/poly1305_glue.c index e508dbd91813..c44aba290fbb 100644 --- a/arch/x86/crypto/poly1305_glue.c +++ b/arch/x86/crypto/poly1305_glue.c @@ -158,6 +158,7 @@ static unsigned int crypto_poly1305_setdctxkey(struct poly1305_desc_ctx *dctx, dctx->s[1] = get_unaligned_le32(&inp[4]); dctx->s[2] = get_unaligned_le32(&inp[8]); dctx->s[3] = get_unaligned_le32(&inp[12]); + acc += POLY1305_BLOCK_SIZE; dctx->sset = true; } } diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl index 1f47e24fb65c..379819244b91 100644 --- a/arch/x86/entry/syscalls/syscall_64.tbl +++ b/arch/x86/entry/syscalls/syscall_64.tbl @@ -364,10 +364,10 @@ 440 common process_madvise sys_process_madvise # -# x32-specific system call numbers start at 512 to avoid cache impact -# for native 64-bit operation. The __x32_compat_sys stubs are created -# on-the-fly for compat_sys_*() compatibility system calls if X86_X32 -# is defined. +# Due to a historical design error, certain syscalls are numbered differently +# in x32 as compared to native x86_64. These syscalls have numbers 512-547. +# Do not add new syscalls to this range. Numbers 548 and above are available +# for non-x32 use. # 512 x32 rt_sigaction compat_sys_rt_sigaction 513 x32 rt_sigreturn compat_sys_x32_rt_sigreturn @@ -405,3 +405,5 @@ 545 x32 execveat compat_sys_execveat 546 x32 preadv2 compat_sys_preadv64v2 547 x32 pwritev2 compat_sys_pwritev64v2 +# This is the end of the legacy x32 range. Numbers 548 and above are +# not special and are not to be used for x32-specific syscalls. diff --git a/arch/x86/hyperv/hv_apic.c b/arch/x86/hyperv/hv_apic.c index 40e0e322161d..284e73661a18 100644 --- a/arch/x86/hyperv/hv_apic.c +++ b/arch/x86/hyperv/hv_apic.c @@ -273,11 +273,15 @@ void __init hv_apic_init(void) pr_info("Hyper-V: Using enlightened APIC (%s mode)", x2apic_enabled() ? "x2apic" : "xapic"); /* - * With x2apic, architectural x2apic MSRs are equivalent to the - * respective synthetic MSRs, so there's no need to override - * the apic accessors. The only exception is - * hv_apic_eoi_write, because it benefits from lazy EOI when - * available, but it works for both xapic and x2apic modes. + * When in x2apic mode, don't use the Hyper-V specific APIC + * accessors since the field layout in the ICR register is + * different in x2apic mode. Furthermore, the architectural + * x2apic MSRs function just as well as the Hyper-V + * synthetic APIC MSRs, so there's no benefit in having + * separate Hyper-V accessors for x2apic mode. The only + * exception is hv_apic_eoi_write, because it benefits from + * lazy EOI when available, but the same accessor works for + * both xapic and x2apic because the field layout is the same. */ apic_set_eoi_write(hv_apic_eoi_write); if (!x2apic_enabled()) { diff --git a/arch/x86/include/uapi/asm/kvm_para.h b/arch/x86/include/uapi/asm/kvm_para.h index 812e9b4c1114..950afebfba88 100644 --- a/arch/x86/include/uapi/asm/kvm_para.h +++ b/arch/x86/include/uapi/asm/kvm_para.h @@ -32,6 +32,7 @@ #define KVM_FEATURE_POLL_CONTROL 12 #define KVM_FEATURE_PV_SCHED_YIELD 13 #define KVM_FEATURE_ASYNC_PF_INT 14 +#define KVM_FEATURE_MSI_EXT_DEST_ID 15 #define KVM_HINTS_REALTIME 0 diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 4adbe65afe23..2400ad62f330 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -807,6 +807,15 @@ static inline temp_mm_state_t use_temporary_mm(struct mm_struct *mm) temp_mm_state_t temp_state; lockdep_assert_irqs_disabled(); + + /* + * Make sure not to be in TLB lazy mode, as otherwise we'll end up + * with a stale address space WITHOUT being in lazy mode after + * restoring the previous mm. + */ + if (this_cpu_read(cpu_tlbstate.is_lazy)) + leave_mm(smp_processor_id()); + temp_state.mm = this_cpu_read(cpu_tlbstate.loaded_mm); switch_mm_irqs_off(NULL, mm, current); diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 7eb2a1c87969..3c417734790f 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -161,6 +161,21 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) /* Setup early boot stage 4-/5-level pagetables. */ addq phys_base(%rip), %rax + + /* + * For SEV guests: Verify that the C-bit is correct. A malicious + * hypervisor could lie about the C-bit position to perform a ROP + * attack on the guest by writing to the unencrypted stack and wait for + * the next RET instruction. + * %rsi carries pointer to realmode data and is callee-clobbered. Save + * and restore it. + */ + pushq %rsi + movq %rax, %rdi + call sev_verify_cbit + popq %rsi + + /* Switch to new page-table */ movq %rax, %cr3 /* Ensure I am executing from virtual addresses */ @@ -279,6 +294,7 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) SYM_CODE_END(secondary_startup_64) #include "verify_cpu.S" +#include "sev_verify_cbit.S" #ifdef CONFIG_HOTPLUG_CPU /* diff --git a/arch/x86/kernel/kexec-bzimage64.c b/arch/x86/kernel/kexec-bzimage64.c index 57c2ecf43134..ce831f9448e7 100644 --- a/arch/x86/kernel/kexec-bzimage64.c +++ b/arch/x86/kernel/kexec-bzimage64.c @@ -200,8 +200,7 @@ setup_boot_parameters(struct kimage *image, struct boot_params *params, params->hdr.hardware_subarch = boot_params.hdr.hardware_subarch; /* Copying screen_info will do? */ - memcpy(¶ms->screen_info, &boot_params.screen_info, - sizeof(struct screen_info)); + memcpy(¶ms->screen_info, &screen_info, sizeof(struct screen_info)); /* Fill in memsize later */ params->screen_info.ext_mem_k = 0; diff --git a/arch/x86/kernel/sev-es-shared.c b/arch/x86/kernel/sev-es-shared.c index 5f83ccaab877..7d04b356d44d 100644 --- a/arch/x86/kernel/sev-es-shared.c +++ b/arch/x86/kernel/sev-es-shared.c @@ -178,6 +178,32 @@ void __init do_vc_no_ghcb(struct pt_regs *regs, unsigned long exit_code) goto fail; regs->dx = val >> 32; + /* + * This is a VC handler and the #VC is only raised when SEV-ES is + * active, which means SEV must be active too. Do sanity checks on the + * CPUID results to make sure the hypervisor does not trick the kernel + * into the no-sev path. This could map sensitive data unencrypted and + * make it accessible to the hypervisor. + * + * In particular, check for: + * - Hypervisor CPUID bit + * - Availability of CPUID leaf 0x8000001f + * - SEV CPUID bit. + * + * The hypervisor might still report the wrong C-bit position, but this + * can't be checked here. + */ + + if ((fn == 1 && !(regs->cx & BIT(31)))) + /* Hypervisor bit */ + goto fail; + else if (fn == 0x80000000 && (regs->ax < 0x8000001f)) + /* SEV leaf check */ + goto fail; + else if ((fn == 0x8000001f && !(regs->ax & BIT(1)))) + /* SEV bit */ + goto fail; + /* Skip over the CPUID two-byte opcode */ regs->ip += 2; diff --git a/arch/x86/kernel/sev-es.c b/arch/x86/kernel/sev-es.c index 4a96726fbaf8..0bd1a0fc587e 100644 --- a/arch/x86/kernel/sev-es.c +++ b/arch/x86/kernel/sev-es.c @@ -374,8 +374,8 @@ fault: return ES_EXCEPTION; } -static bool vc_slow_virt_to_phys(struct ghcb *ghcb, struct es_em_ctxt *ctxt, - unsigned long vaddr, phys_addr_t *paddr) +static enum es_result vc_slow_virt_to_phys(struct ghcb *ghcb, struct es_em_ctxt *ctxt, + unsigned long vaddr, phys_addr_t *paddr) { unsigned long va = (unsigned long)vaddr; unsigned int level; @@ -394,15 +394,19 @@ static bool vc_slow_virt_to_phys(struct ghcb *ghcb, struct es_em_ctxt *ctxt, if (user_mode(ctxt->regs)) ctxt->fi.error_code |= X86_PF_USER; - return false; + return ES_EXCEPTION; } + if (WARN_ON_ONCE(pte_val(*pte) & _PAGE_ENC)) + /* Emulated MMIO to/from encrypted memory not supported */ + return ES_UNSUPPORTED; + pa = (phys_addr_t)pte_pfn(*pte) << PAGE_SHIFT; pa |= va & ~page_level_mask(level); *paddr = pa; - return true; + return ES_OK; } /* Include code shared with pre-decompression boot stage */ @@ -731,6 +735,7 @@ static enum es_result vc_do_mmio(struct ghcb *ghcb, struct es_em_ctxt *ctxt, { u64 exit_code, exit_info_1, exit_info_2; unsigned long ghcb_pa = __pa(ghcb); + enum es_result res; phys_addr_t paddr; void __user *ref; @@ -740,11 +745,12 @@ static enum es_result vc_do_mmio(struct ghcb *ghcb, struct es_em_ctxt *ctxt, exit_code = read ? SVM_VMGEXIT_MMIO_READ : SVM_VMGEXIT_MMIO_WRITE; - if (!vc_slow_virt_to_phys(ghcb, ctxt, (unsigned long)ref, &paddr)) { - if (!read) + res = vc_slow_virt_to_phys(ghcb, ctxt, (unsigned long)ref, &paddr); + if (res != ES_OK) { + if (res == ES_EXCEPTION && !read) ctxt->fi.error_code |= X86_PF_WRITE; - return ES_EXCEPTION; + return res; } exit_info_1 = paddr; diff --git a/arch/x86/kernel/sev_verify_cbit.S b/arch/x86/kernel/sev_verify_cbit.S new file mode 100644 index 000000000000..ee04941a6546 --- /dev/null +++ b/arch/x86/kernel/sev_verify_cbit.S @@ -0,0 +1,89 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * sev_verify_cbit.S - Code for verification of the C-bit position reported + * by the Hypervisor when running with SEV enabled. + * + * Copyright (c) 2020 Joerg Roedel (jroedel@suse.de) + * + * sev_verify_cbit() is called before switching to a new long-mode page-table + * at boot. + * + * Verify that the C-bit position is correct by writing a random value to + * an encrypted memory location while on the current page-table. Then it + * switches to the new page-table to verify the memory content is still the + * same. After that it switches back to the current page-table and when the + * check succeeded it returns. If the check failed the code invalidates the + * stack pointer and goes into a hlt loop. The stack-pointer is invalidated to + * make sure no interrupt or exception can get the CPU out of the hlt loop. + * + * New page-table pointer is expected in %rdi (first parameter) + * + */ +SYM_FUNC_START(sev_verify_cbit) +#ifdef CONFIG_AMD_MEM_ENCRYPT + /* First check if a C-bit was detected */ + movq sme_me_mask(%rip), %rsi + testq %rsi, %rsi + jz 3f + + /* sme_me_mask != 0 could mean SME or SEV - Check also for SEV */ + movq sev_status(%rip), %rsi + testq %rsi, %rsi + jz 3f + + /* Save CR4 in %rsi */ + movq %cr4, %rsi + + /* Disable Global Pages */ + movq %rsi, %rdx + andq $(~X86_CR4_PGE), %rdx + movq %rdx, %cr4 + + /* + * Verified that running under SEV - now get a random value using + * RDRAND. This instruction is mandatory when running as an SEV guest. + * + * Don't bail out of the loop if RDRAND returns errors. It is better to + * prevent forward progress than to work with a non-random value here. + */ +1: rdrand %rdx + jnc 1b + + /* Store value to memory and keep it in %rdx */ + movq %rdx, sev_check_data(%rip) + + /* Backup current %cr3 value to restore it later */ + movq %cr3, %rcx + + /* Switch to new %cr3 - This might unmap the stack */ + movq %rdi, %cr3 + + /* + * Compare value in %rdx with memory location. If C-bit is incorrect + * this would read the encrypted data and make the check fail. + */ + cmpq %rdx, sev_check_data(%rip) + + /* Restore old %cr3 */ + movq %rcx, %cr3 + + /* Restore previous CR4 */ + movq %rsi, %cr4 + + /* Check CMPQ result */ + je 3f + + /* + * The check failed, prevent any forward progress to prevent ROP + * attacks, invalidate the stack and go into a hlt loop. + */ + xorq %rsp, %rsp + subq $0x1000, %rsp +2: hlt + jmp 2b +3: +#endif + /* Return page-table pointer */ + movq %rdi, %rax + ret +SYM_FUNC_END(sev_verify_cbit) diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 3c70fb34028b..e19df6cde35d 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -793,19 +793,6 @@ static __always_inline unsigned long debug_read_clear_dr6(void) set_debugreg(DR6_RESERVED, 6); dr6 ^= DR6_RESERVED; /* Flip to positive polarity */ - /* - * Clear the virtual DR6 value, ptrace routines will set bits here for - * things we want signals for. - */ - current->thread.virtual_dr6 = 0; - - /* - * The SDM says "The processor clears the BTF flag when it - * generates a debug exception." Clear TIF_BLOCKSTEP to keep - * TIF_BLOCKSTEP in sync with the hardware BTF flag. - */ - clear_thread_flag(TIF_BLOCKSTEP); - return dr6; } @@ -873,6 +860,20 @@ static __always_inline void exc_debug_kernel(struct pt_regs *regs, */ WARN_ON_ONCE(user_mode(regs)); + if (test_thread_flag(TIF_BLOCKSTEP)) { + /* + * The SDM says "The processor clears the BTF flag when it + * generates a debug exception." but PTRACE_BLOCKSTEP requested + * it for userspace, but we just took a kernel #DB, so re-set + * BTF. + */ + unsigned long debugctl; + + rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctl); + debugctl |= DEBUGCTLMSR_BTF; + wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctl); + } + /* * Catch SYSENTER with TF set and clear DR_STEP. If this hit a * watchpoint at the same time then that will still be handled. @@ -936,6 +937,22 @@ static __always_inline void exc_debug_user(struct pt_regs *regs, instrumentation_begin(); /* + * Start the virtual/ptrace DR6 value with just the DR_STEP mask + * of the real DR6. ptrace_triggered() will set the DR_TRAPn bits. + * + * Userspace expects DR_STEP to be visible in ptrace_get_debugreg(6) + * even if it is not the result of PTRACE_SINGLESTEP. + */ + current->thread.virtual_dr6 = (dr6 & DR_STEP); + + /* + * The SDM says "The processor clears the BTF flag when it + * generates a debug exception." Clear TIF_BLOCKSTEP to keep + * TIF_BLOCKSTEP in sync with the hardware BTF flag. + */ + clear_thread_flag(TIF_BLOCKSTEP); + + /* * If dr6 has no reason to give us about the origin of this trap, * then it's very likely the result of an icebp/int01 trap. * User wants a sigtrap for that. diff --git a/arch/x86/kernel/unwind_orc.c b/arch/x86/kernel/unwind_orc.c index 6a339ce328e0..73f800100066 100644 --- a/arch/x86/kernel/unwind_orc.c +++ b/arch/x86/kernel/unwind_orc.c @@ -321,19 +321,12 @@ EXPORT_SYMBOL_GPL(unwind_get_return_address); unsigned long *unwind_get_return_address_ptr(struct unwind_state *state) { - struct task_struct *task = state->task; - if (unwind_done(state)) return NULL; if (state->regs) return &state->regs->ip; - if (task != current && state->sp == task->thread.sp) { - struct inactive_task_frame *frame = (void *)task->thread.sp; - return &frame->ret_addr; - } - if (state->sp) return (unsigned long *)state->sp - 1; @@ -663,7 +656,7 @@ void __unwind_start(struct unwind_state *state, struct task_struct *task, } else { struct inactive_task_frame *frame = (void *)task->thread.sp; - state->sp = task->thread.sp; + state->sp = task->thread.sp + sizeof(*frame); state->bp = READ_ONCE_NOCHECK(frame->bp); state->ip = READ_ONCE_NOCHECK(frame->ret_addr); state->signal = (void *)state->ip == ret_from_fork; diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c index 17587f496ec7..1f96adff8dc4 100644 --- a/arch/x86/kvm/mmu/mmu.c +++ b/arch/x86/kvm/mmu/mmu.c @@ -225,7 +225,7 @@ static gfn_t get_mmio_spte_gfn(u64 spte) { u64 gpa = spte & shadow_nonpresent_or_rsvd_lower_gfn_mask; - gpa |= (spte >> shadow_nonpresent_or_rsvd_mask_len) + gpa |= (spte >> SHADOW_NONPRESENT_OR_RSVD_MASK_LEN) & shadow_nonpresent_or_rsvd_mask; return gpa >> PAGE_SHIFT; @@ -591,15 +591,15 @@ static u64 mmu_spte_get_lockless(u64 *sptep) static u64 restore_acc_track_spte(u64 spte) { u64 new_spte = spte; - u64 saved_bits = (spte >> shadow_acc_track_saved_bits_shift) - & shadow_acc_track_saved_bits_mask; + u64 saved_bits = (spte >> SHADOW_ACC_TRACK_SAVED_BITS_SHIFT) + & SHADOW_ACC_TRACK_SAVED_BITS_MASK; WARN_ON_ONCE(spte_ad_enabled(spte)); WARN_ON_ONCE(!is_access_track_spte(spte)); new_spte &= ~shadow_acc_track_mask; - new_spte &= ~(shadow_acc_track_saved_bits_mask << - shadow_acc_track_saved_bits_shift); + new_spte &= ~(SHADOW_ACC_TRACK_SAVED_BITS_MASK << + SHADOW_ACC_TRACK_SAVED_BITS_SHIFT); new_spte |= saved_bits; return new_spte; diff --git a/arch/x86/kvm/mmu/spte.c b/arch/x86/kvm/mmu/spte.c index d9c5665a55e9..fcac2cac78fe 100644 --- a/arch/x86/kvm/mmu/spte.c +++ b/arch/x86/kvm/mmu/spte.c @@ -55,7 +55,7 @@ u64 make_mmio_spte(struct kvm_vcpu *vcpu, u64 gfn, unsigned int access) mask |= shadow_mmio_value | access; mask |= gpa | shadow_nonpresent_or_rsvd_mask; mask |= (gpa & shadow_nonpresent_or_rsvd_mask) - << shadow_nonpresent_or_rsvd_mask_len; + << SHADOW_NONPRESENT_OR_RSVD_MASK_LEN; return mask; } @@ -231,12 +231,12 @@ u64 mark_spte_for_access_track(u64 spte) !spte_can_locklessly_be_made_writable(spte), "kvm: Writable SPTE is not locklessly dirty-trackable\n"); - WARN_ONCE(spte & (shadow_acc_track_saved_bits_mask << - shadow_acc_track_saved_bits_shift), + WARN_ONCE(spte & (SHADOW_ACC_TRACK_SAVED_BITS_MASK << + SHADOW_ACC_TRACK_SAVED_BITS_SHIFT), "kvm: Access Tracking saved bit locations are not zero\n"); - spte |= (spte & shadow_acc_track_saved_bits_mask) << - shadow_acc_track_saved_bits_shift; + spte |= (spte & SHADOW_ACC_TRACK_SAVED_BITS_MASK) << + SHADOW_ACC_TRACK_SAVED_BITS_SHIFT; spte &= ~shadow_acc_track_mask; return spte; @@ -245,7 +245,7 @@ u64 mark_spte_for_access_track(u64 spte) void kvm_mmu_set_mmio_spte_mask(u64 mmio_value, u64 access_mask) { BUG_ON((u64)(unsigned)access_mask != access_mask); - WARN_ON(mmio_value & (shadow_nonpresent_or_rsvd_mask << shadow_nonpresent_or_rsvd_mask_len)); + WARN_ON(mmio_value & (shadow_nonpresent_or_rsvd_mask << SHADOW_NONPRESENT_OR_RSVD_MASK_LEN)); WARN_ON(mmio_value & shadow_nonpresent_or_rsvd_lower_gfn_mask); shadow_mmio_value = mmio_value | SPTE_MMIO_MASK; shadow_mmio_access_mask = access_mask; @@ -306,9 +306,9 @@ void kvm_mmu_reset_all_pte_masks(void) low_phys_bits = boot_cpu_data.x86_phys_bits; if (boot_cpu_has_bug(X86_BUG_L1TF) && !WARN_ON_ONCE(boot_cpu_data.x86_cache_bits >= - 52 - shadow_nonpresent_or_rsvd_mask_len)) { + 52 - SHADOW_NONPRESENT_OR_RSVD_MASK_LEN)) { low_phys_bits = boot_cpu_data.x86_cache_bits - - shadow_nonpresent_or_rsvd_mask_len; + - SHADOW_NONPRESENT_OR_RSVD_MASK_LEN; shadow_nonpresent_or_rsvd_mask = rsvd_bits(low_phys_bits, boot_cpu_data.x86_cache_bits - 1); } diff --git a/arch/x86/kvm/mmu/spte.h b/arch/x86/kvm/mmu/spte.h index 4ecf40e0b8fe..5c75a451c000 100644 --- a/arch/x86/kvm/mmu/spte.h +++ b/arch/x86/kvm/mmu/spte.h @@ -105,19 +105,19 @@ extern u64 __read_mostly shadow_acc_track_mask; extern u64 __read_mostly shadow_nonpresent_or_rsvd_mask; /* + * The number of high-order 1 bits to use in the mask above. + */ +#define SHADOW_NONPRESENT_OR_RSVD_MASK_LEN 5 + +/* * The mask/shift to use for saving the original R/X bits when marking the PTE * as not-present for access tracking purposes. We do not save the W bit as the * PTEs being access tracked also need to be dirty tracked, so the W bit will be * restored only when a write is attempted to the page. */ -static const u64 shadow_acc_track_saved_bits_mask = PT64_EPT_READABLE_MASK | - PT64_EPT_EXECUTABLE_MASK; -static const u64 shadow_acc_track_saved_bits_shift = PT64_SECOND_AVAIL_BITS_SHIFT; - -/* - * The number of high-order 1 bits to use in the mask above. - */ -static const u64 shadow_nonpresent_or_rsvd_mask_len = 5; +#define SHADOW_ACC_TRACK_SAVED_BITS_MASK (PT64_EPT_READABLE_MASK | \ + PT64_EPT_EXECUTABLE_MASK) +#define SHADOW_ACC_TRACK_SAVED_BITS_SHIFT PT64_SECOND_AVAIL_BITS_SHIFT /* * In some cases, we need to preserve the GFN of a non-present or reserved diff --git a/arch/x86/kvm/vmx/evmcs.c b/arch/x86/kvm/vmx/evmcs.c index e5325bd0f304..f3199bb02f22 100644 --- a/arch/x86/kvm/vmx/evmcs.c +++ b/arch/x86/kvm/vmx/evmcs.c @@ -297,14 +297,13 @@ const struct evmcs_field vmcs_field_to_evmcs_1[] = { }; const unsigned int nr_evmcs_1_fields = ARRAY_SIZE(vmcs_field_to_evmcs_1); -void evmcs_sanitize_exec_ctrls(struct vmcs_config *vmcs_conf) +__init void evmcs_sanitize_exec_ctrls(struct vmcs_config *vmcs_conf) { vmcs_conf->pin_based_exec_ctrl &= ~EVMCS1_UNSUPPORTED_PINCTRL; vmcs_conf->cpu_based_2nd_exec_ctrl &= ~EVMCS1_UNSUPPORTED_2NDEXEC; vmcs_conf->vmexit_ctrl &= ~EVMCS1_UNSUPPORTED_VMEXIT_CTRL; vmcs_conf->vmentry_ctrl &= ~EVMCS1_UNSUPPORTED_VMENTRY_CTRL; - } #endif diff --git a/arch/x86/kvm/vmx/evmcs.h b/arch/x86/kvm/vmx/evmcs.h index e5f7a7ebf27d..bd41d9462355 100644 --- a/arch/x86/kvm/vmx/evmcs.h +++ b/arch/x86/kvm/vmx/evmcs.h @@ -185,7 +185,7 @@ static inline void evmcs_load(u64 phys_addr) vp_ap->enlighten_vmentry = 1; } -void evmcs_sanitize_exec_ctrls(struct vmcs_config *vmcs_conf); +__init void evmcs_sanitize_exec_ctrls(struct vmcs_config *vmcs_conf); #else /* !IS_ENABLED(CONFIG_HYPERV) */ static inline void evmcs_write64(unsigned long field, u64 value) {} static inline void evmcs_write32(unsigned long field, u32 value) {} @@ -194,7 +194,6 @@ static inline u64 evmcs_read64(unsigned long field) { return 0; } static inline u32 evmcs_read32(unsigned long field) { return 0; } static inline u16 evmcs_read16(unsigned long field) { return 0; } static inline void evmcs_load(u64 phys_addr) {} -static inline void evmcs_sanitize_exec_ctrls(struct vmcs_config *vmcs_conf) {} static inline void evmcs_touch_msr_bitmap(void) {} #endif /* IS_ENABLED(CONFIG_HYPERV) */ diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index d14c94d0aff1..47b8357b9751 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -2560,8 +2560,10 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf, vmcs_conf->vmexit_ctrl = _vmexit_control; vmcs_conf->vmentry_ctrl = _vmentry_control; - if (static_branch_unlikely(&enable_evmcs)) +#if IS_ENABLED(CONFIG_HYPERV) + if (enlightened_vmcs) evmcs_sanitize_exec_ctrls(vmcs_conf); +#endif return 0; } @@ -6834,7 +6836,6 @@ static void vmx_free_vcpu(struct kvm_vcpu *vcpu) static int vmx_create_vcpu(struct kvm_vcpu *vcpu) { struct vcpu_vmx *vmx; - unsigned long *msr_bitmap; int i, cpu, err; BUILD_BUG_ON(offsetof(struct vcpu_vmx, vcpu) != 0); @@ -6894,7 +6895,6 @@ static int vmx_create_vcpu(struct kvm_vcpu *vcpu) bitmap_fill(vmx->shadow_msr_intercept.read, MAX_POSSIBLE_PASSTHROUGH_MSRS); bitmap_fill(vmx->shadow_msr_intercept.write, MAX_POSSIBLE_PASSTHROUGH_MSRS); - msr_bitmap = vmx->vmcs01.msr_bitmap; vmx_disable_intercept_for_msr(vcpu, MSR_IA32_TSC, MSR_TYPE_R); vmx_disable_intercept_for_msr(vcpu, MSR_FS_BASE, MSR_TYPE_RW); vmx_disable_intercept_for_msr(vcpu, MSR_GS_BASE, MSR_TYPE_RW); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 397f599b20e5..f5ede41bf9e6 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -265,13 +265,13 @@ static int kvm_msr_ignored_check(struct kvm_vcpu *vcpu, u32 msr, if (ignore_msrs) { if (report_ignored_msrs) - vcpu_unimpl(vcpu, "ignored %s: 0x%x data 0x%llx\n", - op, msr, data); + kvm_pr_unimpl("ignored %s: 0x%x data 0x%llx\n", + op, msr, data); /* Mask the error */ return 0; } else { - vcpu_debug_ratelimited(vcpu, "unhandled %s: 0x%x data 0x%llx\n", - op, msr, data); + kvm_debug_ratelimited("unhandled %s: 0x%x data 0x%llx\n", + op, msr, data); return -ENOENT; } } diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c index efbb3de472df..bc0833713be9 100644 --- a/arch/x86/mm/mem_encrypt.c +++ b/arch/x86/mm/mem_encrypt.c @@ -39,6 +39,7 @@ */ u64 sme_me_mask __section(".data") = 0; u64 sev_status __section(".data") = 0; +u64 sev_check_data __section(".data") = 0; EXPORT_SYMBOL(sme_me_mask); DEFINE_STATIC_KEY_FALSE(sev_enable_key); EXPORT_SYMBOL_GPL(sev_enable_key); diff --git a/arch/x86/um/stub_segv.c b/arch/x86/um/stub_segv.c index fdcd58af707a..27361cbb7ca9 100644 --- a/arch/x86/um/stub_segv.c +++ b/arch/x86/um/stub_segv.c @@ -8,7 +8,7 @@ #include <sysdep/mcontext.h> #include <sys/ucontext.h> -void __section(".__syscall_stub") +void __attribute__ ((__section__ (".__syscall_stub"))) stub_segv_handler(int sig, siginfo_t *info, void *p) { ucontext_t *uc = p; diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c index c6fc83efee0c..8731b7ad9308 100644 --- a/arch/xtensa/mm/init.c +++ b/arch/xtensa/mm/init.c @@ -89,8 +89,8 @@ static void __init free_highpages(void) /* set highmem page free */ for_each_free_mem_range(i, NUMA_NO_NODE, MEMBLOCK_NONE, &range_start, &range_end, NULL) { - unsigned long start = PHYS_PFN(range_start); - unsigned long end = PHYS_PFN(range_end); + unsigned long start = PFN_UP(range_start); + unsigned long end = PFN_DOWN(range_end); /* Ignore complete lowmem entries */ if (end <= max_low) diff --git a/block/bio.c b/block/bio.c index e6e26d7a1ffb..fa01bef35bb1 100644 --- a/block/bio.c +++ b/block/bio.c @@ -1044,6 +1044,7 @@ static int __bio_iov_append_get_pages(struct bio *bio, struct iov_iter *iter) ssize_t size, left; unsigned len, i; size_t offset; + int ret = 0; if (WARN_ON_ONCE(!max_append_sectors)) return 0; @@ -1066,15 +1067,17 @@ static int __bio_iov_append_get_pages(struct bio *bio, struct iov_iter *iter) len = min_t(size_t, PAGE_SIZE - offset, left); if (bio_add_hw_page(q, bio, page, len, offset, - max_append_sectors, &same_page) != len) - return -EINVAL; + max_append_sectors, &same_page) != len) { + ret = -EINVAL; + break; + } if (same_page) put_page(page); offset = 0; } - iov_iter_advance(iter, size); - return 0; + iov_iter_advance(iter, size - left); + return ret; } /** diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index f9b55614d67d..c68bdf58c9a6 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -657,13 +657,20 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol, goto fail; } + if (radix_tree_preload(GFP_KERNEL)) { + blkg_free(new_blkg); + ret = -ENOMEM; + goto fail; + } + rcu_read_lock(); spin_lock_irq(&q->queue_lock); blkg = blkg_lookup_check(pos, pol, q); if (IS_ERR(blkg)) { ret = PTR_ERR(blkg); - goto fail_unlock; + blkg_free(new_blkg); + goto fail_preloaded; } if (blkg) { @@ -672,10 +679,12 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol, blkg = blkg_create(pos, q, new_blkg); if (IS_ERR(blkg)) { ret = PTR_ERR(blkg); - goto fail_unlock; + goto fail_preloaded; } } + radix_tree_preload_end(); + if (pos == blkcg) goto success; } @@ -685,6 +694,8 @@ success: ctx->body = input; return 0; +fail_preloaded: + radix_tree_preload_end(); fail_unlock: spin_unlock_irq(&q->queue_lock); rcu_read_unlock(); diff --git a/block/blk-flush.c b/block/blk-flush.c index 53abb5c73d99..e32958f0b687 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -225,6 +225,7 @@ static void flush_end_io(struct request *flush_rq, blk_status_t error) /* release the tag's ownership to the req cloned from */ spin_lock_irqsave(&fq->mq_flush_lock, flags); + WRITE_ONCE(flush_rq->state, MQ_RQ_IDLE); if (!refcount_dec_and_test(&flush_rq->ref)) { fq->rq_status = error; spin_unlock_irqrestore(&fq->mq_flush_lock, flags); diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index da4b125ab4c3..0761529cac05 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -74,19 +74,6 @@ MODULE_DEVICE_TABLE(acpi, button_device_ids); /* Please keep this list sorted alphabetically by vendor and model */ static const struct dmi_system_id dmi_lid_quirks[] = { { - /* - * Acer Switch 10 SW5-012. _LID method messes with home and - * power button GPIO IRQ settings causing an interrupt storm on - * both GPIOs. This is unfixable without a DSDT override, so we - * have to disable the lid-switch functionality altogether :| - */ - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Acer"), - DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"), - }, - .driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_DISABLED, - }, - { /* GP-electronic T701, _LID method points to a floating GPIO */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 45d4b7b69de8..24e076f44d23 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -231,7 +231,8 @@ static void hot_remove_dock_devices(struct dock_station *ds) * between them). */ list_for_each_entry_reverse(dd, &ds->dependent_devices, list) - dock_hotplug_event(dd, ACPI_NOTIFY_EJECT_REQUEST, false); + dock_hotplug_event(dd, ACPI_NOTIFY_EJECT_REQUEST, + DOCK_CALL_HANDLER); list_for_each_entry_reverse(dd, &ds->dependent_devices, list) acpi_bus_trim(dd->adev); diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c index 756227837b3b..3a3c209ed3d3 100644 --- a/drivers/acpi/nfit/core.c +++ b/drivers/acpi/nfit/core.c @@ -1564,7 +1564,7 @@ static ssize_t format1_show(struct device *dev, le16_to_cpu(nfit_dcr->dcr->code)); break; } - if (rc != ENXIO) + if (rc != -ENXIO) break; } mutex_unlock(&acpi_desc->init_mutex); diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index eb9dc14e5147..20190f66ced9 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -2100,7 +2100,7 @@ static int nv_swncq_sdbfis(struct ata_port *ap) pp->dhfis_bits &= ~done_mask; pp->dmafis_bits &= ~done_mask; pp->sdbfis_bits |= done_mask; - ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); + ata_qc_complete_multiple(ap, ata_qc_get_active(ap) ^ done_mask); if (!ap->qc_active) { DPRINTK("over\n"); diff --git a/drivers/base/core.c b/drivers/base/core.c index c852f16c111b..d661ada1518f 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -773,8 +773,7 @@ static void __device_link_del(struct kref *kref) dev_dbg(link->consumer, "Dropping the link to %s\n", dev_name(link->supplier)); - if (link->flags & DL_FLAG_PM_RUNTIME) - pm_runtime_drop_link(link->consumer); + pm_runtime_drop_link(link); list_del_rcu(&link->s_node); list_del_rcu(&link->c_node); @@ -788,8 +787,7 @@ static void __device_link_del(struct kref *kref) dev_info(link->consumer, "Dropping the link to %s\n", dev_name(link->supplier)); - if (link->flags & DL_FLAG_PM_RUNTIME) - pm_runtime_drop_link(link->consumer); + pm_runtime_drop_link(link); list_del(&link->s_node); list_del(&link->c_node); @@ -4264,6 +4262,7 @@ static inline bool fwnode_is_primary(struct fwnode_handle *fwnode) */ void set_primary_fwnode(struct device *dev, struct fwnode_handle *fwnode) { + struct device *parent = dev->parent; struct fwnode_handle *fn = dev->fwnode; if (fwnode) { @@ -4278,7 +4277,8 @@ void set_primary_fwnode(struct device *dev, struct fwnode_handle *fwnode) } else { if (fwnode_is_primary(fn)) { dev->fwnode = fn->secondary; - fn->secondary = NULL; + if (!(parent && fn == parent->fwnode)) + fn->secondary = ERR_PTR(-ENODEV); } else { dev->fwnode = NULL; } diff --git a/drivers/base/dd.c b/drivers/base/dd.c index b42229b74fd6..148e81969e04 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -1117,6 +1117,8 @@ static void __device_release_driver(struct device *dev, struct device *parent) drv = dev->driver; if (drv) { + pm_runtime_get_sync(dev); + while (device_links_busy(dev)) { __device_driver_unlock(dev, parent); @@ -1128,13 +1130,12 @@ static void __device_release_driver(struct device *dev, struct device *parent) * have released the driver successfully while this one * was waiting, so check for that. */ - if (dev->driver != drv) + if (dev->driver != drv) { + pm_runtime_put(dev); return; + } } - pm_runtime_get_sync(dev); - pm_runtime_clean_up_links(dev); - driver_sysfs_remove(dev); if (dev->bus) diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 6f605f7820bb..bfda153b1a41 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -1643,42 +1643,6 @@ void pm_runtime_remove(struct device *dev) } /** - * pm_runtime_clean_up_links - Prepare links to consumers for driver removal. - * @dev: Device whose driver is going to be removed. - * - * Check links from this device to any consumers and if any of them have active - * runtime PM references to the device, drop the usage counter of the device - * (as many times as needed). - * - * Links with the DL_FLAG_MANAGED flag unset are ignored. - * - * Since the device is guaranteed to be runtime-active at the point this is - * called, nothing else needs to be done here. - * - * Moreover, this is called after device_links_busy() has returned 'false', so - * the status of each link is guaranteed to be DL_STATE_SUPPLIER_UNBIND and - * therefore rpm_active can't be manipulated concurrently. - */ -void pm_runtime_clean_up_links(struct device *dev) -{ - struct device_link *link; - int idx; - - idx = device_links_read_lock(); - - list_for_each_entry_rcu(link, &dev->links.consumers, s_node, - device_links_read_lock_held()) { - if (!(link->flags & DL_FLAG_MANAGED)) - continue; - - while (refcount_dec_not_one(&link->rpm_active)) - pm_runtime_put_noidle(dev); - } - - device_links_read_unlock(idx); -} - -/** * pm_runtime_get_suppliers - Resume and reference-count supplier devices. * @dev: Consumer device. */ @@ -1729,7 +1693,7 @@ void pm_runtime_new_link(struct device *dev) spin_unlock_irq(&dev->power.lock); } -void pm_runtime_drop_link(struct device *dev) +static void pm_runtime_drop_link_count(struct device *dev) { spin_lock_irq(&dev->power.lock); WARN_ON(dev->power.links_count == 0); @@ -1737,6 +1701,25 @@ void pm_runtime_drop_link(struct device *dev) spin_unlock_irq(&dev->power.lock); } +/** + * pm_runtime_drop_link - Prepare for device link removal. + * @link: Device link going away. + * + * Drop the link count of the consumer end of @link and decrement the supplier + * device's runtime PM usage counter as many times as needed to drop all of the + * PM runtime reference to it from the consumer. + */ +void pm_runtime_drop_link(struct device_link *link) +{ + if (!(link->flags & DL_FLAG_PM_RUNTIME)) + return; + + pm_runtime_drop_link_count(link->consumer); + + while (refcount_dec_not_one(&link->rpm_active)) + pm_runtime_put(link->supplier); +} + static bool pm_runtime_need_not_resume(struct device *dev) { return atomic_read(&dev->power.usage_count) <= 1 && diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 0bed21c0c81b..c4f9ccf5cc2a 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -296,7 +296,7 @@ static void nbd_size_clear(struct nbd_device *nbd) } } -static void nbd_size_update(struct nbd_device *nbd) +static void nbd_size_update(struct nbd_device *nbd, bool start) { struct nbd_config *config = nbd->config; struct block_device *bdev = bdget_disk(nbd->disk, 0); @@ -313,7 +313,8 @@ static void nbd_size_update(struct nbd_device *nbd) if (bdev) { if (bdev->bd_disk) { bd_set_nr_sectors(bdev, nr_sectors); - set_blocksize(bdev, config->blksize); + if (start) + set_blocksize(bdev, config->blksize); } else set_bit(GD_NEED_PART_SCAN, &nbd->disk->state); bdput(bdev); @@ -328,7 +329,7 @@ static void nbd_size_set(struct nbd_device *nbd, loff_t blocksize, config->blksize = blocksize; config->bytesize = blocksize * nr_blocks; if (nbd->task_recv != NULL) - nbd_size_update(nbd); + nbd_size_update(nbd, false); } static void nbd_complete_rq(struct request *req) @@ -1308,7 +1309,7 @@ static int nbd_start_device(struct nbd_device *nbd) args->index = i; queue_work(nbd->recv_workq, &args->work); } - nbd_size_update(nbd); + nbd_size_update(nbd, true); return error; } diff --git a/drivers/block/null_blk.h b/drivers/block/null_blk.h index d2e7db43a52a..cfd00ad40355 100644 --- a/drivers/block/null_blk.h +++ b/drivers/block/null_blk.h @@ -47,6 +47,8 @@ struct nullb_device { unsigned int nr_zones_closed; struct blk_zone *zones; sector_t zone_size_sects; + spinlock_t zone_dev_lock; + unsigned long *zone_locks; unsigned long size; /* device size in MB */ unsigned long completion_nsec; /* time in ns to complete a request */ diff --git a/drivers/block/null_blk_zoned.c b/drivers/block/null_blk_zoned.c index 7d94f2d47a6a..8775acbb4f8f 100644 --- a/drivers/block/null_blk_zoned.c +++ b/drivers/block/null_blk_zoned.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/vmalloc.h> +#include <linux/bitmap.h> #include "null_blk.h" #define CREATE_TRACE_POINTS @@ -45,6 +46,13 @@ int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q) if (!dev->zones) return -ENOMEM; + spin_lock_init(&dev->zone_dev_lock); + dev->zone_locks = bitmap_zalloc(dev->nr_zones, GFP_KERNEL); + if (!dev->zone_locks) { + kvfree(dev->zones); + return -ENOMEM; + } + if (dev->zone_nr_conv >= dev->nr_zones) { dev->zone_nr_conv = dev->nr_zones - 1; pr_info("changed the number of conventional zones to %u", @@ -123,15 +131,26 @@ int null_register_zoned_dev(struct nullb *nullb) void null_free_zoned_dev(struct nullb_device *dev) { + bitmap_free(dev->zone_locks); kvfree(dev->zones); } +static inline void null_lock_zone(struct nullb_device *dev, unsigned int zno) +{ + wait_on_bit_lock_io(dev->zone_locks, zno, TASK_UNINTERRUPTIBLE); +} + +static inline void null_unlock_zone(struct nullb_device *dev, unsigned int zno) +{ + clear_and_wake_up_bit(zno, dev->zone_locks); +} + int null_report_zones(struct gendisk *disk, sector_t sector, unsigned int nr_zones, report_zones_cb cb, void *data) { struct nullb *nullb = disk->private_data; struct nullb_device *dev = nullb->dev; - unsigned int first_zone, i; + unsigned int first_zone, i, zno; struct blk_zone zone; int error; @@ -142,15 +161,18 @@ int null_report_zones(struct gendisk *disk, sector_t sector, nr_zones = min(nr_zones, dev->nr_zones - first_zone); trace_nullb_report_zones(nullb, nr_zones); - for (i = 0; i < nr_zones; i++) { + zno = first_zone; + for (i = 0; i < nr_zones; i++, zno++) { /* * Stacked DM target drivers will remap the zone information by * modifying the zone information passed to the report callback. * So use a local copy to avoid corruption of the device zone * array. */ - memcpy(&zone, &dev->zones[first_zone + i], - sizeof(struct blk_zone)); + null_lock_zone(dev, zno); + memcpy(&zone, &dev->zones[zno], sizeof(struct blk_zone)); + null_unlock_zone(dev, zno); + error = cb(&zone, i, data); if (error) return error; @@ -159,6 +181,10 @@ int null_report_zones(struct gendisk *disk, sector_t sector, return nr_zones; } +/* + * This is called in the case of memory backing from null_process_cmd() + * with the target zone already locked. + */ size_t null_zone_valid_read_len(struct nullb *nullb, sector_t sector, unsigned int len) { @@ -295,22 +321,27 @@ static blk_status_t null_zone_write(struct nullb_cmd *cmd, sector_t sector, if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL) return null_process_cmd(cmd, REQ_OP_WRITE, sector, nr_sectors); + null_lock_zone(dev, zno); + spin_lock(&dev->zone_dev_lock); + switch (zone->cond) { case BLK_ZONE_COND_FULL: /* Cannot write to a full zone */ - return BLK_STS_IOERR; + ret = BLK_STS_IOERR; + goto unlock; case BLK_ZONE_COND_EMPTY: case BLK_ZONE_COND_CLOSED: ret = null_check_zone_resources(dev, zone); if (ret != BLK_STS_OK) - return ret; + goto unlock; break; case BLK_ZONE_COND_IMP_OPEN: case BLK_ZONE_COND_EXP_OPEN: break; default: /* Invalid zone condition */ - return BLK_STS_IOERR; + ret = BLK_STS_IOERR; + goto unlock; } /* @@ -326,11 +357,14 @@ static blk_status_t null_zone_write(struct nullb_cmd *cmd, sector_t sector, else cmd->rq->__sector = sector; } else if (sector != zone->wp) { - return BLK_STS_IOERR; + ret = BLK_STS_IOERR; + goto unlock; } - if (zone->wp + nr_sectors > zone->start + zone->capacity) - return BLK_STS_IOERR; + if (zone->wp + nr_sectors > zone->start + zone->capacity) { + ret = BLK_STS_IOERR; + goto unlock; + } if (zone->cond == BLK_ZONE_COND_CLOSED) { dev->nr_zones_closed--; @@ -341,9 +375,11 @@ static blk_status_t null_zone_write(struct nullb_cmd *cmd, sector_t sector, if (zone->cond != BLK_ZONE_COND_EXP_OPEN) zone->cond = BLK_ZONE_COND_IMP_OPEN; + spin_unlock(&dev->zone_dev_lock); ret = null_process_cmd(cmd, REQ_OP_WRITE, sector, nr_sectors); + spin_lock(&dev->zone_dev_lock); if (ret != BLK_STS_OK) - return ret; + goto unlock; zone->wp += nr_sectors; if (zone->wp == zone->start + zone->capacity) { @@ -353,7 +389,13 @@ static blk_status_t null_zone_write(struct nullb_cmd *cmd, sector_t sector, dev->nr_zones_imp_open--; zone->cond = BLK_ZONE_COND_FULL; } - return BLK_STS_OK; + ret = BLK_STS_OK; + +unlock: + spin_unlock(&dev->zone_dev_lock); + null_unlock_zone(dev, zno); + + return ret; } static blk_status_t null_open_zone(struct nullb_device *dev, struct blk_zone *zone) @@ -464,16 +506,33 @@ static blk_status_t null_zone_mgmt(struct nullb_cmd *cmd, enum req_opf op, sector_t sector) { struct nullb_device *dev = cmd->nq->dev; - unsigned int zone_no = null_zone_no(dev, sector); - struct blk_zone *zone = &dev->zones[zone_no]; - blk_status_t ret = BLK_STS_OK; + unsigned int zone_no; + struct blk_zone *zone; + blk_status_t ret; size_t i; + if (op == REQ_OP_ZONE_RESET_ALL) { + for (i = dev->zone_nr_conv; i < dev->nr_zones; i++) { + null_lock_zone(dev, i); + zone = &dev->zones[i]; + if (zone->cond != BLK_ZONE_COND_EMPTY) { + spin_lock(&dev->zone_dev_lock); + null_reset_zone(dev, zone); + spin_unlock(&dev->zone_dev_lock); + trace_nullb_zone_op(cmd, i, zone->cond); + } + null_unlock_zone(dev, i); + } + return BLK_STS_OK; + } + + zone_no = null_zone_no(dev, sector); + zone = &dev->zones[zone_no]; + + null_lock_zone(dev, zone_no); + spin_lock(&dev->zone_dev_lock); + switch (op) { - case REQ_OP_ZONE_RESET_ALL: - for (i = dev->zone_nr_conv; i < dev->nr_zones; i++) - null_reset_zone(dev, &dev->zones[i]); - break; case REQ_OP_ZONE_RESET: ret = null_reset_zone(dev, zone); break; @@ -487,30 +546,46 @@ static blk_status_t null_zone_mgmt(struct nullb_cmd *cmd, enum req_opf op, ret = null_finish_zone(dev, zone); break; default: - return BLK_STS_NOTSUPP; + ret = BLK_STS_NOTSUPP; + break; } + spin_unlock(&dev->zone_dev_lock); + if (ret == BLK_STS_OK) trace_nullb_zone_op(cmd, zone_no, zone->cond); + null_unlock_zone(dev, zone_no); + return ret; } blk_status_t null_process_zoned_cmd(struct nullb_cmd *cmd, enum req_opf op, sector_t sector, sector_t nr_sectors) { + struct nullb_device *dev = cmd->nq->dev; + unsigned int zno = null_zone_no(dev, sector); + blk_status_t sts; + switch (op) { case REQ_OP_WRITE: - return null_zone_write(cmd, sector, nr_sectors, false); + sts = null_zone_write(cmd, sector, nr_sectors, false); + break; case REQ_OP_ZONE_APPEND: - return null_zone_write(cmd, sector, nr_sectors, true); + sts = null_zone_write(cmd, sector, nr_sectors, true); + break; case REQ_OP_ZONE_RESET: case REQ_OP_ZONE_RESET_ALL: case REQ_OP_ZONE_OPEN: case REQ_OP_ZONE_CLOSE: case REQ_OP_ZONE_FINISH: - return null_zone_mgmt(cmd, op, sector); + sts = null_zone_mgmt(cmd, op, sector); + break; default: - return null_process_cmd(cmd, op, sector, nr_sectors); + null_lock_zone(dev, zno); + sts = null_process_cmd(cmd, op, sector, nr_sectors); + null_unlock_zone(dev, zno); } + + return sts; } diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index 8d581c7536fb..eb8ef65778c3 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -443,22 +443,27 @@ static void ace_fix_driveid(u16 *id) #define ACE_FSM_NUM_STATES 11 /* Set flag to exit FSM loop and reschedule tasklet */ -static inline void ace_fsm_yield(struct ace_device *ace) +static inline void ace_fsm_yieldpoll(struct ace_device *ace) { - dev_dbg(ace->dev, "ace_fsm_yield()\n"); tasklet_schedule(&ace->fsm_tasklet); ace->fsm_continue_flag = 0; } +static inline void ace_fsm_yield(struct ace_device *ace) +{ + dev_dbg(ace->dev, "%s()\n", __func__); + ace_fsm_yieldpoll(ace); +} + /* Set flag to exit FSM loop and wait for IRQ to reschedule tasklet */ static inline void ace_fsm_yieldirq(struct ace_device *ace) { dev_dbg(ace->dev, "ace_fsm_yieldirq()\n"); - if (!ace->irq) - /* No IRQ assigned, so need to poll */ - tasklet_schedule(&ace->fsm_tasklet); - ace->fsm_continue_flag = 0; + if (ace->irq > 0) + ace->fsm_continue_flag = 0; + else + ace_fsm_yieldpoll(ace); } static bool ace_has_next_request(struct request_queue *q) @@ -1053,12 +1058,12 @@ static int ace_setup(struct ace_device *ace) ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ); /* Now we can hook up the irq handler */ - if (ace->irq) { + if (ace->irq > 0) { rc = request_irq(ace->irq, ace_interrupt, 0, "systemace", ace); if (rc) { /* Failure - fall back to polled mode */ dev_err(ace->dev, "request_irq failed\n"); - ace->irq = 0; + ace->irq = rc; } } @@ -1110,7 +1115,7 @@ static void ace_teardown(struct ace_device *ace) tasklet_kill(&ace->fsm_tasklet); - if (ace->irq) + if (ace->irq > 0) free_irq(ace->irq, ace); iounmap(ace->baseaddr); @@ -1123,11 +1128,6 @@ static int ace_alloc(struct device *dev, int id, resource_size_t physaddr, int rc; dev_dbg(dev, "ace_alloc(%p)\n", dev); - if (!physaddr) { - rc = -ENODEV; - goto err_noreg; - } - /* Allocate and initialize the ace device structure */ ace = kzalloc(sizeof(struct ace_device), GFP_KERNEL); if (!ace) { @@ -1153,7 +1153,6 @@ err_setup: dev_set_drvdata(dev, NULL); kfree(ace); err_alloc: -err_noreg: dev_err(dev, "could not initialize device, err=%i\n", rc); return rc; } @@ -1176,10 +1175,11 @@ static void ace_free(struct device *dev) static int ace_probe(struct platform_device *dev) { - resource_size_t physaddr = 0; int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */ + resource_size_t physaddr; + struct resource *res; u32 id = dev->id; - int irq = 0; + int irq; int i; dev_dbg(&dev->dev, "ace_probe(%p)\n", dev); @@ -1190,12 +1190,15 @@ static int ace_probe(struct platform_device *dev) if (of_find_property(dev->dev.of_node, "8-bit", NULL)) bus_width = ACE_BUS_WIDTH_8; - for (i = 0; i < dev->num_resources; i++) { - if (dev->resource[i].flags & IORESOURCE_MEM) - physaddr = dev->resource[i].start; - if (dev->resource[i].flags & IORESOURCE_IRQ) - irq = dev->resource[i].start; - } + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + physaddr = res->start; + if (!physaddr) + return -ENODEV; + + irq = platform_get_irq_optional(dev, 0); /* Call the bus-independent setup code */ return ace_alloc(&dev->dev, id, physaddr, irq, bus_width); diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h index 09346ae308eb..78cc64b42b30 100644 --- a/drivers/bluetooth/btintel.h +++ b/drivers/bluetooth/btintel.h @@ -47,7 +47,7 @@ enum { struct intel_tlv { u8 type; u8 len; - u8 val[0]; + u8 val[]; } __packed; struct intel_version_tlv { diff --git a/drivers/char/tpm/eventlog/efi.c b/drivers/char/tpm/eventlog/efi.c index 6bb023de17f1..35229e5143ca 100644 --- a/drivers/char/tpm/eventlog/efi.c +++ b/drivers/char/tpm/eventlog/efi.c @@ -41,6 +41,11 @@ int tpm_read_log_efi(struct tpm_chip *chip) log_size = log_tbl->size; memunmap(log_tbl); + if (!log_size) { + pr_warn("UEFI TPM log area empty\n"); + return -EIO; + } + log_tbl = memremap(efi.tpm_log, sizeof(*log_tbl) + log_size, MEMREMAP_WB); if (!log_tbl) { diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 0b214963539d..4ed6e660273a 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -27,6 +27,7 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/kernel.h> +#include <linux/dmi.h> #include "tpm.h" #include "tpm_tis_core.h" @@ -49,8 +50,8 @@ static inline struct tpm_tis_tcg_phy *to_tpm_tis_tcg_phy(struct tpm_tis_data *da return container_of(data, struct tpm_tis_tcg_phy, priv); } -static bool interrupts = true; -module_param(interrupts, bool, 0444); +static int interrupts = -1; +module_param(interrupts, int, 0444); MODULE_PARM_DESC(interrupts, "Enable interrupts"); static bool itpm; @@ -63,6 +64,28 @@ module_param(force, bool, 0444); MODULE_PARM_DESC(force, "Force device probe rather than using ACPI entry"); #endif +static int tpm_tis_disable_irq(const struct dmi_system_id *d) +{ + if (interrupts == -1) { + pr_notice("tpm_tis: %s detected: disabling interrupts.\n", d->ident); + interrupts = 0; + } + + return 0; +} + +static const struct dmi_system_id tpm_tis_dmi_table[] = { + { + .callback = tpm_tis_disable_irq, + .ident = "ThinkPad T490s", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T490s"), + }, + }, + {} +}; + #if defined(CONFIG_PNP) && defined(CONFIG_ACPI) static int has_hid(struct acpi_device *dev, const char *hid) { @@ -192,6 +215,8 @@ static int tpm_tis_init(struct device *dev, struct tpm_info *tpm_info) int irq = -1; int rc; + dmi_check_system(tpm_tis_dmi_table); + rc = check_acpi_tpm2(dev); if (rc) return rc; diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index 2c7171e0b001..85de313ddec2 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -71,6 +71,7 @@ config CPU_FREQ_DEFAULT_GOV_USERSPACE config CPU_FREQ_DEFAULT_GOV_ONDEMAND bool "ondemand" + depends on !(X86_INTEL_PSTATE && SMP) select CPU_FREQ_GOV_ONDEMAND select CPU_FREQ_GOV_PERFORMANCE help @@ -83,6 +84,7 @@ config CPU_FREQ_DEFAULT_GOV_ONDEMAND config CPU_FREQ_DEFAULT_GOV_CONSERVATIVE bool "conservative" + depends on !(X86_INTEL_PSTATE && SMP) select CPU_FREQ_GOV_CONSERVATIVE select CPU_FREQ_GOV_PERFORMANCE help diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index f4b60663efe6..336b5e94cbc8 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1908,6 +1908,18 @@ void cpufreq_resume(void) } /** + * cpufreq_driver_test_flags - Test cpufreq driver's flags against given ones. + * @flags: Flags to test against the current cpufreq driver's flags. + * + * Assumes that the driver is there, so callers must ensure that this is the + * case. + */ +bool cpufreq_driver_test_flags(u16 flags) +{ + return !!(cpufreq_driver->flags & flags); +} + +/** * cpufreq_get_current_driver - return current driver's name * * Return the name string of the currently loaded cpufreq driver @@ -2187,7 +2199,8 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy, * exactly same freq is called again and so we can save on few function * calls. */ - if (target_freq == policy->cur) + if (target_freq == policy->cur && + !(cpufreq_driver->flags & CPUFREQ_NEED_UPDATE_LIMITS)) return 0; /* Save last value to restore later on errors */ diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c index 776a58bab0ff..ab93bce8ae77 100644 --- a/drivers/cpufreq/e_powersaver.c +++ b/drivers/cpufreq/e_powersaver.c @@ -223,7 +223,6 @@ static int eps_cpu_init(struct cpufreq_policy *policy) case EPS_BRAND_C3: pr_cont("C3\n"); return -ENODEV; - break; } /* Enable Enhanced PowerSaver */ rdmsrl(MSR_IA32_MISC_ENABLE, val); diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 3c1455518738..b7a9779250aa 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -2568,14 +2568,12 @@ static int intel_cpufreq_update_pstate(struct cpudata *cpu, int target_pstate, int old_pstate = cpu->pstate.current_pstate; target_pstate = intel_pstate_prepare_request(cpu, target_pstate); - if (target_pstate != old_pstate) { + if (hwp_active) { + intel_cpufreq_adjust_hwp(cpu, target_pstate, fast_switch); + cpu->pstate.current_pstate = target_pstate; + } else if (target_pstate != old_pstate) { + intel_cpufreq_adjust_perf_ctl(cpu, target_pstate, fast_switch); cpu->pstate.current_pstate = target_pstate; - if (hwp_active) - intel_cpufreq_adjust_hwp(cpu, target_pstate, - fast_switch); - else - intel_cpufreq_adjust_perf_ctl(cpu, target_pstate, - fast_switch); } intel_cpufreq_trace(cpu, fast_switch ? INTEL_PSTATE_TRACE_FAST_SWITCH : @@ -3032,6 +3030,7 @@ static int __init intel_pstate_init(void) hwp_mode_bdw = id->driver_data; intel_pstate.attr = hwp_cpufreq_attrs; intel_cpufreq.attr = hwp_cpufreq_attrs; + intel_cpufreq.flags |= CPUFREQ_NEED_UPDATE_LIMITS; if (!default_driver) default_driver = &intel_pstate; diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c index 123fb006810d..182a4dbca095 100644 --- a/drivers/cpufreq/longhaul.c +++ b/drivers/cpufreq/longhaul.c @@ -593,7 +593,6 @@ static void longhaul_setup_voltagescaling(void) break; default: return; - break; } if (min_vid_speed >= highest_speed) return; diff --git a/drivers/cpufreq/speedstep-lib.c b/drivers/cpufreq/speedstep-lib.c index a13a2d1e444e..0b66df4ed513 100644 --- a/drivers/cpufreq/speedstep-lib.c +++ b/drivers/cpufreq/speedstep-lib.c @@ -240,7 +240,7 @@ unsigned int speedstep_get_frequency(enum speedstep_processor processor) return pentium3_get_frequency(processor); default: return 0; - }; + } return 0; } EXPORT_SYMBOL_GPL(speedstep_get_frequency); diff --git a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c index fa2f1b4fad7b..a94bf28f858a 100644 --- a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c +++ b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c @@ -7,7 +7,7 @@ * * This file add support for MD5 and SHA1/SHA224/SHA256/SHA384/SHA512. * - * You could find the datasheet in Documentation/arm/sunxi/README + * You could find the datasheet in Documentation/arm/sunxi.rst */ #include <linux/dma-mapping.h> #include <linux/pm_runtime.h> diff --git a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-prng.c b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-prng.c index 78503006949c..cfde9ee4356b 100644 --- a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-prng.c +++ b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-prng.c @@ -7,7 +7,7 @@ * * This file handle the PRNG * - * You could find a link for the datasheet in Documentation/arm/sunxi/README + * You could find a link for the datasheet in Documentation/arm/sunxi.rst */ #include "sun8i-ce.h" #include <linux/dma-mapping.h> diff --git a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-trng.c b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-trng.c index 654328160d19..5b7af4498bd5 100644 --- a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-trng.c +++ b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-trng.c @@ -7,7 +7,7 @@ * * This file handle the TRNG * - * You could find a link for the datasheet in Documentation/arm/sunxi/README + * You could find a link for the datasheet in Documentation/arm/sunxi.rst */ #include "sun8i-ce.h" #include <linux/dma-mapping.h> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 518a1437862a..90284ffda58a 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -318,24 +318,6 @@ config INTEL_IOP_ADMA help Enable support for the Intel(R) IOP Series RAID engines. -config INTEL_MIC_X100_DMA - tristate "Intel MIC X100 DMA Driver" - depends on 64BIT && X86 && INTEL_MIC_BUS - select DMA_ENGINE - help - This enables DMA support for the Intel Many Integrated Core - (MIC) family of PCIe form factor coprocessor X100 devices that - run a 64 bit Linux OS. This driver will be used by both MIC - host and card drivers. - - If you are building host kernel with a MIC device or a card - kernel for a MIC device, then say M (recommended) or Y, else - say N. If unsure say N. - - More information about the Intel MIC family as well as the Linux - OS and tools for MIC to use with this driver are available from - <http://software.intel.com/en-us/mic-developer>. - config K3_DMA tristate "Hisilicon K3 DMA support" depends on ARCH_HI3xxx || ARCH_HISI || COMPILE_TEST diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index e60f81331d4c..948a8da05f8b 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -44,7 +44,6 @@ obj-$(CONFIG_INTEL_IDMA64) += idma64.o obj-$(CONFIG_INTEL_IOATDMA) += ioat/ obj-$(CONFIG_INTEL_IDXD) += idxd/ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o -obj-$(CONFIG_INTEL_MIC_X100_DMA) += mic_x100_dma.o obj-$(CONFIG_K3_DMA) += k3dma.o obj-$(CONFIG_LPC18XX_DMAMUX) += lpc18xx-dmamux.o obj-$(CONFIG_MILBEAUT_HDMAC) += milbeaut-hdmac.o diff --git a/drivers/dma/mic_x100_dma.c b/drivers/dma/mic_x100_dma.c deleted file mode 100644 index fea8608a7810..000000000000 --- a/drivers/dma/mic_x100_dma.c +++ /dev/null @@ -1,770 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel MIC X100 DMA Driver. - * - * Adapted from IOAT dma driver. - */ -#include <linux/module.h> -#include <linux/io.h> -#include <linux/seq_file.h> -#include <linux/vmalloc.h> - -#include "mic_x100_dma.h" - -#define MIC_DMA_MAX_XFER_SIZE_CARD (1 * 1024 * 1024 -\ - MIC_DMA_ALIGN_BYTES) -#define MIC_DMA_MAX_XFER_SIZE_HOST (1 * 1024 * 1024 >> 1) -#define MIC_DMA_DESC_TYPE_SHIFT 60 -#define MIC_DMA_MEMCPY_LEN_SHIFT 46 -#define MIC_DMA_STAT_INTR_SHIFT 59 - -/* high-water mark for pushing dma descriptors */ -static int mic_dma_pending_level = 4; - -/* Status descriptor is used to write a 64 bit value to a memory location */ -enum mic_dma_desc_format_type { - MIC_DMA_MEMCPY = 1, - MIC_DMA_STATUS, -}; - -static inline u32 mic_dma_hw_ring_inc(u32 val) -{ - return (val + 1) % MIC_DMA_DESC_RX_SIZE; -} - -static inline u32 mic_dma_hw_ring_dec(u32 val) -{ - return val ? val - 1 : MIC_DMA_DESC_RX_SIZE - 1; -} - -static inline void mic_dma_hw_ring_inc_head(struct mic_dma_chan *ch) -{ - ch->head = mic_dma_hw_ring_inc(ch->head); -} - -/* Prepare a memcpy desc */ -static inline void mic_dma_memcpy_desc(struct mic_dma_desc *desc, - dma_addr_t src_phys, dma_addr_t dst_phys, u64 size) -{ - u64 qw0, qw1; - - qw0 = src_phys; - qw0 |= (size >> MIC_DMA_ALIGN_SHIFT) << MIC_DMA_MEMCPY_LEN_SHIFT; - qw1 = MIC_DMA_MEMCPY; - qw1 <<= MIC_DMA_DESC_TYPE_SHIFT; - qw1 |= dst_phys; - desc->qw0 = qw0; - desc->qw1 = qw1; -} - -/* Prepare a status desc. with @data to be written at @dst_phys */ -static inline void mic_dma_prep_status_desc(struct mic_dma_desc *desc, u64 data, - dma_addr_t dst_phys, bool generate_intr) -{ - u64 qw0, qw1; - - qw0 = data; - qw1 = (u64) MIC_DMA_STATUS << MIC_DMA_DESC_TYPE_SHIFT | dst_phys; - if (generate_intr) - qw1 |= (1ULL << MIC_DMA_STAT_INTR_SHIFT); - desc->qw0 = qw0; - desc->qw1 = qw1; -} - -static void mic_dma_cleanup(struct mic_dma_chan *ch) -{ - struct dma_async_tx_descriptor *tx; - u32 tail; - u32 last_tail; - - spin_lock(&ch->cleanup_lock); - tail = mic_dma_read_cmp_cnt(ch); - /* - * This is the barrier pair for smp_wmb() in fn. - * mic_dma_tx_submit_unlock. It's required so that we read the - * updated cookie value from tx->cookie. - */ - smp_rmb(); - for (last_tail = ch->last_tail; tail != last_tail;) { - tx = &ch->tx_array[last_tail]; - if (tx->cookie) { - dma_cookie_complete(tx); - dmaengine_desc_get_callback_invoke(tx, NULL); - tx->callback = NULL; - } - last_tail = mic_dma_hw_ring_inc(last_tail); - } - /* finish all completion callbacks before incrementing tail */ - smp_mb(); - ch->last_tail = last_tail; - spin_unlock(&ch->cleanup_lock); -} - -static u32 mic_dma_ring_count(u32 head, u32 tail) -{ - u32 count; - - if (head >= tail) - count = (tail - 0) + (MIC_DMA_DESC_RX_SIZE - head); - else - count = tail - head; - return count - 1; -} - -/* Returns the num. of free descriptors on success, -ENOMEM on failure */ -static int mic_dma_avail_desc_ring_space(struct mic_dma_chan *ch, int required) -{ - struct device *dev = mic_dma_ch_to_device(ch); - u32 count; - - count = mic_dma_ring_count(ch->head, ch->last_tail); - if (count < required) { - mic_dma_cleanup(ch); - count = mic_dma_ring_count(ch->head, ch->last_tail); - } - - if (count < required) { - dev_dbg(dev, "Not enough desc space"); - dev_dbg(dev, "%s %d required=%u, avail=%u\n", - __func__, __LINE__, required, count); - return -ENOMEM; - } else { - return count; - } -} - -/* Program memcpy descriptors into the descriptor ring and update s/w head ptr*/ -static int mic_dma_prog_memcpy_desc(struct mic_dma_chan *ch, dma_addr_t src, - dma_addr_t dst, size_t len) -{ - size_t current_transfer_len; - size_t max_xfer_size = to_mic_dma_dev(ch)->max_xfer_size; - /* 3 is added to make sure we have enough space for status desc */ - int num_desc = len / max_xfer_size + 3; - int ret; - - if (len % max_xfer_size) - num_desc++; - - ret = mic_dma_avail_desc_ring_space(ch, num_desc); - if (ret < 0) - return ret; - do { - current_transfer_len = min(len, max_xfer_size); - mic_dma_memcpy_desc(&ch->desc_ring[ch->head], - src, dst, current_transfer_len); - mic_dma_hw_ring_inc_head(ch); - len -= current_transfer_len; - dst = dst + current_transfer_len; - src = src + current_transfer_len; - } while (len > 0); - return 0; -} - -/* It's a h/w quirk and h/w needs 2 status descriptors for every status desc */ -static void mic_dma_prog_intr(struct mic_dma_chan *ch) -{ - mic_dma_prep_status_desc(&ch->desc_ring[ch->head], 0, - ch->status_dest_micpa, false); - mic_dma_hw_ring_inc_head(ch); - mic_dma_prep_status_desc(&ch->desc_ring[ch->head], 0, - ch->status_dest_micpa, true); - mic_dma_hw_ring_inc_head(ch); -} - -/* Wrapper function to program memcpy descriptors/status descriptors */ -static int mic_dma_do_dma(struct mic_dma_chan *ch, int flags, dma_addr_t src, - dma_addr_t dst, size_t len) -{ - if (len && -ENOMEM == mic_dma_prog_memcpy_desc(ch, src, dst, len)) { - return -ENOMEM; - } else { - /* 3 is the maximum number of status descriptors */ - int ret = mic_dma_avail_desc_ring_space(ch, 3); - - if (ret < 0) - return ret; - } - - /* Above mic_dma_prog_memcpy_desc() makes sure we have enough space */ - if (flags & DMA_PREP_FENCE) { - mic_dma_prep_status_desc(&ch->desc_ring[ch->head], 0, - ch->status_dest_micpa, false); - mic_dma_hw_ring_inc_head(ch); - } - - if (flags & DMA_PREP_INTERRUPT) - mic_dma_prog_intr(ch); - - return 0; -} - -static inline void mic_dma_issue_pending(struct dma_chan *ch) -{ - struct mic_dma_chan *mic_ch = to_mic_dma_chan(ch); - - spin_lock(&mic_ch->issue_lock); - /* - * Write to head triggers h/w to act on the descriptors. - * On MIC, writing the same head value twice causes - * a h/w error. On second write, h/w assumes we filled - * the entire ring & overwrote some of the descriptors. - */ - if (mic_ch->issued == mic_ch->submitted) - goto out; - mic_ch->issued = mic_ch->submitted; - /* - * make descriptor updates visible before advancing head, - * this is purposefully not smp_wmb() since we are also - * publishing the descriptor updates to a dma device - */ - wmb(); - mic_dma_write_reg(mic_ch, MIC_DMA_REG_DHPR, mic_ch->issued); -out: - spin_unlock(&mic_ch->issue_lock); -} - -static inline void mic_dma_update_pending(struct mic_dma_chan *ch) -{ - if (mic_dma_ring_count(ch->issued, ch->submitted) - > mic_dma_pending_level) - mic_dma_issue_pending(&ch->api_ch); -} - -static dma_cookie_t mic_dma_tx_submit_unlock(struct dma_async_tx_descriptor *tx) -{ - struct mic_dma_chan *mic_ch = to_mic_dma_chan(tx->chan); - dma_cookie_t cookie; - - dma_cookie_assign(tx); - cookie = tx->cookie; - /* - * We need an smp write barrier here because another CPU might see - * an update to submitted and update h/w head even before we - * assigned a cookie to this tx. - */ - smp_wmb(); - mic_ch->submitted = mic_ch->head; - spin_unlock(&mic_ch->prep_lock); - mic_dma_update_pending(mic_ch); - return cookie; -} - -static inline struct dma_async_tx_descriptor * -allocate_tx(struct mic_dma_chan *ch) -{ - u32 idx = mic_dma_hw_ring_dec(ch->head); - struct dma_async_tx_descriptor *tx = &ch->tx_array[idx]; - - dma_async_tx_descriptor_init(tx, &ch->api_ch); - tx->tx_submit = mic_dma_tx_submit_unlock; - return tx; -} - -/* Program a status descriptor with dst as address and value to be written */ -static struct dma_async_tx_descriptor * -mic_dma_prep_status_lock(struct dma_chan *ch, dma_addr_t dst, u64 src_val, - unsigned long flags) -{ - struct mic_dma_chan *mic_ch = to_mic_dma_chan(ch); - int result; - - spin_lock(&mic_ch->prep_lock); - result = mic_dma_avail_desc_ring_space(mic_ch, 4); - if (result < 0) - goto error; - mic_dma_prep_status_desc(&mic_ch->desc_ring[mic_ch->head], src_val, dst, - false); - mic_dma_hw_ring_inc_head(mic_ch); - result = mic_dma_do_dma(mic_ch, flags, 0, 0, 0); - if (result < 0) - goto error; - - return allocate_tx(mic_ch); -error: - dev_err(mic_dma_ch_to_device(mic_ch), - "Error enqueueing dma status descriptor, error=%d\n", result); - spin_unlock(&mic_ch->prep_lock); - return NULL; -} - -/* - * Prepare a memcpy descriptor to be added to the ring. - * Note that the temporary descriptor adds an extra overhead of copying the - * descriptor to ring. So, we copy directly to the descriptor ring - */ -static struct dma_async_tx_descriptor * -mic_dma_prep_memcpy_lock(struct dma_chan *ch, dma_addr_t dma_dest, - dma_addr_t dma_src, size_t len, unsigned long flags) -{ - struct mic_dma_chan *mic_ch = to_mic_dma_chan(ch); - struct device *dev = mic_dma_ch_to_device(mic_ch); - int result; - - if (!len && !flags) - return NULL; - - spin_lock(&mic_ch->prep_lock); - result = mic_dma_do_dma(mic_ch, flags, dma_src, dma_dest, len); - if (result >= 0) - return allocate_tx(mic_ch); - dev_err(dev, "Error enqueueing dma, error=%d\n", result); - spin_unlock(&mic_ch->prep_lock); - return NULL; -} - -static struct dma_async_tx_descriptor * -mic_dma_prep_interrupt_lock(struct dma_chan *ch, unsigned long flags) -{ - struct mic_dma_chan *mic_ch = to_mic_dma_chan(ch); - int ret; - - spin_lock(&mic_ch->prep_lock); - ret = mic_dma_do_dma(mic_ch, flags, 0, 0, 0); - if (!ret) - return allocate_tx(mic_ch); - spin_unlock(&mic_ch->prep_lock); - return NULL; -} - -/* Return the status of the transaction */ -static enum dma_status -mic_dma_tx_status(struct dma_chan *ch, dma_cookie_t cookie, - struct dma_tx_state *txstate) -{ - struct mic_dma_chan *mic_ch = to_mic_dma_chan(ch); - - if (DMA_COMPLETE != dma_cookie_status(ch, cookie, txstate)) - mic_dma_cleanup(mic_ch); - - return dma_cookie_status(ch, cookie, txstate); -} - -static irqreturn_t mic_dma_thread_fn(int irq, void *data) -{ - mic_dma_cleanup((struct mic_dma_chan *)data); - return IRQ_HANDLED; -} - -static irqreturn_t mic_dma_intr_handler(int irq, void *data) -{ - struct mic_dma_chan *ch = ((struct mic_dma_chan *)data); - - mic_dma_ack_interrupt(ch); - return IRQ_WAKE_THREAD; -} - -static int mic_dma_alloc_desc_ring(struct mic_dma_chan *ch) -{ - u64 desc_ring_size = MIC_DMA_DESC_RX_SIZE * sizeof(*ch->desc_ring); - struct device *dev = &to_mbus_device(ch)->dev; - - desc_ring_size = ALIGN(desc_ring_size, MIC_DMA_ALIGN_BYTES); - ch->desc_ring = kzalloc(desc_ring_size, GFP_KERNEL); - - if (!ch->desc_ring) - return -ENOMEM; - - ch->desc_ring_micpa = dma_map_single(dev, ch->desc_ring, - desc_ring_size, DMA_BIDIRECTIONAL); - if (dma_mapping_error(dev, ch->desc_ring_micpa)) - goto map_error; - - ch->tx_array = vzalloc(array_size(MIC_DMA_DESC_RX_SIZE, - sizeof(*ch->tx_array))); - if (!ch->tx_array) - goto tx_error; - return 0; -tx_error: - dma_unmap_single(dev, ch->desc_ring_micpa, desc_ring_size, - DMA_BIDIRECTIONAL); -map_error: - kfree(ch->desc_ring); - return -ENOMEM; -} - -static void mic_dma_free_desc_ring(struct mic_dma_chan *ch) -{ - u64 desc_ring_size = MIC_DMA_DESC_RX_SIZE * sizeof(*ch->desc_ring); - - vfree(ch->tx_array); - desc_ring_size = ALIGN(desc_ring_size, MIC_DMA_ALIGN_BYTES); - dma_unmap_single(&to_mbus_device(ch)->dev, ch->desc_ring_micpa, - desc_ring_size, DMA_BIDIRECTIONAL); - kfree(ch->desc_ring); - ch->desc_ring = NULL; -} - -static void mic_dma_free_status_dest(struct mic_dma_chan *ch) -{ - dma_unmap_single(&to_mbus_device(ch)->dev, ch->status_dest_micpa, - L1_CACHE_BYTES, DMA_BIDIRECTIONAL); - kfree(ch->status_dest); -} - -static int mic_dma_alloc_status_dest(struct mic_dma_chan *ch) -{ - struct device *dev = &to_mbus_device(ch)->dev; - - ch->status_dest = kzalloc(L1_CACHE_BYTES, GFP_KERNEL); - if (!ch->status_dest) - return -ENOMEM; - ch->status_dest_micpa = dma_map_single(dev, ch->status_dest, - L1_CACHE_BYTES, DMA_BIDIRECTIONAL); - if (dma_mapping_error(dev, ch->status_dest_micpa)) { - kfree(ch->status_dest); - ch->status_dest = NULL; - return -ENOMEM; - } - return 0; -} - -static int mic_dma_check_chan(struct mic_dma_chan *ch) -{ - if (mic_dma_read_reg(ch, MIC_DMA_REG_DCHERR) || - mic_dma_read_reg(ch, MIC_DMA_REG_DSTAT) & MIC_DMA_CHAN_QUIESCE) { - mic_dma_disable_chan(ch); - mic_dma_chan_mask_intr(ch); - dev_err(mic_dma_ch_to_device(ch), - "%s %d error setting up mic dma chan %d\n", - __func__, __LINE__, ch->ch_num); - return -EBUSY; - } - return 0; -} - -static int mic_dma_chan_setup(struct mic_dma_chan *ch) -{ - if (MIC_DMA_CHAN_MIC == ch->owner) - mic_dma_chan_set_owner(ch); - mic_dma_disable_chan(ch); - mic_dma_chan_mask_intr(ch); - mic_dma_write_reg(ch, MIC_DMA_REG_DCHERRMSK, 0); - mic_dma_chan_set_desc_ring(ch); - ch->last_tail = mic_dma_read_reg(ch, MIC_DMA_REG_DTPR); - ch->head = ch->last_tail; - ch->issued = 0; - mic_dma_chan_unmask_intr(ch); - mic_dma_enable_chan(ch); - return mic_dma_check_chan(ch); -} - -static void mic_dma_chan_destroy(struct mic_dma_chan *ch) -{ - mic_dma_disable_chan(ch); - mic_dma_chan_mask_intr(ch); -} - -static int mic_dma_setup_irq(struct mic_dma_chan *ch) -{ - ch->cookie = - to_mbus_hw_ops(ch)->request_threaded_irq(to_mbus_device(ch), - mic_dma_intr_handler, mic_dma_thread_fn, - "mic dma_channel", ch, ch->ch_num); - return PTR_ERR_OR_ZERO(ch->cookie); -} - -static inline void mic_dma_free_irq(struct mic_dma_chan *ch) -{ - to_mbus_hw_ops(ch)->free_irq(to_mbus_device(ch), ch->cookie, ch); -} - -static int mic_dma_chan_init(struct mic_dma_chan *ch) -{ - int ret = mic_dma_alloc_desc_ring(ch); - - if (ret) - goto ring_error; - ret = mic_dma_alloc_status_dest(ch); - if (ret) - goto status_error; - ret = mic_dma_chan_setup(ch); - if (ret) - goto chan_error; - return ret; -chan_error: - mic_dma_free_status_dest(ch); -status_error: - mic_dma_free_desc_ring(ch); -ring_error: - return ret; -} - -static int mic_dma_drain_chan(struct mic_dma_chan *ch) -{ - struct dma_async_tx_descriptor *tx; - int err = 0; - dma_cookie_t cookie; - - tx = mic_dma_prep_memcpy_lock(&ch->api_ch, 0, 0, 0, DMA_PREP_FENCE); - if (!tx) { - err = -ENOMEM; - goto error; - } - - cookie = tx->tx_submit(tx); - if (dma_submit_error(cookie)) - err = -ENOMEM; - else - err = dma_sync_wait(&ch->api_ch, cookie); - if (err) { - dev_err(mic_dma_ch_to_device(ch), "%s %d TO chan 0x%x\n", - __func__, __LINE__, ch->ch_num); - err = -EIO; - } -error: - mic_dma_cleanup(ch); - return err; -} - -static inline void mic_dma_chan_uninit(struct mic_dma_chan *ch) -{ - mic_dma_chan_destroy(ch); - mic_dma_cleanup(ch); - mic_dma_free_status_dest(ch); - mic_dma_free_desc_ring(ch); -} - -static int mic_dma_init(struct mic_dma_device *mic_dma_dev, - enum mic_dma_chan_owner owner) -{ - int i, first_chan = mic_dma_dev->start_ch; - struct mic_dma_chan *ch; - int ret; - - for (i = first_chan; i < first_chan + MIC_DMA_NUM_CHAN; i++) { - ch = &mic_dma_dev->mic_ch[i]; - ch->ch_num = i; - ch->owner = owner; - spin_lock_init(&ch->cleanup_lock); - spin_lock_init(&ch->prep_lock); - spin_lock_init(&ch->issue_lock); - ret = mic_dma_setup_irq(ch); - if (ret) - goto error; - } - return 0; -error: - for (i = i - 1; i >= first_chan; i--) - mic_dma_free_irq(ch); - return ret; -} - -static void mic_dma_uninit(struct mic_dma_device *mic_dma_dev) -{ - int i, first_chan = mic_dma_dev->start_ch; - struct mic_dma_chan *ch; - - for (i = first_chan; i < first_chan + MIC_DMA_NUM_CHAN; i++) { - ch = &mic_dma_dev->mic_ch[i]; - mic_dma_free_irq(ch); - } -} - -static int mic_dma_alloc_chan_resources(struct dma_chan *ch) -{ - int ret = mic_dma_chan_init(to_mic_dma_chan(ch)); - if (ret) - return ret; - return MIC_DMA_DESC_RX_SIZE; -} - -static void mic_dma_free_chan_resources(struct dma_chan *ch) -{ - struct mic_dma_chan *mic_ch = to_mic_dma_chan(ch); - mic_dma_drain_chan(mic_ch); - mic_dma_chan_uninit(mic_ch); -} - -/* Set the fn. handlers and register the dma device with dma api */ -static int mic_dma_register_dma_device(struct mic_dma_device *mic_dma_dev, - enum mic_dma_chan_owner owner) -{ - int i, first_chan = mic_dma_dev->start_ch; - - dma_cap_zero(mic_dma_dev->dma_dev.cap_mask); - /* - * This dma engine is not capable of host memory to host memory - * transfers - */ - dma_cap_set(DMA_MEMCPY, mic_dma_dev->dma_dev.cap_mask); - - if (MIC_DMA_CHAN_HOST == owner) - dma_cap_set(DMA_PRIVATE, mic_dma_dev->dma_dev.cap_mask); - mic_dma_dev->dma_dev.device_alloc_chan_resources = - mic_dma_alloc_chan_resources; - mic_dma_dev->dma_dev.device_free_chan_resources = - mic_dma_free_chan_resources; - mic_dma_dev->dma_dev.device_tx_status = mic_dma_tx_status; - mic_dma_dev->dma_dev.device_prep_dma_memcpy = mic_dma_prep_memcpy_lock; - mic_dma_dev->dma_dev.device_prep_dma_imm_data = - mic_dma_prep_status_lock; - mic_dma_dev->dma_dev.device_prep_dma_interrupt = - mic_dma_prep_interrupt_lock; - mic_dma_dev->dma_dev.device_issue_pending = mic_dma_issue_pending; - mic_dma_dev->dma_dev.copy_align = MIC_DMA_ALIGN_SHIFT; - INIT_LIST_HEAD(&mic_dma_dev->dma_dev.channels); - for (i = first_chan; i < first_chan + MIC_DMA_NUM_CHAN; i++) { - mic_dma_dev->mic_ch[i].api_ch.device = &mic_dma_dev->dma_dev; - dma_cookie_init(&mic_dma_dev->mic_ch[i].api_ch); - list_add_tail(&mic_dma_dev->mic_ch[i].api_ch.device_node, - &mic_dma_dev->dma_dev.channels); - } - return dmaenginem_async_device_register(&mic_dma_dev->dma_dev); -} - -/* - * Initializes dma channels and registers the dma device with the - * dma engine api. - */ -static struct mic_dma_device *mic_dma_dev_reg(struct mbus_device *mbdev, - enum mic_dma_chan_owner owner) -{ - struct mic_dma_device *mic_dma_dev; - int ret; - struct device *dev = &mbdev->dev; - - mic_dma_dev = devm_kzalloc(dev, sizeof(*mic_dma_dev), GFP_KERNEL); - if (!mic_dma_dev) { - ret = -ENOMEM; - goto alloc_error; - } - mic_dma_dev->mbdev = mbdev; - mic_dma_dev->dma_dev.dev = dev; - mic_dma_dev->mmio = mbdev->mmio_va; - if (MIC_DMA_CHAN_HOST == owner) { - mic_dma_dev->start_ch = 0; - mic_dma_dev->max_xfer_size = MIC_DMA_MAX_XFER_SIZE_HOST; - } else { - mic_dma_dev->start_ch = 4; - mic_dma_dev->max_xfer_size = MIC_DMA_MAX_XFER_SIZE_CARD; - } - ret = mic_dma_init(mic_dma_dev, owner); - if (ret) - goto init_error; - ret = mic_dma_register_dma_device(mic_dma_dev, owner); - if (ret) - goto reg_error; - return mic_dma_dev; -reg_error: - mic_dma_uninit(mic_dma_dev); -init_error: - mic_dma_dev = NULL; -alloc_error: - dev_err(dev, "Error at %s %d ret=%d\n", __func__, __LINE__, ret); - return mic_dma_dev; -} - -static void mic_dma_dev_unreg(struct mic_dma_device *mic_dma_dev) -{ - mic_dma_uninit(mic_dma_dev); -} - -/* DEBUGFS CODE */ -static int mic_dma_reg_show(struct seq_file *s, void *pos) -{ - struct mic_dma_device *mic_dma_dev = s->private; - int i, chan_num, first_chan = mic_dma_dev->start_ch; - struct mic_dma_chan *ch; - - seq_printf(s, "SBOX_DCR: %#x\n", - mic_dma_mmio_read(&mic_dma_dev->mic_ch[first_chan], - MIC_DMA_SBOX_BASE + MIC_DMA_SBOX_DCR)); - seq_puts(s, "DMA Channel Registers\n"); - seq_printf(s, "%-10s| %-10s %-10s %-10s %-10s %-10s", - "Channel", "DCAR", "DTPR", "DHPR", "DRAR_HI", "DRAR_LO"); - seq_printf(s, " %-11s %-14s %-10s\n", "DCHERR", "DCHERRMSK", "DSTAT"); - for (i = first_chan; i < first_chan + MIC_DMA_NUM_CHAN; i++) { - ch = &mic_dma_dev->mic_ch[i]; - chan_num = ch->ch_num; - seq_printf(s, "%-10i| %-#10x %-#10x %-#10x %-#10x", - chan_num, - mic_dma_read_reg(ch, MIC_DMA_REG_DCAR), - mic_dma_read_reg(ch, MIC_DMA_REG_DTPR), - mic_dma_read_reg(ch, MIC_DMA_REG_DHPR), - mic_dma_read_reg(ch, MIC_DMA_REG_DRAR_HI)); - seq_printf(s, " %-#10x %-#10x %-#14x %-#10x\n", - mic_dma_read_reg(ch, MIC_DMA_REG_DRAR_LO), - mic_dma_read_reg(ch, MIC_DMA_REG_DCHERR), - mic_dma_read_reg(ch, MIC_DMA_REG_DCHERRMSK), - mic_dma_read_reg(ch, MIC_DMA_REG_DSTAT)); - } - return 0; -} - -DEFINE_SHOW_ATTRIBUTE(mic_dma_reg); - -/* Debugfs parent dir */ -static struct dentry *mic_dma_dbg; - -static int mic_dma_driver_probe(struct mbus_device *mbdev) -{ - struct mic_dma_device *mic_dma_dev; - enum mic_dma_chan_owner owner; - - if (MBUS_DEV_DMA_MIC == mbdev->id.device) - owner = MIC_DMA_CHAN_MIC; - else - owner = MIC_DMA_CHAN_HOST; - - mic_dma_dev = mic_dma_dev_reg(mbdev, owner); - dev_set_drvdata(&mbdev->dev, mic_dma_dev); - - if (mic_dma_dbg) { - mic_dma_dev->dbg_dir = debugfs_create_dir(dev_name(&mbdev->dev), - mic_dma_dbg); - debugfs_create_file("mic_dma_reg", 0444, mic_dma_dev->dbg_dir, - mic_dma_dev, &mic_dma_reg_fops); - } - return 0; -} - -static void mic_dma_driver_remove(struct mbus_device *mbdev) -{ - struct mic_dma_device *mic_dma_dev; - - mic_dma_dev = dev_get_drvdata(&mbdev->dev); - debugfs_remove_recursive(mic_dma_dev->dbg_dir); - mic_dma_dev_unreg(mic_dma_dev); -} - -static struct mbus_device_id id_table[] = { - {MBUS_DEV_DMA_MIC, MBUS_DEV_ANY_ID}, - {MBUS_DEV_DMA_HOST, MBUS_DEV_ANY_ID}, - {0}, -}; - -static struct mbus_driver mic_dma_driver = { - .driver.name = KBUILD_MODNAME, - .driver.owner = THIS_MODULE, - .id_table = id_table, - .probe = mic_dma_driver_probe, - .remove = mic_dma_driver_remove, -}; - -static int __init mic_x100_dma_init(void) -{ - int rc = mbus_register_driver(&mic_dma_driver); - if (rc) - return rc; - mic_dma_dbg = debugfs_create_dir(KBUILD_MODNAME, NULL); - return 0; -} - -static void __exit mic_x100_dma_exit(void) -{ - debugfs_remove_recursive(mic_dma_dbg); - mbus_unregister_driver(&mic_dma_driver); -} - -module_init(mic_x100_dma_init); -module_exit(mic_x100_dma_exit); - -MODULE_DEVICE_TABLE(mbus, id_table); -MODULE_AUTHOR("Intel Corporation"); -MODULE_DESCRIPTION("Intel(R) MIC X100 DMA Driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/dma/mic_x100_dma.h b/drivers/dma/mic_x100_dma.h deleted file mode 100644 index 68ef43a91714..000000000000 --- a/drivers/dma/mic_x100_dma.h +++ /dev/null @@ -1,275 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel MIC X100 DMA Driver. - * - * Adapted from IOAT dma driver. - */ -#ifndef _MIC_X100_DMA_H_ -#define _MIC_X100_DMA_H_ - -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/debugfs.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/mic_bus.h> - -#include "dmaengine.h" - -/* - * MIC has a total of 8 dma channels. - * Four channels are assigned for host SW use & the remaining for MIC SW. - * MIC DMA transfer size & addresses need to be 64 byte aligned. - */ -#define MIC_DMA_MAX_NUM_CHAN 8 -#define MIC_DMA_NUM_CHAN 4 -#define MIC_DMA_ALIGN_SHIFT DMAENGINE_ALIGN_64_BYTES -#define MIC_DMA_ALIGN_BYTES (1 << MIC_DMA_ALIGN_SHIFT) -#define MIC_DMA_DESC_RX_SIZE (128 * 1024 - 4) - -/* - * Register descriptions - * All the registers are 32 bit registers. - * DCR is a global register and all others are per-channel. - * DCR - bits 0, 2, 4, 6, 8, 10, 12, 14 - enable bits for channels 0 to 7 - * bits 1, 3, 5, 7, 9, 11, 13, 15 - owner bits for channels 0 to 7 - * DCAR - bit 24 & 25 interrupt masks for mic owned & host owned channels - * DHPR - head of the descriptor ring updated by s/w - * DTPR - tail of the descriptor ring updated by h/w - * DRAR_LO - lower 32 bits of descriptor ring's mic address - * DRAR_HI - 3:0 - remaining 4 bits of descriptor ring's mic address - * 20:4 descriptor ring size - * 25:21 mic smpt entry number - * DSTAT - 16:0 h/w completion count; 31:28 dma engine status - * DCHERR - this register is non-zero on error - * DCHERRMSK - interrupt mask register - */ -#define MIC_DMA_HW_CMP_CNT_MASK 0x1ffff -#define MIC_DMA_CHAN_QUIESCE 0x20000000 -#define MIC_DMA_SBOX_BASE 0x00010000 -#define MIC_DMA_SBOX_DCR 0x0000A280 -#define MIC_DMA_SBOX_CH_BASE 0x0001A000 -#define MIC_DMA_SBOX_CHAN_OFF 0x40 -#define MIC_DMA_SBOX_DCAR_IM0 (0x1 << 24) -#define MIC_DMA_SBOX_DCAR_IM1 (0x1 << 25) -#define MIC_DMA_SBOX_DRARHI_SYS_MASK (0x1 << 26) -#define MIC_DMA_REG_DCAR 0 -#define MIC_DMA_REG_DHPR 4 -#define MIC_DMA_REG_DTPR 8 -#define MIC_DMA_REG_DRAR_LO 20 -#define MIC_DMA_REG_DRAR_HI 24 -#define MIC_DMA_REG_DSTAT 32 -#define MIC_DMA_REG_DCHERR 44 -#define MIC_DMA_REG_DCHERRMSK 48 - -/* HW dma desc */ -struct mic_dma_desc { - u64 qw0; - u64 qw1; -}; - -enum mic_dma_chan_owner { - MIC_DMA_CHAN_MIC = 0, - MIC_DMA_CHAN_HOST -}; - -/* - * mic_dma_chan - channel specific information - * @ch_num: channel number - * @owner: owner of this channel - * @last_tail: cached value of descriptor ring tail - * @head: index of next descriptor in desc_ring - * @issued: hardware notification point - * @submitted: index that will be used to submit descriptors to h/w - * @api_ch: dma engine api channel - * @desc_ring: dma descriptor ring - * @desc_ring_micpa: mic physical address of desc_ring - * @status_dest: destination for status (fence) descriptor - * @status_dest_micpa: mic address for status_dest, - * DMA controller uses this address - * @tx_array: array of async_tx - * @cleanup_lock: lock held when processing completed tx - * @prep_lock: lock held in prep_memcpy & released in tx_submit - * @issue_lock: lock used to synchronize writes to head - * @cookie: mic_irq cookie used with mic irq request - */ -struct mic_dma_chan { - int ch_num; - enum mic_dma_chan_owner owner; - u32 last_tail; - u32 head; - u32 issued; - u32 submitted; - struct dma_chan api_ch; - struct mic_dma_desc *desc_ring; - dma_addr_t desc_ring_micpa; - u64 *status_dest; - dma_addr_t status_dest_micpa; - struct dma_async_tx_descriptor *tx_array; - spinlock_t cleanup_lock; - spinlock_t prep_lock; - spinlock_t issue_lock; - struct mic_irq *cookie; -}; - -/* - * struct mic_dma_device - per mic device - * @mic_ch: dma channels - * @dma_dev: underlying dma device - * @mbdev: mic bus dma device - * @mmio: virtual address of the mmio space - * @dbg_dir: debugfs directory - * @start_ch: first channel number that can be used - * @max_xfer_size: maximum transfer size per dma descriptor - */ -struct mic_dma_device { - struct mic_dma_chan mic_ch[MIC_DMA_MAX_NUM_CHAN]; - struct dma_device dma_dev; - struct mbus_device *mbdev; - void __iomem *mmio; - struct dentry *dbg_dir; - int start_ch; - size_t max_xfer_size; -}; - -static inline struct mic_dma_chan *to_mic_dma_chan(struct dma_chan *ch) -{ - return container_of(ch, struct mic_dma_chan, api_ch); -} - -static inline struct mic_dma_device *to_mic_dma_dev(struct mic_dma_chan *ch) -{ - return - container_of((const typeof(((struct mic_dma_device *)0)->mic_ch)*) - (ch - ch->ch_num), struct mic_dma_device, mic_ch); -} - -static inline struct mbus_device *to_mbus_device(struct mic_dma_chan *ch) -{ - return to_mic_dma_dev(ch)->mbdev; -} - -static inline struct mbus_hw_ops *to_mbus_hw_ops(struct mic_dma_chan *ch) -{ - return to_mbus_device(ch)->hw_ops; -} - -static inline struct device *mic_dma_ch_to_device(struct mic_dma_chan *ch) -{ - return to_mic_dma_dev(ch)->dma_dev.dev; -} - -static inline void __iomem *mic_dma_chan_to_mmio(struct mic_dma_chan *ch) -{ - return to_mic_dma_dev(ch)->mmio; -} - -static inline u32 mic_dma_read_reg(struct mic_dma_chan *ch, u32 reg) -{ - return ioread32(mic_dma_chan_to_mmio(ch) + MIC_DMA_SBOX_CH_BASE + - ch->ch_num * MIC_DMA_SBOX_CHAN_OFF + reg); -} - -static inline void mic_dma_write_reg(struct mic_dma_chan *ch, u32 reg, u32 val) -{ - iowrite32(val, mic_dma_chan_to_mmio(ch) + MIC_DMA_SBOX_CH_BASE + - ch->ch_num * MIC_DMA_SBOX_CHAN_OFF + reg); -} - -static inline u32 mic_dma_mmio_read(struct mic_dma_chan *ch, u32 offset) -{ - return ioread32(mic_dma_chan_to_mmio(ch) + offset); -} - -static inline void mic_dma_mmio_write(struct mic_dma_chan *ch, u32 val, - u32 offset) -{ - iowrite32(val, mic_dma_chan_to_mmio(ch) + offset); -} - -static inline u32 mic_dma_read_cmp_cnt(struct mic_dma_chan *ch) -{ - return mic_dma_read_reg(ch, MIC_DMA_REG_DSTAT) & - MIC_DMA_HW_CMP_CNT_MASK; -} - -static inline void mic_dma_chan_set_owner(struct mic_dma_chan *ch) -{ - u32 dcr = mic_dma_mmio_read(ch, MIC_DMA_SBOX_BASE + MIC_DMA_SBOX_DCR); - u32 chan_num = ch->ch_num; - - dcr = (dcr & ~(0x1 << (chan_num * 2))) | (ch->owner << (chan_num * 2)); - mic_dma_mmio_write(ch, dcr, MIC_DMA_SBOX_BASE + MIC_DMA_SBOX_DCR); -} - -static inline void mic_dma_enable_chan(struct mic_dma_chan *ch) -{ - u32 dcr = mic_dma_mmio_read(ch, MIC_DMA_SBOX_BASE + MIC_DMA_SBOX_DCR); - - dcr |= 2 << (ch->ch_num << 1); - mic_dma_mmio_write(ch, dcr, MIC_DMA_SBOX_BASE + MIC_DMA_SBOX_DCR); -} - -static inline void mic_dma_disable_chan(struct mic_dma_chan *ch) -{ - u32 dcr = mic_dma_mmio_read(ch, MIC_DMA_SBOX_BASE + MIC_DMA_SBOX_DCR); - - dcr &= ~(2 << (ch->ch_num << 1)); - mic_dma_mmio_write(ch, dcr, MIC_DMA_SBOX_BASE + MIC_DMA_SBOX_DCR); -} - -static void mic_dma_chan_set_desc_ring(struct mic_dma_chan *ch) -{ - u32 drar_hi; - dma_addr_t desc_ring_micpa = ch->desc_ring_micpa; - - drar_hi = (MIC_DMA_DESC_RX_SIZE & 0x1ffff) << 4; - if (MIC_DMA_CHAN_MIC == ch->owner) { - drar_hi |= (desc_ring_micpa >> 32) & 0xf; - } else { - drar_hi |= MIC_DMA_SBOX_DRARHI_SYS_MASK; - drar_hi |= ((desc_ring_micpa >> 34) - & 0x1f) << 21; - drar_hi |= (desc_ring_micpa >> 32) & 0x3; - } - mic_dma_write_reg(ch, MIC_DMA_REG_DRAR_LO, (u32) desc_ring_micpa); - mic_dma_write_reg(ch, MIC_DMA_REG_DRAR_HI, drar_hi); -} - -static inline void mic_dma_chan_mask_intr(struct mic_dma_chan *ch) -{ - u32 dcar = mic_dma_read_reg(ch, MIC_DMA_REG_DCAR); - - if (MIC_DMA_CHAN_MIC == ch->owner) - dcar |= MIC_DMA_SBOX_DCAR_IM0; - else - dcar |= MIC_DMA_SBOX_DCAR_IM1; - mic_dma_write_reg(ch, MIC_DMA_REG_DCAR, dcar); -} - -static inline void mic_dma_chan_unmask_intr(struct mic_dma_chan *ch) -{ - u32 dcar = mic_dma_read_reg(ch, MIC_DMA_REG_DCAR); - - if (MIC_DMA_CHAN_MIC == ch->owner) - dcar &= ~MIC_DMA_SBOX_DCAR_IM0; - else - dcar &= ~MIC_DMA_SBOX_DCAR_IM1; - mic_dma_write_reg(ch, MIC_DMA_REG_DCAR, dcar); -} - -static void mic_dma_ack_interrupt(struct mic_dma_chan *ch) -{ - if (MIC_DMA_CHAN_MIC == ch->owner) { - /* HW errata */ - mic_dma_chan_mask_intr(ch); - mic_dma_chan_unmask_intr(ch); - } - to_mbus_hw_ops(ch)->ack_interrupt(to_mbus_device(ch), ch->ch_num); -} -#endif diff --git a/drivers/firmware/arm_scmi/base.c b/drivers/firmware/arm_scmi/base.c index 9853bd3c4d45..017e5d8bd869 100644 --- a/drivers/firmware/arm_scmi/base.c +++ b/drivers/firmware/arm_scmi/base.c @@ -197,6 +197,8 @@ static int scmi_base_implementation_list_get(const struct scmi_handle *handle, protocols_imp[tot_num_ret + loop] = *(list + loop); tot_num_ret += loop_num_ret; + + scmi_reset_rx_to_maxsz(handle, t); } while (loop_num_ret); scmi_xfer_put(handle, t); diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c index c1cfe3ee3d55..4645677d86f1 100644 --- a/drivers/firmware/arm_scmi/clock.c +++ b/drivers/firmware/arm_scmi/clock.c @@ -192,6 +192,8 @@ scmi_clock_describe_rates_get(const struct scmi_handle *handle, u32 clk_id, } tot_rate_cnt += num_returned; + + scmi_reset_rx_to_maxsz(handle, t); /* * check for both returned and remaining to avoid infinite * loop due to buggy firmware diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h index 37fb583f1bf5..65063fa948d4 100644 --- a/drivers/firmware/arm_scmi/common.h +++ b/drivers/firmware/arm_scmi/common.h @@ -147,6 +147,8 @@ int scmi_do_xfer_with_response(const struct scmi_handle *h, struct scmi_xfer *xfer); int scmi_xfer_get_init(const struct scmi_handle *h, u8 msg_id, u8 prot_id, size_t tx_size, size_t rx_size, struct scmi_xfer **p); +void scmi_reset_rx_to_maxsz(const struct scmi_handle *handle, + struct scmi_xfer *xfer); int scmi_handle_put(const struct scmi_handle *handle); struct scmi_handle *scmi_handle_get(struct device *dev); void scmi_set_handle(struct scmi_device *scmi_dev); diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c index c5dea87edf8f..3dfd8b6a0ebf 100644 --- a/drivers/firmware/arm_scmi/driver.c +++ b/drivers/firmware/arm_scmi/driver.c @@ -402,6 +402,14 @@ int scmi_do_xfer(const struct scmi_handle *handle, struct scmi_xfer *xfer) return ret; } +void scmi_reset_rx_to_maxsz(const struct scmi_handle *handle, + struct scmi_xfer *xfer) +{ + struct scmi_info *info = handle_to_scmi_info(handle); + + xfer->rx.len = info->desc->max_msg_size; +} + #define SCMI_MAX_RESPONSE_TIMEOUT (2 * MSEC_PER_SEC) /** diff --git a/drivers/firmware/arm_scmi/notify.c b/drivers/firmware/arm_scmi/notify.c index 2754f9d01636..ce336899d636 100644 --- a/drivers/firmware/arm_scmi/notify.c +++ b/drivers/firmware/arm_scmi/notify.c @@ -1403,15 +1403,21 @@ static void scmi_protocols_late_init(struct work_struct *work) "finalized PENDING handler - key:%X\n", hndl->key); ret = scmi_event_handler_enable_events(hndl); + if (ret) { + dev_dbg(ni->handle->dev, + "purging INVALID handler - key:%X\n", + hndl->key); + scmi_put_active_handler(ni, hndl); + } } else { ret = scmi_valid_pending_handler(ni, hndl); - } - if (ret) { - dev_dbg(ni->handle->dev, - "purging PENDING handler - key:%X\n", - hndl->key); - /* this hndl can be only a pending one */ - scmi_put_handler_unlocked(ni, hndl); + if (ret) { + dev_dbg(ni->handle->dev, + "purging PENDING handler - key:%X\n", + hndl->key); + /* this hndl can be only a pending one */ + scmi_put_handler_unlocked(ni, hndl); + } } } mutex_unlock(&ni->pending_mtx); @@ -1468,7 +1474,7 @@ int scmi_notification_init(struct scmi_handle *handle) ni->gid = gid; ni->handle = handle; - ni->notify_wq = alloc_workqueue("scmi_notify", + ni->notify_wq = alloc_workqueue(dev_name(handle->dev), WQ_UNBOUND | WQ_FREEZABLE | WQ_SYSFS, 0); if (!ni->notify_wq) diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c index ed475b40bd08..82fb3babff72 100644 --- a/drivers/firmware/arm_scmi/perf.c +++ b/drivers/firmware/arm_scmi/perf.c @@ -304,6 +304,8 @@ scmi_perf_describe_levels_get(const struct scmi_handle *handle, u32 domain, } tot_opp_cnt += num_returned; + + scmi_reset_rx_to_maxsz(handle, t); /* * check for both returned and remaining to avoid infinite * loop due to buggy firmware diff --git a/drivers/firmware/arm_scmi/reset.c b/drivers/firmware/arm_scmi/reset.c index f063cfe17e02..a981a22cfe89 100644 --- a/drivers/firmware/arm_scmi/reset.c +++ b/drivers/firmware/arm_scmi/reset.c @@ -36,9 +36,7 @@ struct scmi_msg_reset_domain_reset { #define EXPLICIT_RESET_ASSERT BIT(1) #define ASYNCHRONOUS_RESET BIT(2) __le32 reset_state; -#define ARCH_RESET_TYPE BIT(31) -#define COLD_RESET_STATE BIT(0) -#define ARCH_COLD_RESET (ARCH_RESET_TYPE | COLD_RESET_STATE) +#define ARCH_COLD_RESET 0 }; struct scmi_msg_reset_notify { diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c index 9703cf6356a0..b4232d611033 100644 --- a/drivers/firmware/arm_scmi/sensors.c +++ b/drivers/firmware/arm_scmi/sensors.c @@ -166,6 +166,8 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle, } desc_index += num_returned; + + scmi_reset_rx_to_maxsz(handle, t); /* * check for both returned and remaining to avoid infinite * loop due to buggy firmware diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/smc.c index 1a03c3ec0230..82a82a5dc86a 100644 --- a/drivers/firmware/arm_scmi/smc.c +++ b/drivers/firmware/arm_scmi/smc.c @@ -149,6 +149,6 @@ static const struct scmi_transport_ops scmi_smc_ops = { const struct scmi_desc scmi_smc_desc = { .ops = &scmi_smc_ops, .max_rx_timeout_ms = 30, - .max_msg = 1, + .max_msg = 20, .max_msg_size = 128, }; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 37da3537ba2e..e3783f5a459d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -80,6 +80,7 @@ MODULE_FIRMWARE("amdgpu/renoir_gpu_info.bin"); MODULE_FIRMWARE("amdgpu/navi10_gpu_info.bin"); MODULE_FIRMWARE("amdgpu/navi14_gpu_info.bin"); MODULE_FIRMWARE("amdgpu/navi12_gpu_info.bin"); +MODULE_FIRMWARE("amdgpu/green_sardine_gpu_info.bin"); #define AMDGPU_RESUME_MS 2000 @@ -239,9 +240,11 @@ bool amdgpu_device_supports_baco(struct drm_device *dev) return amdgpu_asic_supports_baco(adev); } +/* + * VRAM access helper functions + */ + /** - * VRAM access helper functions. - * * amdgpu_device_vram_access - read/write a buffer in vram * * @adev: amdgpu_device pointer @@ -705,7 +708,7 @@ void amdgpu_device_indirect_wreg64(struct amdgpu_device *adev, /** * amdgpu_invalid_rreg - dummy reg read function * - * @adev: amdgpu device pointer + * @adev: amdgpu_device pointer * @reg: offset of register * * Dummy register read function. Used for register blocks @@ -722,7 +725,7 @@ static uint32_t amdgpu_invalid_rreg(struct amdgpu_device *adev, uint32_t reg) /** * amdgpu_invalid_wreg - dummy reg write function * - * @adev: amdgpu device pointer + * @adev: amdgpu_device pointer * @reg: offset of register * @v: value to write to the register * @@ -739,7 +742,7 @@ static void amdgpu_invalid_wreg(struct amdgpu_device *adev, uint32_t reg, uint32 /** * amdgpu_invalid_rreg64 - dummy 64 bit reg read function * - * @adev: amdgpu device pointer + * @adev: amdgpu_device pointer * @reg: offset of register * * Dummy register read function. Used for register blocks @@ -756,7 +759,7 @@ static uint64_t amdgpu_invalid_rreg64(struct amdgpu_device *adev, uint32_t reg) /** * amdgpu_invalid_wreg64 - dummy reg write function * - * @adev: amdgpu device pointer + * @adev: amdgpu_device pointer * @reg: offset of register * @v: value to write to the register * @@ -773,7 +776,7 @@ static void amdgpu_invalid_wreg64(struct amdgpu_device *adev, uint32_t reg, uint /** * amdgpu_block_invalid_rreg - dummy reg read function * - * @adev: amdgpu device pointer + * @adev: amdgpu_device pointer * @block: offset of instance * @reg: offset of register * @@ -793,7 +796,7 @@ static uint32_t amdgpu_block_invalid_rreg(struct amdgpu_device *adev, /** * amdgpu_block_invalid_wreg - dummy reg write function * - * @adev: amdgpu device pointer + * @adev: amdgpu_device pointer * @block: offset of instance * @reg: offset of register * @v: value to write to the register @@ -813,7 +816,7 @@ static void amdgpu_block_invalid_wreg(struct amdgpu_device *adev, /** * amdgpu_device_asic_init - Wrapper for atom asic_init * - * @dev: drm_device pointer + * @adev: amdgpu_device pointer * * Does any asic specific work and then calls atom asic init. */ @@ -827,7 +830,7 @@ static int amdgpu_device_asic_init(struct amdgpu_device *adev) /** * amdgpu_device_vram_scratch_init - allocate the VRAM scratch page * - * @adev: amdgpu device pointer + * @adev: amdgpu_device pointer * * Allocates a scratch page of VRAM for use by various things in the * driver. @@ -844,7 +847,7 @@ static int amdgpu_device_vram_scratch_init(struct amdgpu_device *adev) /** * amdgpu_device_vram_scratch_fini - Free the VRAM scratch page * - * @adev: amdgpu device pointer + * @adev: amdgpu_device pointer * * Frees the VRAM scratch page. */ @@ -1803,7 +1806,10 @@ static int amdgpu_device_parse_gpu_info_fw(struct amdgpu_device *adev) chip_name = "arcturus"; break; case CHIP_RENOIR: - chip_name = "renoir"; + if (adev->apu_flags & AMD_APU_IS_RENOIR) + chip_name = "renoir"; + else + chip_name = "green_sardine"; break; case CHIP_NAVI10: chip_name = "navi10"; @@ -3011,7 +3017,7 @@ bool amdgpu_device_asic_has_dc_support(enum amd_asic_type asic_type) /** * amdgpu_device_has_dc_support - check if dc is supported * - * @adev: amdgpu_device_pointer + * @adev: amdgpu_device pointer * * Returns true for supported, false for not supported */ @@ -4045,7 +4051,7 @@ static int amdgpu_device_recover_vram(struct amdgpu_device *adev) /** * amdgpu_device_reset_sriov - reset ASIC for SR-IOV vf * - * @adev: amdgpu device pointer + * @adev: amdgpu_device pointer * @from_hypervisor: request from hypervisor * * do VF FLR and reinitialize Asic @@ -4100,7 +4106,7 @@ error: /** * amdgpu_device_has_job_running - check if there is any job in mirror list * - * @adev: amdgpu device pointer + * @adev: amdgpu_device pointer * * check if there is any job in mirror list */ @@ -4128,7 +4134,7 @@ bool amdgpu_device_has_job_running(struct amdgpu_device *adev) /** * amdgpu_device_should_recover_gpu - check if we should try GPU recovery * - * @adev: amdgpu device pointer + * @adev: amdgpu_device pointer * * Check amdgpu_gpu_recovery and SRIOV status to see if we should try to recover * a hung GPU. @@ -4477,7 +4483,7 @@ static int amdgpu_device_suspend_display_audio(struct amdgpu_device *adev) /** * amdgpu_device_gpu_recover - reset the asic and recover scheduler * - * @adev: amdgpu device pointer + * @adev: amdgpu_device pointer * @job: which job trigger hang * * Attempt to reset the GPU if it has hung (all asics). @@ -4497,7 +4503,7 @@ int amdgpu_device_gpu_recover(struct amdgpu_device *adev, bool need_emergency_restart = false; bool audio_suspended = false; - /** + /* * Special case: RAS triggered and full reset isn't supported */ need_emergency_restart = amdgpu_ras_need_emergency_restart(adev); diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index c241317edee7..42d9748921f5 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -1066,6 +1066,7 @@ static const struct pci_device_id pciidlist[] = { {0x1002, 0x7319, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10}, {0x1002, 0x731A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10}, {0x1002, 0x731B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10}, + {0x1002, 0x731E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10}, {0x1002, 0x731F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10}, /* Navi14 */ {0x1002, 0x7340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI14}, diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c index aa7f230c71bf..7e8265da9f25 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c @@ -596,6 +596,7 @@ int amdgpu_gem_va_ioctl(struct drm_device *dev, void *data, struct ww_acquire_ctx ticket; struct list_head list, duplicates; uint64_t va_flags; + uint64_t vm_size; int r = 0; if (args->va_address < AMDGPU_VA_RESERVED_SIZE) { @@ -616,6 +617,15 @@ int amdgpu_gem_va_ioctl(struct drm_device *dev, void *data, args->va_address &= AMDGPU_GMC_HOLE_MASK; + vm_size = adev->vm_manager.max_pfn * AMDGPU_GPU_PAGE_SIZE; + vm_size -= AMDGPU_VA_RESERVED_SIZE; + if (args->va_address + args->map_size > vm_size) { + dev_dbg(&dev->pdev->dev, + "va_address 0x%llx is in top reserved area 0x%llx\n", + args->va_address + args->map_size, vm_size); + return -EINVAL; + } + if ((args->flags & ~valid_flags) && (args->flags & ~prt_flags)) { dev_dbg(&dev->pdev->dev, "invalid flags combination 0x%08X\n", args->flags); diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c index f203e4a6a3f2..731f3aa2e6ba 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c @@ -81,8 +81,8 @@ static const struct ttm_resource_manager_func amdgpu_gtt_mgr_func; /** * amdgpu_gtt_mgr_init - init GTT manager and DRM MM * - * @man: TTM memory type manager - * @p_size: maximum size of GTT + * @adev: amdgpu_device pointer + * @gtt_size: maximum size of GTT * * Allocate and initialize the GTT manager. */ @@ -123,7 +123,7 @@ int amdgpu_gtt_mgr_init(struct amdgpu_device *adev, uint64_t gtt_size) /** * amdgpu_gtt_mgr_fini - free and destroy GTT manager * - * @man: TTM memory type manager + * @adev: amdgpu_device pointer * * Destroy and free the GTT manager, returns -EBUSY if ranges are still * allocated inside it. diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c index 96a9699f87ba..a6dbe4b83533 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c @@ -2524,6 +2524,7 @@ int parse_ta_bin_descriptor(struct psp_context *psp, psp->asd_feature_version = le32_to_cpu(desc->fw_version); psp->asd_ucode_size = le32_to_cpu(desc->size_bytes); psp->asd_start_addr = ucode_start_addr; + psp->asd_fw = psp->ta_fw; break; case TA_FW_TYPE_PSP_XGMI: psp->ta_xgmi_ucode_version = le32_to_cpu(desc->fw_version); diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c index f3b7287e84c4..a563328e3dae 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c @@ -39,6 +39,7 @@ #define FIRMWARE_RAVEN2 "amdgpu/raven2_vcn.bin" #define FIRMWARE_ARCTURUS "amdgpu/arcturus_vcn.bin" #define FIRMWARE_RENOIR "amdgpu/renoir_vcn.bin" +#define FIRMWARE_GREEN_SARDINE "amdgpu/green_sardine_vcn.bin" #define FIRMWARE_NAVI10 "amdgpu/navi10_vcn.bin" #define FIRMWARE_NAVI14 "amdgpu/navi14_vcn.bin" #define FIRMWARE_NAVI12 "amdgpu/navi12_vcn.bin" @@ -50,6 +51,7 @@ MODULE_FIRMWARE(FIRMWARE_PICASSO); MODULE_FIRMWARE(FIRMWARE_RAVEN2); MODULE_FIRMWARE(FIRMWARE_ARCTURUS); MODULE_FIRMWARE(FIRMWARE_RENOIR); +MODULE_FIRMWARE(FIRMWARE_GREEN_SARDINE); MODULE_FIRMWARE(FIRMWARE_NAVI10); MODULE_FIRMWARE(FIRMWARE_NAVI14); MODULE_FIRMWARE(FIRMWARE_NAVI12); @@ -89,7 +91,11 @@ int amdgpu_vcn_sw_init(struct amdgpu_device *adev) adev->vcn.indirect_sram = true; break; case CHIP_RENOIR: - fw_name = FIRMWARE_RENOIR; + if (adev->apu_flags & AMD_APU_IS_RENOIR) + fw_name = FIRMWARE_RENOIR; + else + fw_name = FIRMWARE_GREEN_SARDINE; + if ((adev->firmware.load_type == AMDGPU_FW_LOAD_PSP) && (adev->pg_flags & AMD_PG_SUPPORT_VCN_DPG)) adev->vcn.indirect_sram = true; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h index c6abb16e8018..58c83a7ad0fd 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h @@ -112,8 +112,8 @@ struct amdgpu_bo_list_entry; #define AMDGPU_MMHUB_0 1 #define AMDGPU_MMHUB_1 2 -/* hardcode that limit for now */ -#define AMDGPU_VA_RESERVED_SIZE (1ULL << 20) +/* Reserve 2MB at top/bottom of address space for kernel use */ +#define AMDGPU_VA_RESERVED_SIZE (2ULL << 20) /* max vmids dedicated for process */ #define AMDGPU_VM_MAX_RESERVED_VMID 1 diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c index 01c1171afbe0..0c6b7c5ecfec 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c @@ -168,8 +168,7 @@ static const struct ttm_resource_manager_func amdgpu_vram_mgr_func; /** * amdgpu_vram_mgr_init - init VRAM manager and DRM MM * - * @man: TTM memory type manager - * @p_size: maximum size of VRAM + * @adev: amdgpu_device pointer * * Allocate and initialize the VRAM manager. */ @@ -199,7 +198,7 @@ int amdgpu_vram_mgr_init(struct amdgpu_device *adev) /** * amdgpu_vram_mgr_fini - free and destroy VRAM manager * - * @man: TTM memory type manager + * @adev: amdgpu_device pointer * * Destroy and free the VRAM manager, returns -EBUSY if ranges are still * allocated inside it. @@ -229,7 +228,7 @@ void amdgpu_vram_mgr_fini(struct amdgpu_device *adev) /** * amdgpu_vram_mgr_vis_size - Calculate visible node size * - * @adev: amdgpu device structure + * @adev: amdgpu_device pointer * @node: MM node structure * * Calculate how many bytes of the MM node are inside visible VRAM diff --git a/drivers/gpu/drm/amd/amdgpu/cik.c b/drivers/gpu/drm/amd/amdgpu/cik.c index 03ff8bd1fee8..5442df094102 100644 --- a/drivers/gpu/drm/amd/amdgpu/cik.c +++ b/drivers/gpu/drm/amd/amdgpu/cik.c @@ -1336,11 +1336,13 @@ cik_asic_reset_method(struct amdgpu_device *adev) switch (adev->asic_type) { case CHIP_BONAIRE: - case CHIP_HAWAII: /* disable baco reset until it works */ /* smu7_asic_get_baco_capability(adev, &baco_reset); */ baco_reset = false; break; + case CHIP_HAWAII: + baco_reset = cik_asic_supports_baco(adev); + break; default: baco_reset = false; break; diff --git a/drivers/gpu/drm/amd/amdgpu/cik_sdma.c b/drivers/gpu/drm/amd/amdgpu/cik_sdma.c index 20f108818b2b..a3c3fe96515f 100644 --- a/drivers/gpu/drm/amd/amdgpu/cik_sdma.c +++ b/drivers/gpu/drm/amd/amdgpu/cik_sdma.c @@ -1071,22 +1071,19 @@ static int cik_sdma_soft_reset(void *handle) { u32 srbm_soft_reset = 0; struct amdgpu_device *adev = (struct amdgpu_device *)handle; - u32 tmp = RREG32(mmSRBM_STATUS2); + u32 tmp; - if (tmp & SRBM_STATUS2__SDMA_BUSY_MASK) { - /* sdma0 */ - tmp = RREG32(mmSDMA0_F32_CNTL + SDMA0_REGISTER_OFFSET); - tmp |= SDMA0_F32_CNTL__HALT_MASK; - WREG32(mmSDMA0_F32_CNTL + SDMA0_REGISTER_OFFSET, tmp); - srbm_soft_reset |= SRBM_SOFT_RESET__SOFT_RESET_SDMA_MASK; - } - if (tmp & SRBM_STATUS2__SDMA1_BUSY_MASK) { - /* sdma1 */ - tmp = RREG32(mmSDMA0_F32_CNTL + SDMA1_REGISTER_OFFSET); - tmp |= SDMA0_F32_CNTL__HALT_MASK; - WREG32(mmSDMA0_F32_CNTL + SDMA1_REGISTER_OFFSET, tmp); - srbm_soft_reset |= SRBM_SOFT_RESET__SOFT_RESET_SDMA1_MASK; - } + /* sdma0 */ + tmp = RREG32(mmSDMA0_F32_CNTL + SDMA0_REGISTER_OFFSET); + tmp |= SDMA0_F32_CNTL__HALT_MASK; + WREG32(mmSDMA0_F32_CNTL + SDMA0_REGISTER_OFFSET, tmp); + srbm_soft_reset |= SRBM_SOFT_RESET__SOFT_RESET_SDMA_MASK; + + /* sdma1 */ + tmp = RREG32(mmSDMA0_F32_CNTL + SDMA1_REGISTER_OFFSET); + tmp |= SDMA0_F32_CNTL__HALT_MASK; + WREG32(mmSDMA0_F32_CNTL + SDMA1_REGISTER_OFFSET, tmp); + srbm_soft_reset |= SRBM_SOFT_RESET__SOFT_RESET_SDMA1_MASK; if (srbm_soft_reset) { tmp = RREG32(mmSRBM_SOFT_RESET); diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c index 56fdbe626d30..3579565e0eab 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c @@ -128,6 +128,9 @@ #define PA_SC_ENHANCE_3__FORCE_PBB_WORKLOAD_MODE_TO_ZERO__SHIFT 0x3 #define PA_SC_ENHANCE_3__FORCE_PBB_WORKLOAD_MODE_TO_ZERO_MASK 0x00000008L +#define mmCGTT_SPI_CS_CLK_CTRL 0x507c +#define mmCGTT_SPI_CS_CLK_CTRL_BASE_IDX 1 + MODULE_FIRMWARE("amdgpu/navi10_ce.bin"); MODULE_FIRMWARE("amdgpu/navi10_pfp.bin"); MODULE_FIRMWARE("amdgpu/navi10_me.bin"); @@ -3094,6 +3097,7 @@ static const struct soc15_reg_golden golden_settings_gc_rlc_spm_10_1_2_nv12[] = static const struct soc15_reg_golden golden_settings_gc_10_3[] = { + SOC15_REG_GOLDEN_VALUE(GC, 0, mmCGTT_SPI_CS_CLK_CTRL, 0x78000000, 0x78000100), SOC15_REG_GOLDEN_VALUE(GC, 0, mmCGTT_SPI_PS_CLK_CTRL, 0xff7f0fff, 0x78000100), SOC15_REG_GOLDEN_VALUE(GC, 0, mmCGTT_SPI_RA0_CLK_CTRL, 0xff7f0fff, 0x30000100), SOC15_REG_GOLDEN_VALUE(GC, 0, mmCGTT_SPI_RA1_CLK_CTRL, 0xff7f0fff, 0x7e000100), diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index 6959aebae6d4..0d8e203b10ef 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -117,6 +117,13 @@ MODULE_FIRMWARE("amdgpu/renoir_mec.bin"); MODULE_FIRMWARE("amdgpu/renoir_mec2.bin"); MODULE_FIRMWARE("amdgpu/renoir_rlc.bin"); +MODULE_FIRMWARE("amdgpu/green_sardine_ce.bin"); +MODULE_FIRMWARE("amdgpu/green_sardine_pfp.bin"); +MODULE_FIRMWARE("amdgpu/green_sardine_me.bin"); +MODULE_FIRMWARE("amdgpu/green_sardine_mec.bin"); +MODULE_FIRMWARE("amdgpu/green_sardine_mec2.bin"); +MODULE_FIRMWARE("amdgpu/green_sardine_rlc.bin"); + #define mmTCP_CHAN_STEER_0_ARCT 0x0b03 #define mmTCP_CHAN_STEER_0_ARCT_BASE_IDX 0 #define mmTCP_CHAN_STEER_1_ARCT 0x0b04 @@ -1630,7 +1637,10 @@ static int gfx_v9_0_init_microcode(struct amdgpu_device *adev) chip_name = "arcturus"; break; case CHIP_RENOIR: - chip_name = "renoir"; + if (adev->apu_flags & AMD_APU_IS_RENOIR) + chip_name = "renoir"; + else + chip_name = "green_sardine"; break; default: BUG(); diff --git a/drivers/gpu/drm/amd/amdgpu/nv.c b/drivers/gpu/drm/amd/amdgpu/nv.c index 1ce741a0c6a7..d5715c1d177b 100644 --- a/drivers/gpu/drm/amd/amdgpu/nv.c +++ b/drivers/gpu/drm/amd/amdgpu/nv.c @@ -455,6 +455,15 @@ void nv_set_virt_ops(struct amdgpu_device *adev) adev->virt.ops = &xgpu_nv_virt_ops; } +static bool nv_is_headless_sku(struct pci_dev *pdev) +{ + if ((pdev->device == 0x731E && + (pdev->revision == 0xC6 || pdev->revision == 0xC7)) || + (pdev->device == 0x7340 && pdev->revision == 0xC9)) + return true; + return false; +} + int nv_set_ip_blocks(struct amdgpu_device *adev) { int r; @@ -483,7 +492,8 @@ int nv_set_ip_blocks(struct amdgpu_device *adev) if (adev->enable_virtual_display || amdgpu_sriov_vf(adev)) amdgpu_device_ip_block_add(adev, &dce_virtual_ip_block); #if defined(CONFIG_DRM_AMD_DC) - else if (amdgpu_device_has_dc_support(adev)) + else if (amdgpu_device_has_dc_support(adev) && + !nv_is_headless_sku(adev->pdev)) amdgpu_device_ip_block_add(adev, &dm_ip_block); #endif amdgpu_device_ip_block_add(adev, &gfx_v10_0_ip_block); @@ -491,7 +501,8 @@ int nv_set_ip_blocks(struct amdgpu_device *adev) if (adev->firmware.load_type == AMDGPU_FW_LOAD_DIRECT && !amdgpu_sriov_vf(adev)) amdgpu_device_ip_block_add(adev, &smu_v11_0_ip_block); - amdgpu_device_ip_block_add(adev, &vcn_v2_0_ip_block); + if (!nv_is_headless_sku(adev->pdev)) + amdgpu_device_ip_block_add(adev, &vcn_v2_0_ip_block); amdgpu_device_ip_block_add(adev, &jpeg_v2_0_ip_block); if (adev->enable_mes) amdgpu_device_ip_block_add(adev, &mes_v10_1_ip_block); diff --git a/drivers/gpu/drm/amd/amdgpu/psp_v12_0.c b/drivers/gpu/drm/amd/amdgpu/psp_v12_0.c index 75489313dbad..dff5c15b4858 100644 --- a/drivers/gpu/drm/amd/amdgpu/psp_v12_0.c +++ b/drivers/gpu/drm/amd/amdgpu/psp_v12_0.c @@ -39,6 +39,7 @@ MODULE_FIRMWARE("amdgpu/renoir_asd.bin"); MODULE_FIRMWARE("amdgpu/renoir_ta.bin"); +MODULE_FIRMWARE("amdgpu/green_sardine_asd.bin"); /* address block */ #define smnMP1_FIRMWARE_FLAGS 0x3010024 @@ -54,7 +55,10 @@ static int psp_v12_0_init_microcode(struct psp_context *psp) switch (adev->asic_type) { case CHIP_RENOIR: - chip_name = "renoir"; + if (adev->apu_flags & AMD_APU_IS_RENOIR) + chip_name = "renoir"; + else + chip_name = "green_sardine"; break; default: BUG(); diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c index 86fb1eddf5a6..e82f49f62f6e 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c @@ -69,6 +69,7 @@ MODULE_FIRMWARE("amdgpu/picasso_sdma.bin"); MODULE_FIRMWARE("amdgpu/raven2_sdma.bin"); MODULE_FIRMWARE("amdgpu/arcturus_sdma.bin"); MODULE_FIRMWARE("amdgpu/renoir_sdma.bin"); +MODULE_FIRMWARE("amdgpu/green_sardine_sdma.bin"); #define SDMA0_POWER_CNTL__ON_OFF_CONDITION_HOLD_TIME_MASK 0x000000F8L #define SDMA0_POWER_CNTL__ON_OFF_STATUS_DURATION_TIME_MASK 0xFC000000L @@ -619,7 +620,10 @@ static int sdma_v4_0_init_microcode(struct amdgpu_device *adev) chip_name = "arcturus"; break; case CHIP_RENOIR: - chip_name = "renoir"; + if (adev->apu_flags & AMD_APU_IS_RENOIR) + chip_name = "renoir"; + else + chip_name = "green_sardine"; break; default: BUG(); diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c b/drivers/gpu/drm/amd/amdgpu/soc15.c index afcccc6c0fc6..f57c5f57efa8 100644 --- a/drivers/gpu/drm/amd/amdgpu/soc15.c +++ b/drivers/gpu/drm/amd/amdgpu/soc15.c @@ -1195,8 +1195,7 @@ static int soc15_common_early_init(void *handle) adev->pg_flags = AMD_PG_SUPPORT_SDMA | AMD_PG_SUPPORT_MMHUB | - AMD_PG_SUPPORT_VCN | - AMD_PG_SUPPORT_VCN_DPG; + AMD_PG_SUPPORT_VCN; } else { adev->cg_flags = AMD_CG_SUPPORT_GFX_MGCG | AMD_CG_SUPPORT_GFX_MGLS | @@ -1243,7 +1242,15 @@ static int soc15_common_early_init(void *handle) break; case CHIP_RENOIR: adev->asic_funcs = &soc15_asic_funcs; - adev->apu_flags |= AMD_APU_IS_RENOIR; + if (adev->pdev->device == 0x1636) + adev->apu_flags |= AMD_APU_IS_RENOIR; + else + adev->apu_flags |= AMD_APU_IS_GREEN_SARDINE; + + if (adev->apu_flags & AMD_APU_IS_RENOIR) + adev->external_rev_id = adev->rev_id + 0x91; + else + adev->external_rev_id = adev->rev_id + 0xa1; adev->cg_flags = AMD_CG_SUPPORT_GFX_MGCG | AMD_CG_SUPPORT_GFX_MGLS | AMD_CG_SUPPORT_GFX_3D_CGCG | @@ -1268,7 +1275,6 @@ static int soc15_common_early_init(void *handle) AMD_PG_SUPPORT_VCN | AMD_PG_SUPPORT_JPEG | AMD_PG_SUPPORT_VCN_DPG; - adev->external_rev_id = adev->rev_id + 0x91; break; default: /* FIXME: not supported yet */ diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_crat.c b/drivers/gpu/drm/amd/amdkfd/kfd_crat.c index 5e2254b9e931..3de5e14c5ae3 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_crat.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_crat.c @@ -798,10 +798,10 @@ int kfd_create_crat_image_acpi(void **crat_image, size_t *size) } pcrat_image = kvmalloc(crat_table->length, GFP_KERNEL); - memcpy(pcrat_image, crat_table, crat_table->length); if (!pcrat_image) return -ENOMEM; + memcpy(pcrat_image, crat_table, crat_table->length); *crat_image = pcrat_image; *size = crat_table->length; diff --git a/drivers/gpu/drm/amd/display/Kconfig b/drivers/gpu/drm/amd/display/Kconfig index f24abf428534..60dfdd432aba 100644 --- a/drivers/gpu/drm/amd/display/Kconfig +++ b/drivers/gpu/drm/amd/display/Kconfig @@ -42,6 +42,7 @@ config DRM_AMD_DC_SI config DEBUG_KERNEL_DC bool "Enable kgdb break in DC" depends on DRM_AMD_DC + depends on KGDB help Choose this option if you want to hit kdgb_break in assert. diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index e2b23486ba4c..e93e18c06c0e 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -100,6 +100,8 @@ MODULE_FIRMWARE(FIRMWARE_SIENNA_CICHLID_DMUB); #define FIRMWARE_NAVY_FLOUNDER_DMUB "amdgpu/navy_flounder_dmcub.bin" MODULE_FIRMWARE(FIRMWARE_NAVY_FLOUNDER_DMUB); #endif +#define FIRMWARE_GREEN_SARDINE_DMUB "amdgpu/green_sardine_dmcub.bin" +MODULE_FIRMWARE(FIRMWARE_GREEN_SARDINE_DMUB); #define FIRMWARE_RAVEN_DMCU "amdgpu/raven_dmcu.bin" MODULE_FIRMWARE(FIRMWARE_RAVEN_DMCU); @@ -583,7 +585,7 @@ static void amdgpu_dm_fbc_init(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct amdgpu_device *adev = drm_to_adev(dev); - struct dm_comressor_info *compressor = &adev->dm.compressor; + struct dm_compressor_info *compressor = &adev->dm.compressor; struct amdgpu_dm_connector *aconn = to_amdgpu_dm_connector(connector); struct drm_display_mode *mode; unsigned long max_size = 0; @@ -973,6 +975,8 @@ static int amdgpu_dm_init(struct amdgpu_device *adev) case CHIP_RAVEN: case CHIP_RENOIR: init_data.flags.gpu_vm_support = true; + if (ASICREV_IS_GREEN_SARDINE(adev->external_rev_id)) + init_data.flags.disable_dmcu = true; break; default: break; @@ -1267,6 +1271,8 @@ static int dm_dmub_sw_init(struct amdgpu_device *adev) case CHIP_RENOIR: dmub_asic = DMUB_ASIC_DCN21; fw_name_dmub = FIRMWARE_RENOIR_DMUB; + if (ASICREV_IS_GREEN_SARDINE(adev->external_rev_id)) + fw_name_dmub = FIRMWARE_GREEN_SARDINE_DMUB; break; #if defined(CONFIG_DRM_AMD_DC_DCN3_0) case CHIP_SIENNA_CICHLID: diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h index 34f6369bf51f..a8a0e8cb1a11 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h @@ -86,7 +86,7 @@ struct irq_list_head { * @bo_ptr: Pointer to the buffer object * @gpu_addr: MMIO gpu addr */ -struct dm_comressor_info { +struct dm_compressor_info { void *cpu_addr; struct amdgpu_bo *bo_ptr; uint64_t gpu_addr; @@ -148,7 +148,7 @@ struct amdgpu_dm_backlight_caps { * @soc_bounding_box: SOC bounding box values provided by gpu_info FW * @cached_state: Caches device atomic state for suspend/resume * @cached_dc_state: Cached state of content streams - * @compressor: Frame buffer compression buffer. See &struct dm_comressor_info + * @compressor: Frame buffer compression buffer. See &struct dm_compressor_info * @force_timing_sync: set via debugfs. When set, indicates that all connected * displays will be forced to synchronize. */ @@ -324,7 +324,7 @@ struct amdgpu_display_manager { struct drm_atomic_state *cached_state; struct dc_state *cached_dc_state; - struct dm_comressor_info compressor; + struct dm_compressor_info compressor; const struct firmware *fw_dmcu; uint32_t dmcu_fw_version; diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c index efb909ef7a0f..857f156e4985 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c @@ -166,6 +166,11 @@ struct clk_mgr *dc_clk_mgr_create(struct dc_context *ctx, struct pp_smu_funcs *p rn_clk_mgr_construct(ctx, clk_mgr, pp_smu, dccg); break; } + + if (ASICREV_IS_GREEN_SARDINE(asic_id.hw_internal_rev)) { + rn_clk_mgr_construct(ctx, clk_mgr, pp_smu, dccg); + break; + } if (ASICREV_IS_RAVEN2(asic_id.hw_internal_rev)) { rv2_clk_mgr_construct(ctx, clk_mgr, pp_smu); break; diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index 1eb29c362122..45ad05f6e03b 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -1571,8 +1571,8 @@ static void init_state(struct dc *dc, struct dc_state *context) struct dc_state *dc_create_state(struct dc *dc) { - struct dc_state *context = kzalloc(sizeof(struct dc_state), - GFP_KERNEL); + struct dc_state *context = kvzalloc(sizeof(struct dc_state), + GFP_KERNEL); if (!context) return NULL; diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c index e430148e47cf..59d48cf819ea 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c @@ -120,6 +120,8 @@ enum dce_version resource_parse_asic_id(struct hw_asic_id asic_id) dc_version = DCN_VERSION_1_01; if (ASICREV_IS_RENOIR(asic_id.hw_internal_rev)) dc_version = DCN_VERSION_2_1; + if (ASICREV_IS_GREEN_SARDINE(asic_id.hw_internal_rev)) + dc_version = DCN_VERSION_2_1; break; #endif diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c index 9cc65dc1970f..49ae5ff12da6 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c @@ -1149,7 +1149,8 @@ static uint32_t dcn3_get_pix_clk_dividers( static const struct clock_source_funcs dcn3_clk_src_funcs = { .cs_power_down = dce110_clock_source_power_down, .program_pix_clk = dcn3_program_pix_clk, - .get_pix_clk_dividers = dcn3_get_pix_clk_dividers + .get_pix_clk_dividers = dcn3_get_pix_clk_dividers, + .get_pixel_clk_frequency_100hz = get_pixel_clk_frequency_100hz }; #endif /*****************************************/ diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c index 24fb39a11e5d..2455d210ccf6 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c @@ -2105,12 +2105,12 @@ static bool dcn30_internal_validate_bw( if (split[i]) { if (odm) { - if (split[i] == 4 && old_pipe->next_odm_pipe->next_odm_pipe) + if (split[i] == 4 && old_pipe->next_odm_pipe && old_pipe->next_odm_pipe->next_odm_pipe) old_index = old_pipe->next_odm_pipe->next_odm_pipe->pipe_idx; else if (old_pipe->next_odm_pipe) old_index = old_pipe->next_odm_pipe->pipe_idx; } else { - if (split[i] == 4 && old_pipe->bottom_pipe->bottom_pipe && + if (split[i] == 4 && old_pipe->bottom_pipe && old_pipe->bottom_pipe->bottom_pipe && old_pipe->bottom_pipe->bottom_pipe->plane_state == old_pipe->plane_state) old_index = old_pipe->bottom_pipe->bottom_pipe->pipe_idx; else if (old_pipe->bottom_pipe && @@ -2150,10 +2150,12 @@ static bool dcn30_internal_validate_bw( goto validate_fail; newly_split[pipe_4to1->pipe_idx] = true; - if (odm && old_pipe->next_odm_pipe->next_odm_pipe->next_odm_pipe) + if (odm && old_pipe->next_odm_pipe && old_pipe->next_odm_pipe->next_odm_pipe + && old_pipe->next_odm_pipe->next_odm_pipe->next_odm_pipe) old_index = old_pipe->next_odm_pipe->next_odm_pipe->next_odm_pipe->pipe_idx; - else if (!odm && old_pipe->bottom_pipe->bottom_pipe->bottom_pipe && - old_pipe->bottom_pipe->bottom_pipe->bottom_pipe->plane_state == old_pipe->plane_state) + else if (!odm && old_pipe->bottom_pipe && old_pipe->bottom_pipe->bottom_pipe && + old_pipe->bottom_pipe->bottom_pipe->bottom_pipe && + old_pipe->bottom_pipe->bottom_pipe->bottom_pipe->plane_state == old_pipe->plane_state) old_index = old_pipe->bottom_pipe->bottom_pipe->bottom_pipe->pipe_idx; else old_index = -1; diff --git a/drivers/gpu/drm/amd/display/dc/gpio/dcn30/hw_factory_dcn30.c b/drivers/gpu/drm/amd/display/dc/gpio/dcn30/hw_factory_dcn30.c index 3be2c90b0c61..21583699f992 100644 --- a/drivers/gpu/drm/amd/display/dc/gpio/dcn30/hw_factory_dcn30.c +++ b/drivers/gpu/drm/amd/display/dc/gpio/dcn30/hw_factory_dcn30.c @@ -117,6 +117,12 @@ static const struct ddc_registers ddc_data_regs_dcn[] = { ddc_data_regs_dcn2(4), ddc_data_regs_dcn2(5), ddc_data_regs_dcn2(6), + { + DDC_GPIO_VGA_REG_LIST(DATA), + .ddc_setup = 0, + .phy_aux_cntl = 0, + .dc_gpio_aux_ctrl_5 = 0 + } }; static const struct ddc_registers ddc_clk_regs_dcn[] = { @@ -126,6 +132,12 @@ static const struct ddc_registers ddc_clk_regs_dcn[] = { ddc_clk_regs_dcn2(4), ddc_clk_regs_dcn2(5), ddc_clk_regs_dcn2(6), + { + DDC_GPIO_VGA_REG_LIST(CLK), + .ddc_setup = 0, + .phy_aux_cntl = 0, + .dc_gpio_aux_ctrl_5 = 0 + } }; static const struct ddc_sh_mask ddc_shift[] = { diff --git a/drivers/gpu/drm/amd/display/dc/gpio/gpio_base.c b/drivers/gpu/drm/amd/display/dc/gpio/gpio_base.c index f67c18375bfd..dac427b68fd7 100644 --- a/drivers/gpu/drm/amd/display/dc/gpio/gpio_base.c +++ b/drivers/gpu/drm/amd/display/dc/gpio/gpio_base.c @@ -63,13 +63,13 @@ enum gpio_result dal_gpio_open_ex( enum gpio_mode mode) { if (gpio->pin) { - ASSERT_CRITICAL(false); + BREAK_TO_DEBUGGER(); return GPIO_RESULT_ALREADY_OPENED; } // No action if allocation failed during gpio construct if (!gpio->hw_container.ddc) { - ASSERT_CRITICAL(false); + BREAK_TO_DEBUGGER(); return GPIO_RESULT_NON_SPECIFIC_ERROR; } gpio->mode = mode; diff --git a/drivers/gpu/drm/amd/display/dc/os_types.h b/drivers/gpu/drm/amd/display/dc/os_types.h index 330acaaed79a..95cb56929e79 100644 --- a/drivers/gpu/drm/amd/display/dc/os_types.h +++ b/drivers/gpu/drm/amd/display/dc/os_types.h @@ -94,36 +94,27 @@ * general debug capabilities * */ -#if defined(CONFIG_HAVE_KGDB) || defined(CONFIG_KGDB) -#define ASSERT_CRITICAL(expr) do { \ - if (WARN_ON(!(expr))) { \ - kgdb_breakpoint(); \ - } \ -} while (0) +#ifdef CONFIG_DEBUG_KERNEL_DC +#define dc_breakpoint() kgdb_breakpoint() #else -#define ASSERT_CRITICAL(expr) do { \ - if (WARN_ON(!(expr))) { \ - ; \ - } \ -} while (0) +#define dc_breakpoint() do {} while (0) #endif -#if defined(CONFIG_DEBUG_KERNEL_DC) -#define ASSERT(expr) ASSERT_CRITICAL(expr) +#define ASSERT_CRITICAL(expr) do { \ + if (WARN_ON(!(expr))) \ + dc_breakpoint(); \ + } while (0) -#else -#define ASSERT(expr) WARN_ON_ONCE(!(expr)) -#endif +#define ASSERT(expr) do { \ + if (WARN_ON_ONCE(!(expr))) \ + dc_breakpoint(); \ + } while (0) -#if defined(CONFIG_DEBUG_KERNEL_DC) && (defined(CONFIG_HAVE_KGDB) || defined(CONFIG_KGDB)) #define BREAK_TO_DEBUGGER() \ do { \ DRM_DEBUG_DRIVER("%s():%d\n", __func__, __LINE__); \ - kgdb_breakpoint(); \ + dc_breakpoint(); \ } while (0) -#else -#define BREAK_TO_DEBUGGER() DRM_DEBUG_DRIVER("%s():%d\n", __func__, __LINE__) -#endif #define DC_ERR(...) do { \ dm_error(__VA_ARGS__); \ diff --git a/drivers/gpu/drm/amd/display/include/dal_asic_id.h b/drivers/gpu/drm/amd/display/include/dal_asic_id.h index b267987aed06..ffcb059297d3 100644 --- a/drivers/gpu/drm/amd/display/include/dal_asic_id.h +++ b/drivers/gpu/drm/amd/display/include/dal_asic_id.h @@ -205,6 +205,10 @@ enum { #if defined(CONFIG_DRM_AMD_DC_DCN3_0) #define ASICREV_IS_SIENNA_CICHLID_P(eChipRev) ((eChipRev >= NV_SIENNA_CICHLID_P_A0)) #endif +#define GREEN_SARDINE_A0 0xA1 +#ifndef ASICREV_IS_GREEN_SARDINE +#define ASICREV_IS_GREEN_SARDINE(eChipRev) ((eChipRev >= GREEN_SARDINE_A0) && (eChipRev < 0xFF)) +#endif /* * ASIC chip ID diff --git a/drivers/gpu/drm/amd/include/amd_shared.h b/drivers/gpu/drm/amd/include/amd_shared.h index 10dc481ecbc4..06c1aabf10ce 100644 --- a/drivers/gpu/drm/amd/include/amd_shared.h +++ b/drivers/gpu/drm/amd/include/amd_shared.h @@ -45,6 +45,7 @@ enum amd_apu_flags { AMD_APU_IS_RAVEN2 = 0x00000002UL, AMD_APU_IS_PICASSO = 0x00000004UL, AMD_APU_IS_RENOIR = 0x00000008UL, + AMD_APU_IS_GREEN_SARDINE = 0x00000010UL, }; /** diff --git a/drivers/gpu/drm/amd/pm/inc/hwmgr.h b/drivers/gpu/drm/amd/pm/inc/hwmgr.h index 3898a95ec28b..518796a26eda 100644 --- a/drivers/gpu/drm/amd/pm/inc/hwmgr.h +++ b/drivers/gpu/drm/amd/pm/inc/hwmgr.h @@ -229,6 +229,7 @@ struct pp_smumgr_func { bool (*is_hw_avfs_present)(struct pp_hwmgr *hwmgr); int (*update_dpm_settings)(struct pp_hwmgr *hwmgr, void *profile_setting); int (*smc_table_manager)(struct pp_hwmgr *hwmgr, uint8_t *table, uint16_t table_id, bool rw); /*rw: true for read, false for write */ + int (*stop_smc)(struct pp_hwmgr *hwmgr); }; struct pp_hwmgr_func { diff --git a/drivers/gpu/drm/amd/pm/inc/smumgr.h b/drivers/gpu/drm/amd/pm/inc/smumgr.h index ad100b533d04..5f46f1a4f38e 100644 --- a/drivers/gpu/drm/amd/pm/inc/smumgr.h +++ b/drivers/gpu/drm/amd/pm/inc/smumgr.h @@ -113,4 +113,6 @@ extern int smum_update_dpm_settings(struct pp_hwmgr *hwmgr, void *profile_settin extern int smum_smc_table_manager(struct pp_hwmgr *hwmgr, uint8_t *table, uint16_t table_id, bool rw); +extern int smum_stop_smc(struct pp_hwmgr *hwmgr); + #endif diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/ci_baco.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/ci_baco.c index 3be40114e63d..45f608838f6e 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/ci_baco.c +++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/ci_baco.c @@ -142,12 +142,12 @@ static const struct baco_cmd_entry exit_baco_tbl[] = { CMD_READMODIFYWRITE, mmBACO_CNTL, BACO_CNTL__BACO_BCLK_OFF_MASK, BACO_CNTL__BACO_BCLK_OFF__SHIFT, 0, 0x00 }, { CMD_READMODIFYWRITE, mmBACO_CNTL, BACO_CNTL__BACO_POWER_OFF_MASK, BACO_CNTL__BACO_POWER_OFF__SHIFT, 0, 0x00 }, { CMD_DELAY_MS, 0, 0, 0, 20, 0 }, - { CMD_WAITFOR, mmBACO_CNTL, BACO_CNTL__PWRGOOD_BF_MASK, 0, 0xffffffff, 0x20 }, + { CMD_WAITFOR, mmBACO_CNTL, BACO_CNTL__PWRGOOD_BF_MASK, 0, 0xffffffff, 0x200 }, { CMD_READMODIFYWRITE, mmBACO_CNTL, BACO_CNTL__BACO_ISO_DIS_MASK, BACO_CNTL__BACO_ISO_DIS__SHIFT, 0, 0x01 }, - { CMD_WAITFOR, mmBACO_CNTL, BACO_CNTL__PWRGOOD_MASK, 0, 5, 0x1c }, + { CMD_WAITFOR, mmBACO_CNTL, BACO_CNTL__PWRGOOD_MASK, 0, 5, 0x1c00 }, { CMD_READMODIFYWRITE, mmBACO_CNTL, BACO_CNTL__BACO_ANA_ISO_DIS_MASK, BACO_CNTL__BACO_ANA_ISO_DIS__SHIFT, 0, 0x01 }, { CMD_READMODIFYWRITE, mmBACO_CNTL, BACO_CNTL__BACO_RESET_EN_MASK, BACO_CNTL__BACO_RESET_EN__SHIFT, 0, 0x00 }, - { CMD_WAITFOR, mmBACO_CNTL, BACO_CNTL__RCU_BIF_CONFIG_DONE_MASK, 0, 5, 0x10 }, + { CMD_WAITFOR, mmBACO_CNTL, BACO_CNTL__RCU_BIF_CONFIG_DONE_MASK, 0, 5, 0x100 }, { CMD_READMODIFYWRITE, mmBACO_CNTL, BACO_CNTL__BACO_EN_MASK, BACO_CNTL__BACO_EN__SHIFT, 0, 0x00 }, { CMD_WAITFOR, mmBACO_CNTL, BACO_CNTL__BACO_MODE_MASK, 0, 0xffffffff, 0x00 } }; @@ -155,6 +155,7 @@ static const struct baco_cmd_entry exit_baco_tbl[] = static const struct baco_cmd_entry clean_baco_tbl[] = { { CMD_WRITE, mmBIOS_SCRATCH_6, 0, 0, 0, 0 }, + { CMD_WRITE, mmBIOS_SCRATCH_7, 0, 0, 0, 0 }, { CMD_WRITE, mmCP_PFP_UCODE_ADDR, 0, 0, 0, 0 } }; diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c index 1e8919b0acdb..35629140fc7a 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c @@ -1541,6 +1541,10 @@ static int smu7_disable_dpm_tasks(struct pp_hwmgr *hwmgr) PP_ASSERT_WITH_CODE((tmp_result == 0), "Failed to reset to default!", result = tmp_result); + tmp_result = smum_stop_smc(hwmgr); + PP_ASSERT_WITH_CODE((tmp_result == 0), + "Failed to stop smc!", result = tmp_result); + tmp_result = smu7_force_switch_to_arbf0(hwmgr); PP_ASSERT_WITH_CODE((tmp_result == 0), "Failed to force to switch arbf0!", result = tmp_result); @@ -1585,18 +1589,24 @@ static void smu7_init_dpm_defaults(struct pp_hwmgr *hwmgr) data->current_profile_setting.sclk_down_hyst = 100; data->current_profile_setting.sclk_activity = SMU7_SCLK_TARGETACTIVITY_DFLT; data->current_profile_setting.bupdate_mclk = 1; - if (adev->gmc.vram_width == 256) { - data->current_profile_setting.mclk_up_hyst = 10; - data->current_profile_setting.mclk_down_hyst = 60; - data->current_profile_setting.mclk_activity = 25; - } else if (adev->gmc.vram_width == 128) { - data->current_profile_setting.mclk_up_hyst = 5; - data->current_profile_setting.mclk_down_hyst = 16; - data->current_profile_setting.mclk_activity = 20; - } else if (adev->gmc.vram_width == 64) { - data->current_profile_setting.mclk_up_hyst = 3; - data->current_profile_setting.mclk_down_hyst = 16; - data->current_profile_setting.mclk_activity = 20; + if (hwmgr->chip_id >= CHIP_POLARIS10) { + if (adev->gmc.vram_width == 256) { + data->current_profile_setting.mclk_up_hyst = 10; + data->current_profile_setting.mclk_down_hyst = 60; + data->current_profile_setting.mclk_activity = 25; + } else if (adev->gmc.vram_width == 128) { + data->current_profile_setting.mclk_up_hyst = 5; + data->current_profile_setting.mclk_down_hyst = 16; + data->current_profile_setting.mclk_activity = 20; + } else if (adev->gmc.vram_width == 64) { + data->current_profile_setting.mclk_up_hyst = 3; + data->current_profile_setting.mclk_down_hyst = 16; + data->current_profile_setting.mclk_activity = 20; + } + } else { + data->current_profile_setting.mclk_up_hyst = 0; + data->current_profile_setting.mclk_down_hyst = 100; + data->current_profile_setting.mclk_activity = SMU7_MCLK_TARGETACTIVITY_DFLT; } hwmgr->workload_mask = 1 << hwmgr->workload_prority[PP_SMC_POWER_PROFILE_FULLSCREEN3D]; hwmgr->power_profile_mode = PP_SMC_POWER_PROFILE_FULLSCREEN3D; diff --git a/drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c b/drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c index e4d1f3d66ef4..329bf4d44bbc 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c +++ b/drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c @@ -2726,10 +2726,7 @@ static int ci_initialize_mc_reg_table(struct pp_hwmgr *hwmgr) static bool ci_is_dpm_running(struct pp_hwmgr *hwmgr) { - return (1 == PHM_READ_INDIRECT_FIELD(hwmgr->device, - CGS_IND_REG__SMC, FEATURE_STATUS, - VOLTAGE_CONTROLLER_ON)) - ? true : false; + return ci_is_smc_ram_running(hwmgr); } static int ci_smu_init(struct pp_hwmgr *hwmgr) @@ -2939,6 +2936,29 @@ static int ci_update_smc_table(struct pp_hwmgr *hwmgr, uint32_t type) return 0; } +static void ci_reset_smc(struct pp_hwmgr *hwmgr) +{ + PHM_WRITE_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + SMC_SYSCON_RESET_CNTL, + rst_reg, 1); +} + + +static void ci_stop_smc_clock(struct pp_hwmgr *hwmgr) +{ + PHM_WRITE_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + SMC_SYSCON_CLOCK_CNTL_0, + ck_disable, 1); +} + +static int ci_stop_smc(struct pp_hwmgr *hwmgr) +{ + ci_reset_smc(hwmgr); + ci_stop_smc_clock(hwmgr); + + return 0; +} + const struct pp_smumgr_func ci_smu_funcs = { .name = "ci_smu", .smu_init = ci_smu_init, @@ -2964,4 +2984,5 @@ const struct pp_smumgr_func ci_smu_funcs = { .is_dpm_running = ci_is_dpm_running, .update_dpm_settings = ci_update_dpm_settings, .update_smc_table = ci_update_smc_table, + .stop_smc = ci_stop_smc, }; diff --git a/drivers/gpu/drm/amd/pm/powerplay/smumgr/smumgr.c b/drivers/gpu/drm/amd/pm/powerplay/smumgr/smumgr.c index b6fb48066841..b6921db3c130 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/smumgr/smumgr.c +++ b/drivers/gpu/drm/amd/pm/powerplay/smumgr/smumgr.c @@ -245,3 +245,11 @@ int smum_smc_table_manager(struct pp_hwmgr *hwmgr, uint8_t *table, uint16_t tabl return -EINVAL; } + +int smum_stop_smc(struct pp_hwmgr *hwmgr) +{ + if (hwmgr->smumgr_funcs->stop_smc) + return hwmgr->smumgr_funcs->stop_smc(hwmgr); + + return 0; +} diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c index fc4f95fa87cf..b1e5ec01527b 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c +++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c @@ -1029,17 +1029,6 @@ static int smu_smc_hw_setup(struct smu_context *smu) return ret; } - /* - * Set initialized values (get from vbios) to dpm tables context such as - * gfxclk, memclk, dcefclk, and etc. And enable the DPM feature for each - * type of clks. - */ - ret = smu_set_default_dpm_table(smu); - if (ret) { - dev_err(adev->dev, "Failed to setup default dpm clock tables!\n"); - return ret; - } - ret = smu_notify_display_change(smu); if (ret) return ret; diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c index 8d8081c6bd38..ef1a62e86a0e 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c @@ -1361,14 +1361,9 @@ static int navi10_get_fan_speed_rpm(struct smu_context *smu, if (!speed) return -EINVAL; - switch (smu_v11_0_get_fan_control_mode(smu)) { - case AMD_FAN_CTRL_AUTO: - return navi10_get_smu_metrics_data(smu, - METRICS_CURR_FANSPEED, - speed); - default: - return smu_v11_0_get_fan_speed_rpm(smu, speed); - } + return navi10_get_smu_metrics_data(smu, + METRICS_CURR_FANSPEED, + speed); } static int navi10_get_fan_parameters(struct smu_context *smu) @@ -2534,29 +2529,6 @@ static const struct i2c_algorithm navi10_i2c_algo = { .functionality = navi10_i2c_func, }; -static int navi10_i2c_control_init(struct smu_context *smu, struct i2c_adapter *control) -{ - struct amdgpu_device *adev = to_amdgpu_device(control); - int res; - - control->owner = THIS_MODULE; - control->class = I2C_CLASS_SPD; - control->dev.parent = &adev->pdev->dev; - control->algo = &navi10_i2c_algo; - snprintf(control->name, sizeof(control->name), "AMDGPU SMU"); - - res = i2c_add_adapter(control); - if (res) - DRM_ERROR("Failed to register hw i2c, err: %d\n", res); - - return res; -} - -static void navi10_i2c_control_fini(struct smu_context *smu, struct i2c_adapter *control) -{ - i2c_del_adapter(control); -} - static ssize_t navi10_get_gpu_metrics(struct smu_context *smu, void **table) { @@ -2687,8 +2659,6 @@ static const struct pptable_funcs navi10_ppt_funcs = { .set_default_dpm_table = navi10_set_default_dpm_table, .dpm_set_vcn_enable = navi10_dpm_set_vcn_enable, .dpm_set_jpeg_enable = navi10_dpm_set_jpeg_enable, - .i2c_init = navi10_i2c_control_init, - .i2c_fini = navi10_i2c_control_fini, .print_clk_levels = navi10_print_clk_levels, .force_clk_levels = navi10_force_clk_levels, .populate_umd_state_clk = navi10_populate_umd_state_clk, diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c index 685a8a3b25d4..895d89bea7fa 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c @@ -1177,14 +1177,9 @@ static int sienna_cichlid_get_fan_speed_rpm(struct smu_context *smu, if (!speed) return -EINVAL; - switch (smu_v11_0_get_fan_control_mode(smu)) { - case AMD_FAN_CTRL_AUTO: - return sienna_cichlid_get_smu_metrics_data(smu, - METRICS_CURR_FANSPEED, - speed); - default: - return smu_v11_0_get_fan_speed_rpm(smu, speed); - } + return sienna_cichlid_get_smu_metrics_data(smu, + METRICS_CURR_FANSPEED, + speed); } static int sienna_cichlid_get_fan_parameters(struct smu_context *smu) diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 90807a6b415c..deeed73f4ed6 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -374,6 +374,10 @@ static bool is_edid_digital_input_dp(const struct edid *edid) * drm_dp_downstream_is_type() - is the downstream facing port of certain type? * @dpcd: DisplayPort configuration data * @port_cap: port capabilities + * @type: port type to be checked. Can be: + * %DP_DS_PORT_TYPE_DP, %DP_DS_PORT_TYPE_VGA, %DP_DS_PORT_TYPE_DVI, + * %DP_DS_PORT_TYPE_HDMI, %DP_DS_PORT_TYPE_NON_EDID, + * %DP_DS_PORT_TYPE_DP_DUALMODE or %DP_DS_PORT_TYPE_WIRELESS. * * Caveat: Only works with DPCD 1.1+ port caps. * @@ -870,6 +874,7 @@ EXPORT_SYMBOL(drm_dp_downstream_444_to_420_conversion); /** * drm_dp_downstream_mode() - return a mode for downstream facing port + * @dev: DRM device * @dpcd: DisplayPort configuration data * @port_cap: port capabilities * @@ -1028,7 +1033,8 @@ EXPORT_SYMBOL(drm_dp_downstream_debug); /** * drm_dp_subconnector_type() - get DP branch device type - * + * @dpcd: DisplayPort configuration data + * @port_cap: port capabilities */ enum drm_mode_subconnector drm_dp_subconnector_type(const u8 dpcd[DP_RECEIVER_CAP_SIZE], @@ -1079,6 +1085,10 @@ EXPORT_SYMBOL(drm_dp_subconnector_type); /** * drm_mode_set_dp_subconnector_property - set subconnector for DP connector + * @connector: connector to set property on + * @status: connector status + * @dpcd: DisplayPort configuration data + * @port_cap: port capabilities * * Called by a driver on every detect event. */ diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index a82f37d44258..631125b46e04 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -3741,7 +3741,7 @@ drm_add_cmdb_modes(struct drm_connector *connector, u8 svd) /** * drm_display_mode_from_cea_vic() - return a mode for CEA VIC * @dev: DRM device - * @vic: CEA VIC of the mode + * @video_code: CEA VIC of the mode * * Creates a new mode matching the specified CEA VIC. * diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 19d73868490e..69c2c079d803 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -1085,6 +1085,8 @@ int drm_gem_mmap_obj(struct drm_gem_object *obj, unsigned long obj_size, */ drm_gem_object_get(obj); + vma->vm_private_data = obj; + if (obj->funcs && obj->funcs->mmap) { ret = obj->funcs->mmap(obj, vma); if (ret) { @@ -1107,8 +1109,6 @@ int drm_gem_mmap_obj(struct drm_gem_object *obj, unsigned long obj_size, vma->vm_page_prot = pgprot_decrypted(vma->vm_page_prot); } - vma->vm_private_data = obj; - return 0; } EXPORT_SYMBOL(drm_gem_mmap_obj); diff --git a/drivers/gpu/drm/drm_gem_shmem_helper.c b/drivers/gpu/drm/drm_gem_shmem_helper.c index d77c9f8ff26c..e00616d94f26 100644 --- a/drivers/gpu/drm/drm_gem_shmem_helper.c +++ b/drivers/gpu/drm/drm_gem_shmem_helper.c @@ -593,8 +593,13 @@ int drm_gem_shmem_mmap(struct drm_gem_object *obj, struct vm_area_struct *vma) /* Remove the fake offset */ vma->vm_pgoff -= drm_vma_node_start(&obj->vma_node); - if (obj->import_attach) + if (obj->import_attach) { + /* Drop the reference drm_gem_mmap_obj() acquired.*/ + drm_gem_object_put(obj); + vma->vm_private_data = NULL; + return dma_buf_mmap(obj->dma_buf, vma, 0); + } shmem = to_drm_gem_shmem_obj(obj); diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c index d6808f678db5..9f955f2010c2 100644 --- a/drivers/gpu/drm/drm_prime.c +++ b/drivers/gpu/drm/drm_prime.c @@ -794,6 +794,7 @@ static const struct dma_buf_ops drm_gem_prime_dmabuf_ops = { /** * drm_prime_pages_to_sg - converts a page array into an sg list + * @dev: DRM device * @pages: pointer to the array of page pointers to convert * @nr_pages: length of the page vector * diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c index 829b2a40a482..31337d2a2cde 100644 --- a/drivers/gpu/drm/i915/display/intel_display.c +++ b/drivers/gpu/drm/i915/display/intel_display.c @@ -10636,6 +10636,10 @@ skl_get_initial_plane_config(struct intel_crtc *crtc, val & PLANE_CTL_FLIP_HORIZONTAL) plane_config->rotation |= DRM_MODE_REFLECT_X; + /* 90/270 degree rotation would require extra work */ + if (drm_rotation_90_or_270(plane_config->rotation)) + goto error; + base = intel_de_read(dev_priv, PLANE_SURF(pipe, plane_id)) & 0xfffff000; plane_config->base = base; diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c index 8a9d0bdde1bf..40e9cb29233d 100644 --- a/drivers/gpu/drm/i915/display/intel_psr.c +++ b/drivers/gpu/drm/i915/display/intel_psr.c @@ -1754,7 +1754,7 @@ void intel_psr_atomic_check(struct drm_connector *connector, return; intel_connector = to_intel_connector(connector); - dig_port = enc_to_dig_port(intel_attached_encoder(intel_connector)); + dig_port = enc_to_dig_port(to_intel_encoder(new_state->best_encoder)); if (dev_priv->psr.dp != &dig_port->dp) return; diff --git a/drivers/gpu/drm/i915/gem/i915_gem_domain.c b/drivers/gpu/drm/i915/gem/i915_gem_domain.c index 7c90a63c273d..fcce6909f201 100644 --- a/drivers/gpu/drm/i915/gem/i915_gem_domain.c +++ b/drivers/gpu/drm/i915/gem/i915_gem_domain.c @@ -509,21 +509,6 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, return -ENOENT; /* - * Already in the desired write domain? Nothing for us to do! - * - * We apply a little bit of cunning here to catch a broader set of - * no-ops. If obj->write_domain is set, we must be in the same - * obj->read_domains, and only that domain. Therefore, if that - * obj->write_domain matches the request read_domains, we are - * already in the same read/write domain and can skip the operation, - * without having to further check the requested write_domain. - */ - if (READ_ONCE(obj->write_domain) == read_domains) { - err = 0; - goto out; - } - - /* * Try to flush the object off the GPU without holding the lock. * We will repeat the flush holding the lock in the normal manner * to catch cases where we are gazumped. @@ -560,6 +545,19 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, if (err) goto out; + /* + * Already in the desired write domain? Nothing for us to do! + * + * We apply a little bit of cunning here to catch a broader set of + * no-ops. If obj->write_domain is set, we must be in the same + * obj->read_domains, and only that domain. Therefore, if that + * obj->write_domain matches the request read_domains, we are + * already in the same read/write domain and can skip the operation, + * without having to further check the requested write_domain. + */ + if (READ_ONCE(obj->write_domain) == read_domains) + goto out_unpin; + err = i915_gem_object_lock_interruptible(obj, NULL); if (err) goto out_unpin; diff --git a/drivers/gpu/drm/i915/gt/intel_engine.h b/drivers/gpu/drm/i915/gt/intel_engine.h index 7c3a1012e702..760fefdfe392 100644 --- a/drivers/gpu/drm/i915/gt/intel_engine.h +++ b/drivers/gpu/drm/i915/gt/intel_engine.h @@ -245,22 +245,14 @@ static inline u32 *gen12_emit_pipe_control(u32 *batch, u32 flags0, u32 flags1, u } static inline u32 * -__gen8_emit_ggtt_write_rcs(u32 *cs, u32 value, u32 gtt_offset, u32 flags0, u32 flags1) +__gen8_emit_write_rcs(u32 *cs, u32 value, u32 offset, u32 flags0, u32 flags1) { - /* We're using qword write, offset should be aligned to 8 bytes. */ - GEM_BUG_ON(!IS_ALIGNED(gtt_offset, 8)); - - /* w/a for post sync ops following a GPGPU operation we - * need a prior CS_STALL, which is emitted by the flush - * following the batch. - */ *cs++ = GFX_OP_PIPE_CONTROL(6) | flags0; - *cs++ = flags1 | PIPE_CONTROL_QW_WRITE | PIPE_CONTROL_GLOBAL_GTT_IVB; - *cs++ = gtt_offset; + *cs++ = flags1 | PIPE_CONTROL_QW_WRITE; + *cs++ = offset; *cs++ = 0; *cs++ = value; - /* We're thrashing one dword of HWS. */ - *cs++ = 0; + *cs++ = 0; /* We're thrashing one extra dword. */ return cs; } @@ -268,13 +260,38 @@ __gen8_emit_ggtt_write_rcs(u32 *cs, u32 value, u32 gtt_offset, u32 flags0, u32 f static inline u32* gen8_emit_ggtt_write_rcs(u32 *cs, u32 value, u32 gtt_offset, u32 flags) { - return __gen8_emit_ggtt_write_rcs(cs, value, gtt_offset, 0, flags); + /* We're using qword write, offset should be aligned to 8 bytes. */ + GEM_BUG_ON(!IS_ALIGNED(gtt_offset, 8)); + + return __gen8_emit_write_rcs(cs, + value, + gtt_offset, + 0, + flags | PIPE_CONTROL_GLOBAL_GTT_IVB); } static inline u32* gen12_emit_ggtt_write_rcs(u32 *cs, u32 value, u32 gtt_offset, u32 flags0, u32 flags1) { - return __gen8_emit_ggtt_write_rcs(cs, value, gtt_offset, flags0, flags1); + /* We're using qword write, offset should be aligned to 8 bytes. */ + GEM_BUG_ON(!IS_ALIGNED(gtt_offset, 8)); + + return __gen8_emit_write_rcs(cs, + value, + gtt_offset, + flags0, + flags1 | PIPE_CONTROL_GLOBAL_GTT_IVB); +} + +static inline u32 * +__gen8_emit_flush_dw(u32 *cs, u32 value, u32 gtt_offset, u32 flags) +{ + *cs++ = (MI_FLUSH_DW + 1) | flags; + *cs++ = gtt_offset; + *cs++ = 0; + *cs++ = value; + + return cs; } static inline u32 * @@ -285,12 +302,10 @@ gen8_emit_ggtt_write(u32 *cs, u32 value, u32 gtt_offset, u32 flags) /* Offset should be aligned to 8 bytes for both (QW/DW) write types */ GEM_BUG_ON(!IS_ALIGNED(gtt_offset, 8)); - *cs++ = (MI_FLUSH_DW + 1) | MI_FLUSH_DW_OP_STOREDW | flags; - *cs++ = gtt_offset | MI_FLUSH_DW_USE_GTT; - *cs++ = 0; - *cs++ = value; - - return cs; + return __gen8_emit_flush_dw(cs, + value, + gtt_offset | MI_FLUSH_DW_USE_GTT, + flags | MI_FLUSH_DW_OP_STOREDW); } static inline void __intel_engine_reset(struct intel_engine_cs *engine, diff --git a/drivers/gpu/drm/i915/gt/intel_lrc.c b/drivers/gpu/drm/i915/gt/intel_lrc.c index a32aabce7901..f82c6dd1de18 100644 --- a/drivers/gpu/drm/i915/gt/intel_lrc.c +++ b/drivers/gpu/drm/i915/gt/intel_lrc.c @@ -3547,6 +3547,19 @@ static const struct intel_context_ops execlists_context_ops = { .destroy = execlists_context_destroy, }; +static u32 hwsp_offset(const struct i915_request *rq) +{ + const struct intel_timeline_cacheline *cl; + + /* Before the request is executed, the timeline/cachline is fixed */ + + cl = rcu_dereference_protected(rq->hwsp_cacheline, 1); + if (cl) + return cl->ggtt_offset; + + return rcu_dereference_protected(rq->timeline, 1)->hwsp_offset; +} + static int gen8_emit_init_breadcrumb(struct i915_request *rq) { u32 *cs; @@ -3569,7 +3582,7 @@ static int gen8_emit_init_breadcrumb(struct i915_request *rq) *cs++ = MI_NOOP; *cs++ = MI_STORE_DWORD_IMM_GEN4 | MI_USE_GGTT; - *cs++ = i915_request_timeline(rq)->hwsp_offset; + *cs++ = hwsp_offset(rq); *cs++ = 0; *cs++ = rq->fence.seqno - 1; @@ -4886,11 +4899,9 @@ gen8_emit_fini_breadcrumb_tail(struct i915_request *request, u32 *cs) return gen8_emit_wa_tail(request, cs); } -static u32 *emit_xcs_breadcrumb(struct i915_request *request, u32 *cs) +static u32 *emit_xcs_breadcrumb(struct i915_request *rq, u32 *cs) { - u32 addr = i915_request_active_timeline(request)->hwsp_offset; - - return gen8_emit_ggtt_write(cs, request->fence.seqno, addr, 0); + return gen8_emit_ggtt_write(cs, rq->fence.seqno, hwsp_offset(rq), 0); } static u32 *gen8_emit_fini_breadcrumb(struct i915_request *rq, u32 *cs) @@ -4909,7 +4920,7 @@ static u32 *gen8_emit_fini_breadcrumb_rcs(struct i915_request *request, u32 *cs) /* XXX flush+write+CS_STALL all in one upsets gem_concurrent_blt:kbl */ cs = gen8_emit_ggtt_write_rcs(cs, request->fence.seqno, - i915_request_active_timeline(request)->hwsp_offset, + hwsp_offset(request), PIPE_CONTROL_FLUSH_ENABLE | PIPE_CONTROL_CS_STALL); @@ -4921,7 +4932,7 @@ gen11_emit_fini_breadcrumb_rcs(struct i915_request *request, u32 *cs) { cs = gen8_emit_ggtt_write_rcs(cs, request->fence.seqno, - i915_request_active_timeline(request)->hwsp_offset, + hwsp_offset(request), PIPE_CONTROL_CS_STALL | PIPE_CONTROL_TILE_CACHE_FLUSH | PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH | @@ -4983,7 +4994,9 @@ gen12_emit_fini_breadcrumb_tail(struct i915_request *request, u32 *cs) static u32 *gen12_emit_fini_breadcrumb(struct i915_request *rq, u32 *cs) { - return gen12_emit_fini_breadcrumb_tail(rq, emit_xcs_breadcrumb(rq, cs)); + /* XXX Stalling flush before seqno write; post-sync not */ + cs = emit_xcs_breadcrumb(rq, __gen8_emit_flush_dw(cs, 0, 0, 0)); + return gen12_emit_fini_breadcrumb_tail(rq, cs); } static u32 * @@ -4991,7 +5004,7 @@ gen12_emit_fini_breadcrumb_rcs(struct i915_request *request, u32 *cs) { cs = gen12_emit_ggtt_write_rcs(cs, request->fence.seqno, - i915_request_active_timeline(request)->hwsp_offset, + hwsp_offset(request), PIPE_CONTROL0_HDC_PIPELINE_FLUSH, PIPE_CONTROL_CS_STALL | PIPE_CONTROL_TILE_CACHE_FLUSH | diff --git a/drivers/gpu/drm/i915/gt/intel_timeline.c b/drivers/gpu/drm/i915/gt/intel_timeline.c index a2f74cefe4c3..7ea94d201fe6 100644 --- a/drivers/gpu/drm/i915/gt/intel_timeline.c +++ b/drivers/gpu/drm/i915/gt/intel_timeline.c @@ -188,10 +188,14 @@ cacheline_alloc(struct intel_timeline_hwsp *hwsp, unsigned int cacheline) return cl; } -static void cacheline_acquire(struct intel_timeline_cacheline *cl) +static void cacheline_acquire(struct intel_timeline_cacheline *cl, + u32 ggtt_offset) { - if (cl) - i915_active_acquire(&cl->active); + if (!cl) + return; + + cl->ggtt_offset = ggtt_offset; + i915_active_acquire(&cl->active); } static void cacheline_release(struct intel_timeline_cacheline *cl) @@ -340,7 +344,7 @@ int intel_timeline_pin(struct intel_timeline *tl, struct i915_gem_ww_ctx *ww) GT_TRACE(tl->gt, "timeline:%llx using HWSP offset:%x\n", tl->fence_context, tl->hwsp_offset); - cacheline_acquire(tl->hwsp_cacheline); + cacheline_acquire(tl->hwsp_cacheline, tl->hwsp_offset); if (atomic_fetch_inc(&tl->pin_count)) { cacheline_release(tl->hwsp_cacheline); __i915_vma_unpin(tl->hwsp_ggtt); @@ -515,7 +519,7 @@ __intel_timeline_get_seqno(struct intel_timeline *tl, GT_TRACE(tl->gt, "timeline:%llx using HWSP offset:%x\n", tl->fence_context, tl->hwsp_offset); - cacheline_acquire(cl); + cacheline_acquire(cl, tl->hwsp_offset); tl->hwsp_cacheline = cl; *seqno = timeline_advance(tl); @@ -573,9 +577,7 @@ int intel_timeline_read_hwsp(struct i915_request *from, if (err) goto out; - *hwsp = i915_ggtt_offset(cl->hwsp->vma) + - ptr_unmask_bits(cl->vaddr, CACHELINE_BITS) * CACHELINE_BYTES; - + *hwsp = cl->ggtt_offset; out: i915_active_release(&cl->active); return err; diff --git a/drivers/gpu/drm/i915/gt/intel_timeline_types.h b/drivers/gpu/drm/i915/gt/intel_timeline_types.h index 02181c5020db..4474f487f589 100644 --- a/drivers/gpu/drm/i915/gt/intel_timeline_types.h +++ b/drivers/gpu/drm/i915/gt/intel_timeline_types.h @@ -94,6 +94,8 @@ struct intel_timeline_cacheline { struct intel_timeline_hwsp *hwsp; void *vaddr; + u32 ggtt_offset; + struct rcu_head rcu; }; diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c index 3be37e6fe33d..eb342a759943 100644 --- a/drivers/gpu/drm/i915/gvt/handlers.c +++ b/drivers/gpu/drm/i915/gvt/handlers.c @@ -1489,7 +1489,8 @@ static int hws_pga_write(struct intel_vgpu *vgpu, unsigned int offset, const struct intel_engine_cs *engine = intel_gvt_render_mmio_to_engine(vgpu->gvt, offset); - if (!intel_gvt_ggtt_validate_range(vgpu, value, I915_GTT_PAGE_SIZE)) { + if (value != 0 && + !intel_gvt_ggtt_validate_range(vgpu, value, I915_GTT_PAGE_SIZE)) { gvt_vgpu_err("write invalid HWSP address, reg:0x%x, value:0x%x\n", offset, value); return -EINVAL; @@ -1650,6 +1651,34 @@ static int edp_psr_imr_iir_write(struct intel_vgpu *vgpu, return 0; } +/** + * FixMe: + * If guest fills non-priv batch buffer on ApolloLake/Broxton as Mesa i965 did: + * 717e7539124d (i965: Use a WC map and memcpy for the batch instead of pwrite.) + * Due to the missing flush of bb filled by VM vCPU, host GPU hangs on executing + * these MI_BATCH_BUFFER. + * Temporarily workaround this by setting SNOOP bit for PAT3 used by PPGTT + * PML4 PTE: PAT(0) PCD(1) PWT(1). + * The performance is still expected to be low, will need further improvement. + */ +static int bxt_ppat_low_write(struct intel_vgpu *vgpu, unsigned int offset, + void *p_data, unsigned int bytes) +{ + u64 pat = + GEN8_PPAT(0, CHV_PPAT_SNOOP) | + GEN8_PPAT(1, 0) | + GEN8_PPAT(2, 0) | + GEN8_PPAT(3, CHV_PPAT_SNOOP) | + GEN8_PPAT(4, CHV_PPAT_SNOOP) | + GEN8_PPAT(5, CHV_PPAT_SNOOP) | + GEN8_PPAT(6, CHV_PPAT_SNOOP) | + GEN8_PPAT(7, CHV_PPAT_SNOOP); + + vgpu_vreg(vgpu, offset) = lower_32_bits(pat); + + return 0; +} + static int guc_status_read(struct intel_vgpu *vgpu, unsigned int offset, void *p_data, unsigned int bytes) @@ -2812,7 +2841,7 @@ static int init_bdw_mmio_info(struct intel_gvt *gvt) MMIO_DH(GEN6_PCODE_MAILBOX, D_BDW_PLUS, NULL, mailbox_write); - MMIO_D(GEN8_PRIVATE_PAT_LO, D_BDW_PLUS); + MMIO_D(GEN8_PRIVATE_PAT_LO, D_BDW_PLUS & ~D_BXT); MMIO_D(GEN8_PRIVATE_PAT_HI, D_BDW_PLUS); MMIO_D(GAMTARBMODE, D_BDW_PLUS); @@ -3139,7 +3168,7 @@ static int init_skl_mmio_info(struct intel_gvt *gvt) NULL, NULL); MMIO_DFH(GAMT_CHKN_BIT_REG, D_KBL | D_CFL, F_CMD_ACCESS, NULL, NULL); - MMIO_D(GEN9_CTX_PREEMPT_REG, D_SKL_PLUS); + MMIO_D(GEN9_CTX_PREEMPT_REG, D_SKL_PLUS & ~D_BXT); return 0; } @@ -3313,9 +3342,21 @@ static int init_bxt_mmio_info(struct intel_gvt *gvt) MMIO_D(GEN8_PUSHBUS_SHIFT, D_BXT); MMIO_D(GEN6_GFXPAUSE, D_BXT); MMIO_DFH(GEN8_L3SQCREG1, D_BXT, F_CMD_ACCESS, NULL, NULL); + MMIO_DFH(GEN8_L3CNTLREG, D_BXT, F_CMD_ACCESS, NULL, NULL); + MMIO_DFH(_MMIO(0x20D8), D_BXT, F_CMD_ACCESS, NULL, NULL); + MMIO_F(GEN8_RING_CS_GPR(RENDER_RING_BASE, 0), 0x40, F_CMD_ACCESS, + 0, 0, D_BXT, NULL, NULL); + MMIO_F(GEN8_RING_CS_GPR(GEN6_BSD_RING_BASE, 0), 0x40, F_CMD_ACCESS, + 0, 0, D_BXT, NULL, NULL); + MMIO_F(GEN8_RING_CS_GPR(BLT_RING_BASE, 0), 0x40, F_CMD_ACCESS, + 0, 0, D_BXT, NULL, NULL); + MMIO_F(GEN8_RING_CS_GPR(VEBOX_RING_BASE, 0), 0x40, F_CMD_ACCESS, + 0, 0, D_BXT, NULL, NULL); MMIO_DFH(GEN9_CTX_PREEMPT_REG, D_BXT, F_CMD_ACCESS, NULL, NULL); + MMIO_DH(GEN8_PRIVATE_PAT_LO, D_BXT, NULL, bxt_ppat_low_write); + return 0; } diff --git a/drivers/gpu/drm/i915/gvt/scheduler.c b/drivers/gpu/drm/i915/gvt/scheduler.c index 1570eb8aa978..aed2ef6466a2 100644 --- a/drivers/gpu/drm/i915/gvt/scheduler.c +++ b/drivers/gpu/drm/i915/gvt/scheduler.c @@ -1277,7 +1277,7 @@ void intel_vgpu_clean_submission(struct intel_vgpu *vgpu) i915_context_ppgtt_root_restore(s, i915_vm_to_ppgtt(s->shadow[0]->vm)); for_each_engine(engine, vgpu->gvt->gt, id) - intel_context_unpin(s->shadow[id]); + intel_context_put(s->shadow[id]); kmem_cache_destroy(s->workloads); } @@ -1369,11 +1369,6 @@ int intel_vgpu_setup_submission(struct intel_vgpu *vgpu) ce->ring = __intel_context_ring_size(ring_size); } - ret = intel_context_pin(ce); - intel_context_put(ce); - if (ret) - goto out_shadow_ctx; - s->shadow[i] = ce; } @@ -1405,7 +1400,6 @@ out_shadow_ctx: if (IS_ERR(s->shadow[i])) break; - intel_context_unpin(s->shadow[i]); intel_context_put(s->shadow[i]); } i915_vm_put(&ppgtt->vm); @@ -1479,6 +1473,7 @@ void intel_vgpu_destroy_workload(struct intel_vgpu_workload *workload) { struct intel_vgpu_submission *s = &workload->vgpu->submission; + intel_context_unpin(s->shadow[workload->engine->id]); release_shadow_batch_buffer(workload); release_shadow_wa_ctx(&workload->wa_ctx); @@ -1724,6 +1719,12 @@ intel_vgpu_create_workload(struct intel_vgpu *vgpu, return ERR_PTR(ret); } + ret = intel_context_pin(s->shadow[engine->id]); + if (ret) { + intel_vgpu_destroy_workload(workload); + return ERR_PTR(ret); + } + return workload; } diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c index 366ddfc8df6b..fb5e30de78c2 100644 --- a/drivers/gpu/drm/i915/i915_pci.c +++ b/drivers/gpu/drm/i915/i915_pci.c @@ -389,6 +389,7 @@ static const struct intel_device_info ilk_m_info = { GEN5_FEATURES, PLATFORM(INTEL_IRONLAKE), .is_mobile = 1, + .has_rps = true, .display.has_fbc = 1, }; diff --git a/drivers/gpu/drm/i915/i915_vma.c b/drivers/gpu/drm/i915/i915_vma.c index ffb5287e055a..caa9b041616b 100644 --- a/drivers/gpu/drm/i915/i915_vma.c +++ b/drivers/gpu/drm/i915/i915_vma.c @@ -314,8 +314,10 @@ static void __vma_release(struct dma_fence_work *work) { struct i915_vma_work *vw = container_of(work, typeof(*vw), base); - if (vw->pinned) + if (vw->pinned) { __i915_gem_object_unpin_pages(vw->pinned); + i915_gem_object_put(vw->pinned); + } i915_vm_free_pt_stash(vw->vm, &vw->stash); i915_vm_put(vw->vm); @@ -431,7 +433,7 @@ int i915_vma_bind(struct i915_vma *vma, if (vma->obj) { __i915_gem_object_pin_pages(vma->obj); - work->pinned = vma->obj; + work->pinned = i915_gem_object_get(vma->obj); } } else { vma->ops->bind_vma(vma->vm, NULL, vma, cache_level, bind_flags); diff --git a/drivers/gpu/drm/i915/intel_memory_region.c b/drivers/gpu/drm/i915/intel_memory_region.c index 6b5e9d88646d..180e1078ef7c 100644 --- a/drivers/gpu/drm/i915/intel_memory_region.c +++ b/drivers/gpu/drm/i915/intel_memory_region.c @@ -87,7 +87,7 @@ __intel_memory_region_get_pages_buddy(struct intel_memory_region *mem, min_order = ilog2(size) - ilog2(mem->mm.chunk_size); } - if (size > BIT(mem->mm.max_order) * mem->mm.chunk_size) + if (size > mem->mm.size) return -E2BIG; n_pages = size >> ilog2(mem->mm.chunk_size); diff --git a/drivers/gpu/drm/i915/selftests/intel_memory_region.c b/drivers/gpu/drm/i915/selftests/intel_memory_region.c index 334b0648e253..0aeba8e3af28 100644 --- a/drivers/gpu/drm/i915/selftests/intel_memory_region.c +++ b/drivers/gpu/drm/i915/selftests/intel_memory_region.c @@ -261,6 +261,82 @@ err_close_objects: return err; } +static int igt_mock_splintered_region(void *arg) +{ + struct intel_memory_region *mem = arg; + struct drm_i915_private *i915 = mem->i915; + struct drm_i915_gem_object *obj; + unsigned int expected_order; + LIST_HEAD(objects); + u64 size; + int err = 0; + + /* + * Sanity check we can still allocate everything even if the + * mm.max_order != mm.size. i.e our starting address space size is not a + * power-of-two. + */ + + size = (SZ_4G - 1) & PAGE_MASK; + mem = mock_region_create(i915, 0, size, PAGE_SIZE, 0); + if (IS_ERR(mem)) + return PTR_ERR(mem); + + if (mem->mm.size != size) { + pr_err("%s size mismatch(%llu != %llu)\n", + __func__, mem->mm.size, size); + err = -EINVAL; + goto out_put; + } + + expected_order = get_order(rounddown_pow_of_two(size)); + if (mem->mm.max_order != expected_order) { + pr_err("%s order mismatch(%u != %u)\n", + __func__, mem->mm.max_order, expected_order); + err = -EINVAL; + goto out_put; + } + + obj = igt_object_create(mem, &objects, size, 0); + if (IS_ERR(obj)) { + err = PTR_ERR(obj); + goto out_close; + } + + close_objects(mem, &objects); + + /* + * While we should be able allocate everything without any flag + * restrictions, if we consider I915_BO_ALLOC_CONTIGUOUS then we are + * actually limited to the largest power-of-two for the region size i.e + * max_order, due to the inner workings of the buddy allocator. So make + * sure that does indeed hold true. + */ + + obj = igt_object_create(mem, &objects, size, I915_BO_ALLOC_CONTIGUOUS); + if (!IS_ERR(obj)) { + pr_err("%s too large contiguous allocation was not rejected\n", + __func__); + err = -EINVAL; + goto out_close; + } + + obj = igt_object_create(mem, &objects, rounddown_pow_of_two(size), + I915_BO_ALLOC_CONTIGUOUS); + if (IS_ERR(obj)) { + pr_err("%s largest possible contiguous allocation failed\n", + __func__); + err = PTR_ERR(obj); + goto out_close; + } + +out_close: + close_objects(mem, &objects); +out_put: + intel_memory_region_put(mem); + return err; +} + static int igt_gpu_write_dw(struct intel_context *ce, struct i915_vma *vma, u32 dword, @@ -771,6 +847,7 @@ int intel_memory_region_mock_selftests(void) static const struct i915_subtest tests[] = { SUBTEST(igt_mock_fill), SUBTEST(igt_mock_contiguous), + SUBTEST(igt_mock_splintered_region), }; struct intel_memory_region *mem; struct drm_i915_private *i915; diff --git a/drivers/gpu/drm/i915/selftests/mock_region.c b/drivers/gpu/drm/i915/selftests/mock_region.c index 09660f5a0a4c..979d96f27c43 100644 --- a/drivers/gpu/drm/i915/selftests/mock_region.c +++ b/drivers/gpu/drm/i915/selftests/mock_region.c @@ -24,7 +24,7 @@ mock_object_create(struct intel_memory_region *mem, struct drm_i915_private *i915 = mem->i915; struct drm_i915_gem_object *obj; - if (size > BIT(mem->mm.max_order) * mem->mm.chunk_size) + if (size > mem->mm.size) return ERR_PTR(-E2BIG); obj = i915_gem_object_alloc(); diff --git a/drivers/gpu/drm/imx/dw_hdmi-imx.c b/drivers/gpu/drm/imx/dw_hdmi-imx.c index 71d84c7a5378..d07b39b8afd2 100644 --- a/drivers/gpu/drm/imx/dw_hdmi-imx.c +++ b/drivers/gpu/drm/imx/dw_hdmi-imx.c @@ -111,10 +111,6 @@ static int dw_hdmi_imx_parse_dt(struct imx_hdmi *hdmi) return 0; } -static void dw_hdmi_imx_encoder_disable(struct drm_encoder *encoder) -{ -} - static void dw_hdmi_imx_encoder_enable(struct drm_encoder *encoder) { struct imx_hdmi *hdmi = enc_to_imx_hdmi(encoder); @@ -140,7 +136,6 @@ static int dw_hdmi_imx_atomic_check(struct drm_encoder *encoder, static const struct drm_encoder_helper_funcs dw_hdmi_imx_encoder_helper_funcs = { .enable = dw_hdmi_imx_encoder_enable, - .disable = dw_hdmi_imx_encoder_disable, .atomic_check = dw_hdmi_imx_atomic_check, }; @@ -219,15 +214,9 @@ static int dw_hdmi_imx_bind(struct device *dev, struct device *master, hdmi->dev = &pdev->dev; encoder = &hdmi->encoder; - encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node); - /* - * If we failed to find the CRTC(s) which this encoder is - * supposed to be connected to, it's because the CRTC has - * not been registered yet. Defer probing, and hope that - * the required CRTC is added later. - */ - if (encoder->possible_crtcs == 0) - return -EPROBE_DEFER; + ret = imx_drm_encoder_parse_of(drm, encoder, dev->of_node); + if (ret) + return ret; ret = dw_hdmi_imx_parse_dt(hdmi); if (ret < 0) diff --git a/drivers/gpu/drm/imx/imx-drm-core.c b/drivers/gpu/drm/imx/imx-drm-core.c index 7d00c49fd5a5..9bf5ad6d18a2 100644 --- a/drivers/gpu/drm/imx/imx-drm-core.c +++ b/drivers/gpu/drm/imx/imx-drm-core.c @@ -20,6 +20,7 @@ #include <drm/drm_fb_helper.h> #include <drm/drm_gem_cma_helper.h> #include <drm/drm_gem_framebuffer_helper.h> +#include <drm/drm_managed.h> #include <drm/drm_of.h> #include <drm/drm_plane_helper.h> #include <drm/drm_probe_helper.h> @@ -212,7 +213,9 @@ static int imx_drm_bind(struct device *dev) drm->mode_config.allow_fb_modifiers = true; drm->mode_config.normalize_zpos = true; - drm_mode_config_init(drm); + ret = drmm_mode_config_init(drm); + if (ret) + return ret; ret = drm_vblank_init(drm, MAX_CRTC); if (ret) @@ -251,7 +254,6 @@ err_poll_fini: drm_kms_helper_poll_fini(drm); component_unbind_all(drm->dev, drm); err_kms: - drm_mode_config_cleanup(drm); drm_dev_put(drm); return ret; @@ -267,11 +269,9 @@ static void imx_drm_unbind(struct device *dev) component_unbind_all(drm->dev, drm); - drm_mode_config_cleanup(drm); + drm_dev_put(drm); dev_set_drvdata(dev, NULL); - - drm_dev_put(drm); } static const struct component_master_ops imx_drm_ops = { diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index af757d1e21fe..41e2978cb1eb 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -62,7 +62,6 @@ struct imx_ldb_channel { struct i2c_adapter *ddc; int chno; void *edid; - int edid_len; struct drm_display_mode mode; int mode_valid; u32 bus_format; @@ -536,15 +535,14 @@ static int imx_ldb_panel_ddc(struct device *dev, } if (!channel->ddc) { + int edid_len; + /* if no DDC available, fallback to hardcoded EDID */ dev_dbg(dev, "no ddc available\n"); - edidp = of_get_property(child, "edid", - &channel->edid_len); + edidp = of_get_property(child, "edid", &edid_len); if (edidp) { - channel->edid = kmemdup(edidp, - channel->edid_len, - GFP_KERNEL); + channel->edid = kmemdup(edidp, edid_len, GFP_KERNEL); } else if (!channel->panel) { /* fallback to display-timings node */ ret = of_get_drm_display_mode(child, diff --git a/drivers/gpu/drm/imx/imx-tve.c b/drivers/gpu/drm/imx/imx-tve.c index 813bb6156a68..2a8d2e32e7b4 100644 --- a/drivers/gpu/drm/imx/imx-tve.c +++ b/drivers/gpu/drm/imx/imx-tve.c @@ -13,7 +13,6 @@ #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> -#include <linux/spinlock.h> #include <linux/videodev2.h> #include <video/imx-ipu-v3.h> @@ -104,8 +103,6 @@ struct imx_tve { struct drm_connector connector; struct drm_encoder encoder; struct device *dev; - spinlock_t lock; /* register lock */ - bool enabled; int mode; int di_hsync_pin; int di_vsync_pin; @@ -129,30 +126,10 @@ static inline struct imx_tve *enc_to_tve(struct drm_encoder *e) return container_of(e, struct imx_tve, encoder); } -static void tve_lock(void *__tve) -__acquires(&tve->lock) -{ - struct imx_tve *tve = __tve; - - spin_lock(&tve->lock); -} - -static void tve_unlock(void *__tve) -__releases(&tve->lock) -{ - struct imx_tve *tve = __tve; - - spin_unlock(&tve->lock); -} - static void tve_enable(struct imx_tve *tve) { - if (!tve->enabled) { - tve->enabled = true; - clk_prepare_enable(tve->clk); - regmap_update_bits(tve->regmap, TVE_COM_CONF_REG, - TVE_EN, TVE_EN); - } + clk_prepare_enable(tve->clk); + regmap_update_bits(tve->regmap, TVE_COM_CONF_REG, TVE_EN, TVE_EN); /* clear interrupt status register */ regmap_write(tve->regmap, TVE_STAT_REG, 0xffffffff); @@ -169,11 +146,8 @@ static void tve_enable(struct imx_tve *tve) static void tve_disable(struct imx_tve *tve) { - if (tve->enabled) { - tve->enabled = false; - regmap_update_bits(tve->regmap, TVE_COM_CONF_REG, TVE_EN, 0); - clk_disable_unprepare(tve->clk); - } + regmap_update_bits(tve->regmap, TVE_COM_CONF_REG, TVE_EN, 0); + clk_disable_unprepare(tve->clk); } static int tve_setup_tvout(struct imx_tve *tve) @@ -500,8 +474,7 @@ static struct regmap_config tve_regmap_config = { .readable_reg = imx_tve_readable_reg, - .lock = tve_lock, - .unlock = tve_unlock, + .fast_io = true, .max_register = 0xdc, }; @@ -511,7 +484,7 @@ static const char * const imx_tve_modes[] = { [TVE_MODE_VGA] = "vga", }; -static const int of_get_tve_mode(struct device_node *np) +static int of_get_tve_mode(struct device_node *np) { const char *bm; int ret, i; @@ -544,7 +517,6 @@ static int imx_tve_bind(struct device *dev, struct device *master, void *data) memset(tve, 0, sizeof(*tve)); tve->dev = dev; - spin_lock_init(&tve->lock); ddc_node = of_parse_phandle(np, "ddc-i2c-bus", 0); if (ddc_node) { diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c index 8232f512b9ed..2eb8df4697df 100644 --- a/drivers/gpu/drm/imx/parallel-display.c +++ b/drivers/gpu/drm/imx/parallel-display.c @@ -28,7 +28,6 @@ struct imx_parallel_display { struct drm_bridge bridge; struct device *dev; void *edid; - int edid_len; u32 bus_format; u32 bus_flags; struct drm_display_mode mode; @@ -41,11 +40,6 @@ static inline struct imx_parallel_display *con_to_imxpd(struct drm_connector *c) return container_of(c, struct imx_parallel_display, connector); } -static inline struct imx_parallel_display *enc_to_imxpd(struct drm_encoder *e) -{ - return container_of(e, struct imx_parallel_display, encoder); -} - static inline struct imx_parallel_display *bridge_to_imxpd(struct drm_bridge *b) { return container_of(b, struct imx_parallel_display, bridge); @@ -310,6 +304,7 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data) struct device_node *np = dev->of_node; const u8 *edidp; struct imx_parallel_display *imxpd; + int edid_len; int ret; u32 bus_format = 0; const char *fmt; @@ -323,9 +318,9 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data) if (ret && ret != -ENODEV) return ret; - edidp = of_get_property(np, "edid", &imxpd->edid_len); + edidp = of_get_property(np, "edid", &edid_len); if (edidp) - imxpd->edid = kmemdup(edidp, imxpd->edid_len, GFP_KERNEL); + imxpd->edid = devm_kmemdup(dev, edidp, edid_len, GFP_KERNEL); ret = of_property_read_string(np, "interface-pix-fmt", &fmt); if (!ret) { @@ -349,17 +344,8 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data) return 0; } -static void imx_pd_unbind(struct device *dev, struct device *master, - void *data) -{ - struct imx_parallel_display *imxpd = dev_get_drvdata(dev); - - kfree(imxpd->edid); -} - static const struct component_ops imx_pd_ops = { .bind = imx_pd_bind, - .unbind = imx_pd_unbind, }; static int imx_pd_probe(struct platform_device *pdev) diff --git a/drivers/gpu/drm/nouveau/dispnv50/core.h b/drivers/gpu/drm/nouveau/dispnv50/core.h index 498622c0c670..f75088186fba 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/core.h +++ b/drivers/gpu/drm/nouveau/dispnv50/core.h @@ -44,6 +44,7 @@ int core507d_new_(const struct nv50_core_func *, struct nouveau_drm *, s32, struct nv50_core **); int core507d_init(struct nv50_core *); void core507d_ntfy_init(struct nouveau_bo *, u32); +int core507d_read_caps(struct nv50_disp *disp); int core507d_caps_init(struct nouveau_drm *, struct nv50_disp *); int core507d_ntfy_wait_done(struct nouveau_bo *, u32, struct nvif_device *); int core507d_update(struct nv50_core *, u32 *, bool); @@ -55,6 +56,7 @@ extern const struct nv50_outp_func pior507d; int core827d_new(struct nouveau_drm *, s32, struct nv50_core **); int core907d_new(struct nouveau_drm *, s32, struct nv50_core **); +int core907d_caps_init(struct nouveau_drm *drm, struct nv50_disp *disp); extern const struct nv50_outp_func dac907d; extern const struct nv50_outp_func sor907d; diff --git a/drivers/gpu/drm/nouveau/dispnv50/core507d.c b/drivers/gpu/drm/nouveau/dispnv50/core507d.c index 248edf69e168..e6f16a7750f0 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/core507d.c +++ b/drivers/gpu/drm/nouveau/dispnv50/core507d.c @@ -78,19 +78,56 @@ core507d_ntfy_init(struct nouveau_bo *bo, u32 offset) } int -core507d_caps_init(struct nouveau_drm *drm, struct nv50_disp *disp) +core507d_read_caps(struct nv50_disp *disp) { struct nvif_push *push = disp->core->chan.push; int ret; - if ((ret = PUSH_WAIT(push, 2))) + ret = PUSH_WAIT(push, 6); + if (ret) return ret; + PUSH_MTHD(push, NV507D, SET_NOTIFIER_CONTROL, + NVDEF(NV507D, SET_NOTIFIER_CONTROL, MODE, WRITE) | + NVVAL(NV507D, SET_NOTIFIER_CONTROL, OFFSET, NV50_DISP_CORE_NTFY >> 2) | + NVDEF(NV507D, SET_NOTIFIER_CONTROL, NOTIFY, ENABLE)); + PUSH_MTHD(push, NV507D, GET_CAPABILITIES, 0x00000000); + + PUSH_MTHD(push, NV507D, SET_NOTIFIER_CONTROL, + NVDEF(NV507D, SET_NOTIFIER_CONTROL, NOTIFY, DISABLE)); + return PUSH_KICK(push); } int +core507d_caps_init(struct nouveau_drm *drm, struct nv50_disp *disp) +{ + struct nv50_core *core = disp->core; + struct nouveau_bo *bo = disp->sync; + s64 time; + int ret; + + NVBO_WR32(bo, NV50_DISP_CORE_NTFY, NV_DISP_CORE_NOTIFIER_1, CAPABILITIES_1, + NVDEF(NV_DISP_CORE_NOTIFIER_1, CAPABILITIES_1, DONE, FALSE)); + + ret = core507d_read_caps(disp); + if (ret < 0) + return ret; + + time = nvif_msec(core->chan.base.device, 2000ULL, + if (NVBO_TD32(bo, NV50_DISP_CORE_NTFY, + NV_DISP_CORE_NOTIFIER_1, CAPABILITIES_1, DONE, ==, TRUE)) + break; + usleep_range(1, 2); + ); + if (time < 0) + NV_ERROR(drm, "core caps notifier timeout\n"); + + return 0; +} + +int core507d_init(struct nv50_core *core) { struct nvif_push *push = core->chan.push; diff --git a/drivers/gpu/drm/nouveau/dispnv50/core907d.c b/drivers/gpu/drm/nouveau/dispnv50/core907d.c index b17c03529c78..8564d4dffaff 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/core907d.c +++ b/drivers/gpu/drm/nouveau/dispnv50/core907d.c @@ -22,11 +22,45 @@ #include "core.h" #include "head.h" +#include <nvif/push507c.h> +#include <nvif/timer.h> + +#include <nvhw/class/cl907d.h> + +#include "nouveau_bo.h" + +int +core907d_caps_init(struct nouveau_drm *drm, struct nv50_disp *disp) +{ + struct nv50_core *core = disp->core; + struct nouveau_bo *bo = disp->sync; + s64 time; + int ret; + + NVBO_WR32(bo, NV50_DISP_CORE_NTFY, NV907D_CORE_NOTIFIER_3, CAPABILITIES_4, + NVDEF(NV907D_CORE_NOTIFIER_3, CAPABILITIES_4, DONE, FALSE)); + + ret = core507d_read_caps(disp); + if (ret < 0) + return ret; + + time = nvif_msec(core->chan.base.device, 2000ULL, + if (NVBO_TD32(bo, NV50_DISP_CORE_NTFY, + NV907D_CORE_NOTIFIER_3, CAPABILITIES_4, DONE, ==, TRUE)) + break; + usleep_range(1, 2); + ); + if (time < 0) + NV_ERROR(drm, "core caps notifier timeout\n"); + + return 0; +} + static const struct nv50_core_func core907d = { .init = core507d_init, .ntfy_init = core507d_ntfy_init, - .caps_init = core507d_caps_init, + .caps_init = core907d_caps_init, .ntfy_wait_done = core507d_ntfy_wait_done, .update = core507d_update, .head = &head907d, diff --git a/drivers/gpu/drm/nouveau/dispnv50/core917d.c b/drivers/gpu/drm/nouveau/dispnv50/core917d.c index 66846f372080..1cd3a2a35dfb 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/core917d.c +++ b/drivers/gpu/drm/nouveau/dispnv50/core917d.c @@ -26,7 +26,7 @@ static const struct nv50_core_func core917d = { .init = core507d_init, .ntfy_init = core507d_ntfy_init, - .caps_init = core507d_caps_init, + .caps_init = core907d_caps_init, .ntfy_wait_done = core507d_ntfy_wait_done, .update = core507d_update, .head = &head917d, diff --git a/drivers/gpu/drm/nouveau/include/nvhw/class/cl507d.h b/drivers/gpu/drm/nouveau/include/nvhw/class/cl507d.h index 2e444bac701d..6a463f308b64 100644 --- a/drivers/gpu/drm/nouveau/include/nvhw/class/cl507d.h +++ b/drivers/gpu/drm/nouveau/include/nvhw/class/cl507d.h @@ -32,7 +32,10 @@ #define NV_DISP_CORE_NOTIFIER_1_COMPLETION_0_DONE_TRUE 0x00000001 #define NV_DISP_CORE_NOTIFIER_1_COMPLETION_0_R0 15:1 #define NV_DISP_CORE_NOTIFIER_1_COMPLETION_0_TIMESTAMP 29:16 - +#define NV_DISP_CORE_NOTIFIER_1_CAPABILITIES_1 0x00000001 +#define NV_DISP_CORE_NOTIFIER_1_CAPABILITIES_1_DONE 0:0 +#define NV_DISP_CORE_NOTIFIER_1_CAPABILITIES_1_DONE_FALSE 0x00000000 +#define NV_DISP_CORE_NOTIFIER_1_CAPABILITIES_1_DONE_TRUE 0x00000001 // class methods #define NV507D_UPDATE (0x00000080) diff --git a/drivers/gpu/drm/nouveau/include/nvhw/class/cl907d.h b/drivers/gpu/drm/nouveau/include/nvhw/class/cl907d.h index 34bc3eafac7d..79aff6ff3138 100644 --- a/drivers/gpu/drm/nouveau/include/nvhw/class/cl907d.h +++ b/drivers/gpu/drm/nouveau/include/nvhw/class/cl907d.h @@ -24,6 +24,10 @@ #ifndef _cl907d_h_ #define _cl907d_h_ +#define NV907D_CORE_NOTIFIER_3_CAPABILITIES_4 0x00000004 +#define NV907D_CORE_NOTIFIER_3_CAPABILITIES_4_DONE 0:0 +#define NV907D_CORE_NOTIFIER_3_CAPABILITIES_4_DONE_FALSE 0x00000000 +#define NV907D_CORE_NOTIFIER_3_CAPABILITIES_4_DONE_TRUE 0x00000001 #define NV907D_CORE_NOTIFIER_3_CAPABILITIES_CAP_SOR0_20 0x00000014 #define NV907D_CORE_NOTIFIER_3_CAPABILITIES_CAP_SOR0_20_SINGLE_LVDS18 0:0 #define NV907D_CORE_NOTIFIER_3_CAPABILITIES_CAP_SOR0_20_SINGLE_LVDS18_FALSE 0x00000000 diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 49dd0cbc332f..6f21f36719fc 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -1023,29 +1023,6 @@ get_tmds_link_bandwidth(struct drm_connector *connector) return 112000 * duallink_scale; } -enum drm_mode_status -nouveau_conn_mode_clock_valid(const struct drm_display_mode *mode, - const unsigned min_clock, - const unsigned max_clock, - unsigned int *clock_out) -{ - unsigned int clock = mode->clock; - - if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == - DRM_MODE_FLAG_3D_FRAME_PACKING) - clock *= 2; - - if (clock < min_clock) - return MODE_CLOCK_LOW; - if (clock > max_clock) - return MODE_CLOCK_HIGH; - - if (clock_out) - *clock_out = clock; - - return MODE_OK; -} - static enum drm_mode_status nouveau_connector_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) @@ -1053,7 +1030,7 @@ nouveau_connector_mode_valid(struct drm_connector *connector, struct nouveau_connector *nv_connector = nouveau_connector(connector); struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; struct drm_encoder *encoder = to_drm_encoder(nv_encoder); - unsigned min_clock = 25000, max_clock = min_clock; + unsigned int min_clock = 25000, max_clock = min_clock, clock = mode->clock; switch (nv_encoder->dcb->type) { case DCB_OUTPUT_LVDS: @@ -1082,8 +1059,15 @@ nouveau_connector_mode_valid(struct drm_connector *connector, return MODE_BAD; } - return nouveau_conn_mode_clock_valid(mode, min_clock, max_clock, - NULL); + if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING) + clock *= 2; + + if (clock < min_clock) + return MODE_CLOCK_LOW; + if (clock > max_clock) + return MODE_CLOCK_HIGH; + + return MODE_OK; } static struct drm_encoder * diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c index 7b640e05bd4c..040ed88d362d 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dp.c +++ b/drivers/gpu/drm/nouveau/nouveau_dp.c @@ -231,23 +231,30 @@ nv50_dp_mode_valid(struct drm_connector *connector, const struct drm_display_mode *mode, unsigned *out_clock) { - const unsigned min_clock = 25000; - unsigned max_clock, ds_clock, clock; - enum drm_mode_status ret; + const unsigned int min_clock = 25000; + unsigned int max_rate, mode_rate, ds_max_dotclock, clock = mode->clock; + const u8 bpp = connector->display_info.bpc * 3; if (mode->flags & DRM_MODE_FLAG_INTERLACE && !outp->caps.dp_interlace) return MODE_NO_INTERLACE; - max_clock = outp->dp.link_nr * outp->dp.link_bw; - ds_clock = drm_dp_downstream_max_dotclock(outp->dp.dpcd, - outp->dp.downstream_ports); - if (ds_clock) - max_clock = min(max_clock, ds_clock); + if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING) + clock *= 2; + + max_rate = outp->dp.link_nr * outp->dp.link_bw; + mode_rate = DIV_ROUND_UP(clock * bpp, 8); + if (mode_rate > max_rate) + return MODE_CLOCK_HIGH; + + ds_max_dotclock = drm_dp_downstream_max_dotclock(outp->dp.dpcd, outp->dp.downstream_ports); + if (ds_max_dotclock && clock > ds_max_dotclock) + return MODE_CLOCK_HIGH; + + if (clock < min_clock) + return MODE_CLOCK_LOW; - clock = mode->clock * (connector->display_info.bpc * 3) / 10; - ret = nouveau_conn_mode_clock_valid(mode, min_clock, max_clock, - &clock); if (out_clock) *out_clock = clock; - return ret; + + return MODE_OK; } diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c index 89adadf4706b..549bc67feabb 100644 --- a/drivers/gpu/drm/nouveau/nouveau_gem.c +++ b/drivers/gpu/drm/nouveau/nouveau_gem.c @@ -190,7 +190,8 @@ nouveau_gem_new(struct nouveau_cli *cli, u64 size, int align, uint32_t domain, * to the caller, instead of a normal nouveau_bo ttm reference. */ ret = drm_gem_object_init(drm->dev, &nvbo->bo.base, size); if (ret) { - nouveau_bo_ref(NULL, &nvbo); + drm_gem_object_release(&nvbo->bo.base); + kfree(nvbo); return ret; } diff --git a/drivers/gpu/drm/nouveau/nouveau_svm.c b/drivers/gpu/drm/nouveau/nouveau_svm.c index 2df1c0460559..4f69e4c3dafd 100644 --- a/drivers/gpu/drm/nouveau/nouveau_svm.c +++ b/drivers/gpu/drm/nouveau/nouveau_svm.c @@ -105,11 +105,11 @@ nouveau_svmm_bind(struct drm_device *dev, void *data, struct nouveau_cli *cli = nouveau_cli(file_priv); struct drm_nouveau_svm_bind *args = data; unsigned target, cmd, priority; - unsigned long addr, end, size; + unsigned long addr, end; struct mm_struct *mm; args->va_start &= PAGE_MASK; - args->va_end &= PAGE_MASK; + args->va_end = ALIGN(args->va_end, PAGE_SIZE); /* Sanity check arguments */ if (args->reserved0 || args->reserved1) @@ -118,8 +118,6 @@ nouveau_svmm_bind(struct drm_device *dev, void *data, return -EINVAL; if (args->va_start >= args->va_end) return -EINVAL; - if (!args->npages) - return -EINVAL; cmd = args->header >> NOUVEAU_SVM_BIND_COMMAND_SHIFT; cmd &= NOUVEAU_SVM_BIND_COMMAND_MASK; @@ -151,12 +149,6 @@ nouveau_svmm_bind(struct drm_device *dev, void *data, if (args->stride) return -EINVAL; - size = ((unsigned long)args->npages) << PAGE_SHIFT; - if ((args->va_start + size) <= args->va_start) - return -EINVAL; - if ((args->va_start + size) > args->va_end) - return -EINVAL; - /* * Ok we are ask to do something sane, for now we only support migrate * commands but we will add things like memory policy (what to do on @@ -171,7 +163,7 @@ nouveau_svmm_bind(struct drm_device *dev, void *data, return -EINVAL; } - for (addr = args->va_start, end = args->va_start + size; addr < end;) { + for (addr = args->va_start, end = args->va_end; addr < end;) { struct vm_area_struct *vma; unsigned long next; diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c b/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c index dcb70677d0ac..7851bec5f0e5 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c @@ -2924,17 +2924,34 @@ nvkm_device_del(struct nvkm_device **pdevice) } } +/* returns true if the GPU is in the CPU native byte order */ static inline bool nvkm_device_endianness(struct nvkm_device *device) { - u32 boot1 = nvkm_rd32(device, 0x000004) & 0x01000001; #ifdef __BIG_ENDIAN - if (!boot1) - return false; + const bool big_endian = true; #else - if (boot1) - return false; + const bool big_endian = false; #endif + + /* Read NV_PMC_BOOT_1, and assume non-functional endian switch if it + * doesn't contain the expected values. + */ + u32 pmc_boot_1 = nvkm_rd32(device, 0x000004); + if (pmc_boot_1 && pmc_boot_1 != 0x01000001) + return !big_endian; /* Assume GPU is LE in this case. */ + + /* 0 means LE and 0x01000001 means BE GPU. Condition is true when + * GPU/CPU endianness don't match. + */ + if (big_endian == !pmc_boot_1) { + nvkm_wr32(device, 0x000004, 0x01000001); + nvkm_rd32(device, 0x000000); + if (nvkm_rd32(device, 0x000004) != (big_endian ? 0x01000001 : 0x00000000)) + return !big_endian; /* Assume GPU is LE on any unexpected read-back. */ + } + + /* CPU/GPU endianness should (hopefully) match. */ return true; } @@ -2987,14 +3004,10 @@ nvkm_device_ctor(const struct nvkm_device_func *func, if (detect) { /* switch mmio to cpu's native endianness */ if (!nvkm_device_endianness(device)) { - nvkm_wr32(device, 0x000004, 0x01000001); - nvkm_rd32(device, 0x000000); - if (!nvkm_device_endianness(device)) { - nvdev_error(device, - "GPU not supported on big-endian\n"); - ret = -ENOSYS; - goto done; - } + nvdev_error(device, + "Couldn't switch GPU to CPUs endianess\n"); + ret = -ENOSYS; + goto done; } boot0 = nvkm_rd32(device, 0x000000); diff --git a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c index 3482e28e30fc..0c5f22e95c2d 100644 --- a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c +++ b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c @@ -26,7 +26,9 @@ struct mantix { struct device *dev; struct drm_panel panel; + struct gpio_desc *reset_gpio; + struct gpio_desc *tp_rstn_gpio; struct regulator *avdd; struct regulator *avee; @@ -124,6 +126,10 @@ static int mantix_unprepare(struct drm_panel *panel) { struct mantix *ctx = panel_to_mantix(panel); + gpiod_set_value_cansleep(ctx->tp_rstn_gpio, 1); + usleep_range(5000, 6000); + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + regulator_disable(ctx->avee); regulator_disable(ctx->avdd); /* T11 */ @@ -165,13 +171,10 @@ static int mantix_prepare(struct drm_panel *panel) return ret; } - /* T3+T5 */ - usleep_range(10000, 12000); - - gpiod_set_value_cansleep(ctx->reset_gpio, 1); - usleep_range(5150, 7000); - + /* T3 + T4 + time for voltage to become stable: */ + usleep_range(6000, 7000); gpiod_set_value_cansleep(ctx->reset_gpio, 0); + gpiod_set_value_cansleep(ctx->tp_rstn_gpio, 0); /* T6 */ msleep(50); @@ -204,7 +207,7 @@ static int mantix_get_modes(struct drm_panel *panel, if (!mode) { dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n", default_mode.hdisplay, default_mode.vdisplay, - drm_mode_vrefresh(mode)); + drm_mode_vrefresh(&default_mode)); return -ENOMEM; } @@ -236,12 +239,18 @@ static int mantix_probe(struct mipi_dsi_device *dsi) if (!ctx) return -ENOMEM; - ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(ctx->reset_gpio)) { dev_err(dev, "cannot get reset gpio\n"); return PTR_ERR(ctx->reset_gpio); } + ctx->tp_rstn_gpio = devm_gpiod_get(dev, "mantix,tp-rstn", GPIOD_OUT_HIGH); + if (IS_ERR(ctx->tp_rstn_gpio)) { + dev_err(dev, "cannot get tp-rstn gpio\n"); + return PTR_ERR(ctx->tp_rstn_gpio); + } + mipi_dsi_set_drvdata(dsi, ctx); ctx->dev = dev; diff --git a/drivers/gpu/drm/panfrost/panfrost_drv.c b/drivers/gpu/drm/panfrost/panfrost_drv.c index 37d4cb7a5491..0fc084110e5b 100644 --- a/drivers/gpu/drm/panfrost/panfrost_drv.c +++ b/drivers/gpu/drm/panfrost/panfrost_drv.c @@ -626,6 +626,7 @@ static int panfrost_probe(struct platform_device *pdev) err_out1: pm_runtime_disable(pfdev->dev); panfrost_device_fini(pfdev); + pm_runtime_set_suspended(pfdev->dev); err_out0: drm_dev_put(ddev); return err; @@ -640,9 +641,9 @@ static int panfrost_remove(struct platform_device *pdev) panfrost_gem_shrinker_cleanup(ddev); pm_runtime_get_sync(pfdev->dev); - panfrost_device_fini(pfdev); - pm_runtime_put_sync_suspend(pfdev->dev); pm_runtime_disable(pfdev->dev); + panfrost_device_fini(pfdev); + pm_runtime_set_suspended(pfdev->dev); drm_dev_put(ddev); return 0; diff --git a/drivers/gpu/drm/panfrost/panfrost_gem.c b/drivers/gpu/drm/panfrost/panfrost_gem.c index 1a6cea0e0bd7..62d4d710a571 100644 --- a/drivers/gpu/drm/panfrost/panfrost_gem.c +++ b/drivers/gpu/drm/panfrost/panfrost_gem.c @@ -105,14 +105,12 @@ void panfrost_gem_mapping_put(struct panfrost_gem_mapping *mapping) kref_put(&mapping->refcount, panfrost_gem_mapping_release); } -void panfrost_gem_teardown_mappings(struct panfrost_gem_object *bo) +void panfrost_gem_teardown_mappings_locked(struct panfrost_gem_object *bo) { struct panfrost_gem_mapping *mapping; - mutex_lock(&bo->mappings.lock); list_for_each_entry(mapping, &bo->mappings.list, node) panfrost_gem_teardown_mapping(mapping); - mutex_unlock(&bo->mappings.lock); } int panfrost_gem_open(struct drm_gem_object *obj, struct drm_file *file_priv) diff --git a/drivers/gpu/drm/panfrost/panfrost_gem.h b/drivers/gpu/drm/panfrost/panfrost_gem.h index b3517ff9630c..8088d5fd8480 100644 --- a/drivers/gpu/drm/panfrost/panfrost_gem.h +++ b/drivers/gpu/drm/panfrost/panfrost_gem.h @@ -82,7 +82,7 @@ struct panfrost_gem_mapping * panfrost_gem_mapping_get(struct panfrost_gem_object *bo, struct panfrost_file_priv *priv); void panfrost_gem_mapping_put(struct panfrost_gem_mapping *mapping); -void panfrost_gem_teardown_mappings(struct panfrost_gem_object *bo); +void panfrost_gem_teardown_mappings_locked(struct panfrost_gem_object *bo); void panfrost_gem_shrinker_init(struct drm_device *dev); void panfrost_gem_shrinker_cleanup(struct drm_device *dev); diff --git a/drivers/gpu/drm/panfrost/panfrost_gem_shrinker.c b/drivers/gpu/drm/panfrost/panfrost_gem_shrinker.c index 288e46c40673..1b9f68d8e9aa 100644 --- a/drivers/gpu/drm/panfrost/panfrost_gem_shrinker.c +++ b/drivers/gpu/drm/panfrost/panfrost_gem_shrinker.c @@ -40,18 +40,26 @@ static bool panfrost_gem_purge(struct drm_gem_object *obj) { struct drm_gem_shmem_object *shmem = to_drm_gem_shmem_obj(obj); struct panfrost_gem_object *bo = to_panfrost_bo(obj); + bool ret = false; if (atomic_read(&bo->gpu_usecount)) return false; - if (!mutex_trylock(&shmem->pages_lock)) + if (!mutex_trylock(&bo->mappings.lock)) return false; - panfrost_gem_teardown_mappings(bo); + if (!mutex_trylock(&shmem->pages_lock)) + goto unlock_mappings; + + panfrost_gem_teardown_mappings_locked(bo); drm_gem_shmem_purge_locked(obj); + ret = true; mutex_unlock(&shmem->pages_lock); - return true; + +unlock_mappings: + mutex_unlock(&bo->mappings.lock); + return ret; } static unsigned long diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.c b/drivers/gpu/drm/sun4i/sun4i_frontend.c index b51cc685c13a..edb60ae0a9b7 100644 --- a/drivers/gpu/drm/sun4i/sun4i_frontend.c +++ b/drivers/gpu/drm/sun4i/sun4i_frontend.c @@ -407,6 +407,7 @@ int sun4i_frontend_update_formats(struct sun4i_frontend *frontend, struct drm_framebuffer *fb = state->fb; const struct drm_format_info *format = fb->format; uint64_t modifier = fb->modifier; + unsigned int ch1_phase_idx; u32 out_fmt_val; u32 in_fmt_val, in_mod_val, in_ps_val; unsigned int i; @@ -442,18 +443,19 @@ int sun4i_frontend_update_formats(struct sun4i_frontend *frontend, * I have no idea what this does exactly, but it seems to be * related to the scaler FIR filter phase parameters. */ + ch1_phase_idx = (format->num_planes > 1) ? 