Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

1 files changed, 101 insertions, 10 deletions

diff --git a/net/ipv6/xfrm6_input.c b/net/ipv6/xfrm6_input.c
index a52cb3fc6df5..04cbeefd8982 100644
--- a/net/ipv6/xfrm6_input.c
+++ b/net/ipv6/xfrm6_input.c
@@ -17,11 +17,6 @@
 #include <net/ipv6.h>
 #include <net/xfrm.h>
 
-int xfrm6_extract_input(struct xfrm_state *x, struct sk_buff *skb)
-{
-	return xfrm6_extract_header(skb);
-}
-
 int xfrm6_rcv_spi(struct sk_buff *skb, int nexthdr, __be32 spi,
 		  struct ip6_tnl *t)
 {
@@ -35,9 +30,12 @@ EXPORT_SYMBOL(xfrm6_rcv_spi);
 static int xfrm6_transport_finish2(struct net *net, struct sock *sk,
 				   struct sk_buff *skb)
 {
-	if (xfrm_trans_queue(skb, ip6_rcv_finish))
-		__kfree_skb(skb);
-	return -1;
+	if (xfrm_trans_queue(skb, ip6_rcv_finish)) {
+		kfree_skb(skb);
+		return NET_RX_DROP;
+	}
+
+	return 0;
 }
 
 int xfrm6_transport_finish(struct sk_buff *skb, int async)
@@ -60,13 +58,106 @@ int xfrm6_transport_finish(struct sk_buff *skb, int async)
 	if (xo && (xo->flags & XFRM_GRO)) {
 		skb_mac_header_rebuild(skb);
 		skb_reset_transport_header(skb);
-		return -1;
+		return 0;
 	}
 
 	NF_HOOK(NFPROTO_IPV6, NF_INET_PRE_ROUTING,
 		dev_net(skb->dev), NULL, skb, skb->dev, NULL,
 		xfrm6_transport_finish2);
-	return -1;
+	return 0;
+}
+
+/* If it's a keepalive packet, then just eat it.
+ * If it's an encapsulated packet, then pass it to the
+ * IPsec xfrm input.
+ * Returns 0 if skb passed to xfrm or was dropped.
+ * Returns >0 if skb should be passed to UDP.
+ * Returns <0 if skb should be resubmitted (-ret is protocol)
+ */
+int xfrm6_udp_encap_rcv(struct sock *sk, struct sk_buff *skb)
+{
+	struct udp_sock *up = udp_sk(sk);
+	struct udphdr *uh;
+	struct ipv6hdr *ip6h;
+	int len;
+	int ip6hlen = sizeof(struct ipv6hdr);
+
+	__u8 *udpdata;
+	__be32 *udpdata32;
+	__u16 encap_type = up->encap_type;
+
+	/* if this is not encapsulated socket, then just return now */
+	if (!encap_type)
+		return 1;
+
+	/* If this is a paged skb, make sure we pull up
+	 * whatever data we need to look at. */
+	len = skb->len - sizeof(struct udphdr);
+	if (!pskb_may_pull(skb, sizeof(struct udphdr) + min(len, 8)))
+		return 1;
+
+	/* Now we can get the pointers */
+	uh = udp_hdr(skb);
+	udpdata = (__u8 *)uh + sizeof(struct udphdr);
+	udpdata32 = (__be32 *)udpdata;
+
+	switch (encap_type) {
+	default:
+	case UDP_ENCAP_ESPINUDP:
+		/* Check if this is a keepalive packet.  If so, eat it. */
+		if (len == 1 && udpdata[0] == 0xff) {
+			goto drop;
+		} else if (len > sizeof(struct ip_esp_hdr) && udpdata32[0] != 0) {
+			/* ESP Packet without Non-ESP header */
+			len = sizeof(struct udphdr);
+		} else
+			/* Must be an IKE packet.. pass it through */
+			return 1;
+		break;
+	case UDP_ENCAP_ESPINUDP_NON_IKE:
+		/* Check if this is a keepalive packet.  If so, eat it. */
+		if (len == 1 && udpdata[0] == 0xff) {
+			goto drop;
+		} else if (len > 2 * sizeof(u32) + sizeof(struct ip_esp_hdr) &&
+			   udpdata32[0] == 0 && udpdata32[1] == 0) {
+
+			/* ESP Packet with Non-IKE marker */
+			len = sizeof(struct udphdr) + 2 * sizeof(u32);
+		} else
+			/* Must be an IKE packet.. pass it through */
+			return 1;
+		break;
+	}
+
+	/* At this point we are sure that this is an ESPinUDP packet,
+	 * so we need to remove 'len' bytes from the packet (the UDP
+	 * header and optional ESP marker bytes) and then modify the
+	 * protocol to ESP, and then call into the transform receiver.
+	 */
+	if (skb_unclone(skb, GFP_ATOMIC))
+		goto drop;
+
+	/* Now we can update and verify the packet length... */
+	ip6h = ipv6_hdr(skb);
+	ip6h->payload_len = htons(ntohs(ip6h->payload_len) - len);
+	if (skb->len < ip6hlen + len) {
+		/* packet is too small!?! */
+		goto drop;
+	}
+
+	/* pull the data buffer up to the ESP header and set the
+	 * transport header to point to ESP.  Keep UDP on the stack
+	 * for later.
+	 */
+	__skb_pull(skb, len);
+	skb_reset_transport_header(skb);
+
+	/* process ESP */
+	return xfrm6_rcv_encap(skb, IPPROTO_ESP, 0, encap_type);
+
+drop:
+	kfree_skb(skb);
+	return 0;
 }
 
 int xfrm6_rcv_tnl(struct sk_buff *skb, struct ip6_tnl *t)