diff options
101 files changed, 1756 insertions, 964 deletions
diff --git a/Documentation/devicetree/bindings/arc/archs-pct.txt b/Documentation/devicetree/bindings/arc/archs-pct.txt deleted file mode 100644 index e4b9dcee6d41..000000000000 --- a/Documentation/devicetree/bindings/arc/archs-pct.txt +++ /dev/null @@ -1,17 +0,0 @@ -* ARC HS Performance Counters - -The ARC HS can be configured with a pipeline performance monitor for counting -CPU and cache events like cache misses and hits. Like conventional PCT there -are 100+ hardware conditions dynamically mapped to up to 32 counters. -It also supports overflow interrupts. - -Required properties: - -- compatible : should contain - "snps,archs-pct" - -Example: - -pmu { - compatible = "snps,archs-pct"; -}; diff --git a/Documentation/devicetree/bindings/arc/snps,archs-pct.yaml b/Documentation/devicetree/bindings/arc/snps,archs-pct.yaml new file mode 100644 index 000000000000..532f7584f59f --- /dev/null +++ b/Documentation/devicetree/bindings/arc/snps,archs-pct.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arc/snps,archs-pct.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARC HS Performance Counters + +maintainers: + - Aryabhatta Dey <aryabhattadey35@gmail.com> + +description: + The ARC HS can be configured with a pipeline performance monitor for counting + CPU and cache events like cache misses and hits. Like conventional PCT there + are 100+ hardware conditions dynamically mapped to up to 32 counters. + It also supports overflow interrupts. + +properties: + compatible: + const: snps,archs-pct + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml index d50a60368e27..04a8c37b4aff 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml @@ -17,7 +17,7 @@ description: | The Coresight dummy source component is for the specific coresight source devices kernel don't have permission to access or configure. For some SOCs, there would be Coresight source trace components on sub-processor which - are conneted to AP processor via debug bus. For these devices, a dummy driver + are connected to AP processor via debug bus. For these devices, a dummy driver is needed to register them as Coresight source devices, so that paths can be created in the driver. It provides Coresight API for operations on dummy source devices, such as enabling and disabling them. It also provides the diff --git a/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml b/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml index 693f3fe7be60..cff1cdaadb13 100644 --- a/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml +++ b/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM Corstone1000 maintainers: - - Vishnu Banavath <vishnu.banavath@arm.com> - - Rui Miguel Silva <rui.silva@linaro.org> + - Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> + - Hugues Kamba Mpiana <hugues.kambampiana@arm.com> description: |+ ARM's Corstone1000 includes pre-verified Corstone SSE-710 subsystem that diff --git a/Documentation/devicetree/bindings/board/fsl,bcsr.yaml b/Documentation/devicetree/bindings/board/fsl,bcsr.yaml new file mode 100644 index 000000000000..df3dd8399671 --- /dev/null +++ b/Documentation/devicetree/bindings/board/fsl,bcsr.yaml @@ -0,0 +1,32 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/board/fsl,bcsr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Board Control and Status + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + enum: + - fsl,mpc8360mds-bcsr + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + board@f8000000 { + compatible = "fsl,mpc8360mds-bcsr"; + reg = <0xf8000000 0x8000>; + }; + diff --git a/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml b/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml new file mode 100644 index 000000000000..28b37772fb65 --- /dev/null +++ b/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/board/fsl,fpga-qixis-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale on-board FPGA connected on I2C bus + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,bsc9132qds-fpga + - const: fsl,fpga-qixis-i2c + - items: + - enum: + - fsl,ls1028aqds-fpga + - fsl,lx2160aqds-fpga + - const: fsl,fpga-qixis-i2c + - const: simple-mfd + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + mux-controller: + $ref: /schemas/mux/reg-mux.yaml + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + board-control@66 { + compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c"; + reg = <0x66>; + }; + }; + + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + board-control@66 { + compatible = "fsl,ls1028aqds-fpga", "fsl,fpga-qixis-i2c", + "simple-mfd"; + reg = <0x66>; + + mux-controller { + compatible = "reg-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x54 0xf0>; /* 0: reg 0x54, bits 7:4 */ + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/board/fsl,fpga-qixis.yaml b/Documentation/devicetree/bindings/board/fsl,fpga-qixis.yaml new file mode 100644 index 000000000000..5a3cd431ef6e --- /dev/null +++ b/Documentation/devicetree/bindings/board/fsl,fpga-qixis.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/board/fsl,fpga-qixis.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale on-board FPGA/CPLD + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + oneOf: + - items: + - const: fsl,p1022ds-fpga + - const: fsl,fpga-ngpixis + - items: + - enum: + - fsl,ls1088aqds-fpga + - fsl,ls1088ardb-fpga + - fsl,ls2080aqds-fpga + - fsl,ls2080ardb-fpga + - const: fsl,fpga-qixis + - items: + - enum: + - fsl,ls1043aqds-fpga + - fsl,ls1043ardb-fpga + - fsl,ls1046aqds-fpga + - fsl,ls1046ardb-fpga + - fsl,ls208xaqds-fpga + - const: fsl,fpga-qixis + - const: simple-mfd + - enum: + - fsl,ls1043ardb-cpld + - fsl,ls1046ardb-cpld + - fsl,t1040rdb-cpld + - fsl,t1042rdb-cpld + - fsl,t1042rdb_pi-cpld + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: + maxItems: 1 + +patternProperties: + '^mdio-mux@[a-f0-9,]+$': + $ref: /schemas/net/mdio-mux-mmioreg.yaml + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + board-control@3 { + compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0x30>; + interrupt-parent = <&mpic>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW 0 0>; + }; + + - | + board-control@3 { + compatible = "fsl,ls2080ardb-fpga", "fsl,fpga-qixis"; + reg = <0x3 0x10000>; + }; + diff --git a/Documentation/devicetree/bindings/board/fsl-board.txt b/Documentation/devicetree/bindings/board/fsl-board.txt deleted file mode 100644 index 9cde57015921..000000000000 --- a/Documentation/devicetree/bindings/board/fsl-board.txt +++ /dev/null @@ -1,81 +0,0 @@ -Freescale Reference Board Bindings - -This document describes device tree bindings for various devices that -exist on some Freescale reference boards. - -* Board Control and Status (BCSR) - -Required properties: - - - compatible : Should be "fsl,<board>-bcsr" - - reg : Offset and length of the register set for the device - -Example: - - bcsr@f8000000 { - compatible = "fsl,mpc8360mds-bcsr"; - reg = <f8000000 8000>; - }; - -* Freescale on-board FPGA - -This is the memory-mapped registers for on board FPGA. - -Required properties: -- compatible: should be a board-specific string followed by a string - indicating the type of FPGA. Example: - "fsl,<board>-fpga", "fsl,fpga-pixis", or - "fsl,<board>-fpga", "fsl,fpga-qixis" -- reg: should contain the address and the length of the FPGA register set. - -Optional properties: -- interrupts: should specify event (wakeup) IRQ. - -Example (P1022DS): - - board-control@3,0 { - compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis"; - reg = <3 0 0x30>; - interrupt-parent = <&mpic>; - interrupts = <8 8 0 0>; - }; - -Example (LS2080A-RDB): - - cpld@3,0 { - compatible = "fsl,ls2080ardb-fpga", "fsl,fpga-qixis"; - reg = <0x3 0 0x10000>; - }; - -* Freescale on-board FPGA connected on I2C bus - -Some Freescale boards like BSC9132QDS have on board FPGA connected on -the i2c bus. - -Required properties: -- compatible: Should be a board-specific string followed by a string - indicating the type of FPGA. Example: - "fsl,<board>-fpga", "fsl,fpga-qixis-i2c" -- reg: Should contain the address of the FPGA - -Example: - fpga: fpga@66 { - compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c"; - reg = <0x66>; - }; - -* Freescale on-board CPLD - -Some Freescale boards like T1040RDB have an on board CPLD connected. - -Required properties: -- compatible: Should be a board-specific string like "fsl,<board>-cpld" - Example: - "fsl,t1040rdb-cpld", "fsl,t1042rdb-cpld", "fsl,t1042rdb_pi-cpld" -- reg: should describe CPLD registers - -Example: - cpld@3,0 { - compatible = "fsl,t1040rdb-cpld"; - reg = <3 0 0x300>; - }; diff --git a/Documentation/devicetree/bindings/bus/qcom,ebi2.txt b/Documentation/devicetree/bindings/bus/qcom,ebi2.txt deleted file mode 100644 index 5058aa2c63b2..000000000000 --- a/Documentation/devicetree/bindings/bus/qcom,ebi2.txt +++ /dev/null @@ -1,138 +0,0 @@ -Qualcomm External Bus Interface 2 (EBI2) - -The EBI2 contains two peripheral blocks: XMEM and LCDC. The XMEM handles any -external memory (such as NAND or other memory-mapped peripherals) whereas -LCDC handles LCD displays. - -As it says it connects devices to an external bus interface, meaning address -lines (up to 9 address lines so can only address 1KiB external memory space), -data lines (16 bits), OE (output enable), ADV (address valid, used on some -NOR flash memories), WE (write enable). This on top of 6 different chip selects -(CS0 thru CS5) so that in theory 6 different devices can be connected. - -Apparently this bus is clocked at 64MHz. It has dedicated pins on the package -and the bus can only come out on these pins, however if some of the pins are -unused they can be left unconnected or remuxed to be used as GPIO or in some -cases other orthogonal functions as well. - -Also CS1 and CS2 has -A and -B signals. Why they have that is unclear to me. - -The chip selects have the following memory range assignments. This region of -memory is referred to as "Chip Peripheral SS FPB0" and is 168MB big. - -Chip Select Physical address base -CS0 GPIO134 0x1a800000-0x1b000000 (8MB) -CS1 GPIO39 (A) / GPIO123 (B) 0x1b000000-0x1b800000 (8MB) -CS2 GPIO40 (A) / GPIO124 (B) 0x1b800000-0x1c000000 (8MB) -CS3 GPIO133 0x1d000000-0x25000000 (128 MB) -CS4 GPIO132 0x1c800000-0x1d000000 (8MB) -CS5 GPIO131 0x1c000000-0x1c800000 (8MB) - -The APQ8060 Qualcomm Application Processor User Guide, 80-N7150-14 Rev. A, -August 6, 2012 contains some incomplete documentation of the EBI2. - -FIXME: the manual mentions "write precharge cycles" and "precharge cycles". -We have not been able to figure out which bit fields these correspond to -in the hardware, or what valid values exist. The current hypothesis is that -this is something just used on the FAST chip selects and that the SLOW -chip selects are understood fully. There is also a "byte device enable" -flag somewhere for 8bit memories. - -FIXME: The chipselects have SLOW and FAST configuration registers. It's a bit -unclear what this means, if they are mutually exclusive or can be used -together, or if some chip selects are hardwired to be FAST and others are SLOW -by design. - -The XMEM registers are totally undocumented but could be partially decoded -because the Cypress AN49576 Antioch Westbridge apparently has suspiciously -similar register layout, see: http://www.cypress.com/file/105771/download - -Required properties: -- compatible: should be one of: - "qcom,msm8660-ebi2" - "qcom,apq8060-ebi2" -- #address-cells: should be <2>: the first cell is the chipselect, - the second cell is the offset inside the memory range -- #size-cells: should be <1> -- ranges: should be set to: - ranges = <0 0x0 0x1a800000 0x00800000>, - <1 0x0 0x1b000000 0x00800000>, - <2 0x0 0x1b800000 0x00800000>, - <3 0x0 0x1d000000 0x08000000>, - <4 0x0 0x1c800000 0x00800000>, - <5 0x0 0x1c000000 0x00800000>; -- reg: two ranges of registers: EBI2 config and XMEM config areas -- reg-names: should be "ebi2", "xmem" -- clocks: two clocks, EBI_2X and EBI -- clock-names: should be "ebi2x", "ebi2" - -Optional subnodes: -- Nodes inside the EBI2 will be considered device nodes. - -The following optional properties are properties that can be tagged onto -any device subnode. We are assuming that there can be only ONE device per -chipselect subnode, else the properties will become ambiguous. - -Optional properties arrays for SLOW chip selects: -- qcom,xmem-recovery-cycles: recovery cycles is the time the memory continues to - drive the data bus after OE is de-asserted, in order to avoid contention on - the data bus. They are inserted when reading one CS and switching to another - CS or read followed by write on the same CS. Valid values 0 thru 15. Minimum - value is actually 1, so a value of 0 will still yield 1 recovery cycle. -- qcom,xmem-write-hold-cycles: write hold cycles, these are extra cycles - inserted after every write minimum 1. The data out is driven from the time - WE is asserted until CS is asserted. With a hold of 1 (value = 0), the CS - stays active for 1 extra cycle etc. Valid values 0 thru 15. -- qcom,xmem-write-delta-cycles: initial latency for write cycles inserted for - the first write to a page or burst memory. Valid values 0 thru 255. -- qcom,xmem-read-delta-cycles: initial latency for read cycles inserted for the - first read to a page or burst memory. Valid values 0 thru 255. -- qcom,xmem-write-wait-cycles: number of wait cycles for every write access, 0=1 - cycle. Valid values 0 thru 15. -- qcom,xmem-read-wait-cycles: number of wait cycles for every read access, 0=1 - cycle. Valid values 0 thru 15. - -Optional properties arrays for FAST chip selects: -- qcom,xmem-address-hold-enable: this is a boolean property stating that we - shall hold the address for an extra cycle to meet hold time requirements - with ADV assertion. -- qcom,xmem-adv-to-oe-recovery-cycles: the number of cycles elapsed before an OE - assertion, with respect to the cycle