diff options
| -rw-r--r-- | drivers/spi/spi-bcm2835.c | 14 |
1 files changed, 12 insertions, 2 deletions
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index 840b1b8ff3dc..dfdcebb38830 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -319,6 +319,13 @@ static void bcm2835_spi_reset_hw(struct spi_controller *ctlr) BCM2835_SPI_CS_INTD | BCM2835_SPI_CS_DMAEN | BCM2835_SPI_CS_TA); + /* + * Transmission sometimes breaks unless the DONE bit is written at the + * end of every transfer. The spec says it's a RO bit. Either the + * spec is wrong and the bit is actually of type RW1C, or it's a + * hardware erratum. + */ + cs |= BCM2835_SPI_CS_DONE; /* and reset RX/TX FIFOS */ cs |= BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX; @@ -477,7 +484,9 @@ static void bcm2835_spi_transfer_prologue(struct spi_controller *ctlr, bcm2835_wr_fifo_count(bs, bs->rx_prologue); bcm2835_wait_tx_fifo_empty(bs); bcm2835_rd_fifo_count(bs, bs->rx_prologue); - bcm2835_spi_reset_hw(ctlr); + bcm2835_wr(bs, BCM2835_SPI_CS, cs | BCM2835_SPI_CS_CLEAR_RX + | BCM2835_SPI_CS_CLEAR_TX + | BCM2835_SPI_CS_DONE); dma_sync_single_for_device(ctlr->dma_rx->device->dev, sg_dma_address(&tfr->rx_sg.sgl[0]), @@ -498,7 +507,8 @@ static void bcm2835_spi_transfer_prologue(struct spi_controller *ctlr, | BCM2835_SPI_CS_DMAEN); bcm2835_wr_fifo_count(bs, tx_remaining); bcm2835_wait_tx_fifo_empty(bs); - bcm2835_wr(bs, BCM2835_SPI_CS, cs | BCM2835_SPI_CS_CLEAR_TX); + bcm2835_wr(bs, BCM2835_SPI_CS, cs | BCM2835_SPI_CS_CLEAR_TX + | BCM2835_SPI_CS_DONE); } if (likely(!bs->tx_spillover)) { |