diff options
40 files changed, 357 insertions, 144 deletions
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 32509b98142e..92b49bc37939 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -149,6 +149,17 @@ properties: maxItems: 6 $ref: /schemas/types.yaml#/definitions/uint32-array + sink-vdos-v1: + description: An array of u32 with each entry, a Vendor Defined Message Object (VDO), + providing additional information corresponding to the product, the detailed bit + definitions and the order of each VDO can be found in + "USB Power Delivery Specification Revision 2.0, Version 1.3" chapter 6.4.4.3.1 Discover + Identity. User can specify the VDO array via VDO_IDH/_CERT/_PRODUCT/_CABLE/_AMA defined in + dt-bindings/usb/pd.h. + minItems: 3 + maxItems: 6 + $ref: /schemas/types.yaml#/definitions/uint32-array + op-sink-microwatt: description: Sink required operating power in microwatt, if source can't offer the power, Capability Mismatch is set. Required for power sink and @@ -207,6 +218,10 @@ properties: SNK_READY for non-pd link. type: boolean +dependencies: + sink-vdos-v1: [ 'sink-vdos' ] + sink-vdos: [ 'sink-vdos-v1' ] + required: - compatible diff --git a/MAINTAINERS b/MAINTAINERS index b706dd20ff2b..bc0ceef87b73 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18873,6 +18873,13 @@ S: Maintained F: drivers/usb/host/isp116x* F: include/linux/usb/isp116x.h +USB ISP1760 DRIVER +M: Rui Miguel Silva <rui.silva@linaro.org> +L: linux-usb@vger.kernel.org +S: Maintained +F: drivers/usb/isp1760/* +F: Documentation/devicetree/bindings/usb/nxp,isp1760.yaml + USB LAN78XX ETHERNET DRIVER M: Woojung Huh <woojung.huh@microchip.com> M: UNGLinuxDriver@microchip.com diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c index a8b7b50abf64..5281f8d3fb3d 100644 --- a/drivers/usb/cdns3/cdns3-gadget.c +++ b/drivers/usb/cdns3/cdns3-gadget.c @@ -2007,7 +2007,7 @@ static void cdns3_configure_dmult(struct cdns3_device *priv_dev, else mask = BIT(priv_ep->num); - if (priv_ep->type != USB_ENDPOINT_XFER_ISOC) { + if (priv_ep->type != USB_ENDPOINT_XFER_ISOC && !priv_ep->dir) { cdns3_set_register_bit(®s->tdl_from_trb, mask); cdns3_set_register_bit(®s->tdl_beh, mask); cdns3_set_register_bit(®s->tdl_beh2, mask); @@ -2046,15 +2046,13 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) case USB_ENDPOINT_XFER_INT: ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_INT); - if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) || - priv_dev->dev_ver > DEV_VER_V2) + if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir) ep_cfg |= EP_CFG_TDL_CHK; break; case USB_ENDPOINT_XFER_BULK: ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_BULK); - if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) || - priv_dev->dev_ver > DEV_VER_V2) + if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir) ep_cfg |= EP_CFG_TDL_CHK; break; default: diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c index 5f0513c96c04..68972746e363 100644 --- a/drivers/usb/cdns3/cdnsp-ring.c +++ b/drivers/usb/cdns3/cdnsp-ring.c @@ -1517,13 +1517,14 @@ irqreturn_t cdnsp_thread_irq_handler(int irq, void *data) { struct cdnsp_device *pdev = (struct cdnsp_device *)data; union cdnsp_trb *event_ring_deq; + unsigned long flags; int counter = 0; - spin_lock(&pdev->lock); + spin_lock_irqsave(&pdev->lock, flags); if (pdev->cdnsp_state & (CDNSP_STATE_HALTED | CDNSP_STATE_DYING)) { cdnsp_died(pdev); - spin_unlock(&pdev->lock); + spin_unlock_irqrestore(&pdev->lock, flags); return IRQ_HANDLED; } @@ -1539,7 +1540,7 @@ irqreturn_t cdnsp_thread_irq_handler(int irq, void *data) cdnsp_update_erst_dequeue(pdev, event_ring_deq, 1); - spin_unlock(&pdev->lock); + spin_unlock_irqrestore(&pdev->lock, flags); return IRQ_HANDLED; } diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index b6e53d8212cd..21129d357f29 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1690,11 +1690,6 @@ static int dwc3_remove(struct platform_device *pdev) return 0; } -static void dwc3_shutdown(struct platform_device *pdev) -{ - dwc3_remove(pdev); -} - #ifdef CONFIG_PM static int dwc3_core_init_for_resume(struct dwc3 *dwc) { @@ -2012,7 +2007,6 @@ MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match); static struct platform_driver dwc3_driver = { .probe = dwc3_probe, .remove = dwc3_remove, - .shutdown = dwc3_shutdown, .driver = { .name = "dwc3", .of_match_table = of_match_ptr(of_dwc3_match), diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h index d0ac89c5b317..d223c54115f4 100644 --- a/drivers/usb/dwc3/debug.h +++ b/drivers/usb/dwc3/debug.h @@ -413,9 +413,12 @@ static inline const char *dwc3_gadget_generic_cmd_status_string(int status) #ifdef CONFIG_DEBUG_FS +extern void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep); extern void dwc3_debugfs_init(struct dwc3 *d); extern void dwc3_debugfs_exit(struct dwc3 *d); #else +static inline void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep) +{ } static inline void dwc3_debugfs_init(struct dwc3 *d) { } static inline void dwc3_debugfs_exit(struct dwc3 *d) diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c index 7146ee2ac057..5dbbe53269d3 100644 --- a/drivers/usb/dwc3/debugfs.c +++ b/drivers/usb/dwc3/debugfs.c @@ -886,30 +886,14 @@ static void dwc3_debugfs_create_endpoint_files(struct dwc3_ep *dep, } } -static void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep, - struct dentry *parent) +void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep) { struct dentry *dir; - dir = debugfs_create_dir(dep->name, parent); + dir = debugfs_create_dir(dep->name, dep->dwc->root); dwc3_debugfs_create_endpoint_files(dep, dir); } -static void dwc3_debugfs_create_endpoint_dirs(struct dwc3 *dwc, - struct dentry *parent) -{ - int i; - - for (i = 0; i < dwc->num_eps; i++) { - struct dwc3_ep *dep = dwc->eps[i]; - - if (!dep) - continue; - - dwc3_debugfs_create_endpoint_dir(dep, parent); - } -} - void dwc3_debugfs_init(struct dwc3 *dwc) { struct dentry *root; @@ -940,7 +924,6 @@ void dwc3_debugfs_init(struct dwc3 *dwc) &dwc3_testmode_fops); debugfs_create_file("link_state", 0644, root, dwc, &dwc3_link_state_fops); - dwc3_debugfs_create_endpoint_dirs(dwc, root); } } diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c index bdf1f98dfad8..ffe301d6ea35 100644 --- a/drivers/usb/dwc3/dwc3-meson-g12a.c +++ b/drivers/usb/dwc3/dwc3-meson-g12a.c @@ -651,7 +651,7 @@ static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv, return PTR_ERR(priv->usb_glue_regmap); /* Create a regmap for each USB2 PHY control register set */ - for (i = 0; i < priv->usb2_ports; i++) { + for (i = 0; i < priv->drvdata->num_phys; i++) { struct regmap_config u2p_regmap_config = { .reg_bits = 8, .val_bits = 32, @@ -659,6 +659,9 @@ static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv, .max_register = U2P_R1, }; + if (!strstr(priv->drvdata->phy_names[i], "usb2")) + continue; + u2p_regmap_config.name = devm_kasprintf(priv->dev, GFP_KERNEL, "u2p-%d", i); if (!u2p_regmap_config.name) @@ -772,13 +775,13 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) ret = priv->drvdata->usb_init(priv); if (ret) - goto err_disable_clks; + goto err_disable_regulator; /* Init PHYs */ for (i = 0 ; i < PHY_COUNT ; ++i) { ret = phy_init(priv->phys[i]); if (ret) - goto err_disable_clks; + goto err_disable_regulator; } /* Set PHY Power */ @@ -816,6 +819,10 @@ err_phys_exit: for (i = 0 ; i < PHY_COUNT ; ++i) phy_exit(priv->phys[i]); +err_disable_regulator: + if (priv->vbus) + regulator_disable(priv->vbus); + err_disable_clks: clk_bulk_disable_unprepare(priv->drvdata->num_clks, priv->drvdata->clks); diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 8b668ef46f7f..3cd294264372 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -292,6 +292,9 @@ static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le) epnum |= 1; dep = dwc->eps[epnum]; + if (dep == NULL) + return NULL; + if (dep->flags & DWC3_EP_ENABLED) return dep; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 612825a39f82..f14c2aa83759 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2261,13 +2261,10 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) } /* - * Synchronize any pending event handling before executing the controller - * halt routine. + * Synchronize and disable any further event handling while controller + * is being enabled/disabled. */ - if (!is_on) { - dwc3_gadget_disable_irq(dwc); - synchronize_irq(dwc->irq_gadget); - } + disable_irq(dwc->irq_gadget); spin_lock_irqsave(&dwc->lock, flags); @@ -2305,6 +2302,8 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) ret = dwc3_gadget_run_stop(dwc, is_on, false); spin_unlock_irqrestore(&dwc->lock, flags); + enable_irq(dwc->irq_gadget); + pm_runtime_put(dwc->dev); return ret; @@ -2754,6 +2753,8 @@ static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum) INIT_LIST_HEAD(&dep->started_list); INIT_LIST_HEAD(&dep->cancelled_list); + dwc3_debugfs_create_endpoint_dir(dep); + return 0; } @@ -2797,6 +2798,7 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) list_del(&dep->endpoint.ep_list); } + debugfs_remove_recursive(debugfs_lookup(dep->name, dwc->root)); kfree(dep); } } @@ -4046,6 +4048,7 @@ err5: dwc3_gadget_free_endpoints(dwc); err4: usb_put_gadget(dwc->gadget); + dwc->gadget = NULL; err3: dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce, dwc->bounce_addr); @@ -4065,6 +4068,9 @@ err0: void dwc3_gadget_exit(struct dwc3 *dwc) { + if (!dwc->gadget) + return; + usb_del_gadget(dwc->gadget); dwc3_gadget_free_endpoints(dwc); usb_put_gadget(dwc->gadget); diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c index 8bb25773b61e..05507606b2b4 100644 --- a/drivers/usb/gadget/config.c +++ b/drivers/usb/gadget/config.c @@ -164,6 +164,14 @@ int usb_assign_descriptors(struct usb_function *f, { struct usb_gadget *g = f->config->cdev->gadget; + /* super-speed-plus descriptor falls back to super-speed one, + * if such a descriptor was provided, thus avoiding a NULL + * pointer dereference if a 5gbps capable gadget is used with + * a 10gbps capable config (device port + cable + host port) + */ + if (!ssp) + ssp = ss; + if (fs) { f->fs_descriptors = usb_copy_descriptors(fs); if (!f->fs_descriptors) diff --git a/drivers/usb/gadget/function/f_ecm.c b/drivers/usb/gadget/function/f_ecm.c index 7f5cf488b2b1..ffe2486fce71 100644 --- a/drivers/usb/gadget/function/f_ecm.c +++ b/drivers/usb/gadget/function/f_ecm.c @@ -791,7 +791,7 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f) fs_ecm_notify_desc.bEndpointAddress; status = usb_assign_descriptors(f, ecm_fs_function, ecm_hs_function, - ecm_ss_function, NULL); + ecm_ss_function, ecm_ss_function); if (status) goto fail; diff --git a/drivers/usb/gadget/function/f_eem.c b/drivers/usb/gadget/function/f_eem.c index cfcc4e81fb77..2cd9942707b4 100644 --- a/drivers/usb/gadget/function/f_eem.c +++ b/drivers/usb/gadget/function/f_eem.c @@ -302,7 +302,7 @@ static int eem_bind(struct usb_configuration *c, struct usb_function *f) eem_ss_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress; status = usb_assign_descriptors(f, eem_fs_function, eem_hs_function, - eem_ss_function, NULL); + eem_ss_function, eem_ss_function); if (status) goto fail; @@ -495,7 +495,7 @@ static int eem_unwrap(struct gether *port, skb2 = skb_clone(skb, GFP_ATOMIC); if (unlikely(!skb2)) { DBG(cdev, "unable to unframe EEM packet\n"); - continue; + goto next; } skb_trim(skb2, len - ETH_FCS_LEN); @@ -505,7 +505,7 @@ static int eem_unwrap(struct gether *port, GFP_ATOMIC); if (unlikely(!skb3)) { dev_kfree_skb_any(skb2); - continue; + goto next; } dev_kfree_skb_any(skb2); skb_queue_tail(list, skb3); diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index bf109191659a..d4844afeaffc 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -3567,6 +3567,9 @@ static void ffs_func_unbind(struct usb_configuration *c, ffs->func = NULL; } + /* Drain any pending AIO completions */ + drain_workqueue(ffs->io_completion_wq); + if (!--opts->refcnt) functionfs_unbind(ffs); diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c index 1125f4715830..e55699308117 100644 --- a/drivers/usb/gadget/function/f_hid.c +++ b/drivers/usb/gadget/function/f_hid.c @@ -802,7 +802,8 @@ static int hidg_bind(struct usb_configuration *c, struct usb_function *f) hidg_fs_out_ep_desc.bEndpointAddress; status = usb_assign_descriptors(f, hidg_fs_descriptors, - hidg_hs_descriptors, hidg_ss_descriptors, NULL); + hidg_hs_descriptors, hidg_ss_descriptors, + hidg_ss_descriptors); if (status) goto fail; diff --git a/drivers/usb/gadget/function/f_loopback.c b/drivers/usb/gadget/function/f_loopback.c index b56ad7c3838b..ae41f556eb75 100644 --- a/drivers/usb/gadget/function/f_loopback.c +++ b/drivers/usb/gadget/function/f_loopback.c @@ -207,7 +207,7 @@ autoconf_fail: ss_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress; ret = usb_assign_descriptors(f, fs_loopback_descs, hs_loopback_descs, - ss_loopback_descs, NULL); + ss_loopback_descs, ss_loopback_descs); if (ret) return ret; diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index 019bea8e09cc..855127249f24 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -583,7 +583,7 @@ static void ncm_do_notify(struct f_ncm *ncm) data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); data[1] = data[0]; - DBG(cdev, "notify speed %d\n", ncm_bitrate(cdev->gadget)); + DBG(cdev, "notify speed %u\n", ncm_bitrate(cdev->gadget)); ncm->notify_state = NCM_NOTIFY_CONNECT; break; } @@ -1101,11 +1101,11 @@ static struct sk_buff *ncm_wrap_ntb(struct gether *port, ncm->ndp_dgram_count = 1; /* Note: we skip opts->next_ndp_index */ - } - /* Delay the timer. */ - hrtimer_start(&ncm->task_timer, TX_TIMEOUT_NSECS, - HRTIMER_MODE_REL_SOFT); + /* Start the timer. */ + hrtimer_start(&ncm->task_timer, TX_TIMEOUT_NSECS, + HRTIMER_MODE_REL_SOFT); + } /* Add the datagram position entries */ ntb_ndp = skb_put_zero(ncm->skb_tx_ndp, dgram_idx_len); diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c index f47fdc1fa7f1..59d382fe1bbf 100644 --- a/drivers/usb/gadget/function/f_printer.c +++ b/drivers/usb/gadget/function/f_printer.c @@ -1101,7 +1101,8 @@ autoconf_fail: ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; ret = usb_assign_descriptors(f, fs_printer_function, - hs_printer_function, ss_printer_function, NULL); + hs_printer_function, ss_printer_function, + ss_printer_function); if (ret) return ret; diff --git a/drivers/usb/gadget/function/f_rndis.c b/drivers/usb/gadget/function/f_rndis.c index 0739b05a0ef7..ee95e8f5f9d4 100644 --- a/drivers/usb/gadget/function/f_rndis.c +++ b/drivers/usb/gadget/function/f_rndis.c @@ -789,7 +789,7 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) ss_notify_desc.bEndpointAddress = fs_notify_desc.bEndpointAddress; status = usb_assign_descriptors(f, eth_fs_function, eth_hs_function, - eth_ss_function, NULL); + eth_ss_function, eth_ss_function); if (status) goto fail; diff --git a/drivers/usb/gadget/function/f_serial.c b/drivers/usb/gadget/function/f_serial.c index e62713846350..1ed8ff0ac2d3 100644 --- a/drivers/usb/gadget/function/f_serial.c +++ b/drivers/usb/gadget/function/f_serial.c @@ -233,7 +233,7 @@ static int gser_bind(struct usb_configuration *c, struct usb_function *f) gser_ss_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress; status = usb_assign_descriptors(f, gser_fs_function, gser_hs_function, - gser_ss_function, NULL); + gser_ss_function, gser_ss_function); if (status) goto fail; dev_dbg(&cdev->gadget->dev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n", diff --git a/drivers/usb/gadget/function/f_sourcesink.c b/drivers/usb/gadget/function/f_sourcesink.c index 5a201ba7b155..1abf08e5164a 100644 --- a/drivers/usb/gadget/function/f_sourcesink.c +++ b/drivers/usb/gadget/function/f_sourcesink.c @@ -431,7 +431,8 @@ no_iso: ss_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress; ret = usb_assign_descriptors(f, fs_source_sink_descs, - hs_source_sink_descs, ss_source_sink_descs, NULL); + hs_source_sink_descs, ss_source_sink_descs, + ss_source_sink_descs); if (ret) return ret; diff --git a/drivers/usb/gadget/function/f_subset.c b/drivers/usb/gadget/function/f_subset.c index 4d945254905d..51c1cae162d9 100644 --- a/drivers/usb/gadget/function/f_subset.c +++ b/drivers/usb/gadget/function/f_subset.c @@ -358,7 +358,7 @@ geth_bind(struct usb_configuration *c, struct usb_function *f) fs_subset_out_desc.bEndpointAddress; status = usb_assign_descriptors(f, fs_eth_function, hs_eth_function, - ss_eth_function, NULL); + ss_eth_function, ss_eth_function); if (status) goto fail; diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c index 7acb507946e6..de161ee0b1f9 100644 --- a/drivers/usb/gadget/function/f_tcm.c +++ b/drivers/usb/gadget/function/f_tcm.c @@ -2057,7 +2057,8 @@ static int tcm_bind(struct usb_configuration *c, struct usb_function *f) uasp_fs_cmd_desc.bEndpointAddress = uasp_ss_cmd_desc.bEndpointAddress; ret = usb_assign_descriptors(f, uasp_fs_function_desc, - uasp_hs_function_desc, uasp_ss_function_desc, NULL); + uasp_hs_function_desc, uasp_ss_function_desc, + uasp_ss_function_desc); if (ret) goto ep_fail; diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 7bc18cf8042c..18c2bbddf080 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -59,6 +59,7 @@ #define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI 0x1138 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI 0x461e +#define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba #define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb @@ -182,6 +183,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1))) xhci->quirks |= XHCI_U2_DISABLE_WAKE; + if (pdev->vendor == PCI_VENDOR_ID_AMD && + pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI) + xhci->quirks |= XHCI_BROKEN_D3COLD; + if (pdev->vendor == PCI_VENDOR_ID_INTEL) { xhci->quirks |= XHCI_LPM_SUPPORT; xhci->quirks |= XHCI_INTEL_HOST; @@ -539,7 +544,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) * Systems with the TI redriver that loses port status change events * need to have the registers polled during D3, so avoid D3cold. */ - if (xhci->quirks & XHCI_COMP_MODE_QUIRK) + if (xhci->quirks & (XHCI_COMP_MODE_QUIRK | XHCI_BROKEN_D3COLD)) pci_d3cold_disable(pdev); if (xhci->quirks & XHCI_PME_STUCK_QUIRK) diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 2595a8f057c4..e417f5ce13d1 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1892,6 +1892,7 @@ struct xhci_hcd { #define XHCI_DISABLE_SPARSE BIT_ULL(38) #define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39) #define XHCI_NO_SOFT_RETRY BIT_ULL(40) +#define XHCI_BROKEN_D3COLD BIT_ULL(41) unsigned int num_active_eps; unsigned int limit_active_eps; diff --git a/drivers/usb/misc/brcmstb-usb-pinmap.c b/drivers/usb/misc/brcmstb-usb-pinmap.c index b3cfe8666ea7..336653091e3b 100644 --- a/drivers/usb/misc/brcmstb-usb-pinmap.c +++ b/drivers/usb/misc/brcmstb-usb-pinmap.c @@ -263,6 +263,8 @@ static int __init brcmstb_usb_pinmap_probe(struct platform_device *pdev) return -EINVAL; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) + return -EINVAL; pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata) + diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 8f09a387b773..4c8f0112481f 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2009,9 +2009,8 @@ static void musb_pm_runtime_check_session(struct musb *musb) schedule_delayed_work(&musb->irq_work, msecs_to_jiffies(1000)); musb->quirk_retries--; - break; } - fallthrough; + break; case MUSB_QUIRK_B_INVALID_VBUS_91: if (musb->quirk_retries && !musb->flush_irq_work) { musb_dbg(musb, diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index ee595d1bea0a..fcb812bc832c 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -252,9 +252,11 @@ struct cp210x_serial_private { u8 gpio_input; #endif u8 partnum; + u32 fw_version; speed_t min_speed; speed_t max_speed; bool use_actual_rate; + bool no_flow_control; }; enum cp210x_event_state { @@ -398,6 +400,7 @@ struct cp210x_special_chars { /* CP210X_VENDOR_SPECIFIC values */ #define CP210X_READ_2NCONFIG 0x000E +#define CP210X_GET_FW_VER_2N 0x0010 #define CP210X_READ_LATCH 0x00C2 #define CP210X_GET_PARTNUM 0x370B #define CP210X_GET_PORTCONFIG 0x370C @@ -537,6 +540,12 @@ struct cp210x_single_port_config { #define CP210X_2NCONFIG_GPIO_RSTLATCH_IDX 587 #define CP210X_2NCONFIG_GPIO_CONTROL_IDX 600 +/* CP2102N QFN20 port configuration values */ +#define CP2102N_QFN20_GPIO2_TXLED_MODE BIT(2) +#define CP2102N_QFN20_GPIO3_RXLED_MODE BIT(3) +#define CP2102N_QFN20_GPIO1_RS485_MODE BIT(4) +#define CP2102N_QFN20_GPIO0_CLK_MODE BIT(6) + /* CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x2 bytes. */ struct cp210x_gpio_write { u8 mask; @@ -1122,6 +1131,7 @@ static bool cp210x_termios_change(const struct ktermios *a, const struct ktermio static void cp210x_set_flow_control(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { + struct cp210x_serial_private *priv = usb_get_serial_data(port->serial); struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); struct cp210x_special_chars chars; struct cp210x_flow_ctl flow_ctl; @@ -1129,6 +1139,15 @@ static void cp210x_set_flow_control(struct tty_struct *tty, u32 ctl_hs; int ret; + /* + * Some CP2102N interpret ulXonLimit as ulFlowReplace (erratum + * CP2102N_E104). Report back that flow control is not supported. + */ + if (priv->no_flow_control) { + tty->termios.c_cflag &= ~CRTSCTS; + tty->termios.c_iflag &= ~(IXON | IXOFF); + } + if (old_termios && C_CRTSCTS(tty) == (old_termios->c_cflag & CRTSCTS) && I_IXON(tty) == (old_termios->c_iflag & IXON) && @@ -1185,19 +1204,20 @@ static void cp210x_set_flow_control(struct tty_struct *tty, port_priv->crtscts = false; } - if (I_IXOFF(tty)) + if (I_IXOFF(tty)) { flow_repl |= CP210X_SERIAL_AUTO_RECEIVE; - else + + flow_ctl.ulXonLimit = cpu_to_le32(128); + flow_ctl.ulXoffLimit = cpu_to_le32(128); + } else { flow_repl &= ~CP210X_SERIAL_AUTO_RECEIVE; + } if (I_IXON(tty)) flow_repl |= CP210X_SERIAL_AUTO_TRANSMIT; else flow_repl &= ~CP210X_SERIAL_AUTO_TRANSMIT; - flow_ctl.ulXonLimit = cpu_to_le32(128); - flow_ctl.ulXoffLimit = cpu_to_le32(128); - dev_dbg(&port->dev, "%s - ctrl = 0x%02x, flow = 0x%02x\n", __func__, ctl_hs, flow_repl); @@ -1733,7 +1753,19 @@ static int cp2102n_gpioconf_init(struct usb_serial *serial) priv->gpio_pushpull = (gpio_pushpull >> 3) & 0x0f; /* 0 indicates GPIO mode, 1 is alternate function */ - priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f; + if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN20) { + /* QFN20 is special... */ + if (gpio_ctrl & CP2102N_QFN20_GPIO0_CLK_MODE) /* GPIO 0 */ + priv->gpio_altfunc |= BIT(0); + if (gpio_ctrl & CP2102N_QFN20_GPIO1_RS485_MODE) /* GPIO 1 */ + priv->gpio_altfunc |= BIT(1); + if (gpio_ctrl & CP2102N_QFN20_GPIO2_TXLED_MODE) /* GPIO 2 */ + priv->gpio_altfunc |= BIT(2); + if (gpio_ctrl & CP2102N_QFN20_GPIO3_RXLED_MODE) /* GPIO 3 */ + priv->gpio_altfunc |= BIT(3); + } else { + priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f; + } if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN28) { /* @@ -1908,6 +1940,45 @@ static void cp210x_init_max_speed(struct usb_serial *serial) priv->use_actual_rate = use_actual_rate; } +static int cp210x_get_fw_version(struct usb_serial *serial, u16 value) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + u8 ver[3]; + int ret; + + ret = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST, value, + ver, sizeof(ver)); + if (ret) + return ret; + + dev_dbg(&serial->interface->dev, "%s - %d.%d.%d\n", __func__, + ver[0], ver[1], ver[2]); + + priv->fw_version = ver[0] << 16 | ver[1] << 8 | ver[2]; + + return 0; +} + +static void cp210x_determine_quirks(struct usb_serial *serial) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + int ret; + + switch (priv->partnum) { + case CP210X_PARTNUM_CP2102N_QFN28: + case CP210X_PARTNUM_CP2102N_QFN24: + case CP210X_PARTNUM_CP2102N_QFN20: + ret = cp210x_get_fw_version(serial, CP210X_GET_FW_VER_2N); + if (ret) + break; + if (priv->fw_version <= 0x10004) + priv->no_flow_control = true; + break; + default: + break; + } +} + static int cp210x_attach(struct usb_serial *serial) { int result; @@ -1928,6 +1999,7 @@ static int cp210x_attach(struct usb_serial *serial) usb_set_serial_data(serial, priv); + cp210x_determine_quirks(serial); cp210x_init_max_speed(serial); result = cp210x_gpio_init(serial); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 369ef140df78..4a1f3a95d017 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -611,6 +611,7 @@ static const struct usb_device_id id_table_combined[] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLX_PLUS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_NT_ORION_IO_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_NT_ORIONMX_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index d854e04a4286..add602bebd82 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -581,6 +581,7 @@ #define FTDI_NT_ORIONLXM_PID 0x7c90 /* OrionLXm Substation Automation Platform */ #define FTDI_NT_ORIONLX_PLUS_PID 0x7c91 /* OrionLX+ Substation Automation Platform */ #define FTDI_NT_ORION_IO_PID 0x7c92 /* Orion I/O */ +#define FTDI_NT_ORIONMX_PID 0x7c93 /* OrionMX */ /* * Synapse Wireless product ids (FTDI_VID) diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 83c62f920c50..41f1b872d277 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * USB ZyXEL omni.net LCD PLUS driver + * USB ZyXEL omni.net driver * * Copyright (C) 2013,2017 Johan Hovold <johan@kernel.org> * @@ -22,10 +22,11 @@ #include <linux/usb/serial.h> #define DRIVER_AUTHOR "Alessandro Zummo" -#define DRIVER_DESC "USB ZyXEL omni.net LCD PLUS Driver" +#define DRIVER_DESC "USB ZyXEL omni.net Driver" #define ZYXEL_VENDOR_ID 0x0586 #define ZYXEL_OMNINET_ID 0x1000 +#define ZYXEL_OMNI_56K_PLUS_ID 0x1500 /* This one seems to be a re-branded ZyXEL device */ #define BT_IGNITIONPRO_ID 0x2000 @@ -40,6 +41,7 @@ static void omninet_port_remove(struct usb_serial_port *port); static const struct usb_device_id id_table[] = { { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) }, + { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNI_56K_PLUS_ID) }, { USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) }, { } /* Terminating