where ADV (address valid) is asserted. - 2 means 2 cycles between ADV and OE. Valid values 0, 1, 2 or 3. -- qcom,xmem-read-hold-cycles: the length in cycles of the first segment of a - read transfer. For a single read transfer this will be the time from CS - assertion to OE assertion. Valid values 0 thru 15. - - -Example: - -ebi2@1a100000 { - compatible = "qcom,apq8060-ebi2"; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0x0 0x1a800000 0x00800000>, - <1 0x0 0x1b000000 0x00800000>, - <2 0x0 0x1b800000 0x00800000>, - <3 0x0 0x1d000000 0x08000000>, - <4 0x0 0x1c800000 0x00800000>, - <5 0x0 0x1c000000 0x00800000>; - reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>; - reg-names = "ebi2", "xmem"; - clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>; - clock-names = "ebi2x", "ebi2"; - /* Make sure to set up the pin control for the EBI2 */ - pinctrl-names = "default"; - pinctrl-0 = <&foo_ebi2_pins>; - - foo-ebi2@2,0 { - compatible = "foo"; - reg = <2 0x0 0x100>; - (...) - qcom,xmem-recovery-cycles = <0>; - qcom,xmem-write-hold-cycles = <3>; - qcom,xmem-write-delta-cycles = <31>; - qcom,xmem-read-delta-cycles = <28>; - qcom,xmem-write-wait-cycles = <9>; - qcom,xmem-read-wait-cycles = <9>; - }; -}; diff --git a/Documentation/devicetree/bindings/bus/qcom,ebi2.yaml b/Documentation/devicetree/bindings/bus/qcom,ebi2.yaml new file mode 100644 index 000000000000..1b1fb3538e6e --- /dev/null +++ b/Documentation/devicetree/bindings/bus/qcom,ebi2.yaml @@ -0,0 +1,239 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/qcom,ebi2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm External Bus Interface 2 (EBI2) + +description: | + The EBI2 contains two peripheral blocks: XMEM and LCDC. The XMEM handles any + external memory (such as NAND or other memory-mapped peripherals) whereas + LCDC handles LCD displays. + + As it says it connects devices to an external bus interface, meaning address + lines (up to 9 address lines so can only address 1KiB external memory space), + data lines (16 bits), OE (output enable), ADV (address valid, used on some + NOR flash memories), WE (write enable). This on top of 6 different chip selects + (CS0 thru CS5) so that in theory 6 different devices can be connected. + + Apparently this bus is clocked at 64MHz. It has dedicated pins on the package + and the bus can only come out on these pins, however if some of the pins are + unused they can be left unconnected or remuxed to be used as GPIO or in some + cases other orthogonal functions as well. + + Also CS1 and CS2 has -A and -B signals. Why they have that is unclear to me. + + The chip selects have the following memory range assignments. This region of + memory is referred to as "Chip Peripheral SS FPB0" and is 168MB big. + + Chip Select Physical address base + CS0 GPIO134 0x1a800000-0x1b000000 (8MB) + CS1 GPIO39 (A) / GPIO123 (B) 0x1b000000-0x1b800000 (8MB) + CS2 GPIO40 (A) / GPIO124 (B) 0x1b800000-0x1c000000 (8MB) + CS3 GPIO133 0x1d000000-0x25000000 (128 MB) + CS4 GPIO132 0x1c800000-0x1d000000 (8MB) + CS5 GPIO131 0x1c000000-0x1c800000 (8MB) + + The APQ8060 Qualcomm Application Processor User Guide, 80-N7150-14 Rev. A, + August 6, 2012 contains some incomplete documentation of the EBI2. + + FIXME: the manual mentions "write precharge cycles" and "precharge cycles". + We have not been able to figure out which bit fields these correspond to + in the hardware, or what valid values exist. The current hypothesis is that + this is something just used on the FAST chip selects and that the SLOW + chip selects are understood fully. There is also a "byte device enable" + flag somewhere for 8bit memories. + + FIXME: The chipselects have SLOW and FAST configuration registers. It's a bit + unclear what this means, if they are mutually exclusive or can be used + together, or if some chip selects are hardwired to be FAST and others are SLOW + by design. + + The XMEM registers are totally undocumented but could be partially decoded + because the Cypress AN49576 Antioch Westbridge apparently has suspiciously + similar register layout, see: http://www.cypress.com/file/105771/download + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +properties: + compatible: + enum: + - qcom,apq8060-ebi2 + - qcom,msm8660-ebi2 + + reg: + items: + - description: EBI2 config region + - description: XMEM config region + + reg-names: + items: + - const: ebi2 + - const: xmem + + ranges: true + + clocks: + items: + - description: EBI_2X clock + - description: EBI clock + + clock-names: + items: + - const: ebi2x + - const: ebi2 + + '#address-cells': + const: 2 + + '#size-cells': + const: 1 + +required: + - compatible + - reg + - reg-names + - ranges + - clocks + - clock-names + - '#address-cells' + - '#size-cells' + +patternProperties: + "^.*@[0-5],[0-9a-f]+$": + type: object + additionalProperties: true + properties: + reg: + maxItems: 1 + + # SLOW chip selects + qcom,xmem-recovery-cycles: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + The time the memory continues to drive the data bus after OE + is de-asserted, in order to avoid contention on the data bus. + They are inserted when reading one CS and switching to another + CS or read followed by write on the same CS. Minimum value is + actually 1, so a value of 0 will still yield 1 recovery cycle. + minimum: 0 + maximum: 15 + + qcom,xmem-write-hold-cycles: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + The extra cycles inserted after every write minimum 1. The + data out is driven from the time WE is asserted until CS is + asserted. With a hold of 1 (value = 0), the CS stays active + for 1 extra cycle, etc. + minimum: 0 + maximum: 15 + + qcom,xmem-write-delta-cycles: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + The initial latency for write cycles inserted for the first + write to a page or burst memory. + minimum: 0 + maximum: 255 + + qcom,xmem-read-delta-cycles: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + The initial latency for read cycles inserted for the first + read to a page or burst memory. + minimum: 0 + maximum: 255 + + qcom,xmem-write-wait-cycles: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + The number of wait cycles for every write access. + minimum: 0 + maximum: 15 + + qcom,xmem-read-wait-cycles: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + The number of wait cycles for every read access. + minimum: 0 + maximum: 15 + + + # FAST chip selects + qcom,xmem-address-hold-enable: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Holds the address for an extra cycle to meet hold time + requirements with ADV assertion, when set to 1. + enum: [ 0, 1 ] + + qcom,xmem-adv-to-oe-recovery-cycles: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + The number of cycles elapsed before an OE assertion, with + respect to the cycle where ADV (address valid) is asserted. + minimum: 0 + maximum: 3 + + qcom,xmem-read-hold-cycles: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + The length in cycles of the first segment of a read transfer. + For a single read transfer this will be the time from CS + assertion to OE assertion. + minimum: 0 + maximum: 15 + + required: + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8660.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + + external-bus@1a100000 { + compatible = "qcom,msm8660-ebi2"; + reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>; + reg-names = "ebi2", "xmem"; + ranges = <0 0x0 0x1a800000 0x00800000>, + <1 0x0 0x1b000000 0x00800000>, + <2 0x0 0x1b800000 0x00800000>, + <3 0x0 0x1d000000 0x08000000>, + <4 0x0 0x1c800000 0x00800000>, + <5 0x0 0x1c000000 0x00800000>; + + clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>; + clock-names = "ebi2x", "ebi2"; + + #address-cells = <2>; + #size-cells = <1>; + + ethernet@2,0 { + compatible = "smsc,lan9221", "smsc,lan9115"; + reg = <2 0x0 0x100>; + + interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>, + <&tlmm 29 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; + + phy-mode = "mii"; + reg-io-width = <2>; + smsc,force-external-phy; + smsc,irq-push-pull; + + /* SLOW chipselect config */ + qcom,xmem-recovery-cycles = <0>; + qcom,xmem-write-hold-cycles = <3>; + qcom,xmem-write-delta-cycles = <31>; + qcom,xmem-read-delta-cycles = <28>; + qcom,xmem-write-wait-cycles = <9>; + qcom,xmem-read-wait-cycles = <9>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml index a2c6eea9871d..8b400da05fbe 100644 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml @@ -126,8 +126,6 @@ required: - compatible - reg - '#clock-cells' - - idt,shutdown - - idt,output-enable-active allOf: - if: diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml deleted file mode 100644 index 378b761237d3..000000000000 --- a/Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml +++ /dev/null @@ -1,54 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/clock/mediatek,mt6795-sys-clock.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: MediaTek System Clock Controller for MT6795 - -maintainers: - - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> - - Chun-Jie Chen <chun-jie.chen@mediatek.com> - -description: - The Mediatek system clock controller provides various clocks and system - configuration like reset and bus protection on MT6795. - -properties: - compatible: - items: - - enum: - - mediatek,mt6795-apmixedsys - - mediatek,mt6795-infracfg - - mediatek,mt6795-pericfg - - mediatek,mt6795-topckgen - - const: syscon - - reg: - maxItems: 1 - - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - -required: - - compatible - - reg - - '#clock-cells' - -additionalProperties: false - -examples: - - | - soc { - #address-cells = <2>; - #size-cells = <2>; - - topckgen: clock-controller@10000000 { - compatible = "mediatek,mt6795-topckgen", "syscon"; - reg = <0 0x10000000 0 0x1000>; - #clock-cells = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/cpu/idle-states.yaml b/Documentation/devicetree/bindings/cpu/idle-states.yaml index 239480ef7c30..385b0a511652 100644 --- a/Documentation/devicetree/bindings/cpu/idle-states.yaml +++ b/Documentation/devicetree/bindings/cpu/idle-states.yaml @@ -385,7 +385,7 @@ patternProperties: This property is required in idle state nodes of device tree meant for RISC-V systems. For more details on the suspend_type parameter - refer the SBI specifiation v0.3 (or higher) [7]. + refer the SBI specification v0.3 (or higher) [7]. local-timer-stop: description: diff --git a/Documentation/devicetree/bindings/cpu/nvidia,tegra186-ccplex-cluster.yaml b/Documentation/devicetree/bindings/cpu/nvidia,tegra186-ccplex-cluster.yaml deleted file mode 100644 index 16a448974561..000000000000 --- a/Documentation/devicetree/bindings/cpu/nvidia,tegra186-ccplex-cluster.yaml +++ /dev/null @@ -1,37 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/cpu/nvidia,tegra186-ccplex-cluster.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: NVIDIA Tegra186 CCPLEX Cluster - -maintainers: - - Thierry Reding <thierry.reding@gmail.com> - - Jon Hunter <jonathanh@nvidia.com> - -properties: - compatible: - const: nvidia,tegra186-ccplex-cluster - - reg: - maxItems: 1 - - nvidia,bpmp: - description: phandle to the BPMP used to query CPU frequency tables - $ref: /schemas/types.yaml#/definitions/phandle - -additionalProperties: false - -required: - - compatible - - reg - - nvidia,bpmp - -examples: - - | - ccplex@e000000 { - compatible = "nvidia,tegra186-ccplex-cluster"; - reg = <0x0e000000 0x400000>; - nvidia,bpmp = <&bpmp>; - }; diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml index 0681fc49aa1b..8e3a98aeec32 100644 --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml @@ -50,6 +50,14 @@ properties: - const: disp_axi minItems: 1 + dmas: + items: + - description: DMA specifier for the RX DMA channel. + + dma-names: + items: + - const: rx + interrupts: items: - description: LCDIF DMA interrupt @@ -156,6 +164,18 @@ allOf: interrupts: maxItems: 1 + - if: + not: + properties: + compatible: + contains: + enum: + - fsl,imx28-lcdif + then: + properties: + dmas: false + dma-names: false + examples: - | #include <dt-bindings/clock/imx6sx-clock.h> diff --git a/Documentation/devicetree/bindings/display/lvds.yaml b/Documentation/devicetree/bindings/display/lvds.yaml index 224db4932011..b74efbea3be2 100644 --- a/Documentation/devicetree/bindings/display/lvds.yaml +++ b/Documentation/devicetree/bindings/display/lvds.yaml @@ -16,7 +16,7 @@ maintainers: description: This binding extends the data mapping defined in lvds-data-mapping.yaml. It supports reversing the bit order on the formats defined there in order - to accomodate for even more specialized data formats, since a variety of + to accommodate for even more specialized data formats, since a variety of data formats and layouts is used to drive LVDS displays. properties: diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml index e78160d1aa24..10ed4b57232b 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml @@ -84,11 +84,7 @@ properties: - port@0 - port@1 - backlight: true - enable-gpios: true - power-supply: true - -additionalProperties: false +unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/dma/nxp,lpc3220-dmamux.yaml b/Documentation/devicetree/bindings/dma/nxp,lpc3220-dmamux.yaml new file mode 100644 index 000000000000..32f208744154 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/nxp,lpc3220-dmamux.