diff options
| -rw-r--r-- | drivers/mtd/ubi/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/mtd/ubi/io.c | 2 | ||||
| -rw-r--r-- | drivers/mtd/ubi/kapi.c | 6 | ||||
| -rw-r--r-- | drivers/mtd/ubi/scan.c | 4 | ||||
| -rw-r--r-- | drivers/mtd/ubi/wl.c | 2 |
5 files changed, 8 insertions, 8 deletions
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig index 0a8c7ea764ae..f702a163d8df 100644 --- a/drivers/mtd/ubi/Kconfig +++ b/drivers/mtd/ubi/Kconfig @@ -27,7 +27,7 @@ config MTD_UBI_WL_THRESHOLD The default value should be OK for SLC NAND flashes, NOR flashes and other flashes which have eraseblock life-cycle 100000 or more. However, in case of MLC NAND flashes which typically have eraseblock - life-cycle less then 10000, the threshold should be lessened (e.g., + life-cycle less than 10000, the threshold should be lessened (e.g., to 128 or 256, although it does not have to be power of 2). config MTD_UBI_BEB_RESERVE diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c index 533b1a4b9af1..016ec1387bc2 100644 --- a/drivers/mtd/ubi/io.c +++ b/drivers/mtd/ubi/io.c @@ -65,7 +65,7 @@ * * A: because when writing a sub-page, MTD still writes a full 2K page but the * bytes which are no relevant to the sub-page are 0xFF. So, basically, writing - * 4x512 sub-pages is 4 times slower then writing one 2KiB NAND page. Thus, we + * 4x512 sub-pages is 4 times slower than writing one 2KiB NAND page. Thus, we * prefer to use sub-pages only for EV and VID headers. * * As it was noted above, the VID header may start at a non-aligned offset. diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c index 17f287decc36..69fa4ef03c53 100644 --- a/drivers/mtd/ubi/kapi.c +++ b/drivers/mtd/ubi/kapi.c @@ -488,7 +488,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_write); * * This function changes the contents of a logical eraseblock atomically. @buf * has to contain new logical eraseblock data, and @len - the length of the - * data, which has to be aligned. The length may be shorter then the logical + * data, which has to be aligned. The length may be shorter than the logical * eraseblock size, ant the logical eraseblock may be appended to more times * later on. This function guarantees that in case of an unclean reboot the old * contents is preserved. Returns zero in case of success and a negative error @@ -571,7 +571,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_erase); * * This function un-maps logical eraseblock @lnum and schedules the * corresponding physical eraseblock for erasure, so that it will eventually be - * physically erased in background. This operation is much faster then the + * physically erased in background. This operation is much faster than the * erase operation. * * Unlike erase, the un-map operation does not guarantee that the logical @@ -590,7 +590,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_erase); * * The main and obvious use-case of this function is when the contents of a * logical eraseblock has to be re-written. Then it is much more efficient to - * first un-map it, then write new data, rather then first erase it, then write + * first un-map it, then write new data, rather than first erase it, then write * new data. Note, once new data has been written to the logical eraseblock, * UBI guarantees that the old contents has gone forever. In other words, if an * unclean reboot happens after the logical eraseblock has been un-mapped and diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index dc5f688699da..aed19f33b8f3 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -231,7 +231,7 @@ static struct ubi_scan_volume *add_volume(struct ubi_scan_info *si, int vol_id, * case of success this function returns a positive value, in case of failure, a * negative error code is returned. The success return codes use the following * bits: - * o bit 0 is cleared: the first PEB (described by @seb) is newer then the + * o bit 0 is cleared: the first PEB (described by @seb) is newer than the * second PEB (described by @pnum and @vid_hdr); * o bit 0 is set: the second PEB is newer; * o bit 1 is cleared: no bit-flips were detected in the newer LEB; @@ -452,7 +452,7 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si, if (cmp_res & 1) { /* - * This logical eraseblock is newer then the one + * This logical eraseblock is newer than the one * found earlier. */ err = validate_vid_hdr(vid_hdr, sv, pnum); diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index f64ddabd4ac8..ee7b1d8fbb92 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -350,7 +350,7 @@ static void prot_queue_add(struct ubi_device *ubi, struct ubi_wl_entry *e) * @max: highest possible erase counter * * This function looks for a wear leveling entry with erase counter closest to - * @max and less then @max. + * @max and less than @max. */ static struct ubi_wl_entry *find_wl_entry(struct rb_root *root, int max) { |