diff options
| -rw-r--r-- | Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt | 154 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml | 261 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mach-mx27_3ds.c | 21 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mach-mx31_3ds.c | 24 | ||||
| -rw-r--r-- | drivers/video/backlight/backlight.c | 21 | ||||
| -rw-r--r-- | drivers/video/backlight/l4f00242t03.c | 45 | ||||
| -rw-r--r-- | drivers/video/backlight/lp855x_bl.c | 20 | ||||
| -rw-r--r-- | drivers/video/backlight/qcom-wled.c | 589 | ||||
| -rw-r--r-- | include/linux/backlight.h | 1 | ||||
| -rw-r--r-- | include/linux/spi/l4f00242t03.h | 17 |
10 files changed, 867 insertions, 286 deletions
diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt deleted file mode 100644 index c06863badfbd..000000000000 --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt +++ /dev/null @@ -1,154 +0,0 @@ -Binding for Qualcomm Technologies, Inc. WLED driver - -WLED (White Light Emitting Diode) driver is used for controlling display -backlight that is part of PMIC on Qualcomm Technologies, Inc. reference -platforms. The PMIC is connected to the host processor via SPMI bus. - -- compatible - Usage: required - Value type: <string> - Definition: should be one of: - "qcom,pm8941-wled" - "qcom,pmi8998-wled" - "qcom,pm660l-wled" - -- reg - Usage: required - Value type: <prop encoded array> - Definition: Base address of the WLED modules. - -- default-brightness - Usage: optional - Value type: <u32> - Definition: brightness value on boot, value from: 0-4095. - Default: 2048 - -- label - Usage: required - Value type: <string> - Definition: The name of the backlight device - -- qcom,cs-out - Usage: optional - Value type: <bool> - Definition: enable current sink output. - This property is supported only for PM8941. - -- qcom,cabc - Usage: optional - Value type: <bool> - Definition: enable content adaptive backlight control. - -- qcom,ext-gen - Usage: optional - Value type: <bool> - Definition: use externally generated modulator signal to dim. - This property is supported only for PM8941. - -- qcom,current-limit - Usage: optional - Value type: <u32> - Definition: mA; per-string current limit; value from 0 to 25 with - 1 mA step. Default 20 mA. - This property is supported only for pm8941. - -- qcom,current-limit-microamp - Usage: optional - Value type: <u32> - Definition: uA; per-string current limit; value from 0 to 30000 with - 2500 uA step. Default 25 mA. - -- qcom,current-boost-limit - Usage: optional - Value type: <u32> - Definition: mA; boost current limit. - For pm8941: one of: 105, 385, 525, 805, 980, 1260, 1400, - 1680. Default: 805 mA. - For pmi8998: one of: 105, 280, 450, 620, 970, 1150, 1300, - 1500. Default: 970 mA. - -- qcom,switching-freq - Usage: optional - Value type: <u32> - Definition: kHz; switching frequency; one of: 600, 640, 685, 738, - 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, - 4800, 9600. - Default: for pm8941: 1600 kHz - for pmi8998: 800 kHz - -- qcom,ovp - Usage: optional - Value type: <u32> - Definition: V; Over-voltage protection limit; one of: - 27, 29, 32, 35. Default: 29V - This property is supported only for PM8941. - -- qcom,ovp-millivolt - Usage: optional - Value type: <u32> - Definition: mV; Over-voltage protection limit; - For pmi8998: one of 18100, 19600, 29600, 31100. - Default 29600 mV. - If this property is not specified for PM8941, it - falls back to "qcom,ovp" property. - -- qcom,num-strings - Usage: optional - Value type: <u32> - Definition: #; number of led strings attached; - value: For PM8941 from 1 to 3. Default: 2 - For PMI8998 from 1 to 4. - -- interrupts - Usage: optional - Value type: <prop encoded array> - Definition: Interrupts associated with WLED. This should be - "short" and "ovp" interrupts. Interrupts can be - specified as per the encoding listed under - Documentation/devicetree/bindings/spmi/ - qcom,spmi-pmic-arb.txt. - -- interrupt-names - Usage: optional - Value type: <string> - Definition: Interrupt names associated with the interrupts. - Must be "short" and "ovp". The short circuit detection - is not supported for PM8941. - -- qcom,enabled-strings - Usage: optional - Value tyoe: <u32 array> - Definition: Array of the WLED strings numbered from 0 to 3. Each - string of leds are operated individually. Specify the - list of strings used by the device. Any combination of - led strings can be used. - -- qcom,external-pfet - Usage: optional - Value type: <bool> - Definition: Specify if external PFET control for short circuit - protection is used. This property is supported only - for PMI8998. - -- qcom,auto-string-detection - Usage: optional - Value type: <bool> - Definition: Enables auto-detection of the WLED string configuration. - This feature is not supported for PM8941. - - -Example: - -pm8941-wled@d800 { - compatible = "qcom,pm8941-wled"; - reg = <0xd800>; - label = "backlight"; - - qcom,cs-out; - qcom,current-limit = <20>; - qcom,current-boost-limit = <805>; - qcom,switching-freq = <1600>; - qcom,ovp = <29>; - qcom,num-strings = <2>; - qcom,enabled-strings = <0 1>; -}; diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml new file mode 100644 index 000000000000..01c7d93dc658 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml @@ -0,0 +1,261 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/qcom-wled.