1 : 0; regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZPHASE_REG, - frontend->data->ch_phase[0].horzphase); + frontend->data->ch_phase[0]); regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_HORZPHASE_REG, - frontend->data->ch_phase[1].horzphase); + frontend->data->ch_phase[ch1_phase_idx]); regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTPHASE0_REG, - frontend->data->ch_phase[0].vertphase[0]); + frontend->data->ch_phase[0]); regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTPHASE0_REG, - frontend->data->ch_phase[1].vertphase[0]); + frontend->data->ch_phase[ch1_phase_idx]); regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTPHASE1_REG, - frontend->data->ch_phase[0].vertphase[1]); + frontend->data->ch_phase[0]); regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTPHASE1_REG, - frontend->data->ch_phase[1].vertphase[1]); + frontend->data->ch_phase[ch1_phase_idx]); /* * Checking the input format is sufficient since we currently only @@ -687,30 +689,12 @@ static const struct dev_pm_ops sun4i_frontend_pm_ops = { }; static const struct sun4i_frontend_data sun4i_a10_frontend = { - .ch_phase = { - { - .horzphase = 0, - .vertphase = { 0, 0 }, - }, - { - .horzphase = 0xfc000, - .vertphase = { 0xfc000, 0xfc000 }, - }, - }, + .ch_phase = { 0x000, 0xfc000 }, .has_coef_rdy = true, }; static const struct sun4i_frontend_data sun8i_a33_frontend = { - .ch_phase = { - { - .horzphase = 0x400, - .vertphase = { 0x400, 0x400 }, - }, - { - .horzphase = 0x400, - .vertphase = { 0x400, 0x400 }, - }, - }, + .ch_phase = { 0x400, 0xfc400 }, .has_coef_access_ctrl = true, }; diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.h b/drivers/gpu/drm/sun4i/sun4i_frontend.h index 0c382c1ddb0f..2e7b76e50c2b 100644 --- a/drivers/gpu/drm/sun4i/sun4i_frontend.h +++ b/drivers/gpu/drm/sun4i/sun4i_frontend.h @@ -115,11 +115,7 @@ struct reset_control; struct sun4i_frontend_data { bool has_coef_access_ctrl; bool has_coef_rdy; - - struct { - u32 horzphase; - u32 vertphase[2]; - } ch_phase[2]; + u32 ch_phase[2]; }; struct sun4i_frontend { diff --git a/drivers/gpu/drm/v3d/v3d_gem.c b/drivers/gpu/drm/v3d/v3d_gem.c index 915f8bfdb58c..182c586525eb 100644 --- a/drivers/gpu/drm/v3d/v3d_gem.c +++ b/drivers/gpu/drm/v3d/v3d_gem.c @@ -568,7 +568,6 @@ v3d_submit_cl_ioctl(struct drm_device *dev, void *data, ret = v3d_job_init(v3d, file_priv, &bin->base, v3d_job_free, args->in_sync_bcl); if (ret) { - kfree(bin); v3d_job_put(&render->base); kfree(bin); return ret; diff --git a/drivers/gpu/drm/vc4/vc4_bo.c b/drivers/gpu/drm/vc4/vc4_bo.c index 74ceebd62fbc..cc74a3f3a07a 100644 --- a/drivers/gpu/drm/vc4/vc4_bo.c +++ b/drivers/gpu/drm/vc4/vc4_bo.c @@ -449,7 +449,7 @@ struct vc4_bo *vc4_bo_create(struct drm_device *dev, size_t unaligned_size, } if (IS_ERR(cma_obj)) { - struct drm_printer p = drm_info_printer(vc4->dev->dev); + struct drm_printer p = drm_info_printer(vc4->base.dev); DRM_ERROR("Failed to allocate from CMA:\n"); vc4_bo_stats_print(&p, vc4); return ERR_PTR(-ENOMEM); @@ -590,7 +590,7 @@ static void vc4_bo_cache_time_work(struct work_struct *work) { struct vc4_dev *vc4 = container_of(work, struct vc4_dev, bo_cache.time_work); - struct drm_device *dev = vc4->dev; + struct drm_device *dev = &vc4->base; mutex_lock(&vc4->bo_lock); vc4_bo_cache_free_old(dev); @@ -1005,6 +1005,7 @@ int vc4_get_tiling_ioctl(struct drm_device *dev, void *data, return 0; } +static void vc4_bo_cache_destroy(struct drm_device *dev, void *unused); int vc4_bo_cache_init(struct drm_device *dev) { struct vc4_dev *vc4 = to_vc4_dev(dev); @@ -1033,10 +1034,10 @@ int vc4_bo_cache_init(struct drm_device *dev) INIT_WORK(&vc4->bo_cache.time_work, vc4_bo_cache_time_work); timer_setup(&vc4->bo_cache.time_timer, vc4_bo_cache_time_timer, 0); - return 0; + return drmm_add_action_or_reset(dev, vc4_bo_cache_destroy, NULL); } -void vc4_bo_cache_destroy(struct drm_device *dev) +static void vc4_bo_cache_destroy(struct drm_device *dev, void *unused) { struct vc4_dev *vc4 = to_vc4_dev(dev); int i; diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c index f1a5fd5dab6f..839610f8092a 100644 --- a/drivers/gpu/drm/vc4/vc4_drv.c +++ b/drivers/gpu/drm/vc4/vc4_drv.c @@ -257,37 +257,37 @@ static int vc4_drm_bind(struct device *dev) dev->coherent_dma_mask = DMA_BIT_MASK(32); - vc4 = devm_kzalloc(dev, sizeof(*vc4), GFP_KERNEL); - if (!vc4) - return -ENOMEM; - /* If VC4 V3D is missing, don't advertise render nodes. */ node = of_find_matching_node_and_match(NULL, vc4_v3d_dt_match, NULL); if (!node || !of_device_is_available(node)) vc4_drm_driver.driver_features &= ~DRIVER_RENDER; of_node_put(node); - drm = drm_dev_alloc(&vc4_drm_driver, dev); - if (IS_ERR(drm)) - return PTR_ERR(drm); + vc4 = devm_drm_dev_alloc(dev, &vc4_drm_driver, struct vc4_dev, base); + if (IS_ERR(vc4)) + return PTR_ERR(vc4); + + drm = &vc4->base; platform_set_drvdata(pdev, drm); - vc4->dev = drm; - drm->dev_private = vc4; INIT_LIST_HEAD(&vc4->debugfs_list); mutex_init(&vc4->bin_bo_lock); ret = vc4_bo_cache_init(drm); if (ret) - goto dev_put; + return ret; - drm_mode_config_init(drm); + ret = drmm_mode_config_init(drm); + if (ret) + return ret; - vc4_gem_init(drm); + ret = vc4_gem_init(drm); + if (ret) + return ret; ret = component_bind_all(dev, drm); if (ret) - goto gem_destroy; + return ret; ret = vc4_plane_create_additional_planes(drm); if (ret) @@ -312,29 +312,17 @@ static int vc4_drm_bind(struct device *dev) unbind_all: component_unbind_all(dev, drm); -gem_destroy: - vc4_gem_destroy(drm); - vc4_bo_cache_destroy(drm); -dev_put: - drm_dev_put(drm); + return ret; } static void vc4_drm_unbind(struct device *dev) { struct drm_device *drm = dev_get_drvdata(dev); - struct vc4_dev *vc4 = to_vc4_dev(drm); drm_dev_unregister(drm); drm_atomic_helper_shutdown(drm); - - drm_mode_config_cleanup(drm); - - drm_atomic_private_obj_fini(&vc4->load_tracker); - drm_atomic_private_obj_fini(&vc4->ctm_manager); - - drm_dev_put(drm); } static const struct component_master_ops vc4_drm_ops = { diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h index 90b911fd2a7f..19b75bebd35f 100644 --- a/drivers/gpu/drm/vc4/vc4_drv.h +++ b/drivers/gpu/drm/vc4/vc4_drv.h @@ -14,6 +14,7 @@ #include <drm/drm_device.h> #include <drm/drm_encoder.h> #include <drm/drm_gem_cma_helper.h> +#include <drm/drm_managed.h> #include <drm/drm_mm.h> #include <drm/drm_modeset_lock.h> @@ -71,7 +72,7 @@ struct vc4_perfmon { }; struct vc4_dev { - struct drm_device *dev; + struct drm_device base; struct vc4_hvs *hvs; struct vc4_v3d *v3d; @@ -234,7 +235,7 @@ struct vc4_dev { static inline struct vc4_dev * to_vc4_dev(struct drm_device *dev) { - return (struct vc4_dev *)dev->dev_private; + return container_of(dev, struct vc4_dev, base); } struct vc4_bo { @@ -287,7 +288,7 @@ struct vc4_bo { static inline struct vc4_bo * to_vc4_bo(struct drm_gem_object *bo) { - return (struct vc4_bo *)bo; + return container_of(to_drm_gem_cma_obj(bo), struct vc4_bo, base); } struct vc4_fence { @@ -300,7 +301,7 @@ struct vc4_fence { static inline struct vc4_fence * to_vc4_fence(struct dma_fence *fence) { - return (struct vc4_fence *)fence; + return container_of(fence, struct vc4_fence, base); } struct vc4_seqno_cb { @@ -347,7 +348,7 @@ struct vc4_plane { static inline struct vc4_plane * to_vc4_plane(struct drm_plane *plane) { - return (struct vc4_plane *)plane; + return container_of(plane, struct vc4_plane, base); } enum vc4_scaling_mode { @@ -423,7 +424,7 @@ struct vc4_plane_state { static inline struct vc4_plane_state * to_vc4_plane_state(struct drm_plane_state *state) { - return (struct vc4_plane_state *)state; + return container_of(state, struct vc4_plane_state, base); } enum vc4_encoder_type { @@ -499,7 +500,7 @@ struct vc4_crtc { static inline struct vc4_crtc * to_vc4_crtc(struct drm_crtc *crtc) { - return (struct vc4_crtc *)crtc; + return container_of(crtc, struct vc4_crtc, base); } static inline const struct vc4_crtc_data * @@ -537,7 +538,7 @@ struct vc4_crtc_state { static inline struct vc4_crtc_state * to_vc4_crtc_state(struct drm_crtc_state *crtc_state) { - return (struct vc4_crtc_state *)crtc_state; + return container_of(crtc_state, struct vc4_crtc_state, base); } #define V3D_READ(offset) readl(vc4->v3d->regs + offset) @@ -809,7 +810,6 @@ struct drm_gem_object *vc4_prime_import_sg_table(struct drm_device *dev, struct sg_table *sgt); void *vc4_prime_vmap(struct drm_gem_object *obj); int vc4_bo_cache_init(struct drm_device *dev); -void vc4_bo_cache_destroy(struct drm_device *dev); int vc4_bo_inc_usecnt(struct vc4_bo *bo); void vc4_bo_dec_usecnt(struct vc4_bo *bo); void vc4_bo_add_to_purgeable_pool(struct vc4_bo *bo); @@ -874,8 +874,7 @@ extern struct platform_driver vc4_dsi_driver; extern const struct dma_fence_ops vc4_fence_ops; /* vc4_gem.c */ -void vc4_gem_init(struct drm_device *dev); -void vc4_gem_destroy(struct drm_device *dev); +int vc4_gem_init(struct drm_device *dev); int vc4_submit_cl_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); int vc4_wait_seqno_ioctl(struct drm_device *dev, void *data, diff --git a/drivers/gpu/drm/vc4/vc4_gem.c b/drivers/gpu/drm/vc4/vc4_gem.c index 9f01ddd5b932..b641252939d8 100644 --- a/drivers/gpu/drm/vc4/vc4_gem.c +++ b/drivers/gpu/drm/vc4/vc4_gem.c @@ -314,16 +314,16 @@ vc4_reset_work(struct work_struct *work) struct vc4_dev *vc4 = container_of(work, struct vc4_dev, hangcheck.reset_work); - vc4_save_hang_state(vc4->dev); + vc4_save_hang_state(&vc4->base); - vc4_reset(vc4->dev); + vc4_reset(&vc4->base); } static void vc4_hangcheck_elapsed(struct timer_list *t) { struct vc4_dev *vc4 = from_timer(vc4, t, hangcheck.timer); - struct drm_device *dev = vc4->dev; + struct drm_device *dev = &vc4->base; uint32_t ct0ca, ct1ca; unsigned long irqflags; struct vc4_exec_info *bin_exec, *render_exec; @@ -1000,7 +1000,7 @@ vc4_job_handle_completed(struct vc4_dev *vc4) list_del(&exec->head); spin_unlock_irqrestore(&vc4->job_lock, irqflags); - vc4_complete_exec(vc4->dev, exec); + vc4_complete_exec(&vc4->base, exec); spin_lock_irqsave(&vc4->job_lock, irqflags); } @@ -1258,13 +1258,13 @@ vc4_submit_cl_ioctl(struct drm_device *dev, void *data, return 0; fail: - vc4_complete_exec(vc4->dev, exec); + vc4_complete_exec(&vc4->base, exec); return ret; } -void -vc4_gem_init(struct drm_device *dev) +static void vc4_gem_destroy(struct drm_device *dev, void *unused); +int vc4_gem_init(struct drm_device *dev) { struct vc4_dev *vc4 = to_vc4_dev(dev); @@ -1285,10 +1285,11 @@ vc4_gem_init(struct drm_device *dev) INIT_LIST_HEAD(&vc4->purgeable.list); mutex_init(&vc4->purgeable.lock); + + return drmm_add_action_or_reset(dev, vc4_gem_destroy, NULL); } -void -vc4_gem_destroy(struct drm_device *dev) +static void vc4_gem_destroy(struct drm_device *dev, void *unused) { struct vc4_dev *vc4 = to_vc4_dev(dev); diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c index e8f99e290655..95779d50cca0 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c @@ -922,6 +922,7 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai); + struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base; struct device *dev = &vc4_hdmi->pdev->dev; u32 audio_packet_config, channel_mask; u32 channel_map; @@ -981,6 +982,8 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream, HDMI_WRITE(HDMI_AUDIO_PACKET_CONFIG, audio_packet_config); vc4_hdmi_set_n_cts(vc4_hdmi); + vc4_hdmi_set_audio_infoframe(encoder); + return 0; } @@ -988,11 +991,9 @@ static int vc4_hdmi_audio_trigger(struct snd_pcm_substream *substream, int cmd, struct snd_soc_dai *dai) { struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai); - struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base; switch (cmd) { case SNDRV_PCM_TRIGGER_START: - vc4_hdmi_set_audio_infoframe(encoder); vc4_hdmi->audio.streaming = true; if (vc4_hdmi->variant->phy_rng_enable) @@ -1076,6 +1077,7 @@ static const struct snd_soc_dapm_route vc4_hdmi_audio_routes[] = { }; static const struct snd_soc_component_driver vc4_hdmi_audio_component_drv = { + .name = "vc4-hdmi-codec-dai-component", .controls = vc4_hdmi_audio_controls, .num_controls = ARRAY_SIZE(vc4_hdmi_audio_controls), .dapm_widgets = vc4_hdmi_audio_widgets, diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c index 4d0a833366ce..b72b2bd05a81 100644 --- a/drivers/gpu/drm/vc4/vc4_hvs.c +++ b/drivers/gpu/drm/vc4/vc4_hvs.c @@ -560,7 +560,7 @@ static int vc4_hvs_bind(struct device *dev, struct device *master, void *data) { struct platform_device *pdev = to_platform_device(dev); struct drm_device *drm = dev_get_drvdata(master); - struct vc4_dev *vc4 = drm->dev_private; + struct vc4_dev *vc4 = to_vc4_dev(drm); struct vc4_hvs *hvs = NULL; int ret; u32 dispctrl; @@ -679,7 +679,7 @@ static void vc4_hvs_unbind(struct device *dev, struct device *master, void *data) { struct drm_device *drm = dev_get_drvdata(master); - struct vc4_dev *vc4 = drm->dev_private; + struct vc4_dev *vc4 = to_vc4_dev(drm); struct vc4_hvs *hvs = vc4->hvs; if (drm_mm_node_allocated(&vc4->hvs->mitchell_netravali_filter)) diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c index 149825ff5df8..2b951cae04ad 100644 --- a/drivers/gpu/drm/vc4/vc4_kms.c +++ b/drivers/gpu/drm/vc4/vc4_kms.c @@ -51,7 +51,7 @@ static struct vc4_ctm_state *vc4_get_ctm_state(struct drm_atomic_state *state, struct drm_private_obj *manager) { struct drm_device *dev = state->dev; - struct vc4_dev *vc4 = dev->dev_private; + struct vc4_dev *vc4 = to_vc4_dev(dev); struct drm_private_state *priv_state; int ret; @@ -93,6 +93,29 @@ static const struct drm_private_state_funcs vc4_ctm_state_funcs = { .atomic_destroy_state = vc4_ctm_destroy_state, }; +static void vc4_ctm_obj_fini(struct drm_device *dev, void *unused) +{ + struct vc4_dev *vc4 = to_vc4_dev(dev); + + drm_atomic_private_obj_fini(&vc4->ctm_manager); +} + +static int vc4_ctm_obj_init(struct vc4_dev *vc4) +{ + struct vc4_ctm_state *ctm_state; + + drm_modeset_lock_init(&vc4->ctm_state_lock); + + ctm_state = kzalloc(sizeof(*ctm_state), GFP_KERNEL); + if (!ctm_state) + return -ENOMEM; + + drm_atomic_private_obj_init(&vc4->base, &vc4->ctm_manager, &ctm_state->base, + &vc4_ctm_state_funcs); + + return drmm_add_action(&vc4->base, vc4_ctm_obj_fini, NULL); +} + /* Converts a DRM S31.32 value to the HW S0.9 format. */ static u16 vc4_ctm_s31_32_to_s0_9(u64 in) { @@ -609,6 +632,34 @@ static const struct drm_private_state_funcs vc4_load_tracker_state_funcs = { .atomic_destroy_state = vc4_load_tracker_destroy_state, }; +static void vc4_load_tracker_obj_fini(struct drm_device *dev, void *unused) +{ + struct vc4_dev *vc4 = to_vc4_dev(dev); + + if (!vc4->load_tracker_available) + return; + + drm_atomic_private_obj_fini(&vc4->load_tracker); +} + +static int vc4_load_tracker_obj_init(struct vc4_dev *vc4) +{ + struct vc4_load_tracker_state *load_state; + + if (!vc4->load_tracker_available) + return 0; + + load_state = kzalloc(sizeof(*load_state), GFP_KERNEL); + if (!load_state) + return -ENOMEM; + + drm_atomic_private_obj_init(&vc4->base, &vc4->load_tracker, + &load_state->base, + &vc4_load_tracker_state_funcs); + + return drmm_add_action(&vc4->base, vc4_load_tracker_obj_fini, NULL); +} + #define NUM_OUTPUTS 6 #define NUM_CHANNELS 3 @@ -711,8 +762,6 @@ static const struct drm_mode_config_funcs vc4_mode_funcs = { int vc4_kms_load(struct drm_device *dev) { struct vc4_dev *vc4 = to_vc4_dev(dev); - struct vc4_ctm_state *ctm_state; - struct vc4_load_tracker_state *load_state; bool is_vc5 = of_device_is_compatible(dev->dev->of_node, "brcm,bcm2711-vc5"); int ret; @@ -751,26 +800,13 @@ int vc4_kms_load(struct drm_device *dev) dev->mode_config.async_page_flip = true; dev->mode_config.allow_fb_modifiers = true; - drm_modeset_lock_init(&vc4->ctm_state_lock); - - ctm_state = kzalloc(sizeof(*ctm_state), GFP_KERNEL); - if (!ctm_state) - return -ENOMEM; - - drm_atomic_private_obj_init(dev, &vc4->ctm_manager, &ctm_state->base, - &vc4_ctm_state_funcs); - - if (vc4->load_tracker_available) { - load_state = kzalloc(sizeof(*load_state), GFP_KERNEL); - if (!load_state) { - drm_atomic_private_obj_fini(&vc4->ctm_manager); - return -ENOMEM; - } + ret = vc4_ctm_obj_init(vc4); + if (ret) + return ret; - drm_atomic_private_obj_init(dev, &vc4->load_tracker, - &load_state->base, - &vc4_load_tracker_state_funcs); - } + ret = vc4_load_tracker_obj_init(vc4); + if (ret) + return ret; drm_mode_config_reset(dev); diff --git a/drivers/gpu/drm/vc4/vc4_v3d.c b/drivers/gpu/drm/vc4/vc4_v3d.c index f7ab979721b3..65d0dac69b0b 100644 --- a/drivers/gpu/drm/vc4/vc4_v3d.c +++ b/drivers/gpu/drm/vc4/vc4_v3d.c @@ -168,7 +168,7 @@ static void vc4_v3d_init_hw(struct drm_device *dev) int vc4_v3d_get_bin_slot(struct vc4_dev *vc4) { - struct drm_device *dev = vc4->dev; + struct drm_device *dev = &vc4->base; unsigned long irqflags; int slot; uint64_t seqno = 0; @@ -246,7 +246,7 @@ static int bin_bo_alloc(struct vc4_dev *vc4) INIT_LIST_HEAD(&list); while (true) { - struct vc4_bo *bo = vc4_bo_create(vc4->dev, size, true, + struct vc4_bo *bo = vc4_bo_create(&vc4->base, size, true, VC4_BO_TYPE_BIN); if (IS_ERR(bo)) { @@ -361,7 +361,7 @@ static int vc4_v3d_runtime_suspend(struct device *dev) struct vc4_v3d *v3d = dev_get_drvdata(dev); struct vc4_dev *vc4 = v3d->vc4; - vc4_irq_uninstall(vc4->dev); + vc4_irq_uninstall(&vc4->base); clk_disable_unprepare(v3d->clk); @@ -378,11 +378,11 @@ static int vc4_v3d_runtime_resume(struct device *dev) if (ret != 0) return ret; - vc4_v3d_init_hw(vc4->dev); + vc4_v3d_init_hw(&vc4->base); /* We disabled the IRQ as part of vc4_irq_uninstall in suspend. */ - enable_irq(vc4->dev->irq); - vc4_irq_postinstall(vc4->dev); + enable_irq(vc4->base.irq); + vc4_irq_postinstall(&vc4->base); return 0; } diff --git a/drivers/gpu/ipu-v3/ipu-common.c b/drivers/gpu/ipu-v3/ipu-common.c index b3dae9ec1a38..d166ee262ce4 100644 --- a/drivers/gpu/ipu-v3/ipu-common.c +++ b/drivers/gpu/ipu-v3/ipu-common.c @@ -133,73 +133,6 @@ enum ipu_color_space ipu_pixelformat_to_colorspace(u32 pixelformat) } EXPORT_SYMBOL_GPL(ipu_pixelformat_to_colorspace); -bool ipu_pixelformat_is_planar(u32 pixelformat) -{ - switch (pixelformat) { - case V4L2_PIX_FMT_YUV420: - case V4L2_PIX_FMT_YVU420: - case V4L2_PIX_FMT_YUV422P: - case V4L2_PIX_FMT_NV12: - case V4L2_PIX_FMT_NV21: - case V4L2_PIX_FMT_NV16: - case V4L2_PIX_FMT_NV61: - return true; - } - - return false; -} -EXPORT_SYMBOL_GPL(ipu_pixelformat_is_planar); - -enum ipu_color_space ipu_mbus_code_to_colorspace(u32 mbus_code) -{ - switch (mbus_code & 0xf000) { - case 0x1000: - return IPUV3_COLORSPACE_RGB; - case 0x2000: - return IPUV3_COLORSPACE_YUV; - default: - return IPUV3_COLORSPACE_UNKNOWN; - } -} -EXPORT_SYMBOL_GPL(ipu_mbus_code_to_colorspace); - -int ipu_stride_to_bytes(u32 pixel_stride, u32 pixelformat) -{ - switch (pixelformat) { - case V4L2_PIX_FMT_YUV420: - case V4L2_PIX_FMT_YVU420: - case V4L2_PIX_FMT_YUV422P: - case V4L2_PIX_FMT_NV12: - case V4L2_PIX_FMT_NV21: - case V4L2_PIX_FMT_NV16: - case V4L2_PIX_FMT_NV61: - /* - * for the planar YUV formats, the stride passed to - * cpmem must be the stride in bytes of the Y plane. - * And all the planar YUV formats have an 8-bit - * Y component. - */ - return (8 * pixel_stride) >> 3; - case V4L2_PIX_FMT_RGB565: - case V4L2_PIX_FMT_YUYV: - case V4L2_PIX_FMT_UYVY: - return (16 * pixel_stride) >> 3; - case V4L2_PIX_FMT_BGR24: - case V4L2_PIX_FMT_RGB24: - return (24 * pixel_stride) >> 3; - case V4L2_PIX_FMT_BGR32: - case V4L2_PIX_FMT_RGB32: - case V4L2_PIX_FMT_XBGR32: - case V4L2_PIX_FMT_XRGB32: - return (32 * pixel_stride) >> 3; - default: - break; - } - - return -EINVAL; -} -EXPORT_SYMBOL_GPL(ipu_stride_to_bytes); - int ipu_degrees_to_rot_mode(enum ipu_rotate_mode *mode, int degrees, bool hflip, bool vflip) { diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c index b64d2efbefe7..eb56e09ae15f 100644 --- a/drivers/hv/hv_balloon.c +++ b/drivers/hv/hv_balloon.c @@ -1275,7 +1275,7 @@ static void balloon_up(struct work_struct *dummy) /* Refuse to balloon below the floor. */ if (avail_pages < num_pages || avail_pages - num_pages < floor) { - pr_warn("Balloon request will be partially fulfilled. %s\n", + pr_info("Balloon request will be partially fulfilled. %s\n", avail_pages < num_pages ? "Not enough memory." : "Balloon floor reached."); diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c index 6994c1309b2b..cc9e8025c533 100644 --- a/drivers/hwtracing/coresight/coresight-core.c +++ b/drivers/hwtracing/coresight/coresight-core.c @@ -1689,6 +1689,7 @@ static void __exit coresight_exit(void) module_init(coresight_init); module_exit(coresight_exit); +MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Pratik Patel <pratikp@codeaurora.org>"); MODULE_AUTHOR("Mathieu Poirier <mathieu.poirier@linaro.org>"); MODULE_DESCRIPTION("Arm CoreSight tracer driver"); diff --git a/drivers/hwtracing/coresight/coresight-cti-sysfs.c b/drivers/hwtracing/coresight/coresight-cti-sysfs.c index 392757f3a019..7ff7e7780bbf 100644 --- a/drivers/hwtracing/coresight/coresight-cti-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-cti-sysfs.c @@ -1065,6 +1065,13 @@ static int cti_create_con_sysfs_attr(struct device *dev, } eattr->var = con; con->con_attrs[attr_idx] = &eattr->attr.attr; + /* + * Initialize the dynamically allocated attribute + * to avoid LOCKDEP splat. See include/linux/sysfs.h + * for more details. + */ + sysfs_attr_init(con->con_attrs[attr_idx]); + return 0; } diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index c2c9b127d074..bdc34ca449f7 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -210,7 +210,7 @@ static void *etm_setup_aux(struct perf_event *event, void **pages, u32 id; int cpu = event->cpu; cpumask_t *mask; - struct coresight_device *sink; + struct coresight_device *sink = NULL; struct etm_event_data *event_data = NULL; event_data = alloc_event_data(cpu); diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index 56f5b8077cba..01bace49a962 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -1239,7 +1239,7 @@ static void __init intel_idle_init_cstates_acpi(struct cpuidle_driver *drv) struct acpi_processor_cx *cx; struct cpuidle_state *state; - if (intel_idle_max_cstate_reached(cstate)) + if (intel_idle_max_cstate_reached(cstate - 1)) break; cx = &acpi_state_table.states[cstate]; diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 7c2ab1f2fbea..a77750b8954d 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -405,10 +405,10 @@ static int cma_comp_exch(struct rdma_id_private *id_priv, /* * The FSM uses a funny double locking where state is protected by both * the handler_mutex and the spinlock. State is not allowed to change - * away from a handler_mutex protected value without also holding + * to/from a handler_mutex protected value without also holding * handler_mutex. */ - if (comp == RDMA_CM_CONNECT) + if (comp == RDMA_CM_CONNECT || exch == RDMA_CM_CONNECT) lockdep_assert_held(&id_priv->handler_mutex); spin_lock_irqsave(&id_priv->lock, flags); @@ -4038,17 +4038,23 @@ out: return ret; } -int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param) +/** + * rdma_connect_locked - Initiate an active connection request. + * @id: Connection identifier to connect. + * @conn_param: Connection information used for connected QPs. + * + * Same as rdma_connect() but can only be called from the + * RDMA_CM_EVENT_ROUTE_RESOLVED handler callback. + */ +int rdma_connect_locked(struct rdma_cm_id *id, + struct rdma_conn_param *conn_param) { struct rdma_id_private *id_priv = container_of(id, struct rdma_id_private, id); int ret; - mutex_lock(&id_priv->handler_mutex); - if (!cma_comp_exch(id_priv, RDMA_CM_ROUTE_RESOLVED, RDMA_CM_CONNECT)) { - ret = -EINVAL; - goto err_unlock; - } + if (!cma_comp_exch(id_priv, RDMA_CM_ROUTE_RESOLVED, RDMA_CM_CONNECT)) + return -EINVAL; if (!id->qp) { id_priv->qp_num = conn_param->qp_num; @@ -4066,11 +4072,33 @@ int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param) ret = -ENOSYS; if (ret) goto err_state; - mutex_unlock(&id_priv->handler_mutex); return 0; err_state: cma_comp_exch(id_priv, RDMA_CM_CONNECT, RDMA_CM_ROUTE_RESOLVED); -err_unlock: + return ret; +} +EXPORT_SYMBOL(rdma_connect_locked); + +/** + * rdma_connect - Initiate an active connection request. + * @id: Connection identifier to connect. + * @conn_param: Connection information used for connected QPs. + * + * Users must have resolved a route for the rdma_cm_id to connect with by having + * called rdma_resolve_route before calling this routine. + * + * This call will either connect to a remote QP or obtain remote QP information + * for unconnected rdma_cm_id's. The actual operation is based on the + * rdma_cm_id's port space. + */ +int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param) +{ + struct rdma_id_private *id_priv = + container_of(id, struct rdma_id_private, id); + int ret; + + mutex_lock(&id_priv->handler_mutex); + ret = rdma_connect_locked(id, conn_param); mutex_unlock(&id_priv->handler_mutex); return ret; } diff --git a/drivers/infiniband/core/uverbs_std_types_device.c b/drivers/infiniband/core/uverbs_std_types_device.c index f367d523a46b..302f898c5833 100644 --- a/drivers/infiniband/core/uverbs_std_types_device.c +++ b/drivers/infiniband/core/uverbs_std_types_device.c @@ -401,9 +401,6 @@ static int UVERBS_HANDLER(UVERBS_METHOD_QUERY_GID_ENTRY)( if (!rdma_is_port_valid(ib_dev, port_num)) return -EINVAL; - if (!rdma_ib_or_roce(ib_dev, port_num)) - return -EOPNOTSUPP; - gid_attr = rdma_get_gid_attr(ib_dev, port_num, gid_index); if (IS_ERR(gid_attr)) return PTR_ERR(gid_attr); diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index 89e04ca62ae0..246e3cbe0b2c 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -3305,7 +3305,8 @@ static int mlx5_add_netdev_notifier(struct mlx5_ib_dev *dev, u8 port_num) int err; dev->port[port_num].roce.nb.notifier_call = mlx5_netdev_event; - err = register_netdevice_notifier(&dev->port[port_num].roce.nb); + err = register_netdevice_notifier_net(mlx5_core_net(dev->mdev), + &dev->port[port_num].roce.nb); if (err) { dev->port[port_num].roce.nb.notifier_call = NULL; return err; @@ -3317,7 +3318,8 @@ static int mlx5_add_netdev_notifier(struct mlx5_ib_dev *dev, u8 port_num) static void mlx5_remove_netdev_notifier(struct mlx5_ib_dev *dev, u8 port_num) { if (dev->port[port_num].roce.nb.notifier_call) { - unregister_netdevice_notifier(&dev->port[port_num].roce.nb); + unregister_netdevice_notifier_net(mlx5_core_net(dev->mdev), + &dev->port[port_num].roce.nb); dev->port[port_num].roce.nb.notifier_call = NULL; } } diff --git a/drivers/infiniband/hw/qedr/qedr_iw_cm.c b/drivers/infiniband/hw/qedr/qedr_iw_cm.c index c7169d2c69e5..c4bc58736e48 100644 --- a/drivers/infiniband/hw/qedr/qedr_iw_cm.c +++ b/drivers/infiniband/hw/qedr/qedr_iw_cm.c @@ -727,6 +727,7 @@ int qedr_iw_destroy_listen(struct iw_cm_id *cm_id) listener->qed_handle); cm_id->rem_ref(cm_id); + kfree(listener); return rc; } diff --git a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.h b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.h index f0e5ffba2d51..97ed8f952f6e 100644 --- a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.h +++ b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.h @@ -176,7 +176,7 @@ struct pvrdma_port_attr { u8 subnet_timeout; u8 init_type_reply; u8 active_width; - u16 active_speed; + u8 active_speed; u8 phys_state; u8 reserved[2]; }; diff --git a/drivers/infiniband/sw/rdmavt/vt.c b/drivers/infiniband/sw/rdmavt/vt.c index 52218684ad4a..670a9623b46e 100644 --- a/drivers/infiniband/sw/rdmavt/vt.c +++ b/drivers/infiniband/sw/rdmavt/vt.c @@ -524,6 +524,7 @@ static noinline int check_support(struct rvt_dev_info *rdi, int verb) int rvt_register_device(struct rvt_dev_info *rdi) { int ret = 0, i; + u64 dma_mask; if (!rdi) return -EINVAL; @@ -580,8 +581,10 @@ int rvt_register_device(struct rvt_dev_info *rdi) /* DMA Operations */ rdi->ibdev.dev.dma_parms = rdi->ibdev.dev.parent->dma_parms; - dma_set_coherent_mask(&rdi->ibdev.dev, - rdi->ibdev.dev.parent->coherent_dma_mask); + dma_mask = IS_ENABLED(CONFIG_64BIT) ? DMA_BIT_MASK(64) : DMA_BIT_MASK(32); + ret = dma_coerce_mask_and_coherent(&rdi->ibdev.dev, dma_mask); + if (ret) + goto bail_wss; /* Protection Domain */ spin_lock_init(&rdi->n_pds_lock); diff --git a/drivers/infiniband/sw/rxe/rxe_av.c b/drivers/infiniband/sw/rxe/rxe_av.c index 38021e2c8688..df0d173d6acb 100644 --- a/drivers/infiniband/sw/rxe/rxe_av.c +++ b/drivers/infiniband/sw/rxe/rxe_av.c @@ -16,15 +16,24 @@ void rxe_init_av(struct rdma_ah_attr *attr, struct rxe_av *av) int rxe_av_chk_attr(struct rxe_dev *rxe, struct rdma_ah_attr *attr) { + const struct ib_global_route *grh = rdma_ah_read_grh(attr); struct rxe_port *port; + int type; port = &rxe->port; if (rdma_ah_get_ah_flags(attr) & IB_AH_GRH) { - u8 sgid_index = rdma_ah_read_grh(attr)->sgid_index; + if (grh->sgid_index > port->attr.gid_tbl_len) { + pr_warn("invalid sgid index = %d\n", + grh->sgid_index); + return -EINVAL; + } - if (sgid_index > port->attr.gid_tbl_len) { - pr_warn("invalid sgid index = %d\n", sgid_index); + type = rdma_gid_attr_network_type(grh->sgid_attr); + if (type < RDMA_NETWORK_IPV4 || + type > RDMA_NETWORK_IPV6) { + pr_warn("invalid network type for rdma_rxe = %d\n", + type); return -EINVAL; } } @@ -65,11 +74,29 @@ void rxe_av_to_attr(struct rxe_av *av, struct rdma_ah_attr *attr) void rxe_av_fill_ip_info(struct rxe_av *av, struct rdma_ah_attr *attr) { const struct ib_gid_attr *sgid_attr = attr->grh.sgid_attr; + int ibtype; + int type; rdma_gid2ip((struct sockaddr *)&av->sgid_addr, &sgid_attr->gid); rdma_gid2ip((struct sockaddr *)&av->dgid_addr, &rdma_ah_read_grh(attr)->dgid); - av->network_type = rdma_gid_attr_network_type(sgid_attr); + + ibtype = rdma_gid_attr_network_type(sgid_attr); + + switch (ibtype) { + case RDMA_NETWORK_IPV4: + type = RXE_NETWORK_TYPE_IPV4; + break; + case RDMA_NETWORK_IPV6: + type = RXE_NETWORK_TYPE_IPV4; + break; + default: + /* not reached - checked in rxe_av_chk_attr */ + type = 0; + break; + } + + av->network_type = type; } struct rxe_av *rxe_get_av(struct rxe_pkt_info *pkt) diff --git a/drivers/infiniband/sw/rxe/rxe_net.c b/drivers/infiniband/sw/rxe/rxe_net.c index 575e1a4ec821..34bef7d8e6b4 100644 --- a/drivers/infiniband/sw/rxe/rxe_net.c +++ b/drivers/infiniband/sw/rxe/rxe_net.c @@ -442,7 +442,7 @@ struct sk_buff *rxe_init_packet(struct rxe_dev *rxe, struct rxe_av *av, if (IS_ERR(attr)) return NULL; - if (av->network_type == RXE_NETWORK_TYPE_IPV6) + if (av->network_type == RXE_NETWORK_TYPE_IPV4) hdr_len = ETH_HLEN + sizeof(struct udphdr) + sizeof(struct iphdr); else diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.c b/drivers/infiniband/sw/rxe/rxe_verbs.c index 1fc022362fbe..f9c832e82552 100644 --- a/drivers/infiniband/sw/rxe/rxe_verbs.c +++ b/drivers/infiniband/sw/rxe/rxe_verbs.c @@ -1118,6 +1118,7 @@ int rxe_register_device(struct rxe_dev *rxe, const char *ibdev_name) int err; struct ib_device *dev = &rxe->ib_dev; struct crypto_shash *tfm; + u64 dma_mask; strlcpy(dev->node_desc, "rxe", sizeof(dev->node_desc)); @@ -1130,7 +1131,10 @@ int rxe_register_device(struct rxe_dev *rxe, const char *ibdev_name) rxe->ndev->dev_addr); dev->dev.dma_parms = &rxe->dma_parms; dma_set_max_seg_size(&dev->dev, UINT_MAX); - dma_set_coherent_mask(&dev->dev, dma_get_required_mask(&dev->dev)); + dma_mask = IS_ENABLED(CONFIG_64BIT) ? DMA_BIT_MASK(64) : DMA_BIT_MASK(32); + err = dma_coerce_mask_and_coherent(&dev->dev, dma_mask); + if (err) + return err; dev->uverbs_cmd_mask = BIT_ULL(IB_USER_VERBS_CMD_GET_CONTEXT) | BIT_ULL(IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL) diff --git a/drivers/infiniband/sw/siw/siw_main.c b/drivers/infiniband/sw/siw/siw_main.c index ca8bc7296867..181e06c1c43d 100644 --- a/drivers/infiniband/sw/siw/siw_main.c +++ b/drivers/infiniband/sw/siw/siw_main.c @@ -306,6 +306,7 @@ static struct siw_device *siw_device_create(struct net_device *netdev) struct siw_device *sdev = NULL; struct ib_device *base_dev; struct device *parent = netdev->dev.parent; + u64 dma_mask; int rv; if (!parent) { @@ -384,8 +385,10 @@ static struct siw_device *siw_device_create(struct net_device *netdev) base_dev->dev.parent = parent; base_dev->dev.dma_parms = &sdev->dma_parms; dma_set_max_seg_size(&base_dev->dev, UINT_MAX); - dma_set_coherent_mask(&base_dev->dev, - dma_get_required_mask(&base_dev->dev)); + dma_mask = IS_ENABLED(CONFIG_64BIT) ? DMA_BIT_MASK(64) : DMA_BIT_MASK(32); + if (dma_coerce_mask_and_coherent(&base_dev->dev, dma_mask)) + goto error; + base_dev->num_comp_vectors = num_possible_cpus(); xa_init_flags(&sdev->qp_xa, XA_FLAGS_ALLOC1); diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c index 2f3ebc0a75d9..2bd18b006893 100644 --- a/drivers/infiniband/ulp/iser/iser_verbs.c +++ b/drivers/infiniband/ulp/iser/iser_verbs.c @@ -620,7 +620,7 @@ static void iser_route_handler(struct rdma_cm_id *cma_id) conn_param.private_data = (void *)&req_hdr; conn_param.private_data_len = sizeof(struct iser_cm_hdr); - ret = rdma_connect(cma_id, &conn_param); + ret = rdma_connect_locked(cma_id, &conn_param); if (ret) { iser_err("failure connecting: %d\n", ret); goto failure; diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c index 776e89231c52..f298adc02acb 100644 --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c @@ -1674,9 +1674,9 @@ static int rtrs_rdma_route_resolved(struct rtrs_clt_con *con) uuid_copy(&msg.sess_uuid, &sess->s.uuid); uuid_copy(&msg.paths_uuid, &clt->paths_uuid); - err = rdma_connect(con->c.cm_id, ¶m); + err = rdma_connect_locked(con->c.cm_id, ¶m); if (err) - rtrs_err(clt, "rdma_connect(): %d\n", err); + rtrs_err(clt, "rdma_connect_locked(): %d\n", err); return err; } diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 0065eb17ae36..53a8becac827 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -622,10 +622,11 @@ static int srpt_refresh_port(struct srpt_port *sport) /** * srpt_unregister_mad_agent - unregister MAD callback functions * @sdev: SRPT HCA pointer. + * @port_cnt: number of ports with registered MAD * * Note: It is safe to call this function more than once for the same device. */ -static void srpt_unregister_mad_agent(struct srpt_device *sdev) +static void srpt_unregister_mad_agent(struct srpt_device *sdev, int port_cnt) { struct ib_port_modify port_modify = { .clr_port_cap_mask = IB_PORT_DEVICE_MGMT_SUP, @@ -633,7 +634,7 @@ static void srpt_unregister_mad_agent(struct srpt_device *sdev) struct srpt_port *sport; int i; - for (i = 1; i <= sdev->device->phys_port_cnt; i++) { + for (i = 1; i <= port_cnt; i++) { sport = &sdev->port[i - 1]; WARN_ON(sport->port != i); if (sport->mad_agent) { @@ -3185,7 +3186,8 @@ static int srpt_add_one(struct ib_device *device) if (ret) { pr_err("MAD registration failed for %s-%d.\n", dev_name(&sdev->device->dev), i); - goto err_event; + i--; + goto err_port; } } @@ -3197,7 +3199,8 @@ static int srpt_add_one(struct ib_device *device) pr_debug("added %s.\n", dev_name(&device->dev)); return 0; -err_event: +err_port: + srpt_unregister_mad_agent(sdev, i); ib_unregister_event_handler(&sdev->event_handler); err_cm: if (sdev->cm_id) @@ -3221,7 +3224,7 @@ static void srpt_remove_one(struct ib_device *device, void *client_data) struct srpt_device *sdev = client_data; int i; - srpt_unregister_mad_agent(sdev); + srpt_unregister_mad_agent(sdev, sdev->device->phys_port_cnt); ib_unregister_event_handler(&sdev->event_handler); diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.h b/drivers/infiniband/ulp/srpt/ib_srpt.h index 41435a699b53..bdeb010efee6 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.h +++ b/drivers/infiniband/ulp/srpt/ib_srpt.h @@ -256,6 +256,7 @@ enum rdma_ch_state { * @rdma_cm: See below. * @rdma_cm.cm_id: RDMA CM ID associated with the channel. * @cq: IB completion queue for this channel. + * @cq_size: Number of CQEs in @cq. * @zw_cqe: Zero-length write CQE. * @rcu: RCU head. * @kref: kref for this channel. diff --git a/drivers/interconnect/core.c b/drivers/interconnect/core.c index eea47b4c84aa..974a66725d09 100644 --- a/drivers/interconnect/core.c +++ b/drivers/interconnect/core.c @@ -971,6 +971,9 @@ void icc_node_add(struct icc_node *node, struct icc_provider *provider) } node->avg_bw = node->init_avg; node->peak_bw = node->init_peak; + if (provider->aggregate) + provider->aggregate(node, 0, node->init_avg, node->init_peak, + &node->avg_bw, &node->peak_bw); provider->set(node, node); node->avg_bw = 0; node->peak_bw = 0; diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c index cf10a4b9611b..bf01d09dba6c 100644 --- a/drivers/interconnect/qcom/icc-rpmh.c +++ b/drivers/interconnect/qcom/icc-rpmh.c @@ -79,6 +79,7 @@ EXPORT_SYMBOL_GPL(qcom_icc_aggregate); int qcom_icc_set(struct icc_node *src, struct icc_node *dst) { struct qcom_icc_provider *qp; + struct qcom_icc_node *qn; struct icc_node *node; if (!src) @@ -87,6 +88,12 @@ int qcom_icc_set(struct icc_node *src, struct icc_node *dst) node = src; qp = to_qcom_provider(node->provider); + qn = node->data; + + qn->sum_avg[QCOM_ICC_BUCKET_AMC] = max_t(u64, qn->sum_avg[QCOM_ICC_BUCKET_AMC], + node->avg_bw); + qn->max_peak[QCOM_ICC_BUCKET_AMC] = max_t(u64, qn->max_peak[QCOM_ICC_BUCKET_AMC], + node->peak_bw); qcom_icc_bcm_voter_commit(qp->voter); diff --git a/drivers/interconnect/qcom/sc7180.c b/drivers/interconnect/qcom/sc7180.c index bf11b82ed55c..8d9044ed18ab 100644 --- a/drivers/interconnect/qcom/sc7180.c +++ b/drivers/interconnect/qcom/sc7180.c @@ -553,6 +553,9 @@ static int qnoc_probe(struct platform_device *pdev) return ret; } + for (i = 0; i < qp->num_bcms; i++) + qcom_icc_bcm_init(qp->bcms[i], &pdev->dev); + for (i = 0; i < num_nodes; i++) { size_t j; @@ -576,9 +579,6 @@ static int qnoc_probe(struct platform_device *pdev) } data->num_nodes = num_nodes; - for (i = 0; i < qp->num_bcms; i++) - qcom_icc_bcm_init(qp->bcms[i], &pdev->dev); - platform_set_drvdata(pdev, qp); return 0; diff --git a/drivers/interconnect/qcom/sdm845.c b/drivers/interconnect/qcom/sdm845.c index d79e3163e2c3..5304aea3b058 100644 --- a/drivers/interconnect/qcom/sdm845.c +++ b/drivers/interconnect/qcom/sdm845.c @@ -151,7 +151,7 @@ DEFINE_QBCM(bcm_mc0, "MC0", true, &ebi); DEFINE_QBCM(bcm_sh0, "SH0", true, &qns_llcc); DEFINE_QBCM(bcm_mm0, "MM0", false, &qns_mem_noc_hf); DEFINE_QBCM(bcm_sh1, "SH1", false, &qns_apps_io); -DEFINE_QBCM(bcm_mm1, "MM1", false, &qxm_camnoc_hf0_uncomp, &qxm_camnoc_hf1_uncomp, &qxm_camnoc_sf_uncomp, &qxm_camnoc_hf0, &qxm_camnoc_hf1, &qxm_mdp0, &qxm_mdp1); +DEFINE_QBCM(bcm_mm1, "MM1", true, &qxm_camnoc_hf0_uncomp, &qxm_camnoc_hf1_uncomp, &qxm_camnoc_sf_uncomp, &qxm_camnoc_hf0, &qxm_camnoc_hf1, &qxm_mdp0, &qxm_mdp1); DEFINE_QBCM(bcm_sh2, "SH2", false, &qns_memnoc_snoc); DEFINE_QBCM(bcm_mm2, "MM2", false, &qns2_mem_noc); DEFINE_QBCM(bcm_sh3, "SH3", false, &acm_tcu); @@ -489,6 +489,9 @@ static int qnoc_probe(struct platform_device *pdev) return ret; } + for (i = 0; i < qp->num_bcms; i++) + qcom_icc_bcm_init(qp->bcms[i], &pdev->dev); + for (i = 0; i < num_nodes; i++) { size_t j; @@ -512,9 +515,6 @@ static int qnoc_probe(struct platform_device *pdev) } data->num_nodes = num_nodes; - for (i = 0; i < qp->num_bcms; i++) - qcom_icc_bcm_init(qp->bcms[i], &pdev->dev); - platform_set_drvdata(pdev, qp); return 0; diff --git a/drivers/interconnect/qcom/sm8150.c b/drivers/interconnect/qcom/sm8150.c index 9218efed04a0..c76b2c7f9b10 100644 --- a/drivers/interconnect/qcom/sm8150.c +++ b/drivers/interconnect/qcom/sm8150.c @@ -551,6 +551,9 @@ static int qnoc_probe(struct platform_device *pdev) return ret; } + for (i = 0; i < qp->num_bcms; i++) + qcom_icc_bcm_init(qp->bcms[i], &pdev->dev); + for (i = 0; i < num_nodes; i++) { size_t j; @@ -574,9 +577,6 @@ static int qnoc_probe(struct platform_device *pdev) } data->num_nodes = num_nodes; - for (i = 0; i < qp->num_bcms; i++) - qcom_icc_bcm_init(qp->bcms[i], &pdev->dev); - platform_set_drvdata(pdev, qp); return 0; @@ -627,6 +627,7 @@ static struct platform_driver qnoc_driver = { .driver = { .name = "qnoc-sm8150", .of_match_table = qnoc_of_match, + .sync_state = icc_sync_state, }, }; module_platform_driver(qnoc_driver); diff --git a/drivers/interconnect/qcom/sm8250.c b/drivers/interconnect/qcom/sm8250.c index 9b58946f7898..cc558fec74e3 100644 --- a/drivers/interconnect/qcom/sm8250.c +++ b/drivers/interconnect/qcom/sm8250.c @@ -567,6 +567,9 @@ static int qnoc_probe(struct platform_device *pdev) return ret; } + for (i = 0; i < qp->num_bcms; i++) + qcom_icc_bcm_init(qp->bcms[i], &pdev->dev); + for (i = 0; i < num_nodes; i++) { size_t j; @@ -590,9 +593,6 @@ static int qnoc_probe(struct platform_device *pdev) } data->num_nodes = num_nodes; - for (i = 0; i < qp->num_bcms; i++) - qcom_icc_bcm_init(qp->bcms[i], &pdev->dev); - platform_set_drvdata(pdev, qp); return 0; @@ -643,6 +643,7 @@ static struct platform_driver qnoc_driver = { .driver = { .name = "qnoc-sm8250", .of_match_table = qnoc_of_match, + .sync_state = icc_sync_state, }, }; module_platform_driver(qnoc_driver); diff --git a/drivers/iommu/amd/amd_iommu_types.h b/drivers/iommu/amd/amd_iommu_types.h index f696ac7c5f89..89647700bab2 100644 --- a/drivers/iommu/amd/amd_iommu_types.h +++ b/drivers/iommu/amd/amd_iommu_types.h @@ -409,7 +409,11 @@ extern bool amd_iommu_np_cache; /* Only true if all IOMMUs support device IOTLBs */ extern bool amd_iommu_iotlb_sup; -#define MAX_IRQS_PER_TABLE 256 +/* + * AMD IOMMU hardware only support 512 IRTEs despite + * the architectural limitation of 2048 entries. + */ +#define MAX_IRQS_PER_TABLE 512 #define IRQ_TABLE_ALIGNMENT 128 struct irq_remap_table { diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 8651f6d4dfa0..1b1ca63e6bbe 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -2525,6 +2525,9 @@ struct dmar_domain *find_domain(struct device *dev) { struct device_domain_info *info; + if (unlikely(!dev || !dev->iommu)) + return NULL; + if (unlikely(attach_deferred(dev))) return NULL; diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c index f1861fa3d0e4..3242ebd0bca3 100644 --- a/drivers/iommu/intel/svm.c +++ b/drivers/iommu/intel/svm.c @@ -279,6 +279,7 @@ int intel_svm_bind_gpasid(struct iommu_domain *domain, struct device *dev, struct intel_iommu *iommu = device_to_iommu(dev, NULL, NULL); struct intel_svm_dev *sdev = NULL; struct dmar_domain *dmar_domain; + struct device_domain_info *info; struct intel_svm *svm = NULL; int ret = 0; @@ -310,6 +311,10 @@ int intel_svm_bind_gpasid(struct iommu_domain *domain, struct device *dev, if (data->hpasid <= 0 || data->hpasid >= PASID_MAX) return -EINVAL; + info = get_domain_info(dev); + if (!info) + return -EINVAL; + dmar_domain = to_dmar_domain(domain); mutex_lock(&pasid_mutex); @@ -357,6 +362,7 @@ int intel_svm_bind_gpasid(struct iommu_domain *domain, struct device *dev, goto out; } sdev->dev = dev; + sdev->sid = PCI_DEVID(info->bus, info->devfn); /* Only count users if device has aux domains */ if (iommu_dev_feature_enabled(dev, IOMMU_DEV_FEAT_AUX)) @@ -1029,7 +1035,7 @@ no_pasid: resp.qw0 = QI_PGRP_PASID(req->pasid) | QI_PGRP_DID(req->rid) | QI_PGRP_PASID_P(req->pasid_present) | - QI_PGRP_PDP(req->pasid_present) | + QI_PGRP_PDP(req->priv_data_present) | QI_PGRP_RESP_CODE(result) | QI_PGRP_RESP_TYPE; resp.qw1 = QI_PGRP_IDX(req->prg_index) | diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c index 8c470f451a32..b53446bb8c6b 100644 --- a/drivers/iommu/iommu.c +++ b/drivers/iommu/iommu.c @@ -2071,7 +2071,7 @@ EXPORT_SYMBOL_GPL(iommu_uapi_cache_invalidate); static int iommu_check_bind_data(struct iommu_gpasid_bind_data *data) { - u32 mask; + u64 mask; int i; if (data->version != IOMMU_GPASID_BIND_VERSION_1) diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index a5ef9faf71c7..e7f0d4ae0f96 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -1176,8 +1176,10 @@ mptscsih_remove(struct pci_dev *pdev) MPT_SCSI_HOST *hd; int sz1; - if((hd = shost_priv(host)) == NULL) - return; + if (host == NULL) + hd = NULL; + else + hd = shost_priv(host); mptscsih_shutdown(pdev); @@ -1193,14 +1195,15 @@ mptscsih_remove(struct pci_dev *pdev) "Free'd ScsiLookup (%d) memory\n", ioc->name, sz1)); - kfree(hd->info_kbuf); + if (hd) + kfree(hd->info_kbuf); /* NULL the Scsi_Host pointer */ ioc->sh = NULL; - scsi_host_put(host); - + if (host) + scsi_host_put(host); mpt_detach(pdev); } diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index d5ce8082b0a0..fafa8b0d8099 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -474,7 +474,6 @@ source "drivers/misc/lis3lv02d/Kconfig" source "drivers/misc/altera-stapl/Kconfig" source "drivers/misc/mei/Kconfig" source "drivers/misc/vmw_vmci/Kconfig" -source "drivers/misc/mic/Kconfig" source "drivers/misc/genwqe/Kconfig" source "drivers/misc/echo/Kconfig" source "drivers/misc/cxl/Kconfig" diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 2521359e8ef7..d23231e73330 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -46,7 +46,6 @@ obj-$(CONFIG_VMWARE_VMCI) += vmw_vmci/ obj-$(CONFIG_LATTICE_ECP3_CONFIG) += lattice-ecp3-config.o obj-$(CONFIG_SRAM) += sram.o obj-$(CONFIG_SRAM_EXEC) += sram-exec.o -obj-y += mic/ obj-$(CONFIG_GENWQE) += genwqe/ obj-$(CONFIG_ECHO) += echo/ obj-$(CONFIG_CXL_BASE) += cxl/ diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h index 8bac86c4d86b..df2fb9520dd8 100644 --- a/drivers/misc/mei/hw.h +++ b/drivers/misc/mei/hw.h @@ -224,7 +224,7 @@ struct mei_ext_hdr { u8 type; u8 length; u8 ext_payload[2]; - u8 hdr[0]; + u8 hdr[]; }; /** @@ -238,7 +238,7 @@ struct mei_ext_meta_hdr { u8 count; u8 size; u8 reserved[2]; - struct mei_ext_hdr hdrs[0]; + struct mei_ext_hdr hdrs[]; }; /* @@ -308,7 +308,7 @@ struct mei_msg_hdr { u32 dma_ring:1; u32 internal:1; u32 msg_complete:1; - u32 extension[0]; + u32 extension[]; } __packed; /* The length is up to 9 bits */ diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig deleted file mode 100644 index 8a7c2c5711d5..000000000000 --- a/drivers/misc/mic/Kconfig +++ /dev/null @@ -1,141 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -menu "Intel MIC & related support" - -config INTEL_MIC_BUS - tristate "Intel MIC Bus Driver" - depends on 64BIT && PCI && X86 - select DMA_OPS - help - This option is selected by any driver which registers a - device or driver on the MIC Bus, such as CONFIG_INTEL_MIC_HOST, - CONFIG_INTEL_MIC_CARD, CONFIG_INTEL_MIC_X100_DMA etc. - - If you are building a host/card kernel with an Intel MIC device - then say M (recommended) or Y, else say N. If unsure say N. - - More information about the Intel MIC family as well as the Linux - OS and tools for MIC to use with this driver are available from - <http://software.intel.com/en-us/mic-developer>. - -config SCIF_BUS - tristate "SCIF Bus Driver" - depends on 64BIT && PCI && X86 - select DMA_OPS - help - This option is selected by any driver which registers a - device or driver on the SCIF Bus, such as CONFIG_INTEL_MIC_HOST - and CONFIG_INTEL_MIC_CARD. - - If you are building a host/card kernel with an Intel MIC device - then say M (recommended) or Y, else say N. If unsure say N. - - More information about the Intel MIC family as well as the Linux - OS and tools for MIC to use with this driver are available from - <http://software.intel.com/en-us/mic-developer>. - -config VOP_BUS - tristate "VOP Bus Driver" - depends on HAS_DMA - select DMA_OPS - help - This option is selected by any driver which registers a - device or driver on the VOP Bus, such as CONFIG_INTEL_MIC_HOST - and CONFIG_INTEL_MIC_CARD. - - If you are building a host/card kernel with an Intel MIC device - then say M (recommended) or Y, else say N. If unsure say N. - - More information about the Intel MIC family as well as the Linux - OS and tools for MIC to use with this driver are available from - <http://software.intel.com/en-us/mic-developer>. - -config INTEL_MIC_HOST - tristate "Intel MIC Host Driver" - depends on 64BIT && PCI && X86 - depends on INTEL_MIC_BUS && SCIF_BUS && MIC_COSM && VOP_BUS - select DMA_OPS - help - This enables Host Driver support for the Intel Many Integrated - Core (MIC) family of PCIe form factor coprocessor devices that - run a 64 bit Linux OS. The driver manages card OS state and - enables communication between host and card. Intel MIC X100 - devices are currently supported. - - If you are building a host kernel with an Intel MIC device then - say M (recommended) or Y, else say N. If unsure say N. - - More information about the Intel MIC family as well as the Linux - OS and tools for MIC to use with this driver are available from - <http://software.intel.com/en-us/mic-developer>. - -config INTEL_MIC_CARD - tristate "Intel MIC Card Driver" - depends on 64BIT && X86 - depends on INTEL_MIC_BUS && SCIF_BUS && MIC_COSM && VOP_BUS - select VIRTIO - help - This enables card driver support for the Intel Many Integrated - Core (MIC) device family. The card driver communicates shutdown/ - crash events to the host and allows registration/configuration of - virtio devices. Intel MIC X100 devices are currently supported. - - If you are building a card kernel for an Intel MIC device then - say M (recommended) or Y, else say N. If unsure say N. - - For more information see - <http://software.intel.com/en-us/mic-developer>. - -config SCIF - tristate "SCIF Driver" - depends on 64BIT && PCI && X86 && SCIF_BUS && IOMMU_SUPPORT - select IOMMU_IOVA - help - This enables SCIF Driver support for the Intel Many Integrated - Core (MIC) family of PCIe form factor coprocessor devices that - run a 64 bit Linux OS. The Symmetric Communication Interface - (SCIF (pronounced as skiff)) is a low level communications API - across PCIe currently implemented for MIC. - - If you are building a host kernel with an Intel MIC device then - say M (recommended) or Y, else say N. If unsure say N. - - More information about the Intel MIC family as well as the Linux - OS and tools for MIC to use with this driver are available from - <http://software.intel.com/en-us/mic-developer>. - -config MIC_COSM - tristate "Intel MIC Coprocessor State Management (COSM) Drivers" - depends on 64BIT && PCI && X86 && SCIF - help - This enables COSM driver support for the Intel Many - Integrated Core (MIC) family of PCIe form factor coprocessor - devices. COSM drivers implement functions such as boot, - shutdown, reset and reboot of MIC devices. - - If you are building a host kernel with an Intel MIC device then - say M (recommended) or Y, else say N. If unsure say N. - - More information about the Intel MIC family as well as the Linux - OS and tools for MIC to use with this driver are available from - <http://software.intel.com/en-us/mic-developer>. - -config VOP - tristate "VOP Driver" - depends on VOP_BUS - select VHOST_RING - select VIRTIO - help - This enables VOP (Virtio over PCIe) Driver support for the Intel - Many Integrated Core (MIC) family of PCIe form factor coprocessor - devices. The VOP driver allows virtio drivers, e.g. net, console - and block drivers, on the card connect to user space virtio - devices on the host. - - If you are building a host kernel with an Intel MIC device then - say M (recommended) or Y, else say N. If unsure say N. - - More information about the Intel MIC family as well as the Linux - OS and tools for MIC to use with this driver are available from - <http://software.intel.com/en-us/mic-developer>. - -endmenu diff --git a/drivers/misc/mic/Makefile b/drivers/misc/mic/Makefile deleted file mode 100644 index 1a43622b183f..000000000000 --- a/drivers/misc/mic/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile - Intel MIC Linux driver. -# Copyright(c) 2013, Intel Corporation. -# -obj-$(CONFIG_INTEL_MIC_HOST) += host/ -obj-$(CONFIG_INTEL_MIC_CARD) += card/ -obj-y += bus/ -obj-$(CONFIG_SCIF) += scif/ -obj-$(CONFIG_MIC_COSM) += cosm/ -obj-$(CONFIG_MIC_COSM) += cosm_client/ -obj-$(CONFIG_VOP) += vop/ diff --git a/drivers/misc/mic/bus/Makefile b/drivers/misc/mic/bus/Makefile deleted file mode 100644 index 0a6aa21b2f67..000000000000 --- a/drivers/misc/mic/bus/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile - Intel MIC Linux driver. -# Copyright(c) 2014, Intel Corporation. -# -obj-$(CONFIG_INTEL_MIC_BUS) += mic_bus.o -obj-$(CONFIG_SCIF_BUS) += scif_bus.o -obj-$(CONFIG_MIC_COSM) += cosm_bus.o -obj-$(CONFIG_VOP_BUS) += vop_bus.o diff --git a/drivers/misc/mic/bus/cosm_bus.c b/drivers/misc/mic/bus/cosm_bus.c deleted file mode 100644 index 5f2141c71738..000000000000 --- a/drivers/misc/mic/bus/cosm_bus.c +++ /dev/null @@ -1,130 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2015 Intel Corporation. - * - * Intel MIC COSM Bus Driver - */ -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/idr.h> -#include "cosm_bus.h" - -/* Unique numbering for cosm devices. */ -static DEFINE_IDA(cosm_index_ida); - -static int cosm_dev_probe(struct device *d) -{ - struct cosm_device *dev = dev_to_cosm(d); - struct cosm_driver *drv = drv_to_cosm(dev->dev.driver); - - return drv->probe(dev); -} - -static int cosm_dev_remove(struct device *d) -{ - struct cosm_device *dev = dev_to_cosm(d); - struct cosm_driver *drv = drv_to_cosm(dev->dev.driver); - - drv->remove(dev); - return 0; -} - -static struct bus_type cosm_bus = { - .name = "cosm_bus", - .probe = cosm_dev_probe, - .remove = cosm_dev_remove, -}; - -int cosm_register_driver(struct cosm_driver *driver) -{ - driver->driver.bus = &cosm_bus; - return driver_register(&driver->driver); -} -EXPORT_SYMBOL_GPL(cosm_register_driver); - -void cosm_unregister_driver(struct cosm_driver *driver) -{ - driver_unregister(&driver->driver); -} -EXPORT_SYMBOL_GPL(cosm_unregister_driver); - -static inline void cosm_release_dev(struct device *d) -{ - struct cosm_device *cdev = dev_to_cosm(d); - - kfree(cdev); -} - -struct cosm_device * -cosm_register_device(struct device *pdev, struct cosm_hw_ops *hw_ops) -{ - struct cosm_device *cdev; - int ret; - - cdev = kzalloc(sizeof(*cdev), GFP_KERNEL); - if (!cdev) - return ERR_PTR(-ENOMEM); - - cdev->dev.parent = pdev; - cdev->dev.release = cosm_release_dev; - cdev->hw_ops = hw_ops; - dev_set_drvdata(&cdev->dev, cdev); - cdev->dev.bus = &cosm_bus; - - /* Assign a unique device index and hence name */ - ret = ida_simple_get(&cosm_index_ida, 0, 0, GFP_KERNEL); - if (ret < 0) - goto free_cdev; - - cdev->index = ret; - cdev->dev.id = ret; - dev_set_name(&cdev->dev, "cosm-dev%u", cdev->index); - - ret = device_register(&cdev->dev); - if (ret) - goto ida_remove; - return cdev; -ida_remove: - ida_simple_remove(&cosm_index_ida, cdev->index); -free_cdev: - put_device(&cdev->dev); - return ERR_PTR(ret); -} -EXPORT_SYMBOL_GPL(cosm_register_device); - -void cosm_unregister_device(struct cosm_device *dev) -{ - int index = dev->index; /* save for after device release */ - - device_unregister(&dev->dev); - ida_simple_remove(&cosm_index_ida, index); -} -EXPORT_SYMBOL_GPL(cosm_unregister_device); - -struct cosm_device *cosm_find_cdev_by_id(int id) -{ - struct device *dev = subsys_find_device_by_id(&cosm_bus, id, NULL); - - return dev ? container_of(dev, struct cosm_device, dev) : NULL; -} -EXPORT_SYMBOL_GPL(cosm_find_cdev_by_id); - -static int __init cosm_init(void) -{ - return bus_register(&cosm_bus); -} - -static void __exit cosm_exit(void) -{ - bus_unregister(&cosm_bus); - ida_destroy(&cosm_index_ida); -} - -core_initcall(cosm_init); -module_exit(cosm_exit); - -MODULE_AUTHOR("Intel Corporation"); -MODULE_DESCRIPTION("Intel(R) MIC card OS state management bus driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/mic/bus/cosm_bus.h b/drivers/misc/mic/bus/cosm_bus.h deleted file mode 100644 index d50d7aea168d..000000000000 --- a/drivers/misc/mic/bus/cosm_bus.h +++ /dev/null @@ -1,125 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2015 Intel Corporation. - * - * Intel MIC COSM Bus Driver - */ -#ifndef _COSM_BUS_H_ -#define _COSM_BUS_H_ - -#include <linux/scif.h> -#include <linux/mic_common.h> -#include "../common/mic_dev.h" - -/** - * cosm_device - representation of a cosm device - * - * @attr_group: Pointer to list of sysfs attribute groups. - * @sdev: Device for sysfs entries. - * @state: MIC state. - * @prev_state: MIC state previous to MIC_RESETTING - * @shutdown_status: MIC status reported by card for shutdown/crashes. - * @shutdown_status_int: Internal shutdown status maintained by the driver - * @cosm_mutex: Mutex for synchronizing access to data structures. - * @reset_trigger_work: Work for triggering reset requests. - * @scif_work: Work for handling per device SCIF connections - * @cmdline: Kernel command line. - * @firmware: Firmware file name. - * @ramdisk: Ramdisk file name. - * @bootmode: Boot mode i.e. "linux" or "elf" for flash updates. - * @log_buf_addr: Log buffer address for MIC. - * @log_buf_len: Log buffer length address for MIC. - * @state_sysfs: Sysfs dirent for notifying ring 3 about MIC state changes. - * @hw_ops: the hardware bus ops for this device. - * @dev: underlying device. - * @index: unique position on the cosm bus - * @dbg_dir: debug fs directory - * @newepd: new endpoint from scif accept to be assigned to this cdev - * @epd: SCIF endpoint for this cdev - * @heartbeat_watchdog_enable: if heartbeat watchdog is enabled for this cdev - * @sysfs_heartbeat_enable: sysfs setting for disabling heartbeat notification - */ -struct cosm_device { - const struct attribute_group **attr_group; - struct device *sdev; - u8 state; - u8 prev_state; - u8 shutdown_status; - u8 shutdown_status_int; - struct mutex cosm_mutex; - struct work_struct reset_trigger_work; - struct work_struct scif_work; - char *cmdline; - char *firmware; - char *ramdisk; - char *bootmode; - void *log_buf_addr; - int *log_buf_len; - struct kernfs_node *state_sysfs; - struct cosm_hw_ops *hw_ops; - struct device dev; - int index; - struct dentry *dbg_dir; - scif_epd_t newepd; - scif_epd_t epd; - bool heartbeat_watchdog_enable; - bool sysfs_heartbeat_enable; -}; - -/** - * cosm_driver - operations for a cosm driver - * - * @driver: underlying device driver (populate name and owner). - * @probe: the function to call when a device is found. Returns 0 or -errno. - * @remove: the function to call when a device is removed. - */ -struct cosm_driver { - struct device_driver driver; - int (*probe)(struct cosm_device *dev); - void (*remove)(struct cosm_device *dev); -}; - -/** - * cosm_hw_ops - cosm bus ops - * - * @reset: trigger MIC reset - * @force_reset: force MIC reset - * @post_reset: inform MIC reset is complete - * @ready: is MIC ready for OS download - * @start: boot MIC - * @stop: prepare MIC for reset - * @family: return MIC HW family string - * @stepping: return MIC HW stepping string - * @aper: return MIC PCIe aperture - */ -struct cosm_hw_ops { - void (*reset)(struct cosm_device *cdev); - void (*force_reset)(struct cosm_device *cdev); - void (*post_reset)(struct cosm_device *cdev, enum mic_states state); - bool (*ready)(struct cosm_device *cdev); - int (*start)(struct cosm_device *cdev, int id); - void (*stop)(struct cosm_device *cdev, bool force); - ssize_t (*family)(struct cosm_device *cdev, char *buf); - ssize_t (*stepping)(struct cosm_device *cdev, char *buf); - struct mic_mw *(*aper)(struct cosm_device *cdev); -}; - -struct cosm_device * -cosm_register_device(struct device *pdev, struct cosm_hw_ops *hw_ops); -void cosm_unregister_device(struct cosm_device *dev); -int cosm_register_driver(struct cosm_driver *drv); -void cosm_unregister_driver(struct cosm_driver *drv); -struct cosm_device *cosm_find_cdev_by_id(int id); - -static inline struct cosm_device *dev_to_cosm(struct device *dev) -{ - return container_of(dev, struct cosm_device, dev); -} - -static inline struct cosm_driver *drv_to_cosm(struct device_driver *drv) -{ - return container_of(drv, struct cosm_driver, driver); -} -#endif /* _COSM_BUS_H */ diff --git a/drivers/misc/mic/bus/mic_bus.c b/drivers/misc/mic/bus/mic_bus.c deleted file mode 100644 index a08cb29692a8..000000000000 --- a/drivers/misc/mic/bus/mic_bus.c +++ /dev/null @@ -1,194 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel MIC Bus driver. - * - * This implementation is very similar to the the virtio bus driver - * implementation @ drivers/virtio/virtio.c - */ -#include <linux/dma-map-ops.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/idr.h> -#include <linux/mic_bus.h> - -static ssize_t device_show(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct mbus_device *dev = dev_to_mbus(d); - return sprintf(buf, "0x%04x\n", dev->id.device); -} -static DEVICE_ATTR_RO(device); - -static ssize_t vendor_show(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct mbus_device *dev = dev_to_mbus(d); - return sprintf(buf, "0x%04x\n", dev->id.vendor); -} -static DEVICE_ATTR_RO(vendor); - -static ssize_t modalias_show(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct mbus_device *dev = dev_to_mbus(d); - return sprintf(buf, "mbus:d%08Xv%08X\n", - dev->id.device, dev->id.vendor); -} -static DEVICE_ATTR_RO(modalias); - -static struct attribute *mbus_dev_attrs[] = { - &dev_attr_device.attr, - &dev_attr_vendor.attr, - &dev_attr_modalias.attr, - NULL, -}; -ATTRIBUTE_GROUPS(mbus_dev); - -static inline int mbus_id_match(const struct mbus_device *dev, - const struct mbus_device_id *id) -{ - if (id->device != dev->id.device && id->device != MBUS_DEV_ANY_ID) - return 0; - - return id->vendor == MBUS_DEV_ANY_ID || id->vendor == dev->id.vendor; -} - -/* - * This looks through all the IDs a driver claims to support. If any of them - * match, we return 1 and the kernel will call mbus_dev_probe(). - */ -static int mbus_dev_match(struct device *dv, struct device_driver *dr) -{ - unsigned int i; - struct mbus_device *dev = dev_to_mbus(dv); - const struct mbus_device_id *ids; - - ids = drv_to_mbus(dr)->id_table; - for (i = 0; ids[i].device; i++) - if (mbus_id_match(dev, &ids[i])) - return 1; - return 0; -} - -static int mbus_uevent(struct device *dv, struct kobj_uevent_env *env) -{ - struct mbus_device *dev = dev_to_mbus(dv); - - return add_uevent_var(env, "MODALIAS=mbus:d%08Xv%08X", - dev->id.device, dev->id.vendor); -} - -static int mbus_dev_probe(struct device *d) -{ - int err; - struct mbus_device *dev = dev_to_mbus(d); - struct mbus_driver *drv = drv_to_mbus(dev->dev.driver); - - err = drv->probe(dev); - if (!err) - if (drv->scan) - drv->scan(dev); - return err; -} - -static int mbus_dev_remove(struct device *d) -{ - struct mbus_device *dev = dev_to_mbus(d); - struct mbus_driver *drv = drv_to_mbus(dev->dev.driver); - - drv->remove(dev); - return 0; -} - -static struct bus_type mic_bus = { - .name = "mic_bus", - .match = mbus_dev_match, - .dev_groups = mbus_dev_groups, - .uevent = mbus_uevent, - .probe = mbus_dev_probe, - .remove = mbus_dev_remove, -}; - -int mbus_register_driver(struct mbus_driver *driver) -{ - driver->driver.bus = &mic_bus; - return driver_register(&driver->driver); -} -EXPORT_SYMBOL_GPL(mbus_register_driver); - -void mbus_unregister_driver(struct mbus_driver *driver) -{ - driver_unregister(&driver->driver); -} -EXPORT_SYMBOL_GPL(mbus_unregister_driver); - -static void mbus_release_dev(struct device *d) -{ - struct mbus_device *mbdev = dev_to_mbus(d); - kfree(mbdev); -} - -struct mbus_device * -mbus_register_device(struct device *pdev, int id, const struct dma_map_ops *dma_ops, - struct mbus_hw_ops *hw_ops, int index, - void __iomem *mmio_va) -{ - int ret; - struct mbus_device *mbdev; - - mbdev = kzalloc(sizeof(*mbdev), GFP_KERNEL); - if (!mbdev) - return ERR_PTR(-ENOMEM); - - mbdev->mmio_va = mmio_va; - mbdev->dev.parent = pdev; - mbdev->id.device = id; - mbdev->id.vendor = MBUS_DEV_ANY_ID; - mbdev->dev.dma_ops = dma_ops; - mbdev->dev.dma_mask = &mbdev->dev.coherent_dma_mask; - dma_set_mask(&mbdev->dev, DMA_BIT_MASK(64)); - mbdev->dev.release = mbus_release_dev; - mbdev->hw_ops = hw_ops; - mbdev->dev.bus = &mic_bus; - mbdev->index = index; - dev_set_name(&mbdev->dev, "mbus-dev%u", mbdev->index); - /* - * device_register() causes the bus infrastructure to look for a - * matching driver. - */ - ret = device_register(&mbdev->dev); - if (ret) - goto free_mbdev; - return mbdev; -free_mbdev: - put_device(&mbdev->dev); - return ERR_PTR(ret); -} -EXPORT_SYMBOL_GPL(mbus_register_device); - -void mbus_unregister_device(struct mbus_device *mbdev) -{ - device_unregister(&mbdev->dev); -} -EXPORT_SYMBOL_GPL(mbus_unregister_device); - -static int __init mbus_init(void) -{ - return bus_register(&mic_bus); -} - -static void __exit mbus_exit(void) -{ - bus_unregister(&mic_bus); -} - -core_initcall(mbus_init); -module_exit(mbus_exit); - -MODULE_AUTHOR("Intel Corporation"); -MODULE_DESCRIPTION("Intel(R) MIC Bus driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/mic/bus/scif_bus.c b/drivers/misc/mic/bus/scif_bus.c deleted file mode 100644 index ad7c3604f151..000000000000 --- a/drivers/misc/mic/bus/scif_bus.c +++ /dev/null @@ -1,201 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel Symmetric Communications Interface Bus driver. - */ -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/idr.h> -#include <linux/dma-map-ops.h> - -#include "scif_bus.h" - -static ssize_t device_show(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct scif_hw_dev *dev = dev_to_scif(d); - - return sprintf(buf, "0x%04x\n", dev->id.device); -} -static DEVICE_ATTR_RO(device); - -static ssize_t vendor_show(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct scif_hw_dev *dev = dev_to_scif(d); - - return sprintf(buf, "0x%04x\n", dev->id.vendor); -} -static DEVICE_ATTR_RO(vendor); - -static ssize_t modalias_show(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct scif_hw_dev *dev = dev_to_scif(d); - - return sprintf(buf, "scif:d%08Xv%08X\n", - dev->id.device, dev->id.vendor); -} -static DEVICE_ATTR_RO(modalias); - -static struct attribute *scif_dev_attrs[] = { - &dev_attr_device.attr, - &dev_attr_vendor.attr, - &dev_attr_modalias.attr, - NULL, -}; -ATTRIBUTE_GROUPS(scif_dev); - -static inline int scif_id_match(const struct scif_hw_dev *dev, - const struct scif_hw_dev_id *id) -{ - if (id->device != dev->id.device && id->device != SCIF_DEV_ANY_ID) - return 0; - - return id->vendor == SCIF_DEV_ANY_ID || id->vendor == dev->id.vendor; -} - -/* - * This looks through all the IDs a driver claims to support. If any of them - * match, we return 1 and the kernel will call scif_dev_probe(). - */ -static int scif_dev_match(struct device *dv, struct device_driver *dr) -{ - unsigned int i; - struct scif_hw_dev *dev = dev_to_scif(dv); - const struct scif_hw_dev_id *ids; - - ids = drv_to_scif(dr)->id_table; - for (i = 0; ids[i].device; i++) - if (scif_id_match(dev, &ids[i])) - return 1; - return 0; -} - -static int scif_uevent(struct device *dv, struct kobj_uevent_env *env) -{ - struct scif_hw_dev *dev = dev_to_scif(dv); - - return add_uevent_var(env, "MODALIAS=scif:d%08Xv%08X", - dev->id.device, dev->id.vendor); -} - -static int scif_dev_probe(struct device *d) -{ - struct scif_hw_dev *dev = dev_to_scif(d); - struct scif_driver *drv = drv_to_scif(dev->dev.driver); - - return drv->probe(dev); -} - -static int scif_dev_remove(struct device *d) -{ - struct scif_hw_dev *dev = dev_to_scif(d); - struct scif_driver *drv = drv_to_scif(dev->dev.driver); - - drv->remove(dev); - return 0; -} - -static struct bus_type scif_bus = { - .name = "scif_bus", - .match = scif_dev_match, - .dev_groups = scif_dev_groups, - .uevent = scif_uevent, - .probe = scif_dev_probe, - .remove = scif_dev_remove, -}; - -int scif_register_driver(struct scif_driver *driver) -{ - driver->driver.bus = &scif_bus; - return driver_register(&driver->driver); -} -EXPORT_SYMBOL_GPL(scif_register_driver); - -void scif_unregister_driver(struct scif_driver *driver) -{ - driver_unregister(&driver->driver); -} -EXPORT_SYMBOL_GPL(scif_unregister_driver); - -static void scif_release_dev(struct device *d) -{ - struct scif_hw_dev *sdev = dev_to_scif(d); - - kfree(sdev); -} - -struct scif_hw_dev * -scif_register_device(struct device *pdev, int id, const struct dma_map_ops *dma_ops, - struct scif_hw_ops *hw_ops, u8 dnode, u8 snode, - struct mic_mw *mmio, struct mic_mw *aper, void *dp, - void __iomem *rdp, struct dma_chan **chan, int num_chan, - bool card_rel_da) -{ - int ret; - struct scif_hw_dev *sdev; - - sdev = kzalloc(sizeof(*sdev), GFP_KERNEL); - if (!sdev) - return ERR_PTR(-ENOMEM); - - sdev->dev.parent = pdev; - sdev->id.device = id; - sdev->id.vendor = SCIF_DEV_ANY_ID; - sdev->dev.dma_ops = dma_ops; - sdev->dev.release = scif_release_dev; - sdev->hw_ops = hw_ops; - sdev->dnode = dnode; - sdev->snode = snode; - dev_set_drvdata(&sdev->dev, sdev); - sdev->dev.bus = &scif_bus; - sdev->mmio = mmio; - sdev->aper = aper; - sdev->dp = dp; - sdev->rdp = rdp; - sdev->dev.dma_mask = &sdev->dev.coherent_dma_mask; - dma_set_mask(&sdev->dev, DMA_BIT_MASK(64)); - sdev->dma_ch = chan; - sdev->num_dma_ch = num_chan; - sdev->card_rel_da = card_rel_da; - dev_set_name(&sdev->dev, "scif-dev%u", sdev->dnode); - /* - * device_register() causes the bus infrastructure to look for a - * matching driver. - */ - ret = device_register(&sdev->dev); - if (ret) - goto free_sdev; - return sdev; -free_sdev: - put_device(&sdev->dev); - return ERR_PTR(ret); -} -EXPORT_SYMBOL_GPL(scif_register_device); - -void scif_unregister_device(struct scif_hw_dev *sdev) -{ - device_unregister(&sdev->dev); -} -EXPORT_SYMBOL_GPL(scif_unregister_device); - -static int __init scif_init(void) -{ - return bus_register(&scif_bus); -} - -static void __exit scif_exit(void) -{ - bus_unregister(&scif_bus); -} - -core_initcall(scif_init); -module_exit(scif_exit); - -MODULE_AUTHOR("Intel Corporation"); -MODULE_DESCRIPTION("Intel(R) SCIF Bus driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/mic/bus/scif_bus.h b/drivers/misc/mic/bus/scif_bus.h deleted file mode 100644 index 4981eb56f879..000000000000 --- a/drivers/misc/mic/bus/scif_bus.h +++ /dev/null @@ -1,125 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel Symmetric Communications Interface Bus driver. - */ -#ifndef _SCIF_BUS_H_ -#define _SCIF_BUS_H_ -/* - * Everything a scif driver needs to work with any particular scif - * hardware abstraction layer. - */ -#include <linux/dma-map-ops.h> - -#include <linux/mic_common.h> -#include "../common/mic_dev.h" - -struct scif_hw_dev_id { - u32 device; - u32 vendor; -}; - -#define MIC_SCIF_DEV 1 -#define SCIF_DEV_ANY_ID 0xffffffff - -/** - * scif_hw_dev - representation of a hardware device abstracted for scif - * @hw_ops: the hardware ops supported by this device - * @id: the device type identification (used to match it with a driver) - * @mmio: MMIO memory window - * @aper: Aperture memory window - * @dev: underlying device - * @dnode - The destination node which this device will communicate with. - * @snode - The source node for this device. - * @dp - Self device page - * @rdp - Remote device page - * @dma_ch - Array of DMA channels - * @num_dma_ch - Number of DMA channels available - * @card_rel_da - Set to true if DMA addresses programmed in the DMA engine - * are relative to the card point of view - */ -struct scif_hw_dev { - struct scif_hw_ops *hw_ops; - struct scif_hw_dev_id id; - struct mic_mw *mmio; - struct mic_mw *aper; - struct device dev; - u8 dnode; - u8 snode; - void *dp; - void __iomem *rdp; - struct dma_chan **dma_ch; - int num_dma_ch; - bool card_rel_da; -}; - -/** - * scif_driver - operations for a scif I/O driver - * @driver: underlying device driver (populate name and owner). - * @id_table: the ids serviced by this driver. - * @probe: the function to call when a device is found. Returns 0 or -errno. - * @remove: the function to call when a device is removed. - */ -struct scif_driver { - struct device_driver driver; - const struct scif_hw_dev_id *id_table; - int (*probe)(struct scif_hw_dev *dev); - void (*remove)(struct scif_hw_dev *dev); -}; - -/** - * scif_hw_ops - Hardware operations for accessing a SCIF device on the SCIF bus. - * - * @next_db: Obtain the next available doorbell. - * @request_irq: Request an interrupt on a particular doorbell. - * @free_irq: Free an interrupt requested previously. - * @ack_interrupt: acknowledge an interrupt in the ISR. - * @send_intr: Send an interrupt to the remote node on a specified doorbell. - * @send_p2p_intr: Send an interrupt to the peer node on a specified doorbell - * which is specifically targeted for a peer to peer node. - * @remap: Map a buffer with the specified physical address and length. - * @unmap: Unmap a buffer previously mapped. - */ -struct scif_hw_ops { - int (*next_db)(struct scif_hw_dev *sdev); - struct mic_irq * (*request_irq)(struct scif_hw_dev *sdev, - irqreturn_t (*func)(int irq, - void *data), - const char *name, void *data, - int db); - void (*free_irq)(struct scif_hw_dev *sdev, - struct mic_irq *cookie, void *data); - void (*ack_interrupt)(struct scif_hw_dev *sdev, int num); - void (*send_intr)(struct scif_hw_dev *sdev, int db); - void (*send_p2p_intr)(struct scif_hw_dev *sdev, int db, - struct mic_mw *mw); - void __iomem * (*remap)(struct scif_hw_dev *sdev, - phys_addr_t pa, size_t len); - void (*unmap)(struct scif_hw_dev *sdev, void __iomem *va); -}; - -int scif_register_driver(struct scif_driver *driver); -void scif_unregister_driver(struct scif_driver *driver); -struct scif_hw_dev * -scif_register_device(struct device *pdev, int id, - const struct dma_map_ops *dma_ops, - struct scif_hw_ops *hw_ops, u8 dnode, u8 snode, - struct mic_mw *mmio, struct mic_mw *aper, - void *dp, void __iomem *rdp, - struct dma_chan **chan, int num_chan, - bool card_rel_da); -void scif_unregister_device(struct scif_hw_dev *sdev); - -static inline struct scif_hw_dev *dev_to_scif(struct device *dev) -{ - return container_of(dev, struct scif_hw_dev, dev); -} - -static inline struct scif_driver *drv_to_scif(struct device_driver *drv) -{ - return container_of(drv, struct scif_driver, driver); -} -#endif /* _SCIF_BUS_H */ diff --git a/drivers/misc/mic/bus/vop_bus.c b/drivers/misc/mic/bus/vop_bus.c deleted file mode 100644 index 6935ddca1bd5..000000000000 --- a/drivers/misc/mic/bus/vop_bus.c +++ /dev/null @@ -1,194 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2016 Intel Corporation. - * - * Intel Virtio Over PCIe (VOP) Bus driver. - */ -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/idr.h> -#include <linux/dma-map-ops.h> - -#include "vop_bus.h" - -static ssize_t device_show(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct vop_device *dev = dev_to_vop(d); - - return sprintf(buf, "0x%04x\n", dev->id.device); -} -static DEVICE_ATTR_RO(device); - -static ssize_t vendor_show(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct vop_device *dev = dev_to_vop(d); - - return sprintf(buf, "0x%04x\n", dev->id.vendor); -} -static DEVICE_ATTR_RO(vendor); - -static ssize_t modalias_show(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct vop_device *dev = dev_to_vop(d); - - return sprintf(buf, "vop:d%08Xv%08X\n", - dev->id.device, dev->id.vendor); -} -static DEVICE_ATTR_RO(modalias); - -static struct attribute *vop_dev_attrs[] = { - &dev_attr_device.attr, - &dev_attr_vendor.attr, - &dev_attr_modalias.attr, - NULL, -}; -ATTRIBUTE_GROUPS(vop_dev); - -static inline int vop_id_match(const struct vop_device *dev, - const struct vop_device_id *id) -{ - if (id->device != dev->id.device && id->device != VOP_DEV_ANY_ID) - return 0; - - return id->vendor == VOP_DEV_ANY_ID || id->vendor == dev->id.vendor; -} - -/* - * This looks through all the IDs a driver claims to support. If any of them - * match, we return 1 and the kernel will call vop_dev_probe(). - */ -static int vop_dev_match(struct device *dv, struct device_driver *dr) -{ - unsigned int i; - struct vop_device *dev = dev_to_vop(dv); - const struct vop_device_id *ids; - - ids = drv_to_vop(dr)->id_table; - for (i = 0; ids[i].device; i++) - if (vop_id_match(dev, &ids[i])) - return 1; - return 0; -} - -static int vop_uevent(struct device *dv, struct kobj_uevent_env *env) -{ - struct vop_device *dev = dev_to_vop(dv); - - return add_uevent_var(env, "MODALIAS=vop:d%08Xv%08X", - dev->id.device, dev->id.vendor); -} - -static int vop_dev_probe(struct device *d) -{ - struct vop_device *dev = dev_to_vop(d); - struct vop_driver *drv = drv_to_vop(dev->dev.driver); - - return drv->probe(dev); -} - -static int vop_dev_remove(struct device *d) -{ - struct vop_device *dev = dev_to_vop(d); - struct vop_driver *drv = drv_to_vop(dev->dev.driver); - - drv->remove(dev); - return 0; -} - -static struct bus_type vop_bus = { - .name = "vop_bus", - .match = vop_dev_match, - .dev_groups = vop_dev_groups, - .uevent = vop_uevent, - .probe = vop_dev_probe, - .remove = vop_dev_remove, -}; - -int vop_register_driver(struct vop_driver *driver) -{ - driver->driver.bus = &vop_bus; - return driver_register(&driver->driver); -} -EXPORT_SYMBOL_GPL(vop_register_driver); - -void vop_unregister_driver(struct vop_driver *driver) -{ - driver_unregister(&driver->driver); -} -EXPORT_SYMBOL_GPL(vop_unregister_driver); - -static void vop_release_dev(struct device *d) -{ - struct vop_device *dev = dev_to_vop(d); - - kfree(dev); -} - -struct vop_device * -vop_register_device(struct device *pdev, int id, - const struct dma_map_ops *dma_ops, - struct vop_hw_ops *hw_ops, u8 dnode, struct mic_mw *aper, - struct dma_chan *chan) -{ - int ret; - struct vop_device *vdev; - - vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); - if (!vdev) - return ERR_PTR(-ENOMEM); - - vdev->dev.parent = pdev; - vdev->id.device = id; - vdev->id.vendor = VOP_DEV_ANY_ID; - vdev->dev.dma_ops = dma_ops; - vdev->dev.dma_mask = &vdev->dev.coherent_dma_mask; - dma_set_mask(&vdev->dev, DMA_BIT_MASK(64)); - vdev->dev.release = vop_release_dev; - vdev->hw_ops = hw_ops; - vdev->dev.bus = &vop_bus; - vdev->dnode = dnode; - vdev->aper = aper; - vdev->dma_ch = chan; - vdev->index = dnode - 1; - dev_set_name(&vdev->dev, "vop-dev%u", vdev->index); - /* - * device_register() causes the bus infrastructure to look for a - * matching driver. - */ - ret = device_register(&vdev->dev); - if (ret) - goto free_vdev; - return vdev; -free_vdev: - put_device(&vdev->dev); - return ERR_PTR(ret); -} -EXPORT_SYMBOL_GPL(vop_register_device); - -void vop_unregister_device(struct vop_device *dev) -{ - device_unregister(&dev->dev); -} -EXPORT_SYMBOL_GPL(vop_unregister_device); - -static int __init vop_init(void) -{ - return bus_register(&vop_bus); -} - -static void __exit vop_exit(void) -{ - bus_unregister(&vop_bus); -} - -core_initcall(vop_init); -module_exit(vop_exit); - -MODULE_AUTHOR("Intel Corporation"); -MODULE_DESCRIPTION("Intel(R) VOP Bus driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/mic/bus/vop_bus.h b/drivers/misc/mic/bus/vop_bus.h deleted file mode 100644 index 4fa02808c1e2..000000000000 --- a/drivers/misc/mic/bus/vop_bus.h +++ /dev/null @@ -1,129 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2016 Intel Corporation. - * - * Intel Virtio over PCIe Bus driver. - */ -#ifndef _VOP_BUS_H_ -#define _VOP_BUS_H_ -/* - * Everything a vop driver needs to work with any particular vop - * implementation. - */ -#include <linux/dmaengine.h> -#include <linux/interrupt.h> - -#include "../common/mic_dev.h" - -struct vop_device_id { - u32 device; - u32 vendor; -}; - -#define VOP_DEV_TRNSP 1 -#define VOP_DEV_ANY_ID 0xffffffff -/* - * Size of the internal buffer used during DMA's as an intermediate buffer - * for copy to/from user. Must be an integral number of pages. - */ -#define VOP_INT_DMA_BUF_SIZE PAGE_ALIGN(64 * 1024ULL) - -/** - * vop_device - representation of a device using vop - * @hw_ops: the hardware ops supported by this device. - * @id: the device type identification (used to match it with a driver). - * @dev: underlying device. - * @dnode - The destination node which this device will communicate with. - * @aper: Aperture memory window - * @dma_ch - DMA channel - * @index: unique position on the vop bus - */ -struct vop_device { - struct vop_hw_ops *hw_ops; - struct vop_device_id id; - struct device dev; - u8 dnode; - struct mic_mw *aper; - struct dma_chan *dma_ch; - int index; -}; - -/** - * vop_driver - operations for a vop I/O driver - * @driver: underlying device driver (populate name and owner). - * @id_table: the ids serviced by this driver. - * @probe: the function to call when a device is found. Returns 0 or -errno. - * @remove: the function to call when a device is removed. - */ -struct vop_driver { - struct device_driver driver; - const struct vop_device_id *id_table; - int (*probe)(struct vop_device *dev); - void (*remove)(struct vop_device *dev); -}; - -/** - * vop_hw_ops - Hardware operations for accessing a VOP device on the VOP bus. - * - * @next_db: Obtain the next available doorbell. - * @request_irq: Request an interrupt on a particular doorbell. - * @free_irq: Free an interrupt requested previously. - * @ack_interrupt: acknowledge an interrupt in the ISR. - * @get_remote_dp: Get access to the virtio device page used by the remote - * node to add/remove/configure virtio devices. - * @get_dp: Get access to the virtio device page used by the self - * node to add/remove/configure virtio devices. - * @send_intr: Send an interrupt to the peer node on a specified doorbell. - * @remap: Map a buffer with the specified DMA address and length. - * @unmap: Unmap a buffer previously mapped. - * @dma_filter: The DMA filter function to use for obtaining access to - * a DMA channel on the peer node. - */ -struct vop_hw_ops { - int (*next_db)(struct vop_device *vpdev); - struct mic_irq *(*request_irq)(struct vop_device *vpdev, - irqreturn_t (*func)(int irq, void *data), - const char *name, void *data, - int intr_src); - void (*free_irq)(struct vop_device *vpdev, - struct mic_irq *cookie, void *data); - void (*ack_interrupt)(struct vop_device *vpdev, int num); - void __iomem * (*get_remote_dp)(struct vop_device *vpdev); - void * (*get_dp)(struct vop_device *vpdev); - void (*send_intr)(struct vop_device *vpdev, int db); - void __iomem * (*remap)(struct vop_device *vpdev, - dma_addr_t pa, size_t len); - void (*unmap)(struct vop_device *vpdev, void __iomem *va); -}; - -struct vop_device * -vop_register_device(struct device *pdev, int id, - const struct dma_map_ops *dma_ops, - struct vop_hw_ops *hw_ops, u8 dnode, struct mic_mw *aper, - struct dma_chan *chan); -void vop_unregister_device(struct vop_device *dev); -int vop_register_driver(struct vop_driver *drv); -void vop_unregister_driver(struct vop_driver *drv); - -/* - * module_vop_driver() - Helper macro for drivers that don't do - * anything special in module init/exit. This eliminates a lot of - * boilerplate. Each module may only use this macro once, and - * calling it replaces module_init() and module_exit() - */ -#define module_vop_driver(__vop_driver) \ - module_driver(__vop_driver, vop_register_driver, \ - vop_unregister_driver) - -static inline struct vop_device *dev_to_vop(struct device *dev) -{ - return container_of(dev, struct vop_device, dev); -} - -static inline struct vop_driver *drv_to_vop(struct device_driver *drv) -{ - return container_of(drv, struct vop_driver, driver); -} -#endif /* _VOP_BUS_H */ diff --git a/drivers/misc/mic/card/Makefile b/drivers/misc/mic/card/Makefile deleted file mode 100644 index 921a7e7e0fbd..000000000000 --- a/drivers/misc/mic/card/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile - Intel MIC Linux driver. -# Copyright(c) 2013, Intel Corporation. -# -ccflags-y += -DINTEL_MIC_CARD - -obj-$(CONFIG_INTEL_MIC_CARD) += mic_card.o -mic_card-y += mic_x100.o -mic_card-y += mic_device.o -mic_card-y += mic_debugfs.o diff --git a/drivers/misc/mic/card/mic_debugfs.c b/drivers/misc/mic/card/mic_debugfs.c deleted file mode 100644 index 4c326e8f4d99..000000000000 --- a/drivers/misc/mic/card/mic_debugfs.c +++ /dev/null @@ -1,85 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Disclaimer: The codes contained in these modules may be specific to - * the Intel Software Development Platform codenamed: Knights Ferry, and - * the Intel product codenamed: Knights Corner, and are not backward - * compatible with other Intel products. Additionally, Intel will NOT - * support the codes or instruction set in future products. - * - * Intel MIC Card driver. - */ -#include <linux/debugfs.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/interrupt.h> -#include <linux/device.h> - -#include "../common/mic_dev.h" -#include "mic_device.h" - -/* Debugfs parent dir */ -static struct dentry *mic_dbg; - -/* - * mic_intr_show - Send interrupts to host. - */ -static int mic_intr_show(struct seq_file *s, void *unused) -{ - struct mic_driver *mdrv = s->private; - struct mic_device *mdev = &mdrv->mdev; - - mic_send_intr(mdev, 0); - msleep(1000); - mic_send_intr(mdev, 1); - msleep(1000); - mic_send_intr(mdev, 2); - msleep(1000); - mic_send_intr(mdev, 3); - msleep(1000); - - return 0; -} - -DEFINE_SHOW_ATTRIBUTE(mic_intr); - -/* - * mic_create_card_debug_dir - Initialize MIC debugfs entries. - */ -void __init mic_create_card_debug_dir(struct mic_driver *mdrv) -{ - if (!mic_dbg) - return; - - mdrv->dbg_dir = debugfs_create_dir(mdrv->name, mic_dbg); - - debugfs_create_file("intr_test", 0444, mdrv->dbg_dir, mdrv, - &mic_intr_fops); -} - -/* - * mic_delete_card_debug_dir - Uninitialize MIC debugfs entries. - */ -void mic_delete_card_debug_dir(struct mic_driver *mdrv) -{ - debugfs_remove_recursive(mdrv->dbg_dir); -} - -/* - * mic_init_card_debugfs - Initialize global debugfs entry. - */ -void __init mic_init_card_debugfs(void) -{ - mic_dbg = debugfs_create_dir(KBUILD_MODNAME, NULL); -} - -/* - * mic_exit_card_debugfs - Uninitialize global debugfs entry - */ -void mic_exit_card_debugfs(void) -{ - debugfs_remove(mic_dbg); -} diff --git a/drivers/misc/mic/card/mic_device.c b/drivers/misc/mic/card/mic_device.c deleted file mode 100644 index a15606259bdc..000000000000 --- a/drivers/misc/mic/card/mic_device.c +++ /dev/null @@ -1,417 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Disclaimer: The codes contained in these modules may be specific to - * the Intel Software Development Platform codenamed: Knights Ferry, and - * the Intel product codenamed: Knights Corner, and are not backward - * compatible with other Intel products. Additionally, Intel will NOT - * support the codes or instruction set in future products. - * - * Intel MIC Card driver. - */ -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/reboot.h> -#include <linux/dmaengine.h> -#include <linux/kmod.h> - -#include <linux/mic_common.h> -#include "../common/mic_dev.h" -#include "mic_device.h" - -static struct mic_driver *g_drv; - -static int __init mic_dp_init(void) -{ - struct mic_driver *mdrv = g_drv; - struct mic_device *mdev = &mdrv->mdev; - struct mic_bootparam __iomem *bootparam; - u64 lo, hi, dp_dma_addr; - u32 magic; - - lo = mic_read_spad(&mdrv->mdev, MIC_DPLO_SPAD); - hi = mic_read_spad(&mdrv->mdev, MIC_DPHI_SPAD); - - dp_dma_addr = lo | (hi << 32); - mdrv->dp = mic_card_map(mdev, dp_dma_addr, MIC_DP_SIZE); - if (!mdrv->dp) { - dev_err(mdrv->dev, "Cannot remap Aperture BAR\n"); - return -ENOMEM; - } - bootparam = mdrv->dp; - magic = ioread32(&bootparam->magic); - if (MIC_MAGIC != magic) { - dev_err(mdrv->dev, "bootparam magic mismatch 0x%x\n", magic); - return -EIO; - } - return 0; -} - -/* Uninitialize the device page */ -static void mic_dp_uninit(void) -{ - mic_card_unmap(&g_drv->mdev, g_drv->dp); -} - -/** - * mic_request_card_irq - request an irq. - * - * @handler: interrupt handler passed to request_threaded_irq. - * @thread_fn: thread fn. passed to request_threaded_irq. - * @name: The ASCII name of the callee requesting the irq. - * @data: private data that is returned back when calling the - * function handler. - * @index: The doorbell index of the requester. - * - * returns: The cookie that is transparent to the caller. Passed - * back when calling mic_free_irq. An appropriate error code - * is returned on failure. Caller needs to use IS_ERR(return_val) - * to check for failure and PTR_ERR(return_val) to obtained the - * error code. - * - */ -struct mic_irq * -mic_request_card_irq(irq_handler_t handler, - irq_handler_t thread_fn, const char *name, - void *data, int index) -{ - int rc = 0; - unsigned long cookie; - struct mic_driver *mdrv = g_drv; - - rc = request_threaded_irq(mic_db_to_irq(mdrv, index), handler, - thread_fn, 0, name, data); - if (rc) { - dev_err(mdrv->dev, "request_threaded_irq failed rc = %d\n", rc); - goto err; - } - mdrv->irq_info.irq_usage_count[index]++; - cookie = index; - return (struct mic_irq *)cookie; -err: - return ERR_PTR(rc); -} - -/** - * mic_free_card_irq - free irq. - * - * @cookie: cookie obtained during a successful call to mic_request_threaded_irq - * @data: private data specified by the calling function during the - * mic_request_threaded_irq - * - * returns: none. - */ -void mic_free_card_irq(struct mic_irq *cookie, void *data) -{ - int index; - struct mic_driver *mdrv = g_drv; - - index = (unsigned long)cookie & 0xFFFFU; - free_irq(mic_db_to_irq(mdrv, index), data); - mdrv->irq_info.irq_usage_count[index]--; -} - -/** - * mic_next_card_db - Get the doorbell with minimum usage count. - * - * Returns the irq index. - */ -int mic_next_card_db(void) -{ - int i; - int index = 0; - struct mic_driver *mdrv = g_drv; - - for (i = 0; i < mdrv->intr_info.num_intr; i++) { - if (mdrv->irq_info.irq_usage_count[i] < - mdrv->irq_info.irq_usage_count[index]) - index = i; - } - - return index; -} - -/** - * mic_init_irq - Initialize irq information. - * - * Returns 0 in success. Appropriate error code on failure. - */ -static int mic_init_irq(void) -{ - struct mic_driver *mdrv = g_drv; - - mdrv->irq_info.irq_usage_count = kzalloc((sizeof(u32) * - mdrv->intr_info.num_intr), - GFP_KERNEL); - if (!mdrv->irq_info.irq_usage_count) - return -ENOMEM; - return 0; -} - -/** - * mic_uninit_irq - Uninitialize irq information. - * - * None. - */ -static void mic_uninit_irq(void) -{ - struct mic_driver *mdrv = g_drv; - - kfree(mdrv->irq_info.irq_usage_count); -} - -static inline struct mic_driver *scdev_to_mdrv(struct scif_hw_dev *scdev) -{ - return dev_get_drvdata(scdev->dev.parent); -} - -static struct mic_irq * -___mic_request_irq(struct scif_hw_dev *scdev, - irqreturn_t (*func)(int irq, void *data), - const char *name, void *data, - int db) -{ - return mic_request_card_irq(func, NULL, name, data, db); -} - -static void -___mic_free_irq(struct scif_hw_dev *scdev, - struct mic_irq *cookie, void *data) -{ - return mic_free_card_irq(cookie, data); -} - -static void ___mic_ack_interrupt(struct scif_hw_dev *scdev, int num) -{ - struct mic_driver *mdrv = scdev_to_mdrv(scdev); - - mic_ack_interrupt(&mdrv->mdev); -} - -static int ___mic_next_db(struct scif_hw_dev *scdev) -{ - return mic_next_card_db(); -} - -static void ___mic_send_intr(struct scif_hw_dev *scdev, int db) -{ - struct mic_driver *mdrv = scdev_to_mdrv(scdev); - - mic_send_intr(&mdrv->mdev, db); -} - -static void ___mic_send_p2p_intr(struct scif_hw_dev *scdev, int db, - struct mic_mw *mw) -{ - mic_send_p2p_intr(db, mw); -} - -static void __iomem * -___mic_ioremap(struct scif_hw_dev *scdev, - phys_addr_t pa, size_t len) -{ - struct mic_driver *mdrv = scdev_to_mdrv(scdev); - - return mic_card_map(&mdrv->mdev, pa, len); -} - -static void ___mic_iounmap(struct scif_hw_dev *scdev, void __iomem *va) -{ - struct mic_driver *mdrv = scdev_to_mdrv(scdev); - - mic_card_unmap(&mdrv->mdev, va); -} - -static struct scif_hw_ops scif_hw_ops = { - .request_irq = ___mic_request_irq, - .free_irq = ___mic_free_irq, - .ack_interrupt = ___mic_ack_interrupt, - .next_db = ___mic_next_db, - .send_intr = ___mic_send_intr, - .send_p2p_intr = ___mic_send_p2p_intr, - .remap = ___mic_ioremap, - .unmap = ___mic_iounmap, -}; - -static inline struct mic_driver *vpdev_to_mdrv(struct vop_device *vpdev) -{ - return dev_get_drvdata(vpdev->dev.parent); -} - -static struct mic_irq * -__mic_request_irq(struct vop_device *vpdev, - irqreturn_t (*func)(int irq, void *data), - const char *name, void *data, int intr_src) -{ - return mic_request_card_irq(func, NULL, name, data, intr_src); -} - -static void __mic_free_irq(struct vop_device *vpdev, - struct mic_irq *cookie, void *data) -{ - return mic_free_card_irq(cookie, data); -} - -static void __mic_ack_interrupt(struct vop_device *vpdev, int num) -{ - struct mic_driver *mdrv = vpdev_to_mdrv(vpdev); - - mic_ack_interrupt(&mdrv->mdev); -} - -static int __mic_next_db(struct vop_device *vpdev) -{ - return mic_next_card_db(); -} - -static void __iomem *__mic_get_remote_dp(struct vop_device *vpdev) -{ - struct mic_driver *mdrv = vpdev_to_mdrv(vpdev); - - return mdrv->dp; -} - -static void __mic_send_intr(struct vop_device *vpdev, int db) -{ - struct mic_driver *mdrv = vpdev_to_mdrv(vpdev); - - mic_send_intr(&mdrv->mdev, db); -} - -static void __iomem *__mic_ioremap(struct vop_device *vpdev, - dma_addr_t pa, size_t len) -{ - struct mic_driver *mdrv = vpdev_to_mdrv(vpdev); - - return mic_card_map(&mdrv->mdev, pa, len); -} - -static void __mic_iounmap(struct vop_device *vpdev, void __iomem *va) -{ - struct mic_driver *mdrv = vpdev_to_mdrv(vpdev); - - mic_card_unmap(&mdrv->mdev, va); -} - -static struct vop_hw_ops vop_hw_ops = { - .request_irq = __mic_request_irq, - .free_irq = __mic_free_irq, - .ack_interrupt = __mic_ack_interrupt, - .next_db = __mic_next_db, - .get_remote_dp = __mic_get_remote_dp, - .send_intr = __mic_send_intr, - .remap = __mic_ioremap, - .unmap = __mic_iounmap, -}; - -static int mic_request_dma_chans(struct mic_driver *mdrv) -{ - dma_cap_mask_t mask; - struct dma_chan *chan; - - dma_cap_zero(mask); - dma_cap_set(DMA_MEMCPY, mask); - - do { - chan = dma_request_channel(mask, NULL, NULL); - if (chan) { - mdrv->dma_ch[mdrv->num_dma_ch++] = chan; - if (mdrv->num_dma_ch >= MIC_MAX_DMA_CHAN) - break; - } - } while (chan); - dev_info(mdrv->dev, "DMA channels # %d\n", mdrv->num_dma_ch); - return mdrv->num_dma_ch; -} - -static void mic_free_dma_chans(struct mic_driver *mdrv) -{ - int i = 0; - - for (i = 0; i < mdrv->num_dma_ch; i++) { - dma_release_channel(mdrv->dma_ch[i]); - mdrv->dma_ch[i] = NULL; - } - mdrv->num_dma_ch = 0; -} - -/* - * mic_driver_init - MIC driver initialization tasks. - * - * Returns 0 in success. Appropriate error code on failure. - */ -int __init mic_driver_init(struct mic_driver *mdrv) -{ - int rc; - struct mic_bootparam __iomem *bootparam; - u8 node_id; - - g_drv = mdrv; - /* Unloading the card module is not supported. */ - if (!try_module_get(mdrv->dev->driver->owner)) { - rc = -ENODEV; - goto done; - } - rc = mic_dp_init(); - if (rc) - goto put; - rc = mic_init_irq(); - if (rc) - goto dp_uninit; - if (!mic_request_dma_chans(mdrv)) { - rc = -ENODEV; - goto irq_uninit; - } - mdrv->vpdev = vop_register_device(mdrv->dev, VOP_DEV_TRNSP, - NULL, &vop_hw_ops, 0, - NULL, mdrv->dma_ch[0]); - if (IS_ERR(mdrv->vpdev)) { - rc = PTR_ERR(mdrv->vpdev); - goto dma_free; - } - bootparam = mdrv->dp; - node_id = ioread8(&bootparam->node_id); - mdrv->scdev = scif_register_device(mdrv->dev, MIC_SCIF_DEV, - NULL, &scif_hw_ops, - 0, node_id, &mdrv->mdev.mmio, NULL, - NULL, mdrv->dp, mdrv->dma_ch, - mdrv->num_dma_ch, true); - if (IS_ERR(mdrv->scdev)) { - rc = PTR_ERR(mdrv->scdev); - goto vop_remove; - } - mic_create_card_debug_dir(mdrv); -done: - return rc; -vop_remove: - vop_unregister_device(mdrv->vpdev); -dma_free: - mic_free_dma_chans(mdrv); -irq_uninit: - mic_uninit_irq(); -dp_uninit: - mic_dp_uninit(); -put: - module_put(mdrv->dev->driver->owner); - return rc; -} - -/* - * mic_driver_uninit - MIC driver uninitialization tasks. - * - * Returns None - */ -void mic_driver_uninit(struct mic_driver *mdrv) -{ - mic_delete_card_debug_dir(mdrv); - scif_unregister_device(mdrv->scdev); - vop_unregister_device(mdrv->vpdev); - mic_free_dma_chans(mdrv); - mic_uninit_irq(); - mic_dp_uninit(); - module_put(mdrv->dev->driver->owner); -} diff --git a/drivers/misc/mic/card/mic_device.h b/drivers/misc/mic/card/mic_device.h deleted file mode 100644 index d6cc69a235a3..000000000000 --- a/drivers/misc/mic/card/mic_device.h +++ /dev/null @@ -1,137 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Disclaimer: The codes contained in these modules may be specific to - * the Intel Software Development Platform codenamed: Knights Ferry, and - * the Intel product codenamed: Knights Corner, and are not backward - * compatible with other Intel products. Additionally, Intel will NOT - * support the codes or instruction set in future products. - * - * Intel MIC Card driver. - */ -#ifndef _MIC_CARD_DEVICE_H_ -#define _MIC_CARD_DEVICE_H_ - -#include <linux/workqueue.h> -#include <linux/io.h> -#include <linux/interrupt.h> -#include <linux/mic_bus.h> -#include "../bus/scif_bus.h" -#include "../bus/vop_bus.h" - -/** - * struct mic_intr_info - Contains h/w specific interrupt sources info - * - * @num_intr: The number of irqs available - */ -struct mic_intr_info { - u32 num_intr; -}; - -/** - * struct mic_irq_info - OS specific irq information - * - * @irq_usage_count: usage count array tracking the number of sources - * assigned for each irq. - */ -struct mic_irq_info { - int *irq_usage_count; -}; - -/** - * struct mic_device - MIC device information. - * - * @mmio: MMIO bar information. - */ -struct mic_device { - struct mic_mw mmio; -}; - -/** - * struct mic_driver - MIC card driver information. - * - * @name: Name for MIC driver. - * @dbg_dir: debugfs directory of this MIC device. - * @dev: The device backing this MIC. - * @dp: The pointer to the virtio device page. - * @mdev: MIC device information for the host. - * @hotplug_work: Hot plug work for adding/removing virtio devices. - * @irq_info: The OS specific irq information - * @intr_info: H/W specific interrupt information. - * @dma_mbdev: dma device on the MIC virtual bus. - * @dma_ch - Array of DMA channels - * @num_dma_ch - Number of DMA channels available - * @scdev: SCIF device on the SCIF virtual bus. - * @vpdev: Virtio over PCIe device on the VOP virtual bus. - */ -struct mic_driver { - char name[20]; - struct dentry *dbg_dir; - struct device *dev; - void __iomem *dp; - struct mic_device mdev; - struct work_struct hotplug_work; - struct mic_irq_info irq_info; - struct mic_intr_info intr_info; - struct mbus_device *dma_mbdev; - struct dma_chan *dma_ch[MIC_MAX_DMA_CHAN]; - int num_dma_ch; - struct scif_hw_dev *scdev; - struct vop_device *vpdev; -}; - -/** - * struct mic_irq - opaque pointer used as cookie - */ -struct mic_irq; - -/** - * mic_mmio_read - read from an MMIO register. - * @mw: MMIO register base virtual address. - * @offset: register offset. - * - * RETURNS: register value. - */ -static inline u32 mic_mmio_read(struct mic_mw *mw, u32 offset) -{ - return ioread32(mw->va + offset); -} - -/** - * mic_mmio_write - write to an MMIO register. - * @mw: MMIO register base virtual address. - * @val: the data value to put into the register - * @offset: register offset. - * - * RETURNS: none. - */ -static inline void -mic_mmio_write(struct mic_mw *mw, u32 val, u32 offset) -{ - iowrite32(val, mw->va + offset); -} - -int mic_driver_init(struct mic_driver *mdrv); -void mic_driver_uninit(struct mic_driver *mdrv); -int mic_next_card_db(void); -struct mic_irq * -mic_request_card_irq(irq_handler_t handler, irq_handler_t thread_fn, - const char *name, void *data, int db); -void mic_free_card_irq(struct mic_irq *cookie, void *data); -u32 mic_read_spad(struct mic_device *mdev, unsigned int idx); -void mic_send_intr(struct mic_device *mdev, int doorbell); -void mic_send_p2p_intr(int doorbell, struct mic_mw *mw); -int mic_db_to_irq(struct mic_driver *mdrv, int db); -u32 mic_ack_interrupt(struct mic_device *mdev); -void mic_hw_intr_init(struct mic_driver *mdrv); -void __iomem * -mic_card_map(struct mic_device *mdev, dma_addr_t addr, size_t size); -void mic_card_unmap(struct mic_device *mdev, void __iomem *addr); -void __init mic_create_card_debug_dir(struct mic_driver *mdrv); -void mic_delete_card_debug_dir(struct mic_driver *mdrv); -void __init mic_init_card_debugfs(void); -void mic_exit_card_debugfs(void); -#endif diff --git a/drivers/misc/mic/card/mic_x100.c b/drivers/misc/mic/card/mic_x100.c deleted file mode 100644 index c8bff2916d3d..000000000000 --- a/drivers/misc/mic/card/mic_x100.c +++ /dev/null @@ -1,347 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Disclaimer: The codes contained in these modules may be specific to - * the Intel Software Development Platform codenamed: Knights Ferry, and - * the Intel product codenamed: Knights Corner, and are not backward - * compatible with other Intel products. Additionally, Intel will NOT - * support the codes or instruction set in future products. - * - * Intel MIC Card driver. - */ -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/platform_device.h> - -#include "../common/mic_dev.h" -#include "mic_device.h" -#include "mic_x100.h" - -static const char mic_driver_name[] = "mic"; - -static struct mic_driver g_drv; - -/** - * mic_read_spad - read from the scratchpad register - * @mdev: pointer to mic_device instance - * @idx: index to scratchpad register, 0 based - * - * This function allows reading of the 32bit scratchpad register. - * - * RETURNS: An appropriate -ERRNO error value on error, or zero for success. - */ -u32 mic_read_spad(struct mic_device *mdev, unsigned int idx) -{ - return mic_mmio_read(&mdev->mmio, - MIC_X100_SBOX_BASE_ADDRESS + - MIC_X100_SBOX_SPAD0 + idx * 4); -} - -/** - * __mic_send_intr - Send interrupt to Host. - * @mdev: pointer to mic_device instance - * @doorbell: Doorbell number. - */ -void mic_send_intr(struct mic_device *mdev, int doorbell) -{ - struct mic_mw *mw = &mdev->mmio; - - if (doorbell > MIC_X100_MAX_DOORBELL_IDX) - return; - /* Ensure that the interrupt is ordered w.r.t previous stores. */ - wmb(); - mic_mmio_write(mw, MIC_X100_SBOX_SDBIC0_DBREQ_BIT, - MIC_X100_SBOX_BASE_ADDRESS + - (MIC_X100_SBOX_SDBIC0 + (4 * doorbell))); -} - -/* - * mic_x100_send_sbox_intr - Send an MIC_X100_SBOX interrupt to MIC. - */ -static void mic_x100_send_sbox_intr(struct mic_mw *mw, int doorbell) -{ - u64 apic_icr_offset = MIC_X100_SBOX_APICICR0 + doorbell * 8; - u32 apicicr_low = mic_mmio_read(mw, MIC_X100_SBOX_BASE_ADDRESS + - apic_icr_offset); - - /* for MIC we need to make sure we "hit" the send_icr bit (13) */ - apicicr_low = (apicicr_low | (1 << 13)); - /* - * Ensure that the interrupt is ordered w.r.t. previous stores - * to main memory. Fence instructions are not implemented in X100 - * since execution is in order but a compiler barrier is still - * required. - */ - wmb(); - mic_mmio_write(mw, apicicr_low, - MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset); -} - -static void mic_x100_send_rdmasr_intr(struct mic_mw *mw, int doorbell) -{ - int rdmasr_offset = MIC_X100_SBOX_RDMASR0 + (doorbell << 2); - /* - * Ensure that the interrupt is ordered w.r.t. previous stores - * to main memory. Fence instructions are not implemented in X100 - * since execution is in order but a compiler barrier is still - * required. - */ - wmb(); - mic_mmio_write(mw, 0, MIC_X100_SBOX_BASE_ADDRESS + rdmasr_offset); -} - -/** - * mic_ack_interrupt - Device specific interrupt handling. - * @mdev: pointer to mic_device instance - * - * Returns: bitmask of doorbell events triggered. - */ -u32 mic_ack_interrupt(struct mic_device *mdev) -{ - return 0; -} - -static inline int mic_get_sbox_irq(int db) -{ - return MIC_X100_IRQ_BASE + db; -} - -static inline int mic_get_rdmasr_irq(int index) -{ - return MIC_X100_RDMASR_IRQ_BASE + index; -} - -void mic_send_p2p_intr(int db, struct mic_mw *mw) -{ - int rdmasr_index; - - if (db < MIC_X100_NUM_SBOX_IRQ) { - mic_x100_send_sbox_intr(mw, db); - } else { - rdmasr_index = db - MIC_X100_NUM_SBOX_IRQ; - mic_x100_send_rdmasr_intr(mw, rdmasr_index); - } -} - -/** - * mic_hw_intr_init - Initialize h/w specific interrupt - * information. - * @mdrv: pointer to mic_driver - */ -void mic_hw_intr_init(struct mic_driver *mdrv) -{ - mdrv->intr_info.num_intr = MIC_X100_NUM_SBOX_IRQ + - MIC_X100_NUM_RDMASR_IRQ; -} - -/** - * mic_db_to_irq - Retrieve irq number corresponding to a doorbell. - * @mdrv: pointer to mic_driver - * @db: The doorbell obtained for which the irq is needed. Doorbell - * may correspond to an sbox doorbell or an rdmasr index. - * - * Returns the irq corresponding to the doorbell. - */ -int mic_db_to_irq(struct mic_driver *mdrv, int db) -{ - int rdmasr_index; - - /* - * The total number of doorbell interrupts on the card are 16. Indices - * 0-8 falls in the SBOX category and 8-15 fall in the RDMASR category. - */ - if (db < MIC_X100_NUM_SBOX_IRQ) { - return mic_get_sbox_irq(db); - } else { - rdmasr_index = db - MIC_X100_NUM_SBOX_IRQ; - return mic_get_rdmasr_irq(rdmasr_index); - } -} - -/* - * mic_card_map - Allocate virtual address for a remote memory region. - * @mdev: pointer to mic_device instance. - * @addr: Remote DMA address. - * @size: Size of the region. - * - * Returns: Virtual address backing the remote memory region. - */ -void __iomem * -mic_card_map(struct mic_device *mdev, dma_addr_t addr, size_t size) -{ - return ioremap(addr, size); -} - -/* - * mic_card_unmap - Unmap the virtual address for a remote memory region. - * @mdev: pointer to mic_device instance. - * @addr: Virtual address for remote memory region. - * - * Returns: None. - */ -void mic_card_unmap(struct mic_device *mdev, void __iomem *addr) -{ - iounmap(addr); -} - -static inline struct mic_driver *mbdev_to_mdrv(struct mbus_device *mbdev) -{ - return dev_get_drvdata(mbdev->dev.parent); -} - -static struct mic_irq * -_mic_request_threaded_irq(struct mbus_device *mbdev, - irq_handler_t handler, irq_handler_t thread_fn, - const char *name, void *data, int intr_src) -{ - int rc = 0; - unsigned int irq = intr_src; - unsigned long cookie = irq; - - rc = request_threaded_irq(irq, handler, thread_fn, 0, name, data); - if (rc) { - dev_err(mbdev_to_mdrv(mbdev)->dev, - "request_threaded_irq failed rc = %d\n", rc); - return ERR_PTR(rc); - } - return (struct mic_irq *)cookie; -} - -static void _mic_free_irq(struct mbus_device *mbdev, - struct mic_irq *cookie, void *data) -{ - unsigned long irq = (unsigned long)cookie; - free_irq(irq, data); -} - -static void _mic_ack_interrupt(struct mbus_device *mbdev, int num) -{ - mic_ack_interrupt(&mbdev_to_mdrv(mbdev)->mdev); -} - -static struct mbus_hw_ops mbus_hw_ops = { - .request_threaded_irq = _mic_request_threaded_irq, - .free_irq = _mic_free_irq, - .ack_interrupt = _mic_ack_interrupt, -}; - -static int __init mic_probe(struct platform_device *pdev) -{ - struct mic_driver *mdrv = &g_drv; - struct mic_device *mdev = &mdrv->mdev; - int rc = 0; - - mdrv->dev = &pdev->dev; - snprintf(mdrv->name, sizeof(mic_driver_name), mic_driver_name); - - /* FIXME: use dma_set_mask_and_coherent() and check result */ - dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); - - mdev->mmio.pa = MIC_X100_MMIO_BASE; - mdev->mmio.len = MIC_X100_MMIO_LEN; - mdev->mmio.va = devm_ioremap(&pdev->dev, MIC_X100_MMIO_BASE, - MIC_X100_MMIO_LEN); - if (!mdev->mmio.va) { - dev_err(&pdev->dev, "Cannot remap MMIO BAR\n"); - rc = -EIO; - goto done; - } - mic_hw_intr_init(mdrv); - platform_set_drvdata(pdev, mdrv); - mdrv->dma_mbdev = mbus_register_device(mdrv->dev, MBUS_DEV_DMA_MIC, - NULL, &mbus_hw_ops, 0, - mdrv->mdev.mmio.va); - if (IS_ERR(mdrv->dma_mbdev)) { - rc = PTR_ERR(mdrv->dma_mbdev); - dev_err(&pdev->dev, "mbus_add_device failed rc %d\n", rc); - goto done; - } - rc = mic_driver_init(mdrv); - if (rc) { - dev_err(&pdev->dev, "mic_driver_init failed rc %d\n", rc); - goto remove_dma; - } -done: - return rc; -remove_dma: - mbus_unregister_device(mdrv->dma_mbdev); - return rc; -} - -static int mic_remove(struct platform_device *pdev) -{ - struct mic_driver *mdrv = &g_drv; - - mic_driver_uninit(mdrv); - mbus_unregister_device(mdrv->dma_mbdev); - return 0; -} - -static void mic_platform_shutdown(struct platform_device *pdev) -{ - mic_remove(pdev); -} - -static struct platform_driver __refdata mic_platform_driver = { - .probe = mic_probe, - .remove = mic_remove, - .shutdown = mic_platform_shutdown, - .driver = { - .name = mic_driver_name, - }, -}; - -static struct platform_device *mic_platform_dev; - -static int __init mic_init(void) -{ - int ret; - struct cpuinfo_x86 *c = &cpu_data(0); - - if (!(c->x86 == 11 && c->x86_model == 1)) { - ret = -ENODEV; - pr_err("%s not running on X100 ret %d\n", __func__, ret); - goto done; - } - - request_module("mic_x100_dma"); - mic_init_card_debugfs(); - - mic_platform_dev = platform_device_register_simple(mic_driver_name, - 0, NULL, 0); - ret = PTR_ERR_OR_ZERO(mic_platform_dev); - if (ret) { - pr_err("platform_device_register_full ret %d\n", ret); - goto cleanup_debugfs; - } - ret = platform_driver_register(&mic_platform_driver); - if (ret) { - pr_err("platform_driver_register ret %d\n", ret); - goto device_unregister; - } - return ret; - -device_unregister: - platform_device_unregister(mic_platform_dev); -cleanup_debugfs: - mic_exit_card_debugfs(); -done: - return ret; -} - -static void __exit mic_exit(void) -{ - platform_driver_unregister(&mic_platform_driver); - platform_device_unregister(mic_platform_dev); - mic_exit_card_debugfs(); -} - -module_init(mic_init); -module_exit(mic_exit); - -MODULE_AUTHOR("Intel Corporation"); -MODULE_DESCRIPTION("Intel(R) MIC X100 Card driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/mic/card/mic_x100.h b/drivers/misc/mic/card/mic_x100.h deleted file mode 100644 index 46644dde0c07..000000000000 --- a/drivers/misc/mic/card/mic_x100.h +++ /dev/null @@ -1,37 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Disclaimer: The codes contained in these modules may be specific to - * the Intel Software Development Platform codenamed: Knights Ferry, and - * the Intel product codenamed: Knights Corner, and are not backward - * compatible with other Intel products. Additionally, Intel will NOT - * support the codes or instruction set in future products. - * - * Intel MIC Card driver. - */ -#ifndef _MIC_X100_CARD_H_ -#define _MIC_X100_CARD_H_ - -#define MIC_X100_MMIO_BASE 0x08007C0000ULL -#define MIC_X100_MMIO_LEN 0x00020000ULL -#define MIC_X100_SBOX_BASE_ADDRESS 0x00010000ULL - -#define MIC_X100_SBOX_SPAD0 0x0000AB20 -#define MIC_X100_SBOX_SDBIC0 0x0000CC90 -#define MIC_X100_SBOX_SDBIC0_DBREQ_BIT 0x80000000 -#define MIC_X100_SBOX_RDMASR0 0x0000B180 -#define MIC_X100_SBOX_APICICR0 0x0000A9D0 - -#define MIC_X100_MAX_DOORBELL_IDX 8 - -#define MIC_X100_NUM_SBOX_IRQ 8 -#define MIC_X100_NUM_RDMASR_IRQ 8 -#define MIC_X100_SBOX_IRQ_BASE 0 -#define MIC_X100_RDMASR_IRQ_BASE 17 - -#define MIC_X100_IRQ_BASE 26 - -#endif diff --git a/drivers/misc/mic/common/mic_dev.h b/drivers/misc/mic/common/mic_dev.h deleted file mode 100644 index f94f08df0260..000000000000 --- a/drivers/misc/mic/common/mic_dev.h +++ /dev/null @@ -1,55 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Intel MIC driver. - */ -#ifndef __MIC_DEV_H__ -#define __MIC_DEV_H__ - -/* The maximum number of MIC devices supported in a single host system. */ -#define MIC_MAX_NUM_DEVS 128 - -/** - * enum mic_hw_family - The hardware family to which a device belongs. - */ -enum mic_hw_family { - MIC_FAMILY_X100 = 0, - MIC_FAMILY_X200, - MIC_FAMILY_UNKNOWN, - MIC_FAMILY_LAST -}; - -/** - * struct mic_mw - MIC memory window - * - * @pa: Base physical address. - * @va: Base ioremap'd virtual address. - * @len: Size of the memory window. - */ -struct mic_mw { - phys_addr_t pa; - void __iomem *va; - resource_size_t len; -}; - -/* - * Scratch pad register offsets used by the host to communicate - * device page DMA address to the card. - */ -#define MIC_DPLO_SPAD 14 -#define MIC_DPHI_SPAD 15 - -/* - * These values are supposed to be in the config_change field of the - * device page when the host sends a config change interrupt to the card. - */ -#define MIC_VIRTIO_PARAM_DEV_REMOVE 0x1 -#define MIC_VIRTIO_PARAM_CONFIG_CHANGED 0x2 - -/* Maximum number of DMA channels */ -#define MIC_MAX_DMA_CHAN 4 - -#endif diff --git a/drivers/misc/mic/cosm/Makefile b/drivers/misc/mic/cosm/Makefile deleted file mode 100644 index 97d74cb12030..000000000000 --- a/drivers/misc/mic/cosm/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile - Intel MIC Coprocessor State Management (COSM) Driver -# Copyright(c) 2015, Intel Corporation. -# -obj-$(CONFIG_MIC_COSM) += mic_cosm.o - -mic_cosm-objs := cosm_main.o -mic_cosm-objs += cosm_debugfs.o -mic_cosm-objs += cosm_sysfs.o -mic_cosm-objs += cosm_scif_server.o diff --git a/drivers/misc/mic/cosm/cosm_debugfs.c b/drivers/misc/mic/cosm/cosm_debugfs.c deleted file mode 100644 index cb55653cf1f9..000000000000 --- a/drivers/misc/mic/cosm/cosm_debugfs.c +++ /dev/null @@ -1,116 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2015 Intel Corporation. - * - * Intel MIC Coprocessor State Management (COSM) Driver - */ - -#include <linux/debugfs.h> -#include <linux/slab.h> -#include <linux/io.h> -#include "cosm_main.h" - -/* Debugfs parent dir */ -static struct dentry *cosm_dbg; - -/* - * log_buf_show - Display MIC kernel log buffer - * - * log_buf addr/len is read from System.map by user space - * and populated in sysfs entries. - */ -static int log_buf_show(struct seq_file *s, void *unused) -{ - void __iomem *log_buf_va; - int __iomem *log_buf_len_va; - struct cosm_device *cdev = s->private; - void *kva; - int size; - u64 aper_offset; - - if (!cdev || !cdev->log_buf_addr || !cdev->log_buf_len) - goto done; - - mutex_lock(&cdev->cosm_mutex); - switch (cdev->state) { - case MIC_BOOTING: - case MIC_ONLINE: - case MIC_SHUTTING_DOWN: - break; - default: - goto unlock; - } - - /* - * Card kernel will never be relocated and any kernel text/data mapping - * can be translated to phys address by subtracting __START_KERNEL_map. - */ - aper_offset = (u64)cdev->log_buf_len - __START_KERNEL_map; - log_buf_len_va = cdev->hw_ops->aper(cdev)->va + aper_offset; - aper_offset = (u64)cdev->log_buf_addr - __START_KERNEL_map; - log_buf_va = cdev->hw_ops->aper(cdev)->va + aper_offset; - - size = ioread32(log_buf_len_va); - kva = kmalloc(size, GFP_KERNEL); - if (!kva) - goto unlock; - - memcpy_fromio(kva, log_buf_va, size); - seq_write(s, kva, size); - kfree(kva); -unlock: - mutex_unlock(&cdev->cosm_mutex); -done: - return 0; -} - -DEFINE_SHOW_ATTRIBUTE(log_buf); - -/* - * force_reset_show - Force MIC reset - * - * Invokes the force_reset COSM bus op instead of the standard reset - * op in case a force reset of the MIC device is required - */ -static int force_reset_show(struct seq_file *s, void *pos) -{ - struct cosm_device *cdev = s->private; - - cosm_stop(cdev, true); - return 0; -} - -DEFINE_SHOW_ATTRIBUTE(force_reset); - -void cosm_create_debug_dir(struct cosm_device *cdev) -{ - char name[16]; - - if (!cosm_dbg) - return; - - scnprintf(name, sizeof(name), "mic%d", cdev->index); - cdev->dbg_dir = debugfs_create_dir(name, cosm_dbg); - - debugfs_create_file("log_buf", 0444, cdev->dbg_dir, cdev, - &log_buf_fops); - debugfs_create_file("force_reset", 0444, cdev->dbg_dir, cdev, - &force_reset_fops); -} - -void cosm_delete_debug_dir(struct cosm_device *cdev) -{ - debugfs_remove_recursive(cdev->dbg_dir); -} - -void cosm_init_debugfs(void) -{ - cosm_dbg = debugfs_create_dir(KBUILD_MODNAME, NULL); -} - -void cosm_exit_debugfs(void) -{ - debugfs_remove(cosm_dbg); -} diff --git a/drivers/misc/mic/cosm/cosm_main.c b/drivers/misc/mic/cosm/cosm_main.c deleted file mode 100644 index ebb0eac43754..000000000000 --- a/drivers/misc/mic/cosm/cosm_main.c +++ /dev/null @@ -1,382 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2015 Intel Corporation. - * - * Intel MIC Coprocessor State Management (COSM) Driver - */ - -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/idr.h> -#include <linux/slab.h> -#include <linux/cred.h> -#include "cosm_main.h" - -static const char cosm_driver_name[] = "mic"; - -/* COSM ID allocator */ -static struct ida g_cosm_ida; -/* Class of MIC devices for sysfs accessibility. */ -static struct class *g_cosm_class; -/* Number of MIC devices */ -static atomic_t g_num_dev; - -/** - * cosm_hw_reset - Issue a HW reset for the MIC device - * @cdev: pointer to cosm_device instance - * @force: force a MIC to reset even if it is already reset and ready - */ -static void cosm_hw_reset(struct cosm_device *cdev, bool force) -{ - int i; - -#define MIC_RESET_TO (45) - if (force && cdev->hw_ops->force_reset) - cdev->hw_ops->force_reset(cdev); - else - cdev->hw_ops->reset(cdev); - - for (i = 0; i < MIC_RESET_TO; i++) { - if (cdev->hw_ops->ready(cdev)) { - cosm_set_state(cdev, MIC_READY); - return; - } - /* - * Resets typically take 10s of seconds to complete. - * Since an MMIO read is required to check if the - * firmware is ready or not, a 1 second delay works nicely. - */ - msleep(1000); - } - cosm_set_state(cdev, MIC_RESET_FAILED); -} - -/** - * cosm_start - Start the MIC - * @cdev: pointer to cosm_device instance - * - * This function prepares an MIC for boot and initiates boot. - * RETURNS: An appropriate -ERRNO error value on error, or 0 for success. - */ -int cosm_start(struct cosm_device *cdev) -{ - const struct cred *orig_cred; - struct cred *override_cred; - int rc; - - mutex_lock(&cdev->cosm_mutex); - if (!cdev->bootmode) { - dev_err(&cdev->dev, "%s %d bootmode not set\n", - __func__, __LINE__); - rc = -EINVAL; - goto unlock_ret; - } -retry: - if (cdev->state != MIC_READY) { - dev_err(&cdev->dev, "%s %d MIC state not READY\n", - __func__, __LINE__); - rc = -EINVAL; - goto unlock_ret; - } - if (!cdev->hw_ops->ready(cdev)) { - cosm_hw_reset(cdev, false); - /* - * The state will either be MIC_READY if the reset succeeded - * or MIC_RESET_FAILED if the firmware reset failed. - */ - goto retry; - } - - /* - * Set credentials to root to allow non-root user to download initramsfs - * with 600 permissions - */ - override_cred = prepare_creds(); - if (!override_cred) { - dev_err(&cdev->dev, "%s %d prepare_creds failed\n", - __func__, __LINE__); - rc = -ENOMEM; - goto unlock_ret; - } - override_cred->fsuid = GLOBAL_ROOT_UID; - orig_cred = override_creds(override_cred); - - rc = cdev->hw_ops->start(cdev, cdev->index); - - revert_creds(orig_cred); - put_cred(override_cred); - if (rc) - goto unlock_ret; - - /* - * If linux is being booted, card is treated 'online' only - * when the scif interface in the card is up. If anything else - * is booted, we set card to 'online' immediately. - */ - if (!strcmp(cdev->bootmode, "linux")) - cosm_set_state(cdev, MIC_BOOTING); - else - cosm_set_state(cdev, MIC_ONLINE); -unlock_ret: - mutex_unlock(&cdev->cosm_mutex); - if (rc) - dev_err(&cdev->dev, "cosm_start failed rc %d\n", rc); - return rc; -} - -/** - * cosm_stop - Prepare the MIC for reset and trigger reset - * @cdev: pointer to cosm_device instance - * @force: force a MIC to reset even if it is already reset and ready. - * - * RETURNS: None - */ -void cosm_stop(struct cosm_device *cdev, bool force) -{ - mutex_lock(&cdev->cosm_mutex); - if (cdev->state != MIC_READY || force) { - /* - * Don't call hw_ops if they have been called previously. - * stop(..) calls device_unregister and will crash the system if - * called multiple times. - */ - u8 state = cdev->state == MIC_RESETTING ? - cdev->prev_state : cdev->state; - bool call_hw_ops = state != MIC_RESET_FAILED && - state != MIC_READY; - - if (cdev->state != MIC_RESETTING) - cosm_set_state(cdev, MIC_RESETTING); - cdev->heartbeat_watchdog_enable = false; - if (call_hw_ops) - cdev->hw_ops->stop(cdev, force); - cosm_hw_reset(cdev, force); - cosm_set_shutdown_status(cdev, MIC_NOP); - if (call_hw_ops && cdev->hw_ops->post_reset) - cdev->hw_ops->post_reset(cdev, cdev->state); - } - mutex_unlock(&cdev->cosm_mutex); - flush_work(&cdev->scif_work); -} - -/** - * cosm_reset_trigger_work - Trigger MIC reset - * @work: The work structure - * - * This work is scheduled whenever the host wants to reset the MIC. - */ -static void cosm_reset_trigger_work(struct work_struct *work) -{ - struct cosm_device *cdev = container_of(work, struct cosm_device, - reset_trigger_work); - cosm_stop(cdev, false); -} - -/** - * cosm_reset - Schedule MIC reset - * @cdev: pointer to cosm_device instance - * - * RETURNS: An -EINVAL if the card is already READY or 0 for success. - */ -int cosm_reset(struct cosm_device *cdev) -{ - int rc = 0; - - mutex_lock(&cdev->cosm_mutex); - if (cdev->state != MIC_READY) { - if (cdev->state != MIC_RESETTING) { - cdev->prev_state = cdev->state; - cosm_set_state(cdev, MIC_RESETTING); - schedule_work(&cdev->reset_trigger_work); - } - } else { - dev_err(&cdev->dev, "%s %d MIC is READY\n", __func__, __LINE__); - rc = -EINVAL; - } - mutex_unlock(&cdev->cosm_mutex); - return rc; -} - -/** - * cosm_shutdown - Initiate MIC shutdown. - * @cdev: pointer to cosm_device instance - * - * RETURNS: None - */ -int cosm_shutdown(struct cosm_device *cdev) -{ - struct cosm_msg msg = { .id = COSM_MSG_SHUTDOWN }; - int rc = 0; - - mutex_lock(&cdev->cosm_mutex); - if (cdev->state != MIC_ONLINE) { - rc = -EINVAL; - dev_err(&cdev->dev, "%s %d skipping shutdown in state: %s\n", - __func__, __LINE__, cosm_state_string[cdev->state]); - goto err; - } - - if (!cdev->epd) { - rc = -ENOTCONN; - dev_err(&cdev->dev, "%s %d scif endpoint not connected rc %d\n", - __func__, __LINE__, rc); - goto err; - } - - rc = scif_send(cdev->epd, &msg, sizeof(msg), SCIF_SEND_BLOCK); - if (rc < 0) { - dev_err(&cdev->dev, "%s %d scif_send failed rc %d\n", - __func__, __LINE__, rc); - goto err; - } - cdev->heartbeat_watchdog_enable = false; - cosm_set_state(cdev, MIC_SHUTTING_DOWN); - rc = 0; -err: - mutex_unlock(&cdev->cosm_mutex); - return rc; -} - -static int cosm_driver_probe(struct cosm_device *cdev) -{ - int rc; - - /* Initialize SCIF server at first probe */ - if (atomic_add_return(1, &g_num_dev) == 1) { - rc = cosm_scif_init(); - if (rc) - goto scif_exit; - } - mutex_init(&cdev->cosm_mutex); - INIT_WORK(&cdev->reset_trigger_work, cosm_reset_trigger_work); - INIT_WORK(&cdev->scif_work, cosm_scif_work); - cdev->sysfs_heartbeat_enable = true; - cosm_sysfs_init(cdev); - cdev->sdev = device_create_with_groups(g_cosm_class, cdev->dev.parent, - MKDEV(0, cdev->index), cdev, cdev->attr_group, - "mic%d", cdev->index); - if (IS_ERR(cdev->sdev)) { - rc = PTR_ERR(cdev->sdev); - dev_err(&cdev->dev, "device_create_with_groups failed rc %d\n", - rc); - goto scif_exit; - } - - cdev->state_sysfs = sysfs_get_dirent(cdev->sdev->kobj.sd, - "state"); - if (!cdev->state_sysfs) { - rc = -ENODEV; - dev_err(&cdev->dev, "sysfs_get_dirent failed rc %d\n", rc); - goto destroy_device; - } - cosm_create_debug_dir(cdev); - return 0; -destroy_device: - device_destroy(g_cosm_class, MKDEV(0, cdev->index)); -scif_exit: - if (atomic_dec_and_test(&g_num_dev)) - cosm_scif_exit(); - return rc; -} - -static void cosm_driver_remove(struct cosm_device *cdev) -{ - cosm_delete_debug_dir(cdev); - sysfs_put(cdev->state_sysfs); - device_destroy(g_cosm_class, MKDEV(0, cdev->index)); - flush_work(&cdev->reset_trigger_work); - cosm_stop(cdev, false); - if (atomic_dec_and_test(&g_num_dev)) - cosm_scif_exit(); - - /* These sysfs entries might have allocated */ - kfree(cdev->cmdline); - kfree(cdev->firmware); - kfree(cdev->ramdisk); - kfree(cdev->bootmode); -} - -static int cosm_suspend(struct device *dev) -{ - struct cosm_device *cdev = dev_to_cosm(dev); - - mutex_lock(&cdev->cosm_mutex); - switch (cdev->state) { - /** - * Suspend/freeze hooks in userspace have already shutdown the card. - * Card should be 'ready' in most cases. It is however possible that - * some userspace application initiated a boot. In those cases, we - * simply reset the card. - */ - case MIC_ONLINE: - case MIC_BOOTING: - case MIC_SHUTTING_DOWN: - mutex_unlock(&cdev->cosm_mutex); - cosm_stop(cdev, false); - break; - default: - mutex_unlock(&cdev->cosm_mutex); - break; - } - return 0; -} - -static const struct dev_pm_ops cosm_pm_ops = { - .suspend = cosm_suspend, - .freeze = cosm_suspend -}; - -static struct cosm_driver cosm_driver = { - .driver = { - .name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .pm = &cosm_pm_ops, - }, - .probe = cosm_driver_probe, - .remove = cosm_driver_remove -}; - -static int __init cosm_init(void) -{ - int ret; - - cosm_init_debugfs(); - - g_cosm_class = class_create(THIS_MODULE, cosm_driver_name); - if (IS_ERR(g_cosm_class)) { - ret = PTR_ERR(g_cosm_class); - pr_err("class_create failed ret %d\n", ret); - goto cleanup_debugfs; - } - - ida_init(&g_cosm_ida); - ret = cosm_register_driver(&cosm_driver); - if (ret) { - pr_err("cosm_register_driver failed ret %d\n", ret); - goto ida_destroy; - } - return 0; -ida_destroy: - ida_destroy(&g_cosm_ida); - class_destroy(g_cosm_class); -cleanup_debugfs: - cosm_exit_debugfs(); - return ret; -} - -static void __exit cosm_exit(void) -{ - cosm_unregister_driver(&cosm_driver); - ida_destroy(&g_cosm_ida); - class_destroy(g_cosm_class); - cosm_exit_debugfs(); -} - -module_init(cosm_init); -module_exit(cosm_exit); - -MODULE_AUTHOR("Intel Corporation"); -MODULE_DESCRIPTION("Intel(R) MIC Coprocessor State Management (COSM) Driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/mic/cosm/cosm_main.h b/drivers/misc/mic/cosm/cosm_main.h deleted file mode 100644 index 5188ad245814..000000000000 --- a/drivers/misc/mic/cosm/cosm_main.h +++ /dev/null @@ -1,61 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2015 Intel Corporation. - * - * Intel MIC Coprocessor State Management (COSM) Driver - */ -#ifndef _COSM_COSM_H_ -#define _COSM_COSM_H_ - -#include <linux/scif.h> -#include "../bus/cosm_bus.h" - -#define COSM_HEARTBEAT_SEND_SEC 30 -#define SCIF_COSM_LISTEN_PORT 201 - -/** - * enum COSM msg id's - * @COSM_MSG_SHUTDOWN: host->card trigger shutdown - * @COSM_MSG_SYNC_TIME: host->card send host time to card to sync time - * @COSM_MSG_HEARTBEAT: card->host heartbeat - * @COSM_MSG_SHUTDOWN_STATUS: card->host with shutdown status as payload - */ -enum cosm_msg_id { - COSM_MSG_SHUTDOWN, - COSM_MSG_SYNC_TIME, - COSM_MSG_HEARTBEAT, - COSM_MSG_SHUTDOWN_STATUS, -}; - -struct cosm_msg { - u64 id; - union { - u64 shutdown_status; - struct { - u64 tv_sec; - u64 tv_nsec; - } timespec; - }; -}; - -extern const char * const cosm_state_string[]; -extern const char * const cosm_shutdown_status_string[]; - -void cosm_sysfs_init(struct cosm_device *cdev); -int cosm_start(struct cosm_device *cdev); -void cosm_stop(struct cosm_device *cdev, bool force); -int cosm_reset(struct cosm_device *cdev); -int cosm_shutdown(struct cosm_device *cdev); -void cosm_set_state(struct cosm_device *cdev, u8 state); -void cosm_set_shutdown_status(struct cosm_device *cdev, u8 status); -void cosm_init_debugfs(void); -void cosm_exit_debugfs(void); -void cosm_create_debug_dir(struct cosm_device *cdev); -void cosm_delete_debug_dir(struct cosm_device *cdev); -int cosm_scif_init(void); -void cosm_scif_exit(void); -void cosm_scif_work(struct work_struct *work); - -#endif diff --git a/drivers/misc/mic/cosm/cosm_scif_server.c b/drivers/misc/mic/cosm/cosm_scif_server.c deleted file mode 100644 index 7baec9fd8756..000000000000 --- a/drivers/misc/mic/cosm/cosm_scif_server.c +++ /dev/null @@ -1,399 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2015 Intel Corporation. - * - * Intel MIC Coprocessor State Management (COSM) Driver - */ -#include <linux/kthread.h> -#include <linux/sched/signal.h> - -#include "cosm_main.h" - -/* - * The COSM driver uses SCIF to communicate between the management node and the - * MIC cards. SCIF is used to (a) Send a shutdown command to the card (b) - * receive a shutdown status back from the card upon completion of shutdown and - * (c) receive periodic heartbeat messages from the card used to deduce if the - * card has crashed. - * - * A COSM server consisting of a SCIF listening endpoint waits for incoming - * connections from the card. Upon acceptance of the connection, a separate - * work-item is scheduled to handle SCIF message processing for that card. The - * life-time of this work-item is therefore the time from which the connection - * from a card is accepted to the time at which the connection is closed. A new - * work-item starts each time the card boots and is alive till the card (a) - * shuts down (b) is reset (c) crashes (d) cosm_client driver on the card is - * unloaded. - * - * From the point of view of COSM interactions with SCIF during card - * shutdown, reset and crash are as follows: - * - * Card shutdown - * ------------- - * 1. COSM client on the card invokes orderly_poweroff() in response to SHUTDOWN - * message from the host. - * 2. Card driver shutdown callback invokes scif_unregister_device(..) resulting - * in scif_remove(..) getting called on the card - * 3. scif_remove -> scif_stop -> scif_handle_remove_node -> - * scif_peer_unregister_device -> device_unregister for the host peer device - * 4. During device_unregister remove(..) method of cosm_client is invoked which - * closes the COSM SCIF endpoint on the card. This results in a SCIF_DISCNCT - * message being sent to host SCIF. SCIF_DISCNCT message processing on the - * host SCIF sets the host COSM SCIF endpoint state to DISCONNECTED and wakes - * up the host COSM thread blocked in scif_poll(..) resulting in - * scif_poll(..) returning EPOLLHUP. - * 5. On the card, scif_peer_release_dev is next called which results in an - * SCIF_EXIT message being sent to the host and after receiving the - * SCIF_EXIT_ACK from the host the peer device teardown on the card is - * complete. - * 6. As part of the SCIF_EXIT message processing on the host, host sends a - * SCIF_REMOVE_NODE to itself corresponding to the card being removed. This - * starts a similar SCIF peer device teardown sequence on the host - * corresponding to the card being shut down. - * - * Card reset - * ---------- - * The case of interest here is when the card has not been previously shut down - * since most of the steps below are skipped in that case: - - * 1. cosm_stop(..) invokes hw_ops->stop(..) method of the base PCIe driver - * which unregisters the SCIF HW device resulting in scif_remove(..) being - * called on the host. - * 2. scif_remove(..) calls scif_disconnect_node(..) which results in a - * SCIF_EXIT message being sent to the card. - * 3. The card executes scif_stop() as part of SCIF_EXIT message - * processing. This results in the COSM endpoint on the card being closed and - * the SCIF host peer device on the card getting unregistered similar to - * steps 3, 4 and 5 for the card shutdown case above. scif_poll(..) on the - * host returns EPOLLHUP as a result. - * 4. On the host, card peer device unregister and SCIF HW remove(..) also - * subsequently complete. - * - * Card crash - * ---------- - * If a reset is issued after the card has crashed, there is no SCIF_DISCNT - * message from the card which would result in scif_poll(..) returning - * EPOLLHUP. In this case when the host SCIF driver sends a SCIF_REMOVE_NODE - * message to itself resulting in the card SCIF peer device being unregistered, - * this results in a scif_peer_release_dev -> scif_cleanup_scifdev-> - * scif_invalidate_ep call sequence which sets the endpoint state to - * DISCONNECTED and results in scif_poll(..) returning EPOLLHUP. - */ - -#define COSM_SCIF_BACKLOG 16 -#define COSM_HEARTBEAT_CHECK_DELTA_SEC 10 -#define COSM_HEARTBEAT_TIMEOUT_SEC \ - (COSM_HEARTBEAT_SEND_SEC + COSM_HEARTBEAT_CHECK_DELTA_SEC) -#define COSM_HEARTBEAT_TIMEOUT_MSEC (COSM_HEARTBEAT_TIMEOUT_SEC * MSEC_PER_SEC) - -static struct task_struct *server_thread; -static scif_epd_t listen_epd; - -/* Publish MIC card's shutdown status to user space MIC daemon */ -static void cosm_update_mic_status(struct cosm_device *cdev) -{ - if (cdev->shutdown_status_int != MIC_NOP) { - cosm_set_shutdown_status(cdev, cdev->shutdown_status_int); - cdev->shutdown_status_int = MIC_NOP; - } -} - -/* Store MIC card's shutdown status internally when it is received */ -static void cosm_shutdown_status_int(struct cosm_device *cdev, - enum mic_status shutdown_status) -{ - switch (shutdown_status) { - case MIC_HALTED: - case MIC_POWER_OFF: - case MIC_RESTART: - case MIC_CRASHED: - break; - default: - dev_err(&cdev->dev, "%s %d Unexpected shutdown_status %d\n", - __func__, __LINE__, shutdown_status); - return; - }; - cdev->shutdown_status_int = shutdown_status; - cdev->heartbeat_watchdog_enable = false; - - if (cdev->state != MIC_SHUTTING_DOWN) - cosm_set_state(cdev, MIC_SHUTTING_DOWN); -} - -/* Non-blocking recv. Read and process all available messages */ -static void cosm_scif_recv(struct cosm_device *cdev) -{ - struct cosm_msg msg; - int rc; - - while (1) { - rc = scif_recv(cdev->epd, &msg, sizeof(msg), 0); - if (!rc) { - break; - } else if (rc < 0) { - dev_dbg(&cdev->dev, "%s: %d rc %d\n", - __func__, __LINE__, rc); - break; - } - dev_dbg(&cdev->dev, "%s: %d rc %d id 0x%llx\n", - __func__, __LINE__, rc, msg.id); - - switch (msg.id) { - case COSM_MSG_SHUTDOWN_STATUS: - cosm_shutdown_status_int(cdev, msg.shutdown_status); - break; - case COSM_MSG_HEARTBEAT: - /* Nothing to do, heartbeat only unblocks scif_poll */ - break; - default: - dev_err(&cdev->dev, "%s: %d unknown msg.id %lld\n", - __func__, __LINE__, msg.id); - break; - } - } -} - -/* Publish crashed status for this MIC card */ -static void cosm_set_crashed(struct cosm_device *cdev) -{ - dev_err(&cdev->dev, "node alive timeout\n"); - cosm_shutdown_status_int(cdev, MIC_CRASHED); - cosm_update_mic_status(cdev); -} - -/* Send host time to the MIC card to sync system time between host and MIC */ -static void cosm_send_time(struct cosm_device *cdev) -{ - struct cosm_msg msg = { .id = COSM_MSG_SYNC_TIME }; - struct timespec64 ts; - int rc; - - ktime_get_real_ts64(&ts); - msg.timespec.tv_sec = ts.tv_sec; - msg.timespec.tv_nsec = ts.tv_nsec; - - rc = scif_send(cdev->epd, &msg, sizeof(msg), SCIF_SEND_BLOCK); - if (rc < 0) - dev_err(&cdev->dev, "%s %d scif_send failed rc %d\n", - __func__, __LINE__, rc); -} - -/* - * Close this cosm_device's endpoint after its peer endpoint on the card has - * been closed. In all cases except MIC card crash EPOLLHUP on the host is - * triggered by the client's endpoint being closed. - */ -static void cosm_scif_close(struct cosm_device *cdev) -{ - /* - * Because SHUTDOWN_STATUS message is sent by the MIC cards in the - * reboot notifier when shutdown is still not complete, we notify mpssd - * to reset the card when SCIF endpoint is closed. - */ - cosm_update_mic_status(cdev); - scif_close(cdev->epd); - cdev->epd = NULL; - dev_dbg(&cdev->dev, "%s %d\n", __func__, __LINE__); -} - -/* - * Set card state to ONLINE when a new SCIF connection from a MIC card is - * received. Normally the state is BOOTING when the connection comes in, but can - * be ONLINE if cosm_client driver on the card was unloaded and then reloaded. - */ -static int cosm_set_online(struct cosm_device *cdev) -{ - int rc = 0; - - if (MIC_BOOTING == cdev->state || MIC_ONLINE == cdev->state) { - cdev->heartbeat_watchdog_enable = cdev->sysfs_heartbeat_enable; - cdev->epd = cdev->newepd; - if (cdev->state == MIC_BOOTING) - cosm_set_state(cdev, MIC_ONLINE); - cosm_send_time(cdev); - dev_dbg(&cdev->dev, "%s %d\n", __func__, __LINE__); - } else { - dev_warn(&cdev->dev, "%s %d not going online in state: %s\n", - __func__, __LINE__, cosm_state_string[cdev->state]); - rc = -EINVAL; - } - /* Drop reference acquired by bus_find_device in the server thread */ - put_device(&cdev->dev); - return rc; -} - -/* - * Work function for handling work for a SCIF connection from a particular MIC - * card. It first sets the card state to ONLINE and then calls scif_poll to - * block on activity such as incoming messages on the SCIF endpoint. When the - * endpoint is closed, the work function exits, completing its life cycle, from - * MIC card boot to card shutdown/reset/crash. - */ -void cosm_scif_work(struct work_struct *work) -{ - struct cosm_device *cdev = container_of(work, struct cosm_device, - scif_work); - struct scif_pollepd pollepd; - int rc; - - mutex_lock(&cdev->cosm_mutex); - if (cosm_set_online(cdev)) - goto exit; - - while (1) { - pollepd.epd = cdev->epd; - pollepd.events = EPOLLIN; - - /* Drop the mutex before blocking in scif_poll(..) */ - mutex_unlock(&cdev->cosm_mutex); - /* poll(..) with timeout on our endpoint */ - rc = scif_poll(&pollepd, 1, COSM_HEARTBEAT_TIMEOUT_MSEC); - mutex_lock(&cdev->cosm_mutex); - if (rc < 0) { - dev_err(&cdev->dev, "%s %d scif_poll rc %d\n", - __func__, __LINE__, rc); - continue; - } - - /* There is a message from the card */ - if (pollepd.revents & EPOLLIN) - cosm_scif_recv(cdev); - - /* The peer endpoint is closed or this endpoint disconnected */ - if (pollepd.revents & EPOLLHUP) { - cosm_scif_close(cdev); - break; - } - - /* Did we timeout from poll? */ - if (!rc && cdev->heartbeat_watchdog_enable) - cosm_set_crashed(cdev); - } -exit: - dev_dbg(&cdev->dev, "%s %d exiting\n", __func__, __LINE__); - mutex_unlock(&cdev->cosm_mutex); -} - -/* - * COSM SCIF server thread function. Accepts incoming SCIF connections from MIC - * cards, finds the correct cosm_device to associate that connection with and - * schedules individual work items for each MIC card. - */ -static int cosm_scif_server(void *unused) -{ - struct cosm_device *cdev; - scif_epd_t newepd; - struct scif_port_id port_id; - int rc; - - allow_signal(SIGKILL); - - while (!kthread_should_stop()) { - rc = scif_accept(listen_epd, &port_id, &newepd, - SCIF_ACCEPT_SYNC); - if (rc < 0) { - if (-ERESTARTSYS != rc) - pr_err("%s %d rc %d\n", __func__, __LINE__, rc); - continue; - } - - /* - * Associate the incoming connection with a particular - * cosm_device, COSM device ID == SCIF node ID - 1 - */ - cdev = cosm_find_cdev_by_id(port_id.node - 1); - if (!cdev) - continue; - cdev->newepd = newepd; - schedule_work(&cdev->scif_work); - } - - pr_debug("%s %d Server thread stopped\n", __func__, __LINE__); - return 0; -} - -static int cosm_scif_listen(void) -{ - int rc; - - listen_epd = scif_open(); - if (!listen_epd) { - pr_err("%s %d scif_open failed\n", __func__, __LINE__); - return -ENOMEM; - } - - rc = scif_bind(listen_epd, SCIF_COSM_LISTEN_PORT); - if (rc < 0) { - pr_err("%s %d scif_bind failed rc %d\n", - __func__, __LINE__, rc); - goto err; - } - - rc = scif_listen(listen_epd, COSM_SCIF_BACKLOG); - if (rc < 0) { - pr_err("%s %d scif_listen rc %d\n", __func__, __LINE__, rc); - goto err; - } - pr_debug("%s %d listen_epd set up\n", __func__, __LINE__); - return 0; -err: - scif_close(listen_epd); - listen_epd = NULL; - return rc; -} - -static void cosm_scif_listen_exit(void) -{ - pr_debug("%s %d closing listen_epd\n", __func__, __LINE__); - if (listen_epd) { - scif_close(listen_epd); - listen_epd = NULL; - } -} - -/* - * Create a listening SCIF endpoint and a server kthread which accepts incoming - * SCIF connections from MIC cards - */ -int cosm_scif_init(void) -{ - int rc = cosm_scif_listen(); - - if (rc) { - pr_err("%s %d cosm_scif_listen rc %d\n", - __func__, __LINE__, rc); - goto err; - } - - server_thread = kthread_run(cosm_scif_server, NULL, "cosm_server"); - if (IS_ERR(server_thread)) { - rc = PTR_ERR(server_thread); - pr_err("%s %d kthread_run rc %d\n", __func__, __LINE__, rc); - goto listen_exit; - } - return 0; -listen_exit: - cosm_scif_listen_exit(); -err: - return rc; -} - -/* Stop the running server thread and close the listening SCIF endpoint */ -void cosm_scif_exit(void) -{ - int rc; - - if (!IS_ERR_OR_NULL(server_thread)) { - rc = send_sig(SIGKILL, server_thread, 0); - if (rc) { - pr_err("%s %d send_sig rc %d\n", - __func__, __LINE__, rc); - return; - } - kthread_stop(server_thread); - } - - cosm_scif_listen_exit(); -} diff --git a/drivers/misc/mic/cosm/cosm_sysfs.c b/drivers/misc/mic/cosm/cosm_sysfs.c deleted file mode 100644 index e6dac967c1af..000000000000 --- a/drivers/misc/mic/cosm/cosm_sysfs.c +++ /dev/null @@ -1,449 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2015 Intel Corporation. - * - * Intel MIC Coprocessor State Management (COSM) Driver - */ -#include <linux/slab.h> -#include "cosm_main.h" - -/* - * A state-to-string lookup table, for exposing a human readable state - * via sysfs. Always keep in sync with enum cosm_states - */ -const char * const cosm_state_string[] = { - [MIC_READY] = "ready", - [MIC_BOOTING] = "booting", - [MIC_ONLINE] = "online", - [MIC_SHUTTING_DOWN] = "shutting_down", - [MIC_RESETTING] = "resetting", - [MIC_RESET_FAILED] = "reset_failed", -}; - -/* - * A shutdown-status-to-string lookup table, for exposing a human - * readable state via sysfs. Always keep in sync with enum cosm_shutdown_status - */ -const char * const cosm_shutdown_status_string[] = { - [MIC_NOP] = "nop", - [MIC_CRASHED] = "crashed", - [MIC_HALTED] = "halted", - [MIC_POWER_OFF] = "poweroff", - [MIC_RESTART] = "restart", -}; - -void cosm_set_shutdown_status(struct cosm_device *cdev, u8 shutdown_status) -{ - dev_dbg(&cdev->dev, "Shutdown Status %s -> %s\n", - cosm_shutdown_status_string[cdev->shutdown_status], - cosm_shutdown_status_string[shutdown_status]); - cdev->shutdown_status = shutdown_status; -} - -void cosm_set_state(struct cosm_device *cdev, u8 state) -{ - dev_dbg(&cdev->dev, "State %s -> %s\n", - cosm_state_string[cdev->state], - cosm_state_string[state]); - cdev->state = state; - sysfs_notify_dirent(cdev->state_sysfs); -} - -static ssize_t -family_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - - if (!cdev) - return -EINVAL; - - return cdev->hw_ops->family(cdev, buf); -} -static DEVICE_ATTR_RO(family); - -static ssize_t -stepping_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - - if (!cdev) - return -EINVAL; - - return cdev->hw_ops->stepping(cdev, buf); -} -static DEVICE_ATTR_RO(stepping); - -static ssize_t -state_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - - if (!cdev || cdev->state >= MIC_LAST) - return -EINVAL; - - return scnprintf(buf, PAGE_SIZE, "%s\n", - cosm_state_string[cdev->state]); -} - -static ssize_t -state_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - int rc; - - if (!cdev) - return -EINVAL; - - if (sysfs_streq(buf, "boot")) { - rc = cosm_start(cdev); - goto done; - } - if (sysfs_streq(buf, "reset")) { - rc = cosm_reset(cdev); - goto done; - } - - if (sysfs_streq(buf, "shutdown")) { - rc = cosm_shutdown(cdev); - goto done; - } - rc = -EINVAL; -done: - if (rc) - count = rc; - return count; -} -static DEVICE_ATTR_RW(state); - -static ssize_t shutdown_status_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - - if (!cdev || cdev->shutdown_status >= MIC_STATUS_LAST) - return -EINVAL; - - return scnprintf(buf, PAGE_SIZE, "%s\n", - cosm_shutdown_status_string[cdev->shutdown_status]); -} -static DEVICE_ATTR_RO(shutdown_status); - -static ssize_t -heartbeat_enable_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - - if (!cdev) - return -EINVAL; - - return scnprintf(buf, PAGE_SIZE, "%d\n", cdev->sysfs_heartbeat_enable); -} - -static ssize_t -heartbeat_enable_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - int enable; - int ret; - - if (!cdev) - return -EINVAL; - - mutex_lock(&cdev->cosm_mutex); - ret = kstrtoint(buf, 10, &enable); - if (ret) - goto unlock; - - cdev->sysfs_heartbeat_enable = enable; - /* if state is not online, cdev->heartbeat_watchdog_enable is 0 */ - if (cdev->state == MIC_ONLINE) - cdev->heartbeat_watchdog_enable = enable; - ret = count; -unlock: - mutex_unlock(&cdev->cosm_mutex); - return ret; -} -static DEVICE_ATTR_RW(heartbeat_enable); - -static ssize_t -cmdline_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - char *cmdline; - - if (!cdev) - return -EINVAL; - - cmdline = cdev->cmdline; - - if (cmdline) - return scnprintf(buf, PAGE_SIZE, "%s\n", cmdline); - return 0; -} - -static ssize_t -cmdline_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - - if (!cdev) - return -EINVAL; - - mutex_lock(&cdev->cosm_mutex); - kfree(cdev->cmdline); - - cdev->cmdline = kmalloc(count + 1, GFP_KERNEL); - if (!cdev->cmdline) { - count = -ENOMEM; - goto unlock; - } - - strncpy(cdev->cmdline, buf, count); - - if (cdev->cmdline[count - 1] == '\n') - cdev->cmdline[count - 1] = '\0'; - else - cdev->cmdline[count] = '\0'; -unlock: - mutex_unlock(&cdev->cosm_mutex); - return count; -} -static DEVICE_ATTR_RW(cmdline); - -static ssize_t -firmware_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - char *firmware; - - if (!cdev) - return -EINVAL; - - firmware = cdev->firmware; - - if (firmware) - return scnprintf(buf, PAGE_SIZE, "%s\n", firmware); - return 0; -} - -static ssize_t -firmware_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - - if (!cdev) - return -EINVAL; - - mutex_lock(&cdev->cosm_mutex); - kfree(cdev->firmware); - - cdev->firmware = kmalloc(count + 1, GFP_KERNEL); - if (!cdev->firmware) { - count = -ENOMEM; - goto unlock; - } - strncpy(cdev->firmware, buf, count); - - if (cdev->firmware[count - 1] == '\n') - cdev->firmware[count - 1] = '\0'; - else - cdev->firmware[count] = '\0'; -unlock: - mutex_unlock(&cdev->cosm_mutex); - return count; -} -static DEVICE_ATTR_RW(firmware); - -static ssize_t -ramdisk_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - char *ramdisk; - - if (!cdev) - return -EINVAL; - - ramdisk = cdev->ramdisk; - - if (ramdisk) - return scnprintf(buf, PAGE_SIZE, "%s\n", ramdisk); - return 0; -} - -static ssize_t -ramdisk_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - - if (!cdev) - return -EINVAL; - - mutex_lock(&cdev->cosm_mutex); - kfree(cdev->ramdisk); - - cdev->ramdisk = kmalloc(count + 1, GFP_KERNEL); - if (!cdev->ramdisk) { - count = -ENOMEM; - goto unlock; - } - - strncpy(cdev->ramdisk, buf, count); - - if (cdev->ramdisk[count - 1] == '\n') - cdev->ramdisk[count - 1] = '\0'; - else - cdev->ramdisk[count] = '\0'; -unlock: - mutex_unlock(&cdev->cosm_mutex); - return count; -} -static DEVICE_ATTR_RW(ramdisk); - -static ssize_t -bootmode_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - char *bootmode; - - if (!cdev) - return -EINVAL; - - bootmode = cdev->bootmode; - - if (bootmode) - return scnprintf(buf, PAGE_SIZE, "%s\n", bootmode); - return 0; -} - -static ssize_t -bootmode_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - - if (!cdev) - return -EINVAL; - - if (!sysfs_streq(buf, "linux") && !sysfs_streq(buf, "flash")) - return -EINVAL; - - mutex_lock(&cdev->cosm_mutex); - kfree(cdev->bootmode); - - cdev->bootmode = kmalloc(count + 1, GFP_KERNEL); - if (!cdev->bootmode) { - count = -ENOMEM; - goto unlock; - } - - strncpy(cdev->bootmode, buf, count); - - if (cdev->bootmode[count - 1] == '\n') - cdev->bootmode[count - 1] = '\0'; - else - cdev->bootmode[count] = '\0'; -unlock: - mutex_unlock(&cdev->cosm_mutex); - return count; -} -static DEVICE_ATTR_RW(bootmode); - -static ssize_t -log_buf_addr_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - - if (!cdev) - return -EINVAL; - - return scnprintf(buf, PAGE_SIZE, "%p\n", cdev->log_buf_addr); -} - -static ssize_t -log_buf_addr_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - int ret; - unsigned long addr; - - if (!cdev) - return -EINVAL; - - ret = kstrtoul(buf, 16, &addr); - if (ret) - goto exit; - - cdev->log_buf_addr = (void *)addr; - ret = count; -exit: - return ret; -} -static DEVICE_ATTR_RW(log_buf_addr); - -static ssize_t -log_buf_len_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - - if (!cdev) - return -EINVAL; - - return scnprintf(buf, PAGE_SIZE, "%p\n", cdev->log_buf_len); -} - -static ssize_t -log_buf_len_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct cosm_device *cdev = dev_get_drvdata(dev); - int ret; - unsigned long addr; - - if (!cdev) - return -EINVAL; - - ret = kstrtoul(buf, 16, &addr); - if (ret) - goto exit; - - cdev->log_buf_len = (int *)addr; - ret = count; -exit: - return ret; -} -static DEVICE_ATTR_RW(log_buf_len); - -static struct attribute *cosm_default_attrs[] = { - &dev_attr_family.attr, - &dev_attr_stepping.attr, - &dev_attr_state.attr, - &dev_attr_shutdown_status.attr, - &dev_attr_heartbeat_enable.attr, - &dev_attr_cmdline.attr, - &dev_attr_firmware.attr, - &dev_attr_ramdisk.attr, - &dev_attr_bootmode.attr, - &dev_attr_log_buf_addr.attr, - &dev_attr_log_buf_len.attr, - - NULL -}; - -ATTRIBUTE_GROUPS(cosm_default); - -void cosm_sysfs_init(struct cosm_device *cdev) -{ - cdev->attr_group = cosm_default_groups; -} diff --git a/drivers/misc/mic/cosm_client/Makefile b/drivers/misc/mic/cosm_client/Makefile deleted file mode 100644 index 5b62270bc2ab..000000000000 --- a/drivers/misc/mic/cosm_client/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile - Intel MIC COSM Client Driver -# Copyright(c) 2015, Intel Corporation. -# -obj-$(CONFIG_MIC_COSM) += cosm_client.o - -cosm_client-objs += cosm_scif_client.o diff --git a/drivers/misc/mic/cosm_client/cosm_scif_client.c b/drivers/misc/mic/cosm_client/cosm_scif_client.c deleted file mode 100644 index a03213dd9319..000000000000 --- a/drivers/misc/mic/cosm_client/cosm_scif_client.c +++ /dev/null @@ -1,269 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2015 Intel Corporation. - * - * Intel MIC COSM Client Driver - */ -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/reboot.h> -#include <linux/kthread.h> -#include <linux/sched/signal.h> - -#include "../cosm/cosm_main.h" - -#define COSM_SCIF_MAX_RETRIES 10 -#define COSM_HEARTBEAT_SEND_MSEC (COSM_HEARTBEAT_SEND_SEC * MSEC_PER_SEC) - -static struct task_struct *client_thread; -static scif_epd_t client_epd; -static struct scif_peer_dev *client_spdev; - -/* - * Reboot notifier: receives shutdown status from the OS and communicates it - * back to the COSM process on the host - */ -static int cosm_reboot_event(struct notifier_block *this, unsigned long event, - void *ptr) -{ - struct cosm_msg msg = { .id = COSM_MSG_SHUTDOWN_STATUS }; - int rc; - - event = (event == SYS_RESTART) ? SYSTEM_RESTART : event; - dev_info(&client_spdev->dev, "%s %d received event %ld\n", - __func__, __LINE__, event); - - msg.shutdown_status = event; - rc = scif_send(client_epd, &msg, sizeof(msg), SCIF_SEND_BLOCK); - if (rc < 0) - dev_err(&client_spdev->dev, "%s %d scif_send rc %d\n", - __func__, __LINE__, rc); - - return NOTIFY_DONE; -} - -static struct notifier_block cosm_reboot = { - .notifier_call = cosm_reboot_event, -}; - -/* Set system time from timespec value received from the host */ -static void cosm_set_time(struct cosm_msg *msg) -{ - struct timespec64 ts = { - .tv_sec = msg->timespec.tv_sec, - .tv_nsec = msg->timespec.tv_nsec, - }; - int rc = do_settimeofday64(&ts); - - if (rc) - dev_err(&client_spdev->dev, "%s: %d settimeofday rc %d\n", - __func__, __LINE__, rc); -} - -/* COSM client receive message processing */ -static void cosm_client_recv(void) -{ - struct cosm_msg msg; - int rc; - - while (1) { - rc = scif_recv(client_epd, &msg, sizeof(msg), 0); - if (!rc) { - return; - } else if (rc < 0) { - dev_err(&client_spdev->dev, "%s: %d rc %d\n", - __func__, __LINE__, rc); - return; - } - - dev_dbg(&client_spdev->dev, "%s: %d rc %d id 0x%llx\n", - __func__, __LINE__, rc, msg.id); - - switch (msg.id) { - case COSM_MSG_SYNC_TIME: - cosm_set_time(&msg); - break; - case COSM_MSG_SHUTDOWN: - orderly_poweroff(true); - break; - default: - dev_err(&client_spdev->dev, "%s: %d unknown id %lld\n", - __func__, __LINE__, msg.id); - break; - } - } -} - -/* Initiate connection to the COSM server on the host */ -static int cosm_scif_connect(void) -{ - struct scif_port_id port_id; - int i, rc; - - client_epd = scif_open(); - if (!client_epd) { - dev_err(&client_spdev->dev, "%s %d scif_open failed\n", - __func__, __LINE__); - return -ENOMEM; - } - - port_id.node = 0; - port_id.port = SCIF_COSM_LISTEN_PORT; - - for (i = 0; i < COSM_SCIF_MAX_RETRIES; i++) { - rc = scif_connect(client_epd, &port_id); - if (rc < 0) - msleep(1000); - else - break; - } - - if (rc < 0) { - dev_err(&client_spdev->dev, "%s %d scif_connect rc %d\n", - __func__, __LINE__, rc); - scif_close(client_epd); - client_epd = NULL; - } - return rc < 0 ? rc : 0; -} - -/* Close host SCIF connection */ -static void cosm_scif_connect_exit(void) -{ - if (client_epd) { - scif_close(client_epd); - client_epd = NULL; - } -} - -/* - * COSM SCIF client thread function: waits for messages from the host and sends - * a heartbeat to the host - */ -static int cosm_scif_client(void *unused) -{ - struct cosm_msg msg = { .id = COSM_MSG_HEARTBEAT }; - struct scif_pollepd pollepd; - int rc; - - allow_signal(SIGKILL); - - while (!kthread_should_stop()) { - pollepd.epd = client_epd; - pollepd.events = EPOLLIN; - - rc = scif_poll(&pollepd, 1, COSM_HEARTBEAT_SEND_MSEC); - if (rc < 0) { - if (-EINTR != rc) - dev_err(&client_spdev->dev, - "%s %d scif_poll rc %d\n", - __func__, __LINE__, rc); - continue; - } - - if (pollepd.revents & EPOLLIN) - cosm_client_recv(); - - msg.id = COSM_MSG_HEARTBEAT; - rc = scif_send(client_epd, &msg, sizeof(msg), SCIF_SEND_BLOCK); - if (rc < 0) - dev_err(&client_spdev->dev, "%s %d scif_send rc %d\n", - __func__, __LINE__, rc); - } - - dev_dbg(&client_spdev->dev, "%s %d Client thread stopped\n", - __func__, __LINE__); - return 0; -} - -static void cosm_scif_probe(struct scif_peer_dev *spdev) -{ - int rc; - - dev_dbg(&spdev->dev, "%s %d: dnode %d\n", - __func__, __LINE__, spdev->dnode); - - /* We are only interested in the host with spdev->dnode == 0 */ - if (spdev->dnode) - return; - - client_spdev = spdev; - rc = cosm_scif_connect(); - if (rc) - goto exit; - - rc = register_reboot_notifier(&cosm_reboot); - if (rc) { - dev_err(&spdev->dev, - "reboot notifier registration failed rc %d\n", rc); - goto connect_exit; - } - - client_thread = kthread_run(cosm_scif_client, NULL, "cosm_client"); - if (IS_ERR(client_thread)) { - rc = PTR_ERR(client_thread); - dev_err(&spdev->dev, "%s %d kthread_run rc %d\n", - __func__, __LINE__, rc); - goto unreg_reboot; - } - return; -unreg_reboot: - unregister_reboot_notifier(&cosm_reboot); -connect_exit: - cosm_scif_connect_exit(); -exit: - client_spdev = NULL; -} - -static void cosm_scif_remove(struct scif_peer_dev *spdev) -{ - int rc; - - dev_dbg(&spdev->dev, "%s %d: dnode %d\n", - __func__, __LINE__, spdev->dnode); - - if (spdev->dnode) - return; - - if (!IS_ERR_OR_NULL(client_thread)) { - rc = send_sig(SIGKILL, client_thread, 0); - if (rc) { - pr_err("%s %d send_sig rc %d\n", - __func__, __LINE__, rc); - return; - } - kthread_stop(client_thread); - } - unregister_reboot_notifier(&cosm_reboot); - cosm_scif_connect_exit(); - client_spdev = NULL; -} - -static struct scif_client scif_client_cosm = { - .name = KBUILD_MODNAME, - .probe = cosm_scif_probe, - .remove = cosm_scif_remove, -}; - -static int __init cosm_client_init(void) -{ - int rc = scif_client_register(&scif_client_cosm); - - if (rc) - pr_err("scif_client_register failed rc %d\n", rc); - return rc; -} - -static void __exit cosm_client_exit(void) -{ - scif_client_unregister(&scif_client_cosm); -} - -module_init(cosm_client_init); -module_exit(cosm_client_exit); - -MODULE_AUTHOR("Intel Corporation"); -MODULE_DESCRIPTION("Intel(R) MIC card OS state management client driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/mic/host/Makefile b/drivers/misc/mic/host/Makefile deleted file mode 100644 index 25f153367980..000000000000 --- a/drivers/misc/mic/host/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile - Intel MIC Linux driver. -# Copyright(c) 2013, Intel Corporation. -# -obj-$(CONFIG_INTEL_MIC_HOST) += mic_host.o -mic_host-objs := mic_main.o -mic_host-objs += mic_x100.o -mic_host-objs += mic_smpt.o -mic_host-objs += mic_intr.o -mic_host-objs += mic_boot.o -mic_host-objs += mic_debugfs.o diff --git a/drivers/misc/mic/host/mic_boot.c b/drivers/misc/mic/host/mic_boot.c deleted file mode 100644 index 8cb85b8b3e19..000000000000 --- a/drivers/misc/mic/host/mic_boot.c +++ /dev/null @@ -1,588 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Intel MIC Host driver. - */ -#include <linux/delay.h> -#include <linux/firmware.h> -#include <linux/pci.h> -#include <linux/kmod.h> -#include <linux/dma-map-ops.h> -#include <linux/mic_common.h> -#include <linux/mic_bus.h> -#include "../bus/scif_bus.h" -#include "../bus/vop_bus.h" -#include "../common/mic_dev.h" -#include "mic_device.h" -#include "mic_smpt.h" - -static inline struct mic_device *vpdev_to_mdev(struct device *dev) -{ - return dev_get_drvdata(dev->parent); -} - -static dma_addr_t -_mic_dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction dir, unsigned long attrs) -{ - void *va = phys_to_virt(page_to_phys(page)) + offset; - struct mic_device *mdev = vpdev_to_mdev(dev); - - return mic_map_single(mdev, va, size); -} - -static void _mic_dma_unmap_page(struct device *dev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction dir, - unsigned long attrs) -{ - struct mic_device *mdev = vpdev_to_mdev(dev); - - mic_unmap_single(mdev, dma_addr, size); -} - -static const struct dma_map_ops _mic_dma_ops = { - .map_page = _mic_dma_map_page, - .unmap_page = _mic_dma_unmap_page, -}; - -static struct mic_irq * -__mic_request_irq(struct vop_device *vpdev, - irqreturn_t (*func)(int irq, void *data), - const char *name, void *data, int intr_src) -{ - struct mic_device *mdev = vpdev_to_mdev(&vpdev->dev); - - return mic_request_threaded_irq(mdev, func, NULL, name, data, - intr_src, MIC_INTR_DB); -} - -static void __mic_free_irq(struct vop_device *vpdev, - struct mic_irq *cookie, void *data) -{ - struct mic_device *mdev = vpdev_to_mdev(&vpdev->dev); - - mic_free_irq(mdev, cookie, data); -} - -static void __mic_ack_interrupt(struct vop_device *vpdev, int num) -{ - struct mic_device *mdev = vpdev_to_mdev(&vpdev->dev); - - mdev->ops->intr_workarounds(mdev); -} - -static int __mic_next_db(struct vop_device *vpdev) -{ - struct mic_device *mdev = vpdev_to_mdev(&vpdev->dev); - - return mic_next_db(mdev); -} - -static void *__mic_get_dp(struct vop_device *vpdev) -{ - struct mic_device *mdev = vpdev_to_mdev(&vpdev->dev); - - return mdev->dp; -} - -static void __iomem *__mic_get_remote_dp(struct vop_device *vpdev) -{ - return NULL; -} - -static void __mic_send_intr(struct vop_device *vpdev, int db) -{ - struct mic_device *mdev = vpdev_to_mdev(&vpdev->dev); - - mdev->ops->send_intr(mdev, db); -} - -static void __iomem *__mic_ioremap(struct vop_device *vpdev, - dma_addr_t pa, size_t len) -{ - struct mic_device *mdev = vpdev_to_mdev(&vpdev->dev); - - return mdev->aper.va + pa; -} - -static void __mic_iounmap(struct vop_device *vpdev, void __iomem *va) -{ - /* nothing to do */ -} - -static struct vop_hw_ops vop_hw_ops = { - .request_irq = __mic_request_irq, - .free_irq = __mic_free_irq, - .ack_interrupt = __mic_ack_interrupt, - .next_db = __mic_next_db, - .get_dp = __mic_get_dp, - .get_remote_dp = __mic_get_remote_dp, - .send_intr = __mic_send_intr, - .remap = __mic_ioremap, - .unmap = __mic_iounmap, -}; - -static inline struct mic_device *scdev_to_mdev(struct scif_hw_dev *scdev) -{ - return dev_get_drvdata(scdev->dev.parent); -} - -static void *__mic_dma_alloc(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t gfp, - unsigned long attrs) -{ - struct scif_hw_dev *scdev = dev_get_drvdata(dev); - struct mic_device *mdev = scdev_to_mdev(scdev); - dma_addr_t tmp; - void *va = kzalloc(size, gfp); - - if (va) { - tmp = mic_map_single(mdev, va, size); - if (dma_mapping_error(dev, tmp)) { - kfree(va); - va = NULL; - } else { - *dma_handle = tmp; - } - } - return va; -} - -static void __mic_dma_free(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle, unsigned long attrs) -{ - struct scif_hw_dev *scdev = dev_get_drvdata(dev); - struct mic_device *mdev = scdev_to_mdev(scdev); - - mic_unmap_single(mdev, dma_handle, size); - kfree(vaddr); -} - -static dma_addr_t -__mic_dma_map_page(struct device *dev, struct page *page, unsigned long offset, - size_t size, enum dma_data_direction dir, - unsigned long attrs) -{ - void *va = phys_to_virt(page_to_phys(page)) + offset; - struct scif_hw_dev *scdev = dev_get_drvdata(dev); - struct mic_device *mdev = scdev_to_mdev(scdev); - - return mic_map_single(mdev, va, size); -} - -static void -__mic_dma_unmap_page(struct device *dev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction dir, - unsigned long attrs) -{ - struct scif_hw_dev *scdev = dev_get_drvdata(dev); - struct mic_device *mdev = scdev_to_mdev(scdev); - - mic_unmap_single(mdev, dma_addr, size); -} - -static int __mic_dma_map_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction dir, - unsigned long attrs) -{ - struct scif_hw_dev *scdev = dev_get_drvdata(dev); - struct mic_device *mdev = scdev_to_mdev(scdev); - struct scatterlist *s; - int i, j, ret; - dma_addr_t da; - - ret = dma_map_sg(&mdev->pdev->dev, sg, nents, dir); - if (ret <= 0) - return 0; - - for_each_sg(sg, s, nents, i) { - da = mic_map(mdev, sg_dma_address(s) + s->offset, s->length); - if (!da) - goto err; - sg_dma_address(s) = da; - } - return nents; -err: - for_each_sg(sg, s, i, j) { - mic_unmap(mdev, sg_dma_address(s), s->length); - sg_dma_address(s) = mic_to_dma_addr(mdev, sg_dma_address(s)); - } - dma_unmap_sg(&mdev->pdev->dev, sg, nents, dir); - return 0; -} - -static void __mic_dma_unmap_sg(struct device *dev, - struct scatterlist *sg, int nents, - enum dma_data_direction dir, - unsigned long attrs) -{ - struct scif_hw_dev *scdev = dev_get_drvdata(dev); - struct mic_device *mdev = scdev_to_mdev(scdev); - struct scatterlist *s; - dma_addr_t da; - int i; - - for_each_sg(sg, s, nents, i) { - da = mic_to_dma_addr(mdev, sg_dma_address(s)); - mic_unmap(mdev, sg_dma_address(s), s->length); - sg_dma_address(s) = da; - } - dma_unmap_sg(&mdev->pdev->dev, sg, nents, dir); -} - -static const struct dma_map_ops __mic_dma_ops = { - .alloc = __mic_dma_alloc, - .free = __mic_dma_free, - .map_page = __mic_dma_map_page, - .unmap_page = __mic_dma_unmap_page, - .map_sg = __mic_dma_map_sg, - .unmap_sg = __mic_dma_unmap_sg, -}; - -static struct mic_irq * -___mic_request_irq(struct scif_hw_dev *scdev, - irqreturn_t (*func)(int irq, void *data), - const char *name, - void *data, int db) -{ - struct mic_device *mdev = scdev_to_mdev(scdev); - - return mic_request_threaded_irq(mdev, func, NULL, name, data, - db, MIC_INTR_DB); -} - -static void -___mic_free_irq(struct scif_hw_dev *scdev, - struct mic_irq *cookie, void *data) -{ - struct mic_device *mdev = scdev_to_mdev(scdev); - - mic_free_irq(mdev, cookie, data); -} - -static void ___mic_ack_interrupt(struct scif_hw_dev *scdev, int num) -{ - struct mic_device *mdev = scdev_to_mdev(scdev); - - mdev->ops->intr_workarounds(mdev); -} - -static int ___mic_next_db(struct scif_hw_dev *scdev) -{ - struct mic_device *mdev = scdev_to_mdev(scdev); - - return mic_next_db(mdev); -} - -static void ___mic_send_intr(struct scif_hw_dev *scdev, int db) -{ - struct mic_device *mdev = scdev_to_mdev(scdev); - - mdev->ops->send_intr(mdev, db); -} - -static void __iomem *___mic_ioremap(struct scif_hw_dev *scdev, - phys_addr_t pa, size_t len) -{ - struct mic_device *mdev = scdev_to_mdev(scdev); - - return mdev->aper.va + pa; -} - -static void ___mic_iounmap(struct scif_hw_dev *scdev, void __iomem *va) -{ - /* nothing to do */ -} - -static struct scif_hw_ops scif_hw_ops = { - .request_irq = ___mic_request_irq, - .free_irq = ___mic_free_irq, - .ack_interrupt = ___mic_ack_interrupt, - .next_db = ___mic_next_db, - .send_intr = ___mic_send_intr, - .remap = ___mic_ioremap, - .unmap = ___mic_iounmap, -}; - -static inline struct mic_device *mbdev_to_mdev(struct mbus_device *mbdev) -{ - return dev_get_drvdata(mbdev->dev.parent); -} - -static dma_addr_t -mic_dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, enum dma_data_direction dir, - unsigned long attrs) -{ - void *va = phys_to_virt(page_to_phys(page)) + offset; - struct mic_device *mdev = dev_get_drvdata(dev->parent); - - return mic_map_single(mdev, va, size); -} - -static void -mic_dma_unmap_page(struct device *dev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction dir, - unsigned long attrs) -{ - struct mic_device *mdev = dev_get_drvdata(dev->parent); - mic_unmap_single(mdev, dma_addr, size); -} - -static const struct dma_map_ops mic_dma_ops = { - .map_page = mic_dma_map_page, - .unmap_page = mic_dma_unmap_page, -}; - -static struct mic_irq * -_mic_request_threaded_irq(struct mbus_device *mbdev, - irq_handler_t handler, irq_handler_t thread_fn, - const char *name, void *data, int intr_src) -{ - return mic_request_threaded_irq(mbdev_to_mdev(mbdev), handler, - thread_fn, name, data, - intr_src, MIC_INTR_DMA); -} - -static void _mic_free_irq(struct mbus_device *mbdev, - struct mic_irq *cookie, void *data) -{ - mic_free_irq(mbdev_to_mdev(mbdev), cookie, data); -} - -static void _mic_ack_interrupt(struct mbus_device *mbdev, int num) -{ - struct mic_device *mdev = mbdev_to_mdev(mbdev); - mdev->ops->intr_workarounds(mdev); -} - -static struct mbus_hw_ops mbus_hw_ops = { - .request_threaded_irq = _mic_request_threaded_irq, - .free_irq = _mic_free_irq, - .ack_interrupt = _mic_ack_interrupt, -}; - -/* Initialize the MIC bootparams */ -void mic_bootparam_init(struct mic_device *mdev) -{ - struct mic_bootparam *bootparam = mdev->dp; - - bootparam->magic = cpu_to_le32(MIC_MAGIC); - bootparam->h2c_config_db = -1; - bootparam->node_id = mdev->id + 1; - bootparam->scif_host_dma_addr = 0x0; - bootparam->scif_card_dma_addr = 0x0; - bootparam->c2h_scif_db = -1; - bootparam->h2c_scif_db = -1; -} - -static inline struct mic_device *cosmdev_to_mdev(struct cosm_device *cdev) -{ - return dev_get_drvdata(cdev->dev.parent); -} - -static void _mic_reset(struct cosm_device *cdev) -{ - struct mic_device *mdev = cosmdev_to_mdev(cdev); - - mdev->ops->reset_fw_ready(mdev); - mdev->ops->reset(mdev); -} - -static bool _mic_ready(struct cosm_device *cdev) -{ - struct mic_device *mdev = cosmdev_to_mdev(cdev); - - return mdev->ops->is_fw_ready(mdev); -} - -/** - * mic_request_dma_chans - Request DMA channels - * @mdev: pointer to mic_device instance - * - * returns number of DMA channels acquired - */ -static int mic_request_dma_chans(struct mic_device *mdev) -{ - dma_cap_mask_t mask; - struct dma_chan *chan; - - dma_cap_zero(mask); - dma_cap_set(DMA_MEMCPY, mask); - - do { - chan = dma_request_channel(mask, mdev->ops->dma_filter, - &mdev->pdev->dev); - if (chan) { - mdev->dma_ch[mdev->num_dma_ch++] = chan; - if (mdev->num_dma_ch >= MIC_MAX_DMA_CHAN) - break; - } - } while (chan); - dev_info(&mdev->pdev->dev, "DMA channels # %d\n", mdev->num_dma_ch); - return mdev->num_dma_ch; -} - -/** - * mic_free_dma_chans - release DMA channels - * @mdev: pointer to mic_device instance - * - * returns none - */ -static void mic_free_dma_chans(struct mic_device *mdev) -{ - int i = 0; - - for (i = 0; i < mdev->num_dma_ch; i++) { - dma_release_channel(mdev->dma_ch[i]); - mdev->dma_ch[i] = NULL; - } - mdev->num_dma_ch = 0; -} - -/** - * _mic_start - Start the MIC. - * @cdev: pointer to cosm_device instance - * @id: MIC device id/index provided by COSM used in other drivers like SCIF - * - * This function prepares an MIC for boot and initiates boot. - * RETURNS: An appropriate -ERRNO error value on error, or zero for success. - * - * For all cosm_hw_ops the caller holds a mutex to ensure serialization. - */ -static int _mic_start(struct cosm_device *cdev, int id) -{ - struct mic_device *mdev = cosmdev_to_mdev(cdev); - int rc; - - mic_bootparam_init(mdev); - mdev->dma_mbdev = mbus_register_device(&mdev->pdev->dev, - MBUS_DEV_DMA_HOST, &mic_dma_ops, - &mbus_hw_ops, id, mdev->mmio.va); - if (IS_ERR(mdev->dma_mbdev)) { - rc = PTR_ERR(mdev->dma_mbdev); - goto unlock_ret; - } - if (!mic_request_dma_chans(mdev)) { - rc = -ENODEV; - goto dma_remove; - } - mdev->scdev = scif_register_device(&mdev->pdev->dev, MIC_SCIF_DEV, - &__mic_dma_ops, &scif_hw_ops, - id + 1, 0, &mdev->mmio, - &mdev->aper, mdev->dp, NULL, - mdev->dma_ch, mdev->num_dma_ch, - true); - if (IS_ERR(mdev->scdev)) { - rc = PTR_ERR(mdev->scdev); - goto dma_free; - } - - mdev->vpdev = vop_register_device(&mdev->pdev->dev, - VOP_DEV_TRNSP, &_mic_dma_ops, - &vop_hw_ops, id + 1, &mdev->aper, - mdev->dma_ch[0]); - if (IS_ERR(mdev->vpdev)) { - rc = PTR_ERR(mdev->vpdev); - goto scif_remove; - } - - rc = mdev->ops->load_mic_fw(mdev, NULL); - if (rc) - goto vop_remove; - mic_smpt_restore(mdev); - mic_intr_restore(mdev); - mdev->intr_ops->enable_interrupts(mdev); - mdev->ops->write_spad(mdev, MIC_DPLO_SPAD, mdev->dp_dma_addr); - mdev->ops->write_spad(mdev, MIC_DPHI_SPAD, mdev->dp_dma_addr >> 32); - mdev->ops->send_firmware_intr(mdev); - goto unlock_ret; -vop_remove: - vop_unregister_device(mdev->vpdev); -scif_remove: - scif_unregister_device(mdev->scdev); -dma_free: - mic_free_dma_chans(mdev); -dma_remove: - mbus_unregister_device(mdev->dma_mbdev); -unlock_ret: - return rc; -} - -/** - * _mic_stop - Prepare the MIC for reset and trigger reset. - * @cdev: pointer to cosm_device instance - * @force: force a MIC to reset even if it is already offline. - * - * RETURNS: None. - */ -static void _mic_stop(struct cosm_device *cdev, bool force) -{ - struct mic_device *mdev = cosmdev_to_mdev(cdev); - - /* - * Since SCIF handles card shutdown and reset (using COSM), it will - * will be the first to be registered and the last to be - * unregistered. - */ - vop_unregister_device(mdev->vpdev); - scif_unregister_device(mdev->scdev); - mic_free_dma_chans(mdev); - mbus_unregister_device(mdev->dma_mbdev); - mic_bootparam_init(mdev); -} - -static ssize_t _mic_family(struct cosm_device *cdev, char *buf) -{ - struct mic_device *mdev = cosmdev_to_mdev(cdev); - static const char *family[MIC_FAMILY_LAST] = { "x100", "Unknown" }; - - return scnprintf(buf, PAGE_SIZE, "%s\n", family[mdev->family]); -} - -static ssize_t _mic_stepping(struct cosm_device *cdev, char *buf) -{ - struct mic_device *mdev = cosmdev_to_mdev(cdev); - const char *string = "??"; - - switch (mdev->stepping) { - case MIC_A0_STEP: - string = "A0"; - break; - case MIC_B0_STEP: - string = "B0"; - break; - case MIC_B1_STEP: - string = "B1"; - break; - case MIC_C0_STEP: - string = "C0"; - break; - default: - break; - } - return scnprintf(buf, PAGE_SIZE, "%s\n", string); -} - -static struct mic_mw *_mic_aper(struct cosm_device *cdev) -{ - struct mic_device *mdev = cosmdev_to_mdev(cdev); - - return &mdev->aper; -} - -struct cosm_hw_ops cosm_hw_ops = { - .reset = _mic_reset, - .force_reset = _mic_reset, - .post_reset = NULL, - .ready = _mic_ready, - .start = _mic_start, - .stop = _mic_stop, - .family = _mic_family, - .stepping = _mic_stepping, - .aper = _mic_aper, -}; diff --git a/drivers/misc/mic/host/mic_debugfs.c b/drivers/misc/mic/host/mic_debugfs.c deleted file mode 100644 index ffda740e20d5..000000000000 --- a/drivers/misc/mic/host/mic_debugfs.c +++ /dev/null @@ -1,149 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Intel MIC Host driver. - */ -#include <linux/debugfs.h> -#include <linux/pci.h> -#include <linux/seq_file.h> - -#include <linux/mic_common.h> -#include "../common/mic_dev.h" -#include "mic_device.h" -#include "mic_smpt.h" - -/* Debugfs parent dir */ -static struct dentry *mic_dbg; - -static int mic_smpt_show(struct seq_file *s, void *pos) -{ - int i; - struct mic_device *mdev = s->private; - unsigned long flags; - - seq_printf(s, "MIC %-2d |%-10s| %-14s %-10s\n", - mdev->id, "SMPT entry", "SW DMA addr", "RefCount"); - seq_puts(s, "====================================================\n"); - - if (mdev->smpt) { - struct mic_smpt_info *smpt_info = mdev->smpt; - spin_lock_irqsave(&smpt_info->smpt_lock, flags); - for (i = 0; i < smpt_info->info.num_reg; i++) { - seq_printf(s, "%9s|%-10d| %-#14llx %-10lld\n", - " ", i, smpt_info->entry[i].dma_addr, - smpt_info->entry[i].ref_count); - } - spin_unlock_irqrestore(&smpt_info->smpt_lock, flags); - } - seq_puts(s, "====================================================\n"); - return 0; -} - -DEFINE_SHOW_ATTRIBUTE(mic_smpt); - -static int mic_post_code_show(struct seq_file *s, void *pos) -{ - struct mic_device *mdev = s->private; - u32 reg = mdev->ops->get_postcode(mdev); - - seq_printf(s, "%c%c", reg & 0xff, (reg >> 8) & 0xff); - return 0; -} - -DEFINE_SHOW_ATTRIBUTE(mic_post_code); - -static int mic_msi_irq_info_show(struct seq_file *s, void *pos) -{ - struct mic_device *mdev = s->private; - int reg; - int i, j; - u16 entry; - u16 vector; - struct pci_dev *pdev = mdev->pdev; - - if (pci_dev_msi_enabled(pdev)) { - for (i = 0; i < mdev->irq_info.num_vectors; i++) { - if (pdev->msix_enabled) { - entry = mdev->irq_info.msix_entries[i].entry; - vector = mdev->irq_info.msix_entries[i].vector; - } else { - entry = 0; - vector = pdev->irq; - } - - reg = mdev->intr_ops->read_msi_to_src_map(mdev, entry); - - seq_printf(s, "%s %-10d %s %-10d MXAR[%d]: %08X\n", - "IRQ:", vector, "Entry:", entry, i, reg); - - seq_printf(s, "%-10s", "offset:"); - for (j = (MIC_NUM_OFFSETS - 1); j >= 0; j--) - seq_printf(s, "%4d ", j); - seq_puts(s, "\n"); - - - seq_printf(s, "%-10s", "count:"); - for (j = (MIC_NUM_OFFSETS - 1); j >= 0; j--) - seq_printf(s, "%4d ", - (mdev->irq_info.mic_msi_map[i] & - BIT(j)) ? 1 : 0); - seq_puts(s, "\n\n"); - } - } else { - seq_puts(s, "MSI/MSIx interrupts not enabled\n"); - } - - return 0; -} - -DEFINE_SHOW_ATTRIBUTE(mic_msi_irq_info); - -/* - * mic_create_debug_dir - Initialize MIC debugfs entries. - */ -void mic_create_debug_dir(struct mic_device *mdev) -{ - char name[16]; - - if (!mic_dbg) - return; - - scnprintf(name, sizeof(name), "mic%d", mdev->id); - mdev->dbg_dir = debugfs_create_dir(name, mic_dbg); - - debugfs_create_file("smpt", 0444, mdev->dbg_dir, mdev, - &mic_smpt_fops); - - debugfs_create_file("post_code", 0444, mdev->dbg_dir, mdev, - &mic_post_code_fops); - - debugfs_create_file("msi_irq_info", 0444, mdev->dbg_dir, mdev, - &mic_msi_irq_info_fops); -} - -/* - * mic_delete_debug_dir - Uninitialize MIC debugfs entries. - */ -void mic_delete_debug_dir(struct mic_device *mdev) -{ - debugfs_remove_recursive(mdev->dbg_dir); -} - -/* - * mic_init_debugfs - Initialize global debugfs entry. - */ -void __init mic_init_debugfs(void) -{ - mic_dbg = debugfs_create_dir(KBUILD_MODNAME, NULL); -} - -/* - * mic_exit_debugfs - Uninitialize global debugfs entry - */ -void mic_exit_debugfs(void) -{ - debugfs_remove(mic_dbg); -} diff --git a/drivers/misc/mic/host/mic_device.h b/drivers/misc/mic/host/mic_device.h deleted file mode 100644 index 41bcd308ae59..000000000000 --- a/drivers/misc/mic/host/mic_device.h +++ /dev/null @@ -1,157 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Intel MIC Host driver. - */ -#ifndef _MIC_DEVICE_H_ -#define _MIC_DEVICE_H_ - -#include <linux/cdev.h> -#include <linux/idr.h> -#include <linux/notifier.h> -#include <linux/irqreturn.h> -#include <linux/dmaengine.h> -#include <linux/miscdevice.h> -#include <linux/mic_bus.h> -#include "../bus/scif_bus.h" -#include "../bus/vop_bus.h" -#include "../bus/cosm_bus.h" -#include "mic_intr.h" - -/** - * enum mic_stepping - MIC stepping ids. - */ -enum mic_stepping { - MIC_A0_STEP = 0x0, - MIC_B0_STEP = 0x10, - MIC_B1_STEP = 0x11, - MIC_C0_STEP = 0x20, -}; - -extern struct cosm_hw_ops cosm_hw_ops; - -/** - * struct mic_device - MIC device information for each card. - * - * @mmio: MMIO bar information. - * @aper: Aperture bar information. - * @family: The MIC family to which this device belongs. - * @ops: MIC HW specific operations. - * @id: The unique device id for this MIC device. - * @stepping: Stepping ID. - * @pdev: Underlying PCI device. - * @mic_mutex: Mutex for synchronizing access to mic_device. - * @intr_ops: HW specific interrupt operations. - * @smpt_ops: Hardware specific SMPT operations. - * @smpt: MIC SMPT information. - * @intr_info: H/W specific interrupt information. - * @irq_info: The OS specific irq information - * @dbg_dir: debugfs directory of this MIC device. - * @bootaddr: MIC boot address. - * @dp: virtio device page - * @dp_dma_addr: virtio device page DMA address. - * @dma_mbdev: MIC BUS DMA device. - * @dma_ch - Array of DMA channels - * @num_dma_ch - Number of DMA channels available - * @scdev: SCIF device on the SCIF virtual bus. - * @vpdev: Virtio over PCIe device on the VOP virtual bus. - * @cosm_dev: COSM device - */ -struct mic_device { - struct mic_mw mmio; - struct mic_mw aper; - enum mic_hw_family family; - struct mic_hw_ops *ops; - int id; - enum mic_stepping stepping; - struct pci_dev *pdev; - struct mutex mic_mutex; - struct mic_hw_intr_ops *intr_ops; - struct mic_smpt_ops *smpt_ops; - struct mic_smpt_info *smpt; - struct mic_intr_info *intr_info; - struct mic_irq_info irq_info; - struct dentry *dbg_dir; - u32 bootaddr; - void *dp; - dma_addr_t dp_dma_addr; - struct mbus_device *dma_mbdev; - struct dma_chan *dma_ch[MIC_MAX_DMA_CHAN]; - int num_dma_ch; - struct scif_hw_dev *scdev; - struct vop_device *vpdev; - struct cosm_device *cosm_dev; -}; - -/** - * struct mic_hw_ops - MIC HW specific operations. - * @aper_bar: Aperture bar resource number. - * @mmio_bar: MMIO bar resource number. - * @read_spad: Read from scratch pad register. - * @write_spad: Write to scratch pad register. - * @send_intr: Send an interrupt for a particular doorbell on the card. - * @ack_interrupt: Hardware specific operations to ack the h/w on - * receipt of an interrupt. - * @intr_workarounds: Hardware specific workarounds needed after - * handling an interrupt. - * @reset: Reset the remote processor. - * @reset_fw_ready: Reset firmware ready field. - * @is_fw_ready: Check if firmware is ready for OS download. - * @send_firmware_intr: Send an interrupt to the card firmware. - * @load_mic_fw: Load firmware segments required to boot the card - * into card memory. This includes the kernel, command line, ramdisk etc. - * @get_postcode: Get post code status from firmware. - * @dma_filter: DMA filter function to be used. - */ -struct mic_hw_ops { - u8 aper_bar; - u8 mmio_bar; - u32 (*read_spad)(struct mic_device *mdev, unsigned int idx); - void (*write_spad)(struct mic_device *mdev, unsigned int idx, u32 val); - void (*send_intr)(struct mic_device *mdev, int doorbell); - u32 (*ack_interrupt)(struct mic_device *mdev); - void (*intr_workarounds)(struct mic_device *mdev); - void (*reset)(struct mic_device *mdev); - void (*reset_fw_ready)(struct mic_device *mdev); - bool (*is_fw_ready)(struct mic_device *mdev); - void (*send_firmware_intr)(struct mic_device *mdev); - int (*load_mic_fw)(struct mic_device *mdev, const char *buf); - u32 (*get_postcode)(struct mic_device *mdev); - bool (*dma_filter)(struct dma_chan *chan, void *param); -}; - -/** - * mic_mmio_read - read from an MMIO register. - * @mw: MMIO register base virtual address. - * @offset: register offset. - * - * RETURNS: register value. - */ -static inline u32 mic_mmio_read(struct mic_mw *mw, u32 offset) -{ - return ioread32(mw->va + offset); -} - -/** - * mic_mmio_write - write to an MMIO register. - * @mw: MMIO register base virtual address. - * @val: the data value to put into the register - * @offset: register offset. - * - * RETURNS: none. - */ -static inline void -mic_mmio_write(struct mic_mw *mw, u32 val, u32 offset) -{ - iowrite32(val, mw->va + offset); -} - -void mic_bootparam_init(struct mic_device *mdev); -void mic_create_debug_dir(struct mic_device *dev); -void mic_delete_debug_dir(struct mic_device *dev); -void __init mic_init_debugfs(void); -void mic_exit_debugfs(void); -#endif diff --git a/drivers/misc/mic/host/mic_intr.c b/drivers/misc/mic/host/mic_intr.c deleted file mode 100644 index 85b3221b5d40..000000000000 --- a/drivers/misc/mic/host/mic_intr.c +++ /dev/null @@ -1,635 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Intel MIC Host driver. - */ -#include <linux/pci.h> -#include <linux/interrupt.h> - -#include "../common/mic_dev.h" -#include "mic_device.h" - -static irqreturn_t mic_thread_fn(int irq, void *dev) -{ - struct mic_device *mdev = dev; - struct mic_intr_info *intr_info = mdev->intr_info; - struct mic_irq_info *irq_info = &mdev->irq_info; - struct mic_intr_cb *intr_cb; - struct pci_dev *pdev = mdev->pdev; - int i; - - spin_lock(&irq_info->mic_thread_lock); - for (i = intr_info->intr_start_idx[MIC_INTR_DB]; - i < intr_info->intr_len[MIC_INTR_DB]; i++) - if (test_and_clear_bit(i, &irq_info->mask)) { - list_for_each_entry(intr_cb, &irq_info->cb_list[i], - list) - if (intr_cb->thread_fn) - intr_cb->thread_fn(pdev->irq, - intr_cb->data); - } - spin_unlock(&irq_info->mic_thread_lock); - return IRQ_HANDLED; -} -/** - * mic_interrupt - Generic interrupt handler for - * MSI and INTx based interrupts. - * @irq: interrupt to handle (unused) - * @dev: pointer to the mic_device instance - */ -static irqreturn_t mic_interrupt(int irq, void *dev) -{ - struct mic_device *mdev = dev; - struct mic_intr_info *intr_info = mdev->intr_info; - struct mic_irq_info *irq_info = &mdev->irq_info; - struct mic_intr_cb *intr_cb; - struct pci_dev *pdev = mdev->pdev; - u32 mask; - int i; - - mask = mdev->ops->ack_interrupt(mdev); - if (!mask) - return IRQ_NONE; - - spin_lock(&irq_info->mic_intr_lock); - for (i = intr_info->intr_start_idx[MIC_INTR_DB]; - i < intr_info->intr_len[MIC_INTR_DB]; i++) - if (mask & BIT(i)) { - list_for_each_entry(intr_cb, &irq_info->cb_list[i], - list) - if (intr_cb->handler) - intr_cb->handler(pdev->irq, - intr_cb->data); - set_bit(i, &irq_info->mask); - } - spin_unlock(&irq_info->mic_intr_lock); - return IRQ_WAKE_THREAD; -} - -/* Return the interrupt offset from the index. Index is 0 based. */ -static u16 mic_map_src_to_offset(struct mic_device *mdev, - int intr_src, enum mic_intr_type type) -{ - if (type >= MIC_NUM_INTR_TYPES) - return MIC_NUM_OFFSETS; - if (intr_src >= mdev->intr_info->intr_len[type]) - return MIC_NUM_OFFSETS; - - return mdev->intr_info->intr_start_idx[type] + intr_src; -} - -/* Return next available msix_entry. */ -static struct msix_entry *mic_get_available_vector(struct mic_device *mdev) -{ - int i; - struct mic_irq_info *info = &mdev->irq_info; - - for (i = 0; i < info->num_vectors; i++) - if (!info->mic_msi_map[i]) - return &info->msix_entries[i]; - return NULL; -} - -/** - * mic_register_intr_callback - Register a callback handler for the - * given source id. - * - * @mdev: pointer to the mic_device instance - * @idx: The source id to be registered. - * @handler: The function to be called when the source id receives - * the interrupt. - * @thread_fn: thread fn. corresponding to the handler - * @data: Private data of the requester. - * Return the callback structure that was registered or an - * appropriate error on failure. - */ -static struct mic_intr_cb *mic_register_intr_callback(struct mic_device *mdev, - u8 idx, irq_handler_t handler, irq_handler_t thread_fn, - void *data) -{ - struct mic_intr_cb *intr_cb; - unsigned long flags; - int rc; - intr_cb = kmalloc(sizeof(*intr_cb), GFP_KERNEL); - - if (!intr_cb) - return ERR_PTR(-ENOMEM); - - intr_cb->handler = handler; - intr_cb->thread_fn = thread_fn; - intr_cb->data = data; - intr_cb->cb_id = ida_simple_get(&mdev->irq_info.cb_ida, - 0, 0, GFP_KERNEL); - if (intr_cb->cb_id < 0) { - rc = intr_cb->cb_id; - goto ida_fail; - } - - spin_lock(&mdev->irq_info.mic_thread_lock); - spin_lock_irqsave(&mdev->irq_info.mic_intr_lock, flags); - list_add_tail(&intr_cb->list, &mdev->irq_info.cb_list[idx]); - spin_unlock_irqrestore(&mdev->irq_info.mic_intr_lock, flags); - spin_unlock(&mdev->irq_info.mic_thread_lock); - - return intr_cb; -ida_fail: - kfree(intr_cb); - return ERR_PTR(rc); -} - -/** - * mic_unregister_intr_callback - Unregister the callback handler - * identified by its callback id. - * - * @mdev: pointer to the mic_device instance - * @idx: The callback structure id to be unregistered. - * Return the source id that was unregistered or MIC_NUM_OFFSETS if no - * such callback handler was found. - */ -static u8 mic_unregister_intr_callback(struct mic_device *mdev, u32 idx) -{ - struct list_head *pos, *tmp; - struct mic_intr_cb *intr_cb; - unsigned long flags; - int i; - - spin_lock(&mdev->irq_info.mic_thread_lock); - spin_lock_irqsave(&mdev->irq_info.mic_intr_lock, flags); - for (i = 0; i < MIC_NUM_OFFSETS; i++) { - list_for_each_safe(pos, tmp, &mdev->irq_info.cb_list[i]) { - intr_cb = list_entry(pos, struct mic_intr_cb, list); - if (intr_cb->cb_id == idx) { - list_del(pos); - ida_simple_remove(&mdev->irq_info.cb_ida, - intr_cb->cb_id); - kfree(intr_cb); - spin_unlock_irqrestore( - &mdev->irq_info.mic_intr_lock, flags); - spin_unlock(&mdev->irq_info.mic_thread_lock); - return i; - } - } - } - spin_unlock_irqrestore(&mdev->irq_info.mic_intr_lock, flags); - spin_unlock(&mdev->irq_info.mic_thread_lock); - return MIC_NUM_OFFSETS; -} - -/** - * mic_setup_msix - Initializes MSIx interrupts. - * - * @mdev: pointer to mic_device instance - * @pdev: PCI device structure - * - * RETURNS: An appropriate -ERRNO error value on error, or zero for success. - */ -static int mic_setup_msix(struct mic_device *mdev, struct pci_dev *pdev) -{ - int rc, i; - int entry_size = sizeof(*mdev->irq_info.msix_entries); - - mdev->irq_info.msix_entries = kmalloc_array(MIC_MIN_MSIX, - entry_size, GFP_KERNEL); - if (!mdev->irq_info.msix_entries) { - rc = -ENOMEM; - goto err_nomem1; - } - - for (i = 0; i < MIC_MIN_MSIX; i++) - mdev->irq_info.msix_entries[i].entry = i; - - rc = pci_enable_msix_exact(pdev, mdev->irq_info.msix_entries, - MIC_MIN_MSIX); - if (rc) { - dev_dbg(&pdev->dev, "Error enabling MSIx. rc = %d\n", rc); - goto err_enable_msix; - } - - mdev->irq_info.num_vectors = MIC_MIN_MSIX; - mdev->irq_info.mic_msi_map = kzalloc((sizeof(u32) * - mdev->irq_info.num_vectors), GFP_KERNEL); - - if (!mdev->irq_info.mic_msi_map) { - rc = -ENOMEM; - goto err_nomem2; - } - - dev_dbg(&mdev->pdev->dev, - "%d MSIx irqs setup\n", mdev->irq_info.num_vectors); - return 0; -err_nomem2: - pci_disable_msix(pdev); -err_enable_msix: - kfree(mdev->irq_info.msix_entries); -err_nomem1: - mdev->irq_info.num_vectors = 0; - return rc; -} - -/** - * mic_setup_callbacks - Initialize data structures needed - * to handle callbacks. - * - * @mdev: pointer to mic_device instance - */ -static int mic_setup_callbacks(struct mic_device *mdev) -{ - int i; - - mdev->irq_info.cb_list = kmalloc_array(MIC_NUM_OFFSETS, - sizeof(*mdev->irq_info.cb_list), - GFP_KERNEL); - if (!mdev->irq_info.cb_list) - return -ENOMEM; - - for (i = 0; i < MIC_NUM_OFFSETS; i++) - INIT_LIST_HEAD(&mdev->irq_info.cb_list[i]); - ida_init(&mdev->irq_info.cb_ida); - spin_lock_init(&mdev->irq_info.mic_intr_lock); - spin_lock_init(&mdev->irq_info.mic_thread_lock); - return 0; -} - -/** - * mic_release_callbacks - Uninitialize data structures needed - * to handle callbacks. - * - * @mdev: pointer to mic_device instance - */ -static void mic_release_callbacks(struct mic_device *mdev) -{ - unsigned long flags; - struct list_head *pos, *tmp; - struct mic_intr_cb *intr_cb; - int i; - - spin_lock(&mdev->irq_info.mic_thread_lock); - spin_lock_irqsave(&mdev->irq_info.mic_intr_lock, flags); - for (i = 0; i < MIC_NUM_OFFSETS; i++) { - if (list_empty(&mdev->irq_info.cb_list[i])) - break; - - list_for_each_safe(pos, tmp, &mdev->irq_info.cb_list[i]) { - intr_cb = list_entry(pos, struct mic_intr_cb, list); - list_del(pos); - ida_simple_remove(&mdev->irq_info.cb_ida, - intr_cb->cb_id); - kfree(intr_cb); - } - } - spin_unlock_irqrestore(&mdev->irq_info.mic_intr_lock, flags); - spin_unlock(&mdev->irq_info.mic_thread_lock); - ida_destroy(&mdev->irq_info.cb_ida); - kfree(mdev->irq_info.cb_list); -} - -/** - * mic_setup_msi - Initializes MSI interrupts. - * - * @mdev: pointer to mic_device instance - * @pdev: PCI device structure - * - * RETURNS: An appropriate -ERRNO error value on error, or zero for success. - */ -static int mic_setup_msi(struct mic_device *mdev, struct pci_dev *pdev) -{ - int rc; - - rc = pci_enable_msi(pdev); - if (rc) { - dev_dbg(&pdev->dev, "Error enabling MSI. rc = %d\n", rc); - return rc; - } - - mdev->irq_info.num_vectors = 1; - mdev->irq_info.mic_msi_map = kzalloc((sizeof(u32) * - mdev->irq_info.num_vectors), GFP_KERNEL); - - if (!mdev->irq_info.mic_msi_map) { - rc = -ENOMEM; - goto err_nomem1; - } - - rc = mic_setup_callbacks(mdev); - if (rc) { - dev_err(&pdev->dev, "Error setting up callbacks\n"); - goto err_nomem2; - } - - rc = request_threaded_irq(pdev->irq, mic_interrupt, mic_thread_fn, - 0, "mic-msi", mdev); - if (rc) { - dev_err(&pdev->dev, "Error allocating MSI interrupt\n"); - goto err_irq_req_fail; - } - - dev_dbg(&pdev->dev, "%d MSI irqs setup\n", mdev->irq_info.num_vectors); - return 0; -err_irq_req_fail: - mic_release_callbacks(mdev); -err_nomem2: - kfree(mdev->irq_info.mic_msi_map); -err_nomem1: - pci_disable_msi(pdev); - mdev->irq_info.num_vectors = 0; - return rc; -} - -/** - * mic_setup_intx - Initializes legacy interrupts. - * - * @mdev: pointer to mic_device instance - * @pdev: PCI device structure - * - * RETURNS: An appropriate -ERRNO error value on error, or zero for success. - */ -static int mic_setup_intx(struct mic_device *mdev, struct pci_dev *pdev) -{ - int rc; - - /* Enable intx */ - pci_intx(pdev, 1); - rc = mic_setup_callbacks(mdev); - if (rc) { - dev_err(&pdev->dev, "Error setting up callbacks\n"); - goto err_nomem; - } - - rc = request_threaded_irq(pdev->irq, mic_interrupt, mic_thread_fn, - IRQF_SHARED, "mic-intx", mdev); - if (rc) - goto err; - - dev_dbg(&pdev->dev, "intx irq setup\n"); - return 0; -err: - mic_release_callbacks(mdev); -err_nomem: - return rc; -} - -/** - * mic_next_db - Retrieve the next doorbell interrupt source id. - * The id is picked sequentially from the available pool of - * doorlbell ids. - * - * @mdev: pointer to the mic_device instance. - * - * Returns the next doorbell interrupt source. - */ -int mic_next_db(struct mic_device *mdev) -{ - int next_db; - - next_db = mdev->irq_info.next_avail_src % - mdev->intr_info->intr_len[MIC_INTR_DB]; - mdev->irq_info.next_avail_src++; - return next_db; -} - -#define COOKIE_ID_SHIFT 16 -#define GET_ENTRY(cookie) ((cookie) & 0xFFFF) -#define GET_OFFSET(cookie) ((cookie) >> COOKIE_ID_SHIFT) -#define MK_COOKIE(x, y) ((x) | (y) << COOKIE_ID_SHIFT) - -/** - * mic_request_threaded_irq - request an irq. mic_mutex needs - * to be held before calling this function. - * - * @mdev: pointer to mic_device instance - * @handler: The callback function that handles the interrupt. - * The function needs to call ack_interrupts - * (mdev->ops->ack_interrupt(mdev)) when handling the interrupts. - * @thread_fn: thread fn required by request_threaded_irq. - * @name: The ASCII name of the callee requesting the irq. - * @data: private data that is returned back when calling the - * function handler. - * @intr_src: The source id of the requester. Its the doorbell id - * for Doorbell interrupts and DMA channel id for DMA interrupts. - * @type: The type of interrupt. Values defined in mic_intr_type - * - * returns: The cookie that is transparent to the caller. Passed - * back when calling mic_free_irq. An appropriate error code - * is returned on failure. Caller needs to use IS_ERR(return_val) - * to check for failure and PTR_ERR(return_val) to obtained the - * error code. - * - */ -struct mic_irq * -mic_request_threaded_irq(struct mic_device *mdev, - irq_handler_t handler, irq_handler_t thread_fn, - const char *name, void *data, int intr_src, - enum mic_intr_type type) -{ - u16 offset; - int rc = 0; - struct msix_entry *msix = NULL; - unsigned long cookie = 0; - u16 entry; - struct mic_intr_cb *intr_cb; - struct pci_dev *pdev = mdev->pdev; - - offset = mic_map_src_to_offset(mdev, intr_src, type); - if (offset >= MIC_NUM_OFFSETS) { - dev_err(&mdev->pdev->dev, - "Error mapping index %d to a valid source id.