diff options
| -rw-r--r-- | drivers/net/wireless/ath/regd.c | 10 | ||||
| -rw-r--r-- | include/net/cfg80211.h | 14 | ||||
| -rw-r--r-- | net/wireless/reg.c | 201 |
3 files changed, 175 insertions, 50 deletions
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c index fdf07c822081..7a89f9fac7d4 100644 --- a/drivers/net/wireless/ath/regd.c +++ b/drivers/net/wireless/ath/regd.c @@ -200,8 +200,10 @@ ath_reg_apply_beaconing_flags(struct wiphy *wiphy, continue; if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { - r = freq_reg_info(wiphy, ch->center_freq, - &bandwidth, ®_rule); + r = freq_reg_info(wiphy, + ch->center_freq, + bandwidth, + ®_rule); if (r) continue; /* @@ -265,7 +267,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy, */ ch = &sband->channels[11]; /* CH 12 */ - r = freq_reg_info(wiphy, ch->center_freq, &bandwidth, ®_rule); + r = freq_reg_info(wiphy, ch->center_freq, bandwidth, ®_rule); if (!r) { if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN)) if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN) @@ -273,7 +275,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy, } ch = &sband->channels[12]; /* CH 13 */ - r = freq_reg_info(wiphy, ch->center_freq, &bandwidth, ®_rule); + r = freq_reg_info(wiphy, ch->center_freq, bandwidth, ®_rule); if (!r) { if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN)) if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 9e17a83d3432..282d58d52fce 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -70,6 +70,9 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_NO_FAT_BELOW = 1<<5, }; +#define IEEE80211_CHAN_NO_HT40 \ + (IEEE80211_CHAN_NO_FAT_ABOVE | IEEE80211_CHAN_NO_FAT_BELOW) + /** * struct ieee80211_channel - channel definition * @@ -1303,9 +1306,10 @@ extern void wiphy_apply_custom_regulatory( * freq_reg_info - get regulatory information for the given frequency * @wiphy: the wiphy for which we want to process this rule for * @center_freq: Frequency in KHz for which we want regulatory information for - * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one - * you can set this to 0. If this frequency is allowed we then set - * this value to the maximum allowed bandwidth. + * @desired_bw_khz: the desired max bandwidth you want to use per + * channel. Note that this is still 20 MHz if you want to use HT40 + * as HT40 makes use of two channels for its 40 MHz width bandwidth. + * If set to 0 we'll assume you want the standard 20 MHz. * @reg_rule: the regulatory rule which we have for this frequency * * Use this function to get the regulatory rule for a specific frequency on @@ -1320,7 +1324,9 @@ extern void wiphy_apply_custom_regulatory( * freq_in_rule_band() for our current definition of a band -- this is purely * subjective and right now its 802.11 specific. */ -extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth, +extern int freq_reg_info(struct wiphy *wiphy, + u32 center_freq, + u32 desired_bw_khz, const struct ieee80211_reg_rule **reg_rule); /* diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 537af62ec42b..d897528ee7fc 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -48,12 +48,6 @@ static struct regulatory_request *last_request; /* To trigger userspace events */ static struct platform_device *reg_pdev; -/* Keep the ordering from large to small */ -static u32 supported_bandwidths[] = { - MHZ_TO_KHZ(40), - MHZ_TO_KHZ(20), -}; - /* * Central wireless core regulatory domains, we only need two, * the current one and a world regulatory domain in case we have no @@ -435,19 +429,20 @@ static bool is_valid_rd(const struct ieee80211_regdomain *rd) return true; } -/* Returns value in KHz */ -static u32 freq_max_bandwidth(const struct ieee80211_freq_range *freq_range, - u32 freq) +static bool reg_does_bw_fit(const struct ieee80211_freq_range *freq_range, + u32 center_freq_khz, + u32 bw_khz) { - unsigned int i; - for (i = 0; i < ARRAY_SIZE(supported_bandwidths); i++) { - u32 start_freq_khz = freq - supported_bandwidths[i]/2; - u32 end_freq_khz = freq + supported_bandwidths[i]/2; - if (start_freq_khz >= freq_range->start_freq_khz && - end_freq_khz <= freq_range->end_freq_khz) - return supported_bandwidths[i]; - } - return 