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for Qualcomm Technologies, Inc. WLED driver + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Kiran Gunda <kgunda@codeaurora.org> + +description: | + WLED (White Light Emitting Diode) driver is used for controlling display + backlight that is part of PMIC on Qualcomm Technologies, Inc. reference + platforms. The PMIC is connected to the host processor via SPMI bus. + +properties: + compatible: + enum: + - qcom,pm8941-wled + - qcom,pmi8998-wled + - qcom,pm660l-wled + - qcom,pm8150l-wled + + reg: + maxItems: 1 + + default-brightness: + description: | + brightness value on boot. + + label: true + + max-brightness: + description: | + Maximum brightness level. + + qcom,cs-out: + description: | + enable current sink output. + This property is supported only for WLED3. + type: boolean + + qcom,cabc: + description: | + enable content adaptive backlight control. + type: boolean + + qcom,ext-gen: + description: | + use externally generated modulator signal to dim. + This property is supported only for WLED3. + type: boolean + + qcom,current-limit: + description: | + mA; per-string current limit. + This property is supported only for WLED3. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + default: 20 + minimum: 0 + maximum: 25 + + qcom,current-limit-microamp: + description: | + uA; per-string current limit. + default: 25 + minimum: 0 + maximum: 30000 + multipleOf: 25 + + qcom,current-boost-limit: + description: | + mA; boost current limit. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + qcom,switching-freq: + description: | + kHz; switching frequency. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ] + + qcom,ovp: + description: | + V; Over-voltage protection limit. + This property is supported only for WLED3. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 27, 29, 32, 35 ] + - default: 29 + + qcom,ovp-millivolt: + description: | + Over-voltage protection limit. This property is for WLED4 only. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 18100, 19600, 29600, 31100 ] + - default: 29600 + + qcom,num-strings: + description: | + number of led strings attached. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + qcom,enabled-strings: + description: | + Array of the WLED strings numbered from 0 to 3. Each + string of leds are operated individually. Specify the + list of strings used by the device. Any combination of + led strings can be used. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + + qcom,external-pfet: + description: | + Specify if external PFET control for short circuit + protection is used. This property is supported only + for WLED4. + type: boolean + + qcom,auto-string-detection: + description: | + Enables auto-detection of the WLED string configuration. + This feature is not supported for WLED3. + type: boolean + + interrupts: + minItems: 1 + items: + - description: over voltage protection interrupt. + - description: short circuit interrupt. + + interrupt-names: + minItems: 1 + items: + - const: ovp + - const: short + + qcom,modulator-sel: + description: | + Selects the modulator used for brightness modulation. + Allowed values are, + 0 - Modulator A + 1 - Modulator B + This property is applicable only to WLED5 peripheral. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1 ] + - default: 0 + + qcom,cabc-sel: + description: | + Selects the CABC pin signal used for brightness modulation. + Allowed values are, + 0 - CABC disabled + 1 - CABC 1 + 2 - CABC 2 + 3 - External signal (e.g. LPG) is used for dimming + This property is applicable only to WLED5 peripheral. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1, 2, 3 ] + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,pm8941-wled + + then: + properties: + qcom,current-boost-limit: + enum: [ 105, 385, 525, 805, 980, 1260, 1400, 1680 ] + default: 805 + + qcom,switching-freq: + default: 1600 + + qcom,num-strings: + enum: [ 1, 2, 3 ] + + interrupts: + maxItems: 1 + + interrupt-names: + maxItems: 1 + + else: + properties: + qcom,current-boost-limit: + enum: [ 105, 280, 450, 620, 970, 1150, 1300, 1500 ] + default: 970 + + qcom,switching-freq: + default: 800 + + qcom,num-strings: + enum: [ 1, 2, 3, 4 ] + + interrupts: + minItems: 2 + + interrupt-names: + minItems: 2 + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8150l-wled + + then: + properties: + default-brightness: + minimum: 0 + maximum: 32767 + + max-brightness: + minimum: 0 + maximum: 32767 + + else: + properties: + default-brightness: + minimum: 0 + maximum: 4095 + + max-brightness: + minimum: 0 + maximum: 4095 + +required: + - compatible + - reg + - label + +additionalProperties: false + +examples: + - | + backlight@d800 { + compatible = "qcom,pm8941-wled"; + reg = <0xd800 0x100>; + label = "backlight"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; + qcom,enabled-strings = <0 1>; + }; diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 7b8325fb5b41..1da5f07952ac 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -13,6 +13,7 @@ #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/irq.