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/nxp,lpc3220-dmamux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DMA multiplexer for LPC32XX SoC (DMA request router) + +maintainers: + - J.M.B. Downing <jonathan.downing@nautel.com> + - Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com> + +allOf: + - $ref: dma-router.yaml# + +properties: + compatible: + const: nxp,lpc3220-dmamux + + reg: + maxItems: 1 + + dma-masters: + description: phandle to a dma node compatible with arm,pl080 + maxItems: 1 + + "#dma-cells": + const: 3 + description: | + First two cells same as for device pointed in dma-masters. + Third cell represents mux value for the request. + +required: + - compatible + - reg + - dma-masters + +additionalProperties: false + +examples: + - | + dma-router@7c { + compatible = "nxp,lpc3220-dmamux"; + reg = <0x7c 0x8>; + dma-masters = <&dma>; + #dma-cells = <3>; + }; + +... diff --git a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt index 47e477cce6d2..1f9831540c97 100644 --- a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt +++ b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt @@ -20,7 +20,7 @@ Optional properties: memcpy channels in eDMA. Notes: -When requesting channel via ti,dra7-dma-crossbar, the DMA clinet must request +When requesting channel via ti,dra7-dma-crossbar, the DMA client must request the DMA event number as crossbar ID (input to the DMA crossbar). For ti,am335x-edma-crossbar: the meaning of parameters of dmas for clients: diff --git a/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml index c21549e0fba6..089166089498 100644 --- a/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml +++ b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml @@ -18,6 +18,7 @@ description: allOf: - $ref: gnss-common.yaml# + - $ref: /schemas/serial/serial-peripheral-props.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/gnss/gnss-common.yaml b/Documentation/devicetree/bindings/gnss/gnss-common.yaml index 963b926e30a7..d4430d2d6855 100644 --- a/Documentation/devicetree/bindings/gnss/gnss-common.yaml +++ b/Documentation/devicetree/bindings/gnss/gnss-common.yaml @@ -35,11 +35,6 @@ properties: GPIO line, this is used. maxItems: 1 - current-speed: - description: The baudrate in bits per second of the device as it comes - online, current active speed. - $ref: /schemas/types.yaml#/definitions/uint32 - additionalProperties: true examples: diff --git a/Documentation/devicetree/bindings/gnss/mediatek.yaml b/Documentation/devicetree/bindings/gnss/mediatek.yaml index c0eb35beb2ef..2b9e5be4ebf3 100644 --- a/Documentation/devicetree/bindings/gnss/mediatek.yaml +++ b/Documentation/devicetree/bindings/gnss/mediatek.yaml @@ -15,6 +15,7 @@ description: allOf: - $ref: gnss-common.yaml# + - $ref: /schemas/serial/serial-peripheral-props.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.yaml b/Documentation/devicetree/bindings/gnss/sirfstar.yaml index 0bbe684d82e1..7e5da89a5ad7 100644 --- a/Documentation/devicetree/bindings/gnss/sirfstar.yaml +++ b/Documentation/devicetree/bindings/gnss/sirfstar.yaml @@ -21,6 +21,7 @@ description: allOf: - $ref: gnss-common.yaml# + - $ref: /schemas/serial/serial-peripheral-props.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml index cd80668182b6..7d4b6d49e5ee 100644 --- a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml +++ b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml @@ -8,6 +8,7 @@ title: U-blox GNSS Receiver allOf: - $ref: gnss-common.yaml# + - $ref: /schemas/serial/serial-peripheral-props.yaml# maintainers: - Johan Hovold <johan@kernel.org> diff --git a/Documentation/devicetree/bindings/iio/accel/lis302.txt b/Documentation/devicetree/bindings/iio/accel/lis302.txt index 764e28ec1a0a..457539647f36 100644 --- a/Documentation/devicetree/bindings/iio/accel/lis302.txt +++ b/Documentation/devicetree/bindings/iio/accel/lis302.txt @@ -36,7 +36,7 @@ Optional properties for all bus drivers: - st,irq{1,2}-disable: disable IRQ 1/2 - st,irq{1,2}-ff-wu-1: raise IRQ 1/2 on FF_WU_1 condition - st,irq{1,2}-ff-wu-2: raise IRQ 1/2 on FF_WU_2 condition - - st,irq{1,2}-data-ready: raise IRQ 1/2 on data ready contition + - st,irq{1,2}-data-ready: raise IRQ 1/2 on data ready condition - st,irq{1,2}-click: raise IRQ 1/2 on click condition - st,irq-open-drain: consider IRQ lines open-drain - st,irq-active-low: make IRQ lines active low diff --git a/Documentation/devicetree/bindings/incomplete-devices.yaml b/Documentation/devicetree/bindings/incomplete-devices.yaml index cfc1d39441b1..4bb6c0141e9f 100644 --- a/Documentation/devicetree/bindings/incomplete-devices.yaml +++ b/Documentation/devicetree/bindings/incomplete-devices.yaml @@ -35,40 +35,184 @@ properties: - description: Legacy compatibles used on Macintosh devices enum: + - AAPL,3500 + - AAPL,7500 + - AAPL,8500 + - AAPL,9500 + - AAPL,accelerometer_1 + - AAPL,e411 + - AAPL,Gossamer + - AAPL,PowerBook1998 + - AAPL,ShinerESB - adm1030 + - amd-0137 + - B5221 - bmac+ + - burgundy + - cobalt + - cy28508 + - daca + - fcu + - gatwick + - gmac + - heathrow + - heathrow-ata - heathrow-media-bay + - i2sbus + - i2s-modem + - iMac + - K2-GMAC + - k2-i2c + - K2-Keylargo + - K2-UATA + - kauai-ata + - Keylargo + - keylargo-ata - keylargo-media-bay - lm87cimt - MAC,adm1030 - MAC,ds1775 + - MacRISC + - MacRISC2 + - MacRISC3 + - MacRISC4 - max6690 + - ohare - ohare-media-bay - ohare-swim3 + - PowerBook1,1 + - PowerBook2,1 + - PowerBook2,2 + - PowerBook3,1 + - PowerBook3,2 + - PowerBook3,3 + - PowerBook3,4 + - PowerBook3,5 + - PowerBook4,1 + - PowerBook4,2 + - PowerBook4,3 + - PowerBook5,1 + - PowerBook5,2 + - PowerBook5,3 + - PowerBook5,4 + - PowerBook5,5 + - PowerBook5,6 + - PowerBook5,7 + - PowerBook5,8 + - PowerBook5,9 + - PowerBook6,3 + - PowerBook6,5 + - PowerBook6,7 + - PowerMac10,1 + - PowerMac10,2 + - PowerMac1,1 + - PowerMac11,2 + - PowerMac12,1 + - PowerMac2,1 + - PowerMac2,2 + - PowerMac3,1 + - PowerMac3,4 + - PowerMac3,5 + - PowerMac3,6 + - PowerMac4,1 + - PowerMac4,2 + - PowerMac4,4 + - PowerMac4,5 + - PowerMac7,2 + - PowerMac7,3 + - PowerMac8,1 + - PowerMac8,2 + - PowerMac9,1 + - paddington + - RackMac1,1 + - RackMac1,2 + - RackMac3,1 + - screamer + - shasta-ata + - sms + - smu-rpm-fans - smu-sat + - smu-sensors + - snapper - swim3 + - tumbler + - u3-agp + - u3-dart + - u3-ht + - u4-dart + - u4-pcie + - U4-pcie + - uni-n-i2c + - uni-north - description: Legacy compatibles used on other PowerPC devices enum: + - 1682m-gizmo + - 1682m-gpio - 1682m-rng + - 1682m-sdc + - amcc,ppc440epx-rng + - amcc,ppc460ex-bcsr + - amcc,ppc460ex-crypto + - amcc,ppc460ex-rng + - amcc,ppc460sx-crypto + - amcc,ppc4xx-crypto + - amcc,sata-460ex + - CBEA,platform-open-pic + - CBEA,platform-spider-pic + - direct-mapped + - display + - gpio-mdio + - hawk-bridge + - hawk-pci + - IBM,CBEA - IBM,lhca - IBM,lhea - IBM,lhea-ethernet + - ibm,axon-msic + - Momentum,Apache + - Momentum,Maple + - mai-logic,articia-s + - mpc10x-pci - mpc5200b-fec-phy - mpc5200-serial - mpc5200-sram + - nintendo,flipper + - nintendo,flipper-exi + - nintendo,flipper-pi + - nintendo,flipper-pic + - nintendo,hollywood + - nintendo,hollywood-pic + - nintendo,latte-exi + - nintendo,latte-srnprot - ohci-be - ohci-bigendian - ohci-le + - PA6T-1682M + - pasemi,1682m-iob + - pasemi,localbus + - pasemi,localbus-nand + - pasemi,nemo + - pasemi,pwrficient + - pasemi,pwrficient-rng + - pasemi,rootbus + - pasemi,sdc + - soc + - sony,ps3 + - sti,platform-spider-pic - description: Legacy compatibles used on SPARC devices enum: - bq4802 - ds1287 + - i2cpcf,8584 - isa-m5819p - isa-m5823p - m5819 + - qcn - sab82532 + - su + - sun4v - SUNW,bbc-beep - SUNW,bbc-i2c - SUNW,CS4231 @@ -96,9 +240,13 @@ properties: - compat1 - compat2 - compat3 + - gpio-mockup + - gpio-simulator + - gpio-virtuser - linux,spi-loopback-test - mailbox-test - regulator-virtual-consumer + - test-device - description: Devices on MIPS platform, without any DTS users. These are diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml index 2025d6a5423e..76a286ec5959 100644 --- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml @@ -19,6 +19,7 @@ properties: - qcom,pmi632-vib - items: - enum: + - qcom,pm6150-vib - qcom,pm7250b-vib - qcom,pm7325b-vib - qcom,pm7550ba-vib diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 0f4a062c9d6f..5f051c666cbe 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -60,7 +60,7 @@ properties: The 4th cell is a phandle to a node describing a set of CPUs this interrupt is affine to. The interrupt must be a PPI, and the node pointed must be a subnode of the "ppi-partitions" subnode. For - interrupt types other than PPI or PPIs that are not partitionned, + interrupt types other than PPI or PPIs that are not partitioned, this cell must be zero. See the "ppi-partitions" node description below. diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt deleted file mode 100644 index e3fea0758d25..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt +++ /dev/null @@ -1,23 +0,0 @@ -Aspeed Vectored Interrupt Controller - -These bindings are for the Aspeed interrupt controller. The AST2400 and -AST2500 SoC families include a legacy register layout before a re-designed -layout, but the bindings do not prescribe the use of one or the other. - -Required properties: - -- compatible : "aspeed,ast2400-vic" - "aspeed,ast2500-vic" - -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The value shall be 1. - -Example: - - vic: interrupt-controller@1e6c0080 { - compatible = "aspeed,ast2400-vic"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x1e6c0080 0x80>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.yaml b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.yaml new file mode 100644 index 000000000000..73e8b9a39bd7 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/aspeed,ast2400-vic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed Vectored Interrupt Controller + +maintainers: + - Andrew Jeffery <andrew@codeconstruct.com.au> + +description: + The AST2400 and AST2500 SoC families include a legacy register layout before + a redesigned layout, but the bindings do not prescribe the use of one or the + other. + +properties: + compatible: + enum: + - aspeed,ast2400-vic + - aspeed,ast2500-vic + + reg: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + description: + Specifies the number of cells needed to encode an interrupt source. It + must be 1 as the VIC has no configuration options for interrupt sources. + The single cell defines the interrupt number. + + valid-sources: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 + description: + A bitmap of supported sources for the implementation. + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + +allOf: + - $ref: /schemas/interrupt-controller.yaml + +additionalProperties: false + +examples: + - | + interrupt-controller@1e6c0080 { + compatible = "aspeed,ast2400-vic"; + reg = <0x1e6c0080 0x80>; + interrupt-controller; + #interrupt-cells = <1>; + valid-sources = <0xffffffff 0x0007ffff>; + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml index aae676ba30ed..6076ddf56bb5 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml @@ -17,6 +17,7 @@ properties: - enum: - fsl,imx8m-irqsteer - fsl,imx8mp-irqsteer + - fsl,imx8qm-irqsteer - fsl,imx8qxp-irqsteer - const: fsl,imx-irqsteer @@ -83,6 +84,7 @@ allOf: contains: enum: - fsl,imx8mp-irqsteer + - fsl,imx8qm-irqsteer - fsl,imx8qxp-irqsteer then: required: diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml index 985fa10abb99..b1ea08a41bb0 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml @@ -27,6 +27,7 @@ properties: items: - enum: - qcom,qdu1000-pdc + - qcom,sa8255p-pdc - qcom,sa8775p-pdc - qcom,sc7180-pdc - qcom,sc7280-pdc diff --git a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml index 54d6d1f08e24..17e971903ee9 100644 --- a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml +++ b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml @@ -66,7 +66,7 @@ patternProperties: IMAXled = 160000 * (592 / 600.5) * (1 / max-current-switch-number) And the minimum output current formula: IMINled = 3300 * (592 / 600.5) * (1 / max-current-switch-number) - where max-current-switch-number is determinated by led configuration + where max-current-switch-number is determined by led configuration and depends on how leds are physically connected to the led driver. allOf: diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt index c80065a1eb97..bf0c998b8603 100644 --- a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt @@ -24,7 +24,7 @@ Required properties: number of completion messages for which FlexRM will inject one MSI interrupt to CPU. - The 3nd cell contains MSI timer value representing time for + The 3rd cell contains MSI timer value representing time for which FlexRM will wait to accumulate N completion messages where N is the value specified by 2nd cell above. If FlexRM does not get required number of completion messages in time diff --git a/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml b/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml index 1978fbb77a6c..535acf2b88a9 100644 --- a/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml +++ b/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml @@ -16,7 +16,7 @@ description: can be connected to CMOS image sensors from various vendors, supporting both MIPI CSI-2 and parallel interfaces. It can also output on either MIPI CSI-2 or parallel. The hardware is capable of transmitting and receiving MIPI - interlaved data strams with data types or multiple virtual channel + interleaved data streams with data types or multiple virtual channel identifiers. allOf: diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml index 271d0577a83c..2ba27b230559 100644 --- a/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml +++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml @@ -77,7 +77,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32-array maxItems: 2 description: | - An array specyfing minimum image size in pixels at the FIMC input and + An array specifying minimum image size in pixels at the FIMC input and output DMA, in the first and second cell respectively. Default value is <16 16>. diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml index d381125a0a15..efee3de0d9ad 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml @@ -25,7 +25,7 @@ properties: description: The PMIC provides intb and errb IRQ lines. The errb IRQ line is used for fatal IRQs which will cause the PMIC to shut down power outputs. - In many systems this will shut down the SoC contolling the PMIC and + In many systems this will shut down the SoC controlling the PMIC and connecting/handling the errb can be omitted. However, there are cases where the SoC is not powered by the PMIC or has a short time backup energy to handle shutdown of critical hardware. In that case it may be diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml index bc8b5940b1c5..a4be642de33c 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml @@ -53,7 +53,7 @@ properties: samsung,s2mps11-wrstbi-ground: description: | Indicates that WRSTBI pin of PMIC is pulled down. When the system is - suspended it will always go down thus triggerring unwanted buck warm + suspended it will always go down thus triggering unwanted buck warm reset (setting buck voltages to default values). type: boolean diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt index 06e9dd7a0d96..dfd8683ede0c 100644 --- a/Documentation/devicetree/bindings/mfd/twl6040.txt +++ b/Documentation/devicetree/bindings/mfd/twl6040.txt @@ -2,7 +2,7 @@ Texas Instruments TWL6040 family The TWL6040s are 8-channel high quality low-power audio codecs providing audio, vibra and GPO functionality on OMAP4+ platforms. -They are connected ot the host processor via i2c for commands, McPDM for audio +They are connected to the host processor via i2c for commands, McPDM for audio data and commands. Required properties: diff --git a/Documentation/devicetree/bindings/misc/aspeed,ast2400-cvic.yaml b/Documentation/devicetree/bindings/misc/aspeed,ast2400-cvic.yaml new file mode 100644 index 000000000000..accf1a7ecf12 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/aspeed,ast2400-cvic.