Merge branch 'akpm' (incoming from Andrew)

Merge misc patches from Andrew Morton:

 - Florian has vanished so I appear to have become fbdev maintainer
   again :(

 - Joel and Mark are distracted to welcome to the new OCFS2 maintainer

 - The backlight queue

 - Small core kernel changes

 - lib/ updates

 - The rtc queue

 - Various random bits

* akpm: (164 commits)
  rtc: rtc-davinci: use devm_*() functions
  rtc: rtc-max8997: use devm_request_threaded_irq()
  rtc: rtc-max8907: use devm_request_threaded_irq()
  rtc: rtc-da9052: use devm_request_threaded_irq()
  rtc: rtc-wm831x: use devm_request_threaded_irq()
  rtc: rtc-tps80031: use devm_request_threaded_irq()
  rtc: rtc-lp8788: use devm_request_threaded_irq()
  rtc: rtc-coh901331: use devm_clk_get()
  rtc: rtc-vt8500: use devm_*() functions
  rtc: rtc-tps6586x: use devm_request_threaded_irq()
  rtc: rtc-imxdi: use devm_clk_get()
  rtc: rtc-cmos: use dev_warn()/dev_dbg() instead of printk()/pr_debug()
  rtc: rtc-pcf8583: use dev_warn() instead of printk()
  rtc: rtc-sun4v: use pr_warn() instead of printk()
  rtc: rtc-vr41xx: use dev_info() instead of printk()
  rtc: rtc-rs5c313: use pr_err() instead of printk()
  rtc: rtc-at91rm9200: use dev_dbg()/dev_err() instead of printk()/pr_debug()
  rtc: rtc-rs5c372: use dev_dbg()/dev_warn() instead of printk()/pr_debug()
  rtc: rtc-ds2404: use dev_err() instead of printk()
  rtc: rtc-efi: use dev_err()/dev_warn()/pr_err() instead of printk()
  ...

5 files changed, 94 insertions, 5 deletions

diff --git a/mm/Kconfig b/mm/Kconfig
index 308fdcaeed77..0b23db9a8791 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -258,6 +258,19 @@ config BOUNCE
 	def_bool y
 	depends on BLOCK && MMU && (ZONE_DMA || HIGHMEM)
 
+# On the 'tile' arch, USB OHCI needs the bounce pool since tilegx will often
+# have more than 4GB of memory, but we don't currently use the IOTLB to present
+# a 32-bit address to OHCI.  So we need to use a bounce pool instead.
+#
+# We also use the bounce pool to provide stable page writes for jbd.  jbd
+# initiates buffer writeback without locking the page or setting PG_writeback,
+# and fixing that behavior (a second time; jbd2 doesn't have this problem) is
+# a major rework effort.  Instead, use the bounce buffer to snapshot pages
+# (until jbd goes away).  The only jbd user is ext3.
+config NEED_BOUNCE_POOL
+	bool
+	default y if (TILE && USB_OHCI_HCD) || (BLK_DEV_INTEGRITY && JBD)
+
 config NR_QUICK
 	int
 	depends on QUICKLIST
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index d3ca2b3ee176..41733c5dc820 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -221,12 +221,23 @@ static ssize_t max_ratio_store(struct device *dev,
 }
 BDI_SHOW(max_ratio, bdi->max_ratio)
 
+static ssize_t stable_pages_required_show(struct device *dev,
+					  struct device_attribute *attr,
+					  char *page)
+{
+	struct backing_dev_info *bdi = dev_get_drvdata(dev);
+
+	return snprintf(page, PAGE_SIZE-1, "%d\n",
+			bdi_cap_stable_pages_required(bdi) ? 1 : 0);
+}
+
 #define __ATTR_RW(attr) __ATTR(attr, 0644, attr##_show, attr##_store)
 
 static struct device_attribute bdi_dev_attrs[] = {
 	__ATTR_RW(read_ahead_kb),
 	__ATTR_RW(min_ratio),
 	__ATTR_RW(max_ratio),
+	__ATTR_RO(stable_pages_required),
 	__ATTR_NULL,
 };
 
diff --git a/mm/bounce.c b/mm/bounce.c
index 042086775561..5f8901768602 100644
--- a/mm/bounce.c
+++ b/mm/bounce.c
@@ -178,8 +178,45 @@ static void bounce_end_io_read_isa(struct bio *bio, int err)
 	__bounce_end_io_read(bio, isa_page_pool, err);
 }
 
