Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi
    Kivilinna.

 2) Fix loss of RTT samples in rxrpc, from David Howells.

 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu.

 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka.

 5) We disable BH for too lokng in sctp_get_port_local(), add a
    cond_resched() here as well, from Xin Long.

 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu.

 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from
    Yonghong Song.

 8) Missing of_node_put() in mt7530 DSA driver, from Sumera
    Priyadarsini.

 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan.

10) Fix geneve tunnel checksumming bug in hns3, from Yi Li.

11) Memory leak in rxkad_verify_response, from Dinghao Liu.

12) In tipc, don't use smp_processor_id() in preemptible context. From
    Tuong Lien.

13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu.

14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter.

15) Fix ABI mismatch between driver and firmware in nfp, from Louis
    Peens.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits)
  net/smc: fix sock refcounting in case of termination
  net/smc: reset sndbuf_desc if freed
  net/smc: set rx_off for SMCR explicitly
  net/smc: fix toleration of fake add_link messages
  tg3: Fix soft lockup when tg3_reset_task() fails.
  doc: net: dsa: Fix typo in config code sample
  net: dp83867: Fix WoL SecureOn password
  nfp: flower: fix ABI mismatch between driver and firmware
  tipc: fix shutdown() of connectionless socket
  ipv6: Fix sysctl max for fib_multipath_hash_policy
  drivers/net/wan/hdlc: Change the default of hard_header_len to 0
  net: gemini: Fix another missing clk_disable_unprepare() in probe
  net: bcmgenet: fix mask check in bcmgenet_validate_flow()
  amd-xgbe: Add support for new port mode
  net: usb: dm9601: Add USB ID of Keenetic Plus DSL
  vhost: fix typo in error message
  net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
  pktgen: fix error message with wrong function name
  net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
  cxgb4: fix thermal zone device registration
  ...

3 files changed, 42 insertions, 31 deletions

diff --git a/tools/testing/selftests/bpf/test_maps.c b/tools/testing/selftests/bpf/test_maps.c
index 754cf611723e..0d92ebcb335d 100644
--- a/tools/testing/selftests/bpf/test_maps.c
+++ b/tools/testing/selftests/bpf/test_maps.c
@@ -1274,6 +1274,8 @@ static void __run_parallel(unsigned int tasks,
 	pid_t pid[tasks];
 	int i;
 
+	fflush(stdout);
+
 	for (i = 0; i < tasks; i++) {
 		pid[i] = fork();
 		if (pid[i] == 0) {
diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c
index b1e4dadacd9b..22943b58d752 100644
--- a/tools/testing/selftests/bpf/test_progs.c
+++ b/tools/testing/selftests/bpf/test_progs.c
@@ -618,7 +618,9 @@ int cd_flavor_subdir(const char *exec_name)
 	if (!flavor)
 		return 0;
 	flavor++;
-	fprintf(stdout, "Switching to flavor '%s' subdirectory...\n", flavor);
+	if (env.verbosity > VERBOSE_NONE)
+		fprintf(stdout,	"Switching to flavor '%s' subdirectory...\n", flavor);
+
 	return chdir(flavor);
 }
 
diff --git a/tools/testing/selftests/netfilter/nft_flowtable.sh b/tools/testing/selftests/netfilter/nft_flowtable.sh
index a47d1d832210..431296c0f91c 100755
--- a/tools/testing/selftests/netfilter/nft_flowtable.sh
+++ b/tools/testing/selftests/netfilter/nft_flowtable.sh
@@ -11,7 +11,7 @@
 # result in fragmentation and/or PMTU discovery.
 #
 # You can check with different Orgininator/Link/Responder MTU eg:
-# sh nft_flowtable.sh -o1000 -l500 -r100
+# nft_flowtable.sh -o8000 -l1500 -r2000
 #
 
 
@@ -27,8 +27,7 @@ ns2out=""
 log_netns=$(sysctl -n net.netfilter.nf_log_all_netns)
 
 checktool (){
-	$1 > /dev/null 2>&1
-	if [ $? -ne 0 ];then
+	if ! $1 > /dev/null 2>&1; then
 		echo "SKIP: Could not $2"
 		exit $ksft_skip
 	fi
@@ -87,19 +86,36 @@ omtu=9000
 lmtu=1500
 rmtu=2000
 
+usage(){
+	echo "nft_flowtable.sh [OPTIONS]"
+	echo
+	echo "MTU options"
+	echo "   -o originator"
+	echo "   -l link"
+	echo "   -r responder"
+	exit 1
+}
+
 while getopts "o:l:r:" o
 do
 	case $o in
 		o) omtu=$OPTARG;;
 		l) lmtu=$OPTARG;;
 		r) rmtu=$OPTARG;;
+		*) usage;;
 	esac
 done
 
-ip -net nsr1 link set veth0 mtu $omtu
+if ! ip -net nsr1 link set veth0 mtu $omtu; then
+	exit 1
+fi
+
 ip -net ns1 link set eth0 mtu $omtu
 
-ip -net nsr2 link set veth1 mtu $rmtu
+if ! ip -net nsr2 link set veth1 mtu $rmtu; then
+	exit 1
+fi
+
 ip -net ns2 link set eth0 mtu $rmtu
 