entry */ }; @@ -50,7 +52,7 @@ static struct usb_serial_driver zyxel_omninet_device = { .owner = THIS_MODULE, .name = "omninet", }, - .description = "ZyXEL - omni.net lcd plus usb", + .description = "ZyXEL - omni.net usb", .id_table = id_table, .num_bulk_out = 2, .calc_num_ports = omninet_calc_num_ports, diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index 5f2e7f668e68..067690dac24c 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -416,7 +416,7 @@ static void qt2_close(struct usb_serial_port *port) /* flush the port transmit buffer */ i = usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), + usb_sndctrlpipe(serial->dev, 0), QT2_FLUSH_DEVICE, 0x40, 1, port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT); @@ -426,7 +426,7 @@ static void qt2_close(struct usb_serial_port *port) /* flush the port receive buffer */ i = usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), + usb_sndctrlpipe(serial->dev, 0), QT2_FLUSH_DEVICE, 0x40, 0, port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT); @@ -639,7 +639,7 @@ static int qt2_attach(struct usb_serial *serial) int status; /* power on unit */ - status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + status = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 0xc2, 0x40, 0x8000, 0, NULL, 0, QT2_USB_TIMEOUT); if (status < 0) { diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c index 8514bec7e1b8..77dabd306ba8 100644 --- a/drivers/usb/typec/mux.c +++ b/drivers/usb/typec/mux.c @@ -239,7 +239,7 @@ find_mux: dev = class_find_device(&typec_mux_class, NULL, fwnode, mux_fwnode_match); - return dev ? to_typec_switch(dev) : ERR_PTR(-EPROBE_DEFER); + return dev ? to_typec_mux(dev) : ERR_PTR(-EPROBE_DEFER); } /** diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c index 46a25b8db72e..ffa8aa12d5f1 100644 --- a/drivers/usb/typec/mux/intel_pmc_mux.c +++ b/drivers/usb/typec/mux/intel_pmc_mux.c @@ -582,10 +582,15 @@ static int pmc_usb_probe_iom(struct pmc_usb *pmc) acpi_dev_free_resource_list(&resource_list); if (!pmc->iom_base) { - put_device(&adev->dev); + acpi_dev_put(adev); return -ENOMEM; } + if (IS_ERR(pmc->iom_base)) { + acpi_dev_put(adev); + return PTR_ERR(pmc->iom_base); + } + pmc->iom_adev = adev; return 0; @@ -636,8 +641,10 @@ static int pmc_usb_probe(struct platform_device *pdev) break; ret = pmc_usb_register_port(pmc, i, fwnode); - if (ret) + if (ret) { + fwnode_handle_put(fwnode); goto err_remove_ports; + } } platform_set_drvdata(pdev, pmc); @@ -651,7 +658,7 @@ err_remove_ports: usb_role_switch_unregister(pmc->port[i].usb_sw); } - put_device(&pmc->iom_adev->dev); + acpi_dev_put(pmc->iom_adev); return ret; } @@ -667,7 +674,7 @@ static int pmc_usb_remove(struct platform_device *pdev) usb_role_switch_unregister(pmc->port[i].usb_sw); } - put_device(&pmc->iom_adev->dev); + acpi_dev_put(pmc->iom_adev); return 0; } diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 9ce8c9af4da5..63470cf7f4cd 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -401,6 +401,8 @@ struct tcpm_port { unsigned int nr_src_pdo; u32 snk_pdo[PDO_MAX_OBJECTS]; unsigned int nr_snk_pdo; + u32 snk_vdo_v1[VDO_MAX_OBJECTS]; + unsigned int nr_snk_vdo_v1; u32 snk_vdo[VDO_MAX_OBJECTS]; unsigned int nr_snk_vdo; @@ -1547,42 +1549,45 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct typec_altmode *adev, if (PD_VDO_VID(p[0]) != USB_SID_PD) break; - if (PD_VDO_SVDM_VER(p[0]) < svdm_version) + if (PD_VDO_SVDM_VER(p[0]) < svdm_version) { typec_partner_set_svdm_version(port->partner, PD_VDO_SVDM_VER(p[0])); + svdm_version = PD_VDO_SVDM_VER(p[0]); + } - tcpm_ams_start(port, DISCOVER_IDENTITY); - /* 6.4.4.3.1: Only respond as UFP (device) */ - if (port->data_role == TYPEC_DEVICE && + port->ams = DISCOVER_IDENTITY; + /* + * PD2.0 Spec 6.10.3: respond with NAK as DFP (data host) + * PD3.1 Spec 6.4.4.2.5.1: respond with NAK if "invalid field" or + * "wrong configuation" or "Unrecognized" + */ + if ((port->data_role == TYPEC_DEVICE || svdm_version >= SVDM_VER_2_0) && port->nr_snk_vdo) { - /* - * Product Type DFP and Connector Type are not defined in SVDM - * version 1.0 and shall be set to zero. - */ - if (typec_get_negotiated_svdm_version(typec) < SVDM_VER_2_0) - response[1] = port->snk_vdo[0] & ~IDH_DFP_MASK - & ~IDH_CONN_MASK; - else - response[1] = port->snk_vdo[0]; - for (i = 1; i < port->nr_snk_vdo; i++) - response[i + 1] = port->snk_vdo[i]; - rlen = port->nr_snk_vdo + 1; + if (svdm_version < SVDM_VER_2_0) { + for (i = 0; i < port->nr_snk_vdo_v1; i++) + response[i + 1] = port->snk_vdo_v1[i]; + rlen = port->nr_snk_vdo_v1 + 1; + + } else { + for (i = 0; i < port->nr_snk_vdo; i++) + response[i + 1] = port->snk_vdo[i]; + rlen = port->nr_snk_vdo + 1; + } } break; case CMD_DISCOVER_SVID: - tcpm_ams_start(port, DISCOVER_SVIDS); + port->ams = DISCOVER_SVIDS; break; case CMD_DISCOVER_MODES: - tcpm_ams_start(port, DISCOVER_MODES); + port->ams = DISCOVER_MODES; break; case CMD_ENTER_MODE: - tcpm_ams_start(port, DFP_TO_UFP_ENTER_MODE); + port->ams = DFP_TO_UFP_ENTER_MODE; break; case CMD_EXIT_MODE: - tcpm_ams_start(port, DFP_TO_UFP_EXIT_MODE); + port->ams = DFP_TO_UFP_EXIT_MODE; break; case CMD_ATTENTION: - tcpm_ams_start(port, ATTENTION); /* Attention command does not have response */ *adev_action = ADEV_ATTENTION; return 0; @@ -1937,6 +1942,9 @@ static void vdm_run_state_machine(struct tcpm_port *port) tcpm_log(port, "VDM Tx error, retry"); port->vdm_retries++; port->vdm_state = VDM_STATE_READY; + if (PD_VDO_SVDM(vdo_hdr) && PD_VDO_CMDT(vdo_hdr) == CMDT_INIT) + tcpm_ams_finish(port); + } else { tcpm_ams_finish(port); } break; @@ -2183,20 +2191,25 @@ static void tcpm_handle_alert(struct tcpm_port *port, const __le32 *payload, if (!type) { tcpm_log(port, "Alert message received with no type"); + tcpm_queue_message(port, PD_MSG_CTRL_NOT_SUPP); return; } /* Just handling non-battery alerts for now */ if (!