\n", - intr_src); - rc = -EINVAL; - goto err; - } - - if (mdev->irq_info.num_vectors > 1) { - msix = mic_get_available_vector(mdev); - if (!msix) { - dev_err(&mdev->pdev->dev, - "No MSIx vectors available for use.\n"); - rc = -ENOSPC; - goto err; - } - - rc = request_threaded_irq(msix->vector, handler, thread_fn, - 0, name, data); - if (rc) { - dev_dbg(&mdev->pdev->dev, - "request irq failed rc = %d\n", rc); - goto err; - } - entry = msix->entry; - mdev->irq_info.mic_msi_map[entry] |= BIT(offset); - mdev->intr_ops->program_msi_to_src_map(mdev, - entry, offset, true); - cookie = MK_COOKIE(entry, offset); - dev_dbg(&mdev->pdev->dev, "irq: %d assigned for src: %d\n", - msix->vector, intr_src); - } else { - intr_cb = mic_register_intr_callback(mdev, offset, handler, - thread_fn, data); - if (IS_ERR(intr_cb)) { - dev_err(&mdev->pdev->dev, - "No available callback entries for use\n"); - rc = PTR_ERR(intr_cb); - goto err; - } - - entry = 0; - if (pci_dev_msi_enabled(pdev)) { - mdev->irq_info.mic_msi_map[entry] |= (1 << offset); - mdev->intr_ops->program_msi_to_src_map(mdev, - entry, offset, true); - } - cookie = MK_COOKIE(entry, intr_cb->cb_id); - dev_dbg(&mdev->pdev->dev, "callback %d registered for src: %d\n", - intr_cb->cb_id, intr_src); - } - return (struct mic_irq *)cookie; -err: - return ERR_PTR(rc); -} - -/** - * mic_free_irq - free irq. mic_mutex - * needs to be held before calling this function. - * - * @mdev: pointer to mic_device instance - * @cookie: cookie obtained during a successful call to mic_request_threaded_irq - * @data: private data specified by the calling function during the - * mic_request_threaded_irq - * - * returns: none. - */ -void mic_free_irq(struct mic_device *mdev, - struct mic_irq *cookie, void *data) -{ - u32 offset; - u32 entry; - u8 src_id; - unsigned int irq; - struct pci_dev *pdev = mdev->pdev; - - entry = GET_ENTRY((unsigned long)cookie); - offset = GET_OFFSET((unsigned long)cookie); - if (mdev->irq_info.num_vectors > 1) { - if (entry >= mdev->irq_info.num_vectors) { - dev_warn(&mdev->pdev->dev, - "entry %d should be < num_irq %d\n", - entry, mdev->irq_info.num_vectors); - return; - } - irq = mdev->irq_info.msix_entries[entry].vector; - free_irq(irq, data); - mdev->irq_info.mic_msi_map[entry] &= ~(BIT(offset)); - mdev->intr_ops->program_msi_to_src_map(mdev, - entry, offset, false); - - dev_dbg(&mdev->pdev->dev, "irq: %d freed\n", irq); - } else { - irq = pdev->irq; - src_id = mic_unregister_intr_callback(mdev, offset); - if (src_id >= MIC_NUM_OFFSETS) { - dev_warn(&mdev->pdev->dev, "Error unregistering callback\n"); - return; - } - if (pci_dev_msi_enabled(pdev)) { - mdev->irq_info.mic_msi_map[entry] &= ~(BIT(src_id)); - mdev->intr_ops->program_msi_to_src_map(mdev, - entry, src_id, false); - } - dev_dbg(&mdev->pdev->dev, "callback %d unregistered for src: %d\n", - offset, src_id); - } -} - -/** - * mic_setup_interrupts - Initializes interrupts. - * - * @mdev: pointer to mic_device instance - * @pdev: PCI device structure - * - * RETURNS: An appropriate -ERRNO error value on error, or zero for success. - */ -int mic_setup_interrupts(struct mic_device *mdev, struct pci_dev *pdev) -{ - int rc; - - rc = mic_setup_msix(mdev, pdev); - if (!rc) - goto done; - - rc = mic_setup_msi(mdev, pdev); - if (!rc) - goto done; - - rc = mic_setup_intx(mdev, pdev); - if (rc) { - dev_err(&mdev->pdev->dev, "no usable interrupts\n"); - return rc; - } -done: - mdev->intr_ops->enable_interrupts(mdev); - return 0; -} - -/** - * mic_free_interrupts - Frees interrupts setup by mic_setup_interrupts - * - * @mdev: pointer to mic_device instance - * @pdev: PCI device structure - * - * returns none. - */ -void mic_free_interrupts(struct mic_device *mdev, struct pci_dev *pdev) -{ - int i; - - mdev->intr_ops->disable_interrupts(mdev); - if (mdev->irq_info.num_vectors > 1) { - for (i = 0; i < mdev->irq_info.num_vectors; i++) { - if (mdev->irq_info.mic_msi_map[i]) - dev_warn(&pdev->dev, "irq %d may still be in use.\n", - mdev->irq_info.msix_entries[i].vector); - } - kfree(mdev->irq_info.mic_msi_map); - kfree(mdev->irq_info.msix_entries); - pci_disable_msix(pdev); - } else { - if (pci_dev_msi_enabled(pdev)) { - free_irq(pdev->irq, mdev); - kfree(mdev->irq_info.mic_msi_map); - pci_disable_msi(pdev); - } else { - free_irq(pdev->irq, mdev); - } - mic_release_callbacks(mdev); - } -} - -/** - * mic_intr_restore - Restore MIC interrupt registers. - * - * @mdev: pointer to mic_device instance. - * - * Restore the interrupt registers to values previously - * stored in the SW data structures. mic_mutex needs to - * be held before calling this function. - * - * returns None. - */ -void mic_intr_restore(struct mic_device *mdev) -{ - int entry, offset; - struct pci_dev *pdev = mdev->pdev; - - if (!pci_dev_msi_enabled(pdev)) - return; - - for (entry = 0; entry < mdev->irq_info.num_vectors; entry++) { - for (offset = 0; offset < MIC_NUM_OFFSETS; offset++) { - if (mdev->irq_info.mic_msi_map[entry] & BIT(offset)) - mdev->intr_ops->program_msi_to_src_map(mdev, - entry, offset, true); - } - } -} diff --git a/drivers/misc/mic/host/mic_intr.h b/drivers/misc/mic/host/mic_intr.h deleted file mode 100644 index b14ba818006f..000000000000 --- a/drivers/misc/mic/host/mic_intr.h +++ /dev/null @@ -1,137 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Intel MIC Host driver. - */ -#ifndef _MIC_INTR_H_ -#define _MIC_INTR_H_ - -#include <linux/bitops.h> -#include <linux/interrupt.h> -/* - * The minimum number of msix vectors required for normal operation. - * 3 for virtio network, console and block devices. - * 1 for card shutdown notifications. - * 4 for host owned DMA channels. - * 1 for SCIF - */ -#define MIC_MIN_MSIX 9 -#define MIC_NUM_OFFSETS 32 - -/** - * mic_intr_source - The type of source that will generate - * the interrupt.The number of types needs to be in sync with - * MIC_NUM_INTR_TYPES - * - * MIC_INTR_DB: The source is a doorbell - * MIC_INTR_DMA: The source is a DMA channel - * MIC_INTR_ERR: The source is an error interrupt e.g. SBOX ERR - * MIC_NUM_INTR_TYPES: Total number of interrupt sources. - */ -enum mic_intr_type { - MIC_INTR_DB = 0, - MIC_INTR_DMA, - MIC_INTR_ERR, - MIC_NUM_INTR_TYPES -}; - -/** - * struct mic_intr_info - Contains h/w specific interrupt sources - * information. - * - * @intr_start_idx: Contains the starting indexes of the - * interrupt types. - * @intr_len: Contains the length of the interrupt types. - */ -struct mic_intr_info { - u16 intr_start_idx[MIC_NUM_INTR_TYPES]; - u16 intr_len[MIC_NUM_INTR_TYPES]; -}; - -/** - * struct mic_irq_info - OS specific irq information - * - * @next_avail_src: next available doorbell that can be assigned. - * @msix_entries: msix entries allocated while setting up MSI-x - * @mic_msi_map: The MSI/MSI-x mapping information. - * @num_vectors: The number of MSI/MSI-x vectors that have been allocated. - * @cb_ida: callback ID allocator to track the callbacks registered. - * @mic_intr_lock: spinlock to protect the interrupt callback list. - * @mic_thread_lock: spinlock to protect the thread callback list. - * This lock is used to protect against thread_fn while - * mic_intr_lock is used to protect against interrupt handler. - * @cb_list: Array of callback lists one for each source. - * @mask: Mask used by the main thread fn to call the underlying thread fns. - */ -struct mic_irq_info { - int next_avail_src; - struct msix_entry *msix_entries; - u32 *mic_msi_map; - u16 num_vectors; - struct ida cb_ida; - spinlock_t mic_intr_lock; - spinlock_t mic_thread_lock; - struct list_head *cb_list; - unsigned long mask; -}; - -/** - * struct mic_intr_cb - Interrupt callback structure. - * - * @handler: The callback function - * @thread_fn: The thread_fn. - * @data: Private data of the requester. - * @cb_id: The callback id. Identifies this callback. - * @list: list head pointing to the next callback structure. - */ -struct mic_intr_cb { - irq_handler_t handler; - irq_handler_t thread_fn; - void *data; - int cb_id; - struct list_head list; -}; - -/** - * struct mic_irq - opaque pointer used as cookie - */ -struct mic_irq; - -/* Forward declaration */ -struct mic_device; - -/** - * struct mic_hw_intr_ops: MIC HW specific interrupt operations - * @intr_init: Initialize H/W specific interrupt information. - * @enable_interrupts: Enable interrupts from the hardware. - * @disable_interrupts: Disable interrupts from the hardware. - * @program_msi_to_src_map: Update MSI mapping registers with - * irq information. - * @read_msi_to_src_map: Read MSI mapping registers containing - * irq information. - */ -struct mic_hw_intr_ops { - void (*intr_init)(struct mic_device *mdev); - void (*enable_interrupts)(struct mic_device *mdev); - void (*disable_interrupts)(struct mic_device *mdev); - void (*program_msi_to_src_map) (struct mic_device *mdev, - int idx, int intr_src, bool set); - u32 (*read_msi_to_src_map) (struct mic_device *mdev, - int idx); -}; - -int mic_next_db(struct mic_device *mdev); -struct mic_irq * -mic_request_threaded_irq(struct mic_device *mdev, - irq_handler_t handler, irq_handler_t thread_fn, - const char *name, void *data, int intr_src, - enum mic_intr_type type); -void mic_free_irq(struct mic_device *mdev, - struct mic_irq *cookie, void *data); -int mic_setup_interrupts(struct mic_device *mdev, struct pci_dev *pdev); -void mic_free_interrupts(struct mic_device *mdev, struct pci_dev *pdev); -void mic_intr_restore(struct mic_device *mdev); -#endif diff --git a/drivers/misc/mic/host/mic_main.c b/drivers/misc/mic/host/mic_main.c deleted file mode 100644 index ea4608527ea0..000000000000 --- a/drivers/misc/mic/host/mic_main.c +++ /dev/null @@ -1,335 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Intel MIC Host driver. - */ -#include <linux/fs.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/poll.h> - -#include <linux/mic_common.h> -#include "../common/mic_dev.h" -#include "mic_device.h" -#include "mic_x100.h" -#include "mic_smpt.h" - -static const char mic_driver_name[] = "mic"; - -static const struct pci_device_id mic_pci_tbl[] = { - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2250)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2251)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2252)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2253)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2254)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2255)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2256)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2257)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2258)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_2259)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_225a)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_225b)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_225c)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_225d)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MIC_X100_PCI_DEVICE_225e)}, - - /* required last entry */ - { 0, } -}; - -MODULE_DEVICE_TABLE(pci, mic_pci_tbl); - -/* ID allocator for MIC devices */ -static struct ida g_mic_ida; - -/* Initialize the device page */ -static int mic_dp_init(struct mic_device *mdev) -{ - mdev->dp = kzalloc(MIC_DP_SIZE, GFP_KERNEL); - if (!mdev->dp) - return -ENOMEM; - - mdev->dp_dma_addr = mic_map_single(mdev, - mdev->dp, MIC_DP_SIZE); - if (mic_map_error(mdev->dp_dma_addr)) { - kfree(mdev->dp); - dev_err(&mdev->pdev->dev, "%s %d err %d\n", - __func__, __LINE__, -ENOMEM); - return -ENOMEM; - } - mdev->ops->write_spad(mdev, MIC_DPLO_SPAD, mdev->dp_dma_addr); - mdev->ops->write_spad(mdev, MIC_DPHI_SPAD, mdev->dp_dma_addr >> 32); - return 0; -} - -/* Uninitialize the device page */ -static void mic_dp_uninit(struct mic_device *mdev) -{ - mic_unmap_single(mdev, mdev->dp_dma_addr, MIC_DP_SIZE); - kfree(mdev->dp); -} - -/** - * mic_ops_init: Initialize HW specific operation tables. - * - * @mdev: pointer to mic_device instance - * - * returns none. - */ -static void mic_ops_init(struct mic_device *mdev) -{ - switch (mdev->family) { - case MIC_FAMILY_X100: - mdev->ops = &mic_x100_ops; - mdev->intr_ops = &mic_x100_intr_ops; - mdev->smpt_ops = &mic_x100_smpt_ops; - break; - default: - break; - } -} - -/** - * mic_get_family - Determine hardware family to which this MIC belongs. - * - * @pdev: The pci device structure - * - * returns family. - */ -static enum mic_hw_family mic_get_family(struct pci_dev *pdev) -{ - enum mic_hw_family family; - - switch (pdev->device) { - case MIC_X100_PCI_DEVICE_2250: - case MIC_X100_PCI_DEVICE_2251: - case MIC_X100_PCI_DEVICE_2252: - case MIC_X100_PCI_DEVICE_2253: - case MIC_X100_PCI_DEVICE_2254: - case MIC_X100_PCI_DEVICE_2255: - case MIC_X100_PCI_DEVICE_2256: - case MIC_X100_PCI_DEVICE_2257: - case MIC_X100_PCI_DEVICE_2258: - case MIC_X100_PCI_DEVICE_2259: - case MIC_X100_PCI_DEVICE_225a: - case MIC_X100_PCI_DEVICE_225b: - case MIC_X100_PCI_DEVICE_225c: - case MIC_X100_PCI_DEVICE_225d: - case MIC_X100_PCI_DEVICE_225e: - family = MIC_FAMILY_X100; - break; - default: - family = MIC_FAMILY_UNKNOWN; - break; - } - return family; -} - -/** - * mic_device_init - Allocates and initializes the MIC device structure - * - * @mdev: pointer to mic_device instance - * @pdev: The pci device structure - * - * returns none. - */ -static void -mic_device_init(struct mic_device *mdev, struct pci_dev *pdev) -{ - mdev->pdev = pdev; - mdev->family = mic_get_family(pdev); - mdev->stepping = pdev->revision; - mic_ops_init(mdev); - mutex_init(&mdev->mic_mutex); - mdev->irq_info.next_avail_src = 0; -} - -/** - * mic_probe - Device Initialization Routine - * - * @pdev: PCI device structure - * @ent: entry in mic_pci_tbl - * - * returns 0 on success, < 0 on failure. - */ -static int mic_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - int rc; - struct mic_device *mdev; - - mdev = kzalloc(sizeof(*mdev), GFP_KERNEL); - if (!mdev) { - rc = -ENOMEM; - goto mdev_alloc_fail; - } - mdev->id = ida_simple_get(&g_mic_ida, 0, MIC_MAX_NUM_DEVS, GFP_KERNEL); - if (mdev->id < 0) { - rc = mdev->id; - dev_err(&pdev->dev, "ida_simple_get failed rc %d\n", rc); - goto ida_fail; - } - - mic_device_init(mdev, pdev); - - rc = pci_enable_device(pdev); - if (rc) { - dev_err(&pdev->dev, "failed to enable pci device.\n"); - goto ida_remove; - } - - pci_set_master(pdev); - - rc = pci_request_regions(pdev, mic_driver_name); - if (rc) { - dev_err(&pdev->dev, "failed to get pci regions.\n"); - goto disable_device; - } - - rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); - if (rc) { - dev_err(&pdev->dev, "Cannot set DMA mask\n"); - goto release_regions; - } - - mdev->mmio.pa = pci_resource_start(pdev, mdev->ops->mmio_bar); - mdev->mmio.len = pci_resource_len(pdev, mdev->ops->mmio_bar); - mdev->mmio.va = pci_ioremap_bar(pdev, mdev->ops->mmio_bar); - if (!mdev->mmio.va) { - dev_err(&pdev->dev, "Cannot remap MMIO BAR\n"); - rc = -EIO; - goto release_regions; - } - - mdev->aper.pa = pci_resource_start(pdev, mdev->ops->aper_bar); - mdev->aper.len = pci_resource_len(pdev, mdev->ops->aper_bar); - mdev->aper.va = ioremap_wc(mdev->aper.pa, mdev->aper.len); - if (!mdev->aper.va) { - dev_err(&pdev->dev, "Cannot remap Aperture BAR\n"); - rc = -EIO; - goto unmap_mmio; - } - - mdev->intr_ops->intr_init(mdev); - rc = mic_setup_interrupts(mdev, pdev); - if (rc) { - dev_err(&pdev->dev, "mic_setup_interrupts failed %d\n", rc); - goto unmap_aper; - } - rc = mic_smpt_init(mdev); - if (rc) { - dev_err(&pdev->dev, "smpt_init failed %d\n", rc); - goto free_interrupts; - } - - pci_set_drvdata(pdev, mdev); - - rc = mic_dp_init(mdev); - if (rc) { - dev_err(&pdev->dev, "mic_dp_init failed rc %d\n", rc); - goto smpt_uninit; - } - mic_bootparam_init(mdev); - mic_create_debug_dir(mdev); - - mdev->cosm_dev = cosm_register_device(&mdev->pdev->dev, &cosm_hw_ops); - if (IS_ERR(mdev->cosm_dev)) { - rc = PTR_ERR(mdev->cosm_dev); - dev_err(&pdev->dev, "cosm_add_device failed rc %d\n", rc); - goto cleanup_debug_dir; - } - return 0; -cleanup_debug_dir: - mic_delete_debug_dir(mdev); - mic_dp_uninit(mdev); -smpt_uninit: - mic_smpt_uninit(mdev); -free_interrupts: - mic_free_interrupts(mdev, pdev); -unmap_aper: - iounmap(mdev->aper.va); -unmap_mmio: - iounmap(mdev->mmio.va); -release_regions: - pci_release_regions(pdev); -disable_device: - pci_disable_device(pdev); -ida_remove: - ida_simple_remove(&g_mic_ida, mdev->id); -ida_fail: - kfree(mdev); -mdev_alloc_fail: - dev_err(&pdev->dev, "Probe failed rc %d\n", rc); - return rc; -} - -/** - * mic_remove - Device Removal Routine - * mic_remove is called by the PCI subsystem to alert the driver - * that it should release a PCI device. - * - * @pdev: PCI device structure - */ -static void mic_remove(struct pci_dev *pdev) -{ - struct mic_device *mdev; - - mdev = pci_get_drvdata(pdev); - if (!mdev) - return; - - cosm_unregister_device(mdev->cosm_dev); - mic_delete_debug_dir(mdev); - mic_dp_uninit(mdev); - mic_smpt_uninit(mdev); - mic_free_interrupts(mdev, pdev); - iounmap(mdev->aper.va); - iounmap(mdev->mmio.va); - pci_release_regions(pdev); - pci_disable_device(pdev); - ida_simple_remove(&g_mic_ida, mdev->id); - kfree(mdev); -} - -static struct pci_driver mic_driver = { - .name = mic_driver_name, - .id_table = mic_pci_tbl, - .probe = mic_probe, - .remove = mic_remove -}; - -static int __init mic_init(void) -{ - int ret; - - request_module("mic_x100_dma"); - mic_init_debugfs(); - ida_init(&g_mic_ida); - ret = pci_register_driver(&mic_driver); - if (ret) { - pr_err("pci_register_driver failed ret %d\n", ret); - goto cleanup_debugfs; - } - return 0; -cleanup_debugfs: - ida_destroy(&g_mic_ida); - mic_exit_debugfs(); - return ret; -} - -static void __exit mic_exit(void) -{ - pci_unregister_driver(&mic_driver); - ida_destroy(&g_mic_ida); - mic_exit_debugfs(); -} - -module_init(mic_init); -module_exit(mic_exit); - -MODULE_AUTHOR("Intel Corporation"); -MODULE_DESCRIPTION("Intel(R) MIC X100 Host driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/mic/host/mic_smpt.c b/drivers/misc/mic/host/mic_smpt.c deleted file mode 100644 index 50d1bebecd54..000000000000 --- a/drivers/misc/mic/host/mic_smpt.c +++ /dev/null @@ -1,427 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Intel MIC Host driver. - */ -#include <linux/pci.h> - -#include "../common/mic_dev.h" -#include "mic_device.h" -#include "mic_smpt.h" - -static inline u64 mic_system_page_mask(struct mic_device *mdev) -{ - return (1ULL << mdev->smpt->info.page_shift) - 1ULL; -} - -static inline u8 mic_sys_addr_to_smpt(struct mic_device *mdev, dma_addr_t pa) -{ - return (pa - mdev->smpt->info.base) >> mdev->smpt->info.page_shift; -} - -static inline u64 mic_smpt_to_pa(struct mic_device *mdev, u8 index) -{ - return mdev->smpt->info.base + (index * mdev->smpt->info.page_size); -} - -static inline u64 mic_smpt_offset(struct mic_device *mdev, dma_addr_t pa) -{ - return pa & mic_system_page_mask(mdev); -} - -static inline u64 mic_smpt_align_low(struct mic_device *mdev, dma_addr_t pa) -{ - return ALIGN(pa - mic_system_page_mask(mdev), - mdev->smpt->info.page_size); -} - -static inline u64 mic_smpt_align_high(struct mic_device *mdev, dma_addr_t pa) -{ - return ALIGN(pa, mdev->smpt->info.page_size); -} - -/* Total Cumulative system memory accessible by MIC across all SMPT entries */ -static inline u64 mic_max_system_memory(struct mic_device *mdev) -{ - return mdev->smpt->info.num_reg * mdev->smpt->info.page_size; -} - -/* Maximum system memory address accessible by MIC */ -static inline u64 mic_max_system_addr(struct mic_device *mdev) -{ - return mdev->smpt->info.base + mic_max_system_memory(mdev) - 1ULL; -} - -/* Check if the DMA address is a MIC system memory address */ -static inline bool -mic_is_system_addr(struct mic_device *mdev, dma_addr_t pa) -{ - return pa >= mdev->smpt->info.base && pa <= mic_max_system_addr(mdev); -} - -/* Populate an SMPT entry and update the reference counts. */ -static void mic_add_smpt_entry(int spt, s64 *ref, u64 addr, - int entries, struct mic_device *mdev) -{ - struct mic_smpt_info *smpt_info = mdev->smpt; - int i; - - for (i = spt; i < spt + entries; i++, - addr += smpt_info->info.page_size) { - if (!smpt_info->entry[i].ref_count && - (smpt_info->entry[i].dma_addr != addr)) { - mdev->smpt_ops->set(mdev, addr, i); - smpt_info->entry[i].dma_addr = addr; - } - smpt_info->entry[i].ref_count += ref[i - spt]; - } -} - -/* - * Find an available MIC address in MIC SMPT address space - * for a given DMA address and size. - */ -static dma_addr_t mic_smpt_op(struct mic_device *mdev, u64 dma_addr, - int entries, s64 *ref, size_t size) -{ - int spt; - int ae = 0; - int i; - unsigned long flags; - dma_addr_t mic_addr = 0; - dma_addr_t addr = dma_addr; - struct mic_smpt_info *smpt_info = mdev->smpt; - - spin_lock_irqsave(&smpt_info->smpt_lock, flags); - - /* find existing entries */ - for (i = 0; i < smpt_info->info.num_reg; i++) { - if (smpt_info->entry[i].dma_addr == addr) { - ae++; - addr += smpt_info->info.page_size; - } else if (ae) /* cannot find contiguous entries */ - goto not_found; - - if (ae == entries) - goto found; - } - - /* find free entry */ - for (ae = 0, i = 0; i < smpt_info->info.num_reg; i++) { - ae = (smpt_info->entry[i].ref_count == 0) ? ae + 1 : 0; - if (ae == entries) - goto found; - } - -not_found: - spin_unlock_irqrestore(&smpt_info->smpt_lock, flags); - return mic_addr; - -found: - spt = i - entries + 1; - mic_addr = mic_smpt_to_pa(mdev, spt); - mic_add_smpt_entry(spt, ref, dma_addr, entries, mdev); - smpt_info->map_count++; - smpt_info->ref_count += (s64)size; - spin_unlock_irqrestore(&smpt_info->smpt_lock, flags); - return mic_addr; -} - -/* - * Returns number of smpt entries needed for dma_addr to dma_addr + size - * also returns the reference count array for each of those entries - * and the starting smpt address - */ -static int mic_get_smpt_ref_count(struct mic_device *mdev, dma_addr_t dma_addr, - size_t size, s64 *ref, u64 *smpt_start) -{ - u64 start = dma_addr; - u64 end = dma_addr + size; - int i = 0; - - while (start < end) { - ref[i++] = min(mic_smpt_align_high(mdev, start + 1), - end) - start; - start = mic_smpt_align_high(mdev, start + 1); - } - - if (smpt_start) - *smpt_start = mic_smpt_align_low(mdev, dma_addr); - - return i; -} - -/* - * mic_to_dma_addr - Converts a MIC address to a DMA address. - * - * @mdev: pointer to mic_device instance. - * @mic_addr: MIC address. - * - * returns a DMA address. - */ -dma_addr_t mic_to_dma_addr(struct mic_device *mdev, dma_addr_t mic_addr) -{ - struct mic_smpt_info *smpt_info = mdev->smpt; - int spt; - dma_addr_t dma_addr; - - if (!mic_is_system_addr(mdev, mic_addr)) { - dev_err(&mdev->pdev->dev, - "mic_addr is invalid. mic_addr = 0x%llx\n", mic_addr); - return -EINVAL; - } - spt = mic_sys_addr_to_smpt(mdev, mic_addr); - dma_addr = smpt_info->entry[spt].dma_addr + - mic_smpt_offset(mdev, mic_addr); - return dma_addr; -} - -/** - * mic_map - Maps a DMA address to a MIC physical address. - * - * @mdev: pointer to mic_device instance. - * @dma_addr: DMA address. - * @size: Size of the region to be mapped. - * - * This API converts the DMA address provided to a DMA address understood - * by MIC. Caller should check for errors by calling mic_map_error(..). - * - * returns DMA address as required by MIC. - */ -dma_addr_t mic_map(struct mic_device *mdev, dma_addr_t dma_addr, size_t size) -{ - dma_addr_t mic_addr = 0; - int num_entries; - s64 *ref; - u64 smpt_start; - - if (!size || size > mic_max_system_memory(mdev)) - return mic_addr; - - ref = kmalloc_array(mdev->smpt->info.num_reg, sizeof(s64), GFP_ATOMIC); - if (!ref) - return mic_addr; - - num_entries = mic_get_smpt_ref_count(mdev, dma_addr, size, - ref, &smpt_start); - - /* Set the smpt table appropriately and get 16G aligned mic address */ - mic_addr = mic_smpt_op(mdev, smpt_start, num_entries, ref, size); - - kfree(ref); - - /* - * If mic_addr is zero then its an error case - * since mic_addr can never be zero. - * else generate mic_addr by adding the 16G offset in dma_addr - */ - if (!mic_addr && MIC_FAMILY_X100 == mdev->family) { - dev_err(&mdev->pdev->dev, - "mic_map failed dma_addr 0x%llx size 0x%lx\n", - dma_addr, size); - return mic_addr; - } else { - return mic_addr + mic_smpt_offset(mdev, dma_addr); - } -} - -/** - * mic_unmap - Unmaps a MIC physical address. - * - * @mdev: pointer to mic_device instance. - * @mic_addr: MIC physical address. - * @size: Size of the region to be unmapped. - * - * This API unmaps the mappings created by mic_map(..). - * - * returns None. - */ -void mic_unmap(struct mic_device *mdev, dma_addr_t mic_addr, size_t size) -{ - struct mic_smpt_info *smpt_info = mdev->smpt; - s64 *ref; - int num_smpt; - int spt; - int i; - unsigned long flags; - - if (!size) - return; - - if (!mic_is_system_addr(mdev, mic_addr)) { - dev_err(&mdev->pdev->dev, - "invalid address: 0x%llx\n", mic_addr); - return; - } - - spt = mic_sys_addr_to_smpt(mdev, mic_addr); - ref = kmalloc_array(mdev->smpt->info.num_reg, sizeof(s64), GFP_ATOMIC); - if (!ref) - return; - - /* Get number of smpt entries to be mapped, ref count array */ - num_smpt = mic_get_smpt_ref_count(mdev, mic_addr, size, ref, NULL); - - spin_lock_irqsave(&smpt_info->smpt_lock, flags); - smpt_info->unmap_count++; - smpt_info->ref_count -= (s64)size; - - for (i = spt; i < spt + num_smpt; i++) { - smpt_info->entry[i].ref_count -= ref[i - spt]; - if (smpt_info->entry[i].ref_count < 0) - dev_warn(&mdev->pdev->dev, - "ref count for entry %d is negative\n", i); - } - spin_unlock_irqrestore(&smpt_info->smpt_lock, flags); - kfree(ref); -} - -/** - * mic_map_single - Maps a virtual address to a MIC physical address. - * - * @mdev: pointer to mic_device instance. - * @va: Kernel direct mapped virtual address. - * @size: Size of the region to be mapped. - * - * This API calls pci_map_single(..) for the direct mapped virtual address - * and then converts the DMA address provided to a DMA address understood - * by MIC. Caller should check for errors by calling mic_map_error(..). - * - * returns DMA address as required by MIC. - */ -dma_addr_t mic_map_single(struct mic_device *mdev, void *va, size_t size) -{ - dma_addr_t mic_addr = 0; - struct pci_dev *pdev = mdev->pdev; - dma_addr_t dma_addr = - pci_map_single(pdev, va, size, PCI_DMA_BIDIRECTIONAL); - - if (!pci_dma_mapping_error(pdev, dma_addr)) { - mic_addr = mic_map(mdev, dma_addr, size); - if (!mic_addr) { - dev_err(&mdev->pdev->dev, - "mic_map failed dma_addr 0x%llx size 0x%lx\n", - dma_addr, size); - pci_unmap_single(pdev, dma_addr, - size, PCI_DMA_BIDIRECTIONAL); - } - } - return mic_addr; -} - -/** - * mic_unmap_single - Unmaps a MIC physical address. - * - * @mdev: pointer to mic_device instance. - * @mic_addr: MIC physical address. - * @size: Size of the region to be unmapped. - * - * This API unmaps the mappings created by mic_map_single(..). - * - * returns None. - */ -void -mic_unmap_single(struct mic_device *mdev, dma_addr_t mic_addr, size_t size) -{ - struct pci_dev *pdev = mdev->pdev; - dma_addr_t dma_addr = mic_to_dma_addr(mdev, mic_addr); - mic_unmap(mdev, mic_addr, size); - pci_unmap_single(pdev, dma_addr, size, PCI_DMA_BIDIRECTIONAL); -} - -/** - * mic_smpt_init - Initialize MIC System Memory Page Tables. - * - * @mdev: pointer to mic_device instance. - * - * returns 0 for success and -errno for error. - */ -int mic_smpt_init(struct mic_device *mdev) -{ - int i, err = 0; - dma_addr_t dma_addr; - struct mic_smpt_info *smpt_info; - - mdev->smpt = kmalloc(sizeof(*mdev->smpt), GFP_KERNEL); - if (!mdev->smpt) - return -ENOMEM; - - smpt_info = mdev->smpt; - mdev->smpt_ops->init(mdev); - smpt_info->entry = kmalloc_array(smpt_info->info.num_reg, - sizeof(*smpt_info->entry), GFP_KERNEL); - if (!smpt_info->entry) { - err = -ENOMEM; - goto free_smpt; - } - spin_lock_init(&smpt_info->smpt_lock); - for (i = 0; i < smpt_info->info.num_reg; i++) { - dma_addr = i * smpt_info->info.page_size; - smpt_info->entry[i].dma_addr = dma_addr; - smpt_info->entry[i].ref_count = 0; - mdev->smpt_ops->set(mdev, dma_addr, i); - } - smpt_info->ref_count = 0; - smpt_info->map_count = 0; - smpt_info->unmap_count = 0; - return 0; -free_smpt: - kfree(smpt_info); - return err; -} - -/** - * mic_smpt_uninit - UnInitialize MIC System Memory Page Tables. - * - * @mdev: pointer to mic_device instance. - * - * returns None. - */ -void mic_smpt_uninit(struct mic_device *mdev) -{ - struct mic_smpt_info *smpt_info = mdev->smpt; - int i; - - dev_dbg(&mdev->pdev->dev, - "nodeid %d SMPT ref count %lld map %lld unmap %lld\n", - mdev->id, smpt_info->ref_count, - smpt_info->map_count, smpt_info->unmap_count); - - for (i = 0; i < smpt_info->info.num_reg; i++) { - dev_dbg(&mdev->pdev->dev, - "SMPT entry[%d] dma_addr = 0x%llx ref_count = %lld\n", - i, smpt_info->entry[i].dma_addr, - smpt_info->entry[i].ref_count); - if (smpt_info->entry[i].ref_count) - dev_warn(&mdev->pdev->dev, - "ref count for entry %d is not zero\n", i); - } - kfree(smpt_info->entry); - kfree(smpt_info); -} - -/** - * mic_smpt_restore - Restore MIC System Memory Page Tables. - * - * @mdev: pointer to mic_device instance. - * - * Restore the SMPT registers to values previously stored in the - * SW data structures. Some MIC steppings lose register state - * across resets and this API should be called for performing - * a restore operation if required. - * - * returns None. - */ -void mic_smpt_restore(struct mic_device *mdev) -{ - int i; - dma_addr_t dma_addr; - - for (i = 0; i < mdev->smpt->info.num_reg; i++) { - dma_addr = mdev->smpt->entry[i].dma_addr; - mdev->smpt_ops->set(mdev, dma_addr, i); - } -} diff --git a/drivers/misc/mic/host/mic_smpt.h b/drivers/misc/mic/host/mic_smpt.h deleted file mode 100644 index 3b1ec14a9d81..000000000000 --- a/drivers/misc/mic/host/mic_smpt.h +++ /dev/null @@ -1,87 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Intel MIC Host driver. - */ -#ifndef MIC_SMPT_H -#define MIC_SMPT_H -/** - * struct mic_smpt_ops - MIC HW specific SMPT operations. - * @init: Initialize hardware specific SMPT information in mic_smpt_hw_info. - * @set: Set the value for a particular SMPT entry. - */ -struct mic_smpt_ops { - void (*init)(struct mic_device *mdev); - void (*set)(struct mic_device *mdev, dma_addr_t dma_addr, u8 index); -}; - -/** - * struct mic_smpt - MIC SMPT entry information. - * @dma_addr: Base DMA address for this SMPT entry. - * @ref_count: Number of active mappings for this SMPT entry in bytes. - */ -struct mic_smpt { - dma_addr_t dma_addr; - s64 ref_count; -}; - -/** - * struct mic_smpt_hw_info - MIC SMPT hardware specific information. - * @num_reg: Number of SMPT registers. - * @page_shift: System memory page shift. - * @page_size: System memory page size. - * @base: System address base. - */ -struct mic_smpt_hw_info { - u8 num_reg; - u8 page_shift; - u64 page_size; - u64 base; -}; - -/** - * struct mic_smpt_info - MIC SMPT information. - * @entry: Array of SMPT entries. - * @smpt_lock: Spin lock protecting access to SMPT data structures. - * @info: Hardware specific SMPT information. - * @ref_count: Number of active SMPT mappings (for debug). - * @map_count: Number of SMPT mappings created (for debug). - * @unmap_count: Number of SMPT mappings destroyed (for debug). - */ -struct mic_smpt_info { - struct mic_smpt *entry; - spinlock_t smpt_lock; - struct mic_smpt_hw_info info; - s64 ref_count; - s64 map_count; - s64 unmap_count; -}; - -dma_addr_t mic_map_single(struct mic_device *mdev, void *va, size_t size); -void mic_unmap_single(struct mic_device *mdev, - dma_addr_t mic_addr, size_t size); -dma_addr_t mic_map(struct mic_device *mdev, - dma_addr_t dma_addr, size_t size); -void mic_unmap(struct mic_device *mdev, dma_addr_t mic_addr, size_t size); -dma_addr_t mic_to_dma_addr(struct mic_device *mdev, dma_addr_t mic_addr); - -/** - * mic_map_error - Check a MIC address for errors. - * - * @mdev: pointer to mic_device instance. - * - * returns Whether there was an error during mic_map..(..) APIs. - */ -static inline bool mic_map_error(dma_addr_t mic_addr) -{ - return !mic_addr; -} - -int mic_smpt_init(struct mic_device *mdev); -void mic_smpt_uninit(struct mic_device *mdev); -void mic_smpt_restore(struct mic_device *mdev); - -#endif diff --git a/drivers/misc/mic/host/mic_x100.c b/drivers/misc/mic/host/mic_x100.c deleted file mode 100644 index f5536c1ad607..000000000000 --- a/drivers/misc/mic/host/mic_x100.c +++ /dev/null @@ -1,585 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Intel MIC Host driver. - */ -#include <linux/fs.h> -#include <linux/pci.h> -#include <linux/sched.h> -#include <linux/firmware.h> -#include <linux/delay.h> - -#include "../common/mic_dev.h" -#include "mic_device.h" -#include "mic_x100.h" -#include "mic_smpt.h" - -static const u16 mic_x100_intr_init[] = { - MIC_X100_DOORBELL_IDX_START, - MIC_X100_DMA_IDX_START, - MIC_X100_ERR_IDX_START, - MIC_X100_NUM_DOORBELL, - MIC_X100_NUM_DMA, - MIC_X100_NUM_ERR, -}; - -/** - * mic_x100_write_spad - write to the scratchpad register - * @mdev: pointer to mic_device instance - * @idx: index to the scratchpad register, 0 based - * @val: the data value to put into the register - * - * This function allows writing of a 32bit value to the indexed scratchpad - * register. - * - * RETURNS: none. - */ -static void -mic_x100_write_spad(struct mic_device *mdev, unsigned int idx, u32 val) -{ - dev_dbg(&mdev->pdev->dev, "Writing 0x%x to scratch pad index %d\n", - val, idx); - mic_mmio_write(&mdev->mmio, val, - MIC_X100_SBOX_BASE_ADDRESS + - MIC_X100_SBOX_SPAD0 + idx * 4); -} - -/** - * mic_x100_read_spad - read from the scratchpad register - * @mdev: pointer to mic_device instance - * @idx: index to scratchpad register, 0 based - * - * This function allows reading of the 32bit scratchpad register. - * - * RETURNS: An appropriate -ERRNO error value on error, or zero for success. - */ -static u32 -mic_x100_read_spad(struct mic_device *mdev, unsigned int idx) -{ - u32 val = mic_mmio_read(&mdev->mmio, - MIC_X100_SBOX_BASE_ADDRESS + - MIC_X100_SBOX_SPAD0 + idx * 4); - - dev_dbg(&mdev->pdev->dev, - "Reading 0x%x from scratch pad index %d\n", val, idx); - return val; -} - -/** - * mic_x100_enable_interrupts - Enable interrupts. - * @mdev: pointer to mic_device instance - */ -static void mic_x100_enable_interrupts(struct mic_device *mdev) -{ - u32 reg; - struct mic_mw *mw = &mdev->mmio; - u32 sice0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICE0; - u32 siac0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SIAC0; - - reg = mic_mmio_read(mw, sice0); - reg |= MIC_X100_SBOX_DBR_BITS(0xf) | MIC_X100_SBOX_DMA_BITS(0xff); - mic_mmio_write(mw, reg, sice0); - - /* - * Enable auto-clear when enabling interrupts. Applicable only for - * MSI-x. Legacy and MSI mode cannot have auto-clear enabled. - */ - if (mdev->irq_info.num_vectors > 1) { - reg = mic_mmio_read(mw, siac0); - reg |= MIC_X100_SBOX_DBR_BITS(0xf) | - MIC_X100_SBOX_DMA_BITS(0xff); - mic_mmio_write(mw, reg, siac0); - } -} - -/** - * mic_x100_disable_interrupts - Disable interrupts. - * @mdev: pointer to mic_device instance - */ -static void mic_x100_disable_interrupts(struct mic_device *mdev) -{ - u32 reg; - struct mic_mw *mw = &mdev->mmio; - u32 sice0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICE0; - u32 siac0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SIAC0; - u32 sicc0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICC0; - - reg = mic_mmio_read(mw, sice0); - mic_mmio_write(mw, reg, sicc0); - - if (mdev->irq_info.num_vectors > 1) { - reg = mic_mmio_read(mw, siac0); - reg &= ~(MIC_X100_SBOX_DBR_BITS(0xf) | - MIC_X100_SBOX_DMA_BITS(0xff)); - mic_mmio_write(mw, reg, siac0); - } -} - -/** - * mic_x100_send_sbox_intr - Send an MIC_X100_SBOX interrupt to MIC. - * @mdev: pointer to mic_device instance - * @doorbell: doorbell number - */ -static void mic_x100_send_sbox_intr(struct mic_device *mdev, - int doorbell) -{ - struct mic_mw *mw = &mdev->mmio; - u64 apic_icr_offset = MIC_X100_SBOX_APICICR0 + doorbell * 8; - u32 apicicr_low = mic_mmio_read(mw, MIC_X100_SBOX_BASE_ADDRESS + - apic_icr_offset); - - /* for MIC we need to make sure we "hit" the send_icr bit (13) */ - apicicr_low = (apicicr_low | (1 << 13)); - - /* Ensure that the interrupt is ordered w.r.t. previous stores. */ - wmb(); - mic_mmio_write(mw, apicicr_low, - MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset); -} - -/** - * mic_x100_send_rdmasr_intr - Send an RDMASR interrupt to MIC. - * @mdev: pointer to mic_device instance - * @doorbell: doorbell number - */ -static void mic_x100_send_rdmasr_intr(struct mic_device *mdev, - int doorbell) -{ - int rdmasr_offset = MIC_X100_SBOX_RDMASR0 + (doorbell << 2); - /* Ensure that the interrupt is ordered w.r.t. previous stores. */ - wmb(); - mic_mmio_write(&mdev->mmio, 0, - MIC_X100_SBOX_BASE_ADDRESS + rdmasr_offset); -} - -/** - * __mic_x100_send_intr - Send interrupt to MIC. - * @mdev: pointer to mic_device instance - * @doorbell: doorbell number. - */ -static void mic_x100_send_intr(struct mic_device *mdev, int doorbell) -{ - int rdmasr_db; - if (doorbell < MIC_X100_NUM_SBOX_IRQ) { - mic_x100_send_sbox_intr(mdev, doorbell); - } else { - rdmasr_db = doorbell - MIC_X100_NUM_SBOX_IRQ; - mic_x100_send_rdmasr_intr(mdev, rdmasr_db); - } -} - -/** - * mic_x100_ack_interrupt - Read the interrupt sources register and - * clear it. This function will be called in the MSI/INTx case. - * @mdev: Pointer to mic_device instance. - * - * Returns: bitmask of interrupt sources triggered. - */ -static u32 mic_x100_ack_interrupt(struct mic_device *mdev) -{ - u32 sicr0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICR0; - u32 reg = mic_mmio_read(&mdev->mmio, sicr0); - mic_mmio_write(&mdev->mmio, reg, sicr0); - return reg; -} - -/** - * mic_x100_intr_workarounds - These hardware specific workarounds are - * to be invoked everytime an interrupt is handled. - * @mdev: Pointer to mic_device instance. - * - * Returns: none - */ -static void mic_x100_intr_workarounds(struct mic_device *mdev) -{ - struct mic_mw *mw = &mdev->mmio; - - /* Clear pending bit array. */ - if (MIC_A0_STEP == mdev->stepping) - mic_mmio_write(mw, 1, MIC_X100_SBOX_BASE_ADDRESS + - MIC_X100_SBOX_MSIXPBACR); - - if (mdev->stepping >= MIC_B0_STEP) - mdev->intr_ops->enable_interrupts(mdev); -} - -/** - * mic_x100_hw_intr_init - Initialize h/w specific interrupt - * information. - * @mdev: pointer to mic_device instance - */ -static void mic_x100_hw_intr_init(struct mic_device *mdev) -{ - mdev->intr_info = (struct mic_intr_info *)mic_x100_intr_init; -} - -/** - * mic_x100_read_msi_to_src_map - read from the MSI mapping registers - * @mdev: pointer to mic_device instance - * @idx: index to the mapping register, 0 based - * - * This function allows reading of the 32bit MSI mapping register. - * - * RETURNS: The value in the register. - */ -static u32 -mic_x100_read_msi_to_src_map(struct mic_device *mdev, int idx) -{ - return mic_mmio_read(&mdev->mmio, - MIC_X100_SBOX_BASE_ADDRESS + - MIC_X100_SBOX_MXAR0 + idx * 4); -} - -/** - * mic_x100_program_msi_to_src_map - program the MSI mapping registers - * @mdev: pointer to mic_device instance - * @idx: index to the mapping register, 0 based - * @offset: The bit offset in the register that needs to be updated. - * @set: boolean specifying if the bit in the specified offset needs - * to be set or cleared. - * - * RETURNS: None. - */ -static void -mic_x100_program_msi_to_src_map(struct mic_device *mdev, - int idx, int offset, bool set) -{ - unsigned long reg; - struct mic_mw *mw = &mdev->mmio; - u32 mxar = MIC_X100_SBOX_BASE_ADDRESS + - MIC_X100_SBOX_MXAR0 + idx * 4; - - reg = mic_mmio_read(mw, mxar); - if (set) - __set_bit(offset, ®); - else - __clear_bit(offset, ®); - mic_mmio_write(mw, reg, mxar); -} - -/* - * mic_x100_reset_fw_ready - Reset Firmware ready status field. - * @mdev: pointer to mic_device instance - */ -static void mic_x100_reset_fw_ready(struct mic_device *mdev) -{ - mdev->ops->write_spad(mdev, MIC_X100_DOWNLOAD_INFO, 0); -} - -/* - * mic_x100_is_fw_ready - Check if firmware is ready. - * @mdev: pointer to mic_device instance - */ -static bool mic_x100_is_fw_ready(struct mic_device *mdev) -{ - u32 scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO); - return MIC_X100_SPAD2_DOWNLOAD_STATUS(scratch2) ? true : false; -} - -/** - * mic_x100_get_apic_id - Get bootstrap APIC ID. - * @mdev: pointer to mic_device instance - */ -static u32 mic_x100_get_apic_id(struct mic_device *mdev) -{ - u32 scratch2 = 0; - - scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO); - return MIC_X100_SPAD2_APIC_ID(scratch2); -} - -/** - * mic_x100_send_firmware_intr - Send an interrupt to the firmware on MIC. - * @mdev: pointer to mic_device instance - */ -static void mic_x100_send_firmware_intr(struct mic_device *mdev) -{ - u32 apicicr_low; - u64 apic_icr_offset = MIC_X100_SBOX_APICICR7; - int vector = MIC_X100_BSP_INTERRUPT_VECTOR; - struct mic_mw *mw = &mdev->mmio; - - /* - * For MIC we need to make sure we "hit" - * the send_icr bit (13). - */ - apicicr_low = (vector | (1 << 13)); - - mic_mmio_write(mw, mic_x100_get_apic_id(mdev), - MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset + 4); - - /* Ensure that the interrupt is ordered w.r.t. previous stores. */ - wmb(); - mic_mmio_write(mw, apicicr_low, - MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset); -} - -/** - * mic_x100_hw_reset - Reset the MIC device. - * @mdev: pointer to mic_device instance - */ -static void mic_x100_hw_reset(struct mic_device *mdev) -{ - u32 reset_reg; - u32 rgcr = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_RGCR; - struct mic_mw *mw = &mdev->mmio; - - /* Ensure that the reset is ordered w.r.t. previous loads and stores */ - mb(); - /* Trigger reset */ - reset_reg = mic_mmio_read(mw, rgcr); - reset_reg |= 0x1; - mic_mmio_write(mw, reset_reg, rgcr); - /* - * It seems we really want to delay at least 1 second - * after touching reset to prevent a lot of problems. - */ - msleep(1000); -} - -/** - * mic_x100_load_command_line - Load command line to MIC. - * @mdev: pointer to mic_device instance - * @fw: the firmware image - * - * RETURNS: An appropriate -ERRNO error value on error, or zero for success. - */ -static int -mic_x100_load_command_line(struct mic_device *mdev, const struct firmware *fw) -{ - u32 len = 0; - u32 boot_mem; - char *buf; - void __iomem *cmd_line_va = mdev->aper.va + mdev->bootaddr + fw->size; -#define CMDLINE_SIZE 2048 - - boot_mem = mdev->aper.len >> 20; - buf = kzalloc(CMDLINE_SIZE, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - len += scnprintf(buf, CMDLINE_SIZE - len, - " mem=%dM", boot_mem); - if (mdev->cosm_dev->cmdline) - scnprintf(buf + len, CMDLINE_SIZE - len, " %s", - mdev->cosm_dev->cmdline); - memcpy_toio(cmd_line_va, buf, strlen(buf) + 1); - kfree(buf); - return 0; -} - -/** - * mic_x100_load_ramdisk - Load ramdisk to MIC. - * @mdev: pointer to mic_device instance - * - * RETURNS: An appropriate -ERRNO error value on error, or zero for success. - */ -static int -mic_x100_load_ramdisk(struct mic_device *mdev) -{ - const struct firmware *fw; - int rc; - struct boot_params __iomem *bp = mdev->aper.va + mdev->bootaddr; - - rc = request_firmware(&fw, mdev->cosm_dev->ramdisk, &mdev->pdev->dev); - if (rc < 0) { - dev_err(&mdev->pdev->dev, - "ramdisk request_firmware failed: %d %s\n", - rc, mdev->cosm_dev->ramdisk); - goto error; - } - /* - * Typically the bootaddr for card OS is 64M - * so copy over the ramdisk @ 128M. - */ - memcpy_toio(mdev->aper.va + (mdev->bootaddr << 1), fw->data, fw->size); - iowrite32(mdev->bootaddr << 1, &bp->hdr.ramdisk_image); - iowrite32(fw->size, &bp->hdr.ramdisk_size); - release_firmware(fw); -error: - return rc; -} - -/** - * mic_x100_get_boot_addr - Get MIC boot address. - * @mdev: pointer to mic_device instance - * - * This function is called during firmware load to determine - * the address at which the OS should be downloaded in card - * memory i.e. GDDR. - * RETURNS: An appropriate -ERRNO error value on error, or zero for success. - */ -static int -mic_x100_get_boot_addr(struct mic_device *mdev) -{ - u32 scratch2, boot_addr; - int rc = 0; - - scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO); - boot_addr = MIC_X100_SPAD2_DOWNLOAD_ADDR(scratch2); - dev_dbg(&mdev->pdev->dev, "%s %d boot_addr 0x%x\n", - __func__, __LINE__, boot_addr); - if (boot_addr > (1 << 31)) { - dev_err(&mdev->pdev->dev, - "incorrect bootaddr 0x%x\n", - boot_addr); - rc = -EINVAL; - goto error; - } - mdev->bootaddr = boot_addr; -error: - return rc; -} - -/** - * mic_x100_load_firmware - Load firmware to MIC. - * @mdev: pointer to mic_device instance - * @buf: buffer containing boot string including firmware/ramdisk path. - * - * RETURNS: An appropriate -ERRNO error value on error, or zero for success. - */ -static int -mic_x100_load_firmware(struct mic_device *mdev, const char *buf) -{ - int rc; - const struct firmware *fw; - - rc = mic_x100_get_boot_addr(mdev); - if (rc) - return rc; - /* load OS */ - rc = request_firmware(&fw, mdev->cosm_dev->firmware, &mdev->pdev->dev); - if (rc < 0) { - dev_err(&mdev->pdev->dev, - "ramdisk request_firmware failed: %d %s\n", - rc, mdev->cosm_dev->firmware); - return rc; - } - if (mdev->bootaddr > mdev->aper.len - fw->size) { - rc = -EINVAL; - dev_err(&mdev->pdev->dev, "%s %d rc %d bootaddr 0x%x\n", - __func__, __LINE__, rc, mdev->bootaddr); - goto error; - } - memcpy_toio(mdev->aper.va + mdev->bootaddr, fw->data, fw->size); - mdev->ops->write_spad(mdev, MIC_X100_FW_SIZE, fw->size); - if (!strcmp(mdev->cosm_dev->bootmode, "flash")) { - rc = -EINVAL; - dev_err(&mdev->pdev->dev, "%s %d rc %d\n", - __func__, __LINE__, rc); - goto error; - } - /* load command line */ - rc = mic_x100_load_command_line(mdev, fw); - if (rc) { - dev_err(&mdev->pdev->dev, "%s %d rc %d\n", - __func__, __LINE__, rc); - goto error; - } - release_firmware(fw); - /* load ramdisk */ - if (mdev->cosm_dev->ramdisk) - rc = mic_x100_load_ramdisk(mdev); - - return rc; - -error: - release_firmware(fw); - return rc; -} - -/** - * mic_x100_get_postcode - Get postcode status from firmware. - * @mdev: pointer to mic_device instance - * - * RETURNS: postcode. - */ -static u32 mic_x100_get_postcode(struct mic_device *mdev) -{ - return mic_mmio_read(&mdev->mmio, MIC_X100_POSTCODE); -} - -/** - * mic_x100_smpt_set - Update an SMPT entry with a DMA address. - * @mdev: pointer to mic_device instance - * @dma_addr: DMA address to use - * @index: entry to write to - * - * RETURNS: none. - */ -static void -mic_x100_smpt_set(struct mic_device *mdev, dma_addr_t dma_addr, u8 index) -{ -#define SNOOP_ON (0 << 0) -#define SNOOP_OFF (1 << 0) -/* - * Sbox Smpt Reg Bits: - * Bits 31:2 Host address - * Bits 1 RSVD - * Bits 0 No snoop - */ -#define BUILD_SMPT(NO_SNOOP, HOST_ADDR) \ - (u32)(((HOST_ADDR) << 2) | ((NO_SNOOP) & 0x01)) - - uint32_t smpt_reg_val = BUILD_SMPT(SNOOP_ON, - dma_addr >> mdev->smpt->info.page_shift); - mic_mmio_write(&mdev->mmio, smpt_reg_val, - MIC_X100_SBOX_BASE_ADDRESS + - MIC_X100_SBOX_SMPT00 + (4 * index)); -} - -/** - * mic_x100_smpt_hw_init - Initialize SMPT X100 specific fields. - * @mdev: pointer to mic_device instance - * - * RETURNS: none. - */ -static void mic_x100_smpt_hw_init(struct mic_device *mdev) -{ - struct mic_smpt_hw_info *info = &mdev->smpt->info; - - info->num_reg = 32; - info->page_shift = 34; - info->page_size = (1ULL << info->page_shift); - info->base = 0x8000000000ULL; -} - -struct mic_smpt_ops mic_x100_smpt_ops = { - .init = mic_x100_smpt_hw_init, - .set = mic_x100_smpt_set, -}; - -static bool mic_x100_dma_filter(struct dma_chan *chan, void *param) -{ - if (chan->device->dev->parent == (struct device *)param) - return true; - return false; -} - -struct mic_hw_ops mic_x100_ops = { - .aper_bar = MIC_X100_APER_BAR, - .mmio_bar = MIC_X100_MMIO_BAR, - .read_spad = mic_x100_read_spad, - .write_spad = mic_x100_write_spad, - .send_intr = mic_x100_send_intr, - .ack_interrupt = mic_x100_ack_interrupt, - .intr_workarounds = mic_x100_intr_workarounds, - .reset = mic_x100_hw_reset, - .reset_fw_ready = mic_x100_reset_fw_ready, - .is_fw_ready = mic_x100_is_fw_ready, - .send_firmware_intr = mic_x100_send_firmware_intr, - .load_mic_fw = mic_x100_load_firmware, - .get_postcode = mic_x100_get_postcode, - .dma_filter = mic_x100_dma_filter, -}; - -struct mic_hw_intr_ops mic_x100_intr_ops = { - .intr_init = mic_x100_hw_intr_init, - .enable_interrupts = mic_x100_enable_interrupts, - .disable_interrupts = mic_x100_disable_interrupts, - .program_msi_to_src_map = mic_x100_program_msi_to_src_map, - .read_msi_to_src_map = mic_x100_read_msi_to_src_map, -}; diff --git a/drivers/misc/mic/host/mic_x100.h b/drivers/misc/mic/host/mic_x100.h deleted file mode 100644 index aebcaed6fa72..000000000000 --- a/drivers/misc/mic/host/mic_x100.h +++ /dev/null @@ -1,77 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Intel MIC Host driver. - */ -#ifndef _MIC_X100_HW_H_ -#define _MIC_X100_HW_H_ - -#define MIC_X100_PCI_DEVICE_2250 0x2250 -#define MIC_X100_PCI_DEVICE_2251 0x2251 -#define MIC_X100_PCI_DEVICE_2252 0x2252 -#define MIC_X100_PCI_DEVICE_2253 0x2253 -#define MIC_X100_PCI_DEVICE_2254 0x2254 -#define MIC_X100_PCI_DEVICE_2255 0x2255 -#define MIC_X100_PCI_DEVICE_2256 0x2256 -#define MIC_X100_PCI_DEVICE_2257 0x2257 -#define MIC_X100_PCI_DEVICE_2258 0x2258 -#define MIC_X100_PCI_DEVICE_2259 0x2259 -#define MIC_X100_PCI_DEVICE_225a 0x225a -#define MIC_X100_PCI_DEVICE_225b 0x225b -#define MIC_X100_PCI_DEVICE_225c 0x225c -#define MIC_X100_PCI_DEVICE_225d 0x225d -#define MIC_X100_PCI_DEVICE_225e 0x225e - -#define MIC_X100_APER_BAR 0 -#define MIC_X100_MMIO_BAR 4 - -#define MIC_X100_SBOX_BASE_ADDRESS 0x00010000 -#define MIC_X100_SBOX_SPAD0 0x0000AB20 -#define MIC_X100_SBOX_SICR0_DBR(x) ((x) & 0xf) -#define MIC_X100_SBOX_SICR0_DMA(x) (((x) >> 8) & 0xff) -#define MIC_X100_SBOX_SICE0_DBR(x) ((x) & 0xf) -#define MIC_X100_SBOX_DBR_BITS(x) ((x) & 0xf) -#define MIC_X100_SBOX_SICE0_DMA(x) (((x) >> 8) & 0xff) -#define MIC_X100_SBOX_DMA_BITS(x) (((x) & 0xff) << 8) - -#define MIC_X100_SBOX_APICICR0 0x0000A9D0 -#define MIC_X100_SBOX_SICR0 0x00009004 -#define MIC_X100_SBOX_SICE0 0x0000900C -#define MIC_X100_SBOX_SICC0 0x00009010 -#define MIC_X100_SBOX_SIAC0 0x00009014 -#define MIC_X100_SBOX_MSIXPBACR 0x00009084 -#define MIC_X100_SBOX_MXAR0 0x00009044 -#define MIC_X100_SBOX_SMPT00 0x00003100 -#define MIC_X100_SBOX_RDMASR0 0x0000B180 - -#define MIC_X100_DOORBELL_IDX_START 0 -#define MIC_X100_NUM_DOORBELL 4 -#define MIC_X100_DMA_IDX_START 8 -#define MIC_X100_NUM_DMA 8 -#define MIC_X100_ERR_IDX_START 30 -#define MIC_X100_NUM_ERR 1 - -#define MIC_X100_NUM_SBOX_IRQ 8 -#define MIC_X100_NUM_RDMASR_IRQ 8 -#define MIC_X100_RDMASR_IRQ_BASE 17 -#define MIC_X100_SPAD2_DOWNLOAD_STATUS(x) ((x) & 0x1) -#define MIC_X100_SPAD2_APIC_ID(x) (((x) >> 1) & 0x1ff) -#define MIC_X100_SPAD2_DOWNLOAD_ADDR(x) ((x) & 0xfffff000) -#define MIC_X100_SBOX_APICICR7 0x0000AA08 -#define MIC_X100_SBOX_RGCR 0x00004010 -#define MIC_X100_SBOX_SDBIC0 0x0000CC90 -#define MIC_X100_DOWNLOAD_INFO 2 -#define MIC_X100_FW_SIZE 5 -#define MIC_X100_POSTCODE 0x242c - -/* Host->Card(bootstrap) Interrupt Vector */ -#define MIC_X100_BSP_INTERRUPT_VECTOR 229 - -extern struct mic_hw_ops mic_x100_ops; -extern struct mic_smpt_ops mic_x100_smpt_ops; -extern struct mic_hw_intr_ops mic_x100_intr_ops; - -#endif diff --git a/drivers/misc/mic/scif/Makefile b/drivers/misc/mic/scif/Makefile deleted file mode 100644 index ff372555d118..000000000000 --- a/drivers/misc/mic/scif/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile - SCIF driver. -# Copyright(c) 2014, Intel Corporation. -# -obj-$(CONFIG_SCIF) += scif.o -scif-objs := scif_main.o -scif-objs += scif_peer_bus.o -scif-objs += scif_ports.o -scif-objs += scif_debugfs.o -scif-objs += scif_fd.o -scif-objs += scif_api.o -scif-objs += scif_epd.o -scif-objs += scif_rb.o -scif-objs += scif_nodeqp.o -scif-objs += scif_nm.o -scif-objs += scif_dma.o -scif-objs += scif_fence.o -scif-objs += scif_mmap.o -scif-objs += scif_rma.o -scif-objs += scif_rma_list.o diff --git a/drivers/misc/mic/scif/scif_api.c b/drivers/misc/mic/scif/scif_api.c deleted file mode 100644 index 304d6c833712..000000000000 --- a/drivers/misc/mic/scif/scif_api.c +++ /dev/null @@ -1,1485 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel SCIF driver. - */ -#include <linux/scif.h> -#include "scif_main.h" -#include "scif_map.h" - -static const char * const scif_ep_states[] = { - "Unbound", - "Bound", - "Listening", - "Connected", - "Connecting", - "Mapping", - "Closing", - "Close Listening", - "Disconnected", - "Zombie"}; - -enum conn_async_state { - ASYNC_CONN_IDLE = 1, /* ep setup for async connect */ - ASYNC_CONN_INPROGRESS, /* async connect in progress */ - ASYNC_CONN_FLUSH_WORK /* async work flush in progress */ -}; - -/* - * File operations for anonymous inode file associated with a SCIF endpoint, - * used in kernel mode SCIF poll. Kernel mode SCIF poll calls portions of the - * poll API in the kernel and these take in a struct file *. Since a struct - * file is not available to kernel mode SCIF, it uses an anonymous file for - * this purpose. - */ -const struct file_operations scif_anon_fops = { - .owner = THIS_MODULE, -}; - -scif_epd_t scif_open(void) -{ - struct scif_endpt *ep; - int err; - - might_sleep(); - ep = kzalloc(sizeof(*ep), GFP_KERNEL); - if (!ep) - goto err_ep_alloc; - - ep->qp_info.qp = kzalloc(sizeof(*ep->qp_info.qp), GFP_KERNEL); - if (!ep->qp_info.qp) - goto err_qp_alloc; - - err = scif_anon_inode_getfile(ep); - if (err) - goto err_anon_inode; - - spin_lock_init(&ep->lock); - mutex_init(&ep->sendlock); - mutex_init(&ep->recvlock); - - scif_rma_ep_init(ep); - ep->state = SCIFEP_UNBOUND; - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI open: ep %p success\n", ep); - return ep; - -err_anon_inode: - kfree(ep->qp_info.qp); -err_qp_alloc: - kfree(ep); -err_ep_alloc: - return NULL; -} -EXPORT_SYMBOL_GPL(scif_open); - -/* - * scif_disconnect_ep - Disconnects the endpoint if found - * @epd: The end point returned from scif_open() - */ -static struct scif_endpt *scif_disconnect_ep(struct scif_endpt *ep) -{ - struct scifmsg msg; - struct scif_endpt *fep = NULL; - struct scif_endpt *tmpep; - struct list_head *pos, *tmpq; - int err; - - /* - * Wake up any threads blocked in send()/recv() before closing - * out the connection. Grabbing and releasing the send/recv lock - * will ensure that any blocked senders/receivers have exited for - * Ring 0 endpoints. It is a Ring 0 bug to call send/recv after - * close. Ring 3 endpoints are not affected since close will not - * be called while there are IOCTLs executing. - */ - wake_up_interruptible(&ep->sendwq); - wake_up_interruptible(&ep->recvwq); - mutex_lock(&ep->sendlock); - mutex_unlock(&ep->sendlock); - mutex_lock(&ep->recvlock); - mutex_unlock(&ep->recvlock); - - /* Remove from the connected list */ - mutex_lock(&scif_info.connlock); - list_for_each_safe(pos, tmpq, &scif_info.connected) { - tmpep = list_entry(pos, struct scif_endpt, list); - if (tmpep == ep) { - list_del(pos); - fep = tmpep; - spin_lock(&ep->lock); - break; - } - } - - if (!fep) { - /* - * The other side has completed the disconnect before - * the end point can be removed from the list. Therefore - * the ep lock is not locked, traverse the disconnected - * list to find the endpoint and release the conn lock. - */ - list_for_each_safe(pos, tmpq, &scif_info.disconnected) { - tmpep = list_entry(pos, struct scif_endpt, list); - if (tmpep == ep) { - list_del(pos); - break; - } - } - mutex_unlock(&scif_info.connlock); - return NULL; - } - - init_completion(&ep->discon); - msg.uop = SCIF_DISCNCT; - msg.src = ep->port; - msg.dst = ep->peer; - msg.payload[0] = (u64)ep; - msg.payload[1] = ep->remote_ep; - - err = scif_nodeqp_send(ep->remote_dev, &msg); - spin_unlock(&ep->lock); - mutex_unlock(&scif_info.connlock); - - if (!err) - /* Wait for the remote node to respond with SCIF_DISCNT_ACK */ - wait_for_completion_timeout(&ep->discon, - SCIF_NODE_ALIVE_TIMEOUT); - return ep; -} - -int scif_close(scif_epd_t epd) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - struct scif_endpt *tmpep; - struct list_head *pos, *tmpq; - enum scif_epd_state oldstate; - bool flush_conn; - - dev_dbg(scif_info.mdev.this_device, "SCIFAPI close: ep %p %s\n", - ep, scif_ep_states[ep->state]); - might_sleep(); - spin_lock(&ep->lock); - flush_conn = (ep->conn_async_state == ASYNC_CONN_INPROGRESS); - spin_unlock(&ep->lock); - - if (flush_conn) - flush_work(&scif_info.conn_work); - - spin_lock(&ep->lock); - oldstate = ep->state; - - ep->state = SCIFEP_CLOSING; - - switch (oldstate) { - case SCIFEP_ZOMBIE: - dev_err(scif_info.mdev.this_device, - "SCIFAPI close: zombie state unexpected\n"); - fallthrough; - case SCIFEP_DISCONNECTED: - spin_unlock(&ep->lock); - scif_unregister_all_windows(epd); - /* Remove from the disconnected list */ - mutex_lock(&scif_info.connlock); - list_for_each_safe(pos, tmpq, &scif_info.disconnected) { - tmpep = list_entry(pos, struct scif_endpt, list); - if (tmpep == ep) { - list_del(pos); - break; - } - } - mutex_unlock(&scif_info.connlock); - break; - case SCIFEP_UNBOUND: - case SCIFEP_BOUND: - case SCIFEP_CONNECTING: - spin_unlock(&ep->lock); - break; - case SCIFEP_MAPPING: - case SCIFEP_CONNECTED: - case SCIFEP_CLOSING: - { - spin_unlock(&ep->lock); - scif_unregister_all_windows(epd); - scif_disconnect_ep(ep); - break; - } - case SCIFEP_LISTENING: - case SCIFEP_CLLISTEN: - { - struct scif_conreq *conreq; - struct scifmsg msg; - struct scif_endpt *aep; - - spin_unlock(&ep->lock); - mutex_lock(&scif_info.eplock); - - /* remove from listen list */ - list_for_each_safe(pos, tmpq, &scif_info.listen) { - tmpep = list_entry(pos, struct scif_endpt, list); - if (tmpep == ep) - list_del(pos); - } - /* Remove any dangling accepts */ - while (ep->acceptcnt) { - aep = list_first_entry(&ep->li_accept, - struct scif_endpt, liacceptlist); - list_del(&aep->liacceptlist); - scif_put_port(aep->port.port); - list_for_each_safe(pos, tmpq, &scif_info.uaccept) { - tmpep = list_entry(pos, struct scif_endpt, - miacceptlist); - if (tmpep == aep) { - list_del(pos); - break; - } - } - mutex_unlock(&scif_info.eplock); - mutex_lock(&scif_info.connlock); - list_for_each_safe(pos, tmpq, &scif_info.connected) { - tmpep = list_entry(pos, - struct scif_endpt, list); - if (tmpep == aep) { - list_del(pos); - break; - } - } - list_for_each_safe(pos, tmpq, &scif_info.disconnected) { - tmpep = list_entry(pos, - struct scif_endpt, list); - if (tmpep == aep) { - list_del(pos); - break; - } - } - mutex_unlock(&scif_info.connlock); - scif_teardown_ep(aep); - mutex_lock(&scif_info.eplock); - scif_add_epd_to_zombie_list(aep, SCIF_EPLOCK_HELD); - ep->acceptcnt--; - } - - spin_lock(&ep->lock); - mutex_unlock(&scif_info.eplock); - - /* Remove and reject any pending connection requests. */ - while (ep->conreqcnt) { - conreq = list_first_entry(&ep->conlist, - struct scif_conreq, list); - list_del(&conreq->list); - - msg.uop = SCIF_CNCT_REJ; - msg.dst.node = conreq->msg.src.node; - msg.dst.port = conreq->msg.src.port; - msg.payload[0] = conreq->msg.payload[0]; - msg.payload[1] = conreq->msg.payload[1]; - /* - * No Error Handling on purpose for scif_nodeqp_send(). - * If the remote node is lost we still want free the - * connection requests on the self node. - */ - scif_nodeqp_send(&scif_dev[conreq->msg.src.node], - &msg); - ep->conreqcnt--; - kfree(conreq); - } - - spin_unlock(&ep->lock); - /* If a kSCIF accept is waiting wake it up */ - wake_up_interruptible(&ep->conwq); - break; - } - } - scif_put_port(ep->port.port); - scif_anon_inode_fput(ep); - scif_teardown_ep(ep); - scif_add_epd_to_zombie_list(ep, !SCIF_EPLOCK_HELD); - return 0; -} -EXPORT_SYMBOL_GPL(scif_close); - -/** - * scif_flush() - Wakes up any blocking accepts. The endpoint will no longer - * accept new connections. - * @epd: The end point returned from scif_open() - */ -int __scif_flush(scif_epd_t epd) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - - switch (ep->state) { - case SCIFEP_LISTENING: - { - ep->state = SCIFEP_CLLISTEN; - - /* If an accept is waiting wake it up */ - wake_up_interruptible(&ep->conwq); - break; - } - default: - break; - } - return 0; -} - -int scif_bind(scif_epd_t epd, u16 pn) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - int ret = 0; - int tmp; - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI bind: ep %p %s requested port number %d\n", - ep, scif_ep_states[ep->state], pn); - if (pn) { - /* - * Similar to IETF RFC 1700, SCIF ports below - * SCIF_ADMIN_PORT_END can only be bound by system (or root) - * processes or by processes executed by privileged users. - */ - if (pn < SCIF_ADMIN_PORT_END && !capable(CAP_SYS_ADMIN)) { - ret = -EACCES; - goto scif_bind_admin_exit; - } - } - - spin_lock(&ep->lock); - if (ep->state == SCIFEP_BOUND) { - ret = -EINVAL; - goto scif_bind_exit; - } else if (ep->state != SCIFEP_UNBOUND) { - ret = -EISCONN; - goto scif_bind_exit; - } - - if (pn) { - tmp = scif_rsrv_port(pn); - if (tmp != pn) { - ret = -EINVAL; - goto scif_bind_exit; - } - } else { - ret = scif_get_new_port(); - if (ret < 0) - goto scif_bind_exit; - pn = ret; - } - - ep->state = SCIFEP_BOUND; - ep->port.node = scif_info.nodeid; - ep->port.port = pn; - ep->conn_async_state = ASYNC_CONN_IDLE; - ret = pn; - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI bind: bound to port number %d\n", pn); -scif_bind_exit: - spin_unlock(&ep->lock); -scif_bind_admin_exit: - return ret; -} -EXPORT_SYMBOL_GPL(scif_bind); - -int scif_listen(scif_epd_t epd, int backlog) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI listen: ep %p %s\n", ep, scif_ep_states[ep->state]); - spin_lock(&ep->lock); - switch (ep->state) { - case SCIFEP_ZOMBIE: - case SCIFEP_CLOSING: - case SCIFEP_CLLISTEN: - case SCIFEP_UNBOUND: - case SCIFEP_DISCONNECTED: - spin_unlock(&ep->lock); - return -EINVAL; - case SCIFEP_LISTENING: - case SCIFEP_CONNECTED: - case SCIFEP_CONNECTING: - case SCIFEP_MAPPING: - spin_unlock(&ep->lock); - return -EISCONN; - case SCIFEP_BOUND: - break; - } - - ep->state = SCIFEP_LISTENING; - ep->backlog = backlog; - - ep->conreqcnt = 0; - ep->acceptcnt = 0; - INIT_LIST_HEAD(&ep->conlist); - init_waitqueue_head(&ep->conwq); - INIT_LIST_HEAD(&ep->li_accept); - spin_unlock(&ep->lock); - - /* - * Listen status is complete so delete the qp information not needed - * on a listen before placing on the list of listening ep's - */ - scif_teardown_ep(ep); - ep->qp_info.qp = NULL; - - mutex_lock(&scif_info.eplock); - list_add_tail(&ep->list, &scif_info.listen); - mutex_unlock(&scif_info.eplock); - return 0; -} -EXPORT_SYMBOL_GPL(scif_listen); - -/* - ************************************************************************ - * SCIF connection flow: - * - * 1) A SCIF listening endpoint can call scif_accept(..) to wait for SCIF - * connections via a SCIF_CNCT_REQ message - * 2) A SCIF endpoint can initiate a SCIF connection by calling - * scif_connect(..) which calls scif_setup_qp_connect(..) which - * allocates the local qp for the endpoint ring buffer and then sends - * a SCIF_CNCT_REQ to the remote node and waits for a SCIF_CNCT_GNT or - * a SCIF_CNCT_REJ message - * 3) The peer node handles a SCIF_CNCT_REQ via scif_cnctreq_resp(..) which - * wakes up any threads blocked in step 1 or sends a SCIF_CNCT_REJ - * message otherwise - * 4) A thread blocked waiting for incoming connections allocates its local - * endpoint QP and ring buffer following which it sends a SCIF_CNCT_GNT - * and waits for a SCIF_CNCT_GNT(N)ACK. If the allocation fails then - * the node sends a SCIF_CNCT_REJ message - * 5) Upon receipt of a SCIF_CNCT_GNT or a SCIF_CNCT_REJ message the - * connecting endpoint is woken up as part of handling - * scif_cnctgnt_resp(..) following which it maps the remote endpoints' - * QP, updates its outbound QP and sends a SCIF_CNCT_GNTACK message on - * success or a SCIF_CNCT_GNTNACK message on failure and completes - * the scif_connect(..) API - * 6) Upon receipt of a SCIF_CNCT_GNT(N)ACK the accepting endpoint blocked - * in step 4 is woken up and completes the scif_accept(..) API - * 7) The SCIF connection is now established between the two SCIF endpoints. - */ -static int scif_conn_func(struct scif_endpt *ep) -{ - int err = 0; - struct scifmsg msg; - struct device *spdev; - - err = scif_reserve_dma_chan(ep); - if (err) { - dev_err(&ep->remote_dev->sdev->dev, - "%s %d err %d\n", __func__, __LINE__, err); - ep->state = SCIFEP_BOUND; - goto connect_error_simple; - } - /* Initiate the first part of the endpoint QP setup */ - err = scif_setup_qp_connect(ep->qp_info.qp, &ep->qp_info.qp_offset, - SCIF_ENDPT_QP_SIZE, ep->remote_dev); - if (err) { - dev_err(&ep->remote_dev->sdev->dev, - "%s err %d qp_offset 0x%llx\n", - __func__, err, ep->qp_info.qp_offset); - ep->state = SCIFEP_BOUND; - goto connect_error_simple; - } - - spdev = scif_get_peer_dev(ep->remote_dev); - if (IS_ERR(spdev)) { - err = PTR_ERR(spdev); - goto cleanup_qp; - } - /* Format connect message and send it */ - msg.src = ep->port; - msg.dst = ep->conn_port; - msg.uop = SCIF_CNCT_REQ; - msg.payload[0] = (u64)ep; - msg.payload[1] = ep->qp_info.qp_offset; - err = _scif_nodeqp_send(ep->remote_dev, &msg); - if (err) - goto connect_error_dec; - scif_put_peer_dev(spdev); - /* - * Wait for the remote node to respond with SCIF_CNCT_GNT or - * SCIF_CNCT_REJ message. - */ - err = wait_event_timeout(ep->conwq, ep->state != SCIFEP_CONNECTING, - SCIF_NODE_ALIVE_TIMEOUT); - if (!err) { - dev_err(&ep->remote_dev->sdev->dev, - "%s %d timeout\n", __func__, __LINE__); - ep->state = SCIFEP_BOUND; - } - spdev = scif_get_peer_dev(ep->remote_dev); - if (IS_ERR(spdev)) { - err = PTR_ERR(spdev); - goto cleanup_qp; - } - if (ep->state == SCIFEP_MAPPING) { - err = scif_setup_qp_connect_response(ep->remote_dev, - ep->qp_info.qp, - ep->qp_info.gnt_pld); - /* - * If the resource to map the queue are not available then - * we need to tell the other side to terminate the accept - */ - if (err) { - dev_err(&ep->remote_dev->sdev->dev, - "%s %d err %d\n", __func__, __LINE__, err); - msg.uop = SCIF_CNCT_GNTNACK; - msg.payload[0] = ep->remote_ep; - _scif_nodeqp_send(ep->remote_dev, &msg); - ep->state = SCIFEP_BOUND; - goto connect_error_dec; - } - - msg.uop = SCIF_CNCT_GNTACK; - msg.payload[0] = ep->remote_ep; - err = _scif_nodeqp_send(ep->remote_dev, &msg); - if (err) { - ep->state = SCIFEP_BOUND; - goto connect_error_dec; - } - ep->state = SCIFEP_CONNECTED; - mutex_lock(&scif_info.connlock); - list_add_tail(&ep->list, &scif_info.connected); - mutex_unlock(&scif_info.connlock); - dev_dbg(&ep->remote_dev->sdev->dev, - "SCIFAPI connect: ep %p connected\n", ep); - } else if (ep->state == SCIFEP_BOUND) { - dev_dbg(&ep->remote_dev->sdev->dev, - "SCIFAPI connect: ep %p connection refused\n", ep); - err = -ECONNREFUSED; - goto connect_error_dec; - } - scif_put_peer_dev(spdev); - return err; -connect_error_dec: - scif_put_peer_dev(spdev); -cleanup_qp: - scif_cleanup_ep_qp(ep); -connect_error_simple: - return err; -} - -/* - * scif_conn_handler: - * - * Workqueue handler for servicing non-blocking SCIF connect - * - */ -void scif_conn_handler(struct work_struct *work) -{ - struct scif_endpt *ep; - - do { - ep = NULL; - spin_lock(&scif_info.nb_connect_lock); - if (!list_empty(&scif_info.nb_connect_list)) { - ep = list_first_entry(&scif_info.nb_connect_list, - struct scif_endpt, conn_list); - list_del(&ep->conn_list); - } - spin_unlock(&scif_info.nb_connect_lock); - if (ep) { - ep->conn_err = scif_conn_func(ep); - wake_up_interruptible(&ep->conn_pend_wq); - } - } while (ep); -} - -int __scif_connect(scif_epd_t epd, struct scif_port_id *dst, bool non_block) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - int err = 0; - struct scif_dev *remote_dev; - struct device *spdev; - - dev_dbg(scif_info.mdev.this_device, "SCIFAPI connect: ep %p %s\n", ep, - scif_ep_states[ep->state]); - - if (!scif_dev || dst->node > scif_info.maxid) - return -ENODEV; - - might_sleep(); - - remote_dev = &scif_dev[dst->node]; - spdev = scif_get_peer_dev(remote_dev); - if (IS_ERR(spdev)) { - err = PTR_ERR(spdev); - return err; - } - - spin_lock(&ep->lock); - switch (ep->state) { - case SCIFEP_ZOMBIE: - case SCIFEP_CLOSING: - err = -EINVAL; - break; - case SCIFEP_DISCONNECTED: - if (ep->conn_async_state == ASYNC_CONN_INPROGRESS) - ep->conn_async_state = ASYNC_CONN_FLUSH_WORK; - else - err = -EINVAL; - break; - case SCIFEP_LISTENING: - case SCIFEP_CLLISTEN: - err = -EOPNOTSUPP; - break; - case SCIFEP_CONNECTING: - case SCIFEP_MAPPING: - if (ep->conn_async_state == ASYNC_CONN_INPROGRESS) - err = -EINPROGRESS; - else - err = -EISCONN; - break; - case SCIFEP_CONNECTED: - if (ep->conn_async_state == ASYNC_CONN_INPROGRESS) - ep->conn_async_state = ASYNC_CONN_FLUSH_WORK; - else - err = -EISCONN; - break; - case SCIFEP_UNBOUND: - err = scif_get_new_port(); - if (err < 0) - break; - ep->port.port = err; - ep->port.node = scif_info.nodeid; - ep->conn_async_state = ASYNC_CONN_IDLE; - fallthrough; - case SCIFEP_BOUND: - /* - * If a non-blocking connect has been already initiated - * (conn_async_state is either ASYNC_CONN_INPROGRESS or - * ASYNC_CONN_FLUSH_WORK), the end point could end up in - * SCIF_BOUND due an error in the connection process - * (e.g., connection refused) If conn_async_state is - * ASYNC_CONN_INPROGRESS - transition to ASYNC_CONN_FLUSH_WORK - * so that the error status can be collected. If the state is - * already ASYNC_CONN_FLUSH_WORK - then set the error to - * EINPROGRESS since some other thread is waiting to collect - * error status. - */ - if (ep->conn_async_state == ASYNC_CONN_INPROGRESS) { - ep->conn_async_state = ASYNC_CONN_FLUSH_WORK; - } else if (ep->conn_async_state == ASYNC_CONN_FLUSH_WORK) { - err = -EINPROGRESS; - } else { - ep->conn_port = *dst; - init_waitqueue_head(&ep->sendwq); - init_waitqueue_head(&ep->recvwq); - init_waitqueue_head(&ep->conwq); - ep->conn_async_state = 0; - - if (unlikely(non_block)) - ep->conn_async_state = ASYNC_CONN_INPROGRESS; - } - break; - } - - if (err || ep->conn_async_state == ASYNC_CONN_FLUSH_WORK) - goto connect_simple_unlock1; - - ep->state = SCIFEP_CONNECTING; - ep->remote_dev = &scif_dev[dst->node]; - ep->qp_info.qp->magic = SCIFEP_MAGIC; - if (ep->conn_async_state == ASYNC_CONN_INPROGRESS) { - init_waitqueue_head(&ep->conn_pend_wq); - spin_lock(&scif_info.nb_connect_lock); - list_add_tail(&ep->conn_list, &scif_info.nb_connect_list); - spin_unlock(&scif_info.nb_connect_lock); - err = -EINPROGRESS; - schedule_work(&scif_info.conn_work); - } -connect_simple_unlock1: - spin_unlock(&ep->lock); - scif_put_peer_dev(spdev); - if (err) { - return err; - } else if (ep->conn_async_state == ASYNC_CONN_FLUSH_WORK) { - flush_work(&scif_info.conn_work); - err = ep->conn_err; - spin_lock(&ep->lock); - ep->conn_async_state = ASYNC_CONN_IDLE; - spin_unlock(&ep->lock); - } else { - err = scif_conn_func(ep); - } - return err; -} - -int scif_connect(scif_epd_t epd, struct scif_port_id *dst) -{ - return __scif_connect(epd, dst, false); -} -EXPORT_SYMBOL_GPL(scif_connect); - -/* - * scif_accept() - Accept a connection request from the remote node - * - * The function accepts a connection request from the remote node. Successful - * complete is indicate by a new end point being created and passed back - * to the caller for future reference. - * - * Upon successful complete a zero will be returned and the peer information - * will be filled in. - * - * If the end point is not in the listening state -EINVAL will be returned. - * - * If during the connection sequence resource allocation fails the -ENOMEM - * will be returned. - * - * If the function is called with the ASYNC flag set and no connection requests - * are pending it will return -EAGAIN. - * - * If the remote side is not sending any connection requests the caller may - * terminate this function with a signal. If so a -EINTR will be returned. - */ -int scif_accept(scif_epd_t epd, struct scif_port_id *peer, - scif_epd_t *newepd, int flags) -{ - struct scif_endpt *lep = (struct scif_endpt *)epd; - struct scif_endpt *cep; - struct scif_conreq *conreq; - struct scifmsg msg; - int err; - struct device *spdev; - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI accept: ep %p %s\n", lep, scif_ep_states[lep->state]); - - if (flags & ~SCIF_ACCEPT_SYNC) - return -EINVAL; - - if (!peer || !newepd) - return -EINVAL; - - might_sleep(); - spin_lock(&lep->lock); - if (lep->state != SCIFEP_LISTENING) { - spin_unlock(&lep->lock); - return -EINVAL; - } - - if (!lep->conreqcnt && !(flags & SCIF_ACCEPT_SYNC)) { - /* No connection request present and we do not want to wait */ - spin_unlock(&lep->lock); - return -EAGAIN; - } - - lep->files = current->files; -retry_connection: - spin_unlock(&lep->lock); - /* Wait for the remote node to send us a SCIF_CNCT_REQ */ - err = wait_event_interruptible(lep->conwq, - (lep->conreqcnt || - (lep->state != SCIFEP_LISTENING))); - if (err) - return err; - - if (lep->state != SCIFEP_LISTENING) - return -EINTR; - - spin_lock(&lep->lock); - - if (!lep->conreqcnt) - goto retry_connection; - - /* Get the first connect request off the list */ - conreq = list_first_entry(&lep->conlist, struct scif_conreq, list); - list_del(&conreq->list); - lep->conreqcnt--; - spin_unlock(&lep->lock); - - /* Fill in the peer information */ - peer->node = conreq->msg.src.node; - peer->port = conreq->msg.src.port; - - cep = kzalloc(sizeof(*cep), GFP_KERNEL); - if (!cep) { - err = -ENOMEM; - goto scif_accept_error_epalloc; - } - spin_lock_init(&cep->lock); - mutex_init(&cep->sendlock); - mutex_init(&cep->recvlock); - cep->state = SCIFEP_CONNECTING; - cep->remote_dev = &scif_dev[peer->node]; - cep->remote_ep = conreq->msg.payload[0]; - - scif_rma_ep_init(cep); - - err = scif_reserve_dma_chan(cep); - if (err) { - dev_err(scif_info.mdev.this_device, - "%s %d err %d\n", __func__, __LINE__, err); - goto scif_accept_error_qpalloc; - } - - cep->qp_info.qp = kzalloc(sizeof(*cep->qp_info.qp), GFP_KERNEL); - if (!cep->qp_info.qp) { - err = -ENOMEM; - goto scif_accept_error_qpalloc; - } - - err = scif_anon_inode_getfile(cep); - if (err) - goto scif_accept_error_anon_inode; - - cep->qp_info.qp->magic = SCIFEP_MAGIC; - spdev = scif_get_peer_dev(cep->remote_dev); - if (IS_ERR(spdev)) { - err = PTR_ERR(spdev); - goto scif_accept_error_map; - } - err = scif_setup_qp_accept(cep->qp_info.qp, &cep->qp_info.qp_offset, - conreq->msg.payload[1], SCIF_ENDPT_QP_SIZE, - cep->remote_dev); - if (err) { - dev_dbg(&cep->remote_dev->sdev->dev, - "SCIFAPI accept: ep %p new %p scif_setup_qp_accept %d qp_offset 0x%llx\n", - lep, cep, err, cep->qp_info.qp_offset); - scif_put_peer_dev(spdev); - goto scif_accept_error_map; - } - - cep->port.node = lep->port.node; - cep->port.port = lep->port.port; - cep->peer.node = peer->node; - cep->peer.port = peer->port; - init_waitqueue_head(&cep->sendwq); - init_waitqueue_head(&cep->recvwq); - init_waitqueue_head(&cep->conwq); - - msg.uop = SCIF_CNCT_GNT; - msg.src = cep->port; - msg.payload[0] = cep->remote_ep; - msg.payload[1] = cep->qp_info.qp_offset; - msg.payload[2] = (u64)cep; - - err = _scif_nodeqp_send(cep->remote_dev, &msg); - scif_put_peer_dev(spdev); - if (err) - goto scif_accept_error_map; -retry: - /* Wait for the remote node to respond with SCIF_CNCT_GNT(N)ACK */ - err = wait_event_timeout(cep->conwq, cep->state != SCIFEP_CONNECTING, - SCIF_NODE_ACCEPT_TIMEOUT); - if (!err && scifdev_alive(cep)) - goto retry; - err = !err ? -ENODEV : 0; - if (err) - goto scif_accept_error_map; - kfree(conreq); - - spin_lock(&cep->lock); - - if (cep->state == SCIFEP_CLOSING) { - /* - * Remote failed to allocate resources and NAKed the grant. - * There is at this point nothing referencing the new end point. - */ - spin_unlock(&cep->lock); - scif_teardown_ep(cep); - kfree(cep); - - /* If call with sync flag then go back and wait. */ - if (flags & SCIF_ACCEPT_SYNC) { - spin_lock(&lep->lock); - goto retry_connection; - } - return -EAGAIN; - } - - scif_get_port(cep->port.port); - *newepd = (scif_epd_t)cep; - spin_unlock(&cep->lock); - return 0; -scif_accept_error_map: - scif_anon_inode_fput(cep); -scif_accept_error_anon_inode: - scif_teardown_ep(cep); -scif_accept_error_qpalloc: - kfree(cep); -scif_accept_error_epalloc: - msg.uop = SCIF_CNCT_REJ; - msg.dst.node = conreq->msg.src.node; - msg.dst.port = conreq->msg.src.port; - msg.payload[0] = conreq->msg.payload[0]; - msg.payload[1] = conreq->msg.payload[1]; - scif_nodeqp_send(&scif_dev[conreq->msg.src.node], &msg); - kfree(conreq); - return err; -} -EXPORT_SYMBOL_GPL(scif_accept); - -/* - * scif_msg_param_check: - * @epd: The end point returned from scif_open() - * @len: Length to receive - * @flags: blocking or non blocking - * - * Validate parameters for messaging APIs scif_send(..)/scif_recv(..). - */ -static inline int scif_msg_param_check(scif_epd_t epd, int len, int flags) -{ - int ret = -EINVAL; - - if (len < 0) - goto err_ret; - if (flags && (!(flags & SCIF_RECV_BLOCK))) - goto err_ret; - ret = 0; -err_ret: - return ret; -} - -static int _scif_send(scif_epd_t epd, void *msg, int len, int flags) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - struct scifmsg notif_msg; - int curr_xfer_len = 0, sent_len = 0, write_count; - int ret = 0; - struct scif_qp *qp = ep->qp_info.qp; - - if (flags & SCIF_SEND_BLOCK) - might_sleep(); - - spin_lock(&ep->lock); - while (sent_len != len && SCIFEP_CONNECTED == ep->state) { - write_count = scif_rb_space(&qp->outbound_q); - if (write_count) { - /* Best effort to send as much data as possible */ - curr_xfer_len = min(len - sent_len, write_count); - ret = scif_rb_write(&qp->outbound_q, msg, - curr_xfer_len); - if (ret < 0) - break; - /* Success. Update write pointer */ - scif_rb_commit(&qp->outbound_q); - /* - * Send a notification to the peer about the - * produced data message. - */ - notif_msg.src = ep->port; - notif_msg.uop = SCIF_CLIENT_SENT; - notif_msg.payload[0] = ep->remote_ep; - ret = _scif_nodeqp_send(ep->remote_dev, ¬if_msg); - if (ret) - break; - sent_len += curr_xfer_len; - msg = msg + curr_xfer_len; - continue; - } - curr_xfer_len = min(len - sent_len, SCIF_ENDPT_QP_SIZE - 1); - /* Not enough RB space. return for the Non Blocking case */ - if (!(flags & SCIF_SEND_BLOCK)) - break; - - spin_unlock(&ep->lock); - /* Wait for a SCIF_CLIENT_RCVD message in the Blocking case */ - ret = - wait_event_interruptible(ep->sendwq, - (SCIFEP_CONNECTED != ep->state) || - (scif_rb_space(&qp->outbound_q) >= - curr_xfer_len)); - spin_lock(&ep->lock); - if (ret) - break; - } - if (sent_len) - ret = sent_len; - else if (!ret && SCIFEP_CONNECTED != ep->state) - ret = SCIFEP_DISCONNECTED == ep->state ? - -ECONNRESET : -ENOTCONN; - spin_unlock(&ep->lock); - return ret; -} - -static int _scif_recv(scif_epd_t epd, void *msg, int len, int flags) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - struct scifmsg notif_msg; - int curr_recv_len = 0, remaining_len = len, read_count; - int ret = 0; - struct scif_qp *qp = ep->qp_info.qp; - - if (flags & SCIF_RECV_BLOCK) - might_sleep(); - spin_lock(&ep->lock); - while (remaining_len && (SCIFEP_CONNECTED == ep->state || - SCIFEP_DISCONNECTED == ep->state)) { - read_count = scif_rb_count(&qp->inbound_q, remaining_len); - if (read_count) { - /* - * Best effort to recv as much data as there - * are bytes to read in the RB particularly - * important for the Non Blocking case. - */ - curr_recv_len = min(remaining_len, read_count); - scif_rb_get_next(&qp->inbound_q, msg, curr_recv_len); - if (ep->state == SCIFEP_CONNECTED) { - /* - * Update the read pointer only if the endpoint - * is still connected else the read pointer - * might no longer exist since the peer has - * freed resources! - */ - scif_rb_update_read_ptr(&qp->inbound_q); - /* - * Send a notification to the peer about the - * consumed data message only if the EP is in - * SCIFEP_CONNECTED state. - */ - notif_msg.src = ep->port; - notif_msg.uop = SCIF_CLIENT_RCVD; - notif_msg.payload[0] = ep->remote_ep; - ret = _scif_nodeqp_send(ep->remote_dev, - ¬if_msg); - if (ret) - break; - } - remaining_len -= curr_recv_len; - msg = msg + curr_recv_len; - continue; - } - /* - * Bail out now if the EP is in SCIFEP_DISCONNECTED state else - * we will keep looping forever. - */ - if (ep->state == SCIFEP_DISCONNECTED) - break; - /* - * Return in the Non Blocking case if there is no data - * to read in this iteration. - */ - if (!(flags & SCIF_RECV_BLOCK)) - break; - curr_recv_len = min(remaining_len, SCIF_ENDPT_QP_SIZE - 1); - spin_unlock(&ep->lock); - /* - * Wait for a SCIF_CLIENT_SEND message in the blocking case - * or until other side disconnects. - */ - ret = - wait_event_interruptible(ep->recvwq, - SCIFEP_CONNECTED != ep->state || - scif_rb_count(&qp->inbound_q, - curr_recv_len) - >= curr_recv_len); - spin_lock(&ep->lock); - if (ret) - break; - } - if (len - remaining_len) - ret = len - remaining_len; - else if (!ret && ep->state != SCIFEP_CONNECTED) - ret = ep->state == SCIFEP_DISCONNECTED ? - -ECONNRESET : -ENOTCONN; - spin_unlock(&ep->lock); - return ret; -} - -/** - * scif_user_send() - Send data to connection queue - * @epd: The end point returned from scif_open() - * @msg: Address to place data - * @len: Length to receive - * @flags: blocking or non blocking - * - * This function is called from the driver IOCTL entry point - * only and is a wrapper for _scif_send(). - */ -int scif_user_send(scif_epd_t epd, void __user *msg, int len, int flags) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - int err = 0; - int sent_len = 0; - char *tmp; - int loop_len; - int chunk_len = min(len, (1 << (MAX_ORDER + PAGE_SHIFT - 1))); - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI send (U): ep %p %s\n", ep, scif_ep_states[ep->state]); - if (!len) - return 0; - - err = scif_msg_param_check(epd, len, flags); - if (err) - goto send_err; - - tmp = kmalloc(chunk_len, GFP_KERNEL); - if (!tmp) { - err = -ENOMEM; - goto send_err; - } - /* - * Grabbing the lock before breaking up the transfer in - * multiple chunks is required to ensure that messages do - * not get fragmented and reordered. - */ - mutex_lock(&ep->sendlock); - while (sent_len != len) { - loop_len = len - sent_len; - loop_len = min(chunk_len, loop_len); - if (copy_from_user(tmp, msg, loop_len)) { - err = -EFAULT; - goto send_free_err; - } - err = _scif_send(epd, tmp, loop_len, flags); - if (err < 0) - goto send_free_err; - sent_len += err; - msg += err; - if (err != loop_len) - goto send_free_err; - } -send_free_err: - mutex_unlock(&ep->sendlock); - kfree(tmp); -send_err: - return err < 0 ? err : sent_len; -} - -/** - * scif_user_recv() - Receive data from connection queue - * @epd: The end point returned from scif_open() - * @msg: Address to place data - * @len: Length to receive - * @flags: blocking or non blocking - * - * This function is called from the driver IOCTL entry point - * only and is a wrapper for _scif_recv(). - */ -int scif_user_recv(scif_epd_t epd, void __user *msg, int len, int flags) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - int err = 0; - int recv_len = 0; - char *tmp; - int loop_len; - int chunk_len = min(len, (1 << (MAX_ORDER + PAGE_SHIFT - 1))); - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI recv (U): ep %p %s\n", ep, scif_ep_states[ep->state]); - if (!len) - return 0; - - err = scif_msg_param_check(epd, len, flags); - if (err) - goto recv_err; - - tmp = kmalloc(chunk_len, GFP_KERNEL); - if (!tmp) { - err = -ENOMEM; - goto recv_err; - } - /* - * Grabbing the lock before breaking up the transfer in - * multiple chunks is required to ensure that messages do - * not get fragmented and reordered. - */ - mutex_lock(&ep->recvlock); - while (recv_len != len) { - loop_len = len - recv_len; - loop_len = min(chunk_len, loop_len); - err = _scif_recv(epd, tmp, loop_len, flags); - if (err < 0) - goto recv_free_err; - if (copy_to_user(msg, tmp, err)) { - err = -EFAULT; - goto recv_free_err; - } - recv_len += err; - msg += err; - if (err != loop_len) - goto recv_free_err; - } -recv_free_err: - mutex_unlock(&ep->recvlock); - kfree(tmp); -recv_err: - return err < 0 ? err : recv_len; -} - -/** - * scif_send() - Send data to connection queue - * @epd: The end point returned from scif_open() - * @msg: Address to place data - * @len: Length to receive - * @flags: blocking or non blocking - * - * This function is called from the kernel mode only and is - * a wrapper for _scif_send(). - */ -int scif_send(scif_epd_t epd, void *msg, int len, int flags) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - int ret; - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI send (K): ep %p %s\n", ep, scif_ep_states[ep->state]); - if (!len) - return 0; - - ret = scif_msg_param_check(epd, len, flags); - if (ret) - return ret; - if (!ep->remote_dev) - return -ENOTCONN; - /* - * Grab the mutex lock in the blocking case only - * to ensure messages do not get fragmented/reordered. - * The non blocking mode is protected using spin locks - * in _scif_send(). - */ - if (flags & SCIF_SEND_BLOCK) - mutex_lock(&ep->sendlock); - - ret = _scif_send(epd, msg, len, flags); - - if (flags & SCIF_SEND_BLOCK) - mutex_unlock(&ep->sendlock); - return ret; -} -EXPORT_SYMBOL_GPL(scif_send); - -/** - * scif_recv() - Receive data from connection queue - * @epd: The end point returned from scif_open() - * @msg: Address to place data - * @len: Length to receive - * @flags: blocking or non blocking - * - * This function is called from the kernel mode only and is - * a wrapper for _scif_recv(). - */ -int scif_recv(scif_epd_t epd, void *msg, int len, int flags) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - int ret; - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI recv (K): ep %p %s\n", ep, scif_ep_states[ep->state]); - if (!len) - return 0; - - ret = scif_msg_param_check(epd, len, flags); - if (ret) - return ret; - /* - * Grab the mutex lock in the blocking case only - * to ensure messages do not get fragmented/reordered. - * The non blocking mode is protected using spin locks - * in _scif_send(). - */ - if (flags & SCIF_RECV_BLOCK) - mutex_lock(&ep->recvlock); - - ret = _scif_recv(epd, msg, len, flags); - - if (flags & SCIF_RECV_BLOCK) - mutex_unlock(&ep->recvlock); - - return ret; -} -EXPORT_SYMBOL_GPL(scif_recv); - -static inline void _scif_poll_wait(struct file *f, wait_queue_head_t *wq, - poll_table *p, struct scif_endpt *ep) -{ - /* - * Because poll_wait makes a GFP_KERNEL allocation, give up the lock - * and regrab it afterwards. Because the endpoint state might have - * changed while the lock was given up, the state must be checked - * again after re-acquiring the lock. The code in __scif_pollfd(..) - * does this. - */ - spin_unlock(&ep->lock); - poll_wait(f, wq, p); - spin_lock(&ep->lock); -} - -__poll_t -__scif_pollfd(struct file *f, poll_table *wait, struct scif_endpt *ep) -{ - __poll_t mask = 0; - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI pollfd: ep %p %s\n", ep, scif_ep_states[ep->state]); - - spin_lock(&ep->lock); - - /* Endpoint is waiting for a non-blocking connect to complete */ - if (ep->conn_async_state == ASYNC_CONN_INPROGRESS) { - _scif_poll_wait(f, &ep->conn_pend_wq, wait, ep); - if (ep->conn_async_state == ASYNC_CONN_INPROGRESS) { - if (ep->state == SCIFEP_CONNECTED || - ep->state == SCIFEP_DISCONNECTED || - ep->conn_err) - mask |= EPOLLOUT; - goto exit; - } - } - - /* Endpoint is listening for incoming connection requests */ - if (ep->state == SCIFEP_LISTENING) { - _scif_poll_wait(f, &ep->conwq, wait, ep); - if (ep->state == SCIFEP_LISTENING) { - if (ep->conreqcnt) - mask |= EPOLLIN; - goto exit; - } - } - - /* Endpoint is connected or disconnected */ - if (ep->state == SCIFEP_CONNECTED || ep->state == SCIFEP_DISCONNECTED) { - if (poll_requested_events(wait) & EPOLLIN) - _scif_poll_wait(f, &ep->recvwq, wait, ep); - if (poll_requested_events(wait) & EPOLLOUT) - _scif_poll_wait(f, &ep->sendwq, wait, ep); - if (ep->state == SCIFEP_CONNECTED || - ep->state == SCIFEP_DISCONNECTED) { - /* Data can be read without blocking */ - if (scif_rb_count(&ep->qp_info.qp->inbound_q, 1)) - mask |= EPOLLIN; - /* Data can be written without blocking */ - if (scif_rb_space(&ep->qp_info.qp->outbound_q)) - mask |= EPOLLOUT; - /* Return EPOLLHUP if endpoint is disconnected */ - if (ep->state == SCIFEP_DISCONNECTED) - mask |= EPOLLHUP; - goto exit; - } - } - - /* Return EPOLLERR if the endpoint is in none of the above states */ - mask |= EPOLLERR; -exit: - spin_unlock(&ep->lock); - return mask; -} - -/** - * scif_poll() - Kernel mode SCIF poll - * @ufds: Array of scif_pollepd structures containing the end points - * and events to poll on - * @nfds: Size of the ufds array - * @timeout_msecs: Timeout in msecs, -ve implies infinite timeout - * - * The code flow in this function is based on do_poll(..) in select.c - * - * Returns the number of endpoints which have pending events or 0 in - * the event of a timeout. If a signal is used for wake up, -EINTR is - * returned. - */ -int -scif_poll(struct scif_pollepd *ufds, unsigned int nfds, long timeout_msecs) -{ - struct poll_wqueues table; - poll_table *pt; - int i, count = 0, timed_out = timeout_msecs == 0; - __poll_t mask; - u64 timeout = timeout_msecs < 0 ? MAX_SCHEDULE_TIMEOUT - : msecs_to_jiffies(timeout_msecs); - - poll_initwait(&table); - pt = &table.pt; - while (1) { - for (i = 0; i < nfds; i++) { - pt->_key = ufds[i].events | EPOLLERR | EPOLLHUP; - mask = __scif_pollfd(ufds[i].epd->anon, - pt, ufds[i].epd); - mask &= ufds[i].events | EPOLLERR | EPOLLHUP; - if (mask) { - count++; - pt->_qproc = NULL; - } - ufds[i].revents = mask; - } - pt->_qproc = NULL; - if (!count) { - count = table.error; - if (signal_pending(current)) - count = -EINTR; - } - if (count || timed_out) - break; - - if (!schedule_timeout_interruptible(timeout)) - timed_out = 1; - } - poll_freewait(&table); - return count; -} -EXPORT_SYMBOL_GPL(scif_poll); - -int scif_get_node_ids(u16 *nodes, int len, u16 *self) -{ - int online = 0; - int offset = 0; - int node; - - if (!scif_is_mgmt_node()) - scif_get_node_info(); - - *self = scif_info.nodeid; - mutex_lock(&scif_info.conflock); - len = min_t(int, len, scif_info.total); - for (node = 0; node <= scif_info.maxid; node++) { - if (_scifdev_alive(&scif_dev[node])) { - online++; - if (offset < len) - nodes[offset++] = node; - } - } - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI get_node_ids total %d online %d filled in %d nodes\n", - scif_info.total, online, offset); - mutex_unlock(&scif_info.conflock); - - return online; -} -EXPORT_SYMBOL_GPL(scif_get_node_ids); - -static int scif_add_client_dev(struct device *dev, struct subsys_interface *si) -{ - struct scif_client *client = - container_of(si, struct scif_client, si); - struct scif_peer_dev *spdev = - container_of(dev, struct scif_peer_dev, dev); - - if (client->probe) - client->probe(spdev); - return 0; -} - -static void scif_remove_client_dev(struct device *dev, - struct subsys_interface *si) -{ - struct scif_client *client = - container_of(si, struct scif_client, si); - struct scif_peer_dev *spdev = - container_of(dev, struct scif_peer_dev, dev); - - if (client->remove) - client->remove(spdev); -} - -void scif_client_unregister(struct scif_client *client) -{ - subsys_interface_unregister(&client->si); -} -EXPORT_SYMBOL_GPL(scif_client_unregister); - -int scif_client_register(struct scif_client *client) -{ - struct subsys_interface *si = &client->si; - - si->name = client->name; - si->subsys = &scif_peer_bus; - si->add_dev = scif_add_client_dev; - si->remove_dev = scif_remove_client_dev; - - return subsys_interface_register(&client->si); -} -EXPORT_SYMBOL_GPL(scif_client_register); diff --git a/drivers/misc/mic/scif/scif_debugfs.c b/drivers/misc/mic/scif/scif_debugfs.c deleted file mode 100644 index 8fe38e7ca6e6..000000000000 --- a/drivers/misc/mic/scif/scif_debugfs.c +++ /dev/null @@ -1,116 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel SCIF driver. - */ -#include <linux/debugfs.h> -#include <linux/seq_file.h> - -#include "../common/mic_dev.h" -#include "scif_main.h" - -/* Debugfs parent dir */ -static struct dentry *scif_dbg; - -static int scif_dev_show(struct seq_file *s, void *unused) -{ - int node; - - seq_printf(s, "Total Nodes %d Self Node Id %d Maxid %d\n", - scif_info.total, scif_info.nodeid, - scif_info.maxid); - - if (!scif_dev) - return 0; - - seq_printf(s, "%-16s\t%-16s\n", "node_id", "state"); - - for (node = 0; node <= scif_info.maxid; node++) - seq_printf(s, "%-16d\t%-16s\n", scif_dev[node].node, - _scifdev_alive(&scif_dev[node]) ? - "Running" : "Offline"); - return 0; -} - -DEFINE_SHOW_ATTRIBUTE(scif_dev); - -static void scif_display_window(struct scif_window *window, struct seq_file *s) -{ - int j; - struct scatterlist *sg; - scif_pinned_pages_t pin = window->pinned_pages; - - seq_printf(s, "window %p type %d temp %d offset 0x%llx ", - window, window->type, window->temp, window->offset); - seq_printf(s, "nr_pages 0x%llx nr_contig_chunks 0x%x prot %d ", - window->nr_pages, window->nr_contig_chunks, window->prot); - seq_printf(s, "ref_count %d magic 0x%llx peer_window 0x%llx ", - window->ref_count, window->magic, window->peer_window); - seq_printf(s, "unreg_state 0x%x va_for_temp 0x%lx\n", - window->unreg_state, window->va_for_temp); - - for (j = 0; j < window->nr_contig_chunks; j++) - seq_printf(s, "page[%d] dma_addr 0x%llx num_pages 0x%llx\n", j, - window->dma_addr[j], window->num_pages[j]); - - if (window->type == SCIF_WINDOW_SELF && pin) - for (j = 0; j < window->nr_pages; j++) - seq_printf(s, "page[%d] = pinned_pages %p address %p\n", - j, pin->pages[j], - page_address(pin->pages[j])); - - if (window->st) - for_each_sg(window->st->sgl, sg, window->st->nents, j) - seq_printf(s, "sg[%d] dma addr 0x%llx length 0x%x\n", - j, sg_dma_address(sg), sg_dma_len(sg)); -} - -static void scif_display_all_windows(struct list_head *head, struct seq_file *s) -{ - struct list_head *item; - struct scif_window *window; - - list_for_each(item, head) { - window = list_entry(item, struct scif_window, list); - scif_display_window(window, s); - } -} - -static int scif_rma_show(struct seq_file *s, void *unused) -{ - struct scif_endpt *ep; - struct list_head *pos; - - mutex_lock(&scif_info.connlock); - list_for_each(pos, &scif_info.connected) { - ep = list_entry(pos, struct scif_endpt, list); - seq_printf(s, "ep %p self windows\n", ep); - mutex_lock(&ep->rma_info.rma_lock); - scif_display_all_windows(&ep->rma_info.reg_list, s); - seq_printf(s, "ep %p remote windows\n", ep); - scif_display_all_windows(&ep->rma_info.remote_reg_list, s); - mutex_unlock(&ep->rma_info.rma_lock); - } - mutex_unlock(&scif_info.connlock); - return 0; -} - -DEFINE_SHOW_ATTRIBUTE(scif_rma); - -void __init scif_init_debugfs(void) -{ - scif_dbg = debugfs_create_dir(KBUILD_MODNAME, NULL); - - debugfs_create_file("scif_dev", 0444, scif_dbg, NULL, &scif_dev_fops); - debugfs_create_file("scif_rma", 0444, scif_dbg, NULL, &scif_rma_fops); - debugfs_create_u8("en_msg_log", 0666, scif_dbg, &scif_info.en_msg_log); - debugfs_create_u8("p2p_enable", 0666, scif_dbg, &scif_info.p2p_enable); -} - -void scif_exit_debugfs(void) -{ - debugfs_remove_recursive(scif_dbg); -} diff --git a/drivers/misc/mic/scif/scif_dma.c b/drivers/misc/mic/scif/scif_dma.c deleted file mode 100644 index 401b98e5ad79..000000000000 --- a/drivers/misc/mic/scif/scif_dma.c +++ /dev/null @@ -1,1940 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2015 Intel Corporation. - * - * Intel SCIF driver. - */ -#include "scif_main.h" -#include "scif_map.h" - -/* - * struct scif_dma_comp_cb - SCIF DMA completion callback - * - * @dma_completion_func: DMA completion callback - * @cb_cookie: DMA completion callback cookie - * @temp_buf: Temporary buffer - * @temp_buf_to_free: Temporary buffer to be freed - * @is_cache: Is a kmem_cache allocated buffer - * @dst_offset: Destination registration offset - * @dst_window: Destination registration window - * @len: Length of the temp buffer - * @temp_phys: DMA address of the temp buffer - * @sdev: The SCIF device - * @header_padding: padding for cache line alignment - */ -struct scif_dma_comp_cb { - void (*dma_completion_func)(void *cookie); - void *cb_cookie; - u8 *temp_buf; - u8 *temp_buf_to_free; - bool is_cache; - s64 dst_offset; - struct scif_window *dst_window; - size_t len; - dma_addr_t temp_phys; - struct scif_dev *sdev; - int header_padding; -}; - -/** - * struct scif_copy_work - Work for DMA copy - * - * @src_offset: Starting source offset - * @dst_offset: Starting destination offset - * @src_window: Starting src registered window - * @dst_window: Starting dst registered window - * @loopback: true if this is a loopback DMA transfer - * @len: Length of the transfer - * @comp_cb: DMA copy completion callback - * @remote_dev: The remote SCIF peer device - * @fence_type: polling or interrupt based - * @ordered: is this a tail byte ordered DMA transfer - */ -struct scif_copy_work { - s64 src_offset; - s64 dst_offset; - struct scif_window *src_window; - struct scif_window *dst_window; - int loopback; - size_t len; - struct scif_dma_comp_cb *comp_cb; - struct scif_dev *remote_dev; - int fence_type; - bool ordered; -}; - -/** - * scif_reserve_dma_chan: - * @ep: Endpoint Descriptor. - * - * This routine reserves a DMA channel for a particular - * endpoint. All DMA transfers for an endpoint are always - * programmed on the same DMA channel. - */ -int scif_reserve_dma_chan(struct scif_endpt *ep) -{ - int err = 0; - struct scif_dev *scifdev; - struct scif_hw_dev *sdev; - struct dma_chan *chan; - - /* Loopback DMAs are not supported on the management node */ - if (!scif_info.nodeid && scifdev_self(ep->remote_dev)) - return 0; - if (scif_info.nodeid) - scifdev = &scif_dev[0]; - else - scifdev = ep->remote_dev; - sdev = scifdev->sdev; - if (!sdev->num_dma_ch) - return -ENODEV; - chan = sdev->dma_ch[scifdev->dma_ch_idx]; - scifdev->dma_ch_idx = (scifdev->dma_ch_idx + 1) % sdev->num_dma_ch; - mutex_lock(&ep->rma_info.rma_lock); - ep->rma_info.dma_chan = chan; - mutex_unlock(&ep->rma_info.rma_lock); - return err; -} - -#ifdef CONFIG_MMU_NOTIFIER -/* - * scif_rma_destroy_tcw: - * - * This routine destroys temporary cached windows - */ -static -void __scif_rma_destroy_tcw(struct scif_mmu_notif *mmn, - u64 start, u64 len) -{ - struct list_head *item, *tmp; - struct scif_window *window; - u64 start_va, end_va; - u64 end = start + len; - - if (end <= start) - return; - - list_for_each_safe(item, tmp, &mmn->tc_reg_list) { - window = list_entry(item, struct scif_window, list); - if (!len) - break; - start_va = window->va_for_temp; - end_va = start_va + (window->nr_pages << PAGE_SHIFT); - if (start < start_va && end <= start_va) - break; - if (start >= end_va) - continue; - __scif_rma_destroy_tcw_helper(window); - } -} - -static void scif_rma_destroy_tcw(struct scif_mmu_notif *mmn, u64 start, u64 len) -{ - struct scif_endpt *ep = mmn->ep; - - spin_lock(&ep->rma_info.tc_lock); - __scif_rma_destroy_tcw(mmn, start, len); - spin_unlock(&ep->rma_info.tc_lock); -} - -static void scif_rma_destroy_tcw_ep(struct scif_endpt *ep) -{ - struct list_head *item, *tmp; - struct scif_mmu_notif *mmn; - - list_for_each_safe(item, tmp, &ep->rma_info.mmn_list) { - mmn = list_entry(item, struct scif_mmu_notif, list); - scif_rma_destroy_tcw(mmn, 0, ULONG_MAX); - } -} - -static void __scif_rma_destroy_tcw_ep(struct scif_endpt *ep) -{ - struct list_head *item, *tmp; - struct scif_mmu_notif *mmn; - - spin_lock(&ep->rma_info.tc_lock); - list_for_each_safe(item, tmp, &ep->rma_info.mmn_list) { - mmn = list_entry(item, struct scif_mmu_notif, list); - __scif_rma_destroy_tcw(mmn, 0, ULONG_MAX); - } - spin_unlock(&ep->rma_info.tc_lock); -} - -static bool scif_rma_tc_can_cache(struct scif_endpt *ep, size_t cur_bytes) -{ - if ((cur_bytes >> PAGE_SHIFT) > scif_info.rma_tc_limit) - return false; - if ((atomic_read(&ep->rma_info.tcw_total_pages) - + (cur_bytes >> PAGE_SHIFT)) > - scif_info.rma_tc_limit) { - dev_info(scif_info.mdev.this_device, - "%s %d total=%d, current=%zu reached max\n", - __func__, __LINE__, - atomic_read(&ep->rma_info.tcw_total_pages), - (1 + (cur_bytes >> PAGE_SHIFT))); - scif_rma_destroy_tcw_invalid(); - __scif_rma_destroy_tcw_ep(ep); - } - return true; -} - -static void scif_mmu_notifier_release(struct mmu_notifier *mn, - struct mm_struct *mm) -{ - struct scif_mmu_notif *mmn; - - mmn = container_of(mn, struct scif_mmu_notif, ep_mmu_notifier); - scif_rma_destroy_tcw(mmn, 0, ULONG_MAX); - schedule_work(&scif_info.misc_work); -} - -static int scif_mmu_notifier_invalidate_range_start(struct mmu_notifier *mn, - const struct mmu_notifier_range *range) -{ - struct scif_mmu_notif *mmn; - - mmn = container_of(mn, struct scif_mmu_notif, ep_mmu_notifier); - scif_rma_destroy_tcw(mmn, range->start, range->end - range->start); - - return 0; -} - -static void scif_mmu_notifier_invalidate_range_end(struct mmu_notifier *mn, - const struct mmu_notifier_range *range) -{ - /* - * Nothing to do here, everything needed was done in - * invalidate_range_start. - */ -} - -static const struct mmu_notifier_ops scif_mmu_notifier_ops = { - .release = scif_mmu_notifier_release, - .clear_flush_young = NULL, - .invalidate_range_start = scif_mmu_notifier_invalidate_range_start, - .invalidate_range_end = scif_mmu_notifier_invalidate_range_end}; - -static void scif_ep_unregister_mmu_notifier(struct scif_endpt *ep) -{ - struct scif_endpt_rma_info *rma = &ep->rma_info; - struct scif_mmu_notif *mmn = NULL; - struct list_head *item, *tmp; - - mutex_lock(&ep->rma_info.mmn_lock); - list_for_each_safe(item, tmp, &rma->mmn_list) { - mmn = list_entry(item, struct scif_mmu_notif, list); - mmu_notifier_unregister(&mmn->ep_mmu_notifier, mmn->mm); - list_del(item); - kfree(mmn); - } - mutex_unlock(&ep->rma_info.mmn_lock); -} - -static void scif_init_mmu_notifier(struct scif_mmu_notif *mmn, - struct mm_struct *mm, struct scif_endpt *ep) -{ - mmn->ep = ep; - mmn->mm = mm; - mmn->ep_mmu_notifier.ops = &scif_mmu_notifier_ops; - INIT_LIST_HEAD(&mmn->list); - INIT_LIST_HEAD(&mmn->tc_reg_list); -} - -static struct scif_mmu_notif * -scif_find_mmu_notifier(struct mm_struct *mm, struct scif_endpt_rma_info *rma) -{ - struct scif_mmu_notif *mmn; - - list_for_each_entry(mmn, &rma->mmn_list, list) - if (mmn->mm == mm) - return mmn; - return NULL; -} - -static struct scif_mmu_notif * -scif_add_mmu_notifier(struct mm_struct *mm, struct scif_endpt *ep) -{ - struct scif_mmu_notif *mmn - = kzalloc(sizeof(*mmn), GFP_KERNEL); - - if (!mmn) - return ERR_PTR(-ENOMEM); - - scif_init_mmu_notifier(mmn, current->mm, ep); - if (mmu_notifier_register(&mmn->ep_mmu_notifier, current->mm)) { - kfree(mmn); - return ERR_PTR(-EBUSY); - } - list_add(&mmn->list, &ep->rma_info.mmn_list); - return mmn; -} - -/* - * Called from the misc thread to destroy temporary cached windows and - * unregister the MMU notifier for the SCIF endpoint. - */ -void scif_mmu_notif_handler(struct work_struct *work) -{ - struct list_head *pos, *tmpq; - struct scif_endpt *ep; -restart: - scif_rma_destroy_tcw_invalid(); - spin_lock(&scif_info.rmalock); - list_for_each_safe(pos, tmpq, &scif_info.mmu_notif_cleanup) { - ep = list_entry(pos, struct scif_endpt, mmu_list); - list_del(&ep->mmu_list); - spin_unlock(&scif_info.rmalock); - scif_rma_destroy_tcw_ep(ep); - scif_ep_unregister_mmu_notifier(ep); - goto restart; - } - spin_unlock(&scif_info.rmalock); -} - -static bool scif_is_set_reg_cache(int flags) -{ - return !!(flags & SCIF_RMA_USECACHE); -} -#else -static struct scif_mmu_notif * -scif_find_mmu_notifier(struct mm_struct *mm, - struct scif_endpt_rma_info *rma) -{ - return NULL; -} - -static struct scif_mmu_notif * -scif_add_mmu_notifier(struct mm_struct *mm, struct scif_endpt *ep) -{ - return NULL; -} - -void scif_mmu_notif_handler(struct work_struct *work) -{ -} - -static bool scif_is_set_reg_cache(int flags) -{ - return false; -} - -static bool scif_rma_tc_can_cache(struct scif_endpt *ep, size_t cur_bytes) -{ - return false; -} -#endif - -/** - * scif_register_temp: - * @epd: End Point Descriptor. - * @addr: virtual address to/from which to copy - * @len: length of range to copy - * @prot: read/write protection - * @out_offset: computed offset returned by reference. - * @out_window: allocated registered window returned by reference. - * - * Create a temporary registered window. The peer will not know about this - * window. This API is used for scif_vreadfrom()/scif_vwriteto() API's. - */ -static int -scif_register_temp(scif_epd_t epd, unsigned long addr, size_t len, int prot, - off_t *out_offset, struct scif_window **out_window) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - int err; - scif_pinned_pages_t pinned_pages; - size_t aligned_len; - - aligned_len = ALIGN(len, PAGE_SIZE); - - err = __scif_pin_pages((void *)(addr & PAGE_MASK), - aligned_len, &prot, 0, &pinned_pages); - if (err) - return err; - - pinned_pages->prot = prot; - - /* Compute the offset for this registration */ - err = scif_get_window_offset(ep, 0, 0, - aligned_len >> PAGE_SHIFT, - (s64 *)out_offset); - if (err) - goto error_unpin; - - /* Allocate and prepare self registration window */ - *out_window = scif_create_window(ep, aligned_len >> PAGE_SHIFT, - *out_offset, true); - if (!*out_window) { - scif_free_window_offset(ep, NULL, *out_offset); - err = -ENOMEM; - goto error_unpin; - } - - (*out_window)->pinned_pages = pinned_pages; - (*out_window)->nr_pages = pinned_pages->nr_pages; - (*out_window)->prot = pinned_pages->prot; - - (*out_window)->va_for_temp = addr & PAGE_MASK; - err = scif_map_window(ep->remote_dev, *out_window); - if (err) { - /* Something went wrong! Rollback */ - scif_destroy_window(ep, *out_window); - *out_window = NULL; - } else { - *out_offset |= (addr - (*out_window)->va_for_temp); - } - return err; -error_unpin: - if (err) - dev_err(&ep->remote_dev->sdev->dev, - "%s %d err %d\n", __func__, __LINE__, err); - scif_unpin_pages(pinned_pages); - return err; -} - -#define SCIF_DMA_TO (3 * HZ) - -/* - * scif_sync_dma - Program a DMA without an interrupt descriptor - * - * @dev - The address of the pointer to the device instance used - * for DMA registration. - * @chan - DMA channel to be used. - * @sync_wait: Wait for DMA to complete? - * - * Return 0 on success and -errno on error. - */ -static int scif_sync_dma(struct scif_hw_dev *sdev, struct dma_chan *chan, - bool sync_wait) -{ - int err = 0; - struct dma_async_tx_descriptor *tx = NULL; - enum dma_ctrl_flags flags = DMA_PREP_FENCE; - dma_cookie_t cookie; - struct dma_device *ddev; - - if (!chan) { - err = -EIO; - dev_err(&sdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - return err; - } - ddev = chan->device; - - tx = ddev->device_prep_dma_memcpy(chan, 0, 0, 0, flags); - if (!tx) { - err = -ENOMEM; - dev_err(&sdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - goto release; - } - cookie = tx->tx_submit(tx); - - if (dma_submit_error(cookie)) { - err = -ENOMEM; - dev_err(&sdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - goto release; - } - if (!sync_wait) { - dma_async_issue_pending(chan); - } else { - if (dma_sync_wait(chan, cookie) == DMA_COMPLETE) { - err = 0; - } else { - err = -EIO; - dev_err(&sdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - } - } -release: - return err; -} - -static void scif_dma_callback(void *arg) -{ - struct completion *done = (struct completion *)arg; - - complete(done); -} - -#define SCIF_DMA_SYNC_WAIT true -#define SCIF_DMA_POLL BIT(0) -#define SCIF_DMA_INTR BIT(1) - -/* - * scif_async_dma - Program a DMA with an interrupt descriptor - * - * @dev - The address of the pointer to the device instance used - * for DMA registration. - * @chan - DMA channel to be used. - * Return 0 on success and -errno on error. - */ -static int scif_async_dma(struct scif_hw_dev *sdev, struct dma_chan *chan) -{ - int err = 0; - struct dma_device *ddev; - struct dma_async_tx_descriptor *tx = NULL; - enum dma_ctrl_flags flags = DMA_PREP_INTERRUPT | DMA_PREP_FENCE; - DECLARE_COMPLETION_ONSTACK(done_wait); - dma_cookie_t cookie; - enum dma_status status; - - if (!chan) { - err = -EIO; - dev_err(&sdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - return err; - } - ddev = chan->device; - - tx = ddev->device_prep_dma_memcpy(chan, 0, 0, 0, flags); - if (!tx) { - err = -ENOMEM; - dev_err(&sdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - goto release; - } - reinit_completion(&done_wait); - tx->callback = scif_dma_callback; - tx->callback_param = &done_wait; - cookie = tx->tx_submit(tx); - - if (dma_submit_error(cookie)) { - err = -ENOMEM; - dev_err(&sdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - goto release; - } - dma_async_issue_pending(chan); - - err = wait_for_completion_timeout(&done_wait, SCIF_DMA_TO); - if (!err) { - err = -EIO; - dev_err(&sdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - goto release; - } - err = 0; - status = dma_async_is_tx_complete(chan, cookie, NULL, NULL); - if (status != DMA_COMPLETE) { - err = -EIO; - dev_err(&sdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - goto release; - } -release: - return err; -} - -/* - * scif_drain_dma_poll - Drain all outstanding DMA operations for a particular - * DMA channel via polling. - * - * @sdev - The SCIF device - * @chan - DMA channel - * Return 0 on success and -errno on error. - */ -static int scif_drain_dma_poll(struct scif_hw_dev *sdev, struct dma_chan *chan) -{ - if (!chan) - return -EINVAL; - return scif_sync_dma(sdev, chan, SCIF_DMA_SYNC_WAIT); -} - -/* - * scif_drain_dma_intr - Drain all outstanding DMA operations for a particular - * DMA channel via interrupt based blocking wait. - * - * @sdev - The SCIF device - * @chan - DMA channel - * Return 0 on success and -errno on error. - */ -int scif_drain_dma_intr(struct scif_hw_dev *sdev, struct dma_chan *chan) -{ - if (!chan) - return -EINVAL; - return scif_async_dma(sdev, chan); -} - -/** - * scif_rma_destroy_windows: - * - * This routine destroys all windows queued for cleanup - */ -void scif_rma_destroy_windows(void) -{ - struct list_head *item, *tmp; - struct scif_window *window; - struct scif_endpt *ep; - struct dma_chan *chan; - - might_sleep(); -restart: - spin_lock(&scif_info.rmalock); - list_for_each_safe(item, tmp, &scif_info.rma) { - window = list_entry(item, struct scif_window, - list); - ep = (struct scif_endpt *)window->ep; - chan = ep->rma_info.dma_chan; - - list_del_init(&window->list); - spin_unlock(&scif_info.rmalock); - if (!chan || !scifdev_alive(ep) || - !scif_drain_dma_intr(ep->remote_dev->sdev, - ep->rma_info.dma_chan)) - /* Remove window from global list */ - window->unreg_state = OP_COMPLETED; - else - dev_warn(&ep->remote_dev->sdev->dev, - "DMA engine hung?\n"); - if (window->unreg_state == OP_COMPLETED) { - if (window->type == SCIF_WINDOW_SELF) - scif_destroy_window(ep, window); - else - scif_destroy_remote_window(window); - atomic_dec(&ep->rma_info.tw_refcount); - } - goto restart; - } - spin_unlock(&scif_info.rmalock); -} - -/** - * scif_rma_destroy_tcw: - * - * This routine destroys temporary cached registered windows - * which have been queued for cleanup. - */ -void scif_rma_destroy_tcw_invalid(void) -{ - struct list_head *item, *tmp; - struct scif_window *window; - struct scif_endpt *ep; - struct dma_chan *chan; - - might_sleep(); -restart: - spin_lock(&scif_info.rmalock); - list_for_each_safe(item, tmp, &scif_info.rma_tc) { - window = list_entry(item, struct scif_window, list); - ep = (struct scif_endpt *)window->ep; - chan = ep->rma_info.dma_chan; - list_del_init(&window->list); - spin_unlock(&scif_info.rmalock); - mutex_lock(&ep->rma_info.rma_lock); - if (!chan || !scifdev_alive(ep) || - !scif_drain_dma_intr(ep->remote_dev->sdev, - ep->rma_info.dma_chan)) { - atomic_sub(window->nr_pages, - &ep->rma_info.tcw_total_pages); - scif_destroy_window(ep, window); - atomic_dec(&ep->rma_info.tcw_refcount); - } else { - dev_warn(&ep->remote_dev->sdev->dev, - "DMA engine hung?\n"); - } - mutex_unlock(&ep->rma_info.rma_lock); - goto restart; - } - spin_unlock(&scif_info.rmalock); -} - -static inline -void *_get_local_va(off_t off, struct scif_window *window, size_t len) -{ - int page_nr = (off - window->offset) >> PAGE_SHIFT; - off_t page_off = off & ~PAGE_MASK; - void *va = NULL; - - if (window->type == SCIF_WINDOW_SELF) { - struct page **pages = window->pinned_pages->pages; - - va = page_address(pages[page_nr]) + page_off; - } - return va; -} - -static inline -void *ioremap_remote(off_t off, struct scif_window *window, - size_t len, struct scif_dev *dev, - struct scif_window_iter *iter) -{ - dma_addr_t phys = scif_off_to_dma_addr(window, off, NULL, iter); - - /* - * If the DMA address is not card relative then we need the DMA - * addresses to be an offset into the bar. The aperture base was already - * added so subtract it here since scif_ioremap is going to add it again - */ - if (!scifdev_self(dev) && window->type == SCIF_WINDOW_PEER && - dev->sdev->aper && !dev->sdev->card_rel_da) - phys = phys - dev->sdev->aper->pa; - return scif_ioremap(phys, len, dev); -} - -static inline void -iounmap_remote(void *virt, size_t size, struct scif_copy_work *work) -{ - scif_iounmap(virt, size, work->remote_dev); -} - -/* - * Takes care of ordering issue caused by - * 1. Hardware: Only in the case of cpu copy from mgmt node to card - * because of WC memory. - * 2. Software: If memcpy reorders copy instructions for optimization. - * This could happen at both mgmt node and card. - */ -static inline void -scif_ordered_memcpy_toio(char *dst, const char *src, size_t count) -{ - if (!count) - return; - - memcpy_toio((void __iomem __force *)dst, src, --count); - /* Order the last byte with the previous stores */ - wmb(); - *(dst + count) = *(src + count); -} - -static inline void scif_unaligned_cpy_toio(char *dst, const char *src, - size_t count, bool ordered) -{ - if (ordered) - scif_ordered_memcpy_toio(dst, src, count); - else - memcpy_toio((void __iomem __force *)dst, src, count); -} - -static inline -void scif_ordered_memcpy_fromio(char *dst, const char *src, size_t count) -{ - if (!count) - return; - - memcpy_fromio(dst, (void __iomem __force *)src, --count); - /* Order the last byte with the previous loads */ - rmb(); - *(dst + count) = *(src + count); -} - -static inline void scif_unaligned_cpy_fromio(char *dst, const char *src, - size_t count, bool ordered) -{ - if (ordered) - scif_ordered_memcpy_fromio(dst, src, count); - else - memcpy_fromio(dst, (void __iomem __force *)src, count); -} - -#define SCIF_RMA_ERROR_CODE (~(dma_addr_t)0x0) - -/* - * scif_off_to_dma_addr: - * Obtain the dma_addr given the window and the offset. - * @window: Registered window. - * @off: Window offset. - * @nr_bytes: Return the number of contiguous bytes till next DMA addr index. - * @index: Return the index of the dma_addr array found. - * @start_off: start offset of index of the dma addr array found. - * The nr_bytes provides the callee an estimate of the maximum possible - * DMA xfer possible while the index/start_off provide faster lookups - * for the next iteration. - */ -dma_addr_t scif_off_to_dma_addr(struct scif_window *window, s64 off, - size_t *nr_bytes, struct scif_window_iter *iter) -{ - int i, page_nr; - s64 start, end; - off_t page_off; - - if (window->nr_pages == window->nr_contig_chunks) { - page_nr = (off - window->offset) >> PAGE_SHIFT; - page_off = off & ~PAGE_MASK; - - if (nr_bytes) - *nr_bytes = PAGE_SIZE - page_off; - return window->dma_addr[page_nr] | page_off; - } - if (iter) { - i = iter->index; - start = iter->offset; - } else { - i = 0; - start = window->offset; - } - for (; i < window->nr_contig_chunks; i++) { - end = start + (window->num_pages[i] << PAGE_SHIFT); - if (off >= start && off < end) { - if (iter) { - iter->index = i; - iter->offset = start; - } - if (nr_bytes) - *nr_bytes = end - off; - return (window->dma_addr[i] + (off - start)); - } - start += (window->num_pages[i] << PAGE_SHIFT); - } - dev_err(scif_info.mdev.this_device, - "%s %d BUG. Addr not found? window %p off 0x%llx\n", - __func__, __LINE__, window, off); - return SCIF_RMA_ERROR_CODE; -} - -/* - * Copy between rma window and temporary buffer - */ -static void scif_rma_local_cpu_copy(s64 offset, struct scif_window *window, - u8 *temp, size_t rem_len, bool to_temp) -{ - void *window_virt; - size_t loop_len; - int offset_in_page; - s64 end_offset; - - offset_in_page = offset & ~PAGE_MASK; - loop_len = PAGE_SIZE - offset_in_page; - - if (rem_len < loop_len) - loop_len = rem_len; - - window_virt = _get_local_va(offset, window, loop_len); - if (!window_virt) - return; - if (to_temp) - memcpy(temp, window_virt, loop_len); - else - memcpy(window_virt, temp, loop_len); - - offset += loop_len; - temp += loop_len; - rem_len -= loop_len; - - end_offset = window->offset + - (window->nr_pages << PAGE_SHIFT); - while (rem_len) { - if (offset == end_offset) { - window = list_next_entry(window, list); - end_offset = window->offset + - (window->nr_pages << PAGE_SHIFT); - } - loop_len = min(PAGE_SIZE, rem_len); - window_virt = _get_local_va(offset, window, loop_len); - if (!window_virt) - return; - if (to_temp) - memcpy(temp, window_virt, loop_len); - else - memcpy(window_virt, temp, loop_len); - offset += loop_len; - temp += loop_len; - rem_len -= loop_len; - } -} - -/** - * scif_rma_completion_cb: - * @data: RMA cookie - * - * RMA interrupt completion callback. - */ -static void scif_rma_completion_cb(void *data) -{ - struct scif_dma_comp_cb *comp_cb = data; - - /* Free DMA Completion CB. */ - if (comp_cb->dst_window) - scif_rma_local_cpu_copy(comp_cb->dst_offset, - comp_cb->dst_window, - comp_cb->temp_buf + - comp_cb->header_padding, - comp_cb->len, false); - scif_unmap_single(comp_cb->temp_phys, comp_cb->sdev, - SCIF_KMEM_UNALIGNED_BUF_SIZE); - if (comp_cb->is_cache) - kmem_cache_free(unaligned_cache, - comp_cb->temp_buf_to_free); - else - kfree(comp_cb->temp_buf_to_free); -} - -/* Copies between temporary buffer and offsets provided in work */ -static int -scif_rma_list_dma_copy_unaligned(struct scif_copy_work *work, - u8 *temp, struct dma_chan *chan, - bool src_local) -{ - struct scif_dma_comp_cb *comp_cb = work->comp_cb; - dma_addr_t window_dma_addr, temp_dma_addr; - dma_addr_t temp_phys = comp_cb->temp_phys; - size_t loop_len, nr_contig_bytes = 0, remaining_len = work->len; - int offset_in_ca, ret = 0; - s64 end_offset, offset; - struct scif_window *window; - void *window_virt_addr; - size_t tail_len; - struct dma_async_tx_descriptor *tx; - struct dma_device *dev = chan->device; - dma_cookie_t cookie; - - if (src_local) { - offset = work->dst_offset; - window = work->dst_window; - } else { - offset = work->src_offset; - window = work->src_window; - } - - offset_in_ca = offset & (L1_CACHE_BYTES - 1); - if (offset_in_ca) { - loop_len = L1_CACHE_BYTES - offset_in_ca; - loop_len = min(loop_len, remaining_len); - window_virt_addr = ioremap_remote(offset, window, - loop_len, - work->remote_dev, - NULL); - if (!window_virt_addr) - return -ENOMEM; - if (src_local) - scif_unaligned_cpy_toio(window_virt_addr, temp, - loop_len, - work->ordered && - !(remaining_len - loop_len)); - else - scif_unaligned_cpy_fromio(temp, window_virt_addr, - loop_len, work->ordered && - !(remaining_len - loop_len)); - iounmap_remote(window_virt_addr, loop_len, work); - - offset += loop_len; - temp += loop_len; - temp_phys += loop_len; - remaining_len -= loop_len; - } - - offset_in_ca = offset & ~PAGE_MASK; - end_offset = window->offset + - (window->nr_pages << PAGE_SHIFT); - - tail_len = remaining_len & (L1_CACHE_BYTES - 1); - remaining_len -= tail_len; - while (remaining_len) { - if (offset == end_offset) { - window = list_next_entry(window, list); - end_offset = window->offset + - (window->nr_pages << PAGE_SHIFT); - } - if (scif_is_mgmt_node()) - temp_dma_addr = temp_phys; - else - /* Fix if we ever enable IOMMU on the card */ - temp_dma_addr = (dma_addr_t)virt_to_phys(temp); - window_dma_addr = scif_off_to_dma_addr(window, offset, - &nr_contig_bytes, - NULL); - loop_len = min(nr_contig_bytes, remaining_len); - if (src_local) { - if (work->ordered && !tail_len && - !(remaining_len - loop_len) && - loop_len != L1_CACHE_BYTES) { - /* - * Break up the last chunk of the transfer into - * two steps. if there is no tail to guarantee - * DMA ordering. SCIF_DMA_POLLING inserts - * a status update descriptor in step 1 which - * acts as a double sided synchronization fence - * for the DMA engine to ensure that the last - * cache line in step 2 is updated last. - */ - /* Step 1) DMA: Body Length - L1_CACHE_BYTES. */ - tx = - dev->device_prep_dma_memcpy(chan, - window_dma_addr, - temp_dma_addr, - loop_len - - L1_CACHE_BYTES, - DMA_PREP_FENCE); - if (!tx) { - ret = -ENOMEM; - goto err; - } - cookie = tx->tx_submit(tx); - if (dma_submit_error(cookie)) { - ret = -ENOMEM; - goto err; - } - dma_async_issue_pending(chan); - offset += (loop_len - L1_CACHE_BYTES); - temp_dma_addr += (loop_len - L1_CACHE_BYTES); - window_dma_addr += (loop_len - L1_CACHE_BYTES); - remaining_len -= (loop_len - L1_CACHE_BYTES); - loop_len = remaining_len; - - /* Step 2) DMA: L1_CACHE_BYTES */ - tx = - dev->device_prep_dma_memcpy(chan, - window_dma_addr, - temp_dma_addr, - loop_len, 0); - if (!tx) { - ret = -ENOMEM; - goto err; - } - cookie = tx->tx_submit(tx); - if (dma_submit_error(cookie)) { - ret = -ENOMEM; - goto err; - } - dma_async_issue_pending(chan); - } else { - tx = - dev->device_prep_dma_memcpy(chan, - window_dma_addr, - temp_dma_addr, - loop_len, 0); - if (!tx) { - ret = -ENOMEM; - goto err; - } - cookie = tx->tx_submit(tx); - if (dma_submit_error(cookie)) { - ret = -ENOMEM; - goto err; - } - dma_async_issue_pending(chan); - } - } else { - tx = dev->device_prep_dma_memcpy(chan, temp_dma_addr, - window_dma_addr, loop_len, 0); - if (!tx) { - ret = -ENOMEM; - goto err; - } - cookie = tx->tx_submit(tx); - if (dma_submit_error(cookie)) { - ret = -ENOMEM; - goto err; - } - dma_async_issue_pending(chan); - } - offset += loop_len; - temp += loop_len; - temp_phys += loop_len; - remaining_len -= loop_len; - offset_in_ca = 0; - } - if (tail_len) { - if (offset == end_offset) { - window = list_next_entry(window, list); - end_offset = window->offset + - (window->nr_pages << PAGE_SHIFT); - } - window_virt_addr = ioremap_remote(offset, window, tail_len, - work->remote_dev, - NULL); - if (!window_virt_addr) - return -ENOMEM; - /* - * The CPU copy for the tail bytes must be initiated only once - * previous DMA transfers for this endpoint have completed - * to guarantee ordering. - */ - if (work->ordered) { - struct scif_dev *rdev = work->remote_dev; - - ret = scif_drain_dma_intr(rdev->sdev, chan); - if (ret) - return ret; - } - if (src_local) - scif_unaligned_cpy_toio(window_virt_addr, temp, - tail_len, work->ordered); - else - scif_unaligned_cpy_fromio(temp, window_virt_addr, - tail_len, work->ordered); - iounmap_remote(window_virt_addr, tail_len, work); - } - tx = dev->device_prep_dma_memcpy(chan, 0, 0, 0, DMA_PREP_INTERRUPT); - if (!tx) { - ret = -ENOMEM; - return ret; - } - tx->callback = &scif_rma_completion_cb; - tx->callback_param = comp_cb; - cookie = tx->tx_submit(tx); - - if (dma_submit_error(cookie)) { - ret = -ENOMEM; - return ret; - } - dma_async_issue_pending(chan); - return 0; -err: - dev_err(scif_info.mdev.this_device, - "%s %d Desc Prog Failed ret %d\n", - __func__, __LINE__, ret); - return ret; -} - -/* - * _scif_rma_list_dma_copy_aligned: - * - * Traverse all the windows and perform DMA copy. - */ -static int _scif_rma_list_dma_copy_aligned(struct scif_copy_work *work, - struct dma_chan *chan) -{ - dma_addr_t src_dma_addr, dst_dma_addr; - size_t loop_len, remaining_len, src_contig_bytes = 0; - size_t dst_contig_bytes = 0; - struct scif_window_iter src_win_iter; - struct scif_window_iter dst_win_iter; - s64 end_src_offset, end_dst_offset; - struct scif_window *src_window = work->src_window; - struct scif_window *dst_window = work->dst_window; - s64 src_offset = work->src_offset, dst_offset = work->dst_offset; - int ret = 0; - struct dma_async_tx_descriptor *tx; - struct dma_device *dev = chan->device; - dma_cookie_t cookie; - - remaining_len = work->len; - - scif_init_window_iter(src_window, &src_win_iter); - scif_init_window_iter(dst_window, &dst_win_iter); - end_src_offset = src_window->offset + - (src_window->nr_pages << PAGE_SHIFT); - end_dst_offset = dst_window->offset + - (dst_window->nr_pages << PAGE_SHIFT); - while (remaining_len) { - if (src_offset == end_src_offset) { - src_window = list_next_entry(src_window, list); - end_src_offset = src_window->offset + - (src_window->nr_pages << PAGE_SHIFT); - scif_init_window_iter(src_window, &src_win_iter); - } - if (dst_offset == end_dst_offset) { - dst_window = list_next_entry(dst_window, list); - end_dst_offset = dst_window->offset + - (dst_window->nr_pages << PAGE_SHIFT); - scif_init_window_iter(dst_window, &dst_win_iter); - } - - /* compute dma addresses for transfer */ - src_dma_addr = scif_off_to_dma_addr(src_window, src_offset, - &src_contig_bytes, - &src_win_iter); - dst_dma_addr = scif_off_to_dma_addr(dst_window, dst_offset, - &dst_contig_bytes, - &dst_win_iter); - loop_len = min(src_contig_bytes, dst_contig_bytes); - loop_len = min(loop_len, remaining_len); - if (work->ordered && !(remaining_len - loop_len)) { - /* - * Break up the last chunk of the transfer into two - * steps to ensure that the last byte in step 2 is - * updated last. - */ - /* Step 1) DMA: Body Length - 1 */ - tx = dev->device_prep_dma_memcpy(chan, dst_dma_addr, - src_dma_addr, - loop_len - 1, - DMA_PREP_FENCE); - if (!tx) { - ret = -ENOMEM; - goto err; - } - cookie = tx->tx_submit(tx); - if (dma_submit_error(cookie)) { - ret = -ENOMEM; - goto err; - } - src_offset += (loop_len - 1); - dst_offset += (loop_len - 1); - src_dma_addr += (loop_len - 1); - dst_dma_addr += (loop_len - 1); - remaining_len -= (loop_len - 1); - loop_len = remaining_len; - - /* Step 2) DMA: 1 BYTES */ - tx = dev->device_prep_dma_memcpy(chan, dst_dma_addr, - src_dma_addr, loop_len, 0); - if (!tx) { - ret = -ENOMEM; - goto err; - } - cookie = tx->tx_submit(tx); - if (dma_submit_error(cookie)) { - ret = -ENOMEM; - goto err; - } - dma_async_issue_pending(chan); - } else { - tx = dev->device_prep_dma_memcpy(chan, dst_dma_addr, - src_dma_addr, loop_len, 0); - if (!tx) { - ret = -ENOMEM; - goto err; - } - cookie = tx->tx_submit(tx); - if (dma_submit_error(cookie)) { - ret = -ENOMEM; - goto err; - } - } - src_offset += loop_len; - dst_offset += loop_len; - remaining_len -= loop_len; - } - return ret; -err: - dev_err(scif_info.mdev.this_device, - "%s %d Desc Prog Failed ret %d\n", - __func__, __LINE__, ret); - return ret; -} - -/* - * scif_rma_list_dma_copy_aligned: - * - * Traverse all the windows and perform DMA copy. - */ -static int scif_rma_list_dma_copy_aligned(struct scif_copy_work *work, - struct dma_chan *chan) -{ - dma_addr_t src_dma_addr, dst_dma_addr; - size_t loop_len, remaining_len, tail_len, src_contig_bytes = 0; - size_t dst_contig_bytes = 0; - int src_cache_off; - s64 end_src_offset, end_dst_offset; - struct scif_window_iter src_win_iter; - struct scif_window_iter dst_win_iter; - void *src_virt, *dst_virt; - struct scif_window *src_window = work->src_window; - struct scif_window *dst_window = work->dst_window; - s64 src_offset = work->src_offset, dst_offset = work->dst_offset; - int ret = 0; - struct dma_async_tx_descriptor *tx; - struct dma_device *dev = chan->device; - dma_cookie_t cookie; - - remaining_len = work->len; - scif_init_window_iter(src_window, &src_win_iter); - scif_init_window_iter(dst_window, &dst_win_iter); - - src_cache_off = src_offset & (L1_CACHE_BYTES - 1); - if (src_cache_off != 0) { - /* Head */ - loop_len = L1_CACHE_BYTES - src_cache_off; - loop_len = min(loop_len, remaining_len); - src_dma_addr = __scif_off_to_dma_addr(src_window, src_offset); - dst_dma_addr = __scif_off_to_dma_addr(dst_window, dst_offset); - if (src_window->type == SCIF_WINDOW_SELF) - src_virt = _get_local_va(src_offset, src_window, - loop_len); - else - src_virt = ioremap_remote(src_offset, src_window, - loop_len, - work->remote_dev, NULL); - if (!src_virt) - return -ENOMEM; - if (dst_window->type == SCIF_WINDOW_SELF) - dst_virt = _get_local_va(dst_offset, dst_window, - loop_len); - else - dst_virt = ioremap_remote(dst_offset, dst_window, - loop_len, - work->remote_dev, NULL); - if (!dst_virt) { - if (src_window->type != SCIF_WINDOW_SELF) - iounmap_remote(src_virt, loop_len, work); - return -ENOMEM; - } - if (src_window->type == SCIF_WINDOW_SELF) - scif_unaligned_cpy_toio(dst_virt, src_virt, loop_len, - remaining_len == loop_len ? - work->ordered : false); - else - scif_unaligned_cpy_fromio(dst_virt, src_virt, loop_len, - remaining_len == loop_len ? - work->ordered : false); - if (src_window->type != SCIF_WINDOW_SELF) - iounmap_remote(src_virt, loop_len, work); - if (dst_window->type != SCIF_WINDOW_SELF) - iounmap_remote(dst_virt, loop_len, work); - src_offset += loop_len; - dst_offset += loop_len; - remaining_len -= loop_len; - } - - end_src_offset = src_window->offset + - (src_window->nr_pages << PAGE_SHIFT); - end_dst_offset = dst_window->offset + - (dst_window->nr_pages << PAGE_SHIFT); - tail_len = remaining_len & (L1_CACHE_BYTES - 1); - remaining_len -= tail_len; - while (remaining_len) { - if (src_offset == end_src_offset) { - src_window = list_next_entry(src_window, list); - end_src_offset = src_window->offset + - (src_window->nr_pages << PAGE_SHIFT); - scif_init_window_iter(src_window, &src_win_iter); - } - if (dst_offset == end_dst_offset) { - dst_window = list_next_entry(dst_window, list); - end_dst_offset = dst_window->offset + - (dst_window->nr_pages << PAGE_SHIFT); - scif_init_window_iter(dst_window, &dst_win_iter); - } - - /* compute dma addresses for transfer */ - src_dma_addr = scif_off_to_dma_addr(src_window, src_offset, - &src_contig_bytes, - &src_win_iter); - dst_dma_addr = scif_off_to_dma_addr(dst_window, dst_offset, - &dst_contig_bytes, - &dst_win_iter); - loop_len = min(src_contig_bytes, dst_contig_bytes); - loop_len = min(loop_len, remaining_len); - if (work->ordered && !tail_len && - !(remaining_len - loop_len)) { - /* - * Break up the last chunk of the transfer into two - * steps. if there is no tail to gurantee DMA ordering. - * Passing SCIF_DMA_POLLING inserts a status update - * descriptor in step 1 which acts as a double sided - * synchronization fence for the DMA engine to ensure - * that the last cache line in step 2 is updated last. - */ - /* Step 1) DMA: Body Length - L1_CACHE_BYTES. */ - tx = dev->device_prep_dma_memcpy(chan, dst_dma_addr, - src_dma_addr, - loop_len - - L1_CACHE_BYTES, - DMA_PREP_FENCE); - if (!tx) { - ret = -ENOMEM; - goto err; - } - cookie = tx->tx_submit(tx); - if (dma_submit_error(cookie)) { - ret = -ENOMEM; - goto err; - } - dma_async_issue_pending(chan); - src_offset += (loop_len - L1_CACHE_BYTES); - dst_offset += (loop_len - L1_CACHE_BYTES); - src_dma_addr += (loop_len - L1_CACHE_BYTES); - dst_dma_addr += (loop_len - L1_CACHE_BYTES); - remaining_len -= (loop_len - L1_CACHE_BYTES); - loop_len = remaining_len; - - /* Step 2) DMA: L1_CACHE_BYTES */ - tx = dev->device_prep_dma_memcpy(chan, dst_dma_addr, - src_dma_addr, - loop_len, 0); - if (!tx) { - ret = -ENOMEM; - goto err; - } - cookie = tx->tx_submit(tx); - if (dma_submit_error(cookie)) { - ret = -ENOMEM; - goto err; - } - dma_async_issue_pending(chan); - } else { - tx = dev->device_prep_dma_memcpy(chan, dst_dma_addr, - src_dma_addr, - loop_len, 0); - if (!tx) { - ret = -ENOMEM; - goto err; - } - cookie = tx->tx_submit(tx); - if (dma_submit_error(cookie)) { - ret = -ENOMEM; - goto err; - } - dma_async_issue_pending(chan); - } - src_offset += loop_len; - dst_offset += loop_len; - remaining_len -= loop_len; - } - remaining_len = tail_len; - if (remaining_len) { - loop_len = remaining_len; - if (src_offset == end_src_offset) - src_window = list_next_entry(src_window, list); - if (dst_offset == end_dst_offset) - dst_window = list_next_entry(dst_window, list); - - src_dma_addr = __scif_off_to_dma_addr(src_window, src_offset); - dst_dma_addr = __scif_off_to_dma_addr(dst_window, dst_offset); - /* - * The CPU copy for the tail bytes must be initiated only once - * previous DMA transfers for this endpoint have completed to - * guarantee ordering. - */ - if (work->ordered) { - struct scif_dev *rdev = work->remote_dev; - - ret = scif_drain_dma_poll(rdev->sdev, chan); - if (ret) - return ret; - } - if (src_window->type == SCIF_WINDOW_SELF) - src_virt = _get_local_va(src_offset, src_window, - loop_len); - else - src_virt = ioremap_remote(src_offset, src_window, - loop_len, - work->remote_dev, NULL); - if (!src_virt) - return -ENOMEM; - - if (dst_window->type == SCIF_WINDOW_SELF) - dst_virt = _get_local_va(dst_offset, dst_window, - loop_len); - else - dst_virt = ioremap_remote(dst_offset, dst_window, - loop_len, - work->remote_dev, NULL); - if (!dst_virt) { - if (src_window->type != SCIF_WINDOW_SELF) - iounmap_remote(src_virt, loop_len, work); - return -ENOMEM; - } - - if (src_window->type == SCIF_WINDOW_SELF) - scif_unaligned_cpy_toio(dst_virt, src_virt, loop_len, - work->ordered); - else - scif_unaligned_cpy_fromio(dst_virt, src_virt, - loop_len, work->ordered); - if (src_window->type != SCIF_WINDOW_SELF) - iounmap_remote(src_virt, loop_len, work); - - if (dst_window->type != SCIF_WINDOW_SELF) - iounmap_remote(dst_virt, loop_len, work); - remaining_len -= loop_len; - } - return ret; -err: - dev_err(scif_info.mdev.this_device, - "%s %d Desc Prog Failed ret %d\n", - __func__, __LINE__, ret); - return ret; -} - -/* - * scif_rma_list_cpu_copy: - * - * Traverse all the windows and perform CPU copy. - */ -static int scif_rma_list_cpu_copy(struct scif_copy_work *work) -{ - void *src_virt, *dst_virt; - size_t loop_len, remaining_len; - int src_page_off, dst_page_off; - s64 src_offset = work->src_offset, dst_offset = work->dst_offset; - struct scif_window *src_window = work->src_window; - struct scif_window *dst_window = work->dst_window; - s64 end_src_offset, end_dst_offset; - int ret = 0; - struct scif_window_iter src_win_iter; - struct scif_window_iter dst_win_iter; - - remaining_len = work->len; - - scif_init_window_iter(src_window, &src_win_iter); - scif_init_window_iter(dst_window, &dst_win_iter); - while (remaining_len) { - src_page_off = src_offset & ~PAGE_MASK; - dst_page_off = dst_offset & ~PAGE_MASK; - loop_len = min(PAGE_SIZE - - max(src_page_off, dst_page_off), - remaining_len); - - if (src_window->type == SCIF_WINDOW_SELF) - src_virt = _get_local_va(src_offset, src_window, - loop_len); - else - src_virt = ioremap_remote(src_offset, src_window, - loop_len, - work->remote_dev, - &src_win_iter); - if (!src_virt) { - ret = -ENOMEM; - goto error; - } - - if (dst_window->type == SCIF_WINDOW_SELF) - dst_virt = _get_local_va(dst_offset, dst_window, - loop_len); - else - dst_virt = ioremap_remote(dst_offset, dst_window, - loop_len, - work->remote_dev, - &dst_win_iter); - if (!dst_virt) { - if (src_window->type == SCIF_WINDOW_PEER) - iounmap_remote(src_virt, loop_len, work); - ret = -ENOMEM; - goto error; - } - - if (work->loopback) { - memcpy(dst_virt, src_virt, loop_len); - } else { - if (src_window->type == SCIF_WINDOW_SELF) - memcpy_toio((void __iomem __force *)dst_virt, - src_virt, loop_len); - else - memcpy_fromio(dst_virt, - (void __iomem __force *)src_virt, - loop_len); - } - if (src_window->type == SCIF_WINDOW_PEER) - iounmap_remote(src_virt, loop_len, work); - - if (dst_window->type == SCIF_WINDOW_PEER) - iounmap_remote(dst_virt, loop_len, work); - - src_offset += loop_len; - dst_offset += loop_len; - remaining_len -= loop_len; - if (remaining_len) { - end_src_offset = src_window->offset + - (src_window->nr_pages << PAGE_SHIFT); - end_dst_offset = dst_window->offset + - (dst_window->nr_pages << PAGE_SHIFT); - if (src_offset == end_src_offset) { - src_window = list_next_entry(src_window, list); - scif_init_window_iter(src_window, - &src_win_iter); - } - if (dst_offset == end_dst_offset) { - dst_window = list_next_entry(dst_window, list); - scif_init_window_iter(dst_window, - &dst_win_iter); - } - } - } -error: - return ret; -} - -static int scif_rma_list_dma_copy_wrapper(struct scif_endpt *epd, - struct scif_copy_work *work, - struct dma_chan *chan, off_t loffset) -{ - int src_cache_off, dst_cache_off; - s64 src_offset = work->src_offset, dst_offset = work->dst_offset; - u8 *temp = NULL; - bool src_local = true; - struct scif_dma_comp_cb *comp_cb; - int err; - - if (is_dma_copy_aligned(chan->device, 1, 1, 1)) - return _scif_rma_list_dma_copy_aligned(work, chan); - - src_cache_off = src_offset & (L1_CACHE_BYTES - 1); - dst_cache_off = dst_offset & (L1_CACHE_BYTES - 1); - - if (dst_cache_off == src_cache_off) - return scif_rma_list_dma_copy_aligned(work, chan); - - if (work->loopback) - return scif_rma_list_cpu_copy(work); - src_local = work->src_window->type == SCIF_WINDOW_SELF; - - /* Allocate dma_completion cb */ - comp_cb = kzalloc(sizeof(*comp_cb), GFP_KERNEL); - if (!comp_cb) - goto error; - - work->comp_cb = comp_cb; - comp_cb->cb_cookie = comp_cb; - comp_cb->dma_completion_func = &scif_rma_completion_cb; - - if (work->len + (L1_CACHE_BYTES << 1) < SCIF_KMEM_UNALIGNED_BUF_SIZE) { - comp_cb->is_cache = false; - /* Allocate padding bytes to align to a cache line */ - temp = kmalloc(work->len + (L1_CACHE_BYTES << 1), - GFP_KERNEL); - if (!temp) - goto free_comp_cb; - comp_cb->temp_buf_to_free = temp; - /* kmalloc(..) does not guarantee cache line alignment */ - if (!IS_ALIGNED((u64)temp, L1_CACHE_BYTES)) - temp = PTR_ALIGN(temp, L1_CACHE_BYTES); - } else { - comp_cb->is_cache = true; - temp = kmem_cache_alloc(unaligned_cache, GFP_KERNEL); - if (!temp) - goto free_comp_cb; - comp_cb->temp_buf_to_free = temp; - } - - if (src_local) { - temp += dst_cache_off; - scif_rma_local_cpu_copy(work->src_offset, work->src_window, - temp, work->len, true); - } else { - comp_cb->dst_window = work->dst_window; - comp_cb->dst_offset = work->dst_offset; - work->src_offset = work->src_offset - src_cache_off; - comp_cb->len = work->len; - work->len = ALIGN(work->len + src_cache_off, L1_CACHE_BYTES); - comp_cb->header_padding = src_cache_off; - } - comp_cb->temp_buf = temp; - - err = scif_map_single(&comp_cb->temp_phys, temp, - work->remote_dev, SCIF_KMEM_UNALIGNED_BUF_SIZE); - if (err) - goto free_temp_buf; - comp_cb->sdev = work->remote_dev; - if (scif_rma_list_dma_copy_unaligned(work, temp, chan, src_local) < 0) - goto free_temp_buf; - if (!src_local) - work->fence_type = SCIF_DMA_INTR; - return 0; -free_temp_buf: - if (comp_cb->is_cache) - kmem_cache_free(unaligned_cache, comp_cb->temp_buf_to_free); - else - kfree(comp_cb->temp_buf_to_free); -free_comp_cb: - kfree(comp_cb); -error: - return -ENOMEM; -} - -/** - * scif_rma_copy: - * @epd: end point descriptor. - * @loffset: offset in local registered address space to/from which to copy - * @addr: user virtual address to/from which to copy - * @len: length of range to copy - * @roffset: offset in remote registered address space to/from which to copy - * @flags: flags - * @dir: LOCAL->REMOTE or vice versa. - * @last_chunk: true if this is the last chunk of a larger transfer - * - * Validate parameters, check if src/dst registered ranges requested for copy - * are valid and initiate either CPU or DMA copy. - */ -static int scif_rma_copy(scif_epd_t epd, off_t loffset, unsigned long addr, - size_t len, off_t roffset, int flags, - enum scif_rma_dir dir, bool last_chunk) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - struct scif_rma_req remote_req; - struct scif_rma_req req; - struct scif_window *local_window = NULL; - struct scif_window *remote_window = NULL; - struct scif_copy_work copy_work; - bool loopback; - int err = 0; - struct dma_chan *chan; - struct scif_mmu_notif *mmn = NULL; - bool cache = false; - struct device *spdev; - - err = scif_verify_epd(ep); - if (err) - return err; - - if (flags && !(flags & (SCIF_RMA_USECPU | SCIF_RMA_USECACHE | - SCIF_RMA_SYNC | SCIF_RMA_ORDERED))) - return -EINVAL; - - loopback = scifdev_self(ep->remote_dev) ? true : false; - copy_work.fence_type = ((flags & SCIF_RMA_SYNC) && last_chunk) ? - SCIF_DMA_POLL : 0; - copy_work.ordered = !!((flags & SCIF_RMA_ORDERED) && last_chunk); - - /* Use CPU for Mgmt node <-> Mgmt node copies */ - if (loopback && scif_is_mgmt_node()) { - flags |= SCIF_RMA_USECPU; - copy_work.fence_type = 0x0; - } - - cache = scif_is_set_reg_cache(flags); - - remote_req.out_window = &remote_window; - remote_req.offset = roffset; - remote_req.nr_bytes = len; - /* - * If transfer is from local to remote then the remote window - * must be writeable and vice versa. - */ - remote_req.prot = dir == SCIF_LOCAL_TO_REMOTE ? VM_WRITE : VM_READ; - remote_req.type = SCIF_WINDOW_PARTIAL; - remote_req.head = &ep->rma_info.remote_reg_list; - - spdev = scif_get_peer_dev(ep->remote_dev); - if (IS_ERR(spdev)) { - err = PTR_ERR(spdev); - return err; - } - - if (addr && cache) { - mutex_lock(&ep->rma_info.mmn_lock); - mmn = scif_find_mmu_notifier(current->mm, &ep->rma_info); - if (!mmn) - mmn = scif_add_mmu_notifier(current->mm, ep); - mutex_unlock(&ep->rma_info.mmn_lock); - if (IS_ERR(mmn)) { - scif_put_peer_dev(spdev); - return PTR_ERR(mmn); - } - cache = cache && !scif_rma_tc_can_cache(ep, len); - } - mutex_lock(&ep->rma_info.rma_lock); - if (addr) { - req.out_window = &local_window; - req.nr_bytes = ALIGN(len + (addr & ~PAGE_MASK), - PAGE_SIZE); - req.va_for_temp = addr & PAGE_MASK; - req.prot = (dir == SCIF_LOCAL_TO_REMOTE ? - VM_READ : VM_WRITE | VM_READ); - /* Does a valid local window exist? */ - if (mmn) { - spin_lock(&ep->rma_info.tc_lock); - req.head = &mmn->tc_reg_list; - err = scif_query_tcw(ep, &req); - spin_unlock(&ep->rma_info.tc_lock); - } - if (!mmn || err) { - err = scif_register_temp(epd, req.va_for_temp, - req.nr_bytes, req.prot, - &loffset, &local_window); - if (err) { - mutex_unlock(&ep->rma_info.rma_lock); - goto error; - } - if (!cache) - goto skip_cache; - atomic_inc(&ep->rma_info.tcw_refcount); - atomic_add_return(local_window->nr_pages, - &ep->rma_info.tcw_total_pages); - if (mmn) { - spin_lock(&ep->rma_info.tc_lock); - scif_insert_tcw(local_window, - &mmn->tc_reg_list); - spin_unlock(&ep->rma_info.tc_lock); - } - } -skip_cache: - loffset = local_window->offset + - (addr - local_window->va_for_temp); - } else { - req.out_window = &local_window; - req.offset = loffset; - /* - * If transfer is from local to remote then the self window - * must be readable and vice versa. - */ - req.prot = dir == SCIF_LOCAL_TO_REMOTE ? VM_READ : VM_WRITE; - req.nr_bytes = len; - req.type = SCIF_WINDOW_PARTIAL; - req.head = &ep->rma_info.reg_list; - /* Does a valid local window exist? */ - err = scif_query_window(&req); - if (err) { - mutex_unlock(&ep->rma_info.rma_lock); - goto error; - } - } - - /* Does a valid remote window exist? */ - err = scif_query_window(&remote_req); - if (err) { - mutex_unlock(&ep->rma_info.rma_lock); - goto error; - } - - /* - * Prepare copy_work for submitting work to the DMA kernel thread - * or CPU copy routine. - */ - copy_work.len = len; - copy_work.loopback = loopback; - copy_work.remote_dev = ep->remote_dev; - if (dir == SCIF_LOCAL_TO_REMOTE) { - copy_work.src_offset = loffset; - copy_work.src_window = local_window; - copy_work.dst_offset = roffset; - copy_work.dst_window = remote_window; - } else { - copy_work.src_offset = roffset; - copy_work.src_window = remote_window; - copy_work.dst_offset = loffset; - copy_work.dst_window = local_window; - } - - if (flags & SCIF_RMA_USECPU) { - scif_rma_list_cpu_copy(©_work); - } else { - chan = ep->rma_info.dma_chan; - err = scif_rma_list_dma_copy_wrapper(epd, ©_work, - chan, loffset); - } - if (addr && !cache) - atomic_inc(&ep->rma_info.tw_refcount); - - mutex_unlock(&ep->rma_info.rma_lock); - - if (last_chunk) { - struct scif_dev *rdev = ep->remote_dev; - - if (copy_work.fence_type == SCIF_DMA_POLL) - err = scif_drain_dma_poll(rdev->sdev, - ep->rma_info.dma_chan); - else if (copy_work.fence_type == SCIF_DMA_INTR) - err = scif_drain_dma_intr(rdev->sdev, - ep->rma_info.dma_chan); - } - - if (addr && !cache) - scif_queue_for_cleanup(local_window, &scif_info.rma); - scif_put_peer_dev(spdev); - return err; -error: - if (err) { - if (addr && local_window && !cache) - scif_destroy_window(ep, local_window); - dev_err(scif_info.mdev.this_device, - "%s %d err %d len 0x%lx\n", - __func__, __LINE__, err, len); - } - scif_put_peer_dev(spdev); - return err; -} - -int scif_readfrom(scif_epd_t epd, off_t loffset, size_t len, - off_t roffset, int flags) -{ - int err; - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI readfrom: ep %p loffset 0x%lx len 0x%lx offset 0x%lx flags 0x%x\n", - epd, loffset, len, roffset, flags); - if (scif_unaligned(loffset, roffset)) { - while (len > SCIF_MAX_UNALIGNED_BUF_SIZE) { - err = scif_rma_copy(epd, loffset, 0x0, - SCIF_MAX_UNALIGNED_BUF_SIZE, - roffset, flags, - SCIF_REMOTE_TO_LOCAL, false); - if (err) - goto readfrom_err; - loffset += SCIF_MAX_UNALIGNED_BUF_SIZE; - roffset += SCIF_MAX_UNALIGNED_BUF_SIZE; - len -= SCIF_MAX_UNALIGNED_BUF_SIZE; - } - } - err = scif_rma_copy(epd, loffset, 0x0, len, - roffset, flags, SCIF_REMOTE_TO_LOCAL, true); -readfrom_err: - return err; -} -EXPORT_SYMBOL_GPL(scif_readfrom); - -int scif_writeto(scif_epd_t epd, off_t loffset, size_t len, - off_t roffset, int flags) -{ - int err; - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI writeto: ep %p loffset 0x%lx len 0x%lx roffset 0x%lx flags 0x%x\n", - epd, loffset, len, roffset, flags); - if (scif_unaligned(loffset, roffset)) { - while (len > SCIF_MAX_UNALIGNED_BUF_SIZE) { - err = scif_rma_copy(epd, loffset, 0x0, - SCIF_MAX_UNALIGNED_BUF_SIZE, - roffset, flags, - SCIF_LOCAL_TO_REMOTE, false); - if (err) - goto writeto_err; - loffset += SCIF_MAX_UNALIGNED_BUF_SIZE; - roffset += SCIF_MAX_UNALIGNED_BUF_SIZE; - len -= SCIF_MAX_UNALIGNED_BUF_SIZE; - } - } - err = scif_rma_copy(epd, loffset, 0x0, len, - roffset, flags, SCIF_LOCAL_TO_REMOTE, true); -writeto_err: - return err; -} -EXPORT_SYMBOL_GPL(scif_writeto); - -int scif_vreadfrom(scif_epd_t epd, void *addr, size_t len, - off_t roffset, int flags) -{ - int err; - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI vreadfrom: ep %p addr %p len 0x%lx roffset 0x%lx flags 0x%x\n", - epd, addr, len, roffset, flags); - if (scif_unaligned((off_t __force)addr, roffset)) { - if (len > SCIF_MAX_UNALIGNED_BUF_SIZE) - flags &= ~SCIF_RMA_USECACHE; - - while (len > SCIF_MAX_UNALIGNED_BUF_SIZE) { - err = scif_rma_copy(epd, 0, (u64)addr, - SCIF_MAX_UNALIGNED_BUF_SIZE, - roffset, flags, - SCIF_REMOTE_TO_LOCAL, false); - if (err) - goto vreadfrom_err; - addr += SCIF_MAX_UNALIGNED_BUF_SIZE; - roffset += SCIF_MAX_UNALIGNED_BUF_SIZE; - len -= SCIF_MAX_UNALIGNED_BUF_SIZE; - } - } - err = scif_rma_copy(epd, 0, (u64)addr, len, - roffset, flags, SCIF_REMOTE_TO_LOCAL, true); -vreadfrom_err: - return err; -} -EXPORT_SYMBOL_GPL(scif_vreadfrom); - -int scif_vwriteto(scif_epd_t epd, void *addr, size_t len, - off_t roffset, int flags) -{ - int err; - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI vwriteto: ep %p addr %p len 0x%lx roffset 0x%lx flags 0x%x\n", - epd, addr, len, roffset, flags); - if (scif_unaligned((off_t __force)addr, roffset)) { - if (len > SCIF_MAX_UNALIGNED_BUF_SIZE) - flags &= ~SCIF_RMA_USECACHE; - - while (len > SCIF_MAX_UNALIGNED_BUF_SIZE) { - err = scif_rma_copy(epd, 0, (u64)addr, - SCIF_MAX_UNALIGNED_BUF_SIZE, - roffset, flags, - SCIF_LOCAL_TO_REMOTE, false); - if (err) - goto vwriteto_err; - addr += SCIF_MAX_UNALIGNED_BUF_SIZE; - roffset += SCIF_MAX_UNALIGNED_BUF_SIZE; - len -= SCIF_MAX_UNALIGNED_BUF_SIZE; - } - } - err = scif_rma_copy(epd, 0, (u64)addr, len, - roffset, flags, SCIF_LOCAL_TO_REMOTE, true); -vwriteto_err: - return err; -} -EXPORT_SYMBOL_GPL(scif_vwriteto); diff --git a/drivers/misc/mic/scif/scif_epd.c b/drivers/misc/mic/scif/scif_epd.c deleted file mode 100644 index 426687f6696b..000000000000 --- a/drivers/misc/mic/scif/scif_epd.c +++ /dev/null @@ -1,357 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel SCIF driver. - */ -#include "scif_main.h" -#include "scif_map.h" - -void scif_cleanup_ep_qp(struct scif_endpt *ep) -{ - struct scif_qp *qp = ep->qp_info.qp; - - if (qp->outbound_q.rb_base) { - scif_iounmap((void *)qp->outbound_q.rb_base, - qp->outbound_q.size, ep->remote_dev); - qp->outbound_q.rb_base = NULL; - } - if (qp->remote_qp) { - scif_iounmap((void *)qp->remote_qp, - sizeof(struct scif_qp), ep->remote_dev); - qp->remote_qp = NULL; - } - if (qp->local_qp) { - scif_unmap_single(qp->local_qp, ep->remote_dev, - sizeof(struct scif_qp)); - qp->local_qp = 0x0; - } - if (qp->local_buf) { - scif_unmap_single(qp->local_buf, ep->remote_dev, - SCIF_ENDPT_QP_SIZE); - qp->local_buf = 0; - } -} - -void scif_teardown_ep(void *endpt) -{ - struct scif_endpt *ep = endpt; - struct scif_qp *qp = ep->qp_info.qp; - - if (qp) { - spin_lock(&ep->lock); - scif_cleanup_ep_qp(ep); - spin_unlock(&ep->lock); - kfree(qp->inbound_q.rb_base); - kfree(qp); - } -} - -/* - * Enqueue the endpoint to the zombie list for cleanup. - * The endpoint should not be accessed once this API returns. - */ -void scif_add_epd_to_zombie_list(struct scif_endpt *ep, bool eplock_held) -{ - if (!eplock_held) - mutex_lock(&scif_info.eplock); - spin_lock(&ep->lock); - ep->state = SCIFEP_ZOMBIE; - spin_unlock(&ep->lock); - list_add_tail(&ep->list, &scif_info.zombie); - scif_info.nr_zombies++; - if (!eplock_held) - mutex_unlock(&scif_info.eplock); - schedule_work(&scif_info.misc_work); -} - -static struct scif_endpt *scif_find_listen_ep(u16 port) -{ - struct scif_endpt *ep = NULL; - struct list_head *pos, *tmpq; - - mutex_lock(&scif_info.eplock); - list_for_each_safe(pos, tmpq, &scif_info.listen) { - ep = list_entry(pos, struct scif_endpt, list); - if (ep->port.port == port) { - mutex_unlock(&scif_info.eplock); - return ep; - } - } - mutex_unlock(&scif_info.eplock); - return NULL; -} - -void scif_cleanup_zombie_epd(void) -{ - struct list_head *pos, *tmpq; - struct scif_endpt *ep; - - mutex_lock(&scif_info.eplock); - list_for_each_safe(pos, tmpq, &scif_info.zombie) { - ep = list_entry(pos, struct scif_endpt, list); - if (scif_rma_ep_can_uninit(ep)) { - list_del(pos); - scif_info.nr_zombies--; - put_iova_domain(&ep->rma_info.iovad); - kfree(ep); - } - } - mutex_unlock(&scif_info.eplock); -} - -/** - * scif_cnctreq() - Respond to SCIF_CNCT_REQ interrupt message - * @scifdev: SCIF device - * @msg: Interrupt message - * - * This message is initiated by the remote node to request a connection - * to the local node. This function looks for an end point in the - * listen state on the requested port id. - * - * If it finds a listening port it places the connect request on the - * listening end points queue and wakes up any pending accept calls. - * - * If it does not find a listening end point it sends a connection - * reject message to the remote node. - */ -void scif_cnctreq(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_endpt *ep = NULL; - struct scif_conreq *conreq; - - conreq = kmalloc(sizeof(*conreq), GFP_KERNEL); - if (!conreq) - /* Lack of resources so reject the request. */ - goto conreq_sendrej; - - ep = scif_find_listen_ep(msg->dst.port); - if (!ep) - /* Send reject due to no listening ports */ - goto conreq_sendrej_free; - else - spin_lock(&ep->lock); - - if (ep->backlog <= ep->conreqcnt) { - /* Send reject due to too many pending requests */ - spin_unlock(&ep->lock); - goto conreq_sendrej_free; - } - - conreq->msg = *msg; - list_add_tail(&conreq->list, &ep->conlist); - ep->conreqcnt++; - wake_up_interruptible(&ep->conwq); - spin_unlock(&ep->lock); - return; - -conreq_sendrej_free: - kfree(conreq); -conreq_sendrej: - msg->uop = SCIF_CNCT_REJ; - scif_nodeqp_send(&scif_dev[msg->src.node], msg); -} - -/** - * scif_cnctgnt() - Respond to SCIF_CNCT_GNT interrupt message - * @scifdev: SCIF device - * @msg: Interrupt message - * - * An accept() on the remote node has occurred and sent this message - * to indicate success. Place the end point in the MAPPING state and - * save the remote nodes memory information. Then wake up the connect - * request so it can finish. - */ -void scif_cnctgnt(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_endpt *ep = (struct scif_endpt *)msg->payload[0]; - - spin_lock(&ep->lock); - if (SCIFEP_CONNECTING == ep->state) { - ep->peer.node = msg->src.node; - ep->peer.port = msg->src.port; - ep->qp_info.gnt_pld = msg->payload[1]; - ep->remote_ep = msg->payload[2]; - ep->state = SCIFEP_MAPPING; - - wake_up(&ep->conwq); - } - spin_unlock(&ep->lock); -} - -/** - * scif_cnctgnt_ack() - Respond to SCIF_CNCT_GNTACK interrupt message - * @scifdev: SCIF device - * @msg: Interrupt message - * - * The remote connection request has finished mapping the local memory. - * Place the connection in the connected state and wake up the pending - * accept() call. - */ -void scif_cnctgnt_ack(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_endpt *ep = (struct scif_endpt *)msg->payload[0]; - - mutex_lock(&scif_info.connlock); - spin_lock(&ep->lock); - /* New ep is now connected with all resources set. */ - ep->state = SCIFEP_CONNECTED; - list_add_tail(&ep->list, &scif_info.connected); - wake_up(&ep->conwq); - spin_unlock(&ep->lock); - mutex_unlock(&scif_info.connlock); -} - -/** - * scif_cnctgnt_nack() - Respond to SCIF_CNCT_GNTNACK interrupt message - * @scifdev: SCIF device - * @msg: Interrupt message - * - * The remote connection request failed to map the local memory it was sent. - * Place the end point in the CLOSING state to indicate it and wake up - * the pending accept(); - */ -void scif_cnctgnt_nack(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_endpt *ep = (struct scif_endpt *)msg->payload[0]; - - spin_lock(&ep->lock); - ep->state = SCIFEP_CLOSING; - wake_up(&ep->conwq); - spin_unlock(&ep->lock); -} - -/** - * scif_cnctrej() - Respond to SCIF_CNCT_REJ interrupt message - * @scifdev: SCIF device - * @msg: Interrupt message - * - * The remote end has rejected the connection request. Set the end - * point back to the bound state and wake up the pending connect(). - */ -void scif_cnctrej(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_endpt *ep = (struct scif_endpt *)msg->payload[0]; - - spin_lock(&ep->lock); - if (SCIFEP_CONNECTING == ep->state) { - ep->state = SCIFEP_BOUND; - wake_up(&ep->conwq); - } - spin_unlock(&ep->lock); -} - -/** - * scif_discnct() - Respond to SCIF_DISCNCT interrupt message - * @scifdev: SCIF device - * @msg: Interrupt message - * - * The remote node has indicated close() has been called on its end - * point. Remove the local end point from the connected list, set its - * state to disconnected and ensure accesses to the remote node are - * shutdown. - * - * When all accesses to the remote end have completed then send a - * DISCNT_ACK to indicate it can remove its resources and complete - * the close routine. - */ -void scif_discnct(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_endpt *ep = NULL; - struct scif_endpt *tmpep; - struct list_head *pos, *tmpq; - - mutex_lock(&scif_info.connlock); - list_for_each_safe(pos, tmpq, &scif_info.connected) { - tmpep = list_entry(pos, struct scif_endpt, list); - /* - * The local ep may have sent a disconnect and and been closed - * due to a message response time out. It may have been - * allocated again and formed a new connection so we want to - * check if the remote ep matches - */ - if (((u64)tmpep == msg->payload[1]) && - ((u64)tmpep->remote_ep == msg->payload[0])) { - list_del(pos); - ep = tmpep; - spin_lock(&ep->lock); - break; - } - } - - /* - * If the terminated end is not found then this side started closing - * before the other side sent the disconnect. If so the ep will no - * longer be on the connected list. Regardless the other side - * needs to be acked to let it know close is complete. - */ - if (!ep) { - mutex_unlock(&scif_info.connlock); - goto discnct_ack; - } - - ep->state = SCIFEP_DISCONNECTED; - list_add_tail(&ep->list, &scif_info.disconnected); - - wake_up_interruptible(&ep->sendwq); - wake_up_interruptible(&ep->recvwq); - spin_unlock(&ep->lock); - mutex_unlock(&scif_info.connlock); - -discnct_ack: - msg->uop = SCIF_DISCNT_ACK; - scif_nodeqp_send(&scif_dev[msg->src.node], msg); -} - -/** - * scif_discnct_ack() - Respond to SCIF_DISCNT_ACK interrupt message - * @scifdev: SCIF device - * @msg: Interrupt message - * - * Remote side has indicated it has not more references to local resources - */ -void scif_discnt_ack(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_endpt *ep = (struct scif_endpt *)msg->payload[0]; - - spin_lock(&ep->lock); - ep->state = SCIFEP_DISCONNECTED; - spin_unlock(&ep->lock); - complete(&ep->discon); -} - -/** - * scif_clientsend() - Respond to SCIF_CLIENT_SEND interrupt message - * @scifdev: SCIF device - * @msg: Interrupt message - * - * Remote side is confirming send or receive interrupt handling is complete. - */ -void scif_clientsend(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_endpt *ep = (struct scif_endpt *)msg->payload[0]; - - spin_lock(&ep->lock); - if (SCIFEP_CONNECTED == ep->state) - wake_up_interruptible(&ep->recvwq); - spin_unlock(&ep->lock); -} - -/** - * scif_clientrcvd() - Respond to SCIF_CLIENT_RCVD interrupt message - * @scifdev: SCIF device - * @msg: Interrupt message - * - * Remote side is confirming send or receive interrupt handling is complete. - */ -void scif_clientrcvd(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_endpt *ep = (struct scif_endpt *)msg->payload[0]; - - spin_lock(&ep->lock); - if (SCIFEP_CONNECTED == ep->state) - wake_up_interruptible(&ep->sendwq); - spin_unlock(&ep->lock); -} diff --git a/drivers/misc/mic/scif/scif_epd.h b/drivers/misc/mic/scif/scif_epd.h deleted file mode 100644 index 0b9dfe1cc06c..000000000000 --- a/drivers/misc/mic/scif/scif_epd.h +++ /dev/null @@ -1,200 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel SCIF driver. - */ -#ifndef SCIF_EPD_H -#define SCIF_EPD_H - -#include <linux/delay.h> -#include <linux/scif.h> -#include <linux/scif_ioctl.h> - -#define SCIF_EPLOCK_HELD true - -enum scif_epd_state { - SCIFEP_UNBOUND, - SCIFEP_BOUND, - SCIFEP_LISTENING, - SCIFEP_CONNECTED, - SCIFEP_CONNECTING, - SCIFEP_MAPPING, - SCIFEP_CLOSING, - SCIFEP_CLLISTEN, - SCIFEP_DISCONNECTED, - SCIFEP_ZOMBIE -}; - -/* - * struct scif_conreq - Data structure added to the connection list. - * - * @msg: connection request message received - * @list: link to list of connection requests - */ -struct scif_conreq { - struct scifmsg msg; - struct list_head list; -}; - -/* Size of the RB for the Endpoint QP */ -#define SCIF_ENDPT_QP_SIZE 0x1000 - -/* - * scif_endpt_qp_info - SCIF endpoint queue pair - * - * @qp - Qpair for this endpoint - * @qp_offset - DMA address of the QP - * @gnt_pld - Payload in a SCIF_CNCT_GNT message containing the - * physical address of the remote_qp. - */ -struct scif_endpt_qp_info { - struct scif_qp *qp; - dma_addr_t qp_offset; - dma_addr_t gnt_pld; -}; - -/* - * struct scif_endpt - The SCIF endpoint data structure - * - * @state: end point state - * @lock: lock synchronizing access to endpoint fields like state etc - * @port: self port information - * @peer: peer port information - * @backlog: maximum pending connection requests - * @qp_info: Endpoint QP information for SCIF messaging - * @remote_dev: scifdev used by this endpt to communicate with remote node. - * @remote_ep: remote endpoint - * @conreqcnt: Keep track of number of connection requests. - * @files: Open file information used to match the id passed in with - * the flush routine. - * @conlist: list of connection requests - * @conwq: waitqueue for connection processing - * @discon: completion used during disconnection - * @sendwq: waitqueue used during sending messages - * @recvwq: waitqueue used during message receipt - * @sendlock: Synchronize ordering of messages sent - * @recvlock: Synchronize ordering of messages received - * @list: link to list of various endpoints like connected, listening etc - * @li_accept: pending ACCEPTREG - * @acceptcnt: pending ACCEPTREG cnt - * @liacceptlist: link to listen accept - * @miacceptlist: link to uaccept - * @listenep: associated listen ep - * @conn_work: Non blocking connect work - * @conn_port: Connection port - * @conn_err: Errors during connection - * @conn_async_state: Async connection - * @conn_pend_wq: Used by poll while waiting for incoming connections - * @conn_list: List of async connection requests - * @rma_info: Information for triggering SCIF RMA and DMA operations - * @mmu_list: link to list of MMU notifier cleanup work - * @anon: anonymous file for use in kernel mode scif poll - */ -struct scif_endpt { - enum scif_epd_state state; - spinlock_t lock; - struct scif_port_id port; - struct scif_port_id peer; - int backlog; - struct scif_endpt_qp_info qp_info; - struct scif_dev *remote_dev; - u64 remote_ep; - int conreqcnt; - struct files_struct *files; - struct list_head conlist; - wait_queue_head_t conwq; - struct completion discon; - wait_queue_head_t sendwq; - wait_queue_head_t recvwq; - struct mutex sendlock; - struct mutex recvlock; - struct list_head list; - struct list_head li_accept; - int acceptcnt; - struct list_head liacceptlist; - struct list_head miacceptlist; - struct scif_endpt *listenep; - struct scif_port_id conn_port; - int conn_err; - int conn_async_state; - wait_queue_head_t conn_pend_wq; - struct list_head conn_list; - struct scif_endpt_rma_info rma_info; - struct list_head mmu_list; - struct file *anon; -}; - -static inline int scifdev_alive(struct scif_endpt *ep) -{ - return _scifdev_alive(ep->remote_dev); -} - -/* - * scif_verify_epd: - * ep: SCIF endpoint - * - * Checks several generic error conditions and returns the - * appropriate error. - */ -static inline int scif_verify_epd(struct scif_endpt *ep) -{ - if (ep->state == SCIFEP_DISCONNECTED) - return -ECONNRESET; - - if (ep->state != SCIFEP_CONNECTED) - return -ENOTCONN; - - if (!scifdev_alive(ep)) - return -ENODEV; - - return 0; -} - -static inline int scif_anon_inode_getfile(scif_epd_t epd) -{ - epd->anon = anon_inode_getfile("scif", &scif_anon_fops, NULL, 0); - - return PTR_ERR_OR_ZERO(epd->anon); -} - -static inline void scif_anon_inode_fput(scif_epd_t epd) -{ - if (epd->anon) { - fput(epd->anon); - epd->anon = NULL; - } -} - -void scif_cleanup_zombie_epd(void); -void scif_teardown_ep(void *endpt); -void scif_cleanup_ep_qp(struct scif_endpt *ep); -void scif_add_epd_to_zombie_list(struct scif_endpt *ep, bool eplock_held); -void scif_get_node_info(void); -void scif_send_acks(struct scif_dev *dev); -void scif_conn_handler(struct work_struct *work); -int scif_rsrv_port(u16 port); -void scif_get_port(u16 port); -int scif_get_new_port(void); -void scif_put_port(u16 port); -int scif_user_send(scif_epd_t epd, void __user *msg, int len, int flags); -int scif_user_recv(scif_epd_t epd, void __user *msg, int len, int flags); -void scif_cnctreq(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_cnctgnt(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_cnctgnt_ack(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_cnctgnt_nack(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_cnctrej(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_discnct(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_discnt_ack(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_clientsend(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_clientrcvd(struct scif_dev *scifdev, struct scifmsg *msg); -int __scif_connect(scif_epd_t epd, struct scif_port_id *dst, bool non_block); -int __scif_flush(scif_epd_t epd); -int scif_mmap(struct vm_area_struct *vma, scif_epd_t epd); -__poll_t __scif_pollfd(struct file *f, poll_table *wait, - struct scif_endpt *ep); -int __scif_pin_pages(void *addr, size_t len, int *out_prot, - int map_flags, scif_pinned_pages_t *pages); -#endif /* SCIF_EPD_H */ diff --git a/drivers/misc/mic/scif/scif_fd.c b/drivers/misc/mic/scif/scif_fd.c deleted file mode 100644 index 3f08646cd78a..000000000000 --- a/drivers/misc/mic/scif/scif_fd.c +++ /dev/null @@ -1,462 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel SCIF driver. - */ -#include "scif_main.h" - -static int scif_fdopen(struct inode *inode, struct file *f) -{ - struct scif_endpt *priv = scif_open(); - - if (!priv) - return -ENOMEM; - f->private_data = priv; - return 0; -} - -static int scif_fdclose(struct inode *inode, struct file *f) -{ - struct scif_endpt *priv = f->private_data; - - return scif_close(priv); -} - -static int scif_fdmmap(struct file *f, struct vm_area_struct *vma) -{ - struct scif_endpt *priv = f->private_data; - - return scif_mmap(vma, priv); -} - -static __poll_t scif_fdpoll(struct file *f, poll_table *wait) -{ - struct scif_endpt *priv = f->private_data; - - return __scif_pollfd(f, wait, priv); -} - -static int scif_fdflush(struct file *f, fl_owner_t id) -{ - struct scif_endpt *ep = f->private_data; - - spin_lock(&ep->lock); - /* - * The listening endpoint stashes the open file information before - * waiting for incoming connections. The release callback would never be - * called if the application closed the endpoint, while waiting for - * incoming connections from a separate thread since the file descriptor - * reference count is bumped up in the accept IOCTL. Call the flush - * routine if the id matches the endpoint open file information so that - * the listening endpoint can be woken up and the fd released. - */ - if (ep->files == id) - __scif_flush(ep); - spin_unlock(&ep->lock); - return 0; -} - -static __always_inline void scif_err_debug(int err, const char *str) -{ - /* - * ENOTCONN is a common uninteresting error which is - * flooding debug messages to the console unnecessarily. - */ - if (err < 0 && err != -ENOTCONN) - dev_dbg(scif_info.mdev.this_device, "%s err %d\n", str, err); -} - -static long scif_fdioctl(struct file *f, unsigned int cmd, unsigned long arg) -{ - struct scif_endpt *priv = f->private_data; - void __user *argp = (void __user *)arg; - int err = 0; - struct scifioctl_msg request; - bool non_block = false; - - non_block = !!