0; + u32 start_freq_khz, end_freq_khz; + + start_freq_khz = center_freq_khz - (bw_khz/2); + end_freq_khz = center_freq_khz + (bw_khz/2); + + if (start_freq_khz >= freq_range->start_freq_khz && + end_freq_khz <= freq_range->end_freq_khz) + return true; + + return false; } /** @@ -847,14 +842,17 @@ static u32 map_regdom_flags(u32 rd_flags) static int freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq, - u32 *bandwidth, + u32 desired_bw_khz, const struct ieee80211_reg_rule **reg_rule, const struct ieee80211_regdomain *custom_regd) { int i; bool band_rule_found = false; const struct ieee80211_regdomain *regd; - u32 max_bandwidth = 0; + bool bw_fits = false; + + if (!desired_bw_khz) + desired_bw_khz = MHZ_TO_KHZ(20); regd = custom_regd ? custom_regd : cfg80211_regdomain; @@ -887,38 +885,54 @@ static int freq_reg_info_regd(struct wiphy *wiphy, if (!band_rule_found) band_rule_found = freq_in_rule_band(fr, center_freq); - max_bandwidth = freq_max_bandwidth(fr, center_freq); + bw_fits = reg_does_bw_fit(fr, + center_freq, + desired_bw_khz); - if (max_bandwidth && *bandwidth <= max_bandwidth) { + if (band_rule_found && bw_fits) { *reg_rule = rr; - *bandwidth = max_bandwidth; - break; + return 0; } } if (!band_rule_found) return -ERANGE; - return !max_bandwidth; + return -EINVAL; } EXPORT_SYMBOL(freq_reg_info); -int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth, - const struct ieee80211_reg_rule **reg_rule) +int freq_reg_info(struct wiphy *wiphy, + u32 center_freq, + u32 desired_bw_khz, + const struct ieee80211_reg_rule **reg_rule) { assert_cfg80211_lock(); - return freq_reg_info_regd(wiphy, center_freq, - bandwidth, reg_rule, NULL); + return freq_reg_info_regd(wiphy, + center_freq, + desired_bw_khz, + reg_rule, + NULL); } +/* + * Note that right now we assume the desired channel bandwidth + * is always 20 MHz for each individual channel (HT40 uses 20 MHz + * per channel, the primary and the extension channel). To support + * smaller custom bandwidths such as 5 MHz or 10 MHz we'll need a + * new ieee80211_channel.target_bw and re run the regulatory check + * on the wiphy with the target_bw specified. Then we can simply use + * that below for the desired_bw_khz below. + */ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band, unsigned int chan_idx) { int r; - u32 flags; - u32 max_bandwidth = 0; + u32 flags, bw_flags = 0; + u32 desired_bw_khz = MHZ_TO_KHZ(20); const struct ieee80211_reg_rule *reg_rule = NULL; const struct ieee80211_power_rule *power_rule = NULL; + const struct ieee80211_freq_range *freq_range = NULL; struct ieee80211_supported_band *sband; struct ieee80211_channel *chan; struct wiphy *request_wiphy = NULL; @@ -933,8 +947,10 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band, flags = chan->orig_flags; - r = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq), - &max_bandwidth, ®_rule); + r = freq_reg_info(wiphy, + MHZ_TO_KHZ(chan->center_freq), + desired_bw_khz, + ®_rule); if (r) { /* @@ -977,6 +993,10 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band, } power_rule = ®_rule->power_rule; + freq_range = ®_rule->freq_range; + + if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40)) + bw_flags = IEEE80211_CHAN_NO_HT40; if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER && request_wiphy && request_wiphy == wiphy && @@ -987,19 +1007,19 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band, * settings */ chan->flags = chan->orig_flags = - map_regdom_flags(reg_rule->flags); + map_regdom_flags(reg_rule->flags) | bw_flags; chan->max_antenna_gain = chan->orig_mag = (int) MBI_TO_DBI(power_rule->max_antenna_gain); - chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth); + chan->max_bandwidth = KHZ_TO_MHZ(desired_bw_khz); chan->max_power = chan->orig_mpwr = (int) MBM_TO_DBM(power_rule->max_eirp); return; } - chan->flags = flags | map_regdom_flags(reg_rule->flags); + chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags); chan->max_antenna_gain = min(chan->orig_mag, (int) MBI_TO_DBI(power_rule->max_antenna_gain)); - chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth); + chan->max_bandwidth = KHZ_TO_MHZ(desired_bw_khz); if (chan->orig_mpwr) chan->max_power = min(chan->orig_mpwr, (int) MBM_TO_DBM(power_rule->max_eirp)); @@ -1156,6 +1176,93 @@ static void reg_process_beacons(struct wiphy *wiphy) wiphy_update_beacon_reg(wiphy); } +static bool is_ht40_not_allowed(struct ieee80211_channel *chan) +{ + if (!chan) + return true; + if (chan->flags & IEEE80211_CHAN_DISABLED) + return true; + /* This would happen when regulatory rules disallow HT40 completely */ + if (IEEE80211_CHAN_NO_HT40 == (chan->flags & (IEEE80211_CHAN_NO_HT40))) + return true; + return false; +} + +static void reg_process_ht_flags_channel(struct wiphy *wiphy, + enum ieee80211_band band, + unsigned int chan_idx) +{ + struct ieee80211_supported_band *sband; + struct ieee80211_channel *channel; + struct ieee80211_channel *channel_before = NULL, *channel_after = NULL; + unsigned int i; + + assert_cfg80211_lock(); + + sband = wiphy->bands[band]; + BUG_ON(chan_idx >= sband->n_channels); + channel = &sband->channels[chan_idx]; + + if (is_ht40_not_allowed(channel)) { + channel->flags |= IEEE80211_CHAN_NO_HT40; + return; + } + + /* + * We need to ensure the extension channels exist to + * be able to use HT40- or HT40+, this finds them (or not) + */ + for (i = 0; i < sband->n_channels; i++) { + struct ieee80211_channel *c = &sband->channels[i]; + if (c->center_freq == (channel->center_freq - 20)) + channel_before = c; + if (c->center_freq == (channel->center_freq + 20)) + channel_after = c; + } + + /* + * Please note that this assumes target bandwidth is 20 MHz, + * if that ever changes we also need to change the below logic + * to include that as well. + */ + if (is_ht40_not_allowed(channel_before)) + channel->flags |= IEEE80211_CHAN_NO_FAT_BELOW; + else + channel->flags &= ~IEEE80211_CHAN_NO_FAT_BELOW; + + if (is_ht40_not_allowed(channel_after)) + channel->flags |= IEEE80211_CHAN_NO_FAT_ABOVE; + else + channel->flags &= ~IEEE80211_CHAN_NO_FAT_ABOVE; +} + +static void reg_process_ht_flags_band(struct wiphy *wiphy, + enum ieee80211_band band) +{ + unsigned int i; + struct ieee80211_supported_band *sband; + + BUG_ON(!wiphy->bands[band]); + sband = wiphy->bands[band]; + + for (i = 0; i < sband->n_channels; i++) + reg_process_ht_flags_channel(wiphy, band, i); +} + +static void reg_process_ht_flags(struct wiphy *wiphy) +{ + enum ieee80211_band band; + + if (!wiphy) + return; + + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + if (wiphy->bands[band]) + reg_process_ht_flags_band(wiphy, band); + } + +} + void wiphy_update_regulatory(struct wiphy *wiphy, enum nl80211_reg_initiator initiator) { @@ -1169,6 +1276,7 @@ void wiphy_update_regulatory(struct wiphy *wiphy, } out: reg_process_beacons(wiphy); + reg_process_ht_flags(wiphy); if (wiphy->reg_notifier) wiphy->reg_notifier(wiphy, last_request); } @@ -1179,9 +1287,11 @@ static void handle_channel_custom(struct wiphy *wiphy, const struct ieee80211_regdomain *regd) { int r; - u32 max_bandwidth = 0; + u32 desired_bw_khz = MHZ_TO_KHZ(20); + u32 bw_flags = 0; const struct ieee80211_reg_rule *reg_rule = NULL; const struct ieee80211_power_rule *power_rule = NULL; + const struct ieee80211_freq_range *freq_range = NULL; struct ieee80211_supported_band *sband; struct ieee80211_channel *chan; @@ -1191,8 +1301,11 @@ static void handle_channel_custom(struct wiphy *wiphy, BUG_ON(chan_idx >= sband->n_channels); chan = &sband->channels[chan_idx]; - r = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq), - &max_bandwidth, ®_rule, regd); + r = freq_reg_info_regd(wiphy, + MHZ_TO_KHZ(chan->center_freq), + desired_bw_khz, + ®_rule, + regd); if (r) { chan->flags = IEEE80211_CHAN_DISABLED; @@ -1200,10 +1313,14 @@ static void handle_channel_custom(struct wiphy *wiphy, } power_rule = ®_rule->power_rule; + freq_range = ®_rule->freq_range; + + if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40)) + bw_flags = IEEE80211_CHAN_NO_HT40; - chan->flags |= map_regdom_flags(reg_rule->flags); + chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags; chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain); - chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth); + chan->max_bandwidth = KHZ_TO_MHZ(desired_bw_khz); chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp); } |