diff options
| -rw-r--r-- | arch/arm/boot/dts/qcom-apq8074-dragonboard.dts | 20 | ||||
| -rw-r--r-- | arch/arm/boot/dts/qcom-msm8974.dtsi | 50 | ||||
| -rw-r--r-- | arch/arm/boot/dts/qcom-pm8941.dtsi | 32 |
3 files changed, 101 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index ad51df27dfb7..32f3b81f609c 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -44,6 +44,26 @@ vqmmc-supply = <&pm8941_l13>; }; + usb@f9a55000 { + status = "ok"; + phys = <&usb_hs2_phy>; + phy-select = <&tcsr 0xb000 1>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + hnp-disable; + srp-disable; + adp-disable; + ulpi { + phy@b { + status = "ok"; + v3p3-supply = <&pm8941_l24>; + v1p8-supply = <&pm8941_l6>; + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x63>; + }; + }; + }; + pinctrl@fd510000 { i2c11_pins: i2c11 { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 0b2014fab4ea..c5ee68a3f7f5 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/reset/qcom,gcc-msm8974.h> #include <dt-bindings/gpio/gpio.h> #include "skeleton.dtsi" @@ -551,6 +552,11 @@ reg = <0xfc400000 0x4000>; }; + tcsr: syscon@fd4a0000 { + compatible = "syscon"; + reg = <0xfd4a0000 0x10000>; + }; + tcsr_mutex_block: syscon@fd484000 { compatible = "syscon"; reg = <0xfd484000 0x2000>; @@ -620,6 +626,50 @@ status = "disabled"; }; + otg: usb@f9a55000 { + compatible = "qcom,ci-hdrc"; + reg = <0xf9a55000 0x200>, + <0xf9a55200 0x200>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <75000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + phy_type = "ulpi"; + dr_mode = "otg"; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs1_phy: phy@a { + compatible = "qcom,usb-hs-phy-msm8974", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>; + reset-names = "phy", "por"; + status = "disabled"; + }; + + usb_hs2_phy: phy@b { + compatible = "qcom,usb-hs-phy-msm8974", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>; + reset-names = "phy", "por"; + status = "disabled"; + }; + }; + }; + rng@f9bff000 { compatible = "qcom,prng"; reg = <0xf9bff000 0x200>; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index 6b16b296f0fa..3fc9f34f45bb 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -26,7 +26,14 @@ bias-pull-up; }; - charger@1000 { + usb_id: misc@900 { + compatible = "qcom,pm8941-misc"; + reg = <0x900>; + interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_id"; + }; + + smbb: charger@1000 { compatible = "qcom,pm8941-charger"; reg = <0x1000>; interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, @@ -175,5 +182,28 @@ status = "disabled"; }; + + regulators { + compatible = "qcom,pm8941-regulators"; + interrupts = <0x1 0x83 0x2 0>, <0x1 0x84 0x2 0>; + interrupt-names = "ocp-5vs1", "ocp-5vs2"; + vin_5vs-supply = <&pm8941_5v>; + + pm8941_5v: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-enable-ramp-delay = <500>; + }; + + pm8941_5vs1: 5vs1 { + regulator-enable-ramp-delay = <1000>; + regulator-pull-down; + regulator-over-current-protection; + qcom,ocp-max-retries = <10>; + qcom,ocp-retry-delay = <30>; + qcom,vs-soft-start-strength = <0>; + regulator-initial-mode = <1>; + }; + }; }; }; |