(f->f_flags & O_NONBLOCK); - - switch (cmd) { - case SCIF_BIND: - { - int pn; - - if (copy_from_user(&pn, argp, sizeof(pn))) - return -EFAULT; - - pn = scif_bind(priv, pn); - if (pn < 0) - return pn; - - if (copy_to_user(argp, &pn, sizeof(pn))) - return -EFAULT; - - return 0; - } - case SCIF_LISTEN: - return scif_listen(priv, arg); - case SCIF_CONNECT: - { - struct scifioctl_connect req; - struct scif_endpt *ep = (struct scif_endpt *)priv; - - if (copy_from_user(&req, argp, sizeof(req))) - return -EFAULT; - - err = __scif_connect(priv, &req.peer, non_block); - if (err < 0) - return err; - - req.self.node = ep->port.node; - req.self.port = ep->port.port; - - if (copy_to_user(argp, &req, sizeof(req))) - return -EFAULT; - - return 0; - } - /* - * Accept is done in two halves. The request ioctl does the basic - * functionality of accepting the request and returning the information - * about it including the internal ID of the end point. The register - * is done with the internal ID on a new file descriptor opened by the - * requesting process. - */ - case SCIF_ACCEPTREQ: - { - struct scifioctl_accept request; - scif_epd_t *ep = (scif_epd_t *)&request.endpt; - - if (copy_from_user(&request, argp, sizeof(request))) - return -EFAULT; - - err = scif_accept(priv, &request.peer, ep, request.flags); - if (err < 0) - return err; - - if (copy_to_user(argp, &request, sizeof(request))) { - scif_close(*ep); - return -EFAULT; - } - /* - * Add to the list of user mode eps where the second half - * of the accept is not yet completed. - */ - mutex_lock(&scif_info.eplock); - list_add_tail(&((*ep)->miacceptlist), &scif_info.uaccept); - list_add_tail(&((*ep)->liacceptlist), &priv->li_accept); - (*ep)->listenep = priv; - priv->acceptcnt++; - mutex_unlock(&scif_info.eplock); - - return 0; - } - case SCIF_ACCEPTREG: - { - struct scif_endpt *priv = f->private_data; - struct scif_endpt *newep; - struct scif_endpt *lisep; - struct scif_endpt *fep = NULL; - struct scif_endpt *tmpep; - struct list_head *pos, *tmpq; - - /* Finally replace the pointer to the accepted endpoint */ - if (copy_from_user(&newep, argp, sizeof(void *))) - return -EFAULT; - - /* Remove form the user accept queue */ - mutex_lock(&scif_info.eplock); - list_for_each_safe(pos, tmpq, &scif_info.uaccept) { - tmpep = list_entry(pos, - struct scif_endpt, miacceptlist); - if (tmpep == newep) { - list_del(pos); - fep = tmpep; - break; - } - } - - if (!fep) { - mutex_unlock(&scif_info.eplock); - return -ENOENT; - } - - lisep = newep->listenep; - list_for_each_safe(pos, tmpq, &lisep->li_accept) { - tmpep = list_entry(pos, - struct scif_endpt, liacceptlist); - if (tmpep == newep) { - list_del(pos); - lisep->acceptcnt--; - break; - } - } - - mutex_unlock(&scif_info.eplock); - - /* Free the resources automatically created from the open. */ - scif_anon_inode_fput(priv); - scif_teardown_ep(priv); - scif_add_epd_to_zombie_list(priv, !SCIF_EPLOCK_HELD); - f->private_data = newep; - return 0; - } - case SCIF_SEND: - { - struct scif_endpt *priv = f->private_data; - - if (copy_from_user(&request, argp, - sizeof(struct scifioctl_msg))) { - err = -EFAULT; - goto send_err; - } - err = scif_user_send(priv, (void __user *)request.msg, - request.len, request.flags); - if (err < 0) - goto send_err; - if (copy_to_user(& - ((struct scifioctl_msg __user *)argp)->out_len, - &err, sizeof(err))) { - err = -EFAULT; - goto send_err; - } - err = 0; -send_err: - scif_err_debug(err, "scif_send"); - return err; - } - case SCIF_RECV: - { - struct scif_endpt *priv = f->private_data; - - if (copy_from_user(&request, argp, - sizeof(struct scifioctl_msg))) { - err = -EFAULT; - goto recv_err; - } - - err = scif_user_recv(priv, (void __user *)request.msg, - request.len, request.flags); - if (err < 0) - goto recv_err; - - if (copy_to_user(& - ((struct scifioctl_msg __user *)argp)->out_len, - &err, sizeof(err))) { - err = -EFAULT; - goto recv_err; - } - err = 0; -recv_err: - scif_err_debug(err, "scif_recv"); - return err; - } - case SCIF_GET_NODEIDS: - { - struct scifioctl_node_ids node_ids; - int entries; - u16 *nodes; - void __user *unodes, *uself; - u16 self; - - if (copy_from_user(&node_ids, argp, sizeof(node_ids))) { - err = -EFAULT; - goto getnodes_err2; - } - - entries = min_t(int, scif_info.maxid, node_ids.len); - nodes = kmalloc_array(entries, sizeof(u16), GFP_KERNEL); - if (entries && !nodes) { - err = -ENOMEM; - goto getnodes_err2; - } - node_ids.len = scif_get_node_ids(nodes, entries, &self); - - unodes = (void __user *)node_ids.nodes; - if (copy_to_user(unodes, nodes, sizeof(u16) * entries)) { - err = -EFAULT; - goto getnodes_err1; - } - - uself = (void __user *)node_ids.self; - if (copy_to_user(uself, &self, sizeof(u16))) { - err = -EFAULT; - goto getnodes_err1; - } - - if (copy_to_user(argp, &node_ids, sizeof(node_ids))) { - err = -EFAULT; - goto getnodes_err1; - } -getnodes_err1: - kfree(nodes); -getnodes_err2: - return err; - } - case SCIF_REG: - { - struct scif_endpt *priv = f->private_data; - struct scifioctl_reg reg; - off_t ret; - - if (copy_from_user(®, argp, sizeof(reg))) { - err = -EFAULT; - goto reg_err; - } - if (reg.flags & SCIF_MAP_KERNEL) { - err = -EINVAL; - goto reg_err; - } - ret = scif_register(priv, (void *)reg.addr, reg.len, - reg.offset, reg.prot, reg.flags); - if (ret < 0) { - err = (int)ret; - goto reg_err; - } - - if (copy_to_user(&((struct scifioctl_reg __user *)argp) - ->out_offset, &ret, sizeof(reg.out_offset))) { - err = -EFAULT; - goto reg_err; - } - err = 0; -reg_err: - scif_err_debug(err, "scif_register"); - return err; - } - case SCIF_UNREG: - { - struct scif_endpt *priv = f->private_data; - struct scifioctl_unreg unreg; - - if (copy_from_user(&unreg, argp, sizeof(unreg))) { - err = -EFAULT; - goto unreg_err; - } - err = scif_unregister(priv, unreg.offset, unreg.len); -unreg_err: - scif_err_debug(err, "scif_unregister"); - return err; - } - case SCIF_READFROM: - { - struct scif_endpt *priv = f->private_data; - struct scifioctl_copy copy; - - if (copy_from_user(©, argp, sizeof(copy))) { - err = -EFAULT; - goto readfrom_err; - } - err = scif_readfrom(priv, copy.loffset, copy.len, copy.roffset, - copy.flags); -readfrom_err: - scif_err_debug(err, "scif_readfrom"); - return err; - } - case SCIF_WRITETO: - { - struct scif_endpt *priv = f->private_data; - struct scifioctl_copy copy; - - if (copy_from_user(©, argp, sizeof(copy))) { - err = -EFAULT; - goto writeto_err; - } - err = scif_writeto(priv, copy.loffset, copy.len, copy.roffset, - copy.flags); -writeto_err: - scif_err_debug(err, "scif_writeto"); - return err; - } - case SCIF_VREADFROM: - { - struct scif_endpt *priv = f->private_data; - struct scifioctl_copy copy; - - if (copy_from_user(©, argp, sizeof(copy))) { - err = -EFAULT; - goto vreadfrom_err; - } - err = scif_vreadfrom(priv, (void __force *)copy.addr, copy.len, - copy.roffset, copy.flags); -vreadfrom_err: - scif_err_debug(err, "scif_vreadfrom"); - return err; - } - case SCIF_VWRITETO: - { - struct scif_endpt *priv = f->private_data; - struct scifioctl_copy copy; - - if (copy_from_user(©, argp, sizeof(copy))) { - err = -EFAULT; - goto vwriteto_err; - } - err = scif_vwriteto(priv, (void __force *)copy.addr, copy.len, - copy.roffset, copy.flags); -vwriteto_err: - scif_err_debug(err, "scif_vwriteto"); - return err; - } - case SCIF_FENCE_MARK: - { - struct scif_endpt *priv = f->private_data; - struct scifioctl_fence_mark mark; - int tmp_mark = 0; - - if (copy_from_user(&mark, argp, sizeof(mark))) { - err = -EFAULT; - goto fence_mark_err; - } - err = scif_fence_mark(priv, mark.flags, &tmp_mark); - if (err) - goto fence_mark_err; - if (copy_to_user((void __user *)mark.mark, &tmp_mark, - sizeof(tmp_mark))) { - err = -EFAULT; - goto fence_mark_err; - } -fence_mark_err: - scif_err_debug(err, "scif_fence_mark"); - return err; - } - case SCIF_FENCE_WAIT: - { - struct scif_endpt *priv = f->private_data; - - err = scif_fence_wait(priv, arg); - scif_err_debug(err, "scif_fence_wait"); - return err; - } - case SCIF_FENCE_SIGNAL: - { - struct scif_endpt *priv = f->private_data; - struct scifioctl_fence_signal signal; - - if (copy_from_user(&signal, argp, sizeof(signal))) { - err = -EFAULT; - goto fence_signal_err; - } - - err = scif_fence_signal(priv, signal.loff, signal.lval, - signal.roff, signal.rval, signal.flags); -fence_signal_err: - scif_err_debug(err, "scif_fence_signal"); - return err; - } - } - return -EINVAL; -} - -const struct file_operations scif_fops = { - .open = scif_fdopen, - .release = scif_fdclose, - .unlocked_ioctl = scif_fdioctl, - .mmap = scif_fdmmap, - .poll = scif_fdpoll, - .flush = scif_fdflush, - .owner = THIS_MODULE, -}; diff --git a/drivers/misc/mic/scif/scif_fence.c b/drivers/misc/mic/scif/scif_fence.c deleted file mode 100644 index 4fedf6183951..000000000000 --- a/drivers/misc/mic/scif/scif_fence.c +++ /dev/null @@ -1,783 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2015 Intel Corporation. - * - * Intel SCIF driver. - */ - -#include "scif_main.h" - -/** - * scif_recv_mark: Handle SCIF_MARK request - * @scifdev: SCIF device - * @msg: Interrupt message - * - * The peer has requested a mark. - */ -void scif_recv_mark(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_endpt *ep = (struct scif_endpt *)msg->payload[0]; - int mark = 0; - int err; - - err = _scif_fence_mark(ep, &mark); - if (err) - msg->uop = SCIF_MARK_NACK; - else - msg->uop = SCIF_MARK_ACK; - msg->payload[0] = ep->remote_ep; - msg->payload[2] = mark; - scif_nodeqp_send(ep->remote_dev, msg); -} - -/** - * scif_recv_mark_resp: Handle SCIF_MARK_(N)ACK messages. - * @scifdev: SCIF device - * @msg: Interrupt message - * - * The peer has responded to a SCIF_MARK message. - */ -void scif_recv_mark_resp(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_endpt *ep = (struct scif_endpt *)msg->payload[0]; - struct scif_fence_info *fence_req = - (struct scif_fence_info *)msg->payload[1]; - - mutex_lock(&ep->rma_info.rma_lock); - if (msg->uop == SCIF_MARK_ACK) { - fence_req->state = OP_COMPLETED; - fence_req->dma_mark = (int)msg->payload[2]; - } else { - fence_req->state = OP_FAILED; - } - mutex_unlock(&ep->rma_info.rma_lock); - complete(&fence_req->comp); -} - -/** - * scif_recv_wait: Handle SCIF_WAIT request - * @scifdev: SCIF device - * @msg: Interrupt message - * - * The peer has requested waiting on a fence. - */ -void scif_recv_wait(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_endpt *ep = (struct scif_endpt *)msg->payload[0]; - struct scif_remote_fence_info *fence; - - /* - * Allocate structure for remote fence information and - * send a NACK if the allocation failed. The peer will - * return ENOMEM upon receiving a NACK. - */ - fence = kmalloc(sizeof(*fence), GFP_KERNEL); - if (!fence) { - msg->payload[0] = ep->remote_ep; - msg->uop = SCIF_WAIT_NACK; - scif_nodeqp_send(ep->remote_dev, msg); - return; - } - - /* Prepare the fence request */ - memcpy(&fence->msg, msg, sizeof(struct scifmsg)); - INIT_LIST_HEAD(&fence->list); - - /* Insert to the global remote fence request list */ - mutex_lock(&scif_info.fencelock); - atomic_inc(&ep->rma_info.fence_refcount); - list_add_tail(&fence->list, &scif_info.fence); - mutex_unlock(&scif_info.fencelock); - - schedule_work(&scif_info.misc_work); -} - -/** - * scif_recv_wait_resp: Handle SCIF_WAIT_(N)ACK messages. - * @scifdev: SCIF device - * @msg: Interrupt message - * - * The peer has responded to a SCIF_WAIT message. - */ -void scif_recv_wait_resp(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_endpt *ep = (struct scif_endpt *)msg->payload[0]; - struct scif_fence_info *fence_req = - (struct scif_fence_info *)msg->payload[1]; - - mutex_lock(&ep->rma_info.rma_lock); - if (msg->uop == SCIF_WAIT_ACK) - fence_req->state = OP_COMPLETED; - else - fence_req->state = OP_FAILED; - mutex_unlock(&ep->rma_info.rma_lock); - complete(&fence_req->comp); -} - -/** - * scif_recv_sig_local: Handle SCIF_SIG_LOCAL request - * @scifdev: SCIF device - * @msg: Interrupt message - * - * The peer has requested a signal on a local offset. - */ -void scif_recv_sig_local(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_endpt *ep = (struct scif_endpt *)msg->payload[0]; - int err; - - err = scif_prog_signal(ep, msg->payload[1], msg->payload[2], - SCIF_WINDOW_SELF); - if (err) - msg->uop = SCIF_SIG_NACK; - else - msg->uop = SCIF_SIG_ACK; - msg->payload[0] = ep->remote_ep; - scif_nodeqp_send(ep->remote_dev, msg); -} - -/** - * scif_recv_sig_remote: Handle SCIF_SIGNAL_REMOTE request - * @scifdev: SCIF device - * @msg: Interrupt message - * - * The peer has requested a signal on a remote offset. - */ -void scif_recv_sig_remote(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_endpt *ep = (struct scif_endpt *)msg->payload[0]; - int err; - - err = scif_prog_signal(ep, msg->payload[1], msg->payload[2], - SCIF_WINDOW_PEER); - if (err) - msg->uop = SCIF_SIG_NACK; - else - msg->uop = SCIF_SIG_ACK; - msg->payload[0] = ep->remote_ep; - scif_nodeqp_send(ep->remote_dev, msg); -} - -/** - * scif_recv_sig_resp: Handle SCIF_SIG_(N)ACK messages. - * @scifdev: SCIF device - * @msg: Interrupt message - * - * The peer has responded to a signal request. - */ -void scif_recv_sig_resp(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_endpt *ep = (struct scif_endpt *)msg->payload[0]; - struct scif_fence_info *fence_req = - (struct scif_fence_info *)msg->payload[3]; - - mutex_lock(&ep->rma_info.rma_lock); - if (msg->uop == SCIF_SIG_ACK) - fence_req->state = OP_COMPLETED; - else - fence_req->state = OP_FAILED; - mutex_unlock(&ep->rma_info.rma_lock); - complete(&fence_req->comp); -} - -static inline void *scif_get_local_va(off_t off, struct scif_window *window) -{ - struct page **pages = window->pinned_pages->pages; - int page_nr = (off - window->offset) >> PAGE_SHIFT; - off_t page_off = off & ~PAGE_MASK; - - return page_address(pages[page_nr]) + page_off; -} - -static void scif_prog_signal_cb(void *arg) -{ - struct scif_cb_arg *cb_arg = arg; - - dma_pool_free(cb_arg->ep->remote_dev->signal_pool, cb_arg->status, - cb_arg->src_dma_addr); - kfree(cb_arg); -} - -static int _scif_prog_signal(scif_epd_t epd, dma_addr_t dst, u64 val) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - struct dma_chan *chan = ep->rma_info.dma_chan; - struct dma_device *ddev = chan->device; - bool x100 = !is_dma_copy_aligned(chan->device, 1, 1, 1); - struct dma_async_tx_descriptor *tx; - struct scif_status *status = NULL; - struct scif_cb_arg *cb_arg = NULL; - dma_addr_t src; - dma_cookie_t cookie; - int err; - - tx = ddev->device_prep_dma_memcpy(chan, 0, 0, 0, DMA_PREP_FENCE); - if (!tx) { - err = -ENOMEM; - dev_err(&ep->remote_dev->sdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - goto alloc_fail; - } - cookie = tx->tx_submit(tx); - if (dma_submit_error(cookie)) { - err = (int)cookie; - dev_err(&ep->remote_dev->sdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - goto alloc_fail; - } - dma_async_issue_pending(chan); - if (x100) { - /* - * For X100 use the status descriptor to write the value to - * the destination. - */ - tx = ddev->device_prep_dma_imm_data(chan, dst, val, 0); - } else { - status = dma_pool_alloc(ep->remote_dev->signal_pool, GFP_KERNEL, - &src); - if (!status) { - err = -ENOMEM; - dev_err(&ep->remote_dev->sdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - goto alloc_fail; - } - status->val = val; - status->src_dma_addr = src; - status->ep = ep; - src += offsetof(struct scif_status, val); - tx = ddev->device_prep_dma_memcpy(chan, dst, src, sizeof(val), - DMA_PREP_INTERRUPT); - } - if (!tx) { - err = -ENOMEM; - dev_err(&ep->remote_dev->sdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - goto dma_fail; - } - if (!x100) { - cb_arg = kmalloc(sizeof(*cb_arg), GFP_KERNEL); - if (!cb_arg) { - err = -ENOMEM; - goto dma_fail; - } - cb_arg->src_dma_addr = src; - cb_arg->status = status; - cb_arg->ep = ep; - tx->callback = scif_prog_signal_cb; - tx->callback_param = cb_arg; - } - cookie = tx->tx_submit(tx); - if (dma_submit_error(cookie)) { - err = -EIO; - dev_err(&ep->remote_dev->sdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - goto dma_fail; - } - dma_async_issue_pending(chan); - return 0; -dma_fail: - if (!x100) { - dma_pool_free(ep->remote_dev->signal_pool, status, - src - offsetof(struct scif_status, val)); - kfree(cb_arg); - } -alloc_fail: - return err; -} - -/** - * scif_prog_signal: - * @epd: Endpoint Descriptor - * @offset: registered address to write @val to - * @val: Value to be written at @offset - * @type: Type of the window. - * - * Arrange to write a value to the registered offset after ensuring that the - * offset provided is indeed valid. - */ -int scif_prog_signal(scif_epd_t epd, off_t offset, u64 val, - enum scif_window_type type) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - struct scif_window *window = NULL; - struct scif_rma_req req; - dma_addr_t dst_dma_addr; - int err; - - mutex_lock(&ep->rma_info.rma_lock); - req.out_window = &window; - req.offset = offset; - req.nr_bytes = sizeof(u64); - req.prot = SCIF_PROT_WRITE; - req.type = SCIF_WINDOW_SINGLE; - if (type == SCIF_WINDOW_SELF) - req.head = &ep->rma_info.reg_list; - else - req.head = &ep->rma_info.remote_reg_list; - /* Does a valid window exist? */ - err = scif_query_window(&req); - if (err) { - dev_err(scif_info.mdev.this_device, - "%s %d err %d\n", __func__, __LINE__, err); - goto unlock_ret; - } - - if (scif_is_mgmt_node() && scifdev_self(ep->remote_dev)) { - u64 *dst_virt; - - if (type == SCIF_WINDOW_SELF) - dst_virt = scif_get_local_va(offset, window); - else - dst_virt = - scif_get_local_va(offset, (struct scif_window *) - window->peer_window); - *dst_virt = val; - } else { - dst_dma_addr = __scif_off_to_dma_addr(window, offset); - err = _scif_prog_signal(epd, dst_dma_addr, val); - } -unlock_ret: - mutex_unlock(&ep->rma_info.rma_lock); - return err; -} - -static int _scif_fence_wait(scif_epd_t epd, int mark) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - dma_cookie_t cookie = mark & ~SCIF_REMOTE_FENCE; - int err; - - /* Wait for DMA callback in scif_fence_mark_cb(..) */ - err = wait_event_interruptible_timeout(ep->rma_info.markwq, - dma_async_is_tx_complete( - ep->rma_info.dma_chan, - cookie, NULL, NULL) == - DMA_COMPLETE, - SCIF_NODE_ALIVE_TIMEOUT); - if (!err) - err = -ETIMEDOUT; - else if (err > 0) - err = 0; - return err; -} - -/** - * scif_rma_handle_remote_fences: - * - * This routine services remote fence requests. - */ -void scif_rma_handle_remote_fences(void) -{ - struct list_head *item, *tmp; - struct scif_remote_fence_info *fence; - struct scif_endpt *ep; - int mark, err; - - might_sleep(); - mutex_lock(&scif_info.fencelock); - list_for_each_safe(item, tmp, &scif_info.fence) { - fence = list_entry(item, struct scif_remote_fence_info, - list); - /* Remove fence from global list */ - list_del(&fence->list); - - /* Initiate the fence operation */ - ep = (struct scif_endpt *)fence->msg.payload[0]; - mark = fence->msg.payload[2]; - err = _scif_fence_wait(ep, mark); - if (err) - fence->msg.uop = SCIF_WAIT_NACK; - else - fence->msg.uop = SCIF_WAIT_ACK; - fence->msg.payload[0] = ep->remote_ep; - scif_nodeqp_send(ep->remote_dev, &fence->msg); - kfree(fence); - if (!atomic_sub_return(1, &ep->rma_info.fence_refcount)) - schedule_work(&scif_info.misc_work); - } - mutex_unlock(&scif_info.fencelock); -} - -static int _scif_send_fence(scif_epd_t epd, int uop, int mark, int *out_mark) -{ - int err; - struct scifmsg msg; - struct scif_fence_info *fence_req; - struct scif_endpt *ep = (struct scif_endpt *)epd; - - fence_req = kmalloc(sizeof(*fence_req), GFP_KERNEL); - if (!fence_req) { - err = -ENOMEM; - goto error; - } - - fence_req->state = OP_IN_PROGRESS; - init_completion(&fence_req->comp); - - msg.src = ep->port; - msg.uop = uop; - msg.payload[0] = ep->remote_ep; - msg.payload[1] = (u64)fence_req; - if (uop == SCIF_WAIT) - msg.payload[2] = mark; - spin_lock(&ep->lock); - if (ep->state == SCIFEP_CONNECTED) - err = scif_nodeqp_send(ep->remote_dev, &msg); - else - err = -ENOTCONN; - spin_unlock(&ep->lock); - if (err) - goto error_free; -retry: - /* Wait for a SCIF_WAIT_(N)ACK message */ - err = wait_for_completion_timeout(&fence_req->comp, - SCIF_NODE_ALIVE_TIMEOUT); - if (!err && scifdev_alive(ep)) - goto retry; - if (!err) - err = -ENODEV; - if (err > 0) - err = 0; - mutex_lock(&ep->rma_info.rma_lock); - if (err < 0) { - if (fence_req->state == OP_IN_PROGRESS) - fence_req->state = OP_FAILED; - } - if (fence_req->state == OP_FAILED && !err) - err = -ENOMEM; - if (uop == SCIF_MARK && fence_req->state == OP_COMPLETED) - *out_mark = SCIF_REMOTE_FENCE | fence_req->dma_mark; - mutex_unlock(&ep->rma_info.rma_lock); -error_free: - kfree(fence_req); -error: - return err; -} - -/** - * scif_send_fence_mark: - * @epd: end point descriptor. - * @out_mark: Output DMA mark reported by peer. - * - * Send a remote fence mark request. - */ -static int scif_send_fence_mark(scif_epd_t epd, int *out_mark) -{ - return _scif_send_fence(epd, SCIF_MARK, 0, out_mark); -} - -/** - * scif_send_fence_wait: - * @epd: end point descriptor. - * @mark: DMA mark to wait for. - * - * Send a remote fence wait request. - */ -static int scif_send_fence_wait(scif_epd_t epd, int mark) -{ - return _scif_send_fence(epd, SCIF_WAIT, mark, NULL); -} - -static int _scif_send_fence_signal_wait(struct scif_endpt *ep, - struct scif_fence_info *fence_req) -{ - int err; - -retry: - /* Wait for a SCIF_SIG_(N)ACK message */ - err = wait_for_completion_timeout(&fence_req->comp, - SCIF_NODE_ALIVE_TIMEOUT); - if (!err && scifdev_alive(ep)) - goto retry; - if (!err) - err = -ENODEV; - if (err > 0) - err = 0; - if (err < 0) { - mutex_lock(&ep->rma_info.rma_lock); - if (fence_req->state == OP_IN_PROGRESS) - fence_req->state = OP_FAILED; - mutex_unlock(&ep->rma_info.rma_lock); - } - if (fence_req->state == OP_FAILED && !err) - err = -ENXIO; - return err; -} - -/** - * scif_send_fence_signal: - * @epd: endpoint descriptor - * @loff: local offset - * @lval: local value to write to loffset - * @roff: remote offset - * @rval: remote value to write to roffset - * @flags: flags - * - * Sends a remote fence signal request - */ -static int scif_send_fence_signal(scif_epd_t epd, off_t roff, u64 rval, - off_t loff, u64 lval, int flags) -{ - int err = 0; - struct scifmsg msg; - struct scif_fence_info *fence_req; - struct scif_endpt *ep = (struct scif_endpt *)epd; - - fence_req = kmalloc(sizeof(*fence_req), GFP_KERNEL); - if (!fence_req) { - err = -ENOMEM; - goto error; - } - - fence_req->state = OP_IN_PROGRESS; - init_completion(&fence_req->comp); - msg.src = ep->port; - if (flags & SCIF_SIGNAL_LOCAL) { - msg.uop = SCIF_SIG_LOCAL; - msg.payload[0] = ep->remote_ep; - msg.payload[1] = roff; - msg.payload[2] = rval; - msg.payload[3] = (u64)fence_req; - spin_lock(&ep->lock); - if (ep->state == SCIFEP_CONNECTED) - err = scif_nodeqp_send(ep->remote_dev, &msg); - else - err = -ENOTCONN; - spin_unlock(&ep->lock); - if (err) - goto error_free; - err = _scif_send_fence_signal_wait(ep, fence_req); - if (err) - goto error_free; - } - fence_req->state = OP_IN_PROGRESS; - - if (flags & SCIF_SIGNAL_REMOTE) { - msg.uop = SCIF_SIG_REMOTE; - msg.payload[0] = ep->remote_ep; - msg.payload[1] = loff; - msg.payload[2] = lval; - msg.payload[3] = (u64)fence_req; - spin_lock(&ep->lock); - if (ep->state == SCIFEP_CONNECTED) - err = scif_nodeqp_send(ep->remote_dev, &msg); - else - err = -ENOTCONN; - spin_unlock(&ep->lock); - if (err) - goto error_free; - err = _scif_send_fence_signal_wait(ep, fence_req); - } -error_free: - kfree(fence_req); -error: - return err; -} - -static void scif_fence_mark_cb(void *arg) -{ - struct scif_endpt *ep = (struct scif_endpt *)arg; - - wake_up_interruptible(&ep->rma_info.markwq); - atomic_dec(&ep->rma_info.fence_refcount); -} - -/** - * _scif_fence_mark: - * @epd: endpoint descriptor - * @mark: DMA mark to set-up - * - * Set up a mark for this endpoint and return the value of the mark. - */ -int _scif_fence_mark(scif_epd_t epd, int *mark) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - struct dma_chan *chan = ep->rma_info.dma_chan; - struct dma_device *ddev = chan->device; - struct dma_async_tx_descriptor *tx; - dma_cookie_t cookie; - int err; - - tx = ddev->device_prep_dma_memcpy(chan, 0, 0, 0, DMA_PREP_FENCE); - if (!tx) { - err = -ENOMEM; - dev_err(&ep->remote_dev->sdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - return err; - } - cookie = tx->tx_submit(tx); - if (dma_submit_error(cookie)) { - err = (int)cookie; - dev_err(&ep->remote_dev->sdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - return err; - } - dma_async_issue_pending(chan); - tx = ddev->device_prep_dma_interrupt(chan, DMA_PREP_INTERRUPT); - if (!tx) { - err = -ENOMEM; - dev_err(&ep->remote_dev->sdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - return err; - } - tx->callback = scif_fence_mark_cb; - tx->callback_param = ep; - *mark = cookie = tx->tx_submit(tx); - if (dma_submit_error(cookie)) { - err = (int)cookie; - dev_err(&ep->remote_dev->sdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - return err; - } - atomic_inc(&ep->rma_info.fence_refcount); - dma_async_issue_pending(chan); - return 0; -} - -#define SCIF_LOOPB_MAGIC_MARK 0xdead - -int scif_fence_mark(scif_epd_t epd, int flags, int *mark) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - int err = 0; - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI fence_mark: ep %p flags 0x%x mark 0x%x\n", - ep, flags, *mark); - err = scif_verify_epd(ep); - if (err) - return err; - - /* Invalid flags? */ - if (flags & ~(SCIF_FENCE_INIT_SELF | SCIF_FENCE_INIT_PEER)) - return -EINVAL; - - /* At least one of init self or peer RMA should be set */ - if (!(flags & (SCIF_FENCE_INIT_SELF | SCIF_FENCE_INIT_PEER))) - return -EINVAL; - - /* Exactly one of init self or peer RMA should be set but not both */ - if ((flags & SCIF_FENCE_INIT_SELF) && (flags & SCIF_FENCE_INIT_PEER)) - return -EINVAL; - - /* - * Management node loopback does not need to use DMA. - * Return a valid mark to be symmetric. - */ - if (scifdev_self(ep->remote_dev) && scif_is_mgmt_node()) { - *mark = SCIF_LOOPB_MAGIC_MARK; - return 0; - } - - if (flags & SCIF_FENCE_INIT_SELF) - err = _scif_fence_mark(epd, mark); - else - err = scif_send_fence_mark(ep, mark); - - if (err) - dev_err(scif_info.mdev.this_device, - "%s %d err %d\n", __func__, __LINE__, err); - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI fence_mark: ep %p flags 0x%x mark 0x%x err %d\n", - ep, flags, *mark, err); - return err; -} -EXPORT_SYMBOL_GPL(scif_fence_mark); - -int scif_fence_wait(scif_epd_t epd, int mark) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - int err = 0; - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI fence_wait: ep %p mark 0x%x\n", - ep, mark); - err = scif_verify_epd(ep); - if (err) - return err; - /* - * Management node loopback does not need to use DMA. - * The only valid mark provided is 0 so simply - * return success if the mark is valid. - */ - if (scifdev_self(ep->remote_dev) && scif_is_mgmt_node()) { - if (mark == SCIF_LOOPB_MAGIC_MARK) - return 0; - else - return -EINVAL; - } - if (mark & SCIF_REMOTE_FENCE) - err = scif_send_fence_wait(epd, mark); - else - err = _scif_fence_wait(epd, mark); - if (err < 0) - dev_err(scif_info.mdev.this_device, - "%s %d err %d\n", __func__, __LINE__, err); - return err; -} -EXPORT_SYMBOL_GPL(scif_fence_wait); - -int scif_fence_signal(scif_epd_t epd, off_t loff, u64 lval, - off_t roff, u64 rval, int flags) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - int err = 0; - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI fence_signal: ep %p loff 0x%lx lval 0x%llx roff 0x%lx rval 0x%llx flags 0x%x\n", - ep, loff, lval, roff, rval, flags); - err = scif_verify_epd(ep); - if (err) - return err; - - /* Invalid flags? */ - if (flags & ~(SCIF_FENCE_INIT_SELF | SCIF_FENCE_INIT_PEER | - SCIF_SIGNAL_LOCAL | SCIF_SIGNAL_REMOTE)) - return -EINVAL; - - /* At least one of init self or peer RMA should be set */ - if (!(flags & (SCIF_FENCE_INIT_SELF | SCIF_FENCE_INIT_PEER))) - return -EINVAL; - - /* Exactly one of init self or peer RMA should be set but not both */ - if ((flags & SCIF_FENCE_INIT_SELF) && (flags & SCIF_FENCE_INIT_PEER)) - return -EINVAL; - - /* At least one of SCIF_SIGNAL_LOCAL or SCIF_SIGNAL_REMOTE required */ - if (!(flags & (SCIF_SIGNAL_LOCAL | SCIF_SIGNAL_REMOTE))) - return -EINVAL; - - /* Only Dword offsets allowed */ - if ((flags & SCIF_SIGNAL_LOCAL) && (loff & (sizeof(u32) - 1))) - return -EINVAL; - - /* Only Dword aligned offsets allowed */ - if ((flags & SCIF_SIGNAL_REMOTE) && (roff & (sizeof(u32) - 1))) - return -EINVAL; - - if (flags & SCIF_FENCE_INIT_PEER) { - err = scif_send_fence_signal(epd, roff, rval, loff, - lval, flags); - } else { - /* Local Signal in Local RAS */ - if (flags & SCIF_SIGNAL_LOCAL) { - err = scif_prog_signal(epd, loff, lval, - SCIF_WINDOW_SELF); - if (err) - goto error_ret; - } - - /* Signal in Remote RAS */ - if (flags & SCIF_SIGNAL_REMOTE) - err = scif_prog_signal(epd, roff, - rval, SCIF_WINDOW_PEER); - } -error_ret: - if (err) - dev_err(scif_info.mdev.this_device, - "%s %d err %d\n", __func__, __LINE__, err); - return err; -} -EXPORT_SYMBOL_GPL(scif_fence_signal); diff --git a/drivers/misc/mic/scif/scif_main.c b/drivers/misc/mic/scif/scif_main.c deleted file mode 100644 index e2278bf9f11d..000000000000 --- a/drivers/misc/mic/scif/scif_main.c +++ /dev/null @@ -1,351 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel SCIF driver. - */ -#include <linux/module.h> -#include <linux/idr.h> - -#include <linux/mic_common.h> -#include "../common/mic_dev.h" -#include "../bus/scif_bus.h" -#include "scif_peer_bus.h" -#include "scif_main.h" -#include "scif_map.h" - -struct scif_info scif_info = { - .mdev = { - .minor = MISC_DYNAMIC_MINOR, - .name = "scif", - .fops = &scif_fops, - } -}; - -struct scif_dev *scif_dev; -struct kmem_cache *unaligned_cache; -static atomic_t g_loopb_cnt; - -/* Runs in the context of intr_wq */ -static void scif_intr_bh_handler(struct work_struct *work) -{ - struct scif_dev *scifdev = - container_of(work, struct scif_dev, intr_bh); - - if (scifdev_self(scifdev)) - scif_loopb_msg_handler(scifdev, scifdev->qpairs); - else - scif_nodeqp_intrhandler(scifdev, scifdev->qpairs); -} - -int scif_setup_intr_wq(struct scif_dev *scifdev) -{ - if (!scifdev->intr_wq) { - snprintf(scifdev->intr_wqname, sizeof(scifdev->intr_wqname), - "SCIF INTR %d", scifdev->node); - scifdev->intr_wq = - alloc_ordered_workqueue(scifdev->intr_wqname, 0); - if (!scifdev->intr_wq) - return -ENOMEM; - INIT_WORK(&scifdev->intr_bh, scif_intr_bh_handler); - } - return 0; -} - -void scif_destroy_intr_wq(struct scif_dev *scifdev) -{ - if (scifdev->intr_wq) { - destroy_workqueue(scifdev->intr_wq); - scifdev->intr_wq = NULL; - } -} - -irqreturn_t scif_intr_handler(int irq, void *data) -{ - struct scif_dev *scifdev = data; - struct scif_hw_dev *sdev = scifdev->sdev; - - sdev->hw_ops->ack_interrupt(sdev, scifdev->db); - queue_work(scifdev->intr_wq, &scifdev->intr_bh); - return IRQ_HANDLED; -} - -static void scif_qp_setup_handler(struct work_struct *work) -{ - struct scif_dev *scifdev = container_of(work, struct scif_dev, - qp_dwork.work); - struct scif_hw_dev *sdev = scifdev->sdev; - dma_addr_t da = 0; - int err; - - if (scif_is_mgmt_node()) { - struct mic_bootparam *bp = sdev->dp; - - da = bp->scif_card_dma_addr; - scifdev->rdb = bp->h2c_scif_db; - } else { - struct mic_bootparam __iomem *bp = sdev->rdp; - - da = readq(&bp->scif_host_dma_addr); - scifdev->rdb = ioread8(&bp->c2h_scif_db); - } - if (da) { - err = scif_qp_response(da, scifdev); - if (err) - dev_err(&scifdev->sdev->dev, - "scif_qp_response err %d\n", err); - } else { - schedule_delayed_work(&scifdev->qp_dwork, - msecs_to_jiffies(1000)); - } -} - -static int scif_setup_scifdev(void) -{ - /* We support a maximum of 129 SCIF nodes including the mgmt node */ -#define MAX_SCIF_NODES 129 - int i; - u8 num_nodes = MAX_SCIF_NODES; - - scif_dev = kcalloc(num_nodes, sizeof(*scif_dev), GFP_KERNEL); - if (!scif_dev) - return -ENOMEM; - for (i = 0; i < num_nodes; i++) { - struct scif_dev *scifdev = &scif_dev[i]; - - scifdev->node = i; - scifdev->exit = OP_IDLE; - init_waitqueue_head(&scifdev->disconn_wq); - mutex_init(&scifdev->lock); - INIT_WORK(&scifdev->peer_add_work, scif_add_peer_device); - INIT_DELAYED_WORK(&scifdev->p2p_dwork, - scif_poll_qp_state); - INIT_DELAYED_WORK(&scifdev->qp_dwork, - scif_qp_setup_handler); - INIT_LIST_HEAD(&scifdev->p2p); - RCU_INIT_POINTER(scifdev->spdev, NULL); - } - return 0; -} - -static void scif_destroy_scifdev(void) -{ - kfree(scif_dev); - scif_dev = NULL; -} - -static int scif_probe(struct scif_hw_dev *sdev) -{ - struct scif_dev *scifdev = &scif_dev[sdev->dnode]; - int rc; - - dev_set_drvdata(&sdev->dev, sdev); - scifdev->sdev = sdev; - - if (1 == atomic_add_return(1, &g_loopb_cnt)) { - struct scif_dev *loopb_dev = &scif_dev[sdev->snode]; - - loopb_dev->sdev = sdev; - rc = scif_setup_loopback_qp(loopb_dev); - if (rc) - goto exit; - } - - rc = scif_setup_intr_wq(scifdev); - if (rc) - goto destroy_loopb; - rc = scif_setup_qp(scifdev); - if (rc) - goto destroy_intr; - scifdev->db = sdev->hw_ops->next_db(sdev); - scifdev->cookie = sdev->hw_ops->request_irq(sdev, scif_intr_handler, - "SCIF_INTR", scifdev, - scifdev->db); - if (IS_ERR(scifdev->cookie)) { - rc = PTR_ERR(scifdev->cookie); - goto free_qp; - } - if (scif_is_mgmt_node()) { - struct mic_bootparam *bp = sdev->dp; - - bp->c2h_scif_db = scifdev->db; - bp->scif_host_dma_addr = scifdev->qp_dma_addr; - } else { - struct mic_bootparam __iomem *bp = sdev->rdp; - - iowrite8(scifdev->db, &bp->h2c_scif_db); - writeq(scifdev->qp_dma_addr, &bp->scif_card_dma_addr); - } - schedule_delayed_work(&scifdev->qp_dwork, - msecs_to_jiffies(1000)); - return rc; -free_qp: - scif_free_qp(scifdev); -destroy_intr: - scif_destroy_intr_wq(scifdev); -destroy_loopb: - if (atomic_dec_and_test(&g_loopb_cnt)) - scif_destroy_loopback_qp(&scif_dev[sdev->snode]); -exit: - return rc; -} - -void scif_stop(struct scif_dev *scifdev) -{ - struct scif_dev *dev; - int i; - - for (i = scif_info.maxid; i >= 0; i--) { - dev = &scif_dev[i]; - if (scifdev_self(dev)) - continue; - scif_handle_remove_node(i); - } -} - -static void scif_remove(struct scif_hw_dev *sdev) -{ - struct scif_dev *scifdev = &scif_dev[sdev->dnode]; - - if (scif_is_mgmt_node()) { - struct mic_bootparam *bp = sdev->dp; - - bp->c2h_scif_db = -1; - bp->scif_host_dma_addr = 0x0; - } else { - struct mic_bootparam __iomem *bp = sdev->rdp; - - iowrite8(-1, &bp->h2c_scif_db); - writeq(0x0, &bp->scif_card_dma_addr); - } - if (scif_is_mgmt_node()) { - scif_disconnect_node(scifdev->node, true); - } else { - scif_info.card_initiated_exit = true; - scif_stop(scifdev); - } - if (atomic_dec_and_test(&g_loopb_cnt)) - scif_destroy_loopback_qp(&scif_dev[sdev->snode]); - if (scifdev->cookie) { - sdev->hw_ops->free_irq(sdev, scifdev->cookie, scifdev); - scifdev->cookie = NULL; - } - scif_destroy_intr_wq(scifdev); - cancel_delayed_work(&scifdev->qp_dwork); - scif_free_qp(scifdev); - scifdev->rdb = -1; - scifdev->sdev = NULL; -} - -static struct scif_hw_dev_id id_table[] = { - { MIC_SCIF_DEV, SCIF_DEV_ANY_ID }, - { 0 }, -}; - -static struct scif_driver scif_driver = { - .driver.name = KBUILD_MODNAME, - .driver.owner = THIS_MODULE, - .id_table = id_table, - .probe = scif_probe, - .remove = scif_remove, -}; - -static int _scif_init(void) -{ - int rc; - - mutex_init(&scif_info.eplock); - spin_lock_init(&scif_info.rmalock); - spin_lock_init(&scif_info.nb_connect_lock); - spin_lock_init(&scif_info.port_lock); - mutex_init(&scif_info.conflock); - mutex_init(&scif_info.connlock); - mutex_init(&scif_info.fencelock); - INIT_LIST_HEAD(&scif_info.uaccept); - INIT_LIST_HEAD(&scif_info.listen); - INIT_LIST_HEAD(&scif_info.zombie); - INIT_LIST_HEAD(&scif_info.connected); - INIT_LIST_HEAD(&scif_info.disconnected); - INIT_LIST_HEAD(&scif_info.rma); - INIT_LIST_HEAD(&scif_info.rma_tc); - INIT_LIST_HEAD(&scif_info.mmu_notif_cleanup); - INIT_LIST_HEAD(&scif_info.fence); - INIT_LIST_HEAD(&scif_info.nb_connect_list); - init_waitqueue_head(&scif_info.exitwq); - scif_info.rma_tc_limit = SCIF_RMA_TEMP_CACHE_LIMIT; - scif_info.en_msg_log = 0; - scif_info.p2p_enable = 1; - rc = scif_setup_scifdev(); - if (rc) - goto error; - unaligned_cache = kmem_cache_create("Unaligned_DMA", - SCIF_KMEM_UNALIGNED_BUF_SIZE, - 0, SLAB_HWCACHE_ALIGN, NULL); - if (!unaligned_cache) { - rc = -ENOMEM; - goto free_sdev; - } - INIT_WORK(&scif_info.misc_work, scif_misc_handler); - INIT_WORK(&scif_info.mmu_notif_work, scif_mmu_notif_handler); - INIT_WORK(&scif_info.conn_work, scif_conn_handler); - idr_init(&scif_ports); - return 0; -free_sdev: - scif_destroy_scifdev(); -error: - return rc; -} - -static void _scif_exit(void) -{ - idr_destroy(&scif_ports); - kmem_cache_destroy(unaligned_cache); - scif_destroy_scifdev(); -} - -static int __init scif_init(void) -{ - struct miscdevice *mdev = &scif_info.mdev; - int rc; - - _scif_init(); - iova_cache_get(); - rc = scif_peer_bus_init(); - if (rc) - goto exit; - rc = scif_register_driver(&scif_driver); - if (rc) - goto peer_bus_exit; - rc = misc_register(mdev); - if (rc) - goto unreg_scif; - scif_init_debugfs(); - return 0; -unreg_scif: - scif_unregister_driver(&scif_driver); -peer_bus_exit: - scif_peer_bus_exit(); -exit: - _scif_exit(); - return rc; -} - -static void __exit scif_exit(void) -{ - scif_exit_debugfs(); - misc_deregister(&scif_info.mdev); - scif_unregister_driver(&scif_driver); - scif_peer_bus_exit(); - iova_cache_put(); - _scif_exit(); -} - -module_init(scif_init); -module_exit(scif_exit); - -MODULE_DEVICE_TABLE(scif, id_table); -MODULE_AUTHOR("Intel Corporation"); -MODULE_DESCRIPTION("Intel(R) SCIF driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/mic/scif/scif_main.h b/drivers/misc/mic/scif/scif_main.h deleted file mode 100644 index bb3ab97d5b35..000000000000 --- a/drivers/misc/mic/scif/scif_main.h +++ /dev/null @@ -1,274 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel SCIF driver. - */ -#ifndef SCIF_MAIN_H -#define SCIF_MAIN_H - -#include <linux/sched/signal.h> -#include <linux/pci.h> -#include <linux/miscdevice.h> -#include <linux/dmaengine.h> -#include <linux/iova.h> -#include <linux/anon_inodes.h> -#include <linux/file.h> -#include <linux/vmalloc.h> -#include <linux/scif.h> -#include "../common/mic_dev.h" - -#define SCIF_MGMT_NODE 0 -#define SCIF_DEFAULT_WATCHDOG_TO 30 -#define SCIF_NODE_ACCEPT_TIMEOUT (3 * HZ) -#define SCIF_NODE_ALIVE_TIMEOUT (SCIF_DEFAULT_WATCHDOG_TO * HZ) -#define SCIF_RMA_TEMP_CACHE_LIMIT 0x20000 - -/* - * Generic state used for certain node QP message exchanges - * like Unregister, Alloc etc. - */ -enum scif_msg_state { - OP_IDLE = 1, - OP_IN_PROGRESS, - OP_COMPLETED, - OP_FAILED -}; - -/* - * struct scif_info - Global SCIF information - * - * @nodeid: Node ID this node is to others - * @maxid: Max known node ID - * @total: Total number of SCIF nodes - * @nr_zombies: number of zombie endpoints - * @eplock: Lock to synchronize listening, zombie endpoint lists - * @connlock: Lock to synchronize connected and disconnected lists - * @nb_connect_lock: Synchronize non blocking connect operations - * @port_lock: Synchronize access to SCIF ports - * @uaccept: List of user acceptreq waiting for acceptreg - * @listen: List of listening end points - * @zombie: List of zombie end points with pending RMA's - * @connected: List of end points in connected state - * @disconnected: List of end points in disconnected state - * @nb_connect_list: List for non blocking connections - * @misc_work: miscellaneous SCIF tasks - * @conflock: Lock to synchronize SCIF node configuration changes - * @en_msg_log: Enable debug message logging - * @p2p_enable: Enable P2P SCIF network - * @mdev: The MISC device - * @conn_work: Work for workqueue handling all connections - * @exitwq: Wait queue for waiting for an EXIT node QP message response - * @loopb_dev: Dummy SCIF device used for loopback - * @loopb_wq: Workqueue used for handling loopback messages - * @loopb_wqname[16]: Name of loopback workqueue - * @loopb_work: Used for submitting work to loopb_wq - * @loopb_recv_q: List of messages received on the loopb_wq - * @card_initiated_exit: set when the card has initiated the exit - * @rmalock: Synchronize access to RMA operations - * @fencelock: Synchronize access to list of remote fences requested. - * @rma: List of temporary registered windows to be destroyed. - * @rma_tc: List of temporary registered & cached Windows to be destroyed - * @fence: List of remote fence requests - * @mmu_notif_work: Work for registration caching MMU notifier workqueue - * @mmu_notif_cleanup: List of temporary cached windows for reg cache - * @rma_tc_limit: RMA temporary cache limit - */ -struct scif_info { - u8 nodeid; - u8 maxid; - u8 total; - u32 nr_zombies; - struct mutex eplock; - struct mutex connlock; - spinlock_t nb_connect_lock; - spinlock_t port_lock; - struct list_head uaccept; - struct list_head listen; - struct list_head zombie; - struct list_head connected; - struct list_head disconnected; - struct list_head nb_connect_list; - struct work_struct misc_work; - struct mutex conflock; - u8 en_msg_log; - u8 p2p_enable; - struct miscdevice mdev; - struct work_struct conn_work; - wait_queue_head_t exitwq; - struct scif_dev *loopb_dev; - struct workqueue_struct *loopb_wq; - char loopb_wqname[16]; - struct work_struct loopb_work; - struct list_head loopb_recv_q; - bool card_initiated_exit; - spinlock_t rmalock; - struct mutex fencelock; - struct list_head rma; - struct list_head rma_tc; - struct list_head fence; - struct work_struct mmu_notif_work; - struct list_head mmu_notif_cleanup; - unsigned long rma_tc_limit; -}; - -/* - * struct scif_p2p_info - SCIF mapping information used for P2P - * - * @ppi_peer_id - SCIF peer node id - * @ppi_sg - Scatter list for bar information (One for mmio and one for aper) - * @sg_nentries - Number of entries in the scatterlist - * @ppi_da: DMA address for MMIO and APER bars - * @ppi_len: Length of MMIO and APER bars - * @ppi_list: Link in list of mapping information - */ -struct scif_p2p_info { - u8 ppi_peer_id; - struct scatterlist *ppi_sg[2]; - u64 sg_nentries[2]; - dma_addr_t ppi_da[2]; - u64 ppi_len[2]; -#define SCIF_PPI_MMIO 0 -#define SCIF_PPI_APER 1 - struct list_head ppi_list; -}; - -/* - * struct scif_dev - SCIF remote device specific fields - * - * @node: Node id - * @p2p: List of P2P mapping information - * @qpairs: The node queue pair for exchanging control messages - * @intr_wq: Workqueue for handling Node QP messages - * @intr_wqname: Name of node QP workqueue for handling interrupts - * @intr_bh: Used for submitting work to intr_wq - * @lock: Lock used for synchronizing access to the scif device - * @sdev: SCIF hardware device on the SCIF hardware bus - * @db: doorbell the peer will trigger to generate an interrupt on self - * @rdb: Doorbell to trigger on the peer to generate an interrupt on the peer - * @cookie: Cookie received while registering the interrupt handler - * @peer_add_work: Work for handling device_add for peer devices - * @p2p_dwork: Delayed work to enable polling for P2P state - * @qp_dwork: Delayed work for enabling polling for remote QP information - * @p2p_retry: Number of times to retry polling of P2P state - * @base_addr: P2P aperture bar base address - * @mic_mw mmio: The peer MMIO information used for P2P - * @spdev: SCIF peer device on the SCIF peer bus - * @node_remove_ack_pending: True if a node_remove_ack is pending - * @exit_ack_pending: true if an exit_ack is pending - * @disconn_wq: Used while waiting for a node remove response - * @disconn_rescnt: Keeps track of number of node remove requests sent - * @exit: Status of exit message - * @qp_dma_addr: Queue pair DMA address passed to the peer - * @dma_ch_idx: Round robin index for DMA channels - * @signal_pool: DMA pool used for scheduling scif_fence_signal DMA's -*/ -struct scif_dev { - u8 node; - struct list_head p2p; - struct scif_qp *qpairs; - struct workqueue_struct *intr_wq; - char intr_wqname[16]; - struct work_struct intr_bh; - struct mutex lock; - struct scif_hw_dev *sdev; - int db; - int rdb; - struct mic_irq *cookie; - struct work_struct peer_add_work; - struct delayed_work p2p_dwork; - struct delayed_work qp_dwork; - int p2p_retry; - dma_addr_t base_addr; - struct mic_mw mmio; - struct scif_peer_dev __rcu *spdev; - bool node_remove_ack_pending; - bool exit_ack_pending; - wait_queue_head_t disconn_wq; - atomic_t disconn_rescnt; - enum scif_msg_state exit; - dma_addr_t qp_dma_addr; - int dma_ch_idx; - struct dma_pool *signal_pool; -}; - -extern bool scif_reg_cache_enable; -extern bool scif_ulimit_check; -extern struct scif_info scif_info; -extern struct idr scif_ports; -extern struct bus_type scif_peer_bus; -extern struct scif_dev *scif_dev; -extern const struct file_operations scif_fops; -extern const struct file_operations scif_anon_fops; - -/* Size of the RB for the Node QP */ -#define SCIF_NODE_QP_SIZE 0x10000 - -#include "scif_nodeqp.h" -#include "scif_rma.h" -#include "scif_rma_list.h" - -/* - * scifdev_self: - * @dev: The remote SCIF Device - * - * Returns true if the SCIF Device passed is the self aka Loopback SCIF device. - */ -static inline int scifdev_self(struct scif_dev *dev) -{ - return dev->node == scif_info.nodeid; -} - -static inline bool scif_is_mgmt_node(void) -{ - return !scif_info.nodeid; -} - -/* - * scifdev_is_p2p: - * @dev: The remote SCIF Device - * - * Returns true if the SCIF Device is a MIC Peer to Peer SCIF device. - */ -static inline bool scifdev_is_p2p(struct scif_dev *dev) -{ - if (scif_is_mgmt_node()) - return false; - else - return dev != &scif_dev[SCIF_MGMT_NODE] && - !scifdev_self(dev); -} - -/* - * scifdev_alive: - * @scifdev: The remote SCIF Device - * - * Returns true if the remote SCIF Device is running or sleeping for - * this endpoint. - */ -static inline int _scifdev_alive(struct scif_dev *scifdev) -{ - struct scif_peer_dev *spdev; - - rcu_read_lock(); - spdev = rcu_dereference(scifdev->spdev); - rcu_read_unlock(); - return !!spdev; -} - -#include "scif_epd.h" - -void __init scif_init_debugfs(void); -void scif_exit_debugfs(void); -int scif_setup_intr_wq(struct scif_dev *scifdev); -void scif_destroy_intr_wq(struct scif_dev *scifdev); -void scif_cleanup_scifdev(struct scif_dev *dev); -void scif_handle_remove_node(int node); -void scif_disconnect_node(u32 node_id, bool mgmt_initiated); -void scif_free_qp(struct scif_dev *dev); -void scif_misc_handler(struct work_struct *work); -void scif_stop(struct scif_dev *scifdev); -irqreturn_t scif_intr_handler(int irq, void *data); -#endif /* SCIF_MAIN_H */ diff --git a/drivers/misc/mic/scif/scif_map.h b/drivers/misc/mic/scif/scif_map.h deleted file mode 100644 index 96b760819bfc..000000000000 --- a/drivers/misc/mic/scif/scif_map.h +++ /dev/null @@ -1,127 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel SCIF driver. - */ -#ifndef SCIF_MAP_H -#define SCIF_MAP_H - -#include "../bus/scif_bus.h" - -static __always_inline void * -scif_alloc_coherent(dma_addr_t *dma_handle, - struct scif_dev *scifdev, size_t size, - gfp_t gfp) -{ - void *va; - - if (scifdev_self(scifdev)) { - va = kmalloc(size, gfp); - if (va) - *dma_handle = virt_to_phys(va); - } else { - va = dma_alloc_coherent(&scifdev->sdev->dev, - size, dma_handle, gfp); - if (va && scifdev_is_p2p(scifdev)) - *dma_handle = *dma_handle + scifdev->base_addr; - } - return va; -} - -static __always_inline void -scif_free_coherent(void *va, dma_addr_t local, - struct scif_dev *scifdev, size_t size) -{ - if (scifdev_self(scifdev)) { - kfree(va); - } else { - if (scifdev_is_p2p(scifdev) && local > scifdev->base_addr) - local = local - scifdev->base_addr; - dma_free_coherent(&scifdev->sdev->dev, - size, va, local); - } -} - -static __always_inline int -scif_map_single(dma_addr_t *dma_handle, - void *local, struct scif_dev *scifdev, size_t size) -{ - int err = 0; - - if (scifdev_self(scifdev)) { - *dma_handle = virt_to_phys((local)); - } else { - *dma_handle = dma_map_single(&scifdev->sdev->dev, - local, size, DMA_BIDIRECTIONAL); - if (dma_mapping_error(&scifdev->sdev->dev, *dma_handle)) - err = -ENOMEM; - else if (scifdev_is_p2p(scifdev)) - *dma_handle = *dma_handle + scifdev->base_addr; - } - if (err) - *dma_handle = 0; - return err; -} - -static __always_inline void -scif_unmap_single(dma_addr_t local, struct scif_dev *scifdev, - size_t size) -{ - if (!scifdev_self(scifdev)) { - if (scifdev_is_p2p(scifdev)) - local = local - scifdev->base_addr; - dma_unmap_single(&scifdev->sdev->dev, local, - size, DMA_BIDIRECTIONAL); - } -} - -static __always_inline void * -scif_ioremap(dma_addr_t phys, size_t size, struct scif_dev *scifdev) -{ - void *out_virt; - struct scif_hw_dev *sdev = scifdev->sdev; - - if (scifdev_self(scifdev)) - out_virt = phys_to_virt(phys); - else - out_virt = (void __force *) - sdev->hw_ops->remap(sdev, phys, size); - return out_virt; -} - -static __always_inline void -scif_iounmap(void *virt, size_t len, struct scif_dev *scifdev) -{ - if (!scifdev_self(scifdev)) { - struct scif_hw_dev *sdev = scifdev->sdev; - - sdev->hw_ops->unmap(sdev, (void __force __iomem *)virt); - } -} - -static __always_inline int -scif_map_page(dma_addr_t *dma_handle, struct page *page, - struct scif_dev *scifdev) -{ - int err = 0; - - if (scifdev_self(scifdev)) { - *dma_handle = page_to_phys(page); - } else { - struct scif_hw_dev *sdev = scifdev->sdev; - *dma_handle = dma_map_page(&sdev->dev, - page, 0x0, PAGE_SIZE, - DMA_BIDIRECTIONAL); - if (dma_mapping_error(&sdev->dev, *dma_handle)) - err = -ENOMEM; - else if (scifdev_is_p2p(scifdev)) - *dma_handle = *dma_handle + scifdev->base_addr; - } - if (err) - *dma_handle = 0; - return err; -} -#endif /* SCIF_MAP_H */ diff --git a/drivers/misc/mic/scif/scif_mmap.c b/drivers/misc/mic/scif/scif_mmap.c deleted file mode 100644 index a151d416f39c..000000000000 --- a/drivers/misc/mic/scif/scif_mmap.c +++ /dev/null @@ -1,690 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2015 Intel Corporation. - * - * Intel SCIF driver. - */ -#include "scif_main.h" - -/* - * struct scif_vma_info - Information about a remote memory mapping - * created via scif_mmap(..) - * @vma: VM area struct - * @list: link to list of active vmas - */ -struct scif_vma_info { - struct vm_area_struct *vma; - struct list_head list; -}; - -void scif_recv_munmap(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_rma_req req; - struct scif_window *window = NULL; - struct scif_window *recv_window = - (struct scif_window *)msg->payload[0]; - struct scif_endpt *ep; - - ep = (struct scif_endpt *)recv_window->ep; - req.out_window = &window; - req.offset = recv_window->offset; - req.prot = recv_window->prot; - req.nr_bytes = recv_window->nr_pages << PAGE_SHIFT; - req.type = SCIF_WINDOW_FULL; - req.head = &ep->rma_info.reg_list; - msg->payload[0] = ep->remote_ep; - - mutex_lock(&ep->rma_info.rma_lock); - /* Does a valid window exist? */ - if (scif_query_window(&req)) { - dev_err(&scifdev->sdev->dev, - "%s %d -ENXIO\n", __func__, __LINE__); - msg->uop = SCIF_UNREGISTER_ACK; - goto error; - } - - scif_put_window(window, window->nr_pages); - - if (!window->ref_count) { - atomic_inc(&ep->rma_info.tw_refcount); - ep->rma_info.async_list_del = 1; - list_del_init(&window->list); - scif_free_window_offset(ep, window, window->offset); - } -error: - mutex_unlock(&ep->rma_info.rma_lock); - if (window && !window->ref_count) - scif_queue_for_cleanup(window, &scif_info.rma); -} - -/* - * Remove valid remote memory mappings created via scif_mmap(..) from the - * process address space since the remote node is lost - */ -static void __scif_zap_mmaps(struct scif_endpt *ep) -{ - struct list_head *item; - struct scif_vma_info *info; - struct vm_area_struct *vma; - unsigned long size; - - spin_lock(&ep->lock); - list_for_each(item, &ep->rma_info.vma_list) { - info = list_entry(item, struct scif_vma_info, list); - vma = info->vma; - size = vma->vm_end - vma->vm_start; - zap_vma_ptes(vma, vma->vm_start, size); - dev_dbg(scif_info.mdev.this_device, - "%s ep %p zap vma %p size 0x%lx\n", - __func__, ep, info->vma, size); - } - spin_unlock(&ep->lock); -} - -/* - * Traverse the list of endpoints for a particular remote node and - * zap valid remote memory mappings since the remote node is lost - */ -static void _scif_zap_mmaps(int node, struct list_head *head) -{ - struct scif_endpt *ep; - struct list_head *item; - - mutex_lock(&scif_info.connlock); - list_for_each(item, head) { - ep = list_entry(item, struct scif_endpt, list); - if (ep->remote_dev->node == node) - __scif_zap_mmaps(ep); - } - mutex_unlock(&scif_info.connlock); -} - -/* - * Wrapper for removing remote memory mappings for a particular node. This API - * is called by peer nodes as part of handling a lost node. - */ -void scif_zap_mmaps(int node) -{ - _scif_zap_mmaps(node, &scif_info.connected); - _scif_zap_mmaps(node, &scif_info.disconnected); -} - -/* - * This API is only called while handling a lost node: - * a) Remote node is dead. - * b) Remote memory mappings have been zapped - * So we can traverse the remote_reg_list without any locks. Since - * the window has not yet been unregistered we can drop the ref count - * and queue it to the cleanup thread. - */ -static void __scif_cleanup_rma_for_zombies(struct scif_endpt *ep) -{ - struct list_head *pos, *tmp; - struct scif_window *window; - - list_for_each_safe(pos, tmp, &ep->rma_info.remote_reg_list) { - window = list_entry(pos, struct scif_window, list); - if (window->ref_count) - scif_put_window(window, window->nr_pages); - else - dev_err(scif_info.mdev.this_device, - "%s %d unexpected\n", - __func__, __LINE__); - if (!window->ref_count) { - atomic_inc(&ep->rma_info.tw_refcount); - list_del_init(&window->list); - scif_queue_for_cleanup(window, &scif_info.rma); - } - } -} - -/* Cleanup remote registration lists for zombie endpoints */ -void scif_cleanup_rma_for_zombies(int node) -{ - struct scif_endpt *ep; - struct list_head *item; - - mutex_lock(&scif_info.eplock); - list_for_each(item, &scif_info.zombie) { - ep = list_entry(item, struct scif_endpt, list); - if (ep->remote_dev && ep->remote_dev->node == node) - __scif_cleanup_rma_for_zombies(ep); - } - mutex_unlock(&scif_info.eplock); - flush_work(&scif_info.misc_work); -} - -/* Insert the VMA into the per endpoint VMA list */ -static int scif_insert_vma(struct scif_endpt *ep, struct vm_area_struct *vma) -{ - struct scif_vma_info *info; - int err = 0; - - info = kzalloc(sizeof(*info), GFP_KERNEL); - if (!info) { - err = -ENOMEM; - goto done; - } - info->vma = vma; - spin_lock(&ep->lock); - list_add_tail(&info->list, &ep->rma_info.vma_list); - spin_unlock(&ep->lock); -done: - return err; -} - -/* Delete the VMA from the per endpoint VMA list */ -static void scif_delete_vma(struct scif_endpt *ep, struct vm_area_struct *vma) -{ - struct list_head *item; - struct scif_vma_info *info; - - spin_lock(&ep->lock); - list_for_each(item, &ep->rma_info.vma_list) { - info = list_entry(item, struct scif_vma_info, list); - if (info->vma == vma) { - list_del(&info->list); - kfree(info); - break; - } - } - spin_unlock(&ep->lock); -} - -static phys_addr_t scif_get_phys(phys_addr_t phys, struct scif_endpt *ep) -{ - struct scif_dev *scifdev = (struct scif_dev *)ep->remote_dev; - struct scif_hw_dev *sdev = scifdev->sdev; - phys_addr_t out_phys, apt_base = 0; - - /* - * If the DMA address is card relative then we need to add the - * aperture base for mmap to work correctly - */ - if (!scifdev_self(scifdev) && sdev->aper && sdev->card_rel_da) - apt_base = sdev->aper->pa; - out_phys = apt_base + phys; - return out_phys; -} - -int scif_get_pages(scif_epd_t epd, off_t offset, size_t len, - struct scif_range **pages) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - struct scif_rma_req req; - struct scif_window *window = NULL; - int nr_pages, err, i; - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI get_pinned_pages: ep %p offset 0x%lx len 0x%lx\n", - ep, offset, len); - err = scif_verify_epd(ep); - if (err) - return err; - - if (!len || (offset < 0) || - (offset + len < offset) || - (ALIGN(offset, PAGE_SIZE) != offset) || - (ALIGN(len, PAGE_SIZE) != len)) - return -EINVAL; - - nr_pages = len >> PAGE_SHIFT; - - req.out_window = &window; - req.offset = offset; - req.prot = 0; - req.nr_bytes = len; - req.type = SCIF_WINDOW_SINGLE; - req.head = &ep->rma_info.remote_reg_list; - - mutex_lock(&ep->rma_info.rma_lock); - /* Does a valid window exist? */ - err = scif_query_window(&req); - if (err) { - dev_err(&ep->remote_dev->sdev->dev, - "%s %d err %d\n", __func__, __LINE__, err); - goto error; - } - - /* Allocate scif_range */ - *pages = kzalloc(sizeof(**pages), GFP_KERNEL); - if (!*pages) { - err = -ENOMEM; - goto error; - } - - /* Allocate phys addr array */ - (*pages)->phys_addr = scif_zalloc(nr_pages * sizeof(dma_addr_t)); - if (!((*pages)->phys_addr)) { - err = -ENOMEM; - goto error; - } - - if (scif_is_mgmt_node() && !scifdev_self(ep->remote_dev)) { - /* Allocate virtual address array */ - ((*pages)->va = scif_zalloc(nr_pages * sizeof(void *))); - if (!(*pages)->va) { - err = -ENOMEM; - goto error; - } - } - /* Populate the values */ - (*pages)->cookie = window; - (*pages)->nr_pages = nr_pages; - (*pages)->prot_flags = window->prot; - - for (i = 0; i < nr_pages; i++) { - (*pages)->phys_addr[i] = - __scif_off_to_dma_addr(window, offset + - (i * PAGE_SIZE)); - (*pages)->phys_addr[i] = scif_get_phys((*pages)->phys_addr[i], - ep); - if (scif_is_mgmt_node() && !scifdev_self(ep->remote_dev)) - (*pages)->va[i] = - ep->remote_dev->sdev->aper->va + - (*pages)->phys_addr[i] - - ep->remote_dev->sdev->aper->pa; - } - - scif_get_window(window, nr_pages); -error: - mutex_unlock(&ep->rma_info.rma_lock); - if (err) { - if (*pages) { - scif_free((*pages)->phys_addr, - nr_pages * sizeof(dma_addr_t)); - scif_free((*pages)->va, - nr_pages * sizeof(void *)); - kfree(*pages); - *pages = NULL; - } - dev_err(&ep->remote_dev->sdev->dev, - "%s %d err %d\n", __func__, __LINE__, err); - } - return err; -} -EXPORT_SYMBOL_GPL(scif_get_pages); - -int scif_put_pages(struct scif_range *pages) -{ - struct scif_endpt *ep; - struct scif_window *window; - struct scifmsg msg; - - if (!pages || !pages->cookie) - return -EINVAL; - - window = pages->cookie; - - if (!window || window->magic != SCIFEP_MAGIC) - return -EINVAL; - - ep = (struct scif_endpt *)window->ep; - /* - * If the state is SCIFEP_CONNECTED or SCIFEP_DISCONNECTED then the - * callee should be allowed to release references to the pages, - * else the endpoint was not connected in the first place, - * hence the ENOTCONN. - */ - if (ep->state != SCIFEP_CONNECTED && ep->state != SCIFEP_DISCONNECTED) - return -ENOTCONN; - - mutex_lock(&ep->rma_info.rma_lock); - - scif_put_window(window, pages->nr_pages); - - /* Initiate window destruction if ref count is zero */ - if (!window->ref_count) { - list_del(&window->list); - mutex_unlock(&ep->rma_info.rma_lock); - scif_drain_dma_intr(ep->remote_dev->sdev, - ep->rma_info.dma_chan); - /* Inform the peer about this window being destroyed. */ - msg.uop = SCIF_MUNMAP; - msg.src = ep->port; - msg.payload[0] = window->peer_window; - /* No error handling for notification messages */ - scif_nodeqp_send(ep->remote_dev, &msg); - /* Destroy this window from the peer's registered AS */ - scif_destroy_remote_window(window); - } else { - mutex_unlock(&ep->rma_info.rma_lock); - } - - scif_free(pages->phys_addr, pages->nr_pages * sizeof(dma_addr_t)); - scif_free(pages->va, pages->nr_pages * sizeof(void *)); - kfree(pages); - return 0; -} -EXPORT_SYMBOL_GPL(scif_put_pages); - -/* - * scif_rma_list_mmap: - * - * Traverse the remote registration list starting from start_window: - * 1) Create VtoP mappings via remap_pfn_range(..) - * 2) Once step 1) and 2) complete successfully then traverse the range of - * windows again and bump the reference count. - * RMA lock must be held. - */ -static int scif_rma_list_mmap(struct scif_window *start_window, s64 offset, - int nr_pages, struct vm_area_struct *vma) -{ - s64 end_offset, loop_offset = offset; - struct scif_window *window = start_window; - int loop_nr_pages, nr_pages_left = nr_pages; - struct scif_endpt *ep = (struct scif_endpt *)start_window->ep; - struct list_head *head = &ep->rma_info.remote_reg_list; - int i, err = 0; - dma_addr_t phys_addr; - struct scif_window_iter src_win_iter; - size_t contig_bytes = 0; - - might_sleep(); - list_for_each_entry_from(window, head, list) { - end_offset = window->offset + - (window->nr_pages << PAGE_SHIFT); - loop_nr_pages = min_t(int, - (end_offset - loop_offset) >> PAGE_SHIFT, - nr_pages_left); - scif_init_window_iter(window, &src_win_iter); - for (i = 0; i < loop_nr_pages; i++) { - phys_addr = scif_off_to_dma_addr(window, loop_offset, - &contig_bytes, - &src_win_iter); - phys_addr = scif_get_phys(phys_addr, ep); - err = remap_pfn_range(vma, - vma->vm_start + - loop_offset - offset, - phys_addr >> PAGE_SHIFT, - PAGE_SIZE, - vma->vm_page_prot); - if (err) - goto error; - loop_offset += PAGE_SIZE; - } - nr_pages_left -= loop_nr_pages; - if (!nr_pages_left) - break; - } - /* - * No more failures expected. Bump up the ref count for all - * the windows. Another traversal from start_window required - * for handling errors encountered across windows during - * remap_pfn_range(..). - */ - loop_offset = offset; - nr_pages_left = nr_pages; - window = start_window; - head = &ep->rma_info.remote_reg_list; - list_for_each_entry_from(window, head, list) { - end_offset = window->offset + - (window->nr_pages << PAGE_SHIFT); - loop_nr_pages = min_t(int, - (end_offset - loop_offset) >> PAGE_SHIFT, - nr_pages_left); - scif_get_window(window, loop_nr_pages); - nr_pages_left -= loop_nr_pages; - loop_offset += (loop_nr_pages << PAGE_SHIFT); - if (!nr_pages_left) - break; - } -error: - if (err) - dev_err(scif_info.mdev.this_device, - "%s %d err %d\n", __func__, __LINE__, err); - return err; -} - -/* - * scif_rma_list_munmap: - * - * Traverse the remote registration list starting from window: - * 1) Decrement ref count. - * 2) If the ref count drops to zero then send a SCIF_MUNMAP message to peer. - * RMA lock must be held. - */ -static void scif_rma_list_munmap(struct scif_window *start_window, - s64 offset, int nr_pages) -{ - struct scifmsg msg; - s64 loop_offset = offset, end_offset; - int loop_nr_pages, nr_pages_left = nr_pages; - struct scif_endpt *ep = (struct scif_endpt *)start_window->ep; - struct list_head *head = &ep->rma_info.remote_reg_list; - struct scif_window *window = start_window, *_window; - - msg.uop = SCIF_MUNMAP; - msg.src = ep->port; - loop_offset = offset; - nr_pages_left = nr_pages; - list_for_each_entry_safe_from(window, _window, head, list) { - end_offset = window->offset + - (window->nr_pages << PAGE_SHIFT); - loop_nr_pages = min_t(int, - (end_offset - loop_offset) >> PAGE_SHIFT, - nr_pages_left); - scif_put_window(window, loop_nr_pages); - if (!window->ref_count) { - struct scif_dev *rdev = ep->remote_dev; - - scif_drain_dma_intr(rdev->sdev, - ep->rma_info.dma_chan); - /* Inform the peer about this munmap */ - msg.payload[0] = window->peer_window; - /* No error handling for Notification messages. */ - scif_nodeqp_send(ep->remote_dev, &msg); - list_del(&window->list); - /* Destroy this window from the peer's registered AS */ - scif_destroy_remote_window(window); - } - nr_pages_left -= loop_nr_pages; - loop_offset += (loop_nr_pages << PAGE_SHIFT); - if (!nr_pages_left) - break; - } -} - -/* - * The private data field of each VMA used to mmap a remote window - * points to an instance of struct vma_pvt - */ -struct vma_pvt { - struct scif_endpt *ep; /* End point for remote window */ - s64 offset; /* offset within remote window */ - bool valid_offset; /* offset is valid only if the original - * mmap request was for a single page - * else the offset within the vma is - * the correct offset - */ - struct kref ref; -}; - -static void vma_pvt_release(struct kref *ref) -{ - struct vma_pvt *vmapvt = container_of(ref, struct vma_pvt, ref); - - kfree(vmapvt); -} - -/** - * scif_vma_open - VMA open driver callback - * @vma: VMM memory area. - * The open method is called by the kernel to allow the subsystem implementing - * the VMA to initialize the area. This method is invoked any time a new - * reference to the VMA is made (when a process forks, for example). - * The one exception happens when the VMA is first created by mmap; - * in this case, the driver's mmap method is called instead. - * This function is also invoked when an existing VMA is split by the kernel - * due to a call to munmap on a subset of the VMA resulting in two VMAs. - * The kernel invokes this function only on one of the two VMAs. - */ -static void scif_vma_open(struct vm_area_struct *vma) -{ - struct vma_pvt *vmapvt = vma->vm_private_data; - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI vma open: vma_start 0x%lx vma_end 0x%lx\n", - vma->vm_start, vma->vm_end); - scif_insert_vma(vmapvt->ep, vma); - kref_get(&vmapvt->ref); -} - -/** - * scif_munmap - VMA close driver callback. - * @vma: VMM memory area. - * When an area is destroyed, the kernel calls its close operation. - * Note that there's no usage count associated with VMA's; the area - * is opened and closed exactly once by each process that uses it. - */ -static void scif_munmap(struct vm_area_struct *vma) -{ - struct scif_endpt *ep; - struct vma_pvt *vmapvt = vma->vm_private_data; - int nr_pages = vma_pages(vma); - s64 offset; - struct scif_rma_req req; - struct scif_window *window = NULL; - int err; - - might_sleep(); - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI munmap: vma_start 0x%lx vma_end 0x%lx\n", - vma->vm_start, vma->vm_end); - ep = vmapvt->ep; - offset = vmapvt->valid_offset ? vmapvt->offset : - (vma->vm_pgoff) << PAGE_SHIFT; - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI munmap: ep %p nr_pages 0x%x offset 0x%llx\n", - ep, nr_pages, offset); - req.out_window = &window; - req.offset = offset; - req.nr_bytes = vma->vm_end - vma->vm_start; - req.prot = vma->vm_flags & (VM_READ | VM_WRITE); - req.type = SCIF_WINDOW_PARTIAL; - req.head = &ep->rma_info.remote_reg_list; - - mutex_lock(&ep->rma_info.rma_lock); - - err = scif_query_window(&req); - if (err) - dev_err(scif_info.mdev.this_device, - "%s %d err %d\n", __func__, __LINE__, err); - else - scif_rma_list_munmap(window, offset, nr_pages); - - mutex_unlock(&ep->rma_info.rma_lock); - /* - * The kernel probably zeroes these out but we still want - * to clean up our own mess just in case. - */ - vma->vm_ops = NULL; - vma->vm_private_data = NULL; - kref_put(&vmapvt->ref, vma_pvt_release); - scif_delete_vma(ep, vma); -} - -static const struct vm_operations_struct scif_vm_ops = { - .open = scif_vma_open, - .close = scif_munmap, -}; - -/** - * scif_mmap - Map pages in virtual address space to a remote window. - * @vma: VMM memory area. - * @epd: endpoint descriptor - * - * Return: Upon successful completion, scif_mmap() returns zero - * else an apt error is returned as documented in scif.h - */ -int scif_mmap(struct vm_area_struct *vma, scif_epd_t epd) -{ - struct scif_rma_req req; - struct scif_window *window = NULL; - struct scif_endpt *ep = (struct scif_endpt *)epd; - s64 start_offset = vma->vm_pgoff << PAGE_SHIFT; - int nr_pages = vma_pages(vma); - int err; - struct vma_pvt *vmapvt; - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI mmap: ep %p start_offset 0x%llx nr_pages 0x%x\n", - ep, start_offset, nr_pages); - err = scif_verify_epd(ep); - if (err) - return err; - - might_sleep(); - - err = scif_insert_vma(ep, vma); - if (err) - return err; - - vmapvt = kzalloc(sizeof(*vmapvt), GFP_KERNEL); - if (!vmapvt) { - scif_delete_vma(ep, vma); - return -ENOMEM; - } - - vmapvt->ep = ep; - kref_init(&vmapvt->ref); - - req.out_window = &window; - req.offset = start_offset; - req.nr_bytes = vma->vm_end - vma->vm_start; - req.prot = vma->vm_flags & (VM_READ | VM_WRITE); - req.type = SCIF_WINDOW_PARTIAL; - req.head = &ep->rma_info.remote_reg_list; - - mutex_lock(&ep->rma_info.rma_lock); - /* Does a valid window exist? */ - err = scif_query_window(&req); - if (err) { - dev_err(&ep->remote_dev->sdev->dev, - "%s %d err %d\n", __func__, __LINE__, err); - goto error_unlock; - } - - /* Default prot for loopback */ - if (!scifdev_self(ep->remote_dev)) - vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); - - /* - * VM_DONTCOPY - Do not copy this vma on fork - * VM_DONTEXPAND - Cannot expand with mremap() - * VM_RESERVED - Count as reserved_vm like IO - * VM_PFNMAP - Page-ranges managed without "struct page" - * VM_IO - Memory mapped I/O or similar - * - * We do not want to copy this VMA automatically on a fork(), - * expand this VMA due to mremap() or swap out these pages since - * the VMA is actually backed by physical pages in the remote - * node's physical memory and not via a struct page. - */ - vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND | VM_DONTDUMP; - - if (!scifdev_self(ep->remote_dev)) - vma->vm_flags |= VM_IO | VM_PFNMAP; - - /* Map this range of windows */ - err = scif_rma_list_mmap(window, start_offset, nr_pages, vma); - if (err) { - dev_err(&ep->remote_dev->sdev->dev, - "%s %d err %d\n", __func__, __LINE__, err); - goto error_unlock; - } - /* Set up the driver call back */ - vma->vm_ops = &scif_vm_ops; - vma->vm_private_data = vmapvt; -error_unlock: - mutex_unlock(&ep->rma_info.rma_lock); - if (err) { - kfree(vmapvt); - dev_err(&ep->remote_dev->sdev->dev, - "%s %d err %d\n", __func__, __LINE__, err); - scif_delete_vma(ep, vma); - } - return err; -} diff --git a/drivers/misc/mic/scif/scif_nm.c b/drivers/misc/mic/scif/scif_nm.c deleted file mode 100644 index c4d9422082b7..000000000000 --- a/drivers/misc/mic/scif/scif_nm.c +++ /dev/null @@ -1,229 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel SCIF driver. - */ -#include "scif_peer_bus.h" - -#include "scif_main.h" -#include "scif_map.h" - -/** - * scif_invalidate_ep() - Set state for all connected endpoints - * to disconnected and wake up all send/recv waitqueues - * - * @node: Node to invalidate - */ -static void scif_invalidate_ep(int node) -{ - struct scif_endpt *ep; - struct list_head *pos, *tmpq; - - flush_work(&scif_info.conn_work); - mutex_lock(&scif_info.connlock); - list_for_each_safe(pos, tmpq, &scif_info.disconnected) { - ep = list_entry(pos, struct scif_endpt, list); - if (ep->remote_dev->node == node) { - scif_unmap_all_windows(ep); - spin_lock(&ep->lock); - scif_cleanup_ep_qp(ep); - spin_unlock(&ep->lock); - } - } - list_for_each_safe(pos, tmpq, &scif_info.connected) { - ep = list_entry(pos, struct scif_endpt, list); - if (ep->remote_dev->node == node) { - list_del(pos); - spin_lock(&ep->lock); - ep->state = SCIFEP_DISCONNECTED; - list_add_tail(&ep->list, &scif_info.disconnected); - scif_cleanup_ep_qp(ep); - wake_up_interruptible(&ep->sendwq); - wake_up_interruptible(&ep->recvwq); - spin_unlock(&ep->lock); - scif_unmap_all_windows(ep); - } - } - mutex_unlock(&scif_info.connlock); -} - -void scif_free_qp(struct scif_dev *scifdev) -{ - struct scif_qp *qp = scifdev->qpairs; - - if (!qp) - return; - scif_unmap_single(qp->local_buf, scifdev, qp->inbound_q.size); - kfree(qp->inbound_q.rb_base); - scif_unmap_single(qp->local_qp, scifdev, sizeof(struct scif_qp)); - kfree(scifdev->qpairs); - scifdev->qpairs = NULL; -} - -static void scif_cleanup_qp(struct scif_dev *dev) -{ - struct scif_qp *qp = &dev->qpairs[0]; - - if (!qp) - return; - scif_iounmap((void *)qp->remote_qp, sizeof(struct scif_qp), dev); - scif_iounmap((void *)qp->outbound_q.rb_base, - sizeof(struct scif_qp), dev); - qp->remote_qp = NULL; - qp->local_write = 0; - qp->inbound_q.current_write_offset = 0; - qp->inbound_q.current_read_offset = 0; - if (scifdev_is_p2p(dev)) - scif_free_qp(dev); -} - -void scif_send_acks(struct scif_dev *dev) -{ - struct scifmsg msg; - - if (dev->node_remove_ack_pending) { - msg.uop = SCIF_NODE_REMOVE_ACK; - msg.src.node = scif_info.nodeid; - msg.dst.node = SCIF_MGMT_NODE; - msg.payload[0] = dev->node; - scif_nodeqp_send(&scif_dev[SCIF_MGMT_NODE], &msg); - dev->node_remove_ack_pending = false; - } - if (dev->exit_ack_pending) { - msg.uop = SCIF_EXIT_ACK; - msg.src.node = scif_info.nodeid; - msg.dst.node = dev->node; - scif_nodeqp_send(dev, &msg); - dev->exit_ack_pending = false; - } -} - -/** - * scif_cleanup_scifdev - Uninitialize SCIF data structures for remote - * SCIF device. - * @dev: Remote SCIF device. - */ -void scif_cleanup_scifdev(struct scif_dev *dev) -{ - struct scif_hw_dev *sdev = dev->sdev; - - if (!dev->sdev) - return; - if (scifdev_is_p2p(dev)) { - if (dev->cookie) { - sdev->hw_ops->free_irq(sdev, dev->cookie, dev); - dev->cookie = NULL; - } - scif_destroy_intr_wq(dev); - } - flush_work(&scif_info.misc_work); - scif_destroy_p2p(dev); - scif_invalidate_ep(dev->node); - scif_zap_mmaps(dev->node); - scif_cleanup_rma_for_zombies(dev->node); - flush_work(&scif_info.misc_work); - scif_send_acks(dev); - if (!dev->node && scif_info.card_initiated_exit) { - /* - * Send an SCIF_EXIT message which is the last message from MIC - * to the Host and wait for a SCIF_EXIT_ACK - */ - scif_send_exit(dev); - scif_info.card_initiated_exit = false; - } - scif_cleanup_qp(dev); -} - -/** - * scif_remove_node - * - * @node: Node to remove - */ -void scif_handle_remove_node(int node) -{ - struct scif_dev *scifdev = &scif_dev[node]; - - if (scif_peer_unregister_device(scifdev)) - scif_send_acks(scifdev); -} - -static int scif_send_rmnode_msg(int node, int remove_node) -{ - struct scifmsg notif_msg; - struct scif_dev *dev = &scif_dev[node]; - - notif_msg.uop = SCIF_NODE_REMOVE; - notif_msg.src.node = scif_info.nodeid; - notif_msg.dst.node = node; - notif_msg.payload[0] = remove_node; - return scif_nodeqp_send(dev, ¬if_msg); -} - -/** - * scif_node_disconnect - * - * @node_id: source node id [in] - * @mgmt_initiated: Disconnection initiated from the mgmt node - * - * Disconnect a node from the scif network. - */ -void scif_disconnect_node(u32 node_id, bool mgmt_initiated) -{ - int ret; - int msg_cnt = 0; - u32 i = 0; - struct scif_dev *scifdev = &scif_dev[node_id]; - - if (!node_id) - return; - - atomic_set(&scifdev->disconn_rescnt, 0); - - /* Destroy p2p network */ - for (i = 1; i <= scif_info.maxid; i++) { - if (i == node_id) - continue; - ret = scif_send_rmnode_msg(i, node_id); - if (!ret) - msg_cnt++; - } - /* Wait for the remote nodes to respond with SCIF_NODE_REMOVE_ACK */ - ret = wait_event_timeout(scifdev->disconn_wq, - (atomic_read(&scifdev->disconn_rescnt) - == msg_cnt), SCIF_NODE_ALIVE_TIMEOUT); - /* Tell the card to clean up */ - if (mgmt_initiated && _scifdev_alive(scifdev)) - /* - * Send an SCIF_EXIT message which is the last message from Host - * to the MIC and wait for a SCIF_EXIT_ACK - */ - scif_send_exit(scifdev); - atomic_set(&scifdev->disconn_rescnt, 0); - /* Tell the mgmt node to clean up */ - ret = scif_send_rmnode_msg(SCIF_MGMT_NODE, node_id); - if (!ret) - /* Wait for mgmt node to respond with SCIF_NODE_REMOVE_ACK */ - wait_event_timeout(scifdev->disconn_wq, - (atomic_read(&scifdev->disconn_rescnt) == 1), - SCIF_NODE_ALIVE_TIMEOUT); -} - -void scif_get_node_info(void) -{ - struct scifmsg msg; - DECLARE_COMPLETION_ONSTACK(node_info); - - msg.uop = SCIF_GET_NODE_INFO; - msg.src.node = scif_info.nodeid; - msg.dst.node = SCIF_MGMT_NODE; - msg.payload[3] = (u64)&node_info; - - if ((scif_nodeqp_send(&scif_dev[SCIF_MGMT_NODE], &msg))) - return; - - /* Wait for a response with SCIF_GET_NODE_INFO */ - wait_for_completion(&node_info); -} diff --git a/drivers/misc/mic/scif/scif_nodeqp.c b/drivers/misc/mic/scif/scif_nodeqp.c deleted file mode 100644 index 384ce08fa98a..000000000000 --- a/drivers/misc/mic/scif/scif_nodeqp.c +++ /dev/null @@ -1,1349 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel SCIF driver. - */ -#include "../bus/scif_bus.h" -#include "scif_peer_bus.h" -#include "scif_main.h" -#include "scif_nodeqp.h" -#include "scif_map.h" - -/* - ************************************************************************ - * SCIF node Queue Pair (QP) setup flow: - * - * 1) SCIF driver gets probed with a scif_hw_dev via the scif_hw_bus - * 2) scif_setup_qp(..) allocates the local qp and calls - * scif_setup_qp_connect(..) which allocates and maps the local - * buffer for the inbound QP - * 3) The local node updates the device page with the DMA address of the QP - * 4) A delayed work is scheduled (qp_dwork) which periodically reads if - * the peer node has updated its QP DMA address - * 5) Once a valid non zero address is found in the QP DMA address field - * in the device page, the local node maps the remote node's QP, - * updates its outbound QP and sends a SCIF_INIT message to the peer - * 6) The SCIF_INIT message is received by the peer node QP interrupt bottom - * half handler by calling scif_init(..) - * 7) scif_init(..) registers a new SCIF peer node by calling - * scif_peer_register_device(..) which signifies the addition of a new - * SCIF node - * 8) On the mgmt node, P2P network setup/teardown is initiated if all the - * remote nodes are online via scif_p2p_setup(..) - * 9) For P2P setup, the host maps the remote nodes' aperture and memory - * bars and sends a SCIF_NODE_ADD message to both nodes - * 10) As part of scif_nodeadd, both nodes set up their local inbound - * QPs and send a SCIF_NODE_ADD_ACK to the mgmt node - * 11) As part of scif_node_add_ack(..) the mgmt node forwards the - * SCIF_NODE_ADD_ACK to the remote nodes - * 12) As part of scif_node_add_ack(..) the remote nodes update their - * outbound QPs, make sure they can access memory on the remote node - * and then add a new SCIF peer node by calling - * scif_peer_register_device(..) which signifies the addition of a new - * SCIF node. - * 13) The SCIF network is now established across all nodes. - * - ************************************************************************ - * SCIF node QP teardown flow (initiated by non mgmt node): - * - * 1) SCIF driver gets a remove callback with a scif_hw_dev via the scif_hw_bus - * 2) The device page QP DMA address field is updated with 0x0 - * 3) A non mgmt node now cleans up all local data structures and sends a - * SCIF_EXIT message to the peer and waits for a SCIF_EXIT_ACK - * 4) As part of scif_exit(..) handling scif_disconnect_node(..) is called - * 5) scif_disconnect_node(..) sends a SCIF_NODE_REMOVE message to all the - * peers and waits for a SCIF_NODE_REMOVE_ACK - * 6) As part of scif_node_remove(..) a remote node unregisters the peer - * node from the SCIF network and sends a SCIF_NODE_REMOVE_ACK - * 7) When the mgmt node has received all the SCIF_NODE_REMOVE_ACKs - * it sends itself a node remove message whose handling cleans up local - * data structures and unregisters the peer node from the SCIF network - * 8) The mgmt node sends a SCIF_EXIT_ACK - * 9) Upon receipt of the SCIF_EXIT_ACK the node initiating the teardown - * completes the SCIF remove routine - * 10) The SCIF network is now torn down for the node initiating the - * teardown sequence - * - ************************************************************************ - * SCIF node QP teardown flow (initiated by mgmt node): - * - * 1) SCIF driver gets a remove callback with a scif_hw_dev via the scif_hw_bus - * 2) The device page QP DMA address field is updated with 0x0 - * 3) The mgmt node calls scif_disconnect_node(..) - * 4) scif_disconnect_node(..) sends a SCIF_NODE_REMOVE message to all the peers - * and waits for a SCIF_NODE_REMOVE_ACK - * 5) As part of scif_node_remove(..) a remote node unregisters the peer - * node from the SCIF network and sends a SCIF_NODE_REMOVE_ACK - * 6) When the mgmt node has received all the SCIF_NODE_REMOVE_ACKs - * it unregisters the peer node from the SCIF network - * 7) The mgmt node sends a SCIF_EXIT message and waits for a SCIF_EXIT_ACK. - * 8) A non mgmt node upon receipt of a SCIF_EXIT message calls scif_stop(..) - * which would clean up local data structures for all SCIF nodes and - * then send a SCIF_EXIT_ACK back to the mgmt node - * 9) Upon receipt of the SCIF_EXIT_ACK the the mgmt node sends itself a node - * remove message whose handling cleans up local data structures and - * destroys any P2P mappings. - * 10) The SCIF hardware device for which a remove callback was received is now - * disconnected from the SCIF network. - */ -/* - * Initializes "local" data structures for the QP. Allocates the QP - * ring buffer (rb) and initializes the "in bound" queue. - */ -int scif_setup_qp_connect(struct scif_qp *qp, dma_addr_t *qp_offset, - int local_size, struct scif_dev *scifdev) -{ - void *local_q = qp->inbound_q.rb_base; - int err = 0; - u32 tmp_rd = 0; - - spin_lock_init(&qp->send_lock); - spin_lock_init(&qp->recv_lock); - - /* Allocate rb only if not already allocated */ - if (!local_q) { - local_q = kzalloc(local_size, GFP_KERNEL); - if (!local_q) { - err = -ENOMEM; - return err; - } - } - - err = scif_map_single(&qp->local_buf, local_q, scifdev, local_size); - if (err) - goto kfree; - /* - * To setup the inbound_q, the buffer lives locally, the read pointer - * is remote and the write pointer is local. - */ - scif_rb_init(&qp->inbound_q, - &tmp_rd, - &qp->local_write, - local_q, get_count_order(local_size)); - /* - * The read pointer is NULL initially and it is unsafe to use the ring - * buffer til this changes! - */ - qp->inbound_q.read_ptr = NULL; - err = scif_map_single(qp_offset, qp, - scifdev, sizeof(struct scif_qp)); - if (err) - goto unmap; - qp->local_qp = *qp_offset; - return err; -unmap: - scif_unmap_single(qp->local_buf, scifdev, local_size); - qp->local_buf = 0; -kfree: - kfree(local_q); - return err; -} - -/* When the other side has already done it's allocation, this is called */ -int scif_setup_qp_accept(struct scif_qp *qp, dma_addr_t *qp_offset, - dma_addr_t phys, int local_size, - struct scif_dev *scifdev) -{ - void *local_q; - void *remote_q; - struct scif_qp *remote_qp; - int remote_size; - int err = 0; - - spin_lock_init(&qp->send_lock); - spin_lock_init(&qp->recv_lock); - /* Start by figuring out where we need to point */ - remote_qp = scif_ioremap(phys, sizeof(struct scif_qp), scifdev); - if (!remote_qp) - return -EIO; - qp->remote_qp = remote_qp; - if (qp->remote_qp->magic != SCIFEP_MAGIC) { - err = -EIO; - goto iounmap; - } - qp->remote_buf = remote_qp->local_buf; - remote_size = qp->remote_qp->inbound_q.size; - remote_q = scif_ioremap(qp->remote_buf, remote_size, scifdev); - if (!remote_q) { - err = -EIO; - goto iounmap; - } - qp->remote_qp->local_write = 0; - /* - * To setup the outbound_q, the buffer lives in remote memory, - * the read pointer is local, the write pointer is remote - */ - scif_rb_init(&qp->outbound_q, - &qp->local_read, - &qp->remote_qp->local_write, - remote_q, - get_count_order(remote_size)); - local_q = kzalloc(local_size, GFP_KERNEL); - if (!local_q) { - err = -ENOMEM; - goto iounmap_1; - } - err = scif_map_single(&qp->local_buf, local_q, scifdev, local_size); - if (err) - goto kfree; - qp->remote_qp->local_read = 0; - /* - * To setup the inbound_q, the buffer lives locally, the read pointer - * is remote and the write pointer is local - */ - scif_rb_init(&qp->inbound_q, - &qp->remote_qp->local_read, - &qp->local_write, - local_q, get_count_order(local_size)); - err = scif_map_single(qp_offset, qp, scifdev, - sizeof(struct scif_qp)); - if (err) - goto unmap; - qp->local_qp = *qp_offset; - return err; -unmap: - scif_unmap_single(qp->local_buf, scifdev, local_size); - qp->local_buf = 0; -kfree: - kfree(local_q); -iounmap_1: - scif_iounmap(remote_q, remote_size, scifdev); - qp->outbound_q.rb_base = NULL; -iounmap: - scif_iounmap(qp->remote_qp, sizeof(struct scif_qp), scifdev); - qp->remote_qp = NULL; - return err; -} - -int scif_setup_qp_connect_response(struct scif_dev *scifdev, - struct scif_qp *qp, u64 payload) -{ - int err = 0; - void *r_buf; - int remote_size; - phys_addr_t tmp_phys; - - qp->remote_qp = scif_ioremap(payload, sizeof(struct scif_qp), scifdev); - - if (!qp->remote_qp) { - err = -ENOMEM; - goto error; - } - - if (qp->remote_qp->magic != SCIFEP_MAGIC) { - dev_err(&scifdev->sdev->dev, - "SCIFEP_MAGIC mismatch between self %d remote %d\n", - scif_dev[scif_info.nodeid].node, scifdev->node); - err = -ENODEV; - goto error; - } - - tmp_phys = qp->remote_qp->local_buf; - remote_size = qp->remote_qp->inbound_q.size; - r_buf = scif_ioremap(tmp_phys, remote_size, scifdev); - - if (!r_buf) - return -EIO; - - qp->local_read = 0; - scif_rb_init(&qp->outbound_q, - &qp->local_read, - &qp->remote_qp->local_write, - r_buf, - get_count_order(remote_size)); - /* - * Because the node QP may already be processing an INIT message, set - * the read pointer so the cached read offset isn't lost - */ - qp->remote_qp->local_read = qp->inbound_q.current_read_offset; - /* - * resetup the inbound_q now that we know where the - * inbound_read really is. - */ - scif_rb_init(&qp->inbound_q, - &qp->remote_qp->local_read, - &qp->local_write, - qp->inbound_q.rb_base, - get_count_order(qp->inbound_q.size)); -error: - return err; -} - -static __always_inline void -scif_send_msg_intr(struct scif_dev *scifdev) -{ - struct scif_hw_dev *sdev = scifdev->sdev; - - if (scifdev_is_p2p(scifdev)) - sdev->hw_ops->send_p2p_intr(sdev, scifdev->rdb, &scifdev->mmio); - else - sdev->hw_ops->send_intr(sdev, scifdev->rdb); -} - -int scif_qp_response(phys_addr_t phys, struct scif_dev *scifdev) -{ - int err = 0; - struct scifmsg msg; - - err = scif_setup_qp_connect_response(scifdev, scifdev->qpairs, phys); - if (!err) { - /* - * Now that everything is setup and mapped, we're ready - * to tell the peer about our queue's location - */ - msg.uop = SCIF_INIT; - msg.dst.node = scifdev->node; - err = scif_nodeqp_send(scifdev, &msg); - } - return err; -} - -void scif_send_exit(struct scif_dev *scifdev) -{ - struct scifmsg msg; - int ret; - - scifdev->exit = OP_IN_PROGRESS; - msg.uop = SCIF_EXIT; - msg.src.node = scif_info.nodeid; - msg.dst.node = scifdev->node; - ret = scif_nodeqp_send(scifdev, &msg); - if (ret) - goto done; - /* Wait for a SCIF_EXIT_ACK message */ - wait_event_timeout(scif_info.exitwq, scifdev->exit == OP_COMPLETED, - SCIF_NODE_ALIVE_TIMEOUT); -done: - scifdev->exit = OP_IDLE; -} - -int scif_setup_qp(struct scif_dev *scifdev) -{ - int err = 0; - int local_size; - struct scif_qp *qp; - - local_size = SCIF_NODE_QP_SIZE; - - qp = kzalloc(sizeof(*qp), GFP_KERNEL); - if (!qp) { - err = -ENOMEM; - return err; - } - qp->magic = SCIFEP_MAGIC; - scifdev->qpairs = qp; - err = scif_setup_qp_connect(qp, &scifdev->qp_dma_addr, - local_size, scifdev); - if (err) - goto free_qp; - /* - * We're as setup as we can be. The inbound_q is setup, w/o a usable - * outbound q. When we get a message, the read_ptr will be updated, - * and we will pull the message. - */ - return err; -free_qp: - kfree(scifdev->qpairs); - scifdev->qpairs = NULL; - return err; -} - -static void scif_p2p_freesg(struct scatterlist *sg) -{ - kfree(sg); -} - -static struct scatterlist * -scif_p2p_setsg(phys_addr_t pa, int page_size, int page_cnt) -{ - struct scatterlist *sg; - struct page *page; - int i; - - sg = kmalloc_array(page_cnt, sizeof(struct scatterlist), GFP_KERNEL); - if (!sg) - return NULL; - sg_init_table(sg, page_cnt); - for (i = 0; i < page_cnt; i++) { - page = pfn_to_page(pa >> PAGE_SHIFT); - sg_set_page(&sg[i], page, page_size, 0); - pa += page_size; - } - return sg; -} - -/* Init p2p mappings required to access peerdev from scifdev */ -static struct scif_p2p_info * -scif_init_p2p_info(struct scif_dev *scifdev, struct scif_dev *peerdev) -{ - struct scif_p2p_info *p2p; - int num_mmio_pages, num_aper_pages, sg_page_shift, err, num_aper_chunks; - struct scif_hw_dev *psdev = peerdev->sdev; - struct scif_hw_dev *sdev = scifdev->sdev; - - num_mmio_pages = psdev->mmio->len >> PAGE_SHIFT; - num_aper_pages = psdev->aper->len >> PAGE_SHIFT; - - p2p = kzalloc(sizeof(*p2p), GFP_KERNEL); - if (!p2p) - return NULL; - p2p->ppi_sg[SCIF_PPI_MMIO] = scif_p2p_setsg(psdev->mmio->pa, - PAGE_SIZE, num_mmio_pages); - if (!p2p->ppi_sg[SCIF_PPI_MMIO]) - goto free_p2p; - p2p->sg_nentries[SCIF_PPI_MMIO] = num_mmio_pages; - sg_page_shift = get_order(min(psdev->aper->len, (u64)(1 << 30))); - num_aper_chunks = num_aper_pages >> (sg_page_shift - PAGE_SHIFT); - p2p->ppi_sg[SCIF_PPI_APER] = scif_p2p_setsg(psdev->aper->pa, - 1 << sg_page_shift, - num_aper_chunks); - p2p->sg_nentries[SCIF_PPI_APER] = num_aper_chunks; - err = dma_map_sg(&sdev->dev, p2p->ppi_sg[SCIF_PPI_MMIO], - num_mmio_pages, PCI_DMA_BIDIRECTIONAL); - if (err != num_mmio_pages) - goto scif_p2p_free; - err = dma_map_sg(&sdev->dev, p2p->ppi_sg[SCIF_PPI_APER], - num_aper_chunks, PCI_DMA_BIDIRECTIONAL); - if (err != num_aper_chunks) - goto dma_unmap; - p2p->ppi_da[SCIF_PPI_MMIO] = sg_dma_address(p2p->ppi_sg[SCIF_PPI_MMIO]); - p2p->ppi_da[SCIF_PPI_APER] = sg_dma_address(p2p->ppi_sg[SCIF_PPI_APER]); - p2p->ppi_len[SCIF_PPI_MMIO] = num_mmio_pages; - p2p->ppi_len[SCIF_PPI_APER] = num_aper_pages; - p2p->ppi_peer_id = peerdev->node; - return p2p; -dma_unmap: - dma_unmap_sg(&sdev->dev, p2p->ppi_sg[SCIF_PPI_MMIO], - p2p->sg_nentries[SCIF_PPI_MMIO], DMA_BIDIRECTIONAL); -scif_p2p_free: - scif_p2p_freesg(p2p->ppi_sg[SCIF_PPI_MMIO]); - scif_p2p_freesg(p2p->ppi_sg[SCIF_PPI_APER]); -free_p2p: - kfree(p2p); - return NULL; -} - -/* Uninitialize and release resources from a p2p mapping */ -static void scif_deinit_p2p_info(struct scif_dev *scifdev, - struct scif_p2p_info *p2p) -{ - struct scif_hw_dev *sdev = scifdev->sdev; - - dma_unmap_sg(&sdev->dev, p2p->ppi_sg[SCIF_PPI_MMIO], - p2p->sg_nentries[SCIF_PPI_MMIO], DMA_BIDIRECTIONAL); - dma_unmap_sg(&sdev->dev, p2p->ppi_sg[SCIF_PPI_APER], - p2p->sg_nentries[SCIF_PPI_APER], DMA_BIDIRECTIONAL); - scif_p2p_freesg(p2p->ppi_sg[SCIF_PPI_MMIO]); - scif_p2p_freesg(p2p->ppi_sg[SCIF_PPI_APER]); - kfree(p2p); -} - -/** - * scif_node_connect: Respond to SCIF_NODE_CONNECT interrupt message - * @scifdev: SCIF device - * @dst: Destination node - * - * Connect the src and dst node by setting up the p2p connection - * between them. Management node here acts like a proxy. - */ -static void scif_node_connect(struct scif_dev *scifdev, int dst) -{ - struct scif_dev *dev_j = scifdev; - struct scif_dev *dev_i = NULL; - struct scif_p2p_info *p2p_ij = NULL; /* bus addr for j from i */ - struct scif_p2p_info *p2p_ji = NULL; /* bus addr for i from j */ - struct scif_p2p_info *p2p; - struct list_head *pos, *tmp; - struct scifmsg msg; - int err; - u64 tmppayload; - - if (dst < 1 || dst > scif_info.maxid) - return; - - dev_i = &scif_dev[dst]; - - if (!_scifdev_alive(dev_i)) - return; - /* - * If the p2p connection is already setup or in the process of setting - * up then just ignore this request. The requested node will get - * informed by SCIF_NODE_ADD_ACK or SCIF_NODE_ADD_NACK - */ - if (!list_empty(&dev_i->p2p)) { - list_for_each_safe(pos, tmp, &dev_i->p2p) { - p2p = list_entry(pos, struct scif_p2p_info, ppi_list); - if (p2p->ppi_peer_id == dev_j->node) - return; - } - } - p2p_ij = scif_init_p2p_info(dev_i, dev_j); - if (!p2p_ij) - return; - p2p_ji = scif_init_p2p_info(dev_j, dev_i); - if (!p2p_ji) { - scif_deinit_p2p_info(dev_i, p2p_ij); - return; - } - list_add_tail(&p2p_ij->ppi_list, &dev_i->p2p); - list_add_tail(&p2p_ji->ppi_list, &dev_j->p2p); - - /* - * Send a SCIF_NODE_ADD to dev_i, pass it its bus address - * as seen from dev_j - */ - msg.uop = SCIF_NODE_ADD; - msg.src.node = dev_j->node; - msg.dst.node = dev_i->node; - - msg.payload[0] = p2p_ji->ppi_da[SCIF_PPI_APER]; - msg.payload[1] = p2p_ij->ppi_da[SCIF_PPI_MMIO]; - msg.payload[2] = p2p_ij->ppi_da[SCIF_PPI_APER]; - msg.payload[3] = p2p_ij->ppi_len[SCIF_PPI_APER] << PAGE_SHIFT; - - err = scif_nodeqp_send(dev_i, &msg); - if (err) { - dev_err(&scifdev->sdev->dev, - "%s %d error %d\n", __func__, __LINE__, err); - return; - } - - /* Same as above but to dev_j */ - msg.uop = SCIF_NODE_ADD; - msg.src.node = dev_i->node; - msg.dst.node = dev_j->node; - - tmppayload = msg.payload[0]; - msg.payload[0] = msg.payload[2]; - msg.payload[2] = tmppayload; - msg.payload[1] = p2p_ji->ppi_da[SCIF_PPI_MMIO]; - msg.payload[3] = p2p_ji->ppi_len[SCIF_PPI_APER] << PAGE_SHIFT; - - scif_nodeqp_send(dev_j, &msg); -} - -static void scif_p2p_setup(void) -{ - int i, j; - - if (!scif_info.p2p_enable) - return; - - for (i = 1; i <= scif_info.maxid; i++) - if (!_scifdev_alive(&scif_dev[i])) - return; - - for (i = 1; i <= scif_info.maxid; i++) { - for (j = 1; j <= scif_info.maxid; j++) { - struct scif_dev *scifdev = &scif_dev[i]; - - if (i == j) - continue; - scif_node_connect(scifdev, j); - } - } -} - -static char *message_types[] = {"BAD", - "INIT", - "EXIT", - "SCIF_EXIT_ACK", - "SCIF_NODE_ADD", - "SCIF_NODE_ADD_ACK", - "SCIF_NODE_ADD_NACK", - "REMOVE_NODE", - "REMOVE_NODE_ACK", - "CNCT_REQ", - "CNCT_GNT", - "CNCT_GNTACK", - "CNCT_GNTNACK", - "CNCT_REJ", - "DISCNCT", - "DISCNT_ACK", - "CLIENT_SENT", - "CLIENT_RCVD", - "SCIF_GET_NODE_INFO", - "REGISTER", - "REGISTER_ACK", - "REGISTER_NACK", - "UNREGISTER", - "UNREGISTER_ACK", - "UNREGISTER_NACK", - "ALLOC_REQ", - "ALLOC_GNT", - "ALLOC_REJ", - "FREE_PHYS", - "FREE_VIRT", - "MUNMAP", - "MARK", - "MARK_ACK", - "MARK_NACK", - "WAIT", - "WAIT_ACK", - "WAIT_NACK", - "SIGNAL_LOCAL", - "SIGNAL_REMOTE", - "SIG_ACK", - "SIG_NACK"}; - -static void -scif_display_message(struct scif_dev *scifdev, struct scifmsg *msg, - const char *label) -{ - if (!scif_info.en_msg_log) - return; - if (msg->uop > SCIF_MAX_MSG) { - dev_err(&scifdev->sdev->dev, - "%s: unknown msg type %d\n", label, msg->uop); - return; - } - dev_info(&scifdev->sdev->dev, - "%s: msg type %s, src %d:%d, dest %d:%d payload 0x%llx:0x%llx:0x%llx:0x%llx\n", - label, message_types[msg->uop], msg->src.node, msg->src.port, - msg->dst.node, msg->dst.port, msg->payload[0], msg->payload[1], - msg->payload[2], msg->payload[3]); -} - -int _scif_nodeqp_send(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_qp *qp = scifdev->qpairs; - int err = -ENOMEM, loop_cnt = 0; - - scif_display_message(scifdev, msg, "Sent"); - if (!qp) { - err = -EINVAL; - goto error; - } - spin_lock(&qp->send_lock); - - while ((err = scif_rb_write(&qp->outbound_q, - msg, sizeof(struct scifmsg)))) { - mdelay(1); -#define SCIF_NODEQP_SEND_TO_MSEC (3 * 1000) - if (loop_cnt++ > (SCIF_NODEQP_SEND_TO_MSEC)) { - err = -ENODEV; - break; - } - } - if (!err) - scif_rb_commit(&qp->outbound_q); - spin_unlock(&qp->send_lock); - if (!err) { - if (scifdev_self(scifdev)) - /* - * For loopback we need to emulate an interrupt by - * queuing work for the queue handling real node - * Qp interrupts. - */ - queue_work(scifdev->intr_wq, &scifdev->intr_bh); - else - scif_send_msg_intr(scifdev); - } -error: - if (err) - dev_dbg(&scifdev->sdev->dev, - "%s %d error %d uop %d\n", - __func__, __LINE__, err, msg->uop); - return err; -} - -/** - * scif_nodeqp_send - Send a message on the node queue pair - * @scifdev: Scif Device. - * @msg: The message to be sent. - */ -int scif_nodeqp_send(struct scif_dev *scifdev, struct scifmsg *msg) -{ - int err; - struct device *spdev = NULL; - - if (msg->uop > SCIF_EXIT_ACK) { - /* Don't send messages once the exit flow has begun */ - if (OP_IDLE != scifdev->exit) - return -ENODEV; - spdev = scif_get_peer_dev(scifdev); - if (IS_ERR(spdev)) { - err = PTR_ERR(spdev); - return err; - } - } - err = _scif_nodeqp_send(scifdev, msg); - if (msg->uop > SCIF_EXIT_ACK) - scif_put_peer_dev(spdev); - return err; -} - -/* - * scif_misc_handler: - * - * Work queue handler for servicing miscellaneous SCIF tasks. - * Examples include: - * 1) Remote fence requests. - * 2) Destruction of temporary registered windows - * created during scif_vreadfrom()/scif_vwriteto(). - * 3) Cleanup of zombie endpoints. - */ -void scif_misc_handler(struct work_struct *work) -{ - scif_rma_handle_remote_fences(); - scif_rma_destroy_windows(); - scif_rma_destroy_tcw_invalid(); - scif_cleanup_zombie_epd(); -} - -/** - * scif_init() - Respond to SCIF_INIT interrupt message - * @scifdev: Remote SCIF device node - * @msg: Interrupt message - */ -static __always_inline void -scif_init(struct scif_dev *scifdev, struct scifmsg *msg) -{ - /* - * Allow the thread waiting for device page updates for the peer QP DMA - * address to complete initializing the inbound_q. - */ - flush_delayed_work(&scifdev->qp_dwork); - - scif_peer_register_device(scifdev); - - if (scif_is_mgmt_node()) { - mutex_lock(&scif_info.conflock); - scif_p2p_setup(); - mutex_unlock(&scif_info.conflock); - } -} - -/** - * scif_exit() - Respond to SCIF_EXIT interrupt message - * @scifdev: Remote SCIF device node - * @unused: Interrupt message (unused) - * - * This function stops the SCIF interface for the node which sent - * the SCIF_EXIT message and starts waiting for that node to - * resetup the queue pair again. - */ -static __always_inline void -scif_exit(struct scif_dev *scifdev, struct scifmsg *unused) -{ - scifdev->exit_ack_pending = true; - if (scif_is_mgmt_node()) - scif_disconnect_node(scifdev->node, false); - else - scif_stop(scifdev); - schedule_delayed_work(&scifdev->qp_dwork, - msecs_to_jiffies(1000)); -} - -/** - * scif_exitack() - Respond to SCIF_EXIT_ACK interrupt message - * @scifdev: Remote SCIF device node - * @unused: Interrupt message (unused) - * - */ -static __always_inline void -scif_exit_ack(struct scif_dev *scifdev, struct scifmsg *unused) -{ - scifdev->exit = OP_COMPLETED; - wake_up(&scif_info.exitwq); -} - -/** - * scif_node_add() - Respond to SCIF_NODE_ADD interrupt message - * @scifdev: Remote SCIF device node - * @msg: Interrupt message - * - * When the mgmt node driver has finished initializing a MIC node queue pair it - * marks the node as online. It then looks for all currently online MIC cards - * and send a SCIF_NODE_ADD message to identify the ID of the new card for - * peer to peer initialization - * - * The local node allocates its incoming queue and sends its address in the - * SCIF_NODE_ADD_ACK message back to the mgmt node, the mgmt node "reflects" - * this message to the new node - */ -static __always_inline void -scif_node_add(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_dev *newdev; - dma_addr_t qp_offset; - int qp_connect; - struct scif_hw_dev *sdev; - - dev_dbg(&scifdev->sdev->dev, - "Scifdev %d:%d received NODE_ADD msg for node %d\n", - scifdev->node, msg->dst.node, msg->src.node); - dev_dbg(&scifdev->sdev->dev, - "Remote address for this node's aperture %llx\n", - msg->payload[0]); - newdev = &scif_dev[msg->src.node]; - newdev->node = msg->src.node; - newdev->sdev = scif_dev[SCIF_MGMT_NODE].sdev; - sdev = newdev->sdev; - - if (scif_setup_intr_wq(newdev)) { - dev_err(&scifdev->sdev->dev, - "failed to setup interrupts for %d\n", msg->src.node); - goto interrupt_setup_error; - } - newdev->mmio.va = ioremap(msg->payload[1], sdev->mmio->len); - if (!newdev->mmio.va) { - dev_err(&scifdev->sdev->dev, - "failed to map mmio for %d\n", msg->src.node); - goto mmio_map_error; - } - newdev->qpairs = kzalloc(sizeof(*newdev->qpairs), GFP_KERNEL); - if (!newdev->qpairs) - goto qp_alloc_error; - /* - * Set the base address of the remote node's memory since it gets - * added to qp_offset - */ - newdev->base_addr = msg->payload[0]; - - qp_connect = scif_setup_qp_connect(newdev->qpairs, &qp_offset, - SCIF_NODE_QP_SIZE, newdev); - if (qp_connect) { - dev_err(&scifdev->sdev->dev, - "failed to setup qp_connect %d\n", qp_connect); - goto qp_connect_error; - } - - newdev->db = sdev->hw_ops->next_db(sdev); - newdev->cookie = sdev->hw_ops->request_irq(sdev, scif_intr_handler, - "SCIF_INTR", newdev, - newdev->db); - if (IS_ERR(newdev->cookie)) - goto qp_connect_error; - newdev->qpairs->magic = SCIFEP_MAGIC; - newdev->qpairs->qp_state = SCIF_QP_OFFLINE; - - msg->uop = SCIF_NODE_ADD_ACK; - msg->dst.node = msg->src.node; - msg->src.node = scif_info.nodeid; - msg->payload[0] = qp_offset; - msg->payload[2] = newdev->db; - scif_nodeqp_send(&scif_dev[SCIF_MGMT_NODE], msg); - return; -qp_connect_error: - kfree(newdev->qpairs); - newdev->qpairs = NULL; -qp_alloc_error: - iounmap(newdev->mmio.va); - newdev->mmio.va = NULL; -mmio_map_error: -interrupt_setup_error: - dev_err(&scifdev->sdev->dev, - "node add failed for node %d\n", msg->src.node); - msg->uop = SCIF_NODE_ADD_NACK; - msg->dst.node = msg->src.node; - msg->src.node = scif_info.nodeid; - scif_nodeqp_send(&scif_dev[SCIF_MGMT_NODE], msg); -} - -void scif_poll_qp_state(struct work_struct *work) -{ -#define SCIF_NODE_QP_RETRY 100 -#define SCIF_NODE_QP_TIMEOUT 100 - struct scif_dev *peerdev = container_of(work, struct scif_dev, - p2p_dwork.work); - struct scif_qp *qp = &peerdev->qpairs[0]; - - if (qp->qp_state != SCIF_QP_ONLINE || - qp->remote_qp->qp_state != SCIF_QP_ONLINE) { - if (peerdev->p2p_retry++ == SCIF_NODE_QP_RETRY) { - dev_err(&peerdev->sdev->dev, - "Warning: QP check timeout with state %d\n", - qp->qp_state); - goto timeout; - } - schedule_delayed_work(&peerdev->p2p_dwork, - msecs_to_jiffies(SCIF_NODE_QP_TIMEOUT)); - return; - } - return; -timeout: - dev_err(&peerdev->sdev->dev, - "%s %d remote node %d offline, state = 0x%x\n", - __func__, __LINE__, peerdev->node, qp->qp_state); - qp->remote_qp->qp_state = SCIF_QP_OFFLINE; - scif_peer_unregister_device(peerdev); - scif_cleanup_scifdev(peerdev); -} - -/** - * scif_node_add_ack() - Respond to SCIF_NODE_ADD_ACK interrupt message - * @scifdev: Remote SCIF device node - * @msg: Interrupt message - * - * After a MIC node receives the SCIF_NODE_ADD_ACK message it send this - * message to the mgmt node to confirm the sequence is finished. - * - */ -static __always_inline void -scif_node_add_ack(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_dev *peerdev; - struct scif_qp *qp; - struct scif_dev *dst_dev = &scif_dev[msg->dst.node]; - - dev_dbg(&scifdev->sdev->dev, - "Scifdev %d received SCIF_NODE_ADD_ACK msg src %d dst %d\n", - scifdev->node, msg->src.node, msg->dst.node); - dev_dbg(&scifdev->sdev->dev, - "payload %llx %llx %llx %llx\n", msg->payload[0], - msg->payload[1], msg->payload[2], msg->payload[3]); - if (scif_is_mgmt_node()) { - /* - * the lock serializes with scif_qp_response_ack. The mgmt node - * is forwarding the NODE_ADD_ACK message from src to dst we - * need to make sure that the dst has already received a - * NODE_ADD for src and setup its end of the qp to dst - */ - mutex_lock(&scif_info.conflock); - msg->payload[1] = scif_info.maxid; - scif_nodeqp_send(dst_dev, msg); - mutex_unlock(&scif_info.conflock); - return; - } - peerdev = &scif_dev[msg->src.node]; - peerdev->sdev = scif_dev[SCIF_MGMT_NODE].sdev; - peerdev->node = msg->src.node; - - qp = &peerdev->qpairs[0]; - - if ((scif_setup_qp_connect_response(peerdev, &peerdev->qpairs[0], - msg->payload[0]))) - goto local_error; - peerdev->rdb = msg->payload[2]; - qp->remote_qp->qp_state = SCIF_QP_ONLINE; - - scif_peer_register_device(peerdev); - - schedule_delayed_work(&peerdev->p2p_dwork, 0); - return; -local_error: - scif_cleanup_scifdev(peerdev); -} - -/** - * scif_node_add_nack: Respond to SCIF_NODE_ADD_NACK interrupt message - * @scifdev: Remote SCIF device node - * @msg: Interrupt message - * - * SCIF_NODE_ADD failed, so inform the waiting wq. - */ -static __always_inline void -scif_node_add_nack(struct scif_dev *scifdev, struct scifmsg *msg) -{ - if (scif_is_mgmt_node()) { - struct scif_dev *dst_dev = &scif_dev[msg->dst.node]; - - dev_dbg(&scifdev->sdev->dev, - "SCIF_NODE_ADD_NACK received from %d\n", scifdev->node); - scif_nodeqp_send(dst_dev, msg); - } -} - -/** - * scif_node_remove: Handle SCIF_NODE_REMOVE message - * @scifdev: Remote SCIF device node - * @msg: Interrupt message - * - * Handle node removal. - */ -static __always_inline void -scif_node_remove(struct scif_dev *scifdev, struct scifmsg *msg) -{ - int node = msg->payload[0]; - struct scif_dev *scdev = &scif_dev[node]; - - scdev->node_remove_ack_pending = true; - scif_handle_remove_node(node); -} - -/** - * scif_node_remove_ack: Handle SCIF_NODE_REMOVE_ACK message - * @scifdev: Remote SCIF device node - * @msg: Interrupt message - * - * The peer has acked a SCIF_NODE_REMOVE message. - */ -static __always_inline void -scif_node_remove_ack(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_dev *sdev = &scif_dev[msg->payload[0]]; - - atomic_inc(&sdev->disconn_rescnt); - wake_up(&sdev->disconn_wq); -} - -/** - * scif_get_node_info: Respond to SCIF_GET_NODE_INFO interrupt message - * @scifdev: Remote SCIF device node - * @msg: Interrupt message - * - * Retrieve node info i.e maxid and total from the mgmt node. - */ -static __always_inline void -scif_get_node_info_resp(struct scif_dev *scifdev, struct scifmsg *msg) -{ - if (scif_is_mgmt_node()) { - swap(msg->dst.node, msg->src.node); - mutex_lock(&scif_info.conflock); - msg->payload[1] = scif_info.maxid; - msg->payload[2] = scif_info.total; - mutex_unlock(&scif_info.conflock); - scif_nodeqp_send(scifdev, msg); - } else { - struct completion *node_info = - (struct completion *)msg->payload[3]; - - mutex_lock(&scif_info.conflock); - scif_info.maxid = msg->payload[1]; - scif_info.total = msg->payload[2]; - complete_all(node_info); - mutex_unlock(&scif_info.conflock); - } -} - -static void -scif_msg_unknown(struct scif_dev *scifdev, struct scifmsg *msg) -{ - /* Bogus Node Qp Message? */ - dev_err(&scifdev->sdev->dev, - "Unknown message 0x%xn scifdev->node 0x%x\n", - msg->uop, scifdev->node); -} - -static void (*scif_intr_func[SCIF_MAX_MSG + 1]) - (struct scif_dev *, struct scifmsg *msg) = { - scif_msg_unknown, /* Error */ - scif_init, /* SCIF_INIT */ - scif_exit, /* SCIF_EXIT */ - scif_exit_ack, /* SCIF_EXIT_ACK */ - scif_node_add, /* SCIF_NODE_ADD */ - scif_node_add_ack, /* SCIF_NODE_ADD_ACK */ - scif_node_add_nack, /* SCIF_NODE_ADD_NACK */ - scif_node_remove, /* SCIF_NODE_REMOVE */ - scif_node_remove_ack, /* SCIF_NODE_REMOVE_ACK */ - scif_cnctreq, /* SCIF_CNCT_REQ */ - scif_cnctgnt, /* SCIF_CNCT_GNT */ - scif_cnctgnt_ack, /* SCIF_CNCT_GNTACK */ - scif_cnctgnt_nack, /* SCIF_CNCT_GNTNACK */ - scif_cnctrej, /* SCIF_CNCT_REJ */ - scif_discnct, /* SCIF_DISCNCT */ - scif_discnt_ack, /* SCIF_DISCNT_ACK */ - scif_clientsend, /* SCIF_CLIENT_SENT */ - scif_clientrcvd, /* SCIF_CLIENT_RCVD */ - scif_get_node_info_resp,/* SCIF_GET_NODE_INFO */ - scif_recv_reg, /* SCIF_REGISTER */ - scif_recv_reg_ack, /* SCIF_REGISTER_ACK */ - scif_recv_reg_nack, /* SCIF_REGISTER_NACK */ - scif_recv_unreg, /* SCIF_UNREGISTER */ - scif_recv_unreg_ack, /* SCIF_UNREGISTER_ACK */ - scif_recv_unreg_nack, /* SCIF_UNREGISTER_NACK */ - scif_alloc_req, /* SCIF_ALLOC_REQ */ - scif_alloc_gnt_rej, /* SCIF_ALLOC_GNT */ - scif_alloc_gnt_rej, /* SCIF_ALLOC_REJ */ - scif_free_virt, /* SCIF_FREE_VIRT */ - scif_recv_munmap, /* SCIF_MUNMAP */ - scif_recv_mark, /* SCIF_MARK */ - scif_recv_mark_resp, /* SCIF_MARK_ACK */ - scif_recv_mark_resp, /* SCIF_MARK_NACK */ - scif_recv_wait, /* SCIF_WAIT */ - scif_recv_wait_resp, /* SCIF_WAIT_ACK */ - scif_recv_wait_resp, /* SCIF_WAIT_NACK */ - scif_recv_sig_local, /* SCIF_SIG_LOCAL */ - scif_recv_sig_remote, /* SCIF_SIG_REMOTE */ - scif_recv_sig_resp, /* SCIF_SIG_ACK */ - scif_recv_sig_resp, /* SCIF_SIG_NACK */ -}; - -static int scif_max_msg_id = SCIF_MAX_MSG; -/** - * scif_nodeqp_msg_handler() - Common handler for node messages - * @scifdev: Remote device to respond to - * @qp: Remote memory pointer - * @msg: The message to be handled. - * - * This routine calls the appropriate routine to handle a Node Qp - * message receipt - */ -static void -scif_nodeqp_msg_handler(struct scif_dev *scifdev, - struct scif_qp *qp, struct scifmsg *msg) -{ - scif_display_message(scifdev, msg, "Rcvd"); - - if (msg->uop > (u32)scif_max_msg_id) { - /* Bogus Node Qp Message? */ - dev_err(&scifdev->sdev->dev, - "Unknown message 0x%xn scifdev->node 0x%x\n", - msg->uop, scifdev->node); - return; - } - - scif_intr_func[msg->uop](scifdev, msg); -} - -/** - * scif_nodeqp_intrhandler() - Interrupt handler for node messages - * @scifdev: Remote device to respond to - * @qp: Remote memory pointer - * - * This routine is triggered by the interrupt mechanism. It reads - * messages from the node queue RB and calls the Node QP Message handling - * routine. - */ -void scif_nodeqp_intrhandler(struct scif_dev *scifdev, struct scif_qp *qp) -{ - struct scifmsg msg; - int read_size; - - do { - read_size = scif_rb_get_next(&qp->inbound_q, &msg, sizeof(msg)); - if (!read_size) - break; - scif_nodeqp_msg_handler(scifdev, qp, &msg); - /* - * The node queue pair is unmapped so skip the read pointer - * update after receipt of a SCIF_EXIT_ACK - */ - if (SCIF_EXIT_ACK == msg.uop) - break; - scif_rb_update_read_ptr(&qp->inbound_q); - } while (1); -} - -/** - * scif_loopb_wq_handler - Loopback Workqueue Handler. - * @unused: loop back work (unused) - * - * This work queue routine is invoked by the loopback work queue handler. - * It grabs the recv lock, dequeues any available messages from the head - * of the loopback message list, calls the node QP message handler, - * waits for it to return, then frees up this message and dequeues more - * elements of the list if available. - */ -static void scif_loopb_wq_handler(struct work_struct *unused) -{ - struct scif_dev *scifdev = scif_info.loopb_dev; - struct scif_qp *qp = scifdev->qpairs; - struct scif_loopb_msg *msg; - - do { - msg = NULL; - spin_lock(&qp->recv_lock); - if (!list_empty(&scif_info.loopb_recv_q)) { - msg = list_first_entry(&scif_info.loopb_recv_q, - struct scif_loopb_msg, - list); - list_del(&msg->list); - } - spin_unlock(&qp->recv_lock); - - if (msg) { - scif_nodeqp_msg_handler(scifdev, qp, &msg->msg); - kfree(msg); - } - } while (msg); -} - -/** - * scif_loopb_msg_handler() - Workqueue handler for loopback messages. - * @scifdev: SCIF device - * @qp: Queue pair. - * - * This work queue routine is triggered when a loopback message is received. - * - * We need special handling for receiving Node Qp messages on a loopback SCIF - * device via two workqueues for receiving messages. - * - * The reason we need the extra workqueue which is not required with *normal* - * non-loopback SCIF devices is the potential classic deadlock described below: - * - * Thread A tries to send a message on a loopback SCIF device and blocks since - * there is no space in the RB while it has the send_lock held or another - * lock called lock X for example. - * - * Thread B: The Loopback Node QP message receive workqueue receives the message - * and tries to send a message (eg an ACK) to the loopback SCIF device. It tries - * to grab the send lock again or lock X and deadlocks with Thread A. The RB - * cannot be drained any further due to this classic deadlock. - * - * In order to avoid deadlocks as mentioned above we have an extra level of - * indirection achieved by having two workqueues. - * 1) The first workqueue whose handler is scif_loopb_msg_handler reads - * messages from the Node QP RB, adds them to a list and queues work for the - * second workqueue. - * - * 2) The second workqueue whose handler is scif_loopb_wq_handler dequeues - * messages from the list, handles them, frees up the memory and dequeues - * more elements from the list if possible. - */ -int -scif_loopb_msg_handler(struct scif_dev *scifdev, struct scif_qp *qp) -{ - int read_size; - struct scif_loopb_msg *msg; - - do { - msg = kmalloc(sizeof(*msg), GFP_KERNEL); - if (!msg) - return -ENOMEM; - read_size = scif_rb_get_next(&qp->inbound_q, &msg->msg, - sizeof(struct scifmsg)); - if (read_size != sizeof(struct scifmsg)) { - kfree(msg); - scif_rb_update_read_ptr(&qp->inbound_q); - break; - } - spin_lock(&qp->recv_lock); - list_add_tail(&msg->list, &scif_info.loopb_recv_q); - spin_unlock(&qp->recv_lock); - queue_work(scif_info.loopb_wq, &scif_info.loopb_work); - scif_rb_update_read_ptr(&qp->inbound_q); - } while (read_size == sizeof(struct scifmsg)); - return read_size; -} - -/** - * scif_setup_loopback_qp - One time setup work for Loopback Node Qp. - * @scifdev: SCIF device - * - * Sets up the required loopback workqueues, queue pairs and ring buffers - */ -int scif_setup_loopback_qp(struct scif_dev *scifdev) -{ - int err = 0; - void *local_q; - struct scif_qp *qp; - - err = scif_setup_intr_wq(scifdev); - if (err) - goto exit; - INIT_LIST_HEAD(&scif_info.loopb_recv_q); - snprintf(scif_info.loopb_wqname, sizeof(scif_info.loopb_wqname), - "SCIF LOOPB %d", scifdev->node); - scif_info.loopb_wq = - alloc_ordered_workqueue(scif_info.loopb_wqname, 0); - if (!scif_info.loopb_wq) { - err = -ENOMEM; - goto destroy_intr; - } - INIT_WORK(&scif_info.loopb_work, scif_loopb_wq_handler); - /* Allocate Self Qpair */ - scifdev->qpairs = kzalloc(sizeof(*scifdev->qpairs), GFP_KERNEL); - if (!scifdev->qpairs) { - err = -ENOMEM; - goto destroy_loopb_wq; - } - - qp = scifdev->qpairs; - qp->magic = SCIFEP_MAGIC; - spin_lock_init(&qp->send_lock); - spin_lock_init(&qp->recv_lock); - - local_q = kzalloc(SCIF_NODE_QP_SIZE, GFP_KERNEL); - if (!local_q) { - err = -ENOMEM; - goto free_qpairs; - } - /* - * For loopback the inbound_q and outbound_q are essentially the same - * since the Node sends a message on the loopback interface to the - * outbound_q which is then received on the inbound_q. - */ - scif_rb_init(&qp->outbound_q, - &qp->local_read, - &qp->local_write, - local_q, get_count_order(SCIF_NODE_QP_SIZE)); - - scif_rb_init(&qp->inbound_q, - &qp->local_read, - &qp->local_write, - local_q, get_count_order(SCIF_NODE_QP_SIZE)); - scif_info.nodeid = scifdev->node; - - scif_peer_register_device(scifdev); - - scif_info.loopb_dev = scifdev; - return err; -free_qpairs: - kfree(scifdev->qpairs); -destroy_loopb_wq: - destroy_workqueue(scif_info.loopb_wq); -destroy_intr: - scif_destroy_intr_wq(scifdev); -exit: - return err; -} - -/** - * scif_destroy_loopback_qp - One time uninit work for Loopback Node Qp - * @scifdev: SCIF device - * - * Destroys the workqueues and frees up the Ring Buffer and Queue Pair memory. - */ -int scif_destroy_loopback_qp(struct scif_dev *scifdev) -{ - scif_peer_unregister_device(scifdev); - destroy_workqueue(scif_info.loopb_wq); - scif_destroy_intr_wq(scifdev); - kfree(scifdev->qpairs->outbound_q.rb_base); - kfree(scifdev->qpairs); - scifdev->sdev = NULL; - scif_info.loopb_dev = NULL; - return 0; -} - -void scif_destroy_p2p(struct scif_dev *scifdev) -{ - struct scif_dev *peer_dev; - struct scif_p2p_info *p2p; - struct list_head *pos, *tmp; - int bd; - - mutex_lock(&scif_info.conflock); - /* Free P2P mappings in the given node for all its peer nodes */ - list_for_each_safe(pos, tmp, &scifdev->p2p) { - p2p = list_entry(pos, struct scif_p2p_info, ppi_list); - dma_unmap_sg(&scifdev->sdev->dev, p2p->ppi_sg[SCIF_PPI_MMIO], - p2p->sg_nentries[SCIF_PPI_MMIO], - DMA_BIDIRECTIONAL); - dma_unmap_sg(&scifdev->sdev->dev, p2p->ppi_sg[SCIF_PPI_APER], - p2p->sg_nentries[SCIF_PPI_APER], - DMA_BIDIRECTIONAL); - scif_p2p_freesg(p2p->ppi_sg[SCIF_PPI_MMIO]); - scif_p2p_freesg(p2p->ppi_sg[SCIF_PPI_APER]); - list_del(pos); - kfree(p2p); - } - - /* Free P2P mapping created in the peer nodes for the given node */ - for (bd = SCIF_MGMT_NODE + 1; bd <= scif_info.maxid; bd++) { - peer_dev = &scif_dev[bd]; - list_for_each_safe(pos, tmp, &peer_dev->p2p) { - p2p = list_entry(pos, struct scif_p2p_info, ppi_list); - if (p2p->ppi_peer_id == scifdev->node) { - dma_unmap_sg(&peer_dev->sdev->dev, - p2p->ppi_sg[SCIF_PPI_MMIO], - p2p->sg_nentries[SCIF_PPI_MMIO], - DMA_BIDIRECTIONAL); - dma_unmap_sg(&peer_dev->sdev->dev, - p2p->ppi_sg[SCIF_PPI_APER], - p2p->sg_nentries[SCIF_PPI_APER], - DMA_BIDIRECTIONAL); - scif_p2p_freesg(p2p->ppi_sg[SCIF_PPI_MMIO]); - scif_p2p_freesg(p2p->ppi_sg[SCIF_PPI_APER]); - list_del(pos); - kfree(p2p); - } - } - } - mutex_unlock(&scif_info.conflock); -} diff --git a/drivers/misc/mic/scif/scif_nodeqp.h b/drivers/misc/mic/scif/scif_nodeqp.h deleted file mode 100644 index 95896273138e..000000000000 --- a/drivers/misc/mic/scif/scif_nodeqp.h +++ /dev/null @@ -1,221 +0,0 @@ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2014 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * BSD LICENSE - * - * Copyright(c) 2014 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Intel SCIF driver. - * - */ -#ifndef SCIF_NODEQP -#define SCIF_NODEQP - -#include "scif_rb.h" -#include "scif_peer_bus.h" - -#define SCIF_INIT 1 /* First message sent to the peer node for discovery */ -#define SCIF_EXIT 2 /* Last message from the peer informing intent to exit */ -#define SCIF_EXIT_ACK 3 /* Response to SCIF_EXIT message */ -#define SCIF_NODE_ADD 4 /* Tell Online nodes a new node exits */ -#define SCIF_NODE_ADD_ACK 5 /* Confirm to mgmt node sequence is finished */ -#define SCIF_NODE_ADD_NACK 6 /* SCIF_NODE_ADD failed */ -#define SCIF_NODE_REMOVE 7 /* Request to deactivate a SCIF node */ -#define SCIF_NODE_REMOVE_ACK 8 /* Response to a SCIF_NODE_REMOVE message */ -#define SCIF_CNCT_REQ 9 /* Phys addr of Request connection to a port */ -#define SCIF_CNCT_GNT 10 /* Phys addr of new Grant connection request */ -#define SCIF_CNCT_GNTACK 11 /* Error type Reject a connection request */ -#define SCIF_CNCT_GNTNACK 12 /* Error type Reject a connection request */ -#define SCIF_CNCT_REJ 13 /* Error type Reject a connection request */ -#define SCIF_DISCNCT 14 /* Notify peer that connection is being terminated */ -#define SCIF_DISCNT_ACK 15 /* Notify peer that connection is being terminated */ -#define SCIF_CLIENT_SENT 16 /* Notify the peer that data has been written */ -#define SCIF_CLIENT_RCVD 17 /* Notify the peer that data has been read */ -#define SCIF_GET_NODE_INFO 18 /* Get current node mask from the mgmt node*/ -#define SCIF_REGISTER 19 /* Tell peer about a new registered window */ -#define SCIF_REGISTER_ACK 20 /* Notify peer about unregistration success */ -#define SCIF_REGISTER_NACK 21 /* Notify peer about registration success */ -#define SCIF_UNREGISTER 22 /* Tell peer about unregistering a window */ -#define SCIF_UNREGISTER_ACK 23 /* Notify peer about registration failure */ -#define SCIF_UNREGISTER_NACK 24 /* Notify peer about unregistration failure */ -#define SCIF_ALLOC_REQ 25 /* Request a mapped buffer */ -#define SCIF_ALLOC_GNT 26 /* Notify peer about allocation success */ -#define SCIF_ALLOC_REJ 27 /* Notify peer about allocation failure */ -#define SCIF_FREE_VIRT 28 /* Free previously allocated virtual memory */ -#define SCIF_MUNMAP 29 /* Acknowledgment for a SCIF_MMAP request */ -#define SCIF_MARK 30 /* SCIF Remote Fence Mark Request */ -#define SCIF_MARK_ACK 31 /* SCIF Remote Fence Mark Success */ -#define SCIF_MARK_NACK 32 /* SCIF Remote Fence Mark Failure */ -#define SCIF_WAIT 33 /* SCIF Remote Fence Wait Request */ -#define SCIF_WAIT_ACK 34 /* SCIF Remote Fence Wait Success */ -#define SCIF_WAIT_NACK 35 /* SCIF Remote Fence Wait Failure */ -#define SCIF_SIG_LOCAL 36 /* SCIF Remote Fence Local Signal Request */ -#define SCIF_SIG_REMOTE 37 /* SCIF Remote Fence Remote Signal Request */ -#define SCIF_SIG_ACK 38 /* SCIF Remote Fence Remote Signal Success */ -#define SCIF_SIG_NACK 39 /* SCIF Remote Fence Remote Signal Failure */ -#define SCIF_MAX_MSG SCIF_SIG_NACK - -/* - * struct scifmsg - Node QP message format - * - * @src: Source information - * @dst: Destination information - * @uop: The message opcode - * @payload: Unique payload format for each message - */ -struct scifmsg { - struct scif_port_id src; - struct scif_port_id dst; - u32 uop; - u64 payload[4]; -} __packed; - -/* - * struct scif_allocmsg - Used with SCIF_ALLOC_REQ to request - * the remote note to allocate memory - * - * phys_addr: Physical address of the buffer - * vaddr: Virtual address of the buffer - * size: Size of the buffer - * state: Current state - * allocwq: wait queue for status - */ -struct scif_allocmsg { - dma_addr_t phys_addr; - unsigned long vaddr; - size_t size; - enum scif_msg_state state; - wait_queue_head_t allocwq; -}; - -/* - * struct scif_qp - Node Queue Pair - * - * Interesting structure -- a little difficult because we can only - * write across the PCIe, so any r/w pointer we need to read is - * local. We only need to read the read pointer on the inbound_q - * and read the write pointer in the outbound_q - * - * @magic: Magic value to ensure the peer sees the QP correctly - * @outbound_q: The outbound ring buffer for sending messages - * @inbound_q: The inbound ring buffer for receiving messages - * @local_write: Local write index - * @local_read: Local read index - * @remote_qp: The remote queue pair - * @local_buf: DMA address of local ring buffer - * @local_qp: DMA address of the local queue pair data structure - * @remote_buf: DMA address of remote ring buffer - * @qp_state: QP state i.e. online or offline used for P2P - * @send_lock: synchronize access to outbound queue - * @recv_lock: Synchronize access to inbound queue - */ -struct scif_qp { - u64 magic; -#define SCIFEP_MAGIC 0x5c1f000000005c1fULL - struct scif_rb outbound_q; - struct scif_rb inbound_q; - - u32 local_write __aligned(64); - u32 local_read __aligned(64); - struct scif_qp *remote_qp; - dma_addr_t local_buf; - dma_addr_t local_qp; - dma_addr_t remote_buf; - u32 qp_state; -#define SCIF_QP_OFFLINE 0xdead -#define SCIF_QP_ONLINE 0xc0de - spinlock_t send_lock; - spinlock_t recv_lock; -}; - -/* - * struct scif_loopb_msg - An element in the loopback Node QP message list. - * - * @msg - The SCIF node QP message - * @list - link in the list of messages - */ -struct scif_loopb_msg { - struct scifmsg msg; - struct list_head list; -}; - -int scif_nodeqp_send(struct scif_dev *scifdev, struct scifmsg *msg); -int _scif_nodeqp_send(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_nodeqp_intrhandler(struct scif_dev *scifdev, struct scif_qp *qp); -int scif_loopb_msg_handler(struct scif_dev *scifdev, struct scif_qp *qp); -int scif_setup_qp(struct scif_dev *scifdev); -int scif_qp_response(phys_addr_t phys, struct scif_dev *dev); -int scif_setup_qp_connect(struct scif_qp *qp, dma_addr_t *qp_offset, - int local_size, struct scif_dev *scifdev); -int scif_setup_qp_accept(struct scif_qp *qp, dma_addr_t *qp_offset, - dma_addr_t phys, int local_size, - struct scif_dev *scifdev); -int scif_setup_qp_connect_response(struct scif_dev *scifdev, - struct scif_qp *qp, u64 payload); -int scif_setup_loopback_qp(struct scif_dev *scifdev); -int scif_destroy_loopback_qp(struct scif_dev *scifdev); -void scif_poll_qp_state(struct work_struct *work); -void scif_destroy_p2p(struct scif_dev *scifdev); -void scif_send_exit(struct scif_dev *scifdev); -static inline struct device *scif_get_peer_dev(struct scif_dev *scifdev) -{ - struct scif_peer_dev *spdev; - struct device *spdev_ret; - - rcu_read_lock(); - spdev = rcu_dereference(scifdev->spdev); - if (spdev) - spdev_ret = get_device(&spdev->dev); - else - spdev_ret = ERR_PTR(-ENODEV); - rcu_read_unlock(); - return spdev_ret; -} - -static inline void scif_put_peer_dev(struct device *dev) -{ - put_device(dev); -} -#endif /* SCIF_NODEQP */ diff --git a/drivers/misc/mic/scif/scif_peer_bus.c b/drivers/misc/mic/scif/scif_peer_bus.c deleted file mode 100644 index 6d608308bb60..000000000000 --- a/drivers/misc/mic/scif/scif_peer_bus.c +++ /dev/null @@ -1,175 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel SCIF driver. - */ -#include "scif_main.h" -#include "../bus/scif_bus.h" -#include "scif_peer_bus.h" - -static inline struct scif_peer_dev * -dev_to_scif_peer(struct device *dev) -{ - return container_of(dev, struct scif_peer_dev, dev); -} - -struct bus_type scif_peer_bus = { - .name = "scif_peer_bus", -}; - -static void scif_peer_release_dev(struct device *d) -{ - struct scif_peer_dev *sdev = dev_to_scif_peer(d); - struct scif_dev *scifdev = &scif_dev[sdev->dnode]; - - scif_cleanup_scifdev(scifdev); - kfree(sdev); -} - -static int scif_peer_initialize_device(struct scif_dev *scifdev) -{ - struct scif_peer_dev *spdev; - int ret; - - spdev = kzalloc(sizeof(*spdev), GFP_KERNEL); - if (!spdev) { - ret = -ENOMEM; - goto err; - } - - spdev->dev.parent = scifdev->sdev->dev.parent; - spdev->dev.release = scif_peer_release_dev; - spdev->dnode = scifdev->node; - spdev->dev.bus = &scif_peer_bus; - dev_set_name(&spdev->dev, "scif_peer-dev%u", spdev->dnode); - - device_initialize(&spdev->dev); - get_device(&spdev->dev); - rcu_assign_pointer(scifdev->spdev, spdev); - - mutex_lock(&scif_info.conflock); - scif_info.total++; - scif_info.maxid = max_t(u32, spdev->dnode, scif_info.maxid); - mutex_unlock(&scif_info.conflock); - return 0; -err: - dev_err(&scifdev->sdev->dev, - "dnode %d: initialize_device rc %d\n", scifdev->node, ret); - return ret; -} - -static int scif_peer_add_device(struct scif_dev *scifdev) -{ - struct scif_peer_dev *spdev = rcu_dereference(scifdev->spdev); - char pool_name[16]; - int ret; - - ret = device_add(&spdev->dev); - put_device(&spdev->dev); - if (ret) { - dev_err(&scifdev->sdev->dev, - "dnode %d: peer device_add failed\n", scifdev->node); - goto put_spdev; - } - - scnprintf(pool_name, sizeof(pool_name), "scif-%d", spdev->dnode); - scifdev->signal_pool = dmam_pool_create(pool_name, &scifdev->sdev->dev, - sizeof(struct scif_status), 1, - 0); - if (!scifdev->signal_pool) { - dev_err(&scifdev->sdev->dev, - "dnode %d: dmam_pool_create failed\n", scifdev->node); - ret = -ENOMEM; - goto del_spdev; - } - dev_dbg(&spdev->dev, "Added peer dnode %d\n", spdev->dnode); - return 0; -del_spdev: - device_del(&spdev->dev); -put_spdev: - RCU_INIT_POINTER(scifdev->spdev, NULL); - synchronize_rcu(); - put_device(&spdev->dev); - - mutex_lock(&scif_info.conflock); - scif_info.total--; - mutex_unlock(&scif_info.conflock); - return ret; -} - -void scif_add_peer_device(struct work_struct *work) -{ - struct scif_dev *scifdev = container_of(work, struct scif_dev, - peer_add_work); - - scif_peer_add_device(scifdev); -} - -/* - * Peer device registration is split into a device_initialize and a device_add. - * The reason for doing this is as follows: First, peer device registration - * itself cannot be done in the message processing thread and must be delegated - * to another workqueue, otherwise if SCIF client probe, called during peer - * device registration, calls scif_connect(..), it will block the message - * processing thread causing a deadlock. Next, device_initialize is done in the - * "top-half" message processing thread and device_add in the "bottom-half" - * workqueue. If this is not done, SCIF_CNCT_REQ message processing executing - * concurrently with SCIF_INIT message processing is unable to get a reference - * on the peer device, thereby failing the connect request. - */ -void scif_peer_register_device(struct scif_dev *scifdev) -{ - int ret; - - mutex_lock(&scifdev->lock); - ret = scif_peer_initialize_device(scifdev); - if (ret) - goto exit; - schedule_work(&scifdev->peer_add_work); -exit: - mutex_unlock(&scifdev->lock); -} - -int scif_peer_unregister_device(struct scif_dev *scifdev) -{ - struct scif_peer_dev *spdev; - - mutex_lock(&scifdev->lock); - /* Flush work to ensure device register is complete */ - flush_work(&scifdev->peer_add_work); - - /* - * Continue holding scifdev->lock since theoretically unregister_device - * can be called simultaneously from multiple threads - */ - spdev = rcu_dereference(scifdev->spdev); - if (!spdev) { - mutex_unlock(&scifdev->lock); - return -ENODEV; - } - - RCU_INIT_POINTER(scifdev->spdev, NULL); - synchronize_rcu(); - mutex_unlock(&scifdev->lock); - - dev_dbg(&spdev->dev, "Removing peer dnode %d\n", spdev->dnode); - device_unregister(&spdev->dev); - - mutex_lock(&scif_info.conflock); - scif_info.total--; - mutex_unlock(&scif_info.conflock); - return 0; -} - -int scif_peer_bus_init(void) -{ - return bus_register(&scif_peer_bus); -} - -void scif_peer_bus_exit(void) -{ - bus_unregister(&scif_peer_bus); -} diff --git a/drivers/misc/mic/scif/scif_peer_bus.h b/drivers/misc/mic/scif/scif_peer_bus.h deleted file mode 100644 index 2ea4c51c18c1..000000000000 --- a/drivers/misc/mic/scif/scif_peer_bus.h +++ /dev/null @@ -1,23 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel SCIF driver. - */ -#ifndef _SCIF_PEER_BUS_H_ -#define _SCIF_PEER_BUS_H_ - -#include <linux/device.h> -#include <linux/mic_common.h> -#include <linux/scif.h> - -struct scif_dev; - -void scif_add_peer_device(struct work_struct *work); -void scif_peer_register_device(struct scif_dev *sdev); -int scif_peer_unregister_device(struct scif_dev *scifdev); -int scif_peer_bus_init(void); -void scif_peer_bus_exit(void); -#endif /* _SCIF_PEER_BUS_H */ diff --git a/drivers/misc/mic/scif/scif_ports.c b/drivers/misc/mic/scif/scif_ports.c deleted file mode 100644 index 4bdb5ef9a139..000000000000 --- a/drivers/misc/mic/scif/scif_ports.c +++ /dev/null @@ -1,116 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel SCIF driver. - */ -#include <linux/idr.h> - -#include "scif_main.h" - -#define SCIF_PORT_COUNT 0x10000 /* Ports available */ - -struct idr scif_ports; - -/** - * struct scif_port - SCIF port information - * - * @ref_cnt: Reference count since there can be multiple endpoints - * created via scif_accept(..) simultaneously using a port. - */ -struct scif_port { - int ref_cnt; -}; - -/** - * __scif_get_port - Reserve a specified port # for SCIF and add it - * to the global list. - * @start: lowest port # to be reserved (inclusive). - * @end: highest port # to be reserved (exclusive). - * - * @return : Allocated SCIF port #, or -ENOSPC if port unavailable. - * On memory allocation failure, returns -ENOMEM. - */ -static int __scif_get_port(int start, int end) -{ - int id; - struct scif_port *port = kzalloc(sizeof(*port), GFP_ATOMIC); - - if (!port) - return -ENOMEM; - spin_lock(&scif_info.port_lock); - id = idr_alloc(&scif_ports, port, start, end, GFP_ATOMIC); - if (id >= 0) - port->ref_cnt++; - spin_unlock(&scif_info.port_lock); - return id; -} - -/** - * scif_rsrv_port - Reserve a specified port # for SCIF. - * @port : port # to be reserved. - * - * @return : Allocated SCIF port #, or -ENOSPC if port unavailable. - * On memory allocation failure, returns -ENOMEM. - */ -int scif_rsrv_port(u16 port) -{ - return __scif_get_port(port, port + 1); -} - -/** - * scif_get_new_port - Get and reserve any port # for SCIF in the range - * SCIF_PORT_RSVD + 1 to SCIF_PORT_COUNT - 1. - * - * @return : Allocated SCIF port #, or -ENOSPC if no ports available. - * On memory allocation failure, returns -ENOMEM. - */ -int scif_get_new_port(void) -{ - return __scif_get_port(SCIF_PORT_RSVD + 1, SCIF_PORT_COUNT); -} - -/** - * scif_get_port - Increment the reference count for a SCIF port - * @id : SCIF port - * - * @return : None - */ -void scif_get_port(u16 id) -{ - struct scif_port *port; - - if (!id) - return; - spin_lock(&scif_info.port_lock); - port = idr_find(&scif_ports, id); - if (port) - port->ref_cnt++; - spin_unlock(&scif_info.port_lock); -} - -/** - * scif_put_port - Release a reserved SCIF port - * @id : SCIF port to be released. - * - * @return : None - */ -void scif_put_port(u16 id) -{ - struct scif_port *port; - - if (!id) - return; - spin_lock(&scif_info.port_lock); - port = idr_find(&scif_ports, id); - if (port) { - port->ref_cnt--; - if (!port->ref_cnt) { - idr_remove(&scif_ports, id); - kfree(port); - } - } - spin_unlock(&scif_info.port_lock); -} diff --git a/drivers/misc/mic/scif/scif_rb.c b/drivers/misc/mic/scif/scif_rb.c deleted file mode 100644 index e425882ae06d..000000000000 --- a/drivers/misc/mic/scif/scif_rb.c +++ /dev/null @@ -1,240 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel SCIF driver. - */ -#include <linux/circ_buf.h> -#include <linux/types.h> -#include <linux/io.h> -#include <linux/errno.h> - -#include "scif_rb.h" - -#define scif_rb_ring_cnt(head, tail, size) CIRC_CNT(head, tail, size) -#define scif_rb_ring_space(head, tail, size) CIRC_SPACE(head, tail, size) - -/** - * scif_rb_init - Initializes the ring buffer - * @rb: ring buffer - * @read_ptr: A pointer to the read offset - * @write_ptr: A pointer to the write offset - * @rb_base: A pointer to the base of the ring buffer - * @size: The size of the ring buffer in powers of two - */ -void scif_rb_init(struct scif_rb *rb, u32 *read_ptr, u32 *write_ptr, - void *rb_base, u8 size) -{ - rb->rb_base = rb_base; - rb->size = (1 << size); - rb->read_ptr = read_ptr; - rb->write_ptr = write_ptr; - rb->current_read_offset = *read_ptr; - rb->current_write_offset = *write_ptr; -} - -/* Copies a message to the ring buffer -- handles the wrap around case */ -static void memcpy_torb(struct scif_rb *rb, void *header, - void *msg, u32 size) -{ - u32 size1, size2; - - if (header + size >= rb->rb_base + rb->size) { - /* Need to call two copies if it wraps around */ - size1 = (u32)(rb->rb_base + rb->size - header); - size2 = size - size1; - memcpy_toio((void __iomem __force *)header, msg, size1); - memcpy_toio((void __iomem __force *)rb->rb_base, - msg + size1, size2); - } else { - memcpy_toio((void __iomem __force *)header, msg, size); - } -} - -/* Copies a message from the ring buffer -- handles the wrap around case */ -static void memcpy_fromrb(struct scif_rb *rb, void *header, - void *msg, u32 size) -{ - u32 size1, size2; - - if (header + size >= rb->rb_base + rb->size) { - /* Need to call two copies if it wraps around */ - size1 = (u32)(rb->rb_base + rb->size - header); - size2 = size - size1; - memcpy_fromio(msg, (void __iomem __force *)header, size1); - memcpy_fromio(msg + size1, - (void __iomem __force *)rb->rb_base, size2); - } else { - memcpy_fromio(msg, (void __iomem __force *)header, size); - } -} - -/** - * scif_rb_space - Query space available for writing to the RB - * @rb: ring buffer - * - * Return: size available for writing to RB in bytes. - */ -u32 scif_rb_space(struct scif_rb *rb) -{ - rb->current_read_offset = *rb->read_ptr; - /* - * Update from the HW read pointer only once the peer has exposed the - * new empty slot. This barrier is paired with the memory barrier - * scif_rb_update_read_ptr() - */ - mb(); - return scif_rb_ring_space(rb->current_write_offset, - rb->current_read_offset, rb->size); -} - -/** - * scif_rb_write - Write a message to the RB - * @rb: ring buffer - * @msg: buffer to send the message. Must be at least size bytes long - * @size: the size (in bytes) to be copied to the RB - * - * This API does not block if there isn't enough space in the RB. - * Returns: 0 on success or -ENOMEM on failure - */ -int scif_rb_write(struct scif_rb *rb, void *msg, u32 size) -{ - void *header; - - if (scif_rb_space(rb) < size) - return -ENOMEM; - header = rb->rb_base + rb->current_write_offset; - memcpy_torb(rb, header, msg, size); - /* - * Wait until scif_rb_commit(). Update the local ring - * buffer data, not the shared data until commit. - */ - rb->current_write_offset = - (rb->current_write_offset + size) & (rb->size - 1); - return 0; -} - -/** - * scif_rb_commit - To submit the message to let the peer fetch it - * @rb: ring buffer - */ -void scif_rb_commit(struct scif_rb *rb) -{ - /* - * We must ensure ordering between the all the data committed - * previously before we expose the new message to the peer by - * updating the write_ptr. This write barrier is paired with - * the read barrier in scif_rb_count(..) - */ - wmb(); - WRITE_ONCE(*rb->write_ptr, rb->current_write_offset); -#ifdef CONFIG_INTEL_MIC_CARD - /* - * X100 Si bug: For the case where a Core is performing an EXT_WR - * followed by a Doorbell Write, the Core must perform two EXT_WR to the - * same address with the same data before it does the Doorbell Write. - * This way, if ordering is violated for the Interrupt Message, it will - * fall just behind the first Posted associated with the first EXT_WR. - */ - WRITE_ONCE(*rb->write_ptr, rb->current_write_offset); -#endif -} - -/** - * scif_rb_get - To get next message from the ring buffer - * @rb: ring buffer - * @size: Number of bytes to be read - * - * Return: NULL if no bytes to be read from the ring buffer, otherwise the - * pointer to the next byte - */ -static void *scif_rb_get(struct scif_rb *rb, u32 size) -{ - void *header = NULL; - - if (scif_rb_count(rb, size) >= size) - header = rb->rb_base + rb->current_read_offset; - return header; -} - -/* - * scif_rb_get_next - Read from ring buffer. - * @rb: ring buffer - * @msg: buffer to hold the message. Must be at least size bytes long - * @size: Number of bytes to be read - * - * Return: number of bytes read if available bytes are >= size, otherwise - * returns zero. - */ -u32 scif_rb_get_next(struct scif_rb *rb, void *msg, u32 size) -{ - void *header = NULL; - int read_size = 0; - - header = scif_rb_get(rb, size); - if (header) { - u32 next_cmd_offset = - (rb->current_read_offset + size) & (rb->size - 1); - - read_size = size; - rb->current_read_offset = next_cmd_offset; - memcpy_fromrb(rb, header, msg, size); - } - return read_size; -} - -/** - * scif_rb_update_read_ptr - * @rb: ring buffer - */ -void scif_rb_update_read_ptr(struct scif_rb *rb) -{ - u32 new_offset; - - new_offset = rb->current_read_offset; - /* - * We must ensure ordering between the all the data committed or read - * previously before we expose the empty slot to the peer by updating - * the read_ptr. This barrier is paired with the memory barrier in - * scif_rb_space(..) - */ - mb(); - WRITE_ONCE(*rb->read_ptr, new_offset); -#ifdef CONFIG_INTEL_MIC_CARD - /* - * X100 Si Bug: For the case where a Core is performing an EXT_WR - * followed by a Doorbell Write, the Core must perform two EXT_WR to the - * same address with the same data before it does the Doorbell Write. - * This way, if ordering is violated for the Interrupt Message, it will - * fall just behind the first Posted associated with the first EXT_WR. - */ - WRITE_ONCE(*rb->read_ptr, new_offset); -#endif -} - -/** - * scif_rb_count - * @rb: ring buffer - * @size: Number of bytes expected to be read - * - * Return: number of bytes that can be read from the RB - */ -u32 scif_rb_count(struct scif_rb *rb, u32 size) -{ - if (scif_rb_ring_cnt(rb->current_write_offset, - rb->current_read_offset, - rb->size) < size) { - rb->current_write_offset = *rb->write_ptr; - /* - * Update from the HW write pointer if empty only once the peer - * has exposed the new message. This read barrier is paired - * with the write barrier in scif_rb_commit(..) - */ - smp_rmb(); - } - return scif_rb_ring_cnt(rb->current_write_offset, - rb->current_read_offset, - rb->size); -} diff --git a/drivers/misc/mic/scif/scif_rb.h b/drivers/misc/mic/scif/scif_rb.h deleted file mode 100644 index 166dffe3093d..000000000000 --- a/drivers/misc/mic/scif/scif_rb.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2014 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * BSD LICENSE - * - * Copyright(c) 2014 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Intel SCIF driver. - */ -#ifndef SCIF_RB_H -#define SCIF_RB_H -/* - * This file describes a general purpose, byte based ring buffer. Writers to the - * ring buffer need to synchronize using a lock. The same is true for readers, - * although in practice, the ring buffer has a single reader. It is lockless - * between producer and consumer so it can handle being used across the PCIe - * bus. The ring buffer ensures that there are no reads across the PCIe bus for - * performance reasons. Two of these are used to form a single bidirectional - * queue-pair across PCIe. - */ -/* - * struct scif_rb - SCIF Ring Buffer - * - * @rb_base: The base of the memory used for storing RB messages - * @read_ptr: Pointer to the read offset - * @write_ptr: Pointer to the write offset - * @size: Size of the memory in rb_base - * @current_read_offset: Cached read offset for performance - * @current_write_offset: Cached write offset for performance - */ -struct scif_rb { - void *rb_base; - u32 *read_ptr; - u32 *write_ptr; - u32 size; - u32 current_read_offset; - u32 current_write_offset; -}; - -/* methods used by both */ -void scif_rb_init(struct scif_rb *rb, u32 *read_ptr, u32 *write_ptr, - void *rb_base, u8 size); -/* writer only methods */ -/* write a new command, then scif_rb_commit() */ -int scif_rb_write(struct scif_rb *rb, void *msg, u32 size); -/* after write(), then scif_rb_commit() */ -void scif_rb_commit(struct scif_rb *rb); -/* query space available for writing to a RB. */ -u32 scif_rb_space(struct scif_rb *rb); - -/* reader only methods */ -/* read a new message from the ring buffer of size bytes */ -u32 scif_rb_get_next(struct scif_rb *rb, void *msg, u32 size); -/* update the read pointer so that the space can be reused */ -void scif_rb_update_read_ptr(struct scif_rb *rb); -/* count the number of bytes that can be read */ -u32 scif_rb_count(struct scif_rb *rb, u32 size); -#endif diff --git a/drivers/misc/mic/scif/scif_rma.c b/drivers/misc/mic/scif/scif_rma.c deleted file mode 100644 index 18fb9d8b8a4b..000000000000 --- a/drivers/misc/mic/scif/scif_rma.c +++ /dev/null @@ -1,1760 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2015 Intel Corporation. - * - * Intel SCIF driver. - */ -#include <linux/intel-iommu.h> -#include <linux/pagemap.h> -#include <linux/sched/mm.h> -#include <linux/sched/signal.h> - -#include "scif_main.h" -#include "scif_map.h" - -/* Used to skip ulimit checks for registrations with SCIF_MAP_KERNEL flag */ -#define SCIF_MAP_ULIMIT 0x40 - -bool scif_ulimit_check = 1; - -/** - * scif_rma_ep_init: - * @ep: end point - * - * Initialize RMA per EP data structures. - */ -void scif_rma_ep_init(struct scif_endpt *ep) -{ - struct scif_endpt_rma_info *rma = &ep->rma_info; - - mutex_init(&rma->rma_lock); - init_iova_domain(&rma->iovad, PAGE_SIZE, SCIF_IOVA_START_PFN); - spin_lock_init(&rma->tc_lock); - mutex_init(&rma->mmn_lock); - INIT_LIST_HEAD(&rma->reg_list); - INIT_LIST_HEAD(&rma->remote_reg_list); - atomic_set(&rma->tw_refcount, 0); - atomic_set(&rma->tcw_refcount, 0); - atomic_set(&rma->tcw_total_pages, 0); - atomic_set(&rma->fence_refcount, 0); - - rma->async_list_del = 0; - rma->dma_chan = NULL; - INIT_LIST_HEAD(&rma->mmn_list); - INIT_LIST_HEAD(&rma->vma_list); - init_waitqueue_head(&rma->markwq); -} - -/** - * scif_rma_ep_can_uninit: - * @ep: end point - * - * Returns 1 if an endpoint can be uninitialized and 0 otherwise. - */ -int scif_rma_ep_can_uninit(struct scif_endpt *ep) -{ - int ret = 0; - - mutex_lock(&ep->rma_info.rma_lock); - /* Destroy RMA Info only if both lists are empty */ - if (list_empty(&ep->rma_info.reg_list) && - list_empty(&ep->rma_info.remote_reg_list) && - list_empty(&ep->rma_info.mmn_list) && - !atomic_read(&ep->rma_info.tw_refcount) && - !atomic_read(&ep->rma_info.tcw_refcount) && - !atomic_read(&ep->rma_info.fence_refcount)) - ret = 1; - mutex_unlock(&ep->rma_info.rma_lock); - return ret; -} - -/** - * scif_create_pinned_pages: - * @nr_pages: number of pages in window - * @prot: read/write protection - * - * Allocate and prepare a set of pinned pages. - */ -static struct scif_pinned_pages * -scif_create_pinned_pages(int nr_pages, int prot) -{ - struct scif_pinned_pages *pin; - - might_sleep(); - pin = scif_zalloc(sizeof(*pin)); - if (!pin) - goto error; - - pin->pages = scif_zalloc(nr_pages * sizeof(*pin->pages)); - if (!pin->pages) - goto error_free_pinned_pages; - - pin->prot = prot; - pin->magic = SCIFEP_MAGIC; - return pin; - -error_free_pinned_pages: - scif_free(pin, sizeof(*pin)); -error: - return NULL; -} - -/** - * scif_destroy_pinned_pages: - * @pin: A set of pinned pages. - * - * Deallocate resources for pinned pages. - */ -static int scif_destroy_pinned_pages(struct scif_pinned_pages *pin) -{ - int j; - int writeable = pin->prot & SCIF_PROT_WRITE; - int kernel = SCIF_MAP_KERNEL & pin->map_flags; - - if (kernel) { - for (j = 0; j < pin->nr_pages; j++) { - if (pin->pages[j] && !kernel) { - if (writeable) - set_page_dirty_lock(pin->pages[j]); - put_page(pin->pages[j]); - } - } - } else - unpin_user_pages_dirty_lock(pin->pages, pin->nr_pages, - writeable); - scif_free(pin->pages, - pin->nr_pages * sizeof(*pin->pages)); - scif_free(pin, sizeof(*pin)); - return 0; -} - -/* - * scif_create_window: - * @ep: end point - * @nr_pages: number of pages - * @offset: registration offset - * @temp: true if a temporary window is being created - * - * Allocate and prepare a self registration window. - */ -struct scif_window *scif_create_window(struct scif_endpt *ep, int nr_pages, - s64 offset, bool temp) -{ - struct scif_window *window; - - might_sleep(); - window = scif_zalloc(sizeof(*window)); - if (!window) - goto error; - - window->dma_addr = scif_zalloc(nr_pages * sizeof(*window->dma_addr)); - if (!window->dma_addr) - goto error_free_window; - - window->num_pages = scif_zalloc(nr_pages * sizeof(*window->num_pages)); - if (!window->num_pages) - goto error_free_window; - - window->offset = offset; - window->ep = (u64)ep; - window->magic = SCIFEP_MAGIC; - window->reg_state = OP_IDLE; - init_waitqueue_head(&window->regwq); - window->unreg_state = OP_IDLE; - init_waitqueue_head(&window->unregwq); - INIT_LIST_HEAD(&window->list); - window->type = SCIF_WINDOW_SELF; - window->temp = temp; - return window; - -error_free_window: - scif_free(window->dma_addr, - nr_pages * sizeof(*window->dma_addr)); - scif_free(window, sizeof(*window)); -error: - return NULL; -} - -/** - * scif_destroy_incomplete_window: - * @ep: end point - * @window: registration window - * - * Deallocate resources for self window. - */ -static void scif_destroy_incomplete_window(struct scif_endpt *ep, - struct scif_window *window) -{ - int err; - int nr_pages = window->nr_pages; - struct scif_allocmsg *alloc = &window->alloc_handle; - struct scifmsg msg; - -retry: - /* Wait for a SCIF_ALLOC_GNT/REJ message */ - err = wait_event_timeout(alloc->allocwq, - alloc->state != OP_IN_PROGRESS, - SCIF_NODE_ALIVE_TIMEOUT); - if (!err && scifdev_alive(ep)) - goto retry; - - mutex_lock(&ep->rma_info.rma_lock); - if (alloc->state == OP_COMPLETED) { - msg.uop = SCIF_FREE_VIRT; - msg.src = ep->port; - msg.payload[0] = ep->remote_ep; - msg.payload[1] = window->alloc_handle.vaddr; - msg.payload[2] = (u64)window; - msg.payload[3] = SCIF_REGISTER; - _scif_nodeqp_send(ep->remote_dev, &msg); - } - mutex_unlock(&ep->rma_info.rma_lock); - - scif_free_window_offset(ep, window, window->offset); - scif_free(window->dma_addr, nr_pages * sizeof(*window->dma_addr)); - scif_free(window->num_pages, nr_pages * sizeof(*window->num_pages)); - scif_free(window, sizeof(*window)); -} - -/** - * scif_unmap_window: - * @remote_dev: SCIF remote device - * @window: registration window - * - * Delete any DMA mappings created for a registered self window - */ -void scif_unmap_window(struct scif_dev *remote_dev, struct scif_window *window) -{ - int j; - - if (scif_is_iommu_enabled() && !scifdev_self(remote_dev)) { - if (window->st) { - dma_unmap_sg(&remote_dev->sdev->dev, - window->st->sgl, window->st->nents, - DMA_BIDIRECTIONAL); - sg_free_table(window->st); - kfree(window->st); - window->st = NULL; - } - } else { - for (j = 0; j < window->nr_contig_chunks; j++) { - if (window->dma_addr[j]) { - scif_unmap_single(window->dma_addr[j], - remote_dev, - window->num_pages[j] << - PAGE_SHIFT); - window->dma_addr[j] = 0x0; - } - } - } -} - -static inline struct mm_struct *__scif_acquire_mm(void) -{ - if (scif_ulimit_check) - return get_task_mm(current); - return NULL; -} - -static inline void __scif_release_mm(struct mm_struct *mm) -{ - if (mm) - mmput(mm); -} - -static inline int -__scif_dec_pinned_vm_lock(struct mm_struct *mm, - int nr_pages) -{ - if (!mm || !nr_pages || !scif_ulimit_check) - return 0; - - atomic64_sub(nr_pages, &mm->pinned_vm); - return 0; -} - -static inline int __scif_check_inc_pinned_vm(struct mm_struct *mm, - int nr_pages) -{ - unsigned long locked, lock_limit; - - if (!mm || !nr_pages || !scif_ulimit_check) - return 0; - - lock_limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT; - locked = atomic64_add_return(nr_pages, &mm->pinned_vm); - - if ((locked > lock_limit) && !capable(CAP_IPC_LOCK)) { - atomic64_sub(nr_pages, &mm->pinned_vm); - dev_err(scif_info.mdev.this_device, - "locked(%lu) > lock_limit(%lu)\n", - locked, lock_limit); - return -ENOMEM; - } - return 0; -} - -/** - * scif_destroy_window: - * @ep: end point - * @window: registration window - * - * Deallocate resources for self window. - */ -int scif_destroy_window(struct scif_endpt *ep, struct scif_window *window) -{ - int j; - struct scif_pinned_pages *pinned_pages = window->pinned_pages; - int nr_pages = window->nr_pages; - - might_sleep(); - if (!window->temp && window->mm) { - __scif_dec_pinned_vm_lock(window->mm, window->nr_pages); - __scif_release_mm(window->mm); - window->mm = NULL; - } - - scif_free_window_offset(ep, window, window->offset); - scif_unmap_window(ep->remote_dev, window); - /* - * Decrement references for this set of pinned pages from - * this window. - */ - j = atomic_sub_return(1, &pinned_pages->ref_count); - if (j < 0) - dev_err(scif_info.mdev.this_device, - "%s %d incorrect ref count %d\n", - __func__, __LINE__, j); - /* - * If the ref count for pinned_pages is zero then someone - * has already called scif_unpin_pages() for it and we should - * destroy the page cache. - */ - if (!j) - scif_destroy_pinned_pages(window->pinned_pages); - scif_free(window->dma_addr, nr_pages * sizeof(*window->dma_addr)); - scif_free(window->num_pages, nr_pages * sizeof(*window->num_pages)); - window->magic = 0; - scif_free(window, sizeof(*window)); - return 0; -} - -/** - * scif_create_remote_lookup: - * @remote_dev: SCIF remote device - * @window: remote window - * - * Allocate and prepare lookup entries for the remote - * end to copy over the physical addresses. - * Returns 0 on success and appropriate errno on failure. - */ -static int scif_create_remote_lookup(struct scif_dev *remote_dev, - struct scif_window *window) -{ - int i, j, err = 0; - int nr_pages = window->nr_pages; - bool vmalloc_dma_phys, vmalloc_num_pages; - - might_sleep(); - /* Map window */ - err = scif_map_single(&window->mapped_offset, - window, remote_dev, sizeof(*window)); - if (err) - goto error_window; - - /* Compute the number of lookup entries. 21 == 2MB Shift */ - window->nr_lookup = ALIGN(nr_pages * PAGE_SIZE, - ((2) * 1024 * 1024)) >> 21; - - window->dma_addr_lookup.lookup = - scif_alloc_coherent(&window->dma_addr_lookup.offset, - remote_dev, window->nr_lookup * - sizeof(*window->dma_addr_lookup.lookup), - GFP_KERNEL | __GFP_ZERO); - if (!window->dma_addr_lookup.lookup) { - err = -ENOMEM; - goto error_window; - } - - window->num_pages_lookup.lookup = - scif_alloc_coherent(&window->num_pages_lookup.offset, - remote_dev, window->nr_lookup * - sizeof(*window->num_pages_lookup.lookup), - GFP_KERNEL | __GFP_ZERO); - if (!window->num_pages_lookup.lookup) { - err = -ENOMEM; - goto error_window; - } - - vmalloc_dma_phys = is_vmalloc_addr(&window->dma_addr[0]); - vmalloc_num_pages = is_vmalloc_addr(&window->num_pages[0]); - - /* Now map each of the pages containing physical addresses */ - for (i = 0, j = 0; i < nr_pages; i += SCIF_NR_ADDR_IN_PAGE, j++) { - err = scif_map_page(&window->dma_addr_lookup.lookup[j], - vmalloc_dma_phys ? - vmalloc_to_page(&window->dma_addr[i]) : - virt_to_page(&window->dma_addr[i]), - remote_dev); - if (err) - goto error_window; - err = scif_map_page(&window->num_pages_lookup.lookup[j], - vmalloc_num_pages ? - vmalloc_to_page(&window->num_pages[i]) : - virt_to_page(&window->num_pages[i]), - remote_dev); - if (err) - goto error_window; - } - return 0; -error_window: - return err; -} - -/** - * scif_destroy_remote_lookup: - * @remote_dev: SCIF remote device - * @window: remote window - * - * Destroy lookup entries used for the remote - * end to copy over the physical addresses. - */ -static void scif_destroy_remote_lookup(struct scif_dev *remote_dev, - struct scif_window *window) -{ - int i, j; - - if (window->nr_lookup) { - struct scif_rma_lookup *lup = &window->dma_addr_lookup; - struct scif_rma_lookup *npup = &window->num_pages_lookup; - - for (i = 0, j = 0; i < window->nr_pages; - i += SCIF_NR_ADDR_IN_PAGE, j++) { - if (lup->lookup && lup->lookup[j]) - scif_unmap_single(lup->lookup[j], - remote_dev, - PAGE_SIZE); - if (npup->lookup && npup->lookup[j]) - scif_unmap_single(npup->lookup[j], - remote_dev, - PAGE_SIZE); - } - if (lup->lookup) - scif_free_coherent(lup->lookup, lup->offset, - remote_dev, window->nr_lookup * - sizeof(*lup->lookup)); - if (npup->lookup) - scif_free_coherent(npup->lookup, npup->offset, - remote_dev, window->nr_lookup * - sizeof(*npup->lookup)); - if (window->mapped_offset) - scif_unmap_single(window->mapped_offset, - remote_dev, sizeof(*window)); - window->nr_lookup = 0; - } -} - -/** - * scif_create_remote_window: - * @scifdev: SCIF device - * @nr_pages: number of pages in window - * - * Allocate and prepare a remote registration window. - */ -static struct scif_window * -scif_create_remote_window(struct scif_dev *scifdev, int nr_pages) -{ - struct scif_window *window; - - might_sleep(); - window = scif_zalloc(sizeof(*window)); - if (!window) - goto error_ret; - - window->magic = SCIFEP_MAGIC; - window->nr_pages = nr_pages; - - window->dma_addr = scif_zalloc(nr_pages * sizeof(*window->dma_addr)); - if (!window->dma_addr) - goto error_window; - - window->num_pages = scif_zalloc(nr_pages * - sizeof(*window->num_pages)); - if (!window->num_pages) - goto error_window; - - if (scif_create_remote_lookup(scifdev, window)) - goto error_window; - - window->type = SCIF_WINDOW_PEER; - window->unreg_state = OP_IDLE; - INIT_LIST_HEAD(&window->list); - return window; -error_window: - scif_destroy_remote_window(window); -error_ret: - return NULL; -} - -/** - * scif_destroy_remote_window: - * @window: remote registration window - * - * Deallocate resources for remote window. - */ -void -scif_destroy_remote_window(struct scif_window *window) -{ - scif_free(window->dma_addr, window->nr_pages * - sizeof(*window->dma_addr)); - scif_free(window->num_pages, window->nr_pages * - sizeof(*window->num_pages)); - window->magic = 0; - scif_free(window, sizeof(*window)); -} - -/** - * scif_iommu_map: create DMA mappings if the IOMMU is enabled - * @remote_dev: SCIF remote device - * @window: remote registration window - * - * Map the physical pages using dma_map_sg(..) and then detect the number - * of contiguous DMA mappings allocated - */ -static int scif_iommu_map(struct scif_dev *remote_dev, - struct scif_window *window) -{ - struct scatterlist *sg; - int i, err; - scif_pinned_pages_t pin = window->pinned_pages; - - window->st = kzalloc(sizeof(*window->st), GFP_KERNEL); - if (!window->st) - return -ENOMEM; - - err = sg_alloc_table(window->st, window->nr_pages, GFP_KERNEL); - if (err) - return err; - - for_each_sg(window->st->sgl, sg, window->st->nents, i) - sg_set_page(sg, pin->pages[i], PAGE_SIZE, 0x0); - - err = dma_map_sg(&remote_dev->sdev->dev, window->st->sgl, - window->st->nents, DMA_BIDIRECTIONAL); - if (!err) - return -ENOMEM; - /* Detect contiguous ranges of DMA mappings */ - sg = window->st->sgl; - for (i = 0; sg; i++) { - dma_addr_t last_da; - - window->dma_addr[i] = sg_dma_address(sg); - window->num_pages[i] = sg_dma_len(sg) >> PAGE_SHIFT; - last_da = sg_dma_address(sg) + sg_dma_len(sg); - while ((sg = sg_next(sg)) && sg_dma_address(sg) == last_da) { - window->num_pages[i] += - (sg_dma_len(sg) >> PAGE_SHIFT); - last_da = window->dma_addr[i] + - sg_dma_len(sg); - } - window->nr_contig_chunks++; - } - return 0; -} - -/** - * scif_map_window: - * @remote_dev: SCIF remote device - * @window: self registration window - * - * Map pages of a window into the aperture/PCI. - * Also determine addresses required for DMA. - */ -int -scif_map_window(struct scif_dev *remote_dev, struct scif_window *window) -{ - int i, j, k, err = 0, nr_contig_pages; - scif_pinned_pages_t pin; - phys_addr_t phys_prev, phys_curr; - - might_sleep(); - - pin = window->pinned_pages; - - if (intel_iommu_enabled && !scifdev_self(remote_dev)) - return scif_iommu_map(remote_dev, window); - - for (i = 0, j = 0; i < window->nr_pages; i += nr_contig_pages, j++) { - phys_prev = page_to_phys(pin->pages[i]); - nr_contig_pages = 1; - - /* Detect physically contiguous chunks */ - for (k = i + 1; k < window->nr_pages; k++) { - phys_curr = page_to_phys(pin->pages[k]); - if (phys_curr != (phys_prev + PAGE_SIZE)) - break; - phys_prev = phys_curr; - nr_contig_pages++; - } - window->num_pages[j] = nr_contig_pages; - window->nr_contig_chunks++; - if (scif_is_mgmt_node()) { - /* - * Management node has to deal with SMPT on X100 and - * hence the DMA mapping is required - */ - err = scif_map_single(&window->dma_addr[j], - phys_to_virt(page_to_phys( - pin->pages[i])), - remote_dev, - nr_contig_pages << PAGE_SHIFT); - if (err) - return err; - } else { - window->dma_addr[j] = page_to_phys(pin->pages[i]); - } - } - return err; -} - -/** - * scif_send_scif_unregister: - * @ep: end point - * @window: self registration window - * - * Send a SCIF_UNREGISTER message. - */ -static int scif_send_scif_unregister(struct scif_endpt *ep, - struct scif_window *window) -{ - struct scifmsg msg; - - msg.uop = SCIF_UNREGISTER; - msg.src = ep->port; - msg.payload[0] = window->alloc_handle.vaddr; - msg.payload[1] = (u64)window; - return scif_nodeqp_send(ep->remote_dev, &msg); -} - -/** - * scif_unregister_window: - * @window: self registration window - * - * Send an unregistration request and wait for a response. - */ -int scif_unregister_window(struct scif_window *window) -{ - int err = 0; - struct scif_endpt *ep = (struct scif_endpt *)window->ep; - bool send_msg = false; - - might_sleep(); - switch (window->unreg_state) { - case OP_IDLE: - { - window->unreg_state = OP_IN_PROGRESS; - send_msg = true; - } - fallthrough; - case OP_IN_PROGRESS: - { - scif_get_window(window, 1); - mutex_unlock(&ep->rma_info.rma_lock); - if (send_msg) { - err = scif_send_scif_unregister(ep, window); - if (err) { - window->unreg_state = OP_COMPLETED; - goto done; - } - } else { - /* Return ENXIO since unregistration is in progress */ - mutex_lock(&ep->rma_info.rma_lock); - return -ENXIO; - } -retry: - /* Wait for a SCIF_UNREGISTER_(N)ACK message */ - err = wait_event_timeout(window->unregwq, - window->unreg_state != OP_IN_PROGRESS, - SCIF_NODE_ALIVE_TIMEOUT); - if (!err && scifdev_alive(ep)) - goto retry; - if (!err) { - err = -ENODEV; - window->unreg_state = OP_COMPLETED; - dev_err(scif_info.mdev.this_device, - "%s %d err %d\n", __func__, __LINE__, err); - } - if (err > 0) - err = 0; -done: - mutex_lock(&ep->rma_info.rma_lock); - scif_put_window(window, 1); - break; - } - case OP_FAILED: - { - if (!scifdev_alive(ep)) { - err = -ENODEV; - window->unreg_state = OP_COMPLETED; - } - break; - } - case OP_COMPLETED: - break; - default: - err = -ENODEV; - } - - if (window->unreg_state == OP_COMPLETED && window->ref_count) - scif_put_window(window, window->nr_pages); - - if (!window->ref_count) { - atomic_inc(&ep->rma_info.tw_refcount); - list_del_init(&window->list); - scif_free_window_offset(ep, window, window->offset); - mutex_unlock(&ep->rma_info.rma_lock); - if ((!!(window->pinned_pages->map_flags & SCIF_MAP_KERNEL)) && - scifdev_alive(ep)) { - scif_drain_dma_intr(ep->remote_dev->sdev, - ep->rma_info.dma_chan); - } else { - if (!__scif_dec_pinned_vm_lock(window->mm, - window->nr_pages)) { - __scif_release_mm(window->mm); - window->mm = NULL; - } - } - scif_queue_for_cleanup(window, &scif_info.rma); - mutex_lock(&ep->rma_info.rma_lock); - } - return err; -} - -/** - * scif_send_alloc_request: - * @ep: end point - * @window: self registration window - * - * Send a remote window allocation request - */ -static int scif_send_alloc_request(struct scif_endpt *ep, - struct scif_window *window) -{ - struct scifmsg msg; - struct scif_allocmsg *alloc = &window->alloc_handle; - - /* Set up the Alloc Handle */ - alloc->state = OP_IN_PROGRESS; - init_waitqueue_head(&alloc->allocwq); - - /* Send out an allocation request */ - msg.uop = SCIF_ALLOC_REQ; - msg.payload[1] = window->nr_pages; - msg.payload[2] = (u64)&window->alloc_handle; - return _scif_nodeqp_send(ep->remote_dev, &msg); -} - -/** - * scif_prep_remote_window: - * @ep: end point - * @window: self registration window - * - * Send a remote window allocation request, wait for an allocation response, - * and prepares the remote window by copying over the page lists - */ -static int scif_prep_remote_window(struct scif_endpt *ep, - struct scif_window *window) -{ - struct scifmsg msg; - struct scif_window *remote_window; - struct scif_allocmsg *alloc = &window->alloc_handle; - dma_addr_t *dma_phys_lookup, *tmp, *num_pages_lookup, *tmp1; - int i = 0, j = 0; - int nr_contig_chunks, loop_nr_contig_chunks; - int remaining_nr_contig_chunks, nr_lookup; - int err, map_err; - - map_err = scif_map_window(ep->remote_dev, window); - if (map_err) - dev_err(&ep->remote_dev->sdev->dev, - "%s %d map_err %d\n", __func__, __LINE__, map_err); - remaining_nr_contig_chunks = window->nr_contig_chunks; - nr_contig_chunks = window->nr_contig_chunks; -retry: - /* Wait for a SCIF_ALLOC_GNT/REJ message */ - err = wait_event_timeout(alloc->allocwq, - alloc->state != OP_IN_PROGRESS, - SCIF_NODE_ALIVE_TIMEOUT); - mutex_lock(&ep->rma_info.rma_lock); - /* Synchronize with the thread waking up allocwq */ - mutex_unlock(&ep->rma_info.rma_lock); - if (!err && scifdev_alive(ep)) - goto retry; - - if (!err) - err = -ENODEV; - - if (err > 0) - err = 0; - else - return err; - - /* Bail out. The remote end rejected this request */ - if (alloc->state == OP_FAILED) - return -ENOMEM; - - if (map_err) { - dev_err(&ep->remote_dev->sdev->dev, - "%s %d err %d\n", __func__, __LINE__, map_err); - msg.uop = SCIF_FREE_VIRT; - msg.src = ep->port; - msg.payload[0] = ep->remote_ep; - msg.payload[1] = window->alloc_handle.vaddr; - msg.payload[2] = (u64)window; - msg.payload[3] = SCIF_REGISTER; - spin_lock(&ep->lock); - if (ep->state == SCIFEP_CONNECTED) - err = _scif_nodeqp_send(ep->remote_dev, &msg); - else - err = -ENOTCONN; - spin_unlock(&ep->lock); - return err; - } - - remote_window = scif_ioremap(alloc->phys_addr, sizeof(*window), - ep->remote_dev); - - /* Compute the number of lookup entries. 21 == 2MB Shift */ - nr_lookup = ALIGN(nr_contig_chunks, SCIF_NR_ADDR_IN_PAGE) - >> ilog2(SCIF_NR_ADDR_IN_PAGE); - - dma_phys_lookup = - scif_ioremap(remote_window->dma_addr_lookup.offset, - nr_lookup * - sizeof(*remote_window->dma_addr_lookup.lookup), - ep->remote_dev); - num_pages_lookup = - scif_ioremap(remote_window->num_pages_lookup.offset, - nr_lookup * - sizeof(*remote_window->num_pages_lookup.lookup), - ep->remote_dev); - - while (remaining_nr_contig_chunks) { - loop_nr_contig_chunks = min_t(int, remaining_nr_contig_chunks, - (int)SCIF_NR_ADDR_IN_PAGE); - /* #1/2 - Copy physical addresses over to the remote side */ - - /* #2/2 - Copy DMA addresses (addresses that are fed into the - * DMA engine) We transfer bus addresses which are then - * converted into a MIC physical address on the remote - * side if it is a MIC, if the remote node is a mgmt node we - * transfer the MIC physical address - */ - tmp = scif_ioremap(dma_phys_lookup[j], - loop_nr_contig_chunks * - sizeof(*window->dma_addr), - ep->remote_dev); - tmp1 = scif_ioremap(num_pages_lookup[j], - loop_nr_contig_chunks * - sizeof(*window->num_pages), - ep->remote_dev); - if (scif_is_mgmt_node()) { - memcpy_toio((void __force __iomem *)tmp, - &window->dma_addr[i], loop_nr_contig_chunks - * sizeof(*window->dma_addr)); - memcpy_toio((void __force __iomem *)tmp1, - &window->num_pages[i], loop_nr_contig_chunks - * sizeof(*window->num_pages)); - } else { - if (scifdev_is_p2p(ep->remote_dev)) { - /* - * add remote node's base address for this node - * to convert it into a MIC address - */ - int m; - dma_addr_t dma_addr; - - for (m = 0; m < loop_nr_contig_chunks; m++) { - dma_addr = window->dma_addr[i + m] + - ep->remote_dev->base_addr; - writeq(dma_addr, - (void __force __iomem *)&tmp[m]); - } - memcpy_toio((void __force __iomem *)tmp1, - &window->num_pages[i], - loop_nr_contig_chunks - * sizeof(*window->num_pages)); - } else { - /* Mgmt node or loopback - transfer DMA - * addresses as is, this is the same as a - * MIC physical address (we use the dma_addr - * and not the phys_addr array since the - * phys_addr is only setup if there is a mmap() - * request from the mgmt node) - */ - memcpy_toio((void __force __iomem *)tmp, - &window->dma_addr[i], - loop_nr_contig_chunks * - sizeof(*window->dma_addr)); - memcpy_toio((void __force __iomem *)tmp1, - &window->num_pages[i], - loop_nr_contig_chunks * - sizeof(*window->num_pages)); - } - } - remaining_nr_contig_chunks -= loop_nr_contig_chunks; - i += loop_nr_contig_chunks; - j++; - scif_iounmap(tmp, loop_nr_contig_chunks * - sizeof(*window->dma_addr), ep->remote_dev); - scif_iounmap(tmp1, loop_nr_contig_chunks * - sizeof(*window->num_pages), ep->remote_dev); - } - - /* Prepare the remote window for the peer */ - remote_window->peer_window = (u64)window; - remote_window->offset = window->offset; - remote_window->prot = window->prot; - remote_window->nr_contig_chunks = nr_contig_chunks; - remote_window->ep = ep->remote_ep; - scif_iounmap(num_pages_lookup, - nr_lookup * - sizeof(*remote_window->num_pages_lookup.lookup), - ep->remote_dev); - scif_iounmap(dma_phys_lookup, - nr_lookup * - sizeof(*remote_window->dma_addr_lookup.lookup), - ep->remote_dev); - scif_iounmap(remote_window, sizeof(*remote_window), ep->remote_dev); - window->peer_window = alloc->vaddr; - return err; -} - -/** - * scif_send_scif_register: - * @ep: end point - * @window: self registration window - * - * Send a SCIF_REGISTER message if EP is connected and wait for a - * SCIF_REGISTER_(N)ACK message else send a SCIF_FREE_VIRT - * message so that the peer can free its remote window allocated earlier. - */ -static int scif_send_scif_register(struct scif_endpt *ep, - struct scif_window *window) -{ - int err = 0; - struct scifmsg msg; - - msg.src = ep->port; - msg.payload[0] = ep->remote_ep; - msg.payload[1] = window->alloc_handle.vaddr; - msg.payload[2] = (u64)window; - spin_lock(&ep->lock); - if (ep->state == SCIFEP_CONNECTED) { - msg.uop = SCIF_REGISTER; - window->reg_state = OP_IN_PROGRESS; - err = _scif_nodeqp_send(ep->remote_dev, &msg); - spin_unlock(&ep->lock); - if (!err) { -retry: - /* Wait for a SCIF_REGISTER_(N)ACK message */ - err = wait_event_timeout(window->regwq, - window->reg_state != - OP_IN_PROGRESS, - SCIF_NODE_ALIVE_TIMEOUT); - if (!err && scifdev_alive(ep)) - goto retry; - err = !err ? -ENODEV : 0; - if (window->reg_state == OP_FAILED) - err = -ENOTCONN; - } - } else { - msg.uop = SCIF_FREE_VIRT; - msg.payload[3] = SCIF_REGISTER; - err = _scif_nodeqp_send(ep->remote_dev, &msg); - spin_unlock(&ep->lock); - if (!err) - err = -ENOTCONN; - } - return err; -} - -/** - * scif_get_window_offset: - * @ep: end point descriptor - * @flags: flags - * @offset: offset hint - * @num_pages: number of pages - * @out_offset: computed offset returned by reference. - * - * Compute/Claim a new offset for this EP. - */ -int scif_get_window_offset(struct scif_endpt *ep, int flags, s64 offset, - int num_pages, s64 *out_offset) -{ - s64 page_index; - struct iova *iova_ptr; - int err = 0; - - if (flags & SCIF_MAP_FIXED) { - page_index = SCIF_IOVA_PFN(offset); - iova_ptr = reserve_iova(&ep->rma_info.iovad, page_index, - page_index + num_pages - 1); - if (!iova_ptr) - err = -EADDRINUSE; - } else { - iova_ptr = alloc_iova(&ep->rma_info.iovad, num_pages, - SCIF_DMA_63BIT_PFN - 1, 0); - if (!iova_ptr) - err = -ENOMEM; - } - if (!err) - *out_offset = (iova_ptr->pfn_lo) << PAGE_SHIFT; - return err; -} - -/** - * scif_free_window_offset: - * @ep: end point descriptor - * @window: registration window - * @offset: Offset to be freed - * - * Free offset for this EP. The callee is supposed to grab - * the RMA mutex before calling this API. - */ -void scif_free_window_offset(struct scif_endpt *ep, - struct scif_window *window, s64 offset) -{ - if ((window && !window->offset_freed) || !window) { - free_iova(&ep->rma_info.iovad, offset >> PAGE_SHIFT); - if (window) - window->offset_freed = true; - } -} - -/** - * scif_alloc_req: Respond to SCIF_ALLOC_REQ interrupt message - * @scifdev: SCIF device - * @msg: Interrupt message - * - * Remote side is requesting a memory allocation. - */ -void scif_alloc_req(struct scif_dev *scifdev, struct scifmsg *msg) -{ - int err; - struct scif_window *window = NULL; - int nr_pages = msg->payload[1]; - - window = scif_create_remote_window(scifdev, nr_pages); - if (!window) { - err = -ENOMEM; - goto error; - } - - /* The peer's allocation request is granted */ - msg->uop = SCIF_ALLOC_GNT; - msg->payload[0] = (u64)window; - msg->payload[1] = window->mapped_offset; - err = scif_nodeqp_send(scifdev, msg); - if (err) - scif_destroy_remote_window(window); - return; -error: - /* The peer's allocation request is rejected */ - dev_err(&scifdev->sdev->dev, - "%s %d error %d alloc_ptr %p nr_pages 0x%x\n", - __func__, __LINE__, err, window, nr_pages); - msg->uop = SCIF_ALLOC_REJ; - scif_nodeqp_send(scifdev, msg); -} - -/** - * scif_alloc_gnt_rej: Respond to SCIF_ALLOC_GNT/REJ interrupt message - * @scifdev: SCIF device - * @msg: Interrupt message - * - * Remote side responded to a memory allocation. - */ -void scif_alloc_gnt_rej(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_allocmsg *handle = (struct scif_allocmsg *)msg->payload[2]; - struct scif_window *window = container_of(handle, struct scif_window, - alloc_handle); - struct scif_endpt *ep = (struct scif_endpt *)window->ep; - - mutex_lock(&ep->rma_info.rma_lock); - handle->vaddr = msg->payload[0]; - handle->phys_addr = msg->payload[1]; - if (msg->uop == SCIF_ALLOC_GNT) - handle->state = OP_COMPLETED; - else - handle->state = OP_FAILED; - wake_up(&handle->allocwq); - mutex_unlock(&ep->rma_info.rma_lock); -} - -/** - * scif_free_virt: Respond to SCIF_FREE_VIRT interrupt message - * @scifdev: SCIF device - * @msg: Interrupt message - * - * Free up memory kmalloc'd earlier. - */ -void scif_free_virt(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_window *window = (struct scif_window *)msg->payload[1]; - - scif_destroy_remote_window(window); -} - -static void -scif_fixup_aper_base(struct scif_dev *dev, struct scif_window *window) -{ - int j; - struct scif_hw_dev *sdev = dev->sdev; - phys_addr_t apt_base = 0; - - /* - * Add the aperture base if the DMA address is not card relative - * since the DMA addresses need to be an offset into the bar - */ - if (!scifdev_self(dev) && window->type == SCIF_WINDOW_PEER && - sdev->aper && !sdev->card_rel_da) - apt_base = sdev->aper->pa; - else - return; - - for (j = 0; j < window->nr_contig_chunks; j++) { - if (window->num_pages[j]) - window->dma_addr[j] += apt_base; - else - break; - } -} - -/** - * scif_recv_reg: Respond to SCIF_REGISTER interrupt message - * @scifdev: SCIF device - * @msg: Interrupt message - * - * Update remote window list with a new registered window. - */ -void scif_recv_reg(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_endpt *ep = (struct scif_endpt *)msg->payload[0]; - struct scif_window *window = - (struct scif_window *)msg->payload[1]; - - mutex_lock(&ep->rma_info.rma_lock); - spin_lock(&ep->lock); - if (ep->state == SCIFEP_CONNECTED) { - msg->uop = SCIF_REGISTER_ACK; - scif_nodeqp_send(ep->remote_dev, msg); - scif_fixup_aper_base(ep->remote_dev, window); - /* No further failures expected. Insert new window */ - scif_insert_window(window, &ep->rma_info.remote_reg_list); - } else { - msg->uop = SCIF_REGISTER_NACK; - scif_nodeqp_send(ep->remote_dev, msg); - } - spin_unlock(&ep->lock); - mutex_unlock(&ep->rma_info.rma_lock); - /* free up any lookup resources now that page lists are transferred */ - scif_destroy_remote_lookup(ep->remote_dev, window); - /* - * We could not insert the window but we need to - * destroy the window. - */ - if (msg->uop == SCIF_REGISTER_NACK) - scif_destroy_remote_window(window); -} - -/** - * scif_recv_unreg: Respond to SCIF_UNREGISTER interrupt message - * @scifdev: SCIF device - * @msg: Interrupt message - * - * Remove window from remote registration list; - */ -void scif_recv_unreg(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_rma_req req; - struct scif_window *window = NULL; - struct scif_window *recv_window = - (struct scif_window *)msg->payload[0]; - struct scif_endpt *ep; - int del_window = 0; - - ep = (struct scif_endpt *)recv_window->ep; - req.out_window = &window; - req.offset = recv_window->offset; - req.prot = 0; - req.nr_bytes = recv_window->nr_pages << PAGE_SHIFT; - req.type = SCIF_WINDOW_FULL; - req.head = &ep->rma_info.remote_reg_list; - msg->payload[0] = ep->remote_ep; - - mutex_lock(&ep->rma_info.rma_lock); - /* Does a valid window exist? */ - if (scif_query_window(&req)) { - dev_err(&scifdev->sdev->dev, - "%s %d -ENXIO\n", __func__, __LINE__); - msg->uop = SCIF_UNREGISTER_ACK; - goto error; - } - if (window) { - if (window->ref_count) - scif_put_window(window, window->nr_pages); - else - dev_err(&scifdev->sdev->dev, - "%s %d ref count should be +ve\n", - __func__, __LINE__); - window->unreg_state = OP_COMPLETED; - if (!window->ref_count) { - msg->uop = SCIF_UNREGISTER_ACK; - atomic_inc(&ep->rma_info.tw_refcount); - ep->rma_info.async_list_del = 1; - list_del_init(&window->list); - del_window = 1; - } else { - /* NACK! There are valid references to this window */ - msg->uop = SCIF_UNREGISTER_NACK; - } - } else { - /* The window did not make its way to the list at all. ACK */ - msg->uop = SCIF_UNREGISTER_ACK; - scif_destroy_remote_window(recv_window); - } -error: - mutex_unlock(&ep->rma_info.rma_lock); - if (del_window) - scif_drain_dma_intr(ep->remote_dev->sdev, - ep->rma_info.dma_chan); - scif_nodeqp_send(ep->remote_dev, msg); - if (del_window) - scif_queue_for_cleanup(window, &scif_info.rma); -} - -/** - * scif_recv_reg_ack: Respond to SCIF_REGISTER_ACK interrupt message - * @scifdev: SCIF device - * @msg: Interrupt message - * - * Wake up the window waiting to complete registration. - */ -void scif_recv_reg_ack(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_window *window = - (struct scif_window *)msg->payload[2]; - struct scif_endpt *ep = (struct scif_endpt *)window->ep; - - mutex_lock(&ep->rma_info.rma_lock); - window->reg_state = OP_COMPLETED; - wake_up(&window->regwq); - mutex_unlock(&ep->rma_info.rma_lock); -} - -/** - * scif_recv_reg_nack: Respond to SCIF_REGISTER_NACK interrupt message - * @scifdev: SCIF device - * @msg: Interrupt message - * - * Wake up the window waiting to inform it that registration - * cannot be completed. - */ -void scif_recv_reg_nack(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_window *window = - (struct scif_window *)msg->payload[2]; - struct scif_endpt *ep = (struct scif_endpt *)window->ep; - - mutex_lock(&ep->rma_info.rma_lock); - window->reg_state = OP_FAILED; - wake_up(&window->regwq); - mutex_unlock(&ep->rma_info.rma_lock); -} - -/** - * scif_recv_unreg_ack: Respond to SCIF_UNREGISTER_ACK interrupt message - * @scifdev: SCIF device - * @msg: Interrupt message - * - * Wake up the window waiting to complete unregistration. - */ -void scif_recv_unreg_ack(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_window *window = - (struct scif_window *)msg->payload[1]; - struct scif_endpt *ep = (struct scif_endpt *)window->ep; - - mutex_lock(&ep->rma_info.rma_lock); - window->unreg_state = OP_COMPLETED; - wake_up(&window->unregwq); - mutex_unlock(&ep->rma_info.rma_lock); -} - -/** - * scif_recv_unreg_nack: Respond to SCIF_UNREGISTER_NACK interrupt message - * @scifdev: SCIF device - * @msg: Interrupt message - * - * Wake up the window waiting to inform it that unregistration - * cannot be completed immediately. - */ -void scif_recv_unreg_nack(struct scif_dev *scifdev, struct scifmsg *msg) -{ - struct scif_window *window = - (struct scif_window *)msg->payload[1]; - struct scif_endpt *ep = (struct scif_endpt *)window->ep; - - mutex_lock(&ep->rma_info.rma_lock); - window->unreg_state = OP_FAILED; - wake_up(&window->unregwq); - mutex_unlock(&ep->rma_info.rma_lock); -} - -int __scif_pin_pages(void *addr, size_t len, int *out_prot, - int map_flags, scif_pinned_pages_t *pages) -{ - struct scif_pinned_pages *pinned_pages; - int nr_pages, err = 0, i; - bool vmalloc_addr = false; - bool try_upgrade = false; - int prot = *out_prot; - int ulimit = 0; - struct mm_struct *mm = NULL; - - /* Unsupported flags */ - if (map_flags & ~(SCIF_MAP_KERNEL | SCIF_MAP_ULIMIT)) - return -EINVAL; - ulimit = !!(map_flags & SCIF_MAP_ULIMIT); - - /* Unsupported protection requested */ - if (prot & ~(SCIF_PROT_READ | SCIF_PROT_WRITE)) - return -EINVAL; - - /* addr/len must be page aligned. len should be non zero */ - if (!len || - (ALIGN((u64)addr, PAGE_SIZE) != (u64)addr) || - (ALIGN((u64)len, PAGE_SIZE) != (u64)len)) - return -EINVAL; - - might_sleep(); - - nr_pages = len >> PAGE_SHIFT; - - /* Allocate a set of pinned pages */ - pinned_pages = scif_create_pinned_pages(nr_pages, prot); - if (!pinned_pages) - return -ENOMEM; - - if (map_flags & SCIF_MAP_KERNEL) { - if (is_vmalloc_addr(addr)) - vmalloc_addr = true; - - for (i = 0; i < nr_pages; i++) { - if (vmalloc_addr) - pinned_pages->pages[i] = - vmalloc_to_page(addr + (i * PAGE_SIZE)); - else - pinned_pages->pages[i] = - virt_to_page(addr + (i * PAGE_SIZE)); - } - pinned_pages->nr_pages = nr_pages; - pinned_pages->map_flags = SCIF_MAP_KERNEL; - } else { - /* - * SCIF supports registration caching. If a registration has - * been requested with read only permissions, then we try - * to pin the pages with RW permissions so that a subsequent - * transfer with RW permission can hit the cache instead of - * invalidating it. If the upgrade fails with RW then we - * revert back to R permission and retry - */ - if (prot == SCIF_PROT_READ) - try_upgrade = true; - prot |= SCIF_PROT_WRITE; -retry: - mm = current->mm; - if (ulimit) { - err = __scif_check_inc_pinned_vm(mm, nr_pages); - if (err) { - pinned_pages->nr_pages = 0; - goto error_unmap; - } - } - - pinned_pages->nr_pages = pin_user_pages_fast( - (u64)addr, - nr_pages, - (prot & SCIF_PROT_WRITE) ? FOLL_WRITE : 0, - pinned_pages->pages); - if (nr_pages != pinned_pages->nr_pages) { - if (pinned_pages->nr_pages < 0) - pinned_pages->nr_pages = 0; - if (try_upgrade) { - if (ulimit) - __scif_dec_pinned_vm_lock(mm, nr_pages); - /* Roll back any pinned pages */ - unpin_user_pages(pinned_pages->pages, - pinned_pages->nr_pages); - prot &= ~SCIF_PROT_WRITE; - try_upgrade = false; - goto retry; - } - } - pinned_pages->map_flags = 0; - } - - if (pinned_pages->nr_pages < nr_pages) { - err = -EFAULT; - goto dec_pinned; - } - - *out_prot = prot; - atomic_set(&pinned_pages->ref_count, 1); - *pages = pinned_pages; - return err; -dec_pinned: - if (ulimit) - __scif_dec_pinned_vm_lock(mm, nr_pages); - /* Something went wrong! Rollback */ -error_unmap: - scif_destroy_pinned_pages(pinned_pages); - *pages = NULL; - dev_dbg(scif_info.mdev.this_device, - "%s %d err %d len 0x%lx\n", __func__, __LINE__, err, len); - return err; -} - -int scif_pin_pages(void *addr, size_t len, int prot, - int map_flags, scif_pinned_pages_t *pages) -{ - return __scif_pin_pages(addr, len, &prot, map_flags, pages); -} -EXPORT_SYMBOL_GPL(scif_pin_pages); - -int scif_unpin_pages(scif_pinned_pages_t pinned_pages) -{ - int err = 0, ret; - - if (!pinned_pages || SCIFEP_MAGIC != pinned_pages->magic) - return -EINVAL; - - ret = atomic_sub_return(1, &pinned_pages->ref_count); - if (ret < 0) { - dev_err(scif_info.mdev.this_device, - "%s %d scif_unpin_pages called without pinning? rc %d\n", - __func__, __LINE__, ret); - return -EINVAL; - } - /* - * Destroy the window if the ref count for this set of pinned - * pages has dropped to zero. If it is positive then there is - * a valid registered window which is backed by these pages and - * it will be destroyed once all such windows are unregistered. - */ - if (!ret) - err = scif_destroy_pinned_pages(pinned_pages); - - return err; -} -EXPORT_SYMBOL_GPL(scif_unpin_pages); - -static inline void -scif_insert_local_window(struct scif_window *window, struct scif_endpt *ep) -{ - mutex_lock(&ep->rma_info.rma_lock); - scif_insert_window(window, &ep->rma_info.reg_list); - mutex_unlock(&ep->rma_info.rma_lock); -} - -off_t scif_register_pinned_pages(scif_epd_t epd, - scif_pinned_pages_t pinned_pages, - off_t offset, int map_flags) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - s64 computed_offset; - struct scif_window *window; - int err; - size_t len; - struct device *spdev; - - /* Unsupported flags */ - if (map_flags & ~SCIF_MAP_FIXED) - return -EINVAL; - - len = pinned_pages->nr_pages << PAGE_SHIFT; - - /* - * Offset is not page aligned/negative or offset+len - * wraps around with SCIF_MAP_FIXED. - */ - if ((map_flags & SCIF_MAP_FIXED) && - ((ALIGN(offset, PAGE_SIZE) != offset) || - (offset < 0) || - (len > LONG_MAX - offset))) - return -EINVAL; - - might_sleep(); - - err = scif_verify_epd(ep); - if (err) - return err; - /* - * It is an error to pass pinned_pages to scif_register_pinned_pages() - * after calling scif_unpin_pages(). - */ - if (!atomic_add_unless(&pinned_pages->ref_count, 1, 0)) - return -EINVAL; - - /* Compute the offset for this registration */ - err = scif_get_window_offset(ep, map_flags, offset, - len, &computed_offset); - if (err) { - atomic_sub(1, &pinned_pages->ref_count); - return err; - } - - /* Allocate and prepare self registration window */ - window = scif_create_window(ep, pinned_pages->nr_pages, - computed_offset, false); - if (!window) { - atomic_sub(1, &pinned_pages->ref_count); - scif_free_window_offset(ep, NULL, computed_offset); - return -ENOMEM; - } - - window->pinned_pages = pinned_pages; - window->nr_pages = pinned_pages->nr_pages; - window->prot = pinned_pages->prot; - - spdev = scif_get_peer_dev(ep->remote_dev); - if (IS_ERR(spdev)) { - err = PTR_ERR(spdev); - scif_destroy_window(ep, window); - return err; - } - err = scif_send_alloc_request(ep, window); - if (err) { - dev_err(&ep->remote_dev->sdev->dev, - "%s %d err %d\n", __func__, __LINE__, err); - goto error_unmap; - } - - /* Prepare the remote registration window */ - err = scif_prep_remote_window(ep, window); - if (err) { - dev_err(&ep->remote_dev->sdev->dev, - "%s %d err %d\n", __func__, __LINE__, err); - goto error_unmap; - } - - /* Tell the peer about the new window */ - err = scif_send_scif_register(ep, window); - if (err) { - dev_err(&ep->remote_dev->sdev->dev, - "%s %d err %d\n", __func__, __LINE__, err); - goto error_unmap; - } - - scif_put_peer_dev(spdev); - /* No further failures expected. Insert new window */ - scif_insert_local_window(window, ep); - return computed_offset; -error_unmap: - scif_destroy_window(ep, window); - scif_put_peer_dev(spdev); - dev_err(&ep->remote_dev->sdev->dev, - "%s %d err %d\n", __func__, __LINE__, err); - return err; -} -EXPORT_SYMBOL_GPL(scif_register_pinned_pages); - -off_t scif_register(scif_epd_t epd, void *addr, size_t len, off_t offset, - int prot, int map_flags) -{ - scif_pinned_pages_t pinned_pages; - off_t err; - struct scif_endpt *ep = (struct scif_endpt *)epd; - s64 computed_offset; - struct scif_window *window; - struct mm_struct *mm = NULL; - struct device *spdev; - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI register: ep %p addr %p len 0x%lx offset 0x%lx prot 0x%x map_flags 0x%x\n", - epd, addr, len, offset, prot, map_flags); - /* Unsupported flags */ - if (map_flags & ~(SCIF_MAP_FIXED | SCIF_MAP_KERNEL)) - return -EINVAL; - - /* - * Offset is not page aligned/negative or offset+len - * wraps around with SCIF_MAP_FIXED. - */ - if ((map_flags & SCIF_MAP_FIXED) && - ((ALIGN(offset, PAGE_SIZE) != offset) || - (offset < 0) || - (len > LONG_MAX - offset))) - return -EINVAL; - - /* Unsupported protection requested */ - if (prot & ~(SCIF_PROT_READ | SCIF_PROT_WRITE)) - return -EINVAL; - - /* addr/len must be page aligned. len should be non zero */ - if (!len || (ALIGN((u64)addr, PAGE_SIZE) != (u64)addr) || - (ALIGN(len, PAGE_SIZE) != len)) - return -EINVAL; - - might_sleep(); - - err = scif_verify_epd(ep); - if (err) - return err; - - /* Compute the offset for this registration */ - err = scif_get_window_offset(ep, map_flags, offset, - len >> PAGE_SHIFT, &computed_offset); - if (err) - return err; - - spdev = scif_get_peer_dev(ep->remote_dev); - if (IS_ERR(spdev)) { - err = PTR_ERR(spdev); - scif_free_window_offset(ep, NULL, computed_offset); - return err; - } - /* Allocate and prepare self registration window */ - window = scif_create_window(ep, len >> PAGE_SHIFT, - computed_offset, false); - if (!window) { - scif_free_window_offset(ep, NULL, computed_offset); - scif_put_peer_dev(spdev); - return -ENOMEM; - } - - window->nr_pages = len >> PAGE_SHIFT; - - err = scif_send_alloc_request(ep, window); - if (err) { - scif_destroy_incomplete_window(ep, window); - scif_put_peer_dev(spdev); - return err; - } - - if (!(map_flags & SCIF_MAP_KERNEL)) { - mm = __scif_acquire_mm(); - map_flags |= SCIF_MAP_ULIMIT; - } - /* Pin down the pages */ - err = __scif_pin_pages(addr, len, &prot, - map_flags & (SCIF_MAP_KERNEL | SCIF_MAP_ULIMIT), - &pinned_pages); - if (err) { - scif_destroy_incomplete_window(ep, window); - __scif_release_mm(mm); - goto error; - } - - window->pinned_pages = pinned_pages; - window->prot = pinned_pages->prot; - window->mm = mm; - - /* Prepare the remote registration window */ - err = scif_prep_remote_window(ep, window); - if (err) { - dev_err(&ep->remote_dev->sdev->dev, - "%s %d err %ld\n", __func__, __LINE__, err); - goto error_unmap; - } - - /* Tell the peer about the new window */ - err = scif_send_scif_register(ep, window); - if (err) { - dev_err(&ep->remote_dev->sdev->dev, - "%s %d err %ld\n", __func__, __LINE__, err); - goto error_unmap; - } - - scif_put_peer_dev(spdev); - /* No further failures expected. Insert new window */ - scif_insert_local_window(window, ep); - dev_dbg(&ep->remote_dev->sdev->dev, - "SCIFAPI register: ep %p addr %p len 0x%lx computed_offset 0x%llx\n", - epd, addr, len, computed_offset); - return computed_offset; -error_unmap: - scif_destroy_window(ep, window); -error: - scif_put_peer_dev(spdev); - dev_err(&ep->remote_dev->sdev->dev, - "%s %d err %ld\n", __func__, __LINE__, err); - return err; -} -EXPORT_SYMBOL_GPL(scif_register); - -int -scif_unregister(scif_epd_t epd, off_t offset, size_t len) -{ - struct scif_endpt *ep = (struct scif_endpt *)epd; - struct scif_window *window = NULL; - struct scif_rma_req req; - int nr_pages, err; - struct device *spdev; - - dev_dbg(scif_info.mdev.this_device, - "SCIFAPI unregister: ep %p offset 0x%lx len 0x%lx\n", - ep, offset, len); - /* len must be page aligned. len should be non zero */ - if (!len || - (ALIGN((u64)len, PAGE_SIZE) != (u64)len)) - return -EINVAL; - - /* Offset is not page aligned or offset+len wraps around */ - if ((ALIGN(offset, PAGE_SIZE) != offset) || - (offset < 0) || - (len > LONG_MAX - offset)) - return -EINVAL; - - err = scif_verify_epd(ep); - if (err) - return err; - - might_sleep(); - nr_pages = len >> PAGE_SHIFT; - - req.out_window = &window; - req.offset = offset; - req.prot = 0; - req.nr_bytes = len; - req.type = SCIF_WINDOW_FULL; - req.head = &ep->rma_info.reg_list; - - spdev = scif_get_peer_dev(ep->remote_dev); - if (IS_ERR(spdev)) { - err = PTR_ERR(spdev); - return err; - } - mutex_lock(&ep->rma_info.rma_lock); - /* Does a valid window exist? */ - err = scif_query_window(&req); - if (err) { - dev_err(&ep->remote_dev->sdev->dev, - "%s %d err %d\n", __func__, __LINE__, err); - goto error; - } - /* Unregister all the windows in this range */ - err = scif_rma_list_unregister(window, offset, nr_pages); - if (err) - dev_err(&ep->remote_dev->sdev->dev, - "%s %d err %d\n", __func__, __LINE__, err); -error: - mutex_unlock(&ep->rma_info.rma_lock); - scif_put_peer_dev(spdev); - return err; -} -EXPORT_SYMBOL_GPL(scif_unregister); diff --git a/drivers/misc/mic/scif/scif_rma.h b/drivers/misc/mic/scif/scif_rma.h deleted file mode 100644 index 964dd0fc3657..000000000000 --- a/drivers/misc/mic/scif/scif_rma.h +++ /dev/null @@ -1,477 +0,0 @@ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2015 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * BSD LICENSE - * - * Copyright(c) 2015 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Intel SCIF driver. - * - */ -#ifndef SCIF_RMA_H -#define SCIF_RMA_H - -#include <linux/intel-iommu.h> -#include <linux/mmu_notifier.h> - -#include "../bus/scif_bus.h" - -/* If this bit is set then the mark is a remote fence mark */ -#define SCIF_REMOTE_FENCE_BIT 31 -/* Magic value used to indicate a remote fence request */ -#define SCIF_REMOTE_FENCE BIT_ULL(SCIF_REMOTE_FENCE_BIT) - -#define SCIF_MAX_UNALIGNED_BUF_SIZE (1024 * 1024ULL) -#define SCIF_KMEM_UNALIGNED_BUF_SIZE (SCIF_MAX_UNALIGNED_BUF_SIZE + \ - (L1_CACHE_BYTES << 1)) - -#define SCIF_IOVA_START_PFN (1) -#define SCIF_IOVA_PFN(addr) ((addr) >> PAGE_SHIFT) -#define SCIF_DMA_64BIT_PFN SCIF_IOVA_PFN(DMA_BIT_MASK(64)) -#define SCIF_DMA_63BIT_PFN SCIF_IOVA_PFN(DMA_BIT_MASK(63)) - -/* - * struct scif_endpt_rma_info - Per Endpoint Remote Memory Access Information - * - * @reg_list: List of registration windows for self - * @remote_reg_list: List of registration windows for peer - * @iovad: Offset generator - * @rma_lock: Synchronizes access to self/remote list and also protects the - * window from being destroyed while RMAs are in progress. - * @tc_lock: Synchronizes access to temporary cached windows list - * for SCIF Registration Caching. - * @mmn_lock: Synchronizes access to the list of MMU notifiers registered - * @tw_refcount: Keeps track of number of outstanding temporary registered - * windows created by scif_vreadfrom/scif_vwriteto which have - * not been destroyed. - * @tcw_refcount: Same as tw_refcount but for temporary cached windows - * @tcw_total_pages: Same as tcw_refcount but in terms of pages pinned - * @mmn_list: MMU notifier so that we can destroy the windows when required - * @fence_refcount: Keeps track of number of outstanding remote fence - * requests which have been received by the peer. - * @dma_chan: DMA channel used for all DMA transfers for this endpoint. - * @async_list_del: Detect asynchronous list entry deletion - * @vma_list: List of vmas with remote memory mappings - * @markwq: Wait queue used for scif_fence_mark/scif_fence_wait -*/ -struct scif_endpt_rma_info { - struct list_head reg_list; - struct list_head remote_reg_list; - struct iova_domain iovad; - struct mutex rma_lock; - spinlock_t tc_lock; - struct mutex mmn_lock; - atomic_t tw_refcount; - atomic_t tcw_refcount; - atomic_t tcw_total_pages; - struct list_head mmn_list; - atomic_t fence_refcount; - struct dma_chan *dma_chan; - int async_list_del; - struct list_head vma_list; - wait_queue_head_t markwq; -}; - -/* - * struct scif_fence_info - used for tracking fence requests - * - * @state: State of this transfer - * @wq: Fences wait on this queue - * @dma_mark: Used for storing the DMA mark - */ -struct scif_fence_info { - enum scif_msg_state state; - struct completion comp; - int dma_mark; -}; - -/* - * struct scif_remote_fence_info - used for tracking remote fence requests - * - * @msg: List of SCIF node QP fence messages - * @list: Link to list of remote fence requests - */ -struct scif_remote_fence_info { - struct scifmsg msg; - struct list_head list; -}; - -/* - * Specifies whether an RMA operation can span across partial windows, a single - * window or multiple contiguous windows. Mmaps can span across partial windows. - * Unregistration can span across complete windows. scif_get_pages() can span a - * single window. A window can also be of type self or peer. - */ -enum scif_window_type { - SCIF_WINDOW_PARTIAL, - SCIF_WINDOW_SINGLE, - SCIF_WINDOW_FULL, - SCIF_WINDOW_SELF, - SCIF_WINDOW_PEER -}; - -/* The number of physical addresses that can be stored in a PAGE. */ -#define SCIF_NR_ADDR_IN_PAGE (0x1000 >> 3) - -/* - * struct scif_rma_lookup - RMA lookup data structure for page list transfers - * - * Store an array of lookup offsets. Each offset in this array maps - * one 4K page containing 512 physical addresses i.e. 2MB. 512 such - * offsets in a 4K page will correspond to 1GB of registered address space. - - * @lookup: Array of offsets - * @offset: DMA offset of lookup array - */ -struct scif_rma_lookup { - dma_addr_t *lookup; - dma_addr_t offset; -}; - -/* - * struct scif_pinned_pages - A set of pinned pages obtained with - * scif_pin_pages() which could be part of multiple registered - * windows across different end points. - * - * @nr_pages: Number of pages which is defined as a s64 instead of an int - * to avoid sign extension with buffers >= 2GB - * @prot: read/write protections - * @map_flags: Flags specified during the pin operation - * @ref_count: Reference count bumped in terms of number of pages - * @magic: A magic value - * @pages: Array of pointers to struct pages populated with get_user_pages(..) - */ -struct scif_pinned_pages { - s64 nr_pages; - int prot; - int map_flags; - atomic_t ref_count; - u64 magic; - struct page **pages; -}; - -/* - * struct scif_status - Stores DMA status update information - * - * @src_dma_addr: Source buffer DMA address - * @val: src location for value to be written to the destination - * @ep: SCIF endpoint - */ -struct scif_status { - dma_addr_t src_dma_addr; - u64 val; - struct scif_endpt *ep; -}; - -/* - * struct scif_cb_arg - Stores the argument of the callback func - * - * @src_dma_addr: Source buffer DMA address - * @status: DMA status - * @ep: SCIF endpoint - */ -struct scif_cb_arg { - dma_addr_t src_dma_addr; - struct scif_status *status; - struct scif_endpt *ep; -}; - -/* - * struct scif_window - Registration Window for Self and Remote - * - * @nr_pages: Number of pages which is defined as a s64 instead of an int - * to avoid sign extension with buffers >= 2GB - * @nr_contig_chunks: Number of contiguous physical chunks - * @prot: read/write protections - * @ref_count: reference count in terms of number of pages - * @magic: Cookie to detect corruption - * @offset: registered offset - * @va_for_temp: va address that this window represents - * @dma_mark: Used to determine if all DMAs against the window are done - * @ep: Pointer to EP. Useful for passing EP around with messages to - avoid expensive list traversals. - * @list: link to list of windows for the endpoint - * @type: self or peer window - * @peer_window: Pointer to peer window. Useful for sending messages to peer - * without requiring an extra list traversal - * @unreg_state: unregistration state - * @offset_freed: True if the offset has been freed - * @temp: True for temporary windows created via scif_vreadfrom/scif_vwriteto - * @mm: memory descriptor for the task_struct which initiated the RMA - * @st: scatter gather table for DMA mappings with IOMMU enabled - * @pinned_pages: The set of pinned_pages backing this window - * @alloc_handle: Handle for sending ALLOC_REQ - * @regwq: Wait Queue for an registration (N)ACK - * @reg_state: Registration state - * @unregwq: Wait Queue for an unregistration (N)ACK - * @dma_addr_lookup: Lookup for physical addresses used for DMA - * @nr_lookup: Number of entries in lookup - * @mapped_offset: Offset used to map the window by the peer - * @dma_addr: Array of physical addresses used for Mgmt node & MIC initiated DMA - * @num_pages: Array specifying number of pages for each physical address - */ -struct scif_window { - s64 nr_pages; - int nr_contig_chunks; - int prot; - int ref_count; - u64 magic; - s64 offset; - unsigned long va_for_temp; - int dma_mark; - u64 ep; - struct list_head list; - enum scif_window_type type; - u64 peer_window; - enum scif_msg_state unreg_state; - bool offset_freed; - bool temp; - struct mm_struct *mm; - struct sg_table *st; - union { - struct { - struct scif_pinned_pages *pinned_pages; - struct scif_allocmsg alloc_handle; - wait_queue_head_t regwq; - enum scif_msg_state reg_state; - wait_queue_head_t unregwq; - }; - struct { - struct scif_rma_lookup dma_addr_lookup; - struct scif_rma_lookup num_pages_lookup; - int nr_lookup; - dma_addr_t mapped_offset; - }; - }; - dma_addr_t *dma_addr; - u64 *num_pages; -} __packed; - -/* - * scif_mmu_notif - SCIF mmu notifier information - * - * @mmu_notifier ep_mmu_notifier: MMU notifier operations - * @tc_reg_list: List of temp registration windows for self - * @mm: memory descriptor for the task_struct which initiated the RMA - * @ep: SCIF endpoint - * @list: link to list of MMU notifier information - */ -struct scif_mmu_notif { -#ifdef CONFIG_MMU_NOTIFIER - struct mmu_notifier ep_mmu_notifier; -#endif - struct list_head tc_reg_list; - struct mm_struct *mm; - struct scif_endpt *ep; - struct list_head list; -}; - -enum scif_rma_dir { - SCIF_LOCAL_TO_REMOTE, - SCIF_REMOTE_TO_LOCAL -}; - -extern struct kmem_cache *unaligned_cache; -/* Initialize RMA for this EP */ -void scif_rma_ep_init(struct scif_endpt *ep); -/* Check if epd can be uninitialized */ -int scif_rma_ep_can_uninit(struct scif_endpt *ep); -/* Obtain a new offset. Callee must grab RMA lock */ -int scif_get_window_offset(struct scif_endpt *ep, int flags, - s64 offset, int nr_pages, s64 *out_offset); -/* Free offset. Callee must grab RMA lock */ -void scif_free_window_offset(struct scif_endpt *ep, - struct scif_window *window, s64 offset); -/* Create self registration window */ -struct scif_window *scif_create_window(struct scif_endpt *ep, int nr_pages, - s64 offset, bool temp); -/* Destroy self registration window.