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> @@ -20,8 +21,6 @@ #include <linux/mfd/mc13783.h> #include <linux/spi/spi.h> #include <linux/regulator/machine.h> -#include <linux/spi/l4f00242t03.h> - #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -351,9 +350,19 @@ static const struct imx_fb_platform_data mx27_3ds_fb_data __initconst = { }; /* LCD */ -static struct l4f00242t03_pdata mx27_3ds_lcd_pdata = { - .reset_gpio = LCD_RESET, - .data_enable_gpio = LCD_ENABLE, +static struct gpiod_lookup_table mx27_3ds_lcd_gpiod_table = { + .dev_id = "spi0.0", /* Bus 0 chipselect 0 */ + .table = { + /* + * The i.MX27 has the i.MX21 GPIO controller, the GPIOs + * numbered IMX_GPIO_NR(1, 3) and IMX_GPIO_NR(1, 31) + * are in "bank 1" which is subtracted by one in the macro + * so these are actually bank 0 on "imx21-gpio.0". + */ + GPIO_LOOKUP("imx21-gpio.0", 3, "reset", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("imx21-gpio.0", 31, "enable", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { @@ -370,7 +379,6 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { .max_speed_hz = 5000000, .bus_num = 0, .chip_select = 0, /* SS0 */ - .platform_data = &mx27_3ds_lcd_pdata, }, }; @@ -416,6 +424,7 @@ static void __init mx27pdk_late_init(void) if (!otg_mode_host) imx27_add_fsl_usb2_udc(&otg_device_pdata); + gpiod_add_lookup_table(&mx27_3ds_lcd_gpiod_table); mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT); spi_register_board_info(mx27_3ds_spi_devs, ARRAY_SIZE(mx27_3ds_spi_devs)); diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 716d2ad51103..e81386190479 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -10,10 +10,10 @@ #include <linux/clk.h> #include <linux/irq.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/platform_device.h> #include <linux/mfd/mc13783.h> #include <linux/spi/spi.h> -#include <linux/spi/l4f00242t03.h> #include <linux/regulator/machine.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> @@ -160,9 +160,23 @@ static struct mx3fb_platform_data mx3fb_pdata __initdata = { }; /* LCD */ -static struct l4f00242t03_pdata mx31_3ds_l4f00242t03_pdata = { - .reset_gpio = IOMUX_TO_GPIO(MX31_PIN_LCS1), - .data_enable_gpio = IOMUX_TO_GPIO(MX31_PIN_SER_RS), +static struct gpiod_lookup_table mx31_3ds_lcd_gpiod_table = { + .dev_id = "spi0.2", /* Bus 0 chipselect 2 */ + .table = { + /* + * "reset" has IOMUX_TO_GPIO(IOMUX_PIN(88, 28)). + * The macro only shifts 88 to bits 9..16 and then + * mask it and shift it back. The GPIO number is 88. + * 88 is 2*32+24 + */ + GPIO_LOOKUP("imx31-gpio.2", 24, "reset", GPIO_ACTIVE_HIGH), + /* + * Same reasoning as above for + * IOMUX_TO_GPIO(IOMUX_PIN(89, 27), pin 89 is 2*32+25. + */ + GPIO_LOOKUP("imx31-gpio.2", 25, "enable", GPIO_ACTIVE_HIGH), + { }, + }, }; /* @@ -387,7 +401,6 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = { .max_speed_hz = 5000000, .bus_num = 0, .chip_select = 2, /* SS2 */ - .platform_data = &mx31_3ds_l4f00242t03_pdata, }, }; @@ -566,6 +579,7 @@ static void __init mx31_3ds_init(void) static void __init mx31_3ds_late(void) { + gpiod_add_lookup_table(&mx31_3ds_lcd_gpiod_table); mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(mx31_3ds_spi_devs, ARRAY_SIZE(mx31_3ds_spi_devs)); diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c index cac3e35d7630..92d80aa0c0ef 100644 --- a/drivers/video/backlight/backlight.c +++ b/drivers/video/backlight/backlight.c @@ -433,6 +433,27 @@ struct backlight_device *backlight_device_get_by_type(enum backlight_type type) EXPORT_SYMBOL(backlight_device_get_by_type); /** + * backlight_device_get_by_name - Get backlight device by name + * @name: Device name + * + * This function looks up a backlight device by its name. It obtains a reference + * on the backlight device and it is the caller's responsibility to drop the + * reference by calling backlight_put(). + * + * Returns: + * A pointer to the backlight device if found, otherwise NULL. + */ +struct backlight_device *backlight_device_get_by_name(const char *name) +{ + struct device *dev; + + dev = class_find_device_by_name(backlight_class, name); + + return dev ? to_backlight_device(dev) : NULL; +} +EXPORT_SYMBOL(backlight_device_get_by_name); + +/** * backlight_device_unregister - unregisters a backlight device object. * @bd: the backlight device object to be unregistered and freed. * diff --git a/drivers/video/backlight/l4f00242t03.c b/drivers/video/backlight/l4f00242t03.c index 8554b4aa980c..46f97d1c3d21 100644 --- a/drivers/video/backlight/l4f00242t03.c +++ b/drivers/video/backlight/l4f00242t03.c @@ -14,13 +14,11 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/module.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/lcd.h> #include <linux/slab.h> #include <linux/regulator/consumer.h> - #include <linux/spi/spi.h> -#include <linux/spi/l4f00242t03.h> struct l4f00242t03_priv { struct spi_device *spi; @@ -28,16 +26,18 @@ struct l4f00242t03_priv { int lcd_state; struct regulator *io_reg; struct regulator *core_reg; + struct gpio_desc *reset; + struct gpio_desc *enable; }; -static void l4f00242t03_reset(unsigned int gpio) +static void l4f00242t03_reset(struct gpio_desc *gpiod) { pr_debug("l4f00242t03_reset.\n"); - gpio_set_value(gpio, 1); + gpiod_set_value(gpiod, 1); mdelay(100); - gpio_set_value(gpio, 0); + gpiod_set_value(gpiod, 0); mdelay(10); /* tRES >= 100us */ - gpio_set_value(gpio, 1); + gpiod_set_value(gpiod, 1); mdelay(20); } @@ -45,7 +45,6 @@ static void l4f00242t03_reset(unsigned int gpio) static void l4f00242t03_lcd_init(struct spi_device *spi) { - struct l4f00242t03_pdata *pdata = dev_get_platdata(&spi->dev); struct l4f00242t03_priv *priv = spi_get_drvdata(spi); const u16 cmd[] = { 0x36, param(0), 0x3A, param(0x60) }; int ret; @@ -76,21 +75,20 @@ static void l4f00242t03_lcd_init(struct spi_device *spi) return; } - l4f00242t03_reset(pdata->reset_gpio); + l4f00242t03_reset(priv->reset); - gpio_set_value(pdata->data_enable_gpio, 1); + gpiod_set_value(priv->enable, 1); msleep(60); spi_write(spi, (const u8 *)cmd, ARRAY_SIZE(cmd) * sizeof(u16)); } static void l4f00242t03_lcd_powerdown(struct spi_device *spi) { - struct l4f00242t03_pdata *pdata = dev_get_platdata(&spi->dev); struct l4f00242t03_priv *priv = spi_get_drvdata(spi); dev_dbg(&spi->dev, "Powering down LCD\n"); - gpio_set_value(pdata->data_enable_gpio, 0); + gpiod_set_value(priv->enable, 0); regulator_disable(priv->io_reg); regulator_disable(priv->core_reg); @@ -168,13 +166,6 @@ static struct lcd_ops l4f_ops = { static int l4f00242t03_probe(struct spi_device *spi) { struct l4f00242t03_priv *priv; - struct l4f00242t03_pdata *pdata = dev_get_platdata(&spi->dev); - int ret; - - if (pdata == NULL) { - dev_err(&spi->dev, "Uninitialized platform data.