 # transfer-net between nsr1 and nsr2.
@@ -120,7 +136,10 @@ for i in 1 2; do
   ip -net ns$i route add default via 10.0.$i.1
   ip -net ns$i addr add dead:$i::99/64 dev eth0
   ip -net ns$i route add default via dead:$i::1
-  ip netns exec ns$i sysctl net.ipv4.tcp_no_metrics_save=1 > /dev/null
+  if ! ip netns exec ns$i sysctl net.ipv4.tcp_no_metrics_save=1 > /dev/null; then
+	echo "ERROR: Check Originator/Responder values (problem during address addition)"
+	exit 1
+  fi
 
   # don't set ip DF bit for first two tests
   ip netns exec ns$i sysctl net.ipv4.ip_no_pmtu_disc=1 > /dev/null
@@ -178,15 +197,13 @@ if [ $? -ne 0 ]; then
 fi
 
 # test basic connectivity
-ip netns exec ns1 ping -c 1 -q 10.0.2.99 > /dev/null
-if [ $? -ne 0 ];then
+if ! ip netns exec ns1 ping -c 1 -q 10.0.2.99 > /dev/null; then
   echo "ERROR: ns1 cannot reach ns2" 1>&2
   bash
   exit 1
 fi
 
-ip netns exec ns2 ping -c 1 -q 10.0.1.99 > /dev/null
-if [ $? -ne 0 ];then
+if ! ip netns exec ns2 ping -c 1 -q 10.0.1.99 > /dev/null; then
   echo "ERROR: ns2 cannot reach ns1" 1>&2
   exit 1
 fi
@@ -203,7 +220,6 @@ ns2out=$(mktemp)
 make_file()
 {
 	name=$1
-	who=$2
 
 	SIZE=$((RANDOM % (1024 * 8)))
 	TSIZE=$((SIZE * 1024))
@@ -222,8 +238,7 @@ check_transfer()
 	out=$2
 	what=$3
 
-	cmp "$in" "$out" > /dev/null 2>&1
-	if [ $? -ne 0 ] ;then
+	if ! cmp "$in" "$out" > /dev/null 2>&1; then
 		echo "FAIL: file mismatch for $what" 1>&2
 		ls -l "$in"
 		ls -l "$out"
@@ -260,13 +275,11 @@ test_tcp_forwarding_ip()
 
 	wait
 
-	check_transfer "$ns1in" "$ns2out" "ns1 -> ns2"
-	if [ $? -ne 0 ];then
+	if ! check_transfer "$ns1in" "$ns2out" "ns1 -> ns2"; then
 		lret=1
 	fi
 
-	check_transfer "$ns2in" "$ns1out" "ns1 <- ns2"
-	if [ $? -ne 0 ];then
+	if ! check_transfer "$ns2in" "$ns1out" "ns1 <- ns2"; then
 		lret=1
 	fi
 
@@ -295,13 +308,12 @@ test_tcp_forwarding_nat()
 	return $lret
 }
 
-make_file "$ns1in" "ns1"
-make_file "$ns2in" "ns2"
+make_file "$ns1in"
+make_file "$ns2in"
 
 # First test:
 # No PMTU discovery, nsr1 is expected to fragment packets from ns1 to ns2 as needed.
-test_tcp_forwarding ns1 ns2
-if [ $? -eq 0 ] ;then
+if test_tcp_forwarding ns1 ns2; then
 	echo "PASS: flow offloaded for ns1/ns2"
 else
 	echo "FAIL: flow offload for ns1/ns2:" 1>&2
@@ -332,9 +344,7 @@ table ip nat {
 }
 EOF
 
-test_tcp_forwarding_nat ns1 ns2
-
-if [ $? -eq 0 ] ;then
+if test_tcp_forwarding_nat ns1 ns2; then
 	echo "PASS: flow offloaded for ns1/ns2 with NAT"
 else
 	echo "FAIL: flow offload for ns1/ns2 with NAT" 1>&2
@@ -346,8 +356,7 @@ fi
 # Same as second test, but with PMTU discovery enabled.
 handle=$(ip netns exec nsr1 nft -a list table inet filter | grep something-to-grep-for | cut -d \# -f 2)
 
-ip netns exec nsr1 nft delete rule inet filter forward $handle
-if [ $? -ne 0 ] ;then
+if ! ip netns exec nsr1 nft delete rule inet filter forward $handle; then
 	echo "FAIL: Could not delete large-packet accept rule"
 	exit 1
 fi
@@ -355,8 +364,7 @@ fi
 ip netns exec ns1 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null
 ip netns exec ns2 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null
 
-test_tcp_forwarding_nat ns1 ns2
-if [ $? -eq 0 ] ;then
+if test_tcp_forwarding_nat ns1 ns2; then
 	echo "PASS: flow offloaded for ns1/ns2 with NAT and pmtu discovery"
 else
 	echo "FAIL: flow offload for ns1/ns2 with NAT and pmtu discovery" 1>&2
@@ -402,8 +410,7 @@ ip -net ns2 route del 192.168.10.1 via 10.0.2.1
 ip -net ns2 route add default via 10.0.2.1
 ip -net ns2 route add default via dead:2::1
 
-test_tcp_forwarding ns1 ns2
-if [ $? -eq 0 ] ;then
+if test_tcp_forwarding ns1 ns2; then
 	echo "PASS: ipsec tunnel mode for ns1/ns2"
 else
 	echo "FAIL: ipsec tunnel mode for ns1/ns2"