*/ -int scif_destroy_window(struct scif_endpt *ep, struct scif_window *window); -void scif_unmap_window(struct scif_dev *remote_dev, struct scif_window *window); -/* Map pages of self window to Aperture/PCI */ -int scif_map_window(struct scif_dev *remote_dev, - struct scif_window *window); -/* Unregister a self window */ -int scif_unregister_window(struct scif_window *window); -/* Destroy remote registration window */ -void -scif_destroy_remote_window(struct scif_window *window); -/* remove valid remote memory mappings from process address space */ -void scif_zap_mmaps(int node); -/* Query if any applications have remote memory mappings */ -bool scif_rma_do_apps_have_mmaps(int node); -/* Cleanup remote registration lists for zombie endpoints */ -void scif_cleanup_rma_for_zombies(int node); -/* Reserve a DMA channel for a particular endpoint */ -int scif_reserve_dma_chan(struct scif_endpt *ep); -/* Setup a DMA mark for an endpoint */ -int _scif_fence_mark(scif_epd_t epd, int *mark); -int scif_prog_signal(scif_epd_t epd, off_t offset, u64 val, - enum scif_window_type type); -void scif_alloc_req(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_alloc_gnt_rej(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_free_virt(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_recv_reg(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_recv_unreg(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_recv_reg_ack(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_recv_reg_nack(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_recv_unreg_ack(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_recv_unreg_nack(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_recv_munmap(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_recv_mark(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_recv_mark_resp(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_recv_wait(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_recv_wait_resp(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_recv_sig_local(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_recv_sig_remote(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_recv_sig_resp(struct scif_dev *scifdev, struct scifmsg *msg); -void scif_mmu_notif_handler(struct work_struct *work); -void scif_rma_handle_remote_fences(void); -void scif_rma_destroy_windows(void); -void scif_rma_destroy_tcw_invalid(void); -int scif_drain_dma_intr(struct scif_hw_dev *sdev, struct dma_chan *chan); - -struct scif_window_iter { - s64 offset; - int index; -}; - -static inline void -scif_init_window_iter(struct scif_window *window, struct scif_window_iter *iter) -{ - iter->offset = window->offset; - iter->index = 0; -} - -dma_addr_t scif_off_to_dma_addr(struct scif_window *window, s64 off, - size_t *nr_bytes, - struct scif_window_iter *iter); -static inline -dma_addr_t __scif_off_to_dma_addr(struct scif_window *window, s64 off) -{ - return scif_off_to_dma_addr(window, off, NULL, NULL); -} - -static inline bool scif_unaligned(off_t src_offset, off_t dst_offset) -{ - src_offset = src_offset & (L1_CACHE_BYTES - 1); - dst_offset = dst_offset & (L1_CACHE_BYTES - 1); - return !(src_offset == dst_offset); -} - -/* - * scif_zalloc: - * @size: Size of the allocation request. - * - * Helper API which attempts to allocate zeroed pages via - * __get_free_pages(..) first and then falls back on - * vzalloc(..) if that fails. - */ -static inline void *scif_zalloc(size_t size) -{ - void *ret = NULL; - size_t align = ALIGN(size, PAGE_SIZE); - - if (align && get_order(align) < MAX_ORDER) - ret = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, - get_order(align)); - return ret ? ret : vzalloc(align); -} - -/* - * scif_free: - * @addr: Address to be freed. - * @size: Size of the allocation. - * Helper API which frees memory allocated via scif_zalloc(). - */ -static inline void scif_free(void *addr, size_t size) -{ - size_t align = ALIGN(size, PAGE_SIZE); - - if (is_vmalloc_addr(addr)) - vfree(addr); - else - free_pages((unsigned long)addr, get_order(align)); -} - -static inline void scif_get_window(struct scif_window *window, int nr_pages) -{ - window->ref_count += nr_pages; -} - -static inline void scif_put_window(struct scif_window *window, int nr_pages) -{ - window->ref_count -= nr_pages; -} - -static inline void scif_set_window_ref(struct scif_window *window, int nr_pages) -{ - window->ref_count = nr_pages; -} - -static inline void -scif_queue_for_cleanup(struct scif_window *window, struct list_head *list) -{ - spin_lock(&scif_info.rmalock); - list_add_tail(&window->list, list); - spin_unlock(&scif_info.rmalock); - schedule_work(&scif_info.misc_work); -} - -static inline void __scif_rma_destroy_tcw_helper(struct scif_window *window) -{ - list_del_init(&window->list); - scif_queue_for_cleanup(window, &scif_info.rma_tc); -} - -static inline bool scif_is_iommu_enabled(void) -{ -#ifdef CONFIG_INTEL_IOMMU - return intel_iommu_enabled; -#else - return false; -#endif -} -#endif /* SCIF_RMA_H */ diff --git a/drivers/misc/mic/scif/scif_rma_list.c b/drivers/misc/mic/scif/scif_rma_list.c deleted file mode 100644 index ef923ba134c8..000000000000 --- a/drivers/misc/mic/scif/scif_rma_list.c +++ /dev/null @@ -1,282 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2015 Intel Corporation. - * - * Intel SCIF driver. - */ -#include "scif_main.h" -#include <linux/mmu_notifier.h> -#include <linux/highmem.h> - -/* - * scif_insert_tcw: - * - * Insert a temp window to the temp registration list sorted by va_for_temp. - * RMA lock must be held. - */ -void scif_insert_tcw(struct scif_window *window, struct list_head *head) -{ - struct scif_window *curr = NULL; - struct scif_window *prev = list_entry(head, struct scif_window, list); - struct list_head *item; - - INIT_LIST_HEAD(&window->list); - /* Compare with tail and if the entry is new tail add it to the end */ - if (!list_empty(head)) { - curr = list_entry(head->prev, struct scif_window, list); - if (curr->va_for_temp < window->va_for_temp) { - list_add_tail(&window->list, head); - return; - } - } - list_for_each(item, head) { - curr = list_entry(item, struct scif_window, list); - if (curr->va_for_temp > window->va_for_temp) - break; - prev = curr; - } - list_add(&window->list, &prev->list); -} - -/* - * scif_insert_window: - * - * Insert a window to the self registration list sorted by offset. - * RMA lock must be held. - */ -void scif_insert_window(struct scif_window *window, struct list_head *head) -{ - struct scif_window *curr = NULL, *prev = NULL; - struct list_head *item; - - INIT_LIST_HEAD(&window->list); - list_for_each(item, head) { - curr = list_entry(item, struct scif_window, list); - if (curr->offset > window->offset) - break; - prev = curr; - } - if (!prev) - list_add(&window->list, head); - else - list_add(&window->list, &prev->list); - scif_set_window_ref(window, window->nr_pages); -} - -/* - * scif_query_tcw: - * - * Query the temp cached registration list of ep for an overlapping window - * in case of permission mismatch, destroy the previous window. if permissions - * match and overlap is partial, destroy the window but return the new range - * RMA lock must be held. - */ -int scif_query_tcw(struct scif_endpt *ep, struct scif_rma_req *req) -{ - struct list_head *item, *temp, *head = req->head; - struct scif_window *window; - u64 start_va_window, start_va_req = req->va_for_temp; - u64 end_va_window, end_va_req = start_va_req + req->nr_bytes; - - if (!req->nr_bytes) - return -EINVAL; - /* - * Avoid traversing the entire list to find out that there - * is no entry that matches - */ - if (!list_empty(head)) { - window = list_last_entry(head, struct scif_window, list); - end_va_window = window->va_for_temp + - (window->nr_pages << PAGE_SHIFT); - if (start_va_req > end_va_window) - return -ENXIO; - } - list_for_each_safe(item, temp, head) { - window = list_entry(item, struct scif_window, list); - start_va_window = window->va_for_temp; - end_va_window = window->va_for_temp + - (window->nr_pages << PAGE_SHIFT); - if (start_va_req < start_va_window && - end_va_req < start_va_window) - break; - if (start_va_req >= end_va_window) - continue; - if ((window->prot & req->prot) == req->prot) { - if (start_va_req >= start_va_window && - end_va_req <= end_va_window) { - *req->out_window = window; - return 0; - } - /* expand window */ - if (start_va_req < start_va_window) { - req->nr_bytes += - start_va_window - start_va_req; - req->va_for_temp = start_va_window; - } - if (end_va_req >= end_va_window) - req->nr_bytes += end_va_window - end_va_req; - } - /* Destroy the old window to create a new one */ - __scif_rma_destroy_tcw_helper(window); - break; - } - return -ENXIO; -} - -/* - * scif_query_window: - * - * Query the registration list and check if a valid contiguous - * range of windows exist. - * RMA lock must be held. - */ -int scif_query_window(struct scif_rma_req *req) -{ - struct list_head *item; - struct scif_window *window; - s64 end_offset, offset = req->offset; - u64 tmp_min, nr_bytes_left = req->nr_bytes; - - if (!req->nr_bytes) - return -EINVAL; - - list_for_each(item, req->head) { - window = list_entry(item, struct scif_window, list); - end_offset = window->offset + - (window->nr_pages << PAGE_SHIFT); - if (offset < window->offset) - /* Offset not found! */ - return -ENXIO; - if (offset >= end_offset) - continue; - /* Check read/write protections. */ - if ((window->prot & req->prot) != req->prot) - return -EPERM; - if (nr_bytes_left == req->nr_bytes) - /* Store the first window */ - *req->out_window = window; - tmp_min = min((u64)end_offset - offset, nr_bytes_left); - nr_bytes_left -= tmp_min; - offset += tmp_min; - /* - * Range requested encompasses - * multiple windows contiguously. - */ - if (!nr_bytes_left) { - /* Done for partial window */ - if (req->type == SCIF_WINDOW_PARTIAL || - req->type == SCIF_WINDOW_SINGLE) - return 0; - /* Extra logic for full windows */ - if (offset == end_offset) - /* Spanning multiple whole windows */ - return 0; - /* Not spanning multiple whole windows */ - return -ENXIO; - } - if (req->type == SCIF_WINDOW_SINGLE) - break; - } - dev_err(scif_info.mdev.this_device, - "%s %d ENXIO\n", __func__, __LINE__); - return -ENXIO; -} - -/* - * scif_rma_list_unregister: - * - * Traverse the self registration list starting from window: - * 1) Call scif_unregister_window(..) - * RMA lock must be held. - */ -int scif_rma_list_unregister(struct scif_window *window, - s64 offset, int nr_pages) -{ - struct scif_endpt *ep = (struct scif_endpt *)window->ep; - struct list_head *head = &ep->rma_info.reg_list; - s64 end_offset; - int err = 0; - int loop_nr_pages; - struct scif_window *_window; - - list_for_each_entry_safe_from(window, _window, head, list) { - end_offset = window->offset + (window->nr_pages << PAGE_SHIFT); - loop_nr_pages = min((int)((end_offset - offset) >> PAGE_SHIFT), - nr_pages); - err = scif_unregister_window(window); - if (err) - return err; - nr_pages -= loop_nr_pages; - offset += (loop_nr_pages << PAGE_SHIFT); - if (!nr_pages) - break; - } - return 0; -} - -/* - * scif_unmap_all_window: - * - * Traverse all the windows in the self registration list and: - * 1) Delete any DMA mappings created - */ -void scif_unmap_all_windows(scif_epd_t epd) -{ - struct list_head *item, *tmp; - struct scif_window *window; - struct scif_endpt *ep = (struct scif_endpt *)epd; - struct list_head *head = &ep->rma_info.reg_list; - - mutex_lock(&ep->rma_info.rma_lock); - list_for_each_safe(item, tmp, head) { - window = list_entry(item, struct scif_window, list); - scif_unmap_window(ep->remote_dev, window); - } - mutex_unlock(&ep->rma_info.rma_lock); -} - -/* - * scif_unregister_all_window: - * - * Traverse all the windows in the self registration list and: - * 1) Call scif_unregister_window(..) - * RMA lock must be held. - */ -int scif_unregister_all_windows(scif_epd_t epd) -{ - struct list_head *item, *tmp; - struct scif_window *window; - struct scif_endpt *ep = (struct scif_endpt *)epd; - struct list_head *head = &ep->rma_info.reg_list; - int err = 0; - - mutex_lock(&ep->rma_info.rma_lock); -retry: - item = NULL; - tmp = NULL; - list_for_each_safe(item, tmp, head) { - window = list_entry(item, struct scif_window, list); - ep->rma_info.async_list_del = 0; - err = scif_unregister_window(window); - if (err) - dev_err(scif_info.mdev.this_device, - "%s %d err %d\n", - __func__, __LINE__, err); - /* - * Need to restart list traversal if there has been - * an asynchronous list entry deletion. - */ - if (READ_ONCE(ep->rma_info.async_list_del)) - goto retry; - } - mutex_unlock(&ep->rma_info.rma_lock); - if (!list_empty(&ep->rma_info.mmn_list)) { - spin_lock(&scif_info.rmalock); - list_add_tail(&ep->mmu_list, &scif_info.mmu_notif_cleanup); - spin_unlock(&scif_info.rmalock); - schedule_work(&scif_info.mmu_notif_work); - } - return err; -} diff --git a/drivers/misc/mic/scif/scif_rma_list.h b/drivers/misc/mic/scif/scif_rma_list.h deleted file mode 100644 index 0f8e0ed65614..000000000000 --- a/drivers/misc/mic/scif/scif_rma_list.h +++ /dev/null @@ -1,48 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2015 Intel Corporation. - * - * Intel SCIF driver. - */ -#ifndef SCIF_RMA_LIST_H -#define SCIF_RMA_LIST_H - -/* - * struct scif_rma_req - Self Registration list RMA Request query - * - * @out_window - Returns the window if found - * @offset: Starting offset - * @nr_bytes: number of bytes - * @prot: protection requested i.e. read or write or both - * @type: Specify single, partial or multiple windows - * @head: Head of list on which to search - * @va_for_temp: VA for searching temporary cached windows - */ -struct scif_rma_req { - struct scif_window **out_window; - union { - s64 offset; - unsigned long va_for_temp; - }; - size_t nr_bytes; - int prot; - enum scif_window_type type; - struct list_head *head; -}; - -/* Insert */ -void scif_insert_window(struct scif_window *window, struct list_head *head); -void scif_insert_tcw(struct scif_window *window, - struct list_head *head); -/* Query */ -int scif_query_window(struct scif_rma_req *request); -int scif_query_tcw(struct scif_endpt *ep, struct scif_rma_req *request); -/* Called from close to unregister all self windows */ -int scif_unregister_all_windows(scif_epd_t epd); -void scif_unmap_all_windows(scif_epd_t epd); -/* Traverse list and unregister */ -int scif_rma_list_unregister(struct scif_window *window, s64 offset, - int nr_pages); -#endif /* SCIF_RMA_LIST_H */ diff --git a/drivers/misc/mic/vop/Makefile b/drivers/misc/mic/vop/Makefile deleted file mode 100644 index 51b9b0022786..000000000000 --- a/drivers/misc/mic/vop/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile - Intel MIC Linux driver. -# Copyright(c) 2016, Intel Corporation. -# -obj-$(CONFIG_VOP) := vop.o - -vop-objs += vop_main.o -vop-objs += vop_debugfs.o -vop-objs += vop_vringh.o diff --git a/drivers/misc/mic/vop/vop_debugfs.c b/drivers/misc/mic/vop/vop_debugfs.c deleted file mode 100644 index 9d4f175f4dd1..000000000000 --- a/drivers/misc/mic/vop/vop_debugfs.c +++ /dev/null @@ -1,184 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2016 Intel Corporation. - * - * Intel Virtio Over PCIe (VOP) driver. - */ -#include <linux/debugfs.h> -#include <linux/seq_file.h> - -#include "vop_main.h" - -static int vop_dp_show(struct seq_file *s, void *pos) -{ - struct mic_device_desc *d; - struct mic_device_ctrl *dc; - struct mic_vqconfig *vqconfig; - __u32 *features; - __u8 *config; - struct vop_info *vi = s->private; - struct vop_device *vpdev = vi->vpdev; - struct mic_bootparam *bootparam = vpdev->hw_ops->get_dp(vpdev); - int j, k; - - seq_printf(s, "Bootparam: magic 0x%x\n", - bootparam->magic); - seq_printf(s, "Bootparam: h2c_config_db %d\n", - bootparam->h2c_config_db); - seq_printf(s, "Bootparam: node_id %d\n", - bootparam->node_id); - seq_printf(s, "Bootparam: c2h_scif_db %d\n", - bootparam->c2h_scif_db); - seq_printf(s, "Bootparam: h2c_scif_db %d\n", - bootparam->h2c_scif_db); - seq_printf(s, "Bootparam: scif_host_dma_addr 0x%llx\n", - bootparam->scif_host_dma_addr); - seq_printf(s, "Bootparam: scif_card_dma_addr 0x%llx\n", - bootparam->scif_card_dma_addr); - - for (j = sizeof(*bootparam); - j < MIC_DP_SIZE; j += mic_total_desc_size(d)) { - d = (void *)bootparam + j; - dc = (void *)d + mic_aligned_desc_size(d); - - /* end of list */ - if (d->type == 0) - break; - - if (d->type == -1) - continue; - - seq_printf(s, "Type %d ", d->type); - seq_printf(s, "Num VQ %d ", d->num_vq); - seq_printf(s, "Feature Len %d\n", d->feature_len); - seq_printf(s, "Config Len %d ", d->config_len); - seq_printf(s, "Shutdown Status %d\n", d->status); - - for (k = 0; k < d->num_vq; k++) { - vqconfig = mic_vq_config(d) + k; - seq_printf(s, "vqconfig[%d]: ", k); - seq_printf(s, "address 0x%llx ", - vqconfig->address); - seq_printf(s, "num %d ", vqconfig->num); - seq_printf(s, "used address 0x%llx\n", - vqconfig->used_address); - } - - features = (__u32 *)mic_vq_features(d); - seq_printf(s, "Features: Host 0x%x ", features[0]); - seq_printf(s, "Guest 0x%x\n", features[1]); - - config = mic_vq_configspace(d); - for (k = 0; k < d->config_len; k++) - seq_printf(s, "config[%d]=%d\n", k, config[k]); - - seq_puts(s, "Device control:\n"); - seq_printf(s, "Config Change %d ", dc->config_change); - seq_printf(s, "Vdev reset %d\n", dc->vdev_reset); - seq_printf(s, "Guest Ack %d ", dc->guest_ack); - seq_printf(s, "Host ack %d\n", dc->host_ack); - seq_printf(s, "Used address updated %d ", - dc->used_address_updated); - seq_printf(s, "Vdev 0x%llx\n", dc->vdev); - seq_printf(s, "c2h doorbell %d ", dc->c2h_vdev_db); - seq_printf(s, "h2c doorbell %d\n", dc->h2c_vdev_db); - } - schedule_work(&vi->hotplug_work); - return 0; -} - -DEFINE_SHOW_ATTRIBUTE(vop_dp); - -static int vop_vdev_info_show(struct seq_file *s, void *unused) -{ - struct vop_info *vi = s->private; - struct list_head *pos, *tmp; - struct vop_vdev *vdev; - int i, j; - - mutex_lock(&vi->vop_mutex); - list_for_each_safe(pos, tmp, &vi->vdev_list) { - vdev = list_entry(pos, struct vop_vdev, list); - seq_printf(s, "VDEV type %d state %s in %ld out %ld in_dma %ld out_dma %ld\n", - vdev->virtio_id, - vop_vdevup(vdev) ? "UP" : "DOWN", - vdev->in_bytes, - vdev->out_bytes, - vdev->in_bytes_dma, - vdev->out_bytes_dma); - for (i = 0; i < MIC_MAX_VRINGS; i++) { - struct vring_desc *desc; - struct vring_avail *avail; - struct vring_used *used; - struct vop_vringh *vvr = &vdev->vvr[i]; - struct vringh *vrh = &vvr->vrh; - int num = vrh->vring.num; - - if (!num) - continue; - desc = vrh->vring.desc; - seq_printf(s, "vring i %d avail_idx %d", - i, vvr->vring.info->avail_idx & (num - 1)); - seq_printf(s, " vring i %d avail_idx %d\n", - i, vvr->vring.info->avail_idx); - seq_printf(s, "vrh i %d weak_barriers %d", - i, vrh->weak_barriers); - seq_printf(s, " last_avail_idx %d last_used_idx %d", - vrh->last_avail_idx, vrh->last_used_idx); - seq_printf(s, " completed %d\n", vrh->completed); - for (j = 0; j < num; j++) { - seq_printf(s, "desc[%d] addr 0x%llx len %d", - j, desc->addr, desc->len); - seq_printf(s, " flags 0x%x next %d\n", - desc->flags, desc->next); - desc++; - } - avail = vrh->vring.avail; - seq_printf(s, "avail flags 0x%x idx %d\n", - vringh16_to_cpu(vrh, avail->flags), - vringh16_to_cpu(vrh, - avail->idx) & (num - 1)); - seq_printf(s, "avail flags 0x%x idx %d\n", - vringh16_to_cpu(vrh, avail->flags), - vringh16_to_cpu(vrh, avail->idx)); - for (j = 0; j < num; j++) - seq_printf(s, "avail ring[%d] %d\n", - j, avail->ring[j]); - used = vrh->vring.used; - seq_printf(s, "used flags 0x%x idx %d\n", - vringh16_to_cpu(vrh, used->flags), - vringh16_to_cpu(vrh, used->idx) & (num - 1)); - seq_printf(s, "used flags 0x%x idx %d\n", - vringh16_to_cpu(vrh, used->flags), - vringh16_to_cpu(vrh, used->idx)); - for (j = 0; j < num; j++) - seq_printf(s, "used ring[%d] id %d len %d\n", - j, vringh32_to_cpu(vrh, - used->ring[j].id), - vringh32_to_cpu(vrh, - used->ring[j].len)); - } - } - mutex_unlock(&vi->vop_mutex); - - return 0; -} - -DEFINE_SHOW_ATTRIBUTE(vop_vdev_info); - -void vop_init_debugfs(struct vop_info *vi) -{ - char name[16]; - - snprintf(name, sizeof(name), "%s%d", KBUILD_MODNAME, vi->vpdev->dnode); - vi->dbg = debugfs_create_dir(name, NULL); - debugfs_create_file("dp", 0444, vi->dbg, vi, &vop_dp_fops); - debugfs_create_file("vdev_info", 0444, vi->dbg, vi, &vop_vdev_info_fops); -} - -void vop_exit_debugfs(struct vop_info *vi) -{ - debugfs_remove_recursive(vi->dbg); -} diff --git a/drivers/misc/mic/vop/vop_main.c b/drivers/misc/mic/vop/vop_main.c deleted file mode 100644 index 714b94f42d38..000000000000 --- a/drivers/misc/mic/vop/vop_main.c +++ /dev/null @@ -1,784 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2016 Intel Corporation. - * - * Adapted from: - * - * virtio for kvm on s390 - * - * Copyright IBM Corp. 2008 - * - * Author(s): Christian Borntraeger <borntraeger@de.ibm.com> - * - * Intel Virtio Over PCIe (VOP) driver. - */ -#include <linux/delay.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/dma-mapping.h> -#include <linux/io-64-nonatomic-lo-hi.h> - -#include "vop_main.h" - -#define VOP_MAX_VRINGS 4 - -/* - * _vop_vdev - Allocated per virtio device instance injected by the peer. - * - * @vdev: Virtio device - * @desc: Virtio device page descriptor - * @dc: Virtio device control - * @vpdev: VOP device which is the parent for this virtio device - * @vr: Buffer for accessing the VRING - * @used_virt: Virtual address of used ring - * @used: DMA address of used ring - * @used_size: Size of the used buffer - * @reset_done: Track whether VOP reset is complete - * @virtio_cookie: Cookie returned upon requesting a interrupt - * @c2h_vdev_db: The doorbell used by the guest to interrupt the host - * @h2c_vdev_db: The doorbell used by the host to interrupt the guest - * @dnode: The destination node - */ -struct _vop_vdev { - struct virtio_device vdev; - struct mic_device_desc __iomem *desc; - struct mic_device_ctrl __iomem *dc; - struct vop_device *vpdev; - void __iomem *vr[VOP_MAX_VRINGS]; - void *used_virt[VOP_MAX_VRINGS]; - dma_addr_t used[VOP_MAX_VRINGS]; - int used_size[VOP_MAX_VRINGS]; - struct completion reset_done; - struct mic_irq *virtio_cookie; - int c2h_vdev_db; - int h2c_vdev_db; - int dnode; -}; - -#define to_vopvdev(vd) container_of(vd, struct _vop_vdev, vdev) - -#define _vop_aligned_desc_size(d) __mic_align(_vop_desc_size(d), 8) - -/* Helper API to obtain the parent of the virtio device */ -static inline struct device *_vop_dev(struct _vop_vdev *vdev) -{ - return vdev->vdev.dev.parent; -} - -static inline unsigned _vop_desc_size(struct mic_device_desc __iomem *desc) -{ - return sizeof(*desc) - + ioread8(&desc->num_vq) * sizeof(struct mic_vqconfig) - + ioread8(&desc->feature_len) * 2 - + ioread8(&desc->config_len); -} - -static inline struct mic_vqconfig __iomem * -_vop_vq_config(struct mic_device_desc __iomem *desc) -{ - return (struct mic_vqconfig __iomem *)(desc + 1); -} - -static inline u8 __iomem * -_vop_vq_features(struct mic_device_desc __iomem *desc) -{ - return (u8 __iomem *)(_vop_vq_config(desc) + ioread8(&desc->num_vq)); -} - -static inline u8 __iomem * -_vop_vq_configspace(struct mic_device_desc __iomem *desc) -{ - return _vop_vq_features(desc) + ioread8(&desc->feature_len) * 2; -} - -static inline unsigned -_vop_total_desc_size(struct mic_device_desc __iomem *desc) -{ - return _vop_aligned_desc_size(desc) + sizeof(struct mic_device_ctrl); -} - -/* This gets the device's feature bits. */ -static u64 vop_get_features(struct virtio_device *vdev) -{ - unsigned int i, bits; - u64 features = 0; - struct mic_device_desc __iomem *desc = to_vopvdev(vdev)->desc; - u8 __iomem *in_features = _vop_vq_features(desc); - int feature_len = ioread8(&desc->feature_len); - - bits = min_t(unsigned, feature_len, sizeof(vdev->features)) * 8; - for (i = 0; i < bits; i++) - if (ioread8(&in_features[i / 8]) & (BIT(i % 8))) - features |= BIT_ULL(i); - - return features; -} - -static void vop_transport_features(struct virtio_device *vdev) -{ - /* - * Packed ring isn't enabled on virtio_vop for now, - * because virtio_vop uses vring_new_virtqueue() which - * creates virtio rings on preallocated memory. - */ - __virtio_clear_bit(vdev, VIRTIO_F_RING_PACKED); - __virtio_set_bit(vdev, VIRTIO_F_ACCESS_PLATFORM); -} - -static int vop_finalize_features(struct virtio_device *vdev) -{ - unsigned int i, bits; - struct mic_device_desc __iomem *desc = to_vopvdev(vdev)->desc; - u8 feature_len = ioread8(&desc->feature_len); - /* Second half of bitmap is features we accept. */ - u8 __iomem *out_features = - _vop_vq_features(desc) + feature_len; - - /* Give virtio_ring a chance to accept features. */ - vring_transport_features(vdev); - - /* Give virtio_vop a chance to accept features. */ - vop_transport_features(vdev); - - memset_io(out_features, 0, feature_len); - bits = min_t(unsigned, feature_len, - sizeof(vdev->features)) * 8; - for (i = 0; i < bits; i++) { - if (__virtio_test_bit(vdev, i)) - iowrite8(ioread8(&out_features[i / 8]) | (1 << (i % 8)), - &out_features[i / 8]); - } - return 0; -} - -/* - * Reading and writing elements in config space - */ -static void vop_get(struct virtio_device *vdev, unsigned int offset, - void *buf, unsigned len) -{ - struct mic_device_desc __iomem *desc = to_vopvdev(vdev)->desc; - - if (offset + len > ioread8(&desc->config_len)) - return; - memcpy_fromio(buf, _vop_vq_configspace(desc) + offset, len); -} - -static void vop_set(struct virtio_device *vdev, unsigned int offset, - const void *buf, unsigned len) -{ - struct mic_device_desc __iomem *desc = to_vopvdev(vdev)->desc; - - if (offset + len > ioread8(&desc->config_len)) - return; - memcpy_toio(_vop_vq_configspace(desc) + offset, buf, len); -} - -/* - * The operations to get and set the status word just access the status - * field of the device descriptor. set_status also interrupts the host - * to tell about status changes. - */ -static u8 vop_get_status(struct virtio_device *vdev) -{ - return ioread8(&to_vopvdev(vdev)->desc->status); -} - -static void vop_set_status(struct virtio_device *dev, u8 status) -{ - struct _vop_vdev *vdev = to_vopvdev(dev); - struct vop_device *vpdev = vdev->vpdev; - - if (!status) - return; - iowrite8(status, &vdev->desc->status); - vpdev->hw_ops->send_intr(vpdev, vdev->c2h_vdev_db); -} - -/* Inform host on a virtio device reset and wait for ack from host */ -static void vop_reset_inform_host(struct virtio_device *dev) -{ - struct _vop_vdev *vdev = to_vopvdev(dev); - struct mic_device_ctrl __iomem *dc = vdev->dc; - struct vop_device *vpdev = vdev->vpdev; - int retry; - - iowrite8(0, &dc->host_ack); - iowrite8(1, &dc->vdev_reset); - vpdev->hw_ops->send_intr(vpdev, vdev->c2h_vdev_db); - - /* Wait till host completes all card accesses and acks the reset */ - for (retry = 100; retry--;) { - if (ioread8(&dc->host_ack)) - break; - msleep(100); - } - - dev_dbg(_vop_dev(vdev), "%s: retry: %d\n", __func__, retry); - - /* Reset status to 0 in case we timed out */ - iowrite8(0, &vdev->desc->status); -} - -static void vop_reset(struct virtio_device *dev) -{ - struct _vop_vdev *vdev = to_vopvdev(dev); - - dev_dbg(_vop_dev(vdev), "%s: virtio id %d\n", - __func__, dev->id.device); - - vop_reset_inform_host(dev); - complete_all(&vdev->reset_done); -} - -/* - * The virtio_ring code calls this API when it wants to notify the Host. - */ -static bool vop_notify(struct virtqueue *vq) -{ - struct _vop_vdev *vdev = vq->priv; - struct vop_device *vpdev = vdev->vpdev; - - vpdev->hw_ops->send_intr(vpdev, vdev->c2h_vdev_db); - return true; -} - -static void vop_del_vq(struct virtqueue *vq, int n) -{ - struct _vop_vdev *vdev = to_vopvdev(vq->vdev); - struct vop_device *vpdev = vdev->vpdev; - - dma_unmap_single(&vpdev->dev, vdev->used[n], - vdev->used_size[n], DMA_BIDIRECTIONAL); - free_pages((unsigned long)vdev->used_virt[n], - get_order(vdev->used_size[n])); - vring_del_virtqueue(vq); - vpdev->hw_ops->unmap(vpdev, vdev->vr[n]); - vdev->vr[n] = NULL; -} - -static void vop_del_vqs(struct virtio_device *dev) -{ - struct _vop_vdev *vdev = to_vopvdev(dev); - struct virtqueue *vq, *n; - int idx = 0; - - dev_dbg(_vop_dev(vdev), "%s\n", __func__); - - list_for_each_entry_safe(vq, n, &dev->vqs, list) - vop_del_vq(vq, idx++); -} - -static struct virtqueue *vop_new_virtqueue(unsigned int index, - unsigned int num, - struct virtio_device *vdev, - bool context, - void *pages, - bool (*notify)(struct virtqueue *vq), - void (*callback)(struct virtqueue *vq), - const char *name, - void *used) -{ - bool weak_barriers = false; - struct vring vring; - - vring_init(&vring, num, pages, MIC_VIRTIO_RING_ALIGN); - vring.used = used; - - return __vring_new_virtqueue(index, vring, vdev, weak_barriers, context, - notify, callback, name); -} - -/* - * This routine will assign vring's allocated in host/io memory. Code in - * virtio_ring.c however continues to access this io memory as if it were local - * memory without io accessors. - */ -static struct virtqueue *vop_find_vq(struct virtio_device *dev, - unsigned index, - void (*callback)(struct virtqueue *vq), - const char *name, bool ctx) -{ - struct _vop_vdev *vdev = to_vopvdev(dev); - struct vop_device *vpdev = vdev->vpdev; - struct mic_vqconfig __iomem *vqconfig; - struct mic_vqconfig config; - struct virtqueue *vq; - void __iomem *va; - struct _mic_vring_info __iomem *info; - void *used; - int vr_size, _vr_size, err, magic; - u8 type = ioread8(&vdev->desc->type); - - if (index >= ioread8(&vdev->desc->num_vq)) - return ERR_PTR(-ENOENT); - - if (!name) - return ERR_PTR(-ENOENT); - - /* First assign the vring's allocated in host memory */ - vqconfig = _vop_vq_config(vdev->desc) + index; - memcpy_fromio(&config, vqconfig, sizeof(config)); - _vr_size = round_up(vring_size(le16_to_cpu(config.num), MIC_VIRTIO_RING_ALIGN), 4); - vr_size = PAGE_ALIGN(_vr_size + sizeof(struct _mic_vring_info)); - va = vpdev->hw_ops->remap(vpdev, le64_to_cpu(config.address), vr_size); - if (!va) - return ERR_PTR(-ENOMEM); - vdev->vr[index] = va; - memset_io(va, 0x0, _vr_size); - - info = va + _vr_size; - magic = ioread32(&info->magic); - - if (WARN(magic != MIC_MAGIC + type + index, "magic mismatch")) { - err = -EIO; - goto unmap; - } - - vdev->used_size[index] = PAGE_ALIGN(sizeof(__u16) * 3 + - sizeof(struct vring_used_elem) * - le16_to_cpu(config.num)); - used = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, - get_order(vdev->used_size[index])); - vdev->used_virt[index] = used; - if (!used) { - err = -ENOMEM; - dev_err(_vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, err); - goto unmap; - } - - vq = vop_new_virtqueue(index, le16_to_cpu(config.num), dev, ctx, - (void __force *)va, vop_notify, callback, - name, used); - if (!vq) { - err = -ENOMEM; - goto free_used; - } - - vdev->used[index] = dma_map_single(&vpdev->dev, used, - vdev->used_size[index], - DMA_BIDIRECTIONAL); - if (dma_mapping_error(&vpdev->dev, vdev->used[index])) { - err = -ENOMEM; - dev_err(_vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, err); - goto del_vq; - } - writeq(vdev->used[index], &vqconfig->used_address); - - vq->priv = vdev; - return vq; -del_vq: - vring_del_virtqueue(vq); -free_used: - free_pages((unsigned long)used, - get_order(vdev->used_size[index])); -unmap: - vpdev->hw_ops->unmap(vpdev, vdev->vr[index]); - return ERR_PTR(err); -} - -static int vop_find_vqs(struct virtio_device *dev, unsigned nvqs, - struct virtqueue *vqs[], - vq_callback_t *callbacks[], - const char * const names[], const bool *ctx, - struct irq_affinity *desc) -{ - struct _vop_vdev *vdev = to_vopvdev(dev); - struct vop_device *vpdev = vdev->vpdev; - struct mic_device_ctrl __iomem *dc = vdev->dc; - int i, err, retry, queue_idx = 0; - - /* We must have this many virtqueues. */ - if (nvqs > ioread8(&vdev->desc->num_vq)) - return -ENOENT; - - for (i = 0; i < nvqs; ++i) { - if (!names[i]) { - vqs[i] = NULL; - continue; - } - - dev_dbg(_vop_dev(vdev), "%s: %d: %s\n", - __func__, i, names[i]); - vqs[i] = vop_find_vq(dev, queue_idx++, callbacks[i], names[i], - ctx ? ctx[i] : false); - if (IS_ERR(vqs[i])) { - err = PTR_ERR(vqs[i]); - goto error; - } - } - - iowrite8(1, &dc->used_address_updated); - /* - * Send an interrupt to the host to inform it that used - * rings have been re-assigned. - */ - vpdev->hw_ops->send_intr(vpdev, vdev->c2h_vdev_db); - for (retry = 100; --retry;) { - if (!ioread8(&dc->used_address_updated)) - break; - msleep(100); - } - - dev_dbg(_vop_dev(vdev), "%s: retry: %d\n", __func__, retry); - if (!retry) { - err = -ENODEV; - goto error; - } - - return 0; -error: - vop_del_vqs(dev); - return err; -} - -/* - * The config ops structure as defined by virtio config - */ -static const struct virtio_config_ops vop_vq_config_ops = { - .get_features = vop_get_features, - .finalize_features = vop_finalize_features, - .get = vop_get, - .set = vop_set, - .get_status = vop_get_status, - .set_status = vop_set_status, - .reset = vop_reset, - .find_vqs = vop_find_vqs, - .del_vqs = vop_del_vqs, -}; - -static irqreturn_t vop_virtio_intr_handler(int irq, void *data) -{ - struct _vop_vdev *vdev = data; - struct vop_device *vpdev = vdev->vpdev; - struct virtqueue *vq; - - vpdev->hw_ops->ack_interrupt(vpdev, vdev->h2c_vdev_db); - list_for_each_entry(vq, &vdev->vdev.vqs, list) - vring_interrupt(0, vq); - - return IRQ_HANDLED; -} - -static void vop_virtio_release_dev(struct device *_d) -{ - struct virtio_device *vdev = - container_of(_d, struct virtio_device, dev); - struct _vop_vdev *vop_vdev = - container_of(vdev, struct _vop_vdev, vdev); - - kfree(vop_vdev); -} - -/* - * adds a new device and register it with virtio - * appropriate drivers are loaded by the device model - */ -static int _vop_add_device(struct mic_device_desc __iomem *d, - unsigned int offset, struct vop_device *vpdev, - int dnode) -{ - struct _vop_vdev *vdev, *reg_dev = NULL; - int ret; - u8 type = ioread8(&d->type); - - vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); - if (!vdev) - return -ENOMEM; - - vdev->vpdev = vpdev; - vdev->vdev.dev.parent = &vpdev->dev; - vdev->vdev.dev.release = vop_virtio_release_dev; - vdev->vdev.id.device = type; - vdev->vdev.config = &vop_vq_config_ops; - vdev->desc = d; - vdev->dc = (void __iomem *)d + _vop_aligned_desc_size(d); - vdev->dnode = dnode; - vdev->vdev.priv = (void *)(unsigned long)dnode; - init_completion(&vdev->reset_done); - - vdev->h2c_vdev_db = vpdev->hw_ops->next_db(vpdev); - vdev->virtio_cookie = vpdev->hw_ops->request_irq(vpdev, - vop_virtio_intr_handler, "virtio intr", - vdev, vdev->h2c_vdev_db); - if (IS_ERR(vdev->virtio_cookie)) { - ret = PTR_ERR(vdev->virtio_cookie); - goto kfree; - } - iowrite8((u8)vdev->h2c_vdev_db, &vdev->dc->h2c_vdev_db); - vdev->c2h_vdev_db = ioread8(&vdev->dc->c2h_vdev_db); - - ret = register_virtio_device(&vdev->vdev); - reg_dev = vdev; - if (ret) { - dev_err(_vop_dev(vdev), - "Failed to register vop device %u type %u\n", - offset, type); - goto free_irq; - } - writeq((unsigned long)vdev, &vdev->dc->vdev); - dev_dbg(_vop_dev(vdev), "%s: registered vop device %u type %u vdev %p\n", - __func__, offset, type, vdev); - - return 0; - -free_irq: - vpdev->hw_ops->free_irq(vpdev, vdev->virtio_cookie, vdev); -kfree: - if (reg_dev) - put_device(&vdev->vdev.dev); - else - kfree(vdev); - return ret; -} - -/* - * match for a vop device with a specific desc pointer - */ -static int vop_match_desc(struct device *dev, void *data) -{ - struct virtio_device *_dev = dev_to_virtio(dev); - struct _vop_vdev *vdev = to_vopvdev(_dev); - - return vdev->desc == (void __iomem *)data; -} - -static struct _vop_vdev *vop_dc_to_vdev(struct mic_device_ctrl __iomem *dc) -{ - return (struct _vop_vdev *)(unsigned long)readq(&dc->vdev); -} - -static void _vop_handle_config_change(struct mic_device_desc __iomem *d, - unsigned int offset, - struct vop_device *vpdev) -{ - struct mic_device_ctrl __iomem *dc - = (void __iomem *)d + _vop_aligned_desc_size(d); - struct _vop_vdev *vdev = vop_dc_to_vdev(dc); - - if (ioread8(&dc->config_change) != MIC_VIRTIO_PARAM_CONFIG_CHANGED) - return; - - dev_dbg(&vpdev->dev, "%s %d\n", __func__, __LINE__); - virtio_config_changed(&vdev->vdev); - iowrite8(1, &dc->guest_ack); -} - -/* - * removes a virtio device if a hot remove event has been - * requested by the host. - */ -static int _vop_remove_device(struct mic_device_desc __iomem *d, - unsigned int offset, struct vop_device *vpdev) -{ - struct mic_device_ctrl __iomem *dc - = (void __iomem *)d + _vop_aligned_desc_size(d); - struct _vop_vdev *vdev = vop_dc_to_vdev(dc); - u8 status; - int ret = -1; - - if (ioread8(&dc->config_change) == MIC_VIRTIO_PARAM_DEV_REMOVE) { - struct device *dev = get_device(&vdev->vdev.dev); - - dev_dbg(&vpdev->dev, - "%s %d config_change %d type %d vdev %p\n", - __func__, __LINE__, - ioread8(&dc->config_change), ioread8(&d->type), vdev); - status = ioread8(&d->status); - reinit_completion(&vdev->reset_done); - unregister_virtio_device(&vdev->vdev); - vpdev->hw_ops->free_irq(vpdev, vdev->virtio_cookie, vdev); - iowrite8(-1, &dc->h2c_vdev_db); - if (status & VIRTIO_CONFIG_S_DRIVER_OK) - wait_for_completion(&vdev->reset_done); - put_device(dev); - iowrite8(1, &dc->guest_ack); - dev_dbg(&vpdev->dev, "%s %d guest_ack %d\n", - __func__, __LINE__, ioread8(&dc->guest_ack)); - iowrite8(-1, &d->type); - ret = 0; - } - return ret; -} - -#define REMOVE_DEVICES true - -static void _vop_scan_devices(void __iomem *dp, struct vop_device *vpdev, - bool remove, int dnode) -{ - s8 type; - unsigned int i; - struct mic_device_desc __iomem *d; - struct mic_device_ctrl __iomem *dc; - struct device *dev; - - for (i = sizeof(struct mic_bootparam); - i < MIC_DP_SIZE; i += _vop_total_desc_size(d)) { - d = dp + i; - dc = (void __iomem *)d + _vop_aligned_desc_size(d); - /* - * This read barrier is paired with the corresponding write - * barrier on the host which is inserted before adding or - * removing a virtio device descriptor, by updating the type. - */ - rmb(); - type = ioread8(&d->type); - - /* end of list */ - if (type == 0) - break; - - if (type == -1) - continue; - - /* device already exists */ - dev = device_find_child(&vpdev->dev, (void __force *)d, - vop_match_desc); - if (dev) { - if (remove) - iowrite8(MIC_VIRTIO_PARAM_DEV_REMOVE, - &dc->config_change); - put_device(dev); - _vop_handle_config_change(d, i, vpdev); - _vop_remove_device(d, i, vpdev); - if (remove) { - iowrite8(0, &dc->config_change); - iowrite8(0, &dc->guest_ack); - } - continue; - } - - /* new device */ - dev_dbg(&vpdev->dev, "%s %d Adding new virtio device %p\n", - __func__, __LINE__, d); - if (!remove) - _vop_add_device(d, i, vpdev, dnode); - } -} - -static void vop_scan_devices(struct vop_info *vi, - struct vop_device *vpdev, bool remove) -{ - void __iomem *dp = vpdev->hw_ops->get_remote_dp(vpdev); - - if (!dp) - return; - mutex_lock(&vi->vop_mutex); - _vop_scan_devices(dp, vpdev, remove, vpdev->dnode); - mutex_unlock(&vi->vop_mutex); -} - -/* - * vop_hotplug_device tries to find changes in the device page. - */ -static void vop_hotplug_devices(struct work_struct *work) -{ - struct vop_info *vi = container_of(work, struct vop_info, - hotplug_work); - - vop_scan_devices(vi, vi->vpdev, !REMOVE_DEVICES); -} - -/* - * Interrupt handler for hot plug/config changes etc. - */ -static irqreturn_t vop_extint_handler(int irq, void *data) -{ - struct vop_info *vi = data; - struct mic_bootparam __iomem *bp; - struct vop_device *vpdev = vi->vpdev; - - bp = vpdev->hw_ops->get_remote_dp(vpdev); - dev_dbg(&vpdev->dev, "%s %d hotplug work\n", - __func__, __LINE__); - vpdev->hw_ops->ack_interrupt(vpdev, ioread8(&bp->h2c_config_db)); - schedule_work(&vi->hotplug_work); - return IRQ_HANDLED; -} - -static int vop_driver_probe(struct vop_device *vpdev) -{ - struct vop_info *vi; - int rc; - - vi = kzalloc(sizeof(*vi), GFP_KERNEL); - if (!vi) { - rc = -ENOMEM; - goto exit; - } - dev_set_drvdata(&vpdev->dev, vi); - vi->vpdev = vpdev; - - mutex_init(&vi->vop_mutex); - INIT_WORK(&vi->hotplug_work, vop_hotplug_devices); - if (vpdev->dnode) { - rc = vop_host_init(vi); - if (rc < 0) - goto free; - } else { - struct mic_bootparam __iomem *bootparam; - - vop_scan_devices(vi, vpdev, !REMOVE_DEVICES); - - vi->h2c_config_db = vpdev->hw_ops->next_db(vpdev); - vi->cookie = vpdev->hw_ops->request_irq(vpdev, - vop_extint_handler, - "virtio_config_intr", - vi, vi->h2c_config_db); - if (IS_ERR(vi->cookie)) { - rc = PTR_ERR(vi->cookie); - goto free; - } - bootparam = vpdev->hw_ops->get_remote_dp(vpdev); - iowrite8(vi->h2c_config_db, &bootparam->h2c_config_db); - } - vop_init_debugfs(vi); - return 0; -free: - kfree(vi); -exit: - return rc; -} - -static void vop_driver_remove(struct vop_device *vpdev) -{ - struct vop_info *vi = dev_get_drvdata(&vpdev->dev); - - if (vpdev->dnode) { - vop_host_uninit(vi); - } else { - struct mic_bootparam __iomem *bootparam = - vpdev->hw_ops->get_remote_dp(vpdev); - if (bootparam) - iowrite8(-1, &bootparam->h2c_config_db); - vpdev->hw_ops->free_irq(vpdev, vi->cookie, vi); - flush_work(&vi->hotplug_work); - vop_scan_devices(vi, vpdev, REMOVE_DEVICES); - } - vop_exit_debugfs(vi); - kfree(vi); -} - -static const struct vop_device_id id_table[] = { - { VOP_DEV_TRNSP, VOP_DEV_ANY_ID }, - { 0 }, -}; - -static struct vop_driver vop_driver = { - .driver.name = KBUILD_MODNAME, - .driver.owner = THIS_MODULE, - .id_table = id_table, - .probe = vop_driver_probe, - .remove = vop_driver_remove, -}; - -module_vop_driver(vop_driver); - -MODULE_DEVICE_TABLE(mbus, id_table); -MODULE_AUTHOR("Intel Corporation"); -MODULE_DESCRIPTION("Intel(R) Virtio Over PCIe (VOP) driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/mic/vop/vop_main.h b/drivers/misc/mic/vop/vop_main.h deleted file mode 100644 index 2451d9218137..000000000000 --- a/drivers/misc/mic/vop/vop_main.h +++ /dev/null @@ -1,158 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2016 Intel Corporation. - * - * Intel Virtio Over PCIe (VOP) driver. - */ -#ifndef _VOP_MAIN_H_ -#define _VOP_MAIN_H_ - -#include <linux/vringh.h> -#include <linux/virtio_config.h> -#include <linux/virtio.h> -#include <linux/miscdevice.h> - -#include <linux/mic_common.h> -#include "../common/mic_dev.h" - -#include "../bus/vop_bus.h" - -/* - * Note on endianness. - * 1. Host can be both BE or LE - * 2. Guest/card is LE. Host uses le_to_cpu to access desc/avail - * rings and ioreadXX/iowriteXX to access used ring. - * 3. Device page exposed by host to guest contains LE values. Guest - * accesses these using ioreadXX/iowriteXX etc. This way in general we - * obey the virtio spec according to which guest works with native - * endianness and host is aware of guest endianness and does all - * required endianness conversion. - * 4. Data provided from user space to guest (in ADD_DEVICE and - * CONFIG_CHANGE ioctl's) is not interpreted by the driver and should be - * in guest endianness. - */ - -/* - * vop_info - Allocated per invocation of VOP probe - * - * @vpdev: VOP device - * @hotplug_work: Handle virtio device creation, deletion and configuration - * @cookie: Cookie received upon requesting a virtio configuration interrupt - * @h2c_config_db: The doorbell used by the peer to indicate a config change - * @vdev_list: List of "active" virtio devices injected in the peer node - * @vop_mutex: Synchronize access to the device page as well as serialize - * creation/deletion of virtio devices on the peer node - * @dp: Peer device page information - * @dbg: Debugfs entry - * @dma_ch: The DMA channel used by this transport for data transfers. - * @name: Name for this transport used in misc device creation. - * @miscdev: The misc device registered. - */ -struct vop_info { - struct vop_device *vpdev; - struct work_struct hotplug_work; - struct mic_irq *cookie; - int h2c_config_db; - struct list_head vdev_list; - struct mutex vop_mutex; - void __iomem *dp; - struct dentry *dbg; - struct dma_chan *dma_ch; - char name[16]; - struct miscdevice miscdev; -}; - -/** - * struct vop_vringh - Virtio ring host information. - * - * @vring: The VOP vring used for setting up user space mappings. - * @vrh: The host VRINGH used for accessing the card vrings. - * @riov: The VRINGH read kernel IOV. - * @wiov: The VRINGH write kernel IOV. - * @head: The VRINGH head index address passed to vringh_getdesc_kern(..). - * @vr_mutex: Mutex for synchronizing access to the VRING. - * @buf: Temporary kernel buffer used to copy in/out data - * from/to the card via DMA. - * @buf_da: dma address of buf. - * @vdev: Back pointer to VOP virtio device for vringh_notify(..). - */ -struct vop_vringh { - struct mic_vring vring; - struct vringh vrh; - struct vringh_kiov riov; - struct vringh_kiov wiov; - u16 head; - struct mutex vr_mutex; - void *buf; - dma_addr_t buf_da; - struct vop_vdev *vdev; -}; - -/** - * struct vop_vdev - Host information for a card Virtio device. - * - * @virtio_id - Virtio device id. - * @waitq - Waitqueue to allow ring3 apps to poll. - * @vpdev - pointer to VOP bus device. - * @poll_wake - Used for waking up threads blocked in poll. - * @out_bytes - Debug stats for number of bytes copied from host to card. - * @in_bytes - Debug stats for number of bytes copied from card to host. - * @out_bytes_dma - Debug stats for number of bytes copied from host to card - * using DMA. - * @in_bytes_dma - Debug stats for number of bytes copied from card to host - * using DMA. - * @tx_len_unaligned - Debug stats for number of bytes copied to the card where - * the transfer length did not have the required DMA alignment. - * @tx_dst_unaligned - Debug stats for number of bytes copied where the - * destination address on the card did not have the required DMA alignment. - * @vvr - Store per VRING data structures. - * @virtio_bh_work - Work struct used to schedule virtio bottom half handling. - * @dd - Virtio device descriptor. - * @dc - Virtio device control fields. - * @list - List of Virtio devices. - * @virtio_db - The doorbell used by the card to interrupt the host. - * @virtio_cookie - The cookie returned while requesting interrupts. - * @vi: Transport information. - * @vdev_mutex: Mutex synchronizing virtio device injection, - * removal and data transfers. - * @destroy: Track if a virtio device is being destroyed. - * @deleted: The virtio device has been deleted. - */ -struct vop_vdev { - int virtio_id; - wait_queue_head_t waitq; - struct vop_device *vpdev; - int poll_wake; - unsigned long out_bytes; - unsigned long in_bytes; - unsigned long out_bytes_dma; - unsigned long in_bytes_dma; - unsigned long tx_len_unaligned; - unsigned long tx_dst_unaligned; - unsigned long rx_dst_unaligned; - struct vop_vringh vvr[MIC_MAX_VRINGS]; - struct work_struct virtio_bh_work; - struct mic_device_desc *dd; - struct mic_device_ctrl *dc; - struct list_head list; - int virtio_db; - struct mic_irq *virtio_cookie; - struct vop_info *vi; - struct mutex vdev_mutex; - struct completion destroy; - bool deleted; -}; - -/* Helper API to check if a virtio device is running */ -static inline bool vop_vdevup(struct vop_vdev *vdev) -{ - return !!vdev->dd->status; -} - -void vop_init_debugfs(struct vop_info *vi); -void vop_exit_debugfs(struct vop_info *vi); -int vop_host_init(struct vop_info *vi); -void vop_host_uninit(struct vop_info *vi); -#endif diff --git a/drivers/misc/mic/vop/vop_vringh.c b/drivers/misc/mic/vop/vop_vringh.c deleted file mode 100644 index 7014ffe88632..000000000000 --- a/drivers/misc/mic/vop/vop_vringh.c +++ /dev/null @@ -1,1166 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2016 Intel Corporation. - * - * Intel Virtio Over PCIe (VOP) driver. - */ -#include <linux/sched.h> -#include <linux/poll.h> -#include <linux/dma-mapping.h> - -#include <linux/mic_common.h> -#include "../common/mic_dev.h" - -#include <linux/mic_ioctl.h> -#include "vop_main.h" - -/* Helper API to obtain the VOP PCIe device */ -static inline struct device *vop_dev(struct vop_vdev *vdev) -{ - return vdev->vpdev->dev.parent; -} - -/* Helper API to check if a virtio device is initialized */ -static inline int vop_vdev_inited(struct vop_vdev *vdev) -{ - if (!vdev) - return -EINVAL; - /* Device has not been created yet */ - if (!vdev->dd || !vdev->dd->type) { - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, -EINVAL); - return -EINVAL; - } - /* Device has been removed/deleted */ - if (vdev->dd->type == -1) { - dev_dbg(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, -ENODEV); - return -ENODEV; - } - return 0; -} - -static void _vop_notify(struct vringh *vrh) -{ - struct vop_vringh *vvrh = container_of(vrh, struct vop_vringh, vrh); - struct vop_vdev *vdev = vvrh->vdev; - struct vop_device *vpdev = vdev->vpdev; - s8 db = vdev->dc->h2c_vdev_db; - - if (db != -1) - vpdev->hw_ops->send_intr(vpdev, db); -} - -static void vop_virtio_init_post(struct vop_vdev *vdev) -{ - struct mic_vqconfig *vqconfig = mic_vq_config(vdev->dd); - struct vop_device *vpdev = vdev->vpdev; - int i, used_size; - - for (i = 0; i < vdev->dd->num_vq; i++) { - used_size = PAGE_ALIGN(sizeof(u16) * 3 + - sizeof(struct vring_used_elem) * - le16_to_cpu(vqconfig->num)); - if (!le64_to_cpu(vqconfig[i].used_address)) { - dev_warn(vop_dev(vdev), "used_address zero??\n"); - continue; - } - vdev->vvr[i].vrh.vring.used = - (void __force *)vpdev->hw_ops->remap( - vpdev, - le64_to_cpu(vqconfig[i].used_address), - used_size); - } - - vdev->dc->used_address_updated = 0; - - dev_info(vop_dev(vdev), "%s: device type %d LINKUP\n", - __func__, vdev->virtio_id); -} - -static inline void vop_virtio_device_reset(struct vop_vdev *vdev) -{ - int i; - - dev_dbg(vop_dev(vdev), "%s: status %d device type %d RESET\n", - __func__, vdev->dd->status, vdev->virtio_id); - - for (i = 0; i < vdev->dd->num_vq; i++) - /* - * Avoid lockdep false positive. The + 1 is for the vop - * mutex which is held in the reset devices code path. - */ - mutex_lock_nested(&vdev->vvr[i].vr_mutex, i + 1); - - /* 0 status means "reset" */ - vdev->dd->status = 0; - vdev->dc->vdev_reset = 0; - vdev->dc->host_ack = 1; - - for (i = 0; i < vdev->dd->num_vq; i++) { - struct vringh *vrh = &vdev->vvr[i].vrh; - - vdev->vvr[i].vring.info->avail_idx = 0; - vrh->completed = 0; - vrh->last_avail_idx = 0; - vrh->last_used_idx = 0; - } - - for (i = 0; i < vdev->dd->num_vq; i++) - mutex_unlock(&vdev->vvr[i].vr_mutex); -} - -static void vop_virtio_reset_devices(struct vop_info *vi) -{ - struct list_head *pos, *tmp; - struct vop_vdev *vdev; - - list_for_each_safe(pos, tmp, &vi->vdev_list) { - vdev = list_entry(pos, struct vop_vdev, list); - vop_virtio_device_reset(vdev); - vdev->poll_wake = 1; - wake_up(&vdev->waitq); - } -} - -static void vop_bh_handler(struct work_struct *work) -{ - struct vop_vdev *vdev = container_of(work, struct vop_vdev, - virtio_bh_work); - - if (vdev->dc->used_address_updated) - vop_virtio_init_post(vdev); - - if (vdev->dc->vdev_reset) - vop_virtio_device_reset(vdev); - - vdev->poll_wake = 1; - wake_up(&vdev->waitq); -} - -static irqreturn_t _vop_virtio_intr_handler(int irq, void *data) -{ - struct vop_vdev *vdev = data; - struct vop_device *vpdev = vdev->vpdev; - - vpdev->hw_ops->ack_interrupt(vpdev, vdev->virtio_db); - schedule_work(&vdev->virtio_bh_work); - return IRQ_HANDLED; -} - -static int vop_virtio_config_change(struct vop_vdev *vdev, void *argp) -{ - DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake); - int ret = 0, retry, i; - struct vop_device *vpdev = vdev->vpdev; - struct vop_info *vi = dev_get_drvdata(&vpdev->dev); - struct mic_bootparam *bootparam = vpdev->hw_ops->get_dp(vpdev); - s8 db = bootparam->h2c_config_db; - - mutex_lock(&vi->vop_mutex); - for (i = 0; i < vdev->dd->num_vq; i++) - mutex_lock_nested(&vdev->vvr[i].vr_mutex, i + 1); - - if (db == -1 || vdev->dd->type == -1) { - ret = -EIO; - goto exit; - } - - memcpy(mic_vq_configspace(vdev->dd), argp, vdev->dd->config_len); - vdev->dc->config_change = MIC_VIRTIO_PARAM_CONFIG_CHANGED; - vpdev->hw_ops->send_intr(vpdev, db); - - for (retry = 100; retry--;) { - ret = wait_event_timeout(wake, vdev->dc->guest_ack, - msecs_to_jiffies(100)); - if (ret) - break; - } - - dev_dbg(vop_dev(vdev), - "%s %d retry: %d\n", __func__, __LINE__, retry); - vdev->dc->config_change = 0; - vdev->dc->guest_ack = 0; -exit: - for (i = 0; i < vdev->dd->num_vq; i++) - mutex_unlock(&vdev->vvr[i].vr_mutex); - mutex_unlock(&vi->vop_mutex); - return ret; -} - -static int vop_copy_dp_entry(struct vop_vdev *vdev, - struct mic_device_desc *argp, __u8 *type, - struct mic_device_desc **devpage) -{ - struct vop_device *vpdev = vdev->vpdev; - struct mic_device_desc *devp; - struct mic_vqconfig *vqconfig; - int ret = 0, i; - bool slot_found = false; - - vqconfig = mic_vq_config(argp); - for (i = 0; i < argp->num_vq; i++) { - if (le16_to_cpu(vqconfig[i].num) > MIC_MAX_VRING_ENTRIES) { - ret = -EINVAL; - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, ret); - goto exit; - } - } - - /* Find the first free device page entry */ - for (i = sizeof(struct mic_bootparam); - i < MIC_DP_SIZE - mic_total_desc_size(argp); - i += mic_total_desc_size(devp)) { - devp = vpdev->hw_ops->get_dp(vpdev) + i; - if (devp->type == 0 || devp->type == -1) { - slot_found = true; - break; - } - } - if (!slot_found) { - ret = -EINVAL; - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, ret); - goto exit; - } - /* - * Save off the type before doing the memcpy. Type will be set in the - * end after completing all initialization for the new device. - */ - *type = argp->type; - argp->type = 0; - memcpy(devp, argp, mic_desc_size(argp)); - - *devpage = devp; -exit: - return ret; -} - -static void vop_init_device_ctrl(struct vop_vdev *vdev, - struct mic_device_desc *devpage) -{ - struct mic_device_ctrl *dc; - - dc = (void *)devpage + mic_aligned_desc_size(devpage); - - dc->config_change = 0; - dc->guest_ack = 0; - dc->vdev_reset = 0; - dc->host_ack = 0; - dc->used_address_updated = 0; - dc->c2h_vdev_db = -1; - dc->h2c_vdev_db = -1; - vdev->dc = dc; -} - -static int vop_virtio_add_device(struct vop_vdev *vdev, - struct mic_device_desc *argp) -{ - struct vop_info *vi = vdev->vi; - struct vop_device *vpdev = vi->vpdev; - struct mic_device_desc *dd = NULL; - struct mic_vqconfig *vqconfig; - int vr_size, i, j, ret; - u8 type = 0; - s8 db = -1; - char irqname[16]; - struct mic_bootparam *bootparam; - u16 num; - dma_addr_t vr_addr; - - bootparam = vpdev->hw_ops->get_dp(vpdev); - init_waitqueue_head(&vdev->waitq); - INIT_LIST_HEAD(&vdev->list); - vdev->vpdev = vpdev; - - ret = vop_copy_dp_entry(vdev, argp, &type, &dd); - if (ret) { - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, ret); - return ret; - } - - vop_init_device_ctrl(vdev, dd); - - vdev->dd = dd; - vdev->virtio_id = type; - vqconfig = mic_vq_config(dd); - INIT_WORK(&vdev->virtio_bh_work, vop_bh_handler); - - for (i = 0; i < dd->num_vq; i++) { - struct vop_vringh *vvr = &vdev->vvr[i]; - struct mic_vring *vr = &vdev->vvr[i].vring; - - num = le16_to_cpu(vqconfig[i].num); - mutex_init(&vvr->vr_mutex); - vr_size = PAGE_ALIGN(round_up(vring_size(num, MIC_VIRTIO_RING_ALIGN), 4) + - sizeof(struct _mic_vring_info)); - vr->va = (void *) - __get_free_pages(GFP_KERNEL | __GFP_ZERO, - get_order(vr_size)); - if (!vr->va) { - ret = -ENOMEM; - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, ret); - goto err; - } - vr->len = vr_size; - vr->info = vr->va + round_up(vring_size(num, MIC_VIRTIO_RING_ALIGN), 4); - vr->info->magic = cpu_to_le32(MIC_MAGIC + vdev->virtio_id + i); - vr_addr = dma_map_single(&vpdev->dev, vr->va, vr_size, - DMA_BIDIRECTIONAL); - if (dma_mapping_error(&vpdev->dev, vr_addr)) { - free_pages((unsigned long)vr->va, get_order(vr_size)); - ret = -ENOMEM; - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, ret); - goto err; - } - vqconfig[i].address = cpu_to_le64(vr_addr); - - vring_init(&vr->vr, num, vr->va, MIC_VIRTIO_RING_ALIGN); - ret = vringh_init_kern(&vvr->vrh, - *(u32 *)mic_vq_features(vdev->dd), - num, false, vr->vr.desc, vr->vr.avail, - vr->vr.used); - if (ret) { - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, ret); - goto err; - } - vringh_kiov_init(&vvr->riov, NULL, 0); - vringh_kiov_init(&vvr->wiov, NULL, 0); - vvr->head = USHRT_MAX; - vvr->vdev = vdev; - vvr->vrh.notify = _vop_notify; - dev_dbg(&vpdev->dev, - "%s %d index %d va %p info %p vr_size 0x%x\n", - __func__, __LINE__, i, vr->va, vr->info, vr_size); - vvr->buf = (void *)__get_free_pages(GFP_KERNEL, - get_order(VOP_INT_DMA_BUF_SIZE)); - vvr->buf_da = dma_map_single(&vpdev->dev, - vvr->buf, VOP_INT_DMA_BUF_SIZE, - DMA_BIDIRECTIONAL); - } - - snprintf(irqname, sizeof(irqname), "vop%dvirtio%d", vpdev->index, - vdev->virtio_id); - vdev->virtio_db = vpdev->hw_ops->next_db(vpdev); - vdev->virtio_cookie = vpdev->hw_ops->request_irq(vpdev, - _vop_virtio_intr_handler, irqname, vdev, - vdev->virtio_db); - if (IS_ERR(vdev->virtio_cookie)) { - ret = PTR_ERR(vdev->virtio_cookie); - dev_dbg(&vpdev->dev, "request irq failed\n"); - goto err; - } - - vdev->dc->c2h_vdev_db = vdev->virtio_db; - - /* - * Order the type update with previous stores. This write barrier - * is paired with the corresponding read barrier before the uncached - * system memory read of the type, on the card while scanning the - * device page. - */ - smp_wmb(); - dd->type = type; - argp->type = type; - - if (bootparam) { - db = bootparam->h2c_config_db; - if (db != -1) - vpdev->hw_ops->send_intr(vpdev, db); - } - dev_dbg(&vpdev->dev, "Added virtio id %d db %d\n", dd->type, db); - return 0; -err: - vqconfig = mic_vq_config(dd); - for (j = 0; j < i; j++) { - struct vop_vringh *vvr = &vdev->vvr[j]; - - dma_unmap_single(&vpdev->dev, le64_to_cpu(vqconfig[j].address), - vvr->vring.len, DMA_BIDIRECTIONAL); - free_pages((unsigned long)vvr->vring.va, - get_order(vvr->vring.len)); - } - return ret; -} - -static void vop_dev_remove(struct vop_info *pvi, struct mic_device_ctrl *devp, - struct vop_device *vpdev) -{ - struct mic_bootparam *bootparam = vpdev->hw_ops->get_dp(vpdev); - s8 db; - int ret, retry; - DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake); - - devp->config_change = MIC_VIRTIO_PARAM_DEV_REMOVE; - db = bootparam->h2c_config_db; - if (db != -1) - vpdev->hw_ops->send_intr(vpdev, db); - else - goto done; - for (retry = 15; retry--;) { - ret = wait_event_timeout(wake, devp->guest_ack, - msecs_to_jiffies(1000)); - if (ret) - break; - } -done: - devp->config_change = 0; - devp->guest_ack = 0; -} - -static void vop_virtio_del_device(struct vop_vdev *vdev) -{ - struct vop_info *vi = vdev->vi; - struct vop_device *vpdev = vdev->vpdev; - int i; - struct mic_vqconfig *vqconfig; - struct mic_bootparam *bootparam = vpdev->hw_ops->get_dp(vpdev); - - if (!bootparam) - goto skip_hot_remove; - vop_dev_remove(vi, vdev->dc, vpdev); -skip_hot_remove: - vpdev->hw_ops->free_irq(vpdev, vdev->virtio_cookie, vdev); - flush_work(&vdev->virtio_bh_work); - vqconfig = mic_vq_config(vdev->dd); - for (i = 0; i < vdev->dd->num_vq; i++) { - struct vop_vringh *vvr = &vdev->vvr[i]; - - dma_unmap_single(&vpdev->dev, - vvr->buf_da, VOP_INT_DMA_BUF_SIZE, - DMA_BIDIRECTIONAL); - free_pages((unsigned long)vvr->buf, - get_order(VOP_INT_DMA_BUF_SIZE)); - vringh_kiov_cleanup(&vvr->riov); - vringh_kiov_cleanup(&vvr->wiov); - dma_unmap_single(&vpdev->dev, le64_to_cpu(vqconfig[i].address), - vvr->vring.len, DMA_BIDIRECTIONAL); - free_pages((unsigned long)vvr->vring.va, - get_order(vvr->vring.len)); - } - /* - * Order the type update with previous stores. This write barrier - * is paired with the corresponding read barrier before the uncached - * system memory read of the type, on the card while scanning the - * device page. - */ - smp_wmb(); - vdev->dd->type = -1; -} - -/* - * vop_sync_dma - Wrapper for synchronous DMAs. - * - * @dev - The address of the pointer to the device instance used - * for DMA registration. - * @dst - destination DMA address. - * @src - source DMA address. - * @len - size of the transfer. - * - * Return DMA_SUCCESS on success - */ -static int vop_sync_dma(struct vop_vdev *vdev, dma_addr_t dst, dma_addr_t src, - size_t len) -{ - int err = 0; - struct dma_device *ddev; - struct dma_async_tx_descriptor *tx; - struct vop_info *vi = dev_get_drvdata(&vdev->vpdev->dev); - struct dma_chan *vop_ch = vi->dma_ch; - - if (!vop_ch) { - err = -EBUSY; - goto error; - } - ddev = vop_ch->device; - tx = ddev->device_prep_dma_memcpy(vop_ch, dst, src, len, - DMA_PREP_FENCE); - if (!tx) { - err = -ENOMEM; - goto error; - } else { - dma_cookie_t cookie; - - cookie = tx->tx_submit(tx); - if (dma_submit_error(cookie)) { - err = -ENOMEM; - goto error; - } - dma_async_issue_pending(vop_ch); - err = dma_sync_wait(vop_ch, cookie); - } -error: - if (err) - dev_err(&vi->vpdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - return err; -} - -#define VOP_USE_DMA true - -/* - * Initiates the copies across the PCIe bus from card memory to a user - * space buffer. When transfers are done using DMA, source/destination - * addresses and transfer length must follow the alignment requirements of - * the MIC DMA engine. - */ -static int vop_virtio_copy_to_user(struct vop_vdev *vdev, void __user *ubuf, - size_t len, u64 daddr, size_t dlen, - int vr_idx) -{ - struct vop_device *vpdev = vdev->vpdev; - void __iomem *dbuf = vpdev->hw_ops->remap(vpdev, daddr, len); - struct vop_vringh *vvr = &vdev->vvr[vr_idx]; - struct vop_info *vi = dev_get_drvdata(&vpdev->dev); - size_t dma_alignment; - bool x200; - size_t dma_offset, partlen; - int err; - - if (!VOP_USE_DMA || !vi->dma_ch) { - if (copy_to_user(ubuf, (void __force *)dbuf, len)) { - err = -EFAULT; - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, err); - goto err; - } - vdev->in_bytes += len; - err = 0; - goto err; - } - - dma_alignment = 1 << vi->dma_ch->device->copy_align; - x200 = is_dma_copy_aligned(vi->dma_ch->device, 1, 1, 1); - - dma_offset = daddr - round_down(daddr, dma_alignment); - daddr -= dma_offset; - len += dma_offset; - /* - * X100 uses DMA addresses as seen by the card so adding - * the aperture base is not required for DMA. However x200 - * requires DMA addresses to be an offset into the bar so - * add the aperture base for x200. - */ - if (x200) - daddr += vpdev->aper->pa; - while (len) { - partlen = min_t(size_t, len, VOP_INT_DMA_BUF_SIZE); - err = vop_sync_dma(vdev, vvr->buf_da, daddr, - ALIGN(partlen, dma_alignment)); - if (err) { - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, err); - goto err; - } - if (copy_to_user(ubuf, vvr->buf + dma_offset, - partlen - dma_offset)) { - err = -EFAULT; - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, err); - goto err; - } - daddr += partlen; - ubuf += partlen; - dbuf += partlen; - vdev->in_bytes_dma += partlen; - vdev->in_bytes += partlen; - len -= partlen; - dma_offset = 0; - } - err = 0; -err: - vpdev->hw_ops->unmap(vpdev, dbuf); - dev_dbg(vop_dev(vdev), - "%s: ubuf %p dbuf %p len 0x%zx vr_idx 0x%x\n", - __func__, ubuf, dbuf, len, vr_idx); - return err; -} - -/* - * Initiates copies across the PCIe bus from a user space buffer to card - * memory. When transfers are done using DMA, source/destination addresses - * and transfer length must follow the alignment requirements of the MIC - * DMA engine. - */ -static int vop_virtio_copy_from_user(struct vop_vdev *vdev, void __user *ubuf, - size_t len, u64 daddr, size_t dlen, - int vr_idx) -{ - struct vop_device *vpdev = vdev->vpdev; - void __iomem *dbuf = vpdev->hw_ops->remap(vpdev, daddr, len); - struct vop_vringh *vvr = &vdev->vvr[vr_idx]; - struct vop_info *vi = dev_get_drvdata(&vdev->vpdev->dev); - size_t dma_alignment; - bool x200; - size_t partlen; - bool dma = VOP_USE_DMA && vi->dma_ch; - int err = 0; - size_t offset = 0; - - if (dma) { - dma_alignment = 1 << vi->dma_ch->device->copy_align; - x200 = is_dma_copy_aligned(vi->dma_ch->device, 1, 1, 1); - - if (daddr & (dma_alignment - 1)) { - vdev->tx_dst_unaligned += len; - dma = false; - } else if (ALIGN(len, dma_alignment) > dlen) { - vdev->tx_len_unaligned += len; - dma = false; - } - } - - if (!dma) - goto memcpy; - - /* - * X100 uses DMA addresses as seen by the card so adding - * the aperture base is not required for DMA. However x200 - * requires DMA addresses to be an offset into the bar so - * add the aperture base for x200. - */ - if (x200) - daddr += vpdev->aper->pa; - while (len) { - partlen = min_t(size_t, len, VOP_INT_DMA_BUF_SIZE); - - if (copy_from_user(vvr->buf, ubuf, partlen)) { - err = -EFAULT; - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, err); - goto err; - } - err = vop_sync_dma(vdev, daddr, vvr->buf_da, - ALIGN(partlen, dma_alignment)); - if (err) { - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, err); - goto err; - } - daddr += partlen; - ubuf += partlen; - dbuf += partlen; - vdev->out_bytes_dma += partlen; - vdev->out_bytes += partlen; - len -= partlen; - } -memcpy: - /* - * We are copying to IO below and should ideally use something - * like copy_from_user_toio(..) if it existed. - */ - while (len) { - partlen = min_t(size_t, len, VOP_INT_DMA_BUF_SIZE); - - if (copy_from_user(vvr->buf, ubuf + offset, partlen)) { - err = -EFAULT; - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, err); - goto err; - } - memcpy_toio(dbuf + offset, vvr->buf, partlen); - offset += partlen; - vdev->out_bytes += partlen; - len -= partlen; - } - err = 0; -err: - vpdev->hw_ops->unmap(vpdev, dbuf); - dev_dbg(vop_dev(vdev), - "%s: ubuf %p dbuf %p len 0x%zx vr_idx 0x%x\n", - __func__, ubuf, dbuf, len, vr_idx); - return err; -} - -#define MIC_VRINGH_READ true - -/* Determine the total number of bytes consumed in a VRINGH KIOV */ -static inline u32 vop_vringh_iov_consumed(struct vringh_kiov *iov) -{ - int i; - u32 total = iov->consumed; - - for (i = 0; i < iov->i; i++) - total += iov->iov[i].iov_len; - return total; -} - -/* - * Traverse the VRINGH KIOV and issue the APIs to trigger the copies. - * This API is heavily based on the vringh_iov_xfer(..) implementation - * in vringh.c. The reason we cannot reuse vringh_iov_pull_kern(..) - * and vringh_iov_push_kern(..) directly is because there is no - * way to override the VRINGH xfer(..) routines as of v3.10. - */ -static int vop_vringh_copy(struct vop_vdev *vdev, struct vringh_kiov *iov, - void __user *ubuf, size_t len, bool read, int vr_idx, - size_t *out_len) -{ - int ret = 0; - size_t partlen, tot_len = 0; - - while (len && iov->i < iov->used) { - struct kvec *kiov = &iov->iov[iov->i]; - unsigned long daddr = (unsigned long)kiov->iov_base; - - partlen = min(kiov->iov_len, len); - if (read) - ret = vop_virtio_copy_to_user(vdev, ubuf, partlen, - daddr, - kiov->iov_len, - vr_idx); - else - ret = vop_virtio_copy_from_user(vdev, ubuf, partlen, - daddr, - kiov->iov_len, - vr_idx); - if (ret) { - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, ret); - break; - } - len -= partlen; - ubuf += partlen; - tot_len += partlen; - iov->consumed += partlen; - kiov->iov_len -= partlen; - kiov->iov_base += partlen; - if (!kiov->iov_len) { - /* Fix up old iov element then increment. */ - kiov->iov_len = iov->consumed; - kiov->iov_base -= iov->consumed; - - iov->consumed = 0; - iov->i++; - } - } - *out_len = tot_len; - return ret; -} - -/* - * Use the standard VRINGH infrastructure in the kernel to fetch new - * descriptors, initiate the copies and update the used ring. - */ -static int _vop_virtio_copy(struct vop_vdev *vdev, struct mic_copy_desc *copy) -{ - int ret = 0; - u32 iovcnt = copy->iovcnt; - struct iovec iov; - struct iovec __user *u_iov = copy->iov; - void __user *ubuf = NULL; - struct vop_vringh *vvr = &vdev->vvr[copy->vr_idx]; - struct vringh_kiov *riov = &vvr->riov; - struct vringh_kiov *wiov = &vvr->wiov; - struct vringh *vrh = &vvr->vrh; - u16 *head = &vvr->head; - struct mic_vring *vr = &vvr->vring; - size_t len = 0, out_len; - - copy->out_len = 0; - /* Fetch a new IOVEC if all previous elements have been processed */ - if (riov->i == riov->used && wiov->i == wiov->used) { - ret = vringh_getdesc_kern(vrh, riov, wiov, - head, GFP_KERNEL); - /* Check if there are available descriptors */ - if (ret <= 0) - return ret; - } - while (iovcnt) { - if (!len) { - /* Copy over a new iovec from user space. */ - ret = copy_from_user(&iov, u_iov, sizeof(*u_iov)); - if (ret) { - ret = -EINVAL; - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, ret); - break; - } - len = iov.iov_len; - ubuf = iov.iov_base; - } - /* Issue all the read descriptors first */ - ret = vop_vringh_copy(vdev, riov, ubuf, len, - MIC_VRINGH_READ, copy->vr_idx, &out_len); - if (ret) { - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, ret); - break; - } - len -= out_len; - ubuf += out_len; - copy->out_len += out_len; - /* Issue the write descriptors next */ - ret = vop_vringh_copy(vdev, wiov, ubuf, len, - !MIC_VRINGH_READ, copy->vr_idx, &out_len); - if (ret) { - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, ret); - break; - } - len -= out_len; - ubuf += out_len; - copy->out_len += out_len; - if (!len) { - /* One user space iovec is now completed */ - iovcnt--; - u_iov++; - } - /* Exit loop if all elements in KIOVs have been processed. */ - if (riov->i == riov->used && wiov->i == wiov->used) - break; - } - /* - * Update the used ring if a descriptor was available and some data was - * copied in/out and the user asked for a used ring update. - */ - if (*head != USHRT_MAX && copy->out_len && copy->update_used) { - u32 total = 0; - - /* Determine the total data consumed */ - total += vop_vringh_iov_consumed(riov); - total += vop_vringh_iov_consumed(wiov); - vringh_complete_kern(vrh, *head, total); - *head = USHRT_MAX; - if (vringh_need_notify_kern(vrh) > 0) - vringh_notify(vrh); - vringh_kiov_cleanup(riov); - vringh_kiov_cleanup(wiov); - /* Update avail idx for user space */ - vr->info->avail_idx = vrh->last_avail_idx; - } - return ret; -} - -static inline int vop_verify_copy_args(struct vop_vdev *vdev, - struct mic_copy_desc *copy) -{ - if (!vdev || copy->vr_idx >= vdev->dd->num_vq) - return -EINVAL; - return 0; -} - -/* Copy a specified number of virtio descriptors in a chain */ -static int vop_virtio_copy_desc(struct vop_vdev *vdev, - struct mic_copy_desc *copy) -{ - int err; - struct vop_vringh *vvr; - - err = vop_verify_copy_args(vdev, copy); - if (err) - return err; - - vvr = &vdev->vvr[copy->vr_idx]; - mutex_lock(&vvr->vr_mutex); - if (!vop_vdevup(vdev)) { - err = -ENODEV; - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, err); - goto err; - } - err = _vop_virtio_copy(vdev, copy); - if (err) { - dev_err(vop_dev(vdev), "%s %d err %d\n", - __func__, __LINE__, err); - } -err: - mutex_unlock(&vvr->vr_mutex); - return err; -} - -static int vop_open(struct inode *inode, struct file *f) -{ - struct vop_vdev *vdev; - struct vop_info *vi = container_of(f->private_data, - struct vop_info, miscdev); - - vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); - if (!vdev) - return -ENOMEM; - vdev->vi = vi; - mutex_init(&vdev->vdev_mutex); - f->private_data = vdev; - init_completion(&vdev->destroy); - complete(&vdev->destroy); - return 0; -} - -static int vop_release(struct inode *inode, struct file *f) -{ - struct vop_vdev *vdev = f->private_data, *vdev_tmp; - struct vop_info *vi = vdev->vi; - struct list_head *pos, *tmp; - bool found = false; - - mutex_lock(&vdev->vdev_mutex); - if (vdev->deleted) - goto unlock; - mutex_lock(&vi->vop_mutex); - list_for_each_safe(pos, tmp, &vi->vdev_list) { - vdev_tmp = list_entry(pos, struct vop_vdev, list); - if (vdev == vdev_tmp) { - vop_virtio_del_device(vdev); - list_del(pos); - found = true; - break; - } - } - mutex_unlock(&vi->vop_mutex); -unlock: - mutex_unlock(&vdev->vdev_mutex); - if (!found) - wait_for_completion(&vdev->destroy); - f->private_data = NULL; - kfree(vdev); - return 0; -} - -static long vop_ioctl(struct file *f, unsigned int cmd, unsigned long arg) -{ - struct vop_vdev *vdev = f->private_data; - struct vop_info *vi = vdev->vi; - void __user *argp = (void __user *)arg; - int ret; - - switch (cmd) { - case MIC_VIRTIO_ADD_DEVICE: - { - struct mic_device_desc dd, *dd_config; - - if (copy_from_user(&dd, argp, sizeof(dd))) - return -EFAULT; - - if (mic_aligned_desc_size(&dd) > MIC_MAX_DESC_BLK_SIZE || - dd.num_vq > MIC_MAX_VRINGS) - return -EINVAL; - - dd_config = memdup_user(argp, mic_desc_size(&dd)); - if (IS_ERR(dd_config)) - return PTR_ERR(dd_config); - - /* Ensure desc has not changed between the two reads */ - if (memcmp(&dd, dd_config, sizeof(dd))) { - ret = -EINVAL; - goto free_ret; - } - mutex_lock(&vdev->vdev_mutex); - mutex_lock(&vi->vop_mutex); - ret = vop_virtio_add_device(vdev, dd_config); - if (ret) - goto unlock_ret; - list_add_tail(&vdev->list, &vi->vdev_list); -unlock_ret: - mutex_unlock(&vi->vop_mutex); - mutex_unlock(&vdev->vdev_mutex); -free_ret: - kfree(dd_config); - return ret; - } - case MIC_VIRTIO_COPY_DESC: - { - struct mic_copy_desc copy; - - mutex_lock(&vdev->vdev_mutex); - ret = vop_vdev_inited(vdev); - if (ret) - goto _unlock_ret; - - if (copy_from_user(©, argp, sizeof(copy))) { - ret = -EFAULT; - goto _unlock_ret; - } - - ret = vop_virtio_copy_desc(vdev, ©); - if (ret < 0) - goto _unlock_ret; - if (copy_to_user( - &((struct mic_copy_desc __user *)argp)->out_len, - ©.out_len, sizeof(copy.out_len))) - ret = -EFAULT; -_unlock_ret: - mutex_unlock(&vdev->vdev_mutex); - return ret; - } - case MIC_VIRTIO_CONFIG_CHANGE: - { - void *buf; - - mutex_lock(&vdev->vdev_mutex); - ret = vop_vdev_inited(vdev); - if (ret) - goto __unlock_ret; - buf = memdup_user(argp, vdev->dd->config_len); - if (IS_ERR(buf)) { - ret = PTR_ERR(buf); - goto __unlock_ret; - } - ret = vop_virtio_config_change(vdev, buf); - kfree(buf); -__unlock_ret: - mutex_unlock(&vdev->vdev_mutex); - return ret; - } - default: - return -ENOIOCTLCMD; - }; - return 0; -} - -/* - * We return EPOLLIN | EPOLLOUT from poll when new buffers are enqueued, and - * not when previously enqueued buffers may be available. This means that - * in the card->host (TX) path, when userspace is unblocked by poll it - * must drain all available descriptors or it can stall. - */ -static __poll_t vop_poll(struct file *f, poll_table *wait) -{ - struct vop_vdev *vdev = f->private_data; - __poll_t mask = 0; - - mutex_lock(&vdev->vdev_mutex); - if (vop_vdev_inited(vdev)) { - mask = EPOLLERR; - goto done; - } - poll_wait(f, &vdev->waitq, wait); - if (vop_vdev_inited(vdev)) { - mask = EPOLLERR; - } else if (vdev->poll_wake) { - vdev->poll_wake = 0; - mask = EPOLLIN | EPOLLOUT; - } -done: - mutex_unlock(&vdev->vdev_mutex); - return mask; -} - -static inline int -vop_query_offset(struct vop_vdev *vdev, unsigned long offset, - unsigned long *size, unsigned long *pa) -{ - struct vop_device *vpdev = vdev->vpdev; - unsigned long start = MIC_DP_SIZE; - int i; - - /* - * MMAP interface is as follows: - * offset region - * 0x0 virtio device_page - * 0x1000 first vring - * 0x1000 + size of 1st vring second vring - * .... - */ - if (!offset) { - *pa = virt_to_phys(vpdev->hw_ops->get_dp(vpdev)); - *size = MIC_DP_SIZE; - return 0; - } - - for (i = 0; i < vdev->dd->num_vq; i++) { - struct vop_vringh *vvr = &vdev->vvr[i]; - - if (offset == start) { - *pa = virt_to_phys(vvr->vring.va); - *size = vvr->vring.len; - return 0; - } - start += vvr->vring.len; - } - return -1; -} - -/* - * Maps the device page and virtio rings to user space for readonly access. - */ -static int vop_mmap(struct file *f, struct vm_area_struct *vma) -{ - struct vop_vdev *vdev = f->private_data; - unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; - unsigned long pa, size = vma->vm_end - vma->vm_start, size_rem = size; - int i, err; - - err = vop_vdev_inited(vdev); - if (err) - goto ret; - if (vma->vm_flags & VM_WRITE) { - err = -EACCES; - goto ret; - } - while (size_rem) { - i = vop_query_offset(vdev, offset, &size, &pa); - if (i < 0) { - err = -EINVAL; - goto ret; - } - err = remap_pfn_range(vma, vma->vm_start + offset, - pa >> PAGE_SHIFT, size, - vma->vm_page_prot); - if (err) - goto ret; - size_rem -= size; - offset += size; - } -ret: - return err; -} - -static const struct file_operations vop_fops = { - .open = vop_open, - .release = vop_release, - .unlocked_ioctl = vop_ioctl, - .poll = vop_poll, - .mmap = vop_mmap, - .owner = THIS_MODULE, -}; - -int vop_host_init(struct vop_info *vi) -{ - int rc; - struct miscdevice *mdev; - struct vop_device *vpdev = vi->vpdev; - - INIT_LIST_HEAD(&vi->vdev_list); - vi->dma_ch = vpdev->dma_ch; - mdev = &vi->miscdev; - mdev->minor = MISC_DYNAMIC_MINOR; - snprintf(vi->name, sizeof(vi->name), "vop_virtio%d", vpdev->index); - mdev->name = vi->name; - mdev->fops = &vop_fops; - mdev->parent = &vpdev->dev; - - rc = misc_register(mdev); - if (rc) - dev_err(&vpdev->dev, "%s failed rc %d\n", __func__, rc); - return rc; -} - -void vop_host_uninit(struct vop_info *vi) -{ - struct list_head *pos, *tmp; - struct vop_vdev *vdev; - - mutex_lock(&vi->vop_mutex); - vop_virtio_reset_devices(vi); - list_for_each_safe(pos, tmp, &vi->vdev_list) { - vdev = list_entry(pos, struct vop_vdev, list); - list_del(pos); - reinit_completion(&vdev->destroy); - mutex_unlock(&vi->vop_mutex); - mutex_lock(&vdev->vdev_mutex); - vop_virtio_del_device(vdev); - vdev->deleted = true; - mutex_unlock(&vdev->vdev_mutex); - complete(&vdev->destroy); - mutex_lock(&vi->vop_mutex); - } - mutex_unlock(&vi->vop_mutex); - misc_deregister(&vi->miscdev); -} diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h index a30796e79b1c..6de02f09c322 100644 --- a/drivers/mmc/host/sdhci-esdhc.h +++ b/drivers/mmc/host/sdhci-esdhc.h @@ -5,6 +5,7 @@ * Copyright (c) 2007 Freescale Semiconductor, Inc. * Copyright (c) 2009 MontaVista Software, Inc. * Copyright (c) 2010 Pengutronix e.K. + * Copyright 2020 NXP * Author: Wolfram Sang <kernel@pengutronix.de> */ @@ -88,6 +89,7 @@ /* DLL Config 0 Register */ #define ESDHC_DLLCFG0 0x160 #define ESDHC_DLL_ENABLE 0x80000000 +#define ESDHC_DLL_RESET 0x40000000 #define ESDHC_DLL_FREQ_SEL 0x08000000 /* DLL Config 1 Register */ diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 0b45eff6fed4..bb094459196a 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -4,6 +4,7 @@ * * Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc. * Copyright (c) 2009 MontaVista Software, Inc. + * Copyright 2020 NXP * * Authors: Xiaobo Xie <X.Xie@freescale.com> * Anton Vorontsov <avorontsov@ru.mvista.com> @@ -19,6 +20,7 @@ #include <linux/clk.h> #include <linux/ktime.h> #include <linux/dma-mapping.h> +#include <linux/iopoll.h> #include <linux/mmc/host.h> #include <linux/mmc/mmc.h> #include "sdhci-pltfm.h" @@ -743,6 +745,21 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) if (host->mmc->actual_clock == MMC_HS200_MAX_DTR) temp |= ESDHC_DLL_FREQ_SEL; sdhci_writel(host, temp, ESDHC_DLLCFG0); + + temp |= ESDHC_DLL_RESET; + sdhci_writel(host, temp, ESDHC_DLLCFG0); + udelay(1); + temp &= ~ESDHC_DLL_RESET; + sdhci_writel(host, temp, ESDHC_DLLCFG0); + + /* Wait max 20 ms */ + if (read_poll_timeout(sdhci_readl, temp, + temp & ESDHC_DLL_STS_SLV_LOCK, + 10, 20000, false, + host, ESDHC_DLLSTAT0)) + pr_err("%s: timeout for delay chain lock.\n", + mmc_hostname(host->mmc)); + temp = sdhci_readl(host, ESDHC_TBCTL); sdhci_writel(host, temp | ESDHC_HS400_WNDW_ADJUST, ESDHC_TBCTL); @@ -1052,6 +1069,17 @@ static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) esdhc_tuning_block_enable(host, true); + /* + * The eSDHC controller takes the data timeout value into account + * during tuning. If the SD card is too slow sending the response, the + * timer will expire and a "Buffer Read Ready" interrupt without data + * is triggered. This leads to tuning errors. + * + * Just set the timeout to the maximum value because the core will + * already take care of it in sdhci_send_tuning(). + */ + sdhci_writeb(host, 0xe, SDHCI_TIMEOUT_CONTROL); + hs400_tuning = host->flags & SDHCI_HS400_TUNING; do { diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 592a55a34b58..3561ae8a481a 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1384,9 +1384,11 @@ static inline void sdhci_auto_cmd_select(struct sdhci_host *host, /* * In case of Version 4.10 or later, use of 'Auto CMD Auto * Select' is recommended rather than use of 'Auto CMD12 - * Enable' or 'Auto CMD23 Enable'. + * Enable' or 'Auto CMD23 Enable'. We require Version 4 Mode + * here because some controllers (e.g sdhci-of-dwmshc) expect it. */ - if (host->version >= SDHCI_SPEC_410 && (use_cmd12 || use_cmd23)) { + if (host->version >= SDHCI_SPEC_410 && host->v4_mode && + (use_cmd12 || use_cmd23)) { *mode |= SDHCI_TRNS_AUTO_SEL; ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c index 0e7a9b64301e..e345f9d9f8e8 100644 --- a/drivers/mtd/nand/raw/fsl_ifc_nand.c +++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c @@ -707,6 +707,30 @@ static int fsl_ifc_attach_chip(struct nand_chip *chip) { struct mtd_info *mtd = nand_to_mtd(chip); struct fsl_ifc_mtd *priv = nand_get_controller_data(chip); + struct fsl_ifc_ctrl *ctrl = priv->ctrl; + struct fsl_ifc_global __iomem *ifc_global = ctrl->gregs; + u32 csor; + + csor = ifc_in32(&ifc_global->csor_cs[priv->bank].csor); + + /* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */ + if (csor & CSOR_NAND_ECC_DEC_EN) { + chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST; + mtd_set_ooblayout(mtd, &fsl_ifc_ooblayout_ops); + + /* Hardware generates ECC per 512 Bytes */ + chip->ecc.size = 512; + if ((csor & CSOR_NAND_ECC_MODE_MASK) == CSOR_NAND_ECC_MODE_4) { + chip->ecc.bytes = 8; + chip->ecc.strength = 4; + } else { + chip->ecc.bytes = 16; + chip->ecc.strength = 8; + } + } else { + chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT; + chip->ecc.algo = NAND_ECC_ALGO_HAMMING; + } dev_dbg(priv->dev, "%s: nand->numchips = %d\n", __func__, nanddev_ntargets(&chip->base)); @@ -910,25 +934,6 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) return -ENODEV; } - /* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */ - if (csor & CSOR_NAND_ECC_DEC_EN) { - chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST; - mtd_set_ooblayout(mtd, &fsl_ifc_ooblayout_ops); - - /* Hardware generates ECC per 512 Bytes */ - chip->ecc.size = 512; - if ((csor & CSOR_NAND_ECC_MODE_MASK) == CSOR_NAND_ECC_MODE_4) { - chip->ecc.bytes = 8; - chip->ecc.strength = 4; - } else { - chip->ecc.bytes = 16; - chip->ecc.strength = 8; - } - } else { - chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT; - chip->ecc.algo = NAND_ECC_ALGO_HAMMING; - } - ret = fsl_ifc_sram_init(priv); if (ret) return ret; diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c index d4200eb2ad32..684c51e5e60d 100644 --- a/drivers/mtd/nand/raw/mxc_nand.c +++ b/drivers/mtd/nand/raw/mxc_nand.c @@ -1681,6 +1681,11 @@ static int mxcnd_attach_chip(struct nand_chip *chip) struct mxc_nand_host *host = nand_get_controller_data(chip); struct device *dev = mtd->dev.parent; + chip->ecc.bytes = host->devtype_data->eccbytes; + host->eccsize = host->devtype_data->eccsize; + chip->ecc.size = 512; + mtd_set_ooblayout(mtd, host->devtype_data->ooblayout); + switch (chip->ecc.engine_type) { case NAND_ECC_ENGINE_TYPE_ON_HOST: chip->ecc.read_page = mxc_nand_read_page; @@ -1836,19 +1841,7 @@ static int mxcnd_probe(struct platform_device *pdev) if (host->devtype_data->axi_offset) host->regs_axi = host->base + host->devtype_data->axi_offset; - this->ecc.bytes = host->devtype_data->eccbytes; - host->eccsize = host->devtype_data->eccsize; - this->legacy.select_chip = host->devtype_data->select_chip; - this->ecc.size = 512; - mtd_set_ooblayout(mtd, host->devtype_data->ooblayout); - - if (host->pdata.hw_ecc) { - this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST; - } else { - this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT; - this->ecc.algo = NAND_ECC_ALGO_HAMMING; - } /* NAND bus width determines access functions used by upper layer */ if (host->pdata.width == 2) diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c index b31a5818234d..550bda4d1415 100644 --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c @@ -1708,6 +1708,13 @@ static int stm32_fmc2_nfc_attach_chip(struct nand_chip *chip) return -EINVAL; } + /* Default ECC settings in case they are not set in the device tree */ + if (!chip->ecc.size) + chip->ecc.size = FMC2_ECC_STEP_SIZE; + + if (!chip->ecc.strength) + chip->ecc.strength = FMC2_ECC_BCH8; + ret = nand_ecc_choose_conf(chip, &stm32_fmc2_nfc_ecc_caps, mtd->oobsize - FMC2_BBM_LEN); if (ret) { @@ -1727,8 +1734,7 @@ static int stm32_fmc2_nfc_attach_chip(struct nand_chip *chip) mtd_set_ooblayout(mtd, &stm32_fmc2_nfc_ooblayout_ops); - if (chip->options & NAND_BUSWIDTH_16) - stm32_fmc2_nfc_set_buswidth_16(nfc, true); + stm32_fmc2_nfc_setup(chip); return 0; } @@ -1952,11 +1958,6 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev) chip->options |= NAND_BUSWIDTH_AUTO | NAND_NO_SUBPAGE_WRITE | NAND_USES_DMA; - /* Default ECC settings */ - chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST; - chip->ecc.size = FMC2_ECC_STEP_SIZE; - chip->ecc.strength = FMC2_ECC_BCH8; - /* Scan to find existence of the device */ ret = nand_scan(chip, nand->ncs); if (ret) diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c index 0369d98b2d12..f0ae7a01703a 100644 --- a/drivers/mtd/spi-nor/core.c +++ b/drivers/mtd/spi-nor/core.c @@ -2701,11 +2701,10 @@ static void spi_nor_sfdp_init_params(struct spi_nor *nor) memcpy(&sfdp_params, nor->params, sizeof(sfdp_params)); - if (spi_nor_parse_sfdp(nor, &sfdp_params)) { + if (spi_nor_parse_sfdp(nor, nor->params)) { + memcpy(nor->params, &sfdp_params, sizeof(*nor->params)); nor->addr_width = 0; nor->flags &= ~SNOR_F_4B_OPCODES; - } else { - memcpy(nor->params, &sfdp_params, sizeof(*nor->params)); } } @@ -3009,13 +3008,15 @@ static int spi_nor_set_addr_width(struct spi_nor *nor) /* already configured from SFDP */ } else if (nor->info->addr_width) { nor->addr_width = nor->info->addr_width; - } else if (nor->mtd.size > 0x1000000) { - /* enable 4-byte addressing if the device exceeds 16MiB */ - nor->addr_width = 4; } else { nor->addr_width = 3; } + if (nor->addr_width == 3 && nor->mtd.size > 0x1000000) { + /* enable 4-byte addressing if the device exceeds 16MiB */ + nor->addr_width = 4; + } + if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) { dev_dbg(nor->dev, "address width is too large: %u\n", nor->addr_width); diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index b70ded3760f2..6dee4f8f2024 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -512,9 +512,13 @@ __can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr) */ struct sk_buff *skb = priv->echo_skb[idx]; struct canfd_frame *cf = (struct canfd_frame *)skb->data; - u8 len = cf->len; - *len_ptr = len; + /* get the real payload length for netdev statistics */ + if (cf->can_id & CAN_RTR_FLAG) + *len_ptr = 0; + else + *len_ptr = cf->len; + priv->echo_skb[idx] = NULL; return skb; @@ -538,7 +542,11 @@ unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx) if (!skb) return 0; - netif_rx(skb); + skb_get(skb); + if (netif_rx(skb) == NET_RX_SUCCESS) + dev_consume_skb_any(skb); + else + dev_kfree_skb_any(skb); return len; } diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 4d594e977497..881799bd9c5e 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -217,7 +217,7 @@ * MX8MP FlexCAN3 03.00.17.01 yes yes no yes yes yes * VF610 FlexCAN3 ? no yes no yes yes? no * LS1021A FlexCAN2 03.00.04.00 no yes no no yes no - * LX2160A FlexCAN3 03.00.23.00 no yes no no yes yes + * LX2160A FlexCAN3 03.00.23.00 no yes no yes yes yes * * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected. */ @@ -400,19 +400,19 @@ static struct flexcan_devtype_data fsl_imx8mp_devtype_data = { static const struct flexcan_devtype_data fsl_vf610_devtype_data = { .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS | FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | - FLEXCAN_QUIRK_BROKEN_PERR_STATE, + FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SUPPORT_ECC, }; static const struct flexcan_devtype_data fsl_ls1021a_r2_devtype_data = { .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS | - FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE | - FLEXCAN_QUIRK_USE_OFF_TIMESTAMP, + FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP, }; static const struct flexcan_devtype_data fsl_lx2160a_r1_devtype_data = { .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS | FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE | - FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_SUPPORT_FD, + FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_SUPPORT_FD | + FLEXCAN_QUIRK_SUPPORT_ECC, }; static const struct can_bittiming_const flexcan_bittiming_const = { @@ -2062,6 +2062,8 @@ static int flexcan_remove(struct platform_device *pdev) { struct net_device *dev = platform_get_drvdata(pdev); + device_set_wakeup_enable(&pdev->dev, false); + device_set_wakeup_capable(&pdev->dev, false); unregister_flexcandev(dev); pm_runtime_disable(&pdev->dev); free_candev(dev); diff --git a/drivers/net/can/peak_canfd/peak_canfd.c b/drivers/net/can/peak_canfd/peak_canfd.c index 10aa3e457c33..40c33b8a5fda 100644 --- a/drivers/net/can/peak_canfd/peak_canfd.c +++ b/drivers/net/can/peak_canfd/peak_canfd.c @@ -262,8 +262,7 @@ static int pucan_handle_can_rx(struct peak_canfd_priv *priv, cf_len = get_can_dlc(pucan_msg_get_dlc(msg)); /* if this frame is an echo, */ - if ((rx_msg_flags & PUCAN_MSG_LOOPED_BACK) && - !(rx_msg_flags & PUCAN_MSG_SELF_RECEIVE)) { + if (rx_msg_flags & PUCAN_MSG_LOOPED_BACK) { unsigned long flags; spin_lock_irqsave(&priv->echo_lock, flags); @@ -277,7 +276,13 @@ static int pucan_handle_can_rx(struct peak_canfd_priv *priv, netif_wake_queue(priv->ndev); spin_unlock_irqrestore(&priv->echo_lock, flags); - return 0; + + /* if this frame is only an echo, stop here. Otherwise, + * continue to push this application self-received frame into + * its own rx queue. + */ + if (!(rx_msg_flags & PUCAN_MSG_SELF_RECEIVE)) + return 0; } /* otherwise, it should be pushed into rx fifo */ diff --git a/drivers/net/can/rx-offload.c b/drivers/net/can/rx-offload.c index 3b180269a92d..6e95193b215b 100644 --- a/drivers/net/can/rx-offload.c +++ b/drivers/net/can/rx-offload.c @@ -245,7 +245,7 @@ int can_rx_offload_queue_sorted(struct can_rx_offload *offload, if (skb_queue_len(&offload->skb_queue) > offload->skb_queue_len_max) { - kfree_skb(skb); + dev_kfree_skb_any(skb); return -ENOBUFS; } @@ -290,7 +290,7 @@ int can_rx_offload_queue_tail(struct can_rx_offload *offload, { if (skb_queue_len(&offload->skb_queue) > offload->skb_queue_len_max) { - kfree_skb(skb); + dev_kfree_skb_any(skb); return -ENOBUFS; } diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c index c3f49543ff26..9c215f7c5f81 100644 --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c @@ -75,11 +75,11 @@ static const char *__mcp251xfd_get_model_str(enum mcp251xfd_model model) { switch (model) { case MCP251XFD_MODEL_MCP2517FD: - return "MCP2517FD"; break; + return "MCP2517FD"; case MCP251XFD_MODEL_MCP2518FD: - return "MCP2518FD"; break; + return "MCP2518FD"; case MCP251XFD_MODEL_MCP251XFD: - return "MCP251xFD"; break; + return "MCP251xFD"; } return "<unknown>"; @@ -95,21 +95,21 @@ static const char *mcp251xfd_get_mode_str(const u8 mode) { switch (mode) { case MCP251XFD_REG_CON_MODE_MIXED: - return "Mixed (CAN FD/CAN 2.0)"; break; + return "Mixed (CAN FD/CAN 2.0)"; case MCP251XFD_REG_CON_MODE_SLEEP: - return "Sleep"; break; + return "Sleep"; case MCP251XFD_REG_CON_MODE_INT_LOOPBACK: - return "Internal Loopback"; break; + return "Internal Loopback"; case MCP251XFD_REG_CON_MODE_LISTENONLY: - return "Listen Only"; break; + return "Listen Only"; case MCP251XFD_REG_CON_MODE_CONFIG: - return "Configuration"; break; + return "Configuration"; case MCP251XFD_REG_CON_MODE_EXT_LOOPBACK: - return "External Loopback"; break; + return "External Loopback"; case MCP251XFD_REG_CON_MODE_CAN2_0: - return "CAN 2.0"; break; + return "CAN 2.0"; case MCP251XFD_REG_CON_MODE_RESTRICTED: - return "Restricted Operation"; break; + return "Restricted Operation"; } return "<unknown>"; diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.c index ba25902dd78c..314f868b3465 100644 --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.c +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.c @@ -173,7 +173,7 @@ mcp251xfd_regmap_nocrc_read(void *context, memcpy(&buf_tx->cmd, reg, sizeof(buf_tx->cmd)); if (MCP251XFD_SANITIZE_SPI) memset(buf_tx->data, 0x0, val_len); - }; + } err = spi_sync(spi, &msg); if (err) @@ -330,17 +330,17 @@ mcp251xfd_regmap_crc_read(void *context, goto out; } - netdev_dbg(priv->ndev, - "CRC read error at address 0x%04x (length=%zd, data=%*ph, CRC=0x%04x) retrying.\n", - reg, val_len, (int)val_len, buf_rx->data, - get_unaligned_be16(buf_rx->data + val_len)); - } - - if (err) { netdev_info(priv->ndev, - "CRC read error at address 0x%04x (length=%zd, data=%*ph, CRC=0x%04x).\n", + "CRC read error at address 0x%04x (length=%zd, data=%*ph, CRC=0x%04x) retrying.\n", reg, val_len, (int)val_len, buf_rx->data, get_unaligned_be16(buf_rx->data + val_len)); + } + + if (err) { + netdev_err(priv->ndev, + "CRC read error at address 0x%04x (length=%zd, data=%*ph, CRC=0x%04x).\n", + reg, val_len, (int)val_len, buf_rx->data, + get_unaligned_be16(buf_rx->data + val_len)); return err; } diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c index 1d63006c97bc..9913f5458279 100644 --- a/drivers/net/can/ti_hecc.c +++ b/drivers/net/can/ti_hecc.c @@ -933,7 +933,7 @@ static int ti_hecc_probe(struct platform_device *pdev) err = clk_prepare_enable(priv->clk); if (err) { dev_err(&pdev->dev, "clk_prepare_enable() failed\n"); - goto probe_exit_clk; + goto probe_exit_release_clk; } priv->offload.mailbox_read = ti_hecc_mailbox_read; @@ -942,7 +942,7 @@ static int ti_hecc_probe(struct platform_device *pdev) err = can_rx_offload_add_timestamp(ndev, &priv->offload); if (err) { dev_err(&pdev->dev, "can_rx_offload_add_timestamp() failed\n"); - goto probe_exit_clk; + goto probe_exit_disable_clk; } err = register_candev(ndev); @@ -960,7 +960,9 @@ static int ti_hecc_probe(struct platform_device *pdev) probe_exit_offload: can_rx_offload_del(&priv->offload); -probe_exit_clk: +probe_exit_disable_clk: + clk_disable_unprepare(priv->clk); +probe_exit_release_clk: clk_put(priv->clk); probe_exit_candev: free_candev(ndev); diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c index d91df34e7fa8..c2764799f9ef 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c @@ -130,14 +130,55 @@ void peak_usb_get_ts_time(struct peak_time_ref *time_ref, u32 ts, ktime_t *time) /* protect from getting time before setting now */ if (ktime_to_ns(time_ref->tv_host)) { u64 delta_us; + s64 delta_ts = 0; + + /* General case: dev_ts_1 < dev_ts_2 < ts, with: + * + * - dev_ts_1 = previous sync timestamp + * - dev_ts_2 = last sync timestamp + * - ts = event timestamp + * - ts_period = known sync period (theoretical) + * ~ dev_ts2 - dev_ts1 + * *but*: + * + * - time counters wrap (see adapter->ts_used_bits) + * - sometimes, dev_ts_1 < ts < dev_ts2 + * + * "normal" case (sync time counters increase): + * must take into account case when ts wraps (tsw) + * + * < ts_period > < > + * | | | + * ---+--------+----+-------0-+--+--> + * ts_dev_1 | ts_dev_2 | + * ts tsw + */ + if (time_ref->ts_dev_1 < time_ref->ts_dev_2) { + /* case when event time (tsw) wraps */ + if (ts < time_ref->ts_dev_1) + delta_ts = 1 << time_ref->adapter->ts_used_bits; + + /* Otherwise, sync time counter (ts_dev_2) has wrapped: + * handle case when event time (tsn) hasn't. + * + * < ts_period > < > + * | | | + * ---+--------+--0-+---------+--+--> + * ts_dev_1 | ts_dev_2 | + * tsn ts + */ + } else if (time_ref->ts_dev_1 < ts) { + delta_ts = -(1 << time_ref->adapter->ts_used_bits); + } - delta_us = ts - time_ref->ts_dev_2; - if (ts < time_ref->ts_dev_2) - delta_us &= (1 << time_ref->adapter->ts_used_bits) - 1; + /* add delay between last sync and event timestamps */ + delta_ts += (signed int)(ts - time_ref->ts_dev_2); - delta_us += time_ref->ts_total; + /* add time from beginning to last sync */ + delta_ts += time_ref->ts_total; - delta_us *= time_ref->adapter->us_per_ts_scale; + /* convert ticks number into microseconds */ + delta_us = delta_ts * time_ref->adapter->us_per_ts_scale; delta_us >>= time_ref->adapter->us_per_ts_shift; *time = ktime_add_us(time_ref->tv_host_0, delta_us); diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c index ab63fd9eb982..d29d20525588 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c @@ -468,12 +468,18 @@ static int pcan_usb_fd_decode_canmsg(struct pcan_usb_fd_if *usb_if, struct pucan_msg *rx_msg) { struct pucan_rx_msg *rm = (struct pucan_rx_msg *)rx_msg; - struct peak_usb_device *dev = usb_if->dev[pucan_msg_get_channel(rm)]; - struct net_device *netdev = dev->netdev; + struct peak_usb_device *dev; + struct net_device *netdev; struct canfd_frame *cfd; struct sk_buff *skb; const u16 rx_msg_flags = le16_to_cpu(rm->flags); + if (pucan_msg_get_channel(rm) >= ARRAY_SIZE(usb_if->dev)) + return -ENOMEM; + + dev = usb_if->dev[pucan_msg_get_channel(rm)]; + netdev = dev->netdev; + if (rx_msg_flags & PUCAN_MSG_EXT_DATA_LEN) { /* CANFD frame case */ skb = alloc_canfd_skb(netdev, &cfd); @@ -519,15 +525,21 @@ static int pcan_usb_fd_decode_status(struct pcan_usb_fd_if *usb_if, struct pucan_msg *rx_msg) { struct pucan_status_msg *sm = (struct pucan_status_msg *)rx_msg; - struct peak_usb_device *dev = usb_if->dev[pucan_stmsg_get_channel(sm)]; - struct pcan_usb_fd_device *pdev = - container_of(dev, struct pcan_usb_fd_device, dev); + struct pcan_usb_fd_device *pdev; enum can_state new_state = CAN_STATE_ERROR_ACTIVE; enum can_state rx_state, tx_state; - struct net_device *netdev = dev->netdev; + struct peak_usb_device *dev; + struct net_device *netdev; struct can_frame *cf; struct sk_buff *skb; + if (pucan_stmsg_get_channel(sm) >= ARRAY_SIZE(usb_if->dev)) + return -ENOMEM; + + dev = usb_if->dev[pucan_stmsg_get_channel(sm)]; + pdev = container_of(dev, struct pcan_usb_fd_device, dev); + netdev = dev->netdev; + /* nothing should be sent while in BUS_OFF state */ if (dev->can.state == CAN_STATE_BUS_OFF) return 0; @@ -579,9 +591,14 @@ static int pcan_usb_fd_decode_error(struct pcan_usb_fd_if *usb_if, struct pucan_msg *rx_msg) { struct pucan_error_msg *er = (struct pucan_error_msg *)rx_msg; - struct peak_usb_device *dev = usb_if->dev[pucan_ermsg_get_channel(er)]; - struct pcan_usb_fd_device *pdev = - container_of(dev, struct pcan_usb_fd_device, dev); + struct pcan_usb_fd_device *pdev; + struct peak_usb_device *dev; + + if (pucan_ermsg_get_channel(er) >= ARRAY_SIZE(usb_if->dev)) + return -EINVAL; + + dev = usb_if->dev[pucan_ermsg_get_channel(er)]; + pdev = container_of(dev, struct pcan_usb_fd_device, dev); /* keep a trace of tx and rx error counters for later use */ pdev->bec.txerr = er->tx_err_cnt; @@ -595,11 +612,17 @@ static int pcan_usb_fd_decode_overrun(struct pcan_usb_fd_if *usb_if, struct pucan_msg *rx_msg) { struct pcan_ufd_ovr_msg *ov = (struct pcan_ufd_ovr_msg *)rx_msg; - struct peak_usb_device *dev = usb_if->dev[pufd_omsg_get_channel(ov)]; - struct net_device *netdev = dev->netdev; + struct peak_usb_device *dev; + struct net_device *netdev; struct can_frame *cf; struct sk_buff *skb; + if (pufd_omsg_get_channel(ov) >= ARRAY_SIZE(usb_if->dev)) + return -EINVAL; + + dev = usb_if->dev[pufd_omsg_get_channel(ov)]; + netdev = dev->netdev; + /* allocate an skb to store the error frame */ skb = alloc_can_err_skb(netdev, &cf); if (!skb) @@ -716,6 +739,9 @@ static int pcan_usb_fd_encode_msg(struct peak_usb_device *dev, u16 tx_msg_size, tx_msg_flags; u8 can_dlc; + if (cfd->len > CANFD_MAX_DLEN) + return -EINVAL; + tx_msg_size = ALIGN(sizeof(struct pucan_tx_msg) + cfd->len, 4); tx_msg->size = cpu_to_le16(tx_msg_size); tx_msg->type = cpu_to_le16(PUCAN_MSG_CAN_TX); diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 6c4d00d2dbdc..48d746e18f30 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -1395,7 +1395,7 @@ static int xcan_open(struct net_device *ndev) if (ret < 0) { netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n", __func__, ret); - return ret; + goto err; } ret = request_irq(ndev->irq, xcan_interrupt, priv->irq_flags, @@ -1479,6 +1479,7 @@ static int xcan_get_berr_counter(const struct net_device *ndev, if (ret < 0) { netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n", __func__, ret); + pm_runtime_put(priv->dev); return ret; } @@ -1793,7 +1794,7 @@ static int xcan_probe(struct platform_device *pdev) if (ret < 0) { netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n", __func__, ret); - goto err_pmdisable; + goto err_disableclks; } if (priv->read_reg(priv, XCAN_SR_OFFSET) != XCAN_SR_CONFIG_MASK) { @@ -1828,7 +1829,6 @@ static int xcan_probe(struct platform_device *pdev) err_disableclks: pm_runtime_put(priv->dev); -err_pmdisable: pm_runtime_disable(&pdev->dev); err_free: free_candev(ndev); diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index 53064e0e1618..5bdac669a339 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -1219,8 +1219,8 @@ qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) priv->port_mtu[port] = new_mtu; for (i = 0; i < QCA8K_NUM_PORTS; i++) - if (priv->port_mtu[port] > mtu) - mtu = priv->port_mtu[port]; + if (priv->port_mtu[i] > mtu) + mtu = priv->port_mtu[i]; /* Include L2 header / FCS length */ qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, mtu + ETH_HLEN + ETH_FCS_LEN); diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index fa147865e33f..7975f59735d6 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -1160,16 +1160,6 @@ static void bnxt_queue_sp_work(struct bnxt *bp) schedule_work(&bp->sp_task); } -static void bnxt_cancel_sp_work(struct bnxt *bp) -{ - if (BNXT_PF(bp)) { - flush_workqueue(bnxt_pf_wq); - } else { - cancel_work_sync(&bp->sp_task); - cancel_delayed_work_sync(&bp->fw_reset_task); - } -} - static void bnxt_sched_reset(struct bnxt *bp, struct bnxt_rx_ring_info *rxr) { if (!rxr->bnapi->in_reset) { @@ -4362,7 +4352,8 @@ static int bnxt_hwrm_do_send_msg(struct bnxt *bp, void *msg, u32 msg_len, u32 bar_offset = BNXT_GRCPF_REG_CHIMP_COMM; u16 dst = BNXT_HWRM_CHNL_CHIMP; - if (BNXT_NO_FW_ACCESS(bp)) + if (BNXT_NO_FW_ACCESS(bp) && + le16_to_cpu(req->req_type) != HWRM_FUNC_RESET) return -EBUSY; if (msg_len > BNXT_HWRM_MAX_REQ_LEN) { @@ -9789,7 +9780,10 @@ int bnxt_open_nic(struct bnxt *bp, bool irq_re_init, bool link_re_init) { int rc = 0; - rc = __bnxt_open_nic(bp, irq_re_init, link_re_init); + if (test_bit(BNXT_STATE_ABORT_ERR, &bp->state)) + rc = -EIO; + if (!rc) + rc = __bnxt_open_nic(bp, irq_re_init, link_re_init); if (rc) { netdev_err(bp->dev, "nic open fail (rc: %x)\n", rc); dev_close(bp->dev); @@ -12108,15 +12102,17 @@ static void bnxt_remove_one(struct pci_dev *pdev) if (BNXT_PF(bp)) bnxt_sriov_disable(bp); - clear_bit(BNXT_STATE_IN_FW_RESET, &bp->state); - bnxt_cancel_sp_work(bp); - bp->sp_event = 0; - - bnxt_dl_fw_reporters_destroy(bp, true); if (BNXT_PF(bp)) devlink_port_type_clear(&bp->dl_port); pci_disable_pcie_error_reporting(pdev); unregister_netdev(dev); + clear_bit(BNXT_STATE_IN_FW_RESET, &bp->state); + /* Flush any pending tasks */ + cancel_work_sync(&bp->sp_task); + cancel_delayed_work_sync(&bp->fw_reset_task); + bp->sp_event = 0; + + bnxt_dl_fw_reporters_destroy(bp, true); bnxt_dl_unregister(bp); bnxt_shutdown_tc(bp); @@ -12860,6 +12856,9 @@ static pci_ers_result_t bnxt_io_error_detected(struct pci_dev *pdev, return PCI_ERS_RESULT_DISCONNECT; } + if (state == pci_channel_io_frozen) + set_bit(BNXT_STATE_PCI_CHANNEL_IO_FROZEN, &bp->state); + if (netif_running(netdev)) bnxt_close(netdev); @@ -12886,7 +12885,7 @@ static pci_ers_result_t bnxt_io_slot_reset(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct bnxt *bp = netdev_priv(netdev); - int err = 0; + int err = 0, off; pci_ers_result_t result = PCI_ERS_RESULT_DISCONNECT; netdev_info(bp->dev, "PCI Slot Reset\n"); @@ -12898,6 +12897,20 @@ static pci_ers_result_t bnxt_io_slot_reset(struct pci_dev *pdev) "Cannot re-enable PCI device after reset.\n"); } else { pci_set_master(pdev); + /* Upon fatal error, our device internal logic that latches to + * BAR value is getting reset and will restore only upon + * rewritting the BARs. + * + * As pci_restore_state() does not re-write the BARs if the + * value is same as saved value earlier, driver needs to + * write the BARs to 0 to force restore, in case of fatal error. + */ + if (test_and_clear_bit(BNXT_STATE_PCI_CHANNEL_IO_FROZEN, + &bp->state)) { + for (off = PCI_BASE_ADDRESS_0; + off <= PCI_BASE_ADDRESS_5; off += 4) + pci_write_config_dword(bp->pdev, off, 0); + } pci_restore_state(pdev); pci_save_state(pdev); diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index 21ef1c21f602..47b3c3127879 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -1781,6 +1781,7 @@ struct bnxt { #define BNXT_STATE_ABORT_ERR 5 #define BNXT_STATE_FW_FATAL_COND 6 #define BNXT_STATE_DRV_REGISTERED 7 +#define BNXT_STATE_PCI_CHANNEL_IO_FROZEN 8 #define BNXT_NO_FW_ACCESS(bp) \ (test_bit(BNXT_STATE_FW_FATAL_COND, &(bp)->state) || \ diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 883e47c5b1a7..286f0341bdf8 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -1929,7 +1929,8 @@ static inline int macb_clear_csum(struct sk_buff *skb) static int macb_pad_and_fcs(struct sk_buff **skb, struct net_device *ndev) { - bool cloned = skb_cloned(*skb) || skb_header_cloned(*skb); + bool cloned = skb_cloned(*skb) || skb_header_cloned(*skb) || + skb_is_nonlinear(*skb); int padlen = ETH_ZLEN - (*skb)->len; int headroom = skb_headroom(*skb); int tailroom = skb_tailroom(*skb); diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c index 6ec5f2f26f05..4e55f7081644 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c @@ -145,13 +145,13 @@ static int configure_filter_smac(struct adapter *adap, struct filter_entry *f) int err; /* do a set-tcb for smac-sel and CWR bit.. */ - err = set_tcb_tflag(adap, f, f->tid, TF_CCTRL_CWR_S, 1, 1); - if (err) - goto smac_err; - err = set_tcb_field(adap, f, f->tid, TCB_SMAC_SEL_W, TCB_SMAC_SEL_V(TCB_SMAC_SEL_M), TCB_SMAC_SEL_V(f->smt->idx), 1); + if (err) + goto smac_err; + + err = set_tcb_tflag(adap, f, f->tid, TF_CCTRL_CWR_S, 1, 1); if (!err) return 0; @@ -862,6 +862,7 @@ int set_filter_wr(struct adapter *adapter, int fidx) FW_FILTER_WR_DIRSTEERHASH_V(f->fs.dirsteerhash) | FW_FILTER_WR_LPBK_V(f->fs.action == FILTER_SWITCH) | FW_FILTER_WR_DMAC_V(f->fs.newdmac) | + FW_FILTER_WR_SMAC_V(f->fs.newsmac) | FW_FILTER_WR_INSVLAN_V(f->fs.newvlan == VLAN_INSERT || f->fs.newvlan == VLAN_REWRITE) | FW_FILTER_WR_RMVLAN_V(f->fs.newvlan == VLAN_REMOVE || @@ -879,7 +880,7 @@ int set_filter_wr(struct adapter *adapter, int fidx) FW_FILTER_WR_OVLAN_VLD_V(f->fs.val.ovlan_vld) | FW_FILTER_WR_IVLAN_VLDM_V(f->fs.mask.ivlan_vld) | FW_FILTER_WR_OVLAN_VLDM_V(f->fs.mask.ovlan_vld)); - fwr->smac_sel = 0; + fwr->smac_sel = f->smt->idx; fwr->rx_chan_rx_rpl_iq = htons(FW_FILTER_WR_RX_CHAN_V(0) | FW_FILTER_WR_RX_RPL_IQ_V(adapter->sge.fw_evtq.abs_id)); @@ -1323,11 +1324,8 @@ static void mk_act_open_req6(struct filter_entry *f, struct sk_buff *skb, TX_QUEUE_V(f->fs.nat_mode) | T5_OPT_2_VALID_F | RX_CHANNEL_V(cxgb4_port_e2cchan(f->dev)) | - CONG_CNTRL_V((f->fs.action == FILTER_DROP) | - (f->fs.dirsteer << 1)) | PACE_V((f->fs.maskhash) | - ((f->fs.dirsteerhash) << 1)) | - CCTRL_ECN_V(f->fs.action == FILTER_SWITCH)); + ((f->fs.dirsteerhash) << 1))); } static void mk_act_open_req(struct filter_entry *f, struct sk_buff *skb, @@ -1363,11 +1361,8 @@ static void mk_act_open_req(struct filter_entry *f, struct sk_buff *skb, TX_QUEUE_V(f->fs.nat_mode) | T5_OPT_2_VALID_F | RX_CHANNEL_V(cxgb4_port_e2cchan(f->dev)) | - CONG_CNTRL_V((f->fs.action == FILTER_DROP) | - (f->fs.dirsteer << 1)) | PACE_V((f->fs.maskhash) | - ((f->fs.dirsteerhash) << 1)) | - CCTRL_ECN_V(f->fs.action == FILTER_SWITCH)); + ((f->fs.dirsteerhash) << 1))); } static int cxgb4_set_hash_filter(struct net_device *dev, @@ -2039,6 +2034,20 @@ void hash_filter_rpl(struct adapter *adap, const struct cpl_act_open_rpl *rpl) } return; } + switch (f->fs.action) { + case FILTER_PASS: + if (f->fs.dirsteer) + set_tcb_tflag(adap, f, tid, + TF_DIRECT_STEER_S, 1, 1); + break; + case FILTER_DROP: + set_tcb_tflag(adap, f, tid, TF_DROP_S, 1, 1); + break; + case FILTER_SWITCH: + set_tcb_tflag(adap, f, tid, TF_LPBK_S, 1, 1); + break; + } + break; default: @@ -2106,22 +2115,11 @@ void filter_rpl(struct adapter *adap, const struct cpl_set_tcb_rpl *rpl) if (ctx) ctx->result = 0; } else if (ret == FW_FILTER_WR_FLT_ADDED) { - int err = 0; - - if (f->fs.newsmac) - err = configure_filter_smac(adap, f); - - if (!err) { - f->pending = 0; /* async setup completed */ - f->valid = 1; - if (ctx) { - ctx->result = 0; - ctx->tid = idx; - } - } else { - clear_filter(adap, f); - if (ctx) - ctx->result = err; + f->pending = 0; /* async setup completed */ + f->valid = 1; + if (ctx) { + ctx->result = 0; + ctx->tid = idx; } } else { /* Something went wrong. Issue a warning about the diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_tcb.h b/drivers/net/ethernet/chelsio/cxgb4/t4_tcb.h index 50232e063f49..92473dda55d9 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_tcb.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_tcb.h @@ -50,6 +50,10 @@ #define TCB_T_FLAGS_M 0xffffffffffffffffULL #define TCB_T_FLAGS_V(x) ((__u64)(x) << TCB_T_FLAGS_S) +#define TF_DROP_S 22 +#define TF_DIRECT_STEER_S 23 +#define TF_LPBK_S 59 + #define TF_CCTRL_ECE_S 60 #define TF_CCTRL_CWR_S 61 #define TF_CCTRL_RFR_S 62 diff --git a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c index ec4f79049a06..96d561653496 100644 --- a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c +++ b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c @@ -212,7 +212,7 @@ static struct sk_buff *alloc_ctrl_skb(struct sk_buff *skb, int len) { if (likely(skb && !skb_shared(skb) && !skb_cloned(skb))) { __skb_trim(skb, 0); - refcount_add(2, &skb->users); + refcount_inc(&skb->users); } else { skb = alloc_skb(len, GFP_KERNEL | __GFP_NOFAIL); } @@ -772,14 +772,13 @@ static int chtls_pass_open_rpl(struct chtls_dev *cdev, struct sk_buff *skb) if (rpl->status != CPL_ERR_NONE) { pr_info("Unexpected PASS_OPEN_RPL status %u for STID %u\n", rpl->status, stid); - return CPL_RET_BUF_DONE; + } else { + cxgb4_free_stid(cdev->tids, stid, listen_ctx->lsk->sk_family); + sock_put(listen_ctx->lsk); + kfree(listen_ctx); + module_put(THIS_MODULE); } - cxgb4_free_stid(cdev->tids, stid, listen_ctx->lsk->sk_family); - sock_put(listen_ctx->lsk); - kfree(listen_ctx); - module_put(THIS_MODULE); - - return 0; + return CPL_RET_BUF_DONE; } static int chtls_close_listsrv_rpl(struct chtls_dev *cdev, struct sk_buff *skb) @@ -796,15 +795,13 @@ static int chtls_close_listsrv_rpl(struct chtls_dev *cdev, struct sk_buff *skb) if (rpl->status != CPL_ERR_NONE) { pr_info("Unexpected CLOSE_LISTSRV_RPL status %u for STID %u\n", rpl->status, stid); - return CPL_RET_BUF_DONE; + } else { + cxgb4_free_stid(cdev->tids, stid, listen_ctx->lsk->sk_family); + sock_put(listen_ctx->lsk); + kfree(listen_ctx); + module_put(THIS_MODULE); } - - cxgb4_free_stid(cdev->tids, stid, listen_ctx->lsk->sk_family); - sock_put(listen_ctx->lsk); - kfree(listen_ctx); - module_put(THIS_MODULE); - - return 0; + return CPL_RET_BUF_DONE; } static void chtls_purge_wr_queue(struct sock *sk) @@ -1514,7 +1511,6 @@ static void add_to_reap_list(struct sock *sk) struct chtls_sock *csk = sk->sk_user_data; local_bh_disable(); - bh_lock_sock(sk); release_tcp_port(sk); /* release the port immediately */ spin_lock(&reap_list_lock); @@ -1523,7 +1519,6 @@ static void add_to_reap_list(struct sock *sk) if (!csk->passive_reap_next) schedule_work(&reap_task); spin_unlock(&reap_list_lock); - bh_unlock_sock(sk); local_bh_enable(); } diff --git a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_hw.c b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_hw.c index f1820aca0d33..62c829023da5 100644 --- a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_hw.c +++ b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_hw.c @@ -383,6 +383,9 @@ int chtls_setkey(struct chtls_sock *csk, u32 keylen, if (ret) goto out_notcb; + if (unlikely(csk_flag(sk, CSK_ABORT_SHUTDOWN))) + goto out_notcb; + set_wr_txq(skb, CPL_PRIORITY_DATA, csk->tlshws.txqid); csk->wr_credits -= DIV_ROUND_UP(len, 16); csk->wr_unacked += DIV_ROUND_UP(len, 16); diff --git a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_io.c b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_io.c index 9fb5ca6682ea..188d871f6b8c 100644 --- a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_io.c +++ b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_io.c @@ -1585,6 +1585,7 @@ skip_copy: tp->urg_data = 0; if ((avail + offset) >= skb->len) { + struct sk_buff *next_skb; if (ULP_SKB_CB(skb)->flags & ULPCB_FLAG_TLS_HDR) { tp->copied_seq += skb->len; hws->rcvpld = skb->hdr_len; @@ -1595,8 +1596,10 @@ skip_copy: chtls_free_skb(sk, skb); buffers_freed++; hws->copied_seq = 0; - if (copied >= target && - !skb_peek(&sk->sk_receive_queue)) + next_skb = skb_peek(&sk->sk_receive_queue); + if (copied >= target && !next_skb) + break; + if (ULP_SKB_CB(next_skb)->flags & ULPCB_FLAG_TLS_HDR) break; } } while (len > 0); diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c index 06cc863f4dd6..d9c285948fc2 100644 --- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c @@ -174,12 +174,17 @@ MODULE_PARM_DESC(tx_timeout, "The Tx timeout in ms"); #define DPAA_PARSE_RESULTS_SIZE sizeof(struct fman_prs_result) #define DPAA_TIME_STAMP_SIZE 8 #define DPAA_HASH_RESULTS_SIZE 8 +#define DPAA_HWA_SIZE (DPAA_PARSE_RESULTS_SIZE + DPAA_TIME_STAMP_SIZE \ + + DPAA_HASH_RESULTS_SIZE) +#define DPAA_RX_PRIV_DATA_DEFAULT_SIZE (DPAA_TX_PRIV_DATA_SIZE + \ + dpaa_rx_extra_headroom) #ifdef CONFIG_DPAA_ERRATUM_A050385 -#define DPAA_RX_PRIV_DATA_SIZE (DPAA_A050385_ALIGN - (DPAA_PARSE_RESULTS_SIZE\ - + DPAA_TIME_STAMP_SIZE + DPAA_HASH_RESULTS_SIZE)) +#define DPAA_RX_PRIV_DATA_A050385_SIZE (DPAA_A050385_ALIGN - DPAA_HWA_SIZE) +#define DPAA_RX_PRIV_DATA_SIZE (fman_has_errata_a050385() ? \ + DPAA_RX_PRIV_DATA_A050385_SIZE : \ + DPAA_RX_PRIV_DATA_DEFAULT_SIZE) #else -#define DPAA_RX_PRIV_DATA_SIZE (u16)(DPAA_TX_PRIV_DATA_SIZE + \ - dpaa_rx_extra_headroom) +#define DPAA_RX_PRIV_DATA_SIZE DPAA_RX_PRIV_DATA_DEFAULT_SIZE #endif #define DPAA_ETH_PCD_RXQ_NUM 128 @@ -2840,7 +2845,8 @@ out_error: return err; } -static inline u16 dpaa_get_headroom(struct dpaa_buffer_layout *bl) +static u16 dpaa_get_headroom(struct dpaa_buffer_layout *bl, + enum port_type port) { u16 headroom; @@ -2854,10 +2860,12 @@ static inline u16 dpaa_get_headroom(struct dpaa_buffer_layout *bl) * * Also make sure the headroom is a multiple of data_align bytes */ - headroom = (u16)(bl->priv_data_size + DPAA_PARSE_RESULTS_SIZE + - DPAA_TIME_STAMP_SIZE + DPAA_HASH_RESULTS_SIZE); + headroom = (u16)(bl[port].priv_data_size + DPAA_HWA_SIZE); - return ALIGN(headroom, DPAA_FD_DATA_ALIGNMENT); + if (port == RX) + return ALIGN(headroom, DPAA_FD_RX_DATA_ALIGNMENT); + else + return ALIGN(headroom, DPAA_FD_DATA_ALIGNMENT); } static int dpaa_eth_probe(struct platform_device *pdev) @@ -3025,8 +3033,8 @@ static int dpaa_eth_probe(struct platform_device *pdev) goto free_dpaa_fqs; } - priv->tx_headroom = dpaa_get_headroom(&priv->buf_layout[TX]); - priv->rx_headroom = dpaa_get_headroom(&priv->buf_layout[RX]); + priv->tx_headroom = dpaa_get_headroom(priv->buf_layout, TX); + priv->rx_headroom = dpaa_get_headroom(priv->buf_layout, RX); /* All real interfaces need their ports initialized */ err = dpaa_eth_init_ports(mac_dev, dpaa_bp, &port_fqs, diff --git a/drivers/net/ethernet/freescale/enetc/enetc_qos.c b/drivers/net/ethernet/freescale/enetc/enetc_qos.c index c81be32bcedf..827f74e86d34 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_qos.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_qos.c @@ -402,7 +402,7 @@ struct enetc_psfp_gate { u32 num_entries; refcount_t refcount; struct hlist_node node; - struct action_gate_entry entries[0]; + struct action_gate_entry entries[]; }; /* Only enable the green color frame now diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h index 832a2175636d..c527f4ee1d3a 100644 --- a/drivers/net/ethernet/freescale/fec.h +++ b/drivers/net/ethernet/freescale/fec.h @@ -456,6 +456,12 @@ struct bufdesc_ex { */ #define FEC_QUIRK_HAS_FRREG (1 << 16) +/* Some FEC hardware blocks need the MMFR cleared at setup time to avoid + * the generation of an MII event. This must be avoided in the older + * FEC blocks where it will stop MII events being generated. + */ +#define FEC_QUIRK_CLEAR_SETUP_MII (1 << 17) + struct bufdesc_prop { int qid; /* Address of Rx and Tx buffers */ diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 8f7eca1e7716..d7919555250d 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -100,14 +100,14 @@ static const struct fec_devinfo fec_imx27_info = { static const struct fec_devinfo fec_imx28_info = { .quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME | FEC_QUIRK_SINGLE_MDIO | FEC_QUIRK_HAS_RACC | - FEC_QUIRK_HAS_FRREG, + FEC_QUIRK_HAS_FRREG | FEC_QUIRK_CLEAR_SETUP_MII, }; static const struct fec_devinfo fec_imx6q_info = { .quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT | FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM | FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR006358 | - FEC_QUIRK_HAS_RACC, + FEC_QUIRK_HAS_RACC | FEC_QUIRK_CLEAR_SETUP_MII, }; static const struct fec_devinfo fec_mvf600_info = { @@ -119,7 +119,8 @@ static const struct fec_devinfo fec_imx6x_info = { FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM | FEC_QUIRK_HAS_VLAN | FEC_QUIRK_HAS_AVB | FEC_QUIRK_ERR007885 | FEC_QUIRK_BUG_CAPTURE | - FEC_QUIRK_HAS_RACC | FEC_QUIRK_HAS_COALESCE, + FEC_QUIRK_HAS_RACC | FEC_QUIRK_HAS_COALESCE | + FEC_QUIRK_CLEAR_SETUP_MII, }; static const struct fec_devinfo fec_imx6ul_info = { @@ -127,7 +128,7 @@ static const struct fec_devinfo fec_imx6ul_info = { FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM | FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR007885 | FEC_QUIRK_BUG_CAPTURE | FEC_QUIRK_HAS_RACC | - FEC_QUIRK_HAS_COALESCE, + FEC_QUIRK_HAS_COALESCE | FEC_QUIRK_CLEAR_SETUP_MII, }; static struct platform_device_id fec_devtype[] = { @@ -2134,15 +2135,17 @@ static int fec_enet_mii_init(struct platform_device *pdev) if (suppress_preamble) fep->phy_speed |= BIT(7); - /* Clear MMFR to avoid to generate MII event by writing MSCR. - * MII event generation condition: - * - writing MSCR: - * - mmfr[31:0]_not_zero & mscr[7:0]_is_zero & - * mscr_reg_data_in[7:0] != 0 - * - writing MMFR: - * - mscr[7:0]_not_zero - */ - writel(0, fep->hwp + FEC_MII_DATA); + if (fep->quirks & FEC_QUIRK_CLEAR_SETUP_MII) { + /* Clear MMFR to avoid to generate MII event by writing MSCR. + * MII event generation condition: + * - writing MSCR: + * - mmfr[31:0]_not_zero & mscr[7:0]_is_zero & + * mscr_reg_data_in[7:0] != 0 + * - writing MMFR: + * - mscr[7:0]_not_zero + */ + writel(0, fep->hwp + FEC_MII_DATA); + } writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 41dd3d0f3452..d391a45cebb6 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -1829,20 +1829,12 @@ static netdev_tx_t gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) fcb_len = GMAC_FCB_LEN + GMAC_TXPAL_LEN; /* make space for additional header when fcb is needed */ - if (fcb_len && unlikely(skb_headroom(skb) < fcb_len)) { - struct sk_buff *skb_new; - - skb_new = skb_realloc_headroom(skb, fcb_len); - if (!skb_new) { + if (fcb_len) { + if (unlikely(skb_cow_head(skb, fcb_len))) { dev->stats.tx_errors++; dev_kfree_skb_any(skb); return NETDEV_TX_OK; } - - if (skb->sk) - skb_set_owner_w(skb_new, skb->sk); - dev_consume_skb_any(skb); - skb = skb_new; } /* total number of fragments in the SKB */ @@ -3380,7 +3372,7 @@ static int gfar_probe(struct platform_device *ofdev) if (dev->features & NETIF_F_IP_CSUM || priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER) - dev->needed_headroom = GMAC_FCB_LEN; + dev->needed_headroom = GMAC_FCB_LEN + GMAC_TXPAL_LEN; /* Initializing some of the rx/tx queue level parameters */ for (i = 0; i < priv->num_tx_queues; i++) { diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c index 714b501be7d0..ba8869c3d891 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.c +++ b/drivers/net/ethernet/freescale/ucc_geth.c @@ -1358,7 +1358,7 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth) (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) { upsmr |= UCC_GETH_UPSMR_TBIM; } - if ((ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII)) + if (ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII) upsmr |= UCC_GETH_UPSMR_SGMM; out_be32(&uf_regs->upsmr, upsmr); diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h index 281de8326bc5..015796a20118 100644 --- a/drivers/net/ethernet/google/gve/gve_adminq.h +++ b/drivers/net/ethernet/google/gve/gve_adminq.h @@ -198,7 +198,7 @@ static_assert(sizeof(struct stats) == 16); struct gve_stats_report { __be64 written_count; - struct stats stats[0]; + struct stats stats[]; }; static_assert(sizeof(struct gve_stats_report) == 8); diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c index 48a433154ce0..02e7d74779f4 100644 --- a/drivers/net/ethernet/google/gve/gve_main.c +++ b/drivers/net/ethernet/google/gve/gve_main.c @@ -116,9 +116,8 @@ static int gve_alloc_stats_report(struct gve_priv *priv) priv->tx_cfg.num_queues; rx_stats_num = (GVE_RX_STATS_REPORT_NUM + NIC_RX_STATS_REPORT_NUM) * priv->rx_cfg.num_queues; - priv->stats_report_len = sizeof(struct gve_stats_report) + - (tx_stats_num + rx_stats_num) * - sizeof(struct stats); + priv->stats_report_len = struct_size(priv->stats_report, stats, + tx_stats_num + rx_stats_num); priv->stats_report = dma_alloc_coherent(&priv->pdev->dev, priv->stats_report_len, &priv->stats_report_bus, GFP_KERNEL); diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c index 15f69fa86323..e8495f58a1a8 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c @@ -1373,7 +1373,7 @@ static int hclge_tm_bp_setup(struct hclge_dev *hdev) return ret; } - return ret; + return 0; } int hclge_pause_setup_hw(struct hclge_dev *hdev, bool init) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index 50c84c5e65d2..c8e3fdd5999c 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -3262,8 +3262,8 @@ static void hclgevf_uninit_hdev(struct hclgevf_dev *hdev) hclgevf_uninit_msi(hdev); } - hclgevf_pci_uninit(hdev); hclgevf_cmd_uninit(hdev); + hclgevf_pci_uninit(hdev); hclgevf_uninit_mac_list(hdev); } diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c index 7ef3369953b6..c3ec9ceed833 100644 --- a/drivers/net/ethernet/ibm/ibmveth.c +++ b/drivers/net/ethernet/ibm/ibmveth.c @@ -1031,12 +1031,6 @@ static int ibmveth_is_packet_unsupported(struct sk_buff *skb, ret = -EOPNOTSUPP; } - if (!ether_addr_equal(ether_header->h_source, netdev->dev_addr)) { - netdev_dbg(netdev, "source packet MAC address does not match veth device's, dropping packet.\n"); - netdev->stats.tx_dropped++; - ret = -EOPNOTSUPP; - } - return ret; } diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 8148f796a807..da15913879f8 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1185,18 +1185,27 @@ static int ibmvnic_open(struct net_device *netdev) if (adapter->state != VNIC_CLOSED) { rc = ibmvnic_login(netdev); if (rc) - return rc; + goto out; rc = init_resources(adapter); if (rc) { netdev_err(netdev, "failed to initialize resources\n"); release_resources(adapter); - return rc; + goto out; } } rc = __ibmvnic_open(netdev); +out: + /* + * If open fails due to a pending failover, set device state and + * return. Device operation will be handled by reset routine. + */ + if (rc && adapter->failover_pending) { + adapter->state = VNIC_OPEN; + rc = 0; + } return rc; } @@ -1815,9 +1824,13 @@ static int ibmvnic_set_mac(struct net_device *netdev, void *p) int rc; rc = 0; - ether_addr_copy(adapter->mac_addr, addr->sa_data); - if (adapter->state != VNIC_PROBED) + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + if (adapter->state != VNIC_PROBED) { + ether_addr_copy(adapter->mac_addr, addr->sa_data); rc = __ibmvnic_set_mac(netdev, addr->sa_data); + } return rc; } @@ -1918,6 +1931,13 @@ static int do_reset(struct ibmvnic_adapter *adapter, rwi->reset_reason); rtnl_lock(); + /* + * Now that we have the rtnl lock, clear any pending failover. + * This will ensure ibmvnic_open() has either completed or will + * block until failover is complete. + */ + if (rwi->reset_reason == VNIC_RESET_FAILOVER) + adapter->failover_pending = false; netif_carrier_off(netdev); adapter->reset_reason = rwi->reset_reason; @@ -2198,6 +2218,13 @@ static void __ibmvnic_reset(struct work_struct *work) /* CHANGE_PARAM requestor holds rtnl_lock */ rc = do_change_param_reset(adapter, rwi, reset_state); } else if (adapter->force_reset_recovery) { + /* + * Since we are doing a hard reset now, clear the + * failover_pending flag so we don't ignore any + * future MOBILITY or other resets. + */ + adapter->failover_pending = false; + /* Transport event occurred during previous reset */ if (adapter->wait_for_reset) { /* Previous was CHANGE_PARAM; caller locked */ @@ -2262,9 +2289,15 @@ static int ibmvnic_reset(struct ibmvnic_adapter *adapter, unsigned long flags; int ret; + /* + * If failover is pending don't schedule any other reset. + * Instead let the failover complete. If there is already a + * a failover reset scheduled, we will detect and drop the + * duplicate reset when walking the ->rwi_list below. + */ if (adapter->state == VNIC_REMOVING || adapter->state == VNIC_REMOVED || - adapter->failover_pending) { + (adapter->failover_pending && reason != VNIC_RESET_FAILOVER)) { ret = EBUSY; netdev_dbg(netdev, "Adapter removing or pending failover, skipping reset\n"); goto err; @@ -4709,7 +4742,6 @@ static void ibmvnic_handle_crq(union ibmvnic_crq *crq, case IBMVNIC_CRQ_INIT: dev_info(dev, "Partner initialized\n"); adapter->from_passive_init = true; - adapter->failover_pending = false; if (!completion_done(&adapter->init_done)) { complete(&adapter->init_done); adapter->init_done_rc = -EIO; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/mlx5.h b/drivers/net/ethernet/mellanox/mlx5/core/lib/mlx5.h index d046db7bb047..3a9fa629503f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lib/mlx5.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/mlx5.h @@ -90,9 +90,4 @@ int mlx5_create_encryption_key(struct mlx5_core_dev *mdev, u32 key_type, u32 *p_key_id); void mlx5_destroy_encryption_key(struct mlx5_core_dev *mdev, u32 key_id); -static inline struct net *mlx5_core_net(struct mlx5_core_dev *dev) -{ - return devlink_net(priv_to_devlink(dev)); -} - #endif diff --git a/drivers/net/ethernet/mellanox/mlxsw/core.c b/drivers/net/ethernet/mellanox/mlxsw/core.c index 7f77c2a71d1c..937b8e46f8c7 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/core.c +++ b/drivers/net/ethernet/mellanox/mlxsw/core.c @@ -620,6 +620,9 @@ static void mlxsw_emad_transmit_retry(struct mlxsw_core *mlxsw_core, err = mlxsw_emad_transmit(trans->core, trans); if (err == 0) return; + + if (!atomic_dec_and_test(&trans->active)) + return; } else { err = -EIO; } @@ -2064,6 +2067,8 @@ void mlxsw_core_bus_device_unregister(struct mlxsw_core *mlxsw_core, if (!reload) devlink_resources_unregister(devlink, NULL); mlxsw_core->bus->fini(mlxsw_core->bus_priv); + if (!reload) + devlink_free(devlink); return; diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 16b47fce540b..b08853f71b2b 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -1174,11 +1174,14 @@ mlxsw_sp_port_speed_by_width_set(struct mlxsw_sp_port *mlxsw_sp_port) u32 eth_proto_cap, eth_proto_admin, eth_proto_oper; const struct mlxsw_sp_port_type_speed_ops *ops; char ptys_pl[MLXSW_REG_PTYS_LEN]; + u32 eth_proto_cap_masked; int err; ops = mlxsw_sp->port_type_speed_ops; - /* Set advertised speeds to supported speeds. */ + /* Set advertised speeds to speeds supported by both the driver + * and the device. + */ ops->reg_ptys_eth_pack(mlxsw_sp, ptys_pl, mlxsw_sp_port->local_port, 0, false); err = mlxsw_reg_query(mlxsw_sp->core, MLXSW_REG(ptys), ptys_pl); @@ -1187,8 +1190,10 @@ mlxsw_sp_port_speed_by_width_set(struct mlxsw_sp_port *mlxsw_sp_port) ops->reg_ptys_eth_unpack(mlxsw_sp, ptys_pl, ð_proto_cap, ð_proto_admin, ð_proto_oper); + eth_proto_cap_masked = ops->ptys_proto_cap_masked_get(eth_proto_cap); ops->reg_ptys_eth_pack(mlxsw_sp, ptys_pl, mlxsw_sp_port->local_port, - eth_proto_cap, mlxsw_sp_port->link.autoneg); + eth_proto_cap_masked, + mlxsw_sp_port->link.autoneg); return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ptys), ptys_pl); } diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h index 3e26eb6cb140..74b3959b36d4 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h @@ -342,6 +342,7 @@ struct mlxsw_sp_port_type_speed_ops { u32 *p_eth_proto_cap, u32 *p_eth_proto_admin, u32 *p_eth_proto_oper); + u32 (*ptys_proto_cap_masked_get)(u32 eth_proto_cap); }; static inline struct net_device * diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c index 2096b6478958..540616469e28 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c @@ -1303,6 +1303,20 @@ mlxsw_sp1_reg_ptys_eth_unpack(struct mlxsw_sp *mlxsw_sp, char *payload, p_eth_proto_oper); } +static u32 mlxsw_sp1_ptys_proto_cap_masked_get(u32 eth_proto_cap) +{ + u32 ptys_proto_cap_masked = 0; + int i; + + for (i = 0; i < MLXSW_SP1_PORT_LINK_MODE_LEN; i++) { + if (mlxsw_sp1_port_link_mode[i].mask & eth_proto_cap) + ptys_proto_cap_masked |= + mlxsw_sp1_port_link_mode[i].mask; + } + + return ptys_proto_cap_masked; +} + const struct mlxsw_sp_port_type_speed_ops mlxsw_sp1_port_type_speed_ops = { .from_ptys_supported_port = mlxsw_sp1_from_ptys_supported_port, .from_ptys_link = mlxsw_sp1_from_ptys_link, @@ -1313,6 +1327,7 @@ const struct mlxsw_sp_port_type_speed_ops mlxsw_sp1_port_type_speed_ops = { .to_ptys_speed = mlxsw_sp1_to_ptys_speed, .reg_ptys_eth_pack = mlxsw_sp1_reg_ptys_eth_pack, .reg_ptys_eth_unpack = mlxsw_sp1_reg_ptys_eth_unpack, + .ptys_proto_cap_masked_get = mlxsw_sp1_ptys_proto_cap_masked_get, }; static const enum ethtool_link_mode_bit_indices @@ -1731,6 +1746,20 @@ mlxsw_sp2_reg_ptys_eth_unpack(struct mlxsw_sp *mlxsw_sp, char *payload, p_eth_proto_admin, p_eth_proto_oper); } +static u32 mlxsw_sp2_ptys_proto_cap_masked_get(u32 eth_proto_cap) +{ + u32 ptys_proto_cap_masked = 0; + int i; + + for (i = 0; i < MLXSW_SP2_PORT_LINK_MODE_LEN; i++) { + if (mlxsw_sp2_port_link_mode[i].mask & eth_proto_cap) + ptys_proto_cap_masked |= + mlxsw_sp2_port_link_mode[i].mask; + } + + return ptys_proto_cap_masked; +} + const struct mlxsw_sp_port_type_speed_ops mlxsw_sp2_port_type_speed_ops = { .from_ptys_supported_port = mlxsw_sp2_from_ptys_supported_port, .from_ptys_link = mlxsw_sp2_from_ptys_link, @@ -1741,4 +1770,5 @@ const struct mlxsw_sp_port_type_speed_ops mlxsw_sp2_port_type_speed_ops = { .to_ptys_speed = mlxsw_sp2_to_ptys_speed, .reg_ptys_eth_pack = mlxsw_sp2_reg_ptys_eth_pack, .reg_ptys_eth_unpack = mlxsw_sp2_reg_ptys_eth_unpack, + .ptys_proto_cap_masked_get = mlxsw_sp2_ptys_proto_cap_masked_get, }; diff --git a/drivers/net/ethernet/pensando/ionic/ionic_dev.c b/drivers/net/ethernet/pensando/ionic/ionic_dev.c index 545c99b15df8..dc5fbc2704f3 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_dev.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_dev.c @@ -333,7 +333,7 @@ int ionic_set_vf_config(struct ionic *ionic, int vf, u8 attr, u8 *data) union ionic_dev_cmd cmd = { .vf_setattr.opcode = IONIC_CMD_VF_SETATTR, .vf_setattr.attr = attr, - .vf_setattr.vf_index = vf, + .vf_setattr.vf_index = cpu_to_le16(vf), }; int err; @@ -391,7 +391,7 @@ void ionic_dev_cmd_queue_identify(struct ionic_dev *idev, { union ionic_dev_cmd cmd = { .q_identify.opcode = IONIC_CMD_Q_IDENTIFY, - .q_identify.lif_type = lif_type, + .q_identify.lif_type = cpu_to_le16(lif_type), .q_identify.type = qtype, .q_identify.ver = qver, }; diff --git a/drivers/net/ethernet/pensando/ionic/ionic_dev.h b/drivers/net/ethernet/pensando/ionic/ionic_dev.h index c109cd5a0471..6c243b17312c 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_dev.h +++ b/drivers/net/ethernet/pensando/ionic/ionic_dev.h @@ -29,6 +29,7 @@ struct ionic_dev_bar { int res_index; }; +#ifndef __CHECKER__ /* Registers */ static_assert(sizeof(struct ionic_intr) == 32); @@ -119,6 +120,7 @@ static_assert(sizeof(struct ionic_vf_setattr_cmd) == 64); static_assert(sizeof(struct ionic_vf_setattr_comp) == 16); static_assert(sizeof(struct ionic_vf_getattr_cmd) == 64); static_assert(sizeof(struct ionic_vf_getattr_comp) == 16); +#endif /* __CHECKER__ */ struct ionic_devinfo { u8 asic_type; diff --git a/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c b/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c index ed9808fc743b..35c72d4a78b3 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c @@ -126,6 +126,11 @@ static int ionic_get_link_ksettings(struct net_device *netdev, ethtool_link_ksettings_zero_link_mode(ks, supported); + if (!idev->port_info) { + netdev_err(netdev, "port_info not initialized\n"); + return -EOPNOTSUPP; + } + /* The port_info data is found in a DMA space that the NIC keeps * up-to-date, so there's no need to request the data from the * NIC, we already have it in our memory space. diff --git a/drivers/net/ethernet/pensando/ionic/ionic_fw.c b/drivers/net/ethernet/pensando/ionic/ionic_fw.c index f492ae406a60..d7bbf336c6f6 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_fw.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_fw.c @@ -27,9 +27,9 @@ static void ionic_dev_cmd_firmware_download(struct ionic_dev *idev, u64 addr, { union ionic_dev_cmd cmd = { .fw_download.opcode = IONIC_CMD_FW_DOWNLOAD, - .fw_download.offset = offset, - .fw_download.addr = addr, - .fw_download.length = length + .fw_download.offset = cpu_to_le32(offset), + .fw_download.addr = cpu_to_le64(addr), + .fw_download.length = cpu_to_le32(length), }; ionic_dev_cmd_go(idev, &cmd); diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c index d655a7ae3058..a12df3946a07 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c @@ -1656,7 +1656,6 @@ static void ionic_txrx_deinit(struct ionic_lif *lif) if (lif->rxqcqs) { for (i = 0; i < lif->nxqs && lif->rxqcqs[i]; i++) { ionic_lif_qcq_deinit(lif, lif->rxqcqs[i]); - ionic_rx_flush(&lif->rxqcqs[i]->cq); ionic_rx_empty(&lif->rxqcqs[i]->q); } } @@ -1915,11 +1914,11 @@ static int ionic_get_vf_config(struct net_device *netdev, ret = -EINVAL; } else { ivf->vf = vf; - ivf->vlan = ionic->vfs[vf].vlanid; + ivf->vlan = le16_to_cpu(ionic->vfs[vf].vlanid); ivf->qos = 0; ivf->spoofchk = ionic->vfs[vf].spoofchk; ivf->linkstate = ionic->vfs[vf].linkstate; - ivf->max_tx_rate = ionic->vfs[vf].maxrate; + ivf->max_tx_rate = le32_to_cpu(ionic->vfs[vf].maxrate); ivf->trusted = ionic->vfs[vf].trusted; ether_addr_copy(ivf->mac, ionic->vfs[vf].macaddr); } @@ -2019,7 +2018,7 @@ static int ionic_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, ret = ionic_set_vf_config(ionic, vf, IONIC_VF_ATTR_VLAN, (u8 *)&vlan); if (!ret) - ionic->vfs[vf].vlanid = vlan; + ionic->vfs[vf].vlanid = cpu_to_le16(vlan); } up_write(&ionic->vf_op_lock); @@ -2048,7 +2047,7 @@ static int ionic_set_vf_rate(struct net_device *netdev, int vf, ret = ionic_set_vf_config(ionic, vf, IONIC_VF_ATTR_RATE, (u8 *)&tx_max); if (!ret) - lif->ionic->vfs[vf].maxrate = tx_max; + lif->ionic->vfs[vf].maxrate = cpu_to_le32(tx_max); } up_write(&ionic->vf_op_lock); @@ -2981,14 +2980,14 @@ void ionic_lif_unregister(struct ionic_lif *lif) static void ionic_lif_queue_identify(struct ionic_lif *lif) { + union ionic_q_identity __iomem *q_ident; struct ionic *ionic = lif->ionic; - union ionic_q_identity *q_ident; struct ionic_dev *idev; int qtype; int err; idev = &lif->ionic->idev; - q_ident = (union ionic_q_identity *)&idev->dev_cmd_regs->data; + q_ident = (union ionic_q_identity __iomem *)&idev->dev_cmd_regs->data; for (qtype = 0; qtype < ARRAY_SIZE(ionic_qtype_versions); qtype++) { struct ionic_qtype_info *qti = &lif->qtype_info[qtype]; @@ -3011,14 +3010,14 @@ static void ionic_lif_queue_identify(struct ionic_lif *lif) ionic_qtype_versions[qtype]); err = ionic_dev_cmd_wait(ionic, DEVCMD_TIMEOUT); if (!err) { - qti->version = q_ident->version; - qti->supported = q_ident->supported; - qti->features = le64_to_cpu(q_ident->features); - qti->desc_sz = le16_to_cpu(q_ident->desc_sz); - qti->comp_sz = le16_to_cpu(q_ident->comp_sz); - qti->sg_desc_sz = le16_to_cpu(q_ident->sg_desc_sz); - qti->max_sg_elems = le16_to_cpu(q_ident->max_sg_elems); - qti->sg_desc_stride = le16_to_cpu(q_ident->sg_desc_stride); + qti->version = readb(&q_ident->version); + qti->supported = readb(&q_ident->supported); + qti->features = readq(&q_ident->features); + qti->desc_sz = readw(&q_ident->desc_sz); + qti->comp_sz = readw(&q_ident->comp_sz); + qti->sg_desc_sz = readw(&q_ident->sg_desc_sz); + qti->max_sg_elems = readw(&q_ident->max_sg_elems); + qti->sg_desc_stride = readw(&q_ident->sg_desc_stride); } mutex_unlock(&ionic->dev_cmd_lock); diff --git a/drivers/net/ethernet/pensando/ionic/ionic_main.c b/drivers/net/ethernet/pensando/ionic/ionic_main.c index ee0740881af3..d355676f6c16 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_main.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_main.c @@ -311,7 +311,7 @@ int ionic_adminq_post_wait(struct ionic_lif *lif, struct ionic_admin_ctx *ctx) static void ionic_dev_cmd_clean(struct ionic *ionic) { - union ionic_dev_cmd_regs *regs = ionic->idev.dev_cmd_regs; + union __iomem ionic_dev_cmd_regs *regs = ionic->idev.dev_cmd_regs; iowrite32(0, ®s->doorbell); memset_io(®s->cmd, 0, sizeof(regs->cmd)); @@ -333,7 +333,7 @@ int ionic_dev_cmd_wait(struct ionic *ionic, unsigned long max_seconds) */ max_wait = jiffies + (max_seconds * HZ); try_again: - opcode = idev->dev_cmd_regs->cmd.cmd.opcode; + opcode = readb(&idev->dev_cmd_regs->cmd.cmd.opcode); start_time = jiffies; do { done = ionic_dev_cmd_done(idev); diff --git a/drivers/net/ethernet/pensando/ionic/ionic_stats.h b/drivers/net/ethernet/pensando/ionic/ionic_stats.h index 3f543512616e..2a725834f792 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_stats.h +++ b/drivers/net/ethernet/pensando/ionic/ionic_stats.h @@ -49,7 +49,7 @@ extern const int ionic_num_stats_grps; (*((u64 *)(((u8 *)(base_ptr)) + (desc_ptr)->offset))) #define IONIC_READ_STAT_LE64(base_ptr, desc_ptr) \ - __le64_to_cpu(*((u64 *)(((u8 *)(base_ptr)) + (desc_ptr)->offset))) + __le64_to_cpu(*((__le64 *)(((u8 *)(base_ptr)) + (desc_ptr)->offset))) struct ionic_stat_desc { char name[ETH_GSTRING_LEN]; diff --git a/drivers/net/ethernet/pensando/ionic/ionic_txrx.c b/drivers/net/ethernet/pensando/ionic/ionic_txrx.c index 169ac4f54640..b3d2250c77d0 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_txrx.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_txrx.c @@ -200,7 +200,7 @@ static void ionic_rx_clean(struct ionic_queue *q, if (likely(netdev->features & NETIF_F_RXCSUM)) { if (comp->csum_flags & IONIC_RXQ_COMP_CSUM_F_CALC) { skb->ip_summed = CHECKSUM_COMPLETE; - skb->csum = (__wsum)le16_to_cpu(comp->csum); + skb->csum = (__force __wsum)le16_to_cpu(comp->csum); stats->csum_complete++; } } else { @@ -253,19 +253,6 @@ static bool ionic_rx_service(struct ionic_cq *cq, struct ionic_cq_info *cq_info) return true; } -void ionic_rx_flush(struct ionic_cq *cq) -{ - struct ionic_dev *idev = &cq->lif->ionic->idev; - u32 work_done; - - work_done = ionic_cq_service(cq, cq->num_descs, - ionic_rx_service, NULL, NULL); - - if (work_done) - ionic_intr_credits(idev->intr_ctrl, cq->bound_intr->index, - work_done, IONIC_INTR_CRED_RESET_COALESCE); -} - static int ionic_rx_page_alloc(struct ionic_queue *q, struct ionic_page_info *page_info) { @@ -413,22 +400,20 @@ static void ionic_rx_fill_cb(void *arg) void ionic_rx_empty(struct ionic_queue *q) { struct ionic_desc_info *desc_info; - struct ionic_rxq_desc *desc; - unsigned int i; - u16 idx; - - idx = q->tail_idx; - while (idx != q->head_idx) { - desc_info = &q->info[idx]; - desc = desc_info->desc; - desc->addr = 0; - desc->len = 0; + struct ionic_page_info *page_info; + unsigned int i, j; - for (i = 0; i < desc_info->npages; i++) - ionic_rx_page_free(q, &desc_info->pages[i]); + for (i = 0; i < q->num_descs; i++) { + desc_info = &q->info[i]; + for (j = 0; j < IONIC_RX_MAX_SG_ELEMS + 1; j++) { + page_info = &desc_info->pages[j]; + if (page_info->page) + ionic_rx_page_free(q, page_info); + } + desc_info->npages = 0; + desc_info->cb = NULL; desc_info->cb_arg = NULL; - idx = (idx + 1) & (q->num_descs - 1); } } @@ -812,6 +797,7 @@ static int ionic_tx_tso(struct ionic_queue *q, struct sk_buff *skb) skb_frag_t *frag; bool start, done; bool outer_csum; + dma_addr_t addr; bool has_vlan; u16 desc_len; u8 desc_nsge; @@ -893,11 +879,10 @@ static int ionic_tx_tso(struct ionic_queue *q, struct sk_buff *skb) if (frag_left > 0) { len = min(frag_left, left); frag_left -= len; - elem->addr = - cpu_to_le64(ionic_tx_map_frag(q, frag, - offset, len)); - if (dma_mapping_error(dev, elem->addr)) + addr = ionic_tx_map_frag(q, frag, offset, len); + if (dma_mapping_error(dev, addr)) goto err_out_abort; + elem->addr = cpu_to_le64(addr); elem->len = cpu_to_le16(len); elem++; desc_nsge++; diff --git a/drivers/net/ethernet/pensando/ionic/ionic_txrx.h b/drivers/net/ethernet/pensando/ionic/ionic_txrx.h index a5883be0413f..7667b72232b8 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_txrx.h +++ b/drivers/net/ethernet/pensando/ionic/ionic_txrx.h @@ -4,7 +4,6 @@ #ifndef _IONIC_TXRX_H_ #define _IONIC_TXRX_H_ -void ionic_rx_flush(struct ionic_cq *cq); void ionic_tx_flush(struct ionic_cq *cq); void ionic_rx_fill(struct ionic_queue *q); diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 3b6ddc706e92..7766d73823eb 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -4080,9 +4080,17 @@ err_out: return -EIO; } -static bool rtl_test_hw_pad_bug(struct rtl8169_private *tp, struct sk_buff *skb) +static bool rtl_test_hw_pad_bug(struct rtl8169_private *tp) { - return skb->len < ETH_ZLEN && tp->mac_version == RTL_GIGA_MAC_VER_34; + switch (tp->mac_version) { + case RTL_GIGA_MAC_VER_34: + case RTL_GIGA_MAC_VER_60: + case RTL_GIGA_MAC_VER_61: + case RTL_GIGA_MAC_VER_63: + return true; + default: + return false; + } } static void rtl8169_tso_csum_v1(struct sk_buff *skb, u32 *opts) @@ -4154,7 +4162,7 @@ static bool rtl8169_tso_csum_v2(struct rtl8169_private *tp, opts[1] |= transport_offset << TCPHO_SHIFT; } else { - if (unlikely(rtl_test_hw_pad_bug(tp, skb))) + if (unlikely(skb->len < ETH_ZLEN && rtl_test_hw_pad_bug(tp))) return !eth_skb_pad(skb); } @@ -4573,7 +4581,7 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) } rtl_irq_disable(tp); - napi_schedule_irqoff(&tp->napi); + napi_schedule(&tp->napi); out: rtl_ack_events(tp, status); @@ -4746,7 +4754,7 @@ static int rtl_open(struct net_device *dev) rtl_request_firmware(tp); retval = request_irq(pci_irq_vector(pdev, 0), rtl8169_interrupt, - IRQF_NO_THREAD | IRQF_SHARED, dev->name, tp); + IRQF_SHARED, dev->name, tp); if (retval < 0) goto err_release_fw_2; diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 9c4df4ede011..bd30505fbc57 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1744,12 +1744,16 @@ static int ravb_hwtstamp_get(struct net_device *ndev, struct ifreq *req) config.flags = 0; config.tx_type = priv->tstamp_tx_ctrl ? HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF; - if (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE_V2_L2_EVENT) + switch (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE) { + case RAVB_RXTSTAMP_TYPE_V2_L2_EVENT: config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; - else if (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE_ALL) + break; + case RAVB_RXTSTAMP_TYPE_ALL: config.rx_filter = HWTSTAMP_FILTER_ALL; - else + break; + default: config.rx_filter = HWTSTAMP_FILTER_NONE; + } return copy_to_user(req->ifr_data, &config, sizeof(config)) ? -EFAULT : 0; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c index b6e5e3e36b63..81ee0a071b4e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c @@ -625,13 +625,6 @@ static int intel_eth_pci_probe(struct pci_dev *pdev, if (ret) return ret; - if (plat->eee_usecs_rate > 0) { - u32 tx_lpi_usec; - - tx_lpi_usec = (plat->eee_usecs_rate / 1000000) - 1; - writel(tx_lpi_usec, res.addr + GMAC_1US_TIC_COUNTER); - } - ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); if (ret < 0) return ret; @@ -641,6 +634,13 @@ static int intel_eth_pci_probe(struct pci_dev *pdev, res.wol_irq = pci_irq_vector(pdev, 0); res.irq = pci_irq_vector(pdev, 0); + if (plat->eee_usecs_rate > 0) { + u32 tx_lpi_usec; + + tx_lpi_usec = (plat->eee_usecs_rate / 1000000) - 1; + writel(tx_lpi_usec, res.addr + GMAC_1US_TIC_COUNTER); + } + ret = stmmac_dvr_probe(&pdev->dev, plat, &res); if (ret) { pci_free_irq_vectors(pdev); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 220626a8d499..d833908b660a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -4757,6 +4757,7 @@ static void stmmac_napi_add(struct net_device *dev) ch->priv_data = priv; ch->index = queue; + spin_lock_init(&ch->lock); if (queue < priv->plat->rx_queues_to_use) { netif_napi_add(dev, &ch->rx_napi, stmmac_napi_poll_rx, diff --git a/drivers/net/ethernet/ti/cpsw_ethtool.c b/drivers/net/ethernet/ti/cpsw_ethtool.c index 4d02c5135611..4619c3a950b0 100644 --- a/drivers/net/ethernet/ti/cpsw_ethtool.c +++ b/drivers/net/ethernet/ti/cpsw_ethtool.c @@ -728,7 +728,6 @@ int cpsw_get_ts_info(struct net_device *ndev, struct ethtool_ts_info *info) (1 << HWTSTAMP_TX_ON); info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) | - (1 << HWTSTAMP_FILTER_PTP_V1_L4_EVENT) | (1 << HWTSTAMP_FILTER_PTP_V2_EVENT); return 0; } diff --git a/drivers/net/ethernet/ti/cpsw_priv.c b/drivers/net/ethernet/ti/cpsw_priv.c index 51cc29f39038..31c5e36ff706 100644 --- a/drivers/net/ethernet/ti/cpsw_priv.c +++ b/drivers/net/ethernet/ti/cpsw_priv.c @@ -639,13 +639,10 @@ static int cpsw_hwtstamp_set(struct net_device *dev, struct ifreq *ifr) break; case HWTSTAMP_FILTER_ALL: case HWTSTAMP_FILTER_NTP_ALL: - return -ERANGE; case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: - priv->rx_ts_enabled = HWTSTAMP_FILTER_PTP_V1_L4_EVENT; - cfg.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT; - break; + return -ERANGE; case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c index 030a1a5afe05..dc668ed280b9 100644 --- a/drivers/net/gtp.c +++ b/drivers/net/gtp.c @@ -657,10 +657,6 @@ static int gtp_newlink(struct net *src_net, struct net_device *dev, gtp = netdev_priv(dev); - err = gtp_encap_enable(gtp, data); - if (err < 0) - return err; - if (!data[IFLA_GTP_PDP_HASHSIZE]) { hashsize = 1024; } else { @@ -671,12 +667,16 @@ static int gtp_newlink(struct net *src_net, struct net_device *dev, err = gtp_hashtable_new(gtp, hashsize); if (err < 0) - goto out_encap; + return err; + + err = gtp_encap_enable(gtp, data); + if (err < 0) + goto out_hashtable; err = register_netdevice(dev); if (err < 0) { netdev_dbg(dev, "failed to register new netdev %d\n", err); - goto out_hashtable; + goto out_encap; } gn = net_generic(dev_net(dev), gtp_net_id); @@ -687,11 +687,11 @@ static int gtp_newlink(struct net *src_net, struct net_device *dev, return 0; +out_encap: + gtp_encap_disable(gtp); out_hashtable: kfree(gtp->addr_hash); kfree(gtp->tid_hash); -out_encap: - gtp_encap_disable(gtp); return err; } diff --git a/drivers/net/ipa/gsi_trans.c b/drivers/net/ipa/gsi_trans.c index 43f5f5d93cb0..92642030e735 100644 --- a/drivers/net/ipa/gsi_trans.c +++ b/drivers/net/ipa/gsi_trans.c @@ -397,15 +397,24 @@ void gsi_trans_cmd_add(struct gsi_trans *trans, void *buf, u32 size, /* assert(which < trans->tre_count); */ - /* Set the page information for the buffer. We also need to fill in - * the DMA address and length for the buffer (something dma_map_sg() - * normally does). + /* Commands are quite different from data transfer requests. + * Their payloads come from a pool whose memory is allocated + * using dma_alloc_coherent(). We therefore do *not* map them + * for DMA (unlike what we do for pages and skbs). + * + * When a transaction completes, the SGL is normally unmapped. + * A command transaction has direction DMA_NONE, which tells + * gsi_trans_complete() to skip the unmapping step. + * + * The only things we use directly in a command scatter/gather + * entry are the DMA address and length. We still need the SG + * table flags to be maintained though, so assign a NULL page + * pointer for that purpose. */ sg = &trans->sgl[which]; - - sg_set_buf(sg, buf, size); + sg_assign_page(sg, NULL); sg_dma_address(sg) = addr; - sg_dma_len(sg) = sg->length; + sg_dma_len(sg) = size; info = &trans->info[which]; info->opcode = opcode; diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index 1d18c10e8f82..34aa196b7465 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -2389,7 +2389,8 @@ static int sfp_probe(struct platform_device *pdev) continue; sfp->gpio_irq[i] = gpiod_to_irq(sfp->gpio[i]); - if (!sfp->gpio_irq[i]) { + if (sfp->gpio_irq[i] < 0) { + sfp->gpio_irq[i] = 0; sfp->need_poll = true; continue; } diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index a322f51873d0..581ed51abb53 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1309,6 +1309,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1bc7, 0x1101, 3)}, /* Telit ME910 dual modem */ {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1201, 2)}, /* Telit LE920, LE920A4 */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x1230, 2)}, /* Telit LE910Cx */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1260, 2)}, /* Telit LE910Cx */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1261, 2)}, /* Telit LE910Cx */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1900, 1)}, /* Telit LN940 series */ diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 95ef4943d8bd..376096bfc54a 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2125,7 +2125,7 @@ static int nvme_update_ns_info(struct nvme_ns *ns, struct nvme_id_ns *id) if (blk_queue_is_zoned(ns->queue)) { ret = nvme_revalidate_zones(ns); - if (ret) + if (ret && !nvme_first_scan(ns->disk)) return ret; } diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 3c002bdcace3..f4c246462658 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -146,7 +146,8 @@ struct nvme_fc_rport { /* fc_ctrl flags values - specified as bit positions */ #define ASSOC_ACTIVE 0 -#define FCCTRL_TERMIO 1 +#define ASSOC_FAILED 1 +#define FCCTRL_TERMIO 2 struct nvme_fc_ctrl { spinlock_t lock; @@ -157,7 +158,6 @@ struct nvme_fc_ctrl { u32 cnum; bool ioq_live; - atomic_t err_work_active; u64 association_id; struct nvmefc_ls_rcv_op *rcv_disconn; @@ -167,7 +167,6 @@ struct nvme_fc_ctrl { struct blk_mq_tag_set tag_set; struct delayed_work connect_work; - struct work_struct err_work; struct kref ref; unsigned long flags; @@ -2414,24 +2413,97 @@ nvme_fc_nvme_ctrl_freed(struct nvme_ctrl *nctrl) nvme_fc_ctrl_put(ctrl); } +/* + * This routine is used by the transport when it needs to find active + * io on a queue that is to be terminated. The transport uses + * blk_mq_tagset_busy_itr() to find the busy requests, which then invoke + * this routine to kill them on a 1 by 1 basis. + * + * As FC allocates FC exchange for each io, the transport must contact + * the LLDD to terminate the exchange, thus releasing the FC exchange. + * After terminating the exchange the LLDD will call the transport's + * normal io done path for the request, but it will have an aborted + * status. The done path will return the io request back to the block + * layer with an error status. + */ +static bool +nvme_fc_terminate_exchange(struct request *req, void *data, bool reserved) +{ + struct nvme_ctrl *nctrl = data; + struct nvme_fc_ctrl *ctrl = to_fc_ctrl(nctrl); + struct nvme_fc_fcp_op *op = blk_mq_rq_to_pdu(req); + + __nvme_fc_abort_op(ctrl, op); + return true; +} + +/* + * This routine runs through all outstanding commands on the association + * and aborts them. This routine is typically be called by the + * delete_association routine. It is also called due to an error during + * reconnect. In that scenario, it is most likely a command that initializes + * the controller, including fabric Connect commands on io queues, that + * may have timed out or failed thus the io must be killed for the connect + * thread to see the error. + */ static void -nvme_fc_error_recovery(struct nvme_fc_ctrl *ctrl, char *errmsg) +__nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues) { - int active; + /* + * If io queues are present, stop them and terminate all outstanding + * ios on them. As FC allocates FC exchange for each io, the + * transport must contact the LLDD to terminate the exchange, + * thus releasing the FC exchange. We use blk_mq_tagset_busy_itr() + * to tell us what io's are busy and invoke a transport routine + * to kill them with the LLDD. After terminating the exchange + * the LLDD will call the transport's normal io done path, but it + * will have an aborted status. The done path will return the + * io requests back to the block layer as part of normal completions + * (but with error status). + */ + if (ctrl->ctrl.queue_count > 1) { + nvme_stop_queues(&ctrl->ctrl); + blk_mq_tagset_busy_iter(&ctrl->tag_set, + nvme_fc_terminate_exchange, &ctrl->ctrl); + blk_mq_tagset_wait_completed_request(&ctrl->tag_set); + if (start_queues) + nvme_start_queues(&ctrl->ctrl); + } + + /* + * Other transports, which don't have link-level contexts bound + * to sqe's, would try to gracefully shutdown the controller by + * writing the registers for shutdown and polling (call + * nvme_shutdown_ctrl()). Given a bunch of i/o was potentially + * just aborted and we will wait on those contexts, and given + * there was no indication of how live the controlelr is on the + * link, don't send more io to create more contexts for the + * shutdown. Let the controller fail via keepalive failure if + * its still present. + */ /* - * if an error (io timeout, etc) while (re)connecting, - * it's an error on creating the new association. - * Start the error recovery thread if it hasn't already - * been started. It is expected there could be multiple - * ios hitting this path before things are cleaned up. + * clean up the admin queue. Same thing as above. + */ + blk_mq_quiesce_queue(ctrl->ctrl.admin_q); + blk_mq_tagset_busy_iter(&ctrl->admin_tag_set, + nvme_fc_terminate_exchange, &ctrl->ctrl); + blk_mq_tagset_wait_completed_request(&ctrl->admin_tag_set); +} + +static void +nvme_fc_error_recovery(struct nvme_fc_ctrl *ctrl, char *errmsg) +{ + /* + * if an error (io timeout, etc) while (re)connecting, the remote + * port requested terminating of the association (disconnect_ls) + * or an error (timeout or abort) occurred on an io while creating + * the controller. Abort any ios on the association and let the + * create_association error path resolve things. */ if (ctrl->ctrl.state == NVME_CTRL_CONNECTING) { - active = atomic_xchg(&ctrl->err_work_active, 1); - if (!active && !queue_work(nvme_fc_wq, &ctrl->err_work)) { - atomic_set(&ctrl->err_work_active, 0); - WARN_ON(1); - } + __nvme_fc_abort_outstanding_ios(ctrl, true); + set_bit(ASSOC_FAILED, &ctrl->flags); return; } @@ -2745,30 +2817,6 @@ nvme_fc_complete_rq(struct request *rq) nvme_fc_ctrl_put(ctrl); } -/* - * This routine is used by the transport when it needs to find active - * io on a queue that is to be terminated. The transport uses - * blk_mq_tagset_busy_itr() to find the busy requests, which then invoke - * this routine to kill them on a 1 by 1 basis. - * - * As FC allocates FC exchange for each io, the transport must contact - * the LLDD to terminate the exchange, thus releasing the FC exchange. - * After terminating the exchange the LLDD will call the transport's - * normal io done path for the request, but it will have an aborted - * status. The done path will return the io request back to the block - * layer with an error status. - */ -static bool -nvme_fc_terminate_exchange(struct request *req, void *data, bool reserved) -{ - struct nvme_ctrl *nctrl = data; - struct nvme_fc_ctrl *ctrl = to_fc_ctrl(nctrl); - struct nvme_fc_fcp_op *op = blk_mq_rq_to_pdu(req); - - __nvme_fc_abort_op(ctrl, op); - return true; -} - static const struct blk_mq_ops nvme_fc_mq_ops = { .queue_rq = nvme_fc_queue_rq, @@ -2988,6 +3036,8 @@ nvme_fc_create_association(struct nvme_fc_ctrl *ctrl) ctrl->cnum, ctrl->lport->localport.port_name, ctrl->rport->remoteport.port_name, ctrl->ctrl.opts->subsysnqn); + clear_bit(ASSOC_FAILED, &ctrl->flags); + /* * Create the admin queue */ @@ -3016,7 +3066,7 @@ nvme_fc_create_association(struct nvme_fc_ctrl *ctrl) */ ret = nvme_enable_ctrl(&ctrl->ctrl); - if (ret) + if (ret || test_bit(ASSOC_FAILED, &ctrl->flags)) goto out_disconnect_admin_queue; ctrl->ctrl.max_segments = ctrl->lport->ops->max_sgl_segments; @@ -3026,7 +3076,7 @@ nvme_fc_create_association(struct nvme_fc_ctrl *ctrl) blk_mq_unquiesce_queue(ctrl->ctrl.admin_q); ret = nvme_init_identify(&ctrl->ctrl); - if (ret) + if (ret || test_bit(ASSOC_FAILED, &ctrl->flags)) goto out_disconnect_admin_queue; /* sanity checks */ @@ -3071,9 +3121,9 @@ nvme_fc_create_association(struct nvme_fc_ctrl *ctrl) ret = nvme_fc_create_io_queues(ctrl); else ret = nvme_fc_recreate_io_queues(ctrl); - if (ret) - goto out_term_aen_ops; } + if (ret || test_bit(ASSOC_FAILED, &ctrl->flags)) + goto out_term_aen_ops; changed = nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_LIVE); @@ -3108,60 +3158,6 @@ out_free_queue: /* - * This routine runs through all outstanding commands on the association - * and aborts them. This routine is typically be called by the - * delete_association routine. It is also called due to an error during - * reconnect. In that scenario, it is most likely a command that initializes - * the controller, including fabric Connect commands on io queues, that - * may have timed out or failed thus the io must be killed for the connect - * thread to see the error. - */ -static void -__nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues) -{ - /* - * If io queues are present, stop them and terminate all outstanding - * ios on them. As FC allocates FC exchange for each io, the - * transport must contact the LLDD to terminate the exchange, - * thus releasing the FC exchange. We use blk_mq_tagset_busy_itr() - * to tell us what io's are busy and invoke a transport routine - * to kill them with the LLDD. After terminating the exchange - * the LLDD will call the transport's normal io done path, but it - * will have an aborted status. The done path will return the - * io requests back to the block layer as part of normal completions - * (but with error status). - */ - if (ctrl->ctrl.queue_count > 1) { - nvme_stop_queues(&ctrl->ctrl); - blk_mq_tagset_busy_iter(&ctrl->tag_set, - nvme_fc_terminate_exchange, &ctrl->ctrl); - blk_mq_tagset_wait_completed_request(&ctrl->tag_set); - if (start_queues) - nvme_start_queues(&ctrl->ctrl); - } - - /* - * Other transports, which don't have link-level contexts bound - * to sqe's, would try to gracefully shutdown the controller by - * writing the registers for shutdown and polling (call - * nvme_shutdown_ctrl()). Given a bunch of i/o was potentially - * just aborted and we will wait on those contexts, and given - * there was no indication of how live the controlelr is on the - * link, don't send more io to create more contexts for the - * shutdown. Let the controller fail via keepalive failure if - * its still present. - */ - - /* - * clean up the admin queue. Same thing as above. - */ - blk_mq_quiesce_queue(ctrl->ctrl.admin_q); - blk_mq_tagset_busy_iter(&ctrl->admin_tag_set, - nvme_fc_terminate_exchange, &ctrl->ctrl); - blk_mq_tagset_wait_completed_request(&ctrl->admin_tag_set); -} - -/* * This routine stops operation of the controller on the host side. * On the host os stack side: Admin and IO queues are stopped, * outstanding ios on them terminated via FC ABTS. @@ -3237,7 +3233,6 @@ nvme_fc_delete_ctrl(struct nvme_ctrl *nctrl) { struct nvme_fc_ctrl *ctrl = to_fc_ctrl(nctrl); - cancel_work_sync(&ctrl->err_work); cancel_delayed_work_sync(&ctrl->connect_work); /* * kill the association on the link side. this will block @@ -3292,78 +3287,34 @@ nvme_fc_reconnect_or_delete(struct nvme_fc_ctrl *ctrl, int status) } static void -__nvme_fc_terminate_io(struct nvme_fc_ctrl *ctrl) +nvme_fc_reset_ctrl_work(struct work_struct *work) { - /* - * if state is CONNECTING - the error occurred as part of a - * reconnect attempt. Abort any ios on the association and - * let the create_association error paths resolve things. - */ - if (ctrl->ctrl.state == NVME_CTRL_CONNECTING) { - __nvme_fc_abort_outstanding_ios(ctrl, true); - return; - } - - /* - * For any other state, kill the association. As this routine - * is a common io abort routine for resetting and such, after - * the association is terminated, ensure that the state is set - * to CONNECTING. - */ + struct nvme_fc_ctrl *ctrl = + container_of(work, struct nvme_fc_ctrl, ctrl.reset_work); - nvme_stop_keep_alive(&ctrl->ctrl); + nvme_stop_ctrl(&ctrl->ctrl); /* will block will waiting for io to terminate */ nvme_fc_delete_association(ctrl); - if (ctrl->ctrl.state != NVME_CTRL_CONNECTING && - !nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING)) + if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING)) dev_err(ctrl->ctrl.device, "NVME-FC{%d}: error_recovery: Couldn't change state " "to CONNECTING\n", ctrl->cnum); -} - -static void -nvme_fc_reset_ctrl_work(struct work_struct *work) -{ - struct nvme_fc_ctrl *ctrl = - container_of(work, struct nvme_fc_ctrl, ctrl.reset_work); - int ret; - __nvme_fc_terminate_io(ctrl); - - nvme_stop_ctrl(&ctrl->ctrl); - - if (ctrl->rport->remoteport.port_state == FC_OBJSTATE_ONLINE) - ret = nvme_fc_create_association(ctrl); - else - ret = -ENOTCONN; - - if (ret) - nvme_fc_reconnect_or_delete(ctrl, ret); - else - dev_info(ctrl->ctrl.device, - "NVME-FC{%d}: controller reset complete\n", - ctrl->cnum); + if (ctrl->rport->remoteport.port_state == FC_OBJSTATE_ONLINE) { + if (!queue_delayed_work(nvme_wq, &ctrl->connect_work, 0)) { + dev_err(ctrl->ctrl.device, + "NVME-FC{%d}: failed to schedule connect " + "after reset\n", ctrl->cnum); + } else { + flush_delayed_work(&ctrl->connect_work); + } + } else { + nvme_fc_reconnect_or_delete(ctrl, -ENOTCONN); + } } -static void -nvme_fc_connect_err_work(struct work_struct *work) -{ - struct nvme_fc_ctrl *ctrl = - container_of(work, struct nvme_fc_ctrl, err_work); - - __nvme_fc_terminate_io(ctrl); - - atomic_set(&ctrl->err_work_active, 0); - - /* - * Rescheduling the connection after recovering - * from the io error is left to the reconnect work - * item, which is what should have stalled waiting on - * the io that had the error that scheduled this work. - */ -} static const struct nvme_ctrl_ops nvme_fc_ctrl_ops = { .name = "fc", @@ -3491,7 +3442,6 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts, ctrl->dev = lport->dev; ctrl->cnum = idx; ctrl->ioq_live = false; - atomic_set(&ctrl->err_work_active, 0); init_waitqueue_head(&ctrl->ioabort_wait); get_device(ctrl->dev); @@ -3499,7 +3449,6 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts, INIT_WORK(&ctrl->ctrl.reset_work, nvme_fc_reset_ctrl_work); INIT_DELAYED_WORK(&ctrl->connect_work, nvme_fc_connect_ctrl_work); - INIT_WORK(&ctrl->err_work, nvme_fc_connect_err_work); spin_lock_init(&ctrl->lock); /* io queue count */ @@ -3592,7 +3541,6 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts, fail_ctrl: nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_DELETING); cancel_work_sync(&ctrl->ctrl.reset_work); - cancel_work_sync(&ctrl->err_work); cancel_delayed_work_sync(&ctrl->connect_work); ctrl->ctrl.opts = NULL; diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index aad829a2b50d..541b0cba6d80 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -1768,6 +1768,14 @@ static void nvme_rdma_recv_done(struct ib_cq *cq, struct ib_wc *wc) return; } + /* sanity checking for received data length */ + if (unlikely(wc->byte_len < len)) { + dev_err(queue->ctrl->ctrl.device, + "Unexpected nvme completion length(%d)\n", wc->byte_len); + nvme_rdma_error_recovery(queue->ctrl); + return; + } + ib_dma_sync_single_for_cpu(ibdev, qe->dma, len, DMA_FROM_DEVICE); /* * AEN requests are special as they don't time out and can @@ -1890,10 +1898,10 @@ static int nvme_rdma_route_resolved(struct nvme_rdma_queue *queue) priv.hsqsize = cpu_to_le16(queue->ctrl->ctrl.sqsize); } - ret = rdma_connect(queue->cm_id, ¶m); + ret = rdma_connect_locked(queue->cm_id, ¶m); if (ret) { dev_err(ctrl->ctrl.device, - "rdma_connect failed (%d).\n", ret); + "rdma_connect_locked failed (%d).\n", ret); goto out_destroy_queue_ib; } diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c index aafcbc424b7a..957b39a82431 100644 --- a/drivers/nvme/target/core.c +++ b/drivers/nvme/target/core.c @@ -907,8 +907,6 @@ bool nvmet_req_init(struct nvmet_req *req, struct nvmet_cq *cq, req->error_loc = NVMET_NO_ERROR_LOC; req->error_slba = 0; - trace_nvmet_req_init(req, req->cmd); - /* no support for fused commands yet */ if (unlikely(flags & (NVME_CMD_FUSE_FIRST | NVME_CMD_FUSE_SECOND))) { req->error_loc = offsetof(struct nvme_common_command, flags); @@ -938,6 +936,8 @@ bool nvmet_req_init(struct nvmet_req *req, struct nvmet_cq *cq, if (status) goto fail; + trace_nvmet_req_init(req, req->cmd); + if (unlikely(!percpu_ref_tryget_live(&sq->ref))) { status = NVME_SC_INVALID_FIELD | NVME_SC_DNR; goto fail; diff --git a/drivers/nvme/target/trace.h b/drivers/nvme/target/trace.h index 0458046d6501..c14e3249a14d 100644 --- a/drivers/nvme/target/trace.h +++ b/drivers/nvme/target/trace.h @@ -46,19 +46,12 @@ static inline struct nvmet_ctrl *nvmet_req_to_ctrl(struct nvmet_req *req) return req->sq->ctrl; } -static inline void __assign_disk_name(char *name, struct nvmet_req *req, - bool init) +static inline void __assign_req_name(char *name, struct nvmet_req *req) { - struct nvmet_ctrl *ctrl = nvmet_req_to_ctrl(req); - struct nvmet_ns *ns; - - if ((init && req->sq->qid) || (!init && req->cq->qid)) { - ns = nvmet_find_namespace(ctrl, req->cmd->rw.nsid); - strncpy(name, ns->device_path, DISK_NAME_LEN); - return; - } - - memset(name, 0, DISK_NAME_LEN); + if (req->ns) + strncpy(name, req->ns->device_path, DISK_NAME_LEN); + else + memset(name, 0, DISK_NAME_LEN); } #endif @@ -81,7 +74,7 @@ TRACE_EVENT(nvmet_req_init, TP_fast_assign( __entry->cmd = cmd; __entry->ctrl = nvmet_req_to_ctrl(req); - __assign_disk_name(__entry->disk, req, true); + __assign_req_name(__entry->disk, req); __entry->qid = req->sq->qid; __entry->cid = cmd->common.command_id; __entry->opcode = cmd->common.opcode; @@ -121,7 +114,7 @@ TRACE_EVENT(nvmet_req_complete, __entry->cid = req->cqe->command_id; __entry->result = le64_to_cpu(req->cqe->result.u64); __entry->status = le16_to_cpu(req->cqe->status) >> 1; - __assign_disk_name(__entry->disk, req, false); + __assign_req_name(__entry->disk, req); ), TP_printk("nvmet%s: %sqid=%d, cmdid=%u, res=%#llx, status=%#x", __print_ctrl_name(__entry->ctrl), diff --git a/drivers/of/device.c b/drivers/of/device.c index 655dee422563..aedfaaafd3e7 100644 --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -93,7 +93,7 @@ int of_dma_configure_id(struct device *dev, struct device_node *np, { const struct iommu_ops *iommu; const struct bus_dma_region *map = NULL; - dma_addr_t dma_start = 0; + u64 dma_start = 0; u64 mask, end, size = 0; bool coherent; int ret; @@ -109,10 +109,10 @@ int of_dma_configure_id(struct device *dev, struct device_node *np, return ret == -ENODEV ? 0 : ret; } else { const struct bus_dma_region *r = map; - dma_addr_t dma_end = 0; + u64 dma_end = 0; /* Determine the overall bounds of all DMA regions */ - for (dma_start = ~(dma_addr_t)0; r->size; r++) { + for (dma_start = ~0; r->size; r++) { /* Take lower and upper limits */ if (r->dma_start < dma_start) dma_start = r->dma_start; diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c index bcd154485972..a7fbc5e37e19 100644 --- a/drivers/of/of_reserved_mem.c +++ b/drivers/of/of_reserved_mem.c @@ -200,6 +200,16 @@ static int __init __rmem_cmp(const void *a, const void *b) if (ra->base > rb->base) return 1; + /* + * Put the dynamic allocations (address == 0, size == 0) before static + * allocations at address 0x0 so that overlap detection works + * correctly. + */ + if (ra->size < rb->size) + return -1; + if (ra->size > rb->size) + return 1; + return 0; } @@ -217,8 +227,7 @@ static void __init __rmem_check_for_overlap(void) this = &reserved_mem[i]; next = &reserved_mem[i + 1]; - if (!(this->base && next->base)) - continue; + if (this->base + this->size > next->base) { phys_addr_t this_end, next_end; diff --git a/drivers/opp/core.c b/drivers/opp/core.c index 2483e765318a..0e0a5269dc82 100644 --- a/drivers/opp/core.c +++ b/drivers/opp/core.c @@ -1181,6 +1181,10 @@ static void _opp_table_kref_release(struct kref *kref) struct opp_device *opp_dev, *temp; int i; + /* Drop the lock as soon as we can */ + list_del(&opp_table->node); + mutex_unlock(&opp_table_lock); + _of_clear_opp_table(opp_table); /* Release clk */ @@ -1208,10 +1212,7 @@ static void _opp_table_kref_release(struct kref *kref) mutex_destroy(&opp_table->genpd_virt_dev_lock); mutex_destroy(&opp_table->lock); - list_del(&opp_table->node); kfree(opp_table); - - mutex_unlock(&opp_table_lock); } void dev_pm_opp_put_opp_table(struct opp_table *opp_table) @@ -1930,7 +1931,7 @@ struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev, return ERR_PTR(-EINVAL); opp_table = dev_pm_opp_get_opp_table(dev); - if (!IS_ERR(opp_table)) + if (IS_ERR(opp_table)) return opp_table; /* This should be called before OPPs are initialized */ diff --git a/drivers/opp/of.c b/drivers/opp/of.c index 874b58756220..9faeb83e4b32 100644 --- a/drivers/opp/of.c +++ b/drivers/opp/of.c @@ -944,6 +944,8 @@ static int _of_add_opp_table_v1(struct device *dev, struct opp_table *opp_table) nr -= 2; } + return 0; + remove_static_opp: _opp_remove_all_static(opp_table); diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index 674f32db85ca..44c2a6572199 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -586,8 +586,12 @@ void dw_pcie_setup_rc(struct pcie_port *pp) * ATU, so we should not program the ATU here. */ if (pp->bridge->child_ops == &dw_child_pcie_ops) { - struct resource_entry *entry = - resource_list_first_type(&pp->bridge->windows, IORESOURCE_MEM); + struct resource_entry *tmp, *entry = NULL; + + /* Get last memory resource entry */ + resource_list_for_each_entry(tmp, &pp->bridge->windows) + if (resource_type(tmp->res) == IORESOURCE_MEM) + entry = tmp; dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX0, PCIE_ATU_TYPE_MEM, entry->res->start, diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c index eee82838f4ba..ed13e81cd691 100644 --- a/drivers/pci/controller/pci-mvebu.c +++ b/drivers/pci/controller/pci-mvebu.c @@ -958,25 +958,16 @@ static void mvebu_pcie_powerdown(struct mvebu_pcie_port *port) } /* - * We can't use devm_of_pci_get_host_bridge_resources() because we - * need to parse our special DT properties encoding the MEM and IO - * apertures. + * devm_of_pci_get_host_bridge_resources() only sets up translateable resources, + * so we need extra resource setup parsing our special DT properties encoding + * the MEM and IO apertures. */ static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie) { struct device *dev = &pcie->pdev->dev; - struct device_node *np = dev->of_node; struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); int ret; - /* Get the bus range */ - ret = of_pci_parse_bus_range(np, &pcie->busn); - if (ret) { - dev_err(dev, "failed to parse bus-range property: %d\n", ret); - return ret; - } - pci_add_resource(&bridge->windows, &pcie->busn); - /* Get the PCIe memory aperture */ mvebu_mbus_get_pcie_mem_aperture(&pcie->mem); if (resource_size(&pcie->mem) == 0) { @@ -986,6 +977,9 @@ static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie) pcie->mem.name = "PCI MEM"; pci_add_resource(&bridge->windows, &pcie->mem); + ret = devm_request_resource(dev, &iomem_resource, &pcie->mem); + if (ret) + return ret; /* Get the PCIe IO aperture */ mvebu_mbus_get_pcie_io_aperture(&pcie->io); @@ -999,9 +993,12 @@ static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie) pcie->realio.name = "PCI I/O"; pci_add_resource(&bridge->windows, &pcie->realio); + ret = devm_request_resource(dev, &ioport_resource, &pcie->realio); + if (ret) + return ret; } - return devm_request_pci_bus_resources(dev, &bridge->windows); + return 0; } /* diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6d4d5a2f923d..e578d34095e9 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3516,8 +3516,13 @@ void pci_acs_init(struct pci_dev *dev) { dev->acs_cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS); - if (dev->acs_cap) - pci_enable_acs(dev); + /* + * Attempt to enable ACS regardless of capability because some Root + * Ports (e.g. those quirked with *_intel_pch_acs_*) do not have + * the standard ACS capability but still support ACS via those + * quirks. + */ + pci_enable_acs(dev); } /** diff --git a/drivers/pnp/core.c b/drivers/pnp/core.c index 3bf18d718975..a50ab002e9e4 100644 --- a/drivers/pnp/core.c +++ b/drivers/pnp/core.c @@ -51,7 +51,7 @@ static void pnp_remove_protocol(struct pnp_protocol *protocol) } /** - * pnp_protocol_register - adds a pnp protocol to the pnp layer + * pnp_register_protocol - adds a pnp protocol to the pnp layer * @protocol: pointer to the corresponding pnp_protocol structure * * Ex protocols: ISAPNP, PNPBIOS, etc @@ -91,7 +91,7 @@ int pnp_register_protocol(struct pnp_protocol *protocol) } /** - * pnp_protocol_unregister - removes a pnp protocol from the pnp layer + * pnp_unregister_protocol - removes a pnp protocol from the pnp layer * @protocol: pointer to the corresponding pnp_protocol structure */ void pnp_unregister_protocol(struct pnp_protocol *protocol) diff --git a/drivers/powercap/intel_rapl_common.c b/drivers/powercap/intel_rapl_common.c index 0b2830efc574..70d6d52bc1e2 100644 --- a/drivers/powercap/intel_rapl_common.c +++ b/drivers/powercap/intel_rapl_common.c @@ -620,7 +620,7 @@ static u64 rapl_unit_xlate(struct rapl_domain *rd, enum unit_type type, case ARBITRARY_UNIT: default: return value; - }; + } if (to_raw) return div64_u64(value, units) * scale; diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index a4ffd71696da..a5ad553da8cd 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -4165,6 +4165,8 @@ int regulator_get_voltage_rdev(struct regulator_dev *rdev) ret = rdev->desc->fixed_uV; } else if (rdev->supply) { ret = regulator_get_voltage_rdev(rdev->supply->rdev); + } else if (rdev->supply_name) { + return -EPROBE_DEFER; } else { return -EINVAL; } diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index 485cbfcbf06e..ef738b42a092 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -680,7 +680,10 @@ static int ap_device_probe(struct device *dev) { struct ap_device *ap_dev = to_ap_dev(dev); struct ap_driver *ap_drv = to_ap_drv(dev->driver); - int card, queue, devres, drvres, rc; + int card, queue, devres, drvres, rc = -ENODEV; + + if (!get_device(dev)) + return rc; if (is_queue_dev(dev)) { /* @@ -697,7 +700,7 @@ static int ap_device_probe(struct device *dev) mutex_unlock(&ap_perms_mutex); drvres = ap_drv->flags & AP_DRIVER_FLAG_DEFAULT; if (!!devres != !!drvres) - return -ENODEV; + goto out; } /* Add queue/card to list of active queues/cards */ @@ -718,6 +721,9 @@ static int ap_device_probe(struct device *dev) ap_dev->drv = NULL; } +out: + if (rc) + put_device(dev); return rc; } @@ -744,6 +750,8 @@ static int ap_device_remove(struct device *dev) hash_del(&to_ap_queue(dev)->hnode); spin_unlock_bh(&ap_queues_lock); + put_device(dev); + return 0; } @@ -1371,6 +1379,8 @@ static inline void ap_scan_domains(struct ap_card *ac) __func__, ac->id, dom); goto put_dev_and_continue; } + /* get it and thus adjust reference counter */ + get_device(dev); if (decfg) AP_DBF_INFO("%s(%d,%d) new (decfg) queue device created\n", __func__, ac->id, dom); diff --git a/drivers/s390/crypto/pkey_api.c b/drivers/s390/crypto/pkey_api.c index 99cb60ea663d..dd84995049b9 100644 --- a/drivers/s390/crypto/pkey_api.c +++ b/drivers/s390/crypto/pkey_api.c @@ -35,9 +35,6 @@ MODULE_DESCRIPTION("s390 protected key interface"); #define PROTKEYBLOBBUFSIZE 256 /* protected key buffer size used internal */ #define MAXAPQNSINLIST 64 /* max 64 apqns within a apqn list */ -/* mask of available pckmo subfunctions, fetched once at module init */ -static cpacf_mask_t pckmo_functions; - /* * debug feature data and functions */ @@ -91,6 +88,9 @@ static int pkey_clr2protkey(u32 keytype, const struct pkey_clrkey *clrkey, struct pkey_protkey *protkey) { + /* mask of available pckmo subfunctions */ + static cpacf_mask_t pckmo_functions; + long fc; int keysize; u8 paramblock[64]; @@ -114,11 +114,13 @@ static int pkey_clr2protkey(u32 keytype, return -EINVAL; } - /* - * Check if the needed pckmo subfunction is available. - * These subfunctions can be enabled/disabled by customers - * in the LPAR profile or may even change on the fly. - */ + /* Did we already check for PCKMO ? */ + if (!pckmo_functions.bytes[0]) { + /* no, so check now */ + if (!cpacf_query(CPACF_PCKMO, &pckmo_functions)) + return -ENODEV; + } + /* check for the pckmo subfunction we need now */ if (!cpacf_test_func(&pckmo_functions, fc)) { DEBUG_ERR("%s pckmo functions not available\n", __func__); return -ENODEV; @@ -2058,7 +2060,7 @@ static struct miscdevice pkey_dev = { */ static int __init pkey_init(void) { - cpacf_mask_t kmc_functions; + cpacf_mask_t func_mask; /* * The pckmo instruction should be available - even if we don't @@ -2066,15 +2068,15 @@ static int __init pkey_init(void) * is also the minimum level for the kmc instructions which * are able to work with protected keys. */ - if (!cpacf_query(CPACF_PCKMO, &pckmo_functions)) + if (!cpacf_query(CPACF_PCKMO, &func_mask)) return -ENODEV; /* check for kmc instructions available */ - if (!cpacf_query(CPACF_KMC, &kmc_functions)) + if (!cpacf_query(CPACF_KMC, &func_mask)) return -ENODEV; - if (!cpacf_test_func(&kmc_functions, CPACF_KMC_PAES_128) || - !cpacf_test_func(&kmc_functions, CPACF_KMC_PAES_192) || - !cpacf_test_func(&kmc_functions, CPACF_KMC_PAES_256)) + if (!cpacf_test_func(&func_mask, CPACF_KMC_PAES_128) || + !cpacf_test_func(&func_mask, CPACF_KMC_PAES_192) || + !cpacf_test_func(&func_mask, CPACF_KMC_PAES_256)) return -ENODEV; pkey_debug_init(); diff --git a/drivers/s390/crypto/zcrypt_card.c b/drivers/s390/crypto/zcrypt_card.c index e342eb86acd1..33b23884b133 100644 --- a/drivers/s390/crypto/zcrypt_card.c +++ b/drivers/s390/crypto/zcrypt_card.c @@ -157,11 +157,6 @@ int zcrypt_card_register(struct zcrypt_card *zc) { int rc; - rc = sysfs_create_group(&zc->card->ap_dev.device.kobj, - &zcrypt_card_attr_group); - if (rc) - return rc; - spin_lock(&zcrypt_list_lock); list_add_tail(&zc->list, &zcrypt_card_list); spin_unlock(&zcrypt_list_lock); @@ -170,6 +165,14 @@ int zcrypt_card_register(struct zcrypt_card *zc) ZCRYPT_DBF(DBF_INFO, "card=%02x register online=1\n", zc->card->id); + rc = sysfs_create_group(&zc->card->ap_dev.device.kobj, + &zcrypt_card_attr_group); + if (rc) { + spin_lock(&zcrypt_list_lock); + list_del_init(&zc->list); + spin_unlock(&zcrypt_list_lock); + } + return rc; } EXPORT_SYMBOL(zcrypt_card_register); diff --git a/drivers/s390/crypto/zcrypt_queue.c b/drivers/s390/crypto/zcrypt_queue.c index 3c207066313c..5062eae73d4a 100644 --- a/drivers/s390/crypto/zcrypt_queue.c +++ b/drivers/s390/crypto/zcrypt_queue.c @@ -180,7 +180,6 @@ int zcrypt_queue_register(struct zcrypt_queue *zq) &zcrypt_queue_attr_group); if (rc) goto out; - get_device(&zq->queue->ap_dev.device); if (zq->ops->rng) { rc = zcrypt_rng_device_add(); @@ -192,7 +191,6 @@ int zcrypt_queue_register(struct zcrypt_queue *zq) out_unregister: sysfs_remove_group(&zq->queue->ap_dev.device.kobj, &zcrypt_queue_attr_group); - put_device(&zq->queue->ap_dev.device); out: spin_lock(&zcrypt_list_lock); list_del_init(&zq->list); @@ -220,12 +218,10 @@ void zcrypt_queue_unregister(struct zcrypt_queue *zq) list_del_init(&zq->list); zcrypt_device_count--; spin_unlock(&zcrypt_list_lock); - zcrypt_card_put(zc); if (zq->ops->rng) zcrypt_rng_device_remove(); sysfs_remove_group(&zq->queue->ap_dev.device.kobj, &zcrypt_queue_attr_group); - put_device(&zq->queue->ap_dev.device); - zcrypt_queue_put(zq); + zcrypt_card_put(zc); } EXPORT_SYMBOL(zcrypt_queue_unregister); diff --git a/drivers/s390/net/ism_drv.c b/drivers/s390/net/ism_drv.c index fe96ca3c88a5..26cc943d2034 100644 --- a/drivers/s390/net/ism_drv.c +++ b/drivers/s390/net/ism_drv.c @@ -390,7 +390,7 @@ static int ism_move(struct smcd_dev *smcd, u64 dmb_tok, unsigned int idx, } static struct ism_systemeid SYSTEM_EID = { - .seid_string = "IBM-SYSZ-IBMSEID00000000", + .seid_string = "IBM-SYSZ-ISMSEID00000000", .serial_number = "0000", .type = "0000", }; diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index f32da0ca529e..308bda2e9c00 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -658,8 +658,8 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg) rcu_read_lock(); list_for_each_entry_rcu(h, &tmp_pg->dh_list, node) { - /* h->sdev should always be valid */ - BUG_ON(!h->sdev); + if (!h->sdev) + continue; h->sdev->access_state = desc[0]; } rcu_read_unlock(); @@ -705,7 +705,8 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg) pg->expiry = 0; rcu_read_lock(); list_for_each_entry_rcu(h, &pg->dh_list, node) { - BUG_ON(!h->sdev); + if (!h->sdev) + continue; h->sdev->access_state = (pg->state & SCSI_ACCESS_STATE_MASK); if (pg->pref) @@ -1147,7 +1148,6 @@ static void alua_bus_detach(struct scsi_device *sdev) spin_lock(&h->pg_lock); pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock)); rcu_assign_pointer(h->pg, NULL); - h->sdev = NULL; spin_unlock(&h->pg_lock); if (pg) { spin_lock_irq(&pg->lock); @@ -1156,6 +1156,7 @@ static void alua_bus_detach(struct scsi_device *sdev) kref_put(&pg->kref, release_port_group); } sdev->handler_data = NULL; + synchronize_rcu(); kfree(h); } diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c index 128583dfccf2..c8dd8588f800 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_main.c +++ b/drivers/scsi/hisi_sas/hisi_sas_main.c @@ -445,7 +445,7 @@ static int hisi_sas_task_prep(struct sas_task *task, } } - if (scmd) { + if (scmd && hisi_hba->shost->nr_hw_queues) { unsigned int dq_index; u32 blk_tag; diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 83ce4f11a589..8df70c92911d 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -8855,7 +8855,7 @@ reinit_after_soft_reset: /* hook into SCSI subsystem */ rc = hpsa_scsi_add_host(h); if (rc) - goto clean7; /* perf, sg, cmd, irq, shost, pci, lu, aer/h */ + goto clean8; /* lastlogicals, perf, sg, cmd, irq, shost, pci, lu, aer/h */ /* Monitor the controller for firmware lockups */ h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL; @@ -8870,6 +8870,8 @@ reinit_after_soft_reset: HPSA_EVENT_MONITOR_INTERVAL); return 0; +clean8: /* lastlogicals, perf, sg, cmd, irq, shost, pci, lu, aer/h */ + kfree(h->lastlogicals); clean7: /* perf, sg, cmd, irq, shost, pci, lu, aer/h */ hpsa_free_performant_mode(h); h->access.set_intr_mask(h, HPSA_INTR_OFF); diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index b1f3017b6547..29fcc44be2d5 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -807,13 +807,29 @@ static void purge_requests(struct ibmvscsi_host_data *hostdata, int error_code) } /** + * ibmvscsi_set_request_limit - Set the adapter request_limit in response to + * an adapter failure, reset, or SRP Login. Done under host lock to prevent + * race with SCSI command submission. + * @hostdata: adapter to adjust + * @limit: new request limit + */ +static void ibmvscsi_set_request_limit(struct ibmvscsi_host_data *hostdata, int limit) +{ + unsigned long flags; + + spin_lock_irqsave(hostdata->host->host_lock, flags); + atomic_set(&hostdata->request_limit, limit); + spin_unlock_irqrestore(hostdata->host->host_lock, flags); +} + +/** * ibmvscsi_reset_host - Reset the connection to the server * @hostdata: struct ibmvscsi_host_data to reset */ static void ibmvscsi_reset_host(struct ibmvscsi_host_data *hostdata) { scsi_block_requests(hostdata->host); - atomic_set(&hostdata->request_limit, 0); + ibmvscsi_set_request_limit(hostdata, 0); purge_requests(hostdata, DID_ERROR); hostdata->action = IBMVSCSI_HOST_ACTION_RESET; @@ -1146,13 +1162,13 @@ static void login_rsp(struct srp_event_struct *evt_struct) dev_info(hostdata->dev, "SRP_LOGIN_REJ reason %u\n", evt_struct->xfer_iu->srp.login_rej.reason); /* Login failed. */ - atomic_set(&hostdata->request_limit, -1); + ibmvscsi_set_request_limit(hostdata, -1); return; default: dev_err(hostdata->dev, "Invalid login response typecode 0x%02x!