\n"); - return -EINVAL; - } priv = devm_kzalloc(&spi->dev, sizeof(struct l4f00242t03_priv), GFP_KERNEL); @@ -187,21 +178,21 @@ static int l4f00242t03_probe(struct spi_device *spi) priv->spi = spi; - ret = devm_gpio_request_one(&spi->dev, pdata->reset_gpio, - GPIOF_OUT_INIT_HIGH, "lcd l4f00242t03 reset"); - if (ret) { + priv->reset = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(priv->reset)) { dev_err(&spi->dev, "Unable to get the lcd l4f00242t03 reset gpio.\n"); - return ret; + return PTR_ERR(priv->reset); } + gpiod_set_consumer_name(priv->reset, "lcd l4f00242t03 reset"); - ret = devm_gpio_request_one(&spi->dev, pdata->data_enable_gpio, - GPIOF_OUT_INIT_LOW, "lcd l4f00242t03 data enable"); - if (ret) { + priv->enable = devm_gpiod_get(&spi->dev, "enable", GPIOD_OUT_LOW); + if (IS_ERR(priv->enable)) { dev_err(&spi->dev, "Unable to get the lcd l4f00242t03 data en gpio.\n"); - return ret; + return PTR_ERR(priv->enable); } + gpiod_set_consumer_name(priv->enable, "lcd l4f00242t03 data enable"); priv->io_reg = devm_regulator_get(&spi->dev, "vdd"); if (IS_ERR(priv->io_reg)) { diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c index f68920131a4a..e94932c69f54 100644 --- a/drivers/video/backlight/lp855x_bl.c +++ b/drivers/video/backlight/lp855x_bl.c @@ -456,7 +456,7 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id) ret = regulator_enable(lp->enable); if (ret < 0) { dev_err(lp->dev, "failed to enable vddio: %d\n", ret); - return ret; + goto disable_supply; } /* @@ -471,24 +471,34 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id) ret = lp855x_configure(lp); if (ret) { dev_err(lp->dev, "device config err: %d", ret); - return ret; + goto disable_vddio; } ret = lp855x_backlight_register(lp); if (ret) { dev_err(lp->dev, "failed to register backlight. err: %d\n", ret); - return ret; + goto disable_vddio; } ret = sysfs_create_group(&lp->dev->kobj, &lp855x_attr_group); if (ret) { dev_err(lp->dev, "failed to register sysfs. err: %d\n", ret); - return ret; + goto disable_vddio; } backlight_update_status(lp->bl); + return 0; + +disable_vddio: + if (lp->enable) + regulator_disable(lp->enable); +disable_supply: + if (lp->supply) + regulator_disable(lp->supply); + + return ret; } static int lp855x_remove(struct i2c_client *cl) @@ -497,6 +507,8 @@ static int lp855x_remove(struct i2c_client *cl) lp->bl->props.brightness = 0; backlight_update_status(lp->bl); + if (lp->enable) + regulator_disable(lp->enable); if (lp->supply) regulator_disable(lp->supply); sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group); diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c index 3d276b30a78c..4c8c34b99441 100644 --- a/drivers/video/backlight/qcom-wled.c +++ b/drivers/video/backlight/qcom-wled.c @@ -15,16 +15,21 @@ /* From DT binding */ #define WLED_MAX_STRINGS 4 +#define MOD_A 0 +#define MOD_B 1 #define WLED_DEFAULT_BRIGHTNESS 2048 #define WLED_SOFT_START_DLY_US 10000 #define WLED3_SINK_REG_BRIGHT_MAX 0xFFF +#define WLED5_SINK_REG_BRIGHT_MAX_12B 0xFFF +#define WLED5_SINK_REG_BRIGHT_MAX_15B 0x7FFF /* WLED3/WLED4 control registers */ #define WLED3_CTRL_REG_FAULT_STATUS 0x08 #define WLED3_CTRL_REG_ILIM_FAULT_BIT BIT(0) #define WLED3_CTRL_REG_OVP_FAULT_BIT BIT(1) #define WLED4_CTRL_REG_SC_FAULT_BIT BIT(2) +#define WLED5_CTRL_REG_OVP_PRE_ALARM_BIT BIT(4) #define WLED3_CTRL_REG_INT_RT_STS 0x10 #define WLED3_CTRL_REG_OVP_FAULT_STATUS BIT(1) @@ -40,6 +45,7 @@ #define WLED3_CTRL_REG_OVP 0x4d #define WLED3_CTRL_REG_OVP_MASK GENMASK(1, 0) +#define WLED5_CTRL_REG_OVP_MASK GENMASK(3, 0) #define WLED3_CTRL_REG_ILIMIT 0x4e #define WLED3_CTRL_REG_ILIMIT_MASK GENMASK(2, 0) @@ -101,6 +107,44 @@ #define WLED4_SINK_REG_BRIGHT(n) (0x57 + (n * 0x10)) +/* WLED5 specific control registers */ +#define WLED5_CTRL_REG_OVP_INT_CTL 0x5f +#define WLED5_CTRL_REG_OVP_INT_TIMER_MASK GENMASK(2, 0) + +/* WLED5 specific sink registers */ +#define WLED5_SINK_REG_MOD_A_EN 0x50 +#define WLED5_SINK_REG_MOD_B_EN 0x60 +#define WLED5_SINK_REG_MOD_EN_MASK BIT(7) + +#define WLED5_SINK_REG_MOD_A_SRC_SEL 0x51 +#define WLED5_SINK_REG_MOD_B_SRC_SEL 0x61 +#define WLED5_SINK_REG_MOD_SRC_SEL_HIGH 0 +#define WLED5_SINK_REG_MOD_SRC_SEL_EXT 0x03 +#define WLED5_SINK_REG_MOD_SRC_SEL_MASK GENMASK(1, 0) + +#define WLED5_SINK_REG_MOD_A_BRIGHTNESS_WIDTH_SEL 0x52 +#define WLED5_SINK_REG_MOD_B_BRIGHTNESS_WIDTH_SEL 0x62 +#define WLED5_SINK_REG_BRIGHTNESS_WIDTH_12B 0 +#define WLED5_SINK_REG_BRIGHTNESS_WIDTH_15B 1 + +#define WLED5_SINK_REG_MOD_A_BRIGHTNESS_LSB 0x53 +#define WLED5_SINK_REG_MOD_A_BRIGHTNESS_MSB 0x54 +#define WLED5_SINK_REG_MOD_B_BRIGHTNESS_LSB 0x63 +#define WLED5_SINK_REG_MOD_B_BRIGHTNESS_MSB 0x64 + +#define WLED5_SINK_REG_MOD_SYNC_BIT 0x65 +#define WLED5_SINK_REG_SYNC_MOD_A_BIT BIT(0) +#define WLED5_SINK_REG_SYNC_MOD_B_BIT BIT(1) +#define WLED5_SINK_REG_SYNC_MASK GENMASK(1, 0) + +/* WLED5 specific per-'string' registers below */ +#define WLED5_SINK_REG_STR_FULL_SCALE_CURR(n) (0x72 + (n * 0x10)) + +#define