(type & USB_PD_ADO_TYPE_BATT_STATUS_CHANGE)) { - switch (port->state) { - case SRC_READY: - case SNK_READY: + if (port->pwr_role == TYPEC_SOURCE) { + port->upcoming_state = GET_STATUS_SEND; + tcpm_ams_start(port, GETTING_SOURCE_SINK_STATUS); + } else { + /* + * Do not check SinkTxOk here in case the Source doesn't set its Rp to + * SinkTxOk in time. + */ + port->ams = GETTING_SOURCE_SINK_STATUS; tcpm_set_state(port, GET_STATUS_SEND, 0); - break; - default: - tcpm_queue_message(port, PD_MSG_CTRL_WAIT); - break; } + } else { + tcpm_queue_message(port, PD_MSG_CTRL_NOT_SUPP); } } @@ -2440,7 +2453,12 @@ static void tcpm_pd_data_request(struct tcpm_port *port, tcpm_pd_handle_state(port, BIST_RX, BIST, 0); break; case PD_DATA_ALERT: - tcpm_handle_alert(port, msg->payload, cnt); + if (port->state != SRC_READY && port->state != SNK_READY) + tcpm_pd_handle_state(port, port->pwr_role == TYPEC_SOURCE ? + SRC_SOFT_RESET_WAIT_SNK_TX : SNK_SOFT_RESET, + NONE_AMS, 0); + else + tcpm_handle_alert(port, msg->payload, cnt); break; case PD_DATA_BATT_STATUS: case PD_DATA_GET_COUNTRY_INFO: @@ -2764,24 +2782,16 @@ static void tcpm_pd_ext_msg_request(struct tcpm_port *port, switch (type) { case PD_EXT_STATUS: - /* - * If PPS related events raised then get PPS status to clear - * (see USB PD 3.0 Spec, 6.5.2.4) - */ - if (msg->ext_msg.data[USB_PD_EXT_SDB_EVENT_FLAGS] & - USB_PD_EXT_SDB_PPS_EVENTS) - tcpm_pd_handle_state(port, GET_PPS_STATUS_SEND, - GETTING_SOURCE_SINK_STATUS, 0); - - else - tcpm_pd_handle_state(port, ready_state(port), NONE_AMS, 0); - break; case PD_EXT_PPS_STATUS: - /* - * For now the PPS status message is used to clear events - * and nothing more. - */ - tcpm_pd_handle_state(port, ready_state(port), NONE_AMS, 0); + if (port->ams == GETTING_SOURCE_SINK_STATUS) { + tcpm_ams_finish(port); + tcpm_set_state(port, ready_state(port), 0); + } else { + /* unexpected Status or PPS_Status Message */ + tcpm_pd_handle_state(port, port->pwr_role == TYPEC_SOURCE ? + SRC_SOFT_RESET_WAIT_SNK_TX : SNK_SOFT_RESET, + NONE_AMS, 0); + } break; case PD_EXT_SOURCE_CAP_EXT: case PD_EXT_GET_BATT_CAP: @@ -5947,6 +5957,22 @@ sink: return ret; } + /* If sink-vdos is found, sink-vdos-v1 is expected for backward compatibility. */ + if (port->nr_snk_vdo) { + ret = fwnode_property_count_u32(fwnode, "sink-vdos-v1"); + if (ret < 0) + return ret; + else if (ret == 0) + return -ENODATA; + + port->nr_snk_vdo_v1 = min(ret, VDO_MAX_OBJECTS); + ret = fwnode_property_read_u32_array(fwnode, "sink-vdos-v1", + port->snk_vdo_v1, + port->nr_snk_vdo_v1); + if (ret < 0) + return ret; + } + return 0; } @@ -6312,6 +6338,11 @@ void tcpm_unregister_port(struct tcpm_port *port) { int i; + hrtimer_cancel(&port->send_discover_timer); + hrtimer_cancel(&port->enable_frs_timer); + hrtimer_cancel(&port->vdm_state_machine_timer); + hrtimer_cancel(&port->state_machine_timer); + tcpm_reset_port(port); for (i = 0; i < ARRAY_SIZE(port->port_altmode); i++) typec_unregister_altmode(port->port_altmode[i]); diff --git a/drivers/usb/typec/tcpm/wcove.c b/drivers/usb/typec/tcpm/wcove.c index 79ae63950050..5d125339687a 100644 --- a/drivers/usb/typec/tcpm/wcove.c +++ b/drivers/usb/typec/tcpm/wcove.c @@ -378,7 +378,7 @@ static int wcove_pd_transmit(struct tcpc_dev *tcpc, const u8 *data = (void *)msg; int i; - for (i = 0; i < pd_header_cnt(msg->header) * 4 + 2; i++) { + for (i = 0; i < pd_header_cnt_le(msg->header) * 4 + 2; i++) { ret = regmap_write(wcove->regmap, USBC_TX_DATA + i, data[i]); if (ret) diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c index b433169ef6fa..b7d104c80d85 100644 --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -1253,6 +1253,7 @@ err_unregister: } err_reset: + memset(&ucsi->cap, 0, sizeof(ucsi->cap)); ucsi_reset_ppm(ucsi); err: return ret; diff --git a/include/dt-bindings/usb/pd.h b/include/dt-bindings/usb/pd.h index fef3ef65967f..e6526b138174 100644 --- a/include/dt-bindings/usb/pd.h +++ b/include/dt-bindings/usb/pd.h @@ -106,6 +106,10 @@ * <20:16> :: Reserved, Shall be set to zero * <15:0> :: USB-IF assigned VID for this cable vendor */ + +/* PD Rev2.0 definition */ +#define IDH_PTYPE_UNDEF 0 + /* SOP Product Type (UFP) */ #define IDH_PTYPE_NOT_UFP 0 #define IDH_PTYPE_HUB 1 @@ -163,10 +167,10 @@ #define UFP_VDO_VER1_2 2 /* Device Capability */ -#define DEV_USB2_CAPABLE BIT(0) -#define DEV_USB2_BILLBOARD BIT(1) -#define DEV_USB3_CAPABLE BIT(2) -#define DEV_USB4_CAPABLE BIT(3) +#define DEV_USB2_CAPABLE (1 << 0) +#define DEV_USB2_BILLBOARD (1 << 1) +#define DEV_USB3_CAPABLE (1 << 