\n", evt_struct->xfer_iu->srp.login_rsp.opcode); /* Login failed. */ - atomic_set(&hostdata->request_limit, -1); + ibmvscsi_set_request_limit(hostdata, -1); return; } @@ -1163,7 +1179,7 @@ static void login_rsp(struct srp_event_struct *evt_struct) * This value is set rather than added to request_limit because * request_limit could have been set to -1 by this client. */ - atomic_set(&hostdata->request_limit, + ibmvscsi_set_request_limit(hostdata, be32_to_cpu(evt_struct->xfer_iu->srp.login_rsp.req_lim_delta)); /* If we had any pending I/Os, kick them */ @@ -1195,13 +1211,13 @@ static int send_srp_login(struct ibmvscsi_host_data *hostdata) login->req_buf_fmt = cpu_to_be16(SRP_BUF_FORMAT_DIRECT | SRP_BUF_FORMAT_INDIRECT); - spin_lock_irqsave(hostdata->host->host_lock, flags); /* Start out with a request limit of 0, since this is negotiated in * the login request we are just sending and login requests always * get sent by the driver regardless of request_limit. */ - atomic_set(&hostdata->request_limit, 0); + ibmvscsi_set_request_limit(hostdata, 0); + spin_lock_irqsave(hostdata->host->host_lock, flags); rc = ibmvscsi_send_srp_event(evt_struct, hostdata, login_timeout * 2); spin_unlock_irqrestore(hostdata->host->host_lock, flags); dev_info(hostdata->dev, "sent SRP login\n"); @@ -1781,7 +1797,7 @@ static void ibmvscsi_handle_crq(struct viosrp_crq *crq, return; case VIOSRP_CRQ_XPORT_EVENT: /* Hypervisor telling us the connection is closed */ scsi_block_requests(hostdata->host); - atomic_set(&hostdata->request_limit, 0); + ibmvscsi_set_request_limit(hostdata, 0); if (crq->format == 0x06) { /* We need to re-setup the interpartition connection */ dev_info(hostdata->dev, "Re-enabling adapter!\n"); @@ -2137,12 +2153,12 @@ static void ibmvscsi_do_work(struct ibmvscsi_host_data *hostdata) } hostdata->action = IBMVSCSI_HOST_ACTION_NONE; + spin_unlock_irqrestore(hostdata->host->host_lock, flags); if (rc) { - atomic_set(&hostdata->request_limit, -1); + ibmvscsi_set_request_limit(hostdata, -1); dev_err(hostdata->dev, "error after %s\n", action); } - spin_unlock_irqrestore(hostdata->host->host_lock, flags); scsi_unblock_requests(hostdata->host); } @@ -2226,7 +2242,7 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id) init_waitqueue_head(&hostdata->work_wait_q); hostdata->host = host; hostdata->dev = dev; - atomic_set(&hostdata->request_limit, -1); + ibmvscsi_set_request_limit(hostdata, -1); hostdata->host->max_sectors = IBMVSCSI_MAX_SECTORS_DEFAULT; if (map_persist_bufs(hostdata)) { diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 93230cd1982f..e4cc92bc4d94 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -1740,6 +1740,13 @@ _base_irqpoll(struct irq_poll *irqpoll, int budget) reply_q->irq_poll_scheduled = false; reply_q->irq_line_enable = true; enable_irq(reply_q->os_irq); + /* + * Go for one more round of processing the + * reply descriptor post queue incase if HBA + * Firmware has posted some reply descriptors + * while reenabling the IRQ. + */ + _base_process_reply_queue(reply_q); } return num_entries; diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c index 1f9005125313..b7a1dc24db38 100644 --- a/drivers/scsi/qla2xxx/qla_nvme.c +++ b/drivers/scsi/qla2xxx/qla_nvme.c @@ -554,10 +554,12 @@ static int qla_nvme_post_cmd(struct nvme_fc_local_port *lport, fcport = qla_rport->fcport; - if (!qpair || !fcport || (qpair && !qpair->fw_started) || - (fcport && fcport->deleted)) + if (!qpair || !fcport) return -ENODEV; + if (!qpair->fw_started || fcport->deleted) + return -EBUSY; + vha = fcport->vha; if (!(fcport->nvme_flag & NVME_FLAG_REGISTERED)) diff --git a/drivers/scsi/qla2xxx/qla_tmpl.c b/drivers/scsi/qla2xxx/qla_tmpl.c index 84f4416d366f..bd8623ee156a 100644 --- a/drivers/scsi/qla2xxx/qla_tmpl.c +++ b/drivers/scsi/qla2xxx/qla_tmpl.c @@ -1001,10 +1001,8 @@ qla27xx_mpi_fwdump(scsi_qla_host_t *vha, int hardware_locked) { ulong flags = 0; -#ifndef __CHECKER__ if (!hardware_locked) spin_lock_irqsave(&vha->hw->hardware_lock, flags); -#endif if (!vha->hw->mpi_fw_dump) { ql_log(ql_log_warn, vha, 0x02f3, "-> mpi_fwdump no buffer\n"); } else { @@ -1050,10 +1048,8 @@ qla27xx_mpi_fwdump(scsi_qla_host_t *vha, int hardware_locked) } bailout: -#ifndef __CHECKER__ if (!hardware_locked) spin_unlock_irqrestore(&vha->hw->hardware_lock, flags); -#endif } void diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index f2437a7570ce..9af50e6f94c4 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -1714,15 +1714,16 @@ static void scsi_sysfs_add_devices(struct Scsi_Host *shost) */ static struct async_scan_data *scsi_prep_async_scan(struct Scsi_Host *shost) { - struct async_scan_data *data; + struct async_scan_data *data = NULL; unsigned long flags; if (strncmp(scsi_scan_type, "sync", 4) == 0) return NULL; + mutex_lock(&shost->scan_mutex); if (shost->async_scan) { shost_printk(KERN_DEBUG, shost, "%s called twice\n", __func__); - return NULL; + goto err; } data = kmalloc(sizeof(*data), GFP_KERNEL); @@ -1733,7 +1734,6 @@ static struct async_scan_data *scsi_prep_async_scan(struct Scsi_Host *shost) goto err; init_completion(&data->prev_finished); - mutex_lock(&shost->scan_mutex); spin_lock_irqsave(shost->host_lock, flags); shost->async_scan = 1; spin_unlock_irqrestore(shost->host_lock, flags); @@ -1748,6 +1748,7 @@ static struct async_scan_data *scsi_prep_async_scan(struct Scsi_Host *shost) return data; err: + mutex_unlock(&shost->scan_mutex); kfree(data); return NULL; } diff --git a/drivers/soc/ti/ti_sci_pm_domains.c b/drivers/soc/ti/ti_sci_pm_domains.c index af2126d2b2ff..8afb3f45d263 100644 --- a/drivers/soc/ti/ti_sci_pm_domains.c +++ b/drivers/soc/ti/ti_sci_pm_domains.c @@ -91,7 +91,7 @@ static struct generic_pm_domain *ti_sci_pd_xlate( struct genpd_onecell_data *genpd_data = data; unsigned int idx = genpdspec->args[0]; - if (genpdspec->args_count < 2) + if (genpdspec->args_count != 1 && genpdspec->args_count != 2) return ERR_PTR(-EINVAL); if (idx >= genpd_data->num_domains) { diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index b87116e9b413..7104cf17b848 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -1193,7 +1193,6 @@ static int bcm2835_spi_setup(struct spi_device *spi) struct spi_controller *ctlr = spi->controller; struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr); struct gpio_chip *chip; - enum gpio_lookup_flags lflags; u32 cs; /* @@ -1259,21 +1258,9 @@ static int bcm2835_spi_setup(struct spi_device *spi) if (!chip) return 0; - /* - * Retrieve the corresponding GPIO line used for CS. - * The inversion semantics will be handled by the GPIO core - * code, so we pass GPIOD_OUT_LOW for "unasserted" and - * the correct flag for inversion semantics. The SPI_CS_HIGH - * on spi->mode cannot be checked for polarity in this case - * as the flag use_gpio_descriptors enforces SPI_CS_HIGH. - */ - if (of_property_read_bool(spi->dev.of_node, "spi-cs-high")) - lflags = GPIO_ACTIVE_HIGH; - else - lflags = GPIO_ACTIVE_LOW; spi->cs_gpiod = gpiochip_request_own_desc(chip, 8 - spi->chip_select, DRV_NAME, - lflags, + GPIO_LOOKUP_FLAGS_DEFAULT, GPIOD_OUT_LOW); if (IS_ERR(spi->cs_gpiod)) return PTR_ERR(spi->cs_gpiod); diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 3967afa465f0..1a08c1d584ab 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -1080,12 +1080,11 @@ MODULE_DEVICE_TABLE(of, fsl_dspi_dt_ids); #ifdef CONFIG_PM_SLEEP static int dspi_suspend(struct device *dev) { - struct spi_controller *ctlr = dev_get_drvdata(dev); - struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr); + struct fsl_dspi *dspi = dev_get_drvdata(dev); if (dspi->irq) disable_irq(dspi->irq); - spi_controller_suspend(ctlr); + spi_controller_suspend(dspi->ctlr); clk_disable_unprepare(dspi->clk); pinctrl_pm_select_sleep_state(dev); @@ -1095,8 +1094,7 @@ static int dspi_suspend(struct device *dev) static int dspi_resume(struct device *dev) { - struct spi_controller *ctlr = dev_get_drvdata(dev); - struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr); + struct fsl_dspi *dspi = dev_get_drvdata(dev); int ret; pinctrl_pm_select_default_state(dev); @@ -1104,7 +1102,7 @@ static int dspi_resume(struct device *dev) ret = clk_prepare_enable(dspi->clk); if (ret) return ret; - spi_controller_resume(ctlr); + spi_controller_resume(dspi->ctlr); if (dspi->irq) enable_irq(dspi->irq); diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 060b1f5c9b04..4b80e27ecdbf 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -1676,15 +1676,18 @@ static int spi_imx_probe(struct platform_device *pdev) goto out_master_put; } - pm_runtime_enable(spi_imx->dev); + ret = clk_prepare_enable(spi_imx->clk_per); + if (ret) + goto out_master_put; + + ret = clk_prepare_enable(spi_imx->clk_ipg); + if (ret) + goto out_put_per; + pm_runtime_set_autosuspend_delay(spi_imx->dev, MXC_RPM_TIMEOUT); pm_runtime_use_autosuspend(spi_imx->dev); - - ret = pm_runtime_get_sync(spi_imx->dev); - if (ret < 0) { - dev_err(spi_imx->dev, "failed to enable clock\n"); - goto out_runtime_pm_put; - } + pm_runtime_set_active(spi_imx->dev); + pm_runtime_enable(spi_imx->dev); spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per); /* @@ -1722,8 +1725,12 @@ out_bitbang_start: spi_imx_sdma_exit(spi_imx); out_runtime_pm_put: pm_runtime_dont_use_autosuspend(spi_imx->dev); - pm_runtime_put_sync(spi_imx->dev); + pm_runtime_set_suspended(&pdev->dev); pm_runtime_disable(spi_imx->dev); + + clk_disable_unprepare(spi_imx->clk_ipg); +out_put_per: + clk_disable_unprepare(spi_imx->clk_per); out_master_put: spi_master_put(master); diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c index 48ec2ee953dc..d740c4782775 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas.c +++ b/drivers/staging/comedi/drivers/cb_pcidas.c @@ -1342,6 +1342,7 @@ static int cb_pcidas_auto_attach(struct comedi_device *dev, if (dev->irq && board->has_ao_fifo) { dev->write_subdev = s; s->subdev_flags |= SDF_CMD_WRITE; + s->len_chanlist = s->n_chan; s->do_cmdtest = cb_pcidas_ao_cmdtest; s->do_cmd = cb_pcidas_ao_cmd; s->cancel = cb_pcidas_ao_cancel; diff --git a/drivers/staging/fieldbus/anybuss/arcx-anybus.c b/drivers/staging/fieldbus/anybuss/arcx-anybus.c index 5b8d0bae9ff3..b5fded15e8a6 100644 --- a/drivers/staging/fieldbus/anybuss/arcx-anybus.c +++ b/drivers/staging/fieldbus/anybuss/arcx-anybus.c @@ -293,7 +293,7 @@ static int controller_probe(struct platform_device *pdev) regulator = devm_regulator_register(dev, &can_power_desc, &config); if (IS_ERR(regulator)) { err = PTR_ERR(regulator); - goto out_reset; + goto out_ida; } /* make controller info visible to userspace */ cd->class_dev = kzalloc(sizeof(*cd->class_dev), GFP_KERNEL); diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c index cfb673a52b25..0bf545849b11 100644 --- a/drivers/staging/octeon/ethernet-mdio.c +++ b/drivers/staging/octeon/ethernet-mdio.c @@ -147,12 +147,6 @@ int cvm_oct_phy_setup_device(struct net_device *dev) phy_node = of_parse_phandle(priv->of_node, "phy-handle", 0); if (!phy_node && of_phy_is_fixed_link(priv->of_node)) { - int rc; - - rc = of_phy_register_fixed_link(priv->of_node); - if (rc) - return rc; - phy_node = of_node_get(priv->of_node); } if (!phy_node) diff --git a/drivers/staging/octeon/ethernet-rx.c b/drivers/staging/octeon/ethernet-rx.c index 2c16230f993c..9ebd665e5d42 100644 --- a/drivers/staging/octeon/ethernet-rx.c +++ b/drivers/staging/octeon/ethernet-rx.c @@ -69,15 +69,17 @@ static inline int cvm_oct_check_rcv_error(struct cvmx_wqe *work) else port = work->word1.cn38xx.ipprt; - if ((work->word2.snoip.err_code == 10) && (work->word1.len <= 64)) { + if ((work->word2.snoip.err_code == 10) && (work->word1.len <= 64)) /* * Ignore length errors on min size packets. Some * equipment incorrectly pads packets to 64+4FCS * instead of 60+4FCS. Note these packets still get * counted as frame errors. */ - } else if (work->word2.snoip.err_code == 5 || - work->word2.snoip.err_code == 7) { + return 0; + + if (work->word2.snoip.err_code == 5 || + work->word2.snoip.err_code == 7) { /* * We received a packet with either an alignment error * or a FCS error. This may be signalling that we are @@ -108,7 +110,10 @@ static inline int cvm_oct_check_rcv_error(struct cvmx_wqe *work) /* Port received 0xd5 preamble */ work->packet_ptr.s.addr += i + 1; work->word1.len -= i + 5; - } else if ((*ptr & 0xf) == 0xd) { + return 0; + } + + if ((*ptr & 0xf) == 0xd) { /* Port received 0xd preamble */ work->packet_ptr.s.addr += i; work->word1.len -= i + 4; @@ -118,21 +123,20 @@ static inline int cvm_oct_check_rcv_error(struct cvmx_wqe *work) ((*(ptr + 1) & 0xf) << 4); ptr++; } - } else { - printk_ratelimited("Port %d unknown preamble, packet dropped\n", - port); - cvm_oct_free_work(work); - return 1; + return 0; } + + printk_ratelimited("Port %d unknown preamble, packet dropped\n", + port); + cvm_oct_free_work(work); + return 1; } - } else { - printk_ratelimited("Port %d receive error code %d, packet dropped\n", - port, work->word2.snoip.err_code); - cvm_oct_free_work(work); - return 1; } - return 0; + printk_ratelimited("Port %d receive error code %d, packet dropped\n", + port, work->word2.snoip.err_code); + cvm_oct_free_work(work); + return 1; } static void copy_segments_to_skb(struct cvmx_wqe *work, struct sk_buff *skb) diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c index 204f0b1e2739..5dea6e96ec90 100644 --- a/drivers/staging/octeon/ethernet.c +++ b/drivers/staging/octeon/ethernet.c @@ -13,6 +13,7 @@ #include <linux/phy.h> #include <linux/slab.h> #include <linux/interrupt.h> +#include <linux/of_mdio.h> #include <linux/of_net.h> #include <linux/if_ether.h> #include <linux/if_vlan.h> @@ -892,6 +893,14 @@ static int cvm_oct_probe(struct platform_device *pdev) break; } + if (priv->of_node && of_phy_is_fixed_link(priv->of_node)) { + if (of_phy_register_fixed_link(priv->of_node)) { + netdev_err(dev, "Failed to register fixed link for interface %d, port %d\n", + interface, priv->port); + dev->netdev_ops = NULL; + } + } + if (!dev->netdev_ops) { free_netdev(dev); } else if (register_netdev(dev) < 0) { diff --git a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c index 3a4202551cfc..9097bcbd67d8 100644 --- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c +++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c @@ -179,6 +179,9 @@ struct vchiq_mmal_instance { /* ordered workqueue to process all bulk operations */ struct workqueue_struct *bulk_wq; + + /* handle for a vchiq instance */ + struct vchiq_instance *vchiq_instance; }; static struct mmal_msg_context * @@ -1840,6 +1843,7 @@ int vchiq_mmal_finalise(struct vchiq_mmal_instance *instance) mutex_unlock(&instance->vchiq_mutex); + vchiq_shutdown(instance->vchiq_instance); flush_workqueue(instance->bulk_wq); destroy_workqueue(instance->bulk_wq); @@ -1856,6 +1860,7 @@ EXPORT_SYMBOL_GPL(vchiq_mmal_finalise); int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance) { int status; + int err = -ENODEV; struct vchiq_mmal_instance *instance; static struct vchiq_instance *vchiq_instance; struct vchiq_service_params_kernel params = { @@ -1890,17 +1895,21 @@ int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance) status = vchiq_connect(vchiq_instance); if (status) { pr_err("Failed to connect VCHI instance (status=%d)\n", status); - return -EIO; + err = -EIO; + goto err_shutdown_vchiq; } instance = kzalloc(sizeof(*instance), GFP_KERNEL); - if (!instance) - return -ENOMEM; + if (!instance) { + err = -ENOMEM; + goto err_shutdown_vchiq; + } mutex_init(&instance->vchiq_mutex); instance->bulk_scratch = vmalloc(PAGE_SIZE); + instance->vchiq_instance = vchiq_instance; mutex_init(&instance->context_map_lock); idr_init_base(&instance->context_map, 1); @@ -1932,7 +1941,9 @@ err_close_services: err_free: vfree(instance->bulk_scratch); kfree(instance); - return -ENODEV; +err_shutdown_vchiq: + vchiq_shutdown(vchiq_instance); + return err; } EXPORT_SYMBOL_GPL(vchiq_mmal_init); diff --git a/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml b/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml index 43b5630c0407..510edd12ed19 100644 --- a/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml +++ b/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml @@ -24,7 +24,7 @@ description: In addition, it is recommended to declare a mmc-pwrseq on SDIO host above WFx. Without it, you may encounter issues with warm boot. The mmc-pwrseq should be compatible with mmc-pwrseq-simple. Please consult - Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt for more + Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml for more information. For SPI':' diff --git a/drivers/staging/wfx/bh.c b/drivers/staging/wfx/bh.c index 2ffa587aefaa..ed53d0b45592 100644 --- a/drivers/staging/wfx/bh.c +++ b/drivers/staging/wfx/bh.c @@ -21,7 +21,7 @@ static void device_wakeup(struct wfx_dev *wdev) if (!wdev->pdata.gpio_wakeup) return; - if (gpiod_get_value_cansleep(wdev->pdata.gpio_wakeup) >= 0) + if (gpiod_get_value_cansleep(wdev->pdata.gpio_wakeup) > 0) return; if (wfx_api_older_than(wdev, 1, 4)) { diff --git a/drivers/staging/wfx/data_tx.c b/drivers/staging/wfx/data_tx.c index 41f6a604a697..36b36ef39d05 100644 --- a/drivers/staging/wfx/data_tx.c +++ b/drivers/staging/wfx/data_tx.c @@ -31,13 +31,13 @@ static int wfx_get_hw_rate(struct wfx_dev *wdev, } return rate->idx + 14; } + // WFx only support 2GHz, else band information should be retrieved + // from ieee80211_tx_info + band = wdev->hw->wiphy->bands[NL80211_BAND_2GHZ]; if (rate->idx >= band->n_bitrates) { WARN(1, "wrong rate->idx value: %d", rate->idx); return -1; } - // WFx only support 2GHz, else band information should be retrieved - // from ieee80211_tx_info - band = wdev->hw->wiphy->bands[NL80211_BAND_2GHZ]; return band->bitrates[rate->idx].hw_value; } diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index ea84d08747df..590e6d072228 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -194,7 +194,7 @@ struct tcmu_tmr { uint8_t tmr_type; uint32_t tmr_cmd_cnt; - int16_t tmr_cmd_ids[0]; + int16_t tmr_cmd_ids[]; }; /* diff --git a/drivers/tee/tee_core.c b/drivers/tee/tee_core.c index f53bf336c0a2..6ade4a5c4840 100644 --- a/drivers/tee/tee_core.c +++ b/drivers/tee/tee_core.c @@ -200,7 +200,8 @@ int tee_session_calc_client_uuid(uuid_t *uuid, u32 connection_method, int name_len; int rc; - if (connection_method == TEE_IOCTL_LOGIN_PUBLIC) { + if (connection_method == TEE_IOCTL_LOGIN_PUBLIC || + connection_method == TEE_IOCTL_LOGIN_REE_KERNEL) { /* Nil UUID to be passed to TEE environment */ uuid_copy(uuid, &uuid_null); return 0; diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c index 718e010fcb04..09baef4ccc39 100644 --- a/drivers/tty/serial/21285.c +++ b/drivers/tty/serial/21285.c @@ -50,25 +50,25 @@ static const char serial21285_name[] = "Footbridge UART"; static bool is_enabled(struct uart_port *port, int bit) { - unsigned long private_data = (unsigned long)port->private_data; + unsigned long *private_data = (unsigned long *)&port->private_data; - if (test_bit(bit, &private_data)) + if (test_bit(bit, private_data)) return true; return false; } static void enable(struct uart_port *port, int bit) { - unsigned long private_data = (unsigned long)port->private_data; + unsigned long *private_data = (unsigned long *)&port->private_data; - set_bit(bit, &private_data); + set_bit(bit, private_data); } static void disable(struct uart_port *port, int bit) { - unsigned long private_data = (unsigned long)port->private_data; + unsigned long *private_data = (unsigned long *)&port->private_data; - clear_bit(bit, &private_data); + clear_bit(bit, private_data); } #define is_tx_enabled(port) is_enabled(port, tx_enabled_bit) diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index ff4b88c637d0..bd047e1f9bea 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -314,9 +314,10 @@ MODULE_DEVICE_TABLE(of, lpuart_dt_ids); /* Forward declare this for the dma callbacks*/ static void lpuart_dma_tx_complete(void *arg); -static inline bool is_ls1028a_lpuart(struct lpuart_port *sport) +static inline bool is_layerscape_lpuart(struct lpuart_port *sport) { - return sport->devtype == LS1028A_LPUART; + return (sport->devtype == LS1021A_LPUART || + sport->devtype == LS1028A_LPUART); } static inline bool is_imx8qxp_lpuart(struct lpuart_port *sport) @@ -1701,11 +1702,11 @@ static int lpuart32_startup(struct uart_port *port) UARTFIFO_FIFOSIZE_MASK); /* - * The LS1028A has a fixed length of 16 words. Although it supports the - * RX/TXSIZE fields their encoding is different. Eg the reference manual - * states 0b101 is 16 words. + * The LS1021A and LS1028A have a fixed FIFO depth of 16 words. + * Although they support the RX/TXSIZE fields, their encoding is + * different. Eg the reference manual states 0b101 is 16 words. */ - if (is_ls1028a_lpuart(sport)) { + if (is_layerscape_lpuart(sport)) { sport->rxfifo_size = 16; sport->txfifo_size = 16; sport->port.fifosize = sport->txfifo_size; diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index 0db53b5b3acf..78acc270e39a 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -743,8 +743,13 @@ static void k_fn(struct vc_data *vc, unsigned char value, char up_flag) return; if ((unsigned)value < ARRAY_SIZE(func_table)) { + unsigned long flags; + + spin_lock_irqsave(&func_buf_lock, flags); if (func_table[value]) puts_queue(vc, func_table[value]); + spin_unlock_irqrestore(&func_buf_lock, flags); + } else pr_err("k_fn called with value=%d\n", value); } @@ -1991,13 +1996,11 @@ out: #undef s #undef v -/* FIXME: This one needs untangling and locking */ +/* FIXME: This one needs untangling */ int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm) { struct kbsentry *kbs; - char *p; u_char *q; - u_char __user *up; int sz, fnw_sz; int delta; char *first_free, *fj, *fnw; @@ -2023,23 +2026,19 @@ int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm) i = array_index_nospec(kbs->kb_func, MAX_NR_FUNC); switch (cmd) { - case KDGKBSENT: - sz = sizeof(kbs->kb_string) - 1; /* sz should have been - a struct member */ - up = user_kdgkb->kb_string; - p = func_table[i]; - if(p) - for ( ; *p && sz; p++, sz--) - if (put_user(*p, up++)) { - ret = -EFAULT; - goto reterr; - } - if (put_user('\0', up)) { - ret = -EFAULT; - goto reterr; - } - kfree(kbs); - return ((p && *p) ? -EOVERFLOW : 0); + case KDGKBSENT: { + /* size should have been a struct member */ + ssize_t len = sizeof(user_kdgkb->kb_string); + + spin_lock_irqsave(&func_buf_lock, flags); + len = strlcpy(kbs->kb_string, func_table[i] ? : "", len); + spin_unlock_irqrestore(&func_buf_lock, flags); + + ret = copy_to_user(user_kdgkb->kb_string, kbs->kb_string, + len + 1) ? -EFAULT : 0; + + goto reterr; + } case KDSKBSENT: if (!perm) { ret = -EPERM; diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 0a33b8ababe3..5f61b25a9aaa 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -484,7 +484,7 @@ static int vt_k_ioctl(struct tty_struct *tty, unsigned int cmd, return 0; } -static inline int do_fontx_ioctl(int cmd, +static inline int do_fontx_ioctl(struct vc_data *vc, int cmd, struct consolefontdesc __user *user_cfd, struct console_font_op *op) { @@ -502,15 +502,16 @@ static inline int do_fontx_ioctl(int cmd, op->height = cfdarg.charheight; op->charcount = cfdarg.charcount; op->data = cfdarg.chardata; - return con_font_op(vc_cons[fg_console].d, op); - case GIO_FONTX: { + return con_font_op(vc, op); + + case GIO_FONTX: op->op = KD_FONT_OP_GET; op->flags = KD_FONT_FLAG_OLD; op->width = 8; op->height = cfdarg.charheight; op->charcount = cfdarg.charcount; op->data = cfdarg.chardata; - i = con_font_op(vc_cons[fg_console].d, op); + i = con_font_op(vc, op); if (i) return i; cfdarg.charheight = op->height; @@ -518,12 +519,11 @@ static inline int do_fontx_ioctl(int cmd, if (copy_to_user(user_cfd, &cfdarg, sizeof(struct consolefontdesc))) return -EFAULT; return 0; - } } return -EINVAL; } -static int vt_io_fontreset(struct console_font_op *op) +static int vt_io_fontreset(struct vc_data *vc, struct console_font_op *op) { int ret; @@ -537,19 +537,19 @@ static int vt_io_fontreset(struct console_font_op *op) op->op = KD_FONT_OP_SET_DEFAULT; op->data = NULL; - ret = con_font_op(vc_cons[fg_console].d, op); + ret = con_font_op(vc, op); if (ret) return ret; console_lock(); - con_set_default_unimap(vc_cons[fg_console].d); + con_set_default_unimap(vc); console_unlock(); return 0; } static inline int do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, - struct vc_data *vc) + bool perm, struct vc_data *vc) { struct unimapdesc tmp; @@ -557,9 +557,11 @@ static inline int do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, return -EFAULT; switch (cmd) { case PIO_UNIMAP: + if (!perm) + return -EPERM; return con_set_unimap(vc, tmp.entry_ct, tmp.entries); case GIO_UNIMAP: - if (fg_console != vc->vc_num) + if (!perm && fg_console != vc->vc_num) return -EPERM; return con_get_unimap(vc, tmp.entry_ct, &(user_ud->entry_ct), tmp.entries); @@ -582,7 +584,7 @@ static int vt_io_ioctl(struct vc_data *vc, unsigned int cmd, void __user *up, op.height = 0; op.charcount = 256; op.data = up; - return con_font_op(vc_cons[fg_console].d, &op); + return con_font_op(vc, &op); case GIO_FONT: op.op = KD_FONT_OP_GET; @@ -591,7 +593,7 @@ static int vt_io_ioctl(struct vc_data *vc, unsigned int cmd, void __user *up, op.height = 32; op.charcount = 256; op.data = up; - return con_font_op(vc_cons[fg_console].d, &op); + return con_font_op(vc, &op); case PIO_CMAP: if (!perm) @@ -607,13 +609,13 @@ static int vt_io_ioctl(struct vc_data *vc, unsigned int cmd, void __user *up, fallthrough; case GIO_FONTX: - return do_fontx_ioctl(cmd, up, &op); + return do_fontx_ioctl(vc, cmd, up, &op); case PIO_FONTRESET: if (!perm) return -EPERM; - return vt_io_fontreset(&op); + return vt_io_fontreset(vc, &op); case PIO_SCRNMAP: if (!perm) @@ -639,10 +641,7 @@ static int vt_io_ioctl(struct vc_data *vc, unsigned int cmd, void __user *up, case PIO_UNIMAP: case GIO_UNIMAP: - if (!perm) - return -EPERM; - - return do_unimap_ioctl(cmd, up, vc); + return do_unimap_ioctl(cmd, up, perm, vc); default: return -ENOIOCTLCMD; @@ -1067,8 +1066,9 @@ struct compat_consolefontdesc { }; static inline int -compat_fontx_ioctl(int cmd, struct compat_consolefontdesc __user *user_cfd, - int perm, struct console_font_op *op) +compat_fontx_ioctl(struct vc_data *vc, int cmd, + struct compat_consolefontdesc __user *user_cfd, + int perm, struct console_font_op *op) { struct compat_consolefontdesc cfdarg; int i; @@ -1086,7 +1086,8 @@ compat_fontx_ioctl(int cmd, struct compat_consolefontdesc __user *user_cfd, op->height = cfdarg.charheight; op->charcount = cfdarg.charcount; op->data = compat_ptr(cfdarg.chardata); - return con_font_op(vc_cons[fg_console].d, op); + return con_font_op(vc, op); + case GIO_FONTX: op->op = KD_FONT_OP_GET; op->flags = KD_FONT_FLAG_OLD; @@ -1094,7 +1095,7 @@ compat_fontx_ioctl(int cmd, struct compat_consolefontdesc __user *user_cfd, op->height = cfdarg.charheight; op->charcount = cfdarg.charcount; op->data = compat_ptr(cfdarg.chardata); - i = con_font_op(vc_cons[fg_console].d, op); + i = con_font_op(vc, op); if (i) return i; cfdarg.charheight = op->height; @@ -1184,7 +1185,7 @@ long vt_compat_ioctl(struct tty_struct *tty, */ case PIO_FONTX: case GIO_FONTX: - return compat_fontx_ioctl(cmd, up, perm, &op); + return compat_fontx_ioctl(vc, cmd, up, perm, &op); case KDFONTOP: return compat_kdfontop_ioctl(up, perm, &op, vc); diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c index 4761c852d9c4..d3121a32cc68 100644 --- a/drivers/usb/cdns3/ep0.c +++ b/drivers/usb/cdns3/ep0.c @@ -137,48 +137,36 @@ static int cdns3_req_ep0_set_configuration(struct cdns3_device *priv_dev, struct usb_ctrlrequest *ctrl_req) { enum usb_device_state device_state = priv_dev->gadget.state; - struct cdns3_endpoint *priv_ep; u32 config = le16_to_cpu(ctrl_req->wValue); int result = 0; - int i; switch (device_state) { case USB_STATE_ADDRESS: - /* Configure non-control EPs */ - for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) { - priv_ep = priv_dev->eps[i]; - if (!priv_ep) - continue; - - if (priv_ep->flags & EP_CLAIMED) - cdns3_ep_config(priv_ep); - } - result = cdns3_ep0_delegate_req(priv_dev, ctrl_req); - if (result) - return result; - - if (!config) { - cdns3_hw_reset_eps_config(priv_dev); - usb_gadget_set_state(&priv_dev->gadget, - USB_STATE_ADDRESS); - } + if (result || !config) + goto reset_config; break; case USB_STATE_CONFIGURED: result = cdns3_ep0_delegate_req(priv_dev, ctrl_req); + if (!config && !result) + goto reset_config; - if (!config && !result) { - cdns3_hw_reset_eps_config(priv_dev); - usb_gadget_set_state(&priv_dev->gadget, - USB_STATE_ADDRESS); - } break; default: - result = -EINVAL; + return -EINVAL; } + return 0; + +reset_config: + if (result != USB_GADGET_DELAYED_STATUS) + cdns3_hw_reset_eps_config(priv_dev); + + usb_gadget_set_state(&priv_dev->gadget, + USB_STATE_ADDRESS); + return result; } @@ -705,6 +693,7 @@ static int cdns3_gadget_ep0_queue(struct usb_ep *ep, unsigned long flags; int ret = 0; u8 zlp = 0; + int i; spin_lock_irqsave(&priv_dev->lock, flags); trace_cdns3_ep0_queue(priv_dev, request); @@ -720,6 +709,17 @@ static int cdns3_gadget_ep0_queue(struct usb_ep *ep, u32 val; cdns3_select_ep(priv_dev, 0x00); + + /* + * Configure all non-control EPs which are not enabled by class driver + */ + for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) { + priv_ep = priv_dev->eps[i]; + if (priv_ep && priv_ep->flags & EP_CLAIMED && + !(priv_ep->flags & EP_ENABLED)) + cdns3_ep_config(priv_ep, 0); + } + cdns3_set_hw_configuration(priv_dev); cdns3_ep0_complete_setup(priv_dev, 0, 1); /* wait until configuration set */ @@ -811,6 +811,7 @@ void cdns3_ep0_config(struct cdns3_device *priv_dev) struct cdns3_usb_regs __iomem *regs; struct cdns3_endpoint *priv_ep; u32 max_packet_size = 64; + u32 ep_cfg; regs = priv_dev->regs; @@ -842,8 +843,10 @@ void cdns3_ep0_config(struct cdns3_device *priv_dev) BIT(0) | BIT(16)); } - writel(EP_CFG_ENABLE | EP_CFG_MAXPKTSIZE(max_packet_size), - ®s->ep_cfg); + ep_cfg = EP_CFG_ENABLE | EP_CFG_MAXPKTSIZE(max_packet_size); + + if (!(priv_ep->flags & EP_CONFIGURED)) + writel(ep_cfg, ®s->ep_cfg); writel(EP_STS_EN_SETUPEN | EP_STS_EN_DESCMISEN | EP_STS_EN_TRBERREN, ®s->ep_sts_en); @@ -851,8 +854,10 @@ void cdns3_ep0_config(struct cdns3_device *priv_dev) /* init ep in */ cdns3_select_ep(priv_dev, USB_DIR_IN); - writel(EP_CFG_ENABLE | EP_CFG_MAXPKTSIZE(max_packet_size), - ®s->ep_cfg); + if (!(priv_ep->flags & EP_CONFIGURED)) + writel(ep_cfg, ®s->ep_cfg); + + priv_ep->flags |= EP_CONFIGURED; writel(EP_STS_EN_SETUPEN | EP_STS_EN_TRBERREN, ®s->ep_sts_en); diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c index 6e7b70a2e352..66c1e6723eb1 100644 --- a/drivers/usb/cdns3/gadget.c +++ b/drivers/usb/cdns3/gadget.c @@ -296,6 +296,8 @@ static void cdns3_ep_stall_flush(struct cdns3_endpoint *priv_ep) */ void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev) { + int i; + writel(USB_CONF_CFGRST, &priv_dev->regs->usb_conf); cdns3_allow_enable_l1(priv_dev, 0); @@ -304,6 +306,10 @@ void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev) priv_dev->out_mem_is_allocated = 0; priv_dev->wait_for_setup = 0; priv_dev->using_streams = 0; + + for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) + if (priv_dev->eps[i]) + priv_dev->eps[i]->flags &= ~EP_CONFIGURED; } /** @@ -506,7 +512,6 @@ static void cdns3_wa2_descmiss_copy_data(struct cdns3_endpoint *priv_ep, while (!list_empty(&priv_ep->wa2_descmiss_req_list)) { int chunk_end; - int length; descmiss_priv_req = cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list); @@ -517,7 +522,6 @@ static void cdns3_wa2_descmiss_copy_data(struct cdns3_endpoint *priv_ep, break; chunk_end = descmiss_priv_req->flags & REQUEST_INTERNAL_CH; - length = request->actual + descmiss_req->actual; request->status = descmiss_req->status; __cdns3_descmiss_copy_data(request, descmiss_req); list_del_init(&descmiss_priv_req->list); @@ -1746,11 +1750,8 @@ static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep) static void cdns3_disconnect_gadget(struct cdns3_device *priv_dev) { - if (priv_dev->gadget_driver && priv_dev->gadget_driver->disconnect) { - spin_unlock(&priv_dev->lock); + if (priv_dev->gadget_driver && priv_dev->gadget_driver->disconnect) priv_dev->gadget_driver->disconnect(&priv_dev->gadget); - spin_lock(&priv_dev->lock); - } } /** @@ -1761,6 +1762,7 @@ static void cdns3_disconnect_gadget(struct cdns3_device *priv_dev) */ static void cdns3_check_usb_interrupt_proceed(struct cdns3_device *priv_dev, u32 usb_ists) +__must_hold(&priv_dev->lock) { int speed = 0; @@ -1785,7 +1787,9 @@ static void cdns3_check_usb_interrupt_proceed(struct cdns3_device *priv_dev, /* Disconnection detected */ if (usb_ists & (USB_ISTS_DIS2I | USB_ISTS_DISI)) { + spin_unlock(&priv_dev->lock); cdns3_disconnect_gadget(priv_dev); + spin_lock(&priv_dev->lock); priv_dev->gadget.speed = USB_SPEED_UNKNOWN; usb_gadget_set_state(&priv_dev->gadget, USB_STATE_NOTATTACHED); cdns3_hw_reset_eps_config(priv_dev); @@ -1979,27 +1983,6 @@ static int cdns3_ep_onchip_buffer_reserve(struct cdns3_device *priv_dev, return 0; } -static void cdns3_stream_ep_reconfig(struct cdns3_device *priv_dev, - struct cdns3_endpoint *priv_ep) -{ - if (!priv_ep->use_streams || priv_dev->gadget.speed < USB_SPEED_SUPER) - return; - - if (priv_dev->dev_ver >= DEV_VER_V3) { - u32 mask = BIT(priv_ep->num + (priv_ep->dir ? 16 : 0)); - - /* - * Stream capable endpoints are handled by using ep_tdl - * register. Other endpoints use TDL from TRB feature. - */ - cdns3_clear_register_bit(&priv_dev->regs->tdl_from_trb, mask); - } - - /* Enable Stream Bit TDL chk and SID chk */ - cdns3_set_register_bit(&priv_dev->regs->ep_cfg, EP_CFG_STREAM_EN | - EP_CFG_TDL_CHK | EP_CFG_SID_CHK); -} - static void cdns3_configure_dmult(struct cdns3_device *priv_dev, struct cdns3_endpoint *priv_ep) { @@ -2037,8 +2020,9 @@ static void cdns3_configure_dmult(struct cdns3_device *priv_dev, /** * cdns3_ep_config Configure hardware endpoint * @priv_ep: extended endpoint object + * @enable: set EP_CFG_ENABLE bit in ep_cfg register. */ -void cdns3_ep_config(struct cdns3_endpoint *priv_ep) +int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) { bool is_iso_ep = (priv_ep->type == USB_ENDPOINT_XFER_ISOC); struct cdns3_device *priv_dev = priv_ep->cdns3_dev; @@ -2099,7 +2083,7 @@ void cdns3_ep_config(struct cdns3_endpoint *priv_ep) break; default: /* all other speed are not supported */ - return; + return -EINVAL; } if (max_packet_size == 1024) @@ -2109,11 +2093,33 @@ void cdns3_ep_config(struct cdns3_endpoint *priv_ep) else priv_ep->trb_burst_size = 16; - ret = cdns3_ep_onchip_buffer_reserve(priv_dev, buffering + 1, - !!priv_ep->dir); - if (ret) { - dev_err(priv_dev->dev, "onchip mem is full, ep is invalid\n"); - return; + /* onchip buffer is only allocated before configuration */ + if (!priv_dev->hw_configured_flag) { + ret = cdns3_ep_onchip_buffer_reserve(priv_dev, buffering + 1, + !!priv_ep->dir); + if (ret) { + dev_err(priv_dev->dev, "onchip mem is full, ep is invalid\n"); + return ret; + } + } + + if (enable) + ep_cfg |= EP_CFG_ENABLE; + + if (priv_ep->use_streams && priv_dev->gadget.speed >= USB_SPEED_SUPER) { + if (priv_dev->dev_ver >= DEV_VER_V3) { + u32 mask = BIT(priv_ep->num + (priv_ep->dir ? 16 : 0)); + + /* + * Stream capable endpoints are handled by using ep_tdl + * register. Other endpoints use TDL from TRB feature. + */ + cdns3_clear_register_bit(&priv_dev->regs->tdl_from_trb, + mask); + } + + /* Enable Stream Bit TDL chk and SID chk */ + ep_cfg |= EP_CFG_STREAM_EN | EP_CFG_TDL_CHK | EP_CFG_SID_CHK; } ep_cfg |= EP_CFG_MAXPKTSIZE(max_packet_size) | @@ -2123,9 +2129,12 @@ void cdns3_ep_config(struct cdns3_endpoint *priv_ep) cdns3_select_ep(priv_dev, bEndpointAddress); writel(ep_cfg, &priv_dev->regs->ep_cfg); + priv_ep->flags |= EP_CONFIGURED; dev_dbg(priv_dev->dev, "Configure %s: with val %08x\n", priv_ep->name, ep_cfg); + + return 0; } /* Find correct direction for HW endpoint according to description */ @@ -2266,7 +2275,7 @@ static int cdns3_gadget_ep_enable(struct usb_ep *ep, u32 bEndpointAddress; unsigned long flags; int enable = 1; - int ret; + int ret = 0; int val; priv_ep = ep_to_cdns3_ep(ep); @@ -2305,6 +2314,17 @@ static int cdns3_gadget_ep_enable(struct usb_ep *ep, bEndpointAddress = priv_ep->num | priv_ep->dir; cdns3_select_ep(priv_dev, bEndpointAddress); + /* + * For some versions of controller at some point during ISO OUT traffic + * DMA reads Transfer Ring for the EP which has never got doorbell. + * This issue was detected only on simulation, but to avoid this issue + * driver add protection against it. To fix it driver enable ISO OUT + * endpoint before setting DRBL. This special treatment of ISO OUT + * endpoints are recommended by controller specification. + */ + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir) + enable = 0; + if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) { /* * Enable stream support (SS mode) related interrupts @@ -2315,13 +2335,17 @@ static int cdns3_gadget_ep_enable(struct usb_ep *ep, EP_STS_EN_SIDERREN | EP_STS_EN_MD_EXITEN | EP_STS_EN_STREAMREN; priv_ep->use_streams = true; - cdns3_stream_ep_reconfig(priv_dev, priv_ep); + ret = cdns3_ep_config(priv_ep, enable); priv_dev->using_streams |= true; } + } else { + ret = cdns3_ep_config(priv_ep, enable); } - ret = cdns3_allocate_trb_pool(priv_ep); + if (ret) + goto exit; + ret = cdns3_allocate_trb_pool(priv_ep); if (ret) goto exit; @@ -2351,20 +2375,6 @@ static int cdns3_gadget_ep_enable(struct usb_ep *ep, writel(reg, &priv_dev->regs->ep_sts_en); - /* - * For some versions of controller at some point during ISO OUT traffic - * DMA reads Transfer Ring for the EP which has never got doorbell. - * This issue was detected only on simulation, but to avoid this issue - * driver add protection against it. To fix it driver enable ISO OUT - * endpoint before setting DRBL. This special treatment of ISO OUT - * endpoints are recommended by controller specification. - */ - if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir) - enable = 0; - - if (enable) - cdns3_set_register_bit(&priv_dev->regs->ep_cfg, EP_CFG_ENABLE); - ep->desc = desc; priv_ep->flags &= ~(EP_PENDING_REQUEST | EP_STALLED | EP_STALL_PENDING | EP_QUIRK_ISO_OUT_EN | EP_QUIRK_EXTRA_BUF_EN); @@ -3265,10 +3275,13 @@ err0: } static int cdns3_gadget_suspend(struct cdns3 *cdns, bool do_wakeup) +__must_hold(&cdns->lock) { struct cdns3_device *priv_dev = cdns->gadget_dev; + spin_unlock(&cdns->lock); cdns3_disconnect_gadget(priv_dev); + spin_lock(&cdns->lock); priv_dev->gadget.speed = USB_SPEED_UNKNOWN; usb_gadget_set_state(&priv_dev->gadget, USB_STATE_NOTATTACHED); diff --git a/drivers/usb/cdns3/gadget.h b/drivers/usb/cdns3/gadget.h index 1ccecd237530..21fa461c518e 100644 --- a/drivers/usb/cdns3/gadget.h +++ b/drivers/usb/cdns3/gadget.h @@ -1072,7 +1072,7 @@ struct cdns3_trb { #define TRB_TDL_SS_SIZE_GET(p) (((p) & GENMASK(23, 17)) >> 17) /* transfer_len bitmasks - bits 31:24 */ -#define TRB_BURST_LEN(p) (((p) << 24) & GENMASK(31, 24)) +#define TRB_BURST_LEN(p) ((unsigned int)((p) << 24) & GENMASK(31, 24)) #define TRB_BURST_LEN_GET(p) (((p) & GENMASK(31, 24)) >> 24) /* Data buffer pointer bitmasks*/ @@ -1159,6 +1159,7 @@ struct cdns3_endpoint { #define EP_QUIRK_EXTRA_BUF_DET BIT(12) #define EP_QUIRK_EXTRA_BUF_EN BIT(13) #define EP_TDLCHK_EN BIT(15) +#define EP_CONFIGURED BIT(16) u32 flags; struct cdns3_request *descmis_req; @@ -1360,7 +1361,7 @@ void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep, int cdns3_init_ep0(struct cdns3_device *priv_dev, struct cdns3_endpoint *priv_ep); void cdns3_ep0_config(struct cdns3_device *priv_dev); -void cdns3_ep_config(struct cdns3_endpoint *priv_ep); +int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable); void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir); int __cdns3_gadget_wakeup(struct cdns3_device *priv_dev); diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 30ef946a8e1a..1e7568867910 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -508,6 +508,7 @@ static void acm_read_bulk_callback(struct urb *urb) "%s - cooling babbling device\n", __func__); usb_mark_last_busy(acm->dev); set_bit(rb->index, &acm->urbs_in_error_delay); + set_bit(ACM_ERROR_DELAY, &acm->flags); cooldown = true; break; default: @@ -533,7 +534,7 @@ static void acm_read_bulk_callback(struct urb *urb) if (stopped || stalled || cooldown) { if (stalled) - schedule_work(&acm->work); + schedule_delayed_work(&acm->dwork, 0); else if (cooldown) schedule_delayed_work(&acm->dwork, HZ / 2); return; @@ -563,13 +564,13 @@ static void acm_write_bulk(struct urb *urb) acm_write_done(acm, wb); spin_unlock_irqrestore(&acm->write_lock, flags); set_bit(EVENT_TTY_WAKEUP, &acm->flags); - schedule_work(&acm->work); + schedule_delayed_work(&acm->dwork, 0); } static void acm_softint(struct work_struct *work) { int i; - struct acm *acm = container_of(work, struct acm, work); + struct acm *acm = container_of(work, struct acm, dwork.work); if (test_bit(EVENT_RX_STALL, &acm->flags)) { smp_mb(); /* against acm_suspend() */ @@ -585,7 +586,7 @@ static void acm_softint(struct work_struct *work) if (test_and_clear_bit(ACM_ERROR_DELAY, &acm->flags)) { for (i = 0; i < acm->rx_buflimit; i++) if (test_and_clear_bit(i, &acm->urbs_in_error_delay)) - acm_submit_read_urb(acm, i, GFP_NOIO); + acm_submit_read_urb(acm, i, GFP_KERNEL); } if (test_and_clear_bit(EVENT_TTY_WAKEUP, &acm->flags)) @@ -1351,7 +1352,6 @@ made_compressed_probe: acm->ctrlsize = ctrlsize; acm->readsize = readsize; acm->rx_buflimit = num_rx_buf; - INIT_WORK(&acm->work, acm_softint); INIT_DELAYED_WORK(&acm->dwork, acm_softint); init_waitqueue_head(&acm->wioctl); spin_lock_init(&acm->write_lock); @@ -1561,7 +1561,6 @@ static void acm_disconnect(struct usb_interface *intf) } acm_kill_urbs(acm); - cancel_work_sync(&acm->work); cancel_delayed_work_sync(&acm->dwork); tty_unregister_device(acm_tty_driver, acm->minor); @@ -1604,7 +1603,6 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message) return 0; acm_kill_urbs(acm); - cancel_work_sync(&acm->work); cancel_delayed_work_sync(&acm->dwork); acm->urbs_in_error_delay = 0; diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index 9dce179d031b..8aef5eb769a0 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -112,8 +112,7 @@ struct acm { # define ACM_ERROR_DELAY 3 unsigned long urbs_in_error_delay; /* these need to be restarted after a delay */ struct usb_cdc_line_coding line; /* bits, stop, parity */ - struct work_struct work; /* work queue entry for various purposes*/ - struct delayed_work dwork; /* for cool downs needed in error recovery */ + struct delayed_work dwork; /* work queue entry for various purposes */ unsigned int ctrlin; /* input control lines (DCD, DSR, RI, break, overruns) */ unsigned int ctrlout; /* output control lines (DTR, RTS) */ struct async_icount iocount; /* counters for control line changes */ diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 98b7449c11f3..4dfa44d6cc3c 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -839,6 +839,22 @@ const struct usb_device_id *usb_device_match_id(struct usb_device *udev, return NULL; } +bool usb_driver_applicable(struct usb_device *udev, + struct usb_device_driver *udrv) +{ + if (udrv->id_table && udrv->match) + return usb_device_match_id(udev, udrv->id_table) != NULL && + udrv->match(udev); + + if (udrv->id_table) + return usb_device_match_id(udev, udrv->id_table) != NULL; + + if (udrv->match) + return udrv->match(udev); + + return false; +} + static int usb_device_match(struct device *dev, struct device_driver *drv) { /* devices and interfaces are handled separately */ @@ -853,17 +869,14 @@ static int usb_device_match(struct device *dev, struct device_driver *drv) udev = to_usb_device(dev); udrv = to_usb_device_driver(drv); - if (udrv->id_table) - return usb_device_match_id(udev, udrv->id_table) != NULL; - - if (udrv->match) - return udrv->match(udev); - /* If the device driver under consideration does not have a * id_table or a match function, then let the driver's probe * function decide. */ - return 1; + if (!udrv->id_table && !udrv->match) + return 1; + + return usb_driver_applicable(udev, udrv); } else if (is_usb_interface(dev)) { struct usb_interface *intf; @@ -941,8 +954,7 @@ static int __usb_bus_reprobe_drivers(struct device *dev, void *data) return 0; udev = to_usb_device(dev); - if (usb_device_match_id(udev, new_udriver->id_table) == NULL && - (!new_udriver->match || new_udriver->match(udev) == 0)) + if (!usb_driver_applicable(udev, new_udriver)) return 0; ret = device_reprobe(dev); diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index 22c887f5c497..26f9fb9f67ca 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -205,9 +205,7 @@ static int __check_for_non_generic_match(struct device_driver *drv, void *data) udrv = to_usb_device_driver(drv); if (udrv == &usb_generic_driver) return 0; - if (usb_device_match_id(udev, udrv->id_table) != NULL) - return 1; - return (udrv->match && udrv->match(udev)); + return usb_driver_applicable(udev, udrv); } static bool usb_generic_driver_match(struct usb_device *udev) diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index c893f54a3420..82538daac8b8 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -74,6 +74,8 @@ extern int usb_match_device(struct usb_device *dev, const struct usb_device_id *id); extern const struct usb_device_id *usb_device_match_id(struct usb_device *udev, const struct usb_device_id *id); +extern bool usb_driver_applicable(struct usb_device *udev, + struct usb_device_driver *udrv); extern void usb_forced_unbind_intf(struct usb_interface *intf); extern void usb_unbind_and_rebind_marked_interfaces(struct usb_device *udev); diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index bdf0925da6b6..841daec70b6e 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * core.c - DesignWare USB3 DRD Controller Core file * * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 74323b10a64a..2f95f08ca511 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1277,7 +1277,7 @@ struct dwc3_event_type { #define DWC3_DEPEVT_EPCMDCMPLT 0x07 /** - * struct dwc3_event_depvt - Device Endpoint Events + * struct dwc3_event_depevt - Device Endpoint Events * @one_bit: indicates this is an endpoint event (not used) * @endpoint_number: number of the endpoint * @endpoint_event: The event we have: diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 05b176c82cc5..c6d455f2bb92 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1245,7 +1245,7 @@ int usb_string_id(struct usb_composite_dev *cdev) EXPORT_SYMBOL_GPL(usb_string_id); /** - * usb_string_ids() - allocate unused string IDs in batch + * usb_string_ids_tab() - allocate unused string IDs in batch * @cdev: the device whose string descriptor IDs are being allocated * @str: an array of usb_string objects to assign numbers to * Context: single threaded during gadget setup diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index e077b2ca53c5..869d9c4de5fc 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -479,8 +479,8 @@ static int tegra_ehci_probe(struct platform_device *pdev) u_phy->otg->host = hcd_to_bus(hcd); irq = platform_get_irq(pdev, 0); - if (!irq) { - err = -ENODEV; + if (irq < 0) { + err = irq; goto cleanup_phy; } diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index ae8f60f6e6a5..44a7e58a26e3 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -94,10 +94,13 @@ static struct platform_device *fsl_usb2_device_register( pdev->dev.coherent_dma_mask = ofdev->dev.coherent_dma_mask; - if (!pdev->dev.dma_mask) + if (!pdev->dev.dma_mask) { pdev->dev.dma_mask = &ofdev->dev.coherent_dma_mask; - else - dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + } else { + retval = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (retval) + goto error; + } retval = platform_device_add_data(pdev, pdata, sizeof(*pdata)); if (retval) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index fe405cd38dbc..138ba4528dd3 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -2252,8 +2252,8 @@ static void xhci_create_rhub_port_array(struct xhci_hcd *xhci, if (!rhub->num_ports) return; - rhub->ports = kcalloc_node(rhub->num_ports, sizeof(rhub->ports), flags, - dev_to_node(dev)); + rhub->ports = kcalloc_node(rhub->num_ports, sizeof(*rhub->ports), + flags, dev_to_node(dev)); for (i = 0; i < HCS_MAX_PORTS(xhci->hcs_params1); i++) { if (xhci->hw_ports[i].rhub != rhub || xhci->hw_ports[i].hcd_portnum == DUPLICATE_ENTRY) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index c26c06e5c88c..bf89172c43ca 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -23,6 +23,8 @@ #define SSIC_PORT_CFG2_OFFSET 0x30 #define PROG_DONE (1 << 30) #define SSIC_PORT_UNUSED (1 << 31) +#define SPARSE_DISABLE_BIT 17 +#define SPARSE_CNTL_ENABLE 0xC12C /* Device for a quirk */ #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 @@ -161,6 +163,9 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) (pdev->device == 0x15e0 || pdev->device == 0x15e1)) xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND; + if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5) + xhci->quirks |= XHCI_DISABLE_SPARSE; + if (pdev->vendor == PCI_VENDOR_ID_AMD) xhci->quirks |= XHCI_TRUST_TX_LENGTH; @@ -498,6 +503,15 @@ static void xhci_pme_quirk(struct usb_hcd *hcd) readl(reg); } +static void xhci_sparse_control_quirk(struct usb_hcd *hcd) +{ + u32 reg; + + reg = readl(hcd->regs + SPARSE_CNTL_ENABLE); + reg &= ~BIT(SPARSE_DISABLE_BIT); + writel(reg, hcd->regs + SPARSE_CNTL_ENABLE); +} + static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); @@ -517,6 +531,9 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) xhci_ssic_port_unused_quirk(hcd, true); + if (xhci->quirks & XHCI_DISABLE_SPARSE) + xhci_sparse_control_quirk(hcd); + ret = xhci_suspend(xhci, do_wakeup); if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED)) xhci_ssic_port_unused_quirk(hcd, false); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 482fe8c5e3b4..d4a8d0efbbc4 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3533,11 +3533,14 @@ static int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, xhci_dbg(xhci, "Slot %u ep ctx %u now has streams.\n", udev->slot_id, ep_index); vdev->eps[ep_index].ep_state |= EP_HAS_STREAMS; - xhci_debugfs_create_stream_files(xhci, vdev, ep_index); } xhci_free_command(xhci, config_cmd); spin_unlock_irqrestore(&xhci->lock, flags); + for (i = 0; i < num_eps; i++) { + ep_index = xhci_get_endpoint_index(&eps[i]->desc); + xhci_debugfs_create_stream_files(xhci, vdev, ep_index); + } /* Subtract 1 for stream 0, which drivers can't use */ return num_streams - 1; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 8be88379c0fb..ebb359ebb261 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1877,6 +1877,7 @@ struct xhci_hcd { #define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35) #define XHCI_RENESAS_FW_QUIRK BIT_ULL(36) #define XHCI_SKIP_PHY_INIT BIT_ULL(37) +#define XHCI_DISABLE_SPARSE BIT_ULL(38) unsigned int num_active_eps; unsigned int limit_active_eps; diff --git a/drivers/usb/misc/apple-mfi-fastcharge.c b/drivers/usb/misc/apple-mfi-fastcharge.c index b403094a6b3a..579d8c84de42 100644 --- a/drivers/usb/misc/apple-mfi-fastcharge.c +++ b/drivers/usb/misc/apple-mfi-fastcharge.c @@ -163,17 +163,23 @@ static const struct power_supply_desc apple_mfi_fc_desc = { .property_is_writeable = apple_mfi_fc_property_is_writeable }; +static bool mfi_fc_match(struct usb_device *udev) +{ + int idProduct; + + idProduct = le16_to_cpu(udev->descriptor.idProduct); + /* See comment above mfi_fc_id_table[] */ + return (idProduct >= 0x1200 && idProduct <= 0x12ff); +} + static int mfi_fc_probe(struct usb_device *udev) { struct power_supply_config battery_cfg = {}; struct mfi_device *mfi = NULL; - int err, idProduct; + int err; - idProduct = le16_to_cpu(udev->descriptor.idProduct); - /* See comment above mfi_fc_id_table[] */ - if (idProduct < 0x1200 || idProduct > 0x12ff) { + if (!mfi_fc_match(udev)) return -ENODEV; - } mfi = kzalloc(sizeof(struct mfi_device), GFP_KERNEL); if (!mfi) { @@ -220,6 +226,7 @@ static struct usb_device_driver mfi_fc_driver = { .probe = mfi_fc_probe, .disconnect = mfi_fc_disconnect, .id_table = mfi_fc_id_table, + .match = mfi_fc_match, .generic_subclass = 1, }; diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c index b069a5122aaa..cf720e944aaa 100644 --- a/drivers/usb/typec/mux.c +++ b/drivers/usb/typec/mux.c @@ -71,7 +71,7 @@ struct typec_switch *fwnode_typec_switch_get(struct fwnode_handle *fwnode) EXPORT_SYMBOL_GPL(fwnode_typec_switch_get); /** - * typec_put_switch - Release USB Type-C orientation switch + * typec_switch_put - Release USB Type-C orientation switch * @sw: USB Type-C orientation switch * * Decrement reference count for @sw. diff --git a/drivers/usb/typec/stusb160x.c b/drivers/usb/typec/stusb160x.c index ce0bd7b3ad88..2a618f02f4f1 100644 --- a/drivers/usb/typec/stusb160x.c +++ b/drivers/usb/typec/stusb160x.c @@ -544,11 +544,10 @@ static int stusb160x_get_fw_caps(struct stusb160x *chip, */ ret = fwnode_property_read_string(fwnode, "power-role", &cap_str); if (!ret) { - chip->port_type = typec_find_port_power_role(cap_str); - if (chip->port_type < 0) { - ret = chip->port_type; + ret = typec_find_port_power_role(cap_str); + if (ret < 0) return ret; - } + chip->port_type = ret; } chip->capability.type = chip->port_type; @@ -565,15 +564,13 @@ static int stusb160x_get_fw_caps(struct stusb160x *chip, */ ret = fwnode_property_read_string(fwnode, "power-opmode", &cap_str); if (!ret) { - chip->pwr_opmode = typec_find_pwr_opmode(cap_str); + ret = typec_find_pwr_opmode(cap_str); /* Power delivery not yet supported */ - if (chip->pwr_opmode < 0 || - chip->pwr_opmode == TYPEC_PWR_MODE_PD) { - ret = chip->pwr_opmode < 0 ? chip->pwr_opmode : -EINVAL; - dev_err(chip->dev, "bad power operation mode: %d\n", - chip->pwr_opmode); - return ret; + if (ret < 0 || ret == TYPEC_PWR_MODE_PD) { + dev_err(chip->dev, "bad power operation mode: %d\n", ret); + return -EINVAL; } + chip->pwr_opmode = ret; } return 0; @@ -632,6 +629,7 @@ static const struct of_device_id stusb160x_of_match[] = { { .compatible = "st,stusb1600", .data = &stusb1600_regmap_config}, {}, }; +MODULE_DEVICE_TABLE(of, stusb160x_of_match); static int stusb160x_probe(struct i2c_client *client) { @@ -729,8 +727,8 @@ static int stusb160x_probe(struct i2c_client *client) } chip->port = typec_register_port(chip->dev, &chip->capability); - if (!chip->port) { - ret = -ENODEV; + if (IS_ERR(chip->port)) { + ret = PTR_ERR(chip->port); goto all_reg_disable; } diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 55535c4f66bf..a6fae1f86505 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -2890,6 +2890,9 @@ static void tcpm_reset_port(struct tcpm_port *port) static void tcpm_detach(struct tcpm_port *port) { + if (tcpm_port_is_disconnected(port)) + port->hard_reset_count = 0; + if (!port->attached) return; @@ -2898,9 +2901,6 @@ static void tcpm_detach(struct tcpm_port *port) port->tcpc->set_bist_data(port->tcpc, false); } - if (tcpm_port_is_disconnected(port)) - port->hard_reset_count = 0; - tcpm_reset_port(port); } diff --git a/drivers/vdpa/mlx5/core/mr.c b/drivers/vdpa/mlx5/core/mr.c index ef1c550f8266..4b6195666c58 100644 --- a/drivers/vdpa/mlx5/core/mr.c +++ b/drivers/vdpa/mlx5/core/mr.c @@ -239,7 +239,6 @@ static int map_direct_mr(struct mlx5_vdpa_dev *mvdev, struct mlx5_vdpa_direct_mr u64 paend; struct scatterlist *sg; struct device *dma = mvdev->mdev->device; - int ret; for (map = vhost_iotlb_itree_first(iotlb, mr->start, mr->end - 1); map; map = vhost_iotlb_itree_next(map, start, mr->end - 1)) { @@ -277,8 +276,8 @@ static int map_direct_mr(struct mlx5_vdpa_dev *mvdev, struct mlx5_vdpa_direct_mr done: mr->log_size = log_entity_size; mr->nsg = nsg; - ret = dma_map_sg_attrs(dma, mr->sg_head.sgl, mr->nsg, DMA_BIDIRECTIONAL, 0); - if (!ret) + err = dma_map_sg_attrs(dma, mr->sg_head.sgl, mr->nsg, DMA_BIDIRECTIONAL, 0); + if (!err) goto err_map; err = create_direct_mr(mvdev, mr); diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c index 2629911c29bb..6a90fdb9cbfc 100644 --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c @@ -38,6 +38,10 @@ static int batch_mapping = 1; module_param(batch_mapping, int, 0444); MODULE_PARM_DESC(batch_mapping, "Batched mapping 1 -Enable; 0 - Disable"); +static char *macaddr; +module_param(macaddr, charp, 0); +MODULE_PARM_DESC(macaddr, "Ethernet MAC address"); + struct vdpasim_virtqueue { struct vringh vring; struct vringh_kiov iov; @@ -60,7 +64,8 @@ struct vdpasim_virtqueue { static u64 vdpasim_features = (1ULL << VIRTIO_F_ANY_LAYOUT) | (1ULL << VIRTIO_F_VERSION_1) | - (1ULL << VIRTIO_F_ACCESS_PLATFORM); + (1ULL << VIRTIO_F_ACCESS_PLATFORM) | + (1ULL << VIRTIO_NET_F_MAC); /* State of each vdpasim device */ struct vdpasim { @@ -361,7 +366,9 @@ static struct vdpasim *vdpasim_create(void) spin_lock_init(&vdpasim->iommu_lock); dev = &vdpasim->vdpa.dev; - dev->coherent_dma_mask = DMA_BIT_MASK(64); + dev->dma_mask = &dev->coherent_dma_mask; + if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64))) + goto err_iommu; set_dma_ops(dev, &vdpasim_dma_ops); vdpasim->iommu = vhost_iotlb_alloc(2048, 0); @@ -372,7 +379,15 @@ static struct vdpasim *vdpasim_create(void) if (!vdpasim->buffer) goto err_iommu; - eth_random_addr(vdpasim->config.mac); + if (macaddr) { + mac_pton(macaddr, vdpasim->config.mac); + if (!is_valid_ether_addr(vdpasim->config.mac)) { + ret = -EADDRNOTAVAIL; + goto err_iommu; + } + } else { + eth_random_addr(vdpasim->config.mac); + } vringh_set_iotlb(&vdpasim->vqs[0].vring, vdpasim->iommu); vringh_set_iotlb(&vdpasim->vqs[1].vring, vdpasim->iommu); @@ -574,6 +589,16 @@ static u32 vdpasim_get_generation(struct vdpa_device *vdpa) return vdpasim->generation; } +static struct vdpa_iova_range vdpasim_get_iova_range(struct vdpa_device *vdpa) +{ + struct vdpa_iova_range range = { + .first = 0ULL, + .last = ULLONG_MAX, + }; + + return range; +} + static int vdpasim_set_map(struct vdpa_device *vdpa, struct vhost_iotlb *iotlb) { @@ -657,6 +682,7 @@ static const struct vdpa_config_ops vdpasim_net_config_ops = { .get_config = vdpasim_get_config, .set_config = vdpasim_set_config, .get_generation = vdpasim_get_generation, + .get_iova_range = vdpasim_get_iova_range, .dma_map = vdpasim_dma_map, .dma_unmap = vdpasim_dma_unmap, .free = vdpasim_free, @@ -683,6 +709,7 @@ static const struct vdpa_config_ops vdpasim_net_batch_config_ops = { .get_config = vdpasim_get_config, .set_config = vdpasim_set_config, .get_generation = vdpasim_get_generation, + .get_iova_range = vdpasim_get_iova_range, .set_map = vdpasim_set_map, .free = vdpasim_free, }; diff --git a/drivers/vfio/fsl-mc/vfio_fsl_mc.c b/drivers/vfio/fsl-mc/vfio_fsl_mc.c index 0113a980f974..f27e25112c40 100644 --- a/drivers/vfio/fsl-mc/vfio_fsl_mc.c +++ b/drivers/vfio/fsl-mc/vfio_fsl_mc.c @@ -248,7 +248,9 @@ static long vfio_fsl_mc_ioctl(void *device_data, unsigned int cmd, info.size = vdev->regions[info.index].size; info.flags = vdev->regions[info.index].flags; - return copy_to_user((void __user *)arg, &info, minsz); + if (copy_to_user((void __user *)arg, &info, minsz)) + return -EFAULT; + return 0; } case VFIO_DEVICE_GET_IRQ_INFO: { @@ -267,7 +269,9 @@ static long vfio_fsl_mc_ioctl(void *device_data, unsigned int cmd, info.flags = VFIO_IRQ_INFO_EVENTFD; info.count = 1; - return copy_to_user((void __user *)arg, &info, minsz); + if (copy_to_user((void __user *)arg, &info, minsz)) + return -EFAULT; + return 0; } case VFIO_DEVICE_SET_IRQS: { @@ -468,7 +472,7 @@ static int vfio_fsl_mc_mmap(void *device_data, struct vm_area_struct *vma) { struct vfio_fsl_mc_device *vdev = device_data; struct fsl_mc_device *mc_dev = vdev->mc_dev; - int index; + unsigned int index; index = vma->vm_pgoff >> (VFIO_FSL_MC_OFFSET_SHIFT - PAGE_SHIFT); diff --git a/drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c b/drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c index c80dceb46f79..0d9f3002df7f 100644 --- a/drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c +++ b/drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c @@ -13,7 +13,7 @@ #include "linux/fsl/mc.h" #include "vfio_fsl_mc_private.h" -int vfio_fsl_mc_irqs_allocate(struct vfio_fsl_mc_device *vdev) +static int vfio_fsl_mc_irqs_allocate(struct vfio_fsl_mc_device *vdev) { struct fsl_mc_device *mc_dev = vdev->mc_dev; struct vfio_fsl_mc_irq *mc_irq; diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c index fbd2b3404184..e6190173482c 100644 --- a/drivers/vfio/pci/vfio_pci.c +++ b/drivers/vfio/pci/vfio_pci.c @@ -385,7 +385,7 @@ static int vfio_pci_enable(struct vfio_pci_device *vdev) pdev->vendor == PCI_VENDOR_ID_INTEL && IS_ENABLED(CONFIG_VFIO_PCI_IGD)) { ret = vfio_pci_igd_init(vdev); - if (ret) { + if (ret && ret != -ENODEV) { pci_warn(pdev, "Failed to setup Intel IGD regions\n"); goto disable_exit; } diff --git a/drivers/vfio/pci/vfio_pci_rdwr.c b/drivers/vfio/pci/vfio_pci_rdwr.c index 9e353c484ace..a0b5fc8e46f4 100644 --- a/drivers/vfio/pci/vfio_pci_rdwr.c +++ b/drivers/vfio/pci/vfio_pci_rdwr.c @@ -356,34 +356,60 @@ ssize_t vfio_pci_vga_rw(struct vfio_pci_device *vdev, char __user *buf, return done; } -static int vfio_pci_ioeventfd_handler(void *opaque, void *unused) +static void vfio_pci_ioeventfd_do_write(struct vfio_pci_ioeventfd *ioeventfd, + bool test_mem) { - struct vfio_pci_ioeventfd *ioeventfd = opaque; - switch (ioeventfd->count) { case 1: - vfio_pci_iowrite8(ioeventfd->vdev, ioeventfd->test_mem, + vfio_pci_iowrite8(ioeventfd->vdev, test_mem, ioeventfd->data, ioeventfd->addr); break; case 2: - vfio_pci_iowrite16(ioeventfd->vdev, ioeventfd->test_mem, + vfio_pci_iowrite16(ioeventfd->vdev, test_mem, ioeventfd->data, ioeventfd->addr); break; case 4: - vfio_pci_iowrite32(ioeventfd->vdev, ioeventfd->test_mem, + vfio_pci_iowrite32(ioeventfd->vdev, test_mem, ioeventfd->data, ioeventfd->addr); break; #ifdef iowrite64 case 8: - vfio_pci_iowrite64(ioeventfd->vdev, ioeventfd->test_mem, + vfio_pci_iowrite64(ioeventfd->vdev, test_mem, ioeventfd->data, ioeventfd->addr); break; #endif } +} + +static int vfio_pci_ioeventfd_handler(void *opaque, void *unused) +{ + struct vfio_pci_ioeventfd *ioeventfd = opaque; + struct vfio_pci_device *vdev = ioeventfd->vdev; + + if (ioeventfd->test_mem) { + if (!down_read_trylock(&vdev->memory_lock)) + return 1; /* Lock contended, use thread */ + if (!__vfio_pci_memory_enabled(vdev)) { + up_read(&vdev->memory_lock); + return 0; + } + } + + vfio_pci_ioeventfd_do_write(ioeventfd, false); + + if (ioeventfd->test_mem) + up_read(&vdev->memory_lock); return 0; } +static void vfio_pci_ioeventfd_thread(void *opaque, void *unused) +{ + struct vfio_pci_ioeventfd *ioeventfd = opaque; + + vfio_pci_ioeventfd_do_write(ioeventfd, ioeventfd->test_mem); +} + long vfio_pci_ioeventfd(struct vfio_pci_device *vdev, loff_t offset, uint64_t data, int count, int fd) { @@ -457,7 +483,8 @@ long vfio_pci_ioeventfd(struct vfio_pci_device *vdev, loff_t offset, ioeventfd->test_mem = vdev->pdev->resource[bar].flags & IORESOURCE_MEM; ret = vfio_virqfd_enable(ioeventfd, vfio_pci_ioeventfd_handler, - NULL, NULL, &ioeventfd->virqfd, fd); + vfio_pci_ioeventfd_thread, NULL, + &ioeventfd->virqfd, fd); if (ret) { kfree(ioeventfd); goto out_unlock; diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c index c0771a9567fb..fb4b385191f2 100644 --- a/drivers/vfio/platform/vfio_platform_common.c +++ b/drivers/vfio/platform/vfio_platform_common.c @@ -267,7 +267,7 @@ static int vfio_platform_open(void *device_data) ret = pm_runtime_get_sync(vdev->device); if (ret < 0) - goto err_pm; + goto err_rst; ret = vfio_platform_call_reset(vdev, &extra_dbg); if (ret && vdev->reset_required) { @@ -284,7 +284,6 @@ static int vfio_platform_open(void *device_data) err_rst: pm_runtime_put(vdev->device); -err_pm: vfio_platform_irq_cleanup(vdev); err_irq: vfio_platform_regions_cleanup(vdev); diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c index bb2684cc245e..67e827638995 100644 --- a/drivers/vfio/vfio_iommu_type1.c +++ b/drivers/vfio/vfio_iommu_type1.c @@ -1993,6 +1993,7 @@ static void vfio_iommu_iova_insert_copy(struct vfio_iommu *iommu, list_splice_tail(iova_copy, iova); } + static int vfio_iommu_type1_attach_group(void *iommu_data, struct iommu_group *iommu_group) { @@ -2009,18 +2010,10 @@ static int vfio_iommu_type1_attach_group(void *iommu_data, mutex_lock(&iommu->lock); - list_for_each_entry(d, &iommu->domain_list, next) { - if (find_iommu_group(d, iommu_group)) { - mutex_unlock(&iommu->lock); - return -EINVAL; - } - } - - if (iommu->external_domain) { - if (find_iommu_group(iommu->external_domain, iommu_group)) { - mutex_unlock(&iommu->lock); - return -EINVAL; - } + /* Check for duplicates */ + if (vfio_iommu_find_iommu_group(iommu, iommu_group)) { + mutex_unlock(&iommu->lock); + return -EINVAL; } group = kzalloc(sizeof(*group), GFP_KERNEL); diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c index a2dbc85e0b0d..2754f3069738 100644 --- a/drivers/vhost/vdpa.c +++ b/drivers/vhost/vdpa.c @@ -47,6 +47,7 @@ struct vhost_vdpa { int minor; struct eventfd_ctx *config_ctx; int in_batch; + struct vdpa_iova_range range; }; static DEFINE_IDA(vhost_vdpa_ida); @@ -103,6 +104,9 @@ static void vhost_vdpa_setup_vq_irq(struct vhost_vdpa *v, u16 qid) vq->call_ctx.producer.token = vq->call_ctx.ctx; vq->call_ctx.producer.irq = irq; ret = irq_bypass_register_producer(&vq->call_ctx.producer); + if (unlikely(ret)) + dev_info(&v->dev, "vq %u, irq bypass producer (token %p) registration fails, ret = %d\n", + qid, vq->call_ctx.producer.token, ret); } static void vhost_vdpa_unsetup_vq_irq(struct vhost_vdpa *v, u16 qid) @@ -337,6 +341,16 @@ static long vhost_vdpa_set_config_call(struct vhost_vdpa *v, u32 __user *argp) return 0; } +static long vhost_vdpa_get_iova_range(struct vhost_vdpa *v, u32 __user *argp) +{ + struct vhost_vdpa_iova_range range = { + .first = v->range.first, + .last = v->range.last, + }; + + return copy_to_user(argp, &range, sizeof(range)); +} + static long vhost_vdpa_vring_ioctl(struct vhost_vdpa *v, unsigned int cmd, void __user *argp) { @@ -421,12 +435,11 @@ static long vhost_vdpa_unlocked_ioctl(struct file *filep, void __user *argp = (void __user *)arg; u64 __user *featurep = argp; u64 features; - long r; + long r = 0; if (cmd == VHOST_SET_BACKEND_FEATURES) { - r = copy_from_user(&features, featurep, sizeof(features)); - if (r) - return r; + if (copy_from_user(&features, featurep, sizeof(features))) + return -EFAULT; if (features & ~VHOST_VDPA_BACKEND_FEATURES) return -EOPNOTSUPP; vhost_set_backend_features(&v->vdev, features); @@ -469,7 +482,11 @@ static long vhost_vdpa_unlocked_ioctl(struct file *filep, break; case VHOST_GET_BACKEND_FEATURES: features = VHOST_VDPA_BACKEND_FEATURES; - r = copy_to_user(featurep, &features, sizeof(features)); + if (copy_to_user(featurep, &features, sizeof(features))) + r = -EFAULT; + break; + case VHOST_VDPA_GET_IOVA_RANGE: + r = vhost_vdpa_get_iova_range(v, argp); break; default: r = vhost_dev_ioctl(&v->vdev, cmd, argp); @@ -588,19 +605,25 @@ static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v, struct vhost_dev *dev = &v->vdev; struct vhost_iotlb *iotlb = dev->iotlb; struct page **page_list; - struct vm_area_struct **vmas; + unsigned long list_size = PAGE_SIZE / sizeof(struct page *); unsigned int gup_flags = FOLL_LONGTERM; - unsigned long map_pfn, last_pfn = 0; - unsigned long npages, lock_limit; - unsigned long i, nmap = 0; + unsigned long npages, cur_base, map_pfn, last_pfn = 0; + unsigned long locked, lock_limit, pinned, i; u64 iova = msg->iova; - long pinned; int ret = 0; + if (msg->iova < v->range.first || + msg->iova + msg->size - 1 > v->range.last) + return -EINVAL; + if (vhost_iotlb_itree_first(iotlb, msg->iova, msg->iova + msg->size - 1)) return -EEXIST; + page_list = (struct page **) __get_free_page(GFP_KERNEL); + if (!page_list) + return -ENOMEM; + if (msg->perm & VHOST_ACCESS_WO) gup_flags |= FOLL_WRITE; @@ -608,86 +631,61 @@ static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v, if (!npages) return -EINVAL; - page_list = kvmalloc_array(npages, sizeof(struct page *), GFP_KERNEL); - vmas = kvmalloc_array(npages, sizeof(struct vm_area_struct *), - GFP_KERNEL); - if (!page_list || !vmas) { - ret = -ENOMEM; - goto free; - } - mmap_read_lock(dev->mm); + locked = atomic64_add_return(npages, &dev->mm->pinned_vm); lock_limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT; - if (npages + atomic64_read(&dev->mm->pinned_vm) > lock_limit) { - ret = -ENOMEM; - goto unlock; - } - pinned = pin_user_pages(msg->uaddr & PAGE_MASK, npages, gup_flags, - page_list, vmas); - if (npages != pinned) { - if (pinned < 0) { - ret = pinned; - } else { - unpin_user_pages(page_list, pinned); - ret = -ENOMEM; - } - goto unlock; + if (locked > lock_limit) { + ret = -ENOMEM; + goto out; } + cur_base = msg->uaddr & PAGE_MASK; iova &= PAGE_MASK; - map_pfn = page_to_pfn(page_list[0]); - - /* One more iteration to avoid extra vdpa_map() call out of loop. */ - for (i = 0; i <= npages; i++) { - unsigned long this_pfn; - u64 csize; - - /* The last chunk may have no valid PFN next to it */ - this_pfn = i < npages ? page_to_pfn(page_list[i]) : -1UL; - - if (last_pfn && (this_pfn == -1UL || - this_pfn != last_pfn + 1)) { - /* Pin a contiguous chunk of memory */ - csize = last_pfn - map_pfn + 1; - ret = vhost_vdpa_map(v, iova, csize << PAGE_SHIFT, - map_pfn << PAGE_SHIFT, - msg->perm); - if (ret) { - /* - * Unpin the rest chunks of memory on the - * flight with no corresponding vdpa_map() - * calls having been made yet. On the other - * hand, vdpa_unmap() in the failure path - * is in charge of accounting the number of - * pinned pages for its own. - * This asymmetrical pattern of accounting - * is for efficiency to pin all pages at - * once, while there is no other callsite - * of vdpa_map() than here above. - */ - unpin_user_pages(&page_list[nmap], - npages - nmap); - goto out; + + while (npages) { + pinned = min_t(unsigned long, npages, list_size); + ret = pin_user_pages(cur_base, pinned, + gup_flags, page_list, NULL); + if (ret != pinned) + goto out; + + if (!last_pfn) + map_pfn = page_to_pfn(page_list[0]); + + for (i = 0; i < ret; i++) { + unsigned long this_pfn = page_to_pfn(page_list[i]); + u64 csize; + + if (last_pfn && (this_pfn != last_pfn + 1)) { + /* Pin a contiguous chunk of memory */ + csize = (last_pfn - map_pfn + 1) << PAGE_SHIFT; + if (vhost_vdpa_map(v, iova, csize, + map_pfn << PAGE_SHIFT, + msg->perm)) + goto out; + map_pfn = this_pfn; + iova += csize; } - atomic64_add(csize, &dev->mm->pinned_vm); - nmap += csize; - iova += csize << PAGE_SHIFT; - map_pfn = this_pfn; + + last_pfn = this_pfn; } - last_pfn = this_pfn; + + cur_base += ret << PAGE_SHIFT; + npages -= ret; } - WARN_ON(nmap != npages); + /* Pin the rest chunk */ + ret = vhost_vdpa_map(v, iova, (last_pfn - map_pfn + 1) << PAGE_SHIFT, + map_pfn << PAGE_SHIFT, msg->perm); out: - if (ret) + if (ret) { vhost_vdpa_unmap(v, msg->iova, msg->size); -unlock: + atomic64_sub(npages, &dev->mm->pinned_vm); + } mmap_read_unlock(dev->mm); -free: - kvfree(vmas); - kvfree(page_list); + free_page((unsigned long)page_list); return ret; } @@ -783,6 +781,27 @@ static void vhost_vdpa_free_domain(struct vhost_vdpa *v) v->domain = NULL; } +static void vhost_vdpa_set_iova_range(struct vhost_vdpa *v) +{ + struct vdpa_iova_range *range = &v->range; + struct iommu_domain_geometry geo; + struct vdpa_device *vdpa = v->vdpa; + const struct vdpa_config_ops *ops = vdpa->config; + + if (ops->get_iova_range) { + *range = ops->get_iova_range(vdpa); + } else if (v->domain && + !iommu_domain_get_attr(v->domain, + DOMAIN_ATTR_GEOMETRY, &geo) && + geo.force_aperture) { + range->first = geo.aperture_start; + range->last = geo.aperture_end; + } else { + range->first = 0; + range->last = ULLONG_MAX; + } +} + static int vhost_vdpa_open(struct inode *inode, struct file *filep) { struct vhost_vdpa *v; @@ -823,6 +842,8 @@ static int vhost_vdpa_open(struct inode *inode, struct file *filep) if (r) goto err_init_iotlb; + vhost_vdpa_set_iova_range(v); + filep->private_data = v; return 0; diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c index 02411d89cb46..e36fb1a0ecdb 100644 --- a/drivers/video/fbdev/hyperv_fb.c +++ b/drivers/video/fbdev/hyperv_fb.c @@ -1114,8 +1114,15 @@ static int hvfb_getmem(struct hv_device *hdev, struct fb_info *info) getmem_done: remove_conflicting_framebuffers(info->apertures, KBUILD_MODNAME, false); - if (!gen2vm) + + if (gen2vm) { + /* framebuffer is reallocated, clear screen_info to avoid misuse from kexec */ + screen_info.lfb_size = 0; + screen_info.lfb_base = 0; + screen_info.orig_video_isVGA = 0; + } else { pci_dev_put(pdev); + } kfree(info->apertures); return 0; diff --git a/fs/afs/cell.c b/fs/afs/cell.c index 52233fa6195f..887b673f6223 100644 --- a/fs/afs/cell.c +++ b/fs/afs/cell.c @@ -589,7 +589,7 @@ struct afs_cell *afs_use_cell(struct afs_cell *cell, enum afs_cell_trace reason) */ void afs_unuse_cell(struct afs_net *net, struct afs_cell *cell, enum afs_cell_trace reason) { - unsigned int debug_id = cell->debug_id; + unsigned int debug_id; time64_t now, expire_delay; int u, a; @@ -604,6 +604,7 @@ void afs_unuse_cell(struct afs_net *net, struct afs_cell *cell, enum afs_cell_tr if (cell->vl_servers->nr_servers) expire_delay = afs_cell_gc_delay; + debug_id = cell->debug_id; u = atomic_read(&cell->ref); a = atomic_dec_return(&cell->active); trace_afs_cell(debug_id, u, a, reason); diff --git a/fs/afs/dir.c b/fs/afs/dir.c index 1d2e61e0ab04..1bb5b9d7f0a2 100644 --- a/fs/afs/dir.c +++ b/fs/afs/dir.c @@ -281,8 +281,7 @@ retry: if (ret < 0) goto error; - set_page_private(req->pages[i], 1); - SetPagePrivate(req->pages[i]); + attach_page_private(req->pages[i], (void *)1); unlock_page(req->pages[i]); i++; } else { @@ -1975,8 +1974,7 @@ static int afs_dir_releasepage(struct page *page, gfp_t gfp_flags) _enter("{{%llx:%llu}[%lu]}", dvnode->fid.vid, dvnode->fid.vnode, page->index); - set_page_private(page, 0); - ClearPagePrivate(page); + detach_page_private(page); /* The directory will need reloading. */ if (test_and_clear_bit(AFS_VNODE_DIR_VALID, &dvnode->flags)) @@ -2003,8 +2001,6 @@ static void afs_dir_invalidatepage(struct page *page, unsigned int offset, afs_stat_v(dvnode, n_inval); /* we clean up only if the entire page is being invalidated */ - if (offset == 0 && length == PAGE_SIZE) { - set_page_private(page, 0); - ClearPagePrivate(page); - } + if (offset == 0 && length == PAGE_SIZE) + detach_page_private(page); } diff --git a/fs/afs/dir_edit.c b/fs/afs/dir_edit.c index b108528bf010..2ffe09abae7f 100644 --- a/fs/afs/dir_edit.c +++ b/fs/afs/dir_edit.c @@ -243,10 +243,8 @@ void afs_edit_dir_add(struct afs_vnode *vnode, index, gfp); if (!page) goto error; - if (!PagePrivate(page)) { - set_page_private(page, 1); - SetPagePrivate(page); - } + if (!PagePrivate(page)) + attach_page_private(page, (void *)1); dir_page = kmap(page); } diff --git a/fs/afs/file.c b/fs/afs/file.c index 371d1488cc54..85f5adf21aa0 100644 --- a/fs/afs/file.c +++ b/fs/afs/file.c @@ -33,6 +33,7 @@ const struct file_operations afs_file_operations = { .write_iter = afs_file_write, .mmap = afs_file_mmap, .splice_read = generic_file_splice_read, + .splice_write = iter_file_splice_write, .fsync = afs_fsync, .lock = afs_lock, .flock = afs_flock, @@ -601,6 +602,63 @@ static int afs_readpages(struct file *file, struct address_space *mapping, } /* + * Adjust the dirty region of the page on truncation or full invalidation, + * getting rid of the markers altogether if the region is entirely invalidated. + */ +static void afs_invalidate_dirty(struct page *page, unsigned int offset, + unsigned int length) +{ + struct afs_vnode *vnode = AFS_FS_I(page->mapping->host); + unsigned long priv; + unsigned int f, t, end = offset + length; + + priv = page_private(page); + + /* we clean up only if the entire page is being invalidated */ + if (offset == 0 && length == thp_size(page)) + goto full_invalidate; + + /* If the page was dirtied by page_mkwrite(), the PTE stays writable + * and we don't get another notification to tell us to expand it + * again. + */ + if (afs_is_page_dirty_mmapped(priv)) + return; + + /* We may need to shorten the dirty region */ + f = afs_page_dirty_from(priv); + t = afs_page_dirty_to(priv); + + if (t <= offset || f >= end) + return; /* Doesn't overlap */ + + if (f < offset && t > end) + return; /* Splits the dirty region - just absorb it */ + + if (f >= offset && t <= end) + goto undirty; + + if (f < offset) + t = offset; + else + f = end; + if (f == t) + goto undirty; + + priv = afs_page_dirty(f, t); + set_page_private(page, priv); + trace_afs_page_dirty(vnode, tracepoint_string("trunc"), page->index, priv); + return; + +undirty: + trace_afs_page_dirty(vnode, tracepoint_string("undirty"), page->index, priv); + clear_page_dirty_for_io(page); +full_invalidate: + priv = (unsigned long)detach_page_private(page); + trace_afs_page_dirty(vnode, tracepoint_string("inval"), page->index, priv); +} + +/* * invalidate part or all of a page * - release a page and clean up its private data if offset is 0 (indicating * the entire page) @@ -608,31 +666,23 @@ static int afs_readpages(struct file *file, struct address_space *mapping, static void afs_invalidatepage(struct page *page, unsigned int offset, unsigned int length) { - struct afs_vnode *vnode = AFS_FS_I(page->mapping->host); - unsigned long priv; - _enter("{%lu},%u,%u", page->index, offset, length); BUG_ON(!PageLocked(page)); +#ifdef CONFIG_AFS_FSCACHE /* we clean up only if the entire page is being invalidated */ if (offset == 0 && length == PAGE_SIZE) { -#ifdef CONFIG_AFS_FSCACHE if (PageFsCache(page)) { struct afs_vnode *vnode = AFS_FS_I(page->mapping->host); fscache_wait_on_page_write(vnode->cache, page); fscache_uncache_page(vnode->cache, page); } + } #endif - if (PagePrivate(page)) { - priv = page_private(page); - trace_afs_page_dirty(vnode, tracepoint_string("inval"), - page->index, priv); - set_page_private(page, 0); - ClearPagePrivate(page); - } - } + if (PagePrivate(page)) + afs_invalidate_dirty(page, offset, length); _leave(""); } @@ -660,11 +710,9 @@ static int afs_releasepage(struct page *page, gfp_t gfp_flags) #endif if (PagePrivate(page)) { - priv = page_private(page); + priv = (unsigned long)detach_page_private(page); trace_afs_page_dirty(vnode, tracepoint_string("rel"), page->index, priv); - set_page_private(page, 0); - ClearPagePrivate(page); } /* indicate that the page can be released */ diff --git a/fs/afs/internal.h b/fs/afs/internal.h index 81b0485fd22a..14d5d75f4b6e 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -812,6 +812,7 @@ struct afs_operation { pgoff_t last; /* last page in mapping to deal with */ unsigned first_offset; /* offset into mapping[first] */ unsigned last_to; /* amount of mapping[last] */ + bool laundering; /* Laundering page, PG_writeback not set */ } store; struct { struct iattr *attr; @@ -857,6 +858,62 @@ struct afs_vnode_cache_aux { u64 data_version; } __packed; +/* + * We use page->private to hold the amount of the page that we've written to, + * splitting the field into two parts. However, we need to represent a range + * 0...PAGE_SIZE, so we reduce the resolution if the size of the page + * exceeds what we can encode. + */ +#ifdef CONFIG_64BIT +#define __AFS_PAGE_PRIV_MASK 0x7fffffffUL +#define __AFS_PAGE_PRIV_SHIFT 32 +#define __AFS_PAGE_PRIV_MMAPPED 0x80000000UL +#else +#define __AFS_PAGE_PRIV_MASK 0x7fffUL +#define __AFS_PAGE_PRIV_SHIFT 16 +#define __AFS_PAGE_PRIV_MMAPPED 0x8000UL +#endif + +static inline unsigned int afs_page_dirty_resolution(void) +{ + int shift = PAGE_SHIFT - (__AFS_PAGE_PRIV_SHIFT - 1); + return (shift > 0) ? shift : 0; +} + +static inline size_t afs_page_dirty_from(unsigned long priv) +{ + unsigned long x = priv & __AFS_PAGE_PRIV_MASK; + + /* The lower bound is inclusive */ + return x << afs_page_dirty_resolution(); +} + +static inline size_t afs_page_dirty_to(unsigned long priv) +{ + unsigned long x = (priv >> __AFS_PAGE_PRIV_SHIFT) & __AFS_PAGE_PRIV_MASK; + + /* The upper bound is immediately beyond the region */ + return (x + 1) << afs_page_dirty_resolution(); +} + +static inline unsigned long afs_page_dirty(size_t from, size_t to) +{ + unsigned int res = afs_page_dirty_resolution(); + from >>= res; + to = (to - 1) >> res; + return (to << __AFS_PAGE_PRIV_SHIFT) | from; +} + +static inline unsigned long afs_page_dirty_mmapped(unsigned long priv) +{ + return priv | __AFS_PAGE_PRIV_MMAPPED; +} + +static inline bool afs_is_page_dirty_mmapped(unsigned long priv) +{ + return priv & __AFS_PAGE_PRIV_MMAPPED; +} + #include <trace/events/afs.h> /*****************************************************************************/ diff --git a/fs/afs/write.c b/fs/afs/write.c index da12abd6db21..50371207f327 100644 --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -76,7 +76,7 @@ static int afs_fill_page(struct afs_vnode *vnode, struct key *key, */ int afs_write_begin(struct file *file, struct address_space *mapping, loff_t pos, unsigned len, unsigned flags, - struct page **pagep, void **fsdata) + struct page **_page, void **fsdata) { struct afs_vnode *vnode = AFS_FS_I(file_inode(file)); struct page *page; @@ -90,11 +90,6 @@ int afs_write_begin(struct file *file, struct address_space *mapping, _enter("{%llx:%llu},{%lx},%u,%u", vnode->fid.vid, vnode->fid.vnode, index, from, to); - /* We want to store information about how much of a page is altered in - * page->private. - */ - BUILD_BUG_ON(PAGE_SIZE > 32768 && sizeof(page->private) < 8); - page = grab_cache_page_write_begin(mapping, index, flags); if (!page) return -ENOMEM; @@ -110,9 +105,6 @@ int afs_write_begin(struct file *file, struct address_space *mapping, SetPageUptodate(page); } - /* page won't leak in error case: it eventually gets cleaned off LRU */ - *pagep = page; - try_again: /* See if this page is already partially written in a way that we can * merge the new write with. @@ -120,8 +112,8 @@ try_again: t = f = 0; if (PagePrivate(page)) { priv = page_private(page); - f = priv & AFS_PRIV_MAX; - t = priv >> AFS_PRIV_SHIFT; + f = afs_page_dirty_from(priv); + t = afs_page_dirty_to(priv); ASSERTCMP(f, <=, t); } @@ -138,21 +130,9 @@ try_again: if (!test_bit(AFS_VNODE_NEW_CONTENT, &vnode->flags) && (to < f || from > t)) goto flush_conflicting_write; - if (from < f) - f = from; - if (to > t) - t = to; - } else { - f = from; - t = to; } - priv = (unsigned long)t << AFS_PRIV_SHIFT; - priv |= f; - trace_afs_page_dirty(vnode, tracepoint_string("begin"), - page->index, priv); - SetPagePrivate(page); - set_page_private(page, priv); + *_page = page; _leave(" = 0"); return 0; @@ -162,17 +142,18 @@ try_again: flush_conflicting_write: _debug("flush conflict"); ret = write_one_page(page); - if (ret < 0) { - _leave(" = %d", ret); - return ret; - } + if (ret < 0) + goto error; ret = lock_page_killable(page); - if (ret < 0) { - _leave(" = %d", ret); - return ret; - } + if (ret < 0) + goto error; goto try_again; + +error: + put_page(page); + _leave(" = %d", ret); + return ret; } /* @@ -184,6 +165,9 @@ int afs_write_end(struct file *file, struct address_space *mapping, { struct afs_vnode *vnode = AFS_FS_I(file_inode(file)); struct key *key = afs_file_key(file); + unsigned long priv; + unsigned int f, from = pos & (PAGE_SIZE - 1); + unsigned int t, to = from + copied; loff_t i_size, maybe_i_size; int ret; @@ -215,6 +199,25 @@ int afs_write_end(struct file *file, struct address_space *mapping, SetPageUptodate(page); } + if (PagePrivate(page)) { + priv = page_private(page); + f = afs_page_dirty_from(priv); + t = afs_page_dirty_to(priv); + if (from < f) + f = from; + if (to > t) + t = to; + priv = afs_page_dirty(f, t); + set_page_private(page, priv); + trace_afs_page_dirty(vnode, tracepoint_string("dirty+"), + page->index, priv); + } else { + priv = afs_page_dirty(from, to); + attach_page_private(page, (void *)priv); + trace_afs_page_dirty(vnode, tracepoint_string("dirty"), + page->index, priv); + } + set_page_dirty(page); if (PageDirty(page)) _debug("dirtied"); @@ -334,10 +337,9 @@ static void afs_pages_written_back(struct afs_vnode *vnode, ASSERTCMP(pv.nr, ==, count); for (loop = 0; loop < count; loop++) { - priv = page_private(pv.pages[loop]); + priv = (unsigned long)detach_page_private(pv.pages[loop]); trace_afs_page_dirty(vnode, tracepoint_string("clear"), pv.pages[loop]->index, priv); - set_page_private(pv.pages[loop], 0); end_page_writeback(pv.pages[loop]); } first += count; @@ -396,7 +398,8 @@ static void afs_store_data_success(struct afs_operation *op) op->ctime = op->file[0].scb.status.mtime_client; afs_vnode_commit_status(op, &op->file[0]); if (op->error == 0) { - afs_pages_written_back(vnode, op->store.first, op->store.last); + if (!op->store.laundering) + afs_pages_written_back(vnode, op->store.first, op->store.last); afs_stat_v(vnode, n_stores); atomic_long_add((op->store.last * PAGE_SIZE + op->store.last_to) - (op->store.first * PAGE_SIZE + op->store.first_offset), @@ -415,7 +418,7 @@ static const struct afs_operation_ops afs_store_data_operation = { */ static int afs_store_data(struct address_space *mapping, pgoff_t first, pgoff_t last, - unsigned offset, unsigned to) + unsigned offset, unsigned to, bool laundering) { struct afs_vnode *vnode = AFS_FS_I(mapping->host); struct afs_operation *op; @@ -448,6 +451,7 @@ static int afs_store_data(struct address_space *mapping, op->store.last = last; op->store.first_offset = offset; op->store.last_to = to; + op->store.laundering = laundering; op->mtime = vnode->vfs_inode.i_mtime; op->flags |= AFS_OPERATION_UNINTR; op->ops = &afs_store_data_operation; @@ -509,8 +513,8 @@ static int afs_write_back_from_locked_page(struct address_space *mapping, */ start = primary_page->index; priv = page_private(primary_page); - offset = priv & AFS_PRIV_MAX; - to = priv >> AFS_PRIV_SHIFT; + offset = afs_page_dirty_from(priv); + to = afs_page_dirty_to(priv); trace_afs_page_dirty(vnode, tracepoint_string("store"), primary_page->index, priv); @@ -555,8 +559,8 @@ static int afs_write_back_from_locked_page(struct address_space *mapping, } priv = page_private(page); - f = priv & AFS_PRIV_MAX; - t = priv >> AFS_PRIV_SHIFT; + f = afs_page_dirty_from(priv); + t = afs_page_dirty_to(priv); if (f != 0 && !test_bit(AFS_VNODE_NEW_CONTENT, &vnode->flags)) { unlock_page(page); @@ -601,7 +605,7 @@ no_more: if (end > i_size) to = i_size & ~PAGE_MASK; - ret = afs_store_data(mapping, first, last, offset, to); + ret = afs_store_data(mapping, first, last, offset, to, false); switch (ret) { case 0: ret = count; @@ -857,12 +861,14 @@ vm_fault_t afs_page_mkwrite(struct vm_fault *vmf) */ wait_on_page_writeback(vmf->page); - priv = (unsigned long)PAGE_SIZE << AFS_PRIV_SHIFT; /* To */ - priv |= 0; /* From */ + priv = afs_page_dirty(0, PAGE_SIZE); + priv = afs_page_dirty_mmapped(priv); trace_afs_page_dirty(vnode, tracepoint_string("mkwrite"), vmf->page->index, priv); - SetPagePrivate(vmf->page); - set_page_private(vmf->page, priv); + if (PagePrivate(vmf->page)) + set_page_private(vmf->page, priv); + else + attach_page_private(vmf->page, (void *)priv); file_update_time(file); sb_end_pagefault(inode->i_sb); @@ -915,19 +921,18 @@ int afs_launder_page(struct page *page) f = 0; t = PAGE_SIZE; if (PagePrivate(page)) { - f = priv & AFS_PRIV_MAX; - t = priv >> AFS_PRIV_SHIFT; + f = afs_page_dirty_from(priv); + t = afs_page_dirty_to(priv); } trace_afs_page_dirty(vnode, tracepoint_string("launder"), page->index, priv); - ret = afs_store_data(mapping, page->index, page->index, t, f); + ret = afs_store_data(mapping, page->index, page->index, t, f, true); } + priv = (unsigned long)detach_page_private(page); trace_afs_page_dirty(vnode, tracepoint_string("laundered"), page->index, priv); - set_page_private(page, 0); - ClearPagePrivate(page); #ifdef CONFIG_AFS_FSCACHE if (PageFsCache(page)) { diff --git a/fs/afs/xattr.c b/fs/afs/xattr.c index 84f3c4f57531..95c573dcda11 100644 --- a/fs/afs/xattr.c +++ b/fs/afs/xattr.c @@ -85,7 +85,7 @@ static int afs_xattr_get_acl(const struct xattr_handler *handler, if (acl->size <= size) memcpy(buffer, acl->data, acl->size); else - op->error = -ERANGE; + ret = -ERANGE; } } @@ -148,11 +148,6 @@ static const struct xattr_handler afs_xattr_afs_acl_handler = { .set = afs_xattr_set_acl, }; -static void yfs_acl_put(struct afs_operation *op) -{ - yfs_free_opaque_acl(op->yacl); -} - static const struct afs_operation_ops yfs_fetch_opaque_acl_operation = { .issue_yfs_rpc = yfs_fs_fetch_opaque_acl, .success = afs_acl_success, @@ -246,7 +241,7 @@ error: static const struct afs_operation_ops yfs_store_opaque_acl2_operation = { .issue_yfs_rpc = yfs_fs_store_opaque_acl2, .success = afs_acl_success, - .put = yfs_acl_put, + .put = afs_acl_put, }; /* diff --git a/fs/afs/yfsclient.c b/fs/afs/yfsclient.c index 3b1239b7e90d..bd787e71a657 100644 --- a/fs/afs/yfsclient.c +++ b/fs/afs/yfsclient.c @@ -1990,6 +1990,7 @@ void yfs_fs_store_opaque_acl2(struct afs_operation *op) memcpy(bp, acl->data, acl->size); if (acl->size != size) memset((void *)bp + acl->size, 0, size - acl->size); + bp += size / sizeof(__be32); yfs_check_req(call, bp); trace_afs_make_fs_call(call, &vp->fid); diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index b6b3d052ca86..fa50e8936f5f 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -1690,7 +1690,7 @@ struct elf_thread_core_info { struct elf_thread_core_info *next; struct task_struct *task; struct elf_prstatus prstatus; - struct memelfnote notes[0]; + struct memelfnote notes[]; }; struct elf_note_info { diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index b3268f4ea5f3..771a036867dc 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -544,7 +544,18 @@ static int resolve_indirect_ref(struct btrfs_fs_info *fs_info, int level = ref->level; struct btrfs_key search_key = ref->key_for_search; - root = btrfs_get_fs_root(fs_info, ref->root_id, false); + /* + * If we're search_commit_root we could possibly be holding locks on + * other tree nodes. This happens when qgroups does backref walks when + * adding new delayed refs. To deal with this we need to look in cache + * for the root, and if we don't find it then we need to search the + * tree_root's commit root, thus the btrfs_get_fs_root_commit_root usage + * here. + */ + if (path->search_commit_root) + root = btrfs_get_fs_root_commit_root(fs_info, path, ref->root_id); + else + root = btrfs_get_fs_root(fs_info, ref->root_id, false); if (IS_ERR(root)) { ret = PTR_ERR(root); goto out_free; diff --git a/fs/btrfs/block-group.c b/fs/btrfs/block-group.c index c0f1d6818df7..3ba6f3839d39 100644 --- a/fs/btrfs/block-group.c +++ b/fs/btrfs/block-group.c @@ -2024,6 +2024,7 @@ int btrfs_read_block_groups(struct btrfs_fs_info *info) key.offset = 0; btrfs_release_path(path); } + btrfs_release_path(path); list_for_each_entry(space_info, &info->space_info, list) { int i; diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index aac3d6f4e35b..0378933d163c 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -3564,6 +3564,8 @@ struct reada_control *btrfs_reada_add(struct btrfs_root *root, int btrfs_reada_wait(void *handle); void btrfs_reada_detach(void *handle); int btree_readahead_hook(struct extent_buffer *eb, int err); +void btrfs_reada_remove_dev(struct btrfs_device *dev); +void btrfs_reada_undo_remove_dev(struct btrfs_device *dev); static inline int is_fstree(u64 rootid) { diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c index 4a0243cb9d97..5b9e3f3ace22 100644 --- a/fs/btrfs/dev-replace.c +++ b/fs/btrfs/dev-replace.c @@ -688,6 +688,9 @@ static int btrfs_dev_replace_finishing(struct btrfs_fs_info *fs_info, } btrfs_wait_ordered_roots(fs_info, U64_MAX, 0, (u64)-1); + if (!scrub_ret) + btrfs_reada_remove_dev(src_device); + /* * We have to use this loop approach because at this point src_device * has to be available for transaction commit to complete, yet new @@ -696,6 +699,7 @@ static int btrfs_dev_replace_finishing(struct btrfs_fs_info *fs_info, while (1) { trans = btrfs_start_transaction(root, 0); if (IS_ERR(trans)) { + btrfs_reada_undo_remove_dev(src_device); mutex_unlock(&dev_replace->lock_finishing_cancel_unmount); return PTR_ERR(trans); } @@ -746,6 +750,7 @@ error: up_write(&dev_replace->rwsem); mutex_unlock(&fs_info->chunk_mutex); mutex_unlock(&fs_info->fs_devices->device_list_mutex); + btrfs_reada_undo_remove_dev(src_device); btrfs_rm_dev_replace_blocked(fs_info); if (tgt_device) btrfs_destroy_dev_replace_tgtdev(tgt_device); diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 8e3438672a82..af97ddcc6b3e 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1281,32 +1281,26 @@ int btrfs_add_log_tree(struct btrfs_trans_handle *trans, return 0; } -struct btrfs_root *btrfs_read_tree_root(struct btrfs_root *tree_root, - struct btrfs_key *key) +static struct btrfs_root *read_tree_root_path(struct btrfs_root *tree_root, + struct btrfs_path *path, + struct btrfs_key *key) { struct btrfs_root *root; struct btrfs_fs_info *fs_info = tree_root->fs_info; - struct btrfs_path *path; u64 generation; int ret; int level; - path = btrfs_alloc_path(); - if (!path) - return ERR_PTR(-ENOMEM); - root = btrfs_alloc_root(fs_info, key->objectid, GFP_NOFS); - if (!root) { - ret = -ENOMEM; - goto alloc_fail; - } + if (!root) + return ERR_PTR(-ENOMEM); ret = btrfs_find_root(tree_root, key, path, &root->root_item, &root->root_key); if (ret) { if (ret > 0) ret = -ENOENT; - goto find_fail; + goto fail; } generation = btrfs_root_generation(&root->root_item); @@ -1317,21 +1311,31 @@ struct btrfs_root *btrfs_read_tree_root(struct btrfs_root *tree_root, if (IS_ERR(root->node)) { ret = PTR_ERR(root->node); root->node = NULL; - goto find_fail; + goto fail; } else if (!btrfs_buffer_uptodate(root->node, generation, 0)) { ret = -EIO; - goto find_fail; + goto fail; } root->commit_root = btrfs_root_node(root); -out: - btrfs_free_path(path); return root; - -find_fail: +fail: btrfs_put_root(root); -alloc_fail: - root = ERR_PTR(ret); - goto out; + return ERR_PTR(ret); +} + +struct btrfs_root *btrfs_read_tree_root(struct btrfs_root *tree_root, + struct btrfs_key *key) +{ + struct btrfs_root *root; + struct btrfs_path *path; + + path = btrfs_alloc_path(); + if (!path) + return ERR_PTR(-ENOMEM); + root = read_tree_root_path(tree_root, path, key); + btrfs_free_path(path); + + return root; } /* @@ -1419,6 +1423,31 @@ static struct btrfs_root *btrfs_lookup_fs_root(struct btrfs_fs_info *fs_info, return root; } +static struct btrfs_root *btrfs_get_global_root(struct btrfs_fs_info *fs_info, + u64 objectid) +{ + if (objectid == BTRFS_ROOT_TREE_OBJECTID) + return btrfs_grab_root(fs_info->tree_root); + if (objectid == BTRFS_EXTENT_TREE_OBJECTID) + return btrfs_grab_root(fs_info->extent_root); + if (objectid == BTRFS_CHUNK_TREE_OBJECTID) + return btrfs_grab_root(fs_info->chunk_root); + if (objectid == BTRFS_DEV_TREE_OBJECTID) + return btrfs_grab_root(fs_info->dev_root); + if (objectid == BTRFS_CSUM_TREE_OBJECTID) + return btrfs_grab_root(fs_info->csum_root); + if (objectid == BTRFS_QUOTA_TREE_OBJECTID) + return btrfs_grab_root(fs_info->quota_root) ? + fs_info->quota_root : ERR_PTR(-ENOENT); + if (objectid == BTRFS_UUID_TREE_OBJECTID) + return btrfs_grab_root(fs_info->uuid_root) ? + fs_info->uuid_root : ERR_PTR(-ENOENT); + if (objectid == BTRFS_FREE_SPACE_TREE_OBJECTID) + return btrfs_grab_root(fs_info->free_space_root) ? + fs_info->free_space_root : ERR_PTR(-ENOENT); + return NULL; +} + int btrfs_insert_fs_root(struct btrfs_fs_info *fs_info, struct btrfs_root *root) { @@ -1518,25 +1547,9 @@ static struct btrfs_root *btrfs_get_root_ref(struct btrfs_fs_info *fs_info, struct btrfs_key key; int ret; - if (objectid == BTRFS_ROOT_TREE_OBJECTID) - return btrfs_grab_root(fs_info->tree_root); - if (objectid == BTRFS_EXTENT_TREE_OBJECTID) - return btrfs_grab_root(fs_info->extent_root); - if (objectid == BTRFS_CHUNK_TREE_OBJECTID) - return btrfs_grab_root(fs_info->chunk_root); - if (objectid == BTRFS_DEV_TREE_OBJECTID) - return btrfs_grab_root(fs_info->dev_root); - if (objectid == BTRFS_CSUM_TREE_OBJECTID) - return btrfs_grab_root(fs_info->csum_root); - if (objectid == BTRFS_QUOTA_TREE_OBJECTID) - return btrfs_grab_root(fs_info->quota_root) ? - fs_info->quota_root : ERR_PTR(-ENOENT); - if (objectid == BTRFS_UUID_TREE_OBJECTID) - return btrfs_grab_root(fs_info->uuid_root) ? - fs_info->uuid_root : ERR_PTR(-ENOENT); - if (objectid == BTRFS_FREE_SPACE_TREE_OBJECTID) - return btrfs_grab_root(fs_info->free_space_root) ? - fs_info->free_space_root : ERR_PTR(-ENOENT); + root = btrfs_get_global_root(fs_info, objectid); + if (root) + return root; again: root = btrfs_lookup_fs_root(fs_info, objectid); if (root) { @@ -1622,6 +1635,52 @@ struct btrfs_root *btrfs_get_new_fs_root(struct btrfs_fs_info *fs_info, } /* + * btrfs_get_fs_root_commit_root - return a root for the given objectid + * @fs_info: the fs_info + * @objectid: the objectid we need to lookup + * + * This is exclusively used for backref walking, and exists specifically because + * of how qgroups does lookups. Qgroups will do a backref lookup at delayed ref + * creation time, which means we may have to read the tree_root in order to look + * up a fs root that is not in memory. If the root is not in memory we will + * read the tree root commit root and look up the fs root from there. This is a + * temporary root, it will not be inserted into the radix tree as it doesn't + * have the most uptodate information, it'll simply be discarded once the + * backref code is finished using the root. + */ +struct btrfs_root *btrfs_get_fs_root_commit_root(struct btrfs_fs_info *fs_info, + struct btrfs_path *path, + u64 objectid) +{ + struct btrfs_root *root; + struct btrfs_key key; + + ASSERT(path->search_commit_root && path->skip_locking); + + /* + * This can return -ENOENT if we ask for a root that doesn't exist, but + * since this is called via the backref walking code we won't be looking + * up a root that doesn't exist, unless there's corruption. So if root + * != NULL just return it. + */ + root = btrfs_get_global_root(fs_info, objectid); + if (root) + return root; + + root = btrfs_lookup_fs_root(fs_info, objectid); + if (root) + return root; + + key.objectid = objectid; + key.type = BTRFS_ROOT_ITEM_KEY; + key.offset = (u64)-1; + root = read_tree_root_path(fs_info->tree_root, path, &key); + btrfs_release_path(path); + + return root; +} + +/* * called by the kthread helper functions to finally call the bio end_io * functions. This is where read checksum verification actually happens */ diff --git a/fs/btrfs/disk-io.h b/fs/btrfs/disk-io.h index fee69ced58b4..182540bdcea0 100644 --- a/fs/btrfs/disk-io.h +++ b/fs/btrfs/disk-io.h @@ -69,6 +69,9 @@ struct btrfs_root *btrfs_get_fs_root(struct btrfs_fs_info *fs_info, u64 objectid, bool check_ref); struct btrfs_root *btrfs_get_new_fs_root(struct btrfs_fs_info *fs_info, u64 objectid, dev_t anon_dev); +struct btrfs_root *btrfs_get_fs_root_commit_root(struct btrfs_fs_info *fs_info, + struct btrfs_path *path, + u64 objectid); void btrfs_free_fs_info(struct btrfs_fs_info *fs_info); int btrfs_cleanup_fs_roots(struct btrfs_fs_info *fs_info); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 3b21fee13e77..5fd60b13f4f8 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3185,7 +3185,7 @@ static int __btrfs_free_extent(struct btrfs_trans_handle *trans, struct btrfs_tree_block_info *bi; if (item_size < sizeof(*ei) + sizeof(*bi)) { btrfs_crit(info, -"invalid extent item size for key (%llu, %u, %llu) owner %llu, has %u expect >= %lu", +"invalid extent item size for key (%llu, %u, %llu) owner %llu, has %u expect >= %zu", key.objectid, key.type, key.offset, owner_objectid, item_size, sizeof(*ei) + sizeof(*bi)); diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 0ff659455b1e..87355a38a654 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -3628,7 +3628,8 @@ static ssize_t btrfs_file_read_iter(struct kiocb *iocb, struct iov_iter *to) inode_lock_shared(inode); ret = btrfs_direct_IO(iocb, to); inode_unlock_shared(inode); - if (ret < 0) + if (ret < 0 || !iov_iter_count(to) || + iocb->ki_pos >= i_size_read(file_inode(iocb->ki_filp))) return ret; } diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 936c3137c646..da58c58ef9aa 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -9672,10 +9672,16 @@ static int __btrfs_prealloc_file_range(struct inode *inode, int mode, * clear_offset by our extent size. */ clear_offset += ins.offset; - btrfs_dec_block_group_reservations(fs_info, ins.objectid); last_alloc = ins.offset; trans = insert_prealloc_file_extent(trans, inode, &ins, cur_offset); + /* + * Now that we inserted the prealloc extent we can finally + * decrement the number of reservations in the block group. + * If we did it before, we could race with relocation and have + * relocation miss the reserved extent, making it fail later. + */ + btrfs_dec_block_group_reservations(fs_info, ins.objectid); if (IS_ERR(trans)) { ret = PTR_ERR(trans); btrfs_free_reserved_extent(fs_info, ins.objectid, diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 580899bdb991..c54ea6586632 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -1026,6 +1026,10 @@ int btrfs_quota_enable(struct btrfs_fs_info *fs_info) btrfs_item_key_to_cpu(leaf, &found_key, slot); if (found_key.type == BTRFS_ROOT_REF_KEY) { + + /* Release locks on tree_root before we access quota_root */ + btrfs_release_path(path); + ret = add_qgroup_item(trans, quota_root, found_key.offset); if (ret) { @@ -1044,6 +1048,20 @@ int btrfs_quota_enable(struct btrfs_fs_info *fs_info) btrfs_abort_transaction(trans, ret); goto out_free_path; } + ret = btrfs_search_slot_for_read(tree_root, &found_key, + path, 1, 0); + if (ret < 0) { + btrfs_abort_transaction(trans, ret); + goto out_free_path; + } + if (ret > 0) { + /* + * Shouldn't happen, but in case it does we + * don't need to do the btrfs_next_item, just + * continue. + */ + continue; + } } ret = btrfs_next_item(tree_root, path); if (ret < 0) { diff --git a/fs/btrfs/reada.c b/fs/btrfs/reada.c index 9d4f5316a7e8..d9a166eb344e 100644 --- a/fs/btrfs/reada.c +++ b/fs/btrfs/reada.c @@ -421,6 +421,9 @@ static struct reada_extent *reada_find_extent(struct btrfs_fs_info *fs_info, if (!dev->bdev) continue; + if (test_bit(BTRFS_DEV_STATE_NO_READA, &dev->dev_state)) + continue; + if (dev_replace_is_ongoing && dev == fs_info->dev_replace.tgtdev) { /* @@ -445,6 +448,8 @@ static struct reada_extent *reada_find_extent(struct btrfs_fs_info *fs_info, } have_zone = 1; } + if (!have_zone) + radix_tree_delete(&fs_info->reada_tree, index); spin_unlock(&fs_info->reada_lock); up_read(&fs_info->dev_replace.rwsem); @@ -1020,3 +1025,45 @@ void btrfs_reada_detach(void *handle) kref_put(&rc->refcnt, reada_control_release); } + +/* + * Before removing a device (device replace or device remove ioctls), call this + * function to wait for all existing readahead requests on the device and to + * make sure no one queues more readahead requests for the device. + * + * Must be called without holding neither the device list mutex nor the device + * replace semaphore, otherwise it will deadlock. + */ +void btrfs_reada_remove_dev(struct btrfs_device *dev) +{ + struct btrfs_fs_info *fs_info = dev->fs_info; + + /* Serialize with readahead extent creation at reada_find_extent(). */ + spin_lock(&fs_info->reada_lock); + set_bit(BTRFS_DEV_STATE_NO_READA, &dev->dev_state); + spin_unlock(&fs_info->reada_lock); + + /* + * There might be readahead requests added to the radix trees which + * were not yet added to the readahead work queue. We need to start + * them and wait for their completion, otherwise we can end up with + * use-after-free problems when dropping the last reference on the + * readahead extents and their zones, as they need to access the + * device structure. + */ + reada_start_machine(fs_info); + btrfs_flush_workqueue(fs_info->readahead_workers); +} + +/* + * If when removing a device (device replace or device remove ioctls) an error + * happens after calling btrfs_reada_remove_dev(), call this to undo what that + * function did. This is safe to call even if btrfs_reada_remove_dev() was not + * called before. + */ +void btrfs_reada_undo_remove_dev(struct btrfs_device *dev) +{ + spin_lock(&dev->fs_info->reada_lock); + clear_bit(BTRFS_DEV_STATE_NO_READA, &dev->dev_state); + spin_unlock(&dev->fs_info->reada_lock); +} diff --git a/fs/btrfs/tree-checker.c b/fs/btrfs/tree-checker.c index f0ffd5ee77bd..8784b74f5232 100644 --- a/fs/btrfs/tree-checker.c +++ b/fs/btrfs/tree-checker.c @@ -760,18 +760,36 @@ int btrfs_check_chunk_valid(struct extent_buffer *leaf, u64 type; u64 features; bool mixed = false; + int raid_index; + int nparity; + int ncopies; length = btrfs_chunk_length(leaf, chunk); stripe_len = btrfs_chunk_stripe_len(leaf, chunk); num_stripes = btrfs_chunk_num_stripes(leaf, chunk); sub_stripes = btrfs_chunk_sub_stripes(leaf, chunk); type = btrfs_chunk_type(leaf, chunk); + raid_index = btrfs_bg_flags_to_raid_index(type); + ncopies = btrfs_raid_array[raid_index].ncopies; + nparity = btrfs_raid_array[raid_index].nparity; if (!num_stripes) { chunk_err(leaf, chunk, logical, "invalid chunk num_stripes, have %u", num_stripes); return -EUCLEAN; } + if (num_stripes < ncopies) { + chunk_err(leaf, chunk, logical, + "invalid chunk num_stripes < ncopies, have %u < %d", + num_stripes, ncopies); + return -EUCLEAN; + } + if (nparity && num_stripes == nparity) { + chunk_err(leaf, chunk, logical, + "invalid chunk num_stripes == nparity, have %u == %d", + num_stripes, nparity); + return -EUCLEAN; + } if (!IS_ALIGNED(logical, fs_info->sectorsize)) { chunk_err(leaf, chunk, logical, "invalid chunk logical, have %llu should aligned to %u", diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 58b9c419a2b6..b1e48078c318 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -431,7 +431,7 @@ static struct btrfs_device *__alloc_device(struct btrfs_fs_info *fs_info) atomic_set(&dev->reada_in_flight, 0); atomic_set(&dev->dev_stats_ccnt, 0); - btrfs_device_data_ordered_init(dev); + btrfs_device_data_ordered_init(dev, fs_info); INIT_RADIX_TREE(&dev->reada_zones, GFP_NOFS & ~__GFP_DIRECT_RECLAIM); INIT_RADIX_TREE(&dev->reada_extents, GFP_NOFS & ~__GFP_DIRECT_RECLAIM); extent_io_tree_init(fs_info, &dev->alloc_state, @@ -2099,6 +2099,8 @@ int btrfs_rm_device(struct btrfs_fs_info *fs_info, const char *device_path, mutex_unlock(&uuid_mutex); ret = btrfs_shrink_device(device, 0); + if (!ret) + btrfs_reada_remove_dev(device); mutex_lock(&uuid_mutex); if (ret) goto error_undo; @@ -2179,6 +2181,7 @@ out: return ret; error_undo: + btrfs_reada_undo_remove_dev(device); if (test_bit(BTRFS_DEV_STATE_WRITEABLE, &device->dev_state)) { mutex_lock(&fs_info->chunk_mutex); list_add(&device->dev_alloc_list, diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h index bf27ac07d315..232f02bd214f 100644 --- a/fs/btrfs/volumes.h +++ b/fs/btrfs/volumes.h @@ -39,10 +39,10 @@ struct btrfs_io_geometry { #if BITS_PER_LONG==32 && defined(CONFIG_SMP) #include <linux/seqlock.h> #define __BTRFS_NEED_DEVICE_DATA_ORDERED -#define btrfs_device_data_ordered_init(device) \ - seqcount_init(&device->data_seqcount) +#define btrfs_device_data_ordered_init(device, info) \ + seqcount_mutex_init(&device->data_seqcount, &info->chunk_mutex) #else -#define btrfs_device_data_ordered_init(device) do { } while (0) +#define btrfs_device_data_ordered_init(device, info) do { } while (0) #endif #define BTRFS_DEV_STATE_WRITEABLE (0) @@ -50,6 +50,7 @@ struct btrfs_io_geometry { #define BTRFS_DEV_STATE_MISSING (2) #define BTRFS_DEV_STATE_REPLACE_TGT (3) #define BTRFS_DEV_STATE_FLUSH_SENT (4) +#define BTRFS_DEV_STATE_NO_READA (5) struct btrfs_device { struct list_head dev_list; /* device_list_mutex */ @@ -71,7 +72,8 @@ struct btrfs_device { blk_status_t last_flush_error; #ifdef __BTRFS_NEED_DEVICE_DATA_ORDERED - seqcount_t data_seqcount; + /* A seqcount_t with associated chunk_mutex (for lockdep) */ + seqcount_mutex_t data_seqcount; #endif /* the internal btrfs device id */ @@ -162,11 +164,9 @@ btrfs_device_get_##name(const struct btrfs_device *dev) \ static inline void \ btrfs_device_set_##name(struct btrfs_device *dev, u64 size) \ { \ - preempt_disable(); \ write_seqcount_begin(&dev->data_seqcount); \ dev->name = size; \ write_seqcount_end(&dev->data_seqcount); \ - preempt_enable(); \ } #elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPTION) #define BTRFS_DEVICE_GETSET_FUNCS(name) \ diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c index 3080cda9e824..8bda092e60c5 100644 --- a/fs/cachefiles/rdwr.c +++ b/fs/cachefiles/rdwr.c @@ -121,7 +121,7 @@ static int cachefiles_read_reissue(struct cachefiles_object *object, _debug("reissue read"); ret = bmapping->a_ops->readpage(NULL, backpage); if (ret < 0) - goto unlock_discard; + goto discard; } /* but the page may have been read before the monitor was installed, so @@ -138,6 +138,7 @@ static int cachefiles_read_reissue(struct cachefiles_object *object, unlock_discard: unlock_page(backpage); +discard: spin_lock_irq(&object->work_lock); list_del(&monitor->op_link); spin_unlock_irq(&object->work_lock); diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index 5027bbdca419..ded4229c314a 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -4074,7 +4074,7 @@ void ceph_handle_caps(struct ceph_mds_session *session, vino.snap, inode); mutex_lock(&session->s_mutex); - session->s_seq++; + inc_session_sequence(session); dout(" mds%d seq %lld cap seq %u\n", session->s_mds, session->s_seq, (unsigned)seq); diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 08f1c0c31dc2..8f1d7500a7ec 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -4231,7 +4231,7 @@ static void handle_lease(struct ceph_mds_client *mdsc, dname.len, dname.name); mutex_lock(&session->s_mutex); - session->s_seq++; + inc_session_sequence(session); if (!inode) { dout("handle_lease no inode %llx\n", vino.ino); @@ -4385,29 +4385,49 @@ static void maybe_recover_session(struct ceph_mds_client *mdsc) bool check_session_state(struct ceph_mds_session *s) { - if (s->s_state == CEPH_MDS_SESSION_CLOSING) { - dout("resending session close request for mds%d\n", - s->s_mds); - request_close_session(s); - return false; - } - if (s->s_ttl && time_after(jiffies, s->s_ttl)) { - if (s->s_state == CEPH_MDS_SESSION_OPEN) { + switch (s->s_state) { + case CEPH_MDS_SESSION_OPEN: + if (s->s_ttl && time_after(jiffies, s->s_ttl)) { s->s_state = CEPH_MDS_SESSION_HUNG; pr_info("mds%d hung\n", s->s_mds); } - } - if (s->s_state == CEPH_MDS_SESSION_NEW || - s->s_state == CEPH_MDS_SESSION_RESTARTING || - s->s_state == CEPH_MDS_SESSION_CLOSED || - s->s_state == CEPH_MDS_SESSION_REJECTED) - /* this mds is failed or recovering, just wait */ + break; + case CEPH_MDS_SESSION_CLOSING: + /* Should never reach this when we're unmounting */ + WARN_ON_ONCE(true); + fallthrough; + case CEPH_MDS_SESSION_NEW: + case CEPH_MDS_SESSION_RESTARTING: + case CEPH_MDS_SESSION_CLOSED: + case CEPH_MDS_SESSION_REJECTED: return false; + } return true; } /* + * If the sequence is incremented while we're waiting on a REQUEST_CLOSE reply, + * then we need to retransmit that request. + */ +void inc_session_sequence(struct ceph_mds_session *s) +{ + lockdep_assert_held(&s->s_mutex); + + s->s_seq++; + + if (s->s_state == CEPH_MDS_SESSION_CLOSING) { + int ret; + + dout("resending session close request for mds%d\n", s->s_mds); + ret = request_close_session(s); + if (ret < 0) + pr_err("unable to close session to mds%d: %d\n", + s->s_mds, ret); + } +} + +/* * delayed work -- periodically trim expired leases, renew caps with mds */ static void schedule_delayed(struct ceph_mds_client *mdsc) diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h index cbf8af437140..f5adbebcb38e 100644 --- a/fs/ceph/mds_client.h +++ b/fs/ceph/mds_client.h @@ -480,6 +480,7 @@ struct ceph_mds_client { extern const char *ceph_mds_op_name(int op); extern bool check_session_state(struct ceph_mds_session *s); +void inc_session_sequence(struct ceph_mds_session *s); extern struct ceph_mds_session * __ceph_lookup_mds_session(struct ceph_mds_client *, int mds); diff --git a/fs/ceph/quota.c b/fs/ceph/quota.c index 83cb4f26b689..9b785f11e95a 100644 --- a/fs/ceph/quota.c +++ b/fs/ceph/quota.c @@ -53,7 +53,7 @@ void ceph_handle_quota(struct ceph_mds_client *mdsc, /* increment msg sequence number */ mutex_lock(&session->s_mutex); - session->s_seq++; + inc_session_sequence(session); mutex_unlock(&session->s_mutex); /* lookup inode */ diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c index 0da39c16dab4..b611f829cb61 100644 --- a/fs/ceph/snap.c +++ b/fs/ceph/snap.c @@ -873,7 +873,7 @@ void ceph_handle_snap(struct ceph_mds_client *mdsc, ceph_snap_op_name(op), split, trace_len); mutex_lock(&session->s_mutex); - session->s_seq++; + inc_session_sequence(session); mutex_unlock(&session->s_mutex); down_write(&mdsc->snap_rwsem); diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c index a768a09430c3..686e0ad28788 100644 --- a/fs/debugfs/file.c +++ b/fs/debugfs/file.c @@ -1127,24 +1127,23 @@ static const struct file_operations debugfs_devm_entry_ops = { * file will be created in the root of the debugfs filesystem. * @read_fn: function pointer called to print the seq_file content. */ -struct dentry *debugfs_create_devm_seqfile(struct device *dev, const char *name, - struct dentry *parent, - int (*read_fn)(struct seq_file *s, - void *data)) +void debugfs_create_devm_seqfile(struct device *dev, const char *name, + struct dentry *parent, + int (*read_fn)(struct seq_file *s, void *data)) { struct debugfs_devm_entry *entry; if (IS_ERR(parent)) - return ERR_PTR(-ENOENT); + return; entry = devm_kzalloc(dev, sizeof(*entry), GFP_KERNEL); if (!entry) - return ERR_PTR(-ENOMEM); + return; entry->read = read_fn; entry->dev = dev; - return debugfs_create_file(name, S_IRUGO, parent, entry, - &debugfs_devm_entry_ops); + debugfs_create_file(name, S_IRUGO, parent, entry, + &debugfs_devm_entry_ops); } EXPORT_SYMBOL_GPL(debugfs_create_devm_seqfile); diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c index 5b81f3b080ee..ca50c90adc4c 100644 --- a/fs/ext4/dir.c +++ b/fs/ext4/dir.c @@ -669,68 +669,8 @@ const struct file_operations ext4_dir_operations = { }; #ifdef CONFIG_UNICODE -static int ext4_d_compare(const struct dentry *dentry, unsigned int len, - const char *str, const struct qstr *name) -{ - struct qstr qstr = {.name = str, .len = len }; - const struct dentry *parent = READ_ONCE(dentry->d_parent); - const struct inode *inode = d_inode_rcu(parent); - char strbuf[DNAME_INLINE_LEN]; - - if (!inode || !IS_CASEFOLDED(inode) || - !EXT4_SB(inode->i_sb)->s_encoding) { - if (len != name->len) - return -1; - return memcmp(str, name->name, len); - } - - /* - * If the dentry name is stored in-line, then it may be concurrently - * modified by a rename. If this happens, the VFS will eventually retry - * the lookup, so it doesn't matter what ->d_compare() returns. - * However, it's unsafe to call utf8_strncasecmp() with an unstable - * string. Therefore, we have to copy the name into a temporary buffer. - */ - if (len <= DNAME_INLINE_LEN - 1) { - memcpy(strbuf, str, len); - strbuf[len] = 0; - qstr.name = strbuf; - /* prevent compiler from optimizing out the temporary buffer */ - barrier(); - } - - return ext4_ci_compare(inode, name, &qstr, false); -} - -static int ext4_d_hash(const struct dentry *dentry, struct qstr *str) -{ - const struct ext4_sb_info *sbi = EXT4_SB(dentry->d_sb); - const struct unicode_map *um = sbi->s_encoding; - const struct inode *inode = d_inode_rcu(dentry); - unsigned char *norm; - int len, ret = 0; - - if (!inode || !IS_CASEFOLDED(inode) || !um) - return 0; - - norm = kmalloc(PATH_MAX, GFP_ATOMIC); - if (!norm) - return -ENOMEM; - - len = utf8_casefold(um, str, norm, PATH_MAX); - if (len < 0) { - if (ext4_has_strict_mode(sbi)) - ret = -EINVAL; - goto out; - } - str->hash = full_name_hash(dentry, norm, len); -out: - kfree(norm); - return ret; -} - const struct dentry_operations ext4_dentry_ops = { - .d_hash = ext4_d_hash, - .d_compare = ext4_d_compare, + .d_hash = generic_ci_d_hash, + .d_compare = generic_ci_d_compare, }; #endif diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 254d1c26bea8..45fcdbf538d1 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1166,10 +1166,6 @@ struct ext4_inode_info { #define EXT4_VALID_FS 0x0001 /* Unmounted cleanly */ #define EXT4_ERROR_FS 0x0002 /* Errors detected */ #define EXT4_ORPHAN_FS 0x0004 /* Orphans being recovered */ -#define EXT4_FC_INELIGIBLE 0x0008 /* Fast commit ineligible */ -#define EXT4_FC_COMMITTING 0x0010 /* File system underoing a fast - * commit. - */ #define EXT4_FC_REPLAY 0x0020 /* Fast commit replay ongoing */ /* @@ -1431,6 +1427,10 @@ struct ext4_super_block { */ #define EXT4_MF_MNTDIR_SAMPLED 0x0001 #define EXT4_MF_FS_ABORTED 0x0002 /* Fatal error detected */ +#define EXT4_MF_FC_INELIGIBLE 0x0004 /* Fast commit ineligible */ +#define EXT4_MF_FC_COMMITTING 0x0008 /* File system underoing a fast + * commit. + */ #ifdef CONFIG_FS_ENCRYPTION #define DUMMY_ENCRYPTION_ENABLED(sbi) ((sbi)->s_dummy_enc_policy.policy != NULL) @@ -1444,14 +1444,6 @@ struct ext4_super_block { #define EXT4_ENC_UTF8_12_1 1 /* - * Flags for ext4_sb_info.s_encoding_flags. - */ -#define EXT4_ENC_STRICT_MODE_FL (1 << 0) - -#define ext4_has_strict_mode(sbi) \ - (sbi->s_encoding_flags & EXT4_ENC_STRICT_MODE_FL) - -/* * fourth extended-fs super-block data in memory */ struct ext4_sb_info { @@ -1500,10 +1492,6 @@ struct ext4_sb_info { struct kobject s_kobj; struct completion s_kobj_unregister; struct super_block *s_sb; -#ifdef CONFIG_UNICODE - struct unicode_map *s_encoding; - __u16 s_encoding_flags; -#endif /* Journaling */ struct journal_s *s_journal; diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 559100f3e23c..57cfa28919a9 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -1471,16 +1471,16 @@ static int ext4_ext_search_left(struct inode *inode, } /* - * search the closest allocated block to the right for *logical - * and returns it at @logical + it's physical address at @phys - * if *logical is the largest allocated block, the function - * returns 0 at @phys - * return value contains 0 (success) or error code + * Search the closest allocated block to the right for *logical + * and returns it at @logical + it's physical address at @phys. + * If not exists, return 0 and @phys is set to 0. We will return + * 1 which means we found an allocated block and ret_ex is valid. + * Or return a (< 0) error code. */ static int ext4_ext_search_right(struct inode *inode, struct ext4_ext_path *path, ext4_lblk_t *logical, ext4_fsblk_t *phys, - struct ext4_extent **ret_ex) + struct ext4_extent *ret_ex) { struct buffer_head *bh = NULL; struct ext4_extent_header *eh; @@ -1574,10 +1574,11 @@ got_index: found_extent: *logical = le32_to_cpu(ex->ee_block); *phys = ext4_ext_pblock(ex); - *ret_ex = ex; + if (ret_ex) + *ret_ex = *ex; if (bh) put_bh(bh); - return 0; + return 1; } /* @@ -2868,8 +2869,8 @@ again: */ lblk = ex_end + 1; err = ext4_ext_search_right(inode, path, &lblk, &pblk, - &ex); - if (err) + NULL); + if (err < 0) goto out; if (pblk) { partial.pclu = EXT4_B2C(sbi, pblk); @@ -4039,7 +4040,7 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode, struct ext4_map_blocks *map, int flags) { struct ext4_ext_path *path = NULL; - struct ext4_extent newex, *ex, *ex2; + struct ext4_extent newex, *ex, ex2; struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); ext4_fsblk_t newblock = 0, pblk; int err = 0, depth, ret; @@ -4175,15 +4176,14 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode, if (err) goto out; ar.lright = map->m_lblk; - ex2 = NULL; err = ext4_ext_search_right(inode, path, &ar.lright, &ar.pright, &ex2); - if (err) + if (err < 0) goto out; /* Check if the extent after searching to the right implies a * cluster we can use. */ - if ((sbi->s_cluster_ratio > 1) && ex2 && - get_implied_cluster_alloc(inode->i_sb, map, ex2, path)) { + if ((sbi->s_cluster_ratio > 1) && err && + get_implied_cluster_alloc(inode->i_sb, map, &ex2, path)) { ar.len = allocated = map->m_len; newblock = map->m_pblk; goto got_allocated_blocks; diff --git a/fs/ext4/fast_commit.c b/fs/ext4/fast_commit.c index 447c8d93f480..8d43058386c3 100644 --- a/fs/ext4/fast_commit.c +++ b/fs/ext4/fast_commit.c @@ -269,7 +269,7 @@ void ext4_fc_mark_ineligible(struct super_block *sb, int reason) (EXT4_SB(sb)->s_mount_state & EXT4_FC_REPLAY)) return; - sbi->s_mount_state |= EXT4_FC_INELIGIBLE; + sbi->s_mount_flags |= EXT4_MF_FC_INELIGIBLE; WARN_ON(reason >= EXT4_FC_REASON_MAX); sbi->s_fc_stats.fc_ineligible_reason_count[reason]++; } @@ -292,7 +292,7 @@ void ext4_fc_start_ineligible(struct super_block *sb, int reason) } /* - * Stop a fast commit ineligible update. We set EXT4_FC_INELIGIBLE flag here + * Stop a fast commit ineligible update. We set EXT4_MF_FC_INELIGIBLE flag here * to ensure that after stopping the ineligible update, at least one full * commit takes place. */ @@ -302,13 +302,13 @@ void ext4_fc_stop_ineligible(struct super_block *sb) (EXT4_SB(sb)->s_mount_state & EXT4_FC_REPLAY)) return; - EXT4_SB(sb)->s_mount_state |= EXT4_FC_INELIGIBLE; + EXT4_SB(sb)->s_mount_flags |= EXT4_MF_FC_INELIGIBLE; atomic_dec(&EXT4_SB(sb)->s_fc_ineligible_updates); } static inline int ext4_fc_is_ineligible(struct super_block *sb) { - return (EXT4_SB(sb)->s_mount_state & EXT4_FC_INELIGIBLE) || + return (EXT4_SB(sb)->s_mount_flags & EXT4_MF_FC_INELIGIBLE) || atomic_read(&EXT4_SB(sb)->s_fc_ineligible_updates); } @@ -358,7 +358,7 @@ static int ext4_fc_track_template( spin_lock(&sbi->s_fc_lock); if (list_empty(&EXT4_I(inode)->i_fc_list)) list_add_tail(&EXT4_I(inode)->i_fc_list, - (sbi->s_mount_state & EXT4_FC_COMMITTING) ? + (sbi->s_mount_flags & EXT4_MF_FC_COMMITTING) ? &sbi->s_fc_q[FC_Q_STAGING] : &sbi->s_fc_q[FC_Q_MAIN]); spin_unlock(&sbi->s_fc_lock); @@ -411,7 +411,7 @@ static int __track_dentry_update(struct inode *inode, void *arg, bool update) node->fcd_name.len = dentry->d_name.len; spin_lock(&sbi->s_fc_lock); - if (sbi->s_mount_state & EXT4_FC_COMMITTING) + if (sbi->s_mount_flags & EXT4_MF_FC_COMMITTING) list_add_tail(&node->fcd_list, &sbi->s_fc_dentry_q[FC_Q_STAGING]); else @@ -846,7 +846,7 @@ static int ext4_fc_submit_inode_data_all(journal_t *journal) int ret = 0; spin_lock(&sbi->s_fc_lock); - sbi->s_mount_state |= EXT4_FC_COMMITTING; + sbi->s_mount_flags |= EXT4_MF_FC_COMMITTING; list_for_each(pos, &sbi->s_fc_q[FC_Q_MAIN]) { ei = list_entry(pos, struct ext4_inode_info, i_fc_list); ext4_set_inode_state(&ei->vfs_inode, EXT4_STATE_FC_COMMITTING); @@ -964,7 +964,6 @@ static int ext4_fc_commit_dentry_updates(journal_t *journal, u32 *crc) fc_dentry->fcd_parent, fc_dentry->fcd_ino, fc_dentry->fcd_name.len, fc_dentry->fcd_name.name, crc)) { - spin_lock(&sbi->s_fc_lock); ret = -ENOSPC; goto lock_and_exit; } @@ -1191,8 +1190,8 @@ static void ext4_fc_cleanup(journal_t *journal, int full) list_splice_init(&sbi->s_fc_q[FC_Q_STAGING], &sbi->s_fc_q[FC_Q_STAGING]); - sbi->s_mount_state &= ~EXT4_FC_COMMITTING; - sbi->s_mount_state &= ~EXT4_FC_INELIGIBLE; + sbi->s_mount_flags &= ~EXT4_MF_FC_COMMITTING; + sbi->s_mount_flags &= ~EXT4_MF_FC_INELIGIBLE; if (full) sbi->s_fc_bytes = 0; @@ -1617,8 +1616,10 @@ static int ext4_fc_replay_add_range(struct super_block *sb, if (ret == 0) { /* Range is not mapped */ path = ext4_find_extent(inode, cur, NULL, 0); - if (!path) - continue; + if (IS_ERR(path)) { + iput(inode); + return 0; + } memset(&newex, 0, sizeof(newex)); newex.ee_block = cpu_to_le32(cur); ext4_ext_store_pblock( @@ -2078,6 +2079,8 @@ static int ext4_fc_replay(journal_t *journal, struct buffer_head *bh, void ext4_fc_init(struct super_block *sb, journal_t *journal) { + int num_fc_blocks; + /* * We set replay callback even if fast commit disabled because we may * could still have fast commit blocks that need to be replayed even if @@ -2087,7 +2090,15 @@ void ext4_fc_init(struct super_block *sb, journal_t *journal) if (!test_opt2(sb, JOURNAL_FAST_COMMIT)) return; journal->j_fc_cleanup_callback = ext4_fc_cleanup; - if (jbd2_fc_init(journal, EXT4_NUM_FC_BLKS)) { + if (!buffer_uptodate(journal->j_sb_buffer) + && ext4_read_bh_lock(journal->j_sb_buffer, REQ_META | REQ_PRIO, + true)) { + ext4_msg(sb, KERN_ERR, "I/O error on journal"); + return; + } + num_fc_blocks = be32_to_cpu(journal->j_superblock->s_num_fc_blks); + if (jbd2_fc_init(journal, num_fc_blocks ? num_fc_blocks : + EXT4_NUM_FC_BLKS)) { pr_warn("Error while enabling fast commits, turning off."); ext4_clear_feature_fast_commit(sb); } diff --git a/fs/ext4/hash.c b/fs/ext4/hash.c index 2924261226e0..a92eb79de0cc 100644 --- a/fs/ext4/hash.c +++ b/fs/ext4/hash.c @@ -275,7 +275,7 @@ int ext4fs_dirhash(const struct inode *dir, const char *name, int len, struct dx_hash_info *hinfo) { #ifdef CONFIG_UNICODE - const struct unicode_map *um = EXT4_SB(dir->i_sb)->s_encoding; + const struct unicode_map *um = dir->i_sb->s_encoding; int r, dlen; unsigned char *buff; struct qstr qstr = {.name = name, .len = len }; diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 03c2253005f0..b96a18679a27 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1918,7 +1918,7 @@ static int __ext4_journalled_writepage(struct page *page, } if (ret == 0) ret = err; - err = ext4_jbd2_inode_add_write(handle, inode, 0, len); + err = ext4_jbd2_inode_add_write(handle, inode, page_offset(page), len); if (ret == 0) ret = err; EXT4_I(inode)->i_datasync_tid = handle->h_transaction->t_tid; @@ -3307,10 +3307,12 @@ static bool ext4_inode_datasync_dirty(struct inode *inode) if (journal) { if (jbd2_transaction_committed(journal, - EXT4_I(inode)->i_datasync_tid)) - return true; - return atomic_read(&EXT4_SB(inode->i_sb)->s_fc_subtid) >= - EXT4_I(inode)->i_fc_committed_subtid; + EXT4_I(inode)->i_datasync_tid)) + return false; + if (test_opt2(inode->i_sb, JOURNAL_FAST_COMMIT)) + return atomic_read(&EXT4_SB(inode->i_sb)->s_fc_subtid) < + EXT4_I(inode)->i_fc_committed_subtid; + return true; } /* Any metadata buffers to write? */ @@ -6157,7 +6159,8 @@ retry_alloc: if (ext4_walk_page_buffers(handle, page_buffers(page), 0, len, NULL, write_end_fn)) goto out_error; - if (ext4_jbd2_inode_add_write(handle, inode, 0, len)) + if (ext4_jbd2_inode_add_write(handle, inode, + page_offset(page), len)) goto out_error; ext4_set_inode_state(inode, EXT4_STATE_JDATA); } else { diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index 5159830dacb8..f458d1d81d96 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -1285,8 +1285,8 @@ static void dx_insert_block(struct dx_frame *frame, u32 hash, ext4_lblk_t block) int ext4_ci_compare(const struct inode *parent, const struct qstr *name, const struct qstr *entry, bool quick) { - const struct ext4_sb_info *sbi = EXT4_SB(parent->i_sb); - const struct unicode_map *um = sbi->s_encoding; + const struct super_block *sb = parent->i_sb; + const struct unicode_map *um = sb->s_encoding; int ret; if (quick) @@ -1298,7 +1298,7 @@ int ext4_ci_compare(const struct inode *parent, const struct qstr *name, /* Handle invalid character sequence as either an error * or as an opaque byte sequence. */ - if (ext4_has_strict_mode(sbi)) + if (sb_has_strict_encoding(sb)) return -EINVAL; if (name->len != entry->len) @@ -1315,7 +1315,7 @@ void ext4_fname_setup_ci_filename(struct inode *dir, const struct qstr *iname, { int len; - if (!IS_CASEFOLDED(dir) || !EXT4_SB(dir->i_sb)->s_encoding) { + if (!IS_CASEFOLDED(dir) || !dir->i_sb->s_encoding) { cf_name->name = NULL; return; } @@ -1324,7 +1324,7 @@ void ext4_fname_setup_ci_filename(struct inode *dir, const struct qstr *iname, if (!cf_name->name) return; - len = utf8_casefold(EXT4_SB(dir->i_sb)->s_encoding, + len = utf8_casefold(dir->i_sb->s_encoding, iname, cf_name->name, EXT4_NAME_LEN); if (len <= 0) { @@ -1361,7 +1361,7 @@ static inline bool ext4_match(const struct inode *parent, #endif #ifdef CONFIG_UNICODE - if (EXT4_SB(parent->i_sb)->s_encoding && IS_CASEFOLDED(parent)) { + if (parent->i_sb->s_encoding && IS_CASEFOLDED(parent)) { if (fname->cf_name.name) { struct qstr cf = {.name = fname->cf_name.name, .len = fname->cf_name.len}; @@ -2180,9 +2180,6 @@ static int ext4_add_entry(handle_t *handle, struct dentry *dentry, struct buffer_head *bh = NULL; struct ext4_dir_entry_2 *de; struct super_block *sb; -#ifdef CONFIG_UNICODE - struct ext4_sb_info *sbi; -#endif struct ext4_filename fname; int retval; int dx_fallback=0; @@ -2199,9 +2196,8 @@ static int ext4_add_entry(handle_t *handle, struct dentry *dentry, return -EINVAL; #ifdef CONFIG_UNICODE - sbi = EXT4_SB(sb); - if (ext4_has_strict_mode(sbi) && IS_CASEFOLDED(dir) && - sbi->s_encoding && utf8_validate(sbi->s_encoding, &dentry->d_name)) + if (sb_has_strict_encoding(sb) && IS_CASEFOLDED(dir) && + sb->s_encoding && utf8_validate(sb->s_encoding, &dentry->d_name)) return -EINVAL; #endif diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 2fe141ff3c7e..ef4734b40e2a 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1288,7 +1288,7 @@ static void ext4_put_super(struct super_block *sb) fs_put_dax(sbi->s_daxdev); fscrypt_free_dummy_policy(&sbi->s_dummy_enc_policy); #ifdef CONFIG_UNICODE - utf8_unload(sbi->s_encoding); + utf8_unload(sb->s_encoding); #endif kfree(sbi); } @@ -4303,7 +4303,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) goto failed_mount; #ifdef CONFIG_UNICODE - if (ext4_has_feature_casefold(sb) && !sbi->s_encoding) { + if (ext4_has_feature_casefold(sb) && !sb->s_encoding) { const struct ext4_sb_encodings *encoding_info; struct unicode_map *encoding; __u16 encoding_flags; @@ -4334,8 +4334,8 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) "%s-%s with flags 0x%hx", encoding_info->name, encoding_info->version?:"\b", encoding_flags); - sbi->s_encoding = encoding; - sbi->s_encoding_flags = encoding_flags; + sb->s_encoding = encoding; + sb->s_encoding_flags = encoding_flags; } #endif @@ -4777,8 +4777,8 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) INIT_LIST_HEAD(&sbi->s_fc_dentry_q[FC_Q_MAIN]); INIT_LIST_HEAD(&sbi->s_fc_dentry_q[FC_Q_STAGING]); sbi->s_fc_bytes = 0; - sbi->s_mount_state &= ~EXT4_FC_INELIGIBLE; - sbi->s_mount_state &= ~EXT4_FC_COMMITTING; + sbi->s_mount_flags &= ~EXT4_MF_FC_INELIGIBLE; + sbi->s_mount_flags &= ~EXT4_MF_FC_COMMITTING; spin_lock_init(&sbi->s_fc_lock); memset(&sbi->s_fc_stats, 0, sizeof(sbi->s_fc_stats)); sbi->s_fc_replay_state.fc_regions = NULL; @@ -4975,7 +4975,7 @@ no_journal: } #ifdef CONFIG_UNICODE - if (sbi->s_encoding) + if (sb->s_encoding) sb->s_d_op = &ext4_dentry_ops; #endif @@ -5184,7 +5184,7 @@ failed_mount: crypto_free_shash(sbi->s_chksum_driver); #ifdef CONFIG_UNICODE - utf8_unload(sbi->s_encoding); + utf8_unload(sb->s_encoding); #endif #ifdef CONFIG_QUOTA diff --git a/fs/ext4/sysfs.c b/fs/ext4/sysfs.c index 5ff33d18996a..4e27fe6ed3ae 100644 --- a/fs/ext4/sysfs.c +++ b/fs/ext4/sysfs.c @@ -315,6 +315,7 @@ EXT4_ATTR_FEATURE(casefold); EXT4_ATTR_FEATURE(verity); #endif EXT4_ATTR_FEATURE(metadata_csum_seed); +EXT4_ATTR_FEATURE(fast_commit); static struct attribute *ext4_feat_attrs[] = { ATTR_LIST(lazy_itable_init), @@ -331,6 +332,7 @@ static struct attribute *ext4_feat_attrs[] = { ATTR_LIST(verity), #endif ATTR_LIST(metadata_csum_seed), + ATTR_LIST(fast_commit), NULL, }; ATTRIBUTE_GROUPS(ext4_feat); diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index 5441c17562c5..d98a2e5dab9f 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -1078,7 +1078,8 @@ int gfs2_glock_get(struct gfs2_sbd *sdp, u64 number, out_free: kfree(gl->gl_lksb.sb_lvbptr); kmem_cache_free(cachep, gl); - atomic_dec(&sdp->sd_glock_disposal); + if (atomic_dec_and_test(&sdp->sd_glock_disposal)) + wake_up(&sdp->sd_glock_wait); out: return ret; diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c index aa3f5236befb..6c1432d78dce 100644 --- a/fs/gfs2/glops.c +++ b/fs/gfs2/glops.c @@ -165,6 +165,31 @@ void gfs2_ail_flush(struct gfs2_glock *gl, bool fsync) } /** + * gfs2_rgrp_metasync - sync out the metadata of a resource group + * @gl: the glock protecting the resource group + * + */ + +static int gfs2_rgrp_metasync(struct gfs2_glock *gl) +{ + struct gfs2_sbd *sdp = gl->gl_name.ln_sbd; + struct address_space *metamapping = &sdp->sd_aspace; + struct gfs2_rgrpd *rgd = gfs2_glock2rgrp(gl); + const unsigned bsize = sdp->sd_sb.sb_bsize; + loff_t start = (rgd->rd_addr * bsize) & PAGE_MASK; + loff_t end = PAGE_ALIGN((rgd->rd_addr + rgd->rd_length) * bsize) - 1; + int error; + + filemap_fdatawrite_range(metamapping, start, end); + error = filemap_fdatawait_range(metamapping, start, end); + WARN_ON_ONCE(error && !gfs2_withdrawn(sdp)); + mapping_set_error(metamapping, error); + if (error) + gfs2_io_error(sdp); + return error; +} + +/** * rgrp_go_sync - sync out the metadata for this glock * @gl: the glock * @@ -176,11 +201,7 @@ void gfs2_ail_flush(struct gfs2_glock *gl, bool fsync) static int rgrp_go_sync(struct gfs2_glock *gl) { struct gfs2_sbd *sdp = gl->gl_name.ln_sbd; - struct address_space *mapping = &sdp->sd_aspace; struct gfs2_rgrpd *rgd = gfs2_glock2rgrp(gl); - const unsigned bsize = sdp->sd_sb.sb_bsize; - loff_t start = (rgd->rd_addr * bsize) & PAGE_MASK; - loff_t end = PAGE_ALIGN((rgd->rd_addr + rgd->rd_length) * bsize) - 1; int error; if (!test_and_clear_bit(GLF_DIRTY, &gl->gl_flags)) @@ -189,10 +210,7 @@ static int rgrp_go_sync(struct gfs2_glock *gl) gfs2_log_flush(sdp, gl, GFS2_LOG_HEAD_FLUSH_NORMAL | GFS2_LFC_RGRP_GO_SYNC); - filemap_fdatawrite_range(mapping, start, end); - error = filemap_fdatawait_range(mapping, start, end); - WARN_ON_ONCE(error && !gfs2_withdrawn(sdp)); - mapping_set_error(mapping, error); + error = gfs2_rgrp_metasync(gl); if (!error) error = gfs2_ail_empty_gl(gl); gfs2_free_clones(rgd); @@ -266,7 +284,24 @@ static void gfs2_clear_glop_pending(struct gfs2_inode *ip) } /** - * inode_go_sync - Sync the dirty data and/or metadata for an inode glock + * gfs2_inode_metasync - sync out the metadata of an inode + * @gl: the glock protecting the inode + * + */ +int gfs2_inode_metasync(struct gfs2_glock *gl) +{ + struct address_space *metamapping = gfs2_glock2aspace(gl); + int error; + + filemap_fdatawrite(metamapping); + error = filemap_fdatawait(metamapping); + if (error) + gfs2_io_error(gl->gl_name.ln_sbd); + return error; +} + +/** + * inode_go_sync - Sync the dirty metadata of an inode * @gl: the glock protecting the inode * */ @@ -297,8 +332,7 @@ static int inode_go_sync(struct gfs2_glock *gl) error = filemap_fdatawait(mapping); mapping_set_error(mapping, error); } - ret = filemap_fdatawait(metamapping); - mapping_set_error(metamapping, ret); + ret = gfs2_inode_metasync(gl); if (!error) error = ret; gfs2_ail_empty_gl(gl); diff --git a/fs/gfs2/glops.h b/fs/gfs2/glops.h index 2dd192e85618..695898afcaf1 100644 --- a/fs/gfs2/glops.h +++ b/fs/gfs2/glops.h @@ -22,6 +22,7 @@ extern const struct gfs2_glock_operations gfs2_quota_glops; extern const struct gfs2_glock_operations gfs2_journal_glops; extern const struct gfs2_glock_operations *gfs2_glops_list[]; +extern int gfs2_inode_metasync(struct gfs2_glock *gl); extern void gfs2_ail_flush(struct gfs2_glock *gl, bool fsync); #endif /* __GLOPS_DOT_H__ */ diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c index 6774865f5b5b..077ccb1b3ccc 100644 --- a/fs/gfs2/inode.c +++ b/fs/gfs2/inode.c @@ -180,7 +180,8 @@ struct inode *gfs2_inode_lookup(struct super_block *sb, unsigned int type, error = gfs2_glock_nq_init(io_gl, LM_ST_SHARED, GL_EXACT, &ip->i_iopen_gh); if (unlikely(error)) goto fail; - gfs2_cancel_delete_work(ip->i_iopen_gh.gh_gl); + if (blktype != GFS2_BLKST_UNLINKED) + gfs2_cancel_delete_work(ip->i_iopen_gh.gh_gl); glock_set_object(ip->i_iopen_gh.gh_gl, ip); gfs2_glock_put(io_gl); io_gl = NULL; diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c index ed69298dd824..3922b26264f5 100644 --- a/fs/gfs2/lops.c +++ b/fs/gfs2/lops.c @@ -22,6 +22,7 @@ #include "incore.h" #include "inode.h" #include "glock.h" +#include "glops.h" #include "log.h" #include "lops.h" #include "meta_io.h" @@ -817,41 +818,19 @@ static int buf_lo_scan_elements(struct gfs2_jdesc *jd, u32 start, return error; } -/** - * gfs2_meta_sync - Sync all buffers associated with a glock - * @gl: The glock - * - */ - -void gfs2_meta_sync(struct gfs2_glock *gl) -{ - struct address_space *mapping = gfs2_glock2aspace(gl); - struct gfs2_sbd *sdp = gl->gl_name.ln_sbd; - int error; - - if (mapping == NULL) - mapping = &sdp->sd_aspace; - - filemap_fdatawrite(mapping); - error = filemap_fdatawait(mapping); - - if (error) - gfs2_io_error(gl->gl_name.ln_sbd); -} - static void buf_lo_after_scan(struct gfs2_jdesc *jd, int error, int pass) { struct gfs2_inode *ip = GFS2_I(jd->jd_inode); struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode); if (error) { - gfs2_meta_sync(ip->i_gl); + gfs2_inode_metasync(ip->i_gl); return; } if (pass != 1) return; - gfs2_meta_sync(ip->i_gl); + gfs2_inode_metasync(ip->i_gl); fs_info(sdp, "jid=%u: Replayed %u of %u blocks\n", jd->jd_jid, jd->jd_replayed_blocks, jd->jd_found_blocks); @@ -1060,14 +1039,14 @@ static void databuf_lo_after_scan(struct gfs2_jdesc *jd, int error, int pass) struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode); if (error) { - gfs2_meta_sync(ip->i_gl); + gfs2_inode_metasync(ip->i_gl); return; } if (pass != 1) return; /* data sync? */ - gfs2_meta_sync(ip->i_gl); + gfs2_inode_metasync(ip->i_gl); fs_info(sdp, "jid=%u: Replayed %u of %u data blocks\n", jd->jd_jid, jd->jd_replayed_blocks, jd->jd_found_blocks); diff --git a/fs/gfs2/lops.h b/fs/gfs2/lops.h index 4a3d8aecdf82..fbdbb08dcec6 100644 --- a/fs/gfs2/lops.h +++ b/fs/gfs2/lops.h @@ -27,8 +27,6 @@ extern void gfs2_log_submit_bio(struct bio **biop, int opf); extern void gfs2_pin(struct gfs2_sbd *sdp, struct buffer_head *bh); extern int gfs2_find_jhead(struct gfs2_jdesc *jd, struct gfs2_log_header_host *head, bool keep_cache); -extern void gfs2_meta_sync(struct gfs2_glock *gl); - static inline unsigned int buf_limit(struct gfs2_sbd *sdp) { unsigned int limit; diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index 7a7e3c10a9a9..61fce59cb4d3 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -633,8 +633,10 @@ static int init_statfs(struct gfs2_sbd *sdp) if (IS_ERR(sdp->sd_statfs_inode)) { error = PTR_ERR(sdp->sd_statfs_inode); fs_err(sdp, "can't read in statfs inode: %d\n", error); - goto fail; + goto out; } + if (sdp->sd_args.ar_spectator) + goto out; pn = gfs2_lookup_simple(master, "per_node"); if (IS_ERR(pn)) { @@ -682,15 +684,17 @@ free_local: iput(pn); put_statfs: iput(sdp->sd_statfs_inode); -fail: +out: return error; } /* Uninitialize and free up memory used by the list of statfs inodes */ static void uninit_statfs(struct gfs2_sbd *sdp) { - gfs2_glock_dq_uninit(&sdp->sd_sc_gh); - free_local_statfs_inodes(sdp); + if (!sdp->sd_args.ar_spectator) { + gfs2_glock_dq_uninit(&sdp->sd_sc_gh); + free_local_statfs_inodes(sdp); + } iput(sdp->sd_statfs_inode); } @@ -704,7 +708,7 @@ static int init_journal(struct gfs2_sbd *sdp, int undo) if (undo) { jindex = 0; - goto fail_jinode_gh; + goto fail_statfs; } sdp->sd_jindex = gfs2_lookup_simple(master, "jindex"); diff --git a/fs/gfs2/recovery.c b/fs/gfs2/recovery.c index b5cbe21efdfb..c26c68ebd29d 100644 --- a/fs/gfs2/recovery.c +++ b/fs/gfs2/recovery.c @@ -349,7 +349,7 @@ static int update_statfs_inode(struct gfs2_jdesc *jd, mark_buffer_dirty(bh); brelse(bh); - gfs2_meta_sync(ip->i_gl); + gfs2_inode_metasync(ip->i_gl); out: return error; diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index ee491bb9c1cc..92d799a193b8 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -719,9 +719,9 @@ void gfs2_clear_rgrpd(struct gfs2_sbd *sdp) } gfs2_free_clones(rgd); + return_all_reservations(rgd); kfree(rgd->rd_bits); rgd->rd_bits = NULL; - return_all_reservations(rgd); kmem_cache_free(gfs2_rgrpd_cachep, rgd); } } @@ -1370,6 +1370,9 @@ int gfs2_fitrim(struct file *filp, void __user *argp) if (!capable(CAP_SYS_ADMIN)) return -EPERM; + if (!test_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags)) + return -EROFS; + if (!blk_queue_discard(q)) return -EOPNOTSUPP; diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c index b285192bd6b3..b3d951ab8068 100644 --- a/fs/gfs2/super.c +++ b/fs/gfs2/super.c @@ -738,6 +738,7 @@ restart: gfs2_jindex_free(sdp); /* Take apart glock structures and buffer lists */ gfs2_gl_hash_clear(sdp); + truncate_inode_pages_final(&sdp->sd_aspace); gfs2_delete_debugfs_file(sdp); /* Unmount the locking protocol */ gfs2_lm_unmount(sdp); diff --git a/fs/hfs/btree.h b/fs/hfs/btree.h index dcc2aab1b2c4..4ba45caf5939 100644 --- a/fs/hfs/btree.h +++ b/fs/hfs/btree.h @@ -60,7 +60,7 @@ struct hfs_bnode { wait_queue_head_t lock_wq; atomic_t refcnt; unsigned int page_offset; - struct page *page[0]; + struct page *page[]; }; #define HFS_BNODE_ERROR 0 diff --git a/fs/hfsplus/hfsplus_fs.h b/fs/hfsplus/hfsplus_fs.h index 3b03fff68543..a92de5199ec3 100644 --- a/fs/hfsplus/hfsplus_fs.h +++ b/fs/hfsplus/hfsplus_fs.h @@ -117,7 +117,7 @@ struct hfs_bnode { wait_queue_head_t lock_wq; atomic_t refcnt; unsigned int page_offset; - struct page *page[0]; + struct page *page[]; }; #define HFS_BNODE_LOCK 0 diff --git a/fs/io_uring.c b/fs/io_uring.c index b42dfa0243bf..a7429c977eb3 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -1365,6 +1365,9 @@ static void io_prep_async_work(struct io_kiocb *req) io_req_init_async(req); id = req->work.identity; + if (req->flags & REQ_F_FORCE_ASYNC) + req->work.flags |= IO_WQ_WORK_CONCURRENT; + if (req->flags & REQ_F_ISREG) { if (def->hash_reg_file || (ctx->flags & IORING_SETUP_IOPOLL)) io_wq_hash_work(&req->work, file_inode(req->file)); @@ -1846,59 +1849,39 @@ static void __io_free_req(struct io_kiocb *req) percpu_ref_put(&ctx->refs); } -static bool io_link_cancel_timeout(struct io_kiocb *req) +static void io_kill_linked_timeout(struct io_kiocb *req) { - struct io_timeout_data *io = req->async_data; struct io_ring_ctx *ctx = req->ctx; - int ret; - - ret = hrtimer_try_to_cancel(&io->timer); - if (ret != -1) { - io_cqring_fill_event(req, -ECANCELED); - io_commit_cqring(ctx); - req->flags &= ~REQ_F_LINK_HEAD; - io_put_req_deferred(req, 1); - return true; - } - - return false; -} - -static bool __io_kill_linked_timeout(struct io_kiocb *req) -{ struct io_kiocb *link; - bool wake_ev; + bool cancelled = false; + unsigned long flags; - if (list_empty(&req->link_list)) - return false; - link = list_first_entry(&req->link_list, struct io_kiocb, link_list); - if (link->opcode != IORING_OP_LINK_TIMEOUT) - return false; + spin_lock_irqsave(&ctx->completion_lock, flags); + link = list_first_entry_or_null(&req->link_list, struct io_kiocb, + link_list); /* * Can happen if a linked timeout fired and link had been like * req -> link t-out -> link t-out [-> ...] */ - if (!(link->flags & REQ_F_LTIMEOUT_ACTIVE)) - return false; + if (link && (link->flags & REQ_F_LTIMEOUT_ACTIVE)) { + struct io_timeout_data *io = link->async_data; + int ret; - list_del_init(&link->link_list); - wake_ev = io_link_cancel_timeout(link); + list_del_init(&link->link_list); + ret = hrtimer_try_to_cancel(&io->timer); + if (ret != -1) { + io_cqring_fill_event(link, -ECANCELED); + io_commit_cqring(ctx); + cancelled = true; + } + } req->flags &= ~REQ_F_LINK_TIMEOUT; - return wake_ev; -} - -static void io_kill_linked_timeout(struct io_kiocb *req) -{ - struct io_ring_ctx *ctx = req->ctx; - unsigned long flags; - bool wake_ev; - - spin_lock_irqsave(&ctx->completion_lock, flags); - wake_ev = __io_kill_linked_timeout(req); spin_unlock_irqrestore(&ctx->completion_lock, flags); - if (wake_ev) + if (cancelled) { io_cqring_ev_posted(ctx); + io_put_req(link); + } } static struct io_kiocb *io_req_link_next(struct io_kiocb *req) @@ -4977,8 +4960,10 @@ static int io_poll_double_wake(struct wait_queue_entry *wait, unsigned mode, /* make sure double remove sees this as being gone */ wait->private = NULL; spin_unlock(&poll->head->lock); - if (!done) - __io_async_wake(req, poll, mask, io_poll_task_func); + if (!done) { + /* use wait func handler, so it matches the rq type */ + poll->wait.func(&poll->wait, mode, sync, key); + } } refcount_dec(&req->refs); return 1; @@ -6180,7 +6165,6 @@ static struct io_kiocb *io_prep_linked_timeout(struct io_kiocb *req) static void __io_queue_sqe(struct io_kiocb *req, struct io_comp_state *cs) { struct io_kiocb *linked_timeout; - struct io_kiocb *nxt; const struct cred *old_creds = NULL; int ret; @@ -6206,7 +6190,6 @@ again: */ if (ret == -EAGAIN && !(req->flags & REQ_F_NOWAIT)) { if (!io_arm_poll_handler(req)) { -punt: /* * Queued up for async execution, worker will release * submit reference when the iocb is actually submitted. @@ -6216,33 +6199,25 @@ punt: if (linked_timeout) io_queue_linked_timeout(linked_timeout); - goto exit; - } + } else if (likely(!ret)) { + /* drop submission reference */ + req = io_put_req_find_next(req); + if (linked_timeout) + io_queue_linked_timeout(linked_timeout); - if (unlikely(ret)) { + if (req) { + if (!(req->flags & REQ_F_FORCE_ASYNC)) + goto again; + io_queue_async_work(req); + } + } else { /* un-prep timeout, so it'll be killed as any other linked */ req->flags &= ~REQ_F_LINK_TIMEOUT; req_set_fail_links(req); io_put_req(req); io_req_complete(req, ret); - goto exit; } - /* drop submission reference */ - nxt = io_put_req_find_next(req); - if (linked_timeout) - io_queue_linked_timeout(linked_timeout); - - if (nxt) { - req = nxt; - - if (req->flags & REQ_F_FORCE_ASYNC) { - linked_timeout = NULL; - goto punt; - } - goto again; - } -exit: if (old_creds) revert_creds(old_creds); } @@ -6266,13 +6241,6 @@ fail_req: if (unlikely(ret)) goto fail_req; } - - /* - * Never try inline submit of IOSQE_ASYNC is set, go straight - * to async execution. - */ - io_req_init_async(req); - req->work.flags |= IO_WQ_WORK_CONCURRENT; io_queue_async_work(req); } else { if (sqe) { diff --git a/fs/isofs/rock.h b/fs/isofs/rock.h index 1558cf22ef8a..ee9660e9671c 100644 --- a/fs/isofs/rock.h +++ b/fs/isofs/rock.h @@ -22,7 +22,7 @@ struct SU_ER_s { __u8 len_des; __u8 len_src; __u8 ext_ver; - __u8 data[0]; + __u8 data[]; } __attribute__ ((packed)); struct RR_RR_s { @@ -44,7 +44,7 @@ struct RR_PN_s { struct SL_component { __u8 flags; __u8 len; - __u8 text[0]; + __u8 text[]; } __attribute__ ((packed)); struct RR_SL_s { @@ -54,7 +54,7 @@ struct RR_SL_s { struct RR_NM_s { __u8 flags; - char name[0]; + char name[]; } __attribute__ ((packed)); struct RR_CL_s { @@ -71,7 +71,7 @@ struct stamp { struct RR_TF_s { __u8 flags; - struct stamp times[0]; /* Variable number of these beasts */ + struct stamp times[]; /* Variable number of these beasts */ } __attribute__ ((packed)); /* Linux-specific extension for transparent decompression */ diff --git a/fs/proc/base.c b/fs/proc/base.c index 0f707003dda5..b362523a9829 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -1049,6 +1049,8 @@ static ssize_t oom_adj_read(struct file *file, char __user *buf, size_t count, oom_adj = (task->signal->oom_score_adj * -OOM_DISABLE) / OOM_SCORE_ADJ_MAX; put_task_struct(task); + if (oom_adj > OOM_ADJUST_MAX) + oom_adj = OOM_ADJUST_MAX; len = snprintf(buffer, sizeof(buffer), "%d\n", oom_adj); return simple_read_from_buffer(buf, count, ppos, buffer, len); } diff --git a/fs/select.c b/fs/select.c index 7aef49552d4c..ebfebdfe5c69 100644 --- a/fs/select.c +++ b/fs/select.c @@ -97,7 +97,7 @@ u64 select_estimate_accuracy(struct timespec64 *tv) struct poll_table_page { struct poll_table_page * next; struct poll_table_entry * entry; - struct poll_table_entry entries[0]; + struct poll_table_entry entries[]; }; #define POLL_TABLE_FULL(table) \ @@ -836,7 +836,7 @@ SYSCALL_DEFINE1(old_select, struct sel_arg_struct __user *, arg) struct poll_list { struct poll_list *next; int len; - struct pollfd entries[0]; + struct pollfd entries[]; }; #define POLLFD_PER_PAGE ((PAGE_SIZE-sizeof(struct poll_list)) / sizeof(struct pollfd)) diff --git a/include/asm-generic/uaccess.h b/include/asm-generic/uaccess.h index 45f9872fd747..4973328f3c6e 100644 --- a/include/asm-generic/uaccess.h +++ b/include/asm-generic/uaccess.h @@ -12,7 +12,8 @@ #ifdef CONFIG_UACCESS_MEMCPY #include <asm/unaligned.h> -static inline int __get_user_fn(size_t size, const void __user *from, void *to) +static __always_inline int +__get_user_fn(size_t size, const void __user *from, void *to) { BUILD_BUG_ON(!__builtin_constant_p(size)); @@ -37,7 +38,8 @@ static inline int __get_user_fn(size_t size, const void __user *from, void *to) } #define __get_user_fn(sz, u, k) __get_user_fn(sz, u, k) -static inline int __put_user_fn(size_t size, void __user *to, void *from) +static __always_inline int +__put_user_fn(size_t size, void __user *to, void *from) { BUILD_BUG_ON(!__builtin_constant_p(size)); diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index cd14444bf600..b2b3d81b1535 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -701,6 +701,7 @@ #ifdef CONFIG_CONSTRUCTORS #define KERNEL_CTORS() . = ALIGN(8); \ __ctors_start = .; \ + KEEP(*(SORT(.ctors.*))) \ KEEP(*(.ctors)) \ KEEP(*(SORT(.init_array.*))) \ KEEP(*(.init_array)) \ diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index da53aebb7230..a53243abd945 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -1836,7 +1836,7 @@ static inline void drm_dp_cec_unset_edid(struct drm_dp_aux *aux) * @link_rate: Requested Link rate from DPCD 0x219 * @num_lanes: Number of lanes requested by sing through DPCD 0x220 * @phy_pattern: DP Phy test pattern from DPCD 0x248 - * @hb2_reset: DP HBR2_COMPLIANCE_SCRAMBLER_RESET from DCPD 0x24A and 0x24B + * @hbr2_reset: DP HBR2_COMPLIANCE_SCRAMBLER_RESET from DCPD 0x24A and 0x24B * @custom80: DP Test_80BIT_CUSTOM_PATTERN from DPCDs 0x250 through 0x259 * @enhanced_frame_cap: flag for enhanced frame capability. */ diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h index b27a0e2169c8..e97daf6ffbb1 100644 --- a/include/drm/drm_edid.h +++ b/include/drm/drm_edid.h @@ -359,13 +359,6 @@ drm_load_edid_firmware(struct drm_connector *connector) } #endif -/** - * drm_edid_are_equal - compare two edid blobs. - * @edid1: pointer to first blob - * @edid2: pointer to second blob - * This helper can be used during probing to determine if - * edid had changed. - */ bool drm_edid_are_equal(const struct edid *edid1, const struct edid *edid2); int diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h index 1c9417430d08..f32d179e139d 100644 --- a/include/drm/drm_print.h +++ b/include/drm/drm_print.h @@ -338,7 +338,7 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category, const char *format, ...); /** - * Error output. + * DRM_DEV_ERROR() - Error output. * * @dev: device pointer * @fmt: printf() like format string. @@ -347,10 +347,12 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category, drm_dev_printk(dev, KERN_ERR, "*ERROR* " fmt, ##__VA_ARGS__) /** - * Rate limited error output. Like DRM_ERROR() but won't flood the log. + * DRM_DEV_ERROR_RATELIMITED() - Rate limited error output. * * @dev: device pointer * @fmt: printf() like format string. + * + * Like DRM_ERROR() but won't flood the log. */ #define DRM_DEV_ERROR_RATELIMITED(dev, fmt, ...) \ ({ \ @@ -375,15 +377,27 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category, }) /** - * Debug output. + * DRM_DEV_DEBUG() - Debug output for generic drm code * * @dev: device pointer * @fmt: printf() like format string. */ #define DRM_DEV_DEBUG(dev, fmt, ...) \ drm_dev_dbg(dev, DRM_UT_CORE, fmt, ##__VA_ARGS__) +/** + * DRM_DEV_DEBUG_DRIVER() - Debug output for vendor specific part of the driver + * + * @dev: device pointer + * @fmt: printf() like format string. + */ #define DRM_DEV_DEBUG_DRIVER(dev, fmt, ...) \ drm_dev_dbg(dev, DRM_UT_DRIVER, fmt, ##__VA_ARGS__) +/** + * DRM_DEV_DEBUG_KMS() - Debug output for modesetting code + * + * @dev: device pointer + * @fmt: printf() like format string. + */ #define DRM_DEV_DEBUG_KMS(dev, fmt, ...) \ drm_dev_dbg(dev, DRM_UT_KMS, fmt, ##__VA_ARGS__) diff --git a/include/kunit/test.h b/include/kunit/test.h index 9197da792336..db1b0ae666c4 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -252,13 +252,14 @@ static inline int kunit_run_all_tests(void) } #endif /* IS_BUILTIN(CONFIG_KUNIT) */ +#ifdef MODULE /** - * kunit_test_suites() - used to register one or more &struct kunit_suite - * with KUnit. + * kunit_test_suites_for_module() - used to register one or more + * &struct kunit_suite with KUnit. * - * @suites_list...: a statically allocated list of &struct kunit_suite. + * @__suites: a statically allocated list of &struct kunit_suite. * - * Registers @suites_list with the test framework. See &struct kunit_suite for + * Registers @__suites with the test framework. See &struct kunit_suite for * more information. * * If a test suite is built-in, module_init() gets translated into @@ -267,7 +268,6 @@ static inline int kunit_run_all_tests(void) * module_{init|exit} functions for the builtin case when registering * suites via kunit_test_suites() below. */ -#ifdef MODULE #define kunit_test_suites_for_module(__suites) \ static int __init kunit_test_suites_init(void) \ { \ @@ -294,7 +294,7 @@ static inline int kunit_run_all_tests(void) * kunit_test_suites() - used to register one or more &struct kunit_suite * with KUnit. * - * @suites: a statically allocated list of &struct kunit_suite. + * @__suites: a statically allocated list of &struct kunit_suite. * * Registers @suites with the test framework. See &struct kunit_suite for * more information. @@ -308,10 +308,10 @@ static inline int kunit_run_all_tests(void) * module. * */ -#define kunit_test_suites(...) \ +#define kunit_test_suites(__suites...) \ __kunit_test_suites(__UNIQUE_ID(array), \ __UNIQUE_ID(suites), \ - __VA_ARGS__) + ##__suites) #define kunit_test_suite(suite) kunit_test_suites(&suite) diff --git a/include/linux/arm-smccc.h b/include/linux/arm-smccc.h index 885c9ffc835c..f860645f6512 100644 --- a/include/linux/arm-smccc.h +++ b/include/linux/arm-smccc.h @@ -87,6 +87,8 @@ ARM_SMCCC_SMC_32, \ 0, 0x7fff) +#define SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED 1 + /* Paravirtualised time calls (defined by ARM DEN0057A) */ #define ARM_SMCCC_HV_PV_TIME_FEATURES \ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, \ diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h index b23eeca4d677..794b2a33a2c3 100644 --- a/include/linux/blk-mq.h +++ b/include/linux/blk-mq.h @@ -235,6 +235,8 @@ enum hctx_type { * @flags: Zero or more BLK_MQ_F_* flags. * @driver_data: Pointer to data owned by the block driver that created this * tag set. + * @active_queues_shared_sbitmap: + * number of active request queues per tag set. * @__bitmap_tags: A shared tags sbitmap, used over all hctx's * @__breserved_tags: * A shared reserved tags sbitmap, used over all hctx's diff --git a/include/linux/can/skb.h b/include/linux/can/skb.h index 900b9f4e0605..fc61cf4eff1c 100644 --- a/include/linux/can/skb.h +++ b/include/linux/can/skb.h @@ -61,21 +61,17 @@ static inline void can_skb_set_owner(struct sk_buff *skb, struct sock *sk) */ static inline struct sk_buff *can_create_echo_skb(struct sk_buff *skb) { - if (skb_shared(skb)) { - struct sk_buff *nskb = skb_clone(skb, GFP_ATOMIC); + struct sk_buff *nskb; - if (likely(nskb)) { - can_skb_set_owner(nskb, skb->sk); - consume_skb(skb); - return nskb; - } else { - kfree_skb(skb); - return NULL; - } + nskb = skb_clone(skb, GFP_ATOMIC); + if (unlikely(!nskb)) { + kfree_skb(skb); + return NULL; } - /* we can assume to have an unshared skb with proper owner */ - return skb; + can_skb_set_owner(nskb, skb->sk); + consume_skb(skb); + return nskb; } #endif /* !_CAN_SKB_H */ diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index fa37b1c66443..1eaa04f1bae6 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -298,7 +298,7 @@ __ATTR(_name, 0644, show_##_name, store_##_name) struct cpufreq_driver { char name[CPUFREQ_NAME_LEN]; - u8 flags; + u16 flags; void *driver_data; /* needed by all drivers */ @@ -422,9 +422,18 @@ struct cpufreq_driver { */ #define CPUFREQ_IS_COOLING_DEV BIT(7) +/* + * Set by drivers that need to update internale upper and lower boundaries along + * with the target frequency and so the core and governors should also invoke + * the diver if the target frequency does not change, but the policy min or max + * may have changed. + */ +#define CPUFREQ_NEED_UPDATE_LIMITS BIT(8) + int cpufreq_register_driver(struct cpufreq_driver *driver_data); int cpufreq_unregister_driver(struct cpufreq_driver *driver_data); +bool cpufreq_driver_test_flags(u16 flags); const char *cpufreq_get_current_driver(void); void *cpufreq_get_driver_data(void); diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h index 851dd1f9a8a5..d6c4cc9ecc77 100644 --- a/include/linux/debugfs.h +++ b/include/linux/debugfs.h @@ -144,10 +144,9 @@ void debugfs_create_u32_array(const char *name, umode_t mode, struct dentry *parent, struct debugfs_u32_array *array); -struct dentry *debugfs_create_devm_seqfile(struct device *dev, const char *name, - struct dentry *parent, - int (*read_fn)(struct seq_file *s, - void *data)); +void debugfs_create_devm_seqfile(struct device *dev, const char *name, + struct dentry *parent, + int (*read_fn)(struct seq_file *s, void *data)); bool debugfs_initialized(void); @@ -327,13 +326,12 @@ static inline void debugfs_create_u32_array(const char *name, umode_t mode, { } -static inline struct dentry *debugfs_create_devm_seqfile(struct device *dev, - const char *name, - struct dentry *parent, - int (*read_fn)(struct seq_file *s, - void *data)) +static inline void debugfs_create_devm_seqfile(struct device *dev, + const char *name, + struct dentry *parent, + int (*read_fn)(struct seq_file *s, + void *data)) { - return ERR_PTR(-ENODEV); } static inline ssize_t debugfs_read_file_bool(struct file *file, diff --git a/include/linux/dma/ti-cppi5.h b/include/linux/dma/ti-cppi5.h index 5896441ee604..efa2f0309f00 100644 --- a/include/linux/dma/ti-cppi5.h +++ b/include/linux/dma/ti-cppi5.h @@ -47,7 +47,7 @@ struct cppi5_host_desc_t { u32 buf_info1; u32 org_buf_len; u64 org_buf_ptr; - u32 epib[0]; + u32 epib[]; } __packed; #define CPPI5_DESC_MIN_ALIGN (16U) @@ -139,7 +139,7 @@ struct cppi5_desc_epib_t { */ struct cppi5_monolithic_desc_t { struct cppi5_desc_hdr_t hdr; - u32 epib[0]; + u32 epib[]; }; #define CPPI5_INFO2_MDESC_DATA_OFFSET_SHIFT (18U) diff --git a/include/linux/fs.h b/include/linux/fs.h index 0bd126418bb6..21cc971fd960 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -3285,7 +3285,7 @@ static inline ino_t parent_ino(struct dentry *dentry) */ struct simple_transaction_argresp { ssize_t size; - char data[0]; + char data[]; }; #define SIMPLE_TRANSACTION_LIMIT (PAGE_SIZE - sizeof(struct simple_transaction_argresp)) diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index fb3d71ad6eea..1d5566af48ac 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -263,7 +263,10 @@ typedef struct journal_superblock_s /* 0x0050 */ __u8 s_checksum_type; /* checksum type */ __u8 s_padding2[3]; - __u32 s_padding[42]; +/* 0x0054 */ + __be32 s_num_fc_blks; /* Number of fast commit blocks */ +/* 0x0058 */ + __u32 s_padding[41]; __be32 s_checksum; /* crc32c(superblock) */ /* 0x0100 */ @@ -1253,7 +1256,7 @@ struct journal_s */ void (*j_fc_cleanup_callback)(struct journal_s *journal, int); - /* + /** * @j_fc_replay_callback: * * File-system specific function that performs replay of a fast diff --git a/include/linux/jhash.h b/include/linux/jhash.h index cfb62e9f37be..ab7f8c152b89 100644 --- a/include/linux/jhash.h +++ b/include/linux/jhash.h @@ -99,6 +99,7 @@ static inline u32 jhash(const void *key, u32 length, u32 initval) case 2: a += (u32)k[1]<<8; fallthrough; case 1: a += k[0]; __jhash_final(a, b, c); + break; case 0: /* Nothing left to add */ break; } @@ -136,6 +137,7 @@ static inline u32 jhash2(const u32 *k, u32 length, u32 initval) case 2: b += k[1]; fallthrough; case 1: a += k[0]; __jhash_final(a, b, c); + break; case 0: /* Nothing left to add */ break; } diff --git a/include/linux/mailbox/zynqmp-ipi-message.h b/include/linux/mailbox/zynqmp-ipi-message.h index 9542b41eacfd..35ce84c8ca02 100644 --- a/include/linux/mailbox/zynqmp-ipi-message.h +++ b/include/linux/mailbox/zynqmp-ipi-message.h @@ -14,7 +14,7 @@ */ struct zynqmp_ipi_message { size_t len; - u8 data[0]; + u8 data[]; }; #endif /* _LINUX_ZYNQMP_IPI_MESSAGE_H_ */ diff --git a/include/linux/mic_bus.h b/include/linux/mic_bus.h deleted file mode 100644 index e99c789424e0..000000000000 --- a/include/linux/mic_bus.h +++ /dev/null @@ -1,100 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel MIC Bus driver. - * - * This implementation is very similar to the virtio bus driver - * implementation @ include/linux/virtio.h. - */ -#ifndef _MIC_BUS_H_ -#define _MIC_BUS_H_ -/* - * Everything a mbus driver needs to work with any particular mbus - * implementation. - */ -#include <linux/interrupt.h> -#include <linux/dma-mapping.h> - -struct mbus_device_id { - __u32 device; - __u32 vendor; -}; - -#define MBUS_DEV_DMA_HOST 2 -#define MBUS_DEV_DMA_MIC 3 -#define MBUS_DEV_ANY_ID 0xffffffff - -/** - * mbus_device - representation of a device using mbus - * @mmio_va: virtual address of mmio space - * @hw_ops: the hardware ops supported by this device. - * @id: the device type identification (used to match it with a driver). - * @dev: underlying device. - * be used to communicate with. - * @index: unique position on the mbus bus - */ -struct mbus_device { - void __iomem *mmio_va; - struct mbus_hw_ops *hw_ops; - struct mbus_device_id id; - struct device dev; - int index; -}; - -/** - * mbus_driver - operations for a mbus I/O driver - * @driver: underlying device driver (populate name and owner). - * @id_table: the ids serviced by this driver. - * @probe: the function to call when a device is found. Returns 0 or -errno. - * @remove: the function to call when a device is removed. - */ -struct mbus_driver { - struct device_driver driver; - const struct mbus_device_id *id_table; - int (*probe)(struct mbus_device *dev); - void (*scan)(struct mbus_device *dev); - void (*remove)(struct mbus_device *dev); -}; - -/** - * struct mic_irq - opaque pointer used as cookie - */ -struct mic_irq; - -/** - * mbus_hw_ops - Hardware operations for accessing a MIC device on the MIC bus. - */ -struct mbus_hw_ops { - struct mic_irq* (*request_threaded_irq)(struct mbus_device *mbdev, - irq_handler_t handler, - irq_handler_t thread_fn, - const char *name, void *data, - int intr_src); - void (*free_irq)(struct mbus_device *mbdev, - struct mic_irq *cookie, void *data); - void (*ack_interrupt)(struct mbus_device *mbdev, int num); -}; - -struct mbus_device * -mbus_register_device(struct device *pdev, int id, const struct dma_map_ops *dma_ops, - struct mbus_hw_ops *hw_ops, int index, - void __iomem *mmio_va); -void mbus_unregister_device(struct mbus_device *mbdev); - -int mbus_register_driver(struct mbus_driver *drv); -void mbus_unregister_driver(struct mbus_driver *drv); - -static inline struct mbus_device *dev_to_mbus(struct device *_dev) -{ - return container_of(_dev, struct mbus_device, dev); -} - -static inline struct mbus_driver *drv_to_mbus(struct device_driver *drv) -{ - return container_of(drv, struct mbus_driver, driver); -} - -#endif /* _MIC_BUS_H */ diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index add85094f9a5..0f23e1ed5e71 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -1213,4 +1213,22 @@ static inline bool mlx5_is_roce_enabled(struct mlx5_core_dev *dev) return val.vbool; } +/** + * mlx5_core_net - Provide net namespace of the mlx5_core_dev + * @dev: mlx5 core device + * + * mlx5_core_net() returns the net namespace of mlx5 core device. + * This can be called only in below described limited context. + * (a) When a devlink instance for mlx5_core is registered and + * when devlink reload operation is disabled. + * or + * (b) during devlink reload reload_down() and reload_up callbacks + * where it is ensured that devlink instance's net namespace is + * stable. + */ +static inline struct net *mlx5_core_net(struct mlx5_core_dev *dev) +{ + return devlink_net(priv_to_devlink(dev)); +} + #endif /* MLX5_DRIVER_H */ diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 651591a2965d..a092346c7b2d 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -5823,7 +5823,7 @@ struct mlx5_ifc_alloc_modify_header_context_in_bits { u8 reserved_at_68[0x10]; u8 num_of_actions[0x8]; - union mlx5_ifc_set_add_copy_action_in_auto_bits actions[0]; + union mlx5_ifc_set_add_copy_action_in_auto_bits actions[]; }; struct mlx5_ifc_dealloc_modify_header_context_out_bits { @@ -9761,7 +9761,7 @@ struct mlx5_ifc_mcda_reg_bits { u8 reserved_at_60[0x20]; - u8 data[0][0x20]; + u8 data[][0x20]; }; enum { diff --git a/include/linux/mm.h b/include/linux/mm.h index ef360fe70aaf..db6ae4d3fb4e 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -2759,6 +2759,15 @@ static inline vm_fault_t vmf_insert_page(struct vm_area_struct *vma, return VM_FAULT_NOPAGE; } +#ifndef io_remap_pfn_range +static inline int io_remap_pfn_range(struct vm_area_struct *vma, + unsigned long addr, unsigned long pfn, + unsigned long size, pgprot_t prot) +{ + return remap_pfn_range(vma, addr, pfn, size, pgprot_decrypted(prot)); +} +#endif + static inline vm_fault_t vmf_error(int err) { if (err == -ENOMEM) diff --git a/include/linux/module.h b/include/linux/module.h index 7ccdf87f376f..6264617bab4d 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -740,7 +740,7 @@ static inline bool within_module(unsigned long addr, const struct module *mod) } /* Get/put a kernel symbol (calls should be symmetric) */ -#define symbol_get(x) ({ extern typeof(x) x __attribute__((weak)); &(x); }) +#define symbol_get(x) ({ extern typeof(x) x __attribute__((weak,visibility("hidden"))); &(x); }) #define symbol_put(x) do { } while (0) #define symbol_put_addr(x) do { } while (0) diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h index 89016d08f6a2..f6267e2883f2 100644 --- a/include/linux/netfilter/nfnetlink.h +++ b/include/linux/netfilter/nfnetlink.h @@ -24,6 +24,12 @@ struct nfnl_callback { const u_int16_t attr_count; /* number of nlattr's */ }; +enum nfnl_abort_action { + NFNL_ABORT_NONE = 0, + NFNL_ABORT_AUTOLOAD, + NFNL_ABORT_VALIDATE, +}; + struct nfnetlink_subsystem { const char *name; __u8 subsys_id; /* nfnetlink subsystem ID */ @@ -31,7 +37,8 @@ struct nfnetlink_subsystem { const struct nfnl_callback *cb; /* callback for individual types */ struct module *owner; int (*commit)(struct net *net, struct sk_buff *skb); - int (*abort)(struct net *net, struct sk_buff *skb, bool autoload); + int (*abort)(struct net *net, struct sk_buff *skb, + enum nfnl_abort_action action); void (*cleanup)(struct net *net); bool (*valid_genid)(struct net *net, u32 genid); }; diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h index 082e2c41b7ff..5b70ca868bb1 100644 --- a/include/linux/netfilter_ipv4.h +++ b/include/linux/netfilter_ipv4.h @@ -16,7 +16,7 @@ struct ip_rt_info { u_int32_t mark; }; -int ip_route_me_harder(struct net *net, struct sk_buff *skb, unsigned addr_type); +int ip_route_me_harder(struct net *net, struct sock *sk, struct sk_buff *skb, unsigned addr_type); struct nf_queue_entry; diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h index 9b67394471e1..48314ade1506 100644 --- a/include/linux/netfilter_ipv6.h +++ b/include/linux/netfilter_ipv6.h @@ -42,7 +42,7 @@ struct nf_ipv6_ops { #if IS_MODULE(CONFIG_IPV6) int (*chk_addr)(struct net *net, const struct in6_addr *addr, const struct net_device *dev, int strict); - int (*route_me_harder)(struct net *net, struct sk_buff *skb); + int (*route_me_harder)(struct net *net, struct sock *sk, struct sk_buff *skb); int (*dev_get_saddr)(struct net *net, const struct net_device *dev, const struct in6_addr *daddr, unsigned int srcprefs, struct in6_addr *saddr); @@ -143,9 +143,9 @@ static inline int nf_br_ip6_fragment(struct net *net, struct sock *sk, #endif } -int ip6_route_me_harder(struct net *net, struct sk_buff *skb); +int ip6_route_me_harder(struct net *net, struct sock *sk, struct sk_buff *skb); -static inline int nf_ip6_route_me_harder(struct net *net, struct sk_buff *skb) +static inline int nf_ip6_route_me_harder(struct net *net, struct sock *sk, struct sk_buff *skb) { #if IS_MODULE(CONFIG_IPV6) const struct nf_ipv6_ops *v6_ops = nf_get_ipv6_ops(); @@ -153,9 +153,9 @@ static inline int nf_ip6_route_me_harder(struct net *net, struct sk_buff *skb) if (!v6_ops) return -EHOSTUNREACH; - return v6_ops->route_me_harder(net, skb); + return v6_ops->route_me_harder(net, sk, skb); #elif IS_BUILTIN(CONFIG_IPV6) - return ip6_route_me_harder(net, skb); + return ip6_route_me_harder(net, sk, skb); #else return -EHOSTUNREACH; #endif diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index c77b7c31b2e4..e1e19c1f9ec9 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -344,9 +344,9 @@ static inline struct page *find_get_page_flags(struct address_space *mapping, /** * find_lock_page - locate, pin and lock a pagecache page * @mapping: the address_space to search - * @offset: the page index + * @index: the page index * - * Looks up the page cache entry at @mapping & @offset. If there is a + * Looks up the page cache entry at @mapping & @index. If there is a * page cache page, it is returned locked and with an increased * refcount. * @@ -363,9 +363,9 @@ static inline struct page *find_lock_page(struct address_space *mapping, /** * find_lock_head - Locate, pin and lock a pagecache page. * @mapping: The address_space to search. - * @offset: The page index. + * @index: The page index. * - * Looks up the page cache entry at @mapping & @offset. If there is a + * Looks up the page cache entry at @mapping & @index. If there is a * page cache page, its head page is returned locked and with an increased * refcount. * diff --git a/include/linux/pgtable.h b/include/linux/pgtable.h index 38c33eabea89..71125a4676c4 100644 --- a/include/linux/pgtable.h +++ b/include/linux/pgtable.h @@ -1427,10 +1427,6 @@ typedef unsigned int pgtbl_mod_mask; #endif /* !