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/aspeed,ast2400-cvic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed Coprocessor Vectored Interrupt Controller + +maintainers: + - Andrew Jeffery <andrew@codeconstruct.com.au> + +description: + The Aspeed AST2400 and AST2500 SoCs have a controller that provides interrupts + to the ColdFire coprocessor. It's not a normal interrupt controller and it + would be rather inconvenient to create an interrupt tree for it, as it + somewhat shares some of the same sources as the main ARM interrupt controller + but with different numbers. + + The AST2500 also supports a software generated interrupt. + +properties: + compatible: + items: + - enum: + - aspeed,ast2400-cvic + - aspeed,ast2500-cvic + - const: aspeed,cvic + + reg: + maxItems: 1 + + valid-sources: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 1 + description: + A bitmap of supported sources for the implementation. + + copro-sw-interrupts: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + A list of interrupt numbers that can be used as software interrupts from + the ARM to the coprocessor. + +required: + - compatible + - reg + - valid-sources + +additionalProperties: false + +examples: + - | + interrupt-controller@1e6c2000 { + compatible = "aspeed,ast2500-cvic", "aspeed,cvic"; + reg = <0x1e6c2000 0x80>; + valid-sources = <0xffffffff>; + copro-sw-interrupts = <1>; + }; diff --git a/Documentation/devicetree/bindings/misc/aspeed,cvic.txt b/Documentation/devicetree/bindings/misc/aspeed,cvic.txt deleted file mode 100644 index d62c783d1d5e..000000000000 --- a/Documentation/devicetree/bindings/misc/aspeed,cvic.txt +++ /dev/null @@ -1,35 +0,0 @@ -* ASPEED AST2400 and AST2500 coprocessor interrupt controller - -This file describes the bindings for the interrupt controller present -in the AST2400 and AST2500 BMC SoCs which provides interrupt to the -ColdFire coprocessor. - -It is not a normal interrupt controller and it would be rather -inconvenient to create an interrupt tree for it as it somewhat shares -some of the same sources as the main ARM interrupt controller but with -different numbers. - -The AST2500 supports a SW generated interrupt - -Required properties: -- reg: address and length of the register for the device. -- compatible: "aspeed,cvic" and one of: - "aspeed,ast2400-cvic" - or - "aspeed,ast2500-cvic" - -- valid-sources: One cell, bitmap of supported sources for the implementation - -Optional properties; -- copro-sw-interrupts: List of interrupt numbers that can be used as - SW interrupts from the ARM to the coprocessor. - (AST2500 only) - -Example: - - cvic: copro-interrupt-controller@1e6c2000 { - compatible = "aspeed,ast2500-cvic"; - valid-sources = <0xffffffff>; - copro-sw-interrupts = <1>; - reg = <0x1e6c2000 0x80>; - }; diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/brcm,bluetooth.yaml index 4a1bfc2b3584..3c410cadff23 100644 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/brcm,bluetooth.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/net/broadcom-bluetooth.yaml# +$id: http://devicetree.org/schemas/net/bluetooth/brcm,bluetooth.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Broadcom Bluetooth Chips @@ -119,29 +119,28 @@ properties: items: - const: host-wakeup - max-speed: true - current-speed: true - required: - compatible dependencies: brcm,requires-autobaud-mode: [ shutdown-gpios ] -if: - not: - properties: - compatible: - contains: - enum: - - brcm,bcm20702a1 - - brcm,bcm4329-bt - - brcm,bcm4330-bt -then: - properties: - reset-gpios: false - -additionalProperties: false +allOf: + - $ref: /schemas/serial/serial-peripheral-props.yaml# + - if: + not: + properties: + compatible: + contains: + enum: + - brcm,bcm20702a1 + - brcm,bcm4329-bt + - brcm,bcm4330-bt + then: + properties: + reset-gpios: false + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/net/marvell-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/marvell,88w8897.yaml index 188a42ca6ceb..2fc36874deb7 100644 --- a/Documentation/devicetree/bindings/net/marvell-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/marvell,88w8897.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/net/marvell-bluetooth.yaml# +$id: http://devicetree.org/schemas/net/bluetooth/marvell,88w8897.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Marvell Bluetooth chips @@ -19,13 +19,13 @@ properties: - mrvl,88w8897 - mrvl,88w8997 - max-speed: - description: see Documentation/devicetree/bindings/serial/serial.yaml + max-speed: true required: - compatible allOf: + - $ref: /schemas/serial/serial-peripheral-props.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/bluetooth/mediatek,bluetooth.txt index 988c72685cbf..988c72685cbf 100644 --- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/bluetooth/mediatek,bluetooth.txt diff --git a/Documentation/devicetree/bindings/net/nokia-bluetooth.txt b/Documentation/devicetree/bindings/net/bluetooth/nokia,h4p-bluetooth.txt index 42be7dc9a70b..42be7dc9a70b 100644 --- a/Documentation/devicetree/bindings/net/nokia-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/bluetooth/nokia,h4p-bluetooth.txt diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml index 64a5c5004862..7bb68311c609 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml @@ -72,7 +72,7 @@ properties: description: VDD_RFA_CMN supply regulator handle vddrfa0p8-supply: - description: VDD_RFA_0P8 suppply regulator handle + description: VDD_RFA_0P8 supply regulator handle vddrfa1p7-supply: description: VDD_RFA_1P7 supply regulator handle @@ -98,8 +98,7 @@ properties: vddwlmx-supply: description: VDD_WLMX supply regulator handle - max-speed: - description: see Documentation/devicetree/bindings/serial/serial.yaml + max-speed: true firmware-name: description: specify the name of nvm firmware to load @@ -118,6 +117,7 @@ additionalProperties: false allOf: - $ref: bluetooth-controller.yaml# + - $ref: /schemas/serial/serial-peripheral-props.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/realtek,bluetooth.yaml index 043e118c605c..7d567122bac9 100644 --- a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/realtek,bluetooth.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/net/realtek-bluetooth.yaml# +$id: http://devicetree.org/schemas/net/bluetooth/realtek,bluetooth.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS Bluetooth @@ -46,6 +46,9 @@ properties: required: - compatible +allOf: + - $ref: /schemas/serial/serial-peripheral-props.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/ti,bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/ti,bluetooth.yaml index 81616f9fb493..290abc22e18a 100644 --- a/Documentation/devicetree/bindings/net/ti,bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/ti,bluetooth.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/net/ti,bluetooth.yaml# +$id: http://devicetree.org/schemas/net/bluetooth/ti,bluetooth.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments Bluetooth Chips @@ -74,6 +74,9 @@ properties: required: - compatible +allOf: + - $ref: /schemas/serial/serial-peripheral-props.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml b/Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml new file mode 100644 index 000000000000..da836477e8ba --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,cpm-enet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Network for cpm enet + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + oneOf: + - enum: + - fsl,cpm1-scc-enet + - fsl,cpm2-scc-enet + - fsl,cpm1-fec-enet + - fsl,cpm2-fcc-enet + - fsl,qe-enet + - items: + - enum: + - fsl,mpc8272-fcc-enet + - const: fsl,cpm2-fcc-enet + + reg: + minItems: 1 + maxItems: 3 + + interrupts: + maxItems: 1 + + fsl,cpm-command: + $ref: /schemas/types.yaml#/definitions/uint32 + description: cpm command + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: ethernet-controller.yaml + +unevaluatedProperties: false + +examples: + - | + ethernet@11300 { + compatible = "fsl,mpc8272-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x11300 0x20 0x8400 0x100 0x11390 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <20 8>; + interrupt-parent = <&pic>; + phy-handle = <&phy0>; + fsl,cpm-command = <0x12000300>; + }; + diff --git a/Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml b/Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml new file mode 100644 index 000000000000..b1791a3c490e --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,cpm-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale CPM MDIO Device + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + oneOf: + - enum: + - fsl,pq1-fec-mdio + - fsl,cpm2-mdio-bitbang + - items: + - const: fsl,mpc8272ads-mdio-bitbang + - const: fsl,mpc8272-mdio-bitbang + - const: fsl,cpm2-mdio-bitbang + + reg: + maxItems: 1 + + fsl,mdio-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + description: pin of port C controlling mdio data + + fsl,mdc-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + description: pin of port C controlling mdio clock + +required: + - compatible + - reg + +allOf: + - $ref: mdio.yaml# + +unevaluatedProperties: false + +examples: + - | + mdio@10d40 { + compatible = "fsl,mpc8272ads-mdio-bitbang", + "fsl,mpc8272-mdio-bitbang", + "fsl,cpm2-mdio-bitbang"; + reg = <0x10d40 0x14>; + #address-cells = <1>; + #size-cells = <0>; + fsl,mdio-pin = <12>; + fsl,mdc-pin = <13>; + }; + diff --git a/Documentation/devicetree/bindings/net/maxim,ds26522.txt b/Documentation/devicetree/bindings/net/maxim,ds26522.txt deleted file mode 100644 index ee8bb725f245..000000000000 --- a/Documentation/devicetree/bindings/net/maxim,ds26522.txt +++ /dev/null @@ -1,13 +0,0 @@ -* Maxim (Dallas) DS26522 Dual T1/E1/J1 Transceiver - -Required properties: -- compatible: Should contain "maxim,ds26522". -- reg: SPI CS. -- spi-max-frequency: SPI clock. - -Example: - slic@1 { - compatible = "maxim,ds26522"; - reg = <1>; - spi-max-frequency = <2000000>; /* input clock */ - }; diff --git a/Documentation/devicetree/bindings/net/maxim,ds26522.yaml b/Documentation/devicetree/bindings/net/maxim,ds26522.yaml new file mode 100644 index 000000000000..6c97eda217e8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/maxim,ds26522.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/maxim,ds26522.