Merge tag 'net-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from can, xfrm and netfilter subtrees.

  Notably this reverts a recent TCP/DCCP netns-related change to address
  a possible UaF.

  Current release - regressions:

   - tcp: revert "tcp/dccp: get rid of inet_twsk_purge()"

   - xfrm: set dst dev to blackhole_netdev instead of loopback_dev in
     ifdown

  Previous releases - regressions:

   - netfilter: flowtable: fix TCP flow teardown

   - can: revert "can: m_can: pci: use custom bit timings for Elkhart
     Lake"

   - xfrm: check encryption module availability consistency

   - eth: vmxnet3: fix possible use-after-free bugs in
     vmxnet3_rq_alloc_rx_buf()

   - eth: mlx5: initialize flow steering during driver probe

   - eth: ice: fix crash when writing timestamp on RX rings

  Previous releases - always broken:

   - mptcp: fix checksum byte order

   - eth: lan966x: fix assignment of the MAC address

   - eth: mlx5: remove HW-GRO from reported features

   - eth: ftgmac100: disable hardware checksum on AST2600"

* tag 'net-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
  net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.
  ptp: ocp: change sysfs attr group handling
  selftests: forwarding: fix missing backslash
  netfilter: nf_tables: disable expression reduction infra
  netfilter: flowtable: move dst_check to packet path
  netfilter: flowtable: fix TCP flow teardown
  net: ftgmac100: Disable hardware checksum on AST2600
  igb: skip phy status check where unavailable
  nfc: pn533: Fix buggy cleanup order
  mptcp: Do TCP fallback on early DSS checksum failure
  mptcp: fix checksum byte order
  net: af_key: check encryption module availability consistency
  net: af_key: add check for pfkey_broadcast in function pfkey_process
  net/mlx5: Drain fw_reset when removing device
  net/mlx5e: CT: Fix setting flow_source for smfs ct tuples
  net/mlx5e: CT: Fix support for GRE tuples
  net/mlx5e: Remove HW-GRO from reported features
  net/mlx5e: Properly block HW GRO when XDP is enabled
  net/mlx5e: Properly block LRO when XDP is enabled
  net/mlx5e: Block rx-gro-hw feature in switchdev mode
  ...

2 files changed, 47 insertions, 3 deletions

diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile
index c87e674b61b1..e811090f7748 100644
--- a/tools/testing/selftests/net/forwarding/Makefile
+++ b/tools/testing/selftests/net/forwarding/Makefile
@@ -86,7 +86,7 @@ TEST_PROGS = bridge_igmp.sh \
 	vxlan_bridge_1d_port_8472.sh \
 	vxlan_bridge_1d.sh \
 	vxlan_bridge_1q_ipv6.sh \
-	vxlan_bridge_1q_port_8472_ipv6.sh
+	vxlan_bridge_1q_port_8472_ipv6.sh \
 	vxlan_bridge_1q_port_8472.sh \
 	vxlan_bridge_1q.sh \
 	vxlan_symmetric_ipv6.sh \
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 7314257d248a..48ef112f42c2 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -1444,6 +1444,33 @@ chk_prio_nr()
 	[ "${dump_stats}" = 1 ] && dump_stats
 }
 
+chk_subflow_nr()
+{
+	local need_title="$1"
+	local msg="$2"
+	local subflow_nr=$3
+	local cnt1
+	local cnt2
+
+	if [ -n "${need_title}" ]; then
+		printf "%03u %-36s %s" "${TEST_COUNT}" "${TEST_NAME}" "${msg}"
+	else
+		printf "%-${nr_blank}s %s" " " "${msg}"
+	fi
+
+	cnt1=$(ss -N $ns1 -tOni | grep -c token)
+	cnt2=$(ss -N $ns2 -tOni | grep -c token)
+	if [ "$cnt1" != "$subflow_nr" -o "$cnt2" != "$subflow_nr" ]; then
+		echo "[fail] got $cnt1:$cnt2 subflows expected $subflow_nr"
+		fail_test
+		dump_stats=1
+	else
+		echo "[ ok ]"
+	fi
+
+	[ "${dump_stats}" = 1 ] && ( ss -N $ns1 -tOni ; ss -N $ns1 -tOni | grep token; ip -n $ns1 mptcp endpoint )
+}
+
 chk_link_usage()
 {
 	local ns=$1
@@ -2556,7 +2583,7 @@ fastclose_tests()
 	fi
 }
 
-implicit_tests()
+endpoint_tests()
 {
 	# userspace pm type prevents add_addr
 	if reset "implicit EP"; then
@@ -2578,6 +2605,23 @@ implicit_tests()
 			$ns2 10.0.2.2 id 1 flags signal
 		wait
 	fi
+
+	if reset "delete and re-add"; then
+		pm_nl_set_limits $ns1 1 1
+		pm_nl_set_limits $ns2 1 1
+		pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow
+		run_tests $ns1 $ns2 10.0.1.1 4 0 0 slow &
+
+		wait_mpj $ns2
+		pm_nl_del_endpoint $ns2 2 10.0.2.2
+		sleep 0.5
+		chk_subflow_nr needtitle "after delete" 1
+
+		pm_nl_add_endpoint $ns2 10.0.2.2 dev ns2eth2 flags subflow
+		wait_mpj $ns2
+		chk_subflow_nr "" "after re-add" 2
+		wait
+	fi
 }
 
 # [$1: error message]
@@ -2624,7 +2668,7 @@ all_tests_sorted=(
 	d@deny_join_id0_tests
 	m@fullmesh_tests
 	z@fastclose_tests
-	I@implicit_tests
+	I@endpoint_tests
 )
 
 all_tests_args=""