__ASSEMBLY__ */ -#ifndef io_remap_pfn_range -#define io_remap_pfn_range remap_pfn_range -#endif - #ifndef has_transparent_hugepage #ifdef CONFIG_TRANSPARENT_HUGEPAGE #define has_transparent_hugepage() 1 diff --git a/include/linux/phy.h b/include/linux/phy.h index eb3cb1a98b45..56563e5e0dc7 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -147,16 +147,8 @@ typedef enum { PHY_INTERFACE_MODE_MAX, } phy_interface_t; -/** +/* * phy_supported_speeds - return all speeds currently supported by a PHY device - * @phy: The PHY device to return supported speeds of. - * @speeds: buffer to store supported speeds in. - * @size: size of speeds buffer. - * - * Description: Returns the number of supported speeds, and fills - * the speeds buffer with the supported speeds. If speeds buffer is - * too small to contain all currently supported speeds, will return as - * many speeds as can fit. */ unsigned int phy_supported_speeds(struct phy_device *phy, unsigned int *speeds, @@ -1022,14 +1014,9 @@ static inline int __phy_modify_changed(struct phy_device *phydev, u32 regnum, regnum, mask, set); } -/** +/* * phy_read_mmd - Convenience function for reading a register * from an MMD on a given PHY. - * @phydev: The phy_device struct - * @devad: The MMD to read from - * @regnum: The register on the MMD to read - * - * Same rules as for phy_read(); */ int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); @@ -1064,38 +1051,21 @@ int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); __ret; \ }) -/** +/* * __phy_read_mmd - Convenience function for reading a register * from an MMD on a given PHY. - * @phydev: The phy_device struct - * @devad: The MMD to read from - * @regnum: The register on the MMD to read - * - * Same rules as for __phy_read(); */ int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); -/** +/* * phy_write_mmd - Convenience function for writing a register * on an MMD on a given PHY. - * @phydev: The phy_device struct - * @devad: The MMD to write to - * @regnum: The register on the MMD to read - * @val: value to write to @regnum - * - * Same rules as for phy_write(); */ int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val); -/** +/* * __phy_write_mmd - Convenience function for writing a register * on an MMD on a given PHY. - * @phydev: The phy_device struct - * @devad: The MMD to write to - * @regnum: The register on the MMD to read - * @val: value to write to @regnum - * - * Same rules as for __phy_write(); */ int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val); diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index 1fcfe9e63cb9..a3a9a878415f 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -1419,7 +1419,7 @@ struct ec_response_flash_info_2 { uint16_t num_banks_total; /* Number of banks described in banks array. */ uint16_t num_banks_desc; - struct ec_flash_bank banks[0]; + struct ec_flash_bank banks[]; } __ec_align4; /* @@ -2420,12 +2420,12 @@ struct ec_response_motion_sense_fifo_info { /* Total amount of vector lost */ uint16_t total_lost; /* Lost events since the last fifo_info, per sensors */ - uint16_t lost[0]; + uint16_t lost[]; } __ec_todo_packed; struct ec_response_motion_sense_fifo_data { uint32_t number_data; - struct ec_response_motion_sensor_data data[0]; + struct ec_response_motion_sensor_data data[]; } __ec_todo_packed; /* List supported activity recognition */ @@ -3093,7 +3093,7 @@ struct ec_response_tmp006_get_calibration_v1 { uint8_t algorithm; uint8_t num_params; uint8_t reserved[2]; - float val[0]; + float val[]; } __ec_align4; struct ec_params_tmp006_set_calibration_v1 { @@ -3101,7 +3101,7 @@ struct ec_params_tmp006_set_calibration_v1 { uint8_t algorithm; uint8_t num_params; uint8_t reserved; - float val[0]; + float val[]; } __ec_align4; @@ -5076,7 +5076,7 @@ struct ec_response_pd_log { uint8_t type; /* event type : see PD_EVENT_xx below */ uint8_t size_port; /* [7:5] port number [4:0] payload size in bytes */ uint16_t data; /* type-defined data payload */ - uint8_t payload[0]; /* optional additional data payload: 0..16 bytes */ + uint8_t payload[]; /* optional additional data payload: 0..16 bytes */ } __ec_align4; /* The timestamp is the microsecond counter shifted to get about a ms. */ @@ -5789,7 +5789,7 @@ struct ec_response_fp_encryption_status { struct ec_response_tp_frame_info { uint32_t n_frames; - uint32_t frame_sizes[0]; + uint32_t frame_sizes[]; } __ec_align4; /* Create a snapshot of current frame readings */ diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h index 4a415ae851ef..02599687770c 100644 --- a/include/linux/platform_data/cros_ec_proto.h +++ b/include/linux/platform_data/cros_ec_proto.h @@ -69,7 +69,7 @@ struct cros_ec_command { uint32_t outsize; uint32_t insize; uint32_t result; - uint8_t data[0]; + uint8_t data[]; }; /** diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index 18b02dcc168e..4b708f4e8eed 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -54,11 +54,10 @@ extern u64 pm_runtime_autosuspend_expiration(struct device *dev); extern void pm_runtime_update_max_time_suspended(struct device *dev, s64 delta_ns); extern void pm_runtime_set_memalloc_noio(struct device *dev, bool enable); -extern void pm_runtime_clean_up_links(struct device *dev); extern void pm_runtime_get_suppliers(struct device *dev); extern void pm_runtime_put_suppliers(struct device *dev); extern void pm_runtime_new_link(struct device *dev); -extern void pm_runtime_drop_link(struct device *dev); +extern void pm_runtime_drop_link(struct device_link *link); /** * pm_runtime_get_if_in_use - Conditionally bump up runtime PM usage counter. @@ -276,11 +275,10 @@ static inline u64 pm_runtime_autosuspend_expiration( struct device *dev) { return 0; } static inline void pm_runtime_set_memalloc_noio(struct device *dev, bool enable){} -static inline void pm_runtime_clean_up_links(struct device *dev) {} static inline void pm_runtime_get_suppliers(struct device *dev) {} static inline void pm_runtime_put_suppliers(struct device *dev) {} static inline void pm_runtime_new_link(struct device *dev) {} -static inline void pm_runtime_drop_link(struct device *dev) {} +static inline void pm_runtime_drop_link(struct device_link *link) {} #endif /* !CONFIG_PM */ diff --git a/include/linux/refcount.h b/include/linux/refcount.h index 7fabb1af18e0..497990c69b0b 100644 --- a/include/linux/refcount.h +++ b/include/linux/refcount.h @@ -147,24 +147,6 @@ static inline unsigned int refcount_read(const refcount_t *r) return atomic_read(&r->refs); } -/** - * refcount_add_not_zero - add a value to a refcount unless it is 0 - * @i: the value to add to the refcount - * @r: the refcount - * - * Will saturate at REFCOUNT_SATURATED and WARN. - * - * Provides no memory ordering, it is assumed the caller has guaranteed the - * object memory to be stable (RCU, etc.). It does provide a control dependency - * and thereby orders future stores. See the comment on top. - * - * Use of this function is not recommended for the normal reference counting - * use case in which references are taken and released one at a time. In these - * cases, refcount_inc(), or one of its variants, should instead be used to - * increment a reference count. - * - * Return: false if the passed refcount is 0, true otherwise - */ static inline __must_check bool __refcount_add_not_zero(int i, refcount_t *r, int *oldp) { int old = refcount_read(r); @@ -183,17 +165,12 @@ static inline __must_check bool __refcount_add_not_zero(int i, refcount_t *r, in return old; } -static inline __must_check bool refcount_add_not_zero(int i, refcount_t *r) -{ - return __refcount_add_not_zero(i, r, NULL); -} - /** - * refcount_add - add a value to a refcount + * refcount_add_not_zero - add a value to a refcount unless it is 0 * @i: the value to add to the refcount * @r: the refcount * - * Similar to atomic_add(), but will saturate at REFCOUNT_SATURATED and WARN. + * Will saturate at REFCOUNT_SATURATED and WARN. * * Provides no memory ordering, it is assumed the caller has guaranteed the * object memory to be stable (RCU, etc.). It does provide a control dependency @@ -203,7 +180,14 @@ static inline __must_check bool refcount_add_not_zero(int i, refcount_t *r) * use case in which references are taken and released one at a time. In these * cases, refcount_inc(), or one of its variants, should instead be used to * increment a reference count. + * + * Return: false if the passed refcount is 0, true otherwise */ +static inline __must_check bool refcount_add_not_zero(int i, refcount_t *r) +{ + return __refcount_add_not_zero(i, r, NULL); +} + static inline void __refcount_add(int i, refcount_t *r, int *oldp) { int old = atomic_fetch_add_relaxed(i, &r->refs); @@ -217,11 +201,32 @@ static inline void __refcount_add(int i, refcount_t *r, int *oldp) refcount_warn_saturate(r, REFCOUNT_ADD_OVF); } +/** + * refcount_add - add a value to a refcount + * @i: the value to add to the refcount + * @r: the refcount + * + * Similar to atomic_add(), but will saturate at REFCOUNT_SATURATED and WARN. + * + * Provides no memory ordering, it is assumed the caller has guaranteed the + * object memory to be stable (RCU, etc.). It does provide a control dependency + * and thereby orders future stores. See the comment on top. + * + * Use of this function is not recommended for the normal reference counting + * use case in which references are taken and released one at a time. In these + * cases, refcount_inc(), or one of its variants, should instead be used to + * increment a reference count. + */ static inline void refcount_add(int i, refcount_t *r) { __refcount_add(i, r, NULL); } +static inline __must_check bool __refcount_inc_not_zero(refcount_t *r, int *oldp) +{ + return __refcount_add_not_zero(1, r, oldp); +} + /** * refcount_inc_not_zero - increment a refcount unless it is 0 * @r: the refcount to increment @@ -235,14 +240,14 @@ static inline void refcount_add(int i, refcount_t *r) * * Return: true if the increment was successful, false otherwise */ -static inline __must_check bool __refcount_inc_not_zero(refcount_t *r, int *oldp) +static inline __must_check bool refcount_inc_not_zero(refcount_t *r) { - return __refcount_add_not_zero(1, r, oldp); + return __refcount_inc_not_zero(r, NULL); } -static inline __must_check bool refcount_inc_not_zero(refcount_t *r) +static inline void __refcount_inc(refcount_t *r, int *oldp) { - return __refcount_inc_not_zero(r, NULL); + __refcount_add(1, r, oldp); } /** @@ -257,14 +262,27 @@ static inline __must_check bool refcount_inc_not_zero(refcount_t *r) * Will WARN if the refcount is 0, as this represents a possible use-after-free * condition. */ -static inline void __refcount_inc(refcount_t *r, int *oldp) +static inline void refcount_inc(refcount_t *r) { - __refcount_add(1, r, oldp); + __refcount_inc(r, NULL); } -static inline void refcount_inc(refcount_t *r) +static inline __must_check bool __refcount_sub_and_test(int i, refcount_t *r, int *oldp) { - __refcount_inc(r, NULL); + int old = atomic_fetch_sub_release(i, &r->refs); + + if (oldp) + *oldp = old; + + if (old == i) { + smp_acquire__after_ctrl_dep(); + return true; + } + + if (unlikely(old < 0 || old - i < 0)) + refcount_warn_saturate(r, REFCOUNT_SUB_UAF); + + return false; } /** @@ -287,27 +305,14 @@ static inline void refcount_inc(refcount_t *r) * * Return: true if the resulting refcount is 0, false otherwise */ -static inline __must_check bool __refcount_sub_and_test(int i, refcount_t *r, int *oldp) +static inline __must_check bool refcount_sub_and_test(int i, refcount_t *r) { - int old = atomic_fetch_sub_release(i, &r->refs); - - if (oldp) - *oldp = old; - - if (old == i) { - smp_acquire__after_ctrl_dep(); - return true; - } - - if (unlikely(old < 0 || old - i < 0)) - refcount_warn_saturate(r, REFCOUNT_SUB_UAF); - - return false; + return __refcount_sub_and_test(i, r, NULL); } -static inline __must_check bool refcount_sub_and_test(int i, refcount_t *r) +static inline __must_check bool __refcount_dec_and_test(refcount_t *r, int *oldp) { - return __refcount_sub_and_test(i, r, NULL); + return __refcount_sub_and_test(1, r, oldp); } /** @@ -323,26 +328,11 @@ static inline __must_check bool refcount_sub_and_test(int i, refcount_t *r) * * Return: true if the resulting refcount is 0, false otherwise */ -static inline __must_check bool __refcount_dec_and_test(refcount_t *r, int *oldp) -{ - return __refcount_sub_and_test(1, r, oldp); -} - static inline __must_check bool refcount_dec_and_test(refcount_t *r) { return __refcount_dec_and_test(r, NULL); } -/** - * refcount_dec - decrement a refcount - * @r: the refcount - * - * Similar to atomic_dec(), it will WARN on underflow and fail to decrement - * when saturated at REFCOUNT_SATURATED. - * - * Provides release memory ordering, such that prior loads and stores are done - * before. - */ static inline void __refcount_dec(refcount_t *r, int *oldp) { int old = atomic_fetch_sub_release(1, &r->refs); @@ -354,6 +344,16 @@ static inline void __refcount_dec(refcount_t *r, int *oldp) refcount_warn_saturate(r, REFCOUNT_DEC_LEAK); } +/** + * refcount_dec - decrement a refcount + * @r: the refcount + * + * Similar to atomic_dec(), it will WARN on underflow and fail to decrement + * when saturated at REFCOUNT_SATURATED. + * + * Provides release memory ordering, such that prior loads and stores are done + * before. + */ static inline void refcount_dec(refcount_t *r) { __refcount_dec(r, NULL); diff --git a/include/linux/scif.h b/include/linux/scif.h deleted file mode 100644 index 329e695b8fe5..000000000000 --- a/include/linux/scif.h +++ /dev/null @@ -1,1339 +0,0 @@ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2014 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * BSD LICENSE - * - * Copyright(c) 2014 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Intel SCIF driver. - * - */ -#ifndef __SCIF_H__ -#define __SCIF_H__ - -#include <linux/types.h> -#include <linux/poll.h> -#include <linux/device.h> -#include <linux/scif_ioctl.h> - -#define SCIF_ACCEPT_SYNC 1 -#define SCIF_SEND_BLOCK 1 -#define SCIF_RECV_BLOCK 1 - -enum { - SCIF_PROT_READ = (1 << 0), - SCIF_PROT_WRITE = (1 << 1) -}; - -enum { - SCIF_MAP_FIXED = 0x10, - SCIF_MAP_KERNEL = 0x20, -}; - -enum { - SCIF_FENCE_INIT_SELF = (1 << 0), - SCIF_FENCE_INIT_PEER = (1 << 1), - SCIF_SIGNAL_LOCAL = (1 << 4), - SCIF_SIGNAL_REMOTE = (1 << 5) -}; - -enum { - SCIF_RMA_USECPU = (1 << 0), - SCIF_RMA_USECACHE = (1 << 1), - SCIF_RMA_SYNC = (1 << 2), - SCIF_RMA_ORDERED = (1 << 3) -}; - -/* End of SCIF Admin Reserved Ports */ -#define SCIF_ADMIN_PORT_END 1024 - -/* End of SCIF Reserved Ports */ -#define SCIF_PORT_RSVD 1088 - -typedef struct scif_endpt *scif_epd_t; -typedef struct scif_pinned_pages *scif_pinned_pages_t; - -/** - * struct scif_range - SCIF registered range used in kernel mode - * @cookie: cookie used internally by SCIF - * @nr_pages: number of pages of PAGE_SIZE - * @prot_flags: R/W protection - * @phys_addr: Array of bus addresses - * @va: Array of kernel virtual addresses backed by the pages in the phys_addr - * array. The va is populated only when called on the host for a remote - * SCIF connection on MIC. This is required to support the use case of DMA - * between MIC and another device which is not a SCIF node e.g., an IB or - * ethernet NIC. - */ -struct scif_range { - void *cookie; - int nr_pages; - int prot_flags; - dma_addr_t *phys_addr; - void __iomem **va; -}; - -/** - * struct scif_pollepd - SCIF endpoint to be monitored via scif_poll - * @epd: SCIF endpoint - * @events: requested events - * @revents: returned events - */ -struct scif_pollepd { - scif_epd_t epd; - __poll_t events; - __poll_t revents; -}; - -/** - * scif_peer_dev - representation of a peer SCIF device - * - * Peer devices show up as PCIe devices for the mgmt node but not the cards. - * The mgmt node discovers all the cards on the PCIe bus and informs the other - * cards about their peers. Upon notification of a peer a node adds a peer - * device to the peer bus to maintain symmetry in the way devices are - * discovered across all nodes in the SCIF network. - * - * @dev: underlying device - * @dnode - The destination node which this device will communicate with. - */ -struct scif_peer_dev { - struct device dev; - u8 dnode; -}; - -/** - * scif_client - representation of a SCIF client - * @name: client name - * @probe - client method called when a peer device is registered - * @remove - client method called when a peer device is unregistered - * @si - subsys_interface used internally for implementing SCIF clients - */ -struct scif_client { - const char *name; - void (*probe)(struct scif_peer_dev *spdev); - void (*remove)(struct scif_peer_dev *spdev); - struct subsys_interface si; -}; - -#define SCIF_OPEN_FAILED ((scif_epd_t)-1) -#define SCIF_REGISTER_FAILED ((off_t)-1) -#define SCIF_MMAP_FAILED ((void *)-1) - -/** - * scif_open() - Create an endpoint - * - * Return: - * Upon successful completion, scif_open() returns an endpoint descriptor to - * be used in subsequent SCIF functions calls to refer to that endpoint; - * otherwise in user mode SCIF_OPEN_FAILED (that is ((scif_epd_t)-1)) is - * returned and errno is set to indicate the error; in kernel mode a NULL - * scif_epd_t is returned. - * - * Errors: - * ENOMEM - Insufficient kernel memory was available - */ -scif_epd_t scif_open(void); - -/** - * scif_bind() - Bind an endpoint to a port - * @epd: endpoint descriptor - * @pn: port number - * - * scif_bind() binds endpoint epd to port pn, where pn is a port number on the - * local node. If pn is zero, a port number greater than or equal to - * SCIF_PORT_RSVD is assigned and returned. Each endpoint may be bound to - * exactly one local port. Ports less than 1024 when requested can only be bound - * by system (or root) processes or by processes executed by privileged users. - * - * Return: - * Upon successful completion, scif_bind() returns the port number to which epd - * is bound; otherwise in user mode -1 is returned and errno is set to - * indicate the error; in kernel mode the negative of one of the following - * errors is returned. - * - * Errors: - * EBADF, ENOTTY - epd is not a valid endpoint descriptor - * EINVAL - the endpoint or the port is already bound - * EISCONN - The endpoint is already connected - * ENOSPC - No port number available for assignment - * EACCES - The port requested is protected and the user is not the superuser - */ -int scif_bind(scif_epd_t epd, u16 pn); - -/** - * scif_listen() - Listen for connections on an endpoint - * @epd: endpoint descriptor - * @backlog: maximum pending connection requests - * - * scif_listen() marks the endpoint epd as a listening endpoint - that is, as - * an endpoint that will be used to accept incoming connection requests. Once - * so marked, the endpoint is said to be in the listening state and may not be - * used as the endpoint of a connection. - * - * The endpoint, epd, must have been bound to a port. - * - * The backlog argument defines the maximum length to which the queue of - * pending connections for epd may grow. If a connection request arrives when - * the queue is full, the client may receive an error with an indication that - * the connection was refused. - * - * Return: - * Upon successful completion, scif_listen() returns 0; otherwise in user mode - * -1 is returned and errno is set to indicate the error; in kernel mode the - * negative of one of the following errors is returned. - * - * Errors: - * EBADF, ENOTTY - epd is not a valid endpoint descriptor - * EINVAL - the endpoint is not bound to a port - * EISCONN - The endpoint is already connected or listening - */ -int scif_listen(scif_epd_t epd, int backlog); - -/** - * scif_connect() - Initiate a connection on a port - * @epd: endpoint descriptor - * @dst: global id of port to which to connect - * - * The scif_connect() function requests the connection of endpoint epd to remote - * port dst. If the connection is successful, a peer endpoint, bound to dst, is - * created on node dst.node. On successful return, the connection is complete. - * - * If the endpoint epd has not already been bound to a port, scif_connect() - * will bind it to an unused local port. - * - * A connection is terminated when an endpoint of the connection is closed, - * either explicitly by scif_close(), or when a process that owns one of the - * endpoints of the connection is terminated. - * - * In user space, scif_connect() supports an asynchronous connection mode - * if the application has set the O_NONBLOCK flag on the endpoint via the - * fcntl() system call. Setting this flag will result in the calling process - * not to wait during scif_connect(). - * - * Return: - * Upon successful completion, scif_connect() returns the port ID to which the - * endpoint, epd, is bound; otherwise in user mode -1 is returned and errno is - * set to indicate the error; in kernel mode the negative of one of the - * following errors is returned. - * - * Errors: - * EBADF, ENOTTY - epd is not a valid endpoint descriptor - * ECONNREFUSED - The destination was not listening for connections or refused - * the connection request - * EINVAL - dst.port is not a valid port ID - * EISCONN - The endpoint is already connected - * ENOMEM - No buffer space is available - * ENODEV - The destination node does not exist, or the node is lost or existed, - * but is not currently in the network since it may have crashed - * ENOSPC - No port number available for assignment - * EOPNOTSUPP - The endpoint is listening and cannot be connected - */ -int scif_connect(scif_epd_t epd, struct scif_port_id *dst); - -/** - * scif_accept() - Accept a connection on an endpoint - * @epd: endpoint descriptor - * @peer: global id of port to which connected - * @newepd: new connected endpoint descriptor - * @flags: flags - * - * The scif_accept() call extracts the first connection request from the queue - * of pending connections for the port on which epd is listening. scif_accept() - * creates a new endpoint, bound to the same port as epd, and allocates a new - * SCIF endpoint descriptor, returned in newepd, for the endpoint. The new - * endpoint is connected to the endpoint through which the connection was - * requested. epd is unaffected by this call, and remains in the listening - * state. - * - * On successful return, peer holds the global port identifier (node id and - * local port number) of the port which requested the connection. - * - * A connection is terminated when an endpoint of the connection is closed, - * either explicitly by scif_close(), or when a process that owns one of the - * endpoints of the connection is terminated. - * - * The number of connections that can (subsequently) be accepted on epd is only - * limited by system resources (memory). - * - * The flags argument is formed by OR'ing together zero or more of the - * following values. - * SCIF_ACCEPT_SYNC - block until a connection request is presented. If - * SCIF_ACCEPT_SYNC is not in flags, and no pending - * connections are present on the queue, scif_accept() - * fails with an EAGAIN error - * - * In user mode, the select() and poll() functions can be used to determine - * when there is a connection request. In kernel mode, the scif_poll() - * function may be used for this purpose. A readable event will be delivered - * when a connection is requested. - * - * Return: - * Upon successful completion, scif_accept() returns 0; otherwise in user mode - * -1 is returned and errno is set to indicate the error; in kernel mode the - * negative of one of the following errors is returned. - * - * Errors: - * EAGAIN - SCIF_ACCEPT_SYNC is not set and no connections are present to be - * accepted or SCIF_ACCEPT_SYNC is not set and remote node failed to complete - * its connection request - * EBADF, ENOTTY - epd is not a valid endpoint descriptor - * EINTR - Interrupted function - * EINVAL - epd is not a listening endpoint, or flags is invalid, or peer is - * NULL, or newepd is NULL - * ENODEV - The requesting node is lost or existed, but is not currently in the - * network since it may have crashed - * ENOMEM - Not enough space - * ENOENT - Secondary part of epd registration failed - */ -int scif_accept(scif_epd_t epd, struct scif_port_id *peer, scif_epd_t - *newepd, int flags); - -/** - * scif_close() - Close an endpoint - * @epd: endpoint descriptor - * - * scif_close() closes an endpoint and performs necessary teardown of - * facilities associated with that endpoint. - * - * If epd is a listening endpoint then it will no longer accept connection - * requests on the port to which it is bound. Any pending connection requests - * are rejected. - * - * If epd is a connected endpoint, then its peer endpoint is also closed. RMAs - * which are in-process through epd or its peer endpoint will complete before - * scif_close() returns. Registered windows of the local and peer endpoints are - * released as if scif_unregister() was called against each window. - * - * Closing a SCIF endpoint does not affect local registered memory mapped by - * a SCIF endpoint on a remote node. The local memory remains mapped by the peer - * SCIF endpoint explicitly removed by calling munmap(..) by the peer. - * - * If the peer endpoint's receive queue is not empty at the time that epd is - * closed, then the peer endpoint can be passed as the endpoint parameter to - * scif_recv() until the receive queue is empty. - * - * epd is freed and may no longer be accessed. - * - * Return: - * Upon successful completion, scif_close() returns 0; otherwise in user mode - * -1 is returned and errno is set to indicate the error; in kernel mode the - * negative of one of the following errors is returned. - * - * Errors: - * EBADF, ENOTTY - epd is not a valid endpoint descriptor - */ -int scif_close(scif_epd_t epd); - -/** - * scif_send() - Send a message - * @epd: endpoint descriptor - * @msg: message buffer address - * @len: message length - * @flags: blocking mode flags - * - * scif_send() sends data to the peer of endpoint epd. Up to len bytes of data - * are copied from memory starting at address msg. On successful execution the - * return value of scif_send() is the number of bytes that were sent, and is - * zero if no bytes were sent because len was zero. scif_send() may be called - * only when the endpoint is in a connected state. - * - * If a scif_send() call is non-blocking, then it sends only those bytes which - * can be sent without waiting, up to a maximum of len bytes. - * - * If a scif_send() call is blocking, then it normally returns after sending - * all len bytes. If a blocking call is interrupted or the connection is - * reset, the call is considered successful if some bytes were sent or len is - * zero, otherwise the call is considered unsuccessful. - * - * In user mode, the select() and poll() functions can be used to determine - * when the send queue is not full. In kernel mode, the scif_poll() function - * may be used for this purpose. - * - * It is recommended that scif_send()/scif_recv() only be used for short - * control-type message communication between SCIF endpoints. The SCIF RMA - * APIs are expected to provide better performance for transfer sizes of - * 1024 bytes or longer for the current MIC hardware and software - * implementation. - * - * scif_send() will block until the entire message is sent if SCIF_SEND_BLOCK - * is passed as the flags argument. - * - * Return: - * Upon successful completion, scif_send() returns the number of bytes sent; - * otherwise in user mode -1 is returned and errno is set to indicate the - * error; in kernel mode the negative of one of the following errors is - * returned. - * - * Errors: - * EBADF, ENOTTY - epd is not a valid endpoint descriptor - * ECONNRESET - Connection reset by peer - * EINVAL - flags is invalid, or len is negative - * ENODEV - The remote node is lost or existed, but is not currently in the - * network since it may have crashed - * ENOMEM - Not enough space - * ENOTCONN - The endpoint is not connected - */ -int scif_send(scif_epd_t epd, void *msg, int len, int flags); - -/** - * scif_recv() - Receive a message - * @epd: endpoint descriptor - * @msg: message buffer address - * @len: message buffer length - * @flags: blocking mode flags - * - * scif_recv() receives data from the peer of endpoint epd. Up to len bytes of - * data are copied to memory starting at address msg. On successful execution - * the return value of scif_recv() is the number of bytes that were received, - * and is zero if no bytes were received because len was zero. scif_recv() may - * be called only when the endpoint is in a connected state. - * - * If a scif_recv() call is non-blocking, then it receives only those bytes - * which can be received without waiting, up to a maximum of len bytes. - * - * If a scif_recv() call is blocking, then it normally returns after receiving - * all len bytes. If the blocking call was interrupted due to a disconnection, - * subsequent calls to scif_recv() will copy all bytes received upto the point - * of disconnection. - * - * In user mode, the select() and poll() functions can be used to determine - * when data is available to be received. In kernel mode, the scif_poll() - * function may be used for this purpose. - * - * It is recommended that scif_send()/scif_recv() only be used for short - * control-type message communication between SCIF endpoints. The SCIF RMA - * APIs are expected to provide better performance for transfer sizes of - * 1024 bytes or longer for the current MIC hardware and software - * implementation. - * - * scif_recv() will block until the entire message is received if - * SCIF_RECV_BLOCK is passed as the flags argument. - * - * Return: - * Upon successful completion, scif_recv() returns the number of bytes - * received; otherwise in user mode -1 is returned and errno is set to - * indicate the error; in kernel mode the negative of one of the following - * errors is returned. - * - * Errors: - * EAGAIN - The destination node is returning from a low power state - * EBADF, ENOTTY - epd is not a valid endpoint descriptor - * ECONNRESET - Connection reset by peer - * EINVAL - flags is invalid, or len is negative - * ENODEV - The remote node is lost or existed, but is not currently in the - * network since it may have crashed - * ENOMEM - Not enough space - * ENOTCONN - The endpoint is not connected - */ -int scif_recv(scif_epd_t epd, void *msg, int len, int flags); - -/** - * scif_register() - Mark a memory region for remote access. - * @epd: endpoint descriptor - * @addr: starting virtual address - * @len: length of range - * @offset: offset of window - * @prot_flags: read/write protection flags - * @map_flags: mapping flags - * - * The scif_register() function opens a window, a range of whole pages of the - * registered address space of the endpoint epd, starting at offset po and - * continuing for len bytes. The value of po, further described below, is a - * function of the parameters offset and len, and the value of map_flags. Each - * page of the window represents the physical memory page which backs the - * corresponding page of the range of virtual address pages starting at addr - * and continuing for len bytes. addr and len are constrained to be multiples - * of the page size. A successful scif_register() call returns po. - * - * When SCIF_MAP_FIXED is set in the map_flags argument, po will be offset - * exactly, and offset is constrained to be a multiple of the page size. The - * mapping established by scif_register() will not replace any existing - * registration; an error is returned if any page within the range [offset, - * offset + len - 1] intersects an existing window. - * - * When SCIF_MAP_FIXED is not set, the implementation uses offset in an - * implementation-defined manner to arrive at po. The po value so chosen will - * be an area of the registered address space that the implementation deems - * suitable for a mapping of len bytes. An offset value of 0 is interpreted as - * granting the implementation complete freedom in selecting po, subject to - * constraints described below. A non-zero value of offset is taken to be a - * suggestion of an offset near which the mapping should be placed. When the - * implementation selects a value for po, it does not replace any extant - * window. In all cases, po will be a multiple of the page size. - * - * The physical pages which are so represented by a window are available for - * access in calls to mmap(), scif_readfrom(), scif_writeto(), - * scif_vreadfrom(), and scif_vwriteto(). While a window is registered, the - * physical pages represented by the window will not be reused by the memory - * subsystem for any other purpose. Note that the same physical page may be - * represented by multiple windows. - * - * Subsequent operations which change the memory pages to which virtual - * addresses are mapped (such as mmap(), munmap()) have no effect on - * existing window. - * - * If the process will fork(), it is recommended that the registered - * virtual address range be marked with MADV_DONTFORK. Doing so will prevent - * problems due to copy-on-write semantics. - * - * The prot_flags argument is formed by OR'ing together one or more of the - * following values. - * SCIF_PROT_READ - allow read operations from the window - * SCIF_PROT_WRITE - allow write operations to the window - * - * Return: - * Upon successful completion, scif_register() returns the offset at which the - * mapping was placed (po); otherwise in user mode SCIF_REGISTER_FAILED (that - * is (off_t *)-1) is returned and errno is set to indicate the error; in - * kernel mode the negative of one of the following errors is returned. - * - * Errors: - * EADDRINUSE - SCIF_MAP_FIXED is set in map_flags, and pages in the range - * [offset, offset + len -1] are already registered - * EAGAIN - The mapping could not be performed due to lack of resources - * EBADF, ENOTTY - epd is not a valid endpoint descriptor - * ECONNRESET - Connection reset by peer - * EINVAL - map_flags is invalid, or prot_flags is invalid, or SCIF_MAP_FIXED is - * set in flags, and offset is not a multiple of the page size, or addr is not a - * multiple of the page size, or len is not a multiple of the page size, or is - * 0, or offset is negative - * ENODEV - The remote node is lost or existed, but is not currently in the - * network since it may have crashed - * ENOMEM - Not enough space - * ENOTCONN -The endpoint is not connected - */ -off_t scif_register(scif_epd_t epd, void *addr, size_t len, off_t offset, - int prot_flags, int map_flags); - -/** - * scif_unregister() - Mark a memory region for remote access. - * @epd: endpoint descriptor - * @offset: start of range to unregister - * @len: length of range to unregister - * - * The scif_unregister() function closes those previously registered windows - * which are entirely within the range [offset, offset + len - 1]. It is an - * error to specify a range which intersects only a subrange of a window. - * - * On a successful return, pages within the window may no longer be specified - * in calls to mmap(), scif_readfrom(), scif_writeto(), scif_vreadfrom(), - * scif_vwriteto(), scif_get_pages, and scif_fence_signal(). The window, - * however, continues to exist until all previous references against it are - * removed. A window is referenced if there is a mapping to it created by - * mmap(), or if scif_get_pages() was called against the window - * (and the pages have not been returned via scif_put_pages()). A window is - * also referenced while an RMA, in which some range of the window is a source - * or destination, is in progress. Finally a window is referenced while some - * offset in that window was specified to scif_fence_signal(), and the RMAs - * marked by that call to scif_fence_signal() have not completed. While a - * window is in this state, its registered address space pages are not - * available for use in a new registered window. - * - * When all such references to the window have been removed, its references to - * all the physical pages which it represents are removed. Similarly, the - * registered address space pages of the window become available for - * registration in a new window. - * - * Return: - * Upon successful completion, scif_unregister() returns 0; otherwise in user - * mode -1 is returned and errno is set to indicate the error; in kernel mode - * the negative of one of the following errors is returned. In the event of an - * error, no windows are unregistered. - * - * Errors: - * EBADF, ENOTTY - epd is not a valid endpoint descriptor - * ECONNRESET - Connection reset by peer - * EINVAL - the range [offset, offset + len - 1] intersects a subrange of a - * window, or offset is negative - * ENODEV - The remote node is lost or existed, but is not currently in the - * network since it may have crashed - * ENOTCONN - The endpoint is not connected - * ENXIO - Offsets in the range [offset, offset + len - 1] are invalid for the - * registered address space of epd - */ -int scif_unregister(scif_epd_t epd, off_t offset, size_t len); - -/** - * scif_readfrom() - Copy from a remote address space - * @epd: endpoint descriptor - * @loffset: offset in local registered address space to - * which to copy - * @len: length of range to copy - * @roffset: offset in remote registered address space - * from which to copy - * @rma_flags: transfer mode flags - * - * scif_readfrom() copies len bytes from the remote registered address space of - * the peer of endpoint epd, starting at the offset roffset to the local - * registered address space of epd, starting at the offset loffset. - * - * Each of the specified ranges [loffset, loffset + len - 1] and [roffset, - * roffset + len - 1] must be within some registered window or windows of the - * local and remote nodes. A range may intersect multiple registered windows, - * but only if those windows are contiguous in the registered address space. - * - * If rma_flags includes SCIF_RMA_USECPU, then the data is copied using - * programmed read/writes. Otherwise the data is copied using DMA. If rma_- - * flags includes SCIF_RMA_SYNC, then scif_readfrom() will return after the - * transfer is complete. Otherwise, the transfer may be performed asynchron- - * ously. The order in which any two asynchronous RMA operations complete - * is non-deterministic. The synchronization functions, scif_fence_mark()/ - * scif_fence_wait() and scif_fence_signal(), can be used to synchronize to - * the completion of asynchronous RMA operations on the same endpoint. - * - * The DMA transfer of individual bytes is not guaranteed to complete in - * address order. If rma_flags includes SCIF_RMA_ORDERED, then the last - * cacheline or partial cacheline of the source range will become visible on - * the destination node after all other transferred data in the source - * range has become visible on the destination node. - * - * The optimal DMA performance will likely be realized if both - * loffset and roffset are cacheline aligned (are a multiple of 64). Lower - * performance will likely be realized if loffset and roffset are not - * cacheline aligned but are separated by some multiple of 64. The lowest level - * of performance is likely if loffset and roffset are not separated by a - * multiple of 64. - * - * The rma_flags argument is formed by ORing together zero or more of the - * following values. - * SCIF_RMA_USECPU - perform the transfer using the CPU, otherwise use the DMA - * engine. - * SCIF_RMA_SYNC - perform the transfer synchronously, returning after the - * transfer has completed. Passing this flag results in the - * current implementation busy waiting and consuming CPU cycles - * while the DMA transfer is in progress for best performance by - * avoiding the interrupt latency. - * SCIF_RMA_ORDERED - ensure that the last cacheline or partial cacheline of - * the source range becomes visible on the destination node - * after all other transferred data in the source range has - * become visible on the destination - * - * Return: - * Upon successful completion, scif_readfrom() returns 0; otherwise in user - * mode -1 is returned and errno is set to indicate the error; in kernel mode - * the negative of one of the following errors is returned. - * - * Errors: - * EACCES - Attempt to write to a read-only range - * EBADF, ENOTTY - epd is not a valid endpoint descriptor - * ECONNRESET - Connection reset by peer - * EINVAL - rma_flags is invalid - * ENODEV - The remote node is lost or existed, but is not currently in the - * network since it may have crashed - * ENOTCONN - The endpoint is not connected - * ENXIO - The range [loffset, loffset + len - 1] is invalid for the registered - * address space of epd, or, The range [roffset, roffset + len - 1] is invalid - * for the registered address space of the peer of epd, or loffset or roffset - * is negative - */ -int scif_readfrom(scif_epd_t epd, off_t loffset, size_t len, off_t - roffset, int rma_flags); - -/** - * scif_writeto() - Copy to a remote address space - * @epd: endpoint descriptor - * @loffset: offset in local registered address space - * from which to copy - * @len: length of range to copy - * @roffset: offset in remote registered address space to - * which to copy - * @rma_flags: transfer mode flags - * - * scif_writeto() copies len bytes from the local registered address space of - * epd, starting at the offset loffset to the remote registered address space - * of the peer of endpoint epd, starting at the offset roffset. - * - * Each of the specified ranges [loffset, loffset + len - 1] and [roffset, - * roffset + len - 1] must be within some registered window or windows of the - * local and remote nodes. A range may intersect multiple registered windows, - * but only if those windows are contiguous in the registered address space. - * - * If rma_flags includes SCIF_RMA_USECPU, then the data is copied using - * programmed read/writes. Otherwise the data is copied using DMA. If rma_- - * flags includes SCIF_RMA_SYNC, then scif_writeto() will return after the - * transfer is complete. Otherwise, the transfer may be performed asynchron- - * ously. The order in which any two asynchronous RMA operations complete - * is non-deterministic. The synchronization functions, scif_fence_mark()/ - * scif_fence_wait() and scif_fence_signal(), can be used to synchronize to - * the completion of asynchronous RMA operations on the same endpoint. - * - * The DMA transfer of individual bytes is not guaranteed to complete in - * address order. If rma_flags includes SCIF_RMA_ORDERED, then the last - * cacheline or partial cacheline of the source range will become visible on - * the destination node after all other transferred data in the source - * range has become visible on the destination node. - * - * The optimal DMA performance will likely be realized if both - * loffset and roffset are cacheline aligned (are a multiple of 64). Lower - * performance will likely be realized if loffset and roffset are not cacheline - * aligned but are separated by some multiple of 64. The lowest level of - * performance is likely if loffset and roffset are not separated by a multiple - * of 64. - * - * The rma_flags argument is formed by ORing together zero or more of the - * following values. - * SCIF_RMA_USECPU - perform the transfer using the CPU, otherwise use the DMA - * engine. - * SCIF_RMA_SYNC - perform the transfer synchronously, returning after the - * transfer has completed. Passing this flag results in the - * current implementation busy waiting and consuming CPU cycles - * while the DMA transfer is in progress for best performance by - * avoiding the interrupt latency. - * SCIF_RMA_ORDERED - ensure that the last cacheline or partial cacheline of - * the source range becomes visible on the destination node - * after all other transferred data in the source range has - * become visible on the destination - * - * Return: - * Upon successful completion, scif_readfrom() returns 0; otherwise in user - * mode -1 is returned and errno is set to indicate the error; in kernel mode - * the negative of one of the following errors is returned. - * - * Errors: - * EACCES - Attempt to write to a read-only range - * EBADF, ENOTTY - epd is not a valid endpoint descriptor - * ECONNRESET - Connection reset by peer - * EINVAL - rma_flags is invalid - * ENODEV - The remote node is lost or existed, but is not currently in the - * network since it may have crashed - * ENOTCONN - The endpoint is not connected - * ENXIO - The range [loffset, loffset + len - 1] is invalid for the registered - * address space of epd, or, The range [roffset , roffset + len -1] is invalid - * for the registered address space of the peer of epd, or loffset or roffset - * is negative - */ -int scif_writeto(scif_epd_t epd, off_t loffset, size_t len, off_t - roffset, int rma_flags); - -/** - * scif_vreadfrom() - Copy from a remote address space - * @epd: endpoint descriptor - * @addr: address to which to copy - * @len: length of range to copy - * @roffset: offset in remote registered address space - * from which to copy - * @rma_flags: transfer mode flags - * - * scif_vreadfrom() copies len bytes from the remote registered address - * space of the peer of endpoint epd, starting at the offset roffset, to local - * memory, starting at addr. - * - * The specified range [roffset, roffset + len - 1] must be within some - * registered window or windows of the remote nodes. The range may - * intersect multiple registered windows, but only if those windows are - * contiguous in the registered address space. - * - * If rma_flags includes SCIF_RMA_USECPU, then the data is copied using - * programmed read/writes. Otherwise the data is copied using DMA. If rma_- - * flags includes SCIF_RMA_SYNC, then scif_vreadfrom() will return after the - * transfer is complete. Otherwise, the transfer may be performed asynchron- - * ously. The order in which any two asynchronous RMA operations complete - * is non-deterministic. The synchronization functions, scif_fence_mark()/ - * scif_fence_wait() and scif_fence_signal(), can be used to synchronize to - * the completion of asynchronous RMA operations on the same endpoint. - * - * The DMA transfer of individual bytes is not guaranteed to complete in - * address order. If rma_flags includes SCIF_RMA_ORDERED, then the last - * cacheline or partial cacheline of the source range will become visible on - * the destination node after all other transferred data in the source - * range has become visible on the destination node. - * - * If rma_flags includes SCIF_RMA_USECACHE, then the physical pages which back - * the specified local memory range may be remain in a pinned state even after - * the specified transfer completes. This may reduce overhead if some or all of - * the same virtual address range is referenced in a subsequent call of - * scif_vreadfrom() or scif_vwriteto(). - * - * The optimal DMA performance will likely be realized if both - * addr and roffset are cacheline aligned (are a multiple of 64). Lower - * performance will likely be realized if addr and roffset are not - * cacheline aligned but are separated by some multiple of 64. The lowest level - * of performance is likely if addr and roffset are not separated by a - * multiple of 64. - * - * The rma_flags argument is formed by ORing together zero or more of the - * following values. - * SCIF_RMA_USECPU - perform the transfer using the CPU, otherwise use the DMA - * engine. - * SCIF_RMA_USECACHE - enable registration caching - * SCIF_RMA_SYNC - perform the transfer synchronously, returning after the - * transfer has completed. Passing this flag results in the - * current implementation busy waiting and consuming CPU cycles - * while the DMA transfer is in progress for best performance by - * avoiding the interrupt latency. - * SCIF_RMA_ORDERED - ensure that the last cacheline or partial cacheline of - * the source range becomes visible on the destination node - * after all other transferred data in the source range has - * become visible on the destination - * - * Return: - * Upon successful completion, scif_vreadfrom() returns 0; otherwise in user - * mode -1 is returned and errno is set to indicate the error; in kernel mode - * the negative of one of the following errors is returned. - * - * Errors: - * EACCES - Attempt to write to a read-only range - * EBADF, ENOTTY - epd is not a valid endpoint descriptor - * ECONNRESET - Connection reset by peer - * EINVAL - rma_flags is invalid - * ENODEV - The remote node is lost or existed, but is not currently in the - * network since it may have crashed - * ENOTCONN - The endpoint is not connected - * ENXIO - Offsets in the range [roffset, roffset + len - 1] are invalid for the - * registered address space of epd - */ -int scif_vreadfrom(scif_epd_t epd, void *addr, size_t len, off_t roffset, - int rma_flags); - -/** - * scif_vwriteto() - Copy to a remote address space - * @epd: endpoint descriptor - * @addr: address from which to copy - * @len: length of range to copy - * @roffset: offset in remote registered address space to - * which to copy - * @rma_flags: transfer mode flags - * - * scif_vwriteto() copies len bytes from the local memory, starting at addr, to - * the remote registered address space of the peer of endpoint epd, starting at - * the offset roffset. - * - * The specified range [roffset, roffset + len - 1] must be within some - * registered window or windows of the remote nodes. The range may intersect - * multiple registered windows, but only if those windows are contiguous in the - * registered address space. - * - * If rma_flags includes SCIF_RMA_USECPU, then the data is copied using - * programmed read/writes. Otherwise the data is copied using DMA. If rma_- - * flags includes SCIF_RMA_SYNC, then scif_vwriteto() will return after the - * transfer is complete. Otherwise, the transfer may be performed asynchron- - * ously. The order in which any two asynchronous RMA operations complete - * is non-deterministic. The synchronization functions, scif_fence_mark()/ - * scif_fence_wait() and scif_fence_signal(), can be used to synchronize to - * the completion of asynchronous RMA operations on the same endpoint. - * - * The DMA transfer of individual bytes is not guaranteed to complete in - * address order. If rma_flags includes SCIF_RMA_ORDERED, then the last - * cacheline or partial cacheline of the source range will become visible on - * the destination node after all other transferred data in the source - * range has become visible on the destination node. - * - * If rma_flags includes SCIF_RMA_USECACHE, then the physical pages which back - * the specified local memory range may be remain in a pinned state even after - * the specified transfer completes. This may reduce overhead if some or all of - * the same virtual address range is referenced in a subsequent call of - * scif_vreadfrom() or scif_vwriteto(). - * - * The optimal DMA performance will likely be realized if both - * addr and offset are cacheline aligned (are a multiple of 64). Lower - * performance will likely be realized if addr and offset are not cacheline - * aligned but are separated by some multiple of 64. The lowest level of - * performance is likely if addr and offset are not separated by a multiple of - * 64. - * - * The rma_flags argument is formed by ORing together zero or more of the - * following values. - * SCIF_RMA_USECPU - perform the transfer using the CPU, otherwise use the DMA - * engine. - * SCIF_RMA_USECACHE - allow registration caching - * SCIF_RMA_SYNC - perform the transfer synchronously, returning after the - * transfer has completed. Passing this flag results in the - * current implementation busy waiting and consuming CPU cycles - * while the DMA transfer is in progress for best performance by - * avoiding the interrupt latency. - * SCIF_RMA_ORDERED - ensure that the last cacheline or partial cacheline of - * the source range becomes visible on the destination node - * after all other transferred data in the source range has - * become visible on the destination - * - * Return: - * Upon successful completion, scif_vwriteto() returns 0; otherwise in user - * mode -1 is returned and errno is set to indicate the error; in kernel mode - * the negative of one of the following errors is returned. - * - * Errors: - * EACCES - Attempt to write to a read-only range - * EBADF, ENOTTY - epd is not a valid endpoint descriptor - * ECONNRESET - Connection reset by peer - * EINVAL - rma_flags is invalid - * ENODEV - The remote node is lost or existed, but is not currently in the - * network since it may have crashed - * ENOTCONN - The endpoint is not connected - * ENXIO - Offsets in the range [roffset, roffset + len - 1] are invalid for the - * registered address space of epd - */ -int scif_vwriteto(scif_epd_t epd, void *addr, size_t len, off_t roffset, - int rma_flags); - -/** - * scif_fence_mark() - Mark previously issued RMAs - * @epd: endpoint descriptor - * @flags: control flags - * @mark: marked value returned as output. - * - * scif_fence_mark() returns after marking the current set of all uncompleted - * RMAs initiated through the endpoint epd or the current set of all - * uncompleted RMAs initiated through the peer of endpoint epd. The RMAs are - * marked with a value returned at mark. The application may subsequently call - * scif_fence_wait(), passing the value returned at mark, to await completion - * of all RMAs so marked. - * - * The flags argument has exactly one of the following values. - * SCIF_FENCE_INIT_SELF - RMA operations initiated through endpoint - * epd are marked - * SCIF_FENCE_INIT_PEER - RMA operations initiated through the peer - * of endpoint epd are marked - * - * Return: - * Upon successful completion, scif_fence_mark() returns 0; otherwise in user - * mode -1 is returned and errno is set to indicate the error; in kernel mode - * the negative of one of the following errors is returned. - * - * Errors: - * EBADF, ENOTTY - epd is not a valid endpoint descriptor - * ECONNRESET - Connection reset by peer - * EINVAL - flags is invalid - * ENODEV - The remote node is lost or existed, but is not currently in the - * network since it may have crashed - * ENOTCONN - The endpoint is not connected - * ENOMEM - Insufficient kernel memory was available - */ -int scif_fence_mark(scif_epd_t epd, int flags, int *mark); - -/** - * scif_fence_wait() - Wait for completion of marked RMAs - * @epd: endpoint descriptor - * @mark: mark request - * - * scif_fence_wait() returns after all RMAs marked with mark have completed. - * The value passed in mark must have been obtained in a previous call to - * scif_fence_mark(). - * - * Return: - * Upon successful completion, scif_fence_wait() returns 0; otherwise in user - * mode -1 is returned and errno is set to indicate the error; in kernel mode - * the negative of one of the following errors is returned. - * - * Errors: - * EBADF, ENOTTY - epd is not a valid endpoint descriptor - * ECONNRESET - Connection reset by peer - * ENODEV - The remote node is lost or existed, but is not currently in the - * network since it may have crashed - * ENOTCONN - The endpoint is not connected - * ENOMEM - Insufficient kernel memory was available - */ -int scif_fence_wait(scif_epd_t epd, int mark); - -/** - * scif_fence_signal() - Request a memory update on completion of RMAs - * @epd: endpoint descriptor - * @loff: local offset - * @lval: local value to write to loffset - * @roff: remote offset - * @rval: remote value to write to roffset - * @flags: flags - * - * scif_fence_signal() returns after marking the current set of all uncompleted - * RMAs initiated through the endpoint epd or marking the current set of all - * uncompleted RMAs initiated through the peer of endpoint epd. - * - * If flags includes SCIF_SIGNAL_LOCAL, then on completion of the RMAs in the - * marked set, lval is written to memory at the address corresponding to offset - * loff in the local registered address space of epd. loff must be within a - * registered window. If flags includes SCIF_SIGNAL_REMOTE, then on completion - * of the RMAs in the marked set, rval is written to memory at the address - * corresponding to offset roff in the remote registered address space of epd. - * roff must be within a remote registered window of the peer of epd. Note - * that any specified offset must be DWORD (4 byte / 32 bit) aligned. - * - * The flags argument is formed by OR'ing together the following. - * Exactly one of the following values. - * SCIF_FENCE_INIT_SELF - RMA operations initiated through endpoint - * epd are marked - * SCIF_FENCE_INIT_PEER - RMA operations initiated through the peer - * of endpoint epd are marked - * One or more of the following values. - * SCIF_SIGNAL_LOCAL - On completion of the marked set of RMAs, write lval to - * memory at the address corresponding to offset loff in the local - * registered address space of epd. - * SCIF_SIGNAL_REMOTE - On completion of the marked set of RMAs, write rval to - * memory at the address corresponding to offset roff in the remote - * registered address space of epd. - * - * Return: - * Upon successful completion, scif_fence_signal() returns 0; otherwise in - * user mode -1 is returned and errno is set to indicate the error; in kernel - * mode the negative of one of the following errors is returned. - * - * Errors: - * EBADF, ENOTTY - epd is not a valid endpoint descriptor - * ECONNRESET - Connection reset by peer - * EINVAL - flags is invalid, or loff or roff are not DWORD aligned - * ENODEV - The remote node is lost or existed, but is not currently in the - * network since it may have crashed - * ENOTCONN - The endpoint is not connected - * ENXIO - loff is invalid for the registered address of epd, or roff is invalid - * for the registered address space, of the peer of epd - */ -int scif_fence_signal(scif_epd_t epd, off_t loff, u64 lval, off_t roff, - u64 rval, int flags); - -/** - * scif_get_node_ids() - Return information about online nodes - * @nodes: array in which to return online node IDs - * @len: number of entries in the nodes array - * @self: address to place the node ID of the local node - * - * scif_get_node_ids() fills in the nodes array with up to len node IDs of the - * nodes in the SCIF network. If there is not enough space in nodes, as - * indicated by the len parameter, only len node IDs are returned in nodes. The - * return value of scif_get_node_ids() is the total number of nodes currently in - * the SCIF network. By checking the return value against the len parameter, - * the user may determine if enough space for nodes was allocated. - * - * The node ID of the local node is returned at self. - * - * Return: - * Upon successful completion, scif_get_node_ids() returns the actual number of - * online nodes in the SCIF network including 'self'; otherwise in user mode - * -1 is returned and errno is set to indicate the error; in kernel mode no - * errors are returned. - */ -int scif_get_node_ids(u16 *nodes, int len, u16 *self); - -/** - * scif_pin_pages() - Pin a set of pages - * @addr: Virtual address of range to pin - * @len: Length of range to pin - * @prot_flags: Page protection flags - * @map_flags: Page classification flags - * @pinned_pages: Handle to pinned pages - * - * scif_pin_pages() pins (locks in physical memory) the physical pages which - * back the range of virtual address pages starting at addr and continuing for - * len bytes. addr and len are constrained to be multiples of the page size. A - * successful scif_pin_pages() call returns a handle to pinned_pages which may - * be used in subsequent calls to scif_register_pinned_pages(). - * - * The pages will remain pinned as long as there is a reference against the - * scif_pinned_pages_t value returned by scif_pin_pages() and until - * scif_unpin_pages() is called, passing the scif_pinned_pages_t value. A - * reference is added to a scif_pinned_pages_t value each time a window is - * created by calling scif_register_pinned_pages() and passing the - * scif_pinned_pages_t value. A reference is removed from a - * scif_pinned_pages_t value each time such a window is deleted. - * - * Subsequent operations which change the memory pages to which virtual - * addresses are mapped (such as mmap(), munmap()) have no effect on the - * scif_pinned_pages_t value or windows created against it. - * - * If the process will fork(), it is recommended that the registered - * virtual address range be marked with MADV_DONTFORK. Doing so will prevent - * problems due to copy-on-write semantics. - * - * The prot_flags argument is formed by OR'ing together one or more of the - * following values. - * SCIF_PROT_READ - allow read operations against the pages - * SCIF_PROT_WRITE - allow write operations against the pages - * The map_flags argument can be set as SCIF_MAP_KERNEL to interpret addr as a - * kernel space address. By default, addr is interpreted as a user space - * address. - * - * Return: - * Upon successful completion, scif_pin_pages() returns 0; otherwise the - * negative of one of the following errors is returned. - * - * Errors: - * EINVAL - prot_flags is invalid, map_flags is invalid, or offset is negative - * ENOMEM - Not enough space - */ -int scif_pin_pages(void *addr, size_t len, int prot_flags, int map_flags, - scif_pinned_pages_t *pinned_pages); - -/** - * scif_unpin_pages() - Unpin a set of pages - * @pinned_pages: Handle to pinned pages to be unpinned - * - * scif_unpin_pages() prevents scif_register_pinned_pages() from registering new - * windows against pinned_pages. The physical pages represented by pinned_pages - * will remain pinned until all windows previously registered against - * pinned_pages are deleted (the window is scif_unregister()'d and all - * references to the window are removed (see scif_unregister()). - * - * pinned_pages must have been obtain from a previous call to scif_pin_pages(). - * After calling scif_unpin_pages(), it is an error to pass pinned_pages to - * scif_register_pinned_pages(). - * - * Return: - * Upon successful completion, scif_unpin_pages() returns 0; otherwise the - * negative of one of the following errors is returned. - * - * Errors: - * EINVAL - pinned_pages is not valid - */ -int scif_unpin_pages(scif_pinned_pages_t pinned_pages); - -/** - * scif_register_pinned_pages() - Mark a memory region for remote access. - * @epd: endpoint descriptor - * @pinned_pages: Handle to pinned pages - * @offset: Registered address space offset - * @map_flags: Flags which control where pages are mapped - * - * The scif_register_pinned_pages() function opens a window, a range of whole - * pages of the registered address space of the endpoint epd, starting at - * offset po. The value of po, further described below, is a function of the - * parameters offset and pinned_pages, and the value of map_flags. Each page of - * the window represents a corresponding physical memory page of the range - * represented by pinned_pages; the length of the window is the same as the - * length of range represented by pinned_pages. A successful - * scif_register_pinned_pages() call returns po as the return value. - * - * When SCIF_MAP_FIXED is set in the map_flags argument, po will be offset - * exactly, and offset is constrained to be a multiple of the page size. The - * mapping established by scif_register_pinned_pages() will not replace any - * existing registration; an error is returned if any page of the new window - * would intersect an existing window. - * - * When SCIF_MAP_FIXED is not set, the implementation uses offset in an - * implementation-defined manner to arrive at po. The po so chosen will be an - * area of the registered address space that the implementation deems suitable - * for a mapping of the required size. An offset value of 0 is interpreted as - * granting the implementation complete freedom in selecting po, subject to - * constraints described below. A non-zero value of offset is taken to be a - * suggestion of an offset near which the mapping should be placed. When the - * implementation selects a value for po, it does not replace any extant - * window. In all cases, po will be a multiple of the page size. - * - * The physical pages which are so represented by a window are available for - * access in calls to scif_get_pages(), scif_readfrom(), scif_writeto(), - * scif_vreadfrom(), and scif_vwriteto(). While a window is registered, the - * physical pages represented by the window will not be reused by the memory - * subsystem for any other purpose. Note that the same physical page may be - * represented by multiple windows. - * - * Windows created by scif_register_pinned_pages() are unregistered by - * scif_unregister(). - * - * The map_flags argument can be set to SCIF_MAP_FIXED which interprets a - * fixed offset. - * - * Return: - * Upon successful completion, scif_register_pinned_pages() returns the offset - * at which the mapping was placed (po); otherwise the negative of one of the - * following errors is returned. - * - * Errors: - * EADDRINUSE - SCIF_MAP_FIXED is set in map_flags and pages in the new window - * would intersect an existing window - * EAGAIN - The mapping could not be performed due to lack of resources - * ECONNRESET - Connection reset by peer - * EINVAL - map_flags is invalid, or SCIF_MAP_FIXED is set in map_flags, and - * offset is not a multiple of the page size, or offset is negative - * ENODEV - The remote node is lost or existed, but is not currently in the - * network since it may have crashed - * ENOMEM - Not enough space - * ENOTCONN - The endpoint is not connected - */ -off_t scif_register_pinned_pages(scif_epd_t epd, - scif_pinned_pages_t pinned_pages, - off_t offset, int map_flags); - -/** - * scif_get_pages() - Add references to remote registered pages - * @epd: endpoint descriptor - * @offset: remote registered offset - * @len: length of range of pages - * @pages: returned scif_range structure - * - * scif_get_pages() returns the addresses of the physical pages represented by - * those pages of the registered address space of the peer of epd, starting at - * offset and continuing for len bytes. offset and len are constrained to be - * multiples of the page size. - * - * All of the pages in the specified range [offset, offset + len - 1] must be - * within a single window of the registered address space of the peer of epd. - * - * The addresses are returned as a virtually contiguous array pointed to by the - * phys_addr component of the scif_range structure whose address is returned in - * pages. The nr_pages component of scif_range is the length of the array. The - * prot_flags component of scif_range holds the protection flag value passed - * when the pages were registered. - * - * Each physical page whose address is returned by scif_get_pages() remains - * available and will not be released for reuse until the scif_range structure - * is returned in a call to scif_put_pages(). The scif_range structure returned - * by scif_get_pages() must be unmodified. - * - * It is an error to call scif_close() on an endpoint on which a scif_range - * structure of that endpoint has not been returned to scif_put_pages(). - * - * Return: - * Upon successful completion, scif_get_pages() returns 0; otherwise the - * negative of one of the following errors is returned. - * Errors: - * ECONNRESET - Connection reset by peer. - * EINVAL - offset is not a multiple of the page size, or offset is negative, or - * len is not a multiple of the page size - * ENODEV - The remote node is lost or existed, but is not currently in the - * network since it may have crashed - * ENOTCONN - The endpoint is not connected - * ENXIO - Offsets in the range [offset, offset + len - 1] are invalid - * for the registered address space of the peer epd - */ -int scif_get_pages(scif_epd_t epd, off_t offset, size_t len, - struct scif_range **pages); - -/** - * scif_put_pages() - Remove references from remote registered pages - * @pages: pages to be returned - * - * scif_put_pages() releases a scif_range structure previously obtained by - * calling scif_get_pages(). The physical pages represented by pages may - * be reused when the window which represented those pages is unregistered. - * Therefore, those pages must not be accessed after calling scif_put_pages(). - * - * Return: - * Upon successful completion, scif_put_pages() returns 0; otherwise the - * negative of one of the following errors is returned. - * Errors: - * EINVAL - pages does not point to a valid scif_range structure, or - * the scif_range structure pointed to by pages was already returned - * ENODEV - The remote node is lost or existed, but is not currently in the - * network since it may have crashed - * ENOTCONN - The endpoint is not connected - */ -int scif_put_pages(struct scif_range *pages); - -/** - * scif_poll() - Wait for some event on an endpoint - * @epds: Array of endpoint descriptors - * @nepds: Length of epds - * @timeout: Upper limit on time for which scif_poll() will block - * - * scif_poll() waits for one of a set of endpoints to become ready to perform - * an I/O operation. - * - * The epds argument specifies the endpoint descriptors to be examined and the - * events of interest for each endpoint descriptor. epds is a pointer to an - * array with one member for each open endpoint descriptor of interest. - * - * The number of items in the epds array is specified in nepds. The epd field - * of scif_pollepd is an endpoint descriptor of an open endpoint. The field - * events is a bitmask specifying the events which the application is - * interested in. The field revents is an output parameter, filled by the - * kernel with the events that actually occurred. The bits returned in revents - * can include any of those specified in events, or one of the values EPOLLERR, - * EPOLLHUP, or EPOLLNVAL. (These three bits are meaningless in the events - * field, and will be set in the revents field whenever the corresponding - * condition is true.) - * - * If none of the events requested (and no error) has occurred for any of the - * endpoint descriptors, then scif_poll() blocks until one of the events occurs. - * - * The timeout argument specifies an upper limit on the time for which - * scif_poll() will block, in milliseconds. Specifying a negative value in - * timeout means an infinite timeout. - * - * The following bits may be set in events and returned in revents. - * EPOLLIN - Data may be received without blocking. For a connected - * endpoint, this means that scif_recv() may be called without blocking. For a - * listening endpoint, this means that scif_accept() may be called without - * blocking. - * EPOLLOUT - Data may be sent without blocking. For a connected endpoint, this - * means that scif_send() may be called without blocking. EPOLLOUT may also be - * used to block waiting for a non-blocking connect to complete. This bit value - * has no meaning for a listening endpoint and is ignored if specified. - * - * The following bits are only returned in revents, and are ignored if set in - * events. - * EPOLLERR - An error occurred on the endpoint - * EPOLLHUP - The connection to the peer endpoint was disconnected - * EPOLLNVAL - The specified endpoint descriptor is invalid. - * - * Return: - * Upon successful completion, scif_poll() returns a non-negative value. A - * positive value indicates the total number of endpoint descriptors that have - * been selected (that is, endpoint descriptors for which the revents member is - * non-zero). A value of 0 indicates that the call timed out and no endpoint - * descriptors have been selected. Otherwise in user mode -1 is returned and - * errno is set to indicate the error; in kernel mode the negative of one of - * the following errors is returned. - * - * Errors: - * EINTR - A signal occurred before any requested event - * EINVAL - The nepds argument is greater than {OPEN_MAX} - * ENOMEM - There was no space to allocate file descriptor tables - */ -int scif_poll(struct scif_pollepd *epds, unsigned int nepds, long timeout); - -/** - * scif_client_register() - Register a SCIF client - * @client: client to be registered - * - * scif_client_register() registers a SCIF client. The probe() method - * of the client is called when SCIF peer devices come online and the - * remove() method is called when the peer devices disappear. - * - * Return: - * Upon successful completion, scif_client_register() returns a non-negative - * value. Otherwise the return value is the same as subsys_interface_register() - * in the kernel. - */ -int scif_client_register(struct scif_client *client); - -/** - * scif_client_unregister() - Unregister a SCIF client - * @client: client to be unregistered - * - * scif_client_unregister() unregisters a SCIF client. - * - * Return: - * None - */ -void scif_client_unregister(struct scif_client *client); - -#endif /* __SCIF_H__ */ diff --git a/include/linux/signal.h b/include/linux/signal.h index 7bbc0e9cf084..b256f9c65661 100644 --- a/include/linux/signal.h +++ b/include/linux/signal.h @@ -238,6 +238,7 @@ static inline void siginitset(sigset_t *set, unsigned long mask) memset(&set->sig[1], 0, sizeof(long)*(_NSIG_WORDS-1)); break; case 2: set->sig[1] = 0; + break; case 1: ; } } @@ -250,6 +251,7 @@ static inline void siginitsetinv(sigset_t *set, unsigned long mask) memset(&set->sig[1], -1, sizeof(long)*(_NSIG_WORDS-1)); break; case 2: set->sig[1] = -1; + break; case 1: ; } } diff --git a/include/linux/time64.h b/include/linux/time64.h index c9dcb3e5781f..5117cb5b5656 100644 --- a/include/linux/time64.h +++ b/include/linux/time64.h @@ -124,6 +124,10 @@ static inline bool timespec64_valid_settod(const struct timespec64 *ts) */ static inline s64 timespec64_to_ns(const struct timespec64 *ts) { + /* Prevent multiplication overflow */ + if ((unsigned long long)ts->tv_sec >= KTIME_SEC_MAX) + return KTIME_MAX; + return ((s64) ts->tv_sec * NSEC_PER_SEC) + ts->tv_nsec; } diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 2040696d75b6..a2d229ab63ba 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -437,7 +437,7 @@ static inline struct usb_composite_driver *to_cdriver( #define OS_STRING_IDX 0xEE /** - * struct usb_composite_device - represents one composite usb gadget + * struct usb_composite_dev - represents one composite usb gadget * @gadget: read-only, abstracts the gadget's usb peripheral controller * @req: used for control responses; buffer is pre-allocated * @os_desc_req: used for OS descriptors responses; buffer is pre-allocated diff --git a/include/linux/vdpa.h b/include/linux/vdpa.h index eae0bfd87d91..30bc7a7223bb 100644 --- a/include/linux/vdpa.h +++ b/include/linux/vdpa.h @@ -53,6 +53,16 @@ struct vdpa_device { }; /** + * vDPA IOVA range - the IOVA range support by the device + * @first: start of the IOVA range + * @last: end of the IOVA range + */ +struct vdpa_iova_range { + u64 first; + u64 last; +}; + +/** * vDPA_config_ops - operations for configuring a vDPA device. * Note: vDPA device drivers are required to implement all of the * operations unless it is mentioned to be optional in the following @@ -151,6 +161,10 @@ struct vdpa_device { * @get_generation: Get device config generation (optional) * @vdev: vdpa device * Returns u32: device generation + * @get_iova_range: Get supported iova range (optional) + * @vdev: vdpa device + * Returns the iova range supported by + * the device. * @set_map: Set device memory mapping (optional) * Needed for device that using device * specific DMA translation (on-chip IOMMU) @@ -216,6 +230,7 @@ struct vdpa_config_ops { void (*set_config)(struct vdpa_device *vdev, unsigned int offset, const void *buf, unsigned int len); u32 (*get_generation)(struct vdpa_device *vdev); + struct vdpa_iova_range (*get_iova_range)(struct vdpa_device *vdev); /* DMA ops */ int (*set_map)(struct vdpa_device *vdev, struct vhost_iotlb *iotlb); diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 661edfc8722e..d5ab8d99739f 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1444,7 +1444,7 @@ int cfg80211_check_station_change(struct wiphy *wiphy, enum cfg80211_station_type statype); /** - * enum station_info_rate_flags - bitrate info flags + * enum rate_info_flags - bitrate info flags * * Used by the driver to indicate the specific rate transmission * type for 802.11n transmissions. @@ -1517,7 +1517,7 @@ struct rate_info { }; /** - * enum station_info_rate_flags - bitrate info flags + * enum bss_param_flags - bitrate info flags * * Used by the driver to indicate the specific rate transmission * type for 802.11n transmissions. @@ -6467,7 +6467,8 @@ void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, struct ieee80211_channel *channel, gfp_t gfp); /** - * cfg80211_notify_new_candidate - notify cfg80211 of a new mesh peer candidate + * cfg80211_notify_new_peer_candidate - notify cfg80211 of a new mesh peer + * candidate * * @dev: network device * @macaddr: the MAC address of the new candidate @@ -7606,7 +7607,7 @@ u32 cfg80211_calculate_bitrate(struct rate_info *rate); void cfg80211_unregister_wdev(struct wireless_dev *wdev); /** - * struct cfg80211_ft_event - FT Information Elements + * struct cfg80211_ft_event_params - FT Information Elements * @ies: FT IEs * @ies_len: length of the FT IE in bytes * @target_ap: target AP's MAC address diff --git a/include/net/mac80211.h b/include/net/mac80211.h index e8e295dae744..dcdba96814a2 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3311,7 +3311,7 @@ enum ieee80211_roc_type { }; /** - * enum ieee80211_reconfig_complete_type - reconfig type + * enum ieee80211_reconfig_type - reconfig type * * This enum is used by the reconfig_complete() callback to indicate what * reconfiguration type was completed. @@ -6334,7 +6334,8 @@ bool ieee80211_tx_prepare_skb(struct ieee80211_hw *hw, int band, struct ieee80211_sta **sta); /** - * Sanity-check and parse the radiotap header of injected frames + * ieee80211_parse_tx_radiotap - Sanity-check and parse the radiotap header + * of injected frames * @skb: packet injected by userspace * @dev: the &struct device of this 802.11 device */ @@ -6389,7 +6390,7 @@ int ieee80211_parse_p2p_noa(const struct ieee80211_p2p_noa_attr *attr, void ieee80211_update_p2p_noa(struct ieee80211_noa_data *data, u32 tsf); /** - * ieee80211_tdls_oper - request userspace to perform a TDLS operation + * ieee80211_tdls_oper_request - request userspace to perform a TDLS operation * @vif: virtual interface * @peer: the peer's destination address * @oper: the requested TDLS operation diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h index c672ae1da26b..32a67af18415 100644 --- a/include/rdma/rdma_cm.h +++ b/include/rdma/rdma_cm.h @@ -227,19 +227,9 @@ void rdma_destroy_qp(struct rdma_cm_id *id); int rdma_init_qp_attr(struct rdma_cm_id *id, struct ib_qp_attr *qp_attr, int *qp_attr_mask); -/** - * rdma_connect - Initiate an active connection request. - * @id: Connection identifier to connect. - * @conn_param: Connection information used for connected QPs. - * - * Users must have resolved a route for the rdma_cm_id to connect with - * by having called rdma_resolve_route before calling this routine. - * - * This call will either connect to a remote QP or obtain remote QP - * information for unconnected rdma_cm_id's. The actual operation is - * based on the rdma_cm_id's port space. - */ int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param); +int rdma_connect_locked(struct rdma_cm_id *id, + struct rdma_conn_param *conn_param); int rdma_connect_ece(struct rdma_cm_id *id, struct rdma_conn_param *conn_param, struct rdma_ucm_ece *ece); diff --git a/include/sound/control.h b/include/sound/control.h index e128cff10dfa..77d9fa10812d 100644 --- a/include/sound/control.h +++ b/include/sound/control.h @@ -42,7 +42,7 @@ struct snd_kcontrol_new { snd_ctl_elem_iface_t iface; /* interface identifier */ unsigned int device; /* device/client number */ unsigned int subdevice; /* subdevice (substream) number */ - const unsigned char *name; /* ASCII name of item */ + const char *name; /* ASCII name of item */ unsigned int index; /* index of item */ unsigned int access; /* access rights */ unsigned int count; /* count of same elements */ diff --git a/include/sound/core.h b/include/sound/core.h index 381a010a1bd4..0462c577d7a3 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -332,7 +332,8 @@ void __snd_printk(unsigned int level, const char *file, int line, #define snd_BUG() WARN(1, "BUG?\n") /** - * Suppress high rates of output when CONFIG_SND_DEBUG is enabled. + * snd_printd_ratelimit - Suppress high rates of output when + * CONFIG_SND_DEBUG is enabled. */ #define snd_printd_ratelimit() printk_ratelimit() diff --git a/include/sound/pcm.h b/include/sound/pcm.h index 2ba5df2c9e23..2336bf9243e1 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -1284,8 +1284,8 @@ snd_pcm_sgbuf_get_ptr(struct snd_pcm_substream *substream, unsigned int ofs) } /** - * snd_pcm_sgbuf_chunk_size - Compute the max size that fits within the contig. - * page from the given size + * snd_pcm_sgbuf_get_chunk_size - Compute the max size that fits within the + * contig. page from the given size * @substream: PCM substream * @ofs: byte offset * @size: byte size to examine diff --git a/include/trace/events/afs.h b/include/trace/events/afs.h index 8eb49231c6bb..4eef374d4413 100644 --- a/include/trace/events/afs.h +++ b/include/trace/events/afs.h @@ -966,19 +966,6 @@ TRACE_EVENT(afs_dir_check_failed, __entry->vnode, __entry->off, __entry->i_size) ); -/* - * We use page->private to hold the amount of the page that we've written to, - * splitting the field into two parts. However, we need to represent a range - * 0...PAGE_SIZE inclusive, so we can't support 64K pages on a 32-bit system. - */ -#if PAGE_SIZE > 32768 -#define AFS_PRIV_MAX 0xffffffff -#define AFS_PRIV_SHIFT 32 -#else -#define AFS_PRIV_MAX 0xffff -#define AFS_PRIV_SHIFT 16 -#endif - TRACE_EVENT(afs_page_dirty, TP_PROTO(struct afs_vnode *vnode, const char *where, pgoff_t page, unsigned long priv), @@ -999,10 +986,11 @@ TRACE_EVENT(afs_page_dirty, __entry->priv = priv; ), - TP_printk("vn=%p %lx %s %lu-%lu", + TP_printk("vn=%p %lx %s %zx-%zx%s", __entry->vnode, __entry->page, __entry->where, - __entry->priv & AFS_PRIV_MAX, - __entry->priv >> AFS_PRIV_SHIFT) + afs_page_dirty_from(__entry->priv), + afs_page_dirty_to(__entry->priv), + afs_is_page_dirty_mmapped(__entry->priv) ? " M" : "") ); TRACE_EVENT(afs_call_state, diff --git a/include/uapi/linux/icmpv6.h b/include/uapi/linux/icmpv6.h index c1661febc2dc..0564fd7ccde4 100644 --- a/include/uapi/linux/icmpv6.h +++ b/include/uapi/linux/icmpv6.h @@ -138,6 +138,7 @@ struct icmp6hdr { #define ICMPV6_HDR_FIELD 0 #define ICMPV6_UNK_NEXTHDR 1 #define ICMPV6_UNK_OPTION 2 +#define ICMPV6_HDR_INCOMP 3 /* * constants for (set|get)sockopt diff --git a/include/uapi/linux/mic_common.h b/include/uapi/linux/mic_common.h deleted file mode 100644 index 504e523f702c..000000000000 --- a/include/uapi/linux/mic_common.h +++ /dev/null @@ -1,235 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * The full GNU General Public License is included in this distribution in - * the file called "COPYING". - * - * Intel MIC driver. - * - */ -#ifndef __MIC_COMMON_H_ -#define __MIC_COMMON_H_ - -#include <linux/virtio_ring.h> - -#define __mic_align(a, x) (((a) + (x) - 1) & ~((x) - 1)) - -/** - * struct mic_device_desc: Virtio device information shared between the - * virtio driver and userspace backend - * - * @type: Device type: console/network/disk etc. Type 0/-1 terminates. - * @num_vq: Number of virtqueues. - * @feature_len: Number of bytes of feature bits. Multiply by 2: one for - host features and one for guest acknowledgements. - * @config_len: Number of bytes of the config array after virtqueues. - * @status: A status byte, written by the Guest. - * @config: Start of the following variable length config. - */ -struct mic_device_desc { - __s8 type; - __u8 num_vq; - __u8 feature_len; - __u8 config_len; - __u8 status; - __le64 config[0]; -} __attribute__ ((aligned(8))); - -/** - * struct mic_device_ctrl: Per virtio device information in the device page - * used internally by the host and card side drivers. - * - * @vdev: Used for storing MIC vdev information by the guest. - * @config_change: Set to 1 by host when a config change is requested. - * @vdev_reset: Set to 1 by guest to indicate virtio device has been reset. - * @guest_ack: Set to 1 by guest to ack a command. - * @host_ack: Set to 1 by host to ack a command. - * @used_address_updated: Set to 1 by guest when the used address should be - * updated. - * @c2h_vdev_db: The doorbell number to be used by guest. Set by host. - * @h2c_vdev_db: The doorbell number to be used by host. Set by guest. - */ -struct mic_device_ctrl { - __le64 vdev; - __u8 config_change; - __u8 vdev_reset; - __u8 guest_ack; - __u8 host_ack; - __u8 used_address_updated; - __s8 c2h_vdev_db; - __s8 h2c_vdev_db; -} __attribute__ ((aligned(8))); - -/** - * struct mic_bootparam: Virtio device independent information in device page - * - * @magic: A magic value used by the card to ensure it can see the host - * @h2c_config_db: Host to Card Virtio config doorbell set by card - * @node_id: Unique id of the node - * @h2c_scif_db - Host to card SCIF doorbell set by card - * @c2h_scif_db - Card to host SCIF doorbell set by host - * @scif_host_dma_addr - SCIF host queue pair DMA address - * @scif_card_dma_addr - SCIF card queue pair DMA address - */ -struct mic_bootparam { - __le32 magic; - __s8 h2c_config_db; - __u8 node_id; - __u8 h2c_scif_db; - __u8 c2h_scif_db; - __u64 scif_host_dma_addr; - __u64 scif_card_dma_addr; -} __attribute__ ((aligned(8))); - -/** - * struct mic_device_page: High level representation of the device page - * - * @bootparam: The bootparam structure is used for sharing information and - * status updates between MIC host and card drivers. - * @desc: Array of MIC virtio device descriptors. - */ -struct mic_device_page { - struct mic_bootparam bootparam; - struct mic_device_desc desc[0]; -}; -/** - * struct mic_vqconfig: This is how we expect the device configuration field - * for a virtqueue to be laid out in config space. - * - * @address: Guest/MIC physical address of the virtio ring - * (avail and desc rings) - * @used_address: Guest/MIC physical address of the used ring - * @num: The number of entries in the virtio_ring - */ -struct mic_vqconfig { - __le64 address; - __le64 used_address; - __le16 num; -} __attribute__ ((aligned(8))); - -/* - * The alignment to use between consumer and producer parts of vring. - * This is pagesize for historical reasons. - */ -#define MIC_VIRTIO_RING_ALIGN 4096 - -#define MIC_MAX_VRINGS 4 -#define MIC_VRING_ENTRIES 128 - -/* - * Max vring entries (power of 2) to ensure desc and avail rings - * fit in a single page - */ -#define MIC_MAX_VRING_ENTRIES 128 - -/** - * Max size of the desc block in bytes: includes: - * - struct mic_device_desc - * - struct mic_vqconfig (num_vq of these) - * - host and guest features - * - virtio device config space - */ -#define MIC_MAX_DESC_BLK_SIZE 256 - -/** - * struct _mic_vring_info - Host vring info exposed to userspace backend - * for the avail index and magic for the card. - * - * @avail_idx: host avail idx - * @magic: A magic debug cookie. - */ -struct _mic_vring_info { - __u16 avail_idx; - __le32 magic; -}; - -/** - * struct mic_vring - Vring information. - * - * @vr: The virtio ring. - * @info: Host vring information exposed to the userspace backend for the - * avail index and magic for the card. - * @va: The va for the buffer allocated for vr and info. - * @len: The length of the buffer required for allocating vr and info. - */ -struct mic_vring { - struct vring vr; - struct _mic_vring_info *info; - void *va; - int len; -}; - -#define mic_aligned_desc_size(d) __mic_align(mic_desc_size(d), 8) - -#ifndef INTEL_MIC_CARD -static inline unsigned mic_desc_size(const struct mic_device_desc *desc) -{ - return sizeof(*desc) + desc->num_vq * sizeof(struct mic_vqconfig) - + desc->feature_len * 2 + desc->config_len; -} - -static inline struct mic_vqconfig * -mic_vq_config(const struct mic_device_desc *desc) -{ - return (struct mic_vqconfig *)(desc + 1); -} - -static inline __u8 *mic_vq_features(const struct mic_device_desc *desc) -{ - return (__u8 *)(mic_vq_config(desc) + desc->num_vq); -} - -static inline __u8 *mic_vq_configspace(const struct mic_device_desc *desc) -{ - return mic_vq_features(desc) + desc->feature_len * 2; -} -static inline unsigned mic_total_desc_size(struct mic_device_desc *desc) -{ - return mic_aligned_desc_size(desc) + sizeof(struct mic_device_ctrl); -} -#endif - -/* Device page size */ -#define MIC_DP_SIZE 4096 - -#define MIC_MAGIC 0xc0ffee00 - -/** - * enum mic_states - MIC states. - */ -enum mic_states { - MIC_READY = 0, - MIC_BOOTING, - MIC_ONLINE, - MIC_SHUTTING_DOWN, - MIC_RESETTING, - MIC_RESET_FAILED, - MIC_LAST -}; - -/** - * enum mic_status - MIC status reported by card after - * a host or card initiated shutdown or a card crash. - */ -enum mic_status { - MIC_NOP = 0, - MIC_CRASHED, - MIC_HALTED, - MIC_POWER_OFF, - MIC_RESTART, - MIC_STATUS_LAST -}; - -#endif diff --git a/include/uapi/linux/mic_ioctl.h b/include/uapi/linux/mic_ioctl.h deleted file mode 100644 index 687b9cd9d3e2..000000000000 --- a/include/uapi/linux/mic_ioctl.h +++ /dev/null @@ -1,77 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * The full GNU General Public License is included in this distribution in - * the file called "COPYING". - * - * Intel MIC Host driver. - * - */ -#ifndef _MIC_IOCTL_H_ -#define _MIC_IOCTL_H_ - -#include <linux/types.h> - -/* - * mic_copy - MIC virtio descriptor copy. - * - * @iov: An array of IOVEC structures containing user space buffers. - * @iovcnt: Number of IOVEC structures in iov. - * @vr_idx: The vring index. - * @update_used: A non zero value results in used index being updated. - * @out_len: The aggregate of the total length written to or read from - * the virtio device. - */ -struct mic_copy_desc { -#ifdef __KERNEL__ - struct iovec __user *iov; -#else - struct iovec *iov; -#endif - __u32 iovcnt; - __u8 vr_idx; - __u8 update_used; - __u32 out_len; -}; - -/* - * Add a new virtio device - * The (struct mic_device_desc *) pointer points to a device page entry - * for the virtio device consisting of: - * - struct mic_device_desc - * - struct mic_vqconfig (num_vq of these) - * - host and guest features - * - virtio device config space - * The total size referenced by the pointer should equal the size returned - * by desc_size() in mic_common.h - */ -#define MIC_VIRTIO_ADD_DEVICE _IOWR('s', 1, struct mic_device_desc *) - -/* - * Copy the number of entries in the iovec and update the used index - * if requested by the user. - */ -#define MIC_VIRTIO_COPY_DESC _IOWR('s', 2, struct mic_copy_desc *) - -/* - * Notify virtio device of a config change - * The (__u8 *) pointer points to config space values for the device - * as they should be written into the device page. The total size - * referenced by the pointer should equal the config_len field of struct - * mic_device_desc. - */ -#define MIC_VIRTIO_CONFIG_CHANGE _IOWR('s', 5, __u8 *) - -#endif diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h index 75232185324a..c998860d7bbc 100644 --- a/include/uapi/linux/vhost.h +++ b/include/uapi/linux/vhost.h @@ -146,4 +146,8 @@ /* Set event fd for config interrupt*/ #define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) + +/* Get the valid iova range */ +#define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \ + struct vhost_vdpa_iova_range) #endif diff --git a/include/uapi/linux/vhost_types.h b/include/uapi/linux/vhost_types.h index 9a269a88a6ff..f7f6a3a28977 100644 --- a/include/uapi/linux/vhost_types.h +++ b/include/uapi/linux/vhost_types.h @@ -138,6 +138,15 @@ struct vhost_vdpa_config { __u8 buf[0]; }; +/* vhost vdpa IOVA range + * @first: First address that can be mapped by vhost-vDPA + * @last: Last address that can be mapped by vhost-vDPA + */ +struct vhost_vdpa_iova_range { + __u64 first; + __u64 last; +}; + /* Feature bits */ /* Log all write descriptors. Can be changed while device is active. */ #define VHOST_F_LOG_ALL 26 diff --git a/include/uapi/sound/compress_offload.h b/include/uapi/sound/compress_offload.h index 7184265c0b0d..9555f31c8425 100644 --- a/include/uapi/sound/compress_offload.h +++ b/include/uapi/sound/compress_offload.h @@ -144,7 +144,7 @@ struct snd_compr_metadata { __u32 value[8]; } __attribute__((packed, aligned(4))); -/** +/* * compress path ioctl definitions * SNDRV_COMPRESS_GET_CAPS: Query capability of DSP * SNDRV_COMPRESS_GET_CODEC_CAPS: Query capability of a codec diff --git a/include/video/imx-ipu-v3.h b/include/video/imx-ipu-v3.h index 06b0b57e996c..d1b3889f74d8 100644 --- a/include/video/imx-ipu-v3.h +++ b/include/video/imx-ipu-v3.h @@ -484,9 +484,6 @@ int ipu_smfc_set_watermark(struct ipu_smfc *smfc, u32 set_level, u32 clr_level); enum ipu_color_space ipu_drm_fourcc_to_colorspace(u32 drm_fourcc); enum ipu_color_space ipu_pixelformat_to_colorspace(u32 pixelformat); -enum ipu_color_space ipu_mbus_code_to_colorspace(u32 mbus_code); -int ipu_stride_to_bytes(u32 pixel_stride, u32 pixelformat); -bool ipu_pixelformat_is_planar(u32 pixelformat); int ipu_degrees_to_rot_mode(enum ipu_rotate_mode *mode, int degrees, bool hflip, bool vflip); int ipu_rot_mode_to_degrees(int *degrees, enum ipu_rotate_mode mode, diff --git a/kernel/futex.c b/kernel/futex.c index be68ac0d49ad..f8614ef4ff31 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -1503,8 +1503,10 @@ static int wake_futex_pi(u32 __user *uaddr, u32 uval, struct futex_pi_state *pi_ */ newval = FUTEX_WAITERS | task_pid_vnr(new_owner); - if (unlikely(should_fail_futex(true))) + if (unlikely(should_fail_futex(true))) { ret = -EFAULT; + goto out_unlock; + } ret = cmpxchg_futex_value_locked(&curval, uaddr, uval, newval); if (!ret && (curval != uval)) { diff --git a/kernel/hung_task.c b/kernel/hung_task.c index ce76f490126c..396ebaebea3f 100644 --- a/kernel/hung_task.c +++ b/kernel/hung_task.c @@ -225,8 +225,7 @@ static long hung_timeout_jiffies(unsigned long last_checked, * Process updating of timeout sysctl */ int proc_dohung_task_timeout_secs(struct ctl_table *table, int write, - void __user *buffer, - size_t *lenp, loff_t *ppos) + void *buffer, size_t *lenp, loff_t *ppos) { int ret; diff --git a/kernel/kprobes.c b/kernel/kprobes.c index 8a12a25fa40d..41fdbb7953c6 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -1249,7 +1249,13 @@ __acquires(hlist_lock) *head = &kretprobe_inst_table[hash]; hlist_lock = kretprobe_table_lock_ptr(hash); - raw_spin_lock_irqsave(hlist_lock, *flags); + /* + * Nested is a workaround that will soon not be needed. + * There's other protections that make sure the same lock + * is not taken on the same CPU that lockdep is unaware of. + * Differentiate when it is taken in NMI context. + */ + raw_spin_lock_irqsave_nested(hlist_lock, *flags, !!in_nmi()); } NOKPROBE_SYMBOL(kretprobe_hash_lock); @@ -1258,7 +1264,13 @@ static void kretprobe_table_lock(unsigned long hash, __acquires(hlist_lock) { raw_spinlock_t *hlist_lock = kretprobe_table_lock_ptr(hash); - raw_spin_lock_irqsave(hlist_lock, *flags); + /* + * Nested is a workaround that will soon not be needed. + * There's other protections that make sure the same lock + * is not taken on the same CPU that lockdep is unaware of. + * Differentiate when it is taken in NMI context. + */ + raw_spin_lock_irqsave_nested(hlist_lock, *flags, !!in_nmi()); } NOKPROBE_SYMBOL(kretprobe_table_lock); @@ -2028,7 +2040,12 @@ static int pre_handler_kretprobe(struct kprobe *p, struct pt_regs *regs) /* TODO: consider to only swap the RA after the last pre_handler fired */ hash = hash_ptr(current, KPROBE_HASH_BITS); - raw_spin_lock_irqsave(&rp->lock, flags); + /* + * Nested is a workaround that will soon not be needed. + * There's other protections that make sure the same lock + * is not taken on the same CPU that lockdep is unaware of. + */ + raw_spin_lock_irqsave_nested(&rp->lock, flags, 1); if (!hlist_empty(&rp->free_instances)) { ri = hlist_entry(rp->free_instances.first, struct kretprobe_instance, hlist); @@ -2039,7 +2056,7 @@ static int pre_handler_kretprobe(struct kprobe *p, struct pt_regs *regs) ri->task = current; if (rp->entry_handler && rp->entry_handler(ri, regs)) { - raw_spin_lock_irqsave(&rp->lock, flags); + raw_spin_lock_irqsave_nested(&rp->lock, flags, 1); hlist_add_head(&ri->hlist, &rp->free_instances); raw_spin_unlock_irqrestore(&rp->lock, flags); return 0; diff --git a/kernel/kthread.c b/kernel/kthread.c index e29773c82b70..933a625621b8 100644 --- a/kernel/kthread.c +++ b/kernel/kthread.c @@ -897,7 +897,8 @@ void kthread_delayed_work_timer_fn(struct timer_list *t) /* Move the work from worker->delayed_work_list. */ WARN_ON_ONCE(list_empty(&work->node)); list_del_init(&work->node); - kthread_insert_work(worker, work, &worker->work_list); + if (!work->canceling) + kthread_insert_work(worker, work, &worker->work_list); raw_spin_unlock_irqrestore(&worker->lock, flags); } diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c index 3e99dfef8408..b71ad8d9f1c9 100644 --- a/kernel/locking/lockdep.c +++ b/kernel/locking/lockdep.c @@ -84,7 +84,7 @@ static inline bool lockdep_enabled(void) if (!debug_locks) return false; - if (raw_cpu_read(lockdep_recursion)) + if (this_cpu_read(lockdep_recursion)) return false; if (current->lockdep_recursion) @@ -4057,7 +4057,7 @@ void lockdep_hardirqs_on_prepare(unsigned long ip) if (unlikely(in_nmi())) return; - if (unlikely(__this_cpu_read(lockdep_recursion))) + if (unlikely(this_cpu_read(lockdep_recursion))) return; if (unlikely(lockdep_hardirqs_enabled())) { @@ -4126,7 +4126,7 @@ void noinstr lockdep_hardirqs_on(unsigned long ip) goto skip_checks; } - if (unlikely(__this_cpu_read(lockdep_recursion))) + if (unlikely(this_cpu_read(lockdep_recursion))) return; if (lockdep_hardirqs_enabled()) { @@ -4396,6 +4396,9 @@ static int mark_lock(struct task_struct *curr, struct held_lock *this, if (unlikely(hlock_class(this)->usage_mask & new_mask)) goto unlock; + if (!hlock_class(this)->usage_mask) + debug_atomic_dec(nr_unused_locks); + hlock_class(this)->usage_mask |= new_mask; if (new_bit < LOCK_TRACE_STATES) { @@ -4403,19 +4406,10 @@ static int mark_lock(struct task_struct *curr, struct held_lock *this, return 0; } - switch (new_bit) { - case 0 ... LOCK_USED-1: + if (new_bit < LOCK_USED) { ret = mark_lock_irq(curr, this, new_bit); if (!ret) return 0; - break; - - case LOCK_USED: - debug_atomic_dec(nr_unused_locks); - break; - - default: - break; } unlock: diff --git a/kernel/params.c b/kernel/params.c index 3835fb82c64b..164d79330849 100644 --- a/kernel/params.c +++ b/kernel/params.c @@ -530,7 +530,7 @@ struct module_param_attrs { unsigned int num; struct attribute_group grp; - struct param_attribute attrs[0]; + struct param_attribute attrs[]; }; #ifdef CONFIG_SYSFS diff --git a/kernel/power/process.c b/kernel/power/process.c index 4b6a54da7e65..45b054b7b5ec 100644 --- a/kernel/power/process.c +++ b/kernel/power/process.c @@ -146,7 +146,7 @@ int freeze_processes(void) BUG_ON(in_atomic()); /* - * Now that the whole userspace is frozen we need to disbale + * Now that the whole userspace is frozen we need to disable * the OOM killer to disallow any further interference with * killable tasks. There is no guarantee oom victims will * ever reach a point they go away we have to wait with a timeout. diff --git a/kernel/printk/printk_ringbuffer.c b/kernel/printk/printk_ringbuffer.c index 24a960a89aa8..6b1525685277 100644 --- a/kernel/printk/printk_ringbuffer.c +++ b/kernel/printk/printk_ringbuffer.c @@ -345,7 +345,7 @@ DESC_ID((id) - DESCS_COUNT(desc_ring)) */ struct prb_data_block { unsigned long id; - char data[0]; + char data[]; }; /* diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c index 06895ef85d69..2a52f42f64b6 100644 --- a/kernel/rcu/tree.c +++ b/kernel/rcu/tree.c @@ -409,7 +409,7 @@ bool rcu_eqs_special_set(int cpu) * * The caller must have disabled interrupts and must not be idle. */ -void rcu_momentary_dyntick_idle(void) +notrace void rcu_momentary_dyntick_idle(void) { int special; diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c index e254745a82cb..d73bccde2720 100644 --- a/kernel/sched/cpufreq_schedutil.c +++ b/kernel/sched/cpufreq_schedutil.c @@ -102,8 +102,12 @@ static bool sugov_should_update_freq(struct sugov_policy *sg_policy, u64 time) static bool sugov_update_next_freq(struct sugov_policy *sg_policy, u64 time, unsigned int next_freq) { - if (sg_policy->next_freq == next_freq) - return false; + if (!sg_policy->need_freq_update) { + if (sg_policy->next_freq == next_freq) + return false; + } else { + sg_policy->need_freq_update = cpufreq_driver_test_flags(CPUFREQ_NEED_UPDATE_LIMITS); + } sg_policy->next_freq = next_freq; sg_policy->last_freq_update_time = time; @@ -164,7 +168,6 @@ static unsigned int get_next_freq(struct sugov_policy *sg_policy, if (freq == sg_policy->cached_raw_freq && !sg_policy->need_freq_update) return sg_policy->next_freq; - sg_policy->need_freq_update = false; sg_policy->cached_raw_freq = freq; return cpufreq_driver_resolve_freq(policy, freq); } @@ -440,7 +443,6 @@ static void sugov_update_single(struct update_util_data *hook, u64 time, struct sugov_policy *sg_policy = sg_cpu->sg_policy; unsigned long util, max; unsigned int next_f; - bool busy; unsigned int cached_freq = sg_policy->cached_raw_freq; sugov_iowait_boost(sg_cpu, time, flags); @@ -451,9 +453,6 @@ static void sugov_update_single(struct update_util_data *hook, u64 time, if (!sugov_should_update_freq(sg_policy, time)) return; - /* Limits may have changed, don't skip frequency update */ - busy = !sg_policy->need_freq_update && sugov_cpu_is_busy(sg_cpu); - util = sugov_get_util(sg_cpu); max = sg_cpu->max; util = sugov_iowait_apply(sg_cpu, time, util, max); @@ -462,7 +461,7 @@ static void sugov_update_single(struct update_util_data *hook, u64 time, * Do not reduce the frequency if the CPU has not been idle * recently, as the reduction is likely to be premature then. */ - if (busy && next_f < sg_policy->next_freq) { + if (sugov_cpu_is_busy(sg_cpu) && next_f < sg_policy->next_freq) { next_f = sg_policy->next_freq; /* Restore cached freq as next_freq has changed */ @@ -827,9 +826,10 @@ static int sugov_start(struct cpufreq_policy *policy) sg_policy->next_freq = 0; sg_policy->work_in_progress = false; sg_policy->limits_changed = false; - sg_policy->need_freq_update = false; sg_policy->cached_raw_freq = 0; + sg_policy->need_freq_update = cpufreq_driver_test_flags(CPUFREQ_NEED_UPDATE_LIMITS); + for_each_cpu(cpu, policy->cpus) { struct sugov_cpu *sg_cpu = &per_cpu(sugov_cpu, cpu); diff --git a/kernel/signal.c b/kernel/signal.c index a38b3edc6851..ef8f2a28d37c 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -391,16 +391,17 @@ static bool task_participate_group_stop(struct task_struct *task) void task_join_group_stop(struct task_struct *task) { + unsigned long mask = current->jobctl & JOBCTL_STOP_SIGMASK; + struct signal_struct *sig = current->signal; + + if (sig->group_stop_count) { + sig->group_stop_count++; + mask |= JOBCTL_STOP_CONSUME; + } else if (!(sig->flags & SIGNAL_STOP_STOPPED)) + return; + /* Have the new thread join an on-going signal group stop */ - unsigned long jobctl = current->jobctl; - if (jobctl & JOBCTL_STOP_PENDING) { - struct signal_struct *sig = current->signal; - unsigned long signr = jobctl & JOBCTL_STOP_SIGMASK; - unsigned long gstop = JOBCTL_STOP_PENDING | JOBCTL_STOP_CONSUME; - if (task_set_jobctl_pending(task, signr | gstop)) { - sig->group_stop_count++; - } - } + task_set_jobctl_pending(task, mask | JOBCTL_STOP_PENDING); } /* diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c index 865bb0228ab6..890b79cf0e7c 100644 --- a/kernel/stop_machine.c +++ b/kernel/stop_machine.c @@ -178,7 +178,7 @@ static void ack_state(struct multi_stop_data *msdata) set_state(msdata, msdata->state + 1); } -void __weak stop_machine_yield(const struct cpumask *cpumask) +notrace void __weak stop_machine_yield(const struct cpumask *cpumask) { cpu_relax(); } diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c index 3624b9b5835d..387b4bef7dd1 100644 --- a/kernel/time/hrtimer.c +++ b/kernel/time/hrtimer.c @@ -425,11 +425,6 @@ static inline void debug_hrtimer_deactivate(struct hrtimer *timer) debug_object_deactivate(timer, &hrtimer_debug_descr); } -static inline void debug_hrtimer_free(struct hrtimer *timer) -{ - debug_object_free(timer, &hrtimer_debug_descr); -} - static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id, enum hrtimer_mode mode); diff --git a/kernel/time/itimer.c b/kernel/time/itimer.c index ca4e6d57d68b..00629e658ca1 100644 --- a/kernel/time/itimer.c +++ b/kernel/time/itimer.c @@ -172,10 +172,6 @@ static void set_cpu_itimer(struct task_struct *tsk, unsigned int clock_id, u64 oval, nval, ointerval, ninterval; struct cpu_itimer *it = &tsk->signal->it[clock_id]; - /* - * Use the to_ktime conversion because that clamps the maximum - * value to KTIME_MAX and avoid multiplication overflows. - */ nval = timespec64_to_ns(&value->it_value); ninterval = timespec64_to_ns(&value->it_interval); diff --git a/kernel/time/sched_clock.c b/kernel/time/sched_clock.c index 0642013dace4..b1b9b12899f5 100644 --- a/kernel/time/sched_clock.c +++ b/kernel/time/sched_clock.c @@ -68,13 +68,13 @@ static inline u64 notrace cyc_to_ns(u64 cyc, u32 mult, u32 shift) return (cyc * mult) >> shift; } -struct clock_read_data *sched_clock_read_begin(unsigned int *seq) +notrace struct clock_read_data *sched_clock_read_begin(unsigned int *seq) { *seq = raw_read_seqcount_latch(&cd.seq); return cd.read_data + (*seq & 1); } -int sched_clock_read_retry(unsigned int seq) +notrace int sched_clock_read_retry(unsigned int seq) { return read_seqcount_latch_retry(&cd.seq, seq); } diff --git a/kernel/time/timer.c b/kernel/time/timer.c index de37e33a868d..c3ad64fb9d8b 100644 --- a/kernel/time/timer.c +++ b/kernel/time/timer.c @@ -732,11 +732,6 @@ static inline void debug_timer_deactivate(struct timer_list *timer) debug_object_deactivate(timer, &timer_debug_descr); } -static inline void debug_timer_free(struct timer_list *timer) -{ - debug_object_free(timer, &timer_debug_descr); -} - static inline void debug_timer_assert_init(struct timer_list *timer) { debug_object_assert_init(timer, &timer_debug_descr); diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 7f45fd9d5a45..dc83b3fa9fe7 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -438,14 +438,16 @@ enum { }; /* * Used for which event context the event is in. - * NMI = 0 - * IRQ = 1 - * SOFTIRQ = 2 - * NORMAL = 3 + * TRANSITION = 0 + * NMI = 1 + * IRQ = 2 + * SOFTIRQ = 3 + * NORMAL = 4 * * See trace_recursive_lock() comment below for more details. */ enum { + RB_CTX_TRANSITION, RB_CTX_NMI, RB_CTX_IRQ, RB_CTX_SOFTIRQ, @@ -3014,10 +3016,10 @@ rb_wakeups(struct trace_buffer *buffer, struct ring_buffer_per_cpu *cpu_buffer) * a bit of overhead in something as critical as function tracing, * we use a bitmask trick. * - * bit 0 = NMI context - * bit 1 = IRQ context - * bit 2 = SoftIRQ context - * bit 3 = normal context. + * bit 1 = NMI context + * bit 2 = IRQ context + * bit 3 = SoftIRQ context + * bit 4 = normal context. * * This works because this is the order of contexts that can * preempt other contexts. A SoftIRQ never preempts an IRQ @@ -3040,6 +3042,30 @@ rb_wakeups(struct trace_buffer *buffer, struct ring_buffer_per_cpu *cpu_buffer) * The least significant bit can be cleared this way, and it * just so happens that it is the same bit corresponding to * the current context. + * + * Now the TRANSITION bit breaks the above slightly. The TRANSITION bit + * is set when a recursion is detected at the current context, and if + * the TRANSITION bit is already set, it will fail the recursion. + * This is needed because there's a lag between the changing of + * interrupt context and updating the preempt count. In this case, + * a false positive will be found. To handle this, one extra recursion + * is allowed, and this is done by the TRANSITION bit. If the TRANSITION + * bit is already set, then it is considered a recursion and the function + * ends. Otherwise, the TRANSITION bit is set, and that bit is returned. + * + * On the trace_recursive_unlock(), the TRANSITION bit will be the first + * to be cleared. Even if it wasn't the context that set it. That is, + * if an interrupt comes in while NORMAL bit is set and the ring buffer + * is called before preempt_count() is updated, since the check will + * be on the NORMAL bit, the TRANSITION bit will then be set. If an + * NMI then comes in, it will set the NMI bit, but when the NMI code + * does the trace_recursive_unlock() it will clear the TRANSTION bit + * and leave the NMI bit set. But this is fine, because the interrupt + * code that set the TRANSITION bit will then clear the NMI bit when it + * calls trace_recursive_unlock(). If another NMI comes in, it will + * set the TRANSITION bit and continue. + * + * Note: The TRANSITION bit only handles a single transition between context. */ static __always_inline int @@ -3055,8 +3081,16 @@ trace_recursive_lock(struct ring_buffer_per_cpu *cpu_buffer) bit = pc & NMI_MASK ? RB_CTX_NMI : pc & HARDIRQ_MASK ? RB_CTX_IRQ : RB_CTX_SOFTIRQ; - if (unlikely(val & (1 << (bit + cpu_buffer->nest)))) - return 1; + if (unlikely(val & (1 << (bit + cpu_buffer->nest)))) { + /* + * It is possible that this was called by transitioning + * between interrupt context, and preempt_count() has not + * been updated yet. In this case, use the TRANSITION bit. + */ + bit = RB_CTX_TRANSITION; + if (val & (1 << (bit + cpu_buffer->nest))) + return 1; + } val |= (1 << (bit + cpu_buffer->nest)); cpu_buffer->current_context = val; @@ -3071,8 +3105,8 @@ trace_recursive_unlock(struct ring_buffer_per_cpu *cpu_buffer) cpu_buffer->current_context - (1 << cpu_buffer->nest); } -/* The recursive locking above uses 4 bits */ -#define NESTED_BITS 4 +/* The recursive locking above uses 5 bits */ +#define NESTED_BITS 5 /** * ring_buffer_nest_start - Allow to trace while nested diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 528971714fc6..410cfeb16db5 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2750,7 +2750,7 @@ trace_event_buffer_lock_reserve(struct trace_buffer **current_rb, /* * If tracing is off, but we have triggers enabled * we still need to look at the event data. Use the temp_buffer - * to store the trace event for the tigger to use. It's recusive + * to store the trace event for the trigger to use. It's recursive * safe and will not be recorded anywhere. */ if (!entry && trace_file->flags & EVENT_FILE_FL_TRIGGER_COND) { @@ -2952,7 +2952,7 @@ static void __ftrace_trace_stack(struct trace_buffer *buffer, stackidx = __this_cpu_inc_return(ftrace_stack_reserve) - 1; /* This should never happen. If it does, yell once and skip */ - if (WARN_ON_ONCE(stackidx > FTRACE_KSTACK_NESTING)) + if (WARN_ON_ONCE(stackidx >= FTRACE_KSTACK_NESTING)) goto out; /* @@ -3132,7 +3132,7 @@ static char *get_trace_buf(void) /* Interrupts must see nesting incremented before we use the buffer */ barrier(); - return &buffer->buffer[buffer->nesting][0]; + return &buffer->buffer[buffer->nesting - 1][0]; } static void put_trace_buf(void) diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index f3f5e77123ad..1dadef445cd1 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -637,6 +637,12 @@ enum { * function is called to clear it. */ TRACE_GRAPH_NOTRACE_BIT, + + /* + * When transitioning between context, the preempt_count() may + * not be correct. Allow for a single recursion to cover this case. + */ + TRACE_TRANSITION_BIT, }; #define trace_recursion_set(bit) do { (current)->trace_recursion |= (1<<(bit)); } while (0) @@ -691,14 +697,27 @@ static __always_inline int trace_test_and_set_recursion(int start, int max) return 0; bit = trace_get_context_bit() + start; - if (unlikely(val & (1 << bit))) - return -1; + if (unlikely(val & (1 << bit))) { + /* + * It could be that preempt_count has not been updated during + * a switch between contexts. Allow for a single recursion. + */ + bit = TRACE_TRANSITION_BIT; + if (trace_recursion_test(bit)) + return -1; + trace_recursion_set(bit); + barrier(); + return bit + 1; + } + + /* Normal check passed, clear the transition to allow it again */ + trace_recursion_clear(TRACE_TRANSITION_BIT); val |= 1 << bit; current->trace_recursion = val; barrier(); - return bit; + return bit + 1; } static __always_inline void trace_clear_recursion(int bit) @@ -708,6 +727,7 @@ static __always_inline void trace_clear_recursion(int bit) if (!bit) return; + bit--; bit = 1 << bit; val &= ~bit; diff --git a/kernel/trace/trace_events_synth.c b/kernel/trace/trace_events_synth.c index 3212e2c653b3..881df991742a 100644 --- a/kernel/trace/trace_events_synth.c +++ b/kernel/trace/trace_events_synth.c @@ -584,7 +584,8 @@ static struct synth_field *parse_synth_field(int argc, const char **argv, { struct synth_field *field; const char *prefix = NULL, *field_type = argv[0], *field_name, *array; - int len, ret = 0; + int len, ret = -ENOMEM; + struct seq_buf s; ssize_t size; if (field_type[0] == ';') @@ -616,10 +617,9 @@ static struct synth_field *parse_synth_field(int argc, const char **argv, len--; field->name = kmemdup_nul(field_name, len, GFP_KERNEL); - if (!field->name) { - ret = -ENOMEM; + if (!field->name) goto free; - } + if (!is_good_name(field->name)) { synth_err(SYNTH_ERR_BAD_NAME, errpos(field_name)); ret = -EINVAL; @@ -630,29 +630,29 @@ static struct synth_field *parse_synth_field(int argc, const char **argv, field_type++; len = strlen(field_type) + 1; - if (array) { - int l = strlen(array); + if (array) + len += strlen(array); - if (l && array[l - 1] == ';') - l--; - len += l; - } if (prefix) len += strlen(prefix); field->type = kzalloc(len, GFP_KERNEL); - if (!field->type) { - ret = -ENOMEM; + if (!field->type) goto free; - } + + seq_buf_init(&s, field->type, len); if (prefix) - strcat(field->type, prefix); - strcat(field->type, field_type); + seq_buf_puts(&s, prefix); + seq_buf_puts(&s, field_type); if (array) { - strcat(field->type, array); - if (field->type[len - 1] == ';') - field->type[len - 1] = '\0'; + seq_buf_puts(&s, array); + if (s.buffer[s.len - 1] == ';') + s.len--; } + if (WARN_ON_ONCE(!seq_buf_buffer_left(&s))) + goto free; + + s.buffer[s.len] = '\0'; size = synth_field_size(field->type); if (size < 0) { @@ -663,14 +663,19 @@ static struct synth_field *parse_synth_field(int argc, const char **argv, if (synth_field_is_string(field->type)) { char *type; - type = kzalloc(sizeof("__data_loc ") + strlen(field->type) + 1, GFP_KERNEL); - if (!type) { - ret = -ENOMEM; + len = sizeof("__data_loc ") + strlen(field->type) + 1; + type = kzalloc(len, GFP_KERNEL); + if (!type) goto free; - } - strcat(type, "__data_loc "); - strcat(type, field->type); + seq_buf_init(&s, type, len); + seq_buf_puts(&s, "__data_loc "); + seq_buf_puts(&s, field->type); + + if (WARN_ON_ONCE(!seq_buf_buffer_left(&s))) + goto free; + s.buffer[s.len] = '\0'; + kfree(field->type); field->type = type; diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index b5e3496cf803..4738ad48a667 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -492,8 +492,13 @@ trace_selftest_function_recursion(void) unregister_ftrace_function(&test_rec_probe); ret = -1; - if (trace_selftest_recursion_cnt != 1) { - pr_cont("*callback not called once (%d)* ", + /* + * Recursion allows for transitions between context, + * and may call the callback twice. + */ + if (trace_selftest_recursion_cnt != 1 && + trace_selftest_recursion_cnt != 2) { + pr_cont("*callback not called once (or twice) (%d)* ", trace_selftest_recursion_cnt); goto out; } diff --git a/kernel/tracepoint.c b/kernel/tracepoint.c index 26efd22f0633..3f659f855074 100644 --- a/kernel/tracepoint.c +++ b/kernel/tracepoint.c @@ -50,7 +50,7 @@ static bool ok_to_free_tracepoints; */ struct tp_probes { struct rcu_head rcu; - struct tracepoint_func probes[0]; + struct tracepoint_func probes[]; }; static inline void *allocate_probes(int count) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index d7a7bc3b6098..c789b39ed527 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -2446,4 +2446,6 @@ config HYPERV_TESTING endmenu # "Kernel Testing and Coverage" +source "Documentation/Kconfig" + endmenu # Kernel hacking diff --git a/lib/crc32test.c b/lib/crc32test.c index 97d6a57cefcc..61ddce2cff77 100644 --- a/lib/crc32test.c +++ b/lib/crc32test.c @@ -683,7 +683,6 @@ static int __init crc32c_test(void) /* reduce OS noise */ local_irq_save(flags); - local_irq_disable(); nsec = ktime_get_ns(); for (i = 0; i < 100; i++) { @@ -694,7 +693,6 @@ static int __init crc32c_test(void) nsec = ktime_get_ns() - nsec; local_irq_restore(flags); - local_irq_enable(); pr_info("crc32c: CRC_LE_BITS = %d\n", CRC_LE_BITS); @@ -768,7 +766,6 @@ static int __init crc32_test(void) /* reduce OS noise */ local_irq_save(flags); - local_irq_disable(); nsec = ktime_get_ns(); for (i = 0; i < 100; i++) { @@ -783,7 +780,6 @@ static int __init crc32_test(void) nsec = ktime_get_ns() - nsec; local_irq_restore(flags); - local_irq_enable(); pr_info("crc32: CRC_LE_BITS = %d, CRC_BE BITS = %d\n", CRC_LE_BITS, CRC_BE_BITS); diff --git a/lib/fonts/font_10x18.c b/lib/fonts/font_10x18.c index 0e2deac97da0..e02f9df24d1e 100644 --- a/lib/fonts/font_10x18.c +++ b/lib/fonts/font_10x18.c @@ -8,7 +8,7 @@ #define FONTDATAMAX 9216 -static struct font_data fontdata_10x18 = { +static const struct font_data fontdata_10x18 = { { 0, 0, FONTDATAMAX, 0 }, { /* 0 0x00 '^@' */ 0x00, 0x00, /* 0000000000 */ diff --git a/lib/fonts/font_6x10.c b/lib/fonts/font_6x10.c index 87da8acd07db..6e3c4b7691c8 100644 --- a/lib/fonts/font_6x10.c +++ b/lib/fonts/font_6x10.c @@ -3,7 +3,7 @@ #define FONTDATAMAX 2560 -static struct font_data fontdata_6x10 = { +static const struct font_data fontdata_6x10 = { { 0, 0, FONTDATAMAX, 0 }, { /* 0 0x00 '^@' */ 0x00, /* 00000000 */ diff --git a/lib/fonts/font_6x11.c b/lib/fonts/font_6x11.c index 5e975dfa10a5..2d22a24e816f 100644 --- a/lib/fonts/font_6x11.c +++ b/lib/fonts/font_6x11.c @@ -9,7 +9,7 @@ #define FONTDATAMAX (11*256) -static struct font_data fontdata_6x11 = { +static const struct font_data fontdata_6x11 = { { 0, 0, FONTDATAMAX, 0 }, { /* 0 0x00 '^@' */ 0x00, /* 00000000 */ diff --git a/lib/fonts/font_6x8.c b/lib/fonts/font_6x8.c index 700039a9ceae..e7442a0d183d 100644 --- a/lib/fonts/font_6x8.c +++ b/lib/fonts/font_6x8.c @@ -3,7 +3,7 @@ #define FONTDATAMAX 2048 -static struct font_data fontdata_6x8 = { +static const struct font_data fontdata_6x8 = { { 0, 0, FONTDATAMAX, 0 }, { /* 0 0x00 '^@' */ 0x00, /* 000000 */ diff --git a/lib/fonts/font_7x14.c b/lib/fonts/font_7x14.c index 86d298f38505..9cc7ae2e03f7 100644 --- a/lib/fonts/font_7x14.c +++ b/lib/fonts/font_7x14.c @@ -8,7 +8,7 @@ #define FONTDATAMAX 3584 -static struct font_data fontdata_7x14 = { +static const struct font_data fontdata_7x14 = { { 0, 0, FONTDATAMAX, 0 }, { /* 0 0x00 '^@' */ 0x00, /* 0000000 */ diff --git a/lib/fonts/font_8x16.c b/lib/fonts/font_8x16.c index 37cedd36ca5e..bab25dc59e8d 100644 --- a/lib/fonts/font_8x16.c +++ b/lib/fonts/font_8x16.c @@ -10,7 +10,7 @@ #define FONTDATAMAX 4096 -static struct font_data fontdata_8x16 = { +static const struct font_data fontdata_8x16 = { { 0, 0, FONTDATAMAX, 0 }, { /* 0 0x00 '^@' */ 0x00, /* 00000000 */ diff --git a/lib/fonts/font_8x8.c b/lib/fonts/font_8x8.c index 8ab695538395..109d0572368f 100644 --- a/lib/fonts/font_8x8.c +++ b/lib/fonts/font_8x8.c @@ -9,7 +9,7 @@ #define FONTDATAMAX 2048 -static struct font_data fontdata_8x8 = { +static const struct font_data fontdata_8x8 = { { 0, 0, FONTDATAMAX, 0 }, { /* 0 0x00 '^@' */ 0x00, /* 00000000 */ diff --git a/lib/fonts/font_acorn_8x8.c b/lib/fonts/font_acorn_8x8.c index 069b3e80c434..fb395f0d4031 100644 --- a/lib/fonts/font_acorn_8x8.c +++ b/lib/fonts/font_acorn_8x8.c @@ -5,7 +5,7 @@ #define FONTDATAMAX 2048 -static struct font_data acorndata_8x8 = { +static const struct font_data acorndata_8x8 = { { 0, 0, FONTDATAMAX, 0 }, { /* 00 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^@ */ /* 01 */ 0x7e, 0x81, 0xa5, 0x81, 0xbd, 0x99, 0x81, 0x7e, /* ^A */ diff --git a/lib/fonts/font_mini_4x6.c b/lib/fonts/font_mini_4x6.c index 1449876c6a27..592774a90917 100644 --- a/lib/fonts/font_mini_4x6.c +++ b/lib/fonts/font_mini_4x6.c @@ -43,7 +43,7 @@ __END__; #define FONTDATAMAX 1536 -static struct font_data fontdata_mini_4x6 = { +static const struct font_data fontdata_mini_4x6 = { { 0, 0, FONTDATAMAX, 0 }, { /*{*/ /* Char 0: ' ' */ diff --git a/lib/fonts/font_pearl_8x8.c b/lib/fonts/font_pearl_8x8.c index 32d65551e7ed..a6f95ebce950 100644 --- a/lib/fonts/font_pearl_8x8.c +++ b/lib/fonts/font_pearl_8x8.c @@ -14,7 +14,7 @@ #define FONTDATAMAX 2048 -static struct font_data fontdata_pearl8x8 = { +static const struct font_data fontdata_pearl8x8 = { { 0, 0, FONTDATAMAX, 0 }, { /* 0 0x00 '^@' */ 0x00, /* 00000000 */ diff --git a/lib/fonts/font_sun12x22.c b/lib/fonts/font_sun12x22.c index 641a6b4dca42..a5b65bd49604 100644 --- a/lib/fonts/font_sun12x22.c +++ b/lib/fonts/font_sun12x22.c @@ -3,7 +3,7 @@ #define FONTDATAMAX 11264 -static struct font_data fontdata_sun12x22 = { +static const struct font_data fontdata_sun12x22 = { { 0, 0, FONTDATAMAX, 0 }, { /* 0 0x00 '^@' */ 0x00, 0x00, /* 000000000000 */ diff --git a/lib/fonts/font_sun8x16.c b/lib/fonts/font_sun8x16.c index 193fe6d988e0..e577e76a6a7c 100644 --- a/lib/fonts/font_sun8x16.c +++ b/lib/fonts/font_sun8x16.c @@ -3,7 +3,7 @@ #define FONTDATAMAX 4096 -static struct font_data fontdata_sun8x16 = { +static const struct font_data fontdata_sun8x16 = { { 0, 0, FONTDATAMAX, 0 }, { /* */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* */ 0x00,0x00,0x7e,0x81,0xa5,0x81,0x81,0xbd,0x99,0x81,0x81,0x7e,0x00,0x00,0x00,0x00, diff --git a/lib/fonts/font_ter16x32.c b/lib/fonts/font_ter16x32.c index 91b9c283bd9c..f7c3abb6b99e 100644 --- a/lib/fonts/font_ter16x32.c +++ b/lib/fonts/font_ter16x32.c @@ -4,7 +4,7 @@ #define FONTDATAMAX 16384 -static struct font_data fontdata_ter16x32 = { +static const struct font_data fontdata_ter16x32 = { { 0, 0, FONTDATAMAX, 0 }, { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x7f, 0xfc, diff --git a/lib/scatterlist.c b/lib/scatterlist.c index 0a482ef988e5..a59778946404 100644 --- a/lib/scatterlist.c +++ b/lib/scatterlist.c @@ -933,7 +933,7 @@ size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents, void *buf, sg_miter_start(&miter, sgl, nents, sg_flags); if (!sg_miter_skip(&miter, skip)) - return false; + return 0; while ((offset < buflen) && sg_miter_next(&miter)) { unsigned int len; diff --git a/lib/test_kasan.c b/lib/test_kasan.c index 63c26171a791..662f862702fc 100644 --- a/lib/test_kasan.c +++ b/lib/test_kasan.c @@ -216,6 +216,12 @@ static void kmalloc_oob_16(struct kunit *test) u64 words[2]; } *ptr1, *ptr2; + /* This test is specifically crafted for the generic mode. */ + if (!IS_ENABLED(CONFIG_KASAN_GENERIC)) { + kunit_info(test, "CONFIG_KASAN_GENERIC required\n"); + return; + } + ptr1 = kmalloc(sizeof(*ptr1) - 3, GFP_KERNEL); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ptr1); @@ -227,6 +233,23 @@ static void kmalloc_oob_16(struct kunit *test) kfree(ptr2); } +static void kmalloc_uaf_16(struct kunit *test) +{ + struct { + u64 words[2]; + } *ptr1, *ptr2; + + ptr1 = kmalloc(sizeof(*ptr1), GFP_KERNEL); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ptr1); + + ptr2 = kmalloc(sizeof(*ptr2), GFP_KERNEL); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ptr2); + kfree(ptr2); + + KUNIT_EXPECT_KASAN_FAIL(test, *ptr1 = *ptr2); + kfree(ptr1); +} + static void kmalloc_oob_memset_2(struct kunit *test) { char *ptr; @@ -429,6 +452,12 @@ static void kasan_global_oob(struct kunit *test) volatile int i = 3; char *p = &global_array[ARRAY_SIZE(global_array) + i]; + /* Only generic mode instruments globals. */ + if (!IS_ENABLED(CONFIG_KASAN_GENERIC)) { + kunit_info(test, "CONFIG_KASAN_GENERIC required"); + return; + } + KUNIT_EXPECT_KASAN_FAIL(test, *(volatile char *)p); } @@ -467,6 +496,12 @@ static void kasan_alloca_oob_left(struct kunit *test) char alloca_array[i]; char *p = alloca_array - 1; + /* Only generic mode instruments dynamic allocas. */ + if (!IS_ENABLED(CONFIG_KASAN_GENERIC)) { + kunit_info(test, "CONFIG_KASAN_GENERIC required"); + return; + } + if (!IS_ENABLED(CONFIG_KASAN_STACK)) { kunit_info(test, "CONFIG_KASAN_STACK is not enabled"); return; @@ -481,6 +516,12 @@ static void kasan_alloca_oob_right(struct kunit *test) char alloca_array[i]; char *p = alloca_array + i; + /* Only generic mode instruments dynamic allocas. */ + if (!IS_ENABLED(CONFIG_KASAN_GENERIC)) { + kunit_info(test, "CONFIG_KASAN_GENERIC required"); + return; + } + if (!IS_ENABLED(CONFIG_KASAN_STACK)) { kunit_info(test, "CONFIG_KASAN_STACK is not enabled"); return; @@ -551,6 +592,9 @@ static void kasan_memchr(struct kunit *test) return; } + if (OOB_TAG_OFF) + size = round_up(size, OOB_TAG_OFF); + ptr = kmalloc(size, GFP_KERNEL | __GFP_ZERO); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ptr); @@ -573,6 +617,9 @@ static void kasan_memcmp(struct kunit *test) return; } + if (OOB_TAG_OFF) + size = round_up(size, OOB_TAG_OFF); + ptr = kmalloc(size, GFP_KERNEL | __GFP_ZERO); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ptr); memset(arr, 0, sizeof(arr)); @@ -619,13 +666,50 @@ static void kasan_strings(struct kunit *test) KUNIT_EXPECT_KASAN_FAIL(test, kasan_int_result = strnlen(ptr, 1)); } -static void kasan_bitops(struct kunit *test) +static void kasan_bitops_modify(struct kunit *test, int nr, void *addr) +{ + KUNIT_EXPECT_KASAN_FAIL(test, set_bit(nr, addr)); + KUNIT_EXPECT_KASAN_FAIL(test, __set_bit(nr, addr)); + KUNIT_EXPECT_KASAN_FAIL(test, clear_bit(nr, addr)); + KUNIT_EXPECT_KASAN_FAIL(test, __clear_bit(nr, addr)); + KUNIT_EXPECT_KASAN_FAIL(test, clear_bit_unlock(nr, addr)); + KUNIT_EXPECT_KASAN_FAIL(test, __clear_bit_unlock(nr, addr)); + KUNIT_EXPECT_KASAN_FAIL(test, change_bit(nr, addr)); + KUNIT_EXPECT_KASAN_FAIL(test, __change_bit(nr, addr)); +} + +static void kasan_bitops_test_and_modify(struct kunit *test, int nr, void *addr) +{ + KUNIT_EXPECT_KASAN_FAIL(test, test_and_set_bit(nr, addr)); + KUNIT_EXPECT_KASAN_FAIL(test, __test_and_set_bit(nr, addr)); + KUNIT_EXPECT_KASAN_FAIL(test, test_and_set_bit_lock(nr, addr)); + KUNIT_EXPECT_KASAN_FAIL(test, test_and_clear_bit(nr, addr)); + KUNIT_EXPECT_KASAN_FAIL(test, __test_and_clear_bit(nr, addr)); + KUNIT_EXPECT_KASAN_FAIL(test, test_and_change_bit(nr, addr)); + KUNIT_EXPECT_KASAN_FAIL(test, __test_and_change_bit(nr, addr)); + KUNIT_EXPECT_KASAN_FAIL(test, kasan_int_result = test_bit(nr, addr)); + +#if defined(clear_bit_unlock_is_negative_byte) + KUNIT_EXPECT_KASAN_FAIL(test, kasan_int_result = + clear_bit_unlock_is_negative_byte(nr, addr)); +#endif +} + +static void kasan_bitops_generic(struct kunit *test) { + long *bits; + + /* This test is specifically crafted for the generic mode. */ + if (!IS_ENABLED(CONFIG_KASAN_GENERIC)) { + kunit_info(test, "CONFIG_KASAN_GENERIC required\n"); + return; + } + /* * Allocate 1 more byte, which causes kzalloc to round up to 16-bytes; * this way we do not actually corrupt other memory. */ - long *bits = kzalloc(sizeof(*bits) + 1, GFP_KERNEL); + bits = kzalloc(sizeof(*bits) + 1, GFP_KERNEL); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, bits); /* @@ -633,55 +717,34 @@ static void kasan_bitops(struct kunit *test) * below accesses are still out-of-bounds, since bitops are defined to * operate on the whole long the bit is in. */ - KUNIT_EXPECT_KASAN_FAIL(test, set_bit(BITS_PER_LONG, bits)); - - KUNIT_EXPECT_KASAN_FAIL(test, __set_bit(BITS_PER_LONG, bits)); - - KUNIT_EXPECT_KASAN_FAIL(test, clear_bit(BITS_PER_LONG, bits)); - - KUNIT_EXPECT_KASAN_FAIL(test, __clear_bit(BITS_PER_LONG, bits)); - - KUNIT_EXPECT_KASAN_FAIL(test, clear_bit_unlock(BITS_PER_LONG, bits)); - - KUNIT_EXPECT_KASAN_FAIL(test, __clear_bit_unlock(BITS_PER_LONG, bits)); - - KUNIT_EXPECT_KASAN_FAIL(test, change_bit(BITS_PER_LONG, bits)); - - KUNIT_EXPECT_KASAN_FAIL(test, __change_bit(BITS_PER_LONG, bits)); + kasan_bitops_modify(test, BITS_PER_LONG, bits); /* * Below calls try to access bit beyond allocated memory. */ - KUNIT_EXPECT_KASAN_FAIL(test, - test_and_set_bit(BITS_PER_LONG + BITS_PER_BYTE, bits)); - - KUNIT_EXPECT_KASAN_FAIL(test, - __test_and_set_bit(BITS_PER_LONG + BITS_PER_BYTE, bits)); - - KUNIT_EXPECT_KASAN_FAIL(test, - test_and_set_bit_lock(BITS_PER_LONG + BITS_PER_BYTE, bits)); + kasan_bitops_test_and_modify(test, BITS_PER_LONG + BITS_PER_BYTE, bits); - KUNIT_EXPECT_KASAN_FAIL(test, - test_and_clear_bit(BITS_PER_LONG + BITS_PER_BYTE, bits)); + kfree(bits); +} - KUNIT_EXPECT_KASAN_FAIL(test, - __test_and_clear_bit(BITS_PER_LONG + BITS_PER_BYTE, bits)); +static void kasan_bitops_tags(struct kunit *test) +{ + long *bits; - KUNIT_EXPECT_KASAN_FAIL(test, - test_and_change_bit(BITS_PER_LONG + BITS_PER_BYTE, bits)); + /* This test is specifically crafted for the tag-based mode. */ + if (IS_ENABLED(CONFIG_KASAN_GENERIC)) { + kunit_info(test, "CONFIG_KASAN_SW_TAGS required\n"); + return; + } - KUNIT_EXPECT_KASAN_FAIL(test, - __test_and_change_bit(BITS_PER_LONG + BITS_PER_BYTE, bits)); + /* Allocation size will be rounded to up granule size, which is 16. */ + bits = kzalloc(sizeof(*bits), GFP_KERNEL); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, bits); - KUNIT_EXPECT_KASAN_FAIL(test, - kasan_int_result = - test_bit(BITS_PER_LONG + BITS_PER_BYTE, bits)); + /* Do the accesses past the 16 allocated bytes. */ + kasan_bitops_modify(test, BITS_PER_LONG, &bits[1]); + kasan_bitops_test_and_modify(test, BITS_PER_LONG + BITS_PER_BYTE, &bits[1]); -#if defined(clear_bit_unlock_is_negative_byte) - KUNIT_EXPECT_KASAN_FAIL(test, - kasan_int_result = clear_bit_unlock_is_negative_byte( - BITS_PER_LONG + BITS_PER_BYTE, bits)); -#endif kfree(bits); } @@ -728,6 +791,7 @@ static struct kunit_case kasan_kunit_test_cases[] = { KUNIT_CASE(kmalloc_oob_krealloc_more), KUNIT_CASE(kmalloc_oob_krealloc_less), KUNIT_CASE(kmalloc_oob_16), + KUNIT_CASE(kmalloc_uaf_16), KUNIT_CASE(kmalloc_oob_in_memset), KUNIT_CASE(kmalloc_oob_memset_2), KUNIT_CASE(kmalloc_oob_memset_4), @@ -751,7 +815,8 @@ static struct kunit_case kasan_kunit_test_cases[] = { KUNIT_CASE(kasan_memchr), KUNIT_CASE(kasan_memcmp), KUNIT_CASE(kasan_strings), - KUNIT_CASE(kasan_bitops), + KUNIT_CASE(kasan_bitops_generic), + KUNIT_CASE(kasan_bitops_tags), KUNIT_CASE(kmalloc_double_kzfree), KUNIT_CASE(vmalloc_oob), {} diff --git a/mm/hugetlb.c b/mm/hugetlb.c index fe76f8fd5a73..5a620f690911 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -648,6 +648,8 @@ retry: } del += t - f; + hugetlb_cgroup_uncharge_file_region( + resv, rg, t - f); /* New entry for end of split region */ nrg->from = t; @@ -660,9 +662,6 @@ retry: /* Original entry is trimmed */ rg->to = f; - hugetlb_cgroup_uncharge_file_region( - resv, rg, nrg->to - nrg->from); - list_add(&nrg->link, &rg->link); nrg = NULL; break; @@ -678,17 +677,17 @@ retry: } if (f <= rg->from) { /* Trim beginning of region */ - del += t - rg->from; - rg->from = t; - hugetlb_cgroup_uncharge_file_region(resv, rg, t - rg->from); - } else { /* Trim end of region */ - del += rg->to - f; - rg->to = f; + del += t - rg->from; + rg->from = t; + } else { /* Trim end of region */ hugetlb_cgroup_uncharge_file_region(resv, rg, rg->to - f); + + del += rg->to - f; + rg->to = f; } } @@ -2443,6 +2442,9 @@ struct page *alloc_huge_page(struct vm_area_struct *vma, rsv_adjust = hugepage_subpool_put_pages(spool, 1); hugetlb_acct_memory(h, -rsv_adjust); + if (deferred_reserve) + hugetlb_cgroup_uncharge_page_rsvd(hstate_index(h), + pages_per_huge_page(h), page); } return page; diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 3a24e3b619f5..3dcbf24d2227 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -4110,11 +4110,17 @@ static int memcg_stat_show(struct seq_file *m, void *v) (u64)memsw * PAGE_SIZE); for (i = 0; i < ARRAY_SIZE(memcg1_stats); i++) { + unsigned long nr; + if (memcg1_stats[i] == MEMCG_SWAP && !do_memsw_account()) continue; + nr = memcg_page_state(memcg, memcg1_stats[i]); +#ifdef CONFIG_TRANSPARENT_HUGEPAGE + if (memcg1_stats[i] == NR_ANON_THPS) + nr *= HPAGE_PMD_NR; +#endif seq_printf(m, "total_%s %llu\n", memcg1_stat_names[i], - (u64)memcg_page_state(memcg, memcg1_stats[i]) * - PAGE_SIZE); + (u64)nr * PAGE_SIZE); } for (i = 0; i < ARRAY_SIZE(memcg1_events); i++) @@ -5339,17 +5345,22 @@ mem_cgroup_css_alloc(struct cgroup_subsys_state *parent_css) memcg->swappiness = mem_cgroup_swappiness(parent); memcg->oom_kill_disable = parent->oom_kill_disable; } - if (parent && parent->use_hierarchy) { + if (!parent) { + page_counter_init(&memcg->memory, NULL); + page_counter_init(&memcg->swap, NULL); + page_counter_init(&memcg->kmem, NULL); + page_counter_init(&memcg->tcpmem, NULL); + } else if (parent->use_hierarchy) { memcg->use_hierarchy = true; page_counter_init(&memcg->memory, &parent->memory); page_counter_init(&memcg->swap, &parent->swap); page_counter_init(&memcg->kmem, &parent->kmem); page_counter_init(&memcg->tcpmem, &parent->tcpmem); } else { - page_counter_init(&memcg->memory, NULL); - page_counter_init(&memcg->swap, NULL); - page_counter_init(&memcg->kmem, NULL); - page_counter_init(&memcg->tcpmem, NULL); + page_counter_init(&memcg->memory, &root_mem_cgroup->memory); + page_counter_init(&memcg->swap, &root_mem_cgroup->swap); + page_counter_init(&memcg->kmem, &root_mem_cgroup->kmem); + page_counter_init(&memcg->tcpmem, &root_mem_cgroup->tcpmem); /* * Deeper hierachy with use_hierarchy == false doesn't make * much sense so let cgroup subsystem know about this diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 3fde772ef5ef..3ca4898f3f24 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -525,7 +525,7 @@ static int queue_pages_pte_range(pmd_t *pmd, unsigned long addr, unsigned long flags = qp->flags; int ret; bool has_unmovable = false; - pte_t *pte; + pte_t *pte, *mapped_pte; spinlock_t *ptl; ptl = pmd_trans_huge_lock(pmd, vma); @@ -539,7 +539,7 @@ static int queue_pages_pte_range(pmd_t *pmd, unsigned long addr, if (pmd_trans_unstable(pmd)) return 0; - pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl); + mapped_pte = pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl); for (; addr != end; pte++, addr += PAGE_SIZE) { if (!pte_present(*pte)) continue; @@ -571,7 +571,7 @@ static int queue_pages_pte_range(pmd_t *pmd, unsigned long addr, } else break; } - pte_unmap_unlock(pte - 1, ptl); + pte_unmap_unlock(mapped_pte, ptl); cond_resched(); if (has_unmovable) diff --git a/mm/memremap.c b/mm/memremap.c index 73a206d0f645..16b2fb482da1 100644 --- a/mm/memremap.c +++ b/mm/memremap.c @@ -41,28 +41,24 @@ EXPORT_SYMBOL_GPL(memremap_compat_align); DEFINE_STATIC_KEY_FALSE(devmap_managed_key); EXPORT_SYMBOL(devmap_managed_key); -static void devmap_managed_enable_put(void) +static void devmap_managed_enable_put(struct dev_pagemap *pgmap) { - static_branch_dec(&devmap_managed_key); + if (pgmap->type == MEMORY_DEVICE_PRIVATE || + pgmap->type == MEMORY_DEVICE_FS_DAX) + static_branch_dec(&devmap_managed_key); } -static int devmap_managed_enable_get(struct dev_pagemap *pgmap) +static void devmap_managed_enable_get(struct dev_pagemap *pgmap) { - if (pgmap->type == MEMORY_DEVICE_PRIVATE && - (!pgmap->ops || !pgmap->ops->page_free)) { - WARN(1, "Missing page_free method\n"); - return -EINVAL; - } - - static_branch_inc(&devmap_managed_key); - return 0; + if (pgmap->type == MEMORY_DEVICE_PRIVATE || + pgmap->type == MEMORY_DEVICE_FS_DAX) + static_branch_inc(&devmap_managed_key); } #else -static int devmap_managed_enable_get(struct dev_pagemap *pgmap) +static void devmap_managed_enable_get(struct dev_pagemap *pgmap) { - return -EINVAL; } -static void devmap_managed_enable_put(void) +static void devmap_managed_enable_put(struct dev_pagemap *pgmap) { } #endif /* CONFIG_DEV_PAGEMAP_OPS */ @@ -169,7 +165,7 @@ void memunmap_pages(struct dev_pagemap *pgmap) pageunmap_range(pgmap, i); WARN_ONCE(pgmap->altmap.alloc, "failed to free all reserved pages\n"); - devmap_managed_enable_put(); + devmap_managed_enable_put(pgmap); } EXPORT_SYMBOL_GPL(memunmap_pages); @@ -307,7 +303,6 @@ void *memremap_pages(struct dev_pagemap *pgmap, int nid) .pgprot = PAGE_KERNEL, }; const int nr_range = pgmap->nr_range; - bool need_devmap_managed = true; int error, i; if (WARN_ONCE(!nr_range, "nr_range must be specified\n")) @@ -323,6 +318,10 @@ void *memremap_pages(struct dev_pagemap *pgmap, int nid) WARN(1, "Missing migrate_to_ram method\n"); return ERR_PTR(-EINVAL); } + if (!pgmap->ops->page_free) { + WARN(1, "Missing page_free method\n"); + return ERR_PTR(-EINVAL); + } if (!pgmap->owner) { WARN(1, "Missing owner\n"); return ERR_PTR(-EINVAL); @@ -336,11 +335,9 @@ void *memremap_pages(struct dev_pagemap *pgmap, int nid) } break; case MEMORY_DEVICE_GENERIC: - need_devmap_managed = false; break; case MEMORY_DEVICE_PCI_P2PDMA: params.pgprot = pgprot_noncached(params.pgprot); - need_devmap_managed = false; break; default: WARN(1, "Invalid pgmap type %d\n", pgmap->type); @@ -364,11 +361,7 @@ void *memremap_pages(struct dev_pagemap *pgmap, int nid) } } - if (need_devmap_managed) { - error = devmap_managed_enable_get(pgmap); - if (error) - return ERR_PTR(error); - } + devmap_managed_enable_get(pgmap); /* * Clear the pgmap nr_range as it will be incremented for each diff --git a/mm/process_vm_access.c b/mm/process_vm_access.c index fd12da80b6f2..702250f148e7 100644 --- a/mm/process_vm_access.c +++ b/mm/process_vm_access.c @@ -5,6 +5,7 @@ * Copyright (C) 2010-2011 Christopher Yeoh <cyeoh@au1.ibm.com>, IBM Corp. */ +#include <linux/compat.h> #include <linux/mm.h> #include <linux/uio.h> #include <linux/sched.h> @@ -273,7 +274,8 @@ static ssize_t process_vm_rw(pid_t pid, return rc; if (!iov_iter_count(&iter)) goto free_iov_l; - iov_r = iovec_from_user(rvec, riovcnt, UIO_FASTIOV, iovstack_r, false); + iov_r = iovec_from_user(rvec, riovcnt, UIO_FASTIOV, iovstack_r, + in_compat_syscall()); if (IS_ERR(iov_r)) { rc = PTR_ERR(iov_r); goto free_iov_l; diff --git a/mm/truncate.c b/mm/truncate.c index 18cec39a9f53..960edf5803ca 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -528,7 +528,7 @@ void truncate_inode_pages_final(struct address_space *mapping) } EXPORT_SYMBOL(truncate_inode_pages_final); -unsigned long __invalidate_mapping_pages(struct address_space *mapping, +static unsigned long __invalidate_mapping_pages(struct address_space *mapping, pgoff_t start, pgoff_t end, unsigned long *nr_pagevec) { pgoff_t indices[PAGEVEC_SIZE]; diff --git a/net/atm/lec.c b/net/atm/lec.c index dbabb65d8b67..7226c784dbe0 100644 --- a/net/atm/lec.c +++ b/net/atm/lec.c @@ -954,9 +954,8 @@ static void *lec_seq_next(struct seq_file *seq, void *v, loff_t *pos) { struct lec_state *state = seq->private; - v = lec_get_idx(state, 1); - *pos += !!PTR_ERR(v); - return v; + ++*pos; + return lec_get_idx(state, 1); } static int lec_seq_show(struct seq_file *seq, void *v) diff --git a/net/bluetooth/msft.c b/net/bluetooth/msft.c index 8579bfeb2836..4b39534a14a1 100644 --- a/net/bluetooth/msft.c +++ b/net/bluetooth/msft.c @@ -12,12 +12,13 @@ struct msft_cp_read_supported_features { __u8 sub_opcode; } __packed; + struct msft_rp_read_supported_features { __u8 status; __u8 sub_opcode; __le64 features; __u8 evt_prefix_len; - __u8 evt_prefix[0]; + __u8 evt_prefix[]; } __packed; struct msft_data { diff --git a/net/can/Kconfig b/net/can/Kconfig index 224e5e0283a9..7c9958df91d3 100644 --- a/net/can/Kconfig +++ b/net/can/Kconfig @@ -62,8 +62,9 @@ config CAN_ISOTP communication between CAN nodes via two defined CAN Identifiers. As CAN frames can only transport a small amount of data bytes (max. 8 bytes for 'classic' CAN and max. 64 bytes for CAN FD) this - segmentation is needed to transport longer PDUs as needed e.g. for - vehicle diagnosis (UDS, ISO 14229) or IP-over-CAN traffic. + segmentation is needed to transport longer Protocol Data Units (PDU) + as needed e.g. for vehicle diagnosis (UDS, ISO 14229) or IP-over-CAN + traffic. This protocol driver implements data transfers according to ISO 15765-2:2016 for 'classic' CAN and CAN FD frame types. If you want to perform automotive vehicle diagnostic services (UDS), diff --git a/net/can/isotp.c b/net/can/isotp.c index 4c2062875893..d78ab13bd8be 100644 --- a/net/can/isotp.c +++ b/net/can/isotp.c @@ -252,14 +252,16 @@ static void isotp_rcv_skb(struct sk_buff *skb, struct sock *sk) static u8 padlen(u8 datalen) { - const u8 plen[] = {8, 8, 8, 8, 8, 8, 8, 8, 8, /* 0 - 8 */ - 12, 12, 12, 12, /* 9 - 12 */ - 16, 16, 16, 16, /* 13 - 16 */ - 20, 20, 20, 20, /* 17 - 20 */ - 24, 24, 24, 24, /* 21 - 24 */ - 32, 32, 32, 32, 32, 32, 32, 32, /* 25 - 32 */ - 48, 48, 48, 48, 48, 48, 48, 48, /* 33 - 40 */ - 48, 48, 48, 48, 48, 48, 48, 48}; /* 41 - 48 */ + static const u8 plen[] = { + 8, 8, 8, 8, 8, 8, 8, 8, 8, /* 0 - 8 */ + 12, 12, 12, 12, /* 9 - 12 */ + 16, 16, 16, 16, /* 13 - 16 */ + 20, 20, 20, 20, /* 17 - 20 */ + 24, 24, 24, 24, /* 21 - 24 */ + 32, 32, 32, 32, 32, 32, 32, 32, /* 25 - 32 */ + 48, 48, 48, 48, 48, 48, 48, 48, /* 33 - 40 */ + 48, 48, 48, 48, 48, 48, 48, 48 /* 41 - 48 */ + }; if (datalen > 48) return 64; @@ -569,10 +571,6 @@ static int isotp_rcv_cf(struct sock *sk, struct canfd_frame *cf, int ae, return 0; } - /* no creation of flow control frames */ - if (so->opt.flags & CAN_ISOTP_LISTEN_MODE) - return 0; - /* perform blocksize handling, if enabled */ if (!so->rxfc.bs || ++so->rx.bs < so->rxfc.bs) { /* start rx timeout watchdog */ @@ -581,6 +579,10 @@ static int isotp_rcv_cf(struct sock *sk, struct canfd_frame *cf, int ae, return 0; } + /* no creation of flow control frames */ + if (so->opt.flags & CAN_ISOTP_LISTEN_MODE) + return 0; + /* we reached the specified blocksize so->rxfc.bs */ isotp_send_fc(sk, ae, ISOTP_FC_CTS); return 0; diff --git a/net/can/j1939/socket.c b/net/can/j1939/socket.c index 1be4c898b2fa..f23966526a88 100644 --- a/net/can/j1939/socket.c +++ b/net/can/j1939/socket.c @@ -475,6 +475,12 @@ static int j1939_sk_bind(struct socket *sock, struct sockaddr *uaddr, int len) goto out_release_sock; } + if (!(ndev->flags & IFF_UP)) { + dev_put(ndev); + ret = -ENETDOWN; + goto out_release_sock; + } + priv = j1939_netdev_start(ndev); dev_put(ndev); if (IS_ERR(priv)) { diff --git a/net/can/proc.c b/net/can/proc.c index 550928b8b8a2..5ea8695f507e 100644 --- a/net/can/proc.c +++ b/net/can/proc.c @@ -462,6 +462,9 @@ void can_init_proc(struct net *net) */ void can_remove_proc(struct net *net) { + if (!net->can.proc_dir) + return; + if (net->can.pde_stats) remove_proc_entry(CAN_PROC_STATS, net->can.proc_dir); @@ -486,6 +489,5 @@ void can_remove_proc(struct net *net) if (net->can.pde_rcvlist_sff) remove_proc_entry(CAN_PROC_RCVLIST_SFF, net->can.proc_dir); - if (net->can.proc_dir) - remove_proc_entry("can", net->proc_net); + remove_proc_entry("can", net->proc_net); } diff --git a/net/core/devlink.c b/net/core/devlink.c index a578634052a3..a932d95be798 100644 --- a/net/core/devlink.c +++ b/net/core/devlink.c @@ -4213,10 +4213,12 @@ static int devlink_nl_region_fill(struct sk_buff *msg, struct devlink *devlink, if (err) goto nla_put_failure; - if (region->port) - if (nla_put_u32(msg, DEVLINK_ATTR_PORT_INDEX, - region->port->index)) + if (region->port) { + err = nla_put_u32(msg, DEVLINK_ATTR_PORT_INDEX, + region->port->index); + if (err) goto nla_put_failure; + } err = nla_put_string(msg, DEVLINK_ATTR_REGION_NAME, region->ops->name); if (err) @@ -4265,10 +4267,12 @@ devlink_nl_region_notify_build(struct devlink_region *region, if (err) goto out_cancel_msg; - if (region->port) - if (nla_put_u32(msg, DEVLINK_ATTR_PORT_INDEX, - region->port->index)) + if (region->port) { + err = nla_put_u32(msg, DEVLINK_ATTR_PORT_INDEX, + region->port->index); + if (err) goto out_cancel_msg; + } err = nla_put_string(msg, DEVLINK_ATTR_REGION_NAME, region->ops->name); @@ -4915,8 +4919,10 @@ static int devlink_nl_cmd_region_read_dumpit(struct sk_buff *skb, index = nla_get_u32(info->attrs[DEVLINK_ATTR_PORT_INDEX]); port = devlink_port_get_by_index(devlink, index); - if (!port) - return -ENODEV; + if (!port) { + err = -ENODEV; + goto out_unlock; + } } region_name = nla_data(attrs[DEVLINK_ATTR_REGION_NAME]); @@ -4962,10 +4968,12 @@ static int devlink_nl_cmd_region_read_dumpit(struct sk_buff *skb, if (err) goto nla_put_failure; - if (region->port) - if (nla_put_u32(skb, DEVLINK_ATTR_PORT_INDEX, - region->port->index)) + if (region->port) { + err = nla_put_u32(skb, DEVLINK_ATTR_PORT_INDEX, + region->port->index); + if (err) goto nla_put_failure; + } err = nla_put_string(skb, DEVLINK_ATTR_REGION_NAME, region_name); if (err) diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index 8b04d1dcfec4..ee65c9225178 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -608,9 +608,6 @@ void ip_md_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, ttl = ip4_dst_hoplimit(&rt->dst); } - if (!df && skb->protocol == htons(ETH_P_IP)) - df = inner_iph->frag_off & htons(IP_DF); - headroom += LL_RESERVED_SPACE(rt->dst.dev) + rt->dst.header_len; if (headroom > dev->needed_headroom) dev->needed_headroom = headroom; diff --git a/net/ipv4/netfilter.c b/net/ipv4/netfilter.c index a058213b77a7..7c841037c533 100644 --- a/net/ipv4/netfilter.c +++ b/net/ipv4/netfilter.c @@ -17,17 +17,19 @@ #include <net/netfilter/nf_queue.h> /* route_me_harder function, used by iptable_nat, iptable_mangle + ip_queue */ -int ip_route_me_harder(struct net *net, struct sk_buff *skb, unsigned int addr_type) +int ip_route_me_harder(struct net *net, struct sock *sk, struct sk_buff *skb, unsigned int addr_type) { const struct iphdr *iph = ip_hdr(skb); struct rtable *rt; struct flowi4 fl4 = {}; __be32 saddr = iph->saddr; - const struct sock *sk = skb_to_full_sk(skb); - __u8 flags = sk ? inet_sk_flowi_flags(sk) : 0; + __u8 flags; struct net_device *dev = skb_dst(skb)->dev; unsigned int hh_len; + sk = sk_to_full_sk(sk); + flags = sk ? inet_sk_flowi_flags(sk) : 0; + if (addr_type == RTN_UNSPEC) addr_type = inet_addr_type_dev_table(net, dev, saddr); if (addr_type == RTN_LOCAL || addr_type == RTN_UNICAST) diff --git a/net/ipv4/netfilter/iptable_mangle.c b/net/ipv4/netfilter/iptable_mangle.c index f703a717ab1d..833079589273 100644 --- a/net/ipv4/netfilter/iptable_mangle.c +++ b/net/ipv4/netfilter/iptable_mangle.c @@ -62,7 +62,7 @@ ipt_mangle_out(struct sk_buff *skb, const struct nf_hook_state *state) iph->daddr != daddr || skb->mark != mark || iph->tos != tos) { - err = ip_route_me_harder(state->net, skb, RTN_UNSPEC); + err = ip_route_me_harder(state->net, state->sk, skb, RTN_UNSPEC); if (err < 0) ret = NF_DROP_ERR(err); } diff --git a/net/ipv4/netfilter/nf_reject_ipv4.c b/net/ipv4/netfilter/nf_reject_ipv4.c index 9dcfa4e461b6..93b07739807b 100644 --- a/net/ipv4/netfilter/nf_reject_ipv4.c +++ b/net/ipv4/netfilter/nf_reject_ipv4.c @@ -145,7 +145,7 @@ void nf_send_reset(struct net *net, struct sk_buff *oldskb, int hook) ip4_dst_hoplimit(skb_dst(nskb))); nf_reject_ip_tcphdr_put(nskb, oldskb, oth); - if (ip_route_me_harder(net, nskb, RTN_UNSPEC)) + if (ip_route_me_harder(net, nskb->sk, nskb, RTN_UNSPEC)) goto free_nskb; niph = ip_hdr(nskb); diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index bae4284bf542..b2bc3d7fe9e8 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -485,6 +485,8 @@ static inline bool tcp_stream_is_readable(const struct tcp_sock *tp, return true; if (tcp_rmem_pressure(sk)) return true; + if (tcp_receive_window(tp) <= inet_csk(sk)->icsk_ack.rcv_mss) + return true; } if (sk->sk_prot->stream_memory_read) return sk->sk_prot->stream_memory_read(sk); diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index fc445833b5e5..389d1b340248 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -4908,7 +4908,8 @@ void tcp_data_ready(struct sock *sk) int avail = tp->rcv_nxt - tp->copied_seq; if (avail < sk->sk_rcvlowat && !tcp_rmem_pressure(sk) && - !sock_flag(sk, SOCK_DONE)) + !sock_flag(sk, SOCK_DONE) && + tcp_receive_window(tp) > inet_csk(sk)->icsk_ack.rcv_mss) return; sk->sk_data_ready(sk); diff --git a/net/ipv4/xfrm4_tunnel.c b/net/ipv4/xfrm4_tunnel.c index dc19aff7c2e0..fb0648e7fb32 100644 --- a/net/ipv4/xfrm4_tunnel.c +++ b/net/ipv4/xfrm4_tunnel.c @@ -64,14 +64,14 @@ static int xfrm_tunnel_err(struct sk_buff *skb, u32 info) static struct xfrm_tunnel xfrm_tunnel_handler __read_mostly = { .handler = xfrm_tunnel_rcv, .err_handler = xfrm_tunnel_err, - .priority = 3, + .priority = 4, }; #if IS_ENABLED(CONFIG_IPV6) static struct xfrm_tunnel xfrm64_tunnel_handler __read_mostly = { .handler = xfrm_tunnel_rcv, .err_handler = xfrm_tunnel_err, - .priority = 2, + .priority = 3, }; #endif diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c index ec448b71bf9a..8956144ea65e 100644 --- a/net/ipv6/icmp.c +++ b/net/ipv6/icmp.c @@ -158,7 +158,13 @@ static bool is_ineligible(const struct sk_buff *skb) tp = skb_header_pointer(skb, ptr+offsetof(struct icmp6hdr, icmp6_type), sizeof(_type), &_type); - if (!tp || !(*tp & ICMPV6_INFOMSG_MASK)) + + /* Based on RFC 8200, Section 4.5 Fragment Header, return + * false if this is a fragment packet with no icmp header info. + */ + if (!tp && frag_off != 0) + return false; + else if (!tp || !(*tp & ICMPV6_INFOMSG_MASK)) return true; } return false; diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index a0217e5bf3bc..648db3fe508f 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1271,6 +1271,8 @@ route_lookup: if (max_headroom > dev->needed_headroom) dev->needed_headroom = max_headroom; + skb_set_inner_ipproto(skb, proto); + err = ip6_tnl_encap(skb, t, &proto, fl6); if (err) return err; @@ -1280,8 +1282,6 @@ route_lookup: ipv6_push_frag_opts(skb, &opt.ops, &proto); } - skb_set_inner_ipproto(skb, proto); - skb_push(skb, sizeof(struct ipv6hdr)); skb_reset_network_header(skb); ipv6h = ipv6_hdr(skb); diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c index 6d0e942d082d..ab9a279dd6d4 100644 --- a/net/ipv6/netfilter.c +++ b/net/ipv6/netfilter.c @@ -20,10 +20,10 @@ #include <net/netfilter/ipv6/nf_defrag_ipv6.h> #include "../bridge/br_private.h" -int ip6_route_me_harder(struct net *net, struct sk_buff *skb) +int ip6_route_me_harder(struct net *net, struct sock *sk_partial, struct sk_buff *skb) { const struct ipv6hdr *iph = ipv6_hdr(skb); - struct sock *sk = sk_to_full_sk(skb->sk); + struct sock *sk = sk_to_full_sk(sk_partial); unsigned int hh_len; struct dst_entry *dst; int strict = (ipv6_addr_type(&iph->daddr) & @@ -84,7 +84,7 @@ static int nf_ip6_reroute(struct sk_buff *skb, if (!ipv6_addr_equal(&iph->daddr, &rt_info->daddr) || !ipv6_addr_equal(&iph->saddr, &rt_info->saddr) || skb->mark != rt_info->mark) - return ip6_route_me_harder(entry->state.net, skb); + return ip6_route_me_harder(entry->state.net, entry->state.sk, skb); } return 0; } diff --git a/net/ipv6/netfilter/ip6table_mangle.c b/net/ipv6/netfilter/ip6table_mangle.c index 1a2748611e00..cee74803d7a1 100644 --- a/net/ipv6/netfilter/ip6table_mangle.c +++ b/net/ipv6/netfilter/ip6table_mangle.c @@ -57,7 +57,7 @@ ip6t_mangle_out(struct sk_buff *skb, const struct nf_hook_state *state) skb->mark != mark || ipv6_hdr(skb)->hop_limit != hop_limit || flowlabel != *((u_int32_t *)ipv6_hdr(skb)))) { - err = ip6_route_me_harder(state->net, skb); + err = ip6_route_me_harder(state->net, state->sk, skb); if (err < 0) ret = NF_DROP_ERR(err); } diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c index 1f5d4d196dcc..c8cf1bbad74a 100644 --- a/net/ipv6/reassembly.c +++ b/net/ipv6/reassembly.c @@ -42,6 +42,8 @@ #include <linux/skbuff.h> #include <linux/slab.h> #include <linux/export.h> +#include <linux/tcp.h> +#include <linux/udp.h> #include <net/sock.h> #include <net/snmp.h> @@ -322,7 +324,9 @@ static int ipv6_frag_rcv(struct sk_buff *skb) struct frag_queue *fq; const struct ipv6hdr *hdr = ipv6_hdr(skb); struct net *net = dev_net(skb_dst(skb)->dev); - int iif; + __be16 frag_off; + int iif, offset; + u8 nexthdr; if (IP6CB(skb)->flags & IP6SKB_FRAGMENTED) goto fail_hdr; @@ -351,6 +355,33 @@ static int ipv6_frag_rcv(struct sk_buff *skb) return 1; } + /* RFC 8200, Section 4.5 Fragment Header: + * If the first fragment does not include all headers through an + * Upper-Layer header, then that fragment should be discarded and + * an ICMP Parameter Problem, Code 3, message should be sent to + * the source of the fragment, with the Pointer field set to zero. + */ + nexthdr = hdr->nexthdr; + offset = ipv6_skip_exthdr(skb, skb_transport_offset(skb), &nexthdr, &frag_off); + if (offset >= 0) { + /* Check some common protocols' header */ + if (nexthdr == IPPROTO_TCP) + offset += sizeof(struct tcphdr); + else if (nexthdr == IPPROTO_UDP) + offset += sizeof(struct udphdr); + else if (nexthdr == IPPROTO_ICMPV6) + offset += sizeof(struct icmp6hdr); + else + offset += 1; + + if (!(frag_off & htons(IP6_OFFSET)) && offset > skb->len) { + __IP6_INC_STATS(net, __in6_dev_get_safely(skb->dev), + IPSTATS_MIB_INHDRERRORS); + icmpv6_param_prob(skb, ICMPV6_HDR_INCOMP, 0); + return -1; + } + } + iif = skb->dev ? skb->dev->ifindex : 0; fq = fq_find(net, fhdr->identification, hdr, iif); if (fq) { diff --git a/net/ipv6/xfrm6_tunnel.c b/net/ipv6/xfrm6_tunnel.c index 25b7ebda2fab..f696d46e6910 100644 --- a/net/ipv6/xfrm6_tunnel.c +++ b/net/ipv6/xfrm6_tunnel.c @@ -303,13 +303,13 @@ static const struct xfrm_type xfrm6_tunnel_type = { static struct xfrm6_tunnel xfrm6_tunnel_handler __read_mostly = { .handler = xfrm6_tunnel_rcv, .err_handler = xfrm6_tunnel_err, - .priority = 2, + .priority = 3, }; static struct xfrm6_tunnel xfrm46_tunnel_handler __read_mostly = { .handler = xfrm6_tunnel_rcv, .err_handler = xfrm6_tunnel_err, - .priority = 2, + .priority = 3, }; static int __net_init xfrm6_tunnel_net_init(struct net *net) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index f400240a556f..6adfcb9c06dc 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -5464,6 +5464,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, struct cfg80211_assoc_request *req) { bool is_6ghz = req->bss->channel->band == NL80211_BAND_6GHZ; + bool is_5ghz = req->bss->channel->band == NL80211_BAND_5GHZ; struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_bss *bss = (void *)req->bss->priv; @@ -5616,7 +5617,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap)) memcpy(&assoc_data->ap_vht_cap, vht_ie + 2, sizeof(struct ieee80211_vht_cap)); - else if (!is_6ghz) + else if (is_5ghz) ifmgd->flags |= IEEE80211_STA_DISABLE_VHT | IEEE80211_STA_DISABLE_HE; rcu_read_unlock(); diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index fb4f2b9b294f..4fe284ff1ea3 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -258,6 +258,24 @@ struct sta_info *sta_info_get_by_idx(struct ieee80211_sub_if_data *sdata, */ void sta_info_free(struct ieee80211_local *local, struct sta_info *sta) { + /* + * If we had used sta_info_pre_move_state() then we might not + * have gone through the state transitions down again, so do + * it here now (and warn if it's inserted). + * + * This will clear state such as fast TX/RX that may have been + * allocated during state transitions. + */ + while (sta->sta_state > IEEE80211_STA_NONE) { + int ret; + + WARN_ON_ONCE(test_sta_flag(sta, WLAN_STA_INSERTED)); + + ret = sta_info_move_state(sta, sta->sta_state - 1); + if (WARN_ONCE(ret, "sta_info_move_state() returned %d\n", ret)) + break; + } + if (sta->rate_ctrl) rate_control_free_sta(sta); diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 00ae81e9e1a1..7afd07636b81 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -785,7 +785,7 @@ int sta_info_init(struct ieee80211_local *local); void sta_info_stop(struct ieee80211_local *local); /** - * sta_info_flush - flush matching STA entries from the STA table + * __sta_info_flush - flush matching STA entries from the STA table * * Returns the number of removed STA entries. * @@ -794,6 +794,13 @@ void sta_info_stop(struct ieee80211_local *local); */ int __sta_info_flush(struct ieee80211_sub_if_data *sdata, bool vlans); +/** + * sta_info_flush - flush matching STA entries from the STA table + * + * Returns the number of removed STA entries. + * + * @sdata: sdata to remove all stations from + */ static inline int sta_info_flush(struct ieee80211_sub_if_data *sdata) { return __sta_info_flush(sdata, false); diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 8ba10a48ded4..56a4d0d20a26 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1942,19 +1942,24 @@ static bool ieee80211_tx(struct ieee80211_sub_if_data *sdata, /* device xmit handlers */ +enum ieee80211_encrypt { + ENCRYPT_NO, + ENCRYPT_MGMT, + ENCRYPT_DATA, +}; + static int ieee80211_skb_resize(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, - int head_need, bool may_encrypt) + int head_need, + enum ieee80211_encrypt encrypt) { struct ieee80211_local *local = sdata->local; - struct ieee80211_hdr *hdr; bool enc_tailroom; int tail_need = 0; - hdr = (struct ieee80211_hdr *) skb->data; - enc_tailroom = may_encrypt && - (sdata->crypto_tx_tailroom_needed_cnt || - ieee80211_is_mgmt(hdr->frame_control)); + enc_tailroom = encrypt == ENCRYPT_MGMT || + (encrypt == ENCRYPT_DATA && + sdata->crypto_tx_tailroom_needed_cnt); if (enc_tailroom) { tail_need = IEEE80211_ENCRYPT_TAILROOM; @@ -1985,23 +1990,29 @@ void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, { struct ieee80211_local *local = sdata->local; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ieee80211_hdr *hdr; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; int headroom; - bool may_encrypt; + enum ieee80211_encrypt encrypt; - may_encrypt = !(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT); + if (info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT) + encrypt = ENCRYPT_NO; + else if (ieee80211_is_mgmt(hdr->frame_control)) + encrypt = ENCRYPT_MGMT; + else + encrypt = ENCRYPT_DATA; headroom = local->tx_headroom; - if (may_encrypt) + if (encrypt != ENCRYPT_NO) headroom += sdata->encrypt_headroom; headroom -= skb_headroom(skb); headroom = max_t(int, 0, headroom); - if (ieee80211_skb_resize(sdata, skb, headroom, may_encrypt)) { + if (ieee80211_skb_resize(sdata, skb, headroom, encrypt)) { ieee80211_free_txskb(&local->hw, skb); return; } + /* reload after potential resize */ hdr = (struct ieee80211_hdr *) skb->data; info->control.vif = &sdata->vif; @@ -2828,7 +2839,7 @@ static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata, head_need += sdata->encrypt_headroom; head_need += local->tx_headroom; head_need = max_t(int, 0, head_need); - if (ieee80211_skb_resize(sdata, skb, head_need, true)) { + if (ieee80211_skb_resize(sdata, skb, head_need, ENCRYPT_DATA)) { ieee80211_free_txskb(&local->hw, skb); skb = NULL; return ERR_PTR(-ENOMEM); @@ -3502,7 +3513,7 @@ static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata, if (unlikely(ieee80211_skb_resize(sdata, skb, max_t(int, extra_head + hw_headroom - skb_headroom(skb), 0), - false))) { + ENCRYPT_NO))) { kfree_skb(skb); return true; } @@ -3619,13 +3630,14 @@ begin: tx.skb = skb; tx.sdata = vif_to_sdata(info->control.vif); - if (txq->sta && !(info->flags & IEEE80211_TX_CTL_INJECTED)) { + if (txq->sta) { tx.sta = container_of(txq->sta, struct sta_info, sta); /* * Drop unicast frames to unauthorised stations unless they are - * EAPOL frames from the local station. + * injected frames or EAPOL frames from the local station. */ - if (unlikely(ieee80211_is_data(hdr->frame_control) && + if (unlikely(!(info->flags & IEEE80211_TX_CTL_INJECTED) && + ieee80211_is_data(hdr->frame_control) && !ieee80211_vif_is_mesh(&tx.sdata->vif) && tx.sdata->vif.type != NL80211_IFTYPE_OCB && !is_multicast_ether_addr(hdr->addr1) && diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index 185dacb39781..e7419fd15d84 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -274,6 +274,15 @@ static bool __mptcp_move_skb(struct mptcp_sock *msk, struct sock *ssk, skb_ext_reset(skb); skb_orphan(skb); + /* try to fetch required memory from subflow */ + if (!sk_rmem_schedule(sk, skb, skb->truesize)) { + if (ssk->sk_forward_alloc < skb->truesize) + goto drop; + __sk_mem_reclaim(ssk, skb->truesize); + if (!sk_rmem_schedule(sk, skb, skb->truesize)) + goto drop; + } + /* the skb map_seq accounts for the skb offset: * mptcp_subflow_get_mapped_dsn() is based on the current tp->copied_seq * value @@ -301,6 +310,7 @@ static bool __mptcp_move_skb(struct mptcp_sock *msk, struct sock *ssk, * will retransmit as needed, if needed. */ MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_DUPDATA); +drop: mptcp_drop(sk, skb); return false; } diff --git a/net/mptcp/token.c b/net/mptcp/token.c index 8b47c4bb1c6b..feb4b9ffd462 100644 --- a/net/mptcp/token.c +++ b/net/mptcp/token.c @@ -291,7 +291,7 @@ struct mptcp_sock *mptcp_token_iter_next(const struct net *net, long *s_slot, { struct mptcp_sock *ret = NULL; struct hlist_nulls_node *pos; - int slot, num; + int slot, num = 0; for (slot = *s_slot; slot <= token_mask; *s_num = 0, slot++) { struct token_bucket *bucket = &token_hash[slot]; diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c index 6f35832f0de3..7cff6e5e7445 100644 --- a/net/netfilter/ipset/ip_set_core.c +++ b/net/netfilter/ipset/ip_set_core.c @@ -637,13 +637,14 @@ ip_set_match_extensions(struct ip_set *set, const struct ip_set_ext *ext, if (SET_WITH_COUNTER(set)) { struct ip_set_counter *counter = ext_counter(data, set); + ip_set_update_counter(counter, ext, flags); + if (flags & IPSET_FLAG_MATCH_COUNTERS && !(ip_set_match_counter(ip_set_get_packets(counter), mext->packets, mext->packets_op) && ip_set_match_counter(ip_set_get_bytes(counter), mext->bytes, mext->bytes_op))) return false; - ip_set_update_counter(counter, ext, flags); } if (SET_WITH_SKBINFO(set)) ip_set_get_skbinfo(ext_skbinfo(data, set), diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index cc3c275934f4..c0b8215ab3d4 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -742,12 +742,12 @@ static int ip_vs_route_me_harder(struct netns_ipvs *ipvs, int af, struct dst_entry *dst = skb_dst(skb); if (dst->dev && !(dst->dev->flags & IFF_LOOPBACK) && - ip6_route_me_harder(ipvs->net, skb) != 0) + ip6_route_me_harder(ipvs->net, skb->sk, skb) != 0) return 1; } else #endif if (!(skb_rtable(skb)->rt_flags & RTCF_LOCAL) && - ip_route_me_harder(ipvs->net, skb, RTN_LOCAL) != 0) + ip_route_me_harder(ipvs->net, skb->sk, skb, RTN_LOCAL) != 0) return 1; return 0; diff --git a/net/netfilter/nf_nat_proto.c b/net/netfilter/nf_nat_proto.c index 59151dc07fdc..e87b6bd6b3cd 100644 --- a/net/netfilter/nf_nat_proto.c +++ b/net/netfilter/nf_nat_proto.c @@ -715,7 +715,7 @@ nf_nat_ipv4_local_fn(void *priv, struct sk_buff *skb, if (ct->tuplehash[dir].tuple.dst.u3.ip != ct->tuplehash[!dir].tuple.src.u3.ip) { - err = ip_route_me_harder(state->net, skb, RTN_UNSPEC); + err = ip_route_me_harder(state->net, state->sk, skb, RTN_UNSPEC); if (err < 0) ret = NF_DROP_ERR(err); } @@ -953,7 +953,7 @@ nf_nat_ipv6_local_fn(void *priv, struct sk_buff *skb, if (!nf_inet_addr_cmp(&ct->tuplehash[dir].tuple.dst.u3, &ct->tuplehash[!dir].tuple.src.u3)) { - err = nf_ip6_route_me_harder(state->net, skb); + err = nf_ip6_route_me_harder(state->net, state->sk, skb); if (err < 0) ret = NF_DROP_ERR(err); } diff --git a/net/netfilter/nf_synproxy_core.c b/net/netfilter/nf_synproxy_core.c index 9cca35d22927..d7d34a62d3bf 100644 --- a/net/netfilter/nf_synproxy_core.c +++ b/net/netfilter/nf_synproxy_core.c @@ -446,7 +446,7 @@ synproxy_send_tcp(struct net *net, skb_dst_set_noref(nskb, skb_dst(skb)); nskb->protocol = htons(ETH_P_IP); - if (ip_route_me_harder(net, nskb, RTN_UNSPEC)) + if (ip_route_me_harder(net, nskb->sk, nskb, RTN_UNSPEC)) goto free_nskb; if (nfct) { diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 65cb8e3c13d9..0f58e98542be 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -7137,7 +7137,7 @@ static void nf_tables_flowtable_notify(struct nft_ctx *ctx, GFP_KERNEL); kfree(buf); - if (ctx->report && + if (!ctx->report && !nfnetlink_has_listeners(ctx->net, NFNLGRP_NFTABLES)) return; @@ -7259,7 +7259,7 @@ static void nf_tables_gen_notify(struct net *net, struct sk_buff *skb, audit_log_nfcfg("?:0;?:0", 0, net->nft.base_seq, AUDIT_NFT_OP_GEN_REGISTER, GFP_KERNEL); - if (nlmsg_report(nlh) && + if (!nlmsg_report(nlh) && !nfnetlink_has_listeners(net, NFNLGRP_NFTABLES)) return; @@ -8053,12 +8053,16 @@ static void nf_tables_abort_release(struct nft_trans *trans) kfree(trans); } -static int __nf_tables_abort(struct net *net, bool autoload) +static int __nf_tables_abort(struct net *net, enum nfnl_abort_action action) { struct nft_trans *trans, *next; struct nft_trans_elem *te; struct nft_hook *hook; + if (action == NFNL_ABORT_VALIDATE && + nf_tables_validate(net) < 0) + return -EAGAIN; + list_for_each_entry_safe_reverse(trans, next, &net->nft.commit_list, list) { switch (trans->msg_type) { @@ -8190,7 +8194,7 @@ static int __nf_tables_abort(struct net *net, bool autoload) nf_tables_abort_release(trans); } - if (autoload) + if (action == NFNL_ABORT_AUTOLOAD) nf_tables_module_autoload(net); else nf_tables_module_autoload_cleanup(net); @@ -8203,9 +8207,10 @@ static void nf_tables_cleanup(struct net *net) nft_validate_state_update(net, NFT_VALIDATE_SKIP); } -static int nf_tables_abort(struct net *net, struct sk_buff *skb, bool autoload) +static int nf_tables_abort(struct net *net, struct sk_buff *skb, + enum nfnl_abort_action action) { - int ret = __nf_tables_abort(net, autoload); + int ret = __nf_tables_abort(net, action); mutex_unlock(&net->nft.commit_mutex); @@ -8836,7 +8841,7 @@ static void __net_exit nf_tables_exit_net(struct net *net) { mutex_lock(&net->nft.commit_mutex); if (!list_empty(&net->nft.commit_list)) - __nf_tables_abort(net, false); + __nf_tables_abort(net, NFNL_ABORT_NONE); __nft_release_tables(net); mutex_unlock(&net->nft.commit_mutex); WARN_ON_ONCE(!list_empty(&net->nft.tables)); diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c index 2daa1f6ae344..d3df66a39b5e 100644 --- a/net/netfilter/nfnetlink.c +++ b/net/netfilter/nfnetlink.c @@ -333,7 +333,7 @@ static void nfnetlink_rcv_batch(struct sk_buff *skb, struct nlmsghdr *nlh, return netlink_ack(skb, nlh, -EINVAL, NULL); replay: status = 0; - +replay_abort: skb = netlink_skb_clone(oskb, GFP_KERNEL); if (!skb) return netlink_ack(oskb, nlh, -ENOMEM, NULL); @@ -499,7 +499,7 @@ ack: } done: if (status & NFNL_BATCH_REPLAY) { - ss->abort(net, oskb, true); + ss->abort(net, oskb, NFNL_ABORT_AUTOLOAD); nfnl_err_reset(&err_list); kfree_skb(skb); module_put(ss->owner); @@ -510,11 +510,25 @@ done: status |= NFNL_BATCH_REPLAY; goto done; } else if (err) { - ss->abort(net, oskb, false); + ss->abort(net, oskb, NFNL_ABORT_NONE); netlink_ack(oskb, nlmsg_hdr(oskb), err, NULL); } } else { - ss->abort(net, oskb, false); + enum nfnl_abort_action abort_action; + + if (status & NFNL_BATCH_FAILURE) + abort_action = NFNL_ABORT_NONE; + else + abort_action = NFNL_ABORT_VALIDATE; + + err = ss->abort(net, oskb, abort_action); + if (err == -EAGAIN) { + nfnl_err_reset(&err_list); + kfree_skb(skb); + module_put(ss->owner); + status |= NFNL_BATCH_FAILURE; + goto replay_abort; + } } if (ss->cleanup) ss->cleanup(net); diff --git a/net/netfilter/nft_chain_route.c b/net/netfilter/nft_chain_route.c index 8826bbe71136..edd02cda57fc 100644 --- a/net/netfilter/nft_chain_route.c +++ b/net/netfilter/nft_chain_route.c @@ -42,7 +42,7 @@ static unsigned int nf_route_table_hook4(void *priv, iph->daddr != daddr || skb->mark != mark || iph->tos != tos) { - err = ip_route_me_harder(state->net, skb, RTN_UNSPEC); + err = ip_route_me_harder(state->net, state->sk, skb, RTN_UNSPEC); if (err < 0) ret = NF_DROP_ERR(err); } @@ -92,7 +92,7 @@ static unsigned int nf_route_table_hook6(void *priv, skb->mark != mark || ipv6_hdr(skb)->hop_limit != hop_limit || flowlabel != *((u32 *)ipv6_hdr(skb)))) { - err = nf_ip6_route_me_harder(state->net, skb); + err = nf_ip6_route_me_harder(state->net, state->sk, skb); if (err < 0) ret = NF_DROP_ERR(err); } diff --git a/net/netfilter/utils.c b/net/netfilter/utils.c index cedf47ab3c6f..2182d361e273 100644 --- a/net/netfilter/utils.c +++ b/net/netfilter/utils.c @@ -191,8 +191,8 @@ static int nf_ip_reroute(struct sk_buff *skb, const struct nf_queue_entry *entry skb->mark == rt_info->mark && iph->daddr == rt_info->daddr && iph->saddr == rt_info->saddr)) - return ip_route_me_harder(entry->state.net, skb, - RTN_UNSPEC); + return ip_route_me_harder(entry->state.net, entry->state.sk, + skb, RTN_UNSPEC); } #endif return 0; diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c index 832f898edb6a..9d6ef6cb9b26 100644 --- a/net/openvswitch/datapath.c +++ b/net/openvswitch/datapath.c @@ -1703,13 +1703,13 @@ static int ovs_dp_cmd_new(struct sk_buff *skb, struct genl_info *info) parms.port_no = OVSP_LOCAL; parms.upcall_portids = a[OVS_DP_ATTR_UPCALL_PID]; - err = ovs_dp_change(dp, a); - if (err) - goto err_destroy_meters; - /* So far only local changes have been made, now need the lock. */ ovs_lock(); + err = ovs_dp_change(dp, a); + if (err) + goto err_unlock_and_destroy_meters; + vport = new_vport(&parms); if (IS_ERR(vport)) { err = PTR_ERR(vport); @@ -1725,8 +1725,7 @@ static int ovs_dp_cmd_new(struct sk_buff *skb, struct genl_info *info) ovs_dp_reset_user_features(skb, info); } - ovs_unlock(); - goto err_destroy_meters; + goto err_unlock_and_destroy_meters; } err = ovs_dp_cmd_fill_info(dp, reply, info->snd_portid, @@ -1741,7 +1740,8 @@ static int ovs_dp_cmd_new(struct sk_buff *skb, struct genl_info *info) ovs_notify(&dp_datapath_genl_family, reply, info); return 0; -err_destroy_meters: +err_unlock_and_destroy_meters: + ovs_unlock(); ovs_meters_exit(dp); err_destroy_ports: kfree(dp->ports); diff --git a/net/openvswitch/flow_table.c b/net/openvswitch/flow_table.c index f3486a37361a..c89c8da99f1a 100644 --- a/net/openvswitch/flow_table.c +++ b/net/openvswitch/flow_table.c @@ -390,7 +390,7 @@ static struct mask_cache *tbl_mask_cache_alloc(u32 size) } int ovs_flow_tbl_masks_cache_resize(struct flow_table *table, u32 size) { - struct mask_cache *mc = rcu_dereference(table->mask_cache); + struct mask_cache *mc = rcu_dereference_ovsl(table->mask_cache); struct mask_cache *new; if (size == mc->cache_size) diff --git a/net/rds/ib_cm.c b/net/rds/ib_cm.c index 06603dd1c8aa..b36b60668b1d 100644 --- a/net/rds/ib_cm.c +++ b/net/rds/ib_cm.c @@ -956,9 +956,10 @@ int rds_ib_cm_initiate_connect(struct rdma_cm_id *cm_id, bool isv6) rds_ib_cm_fill_conn_param(conn, &conn_param, &dp, conn->c_proposed_version, UINT_MAX, UINT_MAX, isv6); - ret = rdma_connect(cm_id, &conn_param); + ret = rdma_connect_locked(cm_id, &conn_param); if (ret) - rds_ib_conn_error(conn, "rdma_connect failed (%d)\n", ret); + rds_ib_conn_error(conn, "rdma_connect_locked failed (%d)\n", + ret); out: /* Beware - returning non-zero tells the rdma_cm to destroy diff --git a/net/sched/act_mpls.c b/net/sched/act_mpls.c index f40bf9771cb9..5c7456e5b5cf 100644 --- a/net/sched/act_mpls.c +++ b/net/sched/act_mpls.c @@ -426,6 +426,7 @@ static void __exit mpls_cleanup_module(void) module_init(mpls_init_module); module_exit(mpls_cleanup_module); +MODULE_SOFTDEP("post: mpls_gso"); MODULE_AUTHOR("Netronome Systems <oss-drivers@netronome.com>"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("MPLS manipulation actions"); diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index faeabff283a2..838b3fd94d77 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -652,12 +652,12 @@ static void tc_block_indr_cleanup(struct flow_block_cb *block_cb) block_cb->indr.binder_type, &block->flow_block, tcf_block_shared(block), &extack); + rtnl_lock(); down_write(&block->cb_lock); list_del(&block_cb->driver_list); list_move(&block_cb->list, &bo.cb_list); - up_write(&block->cb_lock); - rtnl_lock(); tcf_block_unbind(block, &bo); + up_write(&block->cb_lock); rtnl_unlock(); } diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index 84f82771cdf5..0c345e43a09a 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -330,7 +330,7 @@ static s64 tabledist(s64 mu, s32 sigma, /* default uniform distribution */ if (dist == NULL) - return ((rnd % (2 * sigma)) + mu) - sigma; + return ((rnd % (2 * (u32)sigma)) + mu) - sigma; t = dist->table[rnd % dist->size]; x = (sigma % NETEM_DIST_SCALE) * t; @@ -812,6 +812,10 @@ static void get_slot(struct netem_sched_data *q, const struct nlattr *attr) q->slot_config.max_packets = INT_MAX; if (q->slot_config.max_bytes == 0) q->slot_config.max_bytes = INT_MAX; + + /* capping dist_jitter to the range acceptable by tabledist() */ + q->slot_config.dist_jitter = min_t(__s64, INT_MAX, abs(q->slot_config.dist_jitter)); + q->slot.packets_left = q->slot_config.max_packets; q->slot.bytes_left = q->slot_config.max_bytes; if (q->slot_config.min_delay | q->slot_config.max_delay | @@ -1037,6 +1041,9 @@ static int netem_change(struct Qdisc *sch, struct nlattr *opt, if (tb[TCA_NETEM_SLOT]) get_slot(q, tb[TCA_NETEM_SLOT]); + /* capping jitter to the range acceptable by tabledist() */ + q->jitter = min_t(s64, abs(q->jitter), INT_MAX); + return ret; get_table_failure: diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index aa821e71f05e..813d30767204 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -1601,12 +1601,12 @@ static int sctp_cmd_interpreter(enum sctp_event_type event_type, break; case SCTP_CMD_INIT_FAILED: - sctp_cmd_init_failed(commands, asoc, cmd->obj.u32); + sctp_cmd_init_failed(commands, asoc, cmd->obj.u16); break; case SCTP_CMD_ASSOC_FAILED: sctp_cmd_assoc_failed(commands, asoc, event_type, - subtype, chunk, cmd->obj.u32); + subtype, chunk, cmd->obj.u16); break; case SCTP_CMD_INIT_COUNTER_INC: diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index 82be0bd0f6e8..e9f487c8c6d5 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -1317,10 +1317,10 @@ static void smc_listen_out_err(struct smc_sock *new_smc) /* listen worker: decline and fall back if possible */ static void smc_listen_decline(struct smc_sock *new_smc, int reason_code, - struct smc_init_info *ini, u8 version) + int local_first, u8 version) { /* RDMA setup failed, switch back to TCP */ - if (ini->first_contact_local) + if (local_first) smc_lgr_cleanup_early(&new_smc->conn); else smc_conn_free(&new_smc->conn); @@ -1768,7 +1768,8 @@ static void smc_listen_work(struct work_struct *work) out_unlock: mutex_unlock(&smc_server_lgr_pending); out_decl: - smc_listen_decline(new_smc, rc, ini, version); + smc_listen_decline(new_smc, rc, ini ? ini->first_contact_local : 0, + version); out_free: kfree(ini); kfree(buf); diff --git a/net/smc/smc_clc.h b/net/smc/smc_clc.h index b3f46ab79e47..c579d1d5995a 100644 --- a/net/smc/smc_clc.h +++ b/net/smc/smc_clc.h @@ -124,7 +124,7 @@ struct smc_clc_v2_extension { struct smc_clnt_opts_area_hdr hdr; u8 roce[16]; /* RoCEv2 GID */ u8 reserved[16]; - u8 user_eids[0][SMC_MAX_EID_LEN]; + u8 user_eids[][SMC_MAX_EID_LEN]; }; struct smc_clc_msg_proposal_prefix { /* prefix part of clc proposal message*/ @@ -143,7 +143,7 @@ struct smc_clc_msg_smcd { /* SMC-D GID information */ struct smc_clc_smcd_v2_extension { u8 system_eid[SMC_MAX_EID_LEN]; u8 reserved[16]; - struct smc_clc_smcd_gid_chid gidchid[0]; + struct smc_clc_smcd_gid_chid gidchid[]; }; struct smc_clc_msg_proposal { /* clc proposal message sent by Linux */ diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c index d790c43c473f..2b19863f7171 100644 --- a/net/smc/smc_core.c +++ b/net/smc/smc_core.c @@ -1615,8 +1615,11 @@ static struct smc_buf_desc *smcd_new_buf_create(struct smc_link_group *lgr, rc = smc_ism_register_dmb(lgr, bufsize, buf_desc); if (rc) { kfree(buf_desc); - return (rc == -ENOMEM) ? ERR_PTR(-EAGAIN) : - ERR_PTR(-EIO); + if (rc == -ENOMEM) + return ERR_PTR(-EAGAIN); + if (rc == -ENOSPC) + return ERR_PTR(-ENOSPC); + return ERR_PTR(-EIO); } buf_desc->pages = virt_to_page(buf_desc->cpu_addr); /* CDC header stored in buf. So, pretend it was smaller */ diff --git a/net/tipc/msg.c b/net/tipc/msg.c index 2a78aa701572..32c79c59052b 100644 --- a/net/tipc/msg.c +++ b/net/tipc/msg.c @@ -150,12 +150,11 @@ int tipc_buf_append(struct sk_buff **headbuf, struct sk_buff **buf) if (fragid == FIRST_FRAGMENT) { if (unlikely(head)) goto err; - if (skb_cloned(frag)) - frag = skb_copy(frag, GFP_ATOMIC); + *buf = NULL; + frag = skb_unshare(frag, GFP_ATOMIC); if (unlikely(!frag)) goto err; head = *headbuf = frag; - *buf = NULL; TIPC_SKB_CB(head)->tail = NULL; if (skb_is_nonlinear(head)) { skb_walk_frags(head, tail) { diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c index 9e93bc201cc0..b4d7b8aba003 100644 --- a/net/vmw_vsock/af_vsock.c +++ b/net/vmw_vsock/af_vsock.c @@ -739,7 +739,7 @@ static struct sock *__vsock_create(struct net *net, vsk->buffer_min_size = psk->buffer_min_size; vsk->buffer_max_size = psk->buffer_max_size; } else { - vsk->trusted = capable(CAP_NET_ADMIN); + vsk->trusted = ns_capable_noaudit(&init_user_ns, CAP_NET_ADMIN); vsk->owner = get_current_cred(); vsk->connect_timeout = VSOCK_DEFAULT_CONNECT_TIMEOUT; vsk->buffer_size = VSOCK_DEFAULT_BUFFER_SIZE; diff --git a/net/wireless/core.c b/net/wireless/core.c index 9f23923e8d29..240282c083aa 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -1250,8 +1250,7 @@ void cfg80211_stop_iface(struct wiphy *wiphy, struct wireless_dev *wdev, } EXPORT_SYMBOL(cfg80211_stop_iface); -void cfg80211_init_wdev(struct cfg80211_registered_device *rdev, - struct wireless_dev *wdev) +void cfg80211_init_wdev(struct wireless_dev *wdev) { mutex_init(&wdev->mtx); INIT_LIST_HEAD(&wdev->event_list); @@ -1262,6 +1261,30 @@ void cfg80211_init_wdev(struct cfg80211_registered_device *rdev, spin_lock_init(&wdev->pmsr_lock); INIT_WORK(&wdev->pmsr_free_wk, cfg80211_pmsr_free_wk); +#ifdef CONFIG_CFG80211_WEXT + wdev->wext.default_key = -1; + wdev->wext.default_mgmt_key = -1; + wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC; +#endif + + if (wdev->wiphy->flags & WIPHY_FLAG_PS_ON_BY_DEFAULT) + wdev->ps = true; + else + wdev->ps = false; + /* allow mac80211 to determine the timeout */ + wdev->ps_timeout = -1; + + if ((wdev->iftype == NL80211_IFTYPE_STATION || + wdev->iftype == NL80211_IFTYPE_P2P_CLIENT || + wdev->iftype == NL80211_IFTYPE_ADHOC) && !wdev->use_4addr) + wdev->netdev->priv_flags |= IFF_DONT_BRIDGE; + + INIT_WORK(&wdev->disconnect_wk, cfg80211_autodisconnect_wk); +} + +void cfg80211_register_wdev(struct cfg80211_registered_device *rdev, + struct wireless_dev *wdev) +{ /* * We get here also when the interface changes network namespaces, * as it's registered into the new one, but we don't want it to @@ -1295,6 +1318,11 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb, switch (state) { case NETDEV_POST_INIT: SET_NETDEV_DEVTYPE(dev, &wiphy_type); + wdev->netdev = dev; + /* can only change netns with wiphy */ + dev->features |= NETIF_F_NETNS_LOCAL; + + cfg80211_init_wdev(wdev); break; case NETDEV_REGISTER: /* @@ -1302,35 +1330,12 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb, * called within code protected by it when interfaces * are added with nl80211. */ - /* can only change netns with wiphy */ - dev->features |= NETIF_F_NETNS_LOCAL; - if (sysfs_create_link(&dev->dev.kobj, &rdev->wiphy.dev.kobj, "phy80211")) { pr_err("failed to add phy80211 symlink to netdev!\n"); } - wdev->netdev = dev; -#ifdef CONFIG_CFG80211_WEXT - wdev->wext.default_key = -1; - wdev->wext.default_mgmt_key = -1; - wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC; -#endif - - if (wdev->wiphy->flags & WIPHY_FLAG_PS_ON_BY_DEFAULT) - wdev->ps = true; - else - wdev->ps = false; - /* allow mac80211 to determine the timeout */ - wdev->ps_timeout = -1; - - if ((wdev->iftype == NL80211_IFTYPE_STATION || - wdev->iftype == NL80211_IFTYPE_P2P_CLIENT || - wdev->iftype == NL80211_IFTYPE_ADHOC) && !wdev->use_4addr) - dev->priv_flags |= IFF_DONT_BRIDGE; - - INIT_WORK(&wdev->disconnect_wk, cfg80211_autodisconnect_wk); - cfg80211_init_wdev(rdev, wdev); + cfg80211_register_wdev(rdev, wdev); break; case NETDEV_GOING_DOWN: cfg80211_leave(rdev, wdev); diff --git a/net/wireless/core.h b/net/wireless/core.h index e1ec9ac8e608..e3e9686859d4 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -209,8 +209,9 @@ struct wiphy *wiphy_idx_to_wiphy(int wiphy_idx); int cfg80211_switch_netns(struct cfg80211_registered_device *rdev, struct net *net); -void cfg80211_init_wdev(struct cfg80211_registered_device *rdev, - struct wireless_dev *wdev); +void cfg80211_init_wdev(struct wireless_dev *wdev); +void cfg80211_register_wdev(struct cfg80211_registered_device *rdev, + struct wireless_dev *wdev); static inline void wdev_lock(struct wireless_dev *wdev) __acquires(wdev) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 554796a6c6fe..a77174b99b07 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3885,7 +3885,8 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info) * P2P Device and NAN do not have a netdev, so don't go * through the netdev notifier and must be added here */ - cfg80211_init_wdev(rdev, wdev); + cfg80211_init_wdev(wdev); + cfg80211_register_wdev(rdev, wdev); break; default: break; diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 3dab859641e1..a04fdfb35f07 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -3616,7 +3616,7 @@ static void print_rd_rules(const struct ieee80211_regdomain *rd) power_rule = ®_rule->power_rule; if (reg_rule->flags & NL80211_RRF_AUTO_BW) - snprintf(bw, sizeof(bw), "%d KHz, %d KHz AUTO", + snprintf(bw, sizeof(bw), "%d KHz, %u KHz AUTO", freq_range->max_bandwidth_khz, reg_get_max_bandwidth(rd, reg_rule)); else diff --git a/net/xfrm/xfrm_interface.c b/net/xfrm/xfrm_interface.c index aa4cdcf69d47..9b8e292a7c6a 100644 --- a/net/xfrm/xfrm_interface.c +++ b/net/xfrm/xfrm_interface.c @@ -803,14 +803,14 @@ static struct xfrm6_tunnel xfrmi_ipv6_handler __read_mostly = { .handler = xfrmi6_rcv_tunnel, .cb_handler = xfrmi_rcv_cb, .err_handler = xfrmi6_err, - .priority = -1, + .priority = 2, }; static struct xfrm6_tunnel xfrmi_ip6ip_handler __read_mostly = { .handler = xfrmi6_rcv_tunnel, .cb_handler = xfrmi_rcv_cb, .err_handler = xfrmi6_err, - .priority = -1, + .priority = 2, }; #endif @@ -848,14 +848,14 @@ static struct xfrm_tunnel xfrmi_ipip_handler __read_mostly = { .handler = xfrmi4_rcv_tunnel, .cb_handler = xfrmi_rcv_cb, .err_handler = xfrmi4_err, - .priority = -1, + .priority = 3, }; static struct xfrm_tunnel xfrmi_ipip6_handler __read_mostly = { .handler = xfrmi4_rcv_tunnel, .cb_handler = xfrmi_rcv_cb, .err_handler = xfrmi4_err, - .priority = -1, + .priority = 2, }; #endif diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index bbd4643d7e82..a77da7aae6fe 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -2004,6 +2004,7 @@ int xfrm_alloc_spi(struct xfrm_state *x, u32 low, u32 high) int err = -ENOENT; __be32 minspi = htonl(low); __be32 maxspi = htonl(high); + __be32 newspi = 0; u32 mark = x->mark.v & x->mark.m; spin_lock_bh(&x->lock); @@ -2022,21 +2023,22 @@ int xfrm_alloc_spi(struct xfrm_state *x, u32 low, u32 high) xfrm_state_put(x0); goto unlock; } - x->id.spi = minspi; + newspi = minspi; } else { u32 spi = 0; for (h = 0; h < high-low+1; h++) { spi = low + prandom_u32()%(high-low+1); x0 = xfrm_state_lookup(net, mark, &x->id.daddr, htonl(spi), x->id.proto, x->props.family); if (x0 == NULL) { - x->id.spi = htonl(spi); + newspi = htonl(spi); break; } xfrm_state_put(x0); } } - if (x->id.spi) { + if (newspi) { spin_lock_bh(&net->xfrm.xfrm_state_lock); + x->id.spi = newspi; h = xfrm_spi_hash(net, &x->id.daddr, x->id.spi, x->id.proto, x->props.family); hlist_add_head_rcu(&x->byspi, net->xfrm.state_byspi + h); spin_unlock_bh(&net->xfrm.xfrm_state_lock); diff --git a/samples/mic/mpssd/.gitignore b/samples/mic/mpssd/.gitignore deleted file mode 100644 index aa03f1eb37a0..000000000000 --- a/samples/mic/mpssd/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -mpssd diff --git a/samples/mic/mpssd/Makefile b/samples/mic/mpssd/Makefile deleted file mode 100644 index a7a6e0c70424..000000000000 --- a/samples/mic/mpssd/Makefile +++ /dev/null @@ -1,28 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -ifndef CROSS_COMPILE -uname_M := $(shell uname -m 2>/dev/null || echo not) -ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/) - -ifeq ($(ARCH),x86) - -PROGS := mpssd -CC = $(CROSS_COMPILE)gcc -CFLAGS := -I../../../usr/include -I../../../tools/include - -ifdef DEBUG -CFLAGS += -DDEBUG=$(DEBUG) -endif - -all: $(PROGS) -mpssd: mpssd.c sysfs.c - $(CC) $(CFLAGS) mpssd.c sysfs.c -o mpssd -lpthread - -install: - install mpssd /usr/sbin/mpssd - install micctrl /usr/sbin/micctrl - -clean: - rm -fr $(PROGS) - -endif -endif diff --git a/samples/mic/mpssd/micctrl b/samples/mic/mpssd/micctrl deleted file mode 100755 index 030a60b04046..000000000000 --- a/samples/mic/mpssd/micctrl +++ /dev/null @@ -1,162 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0-only -# Intel MIC Platform Software Stack (MPSS) -# -# Copyright(c) 2013 Intel Corporation. -# -# Intel MIC User Space Tools. -# -# micctrl - Controls MIC boot/start/stop. -# -# chkconfig: 2345 95 05 -# description: start MPSS stack processing. -# -### BEGIN INIT INFO -# Provides: micctrl -### END INIT INFO - -# Source function library. -. /etc/init.d/functions - -sysfs="/sys/class/mic" - -_status() -{ - f=$sysfs/$1 - echo -e $1 state: "`cat $f/state`" shutdown_status: "`cat $f/shutdown_status`" -} - -status() -{ - if [ "`echo $1 | head -c3`" == "mic" ]; then - _status $1 - return $? - fi - for f in $sysfs/* - do - _status `basename $f` - RETVAL=$? - [ $RETVAL -ne 0 ] && return $RETVAL - done - return 0 -} - -_reset() -{ - f=$sysfs/$1 - echo reset > $f/state -} - -reset() -{ - if [ "`echo $1 | head -c3`" == "mic" ]; then - _reset $1 - return $? - fi - for f in $sysfs/* - do - _reset `basename $f` - RETVAL=$? - [ $RETVAL -ne 0 ] && return $RETVAL - done - return 0 -} - -_boot() -{ - f=$sysfs/$1 - echo "linux" > $f/bootmode - echo "mic/uos.img" > $f/firmware - echo "mic/$1.image" > $f/ramdisk - echo "boot" > $f/state -} - -boot() -{ - if [ "`echo $1 | head -c3`" == "mic" ]; then - _boot $1 - return $? - fi - for f in $sysfs/* - do - _boot `basename $f` - RETVAL=$? - [ $RETVAL -ne 0 ] && return $RETVAL - done - return 0 -} - -_shutdown() -{ - f=$sysfs/$1 - echo shutdown > $f/state -} - -shutdown() -{ - if [ "`echo $1 | head -c3`" == "mic" ]; then - _shutdown $1 - return $? - fi - for f in $sysfs/* - do - _shutdown `basename $f` - RETVAL=$? - [ $RETVAL -ne 0 ] && return $RETVAL - done - return 0 -} - -_wait() -{ - f=$sysfs/$1 - while [ "`cat $f/state`" != "offline" -a "`cat $f/state`" != "online" ] - do - sleep 1 - echo -e "Waiting for $1 to go offline" - done -} - -wait() -{ - if [ "`echo $1 | head -c3`" == "mic" ]; then - _wait $1 - return $? - fi - # Wait for the cards to go offline - for f in $sysfs/* - do - _wait `basename $f` - RETVAL=$? - [ $RETVAL -ne 0 ] && return $RETVAL - done - return 0 -} - -if [ ! -d "$sysfs" ]; then - echo -e $"Module unloaded " - exit 3 -fi - -case $1 in - -s) - status $2 - ;; - -r) - reset $2 - ;; - -b) - boot $2 - ;; - -S) - shutdown $2 - ;; - -w) - wait $2 - ;; - *) - echo $"Usage: $0 {-s (status) |-r (reset) |-b (boot) |-S (shutdown) |-w (wait)}" - exit 2 -esac - -exit $? diff --git a/samples/mic/mpssd/mpss b/samples/mic/mpssd/mpss deleted file mode 100755 index 248ac7313c71..000000000000 --- a/samples/mic/mpssd/mpss +++ /dev/null @@ -1,189 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0-only -# Intel MIC Platform Software Stack (MPSS) -# -# Copyright(c) 2013 Intel Corporation. -# -# Intel MIC User Space Tools. -# -# mpss Start mpssd. -# -# chkconfig: 2345 95 05 -# description: start MPSS stack processing. -# -### BEGIN INIT INFO -# Provides: mpss -# Required-Start: -# Required-Stop: -# Short-Description: MPSS stack control -# Description: MPSS stack control -### END INIT INFO - -# Source function library. -. /etc/init.d/functions - -exec=/usr/sbin/mpssd -sysfs="/sys/class/mic" -mic_modules="mic_host mic_x100_dma scif vop" - -start() -{ - [ -x $exec ] || exit 5 - - if [ "`ps -e | awk '{print $4}' | grep mpssd | head -1`" = "mpssd" ]; then - echo -e $"MPSSD already running! " - success - echo - return 0 - fi - - echo -e $"Starting MPSS Stack" - echo -e $"Loading MIC drivers:" $mic_modules - - modprobe -a $mic_modules - RETVAL=$? - if [ $RETVAL -ne 0 ]; then - failure - echo - return $RETVAL - fi - - # Start the daemon - echo -n $"Starting MPSSD " - $exec - RETVAL=$? - if [ $RETVAL -ne 0 ]; then - failure - echo - return $RETVAL - fi - success - echo - - sleep 5 - - # Boot the cards - micctrl -b - - # Wait till ping works - for f in $sysfs/* - do - count=100 - ipaddr=`cat $f/cmdline` - ipaddr=${ipaddr#*address,} - ipaddr=`echo $ipaddr | cut -d, -f1 | cut -d\; -f1` - while [ $count -ge 0 ] - do - echo -e "Pinging "`basename $f`" " - ping -c 1 $ipaddr &> /dev/null - RETVAL=$? - if [ $RETVAL -eq 0 ]; then - success - break - fi - sleep 1 - count=`expr $count - 1` - done - [ $RETVAL -ne 0 ] && failure || success - echo - done - return $RETVAL -} - -stop() -{ - echo -e $"Shutting down MPSS Stack: " - - # Bail out if module is unloaded - if [ ! -d "$sysfs" ]; then - echo -n $"Module unloaded " - success - echo - return 0 - fi - - # Shut down the cards. - micctrl -S - - # Wait for the cards to go offline - for f in $sysfs/* - do - while [ "`cat $f/state`" != "ready" ] - do - sleep 1 - echo -e "Waiting for "`basename $f`" to become ready" - done - done - - # Display the status of the cards - micctrl -s - - # Kill MPSSD now - echo -n $"Killing MPSSD" - killall -9 mpssd 2>/dev/null - RETVAL=$? - [ $RETVAL -ne 0 ] && failure || success - echo - return $RETVAL -} - -restart() -{ - stop - sleep 5 - start -} - -status() -{ - micctrl -s - if [ "`ps -e | awk '{print $4}' | grep mpssd | head -n 1`" = "mpssd" ]; then - echo "mpssd is running" - else - echo "mpssd is stopped" - fi - return 0 -} - -unload() -{ - if [ ! -d "$sysfs" ]; then - echo -n $"No MIC_HOST Module: " - success - echo - return - fi - - stop - - sleep 5 - echo -n $"Removing MIC drivers:" $mic_modules - modprobe -r $mic_modules - RETVAL=$? - [ $RETVAL -ne 0 ] && failure || success - echo - return $RETVAL -} - -case $1 in - start) - start - ;; - stop) - stop - ;; - restart) - restart - ;; - status) - status - ;; - unload) - unload - ;; - *) - echo $"Usage: $0 {start|stop|restart|status|unload}" - exit 2 -esac - -exit $? diff --git a/samples/mic/mpssd/mpssd.c b/samples/mic/mpssd/mpssd.c deleted file mode 100644 index c03a05d498f0..000000000000 --- a/samples/mic/mpssd/mpssd.c +++ /dev/null @@ -1,1815 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Intel MIC User Space Tools. - */ - -#define _GNU_SOURCE - -#include <stdlib.h> -#include <fcntl.h> -#include <getopt.h> -#include <assert.h> -#include <unistd.h> -#include <stdbool.h> -#include <signal.h> -#include <poll.h> -#include <features.