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim (Dallas) DS26522 Dual T1/E1/J1 Transceiver + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + items: + - const: maxim,ds26522 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + transceiver@1 { + compatible = "maxim,ds26522"; + reg = <1>; + spi-max-frequency = <2000000>; /* input clock */ + }; + }; diff --git a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt index e1bb12711fbf..602cf952b92b 100644 --- a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt +++ b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt @@ -36,7 +36,7 @@ Optional properties: 3-tuple setting for each (up to 3) supported link speed on the host. Range is 0 to 273000 in unit of uV. Default is 0. -- apm,tx-pre-cursor2 : 2st pre-cursor emphasis taps control. Two set of +- apm,tx-pre-cursor2 : 2nd pre-cursor emphasis taps control. Two set of 3-tuple setting for each (up to 3) supported link speed on the host. Range is 0 to 127400 in unit uV. Default is 0x0. diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt7988-xfi-tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt7988-xfi-tphy.yaml index cfb3ca97f87c..cc9d0d4eeeeb 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,mt7988-xfi-tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,mt7988-xfi-tphy.yaml @@ -41,7 +41,7 @@ properties: description: One instance of the T-PHY on MT7988 suffers from a performance problem in 10GBase-R mode which needs a work-around in the driver. - This flag enables a work-around ajusting an analog phy setting and + This flag enables a work-around adjusting an analog phy setting and is required for XFI Port0 of the MT7988 SoC to be in compliance with the SFP specification. diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml index acba0720125d..423b7c4e62f2 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -240,7 +240,7 @@ patternProperties: The force mode is used to manually switch the shared phy mode between USB3 and PCIe, when USB3 phy type is selected by the consumer, and force-mode is set, will cause phy's power and pipe toggled and force - phy as USB3 mode which switched from default PCIe mode. But perfer to + phy as USB3 mode which switched from default PCIe mode. But prefer to use the property "mediatek,syscon-type" for newer SoCs that support it. type: boolean diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml index 90d79491e281..d16a543a7848 100644 --- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml @@ -43,7 +43,7 @@ properties: qcom,tune-usb2-amplitude: $ref: /schemas/types.yaml#/definitions/uint8 - description: High-Speed trasmit amplitude + description: High-Speed transmit amplitude minimum: 0 maximum: 15 default: 8 diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index e1eb45a9eda4..a28d77748095 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -11,7 +11,7 @@ maintainers: - Alexandre TORGUE <alexandre.torgue@foss.st.com> description: | - STMicroelectronics's STM32 MCUs intregrate a GPIO and Pin mux/config hardware + STMicroelectronics's STM32 MCUs integrate a GPIO and Pin mux/config hardware controller. It controls the input/output settings on the available pins and also provides ability to multiplex and configure the output of various on-chip controllers onto these pads. @@ -164,7 +164,7 @@ patternProperties: This macro is available here: - include/dt-bindings/pinctrl/stm32-pinfunc.h Some examples of using macro: - /* GPIO A9 set as alernate function 2 */ + /* GPIO A9 set as alternate function 2 */ ... { pinmux = <STM32_PINMUX('A', 9, AF2)>; }; diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt index a6c8978964aa..128b55be67b7 100644 --- a/Documentation/devicetree/bindings/power/wakeup-source.txt +++ b/Documentation/devicetree/bindings/power/wakeup-source.txt @@ -26,7 +26,7 @@ List of legacy properties and respective binding document 3. "linux,wakeup" Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt Documentation/devicetree/bindings/mfd/tc3589x.txt Documentation/devicetree/bindings/input/touchscreen/ads7846.txt -4. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt +4. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml 5. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml 6. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml index c5dc3c2820d7..adc6b3f36fde 100644 --- a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml +++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml @@ -93,7 +93,7 @@ patternProperties: Each SCP core has own cache memory. The SRAM and L1TCM are shared by cores. The power of cache, SRAM and L1TCM power should be enabled before booting SCP cores. The size of cache, SRAM, and L1TCM are varied - on differnt SoCs. + on different SoCs. The SCP cores do not use an MMU, but has a set of registers to control the translations between 32-bit CPU addresses into system bus diff --git a/Documentation/devicetree/bindings/rtc/fsl,ls-ftm-alarm.yaml b/Documentation/devicetree/bindings/rtc/fsl,ls-ftm-alarm.yaml index 388102ae30cd..3ec111f2fdc4 100644 --- a/Documentation/devicetree/bindings/rtc/fsl,ls-ftm-alarm.yaml +++ b/Documentation/devicetree/bindings/rtc/fsl,ls-ftm-alarm.yaml @@ -42,7 +42,7 @@ properties: minItems: 1 description: phandle to rcpm node, Please refer - Documentation/devicetree/bindings/soc/fsl/rcpm.txt + Documentation/devicetree/bindings/soc/fsl/fsl,rcpm.yaml big-endian: $ref: /schemas/types.yaml#/definitions/flag diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.yaml b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.yaml index a5d67563cd53..29d48da81531 100644 --- a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.yaml +++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.yaml @@ -78,7 +78,7 @@ properties: we use nvidia,adjust-baud-rates. As an example, consider there is deviation observed in TX for baud rates as listed below. 0 - to 9600 has 1% deviation 9600 to 115200 2% deviation. This slight deviation is expcted and + to 9600 has 1% deviation 9600 to 115200 2% deviation. This slight deviation is expected and Tegra UART is expected to handle it. Due to the issue stated above, baud rate on Tegra UART should be set equal to or above deviation observed for avoiding frame errors. Property should be set like this: diff --git a/Documentation/devicetree/bindings/serial/serial-peripheral-props.yaml b/Documentation/devicetree/bindings/serial/serial-peripheral-props.yaml new file mode 100644 index 000000000000..b4a73214d20d --- /dev/null +++ b/Documentation/devicetree/bindings/serial/serial-peripheral-props.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/serial-peripheral-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Serial-attached Devices + +maintainers: + - Rob Herring <robh@kernel.org> + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> + +description: + Devices connected over serial/UART, expressed as children of a serial + controller, might need similar properties, e.g. for configuring the baud + rate. + +properties: + max-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The maximum baud rate the device operates at. + This should only be present if the maximum is less than the slave + device can support. For example, a particular board has some + signal quality issue or the host processor can't support higher + baud rates. + + current-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The current baud rate the device operates at. + This should only be present in case a driver has no chance to know + the baud rate of the slave device. + Examples: + * device supports auto-baud + * the rate is setup by a bootloader and there is no way to reset + the device + * device baud rate is configured by its firmware but there is no + way to request the actual settings + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index ffc9198ae214..30c85768d980 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -92,6 +92,8 @@ patternProperties: if: type: object then: + additionalProperties: true + $ref: serial-peripheral-props.yaml# description: Serial attached devices shall be a child node of the host UART device the slave device is attached to. It is expected that the attached @@ -103,28 +105,6 @@ patternProperties: description: Compatible of the device connected to the serial port. - max-speed: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - The maximum baud rate the device operates at. - This should only be present if the maximum is less than the slave - device can support. For example, a particular board has some - signal quality issue or the host processor can't support higher - baud rates. - - current-speed: - $ref: /schemas/types.yaml#/definitions/uint32 - description: | - The current baud rate the device operates at. - This should only be present in case a driver has no chance to know - the baud rate of the slave device. - Examples: - * device supports auto-baud - * the rate is setup by a bootloader and there is no way to reset - the device - * device baud rate is configured by its firmware but there is no - way to request the actual settings - required: - compatible diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml new file mode 100644 index 000000000000..64ffbf75dd9d --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: High-Level Data Link Control(HDLC) + +description: HDLC part in Universal communication controllers (UCCs) + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: fsl,ucc-hdlc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + + rx-clock-name: + $ref: /schemas/types.yaml#/definitions/string + oneOf: + - pattern: "^brg([0-9]|1[0-6])$" + - pattern: "^clk([0-9]|1[0-9]|2[0-4])$" + + tx-clock-name: + $ref: /schemas/types.yaml#/definitions/string + oneOf: + - pattern: "^brg([0-9]|1[0-6])$" + - pattern: "^clk([0-9]|1[0-9]|2[0-4])$" + + fsl,tdm-interface: + $ref: /schemas/types.yaml#/definitions/flag + description: Specify that hdlc is based on tdm-interface + + fsl,rx-sync-clock: + $ref: /schemas/types.yaml#/definitions/string + description: rx-sync + enum: + - none + - rsync_pin + - brg9 + - brg10 + - brg11 + - brg13 + - brg14 + - brg15 + + fsl,tx-sync-clock: + $ref: /schemas/types.yaml#/definitions/string + description: tx-sync + enum: + - none + - tsync_pin + - brg9 + - brg10 + - brg11 + - brg13 + - brg14 + - brg15 + + fsl,tdm-framer-type: + $ref: /schemas/types.yaml#/definitions/string + description: required for tdm interface + enum: [e1, t1] + + fsl,tdm-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: number of TDM ID + + fsl,tx-timeslot-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + required for tdm interface. + time slot mask for TDM operation. Indicates which time + slots used for transmitting and receiving. + + fsl,rx-timeslot-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + required for tdm interface. + time slot mask for TDM operation. Indicates which time + slots used for transmitting and receiving. + + fsl,siram-entry-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + required for tdm interface + Must be 0,2,4...64. the number of TDM entry. + + fsl,tdm-internal-loopback: + $ref: /schemas/types.yaml#/definitions/flag + description: + optional for tdm interface + Internal loopback connecting on TDM layer. + + fsl,hmask: + $ref: /schemas/types.yaml#/definitions/uint16 + description: | + HDLC address recognition. Set to zero to disable + address filtering of packets: + fsl,hmask = /bits/ 16 <0x0000>; + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + communication@2000 { + compatible = "fsl,ucc-hdlc"; + reg = <0x2000 0x200>; + rx-clock-name = "clk8"; + tx-clock-name = "clk9"; + fsl,rx-sync-clock = "rsync_pin"; + fsl,tx-sync-clock = "tsync_pin"; + fsl,tx-timeslot-mask = <0xfffffffe>; + fsl,rx-timeslot-mask = <0xfffffffe>; + fsl,tdm-framer-type = "e1"; + fsl,tdm-id = <0>; + fsl,siram-entry-id = <0>; + fsl,tdm-interface; + }; + + - | + communication@2000 { + compatible = "fsl,ucc-hdlc"; + reg = <0x2000 0x200>; + rx-clock-name = "brg1"; + tx-clock-name = "brg1"; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt deleted file mode 100644 index 6d2dd8a31482..000000000000 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt +++ /dev/null @@ -1,130 +0,0 @@ -* Network - -Currently defined compatibles: -- fsl,cpm1-scc-enet -- fsl,cpm2-scc-enet -- fsl,cpm1-fec-enet -- fsl,cpm2-fcc-enet (third resource is GFEMR) -- fsl,qe-enet - -Example: - - ethernet@11300 { - compatible = "fsl,mpc8272-fcc-enet", - "fsl,cpm2-fcc-enet"; - reg = <11300 20 8400 100 11390 1>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <20 8>; - interrupt-parent = <&PIC>; - phy-handle = <&PHY0>; - fsl,cpm-command = <12000300>; - }; - -* MDIO - -Currently defined compatibles: -fsl,pq1-fec-mdio (reg is same as first resource of FEC device) -fsl,cpm2-mdio-bitbang (reg is port C registers) - -Properties for fsl,cpm2-mdio-bitbang: -fsl,mdio-pin : pin of port C controlling mdio data -fsl,mdc-pin : pin of port C controlling mdio clock - -Example: - mdio@10d40 { - compatible = "fsl,mpc8272ads-mdio-bitbang", - "fsl,mpc8272-mdio-bitbang", - "fsl,cpm2-mdio-bitbang"; - reg = <10d40 14>; - #address-cells = <1>; - #size-cells = <0>; - fsl,mdio-pin = <12>; - fsl,mdc-pin = <13>; - }; - -* HDLC - -Currently defined compatibles: -- fsl,ucc-hdlc - -Properties for fsl,ucc-hdlc: -- rx-clock-name -- tx-clock-name - Usage: required - Value type: <string> - Definition : Must be "brg1"-"brg16" for internal clock source, - Must be "clk1"-"clk24" for external clock source. - -- fsl,tdm-interface - Usage: optional - Value type: <empty> - Definition : Specify that hdlc is based on tdm-interface - -The property below is dependent on fsl,tdm-interface: -- fsl,rx-sync-clock - Usage: required - Value type: <string> - Definition : Must be "none", "rsync_pin", "brg9-11" and "brg13-15". - -- fsl,tx-sync-clock - Usage: required - Value type: <string> - Definition : Must be "none", "tsync_pin", "brg9-11" and "brg13-15". - -- fsl,tdm-framer-type - Usage: required for tdm interface - Value type: <string> - Definition : "e1" or "t1".Now e1 and t1 are used, other framer types - are not supported. - -- fsl,tdm-id - Usage: required for tdm interface - Value type: <u32> - Definition : number of TDM ID - -- fsl,tx-timeslot-mask -- fsl,rx-timeslot-mask - Usage: required for tdm interface - Value type: <u32> - Definition : time slot mask for TDM operation. Indicates which time - slots used for transmitting and receiving. - -- fsl,siram-entry-id - Usage: required for tdm interface - Value type: <u32> - Definition : Must be 0,2,4...64. the number of TDM entry. - -- fsl,tdm-internal-loopback - usage: optional for tdm interface - value type: <empty> - Definition : Internal loopback connecting on TDM layer. -- fsl,hmask - usage: optional - Value type: <u16> - Definition: HDLC address recognition. Set to zero to disable - address filtering of packets: - fsl,hmask = /bits/ 16 <0x0000>; - -Example for tdm interface: - - ucc@2000 { - compatible = "fsl,ucc-hdlc"; - rx-clock-name = "clk8"; - tx-clock-name = "clk9"; - fsl,rx-sync-clock = "rsync_pin"; - fsl,tx-sync-clock = "tsync_pin"; - fsl,tx-timeslot-mask = <0xfffffffe>; - fsl,rx-timeslot-mask = <0xfffffffe>; - fsl,tdm-framer-type = "e1"; - fsl,tdm-id = <0>; - fsl,siram-entry-id = <0>; - fsl,tdm-interface; - }; - -Example for hdlc without tdm interface: - - ucc@2000 { - compatible = "fsl,ucc-hdlc"; - rx-clock-name = "brg1"; - tx-clock-name = "brg1"; - }; diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml index 2a456c8af992..2958ef45b3e9 100644 --- a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml @@ -23,6 +23,9 @@ properties: - fsl,ls1028a-scfg - fsl,ls1043a-scfg - fsl,ls1046a-scfg + - fsl,ls1088a-isc + - fsl,ls2080a-isc + - fsl,lx2160a-isc - const: syscon reg: diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,rcpm.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,rcpm.yaml new file mode 100644 index 000000000000..03d71ab930d7 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,rcpm.