2) +#define DEV_USB4_CAPABLE (1 << 3) /* Connector Type */ #define UFP_RECEPTACLE 2 @@ -191,9 +195,9 @@ /* Alternate Modes */ #define UFP_ALTMODE_NOT_SUPP 0 -#define UFP_ALTMODE_TBT3 BIT(0) -#define UFP_ALTMODE_RECFG BIT(1) -#define UFP_ALTMODE_NO_RECFG BIT(2) +#define UFP_ALTMODE_TBT3 (1 << 0) +#define UFP_ALTMODE_RECFG (1 << 1) +#define UFP_ALTMODE_NO_RECFG (1 << 2) /* USB Highest Speed */ #define UFP_USB2_ONLY 0 @@ -217,9 +221,9 @@ * <4:0> :: Port number */ #define DFP_VDO_VER1_1 1 -#define HOST_USB2_CAPABLE BIT(0) -#define HOST_USB3_CAPABLE BIT(1) -#define HOST_USB4_CAPABLE BIT(2) +#define HOST_USB2_CAPABLE (1 << 0) +#define HOST_USB3_CAPABLE (1 << 1) +#define HOST_USB4_CAPABLE (1 << 2) #define DFP_RECEPTACLE 2 #define DFP_CAPTIVE 3 @@ -228,7 +232,25 @@ | ((pnum) & 0x1f)) /* - * Passive Cable VDO + * Cable VDO (for both Passive and Active Cable VDO in PD Rev2.0) + * --------- + * <31:28> :: Cable HW version + * <27:24> :: Cable FW version + * <23:20> :: Reserved, Shall be set to zero + * <19:18> :: type-C to Type-A/B/C/Captive (00b == A, 01 == B, 10 == C, 11 == Captive) + * <17> :: Reserved, Shall be set to zero + * <16:13> :: cable latency (0001 == <10ns(~1m length)) + * <12:11> :: cable termination type (11b == both ends active VCONN req) + * <10> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable) + * <9> :: SSTX2 Directionality support + * <8> :: SSRX1 Directionality support + * <7> :: SSRX2 Directionality support + * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A) + * <4> :: Vbus through cable (0b == no, 1b == yes) + * <3> :: SOP" controller present? (0b == no, 1b == yes) + * <2:0> :: USB SS Signaling support + * + * Passive Cable VDO (PD Rev3.0+) * --------- * <31:28> :: Cable HW version * <27:24> :: Cable FW version @@ -244,7 +266,7 @@ * <4:3> :: Reserved, Shall be set to zero * <2:0> :: USB highest speed * - * Active Cable VDO 1 + * Active Cable VDO 1 (PD Rev3.0+) * --------- * <31:28> :: Cable HW version * <27:24> :: Cable FW version @@ -266,7 +288,9 @@ #define CABLE_VDO_VER1_0 0 #define CABLE_VDO_VER1_3 3 -/* Connector Type */ +/* Connector Type (_ATYPE and _BTYPE are for PD Rev2.0 only) */ +#define CABLE_ATYPE 0 +#define CABLE_BTYPE 1 #define CABLE_CTYPE 2 #define CABLE_CAPTIVE 3 @@ -303,12 +327,22 @@ #define CABLE_CURR_3A 1 #define CABLE_CURR_5A 2 +/* USB SuperSpeed Signaling Support (PD Rev2.0) */ +#define CABLE_USBSS_U2_ONLY 0 +#define CABLE_USBSS_U31_GEN1 1 +#define CABLE_USBSS_U31_GEN2 2 + /* USB Highest Speed */ #define CABLE_USB2_ONLY 0 #define CABLE_USB32_GEN1 1 #define CABLE_USB32_4_GEN2 2 #define CABLE_USB4_GEN3 3 +#define VDO_CABLE(hw, fw, cbl, lat, term, tx1d, tx2d, rx1d, rx2d, cur, vps, sopp, usbss) \ + (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 | ((cbl) & 0x3) << 18 \ + | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11 | (tx1d) << 10 \ + | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7 | ((cur) & 0x3) << 5 \ + | (vps) << 4 | (sopp) << 3 | ((usbss) & 0x7)) #define VDO_PCABLE(hw, fw, ver, conn, lat, term, vbm, cur, spd) \ (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21 \ | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11 \ @@ -374,6 +408,35 @@ | (iso) << 2 | (gen)) /* + * AMA VDO (PD Rev2.0) + * --------- + * <31:28> :: Cable HW version + * <27:24> :: Cable FW version + * <23:12> :: Reserved, Shall be set to zero + * <11> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable) + * <10> :: SSTX2 Directionality support + * <9> :: SSRX1 Directionality support + * <8> :: SSRX2 Directionality support + * <7:5> :: Vconn power + * <4> :: Vconn power required + * <3> :: Vbus power required + * <2:0> :: USB SS Signaling support + */ +#define VDO_AMA(hw, fw, tx1d, tx2d, rx1d, rx2d, vcpwr, vcr, vbr, usbss) \ + (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 \ + | (tx1d) << 11 | (tx2d) << 10 | (rx1d) << 9 | (rx2d) << 8 \ + | ((vcpwr) & 0x7) << 5 | (vcr) << 4 | (vbr) << 3 \ + | ((usbss) & 0x7)) + +#define PD_VDO_AMA_VCONN_REQ(vdo) (((vdo) >> 4) & 1) +#define PD_VDO_AMA_VBUS_REQ(vdo) (((vdo) >> 3) & 1) + +#define AMA_USBSS_U2_ONLY 0 +#define AMA_USBSS_U31_GEN1 1 +#define AMA_USBSS_U31_GEN2 2 +#define AMA_USBSS_BBONLY 3 + +/* * VPD VDO * --------- * <31:28> :: HW version diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h index bf00259493e0..96b7ff66f074 100644 --- a/include/linux/usb/pd.h +++ b/include/linux/usb/pd.h @@ -460,7 +460,7 @@ static inline unsigned int rdo_max_power(u32 rdo) #define PD_T_RECEIVER_RESPONSE 15 /* 15ms max */ #define PD_T_SOURCE_ACTIVITY 45 #define PD_T_SINK_ACTIVITY 135 -#define PD_T_SINK_WAIT_CAP 240 +#define PD_T_SINK_WAIT_CAP 310 /* 310 - 620 ms */ #define PD_T_PS_TRANSITION 500 #define PD_T_SRC_TRANSITION 35 #define PD_T_DRP_SNK 40 diff --git a/include/linux/usb/pd_ext_sdb.h b/include/linux/usb/pd_ext_sdb.h index 0eb83ce19597..b517ebc8f0ff 100644 --- a/include/linux/usb/pd_ext_sdb.h +++ b/include/linux/usb/pd_ext_sdb.h @@ -24,8 +24,4 @@ enum usb_pd_ext_sdb_fields { #define USB_PD_EXT_SDB_EVENT_OVP BIT(3) #define USB_PD_EXT_SDB_EVENT_CF_CV_MODE BIT(4) -#define USB_PD_EXT_SDB_PPS_EVENTS (USB_PD_EXT_SDB_EVENT_OCP | \ - USB_PD_EXT_SDB_EVENT_OTP | \ - USB_PD_EXT_SDB_EVENT_OVP) - #endif /* __LINUX_USB_PD_EXT_SDB_H */ |