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <sys/mman.h> -#include <sys/socket.h> -#include <linux/virtio_ring.h> -#include <linux/virtio_net.h> -#include <linux/virtio_console.h> -#include <linux/virtio_blk.h> -#include <linux/version.h> -#include "mpssd.h" -#include <linux/mic_ioctl.h> -#include <linux/mic_common.h> -#include <tools/endian.h> - -static void *init_mic(void *arg); - -static FILE *logfp; -static struct mic_info mic_list; - -#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) - -#define min_t(type, x, y) ({ \ - type __min1 = (x); \ - type __min2 = (y); \ - __min1 < __min2 ? __min1 : __min2; }) - -/* align addr on a size boundary - adjust address up/down if needed */ -#define _ALIGN_DOWN(addr, size) ((addr)&(~((size)-1))) -#define _ALIGN_UP(addr, size) _ALIGN_DOWN(addr + size - 1, size) - -/* align addr on a size boundary - adjust address up if needed */ -#define _ALIGN(addr, size) _ALIGN_UP(addr, size) - -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) _ALIGN(addr, PAGE_SIZE) - -#define READ_ONCE(x) (*(volatile typeof(x) *)&(x)) - -#define GSO_ENABLED 1 -#define MAX_GSO_SIZE (64 * 1024) -#define ETH_H_LEN 14 -#define MAX_NET_PKT_SIZE (_ALIGN_UP(MAX_GSO_SIZE + ETH_H_LEN, 64)) -#define MIC_DEVICE_PAGE_END 0x1000 - -#ifndef VIRTIO_NET_HDR_F_DATA_VALID -#define VIRTIO_NET_HDR_F_DATA_VALID 2 /* Csum is valid */ -#endif - -static struct { - struct mic_device_desc dd; - struct mic_vqconfig vqconfig[2]; - __u32 host_features, guest_acknowledgements; - struct virtio_console_config cons_config; -} virtcons_dev_page = { - .dd = { - .type = VIRTIO_ID_CONSOLE, - .num_vq = ARRAY_SIZE(virtcons_dev_page.vqconfig), - .feature_len = sizeof(virtcons_dev_page.host_features), - .config_len = sizeof(virtcons_dev_page.cons_config), - }, - .vqconfig[0] = { - .num = htole16(MIC_VRING_ENTRIES), - }, - .vqconfig[1] = { - .num = htole16(MIC_VRING_ENTRIES), - }, -}; - -static struct { - struct mic_device_desc dd; - struct mic_vqconfig vqconfig[2]; - __u32 host_features, guest_acknowledgements; - struct virtio_net_config net_config; -} virtnet_dev_page = { - .dd = { - .type = VIRTIO_ID_NET, - .num_vq = ARRAY_SIZE(virtnet_dev_page.vqconfig), - .feature_len = sizeof(virtnet_dev_page.host_features), - .config_len = sizeof(virtnet_dev_page.net_config), - }, - .vqconfig[0] = { - .num = htole16(MIC_VRING_ENTRIES), - }, - .vqconfig[1] = { - .num = htole16(MIC_VRING_ENTRIES), - }, -#if GSO_ENABLED - .host_features = htole32( - 1 << VIRTIO_NET_F_CSUM | - 1 << VIRTIO_NET_F_GSO | - 1 << VIRTIO_NET_F_GUEST_TSO4 | - 1 << VIRTIO_NET_F_GUEST_TSO6 | - 1 << VIRTIO_NET_F_GUEST_ECN), -#else - .host_features = 0, -#endif -}; - -static const char *mic_config_dir = "/etc/mpss"; -static const char *virtblk_backend = "VIRTBLK_BACKEND"; -static struct { - struct mic_device_desc dd; - struct mic_vqconfig vqconfig[1]; - __u32 host_features, guest_acknowledgements; - struct virtio_blk_config blk_config; -} virtblk_dev_page = { - .dd = { - .type = VIRTIO_ID_BLOCK, - .num_vq = ARRAY_SIZE(virtblk_dev_page.vqconfig), - .feature_len = sizeof(virtblk_dev_page.host_features), - .config_len = sizeof(virtblk_dev_page.blk_config), - }, - .vqconfig[0] = { - .num = htole16(MIC_VRING_ENTRIES), - }, - .host_features = - htole32(1<<VIRTIO_BLK_F_SEG_MAX), - .blk_config = { - .seg_max = htole32(MIC_VRING_ENTRIES - 2), - .capacity = htole64(0), - } -}; - -static char *myname; - -static int -tap_configure(struct mic_info *mic, char *dev) -{ - pid_t pid; - char *ifargv[7]; - char ipaddr[IFNAMSIZ]; - int ret = 0; - - pid = fork(); - if (pid == 0) { - ifargv[0] = "ip"; - ifargv[1] = "link"; - ifargv[2] = "set"; - ifargv[3] = dev; - ifargv[4] = "up"; - ifargv[5] = NULL; - mpsslog("Configuring %s\n", dev); - ret = execvp("ip", ifargv); - if (ret < 0) { - mpsslog("%s execvp failed errno %s\n", - mic->name, strerror(errno)); - return ret; - } - } - if (pid < 0) { - mpsslog("%s fork failed errno %s\n", - mic->name, strerror(errno)); - return ret; - } - - ret = waitpid(pid, NULL, 0); - if (ret < 0) { - mpsslog("%s waitpid failed errno %s\n", - mic->name, strerror(errno)); - return ret; - } - - snprintf(ipaddr, IFNAMSIZ, "172.31.%d.254/24", mic->id + 1); - - pid = fork(); - if (pid == 0) { - ifargv[0] = "ip"; - ifargv[1] = "addr"; - ifargv[2] = "add"; - ifargv[3] = ipaddr; - ifargv[4] = "dev"; - ifargv[5] = dev; - ifargv[6] = NULL; - mpsslog("Configuring %s ipaddr %s\n", dev, ipaddr); - ret = execvp("ip", ifargv); - if (ret < 0) { - mpsslog("%s execvp failed errno %s\n", - mic->name, strerror(errno)); - return ret; - } - } - if (pid < 0) { - mpsslog("%s fork failed errno %s\n", - mic->name, strerror(errno)); - return ret; - } - - ret = waitpid(pid, NULL, 0); - if (ret < 0) { - mpsslog("%s waitpid failed errno %s\n", - mic->name, strerror(errno)); - return ret; - } - mpsslog("MIC name %s %s %d DONE!\n", - mic->name, __func__, __LINE__); - return 0; -} - -static int tun_alloc(struct mic_info *mic, char *dev) -{ - struct ifreq ifr; - int fd, err; -#if GSO_ENABLED - unsigned offload; -#endif - fd = open("/dev/net/tun", O_RDWR); - if (fd < 0) { - mpsslog("Could not open /dev/net/tun %s\n", strerror(errno)); - goto done; - } - - memset(&ifr, 0, sizeof(ifr)); - - ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_VNET_HDR; - if (*dev) - strncpy(ifr.ifr_name, dev, IFNAMSIZ); - - err = ioctl(fd, TUNSETIFF, (void *)&ifr); - if (err < 0) { - mpsslog("%s %s %d TUNSETIFF failed %s\n", - mic->name, __func__, __LINE__, strerror(errno)); - close(fd); - return err; - } -#if GSO_ENABLED - offload = TUN_F_CSUM | TUN_F_TSO4 | TUN_F_TSO6 | TUN_F_TSO_ECN; - - err = ioctl(fd, TUNSETOFFLOAD, offload); - if (err < 0) { - mpsslog("%s %s %d TUNSETOFFLOAD failed %s\n", - mic->name, __func__, __LINE__, strerror(errno)); - close(fd); - return err; - } -#endif - strcpy(dev, ifr.ifr_name); - mpsslog("Created TAP %s\n", dev); -done: - return fd; -} - -#define NET_FD_VIRTIO_NET 0 -#define NET_FD_TUN 1 -#define MAX_NET_FD 2 - -static void set_dp(struct mic_info *mic, int type, void *dp) -{ - switch (type) { - case VIRTIO_ID_CONSOLE: - mic->mic_console.console_dp = dp; - return; - case VIRTIO_ID_NET: - mic->mic_net.net_dp = dp; - return; - case VIRTIO_ID_BLOCK: - mic->mic_virtblk.block_dp = dp; - return; - } - mpsslog("%s %s %d not found\n", mic->name, __func__, type); - assert(0); -} - -static void *get_dp(struct mic_info *mic, int type) -{ - switch (type) { - case VIRTIO_ID_CONSOLE: - return mic->mic_console.console_dp; - case VIRTIO_ID_NET: - return mic->mic_net.net_dp; - case VIRTIO_ID_BLOCK: - return mic->mic_virtblk.block_dp; - } - mpsslog("%s %s %d not found\n", mic->name, __func__, type); - assert(0); - return NULL; -} - -static struct mic_device_desc *get_device_desc(struct mic_info *mic, int type) -{ - struct mic_device_desc *d; - int i; - void *dp = get_dp(mic, type); - - for (i = sizeof(struct mic_bootparam); i < PAGE_SIZE; - i += mic_total_desc_size(d)) { - d = dp + i; - - /* End of list */ - if (d->type == 0) - break; - - if (d->type == -1) - continue; - - mpsslog("%s %s d-> type %d d %p\n", - mic->name, __func__, d->type, d); - - if (d->type == (__u8)type) - return d; - } - mpsslog("%s %s %d not found\n", mic->name, __func__, type); - return NULL; -} - -/* See comments in vhost.c for explanation of next_desc() */ -static unsigned next_desc(struct vring_desc *desc) -{ - unsigned int next; - - if (!(le16toh(desc->flags) & VRING_DESC_F_NEXT)) - return -1U; - next = le16toh(desc->next); - return next; -} - -/* Sum up all the IOVEC length */ -static ssize_t -sum_iovec_len(struct mic_copy_desc *copy) -{ - ssize_t sum = 0; - unsigned int i; - - for (i = 0; i < copy->iovcnt; i++) - sum += copy->iov[i].iov_len; - return sum; -} - -static inline void verify_out_len(struct mic_info *mic, - struct mic_copy_desc *copy) -{ - if (copy->out_len != sum_iovec_len(copy)) { - mpsslog("%s %s %d BUG copy->out_len 0x%x len 0x%zx\n", - mic->name, __func__, __LINE__, - copy->out_len, sum_iovec_len(copy)); - assert(copy->out_len == sum_iovec_len(copy)); - } -} - -/* Display an iovec */ -static void -disp_iovec(struct mic_info *mic, struct mic_copy_desc *copy, - const char *s, int line) -{ - unsigned int i; - - for (i = 0; i < copy->iovcnt; i++) - mpsslog("%s %s %d copy->iov[%d] addr %p len 0x%zx\n", - mic->name, s, line, i, - copy->iov[i].iov_base, copy->iov[i].iov_len); -} - -static inline __u16 read_avail_idx(struct mic_vring *vr) -{ - return READ_ONCE(vr->info->avail_idx); -} - -static inline void txrx_prepare(int type, bool tx, struct mic_vring *vr, - struct mic_copy_desc *copy, ssize_t len) -{ - copy->vr_idx = tx ? 0 : 1; - copy->update_used = true; - if (type == VIRTIO_ID_NET) - copy->iov[1].iov_len = len - sizeof(struct virtio_net_hdr); - else - copy->iov[0].iov_len = len; -} - -/* Central API which triggers the copies */ -static int -mic_virtio_copy(struct mic_info *mic, int fd, - struct mic_vring *vr, struct mic_copy_desc *copy) -{ - int ret; - - ret = ioctl(fd, MIC_VIRTIO_COPY_DESC, copy); - if (ret) { - mpsslog("%s %s %d errno %s ret %d\n", - mic->name, __func__, __LINE__, - strerror(errno), ret); - } - return ret; -} - -static inline unsigned _vring_size(unsigned int num, unsigned long align) -{ - return _ALIGN_UP(((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num) - + align - 1) & ~(align - 1)) - + sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num, 4); -} - -/* - * This initialization routine requires at least one - * vring i.e. vr0. vr1 is optional. - */ -static void * -init_vr(struct mic_info *mic, int fd, int type, - struct mic_vring *vr0, struct mic_vring *vr1, int num_vq) -{ - int vr_size; - char *va; - - vr_size = PAGE_ALIGN(_vring_size(MIC_VRING_ENTRIES, - MIC_VIRTIO_RING_ALIGN) + - sizeof(struct _mic_vring_info)); - va = mmap(NULL, MIC_DEVICE_PAGE_END + vr_size * num_vq, - PROT_READ, MAP_SHARED, fd, 0); - if (MAP_FAILED == va) { - mpsslog("%s %s %d mmap failed errno %s\n", - mic->name, __func__, __LINE__, - strerror(errno)); - goto done; - } - set_dp(mic, type, va); - vr0->va = (struct mic_vring *)&va[MIC_DEVICE_PAGE_END]; - vr0->info = vr0->va + - _vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN); - vring_init(&vr0->vr, - MIC_VRING_ENTRIES, vr0->va, MIC_VIRTIO_RING_ALIGN); - mpsslog("%s %s vr0 %p vr0->info %p vr_size 0x%x vring 0x%x ", - __func__, mic->name, vr0->va, vr0->info, vr_size, - _vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN)); - mpsslog("magic 0x%x expected 0x%x\n", - le32toh(vr0->info->magic), MIC_MAGIC + type); - assert(le32toh(vr0->info->magic) == MIC_MAGIC + type); - if (vr1) { - vr1->va = (struct mic_vring *) - &va[MIC_DEVICE_PAGE_END + vr_size]; - vr1->info = vr1->va + _vring_size(MIC_VRING_ENTRIES, - MIC_VIRTIO_RING_ALIGN); - vring_init(&vr1->vr, - MIC_VRING_ENTRIES, vr1->va, MIC_VIRTIO_RING_ALIGN); - mpsslog("%s %s vr1 %p vr1->info %p vr_size 0x%x vring 0x%x ", - __func__, mic->name, vr1->va, vr1->info, vr_size, - _vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN)); - mpsslog("magic 0x%x expected 0x%x\n", - le32toh(vr1->info->magic), MIC_MAGIC + type + 1); - assert(le32toh(vr1->info->magic) == MIC_MAGIC + type + 1); - } -done: - return va; -} - -static int -wait_for_card_driver(struct mic_info *mic, int fd, int type) -{ - struct pollfd pollfd; - int err; - struct mic_device_desc *desc = get_device_desc(mic, type); - __u8 prev_status; - - if (!desc) - return -ENODEV; - prev_status = desc->status; - pollfd.fd = fd; - mpsslog("%s %s Waiting .... desc-> type %d status 0x%x\n", - mic->name, __func__, type, desc->status); - - while (1) { - pollfd.events = POLLIN; - pollfd.revents = 0; - err = poll(&pollfd, 1, -1); - if (err < 0) { - mpsslog("%s %s poll failed %s\n", - mic->name, __func__, strerror(errno)); - continue; - } - - if (pollfd.revents) { - if (desc->status != prev_status) { - mpsslog("%s %s Waiting... desc-> type %d " - "status 0x%x\n", - mic->name, __func__, type, - desc->status); - prev_status = desc->status; - } - if (desc->status & VIRTIO_CONFIG_S_DRIVER_OK) { - mpsslog("%s %s poll.revents %d\n", - mic->name, __func__, pollfd.revents); - mpsslog("%s %s desc-> type %d status 0x%x\n", - mic->name, __func__, type, - desc->status); - break; - } - } - } - return 0; -} - -/* Spin till we have some descriptors */ -static void -spin_for_descriptors(struct mic_info *mic, struct mic_vring *vr) -{ - __u16 avail_idx = read_avail_idx(vr); - - while (avail_idx == le16toh(READ_ONCE(vr->vr.avail->idx))) { -#ifdef DEBUG - mpsslog("%s %s waiting for desc avail %d info_avail %d\n", - mic->name, __func__, - le16toh(vr->vr.avail->idx), vr->info->avail_idx); -#endif - sched_yield(); - } -} - -static void * -virtio_net(void *arg) -{ - static __u8 vnet_hdr[2][sizeof(struct virtio_net_hdr)]; - static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __attribute__ ((aligned(64))); - struct iovec vnet_iov[2][2] = { - { { .iov_base = vnet_hdr[0], .iov_len = sizeof(vnet_hdr[0]) }, - { .iov_base = vnet_buf[0], .iov_len = sizeof(vnet_buf[0]) } }, - { { .iov_base = vnet_hdr[1], .iov_len = sizeof(vnet_hdr[1]) }, - { .iov_base = vnet_buf[1], .iov_len = sizeof(vnet_buf[1]) } }, - }; - struct iovec *iov0 = vnet_iov[0], *iov1 = vnet_iov[1]; - struct mic_info *mic = (struct mic_info *)arg; - char if_name[IFNAMSIZ]; - struct pollfd net_poll[MAX_NET_FD]; - struct mic_vring tx_vr, rx_vr; - struct mic_copy_desc copy; - struct mic_device_desc *desc; - int err; - - snprintf(if_name, IFNAMSIZ, "mic%d", mic->id); - mic->mic_net.tap_fd = tun_alloc(mic, if_name); - if (mic->mic_net.tap_fd < 0) - goto done; - - if (tap_configure(mic, if_name)) - goto done; - mpsslog("MIC name %s id %d\n", mic->name, mic->id); - - net_poll[NET_FD_VIRTIO_NET].fd = mic->mic_net.virtio_net_fd; - net_poll[NET_FD_VIRTIO_NET].events = POLLIN; - net_poll[NET_FD_TUN].fd = mic->mic_net.tap_fd; - net_poll[NET_FD_TUN].events = POLLIN; - - if (MAP_FAILED == init_vr(mic, mic->mic_net.virtio_net_fd, - VIRTIO_ID_NET, &tx_vr, &rx_vr, - virtnet_dev_page.dd.num_vq)) { - mpsslog("%s init_vr failed %s\n", - mic->name, strerror(errno)); - goto done; - } - - copy.iovcnt = 2; - desc = get_device_desc(mic, VIRTIO_ID_NET); - - while (1) { - ssize_t len; - - net_poll[NET_FD_VIRTIO_NET].revents = 0; - net_poll[NET_FD_TUN].revents = 0; - - /* Start polling for data from tap and virtio net */ - err = poll(net_poll, 2, -1); - if (err < 0) { - mpsslog("%s poll failed %s\n", - __func__, strerror(errno)); - continue; - } - if (!(desc->status & VIRTIO_CONFIG_S_DRIVER_OK)) { - err = wait_for_card_driver(mic, - mic->mic_net.virtio_net_fd, - VIRTIO_ID_NET); - if (err) { - mpsslog("%s %s %d Exiting...\n", - mic->name, __func__, __LINE__); - break; - } - } - /* - * Check if there is data to be read from TUN and write to - * virtio net fd if there is. - */ - if (net_poll[NET_FD_TUN].revents & POLLIN) { - copy.iov = iov0; - len = readv(net_poll[NET_FD_TUN].fd, - copy.iov, copy.iovcnt); - if (len > 0) { - struct virtio_net_hdr *hdr - = (struct virtio_net_hdr *)vnet_hdr[0]; - - /* Disable checksums on the card since we are on - a reliable PCIe link */ - hdr->flags |= VIRTIO_NET_HDR_F_DATA_VALID; -#ifdef DEBUG - mpsslog("%s %s %d hdr->flags 0x%x ", mic->name, - __func__, __LINE__, hdr->flags); - mpsslog("copy.out_len %d hdr->gso_type 0x%x\n", - copy.out_len, hdr->gso_type); -#endif -#ifdef DEBUG - disp_iovec(mic, ©, __func__, __LINE__); - mpsslog("%s %s %d read from tap 0x%lx\n", - mic->name, __func__, __LINE__, - len); -#endif - spin_for_descriptors(mic, &tx_vr); - txrx_prepare(VIRTIO_ID_NET, 1, &tx_vr, ©, - len); - - err = mic_virtio_copy(mic, - mic->mic_net.virtio_net_fd, &tx_vr, - ©); - if (err < 0) { - mpsslog("%s %s %d mic_virtio_copy %s\n", - mic->name, __func__, __LINE__, - strerror(errno)); - } - if (!err) - verify_out_len(mic, ©); -#ifdef DEBUG - disp_iovec(mic, ©, __func__, __LINE__); - mpsslog("%s %s %d wrote to net 0x%lx\n", - mic->name, __func__, __LINE__, - sum_iovec_len(©)); -#endif - /* Reinitialize IOV for next run */ - iov0[1].iov_len = MAX_NET_PKT_SIZE; - } else if (len < 0) { - disp_iovec(mic, ©, __func__, __LINE__); - mpsslog("%s %s %d read failed %s ", mic->name, - __func__, __LINE__, strerror(errno)); - mpsslog("cnt %d sum %zd\n", - copy.iovcnt, sum_iovec_len(©)); - } - } - - /* - * Check if there is data to be read from virtio net and - * write to TUN if there is. - */ - if (net_poll[NET_FD_VIRTIO_NET].revents & POLLIN) { - while (rx_vr.info->avail_idx != - le16toh(rx_vr.vr.avail->idx)) { - copy.iov = iov1; - txrx_prepare(VIRTIO_ID_NET, 0, &rx_vr, ©, - MAX_NET_PKT_SIZE - + sizeof(struct virtio_net_hdr)); - - err = mic_virtio_copy(mic, - mic->mic_net.virtio_net_fd, &rx_vr, - ©); - if (!err) { -#ifdef DEBUG - struct virtio_net_hdr *hdr - = (struct virtio_net_hdr *) - vnet_hdr[1]; - - mpsslog("%s %s %d hdr->flags 0x%x, ", - mic->name, __func__, __LINE__, - hdr->flags); - mpsslog("out_len %d gso_type 0x%x\n", - copy.out_len, - hdr->gso_type); -#endif - /* Set the correct output iov_len */ - iov1[1].iov_len = copy.out_len - - sizeof(struct virtio_net_hdr); - verify_out_len(mic, ©); -#ifdef DEBUG - disp_iovec(mic, ©, __func__, - __LINE__); - mpsslog("%s %s %d ", - mic->name, __func__, __LINE__); - mpsslog("read from net 0x%lx\n", - sum_iovec_len(©)); -#endif - len = writev(net_poll[NET_FD_TUN].fd, - copy.iov, copy.iovcnt); - if (len != sum_iovec_len(©)) { - mpsslog("Tun write failed %s ", - strerror(errno)); - mpsslog("len 0x%zx ", len); - mpsslog("read_len 0x%zx\n", - sum_iovec_len(©)); - } else { -#ifdef DEBUG - disp_iovec(mic, ©, __func__, - __LINE__); - mpsslog("%s %s %d ", - mic->name, __func__, - __LINE__); - mpsslog("wrote to tap 0x%lx\n", - len); -#endif - } - } else { - mpsslog("%s %s %d mic_virtio_copy %s\n", - mic->name, __func__, __LINE__, - strerror(errno)); - break; - } - } - } - if (net_poll[NET_FD_VIRTIO_NET].revents & POLLERR) - mpsslog("%s: %s: POLLERR\n", __func__, mic->name); - } -done: - pthread_exit(NULL); -} - -/* virtio_console */ -#define VIRTIO_CONSOLE_FD 0 -#define MONITOR_FD (VIRTIO_CONSOLE_FD + 1) -#define MAX_CONSOLE_FD (MONITOR_FD + 1) /* must be the last one + 1 */ -#define MAX_BUFFER_SIZE PAGE_SIZE - -static void * -virtio_console(void *arg) -{ - static __u8 vcons_buf[2][PAGE_SIZE]; - struct iovec vcons_iov[2] = { - { .iov_base = vcons_buf[0], .iov_len = sizeof(vcons_buf[0]) }, - { .iov_base = vcons_buf[1], .iov_len = sizeof(vcons_buf[1]) }, - }; - struct iovec *iov0 = &vcons_iov[0], *iov1 = &vcons_iov[1]; - struct mic_info *mic = (struct mic_info *)arg; - int err; - struct pollfd console_poll[MAX_CONSOLE_FD]; - int pty_fd; - char *pts_name; - ssize_t len; - struct mic_vring tx_vr, rx_vr; - struct mic_copy_desc copy; - struct mic_device_desc *desc; - - pty_fd = posix_openpt(O_RDWR); - if (pty_fd < 0) { - mpsslog("can't open a pseudoterminal master device: %s\n", - strerror(errno)); - goto _return; - } - pts_name = ptsname(pty_fd); - if (pts_name == NULL) { - mpsslog("can't get pts name\n"); - goto _close_pty; - } - printf("%s console message goes to %s\n", mic->name, pts_name); - mpsslog("%s console message goes to %s\n", mic->name, pts_name); - err = grantpt(pty_fd); - if (err < 0) { - mpsslog("can't grant access: %s %s\n", - pts_name, strerror(errno)); - goto _close_pty; - } - err = unlockpt(pty_fd); - if (err < 0) { - mpsslog("can't unlock a pseudoterminal: %s %s\n", - pts_name, strerror(errno)); - goto _close_pty; - } - console_poll[MONITOR_FD].fd = pty_fd; - console_poll[MONITOR_FD].events = POLLIN; - - console_poll[VIRTIO_CONSOLE_FD].fd = mic->mic_console.virtio_console_fd; - console_poll[VIRTIO_CONSOLE_FD].events = POLLIN; - - if (MAP_FAILED == init_vr(mic, mic->mic_console.virtio_console_fd, - VIRTIO_ID_CONSOLE, &tx_vr, &rx_vr, - virtcons_dev_page.dd.num_vq)) { - mpsslog("%s init_vr failed %s\n", - mic->name, strerror(errno)); - goto _close_pty; - } - - copy.iovcnt = 1; - desc = get_device_desc(mic, VIRTIO_ID_CONSOLE); - - for (;;) { - console_poll[MONITOR_FD].revents = 0; - console_poll[VIRTIO_CONSOLE_FD].revents = 0; - err = poll(console_poll, MAX_CONSOLE_FD, -1); - if (err < 0) { - mpsslog("%s %d: poll failed: %s\n", __func__, __LINE__, - strerror(errno)); - continue; - } - if (!(desc->status & VIRTIO_CONFIG_S_DRIVER_OK)) { - err = wait_for_card_driver(mic, - mic->mic_console.virtio_console_fd, - VIRTIO_ID_CONSOLE); - if (err) { - mpsslog("%s %s %d Exiting...\n", - mic->name, __func__, __LINE__); - break; - } - } - - if (console_poll[MONITOR_FD].revents & POLLIN) { - copy.iov = iov0; - len = readv(pty_fd, copy.iov, copy.iovcnt); - if (len > 0) { -#ifdef DEBUG - disp_iovec(mic, ©, __func__, __LINE__); - mpsslog("%s %s %d read from tap 0x%lx\n", - mic->name, __func__, __LINE__, - len); -#endif - spin_for_descriptors(mic, &tx_vr); - txrx_prepare(VIRTIO_ID_CONSOLE, 1, &tx_vr, - ©, len); - - err = mic_virtio_copy(mic, - mic->mic_console.virtio_console_fd, - &tx_vr, ©); - if (err < 0) { - mpsslog("%s %s %d mic_virtio_copy %s\n", - mic->name, __func__, __LINE__, - strerror(errno)); - } - if (!err) - verify_out_len(mic, ©); -#ifdef DEBUG - disp_iovec(mic, ©, __func__, __LINE__); - mpsslog("%s %s %d wrote to net 0x%lx\n", - mic->name, __func__, __LINE__, - sum_iovec_len(©)); -#endif - /* Reinitialize IOV for next run */ - iov0->iov_len = PAGE_SIZE; - } else if (len < 0) { - disp_iovec(mic, ©, __func__, __LINE__); - mpsslog("%s %s %d read failed %s ", - mic->name, __func__, __LINE__, - strerror(errno)); - mpsslog("cnt %d sum %zd\n", - copy.iovcnt, sum_iovec_len(©)); - } - } - - if (console_poll[VIRTIO_CONSOLE_FD].revents & POLLIN) { - while (rx_vr.info->avail_idx != - le16toh(rx_vr.vr.avail->idx)) { - copy.iov = iov1; - txrx_prepare(VIRTIO_ID_CONSOLE, 0, &rx_vr, - ©, PAGE_SIZE); - - err = mic_virtio_copy(mic, - mic->mic_console.virtio_console_fd, - &rx_vr, ©); - if (!err) { - /* Set the correct output iov_len */ - iov1->iov_len = copy.out_len; - verify_out_len(mic, ©); -#ifdef DEBUG - disp_iovec(mic, ©, __func__, - __LINE__); - mpsslog("%s %s %d ", - mic->name, __func__, __LINE__); - mpsslog("read from net 0x%lx\n", - sum_iovec_len(©)); -#endif - len = writev(pty_fd, - copy.iov, copy.iovcnt); - if (len != sum_iovec_len(©)) { - mpsslog("Tun write failed %s ", - strerror(errno)); - mpsslog("len 0x%zx ", len); - mpsslog("read_len 0x%zx\n", - sum_iovec_len(©)); - } else { -#ifdef DEBUG - disp_iovec(mic, ©, __func__, - __LINE__); - mpsslog("%s %s %d ", - mic->name, __func__, - __LINE__); - mpsslog("wrote to tap 0x%lx\n", - len); -#endif - } - } else { - mpsslog("%s %s %d mic_virtio_copy %s\n", - mic->name, __func__, __LINE__, - strerror(errno)); - break; - } - } - } - if (console_poll[NET_FD_VIRTIO_NET].revents & POLLERR) - mpsslog("%s: %s: POLLERR\n", __func__, mic->name); - } -_close_pty: - close(pty_fd); -_return: - pthread_exit(NULL); -} - -static void -add_virtio_device(struct mic_info *mic, struct mic_device_desc *dd) -{ - char path[PATH_MAX]; - int fd, err; - - snprintf(path, PATH_MAX, "/dev/vop_virtio%d", mic->id); - fd = open(path, O_RDWR); - if (fd < 0) { - mpsslog("Could not open %s %s\n", path, strerror(errno)); - return; - } - - err = ioctl(fd, MIC_VIRTIO_ADD_DEVICE, dd); - if (err < 0) { - mpsslog("Could not add %d %s\n", dd->type, strerror(errno)); - close(fd); - return; - } - switch (dd->type) { - case VIRTIO_ID_NET: - mic->mic_net.virtio_net_fd = fd; - mpsslog("Added VIRTIO_ID_NET for %s\n", mic->name); - break; - case VIRTIO_ID_CONSOLE: - mic->mic_console.virtio_console_fd = fd; - mpsslog("Added VIRTIO_ID_CONSOLE for %s\n", mic->name); - break; - case VIRTIO_ID_BLOCK: - mic->mic_virtblk.virtio_block_fd = fd; - mpsslog("Added VIRTIO_ID_BLOCK for %s\n", mic->name); - break; - } -} - -static bool -set_backend_file(struct mic_info *mic) -{ - FILE *config; - char buff[PATH_MAX], *line, *evv, *p; - - snprintf(buff, PATH_MAX, "%s/mpssd%03d.conf", mic_config_dir, mic->id); - config = fopen(buff, "r"); - if (config == NULL) - return false; - do { /* look for "virtblk_backend=XXXX" */ - line = fgets(buff, PATH_MAX, config); - if (line == NULL) - break; - if (*line == '#') - continue; - p = strchr(line, '\n'); - if (p) - *p = '\0'; - } while (strncmp(line, virtblk_backend, strlen(virtblk_backend)) != 0); - fclose(config); - if (line == NULL) - return false; - evv = strchr(line, '='); - if (evv == NULL) - return false; - mic->mic_virtblk.backend_file = malloc(strlen(evv) + 1); - if (mic->mic_virtblk.backend_file == NULL) { - mpsslog("%s %d can't allocate memory\n", mic->name, mic->id); - return false; - } - strcpy(mic->mic_virtblk.backend_file, evv + 1); - return true; -} - -#define SECTOR_SIZE 512 -static bool -set_backend_size(struct mic_info *mic) -{ - mic->mic_virtblk.backend_size = lseek(mic->mic_virtblk.backend, 0, - SEEK_END); - if (mic->mic_virtblk.backend_size < 0) { - mpsslog("%s: can't seek: %s\n", - mic->name, mic->mic_virtblk.backend_file); - return false; - } - virtblk_dev_page.blk_config.capacity = - mic->mic_virtblk.backend_size / SECTOR_SIZE; - if ((mic->mic_virtblk.backend_size % SECTOR_SIZE) != 0) - virtblk_dev_page.blk_config.capacity++; - - virtblk_dev_page.blk_config.capacity = - htole64(virtblk_dev_page.blk_config.capacity); - - return true; -} - -static bool -open_backend(struct mic_info *mic) -{ - if (!set_backend_file(mic)) - goto _error_exit; - mic->mic_virtblk.backend = open(mic->mic_virtblk.backend_file, O_RDWR); - if (mic->mic_virtblk.backend < 0) { - mpsslog("%s: can't open: %s\n", mic->name, - mic->mic_virtblk.backend_file); - goto _error_free; - } - if (!set_backend_size(mic)) - goto _error_close; - mic->mic_virtblk.backend_addr = mmap(NULL, - mic->mic_virtblk.backend_size, - PROT_READ|PROT_WRITE, MAP_SHARED, - mic->mic_virtblk.backend, 0L); - if (mic->mic_virtblk.backend_addr == MAP_FAILED) { - mpsslog("%s: can't map: %s %s\n", - mic->name, mic->mic_virtblk.backend_file, - strerror(errno)); - goto _error_close; - } - return true; - - _error_close: - close(mic->mic_virtblk.backend); - _error_free: - free(mic->mic_virtblk.backend_file); - _error_exit: - return false; -} - -static void -close_backend(struct mic_info *mic) -{ - munmap(mic->mic_virtblk.backend_addr, mic->mic_virtblk.backend_size); - close(mic->mic_virtblk.backend); - free(mic->mic_virtblk.backend_file); -} - -static bool -start_virtblk(struct mic_info *mic, struct mic_vring *vring) -{ - if (((unsigned long)&virtblk_dev_page.blk_config % 8) != 0) { - mpsslog("%s: blk_config is not 8 byte aligned.\n", - mic->name); - return false; - } - add_virtio_device(mic, &virtblk_dev_page.dd); - if (MAP_FAILED == init_vr(mic, mic->mic_virtblk.virtio_block_fd, - VIRTIO_ID_BLOCK, vring, NULL, - virtblk_dev_page.dd.num_vq)) { - mpsslog("%s init_vr failed %s\n", - mic->name, strerror(errno)); - return false; - } - return true; -} - -static void -stop_virtblk(struct mic_info *mic) -{ - int vr_size, ret; - - vr_size = PAGE_ALIGN(_vring_size(MIC_VRING_ENTRIES, - MIC_VIRTIO_RING_ALIGN) + - sizeof(struct _mic_vring_info)); - ret = munmap(mic->mic_virtblk.block_dp, - MIC_DEVICE_PAGE_END + vr_size * virtblk_dev_page.dd.num_vq); - if (ret < 0) - mpsslog("%s munmap errno %d\n", mic->name, errno); - close(mic->mic_virtblk.virtio_block_fd); -} - -static __u8 -header_error_check(struct vring_desc *desc) -{ - if (le32toh(desc->len) != sizeof(struct virtio_blk_outhdr)) { - mpsslog("%s() %d: length is not sizeof(virtio_blk_outhd)\n", - __func__, __LINE__); - return -EIO; - } - if (!(le16toh(desc->flags) & VRING_DESC_F_NEXT)) { - mpsslog("%s() %d: alone\n", - __func__, __LINE__); - return -EIO; - } - if (le16toh(desc->flags) & VRING_DESC_F_WRITE) { - mpsslog("%s() %d: not read\n", - __func__, __LINE__); - return -EIO; - } - return 0; -} - -static int -read_header(int fd, struct virtio_blk_outhdr *hdr, __u32 desc_idx) -{ - struct iovec iovec; - struct mic_copy_desc copy; - - iovec.iov_len = sizeof(*hdr); - iovec.iov_base = hdr; - copy.iov = &iovec; - copy.iovcnt = 1; - copy.vr_idx = 0; /* only one vring on virtio_block */ - copy.update_used = false; /* do not update used index */ - return ioctl(fd, MIC_VIRTIO_COPY_DESC, ©); -} - -static int -transfer_blocks(int fd, struct iovec *iovec, __u32 iovcnt) -{ - struct mic_copy_desc copy; - - copy.iov = iovec; - copy.iovcnt = iovcnt; - copy.vr_idx = 0; /* only one vring on virtio_block */ - copy.update_used = false; /* do not update used index */ - return ioctl(fd, MIC_VIRTIO_COPY_DESC, ©); -} - -static __u8 -status_error_check(struct vring_desc *desc) -{ - if (le32toh(desc->len) != sizeof(__u8)) { - mpsslog("%s() %d: length is not sizeof(status)\n", - __func__, __LINE__); - return -EIO; - } - return 0; -} - -static int -write_status(int fd, __u8 *status) -{ - struct iovec iovec; - struct mic_copy_desc copy; - - iovec.iov_base = status; - iovec.iov_len = sizeof(*status); - copy.iov = &iovec; - copy.iovcnt = 1; - copy.vr_idx = 0; /* only one vring on virtio_block */ - copy.update_used = true; /* Update used index */ - return ioctl(fd, MIC_VIRTIO_COPY_DESC, ©); -} - -#ifndef VIRTIO_BLK_T_GET_ID -#define VIRTIO_BLK_T_GET_ID 8 -#endif - -static void * -virtio_block(void *arg) -{ - struct mic_info *mic = (struct mic_info *)arg; - int ret; - struct pollfd block_poll; - struct mic_vring vring; - __u16 avail_idx; - __u32 desc_idx; - struct vring_desc *desc; - struct iovec *iovec, *piov; - __u8 status; - __u32 buffer_desc_idx; - struct virtio_blk_outhdr hdr; - void *fos; - - for (;;) { /* forever */ - if (!open_backend(mic)) { /* No virtblk */ - for (mic->mic_virtblk.signaled = 0; - !mic->mic_virtblk.signaled;) - sleep(1); - continue; - } - - /* backend file is specified. */ - if (!start_virtblk(mic, &vring)) - goto _close_backend; - iovec = malloc(sizeof(*iovec) * - le32toh(virtblk_dev_page.blk_config.seg_max)); - if (!iovec) { - mpsslog("%s: can't alloc iovec: %s\n", - mic->name, strerror(ENOMEM)); - goto _stop_virtblk; - } - - block_poll.fd = mic->mic_virtblk.virtio_block_fd; - block_poll.events = POLLIN; - for (mic->mic_virtblk.signaled = 0; - !mic->mic_virtblk.signaled;) { - block_poll.revents = 0; - /* timeout in 1 sec to see signaled */ - ret = poll(&block_poll, 1, 1000); - if (ret < 0) { - mpsslog("%s %d: poll failed: %s\n", - __func__, __LINE__, - strerror(errno)); - continue; - } - - if (!(block_poll.revents & POLLIN)) { -#ifdef DEBUG - mpsslog("%s %d: block_poll.revents=0x%x\n", - __func__, __LINE__, block_poll.revents); -#endif - continue; - } - - /* POLLIN */ - while (vring.info->avail_idx != - le16toh(vring.vr.avail->idx)) { - /* read header element */ - avail_idx = - vring.info->avail_idx & - (vring.vr.num - 1); - desc_idx = le16toh( - vring.vr.avail->ring[avail_idx]); - desc = &vring.vr.desc[desc_idx]; -#ifdef DEBUG - mpsslog("%s() %d: avail_idx=%d ", - __func__, __LINE__, - vring.info->avail_idx); - mpsslog("vring.vr.num=%d desc=%p\n", - vring.vr.num, desc); -#endif - status = header_error_check(desc); - ret = read_header( - mic->mic_virtblk.virtio_block_fd, - &hdr, desc_idx); - if (ret < 0) { - mpsslog("%s() %d %s: ret=%d %s\n", - __func__, __LINE__, - mic->name, ret, - strerror(errno)); - break; - } - /* buffer element */ - piov = iovec; - status = 0; - fos = mic->mic_virtblk.backend_addr + - (hdr.sector * SECTOR_SIZE); - buffer_desc_idx = next_desc(desc); - desc_idx = buffer_desc_idx; - for (desc = &vring.vr.desc[buffer_desc_idx]; - desc->flags & VRING_DESC_F_NEXT; - desc_idx = next_desc(desc), - desc = &vring.vr.desc[desc_idx]) { - piov->iov_len = desc->len; - piov->iov_base = fos; - piov++; - fos += desc->len; - } - /* Returning NULLs for VIRTIO_BLK_T_GET_ID. */ - if (hdr.type & ~(VIRTIO_BLK_T_OUT | - VIRTIO_BLK_T_GET_ID)) { - /* - VIRTIO_BLK_T_IN - does not do - anything. Probably for documenting. - VIRTIO_BLK_T_SCSI_CMD - for - virtio_scsi. - VIRTIO_BLK_T_FLUSH - turned off in - config space. - VIRTIO_BLK_T_BARRIER - defined but not - used in anywhere. - */ - mpsslog("%s() %d: type %x ", - __func__, __LINE__, - hdr.type); - mpsslog("is not supported\n"); - status = -ENOTSUP; - - } else { - ret = transfer_blocks( - mic->mic_virtblk.virtio_block_fd, - iovec, - piov - iovec); - if (ret < 0 && - status != 0) - status = ret; - } - /* write status and update used pointer */ - if (status != 0) - status = status_error_check(desc); - ret = write_status( - mic->mic_virtblk.virtio_block_fd, - &status); -#ifdef DEBUG - mpsslog("%s() %d: write status=%d on desc=%p\n", - __func__, __LINE__, - status, desc); -#endif - } - } - free(iovec); -_stop_virtblk: - stop_virtblk(mic); -_close_backend: - close_backend(mic); - } /* forever */ - - pthread_exit(NULL); -} - -static void -reset(struct mic_info *mic) -{ -#define RESET_TIMEOUT 120 - int i = RESET_TIMEOUT; - setsysfs(mic->name, "state", "reset"); - while (i) { - char *state; - state = readsysfs(mic->name, "state"); - if (!state) - goto retry; - mpsslog("%s: %s %d state %s\n", - mic->name, __func__, __LINE__, state); - - if (!strcmp(state, "ready")) { - free(state); - break; - } - free(state); -retry: - sleep(1); - i--; - } -} - -static int -get_mic_shutdown_status(struct mic_info *mic, char *shutdown_status) -{ - if (!strcmp(shutdown_status, "nop")) - return MIC_NOP; - if (!strcmp(shutdown_status, "crashed")) - return MIC_CRASHED; - if (!strcmp(shutdown_status, "halted")) - return MIC_HALTED; - if (!strcmp(shutdown_status, "poweroff")) - return MIC_POWER_OFF; - if (!strcmp(shutdown_status, "restart")) - return MIC_RESTART; - mpsslog("%s: BUG invalid status %s\n", mic->name, shutdown_status); - /* Invalid state */ - assert(0); -}; - -static int get_mic_state(struct mic_info *mic) -{ - char *state = NULL; - enum mic_states mic_state; - - while (!state) { - state = readsysfs(mic->name, "state"); - sleep(1); - } - mpsslog("%s: %s %d state %s\n", - mic->name, __func__, __LINE__, state); - - if (!strcmp(state, "ready")) { - mic_state = MIC_READY; - } else if (!strcmp(state, "booting")) { - mic_state = MIC_BOOTING; - } else if (!strcmp(state, "online")) { - mic_state = MIC_ONLINE; - } else if (!strcmp(state, "shutting_down")) { - mic_state = MIC_SHUTTING_DOWN; - } else if (!strcmp(state, "reset_failed")) { - mic_state = MIC_RESET_FAILED; - } else if (!strcmp(state, "resetting")) { - mic_state = MIC_RESETTING; - } else { - mpsslog("%s: BUG invalid state %s\n", mic->name, state); - assert(0); - } - - free(state); - return mic_state; -}; - -static void mic_handle_shutdown(struct mic_info *mic) -{ -#define SHUTDOWN_TIMEOUT 60 - int i = SHUTDOWN_TIMEOUT; - char *shutdown_status; - while (i) { - shutdown_status = readsysfs(mic->name, "shutdown_status"); - if (!shutdown_status) { - sleep(1); - continue; - } - mpsslog("%s: %s %d shutdown_status %s\n", - mic->name, __func__, __LINE__, shutdown_status); - switch (get_mic_shutdown_status(mic, shutdown_status)) { - case MIC_RESTART: - mic->restart = 1; - case MIC_HALTED: - case MIC_POWER_OFF: - case MIC_CRASHED: - free(shutdown_status); - goto reset; - default: - break; - } - free(shutdown_status); - sleep(1); - i--; - } -reset: - if (!i) - mpsslog("%s: %s %d timing out waiting for shutdown_status %s\n", - mic->name, __func__, __LINE__, shutdown_status); - reset(mic); -} - -static int open_state_fd(struct mic_info *mic) -{ - char pathname[PATH_MAX]; - int fd; - - snprintf(pathname, PATH_MAX - 1, "%s/%s/%s", - MICSYSFSDIR, mic->name, "state"); - - fd = open(pathname, O_RDONLY); - if (fd < 0) - mpsslog("%s: opening file %s failed %s\n", - mic->name, pathname, strerror(errno)); - return fd; -} - -static int block_till_state_change(int fd, struct mic_info *mic) -{ - struct pollfd ufds[1]; - char value[PAGE_SIZE]; - int ret; - - ufds[0].fd = fd; - ufds[0].events = POLLERR | POLLPRI; - ret = poll(ufds, 1, -1); - if (ret < 0) { - mpsslog("%s: %s %d poll failed %s\n", - mic->name, __func__, __LINE__, strerror(errno)); - return ret; - } - - ret = lseek(fd, 0, SEEK_SET); - if (ret < 0) { - mpsslog("%s: %s %d Failed to seek to 0: %s\n", - mic->name, __func__, __LINE__, strerror(errno)); - return ret; - } - - ret = read(fd, value, sizeof(value)); - if (ret < 0) { - mpsslog("%s: %s %d Failed to read sysfs entry: %s\n", - mic->name, __func__, __LINE__, strerror(errno)); - return ret; - } - - return 0; -} - -static void * -mic_config(void *arg) -{ - struct mic_info *mic = (struct mic_info *)arg; - int fd, ret, stat = 0; - - fd = open_state_fd(mic); - if (fd < 0) { - mpsslog("%s: %s %d open state fd failed %s\n", - mic->name, __func__, __LINE__, strerror(errno)); - goto exit; - } - - do { - ret = block_till_state_change(fd, mic); - if (ret < 0) { - mpsslog("%s: %s %d block_till_state_change error %s\n", - mic->name, __func__, __LINE__, strerror(errno)); - goto close_exit; - } - - switch (get_mic_state(mic)) { - case MIC_SHUTTING_DOWN: - mic_handle_shutdown(mic); - break; - case MIC_READY: - case MIC_RESET_FAILED: - ret = kill(mic->pid, SIGTERM); - mpsslog("%s: %s %d kill pid %d ret %d\n", - mic->name, __func__, __LINE__, - mic->pid, ret); - if (!ret) { - ret = waitpid(mic->pid, &stat, - WIFSIGNALED(stat)); - mpsslog("%s: %s %d waitpid ret %d pid %d\n", - mic->name, __func__, __LINE__, - ret, mic->pid); - } - if (mic->boot_on_resume) { - setsysfs(mic->name, "state", "boot"); - mic->boot_on_resume = 0; - } - goto close_exit; - default: - break; - } - } while (1); - -close_exit: - close(fd); -exit: - init_mic(mic); - pthread_exit(NULL); -} - -static void -set_cmdline(struct mic_info *mic) -{ - char buffer[PATH_MAX]; - int len; - - len = snprintf(buffer, PATH_MAX, - "clocksource=tsc highres=off nohz=off "); - len += snprintf(buffer + len, PATH_MAX - len, - "cpufreq_on;corec6_off;pc3_off;pc6_off "); - len += snprintf(buffer + len, PATH_MAX - len, - "ifcfg=static;address,172.31.%d.1;netmask,255.255.255.0", - mic->id + 1); - - setsysfs(mic->name, "cmdline", buffer); - mpsslog("%s: Command line: \"%s\"\n", mic->name, buffer); - snprintf(buffer, PATH_MAX, "172.31.%d.1", mic->id + 1); - mpsslog("%s: IPADDR: \"%s\"\n", mic->name, buffer); -} - -static void -set_log_buf_info(struct mic_info *mic) -{ - int fd; - off_t len; - char system_map[] = "/lib/firmware/mic/System.map"; - char *map, *temp, log_buf[17] = {'\0'}; - - fd = open(system_map, O_RDONLY); - if (fd < 0) { - mpsslog("%s: Opening System.map failed: %d\n", - mic->name, errno); - return; - } - len = lseek(fd, 0, SEEK_END); - if (len < 0) { - mpsslog("%s: Reading System.map size failed: %d\n", - mic->name, errno); - close(fd); - return; - } - map = mmap(NULL, len, PROT_READ, MAP_PRIVATE, fd, 0); - if (map == MAP_FAILED) { - mpsslog("%s: mmap of System.map failed: %d\n", - mic->name, errno); - close(fd); - return; - } - temp = strstr(map, "__log_buf"); - if (!temp) { - mpsslog("%s: __log_buf not found: %d\n", mic->name, errno); - munmap(map, len); - close(fd); - return; - } - strncpy(log_buf, temp - 19, 16); - setsysfs(mic->name, "log_buf_addr", log_buf); - mpsslog("%s: log_buf_addr: %s\n", mic->name, log_buf); - temp = strstr(map, "log_buf_len"); - if (!temp) { - mpsslog("%s: log_buf_len not found: %d\n", mic->name, errno); - munmap(map, len); - close(fd); - return; - } - strncpy(log_buf, temp - 19, 16); - setsysfs(mic->name, "log_buf_len", log_buf); - mpsslog("%s: log_buf_len: %s\n", mic->name, log_buf); - munmap(map, len); - close(fd); -} - -static void -change_virtblk_backend(int x, siginfo_t *siginfo, void *p) -{ - struct mic_info *mic; - - for (mic = mic_list.next; mic != NULL; mic = mic->next) - mic->mic_virtblk.signaled = 1/* true */; -} - -static void -set_mic_boot_params(struct mic_info *mic) -{ - set_log_buf_info(mic); - set_cmdline(mic); -} - -static void * -init_mic(void *arg) -{ - struct mic_info *mic = (struct mic_info *)arg; - struct sigaction ignore = { - .sa_flags = 0, - .sa_handler = SIG_IGN - }; - struct sigaction act = { - .sa_flags = SA_SIGINFO, - .sa_sigaction = change_virtblk_backend, - }; - char buffer[PATH_MAX]; - int err, fd; - - /* - * Currently, one virtio block device is supported for each MIC card - * at a time. Any user (or test) can send a SIGUSR1 to the MIC daemon. - * The signal informs the virtio block backend about a change in the - * configuration file which specifies the virtio backend file name on - * the host. Virtio block backend then re-reads the configuration file - * and switches to the new block device. This signalling mechanism may - * not be required once multiple virtio block devices are supported by - * the MIC daemon. - */ - sigaction(SIGUSR1, &ignore, NULL); -retry: - fd = open_state_fd(mic); - if (fd < 0) { - mpsslog("%s: %s %d open state fd failed %s\n", - mic->name, __func__, __LINE__, strerror(errno)); - sleep(2); - goto retry; - } - - if (mic->restart) { - snprintf(buffer, PATH_MAX, "boot"); - setsysfs(mic->name, "state", buffer); - mpsslog("%s restarting mic %d\n", - mic->name, mic->restart); - mic->restart = 0; - } - - while (1) { - while (block_till_state_change(fd, mic)) { - mpsslog("%s: %s %d block_till_state_change error %s\n", - mic->name, __func__, __LINE__, strerror(errno)); - sleep(2); - continue; - } - - if (get_mic_state(mic) == MIC_BOOTING) - break; - } - - mic->pid = fork(); - switch (mic->pid) { - case 0: - add_virtio_device(mic, &virtcons_dev_page.dd); - add_virtio_device(mic, &virtnet_dev_page.dd); - err = pthread_create(&mic->mic_console.console_thread, NULL, - virtio_console, mic); - if (err) - mpsslog("%s virtcons pthread_create failed %s\n", - mic->name, strerror(err)); - err = pthread_create(&mic->mic_net.net_thread, NULL, - virtio_net, mic); - if (err) - mpsslog("%s virtnet pthread_create failed %s\n", - mic->name, strerror(err)); - err = pthread_create(&mic->mic_virtblk.block_thread, NULL, - virtio_block, mic); - if (err) - mpsslog("%s virtblk pthread_create failed %s\n", - mic->name, strerror(err)); - sigemptyset(&act.sa_mask); - err = sigaction(SIGUSR1, &act, NULL); - if (err) - mpsslog("%s sigaction SIGUSR1 failed %s\n", - mic->name, strerror(errno)); - while (1) - sleep(60); - case -1: - mpsslog("fork failed MIC name %s id %d errno %d\n", - mic->name, mic->id, errno); - break; - default: - err = pthread_create(&mic->config_thread, NULL, - mic_config, mic); - if (err) - mpsslog("%s mic_config pthread_create failed %s\n", - mic->name, strerror(err)); - } - - return NULL; -} - -static void -start_daemon(void) -{ - struct mic_info *mic; - int err; - - for (mic = mic_list.next; mic; mic = mic->next) { - set_mic_boot_params(mic); - err = pthread_create(&mic->init_thread, NULL, init_mic, mic); - if (err) - mpsslog("%s init_mic pthread_create failed %s\n", - mic->name, strerror(err)); - } - - while (1) - sleep(60); -} - -static int -init_mic_list(void) -{ - struct mic_info *mic = &mic_list; - struct dirent *file; - DIR *dp; - int cnt = 0; - - dp = opendir(MICSYSFSDIR); - if (!dp) - return 0; - - while ((file = readdir(dp)) != NULL) { - if (!strncmp(file->d_name, "mic", 3)) { - mic->next = calloc(1, sizeof(struct mic_info)); - if (mic->next) { - mic = mic->next; - mic->id = atoi(&file->d_name[3]); - mic->name = malloc(strlen(file->d_name) + 16); - if (mic->name) - strcpy(mic->name, file->d_name); - mpsslog("MIC name %s id %d\n", mic->name, - mic->id); - cnt++; - } - } - } - - closedir(dp); - return cnt; -} - -void -mpsslog(char *format, ...) -{ - va_list args; - char buffer[4096]; - char ts[52], *ts1; - time_t t; - - if (logfp == NULL) - return; - - va_start(args, format); - vsprintf(buffer, format, args); - va_end(args); - - time(&t); - ts1 = ctime_r(&t, ts); - ts1[strlen(ts1) - 1] = '\0'; - fprintf(logfp, "%s: %s", ts1, buffer); - - fflush(logfp); -} - -int -main(int argc, char *argv[]) -{ - int cnt; - pid_t pid; - - myname = argv[0]; - - logfp = fopen(LOGFILE_NAME, "a+"); - if (!logfp) { - fprintf(stderr, "cannot open logfile '%s'\n", LOGFILE_NAME); - exit(1); - } - pid = fork(); - switch (pid) { - case 0: - break; - case -1: - exit(2); - default: - exit(0); - } - - mpsslog("MIC Daemon start\n"); - - cnt = init_mic_list(); - if (cnt == 0) { - mpsslog("MIC module not loaded\n"); - exit(3); - } - mpsslog("MIC found %d devices\n", cnt); - - start_daemon(); - - exit(0); -} diff --git a/samples/mic/mpssd/mpssd.h b/samples/mic/mpssd/mpssd.h deleted file mode 100644 index 5f98bdafe653..000000000000 --- a/samples/mic/mpssd/mpssd.h +++ /dev/null @@ -1,89 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Intel MIC User Space Tools. - */ -#ifndef _MPSSD_H_ -#define _MPSSD_H_ - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <fcntl.h> -#include <unistd.h> -#include <dirent.h> -#include <libgen.h> -#include <pthread.h> -#include <stdarg.h> -#include <time.h> -#include <errno.h> -#include <sys/dir.h> -#include <sys/ioctl.h> -#include <sys/poll.h> -#include <sys/types.h> -#include <sys/socket.h> -#include <sys/stat.h> -#include <sys/mman.h> -#include <sys/utsname.h> -#include <sys/wait.h> -#include <netinet/in.h> -#include <arpa/inet.h> -#include <netdb.h> -#include <signal.h> -#include <limits.h> -#include <syslog.h> -#include <getopt.h> -#include <net/if.h> -#include <linux/if_tun.h> -#include <linux/virtio_ids.h> - -#define MICSYSFSDIR "/sys/class/mic" -#define LOGFILE_NAME "/var/log/mpssd" -#define PAGE_SIZE 4096 - -struct mic_console_info { - pthread_t console_thread; - int virtio_console_fd; - void *console_dp; -}; - -struct mic_net_info { - pthread_t net_thread; - int virtio_net_fd; - int tap_fd; - void *net_dp; -}; - -struct mic_virtblk_info { - pthread_t block_thread; - int virtio_block_fd; - void *block_dp; - volatile sig_atomic_t signaled; - char *backend_file; - int backend; - void *backend_addr; - long backend_size; -}; - -struct mic_info { - int id; - char *name; - pthread_t config_thread; - pthread_t init_thread; - pid_t pid; - struct mic_console_info mic_console; - struct mic_net_info mic_net; - struct mic_virtblk_info mic_virtblk; - int restart; - int boot_on_resume; - struct mic_info *next; -}; - -__attribute__((format(printf, 1, 2))) -void mpsslog(char *format, ...); -char *readsysfs(char *dir, char *entry); -int setsysfs(char *dir, char *entry, char *value); -#endif diff --git a/samples/mic/mpssd/sysfs.c b/samples/mic/mpssd/sysfs.c deleted file mode 100644 index 3fb08eb7ed9d..000000000000 --- a/samples/mic/mpssd/sysfs.c +++ /dev/null @@ -1,91 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Intel MIC User Space Tools. - */ - -#include "mpssd.h" - -#define PAGE_SIZE 4096 - -char * -readsysfs(char *dir, char *entry) -{ - char filename[PATH_MAX]; - char value[PAGE_SIZE]; - char *string = NULL; - int fd; - int len; - - if (dir == NULL) - snprintf(filename, PATH_MAX, "%s/%s", MICSYSFSDIR, entry); - else - snprintf(filename, PATH_MAX, - "%s/%s/%s", MICSYSFSDIR, dir, entry); - - fd = open(filename, O_RDONLY); - if (fd < 0) { - mpsslog("Failed to open sysfs entry '%s': %s\n", - filename, strerror(errno)); - return NULL; - } - - len = read(fd, value, sizeof(value)); - if (len < 0) { - mpsslog("Failed to read sysfs entry '%s': %s\n", - filename, strerror(errno)); - goto readsys_ret; - } - if (len == 0) - goto readsys_ret; - - value[len - 1] = '\0'; - - string = malloc(strlen(value) + 1); - if (string) - strcpy(string, value); - -readsys_ret: - close(fd); - return string; -} - -int -setsysfs(char *dir, char *entry, char *value) -{ - char filename[PATH_MAX]; - char *oldvalue; - int fd, ret = 0; - - if (dir == NULL) - snprintf(filename, PATH_MAX, "%s/%s", MICSYSFSDIR, entry); - else - snprintf(filename, PATH_MAX, "%s/%s/%s", - MICSYSFSDIR, dir, entry); - - oldvalue = readsysfs(dir, entry); - - fd = open(filename, O_RDWR); - if (fd < 0) { - ret = errno; - mpsslog("Failed to open sysfs entry '%s': %s\n", - filename, strerror(errno)); - goto done; - } - - if (!oldvalue || strcmp(value, oldvalue)) { - if (write(fd, value, strlen(value)) < 0) { - ret = errno; - mpsslog("Failed to write new sysfs entry '%s': %s\n", - filename, strerror(errno)); - } - } - close(fd); -done: - if (oldvalue) - free(oldvalue); - return ret; -} diff --git a/scripts/get_abi.pl b/scripts/get_abi.pl index c738cb795514..2cb592f8eba4 100755 --- a/scripts/get_abi.pl +++ b/scripts/get_abi.pl @@ -2,18 +2,28 @@ # SPDX-License-Identifier: GPL-2.0 use strict; +use warnings; +use utf8; use Pod::Usage; use Getopt::Long; use File::Find; use Fcntl ':mode'; -my $help; -my $man; -my $debug; +my $help = 0; +my $man = 0; +my $debug = 0; +my $enable_lineno = 0; my $prefix="Documentation/ABI"; +# +# If true, assumes that the description is formatted with ReST +# +my $description_is_rst = 1; + GetOptions( "debug|d+" => \$debug, + "enable-lineno" => \$enable_lineno, + "rst-source!" => \$description_is_rst, "dir=s" => \$prefix, 'help|?' => \$help, man => \$man @@ -32,6 +42,7 @@ pod2usage(2) if ($cmd eq "search" && !$arg); require Data::Dumper if ($debug); my %data; +my %symbols; # # Displays an error message, printing file name and line @@ -39,7 +50,15 @@ my %data; sub parse_error($$$$) { my ($file, $ln, $msg, $data) = @_; - print STDERR "file $file#$ln: $msg at\n\t$data"; + $data =~ s/\s+$/\n/; + + print STDERR "Warning: file $file#$ln:\n\t$msg"; + + if ($data ne "") { + print STDERR ". Line\n\t\t$data"; + } else { + print STDERR "\n"; + } } # @@ -55,24 +74,28 @@ sub parse_abi { my $name = $file; $name =~ s,.*/,,; - my $nametag = "File $name"; + my $fn = $file; + $fn =~ s,Documentation/ABI/,,; + + my $nametag = "File $fn"; $data{$nametag}->{what} = "File $name"; $data{$nametag}->{type} = "File"; $data{$nametag}->{file} = $name; $data{$nametag}->{filepath} = $file; $data{$nametag}->{is_file} = 1; + $data{$nametag}->{line_no} = 1; my $type = $file; $type =~ s,.*/(.*)/.*,$1,; my $what; my $new_what; - my $tag; + my $tag = ""; my $ln; my $xrefs; my $space; my @labels; - my $label; + my $label = ""; print STDERR "Opening $file\n" if ($debug > 1); open IN, $file; @@ -95,16 +118,26 @@ sub parse_abi { # Invalid, but it is a common mistake if ($new_tag eq "where") { - parse_error($file, $ln, "tag 'Where' is invalid. Should be 'What:' instead", $_); + parse_error($file, $ln, "tag 'Where' is invalid. Should be 'What:' instead", ""); $new_tag = "what"; } if ($new_tag =~ m/what/) { $space = ""; + $content =~ s/[,.;]$//; + + push @{$symbols{$content}->{file}}, " $file:" . ($ln - 1); + if ($tag =~ m/what/) { $what .= ", " . $content; } else { - parse_error($file, $ln, "What '$what' doesn't have a description", "") if ($what && !$data{$what}->{description}); + if ($what) { + parse_error($file, $ln, "What '$what' doesn't have a description", "") if (!$data{$what}->{description}); + + foreach my $w(split /, /, $what) { + $symbols{$w}->{xref} = $what; + }; + } $what = $content; $label = $content; @@ -113,7 +146,7 @@ sub parse_abi { push @labels, [($content, $label)]; $tag = $new_tag; - push @{$data{$nametag}->{xrefs}}, [($content, $label)] if ($data{$nametag}->{what}); + push @{$data{$nametag}->{symbols}}, $content if ($data{$nametag}->{what}); next; } @@ -121,30 +154,44 @@ sub parse_abi { $tag = $new_tag; if ($new_what) { - @{$data{$what}->{label}} = @labels if ($data{$nametag}->{what}); + @{$data{$what}->{label_list}} = @labels if ($data{$nametag}->{what}); @labels = (); $label = ""; $new_what = 0; $data{$what}->{type} = $type; - $data{$what}->{file} = $name; - $data{$what}->{filepath} = $file; + if (!defined($data{$what}->{file})) { + $data{$what}->{file} = $name; + $data{$what}->{filepath} = $file; + } else { + if ($name ne $data{$what}->{file}) { + $data{$what}->{file} .= " " . $name; + $data{$what}->{filepath} .= " " . $file; + } + } print STDERR "\twhat: $what\n" if ($debug > 1); + $data{$what}->{line_no} = $ln; + } else { + $data{$what}->{line_no} = $ln if (!defined($data{$what}->{line_no})); } if (!$what) { parse_error($file, $ln, "'What:' should come first:", $_); next; } - if ($tag eq "description") { - next if ($content =~ m/^\s*$/); - if ($content =~ m/^(\s*)(.*)/) { - my $new_content = $2; - $space = $new_tag . $sep . $1; - while ($space =~ s/\t+/' ' x (length($&) * 8 - length($`) % 8)/e) {} - $space =~ s/./ /g; - $data{$what}->{$tag} .= "$new_content\n"; + if ($new_tag eq "description") { + $sep =~ s,:, ,; + $content = ' ' x length($new_tag) . $sep . $content; + while ($content =~ s/\t+/' ' x (length($&) * 8 - length($`) % 8)/e) {} + if ($content =~ m/^(\s*)(\S.*)$/) { + # Preserve initial spaces for the first line + $space = $1; + $content = "$2\n"; + $data{$what}->{$tag} .= $content; + } else { + undef($space); } + } else { $data{$what}->{$tag} = $content; } @@ -159,29 +206,24 @@ sub parse_abi { } if ($tag eq "description") { - if (!$data{$what}->{description}) { - next if (m/^\s*\n/); - if (m/^(\s*)(.*)/) { + my $content = $_; + while ($content =~ s/\t+/' ' x (length($&) * 8 - length($`) % 8)/e) {} + if (m/^\s*\n/) { + $data{$what}->{$tag} .= "\n"; + next; + } + + if (!defined($space)) { + # Preserve initial spaces for the first line + if ($content =~ m/^(\s*)(\S.*)$/) { $space = $1; - while ($space =~ s/\t+/' ' x (length($&) * 8 - length($`) % 8)/e) {} - $data{$what}->{$tag} .= "$2\n"; + $content = "$2\n"; } } else { - my $content = $_; - if (m/^\s*\n/) { - $data{$what}->{$tag} .= $content; - next; - } - - while ($content =~ s/\t+/' ' x (length($&) * 8 - length($`) % 8)/e) {} $space = "" if (!($content =~ s/^($space)//)); - - # Compress spaces with tabs - $content =~ s<^ {8}> <\t>; - $content =~ s<^ {1,7}\t> <\t>; - $content =~ s< {1,7}\t> <\t>; - $data{$what}->{$tag} .= $content; } + $data{$what}->{$tag} .= $content; + next; } if (m/^\s*(.*)/) { @@ -191,32 +233,26 @@ sub parse_abi { } # Everything else is error - parse_error($file, $ln, "Unexpected line:", $_); + parse_error($file, $ln, "Unexpected content", $_); + } + $data{$nametag}->{description} =~ s/^\n+// if ($data{$nametag}->{description}); + if ($what) { + parse_error($file, $ln, "What '$what' doesn't have a description", "") if (!$data{$what}->{description}); + + foreach my $w(split /, /,$what) { + $symbols{$w}->{xref} = $what; + }; } - $data{$nametag}->{description} =~ s/^\n+//; close IN; } -# -# Outputs the book on ReST format -# - -my %labels; - -sub output_rest { - foreach my $what (sort { - ($data{$a}->{type} eq "File") cmp ($data{$b}->{type} eq "File") || - $a cmp $b - } keys %data) { - my $type = $data{$what}->{type}; - my $file = $data{$what}->{file}; - my $filepath = $data{$what}->{filepath}; - - my $w = $what; - $w =~ s/([\(\)\_\-\*\=\^\~\\])/\\$1/g; +sub create_labels { + my %labels; + foreach my $what (keys %data) { + next if ($data{$what}->{file} eq "File"); - foreach my $p (@{$data{$what}->{label}}) { + foreach my $p (@{$data{$what}->{label_list}}) { my ($content, $label) = @{$p}; $label = "abi_" . $label . " "; $label =~ tr/A-Z/a-z/; @@ -233,81 +269,144 @@ sub output_rest { } $labels{$label} = 1; - $data{$what}->{label} .= $label; - - printf ".. _%s:\n\n", $label; + $data{$what}->{label} = $label; # only one label is enough last; } + } +} +# +# Outputs the book on ReST format +# - $filepath =~ s,.*/(.*/.*),\1,;; - $filepath =~ s,[/\-],_,g;; - my $fileref = "abi_file_".$filepath; +# \b doesn't work well with paths. So, we need to define something else +my $bondary = qr { (?<![\w\/\`\{])(?=[\w\/\`\{])|(?<=[\w\/\`\{])(?![\w\/\`\{]) }x; - if ($type eq "File") { - my $bar = $w; - $bar =~ s/./-/g; +sub output_rest { + create_labels(); - print ".. _$fileref:\n\n"; - print "$w\n$bar\n\n"; - } else { - my @names = split /\s*,\s*/,$w; + foreach my $what (sort { + ($data{$a}->{type} eq "File") cmp ($data{$b}->{type} eq "File") || + $a cmp $b + } keys %data) { + my $type = $data{$what}->{type}; + + my @file = split / /, $data{$what}->{file}; + my @filepath = split / /, $data{$what}->{filepath}; + + if ($enable_lineno) { + printf "#define LINENO %s%s#%s\n\n", + $prefix, $file[0], + $data{$what}->{line_no}; + } + my $w = $what; + $w =~ s/([\(\)\_\-\*\=\^\~\\])/\\$1/g; + + if ($type ne "File") { + printf ".. _%s:\n\n", $data{$what}->{label}; + + my @names = split /, /,$w; my $len = 0; foreach my $name (@names) { + $name = "**$name**"; $len = length($name) if (length($name) > $len); } - print "What:\n\n"; - print "+-" . "-" x $len . "-+\n"; foreach my $name (@names) { printf "| %s", $name . " " x ($len - length($name)) . " |\n"; print "+-" . "-" x $len . "-+\n"; } + print "\n"; } - print "Defined on file :ref:`$file <$fileref>`\n\n" if ($type ne "File"); + for (my $i = 0; $i < scalar(@filepath); $i++) { + my $path = $filepath[$i]; + my $f = $file[$i]; - my $desc = $data{$what}->{description}; - $desc =~ s/^\s+//; + $path =~ s,.*/(.*/.*),$1,;; + $path =~ s,[/\-],_,g;; + my $fileref = "abi_file_".$path; - # Remove title markups from the description, as they won't work - $desc =~ s/\n[\-\*\=\^\~]+\n/\n/g; + if ($type eq "File") { + print ".. _$fileref:\n\n"; + } else { + print "Defined on file :ref:`$f <$fileref>`\n\n"; + } + } + + if ($type eq "File") { + my $bar = $w; + $bar =~ s/./-/g; + print "$w\n$bar\n\n"; + } + + my $desc = ""; + $desc = $data{$what}->{description} if (defined($data{$what}->{description})); + $desc =~ s/\s+$/\n/; if (!($desc =~ /^\s*$/)) { - if ($desc =~ m/\:\n/ || $desc =~ m/\n[\t ]+/ || $desc =~ m/[\x00-\x08\x0b-\x1f\x7b-\xff]/) { - # put everything inside a code block - $desc =~ s/\n/\n /g; + if ($description_is_rst) { + # Enrich text by creating cross-references + + $desc =~ s,Documentation/(?!devicetree)(\S+)\.rst,:doc:`/$1`,g; + + my @matches = $desc =~ m,Documentation/ABI/([\w\/\-]+),; + foreach my $f (@matches) { + my $xref = $f; + my $path = $f; + $path =~ s,.*/(.*/.*),$1,;; + $path =~ s,[/\-],_,g;; + $xref .= " <abi_file_" . $path . ">"; + $desc =~ s,\bDocumentation/ABI/$f\b,:ref:`$xref`,g; + } - print "::\n\n"; - print " $desc\n\n"; - } else { - # Escape any special chars from description - $desc =~s/([\x00-\x08\x0b-\x1f\x21-\x2a\x2d\x2f\x3c-\x40\x5c\x5e-\x60\x7b-\xff])/\\$1/g; + @matches = $desc =~ m,$bondary(/sys/[^\s\.\,\;\:\*\s\`\'\(\)]+)$bondary,; + + foreach my $s (@matches) { + if (defined($data{$s}) && defined($data{$s}->{label})) { + my $xref = $s; + + $xref =~ s/([\x00-\x1f\x21-\x2f\x3a-\x40\x7b-\xff])/\\$1/g; + $xref = ":ref:`$xref <" . $data{$s}->{label} . ">`"; + + $desc =~ s,$bondary$s$bondary,$xref,g; + } + } print "$desc\n\n"; + } else { + $desc =~ s/^\s+//; + + # Remove title markups from the description, as they won't work + $desc =~ s/\n[\-\*\=\^\~]+\n/\n\n/g; + + if ($desc =~ m/\:\n/ || $desc =~ m/\n[\t ]+/ || $desc =~ m/[\x00-\x08\x0b-\x1f\x7b-\xff]/) { + # put everything inside a code block + $desc =~ s/\n/\n /g; + + print "::\n\n"; + print " $desc\n\n"; + } else { + # Escape any special chars from description + $desc =~s/([\x00-\x08\x0b-\x1f\x21-\x2a\x2d\x2f\x3c-\x40\x5c\x5e-\x60\x7b-\xff])/\\$1/g; + print "$desc\n\n"; + } } } else { print "DESCRIPTION MISSING for $what\n\n" if (!$data{$what}->{is_file}); } - if ($data{$what}->{xrefs}) { + if ($data{$what}->{symbols}) { printf "Has the following ABI:\n\n"; - foreach my $p(@{$data{$what}->{xrefs}}) { - my ($content, $label) = @{$p}; - $label = "abi_" . $label . " "; - $label =~ tr/A-Z/a-z/; - - # Convert special chars to "_" - $label =~s/([\x00-\x2f\x3a-\x40\x5b-\x60\x7b-\xff])/_/g; - $label =~ s,_+,_,g; - $label =~ s,_$,,; + foreach my $content(@{$data{$what}->{symbols}}) { + my $label = $data{$symbols{$content}->{xref}}->{label}; # Escape special chars from content $content =~s/([\x00-\x1f\x21-\x2f\x3a-\x40\x7b-\xff])/\\$1/g; @@ -315,6 +414,14 @@ sub output_rest { print "- :ref:`$content <$label>`\n\n"; } } + + if (defined($data{$what}->{users})) { + my $users = $data{$what}->{users}; + + $users =~ s/\n/\n\t/g; + printf "Users:\n\t%s\n\n", $users if ($users ne ""); + } + } } @@ -335,27 +442,34 @@ sub search_symbols { print "\n$what\n$bar\n\n"; - my $kernelversion = $data{$what}->{kernelversion}; - my $contact = $data{$what}->{contact}; - my $users = $data{$what}->{users}; - my $date = $data{$what}->{date}; - my $desc = $data{$what}->{description}; - $kernelversion =~ s/^\s+//; - $contact =~ s/^\s+//; - $users =~ s/^\s+//; - $users =~ s/\n//g; - $date =~ s/^\s+//; - $desc =~ s/^\s+//; + my $kernelversion = $data{$what}->{kernelversion} if (defined($data{$what}->{kernelversion})); + my $contact = $data{$what}->{contact} if (defined($data{$what}->{contact})); + my $users = $data{$what}->{users} if (defined($data{$what}->{users})); + my $date = $data{$what}->{date} if (defined($data{$what}->{date})); + my $desc = $data{$what}->{description} if (defined($data{$what}->{description})); + + $kernelversion =~ s/^\s+// if ($kernelversion); + $contact =~ s/^\s+// if ($contact); + if ($users) { + $users =~ s/^\s+//; + $users =~ s/\n//g; + } + $date =~ s/^\s+// if ($date); + $desc =~ s/^\s+// if ($desc); printf "Kernel version:\t\t%s\n", $kernelversion if ($kernelversion); printf "Date:\t\t\t%s\n", $date if ($date); printf "Contact:\t\t%s\n", $contact if ($contact); printf "Users:\t\t\t%s\n", $users if ($users); - print "Defined on file:\t$file\n\n"; + print "Defined on file(s):\t$file\n\n"; print "Description:\n\n$desc"; } } +# Ensure that the prefix will always end with a slash +# While this is not needed for find, it makes the patch nicer +# with --enable-lineno +$prefix =~ s,/?$,/,; # # Parses all ABI files located at $prefix dir @@ -367,12 +481,23 @@ print STDERR Data::Dumper->Dump([\%data], [qw(*data)]) if ($debug); # # Handles the command # -if ($cmd eq "rest") { - output_rest; -} elsif ($cmd eq "search") { +if ($cmd eq "search") { search_symbols; -} +} else { + if ($cmd eq "rest") { + output_rest; + } + + # Warn about duplicated ABI entries + foreach my $what(sort keys %symbols) { + my @files = @{$symbols{$what}->{file}}; + next if (scalar(@files) == 1); + + printf STDERR "Warning: $what is defined %d times: @files\n", + scalar(@files); + } +} __END__ @@ -382,7 +507,8 @@ abi_book.pl - parse the Linux ABI files and produce a ReST book. =head1 SYNOPSIS -B<abi_book.pl> [--debug] [--man] [--help] [--dir=<dir>] <COMAND> [<ARGUMENT>] +B<abi_book.pl> [--debug] [--enable-lineno] [--man] [--help] + [--(no-)rst-source] [--dir=<dir>] <COMAND> [<ARGUMENT>] Where <COMMAND> can be: @@ -405,6 +531,17 @@ B<validate> - validate the ABI contents Changes the location of the ABI search. By default, it uses the Documentation/ABI directory. +=item B<--rst-source> and B<--no-rst-source> + +The input file may be using ReST syntax or not. Those two options allow +selecting between a rst-compliant source ABI (--rst-source), or a +plain text that may be violating ReST spec, so it requres some escaping +logic (--no-rst-source). + +=item B<--enable-lineno> + +Enable output of #define LINENO lines. + =item B<--debug> Put the script in verbose mode, useful for debugging. Can be called multiple diff --git a/scripts/kernel-doc b/scripts/kernel-doc index c8f6b11d5da1..f699cf05d409 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -1092,7 +1092,11 @@ sub output_struct_rst(%) { print "\n\n.. c:type:: " . $name . "\n\n"; } else { my $name = $args{'struct'}; - print "\n\n.. c:struct:: " . $name . "\n\n"; + if ($args{'type'} eq 'union') { + print "\n\n.. c:union:: " . $name . "\n\n"; + } else { + print "\n\n.. c:struct:: " . $name . "\n\n"; + } } print_lineno($declaration_start_line); $lineprefix = " "; @@ -1427,20 +1431,25 @@ sub dump_enum($$) { } } +my $typedef_type = qr { ((?:\s+[\w\*]+){1,8})\s* }x; +my $typedef_ident = qr { \*?\s*(\w\S+)\s* }x; +my $typedef_args = qr { \s*\((.*)\); }x; + +my $typedef1 = qr { typedef$typedef_type\($typedef_ident\)$typedef_args }x; +my $typedef2 = qr { typedef$typedef_type$typedef_ident$typedef_args }x; + sub dump_typedef($$) { my $x = shift; my $file = shift; $x =~ s@/\*.*?\*/@@gos; # strip comments. - # Parse function prototypes - if ($x =~ /typedef\s+(\w+)\s*\(\*\s*(\w\S+)\s*\)\s*\((.*)\);/ || - $x =~ /typedef\s+(\w+)\s*(\w\S+)\s*\s*\((.*)\);/) { - - # Function typedefs + # Parse function typedef prototypes + if ($x =~ $typedef1 || $x =~ $typedef2) { $return_type = $1; $declaration_name = $2; my $args = $3; + $return_type =~ s/^\s+//; create_parameterlist($args, ',', $file, $declaration_name); diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h index 38043074ce5e..6ebefec616e4 100644 --- a/security/integrity/ima/ima.h +++ b/security/integrity/ima/ima.h @@ -101,7 +101,7 @@ struct ima_template_entry { struct tpm_digest *digests; struct ima_template_desc *template_desc; /* template descriptor */ u32 template_data_len; - struct ima_field_data template_data[0]; /* template related data */ + struct ima_field_data template_data[]; /* template related data */ }; struct ima_queue_entry { diff --git a/sound/core/control.c b/sound/core/control.c index 421ddc76f264..4373de42a5a0 100644 --- a/sound/core/control.c +++ b/sound/core/control.c @@ -1925,8 +1925,8 @@ EXPORT_SYMBOL(snd_ctl_unregister_ioctl); #ifdef CONFIG_COMPAT /** - * snd_ctl_unregister_ioctl - de-register the device-specific compat 32bit - * control-ioctls + * snd_ctl_unregister_ioctl_compat - de-register the device-specific compat + * 32bit control-ioctls * @fcn: ioctl callback function to unregister */ int snd_ctl_unregister_ioctl_compat(snd_kctl_ioctl_func_t fcn) diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c index 4d059ff2b2e4..4d0e8fe535a1 100644 --- a/sound/core/pcm_dmaengine.c +++ b/sound/core/pcm_dmaengine.c @@ -356,7 +356,8 @@ int snd_dmaengine_pcm_close(struct snd_pcm_substream *substream) EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_close); /** - * snd_dmaengine_pcm_release_chan_close - Close a dmaengine based PCM substream and release channel + * snd_dmaengine_pcm_close_release_chan - Close a dmaengine based PCM + * substream and release channel * @substream: PCM substream * * Releases the DMA channel associated with the PCM substream. diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index d531e1bc2b81..bda3514c7b2d 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -490,7 +490,7 @@ void snd_pcm_set_ops(struct snd_pcm *pcm, int direction, EXPORT_SYMBOL(snd_pcm_set_ops); /** - * snd_pcm_sync - set the PCM sync id + * snd_pcm_set_sync - set the PCM sync id * @substream: the pcm substream * * Sets the PCM sync identifier for the card. diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 9e0b2d73faf6..47b155a49226 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -112,7 +112,7 @@ void snd_pcm_stream_lock(struct snd_pcm_substream *substream) EXPORT_SYMBOL_GPL(snd_pcm_stream_lock); /** - * snd_pcm_stream_lock - Unlock the PCM stream + * snd_pcm_stream_unlock - Unlock the PCM stream * @substream: PCM substream * * This unlocks the PCM stream that has been locked via snd_pcm_stream_lock(). @@ -595,7 +595,7 @@ static void snd_pcm_sync_stop(struct snd_pcm_substream *substream) } /** - * snd_pcm_hw_param_choose - choose a configuration defined by @params + * snd_pcm_hw_params_choose - choose a configuration defined by @params * @pcm: PCM instance * @params: the hw_params instance * diff --git a/sound/hda/ext/hdac_ext_controller.c b/sound/hda/ext/hdac_ext_controller.c index 4d060d5b1db6..b0c0ef824d7d 100644 --- a/sound/hda/ext/hdac_ext_controller.c +++ b/sound/hda/ext/hdac_ext_controller.c @@ -148,6 +148,8 @@ struct hdac_ext_link *snd_hdac_ext_bus_get_link(struct hdac_bus *bus, return NULL; if (bus->idx != bus_idx) return NULL; + if (addr < 0 || addr > 31) + return NULL; list_for_each_entry(hlink, &bus->hlink_list, list) { for (i = 0; i < HDA_MAX_CODECS; i++) { diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index a356c21edb90..4bb58e8b08a8 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -2934,7 +2934,7 @@ static void hda_call_codec_resume(struct hda_codec *codec) snd_hdac_leave_pm(&codec->core); } -static int hda_codec_runtime_suspend(struct device *dev) +static int hda_codec_suspend(struct device *dev) { struct hda_codec *codec = dev_to_hda_codec(dev); unsigned int state; @@ -2953,7 +2953,7 @@ static int hda_codec_runtime_suspend(struct device *dev) return 0; } -static int hda_codec_runtime_resume(struct device *dev) +static int hda_codec_resume(struct device *dev) { struct hda_codec *codec = dev_to_hda_codec(dev); @@ -2967,57 +2967,70 @@ static int hda_codec_runtime_resume(struct device *dev) pm_runtime_mark_last_busy(dev); return 0; } + +static int hda_codec_runtime_suspend(struct device *dev) +{ + return hda_codec_suspend(dev); +} + +static int hda_codec_runtime_resume(struct device *dev) +{ + return hda_codec_resume(dev); +} + #endif /* CONFIG_PM */ #ifdef CONFIG_PM_SLEEP -static int hda_codec_force_resume(struct device *dev) +static int hda_codec_pm_prepare(struct device *dev) +{ + return pm_runtime_suspended(dev); +} + +static void hda_codec_pm_complete(struct device *dev) { struct hda_codec *codec = dev_to_hda_codec(dev); - int ret; - ret = pm_runtime_force_resume(dev); - /* schedule jackpoll work for jack detection update */ - if (codec->jackpoll_interval || - (pm_runtime_suspended(dev) && hda_codec_need_resume(codec))) - schedule_delayed_work(&codec->jackpoll_work, - codec->jackpoll_interval); - return ret; + if (pm_runtime_suspended(dev) && (codec->jackpoll_interval || + hda_codec_need_resume(codec) || codec->forced_resume)) + pm_request_resume(dev); } static int hda_codec_pm_suspend(struct device *dev) { dev->power.power_state = PMSG_SUSPEND; - return pm_runtime_force_suspend(dev); + return hda_codec_suspend(dev); } static int hda_codec_pm_resume(struct device *dev) { dev->power.power_state = PMSG_RESUME; - return hda_codec_force_resume(dev); + return hda_codec_resume(dev); } static int hda_codec_pm_freeze(struct device *dev) { dev->power.power_state = PMSG_FREEZE; - return pm_runtime_force_suspend(dev); + return hda_codec_suspend(dev); } static int hda_codec_pm_thaw(struct device *dev) { dev->power.power_state = PMSG_THAW; - return hda_codec_force_resume(dev); + return hda_codec_resume(dev); } static int hda_codec_pm_restore(struct device *dev) { dev->power.power_state = PMSG_RESTORE; - return hda_codec_force_resume(dev); + return hda_codec_resume(dev); } #endif /* CONFIG_PM_SLEEP */ /* referred in hda_bind.c */ const struct dev_pm_ops hda_codec_driver_pm = { #ifdef CONFIG_PM_SLEEP + .prepare = hda_codec_pm_prepare, + .complete = hda_codec_pm_complete, .suspend = hda_codec_pm_suspend, .resume = hda_codec_pm_resume, .freeze = hda_codec_pm_freeze, diff --git a/sound/pci/hda/hda_controller.h b/sound/pci/hda/hda_controller.h index be63ead8161f..68f9668788ea 100644 --- a/sound/pci/hda/hda_controller.h +++ b/sound/pci/hda/hda_controller.h @@ -41,7 +41,7 @@ /* 24 unused */ #define AZX_DCAPS_COUNT_LPIB_DELAY (1 << 25) /* Take LPIB as delay */ #define AZX_DCAPS_PM_RUNTIME (1 << 26) /* runtime PM support */ -#define AZX_DCAPS_SUSPEND_SPURIOUS_WAKEUP (1 << 27) /* Workaround for spurious wakeups after suspend */ +/* 27 unused */ #define AZX_DCAPS_CORBRP_SELF_CLEAR (1 << 28) /* CORBRP clears itself after reset */ #define AZX_DCAPS_NO_MSI64 (1 << 29) /* Stick to 32-bit MSIs */ #define AZX_DCAPS_SEPARATE_STREAM_TAG (1 << 30) /* capture and playback use separate stream tag */ @@ -143,6 +143,7 @@ struct azx { unsigned int align_buffer_size:1; unsigned int region_requested:1; unsigned int disabled:1; /* disabled by vga_switcheroo */ + unsigned int pm_prepared:1; /* GTS present */ unsigned int gts_present:1; diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 749b88090970..d539f52009a1 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -297,8 +297,7 @@ enum { /* PCH for HSW/BDW; with runtime PM */ /* no i915 binding for this as HSW/BDW has another controller for HDMI */ #define AZX_DCAPS_INTEL_PCH \ - (AZX_DCAPS_INTEL_PCH_BASE | AZX_DCAPS_PM_RUNTIME |\ - AZX_DCAPS_SUSPEND_SPURIOUS_WAKEUP) + (AZX_DCAPS_INTEL_PCH_BASE | AZX_DCAPS_PM_RUNTIME) /* HSW HDMI */ #define AZX_DCAPS_INTEL_HASWELL \ @@ -985,7 +984,7 @@ static void __azx_runtime_suspend(struct azx *chip) display_power(chip, false); } -static void __azx_runtime_resume(struct azx *chip, bool from_rt) +static void __azx_runtime_resume(struct azx *chip) { struct hda_intel *hda = container_of(chip, struct hda_intel, chip); struct hdac_bus *bus = azx_bus(chip); @@ -1002,7 +1001,8 @@ static void __azx_runtime_resume(struct azx *chip, bool from_rt) azx_init_pci(chip); hda_intel_init_chip(chip, true); - if (from_rt) { + /* Avoid codec resume if runtime resume is for system suspend */ + if (!chip->pm_prepared) { list_for_each_codec(codec, &chip->bus) { if (codec->relaxed_resume) continue; @@ -1018,6 +1018,29 @@ static void __azx_runtime_resume(struct azx *chip, bool from_rt) } #ifdef CONFIG_PM_SLEEP +static int azx_prepare(struct device *dev) +{ + struct snd_card *card = dev_get_drvdata(dev); + struct azx *chip; + + chip = card->private_data; + chip->pm_prepared = 1; + + /* HDA controller always requires different WAKEEN for runtime suspend + * and system suspend, so don't use direct-complete here. + */ + return 0; +} + +static void azx_complete(struct device *dev) +{ + struct snd_card *card = dev_get_drvdata(dev); + struct azx *chip; + + chip = card->private_data; + chip->pm_prepared = 0; +} + static int azx_suspend(struct device *dev) { struct snd_card *card = dev_get_drvdata(dev); @@ -1029,15 +1052,7 @@ static int azx_suspend(struct device *dev) chip = card->private_data; bus = azx_bus(chip); - snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); - /* An ugly workaround: direct call of __azx_runtime_suspend() and - * __azx_runtime_resume() for old Intel platforms that suffer from - * spurious wakeups after S3 suspend - */ - if (chip->driver_caps & AZX_DCAPS_SUSPEND_SPURIOUS_WAKEUP) - __azx_runtime_suspend(chip); - else - pm_runtime_force_suspend(dev); + __azx_runtime_suspend(chip); if (bus->irq >= 0) { free_irq(bus->irq, chip); bus->irq = -1; @@ -1066,11 +1081,7 @@ static int azx_resume(struct device *dev) if (azx_acquire_irq(chip, 1) < 0) return -EIO; - if (chip->driver_caps & AZX_DCAPS_SUSPEND_SPURIOUS_WAKEUP) - __azx_runtime_resume(chip, false); - else - pm_runtime_force_resume(dev); - snd_power_change_state(card, SNDRV_CTL_POWER_D0); + __azx_runtime_resume(chip); trace_azx_resume(chip); return 0; @@ -1118,10 +1129,7 @@ static int azx_runtime_suspend(struct device *dev) chip = card->private_data; /* enable controller wake up event */ - if (snd_power_get_state(card) == SNDRV_CTL_POWER_D0) { - azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) | - STATESTS_INT_MASK); - } + azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) | STATESTS_INT_MASK); __azx_runtime_suspend(chip); trace_azx_runtime_suspend(chip); @@ -1132,18 +1140,14 @@ static int azx_runtime_resume(struct device *dev) { struct snd_card *card = dev_get_drvdata(dev); struct azx *chip; - bool from_rt = snd_power_get_state(card) == SNDRV_CTL_POWER_D0; if (!azx_is_pm_ready(card)) return 0; chip = card->private_data; - __azx_runtime_resume(chip, from_rt); + __azx_runtime_resume(chip); /* disable controller Wake Up event*/ - if (from_rt) { - azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) & - ~STATESTS_INT_MASK); - } + azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) & ~STATESTS_INT_MASK); trace_azx_runtime_resume(chip); return 0; @@ -1177,6 +1181,8 @@ static int azx_runtime_idle(struct device *dev) static const struct dev_pm_ops azx_pm = { SET_SYSTEM_SLEEP_PM_OPS(azx_suspend, azx_resume) #ifdef CONFIG_PM_SLEEP + .prepare = azx_prepare, + .complete = azx_complete, .freeze_noirq = azx_freeze_noirq, .thaw_noirq = azx_thaw_noirq, #endif @@ -2356,6 +2362,7 @@ static int azx_probe_continue(struct azx *chip) if (azx_has_pm_runtime(chip)) { pm_runtime_use_autosuspend(&pci->dev); + pm_runtime_allow(&pci->dev); pm_runtime_put_autosuspend(&pci->dev); } diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f2398721ac1e..6899089d132e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6008,6 +6008,27 @@ static void alc285_fixup_invalidate_dacs(struct hda_codec *codec, snd_hda_override_wcaps(codec, 0x03, 0); } +static void alc_combo_jack_hp_jd_restart(struct hda_codec *codec) +{ + switch (codec->core.vendor_id) { + case 0x10ec0274: + case 0x10ec0294: + case 0x10ec0225: + case 0x10ec0295: + case 0x10ec0299: + alc_update_coef_idx(codec, 0x4a, 0x8000, 1 << 15); /* Reset HP JD */ + alc_update_coef_idx(codec, 0x4a, 0x8000, 0 << 15); + break; + case 0x10ec0235: + case 0x10ec0236: + case 0x10ec0255: + case 0x10ec0256: + alc_update_coef_idx(codec, 0x1b, 0x8000, 1 << 15); /* Reset HP JD */ + alc_update_coef_idx(codec, 0x1b, 0x8000, 0 << 15); + break; + } +} + static void alc295_fixup_chromebook(struct hda_codec *codec, const struct hda_fixup *fix, int action) { @@ -6018,16 +6039,7 @@ static void alc295_fixup_chromebook(struct hda_codec *codec, spec->ultra_low_power = true; break; case HDA_FIXUP_ACT_INIT: - switch (codec->core.vendor_id) { - case 0x10ec0295: - alc_update_coef_idx(codec, 0x4a, 0x8000, 1 << 15); /* Reset HP JD */ - alc_update_coef_idx(codec, 0x4a, 0x8000, 0 << 15); - break; - case 0x10ec0236: - alc_update_coef_idx(codec, 0x1b, 0x8000, 1 << 15); /* Reset HP JD */ - alc_update_coef_idx(codec, 0x1b, 0x8000, 0 << 15); - break; - } + alc_combo_jack_hp_jd_restart(codec); break; } } @@ -6083,6 +6095,16 @@ static void alc285_fixup_hp_gpio_amp_init(struct hda_codec *codec, alc_write_coef_idx(codec, 0x65, 0x0); } +static void alc274_fixup_hp_headset_mic(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + switch (action) { + case HDA_FIXUP_ACT_INIT: + alc_combo_jack_hp_jd_restart(codec); + break; + } +} + /* for hda_fixup_thinkpad_acpi() */ #include "thinkpad_helper.c" @@ -6277,6 +6299,8 @@ enum { ALC256_FIXUP_INTEL_NUC8_RUGGED, ALC255_FIXUP_XIAOMI_HEADSET_MIC, ALC274_FIXUP_HP_MIC, + ALC274_FIXUP_HP_HEADSET_MIC, + ALC256_FIXUP_ASUS_HPE, }; static const struct hda_fixup alc269_fixups[] = { @@ -7664,6 +7688,23 @@ static const struct hda_fixup alc269_fixups[] = { { } }, }, + [ALC274_FIXUP_HP_HEADSET_MIC] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc274_fixup_hp_headset_mic, + .chained = true, + .chain_id = ALC274_FIXUP_HP_MIC + }, + [ALC256_FIXUP_ASUS_HPE] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + /* Set EAPD high */ + { 0x20, AC_VERB_SET_COEF_INDEX, 0x0f }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x7778 }, + { } + }, + .chained = true, + .chain_id = ALC294_FIXUP_ASUS_HEADSET_MIC + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -7815,7 +7856,6 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED), SND_PCI_QUIRK(0x103c, 0x8729, "HP", ALC285_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8736, "HP", ALC285_FIXUP_HP_GPIO_AMP_INIT), - SND_PCI_QUIRK(0x103c, 0x874e, "HP", ALC274_FIXUP_HP_MIC), SND_PCI_QUIRK(0x103c, 0x8760, "HP", ALC285_FIXUP_HP_MUTE_LED), SND_PCI_QUIRK(0x103c, 0x877a, "HP", ALC285_FIXUP_HP_MUTE_LED), SND_PCI_QUIRK(0x103c, 0x877d, "HP", ALC236_FIXUP_HP_MUTE_LED), @@ -7848,6 +7888,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1bbd, "ASUS Z550MA", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC), + SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE), SND_PCI_QUIRK(0x1043, 0x1e11, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA502), SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1881, "ASUS Zephyrus S/M", ALC294_FIXUP_ASUS_GX502_PINS), @@ -8339,6 +8380,10 @@ static const struct snd_hda_pin_quirk alc269_pin_fixup_tbl[] = { {0x1a, 0x90a70130}, {0x1b, 0x90170110}, {0x21, 0x03211020}), + SND_HDA_PIN_QUIRK(0x10ec0274, 0x103c, "HP", ALC274_FIXUP_HP_HEADSET_MIC, + {0x17, 0x90170110}, + {0x19, 0x03a11030}, + {0x21, 0x03211020}), SND_HDA_PIN_QUIRK(0x10ec0280, 0x103c, "HP", ALC280_FIXUP_HP_GPIO4, {0x12, 0x90a60130}, {0x14, 0x90170110}, diff --git a/sound/soc/atmel/mchp-spdiftx.c b/sound/soc/atmel/mchp-spdiftx.c index 82c1eecd2528..3bd350afb743 100644 --- a/sound/soc/atmel/mchp-spdiftx.c +++ b/sound/soc/atmel/mchp-spdiftx.c @@ -487,7 +487,6 @@ static int mchp_spdiftx_hw_params(struct snd_pcm_substream *substream, } mchp_spdiftx_channel_status_write(dev); spin_unlock_irqrestore(&ctrl->lock, flags); - mr |= SPDIFTX_MR_VALID1 | SPDIFTX_MR_VALID2; if (dev->gclk_enabled) { clk_disable_unprepare(dev->gclk); diff --git a/sound/soc/codecs/cs42l51.c b/sound/soc/codecs/cs42l51.c index 097c4e8d9950..c61b17dc2af8 100644 --- a/sound/soc/codecs/cs42l51.c +++ b/sound/soc/codecs/cs42l51.c @@ -254,8 +254,28 @@ static const struct snd_soc_dapm_widget cs42l51_dapm_widgets[] = { &cs42l51_adcr_mux_controls), }; +static int mclk_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *comp = snd_soc_dapm_to_component(w->dapm); + struct cs42l51_private *cs42l51 = snd_soc_component_get_drvdata(comp); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + return clk_prepare_enable(cs42l51->mclk_handle); + case SND_SOC_DAPM_POST_PMD: + /* Delay mclk shutdown to fulfill power-down sequence requirements */ + msleep(20); + clk_disable_unprepare(cs42l51->mclk_handle); + break; + } + + return 0; +} + static const struct snd_soc_dapm_widget cs42l51_dapm_mclk_widgets[] = { - SND_SOC_DAPM_CLOCK_SUPPLY("MCLK") + SND_SOC_DAPM_SUPPLY("MCLK", SND_SOC_NOPM, 0, 0, mclk_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), }; static const struct snd_soc_dapm_route cs42l51_routes[] = { diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c index f2d9d52ee171..4d2b1ec7c03b 100644 --- a/sound/soc/codecs/wcd9335.c +++ b/sound/soc/codecs/wcd9335.c @@ -618,7 +618,7 @@ static const char * const sb_tx8_mux_text[] = { "ZERO", "RX_MIX_TX8", "DEC8", "DEC8_192" }; -static const DECLARE_TLV_DB_SCALE(digital_gain, 0, 1, 0); +static const DECLARE_TLV_DB_SCALE(digital_gain, -8400, 100, -8400); static const DECLARE_TLV_DB_SCALE(line_gain, 0, 7, 1); static const DECLARE_TLV_DB_SCALE(analog_gain, 0, 25, 1); static const DECLARE_TLV_DB_SCALE(ear_pa_gain, 0, 150, 0); diff --git a/sound/soc/codecs/wcd934x.c b/sound/soc/codecs/wcd934x.c index 35697b072367..40f682f5dab8 100644 --- a/sound/soc/codecs/wcd934x.c +++ b/sound/soc/codecs/wcd934x.c @@ -551,7 +551,7 @@ struct wcd_iir_filter_ctl { struct soc_bytes_ext bytes_ext; }; -static const DECLARE_TLV_DB_SCALE(digital_gain, 0, 1, 0); +static const DECLARE_TLV_DB_SCALE(digital_gain, -8400, 100, -8400); static const DECLARE_TLV_DB_SCALE(line_gain, 0, 7, 1); static const DECLARE_TLV_DB_SCALE(analog_gain, 0, 25, 1); static const DECLARE_TLV_DB_SCALE(ear_pa_gain, 0, 150, 0); diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c index 68e774e69c85..4530b74f5921 100644 --- a/sound/soc/codecs/wsa881x.c +++ b/sound/soc/codecs/wsa881x.c @@ -1026,6 +1026,8 @@ static struct snd_soc_dai_driver wsa881x_dais[] = { .id = 0, .playback = { .stream_name = "SPKR Playback", + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, .rate_max = 48000, .rate_min = 48000, .channels_min = 1, diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index d5bae5d1ab6f..a5b446d5af19 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -15,22 +15,6 @@ config SND_SOC_INTEL_SST_TOPLEVEL if SND_SOC_INTEL_SST_TOPLEVEL -config SND_SST_IPC - tristate - # This option controls the IPC core for HiFi2 platforms - -config SND_SST_IPC_PCI - tristate - select SND_SST_IPC - # This option controls the PCI-based IPC for HiFi2 platforms - # (Medfield, Merrifield). - -config SND_SST_IPC_ACPI - tristate - select SND_SST_IPC - # This option controls the ACPI-based IPC for HiFi2 platforms - # (Baytrail, Cherrytrail) - config SND_SOC_INTEL_SST tristate @@ -57,7 +41,6 @@ config SND_SST_ATOM_HIFI2_PLATFORM config SND_SST_ATOM_HIFI2_PLATFORM_PCI tristate "PCI HiFi2 (Merrifield) Platforms" depends on X86 && PCI - select SND_SST_IPC_PCI select SND_SST_ATOM_HIFI2_PLATFORM help If you have a Intel Merrifield/Edison platform, then @@ -70,7 +53,6 @@ config SND_SST_ATOM_HIFI2_PLATFORM_ACPI tristate "ACPI HiFi2 (Baytrail, Cherrytrail) Platforms" default ACPI depends on X86 && ACPI && PCI - select SND_SST_IPC_ACPI select SND_SST_ATOM_HIFI2_PLATFORM select SND_SOC_ACPI_INTEL_MATCH select IOSF_MBI diff --git a/sound/soc/intel/atom/Makefile b/sound/soc/intel/atom/Makefile index a9326d5ec44c..c66f03f5d8d6 100644 --- a/sound/soc/intel/atom/Makefile +++ b/sound/soc/intel/atom/Makefile @@ -6,4 +6,4 @@ snd-soc-sst-atom-hifi2-platform-objs := sst-mfld-platform-pcm.o \ obj-$(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM) += snd-soc-sst-atom-hifi2-platform.o # DSP driver -obj-$(CONFIG_SND_SST_IPC) += sst/ +obj-$(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM) += sst/ diff --git a/sound/soc/intel/atom/sst/Makefile b/sound/soc/intel/atom/sst/Makefile index f17c905df3e2..5761d30a5f9d 100644 --- a/sound/soc/intel/atom/sst/Makefile +++ b/sound/soc/intel/atom/sst/Makefile @@ -3,6 +3,6 @@ snd-intel-sst-core-objs := sst.o sst_ipc.o sst_stream.o sst_drv_interface.o sst_ snd-intel-sst-pci-objs += sst_pci.o snd-intel-sst-acpi-objs += sst_acpi.o -obj-$(CONFIG_SND_SST_IPC) += snd-intel-sst-core.o -obj-$(CONFIG_SND_SST_IPC_PCI) += snd-intel-sst-pci.o -obj-$(CONFIG_SND_SST_IPC_ACPI) += snd-intel-sst-acpi.o +obj-$(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM) += snd-intel-sst-core.o +obj-$(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI) += snd-intel-sst-pci.o +obj-$(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI) += snd-intel-sst-acpi.o diff --git a/sound/soc/intel/boards/kbl_rt5663_max98927.c b/sound/soc/intel/boards/kbl_rt5663_max98927.c index 3ea4602dfb3e..9a4b3d0973f6 100644 --- a/sound/soc/intel/boards/kbl_rt5663_max98927.c +++ b/sound/soc/intel/boards/kbl_rt5663_max98927.c @@ -401,17 +401,40 @@ static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, struct snd_interval *chan = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); - struct snd_soc_dpcm *dpcm = container_of( - params, struct snd_soc_dpcm, hw_params); - struct snd_soc_dai_link *fe_dai_link = dpcm->fe->dai_link; - struct snd_soc_dai_link *be_dai_link = dpcm->be->dai_link; + struct snd_soc_dpcm *dpcm, *rtd_dpcm = NULL; + + /* + * The following loop will be called only for playback stream + * In this platform, there is only one playback device on every SSP + */ + for_each_dpcm_fe(rtd, SNDRV_PCM_STREAM_PLAYBACK, dpcm) { + rtd_dpcm = dpcm; + break; + } + + /* + * This following loop will be called only for capture stream + * In this platform, there is only one capture device on every SSP + */ + for_each_dpcm_fe(rtd, SNDRV_PCM_STREAM_CAPTURE, dpcm) { + rtd_dpcm = dpcm; + break; + } + + if (!rtd_dpcm) + return -EINVAL; + + /* + * The above 2 loops are mutually exclusive based on the stream direction, + * thus rtd_dpcm variable will never be overwritten + */ /* * The ADSP will convert the FE rate to 48k, stereo, 24 bit */ - if (!strcmp(fe_dai_link->name, "Kbl Audio Port") || - !strcmp(fe_dai_link->name, "Kbl Audio Headset Playback") || - !strcmp(fe_dai_link->name, "Kbl Audio Capture Port")) { + if (!strcmp(rtd_dpcm->fe->dai_link->name, "Kbl Audio Port") || + !strcmp(rtd_dpcm->fe->dai_link->name, "Kbl Audio Headset Playback") || + !strcmp(rtd_dpcm->fe->dai_link->name, "Kbl Audio Capture Port")) { rate->min = rate->max = 48000; chan->min = chan->max = 2; snd_mask_none(fmt); @@ -421,7 +444,7 @@ static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, * The speaker on the SSP0 supports S16_LE and not S24_LE. * thus changing the mask here */ - if (!strcmp(be_dai_link->name, "SSP0-Codec")) + if (!strcmp(rtd_dpcm->be->dai_link->name, "SSP0-Codec")) snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S16_LE); return 0; diff --git a/sound/soc/intel/catpt/dsp.c b/sound/soc/intel/catpt/dsp.c index 7d2968571951..9e807b941732 100644 --- a/sound/soc/intel/catpt/dsp.c +++ b/sound/soc/intel/catpt/dsp.c @@ -267,9 +267,12 @@ static int catpt_dsp_select_lpclock(struct catpt_dev *cdev, bool lp, bool waiti) reg, (reg & CATPT_ISD_DCPWM), 500, 10000); if (ret) { - dev_err(cdev->dev, "await WAITI timeout\n"); - mutex_unlock(&cdev->clk_mutex); - return ret; + dev_warn(cdev->dev, "await WAITI timeout\n"); + /* no signal - only high clock selection allowed */ + if (lp) { + mutex_unlock(&cdev->clk_mutex); + return 0; + } } } diff --git a/sound/soc/intel/catpt/pcm.c b/sound/soc/intel/catpt/pcm.c index f78018c857b8..ba653ebea7d1 100644 --- a/sound/soc/intel/catpt/pcm.c +++ b/sound/soc/intel/catpt/pcm.c @@ -667,7 +667,17 @@ static int catpt_dai_pcm_new(struct snd_soc_pcm_runtime *rtm, break; } + /* see if this is a new configuration */ + if (!memcmp(&cdev->devfmt[devfmt.iface], &devfmt, sizeof(devfmt))) + return 0; + + pm_runtime_get_sync(cdev->dev); + ret = catpt_ipc_set_device_format(cdev, &devfmt); + + pm_runtime_mark_last_busy(cdev->dev); + pm_runtime_put_autosuspend(cdev->dev); + if (ret) return CATPT_IPC_ERROR(ret); diff --git a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c index c2c1eb16fcc0..26e7d9a7198f 100644 --- a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c +++ b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c @@ -630,15 +630,34 @@ static struct snd_soc_codec_conf mt8183_da7219_rt1015_codec_conf[] = { }, }; +static const struct snd_kcontrol_new mt8183_da7219_rt1015_snd_controls[] = { + SOC_DAPM_PIN_SWITCH("Left Spk"), + SOC_DAPM_PIN_SWITCH("Right Spk"), +}; + +static const +struct snd_soc_dapm_widget mt8183_da7219_rt1015_dapm_widgets[] = { + SND_SOC_DAPM_SPK("Left Spk", NULL), + SND_SOC_DAPM_SPK("Right Spk", NULL), + SND_SOC_DAPM_PINCTRL("TDM_OUT_PINCTRL", + "aud_tdm_out_on", "aud_tdm_out_off"), +}; + +static const struct snd_soc_dapm_route mt8183_da7219_rt1015_dapm_routes[] = { + {"Left Spk", NULL, "Left SPO"}, + {"Right Spk", NULL, "Right SPO"}, + {"I2S Playback", NULL, "TDM_OUT_PINCTRL"}, +}; + static struct snd_soc_card mt8183_da7219_rt1015_card = { .name = "mt8183_da7219_rt1015", .owner = THIS_MODULE, - .controls = mt8183_da7219_max98357_snd_controls, - .num_controls = ARRAY_SIZE(mt8183_da7219_max98357_snd_controls), - .dapm_widgets = mt8183_da7219_max98357_dapm_widgets, - .num_dapm_widgets = ARRAY_SIZE(mt8183_da7219_max98357_dapm_widgets), - .dapm_routes = mt8183_da7219_max98357_dapm_routes, - .num_dapm_routes = ARRAY_SIZE(mt8183_da7219_max98357_dapm_routes), + .controls = mt8183_da7219_rt1015_snd_controls, + .num_controls = ARRAY_SIZE(mt8183_da7219_rt1015_snd_controls), + .dapm_widgets = mt8183_da7219_rt1015_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(mt8183_da7219_rt1015_dapm_widgets), + .dapm_routes = mt8183_da7219_rt1015_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(mt8183_da7219_rt1015_dapm_routes), .dai_link = mt8183_da7219_dai_links, .num_links = ARRAY_SIZE(mt8183_da7219_dai_links), .aux_dev = &mt8183_da7219_max98357_headset_dev, diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c index ba2aca301a9b..9d17c87445a9 100644 --- a/sound/soc/qcom/lpass-cpu.c +++ b/sound/soc/qcom/lpass-cpu.c @@ -80,6 +80,12 @@ static int lpass_cpu_daiops_startup(struct snd_pcm_substream *substream, dev_err(dai->dev, "error in enabling mi2s osr clk: %d\n", ret); return ret; } + ret = clk_prepare(drvdata->mi2s_bit_clk[dai->driver->id]); + if (ret) { + dev_err(dai->dev, "error in enabling mi2s bit clk: %d\n", ret); + clk_disable_unprepare(drvdata->mi2s_osr_clk[dai->driver->id]); + return ret; + } return 0; } @@ -88,9 +94,8 @@ static void lpass_cpu_daiops_shutdown(struct snd_pcm_substream *substream, { struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai); - clk_disable_unprepare(drvdata->mi2s_bit_clk[dai->driver->id]); - clk_disable_unprepare(drvdata->mi2s_osr_clk[dai->driver->id]); + clk_unprepare(drvdata->mi2s_bit_clk[dai->driver->id]); } static int lpass_cpu_daiops_hw_params(struct snd_pcm_substream *substream, @@ -303,10 +308,10 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream, dev_err(dai->dev, "error writing to i2sctl reg: %d\n", ret); - ret = clk_prepare_enable(drvdata->mi2s_bit_clk[id]); + ret = clk_enable(drvdata->mi2s_bit_clk[id]); if (ret) { dev_err(dai->dev, "error in enabling mi2s bit clk: %d\n", ret); - clk_disable_unprepare(drvdata->mi2s_osr_clk[id]); + clk_disable(drvdata->mi2s_osr_clk[id]); return ret; } @@ -324,6 +329,7 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream, if (ret) dev_err(dai->dev, "error writing to i2sctl reg: %d\n", ret); + clk_disable(drvdata->mi2s_bit_clk[dai->driver->id]); break; } diff --git a/sound/soc/qcom/lpass-sc7180.c b/sound/soc/qcom/lpass-sc7180.c index c6292f9e613f..bc998d501600 100644 --- a/sound/soc/qcom/lpass-sc7180.c +++ b/sound/soc/qcom/lpass-sc7180.c @@ -188,7 +188,7 @@ static struct lpass_variant sc7180_data = { .micmode = REG_FIELD_ID(0x1000, 4, 8, 3, 0x1000), .micmono = REG_FIELD_ID(0x1000, 3, 3, 3, 0x1000), .wssrc = REG_FIELD_ID(0x1000, 2, 2, 3, 0x1000), - .bitwidth = REG_FIELD_ID(0x1000, 0, 0, 3, 0x1000), + .bitwidth = REG_FIELD_ID(0x1000, 0, 1, 3, 0x1000), .rdma_dyncclk = REG_FIELD_ID(0xC000, 21, 21, 5, 0x1000), .rdma_bursten = REG_FIELD_ID(0xC000, 20, 20, 5, 0x1000), diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c index ab1bf23c21a6..6c2760e27ea6 100644 --- a/sound/soc/qcom/sdm845.c +++ b/sound/soc/qcom/sdm845.c @@ -17,6 +17,7 @@ #include "qdsp6/q6afe.h" #include "../codecs/rt5663.h" +#define DRIVER_NAME "sdm845" #define DEFAULT_SAMPLE_RATE_48K 48000 #define DEFAULT_MCLK_RATE 24576000 #define TDM_BCLK_RATE 6144000 @@ -552,6 +553,7 @@ static int sdm845_snd_platform_probe(struct platform_device *pdev) if (!data) return -ENOMEM; + card->driver_name = DRIVER_NAME; card->dapm_widgets = sdm845_snd_widgets; card->num_dapm_widgets = ARRAY_SIZE(sdm845_snd_widgets); card->dev = dev; diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index ea3986a46c12..05a085f6dc7c 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -2341,7 +2341,7 @@ struct snd_soc_dai *snd_soc_register_dai(struct snd_soc_component *component, } /** - * snd_soc_unregister_dai - Unregister DAIs from the ASoC core + * snd_soc_unregister_dais - Unregister DAIs from the ASoC core * * @component: The component for which the DAIs should be unregistered */ diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 980f2c330b87..7f87b449f950 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -1276,7 +1276,7 @@ static int is_connected_input_ep(struct snd_soc_dapm_widget *widget, } /** - * snd_soc_dapm_get_connected_widgets - query audio path and it's widgets. + * snd_soc_dapm_dai_get_connected_widgets - query audio path and it's widgets. * @dai: the soc DAI. * @stream: stream direction. * @list: list of active widgets for this stream. diff --git a/sound/soc/sof/loader.c b/sound/soc/sof/loader.c index 68ed454f7ddf..ba9ed66f98bc 100644 --- a/sound/soc/sof/loader.c +++ b/sound/soc/sof/loader.c @@ -118,6 +118,11 @@ int snd_sof_fw_parse_ext_data(struct snd_sof_dev *sdev, u32 bar, u32 offset) case SOF_IPC_EXT_CC_INFO: ret = get_cc_info(sdev, ext_hdr); break; + case SOF_IPC_EXT_UNUSED: + case SOF_IPC_EXT_PROBE_INFO: + case SOF_IPC_EXT_USER_ABI_INFO: + /* They are supported but we don't do anything here */ + break; default: dev_warn(sdev->dev, "warning: unknown ext header type %d size 0x%x\n", ext_hdr->type, ext_hdr->hdr.size); diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index b401ee894e1b..a860303cc522 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -336,6 +336,7 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs, switch (subs->stream->chip->usb_id) { case USB_ID(0x0763, 0x2030): /* M-Audio Fast Track C400 */ case USB_ID(0x0763, 0x2031): /* M-Audio Fast Track C600 */ + case USB_ID(0x22f0, 0x0006): /* Allen&Heath Qu-16 */ ep = 0x81; ifnum = 3; goto add_sync_ep_from_ifnum; @@ -345,6 +346,7 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs, ifnum = 2; goto add_sync_ep_from_ifnum; case USB_ID(0x2466, 0x8003): /* Fractal Audio Axe-Fx II */ + case USB_ID(0x0499, 0x172a): /* Yamaha MODX */ ep = 0x86; ifnum = 2; goto add_sync_ep_from_ifnum; @@ -352,6 +354,10 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs, ep = 0x81; ifnum = 2; goto add_sync_ep_from_ifnum; + case USB_ID(0x1686, 0xf029): /* Zoom UAC-2 */ + ep = 0x82; + ifnum = 2; + goto add_sync_ep_from_ifnum; case USB_ID(0x1397, 0x0001): /* Behringer UFX1604 */ case USB_ID(0x1397, 0x0002): /* Behringer UFX1204 */ ep = 0x81; diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index b4fa80ef730d..c989ad8052ae 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1800,6 +1800,7 @@ u64 snd_usb_interface_dsd_format_quirks(struct snd_usb_audio *chip, case 0x278b: /* Rotel? */ case 0x292b: /* Gustard/Ess based devices */ case 0x2ab6: /* T+A devices */ + case 0x3353: /* Khadas devices */ case 0x3842: /* EVGA */ case 0xc502: /* HiBy devices */ if (fp->dsd_raw) diff --git a/tools/arch/arm64/include/uapi/asm/kvm.h b/tools/arch/arm64/include/uapi/asm/kvm.h index ba85bb23f060..1c17c3a24411 100644 --- a/tools/arch/arm64/include/uapi/asm/kvm.h +++ b/tools/arch/arm64/include/uapi/asm/kvm.h @@ -159,6 +159,21 @@ struct kvm_sync_regs { struct kvm_arch_memory_slot { }; +/* + * PMU filter structure. Describe a range of events with a particular + * action. To be used with KVM_ARM_VCPU_PMU_V3_FILTER. + */ +struct kvm_pmu_event_filter { + __u16 base_event; + __u16 nevents; + +#define KVM_PMU_EVENT_ALLOW 0 +#define KVM_PMU_EVENT_DENY 1 + + __u8 action; + __u8 pad[3]; +}; + /* for KVM_GET/SET_VCPU_EVENTS */ struct kvm_vcpu_events { struct { @@ -242,6 +257,15 @@ struct kvm_vcpu_events { #define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL 0 #define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL 1 #define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED 2 + +/* + * Only two states can be presented by the host kernel: + * - NOT_REQUIRED: the guest doesn't need to do anything + * - NOT_AVAIL: the guest isn't mitigated (it can still use SSBS if available) + * + * All the other values are deprecated. The host still accepts all + * values (they are ABI), but will narrow them to the above two. + */ #define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2 KVM_REG_ARM_FW_REG(2) #define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL 0 #define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN 1 @@ -329,6 +353,7 @@ struct kvm_vcpu_events { #define KVM_ARM_VCPU_PMU_V3_CTRL 0 #define KVM_ARM_VCPU_PMU_V3_IRQ 0 #define KVM_ARM_VCPU_PMU_V3_INIT 1 +#define KVM_ARM_VCPU_PMU_V3_FILTER 2 #define KVM_ARM_VCPU_TIMER_CTRL 1 #define KVM_ARM_VCPU_TIMER_IRQ_VTIMER 0 #define KVM_ARM_VCPU_TIMER_IRQ_PTIMER 1 diff --git a/tools/arch/s390/include/uapi/asm/sie.h b/tools/arch/s390/include/uapi/asm/sie.h index 6ca1e68d7103..ede318653c87 100644 --- a/tools/arch/s390/include/uapi/asm/sie.h +++ b/tools/arch/s390/include/uapi/asm/sie.h @@ -29,7 +29,7 @@ { 0x13, "SIGP conditional emergency signal" }, \ { 0x15, "SIGP sense running" }, \ { 0x16, "SIGP set multithreading"}, \ - { 0x17, "SIGP store additional status ait address"} + { 0x17, "SIGP store additional status at address"} #define icpt_prog_codes \ { 0x0001, "Prog Operation" }, \ diff --git a/tools/arch/x86/include/asm/cpufeatures.h b/tools/arch/x86/include/asm/cpufeatures.h index 2901d5df4366..dad350d42ecf 100644 --- a/tools/arch/x86/include/asm/cpufeatures.h +++ b/tools/arch/x86/include/asm/cpufeatures.h @@ -96,7 +96,7 @@ #define X86_FEATURE_SYSCALL32 ( 3*32+14) /* "" syscall in IA32 userspace */ #define X86_FEATURE_SYSENTER32 ( 3*32+15) /* "" sysenter in IA32 userspace */ #define X86_FEATURE_REP_GOOD ( 3*32+16) /* REP microcode works well */ -/* free ( 3*32+17) */ +#define X86_FEATURE_SME_COHERENT ( 3*32+17) /* "" AMD hardware-enforced cache coherency */ #define X86_FEATURE_LFENCE_RDTSC ( 3*32+18) /* "" LFENCE synchronizes RDTSC */ #define X86_FEATURE_ACC_POWER ( 3*32+19) /* AMD Accumulated Power Mechanism */ #define X86_FEATURE_NOPL ( 3*32+20) /* The NOPL (0F 1F) instructions */ @@ -236,6 +236,7 @@ #define X86_FEATURE_EPT_AD ( 8*32+17) /* Intel Extended Page Table access-dirty bit */ #define X86_FEATURE_VMCALL ( 8*32+18) /* "" Hypervisor supports the VMCALL instruction */ #define X86_FEATURE_VMW_VMMCALL ( 8*32+19) /* "" VMware prefers VMMCALL hypercall instruction */ +#define X86_FEATURE_SEV_ES ( 8*32+20) /* AMD Secure Encrypted Virtualization - Encrypted State */ /* Intel-defined CPU features, CPUID level 0x00000007:0 (EBX), word 9 */ #define X86_FEATURE_FSGSBASE ( 9*32+ 0) /* RDFSBASE, WRFSBASE, RDGSBASE, WRGSBASE instructions*/ @@ -288,6 +289,7 @@ #define X86_FEATURE_FENCE_SWAPGS_USER (11*32+ 4) /* "" LFENCE in user entry SWAPGS path */ #define X86_FEATURE_FENCE_SWAPGS_KERNEL (11*32+ 5) /* "" LFENCE in kernel entry SWAPGS path */ #define X86_FEATURE_SPLIT_LOCK_DETECT (11*32+ 6) /* #AC for split lock */ +#define X86_FEATURE_PER_THREAD_MBA (11*32+ 7) /* "" Per-thread Memory Bandwidth Allocation */ /* Intel-defined CPU features, CPUID level 0x00000007:1 (EAX), word 12 */ #define X86_FEATURE_AVX512_BF16 (12*32+ 5) /* AVX512 BFLOAT16 instructions */ @@ -353,6 +355,7 @@ #define X86_FEATURE_CLDEMOTE (16*32+25) /* CLDEMOTE instruction */ #define X86_FEATURE_MOVDIRI (16*32+27) /* MOVDIRI instruction */ #define X86_FEATURE_MOVDIR64B (16*32+28) /* MOVDIR64B instruction */ +#define X86_FEATURE_ENQCMD (16*32+29) /* ENQCMD and ENQCMDS instructions */ /* AMD-defined CPU features, CPUID level 0x80000007 (EBX), word 17 */ #define X86_FEATURE_OVERFLOW_RECOV (17*32+ 0) /* MCA overflow recovery support */ @@ -368,6 +371,7 @@ #define X86_FEATURE_MD_CLEAR (18*32+10) /* VERW clears CPU buffers */ #define X86_FEATURE_TSX_FORCE_ABORT (18*32+13) /* "" TSX_FORCE_ABORT */ #define X86_FEATURE_SERIALIZE (18*32+14) /* SERIALIZE instruction */ +#define X86_FEATURE_TSXLDTRK (18*32+16) /* TSX Suspend Load Address Tracking */ #define X86_FEATURE_PCONFIG (18*32+18) /* Intel PCONFIG */ #define X86_FEATURE_ARCH_LBR (18*32+19) /* Intel ARCH LBR */ #define X86_FEATURE_SPEC_CTRL (18*32+26) /* "" Speculation Control (IBRS + IBPB) */ diff --git a/tools/arch/x86/include/asm/disabled-features.h b/tools/arch/x86/include/asm/disabled-features.h index 4ea8584682f9..5861d34f9771 100644 --- a/tools/arch/x86/include/asm/disabled-features.h +++ b/tools/arch/x86/include/asm/disabled-features.h @@ -56,6 +56,12 @@ # define DISABLE_PTI (1 << (X86_FEATURE_PTI & 31)) #endif +#ifdef CONFIG_IOMMU_SUPPORT +# define DISABLE_ENQCMD 0 +#else +# define DISABLE_ENQCMD (1 << (X86_FEATURE_ENQCMD & 31)) +#endif + /* * Make sure to add features to the correct mask */ @@ -75,7 +81,8 @@ #define DISABLED_MASK13 0 #define DISABLED_MASK14 0 #define DISABLED_MASK15 0 -#define DISABLED_MASK16 (DISABLE_PKU|DISABLE_OSPKE|DISABLE_LA57|DISABLE_UMIP) +#define DISABLED_MASK16 (DISABLE_PKU|DISABLE_OSPKE|DISABLE_LA57|DISABLE_UMIP| \ + DISABLE_ENQCMD) #define DISABLED_MASK17 0 #define DISABLED_MASK18 0 #define DISABLED_MASK_CHECK BUILD_BUG_ON_ZERO(NCAPINTS != 19) diff --git a/tools/arch/x86/include/asm/msr-index.h b/tools/arch/x86/include/asm/msr-index.h index 2859ee4f39a8..972a34d93505 100644 --- a/tools/arch/x86/include/asm/msr-index.h +++ b/tools/arch/x86/include/asm/msr-index.h @@ -257,6 +257,9 @@ #define MSR_IA32_LASTINTFROMIP 0x000001dd #define MSR_IA32_LASTINTTOIP 0x000001de +#define MSR_IA32_PASID 0x00000d93 +#define MSR_IA32_PASID_VALID BIT_ULL(31) + /* DEBUGCTLMSR bits (others vary by model): */ #define DEBUGCTLMSR_LBR (1UL << 0) /* last branch recording */ #define DEBUGCTLMSR_BTF_SHIFT 1 @@ -464,11 +467,15 @@ #define MSR_AMD64_IBSOP_REG_MASK ((1UL<<MSR_AMD64_IBSOP_REG_COUNT)-1) #define MSR_AMD64_IBSCTL 0xc001103a #define MSR_AMD64_IBSBRTARGET 0xc001103b +#define MSR_AMD64_ICIBSEXTDCTL 0xc001103c #define MSR_AMD64_IBSOPDATA4 0xc001103d #define MSR_AMD64_IBS_REG_COUNT_MAX 8 /* includes MSR_AMD64_IBSBRTARGET */ +#define MSR_AMD64_SEV_ES_GHCB 0xc0010130 #define MSR_AMD64_SEV 0xc0010131 #define MSR_AMD64_SEV_ENABLED_BIT 0 +#define MSR_AMD64_SEV_ES_ENABLED_BIT 1 #define MSR_AMD64_SEV_ENABLED BIT_ULL(MSR_AMD64_SEV_ENABLED_BIT) +#define MSR_AMD64_SEV_ES_ENABLED BIT_ULL(MSR_AMD64_SEV_ES_ENABLED_BIT) #define MSR_AMD64_VIRT_SPEC_CTRL 0xc001011f @@ -857,11 +864,14 @@ #define MSR_CORE_PERF_FIXED_CTR0 0x00000309 #define MSR_CORE_PERF_FIXED_CTR1 0x0000030a #define MSR_CORE_PERF_FIXED_CTR2 0x0000030b +#define MSR_CORE_PERF_FIXED_CTR3 0x0000030c #define MSR_CORE_PERF_FIXED_CTR_CTRL 0x0000038d #define MSR_CORE_PERF_GLOBAL_STATUS 0x0000038e #define MSR_CORE_PERF_GLOBAL_CTRL 0x0000038f #define MSR_CORE_PERF_GLOBAL_OVF_CTRL 0x00000390 +#define MSR_PERF_METRICS 0x00000329 + /* PERF_GLOBAL_OVF_CTL bits */ #define MSR_CORE_PERF_GLOBAL_OVF_CTRL_TRACE_TOPA_PMI_BIT 55 #define MSR_CORE_PERF_GLOBAL_OVF_CTRL_TRACE_TOPA_PMI (1ULL << MSR_CORE_PERF_GLOBAL_OVF_CTRL_TRACE_TOPA_PMI_BIT) diff --git a/tools/arch/x86/include/asm/required-features.h b/tools/arch/x86/include/asm/required-features.h index 6847d85400a8..3ff0d48469f2 100644 --- a/tools/arch/x86/include/asm/required-features.h +++ b/tools/arch/x86/include/asm/required-features.h @@ -54,7 +54,7 @@ #endif #ifdef CONFIG_X86_64 -#ifdef CONFIG_PARAVIRT +#ifdef CONFIG_PARAVIRT_XXL /* Paravirtualized systems may not have PSE or PGE available */ #define NEED_PSE 0 #define NEED_PGE 0 diff --git a/tools/arch/x86/include/uapi/asm/kvm.h b/tools/arch/x86/include/uapi/asm/kvm.h index 0780f97c1850..89e5f3d1bba8 100644 --- a/tools/arch/x86/include/uapi/asm/kvm.h +++ b/tools/arch/x86/include/uapi/asm/kvm.h @@ -192,6 +192,26 @@ struct kvm_msr_list { __u32 indices[0]; }; +/* Maximum size of any access bitmap in bytes */ +#define KVM_MSR_FILTER_MAX_BITMAP_SIZE 0x600 + +/* for KVM_X86_SET_MSR_FILTER */ +struct kvm_msr_filter_range { +#define KVM_MSR_FILTER_READ (1 << 0) +#define KVM_MSR_FILTER_WRITE (1 << 1) + __u32 flags; + __u32 nmsrs; /* number of msrs in bitmap */ + __u32 base; /* MSR index the bitmap starts at */ + __u8 *bitmap; /* a 1 bit allows the operations in flags, 0 denies */ +}; + +#define KVM_MSR_FILTER_MAX_RANGES 16 +struct kvm_msr_filter { +#define KVM_MSR_FILTER_DEFAULT_ALLOW (0 << 0) +#define KVM_MSR_FILTER_DEFAULT_DENY (1 << 0) + __u32 flags; + struct kvm_msr_filter_range ranges[KVM_MSR_FILTER_MAX_RANGES]; +}; struct kvm_cpuid_entry { __u32 function; diff --git a/tools/arch/x86/include/uapi/asm/svm.h b/tools/arch/x86/include/uapi/asm/svm.h index 2e8a30f06c74..f1d8307454e0 100644 --- a/tools/arch/x86/include/uapi/asm/svm.h +++ b/tools/arch/x86/include/uapi/asm/svm.h @@ -29,6 +29,7 @@ #define SVM_EXIT_WRITE_DR6 0x036 #define SVM_EXIT_WRITE_DR7 0x037 #define SVM_EXIT_EXCP_BASE 0x040 +#define SVM_EXIT_LAST_EXCP 0x05f #define SVM_EXIT_INTR 0x060 #define SVM_EXIT_NMI 0x061 #define SVM_EXIT_SMI 0x062 @@ -76,10 +77,21 @@ #define SVM_EXIT_MWAIT_COND 0x08c #define SVM_EXIT_XSETBV 0x08d #define SVM_EXIT_RDPRU 0x08e +#define SVM_EXIT_INVPCID 0x0a2 #define SVM_EXIT_NPF 0x400 #define SVM_EXIT_AVIC_INCOMPLETE_IPI 0x401 #define SVM_EXIT_AVIC_UNACCELERATED_ACCESS 0x402 +/* SEV-ES software-defined VMGEXIT events */ +#define SVM_VMGEXIT_MMIO_READ 0x80000001 +#define SVM_VMGEXIT_MMIO_WRITE 0x80000002 +#define SVM_VMGEXIT_NMI_COMPLETE 0x80000003 +#define SVM_VMGEXIT_AP_HLT_LOOP 0x80000004 +#define SVM_VMGEXIT_AP_JUMP_TABLE 0x80000005 +#define SVM_VMGEXIT_SET_AP_JUMP_TABLE 0 +#define SVM_VMGEXIT_GET_AP_JUMP_TABLE 1 +#define SVM_VMGEXIT_UNSUPPORTED_EVENT 0x8000ffff + #define SVM_EXIT_ERR -1 #define SVM_EXIT_REASONS \ @@ -171,6 +183,7 @@ { SVM_EXIT_MONITOR, "monitor" }, \ { SVM_EXIT_MWAIT, "mwait" }, \ { SVM_EXIT_XSETBV, "xsetbv" }, \ + { SVM_EXIT_INVPCID, "invpcid" }, \ { SVM_EXIT_NPF, "npf" }, \ { SVM_EXIT_AVIC_INCOMPLETE_IPI, "avic_incomplete_ipi" }, \ { SVM_EXIT_AVIC_UNACCELERATED_ACCESS, "avic_unaccelerated_access" }, \ diff --git a/tools/build/feature/test-all.c b/tools/build/feature/test-all.c index a04e81321c66..464873883396 100644 --- a/tools/build/feature/test-all.c +++ b/tools/build/feature/test-all.c @@ -185,7 +185,6 @@ int main(int argc, char *argv[]) main_test_libperl(); main_test_hello(); main_test_libelf(); - main_test_libelf_mmap(); main_test_get_current_dir_name(); main_test_gettid(); main_test_glibc(); diff --git a/tools/include/linux/compiler-gcc.h b/tools/include/linux/compiler-gcc.h index b9d4322e1e65..95c072b70d0e 100644 --- a/tools/include/linux/compiler-gcc.h +++ b/tools/include/linux/compiler-gcc.h @@ -27,18 +27,6 @@ #define __pure __attribute__((pure)) #endif #define noinline __attribute__((noinline)) -#ifdef __has_attribute -#if __has_attribute(disable_tail_calls) -#define __no_tail_call __attribute__((disable_tail_calls)) -#endif -#endif -#ifndef __no_tail_call -#if GCC_VERSION > 40201 -#define __no_tail_call __attribute__((optimize("no-optimize-sibling-calls"))) -#else -#define __no_tail_call -#endif -#endif #ifndef __packed #define __packed __attribute__((packed)) #endif diff --git a/tools/include/linux/compiler.h b/tools/include/linux/compiler.h index 2b3f7353e891..d22a974372c0 100644 --- a/tools/include/linux/compiler.h +++ b/tools/include/linux/compiler.h @@ -47,9 +47,6 @@ #ifndef noinline #define noinline #endif -#ifndef __no_tail_call -#define __no_tail_call -#endif /* Are two types/vars the same type (ignoring qualifiers)? */ #ifndef __same_type diff --git a/tools/include/uapi/asm-generic/unistd.h b/tools/include/uapi/asm-generic/unistd.h index f2b5d72a46c2..2056318988f7 100644 --- a/tools/include/uapi/asm-generic/unistd.h +++ b/tools/include/uapi/asm-generic/unistd.h @@ -857,9 +857,11 @@ __SYSCALL(__NR_openat2, sys_openat2) __SYSCALL(__NR_pidfd_getfd, sys_pidfd_getfd) #define __NR_faccessat2 439 __SYSCALL(__NR_faccessat2, sys_faccessat2) +#define __NR_process_madvise 440 +__SYSCALL(__NR_process_madvise, sys_process_madvise) #undef __NR_syscalls -#define __NR_syscalls 440 +#define __NR_syscalls 441 /* * 32 bit systems traditionally used different diff --git a/tools/include/uapi/drm/i915_drm.h b/tools/include/uapi/drm/i915_drm.h index 00546062e023..fa1f3d62f9a6 100644 --- a/tools/include/uapi/drm/i915_drm.h +++ b/tools/include/uapi/drm/i915_drm.h @@ -619,6 +619,12 @@ typedef struct drm_i915_irq_wait { */ #define I915_PARAM_PERF_REVISION 54 +/* Query whether DRM_I915_GEM_EXECBUFFER2 supports supplying an array of + * timeline syncobj through drm_i915_gem_execbuffer_ext_timeline_fences. See + * I915_EXEC_USE_EXTENSIONS. + */ +#define I915_PARAM_HAS_EXEC_TIMELINE_FENCES 55 + /* Must be kept compact -- no holes and well documented */ typedef struct drm_i915_getparam { @@ -1046,6 +1052,38 @@ struct drm_i915_gem_exec_fence { __u32 flags; }; +/** + * See drm_i915_gem_execbuffer_ext_timeline_fences. + */ +#define DRM_I915_GEM_EXECBUFFER_EXT_TIMELINE_FENCES 0 + +/** + * This structure describes an array of drm_syncobj and associated points for + * timeline variants of drm_syncobj. It is invalid to append this structure to + * the execbuf if I915_EXEC_FENCE_ARRAY is set. + */ +struct drm_i915_gem_execbuffer_ext_timeline_fences { + struct i915_user_extension base; + + /** + * Number of element in the handles_ptr & value_ptr arrays. + */ + __u64 fence_count; + + /** + * Pointer to an array of struct drm_i915_gem_exec_fence of length + * fence_count. + */ + __u64 handles_ptr; + + /** + * Pointer to an array of u64 values of length fence_count. Values + * must be 0 for a binary drm_syncobj. A Value of 0 for a timeline + * drm_syncobj is invalid as it turns a drm_syncobj into a binary one. + */ + __u64 values_ptr; +}; + struct drm_i915_gem_execbuffer2 { /** * List of gem_exec_object2 structs @@ -1062,8 +1100,14 @@ struct drm_i915_gem_execbuffer2 { __u32 num_cliprects; /** * This is a struct drm_clip_rect *cliprects if I915_EXEC_FENCE_ARRAY - * is not set. If I915_EXEC_FENCE_ARRAY is set, then this is a - * struct drm_i915_gem_exec_fence *fences. + * & I915_EXEC_USE_EXTENSIONS are not set. + * + * If I915_EXEC_FENCE_ARRAY is set, then this is a pointer to an array + * of struct drm_i915_gem_exec_fence and num_cliprects is the length + * of the array. + * + * If I915_EXEC_USE_EXTENSIONS is set, then this is a pointer to a + * single struct i915_user_extension and num_cliprects is 0. */ __u64 cliprects_ptr; #define I915_EXEC_RING_MASK (0x3f) @@ -1181,7 +1225,16 @@ struct drm_i915_gem_execbuffer2 { */ #define I915_EXEC_FENCE_SUBMIT (1 << 20) -#define __I915_EXEC_UNKNOWN_FLAGS (-(I915_EXEC_FENCE_SUBMIT << 1)) +/* + * Setting I915_EXEC_USE_EXTENSIONS implies that + * drm_i915_gem_execbuffer2.cliprects_ptr is treated as a pointer to an linked + * list of i915_user_extension. Each i915_user_extension node is the base of a + * larger structure. The list of supported structures are listed in the + * drm_i915_gem_execbuffer_ext enum. + */ +#define I915_EXEC_USE_EXTENSIONS (1 << 21) + +#define __I915_EXEC_UNKNOWN_FLAGS (-(I915_EXEC_USE_EXTENSIONS << 1)) #define I915_EXEC_CONTEXT_ID_MASK (0xffffffff) #define i915_execbuffer2_set_context_id(eb2, context) \ diff --git a/tools/include/uapi/linux/fscrypt.h b/tools/include/uapi/linux/fscrypt.h index 7875709ccfeb..e5de60336938 100644 --- a/tools/include/uapi/linux/fscrypt.h +++ b/tools/include/uapi/linux/fscrypt.h @@ -45,7 +45,6 @@ struct fscrypt_policy_v1 { __u8 flags; __u8 master_key_descriptor[FSCRYPT_KEY_DESCRIPTOR_SIZE]; }; -#define fscrypt_policy fscrypt_policy_v1 /* * Process-subscribed "logon" key description prefix and payload format. @@ -156,9 +155,9 @@ struct fscrypt_get_key_status_arg { __u32 __out_reserved[13]; }; -#define FS_IOC_SET_ENCRYPTION_POLICY _IOR('f', 19, struct fscrypt_policy) +#define FS_IOC_SET_ENCRYPTION_POLICY _IOR('f', 19, struct fscrypt_policy_v1) #define FS_IOC_GET_ENCRYPTION_PWSALT _IOW('f', 20, __u8[16]) -#define FS_IOC_GET_ENCRYPTION_POLICY _IOW('f', 21, struct fscrypt_policy) +#define FS_IOC_GET_ENCRYPTION_POLICY _IOW('f', 21, struct fscrypt_policy_v1) #define FS_IOC_GET_ENCRYPTION_POLICY_EX _IOWR('f', 22, __u8[9]) /* size + version */ #define FS_IOC_ADD_ENCRYPTION_KEY _IOWR('f', 23, struct fscrypt_add_key_arg) #define FS_IOC_REMOVE_ENCRYPTION_KEY _IOWR('f', 24, struct fscrypt_remove_key_arg) @@ -170,6 +169,7 @@ struct fscrypt_get_key_status_arg { /* old names; don't add anything new here! */ #ifndef __KERNEL__ +#define fscrypt_policy fscrypt_policy_v1 #define FS_KEY_DESCRIPTOR_SIZE FSCRYPT_KEY_DESCRIPTOR_SIZE #define FS_POLICY_FLAGS_PAD_4 FSCRYPT_POLICY_FLAGS_PAD_4 #define FS_POLICY_FLAGS_PAD_8 FSCRYPT_POLICY_FLAGS_PAD_8 diff --git a/tools/include/uapi/linux/kvm.h b/tools/include/uapi/linux/kvm.h index 7d8eced6f459..ca41220b40b8 100644 --- a/tools/include/uapi/linux/kvm.h +++ b/tools/include/uapi/linux/kvm.h @@ -248,6 +248,8 @@ struct kvm_hyperv_exit { #define KVM_EXIT_IOAPIC_EOI 26 #define KVM_EXIT_HYPERV 27 #define KVM_EXIT_ARM_NISV 28 +#define KVM_EXIT_X86_RDMSR 29 +#define KVM_EXIT_X86_WRMSR 30 /* For KVM_EXIT_INTERNAL_ERROR */ /* Emulate instruction failed. */ @@ -413,6 +415,17 @@ struct kvm_run { __u64 esr_iss; __u64 fault_ipa; } arm_nisv; + /* KVM_EXIT_X86_RDMSR / KVM_EXIT_X86_WRMSR */ + struct { + __u8 error; /* user -> kernel */ + __u8 pad[7]; +#define KVM_MSR_EXIT_REASON_INVAL (1 << 0) +#define KVM_MSR_EXIT_REASON_UNKNOWN (1 << 1) +#define KVM_MSR_EXIT_REASON_FILTER (1 << 2) + __u32 reason; /* kernel -> user */ + __u32 index; /* kernel -> user */ + __u64 data; /* kernel <-> user */ + } msr; /* Fix the size of the union. */ char padding[256]; }; @@ -1037,6 +1050,9 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_SMALLER_MAXPHYADDR 185 #define KVM_CAP_S390_DIAG318 186 #define KVM_CAP_STEAL_TIME 187 +#define KVM_CAP_X86_USER_SPACE_MSR 188 +#define KVM_CAP_X86_MSR_FILTER 189 +#define KVM_CAP_ENFORCE_PV_FEATURE_CPUID 190 #ifdef KVM_CAP_IRQ_ROUTING @@ -1538,6 +1554,9 @@ struct kvm_pv_cmd { /* Available with KVM_CAP_S390_PROTECTED */ #define KVM_S390_PV_COMMAND _IOWR(KVMIO, 0xc5, struct kvm_pv_cmd) +/* Available with KVM_CAP_X86_MSR_FILTER */ +#define KVM_X86_SET_MSR_FILTER _IOW(KVMIO, 0xc6, struct kvm_msr_filter) + /* Secure Encrypted Virtualization command */ enum sev_cmd_id { /* Guest initialization commands */ diff --git a/tools/include/uapi/linux/mman.h b/tools/include/uapi/linux/mman.h index 923cc162609c..f55bc680b5b0 100644 --- a/tools/include/uapi/linux/mman.h +++ b/tools/include/uapi/linux/mman.h @@ -27,6 +27,7 @@ #define MAP_HUGE_SHIFT HUGETLB_FLAG_ENCODE_SHIFT #define MAP_HUGE_MASK HUGETLB_FLAG_ENCODE_MASK +#define MAP_HUGE_16KB HUGETLB_FLAG_ENCODE_16KB #define MAP_HUGE_64KB HUGETLB_FLAG_ENCODE_64KB #define MAP_HUGE_512KB HUGETLB_FLAG_ENCODE_512KB #define MAP_HUGE_1MB HUGETLB_FLAG_ENCODE_1MB diff --git a/tools/include/uapi/linux/mount.h b/tools/include/uapi/linux/mount.h index 96a0240f23fe..dd8306ea336c 100644 --- a/tools/include/uapi/linux/mount.h +++ b/tools/include/uapi/linux/mount.h @@ -16,6 +16,7 @@ #define MS_REMOUNT 32 /* Alter flags of a mounted FS */ #define MS_MANDLOCK 64 /* Allow mandatory locks on an FS */ #define MS_DIRSYNC 128 /* Directory modifications are synchronous */ +#define MS_NOSYMFOLLOW 256 /* Do not follow symlinks */ #define MS_NOATIME 1024 /* Do not update access times. */ #define MS_NODIRATIME 2048 /* Do not update directory access times */ #define MS_BIND 4096 diff --git a/tools/include/uapi/linux/perf_event.h b/tools/include/uapi/linux/perf_event.h index 3e5dcdd48a49..b95d3c485d27 100644 --- a/tools/include/uapi/linux/perf_event.h +++ b/tools/include/uapi/linux/perf_event.h @@ -1196,7 +1196,7 @@ union perf_mem_data_src { #define PERF_MEM_SNOOPX_FWD 0x01 /* forward */ /* 1 free */ -#define PERF_MEM_SNOOPX_SHIFT 38 +#define PERF_MEM_SNOOPX_SHIFT 38 /* locked instruction */ #define PERF_MEM_LOCK_NA 0x01 /* not available */ diff --git a/tools/include/uapi/linux/prctl.h b/tools/include/uapi/linux/prctl.h index 07b4f8131e36..7f0827705c9a 100644 --- a/tools/include/uapi/linux/prctl.h +++ b/tools/include/uapi/linux/prctl.h @@ -233,6 +233,15 @@ struct prctl_mm_map { #define PR_SET_TAGGED_ADDR_CTRL 55 #define PR_GET_TAGGED_ADDR_CTRL 56 # define PR_TAGGED_ADDR_ENABLE (1UL << 0) +/* MTE tag check fault modes */ +# define PR_MTE_TCF_SHIFT 1 +# define PR_MTE_TCF_NONE (0UL << PR_MTE_TCF_SHIFT) +# define PR_MTE_TCF_SYNC (1UL << PR_MTE_TCF_SHIFT) +# define PR_MTE_TCF_ASYNC (2UL << PR_MTE_TCF_SHIFT) +# define PR_MTE_TCF_MASK (3UL << PR_MTE_TCF_SHIFT) +/* MTE tag inclusion mask */ +# define PR_MTE_TAG_SHIFT 3 +# define PR_MTE_TAG_MASK (0xffffUL << PR_MTE_TAG_SHIFT) /* Control reclaim behavior when allocating memory */ #define PR_SET_IO_FLUSHER 57 diff --git a/tools/include/uapi/linux/vhost.h b/tools/include/uapi/linux/vhost.h index 75232185324a..c998860d7bbc 100644 --- a/tools/include/uapi/linux/vhost.h +++ b/tools/include/uapi/linux/vhost.h @@ -146,4 +146,8 @@ /* Set event fd for config interrupt*/ #define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) + +/* Get the valid iova range */ +#define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \ + struct vhost_vdpa_iova_range) #endif diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config index 6890fc4b063a..ce8516e4de34 100644 --- a/tools/perf/Makefile.config +++ b/tools/perf/Makefile.config @@ -749,6 +749,7 @@ else PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS)) PERL_EMBED_CCOPTS = $(shell perl -MExtUtils::Embed -e ccopts 2>/dev/null) PERL_EMBED_CCOPTS := $(filter-out -specs=%,$(PERL_EMBED_CCOPTS)) + PERL_EMBED_CCOPTS := $(filter-out -flto=auto -ffat-lto-objects, $(PERL_EMBED_CCOPTS)) PERL_EMBED_LDOPTS := $(filter-out -specs=%,$(PERL_EMBED_LDOPTS)) FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS) diff --git a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl index 347809649ba2..379819244b91 100644 --- a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl +++ b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl @@ -361,12 +361,13 @@ 437 common openat2 sys_openat2 438 common pidfd_getfd sys_pidfd_getfd 439 common faccessat2 sys_faccessat2 +440 common process_madvise sys_process_madvise # -# x32-specific system call numbers start at 512 to avoid cache impact -# for native 64-bit operation. The __x32_compat_sys stubs are created -# on-the-fly for compat_sys_*() compatibility system calls if X86_X32 -# is defined. +# Due to a historical design error, certain syscalls are numbered differently +# in x32 as compared to native x86_64. These syscalls have numbers 512-547. +# Do not add new syscalls to this range. Numbers 548 and above are available +# for non-x32 use. # 512 x32 rt_sigaction compat_sys_rt_sigaction 513 x32 rt_sigreturn compat_sys_x32_rt_sigreturn @@ -404,3 +405,5 @@ 545 x32 execveat compat_sys_execveat 546 x32 preadv2 compat_sys_preadv64v2 547 x32 pwritev2 compat_sys_pwritev64v2 +# This is the end of the legacy x32 range. Numbers 548 and above are +# not special and are not to be used for x32-specific syscalls. diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index 44a75f234db1..de80534473af 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -4639,9 +4639,9 @@ do_concat: err = 0; if (lists[0]) { - struct option o = OPT_CALLBACK('e', "event", &trace->evlist, "event", - "event selector. use 'perf list' to list available events", - parse_events_option); + struct option o = { + .value = &trace->evlist, + }; err = parse_events_option(&o, lists[0], 0); } out: @@ -4655,9 +4655,12 @@ static int trace__parse_cgroups(const struct option *opt, const char *str, int u { struct trace *trace = opt->value; - if (!list_empty(&trace->evlist->core.entries)) - return parse_cgroups(opt, str, unset); - + if (!list_empty(&trace->evlist->core.entries)) { + struct option o = { + .value = &trace->evlist, + }; + return parse_cgroups(&o, str, unset); + } trace->cgroup = evlist__findnew_cgroup(trace->evlist, str); return 0; diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json b/tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json index de3193552277..00f4fcffa815 100644 --- a/tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json +++ b/tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json @@ -329,7 +329,7 @@ }, { "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]", - "MetricExpr": "( 64 * ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) / 1000000000 ) / duration_time", + "MetricExpr": "( ( ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) * 1048576 ) / 1000000000 ) / duration_time", "MetricGroup": "Memory_BW;SoC", "MetricName": "DRAM_BW_Use" }, diff --git a/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json b/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json index f31794d3b926..0dd8b13b5cfb 100644 --- a/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json +++ b/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json @@ -323,7 +323,7 @@ }, { "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]", - "MetricExpr": "( 64 * ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) / 1000000000 ) / duration_time", + "MetricExpr": "( ( ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) * 1048576 ) / 1000000000 ) / duration_time", "MetricGroup": "Memory_BW;SoC", "MetricName": "DRAM_BW_Use" }, diff --git a/tools/perf/tests/dwarf-unwind.c b/tools/perf/tests/dwarf-unwind.c index 2491d167bf76..83638097c3bc 100644 --- a/tools/perf/tests/dwarf-unwind.c +++ b/tools/perf/tests/dwarf-unwind.c @@ -95,7 +95,7 @@ static int unwind_entry(struct unwind_entry *entry, void *arg) return strcmp((const char *) symbol, funcs[idx]); } -__no_tail_call noinline int test_dwarf_unwind__thread(struct thread *thread) +noinline int test_dwarf_unwind__thread(struct thread *thread) { struct perf_sample sample; unsigned long cnt = 0; @@ -126,7 +126,7 @@ __no_tail_call noinline int test_dwarf_unwind__thread(struct thread *thread) static int global_unwind_retval = -INT_MAX; -__no_tail_call noinline int test_dwarf_unwind__compare(void *p1, void *p2) +noinline int test_dwarf_unwind__compare(void *p1, void *p2) { /* Any possible value should be 'thread' */ struct thread *thread = *(struct thread **)p1; @@ -145,7 +145,7 @@ __no_tail_call noinline int test_dwarf_unwind__compare(void *p1, void *p2) return p1 - p2; } -__no_tail_call noinline int test_dwarf_unwind__krava_3(struct thread *thread) +noinline int test_dwarf_unwind__krava_3(struct thread *thread) { struct thread *array[2] = {thread, thread}; void *fp = &bsearch; @@ -164,12 +164,12 @@ __no_tail_call noinline int test_dwarf_unwind__krava_3(struct thread *thread) return global_unwind_retval; } -__no_tail_call noinline int test_dwarf_unwind__krava_2(struct thread *thread) +noinline int test_dwarf_unwind__krava_2(struct thread *thread) { return test_dwarf_unwind__krava_3(thread); } -__no_tail_call noinline int test_dwarf_unwind__krava_1(struct thread *thread) +noinline int test_dwarf_unwind__krava_1(struct thread *thread) { return test_dwarf_unwind__krava_2(thread); } diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c index a07626f07208..b0e1880cf992 100644 --- a/tools/perf/ui/browsers/hists.c +++ b/tools/perf/ui/browsers/hists.c @@ -2963,7 +2963,7 @@ static int perf_evsel__hists_browse(struct evsel *evsel, int nr_events, struct popup_action actions[MAX_OPTIONS]; int nr_options = 0; int key = -1; - char buf[64]; + char buf[128]; int delay_secs = hbt ? hbt->refresh : 0; #define HIST_BROWSER_HELP_COMMON \ diff --git a/tools/perf/util/build-id.c b/tools/perf/util/build-id.c index 8763772f1095..6b410c3d52dc 100644 --- a/tools/perf/util/build-id.c +++ b/tools/perf/util/build-id.c @@ -102,6 +102,8 @@ int build_id__sprintf(const struct build_id *build_id, char *bf) const u8 *raw = build_id->data; size_t i; + bf[0] = 0x0; + for (i = 0; i < build_id->size; ++i) { sprintf(bid, "%02x", *raw); ++raw; diff --git a/tools/perf/util/hashmap.c b/tools/perf/util/hashmap.c index a405dad068f5..3c20b126d60d 100644 --- a/tools/perf/util/hashmap.c +++ b/tools/perf/util/hashmap.c @@ -15,6 +15,9 @@ /* make sure libbpf doesn't use kernel-only integer typedefs */ #pragma GCC poison u8 u16 u32 u64 s8 s16 s32 s64 +/* prevent accidental re-addition of reallocarray() */ +#pragma GCC poison reallocarray + /* start with 4 buckets */ #define HASHMAP_MIN_CAP_BITS 2 diff --git a/tools/perf/util/hashmap.h b/tools/perf/util/hashmap.h index e0af36b0e5d8..d9b385fe808c 100644 --- a/tools/perf/util/hashmap.h +++ b/tools/perf/util/hashmap.h @@ -25,6 +25,18 @@ static inline size_t hash_bits(size_t h, int bits) #endif } +/* generic C-string hashing function */ +static inline size_t str_hash(const char *s) +{ + size_t h = 0; + + while (*s) { + h = h * 31 + *s; + s++; + } + return h; +} + typedef size_t (*hashmap_hash_fn)(const void *key, void *ctx); typedef bool (*hashmap_equal_fn)(const void *key1, const void *key2, void *ctx); diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c index 7d4194ffc5b0..15385ea00190 100644 --- a/tools/perf/util/machine.c +++ b/tools/perf/util/machine.c @@ -786,11 +786,20 @@ static int machine__process_ksymbol_unregister(struct machine *machine, union perf_event *event, struct perf_sample *sample __maybe_unused) { + struct symbol *sym; struct map *map; map = maps__find(&machine->kmaps, event->ksymbol.addr); - if (map) + if (!map) + return 0; + + if (map != machine->vmlinux_map) maps__remove(&machine->kmaps, map); + else { + sym = dso__find_symbol(map->dso, map->map_ip(map, map->start)); + if (sym) + dso__delete_symbol(map->dso, sym); + } return 0; } diff --git a/tools/perf/util/scripting-engines/trace-event-python.c b/tools/perf/util/scripting-engines/trace-event-python.c index 7cbd024e3e63..c83c2c6564e0 100644 --- a/tools/perf/util/scripting-engines/trace-event-python.c +++ b/tools/perf/util/scripting-engines/trace-event-python.c @@ -1592,7 +1592,6 @@ static void _free_command_line(wchar_t **command_line, int num) static int python_start_script(const char *script, int argc, const char **argv) { struct tables *tables = &tables_global; - PyMODINIT_FUNC (*initfunc)(void); #if PY_MAJOR_VERSION < 3 const char **command_line; #else @@ -1607,20 +1606,18 @@ static int python_start_script(const char *script, int argc, const char **argv) FILE *fp; #if PY_MAJOR_VERSION < 3 - initfunc = initperf_trace_context; command_line = malloc((argc + 1) * sizeof(const char *)); command_line[0] = script; for (i = 1; i < argc + 1; i++) command_line[i] = argv[i - 1]; + PyImport_AppendInittab(name, initperf_trace_context); #else - initfunc = PyInit_perf_trace_context; command_line = malloc((argc + 1) * sizeof(wchar_t *)); command_line[0] = Py_DecodeLocale(script, NULL); for (i = 1; i < argc + 1; i++) command_line[i] = Py_DecodeLocale(argv[i - 1], NULL); + PyImport_AppendInittab(name, PyInit_perf_trace_context); #endif - - PyImport_AppendInittab(name, initfunc); Py_Initialize(); #if PY_MAJOR_VERSION < 3 diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c index 7a5f03764702..098080287c68 100644 --- a/tools/perf/util/session.c +++ b/tools/perf/util/session.c @@ -595,6 +595,7 @@ static void perf_event__mmap2_swap(union perf_event *event, event->mmap2.maj = bswap_32(event->mmap2.maj); event->mmap2.min = bswap_32(event->mmap2.min); event->mmap2.ino = bswap_64(event->mmap2.ino); + event->mmap2.ino_generation = bswap_64(event->mmap2.ino_generation); if (sample_id_all) { void *data = &event->mmap2.filename; @@ -710,6 +711,18 @@ static void perf_event__namespaces_swap(union perf_event *event, swap_sample_id_all(event, &event->namespaces.link_info[i]); } +static void perf_event__cgroup_swap(union perf_event *event, bool sample_id_all) +{ + event->cgroup.id = bswap_64(event->cgroup.id); + + if (sample_id_all) { + void *data = &event->cgroup.path; + + data += PERF_ALIGN(strlen(data) + 1, sizeof(u64)); + swap_sample_id_all(event, data); + } +} + static u8 revbyte(u8 b) { int rev = (b >> 4) | ((b & 0xf) << 4); @@ -952,6 +965,7 @@ static perf_event__swap_op perf_event__swap_ops[] = { [PERF_RECORD_SWITCH] = perf_event__switch_swap, [PERF_RECORD_SWITCH_CPU_WIDE] = perf_event__switch_swap, [PERF_RECORD_NAMESPACES] = perf_event__namespaces_swap, + [PERF_RECORD_CGROUP] = perf_event__cgroup_swap, [PERF_RECORD_TEXT_POKE] = perf_event__text_poke_swap, [PERF_RECORD_HEADER_ATTR] = perf_event__hdr_attr_swap, [PERF_RECORD_HEADER_EVENT_TYPE] = perf_event__event_type_swap, diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index 6138866665df..0d14abdf3d72 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -515,6 +515,13 @@ void dso__insert_symbol(struct dso *dso, struct symbol *sym) } } +void dso__delete_symbol(struct dso *dso, struct symbol *sym) +{ + rb_erase_cached(&sym->rb_node, &dso->symbols); + symbol__delete(sym); + dso__reset_find_symbol_cache(dso); +} + struct symbol *dso__find_symbol(struct dso *dso, u64 addr) { if (dso->last_find_result.addr != addr || dso->last_find_result.symbol == NULL) { diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h index f4801c488def..954d6a049ee2 100644 --- a/tools/perf/util/symbol.h +++ b/tools/perf/util/symbol.h @@ -131,6 +131,8 @@ int dso__load_kallsyms(struct dso *dso, const char *filename, struct map *map); void dso__insert_symbol(struct dso *dso, struct symbol *sym); +void dso__delete_symbol(struct dso *dso, + struct symbol *sym); struct symbol *dso__find_symbol(struct dso *dso, u64 addr); struct symbol *dso__find_symbol_by_name(struct dso *dso, const char *name); diff --git a/tools/testing/kunit/kunit_parser.py b/tools/testing/kunit/kunit_parser.py index 8019e3dd4c32..84a1af2581f5 100644 --- a/tools/testing/kunit/kunit_parser.py +++ b/tools/testing/kunit/kunit_parser.py @@ -66,7 +66,6 @@ def isolate_kunit_output(kernel_output): def raw_output(kernel_output): for line in kernel_output: print(line) - yield line DIVIDER = '=' * 60 @@ -242,7 +241,7 @@ def parse_test_suite(lines: List[str], expected_suite_index: int) -> TestSuite: return None test_suite.name = name expected_test_case_num = parse_subtest_plan(lines) - if not expected_test_case_num: + if expected_test_case_num is None: return None while expected_test_case_num > 0: test_case = parse_test_case(lines) diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index 99c3c5671ea4..0b60855fb819 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -179,7 +179,7 @@ class KUnitParserTest(unittest.TestCase): print_mock = mock.patch('builtins.print').start() result = kunit_parser.parse_run_tests( kunit_parser.isolate_kunit_output(file.readlines())) - print_mock.assert_any_call(StrContains("no kunit output detected")) + print_mock.assert_any_call(StrContains('no tests run!')) print_mock.stop() file.close() @@ -198,39 +198,57 @@ class KUnitParserTest(unittest.TestCase): 'test_data/test_config_printk_time.log') with open(prefix_log) as file: result = kunit_parser.parse_run_tests(file.readlines()) - self.assertEqual('kunit-resource-test', result.suites[0].name) + self.assertEqual( + kunit_parser.TestStatus.SUCCESS, + result.status) + self.assertEqual('kunit-resource-test', result.suites[0].name) def test_ignores_multiple_prefixes(self): prefix_log = get_absolute_path( 'test_data/test_multiple_prefixes.log') with open(prefix_log) as file: result = kunit_parser.parse_run_tests(file.readlines()) - self.assertEqual('kunit-resource-test', result.suites[0].name) + self.assertEqual( + kunit_parser.TestStatus.SUCCESS, + result.status) + self.assertEqual('kunit-resource-test', result.suites[0].name) def test_prefix_mixed_kernel_output(self): mixed_prefix_log = get_absolute_path( 'test_data/test_interrupted_tap_output.log') with open(mixed_prefix_log) as file: result = kunit_parser.parse_run_tests(file.readlines()) - self.assertEqual('kunit-resource-test', result.suites[0].name) + self.assertEqual( + kunit_parser.TestStatus.SUCCESS, + result.status) + self.assertEqual('kunit-resource-test', result.suites[0].name) def test_prefix_poundsign(self): pound_log = get_absolute_path('test_data/test_pound_sign.log') with open(pound_log) as file: result = kunit_parser.parse_run_tests(file.readlines()) - self.assertEqual('kunit-resource-test', result.suites[0].name) + self.assertEqual( + kunit_parser.TestStatus.SUCCESS, + result.status) + self.assertEqual('kunit-resource-test', result.suites[0].name) def test_kernel_panic_end(self): panic_log = get_absolute_path('test_data/test_kernel_panic_interrupt.log') with open(panic_log) as file: result = kunit_parser.parse_run_tests(file.readlines()) - self.assertEqual('kunit-resource-test', result.suites[0].name) + self.assertEqual( + kunit_parser.TestStatus.TEST_CRASHED, + result.status) + self.assertEqual('kunit-resource-test', result.suites[0].name) def test_pound_no_prefix(self): pound_log = get_absolute_path('test_data/test_pound_no_prefix.log') with open(pound_log) as file: result = kunit_parser.parse_run_tests(file.readlines()) - self.assertEqual('kunit-resource-test', result.suites[0].name) + self.assertEqual( + kunit_parser.TestStatus.SUCCESS, + result.status) + self.assertEqual('kunit-resource-test', result.suites[0].name) class KUnitJsonTest(unittest.TestCase): diff --git a/tools/testing/kunit/test_data/test_config_printk_time.log b/tools/testing/kunit/test_data/test_config_printk_time.log index c02ca773946d..6bdb57f76eac 100644 --- a/tools/testing/kunit/test_data/test_config_printk_time.log +++ b/tools/testing/kunit/test_data/test_config_printk_time.log @@ -1,6 +1,7 @@ [ 0.060000] printk: console [mc-1] enabled [ 0.060000] random: get_random_bytes called from init_oops_id+0x35/0x40 with crng_init=0 [ 0.060000] TAP version 14 +[ 0.060000] 1..3 [ 0.060000] # Subtest: kunit-resource-test [ 0.060000] 1..5 [ 0.060000] ok 1 - kunit_resource_test_init_resources @@ -28,4 +29,4 @@ [ 0.060000] Stack: [ 0.060000] 602086f8 601bc260 705c0000 705c0000 [ 0.060000] 602086f8 6005fcec 705c0000 6002c6ab -[ 0.060000] 6005fcec 601bc260 705c0000 3000000010
\ No newline at end of file +[ 0.060000] 6005fcec 601bc260 705c0000 3000000010 diff --git a/tools/testing/kunit/test_data/test_interrupted_tap_output.log b/tools/testing/kunit/test_data/test_interrupted_tap_output.log index 5c73fb3a1c6f..1fb677728abe 100644 --- a/tools/testing/kunit/test_data/test_interrupted_tap_output.log +++ b/tools/testing/kunit/test_data/test_interrupted_tap_output.log @@ -1,6 +1,7 @@ [ 0.060000] printk: console [mc-1] enabled [ 0.060000] random: get_random_bytes called from init_oops_id+0x35/0x40 with crng_init=0 [ 0.060000] TAP version 14 +[ 0.060000] 1..3 [ 0.060000] # Subtest: kunit-resource-test [ 0.060000] 1..5 [ 0.060000] ok 1 - kunit_resource_test_init_resources @@ -34,4 +35,4 @@ [ 0.060000] Stack: [ 0.060000] 602086f8 601bc260 705c0000 705c0000 [ 0.060000] 602086f8 6005fcec 705c0000 6002c6ab -[ 0.060000] 6005fcec 601bc260 705c0000 3000000010
\ No newline at end of file +[ 0.060000] 6005fcec 601bc260 705c0000 3000000010 diff --git a/tools/testing/kunit/test_data/test_kernel_panic_interrupt.log b/tools/testing/kunit/test_data/test_kernel_panic_interrupt.log index c045eee75f27..a014ffe9725e 100644 --- a/tools/testing/kunit/test_data/test_kernel_panic_interrupt.log +++ b/tools/testing/kunit/test_data/test_kernel_panic_interrupt.log @@ -1,6 +1,7 @@ [ 0.060000] printk: console [mc-1] enabled [ 0.060000] random: get_random_bytes called from init_oops_id+0x35/0x40 with crng_init=0 [ 0.060000] TAP version 14 +[ 0.060000] 1..3 [ 0.060000] # Subtest: kunit-resource-test [ 0.060000] 1..5 [ 0.060000] ok 1 - kunit_resource_test_init_resources @@ -22,4 +23,4 @@ [ 0.060000] Stack: [ 0.060000] 602086f8 601bc260 705c0000 705c0000 [ 0.060000] 602086f8 6005fcec 705c0000 6002c6ab -[ 0.060000] 6005fcec 601bc260 705c0000 3000000010
\ No newline at end of file +[ 0.060000] 6005fcec 601bc260 705c0000 3000000010 diff --git a/tools/testing/kunit/test_data/test_multiple_prefixes.log b/tools/testing/kunit/test_data/test_multiple_prefixes.log index bc48407dcc36..0ad78481a0b4 100644 --- a/tools/testing/kunit/test_data/test_multiple_prefixes.log +++ b/tools/testing/kunit/test_data/test_multiple_prefixes.log @@ -1,6 +1,7 @@ [ 0.060000][ T1] printk: console [mc-1] enabled [ 0.060000][ T1] random: get_random_bytes called from init_oops_id+0x35/0x40 with crng_init=0 [ 0.060000][ T1] TAP version 14 +[ 0.060000][ T1] 1..3 [ 0.060000][ T1] # Subtest: kunit-resource-test [ 0.060000][ T1] 1..5 [ 0.060000][ T1] ok 1 - kunit_resource_test_init_resources @@ -28,4 +29,4 @@ [ 0.060000][ T1] Stack: [ 0.060000][ T1] 602086f8 601bc260 705c0000 705c0000 [ 0.060000][ T1] 602086f8 6005fcec 705c0000 6002c6ab -[ 0.060000][ T1] 6005fcec 601bc260 705c0000 3000000010
\ No newline at end of file +[ 0.060000][ T1] 6005fcec 601bc260 705c0000 3000000010 diff --git a/tools/testing/kunit/test_data/test_pound_no_prefix.log b/tools/testing/kunit/test_data/test_pound_no_prefix.log index 2ceb360be7d5..dc4cf09a96d0 100644 --- a/tools/testing/kunit/test_data/test_pound_no_prefix.log +++ b/tools/testing/kunit/test_data/test_pound_no_prefix.log @@ -1,6 +1,7 @@ printk: console [mc-1] enabled random: get_random_bytes called from init_oops_id+0x35/0x40 with crng_init=0 TAP version 14 + 1..3 # Subtest: kunit-resource-test 1..5 ok 1 - kunit_resource_test_init_resources @@ -30,4 +31,4 @@ Stack: 602086f8 601bc260 705c0000 705c0000 602086f8 6005fcec 705c0000 6002c6ab - 6005fcec 601bc260 705c0000 3000000010
\ No newline at end of file + 6005fcec 601bc260 705c0000 3000000010 diff --git a/tools/testing/kunit/test_data/test_pound_sign.log b/tools/testing/kunit/test_data/test_pound_sign.log index 28ffa5ba03bf..3f358e3a7ba0 100644 --- a/tools/testing/kunit/test_data/test_pound_sign.log +++ b/tools/testing/kunit/test_data/test_pound_sign.log @@ -1,6 +1,7 @@ [ 0.060000] printk: console [mc-1] enabled [ 0.060000] random: get_random_bytes called from init_oops_id+0x35/0x40 with crng_init=0 [ 0.060000] TAP version 14 +[ 0.060000] 1..3 [ 0.060000] # Subtest: kunit-resource-test [ 0.060000] 1..5 [ 0.060000] ok 1 - kunit_resource_test_init_resources diff --git a/tools/testing/selftests/arm64/mte/check_buffer_fill.c b/tools/testing/selftests/arm64/mte/check_buffer_fill.c index 242635d79035..c9fa141ebdcc 100644 --- a/tools/testing/selftests/arm64/mte/check_buffer_fill.c +++ b/tools/testing/selftests/arm64/mte/check_buffer_fill.c @@ -417,6 +417,9 @@ int main(int argc, char *argv[]) /* Register SIGSEGV handler */ mte_register_signal(SIGSEGV, mte_default_handler); + /* Set test plan */ + ksft_set_plan(20); + /* Buffer by byte tests */ evaluate_test(check_buffer_by_byte(USE_MMAP, MTE_SYNC_ERR), "Check buffer correctness by byte with sync err mode and mmap memory\n"); diff --git a/tools/testing/selftests/arm64/mte/check_child_memory.c b/tools/testing/selftests/arm64/mte/check_child_memory.c index 97bebdecd29e..43bd94f853ba 100644 --- a/tools/testing/selftests/arm64/mte/check_child_memory.c +++ b/tools/testing/selftests/arm64/mte/check_child_memory.c @@ -163,6 +163,9 @@ int main(int argc, char *argv[]) mte_register_signal(SIGSEGV, mte_default_handler); mte_register_signal(SIGBUS, mte_default_handler); + /* Set test plan */ + ksft_set_plan(12); + evaluate_test(check_child_memory_mapping(USE_MMAP, MTE_SYNC_ERR, MAP_PRIVATE), "Check child anonymous memory with private mapping, precise mode and mmap memory\n"); evaluate_test(check_child_memory_mapping(USE_MMAP, MTE_SYNC_ERR, MAP_SHARED), diff --git a/tools/testing/selftests/arm64/mte/check_ksm_options.c b/tools/testing/selftests/arm64/mte/check_ksm_options.c index bc41ae630c86..3b23c4d61d38 100644 --- a/tools/testing/selftests/arm64/mte/check_ksm_options.c +++ b/tools/testing/selftests/arm64/mte/check_ksm_options.c @@ -140,6 +140,10 @@ int main(int argc, char *argv[]) /* Register signal handlers */ mte_register_signal(SIGBUS, mte_default_handler); mte_register_signal(SIGSEGV, mte_default_handler); + + /* Set test plan */ + ksft_set_plan(4); + /* Enable KSM */ mte_ksm_setup(); diff --git a/tools/testing/selftests/arm64/mte/check_mmap_options.c b/tools/testing/selftests/arm64/mte/check_mmap_options.c index 33b13b86199b..a04b12c21ac9 100644 --- a/tools/testing/selftests/arm64/mte/check_mmap_options.c +++ b/tools/testing/selftests/arm64/mte/check_mmap_options.c @@ -205,7 +205,11 @@ int main(int argc, char *argv[]) mte_register_signal(SIGBUS, mte_default_handler); mte_register_signal(SIGSEGV, mte_default_handler); + /* Set test plan */ + ksft_set_plan(22); + mte_enable_pstate_tco(); + evaluate_test(check_anonymous_memory_mapping(USE_MMAP, MTE_SYNC_ERR, MAP_PRIVATE, TAG_CHECK_OFF), "Check anonymous memory with private mapping, sync error mode, mmap memory and tag check off\n"); evaluate_test(check_file_memory_mapping(USE_MPROTECT, MTE_SYNC_ERR, MAP_PRIVATE, TAG_CHECK_OFF), diff --git a/tools/testing/selftests/arm64/mte/check_tags_inclusion.c b/tools/testing/selftests/arm64/mte/check_tags_inclusion.c index 94d245a0ed56..deaef1f61076 100644 --- a/tools/testing/selftests/arm64/mte/check_tags_inclusion.c +++ b/tools/testing/selftests/arm64/mte/check_tags_inclusion.c @@ -170,6 +170,9 @@ int main(int argc, char *argv[]) /* Register SIGSEGV handler */ mte_register_signal(SIGSEGV, mte_default_handler); + /* Set test plan */ + ksft_set_plan(4); + evaluate_test(check_single_included_tags(USE_MMAP, MTE_SYNC_ERR), "Check an included tag value with sync mode\n"); evaluate_test(check_multiple_included_tags(USE_MMAP, MTE_SYNC_ERR), diff --git a/tools/testing/selftests/arm64/mte/check_user_mem.c b/tools/testing/selftests/arm64/mte/check_user_mem.c index 594e98e76880..4bfa80f2a8c3 100644 --- a/tools/testing/selftests/arm64/mte/check_user_mem.c +++ b/tools/testing/selftests/arm64/mte/check_user_mem.c @@ -92,9 +92,13 @@ int main(int argc, char *argv[]) err = mte_default_setup(); if (err) return err; + /* Register signal handlers */ mte_register_signal(SIGSEGV, mte_default_handler); + /* Set test plan */ + ksft_set_plan(4); + evaluate_test(check_usermem_access_fault(USE_MMAP, MTE_SYNC_ERR, MAP_PRIVATE), "Check memory access from kernel in sync mode, private mapping and mmap memory\n"); evaluate_test(check_usermem_access_fault(USE_MMAP, MTE_SYNC_ERR, MAP_SHARED), diff --git a/tools/testing/selftests/clone3/clone3_cap_checkpoint_restore.c b/tools/testing/selftests/clone3/clone3_cap_checkpoint_restore.c index 55bd387ce7ec..52d3f0364bda 100644 --- a/tools/testing/selftests/clone3/clone3_cap_checkpoint_restore.c +++ b/tools/testing/selftests/clone3/clone3_cap_checkpoint_restore.c @@ -145,7 +145,7 @@ TEST(clone3_cap_checkpoint_restore) test_clone3_supported(); EXPECT_EQ(getuid(), 0) - XFAIL(return, "Skipping all tests as non-root\n"); + SKIP(return, "Skipping all tests as non-root"); memset(&set_tid, 0, sizeof(set_tid)); diff --git a/tools/testing/selftests/core/close_range_test.c b/tools/testing/selftests/core/close_range_test.c index c99b98b0d461..575b391ddc78 100644 --- a/tools/testing/selftests/core/close_range_test.c +++ b/tools/testing/selftests/core/close_range_test.c @@ -44,7 +44,7 @@ TEST(close_range) fd = open("/dev/null", O_RDONLY | O_CLOEXEC); ASSERT_GE(fd, 0) { if (errno == ENOENT) - XFAIL(return, "Skipping test since /dev/null does not exist"); + SKIP(return, "Skipping test since /dev/null does not exist"); } open_fds[i] = fd; @@ -52,7 +52,7 @@ TEST(close_range) EXPECT_EQ(-1, sys_close_range(open_fds[0], open_fds[100], -1)) { if (errno == ENOSYS) - XFAIL(return, "close_range() syscall not supported"); + SKIP(return, "close_range() syscall not supported"); } EXPECT_EQ(0, sys_close_range(open_fds[0], open_fds[50], 0)); @@ -108,7 +108,7 @@ TEST(close_range_unshare) fd = open("/dev/null", O_RDONLY | O_CLOEXEC); ASSERT_GE(fd, 0) { if (errno == ENOENT) - XFAIL(return, "Skipping test since /dev/null does not exist"); + SKIP(return, "Skipping test since /dev/null does not exist"); } open_fds[i] = fd; @@ -197,7 +197,7 @@ TEST(close_range_unshare_capped) fd = open("/dev/null", O_RDONLY | O_CLOEXEC); ASSERT_GE(fd, 0) { if (errno == ENOENT) - XFAIL(return, "Skipping test since /dev/null does not exist"); + SKIP(return, "Skipping test since /dev/null does not exist"); } open_fds[i] = fd; diff --git a/tools/testing/selftests/filesystems/binderfs/binderfs_test.c b/tools/testing/selftests/filesystems/binderfs/binderfs_test.c index 1d27f52c61e6..477cbb042f5b 100644 --- a/tools/testing/selftests/filesystems/binderfs/binderfs_test.c +++ b/tools/testing/selftests/filesystems/binderfs/binderfs_test.c @@ -74,7 +74,7 @@ static int __do_binderfs_test(struct __test_metadata *_metadata) ret = mount(NULL, binderfs_mntpt, "binder", 0, 0); EXPECT_EQ(ret, 0) { if (errno == ENODEV) - XFAIL(goto out, "binderfs missing"); + SKIP(goto out, "binderfs missing"); TH_LOG("%s - Failed to mount binderfs", strerror(errno)); goto rmdir; } @@ -475,10 +475,10 @@ TEST(binderfs_stress) TEST(binderfs_test_privileged) { if (geteuid() != 0) - XFAIL(return, "Tests are not run as root. Skipping privileged tests"); + SKIP(return, "Tests are not run as root. Skipping privileged tests"); if (__do_binderfs_test(_metadata)) - XFAIL(return, "The Android binderfs filesystem is not available"); + SKIP(return, "The Android binderfs filesystem is not available"); } TEST(binderfs_test_unprivileged) @@ -511,7 +511,7 @@ TEST(binderfs_test_unprivileged) ret = wait_for_pid(pid); if (ret) { if (ret == 2) - XFAIL(return, "The Android binderfs filesystem is not available"); + SKIP(return, "The Android binderfs filesystem is not available"); ASSERT_EQ(ret, 0) { TH_LOG("wait_for_pid() failed"); } diff --git a/tools/testing/selftests/filesystems/epoll/epoll_wakeup_test.c b/tools/testing/selftests/filesystems/epoll/epoll_wakeup_test.c index d979ff14775a..8f82f99f7748 100644 --- a/tools/testing/selftests/filesystems/epoll/epoll_wakeup_test.c +++ b/tools/testing/selftests/filesystems/epoll/epoll_wakeup_test.c @@ -3282,4 +3282,99 @@ TEST(epoll60) close(ctx.epfd); } +struct epoll61_ctx { + int epfd; + int evfd; +}; + +static void *epoll61_write_eventfd(void *ctx_) +{ + struct epoll61_ctx *ctx = ctx_; + int64_t l = 1; + + usleep(10950); + write(ctx->evfd, &l, sizeof(l)); + return NULL; +} + +static void *epoll61_epoll_with_timeout(void *ctx_) +{ + struct epoll61_ctx *ctx = ctx_; + struct epoll_event events[1]; + int n; + + n = epoll_wait(ctx->epfd, events, 1, 11); + /* + * If epoll returned the eventfd, write on the eventfd to wake up the + * blocking poller. + */ + if (n == 1) { + int64_t l = 1; + + write(ctx->evfd, &l, sizeof(l)); + } + return NULL; +} + +static void *epoll61_blocking_epoll(void *ctx_) +{ + struct epoll61_ctx *ctx = ctx_; + struct epoll_event events[1]; + + epoll_wait(ctx->epfd, events, 1, -1); + return NULL; +} + +TEST(epoll61) +{ + struct epoll61_ctx ctx; + struct epoll_event ev; + int i, r; + + ctx.epfd = epoll_create1(0); + ASSERT_GE(ctx.epfd, 0); + ctx.evfd = eventfd(0, EFD_NONBLOCK); + ASSERT_GE(ctx.evfd, 0); + + ev.events = EPOLLIN | EPOLLET | EPOLLERR | EPOLLHUP; + ev.data.ptr = NULL; + r = epoll_ctl(ctx.epfd, EPOLL_CTL_ADD, ctx.evfd, &ev); + ASSERT_EQ(r, 0); + + /* + * We are testing a race. Repeat the test case 1000 times to make it + * more likely to fail in case of a bug. + */ + for (i = 0; i < 1000; i++) { + pthread_t threads[3]; + int n; + + /* + * Start 3 threads: + * Thread 1 sleeps for 10.9ms and writes to the evenfd. + * Thread 2 calls epoll with a timeout of 11ms. + * Thread 3 calls epoll with a timeout of -1. + * + * The eventfd write by Thread 1 should either wakeup Thread 2 + * or Thread 3. If it wakes up Thread 2, Thread 2 writes on the + * eventfd to wake up Thread 3. + * + * If no events are missed, all three threads should eventually + * be joinable. + */ + ASSERT_EQ(pthread_create(&threads[0], NULL, + epoll61_write_eventfd, &ctx), 0); + ASSERT_EQ(pthread_create(&threads[1], NULL, + epoll61_epoll_with_timeout, &ctx), 0); + ASSERT_EQ(pthread_create(&threads[2], NULL, + epoll61_blocking_epoll, &ctx), 0); + + for (n = 0; n < ARRAY_SIZE(threads); ++n) + ASSERT_EQ(pthread_join(threads[n], NULL), 0); + } + + close(ctx.epfd); + close(ctx.evfd); +} + TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/ftrace/test.d/dynevent/add_remove_kprobe.tc b/tools/testing/selftests/ftrace/test.d/dynevent/add_remove_kprobe.tc index 3bcd4c3624ee..b4da41d126d5 100644 --- a/tools/testing/selftests/ftrace/test.d/dynevent/add_remove_kprobe.tc +++ b/tools/testing/selftests/ftrace/test.d/dynevent/add_remove_kprobe.tc @@ -6,7 +6,7 @@ echo 0 > events/enable echo > dynamic_events -PLACE=kernel_clone +PLACE=$FUNCTION_FORK echo "p:myevent1 $PLACE" >> dynamic_events echo "r:myevent2 $PLACE" >> dynamic_events diff --git a/tools/testing/selftests/ftrace/test.d/dynevent/clear_select_events.tc b/tools/testing/selftests/ftrace/test.d/dynevent/clear_select_events.tc index 438961971b7e..3a0e2885fff5 100644 --- a/tools/testing/selftests/ftrace/test.d/dynevent/clear_select_events.tc +++ b/tools/testing/selftests/ftrace/test.d/dynevent/clear_select_events.tc @@ -6,7 +6,7 @@ echo 0 > events/enable echo > dynamic_events -PLACE=kernel_clone +PLACE=$FUNCTION_FORK setup_events() { echo "p:myevent1 $PLACE" >> dynamic_events diff --git a/tools/testing/selftests/ftrace/test.d/dynevent/generic_clear_event.tc b/tools/testing/selftests/ftrace/test.d/dynevent/generic_clear_event.tc index a8603bd23e0d..d3e138e8377f 100644 --- a/tools/testing/selftests/ftrace/test.d/dynevent/generic_clear_event.tc +++ b/tools/testing/selftests/ftrace/test.d/dynevent/generic_clear_event.tc @@ -6,7 +6,7 @@ echo 0 > events/enable echo > dynamic_events -PLACE=kernel_clone +PLACE=$FUNCTION_FORK setup_events() { echo "p:myevent1 $PLACE" >> dynamic_events diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-notrace-pid.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-notrace-pid.tc index acb17ce543d2..80541964b927 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-notrace-pid.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-notrace-pid.tc @@ -39,7 +39,7 @@ do_test() { disable_tracing echo do_execve* > set_ftrace_filter - echo *do_fork >> set_ftrace_filter + echo $FUNCTION_FORK >> set_ftrace_filter echo $PID > set_ftrace_notrace_pid echo function > current_tracer diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc index 9f0a9687c773..2f7211254529 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc @@ -39,7 +39,7 @@ do_test() { disable_tracing echo do_execve* > set_ftrace_filter - echo *do_fork >> set_ftrace_filter + echo $FUNCTION_FORK >> set_ftrace_filter echo $PID > set_ftrace_pid echo function > current_tracer diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc index 98305d76bd04..191d116b7883 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc @@ -4,9 +4,9 @@ # requires: set_ftrace_filter # flags: instance -echo kernel_clone:stacktrace >> set_ftrace_filter +echo $FUNCTION_FORK:stacktrace >> set_ftrace_filter -grep -q "kernel_clone:stacktrace:unlimited" set_ftrace_filter +grep -q "$FUNCTION_FORK:stacktrace:unlimited" set_ftrace_filter (echo "forked"; sleep 1) diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions index c5dec55b7d95..a6fac927ee82 100644 --- a/tools/testing/selftests/ftrace/test.d/functions +++ b/tools/testing/selftests/ftrace/test.d/functions @@ -133,6 +133,13 @@ yield() { ping $LOCALHOST -c 1 || sleep .001 || usleep 1 || sleep 1 } +# The fork function in the kernel was renamed from "_do_fork" to +# "kernel_fork". As older tests should still work with older kernels +# as well as newer kernels, check which version of fork is used on this +# kernel so that the tests can use the fork function for the running kernel. +FUNCTION_FORK=`(if grep '\bkernel_clone\b' /proc/kallsyms > /dev/null; then + echo kernel_clone; else echo '_do_fork'; fi)` + # Since probe event command may include backslash, explicitly use printf "%s" # to NOT interpret it. ftrace_errlog_check() { # err-prefix command-with-error-pos-by-^ command-file diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/add_and_remove.tc b/tools/testing/selftests/ftrace/test.d/kprobe/add_and_remove.tc index 9737cd0578a7..2428a3ed78c9 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/add_and_remove.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/add_and_remove.tc @@ -3,7 +3,7 @@ # description: Kprobe dynamic event - adding and removing # requires: kprobe_events -echo p:myevent kernel_clone > kprobe_events +echo p:myevent $FUNCTION_FORK > kprobe_events grep myevent kprobe_events test -d events/kprobes/myevent echo > kprobe_events diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/busy_check.tc b/tools/testing/selftests/ftrace/test.d/kprobe/busy_check.tc index f9a40af76888..010a8b1d6c1d 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/busy_check.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/busy_check.tc @@ -3,7 +3,7 @@ # description: Kprobe dynamic event - busy event check # requires: kprobe_events -echo p:myevent kernel_clone > kprobe_events +echo p:myevent $FUNCTION_FORK > kprobe_events test -d events/kprobes/myevent echo 1 > events/kprobes/myevent/enable echo > kprobe_events && exit_fail # this must fail diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc index eb543d3cfe5f..a96a1dc7014f 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc @@ -3,13 +3,13 @@ # description: Kprobe dynamic event with arguments # requires: kprobe_events -echo 'p:testprobe kernel_clone $stack $stack0 +0($stack)' > kprobe_events +echo "p:testprobe $FUNCTION_FORK \$stack \$stack0 +0(\$stack)" > kprobe_events grep testprobe kprobe_events | grep -q 'arg1=\$stack arg2=\$stack0 arg3=+0(\$stack)' test -d events/kprobes/testprobe echo 1 > events/kprobes/testprobe/enable ( echo "forked") -grep testprobe trace | grep 'kernel_clone' | \ +grep testprobe trace | grep "$FUNCTION_FORK" | \ grep -q 'arg1=0x[[:xdigit:]]* arg2=0x[[:xdigit:]]* arg3=0x[[:xdigit:]]*$' echo 0 > events/kprobes/testprobe/enable diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_comm.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_comm.tc index 4e5b63be51c9..a053ee2e7d77 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_comm.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_comm.tc @@ -5,7 +5,7 @@ grep -A1 "fetcharg:" README | grep -q "\$comm" || exit_unsupported # this is too old -echo 'p:testprobe kernel_clone comm=$comm ' > kprobe_events +echo "p:testprobe $FUNCTION_FORK comm=\$comm " > kprobe_events grep testprobe kprobe_events | grep -q 'comm=$comm' test -d events/kprobes/testprobe diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc index a1d70588ab21..84285a6f60b0 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc @@ -30,13 +30,13 @@ esac : "Test get argument (1)" echo "p:testprobe tracefs_create_dir arg1=+0(${ARG1}):string" > kprobe_events echo 1 > events/kprobes/testprobe/enable -echo "p:test kernel_clone" >> kprobe_events +echo "p:test $FUNCTION_FORK" >> kprobe_events grep -qe "testprobe.* arg1=\"test\"" trace echo 0 > events/kprobes/testprobe/enable : "Test get argument (2)" echo "p:testprobe tracefs_create_dir arg1=+0(${ARG1}):string arg2=+0(${ARG1}):string" > kprobe_events echo 1 > events/kprobes/testprobe/enable -echo "p:test kernel_clone" >> kprobe_events +echo "p:test $FUNCTION_FORK" >> kprobe_events grep -qe "testprobe.* arg1=\"test\" arg2=\"test\"" trace diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_symbol.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_symbol.tc index bd25dd0ba0d0..717130ed4feb 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_symbol.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_symbol.tc @@ -14,12 +14,12 @@ elif ! grep "$SYMBOL\$" /proc/kallsyms; then fi : "Test get basic types symbol argument" -echo "p:testprobe_u kernel_clone arg1=@linux_proc_banner:u64 arg2=@linux_proc_banner:u32 arg3=@linux_proc_banner:u16 arg4=@linux_proc_banner:u8" > kprobe_events -echo "p:testprobe_s kernel_clone arg1=@linux_proc_banner:s64 arg2=@linux_proc_banner:s32 arg3=@linux_proc_banner:s16 arg4=@linux_proc_banner:s8" >> kprobe_events +echo "p:testprobe_u $FUNCTION_FORK arg1=@linux_proc_banner:u64 arg2=@linux_proc_banner:u32 arg3=@linux_proc_banner:u16 arg4=@linux_proc_banner:u8" > kprobe_events +echo "p:testprobe_s $FUNCTION_FORK arg1=@linux_proc_banner:s64 arg2=@linux_proc_banner:s32 arg3=@linux_proc_banner:s16 arg4=@linux_proc_banner:s8" >> kprobe_events if grep -q "x8/16/32/64" README; then - echo "p:testprobe_x kernel_clone arg1=@linux_proc_banner:x64 arg2=@linux_proc_banner:x32 arg3=@linux_proc_banner:x16 arg4=@linux_proc_banner:x8" >> kprobe_events + echo "p:testprobe_x $FUNCTION_FORK arg1=@linux_proc_banner:x64 arg2=@linux_proc_banner:x32 arg3=@linux_proc_banner:x16 arg4=@linux_proc_banner:x8" >> kprobe_events fi -echo "p:testprobe_bf kernel_clone arg1=@linux_proc_banner:b8@4/32" >> kprobe_events +echo "p:testprobe_bf $FUNCTION_FORK arg1=@linux_proc_banner:b8@4/32" >> kprobe_events echo 1 > events/kprobes/enable (echo "forked") echo 0 > events/kprobes/enable @@ -27,7 +27,7 @@ grep "testprobe_[usx]:.* arg1=.* arg2=.* arg3=.* arg4=.*" trace grep "testprobe_bf:.* arg1=.*" trace : "Test get string symbol argument" -echo "p:testprobe_str kernel_clone arg1=@linux_proc_banner:string" > kprobe_events +echo "p:testprobe_str $FUNCTION_FORK arg1=@linux_proc_banner:string" > kprobe_events echo 1 > events/kprobes/enable (echo "forked") echo 0 > events/kprobes/enable diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc index 91fcce1c241c..25b7708eb559 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc @@ -4,7 +4,7 @@ # requires: kprobe_events "x8/16/32/64":README gen_event() { # Bitsize - echo "p:testprobe kernel_clone \$stack0:s$1 \$stack0:u$1 \$stack0:x$1 \$stack0:b4@4/$1" + echo "p:testprobe $FUNCTION_FORK \$stack0:s$1 \$stack0:u$1 \$stack0:x$1 \$stack0:b4@4/$1" } check_types() { # s-type u-type x-type bf-type width diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_user.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_user.tc index a30a9c07290d..d25d01a19778 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_user.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_user.tc @@ -9,12 +9,16 @@ grep -A10 "fetcharg:" README | grep -q '\[u\]<offset>' || exit_unsupported :;: "user-memory access syntax and ustring working on user memory";: echo 'p:myevent do_sys_open path=+0($arg2):ustring path2=+u0($arg2):string' \ > kprobe_events +echo 'p:myevent2 do_sys_openat2 path=+0($arg2):ustring path2=+u0($arg2):string' \ + >> kprobe_events grep myevent kprobe_events | \ grep -q 'path=+0($arg2):ustring path2=+u0($arg2):string' echo 1 > events/kprobes/myevent/enable +echo 1 > events/kprobes/myevent2/enable echo > /dev/null echo 0 > events/kprobes/myevent/enable +echo 0 > events/kprobes/myevent2/enable grep myevent trace | grep -q 'path="/dev/null" path2="/dev/null"' diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc index 0d179094191f..5556292601a4 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc @@ -5,29 +5,29 @@ # prepare echo nop > current_tracer -echo kernel_clone > set_ftrace_filter -echo 'p:testprobe kernel_clone' > kprobe_events +echo $FUNCTION_FORK > set_ftrace_filter +echo "p:testprobe $FUNCTION_FORK" > kprobe_events # kprobe on / ftrace off echo 1 > events/kprobes/testprobe/enable echo > trace ( echo "forked") grep testprobe trace -! grep 'kernel_clone <-' trace +! grep "$FUNCTION_FORK <-" trace # kprobe on / ftrace on echo function > current_tracer echo > trace ( echo "forked") grep testprobe trace -grep 'kernel_clone <-' trace +grep "$FUNCTION_FORK <-" trace # kprobe off / ftrace on echo 0 > events/kprobes/testprobe/enable echo > trace ( echo "forked") ! grep testprobe trace -grep 'kernel_clone <-' trace +grep "$FUNCTION_FORK <-" trace # kprobe on / ftrace on echo 1 > events/kprobes/testprobe/enable @@ -35,11 +35,11 @@ echo function > current_tracer echo > trace ( echo "forked") grep testprobe trace -grep 'kernel_clone <-' trace +grep "$FUNCTION_FORK <-" trace # kprobe on / ftrace off echo nop > current_tracer echo > trace ( echo "forked") grep testprobe trace -! grep 'kernel_clone <-' trace +! grep "$FUNCTION_FORK <-" trace diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_multiprobe.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_multiprobe.tc index 45d90b6c763d..f0d5b7777ed7 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_multiprobe.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_multiprobe.tc @@ -4,7 +4,7 @@ # requires: kprobe_events "Create/append/":README # Choose 2 symbols for target -SYM1=kernel_clone +SYM1=$FUNCTION_FORK SYM2=do_exit EVENT_NAME=kprobes/testevent diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc index 1b5550ef8a9b..fa928b431555 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc @@ -86,15 +86,15 @@ esac # multiprobe errors if grep -q "Create/append/" README && grep -q "imm-value" README; then -echo 'p:kprobes/testevent kernel_clone' > kprobe_events +echo "p:kprobes/testevent $FUNCTION_FORK" > kprobe_events check_error '^r:kprobes/testevent do_exit' # DIFF_PROBE_TYPE # Explicitly use printf "%s" to not interpret \1 -printf "%s" 'p:kprobes/testevent kernel_clone abcd=\1' > kprobe_events -check_error 'p:kprobes/testevent kernel_clone ^bcd=\1' # DIFF_ARG_TYPE -check_error 'p:kprobes/testevent kernel_clone ^abcd=\1:u8' # DIFF_ARG_TYPE -check_error 'p:kprobes/testevent kernel_clone ^abcd=\"foo"' # DIFF_ARG_TYPE -check_error '^p:kprobes/testevent kernel_clone abcd=\1' # SAME_PROBE +printf "%s" "p:kprobes/testevent $FUNCTION_FORK abcd=\\1" > kprobe_events +check_error "p:kprobes/testevent $FUNCTION_FORK ^bcd=\\1" # DIFF_ARG_TYPE +check_error "p:kprobes/testevent $FUNCTION_FORK ^abcd=\\1:u8" # DIFF_ARG_TYPE +check_error "p:kprobes/testevent $FUNCTION_FORK ^abcd=\\\"foo\"" # DIFF_ARG_TYPE +check_error "^p:kprobes/testevent $FUNCTION_FORK abcd=\\1" # SAME_PROBE fi # %return suffix errors diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc index 7ae492c204a4..197cc2afd404 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc @@ -4,14 +4,14 @@ # requires: kprobe_events # Add new kretprobe event -echo 'r:testprobe2 kernel_clone $retval' > kprobe_events +echo "r:testprobe2 $FUNCTION_FORK \$retval" > kprobe_events grep testprobe2 kprobe_events | grep -q 'arg1=\$retval' test -d events/kprobes/testprobe2 echo 1 > events/kprobes/testprobe2/enable ( echo "forked") -cat trace | grep testprobe2 | grep -q '<- kernel_clone' +cat trace | grep testprobe2 | grep -q "<- $FUNCTION_FORK" echo 0 > events/kprobes/testprobe2/enable echo '-:testprobe2' >> kprobe_events diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc b/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc index c4093fc1a773..98166fa3eb91 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc @@ -4,7 +4,7 @@ # requires: kprobe_events ! grep -q 'myevent' kprobe_profile -echo p:myevent kernel_clone > kprobe_events +echo "p:myevent $FUNCTION_FORK" > kprobe_events grep -q 'myevent[[:space:]]*0[[:space:]]*0$' kprobe_profile echo 1 > events/kprobes/myevent/enable ( echo "forked" ) diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index f19804df244c..edce85420d19 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -126,7 +126,7 @@ snprintf(_metadata->results->reason, \ sizeof(_metadata->results->reason), fmt, ##__VA_ARGS__); \ if (TH_LOG_ENABLED) { \ - fprintf(TH_LOG_STREAM, "# SKIP %s\n", \ + fprintf(TH_LOG_STREAM, "# SKIP %s\n", \ _metadata->results->reason); \ } \ _metadata->passed = 1; \ @@ -432,7 +432,7 @@ */ /** - * ASSERT_EQ(expected, seen) + * ASSERT_EQ() * * @expected: expected value * @seen: measured value @@ -443,7 +443,7 @@ __EXPECT(expected, #expected, seen, #seen, ==, 1) /** - * ASSERT_NE(expected, seen) + * ASSERT_NE() * * @expected: expected value * @seen: measured value @@ -454,7 +454,7 @@ __EXPECT(expected, #expected, seen, #seen, !=, 1) /** - * ASSERT_LT(expected, seen) + * ASSERT_LT() * * @expected: expected value * @seen: measured value @@ -465,7 +465,7 @@ __EXPECT(expected, #expected, seen, #seen, <, 1) /** - * ASSERT_LE(expected, seen) + * ASSERT_LE() * * @expected: expected value * @seen: measured value @@ -476,7 +476,7 @@ __EXPECT(expected, #expected, seen, #seen, <=, 1) /** - * ASSERT_GT(expected, seen) + * ASSERT_GT() * * @expected: expected value * @seen: measured value @@ -487,7 +487,7 @@ __EXPECT(expected, #expected, seen, #seen, >, 1) /** - * ASSERT_GE(expected, seen) + * ASSERT_GE() * * @expected: expected value * @seen: measured value @@ -498,7 +498,7 @@ __EXPECT(expected, #expected, seen, #seen, >=, 1) /** - * ASSERT_NULL(seen) + * ASSERT_NULL() * * @seen: measured value * @@ -508,7 +508,7 @@ __EXPECT(NULL, "NULL", seen, #seen, ==, 1) /** - * ASSERT_TRUE(seen) + * ASSERT_TRUE() * * @seen: measured value * @@ -518,7 +518,7 @@ __EXPECT(0, "0", seen, #seen, !=, 1) /** - * ASSERT_FALSE(seen) + * ASSERT_FALSE() * * @seen: measured value * @@ -528,7 +528,7 @@ __EXPECT(0, "0", seen, #seen, ==, 1) /** - * ASSERT_STREQ(expected, seen) + * ASSERT_STREQ() * * @expected: expected value * @seen: measured value @@ -539,7 +539,7 @@ __EXPECT_STR(expected, seen, ==, 1) /** - * ASSERT_STRNE(expected, seen) + * ASSERT_STRNE() * * @expected: expected value * @seen: measured value @@ -550,7 +550,7 @@ __EXPECT_STR(expected, seen, !=, 1) /** - * EXPECT_EQ(expected, seen) + * EXPECT_EQ() * * @expected: expected value * @seen: measured value @@ -561,7 +561,7 @@ __EXPECT(expected, #expected, seen, #seen, ==, 0) /** - * EXPECT_NE(expected, seen) + * EXPECT_NE() * * @expected: expected value * @seen: measured value @@ -572,7 +572,7 @@ __EXPECT(expected, #expected, seen, #seen, !=, 0) /** - * EXPECT_LT(expected, seen) + * EXPECT_LT() * * @expected: expected value * @seen: measured value @@ -583,7 +583,7 @@ __EXPECT(expected, #expected, seen, #seen, <, 0) /** - * EXPECT_LE(expected, seen) + * EXPECT_LE() * * @expected: expected value * @seen: measured value @@ -594,7 +594,7 @@ __EXPECT(expected, #expected, seen, #seen, <=, 0) /** - * EXPECT_GT(expected, seen) + * EXPECT_GT() * * @expected: expected value * @seen: measured value @@ -605,7 +605,7 @@ __EXPECT(expected, #expected, seen, #seen, >, 0) /** - * EXPECT_GE(expected, seen) + * EXPECT_GE() * * @expected: expected value * @seen: measured value @@ -616,7 +616,7 @@ __EXPECT(expected, #expected, seen, #seen, >=, 0) /** - * EXPECT_NULL(seen) + * EXPECT_NULL() * * @seen: measured value * @@ -626,7 +626,7 @@ __EXPECT(NULL, "NULL", seen, #seen, ==, 0) /** - * EXPECT_TRUE(seen) + * EXPECT_TRUE() * * @seen: measured value * @@ -636,7 +636,7 @@ __EXPECT(0, "0", seen, #seen, !=, 0) /** - * EXPECT_FALSE(seen) + * EXPECT_FALSE() * * @seen: measured value * @@ -646,7 +646,7 @@ __EXPECT(0, "0", seen, #seen, ==, 0) /** - * EXPECT_STREQ(expected, seen) + * EXPECT_STREQ() * * @expected: expected value * @seen: measured value @@ -657,7 +657,7 @@ __EXPECT_STR(expected, seen, ==, 0) /** - * EXPECT_STRNE(expected, seen) + * EXPECT_STRNE() * * @expected: expected value * @seen: measured value diff --git a/tools/testing/selftests/kvm/.gitignore b/tools/testing/selftests/kvm/.gitignore index 307ceaadbbb9..d2c2d6205008 100644 --- a/tools/testing/selftests/kvm/.gitignore +++ b/tools/testing/selftests/kvm/.gitignore @@ -15,6 +15,7 @@ /x86_64/vmx_preemption_timer_test /x86_64/svm_vmcall_test /x86_64/sync_regs_test +/x86_64/vmx_apic_access_test /x86_64/vmx_close_while_nested_test /x86_64/vmx_dirty_log_test /x86_64/vmx_set_nested_state_test diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index 7ebe71fbca53..30afbad36cd5 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -49,6 +49,7 @@ TEST_GEN_PROGS_x86_64 += x86_64/state_test TEST_GEN_PROGS_x86_64 += x86_64/vmx_preemption_timer_test TEST_GEN_PROGS_x86_64 += x86_64/svm_vmcall_test TEST_GEN_PROGS_x86_64 += x86_64/sync_regs_test +TEST_GEN_PROGS_x86_64 += x86_64/vmx_apic_access_test TEST_GEN_PROGS_x86_64 += x86_64/vmx_close_while_nested_test TEST_GEN_PROGS_x86_64 += x86_64/vmx_dirty_log_test TEST_GEN_PROGS_x86_64 += x86_64/vmx_set_nested_state_test diff --git a/tools/testing/selftests/kvm/include/x86_64/vmx.h b/tools/testing/selftests/kvm/include/x86_64/vmx.h index 54d624dd6c10..e78d7e26ba61 100644 --- a/tools/testing/selftests/kvm/include/x86_64/vmx.h +++ b/tools/testing/selftests/kvm/include/x86_64/vmx.h @@ -573,6 +573,10 @@ struct vmx_pages { void *eptp_hva; uint64_t eptp_gpa; void *eptp; + + void *apic_access_hva; + uint64_t apic_access_gpa; + void *apic_access; }; union vmx_basic { @@ -615,5 +619,7 @@ void nested_map_memslot(struct vmx_pages *vmx, struct kvm_vm *vm, uint32_t memslot, uint32_t eptp_memslot); void prepare_eptp(struct vmx_pages *vmx, struct kvm_vm *vm, uint32_t eptp_memslot); +void prepare_virtualize_apic_accesses(struct vmx_pages *vmx, struct kvm_vm *vm, + uint32_t eptp_memslot); #endif /* SELFTEST_KVM_VMX_H */ diff --git a/tools/testing/selftests/kvm/lib/kvm_util.c b/tools/testing/selftests/kvm/lib/kvm_util.c index 74776ee228f2..3327cebc1095 100644 --- a/tools/testing/selftests/kvm/lib/kvm_util.c +++ b/tools/testing/selftests/kvm/lib/kvm_util.c @@ -14,6 +14,7 @@ #include <sys/mman.h> #include <sys/types.h> #include <sys/stat.h> +#include <unistd.h> #include <linux/kernel.h> #define KVM_UTIL_PGS_PER_HUGEPG 512 @@ -664,13 +665,21 @@ void vm_userspace_mem_region_add(struct kvm_vm *vm, /* As needed perform madvise */ if (src_type == VM_MEM_SRC_ANONYMOUS || src_type == VM_MEM_SRC_ANONYMOUS_THP) { - ret = madvise(region->host_mem, npages * vm->page_size, - src_type == VM_MEM_SRC_ANONYMOUS ? MADV_NOHUGEPAGE : MADV_HUGEPAGE); - TEST_ASSERT(ret == 0, "madvise failed,\n" - " addr: %p\n" - " length: 0x%lx\n" - " src_type: %x", - region->host_mem, npages * vm->page_size, src_type); + struct stat statbuf; + + ret = stat("/sys/kernel/mm/transparent_hugepage", &statbuf); + TEST_ASSERT(ret == 0 || (ret == -1 && errno == ENOENT), + "stat /sys/kernel/mm/transparent_hugepage"); + + TEST_ASSERT(ret == 0 || src_type != VM_MEM_SRC_ANONYMOUS_THP, + "VM_MEM_SRC_ANONYMOUS_THP requires THP to be configured in the host kernel"); + + if (ret == 0) { + ret = madvise(region->host_mem, npages * vm->page_size, + src_type == VM_MEM_SRC_ANONYMOUS ? MADV_NOHUGEPAGE : MADV_HUGEPAGE); + TEST_ASSERT(ret == 0, "madvise failed, addr: %p length: 0x%lx src_type: %x", + region->host_mem, npages * vm->page_size, src_type); + } } region->unused_phy_pages = sparsebit_alloc(); diff --git a/tools/testing/selftests/kvm/lib/x86_64/vmx.c b/tools/testing/selftests/kvm/lib/x86_64/vmx.c index f1e00d43eea2..2448b30e8efa 100644 --- a/tools/testing/selftests/kvm/lib/x86_64/vmx.c +++ b/tools/testing/selftests/kvm/lib/x86_64/vmx.c @@ -542,3 +542,12 @@ void prepare_eptp(struct vmx_pages *vmx, struct kvm_vm *vm, vmx->eptp_hva = addr_gva2hva(vm, (uintptr_t)vmx->eptp); vmx->eptp_gpa = addr_gva2gpa(vm, (uintptr_t)vmx->eptp); } + +void prepare_virtualize_apic_accesses(struct vmx_pages *vmx, struct kvm_vm *vm, + uint32_t eptp_memslot) +{ + vmx->apic_access = (void *)vm_vaddr_alloc(vm, getpagesize(), + 0x10000, 0, 0); + vmx->apic_access_hva = addr_gva2hva(vm, (uintptr_t)vmx->apic_access); + vmx->apic_access_gpa = addr_gva2gpa(vm, (uintptr_t)vmx->apic_access); +} diff --git a/tools/testing/selftests/kvm/x86_64/vmx_apic_access_test.c b/tools/testing/selftests/kvm/x86_64/vmx_apic_access_test.c new file mode 100644 index 000000000000..1f65342d6cb7 --- /dev/null +++ b/tools/testing/selftests/kvm/x86_64/vmx_apic_access_test.c @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * vmx_apic_access_test + * + * Copyright (C) 2020, Google LLC. + * + * This work is licensed under the terms of the GNU GPL, version 2. + * + * The first subtest simply checks to see that an L2 guest can be + * launched with a valid APIC-access address that is backed by a + * page of L1 physical memory. + * + * The second subtest sets the APIC-access address to a (valid) L1 + * physical address that is not backed by memory. KVM can't handle + * this situation, so resuming L2 should result in a KVM exit for + * internal error (emulation). This is not an architectural + * requirement. It is just a shortcoming of KVM. The internal error + * is unfortunate, but it's better than what used to happen! + */ + +#include "test_util.h" +#include "kvm_util.h" +#include "processor.h" +#include "vmx.h" + +#include <string.h> +#include <sys/ioctl.h> + +#include "kselftest.h" + +#define VCPU_ID 0 + +/* The virtual machine object. */ +static struct kvm_vm *vm; + +static void l2_guest_code(void) +{ + /* Exit to L1 */ + __asm__ __volatile__("vmcall"); +} + +static void l1_guest_code(struct vmx_pages *vmx_pages, unsigned long high_gpa) +{ +#define L2_GUEST_STACK_SIZE 64 + unsigned long l2_guest_stack[L2_GUEST_STACK_SIZE]; + uint32_t control; + + GUEST_ASSERT(prepare_for_vmx_operation(vmx_pages)); + GUEST_ASSERT(load_vmcs(vmx_pages)); + + /* Prepare the VMCS for L2 execution. */ + prepare_vmcs(vmx_pages, l2_guest_code, + &l2_guest_stack[L2_GUEST_STACK_SIZE]); + control = vmreadz(CPU_BASED_VM_EXEC_CONTROL); + control |= CPU_BASED_ACTIVATE_SECONDARY_CONTROLS; + vmwrite(CPU_BASED_VM_EXEC_CONTROL, control); + control = vmreadz(SECONDARY_VM_EXEC_CONTROL); + control |= SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES; + vmwrite(SECONDARY_VM_EXEC_CONTROL, control); + vmwrite(APIC_ACCESS_ADDR, vmx_pages->apic_access_gpa); + + /* Try to launch L2 with the memory-backed APIC-access address. */ + GUEST_SYNC(vmreadz(APIC_ACCESS_ADDR)); + GUEST_ASSERT(!vmlaunch()); + GUEST_ASSERT(vmreadz(VM_EXIT_REASON) == EXIT_REASON_VMCALL); + + vmwrite(APIC_ACCESS_ADDR, high_gpa); + + /* Try to resume L2 with the unbacked APIC-access address. */ + GUEST_SYNC(vmreadz(APIC_ACCESS_ADDR)); + GUEST_ASSERT(!vmresume()); + GUEST_ASSERT(vmreadz(VM_EXIT_REASON) == EXIT_REASON_VMCALL); + + GUEST_DONE(); +} + +int main(int argc, char *argv[]) +{ + unsigned long apic_access_addr = ~0ul; + unsigned int paddr_width; + unsigned int vaddr_width; + vm_vaddr_t vmx_pages_gva; + unsigned long high_gpa; + struct vmx_pages *vmx; + bool done = false; + + nested_vmx_check_supported(); + + vm = vm_create_default(VCPU_ID, 0, (void *) l1_guest_code); + vcpu_set_cpuid(vm, VCPU_ID, kvm_get_supported_cpuid()); + + kvm_get_cpu_address_width(&paddr_width, &vaddr_width); + high_gpa = (1ul << paddr_width) - getpagesize(); + if ((unsigned long)DEFAULT_GUEST_PHY_PAGES * getpagesize() > high_gpa) { + print_skip("No unbacked physical page available"); + exit(KSFT_SKIP); + } + + vmx = vcpu_alloc_vmx(vm, &vmx_pages_gva); + prepare_virtualize_apic_accesses(vmx, vm, 0); + vcpu_args_set(vm, VCPU_ID, 2, vmx_pages_gva, high_gpa); + + while (!done) { + volatile struct kvm_run *run = vcpu_state(vm, VCPU_ID); + struct ucall uc; + + vcpu_run(vm, VCPU_ID); + if (apic_access_addr == high_gpa) { + TEST_ASSERT(run->exit_reason == + KVM_EXIT_INTERNAL_ERROR, + "Got exit reason other than KVM_EXIT_INTERNAL_ERROR: %u (%s)\n", + run->exit_reason, + exit_reason_str(run->exit_reason)); + TEST_ASSERT(run->internal.suberror == + KVM_INTERNAL_ERROR_EMULATION, + "Got internal suberror other than KVM_INTERNAL_ERROR_EMULATION: %u\n", + run->internal.suberror); + break; + } + TEST_ASSERT(run->exit_reason == KVM_EXIT_IO, + "Got exit_reason other than KVM_EXIT_IO: %u (%s)\n", + run->exit_reason, + exit_reason_str(run->exit_reason)); + + switch (get_ucall(vm, VCPU_ID, &uc)) { + case UCALL_ABORT: + TEST_FAIL("%s at %s:%ld", (const char *)uc.args[0], + __FILE__, uc.args[1]); + /* NOT REACHED */ + case UCALL_SYNC: + apic_access_addr = uc.args[1]; + break; + case UCALL_DONE: + done = true; + break; + default: + TEST_ASSERT(false, "Unknown ucall %lu", uc.cmd); + } + } + kvm_vm_free(vm); + return 0; +} diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index 30848ca36555..a5ce26d548e4 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -136,7 +136,7 @@ endif ifeq ($(OVERRIDE_TARGETS),) LOCAL_HDRS := $(selfdir)/kselftest_harness.h $(selfdir)/kselftest.h $(OUTPUT)/%:%.c $(LOCAL_HDRS) - $(LINK.c) $^ $(LDLIBS) -o $@ + $(LINK.c) $(filter-out $(LOCAL_HDRS),$^) $(LDLIBS) -o $@ $(OUTPUT)/%.o:%.S $(COMPILE.S) $^ -o $@ diff --git a/tools/testing/selftests/pidfd/config b/tools/testing/selftests/pidfd/config index bb11de90c0c9..f6f2965e17af 100644 --- a/tools/testing/selftests/pidfd/config +++ b/tools/testing/selftests/pidfd/config @@ -4,3 +4,4 @@ CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_CGROUPS=y +CONFIG_CHECKPOINT_RESTORE=y diff --git a/tools/testing/selftests/pidfd/pidfd_getfd_test.c b/tools/testing/selftests/pidfd/pidfd_getfd_test.c index 7758c98be015..0930e2411dfb 100644 --- a/tools/testing/selftests/pidfd/pidfd_getfd_test.c +++ b/tools/testing/selftests/pidfd/pidfd_getfd_test.c @@ -204,7 +204,10 @@ TEST_F(child, fetch_fd) fd = sys_pidfd_getfd(self->pidfd, self->remote_fd, 0); ASSERT_GE(fd, 0); - EXPECT_EQ(0, sys_kcmp(getpid(), self->pid, KCMP_FILE, fd, self->remote_fd)); + ret = sys_kcmp(getpid(), self->pid, KCMP_FILE, fd, self->remote_fd); + if (ret < 0 && errno == ENOSYS) + SKIP(return, "kcmp() syscall not supported"); + EXPECT_EQ(ret, 0); ret = fcntl(fd, F_GETFD); ASSERT_GE(ret, 0); diff --git a/tools/testing/selftests/pidfd/pidfd_open_test.c b/tools/testing/selftests/pidfd/pidfd_open_test.c index b9fe75fc3e51..8a59438ccc78 100644 --- a/tools/testing/selftests/pidfd/pidfd_open_test.c +++ b/tools/testing/selftests/pidfd/pidfd_open_test.c @@ -6,7 +6,6 @@ #include <inttypes.h> #include <limits.h> #include <linux/types.h> -#include <linux/wait.h> #include <sched.h> #include <signal.h> #include <stdbool.h> diff --git a/tools/testing/selftests/pidfd/pidfd_poll_test.c b/tools/testing/selftests/pidfd/pidfd_poll_test.c index 4b115444dfe9..610811275357 100644 --- a/tools/testing/selftests/pidfd/pidfd_poll_test.c +++ b/tools/testing/selftests/pidfd/pidfd_poll_test.c @@ -3,7 +3,6 @@ #define _GNU_SOURCE #include <errno.h> #include <linux/types.h> -#include <linux/wait.h> #include <poll.h> #include <signal.h> #include <stdbool.h> diff --git a/tools/testing/selftests/pidfd/pidfd_setns_test.c b/tools/testing/selftests/pidfd/pidfd_setns_test.c index 1f085b922c6e..6e2f2cd400ca 100644 --- a/tools/testing/selftests/pidfd/pidfd_setns_test.c +++ b/tools/testing/selftests/pidfd/pidfd_setns_test.c @@ -16,7 +16,6 @@ #include <unistd.h> #include <sys/socket.h> #include <sys/stat.h> -#include <linux/kcmp.h> #include "pidfd.h" #include "../clone3/clone3_selftests.h" diff --git a/tools/testing/selftests/pidfd/pidfd_test.c b/tools/testing/selftests/pidfd/pidfd_test.c index c585aaa2acd8..529eb700ac26 100644 --- a/tools/testing/selftests/pidfd/pidfd_test.c +++ b/tools/testing/selftests/pidfd/pidfd_test.c @@ -330,7 +330,7 @@ static int test_pidfd_send_signal_recycled_pid_fail(void) ksft_exit_fail_msg("%s test: Failed to recycle pid %d\n", test_name, PID_RECYCLE); case PIDFD_SKIP: - ksft_print_msg("%s test: Skipping test\n", test_name); + ksft_test_result_skip("%s test: Skipping test\n", test_name); ret = 0; break; case PIDFD_XFAIL: diff --git a/tools/testing/selftests/proc/proc-loadavg-001.c b/tools/testing/selftests/proc/proc-loadavg-001.c index 471e2aa28077..fb4fe9188806 100644 --- a/tools/testing/selftests/proc/proc-loadavg-001.c +++ b/tools/testing/selftests/proc/proc-loadavg-001.c @@ -14,7 +14,6 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ /* Test that /proc/loadavg correctly reports last pid in pid namespace. */ -#define _GNU_SOURCE #include <errno.h> #include <sched.h> #include <sys/types.h> diff --git a/tools/testing/selftests/proc/proc-self-syscall.c b/tools/testing/selftests/proc/proc-self-syscall.c index 9f6d000c0245..8511dcfe67c7 100644 --- a/tools/testing/selftests/proc/proc-self-syscall.c +++ b/tools/testing/selftests/proc/proc-self-syscall.c @@ -13,7 +13,6 @@ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -#define _GNU_SOURCE #include <unistd.h> #include <sys/syscall.h> #include <sys/types.h> diff --git a/tools/testing/selftests/proc/proc-uptime-002.c b/tools/testing/selftests/proc/proc-uptime-002.c index 30e2b7849089..e7ceabed7f51 100644 --- a/tools/testing/selftests/proc/proc-uptime-002.c +++ b/tools/testing/selftests/proc/proc-uptime-002.c @@ -15,7 +15,6 @@ */ // Test that values in /proc/uptime increment monotonically // while shifting across CPUs. -#define _GNU_SOURCE #undef NDEBUG #include <assert.h> #include <unistd.h> diff --git a/tools/testing/selftests/wireguard/netns.sh b/tools/testing/selftests/wireguard/netns.sh index d77f4829f1e0..74c69b75f6f5 100755 --- a/tools/testing/selftests/wireguard/netns.sh +++ b/tools/testing/selftests/wireguard/netns.sh @@ -316,6 +316,14 @@ pp sleep 3 n2 ping -W 1 -c 1 192.168.241.1 n1 wg set wg0 peer "$pub2" persistent-keepalive 0 +# Test that sk_bound_dev_if works +n1 ping -I wg0 -c 1 -W 1 192.168.241.2 +# What about when the mark changes and the packet must be rerouted? +n1 iptables -t mangle -I OUTPUT -j MARK --set-xmark 1 +n1 ping -c 1 -W 1 192.168.241.2 # First the boring case +n1 ping -I wg0 -c 1 -W 1 192.168.241.2 # Then the sk_bound_dev_if case +n1 iptables -t mangle -D OUTPUT -j MARK --set-xmark 1 + # Test that onion routing works, even when it loops n1 wg set wg0 peer "$pub3" allowed-ips 192.168.242.2/32 endpoint 192.168.241.2:5 ip1 addr add 192.168.242.1/24 dev wg0 diff --git a/tools/testing/selftests/wireguard/qemu/kernel.config b/tools/testing/selftests/wireguard/qemu/kernel.config index d531de13c95b..4eecb432a66c 100644 --- a/tools/testing/selftests/wireguard/qemu/kernel.config +++ b/tools/testing/selftests/wireguard/qemu/kernel.config @@ -18,10 +18,12 @@ CONFIG_NF_NAT=y CONFIG_NETFILTER_XTABLES=y CONFIG_NETFILTER_XT_NAT=y CONFIG_NETFILTER_XT_MATCH_LENGTH=y +CONFIG_NETFILTER_XT_MARK=y CONFIG_NF_CONNTRACK_IPV4=y CONFIG_NF_NAT_IPV4=y CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_MANGLE=y CONFIG_IP_NF_NAT=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_IP_MULTIPLE_TABLES=y |