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/fsl,rcpm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Run Control and Power Management + +description: + The RCPM performs all device-level tasks associated with device run control + and power management. + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,p2041-rcpm + - fsl,p3041-rcpm + - fsl,p4080-rcpm + - fsl,p5020-rcpm + - fsl,p5040-rcpm + - const: fsl,qoriq-rcpm-1.0 + - items: + - enum: + - fsl,b4420-rcpm + - fsl,b4860-rcpm + - fsl,t4240-rcpm + - const: fsl,qoriq-rcpm-2.0 + - items: + - enum: + - fsl,t1040-rcpm + - const: fsl,qoriq-rcpm-2.1 + - items: + - enum: + - fsl,ls1012a-rcpm + - fsl,ls1021a-rcpm + - fsl,ls1028a-rcpm + - fsl,ls1043a-rcpm + - fsl,ls1046a-rcpm + - fsl,ls1088a-rcpm + - fsl,ls208xa-rcpm + - fsl,lx2160a-rcpm + - const: fsl,qoriq-rcpm-2.1+ + + reg: + maxItems: 1 + + "#fsl,rcpm-wakeup-cells": + description: | + The number of IPPDEXPCR register cells in the + fsl,rcpm-wakeup property. + + Freescale RCPM Wakeup Source Device Tree Bindings + + Required fsl,rcpm-wakeup property should be added to a device node if + the device can be used as a wakeup source. + + fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR + register cells. The number of IPPDEXPCR register cells is defined in + "#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is + the bit mask that should be set in IPPDEXPCR0, and the second register + cell is for IPPDEXPCR1, and so on. + + Note: IPPDEXPCR(IP Powerdown Exception Control Register) provides a + mechanism for keeping certain blocks awake during STANDBY and MEM, in + order to use them as wake-up sources. + + little-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: + RCPM register block is Little Endian. Without it RCPM + will be Big Endian (default case). + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + global-utilities@e2000 { + compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0"; + reg = <0xe2000 0x1000>; + #fsl,rcpm-wakeup-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt deleted file mode 100644 index 5a33619d881d..000000000000 --- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt +++ /dev/null @@ -1,69 +0,0 @@ -* Run Control and Power Management -------------------------------------------- -The RCPM performs all device-level tasks associated with device run control -and power management. - -Required properites: - - reg : Offset and length of the register set of the RCPM block. - - #fsl,rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the - fsl,rcpm-wakeup property. - - compatible : Must contain a chip-specific RCPM block compatible string - and (if applicable) may contain a chassis-version RCPM compatible - string. Chip-specific strings are of the form "fsl,<chip>-rcpm", - such as: - * "fsl,p2041-rcpm" - * "fsl,p5020-rcpm" - * "fsl,t4240-rcpm" - - Chassis-version strings are of the form "fsl,qoriq-rcpm-<version>", - such as: - * "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm - * "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm - * "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm - * "fsl,qoriq-rcpm-2.1+": for chassis 2.1+ rcpm - -All references to "1.0" and "2.0" refer to the QorIQ chassis version to -which the chip complies. -Chassis Version Example Chips ---------------- ------------------------------- -1.0 p4080, p5020, p5040, p2041, p3041 -2.0 t4240, b4860, b4420 -2.1 t1040, -2.1+ ls1021a, ls1012a, ls1043a, ls1046a - -Optional properties: - - little-endian : RCPM register block is Little Endian. Without it RCPM - will be Big Endian (default case). - -Example: -The RCPM node for T4240: - rcpm: global-utilities@e2000 { - compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0"; - reg = <0xe2000 0x1000>; - #fsl,rcpm-wakeup-cells = <2>; - }; - -* Freescale RCPM Wakeup Source Device Tree Bindings -------------------------------------------- -Required fsl,rcpm-wakeup property should be added to a device node if the device -can be used as a wakeup source. - - - fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR - register cells. The number of IPPDEXPCR register cells is defined in - "#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is - the bit mask that should be set in IPPDEXPCR0, and the second register - cell is for IPPDEXPCR1, and so on. - - Note: IPPDEXPCR(IP Powerdown Exception Control Register) provides a - mechanism for keeping certain blocks awake during STANDBY and MEM, in - order to use them as wake-up sources. - -Example: - lpuart0: serial@2950000 { - compatible = "fsl,ls1021a-lpuart"; - reg = <0x0 0x2950000 0x0 0x1000>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sysclk>; - clock-names = "ipg"; - fsl,rcpm-wakeup = <&rcpm 0x0 0x40000000>; - }; diff --git a/Documentation/devicetree/bindings/sound/everest,es8326.yaml b/Documentation/devicetree/bindings/sound/everest,es8326.yaml index 8c82d47375ec..d51431df7acf 100644 --- a/Documentation/devicetree/bindings/sound/everest,es8326.yaml +++ b/Documentation/devicetree/bindings/sound/everest,es8326.yaml @@ -32,7 +32,7 @@ properties: description: | just the value of reg 57. Bit(3) decides whether the jack polarity is inverted. Bit(2) decides whether the button on the headset is inverted. - Bit(1)/(0) decides the mic properity to be OMTP/CTIA or auto. + Bit(1)/(0) decides the mic property to be OMTP/CTIA or auto. minimum: 0x00 maximum: 0x0f default: 0x0f diff --git a/Documentation/devicetree/bindings/sound/serial-midi.yaml b/Documentation/devicetree/bindings/sound/serial-midi.yaml index f6a807329a5a..3b2f6dd5bffa 100644 --- a/Documentation/devicetree/bindings/sound/serial-midi.yaml +++ b/Documentation/devicetree/bindings/sound/serial-midi.yaml @@ -22,6 +22,9 @@ description: configure the clocks of the parent serial device so that a requested baud of 38.4 kBaud results in the standard MIDI baud rate, and set the 'current-speed' property to 38400 (default) +allOf: + - $ref: /schemas/serial/serial-peripheral-props.yaml# + properties: compatible: const: serial-midi diff --git a/Documentation/devicetree/bindings/sound/st,sta350.txt b/Documentation/devicetree/bindings/sound/st,sta350.txt index 307398ef2317..e3d84864e0e4 100644 --- a/Documentation/devicetree/bindings/sound/st,sta350.txt +++ b/Documentation/devicetree/bindings/sound/st,sta350.txt @@ -77,7 +77,7 @@ Optional properties: - st,odd-pwm-speed-mode: If present, PWM speed mode run on odd speed mode (341.3 kHz) on all - channels. If not present, normal PWM spped mode (384 kHz) will be used. + channels. If not present, normal PWM speed mode (384 kHz) will be used. - st,distortion-compensation: If present, distortion compensation variable uses DCC coefficient. diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index d45690d6a465..a12fddc81955 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -311,7 +311,7 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> - // Example 1 (new calbiration data: for pre v1 IP): + // Example 1 (new calibration data: for pre v1 IP): thermal-sensor@4a9000 { compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; reg = <0x4a9000 0x1000>, /* TM */ diff --git a/Documentation/devicetree/bindings/timer/fsl,ftm-timer.txt b/Documentation/devicetree/bindings/timer/fsl,ftm-timer.txt deleted file mode 100644 index aa8c40230e5e..000000000000 --- a/Documentation/devicetree/bindings/timer/fsl,ftm-timer.txt +++ /dev/null @@ -1,31 +0,0 @@ -Freescale FlexTimer Module (FTM) Timer - -Required properties: - -- compatible : should be "fsl,ftm-timer" -- reg : Specifies base physical address and size of the register sets for the - clock event device and clock source device. -- interrupts : Should be the clock event device interrupt. -- clocks : The clocks provided by the SoC to drive the timer, must contain an - entry for each entry in clock-names. -- clock-names : Must include the following entries: - o "ftm-evt" - o "ftm-src" - o "ftm-evt-counter-en" - o "ftm-src-counter-en" -- big-endian: One boolean property, the big endian mode will be in use if it is - present, or the little endian mode will be in use for all the device registers. - -Example: -ftm: ftm@400b8000 { - compatible = "fsl,ftm-timer"; - reg = <0x400b8000 0x1000 0x400b9000 0x1000>; - interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "ftm-evt", "ftm-src", - "ftm-evt-counter-en", "ftm-src-counter-en"; - clocks = <&clks VF610_CLK_FTM2>, - <&clks VF610_CLK_FTM3>, - <&clks VF610_CLK_FTM2_EXT_FIX_EN>, - <&clks VF610_CLK_FTM3_EXT_FIX_EN>; - big-endian; -}; diff --git a/Documentation/devicetree/bindings/timer/fsl,ftm-timer.yaml b/Documentation/devicetree/bindings/timer/fsl,ftm-timer.yaml new file mode 100644 index 000000000000..0e4a8ddc3de3 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/fsl,ftm-timer.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/fsl,ftm-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale FlexTimer Module (FTM) Timer + +maintainers: + - Animesh Agarwal <animeshagarwal28@gmail.com> + +properties: + compatible: + const: fsl,ftm-timer + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: The clocks provided by the SoC to drive the timer, must + contain an entry for each entry in clock-names. + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: ftm-evt + - const: ftm-src + - const: ftm-evt-counter-en + - const: ftm-src-counter-en + + big-endian: true + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/vf610-clock.h> + #include <dt-bindings/interrupt-controller/irq.h> + + ftm@400b8000 { + compatible = "fsl,ftm-timer"; + reg = <0x400b8000 0x1000>; + interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "ftm-evt", "ftm-src", "ftm-evt-counter-en", "ftm-src-counter-en"; + clocks = <&clks VF610_CLK_FTM2>, <&clks VF610_CLK_FTM3>, + <&clks VF610_CLK_FTM2_EXT_FIX_EN>, <&clks VF610_CLK_FTM3_EXT_FIX_EN>; + big-endian; + }; diff --git a/Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.txt b/Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.txt deleted file mode 100644 index 51b05a0e70d1..000000000000 --- a/Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.txt +++ /dev/null @@ -1,26 +0,0 @@ -* NXP LPC3220 timer - -The NXP LPC3220 timer is used on a wide range of NXP SoCs. This -includes LPC32xx, LPC178x, LPC18xx and LPC43xx parts. - -Required properties: -- compatible: - Should be "nxp,lpc3220-timer". -- reg: - Address and length of the register set. -- interrupts: - Reference to the timer interrupt -- clocks: - Should contain a reference to timer clock. -- clock-names: - Should contain "timerclk". - -Example: - -timer1: timer@40085000 { - compatible = "nxp,lpc3220-timer"; - reg = <0x40085000 0x1000>; - interrupts = <13>; - clocks = <&ccu1 CLK_CPU_TIMER1>; - clock-names = "timerclk"; -}; diff --git a/Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.yaml new file mode 100644 index 000000000000..3ae2eb0625da --- /dev/null +++ b/Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/nxp,lpc3220-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC3220 timer + +maintainers: + - Animesh Agarwal <animeshagarwal28@gmail.com> + +description: | + The NXP LPC3220 timer is used on a wide range of NXP SoCs. This includes + LPC32xx, LPC178x, LPC18xx and LPC43xx parts. + +properties: + compatible: + const: nxp,lpc3220-timer + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: timerclk + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/lpc32xx-clock.h> + #include <dt-bindings/interrupt-controller/irq.h> + + timer@4004c000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x4004c000 0x1000>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER1>; + clock-names = "timerclk"; + }; diff --git a/Documentation/devicetree/bindings/timer/ti,da830-timer.yaml b/Documentation/devicetree/bindings/timer/ti,da830-timer.yaml new file mode 100644 index 000000000000..e9646f4e86cc --- /dev/null +++ b/Documentation/devicetree/bindings/timer/ti,da830-timer.