WLED5_SINK_REG_STR_SRC_SEL(n) (0x73 + (n * 0x10)) +#define WLED5_SINK_REG_SRC_SEL_MOD_A 0 +#define WLED5_SINK_REG_SRC_SEL_MOD_B 1 +#define WLED5_SINK_REG_SRC_SEL_MASK GENMASK(1, 0) + struct wled_var_cfg { const u32 *values; u32 (*fn)(u32); @@ -125,6 +169,8 @@ struct wled_config { u32 num_strings; u32 string_i_limit; u32 enabled_strings[WLED_MAX_STRINGS]; + u32 mod_sel; + u32 cabc_sel; bool cs_out_en; bool ext_gen; bool cabc; @@ -147,14 +193,39 @@ struct wled { u32 max_brightness; u32 short_count; u32 auto_detect_count; + u32 version; bool disabled_by_short; bool has_short_detect; + bool cabc_disabled; int short_irq; int ovp_irq; struct wled_config cfg; struct delayed_work ovp_work; + + /* Configures the brightness. Applicable for wled3, wled4 and wled5 */ int (*wled_set_brightness)(struct wled *wled, u16 brightness); + + /* Configures the cabc register. Applicable for wled4 and wled5 */ + int (*wled_cabc_config)(struct wled *wled, bool enable); + + /* + * Toggles the sync bit for the brightness update to take place. + * Applicable for WLED3, WLED4 and WLED5. + */ + int (*wled_sync_toggle)(struct wled *wled); + + /* + * Time to wait before checking the OVP status after wled module enable. + * Applicable for WLED4 and WLED5. + */ + int (*wled_ovp_delay)(struct wled *wled); + + /* + * Determines if the auto string detection is required. + * Applicable for WLED4 and WLED5 + */ + bool (*wled_auto_detection_required)(struct wled *wled); }; static int wled3_set_brightness(struct wled *wled, u16 brightness) @@ -198,6 +269,28 @@ static int wled4_set_brightness(struct wled *wled, u16 brightness) return 0; } +static int wled5_set_brightness(struct wled *wled, u16 brightness) +{ + int rc, offset; + u16 low_limit = wled->max_brightness * 1 / 1000; + u8 v[2]; + + /* WLED5's lower limit is 0.1% */ + if (brightness < low_limit) + brightness = low_limit; + + v[0] = brightness & 0xff; + v[1] = (brightness >> 8) & 0x7f; + + offset = (wled->cfg.mod_sel == MOD_A) ? + WLED5_SINK_REG_MOD_A_BRIGHTNESS_LSB : + WLED5_SINK_REG_MOD_B_BRIGHTNESS_LSB; + + rc = regmap_bulk_write(wled->regmap, wled->sink_addr + offset, + v, 2); + return rc; +} + static void wled_ovp_work(struct work_struct *work) { struct wled *wled = container_of(work, @@ -237,7 +330,7 @@ static int wled_module_enable(struct wled *wled, int val) return 0; } -static int wled_sync_toggle(struct wled *wled) +static int wled3_sync_toggle(struct wled *wled) { int rc; unsigned int mask = GENMASK(wled->max_string_count - 1, 0); @@ -255,6 +348,88 @@ static int wled_sync_toggle(struct wled *wled) return rc; } +static int wled5_sync_toggle(struct wled *wled) +{ + int rc; + u8 val; + + val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT : + WLED5_SINK_REG_SYNC_MOD_B_BIT; + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT, + WLED5_SINK_REG_SYNC_MASK, val); + if (rc < 0) + return rc; + + return regmap_update_bits(wled->regmap, + wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT, + WLED5_SINK_REG_SYNC_MASK, 0); +} + +static int wled_ovp_fault_status(struct wled *wled, bool *fault_set) +{ + int rc; + u32 int_rt_sts, fault_sts; + + *fault_set = false; + rc = regmap_read(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_INT_RT_STS, + &int_rt_sts); + if (rc < 0) { + dev_err(wled->dev, "Failed to read INT_RT_STS rc=%d\n", rc); + return rc; + } + + rc = regmap_read(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_FAULT_STATUS, + &fault_sts); + if (rc < 0) { + dev_err(wled->dev, "Failed to read FAULT_STATUS rc=%d\n", rc); + return rc; + } + + if (int_rt_sts & WLED3_CTRL_REG_OVP_FAULT_STATUS) + *fault_set = true; + + if (wled->version == 4 && (fault_sts & WLED3_CTRL_REG_OVP_FAULT_BIT)) + *fault_set = true; + + if (wled->version == 5 && (fault_sts & (WLED3_CTRL_REG_OVP_FAULT_BIT | + WLED5_CTRL_REG_OVP_PRE_ALARM_BIT))) + *fault_set = true; + + if (*fault_set) + dev_dbg(wled->dev, "WLED OVP fault detected, int_rt_sts=0x%x fault_sts=0x%x\n", + int_rt_sts, fault_sts); + + return rc; +} + +static int wled4_ovp_delay(struct wled *wled) +{ + return WLED_SOFT_START_DLY_US; +} + +static int wled5_ovp_delay(struct wled *wled) +{ + int rc, delay_us; + u32 val; + u8 ovp_timer_ms[8] = {1, 2, 4, 8, 12, 16, 20, 24}; + + /* For WLED5, get the delay based on OVP timer */ + rc = regmap_read(wled->regmap, wled->ctrl_addr + + WLED5_CTRL_REG_OVP_INT_CTL, &val); + if (rc < 0) + delay_us = + ovp_timer_ms[val & WLED5_CTRL_REG_OVP_INT_TIMER_MASK] * 1000; + else + delay_us = 2 * WLED_SOFT_START_DLY_US; + + dev_dbg(wled->dev, "delay_time_us: %d\n", delay_us); + + return delay_us; +} + static int wled_update_status(struct backlight_device *bl) { struct wled *wled = bl_get_data(bl); @@ -275,7 +450,7 @@ static int wled_update_status(struct backlight_device *bl) goto unlock_mutex; } - rc = wled_sync_toggle(wled); + rc = wled->wled_sync_toggle(wled); if (rc < 0) { dev_err(wled->dev, "wled sync failed rc:%d\n", rc); goto unlock_mutex; @@ -298,6 +473,50 @@ unlock_mutex: return rc; } +static int wled4_cabc_config(struct wled *wled, bool enable) +{ + int i, j, rc; + u8 val; + + for (i = 0; i < wled->cfg.num_strings; i++) { + j = wled->cfg.enabled_strings[i]; + + val = enable ? WLED4_SINK_REG_STR_CABC_MASK : 0; + rc = regmap_update_bits(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_STR_CABC(j), + WLED4_SINK_REG_STR_CABC_MASK, val); + if (rc < 0) + return rc; + } + + return 0; +} + +static int wled5_cabc_config(struct wled *wled, bool enable) +{ + int rc, offset; + u8 reg; + + if (wled->cabc_disabled) + return 0; + + reg = enable ? wled->cfg.cabc_sel : 0; + offset = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_MOD_A_SRC_SEL : + WLED5_SINK_REG_MOD_B_SRC_SEL; + + rc = regmap_update_bits(wled->regmap, wled->sink_addr + offset, + WLED5_SINK_REG_MOD_SRC_SEL_MASK, reg); + if (rc < 0) { + pr_err("Error in configuring CABC rc=%d\n", rc); + return rc; + } + + if (!wled->cfg.cabc_sel) + wled->cabc_disabled = true; + + return 0; +} + #define WLED_SHORT_DLY_MS 20 #define WLED_SHORT_CNT_MAX 5 #define WLED_SHORT_RESET_CNT_DLY_US USEC_PER_SEC @@ -345,9 +564,10 @@ unlock_mutex: static void wled_auto_string_detection(struct wled *wled) { - int rc = 0, i; - u32 sink_config = 0, int_sts; + int rc = 0, i, delay_time_us; + u32 sink_config = 0; u8 sink_test = 0, sink_valid = 0, val; + bool fault_set; /* Read configured sink configuration */ rc = regmap_read(wled->regmap, wled->sink_addr + @@ -376,14 +596,9 @@ static void wled_auto_string_detection(struct wled *wled) } if (wled->cfg.cabc) { - for (i = 0; i < wled->cfg.num_strings; i++) { - rc = regmap_update_bits(wled->regmap, wled->sink_addr + - WLED4_SINK_REG_STR_CABC(i), - WLED4_SINK_REG_STR_CABC_MASK, - 0); - if (rc < 0) - goto failed_detect; - } + rc = wled->wled_cabc_config(wled, false); + if (rc < 0) + goto failed_detect; } /* Disable all sinks */ @@ -427,18 +642,17 @@ static void wled_auto_string_detection(struct wled *wled) goto failed_detect; } - usleep_range(WLED_SOFT_START_DLY_US, - WLED_SOFT_START_DLY_US + 1000); + delay_time_us = wled->wled_ovp_delay(wled); + usleep_range(delay_time_us, delay_time_us + 1000); - rc = regmap_read(wled->regmap, wled->ctrl_addr + - WLED3_CTRL_REG_INT_RT_STS, &int_sts); + rc = wled_ovp_fault_status(wled, &fault_set); if (rc < 0) { - dev_err(wled->dev, "Error in reading WLED3_CTRL_INT_RT_STS rc=%d\n", + dev_err(wled->dev, "Error in getting OVP fault_sts, rc=%d\n", rc); goto failed_detect; } - if (int_sts & WLED3_CTRL_REG_OVP_FAULT_STATUS) + if (fault_set) dev_dbg(wled->dev, "WLED OVP fault detected with SINK %d\n", i + 1); else @@ -478,30 +692,30 @@ static void wled_auto_string_detection(struct wled *wled) } /* Enable valid sinks */ - for (i = 0; i < wled->cfg.num_strings; i++) { - if (wled->cfg.cabc) { - rc = regmap_update_bits(wled->regmap, wled->sink_addr + - WLED4_SINK_REG_STR_CABC(i), - WLED4_SINK_REG_STR_CABC_MASK, - WLED4_SINK_REG_STR_CABC_MASK); - if (rc < 0) + if (wled->version == 4) { + for (i = 0; i < wled->cfg.num_strings; i++) { + if (sink_config & + BIT(WLED4_SINK_REG_CURR_SINK_SHFT + i)) + val = WLED4_SINK_REG_STR_MOD_MASK; + else + /* Disable modulator_en for unused sink */ + val = 0; + + rc = regmap_write(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_STR_MOD_EN(i), val); + if (rc < 0) { + dev_err(wled->dev, "Failed to configure MODULATOR_EN rc=%d\n", + rc); goto failed_detect; - } - - if (sink_config & BIT(WLED4_SINK_REG_CURR_SINK_SHFT + i)) - val = WLED4_SINK_REG_STR_MOD_MASK; - else - val = 0x0; /* Disable modulator_en for unused sink */ - - rc = regmap_write(wled->regmap, wled->sink_addr + - WLED4_SINK_REG_STR_MOD_EN(i), val); - if (rc < 0) { - dev_err(wled->dev, "Failed to configure MODULATOR_EN rc=%d\n", - rc); - goto failed_detect; + } } } + /* Enable CABC */ + rc = wled->wled_cabc_config(wled, true); + if (rc < 0) + goto failed_detect; + /* Restore the feedback setting */ rc = regmap_write(wled->regmap, wled->ctrl_addr + WLED3_CTRL_REG_FEEDBACK_CONTROL, 0); @@ -534,7 +748,8 @@ failed_detect: #define WLED_AUTO_DETECT_OVP_COUNT 5 #define WLED_AUTO_DETECT_CNT_DLY_US USEC_PER_SEC -static bool wled_auto_detection_required(struct wled *wled) + +static bool wled4_auto_detection_required(struct wled *wled) { s64 elapsed_time_us; @@ -567,32 +782,39 @@ static bool wled_auto_detection_required(struct wled *wled) return false; } +static bool wled5_auto_detection_required(struct wled *wled) +{ + if (!wled->cfg.auto_detection_enabled) + return false; + + /* + * Unlike WLED4, WLED5 has OVP fault density interrupt configuration + * i.e. to count the number of OVP alarms for a certain duration before + * triggering OVP fault interrupt. By default, number of OVP fault + * events counted before an interrupt is fired is 32 and the time + * interval is 12 ms. If we see one OVP fault interrupt, then that + * should qualify for a real OVP fault condition to run auto detection + * algorithm. + */ + return true; +} + static int wled_auto_detection_at_init(struct wled *wled) { int rc; - u32 fault_status, rt_status; + bool fault_set; if (!wled->cfg.auto_detection_enabled) return 0; - rc = regmap_read(wled->regmap, - wled->ctrl_addr + WLED3_CTRL_REG_INT_RT_STS, - &rt_status); + rc = wled_ovp_fault_status(wled, &fault_set); if (rc < 0) { - dev_err(wled->dev, "Failed to read RT status rc=%d\n", rc); - return rc; - } - - rc = regmap_read(wled->regmap, - wled->ctrl_addr + WLED3_CTRL_REG_FAULT_STATUS, - &fault_status); - if (rc < 0) { - dev_err(wled->dev, "Failed to read fault status rc=%d\n", rc); + dev_err(wled->dev, "Error in getting OVP fault_sts, rc=%d\n", + rc); return rc; } - if ((rt_status & WLED3_CTRL_REG_OVP_FAULT_STATUS) || - (fault_status & WLED3_CTRL_REG_OVP_FAULT_BIT)) { + if (fault_set) { mutex_lock(&wled->lock); wled_auto_string_detection(wled); mutex_unlock(&wled->lock); @@ -629,7 +851,7 @@ static irqreturn_t wled_ovp_irq_handler(int irq, void *_wled) int_sts, fault_sts); if (fault_sts & WLED3_CTRL_REG_OVP_FAULT_BIT) { - if (wled_auto_detection_required(wled)) { + if (wled->wled_auto_detection_required(wled)) { mutex_lock(&wled->lock); wled_auto_string_detection(wled); mutex_unlock(&wled->lock); @@ -811,17 +1033,12 @@ static int wled4_setup(struct wled *wled) wled->cfg.string_i_limit); if (rc < 0) return rc; - - addr = wled->sink_addr + - WLED4_SINK_REG_STR_CABC(j); - rc = regmap_update_bits(wled->regmap, addr, - WLED4_SINK_REG_STR_CABC_MASK, - wled->cfg.cabc ? - WLED4_SINK_REG_STR_CABC_MASK : 0); - if (rc < 0) - return rc; } + rc = wled4_cabc_config(wled, wled->cfg.cabc); + if (rc < 0) + return rc; + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN, WLED3_CTRL_REG_MOD_EN_MASK, @@ -835,7 +1052,7 @@ static int wled4_setup(struct wled *wled) if (rc < 0) return rc; - rc = wled_sync_toggle(wled); + rc = wled->wled_sync_toggle(wled); if (rc < 0) { dev_err(wled->dev, "Failed to toggle sync reg rc:%d\n", rc); return rc; @@ -857,6 +1074,119 @@ static const struct wled_config wled4_config_defaults = { .auto_detection_enabled = false, }; +static int wled5_setup(struct wled *wled) +{ + int rc, temp, i, j, offset; + u8 sink_en = 0; + u16 addr; + u32 val; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_OVP, + WLED5_CTRL_REG_OVP_MASK, wled->cfg.ovp); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_ILIMIT, + WLED3_CTRL_REG_ILIMIT_MASK, + wled->cfg.boost_i_limit); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_FREQ, + WLED3_CTRL_REG_FREQ_MASK, + wled->cfg.switch_freq); + if (rc < 0) + return rc; + + /* Per sink/string configuration */ + for (i = 0; i < wled->cfg.num_strings; ++i) { + j = wled->cfg.enabled_strings[i]; + addr = wled->sink_addr + + WLED4_SINK_REG_STR_FULL_SCALE_CURR(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK, + wled->cfg.string_i_limit); + if (rc < 0) + return rc; + + addr = wled->sink_addr + WLED5_SINK_REG_STR_SRC_SEL(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED5_SINK_REG_SRC_SEL_MASK, + wled->cfg.mod_sel == MOD_A ? + WLED5_SINK_REG_SRC_SEL_MOD_A : + WLED5_SINK_REG_SRC_SEL_MOD_B); + + temp = j + WLED4_SINK_REG_CURR_SINK_SHFT; + sink_en |= 1 << temp; + } + + rc = wled5_cabc_config(wled, wled->cfg.cabc_sel ? true : false); + if (rc < 0) + return rc; + + /* Enable one of the modulators A or B based on mod_sel */ + addr = wled->sink_addr + WLED5_SINK_REG_MOD_A_EN; + val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_MOD_EN_MASK : 0; + rc = regmap_update_bits(wled->regmap, addr, + WLED5_SINK_REG_MOD_EN_MASK, val); + if (rc < 0) + return rc; + + addr = wled->sink_addr + WLED5_SINK_REG_MOD_B_EN; + val = (wled->cfg.mod_sel == MOD_B) ? WLED5_SINK_REG_MOD_EN_MASK : 0; + rc = regmap_update_bits(wled->regmap, addr, + WLED5_SINK_REG_MOD_EN_MASK, val); + if (rc < 0) + return rc; + + offset = (wled->cfg.mod_sel == MOD_A) ? + WLED5_SINK_REG_MOD_A_BRIGHTNESS_WIDTH_SEL : + WLED5_SINK_REG_MOD_B_BRIGHTNESS_WIDTH_SEL; + + addr = wled->sink_addr + offset; + val = (wled->max_brightness == WLED5_SINK_REG_BRIGHT_MAX_15B) ? + WLED5_SINK_REG_BRIGHTNESS_WIDTH_15B : + WLED5_SINK_REG_BRIGHTNESS_WIDTH_12B; + rc = regmap_write(wled->regmap, addr, val); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, + WLED4_SINK_REG_CURR_SINK_MASK, sink_en); + if (rc < 0) + return rc; + + /* This updates only FSC configuration in WLED5 */ + rc = wled->wled_sync_toggle(wled); + if (rc < 0) { + pr_err("Failed to toggle sync reg rc:%d\n", rc); + return rc; + } + + rc = wled_auto_detection_at_init(wled); + if (rc < 0) + return rc; + + return 0; +} + +static const struct wled_config wled5_config_defaults = { + .boost_i_limit = 5, + .string_i_limit = 10, + .ovp = 4, + .num_strings = 4, + .switch_freq = 11, + .mod_sel = 0, + .cabc_sel = 0, + .cabc = false, + .external_pfet = false, + .auto_detection_enabled = false, +}; + static const u32 wled3_boost_i_limit_values[] = { 105, 385, 525, 805, 980, 1260, 1400, 1680, }; @@ -875,6 +1205,16 @@ static const struct wled_var_cfg wled4_boost_i_limit_cfg = { .size = ARRAY_SIZE(wled4_boost_i_limit_values), }; +static inline u32 wled5_boost_i_limit_values_fn(u32 idx) +{ + return 525 + (idx * 175); +} + +static const struct wled_var_cfg wled5_boost_i_limit_cfg = { + .fn = wled5_boost_i_limit_values_fn, + .size = 8, +}; + static const u32 wled3_ovp_values[] = { 35, 32, 29, 27, }; @@ -893,6 +1233,21 @@ static const struct wled_var_cfg wled4_ovp_cfg = { .size = ARRAY_SIZE(wled4_ovp_values), }; +static inline u32 wled5_ovp_values_fn(u32 idx) +{ + /* + * 0000 - 38.5 V + * 0001 - 37 V .. + * 1111 - 16 V + */ + return 38500 - (idx * 1500); +} + +static const struct wled_var_cfg wled5_ovp_cfg = { + .fn = wled5_ovp_values_fn, + .size = 16, +}; + static u32 wled3_num_strings_values_fn(u32 idx) { return idx + 1; @@ -940,6 +1295,14 @@ static const struct wled_var_cfg wled4_string_cfg = { .size = 16, }; +static const struct wled_var_cfg wled5_mod_sel_cfg = { + .size = 2, +}; + +static const struct wled_var_cfg wled5_cabc_sel_cfg = { + .size = 4, +}; + static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx) { if (idx >= cfg->size) @@ -951,7 +1314,7 @@ static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx) return idx; } -static int wled_configure(struct wled *wled, int version) +static int wled_configure(struct wled *wled) { struct wled_config *cfg = &wled->cfg; struct device *dev = wled->dev; @@ -1016,6 +1379,44 @@ static int wled_configure(struct wled *wled, int version) }, }; + const struct wled_u32_opts wled5_opts[] = { + { + .name = "qcom,current-boost-limit", + .val_ptr = &cfg->boost_i_limit, + .cfg = &wled5_boost_i_limit_cfg, + }, + { + .name = "qcom,current-limit-microamp", + .val_ptr = &cfg->string_i_limit, + .cfg = &wled4_string_i_limit_cfg, + }, + { + .name = "qcom,ovp-millivolt", + .val_ptr = &cfg->ovp, + .cfg = &wled5_ovp_cfg, + }, + { + .name = "qcom,switching-freq", + .val_ptr = &cfg->switch_freq, + .cfg = &wled3_switch_freq_cfg, + }, + { + .name = "qcom,num-strings", + .val_ptr = &cfg->num_strings, + .cfg = &wled4_num_strings_cfg, + }, + { + .name = "qcom,modulator-sel", + .val_ptr = &cfg->mod_sel, + .cfg = &wled5_mod_sel_cfg, + }, + { + .name = "qcom,cabc-sel", + .val_ptr = &cfg->cabc_sel, + .cfg = &wled5_cabc_sel_cfg, + }, + }; + const struct wled_bool_opts bool_opts[] = { { "qcom,cs-out", &cfg->cs_out_en, }, { "qcom,ext-gen", &cfg->ext_gen, }, @@ -1035,12 +1436,13 @@ static int wled_configure(struct wled *wled, int version) if (rc) wled->name = devm_kasprintf(dev, GFP_KERNEL, "%pOFn", dev->of_node); - switch (version) { + switch (wled->version) { case 3: u32_opts = wled3_opts; size = ARRAY_SIZE(wled3_opts); *cfg = wled3_config_defaults; wled->wled_set_brightness = wled3_set_brightness; + wled->wled_sync_toggle = wled3_sync_toggle; wled->max_string_count = 3; wled->sink_addr = wled->ctrl_addr; break; @@ -1050,6 +1452,31 @@ static int wled_configure(struct wled *wled, int version) size = ARRAY_SIZE(wled4_opts); *cfg = wled4_config_defaults; wled->wled_set_brightness = wled4_set_brightness; + wled->wled_sync_toggle = wled3_sync_toggle; + wled->wled_cabc_config = wled4_cabc_config; + wled->wled_ovp_delay = wled4_ovp_delay; + wled->wled_auto_detection_required = + wled4_auto_detection_required; + wled->max_string_count = 4; + + prop_addr = of_get_address(dev->of_node, 1, NULL, NULL); + if (!prop_addr) { + dev_err(wled->dev, "invalid IO resources\n"); + return -EINVAL; + } + wled->sink_addr = be32_to_cpu(*prop_addr); + break; + + case 5: + u32_opts = wled5_opts; + size = ARRAY_SIZE(wled5_opts); + *cfg = wled5_config_defaults; + wled->wled_set_brightness = wled5_set_brightness; + wled->wled_sync_toggle = wled5_sync_toggle; + wled->wled_cabc_config = wled5_cabc_config; + wled->wled_ovp_delay = wled5_ovp_delay; + wled->wled_auto_detection_required = + wled5_auto_detection_required; wled->max_string_count = 4; prop_addr = of_get_address(dev->of_node, 1, NULL, NULL); @@ -1186,7 +1613,6 @@ static int wled_probe(struct platform_device *pdev) struct backlight_device *bl; struct wled *wled; struct regmap *regmap; - int version; u32 val; int rc; @@ -1203,18 +1629,22 @@ static int wled_probe(struct platform_device *pdev) wled->regmap = regmap; wled->dev = &pdev->dev; - version = (uintptr_t)of_device_get_match_data(&pdev->dev); - if (!version) { + wled->version = (uintptr_t)of_device_get_match_data(&pdev->dev); + if (!wled->version) { dev_err(&pdev->dev, "Unknown device version\n"); return -ENODEV; } mutex_init(&wled->lock); - rc = wled_configure(wled, version); + rc = wled_configure(wled); if (rc) return rc; - switch (version) { + val = WLED3_SINK_REG_BRIGHT_MAX; + of_property_read_u32(pdev->dev.of_node, "max-brightness", &val); + wled->max_brightness = val; + + switch (wled->version) { case 3: wled->cfg.auto_detection_enabled = false; rc = wled3_setup(wled); @@ -1233,6 +1663,18 @@ static int wled_probe(struct platform_device *pdev) } break; + case 5: + wled->has_short_detect = true; + if (wled->cfg.cabc_sel) + wled->max_brightness = WLED5_SINK_REG_BRIGHT_MAX_12B; + + rc = wled5_setup(wled); + if (rc) { + dev_err(&pdev->dev, "wled5_setup failed\n"); + return rc; + } + break; + default: dev_err(wled->dev, "Invalid WLED version\n"); break; @@ -1254,7 +1696,7 @@ static int wled_probe(struct platform_device *pdev) memset(&props, 0, sizeof(struct backlight_properties)); props.type = BACKLIGHT_RAW; props.brightness = val; - props.max_brightness = WLED3_SINK_REG_BRIGHT_MAX; + props.max_brightness = wled->max_brightness; bl = devm_backlight_device_register(&pdev->dev, wled->name, &pdev->dev, wled, &wled_ops, &props); @@ -1277,6 +1719,7 @@ static const struct of_device_id wled_match_table[] = { { .compatible = "qcom,pm8941-wled", .data = (void *)3 }, { .compatible = "qcom,pmi8998-wled", .data = (void *)4 }, { .compatible = "qcom,pm660l-wled", .data = (void *)4 }, + { .compatible = "qcom,pm8150l-wled", .data = (void *)5 }, {} }; MODULE_DEVICE_TABLE(of, wled_match_table); diff --git a/include/linux/backlight.h b/include/linux/backlight.h index c7d6b2e8c3b5..56e4580d4f55 100644 --- a/include/linux/backlight.h +++ b/include/linux/backlight.h @@ -190,6 +190,7 @@ extern void backlight_force_update(struct backlight_device *bd, extern int backlight_register_notifier(struct notifier_block *nb); extern int backlight_unregister_notifier(struct notifier_block *nb); extern struct backlight_device *backlight_device_get_by_type(enum backlight_type type); +struct backlight_device *backlight_device_get_by_name(const char *name); extern int backlight_device_set_brightness(struct backlight_device *bd, unsigned long brightness); #define to_backlight_device(obj) container_of(obj, struct backlight_device, dev) diff --git a/include/linux/spi/l4f00242t03.h b/include/linux/spi/l4f00242t03.h deleted file mode 100644 index 831a5de7a0e2..000000000000 --- a/include/linux/spi/l4f00242t03.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * l4f00242t03.h -- Platform glue for Epson L4F00242T03 LCD - * - * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> - * Based on Marek Vasut work in lms283gf05.h -*/ - -#ifndef _INCLUDE_LINUX_SPI_L4F00242T03_H_ -#define _INCLUDE_LINUX_SPI_L4F00242T03_H_ - -struct l4f00242t03_pdata { - unsigned int reset_gpio; - unsigned int data_enable_gpio; -}; - -#endif /* _INCLUDE_LINUX_SPI_L4F00242T03_H_ */ |