diff options
| -rw-r--r-- | drivers/mfd/ab8500-gpadc.c | 70 |
1 files changed, 64 insertions, 6 deletions
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index 61b176fc457b..580f1008d67a 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -12,6 +12,7 @@ #include <linux/interrupt.h> #include <linux/spinlock.h> #include <linux/delay.h> +#include <linux/pm_runtime.h> #include <linux/platform_device.h> #include <linux/completion.h> #include <linux/regulator/consumer.h> @@ -82,6 +83,9 @@ /* This is used to not lose precision when dividing to get gain and offset */ #define CALIB_SCALE 1000 +/* Time in ms before disabling regulator */ +#define GPADC_AUDOSUSPEND_DELAY 1 + enum cal_channels { ADC_INPUT_VMAIN = 0, ADC_INPUT_BTEMP, @@ -282,8 +286,9 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) return -ENODEV; mutex_lock(&gpadc->ab8500_gpadc_lock); + /* Enable VTVout LDO this is required for GPADC */ - regulator_enable(gpadc->regu); + pm_runtime_get_sync(gpadc->dev); /* Check if ADC is not busy, lock and proceed */ do { @@ -397,8 +402,10 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) dev_err(gpadc->dev, "gpadc_conversion: disable gpadc failed\n"); goto out; } - /* Disable VTVout LDO this is required for GPADC */ - regulator_disable(gpadc->regu); + + pm_runtime_mark_last_busy(gpadc->dev); + pm_runtime_put_autosuspend(gpadc->dev); + mutex_unlock(&gpadc->ab8500_gpadc_lock); return (high_data << 8) | low_data; @@ -412,7 +419,9 @@ out: */ (void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC, AB8500_GPADC_CTRL1_REG, DIS_GPADC); - regulator_disable(gpadc->regu); + + pm_runtime_put(gpadc->dev); + mutex_unlock(&gpadc->ab8500_gpadc_lock); dev_err(gpadc->dev, "gpadc_conversion: Failed to AD convert channel %d\n", channel); @@ -571,6 +580,30 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) gpadc->cal_data[ADC_INPUT_VBAT].offset); } +static int ab8500_gpadc_runtime_suspend(struct device *dev) +{ + struct ab8500_gpadc *gpadc = dev_get_drvdata(dev); + + regulator_disable(gpadc->regu); + return 0; +} + +static int ab8500_gpadc_runtime_resume(struct device *dev) +{ + struct ab8500_gpadc *gpadc = dev_get_drvdata(dev); + + regulator_enable(gpadc->regu); + return 0; +} + +static int ab8500_gpadc_runtime_idle(struct device *dev) +{ + struct ab8500_gpadc *gpadc = dev_get_drvdata(dev); + + pm_runtime_suspend(dev); + return 0; +} + static int ab8500_gpadc_probe(struct platform_device *pdev) { int ret = 0; @@ -615,6 +648,16 @@ static int ab8500_gpadc_probe(struct platform_device *pdev) dev_err(gpadc->dev, "failed to get vtvout LDO\n"); goto fail_irq; } + + platform_set_drvdata(pdev, gpadc); + + regulator_enable(gpadc->regu); + + pm_runtime_set_autosuspend_delay(gpadc->dev, GPADC_AUDOSUSPEND_DELAY); + pm_runtime_use_autosuspend(gpadc->dev); + pm_runtime_set_active(gpadc->dev); + pm_runtime_enable(gpadc->dev); + ab8500_gpadc_read_calibration_data(gpadc); list_add_tail(&gpadc->node, &ab8500_gpadc_list); dev_dbg(gpadc->dev, "probe success\n"); @@ -635,19 +678,34 @@ static int ab8500_gpadc_remove(struct platform_device *pdev) list_del(&gpadc->node); /* remove interrupt - completion of Sw ADC conversion */ free_irq(gpadc->irq, gpadc); - /* disable VTVout LDO that is being used by GPADC */ - regulator_put(gpadc->regu); + + pm_runtime_get_sync(gpadc->dev); + pm_runtime_disable(gpadc->dev); + + regulator_disable(gpadc->regu); + + pm_runtime_set_suspended(gpadc->dev); + + pm_runtime_put_noidle(gpadc->dev); + kfree(gpadc); gpadc = NULL; return 0; } +static const struct dev_pm_ops ab8500_gpadc_pm_ops = { + SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend, + ab8500_gpadc_runtime_resume, + ab8500_gpadc_runtime_idle) +}; + static struct platform_driver ab8500_gpadc_driver = { .probe = ab8500_gpadc_probe, .remove = ab8500_gpadc_remove, .driver = { .name = "ab8500-gpadc", .owner = THIS_MODULE, + .pm = &ab8500_gpadc_pm_ops, }, }; |