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/ti,da830-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI DaVinci Timer + +maintainers: + - Kousik Sanagavarapu <five231003@gmail.com> + +description: | + This is a 64-bit timer found on TI's DaVinci architecture devices. The timer + can be configured as a general-purpose 64-bit timer, dual general-purpose + 32-bit timers. When configured as dual 32-bit timers, each half can operate + in conjunction (chain mode) or independently (unchained mode) of each other. + + The timer is a free running up-counter and can generate interrupts when the + counter reaches preset counter values. + +properties: + compatible: + const: ti,da830-timer + + reg: + maxItems: 1 + + interrupts: + minItems: 2 + maxItems: 10 + + interrupt-names: + minItems: 2 + items: + - const: tint12 + - const: tint34 + - const: cmpint0 + - const: cmpint1 + - const: cmpint2 + - const: cmpint3 + - const: cmpint4 + - const: cmpint5 + - const: cmpint6 + - const: cmpint7 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + +additionalProperties: false + +examples: + - | + timer@20000 { + compatible = "ti,da830-timer"; + reg = <0x20000 0x1000>; + interrupts = <21>, <22>; + interrupt-names = "tint12", "tint34"; + clocks = <&pll0_auxclk>; + }; + +... diff --git a/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt deleted file mode 100644 index 29bf91ccf5b7..000000000000 --- a/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt +++ /dev/null @@ -1,37 +0,0 @@ -* Device tree bindings for Texas Instruments DaVinci timer - -This document provides bindings for the 64-bit timer in the DaVinci -architecture devices. The timer can be configured as a general-purpose 64-bit -timer, dual general-purpose 32-bit timers. When configured as dual 32-bit -timers, each half can operate in conjunction (chain mode) or independently -(unchained mode) of each other. - -The timer is a free running up-counter and can generate interrupts when the -counter reaches preset counter values. - -Also see ../watchdog/davinci-wdt.txt for timers that are configurable as -watchdog timers. - -Required properties: - -- compatible : should be "ti,da830-timer". -- reg : specifies base physical address and count of the registers. -- interrupts : interrupts generated by the timer. -- interrupt-names: should be "tint12", "tint34", "cmpint0", "cmpint1", - "cmpint2", "cmpint3", "cmpint4", "cmpint5", "cmpint6", - "cmpint7" ("cmpintX" may be omitted if not present in the - hardware). -- clocks : the clock feeding the timer clock. - -Example: - - clocksource: timer@20000 { - compatible = "ti,da830-timer"; - reg = <0x20000 0x1000>; - interrupts = <21>, <22>, <74>, <75>, <76>, <77>, <78>, <79>, - <80>, <81>; - interrupt-names = "tint12", "tint34", "cmpint0", "cmpint1", - "cmpint2", "cmpint3", "cmpint4", "cmpint5", - "cmpint6", "cmpint7"; - clocks = <&pll0_auxclk>; - }; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 8a9a00705b23..0108d7507215 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -33,7 +33,8 @@ properties: # Acbel fsg032 power supply - acbel,fsg032 # SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin - - ad,ad7414 + - ad,ad7414 # Deprecated, use adi,ad7414 + - adi,ad7414 # ADM9240: Complete System Hardware Monitor for uProcessor-Based Systems - ad,adm9240 # AD5110 - Nonvolatile Digital Potentiometer @@ -46,8 +47,6 @@ properties: - ams,iaq-core # Temperature monitoring of Astera Labs PT5161L PCIe retimer - asteralabs,pt5161l - # i2c serial eeprom (24cxx) - - at,24c08 # i2c h/w elliptic curve crypto module - atmel,atecc508a # ATSHA204 - i2c h/w symmetric crypto module @@ -70,14 +69,10 @@ properties: - dallas,ds1631 # Total-Elapsed-Time Recorder with Alarm - dallas,ds1682 - # Tiny Digital Thermometer and Thermostat - - dallas,ds1775 # CPU Peripheral Monitor - dallas,ds1780 # CPU Supervisor with Nonvolatile Memory and Programmable I/O - dallas,ds4510 - # Digital Thermometer and Thermostat - - dallas,ds75 # Delta AHE-50DC Open19 power shelf fan control module - delta,ahe50dc-fan # Delta Electronics DPS-650-AB power supply @@ -162,6 +157,8 @@ properties: - isil,isl29030 # Intersil ISL68137 Digital Output Configurable PWM Controller - isil,isl68137 + # Intersil ISL69260 PMBus Voltage Regulator + - isil,isl69260 # Intersil ISL69269 PMBus Voltage Regulator - isil,isl69269 # Intersil ISL76682 Ambient Light Sensor @@ -180,8 +177,6 @@ properties: - maxim,ds1803-100 # 10 kOhm digital potentiometer with I2C interface - maxim,ds3502 - # Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs - - maxim,max1237 # Temperature Sensor, I2C interface - maxim,max1619 # 3-Channel Remote Temperature Sensor @@ -196,8 +191,6 @@ properties: - maxim,max5484 # PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion - maxim,max6621 - # 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface - - maxim,max6625 # mCube 3-axis 8-bit digital accelerometer - mcube,mc3230 # Measurement Specialities I2C temperature and humidity sensor @@ -362,8 +355,6 @@ properties: - skyworks,sky81452 # SparkFun Qwiic Joystick (COM-15168) with i2c interface - sparkfun,qwiic-joystick - # i2c serial eeprom (24cxx) - - st,24c256 # Sierra Wireless mangOH Green SPI IoT interface - swir,mangoh-iotport-spi # Ambient Light Sensor with SMBUS/Two Wire Serial Interface @@ -395,8 +386,6 @@ properties: - ti,tmp121 - ti,tmp122 - ti,tmp125 - # Digital Temperature Sensor - - ti,tmp275 # TI DC-DC converter on PMBus - ti,tps40400 # TI Dual channel DCAP+ multiphase controller TPS53676 with AVSBus @@ -410,6 +399,7 @@ properties: - ti,tps544b25 - ti,tps544c20 - ti,tps544c25 + - ti,tps546d24 # I2C Touch-Screen Controller - ti,tsc2003 # Vicor Corporation Digital Supervisor diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt deleted file mode 100644 index aa10b8ec36e2..000000000000 --- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt +++ /dev/null @@ -1,24 +0,0 @@ -Texas Instruments DaVinci/Keystone Watchdog Timer (WDT) Controller - -Required properties: -- compatible : Should be "ti,davinci-wdt", "ti,keystone-wdt" -- reg : Should contain WDT registers location and length - -Optional properties: -- timeout-sec : Contains the watchdog timeout in seconds -- clocks : the clock feeding the watchdog timer. - Needed if platform uses clocks. - See clock-bindings.txt - -Documentation: -Davinci DM646x - https://www.ti.com/lit/ug/spruer5b/spruer5b.pdf -Keystone - https://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf - -Examples: - -wdt: wdt@2320000 { - compatible = "ti,davinci-wdt"; - reg = <0x02320000 0x80>; - timeout-sec = <30>; - clocks = <&clkwdtimer0>; -}; diff --git a/Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt b/Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt deleted file mode 100644 index 09f6b24969e0..000000000000 --- a/Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt +++ /dev/null @@ -1,19 +0,0 @@ -* NXP LPC18xx Watchdog Timer (WDT) - -Required properties: -- compatible: Should be "nxp,lpc1850-wwdt" -- reg: Should contain WDT registers location and length -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Should contain "wdtclk" and "reg"; the watchdog counter - clock and register interface clock respectively. -- interrupts: Should contain WDT interrupt - -Examples: - -watchdog@40080000 { - compatible = "nxp,lpc1850-wwdt"; - reg = <0x40080000 0x24>; - clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>; - clock-names = "wdtclk", "reg"; - interrupts = <49>; -}; diff --git a/Documentation/devicetree/bindings/watchdog/nxp,lpc1850-wwdt.yaml b/Documentation/devicetree/bindings/watchdog/nxp,lpc1850-wwdt.yaml new file mode 100644 index 000000000000..52878fdbe3ad --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/nxp,lpc1850-wwdt.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/nxp,lpc1850-wwdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC18xx Watchdog Timer (WDT) + +maintainers: + - Animesh Agarwal <animeshagarwal28@gmail.com> + +properties: + compatible: + const: nxp,lpc1850-wwdt + + reg: + maxItems: 1 + + clocks: + items: + - description: Watchdog counter clock + - description: Register interface clock + + clock-names: + items: + - const: wdtclk + - const: reg + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/lpc18xx-cgu.h> + #include <dt-bindings/clock/lpc18xx-ccu.h> + + watchdog@40080000 { + compatible = "nxp,lpc1850-wwdt"; + reg = <0x40080000 0x24>; + clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>; + clock-names = "wdtclk", "reg"; + interrupts = <49>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml index 47587971fb0b..932393f8c649 100644 --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml @@ -26,6 +26,7 @@ properties: - qcom,apss-wdt-msm8994 - qcom,apss-wdt-qcm2290 - qcom,apss-wdt-qcs404 + - qcom,apss-wdt-sa8255p - qcom,apss-wdt-sa8775p - qcom,apss-wdt-sc7180 - qcom,apss-wdt-sc7280 diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml index c7aab0418a32..b5a3dc377070 100644 --- a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml @@ -29,6 +29,7 @@ properties: - rockchip,rk3368-wdt - rockchip,rk3399-wdt - rockchip,rk3568-wdt + - rockchip,rk3576-wdt - rockchip,rk3588-wdt - rockchip,rv1108-wdt - const: snps,dw-wdt diff --git a/Documentation/devicetree/bindings/watchdog/ti,davinci-wdt.yaml b/Documentation/devicetree/bindings/watchdog/ti,davinci-wdt.yaml new file mode 100644 index 000000000000..3c78f60f5f48 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/ti,davinci-wdt.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/ti,davinci-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI DaVinci/Keystone Watchdog Timer Controller + +maintainers: + - Kousik Sanagavarapu <five231003@gmail.com> + +description: | + TI's Watchdog Timer Controller for DaVinci and Keystone Processors. + + Datasheets + + Davinci DM646x - https://www.ti.com/lit/ug/spruer5b/spruer5b.pdf + Keystone - https://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + oneOf: + - items: + - const: ti,keystone-wdt + - const: ti,davinci-wdt + - items: + - const: ti,davinci-wdt + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + wdt: watchdog@22f0080 { + compatible = "ti,keystone-wdt", "ti,davinci-wdt"; + reg = <0x022f0080 0x80>; + clocks = <&clkwdtimer0>; + }; + +... diff --git a/Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml b/Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml new file mode 100644 index 000000000000..9dbaa941538e --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/zii,rave-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zodiac RAVE Watchdog Timer + +maintainers: + - Martyn Welch <martyn.welch@collabora.co.uk> + - Guenter Roeck <linux@roeck-us.net> + - Wim Van Sebroeck <wim@iguana.be> + +properties: + compatible: + const: zii,rave-wdt + + reg: + maxItems: 1 + description: i2c slave address of device, usually 0x38 + + reset-duration-ms: + description: + Duration of the pulse generated when the watchdog times + out. + +required: + - compatible + - reg + +allOf: + - $ref: watchdog.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + timeout-sec = <30>; + reset-duration-ms = <30>; + }; + }; + diff --git a/Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt b/Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt deleted file mode 100644 index 3d878184ec3f..000000000000 --- a/Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt +++ /dev/null @@ -1,19 +0,0 @@ -Zodiac RAVE Watchdog Timer - -Required properties: -- compatible: must be "zii,rave-wdt" -- reg: i2c slave address of device, usually 0x38 - -Optional Properties: -- timeout-sec: Watchdog timeout value in seconds. -- reset-duration-ms: Duration of the pulse generated when the watchdog times - out. Value in milliseconds. - -Example: - - watchdog@38 { - compatible = "zii,rave-wdt"; - reg = <0x38>; - timeout-sec = <30>; - reset-duration-ms = <30>; - }; diff --git a/MAINTAINERS b/MAINTAINERS index e3a16e97ec44..f550e7b1f1cc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2477,6 +2477,7 @@ N: lpc18xx ARM/LPC32XX SOC SUPPORT M: Vladimir Zapolskiy <vz@mleia.com> +M: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained T: git git://github.com/vzapolskiy/linux-lpc32xx.git @@ -2489,6 +2490,14 @@ F: drivers/usb/host/ohci-nxp.c F: drivers/watchdog/pnx4008_wdt.c N: lpc32xx +LPC32XX DMAMUX SUPPORT +M: J.M.B. Downing <jonathan.downing@nautel.com> +M: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com> +R: Vladimir Zapolskiy <vz@mleia.com> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: Documentation/devicetree/bindings/dma/nxp,lpc3220-dmamux.yaml + ARM/Marvell Dove/MV78xx0/Orion SOC support M: Andrew Lunn <andrew@lunn.ch> M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> @@ -14296,8 +14305,8 @@ M: Sean Wang <sean.wang@mediatek.com> L: linux-bluetooth@vger.kernel.org L: linux-mediatek@lists.infradead.org (moderated for non-subscribers) S: Maintained +F: Documentation/devicetree/bindings/net/bluetooth/mediatek,bluetooth.txt F: Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml -F: Documentation/devicetree/bindings/net/mediatek-bluetooth.txt F: drivers/bluetooth/btmtkuart.c MEDIATEK BOARD LEVEL SHUTDOWN DRIVERS diff --git a/drivers/of/address.c b/drivers/of/address.c index d669ce25b5f9..286f0c161e33 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -8,6 +8,7 @@ #include <linux/logic_pio.h> #include <linux/module.h> #include <linux/of_address.h> +#include <linux/overflow.h> #include <linux/pci.h> #include <linux/pci_regs.h> #include <linux/sizes.h> @@ -197,6 +198,23 @@ static u64 of_bus_pci_map(__be32 *addr, const __be32 *range, int na, int ns, #endif /* CONFIG_PCI */ +static int __of_address_resource_bounds(struct resource *r, u64 start, u64 size) +{ + u64 end = start; + + if (overflows_type(start, r->start)) + return -EOVERFLOW; + if (size && check_add_overflow(end, size - 1, &end)) + return -EOVERFLOW; + if (overflows_type(end, r->end)) + return -EOVERFLOW; + + r->start = start; + r->end = end; + + return 0; +} + /* * of_pci_range_to_resource - Create a resource from an of_pci_range * @range: the PCI range that describes the resource @@ -215,6 +233,7 @@ static u64 of_bus_pci_map(__be32 *addr, const __be32 *range, int na, int ns, int of_pci_range_to_resource(struct of_pci_range *range, struct device_node *np, struct resource *res) { + u64 start; int err; res->flags = range->flags; res->parent = res->child = res->sibling = NULL; @@ -231,18 +250,11 @@ int of_pci_range_to_resource(struct of_pci_range *range, err = -EINVAL; goto invalid_range; } - res->start = port; + start = port; } else { - if ((sizeof(resource_size_t) < 8) && - upper_32_bits(range->cpu_addr)) { - err = -EINVAL; - goto invalid_range; - } - - res->start = range->cpu_addr; + start = range->cpu_addr; } - res->end = res->start + range->size - 1; - return 0; + return __of_address_resource_bounds(res, start, range->size); invalid_range: res->start = (resource_size_t)OF_BAD_ADDR; @@ -258,8 +270,8 @@ EXPORT_SYMBOL(of_pci_range_to_resource); * @res: pointer to a valid resource that will be updated to * reflect the values contained in the range. * - * Returns ENOENT if the entry is not found or EINVAL if the range cannot be - * converted to resource. + * Returns -ENOENT if the entry is not found or -EOVERFLOW if the range + * cannot be converted to resource. */ int of_range_to_resource(struct device_node *np, int index, struct resource *res) { @@ -1061,12 +1073,10 @@ static int __of_address_to_resource(struct device_node *dev, int index, int bar_ if (of_mmio_is_nonposted(dev)) flags |= IORESOURCE_MEM_NONPOSTED; - r->start = taddr; - r->end = taddr + size - 1; r->flags = flags; r->name = name ? name : dev->full_name; - return 0; + return __of_address_resource_bounds(r, taddr, size); } /** diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 8fd63100ba8f..a494f56a0d0e 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -357,8 +357,8 @@ int of_irq_parse_one(struct device_node *device, int index, struct of_phandle_ar