+#ifdef CONFIG_NEED_BOUNCE_POOL
+static int must_snapshot_stable_pages(struct request_queue *q, struct bio *bio)
+{
+	struct page *page;
+	struct backing_dev_info *bdi;
+	struct address_space *mapping;
+	struct bio_vec *from;
+	int i;
+
+	if (bio_data_dir(bio) != WRITE)
+		return 0;
+
+	if (!bdi_cap_stable_pages_required(&q->backing_dev_info))
+		return 0;
+
+	/*
+	 * Based on the first page that has a valid mapping, decide whether or
+	 * not we have to employ bounce buffering to guarantee stable pages.
+	 */
+	bio_for_each_segment(from, bio, i) {
+		page = from->bv_page;
+		mapping = page_mapping(page);
+		if (!mapping)
+			continue;
+		bdi = mapping->backing_dev_info;
+		return mapping->host->i_sb->s_flags & MS_SNAP_STABLE;
+	}
+
+	return 0;
+}
+#else
+static int must_snapshot_stable_pages(struct request_queue *q, struct bio *bio)
+{
+	return 0;
+}
+#endif /* CONFIG_NEED_BOUNCE_POOL */
+
 static void __blk_queue_bounce(struct request_queue *q, struct bio **bio_orig,
-			       mempool_t *pool)
+			       mempool_t *pool, int force)
 {
 	struct page *page;
 	struct bio *bio = NULL;
@@ -192,7 +229,7 @@ static void __blk_queue_bounce(struct request_queue *q, struct bio **bio_orig,
 		/*
 		 * is destination page below bounce pfn?
 		 */
-		if (page_to_pfn(page) <= queue_bounce_pfn(q))
+		if (page_to_pfn(page) <= queue_bounce_pfn(q) && !force)
 			continue;
 
 		/*
@@ -270,6 +307,7 @@ static void __blk_queue_bounce(struct request_queue *q, struct bio **bio_orig,
 
 void blk_queue_bounce(struct request_queue *q, struct bio **bio_orig)
 {
+	int must_bounce;
 	mempool_t *pool;
 
 	/*
@@ -278,13 +316,15 @@ void blk_queue_bounce(struct request_queue *q, struct bio **bio_orig)
 	if (!bio_has_data(*bio_orig))
 		return;
 
+	must_bounce = must_snapshot_stable_pages(q, *bio_orig);
+
 	/*
 	 * for non-isa bounce case, just check if the bounce pfn is equal
 	 * to or bigger than the highest pfn in the system -- in that case,
 	 * don't waste time iterating over bio segments
 	 */
 	if (!(q->bounce_gfp & GFP_DMA)) {
-		if (queue_bounce_pfn(q) >= blk_max_pfn)
+		if (queue_bounce_pfn(q) >= blk_max_pfn && !must_bounce)
 			return;
 		pool = page_pool;
 	} else {
@@ -295,7 +335,7 @@ void blk_queue_bounce(struct request_queue *q, struct bio **bio_orig)
 	/*
 	 * slow path
 	 */
-	__blk_queue_bounce(q, bio_orig, pool);
+	__blk_queue_bounce(q, bio_orig, pool, must_bounce);
 }
 
 EXPORT_SYMBOL(blk_queue_bounce);
diff --git a/mm/filemap.c b/mm/filemap.c
index 24a7ea583f0c..c610076c30e1 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1728,6 +1728,7 @@ int filemap_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
 	 * see the dirty page and writeprotect it again.
 	 */
 	set_page_dirty(page);
+	wait_for_stable_page(page);
 out:
 	sb_end_pagefault(inode->i_sb);
 	return ret;
@@ -2274,7 +2275,7 @@ repeat:
 		return NULL;
 	}
 found:
-	wait_on_page_writeback(page);
+	wait_for_stable_page(page);
 	return page;
 }
 EXPORT_SYMBOL(grab_cache_page_write_begin);
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 66a0024becd9..7300c9d5e1d9 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -2290,3 +2290,27 @@ int mapping_tagged(struct address_space *mapping, int tag)
 	return radix_tree_tagged(&mapping->page_tree, tag);
 }
 EXPORT_SYMBOL(mapping_tagged);
+
+/**
+ * wait_for_stable_page() - wait for writeback to finish, if necessary.
+ * @page:	The page to wait on.
+ *
+ * This function determines if the given page is related to a backing device
+ * that requires page contents to be held stable during writeback.  If so, then
+ * it will wait for any pending writeback to complete.
+ */
+void wait_for_stable_page(struct page *page)
+{
+	struct address_space *mapping = page_mapping(page);
+	struct backing_dev_info *bdi = mapping->backing_dev_info;
+
+	if (!bdi_cap_stable_pages_required(bdi))
+		return;
+#ifdef CONFIG_NEED_BOUNCE_POOL
+	if (mapping->host->i_sb->s_flags & MS_SNAP_STABLE)
+		return;
+#endif /* CONFIG_NEED_BOUNCE_POOL */
+
+	wait_on_page_writeback(page);
+}
+EXPORT_SYMBOL_GPL(wait_for_stable_page);