addr = of_get_property(device, "reg", &addr_len); /* Prevent out-of-bounds read in case of longer interrupt parent address size */ - if (addr_len > (3 * sizeof(__be32))) - addr_len = 3 * sizeof(__be32); + if (addr_len > sizeof(addr_buf)) + addr_len = sizeof(addr_buf); if (addr) memcpy(addr_buf, addr, addr_len); @@ -429,9 +429,8 @@ int of_irq_to_resource(struct device_node *dev, int index, struct resource *r) of_property_read_string_index(dev, "interrupt-names", index, &name); - r->start = r->end = irq; - r->flags = IORESOURCE_IRQ | irqd_get_trigger_type(irq_get_irq_data(irq)); - r->name = name ? name : of_node_full_name(dev); + *r = DEFINE_RES_IRQ_NAMED(irq, name ?: of_node_full_name(dev)); + r->flags |= irq_get_trigger_type(irq); } return irq; @@ -716,8 +715,7 @@ struct irq_domain *of_msi_map_get_device_domain(struct device *dev, u32 id, * @np: device node for @dev * @token: bus type for this domain * - * Parse the msi-parent property (both the simple and the complex - * versions), and returns the corresponding MSI domain. + * Parse the msi-parent property and returns the corresponding MSI domain. * * Returns: the MSI domain for this device (or NULL on failure). */ @@ -725,33 +723,14 @@ struct irq_domain *of_msi_get_domain(struct device *dev, struct device_node *np, enum irq_domain_bus_token token) { - struct device_node *msi_np; + struct of_phandle_iterator it; struct irq_domain *d; + int err; - /* Check for a single msi-parent property */ - msi_np = of_parse_phandle(np, "msi-parent", 0); - if (msi_np && !of_property_read_bool(msi_np, "#msi-cells")) { - d = irq_find_matching_host(msi_np, token); - if (!d) - of_node_put(msi_np); - return d; - } - - if (token == DOMAIN_BUS_PLATFORM_MSI) { - /* Check for the complex msi-parent version */ - struct of_phandle_args args; - int index = 0; - - while (!of_parse_phandle_with_args(np, "msi-parent", - "#msi-cells", - index, &args)) { - d = irq_find_matching_host(args.np, token); - if (d) - return d; - - of_node_put(args.np); - index++; - } + of_for_each_phandle(&it, err, np, "msi-parent", "#msi-cells", 0) { + d = irq_find_matching_host(it.node, token); + if (d) + return d; } return NULL; diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c index 4d861a75d694..cbdecccca097 100644 --- a/drivers/of/overlay.c +++ b/drivers/of/overlay.c @@ -472,7 +472,6 @@ static int add_changeset_node(struct overlay_changeset *ovcs, static int build_changeset_next_level(struct overlay_changeset *ovcs, struct target *target, const struct device_node *overlay_node) { - struct device_node *child; struct property *prop; int ret; @@ -485,12 +484,11 @@ static int build_changeset_next_level(struct overlay_changeset *ovcs, } } - for_each_child_of_node(overlay_node, child) { + for_each_child_of_node_scoped(overlay_node, child) { ret = add_changeset_node(ovcs, target, child); if (ret) { pr_debug("Failed to apply node @%pOF/%pOFn, err=%d\n", target->np, child, ret); - of_node_put(child); return ret; } } @@ -1078,16 +1076,12 @@ EXPORT_SYMBOL_GPL(of_overlay_fdt_apply); */ static int find_node(struct device_node *tree, struct device_node *np) { - struct device_node *child; - if (tree == np) return 1; - for_each_child_of_node(tree, child) { - if (find_node(child, np)) { - of_node_put(child); + for_each_child_of_node_scoped(tree, child) { + if (find_node(child, np)) return 1; - } } return 0; diff --git a/drivers/of/platform.c b/drivers/of/platform.c index ef622d41eb5b..f416c008cec2 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -338,7 +338,6 @@ static int of_platform_bus_create(struct device_node *bus, struct device *parent, bool strict) { const struct of_dev_auxdata *auxdata; - struct device_node *child; struct platform_device *dev; const char *bus_id = NULL; void *platform_data = NULL; @@ -382,13 +381,11 @@ static int of_platform_bus_create(struct device_node *bus, if (!dev || !of_match_node(matches, bus)) return 0; - for_each_child_of_node(bus, child) { + for_each_child_of_node_scoped(bus, child) { pr_debug(" create child: %pOF\n", child); rc = of_platform_bus_create(child, matches, lookup, &dev->dev, strict); - if (rc) { - of_node_put(child); + if (rc) break; - } } of_node_set_flag(bus, OF_POPULATED_BUS); return rc; @@ -459,7 +456,6 @@ int of_platform_populate(struct device_node *root, const struct of_dev_auxdata *lookup, struct device *parent) { - struct device_node *child; int rc = 0; root = root ? of_node_get(root) : of_find_node_by_path("/"); @@ -470,12 +466,10 @@ int of_platform_populate(struct device_node *root, pr_debug(" starting at: %pOF\n", root); device_links_supplier_sync_state_pause(); - for_each_child_of_node(root, child) { + for_each_child_of_node_scoped(root, child) { rc = of_platform_bus_create(child, matches, lookup, parent, true); - if (rc) { - of_node_put(child); + if (rc) break; - } } device_links_supplier_sync_state_resume(); diff --git a/drivers/of/property.c b/drivers/of/property.c index 164d77cb9445..11b922fde7af 100644 --- a/drivers/of/property.c +++ b/drivers/of/property.c @@ -452,12 +452,17 @@ EXPORT_SYMBOL_GPL(of_property_read_string); /** * of_property_match_string() - Find string in a list and return index - * @np: pointer to node containing string list property + * @np: pointer to the node containing the string list property * @propname: string list property name - * @string: pointer to string to search for in string list + * @string: pointer to the string to search for in the string list * - * This function searches a string list property and returns the index - * of a specific string value. + * Search for an exact match of string in a device node property which is a + * string of lists. + * + * Return: the index of the first occurrence of the string on success, -EINVAL + * if the property does not exist, -ENODATA if the property does not have a + * value, and -EILSEQ if the string is not null-terminated within the length of + * the property data. */ int of_property_match_string(const struct device_node *np, const char *propname, const char *string) @@ -773,16 +778,11 @@ EXPORT_SYMBOL(of_graph_get_port_parent); struct device_node *of_graph_get_remote_port_parent( const struct device_node *node) { - struct device_node *np, *pp; - /* Get remote endpoint node. */ - np = of_graph_get_remote_endpoint(node); - - pp = of_graph_get_port_parent(np); + struct device_node *np __free(device_node) = + of_graph_get_remote_endpoint(node); - of_node_put(np); - - return pp; + return of_graph_get_port_parent(np); } EXPORT_SYMBOL(of_graph_get_remote_port_parent); @@ -1064,19 +1064,15 @@ static void of_link_to_phandle(struct device_node *con_np, struct device_node *sup_np, u8 flags) { - struct device_node *tmp_np = of_node_get(sup_np); + struct device_node *tmp_np __free(device_node) = of_node_get(sup_np); /* Check that sup_np and its ancestors are available. */ while (tmp_np) { - if (of_fwnode_handle(tmp_np)->dev) { - of_node_put(tmp_np); + if (of_fwnode_handle(tmp_np)->dev) break; - } - if (!of_device_is_available(tmp_np)) { - of_node_put(tmp_np); + if (!of_device_is_available(tmp_np)) return; - } tmp_np = of_get_next_parent(tmp_np); } @@ -1440,16 +1436,13 @@ static int of_link_property(struct device_node *con_np, const char *prop_name) } while ((phandle = s->parse_prop(con_np, prop_name, i))) { - struct device_node *con_dev_np; + struct device_node *con_dev_np __free(device_node) = + s->get_con_dev ? s->get_con_dev(con_np) : of_node_get(con_np); - con_dev_np = s->get_con_dev - ? s->get_con_dev(con_np) - : of_node_get(con_np); matched = true; i++; of_link_to_phandle(con_dev_np, phandle, s->fwlink_flags); of_node_put(phandle); - of_node_put(con_dev_np); } s++; } diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c index 2780928764a4..5cf96776dd7d 100644 --- a/drivers/of/resolver.c +++ b/drivers/of/resolver.c @@ -150,7 +150,7 @@ static int node_name_cmp(const struct device_node *dn1, static int adjust_local_phandle_references(struct device_node *local_fixups, struct device_node *overlay, int phandle_delta) { - struct device_node *child, *overlay_child; + struct device_node *overlay_child; struct property *prop_fix, *prop; int err, i, count; unsigned int off; @@ -194,7 +194,7 @@ static int adjust_local_phandle_references(struct device_node *local_fixups, * The roots of the subtrees are the overlay's __local_fixups__ node * and the overlay's root node. */ - for_each_child_of_node(local_fixups, child) { + for_each_child_of_node_scoped(local_fixups, child) { for_each_child_of_node(overlay, overlay_child) if (!node_name_cmp(child, overlay_child)) { @@ -202,17 +202,13 @@ static int adjust_local_phandle_references(struct device_node *local_fixups, break; } - if (!overlay_child) { - of_node_put(child); + if (!overlay_child) return -EINVAL; - } err = adjust_local_phandle_references(child, overlay_child, phandle_delta); - if (err) { - of_node_put(child); + if (err) return err; - } } return 0; diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c index c830f346df45..b60b4b7d7172 100644 --- a/drivers/of/unittest.c +++ b/drivers/of/unittest.c @@ -900,8 +900,8 @@ static void __init of_unittest_changeset(void) unittest(!of_find_node_by_path("/testcase-data/changeset/n2/n21"), "'%pOF' still present after revert\n", n21); - ppremove = of_find_property(parent, "prop-remove", NULL); - unittest(ppremove, "failed to find removed prop after revert\n"); + unittest(of_property_present(parent, "prop-remove"), + "failed to find removed prop after revert\n"); ret = of_property_read_string(parent, "prop-update", &propstr); unittest(!ret, "failed to find updated prop after revert\n"); diff --git a/include/dt-bindings/interrupt-controller/arm-gic.h b/include/dt-bindings/interrupt-controller/arm-gic.h index 35b6f69b7db6..887f53363e8a 100644 --- a/include/dt-bindings/interrupt-controller/arm-gic.h +++ b/include/dt-bindings/interrupt-controller/arm-gic.h @@ -12,6 +12,8 @@ #define GIC_SPI 0 #define GIC_PPI 1 +#define GIC_ESPI 2 +#define GIC_EPPI 3 /* * Interrupt specifier cell 2. diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c index 10fb63894369..6e06aeab5503 100644 --- a/scripts/dtc/checks.c +++ b/scripts/dtc/checks.c @@ -1826,10 +1826,14 @@ static void check_graph_port(struct check *c, struct dt_info *dti, if (node->bus != &graph_port_bus) return; + check_graph_reg(c, dti, node); + + /* skip checks below for overlays */ + if (dti->dtsflags & DTSF_PLUGIN) + return; + if (!strprefixeq(node->name, node->basenamelen, "port")) FAIL(c, dti, node, "graph port node name should be 'port'"); - - check_graph_reg(c, dti, node); } WARNING(graph_port, check_graph_port, NULL, &graph_nodes); @@ -1864,11 +1868,15 @@ static void check_graph_endpoint(struct check *c, struct dt_info *dti, if (!node->parent || node->parent->bus != &graph_port_bus) return; + check_graph_reg(c, dti, node); + + /* skip checks below for overlays */ + if (dti->dtsflags & DTSF_PLUGIN) + return; + if (!strprefixeq(node->name, node->basenamelen, "endpoint")) FAIL(c, dti, node, "graph endpoint node name should be 'endpoint'"); - check_graph_reg(c, dti, node); - remote_node = get_remote_endpoint(c, dti, node); if (!remote_node) return; diff --git a/scripts/dtc/dt-extract-compatibles b/scripts/dtc/dt-extract-compatibles index 5ffb2364409b..6570efabaa64 100755 --- a/scripts/dtc/dt-extract-compatibles +++ b/scripts/dtc/dt-extract-compatibles @@ -46,6 +46,15 @@ def parse_of_match_table(data): return match_table_list +def parse_of_functions(data, func_name): + """ Find all compatibles in the last argument of a given function """ + compat_list = [] + for m in re.finditer(rf'{func_name}\(([a-zA-Z0-9_>\(\)"\-]+,\s)*"([a-zA-Z0-9_,-]+)"\)', data): + compat_list.append(m[2]) + + return compat_list + + def parse_compatibles(file, compat_ignore_list): with open(file, 'r', encoding='utf-8') as f: data = f.read().replace('\n', '') @@ -60,6 +69,10 @@ def parse_compatibles(file, compat_ignore_list): else: compat_list = parse_of_declare_macros(data) compat_list += parse_of_device_id(data) + compat_list += parse_of_functions(data, "_is_compatible") + compat_list += parse_of_functions(data, "of_find_compatible_node") + compat_list += parse_of_functions(data, "for_each_compatible_node") + compat_list += parse_of_functions(data, "of_get_compatible_child") return compat_list diff --git a/scripts/dtc/fdtoverlay.c b/scripts/dtc/fdtoverlay.c index 4eba0460f240..699b4f616502 100644 --- a/scripts/dtc/fdtoverlay.c +++ b/scripts/dtc/fdtoverlay.c @@ -48,7 +48,7 @@ static void *apply_one(char *base, const char *overlay, size_t *buf_len, int ret; /* - * We take a copies first, because a failed apply can trash + * We take copies first, because a failed apply can trash * both the base blob and the overlay */ tmpo = xmalloc(fdt_totalsize(overlay)); diff --git a/scripts/dtc/version_gen.h b/scripts/dtc/version_gen.h index 4c5e17639d2b..bf81ce593685 100644 --- a/scripts/dtc/version_gen.h +++ b/scripts/dtc/version_gen.h @@ -1 +1 @@ -#define DTC_VERSION "DTC 1.7.0-g1df7b047" +#define DTC_VERSION "DTC 1.7.0-gbcd02b52" diff --git a/tools/testing/selftests/dt/test_unprobed_devices.sh b/tools/testing/selftests/dt/test_unprobed_devices.sh index 2d7e70c5ad2d..5e3f42ef249e 100755 --- a/tools/testing/selftests/dt/test_unprobed_devices.sh +++ b/tools/testing/selftests/dt/test_unprobed_devices.sh @@ -34,8 +34,21 @@ nodes_compatible=$( # Check if node is available if [[ -e "${node}"/status ]]; then status=$(tr -d '\000' < "${node}"/status) - [[ "${status}" != "okay" && "${status}" != "ok" ]] && continue + if [[ "${status}" != "okay" && "${status}" != "ok" ]]; then + if [ -n "${disabled_nodes_regex}" ]; then + disabled_nodes_regex="${disabled_nodes_regex}|${node}" + else + disabled_nodes_regex="${node}" + fi + continue + fi fi + + # Ignore this node if one of its ancestors was disabled + if [ -n "${disabled_nodes_regex}" ]; then + echo "${node}" | grep -q -E "${disabled_nodes_regex}" && continue + fi + echo "${node}" | sed -e 's|\/proc\/device-tree||' done | sort ) |